diff --git a/f1/usart/include/usart1.h b/f1/usart/include/usart1.h
index 2219fcb743cdfaa0041ed0f24313e52ea6c21d81..c3471f3b5b44da21a8a10701cc280f911939bbc5 100644
--- a/f1/usart/include/usart1.h
+++ b/f1/usart/include/usart1.h
@@ -1,14 +1,14 @@
-#ifndef USART1_F1_H
-#define USART1_F1_H
+#ifndef UART1_F1_H
+#define UART1_F1_H
#include "stm32f1xx_hal.h"
#include "usart_common.h"
#include "comm.h"
/* public functions */
-void usart1_init(TComm *comm_dev,USART_InitTypeDef *conf,TUSART_IRQ_Priorities *priorities);
-void usart1_config(TComm *comm_dev,USART_InitTypeDef *conf);
-void usart1_set_priorities(TComm *comm_dev,TUSART_IRQ_Priorities *priorities);
+void usart1_init(TComm *comm_dev,UART_InitTypeDef *conf,TUART_IRQ_Priorities *priorities);
+void usart1_config(TComm *comm_dev,UART_InitTypeDef *conf);
+void usart1_set_priorities(TComm *comm_dev,TUART_IRQ_Priorities *priorities);
void usart1_set_baudrate(TComm *comm_dev,unsigned int baudrate);
/* IRQ functions */
unsigned char usart1_send_irq(unsigned char first_byte);
diff --git a/f1/usart/include/usart2.h b/f1/usart/include/usart2.h
index 928f4ab83732e1a05716cbb9383b7722693c8a8d..1ab8a318d81a920b01cf651d20ae113ae39762b1 100644
--- a/f1/usart/include/usart2.h
+++ b/f1/usart/include/usart2.h
@@ -1,14 +1,14 @@
-#ifndef USART2_F1_H
-#define USART2_F1_H
+#ifndef UART2_F1_H
+#define UART2_F1_H
#include "stm32f1xx_hal.h"
#include "usart_common.h"
#include "comm.h"
/* public functions */
-void usart2_init(TComm *comm_dev,USART_InitTypeDef *conf,TUSART_IRQ_Priorities *priorities);
-void usart2_config(TComm *comm_dev,USART_InitTypeDef *conf);
-void usart2_set_priorities(TComm *comm_dev,TUSART_IRQ_Priorities *priorities);
+void usart2_init(TComm *comm_dev,UART_InitTypeDef *conf,TUART_IRQ_Priorities *priorities);
+void usart2_config(TComm *comm_dev,UART_InitTypeDef *conf);
+void usart2_set_priorities(TComm *comm_dev,TUART_IRQ_Priorities *priorities);
void usart2_set_baudrate(TComm *comm_dev,unsigned int baudrate);
/* IRQ functions */
unsigned char usart2_send_irq(unsigned char first_byte);
diff --git a/f1/usart/include/usart3.h b/f1/usart/include/usart3.h
index 5d60161a40b521608153bbeb54b16e4e31994737..9bc0ee15d184b015e64a56298bc9151e129e08a3 100644
--- a/f1/usart/include/usart3.h
+++ b/f1/usart/include/usart3.h
@@ -1,5 +1,5 @@
-#ifndef USART3_F1_H
-#define USART3_F1_H
+#ifndef UART3_F1_H
+#define UART3_F1_H
#ifdef __cplusplus
extern "C" {
@@ -11,22 +11,20 @@ extern "C" {
/* public functions */
-void usart3_init(TComm *comm_dev,USART_InitTypeDef *conf,TUSART_IRQ_Priorities *priorities);
-void usart3_config(TComm *comm_dev,USART_InitTypeDef *conf);
-void usart3_set_priorities(TComm *comm_dev,TUSART_IRQ_Priorities *priorities);
+void usart3_init(TComm *comm_dev,UART_InitTypeDef *conf,TUART_IRQ_Priorities *priorities);
+void usart3_config(TComm *comm_dev,UART_InitTypeDef *conf);
+void usart3_set_priorities(TComm *comm_dev,TUART_IRQ_Priorities *priorities);
void usart3_set_baudrate(TComm *comm_dev,unsigned int baudrate);
/* IRQ functions */
unsigned char usart3_send_irq(unsigned char first_byte);
unsigned char usart3_enable_tx_irq(void);
unsigned char usart3_receive_irq(void);
unsigned char usart3_cancel_receive_irq(void);
-void USART_IRQHandler(void);
+void UART_IRQHandler(void);
/* DMA functions */
unsigned char usart3_send_dma(unsigned char *data,unsigned short int length);
unsigned char usart3_receive_dma(unsigned char *data,unsigned short int length);
unsigned char usart3_cancel_receive_dma(void);
-void USART_DMA_TX_IRQHandler(void);
-void USART_DMA_RX_IRQHandler(void);
#ifdef __cplusplus
}
diff --git a/f1/usart/include/usart_common.h b/f1/usart/include/usart_common.h
index 0933df10fc8da73a03e7b0c03d2470a9afb267fa..443205dde5c55f1fd8b5eda7662243b14f5715d8 100644
--- a/f1/usart/include/usart_common.h
+++ b/f1/usart/include/usart_common.h
@@ -1,5 +1,5 @@
-#ifndef USART_COMMON_F1_H
-#define USART_COMMON_F1_H
+#ifndef UART_COMMON_F1_H
+#define UART_COMMON_F1_H
typedef struct
{
@@ -9,6 +9,6 @@ typedef struct
unsigned char dma_rx_subpriority;
unsigned char dma_tx_priority;
unsigned char dma_tx_subpriority;
-}TUSART_IRQ_Priorities;
+}TUART_IRQ_Priorities;
#endif
diff --git a/f1/usart/src/usart1.c b/f1/usart/src/usart1.c
index 88660e9bf4ff6ac6bd1dccc0290e740a6795728e..71280c346fc77601bdad801d7092c89043169254 100644
--- a/f1/usart/src/usart1.c
+++ b/f1/usart/src/usart1.c
@@ -1,97 +1,97 @@
#include "usart1.h"
-#define USART USART1
-#define USART_ENABLE_CLK __HAL_RCC_USART1_CLK_ENABLE()
-#define USART_IRQn USART1_IRQn
-#define USART_IRQHandler USART1_IRQHandler
+#define UART USART1
+#define UART_ENABLE_CLK __HAL_RCC_USART1_CLK_ENABLE()
+#define UART_IRQn USART1_IRQn
+#define UART_IRQHandler USART1_IRQHandler
-#define USART_TX_PIN GPIO_PIN_9
-#define USART_TX_GPIO_PORT GPIOA
-#define USART_ENABLE_TX_GPIO_CLK __HAL_RCC_GPIOA_CLK_ENABLE()
+#define UART_TX_PIN GPIO_PIN_9
+#define UART_TX_GPIO_PORT GPIOA
+#define UART_ENABLE_TX_GPIO_CLK __HAL_RCC_GPIOA_CLK_ENABLE()
-#define USART_RX_PIN GPIO_PIN_10
-#define USART_RX_GPIO_PORT GPIOA
-#define USART_ENABLE_RX_GPIO_CLK __HAL_RCC_GPIOA_CLK_ENABLE()
+#define UART_RX_PIN GPIO_PIN_10
+#define UART_RX_GPIO_PORT GPIOA
+#define UART_ENABLE_RX_GPIO_CLK __HAL_RCC_GPIOA_CLK_ENABLE()
/* DMA configuration */
-#define USART_DMA DMA1
-#define USART_ENABLE_DMA_CLK __HAL_RCC_DMA1_CLK_ENABLE()
+#define UART_DMA DMA1
+#define UART_ENABLE_DMA_CLK __HAL_RCC_DMA1_CLK_ENABLE()
-#define USART_TX_DMA_CHANNEL DMA1_Channel4
-#define USART_RX_DMA_CHANNEL DMA1_Channel5
+#define UART_TX_DMA_CHANNEL DMA1_Channel4
+#define UART_RX_DMA_CHANNEL DMA1_Channel5
-#define USART_DMA_TX_IRQn DMA1_Channel4_IRQn
-#define USART_DMA_RX_IRQn DMA1_Channel5_IRQn
-#define USART_DMA_TX_IRQHandler DMA1_Channel4_IRQHandler
-#define USART_DMA_RX_IRQHandler DMA1_Channel5_IRQHandler
+#define UART_DMA_TX_IRQn DMA1_Channel4_IRQn
+#define UART_DMA_RX_IRQn DMA1_Channel5_IRQn
+#define UART_DMA_TX_IRQHandler DMA1_Channel4_IRQHandler
+#define UART_DMA_RX_IRQHandler DMA1_Channel5_IRQHandler
// private variables
-USART_HandleTypeDef Uart1Handle;
+UART_HandleTypeDef Uart1Handle;
DMA_HandleTypeDef usart1_hdma_tx;
DMA_HandleTypeDef usart1_hdma_rx;
TComm *usart1_comm_dev;
// interrupt handlers
-void USART_IRQHandler(void)
+void UART_IRQHandler(void)
{
unsigned char data,ret;
uint32_t source;
- if(__HAL_USART_GET_FLAG(&Uart1Handle, USART_FLAG_RXNE) != RESET)
+ if(__HAL_UART_GET_FLAG(&Uart1Handle, UART_FLAG_RXNE) != RESET)
{
- if(__HAL_USART_GET_IT_SOURCE(&Uart1Handle, USART_IT_RXNE) !=RESET)
+ if(__HAL_UART_GET_IT_SOURCE(&Uart1Handle, UART_IT_RXNE) !=RESET)
{
- __HAL_USART_CLEAR_FLAG(&Uart1Handle,USART_FLAG_RXNE);
+ __HAL_UART_CLEAR_FLAG(&Uart1Handle,UART_FLAG_RXNE);
data=(uint8_t)(Uart1Handle.Instance->DR & (uint8_t)0x00FF);
// call the reception function
if(!comm_do_irq_receive(usart1_comm_dev,data))
- __HAL_USART_DISABLE_IT(&Uart1Handle, USART_IT_RXNE);
+ __HAL_UART_DISABLE_IT(&Uart1Handle, UART_IT_RXNE);
}
}
- if(__HAL_USART_GET_FLAG(&Uart1Handle, USART_FLAG_TC) != RESET)
+ if(__HAL_UART_GET_FLAG(&Uart1Handle, UART_FLAG_TC) != RESET)
{
- if(__HAL_USART_GET_IT_SOURCE(&Uart1Handle, USART_IT_TC) !=RESET)
+ if(__HAL_UART_GET_IT_SOURCE(&Uart1Handle, UART_IT_TC) !=RESET)
{
- __HAL_USART_CLEAR_FLAG(&Uart1Handle,USART_FLAG_TC);
+ __HAL_UART_CLEAR_FLAG(&Uart1Handle,UART_FLAG_TC);
ret=comm_do_irq_send(usart1_comm_dev,&data);
if(ret==0x01)
Uart1Handle.Instance->DR=data;
else if(ret==0x00)
- __HAL_USART_DISABLE_IT(&Uart1Handle, USART_IT_TC);
+ __HAL_UART_DISABLE_IT(&Uart1Handle, UART_IT_TC);
}
}
- if(__HAL_USART_GET_FLAG(&Uart1Handle, USART_FLAG_PE) != RESET)// parity error
+ if(__HAL_UART_GET_FLAG(&Uart1Handle, UART_FLAG_PE) != RESET)// parity error
{
- if(__HAL_USART_GET_IT_SOURCE(&Uart1Handle, USART_IT_PE) !=RESET)
+ if(__HAL_UART_GET_IT_SOURCE(&Uart1Handle, UART_IT_PE) !=RESET)
{
- __HAL_USART_CLEAR_PEFLAG(&Uart1Handle);
+ __HAL_UART_CLEAR_PEFLAG(&Uart1Handle);
}
}
- source=__HAL_USART_GET_IT_SOURCE(&Uart1Handle, USART_IT_ERR);
- if(__HAL_USART_GET_FLAG(&Uart1Handle, USART_FLAG_FE) != RESET)// frame error
+ source=__HAL_UART_GET_IT_SOURCE(&Uart1Handle, UART_IT_ERR);
+ if(__HAL_UART_GET_FLAG(&Uart1Handle, UART_FLAG_FE) != RESET)// frame error
{
if(source !=RESET)
{
- __HAL_USART_CLEAR_FEFLAG(&Uart1Handle);
+ __HAL_UART_CLEAR_FEFLAG(&Uart1Handle);
}
}
- if(__HAL_USART_GET_FLAG(&Uart1Handle, USART_FLAG_NE) != RESET)// noise error
+ if(__HAL_UART_GET_FLAG(&Uart1Handle, UART_FLAG_NE) != RESET)// noise error
{
if(source !=RESET)
{
- __HAL_USART_CLEAR_NEFLAG(&Uart1Handle);
+ __HAL_UART_CLEAR_NEFLAG(&Uart1Handle);
}
}
- if(__HAL_USART_GET_FLAG(&Uart1Handle, USART_FLAG_ORE) != RESET)// overrun error
+ if(__HAL_UART_GET_FLAG(&Uart1Handle, UART_FLAG_ORE) != RESET)// overrun error
{
if(source !=RESET)
{
- __HAL_USART_CLEAR_OREFLAG(&Uart1Handle);
+ __HAL_UART_CLEAR_OREFLAG(&Uart1Handle);
}
}
}
-void USART_DMA_TX_IRQHandler(void)
+void UART_DMA_TX_IRQHandler(void)
{
if(__HAL_DMA_GET_FLAG(Uart1Handle.hdmatx,__HAL_DMA_GET_TE_FLAG_INDEX(Uart1Handle.hdmatx)) != RESET)
{
@@ -129,7 +129,7 @@ void USART_DMA_TX_IRQHandler(void)
}
}
-void USART_DMA_RX_IRQHandler(void)
+void UART_DMA_RX_IRQHandler(void)
{
if(__HAL_DMA_GET_FLAG(Uart1Handle.hdmarx,__HAL_DMA_GET_TE_FLAG_INDEX(Uart1Handle.hdmarx)) != RESET)
{
@@ -168,36 +168,36 @@ void USART_DMA_RX_IRQHandler(void)
}
/* public functions*/
-void usart1_init(TComm *comm_dev,USART_InitTypeDef *conf,TUSART_IRQ_Priorities *priorities)
+void usart1_init(TComm *comm_dev,UART_InitTypeDef *conf,TUART_IRQ_Priorities *priorities)
{
GPIO_InitTypeDef GPIO_InitStructure;
/* Enable GPIO clock */
- USART_ENABLE_TX_GPIO_CLK;
- USART_ENABLE_RX_GPIO_CLK;
- USART_ENABLE_DMA_CLK;
+ UART_ENABLE_TX_GPIO_CLK;
+ UART_ENABLE_RX_GPIO_CLK;
+ UART_ENABLE_DMA_CLK;
// configure the GPIO pins
- USART_ENABLE_CLK;
+ UART_ENABLE_CLK;
- /* Configure USART Tx and Rx as alternate function push-pull */
- GPIO_InitStructure.Pin = USART_TX_PIN;
+ /* Configure UART Tx and Rx as alternate function push-pull */
+ GPIO_InitStructure.Pin = UART_TX_PIN;
GPIO_InitStructure.Mode = GPIO_MODE_AF_PP;
GPIO_InitStructure.Speed = GPIO_SPEED_HIGH;
- HAL_GPIO_Init(USART_TX_GPIO_PORT, &GPIO_InitStructure);
+ HAL_GPIO_Init(UART_TX_GPIO_PORT, &GPIO_InitStructure);
- GPIO_InitStructure.Pin = USART_RX_PIN;
+ GPIO_InitStructure.Pin = UART_RX_PIN;
GPIO_InitStructure.Pull = GPIO_NOPULL;
GPIO_InitStructure.Mode = GPIO_MODE_INPUT;
- HAL_GPIO_Init(USART_RX_GPIO_PORT, &GPIO_InitStructure);
+ HAL_GPIO_Init(UART_RX_GPIO_PORT, &GPIO_InitStructure);
- Uart1Handle.Instance = USART;
+ Uart1Handle.Instance = UART;
usart1_config(comm_dev,conf);
if(comm_dev->use_dma)
{
// configure the DMA channels
- usart1_hdma_tx.Instance = USART_TX_DMA_CHANNEL;
+ usart1_hdma_tx.Instance = UART_TX_DMA_CHANNEL;
usart1_hdma_tx.Init.Direction = DMA_MEMORY_TO_PERIPH;
usart1_hdma_tx.Init.PeriphInc = DMA_PINC_DISABLE;
usart1_hdma_tx.Init.MemInc = DMA_MINC_ENABLE;
@@ -208,11 +208,11 @@ void usart1_init(TComm *comm_dev,USART_InitTypeDef *conf,TUSART_IRQ_Priorities *
HAL_DMA_Init(&usart1_hdma_tx);
- /* Associate the initialized DMA handle to the USART handle */
+ /* Associate the initialized DMA handle to the UART handle */
__HAL_LINKDMA(&Uart1Handle, hdmatx, usart1_hdma_tx);
/* Configure the DMA handler for reception process */
- usart1_hdma_rx.Instance = USART_RX_DMA_CHANNEL;
+ usart1_hdma_rx.Instance = UART_RX_DMA_CHANNEL;
usart1_hdma_rx.Init.Direction = DMA_PERIPH_TO_MEMORY;
usart1_hdma_rx.Init.PeriphInc = DMA_PINC_DISABLE;
usart1_hdma_rx.Init.MemInc = DMA_MINC_ENABLE;
@@ -223,7 +223,7 @@ void usart1_init(TComm *comm_dev,USART_InitTypeDef *conf,TUSART_IRQ_Priorities *
HAL_DMA_Init(&usart1_hdma_rx);
- /* Associate the initialized DMA handle to the the USART handle */
+ /* Associate the initialized DMA handle to the the UART handle */
__HAL_LINKDMA(&Uart1Handle, hdmarx, usart1_hdma_rx);
}
usart1_set_priorities(comm_dev,priorities);
@@ -248,43 +248,42 @@ void usart1_init(TComm *comm_dev,USART_InitTypeDef *conf,TUSART_IRQ_Priorities *
usart1_comm_dev=comm_dev;
}
-void usart1_config(TComm *comm_dev,USART_InitTypeDef *conf)
+void usart1_config(TComm *comm_dev,UART_InitTypeDef *conf)
{
Uart1Handle.Init.BaudRate = conf->BaudRate;
Uart1Handle.Init.WordLength = conf->WordLength;
Uart1Handle.Init.StopBits = conf->StopBits;
Uart1Handle.Init.Parity = conf->Parity;
Uart1Handle.Init.Mode = conf->Mode;
- Uart1Handle.Init.CLKPolarity = conf->CLKPolarity;
- Uart1Handle.Init.CLKPhase = conf->CLKPhase;
- Uart1Handle.Init.CLKLastBit = conf->CLKLastBit;
- HAL_USART_Init(&Uart1Handle);
+ Uart1Handle.Init.HwFlowCtl = conf->HwFlowCtl;
+ Uart1Handle.Init.OverSampling = conf->OverSampling;
+ HAL_UART_Init(&Uart1Handle);
}
-void usart1_set_priorities(TComm *comm_dev,TUSART_IRQ_Priorities *priorities)
+void usart1_set_priorities(TComm *comm_dev,TUART_IRQ_Priorities *priorities)
{
- HAL_NVIC_SetPriority(USART_IRQn, priorities->irq_priority,priorities->irq_subpriority);
- HAL_NVIC_EnableIRQ(USART_IRQn);
+ HAL_NVIC_SetPriority(UART_IRQn, priorities->irq_priority,priorities->irq_subpriority);
+ HAL_NVIC_EnableIRQ(UART_IRQn);
if(comm_dev->use_dma)
{
- HAL_NVIC_SetPriority(USART_DMA_TX_IRQn, priorities->dma_tx_priority,priorities->dma_tx_subpriority);
- HAL_NVIC_EnableIRQ(USART_DMA_TX_IRQn);
- HAL_NVIC_SetPriority(USART_DMA_RX_IRQn, priorities->dma_rx_priority,priorities->dma_rx_subpriority);
- HAL_NVIC_EnableIRQ(USART_DMA_RX_IRQn);
+ HAL_NVIC_SetPriority(UART_DMA_TX_IRQn, priorities->dma_tx_priority,priorities->dma_tx_subpriority);
+ HAL_NVIC_EnableIRQ(UART_DMA_TX_IRQn);
+ HAL_NVIC_SetPriority(UART_DMA_RX_IRQn, priorities->dma_rx_priority,priorities->dma_rx_subpriority);
+ HAL_NVIC_EnableIRQ(UART_DMA_RX_IRQn);
}
}
void usart1_set_baudrate(TComm *comm_dev,unsigned int baudrate)
{
Uart1Handle.Init.BaudRate = baudrate;
- HAL_USART_Init(&Uart1Handle);
+ HAL_UART_Init(&Uart1Handle);
}
/* IRQ functions */
unsigned char usart1_send_irq(unsigned char first_byte)
{
- __HAL_USART_CLEAR_FLAG(&Uart1Handle,USART_FLAG_TC);
- __HAL_USART_ENABLE_IT(&Uart1Handle, USART_IT_TC);
+ __HAL_UART_CLEAR_FLAG(&Uart1Handle,UART_FLAG_TC);
+ __HAL_UART_ENABLE_IT(&Uart1Handle, UART_IT_TC);
Uart1Handle.Instance->DR=first_byte;
return 0x00;
@@ -292,8 +291,8 @@ unsigned char usart1_send_irq(unsigned char first_byte)
unsigned char usart1_enable_tx_irq(void)
{
- __HAL_USART_CLEAR_FLAG(&Uart1Handle,USART_FLAG_TC);
- __HAL_USART_ENABLE_IT(&Uart1Handle, USART_IT_TC);
+ __HAL_UART_CLEAR_FLAG(&Uart1Handle,UART_FLAG_TC);
+ __HAL_UART_ENABLE_IT(&Uart1Handle, UART_IT_TC);
return 0x00;
}
@@ -301,7 +300,7 @@ unsigned char usart1_enable_tx_irq(void)
unsigned char usart1_receive_irq(void)
{
/* enable the rx interrupt */
- __HAL_USART_ENABLE_IT(&Uart1Handle, USART_IT_RXNE);
+ __HAL_UART_ENABLE_IT(&Uart1Handle, UART_IT_RXNE);
return 0x00;
}
@@ -309,7 +308,7 @@ unsigned char usart1_receive_irq(void)
unsigned char usart1_cancel_receive_irq(void)
{
/* disable the rx interrupt */
- __HAL_USART_DISABLE_IT(&Uart1Handle, USART_IT_RXNE);
+ __HAL_UART_DISABLE_IT(&Uart1Handle, UART_IT_RXNE);
return 0x00;
}
@@ -319,9 +318,9 @@ unsigned char usart1_send_dma(unsigned char *data,unsigned short int length)
{
HAL_DMA_Start_IT(Uart1Handle.hdmatx,(uint32_t)data,(uint32_t)&Uart1Handle.Instance->DR,length);
/* Clear the TC flag in the SR register by writing 0 to it */
- __HAL_USART_CLEAR_FLAG(&Uart1Handle,USART_FLAG_TC);
+ __HAL_UART_CLEAR_FLAG(&Uart1Handle,UART_FLAG_TC);
/* Enable the DMA transfer for transmit request by setting the DMAT bit
- in the USART CR3 register */
+ in the UART CR3 register */
SET_BIT(Uart1Handle.Instance->CR3, USART_CR3_DMAT);
return 0x00;
diff --git a/f1/usart/src/usart2.c b/f1/usart/src/usart2.c
index cc9517b577a18e335cf7809c429b83e7d299918a..2f98209bfab3e3b5fd672a58146a53ccc3ba14bd 100644
--- a/f1/usart/src/usart2.c
+++ b/f1/usart/src/usart2.c
@@ -1,97 +1,97 @@
#include "usart2.h"
-#define USART USART2
-#define USART_ENABLE_CLK __HAL_RCC_USART2_CLK_ENABLE()
-#define USART_IRQn USART2_IRQn
-#define USART_IRQHandler USART2_IRQHandler
+#define UART USART2
+#define UART_ENABLE_CLK __HAL_RCC_USART2_CLK_ENABLE()
+#define UART_IRQn USART2_IRQn
+#define UART_IRQHandler USART2_IRQHandler
-#define USART_TX_PIN GPIO_PIN_2
-#define USART_TX_GPIO_PORT GPIOA
-#define USART_ENABLE_TX_GPIO_CLK __HAL_RCC_GPIOA_CLK_ENABLE()
+#define UART_TX_PIN GPIO_PIN_2
+#define UART_TX_GPIO_PORT GPIOA
+#define UART_ENABLE_TX_GPIO_CLK __HAL_RCC_GPIOA_CLK_ENABLE()
-#define USART_RX_PIN GPIO_PIN_3
-#define USART_RX_GPIO_PORT GPIOA
-#define USART_ENABLE_RX_GPIO_CLK __HAL_RCC_GPIOA_CLK_ENABLE()
+#define UART_RX_PIN GPIO_PIN_3
+#define UART_RX_GPIO_PORT GPIOA
+#define UART_ENABLE_RX_GPIO_CLK __HAL_RCC_GPIOA_CLK_ENABLE()
/* DMA configuration */
-#define USART_DMA DMA1
-#define USART_ENABLE_DMA_CLK __HAL_RCC_DMA1_CLK_ENABLE()
+#define UART_DMA DMA1
+#define UART_ENABLE_DMA_CLK __HAL_RCC_DMA1_CLK_ENABLE()
-#define USART_TX_DMA_CHANNEL DMA1_Channel7
-#define USART_RX_DMA_CHANNEL DMA1_Channel6
+#define UART_TX_DMA_CHANNEL DMA1_Channel7
+#define UART_RX_DMA_CHANNEL DMA1_Channel6
-#define USART_DMA_TX_IRQn DMA1_Channel7_IRQn
-#define USART_DMA_RX_IRQn DMA1_Channel6_IRQn
-#define USART_DMA_TX_IRQHandler DMA1_Channel7_IRQHandler
-#define USART_DMA_RX_IRQHandler DMA1_Channel6_IRQHandler
+#define UART_DMA_TX_IRQn DMA1_Channel7_IRQn
+#define UART_DMA_RX_IRQn DMA1_Channel6_IRQn
+#define UART_DMA_TX_IRQHandler DMA1_Channel7_IRQHandler
+#define UART_DMA_RX_IRQHandler DMA1_Channel6_IRQHandler
// private variables
-USART_HandleTypeDef Uart2Handle;
+UART_HandleTypeDef Uart2Handle;
DMA_HandleTypeDef usart2_hdma_tx;
DMA_HandleTypeDef usart2_hdma_rx;
TComm *usart2_comm_dev;
// interrupt handlers
-void USART_IRQHandler(void)
+void UART_IRQHandler(void)
{
unsigned char data,ret;
uint32_t source;
- if(__HAL_USART_GET_FLAG(&Uart2Handle, USART_FLAG_RXNE) != RESET)
+ if(__HAL_UART_GET_FLAG(&Uart2Handle, UART_FLAG_RXNE) != RESET)
{
- if(__HAL_USART_GET_IT_SOURCE(&Uart2Handle, USART_IT_RXNE) !=RESET)
+ if(__HAL_UART_GET_IT_SOURCE(&Uart2Handle, UART_IT_RXNE) !=RESET)
{
- __HAL_USART_CLEAR_FLAG(&Uart2Handle,USART_FLAG_RXNE);
+ __HAL_UART_CLEAR_FLAG(&Uart2Handle,UART_FLAG_RXNE);
data=(uint8_t)(Uart2Handle.Instance->DR & (uint8_t)0x00FF);
// call the reception function
if(!comm_do_irq_receive(usart2_comm_dev,data))
- __HAL_USART_DISABLE_IT(&Uart2Handle, USART_IT_RXNE);
+ __HAL_UART_DISABLE_IT(&Uart2Handle, UART_IT_RXNE);
}
}
- if(__HAL_USART_GET_FLAG(&Uart2Handle, USART_FLAG_TC) != RESET)
+ if(__HAL_UART_GET_FLAG(&Uart2Handle, UART_FLAG_TC) != RESET)
{
- if(__HAL_USART_GET_IT_SOURCE(&Uart2Handle, USART_IT_TC) !=RESET)
+ if(__HAL_UART_GET_IT_SOURCE(&Uart2Handle, UART_IT_TC) !=RESET)
{
- __HAL_USART_CLEAR_FLAG(&Uart2Handle,USART_FLAG_TC);
+ __HAL_UART_CLEAR_FLAG(&Uart2Handle,UART_FLAG_TC);
ret=comm_do_irq_send(usart2_comm_dev,&data);
if(ret==0x01)
Uart2Handle.Instance->DR=data;
else if(ret==0x00)
- __HAL_USART_DISABLE_IT(&Uart2Handle, USART_IT_TC);
+ __HAL_UART_DISABLE_IT(&Uart2Handle, UART_IT_TC);
}
}
- if(__HAL_USART_GET_FLAG(&Uart2Handle, USART_FLAG_PE) != RESET)// parity error
+ if(__HAL_UART_GET_FLAG(&Uart2Handle, UART_FLAG_PE) != RESET)// parity error
{
- if(__HAL_USART_GET_IT_SOURCE(&Uart2Handle, USART_IT_PE) !=RESET)
+ if(__HAL_UART_GET_IT_SOURCE(&Uart2Handle, UART_IT_PE) !=RESET)
{
- __HAL_USART_CLEAR_PEFLAG(&Uart2Handle);
+ __HAL_UART_CLEAR_PEFLAG(&Uart2Handle);
}
}
- source=__HAL_USART_GET_IT_SOURCE(&Uart2Handle, USART_IT_ERR);
- if(__HAL_USART_GET_FLAG(&Uart2Handle, USART_FLAG_FE) != RESET)// frame error
+ source=__HAL_UART_GET_IT_SOURCE(&Uart2Handle, UART_IT_ERR);
+ if(__HAL_UART_GET_FLAG(&Uart2Handle, UART_FLAG_FE) != RESET)// frame error
{
if(source !=RESET)
{
- __HAL_USART_CLEAR_FEFLAG(&Uart2Handle);
+ __HAL_UART_CLEAR_FEFLAG(&Uart2Handle);
}
}
- if(__HAL_USART_GET_FLAG(&Uart2Handle, USART_FLAG_NE) != RESET)// noise error
+ if(__HAL_UART_GET_FLAG(&Uart2Handle, UART_FLAG_NE) != RESET)// noise error
{
if(source !=RESET)
{
- __HAL_USART_CLEAR_NEFLAG(&Uart2Handle);
+ __HAL_UART_CLEAR_NEFLAG(&Uart2Handle);
}
}
- if(__HAL_USART_GET_FLAG(&Uart2Handle, USART_FLAG_ORE) != RESET)// overrun error
+ if(__HAL_UART_GET_FLAG(&Uart2Handle, UART_FLAG_ORE) != RESET)// overrun error
{
if(source !=RESET)
{
- __HAL_USART_CLEAR_OREFLAG(&Uart2Handle);
+ __HAL_UART_CLEAR_OREFLAG(&Uart2Handle);
}
}
}
-void USART_DMA_TX_IRQHandler(void)
+void UART_DMA_TX_IRQHandler(void)
{
if(__HAL_DMA_GET_FLAG(Uart2Handle.hdmatx,__HAL_DMA_GET_TE_FLAG_INDEX(Uart2Handle.hdmatx)) != RESET)
{
@@ -129,7 +129,7 @@ void USART_DMA_TX_IRQHandler(void)
}
}
-void USART_DMA_RX_IRQHandler(void)
+void UART_DMA_RX_IRQHandler(void)
{
if(__HAL_DMA_GET_FLAG(Uart2Handle.hdmarx,__HAL_DMA_GET_TE_FLAG_INDEX(Uart2Handle.hdmarx)) != RESET)
{
@@ -168,36 +168,36 @@ void USART_DMA_RX_IRQHandler(void)
}
/* public functions*/
-void usart2_init(TComm *comm_dev,USART_InitTypeDef *conf,TUSART_IRQ_Priorities *priorities)
+void usart2_init(TComm *comm_dev,UART_InitTypeDef *conf,TUART_IRQ_Priorities *priorities)
{
GPIO_InitTypeDef GPIO_InitStructure;
/* Enable GPIO clock */
- USART_ENABLE_TX_GPIO_CLK;
- USART_ENABLE_RX_GPIO_CLK;
- USART_ENABLE_DMA_CLK;
+ UART_ENABLE_TX_GPIO_CLK;
+ UART_ENABLE_RX_GPIO_CLK;
+ UART_ENABLE_DMA_CLK;
// configure the GPIO pins
- /* Configure USART Tx and Rx as alternate function push-pull */
- GPIO_InitStructure.Pin = USART_TX_PIN;
+ /* Configure UART Tx and Rx as alternate function push-pull */
+ GPIO_InitStructure.Pin = UART_TX_PIN;
GPIO_InitStructure.Mode = GPIO_MODE_AF_PP;
GPIO_InitStructure.Pull = GPIO_PULLUP;
GPIO_InitStructure.Speed = GPIO_SPEED_HIGH;
- HAL_GPIO_Init(USART_TX_GPIO_PORT, &GPIO_InitStructure);
+ HAL_GPIO_Init(UART_TX_GPIO_PORT, &GPIO_InitStructure);
- GPIO_InitStructure.Pin = USART_RX_PIN;
+ GPIO_InitStructure.Pin = UART_RX_PIN;
GPIO_InitStructure.Mode = GPIO_MODE_INPUT;
- HAL_GPIO_Init(USART_RX_GPIO_PORT, &GPIO_InitStructure);
+ HAL_GPIO_Init(UART_RX_GPIO_PORT, &GPIO_InitStructure);
- USART_ENABLE_CLK;
+ UART_ENABLE_CLK;
- Uart2Handle.Instance = USART;
+ Uart2Handle.Instance = UART;
usart2_config(comm_dev,conf);
if(comm_dev->use_dma)
{
// configure the DMA channels
- usart2_hdma_tx.Instance = USART_TX_DMA_CHANNEL;
+ usart2_hdma_tx.Instance = UART_TX_DMA_CHANNEL;
usart2_hdma_tx.Init.Direction = DMA_MEMORY_TO_PERIPH;
usart2_hdma_tx.Init.PeriphInc = DMA_PINC_DISABLE;
usart2_hdma_tx.Init.MemInc = DMA_MINC_ENABLE;
@@ -208,11 +208,11 @@ void usart2_init(TComm *comm_dev,USART_InitTypeDef *conf,TUSART_IRQ_Priorities *
HAL_DMA_Init(&usart2_hdma_tx);
- /* Associate the initialized DMA handle to the USART handle */
+ /* Associate the initialized DMA handle to the UART handle */
__HAL_LINKDMA(&Uart2Handle, hdmatx, usart2_hdma_tx);
/* Configure the DMA handler for reception process */
- usart2_hdma_rx.Instance = USART_RX_DMA_CHANNEL;
+ usart2_hdma_rx.Instance = UART_RX_DMA_CHANNEL;
usart2_hdma_rx.Init.Direction = DMA_PERIPH_TO_MEMORY;
usart2_hdma_rx.Init.PeriphInc = DMA_PINC_DISABLE;
usart2_hdma_rx.Init.MemInc = DMA_MINC_ENABLE;
@@ -223,7 +223,7 @@ void usart2_init(TComm *comm_dev,USART_InitTypeDef *conf,TUSART_IRQ_Priorities *
HAL_DMA_Init(&usart2_hdma_rx);
- /* Associate the initialized DMA handle to the the USART handle */
+ /* Associate the initialized DMA handle to the the UART handle */
__HAL_LINKDMA(&Uart2Handle, hdmarx, usart2_hdma_rx);
}
usart2_set_priorities(comm_dev,priorities);
@@ -248,43 +248,42 @@ void usart2_init(TComm *comm_dev,USART_InitTypeDef *conf,TUSART_IRQ_Priorities *
usart2_comm_dev=comm_dev;
}
-void usart2_config(TComm *comm_dev,USART_InitTypeDef *conf)
+void usart2_config(TComm *comm_dev,UART_InitTypeDef *conf)
{
Uart2Handle.Init.BaudRate = conf->BaudRate;
Uart2Handle.Init.WordLength = conf->WordLength;
Uart2Handle.Init.StopBits = conf->StopBits;
Uart2Handle.Init.Parity = conf->Parity;
Uart2Handle.Init.Mode = conf->Mode;
- Uart2Handle.Init.CLKPolarity = conf->CLKPolarity;
- Uart2Handle.Init.CLKPhase = conf->CLKPhase;
- Uart2Handle.Init.CLKLastBit = conf->CLKLastBit;
- HAL_USART_Init(&Uart2Handle);
+ Uart2Handle.Init.HwFlowCtl = conf->HwFlowCtl;
+ Uart2Handle.Init.OverSampling = conf->OverSampling;
+ HAL_UART_Init(&Uart2Handle);
}
-void usart2_set_priorities(TComm *comm_dev,TUSART_IRQ_Priorities *priorities)
+void usart2_set_priorities(TComm *comm_dev,TUART_IRQ_Priorities *priorities)
{
- HAL_NVIC_SetPriority(USART_IRQn, priorities->irq_priority,priorities->irq_subpriority);
- HAL_NVIC_EnableIRQ(USART_IRQn);
+ HAL_NVIC_SetPriority(UART_IRQn, priorities->irq_priority,priorities->irq_subpriority);
+ HAL_NVIC_EnableIRQ(UART_IRQn);
if(comm_dev->use_dma)
{
- HAL_NVIC_SetPriority(USART_DMA_TX_IRQn, priorities->dma_tx_priority,priorities->dma_tx_subpriority);
- HAL_NVIC_EnableIRQ(USART_DMA_TX_IRQn);
- HAL_NVIC_SetPriority(USART_DMA_RX_IRQn, priorities->dma_rx_priority,priorities->dma_rx_subpriority);
- HAL_NVIC_EnableIRQ(USART_DMA_RX_IRQn);
+ HAL_NVIC_SetPriority(UART_DMA_TX_IRQn, priorities->dma_tx_priority,priorities->dma_tx_subpriority);
+ HAL_NVIC_EnableIRQ(UART_DMA_TX_IRQn);
+ HAL_NVIC_SetPriority(UART_DMA_RX_IRQn, priorities->dma_rx_priority,priorities->dma_rx_subpriority);
+ HAL_NVIC_EnableIRQ(UART_DMA_RX_IRQn);
}
}
void usart2_set_baudrate(TComm *comm_dev,unsigned int baudrate)
{
Uart2Handle.Init.BaudRate = baudrate;
- HAL_USART_Init(&Uart2Handle);
+ HAL_UART_Init(&Uart2Handle);
}
/* IRQ functions */
unsigned char usart2_send_irq(unsigned char first_byte)
{
- __HAL_USART_CLEAR_FLAG(&Uart2Handle,USART_FLAG_TC);
- __HAL_USART_ENABLE_IT(&Uart2Handle, USART_IT_TC);
+ __HAL_UART_CLEAR_FLAG(&Uart2Handle,UART_FLAG_TC);
+ __HAL_UART_ENABLE_IT(&Uart2Handle, UART_IT_TC);
Uart2Handle.Instance->DR=first_byte;
return 0x00;
@@ -292,8 +291,8 @@ unsigned char usart2_send_irq(unsigned char first_byte)
unsigned char usart2_enable_tx_irq(void)
{
- __HAL_USART_CLEAR_FLAG(&Uart2Handle,USART_FLAG_TC);
- __HAL_USART_ENABLE_IT(&Uart2Handle, USART_IT_TC);
+ __HAL_UART_CLEAR_FLAG(&Uart2Handle,UART_FLAG_TC);
+ __HAL_UART_ENABLE_IT(&Uart2Handle, UART_IT_TC);
return 0x00;
}
@@ -301,7 +300,7 @@ unsigned char usart2_enable_tx_irq(void)
unsigned char usart2_receive_irq(void)
{
/* enable the rx interrupt */
- __HAL_USART_ENABLE_IT(&Uart2Handle, USART_IT_RXNE);
+ __HAL_UART_ENABLE_IT(&Uart2Handle, UART_IT_RXNE);
return 0x00;
}
@@ -309,7 +308,7 @@ unsigned char usart2_receive_irq(void)
unsigned char usart2_cancel_receive_irq(void)
{
/* disable the rx interrupt */
- __HAL_USART_DISABLE_IT(&Uart2Handle, USART_IT_RXNE);
+ __HAL_UART_DISABLE_IT(&Uart2Handle, UART_IT_RXNE);
return 0x00;
}
@@ -319,9 +318,9 @@ unsigned char usart2_send_dma(unsigned char *data,unsigned short int length)
{
HAL_DMA_Start_IT(Uart2Handle.hdmatx,(uint32_t)data,(uint32_t)&Uart2Handle.Instance->DR,length);
/* Clear the TC flag in the SR register by writing 0 to it */
- __HAL_USART_CLEAR_FLAG(&Uart2Handle,USART_FLAG_TC);
+ __HAL_UART_CLEAR_FLAG(&Uart2Handle,UART_FLAG_TC);
/* Enable the DMA transfer for transmit request by setting the DMAT bit
- in the USART CR3 register */
+ in the UART CR3 register */
SET_BIT(Uart2Handle.Instance->CR3, USART_CR3_DMAT);
return 0x00;
diff --git a/f1/usart/src/usart3.c b/f1/usart/src/usart3.c
index 51ca7a1ccb45bc59b2913b31889c82ba6ba7f47f..d5db37c567557dd668a7f5f6bc72921a9cf9843d 100644
--- a/f1/usart/src/usart3.c
+++ b/f1/usart/src/usart3.c
@@ -1,97 +1,97 @@
#include "usart3.h"
-#define USART USART3
-#define USART_ENABLE_CLK __HAL_RCC_USART3_CLK_ENABLE()
-#define USART_IRQn USART3_IRQn
-#define USART_IRQHandler USART3_IRQHandler
+#define UART USART3
+#define UART_ENABLE_CLK __HAL_RCC_USART3_CLK_ENABLE()
+#define UART_IRQn USART3_IRQn
+#define UART_IRQHandler USART3_IRQHandler
-#define USART_TX_PIN GPIO_PIN_10
-#define USART_TX_GPIO_PORT GPIOB
-#define USART_ENABLE_TX_GPIO_CLK __HAL_RCC_GPIOB_CLK_ENABLE()
+#define UART_TX_PIN GPIO_PIN_10
+#define UART_TX_GPIO_PORT GPIOB
+#define UART_ENABLE_TX_GPIO_CLK __HAL_RCC_GPIOB_CLK_ENABLE()
-#define USART_RX_PIN GPIO_PIN_11
-#define USART_RX_GPIO_PORT GPIOB
-#define USART_ENABLE_RX_GPIO_CLK __HAL_RCC_GPIOB_CLK_ENABLE()
+#define UART_RX_PIN GPIO_PIN_11
+#define UART_RX_GPIO_PORT GPIOB
+#define UART_ENABLE_RX_GPIO_CLK __HAL_RCC_GPIOB_CLK_ENABLE()
/* DMA configuration */
-#define USART_DMA DMA1
-#define USART_ENABLE_DMA_CLK __HAL_RCC_DMA1_CLK_ENABLE()
+#define UART_DMA DMA1
+#define UART_ENABLE_DMA_CLK __HAL_RCC_DMA1_CLK_ENABLE()
-#define USART_TX_DMA_CHANNEL DMA1_Channel2
-#define USART_RX_DMA_CHANNEL DMA1_Channel3
+#define UART_TX_DMA_CHANNEL DMA1_Channel2
+#define UART_RX_DMA_CHANNEL DMA1_Channel3
-#define USART_DMA_TX_IRQn DMA1_Channel2_IRQn
-#define USART_DMA_RX_IRQn DMA1_Channel3_IRQn
-#define USART_DMA_TX_IRQHandler DMA1_Channel2_IRQHandler
-#define USART_DMA_RX_IRQHandler DMA1_Channel3_IRQHandler
+#define UART_DMA_TX_IRQn DMA1_Channel2_IRQn
+#define UART_DMA_RX_IRQn DMA1_Channel3_IRQn
+#define UART_DMA_TX_IRQHandler DMA1_Channel2_IRQHandler
+#define UART_DMA_RX_IRQHandler DMA1_Channel3_IRQHandler
// private variables
-USART_HandleTypeDef Uart3Handle;
+UART_HandleTypeDef Uart3Handle;
DMA_HandleTypeDef usart3_hdma_tx;
DMA_HandleTypeDef usart3_hdma_rx;
TComm *usart3_comm_dev;
// interrupt handlers
-void USART_IRQHandler(void)
+void UART_IRQHandler(void)
{
unsigned char data,ret;
uint32_t source;
- if(__HAL_USART_GET_FLAG(&Uart3Handle, USART_FLAG_RXNE) != RESET)
+ if(__HAL_UART_GET_FLAG(&Uart3Handle, UART_FLAG_RXNE) != RESET)
{
- if(__HAL_USART_GET_IT_SOURCE(&Uart3Handle, USART_IT_RXNE) !=RESET)
+ if(__HAL_UART_GET_IT_SOURCE(&Uart3Handle, UART_IT_RXNE) !=RESET)
{
- __HAL_USART_CLEAR_FLAG(&Uart3Handle,USART_FLAG_RXNE);
+ __HAL_UART_CLEAR_FLAG(&Uart3Handle,UART_FLAG_RXNE);
data=(uint8_t)(Uart3Handle.Instance->DR & (uint8_t)0x00FF);
// call the reception function
if(!comm_do_irq_receive(usart3_comm_dev,data))
- __HAL_USART_DISABLE_IT(&Uart3Handle, USART_IT_RXNE);
+ __HAL_UART_DISABLE_IT(&Uart3Handle, UART_IT_RXNE);
}
}
- if(__HAL_USART_GET_FLAG(&Uart3Handle, USART_FLAG_TC) != RESET)
+ if(__HAL_UART_GET_FLAG(&Uart3Handle, UART_FLAG_TC) != RESET)
{
- if(__HAL_USART_GET_IT_SOURCE(&Uart3Handle, USART_IT_TC) !=RESET)
+ if(__HAL_UART_GET_IT_SOURCE(&Uart3Handle, UART_IT_TC) !=RESET)
{
- __HAL_USART_CLEAR_FLAG(&Uart3Handle,USART_FLAG_TC);
+ __HAL_UART_CLEAR_FLAG(&Uart3Handle,UART_FLAG_TC);
ret=comm_do_irq_send(usart3_comm_dev,&data);
if(ret==0x01)
Uart3Handle.Instance->DR=data;
else if(ret==0x00)
- __HAL_USART_DISABLE_IT(&Uart3Handle, USART_IT_TC);
+ __HAL_UART_DISABLE_IT(&Uart3Handle, UART_IT_TC);
}
}
- if(__HAL_USART_GET_FLAG(&Uart3Handle, USART_FLAG_PE) != RESET)// parity error
+ if(__HAL_UART_GET_FLAG(&Uart3Handle, UART_FLAG_PE) != RESET)// parity error
{
- if(__HAL_USART_GET_IT_SOURCE(&Uart3Handle, USART_IT_PE) !=RESET)
+ if(__HAL_UART_GET_IT_SOURCE(&Uart3Handle, UART_IT_PE) !=RESET)
{
- __HAL_USART_CLEAR_PEFLAG(&Uart3Handle);
+ __HAL_UART_CLEAR_PEFLAG(&Uart3Handle);
}
}
- source=__HAL_USART_GET_IT_SOURCE(&Uart3Handle, USART_IT_ERR);
- if(__HAL_USART_GET_FLAG(&Uart3Handle, USART_FLAG_FE) != RESET)// frame error
+ source=__HAL_UART_GET_IT_SOURCE(&Uart3Handle, UART_IT_ERR);
+ if(__HAL_UART_GET_FLAG(&Uart3Handle, UART_FLAG_FE) != RESET)// frame error
{
if(source !=RESET)
{
- __HAL_USART_CLEAR_FEFLAG(&Uart3Handle);
+ __HAL_UART_CLEAR_FEFLAG(&Uart3Handle);
}
}
- if(__HAL_USART_GET_FLAG(&Uart3Handle, USART_FLAG_NE) != RESET)// noise error
+ if(__HAL_UART_GET_FLAG(&Uart3Handle, UART_FLAG_NE) != RESET)// noise error
{
if(source !=RESET)
{
- __HAL_USART_CLEAR_NEFLAG(&Uart3Handle);
+ __HAL_UART_CLEAR_NEFLAG(&Uart3Handle);
}
}
- if(__HAL_USART_GET_FLAG(&Uart3Handle, USART_FLAG_ORE) != RESET)// overrun error
+ if(__HAL_UART_GET_FLAG(&Uart3Handle, UART_FLAG_ORE) != RESET)// overrun error
{
if(source !=RESET)
{
- __HAL_USART_CLEAR_OREFLAG(&Uart3Handle);
+ __HAL_UART_CLEAR_OREFLAG(&Uart3Handle);
}
}
}
-void USART_DMA_TX_IRQHandler(void)
+void UART_DMA_TX_IRQHandler(void)
{
if(__HAL_DMA_GET_FLAG(Uart3Handle.hdmatx,__HAL_DMA_GET_TE_FLAG_INDEX(Uart3Handle.hdmatx)) != RESET)
{
@@ -129,7 +129,7 @@ void USART_DMA_TX_IRQHandler(void)
}
}
-void USART_DMA_RX_IRQHandler(void)
+void UART_DMA_RX_IRQHandler(void)
{
if(__HAL_DMA_GET_FLAG(Uart3Handle.hdmarx,__HAL_DMA_GET_TE_FLAG_INDEX(Uart3Handle.hdmarx)) != RESET)
{
@@ -168,36 +168,36 @@ void USART_DMA_RX_IRQHandler(void)
}
/* public functions*/
-void usart3_init(TComm *comm_dev,USART_InitTypeDef *conf,TUSART_IRQ_Priorities *priorities)
+void usart3_init(TComm *comm_dev,UART_InitTypeDef *conf,TUART_IRQ_Priorities *priorities)
{
GPIO_InitTypeDef GPIO_InitStructure;
/* Enable GPIO clock */
- USART_ENABLE_TX_GPIO_CLK;
- USART_ENABLE_RX_GPIO_CLK;
- USART_ENABLE_DMA_CLK;
+ UART_ENABLE_TX_GPIO_CLK;
+ UART_ENABLE_RX_GPIO_CLK;
+ UART_ENABLE_DMA_CLK;
// configure the GPIO pins
- /* Configure USART Tx and Rx as alternate function push-pull */
- GPIO_InitStructure.Pin = USART_TX_PIN;
+ /* Configure UART Tx and Rx as alternate function push-pull */
+ GPIO_InitStructure.Pin = UART_TX_PIN;
GPIO_InitStructure.Mode = GPIO_MODE_AF_PP;
GPIO_InitStructure.Pull = GPIO_PULLUP;
GPIO_InitStructure.Speed = GPIO_SPEED_HIGH;
- HAL_GPIO_Init(USART_TX_GPIO_PORT, &GPIO_InitStructure);
+ HAL_GPIO_Init(UART_TX_GPIO_PORT, &GPIO_InitStructure);
- GPIO_InitStructure.Pin = USART_RX_PIN;
+ GPIO_InitStructure.Pin = UART_RX_PIN;
GPIO_InitStructure.Mode = GPIO_MODE_INPUT;
- HAL_GPIO_Init(USART_RX_GPIO_PORT, &GPIO_InitStructure);
+ HAL_GPIO_Init(UART_RX_GPIO_PORT, &GPIO_InitStructure);
- USART_ENABLE_CLK;
+ UART_ENABLE_CLK;
- Uart3Handle.Instance = USART3;
+ Uart3Handle.Instance = UART3;
usart3_config(comm_dev,conf);
if(comm_dev->use_dma)
{
// configure the DMA channels
- usart3_hdma_tx.Instance = USART_TX_DMA_CHANNEL;
+ usart3_hdma_tx.Instance = UART_TX_DMA_CHANNEL;
usart3_hdma_tx.Init.Direction = DMA_MEMORY_TO_PERIPH;
usart3_hdma_tx.Init.PeriphInc = DMA_PINC_DISABLE;
usart3_hdma_tx.Init.MemInc = DMA_MINC_ENABLE;
@@ -208,11 +208,11 @@ void usart3_init(TComm *comm_dev,USART_InitTypeDef *conf,TUSART_IRQ_Priorities *
HAL_DMA_Init(&usart3_hdma_tx);
- /* Associate the initialized DMA handle to the USART handle */
+ /* Associate the initialized DMA handle to the UART handle */
__HAL_LINKDMA(&Uart3Handle, hdmatx, usart3_hdma_tx);
/* Configure the DMA handler for reception process */
- usart3_hdma_rx.Instance = USART_RX_DMA_CHANNEL;
+ usart3_hdma_rx.Instance = UART_RX_DMA_CHANNEL;
usart3_hdma_rx.Init.Direction = DMA_PERIPH_TO_MEMORY;
usart3_hdma_rx.Init.PeriphInc = DMA_PINC_DISABLE;
usart3_hdma_rx.Init.MemInc = DMA_MINC_ENABLE;
@@ -223,7 +223,7 @@ void usart3_init(TComm *comm_dev,USART_InitTypeDef *conf,TUSART_IRQ_Priorities *
HAL_DMA_Init(&usart3_hdma_rx);
- /* Associate the initialized DMA handle to the the USART handle */
+ /* Associate the initialized DMA handle to the the UART handle */
__HAL_LINKDMA(&Uart3Handle, hdmarx, usart3_hdma_rx);
}
usart3_set_priorities(comm_dev,priorities);
@@ -248,43 +248,42 @@ void usart3_init(TComm *comm_dev,USART_InitTypeDef *conf,TUSART_IRQ_Priorities *
usart3_comm_dev=comm_dev;
}
-void usart3_config(TComm *comm_dev,USART_InitTypeDef *conf)
+void usart3_config(TComm *comm_dev,UART_InitTypeDef *conf)
{
Uart3Handle.Init.BaudRate = conf->BaudRate;
Uart3Handle.Init.WordLength = conf->WordLength;
Uart3Handle.Init.StopBits = conf->StopBits;
Uart3Handle.Init.Parity = conf->Parity;
Uart3Handle.Init.Mode = conf->Mode;
- Uart3Handle.Init.CLKPolarity = conf->CLKPolarity;
- Uart3Handle.Init.CLKPhase = conf->CLKPhase;
- Uart3Handle.Init.CLKLastBit = conf->CLKLastBit;
- HAL_USART_Init(&Uart3Handle);
+ Uart3Handle.Init.HwFlowCtrl = conf->HwFlowCtl;
+ Uart3Handle.Init.OverSampling = conf->OverSampling;
+ HAL_UART_Init(&Uart3Handle);
}
-void usart3_set_priorities(TComm *comm_dev,TUSART_IRQ_Priorities *priorities)
+void usart3_set_priorities(TComm *comm_dev,TUART_IRQ_Priorities *priorities)
{
- HAL_NVIC_SetPriority(USART_IRQn, priorities->irq_priority,priorities->irq_subpriority);
- HAL_NVIC_EnableIRQ(USART_IRQn);
+ HAL_NVIC_SetPriority(UART_IRQn, priorities->irq_priority,priorities->irq_subpriority);
+ HAL_NVIC_EnableIRQ(UART_IRQn);
if(comm_dev->use_dma)
{
- HAL_NVIC_SetPriority(USART_DMA_TX_IRQn, priorities->dma_tx_priority,priorities->dma_tx_subpriority);
- HAL_NVIC_EnableIRQ(USART_DMA_TX_IRQn);
- HAL_NVIC_SetPriority(USART_DMA_RX_IRQn, priorities->dma_rx_priority,priorities->dma_rx_subpriority);
- HAL_NVIC_EnableIRQ(USART_DMA_RX_IRQn);
+ HAL_NVIC_SetPriority(UART_DMA_TX_IRQn, priorities->dma_tx_priority,priorities->dma_tx_subpriority);
+ HAL_NVIC_EnableIRQ(UART_DMA_TX_IRQn);
+ HAL_NVIC_SetPriority(UART_DMA_RX_IRQn, priorities->dma_rx_priority,priorities->dma_rx_subpriority);
+ HAL_NVIC_EnableIRQ(UART_DMA_RX_IRQn);
}
}
void usart3_set_baudrate(TComm *comm_dev,unsigned int baudrate)
{
Uart3Handle.Init.BaudRate = baudrate;
- HAL_USART_Init(&Uart3Handle);
+ HAL_UART_Init(&Uart3Handle);
}
/* IRQ functions */
unsigned char usart3_send_irq(unsigned char first_byte)
{
- __HAL_USART_CLEAR_FLAG(&Uart3Handle,USART_FLAG_TC);
- __HAL_USART_ENABLE_IT(&Uart3Handle, USART_IT_TC);
+ __HAL_UART_CLEAR_FLAG(&Uart3Handle,UART_FLAG_TC);
+ __HAL_UART_ENABLE_IT(&Uart3Handle, UART_IT_TC);
Uart3Handle.Instance->DR=first_byte;
return 0x00;
@@ -292,8 +291,8 @@ unsigned char usart3_send_irq(unsigned char first_byte)
unsigned char usart3_enable_tx_irq(void)
{
- __HAL_USART_CLEAR_FLAG(&Uart3Handle,USART_FLAG_TC);
- __HAL_USART_ENABLE_IT(&Uart3Handle, USART_IT_TC);
+ __HAL_UART_CLEAR_FLAG(&Uart3Handle,UART_FLAG_TC);
+ __HAL_UART_ENABLE_IT(&Uart3Handle, UART_IT_TC);
return 0x00;
}
@@ -301,7 +300,7 @@ unsigned char usart3_enable_tx_irq(void)
unsigned char usart3_receive_irq(void)
{
/* enable the rx interrupt */
- __HAL_USART_ENABLE_IT(&Uart3Handle, USART_IT_RXNE);
+ __HAL_UART_ENABLE_IT(&Uart3Handle, UART_IT_RXNE);
return 0x00;
}
@@ -309,7 +308,7 @@ unsigned char usart3_receive_irq(void)
unsigned char usart3_cancel_receive_irq(void)
{
/* disable the rx interrupt */
- __HAL_USART_DISABLE_IT(&Uart3Handle, USART_IT_RXNE);
+ __HAL_UART_DISABLE_IT(&Uart3Handle, UART_IT_RXNE);
return 0x00;
}
@@ -319,9 +318,9 @@ unsigned char usart3_send_dma(unsigned char *data,unsigned short int length)
{
HAL_DMA_Start_IT(Uart3Handle.hdmatx,(uint32_t)data,(uint32_t)&Uart3Handle.Instance->DR,length);
/* Clear the TC flag in the SR register by writing 0 to it */
- __HAL_USART_CLEAR_FLAG(&Uart3Handle,USART_FLAG_TC);
+ __HAL_UART_CLEAR_FLAG(&Uart3Handle,UART_FLAG_TC);
/* Enable the DMA transfer for transmit request by setting the DMAT bit
- in the USART CR3 register */
+ in the UART CR3 register */
SET_BIT(Uart3Handle.Instance->CR3, USART_CR3_DMAT);
return 0x00;