diff --git a/f0/include/core/core_cm0.h b/f0/include/core/core_cm0.h
new file mode 100755
index 0000000000000000000000000000000000000000..dbc4e22d405fbf975bfe5e8426cd9d0591013637
--- /dev/null
+++ b/f0/include/core/core_cm0.h
@@ -0,0 +1,711 @@
+/**************************************************************************//**
+ * @file core_cm0.h
+ * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File
+ * @version V4.00
+ * @date 22. August 2014
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2014 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifndef __CORE_CM0_H_GENERIC
+#define __CORE_CM0_H_GENERIC
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M0
+ @{
+ */
+
+/* CMSIS CM0 definitions */
+#define __CM0_CMSIS_VERSION_MAIN (0x04) /*!< [31:16] CMSIS HAL main version */
+#define __CM0_CMSIS_VERSION_SUB (0x00) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16) | \
+ __CM0_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x00) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __CSMC__ )
+ #define __packed
+ #define __ASM _asm /*!< asm keyword for COSMIC Compiler */
+ #define __INLINE inline /*use -pc99 on compile line !< inline keyword for COSMIC Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not.
+ This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI__VFP_SUPPORT____
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __CSMC__ ) /* Cosmic */
+ #if ( __CSMC__ & 0x400) // FPU present for parser
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM0_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0_H_DEPENDANT
+#define __CORE_CM0_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0_REV
+ #define __CM0_REV 0x0000
+ #warning "__CM0_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M0 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[1]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31];
+ __IO uint32_t ICER[1]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31];
+ __IO uint32_t ISPR[1]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31];
+ __IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31];
+ uint32_t RESERVED4[64];
+ __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ uint32_t RESERVED0;
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED1;
+ __IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_CALIB_TENMS_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR)
+ are only accessible over DAP and not via processor. Therefore
+ they are not covered by the Cortex-M0 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M0 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( (((uint32_t)(IRQn) ) & 0x03) * 8 )
+#define _SHP_IDX(IRQn) ( ((((uint32_t)(IRQn) & 0x0F)-8) >> 2) )
+#define _IP_IDX(IRQn) ( ((uint32_t)(IRQn) >> 2) )
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[0] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0));
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+ else {
+ NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M0 system interrupts */
+ else {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM0_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff --git a/f0/include/core/core_cmFunc.h b/f0/include/core/core_cmFunc.h
new file mode 100755
index 0000000000000000000000000000000000000000..a1bd88c2cac20388cadbc320cdcdbc32a93d445c
--- /dev/null
+++ b/f0/include/core/core_cmFunc.h
@@ -0,0 +1,637 @@
+/**************************************************************************//**
+ * @file core_cmFunc.h
+ * @brief CMSIS Cortex-M Core Function Access Header File
+ * @version V4.00
+ * @date 28. August 2014
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2014 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CMFUNC_H
+#define __CORE_CMFUNC_H
+
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+ */
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+/* intrinsic void __enable_irq(); */
+/* intrinsic void __disable_irq(); */
+
+/** \brief Get Control Register
+
+ This function returns the content of the Control Register.
+
+ \return Control Register value
+ */
+__STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ register uint32_t __regControl __ASM("control");
+ return(__regControl);
+}
+
+
+/** \brief Set Control Register
+
+ This function writes the given value to the Control Register.
+
+ \param [in] control Control Register value to set
+ */
+__STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ register uint32_t __regControl __ASM("control");
+ __regControl = control;
+}
+
+
+/** \brief Get IPSR Register
+
+ This function returns the content of the IPSR Register.
+
+ \return IPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ register uint32_t __regIPSR __ASM("ipsr");
+ return(__regIPSR);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__STATIC_INLINE uint32_t __get_APSR(void)
+{
+ register uint32_t __regAPSR __ASM("apsr");
+ return(__regAPSR);
+}
+
+
+/** \brief Get xPSR Register
+
+ This function returns the content of the xPSR Register.
+
+ \return xPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ register uint32_t __regXPSR __ASM("xpsr");
+ return(__regXPSR);
+}
+
+
+/** \brief Get Process Stack Pointer
+
+ This function returns the current value of the Process Stack Pointer (PSP).
+
+ \return PSP Register value
+ */
+__STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ return(__regProcessStackPointer);
+}
+
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the Process Stack Pointer (PSP).
+
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ __regProcessStackPointer = topOfProcStack;
+}
+
+
+/** \brief Get Main Stack Pointer
+
+ This function returns the current value of the Main Stack Pointer (MSP).
+
+ \return MSP Register value
+ */
+__STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ return(__regMainStackPointer);
+}
+
+
+/** \brief Set Main Stack Pointer
+
+ This function assigns the given value to the Main Stack Pointer (MSP).
+
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ __regMainStackPointer = topOfMainStack;
+}
+
+
+/** \brief Get Priority Mask
+
+ This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+ \return Priority Mask value
+ */
+__STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ return(__regPriMask);
+}
+
+
+/** \brief Set Priority Mask
+
+ This function assigns the given value to the Priority Mask Register.
+
+ \param [in] priMask Priority Mask
+ */
+__STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ __regPriMask = (priMask);
+}
+
+
+#if (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300)
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq __enable_fiq
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq __disable_fiq
+
+
+/** \brief Get Base Priority
+
+ This function returns the current value of the Base Priority register.
+
+ \return Base Priority register value
+ */
+__STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ return(__regBasePri);
+}
+
+
+/** \brief Set Base Priority
+
+ This function assigns the given value to the Base Priority register.
+
+ \param [in] basePri Base Priority value to set
+ */
+__STATIC_INLINE void __set_BASEPRI(uint32_t basePri)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ __regBasePri = (basePri & 0xff);
+}
+
+
+/** \brief Get Fault Mask
+
+ This function returns the current value of the Fault Mask register.
+
+ \return Fault Mask register value
+ */
+__STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ return(__regFaultMask);
+}
+
+
+/** \brief Set Fault Mask
+
+ This function assigns the given value to the Fault Mask register.
+
+ \param [in] faultMask Fault Mask value to set
+ */
+__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ __regFaultMask = (faultMask & (uint32_t)1);
+}
+
+#endif /* (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300) */
+
+
+#if (__CORTEX_M == 0x04) || (__CORTEX_M == 0x07)
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ return(__regfpscr);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ __regfpscr = (fpscr);
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) || (__CORTEX_M == 0x07) */
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/** \brief Enable IRQ Interrupts
+
+ This function enables IRQ interrupts by clearing the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_irq(void)
+{
+ __ASM volatile ("cpsie i" : : : "memory");
+}
+
+
+/** \brief Disable IRQ Interrupts
+
+ This function disables IRQ interrupts by setting the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_irq(void)
+{
+ __ASM volatile ("cpsid i" : : : "memory");
+}
+
+
+/** \brief Get Control Register
+
+ This function returns the content of the Control Register.
+
+ \return Control Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, control" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Control Register
+
+ This function writes the given value to the Control Register.
+
+ \param [in] control Control Register value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ __ASM volatile ("MSR control, %0" : : "r" (control) : "memory");
+}
+
+
+/** \brief Get IPSR Register
+
+ This function returns the content of the IPSR Register.
+
+ \return IPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, ipsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_APSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, apsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get xPSR Register
+
+ This function returns the content of the xPSR Register.
+
+ \return xPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, xpsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get Process Stack Pointer
+
+ This function returns the current value of the Process Stack Pointer (PSP).
+
+ \return PSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, psp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the Process Stack Pointer (PSP).
+
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ __ASM volatile ("MSR psp, %0\n" : : "r" (topOfProcStack) : "sp");
+}
+
+
+/** \brief Get Main Stack Pointer
+
+ This function returns the current value of the Main Stack Pointer (MSP).
+
+ \return MSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, msp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Main Stack Pointer
+
+ This function assigns the given value to the Main Stack Pointer (MSP).
+
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ __ASM volatile ("MSR msp, %0\n" : : "r" (topOfMainStack) : "sp");
+}
+
+
+/** \brief Get Priority Mask
+
+ This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+ \return Priority Mask value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, primask" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Priority Mask
+
+ This function assigns the given value to the Priority Mask Register.
+
+ \param [in] priMask Priority Mask
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory");
+}
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_fault_irq(void)
+{
+ __ASM volatile ("cpsie f" : : : "memory");
+}
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_fault_irq(void)
+{
+ __ASM volatile ("cpsid f" : : : "memory");
+}
+
+
+/** \brief Get Base Priority
+
+ This function returns the current value of the Base Priority register.
+
+ \return Base Priority register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, basepri_max" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Base Priority
+
+ This function assigns the given value to the Base Priority register.
+
+ \param [in] basePri Base Priority value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_BASEPRI(uint32_t value)
+{
+ __ASM volatile ("MSR basepri, %0" : : "r" (value) : "memory");
+}
+
+
+/** \brief Get Fault Mask
+
+ This function returns the current value of the Fault Mask register.
+
+ \return Fault Mask register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, faultmask" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Fault Mask
+
+ This function assigns the given value to the Fault Mask register.
+
+ \param [in] faultMask Fault Mask value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory");
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+#if (__CORTEX_M == 0x04) || (__CORTEX_M == 0x07)
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ uint32_t result;
+
+ /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("");
+ __ASM volatile ("VMRS %0, fpscr" : "=r" (result) );
+ __ASM volatile ("");
+ return(result);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("");
+ __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc");
+ __ASM volatile ("");
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) || (__CORTEX_M == 0x07) */
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+#include <cmsis_iar.h>
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+#include <cmsis_ccs.h>
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all intrinsics,
+ * Including the CMSIS ones.
+ */
+
+
+#elif defined ( __CSMC__ ) /*------------------ COSMIC Compiler -------------------*/
+/* Cosmic specific functions */
+#include <cmsis_csm.h>
+
+#endif
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+#endif /* __CORE_CMFUNC_H */
diff --git a/f0/include/core/core_cmInstr.h b/f0/include/core/core_cmInstr.h
new file mode 100755
index 0000000000000000000000000000000000000000..cabf4a02d7bdaae6a30342f582156907e7026dc4
--- /dev/null
+++ b/f0/include/core/core_cmInstr.h
@@ -0,0 +1,880 @@
+/**************************************************************************//**
+ * @file core_cmInstr.h
+ * @brief CMSIS Cortex-M Core Instruction Access Header File
+ * @version V4.00
+ * @date 28. August 2014
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2014 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CMINSTR_H
+#define __CORE_CMINSTR_H
+
+
+/* ########################## Core Instruction Access ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+ Access to dedicated instructions
+ @{
+*/
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+
+/** \brief No Operation
+
+ No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+#define __NOP __nop
+
+
+/** \brief Wait For Interrupt
+
+ Wait For Interrupt is a hint instruction that suspends execution
+ until one of a number of events occurs.
+ */
+#define __WFI __wfi
+
+
+/** \brief Wait For Event
+
+ Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+#define __WFE __wfe
+
+
+/** \brief Send Event
+
+ Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+#define __SEV __sev
+
+
+/** \brief Instruction Synchronization Barrier
+
+ Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or
+ memory, after the instruction has been completed.
+ */
+#define __ISB() __isb(0xF)
+
+
+/** \brief Data Synchronization Barrier
+
+ This function acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+#define __DSB() __dsb(0xF)
+
+
+/** \brief Data Memory Barrier
+
+ This function ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+#define __DMB() __dmb(0xF)
+
+
+/** \brief Reverse byte order (32 bit)
+
+ This function reverses the byte order in integer value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __REV __rev
+
+
+/** \brief Reverse byte order (16 bit)
+
+ This function reverses the byte order in two unsigned short values.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value)
+{
+ rev16 r0, r0
+ bx lr
+}
+#endif
+
+/** \brief Reverse byte order in signed short value
+
+ This function reverses the byte order in a signed short value with sign extension to integer.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(int32_t value)
+{
+ revsh r0, r0
+ bx lr
+}
+#endif
+
+
+/** \brief Rotate Right in unsigned value (32 bit)
+
+ This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+
+ \param [in] value Value to rotate
+ \param [in] value Number of Bits to rotate
+ \return Rotated value
+ */
+#define __ROR __ror
+
+
+/** \brief Breakpoint
+
+ This function causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __breakpoint(value)
+
+
+#if (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300)
+
+/** \brief Reverse bit order of value
+
+ This function reverses the bit order of the given value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __RBIT __rbit
+
+
+/** \brief LDR Exclusive (8 bit)
+
+ This function executes a exclusive LDR instruction for 8 bit value.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+#define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr))
+
+
+/** \brief LDR Exclusive (16 bit)
+
+ This function executes a exclusive LDR instruction for 16 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+#define __LDREXH(ptr) ((uint16_t) __ldrex(ptr))
+
+
+/** \brief LDR Exclusive (32 bit)
+
+ This function executes a exclusive LDR instruction for 32 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+#define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr))
+
+
+/** \brief STR Exclusive (8 bit)
+
+ This function executes a exclusive STR instruction for 8 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXB(value, ptr) __strex(value, ptr)
+
+
+/** \brief STR Exclusive (16 bit)
+
+ This function executes a exclusive STR instruction for 16 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXH(value, ptr) __strex(value, ptr)
+
+
+/** \brief STR Exclusive (32 bit)
+
+ This function executes a exclusive STR instruction for 32 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXW(value, ptr) __strex(value, ptr)
+
+
+/** \brief Remove the exclusive lock
+
+ This function removes the exclusive lock which is created by LDREX.
+
+ */
+#define __CLREX __clrex
+
+
+/** \brief Signed Saturate
+
+ This function saturates a signed value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT __ssat
+
+
+/** \brief Unsigned Saturate
+
+ This function saturates an unsigned value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT __usat
+
+
+/** \brief Count leading zeros
+
+ This function counts the number of leading zeros of a data value.
+
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+#define __CLZ __clz
+
+
+/** \brief Rotate Right with Extend (32 bit)
+
+ This function moves each bit of a bitstring right by one bit. The carry input is shifted in at the left end of the bitstring.
+
+ \param [in] value Value to rotate
+ \return Rotated value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".rrx_text"))) __STATIC_INLINE __ASM uint32_t __RRX(uint32_t value)
+{
+ rrx r0, r0
+ bx lr
+}
+#endif
+
+
+/** \brief LDRT Unprivileged (8 bit)
+
+ This function executes a Unprivileged LDRT instruction for 8 bit value.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+#define __LDRBT(ptr) ((uint8_t ) __ldrt(ptr))
+
+
+/** \brief LDRT Unprivileged (16 bit)
+
+ This function executes a Unprivileged LDRT instruction for 16 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+#define __LDRHT(ptr) ((uint16_t) __ldrt(ptr))
+
+
+/** \brief LDRT Unprivileged (32 bit)
+
+ This function executes a Unprivileged LDRT instruction for 32 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+#define __LDRT(ptr) ((uint32_t ) __ldrt(ptr))
+
+
+/** \brief STRT Unprivileged (8 bit)
+
+ This function executes a Unprivileged STRT instruction for 8 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+#define __STRBT(value, ptr) __strt(value, ptr)
+
+
+/** \brief STRT Unprivileged (16 bit)
+
+ This function executes a Unprivileged STRT instruction for 16 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+#define __STRHT(value, ptr) __strt(value, ptr)
+
+
+/** \brief STRT Unprivileged (32 bit)
+
+ This function executes a Unprivileged STRT instruction for 32 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+#define __STRT(value, ptr) __strt(value, ptr)
+
+#endif /* (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300) */
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/* Define macros for porting to both thumb1 and thumb2.
+ * For thumb1, use low register (r0-r7), specified by constrant "l"
+ * Otherwise, use general registers, specified by constrant "r" */
+#if defined (__thumb__) && !defined (__thumb2__)
+#define __CMSIS_GCC_OUT_REG(r) "=l" (r)
+#define __CMSIS_GCC_USE_REG(r) "l" (r)
+#else
+#define __CMSIS_GCC_OUT_REG(r) "=r" (r)
+#define __CMSIS_GCC_USE_REG(r) "r" (r)
+#endif
+
+/** \brief No Operation
+
+ No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __NOP(void)
+{
+ __ASM volatile ("nop");
+}
+
+
+/** \brief Wait For Interrupt
+
+ Wait For Interrupt is a hint instruction that suspends execution
+ until one of a number of events occurs.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFI(void)
+{
+ __ASM volatile ("wfi");
+}
+
+
+/** \brief Wait For Event
+
+ Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFE(void)
+{
+ __ASM volatile ("wfe");
+}
+
+
+/** \brief Send Event
+
+ Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __SEV(void)
+{
+ __ASM volatile ("sev");
+}
+
+
+/** \brief Instruction Synchronization Barrier
+
+ Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or
+ memory, after the instruction has been completed.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __ISB(void)
+{
+ __ASM volatile ("isb");
+}
+
+
+/** \brief Data Synchronization Barrier
+
+ This function acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __DSB(void)
+{
+ __ASM volatile ("dsb");
+}
+
+
+/** \brief Data Memory Barrier
+
+ This function ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __DMB(void)
+{
+ __ASM volatile ("dmb");
+}
+
+
+/** \brief Reverse byte order (32 bit)
+
+ This function reverses the byte order in integer value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV(uint32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)
+ return __builtin_bswap32(value);
+#else
+ uint32_t result;
+
+ __ASM volatile ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+#endif
+}
+
+
+/** \brief Reverse byte order (16 bit)
+
+ This function reverses the byte order in two unsigned short values.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV16(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+}
+
+
+/** \brief Reverse byte order in signed short value
+
+ This function reverses the byte order in a signed short value with sign extension to integer.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE int32_t __REVSH(int32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ return (short)__builtin_bswap16(value);
+#else
+ uint32_t result;
+
+ __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+#endif
+}
+
+
+/** \brief Rotate Right in unsigned value (32 bit)
+
+ This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+
+ \param [in] value Value to rotate
+ \param [in] value Number of Bits to rotate
+ \return Rotated value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __ROR(uint32_t op1, uint32_t op2)
+{
+ return (op1 >> op2) | (op1 << (32 - op2));
+}
+
+
+/** \brief Breakpoint
+
+ This function causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __ASM volatile ("bkpt "#value)
+
+
+#if (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300)
+
+/** \brief Reverse bit order of value
+
+ This function reverses the bit order of the given value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (8 bit)
+
+ This function executes a exclusive LDR instruction for 8 bit value.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __LDREXB(volatile uint8_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return ((uint8_t) result); /* Add explicit type cast here */
+}
+
+
+/** \brief LDR Exclusive (16 bit)
+
+ This function executes a exclusive LDR instruction for 16 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint16_t __LDREXH(volatile uint16_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return ((uint16_t) result); /* Add explicit type cast here */
+}
+
+
+/** \brief LDR Exclusive (32 bit)
+
+ This function executes a exclusive LDR instruction for 32 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __LDREXW(volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (8 bit)
+
+ This function executes a exclusive STR instruction for 8 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (16 bit)
+
+ This function executes a exclusive STR instruction for 16 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (32 bit)
+
+ This function executes a exclusive STR instruction for 32 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief Remove the exclusive lock
+
+ This function removes the exclusive lock which is created by LDREX.
+
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __CLREX(void)
+{
+ __ASM volatile ("clrex" ::: "memory");
+}
+
+
+/** \brief Signed Saturate
+
+ This function saturates a signed value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/** \brief Unsigned Saturate
+
+ This function saturates an unsigned value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/** \brief Count leading zeros
+
+ This function counts the number of leading zeros of a data value.
+
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __CLZ(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("clz %0, %1" : "=r" (result) : "r" (value) );
+ return ((uint8_t) result); /* Add explicit type cast here */
+}
+
+
+/** \brief Rotate Right with Extend (32 bit)
+
+ This function moves each bit of a bitstring right by one bit. The carry input is shifted in at the left end of the bitstring.
+
+ \param [in] value Value to rotate
+ \return Rotated value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __RRX(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+}
+
+
+/** \brief LDRT Unprivileged (8 bit)
+
+ This function executes a Unprivileged LDRT instruction for 8 bit value.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __LDRBT(volatile uint8_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrbt %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return ((uint8_t) result); /* Add explicit type cast here */
+}
+
+
+/** \brief LDRT Unprivileged (16 bit)
+
+ This function executes a Unprivileged LDRT instruction for 16 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint16_t __LDRHT(volatile uint16_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrht %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return ((uint16_t) result); /* Add explicit type cast here */
+}
+
+
+/** \brief LDRT Unprivileged (32 bit)
+
+ This function executes a Unprivileged LDRT instruction for 32 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __LDRT(volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*addr) );
+ return(result);
+}
+
+
+/** \brief STRT Unprivileged (8 bit)
+
+ This function executes a Unprivileged STRT instruction for 8 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __STRBT(uint8_t value, volatile uint8_t *addr)
+{
+ __ASM volatile ("strbt %1, %0" : "=Q" (*addr) : "r" ((uint32_t)value) );
+}
+
+
+/** \brief STRT Unprivileged (16 bit)
+
+ This function executes a Unprivileged STRT instruction for 16 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __STRHT(uint16_t value, volatile uint16_t *addr)
+{
+ __ASM volatile ("strht %1, %0" : "=Q" (*addr) : "r" ((uint32_t)value) );
+}
+
+
+/** \brief STRT Unprivileged (32 bit)
+
+ This function executes a Unprivileged STRT instruction for 32 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __STRT(uint32_t value, volatile uint32_t *addr)
+{
+ __ASM volatile ("strt %1, %0" : "=Q" (*addr) : "r" (value) );
+}
+
+#endif /* (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300) */
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+#include <cmsis_iar.h>
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+#include <cmsis_ccs.h>
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all intrinsics,
+ * Including the CMSIS ones.
+ */
+
+
+#elif defined ( __CSMC__ ) /*------------------ COSMIC Compiler -------------------*/
+/* Cosmic specific functions */
+#include <cmsis_csm.h>
+
+#endif
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+#endif /* __CORE_CMINSTR_H */
diff --git a/f0/include/devices/stm32f030x6.h b/f0/include/devices/stm32f030x6.h
new file mode 100755
index 0000000000000000000000000000000000000000..6a38239938fa49612019bc62fd58973437951161
--- /dev/null
+++ b/f0/include/devices/stm32f030x6.h
@@ -0,0 +1,3162 @@
+/**
+ ******************************************************************************
+ * @file stm32f030x6.h
+ * @author MCD Application Team
+ * @version V2.2.1
+ * @date 09-January-2015
+ * @brief CMSIS STM32F030x4/STM32F030x6 devices Peripheral Access Layer Header File.
+ *
+ * This file contains:
+ * - Data structures and the address mapping for all peripherals
+ * - Peripheral's registers declarations and bits definition
+ * - Macros to access peripheral’s registers hardware
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS_Device
+ * @{
+ */
+
+/** @addtogroup stm32f030x6
+ * @{
+ */
+
+#ifndef __STM32F030x6_H
+#define __STM32F030x6_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+
+/**
+ * @brief Configuration of the Cortex-M0 Processor and Core Peripherals
+ */
+#define __CM0_REV 0 /*!< Core Revision r0p0 */
+#define __MPU_PRESENT 0 /*!< STM32F0xx do not provide MPU */
+#define __NVIC_PRIO_BITS 2 /*!< STM32F0xx uses 2 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F030x4/STM32F030x6 device Interrupt Number Definition
+ */
+typedef enum
+{
+/****** Cortex-M0 Processor Exceptions Numbers **************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */
+ SVC_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */
+
+/****** STM32F030x4/STM32F030x6 specific Interrupt Numbers **************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ RTC_IRQn = 2, /*!< RTC Interrupt through EXTI Lines 17, 19 and 20 */
+ FLASH_IRQn = 3, /*!< FLASH global Interrupt */
+ RCC_IRQn = 4, /*!< RCC Global Interrupts */
+ EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupts */
+ EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupts */
+ EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupts */
+ DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */
+ DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupts */
+ DMA1_Channel4_5_IRQn = 11, /*!< DMA1 Channel 4 and Channel 5 Interrupts */
+ ADC1_IRQn = 12, /*!< ADC1 Interrupts */
+ TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupts */
+ TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */
+ TIM3_IRQn = 16, /*!< TIM3 global Interrupt */
+ TIM14_IRQn = 19, /*!< TIM14 global Interrupt */
+ TIM16_IRQn = 21, /*!< TIM16 global Interrupt */
+ TIM17_IRQn = 22, /*!< TIM17 global Interrupt */
+ I2C1_IRQn = 23, /*!< I2C1 Event Interrupt */
+ SPI1_IRQn = 25, /*!< SPI1 global Interrupt */
+ USART1_IRQn = 27 /*!< USART1 global Interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm0.h" /* Cortex-M0 processor and core peripherals */
+#include "system_stm32f0xx.h" /* STM32F0xx System Header */
+#include <stdint.h>
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< ADC Interrupt and Status register, Address offset:0x00 */
+ __IO uint32_t IER; /*!< ADC Interrupt Enable register, Address offset:0x04 */
+ __IO uint32_t CR; /*!< ADC Control register, Address offset:0x08 */
+ __IO uint32_t CFGR1; /*!< ADC Configuration register 1, Address offset:0x0C */
+ __IO uint32_t CFGR2; /*!< ADC Configuration register 2, Address offset:0x10 */
+ __IO uint32_t SMPR; /*!< ADC Sampling time register, Address offset:0x14 */
+ uint32_t RESERVED1; /*!< Reserved, 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, 0x1C */
+ __IO uint32_t TR; /*!< ADC watchdog threshold register, Address offset:0x20 */
+ uint32_t RESERVED3; /*!< Reserved, 0x24 */
+ __IO uint32_t CHSELR; /*!< ADC channel selection register, Address offset:0x28 */
+ uint32_t RESERVED4[5]; /*!< Reserved, 0x2C */
+ __IO uint32_t DR; /*!< ADC data register, Address offset:0x40 */
+}ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CCR;
+}ADC_Common_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+ uint32_t RESERVED2; /*!< Reserved, 0x0C */
+ __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */
+ __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */
+}CRC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< DMA channel x configuration register */
+ __IO uint32_t CNDTR; /*!< DMA channel x number of data register */
+ __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */
+ __IO uint32_t CMAR; /*!< DMA channel x memory address register */
+}DMA_Channel_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */
+ __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */
+}DMA_TypeDef;
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!<EXTI Interrupt mask register, Address offset: 0x00 */
+ __IO uint32_t EMR; /*!<EXTI Event mask register, Address offset: 0x04 */
+ __IO uint32_t RTSR; /*!<EXTI Rising trigger selection register , Address offset: 0x08 */
+ __IO uint32_t FTSR; /*!<EXTI Falling trigger selection register, Address offset: 0x0C */
+ __IO uint32_t SWIER; /*!<EXTI Software interrupt event register, Address offset: 0x10 */
+ __IO uint32_t PR; /*!<EXTI Pending register, Address offset: 0x14 */
+}EXTI_TypeDef;
+
+/**
+ * @brief FLASH Registers
+ */
+typedef struct
+{
+ __IO uint32_t ACR; /*!<FLASH access control register, Address offset: 0x00 */
+ __IO uint32_t KEYR; /*!<FLASH key register, Address offset: 0x04 */
+ __IO uint32_t OPTKEYR; /*!<FLASH OPT key register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!<FLASH status register, Address offset: 0x0C */
+ __IO uint32_t CR; /*!<FLASH control register, Address offset: 0x10 */
+ __IO uint32_t AR; /*!<FLASH address register, Address offset: 0x14 */
+ __IO uint32_t RESERVED; /*!< Reserved, 0x18 */
+ __IO uint32_t OBR; /*!<FLASH option bytes register, Address offset: 0x1C */
+ __IO uint32_t WRPR; /*!<FLASH option bytes register, Address offset: 0x20 */
+}FLASH_TypeDef;
+
+
+/**
+ * @brief Option Bytes Registers
+ */
+typedef struct
+{
+ __IO uint16_t RDP; /*!< FLASH option byte Read protection, Address offset: 0x00 */
+ __IO uint16_t USER; /*!< FLASH option byte user options, Address offset: 0x02 */
+ __IO uint16_t DATA0; /*!< User data byte 0 (stored in FLASH_OBR[23:16]), Address offset: 0x04 */
+ __IO uint16_t DATA1; /*!< User data byte 1 (stored in FLASH_OBR[31:24]), Address offset: 0x06 */
+ __IO uint16_t WRP0; /*!< FLASH option byte write protection 0, Address offset: 0x08 */
+ __IO uint16_t WRP1; /*!< FLASH option byte write protection 1, Address offset: 0x0A */
+ __IO uint16_t WRP2; /*!< FLASH option byte write protection 2, Address offset: 0x0C */
+ __IO uint16_t WRP3; /*!< FLASH option byte write protection 3, Address offset: 0x0E */
+}OB_TypeDef;
+
+/**
+ * @brief General Purpose I/O
+ */
+
+typedef struct
+{
+ __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */
+ __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */
+ __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */
+ __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */
+ __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */
+ __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */
+ __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x1A */
+ __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */
+ __IO uint32_t AFR[2]; /*!< GPIO alternate function low register, Address offset: 0x20-0x24 */
+ __IO uint32_t BRR; /*!< GPIO bit reset register, Address offset: 0x28 */
+}GPIO_TypeDef;
+
+/**
+ * @brief SysTem Configuration
+ */
+
+typedef struct
+{
+ __IO uint32_t CFGR1; /*!< SYSCFG configuration register 1, Address offset: 0x00 */
+ uint32_t RESERVED; /*!< Reserved, 0x04 */
+ __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration register, Address offset: 0x14-0x08 */
+ __IO uint32_t CFGR2; /*!< SYSCFG configuration register 2, Address offset: 0x18 */
+}SYSCFG_TypeDef;
+
+/**
+ * @brief Inter-integrated Circuit Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */
+ __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */
+ __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */
+ __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */
+ __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */
+ __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */
+ __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */
+ __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */
+ __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */
+ __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */
+}I2C_TypeDef;
+
+/**
+ * @brief Independent WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */
+ __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */
+ __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */
+ __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */
+}IWDG_TypeDef;
+
+/**
+ * @brief Power Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< PWR power control register, Address offset: 0x00 */
+ __IO uint32_t CSR; /*!< PWR power control/status register, Address offset: 0x04 */
+}PWR_TypeDef;
+
+/**
+ * @brief Reset and Clock Control
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */
+ __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x04 */
+ __IO uint32_t CIR; /*!< RCC clock interrupt register, Address offset: 0x08 */
+ __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x0C */
+ __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x10 */
+ __IO uint32_t AHBENR; /*!< RCC AHB peripheral clock register, Address offset: 0x14 */
+ __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x18 */
+ __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x1C */
+ __IO uint32_t BDCR; /*!< RCC Backup domain control register, Address offset: 0x20 */
+ __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x24 */
+ __IO uint32_t AHBRSTR; /*!< RCC AHB peripheral reset register, Address offset: 0x28 */
+ __IO uint32_t CFGR2; /*!< RCC clock configuration register 2, Address offset: 0x2C */
+ __IO uint32_t CFGR3; /*!< RCC clock configuration register 3, Address offset: 0x30 */
+ __IO uint32_t CR2; /*!< RCC clock control register 2, Address offset: 0x34 */
+}RCC_TypeDef;
+
+/**
+ * @brief Real-Time Clock
+ */
+
+typedef struct
+{
+ __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */
+ __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */
+ uint32_t RESERVED1; /*!< Reserved, Address offset: 0x14 */
+ uint32_t RESERVED2; /*!< Reserved, Address offset: 0x18 */
+ __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */
+ uint32_t RESERVED3; /*!< Reserved, Address offset: 0x20 */
+ __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */
+ __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */
+ __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */
+ __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */
+ __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */
+ __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */
+ __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */
+ __IO uint32_t TAFCR; /*!< RTC tamper and alternate function configuration register, Address offset: 0x40 */
+ __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */
+}RTC_TypeDef;
+
+/**
+ * @brief Serial Peripheral Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< SPI Control register 1 (not used in I2S mode), Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */
+ __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */
+ __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */
+ __IO uint32_t RXCRCR; /*!< SPI Rx CRC register (not used in I2S mode), Address offset: 0x14 */
+ __IO uint32_t TXCRCR; /*!< SPI Tx CRC register (not used in I2S mode), Address offset: 0x18 */
+ __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */
+ __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */
+}SPI_TypeDef;
+
+/**
+ * @brief TIM
+ */
+typedef struct
+{
+ __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */
+ __IO uint32_t SMCR; /*!< TIM slave Mode Control register, Address offset: 0x08 */
+ __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */
+ __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */
+ __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */
+ __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */
+ __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */
+ __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */
+ __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */
+ __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */
+ __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */
+ __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */
+ __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */
+ __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */
+ __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */
+ __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */
+ __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */
+ __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */
+ __IO uint32_t DMAR; /*!< TIM DMA address for full transfer register, Address offset: 0x4C */
+ __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */
+}TIM_TypeDef;
+
+
+/**
+ * @brief Universal Synchronous Asynchronous Receiver Transmitter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */
+ __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */
+ __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */
+ __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */
+ __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */
+ __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */
+ __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */
+ __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */
+ __IO uint16_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */
+ uint16_t RESERVED1; /*!< Reserved, 0x26 */
+ __IO uint16_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */
+ uint16_t RESERVED2; /*!< Reserved, 0x2A */
+}USART_TypeDef;
+
+/**
+ * @brief Window WATCHDOG
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */
+ __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */
+}WWDG_TypeDef;
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_memory_map
+ * @{
+ */
+
+#define FLASH_BASE ((uint32_t)0x08000000) /*!< FLASH base address in the alias region */
+#define SRAM_BASE ((uint32_t)0x20000000) /*!< SRAM base address in the alias region */
+#define PERIPH_BASE ((uint32_t)0x40000000) /*!< Peripheral base address in the alias region */
+
+/*!< Peripheral memory map */
+#define APBPERIPH_BASE PERIPH_BASE
+#define AHBPERIPH_BASE (PERIPH_BASE + 0x00020000)
+#define AHB2PERIPH_BASE (PERIPH_BASE + 0x08000000)
+
+#define TIM3_BASE (APBPERIPH_BASE + 0x00000400)
+#define TIM14_BASE (APBPERIPH_BASE + 0x00002000)
+#define RTC_BASE (APBPERIPH_BASE + 0x00002800)
+#define WWDG_BASE (APBPERIPH_BASE + 0x00002C00)
+#define IWDG_BASE (APBPERIPH_BASE + 0x00003000)
+#define I2C1_BASE (APBPERIPH_BASE + 0x00005400)
+#define PWR_BASE (APBPERIPH_BASE + 0x00007000)
+#define SYSCFG_BASE (APBPERIPH_BASE + 0x00010000)
+#define EXTI_BASE (APBPERIPH_BASE + 0x00010400)
+#define ADC1_BASE (APBPERIPH_BASE + 0x00012400)
+#define ADC_BASE (APBPERIPH_BASE + 0x00012708)
+#define TIM1_BASE (APBPERIPH_BASE + 0x00012C00)
+#define SPI1_BASE (APBPERIPH_BASE + 0x00013000)
+#define USART1_BASE (APBPERIPH_BASE + 0x00013800)
+#define TIM16_BASE (APBPERIPH_BASE + 0x00014400)
+#define TIM17_BASE (APBPERIPH_BASE + 0x00014800)
+#define DBGMCU_BASE (APBPERIPH_BASE + 0x00015800)
+
+#define DMA1_BASE (AHBPERIPH_BASE + 0x00000000)
+#define DMA1_Channel1_BASE (DMA1_BASE + 0x00000008)
+#define DMA1_Channel2_BASE (DMA1_BASE + 0x0000001C)
+#define DMA1_Channel3_BASE (DMA1_BASE + 0x00000030)
+#define DMA1_Channel4_BASE (DMA1_BASE + 0x00000044)
+#define DMA1_Channel5_BASE (DMA1_BASE + 0x00000058)
+
+#define RCC_BASE (AHBPERIPH_BASE + 0x00001000)
+#define FLASH_R_BASE (AHBPERIPH_BASE + 0x00002000) /*!< FLASH registers base address */
+#define OB_BASE ((uint32_t)0x1FFFF800) /*!< FLASH Option Bytes base address */
+#define CRC_BASE (AHBPERIPH_BASE + 0x00003000)
+
+#define GPIOA_BASE (AHB2PERIPH_BASE + 0x00000000)
+#define GPIOB_BASE (AHB2PERIPH_BASE + 0x00000400)
+#define GPIOC_BASE (AHB2PERIPH_BASE + 0x00000800)
+#define GPIOD_BASE (AHB2PERIPH_BASE + 0x00000C00)
+#define GPIOF_BASE (AHB2PERIPH_BASE + 0x00001400)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_declaration
+ * @{
+ */
+
+#define TIM3 ((TIM_TypeDef *) TIM3_BASE)
+#define TIM14 ((TIM_TypeDef *) TIM14_BASE)
+#define RTC ((RTC_TypeDef *) RTC_BASE)
+#define WWDG ((WWDG_TypeDef *) WWDG_BASE)
+#define IWDG ((IWDG_TypeDef *) IWDG_BASE)
+#define I2C1 ((I2C_TypeDef *) I2C1_BASE)
+#define PWR ((PWR_TypeDef *) PWR_BASE)
+#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE)
+#define EXTI ((EXTI_TypeDef *) EXTI_BASE)
+#define ADC1 ((ADC_TypeDef *) ADC1_BASE)
+#define ADC ((ADC_Common_TypeDef *) ADC_BASE)
+#define TIM1 ((TIM_TypeDef *) TIM1_BASE)
+#define SPI1 ((SPI_TypeDef *) SPI1_BASE)
+#define USART1 ((USART_TypeDef *) USART1_BASE)
+#define TIM16 ((TIM_TypeDef *) TIM16_BASE)
+#define TIM17 ((TIM_TypeDef *) TIM17_BASE)
+#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE)
+#define DMA1 ((DMA_TypeDef *) DMA1_BASE)
+#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE)
+#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE)
+#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE)
+#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE)
+#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE)
+#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE)
+#define OB ((OB_TypeDef *) OB_BASE)
+#define RCC ((RCC_TypeDef *) RCC_BASE)
+#define CRC ((CRC_TypeDef *) CRC_BASE)
+#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE)
+#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE)
+#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE)
+#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE)
+#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_constants
+ * @{
+ */
+
+ /** @addtogroup Peripheral_Registers_Bits_Definition
+ * @{
+ */
+
+/******************************************************************************/
+/* Peripheral Registers Bits Definition */
+/******************************************************************************/
+/******************************************************************************/
+/* */
+/* Analog to Digital Converter (ADC) */
+/* */
+/******************************************************************************/
+/******************** Bits definition for ADC_ISR register ******************/
+#define ADC_ISR_AWD ((uint32_t)0x00000080) /*!< Analog watchdog flag */
+#define ADC_ISR_OVR ((uint32_t)0x00000010) /*!< Overrun flag */
+#define ADC_ISR_EOSEQ ((uint32_t)0x00000008) /*!< End of Sequence flag */
+#define ADC_ISR_EOC ((uint32_t)0x00000004) /*!< End of Conversion */
+#define ADC_ISR_EOSMP ((uint32_t)0x00000002) /*!< End of sampling flag */
+#define ADC_ISR_ADRDY ((uint32_t)0x00000001) /*!< ADC Ready */
+
+/* Old EOSEQ bit definition, maintained for legacy purpose */
+#define ADC_ISR_EOS ADC_ISR_EOSEQ
+
+/******************** Bits definition for ADC_IER register ******************/
+#define ADC_IER_AWDIE ((uint32_t)0x00000080) /*!< Analog Watchdog interrupt enable */
+#define ADC_IER_OVRIE ((uint32_t)0x00000010) /*!< Overrun interrupt enable */
+#define ADC_IER_EOSEQIE ((uint32_t)0x00000008) /*!< End of Sequence of conversion interrupt enable */
+#define ADC_IER_EOCIE ((uint32_t)0x00000004) /*!< End of Conversion interrupt enable */
+#define ADC_IER_EOSMPIE ((uint32_t)0x00000002) /*!< End of sampling interrupt enable */
+#define ADC_IER_ADRDYIE ((uint32_t)0x00000001) /*!< ADC Ready interrupt enable */
+
+/* Old EOSEQIE bit definition, maintained for legacy purpose */
+#define ADC_IER_EOSIE ADC_IER_EOSEQIE
+
+/******************** Bits definition for ADC_CR register *******************/
+#define ADC_CR_ADCAL ((uint32_t)0x80000000) /*!< ADC calibration */
+#define ADC_CR_ADSTP ((uint32_t)0x00000010) /*!< ADC stop of conversion command */
+#define ADC_CR_ADSTART ((uint32_t)0x00000004) /*!< ADC start of conversion */
+#define ADC_CR_ADDIS ((uint32_t)0x00000002) /*!< ADC disable command */
+#define ADC_CR_ADEN ((uint32_t)0x00000001) /*!< ADC enable control */
+
+/******************* Bits definition for ADC_CFGR1 register *****************/
+#define ADC_CFGR1_AWDCH ((uint32_t)0x7C000000) /*!< AWDCH[4:0] bits (Analog watchdog channel select bits) */
+#define ADC_CFGR1_AWDCH_0 ((uint32_t)0x04000000) /*!< Bit 0 */
+#define ADC_CFGR1_AWDCH_1 ((uint32_t)0x08000000) /*!< Bit 1 */
+#define ADC_CFGR1_AWDCH_2 ((uint32_t)0x10000000) /*!< Bit 2 */
+#define ADC_CFGR1_AWDCH_3 ((uint32_t)0x20000000) /*!< Bit 3 */
+#define ADC_CFGR1_AWDCH_4 ((uint32_t)0x40000000) /*!< Bit 4 */
+#define ADC_CFGR1_AWDEN ((uint32_t)0x00800000) /*!< Analog watchdog enable on regular channels */
+#define ADC_CFGR1_AWDSGL ((uint32_t)0x00400000) /*!< Enable the watchdog on a single channel or on all channels */
+#define ADC_CFGR1_DISCEN ((uint32_t)0x00010000) /*!< Discontinuous mode on regular channels */
+#define ADC_CFGR1_AUTOFF ((uint32_t)0x00008000) /*!< ADC auto power off */
+#define ADC_CFGR1_WAIT ((uint32_t)0x00004000) /*!< ADC wait conversion mode */
+#define ADC_CFGR1_CONT ((uint32_t)0x00002000) /*!< Continuous Conversion */
+#define ADC_CFGR1_OVRMOD ((uint32_t)0x00001000) /*!< Overrun mode */
+#define ADC_CFGR1_EXTEN ((uint32_t)0x00000C00) /*!< EXTEN[1:0] bits (External Trigger Conversion mode for regular channels) */
+#define ADC_CFGR1_EXTEN_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define ADC_CFGR1_EXTEN_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define ADC_CFGR1_EXTSEL ((uint32_t)0x000001C0) /*!< EXTSEL[2:0] bits (External Event Select for regular group) */
+#define ADC_CFGR1_EXTSEL_0 ((uint32_t)0x00000040) /*!< Bit 0 */
+#define ADC_CFGR1_EXTSEL_1 ((uint32_t)0x00000080) /*!< Bit 1 */
+#define ADC_CFGR1_EXTSEL_2 ((uint32_t)0x00000100) /*!< Bit 2 */
+#define ADC_CFGR1_ALIGN ((uint32_t)0x00000020) /*!< Data Alignment */
+#define ADC_CFGR1_RES ((uint32_t)0x00000018) /*!< RES[1:0] bits (Resolution) */
+#define ADC_CFGR1_RES_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define ADC_CFGR1_RES_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define ADC_CFGR1_SCANDIR ((uint32_t)0x00000004) /*!< Sequence scan direction */
+#define ADC_CFGR1_DMACFG ((uint32_t)0x00000002) /*!< Direct memory access configuration */
+#define ADC_CFGR1_DMAEN ((uint32_t)0x00000001) /*!< Direct memory access enable */
+
+/* Old WAIT bit definition, maintained for legacy purpose */
+#define ADC_CFGR1_AUTDLY ADC_CFGR1_WAIT
+
+/******************* Bits definition for ADC_CFGR2 register *****************/
+#define ADC_CFGR2_CKMODE ((uint32_t)0xC0000000) /*!< ADC clock mode */
+#define ADC_CFGR2_CKMODE_1 ((uint32_t)0x80000000) /*!< ADC clocked by PCLK div4 */
+#define ADC_CFGR2_CKMODE_0 ((uint32_t)0x40000000) /*!< ADC clocked by PCLK div2 */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_CFGR2_JITOFFDIV4 ADC_CFGR2_CKMODE_1 /*!< ADC clocked by PCLK div4 */
+#define ADC_CFGR2_JITOFFDIV2 ADC_CFGR2_CKMODE_0 /*!< ADC clocked by PCLK div2 */
+
+/****************** Bit definition for ADC_SMPR register ********************/
+#define ADC_SMPR_SMP ((uint32_t)0x00000007) /*!< SMP[2:0] bits (Sampling time selection) */
+#define ADC_SMPR_SMP_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define ADC_SMPR_SMP_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define ADC_SMPR_SMP_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_SMPR1_SMPR ADC_SMPR_SMP /*!< SMP[2:0] bits (Sampling time selection) */
+#define ADC_SMPR1_SMPR_0 ADC_SMPR_SMP_0 /*!< Bit 0 */
+#define ADC_SMPR1_SMPR_1 ADC_SMPR_SMP_1 /*!< Bit 1 */
+#define ADC_SMPR1_SMPR_2 ADC_SMPR_SMP_2 /*!< Bit 2 */
+
+/******************* Bit definition for ADC_TR register ********************/
+#define ADC_TR_HT ((uint32_t)0x0FFF0000) /*!< Analog watchdog high threshold */
+#define ADC_TR_LT ((uint32_t)0x00000FFF) /*!< Analog watchdog low threshold */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_HTR_HT ADC_TR_HT /*!< Analog watchdog high threshold */
+#define ADC_LTR_LT ADC_TR_LT /*!< Analog watchdog low threshold */
+
+/****************** Bit definition for ADC_CHSELR register ******************/
+#define ADC_CHSELR_CHSEL18 ((uint32_t)0x00040000) /*!< Channel 18 selection */
+#define ADC_CHSELR_CHSEL17 ((uint32_t)0x00020000) /*!< Channel 17 selection */
+#define ADC_CHSELR_CHSEL16 ((uint32_t)0x00010000) /*!< Channel 16 selection */
+#define ADC_CHSELR_CHSEL15 ((uint32_t)0x00008000) /*!< Channel 15 selection */
+#define ADC_CHSELR_CHSEL14 ((uint32_t)0x00004000) /*!< Channel 14 selection */
+#define ADC_CHSELR_CHSEL13 ((uint32_t)0x00002000) /*!< Channel 13 selection */
+#define ADC_CHSELR_CHSEL12 ((uint32_t)0x00001000) /*!< Channel 12 selection */
+#define ADC_CHSELR_CHSEL11 ((uint32_t)0x00000800) /*!< Channel 11 selection */
+#define ADC_CHSELR_CHSEL10 ((uint32_t)0x00000400) /*!< Channel 10 selection */
+#define ADC_CHSELR_CHSEL9 ((uint32_t)0x00000200) /*!< Channel 9 selection */
+#define ADC_CHSELR_CHSEL8 ((uint32_t)0x00000100) /*!< Channel 8 selection */
+#define ADC_CHSELR_CHSEL7 ((uint32_t)0x00000080) /*!< Channel 7 selection */
+#define ADC_CHSELR_CHSEL6 ((uint32_t)0x00000040) /*!< Channel 6 selection */
+#define ADC_CHSELR_CHSEL5 ((uint32_t)0x00000020) /*!< Channel 5 selection */
+#define ADC_CHSELR_CHSEL4 ((uint32_t)0x00000010) /*!< Channel 4 selection */
+#define ADC_CHSELR_CHSEL3 ((uint32_t)0x00000008) /*!< Channel 3 selection */
+#define ADC_CHSELR_CHSEL2 ((uint32_t)0x00000004) /*!< Channel 2 selection */
+#define ADC_CHSELR_CHSEL1 ((uint32_t)0x00000002) /*!< Channel 1 selection */
+#define ADC_CHSELR_CHSEL0 ((uint32_t)0x00000001) /*!< Channel 0 selection */
+
+/******************** Bit definition for ADC_DR register ********************/
+#define ADC_DR_DATA ((uint32_t)0x0000FFFF) /*!< Regular data */
+
+/******************* Bit definition for ADC_CCR register ********************/
+#define ADC_CCR_VBATEN ((uint32_t)0x01000000) /*!< Voltage battery enable */
+#define ADC_CCR_TSEN ((uint32_t)0x00800000) /*!< Tempurature sensore enable */
+#define ADC_CCR_VREFEN ((uint32_t)0x00400000) /*!< Vrefint enable */
+
+/******************************************************************************/
+/* */
+/* CRC calculation unit (CRC) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for CRC_DR register *********************/
+#define CRC_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data register bits */
+
+/******************* Bit definition for CRC_IDR register ********************/
+#define CRC_IDR_IDR ((uint8_t)0xFF) /*!< General-purpose 8-bit data register bits */
+
+/******************** Bit definition for CRC_CR register ********************/
+#define CRC_CR_RESET ((uint32_t)0x00000001) /*!< RESET the CRC computation unit bit */
+#define CRC_CR_REV_IN ((uint32_t)0x00000060) /*!< REV_IN Reverse Input Data bits */
+#define CRC_CR_REV_IN_0 ((uint32_t)0x00000020) /*!< REV_IN Bit 0 */
+#define CRC_CR_REV_IN_1 ((uint32_t)0x00000040) /*!< REV_IN Bit 1 */
+#define CRC_CR_REV_OUT ((uint32_t)0x00000080) /*!< REV_OUT Reverse Output Data bits */
+
+/******************* Bit definition for CRC_INIT register *******************/
+#define CRC_INIT_INIT ((uint32_t)0xFFFFFFFF) /*!< Initial CRC value bits */
+
+/******************************************************************************/
+/* */
+/* Debug MCU (DBGMCU) */
+/* */
+/******************************************************************************/
+
+/**************** Bit definition for DBGMCU_IDCODE register *****************/
+#define DBGMCU_IDCODE_DEV_ID ((uint32_t)0x00000FFF) /*!< Device Identifier */
+
+#define DBGMCU_IDCODE_REV_ID ((uint32_t)0xFFFF0000) /*!< REV_ID[15:0] bits (Revision Identifier) */
+#define DBGMCU_IDCODE_REV_ID_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define DBGMCU_IDCODE_REV_ID_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define DBGMCU_IDCODE_REV_ID_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define DBGMCU_IDCODE_REV_ID_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+#define DBGMCU_IDCODE_REV_ID_4 ((uint32_t)0x00100000) /*!< Bit 4 */
+#define DBGMCU_IDCODE_REV_ID_5 ((uint32_t)0x00200000) /*!< Bit 5 */
+#define DBGMCU_IDCODE_REV_ID_6 ((uint32_t)0x00400000) /*!< Bit 6 */
+#define DBGMCU_IDCODE_REV_ID_7 ((uint32_t)0x00800000) /*!< Bit 7 */
+#define DBGMCU_IDCODE_REV_ID_8 ((uint32_t)0x01000000) /*!< Bit 8 */
+#define DBGMCU_IDCODE_REV_ID_9 ((uint32_t)0x02000000) /*!< Bit 9 */
+#define DBGMCU_IDCODE_REV_ID_10 ((uint32_t)0x04000000) /*!< Bit 10 */
+#define DBGMCU_IDCODE_REV_ID_11 ((uint32_t)0x08000000) /*!< Bit 11 */
+#define DBGMCU_IDCODE_REV_ID_12 ((uint32_t)0x10000000) /*!< Bit 12 */
+#define DBGMCU_IDCODE_REV_ID_13 ((uint32_t)0x20000000) /*!< Bit 13 */
+#define DBGMCU_IDCODE_REV_ID_14 ((uint32_t)0x40000000) /*!< Bit 14 */
+#define DBGMCU_IDCODE_REV_ID_15 ((uint32_t)0x80000000) /*!< Bit 15 */
+
+/****************** Bit definition for DBGMCU_CR register *******************/
+#define DBGMCU_CR_DBG_STOP ((uint32_t)0x00000002) /*!< Debug Stop Mode */
+#define DBGMCU_CR_DBG_STANDBY ((uint32_t)0x00000004) /*!< Debug Standby mode */
+
+/****************** Bit definition for DBGMCU_APB1_FZ register **************/
+#define DBGMCU_APB1_FZ_DBG_TIM3_STOP ((uint32_t)0x00000002) /*!< TIM3 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM14_STOP ((uint32_t)0x00000100) /*!< TIM14 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_RTC_STOP ((uint32_t)0x00000400) /*!< RTC Calendar frozen when core is halted */
+#define DBGMCU_APB1_FZ_DBG_WWDG_STOP ((uint32_t)0x00000800) /*!< Debug Window Watchdog stopped when Core is halted */
+#define DBGMCU_APB1_FZ_DBG_IWDG_STOP ((uint32_t)0x00001000) /*!< Debug Independent Watchdog stopped when Core is halted */
+#define DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00200000) /*!< I2C1 SMBUS timeout mode stopped when Core is halted */
+
+/****************** Bit definition for DBGMCU_APB2_FZ register **************/
+#define DBGMCU_APB2_FZ_DBG_TIM1_STOP ((uint32_t)0x00000800) /*!< TIM1 counter stopped when core is halted */
+#define DBGMCU_APB2_FZ_DBG_TIM16_STOP ((uint32_t)0x00020000) /*!< TIM16 counter stopped when core is halted */
+#define DBGMCU_APB2_FZ_DBG_TIM17_STOP ((uint32_t)0x00040000) /*!< TIM17 counter stopped when core is halted */
+
+/******************************************************************************/
+/* */
+/* DMA Controller (DMA) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for DMA_ISR register ********************/
+#define DMA_ISR_GIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt flag */
+#define DMA_ISR_TCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete flag */
+#define DMA_ISR_HTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer flag */
+#define DMA_ISR_TEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error flag */
+#define DMA_ISR_GIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt flag */
+#define DMA_ISR_TCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete flag */
+#define DMA_ISR_HTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer flag */
+#define DMA_ISR_TEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error flag */
+#define DMA_ISR_GIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt flag */
+#define DMA_ISR_TCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete flag */
+#define DMA_ISR_HTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer flag */
+#define DMA_ISR_TEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error flag */
+#define DMA_ISR_GIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt flag */
+#define DMA_ISR_TCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete flag */
+#define DMA_ISR_HTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer flag */
+#define DMA_ISR_TEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error flag */
+#define DMA_ISR_GIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt flag */
+#define DMA_ISR_TCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete flag */
+#define DMA_ISR_HTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer flag */
+#define DMA_ISR_TEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error flag */
+
+/******************* Bit definition for DMA_IFCR register *******************/
+#define DMA_IFCR_CGIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt clear */
+#define DMA_IFCR_CTCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete clear */
+#define DMA_IFCR_CHTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer clear */
+#define DMA_IFCR_CTEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error clear */
+#define DMA_IFCR_CGIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt clear */
+#define DMA_IFCR_CTCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete clear */
+#define DMA_IFCR_CHTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer clear */
+#define DMA_IFCR_CTEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error clear */
+#define DMA_IFCR_CGIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt clear */
+#define DMA_IFCR_CTCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete clear */
+#define DMA_IFCR_CHTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer clear */
+#define DMA_IFCR_CTEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error clear */
+#define DMA_IFCR_CGIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt clear */
+#define DMA_IFCR_CTCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete clear */
+#define DMA_IFCR_CHTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer clear */
+#define DMA_IFCR_CTEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error clear */
+#define DMA_IFCR_CGIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt clear */
+#define DMA_IFCR_CTCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete clear */
+#define DMA_IFCR_CHTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer clear */
+#define DMA_IFCR_CTEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error clear */
+
+/******************* Bit definition for DMA_CCR register ********************/
+#define DMA_CCR_EN ((uint32_t)0x00000001) /*!< Channel enable */
+#define DMA_CCR_TCIE ((uint32_t)0x00000002) /*!< Transfer complete interrupt enable */
+#define DMA_CCR_HTIE ((uint32_t)0x00000004) /*!< Half Transfer interrupt enable */
+#define DMA_CCR_TEIE ((uint32_t)0x00000008) /*!< Transfer error interrupt enable */
+#define DMA_CCR_DIR ((uint32_t)0x00000010) /*!< Data transfer direction */
+#define DMA_CCR_CIRC ((uint32_t)0x00000020) /*!< Circular mode */
+#define DMA_CCR_PINC ((uint32_t)0x00000040) /*!< Peripheral increment mode */
+#define DMA_CCR_MINC ((uint32_t)0x00000080) /*!< Memory increment mode */
+
+#define DMA_CCR_PSIZE ((uint32_t)0x00000300) /*!< PSIZE[1:0] bits (Peripheral size) */
+#define DMA_CCR_PSIZE_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define DMA_CCR_PSIZE_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+
+#define DMA_CCR_MSIZE ((uint32_t)0x00000C00) /*!< MSIZE[1:0] bits (Memory size) */
+#define DMA_CCR_MSIZE_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define DMA_CCR_MSIZE_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+
+#define DMA_CCR_PL ((uint32_t)0x00003000) /*!< PL[1:0] bits(Channel Priority level)*/
+#define DMA_CCR_PL_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define DMA_CCR_PL_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+
+#define DMA_CCR_MEM2MEM ((uint32_t)0x00004000) /*!< Memory to memory mode */
+
+/****************** Bit definition for DMA_CNDTR register *******************/
+#define DMA_CNDTR_NDT ((uint32_t)0x0000FFFF) /*!< Number of data to Transfer */
+
+/****************** Bit definition for DMA_CPAR register ********************/
+#define DMA_CPAR_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */
+
+/****************** Bit definition for DMA_CMAR register ********************/
+#define DMA_CMAR_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */
+
+/******************************************************************************/
+/* */
+/* External Interrupt/Event Controller (EXTI) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for EXTI_IMR register *******************/
+#define EXTI_IMR_MR0 ((uint32_t)0x00000001) /*!< Interrupt Mask on line 0 */
+#define EXTI_IMR_MR1 ((uint32_t)0x00000002) /*!< Interrupt Mask on line 1 */
+#define EXTI_IMR_MR2 ((uint32_t)0x00000004) /*!< Interrupt Mask on line 2 */
+#define EXTI_IMR_MR3 ((uint32_t)0x00000008) /*!< Interrupt Mask on line 3 */
+#define EXTI_IMR_MR4 ((uint32_t)0x00000010) /*!< Interrupt Mask on line 4 */
+#define EXTI_IMR_MR5 ((uint32_t)0x00000020) /*!< Interrupt Mask on line 5 */
+#define EXTI_IMR_MR6 ((uint32_t)0x00000040) /*!< Interrupt Mask on line 6 */
+#define EXTI_IMR_MR7 ((uint32_t)0x00000080) /*!< Interrupt Mask on line 7 */
+#define EXTI_IMR_MR8 ((uint32_t)0x00000100) /*!< Interrupt Mask on line 8 */
+#define EXTI_IMR_MR9 ((uint32_t)0x00000200) /*!< Interrupt Mask on line 9 */
+#define EXTI_IMR_MR10 ((uint32_t)0x00000400) /*!< Interrupt Mask on line 10 */
+#define EXTI_IMR_MR11 ((uint32_t)0x00000800) /*!< Interrupt Mask on line 11 */
+#define EXTI_IMR_MR12 ((uint32_t)0x00001000) /*!< Interrupt Mask on line 12 */
+#define EXTI_IMR_MR13 ((uint32_t)0x00002000) /*!< Interrupt Mask on line 13 */
+#define EXTI_IMR_MR14 ((uint32_t)0x00004000) /*!< Interrupt Mask on line 14 */
+#define EXTI_IMR_MR15 ((uint32_t)0x00008000) /*!< Interrupt Mask on line 15 */
+#define EXTI_IMR_MR16 ((uint32_t)0x00010000) /*!< Interrupt Mask on line 16 */
+#define EXTI_IMR_MR17 ((uint32_t)0x00020000) /*!< Interrupt Mask on line 17 */
+#define EXTI_IMR_MR19 ((uint32_t)0x00080000) /*!< Interrupt Mask on line 19 */
+#define EXTI_IMR_MR21 ((uint32_t)0x00200000) /*!< Interrupt Mask on line 21 */
+#define EXTI_IMR_MR22 ((uint32_t)0x00400000) /*!< Interrupt Mask on line 22 */
+#define EXTI_IMR_MR23 ((uint32_t)0x00800000) /*!< Interrupt Mask on line 23 */
+#define EXTI_IMR_MR25 ((uint32_t)0x02000000) /*!< Interrupt Mask on line 25 */
+#define EXTI_IMR_MR27 ((uint32_t)0x08000000) /*!< Interrupt Mask on line 27 */
+
+/****************** Bit definition for EXTI_EMR register ********************/
+#define EXTI_EMR_MR0 ((uint32_t)0x00000001) /*!< Event Mask on line 0 */
+#define EXTI_EMR_MR1 ((uint32_t)0x00000002) /*!< Event Mask on line 1 */
+#define EXTI_EMR_MR2 ((uint32_t)0x00000004) /*!< Event Mask on line 2 */
+#define EXTI_EMR_MR3 ((uint32_t)0x00000008) /*!< Event Mask on line 3 */
+#define EXTI_EMR_MR4 ((uint32_t)0x00000010) /*!< Event Mask on line 4 */
+#define EXTI_EMR_MR5 ((uint32_t)0x00000020) /*!< Event Mask on line 5 */
+#define EXTI_EMR_MR6 ((uint32_t)0x00000040) /*!< Event Mask on line 6 */
+#define EXTI_EMR_MR7 ((uint32_t)0x00000080) /*!< Event Mask on line 7 */
+#define EXTI_EMR_MR8 ((uint32_t)0x00000100) /*!< Event Mask on line 8 */
+#define EXTI_EMR_MR9 ((uint32_t)0x00000200) /*!< Event Mask on line 9 */
+#define EXTI_EMR_MR10 ((uint32_t)0x00000400) /*!< Event Mask on line 10 */
+#define EXTI_EMR_MR11 ((uint32_t)0x00000800) /*!< Event Mask on line 11 */
+#define EXTI_EMR_MR12 ((uint32_t)0x00001000) /*!< Event Mask on line 12 */
+#define EXTI_EMR_MR13 ((uint32_t)0x00002000) /*!< Event Mask on line 13 */
+#define EXTI_EMR_MR14 ((uint32_t)0x00004000) /*!< Event Mask on line 14 */
+#define EXTI_EMR_MR15 ((uint32_t)0x00008000) /*!< Event Mask on line 15 */
+#define EXTI_EMR_MR16 ((uint32_t)0x00010000) /*!< Event Mask on line 16 */
+#define EXTI_EMR_MR17 ((uint32_t)0x00020000) /*!< Event Mask on line 17 */
+#define EXTI_EMR_MR19 ((uint32_t)0x00080000) /*!< Event Mask on line 19 */
+#define EXTI_EMR_MR21 ((uint32_t)0x00200000) /*!< Event Mask on line 21 */
+#define EXTI_EMR_MR22 ((uint32_t)0x00400000) /*!< Event Mask on line 22 */
+#define EXTI_EMR_MR23 ((uint32_t)0x00800000) /*!< Event Mask on line 23 */
+#define EXTI_EMR_MR25 ((uint32_t)0x02000000) /*!< Event Mask on line 25 */
+#define EXTI_EMR_MR27 ((uint32_t)0x08000000) /*!< Event Mask on line 27 */
+
+/******************* Bit definition for EXTI_RTSR register ******************/
+#define EXTI_RTSR_TR0 ((uint32_t)0x00000001) /*!< Rising trigger event configuration bit of line 0 */
+#define EXTI_RTSR_TR1 ((uint32_t)0x00000002) /*!< Rising trigger event configuration bit of line 1 */
+#define EXTI_RTSR_TR2 ((uint32_t)0x00000004) /*!< Rising trigger event configuration bit of line 2 */
+#define EXTI_RTSR_TR3 ((uint32_t)0x00000008) /*!< Rising trigger event configuration bit of line 3 */
+#define EXTI_RTSR_TR4 ((uint32_t)0x00000010) /*!< Rising trigger event configuration bit of line 4 */
+#define EXTI_RTSR_TR5 ((uint32_t)0x00000020) /*!< Rising trigger event configuration bit of line 5 */
+#define EXTI_RTSR_TR6 ((uint32_t)0x00000040) /*!< Rising trigger event configuration bit of line 6 */
+#define EXTI_RTSR_TR7 ((uint32_t)0x00000080) /*!< Rising trigger event configuration bit of line 7 */
+#define EXTI_RTSR_TR8 ((uint32_t)0x00000100) /*!< Rising trigger event configuration bit of line 8 */
+#define EXTI_RTSR_TR9 ((uint32_t)0x00000200) /*!< Rising trigger event configuration bit of line 9 */
+#define EXTI_RTSR_TR10 ((uint32_t)0x00000400) /*!< Rising trigger event configuration bit of line 10 */
+#define EXTI_RTSR_TR11 ((uint32_t)0x00000800) /*!< Rising trigger event configuration bit of line 11 */
+#define EXTI_RTSR_TR12 ((uint32_t)0x00001000) /*!< Rising trigger event configuration bit of line 12 */
+#define EXTI_RTSR_TR13 ((uint32_t)0x00002000) /*!< Rising trigger event configuration bit of line 13 */
+#define EXTI_RTSR_TR14 ((uint32_t)0x00004000) /*!< Rising trigger event configuration bit of line 14 */
+#define EXTI_RTSR_TR15 ((uint32_t)0x00008000) /*!< Rising trigger event configuration bit of line 15 */
+#define EXTI_RTSR_TR16 ((uint32_t)0x00010000) /*!< Rising trigger event configuration bit of line 16 */
+#define EXTI_RTSR_TR17 ((uint32_t)0x00020000) /*!< Rising trigger event configuration bit of line 17 */
+#define EXTI_RTSR_TR19 ((uint32_t)0x00080000) /*!< Rising trigger event configuration bit of line 19 */
+
+/******************* Bit definition for EXTI_FTSR register *******************/
+#define EXTI_FTSR_TR0 ((uint32_t)0x00000001) /*!< Falling trigger event configuration bit of line 0 */
+#define EXTI_FTSR_TR1 ((uint32_t)0x00000002) /*!< Falling trigger event configuration bit of line 1 */
+#define EXTI_FTSR_TR2 ((uint32_t)0x00000004) /*!< Falling trigger event configuration bit of line 2 */
+#define EXTI_FTSR_TR3 ((uint32_t)0x00000008) /*!< Falling trigger event configuration bit of line 3 */
+#define EXTI_FTSR_TR4 ((uint32_t)0x00000010) /*!< Falling trigger event configuration bit of line 4 */
+#define EXTI_FTSR_TR5 ((uint32_t)0x00000020) /*!< Falling trigger event configuration bit of line 5 */
+#define EXTI_FTSR_TR6 ((uint32_t)0x00000040) /*!< Falling trigger event configuration bit of line 6 */
+#define EXTI_FTSR_TR7 ((uint32_t)0x00000080) /*!< Falling trigger event configuration bit of line 7 */
+#define EXTI_FTSR_TR8 ((uint32_t)0x00000100) /*!< Falling trigger event configuration bit of line 8 */
+#define EXTI_FTSR_TR9 ((uint32_t)0x00000200) /*!< Falling trigger event configuration bit of line 9 */
+#define EXTI_FTSR_TR10 ((uint32_t)0x00000400) /*!< Falling trigger event configuration bit of line 10 */
+#define EXTI_FTSR_TR11 ((uint32_t)0x00000800) /*!< Falling trigger event configuration bit of line 11 */
+#define EXTI_FTSR_TR12 ((uint32_t)0x00001000) /*!< Falling trigger event configuration bit of line 12 */
+#define EXTI_FTSR_TR13 ((uint32_t)0x00002000) /*!< Falling trigger event configuration bit of line 13 */
+#define EXTI_FTSR_TR14 ((uint32_t)0x00004000) /*!< Falling trigger event configuration bit of line 14 */
+#define EXTI_FTSR_TR15 ((uint32_t)0x00008000) /*!< Falling trigger event configuration bit of line 15 */
+#define EXTI_FTSR_TR16 ((uint32_t)0x00010000) /*!< Falling trigger event configuration bit of line 16 */
+#define EXTI_FTSR_TR17 ((uint32_t)0x00020000) /*!< Falling trigger event configuration bit of line 17 */
+#define EXTI_FTSR_TR19 ((uint32_t)0x00080000) /*!< Falling trigger event configuration bit of line 19 */
+
+/******************* Bit definition for EXTI_SWIER register *******************/
+#define EXTI_SWIER_SWIER0 ((uint32_t)0x00000001) /*!< Software Interrupt on line 0 */
+#define EXTI_SWIER_SWIER1 ((uint32_t)0x00000002) /*!< Software Interrupt on line 1 */
+#define EXTI_SWIER_SWIER2 ((uint32_t)0x00000004) /*!< Software Interrupt on line 2 */
+#define EXTI_SWIER_SWIER3 ((uint32_t)0x00000008) /*!< Software Interrupt on line 3 */
+#define EXTI_SWIER_SWIER4 ((uint32_t)0x00000010) /*!< Software Interrupt on line 4 */
+#define EXTI_SWIER_SWIER5 ((uint32_t)0x00000020) /*!< Software Interrupt on line 5 */
+#define EXTI_SWIER_SWIER6 ((uint32_t)0x00000040) /*!< Software Interrupt on line 6 */
+#define EXTI_SWIER_SWIER7 ((uint32_t)0x00000080) /*!< Software Interrupt on line 7 */
+#define EXTI_SWIER_SWIER8 ((uint32_t)0x00000100) /*!< Software Interrupt on line 8 */
+#define EXTI_SWIER_SWIER9 ((uint32_t)0x00000200) /*!< Software Interrupt on line 9 */
+#define EXTI_SWIER_SWIER10 ((uint32_t)0x00000400) /*!< Software Interrupt on line 10 */
+#define EXTI_SWIER_SWIER11 ((uint32_t)0x00000800) /*!< Software Interrupt on line 11 */
+#define EXTI_SWIER_SWIER12 ((uint32_t)0x00001000) /*!< Software Interrupt on line 12 */
+#define EXTI_SWIER_SWIER13 ((uint32_t)0x00002000) /*!< Software Interrupt on line 13 */
+#define EXTI_SWIER_SWIER14 ((uint32_t)0x00004000) /*!< Software Interrupt on line 14 */
+#define EXTI_SWIER_SWIER15 ((uint32_t)0x00008000) /*!< Software Interrupt on line 15 */
+#define EXTI_SWIER_SWIER16 ((uint32_t)0x00010000) /*!< Software Interrupt on line 16 */
+#define EXTI_SWIER_SWIER17 ((uint32_t)0x00020000) /*!< Software Interrupt on line 17 */
+#define EXTI_SWIER_SWIER19 ((uint32_t)0x00080000) /*!< Software Interrupt on line 19 */
+
+/****************** Bit definition for EXTI_PR register *********************/
+#define EXTI_PR_PR0 ((uint32_t)0x00000001) /*!< Pending bit 0 */
+#define EXTI_PR_PR1 ((uint32_t)0x00000002) /*!< Pending bit 1 */
+#define EXTI_PR_PR2 ((uint32_t)0x00000004) /*!< Pending bit 2 */
+#define EXTI_PR_PR3 ((uint32_t)0x00000008) /*!< Pending bit 3 */
+#define EXTI_PR_PR4 ((uint32_t)0x00000010) /*!< Pending bit 4 */
+#define EXTI_PR_PR5 ((uint32_t)0x00000020) /*!< Pending bit 5 */
+#define EXTI_PR_PR6 ((uint32_t)0x00000040) /*!< Pending bit 6 */
+#define EXTI_PR_PR7 ((uint32_t)0x00000080) /*!< Pending bit 7 */
+#define EXTI_PR_PR8 ((uint32_t)0x00000100) /*!< Pending bit 8 */
+#define EXTI_PR_PR9 ((uint32_t)0x00000200) /*!< Pending bit 9 */
+#define EXTI_PR_PR10 ((uint32_t)0x00000400) /*!< Pending bit 10 */
+#define EXTI_PR_PR11 ((uint32_t)0x00000800) /*!< Pending bit 11 */
+#define EXTI_PR_PR12 ((uint32_t)0x00001000) /*!< Pending bit 12 */
+#define EXTI_PR_PR13 ((uint32_t)0x00002000) /*!< Pending bit 13 */
+#define EXTI_PR_PR14 ((uint32_t)0x00004000) /*!< Pending bit 14 */
+#define EXTI_PR_PR15 ((uint32_t)0x00008000) /*!< Pending bit 15 */
+#define EXTI_PR_PR16 ((uint32_t)0x00010000) /*!< Pending bit 16 */
+#define EXTI_PR_PR17 ((uint32_t)0x00020000) /*!< Pending bit 17 */
+#define EXTI_PR_PR19 ((uint32_t)0x00080000) /*!< Pending bit 19 */
+
+/******************************************************************************/
+/* */
+/* FLASH and Option Bytes Registers */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for FLASH_ACR register ******************/
+#define FLASH_ACR_LATENCY ((uint32_t)0x00000001) /*!< LATENCY bit (Latency) */
+
+#define FLASH_ACR_PRFTBE ((uint32_t)0x00000010) /*!< Prefetch Buffer Enable */
+#define FLASH_ACR_PRFTBS ((uint32_t)0x00000020) /*!< Prefetch Buffer Status */
+
+/****************** Bit definition for FLASH_KEYR register ******************/
+#define FLASH_KEYR_FKEYR ((uint32_t)0xFFFFFFFF) /*!< FPEC Key */
+
+/***************** Bit definition for FLASH_OPTKEYR register ****************/
+#define FLASH_OPTKEYR_OPTKEYR ((uint32_t)0xFFFFFFFF) /*!< Option Byte Key */
+
+/****************** FLASH Keys **********************************************/
+#define FLASH_FKEY1 ((uint32_t)0x45670123) /*!< Flash program erase key1 */
+#define FLASH_FKEY2 ((uint32_t)0xCDEF89AB) /*!< Flash program erase key2: used with FLASH_PEKEY1
+ to unlock the write access to the FPEC. */
+
+#define FLASH_OPTKEY1 ((uint32_t)0x45670123) /*!< Flash option key1 */
+#define FLASH_OPTKEY2 ((uint32_t)0xCDEF89AB) /*!< Flash option key2: used with FLASH_OPTKEY1 to
+ unlock the write access to the option byte block */
+
+/****************** Bit definition for FLASH_SR register *******************/
+#define FLASH_SR_BSY ((uint32_t)0x00000001) /*!< Busy */
+#define FLASH_SR_PGERR ((uint32_t)0x00000004) /*!< Programming Error */
+#define FLASH_SR_WRPRTERR ((uint32_t)0x00000010) /*!< Write Protection Error */
+#define FLASH_SR_EOP ((uint32_t)0x00000020) /*!< End of operation */
+#define FLASH_SR_WRPERR FLASH_SR_WRPRTERR /*!< Legacy of Write Protection Error */
+
+/******************* Bit definition for FLASH_CR register *******************/
+#define FLASH_CR_PG ((uint32_t)0x00000001) /*!< Programming */
+#define FLASH_CR_PER ((uint32_t)0x00000002) /*!< Page Erase */
+#define FLASH_CR_MER ((uint32_t)0x00000004) /*!< Mass Erase */
+#define FLASH_CR_OPTPG ((uint32_t)0x00000010) /*!< Option Byte Programming */
+#define FLASH_CR_OPTER ((uint32_t)0x00000020) /*!< Option Byte Erase */
+#define FLASH_CR_STRT ((uint32_t)0x00000040) /*!< Start */
+#define FLASH_CR_LOCK ((uint32_t)0x00000080) /*!< Lock */
+#define FLASH_CR_OPTWRE ((uint32_t)0x00000200) /*!< Option Bytes Write Enable */
+#define FLASH_CR_ERRIE ((uint32_t)0x00000400) /*!< Error Interrupt Enable */
+#define FLASH_CR_EOPIE ((uint32_t)0x00001000) /*!< End of operation interrupt enable */
+#define FLASH_CR_OBL_LAUNCH ((uint32_t)0x00002000) /*!< Option Bytes Loader Launch */
+
+/******************* Bit definition for FLASH_AR register *******************/
+#define FLASH_AR_FAR ((uint32_t)0xFFFFFFFF) /*!< Flash Address */
+
+/****************** Bit definition for FLASH_OBR register *******************/
+#define FLASH_OBR_OPTERR ((uint32_t)0x00000001) /*!< Option Byte Error */
+#define FLASH_OBR_RDPRT1 ((uint32_t)0x00000002) /*!< Read protection Level 1 */
+#define FLASH_OBR_RDPRT2 ((uint32_t)0x00000004) /*!< Read protection Level 2 */
+
+#define FLASH_OBR_USER ((uint32_t)0x00003700) /*!< User Option Bytes */
+#define FLASH_OBR_IWDG_SW ((uint32_t)0x00000100) /*!< IWDG SW */
+#define FLASH_OBR_nRST_STOP ((uint32_t)0x00000200) /*!< nRST_STOP */
+#define FLASH_OBR_nRST_STDBY ((uint32_t)0x00000400) /*!< nRST_STDBY */
+#define FLASH_OBR_nBOOT1 ((uint32_t)0x00001000) /*!< nBOOT1 */
+#define FLASH_OBR_VDDA_MONITOR ((uint32_t)0x00002000) /*!< VDDA power supply supervisor */
+
+/* Old BOOT1 bit definition, maintained for legacy purpose */
+#define FLASH_OBR_BOOT1 FLASH_OBR_nBOOT1
+
+/* Old OBR_VDDA bit definition, maintained for legacy purpose */
+#define FLASH_OBR_VDDA_ANALOG FLASH_OBR_VDDA_MONITOR
+
+/****************** Bit definition for FLASH_WRPR register ******************/
+#define FLASH_WRPR_WRP ((uint32_t)0x0000FFFF) /*!< Write Protect */
+
+/*----------------------------------------------------------------------------*/
+
+/****************** Bit definition for OB_RDP register **********************/
+#define OB_RDP_RDP ((uint32_t)0x000000FF) /*!< Read protection option byte */
+#define OB_RDP_nRDP ((uint32_t)0x0000FF00) /*!< Read protection complemented option byte */
+
+/****************** Bit definition for OB_USER register *********************/
+#define OB_USER_USER ((uint32_t)0x00FF0000) /*!< User option byte */
+#define OB_USER_nUSER ((uint32_t)0xFF000000) /*!< User complemented option byte */
+
+/****************** Bit definition for OB_WRP0 register *********************/
+#define OB_WRP0_WRP0 ((uint32_t)0x000000FF) /*!< Flash memory write protection option bytes */
+#define OB_WRP0_nWRP0 ((uint32_t)0x0000FF00) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for OB_WRP1 register *********************/
+#define OB_WRP1_WRP1 ((uint32_t)0x00FF0000) /*!< Flash memory write protection option bytes */
+#define OB_WRP1_nWRP1 ((uint32_t)0xFF000000) /*!< Flash memory write protection complemented option bytes */
+
+/******************************************************************************/
+/* */
+/* General Purpose IOs (GPIO) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for GPIO_MODER register *****************/
+#define GPIO_MODER_MODER0 ((uint32_t)0x00000003)
+#define GPIO_MODER_MODER0_0 ((uint32_t)0x00000001)
+#define GPIO_MODER_MODER0_1 ((uint32_t)0x00000002)
+#define GPIO_MODER_MODER1 ((uint32_t)0x0000000C)
+#define GPIO_MODER_MODER1_0 ((uint32_t)0x00000004)
+#define GPIO_MODER_MODER1_1 ((uint32_t)0x00000008)
+#define GPIO_MODER_MODER2 ((uint32_t)0x00000030)
+#define GPIO_MODER_MODER2_0 ((uint32_t)0x00000010)
+#define GPIO_MODER_MODER2_1 ((uint32_t)0x00000020)
+#define GPIO_MODER_MODER3 ((uint32_t)0x000000C0)
+#define GPIO_MODER_MODER3_0 ((uint32_t)0x00000040)
+#define GPIO_MODER_MODER3_1 ((uint32_t)0x00000080)
+#define GPIO_MODER_MODER4 ((uint32_t)0x00000300)
+#define GPIO_MODER_MODER4_0 ((uint32_t)0x00000100)
+#define GPIO_MODER_MODER4_1 ((uint32_t)0x00000200)
+#define GPIO_MODER_MODER5 ((uint32_t)0x00000C00)
+#define GPIO_MODER_MODER5_0 ((uint32_t)0x00000400)
+#define GPIO_MODER_MODER5_1 ((uint32_t)0x00000800)
+#define GPIO_MODER_MODER6 ((uint32_t)0x00003000)
+#define GPIO_MODER_MODER6_0 ((uint32_t)0x00001000)
+#define GPIO_MODER_MODER6_1 ((uint32_t)0x00002000)
+#define GPIO_MODER_MODER7 ((uint32_t)0x0000C000)
+#define GPIO_MODER_MODER7_0 ((uint32_t)0x00004000)
+#define GPIO_MODER_MODER7_1 ((uint32_t)0x00008000)
+#define GPIO_MODER_MODER8 ((uint32_t)0x00030000)
+#define GPIO_MODER_MODER8_0 ((uint32_t)0x00010000)
+#define GPIO_MODER_MODER8_1 ((uint32_t)0x00020000)
+#define GPIO_MODER_MODER9 ((uint32_t)0x000C0000)
+#define GPIO_MODER_MODER9_0 ((uint32_t)0x00040000)
+#define GPIO_MODER_MODER9_1 ((uint32_t)0x00080000)
+#define GPIO_MODER_MODER10 ((uint32_t)0x00300000)
+#define GPIO_MODER_MODER10_0 ((uint32_t)0x00100000)
+#define GPIO_MODER_MODER10_1 ((uint32_t)0x00200000)
+#define GPIO_MODER_MODER11 ((uint32_t)0x00C00000)
+#define GPIO_MODER_MODER11_0 ((uint32_t)0x00400000)
+#define GPIO_MODER_MODER11_1 ((uint32_t)0x00800000)
+#define GPIO_MODER_MODER12 ((uint32_t)0x03000000)
+#define GPIO_MODER_MODER12_0 ((uint32_t)0x01000000)
+#define GPIO_MODER_MODER12_1 ((uint32_t)0x02000000)
+#define GPIO_MODER_MODER13 ((uint32_t)0x0C000000)
+#define GPIO_MODER_MODER13_0 ((uint32_t)0x04000000)
+#define GPIO_MODER_MODER13_1 ((uint32_t)0x08000000)
+#define GPIO_MODER_MODER14 ((uint32_t)0x30000000)
+#define GPIO_MODER_MODER14_0 ((uint32_t)0x10000000)
+#define GPIO_MODER_MODER14_1 ((uint32_t)0x20000000)
+#define GPIO_MODER_MODER15 ((uint32_t)0xC0000000)
+#define GPIO_MODER_MODER15_0 ((uint32_t)0x40000000)
+#define GPIO_MODER_MODER15_1 ((uint32_t)0x80000000)
+
+/****************** Bit definition for GPIO_OTYPER register *****************/
+#define GPIO_OTYPER_OT_0 ((uint32_t)0x00000001)
+#define GPIO_OTYPER_OT_1 ((uint32_t)0x00000002)
+#define GPIO_OTYPER_OT_2 ((uint32_t)0x00000004)
+#define GPIO_OTYPER_OT_3 ((uint32_t)0x00000008)
+#define GPIO_OTYPER_OT_4 ((uint32_t)0x00000010)
+#define GPIO_OTYPER_OT_5 ((uint32_t)0x00000020)
+#define GPIO_OTYPER_OT_6 ((uint32_t)0x00000040)
+#define GPIO_OTYPER_OT_7 ((uint32_t)0x00000080)
+#define GPIO_OTYPER_OT_8 ((uint32_t)0x00000100)
+#define GPIO_OTYPER_OT_9 ((uint32_t)0x00000200)
+#define GPIO_OTYPER_OT_10 ((uint32_t)0x00000400)
+#define GPIO_OTYPER_OT_11 ((uint32_t)0x00000800)
+#define GPIO_OTYPER_OT_12 ((uint32_t)0x00001000)
+#define GPIO_OTYPER_OT_13 ((uint32_t)0x00002000)
+#define GPIO_OTYPER_OT_14 ((uint32_t)0x00004000)
+#define GPIO_OTYPER_OT_15 ((uint32_t)0x00008000)
+
+/**************** Bit definition for GPIO_OSPEEDR register ******************/
+#define GPIO_OSPEEDR_OSPEEDR0 ((uint32_t)0x00000003)
+#define GPIO_OSPEEDR_OSPEEDR0_0 ((uint32_t)0x00000001)
+#define GPIO_OSPEEDR_OSPEEDR0_1 ((uint32_t)0x00000002)
+#define GPIO_OSPEEDR_OSPEEDR1 ((uint32_t)0x0000000C)
+#define GPIO_OSPEEDR_OSPEEDR1_0 ((uint32_t)0x00000004)
+#define GPIO_OSPEEDR_OSPEEDR1_1 ((uint32_t)0x00000008)
+#define GPIO_OSPEEDR_OSPEEDR2 ((uint32_t)0x00000030)
+#define GPIO_OSPEEDR_OSPEEDR2_0 ((uint32_t)0x00000010)
+#define GPIO_OSPEEDR_OSPEEDR2_1 ((uint32_t)0x00000020)
+#define GPIO_OSPEEDR_OSPEEDR3 ((uint32_t)0x000000C0)
+#define GPIO_OSPEEDR_OSPEEDR3_0 ((uint32_t)0x00000040)
+#define GPIO_OSPEEDR_OSPEEDR3_1 ((uint32_t)0x00000080)
+#define GPIO_OSPEEDR_OSPEEDR4 ((uint32_t)0x00000300)
+#define GPIO_OSPEEDR_OSPEEDR4_0 ((uint32_t)0x00000100)
+#define GPIO_OSPEEDR_OSPEEDR4_1 ((uint32_t)0x00000200)
+#define GPIO_OSPEEDR_OSPEEDR5 ((uint32_t)0x00000C00)
+#define GPIO_OSPEEDR_OSPEEDR5_0 ((uint32_t)0x00000400)
+#define GPIO_OSPEEDR_OSPEEDR5_1 ((uint32_t)0x00000800)
+#define GPIO_OSPEEDR_OSPEEDR6 ((uint32_t)0x00003000)
+#define GPIO_OSPEEDR_OSPEEDR6_0 ((uint32_t)0x00001000)
+#define GPIO_OSPEEDR_OSPEEDR6_1 ((uint32_t)0x00002000)
+#define GPIO_OSPEEDR_OSPEEDR7 ((uint32_t)0x0000C000)
+#define GPIO_OSPEEDR_OSPEEDR7_0 ((uint32_t)0x00004000)
+#define GPIO_OSPEEDR_OSPEEDR7_1 ((uint32_t)0x00008000)
+#define GPIO_OSPEEDR_OSPEEDR8 ((uint32_t)0x00030000)
+#define GPIO_OSPEEDR_OSPEEDR8_0 ((uint32_t)0x00010000)
+#define GPIO_OSPEEDR_OSPEEDR8_1 ((uint32_t)0x00020000)
+#define GPIO_OSPEEDR_OSPEEDR9 ((uint32_t)0x000C0000)
+#define GPIO_OSPEEDR_OSPEEDR9_0 ((uint32_t)0x00040000)
+#define GPIO_OSPEEDR_OSPEEDR9_1 ((uint32_t)0x00080000)
+#define GPIO_OSPEEDR_OSPEEDR10 ((uint32_t)0x00300000)
+#define GPIO_OSPEEDR_OSPEEDR10_0 ((uint32_t)0x00100000)
+#define GPIO_OSPEEDR_OSPEEDR10_1 ((uint32_t)0x00200000)
+#define GPIO_OSPEEDR_OSPEEDR11 ((uint32_t)0x00C00000)
+#define GPIO_OSPEEDR_OSPEEDR11_0 ((uint32_t)0x00400000)
+#define GPIO_OSPEEDR_OSPEEDR11_1 ((uint32_t)0x00800000)
+#define GPIO_OSPEEDR_OSPEEDR12 ((uint32_t)0x03000000)
+#define GPIO_OSPEEDR_OSPEEDR12_0 ((uint32_t)0x01000000)
+#define GPIO_OSPEEDR_OSPEEDR12_1 ((uint32_t)0x02000000)
+#define GPIO_OSPEEDR_OSPEEDR13 ((uint32_t)0x0C000000)
+#define GPIO_OSPEEDR_OSPEEDR13_0 ((uint32_t)0x04000000)
+#define GPIO_OSPEEDR_OSPEEDR13_1 ((uint32_t)0x08000000)
+#define GPIO_OSPEEDR_OSPEEDR14 ((uint32_t)0x30000000)
+#define GPIO_OSPEEDR_OSPEEDR14_0 ((uint32_t)0x10000000)
+#define GPIO_OSPEEDR_OSPEEDR14_1 ((uint32_t)0x20000000)
+#define GPIO_OSPEEDR_OSPEEDR15 ((uint32_t)0xC0000000)
+#define GPIO_OSPEEDR_OSPEEDR15_0 ((uint32_t)0x40000000)
+#define GPIO_OSPEEDR_OSPEEDR15_1 ((uint32_t)0x80000000)
+
+/* Old Bit definition for GPIO_OSPEEDR register maintained for legacy purpose */
+#define GPIO_OSPEEDER_OSPEEDR0 GPIO_OSPEEDR_OSPEEDR0
+#define GPIO_OSPEEDER_OSPEEDR0_0 GPIO_OSPEEDR_OSPEEDR0_0
+#define GPIO_OSPEEDER_OSPEEDR0_1 GPIO_OSPEEDR_OSPEEDR0_1
+#define GPIO_OSPEEDER_OSPEEDR1 GPIO_OSPEEDR_OSPEEDR1
+#define GPIO_OSPEEDER_OSPEEDR1_0 GPIO_OSPEEDR_OSPEEDR1_0
+#define GPIO_OSPEEDER_OSPEEDR1_1 GPIO_OSPEEDR_OSPEEDR1_1
+#define GPIO_OSPEEDER_OSPEEDR2 GPIO_OSPEEDR_OSPEEDR2
+#define GPIO_OSPEEDER_OSPEEDR2_0 GPIO_OSPEEDR_OSPEEDR2_0
+#define GPIO_OSPEEDER_OSPEEDR2_1 GPIO_OSPEEDR_OSPEEDR2_1
+#define GPIO_OSPEEDER_OSPEEDR3 GPIO_OSPEEDR_OSPEEDR3
+#define GPIO_OSPEEDER_OSPEEDR3_0 GPIO_OSPEEDR_OSPEEDR3_0
+#define GPIO_OSPEEDER_OSPEEDR3_1 GPIO_OSPEEDR_OSPEEDR3_1
+#define GPIO_OSPEEDER_OSPEEDR4 GPIO_OSPEEDR_OSPEEDR4
+#define GPIO_OSPEEDER_OSPEEDR4_0 GPIO_OSPEEDR_OSPEEDR4_0
+#define GPIO_OSPEEDER_OSPEEDR4_1 GPIO_OSPEEDR_OSPEEDR4_1
+#define GPIO_OSPEEDER_OSPEEDR5 GPIO_OSPEEDR_OSPEEDR5
+#define GPIO_OSPEEDER_OSPEEDR5_0 GPIO_OSPEEDR_OSPEEDR5_0
+#define GPIO_OSPEEDER_OSPEEDR5_1 GPIO_OSPEEDR_OSPEEDR5_1
+#define GPIO_OSPEEDER_OSPEEDR6 GPIO_OSPEEDR_OSPEEDR6
+#define GPIO_OSPEEDER_OSPEEDR6_0 GPIO_OSPEEDR_OSPEEDR6_0
+#define GPIO_OSPEEDER_OSPEEDR6_1 GPIO_OSPEEDR_OSPEEDR6_1
+#define GPIO_OSPEEDER_OSPEEDR7 GPIO_OSPEEDR_OSPEEDR7
+#define GPIO_OSPEEDER_OSPEEDR7_0 GPIO_OSPEEDR_OSPEEDR7_0
+#define GPIO_OSPEEDER_OSPEEDR7_1 GPIO_OSPEEDR_OSPEEDR7_1
+#define GPIO_OSPEEDER_OSPEEDR8 GPIO_OSPEEDR_OSPEEDR8
+#define GPIO_OSPEEDER_OSPEEDR8_0 GPIO_OSPEEDR_OSPEEDR8_0
+#define GPIO_OSPEEDER_OSPEEDR8_1 GPIO_OSPEEDR_OSPEEDR8_1
+#define GPIO_OSPEEDER_OSPEEDR9 GPIO_OSPEEDR_OSPEEDR9
+#define GPIO_OSPEEDER_OSPEEDR9_0 GPIO_OSPEEDR_OSPEEDR9_0
+#define GPIO_OSPEEDER_OSPEEDR9_1 GPIO_OSPEEDR_OSPEEDR9_1
+#define GPIO_OSPEEDER_OSPEEDR10 GPIO_OSPEEDR_OSPEEDR10
+#define GPIO_OSPEEDER_OSPEEDR10_0 GPIO_OSPEEDR_OSPEEDR10_0
+#define GPIO_OSPEEDER_OSPEEDR10_1 GPIO_OSPEEDR_OSPEEDR10_1
+#define GPIO_OSPEEDER_OSPEEDR11 GPIO_OSPEEDR_OSPEEDR11
+#define GPIO_OSPEEDER_OSPEEDR11_0 GPIO_OSPEEDR_OSPEEDR11_0
+#define GPIO_OSPEEDER_OSPEEDR11_1 GPIO_OSPEEDR_OSPEEDR11_1
+#define GPIO_OSPEEDER_OSPEEDR12 GPIO_OSPEEDR_OSPEEDR12
+#define GPIO_OSPEEDER_OSPEEDR12_0 GPIO_OSPEEDR_OSPEEDR12_0
+#define GPIO_OSPEEDER_OSPEEDR12_1 GPIO_OSPEEDR_OSPEEDR12_1
+#define GPIO_OSPEEDER_OSPEEDR13 GPIO_OSPEEDR_OSPEEDR13
+#define GPIO_OSPEEDER_OSPEEDR13_0 GPIO_OSPEEDR_OSPEEDR13_0
+#define GPIO_OSPEEDER_OSPEEDR13_1 GPIO_OSPEEDR_OSPEEDR13_1
+#define GPIO_OSPEEDER_OSPEEDR14 GPIO_OSPEEDR_OSPEEDR14
+#define GPIO_OSPEEDER_OSPEEDR14_0 GPIO_OSPEEDR_OSPEEDR14_0
+#define GPIO_OSPEEDER_OSPEEDR14_1 GPIO_OSPEEDR_OSPEEDR14_1
+#define GPIO_OSPEEDER_OSPEEDR15 GPIO_OSPEEDR_OSPEEDR15
+#define GPIO_OSPEEDER_OSPEEDR15_0 GPIO_OSPEEDR_OSPEEDR15_0
+#define GPIO_OSPEEDER_OSPEEDR15_1 GPIO_OSPEEDR_OSPEEDR15_1
+
+/******************* Bit definition for GPIO_PUPDR register ******************/
+#define GPIO_PUPDR_PUPDR0 ((uint32_t)0x00000003)
+#define GPIO_PUPDR_PUPDR0_0 ((uint32_t)0x00000001)
+#define GPIO_PUPDR_PUPDR0_1 ((uint32_t)0x00000002)
+#define GPIO_PUPDR_PUPDR1 ((uint32_t)0x0000000C)
+#define GPIO_PUPDR_PUPDR1_0 ((uint32_t)0x00000004)
+#define GPIO_PUPDR_PUPDR1_1 ((uint32_t)0x00000008)
+#define GPIO_PUPDR_PUPDR2 ((uint32_t)0x00000030)
+#define GPIO_PUPDR_PUPDR2_0 ((uint32_t)0x00000010)
+#define GPIO_PUPDR_PUPDR2_1 ((uint32_t)0x00000020)
+#define GPIO_PUPDR_PUPDR3 ((uint32_t)0x000000C0)
+#define GPIO_PUPDR_PUPDR3_0 ((uint32_t)0x00000040)
+#define GPIO_PUPDR_PUPDR3_1 ((uint32_t)0x00000080)
+#define GPIO_PUPDR_PUPDR4 ((uint32_t)0x00000300)
+#define GPIO_PUPDR_PUPDR4_0 ((uint32_t)0x00000100)
+#define GPIO_PUPDR_PUPDR4_1 ((uint32_t)0x00000200)
+#define GPIO_PUPDR_PUPDR5 ((uint32_t)0x00000C00)
+#define GPIO_PUPDR_PUPDR5_0 ((uint32_t)0x00000400)
+#define GPIO_PUPDR_PUPDR5_1 ((uint32_t)0x00000800)
+#define GPIO_PUPDR_PUPDR6 ((uint32_t)0x00003000)
+#define GPIO_PUPDR_PUPDR6_0 ((uint32_t)0x00001000)
+#define GPIO_PUPDR_PUPDR6_1 ((uint32_t)0x00002000)
+#define GPIO_PUPDR_PUPDR7 ((uint32_t)0x0000C000)
+#define GPIO_PUPDR_PUPDR7_0 ((uint32_t)0x00004000)
+#define GPIO_PUPDR_PUPDR7_1 ((uint32_t)0x00008000)
+#define GPIO_PUPDR_PUPDR8 ((uint32_t)0x00030000)
+#define GPIO_PUPDR_PUPDR8_0 ((uint32_t)0x00010000)
+#define GPIO_PUPDR_PUPDR8_1 ((uint32_t)0x00020000)
+#define GPIO_PUPDR_PUPDR9 ((uint32_t)0x000C0000)
+#define GPIO_PUPDR_PUPDR9_0 ((uint32_t)0x00040000)
+#define GPIO_PUPDR_PUPDR9_1 ((uint32_t)0x00080000)
+#define GPIO_PUPDR_PUPDR10 ((uint32_t)0x00300000)
+#define GPIO_PUPDR_PUPDR10_0 ((uint32_t)0x00100000)
+#define GPIO_PUPDR_PUPDR10_1 ((uint32_t)0x00200000)
+#define GPIO_PUPDR_PUPDR11 ((uint32_t)0x00C00000)
+#define GPIO_PUPDR_PUPDR11_0 ((uint32_t)0x00400000)
+#define GPIO_PUPDR_PUPDR11_1 ((uint32_t)0x00800000)
+#define GPIO_PUPDR_PUPDR12 ((uint32_t)0x03000000)
+#define GPIO_PUPDR_PUPDR12_0 ((uint32_t)0x01000000)
+#define GPIO_PUPDR_PUPDR12_1 ((uint32_t)0x02000000)
+#define GPIO_PUPDR_PUPDR13 ((uint32_t)0x0C000000)
+#define GPIO_PUPDR_PUPDR13_0 ((uint32_t)0x04000000)
+#define GPIO_PUPDR_PUPDR13_1 ((uint32_t)0x08000000)
+#define GPIO_PUPDR_PUPDR14 ((uint32_t)0x30000000)
+#define GPIO_PUPDR_PUPDR14_0 ((uint32_t)0x10000000)
+#define GPIO_PUPDR_PUPDR14_1 ((uint32_t)0x20000000)
+#define GPIO_PUPDR_PUPDR15 ((uint32_t)0xC0000000)
+#define GPIO_PUPDR_PUPDR15_0 ((uint32_t)0x40000000)
+#define GPIO_PUPDR_PUPDR15_1 ((uint32_t)0x80000000)
+
+/******************* Bit definition for GPIO_IDR register *******************/
+#define GPIO_IDR_0 ((uint32_t)0x00000001)
+#define GPIO_IDR_1 ((uint32_t)0x00000002)
+#define GPIO_IDR_2 ((uint32_t)0x00000004)
+#define GPIO_IDR_3 ((uint32_t)0x00000008)
+#define GPIO_IDR_4 ((uint32_t)0x00000010)
+#define GPIO_IDR_5 ((uint32_t)0x00000020)
+#define GPIO_IDR_6 ((uint32_t)0x00000040)
+#define GPIO_IDR_7 ((uint32_t)0x00000080)
+#define GPIO_IDR_8 ((uint32_t)0x00000100)
+#define GPIO_IDR_9 ((uint32_t)0x00000200)
+#define GPIO_IDR_10 ((uint32_t)0x00000400)
+#define GPIO_IDR_11 ((uint32_t)0x00000800)
+#define GPIO_IDR_12 ((uint32_t)0x00001000)
+#define GPIO_IDR_13 ((uint32_t)0x00002000)
+#define GPIO_IDR_14 ((uint32_t)0x00004000)
+#define GPIO_IDR_15 ((uint32_t)0x00008000)
+
+/****************** Bit definition for GPIO_ODR register ********************/
+#define GPIO_ODR_0 ((uint32_t)0x00000001)
+#define GPIO_ODR_1 ((uint32_t)0x00000002)
+#define GPIO_ODR_2 ((uint32_t)0x00000004)
+#define GPIO_ODR_3 ((uint32_t)0x00000008)
+#define GPIO_ODR_4 ((uint32_t)0x00000010)
+#define GPIO_ODR_5 ((uint32_t)0x00000020)
+#define GPIO_ODR_6 ((uint32_t)0x00000040)
+#define GPIO_ODR_7 ((uint32_t)0x00000080)
+#define GPIO_ODR_8 ((uint32_t)0x00000100)
+#define GPIO_ODR_9 ((uint32_t)0x00000200)
+#define GPIO_ODR_10 ((uint32_t)0x00000400)
+#define GPIO_ODR_11 ((uint32_t)0x00000800)
+#define GPIO_ODR_12 ((uint32_t)0x00001000)
+#define GPIO_ODR_13 ((uint32_t)0x00002000)
+#define GPIO_ODR_14 ((uint32_t)0x00004000)
+#define GPIO_ODR_15 ((uint32_t)0x00008000)
+
+/****************** Bit definition for GPIO_BSRR register ********************/
+#define GPIO_BSRR_BS_0 ((uint32_t)0x00000001)
+#define GPIO_BSRR_BS_1 ((uint32_t)0x00000002)
+#define GPIO_BSRR_BS_2 ((uint32_t)0x00000004)
+#define GPIO_BSRR_BS_3 ((uint32_t)0x00000008)
+#define GPIO_BSRR_BS_4 ((uint32_t)0x00000010)
+#define GPIO_BSRR_BS_5 ((uint32_t)0x00000020)
+#define GPIO_BSRR_BS_6 ((uint32_t)0x00000040)
+#define GPIO_BSRR_BS_7 ((uint32_t)0x00000080)
+#define GPIO_BSRR_BS_8 ((uint32_t)0x00000100)
+#define GPIO_BSRR_BS_9 ((uint32_t)0x00000200)
+#define GPIO_BSRR_BS_10 ((uint32_t)0x00000400)
+#define GPIO_BSRR_BS_11 ((uint32_t)0x00000800)
+#define GPIO_BSRR_BS_12 ((uint32_t)0x00001000)
+#define GPIO_BSRR_BS_13 ((uint32_t)0x00002000)
+#define GPIO_BSRR_BS_14 ((uint32_t)0x00004000)
+#define GPIO_BSRR_BS_15 ((uint32_t)0x00008000)
+#define GPIO_BSRR_BR_0 ((uint32_t)0x00010000)
+#define GPIO_BSRR_BR_1 ((uint32_t)0x00020000)
+#define GPIO_BSRR_BR_2 ((uint32_t)0x00040000)
+#define GPIO_BSRR_BR_3 ((uint32_t)0x00080000)
+#define GPIO_BSRR_BR_4 ((uint32_t)0x00100000)
+#define GPIO_BSRR_BR_5 ((uint32_t)0x00200000)
+#define GPIO_BSRR_BR_6 ((uint32_t)0x00400000)
+#define GPIO_BSRR_BR_7 ((uint32_t)0x00800000)
+#define GPIO_BSRR_BR_8 ((uint32_t)0x01000000)
+#define GPIO_BSRR_BR_9 ((uint32_t)0x02000000)
+#define GPIO_BSRR_BR_10 ((uint32_t)0x04000000)
+#define GPIO_BSRR_BR_11 ((uint32_t)0x08000000)
+#define GPIO_BSRR_BR_12 ((uint32_t)0x10000000)
+#define GPIO_BSRR_BR_13 ((uint32_t)0x20000000)
+#define GPIO_BSRR_BR_14 ((uint32_t)0x40000000)
+#define GPIO_BSRR_BR_15 ((uint32_t)0x80000000)
+
+/****************** Bit definition for GPIO_LCKR register ********************/
+#define GPIO_LCKR_LCK0 ((uint32_t)0x00000001)
+#define GPIO_LCKR_LCK1 ((uint32_t)0x00000002)
+#define GPIO_LCKR_LCK2 ((uint32_t)0x00000004)
+#define GPIO_LCKR_LCK3 ((uint32_t)0x00000008)
+#define GPIO_LCKR_LCK4 ((uint32_t)0x00000010)
+#define GPIO_LCKR_LCK5 ((uint32_t)0x00000020)
+#define GPIO_LCKR_LCK6 ((uint32_t)0x00000040)
+#define GPIO_LCKR_LCK7 ((uint32_t)0x00000080)
+#define GPIO_LCKR_LCK8 ((uint32_t)0x00000100)
+#define GPIO_LCKR_LCK9 ((uint32_t)0x00000200)
+#define GPIO_LCKR_LCK10 ((uint32_t)0x00000400)
+#define GPIO_LCKR_LCK11 ((uint32_t)0x00000800)
+#define GPIO_LCKR_LCK12 ((uint32_t)0x00001000)
+#define GPIO_LCKR_LCK13 ((uint32_t)0x00002000)
+#define GPIO_LCKR_LCK14 ((uint32_t)0x00004000)
+#define GPIO_LCKR_LCK15 ((uint32_t)0x00008000)
+#define GPIO_LCKR_LCKK ((uint32_t)0x00010000)
+
+/****************** Bit definition for GPIO_AFRL register ********************/
+#define GPIO_AFRL_AFRL0 ((uint32_t)0x0000000F)
+#define GPIO_AFRL_AFRL1 ((uint32_t)0x000000F0)
+#define GPIO_AFRL_AFRL2 ((uint32_t)0x00000F00)
+#define GPIO_AFRL_AFRL3 ((uint32_t)0x0000F000)
+#define GPIO_AFRL_AFRL4 ((uint32_t)0x000F0000)
+#define GPIO_AFRL_AFRL5 ((uint32_t)0x00F00000)
+#define GPIO_AFRL_AFRL6 ((uint32_t)0x0F000000)
+#define GPIO_AFRL_AFRL7 ((uint32_t)0xF0000000)
+
+/****************** Bit definition for GPIO_AFRH register ********************/
+#define GPIO_AFRH_AFRH0 ((uint32_t)0x0000000F)
+#define GPIO_AFRH_AFRH1 ((uint32_t)0x000000F0)
+#define GPIO_AFRH_AFRH2 ((uint32_t)0x00000F00)
+#define GPIO_AFRH_AFRH3 ((uint32_t)0x0000F000)
+#define GPIO_AFRH_AFRH4 ((uint32_t)0x000F0000)
+#define GPIO_AFRH_AFRH5 ((uint32_t)0x00F00000)
+#define GPIO_AFRH_AFRH6 ((uint32_t)0x0F000000)
+#define GPIO_AFRH_AFRH7 ((uint32_t)0xF0000000)
+
+/****************** Bit definition for GPIO_BRR register *********************/
+#define GPIO_BRR_BR_0 ((uint32_t)0x00000001)
+#define GPIO_BRR_BR_1 ((uint32_t)0x00000002)
+#define GPIO_BRR_BR_2 ((uint32_t)0x00000004)
+#define GPIO_BRR_BR_3 ((uint32_t)0x00000008)
+#define GPIO_BRR_BR_4 ((uint32_t)0x00000010)
+#define GPIO_BRR_BR_5 ((uint32_t)0x00000020)
+#define GPIO_BRR_BR_6 ((uint32_t)0x00000040)
+#define GPIO_BRR_BR_7 ((uint32_t)0x00000080)
+#define GPIO_BRR_BR_8 ((uint32_t)0x00000100)
+#define GPIO_BRR_BR_9 ((uint32_t)0x00000200)
+#define GPIO_BRR_BR_10 ((uint32_t)0x00000400)
+#define GPIO_BRR_BR_11 ((uint32_t)0x00000800)
+#define GPIO_BRR_BR_12 ((uint32_t)0x00001000)
+#define GPIO_BRR_BR_13 ((uint32_t)0x00002000)
+#define GPIO_BRR_BR_14 ((uint32_t)0x00004000)
+#define GPIO_BRR_BR_15 ((uint32_t)0x00008000)
+
+/******************************************************************************/
+/* */
+/* Inter-integrated Circuit Interface (I2C) */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for I2C_CR1 register *******************/
+#define I2C_CR1_PE ((uint32_t)0x00000001) /*!< Peripheral enable */
+#define I2C_CR1_TXIE ((uint32_t)0x00000002) /*!< TX interrupt enable */
+#define I2C_CR1_RXIE ((uint32_t)0x00000004) /*!< RX interrupt enable */
+#define I2C_CR1_ADDRIE ((uint32_t)0x00000008) /*!< Address match interrupt enable */
+#define I2C_CR1_NACKIE ((uint32_t)0x00000010) /*!< NACK received interrupt enable */
+#define I2C_CR1_STOPIE ((uint32_t)0x00000020) /*!< STOP detection interrupt enable */
+#define I2C_CR1_TCIE ((uint32_t)0x00000040) /*!< Transfer complete interrupt enable */
+#define I2C_CR1_ERRIE ((uint32_t)0x00000080) /*!< Errors interrupt enable */
+#define I2C_CR1_DFN ((uint32_t)0x00000F00) /*!< Digital noise filter */
+#define I2C_CR1_ANFOFF ((uint32_t)0x00001000) /*!< Analog noise filter OFF */
+#define I2C_CR1_SWRST ((uint32_t)0x00002000) /*!< Software reset */
+#define I2C_CR1_TXDMAEN ((uint32_t)0x00004000) /*!< DMA transmission requests enable */
+#define I2C_CR1_RXDMAEN ((uint32_t)0x00008000) /*!< DMA reception requests enable */
+#define I2C_CR1_SBC ((uint32_t)0x00010000) /*!< Slave byte control */
+#define I2C_CR1_NOSTRETCH ((uint32_t)0x00020000) /*!< Clock stretching disable */
+#define I2C_CR1_WUPEN ((uint32_t)0x00040000) /*!< Wakeup from STOP enable */
+#define I2C_CR1_GCEN ((uint32_t)0x00080000) /*!< General call enable */
+#define I2C_CR1_SMBHEN ((uint32_t)0x00100000) /*!< SMBus host address enable */
+#define I2C_CR1_SMBDEN ((uint32_t)0x00200000) /*!< SMBus device default address enable */
+#define I2C_CR1_ALERTEN ((uint32_t)0x00400000) /*!< SMBus alert enable */
+#define I2C_CR1_PECEN ((uint32_t)0x00800000) /*!< PEC enable */
+
+/****************** Bit definition for I2C_CR2 register ********************/
+#define I2C_CR2_SADD ((uint32_t)0x000003FF) /*!< Slave address (master mode) */
+#define I2C_CR2_RD_WRN ((uint32_t)0x00000400) /*!< Transfer direction (master mode) */
+#define I2C_CR2_ADD10 ((uint32_t)0x00000800) /*!< 10-bit addressing mode (master mode) */
+#define I2C_CR2_HEAD10R ((uint32_t)0x00001000) /*!< 10-bit address header only read direction (master mode) */
+#define I2C_CR2_START ((uint32_t)0x00002000) /*!< START generation */
+#define I2C_CR2_STOP ((uint32_t)0x00004000) /*!< STOP generation (master mode) */
+#define I2C_CR2_NACK ((uint32_t)0x00008000) /*!< NACK generation (slave mode) */
+#define I2C_CR2_NBYTES ((uint32_t)0x00FF0000) /*!< Number of bytes */
+#define I2C_CR2_RELOAD ((uint32_t)0x01000000) /*!< NBYTES reload mode */
+#define I2C_CR2_AUTOEND ((uint32_t)0x02000000) /*!< Automatic end mode (master mode) */
+#define I2C_CR2_PECBYTE ((uint32_t)0x04000000) /*!< Packet error checking byte */
+
+/******************* Bit definition for I2C_OAR1 register ******************/
+#define I2C_OAR1_OA1 ((uint32_t)0x000003FF) /*!< Interface own address 1 */
+#define I2C_OAR1_OA1MODE ((uint32_t)0x00000400) /*!< Own address 1 10-bit mode */
+#define I2C_OAR1_OA1EN ((uint32_t)0x00008000) /*!< Own address 1 enable */
+
+/******************* Bit definition for I2C_OAR2 register ******************/
+#define I2C_OAR2_OA2 ((uint32_t)0x000000FE) /*!< Interface own address 2 */
+#define I2C_OAR2_OA2MSK ((uint32_t)0x00000700) /*!< Own address 2 masks */
+#define I2C_OAR2_OA2EN ((uint32_t)0x00008000) /*!< Own address 2 enable */
+
+/******************* Bit definition for I2C_TIMINGR register ****************/
+#define I2C_TIMINGR_SCLL ((uint32_t)0x000000FF) /*!< SCL low period (master mode) */
+#define I2C_TIMINGR_SCLH ((uint32_t)0x0000FF00) /*!< SCL high period (master mode) */
+#define I2C_TIMINGR_SDADEL ((uint32_t)0x000F0000) /*!< Data hold time */
+#define I2C_TIMINGR_SCLDEL ((uint32_t)0x00F00000) /*!< Data setup time */
+#define I2C_TIMINGR_PRESC ((uint32_t)0xF0000000) /*!< Timings prescaler */
+
+/******************* Bit definition for I2C_TIMEOUTR register ****************/
+#define I2C_TIMEOUTR_TIMEOUTA ((uint32_t)0x00000FFF) /*!< Bus timeout A */
+#define I2C_TIMEOUTR_TIDLE ((uint32_t)0x00001000) /*!< Idle clock timeout detection */
+#define I2C_TIMEOUTR_TIMOUTEN ((uint32_t)0x00008000) /*!< Clock timeout enable */
+#define I2C_TIMEOUTR_TIMEOUTB ((uint32_t)0x0FFF0000) /*!< Bus timeout B*/
+#define I2C_TIMEOUTR_TEXTEN ((uint32_t)0x80000000) /*!< Extended clock timeout enable */
+
+/****************** Bit definition for I2C_ISR register ********************/
+#define I2C_ISR_TXE ((uint32_t)0x00000001) /*!< Transmit data register empty */
+#define I2C_ISR_TXIS ((uint32_t)0x00000002) /*!< Transmit interrupt status */
+#define I2C_ISR_RXNE ((uint32_t)0x00000004) /*!< Receive data register not empty */
+#define I2C_ISR_ADDR ((uint32_t)0x00000008) /*!< Address matched (slave mode)*/
+#define I2C_ISR_NACKF ((uint32_t)0x00000010) /*!< NACK received flag */
+#define I2C_ISR_STOPF ((uint32_t)0x00000020) /*!< STOP detection flag */
+#define I2C_ISR_TC ((uint32_t)0x00000040) /*!< Transfer complete (master mode) */
+#define I2C_ISR_TCR ((uint32_t)0x00000080) /*!< Transfer complete reload */
+#define I2C_ISR_BERR ((uint32_t)0x00000100) /*!< Bus error */
+#define I2C_ISR_ARLO ((uint32_t)0x00000200) /*!< Arbitration lost */
+#define I2C_ISR_OVR ((uint32_t)0x00000400) /*!< Overrun/Underrun */
+#define I2C_ISR_PECERR ((uint32_t)0x00000800) /*!< PEC error in reception */
+#define I2C_ISR_TIMEOUT ((uint32_t)0x00001000) /*!< Timeout or Tlow detection flag */
+#define I2C_ISR_ALERT ((uint32_t)0x00002000) /*!< SMBus alert */
+#define I2C_ISR_BUSY ((uint32_t)0x00008000) /*!< Bus busy */
+#define I2C_ISR_DIR ((uint32_t)0x00010000) /*!< Transfer direction (slave mode) */
+#define I2C_ISR_ADDCODE ((uint32_t)0x00FE0000) /*!< Address match code (slave mode) */
+
+/****************** Bit definition for I2C_ICR register ********************/
+#define I2C_ICR_ADDRCF ((uint32_t)0x00000008) /*!< Address matched clear flag */
+#define I2C_ICR_NACKCF ((uint32_t)0x00000010) /*!< NACK clear flag */
+#define I2C_ICR_STOPCF ((uint32_t)0x00000020) /*!< STOP detection clear flag */
+#define I2C_ICR_BERRCF ((uint32_t)0x00000100) /*!< Bus error clear flag */
+#define I2C_ICR_ARLOCF ((uint32_t)0x00000200) /*!< Arbitration lost clear flag */
+#define I2C_ICR_OVRCF ((uint32_t)0x00000400) /*!< Overrun/Underrun clear flag */
+#define I2C_ICR_PECCF ((uint32_t)0x00000800) /*!< PAC error clear flag */
+#define I2C_ICR_TIMOUTCF ((uint32_t)0x00001000) /*!< Timeout clear flag */
+#define I2C_ICR_ALERTCF ((uint32_t)0x00002000) /*!< Alert clear flag */
+
+/****************** Bit definition for I2C_PECR register *******************/
+#define I2C_PECR_PEC ((uint32_t)0x000000FF) /*!< PEC register */
+
+/****************** Bit definition for I2C_RXDR register *********************/
+#define I2C_RXDR_RXDATA ((uint32_t)0x000000FF) /*!< 8-bit receive data */
+
+/****************** Bit definition for I2C_TXDR register *******************/
+#define I2C_TXDR_TXDATA ((uint32_t)0x000000FF) /*!< 8-bit transmit data */
+
+/*****************************************************************************/
+/* */
+/* Independent WATCHDOG (IWDG) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for IWDG_KR register *******************/
+#define IWDG_KR_KEY ((uint32_t)0xFFFF) /*!< Key value (write only, read 0000h) */
+
+/******************* Bit definition for IWDG_PR register *******************/
+#define IWDG_PR_PR ((uint32_t)0x07) /*!< PR[2:0] (Prescaler divider) */
+#define IWDG_PR_PR_0 ((uint32_t)0x01) /*!< Bit 0 */
+#define IWDG_PR_PR_1 ((uint32_t)0x02) /*!< Bit 1 */
+#define IWDG_PR_PR_2 ((uint32_t)0x04) /*!< Bit 2 */
+
+/******************* Bit definition for IWDG_RLR register ******************/
+#define IWDG_RLR_RL ((uint32_t)0x0FFF) /*!< Watchdog counter reload value */
+
+/******************* Bit definition for IWDG_SR register *******************/
+#define IWDG_SR_PVU ((uint32_t)0x01) /*!< Watchdog prescaler value update */
+#define IWDG_SR_RVU ((uint32_t)0x02) /*!< Watchdog counter reload value update */
+#define IWDG_SR_WVU ((uint32_t)0x04) /*!< Watchdog counter window value update */
+
+/******************* Bit definition for IWDG_KR register *******************/
+#define IWDG_WINR_WIN ((uint32_t)0x0FFF) /*!< Watchdog counter window value */
+
+/*****************************************************************************/
+/* */
+/* Power Control (PWR) */
+/* */
+/*****************************************************************************/
+
+/******************** Bit definition for PWR_CR register *******************/
+#define PWR_CR_LPDS ((uint32_t)0x00000001) /*!< Low-power Deepsleep */
+#define PWR_CR_PDDS ((uint32_t)0x00000002) /*!< Power Down Deepsleep */
+#define PWR_CR_CWUF ((uint32_t)0x00000004) /*!< Clear Wakeup Flag */
+#define PWR_CR_CSBF ((uint32_t)0x00000008) /*!< Clear Standby Flag */
+#define PWR_CR_DBP ((uint32_t)0x00000100) /*!< Disable Backup Domain write protection */
+
+/******************* Bit definition for PWR_CSR register *******************/
+#define PWR_CSR_WUF ((uint32_t)0x00000001) /*!< Wakeup Flag */
+#define PWR_CSR_SBF ((uint32_t)0x00000002) /*!< Standby Flag */
+#define PWR_CSR_EWUP1 ((uint32_t)0x00000100) /*!< Enable WKUP pin 1 */
+#define PWR_CSR_EWUP2 ((uint32_t)0x00000200) /*!< Enable WKUP pin 2 */
+
+/*****************************************************************************/
+/* */
+/* Reset and Clock Control */
+/* */
+/*****************************************************************************/
+
+/******************** Bit definition for RCC_CR register *******************/
+#define RCC_CR_HSION ((uint32_t)0x00000001) /*!< Internal High Speed clock enable */
+#define RCC_CR_HSIRDY ((uint32_t)0x00000002) /*!< Internal High Speed clock ready flag */
+
+#define RCC_CR_HSITRIM ((uint32_t)0x000000F8) /*!< Internal High Speed clock trimming */
+#define RCC_CR_HSITRIM_0 ((uint32_t)0x00000008) /*!<Bit 0 */
+#define RCC_CR_HSITRIM_1 ((uint32_t)0x00000010) /*!<Bit 1 */
+#define RCC_CR_HSITRIM_2 ((uint32_t)0x00000020) /*!<Bit 2 */
+#define RCC_CR_HSITRIM_3 ((uint32_t)0x00000040) /*!<Bit 3 */
+#define RCC_CR_HSITRIM_4 ((uint32_t)0x00000080) /*!<Bit 4 */
+
+#define RCC_CR_HSICAL ((uint32_t)0x0000FF00) /*!< Internal High Speed clock Calibration */
+#define RCC_CR_HSICAL_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define RCC_CR_HSICAL_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define RCC_CR_HSICAL_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define RCC_CR_HSICAL_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define RCC_CR_HSICAL_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+#define RCC_CR_HSICAL_5 ((uint32_t)0x00002000) /*!<Bit 5 */
+#define RCC_CR_HSICAL_6 ((uint32_t)0x00004000) /*!<Bit 6 */
+#define RCC_CR_HSICAL_7 ((uint32_t)0x00008000) /*!<Bit 7 */
+
+#define RCC_CR_HSEON ((uint32_t)0x00010000) /*!< External High Speed clock enable */
+#define RCC_CR_HSERDY ((uint32_t)0x00020000) /*!< External High Speed clock ready flag */
+#define RCC_CR_HSEBYP ((uint32_t)0x00040000) /*!< External High Speed clock Bypass */
+#define RCC_CR_CSSON ((uint32_t)0x00080000) /*!< Clock Security System enable */
+#define RCC_CR_PLLON ((uint32_t)0x01000000) /*!< PLL enable */
+#define RCC_CR_PLLRDY ((uint32_t)0x02000000) /*!< PLL clock ready flag */
+
+/******************** Bit definition for RCC_CFGR register *****************/
+/*!< SW configuration */
+#define RCC_CFGR_SW ((uint32_t)0x00000003) /*!< SW[1:0] bits (System clock Switch) */
+#define RCC_CFGR_SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR_SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+#define RCC_CFGR_SW_HSI ((uint32_t)0x00000000) /*!< HSI selected as system clock */
+#define RCC_CFGR_SW_HSE ((uint32_t)0x00000001) /*!< HSE selected as system clock */
+#define RCC_CFGR_SW_PLL ((uint32_t)0x00000002) /*!< PLL selected as system clock */
+
+/*!< SWS configuration */
+#define RCC_CFGR_SWS ((uint32_t)0x0000000C) /*!< SWS[1:0] bits (System Clock Switch Status) */
+#define RCC_CFGR_SWS_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define RCC_CFGR_SWS_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+
+#define RCC_CFGR_SWS_HSI ((uint32_t)0x00000000) /*!< HSI oscillator used as system clock */
+#define RCC_CFGR_SWS_HSE ((uint32_t)0x00000004) /*!< HSE oscillator used as system clock */
+#define RCC_CFGR_SWS_PLL ((uint32_t)0x00000008) /*!< PLL used as system clock */
+
+/*!< HPRE configuration */
+#define RCC_CFGR_HPRE ((uint32_t)0x000000F0) /*!< HPRE[3:0] bits (AHB prescaler) */
+#define RCC_CFGR_HPRE_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define RCC_CFGR_HPRE_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define RCC_CFGR_HPRE_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+#define RCC_CFGR_HPRE_3 ((uint32_t)0x00000080) /*!< Bit 3 */
+
+#define RCC_CFGR_HPRE_DIV1 ((uint32_t)0x00000000) /*!< SYSCLK not divided */
+#define RCC_CFGR_HPRE_DIV2 ((uint32_t)0x00000080) /*!< SYSCLK divided by 2 */
+#define RCC_CFGR_HPRE_DIV4 ((uint32_t)0x00000090) /*!< SYSCLK divided by 4 */
+#define RCC_CFGR_HPRE_DIV8 ((uint32_t)0x000000A0) /*!< SYSCLK divided by 8 */
+#define RCC_CFGR_HPRE_DIV16 ((uint32_t)0x000000B0) /*!< SYSCLK divided by 16 */
+#define RCC_CFGR_HPRE_DIV64 ((uint32_t)0x000000C0) /*!< SYSCLK divided by 64 */
+#define RCC_CFGR_HPRE_DIV128 ((uint32_t)0x000000D0) /*!< SYSCLK divided by 128 */
+#define RCC_CFGR_HPRE_DIV256 ((uint32_t)0x000000E0) /*!< SYSCLK divided by 256 */
+#define RCC_CFGR_HPRE_DIV512 ((uint32_t)0x000000F0) /*!< SYSCLK divided by 512 */
+
+/*!< PPRE configuration */
+#define RCC_CFGR_PPRE ((uint32_t)0x00000700) /*!< PRE[2:0] bits (APB prescaler) */
+#define RCC_CFGR_PPRE_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define RCC_CFGR_PPRE_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define RCC_CFGR_PPRE_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+
+#define RCC_CFGR_PPRE_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */
+#define RCC_CFGR_PPRE_DIV2 ((uint32_t)0x00000400) /*!< HCLK divided by 2 */
+#define RCC_CFGR_PPRE_DIV4 ((uint32_t)0x00000500) /*!< HCLK divided by 4 */
+#define RCC_CFGR_PPRE_DIV8 ((uint32_t)0x00000600) /*!< HCLK divided by 8 */
+#define RCC_CFGR_PPRE_DIV16 ((uint32_t)0x00000700) /*!< HCLK divided by 16 */
+
+/*!< ADCPPRE configuration */
+#define RCC_CFGR_ADCPRE ((uint32_t)0x00004000) /*!< ADCPRE bit (ADC prescaler) */
+
+#define RCC_CFGR_ADCPRE_DIV2 ((uint32_t)0x00000000) /*!< PCLK divided by 2 */
+#define RCC_CFGR_ADCPRE_DIV4 ((uint32_t)0x00004000) /*!< PCLK divided by 4 */
+
+#define RCC_CFGR_PLLSRC ((uint32_t)0x00010000) /*!< PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSI_DIV2 ((uint32_t)0x00000000) /*!< HSI clock divided by 2 selected as PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSE_PREDIV ((uint32_t)0x00010000) /*!< HSE/PREDIV clock selected as PLL entry clock source */
+
+#define RCC_CFGR_PLLXTPRE ((uint32_t)0x00020000) /*!< HSE divider for PLL entry */
+#define RCC_CFGR_PLLXTPRE_HSE_PREDIV_DIV1 ((uint32_t)0x00000000) /*!< HSE/PREDIV clock not divided for PLL entry */
+#define RCC_CFGR_PLLXTPRE_HSE_PREDIV_DIV2 ((uint32_t)0x00020000) /*!< HSE/PREDIV clock divided by 2 for PLL entry */
+
+/*!< PLLMUL configuration */
+#define RCC_CFGR_PLLMUL ((uint32_t)0x003C0000) /*!< PLLMUL[3:0] bits (PLL multiplication factor) */
+#define RCC_CFGR_PLLMUL_0 ((uint32_t)0x00040000) /*!< Bit 0 */
+#define RCC_CFGR_PLLMUL_1 ((uint32_t)0x00080000) /*!< Bit 1 */
+#define RCC_CFGR_PLLMUL_2 ((uint32_t)0x00100000) /*!< Bit 2 */
+#define RCC_CFGR_PLLMUL_3 ((uint32_t)0x00200000) /*!< Bit 3 */
+
+#define RCC_CFGR_PLLMUL2 ((uint32_t)0x00000000) /*!< PLL input clock*2 */
+#define RCC_CFGR_PLLMUL3 ((uint32_t)0x00040000) /*!< PLL input clock*3 */
+#define RCC_CFGR_PLLMUL4 ((uint32_t)0x00080000) /*!< PLL input clock*4 */
+#define RCC_CFGR_PLLMUL5 ((uint32_t)0x000C0000) /*!< PLL input clock*5 */
+#define RCC_CFGR_PLLMUL6 ((uint32_t)0x00100000) /*!< PLL input clock*6 */
+#define RCC_CFGR_PLLMUL7 ((uint32_t)0x00140000) /*!< PLL input clock*7 */
+#define RCC_CFGR_PLLMUL8 ((uint32_t)0x00180000) /*!< PLL input clock*8 */
+#define RCC_CFGR_PLLMUL9 ((uint32_t)0x001C0000) /*!< PLL input clock*9 */
+#define RCC_CFGR_PLLMUL10 ((uint32_t)0x00200000) /*!< PLL input clock10 */
+#define RCC_CFGR_PLLMUL11 ((uint32_t)0x00240000) /*!< PLL input clock*11 */
+#define RCC_CFGR_PLLMUL12 ((uint32_t)0x00280000) /*!< PLL input clock*12 */
+#define RCC_CFGR_PLLMUL13 ((uint32_t)0x002C0000) /*!< PLL input clock*13 */
+#define RCC_CFGR_PLLMUL14 ((uint32_t)0x00300000) /*!< PLL input clock*14 */
+#define RCC_CFGR_PLLMUL15 ((uint32_t)0x00340000) /*!< PLL input clock*15 */
+#define RCC_CFGR_PLLMUL16 ((uint32_t)0x00380000) /*!< PLL input clock*16 */
+
+/*!< MCO configuration */
+#define RCC_CFGR_MCO ((uint32_t)0x0F000000) /*!< MCO[3:0] bits (Microcontroller Clock Output) */
+#define RCC_CFGR_MCO_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define RCC_CFGR_MCO_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define RCC_CFGR_MCO_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+#define RCC_CFGR_MCO_3 ((uint32_t)0x08000000) /*!< Bit 3 */
+
+#define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
+#define RCC_CFGR_MCO_HSI14 ((uint32_t)0x01000000) /*!< HSI14 clock selected as MCO source */
+#define RCC_CFGR_MCO_LSI ((uint32_t)0x02000000) /*!< LSI clock selected as MCO source */
+#define RCC_CFGR_MCO_LSE ((uint32_t)0x03000000) /*!< LSE clock selected as MCO source */
+#define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x04000000) /*!< System clock selected as MCO source */
+#define RCC_CFGR_MCO_HSI ((uint32_t)0x05000000) /*!< HSI clock selected as MCO source */
+#define RCC_CFGR_MCO_HSE ((uint32_t)0x06000000) /*!< HSE clock selected as MCO source */
+#define RCC_CFGR_MCO_PLL ((uint32_t)0x07000000) /*!< PLL clock divided by 2 selected as MCO source */
+
+#define RCC_CFGR_MCOPRE ((uint32_t)0x70000000) /*!< MCO prescaler */
+#define RCC_CFGR_MCOPRE_DIV1 ((uint32_t)0x00000000) /*!< MCO is divided by 1 */
+#define RCC_CFGR_MCOPRE_DIV2 ((uint32_t)0x10000000) /*!< MCO is divided by 2 */
+#define RCC_CFGR_MCOPRE_DIV4 ((uint32_t)0x20000000) /*!< MCO is divided by 4 */
+#define RCC_CFGR_MCOPRE_DIV8 ((uint32_t)0x30000000) /*!< MCO is divided by 8 */
+#define RCC_CFGR_MCOPRE_DIV16 ((uint32_t)0x40000000) /*!< MCO is divided by 16 */
+#define RCC_CFGR_MCOPRE_DIV32 ((uint32_t)0x50000000) /*!< MCO is divided by 32 */
+#define RCC_CFGR_MCOPRE_DIV64 ((uint32_t)0x60000000) /*!< MCO is divided by 64 */
+#define RCC_CFGR_MCOPRE_DIV128 ((uint32_t)0x70000000) /*!< MCO is divided by 128 */
+
+#define RCC_CFGR_PLLNODIV ((uint32_t)0x80000000) /*!< PLL is not divided to MCO */
+
+/*!<****************** Bit definition for RCC_CIR register *****************/
+#define RCC_CIR_LSIRDYF ((uint32_t)0x00000001) /*!< LSI Ready Interrupt flag */
+#define RCC_CIR_LSERDYF ((uint32_t)0x00000002) /*!< LSE Ready Interrupt flag */
+#define RCC_CIR_HSIRDYF ((uint32_t)0x00000004) /*!< HSI Ready Interrupt flag */
+#define RCC_CIR_HSERDYF ((uint32_t)0x00000008) /*!< HSE Ready Interrupt flag */
+#define RCC_CIR_PLLRDYF ((uint32_t)0x00000010) /*!< PLL Ready Interrupt flag */
+#define RCC_CIR_HSI14RDYF ((uint32_t)0x00000020) /*!< HSI14 Ready Interrupt flag */
+#define RCC_CIR_CSSF ((uint32_t)0x00000080) /*!< Clock Security System Interrupt flag */
+#define RCC_CIR_LSIRDYIE ((uint32_t)0x00000100) /*!< LSI Ready Interrupt Enable */
+#define RCC_CIR_LSERDYIE ((uint32_t)0x00000200) /*!< LSE Ready Interrupt Enable */
+#define RCC_CIR_HSIRDYIE ((uint32_t)0x00000400) /*!< HSI Ready Interrupt Enable */
+#define RCC_CIR_HSERDYIE ((uint32_t)0x00000800) /*!< HSE Ready Interrupt Enable */
+#define RCC_CIR_PLLRDYIE ((uint32_t)0x00001000) /*!< PLL Ready Interrupt Enable */
+#define RCC_CIR_HSI14RDYIE ((uint32_t)0x00002000) /*!< HSI14 Ready Interrupt Enable */
+#define RCC_CIR_LSIRDYC ((uint32_t)0x00010000) /*!< LSI Ready Interrupt Clear */
+#define RCC_CIR_LSERDYC ((uint32_t)0x00020000) /*!< LSE Ready Interrupt Clear */
+#define RCC_CIR_HSIRDYC ((uint32_t)0x00040000) /*!< HSI Ready Interrupt Clear */
+#define RCC_CIR_HSERDYC ((uint32_t)0x00080000) /*!< HSE Ready Interrupt Clear */
+#define RCC_CIR_PLLRDYC ((uint32_t)0x00100000) /*!< PLL Ready Interrupt Clear */
+#define RCC_CIR_HSI14RDYC ((uint32_t)0x00200000) /*!< HSI14 Ready Interrupt Clear */
+#define RCC_CIR_CSSC ((uint32_t)0x00800000) /*!< Clock Security System Interrupt Clear */
+
+/***************** Bit definition for RCC_APB2RSTR register ****************/
+#define RCC_APB2RSTR_SYSCFGRST ((uint32_t)0x00000001) /*!< SYSCFG clock reset */
+#define RCC_APB2RSTR_ADCRST ((uint32_t)0x00000200) /*!< ADC clock reset */
+#define RCC_APB2RSTR_TIM1RST ((uint32_t)0x00000800) /*!< TIM1 clock reset */
+#define RCC_APB2RSTR_SPI1RST ((uint32_t)0x00001000) /*!< SPI1 clock reset */
+#define RCC_APB2RSTR_USART1RST ((uint32_t)0x00004000) /*!< USART1 clock reset */
+#define RCC_APB2RSTR_TIM16RST ((uint32_t)0x00020000) /*!< TIM16 clock reset */
+#define RCC_APB2RSTR_TIM17RST ((uint32_t)0x00040000) /*!< TIM17 clock reset */
+#define RCC_APB2RSTR_DBGMCURST ((uint32_t)0x00400000) /*!< DBGMCU clock reset */
+
+/*!< Old ADC1 clock reset bit definition maintained for legacy purpose */
+#define RCC_APB2RSTR_ADC1RST RCC_APB2RSTR_ADCRST
+
+/***************** Bit definition for RCC_APB1RSTR register ****************/
+#define RCC_APB1RSTR_TIM3RST ((uint32_t)0x00000002) /*!< Timer 3 clock reset */
+#define RCC_APB1RSTR_TIM14RST ((uint32_t)0x00000100) /*!< Timer 14 clock reset */
+#define RCC_APB1RSTR_WWDGRST ((uint32_t)0x00000800) /*!< Window Watchdog clock reset */
+#define RCC_APB1RSTR_I2C1RST ((uint32_t)0x00200000) /*!< I2C 1 clock reset */
+#define RCC_APB1RSTR_PWRRST ((uint32_t)0x10000000) /*!< PWR clock reset */
+
+/****************** Bit definition for RCC_AHBENR register *****************/
+#define RCC_AHBENR_DMAEN ((uint32_t)0x00000001) /*!< DMA1 clock enable */
+#define RCC_AHBENR_SRAMEN ((uint32_t)0x00000004) /*!< SRAM interface clock enable */
+#define RCC_AHBENR_FLITFEN ((uint32_t)0x00000010) /*!< FLITF clock enable */
+#define RCC_AHBENR_CRCEN ((uint32_t)0x00000040) /*!< CRC clock enable */
+#define RCC_AHBENR_GPIOAEN ((uint32_t)0x00020000) /*!< GPIOA clock enable */
+#define RCC_AHBENR_GPIOBEN ((uint32_t)0x00040000) /*!< GPIOB clock enable */
+#define RCC_AHBENR_GPIOCEN ((uint32_t)0x00080000) /*!< GPIOC clock enable */
+#define RCC_AHBENR_GPIODEN ((uint32_t)0x00100000) /*!< GPIOD clock enable */
+#define RCC_AHBENR_GPIOFEN ((uint32_t)0x00400000) /*!< GPIOF clock enable */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_AHBENR_DMA1EN RCC_AHBENR_DMAEN /*!< DMA1 clock enable */
+#define RCC_AHBENR_TSEN RCC_AHBENR_TSCEN /*!< TS clock enable */
+
+/***************** Bit definition for RCC_APB2ENR register *****************/
+#define RCC_APB2ENR_SYSCFGCOMPEN ((uint32_t)0x00000001) /*!< SYSCFG and comparator clock enable */
+#define RCC_APB2ENR_ADCEN ((uint32_t)0x00000200) /*!< ADC1 clock enable */
+#define RCC_APB2ENR_TIM1EN ((uint32_t)0x00000800) /*!< TIM1 clock enable */
+#define RCC_APB2ENR_SPI1EN ((uint32_t)0x00001000) /*!< SPI1 clock enable */
+#define RCC_APB2ENR_USART1EN ((uint32_t)0x00004000) /*!< USART1 clock enable */
+#define RCC_APB2ENR_TIM16EN ((uint32_t)0x00020000) /*!< TIM16 clock enable */
+#define RCC_APB2ENR_TIM17EN ((uint32_t)0x00040000) /*!< TIM17 clock enable */
+#define RCC_APB2ENR_DBGMCUEN ((uint32_t)0x00400000) /*!< DBGMCU clock enable */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_APB2ENR_SYSCFGEN RCC_APB2ENR_SYSCFGCOMPEN /*!< SYSCFG clock enable */
+#define RCC_APB2ENR_ADC1EN RCC_APB2ENR_ADCEN /*!< ADC1 clock enable */
+
+/***************** Bit definition for RCC_APB1ENR register *****************/
+#define RCC_APB1ENR_TIM3EN ((uint32_t)0x00000002) /*!< Timer 3 clock enable */
+#define RCC_APB1ENR_TIM14EN ((uint32_t)0x00000100) /*!< Timer 14 clock enable */
+#define RCC_APB1ENR_WWDGEN ((uint32_t)0x00000800) /*!< Window Watchdog clock enable */
+#define RCC_APB1ENR_I2C1EN ((uint32_t)0x00200000) /*!< I2C1 clock enable */
+#define RCC_APB1ENR_PWREN ((uint32_t)0x10000000) /*!< PWR clock enable */
+
+/******************* Bit definition for RCC_BDCR register ******************/
+#define RCC_BDCR_LSEON ((uint32_t)0x00000001) /*!< External Low Speed oscillator enable */
+#define RCC_BDCR_LSERDY ((uint32_t)0x00000002) /*!< External Low Speed oscillator Ready */
+#define RCC_BDCR_LSEBYP ((uint32_t)0x00000004) /*!< External Low Speed oscillator Bypass */
+
+#define RCC_BDCR_LSEDRV ((uint32_t)0x00000018) /*!< LSEDRV[1:0] bits (LSE Osc. drive capability) */
+#define RCC_BDCR_LSEDRV_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define RCC_BDCR_LSEDRV_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+
+#define RCC_BDCR_RTCSEL ((uint32_t)0x00000300) /*!< RTCSEL[1:0] bits (RTC clock source selection) */
+#define RCC_BDCR_RTCSEL_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define RCC_BDCR_RTCSEL_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+
+/*!< RTC configuration */
+#define RCC_BDCR_RTCSEL_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
+#define RCC_BDCR_RTCSEL_LSE ((uint32_t)0x00000100) /*!< LSE oscillator clock used as RTC clock */
+#define RCC_BDCR_RTCSEL_LSI ((uint32_t)0x00000200) /*!< LSI oscillator clock used as RTC clock */
+#define RCC_BDCR_RTCSEL_HSE ((uint32_t)0x00000300) /*!< HSE oscillator clock divided by 128 used as RTC clock */
+
+#define RCC_BDCR_RTCEN ((uint32_t)0x00008000) /*!< RTC clock enable */
+#define RCC_BDCR_BDRST ((uint32_t)0x00010000) /*!< Backup domain software reset */
+
+/******************* Bit definition for RCC_CSR register *******************/
+#define RCC_CSR_LSION ((uint32_t)0x00000001) /*!< Internal Low Speed oscillator enable */
+#define RCC_CSR_LSIRDY ((uint32_t)0x00000002) /*!< Internal Low Speed oscillator Ready */
+#define RCC_CSR_V18PWRRSTF ((uint32_t)0x00800000) /*!< V1.8 power domain reset flag */
+#define RCC_CSR_RMVF ((uint32_t)0x01000000) /*!< Remove reset flag */
+#define RCC_CSR_OBLRSTF ((uint32_t)0x02000000) /*!< OBL reset flag */
+#define RCC_CSR_PINRSTF ((uint32_t)0x04000000) /*!< PIN reset flag */
+#define RCC_CSR_PORRSTF ((uint32_t)0x08000000) /*!< POR/PDR reset flag */
+#define RCC_CSR_SFTRSTF ((uint32_t)0x10000000) /*!< Software Reset flag */
+#define RCC_CSR_IWDGRSTF ((uint32_t)0x20000000) /*!< Independent Watchdog reset flag */
+#define RCC_CSR_WWDGRSTF ((uint32_t)0x40000000) /*!< Window watchdog reset flag */
+#define RCC_CSR_LPWRRSTF ((uint32_t)0x80000000) /*!< Low-Power reset flag */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_CSR_OBL RCC_CSR_OBLRSTF /*!< OBL reset flag */
+
+/******************* Bit definition for RCC_AHBRSTR register ***************/
+#define RCC_AHBRSTR_GPIOARST ((uint32_t)0x00020000) /*!< GPIOA clock reset */
+#define RCC_AHBRSTR_GPIOBRST ((uint32_t)0x00040000) /*!< GPIOB clock reset */
+#define RCC_AHBRSTR_GPIOCRST ((uint32_t)0x00080000) /*!< GPIOC clock reset */
+#define RCC_AHBRSTR_GPIODRST ((uint32_t)0x00100000) /*!< GPIOD clock reset */
+#define RCC_AHBRSTR_GPIOFRST ((uint32_t)0x00400000) /*!< GPIOF clock reset */
+
+/******************* Bit definition for RCC_CFGR2 register *****************/
+/*!< PREDIV configuration */
+#define RCC_CFGR2_PREDIV ((uint32_t)0x0000000F) /*!< PREDIV[3:0] bits */
+#define RCC_CFGR2_PREDIV_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR2_PREDIV_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define RCC_CFGR2_PREDIV_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define RCC_CFGR2_PREDIV_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+
+#define RCC_CFGR2_PREDIV_DIV1 ((uint32_t)0x00000000) /*!< PREDIV input clock not divided */
+#define RCC_CFGR2_PREDIV_DIV2 ((uint32_t)0x00000001) /*!< PREDIV input clock divided by 2 */
+#define RCC_CFGR2_PREDIV_DIV3 ((uint32_t)0x00000002) /*!< PREDIV input clock divided by 3 */
+#define RCC_CFGR2_PREDIV_DIV4 ((uint32_t)0x00000003) /*!< PREDIV input clock divided by 4 */
+#define RCC_CFGR2_PREDIV_DIV5 ((uint32_t)0x00000004) /*!< PREDIV input clock divided by 5 */
+#define RCC_CFGR2_PREDIV_DIV6 ((uint32_t)0x00000005) /*!< PREDIV input clock divided by 6 */
+#define RCC_CFGR2_PREDIV_DIV7 ((uint32_t)0x00000006) /*!< PREDIV input clock divided by 7 */
+#define RCC_CFGR2_PREDIV_DIV8 ((uint32_t)0x00000007) /*!< PREDIV input clock divided by 8 */
+#define RCC_CFGR2_PREDIV_DIV9 ((uint32_t)0x00000008) /*!< PREDIV input clock divided by 9 */
+#define RCC_CFGR2_PREDIV_DIV10 ((uint32_t)0x00000009) /*!< PREDIV input clock divided by 10 */
+#define RCC_CFGR2_PREDIV_DIV11 ((uint32_t)0x0000000A) /*!< PREDIV input clock divided by 11 */
+#define RCC_CFGR2_PREDIV_DIV12 ((uint32_t)0x0000000B) /*!< PREDIV input clock divided by 12 */
+#define RCC_CFGR2_PREDIV_DIV13 ((uint32_t)0x0000000C) /*!< PREDIV input clock divided by 13 */
+#define RCC_CFGR2_PREDIV_DIV14 ((uint32_t)0x0000000D) /*!< PREDIV input clock divided by 14 */
+#define RCC_CFGR2_PREDIV_DIV15 ((uint32_t)0x0000000E) /*!< PREDIV input clock divided by 15 */
+#define RCC_CFGR2_PREDIV_DIV16 ((uint32_t)0x0000000F) /*!< PREDIV input clock divided by 16 */
+
+/******************* Bit definition for RCC_CFGR3 register *****************/
+/*!< USART1 Clock source selection */
+#define RCC_CFGR3_USART1SW ((uint32_t)0x00000003) /*!< USART1SW[1:0] bits */
+#define RCC_CFGR3_USART1SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR3_USART1SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+#define RCC_CFGR3_USART1SW_PCLK ((uint32_t)0x00000000) /*!< PCLK clock used as USART1 clock source */
+#define RCC_CFGR3_USART1SW_SYSCLK ((uint32_t)0x00000001) /*!< System clock selected as USART1 clock source */
+#define RCC_CFGR3_USART1SW_LSE ((uint32_t)0x00000002) /*!< LSE oscillator clock used as USART1 clock source */
+#define RCC_CFGR3_USART1SW_HSI ((uint32_t)0x00000003) /*!< HSI oscillator clock used as USART1 clock source */
+
+/*!< I2C1 Clock source selection */
+#define RCC_CFGR3_I2C1SW ((uint32_t)0x00000010) /*!< I2C1SW bits */
+
+#define RCC_CFGR3_I2C1SW_HSI ((uint32_t)0x00000000) /*!< HSI oscillator clock used as I2C1 clock source */
+#define RCC_CFGR3_I2C1SW_SYSCLK ((uint32_t)0x00000010) /*!< System clock selected as I2C1 clock source */
+
+/******************* Bit definition for RCC_CR2 register *******************/
+#define RCC_CR2_HSI14ON ((uint32_t)0x00000001) /*!< Internal High Speed 14MHz clock enable */
+#define RCC_CR2_HSI14RDY ((uint32_t)0x00000002) /*!< Internal High Speed 14MHz clock ready flag */
+#define RCC_CR2_HSI14DIS ((uint32_t)0x00000004) /*!< Internal High Speed 14MHz clock disable */
+#define RCC_CR2_HSI14TRIM ((uint32_t)0x000000F8) /*!< Internal High Speed 14MHz clock trimming */
+#define RCC_CR2_HSI14CAL ((uint32_t)0x0000FF00) /*!< Internal High Speed 14MHz clock Calibration */
+
+/*****************************************************************************/
+/* */
+/* Real-Time Clock (RTC) */
+/* */
+/*****************************************************************************/
+/******************** Bits definition for RTC_TR register ******************/
+#define RTC_TR_PM ((uint32_t)0x00400000)
+#define RTC_TR_HT ((uint32_t)0x00300000)
+#define RTC_TR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TR_HU ((uint32_t)0x000F0000)
+#define RTC_TR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TR_MNT ((uint32_t)0x00007000)
+#define RTC_TR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TR_MNU ((uint32_t)0x00000F00)
+#define RTC_TR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TR_ST ((uint32_t)0x00000070)
+#define RTC_TR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TR_SU ((uint32_t)0x0000000F)
+#define RTC_TR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_DR register ******************/
+#define RTC_DR_YT ((uint32_t)0x00F00000)
+#define RTC_DR_YT_0 ((uint32_t)0x00100000)
+#define RTC_DR_YT_1 ((uint32_t)0x00200000)
+#define RTC_DR_YT_2 ((uint32_t)0x00400000)
+#define RTC_DR_YT_3 ((uint32_t)0x00800000)
+#define RTC_DR_YU ((uint32_t)0x000F0000)
+#define RTC_DR_YU_0 ((uint32_t)0x00010000)
+#define RTC_DR_YU_1 ((uint32_t)0x00020000)
+#define RTC_DR_YU_2 ((uint32_t)0x00040000)
+#define RTC_DR_YU_3 ((uint32_t)0x00080000)
+#define RTC_DR_WDU ((uint32_t)0x0000E000)
+#define RTC_DR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_DR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_DR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_DR_MT ((uint32_t)0x00001000)
+#define RTC_DR_MU ((uint32_t)0x00000F00)
+#define RTC_DR_MU_0 ((uint32_t)0x00000100)
+#define RTC_DR_MU_1 ((uint32_t)0x00000200)
+#define RTC_DR_MU_2 ((uint32_t)0x00000400)
+#define RTC_DR_MU_3 ((uint32_t)0x00000800)
+#define RTC_DR_DT ((uint32_t)0x00000030)
+#define RTC_DR_DT_0 ((uint32_t)0x00000010)
+#define RTC_DR_DT_1 ((uint32_t)0x00000020)
+#define RTC_DR_DU ((uint32_t)0x0000000F)
+#define RTC_DR_DU_0 ((uint32_t)0x00000001)
+#define RTC_DR_DU_1 ((uint32_t)0x00000002)
+#define RTC_DR_DU_2 ((uint32_t)0x00000004)
+#define RTC_DR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_CR register ******************/
+#define RTC_CR_COE ((uint32_t)0x00800000)
+#define RTC_CR_OSEL ((uint32_t)0x00600000)
+#define RTC_CR_OSEL_0 ((uint32_t)0x00200000)
+#define RTC_CR_OSEL_1 ((uint32_t)0x00400000)
+#define RTC_CR_POL ((uint32_t)0x00100000)
+#define RTC_CR_COSEL ((uint32_t)0x00080000)
+#define RTC_CR_BCK ((uint32_t)0x00040000)
+#define RTC_CR_SUB1H ((uint32_t)0x00020000)
+#define RTC_CR_ADD1H ((uint32_t)0x00010000)
+#define RTC_CR_TSIE ((uint32_t)0x00008000)
+#define RTC_CR_ALRAIE ((uint32_t)0x00001000)
+#define RTC_CR_TSE ((uint32_t)0x00000800)
+#define RTC_CR_ALRAE ((uint32_t)0x00000100)
+#define RTC_CR_FMT ((uint32_t)0x00000040)
+#define RTC_CR_BYPSHAD ((uint32_t)0x00000020)
+#define RTC_CR_REFCKON ((uint32_t)0x00000010)
+#define RTC_CR_TSEDGE ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_ISR register *****************/
+#define RTC_ISR_RECALPF ((uint32_t)0x00010000)
+#define RTC_ISR_TAMP2F ((uint32_t)0x00004000)
+#define RTC_ISR_TAMP1F ((uint32_t)0x00002000)
+#define RTC_ISR_TSOVF ((uint32_t)0x00001000)
+#define RTC_ISR_TSF ((uint32_t)0x00000800)
+#define RTC_ISR_ALRAF ((uint32_t)0x00000100)
+#define RTC_ISR_INIT ((uint32_t)0x00000080)
+#define RTC_ISR_INITF ((uint32_t)0x00000040)
+#define RTC_ISR_RSF ((uint32_t)0x00000020)
+#define RTC_ISR_INITS ((uint32_t)0x00000010)
+#define RTC_ISR_SHPF ((uint32_t)0x00000008)
+#define RTC_ISR_ALRAWF ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_PRER register ****************/
+#define RTC_PRER_PREDIV_A ((uint32_t)0x007F0000)
+#define RTC_PRER_PREDIV_S ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_ALRMAR register **************/
+#define RTC_ALRMAR_MSK4 ((uint32_t)0x80000000)
+#define RTC_ALRMAR_WDSEL ((uint32_t)0x40000000)
+#define RTC_ALRMAR_DT ((uint32_t)0x30000000)
+#define RTC_ALRMAR_DT_0 ((uint32_t)0x10000000)
+#define RTC_ALRMAR_DT_1 ((uint32_t)0x20000000)
+#define RTC_ALRMAR_DU ((uint32_t)0x0F000000)
+#define RTC_ALRMAR_DU_0 ((uint32_t)0x01000000)
+#define RTC_ALRMAR_DU_1 ((uint32_t)0x02000000)
+#define RTC_ALRMAR_DU_2 ((uint32_t)0x04000000)
+#define RTC_ALRMAR_DU_3 ((uint32_t)0x08000000)
+#define RTC_ALRMAR_MSK3 ((uint32_t)0x00800000)
+#define RTC_ALRMAR_PM ((uint32_t)0x00400000)
+#define RTC_ALRMAR_HT ((uint32_t)0x00300000)
+#define RTC_ALRMAR_HT_0 ((uint32_t)0x00100000)
+#define RTC_ALRMAR_HT_1 ((uint32_t)0x00200000)
+#define RTC_ALRMAR_HU ((uint32_t)0x000F0000)
+#define RTC_ALRMAR_HU_0 ((uint32_t)0x00010000)
+#define RTC_ALRMAR_HU_1 ((uint32_t)0x00020000)
+#define RTC_ALRMAR_HU_2 ((uint32_t)0x00040000)
+#define RTC_ALRMAR_HU_3 ((uint32_t)0x00080000)
+#define RTC_ALRMAR_MSK2 ((uint32_t)0x00008000)
+#define RTC_ALRMAR_MNT ((uint32_t)0x00007000)
+#define RTC_ALRMAR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_ALRMAR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_ALRMAR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_ALRMAR_MNU ((uint32_t)0x00000F00)
+#define RTC_ALRMAR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_ALRMAR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_ALRMAR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_ALRMAR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_ALRMAR_MSK1 ((uint32_t)0x00000080)
+#define RTC_ALRMAR_ST ((uint32_t)0x00000070)
+#define RTC_ALRMAR_ST_0 ((uint32_t)0x00000010)
+#define RTC_ALRMAR_ST_1 ((uint32_t)0x00000020)
+#define RTC_ALRMAR_ST_2 ((uint32_t)0x00000040)
+#define RTC_ALRMAR_SU ((uint32_t)0x0000000F)
+#define RTC_ALRMAR_SU_0 ((uint32_t)0x00000001)
+#define RTC_ALRMAR_SU_1 ((uint32_t)0x00000002)
+#define RTC_ALRMAR_SU_2 ((uint32_t)0x00000004)
+#define RTC_ALRMAR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_WPR register *****************/
+#define RTC_WPR_KEY ((uint32_t)0x000000FF)
+
+/******************** Bits definition for RTC_SSR register *****************/
+#define RTC_SSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_SHIFTR register **************/
+#define RTC_SHIFTR_SUBFS ((uint32_t)0x00007FFF)
+#define RTC_SHIFTR_ADD1S ((uint32_t)0x80000000)
+
+/******************** Bits definition for RTC_TSTR register ****************/
+#define RTC_TSTR_PM ((uint32_t)0x00400000)
+#define RTC_TSTR_HT ((uint32_t)0x00300000)
+#define RTC_TSTR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TSTR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TSTR_HU ((uint32_t)0x000F0000)
+#define RTC_TSTR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TSTR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TSTR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TSTR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TSTR_MNT ((uint32_t)0x00007000)
+#define RTC_TSTR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TSTR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TSTR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TSTR_MNU ((uint32_t)0x00000F00)
+#define RTC_TSTR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TSTR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TSTR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TSTR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TSTR_ST ((uint32_t)0x00000070)
+#define RTC_TSTR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TSTR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TSTR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TSTR_SU ((uint32_t)0x0000000F)
+#define RTC_TSTR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TSTR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TSTR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TSTR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSDR register ****************/
+#define RTC_TSDR_WDU ((uint32_t)0x0000E000)
+#define RTC_TSDR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_TSDR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_TSDR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_TSDR_MT ((uint32_t)0x00001000)
+#define RTC_TSDR_MU ((uint32_t)0x00000F00)
+#define RTC_TSDR_MU_0 ((uint32_t)0x00000100)
+#define RTC_TSDR_MU_1 ((uint32_t)0x00000200)
+#define RTC_TSDR_MU_2 ((uint32_t)0x00000400)
+#define RTC_TSDR_MU_3 ((uint32_t)0x00000800)
+#define RTC_TSDR_DT ((uint32_t)0x00000030)
+#define RTC_TSDR_DT_0 ((uint32_t)0x00000010)
+#define RTC_TSDR_DT_1 ((uint32_t)0x00000020)
+#define RTC_TSDR_DU ((uint32_t)0x0000000F)
+#define RTC_TSDR_DU_0 ((uint32_t)0x00000001)
+#define RTC_TSDR_DU_1 ((uint32_t)0x00000002)
+#define RTC_TSDR_DU_2 ((uint32_t)0x00000004)
+#define RTC_TSDR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSSSR register ***************/
+#define RTC_TSSSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_CALR register ****************/
+#define RTC_CALR_CALP ((uint32_t)0x00008000)
+#define RTC_CALR_CALW8 ((uint32_t)0x00004000)
+#define RTC_CALR_CALW16 ((uint32_t)0x00002000)
+#define RTC_CALR_CALM ((uint32_t)0x000001FF)
+#define RTC_CALR_CALM_0 ((uint32_t)0x00000001)
+#define RTC_CALR_CALM_1 ((uint32_t)0x00000002)
+#define RTC_CALR_CALM_2 ((uint32_t)0x00000004)
+#define RTC_CALR_CALM_3 ((uint32_t)0x00000008)
+#define RTC_CALR_CALM_4 ((uint32_t)0x00000010)
+#define RTC_CALR_CALM_5 ((uint32_t)0x00000020)
+#define RTC_CALR_CALM_6 ((uint32_t)0x00000040)
+#define RTC_CALR_CALM_7 ((uint32_t)0x00000080)
+#define RTC_CALR_CALM_8 ((uint32_t)0x00000100)
+
+/******************** Bits definition for RTC_TAFCR register ***************/
+#define RTC_TAFCR_ALARMOUTTYPE ((uint32_t)0x00040000)
+#define RTC_TAFCR_TAMPPUDIS ((uint32_t)0x00008000)
+#define RTC_TAFCR_TAMPPRCH ((uint32_t)0x00006000)
+#define RTC_TAFCR_TAMPPRCH_0 ((uint32_t)0x00002000)
+#define RTC_TAFCR_TAMPPRCH_1 ((uint32_t)0x00004000)
+#define RTC_TAFCR_TAMPFLT ((uint32_t)0x00001800)
+#define RTC_TAFCR_TAMPFLT_0 ((uint32_t)0x00000800)
+#define RTC_TAFCR_TAMPFLT_1 ((uint32_t)0x00001000)
+#define RTC_TAFCR_TAMPFREQ ((uint32_t)0x00000700)
+#define RTC_TAFCR_TAMPFREQ_0 ((uint32_t)0x00000100)
+#define RTC_TAFCR_TAMPFREQ_1 ((uint32_t)0x00000200)
+#define RTC_TAFCR_TAMPFREQ_2 ((uint32_t)0x00000400)
+#define RTC_TAFCR_TAMPTS ((uint32_t)0x00000080)
+#define RTC_TAFCR_TAMP2TRG ((uint32_t)0x00000010)
+#define RTC_TAFCR_TAMP2E ((uint32_t)0x00000008)
+#define RTC_TAFCR_TAMPIE ((uint32_t)0x00000004)
+#define RTC_TAFCR_TAMP1TRG ((uint32_t)0x00000002)
+#define RTC_TAFCR_TAMP1E ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_ALRMASSR register ************/
+#define RTC_ALRMASSR_MASKSS ((uint32_t)0x0F000000)
+#define RTC_ALRMASSR_MASKSS_0 ((uint32_t)0x01000000)
+#define RTC_ALRMASSR_MASKSS_1 ((uint32_t)0x02000000)
+#define RTC_ALRMASSR_MASKSS_2 ((uint32_t)0x04000000)
+#define RTC_ALRMASSR_MASKSS_3 ((uint32_t)0x08000000)
+#define RTC_ALRMASSR_SS ((uint32_t)0x00007FFF)
+
+/*****************************************************************************/
+/* */
+/* Serial Peripheral Interface (SPI) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for SPI_CR1 register *******************/
+#define SPI_CR1_CPHA ((uint32_t)0x00000001) /*!< Clock Phase */
+#define SPI_CR1_CPOL ((uint32_t)0x00000002) /*!< Clock Polarity */
+#define SPI_CR1_MSTR ((uint32_t)0x00000004) /*!< Master Selection */
+#define SPI_CR1_BR ((uint32_t)0x00000038) /*!< BR[2:0] bits (Baud Rate Control) */
+#define SPI_CR1_BR_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define SPI_CR1_BR_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define SPI_CR1_BR_2 ((uint32_t)0x00000020) /*!< Bit 2 */
+#define SPI_CR1_SPE ((uint32_t)0x00000040) /*!< SPI Enable */
+#define SPI_CR1_LSBFIRST ((uint32_t)0x00000080) /*!< Frame Format */
+#define SPI_CR1_SSI ((uint32_t)0x00000100) /*!< Internal slave select */
+#define SPI_CR1_SSM ((uint32_t)0x00000200) /*!< Software slave management */
+#define SPI_CR1_RXONLY ((uint32_t)0x00000400) /*!< Receive only */
+#define SPI_CR1_CRCL ((uint32_t)0x00000800) /*!< CRC Length */
+#define SPI_CR1_CRCNEXT ((uint32_t)0x00001000) /*!< Transmit CRC next */
+#define SPI_CR1_CRCEN ((uint32_t)0x00002000) /*!< Hardware CRC calculation enable */
+#define SPI_CR1_BIDIOE ((uint32_t)0x00004000) /*!< Output enable in bidirectional mode */
+#define SPI_CR1_BIDIMODE ((uint32_t)0x00008000) /*!< Bidirectional data mode enable */
+
+/******************* Bit definition for SPI_CR2 register *******************/
+#define SPI_CR2_RXDMAEN ((uint32_t)0x00000001) /*!< Rx Buffer DMA Enable */
+#define SPI_CR2_TXDMAEN ((uint32_t)0x00000002) /*!< Tx Buffer DMA Enable */
+#define SPI_CR2_SSOE ((uint32_t)0x00000004) /*!< SS Output Enable */
+#define SPI_CR2_NSSP ((uint32_t)0x00000008) /*!< NSS pulse management Enable */
+#define SPI_CR2_FRF ((uint32_t)0x00000010) /*!< Frame Format Enable */
+#define SPI_CR2_ERRIE ((uint32_t)0x00000020) /*!< Error Interrupt Enable */
+#define SPI_CR2_RXNEIE ((uint32_t)0x00000040) /*!< RX buffer Not Empty Interrupt Enable */
+#define SPI_CR2_TXEIE ((uint32_t)0x00000080) /*!< Tx buffer Empty Interrupt Enable */
+#define SPI_CR2_DS ((uint32_t)0x00000F00) /*!< DS[3:0] Data Size */
+#define SPI_CR2_DS_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define SPI_CR2_DS_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define SPI_CR2_DS_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define SPI_CR2_DS_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+#define SPI_CR2_FRXTH ((uint32_t)0x00001000) /*!< FIFO reception Threshold */
+#define SPI_CR2_LDMARX ((uint32_t)0x00002000) /*!< Last DMA transfer for reception */
+#define SPI_CR2_LDMATX ((uint32_t)0x00004000) /*!< Last DMA transfer for transmission */
+
+/******************** Bit definition for SPI_SR register *******************/
+#define SPI_SR_RXNE ((uint32_t)0x00000001) /*!< Receive buffer Not Empty */
+#define SPI_SR_TXE ((uint32_t)0x00000002) /*!< Transmit buffer Empty */
+#define SPI_SR_CHSIDE ((uint32_t)0x00000004) /*!< Channel side */
+#define SPI_SR_UDR ((uint32_t)0x00000008) /*!< Underrun flag */
+#define SPI_SR_CRCERR ((uint32_t)0x00000010) /*!< CRC Error flag */
+#define SPI_SR_MODF ((uint32_t)0x00000020) /*!< Mode fault */
+#define SPI_SR_OVR ((uint32_t)0x00000040) /*!< Overrun flag */
+#define SPI_SR_BSY ((uint32_t)0x00000080) /*!< Busy flag */
+#define SPI_SR_FRE ((uint32_t)0x00000100) /*!< TI frame format error */
+#define SPI_SR_FRLVL ((uint32_t)0x00000600) /*!< FIFO Reception Level */
+#define SPI_SR_FRLVL_0 ((uint32_t)0x00000200) /*!< Bit 0 */
+#define SPI_SR_FRLVL_1 ((uint32_t)0x00000400) /*!< Bit 1 */
+#define SPI_SR_FTLVL ((uint32_t)0x00001800) /*!< FIFO Transmission Level */
+#define SPI_SR_FTLVL_0 ((uint32_t)0x00000800) /*!< Bit 0 */
+#define SPI_SR_FTLVL_1 ((uint32_t)0x00001000) /*!< Bit 1 */
+
+/******************** Bit definition for SPI_DR register *******************/
+#define SPI_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data Register */
+
+/******************* Bit definition for SPI_CRCPR register *****************/
+#define SPI_CRCPR_CRCPOLY ((uint32_t)0xFFFFFFFF) /*!< CRC polynomial register */
+
+/****************** Bit definition for SPI_RXCRCR register *****************/
+#define SPI_RXCRCR_RXCRC ((uint32_t)0xFFFFFFFF) /*!< Rx CRC Register */
+
+/****************** Bit definition for SPI_TXCRCR register *****************/
+#define SPI_TXCRCR_TXCRC ((uint32_t)0xFFFFFFFF) /*!< Tx CRC Register */
+
+/****************** Bit definition for SPI_I2SCFGR register ****************/
+#define SPI_I2SCFGR_CHLEN ((uint32_t)0x00000001) /*!<Channel length (number of bits per audio channel) */
+#define SPI_I2SCFGR_DATLEN ((uint32_t)0x00000006) /*!<DATLEN[1:0] bits (Data length to be transferred) */
+#define SPI_I2SCFGR_DATLEN_0 ((uint32_t)0x00000002) /*!<Bit 0 */
+#define SPI_I2SCFGR_DATLEN_1 ((uint32_t)0x00000004) /*!<Bit 1 */
+#define SPI_I2SCFGR_CKPOL ((uint32_t)0x00000008) /*!<steady state clock polarity */
+#define SPI_I2SCFGR_I2SSTD ((uint32_t)0x00000030) /*!<I2SSTD[1:0] bits (I2S standard selection) */
+#define SPI_I2SCFGR_I2SSTD_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SSTD_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define SPI_I2SCFGR_PCMSYNC ((uint32_t)0x00000080) /*!<PCM frame synchronization */
+#define SPI_I2SCFGR_I2SCFG ((uint32_t)0x00000300) /*!<I2SCFG[1:0] bits (I2S configuration mode) */
+#define SPI_I2SCFGR_I2SCFG_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SCFG_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define SPI_I2SCFGR_I2SE ((uint32_t)0x00000400) /*!<I2S Enable */
+#define SPI_I2SCFGR_I2SMOD ((uint32_t)0x00000800) /*!<I2S mode selection */
+
+/****************** Bit definition for SPI_I2SPR register ******************/
+#define SPI_I2SPR_I2SDIV ((uint32_t)0x000000FF) /*!<I2S Linear prescaler */
+#define SPI_I2SPR_ODD ((uint32_t)0x00000100) /*!<Odd factor for the prescaler */
+#define SPI_I2SPR_MCKOE ((uint32_t)0x00000200) /*!<Master Clock Output Enable */
+
+/*****************************************************************************/
+/* */
+/* System Configuration (SYSCFG) */
+/* */
+/*****************************************************************************/
+/***************** Bit definition for SYSCFG_CFGR1 register ****************/
+#define SYSCFG_CFGR1_MEM_MODE ((uint32_t)0x00000003) /*!< SYSCFG_Memory Remap Config */
+#define SYSCFG_CFGR1_MEM_MODE_0 ((uint32_t)0x00000001) /*!< SYSCFG_Memory Remap Config Bit 0 */
+#define SYSCFG_CFGR1_MEM_MODE_1 ((uint32_t)0x00000002) /*!< SYSCFG_Memory Remap Config Bit 1 */
+
+#define SYSCFG_CFGR1_DMA_RMP ((uint32_t)0x00001F00) /*!< DMA remap mask */
+#define SYSCFG_CFGR1_ADC_DMA_RMP ((uint32_t)0x00000100) /*!< ADC DMA remap */
+#define SYSCFG_CFGR1_USART1TX_DMA_RMP ((uint32_t)0x00000200) /*!< USART1 TX DMA remap */
+#define SYSCFG_CFGR1_USART1RX_DMA_RMP ((uint32_t)0x00000400) /*!< USART1 RX DMA remap */
+#define SYSCFG_CFGR1_TIM16_DMA_RMP ((uint32_t)0x00000800) /*!< Timer 16 DMA remap */
+#define SYSCFG_CFGR1_TIM17_DMA_RMP ((uint32_t)0x00001000) /*!< Timer 17 DMA remap */
+
+#define SYSCFG_CFGR1_I2C_FMP_PB6 ((uint32_t)0x00010000) /*!< I2C PB6 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB7 ((uint32_t)0x00020000) /*!< I2C PB7 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB8 ((uint32_t)0x00040000) /*!< I2C PB8 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB9 ((uint32_t)0x00080000) /*!< I2C PB9 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_I2C1 ((uint32_t)0x00100000) /*!< Enable Fast Mode Plus on PB10, PB11, PF6 and PF7 */
+#define SYSCFG_CFGR1_I2C_FMP_PA9 ((uint32_t)0x00400000) /*!< Enable Fast Mode Plus on PA9 */
+#define SYSCFG_CFGR1_I2C_FMP_PA10 ((uint32_t)0x00800000) /*!< Enable Fast Mode Plus on PA10 */
+
+/***************** Bit definition for SYSCFG_EXTICR1 register **************/
+#define SYSCFG_EXTICR1_EXTI0 ((uint16_t)0x000F) /*!< EXTI 0 configuration */
+#define SYSCFG_EXTICR1_EXTI1 ((uint16_t)0x00F0) /*!< EXTI 1 configuration */
+#define SYSCFG_EXTICR1_EXTI2 ((uint16_t)0x0F00) /*!< EXTI 2 configuration */
+#define SYSCFG_EXTICR1_EXTI3 ((uint16_t)0xF000) /*!< EXTI 3 configuration */
+
+/**
+ * @brief EXTI0 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI0_PA ((uint16_t)0x0000) /*!< PA[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PB ((uint16_t)0x0001) /*!< PB[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PC ((uint16_t)0x0002) /*!< PC[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PD ((uint16_t)0x0003) /*!< PD[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PF ((uint16_t)0x0005) /*!< PF[0] pin */
+
+/**
+ * @brief EXTI1 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI1_PA ((uint16_t)0x0000) /*!< PA[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PB ((uint16_t)0x0010) /*!< PB[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PC ((uint16_t)0x0020) /*!< PC[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PD ((uint16_t)0x0030) /*!< PD[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PF ((uint16_t)0x0050) /*!< PF[1] pin */
+
+/**
+ * @brief EXTI2 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI2_PA ((uint16_t)0x0000) /*!< PA[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PB ((uint16_t)0x0100) /*!< PB[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PC ((uint16_t)0x0200) /*!< PC[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PD ((uint16_t)0x0300) /*!< PD[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PF ((uint16_t)0x0500) /*!< PF[2] pin */
+
+/**
+ * @brief EXTI3 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI3_PA ((uint16_t)0x0000) /*!< PA[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PB ((uint16_t)0x1000) /*!< PB[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PC ((uint16_t)0x2000) /*!< PC[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PD ((uint16_t)0x3000) /*!< PD[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PF ((uint16_t)0x5000) /*!< PF[3] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR2 register **************/
+#define SYSCFG_EXTICR2_EXTI4 ((uint16_t)0x000F) /*!< EXTI 4 configuration */
+#define SYSCFG_EXTICR2_EXTI5 ((uint16_t)0x00F0) /*!< EXTI 5 configuration */
+#define SYSCFG_EXTICR2_EXTI6 ((uint16_t)0x0F00) /*!< EXTI 6 configuration */
+#define SYSCFG_EXTICR2_EXTI7 ((uint16_t)0xF000) /*!< EXTI 7 configuration */
+
+/**
+ * @brief EXTI4 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI4_PA ((uint16_t)0x0000) /*!< PA[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PB ((uint16_t)0x0001) /*!< PB[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PC ((uint16_t)0x0002) /*!< PC[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PD ((uint16_t)0x0003) /*!< PD[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PF ((uint16_t)0x0005) /*!< PF[4] pin */
+
+/**
+ * @brief EXTI5 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI5_PA ((uint16_t)0x0000) /*!< PA[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PB ((uint16_t)0x0010) /*!< PB[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PC ((uint16_t)0x0020) /*!< PC[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PD ((uint16_t)0x0030) /*!< PD[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PF ((uint16_t)0x0050) /*!< PF[5] pin */
+
+/**
+ * @brief EXTI6 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI6_PA ((uint16_t)0x0000) /*!< PA[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PB ((uint16_t)0x0100) /*!< PB[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PC ((uint16_t)0x0200) /*!< PC[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PD ((uint16_t)0x0300) /*!< PD[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PF ((uint16_t)0x0500) /*!< PF[6] pin */
+
+/**
+ * @brief EXTI7 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI7_PA ((uint16_t)0x0000) /*!< PA[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PB ((uint16_t)0x1000) /*!< PB[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PC ((uint16_t)0x2000) /*!< PC[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PD ((uint16_t)0x3000) /*!< PD[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PF ((uint16_t)0x5000) /*!< PF[7] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR3 register **************/
+#define SYSCFG_EXTICR3_EXTI8 ((uint16_t)0x000F) /*!< EXTI 8 configuration */
+#define SYSCFG_EXTICR3_EXTI9 ((uint16_t)0x00F0) /*!< EXTI 9 configuration */
+#define SYSCFG_EXTICR3_EXTI10 ((uint16_t)0x0F00) /*!< EXTI 10 configuration */
+#define SYSCFG_EXTICR3_EXTI11 ((uint16_t)0xF000) /*!< EXTI 11 configuration */
+
+/**
+ * @brief EXTI8 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI8_PA ((uint16_t)0x0000) /*!< PA[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PB ((uint16_t)0x0001) /*!< PB[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PC ((uint16_t)0x0002) /*!< PC[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PD ((uint16_t)0x0003) /*!< PD[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PF ((uint16_t)0x0005) /*!< PF[8] pin */
+
+/**
+ * @brief EXTI9 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI9_PA ((uint16_t)0x0000) /*!< PA[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PB ((uint16_t)0x0010) /*!< PB[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PC ((uint16_t)0x0020) /*!< PC[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PD ((uint16_t)0x0030) /*!< PD[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PF ((uint16_t)0x0050) /*!< PF[9] pin */
+
+/**
+ * @brief EXTI10 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI10_PA ((uint16_t)0x0000) /*!< PA[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PB ((uint16_t)0x0100) /*!< PB[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PC ((uint16_t)0x0200) /*!< PC[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PD ((uint16_t)0x0300) /*!< PD[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PF ((uint16_t)0x0500) /*!< PF[10] pin */
+
+/**
+ * @brief EXTI11 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI11_PA ((uint16_t)0x0000) /*!< PA[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PB ((uint16_t)0x1000) /*!< PB[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PC ((uint16_t)0x2000) /*!< PC[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PD ((uint16_t)0x3000) /*!< PD[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PF ((uint16_t)0x5000) /*!< PF[11] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR4 register **************/
+#define SYSCFG_EXTICR4_EXTI12 ((uint16_t)0x000F) /*!< EXTI 12 configuration */
+#define SYSCFG_EXTICR4_EXTI13 ((uint16_t)0x00F0) /*!< EXTI 13 configuration */
+#define SYSCFG_EXTICR4_EXTI14 ((uint16_t)0x0F00) /*!< EXTI 14 configuration */
+#define SYSCFG_EXTICR4_EXTI15 ((uint16_t)0xF000) /*!< EXTI 15 configuration */
+
+/**
+ * @brief EXTI12 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI12_PA ((uint16_t)0x0000) /*!< PA[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PB ((uint16_t)0x0001) /*!< PB[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PC ((uint16_t)0x0002) /*!< PC[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PD ((uint16_t)0x0003) /*!< PD[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PF ((uint16_t)0x0005) /*!< PF[12] pin */
+
+/**
+ * @brief EXTI13 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI13_PA ((uint16_t)0x0000) /*!< PA[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PB ((uint16_t)0x0010) /*!< PB[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PC ((uint16_t)0x0020) /*!< PC[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PD ((uint16_t)0x0030) /*!< PD[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PF ((uint16_t)0x0050) /*!< PF[13] pin */
+
+/**
+ * @brief EXTI14 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI14_PA ((uint16_t)0x0000) /*!< PA[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PB ((uint16_t)0x0100) /*!< PB[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PC ((uint16_t)0x0200) /*!< PC[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PD ((uint16_t)0x0300) /*!< PD[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PF ((uint16_t)0x0500) /*!< PF[14] pin */
+
+/**
+ * @brief EXTI15 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI15_PA ((uint16_t)0x0000) /*!< PA[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PB ((uint16_t)0x1000) /*!< PB[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PC ((uint16_t)0x2000) /*!< PC[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PD ((uint16_t)0x3000) /*!< PD[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PF ((uint16_t)0x5000) /*!< PF[15] pin */
+
+/***************** Bit definition for SYSCFG_CFGR2 register ****************/
+#define SYSCFG_CFGR2_LOCKUP_LOCK ((uint32_t)0x00000001) /*!< Enables and locks the LOCKUP (Hardfault) output of CortexM0 with Break Input of TIMER1 */
+#define SYSCFG_CFGR2_SRAM_PARITY_LOCK ((uint32_t)0x00000002) /*!< Enables and locks the SRAM_PARITY error signal with Break Input of TIMER1 */
+#define SYSCFG_CFGR2_SRAM_PEF ((uint32_t)0x00000100) /*!< SRAM Parity error flag */
+#define SYSCFG_CFGR2_SRAM_PE SYSCFG_CFGR2_SRAM_PEF /*!< SRAM Parity error flag (define maintained for legacy purpose) */
+
+/*****************************************************************************/
+/* */
+/* Timers (TIM) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for TIM_CR1 register *******************/
+#define TIM_CR1_CEN ((uint32_t)0x00000001) /*!<Counter enable */
+#define TIM_CR1_UDIS ((uint32_t)0x00000002) /*!<Update disable */
+#define TIM_CR1_URS ((uint32_t)0x00000004) /*!<Update request source */
+#define TIM_CR1_OPM ((uint32_t)0x00000008) /*!<One pulse mode */
+#define TIM_CR1_DIR ((uint32_t)0x00000010) /*!<Direction */
+
+#define TIM_CR1_CMS ((uint32_t)0x00000060) /*!<CMS[1:0] bits (Center-aligned mode selection) */
+#define TIM_CR1_CMS_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define TIM_CR1_CMS_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+
+#define TIM_CR1_ARPE ((uint32_t)0x00000080) /*!<Auto-reload preload enable */
+
+#define TIM_CR1_CKD ((uint32_t)0x00000300) /*!<CKD[1:0] bits (clock division) */
+#define TIM_CR1_CKD_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CR1_CKD_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+/******************* Bit definition for TIM_CR2 register *******************/
+#define TIM_CR2_CCPC ((uint32_t)0x00000001) /*!<Capture/Compare Preloaded Control */
+#define TIM_CR2_CCUS ((uint32_t)0x00000004) /*!<Capture/Compare Control Update Selection */
+#define TIM_CR2_CCDS ((uint32_t)0x00000008) /*!<Capture/Compare DMA Selection */
+
+#define TIM_CR2_MMS ((uint32_t)0x00000070) /*!<MMS[2:0] bits (Master Mode Selection) */
+#define TIM_CR2_MMS_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CR2_MMS_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CR2_MMS_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CR2_TI1S ((uint32_t)0x00000080) /*!<TI1 Selection */
+#define TIM_CR2_OIS1 ((uint32_t)0x00000100) /*!<Output Idle state 1 (OC1 output) */
+#define TIM_CR2_OIS1N ((uint32_t)0x00000200) /*!<Output Idle state 1 (OC1N output) */
+#define TIM_CR2_OIS2 ((uint32_t)0x00000400) /*!<Output Idle state 2 (OC2 output) */
+#define TIM_CR2_OIS2N ((uint32_t)0x00000800) /*!<Output Idle state 2 (OC2N output) */
+#define TIM_CR2_OIS3 ((uint32_t)0x00001000) /*!<Output Idle state 3 (OC3 output) */
+#define TIM_CR2_OIS3N ((uint32_t)0x00002000) /*!<Output Idle state 3 (OC3N output) */
+#define TIM_CR2_OIS4 ((uint32_t)0x00004000) /*!<Output Idle state 4 (OC4 output) */
+
+/******************* Bit definition for TIM_SMCR register ******************/
+#define TIM_SMCR_SMS ((uint32_t)0x00000007) /*!<SMS[2:0] bits (Slave mode selection) */
+#define TIM_SMCR_SMS_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_SMCR_SMS_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_SMCR_SMS_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+
+#define TIM_SMCR_OCCS ((uint32_t)0x00000008) /*!< OCREF clear selection */
+
+#define TIM_SMCR_TS ((uint32_t)0x00000070) /*!<TS[2:0] bits (Trigger selection) */
+#define TIM_SMCR_TS_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_SMCR_TS_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_SMCR_TS_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_SMCR_MSM ((uint32_t)0x00000080) /*!<Master/slave mode */
+
+#define TIM_SMCR_ETF ((uint32_t)0x00000F00) /*!<ETF[3:0] bits (External trigger filter) */
+#define TIM_SMCR_ETF_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_SMCR_ETF_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define TIM_SMCR_ETF_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define TIM_SMCR_ETF_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+
+#define TIM_SMCR_ETPS ((uint32_t)0x00003000) /*!<ETPS[1:0] bits (External trigger prescaler) */
+#define TIM_SMCR_ETPS_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_SMCR_ETPS_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+
+#define TIM_SMCR_ECE ((uint32_t)0x00004000) /*!<External clock enable */
+#define TIM_SMCR_ETP ((uint32_t)0x00008000) /*!<External trigger polarity */
+
+/******************* Bit definition for TIM_DIER register ******************/
+#define TIM_DIER_UIE ((uint32_t)0x00000001) /*!<Update interrupt enable */
+#define TIM_DIER_CC1IE ((uint32_t)0x00000002) /*!<Capture/Compare 1 interrupt enable */
+#define TIM_DIER_CC2IE ((uint32_t)0x00000004) /*!<Capture/Compare 2 interrupt enable */
+#define TIM_DIER_CC3IE ((uint32_t)0x00000008) /*!<Capture/Compare 3 interrupt enable */
+#define TIM_DIER_CC4IE ((uint32_t)0x00000010) /*!<Capture/Compare 4 interrupt enable */
+#define TIM_DIER_COMIE ((uint32_t)0x00000020) /*!<COM interrupt enable */
+#define TIM_DIER_TIE ((uint32_t)0x00000040) /*!<Trigger interrupt enable */
+#define TIM_DIER_BIE ((uint32_t)0x00000080) /*!<Break interrupt enable */
+#define TIM_DIER_UDE ((uint32_t)0x00000100) /*!<Update DMA request enable */
+#define TIM_DIER_CC1DE ((uint32_t)0x00000200) /*!<Capture/Compare 1 DMA request enable */
+#define TIM_DIER_CC2DE ((uint32_t)0x00000400) /*!<Capture/Compare 2 DMA request enable */
+#define TIM_DIER_CC3DE ((uint32_t)0x00000800) /*!<Capture/Compare 3 DMA request enable */
+#define TIM_DIER_CC4DE ((uint32_t)0x00001000) /*!<Capture/Compare 4 DMA request enable */
+#define TIM_DIER_COMDE ((uint32_t)0x00002000) /*!<COM DMA request enable */
+#define TIM_DIER_TDE ((uint32_t)0x00004000) /*!<Trigger DMA request enable */
+
+/******************** Bit definition for TIM_SR register *******************/
+#define TIM_SR_UIF ((uint32_t)0x00000001) /*!<Update interrupt Flag */
+#define TIM_SR_CC1IF ((uint32_t)0x00000002) /*!<Capture/Compare 1 interrupt Flag */
+#define TIM_SR_CC2IF ((uint32_t)0x00000004) /*!<Capture/Compare 2 interrupt Flag */
+#define TIM_SR_CC3IF ((uint32_t)0x00000008) /*!<Capture/Compare 3 interrupt Flag */
+#define TIM_SR_CC4IF ((uint32_t)0x00000010) /*!<Capture/Compare 4 interrupt Flag */
+#define TIM_SR_COMIF ((uint32_t)0x00000020) /*!<COM interrupt Flag */
+#define TIM_SR_TIF ((uint32_t)0x00000040) /*!<Trigger interrupt Flag */
+#define TIM_SR_BIF ((uint32_t)0x00000080) /*!<Break interrupt Flag */
+#define TIM_SR_CC1OF ((uint32_t)0x00000200) /*!<Capture/Compare 1 Overcapture Flag */
+#define TIM_SR_CC2OF ((uint32_t)0x00000400) /*!<Capture/Compare 2 Overcapture Flag */
+#define TIM_SR_CC3OF ((uint32_t)0x00000800) /*!<Capture/Compare 3 Overcapture Flag */
+#define TIM_SR_CC4OF ((uint32_t)0x00001000) /*!<Capture/Compare 4 Overcapture Flag */
+
+/******************* Bit definition for TIM_EGR register *******************/
+#define TIM_EGR_UG ((uint32_t)0x00000001) /*!<Update Generation */
+#define TIM_EGR_CC1G ((uint32_t)0x00000002) /*!<Capture/Compare 1 Generation */
+#define TIM_EGR_CC2G ((uint32_t)0x00000004) /*!<Capture/Compare 2 Generation */
+#define TIM_EGR_CC3G ((uint32_t)0x00000008) /*!<Capture/Compare 3 Generation */
+#define TIM_EGR_CC4G ((uint32_t)0x00000010) /*!<Capture/Compare 4 Generation */
+#define TIM_EGR_COMG ((uint32_t)0x00000020) /*!<Capture/Compare Control Update Generation */
+#define TIM_EGR_TG ((uint32_t)0x00000040) /*!<Trigger Generation */
+#define TIM_EGR_BG ((uint32_t)0x00000080) /*!<Break Generation */
+
+/****************** Bit definition for TIM_CCMR1 register ******************/
+#define TIM_CCMR1_CC1S ((uint32_t)0x00000003) /*!<CC1S[1:0] bits (Capture/Compare 1 Selection) */
+#define TIM_CCMR1_CC1S_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_CCMR1_CC1S_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC1FE ((uint32_t)0x00000004) /*!<Output Compare 1 Fast enable */
+#define TIM_CCMR1_OC1PE ((uint32_t)0x00000008) /*!<Output Compare 1 Preload enable */
+
+#define TIM_CCMR1_OC1M ((uint32_t)0x00000070) /*!<OC1M[2:0] bits (Output Compare 1 Mode) */
+#define TIM_CCMR1_OC1M_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR1_OC1M_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR1_OC1M_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CCMR1_OC1CE ((uint32_t)0x00000080) /*!<Output Compare 1Clear Enable */
+
+#define TIM_CCMR1_CC2S ((uint32_t)0x00000300) /*!<CC2S[1:0] bits (Capture/Compare 2 Selection) */
+#define TIM_CCMR1_CC2S_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CCMR1_CC2S_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC2FE ((uint32_t)0x00000400) /*!<Output Compare 2 Fast enable */
+#define TIM_CCMR1_OC2PE ((uint32_t)0x00000800) /*!<Output Compare 2 Preload enable */
+
+#define TIM_CCMR1_OC2M ((uint32_t)0x00007000) /*!<OC2M[2:0] bits (Output Compare 2 Mode) */
+#define TIM_CCMR1_OC2M_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR1_OC2M_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR1_OC2M_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+
+#define TIM_CCMR1_OC2CE ((uint32_t)0x00008000) /*!<Output Compare 2 Clear Enable */
+
+/*---------------------------------------------------------------------------*/
+
+#define TIM_CCMR1_IC1PSC ((uint32_t)0x0000000C) /*!<IC1PSC[1:0] bits (Input Capture 1 Prescaler) */
+#define TIM_CCMR1_IC1PSC_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define TIM_CCMR1_IC1PSC_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC1F ((uint32_t)0x000000F0) /*!<IC1F[3:0] bits (Input Capture 1 Filter) */
+#define TIM_CCMR1_IC1F_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR1_IC1F_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR1_IC1F_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define TIM_CCMR1_IC1F_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define TIM_CCMR1_IC2PSC ((uint32_t)0x00000C00) /*!<IC2PSC[1:0] bits (Input Capture 2 Prescaler) */
+#define TIM_CCMR1_IC2PSC_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define TIM_CCMR1_IC2PSC_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC2F ((uint32_t)0x0000F000) /*!<IC2F[3:0] bits (Input Capture 2 Filter) */
+#define TIM_CCMR1_IC2F_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR1_IC2F_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR1_IC2F_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define TIM_CCMR1_IC2F_3 ((uint32_t)0x00008000) /*!<Bit 3 */
+
+/****************** Bit definition for TIM_CCMR2 register ******************/
+#define TIM_CCMR2_CC3S ((uint32_t)0x00000003) /*!<CC3S[1:0] bits (Capture/Compare 3 Selection) */
+#define TIM_CCMR2_CC3S_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_CCMR2_CC3S_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC3FE ((uint32_t)0x00000004) /*!<Output Compare 3 Fast enable */
+#define TIM_CCMR2_OC3PE ((uint32_t)0x00000008) /*!<Output Compare 3 Preload enable */
+
+#define TIM_CCMR2_OC3M ((uint32_t)0x00000070) /*!<OC3M[2:0] bits (Output Compare 3 Mode) */
+#define TIM_CCMR2_OC3M_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR2_OC3M_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR2_OC3M_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CCMR2_OC3CE ((uint32_t)0x00000080) /*!<Output Compare 3 Clear Enable */
+
+#define TIM_CCMR2_CC4S ((uint32_t)0x00000300) /*!<CC4S[1:0] bits (Capture/Compare 4 Selection) */
+#define TIM_CCMR2_CC4S_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CCMR2_CC4S_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC4FE ((uint32_t)0x00000400) /*!<Output Compare 4 Fast enable */
+#define TIM_CCMR2_OC4PE ((uint32_t)0x00000800) /*!<Output Compare 4 Preload enable */
+
+#define TIM_CCMR2_OC4M ((uint32_t)0x00007000) /*!<OC4M[2:0] bits (Output Compare 4 Mode) */
+#define TIM_CCMR2_OC4M_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR2_OC4M_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR2_OC4M_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+
+#define TIM_CCMR2_OC4CE ((uint32_t)0x00008000) /*!<Output Compare 4 Clear Enable */
+
+/*---------------------------------------------------------------------------*/
+
+#define TIM_CCMR2_IC3PSC ((uint32_t)0x0000000C) /*!<IC3PSC[1:0] bits (Input Capture 3 Prescaler) */
+#define TIM_CCMR2_IC3PSC_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define TIM_CCMR2_IC3PSC_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC3F ((uint32_t)0x000000F0) /*!<IC3F[3:0] bits (Input Capture 3 Filter) */
+#define TIM_CCMR2_IC3F_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR2_IC3F_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR2_IC3F_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define TIM_CCMR2_IC3F_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define TIM_CCMR2_IC4PSC ((uint32_t)0x00000C00) /*!<IC4PSC[1:0] bits (Input Capture 4 Prescaler) */
+#define TIM_CCMR2_IC4PSC_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define TIM_CCMR2_IC4PSC_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC4F ((uint32_t)0x0000F000) /*!<IC4F[3:0] bits (Input Capture 4 Filter) */
+#define TIM_CCMR2_IC4F_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR2_IC4F_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR2_IC4F_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define TIM_CCMR2_IC4F_3 ((uint32_t)0x00008000) /*!<Bit 3 */
+
+/******************* Bit definition for TIM_CCER register ******************/
+#define TIM_CCER_CC1E ((uint32_t)0x00000001) /*!<Capture/Compare 1 output enable */
+#define TIM_CCER_CC1P ((uint32_t)0x00000002) /*!<Capture/Compare 1 output Polarity */
+#define TIM_CCER_CC1NE ((uint32_t)0x00000004) /*!<Capture/Compare 1 Complementary output enable */
+#define TIM_CCER_CC1NP ((uint32_t)0x00000008) /*!<Capture/Compare 1 Complementary output Polarity */
+#define TIM_CCER_CC2E ((uint32_t)0x00000010) /*!<Capture/Compare 2 output enable */
+#define TIM_CCER_CC2P ((uint32_t)0x00000020) /*!<Capture/Compare 2 output Polarity */
+#define TIM_CCER_CC2NE ((uint32_t)0x00000040) /*!<Capture/Compare 2 Complementary output enable */
+#define TIM_CCER_CC2NP ((uint32_t)0x00000080) /*!<Capture/Compare 2 Complementary output Polarity */
+#define TIM_CCER_CC3E ((uint32_t)0x00000100) /*!<Capture/Compare 3 output enable */
+#define TIM_CCER_CC3P ((uint32_t)0x00000200) /*!<Capture/Compare 3 output Polarity */
+#define TIM_CCER_CC3NE ((uint32_t)0x00000400) /*!<Capture/Compare 3 Complementary output enable */
+#define TIM_CCER_CC3NP ((uint32_t)0x00000800) /*!<Capture/Compare 3 Complementary output Polarity */
+#define TIM_CCER_CC4E ((uint32_t)0x00001000) /*!<Capture/Compare 4 output enable */
+#define TIM_CCER_CC4P ((uint32_t)0x00002000) /*!<Capture/Compare 4 output Polarity */
+#define TIM_CCER_CC4NP ((uint32_t)0x00008000) /*!<Capture/Compare 4 Complementary output Polarity */
+
+/******************* Bit definition for TIM_CNT register *******************/
+#define TIM_CNT_CNT ((uint32_t)0xFFFFFFFF) /*!<Counter Value */
+
+/******************* Bit definition for TIM_PSC register *******************/
+#define TIM_PSC_PSC ((uint32_t)0x0000FFFF) /*!<Prescaler Value */
+
+/******************* Bit definition for TIM_ARR register *******************/
+#define TIM_ARR_ARR ((uint32_t)0xFFFFFFFF) /*!<actual auto-reload Value */
+
+/******************* Bit definition for TIM_RCR register *******************/
+#define TIM_RCR_REP ((uint32_t)0x000000FF) /*!<Repetition Counter Value */
+
+/******************* Bit definition for TIM_CCR1 register ******************/
+#define TIM_CCR1_CCR1 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 1 Value */
+
+/******************* Bit definition for TIM_CCR2 register ******************/
+#define TIM_CCR2_CCR2 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 2 Value */
+
+/******************* Bit definition for TIM_CCR3 register ******************/
+#define TIM_CCR3_CCR3 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 3 Value */
+
+/******************* Bit definition for TIM_CCR4 register ******************/
+#define TIM_CCR4_CCR4 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 4 Value */
+
+/******************* Bit definition for TIM_BDTR register ******************/
+#define TIM_BDTR_DTG ((uint32_t)0x000000FF) /*!<DTG[0:7] bits (Dead-Time Generator set-up) */
+#define TIM_BDTR_DTG_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_BDTR_DTG_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_BDTR_DTG_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define TIM_BDTR_DTG_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define TIM_BDTR_DTG_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define TIM_BDTR_DTG_5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define TIM_BDTR_DTG_6 ((uint32_t)0x00000040) /*!<Bit 6 */
+#define TIM_BDTR_DTG_7 ((uint32_t)0x00000080) /*!<Bit 7 */
+
+#define TIM_BDTR_LOCK ((uint32_t)0x00000300) /*!<LOCK[1:0] bits (Lock Configuration) */
+#define TIM_BDTR_LOCK_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_BDTR_LOCK_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_BDTR_OSSI ((uint32_t)0x00000400) /*!<Off-State Selection for Idle mode */
+#define TIM_BDTR_OSSR ((uint32_t)0x00000800) /*!<Off-State Selection for Run mode */
+#define TIM_BDTR_BKE ((uint32_t)0x00001000) /*!<Break enable */
+#define TIM_BDTR_BKP ((uint32_t)0x00002000) /*!<Break Polarity */
+#define TIM_BDTR_AOE ((uint32_t)0x00004000) /*!<Automatic Output enable */
+#define TIM_BDTR_MOE ((uint32_t)0x00008000) /*!<Main Output enable */
+
+/******************* Bit definition for TIM_DCR register *******************/
+#define TIM_DCR_DBA ((uint32_t)0x0000001F) /*!<DBA[4:0] bits (DMA Base Address) */
+#define TIM_DCR_DBA_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_DCR_DBA_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_DCR_DBA_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define TIM_DCR_DBA_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define TIM_DCR_DBA_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+
+#define TIM_DCR_DBL ((uint32_t)0x00001F00) /*!<DBL[4:0] bits (DMA Burst Length) */
+#define TIM_DCR_DBL_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_DCR_DBL_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define TIM_DCR_DBL_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define TIM_DCR_DBL_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define TIM_DCR_DBL_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+
+/******************* Bit definition for TIM_DMAR register ******************/
+#define TIM_DMAR_DMAB ((uint32_t)0x0000FFFF) /*!<DMA register for burst accesses */
+
+/******************* Bit definition for TIM14_OR register ********************/
+#define TIM14_OR_TI1_RMP ((uint32_t)0x00000003) /*!<TI1_RMP[1:0] bits (TIM14 Input 4 remap) */
+#define TIM14_OR_TI1_RMP_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM14_OR_TI1_RMP_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+
+/******************************************************************************/
+/* */
+/* Universal Synchronous Asynchronous Receiver Transmitter (USART) */
+/* */
+/******************************************************************************/
+/****************** Bit definition for USART_CR1 register *******************/
+#define USART_CR1_UE ((uint32_t)0x00000001) /*!< USART Enable */
+#define USART_CR1_UESM ((uint32_t)0x00000002) /*!< USART Enable in STOP Mode */
+#define USART_CR1_RE ((uint32_t)0x00000004) /*!< Receiver Enable */
+#define USART_CR1_TE ((uint32_t)0x00000008) /*!< Transmitter Enable */
+#define USART_CR1_IDLEIE ((uint32_t)0x00000010) /*!< IDLE Interrupt Enable */
+#define USART_CR1_RXNEIE ((uint32_t)0x00000020) /*!< RXNE Interrupt Enable */
+#define USART_CR1_TCIE ((uint32_t)0x00000040) /*!< Transmission Complete Interrupt Enable */
+#define USART_CR1_TXEIE ((uint32_t)0x00000080) /*!< TXE Interrupt Enable */
+#define USART_CR1_PEIE ((uint32_t)0x00000100) /*!< PE Interrupt Enable */
+#define USART_CR1_PS ((uint32_t)0x00000200) /*!< Parity Selection */
+#define USART_CR1_PCE ((uint32_t)0x00000400) /*!< Parity Control Enable */
+#define USART_CR1_WAKE ((uint32_t)0x00000800) /*!< Receiver Wakeup method */
+#define USART_CR1_M0 ((uint32_t)0x00001000) /*!< Word length bit 0 */
+#define USART_CR1_M ((uint32_t)0x00001000) /*!< SmartCard Length */
+#define USART_CR1_MME ((uint32_t)0x00002000) /*!< Mute Mode Enable */
+#define USART_CR1_CMIE ((uint32_t)0x00004000) /*!< Character match interrupt enable */
+#define USART_CR1_OVER8 ((uint32_t)0x00008000) /*!< Oversampling by 8-bit or 16-bit mode */
+#define USART_CR1_DEDT ((uint32_t)0x001F0000) /*!< DEDT[4:0] bits (Driver Enable Deassertion Time) */
+#define USART_CR1_DEDT_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define USART_CR1_DEDT_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define USART_CR1_DEDT_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define USART_CR1_DEDT_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+#define USART_CR1_DEDT_4 ((uint32_t)0x00100000) /*!< Bit 4 */
+#define USART_CR1_DEAT ((uint32_t)0x03E00000) /*!< DEAT[4:0] bits (Driver Enable Assertion Time) */
+#define USART_CR1_DEAT_0 ((uint32_t)0x00200000) /*!< Bit 0 */
+#define USART_CR1_DEAT_1 ((uint32_t)0x00400000) /*!< Bit 1 */
+#define USART_CR1_DEAT_2 ((uint32_t)0x00800000) /*!< Bit 2 */
+#define USART_CR1_DEAT_3 ((uint32_t)0x01000000) /*!< Bit 3 */
+#define USART_CR1_DEAT_4 ((uint32_t)0x02000000) /*!< Bit 4 */
+#define USART_CR1_RTOIE ((uint32_t)0x04000000) /*!< Receive Time Out interrupt enable */
+#define USART_CR1_EOBIE ((uint32_t)0x08000000) /*!< End of Block interrupt enable */
+
+/****************** Bit definition for USART_CR2 register *******************/
+#define USART_CR2_ADDM7 ((uint32_t)0x00000010) /*!< 7-bit or 4-bit Address Detection */
+#define USART_CR2_LBDL ((uint32_t)0x00000020) /*!< LIN Break Detection Length */
+#define USART_CR2_LBDIE ((uint32_t)0x00000040) /*!< LIN Break Detection Interrupt Enable */
+#define USART_CR2_LBCL ((uint32_t)0x00000100) /*!< Last Bit Clock pulse */
+#define USART_CR2_CPHA ((uint32_t)0x00000200) /*!< Clock Phase */
+#define USART_CR2_CPOL ((uint32_t)0x00000400) /*!< Clock Polarity */
+#define USART_CR2_CLKEN ((uint32_t)0x00000800) /*!< Clock Enable */
+#define USART_CR2_STOP ((uint32_t)0x00003000) /*!< STOP[1:0] bits (STOP bits) */
+#define USART_CR2_STOP_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define USART_CR2_STOP_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+#define USART_CR2_LINEN ((uint32_t)0x00004000) /*!< LIN mode enable */
+#define USART_CR2_SWAP ((uint32_t)0x00008000) /*!< SWAP TX/RX pins */
+#define USART_CR2_RXINV ((uint32_t)0x00010000) /*!< RX pin active level inversion */
+#define USART_CR2_TXINV ((uint32_t)0x00020000) /*!< TX pin active level inversion */
+#define USART_CR2_DATAINV ((uint32_t)0x00040000) /*!< Binary data inversion */
+#define USART_CR2_MSBFIRST ((uint32_t)0x00080000) /*!< Most Significant Bit First */
+#define USART_CR2_ABREN ((uint32_t)0x00100000) /*!< Auto Baud-Rate Enable*/
+#define USART_CR2_ABRMODE ((uint32_t)0x00600000) /*!< ABRMOD[1:0] bits (Auto Baud-Rate Mode) */
+#define USART_CR2_ABRMODE_0 ((uint32_t)0x00200000) /*!< Bit 0 */
+#define USART_CR2_ABRMODE_1 ((uint32_t)0x00400000) /*!< Bit 1 */
+#define USART_CR2_RTOEN ((uint32_t)0x00800000) /*!< Receiver Time-Out enable */
+#define USART_CR2_ADD ((uint32_t)0xFF000000) /*!< Address of the USART node */
+
+/****************** Bit definition for USART_CR3 register *******************/
+#define USART_CR3_EIE ((uint32_t)0x00000001) /*!< Error Interrupt Enable */
+#define USART_CR3_IREN ((uint32_t)0x00000002) /*!< IrDA mode Enable */
+#define USART_CR3_IRLP ((uint32_t)0x00000004) /*!< IrDA Low-Power */
+#define USART_CR3_HDSEL ((uint32_t)0x00000008) /*!< Half-Duplex Selection */
+#define USART_CR3_NACK ((uint32_t)0x00000010) /*!< SmartCard NACK enable */
+#define USART_CR3_SCEN ((uint32_t)0x00000020) /*!< SmartCard mode enable */
+#define USART_CR3_DMAR ((uint32_t)0x00000040) /*!< DMA Enable Receiver */
+#define USART_CR3_DMAT ((uint32_t)0x00000080) /*!< DMA Enable Transmitter */
+#define USART_CR3_RTSE ((uint32_t)0x00000100) /*!< RTS Enable */
+#define USART_CR3_CTSE ((uint32_t)0x00000200) /*!< CTS Enable */
+#define USART_CR3_CTSIE ((uint32_t)0x00000400) /*!< CTS Interrupt Enable */
+#define USART_CR3_ONEBIT ((uint32_t)0x00000800) /*!< One sample bit method enable */
+#define USART_CR3_OVRDIS ((uint32_t)0x00001000) /*!< Overrun Disable */
+#define USART_CR3_DDRE ((uint32_t)0x00002000) /*!< DMA Disable on Reception Error */
+#define USART_CR3_DEM ((uint32_t)0x00004000) /*!< Driver Enable Mode */
+#define USART_CR3_DEP ((uint32_t)0x00008000) /*!< Driver Enable Polarity Selection */
+#define USART_CR3_SCARCNT ((uint32_t)0x000E0000) /*!< SCARCNT[2:0] bits (SmartCard Auto-Retry Count) */
+#define USART_CR3_SCARCNT_0 ((uint32_t)0x00020000) /*!< Bit 0 */
+#define USART_CR3_SCARCNT_1 ((uint32_t)0x00040000) /*!< Bit 1 */
+#define USART_CR3_SCARCNT_2 ((uint32_t)0x00080000) /*!< Bit 2 */
+#define USART_CR3_WUS ((uint32_t)0x00300000) /*!< WUS[1:0] bits (Wake UP Interrupt Flag Selection) */
+#define USART_CR3_WUS_0 ((uint32_t)0x00100000) /*!< Bit 0 */
+#define USART_CR3_WUS_1 ((uint32_t)0x00200000) /*!< Bit 1 */
+#define USART_CR3_WUFIE ((uint32_t)0x00400000) /*!< Wake Up Interrupt Enable */
+
+/****************** Bit definition for USART_BRR register *******************/
+#define USART_BRR_DIV_FRACTION ((uint32_t)0x0000000F) /*!< Fraction of USARTDIV */
+#define USART_BRR_DIV_MANTISSA ((uint32_t)0x0000FFF0) /*!< Mantissa of USARTDIV */
+
+/****************** Bit definition for USART_GTPR register ******************/
+#define USART_GTPR_PSC ((uint32_t)0x000000FF) /*!< PSC[7:0] bits (Prescaler value) */
+#define USART_GTPR_GT ((uint32_t)0x0000FF00) /*!< GT[7:0] bits (Guard time value) */
+
+
+/******************* Bit definition for USART_RTOR register *****************/
+#define USART_RTOR_RTO ((uint32_t)0x00FFFFFF) /*!< Receiver Time Out Value */
+#define USART_RTOR_BLEN ((uint32_t)0xFF000000) /*!< Block Length */
+
+/******************* Bit definition for USART_RQR register ******************/
+#define USART_RQR_ABRRQ ((uint32_t)0x00000001) /*!< Auto-Baud Rate Request */
+#define USART_RQR_SBKRQ ((uint32_t)0x00000002) /*!< Send Break Request */
+#define USART_RQR_MMRQ ((uint32_t)0x00000004) /*!< Mute Mode Request */
+#define USART_RQR_RXFRQ ((uint32_t)0x00000008) /*!< Receive Data flush Request */
+#define USART_RQR_TXFRQ ((uint32_t)0x00000010) /*!< Transmit data flush Request */
+
+/******************* Bit definition for USART_ISR register ******************/
+#define USART_ISR_PE ((uint32_t)0x00000001) /*!< Parity Error */
+#define USART_ISR_FE ((uint32_t)0x00000002) /*!< Framing Error */
+#define USART_ISR_NE ((uint32_t)0x00000004) /*!< Noise detected Flag */
+#define USART_ISR_ORE ((uint32_t)0x00000008) /*!< OverRun Error */
+#define USART_ISR_IDLE ((uint32_t)0x00000010) /*!< IDLE line detected */
+#define USART_ISR_RXNE ((uint32_t)0x00000020) /*!< Read Data Register Not Empty */
+#define USART_ISR_TC ((uint32_t)0x00000040) /*!< Transmission Complete */
+#define USART_ISR_TXE ((uint32_t)0x00000080) /*!< Transmit Data Register Empty */
+#define USART_ISR_LBDF ((uint32_t)0x00000100) /*!< LIN Break Detection Flag */
+#define USART_ISR_CTSIF ((uint32_t)0x00000200) /*!< CTS interrupt flag */
+#define USART_ISR_CTS ((uint32_t)0x00000400) /*!< CTS flag */
+#define USART_ISR_RTOF ((uint32_t)0x00000800) /*!< Receiver Time Out */
+#define USART_ISR_EOBF ((uint32_t)0x00001000) /*!< End Of Block Flag */
+#define USART_ISR_ABRE ((uint32_t)0x00004000) /*!< Auto-Baud Rate Error */
+#define USART_ISR_ABRF ((uint32_t)0x00008000) /*!< Auto-Baud Rate Flag */
+#define USART_ISR_BUSY ((uint32_t)0x00010000) /*!< Busy Flag */
+#define USART_ISR_CMF ((uint32_t)0x00020000) /*!< Character Match Flag */
+#define USART_ISR_SBKF ((uint32_t)0x00040000) /*!< Send Break Flag */
+#define USART_ISR_RWU ((uint32_t)0x00080000) /*!< Receive Wake Up from mute mode Flag */
+#define USART_ISR_WUF ((uint32_t)0x00100000) /*!< Wake Up from stop mode Flag */
+#define USART_ISR_TEACK ((uint32_t)0x00200000) /*!< Transmit Enable Acknowledge Flag */
+#define USART_ISR_REACK ((uint32_t)0x00400000) /*!< Receive Enable Acknowledge Flag */
+
+/******************* Bit definition for USART_ICR register ******************/
+#define USART_ICR_PECF ((uint32_t)0x00000001) /*!< Parity Error Clear Flag */
+#define USART_ICR_FECF ((uint32_t)0x00000002) /*!< Framing Error Clear Flag */
+#define USART_ICR_NCF ((uint32_t)0x00000004) /*!< Noise detected Clear Flag */
+#define USART_ICR_ORECF ((uint32_t)0x00000008) /*!< OverRun Error Clear Flag */
+#define USART_ICR_IDLECF ((uint32_t)0x00000010) /*!< IDLE line detected Clear Flag */
+#define USART_ICR_TCCF ((uint32_t)0x00000040) /*!< Transmission Complete Clear Flag */
+#define USART_ICR_LBDCF ((uint32_t)0x00000100) /*!< LIN Break Detection Clear Flag */
+#define USART_ICR_CTSCF ((uint32_t)0x00000200) /*!< CTS Interrupt Clear Flag */
+#define USART_ICR_RTOCF ((uint32_t)0x00000800) /*!< Receiver Time Out Clear Flag */
+#define USART_ICR_EOBCF ((uint32_t)0x00001000) /*!< End Of Block Clear Flag */
+#define USART_ICR_CMCF ((uint32_t)0x00020000) /*!< Character Match Clear Flag */
+#define USART_ICR_WUCF ((uint32_t)0x00100000) /*!< Wake Up from stop mode Clear Flag */
+
+/******************* Bit definition for USART_RDR register ******************/
+#define USART_RDR_RDR ((uint16_t)0x01FF) /*!< RDR[8:0] bits (Receive Data value) */
+
+/******************* Bit definition for USART_TDR register ******************/
+#define USART_TDR_TDR ((uint16_t)0x01FF) /*!< TDR[8:0] bits (Transmit Data value) */
+
+/******************************************************************************/
+/* */
+/* Window WATCHDOG (WWDG) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for WWDG_CR register ********************/
+#define WWDG_CR_T ((uint32_t)0x7F) /*!<T[6:0] bits (7-Bit counter (MSB to LSB)) */
+#define WWDG_CR_T0 ((uint32_t)0x01) /*!<Bit 0 */
+#define WWDG_CR_T1 ((uint32_t)0x02) /*!<Bit 1 */
+#define WWDG_CR_T2 ((uint32_t)0x04) /*!<Bit 2 */
+#define WWDG_CR_T3 ((uint32_t)0x08) /*!<Bit 3 */
+#define WWDG_CR_T4 ((uint32_t)0x10) /*!<Bit 4 */
+#define WWDG_CR_T5 ((uint32_t)0x20) /*!<Bit 5 */
+#define WWDG_CR_T6 ((uint32_t)0x40) /*!<Bit 6 */
+
+#define WWDG_CR_WDGA ((uint32_t)0x80) /*!<Activation bit */
+
+/******************* Bit definition for WWDG_CFR register *******************/
+#define WWDG_CFR_W ((uint32_t)0x007F) /*!<W[6:0] bits (7-bit window value) */
+#define WWDG_CFR_W0 ((uint32_t)0x0001) /*!<Bit 0 */
+#define WWDG_CFR_W1 ((uint32_t)0x0002) /*!<Bit 1 */
+#define WWDG_CFR_W2 ((uint32_t)0x0004) /*!<Bit 2 */
+#define WWDG_CFR_W3 ((uint32_t)0x0008) /*!<Bit 3 */
+#define WWDG_CFR_W4 ((uint32_t)0x0010) /*!<Bit 4 */
+#define WWDG_CFR_W5 ((uint32_t)0x0020) /*!<Bit 5 */
+#define WWDG_CFR_W6 ((uint32_t)0x0040) /*!<Bit 6 */
+
+#define WWDG_CFR_WDGTB ((uint32_t)0x0180) /*!<WDGTB[1:0] bits (Timer Base) */
+#define WWDG_CFR_WDGTB0 ((uint32_t)0x0080) /*!<Bit 0 */
+#define WWDG_CFR_WDGTB1 ((uint32_t)0x0100) /*!<Bit 1 */
+
+#define WWDG_CFR_EWI ((uint32_t)0x0200) /*!<Early Wakeup Interrupt */
+
+/******************* Bit definition for WWDG_SR register ********************/
+#define WWDG_SR_EWIF ((uint32_t)0x01) /*!<Early Wakeup Interrupt Flag */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+
+/** @addtogroup Exported_macro
+ * @{
+ */
+
+/****************************** ADC Instances *********************************/
+#define IS_ADC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == ADC1)
+
+#define IS_ADC_COMMON_INSTANCE(INSTANCE) ((INSTANCE) == ADC)
+
+/****************************** CRC Instances *********************************/
+#define IS_CRC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CRC)
+
+/******************************* DMA Instances ******************************/
+#define IS_DMA_ALL_INSTANCE(INSTANCE) (((INSTANCE) == DMA1_Channel1) || \
+ ((INSTANCE) == DMA1_Channel2) || \
+ ((INSTANCE) == DMA1_Channel3) || \
+ ((INSTANCE) == DMA1_Channel4) || \
+ ((INSTANCE) == DMA1_Channel5))
+
+/****************************** GPIO Instances ********************************/
+#define IS_GPIO_ALL_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB) || \
+ ((INSTANCE) == GPIOC) || \
+ ((INSTANCE) == GPIOD) || \
+ ((INSTANCE) == GPIOF))
+
+#define IS_GPIO_AF_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB))
+
+#define IS_GPIO_LOCK_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB))
+
+/****************************** I2C Instances *********************************/
+#define IS_I2C_ALL_INSTANCE(INSTANCE) ((INSTANCE) == I2C1)
+
+/****************************** IWDG Instances ********************************/
+#define IS_IWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == IWDG)
+
+/****************************** RTC Instances *********************************/
+#define IS_RTC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == RTC)
+
+/****************************** SMBUS Instances *********************************/
+#define IS_SMBUS_ALL_INSTANCE(INSTANCE) ((INSTANCE) == I2C1)
+
+/****************************** SPI Instances *********************************/
+#define IS_SPI_ALL_INSTANCE(INSTANCE) ((INSTANCE) == SPI1)
+
+/****************************** TIM Instances *********************************/
+#define IS_TIM_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CC1_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CC2_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CC3_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CC4_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_TIX_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_ENCODER_INTERFACE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_HALL_INTERFACE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1))
+
+#define IS_TIM_XOR_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_MASTER_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_SLAVE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_32B_COUNTER_INSTANCE(INSTANCE) (0)
+
+#define IS_TIM_DMABURST_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_BREAK_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CCX_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM3) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM14) && \
+ (((CHANNEL) == TIM_CHANNEL_1))) \
+ || \
+ (((INSTANCE) == TIM16) && \
+ (((CHANNEL) == TIM_CHANNEL_1))) \
+ || \
+ (((INSTANCE) == TIM17) && \
+ (((CHANNEL) == TIM_CHANNEL_1))))
+
+#define IS_TIM_CCXN_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3))) \
+ || \
+ (((INSTANCE) == TIM16) && \
+ ((CHANNEL) == TIM_CHANNEL_1)) \
+ || \
+ (((INSTANCE) == TIM17) && \
+ ((CHANNEL) == TIM_CHANNEL_1)))
+
+#define IS_TIM_COUNTER_MODE_SELECT_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_REPETITION_COUNTER_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CLOCK_DIVISION_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_DMA_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_DMA_CC_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_COMMUTATION_EVENT_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_REMAP_INSTANCE(INSTANCE)\
+ ((INSTANCE) == TIM14)
+
+/******************** USART Instances : Synchronous mode **********************/
+#define IS_USART_INSTANCE(INSTANCE) ((INSTANCE) == USART1)
+
+/******************** USART Instances : auto Baud rate detection **************/
+#define IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(INSTANCE) ((INSTANCE) == USART1)
+
+/******************** UART Instances : Asynchronous mode **********************/
+#define IS_UART_INSTANCE(INSTANCE) ((INSTANCE) == USART1)
+
+/******************** UART Instances : Half-Duplex mode **********************/
+#define IS_UART_HALFDUPLEX_INSTANCE(INSTANCE) ((INSTANCE) == USART1)
+
+/****************** UART Instances : Hardware Flow control ********************/
+#define IS_UART_HWFLOW_INSTANCE(INSTANCE) ((INSTANCE) == USART1)
+
+/****************** UART Instances : Auto Baud Rate detection ********************/
+#define IS_UART_AUTOBAUDRATE_DETECTION_INSTANCE(INSTANCE) ((INSTANCE) == USART1)
+
+/****************** UART Instances : Driver enable detection ********************/
+#define IS_UART_DRIVER_ENABLE_INSTANCE(INSTANCE) ((INSTANCE) == USART1)
+
+/****************************** WWDG Instances ********************************/
+#define IS_WWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == WWDG)
+
+/**
+ * @}
+ */
+
+
+/******************************************************************************/
+/* For a painless codes migration between the STM32F0xx device product */
+/* lines, the aliases defined below are put in place to overcome the */
+/* differences in the interrupt handlers and IRQn definitions. */
+/* No need to update developed interrupt code when moving across */
+/* product lines within the same STM32F0 Family */
+/******************************************************************************/
+
+/* Aliases for __IRQn */
+#define RCC_CRS_IRQn RCC_IRQn
+#define DMA1_Channel4_5_6_7_IRQn DMA1_Channel4_5_IRQn
+#define ADC1_COMP_IRQn ADC1_IRQn
+#define TIM6_DAC_IRQn TIM6_IRQn
+
+/* Aliases for __IRQHandler */
+#define RCC_CRS_IRQHandler RCC_IRQHandler
+#define DMA1_Channel4_5_6_7_IRQHandler DMA1_Channel4_5_IRQHandler
+#define ADC1_COMP_IRQHandler ADC1_IRQHandler
+#define TIM6_DAC_IRQHandler TIM6_IRQHandler
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F030x6_H */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/include/devices/stm32f030x8.h b/f0/include/devices/stm32f030x8.h
new file mode 100755
index 0000000000000000000000000000000000000000..2029558bdd02021f565d72705cd02d2a037a277d
--- /dev/null
+++ b/f0/include/devices/stm32f030x8.h
@@ -0,0 +1,3214 @@
+/**
+ ******************************************************************************
+ * @file stm32f030x8.h
+ * @author MCD Application Team
+ * @version V2.2.1
+ * @date 09-January-2015
+ * @brief CMSIS STM32F030x8 devices Peripheral Access Layer Header File.
+ *
+ * This file contains:
+ * - Data structures and the address mapping for all peripherals
+ * - Peripheral's registers declarations and bits definition
+ * - Macros to access peripheral’s registers hardware
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS_Device
+ * @{
+ */
+
+/** @addtogroup stm32f030x8
+ * @{
+ */
+
+#ifndef __STM32F030x8_H
+#define __STM32F030x8_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+
+/**
+ * @brief Configuration of the Cortex-M0 Processor and Core Peripherals
+ */
+#define __CM0_REV 0 /*!< Core Revision r0p0 */
+#define __MPU_PRESENT 0 /*!< STM32F0xx do not provide MPU */
+#define __NVIC_PRIO_BITS 2 /*!< STM32F0xx uses 2 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F030x8 device Interrupt Number Definition
+ */
+typedef enum
+{
+/****** Cortex-M0 Processor Exceptions Numbers **************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */
+ SVC_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */
+
+/****** STM32F030x8 specific Interrupt Numbers **************************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ RTC_IRQn = 2, /*!< RTC Interrupt through EXTI Lines 17, 19 and 20 */
+ FLASH_IRQn = 3, /*!< FLASH global Interrupt */
+ RCC_IRQn = 4, /*!< RCC global Interrupt */
+ EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupts */
+ EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupts */
+ EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupts */
+ DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */
+ DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupts */
+ DMA1_Channel4_5_IRQn = 11, /*!< DMA1 Channel 4 and Channel 5 Interrupts */
+ ADC1_IRQn = 12, /*!< ADC1 global Interrupt */
+ TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupts */
+ TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */
+ TIM3_IRQn = 16, /*!< TIM3 global Interrupt */
+ TIM6_IRQn = 17, /*!< TIM6 global Interrupt */
+ TIM14_IRQn = 19, /*!< TIM14 global Interrupt */
+ TIM15_IRQn = 20, /*!< TIM15 global Interrupt */
+ TIM16_IRQn = 21, /*!< TIM16 global Interrupt */
+ TIM17_IRQn = 22, /*!< TIM17 global Interrupt */
+ I2C1_IRQn = 23, /*!< I2C1 Event Interrupt */
+ I2C2_IRQn = 24, /*!< I2C2 Event Interrupt */
+ SPI1_IRQn = 25, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 26, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 27, /*!< USART1 global Interrupt */
+ USART2_IRQn = 28 /*!< USART2 global Interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm0.h" /* Cortex-M0 processor and core peripherals */
+#include "system_stm32f0xx.h" /* STM32F0xx System Header */
+#include <stdint.h>
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< ADC Interrupt and Status register, Address offset:0x00 */
+ __IO uint32_t IER; /*!< ADC Interrupt Enable register, Address offset:0x04 */
+ __IO uint32_t CR; /*!< ADC Control register, Address offset:0x08 */
+ __IO uint32_t CFGR1; /*!< ADC Configuration register 1, Address offset:0x0C */
+ __IO uint32_t CFGR2; /*!< ADC Configuration register 2, Address offset:0x10 */
+ __IO uint32_t SMPR; /*!< ADC Sampling time register, Address offset:0x14 */
+ uint32_t RESERVED1; /*!< Reserved, 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, 0x1C */
+ __IO uint32_t TR; /*!< ADC watchdog threshold register, Address offset:0x20 */
+ uint32_t RESERVED3; /*!< Reserved, 0x24 */
+ __IO uint32_t CHSELR; /*!< ADC channel selection register, Address offset:0x28 */
+ uint32_t RESERVED4[5]; /*!< Reserved, 0x2C */
+ __IO uint32_t DR; /*!< ADC data register, Address offset:0x40 */
+}ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CCR;
+}ADC_Common_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+ uint32_t RESERVED2; /*!< Reserved, 0x0C */
+ __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */
+ __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */
+}CRC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< DMA channel x configuration register */
+ __IO uint32_t CNDTR; /*!< DMA channel x number of data register */
+ __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */
+ __IO uint32_t CMAR; /*!< DMA channel x memory address register */
+}DMA_Channel_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */
+ __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */
+}DMA_TypeDef;
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!<EXTI Interrupt mask register, Address offset: 0x00 */
+ __IO uint32_t EMR; /*!<EXTI Event mask register, Address offset: 0x04 */
+ __IO uint32_t RTSR; /*!<EXTI Rising trigger selection register , Address offset: 0x08 */
+ __IO uint32_t FTSR; /*!<EXTI Falling trigger selection register, Address offset: 0x0C */
+ __IO uint32_t SWIER; /*!<EXTI Software interrupt event register, Address offset: 0x10 */
+ __IO uint32_t PR; /*!<EXTI Pending register, Address offset: 0x14 */
+}EXTI_TypeDef;
+
+/**
+ * @brief FLASH Registers
+ */
+typedef struct
+{
+ __IO uint32_t ACR; /*!<FLASH access control register, Address offset: 0x00 */
+ __IO uint32_t KEYR; /*!<FLASH key register, Address offset: 0x04 */
+ __IO uint32_t OPTKEYR; /*!<FLASH OPT key register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!<FLASH status register, Address offset: 0x0C */
+ __IO uint32_t CR; /*!<FLASH control register, Address offset: 0x10 */
+ __IO uint32_t AR; /*!<FLASH address register, Address offset: 0x14 */
+ __IO uint32_t RESERVED; /*!< Reserved, 0x18 */
+ __IO uint32_t OBR; /*!<FLASH option bytes register, Address offset: 0x1C */
+ __IO uint32_t WRPR; /*!<FLASH option bytes register, Address offset: 0x20 */
+}FLASH_TypeDef;
+
+
+/**
+ * @brief Option Bytes Registers
+ */
+typedef struct
+{
+ __IO uint16_t RDP; /*!< FLASH option byte Read protection, Address offset: 0x00 */
+ __IO uint16_t USER; /*!< FLASH option byte user options, Address offset: 0x02 */
+ __IO uint16_t DATA0; /*!< User data byte 0 (stored in FLASH_OBR[23:16]), Address offset: 0x04 */
+ __IO uint16_t DATA1; /*!< User data byte 1 (stored in FLASH_OBR[31:24]), Address offset: 0x06 */
+ __IO uint16_t WRP0; /*!< FLASH option byte write protection 0, Address offset: 0x08 */
+ __IO uint16_t WRP1; /*!< FLASH option byte write protection 1, Address offset: 0x0A */
+ __IO uint16_t WRP2; /*!< FLASH option byte write protection 2, Address offset: 0x0C */
+ __IO uint16_t WRP3; /*!< FLASH option byte write protection 3, Address offset: 0x0E */
+}OB_TypeDef;
+
+/**
+ * @brief General Purpose I/O
+ */
+
+typedef struct
+{
+ __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */
+ __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */
+ __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */
+ __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */
+ __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */
+ __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */
+ __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x1A */
+ __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */
+ __IO uint32_t AFR[2]; /*!< GPIO alternate function low register, Address offset: 0x20-0x24 */
+ __IO uint32_t BRR; /*!< GPIO bit reset register, Address offset: 0x28 */
+}GPIO_TypeDef;
+
+/**
+ * @brief SysTem Configuration
+ */
+
+typedef struct
+{
+ __IO uint32_t CFGR1; /*!< SYSCFG configuration register 1, Address offset: 0x00 */
+ uint32_t RESERVED; /*!< Reserved, 0x04 */
+ __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration register, Address offset: 0x14-0x08 */
+ __IO uint32_t CFGR2; /*!< SYSCFG configuration register 2, Address offset: 0x18 */
+}SYSCFG_TypeDef;
+
+/**
+ * @brief Inter-integrated Circuit Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */
+ __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */
+ __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */
+ __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */
+ __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */
+ __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */
+ __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */
+ __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */
+ __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */
+ __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */
+}I2C_TypeDef;
+
+/**
+ * @brief Independent WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */
+ __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */
+ __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */
+ __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */
+}IWDG_TypeDef;
+
+/**
+ * @brief Power Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< PWR power control register, Address offset: 0x00 */
+ __IO uint32_t CSR; /*!< PWR power control/status register, Address offset: 0x04 */
+}PWR_TypeDef;
+
+/**
+ * @brief Reset and Clock Control
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */
+ __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x04 */
+ __IO uint32_t CIR; /*!< RCC clock interrupt register, Address offset: 0x08 */
+ __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x0C */
+ __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x10 */
+ __IO uint32_t AHBENR; /*!< RCC AHB peripheral clock register, Address offset: 0x14 */
+ __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x18 */
+ __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x1C */
+ __IO uint32_t BDCR; /*!< RCC Backup domain control register, Address offset: 0x20 */
+ __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x24 */
+ __IO uint32_t AHBRSTR; /*!< RCC AHB peripheral reset register, Address offset: 0x28 */
+ __IO uint32_t CFGR2; /*!< RCC clock configuration register 2, Address offset: 0x2C */
+ __IO uint32_t CFGR3; /*!< RCC clock configuration register 3, Address offset: 0x30 */
+ __IO uint32_t CR2; /*!< RCC clock control register 2, Address offset: 0x34 */
+}RCC_TypeDef;
+
+/**
+ * @brief Real-Time Clock
+ */
+
+typedef struct
+{
+ __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */
+ __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */
+ uint32_t RESERVED1; /*!< Reserved, Address offset: 0x14 */
+ uint32_t RESERVED2; /*!< Reserved, Address offset: 0x18 */
+ __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */
+ uint32_t RESERVED3; /*!< Reserved, Address offset: 0x20 */
+ __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */
+ __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */
+ __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */
+ __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */
+ __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */
+ __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */
+ __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */
+ __IO uint32_t TAFCR; /*!< RTC tamper and alternate function configuration register, Address offset: 0x40 */
+ __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */
+}RTC_TypeDef;
+
+/**
+ * @brief Serial Peripheral Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< SPI Control register 1 (not used in I2S mode), Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */
+ __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */
+ __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */
+ __IO uint32_t RXCRCR; /*!< SPI Rx CRC register (not used in I2S mode), Address offset: 0x14 */
+ __IO uint32_t TXCRCR; /*!< SPI Tx CRC register (not used in I2S mode), Address offset: 0x18 */
+ __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */
+ __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */
+}SPI_TypeDef;
+
+/**
+ * @brief TIM
+ */
+typedef struct
+{
+ __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */
+ __IO uint32_t SMCR; /*!< TIM slave Mode Control register, Address offset: 0x08 */
+ __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */
+ __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */
+ __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */
+ __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */
+ __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */
+ __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */
+ __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */
+ __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */
+ __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */
+ __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */
+ __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */
+ __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */
+ __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */
+ __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */
+ __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */
+ __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */
+ __IO uint32_t DMAR; /*!< TIM DMA address for full transfer register, Address offset: 0x4C */
+ __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */
+}TIM_TypeDef;
+
+
+/**
+ * @brief Universal Synchronous Asynchronous Receiver Transmitter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */
+ __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */
+ __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */
+ __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */
+ __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */
+ __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */
+ __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */
+ __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */
+ __IO uint16_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */
+ uint16_t RESERVED1; /*!< Reserved, 0x26 */
+ __IO uint16_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */
+ uint16_t RESERVED2; /*!< Reserved, 0x2A */
+}USART_TypeDef;
+
+/**
+ * @brief Window WATCHDOG
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */
+ __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */
+}WWDG_TypeDef;
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_memory_map
+ * @{
+ */
+
+#define FLASH_BASE ((uint32_t)0x08000000) /*!< FLASH base address in the alias region */
+#define SRAM_BASE ((uint32_t)0x20000000) /*!< SRAM base address in the alias region */
+#define PERIPH_BASE ((uint32_t)0x40000000) /*!< Peripheral base address in the alias region */
+
+/*!< Peripheral memory map */
+#define APBPERIPH_BASE PERIPH_BASE
+#define AHBPERIPH_BASE (PERIPH_BASE + 0x00020000)
+#define AHB2PERIPH_BASE (PERIPH_BASE + 0x08000000)
+
+#define TIM3_BASE (APBPERIPH_BASE + 0x00000400)
+#define TIM6_BASE (APBPERIPH_BASE + 0x00001000)
+#define TIM14_BASE (APBPERIPH_BASE + 0x00002000)
+#define RTC_BASE (APBPERIPH_BASE + 0x00002800)
+#define WWDG_BASE (APBPERIPH_BASE + 0x00002C00)
+#define IWDG_BASE (APBPERIPH_BASE + 0x00003000)
+#define SPI2_BASE (APBPERIPH_BASE + 0x00003800)
+#define USART2_BASE (APBPERIPH_BASE + 0x00004400)
+#define I2C1_BASE (APBPERIPH_BASE + 0x00005400)
+#define I2C2_BASE (APBPERIPH_BASE + 0x00005800)
+#define PWR_BASE (APBPERIPH_BASE + 0x00007000)
+#define SYSCFG_BASE (APBPERIPH_BASE + 0x00010000)
+#define EXTI_BASE (APBPERIPH_BASE + 0x00010400)
+#define ADC1_BASE (APBPERIPH_BASE + 0x00012400)
+#define ADC_BASE (APBPERIPH_BASE + 0x00012708)
+#define TIM1_BASE (APBPERIPH_BASE + 0x00012C00)
+#define SPI1_BASE (APBPERIPH_BASE + 0x00013000)
+#define USART1_BASE (APBPERIPH_BASE + 0x00013800)
+#define TIM15_BASE (APBPERIPH_BASE + 0x00014000)
+#define TIM16_BASE (APBPERIPH_BASE + 0x00014400)
+#define TIM17_BASE (APBPERIPH_BASE + 0x00014800)
+#define DBGMCU_BASE (APBPERIPH_BASE + 0x00015800)
+
+#define DMA1_BASE (AHBPERIPH_BASE + 0x00000000)
+#define DMA1_Channel1_BASE (DMA1_BASE + 0x00000008)
+#define DMA1_Channel2_BASE (DMA1_BASE + 0x0000001C)
+#define DMA1_Channel3_BASE (DMA1_BASE + 0x00000030)
+#define DMA1_Channel4_BASE (DMA1_BASE + 0x00000044)
+#define DMA1_Channel5_BASE (DMA1_BASE + 0x00000058)
+
+#define RCC_BASE (AHBPERIPH_BASE + 0x00001000)
+#define FLASH_R_BASE (AHBPERIPH_BASE + 0x00002000) /*!< FLASH registers base address */
+#define OB_BASE ((uint32_t)0x1FFFF800) /*!< FLASH Option Bytes base address */
+#define CRC_BASE (AHBPERIPH_BASE + 0x00003000)
+
+#define GPIOA_BASE (AHB2PERIPH_BASE + 0x00000000)
+#define GPIOB_BASE (AHB2PERIPH_BASE + 0x00000400)
+#define GPIOC_BASE (AHB2PERIPH_BASE + 0x00000800)
+#define GPIOD_BASE (AHB2PERIPH_BASE + 0x00000C00)
+#define GPIOF_BASE (AHB2PERIPH_BASE + 0x00001400)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_declaration
+ * @{
+ */
+
+#define TIM3 ((TIM_TypeDef *) TIM3_BASE)
+#define TIM6 ((TIM_TypeDef *) TIM6_BASE)
+#define TIM14 ((TIM_TypeDef *) TIM14_BASE)
+#define RTC ((RTC_TypeDef *) RTC_BASE)
+#define WWDG ((WWDG_TypeDef *) WWDG_BASE)
+#define IWDG ((IWDG_TypeDef *) IWDG_BASE)
+#define SPI2 ((SPI_TypeDef *) SPI2_BASE)
+#define USART2 ((USART_TypeDef *) USART2_BASE)
+#define I2C1 ((I2C_TypeDef *) I2C1_BASE)
+#define I2C2 ((I2C_TypeDef *) I2C2_BASE)
+#define PWR ((PWR_TypeDef *) PWR_BASE)
+#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE)
+#define EXTI ((EXTI_TypeDef *) EXTI_BASE)
+#define ADC1 ((ADC_TypeDef *) ADC1_BASE)
+#define ADC ((ADC_Common_TypeDef *) ADC_BASE)
+#define TIM1 ((TIM_TypeDef *) TIM1_BASE)
+#define SPI1 ((SPI_TypeDef *) SPI1_BASE)
+#define USART1 ((USART_TypeDef *) USART1_BASE)
+#define TIM15 ((TIM_TypeDef *) TIM15_BASE)
+#define TIM16 ((TIM_TypeDef *) TIM16_BASE)
+#define TIM17 ((TIM_TypeDef *) TIM17_BASE)
+#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE)
+#define DMA1 ((DMA_TypeDef *) DMA1_BASE)
+#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE)
+#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE)
+#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE)
+#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE)
+#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE)
+#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE)
+#define OB ((OB_TypeDef *) OB_BASE)
+#define RCC ((RCC_TypeDef *) RCC_BASE)
+#define CRC ((CRC_TypeDef *) CRC_BASE)
+#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE)
+#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE)
+#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE)
+#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE)
+#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_constants
+ * @{
+ */
+
+ /** @addtogroup Peripheral_Registers_Bits_Definition
+ * @{
+ */
+
+/******************************************************************************/
+/* Peripheral Registers Bits Definition */
+/******************************************************************************/
+/******************************************************************************/
+/* */
+/* Analog to Digital Converter (ADC) */
+/* */
+/******************************************************************************/
+/******************** Bits definition for ADC_ISR register ******************/
+#define ADC_ISR_AWD ((uint32_t)0x00000080) /*!< Analog watchdog flag */
+#define ADC_ISR_OVR ((uint32_t)0x00000010) /*!< Overrun flag */
+#define ADC_ISR_EOSEQ ((uint32_t)0x00000008) /*!< End of Sequence flag */
+#define ADC_ISR_EOC ((uint32_t)0x00000004) /*!< End of Conversion */
+#define ADC_ISR_EOSMP ((uint32_t)0x00000002) /*!< End of sampling flag */
+#define ADC_ISR_ADRDY ((uint32_t)0x00000001) /*!< ADC Ready */
+
+/* Old EOSEQ bit definition, maintained for legacy purpose */
+#define ADC_ISR_EOS ADC_ISR_EOSEQ
+
+/******************** Bits definition for ADC_IER register ******************/
+#define ADC_IER_AWDIE ((uint32_t)0x00000080) /*!< Analog Watchdog interrupt enable */
+#define ADC_IER_OVRIE ((uint32_t)0x00000010) /*!< Overrun interrupt enable */
+#define ADC_IER_EOSEQIE ((uint32_t)0x00000008) /*!< End of Sequence of conversion interrupt enable */
+#define ADC_IER_EOCIE ((uint32_t)0x00000004) /*!< End of Conversion interrupt enable */
+#define ADC_IER_EOSMPIE ((uint32_t)0x00000002) /*!< End of sampling interrupt enable */
+#define ADC_IER_ADRDYIE ((uint32_t)0x00000001) /*!< ADC Ready interrupt enable */
+
+/* Old EOSEQIE bit definition, maintained for legacy purpose */
+#define ADC_IER_EOSIE ADC_IER_EOSEQIE
+
+/******************** Bits definition for ADC_CR register *******************/
+#define ADC_CR_ADCAL ((uint32_t)0x80000000) /*!< ADC calibration */
+#define ADC_CR_ADSTP ((uint32_t)0x00000010) /*!< ADC stop of conversion command */
+#define ADC_CR_ADSTART ((uint32_t)0x00000004) /*!< ADC start of conversion */
+#define ADC_CR_ADDIS ((uint32_t)0x00000002) /*!< ADC disable command */
+#define ADC_CR_ADEN ((uint32_t)0x00000001) /*!< ADC enable control */
+
+/******************* Bits definition for ADC_CFGR1 register *****************/
+#define ADC_CFGR1_AWDCH ((uint32_t)0x7C000000) /*!< AWDCH[4:0] bits (Analog watchdog channel select bits) */
+#define ADC_CFGR1_AWDCH_0 ((uint32_t)0x04000000) /*!< Bit 0 */
+#define ADC_CFGR1_AWDCH_1 ((uint32_t)0x08000000) /*!< Bit 1 */
+#define ADC_CFGR1_AWDCH_2 ((uint32_t)0x10000000) /*!< Bit 2 */
+#define ADC_CFGR1_AWDCH_3 ((uint32_t)0x20000000) /*!< Bit 3 */
+#define ADC_CFGR1_AWDCH_4 ((uint32_t)0x40000000) /*!< Bit 4 */
+#define ADC_CFGR1_AWDEN ((uint32_t)0x00800000) /*!< Analog watchdog enable on regular channels */
+#define ADC_CFGR1_AWDSGL ((uint32_t)0x00400000) /*!< Enable the watchdog on a single channel or on all channels */
+#define ADC_CFGR1_DISCEN ((uint32_t)0x00010000) /*!< Discontinuous mode on regular channels */
+#define ADC_CFGR1_AUTOFF ((uint32_t)0x00008000) /*!< ADC auto power off */
+#define ADC_CFGR1_WAIT ((uint32_t)0x00004000) /*!< ADC wait conversion mode */
+#define ADC_CFGR1_CONT ((uint32_t)0x00002000) /*!< Continuous Conversion */
+#define ADC_CFGR1_OVRMOD ((uint32_t)0x00001000) /*!< Overrun mode */
+#define ADC_CFGR1_EXTEN ((uint32_t)0x00000C00) /*!< EXTEN[1:0] bits (External Trigger Conversion mode for regular channels) */
+#define ADC_CFGR1_EXTEN_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define ADC_CFGR1_EXTEN_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define ADC_CFGR1_EXTSEL ((uint32_t)0x000001C0) /*!< EXTSEL[2:0] bits (External Event Select for regular group) */
+#define ADC_CFGR1_EXTSEL_0 ((uint32_t)0x00000040) /*!< Bit 0 */
+#define ADC_CFGR1_EXTSEL_1 ((uint32_t)0x00000080) /*!< Bit 1 */
+#define ADC_CFGR1_EXTSEL_2 ((uint32_t)0x00000100) /*!< Bit 2 */
+#define ADC_CFGR1_ALIGN ((uint32_t)0x00000020) /*!< Data Alignment */
+#define ADC_CFGR1_RES ((uint32_t)0x00000018) /*!< RES[1:0] bits (Resolution) */
+#define ADC_CFGR1_RES_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define ADC_CFGR1_RES_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define ADC_CFGR1_SCANDIR ((uint32_t)0x00000004) /*!< Sequence scan direction */
+#define ADC_CFGR1_DMACFG ((uint32_t)0x00000002) /*!< Direct memory access configuration */
+#define ADC_CFGR1_DMAEN ((uint32_t)0x00000001) /*!< Direct memory access enable */
+
+/* Old WAIT bit definition, maintained for legacy purpose */
+#define ADC_CFGR1_AUTDLY ADC_CFGR1_WAIT
+
+/******************* Bits definition for ADC_CFGR2 register *****************/
+#define ADC_CFGR2_CKMODE ((uint32_t)0xC0000000) /*!< ADC clock mode */
+#define ADC_CFGR2_CKMODE_1 ((uint32_t)0x80000000) /*!< ADC clocked by PCLK div4 */
+#define ADC_CFGR2_CKMODE_0 ((uint32_t)0x40000000) /*!< ADC clocked by PCLK div2 */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_CFGR2_JITOFFDIV4 ADC_CFGR2_CKMODE_1 /*!< ADC clocked by PCLK div4 */
+#define ADC_CFGR2_JITOFFDIV2 ADC_CFGR2_CKMODE_0 /*!< ADC clocked by PCLK div2 */
+
+/****************** Bit definition for ADC_SMPR register ********************/
+#define ADC_SMPR_SMP ((uint32_t)0x00000007) /*!< SMP[2:0] bits (Sampling time selection) */
+#define ADC_SMPR_SMP_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define ADC_SMPR_SMP_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define ADC_SMPR_SMP_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_SMPR1_SMPR ADC_SMPR_SMP /*!< SMP[2:0] bits (Sampling time selection) */
+#define ADC_SMPR1_SMPR_0 ADC_SMPR_SMP_0 /*!< Bit 0 */
+#define ADC_SMPR1_SMPR_1 ADC_SMPR_SMP_1 /*!< Bit 1 */
+#define ADC_SMPR1_SMPR_2 ADC_SMPR_SMP_2 /*!< Bit 2 */
+
+/******************* Bit definition for ADC_TR register ********************/
+#define ADC_TR_HT ((uint32_t)0x0FFF0000) /*!< Analog watchdog high threshold */
+#define ADC_TR_LT ((uint32_t)0x00000FFF) /*!< Analog watchdog low threshold */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_HTR_HT ADC_TR_HT /*!< Analog watchdog high threshold */
+#define ADC_LTR_LT ADC_TR_LT /*!< Analog watchdog low threshold */
+
+/****************** Bit definition for ADC_CHSELR register ******************/
+#define ADC_CHSELR_CHSEL18 ((uint32_t)0x00040000) /*!< Channel 18 selection */
+#define ADC_CHSELR_CHSEL17 ((uint32_t)0x00020000) /*!< Channel 17 selection */
+#define ADC_CHSELR_CHSEL16 ((uint32_t)0x00010000) /*!< Channel 16 selection */
+#define ADC_CHSELR_CHSEL15 ((uint32_t)0x00008000) /*!< Channel 15 selection */
+#define ADC_CHSELR_CHSEL14 ((uint32_t)0x00004000) /*!< Channel 14 selection */
+#define ADC_CHSELR_CHSEL13 ((uint32_t)0x00002000) /*!< Channel 13 selection */
+#define ADC_CHSELR_CHSEL12 ((uint32_t)0x00001000) /*!< Channel 12 selection */
+#define ADC_CHSELR_CHSEL11 ((uint32_t)0x00000800) /*!< Channel 11 selection */
+#define ADC_CHSELR_CHSEL10 ((uint32_t)0x00000400) /*!< Channel 10 selection */
+#define ADC_CHSELR_CHSEL9 ((uint32_t)0x00000200) /*!< Channel 9 selection */
+#define ADC_CHSELR_CHSEL8 ((uint32_t)0x00000100) /*!< Channel 8 selection */
+#define ADC_CHSELR_CHSEL7 ((uint32_t)0x00000080) /*!< Channel 7 selection */
+#define ADC_CHSELR_CHSEL6 ((uint32_t)0x00000040) /*!< Channel 6 selection */
+#define ADC_CHSELR_CHSEL5 ((uint32_t)0x00000020) /*!< Channel 5 selection */
+#define ADC_CHSELR_CHSEL4 ((uint32_t)0x00000010) /*!< Channel 4 selection */
+#define ADC_CHSELR_CHSEL3 ((uint32_t)0x00000008) /*!< Channel 3 selection */
+#define ADC_CHSELR_CHSEL2 ((uint32_t)0x00000004) /*!< Channel 2 selection */
+#define ADC_CHSELR_CHSEL1 ((uint32_t)0x00000002) /*!< Channel 1 selection */
+#define ADC_CHSELR_CHSEL0 ((uint32_t)0x00000001) /*!< Channel 0 selection */
+
+/******************** Bit definition for ADC_DR register ********************/
+#define ADC_DR_DATA ((uint32_t)0x0000FFFF) /*!< Regular data */
+
+/******************* Bit definition for ADC_CCR register ********************/
+#define ADC_CCR_VBATEN ((uint32_t)0x01000000) /*!< Voltage battery enable */
+#define ADC_CCR_TSEN ((uint32_t)0x00800000) /*!< Tempurature sensore enable */
+#define ADC_CCR_VREFEN ((uint32_t)0x00400000) /*!< Vrefint enable */
+
+/******************************************************************************/
+/* */
+/* CRC calculation unit (CRC) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for CRC_DR register *********************/
+#define CRC_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data register bits */
+
+/******************* Bit definition for CRC_IDR register ********************/
+#define CRC_IDR_IDR ((uint8_t)0xFF) /*!< General-purpose 8-bit data register bits */
+
+/******************** Bit definition for CRC_CR register ********************/
+#define CRC_CR_RESET ((uint32_t)0x00000001) /*!< RESET the CRC computation unit bit */
+#define CRC_CR_REV_IN ((uint32_t)0x00000060) /*!< REV_IN Reverse Input Data bits */
+#define CRC_CR_REV_IN_0 ((uint32_t)0x00000020) /*!< REV_IN Bit 0 */
+#define CRC_CR_REV_IN_1 ((uint32_t)0x00000040) /*!< REV_IN Bit 1 */
+#define CRC_CR_REV_OUT ((uint32_t)0x00000080) /*!< REV_OUT Reverse Output Data bits */
+
+/******************* Bit definition for CRC_INIT register *******************/
+#define CRC_INIT_INIT ((uint32_t)0xFFFFFFFF) /*!< Initial CRC value bits */
+
+/******************************************************************************/
+/* */
+/* Debug MCU (DBGMCU) */
+/* */
+/******************************************************************************/
+
+/**************** Bit definition for DBGMCU_IDCODE register *****************/
+#define DBGMCU_IDCODE_DEV_ID ((uint32_t)0x00000FFF) /*!< Device Identifier */
+
+#define DBGMCU_IDCODE_REV_ID ((uint32_t)0xFFFF0000) /*!< REV_ID[15:0] bits (Revision Identifier) */
+#define DBGMCU_IDCODE_REV_ID_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define DBGMCU_IDCODE_REV_ID_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define DBGMCU_IDCODE_REV_ID_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define DBGMCU_IDCODE_REV_ID_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+#define DBGMCU_IDCODE_REV_ID_4 ((uint32_t)0x00100000) /*!< Bit 4 */
+#define DBGMCU_IDCODE_REV_ID_5 ((uint32_t)0x00200000) /*!< Bit 5 */
+#define DBGMCU_IDCODE_REV_ID_6 ((uint32_t)0x00400000) /*!< Bit 6 */
+#define DBGMCU_IDCODE_REV_ID_7 ((uint32_t)0x00800000) /*!< Bit 7 */
+#define DBGMCU_IDCODE_REV_ID_8 ((uint32_t)0x01000000) /*!< Bit 8 */
+#define DBGMCU_IDCODE_REV_ID_9 ((uint32_t)0x02000000) /*!< Bit 9 */
+#define DBGMCU_IDCODE_REV_ID_10 ((uint32_t)0x04000000) /*!< Bit 10 */
+#define DBGMCU_IDCODE_REV_ID_11 ((uint32_t)0x08000000) /*!< Bit 11 */
+#define DBGMCU_IDCODE_REV_ID_12 ((uint32_t)0x10000000) /*!< Bit 12 */
+#define DBGMCU_IDCODE_REV_ID_13 ((uint32_t)0x20000000) /*!< Bit 13 */
+#define DBGMCU_IDCODE_REV_ID_14 ((uint32_t)0x40000000) /*!< Bit 14 */
+#define DBGMCU_IDCODE_REV_ID_15 ((uint32_t)0x80000000) /*!< Bit 15 */
+
+/****************** Bit definition for DBGMCU_CR register *******************/
+#define DBGMCU_CR_DBG_STOP ((uint32_t)0x00000002) /*!< Debug Stop Mode */
+#define DBGMCU_CR_DBG_STANDBY ((uint32_t)0x00000004) /*!< Debug Standby mode */
+
+/****************** Bit definition for DBGMCU_APB1_FZ register **************/
+#define DBGMCU_APB1_FZ_DBG_TIM3_STOP ((uint32_t)0x00000002) /*!< TIM3 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM6_STOP ((uint32_t)0x00000010) /*!< TIM6 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM14_STOP ((uint32_t)0x00000100) /*!< TIM14 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_RTC_STOP ((uint32_t)0x00000400) /*!< RTC Calendar frozen when core is halted */
+#define DBGMCU_APB1_FZ_DBG_WWDG_STOP ((uint32_t)0x00000800) /*!< Debug Window Watchdog stopped when Core is halted */
+#define DBGMCU_APB1_FZ_DBG_IWDG_STOP ((uint32_t)0x00001000) /*!< Debug Independent Watchdog stopped when Core is halted */
+#define DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00200000) /*!< I2C1 SMBUS timeout mode stopped when Core is halted */
+
+/****************** Bit definition for DBGMCU_APB2_FZ register **************/
+#define DBGMCU_APB2_FZ_DBG_TIM1_STOP ((uint32_t)0x00000800) /*!< TIM1 counter stopped when core is halted */
+#define DBGMCU_APB2_FZ_DBG_TIM15_STOP ((uint32_t)0x00010000) /*!< TIM15 counter stopped when core is halted */
+#define DBGMCU_APB2_FZ_DBG_TIM16_STOP ((uint32_t)0x00020000) /*!< TIM16 counter stopped when core is halted */
+#define DBGMCU_APB2_FZ_DBG_TIM17_STOP ((uint32_t)0x00040000) /*!< TIM17 counter stopped when core is halted */
+
+/******************************************************************************/
+/* */
+/* DMA Controller (DMA) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for DMA_ISR register ********************/
+#define DMA_ISR_GIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt flag */
+#define DMA_ISR_TCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete flag */
+#define DMA_ISR_HTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer flag */
+#define DMA_ISR_TEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error flag */
+#define DMA_ISR_GIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt flag */
+#define DMA_ISR_TCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete flag */
+#define DMA_ISR_HTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer flag */
+#define DMA_ISR_TEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error flag */
+#define DMA_ISR_GIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt flag */
+#define DMA_ISR_TCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete flag */
+#define DMA_ISR_HTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer flag */
+#define DMA_ISR_TEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error flag */
+#define DMA_ISR_GIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt flag */
+#define DMA_ISR_TCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete flag */
+#define DMA_ISR_HTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer flag */
+#define DMA_ISR_TEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error flag */
+#define DMA_ISR_GIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt flag */
+#define DMA_ISR_TCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete flag */
+#define DMA_ISR_HTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer flag */
+#define DMA_ISR_TEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error flag */
+
+/******************* Bit definition for DMA_IFCR register *******************/
+#define DMA_IFCR_CGIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt clear */
+#define DMA_IFCR_CTCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete clear */
+#define DMA_IFCR_CHTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer clear */
+#define DMA_IFCR_CTEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error clear */
+#define DMA_IFCR_CGIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt clear */
+#define DMA_IFCR_CTCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete clear */
+#define DMA_IFCR_CHTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer clear */
+#define DMA_IFCR_CTEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error clear */
+#define DMA_IFCR_CGIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt clear */
+#define DMA_IFCR_CTCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete clear */
+#define DMA_IFCR_CHTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer clear */
+#define DMA_IFCR_CTEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error clear */
+#define DMA_IFCR_CGIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt clear */
+#define DMA_IFCR_CTCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete clear */
+#define DMA_IFCR_CHTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer clear */
+#define DMA_IFCR_CTEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error clear */
+#define DMA_IFCR_CGIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt clear */
+#define DMA_IFCR_CTCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete clear */
+#define DMA_IFCR_CHTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer clear */
+#define DMA_IFCR_CTEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error clear */
+
+/******************* Bit definition for DMA_CCR register ********************/
+#define DMA_CCR_EN ((uint32_t)0x00000001) /*!< Channel enable */
+#define DMA_CCR_TCIE ((uint32_t)0x00000002) /*!< Transfer complete interrupt enable */
+#define DMA_CCR_HTIE ((uint32_t)0x00000004) /*!< Half Transfer interrupt enable */
+#define DMA_CCR_TEIE ((uint32_t)0x00000008) /*!< Transfer error interrupt enable */
+#define DMA_CCR_DIR ((uint32_t)0x00000010) /*!< Data transfer direction */
+#define DMA_CCR_CIRC ((uint32_t)0x00000020) /*!< Circular mode */
+#define DMA_CCR_PINC ((uint32_t)0x00000040) /*!< Peripheral increment mode */
+#define DMA_CCR_MINC ((uint32_t)0x00000080) /*!< Memory increment mode */
+
+#define DMA_CCR_PSIZE ((uint32_t)0x00000300) /*!< PSIZE[1:0] bits (Peripheral size) */
+#define DMA_CCR_PSIZE_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define DMA_CCR_PSIZE_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+
+#define DMA_CCR_MSIZE ((uint32_t)0x00000C00) /*!< MSIZE[1:0] bits (Memory size) */
+#define DMA_CCR_MSIZE_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define DMA_CCR_MSIZE_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+
+#define DMA_CCR_PL ((uint32_t)0x00003000) /*!< PL[1:0] bits(Channel Priority level)*/
+#define DMA_CCR_PL_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define DMA_CCR_PL_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+
+#define DMA_CCR_MEM2MEM ((uint32_t)0x00004000) /*!< Memory to memory mode */
+
+/****************** Bit definition for DMA_CNDTR register *******************/
+#define DMA_CNDTR_NDT ((uint32_t)0x0000FFFF) /*!< Number of data to Transfer */
+
+/****************** Bit definition for DMA_CPAR register ********************/
+#define DMA_CPAR_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */
+
+/****************** Bit definition for DMA_CMAR register ********************/
+#define DMA_CMAR_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */
+
+/******************************************************************************/
+/* */
+/* External Interrupt/Event Controller (EXTI) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for EXTI_IMR register *******************/
+#define EXTI_IMR_MR0 ((uint32_t)0x00000001) /*!< Interrupt Mask on line 0 */
+#define EXTI_IMR_MR1 ((uint32_t)0x00000002) /*!< Interrupt Mask on line 1 */
+#define EXTI_IMR_MR2 ((uint32_t)0x00000004) /*!< Interrupt Mask on line 2 */
+#define EXTI_IMR_MR3 ((uint32_t)0x00000008) /*!< Interrupt Mask on line 3 */
+#define EXTI_IMR_MR4 ((uint32_t)0x00000010) /*!< Interrupt Mask on line 4 */
+#define EXTI_IMR_MR5 ((uint32_t)0x00000020) /*!< Interrupt Mask on line 5 */
+#define EXTI_IMR_MR6 ((uint32_t)0x00000040) /*!< Interrupt Mask on line 6 */
+#define EXTI_IMR_MR7 ((uint32_t)0x00000080) /*!< Interrupt Mask on line 7 */
+#define EXTI_IMR_MR8 ((uint32_t)0x00000100) /*!< Interrupt Mask on line 8 */
+#define EXTI_IMR_MR9 ((uint32_t)0x00000200) /*!< Interrupt Mask on line 9 */
+#define EXTI_IMR_MR10 ((uint32_t)0x00000400) /*!< Interrupt Mask on line 10 */
+#define EXTI_IMR_MR11 ((uint32_t)0x00000800) /*!< Interrupt Mask on line 11 */
+#define EXTI_IMR_MR12 ((uint32_t)0x00001000) /*!< Interrupt Mask on line 12 */
+#define EXTI_IMR_MR13 ((uint32_t)0x00002000) /*!< Interrupt Mask on line 13 */
+#define EXTI_IMR_MR14 ((uint32_t)0x00004000) /*!< Interrupt Mask on line 14 */
+#define EXTI_IMR_MR15 ((uint32_t)0x00008000) /*!< Interrupt Mask on line 15 */
+#define EXTI_IMR_MR16 ((uint32_t)0x00010000) /*!< Interrupt Mask on line 16 */
+#define EXTI_IMR_MR17 ((uint32_t)0x00020000) /*!< Interrupt Mask on line 17 */
+#define EXTI_IMR_MR19 ((uint32_t)0x00080000) /*!< Interrupt Mask on line 19 */
+#define EXTI_IMR_MR21 ((uint32_t)0x00200000) /*!< Interrupt Mask on line 21 */
+#define EXTI_IMR_MR22 ((uint32_t)0x00400000) /*!< Interrupt Mask on line 22 */
+#define EXTI_IMR_MR23 ((uint32_t)0x00800000) /*!< Interrupt Mask on line 23 */
+#define EXTI_IMR_MR25 ((uint32_t)0x02000000) /*!< Interrupt Mask on line 25 */
+#define EXTI_IMR_MR27 ((uint32_t)0x08000000) /*!< Interrupt Mask on line 27 */
+
+/****************** Bit definition for EXTI_EMR register ********************/
+#define EXTI_EMR_MR0 ((uint32_t)0x00000001) /*!< Event Mask on line 0 */
+#define EXTI_EMR_MR1 ((uint32_t)0x00000002) /*!< Event Mask on line 1 */
+#define EXTI_EMR_MR2 ((uint32_t)0x00000004) /*!< Event Mask on line 2 */
+#define EXTI_EMR_MR3 ((uint32_t)0x00000008) /*!< Event Mask on line 3 */
+#define EXTI_EMR_MR4 ((uint32_t)0x00000010) /*!< Event Mask on line 4 */
+#define EXTI_EMR_MR5 ((uint32_t)0x00000020) /*!< Event Mask on line 5 */
+#define EXTI_EMR_MR6 ((uint32_t)0x00000040) /*!< Event Mask on line 6 */
+#define EXTI_EMR_MR7 ((uint32_t)0x00000080) /*!< Event Mask on line 7 */
+#define EXTI_EMR_MR8 ((uint32_t)0x00000100) /*!< Event Mask on line 8 */
+#define EXTI_EMR_MR9 ((uint32_t)0x00000200) /*!< Event Mask on line 9 */
+#define EXTI_EMR_MR10 ((uint32_t)0x00000400) /*!< Event Mask on line 10 */
+#define EXTI_EMR_MR11 ((uint32_t)0x00000800) /*!< Event Mask on line 11 */
+#define EXTI_EMR_MR12 ((uint32_t)0x00001000) /*!< Event Mask on line 12 */
+#define EXTI_EMR_MR13 ((uint32_t)0x00002000) /*!< Event Mask on line 13 */
+#define EXTI_EMR_MR14 ((uint32_t)0x00004000) /*!< Event Mask on line 14 */
+#define EXTI_EMR_MR15 ((uint32_t)0x00008000) /*!< Event Mask on line 15 */
+#define EXTI_EMR_MR16 ((uint32_t)0x00010000) /*!< Event Mask on line 16 */
+#define EXTI_EMR_MR17 ((uint32_t)0x00020000) /*!< Event Mask on line 17 */
+#define EXTI_EMR_MR19 ((uint32_t)0x00080000) /*!< Event Mask on line 19 */
+#define EXTI_EMR_MR21 ((uint32_t)0x00200000) /*!< Event Mask on line 21 */
+#define EXTI_EMR_MR22 ((uint32_t)0x00400000) /*!< Event Mask on line 22 */
+#define EXTI_EMR_MR23 ((uint32_t)0x00800000) /*!< Event Mask on line 23 */
+#define EXTI_EMR_MR25 ((uint32_t)0x02000000) /*!< Event Mask on line 25 */
+#define EXTI_EMR_MR27 ((uint32_t)0x08000000) /*!< Event Mask on line 27 */
+
+/******************* Bit definition for EXTI_RTSR register ******************/
+#define EXTI_RTSR_TR0 ((uint32_t)0x00000001) /*!< Rising trigger event configuration bit of line 0 */
+#define EXTI_RTSR_TR1 ((uint32_t)0x00000002) /*!< Rising trigger event configuration bit of line 1 */
+#define EXTI_RTSR_TR2 ((uint32_t)0x00000004) /*!< Rising trigger event configuration bit of line 2 */
+#define EXTI_RTSR_TR3 ((uint32_t)0x00000008) /*!< Rising trigger event configuration bit of line 3 */
+#define EXTI_RTSR_TR4 ((uint32_t)0x00000010) /*!< Rising trigger event configuration bit of line 4 */
+#define EXTI_RTSR_TR5 ((uint32_t)0x00000020) /*!< Rising trigger event configuration bit of line 5 */
+#define EXTI_RTSR_TR6 ((uint32_t)0x00000040) /*!< Rising trigger event configuration bit of line 6 */
+#define EXTI_RTSR_TR7 ((uint32_t)0x00000080) /*!< Rising trigger event configuration bit of line 7 */
+#define EXTI_RTSR_TR8 ((uint32_t)0x00000100) /*!< Rising trigger event configuration bit of line 8 */
+#define EXTI_RTSR_TR9 ((uint32_t)0x00000200) /*!< Rising trigger event configuration bit of line 9 */
+#define EXTI_RTSR_TR10 ((uint32_t)0x00000400) /*!< Rising trigger event configuration bit of line 10 */
+#define EXTI_RTSR_TR11 ((uint32_t)0x00000800) /*!< Rising trigger event configuration bit of line 11 */
+#define EXTI_RTSR_TR12 ((uint32_t)0x00001000) /*!< Rising trigger event configuration bit of line 12 */
+#define EXTI_RTSR_TR13 ((uint32_t)0x00002000) /*!< Rising trigger event configuration bit of line 13 */
+#define EXTI_RTSR_TR14 ((uint32_t)0x00004000) /*!< Rising trigger event configuration bit of line 14 */
+#define EXTI_RTSR_TR15 ((uint32_t)0x00008000) /*!< Rising trigger event configuration bit of line 15 */
+#define EXTI_RTSR_TR16 ((uint32_t)0x00010000) /*!< Rising trigger event configuration bit of line 16 */
+#define EXTI_RTSR_TR17 ((uint32_t)0x00020000) /*!< Rising trigger event configuration bit of line 17 */
+#define EXTI_RTSR_TR19 ((uint32_t)0x00080000) /*!< Rising trigger event configuration bit of line 19 */
+
+/******************* Bit definition for EXTI_FTSR register *******************/
+#define EXTI_FTSR_TR0 ((uint32_t)0x00000001) /*!< Falling trigger event configuration bit of line 0 */
+#define EXTI_FTSR_TR1 ((uint32_t)0x00000002) /*!< Falling trigger event configuration bit of line 1 */
+#define EXTI_FTSR_TR2 ((uint32_t)0x00000004) /*!< Falling trigger event configuration bit of line 2 */
+#define EXTI_FTSR_TR3 ((uint32_t)0x00000008) /*!< Falling trigger event configuration bit of line 3 */
+#define EXTI_FTSR_TR4 ((uint32_t)0x00000010) /*!< Falling trigger event configuration bit of line 4 */
+#define EXTI_FTSR_TR5 ((uint32_t)0x00000020) /*!< Falling trigger event configuration bit of line 5 */
+#define EXTI_FTSR_TR6 ((uint32_t)0x00000040) /*!< Falling trigger event configuration bit of line 6 */
+#define EXTI_FTSR_TR7 ((uint32_t)0x00000080) /*!< Falling trigger event configuration bit of line 7 */
+#define EXTI_FTSR_TR8 ((uint32_t)0x00000100) /*!< Falling trigger event configuration bit of line 8 */
+#define EXTI_FTSR_TR9 ((uint32_t)0x00000200) /*!< Falling trigger event configuration bit of line 9 */
+#define EXTI_FTSR_TR10 ((uint32_t)0x00000400) /*!< Falling trigger event configuration bit of line 10 */
+#define EXTI_FTSR_TR11 ((uint32_t)0x00000800) /*!< Falling trigger event configuration bit of line 11 */
+#define EXTI_FTSR_TR12 ((uint32_t)0x00001000) /*!< Falling trigger event configuration bit of line 12 */
+#define EXTI_FTSR_TR13 ((uint32_t)0x00002000) /*!< Falling trigger event configuration bit of line 13 */
+#define EXTI_FTSR_TR14 ((uint32_t)0x00004000) /*!< Falling trigger event configuration bit of line 14 */
+#define EXTI_FTSR_TR15 ((uint32_t)0x00008000) /*!< Falling trigger event configuration bit of line 15 */
+#define EXTI_FTSR_TR16 ((uint32_t)0x00010000) /*!< Falling trigger event configuration bit of line 16 */
+#define EXTI_FTSR_TR17 ((uint32_t)0x00020000) /*!< Falling trigger event configuration bit of line 17 */
+#define EXTI_FTSR_TR19 ((uint32_t)0x00080000) /*!< Falling trigger event configuration bit of line 19 */
+
+/******************* Bit definition for EXTI_SWIER register *******************/
+#define EXTI_SWIER_SWIER0 ((uint32_t)0x00000001) /*!< Software Interrupt on line 0 */
+#define EXTI_SWIER_SWIER1 ((uint32_t)0x00000002) /*!< Software Interrupt on line 1 */
+#define EXTI_SWIER_SWIER2 ((uint32_t)0x00000004) /*!< Software Interrupt on line 2 */
+#define EXTI_SWIER_SWIER3 ((uint32_t)0x00000008) /*!< Software Interrupt on line 3 */
+#define EXTI_SWIER_SWIER4 ((uint32_t)0x00000010) /*!< Software Interrupt on line 4 */
+#define EXTI_SWIER_SWIER5 ((uint32_t)0x00000020) /*!< Software Interrupt on line 5 */
+#define EXTI_SWIER_SWIER6 ((uint32_t)0x00000040) /*!< Software Interrupt on line 6 */
+#define EXTI_SWIER_SWIER7 ((uint32_t)0x00000080) /*!< Software Interrupt on line 7 */
+#define EXTI_SWIER_SWIER8 ((uint32_t)0x00000100) /*!< Software Interrupt on line 8 */
+#define EXTI_SWIER_SWIER9 ((uint32_t)0x00000200) /*!< Software Interrupt on line 9 */
+#define EXTI_SWIER_SWIER10 ((uint32_t)0x00000400) /*!< Software Interrupt on line 10 */
+#define EXTI_SWIER_SWIER11 ((uint32_t)0x00000800) /*!< Software Interrupt on line 11 */
+#define EXTI_SWIER_SWIER12 ((uint32_t)0x00001000) /*!< Software Interrupt on line 12 */
+#define EXTI_SWIER_SWIER13 ((uint32_t)0x00002000) /*!< Software Interrupt on line 13 */
+#define EXTI_SWIER_SWIER14 ((uint32_t)0x00004000) /*!< Software Interrupt on line 14 */
+#define EXTI_SWIER_SWIER15 ((uint32_t)0x00008000) /*!< Software Interrupt on line 15 */
+#define EXTI_SWIER_SWIER16 ((uint32_t)0x00010000) /*!< Software Interrupt on line 16 */
+#define EXTI_SWIER_SWIER17 ((uint32_t)0x00020000) /*!< Software Interrupt on line 17 */
+#define EXTI_SWIER_SWIER19 ((uint32_t)0x00080000) /*!< Software Interrupt on line 19 */
+
+/****************** Bit definition for EXTI_PR register *********************/
+#define EXTI_PR_PR0 ((uint32_t)0x00000001) /*!< Pending bit 0 */
+#define EXTI_PR_PR1 ((uint32_t)0x00000002) /*!< Pending bit 1 */
+#define EXTI_PR_PR2 ((uint32_t)0x00000004) /*!< Pending bit 2 */
+#define EXTI_PR_PR3 ((uint32_t)0x00000008) /*!< Pending bit 3 */
+#define EXTI_PR_PR4 ((uint32_t)0x00000010) /*!< Pending bit 4 */
+#define EXTI_PR_PR5 ((uint32_t)0x00000020) /*!< Pending bit 5 */
+#define EXTI_PR_PR6 ((uint32_t)0x00000040) /*!< Pending bit 6 */
+#define EXTI_PR_PR7 ((uint32_t)0x00000080) /*!< Pending bit 7 */
+#define EXTI_PR_PR8 ((uint32_t)0x00000100) /*!< Pending bit 8 */
+#define EXTI_PR_PR9 ((uint32_t)0x00000200) /*!< Pending bit 9 */
+#define EXTI_PR_PR10 ((uint32_t)0x00000400) /*!< Pending bit 10 */
+#define EXTI_PR_PR11 ((uint32_t)0x00000800) /*!< Pending bit 11 */
+#define EXTI_PR_PR12 ((uint32_t)0x00001000) /*!< Pending bit 12 */
+#define EXTI_PR_PR13 ((uint32_t)0x00002000) /*!< Pending bit 13 */
+#define EXTI_PR_PR14 ((uint32_t)0x00004000) /*!< Pending bit 14 */
+#define EXTI_PR_PR15 ((uint32_t)0x00008000) /*!< Pending bit 15 */
+#define EXTI_PR_PR16 ((uint32_t)0x00010000) /*!< Pending bit 16 */
+#define EXTI_PR_PR17 ((uint32_t)0x00020000) /*!< Pending bit 17 */
+#define EXTI_PR_PR19 ((uint32_t)0x00080000) /*!< Pending bit 19 */
+
+/******************************************************************************/
+/* */
+/* FLASH and Option Bytes Registers */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for FLASH_ACR register ******************/
+#define FLASH_ACR_LATENCY ((uint32_t)0x00000001) /*!< LATENCY bit (Latency) */
+
+#define FLASH_ACR_PRFTBE ((uint32_t)0x00000010) /*!< Prefetch Buffer Enable */
+#define FLASH_ACR_PRFTBS ((uint32_t)0x00000020) /*!< Prefetch Buffer Status */
+
+/****************** Bit definition for FLASH_KEYR register ******************/
+#define FLASH_KEYR_FKEYR ((uint32_t)0xFFFFFFFF) /*!< FPEC Key */
+
+/***************** Bit definition for FLASH_OPTKEYR register ****************/
+#define FLASH_OPTKEYR_OPTKEYR ((uint32_t)0xFFFFFFFF) /*!< Option Byte Key */
+
+/****************** FLASH Keys **********************************************/
+#define FLASH_FKEY1 ((uint32_t)0x45670123) /*!< Flash program erase key1 */
+#define FLASH_FKEY2 ((uint32_t)0xCDEF89AB) /*!< Flash program erase key2: used with FLASH_PEKEY1
+ to unlock the write access to the FPEC. */
+
+#define FLASH_OPTKEY1 ((uint32_t)0x45670123) /*!< Flash option key1 */
+#define FLASH_OPTKEY2 ((uint32_t)0xCDEF89AB) /*!< Flash option key2: used with FLASH_OPTKEY1 to
+ unlock the write access to the option byte block */
+
+/****************** Bit definition for FLASH_SR register *******************/
+#define FLASH_SR_BSY ((uint32_t)0x00000001) /*!< Busy */
+#define FLASH_SR_PGERR ((uint32_t)0x00000004) /*!< Programming Error */
+#define FLASH_SR_WRPRTERR ((uint32_t)0x00000010) /*!< Write Protection Error */
+#define FLASH_SR_EOP ((uint32_t)0x00000020) /*!< End of operation */
+#define FLASH_SR_WRPERR FLASH_SR_WRPRTERR /*!< Legacy of Write Protection Error */
+
+/******************* Bit definition for FLASH_CR register *******************/
+#define FLASH_CR_PG ((uint32_t)0x00000001) /*!< Programming */
+#define FLASH_CR_PER ((uint32_t)0x00000002) /*!< Page Erase */
+#define FLASH_CR_MER ((uint32_t)0x00000004) /*!< Mass Erase */
+#define FLASH_CR_OPTPG ((uint32_t)0x00000010) /*!< Option Byte Programming */
+#define FLASH_CR_OPTER ((uint32_t)0x00000020) /*!< Option Byte Erase */
+#define FLASH_CR_STRT ((uint32_t)0x00000040) /*!< Start */
+#define FLASH_CR_LOCK ((uint32_t)0x00000080) /*!< Lock */
+#define FLASH_CR_OPTWRE ((uint32_t)0x00000200) /*!< Option Bytes Write Enable */
+#define FLASH_CR_ERRIE ((uint32_t)0x00000400) /*!< Error Interrupt Enable */
+#define FLASH_CR_EOPIE ((uint32_t)0x00001000) /*!< End of operation interrupt enable */
+#define FLASH_CR_OBL_LAUNCH ((uint32_t)0x00002000) /*!< Option Bytes Loader Launch */
+
+/******************* Bit definition for FLASH_AR register *******************/
+#define FLASH_AR_FAR ((uint32_t)0xFFFFFFFF) /*!< Flash Address */
+
+/****************** Bit definition for FLASH_OBR register *******************/
+#define FLASH_OBR_OPTERR ((uint32_t)0x00000001) /*!< Option Byte Error */
+#define FLASH_OBR_RDPRT1 ((uint32_t)0x00000002) /*!< Read protection Level 1 */
+#define FLASH_OBR_RDPRT2 ((uint32_t)0x00000004) /*!< Read protection Level 2 */
+
+#define FLASH_OBR_USER ((uint32_t)0x00003700) /*!< User Option Bytes */
+#define FLASH_OBR_IWDG_SW ((uint32_t)0x00000100) /*!< IWDG SW */
+#define FLASH_OBR_nRST_STOP ((uint32_t)0x00000200) /*!< nRST_STOP */
+#define FLASH_OBR_nRST_STDBY ((uint32_t)0x00000400) /*!< nRST_STDBY */
+#define FLASH_OBR_nBOOT1 ((uint32_t)0x00001000) /*!< nBOOT1 */
+#define FLASH_OBR_VDDA_MONITOR ((uint32_t)0x00002000) /*!< VDDA power supply supervisor */
+
+/* Old BOOT1 bit definition, maintained for legacy purpose */
+#define FLASH_OBR_BOOT1 FLASH_OBR_nBOOT1
+
+/* Old OBR_VDDA bit definition, maintained for legacy purpose */
+#define FLASH_OBR_VDDA_ANALOG FLASH_OBR_VDDA_MONITOR
+
+/****************** Bit definition for FLASH_WRPR register ******************/
+#define FLASH_WRPR_WRP ((uint32_t)0x0000FFFF) /*!< Write Protect */
+
+/*----------------------------------------------------------------------------*/
+
+/****************** Bit definition for OB_RDP register **********************/
+#define OB_RDP_RDP ((uint32_t)0x000000FF) /*!< Read protection option byte */
+#define OB_RDP_nRDP ((uint32_t)0x0000FF00) /*!< Read protection complemented option byte */
+
+/****************** Bit definition for OB_USER register *********************/
+#define OB_USER_USER ((uint32_t)0x00FF0000) /*!< User option byte */
+#define OB_USER_nUSER ((uint32_t)0xFF000000) /*!< User complemented option byte */
+
+/****************** Bit definition for OB_WRP0 register *********************/
+#define OB_WRP0_WRP0 ((uint32_t)0x000000FF) /*!< Flash memory write protection option bytes */
+#define OB_WRP0_nWRP0 ((uint32_t)0x0000FF00) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for OB_WRP1 register *********************/
+#define OB_WRP1_WRP1 ((uint32_t)0x00FF0000) /*!< Flash memory write protection option bytes */
+#define OB_WRP1_nWRP1 ((uint32_t)0xFF000000) /*!< Flash memory write protection complemented option bytes */
+
+/******************************************************************************/
+/* */
+/* General Purpose IOs (GPIO) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for GPIO_MODER register *****************/
+#define GPIO_MODER_MODER0 ((uint32_t)0x00000003)
+#define GPIO_MODER_MODER0_0 ((uint32_t)0x00000001)
+#define GPIO_MODER_MODER0_1 ((uint32_t)0x00000002)
+#define GPIO_MODER_MODER1 ((uint32_t)0x0000000C)
+#define GPIO_MODER_MODER1_0 ((uint32_t)0x00000004)
+#define GPIO_MODER_MODER1_1 ((uint32_t)0x00000008)
+#define GPIO_MODER_MODER2 ((uint32_t)0x00000030)
+#define GPIO_MODER_MODER2_0 ((uint32_t)0x00000010)
+#define GPIO_MODER_MODER2_1 ((uint32_t)0x00000020)
+#define GPIO_MODER_MODER3 ((uint32_t)0x000000C0)
+#define GPIO_MODER_MODER3_0 ((uint32_t)0x00000040)
+#define GPIO_MODER_MODER3_1 ((uint32_t)0x00000080)
+#define GPIO_MODER_MODER4 ((uint32_t)0x00000300)
+#define GPIO_MODER_MODER4_0 ((uint32_t)0x00000100)
+#define GPIO_MODER_MODER4_1 ((uint32_t)0x00000200)
+#define GPIO_MODER_MODER5 ((uint32_t)0x00000C00)
+#define GPIO_MODER_MODER5_0 ((uint32_t)0x00000400)
+#define GPIO_MODER_MODER5_1 ((uint32_t)0x00000800)
+#define GPIO_MODER_MODER6 ((uint32_t)0x00003000)
+#define GPIO_MODER_MODER6_0 ((uint32_t)0x00001000)
+#define GPIO_MODER_MODER6_1 ((uint32_t)0x00002000)
+#define GPIO_MODER_MODER7 ((uint32_t)0x0000C000)
+#define GPIO_MODER_MODER7_0 ((uint32_t)0x00004000)
+#define GPIO_MODER_MODER7_1 ((uint32_t)0x00008000)
+#define GPIO_MODER_MODER8 ((uint32_t)0x00030000)
+#define GPIO_MODER_MODER8_0 ((uint32_t)0x00010000)
+#define GPIO_MODER_MODER8_1 ((uint32_t)0x00020000)
+#define GPIO_MODER_MODER9 ((uint32_t)0x000C0000)
+#define GPIO_MODER_MODER9_0 ((uint32_t)0x00040000)
+#define GPIO_MODER_MODER9_1 ((uint32_t)0x00080000)
+#define GPIO_MODER_MODER10 ((uint32_t)0x00300000)
+#define GPIO_MODER_MODER10_0 ((uint32_t)0x00100000)
+#define GPIO_MODER_MODER10_1 ((uint32_t)0x00200000)
+#define GPIO_MODER_MODER11 ((uint32_t)0x00C00000)
+#define GPIO_MODER_MODER11_0 ((uint32_t)0x00400000)
+#define GPIO_MODER_MODER11_1 ((uint32_t)0x00800000)
+#define GPIO_MODER_MODER12 ((uint32_t)0x03000000)
+#define GPIO_MODER_MODER12_0 ((uint32_t)0x01000000)
+#define GPIO_MODER_MODER12_1 ((uint32_t)0x02000000)
+#define GPIO_MODER_MODER13 ((uint32_t)0x0C000000)
+#define GPIO_MODER_MODER13_0 ((uint32_t)0x04000000)
+#define GPIO_MODER_MODER13_1 ((uint32_t)0x08000000)
+#define GPIO_MODER_MODER14 ((uint32_t)0x30000000)
+#define GPIO_MODER_MODER14_0 ((uint32_t)0x10000000)
+#define GPIO_MODER_MODER14_1 ((uint32_t)0x20000000)
+#define GPIO_MODER_MODER15 ((uint32_t)0xC0000000)
+#define GPIO_MODER_MODER15_0 ((uint32_t)0x40000000)
+#define GPIO_MODER_MODER15_1 ((uint32_t)0x80000000)
+
+/****************** Bit definition for GPIO_OTYPER register *****************/
+#define GPIO_OTYPER_OT_0 ((uint32_t)0x00000001)
+#define GPIO_OTYPER_OT_1 ((uint32_t)0x00000002)
+#define GPIO_OTYPER_OT_2 ((uint32_t)0x00000004)
+#define GPIO_OTYPER_OT_3 ((uint32_t)0x00000008)
+#define GPIO_OTYPER_OT_4 ((uint32_t)0x00000010)
+#define GPIO_OTYPER_OT_5 ((uint32_t)0x00000020)
+#define GPIO_OTYPER_OT_6 ((uint32_t)0x00000040)
+#define GPIO_OTYPER_OT_7 ((uint32_t)0x00000080)
+#define GPIO_OTYPER_OT_8 ((uint32_t)0x00000100)
+#define GPIO_OTYPER_OT_9 ((uint32_t)0x00000200)
+#define GPIO_OTYPER_OT_10 ((uint32_t)0x00000400)
+#define GPIO_OTYPER_OT_11 ((uint32_t)0x00000800)
+#define GPIO_OTYPER_OT_12 ((uint32_t)0x00001000)
+#define GPIO_OTYPER_OT_13 ((uint32_t)0x00002000)
+#define GPIO_OTYPER_OT_14 ((uint32_t)0x00004000)
+#define GPIO_OTYPER_OT_15 ((uint32_t)0x00008000)
+
+/**************** Bit definition for GPIO_OSPEEDR register ******************/
+#define GPIO_OSPEEDR_OSPEEDR0 ((uint32_t)0x00000003)
+#define GPIO_OSPEEDR_OSPEEDR0_0 ((uint32_t)0x00000001)
+#define GPIO_OSPEEDR_OSPEEDR0_1 ((uint32_t)0x00000002)
+#define GPIO_OSPEEDR_OSPEEDR1 ((uint32_t)0x0000000C)
+#define GPIO_OSPEEDR_OSPEEDR1_0 ((uint32_t)0x00000004)
+#define GPIO_OSPEEDR_OSPEEDR1_1 ((uint32_t)0x00000008)
+#define GPIO_OSPEEDR_OSPEEDR2 ((uint32_t)0x00000030)
+#define GPIO_OSPEEDR_OSPEEDR2_0 ((uint32_t)0x00000010)
+#define GPIO_OSPEEDR_OSPEEDR2_1 ((uint32_t)0x00000020)
+#define GPIO_OSPEEDR_OSPEEDR3 ((uint32_t)0x000000C0)
+#define GPIO_OSPEEDR_OSPEEDR3_0 ((uint32_t)0x00000040)
+#define GPIO_OSPEEDR_OSPEEDR3_1 ((uint32_t)0x00000080)
+#define GPIO_OSPEEDR_OSPEEDR4 ((uint32_t)0x00000300)
+#define GPIO_OSPEEDR_OSPEEDR4_0 ((uint32_t)0x00000100)
+#define GPIO_OSPEEDR_OSPEEDR4_1 ((uint32_t)0x00000200)
+#define GPIO_OSPEEDR_OSPEEDR5 ((uint32_t)0x00000C00)
+#define GPIO_OSPEEDR_OSPEEDR5_0 ((uint32_t)0x00000400)
+#define GPIO_OSPEEDR_OSPEEDR5_1 ((uint32_t)0x00000800)
+#define GPIO_OSPEEDR_OSPEEDR6 ((uint32_t)0x00003000)
+#define GPIO_OSPEEDR_OSPEEDR6_0 ((uint32_t)0x00001000)
+#define GPIO_OSPEEDR_OSPEEDR6_1 ((uint32_t)0x00002000)
+#define GPIO_OSPEEDR_OSPEEDR7 ((uint32_t)0x0000C000)
+#define GPIO_OSPEEDR_OSPEEDR7_0 ((uint32_t)0x00004000)
+#define GPIO_OSPEEDR_OSPEEDR7_1 ((uint32_t)0x00008000)
+#define GPIO_OSPEEDR_OSPEEDR8 ((uint32_t)0x00030000)
+#define GPIO_OSPEEDR_OSPEEDR8_0 ((uint32_t)0x00010000)
+#define GPIO_OSPEEDR_OSPEEDR8_1 ((uint32_t)0x00020000)
+#define GPIO_OSPEEDR_OSPEEDR9 ((uint32_t)0x000C0000)
+#define GPIO_OSPEEDR_OSPEEDR9_0 ((uint32_t)0x00040000)
+#define GPIO_OSPEEDR_OSPEEDR9_1 ((uint32_t)0x00080000)
+#define GPIO_OSPEEDR_OSPEEDR10 ((uint32_t)0x00300000)
+#define GPIO_OSPEEDR_OSPEEDR10_0 ((uint32_t)0x00100000)
+#define GPIO_OSPEEDR_OSPEEDR10_1 ((uint32_t)0x00200000)
+#define GPIO_OSPEEDR_OSPEEDR11 ((uint32_t)0x00C00000)
+#define GPIO_OSPEEDR_OSPEEDR11_0 ((uint32_t)0x00400000)
+#define GPIO_OSPEEDR_OSPEEDR11_1 ((uint32_t)0x00800000)
+#define GPIO_OSPEEDR_OSPEEDR12 ((uint32_t)0x03000000)
+#define GPIO_OSPEEDR_OSPEEDR12_0 ((uint32_t)0x01000000)
+#define GPIO_OSPEEDR_OSPEEDR12_1 ((uint32_t)0x02000000)
+#define GPIO_OSPEEDR_OSPEEDR13 ((uint32_t)0x0C000000)
+#define GPIO_OSPEEDR_OSPEEDR13_0 ((uint32_t)0x04000000)
+#define GPIO_OSPEEDR_OSPEEDR13_1 ((uint32_t)0x08000000)
+#define GPIO_OSPEEDR_OSPEEDR14 ((uint32_t)0x30000000)
+#define GPIO_OSPEEDR_OSPEEDR14_0 ((uint32_t)0x10000000)
+#define GPIO_OSPEEDR_OSPEEDR14_1 ((uint32_t)0x20000000)
+#define GPIO_OSPEEDR_OSPEEDR15 ((uint32_t)0xC0000000)
+#define GPIO_OSPEEDR_OSPEEDR15_0 ((uint32_t)0x40000000)
+#define GPIO_OSPEEDR_OSPEEDR15_1 ((uint32_t)0x80000000)
+
+/* Old Bit definition for GPIO_OSPEEDR register maintained for legacy purpose */
+#define GPIO_OSPEEDER_OSPEEDR0 GPIO_OSPEEDR_OSPEEDR0
+#define GPIO_OSPEEDER_OSPEEDR0_0 GPIO_OSPEEDR_OSPEEDR0_0
+#define GPIO_OSPEEDER_OSPEEDR0_1 GPIO_OSPEEDR_OSPEEDR0_1
+#define GPIO_OSPEEDER_OSPEEDR1 GPIO_OSPEEDR_OSPEEDR1
+#define GPIO_OSPEEDER_OSPEEDR1_0 GPIO_OSPEEDR_OSPEEDR1_0
+#define GPIO_OSPEEDER_OSPEEDR1_1 GPIO_OSPEEDR_OSPEEDR1_1
+#define GPIO_OSPEEDER_OSPEEDR2 GPIO_OSPEEDR_OSPEEDR2
+#define GPIO_OSPEEDER_OSPEEDR2_0 GPIO_OSPEEDR_OSPEEDR2_0
+#define GPIO_OSPEEDER_OSPEEDR2_1 GPIO_OSPEEDR_OSPEEDR2_1
+#define GPIO_OSPEEDER_OSPEEDR3 GPIO_OSPEEDR_OSPEEDR3
+#define GPIO_OSPEEDER_OSPEEDR3_0 GPIO_OSPEEDR_OSPEEDR3_0
+#define GPIO_OSPEEDER_OSPEEDR3_1 GPIO_OSPEEDR_OSPEEDR3_1
+#define GPIO_OSPEEDER_OSPEEDR4 GPIO_OSPEEDR_OSPEEDR4
+#define GPIO_OSPEEDER_OSPEEDR4_0 GPIO_OSPEEDR_OSPEEDR4_0
+#define GPIO_OSPEEDER_OSPEEDR4_1 GPIO_OSPEEDR_OSPEEDR4_1
+#define GPIO_OSPEEDER_OSPEEDR5 GPIO_OSPEEDR_OSPEEDR5
+#define GPIO_OSPEEDER_OSPEEDR5_0 GPIO_OSPEEDR_OSPEEDR5_0
+#define GPIO_OSPEEDER_OSPEEDR5_1 GPIO_OSPEEDR_OSPEEDR5_1
+#define GPIO_OSPEEDER_OSPEEDR6 GPIO_OSPEEDR_OSPEEDR6
+#define GPIO_OSPEEDER_OSPEEDR6_0 GPIO_OSPEEDR_OSPEEDR6_0
+#define GPIO_OSPEEDER_OSPEEDR6_1 GPIO_OSPEEDR_OSPEEDR6_1
+#define GPIO_OSPEEDER_OSPEEDR7 GPIO_OSPEEDR_OSPEEDR7
+#define GPIO_OSPEEDER_OSPEEDR7_0 GPIO_OSPEEDR_OSPEEDR7_0
+#define GPIO_OSPEEDER_OSPEEDR7_1 GPIO_OSPEEDR_OSPEEDR7_1
+#define GPIO_OSPEEDER_OSPEEDR8 GPIO_OSPEEDR_OSPEEDR8
+#define GPIO_OSPEEDER_OSPEEDR8_0 GPIO_OSPEEDR_OSPEEDR8_0
+#define GPIO_OSPEEDER_OSPEEDR8_1 GPIO_OSPEEDR_OSPEEDR8_1
+#define GPIO_OSPEEDER_OSPEEDR9 GPIO_OSPEEDR_OSPEEDR9
+#define GPIO_OSPEEDER_OSPEEDR9_0 GPIO_OSPEEDR_OSPEEDR9_0
+#define GPIO_OSPEEDER_OSPEEDR9_1 GPIO_OSPEEDR_OSPEEDR9_1
+#define GPIO_OSPEEDER_OSPEEDR10 GPIO_OSPEEDR_OSPEEDR10
+#define GPIO_OSPEEDER_OSPEEDR10_0 GPIO_OSPEEDR_OSPEEDR10_0
+#define GPIO_OSPEEDER_OSPEEDR10_1 GPIO_OSPEEDR_OSPEEDR10_1
+#define GPIO_OSPEEDER_OSPEEDR11 GPIO_OSPEEDR_OSPEEDR11
+#define GPIO_OSPEEDER_OSPEEDR11_0 GPIO_OSPEEDR_OSPEEDR11_0
+#define GPIO_OSPEEDER_OSPEEDR11_1 GPIO_OSPEEDR_OSPEEDR11_1
+#define GPIO_OSPEEDER_OSPEEDR12 GPIO_OSPEEDR_OSPEEDR12
+#define GPIO_OSPEEDER_OSPEEDR12_0 GPIO_OSPEEDR_OSPEEDR12_0
+#define GPIO_OSPEEDER_OSPEEDR12_1 GPIO_OSPEEDR_OSPEEDR12_1
+#define GPIO_OSPEEDER_OSPEEDR13 GPIO_OSPEEDR_OSPEEDR13
+#define GPIO_OSPEEDER_OSPEEDR13_0 GPIO_OSPEEDR_OSPEEDR13_0
+#define GPIO_OSPEEDER_OSPEEDR13_1 GPIO_OSPEEDR_OSPEEDR13_1
+#define GPIO_OSPEEDER_OSPEEDR14 GPIO_OSPEEDR_OSPEEDR14
+#define GPIO_OSPEEDER_OSPEEDR14_0 GPIO_OSPEEDR_OSPEEDR14_0
+#define GPIO_OSPEEDER_OSPEEDR14_1 GPIO_OSPEEDR_OSPEEDR14_1
+#define GPIO_OSPEEDER_OSPEEDR15 GPIO_OSPEEDR_OSPEEDR15
+#define GPIO_OSPEEDER_OSPEEDR15_0 GPIO_OSPEEDR_OSPEEDR15_0
+#define GPIO_OSPEEDER_OSPEEDR15_1 GPIO_OSPEEDR_OSPEEDR15_1
+
+/******************* Bit definition for GPIO_PUPDR register ******************/
+#define GPIO_PUPDR_PUPDR0 ((uint32_t)0x00000003)
+#define GPIO_PUPDR_PUPDR0_0 ((uint32_t)0x00000001)
+#define GPIO_PUPDR_PUPDR0_1 ((uint32_t)0x00000002)
+#define GPIO_PUPDR_PUPDR1 ((uint32_t)0x0000000C)
+#define GPIO_PUPDR_PUPDR1_0 ((uint32_t)0x00000004)
+#define GPIO_PUPDR_PUPDR1_1 ((uint32_t)0x00000008)
+#define GPIO_PUPDR_PUPDR2 ((uint32_t)0x00000030)
+#define GPIO_PUPDR_PUPDR2_0 ((uint32_t)0x00000010)
+#define GPIO_PUPDR_PUPDR2_1 ((uint32_t)0x00000020)
+#define GPIO_PUPDR_PUPDR3 ((uint32_t)0x000000C0)
+#define GPIO_PUPDR_PUPDR3_0 ((uint32_t)0x00000040)
+#define GPIO_PUPDR_PUPDR3_1 ((uint32_t)0x00000080)
+#define GPIO_PUPDR_PUPDR4 ((uint32_t)0x00000300)
+#define GPIO_PUPDR_PUPDR4_0 ((uint32_t)0x00000100)
+#define GPIO_PUPDR_PUPDR4_1 ((uint32_t)0x00000200)
+#define GPIO_PUPDR_PUPDR5 ((uint32_t)0x00000C00)
+#define GPIO_PUPDR_PUPDR5_0 ((uint32_t)0x00000400)
+#define GPIO_PUPDR_PUPDR5_1 ((uint32_t)0x00000800)
+#define GPIO_PUPDR_PUPDR6 ((uint32_t)0x00003000)
+#define GPIO_PUPDR_PUPDR6_0 ((uint32_t)0x00001000)
+#define GPIO_PUPDR_PUPDR6_1 ((uint32_t)0x00002000)
+#define GPIO_PUPDR_PUPDR7 ((uint32_t)0x0000C000)
+#define GPIO_PUPDR_PUPDR7_0 ((uint32_t)0x00004000)
+#define GPIO_PUPDR_PUPDR7_1 ((uint32_t)0x00008000)
+#define GPIO_PUPDR_PUPDR8 ((uint32_t)0x00030000)
+#define GPIO_PUPDR_PUPDR8_0 ((uint32_t)0x00010000)
+#define GPIO_PUPDR_PUPDR8_1 ((uint32_t)0x00020000)
+#define GPIO_PUPDR_PUPDR9 ((uint32_t)0x000C0000)
+#define GPIO_PUPDR_PUPDR9_0 ((uint32_t)0x00040000)
+#define GPIO_PUPDR_PUPDR9_1 ((uint32_t)0x00080000)
+#define GPIO_PUPDR_PUPDR10 ((uint32_t)0x00300000)
+#define GPIO_PUPDR_PUPDR10_0 ((uint32_t)0x00100000)
+#define GPIO_PUPDR_PUPDR10_1 ((uint32_t)0x00200000)
+#define GPIO_PUPDR_PUPDR11 ((uint32_t)0x00C00000)
+#define GPIO_PUPDR_PUPDR11_0 ((uint32_t)0x00400000)
+#define GPIO_PUPDR_PUPDR11_1 ((uint32_t)0x00800000)
+#define GPIO_PUPDR_PUPDR12 ((uint32_t)0x03000000)
+#define GPIO_PUPDR_PUPDR12_0 ((uint32_t)0x01000000)
+#define GPIO_PUPDR_PUPDR12_1 ((uint32_t)0x02000000)
+#define GPIO_PUPDR_PUPDR13 ((uint32_t)0x0C000000)
+#define GPIO_PUPDR_PUPDR13_0 ((uint32_t)0x04000000)
+#define GPIO_PUPDR_PUPDR13_1 ((uint32_t)0x08000000)
+#define GPIO_PUPDR_PUPDR14 ((uint32_t)0x30000000)
+#define GPIO_PUPDR_PUPDR14_0 ((uint32_t)0x10000000)
+#define GPIO_PUPDR_PUPDR14_1 ((uint32_t)0x20000000)
+#define GPIO_PUPDR_PUPDR15 ((uint32_t)0xC0000000)
+#define GPIO_PUPDR_PUPDR15_0 ((uint32_t)0x40000000)
+#define GPIO_PUPDR_PUPDR15_1 ((uint32_t)0x80000000)
+
+/******************* Bit definition for GPIO_IDR register *******************/
+#define GPIO_IDR_0 ((uint32_t)0x00000001)
+#define GPIO_IDR_1 ((uint32_t)0x00000002)
+#define GPIO_IDR_2 ((uint32_t)0x00000004)
+#define GPIO_IDR_3 ((uint32_t)0x00000008)
+#define GPIO_IDR_4 ((uint32_t)0x00000010)
+#define GPIO_IDR_5 ((uint32_t)0x00000020)
+#define GPIO_IDR_6 ((uint32_t)0x00000040)
+#define GPIO_IDR_7 ((uint32_t)0x00000080)
+#define GPIO_IDR_8 ((uint32_t)0x00000100)
+#define GPIO_IDR_9 ((uint32_t)0x00000200)
+#define GPIO_IDR_10 ((uint32_t)0x00000400)
+#define GPIO_IDR_11 ((uint32_t)0x00000800)
+#define GPIO_IDR_12 ((uint32_t)0x00001000)
+#define GPIO_IDR_13 ((uint32_t)0x00002000)
+#define GPIO_IDR_14 ((uint32_t)0x00004000)
+#define GPIO_IDR_15 ((uint32_t)0x00008000)
+
+/****************** Bit definition for GPIO_ODR register ********************/
+#define GPIO_ODR_0 ((uint32_t)0x00000001)
+#define GPIO_ODR_1 ((uint32_t)0x00000002)
+#define GPIO_ODR_2 ((uint32_t)0x00000004)
+#define GPIO_ODR_3 ((uint32_t)0x00000008)
+#define GPIO_ODR_4 ((uint32_t)0x00000010)
+#define GPIO_ODR_5 ((uint32_t)0x00000020)
+#define GPIO_ODR_6 ((uint32_t)0x00000040)
+#define GPIO_ODR_7 ((uint32_t)0x00000080)
+#define GPIO_ODR_8 ((uint32_t)0x00000100)
+#define GPIO_ODR_9 ((uint32_t)0x00000200)
+#define GPIO_ODR_10 ((uint32_t)0x00000400)
+#define GPIO_ODR_11 ((uint32_t)0x00000800)
+#define GPIO_ODR_12 ((uint32_t)0x00001000)
+#define GPIO_ODR_13 ((uint32_t)0x00002000)
+#define GPIO_ODR_14 ((uint32_t)0x00004000)
+#define GPIO_ODR_15 ((uint32_t)0x00008000)
+
+/****************** Bit definition for GPIO_BSRR register ********************/
+#define GPIO_BSRR_BS_0 ((uint32_t)0x00000001)
+#define GPIO_BSRR_BS_1 ((uint32_t)0x00000002)
+#define GPIO_BSRR_BS_2 ((uint32_t)0x00000004)
+#define GPIO_BSRR_BS_3 ((uint32_t)0x00000008)
+#define GPIO_BSRR_BS_4 ((uint32_t)0x00000010)
+#define GPIO_BSRR_BS_5 ((uint32_t)0x00000020)
+#define GPIO_BSRR_BS_6 ((uint32_t)0x00000040)
+#define GPIO_BSRR_BS_7 ((uint32_t)0x00000080)
+#define GPIO_BSRR_BS_8 ((uint32_t)0x00000100)
+#define GPIO_BSRR_BS_9 ((uint32_t)0x00000200)
+#define GPIO_BSRR_BS_10 ((uint32_t)0x00000400)
+#define GPIO_BSRR_BS_11 ((uint32_t)0x00000800)
+#define GPIO_BSRR_BS_12 ((uint32_t)0x00001000)
+#define GPIO_BSRR_BS_13 ((uint32_t)0x00002000)
+#define GPIO_BSRR_BS_14 ((uint32_t)0x00004000)
+#define GPIO_BSRR_BS_15 ((uint32_t)0x00008000)
+#define GPIO_BSRR_BR_0 ((uint32_t)0x00010000)
+#define GPIO_BSRR_BR_1 ((uint32_t)0x00020000)
+#define GPIO_BSRR_BR_2 ((uint32_t)0x00040000)
+#define GPIO_BSRR_BR_3 ((uint32_t)0x00080000)
+#define GPIO_BSRR_BR_4 ((uint32_t)0x00100000)
+#define GPIO_BSRR_BR_5 ((uint32_t)0x00200000)
+#define GPIO_BSRR_BR_6 ((uint32_t)0x00400000)
+#define GPIO_BSRR_BR_7 ((uint32_t)0x00800000)
+#define GPIO_BSRR_BR_8 ((uint32_t)0x01000000)
+#define GPIO_BSRR_BR_9 ((uint32_t)0x02000000)
+#define GPIO_BSRR_BR_10 ((uint32_t)0x04000000)
+#define GPIO_BSRR_BR_11 ((uint32_t)0x08000000)
+#define GPIO_BSRR_BR_12 ((uint32_t)0x10000000)
+#define GPIO_BSRR_BR_13 ((uint32_t)0x20000000)
+#define GPIO_BSRR_BR_14 ((uint32_t)0x40000000)
+#define GPIO_BSRR_BR_15 ((uint32_t)0x80000000)
+
+/****************** Bit definition for GPIO_LCKR register ********************/
+#define GPIO_LCKR_LCK0 ((uint32_t)0x00000001)
+#define GPIO_LCKR_LCK1 ((uint32_t)0x00000002)
+#define GPIO_LCKR_LCK2 ((uint32_t)0x00000004)
+#define GPIO_LCKR_LCK3 ((uint32_t)0x00000008)
+#define GPIO_LCKR_LCK4 ((uint32_t)0x00000010)
+#define GPIO_LCKR_LCK5 ((uint32_t)0x00000020)
+#define GPIO_LCKR_LCK6 ((uint32_t)0x00000040)
+#define GPIO_LCKR_LCK7 ((uint32_t)0x00000080)
+#define GPIO_LCKR_LCK8 ((uint32_t)0x00000100)
+#define GPIO_LCKR_LCK9 ((uint32_t)0x00000200)
+#define GPIO_LCKR_LCK10 ((uint32_t)0x00000400)
+#define GPIO_LCKR_LCK11 ((uint32_t)0x00000800)
+#define GPIO_LCKR_LCK12 ((uint32_t)0x00001000)
+#define GPIO_LCKR_LCK13 ((uint32_t)0x00002000)
+#define GPIO_LCKR_LCK14 ((uint32_t)0x00004000)
+#define GPIO_LCKR_LCK15 ((uint32_t)0x00008000)
+#define GPIO_LCKR_LCKK ((uint32_t)0x00010000)
+
+/****************** Bit definition for GPIO_AFRL register ********************/
+#define GPIO_AFRL_AFRL0 ((uint32_t)0x0000000F)
+#define GPIO_AFRL_AFRL1 ((uint32_t)0x000000F0)
+#define GPIO_AFRL_AFRL2 ((uint32_t)0x00000F00)
+#define GPIO_AFRL_AFRL3 ((uint32_t)0x0000F000)
+#define GPIO_AFRL_AFRL4 ((uint32_t)0x000F0000)
+#define GPIO_AFRL_AFRL5 ((uint32_t)0x00F00000)
+#define GPIO_AFRL_AFRL6 ((uint32_t)0x0F000000)
+#define GPIO_AFRL_AFRL7 ((uint32_t)0xF0000000)
+
+/****************** Bit definition for GPIO_AFRH register ********************/
+#define GPIO_AFRH_AFRH0 ((uint32_t)0x0000000F)
+#define GPIO_AFRH_AFRH1 ((uint32_t)0x000000F0)
+#define GPIO_AFRH_AFRH2 ((uint32_t)0x00000F00)
+#define GPIO_AFRH_AFRH3 ((uint32_t)0x0000F000)
+#define GPIO_AFRH_AFRH4 ((uint32_t)0x000F0000)
+#define GPIO_AFRH_AFRH5 ((uint32_t)0x00F00000)
+#define GPIO_AFRH_AFRH6 ((uint32_t)0x0F000000)
+#define GPIO_AFRH_AFRH7 ((uint32_t)0xF0000000)
+
+/****************** Bit definition for GPIO_BRR register *********************/
+#define GPIO_BRR_BR_0 ((uint32_t)0x00000001)
+#define GPIO_BRR_BR_1 ((uint32_t)0x00000002)
+#define GPIO_BRR_BR_2 ((uint32_t)0x00000004)
+#define GPIO_BRR_BR_3 ((uint32_t)0x00000008)
+#define GPIO_BRR_BR_4 ((uint32_t)0x00000010)
+#define GPIO_BRR_BR_5 ((uint32_t)0x00000020)
+#define GPIO_BRR_BR_6 ((uint32_t)0x00000040)
+#define GPIO_BRR_BR_7 ((uint32_t)0x00000080)
+#define GPIO_BRR_BR_8 ((uint32_t)0x00000100)
+#define GPIO_BRR_BR_9 ((uint32_t)0x00000200)
+#define GPIO_BRR_BR_10 ((uint32_t)0x00000400)
+#define GPIO_BRR_BR_11 ((uint32_t)0x00000800)
+#define GPIO_BRR_BR_12 ((uint32_t)0x00001000)
+#define GPIO_BRR_BR_13 ((uint32_t)0x00002000)
+#define GPIO_BRR_BR_14 ((uint32_t)0x00004000)
+#define GPIO_BRR_BR_15 ((uint32_t)0x00008000)
+
+/******************************************************************************/
+/* */
+/* Inter-integrated Circuit Interface (I2C) */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for I2C_CR1 register *******************/
+#define I2C_CR1_PE ((uint32_t)0x00000001) /*!< Peripheral enable */
+#define I2C_CR1_TXIE ((uint32_t)0x00000002) /*!< TX interrupt enable */
+#define I2C_CR1_RXIE ((uint32_t)0x00000004) /*!< RX interrupt enable */
+#define I2C_CR1_ADDRIE ((uint32_t)0x00000008) /*!< Address match interrupt enable */
+#define I2C_CR1_NACKIE ((uint32_t)0x00000010) /*!< NACK received interrupt enable */
+#define I2C_CR1_STOPIE ((uint32_t)0x00000020) /*!< STOP detection interrupt enable */
+#define I2C_CR1_TCIE ((uint32_t)0x00000040) /*!< Transfer complete interrupt enable */
+#define I2C_CR1_ERRIE ((uint32_t)0x00000080) /*!< Errors interrupt enable */
+#define I2C_CR1_DFN ((uint32_t)0x00000F00) /*!< Digital noise filter */
+#define I2C_CR1_ANFOFF ((uint32_t)0x00001000) /*!< Analog noise filter OFF */
+#define I2C_CR1_SWRST ((uint32_t)0x00002000) /*!< Software reset */
+#define I2C_CR1_TXDMAEN ((uint32_t)0x00004000) /*!< DMA transmission requests enable */
+#define I2C_CR1_RXDMAEN ((uint32_t)0x00008000) /*!< DMA reception requests enable */
+#define I2C_CR1_SBC ((uint32_t)0x00010000) /*!< Slave byte control */
+#define I2C_CR1_NOSTRETCH ((uint32_t)0x00020000) /*!< Clock stretching disable */
+#define I2C_CR1_WUPEN ((uint32_t)0x00040000) /*!< Wakeup from STOP enable */
+#define I2C_CR1_GCEN ((uint32_t)0x00080000) /*!< General call enable */
+#define I2C_CR1_SMBHEN ((uint32_t)0x00100000) /*!< SMBus host address enable */
+#define I2C_CR1_SMBDEN ((uint32_t)0x00200000) /*!< SMBus device default address enable */
+#define I2C_CR1_ALERTEN ((uint32_t)0x00400000) /*!< SMBus alert enable */
+#define I2C_CR1_PECEN ((uint32_t)0x00800000) /*!< PEC enable */
+
+/****************** Bit definition for I2C_CR2 register ********************/
+#define I2C_CR2_SADD ((uint32_t)0x000003FF) /*!< Slave address (master mode) */
+#define I2C_CR2_RD_WRN ((uint32_t)0x00000400) /*!< Transfer direction (master mode) */
+#define I2C_CR2_ADD10 ((uint32_t)0x00000800) /*!< 10-bit addressing mode (master mode) */
+#define I2C_CR2_HEAD10R ((uint32_t)0x00001000) /*!< 10-bit address header only read direction (master mode) */
+#define I2C_CR2_START ((uint32_t)0x00002000) /*!< START generation */
+#define I2C_CR2_STOP ((uint32_t)0x00004000) /*!< STOP generation (master mode) */
+#define I2C_CR2_NACK ((uint32_t)0x00008000) /*!< NACK generation (slave mode) */
+#define I2C_CR2_NBYTES ((uint32_t)0x00FF0000) /*!< Number of bytes */
+#define I2C_CR2_RELOAD ((uint32_t)0x01000000) /*!< NBYTES reload mode */
+#define I2C_CR2_AUTOEND ((uint32_t)0x02000000) /*!< Automatic end mode (master mode) */
+#define I2C_CR2_PECBYTE ((uint32_t)0x04000000) /*!< Packet error checking byte */
+
+/******************* Bit definition for I2C_OAR1 register ******************/
+#define I2C_OAR1_OA1 ((uint32_t)0x000003FF) /*!< Interface own address 1 */
+#define I2C_OAR1_OA1MODE ((uint32_t)0x00000400) /*!< Own address 1 10-bit mode */
+#define I2C_OAR1_OA1EN ((uint32_t)0x00008000) /*!< Own address 1 enable */
+
+/******************* Bit definition for I2C_OAR2 register ******************/
+#define I2C_OAR2_OA2 ((uint32_t)0x000000FE) /*!< Interface own address 2 */
+#define I2C_OAR2_OA2MSK ((uint32_t)0x00000700) /*!< Own address 2 masks */
+#define I2C_OAR2_OA2EN ((uint32_t)0x00008000) /*!< Own address 2 enable */
+
+/******************* Bit definition for I2C_TIMINGR register ****************/
+#define I2C_TIMINGR_SCLL ((uint32_t)0x000000FF) /*!< SCL low period (master mode) */
+#define I2C_TIMINGR_SCLH ((uint32_t)0x0000FF00) /*!< SCL high period (master mode) */
+#define I2C_TIMINGR_SDADEL ((uint32_t)0x000F0000) /*!< Data hold time */
+#define I2C_TIMINGR_SCLDEL ((uint32_t)0x00F00000) /*!< Data setup time */
+#define I2C_TIMINGR_PRESC ((uint32_t)0xF0000000) /*!< Timings prescaler */
+
+/******************* Bit definition for I2C_TIMEOUTR register ****************/
+#define I2C_TIMEOUTR_TIMEOUTA ((uint32_t)0x00000FFF) /*!< Bus timeout A */
+#define I2C_TIMEOUTR_TIDLE ((uint32_t)0x00001000) /*!< Idle clock timeout detection */
+#define I2C_TIMEOUTR_TIMOUTEN ((uint32_t)0x00008000) /*!< Clock timeout enable */
+#define I2C_TIMEOUTR_TIMEOUTB ((uint32_t)0x0FFF0000) /*!< Bus timeout B*/
+#define I2C_TIMEOUTR_TEXTEN ((uint32_t)0x80000000) /*!< Extended clock timeout enable */
+
+/****************** Bit definition for I2C_ISR register ********************/
+#define I2C_ISR_TXE ((uint32_t)0x00000001) /*!< Transmit data register empty */
+#define I2C_ISR_TXIS ((uint32_t)0x00000002) /*!< Transmit interrupt status */
+#define I2C_ISR_RXNE ((uint32_t)0x00000004) /*!< Receive data register not empty */
+#define I2C_ISR_ADDR ((uint32_t)0x00000008) /*!< Address matched (slave mode)*/
+#define I2C_ISR_NACKF ((uint32_t)0x00000010) /*!< NACK received flag */
+#define I2C_ISR_STOPF ((uint32_t)0x00000020) /*!< STOP detection flag */
+#define I2C_ISR_TC ((uint32_t)0x00000040) /*!< Transfer complete (master mode) */
+#define I2C_ISR_TCR ((uint32_t)0x00000080) /*!< Transfer complete reload */
+#define I2C_ISR_BERR ((uint32_t)0x00000100) /*!< Bus error */
+#define I2C_ISR_ARLO ((uint32_t)0x00000200) /*!< Arbitration lost */
+#define I2C_ISR_OVR ((uint32_t)0x00000400) /*!< Overrun/Underrun */
+#define I2C_ISR_PECERR ((uint32_t)0x00000800) /*!< PEC error in reception */
+#define I2C_ISR_TIMEOUT ((uint32_t)0x00001000) /*!< Timeout or Tlow detection flag */
+#define I2C_ISR_ALERT ((uint32_t)0x00002000) /*!< SMBus alert */
+#define I2C_ISR_BUSY ((uint32_t)0x00008000) /*!< Bus busy */
+#define I2C_ISR_DIR ((uint32_t)0x00010000) /*!< Transfer direction (slave mode) */
+#define I2C_ISR_ADDCODE ((uint32_t)0x00FE0000) /*!< Address match code (slave mode) */
+
+/****************** Bit definition for I2C_ICR register ********************/
+#define I2C_ICR_ADDRCF ((uint32_t)0x00000008) /*!< Address matched clear flag */
+#define I2C_ICR_NACKCF ((uint32_t)0x00000010) /*!< NACK clear flag */
+#define I2C_ICR_STOPCF ((uint32_t)0x00000020) /*!< STOP detection clear flag */
+#define I2C_ICR_BERRCF ((uint32_t)0x00000100) /*!< Bus error clear flag */
+#define I2C_ICR_ARLOCF ((uint32_t)0x00000200) /*!< Arbitration lost clear flag */
+#define I2C_ICR_OVRCF ((uint32_t)0x00000400) /*!< Overrun/Underrun clear flag */
+#define I2C_ICR_PECCF ((uint32_t)0x00000800) /*!< PAC error clear flag */
+#define I2C_ICR_TIMOUTCF ((uint32_t)0x00001000) /*!< Timeout clear flag */
+#define I2C_ICR_ALERTCF ((uint32_t)0x00002000) /*!< Alert clear flag */
+
+/****************** Bit definition for I2C_PECR register *******************/
+#define I2C_PECR_PEC ((uint32_t)0x000000FF) /*!< PEC register */
+
+/****************** Bit definition for I2C_RXDR register *********************/
+#define I2C_RXDR_RXDATA ((uint32_t)0x000000FF) /*!< 8-bit receive data */
+
+/****************** Bit definition for I2C_TXDR register *******************/
+#define I2C_TXDR_TXDATA ((uint32_t)0x000000FF) /*!< 8-bit transmit data */
+
+/*****************************************************************************/
+/* */
+/* Independent WATCHDOG (IWDG) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for IWDG_KR register *******************/
+#define IWDG_KR_KEY ((uint32_t)0xFFFF) /*!< Key value (write only, read 0000h) */
+
+/******************* Bit definition for IWDG_PR register *******************/
+#define IWDG_PR_PR ((uint32_t)0x07) /*!< PR[2:0] (Prescaler divider) */
+#define IWDG_PR_PR_0 ((uint32_t)0x01) /*!< Bit 0 */
+#define IWDG_PR_PR_1 ((uint32_t)0x02) /*!< Bit 1 */
+#define IWDG_PR_PR_2 ((uint32_t)0x04) /*!< Bit 2 */
+
+/******************* Bit definition for IWDG_RLR register ******************/
+#define IWDG_RLR_RL ((uint32_t)0x0FFF) /*!< Watchdog counter reload value */
+
+/******************* Bit definition for IWDG_SR register *******************/
+#define IWDG_SR_PVU ((uint32_t)0x01) /*!< Watchdog prescaler value update */
+#define IWDG_SR_RVU ((uint32_t)0x02) /*!< Watchdog counter reload value update */
+#define IWDG_SR_WVU ((uint32_t)0x04) /*!< Watchdog counter window value update */
+
+/******************* Bit definition for IWDG_KR register *******************/
+#define IWDG_WINR_WIN ((uint32_t)0x0FFF) /*!< Watchdog counter window value */
+
+/*****************************************************************************/
+/* */
+/* Power Control (PWR) */
+/* */
+/*****************************************************************************/
+
+/******************** Bit definition for PWR_CR register *******************/
+#define PWR_CR_LPDS ((uint32_t)0x00000001) /*!< Low-power Deepsleep */
+#define PWR_CR_PDDS ((uint32_t)0x00000002) /*!< Power Down Deepsleep */
+#define PWR_CR_CWUF ((uint32_t)0x00000004) /*!< Clear Wakeup Flag */
+#define PWR_CR_CSBF ((uint32_t)0x00000008) /*!< Clear Standby Flag */
+#define PWR_CR_DBP ((uint32_t)0x00000100) /*!< Disable Backup Domain write protection */
+
+/******************* Bit definition for PWR_CSR register *******************/
+#define PWR_CSR_WUF ((uint32_t)0x00000001) /*!< Wakeup Flag */
+#define PWR_CSR_SBF ((uint32_t)0x00000002) /*!< Standby Flag */
+#define PWR_CSR_EWUP1 ((uint32_t)0x00000100) /*!< Enable WKUP pin 1 */
+#define PWR_CSR_EWUP2 ((uint32_t)0x00000200) /*!< Enable WKUP pin 2 */
+
+/*****************************************************************************/
+/* */
+/* Reset and Clock Control */
+/* */
+/*****************************************************************************/
+
+/******************** Bit definition for RCC_CR register *******************/
+#define RCC_CR_HSION ((uint32_t)0x00000001) /*!< Internal High Speed clock enable */
+#define RCC_CR_HSIRDY ((uint32_t)0x00000002) /*!< Internal High Speed clock ready flag */
+
+#define RCC_CR_HSITRIM ((uint32_t)0x000000F8) /*!< Internal High Speed clock trimming */
+#define RCC_CR_HSITRIM_0 ((uint32_t)0x00000008) /*!<Bit 0 */
+#define RCC_CR_HSITRIM_1 ((uint32_t)0x00000010) /*!<Bit 1 */
+#define RCC_CR_HSITRIM_2 ((uint32_t)0x00000020) /*!<Bit 2 */
+#define RCC_CR_HSITRIM_3 ((uint32_t)0x00000040) /*!<Bit 3 */
+#define RCC_CR_HSITRIM_4 ((uint32_t)0x00000080) /*!<Bit 4 */
+
+#define RCC_CR_HSICAL ((uint32_t)0x0000FF00) /*!< Internal High Speed clock Calibration */
+#define RCC_CR_HSICAL_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define RCC_CR_HSICAL_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define RCC_CR_HSICAL_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define RCC_CR_HSICAL_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define RCC_CR_HSICAL_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+#define RCC_CR_HSICAL_5 ((uint32_t)0x00002000) /*!<Bit 5 */
+#define RCC_CR_HSICAL_6 ((uint32_t)0x00004000) /*!<Bit 6 */
+#define RCC_CR_HSICAL_7 ((uint32_t)0x00008000) /*!<Bit 7 */
+
+#define RCC_CR_HSEON ((uint32_t)0x00010000) /*!< External High Speed clock enable */
+#define RCC_CR_HSERDY ((uint32_t)0x00020000) /*!< External High Speed clock ready flag */
+#define RCC_CR_HSEBYP ((uint32_t)0x00040000) /*!< External High Speed clock Bypass */
+#define RCC_CR_CSSON ((uint32_t)0x00080000) /*!< Clock Security System enable */
+#define RCC_CR_PLLON ((uint32_t)0x01000000) /*!< PLL enable */
+#define RCC_CR_PLLRDY ((uint32_t)0x02000000) /*!< PLL clock ready flag */
+
+/******************** Bit definition for RCC_CFGR register *****************/
+/*!< SW configuration */
+#define RCC_CFGR_SW ((uint32_t)0x00000003) /*!< SW[1:0] bits (System clock Switch) */
+#define RCC_CFGR_SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR_SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+#define RCC_CFGR_SW_HSI ((uint32_t)0x00000000) /*!< HSI selected as system clock */
+#define RCC_CFGR_SW_HSE ((uint32_t)0x00000001) /*!< HSE selected as system clock */
+#define RCC_CFGR_SW_PLL ((uint32_t)0x00000002) /*!< PLL selected as system clock */
+
+/*!< SWS configuration */
+#define RCC_CFGR_SWS ((uint32_t)0x0000000C) /*!< SWS[1:0] bits (System Clock Switch Status) */
+#define RCC_CFGR_SWS_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define RCC_CFGR_SWS_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+
+#define RCC_CFGR_SWS_HSI ((uint32_t)0x00000000) /*!< HSI oscillator used as system clock */
+#define RCC_CFGR_SWS_HSE ((uint32_t)0x00000004) /*!< HSE oscillator used as system clock */
+#define RCC_CFGR_SWS_PLL ((uint32_t)0x00000008) /*!< PLL used as system clock */
+
+/*!< HPRE configuration */
+#define RCC_CFGR_HPRE ((uint32_t)0x000000F0) /*!< HPRE[3:0] bits (AHB prescaler) */
+#define RCC_CFGR_HPRE_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define RCC_CFGR_HPRE_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define RCC_CFGR_HPRE_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+#define RCC_CFGR_HPRE_3 ((uint32_t)0x00000080) /*!< Bit 3 */
+
+#define RCC_CFGR_HPRE_DIV1 ((uint32_t)0x00000000) /*!< SYSCLK not divided */
+#define RCC_CFGR_HPRE_DIV2 ((uint32_t)0x00000080) /*!< SYSCLK divided by 2 */
+#define RCC_CFGR_HPRE_DIV4 ((uint32_t)0x00000090) /*!< SYSCLK divided by 4 */
+#define RCC_CFGR_HPRE_DIV8 ((uint32_t)0x000000A0) /*!< SYSCLK divided by 8 */
+#define RCC_CFGR_HPRE_DIV16 ((uint32_t)0x000000B0) /*!< SYSCLK divided by 16 */
+#define RCC_CFGR_HPRE_DIV64 ((uint32_t)0x000000C0) /*!< SYSCLK divided by 64 */
+#define RCC_CFGR_HPRE_DIV128 ((uint32_t)0x000000D0) /*!< SYSCLK divided by 128 */
+#define RCC_CFGR_HPRE_DIV256 ((uint32_t)0x000000E0) /*!< SYSCLK divided by 256 */
+#define RCC_CFGR_HPRE_DIV512 ((uint32_t)0x000000F0) /*!< SYSCLK divided by 512 */
+
+/*!< PPRE configuration */
+#define RCC_CFGR_PPRE ((uint32_t)0x00000700) /*!< PRE[2:0] bits (APB prescaler) */
+#define RCC_CFGR_PPRE_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define RCC_CFGR_PPRE_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define RCC_CFGR_PPRE_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+
+#define RCC_CFGR_PPRE_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */
+#define RCC_CFGR_PPRE_DIV2 ((uint32_t)0x00000400) /*!< HCLK divided by 2 */
+#define RCC_CFGR_PPRE_DIV4 ((uint32_t)0x00000500) /*!< HCLK divided by 4 */
+#define RCC_CFGR_PPRE_DIV8 ((uint32_t)0x00000600) /*!< HCLK divided by 8 */
+#define RCC_CFGR_PPRE_DIV16 ((uint32_t)0x00000700) /*!< HCLK divided by 16 */
+
+/*!< ADCPPRE configuration */
+#define RCC_CFGR_ADCPRE ((uint32_t)0x00004000) /*!< ADCPRE bit (ADC prescaler) */
+
+#define RCC_CFGR_ADCPRE_DIV2 ((uint32_t)0x00000000) /*!< PCLK divided by 2 */
+#define RCC_CFGR_ADCPRE_DIV4 ((uint32_t)0x00004000) /*!< PCLK divided by 4 */
+
+#define RCC_CFGR_PLLSRC ((uint32_t)0x00010000) /*!< PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSI_DIV2 ((uint32_t)0x00000000) /*!< HSI clock divided by 2 selected as PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSE_PREDIV ((uint32_t)0x00010000) /*!< HSE/PREDIV clock selected as PLL entry clock source */
+
+#define RCC_CFGR_PLLXTPRE ((uint32_t)0x00020000) /*!< HSE divider for PLL entry */
+#define RCC_CFGR_PLLXTPRE_HSE_PREDIV_DIV1 ((uint32_t)0x00000000) /*!< HSE/PREDIV clock not divided for PLL entry */
+#define RCC_CFGR_PLLXTPRE_HSE_PREDIV_DIV2 ((uint32_t)0x00020000) /*!< HSE/PREDIV clock divided by 2 for PLL entry */
+
+/*!< PLLMUL configuration */
+#define RCC_CFGR_PLLMUL ((uint32_t)0x003C0000) /*!< PLLMUL[3:0] bits (PLL multiplication factor) */
+#define RCC_CFGR_PLLMUL_0 ((uint32_t)0x00040000) /*!< Bit 0 */
+#define RCC_CFGR_PLLMUL_1 ((uint32_t)0x00080000) /*!< Bit 1 */
+#define RCC_CFGR_PLLMUL_2 ((uint32_t)0x00100000) /*!< Bit 2 */
+#define RCC_CFGR_PLLMUL_3 ((uint32_t)0x00200000) /*!< Bit 3 */
+
+#define RCC_CFGR_PLLMUL2 ((uint32_t)0x00000000) /*!< PLL input clock*2 */
+#define RCC_CFGR_PLLMUL3 ((uint32_t)0x00040000) /*!< PLL input clock*3 */
+#define RCC_CFGR_PLLMUL4 ((uint32_t)0x00080000) /*!< PLL input clock*4 */
+#define RCC_CFGR_PLLMUL5 ((uint32_t)0x000C0000) /*!< PLL input clock*5 */
+#define RCC_CFGR_PLLMUL6 ((uint32_t)0x00100000) /*!< PLL input clock*6 */
+#define RCC_CFGR_PLLMUL7 ((uint32_t)0x00140000) /*!< PLL input clock*7 */
+#define RCC_CFGR_PLLMUL8 ((uint32_t)0x00180000) /*!< PLL input clock*8 */
+#define RCC_CFGR_PLLMUL9 ((uint32_t)0x001C0000) /*!< PLL input clock*9 */
+#define RCC_CFGR_PLLMUL10 ((uint32_t)0x00200000) /*!< PLL input clock10 */
+#define RCC_CFGR_PLLMUL11 ((uint32_t)0x00240000) /*!< PLL input clock*11 */
+#define RCC_CFGR_PLLMUL12 ((uint32_t)0x00280000) /*!< PLL input clock*12 */
+#define RCC_CFGR_PLLMUL13 ((uint32_t)0x002C0000) /*!< PLL input clock*13 */
+#define RCC_CFGR_PLLMUL14 ((uint32_t)0x00300000) /*!< PLL input clock*14 */
+#define RCC_CFGR_PLLMUL15 ((uint32_t)0x00340000) /*!< PLL input clock*15 */
+#define RCC_CFGR_PLLMUL16 ((uint32_t)0x00380000) /*!< PLL input clock*16 */
+
+/*!< MCO configuration */
+#define RCC_CFGR_MCO ((uint32_t)0x0F000000) /*!< MCO[3:0] bits (Microcontroller Clock Output) */
+#define RCC_CFGR_MCO_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define RCC_CFGR_MCO_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define RCC_CFGR_MCO_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+#define RCC_CFGR_MCO_3 ((uint32_t)0x08000000) /*!< Bit 3 */
+
+#define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
+#define RCC_CFGR_MCO_HSI14 ((uint32_t)0x01000000) /*!< HSI14 clock selected as MCO source */
+#define RCC_CFGR_MCO_LSI ((uint32_t)0x02000000) /*!< LSI clock selected as MCO source */
+#define RCC_CFGR_MCO_LSE ((uint32_t)0x03000000) /*!< LSE clock selected as MCO source */
+#define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x04000000) /*!< System clock selected as MCO source */
+#define RCC_CFGR_MCO_HSI ((uint32_t)0x05000000) /*!< HSI clock selected as MCO source */
+#define RCC_CFGR_MCO_HSE ((uint32_t)0x06000000) /*!< HSE clock selected as MCO source */
+#define RCC_CFGR_MCO_PLL ((uint32_t)0x07000000) /*!< PLL clock divided by 2 selected as MCO source */
+
+/*!<****************** Bit definition for RCC_CIR register *****************/
+#define RCC_CIR_LSIRDYF ((uint32_t)0x00000001) /*!< LSI Ready Interrupt flag */
+#define RCC_CIR_LSERDYF ((uint32_t)0x00000002) /*!< LSE Ready Interrupt flag */
+#define RCC_CIR_HSIRDYF ((uint32_t)0x00000004) /*!< HSI Ready Interrupt flag */
+#define RCC_CIR_HSERDYF ((uint32_t)0x00000008) /*!< HSE Ready Interrupt flag */
+#define RCC_CIR_PLLRDYF ((uint32_t)0x00000010) /*!< PLL Ready Interrupt flag */
+#define RCC_CIR_HSI14RDYF ((uint32_t)0x00000020) /*!< HSI14 Ready Interrupt flag */
+#define RCC_CIR_CSSF ((uint32_t)0x00000080) /*!< Clock Security System Interrupt flag */
+#define RCC_CIR_LSIRDYIE ((uint32_t)0x00000100) /*!< LSI Ready Interrupt Enable */
+#define RCC_CIR_LSERDYIE ((uint32_t)0x00000200) /*!< LSE Ready Interrupt Enable */
+#define RCC_CIR_HSIRDYIE ((uint32_t)0x00000400) /*!< HSI Ready Interrupt Enable */
+#define RCC_CIR_HSERDYIE ((uint32_t)0x00000800) /*!< HSE Ready Interrupt Enable */
+#define RCC_CIR_PLLRDYIE ((uint32_t)0x00001000) /*!< PLL Ready Interrupt Enable */
+#define RCC_CIR_HSI14RDYIE ((uint32_t)0x00002000) /*!< HSI14 Ready Interrupt Enable */
+#define RCC_CIR_LSIRDYC ((uint32_t)0x00010000) /*!< LSI Ready Interrupt Clear */
+#define RCC_CIR_LSERDYC ((uint32_t)0x00020000) /*!< LSE Ready Interrupt Clear */
+#define RCC_CIR_HSIRDYC ((uint32_t)0x00040000) /*!< HSI Ready Interrupt Clear */
+#define RCC_CIR_HSERDYC ((uint32_t)0x00080000) /*!< HSE Ready Interrupt Clear */
+#define RCC_CIR_PLLRDYC ((uint32_t)0x00100000) /*!< PLL Ready Interrupt Clear */
+#define RCC_CIR_HSI14RDYC ((uint32_t)0x00200000) /*!< HSI14 Ready Interrupt Clear */
+#define RCC_CIR_CSSC ((uint32_t)0x00800000) /*!< Clock Security System Interrupt Clear */
+
+/***************** Bit definition for RCC_APB2RSTR register ****************/
+#define RCC_APB2RSTR_SYSCFGRST ((uint32_t)0x00000001) /*!< SYSCFG clock reset */
+#define RCC_APB2RSTR_ADCRST ((uint32_t)0x00000200) /*!< ADC clock reset */
+#define RCC_APB2RSTR_TIM1RST ((uint32_t)0x00000800) /*!< TIM1 clock reset */
+#define RCC_APB2RSTR_SPI1RST ((uint32_t)0x00001000) /*!< SPI1 clock reset */
+#define RCC_APB2RSTR_USART1RST ((uint32_t)0x00004000) /*!< USART1 clock reset */
+#define RCC_APB2RSTR_TIM15RST ((uint32_t)0x00010000) /*!< TIM15 clock reset */
+#define RCC_APB2RSTR_TIM16RST ((uint32_t)0x00020000) /*!< TIM16 clock reset */
+#define RCC_APB2RSTR_TIM17RST ((uint32_t)0x00040000) /*!< TIM17 clock reset */
+#define RCC_APB2RSTR_DBGMCURST ((uint32_t)0x00400000) /*!< DBGMCU clock reset */
+
+/*!< Old ADC1 clock reset bit definition maintained for legacy purpose */
+#define RCC_APB2RSTR_ADC1RST RCC_APB2RSTR_ADCRST
+
+/***************** Bit definition for RCC_APB1RSTR register ****************/
+#define RCC_APB1RSTR_TIM3RST ((uint32_t)0x00000002) /*!< Timer 3 clock reset */
+#define RCC_APB1RSTR_TIM6RST ((uint32_t)0x00000010) /*!< Timer 6 clock reset */
+#define RCC_APB1RSTR_TIM14RST ((uint32_t)0x00000100) /*!< Timer 14 clock reset */
+#define RCC_APB1RSTR_WWDGRST ((uint32_t)0x00000800) /*!< Window Watchdog clock reset */
+#define RCC_APB1RSTR_SPI2RST ((uint32_t)0x00004000) /*!< SPI2 clock reset */
+#define RCC_APB1RSTR_USART2RST ((uint32_t)0x00020000) /*!< USART 2 clock reset */
+#define RCC_APB1RSTR_I2C1RST ((uint32_t)0x00200000) /*!< I2C 1 clock reset */
+#define RCC_APB1RSTR_I2C2RST ((uint32_t)0x00400000) /*!< I2C 2 clock reset */
+#define RCC_APB1RSTR_PWRRST ((uint32_t)0x10000000) /*!< PWR clock reset */
+
+/****************** Bit definition for RCC_AHBENR register *****************/
+#define RCC_AHBENR_DMAEN ((uint32_t)0x00000001) /*!< DMA1 clock enable */
+#define RCC_AHBENR_SRAMEN ((uint32_t)0x00000004) /*!< SRAM interface clock enable */
+#define RCC_AHBENR_FLITFEN ((uint32_t)0x00000010) /*!< FLITF clock enable */
+#define RCC_AHBENR_CRCEN ((uint32_t)0x00000040) /*!< CRC clock enable */
+#define RCC_AHBENR_GPIOAEN ((uint32_t)0x00020000) /*!< GPIOA clock enable */
+#define RCC_AHBENR_GPIOBEN ((uint32_t)0x00040000) /*!< GPIOB clock enable */
+#define RCC_AHBENR_GPIOCEN ((uint32_t)0x00080000) /*!< GPIOC clock enable */
+#define RCC_AHBENR_GPIODEN ((uint32_t)0x00100000) /*!< GPIOD clock enable */
+#define RCC_AHBENR_GPIOFEN ((uint32_t)0x00400000) /*!< GPIOF clock enable */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_AHBENR_DMA1EN RCC_AHBENR_DMAEN /*!< DMA1 clock enable */
+#define RCC_AHBENR_TSEN RCC_AHBENR_TSCEN /*!< TS clock enable */
+
+/***************** Bit definition for RCC_APB2ENR register *****************/
+#define RCC_APB2ENR_SYSCFGCOMPEN ((uint32_t)0x00000001) /*!< SYSCFG and comparator clock enable */
+#define RCC_APB2ENR_ADCEN ((uint32_t)0x00000200) /*!< ADC1 clock enable */
+#define RCC_APB2ENR_TIM1EN ((uint32_t)0x00000800) /*!< TIM1 clock enable */
+#define RCC_APB2ENR_SPI1EN ((uint32_t)0x00001000) /*!< SPI1 clock enable */
+#define RCC_APB2ENR_USART1EN ((uint32_t)0x00004000) /*!< USART1 clock enable */
+#define RCC_APB2ENR_TIM15EN ((uint32_t)0x00010000) /*!< TIM15 clock enable */
+#define RCC_APB2ENR_TIM16EN ((uint32_t)0x00020000) /*!< TIM16 clock enable */
+#define RCC_APB2ENR_TIM17EN ((uint32_t)0x00040000) /*!< TIM17 clock enable */
+#define RCC_APB2ENR_DBGMCUEN ((uint32_t)0x00400000) /*!< DBGMCU clock enable */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_APB2ENR_SYSCFGEN RCC_APB2ENR_SYSCFGCOMPEN /*!< SYSCFG clock enable */
+#define RCC_APB2ENR_ADC1EN RCC_APB2ENR_ADCEN /*!< ADC1 clock enable */
+
+/***************** Bit definition for RCC_APB1ENR register *****************/
+#define RCC_APB1ENR_TIM3EN ((uint32_t)0x00000002) /*!< Timer 3 clock enable */
+#define RCC_APB1ENR_TIM6EN ((uint32_t)0x00000010) /*!< Timer 6 clock enable */
+#define RCC_APB1ENR_TIM14EN ((uint32_t)0x00000100) /*!< Timer 14 clock enable */
+#define RCC_APB1ENR_WWDGEN ((uint32_t)0x00000800) /*!< Window Watchdog clock enable */
+#define RCC_APB1ENR_SPI2EN ((uint32_t)0x00004000) /*!< SPI2 clock enable */
+#define RCC_APB1ENR_USART2EN ((uint32_t)0x00020000) /*!< USART2 clock enable */
+#define RCC_APB1ENR_I2C1EN ((uint32_t)0x00200000) /*!< I2C1 clock enable */
+#define RCC_APB1ENR_I2C2EN ((uint32_t)0x00400000) /*!< I2C2 clock enable */
+#define RCC_APB1ENR_PWREN ((uint32_t)0x10000000) /*!< PWR clock enable */
+
+/******************* Bit definition for RCC_BDCR register ******************/
+#define RCC_BDCR_LSEON ((uint32_t)0x00000001) /*!< External Low Speed oscillator enable */
+#define RCC_BDCR_LSERDY ((uint32_t)0x00000002) /*!< External Low Speed oscillator Ready */
+#define RCC_BDCR_LSEBYP ((uint32_t)0x00000004) /*!< External Low Speed oscillator Bypass */
+
+#define RCC_BDCR_LSEDRV ((uint32_t)0x00000018) /*!< LSEDRV[1:0] bits (LSE Osc. drive capability) */
+#define RCC_BDCR_LSEDRV_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define RCC_BDCR_LSEDRV_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+
+#define RCC_BDCR_RTCSEL ((uint32_t)0x00000300) /*!< RTCSEL[1:0] bits (RTC clock source selection) */
+#define RCC_BDCR_RTCSEL_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define RCC_BDCR_RTCSEL_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+
+/*!< RTC configuration */
+#define RCC_BDCR_RTCSEL_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
+#define RCC_BDCR_RTCSEL_LSE ((uint32_t)0x00000100) /*!< LSE oscillator clock used as RTC clock */
+#define RCC_BDCR_RTCSEL_LSI ((uint32_t)0x00000200) /*!< LSI oscillator clock used as RTC clock */
+#define RCC_BDCR_RTCSEL_HSE ((uint32_t)0x00000300) /*!< HSE oscillator clock divided by 128 used as RTC clock */
+
+#define RCC_BDCR_RTCEN ((uint32_t)0x00008000) /*!< RTC clock enable */
+#define RCC_BDCR_BDRST ((uint32_t)0x00010000) /*!< Backup domain software reset */
+
+/******************* Bit definition for RCC_CSR register *******************/
+#define RCC_CSR_LSION ((uint32_t)0x00000001) /*!< Internal Low Speed oscillator enable */
+#define RCC_CSR_LSIRDY ((uint32_t)0x00000002) /*!< Internal Low Speed oscillator Ready */
+#define RCC_CSR_V18PWRRSTF ((uint32_t)0x00800000) /*!< V1.8 power domain reset flag */
+#define RCC_CSR_RMVF ((uint32_t)0x01000000) /*!< Remove reset flag */
+#define RCC_CSR_OBLRSTF ((uint32_t)0x02000000) /*!< OBL reset flag */
+#define RCC_CSR_PINRSTF ((uint32_t)0x04000000) /*!< PIN reset flag */
+#define RCC_CSR_PORRSTF ((uint32_t)0x08000000) /*!< POR/PDR reset flag */
+#define RCC_CSR_SFTRSTF ((uint32_t)0x10000000) /*!< Software Reset flag */
+#define RCC_CSR_IWDGRSTF ((uint32_t)0x20000000) /*!< Independent Watchdog reset flag */
+#define RCC_CSR_WWDGRSTF ((uint32_t)0x40000000) /*!< Window watchdog reset flag */
+#define RCC_CSR_LPWRRSTF ((uint32_t)0x80000000) /*!< Low-Power reset flag */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_CSR_OBL RCC_CSR_OBLRSTF /*!< OBL reset flag */
+
+/******************* Bit definition for RCC_AHBRSTR register ***************/
+#define RCC_AHBRSTR_GPIOARST ((uint32_t)0x00020000) /*!< GPIOA clock reset */
+#define RCC_AHBRSTR_GPIOBRST ((uint32_t)0x00040000) /*!< GPIOB clock reset */
+#define RCC_AHBRSTR_GPIOCRST ((uint32_t)0x00080000) /*!< GPIOC clock reset */
+#define RCC_AHBRSTR_GPIODRST ((uint32_t)0x00100000) /*!< GPIOD clock reset */
+#define RCC_AHBRSTR_GPIOFRST ((uint32_t)0x00400000) /*!< GPIOF clock reset */
+
+/******************* Bit definition for RCC_CFGR2 register *****************/
+/*!< PREDIV configuration */
+#define RCC_CFGR2_PREDIV ((uint32_t)0x0000000F) /*!< PREDIV[3:0] bits */
+#define RCC_CFGR2_PREDIV_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR2_PREDIV_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define RCC_CFGR2_PREDIV_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define RCC_CFGR2_PREDIV_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+
+#define RCC_CFGR2_PREDIV_DIV1 ((uint32_t)0x00000000) /*!< PREDIV input clock not divided */
+#define RCC_CFGR2_PREDIV_DIV2 ((uint32_t)0x00000001) /*!< PREDIV input clock divided by 2 */
+#define RCC_CFGR2_PREDIV_DIV3 ((uint32_t)0x00000002) /*!< PREDIV input clock divided by 3 */
+#define RCC_CFGR2_PREDIV_DIV4 ((uint32_t)0x00000003) /*!< PREDIV input clock divided by 4 */
+#define RCC_CFGR2_PREDIV_DIV5 ((uint32_t)0x00000004) /*!< PREDIV input clock divided by 5 */
+#define RCC_CFGR2_PREDIV_DIV6 ((uint32_t)0x00000005) /*!< PREDIV input clock divided by 6 */
+#define RCC_CFGR2_PREDIV_DIV7 ((uint32_t)0x00000006) /*!< PREDIV input clock divided by 7 */
+#define RCC_CFGR2_PREDIV_DIV8 ((uint32_t)0x00000007) /*!< PREDIV input clock divided by 8 */
+#define RCC_CFGR2_PREDIV_DIV9 ((uint32_t)0x00000008) /*!< PREDIV input clock divided by 9 */
+#define RCC_CFGR2_PREDIV_DIV10 ((uint32_t)0x00000009) /*!< PREDIV input clock divided by 10 */
+#define RCC_CFGR2_PREDIV_DIV11 ((uint32_t)0x0000000A) /*!< PREDIV input clock divided by 11 */
+#define RCC_CFGR2_PREDIV_DIV12 ((uint32_t)0x0000000B) /*!< PREDIV input clock divided by 12 */
+#define RCC_CFGR2_PREDIV_DIV13 ((uint32_t)0x0000000C) /*!< PREDIV input clock divided by 13 */
+#define RCC_CFGR2_PREDIV_DIV14 ((uint32_t)0x0000000D) /*!< PREDIV input clock divided by 14 */
+#define RCC_CFGR2_PREDIV_DIV15 ((uint32_t)0x0000000E) /*!< PREDIV input clock divided by 15 */
+#define RCC_CFGR2_PREDIV_DIV16 ((uint32_t)0x0000000F) /*!< PREDIV input clock divided by 16 */
+
+/******************* Bit definition for RCC_CFGR3 register *****************/
+/*!< USART1 Clock source selection */
+#define RCC_CFGR3_USART1SW ((uint32_t)0x00000003) /*!< USART1SW[1:0] bits */
+#define RCC_CFGR3_USART1SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR3_USART1SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+#define RCC_CFGR3_USART1SW_PCLK ((uint32_t)0x00000000) /*!< PCLK clock used as USART1 clock source */
+#define RCC_CFGR3_USART1SW_SYSCLK ((uint32_t)0x00000001) /*!< System clock selected as USART1 clock source */
+#define RCC_CFGR3_USART1SW_LSE ((uint32_t)0x00000002) /*!< LSE oscillator clock used as USART1 clock source */
+#define RCC_CFGR3_USART1SW_HSI ((uint32_t)0x00000003) /*!< HSI oscillator clock used as USART1 clock source */
+
+/*!< I2C1 Clock source selection */
+#define RCC_CFGR3_I2C1SW ((uint32_t)0x00000010) /*!< I2C1SW bits */
+
+#define RCC_CFGR3_I2C1SW_HSI ((uint32_t)0x00000000) /*!< HSI oscillator clock used as I2C1 clock source */
+#define RCC_CFGR3_I2C1SW_SYSCLK ((uint32_t)0x00000010) /*!< System clock selected as I2C1 clock source */
+
+/*!< USART2 Clock source selection */
+#define RCC_CFGR3_USART2SW ((uint32_t)0x00030000) /*!< USART2SW[1:0] bits */
+#define RCC_CFGR3_USART2SW_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define RCC_CFGR3_USART2SW_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+
+#define RCC_CFGR3_USART2SW_PCLK ((uint32_t)0x00000000) /*!< PCLK clock used as USART2 clock source */
+#define RCC_CFGR3_USART2SW_SYSCLK ((uint32_t)0x00010000) /*!< System clock selected as USART2 clock source */
+#define RCC_CFGR3_USART2SW_LSE ((uint32_t)0x00020000) /*!< LSE oscillator clock used as USART2 clock source */
+#define RCC_CFGR3_USART2SW_HSI ((uint32_t)0x00030000) /*!< HSI oscillator clock used as USART2 clock source */
+
+/******************* Bit definition for RCC_CR2 register *******************/
+#define RCC_CR2_HSI14ON ((uint32_t)0x00000001) /*!< Internal High Speed 14MHz clock enable */
+#define RCC_CR2_HSI14RDY ((uint32_t)0x00000002) /*!< Internal High Speed 14MHz clock ready flag */
+#define RCC_CR2_HSI14DIS ((uint32_t)0x00000004) /*!< Internal High Speed 14MHz clock disable */
+#define RCC_CR2_HSI14TRIM ((uint32_t)0x000000F8) /*!< Internal High Speed 14MHz clock trimming */
+#define RCC_CR2_HSI14CAL ((uint32_t)0x0000FF00) /*!< Internal High Speed 14MHz clock Calibration */
+
+/*****************************************************************************/
+/* */
+/* Real-Time Clock (RTC) */
+/* */
+/*****************************************************************************/
+/******************** Bits definition for RTC_TR register ******************/
+#define RTC_TR_PM ((uint32_t)0x00400000)
+#define RTC_TR_HT ((uint32_t)0x00300000)
+#define RTC_TR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TR_HU ((uint32_t)0x000F0000)
+#define RTC_TR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TR_MNT ((uint32_t)0x00007000)
+#define RTC_TR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TR_MNU ((uint32_t)0x00000F00)
+#define RTC_TR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TR_ST ((uint32_t)0x00000070)
+#define RTC_TR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TR_SU ((uint32_t)0x0000000F)
+#define RTC_TR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_DR register ******************/
+#define RTC_DR_YT ((uint32_t)0x00F00000)
+#define RTC_DR_YT_0 ((uint32_t)0x00100000)
+#define RTC_DR_YT_1 ((uint32_t)0x00200000)
+#define RTC_DR_YT_2 ((uint32_t)0x00400000)
+#define RTC_DR_YT_3 ((uint32_t)0x00800000)
+#define RTC_DR_YU ((uint32_t)0x000F0000)
+#define RTC_DR_YU_0 ((uint32_t)0x00010000)
+#define RTC_DR_YU_1 ((uint32_t)0x00020000)
+#define RTC_DR_YU_2 ((uint32_t)0x00040000)
+#define RTC_DR_YU_3 ((uint32_t)0x00080000)
+#define RTC_DR_WDU ((uint32_t)0x0000E000)
+#define RTC_DR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_DR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_DR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_DR_MT ((uint32_t)0x00001000)
+#define RTC_DR_MU ((uint32_t)0x00000F00)
+#define RTC_DR_MU_0 ((uint32_t)0x00000100)
+#define RTC_DR_MU_1 ((uint32_t)0x00000200)
+#define RTC_DR_MU_2 ((uint32_t)0x00000400)
+#define RTC_DR_MU_3 ((uint32_t)0x00000800)
+#define RTC_DR_DT ((uint32_t)0x00000030)
+#define RTC_DR_DT_0 ((uint32_t)0x00000010)
+#define RTC_DR_DT_1 ((uint32_t)0x00000020)
+#define RTC_DR_DU ((uint32_t)0x0000000F)
+#define RTC_DR_DU_0 ((uint32_t)0x00000001)
+#define RTC_DR_DU_1 ((uint32_t)0x00000002)
+#define RTC_DR_DU_2 ((uint32_t)0x00000004)
+#define RTC_DR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_CR register ******************/
+#define RTC_CR_COE ((uint32_t)0x00800000)
+#define RTC_CR_OSEL ((uint32_t)0x00600000)
+#define RTC_CR_OSEL_0 ((uint32_t)0x00200000)
+#define RTC_CR_OSEL_1 ((uint32_t)0x00400000)
+#define RTC_CR_POL ((uint32_t)0x00100000)
+#define RTC_CR_COSEL ((uint32_t)0x00080000)
+#define RTC_CR_BCK ((uint32_t)0x00040000)
+#define RTC_CR_SUB1H ((uint32_t)0x00020000)
+#define RTC_CR_ADD1H ((uint32_t)0x00010000)
+#define RTC_CR_TSIE ((uint32_t)0x00008000)
+#define RTC_CR_ALRAIE ((uint32_t)0x00001000)
+#define RTC_CR_TSE ((uint32_t)0x00000800)
+#define RTC_CR_ALRAE ((uint32_t)0x00000100)
+#define RTC_CR_FMT ((uint32_t)0x00000040)
+#define RTC_CR_BYPSHAD ((uint32_t)0x00000020)
+#define RTC_CR_REFCKON ((uint32_t)0x00000010)
+#define RTC_CR_TSEDGE ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_ISR register *****************/
+#define RTC_ISR_RECALPF ((uint32_t)0x00010000)
+#define RTC_ISR_TAMP2F ((uint32_t)0x00004000)
+#define RTC_ISR_TAMP1F ((uint32_t)0x00002000)
+#define RTC_ISR_TSOVF ((uint32_t)0x00001000)
+#define RTC_ISR_TSF ((uint32_t)0x00000800)
+#define RTC_ISR_ALRAF ((uint32_t)0x00000100)
+#define RTC_ISR_INIT ((uint32_t)0x00000080)
+#define RTC_ISR_INITF ((uint32_t)0x00000040)
+#define RTC_ISR_RSF ((uint32_t)0x00000020)
+#define RTC_ISR_INITS ((uint32_t)0x00000010)
+#define RTC_ISR_SHPF ((uint32_t)0x00000008)
+#define RTC_ISR_ALRAWF ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_PRER register ****************/
+#define RTC_PRER_PREDIV_A ((uint32_t)0x007F0000)
+#define RTC_PRER_PREDIV_S ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_ALRMAR register **************/
+#define RTC_ALRMAR_MSK4 ((uint32_t)0x80000000)
+#define RTC_ALRMAR_WDSEL ((uint32_t)0x40000000)
+#define RTC_ALRMAR_DT ((uint32_t)0x30000000)
+#define RTC_ALRMAR_DT_0 ((uint32_t)0x10000000)
+#define RTC_ALRMAR_DT_1 ((uint32_t)0x20000000)
+#define RTC_ALRMAR_DU ((uint32_t)0x0F000000)
+#define RTC_ALRMAR_DU_0 ((uint32_t)0x01000000)
+#define RTC_ALRMAR_DU_1 ((uint32_t)0x02000000)
+#define RTC_ALRMAR_DU_2 ((uint32_t)0x04000000)
+#define RTC_ALRMAR_DU_3 ((uint32_t)0x08000000)
+#define RTC_ALRMAR_MSK3 ((uint32_t)0x00800000)
+#define RTC_ALRMAR_PM ((uint32_t)0x00400000)
+#define RTC_ALRMAR_HT ((uint32_t)0x00300000)
+#define RTC_ALRMAR_HT_0 ((uint32_t)0x00100000)
+#define RTC_ALRMAR_HT_1 ((uint32_t)0x00200000)
+#define RTC_ALRMAR_HU ((uint32_t)0x000F0000)
+#define RTC_ALRMAR_HU_0 ((uint32_t)0x00010000)
+#define RTC_ALRMAR_HU_1 ((uint32_t)0x00020000)
+#define RTC_ALRMAR_HU_2 ((uint32_t)0x00040000)
+#define RTC_ALRMAR_HU_3 ((uint32_t)0x00080000)
+#define RTC_ALRMAR_MSK2 ((uint32_t)0x00008000)
+#define RTC_ALRMAR_MNT ((uint32_t)0x00007000)
+#define RTC_ALRMAR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_ALRMAR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_ALRMAR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_ALRMAR_MNU ((uint32_t)0x00000F00)
+#define RTC_ALRMAR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_ALRMAR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_ALRMAR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_ALRMAR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_ALRMAR_MSK1 ((uint32_t)0x00000080)
+#define RTC_ALRMAR_ST ((uint32_t)0x00000070)
+#define RTC_ALRMAR_ST_0 ((uint32_t)0x00000010)
+#define RTC_ALRMAR_ST_1 ((uint32_t)0x00000020)
+#define RTC_ALRMAR_ST_2 ((uint32_t)0x00000040)
+#define RTC_ALRMAR_SU ((uint32_t)0x0000000F)
+#define RTC_ALRMAR_SU_0 ((uint32_t)0x00000001)
+#define RTC_ALRMAR_SU_1 ((uint32_t)0x00000002)
+#define RTC_ALRMAR_SU_2 ((uint32_t)0x00000004)
+#define RTC_ALRMAR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_WPR register *****************/
+#define RTC_WPR_KEY ((uint32_t)0x000000FF)
+
+/******************** Bits definition for RTC_SSR register *****************/
+#define RTC_SSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_SHIFTR register **************/
+#define RTC_SHIFTR_SUBFS ((uint32_t)0x00007FFF)
+#define RTC_SHIFTR_ADD1S ((uint32_t)0x80000000)
+
+/******************** Bits definition for RTC_TSTR register ****************/
+#define RTC_TSTR_PM ((uint32_t)0x00400000)
+#define RTC_TSTR_HT ((uint32_t)0x00300000)
+#define RTC_TSTR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TSTR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TSTR_HU ((uint32_t)0x000F0000)
+#define RTC_TSTR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TSTR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TSTR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TSTR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TSTR_MNT ((uint32_t)0x00007000)
+#define RTC_TSTR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TSTR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TSTR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TSTR_MNU ((uint32_t)0x00000F00)
+#define RTC_TSTR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TSTR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TSTR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TSTR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TSTR_ST ((uint32_t)0x00000070)
+#define RTC_TSTR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TSTR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TSTR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TSTR_SU ((uint32_t)0x0000000F)
+#define RTC_TSTR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TSTR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TSTR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TSTR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSDR register ****************/
+#define RTC_TSDR_WDU ((uint32_t)0x0000E000)
+#define RTC_TSDR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_TSDR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_TSDR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_TSDR_MT ((uint32_t)0x00001000)
+#define RTC_TSDR_MU ((uint32_t)0x00000F00)
+#define RTC_TSDR_MU_0 ((uint32_t)0x00000100)
+#define RTC_TSDR_MU_1 ((uint32_t)0x00000200)
+#define RTC_TSDR_MU_2 ((uint32_t)0x00000400)
+#define RTC_TSDR_MU_3 ((uint32_t)0x00000800)
+#define RTC_TSDR_DT ((uint32_t)0x00000030)
+#define RTC_TSDR_DT_0 ((uint32_t)0x00000010)
+#define RTC_TSDR_DT_1 ((uint32_t)0x00000020)
+#define RTC_TSDR_DU ((uint32_t)0x0000000F)
+#define RTC_TSDR_DU_0 ((uint32_t)0x00000001)
+#define RTC_TSDR_DU_1 ((uint32_t)0x00000002)
+#define RTC_TSDR_DU_2 ((uint32_t)0x00000004)
+#define RTC_TSDR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSSSR register ***************/
+#define RTC_TSSSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_CALR register ****************/
+#define RTC_CALR_CALP ((uint32_t)0x00008000)
+#define RTC_CALR_CALW8 ((uint32_t)0x00004000)
+#define RTC_CALR_CALW16 ((uint32_t)0x00002000)
+#define RTC_CALR_CALM ((uint32_t)0x000001FF)
+#define RTC_CALR_CALM_0 ((uint32_t)0x00000001)
+#define RTC_CALR_CALM_1 ((uint32_t)0x00000002)
+#define RTC_CALR_CALM_2 ((uint32_t)0x00000004)
+#define RTC_CALR_CALM_3 ((uint32_t)0x00000008)
+#define RTC_CALR_CALM_4 ((uint32_t)0x00000010)
+#define RTC_CALR_CALM_5 ((uint32_t)0x00000020)
+#define RTC_CALR_CALM_6 ((uint32_t)0x00000040)
+#define RTC_CALR_CALM_7 ((uint32_t)0x00000080)
+#define RTC_CALR_CALM_8 ((uint32_t)0x00000100)
+
+/******************** Bits definition for RTC_TAFCR register ***************/
+#define RTC_TAFCR_ALARMOUTTYPE ((uint32_t)0x00040000)
+#define RTC_TAFCR_TAMPPUDIS ((uint32_t)0x00008000)
+#define RTC_TAFCR_TAMPPRCH ((uint32_t)0x00006000)
+#define RTC_TAFCR_TAMPPRCH_0 ((uint32_t)0x00002000)
+#define RTC_TAFCR_TAMPPRCH_1 ((uint32_t)0x00004000)
+#define RTC_TAFCR_TAMPFLT ((uint32_t)0x00001800)
+#define RTC_TAFCR_TAMPFLT_0 ((uint32_t)0x00000800)
+#define RTC_TAFCR_TAMPFLT_1 ((uint32_t)0x00001000)
+#define RTC_TAFCR_TAMPFREQ ((uint32_t)0x00000700)
+#define RTC_TAFCR_TAMPFREQ_0 ((uint32_t)0x00000100)
+#define RTC_TAFCR_TAMPFREQ_1 ((uint32_t)0x00000200)
+#define RTC_TAFCR_TAMPFREQ_2 ((uint32_t)0x00000400)
+#define RTC_TAFCR_TAMPTS ((uint32_t)0x00000080)
+#define RTC_TAFCR_TAMP2TRG ((uint32_t)0x00000010)
+#define RTC_TAFCR_TAMP2E ((uint32_t)0x00000008)
+#define RTC_TAFCR_TAMPIE ((uint32_t)0x00000004)
+#define RTC_TAFCR_TAMP1TRG ((uint32_t)0x00000002)
+#define RTC_TAFCR_TAMP1E ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_ALRMASSR register ************/
+#define RTC_ALRMASSR_MASKSS ((uint32_t)0x0F000000)
+#define RTC_ALRMASSR_MASKSS_0 ((uint32_t)0x01000000)
+#define RTC_ALRMASSR_MASKSS_1 ((uint32_t)0x02000000)
+#define RTC_ALRMASSR_MASKSS_2 ((uint32_t)0x04000000)
+#define RTC_ALRMASSR_MASKSS_3 ((uint32_t)0x08000000)
+#define RTC_ALRMASSR_SS ((uint32_t)0x00007FFF)
+
+/*****************************************************************************/
+/* */
+/* Serial Peripheral Interface (SPI) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for SPI_CR1 register *******************/
+#define SPI_CR1_CPHA ((uint32_t)0x00000001) /*!< Clock Phase */
+#define SPI_CR1_CPOL ((uint32_t)0x00000002) /*!< Clock Polarity */
+#define SPI_CR1_MSTR ((uint32_t)0x00000004) /*!< Master Selection */
+#define SPI_CR1_BR ((uint32_t)0x00000038) /*!< BR[2:0] bits (Baud Rate Control) */
+#define SPI_CR1_BR_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define SPI_CR1_BR_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define SPI_CR1_BR_2 ((uint32_t)0x00000020) /*!< Bit 2 */
+#define SPI_CR1_SPE ((uint32_t)0x00000040) /*!< SPI Enable */
+#define SPI_CR1_LSBFIRST ((uint32_t)0x00000080) /*!< Frame Format */
+#define SPI_CR1_SSI ((uint32_t)0x00000100) /*!< Internal slave select */
+#define SPI_CR1_SSM ((uint32_t)0x00000200) /*!< Software slave management */
+#define SPI_CR1_RXONLY ((uint32_t)0x00000400) /*!< Receive only */
+#define SPI_CR1_CRCL ((uint32_t)0x00000800) /*!< CRC Length */
+#define SPI_CR1_CRCNEXT ((uint32_t)0x00001000) /*!< Transmit CRC next */
+#define SPI_CR1_CRCEN ((uint32_t)0x00002000) /*!< Hardware CRC calculation enable */
+#define SPI_CR1_BIDIOE ((uint32_t)0x00004000) /*!< Output enable in bidirectional mode */
+#define SPI_CR1_BIDIMODE ((uint32_t)0x00008000) /*!< Bidirectional data mode enable */
+
+/******************* Bit definition for SPI_CR2 register *******************/
+#define SPI_CR2_RXDMAEN ((uint32_t)0x00000001) /*!< Rx Buffer DMA Enable */
+#define SPI_CR2_TXDMAEN ((uint32_t)0x00000002) /*!< Tx Buffer DMA Enable */
+#define SPI_CR2_SSOE ((uint32_t)0x00000004) /*!< SS Output Enable */
+#define SPI_CR2_NSSP ((uint32_t)0x00000008) /*!< NSS pulse management Enable */
+#define SPI_CR2_FRF ((uint32_t)0x00000010) /*!< Frame Format Enable */
+#define SPI_CR2_ERRIE ((uint32_t)0x00000020) /*!< Error Interrupt Enable */
+#define SPI_CR2_RXNEIE ((uint32_t)0x00000040) /*!< RX buffer Not Empty Interrupt Enable */
+#define SPI_CR2_TXEIE ((uint32_t)0x00000080) /*!< Tx buffer Empty Interrupt Enable */
+#define SPI_CR2_DS ((uint32_t)0x00000F00) /*!< DS[3:0] Data Size */
+#define SPI_CR2_DS_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define SPI_CR2_DS_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define SPI_CR2_DS_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define SPI_CR2_DS_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+#define SPI_CR2_FRXTH ((uint32_t)0x00001000) /*!< FIFO reception Threshold */
+#define SPI_CR2_LDMARX ((uint32_t)0x00002000) /*!< Last DMA transfer for reception */
+#define SPI_CR2_LDMATX ((uint32_t)0x00004000) /*!< Last DMA transfer for transmission */
+
+/******************** Bit definition for SPI_SR register *******************/
+#define SPI_SR_RXNE ((uint32_t)0x00000001) /*!< Receive buffer Not Empty */
+#define SPI_SR_TXE ((uint32_t)0x00000002) /*!< Transmit buffer Empty */
+#define SPI_SR_CHSIDE ((uint32_t)0x00000004) /*!< Channel side */
+#define SPI_SR_UDR ((uint32_t)0x00000008) /*!< Underrun flag */
+#define SPI_SR_CRCERR ((uint32_t)0x00000010) /*!< CRC Error flag */
+#define SPI_SR_MODF ((uint32_t)0x00000020) /*!< Mode fault */
+#define SPI_SR_OVR ((uint32_t)0x00000040) /*!< Overrun flag */
+#define SPI_SR_BSY ((uint32_t)0x00000080) /*!< Busy flag */
+#define SPI_SR_FRE ((uint32_t)0x00000100) /*!< TI frame format error */
+#define SPI_SR_FRLVL ((uint32_t)0x00000600) /*!< FIFO Reception Level */
+#define SPI_SR_FRLVL_0 ((uint32_t)0x00000200) /*!< Bit 0 */
+#define SPI_SR_FRLVL_1 ((uint32_t)0x00000400) /*!< Bit 1 */
+#define SPI_SR_FTLVL ((uint32_t)0x00001800) /*!< FIFO Transmission Level */
+#define SPI_SR_FTLVL_0 ((uint32_t)0x00000800) /*!< Bit 0 */
+#define SPI_SR_FTLVL_1 ((uint32_t)0x00001000) /*!< Bit 1 */
+
+/******************** Bit definition for SPI_DR register *******************/
+#define SPI_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data Register */
+
+/******************* Bit definition for SPI_CRCPR register *****************/
+#define SPI_CRCPR_CRCPOLY ((uint32_t)0xFFFFFFFF) /*!< CRC polynomial register */
+
+/****************** Bit definition for SPI_RXCRCR register *****************/
+#define SPI_RXCRCR_RXCRC ((uint32_t)0xFFFFFFFF) /*!< Rx CRC Register */
+
+/****************** Bit definition for SPI_TXCRCR register *****************/
+#define SPI_TXCRCR_TXCRC ((uint32_t)0xFFFFFFFF) /*!< Tx CRC Register */
+
+/****************** Bit definition for SPI_I2SCFGR register ****************/
+#define SPI_I2SCFGR_CHLEN ((uint32_t)0x00000001) /*!<Channel length (number of bits per audio channel) */
+#define SPI_I2SCFGR_DATLEN ((uint32_t)0x00000006) /*!<DATLEN[1:0] bits (Data length to be transferred) */
+#define SPI_I2SCFGR_DATLEN_0 ((uint32_t)0x00000002) /*!<Bit 0 */
+#define SPI_I2SCFGR_DATLEN_1 ((uint32_t)0x00000004) /*!<Bit 1 */
+#define SPI_I2SCFGR_CKPOL ((uint32_t)0x00000008) /*!<steady state clock polarity */
+#define SPI_I2SCFGR_I2SSTD ((uint32_t)0x00000030) /*!<I2SSTD[1:0] bits (I2S standard selection) */
+#define SPI_I2SCFGR_I2SSTD_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SSTD_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define SPI_I2SCFGR_PCMSYNC ((uint32_t)0x00000080) /*!<PCM frame synchronization */
+#define SPI_I2SCFGR_I2SCFG ((uint32_t)0x00000300) /*!<I2SCFG[1:0] bits (I2S configuration mode) */
+#define SPI_I2SCFGR_I2SCFG_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SCFG_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define SPI_I2SCFGR_I2SE ((uint32_t)0x00000400) /*!<I2S Enable */
+#define SPI_I2SCFGR_I2SMOD ((uint32_t)0x00000800) /*!<I2S mode selection */
+
+/****************** Bit definition for SPI_I2SPR register ******************/
+#define SPI_I2SPR_I2SDIV ((uint32_t)0x000000FF) /*!<I2S Linear prescaler */
+#define SPI_I2SPR_ODD ((uint32_t)0x00000100) /*!<Odd factor for the prescaler */
+#define SPI_I2SPR_MCKOE ((uint32_t)0x00000200) /*!<Master Clock Output Enable */
+
+/*****************************************************************************/
+/* */
+/* System Configuration (SYSCFG) */
+/* */
+/*****************************************************************************/
+/***************** Bit definition for SYSCFG_CFGR1 register ****************/
+#define SYSCFG_CFGR1_MEM_MODE ((uint32_t)0x00000003) /*!< SYSCFG_Memory Remap Config */
+#define SYSCFG_CFGR1_MEM_MODE_0 ((uint32_t)0x00000001) /*!< SYSCFG_Memory Remap Config Bit 0 */
+#define SYSCFG_CFGR1_MEM_MODE_1 ((uint32_t)0x00000002) /*!< SYSCFG_Memory Remap Config Bit 1 */
+
+#define SYSCFG_CFGR1_DMA_RMP ((uint32_t)0x00001F00) /*!< DMA remap mask */
+#define SYSCFG_CFGR1_ADC_DMA_RMP ((uint32_t)0x00000100) /*!< ADC DMA remap */
+#define SYSCFG_CFGR1_USART1TX_DMA_RMP ((uint32_t)0x00000200) /*!< USART1 TX DMA remap */
+#define SYSCFG_CFGR1_USART1RX_DMA_RMP ((uint32_t)0x00000400) /*!< USART1 RX DMA remap */
+#define SYSCFG_CFGR1_TIM16_DMA_RMP ((uint32_t)0x00000800) /*!< Timer 16 DMA remap */
+#define SYSCFG_CFGR1_TIM17_DMA_RMP ((uint32_t)0x00001000) /*!< Timer 17 DMA remap */
+
+#define SYSCFG_CFGR1_I2C_FMP_PB6 ((uint32_t)0x00010000) /*!< I2C PB6 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB7 ((uint32_t)0x00020000) /*!< I2C PB7 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB8 ((uint32_t)0x00040000) /*!< I2C PB8 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB9 ((uint32_t)0x00080000) /*!< I2C PB9 Fast mode plus */
+
+/***************** Bit definition for SYSCFG_EXTICR1 register **************/
+#define SYSCFG_EXTICR1_EXTI0 ((uint16_t)0x000F) /*!< EXTI 0 configuration */
+#define SYSCFG_EXTICR1_EXTI1 ((uint16_t)0x00F0) /*!< EXTI 1 configuration */
+#define SYSCFG_EXTICR1_EXTI2 ((uint16_t)0x0F00) /*!< EXTI 2 configuration */
+#define SYSCFG_EXTICR1_EXTI3 ((uint16_t)0xF000) /*!< EXTI 3 configuration */
+
+/**
+ * @brief EXTI0 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI0_PA ((uint16_t)0x0000) /*!< PA[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PB ((uint16_t)0x0001) /*!< PB[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PC ((uint16_t)0x0002) /*!< PC[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PD ((uint16_t)0x0003) /*!< PD[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PF ((uint16_t)0x0005) /*!< PF[0] pin */
+
+/**
+ * @brief EXTI1 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI1_PA ((uint16_t)0x0000) /*!< PA[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PB ((uint16_t)0x0010) /*!< PB[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PC ((uint16_t)0x0020) /*!< PC[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PD ((uint16_t)0x0030) /*!< PD[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PF ((uint16_t)0x0050) /*!< PF[1] pin */
+
+/**
+ * @brief EXTI2 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI2_PA ((uint16_t)0x0000) /*!< PA[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PB ((uint16_t)0x0100) /*!< PB[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PC ((uint16_t)0x0200) /*!< PC[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PD ((uint16_t)0x0300) /*!< PD[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PF ((uint16_t)0x0500) /*!< PF[2] pin */
+
+/**
+ * @brief EXTI3 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI3_PA ((uint16_t)0x0000) /*!< PA[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PB ((uint16_t)0x1000) /*!< PB[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PC ((uint16_t)0x2000) /*!< PC[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PD ((uint16_t)0x3000) /*!< PD[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PF ((uint16_t)0x5000) /*!< PF[3] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR2 register **************/
+#define SYSCFG_EXTICR2_EXTI4 ((uint16_t)0x000F) /*!< EXTI 4 configuration */
+#define SYSCFG_EXTICR2_EXTI5 ((uint16_t)0x00F0) /*!< EXTI 5 configuration */
+#define SYSCFG_EXTICR2_EXTI6 ((uint16_t)0x0F00) /*!< EXTI 6 configuration */
+#define SYSCFG_EXTICR2_EXTI7 ((uint16_t)0xF000) /*!< EXTI 7 configuration */
+
+/**
+ * @brief EXTI4 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI4_PA ((uint16_t)0x0000) /*!< PA[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PB ((uint16_t)0x0001) /*!< PB[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PC ((uint16_t)0x0002) /*!< PC[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PD ((uint16_t)0x0003) /*!< PD[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PF ((uint16_t)0x0005) /*!< PF[4] pin */
+
+/**
+ * @brief EXTI5 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI5_PA ((uint16_t)0x0000) /*!< PA[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PB ((uint16_t)0x0010) /*!< PB[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PC ((uint16_t)0x0020) /*!< PC[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PD ((uint16_t)0x0030) /*!< PD[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PF ((uint16_t)0x0050) /*!< PF[5] pin */
+
+/**
+ * @brief EXTI6 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI6_PA ((uint16_t)0x0000) /*!< PA[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PB ((uint16_t)0x0100) /*!< PB[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PC ((uint16_t)0x0200) /*!< PC[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PD ((uint16_t)0x0300) /*!< PD[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PF ((uint16_t)0x0500) /*!< PF[6] pin */
+
+/**
+ * @brief EXTI7 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI7_PA ((uint16_t)0x0000) /*!< PA[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PB ((uint16_t)0x1000) /*!< PB[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PC ((uint16_t)0x2000) /*!< PC[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PD ((uint16_t)0x3000) /*!< PD[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PF ((uint16_t)0x5000) /*!< PF[7] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR3 register **************/
+#define SYSCFG_EXTICR3_EXTI8 ((uint16_t)0x000F) /*!< EXTI 8 configuration */
+#define SYSCFG_EXTICR3_EXTI9 ((uint16_t)0x00F0) /*!< EXTI 9 configuration */
+#define SYSCFG_EXTICR3_EXTI10 ((uint16_t)0x0F00) /*!< EXTI 10 configuration */
+#define SYSCFG_EXTICR3_EXTI11 ((uint16_t)0xF000) /*!< EXTI 11 configuration */
+
+/**
+ * @brief EXTI8 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI8_PA ((uint16_t)0x0000) /*!< PA[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PB ((uint16_t)0x0001) /*!< PB[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PC ((uint16_t)0x0002) /*!< PC[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PD ((uint16_t)0x0003) /*!< PD[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PF ((uint16_t)0x0005) /*!< PF[8] pin */
+
+/**
+ * @brief EXTI9 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI9_PA ((uint16_t)0x0000) /*!< PA[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PB ((uint16_t)0x0010) /*!< PB[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PC ((uint16_t)0x0020) /*!< PC[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PD ((uint16_t)0x0030) /*!< PD[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PF ((uint16_t)0x0050) /*!< PF[9] pin */
+
+/**
+ * @brief EXTI10 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI10_PA ((uint16_t)0x0000) /*!< PA[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PB ((uint16_t)0x0100) /*!< PB[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PC ((uint16_t)0x0200) /*!< PC[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PD ((uint16_t)0x0300) /*!< PD[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PF ((uint16_t)0x0500) /*!< PF[10] pin */
+
+/**
+ * @brief EXTI11 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI11_PA ((uint16_t)0x0000) /*!< PA[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PB ((uint16_t)0x1000) /*!< PB[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PC ((uint16_t)0x2000) /*!< PC[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PD ((uint16_t)0x3000) /*!< PD[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PF ((uint16_t)0x5000) /*!< PF[11] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR4 register **************/
+#define SYSCFG_EXTICR4_EXTI12 ((uint16_t)0x000F) /*!< EXTI 12 configuration */
+#define SYSCFG_EXTICR4_EXTI13 ((uint16_t)0x00F0) /*!< EXTI 13 configuration */
+#define SYSCFG_EXTICR4_EXTI14 ((uint16_t)0x0F00) /*!< EXTI 14 configuration */
+#define SYSCFG_EXTICR4_EXTI15 ((uint16_t)0xF000) /*!< EXTI 15 configuration */
+
+/**
+ * @brief EXTI12 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI12_PA ((uint16_t)0x0000) /*!< PA[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PB ((uint16_t)0x0001) /*!< PB[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PC ((uint16_t)0x0002) /*!< PC[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PD ((uint16_t)0x0003) /*!< PD[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PF ((uint16_t)0x0005) /*!< PF[12] pin */
+
+/**
+ * @brief EXTI13 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI13_PA ((uint16_t)0x0000) /*!< PA[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PB ((uint16_t)0x0010) /*!< PB[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PC ((uint16_t)0x0020) /*!< PC[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PD ((uint16_t)0x0030) /*!< PD[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PF ((uint16_t)0x0050) /*!< PF[13] pin */
+
+/**
+ * @brief EXTI14 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI14_PA ((uint16_t)0x0000) /*!< PA[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PB ((uint16_t)0x0100) /*!< PB[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PC ((uint16_t)0x0200) /*!< PC[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PD ((uint16_t)0x0300) /*!< PD[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PF ((uint16_t)0x0500) /*!< PF[14] pin */
+
+/**
+ * @brief EXTI15 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI15_PA ((uint16_t)0x0000) /*!< PA[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PB ((uint16_t)0x1000) /*!< PB[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PC ((uint16_t)0x2000) /*!< PC[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PD ((uint16_t)0x3000) /*!< PD[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PF ((uint16_t)0x5000) /*!< PF[15] pin */
+
+/***************** Bit definition for SYSCFG_CFGR2 register ****************/
+#define SYSCFG_CFGR2_LOCKUP_LOCK ((uint32_t)0x00000001) /*!< Enables and locks the LOCKUP (Hardfault) output of CortexM0 with Break Input of TIMER1 */
+#define SYSCFG_CFGR2_SRAM_PARITY_LOCK ((uint32_t)0x00000002) /*!< Enables and locks the SRAM_PARITY error signal with Break Input of TIMER1 */
+#define SYSCFG_CFGR2_SRAM_PEF ((uint32_t)0x00000100) /*!< SRAM Parity error flag */
+#define SYSCFG_CFGR2_SRAM_PE SYSCFG_CFGR2_SRAM_PEF /*!< SRAM Parity error flag (define maintained for legacy purpose) */
+
+/*****************************************************************************/
+/* */
+/* Timers (TIM) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for TIM_CR1 register *******************/
+#define TIM_CR1_CEN ((uint32_t)0x00000001) /*!<Counter enable */
+#define TIM_CR1_UDIS ((uint32_t)0x00000002) /*!<Update disable */
+#define TIM_CR1_URS ((uint32_t)0x00000004) /*!<Update request source */
+#define TIM_CR1_OPM ((uint32_t)0x00000008) /*!<One pulse mode */
+#define TIM_CR1_DIR ((uint32_t)0x00000010) /*!<Direction */
+
+#define TIM_CR1_CMS ((uint32_t)0x00000060) /*!<CMS[1:0] bits (Center-aligned mode selection) */
+#define TIM_CR1_CMS_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define TIM_CR1_CMS_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+
+#define TIM_CR1_ARPE ((uint32_t)0x00000080) /*!<Auto-reload preload enable */
+
+#define TIM_CR1_CKD ((uint32_t)0x00000300) /*!<CKD[1:0] bits (clock division) */
+#define TIM_CR1_CKD_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CR1_CKD_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+/******************* Bit definition for TIM_CR2 register *******************/
+#define TIM_CR2_CCPC ((uint32_t)0x00000001) /*!<Capture/Compare Preloaded Control */
+#define TIM_CR2_CCUS ((uint32_t)0x00000004) /*!<Capture/Compare Control Update Selection */
+#define TIM_CR2_CCDS ((uint32_t)0x00000008) /*!<Capture/Compare DMA Selection */
+
+#define TIM_CR2_MMS ((uint32_t)0x00000070) /*!<MMS[2:0] bits (Master Mode Selection) */
+#define TIM_CR2_MMS_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CR2_MMS_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CR2_MMS_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CR2_TI1S ((uint32_t)0x00000080) /*!<TI1 Selection */
+#define TIM_CR2_OIS1 ((uint32_t)0x00000100) /*!<Output Idle state 1 (OC1 output) */
+#define TIM_CR2_OIS1N ((uint32_t)0x00000200) /*!<Output Idle state 1 (OC1N output) */
+#define TIM_CR2_OIS2 ((uint32_t)0x00000400) /*!<Output Idle state 2 (OC2 output) */
+#define TIM_CR2_OIS2N ((uint32_t)0x00000800) /*!<Output Idle state 2 (OC2N output) */
+#define TIM_CR2_OIS3 ((uint32_t)0x00001000) /*!<Output Idle state 3 (OC3 output) */
+#define TIM_CR2_OIS3N ((uint32_t)0x00002000) /*!<Output Idle state 3 (OC3N output) */
+#define TIM_CR2_OIS4 ((uint32_t)0x00004000) /*!<Output Idle state 4 (OC4 output) */
+
+/******************* Bit definition for TIM_SMCR register ******************/
+#define TIM_SMCR_SMS ((uint32_t)0x00000007) /*!<SMS[2:0] bits (Slave mode selection) */
+#define TIM_SMCR_SMS_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_SMCR_SMS_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_SMCR_SMS_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+
+#define TIM_SMCR_OCCS ((uint32_t)0x00000008) /*!< OCREF clear selection */
+
+#define TIM_SMCR_TS ((uint32_t)0x00000070) /*!<TS[2:0] bits (Trigger selection) */
+#define TIM_SMCR_TS_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_SMCR_TS_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_SMCR_TS_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_SMCR_MSM ((uint32_t)0x00000080) /*!<Master/slave mode */
+
+#define TIM_SMCR_ETF ((uint32_t)0x00000F00) /*!<ETF[3:0] bits (External trigger filter) */
+#define TIM_SMCR_ETF_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_SMCR_ETF_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define TIM_SMCR_ETF_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define TIM_SMCR_ETF_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+
+#define TIM_SMCR_ETPS ((uint32_t)0x00003000) /*!<ETPS[1:0] bits (External trigger prescaler) */
+#define TIM_SMCR_ETPS_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_SMCR_ETPS_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+
+#define TIM_SMCR_ECE ((uint32_t)0x00004000) /*!<External clock enable */
+#define TIM_SMCR_ETP ((uint32_t)0x00008000) /*!<External trigger polarity */
+
+/******************* Bit definition for TIM_DIER register ******************/
+#define TIM_DIER_UIE ((uint32_t)0x00000001) /*!<Update interrupt enable */
+#define TIM_DIER_CC1IE ((uint32_t)0x00000002) /*!<Capture/Compare 1 interrupt enable */
+#define TIM_DIER_CC2IE ((uint32_t)0x00000004) /*!<Capture/Compare 2 interrupt enable */
+#define TIM_DIER_CC3IE ((uint32_t)0x00000008) /*!<Capture/Compare 3 interrupt enable */
+#define TIM_DIER_CC4IE ((uint32_t)0x00000010) /*!<Capture/Compare 4 interrupt enable */
+#define TIM_DIER_COMIE ((uint32_t)0x00000020) /*!<COM interrupt enable */
+#define TIM_DIER_TIE ((uint32_t)0x00000040) /*!<Trigger interrupt enable */
+#define TIM_DIER_BIE ((uint32_t)0x00000080) /*!<Break interrupt enable */
+#define TIM_DIER_UDE ((uint32_t)0x00000100) /*!<Update DMA request enable */
+#define TIM_DIER_CC1DE ((uint32_t)0x00000200) /*!<Capture/Compare 1 DMA request enable */
+#define TIM_DIER_CC2DE ((uint32_t)0x00000400) /*!<Capture/Compare 2 DMA request enable */
+#define TIM_DIER_CC3DE ((uint32_t)0x00000800) /*!<Capture/Compare 3 DMA request enable */
+#define TIM_DIER_CC4DE ((uint32_t)0x00001000) /*!<Capture/Compare 4 DMA request enable */
+#define TIM_DIER_COMDE ((uint32_t)0x00002000) /*!<COM DMA request enable */
+#define TIM_DIER_TDE ((uint32_t)0x00004000) /*!<Trigger DMA request enable */
+
+/******************** Bit definition for TIM_SR register *******************/
+#define TIM_SR_UIF ((uint32_t)0x00000001) /*!<Update interrupt Flag */
+#define TIM_SR_CC1IF ((uint32_t)0x00000002) /*!<Capture/Compare 1 interrupt Flag */
+#define TIM_SR_CC2IF ((uint32_t)0x00000004) /*!<Capture/Compare 2 interrupt Flag */
+#define TIM_SR_CC3IF ((uint32_t)0x00000008) /*!<Capture/Compare 3 interrupt Flag */
+#define TIM_SR_CC4IF ((uint32_t)0x00000010) /*!<Capture/Compare 4 interrupt Flag */
+#define TIM_SR_COMIF ((uint32_t)0x00000020) /*!<COM interrupt Flag */
+#define TIM_SR_TIF ((uint32_t)0x00000040) /*!<Trigger interrupt Flag */
+#define TIM_SR_BIF ((uint32_t)0x00000080) /*!<Break interrupt Flag */
+#define TIM_SR_CC1OF ((uint32_t)0x00000200) /*!<Capture/Compare 1 Overcapture Flag */
+#define TIM_SR_CC2OF ((uint32_t)0x00000400) /*!<Capture/Compare 2 Overcapture Flag */
+#define TIM_SR_CC3OF ((uint32_t)0x00000800) /*!<Capture/Compare 3 Overcapture Flag */
+#define TIM_SR_CC4OF ((uint32_t)0x00001000) /*!<Capture/Compare 4 Overcapture Flag */
+
+/******************* Bit definition for TIM_EGR register *******************/
+#define TIM_EGR_UG ((uint32_t)0x00000001) /*!<Update Generation */
+#define TIM_EGR_CC1G ((uint32_t)0x00000002) /*!<Capture/Compare 1 Generation */
+#define TIM_EGR_CC2G ((uint32_t)0x00000004) /*!<Capture/Compare 2 Generation */
+#define TIM_EGR_CC3G ((uint32_t)0x00000008) /*!<Capture/Compare 3 Generation */
+#define TIM_EGR_CC4G ((uint32_t)0x00000010) /*!<Capture/Compare 4 Generation */
+#define TIM_EGR_COMG ((uint32_t)0x00000020) /*!<Capture/Compare Control Update Generation */
+#define TIM_EGR_TG ((uint32_t)0x00000040) /*!<Trigger Generation */
+#define TIM_EGR_BG ((uint32_t)0x00000080) /*!<Break Generation */
+
+/****************** Bit definition for TIM_CCMR1 register ******************/
+#define TIM_CCMR1_CC1S ((uint32_t)0x00000003) /*!<CC1S[1:0] bits (Capture/Compare 1 Selection) */
+#define TIM_CCMR1_CC1S_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_CCMR1_CC1S_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC1FE ((uint32_t)0x00000004) /*!<Output Compare 1 Fast enable */
+#define TIM_CCMR1_OC1PE ((uint32_t)0x00000008) /*!<Output Compare 1 Preload enable */
+
+#define TIM_CCMR1_OC1M ((uint32_t)0x00000070) /*!<OC1M[2:0] bits (Output Compare 1 Mode) */
+#define TIM_CCMR1_OC1M_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR1_OC1M_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR1_OC1M_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CCMR1_OC1CE ((uint32_t)0x00000080) /*!<Output Compare 1Clear Enable */
+
+#define TIM_CCMR1_CC2S ((uint32_t)0x00000300) /*!<CC2S[1:0] bits (Capture/Compare 2 Selection) */
+#define TIM_CCMR1_CC2S_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CCMR1_CC2S_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC2FE ((uint32_t)0x00000400) /*!<Output Compare 2 Fast enable */
+#define TIM_CCMR1_OC2PE ((uint32_t)0x00000800) /*!<Output Compare 2 Preload enable */
+
+#define TIM_CCMR1_OC2M ((uint32_t)0x00007000) /*!<OC2M[2:0] bits (Output Compare 2 Mode) */
+#define TIM_CCMR1_OC2M_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR1_OC2M_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR1_OC2M_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+
+#define TIM_CCMR1_OC2CE ((uint32_t)0x00008000) /*!<Output Compare 2 Clear Enable */
+
+/*---------------------------------------------------------------------------*/
+
+#define TIM_CCMR1_IC1PSC ((uint32_t)0x0000000C) /*!<IC1PSC[1:0] bits (Input Capture 1 Prescaler) */
+#define TIM_CCMR1_IC1PSC_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define TIM_CCMR1_IC1PSC_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC1F ((uint32_t)0x000000F0) /*!<IC1F[3:0] bits (Input Capture 1 Filter) */
+#define TIM_CCMR1_IC1F_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR1_IC1F_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR1_IC1F_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define TIM_CCMR1_IC1F_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define TIM_CCMR1_IC2PSC ((uint32_t)0x00000C00) /*!<IC2PSC[1:0] bits (Input Capture 2 Prescaler) */
+#define TIM_CCMR1_IC2PSC_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define TIM_CCMR1_IC2PSC_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC2F ((uint32_t)0x0000F000) /*!<IC2F[3:0] bits (Input Capture 2 Filter) */
+#define TIM_CCMR1_IC2F_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR1_IC2F_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR1_IC2F_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define TIM_CCMR1_IC2F_3 ((uint32_t)0x00008000) /*!<Bit 3 */
+
+/****************** Bit definition for TIM_CCMR2 register ******************/
+#define TIM_CCMR2_CC3S ((uint32_t)0x00000003) /*!<CC3S[1:0] bits (Capture/Compare 3 Selection) */
+#define TIM_CCMR2_CC3S_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_CCMR2_CC3S_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC3FE ((uint32_t)0x00000004) /*!<Output Compare 3 Fast enable */
+#define TIM_CCMR2_OC3PE ((uint32_t)0x00000008) /*!<Output Compare 3 Preload enable */
+
+#define TIM_CCMR2_OC3M ((uint32_t)0x00000070) /*!<OC3M[2:0] bits (Output Compare 3 Mode) */
+#define TIM_CCMR2_OC3M_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR2_OC3M_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR2_OC3M_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CCMR2_OC3CE ((uint32_t)0x00000080) /*!<Output Compare 3 Clear Enable */
+
+#define TIM_CCMR2_CC4S ((uint32_t)0x00000300) /*!<CC4S[1:0] bits (Capture/Compare 4 Selection) */
+#define TIM_CCMR2_CC4S_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CCMR2_CC4S_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC4FE ((uint32_t)0x00000400) /*!<Output Compare 4 Fast enable */
+#define TIM_CCMR2_OC4PE ((uint32_t)0x00000800) /*!<Output Compare 4 Preload enable */
+
+#define TIM_CCMR2_OC4M ((uint32_t)0x00007000) /*!<OC4M[2:0] bits (Output Compare 4 Mode) */
+#define TIM_CCMR2_OC4M_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR2_OC4M_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR2_OC4M_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+
+#define TIM_CCMR2_OC4CE ((uint32_t)0x00008000) /*!<Output Compare 4 Clear Enable */
+
+/*---------------------------------------------------------------------------*/
+
+#define TIM_CCMR2_IC3PSC ((uint32_t)0x0000000C) /*!<IC3PSC[1:0] bits (Input Capture 3 Prescaler) */
+#define TIM_CCMR2_IC3PSC_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define TIM_CCMR2_IC3PSC_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC3F ((uint32_t)0x000000F0) /*!<IC3F[3:0] bits (Input Capture 3 Filter) */
+#define TIM_CCMR2_IC3F_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR2_IC3F_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR2_IC3F_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define TIM_CCMR2_IC3F_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define TIM_CCMR2_IC4PSC ((uint32_t)0x00000C00) /*!<IC4PSC[1:0] bits (Input Capture 4 Prescaler) */
+#define TIM_CCMR2_IC4PSC_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define TIM_CCMR2_IC4PSC_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC4F ((uint32_t)0x0000F000) /*!<IC4F[3:0] bits (Input Capture 4 Filter) */
+#define TIM_CCMR2_IC4F_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR2_IC4F_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR2_IC4F_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define TIM_CCMR2_IC4F_3 ((uint32_t)0x00008000) /*!<Bit 3 */
+
+/******************* Bit definition for TIM_CCER register ******************/
+#define TIM_CCER_CC1E ((uint32_t)0x00000001) /*!<Capture/Compare 1 output enable */
+#define TIM_CCER_CC1P ((uint32_t)0x00000002) /*!<Capture/Compare 1 output Polarity */
+#define TIM_CCER_CC1NE ((uint32_t)0x00000004) /*!<Capture/Compare 1 Complementary output enable */
+#define TIM_CCER_CC1NP ((uint32_t)0x00000008) /*!<Capture/Compare 1 Complementary output Polarity */
+#define TIM_CCER_CC2E ((uint32_t)0x00000010) /*!<Capture/Compare 2 output enable */
+#define TIM_CCER_CC2P ((uint32_t)0x00000020) /*!<Capture/Compare 2 output Polarity */
+#define TIM_CCER_CC2NE ((uint32_t)0x00000040) /*!<Capture/Compare 2 Complementary output enable */
+#define TIM_CCER_CC2NP ((uint32_t)0x00000080) /*!<Capture/Compare 2 Complementary output Polarity */
+#define TIM_CCER_CC3E ((uint32_t)0x00000100) /*!<Capture/Compare 3 output enable */
+#define TIM_CCER_CC3P ((uint32_t)0x00000200) /*!<Capture/Compare 3 output Polarity */
+#define TIM_CCER_CC3NE ((uint32_t)0x00000400) /*!<Capture/Compare 3 Complementary output enable */
+#define TIM_CCER_CC3NP ((uint32_t)0x00000800) /*!<Capture/Compare 3 Complementary output Polarity */
+#define TIM_CCER_CC4E ((uint32_t)0x00001000) /*!<Capture/Compare 4 output enable */
+#define TIM_CCER_CC4P ((uint32_t)0x00002000) /*!<Capture/Compare 4 output Polarity */
+#define TIM_CCER_CC4NP ((uint32_t)0x00008000) /*!<Capture/Compare 4 Complementary output Polarity */
+
+/******************* Bit definition for TIM_CNT register *******************/
+#define TIM_CNT_CNT ((uint32_t)0xFFFFFFFF) /*!<Counter Value */
+
+/******************* Bit definition for TIM_PSC register *******************/
+#define TIM_PSC_PSC ((uint32_t)0x0000FFFF) /*!<Prescaler Value */
+
+/******************* Bit definition for TIM_ARR register *******************/
+#define TIM_ARR_ARR ((uint32_t)0xFFFFFFFF) /*!<actual auto-reload Value */
+
+/******************* Bit definition for TIM_RCR register *******************/
+#define TIM_RCR_REP ((uint32_t)0x000000FF) /*!<Repetition Counter Value */
+
+/******************* Bit definition for TIM_CCR1 register ******************/
+#define TIM_CCR1_CCR1 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 1 Value */
+
+/******************* Bit definition for TIM_CCR2 register ******************/
+#define TIM_CCR2_CCR2 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 2 Value */
+
+/******************* Bit definition for TIM_CCR3 register ******************/
+#define TIM_CCR3_CCR3 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 3 Value */
+
+/******************* Bit definition for TIM_CCR4 register ******************/
+#define TIM_CCR4_CCR4 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 4 Value */
+
+/******************* Bit definition for TIM_BDTR register ******************/
+#define TIM_BDTR_DTG ((uint32_t)0x000000FF) /*!<DTG[0:7] bits (Dead-Time Generator set-up) */
+#define TIM_BDTR_DTG_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_BDTR_DTG_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_BDTR_DTG_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define TIM_BDTR_DTG_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define TIM_BDTR_DTG_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define TIM_BDTR_DTG_5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define TIM_BDTR_DTG_6 ((uint32_t)0x00000040) /*!<Bit 6 */
+#define TIM_BDTR_DTG_7 ((uint32_t)0x00000080) /*!<Bit 7 */
+
+#define TIM_BDTR_LOCK ((uint32_t)0x00000300) /*!<LOCK[1:0] bits (Lock Configuration) */
+#define TIM_BDTR_LOCK_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_BDTR_LOCK_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_BDTR_OSSI ((uint32_t)0x00000400) /*!<Off-State Selection for Idle mode */
+#define TIM_BDTR_OSSR ((uint32_t)0x00000800) /*!<Off-State Selection for Run mode */
+#define TIM_BDTR_BKE ((uint32_t)0x00001000) /*!<Break enable */
+#define TIM_BDTR_BKP ((uint32_t)0x00002000) /*!<Break Polarity */
+#define TIM_BDTR_AOE ((uint32_t)0x00004000) /*!<Automatic Output enable */
+#define TIM_BDTR_MOE ((uint32_t)0x00008000) /*!<Main Output enable */
+
+/******************* Bit definition for TIM_DCR register *******************/
+#define TIM_DCR_DBA ((uint32_t)0x0000001F) /*!<DBA[4:0] bits (DMA Base Address) */
+#define TIM_DCR_DBA_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_DCR_DBA_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_DCR_DBA_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define TIM_DCR_DBA_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define TIM_DCR_DBA_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+
+#define TIM_DCR_DBL ((uint32_t)0x00001F00) /*!<DBL[4:0] bits (DMA Burst Length) */
+#define TIM_DCR_DBL_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_DCR_DBL_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define TIM_DCR_DBL_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define TIM_DCR_DBL_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define TIM_DCR_DBL_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+
+/******************* Bit definition for TIM_DMAR register ******************/
+#define TIM_DMAR_DMAB ((uint32_t)0x0000FFFF) /*!<DMA register for burst accesses */
+
+/******************* Bit definition for TIM14_OR register ********************/
+#define TIM14_OR_TI1_RMP ((uint32_t)0x00000003) /*!<TI1_RMP[1:0] bits (TIM14 Input 4 remap) */
+#define TIM14_OR_TI1_RMP_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM14_OR_TI1_RMP_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+
+/******************************************************************************/
+/* */
+/* Universal Synchronous Asynchronous Receiver Transmitter (USART) */
+/* */
+/******************************************************************************/
+/****************** Bit definition for USART_CR1 register *******************/
+#define USART_CR1_UE ((uint32_t)0x00000001) /*!< USART Enable */
+#define USART_CR1_UESM ((uint32_t)0x00000002) /*!< USART Enable in STOP Mode */
+#define USART_CR1_RE ((uint32_t)0x00000004) /*!< Receiver Enable */
+#define USART_CR1_TE ((uint32_t)0x00000008) /*!< Transmitter Enable */
+#define USART_CR1_IDLEIE ((uint32_t)0x00000010) /*!< IDLE Interrupt Enable */
+#define USART_CR1_RXNEIE ((uint32_t)0x00000020) /*!< RXNE Interrupt Enable */
+#define USART_CR1_TCIE ((uint32_t)0x00000040) /*!< Transmission Complete Interrupt Enable */
+#define USART_CR1_TXEIE ((uint32_t)0x00000080) /*!< TXE Interrupt Enable */
+#define USART_CR1_PEIE ((uint32_t)0x00000100) /*!< PE Interrupt Enable */
+#define USART_CR1_PS ((uint32_t)0x00000200) /*!< Parity Selection */
+#define USART_CR1_PCE ((uint32_t)0x00000400) /*!< Parity Control Enable */
+#define USART_CR1_WAKE ((uint32_t)0x00000800) /*!< Receiver Wakeup method */
+#define USART_CR1_M0 ((uint32_t)0x00001000) /*!< Word length bit 0 */
+#define USART_CR1_M ((uint32_t)0x00001000) /*!< SmartCard Length */
+#define USART_CR1_MME ((uint32_t)0x00002000) /*!< Mute Mode Enable */
+#define USART_CR1_CMIE ((uint32_t)0x00004000) /*!< Character match interrupt enable */
+#define USART_CR1_OVER8 ((uint32_t)0x00008000) /*!< Oversampling by 8-bit or 16-bit mode */
+#define USART_CR1_DEDT ((uint32_t)0x001F0000) /*!< DEDT[4:0] bits (Driver Enable Deassertion Time) */
+#define USART_CR1_DEDT_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define USART_CR1_DEDT_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define USART_CR1_DEDT_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define USART_CR1_DEDT_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+#define USART_CR1_DEDT_4 ((uint32_t)0x00100000) /*!< Bit 4 */
+#define USART_CR1_DEAT ((uint32_t)0x03E00000) /*!< DEAT[4:0] bits (Driver Enable Assertion Time) */
+#define USART_CR1_DEAT_0 ((uint32_t)0x00200000) /*!< Bit 0 */
+#define USART_CR1_DEAT_1 ((uint32_t)0x00400000) /*!< Bit 1 */
+#define USART_CR1_DEAT_2 ((uint32_t)0x00800000) /*!< Bit 2 */
+#define USART_CR1_DEAT_3 ((uint32_t)0x01000000) /*!< Bit 3 */
+#define USART_CR1_DEAT_4 ((uint32_t)0x02000000) /*!< Bit 4 */
+#define USART_CR1_RTOIE ((uint32_t)0x04000000) /*!< Receive Time Out interrupt enable */
+#define USART_CR1_EOBIE ((uint32_t)0x08000000) /*!< End of Block interrupt enable */
+
+/****************** Bit definition for USART_CR2 register *******************/
+#define USART_CR2_ADDM7 ((uint32_t)0x00000010) /*!< 7-bit or 4-bit Address Detection */
+#define USART_CR2_LBDL ((uint32_t)0x00000020) /*!< LIN Break Detection Length */
+#define USART_CR2_LBDIE ((uint32_t)0x00000040) /*!< LIN Break Detection Interrupt Enable */
+#define USART_CR2_LBCL ((uint32_t)0x00000100) /*!< Last Bit Clock pulse */
+#define USART_CR2_CPHA ((uint32_t)0x00000200) /*!< Clock Phase */
+#define USART_CR2_CPOL ((uint32_t)0x00000400) /*!< Clock Polarity */
+#define USART_CR2_CLKEN ((uint32_t)0x00000800) /*!< Clock Enable */
+#define USART_CR2_STOP ((uint32_t)0x00003000) /*!< STOP[1:0] bits (STOP bits) */
+#define USART_CR2_STOP_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define USART_CR2_STOP_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+#define USART_CR2_LINEN ((uint32_t)0x00004000) /*!< LIN mode enable */
+#define USART_CR2_SWAP ((uint32_t)0x00008000) /*!< SWAP TX/RX pins */
+#define USART_CR2_RXINV ((uint32_t)0x00010000) /*!< RX pin active level inversion */
+#define USART_CR2_TXINV ((uint32_t)0x00020000) /*!< TX pin active level inversion */
+#define USART_CR2_DATAINV ((uint32_t)0x00040000) /*!< Binary data inversion */
+#define USART_CR2_MSBFIRST ((uint32_t)0x00080000) /*!< Most Significant Bit First */
+#define USART_CR2_ABREN ((uint32_t)0x00100000) /*!< Auto Baud-Rate Enable*/
+#define USART_CR2_ABRMODE ((uint32_t)0x00600000) /*!< ABRMOD[1:0] bits (Auto Baud-Rate Mode) */
+#define USART_CR2_ABRMODE_0 ((uint32_t)0x00200000) /*!< Bit 0 */
+#define USART_CR2_ABRMODE_1 ((uint32_t)0x00400000) /*!< Bit 1 */
+#define USART_CR2_RTOEN ((uint32_t)0x00800000) /*!< Receiver Time-Out enable */
+#define USART_CR2_ADD ((uint32_t)0xFF000000) /*!< Address of the USART node */
+
+/****************** Bit definition for USART_CR3 register *******************/
+#define USART_CR3_EIE ((uint32_t)0x00000001) /*!< Error Interrupt Enable */
+#define USART_CR3_IREN ((uint32_t)0x00000002) /*!< IrDA mode Enable */
+#define USART_CR3_IRLP ((uint32_t)0x00000004) /*!< IrDA Low-Power */
+#define USART_CR3_HDSEL ((uint32_t)0x00000008) /*!< Half-Duplex Selection */
+#define USART_CR3_NACK ((uint32_t)0x00000010) /*!< SmartCard NACK enable */
+#define USART_CR3_SCEN ((uint32_t)0x00000020) /*!< SmartCard mode enable */
+#define USART_CR3_DMAR ((uint32_t)0x00000040) /*!< DMA Enable Receiver */
+#define USART_CR3_DMAT ((uint32_t)0x00000080) /*!< DMA Enable Transmitter */
+#define USART_CR3_RTSE ((uint32_t)0x00000100) /*!< RTS Enable */
+#define USART_CR3_CTSE ((uint32_t)0x00000200) /*!< CTS Enable */
+#define USART_CR3_CTSIE ((uint32_t)0x00000400) /*!< CTS Interrupt Enable */
+#define USART_CR3_ONEBIT ((uint32_t)0x00000800) /*!< One sample bit method enable */
+#define USART_CR3_OVRDIS ((uint32_t)0x00001000) /*!< Overrun Disable */
+#define USART_CR3_DDRE ((uint32_t)0x00002000) /*!< DMA Disable on Reception Error */
+#define USART_CR3_DEM ((uint32_t)0x00004000) /*!< Driver Enable Mode */
+#define USART_CR3_DEP ((uint32_t)0x00008000) /*!< Driver Enable Polarity Selection */
+#define USART_CR3_SCARCNT ((uint32_t)0x000E0000) /*!< SCARCNT[2:0] bits (SmartCard Auto-Retry Count) */
+#define USART_CR3_SCARCNT_0 ((uint32_t)0x00020000) /*!< Bit 0 */
+#define USART_CR3_SCARCNT_1 ((uint32_t)0x00040000) /*!< Bit 1 */
+#define USART_CR3_SCARCNT_2 ((uint32_t)0x00080000) /*!< Bit 2 */
+#define USART_CR3_WUS ((uint32_t)0x00300000) /*!< WUS[1:0] bits (Wake UP Interrupt Flag Selection) */
+#define USART_CR3_WUS_0 ((uint32_t)0x00100000) /*!< Bit 0 */
+#define USART_CR3_WUS_1 ((uint32_t)0x00200000) /*!< Bit 1 */
+#define USART_CR3_WUFIE ((uint32_t)0x00400000) /*!< Wake Up Interrupt Enable */
+
+/****************** Bit definition for USART_BRR register *******************/
+#define USART_BRR_DIV_FRACTION ((uint32_t)0x0000000F) /*!< Fraction of USARTDIV */
+#define USART_BRR_DIV_MANTISSA ((uint32_t)0x0000FFF0) /*!< Mantissa of USARTDIV */
+
+/****************** Bit definition for USART_GTPR register ******************/
+#define USART_GTPR_PSC ((uint32_t)0x000000FF) /*!< PSC[7:0] bits (Prescaler value) */
+#define USART_GTPR_GT ((uint32_t)0x0000FF00) /*!< GT[7:0] bits (Guard time value) */
+
+
+/******************* Bit definition for USART_RTOR register *****************/
+#define USART_RTOR_RTO ((uint32_t)0x00FFFFFF) /*!< Receiver Time Out Value */
+#define USART_RTOR_BLEN ((uint32_t)0xFF000000) /*!< Block Length */
+
+/******************* Bit definition for USART_RQR register ******************/
+#define USART_RQR_ABRRQ ((uint32_t)0x00000001) /*!< Auto-Baud Rate Request */
+#define USART_RQR_SBKRQ ((uint32_t)0x00000002) /*!< Send Break Request */
+#define USART_RQR_MMRQ ((uint32_t)0x00000004) /*!< Mute Mode Request */
+#define USART_RQR_RXFRQ ((uint32_t)0x00000008) /*!< Receive Data flush Request */
+#define USART_RQR_TXFRQ ((uint32_t)0x00000010) /*!< Transmit data flush Request */
+
+/******************* Bit definition for USART_ISR register ******************/
+#define USART_ISR_PE ((uint32_t)0x00000001) /*!< Parity Error */
+#define USART_ISR_FE ((uint32_t)0x00000002) /*!< Framing Error */
+#define USART_ISR_NE ((uint32_t)0x00000004) /*!< Noise detected Flag */
+#define USART_ISR_ORE ((uint32_t)0x00000008) /*!< OverRun Error */
+#define USART_ISR_IDLE ((uint32_t)0x00000010) /*!< IDLE line detected */
+#define USART_ISR_RXNE ((uint32_t)0x00000020) /*!< Read Data Register Not Empty */
+#define USART_ISR_TC ((uint32_t)0x00000040) /*!< Transmission Complete */
+#define USART_ISR_TXE ((uint32_t)0x00000080) /*!< Transmit Data Register Empty */
+#define USART_ISR_LBDF ((uint32_t)0x00000100) /*!< LIN Break Detection Flag */
+#define USART_ISR_CTSIF ((uint32_t)0x00000200) /*!< CTS interrupt flag */
+#define USART_ISR_CTS ((uint32_t)0x00000400) /*!< CTS flag */
+#define USART_ISR_RTOF ((uint32_t)0x00000800) /*!< Receiver Time Out */
+#define USART_ISR_EOBF ((uint32_t)0x00001000) /*!< End Of Block Flag */
+#define USART_ISR_ABRE ((uint32_t)0x00004000) /*!< Auto-Baud Rate Error */
+#define USART_ISR_ABRF ((uint32_t)0x00008000) /*!< Auto-Baud Rate Flag */
+#define USART_ISR_BUSY ((uint32_t)0x00010000) /*!< Busy Flag */
+#define USART_ISR_CMF ((uint32_t)0x00020000) /*!< Character Match Flag */
+#define USART_ISR_SBKF ((uint32_t)0x00040000) /*!< Send Break Flag */
+#define USART_ISR_RWU ((uint32_t)0x00080000) /*!< Receive Wake Up from mute mode Flag */
+#define USART_ISR_WUF ((uint32_t)0x00100000) /*!< Wake Up from stop mode Flag */
+#define USART_ISR_TEACK ((uint32_t)0x00200000) /*!< Transmit Enable Acknowledge Flag */
+#define USART_ISR_REACK ((uint32_t)0x00400000) /*!< Receive Enable Acknowledge Flag */
+
+/******************* Bit definition for USART_ICR register ******************/
+#define USART_ICR_PECF ((uint32_t)0x00000001) /*!< Parity Error Clear Flag */
+#define USART_ICR_FECF ((uint32_t)0x00000002) /*!< Framing Error Clear Flag */
+#define USART_ICR_NCF ((uint32_t)0x00000004) /*!< Noise detected Clear Flag */
+#define USART_ICR_ORECF ((uint32_t)0x00000008) /*!< OverRun Error Clear Flag */
+#define USART_ICR_IDLECF ((uint32_t)0x00000010) /*!< IDLE line detected Clear Flag */
+#define USART_ICR_TCCF ((uint32_t)0x00000040) /*!< Transmission Complete Clear Flag */
+#define USART_ICR_LBDCF ((uint32_t)0x00000100) /*!< LIN Break Detection Clear Flag */
+#define USART_ICR_CTSCF ((uint32_t)0x00000200) /*!< CTS Interrupt Clear Flag */
+#define USART_ICR_RTOCF ((uint32_t)0x00000800) /*!< Receiver Time Out Clear Flag */
+#define USART_ICR_EOBCF ((uint32_t)0x00001000) /*!< End Of Block Clear Flag */
+#define USART_ICR_CMCF ((uint32_t)0x00020000) /*!< Character Match Clear Flag */
+#define USART_ICR_WUCF ((uint32_t)0x00100000) /*!< Wake Up from stop mode Clear Flag */
+
+/******************* Bit definition for USART_RDR register ******************/
+#define USART_RDR_RDR ((uint16_t)0x01FF) /*!< RDR[8:0] bits (Receive Data value) */
+
+/******************* Bit definition for USART_TDR register ******************/
+#define USART_TDR_TDR ((uint16_t)0x01FF) /*!< TDR[8:0] bits (Transmit Data value) */
+
+/******************************************************************************/
+/* */
+/* Window WATCHDOG (WWDG) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for WWDG_CR register ********************/
+#define WWDG_CR_T ((uint32_t)0x7F) /*!<T[6:0] bits (7-Bit counter (MSB to LSB)) */
+#define WWDG_CR_T0 ((uint32_t)0x01) /*!<Bit 0 */
+#define WWDG_CR_T1 ((uint32_t)0x02) /*!<Bit 1 */
+#define WWDG_CR_T2 ((uint32_t)0x04) /*!<Bit 2 */
+#define WWDG_CR_T3 ((uint32_t)0x08) /*!<Bit 3 */
+#define WWDG_CR_T4 ((uint32_t)0x10) /*!<Bit 4 */
+#define WWDG_CR_T5 ((uint32_t)0x20) /*!<Bit 5 */
+#define WWDG_CR_T6 ((uint32_t)0x40) /*!<Bit 6 */
+
+#define WWDG_CR_WDGA ((uint32_t)0x80) /*!<Activation bit */
+
+/******************* Bit definition for WWDG_CFR register *******************/
+#define WWDG_CFR_W ((uint32_t)0x007F) /*!<W[6:0] bits (7-bit window value) */
+#define WWDG_CFR_W0 ((uint32_t)0x0001) /*!<Bit 0 */
+#define WWDG_CFR_W1 ((uint32_t)0x0002) /*!<Bit 1 */
+#define WWDG_CFR_W2 ((uint32_t)0x0004) /*!<Bit 2 */
+#define WWDG_CFR_W3 ((uint32_t)0x0008) /*!<Bit 3 */
+#define WWDG_CFR_W4 ((uint32_t)0x0010) /*!<Bit 4 */
+#define WWDG_CFR_W5 ((uint32_t)0x0020) /*!<Bit 5 */
+#define WWDG_CFR_W6 ((uint32_t)0x0040) /*!<Bit 6 */
+
+#define WWDG_CFR_WDGTB ((uint32_t)0x0180) /*!<WDGTB[1:0] bits (Timer Base) */
+#define WWDG_CFR_WDGTB0 ((uint32_t)0x0080) /*!<Bit 0 */
+#define WWDG_CFR_WDGTB1 ((uint32_t)0x0100) /*!<Bit 1 */
+
+#define WWDG_CFR_EWI ((uint32_t)0x0200) /*!<Early Wakeup Interrupt */
+
+/******************* Bit definition for WWDG_SR register ********************/
+#define WWDG_SR_EWIF ((uint32_t)0x01) /*!<Early Wakeup Interrupt Flag */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+
+/** @addtogroup Exported_macro
+ * @{
+ */
+
+/****************************** ADC Instances *********************************/
+#define IS_ADC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == ADC1)
+
+#define IS_ADC_COMMON_INSTANCE(INSTANCE) ((INSTANCE) == ADC)
+
+/****************************** CRC Instances *********************************/
+#define IS_CRC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CRC)
+
+/******************************* DMA Instances ******************************/
+#define IS_DMA_ALL_INSTANCE(INSTANCE) (((INSTANCE) == DMA1_Channel1) || \
+ ((INSTANCE) == DMA1_Channel2) || \
+ ((INSTANCE) == DMA1_Channel3) || \
+ ((INSTANCE) == DMA1_Channel4) || \
+ ((INSTANCE) == DMA1_Channel5))
+
+/****************************** GPIO Instances ********************************/
+#define IS_GPIO_ALL_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB) || \
+ ((INSTANCE) == GPIOC) || \
+ ((INSTANCE) == GPIOD) || \
+ ((INSTANCE) == GPIOF))
+
+#define IS_GPIO_AF_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB))
+
+#define IS_GPIO_LOCK_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB))
+
+/****************************** I2C Instances *********************************/
+#define IS_I2C_ALL_INSTANCE(INSTANCE) (((INSTANCE) == I2C1) || \
+ ((INSTANCE) == I2C2))
+
+/****************************** IWDG Instances ********************************/
+#define IS_IWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == IWDG)
+
+/****************************** RTC Instances *********************************/
+#define IS_RTC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == RTC)
+
+/****************************** SMBUS Instances *********************************/
+#define IS_SMBUS_ALL_INSTANCE(INSTANCE) ((INSTANCE) == I2C1)
+
+/****************************** SPI Instances *********************************/
+#define IS_SPI_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
+ ((INSTANCE) == SPI2))
+
+/****************************** TIM Instances *********************************/
+#define IS_TIM_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM6) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CC1_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CC2_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_CC3_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CC4_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_TIX_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_ENCODER_INTERFACE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_HALL_INTERFACE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1))
+
+#define IS_TIM_XOR_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_MASTER_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_SLAVE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_32B_COUNTER_INSTANCE(INSTANCE) (0)
+
+#define IS_TIM_DMABURST_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_BREAK_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CCX_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM3) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM14) && \
+ (((CHANNEL) == TIM_CHANNEL_1))) \
+ || \
+ (((INSTANCE) == TIM15) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))) \
+ || \
+ (((INSTANCE) == TIM16) && \
+ (((CHANNEL) == TIM_CHANNEL_1))) \
+ || \
+ (((INSTANCE) == TIM17) && \
+ (((CHANNEL) == TIM_CHANNEL_1))))
+
+#define IS_TIM_CCXN_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3))) \
+ || \
+ (((INSTANCE) == TIM15) && \
+ ((CHANNEL) == TIM_CHANNEL_1)) \
+ || \
+ (((INSTANCE) == TIM16) && \
+ ((CHANNEL) == TIM_CHANNEL_1)) \
+ || \
+ (((INSTANCE) == TIM17) && \
+ ((CHANNEL) == TIM_CHANNEL_1)))
+
+#define IS_TIM_COUNTER_MODE_SELECT_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_REPETITION_COUNTER_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CLOCK_DIVISION_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_DMA_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM6) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_DMA_CC_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_COMMUTATION_EVENT_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_REMAP_INSTANCE(INSTANCE)\
+ ((INSTANCE) == TIM14)
+
+/******************** USART Instances : Synchronous mode **********************/
+#define IS_USART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/******************** USART Instances : auto Baud rate detection **************/
+#define IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(INSTANCE) ((INSTANCE) == USART1)
+
+/******************** UART Instances : Asynchronous mode **********************/
+#define IS_UART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/******************** UART Instances : Half-Duplex mode **********************/
+#define IS_UART_HALFDUPLEX_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/****************** UART Instances : Hardware Flow control ********************/
+#define IS_UART_HWFLOW_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/****************** UART Instances : Auto Baud Rate detection ********************/
+#define IS_UART_AUTOBAUDRATE_DETECTION_INSTANCE(INSTANCE) ((INSTANCE) == USART1)
+
+/****************** UART Instances : Driver enable detection ********************/
+#define IS_UART_DRIVER_ENABLE_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/****************************** WWDG Instances ********************************/
+#define IS_WWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == WWDG)
+
+/**
+ * @}
+ */
+
+
+/******************************************************************************/
+/* For a painless codes migration between the STM32F0xx device product */
+/* lines, the aliases defined below are put in place to overcome the */
+/* differences in the interrupt handlers and IRQn definitions. */
+/* No need to update developed interrupt code when moving across */
+/* product lines within the same STM32F0 Family */
+/******************************************************************************/
+
+/* Aliases for __IRQn */
+#define RCC_CRS_IRQn RCC_IRQn
+#define DMA1_Channel4_5_6_7_IRQn DMA1_Channel4_5_IRQn
+#define ADC1_COMP_IRQn ADC1_IRQn
+#define TIM6_DAC_IRQn TIM6_IRQn
+
+/* Aliases for __IRQHandler */
+#define RCC_CRS_IRQHandler RCC_IRQHandler
+#define DMA1_Channel4_5_6_7_IRQHandler DMA1_Channel4_5_IRQHandler
+#define ADC1_COMP_IRQHandler ADC1_IRQHandler
+#define TIM6_DAC_IRQHandler TIM6_IRQHandler
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F030x8_H */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/include/devices/stm32f030xc.h b/f0/include/devices/stm32f030xc.h
new file mode 100755
index 0000000000000000000000000000000000000000..06524e532d2f21eeefb34fb869a42326bf8d6c9a
--- /dev/null
+++ b/f0/include/devices/stm32f030xc.h
@@ -0,0 +1,3357 @@
+/**
+ ******************************************************************************
+ * @file stm32f030xc.h
+ * @author MCD Application Team
+ * @version V2.2.1
+ * @date 09-January-2015
+ * @brief CMSIS STM32F030xC devices Peripheral Access Layer Header File.
+ *
+ * This file contains:
+ * - Data structures and the address mapping for all peripherals
+ * - Peripheral's registers declarations and bits definition
+ * - Macros to access peripheral’s registers hardware
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS_Device
+ * @{
+ */
+
+/** @addtogroup stm32f030xc
+ * @{
+ */
+
+#ifndef __STM32F030xC_H
+#define __STM32F030xC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+
+/**
+ * @brief Configuration of the Cortex-M0 Processor and Core Peripherals
+ */
+#define __CM0_REV 0 /*!< Core Revision r0p0 */
+#define __MPU_PRESENT 0 /*!< STM32F0xx do not provide MPU */
+#define __NVIC_PRIO_BITS 2 /*!< STM32F0xx uses 2 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F030xC device Interrupt Number Definition
+ */
+typedef enum
+{
+/****** Cortex-M0 Processor Exceptions Numbers **************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */
+ SVC_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */
+
+/****** STM32F030xC specific Interrupt Numbers **************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ RTC_IRQn = 2, /*!< RTC Interrupt through EXTI Lines 17, 19 and 20 */
+ FLASH_IRQn = 3, /*!< FLASH global Interrupt */
+ RCC_IRQn = 4, /*!< RCC Global Interrupts */
+ EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupts */
+ EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupts */
+ EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupts */
+ DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */
+ DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupts */
+ DMA1_Channel4_5_IRQn = 11, /*!< DMA1 Channel 4 and Channel 5 Interrupts */
+ ADC1_IRQn = 12, /*!< ADC Interrupts */
+ TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupts */
+ TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */
+ TIM3_IRQn = 16, /*!< TIM3 global Interrupt */
+ TIM6_IRQn = 17, /*!< TIM6 global Interrupts */
+ TIM7_IRQn = 18, /*!< TIM7 global Interrupt */
+ TIM14_IRQn = 19, /*!< TIM14 global Interrupt */
+ TIM15_IRQn = 20, /*!< TIM15 global Interrupt */
+ TIM16_IRQn = 21, /*!< TIM16 global Interrupt */
+ TIM17_IRQn = 22, /*!< TIM17 global Interrupt */
+ I2C1_IRQn = 23, /*!< I2C1 Event Interrupt & EXTI Line23 Interrupt (I2C1 wakeup) */
+ I2C2_IRQn = 24, /*!< I2C2 Event Interrupt */
+ SPI1_IRQn = 25, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 26, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 27, /*!< USART1 global Interrupt & EXTI Line25 Interrupt (USART1 wakeup) */
+ USART2_IRQn = 28, /*!< USART2 global Interrupt & EXTI Line26 Interrupt (USART2 wakeup) */
+ USART3_6_IRQn = 29, /*!< USART3 to USART6 global Interrupts */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm0.h" /* Cortex-M0 processor and core peripherals */
+#include "system_stm32f0xx.h" /* STM32F0xx System Header */
+#include <stdint.h>
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< ADC Interrupt and Status register, Address offset:0x00 */
+ __IO uint32_t IER; /*!< ADC Interrupt Enable register, Address offset:0x04 */
+ __IO uint32_t CR; /*!< ADC Control register, Address offset:0x08 */
+ __IO uint32_t CFGR1; /*!< ADC Configuration register 1, Address offset:0x0C */
+ __IO uint32_t CFGR2; /*!< ADC Configuration register 2, Address offset:0x10 */
+ __IO uint32_t SMPR; /*!< ADC Sampling time register, Address offset:0x14 */
+ uint32_t RESERVED1; /*!< Reserved, 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, 0x1C */
+ __IO uint32_t TR; /*!< ADC watchdog threshold register, Address offset:0x20 */
+ uint32_t RESERVED3; /*!< Reserved, 0x24 */
+ __IO uint32_t CHSELR; /*!< ADC channel selection register, Address offset:0x28 */
+ uint32_t RESERVED4[5]; /*!< Reserved, 0x2C */
+ __IO uint32_t DR; /*!< ADC data register, Address offset:0x40 */
+}ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CCR;
+}ADC_Common_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+ uint32_t RESERVED2; /*!< Reserved, 0x0C */
+ __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */
+ __IO uint32_t RESERVED3; /*!< Reserved, 0x14 */
+}CRC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< DMA channel x configuration register */
+ __IO uint32_t CNDTR; /*!< DMA channel x number of data register */
+ __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */
+ __IO uint32_t CMAR; /*!< DMA channel x memory address register */
+}DMA_Channel_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */
+ __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */
+ uint32_t RESERVED0[40];/*!< Reserved as declared by channel typedef 0x08 - 0xA4 */
+ __IO uint32_t CSELR; /*!< Channel selection register, Address offset: 0xA8 */
+}DMA_TypeDef;
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!<EXTI Interrupt mask register, Address offset: 0x00 */
+ __IO uint32_t EMR; /*!<EXTI Event mask register, Address offset: 0x04 */
+ __IO uint32_t RTSR; /*!<EXTI Rising trigger selection register , Address offset: 0x08 */
+ __IO uint32_t FTSR; /*!<EXTI Falling trigger selection register, Address offset: 0x0C */
+ __IO uint32_t SWIER; /*!<EXTI Software interrupt event register, Address offset: 0x10 */
+ __IO uint32_t PR; /*!<EXTI Pending register, Address offset: 0x14 */
+}EXTI_TypeDef;
+
+/**
+ * @brief FLASH Registers
+ */
+typedef struct
+{
+ __IO uint32_t ACR; /*!<FLASH access control register, Address offset: 0x00 */
+ __IO uint32_t KEYR; /*!<FLASH key register, Address offset: 0x04 */
+ __IO uint32_t OPTKEYR; /*!<FLASH OPT key register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!<FLASH status register, Address offset: 0x0C */
+ __IO uint32_t CR; /*!<FLASH control register, Address offset: 0x10 */
+ __IO uint32_t AR; /*!<FLASH address register, Address offset: 0x14 */
+ __IO uint32_t RESERVED; /*!< Reserved, 0x18 */
+ __IO uint32_t OBR; /*!<FLASH option bytes register, Address offset: 0x1C */
+ __IO uint32_t WRPR; /*!<FLASH option bytes register, Address offset: 0x20 */
+}FLASH_TypeDef;
+
+
+/**
+ * @brief Option Bytes Registers
+ */
+typedef struct
+{
+ __IO uint16_t RDP; /*!< FLASH option byte Read protection, Address offset: 0x00 */
+ __IO uint16_t USER; /*!< FLASH option byte user options, Address offset: 0x02 */
+ __IO uint16_t DATA0; /*!< User data byte 0 (stored in FLASH_OBR[23:16]), Address offset: 0x04 */
+ __IO uint16_t DATA1; /*!< User data byte 1 (stored in FLASH_OBR[31:24]), Address offset: 0x06 */
+ __IO uint16_t WRP0; /*!< FLASH option byte write protection 0, Address offset: 0x08 */
+ __IO uint16_t WRP1; /*!< FLASH option byte write protection 1, Address offset: 0x0A */
+ __IO uint16_t WRP2; /*!< FLASH option byte write protection 2, Address offset: 0x0C */
+ __IO uint16_t WRP3; /*!< FLASH option byte write protection 3, Address offset: 0x0E */
+}OB_TypeDef;
+
+/**
+ * @brief General Purpose I/O
+ */
+
+typedef struct
+{
+ __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */
+ __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */
+ __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */
+ __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */
+ __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */
+ __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */
+ __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x1A */
+ __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */
+ __IO uint32_t AFR[2]; /*!< GPIO alternate function low register, Address offset: 0x20-0x24 */
+ __IO uint32_t BRR; /*!< GPIO bit reset register, Address offset: 0x28 */
+}GPIO_TypeDef;
+
+/**
+ * @brief SysTem Configuration
+ */
+
+typedef struct
+{
+ __IO uint32_t CFGR1; /*!< SYSCFG configuration register 1, Address offset: 0x00 */
+ uint32_t RESERVED; /*!< Reserved, 0x04 */
+ __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration register, Address offset: 0x14-0x08 */
+ __IO uint32_t CFGR2; /*!< SYSCFG configuration register 2, Address offset: 0x18 */
+}SYSCFG_TypeDef;
+
+/**
+ * @brief Inter-integrated Circuit Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */
+ __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */
+ __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */
+ __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */
+ __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */
+ __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */
+ __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */
+ __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */
+ __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */
+ __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */
+}I2C_TypeDef;
+
+/**
+ * @brief Independent WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */
+ __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */
+ __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */
+ __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */
+}IWDG_TypeDef;
+
+/**
+ * @brief Power Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< PWR power control register, Address offset: 0x00 */
+ __IO uint32_t CSR; /*!< PWR power control/status register, Address offset: 0x04 */
+}PWR_TypeDef;
+
+/**
+ * @brief Reset and Clock Control
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */
+ __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x04 */
+ __IO uint32_t CIR; /*!< RCC clock interrupt register, Address offset: 0x08 */
+ __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x0C */
+ __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x10 */
+ __IO uint32_t AHBENR; /*!< RCC AHB peripheral clock register, Address offset: 0x14 */
+ __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x18 */
+ __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x1C */
+ __IO uint32_t BDCR; /*!< RCC Backup domain control register, Address offset: 0x20 */
+ __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x24 */
+ __IO uint32_t AHBRSTR; /*!< RCC AHB peripheral reset register, Address offset: 0x28 */
+ __IO uint32_t CFGR2; /*!< RCC clock configuration register 2, Address offset: 0x2C */
+ __IO uint32_t CFGR3; /*!< RCC clock configuration register 3, Address offset: 0x30 */
+ __IO uint32_t CR2; /*!< RCC clock control register 2, Address offset: 0x34 */
+}RCC_TypeDef;
+
+/**
+ * @brief Real-Time Clock
+ */
+
+typedef struct
+{
+ __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */
+ __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */
+ __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */
+ uint32_t RESERVED1; /*!< Reserved, Address offset: 0x18 */
+ __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */
+ uint32_t RESERVED2; /*!< Reserved, Address offset: 0x20 */
+ __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */
+ __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */
+ __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */
+ __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */
+ __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */
+ __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */
+ __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */
+ __IO uint32_t TAFCR; /*!< RTC tamper and alternate function configuration register, Address offset: 0x40 */
+ __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */
+}RTC_TypeDef;
+
+/**
+ * @brief Serial Peripheral Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< SPI Control register 1 (not used in I2S mode), Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */
+ __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */
+ __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */
+ __IO uint32_t RXCRCR; /*!< SPI Rx CRC register (not used in I2S mode), Address offset: 0x14 */
+ __IO uint32_t TXCRCR; /*!< SPI Tx CRC register (not used in I2S mode), Address offset: 0x18 */
+ __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */
+ __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */
+}SPI_TypeDef;
+
+/**
+ * @brief TIM
+ */
+typedef struct
+{
+ __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */
+ __IO uint32_t SMCR; /*!< TIM slave Mode Control register, Address offset: 0x08 */
+ __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */
+ __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */
+ __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */
+ __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */
+ __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */
+ __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */
+ __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */
+ __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */
+ __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */
+ __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */
+ __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */
+ __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */
+ __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */
+ __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */
+ __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */
+ __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */
+ __IO uint32_t DMAR; /*!< TIM DMA address for full transfer register, Address offset: 0x4C */
+ __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */
+}TIM_TypeDef;
+
+
+/**
+ * @brief Universal Synchronous Asynchronous Receiver Transmitter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */
+ __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */
+ __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */
+ __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */
+ __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */
+ __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */
+ __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */
+ __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */
+ __IO uint16_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */
+ uint16_t RESERVED1; /*!< Reserved, 0x26 */
+ __IO uint16_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */
+ uint16_t RESERVED2; /*!< Reserved, 0x2A */
+}USART_TypeDef;
+
+/**
+ * @brief Window WATCHDOG
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */
+ __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */
+}WWDG_TypeDef;
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_memory_map
+ * @{
+ */
+
+#define FLASH_BASE ((uint32_t)0x08000000) /*!< FLASH base address in the alias region */
+#define SRAM_BASE ((uint32_t)0x20000000) /*!< SRAM base address in the alias region */
+#define PERIPH_BASE ((uint32_t)0x40000000) /*!< Peripheral base address in the alias region */
+
+/*!< Peripheral memory map */
+#define APBPERIPH_BASE PERIPH_BASE
+#define AHBPERIPH_BASE (PERIPH_BASE + 0x00020000)
+#define AHB2PERIPH_BASE (PERIPH_BASE + 0x08000000)
+
+#define TIM3_BASE (APBPERIPH_BASE + 0x00000400)
+#define TIM6_BASE (APBPERIPH_BASE + 0x00001000)
+#define TIM7_BASE (APBPERIPH_BASE + 0x00001400)
+#define TIM14_BASE (APBPERIPH_BASE + 0x00002000)
+#define RTC_BASE (APBPERIPH_BASE + 0x00002800)
+#define WWDG_BASE (APBPERIPH_BASE + 0x00002C00)
+#define IWDG_BASE (APBPERIPH_BASE + 0x00003000)
+#define SPI2_BASE (APBPERIPH_BASE + 0x00003800)
+#define USART2_BASE (APBPERIPH_BASE + 0x00004400)
+#define USART3_BASE (APBPERIPH_BASE + 0x00004800)
+#define USART4_BASE (APBPERIPH_BASE + 0x00004C00)
+#define USART5_BASE (APBPERIPH_BASE + 0x00005000)
+#define I2C1_BASE (APBPERIPH_BASE + 0x00005400)
+#define I2C2_BASE (APBPERIPH_BASE + 0x00005800)
+#define PWR_BASE (APBPERIPH_BASE + 0x00007000)
+
+#define SYSCFG_BASE (APBPERIPH_BASE + 0x00010000)
+#define EXTI_BASE (APBPERIPH_BASE + 0x00010400)
+#define USART6_BASE (APBPERIPH_BASE + 0x00011400)
+#define ADC1_BASE (APBPERIPH_BASE + 0x00012400)
+#define ADC_BASE (APBPERIPH_BASE + 0x00012708)
+#define TIM1_BASE (APBPERIPH_BASE + 0x00012C00)
+#define SPI1_BASE (APBPERIPH_BASE + 0x00013000)
+#define USART1_BASE (APBPERIPH_BASE + 0x00013800)
+#define TIM15_BASE (APBPERIPH_BASE + 0x00014000)
+#define TIM16_BASE (APBPERIPH_BASE + 0x00014400)
+#define TIM17_BASE (APBPERIPH_BASE + 0x00014800)
+#define DBGMCU_BASE (APBPERIPH_BASE + 0x00015800)
+
+/*!< AHB1 peripherals */
+#define DMA1_BASE (AHBPERIPH_BASE + 0x00000000)
+#define DMA1_Channel1_BASE (DMA1_BASE + 0x00000008)
+#define DMA1_Channel2_BASE (DMA1_BASE + 0x0000001C)
+#define DMA1_Channel3_BASE (DMA1_BASE + 0x00000030)
+#define DMA1_Channel4_BASE (DMA1_BASE + 0x00000044)
+#define DMA1_Channel5_BASE (DMA1_BASE + 0x00000058)
+
+#define RCC_BASE (AHBPERIPH_BASE + 0x00001000)
+#define FLASH_R_BASE (AHBPERIPH_BASE + 0x00002000) /*!< FLASH registers base address */
+#define OB_BASE ((uint32_t)0x1FFFF800) /*!< FLASH Option Bytes base address */
+#define CRC_BASE (AHBPERIPH_BASE + 0x00003000)
+
+#define GPIOA_BASE (AHB2PERIPH_BASE + 0x00000000)
+#define GPIOB_BASE (AHB2PERIPH_BASE + 0x00000400)
+#define GPIOC_BASE (AHB2PERIPH_BASE + 0x00000800)
+#define GPIOD_BASE (AHB2PERIPH_BASE + 0x00000C00)
+#define GPIOE_BASE (AHB2PERIPH_BASE + 0x00001000)
+#define GPIOF_BASE (AHB2PERIPH_BASE + 0x00001400)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_declaration
+ * @{
+ */
+
+#define TIM3 ((TIM_TypeDef *) TIM3_BASE)
+#define TIM6 ((TIM_TypeDef *) TIM6_BASE)
+#define TIM7 ((TIM_TypeDef *) TIM7_BASE)
+#define TIM14 ((TIM_TypeDef *) TIM14_BASE)
+#define RTC ((RTC_TypeDef *) RTC_BASE)
+#define WWDG ((WWDG_TypeDef *) WWDG_BASE)
+#define IWDG ((IWDG_TypeDef *) IWDG_BASE)
+#define SPI2 ((SPI_TypeDef *) SPI2_BASE)
+#define USART2 ((USART_TypeDef *) USART2_BASE)
+#define USART3 ((USART_TypeDef *) USART3_BASE)
+#define USART4 ((USART_TypeDef *) USART4_BASE)
+#define USART5 ((USART_TypeDef *) USART5_BASE)
+#define I2C1 ((I2C_TypeDef *) I2C1_BASE)
+#define I2C2 ((I2C_TypeDef *) I2C2_BASE)
+#define PWR ((PWR_TypeDef *) PWR_BASE)
+#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE)
+#define EXTI ((EXTI_TypeDef *) EXTI_BASE)
+#define USART6 ((USART_TypeDef *) USART6_BASE)
+#define ADC1 ((ADC_TypeDef *) ADC1_BASE)
+#define ADC ((ADC_Common_TypeDef *) ADC_BASE)
+#define TIM1 ((TIM_TypeDef *) TIM1_BASE)
+#define SPI1 ((SPI_TypeDef *) SPI1_BASE)
+#define USART1 ((USART_TypeDef *) USART1_BASE)
+#define TIM15 ((TIM_TypeDef *) TIM15_BASE)
+#define TIM16 ((TIM_TypeDef *) TIM16_BASE)
+#define TIM17 ((TIM_TypeDef *) TIM17_BASE)
+#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE)
+#define DMA1 ((DMA_TypeDef *) DMA1_BASE)
+#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE)
+#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE)
+#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE)
+#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE)
+#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE)
+#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE)
+#define OB ((OB_TypeDef *) OB_BASE)
+#define RCC ((RCC_TypeDef *) RCC_BASE)
+#define CRC ((CRC_TypeDef *) CRC_BASE)
+#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE)
+#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE)
+#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE)
+#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE)
+#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE)
+#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_constants
+ * @{
+ */
+
+ /** @addtogroup Peripheral_Registers_Bits_Definition
+ * @{
+ */
+
+/******************************************************************************/
+/* Peripheral Registers Bits Definition */
+/******************************************************************************/
+/******************************************************************************/
+/* */
+/* Analog to Digital Converter (ADC) */
+/* */
+/******************************************************************************/
+/******************** Bits definition for ADC_ISR register ******************/
+#define ADC_ISR_AWD ((uint32_t)0x00000080) /*!< Analog watchdog flag */
+#define ADC_ISR_OVR ((uint32_t)0x00000010) /*!< Overrun flag */
+#define ADC_ISR_EOSEQ ((uint32_t)0x00000008) /*!< End of Sequence flag */
+#define ADC_ISR_EOC ((uint32_t)0x00000004) /*!< End of Conversion */
+#define ADC_ISR_EOSMP ((uint32_t)0x00000002) /*!< End of sampling flag */
+#define ADC_ISR_ADRDY ((uint32_t)0x00000001) /*!< ADC Ready */
+
+/* Old EOSEQ bit definition, maintained for legacy purpose */
+#define ADC_ISR_EOS ADC_ISR_EOSEQ
+
+/******************** Bits definition for ADC_IER register ******************/
+#define ADC_IER_AWDIE ((uint32_t)0x00000080) /*!< Analog Watchdog interrupt enable */
+#define ADC_IER_OVRIE ((uint32_t)0x00000010) /*!< Overrun interrupt enable */
+#define ADC_IER_EOSEQIE ((uint32_t)0x00000008) /*!< End of Sequence of conversion interrupt enable */
+#define ADC_IER_EOCIE ((uint32_t)0x00000004) /*!< End of Conversion interrupt enable */
+#define ADC_IER_EOSMPIE ((uint32_t)0x00000002) /*!< End of sampling interrupt enable */
+#define ADC_IER_ADRDYIE ((uint32_t)0x00000001) /*!< ADC Ready interrupt enable */
+
+/* Old EOSEQIE bit definition, maintained for legacy purpose */
+#define ADC_IER_EOSIE ADC_IER_EOSEQIE
+
+/******************** Bits definition for ADC_CR register *******************/
+#define ADC_CR_ADCAL ((uint32_t)0x80000000) /*!< ADC calibration */
+#define ADC_CR_ADSTP ((uint32_t)0x00000010) /*!< ADC stop of conversion command */
+#define ADC_CR_ADSTART ((uint32_t)0x00000004) /*!< ADC start of conversion */
+#define ADC_CR_ADDIS ((uint32_t)0x00000002) /*!< ADC disable command */
+#define ADC_CR_ADEN ((uint32_t)0x00000001) /*!< ADC enable control */
+
+/******************* Bits definition for ADC_CFGR1 register *****************/
+#define ADC_CFGR1_AWDCH ((uint32_t)0x7C000000) /*!< AWDCH[4:0] bits (Analog watchdog channel select bits) */
+#define ADC_CFGR1_AWDCH_0 ((uint32_t)0x04000000) /*!< Bit 0 */
+#define ADC_CFGR1_AWDCH_1 ((uint32_t)0x08000000) /*!< Bit 1 */
+#define ADC_CFGR1_AWDCH_2 ((uint32_t)0x10000000) /*!< Bit 2 */
+#define ADC_CFGR1_AWDCH_3 ((uint32_t)0x20000000) /*!< Bit 3 */
+#define ADC_CFGR1_AWDCH_4 ((uint32_t)0x40000000) /*!< Bit 4 */
+#define ADC_CFGR1_AWDEN ((uint32_t)0x00800000) /*!< Analog watchdog enable on regular channels */
+#define ADC_CFGR1_AWDSGL ((uint32_t)0x00400000) /*!< Enable the watchdog on a single channel or on all channels */
+#define ADC_CFGR1_DISCEN ((uint32_t)0x00010000) /*!< Discontinuous mode on regular channels */
+#define ADC_CFGR1_AUTOFF ((uint32_t)0x00008000) /*!< ADC auto power off */
+#define ADC_CFGR1_WAIT ((uint32_t)0x00004000) /*!< ADC wait conversion mode */
+#define ADC_CFGR1_CONT ((uint32_t)0x00002000) /*!< Continuous Conversion */
+#define ADC_CFGR1_OVRMOD ((uint32_t)0x00001000) /*!< Overrun mode */
+#define ADC_CFGR1_EXTEN ((uint32_t)0x00000C00) /*!< EXTEN[1:0] bits (External Trigger Conversion mode for regular channels) */
+#define ADC_CFGR1_EXTEN_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define ADC_CFGR1_EXTEN_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define ADC_CFGR1_EXTSEL ((uint32_t)0x000001C0) /*!< EXTSEL[2:0] bits (External Event Select for regular group) */
+#define ADC_CFGR1_EXTSEL_0 ((uint32_t)0x00000040) /*!< Bit 0 */
+#define ADC_CFGR1_EXTSEL_1 ((uint32_t)0x00000080) /*!< Bit 1 */
+#define ADC_CFGR1_EXTSEL_2 ((uint32_t)0x00000100) /*!< Bit 2 */
+#define ADC_CFGR1_ALIGN ((uint32_t)0x00000020) /*!< Data Alignment */
+#define ADC_CFGR1_RES ((uint32_t)0x00000018) /*!< RES[1:0] bits (Resolution) */
+#define ADC_CFGR1_RES_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define ADC_CFGR1_RES_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define ADC_CFGR1_SCANDIR ((uint32_t)0x00000004) /*!< Sequence scan direction */
+#define ADC_CFGR1_DMACFG ((uint32_t)0x00000002) /*!< Direct memory access configuration */
+#define ADC_CFGR1_DMAEN ((uint32_t)0x00000001) /*!< Direct memory access enable */
+
+/* Old WAIT bit definition, maintained for legacy purpose */
+#define ADC_CFGR1_AUTDLY ADC_CFGR1_WAIT
+
+/******************* Bits definition for ADC_CFGR2 register *****************/
+#define ADC_CFGR2_CKMODE ((uint32_t)0xC0000000) /*!< ADC clock mode */
+#define ADC_CFGR2_CKMODE_1 ((uint32_t)0x80000000) /*!< ADC clocked by PCLK div4 */
+#define ADC_CFGR2_CKMODE_0 ((uint32_t)0x40000000) /*!< ADC clocked by PCLK div2 */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_CFGR2_JITOFFDIV4 ADC_CFGR2_CKMODE_1 /*!< ADC clocked by PCLK div4 */
+#define ADC_CFGR2_JITOFFDIV2 ADC_CFGR2_CKMODE_0 /*!< ADC clocked by PCLK div2 */
+
+/****************** Bit definition for ADC_SMPR register ********************/
+#define ADC_SMPR_SMP ((uint32_t)0x00000007) /*!< SMP[2:0] bits (Sampling time selection) */
+#define ADC_SMPR_SMP_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define ADC_SMPR_SMP_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define ADC_SMPR_SMP_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_SMPR1_SMPR ADC_SMPR_SMP /*!< SMP[2:0] bits (Sampling time selection) */
+#define ADC_SMPR1_SMPR_0 ADC_SMPR_SMP_0 /*!< Bit 0 */
+#define ADC_SMPR1_SMPR_1 ADC_SMPR_SMP_1 /*!< Bit 1 */
+#define ADC_SMPR1_SMPR_2 ADC_SMPR_SMP_2 /*!< Bit 2 */
+
+/******************* Bit definition for ADC_TR register ********************/
+#define ADC_TR_HT ((uint32_t)0x0FFF0000) /*!< Analog watchdog high threshold */
+#define ADC_TR_LT ((uint32_t)0x00000FFF) /*!< Analog watchdog low threshold */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_HTR_HT ADC_TR_HT /*!< Analog watchdog high threshold */
+#define ADC_LTR_LT ADC_TR_LT /*!< Analog watchdog low threshold */
+
+/****************** Bit definition for ADC_CHSELR register ******************/
+#define ADC_CHSELR_CHSEL18 ((uint32_t)0x00040000) /*!< Channel 18 selection */
+#define ADC_CHSELR_CHSEL17 ((uint32_t)0x00020000) /*!< Channel 17 selection */
+#define ADC_CHSELR_CHSEL16 ((uint32_t)0x00010000) /*!< Channel 16 selection */
+#define ADC_CHSELR_CHSEL15 ((uint32_t)0x00008000) /*!< Channel 15 selection */
+#define ADC_CHSELR_CHSEL14 ((uint32_t)0x00004000) /*!< Channel 14 selection */
+#define ADC_CHSELR_CHSEL13 ((uint32_t)0x00002000) /*!< Channel 13 selection */
+#define ADC_CHSELR_CHSEL12 ((uint32_t)0x00001000) /*!< Channel 12 selection */
+#define ADC_CHSELR_CHSEL11 ((uint32_t)0x00000800) /*!< Channel 11 selection */
+#define ADC_CHSELR_CHSEL10 ((uint32_t)0x00000400) /*!< Channel 10 selection */
+#define ADC_CHSELR_CHSEL9 ((uint32_t)0x00000200) /*!< Channel 9 selection */
+#define ADC_CHSELR_CHSEL8 ((uint32_t)0x00000100) /*!< Channel 8 selection */
+#define ADC_CHSELR_CHSEL7 ((uint32_t)0x00000080) /*!< Channel 7 selection */
+#define ADC_CHSELR_CHSEL6 ((uint32_t)0x00000040) /*!< Channel 6 selection */
+#define ADC_CHSELR_CHSEL5 ((uint32_t)0x00000020) /*!< Channel 5 selection */
+#define ADC_CHSELR_CHSEL4 ((uint32_t)0x00000010) /*!< Channel 4 selection */
+#define ADC_CHSELR_CHSEL3 ((uint32_t)0x00000008) /*!< Channel 3 selection */
+#define ADC_CHSELR_CHSEL2 ((uint32_t)0x00000004) /*!< Channel 2 selection */
+#define ADC_CHSELR_CHSEL1 ((uint32_t)0x00000002) /*!< Channel 1 selection */
+#define ADC_CHSELR_CHSEL0 ((uint32_t)0x00000001) /*!< Channel 0 selection */
+
+/******************** Bit definition for ADC_DR register ********************/
+#define ADC_DR_DATA ((uint32_t)0x0000FFFF) /*!< Regular data */
+
+/******************* Bit definition for ADC_CCR register ********************/
+#define ADC_CCR_VBATEN ((uint32_t)0x01000000) /*!< Voltage battery enable */
+#define ADC_CCR_TSEN ((uint32_t)0x00800000) /*!< Tempurature sensore enable */
+#define ADC_CCR_VREFEN ((uint32_t)0x00400000) /*!< Vrefint enable */
+
+/******************************************************************************/
+/* */
+/* CRC calculation unit (CRC) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for CRC_DR register *********************/
+#define CRC_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data register bits */
+
+/******************* Bit definition for CRC_IDR register ********************/
+#define CRC_IDR_IDR ((uint8_t)0xFF) /*!< General-purpose 8-bit data register bits */
+
+/******************** Bit definition for CRC_CR register ********************/
+#define CRC_CR_RESET ((uint32_t)0x00000001) /*!< RESET the CRC computation unit bit */
+#define CRC_CR_POLYSIZE ((uint32_t)0x00000018) /*!< Polynomial size bits */
+#define CRC_CR_POLYSIZE_0 ((uint32_t)0x00000008) /*!< Polynomial size bit 0 */
+#define CRC_CR_POLYSIZE_1 ((uint32_t)0x00000010) /*!< Polynomial size bit 1 */
+#define CRC_CR_REV_IN ((uint32_t)0x00000060) /*!< REV_IN Reverse Input Data bits */
+#define CRC_CR_REV_IN_0 ((uint32_t)0x00000020) /*!< REV_IN Bit 0 */
+#define CRC_CR_REV_IN_1 ((uint32_t)0x00000040) /*!< REV_IN Bit 1 */
+#define CRC_CR_REV_OUT ((uint32_t)0x00000080) /*!< REV_OUT Reverse Output Data bits */
+
+/******************* Bit definition for CRC_INIT register *******************/
+#define CRC_INIT_INIT ((uint32_t)0xFFFFFFFF) /*!< Initial CRC value bits */
+
+/******************* Bit definition for CRC_POL register ********************/
+#define CRC_POL_POL ((uint32_t)0xFFFFFFFF) /*!< Coefficients of the polynomial */
+
+/******************************************************************************/
+/* */
+/* Debug MCU (DBGMCU) */
+/* */
+/******************************************************************************/
+
+/**************** Bit definition for DBGMCU_IDCODE register *****************/
+#define DBGMCU_IDCODE_DEV_ID ((uint32_t)0x00000FFF) /*!< Device Identifier */
+
+#define DBGMCU_IDCODE_REV_ID ((uint32_t)0xFFFF0000) /*!< REV_ID[15:0] bits (Revision Identifier) */
+#define DBGMCU_IDCODE_REV_ID_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define DBGMCU_IDCODE_REV_ID_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define DBGMCU_IDCODE_REV_ID_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define DBGMCU_IDCODE_REV_ID_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+#define DBGMCU_IDCODE_REV_ID_4 ((uint32_t)0x00100000) /*!< Bit 4 */
+#define DBGMCU_IDCODE_REV_ID_5 ((uint32_t)0x00200000) /*!< Bit 5 */
+#define DBGMCU_IDCODE_REV_ID_6 ((uint32_t)0x00400000) /*!< Bit 6 */
+#define DBGMCU_IDCODE_REV_ID_7 ((uint32_t)0x00800000) /*!< Bit 7 */
+#define DBGMCU_IDCODE_REV_ID_8 ((uint32_t)0x01000000) /*!< Bit 8 */
+#define DBGMCU_IDCODE_REV_ID_9 ((uint32_t)0x02000000) /*!< Bit 9 */
+#define DBGMCU_IDCODE_REV_ID_10 ((uint32_t)0x04000000) /*!< Bit 10 */
+#define DBGMCU_IDCODE_REV_ID_11 ((uint32_t)0x08000000) /*!< Bit 11 */
+#define DBGMCU_IDCODE_REV_ID_12 ((uint32_t)0x10000000) /*!< Bit 12 */
+#define DBGMCU_IDCODE_REV_ID_13 ((uint32_t)0x20000000) /*!< Bit 13 */
+#define DBGMCU_IDCODE_REV_ID_14 ((uint32_t)0x40000000) /*!< Bit 14 */
+#define DBGMCU_IDCODE_REV_ID_15 ((uint32_t)0x80000000) /*!< Bit 15 */
+
+/****************** Bit definition for DBGMCU_CR register *******************/
+#define DBGMCU_CR_DBG_STOP ((uint32_t)0x00000002) /*!< Debug Stop Mode */
+#define DBGMCU_CR_DBG_STANDBY ((uint32_t)0x00000004) /*!< Debug Standby mode */
+
+/****************** Bit definition for DBGMCU_APB1_FZ register **************/
+#define DBGMCU_APB1_FZ_DBG_TIM3_STOP ((uint32_t)0x00000002) /*!< TIM3 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM6_STOP ((uint32_t)0x00000010) /*!< TIM6 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM7_STOP ((uint32_t)0x00000020) /*!< TIM7 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM14_STOP ((uint32_t)0x00000100) /*!< TIM14 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_RTC_STOP ((uint32_t)0x00000400) /*!< RTC Calendar frozen when core is halted */
+#define DBGMCU_APB1_FZ_DBG_WWDG_STOP ((uint32_t)0x00000800) /*!< Debug Window Watchdog stopped when Core is halted */
+#define DBGMCU_APB1_FZ_DBG_IWDG_STOP ((uint32_t)0x00001000) /*!< Debug Independent Watchdog stopped when Core is halted */
+#define DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00200000) /*!< I2C1 SMBUS timeout mode stopped when Core is halted */
+
+/****************** Bit definition for DBGMCU_APB2_FZ register **************/
+#define DBGMCU_APB2_FZ_DBG_TIM1_STOP ((uint32_t)0x00000800) /*!< TIM1 counter stopped when core is halted */
+#define DBGMCU_APB2_FZ_DBG_TIM15_STOP ((uint32_t)0x00010000) /*!< TIM15 counter stopped when core is halted */
+#define DBGMCU_APB2_FZ_DBG_TIM16_STOP ((uint32_t)0x00020000) /*!< TIM16 counter stopped when core is halted */
+#define DBGMCU_APB2_FZ_DBG_TIM17_STOP ((uint32_t)0x00040000) /*!< TIM17 counter stopped when core is halted */
+
+/******************************************************************************/
+/* */
+/* DMA Controller (DMA) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for DMA_ISR register ********************/
+#define DMA_ISR_GIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt flag */
+#define DMA_ISR_TCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete flag */
+#define DMA_ISR_HTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer flag */
+#define DMA_ISR_TEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error flag */
+#define DMA_ISR_GIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt flag */
+#define DMA_ISR_TCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete flag */
+#define DMA_ISR_HTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer flag */
+#define DMA_ISR_TEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error flag */
+#define DMA_ISR_GIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt flag */
+#define DMA_ISR_TCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete flag */
+#define DMA_ISR_HTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer flag */
+#define DMA_ISR_TEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error flag */
+#define DMA_ISR_GIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt flag */
+#define DMA_ISR_TCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete flag */
+#define DMA_ISR_HTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer flag */
+#define DMA_ISR_TEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error flag */
+#define DMA_ISR_GIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt flag */
+#define DMA_ISR_TCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete flag */
+#define DMA_ISR_HTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer flag */
+#define DMA_ISR_TEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error flag */
+
+/******************* Bit definition for DMA_IFCR register *******************/
+#define DMA_IFCR_CGIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt clear */
+#define DMA_IFCR_CTCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete clear */
+#define DMA_IFCR_CHTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer clear */
+#define DMA_IFCR_CTEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error clear */
+#define DMA_IFCR_CGIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt clear */
+#define DMA_IFCR_CTCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete clear */
+#define DMA_IFCR_CHTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer clear */
+#define DMA_IFCR_CTEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error clear */
+#define DMA_IFCR_CGIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt clear */
+#define DMA_IFCR_CTCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete clear */
+#define DMA_IFCR_CHTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer clear */
+#define DMA_IFCR_CTEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error clear */
+#define DMA_IFCR_CGIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt clear */
+#define DMA_IFCR_CTCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete clear */
+#define DMA_IFCR_CHTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer clear */
+#define DMA_IFCR_CTEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error clear */
+#define DMA_IFCR_CGIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt clear */
+#define DMA_IFCR_CTCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete clear */
+#define DMA_IFCR_CHTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer clear */
+#define DMA_IFCR_CTEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error clear */
+
+/******************* Bit definition for DMA_CCR register ********************/
+#define DMA_CCR_EN ((uint32_t)0x00000001) /*!< Channel enable */
+#define DMA_CCR_TCIE ((uint32_t)0x00000002) /*!< Transfer complete interrupt enable */
+#define DMA_CCR_HTIE ((uint32_t)0x00000004) /*!< Half Transfer interrupt enable */
+#define DMA_CCR_TEIE ((uint32_t)0x00000008) /*!< Transfer error interrupt enable */
+#define DMA_CCR_DIR ((uint32_t)0x00000010) /*!< Data transfer direction */
+#define DMA_CCR_CIRC ((uint32_t)0x00000020) /*!< Circular mode */
+#define DMA_CCR_PINC ((uint32_t)0x00000040) /*!< Peripheral increment mode */
+#define DMA_CCR_MINC ((uint32_t)0x00000080) /*!< Memory increment mode */
+
+#define DMA_CCR_PSIZE ((uint32_t)0x00000300) /*!< PSIZE[1:0] bits (Peripheral size) */
+#define DMA_CCR_PSIZE_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define DMA_CCR_PSIZE_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+
+#define DMA_CCR_MSIZE ((uint32_t)0x00000C00) /*!< MSIZE[1:0] bits (Memory size) */
+#define DMA_CCR_MSIZE_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define DMA_CCR_MSIZE_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+
+#define DMA_CCR_PL ((uint32_t)0x00003000) /*!< PL[1:0] bits(Channel Priority level)*/
+#define DMA_CCR_PL_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define DMA_CCR_PL_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+
+#define DMA_CCR_MEM2MEM ((uint32_t)0x00004000) /*!< Memory to memory mode */
+
+/****************** Bit definition for DMA_CNDTR register *******************/
+#define DMA_CNDTR_NDT ((uint32_t)0x0000FFFF) /*!< Number of data to Transfer */
+
+/****************** Bit definition for DMA_CPAR register ********************/
+#define DMA_CPAR_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */
+
+/****************** Bit definition for DMA_CMAR register ********************/
+#define DMA_CMAR_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */
+
+/****************** Bit definition for DMA1_CSELR register ********************/
+#define DMA1_CSELR_DEFAULT ((uint32_t)0x00000000) /*!< Default remap position for DMA1 */
+#define DMA1_CSELR_CH1_ADC ((uint32_t)0x00000001) /*!< Remap ADC on DMA1 Channel 1*/
+#define DMA1_CSELR_CH1_TIM17_CH1 ((uint32_t)0x00000007) /*!< Remap TIM17 channel 1 on DMA1 channel 1 */
+#define DMA1_CSELR_CH1_TIM17_UP ((uint32_t)0x00000007) /*!< Remap TIM17 up on DMA1 channel 1 */
+#define DMA1_CSELR_CH1_USART1_RX ((uint32_t)0x00000008) /*!< Remap USART1 Rx on DMA1 channel 1 */
+#define DMA1_CSELR_CH1_USART2_RX ((uint32_t)0x00000009) /*!< Remap USART2 Rx on DMA1 channel 1 */
+#define DMA1_CSELR_CH1_USART3_RX ((uint32_t)0x0000000A) /*!< Remap USART3 Rx on DMA1 channel 1 */
+#define DMA1_CSELR_CH1_USART4_RX ((uint32_t)0x0000000B) /*!< Remap USART4 Rx on DMA1 channel 1 */
+#define DMA1_CSELR_CH1_USART5_RX ((uint32_t)0x0000000C) /*!< Remap USART5 Rx on DMA1 channel 1 */
+#define DMA1_CSELR_CH1_USART6_RX ((uint32_t)0x0000000D) /*!< Remap USART6 Rx on DMA1 channel 1 */
+#define DMA1_CSELR_CH2_ADC ((uint32_t)0x00000010) /*!< Remap ADC on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_I2C1_TX ((uint32_t)0x00000020) /*!< Remap I2C1 Tx on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_SPI1_RX ((uint32_t)0x00000030) /*!< Remap SPI1 Rx on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_TIM1_CH1 ((uint32_t)0x00000040) /*!< Remap TIM1 channel 1 on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_TIM17_CH1 ((uint32_t)0x00000070) /*!< Remap TIM17 channel 1 on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_TIM17_UP ((uint32_t)0x00000070) /*!< Remap TIM17 up on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_USART1_TX ((uint32_t)0x00000080) /*!< Remap USART1 Tx on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_USART2_TX ((uint32_t)0x00000090) /*!< Remap USART2 Tx on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_USART3_TX ((uint32_t)0x000000A0) /*!< Remap USART3 Tx on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_USART4_TX ((uint32_t)0x000000B0) /*!< Remap USART4 Tx on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_USART5_TX ((uint32_t)0x000000C0) /*!< Remap USART5 Tx on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_USART6_TX ((uint32_t)0x000000D0) /*!< Remap USART6 Tx on DMA1 channel 2 */
+#define DMA1_CSELR_CH3_TIM6_UP ((uint32_t)0x00000100) /*!< Remap TIM6 up on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_I2C1_RX ((uint32_t)0x00000200) /*!< Remap I2C1 Rx on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_SPI1_TX ((uint32_t)0x00000300) /*!< Remap SPI1 Tx on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_TIM1_CH2 ((uint32_t)0x00000400) /*!< Remap TIM1 channel 2 on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_TIM16_CH1 ((uint32_t)0x00000700) /*!< Remap TIM16 channel 1 on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_TIM16_UP ((uint32_t)0x00000700) /*!< Remap TIM16 up on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_USART1_RX ((uint32_t)0x00000800) /*!< Remap USART1 Rx on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_USART2_RX ((uint32_t)0x00000900) /*!< Remap USART2 Rx on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_USART3_RX ((uint32_t)0x00000A00) /*!< Remap USART3 Rx on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_USART4_RX ((uint32_t)0x00000B00) /*!< Remap USART4 Rx on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_USART5_RX ((uint32_t)0x00000C00) /*!< Remap USART5 Rx on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_USART6_RX ((uint32_t)0x00000D00) /*!< Remap USART6 Rx on DMA1 channel 3 */
+#define DMA1_CSELR_CH4_TIM7_UP ((uint32_t)0x00001000) /*!< Remap TIM7 up on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_I2C2_TX ((uint32_t)0x00002000) /*!< Remap I2C2 Tx on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_SPI2_RX ((uint32_t)0x00003000) /*!< Remap SPI2 Rx on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_TIM2_CH4 ((uint32_t)0x00005000) /*!< Remap TIM2 channel 4 on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_TIM3_CH1 ((uint32_t)0x00006000) /*!< Remap TIM3 channel 1 on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_TIM3_TRIG ((uint32_t)0x00006000) /*!< Remap TIM3 Trig on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_TIM16_CH1 ((uint32_t)0x00007000) /*!< Remap TIM16 channel 1 on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_TIM16_UP ((uint32_t)0x00007000) /*!< Remap TIM16 up on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_USART1_TX ((uint32_t)0x00008000) /*!< Remap USART1 Tx on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_USART2_TX ((uint32_t)0x00009000) /*!< Remap USART2 Tx on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_USART3_TX ((uint32_t)0x0000A000) /*!< Remap USART3 Tx on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_USART4_TX ((uint32_t)0x0000B000) /*!< Remap USART4 Tx on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_USART5_TX ((uint32_t)0x0000C000) /*!< Remap USART5 Tx on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_USART6_TX ((uint32_t)0x0000D000) /*!< Remap USART6 Tx on DMA1 channel 4 */
+#define DMA1_CSELR_CH5_I2C2_RX ((uint32_t)0x00020000) /*!< Remap I2C2 Rx on DMA1 channel 5 */
+#define DMA1_CSELR_CH5_SPI2_TX ((uint32_t)0x00030000) /*!< Remap SPI1 Tx on DMA1 channel 5 */
+#define DMA1_CSELR_CH5_TIM1_CH3 ((uint32_t)0x00040000) /*!< Remap TIM1 channel 3 on DMA1 channel 5 */
+#define DMA1_CSELR_CH5_USART1_RX ((uint32_t)0x00080000) /*!< Remap USART1 Rx on DMA1 channel 5 */
+#define DMA1_CSELR_CH5_USART2_RX ((uint32_t)0x00090000) /*!< Remap USART2 Rx on DMA1 channel 5 */
+#define DMA1_CSELR_CH5_USART3_RX ((uint32_t)0x000A0000) /*!< Remap USART3 Rx on DMA1 channel 5 */
+#define DMA1_CSELR_CH5_USART4_RX ((uint32_t)0x000B0000) /*!< Remap USART4 Rx on DMA1 channel 5 */
+#define DMA1_CSELR_CH5_USART5_RX ((uint32_t)0x000C0000) /*!< Remap USART5 Rx on DMA1 channel 5 */
+#define DMA1_CSELR_CH5_USART6_RX ((uint32_t)0x000D0000) /*!< Remap USART6 Rx on DMA1 channel 5 */
+
+/******************************************************************************/
+/* */
+/* External Interrupt/Event Controller (EXTI) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for EXTI_IMR register *******************/
+#define EXTI_IMR_MR0 ((uint32_t)0x00000001) /*!< Interrupt Mask on line 0 */
+#define EXTI_IMR_MR1 ((uint32_t)0x00000002) /*!< Interrupt Mask on line 1 */
+#define EXTI_IMR_MR2 ((uint32_t)0x00000004) /*!< Interrupt Mask on line 2 */
+#define EXTI_IMR_MR3 ((uint32_t)0x00000008) /*!< Interrupt Mask on line 3 */
+#define EXTI_IMR_MR4 ((uint32_t)0x00000010) /*!< Interrupt Mask on line 4 */
+#define EXTI_IMR_MR5 ((uint32_t)0x00000020) /*!< Interrupt Mask on line 5 */
+#define EXTI_IMR_MR6 ((uint32_t)0x00000040) /*!< Interrupt Mask on line 6 */
+#define EXTI_IMR_MR7 ((uint32_t)0x00000080) /*!< Interrupt Mask on line 7 */
+#define EXTI_IMR_MR8 ((uint32_t)0x00000100) /*!< Interrupt Mask on line 8 */
+#define EXTI_IMR_MR9 ((uint32_t)0x00000200) /*!< Interrupt Mask on line 9 */
+#define EXTI_IMR_MR10 ((uint32_t)0x00000400) /*!< Interrupt Mask on line 10 */
+#define EXTI_IMR_MR11 ((uint32_t)0x00000800) /*!< Interrupt Mask on line 11 */
+#define EXTI_IMR_MR12 ((uint32_t)0x00001000) /*!< Interrupt Mask on line 12 */
+#define EXTI_IMR_MR13 ((uint32_t)0x00002000) /*!< Interrupt Mask on line 13 */
+#define EXTI_IMR_MR14 ((uint32_t)0x00004000) /*!< Interrupt Mask on line 14 */
+#define EXTI_IMR_MR15 ((uint32_t)0x00008000) /*!< Interrupt Mask on line 15 */
+#define EXTI_IMR_MR17 ((uint32_t)0x00020000) /*!< Interrupt Mask on line 17 */
+#define EXTI_IMR_MR19 ((uint32_t)0x00080000) /*!< Interrupt Mask on line 19 */
+#define EXTI_IMR_MR20 ((uint32_t)0x00100000) /*!< Interrupt Mask on line 20 */
+#define EXTI_IMR_MR23 ((uint32_t)0x00800000) /*!< Interrupt Mask on line 23 */
+
+/****************** Bit definition for EXTI_EMR register ********************/
+#define EXTI_EMR_MR0 ((uint32_t)0x00000001) /*!< Event Mask on line 0 */
+#define EXTI_EMR_MR1 ((uint32_t)0x00000002) /*!< Event Mask on line 1 */
+#define EXTI_EMR_MR2 ((uint32_t)0x00000004) /*!< Event Mask on line 2 */
+#define EXTI_EMR_MR3 ((uint32_t)0x00000008) /*!< Event Mask on line 3 */
+#define EXTI_EMR_MR4 ((uint32_t)0x00000010) /*!< Event Mask on line 4 */
+#define EXTI_EMR_MR5 ((uint32_t)0x00000020) /*!< Event Mask on line 5 */
+#define EXTI_EMR_MR6 ((uint32_t)0x00000040) /*!< Event Mask on line 6 */
+#define EXTI_EMR_MR7 ((uint32_t)0x00000080) /*!< Event Mask on line 7 */
+#define EXTI_EMR_MR8 ((uint32_t)0x00000100) /*!< Event Mask on line 8 */
+#define EXTI_EMR_MR9 ((uint32_t)0x00000200) /*!< Event Mask on line 9 */
+#define EXTI_EMR_MR10 ((uint32_t)0x00000400) /*!< Event Mask on line 10 */
+#define EXTI_EMR_MR11 ((uint32_t)0x00000800) /*!< Event Mask on line 11 */
+#define EXTI_EMR_MR12 ((uint32_t)0x00001000) /*!< Event Mask on line 12 */
+#define EXTI_EMR_MR13 ((uint32_t)0x00002000) /*!< Event Mask on line 13 */
+#define EXTI_EMR_MR14 ((uint32_t)0x00004000) /*!< Event Mask on line 14 */
+#define EXTI_EMR_MR15 ((uint32_t)0x00008000) /*!< Event Mask on line 15 */
+#define EXTI_EMR_MR17 ((uint32_t)0x00020000) /*!< Event Mask on line 17 */
+#define EXTI_EMR_MR19 ((uint32_t)0x00080000) /*!< Event Mask on line 19 */
+#define EXTI_EMR_MR20 ((uint32_t)0x00100000) /*!< Event Mask on line 20 */
+#define EXTI_EMR_MR23 ((uint32_t)0x00800000) /*!< Event Mask on line 23 */
+
+/******************* Bit definition for EXTI_RTSR register ******************/
+#define EXTI_RTSR_TR0 ((uint32_t)0x00000001) /*!< Rising trigger event configuration bit of line 0 */
+#define EXTI_RTSR_TR1 ((uint32_t)0x00000002) /*!< Rising trigger event configuration bit of line 1 */
+#define EXTI_RTSR_TR2 ((uint32_t)0x00000004) /*!< Rising trigger event configuration bit of line 2 */
+#define EXTI_RTSR_TR3 ((uint32_t)0x00000008) /*!< Rising trigger event configuration bit of line 3 */
+#define EXTI_RTSR_TR4 ((uint32_t)0x00000010) /*!< Rising trigger event configuration bit of line 4 */
+#define EXTI_RTSR_TR5 ((uint32_t)0x00000020) /*!< Rising trigger event configuration bit of line 5 */
+#define EXTI_RTSR_TR6 ((uint32_t)0x00000040) /*!< Rising trigger event configuration bit of line 6 */
+#define EXTI_RTSR_TR7 ((uint32_t)0x00000080) /*!< Rising trigger event configuration bit of line 7 */
+#define EXTI_RTSR_TR8 ((uint32_t)0x00000100) /*!< Rising trigger event configuration bit of line 8 */
+#define EXTI_RTSR_TR9 ((uint32_t)0x00000200) /*!< Rising trigger event configuration bit of line 9 */
+#define EXTI_RTSR_TR10 ((uint32_t)0x00000400) /*!< Rising trigger event configuration bit of line 10 */
+#define EXTI_RTSR_TR11 ((uint32_t)0x00000800) /*!< Rising trigger event configuration bit of line 11 */
+#define EXTI_RTSR_TR12 ((uint32_t)0x00001000) /*!< Rising trigger event configuration bit of line 12 */
+#define EXTI_RTSR_TR13 ((uint32_t)0x00002000) /*!< Rising trigger event configuration bit of line 13 */
+#define EXTI_RTSR_TR14 ((uint32_t)0x00004000) /*!< Rising trigger event configuration bit of line 14 */
+#define EXTI_RTSR_TR15 ((uint32_t)0x00008000) /*!< Rising trigger event configuration bit of line 15 */
+#define EXTI_RTSR_TR16 ((uint32_t)0x00010000) /*!< Rising trigger event configuration bit of line 16 */
+#define EXTI_RTSR_TR17 ((uint32_t)0x00020000) /*!< Rising trigger event configuration bit of line 17 */
+#define EXTI_RTSR_TR19 ((uint32_t)0x00080000) /*!< Rising trigger event configuration bit of line 19 */
+#define EXTI_RTSR_TR20 ((uint32_t)0x00100000) /*!< Rising trigger event configuration bit of line 20 */
+#define EXTI_RTSR_TR21 ((uint32_t)0x00200000) /*!< Rising trigger event configuration bit of line 21 */
+#define EXTI_RTSR_TR22 ((uint32_t)0x00400000) /*!< Rising trigger event configuration bit of line 22 */
+
+/******************* Bit definition for EXTI_FTSR register *******************/
+#define EXTI_FTSR_TR0 ((uint32_t)0x00000001) /*!< Falling trigger event configuration bit of line 0 */
+#define EXTI_FTSR_TR1 ((uint32_t)0x00000002) /*!< Falling trigger event configuration bit of line 1 */
+#define EXTI_FTSR_TR2 ((uint32_t)0x00000004) /*!< Falling trigger event configuration bit of line 2 */
+#define EXTI_FTSR_TR3 ((uint32_t)0x00000008) /*!< Falling trigger event configuration bit of line 3 */
+#define EXTI_FTSR_TR4 ((uint32_t)0x00000010) /*!< Falling trigger event configuration bit of line 4 */
+#define EXTI_FTSR_TR5 ((uint32_t)0x00000020) /*!< Falling trigger event configuration bit of line 5 */
+#define EXTI_FTSR_TR6 ((uint32_t)0x00000040) /*!< Falling trigger event configuration bit of line 6 */
+#define EXTI_FTSR_TR7 ((uint32_t)0x00000080) /*!< Falling trigger event configuration bit of line 7 */
+#define EXTI_FTSR_TR8 ((uint32_t)0x00000100) /*!< Falling trigger event configuration bit of line 8 */
+#define EXTI_FTSR_TR9 ((uint32_t)0x00000200) /*!< Falling trigger event configuration bit of line 9 */
+#define EXTI_FTSR_TR10 ((uint32_t)0x00000400) /*!< Falling trigger event configuration bit of line 10 */
+#define EXTI_FTSR_TR11 ((uint32_t)0x00000800) /*!< Falling trigger event configuration bit of line 11 */
+#define EXTI_FTSR_TR12 ((uint32_t)0x00001000) /*!< Falling trigger event configuration bit of line 12 */
+#define EXTI_FTSR_TR13 ((uint32_t)0x00002000) /*!< Falling trigger event configuration bit of line 13 */
+#define EXTI_FTSR_TR14 ((uint32_t)0x00004000) /*!< Falling trigger event configuration bit of line 14 */
+#define EXTI_FTSR_TR15 ((uint32_t)0x00008000) /*!< Falling trigger event configuration bit of line 15 */
+#define EXTI_FTSR_TR16 ((uint32_t)0x00010000) /*!< Falling trigger event configuration bit of line 16 */
+#define EXTI_FTSR_TR17 ((uint32_t)0x00020000) /*!< Falling trigger event configuration bit of line 17 */
+#define EXTI_FTSR_TR19 ((uint32_t)0x00080000) /*!< Falling trigger event configuration bit of line 19 */
+#define EXTI_FTSR_TR20 ((uint32_t)0x00100000) /*!< Falling trigger event configuration bit of line 20 */
+#define EXTI_FTSR_TR21 ((uint32_t)0x00200000) /*!< Falling trigger event configuration bit of line 21 */
+#define EXTI_FTSR_TR22 ((uint32_t)0x00400000) /*!< Falling trigger event configuration bit of line 22 */
+
+/******************* Bit definition for EXTI_SWIER register *******************/
+#define EXTI_SWIER_SWIER0 ((uint32_t)0x00000001) /*!< Software Interrupt on line 0 */
+#define EXTI_SWIER_SWIER1 ((uint32_t)0x00000002) /*!< Software Interrupt on line 1 */
+#define EXTI_SWIER_SWIER2 ((uint32_t)0x00000004) /*!< Software Interrupt on line 2 */
+#define EXTI_SWIER_SWIER3 ((uint32_t)0x00000008) /*!< Software Interrupt on line 3 */
+#define EXTI_SWIER_SWIER4 ((uint32_t)0x00000010) /*!< Software Interrupt on line 4 */
+#define EXTI_SWIER_SWIER5 ((uint32_t)0x00000020) /*!< Software Interrupt on line 5 */
+#define EXTI_SWIER_SWIER6 ((uint32_t)0x00000040) /*!< Software Interrupt on line 6 */
+#define EXTI_SWIER_SWIER7 ((uint32_t)0x00000080) /*!< Software Interrupt on line 7 */
+#define EXTI_SWIER_SWIER8 ((uint32_t)0x00000100) /*!< Software Interrupt on line 8 */
+#define EXTI_SWIER_SWIER9 ((uint32_t)0x00000200) /*!< Software Interrupt on line 9 */
+#define EXTI_SWIER_SWIER10 ((uint32_t)0x00000400) /*!< Software Interrupt on line 10 */
+#define EXTI_SWIER_SWIER11 ((uint32_t)0x00000800) /*!< Software Interrupt on line 11 */
+#define EXTI_SWIER_SWIER12 ((uint32_t)0x00001000) /*!< Software Interrupt on line 12 */
+#define EXTI_SWIER_SWIER13 ((uint32_t)0x00002000) /*!< Software Interrupt on line 13 */
+#define EXTI_SWIER_SWIER14 ((uint32_t)0x00004000) /*!< Software Interrupt on line 14 */
+#define EXTI_SWIER_SWIER15 ((uint32_t)0x00008000) /*!< Software Interrupt on line 15 */
+#define EXTI_SWIER_SWIER16 ((uint32_t)0x00010000) /*!< Software Interrupt on line 16 */
+#define EXTI_SWIER_SWIER17 ((uint32_t)0x00020000) /*!< Software Interrupt on line 17 */
+#define EXTI_SWIER_SWIER19 ((uint32_t)0x00080000) /*!< Software Interrupt on line 19 */
+#define EXTI_SWIER_SWIER20 ((uint32_t)0x00100000) /*!< Software Interrupt on line 20 */
+#define EXTI_SWIER_SWIER21 ((uint32_t)0x00200000) /*!< Software Interrupt on line 21 */
+#define EXTI_SWIER_SWIER22 ((uint32_t)0x00400000) /*!< Software Interrupt on line 22 */
+
+/****************** Bit definition for EXTI_PR register *********************/
+#define EXTI_PR_PR0 ((uint32_t)0x00000001) /*!< Pending bit 0 */
+#define EXTI_PR_PR1 ((uint32_t)0x00000002) /*!< Pending bit 1 */
+#define EXTI_PR_PR2 ((uint32_t)0x00000004) /*!< Pending bit 2 */
+#define EXTI_PR_PR3 ((uint32_t)0x00000008) /*!< Pending bit 3 */
+#define EXTI_PR_PR4 ((uint32_t)0x00000010) /*!< Pending bit 4 */
+#define EXTI_PR_PR5 ((uint32_t)0x00000020) /*!< Pending bit 5 */
+#define EXTI_PR_PR6 ((uint32_t)0x00000040) /*!< Pending bit 6 */
+#define EXTI_PR_PR7 ((uint32_t)0x00000080) /*!< Pending bit 7 */
+#define EXTI_PR_PR8 ((uint32_t)0x00000100) /*!< Pending bit 8 */
+#define EXTI_PR_PR9 ((uint32_t)0x00000200) /*!< Pending bit 9 */
+#define EXTI_PR_PR10 ((uint32_t)0x00000400) /*!< Pending bit 10 */
+#define EXTI_PR_PR11 ((uint32_t)0x00000800) /*!< Pending bit 11 */
+#define EXTI_PR_PR12 ((uint32_t)0x00001000) /*!< Pending bit 12 */
+#define EXTI_PR_PR13 ((uint32_t)0x00002000) /*!< Pending bit 13 */
+#define EXTI_PR_PR14 ((uint32_t)0x00004000) /*!< Pending bit 14 */
+#define EXTI_PR_PR15 ((uint32_t)0x00008000) /*!< Pending bit 15 */
+#define EXTI_PR_PR16 ((uint32_t)0x00010000) /*!< Pending bit 16 */
+#define EXTI_PR_PR17 ((uint32_t)0x00020000) /*!< Pending bit 17 */
+#define EXTI_PR_PR19 ((uint32_t)0x00080000) /*!< Pending bit 19 */
+#define EXTI_PR_PR20 ((uint32_t)0x00100000) /*!< Pending bit 20 */
+#define EXTI_PR_PR21 ((uint32_t)0x00200000) /*!< Pending bit 21 */
+#define EXTI_PR_PR22 ((uint32_t)0x00400000) /*!< Pending bit 22 */
+
+/******************************************************************************/
+/* */
+/* FLASH and Option Bytes Registers */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for FLASH_ACR register ******************/
+#define FLASH_ACR_LATENCY ((uint32_t)0x00000001) /*!< LATENCY bit (Latency) */
+
+#define FLASH_ACR_PRFTBE ((uint32_t)0x00000010) /*!< Prefetch Buffer Enable */
+#define FLASH_ACR_PRFTBS ((uint32_t)0x00000020) /*!< Prefetch Buffer Status */
+
+/****************** Bit definition for FLASH_KEYR register ******************/
+#define FLASH_KEYR_FKEYR ((uint32_t)0xFFFFFFFF) /*!< FPEC Key */
+
+/***************** Bit definition for FLASH_OPTKEYR register ****************/
+#define FLASH_OPTKEYR_OPTKEYR ((uint32_t)0xFFFFFFFF) /*!< Option Byte Key */
+
+/****************** FLASH Keys **********************************************/
+#define FLASH_FKEY1 ((uint32_t)0x45670123) /*!< Flash program erase key1 */
+#define FLASH_FKEY2 ((uint32_t)0xCDEF89AB) /*!< Flash program erase key2: used with FLASH_PEKEY1
+ to unlock the write access to the FPEC. */
+
+#define FLASH_OPTKEY1 ((uint32_t)0x45670123) /*!< Flash option key1 */
+#define FLASH_OPTKEY2 ((uint32_t)0xCDEF89AB) /*!< Flash option key2: used with FLASH_OPTKEY1 to
+ unlock the write access to the option byte block */
+
+/****************** Bit definition for FLASH_SR register *******************/
+#define FLASH_SR_BSY ((uint32_t)0x00000001) /*!< Busy */
+#define FLASH_SR_PGERR ((uint32_t)0x00000004) /*!< Programming Error */
+#define FLASH_SR_WRPRTERR ((uint32_t)0x00000010) /*!< Write Protection Error */
+#define FLASH_SR_EOP ((uint32_t)0x00000020) /*!< End of operation */
+#define FLASH_SR_WRPERR FLASH_SR_WRPRTERR /*!< Legacy of Write Protection Error */
+
+/******************* Bit definition for FLASH_CR register *******************/
+#define FLASH_CR_PG ((uint32_t)0x00000001) /*!< Programming */
+#define FLASH_CR_PER ((uint32_t)0x00000002) /*!< Page Erase */
+#define FLASH_CR_MER ((uint32_t)0x00000004) /*!< Mass Erase */
+#define FLASH_CR_OPTPG ((uint32_t)0x00000010) /*!< Option Byte Programming */
+#define FLASH_CR_OPTER ((uint32_t)0x00000020) /*!< Option Byte Erase */
+#define FLASH_CR_STRT ((uint32_t)0x00000040) /*!< Start */
+#define FLASH_CR_LOCK ((uint32_t)0x00000080) /*!< Lock */
+#define FLASH_CR_OPTWRE ((uint32_t)0x00000200) /*!< Option Bytes Write Enable */
+#define FLASH_CR_ERRIE ((uint32_t)0x00000400) /*!< Error Interrupt Enable */
+#define FLASH_CR_EOPIE ((uint32_t)0x00001000) /*!< End of operation interrupt enable */
+#define FLASH_CR_OBL_LAUNCH ((uint32_t)0x00002000) /*!< Option Bytes Loader Launch */
+
+/******************* Bit definition for FLASH_AR register *******************/
+#define FLASH_AR_FAR ((uint32_t)0xFFFFFFFF) /*!< Flash Address */
+
+/****************** Bit definition for FLASH_OBR register *******************/
+#define FLASH_OBR_OPTERR ((uint32_t)0x00000001) /*!< Option Byte Error */
+#define FLASH_OBR_RDPRT1 ((uint32_t)0x00000002) /*!< Read protection Level 1 */
+#define FLASH_OBR_RDPRT2 ((uint32_t)0x00000004) /*!< Read protection Level 2 */
+
+#define FLASH_OBR_USER ((uint32_t)0x00003700) /*!< User Option Bytes */
+#define FLASH_OBR_IWDG_SW ((uint32_t)0x00000100) /*!< IWDG SW */
+#define FLASH_OBR_nRST_STOP ((uint32_t)0x00000200) /*!< nRST_STOP */
+#define FLASH_OBR_nRST_STDBY ((uint32_t)0x00000400) /*!< nRST_STDBY */
+#define FLASH_OBR_nBOOT1 ((uint32_t)0x00001000) /*!< nBOOT1 */
+#define FLASH_OBR_VDDA_MONITOR ((uint32_t)0x00002000) /*!< VDDA power supply supervisor */
+
+/* Old BOOT1 bit definition, maintained for legacy purpose */
+#define FLASH_OBR_BOOT1 FLASH_OBR_nBOOT1
+
+/* Old OBR_VDDA bit definition, maintained for legacy purpose */
+#define FLASH_OBR_VDDA_ANALOG FLASH_OBR_VDDA_MONITOR
+
+/****************** Bit definition for FLASH_WRPR register ******************/
+#define FLASH_WRPR_WRP ((uint32_t)0x0000FFFF) /*!< Write Protect */
+
+/*----------------------------------------------------------------------------*/
+
+/****************** Bit definition for OB_RDP register **********************/
+#define OB_RDP_RDP ((uint32_t)0x000000FF) /*!< Read protection option byte */
+#define OB_RDP_nRDP ((uint32_t)0x0000FF00) /*!< Read protection complemented option byte */
+
+/****************** Bit definition for OB_USER register *********************/
+#define OB_USER_USER ((uint32_t)0x00FF0000) /*!< User option byte */
+#define OB_USER_nUSER ((uint32_t)0xFF000000) /*!< User complemented option byte */
+
+/****************** Bit definition for OB_WRP0 register *********************/
+#define OB_WRP0_WRP0 ((uint32_t)0x000000FF) /*!< Flash memory write protection option bytes */
+#define OB_WRP0_nWRP0 ((uint32_t)0x0000FF00) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for OB_WRP1 register *********************/
+#define OB_WRP1_WRP1 ((uint32_t)0x00FF0000) /*!< Flash memory write protection option bytes */
+#define OB_WRP1_nWRP1 ((uint32_t)0xFF000000) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for OB_WRP2 register *********************/
+#define OB_WRP2_WRP2 ((uint32_t)0x000000FF) /*!< Flash memory write protection option bytes */
+#define OB_WRP2_nWRP2 ((uint32_t)0x0000FF00) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for OB_WRP3 register *********************/
+#define OB_WRP3_WRP3 ((uint32_t)0x00FF0000) /*!< Flash memory write protection option bytes */
+#define OB_WRP3_nWRP3 ((uint32_t)0xFF000000) /*!< Flash memory write protection complemented option bytes */
+
+/******************************************************************************/
+/* */
+/* General Purpose IOs (GPIO) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for GPIO_MODER register *****************/
+#define GPIO_MODER_MODER0 ((uint32_t)0x00000003)
+#define GPIO_MODER_MODER0_0 ((uint32_t)0x00000001)
+#define GPIO_MODER_MODER0_1 ((uint32_t)0x00000002)
+#define GPIO_MODER_MODER1 ((uint32_t)0x0000000C)
+#define GPIO_MODER_MODER1_0 ((uint32_t)0x00000004)
+#define GPIO_MODER_MODER1_1 ((uint32_t)0x00000008)
+#define GPIO_MODER_MODER2 ((uint32_t)0x00000030)
+#define GPIO_MODER_MODER2_0 ((uint32_t)0x00000010)
+#define GPIO_MODER_MODER2_1 ((uint32_t)0x00000020)
+#define GPIO_MODER_MODER3 ((uint32_t)0x000000C0)
+#define GPIO_MODER_MODER3_0 ((uint32_t)0x00000040)
+#define GPIO_MODER_MODER3_1 ((uint32_t)0x00000080)
+#define GPIO_MODER_MODER4 ((uint32_t)0x00000300)
+#define GPIO_MODER_MODER4_0 ((uint32_t)0x00000100)
+#define GPIO_MODER_MODER4_1 ((uint32_t)0x00000200)
+#define GPIO_MODER_MODER5 ((uint32_t)0x00000C00)
+#define GPIO_MODER_MODER5_0 ((uint32_t)0x00000400)
+#define GPIO_MODER_MODER5_1 ((uint32_t)0x00000800)
+#define GPIO_MODER_MODER6 ((uint32_t)0x00003000)
+#define GPIO_MODER_MODER6_0 ((uint32_t)0x00001000)
+#define GPIO_MODER_MODER6_1 ((uint32_t)0x00002000)
+#define GPIO_MODER_MODER7 ((uint32_t)0x0000C000)
+#define GPIO_MODER_MODER7_0 ((uint32_t)0x00004000)
+#define GPIO_MODER_MODER7_1 ((uint32_t)0x00008000)
+#define GPIO_MODER_MODER8 ((uint32_t)0x00030000)
+#define GPIO_MODER_MODER8_0 ((uint32_t)0x00010000)
+#define GPIO_MODER_MODER8_1 ((uint32_t)0x00020000)
+#define GPIO_MODER_MODER9 ((uint32_t)0x000C0000)
+#define GPIO_MODER_MODER9_0 ((uint32_t)0x00040000)
+#define GPIO_MODER_MODER9_1 ((uint32_t)0x00080000)
+#define GPIO_MODER_MODER10 ((uint32_t)0x00300000)
+#define GPIO_MODER_MODER10_0 ((uint32_t)0x00100000)
+#define GPIO_MODER_MODER10_1 ((uint32_t)0x00200000)
+#define GPIO_MODER_MODER11 ((uint32_t)0x00C00000)
+#define GPIO_MODER_MODER11_0 ((uint32_t)0x00400000)
+#define GPIO_MODER_MODER11_1 ((uint32_t)0x00800000)
+#define GPIO_MODER_MODER12 ((uint32_t)0x03000000)
+#define GPIO_MODER_MODER12_0 ((uint32_t)0x01000000)
+#define GPIO_MODER_MODER12_1 ((uint32_t)0x02000000)
+#define GPIO_MODER_MODER13 ((uint32_t)0x0C000000)
+#define GPIO_MODER_MODER13_0 ((uint32_t)0x04000000)
+#define GPIO_MODER_MODER13_1 ((uint32_t)0x08000000)
+#define GPIO_MODER_MODER14 ((uint32_t)0x30000000)
+#define GPIO_MODER_MODER14_0 ((uint32_t)0x10000000)
+#define GPIO_MODER_MODER14_1 ((uint32_t)0x20000000)
+#define GPIO_MODER_MODER15 ((uint32_t)0xC0000000)
+#define GPIO_MODER_MODER15_0 ((uint32_t)0x40000000)
+#define GPIO_MODER_MODER15_1 ((uint32_t)0x80000000)
+
+/****************** Bit definition for GPIO_OTYPER register *****************/
+#define GPIO_OTYPER_OT_0 ((uint32_t)0x00000001)
+#define GPIO_OTYPER_OT_1 ((uint32_t)0x00000002)
+#define GPIO_OTYPER_OT_2 ((uint32_t)0x00000004)
+#define GPIO_OTYPER_OT_3 ((uint32_t)0x00000008)
+#define GPIO_OTYPER_OT_4 ((uint32_t)0x00000010)
+#define GPIO_OTYPER_OT_5 ((uint32_t)0x00000020)
+#define GPIO_OTYPER_OT_6 ((uint32_t)0x00000040)
+#define GPIO_OTYPER_OT_7 ((uint32_t)0x00000080)
+#define GPIO_OTYPER_OT_8 ((uint32_t)0x00000100)
+#define GPIO_OTYPER_OT_9 ((uint32_t)0x00000200)
+#define GPIO_OTYPER_OT_10 ((uint32_t)0x00000400)
+#define GPIO_OTYPER_OT_11 ((uint32_t)0x00000800)
+#define GPIO_OTYPER_OT_12 ((uint32_t)0x00001000)
+#define GPIO_OTYPER_OT_13 ((uint32_t)0x00002000)
+#define GPIO_OTYPER_OT_14 ((uint32_t)0x00004000)
+#define GPIO_OTYPER_OT_15 ((uint32_t)0x00008000)
+
+/**************** Bit definition for GPIO_OSPEEDR register ******************/
+#define GPIO_OSPEEDR_OSPEEDR0 ((uint32_t)0x00000003)
+#define GPIO_OSPEEDR_OSPEEDR0_0 ((uint32_t)0x00000001)
+#define GPIO_OSPEEDR_OSPEEDR0_1 ((uint32_t)0x00000002)
+#define GPIO_OSPEEDR_OSPEEDR1 ((uint32_t)0x0000000C)
+#define GPIO_OSPEEDR_OSPEEDR1_0 ((uint32_t)0x00000004)
+#define GPIO_OSPEEDR_OSPEEDR1_1 ((uint32_t)0x00000008)
+#define GPIO_OSPEEDR_OSPEEDR2 ((uint32_t)0x00000030)
+#define GPIO_OSPEEDR_OSPEEDR2_0 ((uint32_t)0x00000010)
+#define GPIO_OSPEEDR_OSPEEDR2_1 ((uint32_t)0x00000020)
+#define GPIO_OSPEEDR_OSPEEDR3 ((uint32_t)0x000000C0)
+#define GPIO_OSPEEDR_OSPEEDR3_0 ((uint32_t)0x00000040)
+#define GPIO_OSPEEDR_OSPEEDR3_1 ((uint32_t)0x00000080)
+#define GPIO_OSPEEDR_OSPEEDR4 ((uint32_t)0x00000300)
+#define GPIO_OSPEEDR_OSPEEDR4_0 ((uint32_t)0x00000100)
+#define GPIO_OSPEEDR_OSPEEDR4_1 ((uint32_t)0x00000200)
+#define GPIO_OSPEEDR_OSPEEDR5 ((uint32_t)0x00000C00)
+#define GPIO_OSPEEDR_OSPEEDR5_0 ((uint32_t)0x00000400)
+#define GPIO_OSPEEDR_OSPEEDR5_1 ((uint32_t)0x00000800)
+#define GPIO_OSPEEDR_OSPEEDR6 ((uint32_t)0x00003000)
+#define GPIO_OSPEEDR_OSPEEDR6_0 ((uint32_t)0x00001000)
+#define GPIO_OSPEEDR_OSPEEDR6_1 ((uint32_t)0x00002000)
+#define GPIO_OSPEEDR_OSPEEDR7 ((uint32_t)0x0000C000)
+#define GPIO_OSPEEDR_OSPEEDR7_0 ((uint32_t)0x00004000)
+#define GPIO_OSPEEDR_OSPEEDR7_1 ((uint32_t)0x00008000)
+#define GPIO_OSPEEDR_OSPEEDR8 ((uint32_t)0x00030000)
+#define GPIO_OSPEEDR_OSPEEDR8_0 ((uint32_t)0x00010000)
+#define GPIO_OSPEEDR_OSPEEDR8_1 ((uint32_t)0x00020000)
+#define GPIO_OSPEEDR_OSPEEDR9 ((uint32_t)0x000C0000)
+#define GPIO_OSPEEDR_OSPEEDR9_0 ((uint32_t)0x00040000)
+#define GPIO_OSPEEDR_OSPEEDR9_1 ((uint32_t)0x00080000)
+#define GPIO_OSPEEDR_OSPEEDR10 ((uint32_t)0x00300000)
+#define GPIO_OSPEEDR_OSPEEDR10_0 ((uint32_t)0x00100000)
+#define GPIO_OSPEEDR_OSPEEDR10_1 ((uint32_t)0x00200000)
+#define GPIO_OSPEEDR_OSPEEDR11 ((uint32_t)0x00C00000)
+#define GPIO_OSPEEDR_OSPEEDR11_0 ((uint32_t)0x00400000)
+#define GPIO_OSPEEDR_OSPEEDR11_1 ((uint32_t)0x00800000)
+#define GPIO_OSPEEDR_OSPEEDR12 ((uint32_t)0x03000000)
+#define GPIO_OSPEEDR_OSPEEDR12_0 ((uint32_t)0x01000000)
+#define GPIO_OSPEEDR_OSPEEDR12_1 ((uint32_t)0x02000000)
+#define GPIO_OSPEEDR_OSPEEDR13 ((uint32_t)0x0C000000)
+#define GPIO_OSPEEDR_OSPEEDR13_0 ((uint32_t)0x04000000)
+#define GPIO_OSPEEDR_OSPEEDR13_1 ((uint32_t)0x08000000)
+#define GPIO_OSPEEDR_OSPEEDR14 ((uint32_t)0x30000000)
+#define GPIO_OSPEEDR_OSPEEDR14_0 ((uint32_t)0x10000000)
+#define GPIO_OSPEEDR_OSPEEDR14_1 ((uint32_t)0x20000000)
+#define GPIO_OSPEEDR_OSPEEDR15 ((uint32_t)0xC0000000)
+#define GPIO_OSPEEDR_OSPEEDR15_0 ((uint32_t)0x40000000)
+#define GPIO_OSPEEDR_OSPEEDR15_1 ((uint32_t)0x80000000)
+
+/* Old Bit definition for GPIO_OSPEEDR register maintained for legacy purpose */
+#define GPIO_OSPEEDER_OSPEEDR0 GPIO_OSPEEDR_OSPEEDR0
+#define GPIO_OSPEEDER_OSPEEDR0_0 GPIO_OSPEEDR_OSPEEDR0_0
+#define GPIO_OSPEEDER_OSPEEDR0_1 GPIO_OSPEEDR_OSPEEDR0_1
+#define GPIO_OSPEEDER_OSPEEDR1 GPIO_OSPEEDR_OSPEEDR1
+#define GPIO_OSPEEDER_OSPEEDR1_0 GPIO_OSPEEDR_OSPEEDR1_0
+#define GPIO_OSPEEDER_OSPEEDR1_1 GPIO_OSPEEDR_OSPEEDR1_1
+#define GPIO_OSPEEDER_OSPEEDR2 GPIO_OSPEEDR_OSPEEDR2
+#define GPIO_OSPEEDER_OSPEEDR2_0 GPIO_OSPEEDR_OSPEEDR2_0
+#define GPIO_OSPEEDER_OSPEEDR2_1 GPIO_OSPEEDR_OSPEEDR2_1
+#define GPIO_OSPEEDER_OSPEEDR3 GPIO_OSPEEDR_OSPEEDR3
+#define GPIO_OSPEEDER_OSPEEDR3_0 GPIO_OSPEEDR_OSPEEDR3_0
+#define GPIO_OSPEEDER_OSPEEDR3_1 GPIO_OSPEEDR_OSPEEDR3_1
+#define GPIO_OSPEEDER_OSPEEDR4 GPIO_OSPEEDR_OSPEEDR4
+#define GPIO_OSPEEDER_OSPEEDR4_0 GPIO_OSPEEDR_OSPEEDR4_0
+#define GPIO_OSPEEDER_OSPEEDR4_1 GPIO_OSPEEDR_OSPEEDR4_1
+#define GPIO_OSPEEDER_OSPEEDR5 GPIO_OSPEEDR_OSPEEDR5
+#define GPIO_OSPEEDER_OSPEEDR5_0 GPIO_OSPEEDR_OSPEEDR5_0
+#define GPIO_OSPEEDER_OSPEEDR5_1 GPIO_OSPEEDR_OSPEEDR5_1
+#define GPIO_OSPEEDER_OSPEEDR6 GPIO_OSPEEDR_OSPEEDR6
+#define GPIO_OSPEEDER_OSPEEDR6_0 GPIO_OSPEEDR_OSPEEDR6_0
+#define GPIO_OSPEEDER_OSPEEDR6_1 GPIO_OSPEEDR_OSPEEDR6_1
+#define GPIO_OSPEEDER_OSPEEDR7 GPIO_OSPEEDR_OSPEEDR7
+#define GPIO_OSPEEDER_OSPEEDR7_0 GPIO_OSPEEDR_OSPEEDR7_0
+#define GPIO_OSPEEDER_OSPEEDR7_1 GPIO_OSPEEDR_OSPEEDR7_1
+#define GPIO_OSPEEDER_OSPEEDR8 GPIO_OSPEEDR_OSPEEDR8
+#define GPIO_OSPEEDER_OSPEEDR8_0 GPIO_OSPEEDR_OSPEEDR8_0
+#define GPIO_OSPEEDER_OSPEEDR8_1 GPIO_OSPEEDR_OSPEEDR8_1
+#define GPIO_OSPEEDER_OSPEEDR9 GPIO_OSPEEDR_OSPEEDR9
+#define GPIO_OSPEEDER_OSPEEDR9_0 GPIO_OSPEEDR_OSPEEDR9_0
+#define GPIO_OSPEEDER_OSPEEDR9_1 GPIO_OSPEEDR_OSPEEDR9_1
+#define GPIO_OSPEEDER_OSPEEDR10 GPIO_OSPEEDR_OSPEEDR10
+#define GPIO_OSPEEDER_OSPEEDR10_0 GPIO_OSPEEDR_OSPEEDR10_0
+#define GPIO_OSPEEDER_OSPEEDR10_1 GPIO_OSPEEDR_OSPEEDR10_1
+#define GPIO_OSPEEDER_OSPEEDR11 GPIO_OSPEEDR_OSPEEDR11
+#define GPIO_OSPEEDER_OSPEEDR11_0 GPIO_OSPEEDR_OSPEEDR11_0
+#define GPIO_OSPEEDER_OSPEEDR11_1 GPIO_OSPEEDR_OSPEEDR11_1
+#define GPIO_OSPEEDER_OSPEEDR12 GPIO_OSPEEDR_OSPEEDR12
+#define GPIO_OSPEEDER_OSPEEDR12_0 GPIO_OSPEEDR_OSPEEDR12_0
+#define GPIO_OSPEEDER_OSPEEDR12_1 GPIO_OSPEEDR_OSPEEDR12_1
+#define GPIO_OSPEEDER_OSPEEDR13 GPIO_OSPEEDR_OSPEEDR13
+#define GPIO_OSPEEDER_OSPEEDR13_0 GPIO_OSPEEDR_OSPEEDR13_0
+#define GPIO_OSPEEDER_OSPEEDR13_1 GPIO_OSPEEDR_OSPEEDR13_1
+#define GPIO_OSPEEDER_OSPEEDR14 GPIO_OSPEEDR_OSPEEDR14
+#define GPIO_OSPEEDER_OSPEEDR14_0 GPIO_OSPEEDR_OSPEEDR14_0
+#define GPIO_OSPEEDER_OSPEEDR14_1 GPIO_OSPEEDR_OSPEEDR14_1
+#define GPIO_OSPEEDER_OSPEEDR15 GPIO_OSPEEDR_OSPEEDR15
+#define GPIO_OSPEEDER_OSPEEDR15_0 GPIO_OSPEEDR_OSPEEDR15_0
+#define GPIO_OSPEEDER_OSPEEDR15_1 GPIO_OSPEEDR_OSPEEDR15_1
+
+/******************* Bit definition for GPIO_PUPDR register ******************/
+#define GPIO_PUPDR_PUPDR0 ((uint32_t)0x00000003)
+#define GPIO_PUPDR_PUPDR0_0 ((uint32_t)0x00000001)
+#define GPIO_PUPDR_PUPDR0_1 ((uint32_t)0x00000002)
+#define GPIO_PUPDR_PUPDR1 ((uint32_t)0x0000000C)
+#define GPIO_PUPDR_PUPDR1_0 ((uint32_t)0x00000004)
+#define GPIO_PUPDR_PUPDR1_1 ((uint32_t)0x00000008)
+#define GPIO_PUPDR_PUPDR2 ((uint32_t)0x00000030)
+#define GPIO_PUPDR_PUPDR2_0 ((uint32_t)0x00000010)
+#define GPIO_PUPDR_PUPDR2_1 ((uint32_t)0x00000020)
+#define GPIO_PUPDR_PUPDR3 ((uint32_t)0x000000C0)
+#define GPIO_PUPDR_PUPDR3_0 ((uint32_t)0x00000040)
+#define GPIO_PUPDR_PUPDR3_1 ((uint32_t)0x00000080)
+#define GPIO_PUPDR_PUPDR4 ((uint32_t)0x00000300)
+#define GPIO_PUPDR_PUPDR4_0 ((uint32_t)0x00000100)
+#define GPIO_PUPDR_PUPDR4_1 ((uint32_t)0x00000200)
+#define GPIO_PUPDR_PUPDR5 ((uint32_t)0x00000C00)
+#define GPIO_PUPDR_PUPDR5_0 ((uint32_t)0x00000400)
+#define GPIO_PUPDR_PUPDR5_1 ((uint32_t)0x00000800)
+#define GPIO_PUPDR_PUPDR6 ((uint32_t)0x00003000)
+#define GPIO_PUPDR_PUPDR6_0 ((uint32_t)0x00001000)
+#define GPIO_PUPDR_PUPDR6_1 ((uint32_t)0x00002000)
+#define GPIO_PUPDR_PUPDR7 ((uint32_t)0x0000C000)
+#define GPIO_PUPDR_PUPDR7_0 ((uint32_t)0x00004000)
+#define GPIO_PUPDR_PUPDR7_1 ((uint32_t)0x00008000)
+#define GPIO_PUPDR_PUPDR8 ((uint32_t)0x00030000)
+#define GPIO_PUPDR_PUPDR8_0 ((uint32_t)0x00010000)
+#define GPIO_PUPDR_PUPDR8_1 ((uint32_t)0x00020000)
+#define GPIO_PUPDR_PUPDR9 ((uint32_t)0x000C0000)
+#define GPIO_PUPDR_PUPDR9_0 ((uint32_t)0x00040000)
+#define GPIO_PUPDR_PUPDR9_1 ((uint32_t)0x00080000)
+#define GPIO_PUPDR_PUPDR10 ((uint32_t)0x00300000)
+#define GPIO_PUPDR_PUPDR10_0 ((uint32_t)0x00100000)
+#define GPIO_PUPDR_PUPDR10_1 ((uint32_t)0x00200000)
+#define GPIO_PUPDR_PUPDR11 ((uint32_t)0x00C00000)
+#define GPIO_PUPDR_PUPDR11_0 ((uint32_t)0x00400000)
+#define GPIO_PUPDR_PUPDR11_1 ((uint32_t)0x00800000)
+#define GPIO_PUPDR_PUPDR12 ((uint32_t)0x03000000)
+#define GPIO_PUPDR_PUPDR12_0 ((uint32_t)0x01000000)
+#define GPIO_PUPDR_PUPDR12_1 ((uint32_t)0x02000000)
+#define GPIO_PUPDR_PUPDR13 ((uint32_t)0x0C000000)
+#define GPIO_PUPDR_PUPDR13_0 ((uint32_t)0x04000000)
+#define GPIO_PUPDR_PUPDR13_1 ((uint32_t)0x08000000)
+#define GPIO_PUPDR_PUPDR14 ((uint32_t)0x30000000)
+#define GPIO_PUPDR_PUPDR14_0 ((uint32_t)0x10000000)
+#define GPIO_PUPDR_PUPDR14_1 ((uint32_t)0x20000000)
+#define GPIO_PUPDR_PUPDR15 ((uint32_t)0xC0000000)
+#define GPIO_PUPDR_PUPDR15_0 ((uint32_t)0x40000000)
+#define GPIO_PUPDR_PUPDR15_1 ((uint32_t)0x80000000)
+
+/******************* Bit definition for GPIO_IDR register *******************/
+#define GPIO_IDR_0 ((uint32_t)0x00000001)
+#define GPIO_IDR_1 ((uint32_t)0x00000002)
+#define GPIO_IDR_2 ((uint32_t)0x00000004)
+#define GPIO_IDR_3 ((uint32_t)0x00000008)
+#define GPIO_IDR_4 ((uint32_t)0x00000010)
+#define GPIO_IDR_5 ((uint32_t)0x00000020)
+#define GPIO_IDR_6 ((uint32_t)0x00000040)
+#define GPIO_IDR_7 ((uint32_t)0x00000080)
+#define GPIO_IDR_8 ((uint32_t)0x00000100)
+#define GPIO_IDR_9 ((uint32_t)0x00000200)
+#define GPIO_IDR_10 ((uint32_t)0x00000400)
+#define GPIO_IDR_11 ((uint32_t)0x00000800)
+#define GPIO_IDR_12 ((uint32_t)0x00001000)
+#define GPIO_IDR_13 ((uint32_t)0x00002000)
+#define GPIO_IDR_14 ((uint32_t)0x00004000)
+#define GPIO_IDR_15 ((uint32_t)0x00008000)
+
+/****************** Bit definition for GPIO_ODR register ********************/
+#define GPIO_ODR_0 ((uint32_t)0x00000001)
+#define GPIO_ODR_1 ((uint32_t)0x00000002)
+#define GPIO_ODR_2 ((uint32_t)0x00000004)
+#define GPIO_ODR_3 ((uint32_t)0x00000008)
+#define GPIO_ODR_4 ((uint32_t)0x00000010)
+#define GPIO_ODR_5 ((uint32_t)0x00000020)
+#define GPIO_ODR_6 ((uint32_t)0x00000040)
+#define GPIO_ODR_7 ((uint32_t)0x00000080)
+#define GPIO_ODR_8 ((uint32_t)0x00000100)
+#define GPIO_ODR_9 ((uint32_t)0x00000200)
+#define GPIO_ODR_10 ((uint32_t)0x00000400)
+#define GPIO_ODR_11 ((uint32_t)0x00000800)
+#define GPIO_ODR_12 ((uint32_t)0x00001000)
+#define GPIO_ODR_13 ((uint32_t)0x00002000)
+#define GPIO_ODR_14 ((uint32_t)0x00004000)
+#define GPIO_ODR_15 ((uint32_t)0x00008000)
+
+/****************** Bit definition for GPIO_BSRR register ********************/
+#define GPIO_BSRR_BS_0 ((uint32_t)0x00000001)
+#define GPIO_BSRR_BS_1 ((uint32_t)0x00000002)
+#define GPIO_BSRR_BS_2 ((uint32_t)0x00000004)
+#define GPIO_BSRR_BS_3 ((uint32_t)0x00000008)
+#define GPIO_BSRR_BS_4 ((uint32_t)0x00000010)
+#define GPIO_BSRR_BS_5 ((uint32_t)0x00000020)
+#define GPIO_BSRR_BS_6 ((uint32_t)0x00000040)
+#define GPIO_BSRR_BS_7 ((uint32_t)0x00000080)
+#define GPIO_BSRR_BS_8 ((uint32_t)0x00000100)
+#define GPIO_BSRR_BS_9 ((uint32_t)0x00000200)
+#define GPIO_BSRR_BS_10 ((uint32_t)0x00000400)
+#define GPIO_BSRR_BS_11 ((uint32_t)0x00000800)
+#define GPIO_BSRR_BS_12 ((uint32_t)0x00001000)
+#define GPIO_BSRR_BS_13 ((uint32_t)0x00002000)
+#define GPIO_BSRR_BS_14 ((uint32_t)0x00004000)
+#define GPIO_BSRR_BS_15 ((uint32_t)0x00008000)
+#define GPIO_BSRR_BR_0 ((uint32_t)0x00010000)
+#define GPIO_BSRR_BR_1 ((uint32_t)0x00020000)
+#define GPIO_BSRR_BR_2 ((uint32_t)0x00040000)
+#define GPIO_BSRR_BR_3 ((uint32_t)0x00080000)
+#define GPIO_BSRR_BR_4 ((uint32_t)0x00100000)
+#define GPIO_BSRR_BR_5 ((uint32_t)0x00200000)
+#define GPIO_BSRR_BR_6 ((uint32_t)0x00400000)
+#define GPIO_BSRR_BR_7 ((uint32_t)0x00800000)
+#define GPIO_BSRR_BR_8 ((uint32_t)0x01000000)
+#define GPIO_BSRR_BR_9 ((uint32_t)0x02000000)
+#define GPIO_BSRR_BR_10 ((uint32_t)0x04000000)
+#define GPIO_BSRR_BR_11 ((uint32_t)0x08000000)
+#define GPIO_BSRR_BR_12 ((uint32_t)0x10000000)
+#define GPIO_BSRR_BR_13 ((uint32_t)0x20000000)
+#define GPIO_BSRR_BR_14 ((uint32_t)0x40000000)
+#define GPIO_BSRR_BR_15 ((uint32_t)0x80000000)
+
+/****************** Bit definition for GPIO_LCKR register ********************/
+#define GPIO_LCKR_LCK0 ((uint32_t)0x00000001)
+#define GPIO_LCKR_LCK1 ((uint32_t)0x00000002)
+#define GPIO_LCKR_LCK2 ((uint32_t)0x00000004)
+#define GPIO_LCKR_LCK3 ((uint32_t)0x00000008)
+#define GPIO_LCKR_LCK4 ((uint32_t)0x00000010)
+#define GPIO_LCKR_LCK5 ((uint32_t)0x00000020)
+#define GPIO_LCKR_LCK6 ((uint32_t)0x00000040)
+#define GPIO_LCKR_LCK7 ((uint32_t)0x00000080)
+#define GPIO_LCKR_LCK8 ((uint32_t)0x00000100)
+#define GPIO_LCKR_LCK9 ((uint32_t)0x00000200)
+#define GPIO_LCKR_LCK10 ((uint32_t)0x00000400)
+#define GPIO_LCKR_LCK11 ((uint32_t)0x00000800)
+#define GPIO_LCKR_LCK12 ((uint32_t)0x00001000)
+#define GPIO_LCKR_LCK13 ((uint32_t)0x00002000)
+#define GPIO_LCKR_LCK14 ((uint32_t)0x00004000)
+#define GPIO_LCKR_LCK15 ((uint32_t)0x00008000)
+#define GPIO_LCKR_LCKK ((uint32_t)0x00010000)
+
+/****************** Bit definition for GPIO_AFRL register ********************/
+#define GPIO_AFRL_AFRL0 ((uint32_t)0x0000000F)
+#define GPIO_AFRL_AFRL1 ((uint32_t)0x000000F0)
+#define GPIO_AFRL_AFRL2 ((uint32_t)0x00000F00)
+#define GPIO_AFRL_AFRL3 ((uint32_t)0x0000F000)
+#define GPIO_AFRL_AFRL4 ((uint32_t)0x000F0000)
+#define GPIO_AFRL_AFRL5 ((uint32_t)0x00F00000)
+#define GPIO_AFRL_AFRL6 ((uint32_t)0x0F000000)
+#define GPIO_AFRL_AFRL7 ((uint32_t)0xF0000000)
+
+/****************** Bit definition for GPIO_AFRH register ********************/
+#define GPIO_AFRH_AFRH0 ((uint32_t)0x0000000F)
+#define GPIO_AFRH_AFRH1 ((uint32_t)0x000000F0)
+#define GPIO_AFRH_AFRH2 ((uint32_t)0x00000F00)
+#define GPIO_AFRH_AFRH3 ((uint32_t)0x0000F000)
+#define GPIO_AFRH_AFRH4 ((uint32_t)0x000F0000)
+#define GPIO_AFRH_AFRH5 ((uint32_t)0x00F00000)
+#define GPIO_AFRH_AFRH6 ((uint32_t)0x0F000000)
+#define GPIO_AFRH_AFRH7 ((uint32_t)0xF0000000)
+
+/****************** Bit definition for GPIO_BRR register *********************/
+#define GPIO_BRR_BR_0 ((uint32_t)0x00000001)
+#define GPIO_BRR_BR_1 ((uint32_t)0x00000002)
+#define GPIO_BRR_BR_2 ((uint32_t)0x00000004)
+#define GPIO_BRR_BR_3 ((uint32_t)0x00000008)
+#define GPIO_BRR_BR_4 ((uint32_t)0x00000010)
+#define GPIO_BRR_BR_5 ((uint32_t)0x00000020)
+#define GPIO_BRR_BR_6 ((uint32_t)0x00000040)
+#define GPIO_BRR_BR_7 ((uint32_t)0x00000080)
+#define GPIO_BRR_BR_8 ((uint32_t)0x00000100)
+#define GPIO_BRR_BR_9 ((uint32_t)0x00000200)
+#define GPIO_BRR_BR_10 ((uint32_t)0x00000400)
+#define GPIO_BRR_BR_11 ((uint32_t)0x00000800)
+#define GPIO_BRR_BR_12 ((uint32_t)0x00001000)
+#define GPIO_BRR_BR_13 ((uint32_t)0x00002000)
+#define GPIO_BRR_BR_14 ((uint32_t)0x00004000)
+#define GPIO_BRR_BR_15 ((uint32_t)0x00008000)
+
+/******************************************************************************/
+/* */
+/* Inter-integrated Circuit Interface (I2C) */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for I2C_CR1 register *******************/
+#define I2C_CR1_PE ((uint32_t)0x00000001) /*!< Peripheral enable */
+#define I2C_CR1_TXIE ((uint32_t)0x00000002) /*!< TX interrupt enable */
+#define I2C_CR1_RXIE ((uint32_t)0x00000004) /*!< RX interrupt enable */
+#define I2C_CR1_ADDRIE ((uint32_t)0x00000008) /*!< Address match interrupt enable */
+#define I2C_CR1_NACKIE ((uint32_t)0x00000010) /*!< NACK received interrupt enable */
+#define I2C_CR1_STOPIE ((uint32_t)0x00000020) /*!< STOP detection interrupt enable */
+#define I2C_CR1_TCIE ((uint32_t)0x00000040) /*!< Transfer complete interrupt enable */
+#define I2C_CR1_ERRIE ((uint32_t)0x00000080) /*!< Errors interrupt enable */
+#define I2C_CR1_DFN ((uint32_t)0x00000F00) /*!< Digital noise filter */
+#define I2C_CR1_ANFOFF ((uint32_t)0x00001000) /*!< Analog noise filter OFF */
+#define I2C_CR1_SWRST ((uint32_t)0x00002000) /*!< Software reset */
+#define I2C_CR1_TXDMAEN ((uint32_t)0x00004000) /*!< DMA transmission requests enable */
+#define I2C_CR1_RXDMAEN ((uint32_t)0x00008000) /*!< DMA reception requests enable */
+#define I2C_CR1_SBC ((uint32_t)0x00010000) /*!< Slave byte control */
+#define I2C_CR1_NOSTRETCH ((uint32_t)0x00020000) /*!< Clock stretching disable */
+#define I2C_CR1_WUPEN ((uint32_t)0x00040000) /*!< Wakeup from STOP enable */
+#define I2C_CR1_GCEN ((uint32_t)0x00080000) /*!< General call enable */
+#define I2C_CR1_SMBHEN ((uint32_t)0x00100000) /*!< SMBus host address enable */
+#define I2C_CR1_SMBDEN ((uint32_t)0x00200000) /*!< SMBus device default address enable */
+#define I2C_CR1_ALERTEN ((uint32_t)0x00400000) /*!< SMBus alert enable */
+#define I2C_CR1_PECEN ((uint32_t)0x00800000) /*!< PEC enable */
+
+/****************** Bit definition for I2C_CR2 register ********************/
+#define I2C_CR2_SADD ((uint32_t)0x000003FF) /*!< Slave address (master mode) */
+#define I2C_CR2_RD_WRN ((uint32_t)0x00000400) /*!< Transfer direction (master mode) */
+#define I2C_CR2_ADD10 ((uint32_t)0x00000800) /*!< 10-bit addressing mode (master mode) */
+#define I2C_CR2_HEAD10R ((uint32_t)0x00001000) /*!< 10-bit address header only read direction (master mode) */
+#define I2C_CR2_START ((uint32_t)0x00002000) /*!< START generation */
+#define I2C_CR2_STOP ((uint32_t)0x00004000) /*!< STOP generation (master mode) */
+#define I2C_CR2_NACK ((uint32_t)0x00008000) /*!< NACK generation (slave mode) */
+#define I2C_CR2_NBYTES ((uint32_t)0x00FF0000) /*!< Number of bytes */
+#define I2C_CR2_RELOAD ((uint32_t)0x01000000) /*!< NBYTES reload mode */
+#define I2C_CR2_AUTOEND ((uint32_t)0x02000000) /*!< Automatic end mode (master mode) */
+#define I2C_CR2_PECBYTE ((uint32_t)0x04000000) /*!< Packet error checking byte */
+
+/******************* Bit definition for I2C_OAR1 register ******************/
+#define I2C_OAR1_OA1 ((uint32_t)0x000003FF) /*!< Interface own address 1 */
+#define I2C_OAR1_OA1MODE ((uint32_t)0x00000400) /*!< Own address 1 10-bit mode */
+#define I2C_OAR1_OA1EN ((uint32_t)0x00008000) /*!< Own address 1 enable */
+
+/******************* Bit definition for I2C_OAR2 register ******************/
+#define I2C_OAR2_OA2 ((uint32_t)0x000000FE) /*!< Interface own address 2 */
+#define I2C_OAR2_OA2MSK ((uint32_t)0x00000700) /*!< Own address 2 masks */
+#define I2C_OAR2_OA2EN ((uint32_t)0x00008000) /*!< Own address 2 enable */
+
+/******************* Bit definition for I2C_TIMINGR register ****************/
+#define I2C_TIMINGR_SCLL ((uint32_t)0x000000FF) /*!< SCL low period (master mode) */
+#define I2C_TIMINGR_SCLH ((uint32_t)0x0000FF00) /*!< SCL high period (master mode) */
+#define I2C_TIMINGR_SDADEL ((uint32_t)0x000F0000) /*!< Data hold time */
+#define I2C_TIMINGR_SCLDEL ((uint32_t)0x00F00000) /*!< Data setup time */
+#define I2C_TIMINGR_PRESC ((uint32_t)0xF0000000) /*!< Timings prescaler */
+
+/******************* Bit definition for I2C_TIMEOUTR register ****************/
+#define I2C_TIMEOUTR_TIMEOUTA ((uint32_t)0x00000FFF) /*!< Bus timeout A */
+#define I2C_TIMEOUTR_TIDLE ((uint32_t)0x00001000) /*!< Idle clock timeout detection */
+#define I2C_TIMEOUTR_TIMOUTEN ((uint32_t)0x00008000) /*!< Clock timeout enable */
+#define I2C_TIMEOUTR_TIMEOUTB ((uint32_t)0x0FFF0000) /*!< Bus timeout B*/
+#define I2C_TIMEOUTR_TEXTEN ((uint32_t)0x80000000) /*!< Extended clock timeout enable */
+
+/****************** Bit definition for I2C_ISR register ********************/
+#define I2C_ISR_TXE ((uint32_t)0x00000001) /*!< Transmit data register empty */
+#define I2C_ISR_TXIS ((uint32_t)0x00000002) /*!< Transmit interrupt status */
+#define I2C_ISR_RXNE ((uint32_t)0x00000004) /*!< Receive data register not empty */
+#define I2C_ISR_ADDR ((uint32_t)0x00000008) /*!< Address matched (slave mode)*/
+#define I2C_ISR_NACKF ((uint32_t)0x00000010) /*!< NACK received flag */
+#define I2C_ISR_STOPF ((uint32_t)0x00000020) /*!< STOP detection flag */
+#define I2C_ISR_TC ((uint32_t)0x00000040) /*!< Transfer complete (master mode) */
+#define I2C_ISR_TCR ((uint32_t)0x00000080) /*!< Transfer complete reload */
+#define I2C_ISR_BERR ((uint32_t)0x00000100) /*!< Bus error */
+#define I2C_ISR_ARLO ((uint32_t)0x00000200) /*!< Arbitration lost */
+#define I2C_ISR_OVR ((uint32_t)0x00000400) /*!< Overrun/Underrun */
+#define I2C_ISR_PECERR ((uint32_t)0x00000800) /*!< PEC error in reception */
+#define I2C_ISR_TIMEOUT ((uint32_t)0x00001000) /*!< Timeout or Tlow detection flag */
+#define I2C_ISR_ALERT ((uint32_t)0x00002000) /*!< SMBus alert */
+#define I2C_ISR_BUSY ((uint32_t)0x00008000) /*!< Bus busy */
+#define I2C_ISR_DIR ((uint32_t)0x00010000) /*!< Transfer direction (slave mode) */
+#define I2C_ISR_ADDCODE ((uint32_t)0x00FE0000) /*!< Address match code (slave mode) */
+
+/****************** Bit definition for I2C_ICR register ********************/
+#define I2C_ICR_ADDRCF ((uint32_t)0x00000008) /*!< Address matched clear flag */
+#define I2C_ICR_NACKCF ((uint32_t)0x00000010) /*!< NACK clear flag */
+#define I2C_ICR_STOPCF ((uint32_t)0x00000020) /*!< STOP detection clear flag */
+#define I2C_ICR_BERRCF ((uint32_t)0x00000100) /*!< Bus error clear flag */
+#define I2C_ICR_ARLOCF ((uint32_t)0x00000200) /*!< Arbitration lost clear flag */
+#define I2C_ICR_OVRCF ((uint32_t)0x00000400) /*!< Overrun/Underrun clear flag */
+#define I2C_ICR_PECCF ((uint32_t)0x00000800) /*!< PAC error clear flag */
+#define I2C_ICR_TIMOUTCF ((uint32_t)0x00001000) /*!< Timeout clear flag */
+#define I2C_ICR_ALERTCF ((uint32_t)0x00002000) /*!< Alert clear flag */
+
+/****************** Bit definition for I2C_PECR register *******************/
+#define I2C_PECR_PEC ((uint32_t)0x000000FF) /*!< PEC register */
+
+/****************** Bit definition for I2C_RXDR register *********************/
+#define I2C_RXDR_RXDATA ((uint32_t)0x000000FF) /*!< 8-bit receive data */
+
+/****************** Bit definition for I2C_TXDR register *******************/
+#define I2C_TXDR_TXDATA ((uint32_t)0x000000FF) /*!< 8-bit transmit data */
+
+/*****************************************************************************/
+/* */
+/* Independent WATCHDOG (IWDG) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for IWDG_KR register *******************/
+#define IWDG_KR_KEY ((uint32_t)0xFFFF) /*!< Key value (write only, read 0000h) */
+
+/******************* Bit definition for IWDG_PR register *******************/
+#define IWDG_PR_PR ((uint32_t)0x07) /*!< PR[2:0] (Prescaler divider) */
+#define IWDG_PR_PR_0 ((uint32_t)0x01) /*!< Bit 0 */
+#define IWDG_PR_PR_1 ((uint32_t)0x02) /*!< Bit 1 */
+#define IWDG_PR_PR_2 ((uint32_t)0x04) /*!< Bit 2 */
+
+/******************* Bit definition for IWDG_RLR register ******************/
+#define IWDG_RLR_RL ((uint32_t)0x0FFF) /*!< Watchdog counter reload value */
+
+/******************* Bit definition for IWDG_SR register *******************/
+#define IWDG_SR_PVU ((uint32_t)0x01) /*!< Watchdog prescaler value update */
+#define IWDG_SR_RVU ((uint32_t)0x02) /*!< Watchdog counter reload value update */
+#define IWDG_SR_WVU ((uint32_t)0x04) /*!< Watchdog counter window value update */
+
+/******************* Bit definition for IWDG_KR register *******************/
+#define IWDG_WINR_WIN ((uint32_t)0x0FFF) /*!< Watchdog counter window value */
+
+/*****************************************************************************/
+/* */
+/* Power Control (PWR) */
+/* */
+/*****************************************************************************/
+
+/******************** Bit definition for PWR_CR register *******************/
+#define PWR_CR_LPDS ((uint32_t)0x00000001) /*!< Low-power Deepsleep */
+#define PWR_CR_PDDS ((uint32_t)0x00000002) /*!< Power Down Deepsleep */
+#define PWR_CR_CWUF ((uint32_t)0x00000004) /*!< Clear Wakeup Flag */
+#define PWR_CR_CSBF ((uint32_t)0x00000008) /*!< Clear Standby Flag */
+#define PWR_CR_DBP ((uint32_t)0x00000100) /*!< Disable Backup Domain write protection */
+
+/******************* Bit definition for PWR_CSR register *******************/
+#define PWR_CSR_WUF ((uint32_t)0x00000001) /*!< Wakeup Flag */
+#define PWR_CSR_SBF ((uint32_t)0x00000002) /*!< Standby Flag */
+
+#define PWR_CSR_EWUP1 ((uint32_t)0x00000100) /*!< Enable WKUP pin 1 */
+#define PWR_CSR_EWUP2 ((uint32_t)0x00000200) /*!< Enable WKUP pin 2 */
+#define PWR_CSR_EWUP4 ((uint32_t)0x00000800) /*!< Enable WKUP pin 4 */
+#define PWR_CSR_EWUP5 ((uint32_t)0x00001000) /*!< Enable WKUP pin 5 */
+#define PWR_CSR_EWUP6 ((uint32_t)0x00002000) /*!< Enable WKUP pin 6 */
+#define PWR_CSR_EWUP7 ((uint32_t)0x00004000) /*!< Enable WKUP pin 7 */
+
+/*****************************************************************************/
+/* */
+/* Reset and Clock Control */
+/* */
+/*****************************************************************************/
+
+/******************** Bit definition for RCC_CR register *******************/
+#define RCC_CR_HSION ((uint32_t)0x00000001) /*!< Internal High Speed clock enable */
+#define RCC_CR_HSIRDY ((uint32_t)0x00000002) /*!< Internal High Speed clock ready flag */
+
+#define RCC_CR_HSITRIM ((uint32_t)0x000000F8) /*!< Internal High Speed clock trimming */
+#define RCC_CR_HSITRIM_0 ((uint32_t)0x00000008) /*!<Bit 0 */
+#define RCC_CR_HSITRIM_1 ((uint32_t)0x00000010) /*!<Bit 1 */
+#define RCC_CR_HSITRIM_2 ((uint32_t)0x00000020) /*!<Bit 2 */
+#define RCC_CR_HSITRIM_3 ((uint32_t)0x00000040) /*!<Bit 3 */
+#define RCC_CR_HSITRIM_4 ((uint32_t)0x00000080) /*!<Bit 4 */
+
+#define RCC_CR_HSICAL ((uint32_t)0x0000FF00) /*!< Internal High Speed clock Calibration */
+#define RCC_CR_HSICAL_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define RCC_CR_HSICAL_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define RCC_CR_HSICAL_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define RCC_CR_HSICAL_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define RCC_CR_HSICAL_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+#define RCC_CR_HSICAL_5 ((uint32_t)0x00002000) /*!<Bit 5 */
+#define RCC_CR_HSICAL_6 ((uint32_t)0x00004000) /*!<Bit 6 */
+#define RCC_CR_HSICAL_7 ((uint32_t)0x00008000) /*!<Bit 7 */
+
+#define RCC_CR_HSEON ((uint32_t)0x00010000) /*!< External High Speed clock enable */
+#define RCC_CR_HSERDY ((uint32_t)0x00020000) /*!< External High Speed clock ready flag */
+#define RCC_CR_HSEBYP ((uint32_t)0x00040000) /*!< External High Speed clock Bypass */
+#define RCC_CR_CSSON ((uint32_t)0x00080000) /*!< Clock Security System enable */
+#define RCC_CR_PLLON ((uint32_t)0x01000000) /*!< PLL enable */
+#define RCC_CR_PLLRDY ((uint32_t)0x02000000) /*!< PLL clock ready flag */
+
+/******************** Bit definition for RCC_CFGR register *****************/
+/*!< SW configuration */
+#define RCC_CFGR_SW ((uint32_t)0x00000003) /*!< SW[1:0] bits (System clock Switch) */
+#define RCC_CFGR_SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR_SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+#define RCC_CFGR_SW_HSI ((uint32_t)0x00000000) /*!< HSI selected as system clock */
+#define RCC_CFGR_SW_HSE ((uint32_t)0x00000001) /*!< HSE selected as system clock */
+#define RCC_CFGR_SW_PLL ((uint32_t)0x00000002) /*!< PLL selected as system clock */
+
+/*!< SWS configuration */
+#define RCC_CFGR_SWS ((uint32_t)0x0000000C) /*!< SWS[1:0] bits (System Clock Switch Status) */
+#define RCC_CFGR_SWS_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define RCC_CFGR_SWS_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+
+#define RCC_CFGR_SWS_HSI ((uint32_t)0x00000000) /*!< HSI oscillator used as system clock */
+#define RCC_CFGR_SWS_HSE ((uint32_t)0x00000004) /*!< HSE oscillator used as system clock */
+#define RCC_CFGR_SWS_PLL ((uint32_t)0x00000008) /*!< PLL used as system clock */
+
+/*!< HPRE configuration */
+#define RCC_CFGR_HPRE ((uint32_t)0x000000F0) /*!< HPRE[3:0] bits (AHB prescaler) */
+#define RCC_CFGR_HPRE_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define RCC_CFGR_HPRE_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define RCC_CFGR_HPRE_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+#define RCC_CFGR_HPRE_3 ((uint32_t)0x00000080) /*!< Bit 3 */
+
+#define RCC_CFGR_HPRE_DIV1 ((uint32_t)0x00000000) /*!< SYSCLK not divided */
+#define RCC_CFGR_HPRE_DIV2 ((uint32_t)0x00000080) /*!< SYSCLK divided by 2 */
+#define RCC_CFGR_HPRE_DIV4 ((uint32_t)0x00000090) /*!< SYSCLK divided by 4 */
+#define RCC_CFGR_HPRE_DIV8 ((uint32_t)0x000000A0) /*!< SYSCLK divided by 8 */
+#define RCC_CFGR_HPRE_DIV16 ((uint32_t)0x000000B0) /*!< SYSCLK divided by 16 */
+#define RCC_CFGR_HPRE_DIV64 ((uint32_t)0x000000C0) /*!< SYSCLK divided by 64 */
+#define RCC_CFGR_HPRE_DIV128 ((uint32_t)0x000000D0) /*!< SYSCLK divided by 128 */
+#define RCC_CFGR_HPRE_DIV256 ((uint32_t)0x000000E0) /*!< SYSCLK divided by 256 */
+#define RCC_CFGR_HPRE_DIV512 ((uint32_t)0x000000F0) /*!< SYSCLK divided by 512 */
+
+/*!< PPRE configuration */
+#define RCC_CFGR_PPRE ((uint32_t)0x00000700) /*!< PRE[2:0] bits (APB prescaler) */
+#define RCC_CFGR_PPRE_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define RCC_CFGR_PPRE_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define RCC_CFGR_PPRE_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+
+#define RCC_CFGR_PPRE_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */
+#define RCC_CFGR_PPRE_DIV2 ((uint32_t)0x00000400) /*!< HCLK divided by 2 */
+#define RCC_CFGR_PPRE_DIV4 ((uint32_t)0x00000500) /*!< HCLK divided by 4 */
+#define RCC_CFGR_PPRE_DIV8 ((uint32_t)0x00000600) /*!< HCLK divided by 8 */
+#define RCC_CFGR_PPRE_DIV16 ((uint32_t)0x00000700) /*!< HCLK divided by 16 */
+
+/*!< ADCPPRE configuration: obsolete setting for STM32F030xC */
+/*#define RCC_CFGR_ADCPRE ((uint32_t)0x00004000)*/ /*!< ADCPRE bit (ADC prescaler) */
+
+/*#define RCC_CFGR_ADCPRE_DIV2 ((uint32_t)0x00000000)*/ /*!< PCLK divided by 2 */
+/*#define RCC_CFGR_ADCPRE_DIV4 ((uint32_t)0x00004000)*/ /*!< PCLK divided by 4 */
+
+#define RCC_CFGR_PLLSRC ((uint32_t)0x00018000) /*!< PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSI_DIV2 ((uint32_t)0x00000000) /*!< HSI clock divided by 2 selected as PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSI_PREDIV ((uint32_t)0x00008000) /*!< HSI/PREDIV clock selected as PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSE_PREDIV ((uint32_t)0x00010000) /*!< HSE/PREDIV clock selected as PLL entry clock source */
+
+#define RCC_CFGR_PLLXTPRE ((uint32_t)0x00020000) /*!< HSE divider for PLL entry */
+#define RCC_CFGR_PLLXTPRE_HSE_PREDIV_DIV1 ((uint32_t)0x00000000) /*!< HSE/PREDIV clock not divided for PLL entry */
+#define RCC_CFGR_PLLXTPRE_HSE_PREDIV_DIV2 ((uint32_t)0x00020000) /*!< HSE/PREDIV clock divided by 2 for PLL entry */
+
+/*!< PLLMUL configuration */
+#define RCC_CFGR_PLLMUL ((uint32_t)0x003C0000) /*!< PLLMUL[3:0] bits (PLL multiplication factor) */
+#define RCC_CFGR_PLLMUL_0 ((uint32_t)0x00040000) /*!< Bit 0 */
+#define RCC_CFGR_PLLMUL_1 ((uint32_t)0x00080000) /*!< Bit 1 */
+#define RCC_CFGR_PLLMUL_2 ((uint32_t)0x00100000) /*!< Bit 2 */
+#define RCC_CFGR_PLLMUL_3 ((uint32_t)0x00200000) /*!< Bit 3 */
+
+#define RCC_CFGR_PLLMUL2 ((uint32_t)0x00000000) /*!< PLL input clock*2 */
+#define RCC_CFGR_PLLMUL3 ((uint32_t)0x00040000) /*!< PLL input clock*3 */
+#define RCC_CFGR_PLLMUL4 ((uint32_t)0x00080000) /*!< PLL input clock*4 */
+#define RCC_CFGR_PLLMUL5 ((uint32_t)0x000C0000) /*!< PLL input clock*5 */
+#define RCC_CFGR_PLLMUL6 ((uint32_t)0x00100000) /*!< PLL input clock*6 */
+#define RCC_CFGR_PLLMUL7 ((uint32_t)0x00140000) /*!< PLL input clock*7 */
+#define RCC_CFGR_PLLMUL8 ((uint32_t)0x00180000) /*!< PLL input clock*8 */
+#define RCC_CFGR_PLLMUL9 ((uint32_t)0x001C0000) /*!< PLL input clock*9 */
+#define RCC_CFGR_PLLMUL10 ((uint32_t)0x00200000) /*!< PLL input clock10 */
+#define RCC_CFGR_PLLMUL11 ((uint32_t)0x00240000) /*!< PLL input clock*11 */
+#define RCC_CFGR_PLLMUL12 ((uint32_t)0x00280000) /*!< PLL input clock*12 */
+#define RCC_CFGR_PLLMUL13 ((uint32_t)0x002C0000) /*!< PLL input clock*13 */
+#define RCC_CFGR_PLLMUL14 ((uint32_t)0x00300000) /*!< PLL input clock*14 */
+#define RCC_CFGR_PLLMUL15 ((uint32_t)0x00340000) /*!< PLL input clock*15 */
+#define RCC_CFGR_PLLMUL16 ((uint32_t)0x00380000) /*!< PLL input clock*16 */
+
+/*!< MCO configuration */
+#define RCC_CFGR_MCO ((uint32_t)0x0F000000) /*!< MCO[3:0] bits (Microcontroller Clock Output) */
+#define RCC_CFGR_MCO_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define RCC_CFGR_MCO_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define RCC_CFGR_MCO_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+#define RCC_CFGR_MCO_3 ((uint32_t)0x08000000) /*!< Bit 3 */
+
+#define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
+#define RCC_CFGR_MCO_HSI14 ((uint32_t)0x01000000) /*!< HSI14 clock selected as MCO source */
+#define RCC_CFGR_MCO_LSI ((uint32_t)0x02000000) /*!< LSI clock selected as MCO source */
+#define RCC_CFGR_MCO_LSE ((uint32_t)0x03000000) /*!< LSE clock selected as MCO source */
+#define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x04000000) /*!< System clock selected as MCO source */
+#define RCC_CFGR_MCO_HSI ((uint32_t)0x05000000) /*!< HSI clock selected as MCO source */
+#define RCC_CFGR_MCO_HSE ((uint32_t)0x06000000) /*!< HSE clock selected as MCO source */
+#define RCC_CFGR_MCO_PLL ((uint32_t)0x07000000) /*!< PLL clock divided by 2 selected as MCO source */
+
+#define RCC_CFGR_MCOPRE ((uint32_t)0x70000000) /*!< MCO prescaler */
+#define RCC_CFGR_MCOPRE_DIV1 ((uint32_t)0x00000000) /*!< MCO is divided by 1 */
+#define RCC_CFGR_MCOPRE_DIV2 ((uint32_t)0x10000000) /*!< MCO is divided by 2 */
+#define RCC_CFGR_MCOPRE_DIV4 ((uint32_t)0x20000000) /*!< MCO is divided by 4 */
+#define RCC_CFGR_MCOPRE_DIV8 ((uint32_t)0x30000000) /*!< MCO is divided by 8 */
+#define RCC_CFGR_MCOPRE_DIV16 ((uint32_t)0x40000000) /*!< MCO is divided by 16 */
+#define RCC_CFGR_MCOPRE_DIV32 ((uint32_t)0x50000000) /*!< MCO is divided by 32 */
+#define RCC_CFGR_MCOPRE_DIV64 ((uint32_t)0x60000000) /*!< MCO is divided by 64 */
+#define RCC_CFGR_MCOPRE_DIV128 ((uint32_t)0x70000000) /*!< MCO is divided by 128 */
+
+#define RCC_CFGR_PLLNODIV ((uint32_t)0x80000000) /*!< PLL is not divided to MCO */
+
+/*!<****************** Bit definition for RCC_CIR register *****************/
+#define RCC_CIR_LSIRDYF ((uint32_t)0x00000001) /*!< LSI Ready Interrupt flag */
+#define RCC_CIR_LSERDYF ((uint32_t)0x00000002) /*!< LSE Ready Interrupt flag */
+#define RCC_CIR_HSIRDYF ((uint32_t)0x00000004) /*!< HSI Ready Interrupt flag */
+#define RCC_CIR_HSERDYF ((uint32_t)0x00000008) /*!< HSE Ready Interrupt flag */
+#define RCC_CIR_PLLRDYF ((uint32_t)0x00000010) /*!< PLL Ready Interrupt flag */
+#define RCC_CIR_HSI14RDYF ((uint32_t)0x00000020) /*!< HSI14 Ready Interrupt flag */
+#define RCC_CIR_CSSF ((uint32_t)0x00000080) /*!< Clock Security System Interrupt flag */
+#define RCC_CIR_LSIRDYIE ((uint32_t)0x00000100) /*!< LSI Ready Interrupt Enable */
+#define RCC_CIR_LSERDYIE ((uint32_t)0x00000200) /*!< LSE Ready Interrupt Enable */
+#define RCC_CIR_HSIRDYIE ((uint32_t)0x00000400) /*!< HSI Ready Interrupt Enable */
+#define RCC_CIR_HSERDYIE ((uint32_t)0x00000800) /*!< HSE Ready Interrupt Enable */
+#define RCC_CIR_PLLRDYIE ((uint32_t)0x00001000) /*!< PLL Ready Interrupt Enable */
+#define RCC_CIR_HSI14RDYIE ((uint32_t)0x00002000) /*!< HSI14 Ready Interrupt Enable */
+#define RCC_CIR_LSIRDYC ((uint32_t)0x00010000) /*!< LSI Ready Interrupt Clear */
+#define RCC_CIR_LSERDYC ((uint32_t)0x00020000) /*!< LSE Ready Interrupt Clear */
+#define RCC_CIR_HSIRDYC ((uint32_t)0x00040000) /*!< HSI Ready Interrupt Clear */
+#define RCC_CIR_HSERDYC ((uint32_t)0x00080000) /*!< HSE Ready Interrupt Clear */
+#define RCC_CIR_PLLRDYC ((uint32_t)0x00100000) /*!< PLL Ready Interrupt Clear */
+#define RCC_CIR_HSI14RDYC ((uint32_t)0x00200000) /*!< HSI14 Ready Interrupt Clear */
+#define RCC_CIR_CSSC ((uint32_t)0x00800000) /*!< Clock Security System Interrupt Clear */
+
+/***************** Bit definition for RCC_APB2RSTR register ****************/
+#define RCC_APB2RSTR_SYSCFGRST ((uint32_t)0x00000001) /*!< SYSCFG clock reset */
+#define RCC_APB2RSTR_ADCRST ((uint32_t)0x00000200) /*!< ADC clock reset */
+#define RCC_APB2RSTR_USART6RST ((uint32_t)0x00000020) /*!< USART6 clock reset */
+#define RCC_APB2RSTR_TIM1RST ((uint32_t)0x00000800) /*!< TIM1 clock reset */
+#define RCC_APB2RSTR_SPI1RST ((uint32_t)0x00001000) /*!< SPI1 clock reset */
+#define RCC_APB2RSTR_USART1RST ((uint32_t)0x00004000) /*!< USART1 clock reset */
+#define RCC_APB2RSTR_TIM15RST ((uint32_t)0x00010000) /*!< TIM15 clock reset */
+#define RCC_APB2RSTR_TIM16RST ((uint32_t)0x00020000) /*!< TIM16 clock reset */
+#define RCC_APB2RSTR_TIM17RST ((uint32_t)0x00040000) /*!< TIM17 clock reset */
+#define RCC_APB2RSTR_DBGMCURST ((uint32_t)0x00400000) /*!< DBGMCU clock reset */
+
+/*!< Old ADC1 clock reset bit definition maintained for legacy purpose */
+#define RCC_APB2RSTR_ADC1RST RCC_APB2RSTR_ADCRST
+
+/***************** Bit definition for RCC_APB1RSTR register ****************/
+#define RCC_APB1RSTR_TIM3RST ((uint32_t)0x00000002) /*!< Timer 3 clock reset */
+#define RCC_APB1RSTR_TIM6RST ((uint32_t)0x00000010) /*!< Timer 6 clock reset */
+#define RCC_APB1RSTR_TIM7RST ((uint32_t)0x00000020) /*!< Timer 7 clock reset */
+#define RCC_APB1RSTR_TIM14RST ((uint32_t)0x00000100) /*!< Timer 14 clock reset */
+#define RCC_APB1RSTR_WWDGRST ((uint32_t)0x00000800) /*!< Window Watchdog clock reset */
+#define RCC_APB1RSTR_SPI2RST ((uint32_t)0x00004000) /*!< SPI2 clock reset */
+#define RCC_APB1RSTR_USART2RST ((uint32_t)0x00020000) /*!< USART 2 clock reset */
+#define RCC_APB1RSTR_USART3RST ((uint32_t)0x00040000) /*!< USART 3 clock reset */
+#define RCC_APB1RSTR_USART4RST ((uint32_t)0x00080000) /*!< USART 4 clock reset */
+#define RCC_APB1RSTR_USART5RST ((uint32_t)0x00100000) /*!< USART 5 clock reset */
+#define RCC_APB1RSTR_I2C1RST ((uint32_t)0x00200000) /*!< I2C 1 clock reset */
+#define RCC_APB1RSTR_I2C2RST ((uint32_t)0x00400000) /*!< I2C 2 clock reset */
+#define RCC_APB1RSTR_PWRRST ((uint32_t)0x10000000) /*!< PWR clock reset */
+
+/****************** Bit definition for RCC_AHBENR register *****************/
+#define RCC_AHBENR_DMAEN ((uint32_t)0x00000001) /*!< DMA1 clock enable */
+#define RCC_AHBENR_SRAMEN ((uint32_t)0x00000004) /*!< SRAM interface clock enable */
+#define RCC_AHBENR_FLITFEN ((uint32_t)0x00000010) /*!< FLITF clock enable */
+#define RCC_AHBENR_CRCEN ((uint32_t)0x00000040) /*!< CRC clock enable */
+#define RCC_AHBENR_GPIOAEN ((uint32_t)0x00020000) /*!< GPIOA clock enable */
+#define RCC_AHBENR_GPIOBEN ((uint32_t)0x00040000) /*!< GPIOB clock enable */
+#define RCC_AHBENR_GPIOCEN ((uint32_t)0x00080000) /*!< GPIOC clock enable */
+#define RCC_AHBENR_GPIODEN ((uint32_t)0x00100000) /*!< GPIOD clock enable */
+#define RCC_AHBENR_GPIOEEN ((uint32_t)0x00200000) /*!< GPIOE clock enable */
+#define RCC_AHBENR_GPIOFEN ((uint32_t)0x00400000) /*!< GPIOF clock enable */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_AHBENR_DMA1EN RCC_AHBENR_DMAEN /*!< DMA1 clock enable */
+
+/***************** Bit definition for RCC_APB2ENR register *****************/
+#define RCC_APB2ENR_SYSCFGCOMPEN ((uint32_t)0x00000001) /*!< SYSCFG and comparator clock enable */
+#define RCC_APB2ENR_ADCEN ((uint32_t)0x00000200) /*!< ADC1 clock enable */
+#define RCC_APB2ENR_USART6EN ((uint32_t)0x00000020) /*!< USART6 clock enable */
+#define RCC_APB2ENR_TIM1EN ((uint32_t)0x00000800) /*!< TIM1 clock enable */
+#define RCC_APB2ENR_SPI1EN ((uint32_t)0x00001000) /*!< SPI1 clock enable */
+#define RCC_APB2ENR_USART1EN ((uint32_t)0x00004000) /*!< USART1 clock enable */
+#define RCC_APB2ENR_TIM15EN ((uint32_t)0x00010000) /*!< TIM15 clock enable */
+#define RCC_APB2ENR_TIM16EN ((uint32_t)0x00020000) /*!< TIM16 clock enable */
+#define RCC_APB2ENR_TIM17EN ((uint32_t)0x00040000) /*!< TIM17 clock enable */
+#define RCC_APB2ENR_DBGMCUEN ((uint32_t)0x00400000) /*!< DBGMCU clock enable */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_APB2ENR_SYSCFGEN RCC_APB2ENR_SYSCFGCOMPEN /*!< SYSCFG clock enable */
+#define RCC_APB2ENR_ADC1EN RCC_APB2ENR_ADCEN /*!< ADC1 clock enable */
+
+/***************** Bit definition for RCC_APB1ENR register *****************/
+#define RCC_APB1ENR_TIM3EN ((uint32_t)0x00000002) /*!< Timer 3 clock enable */
+#define RCC_APB1ENR_TIM6EN ((uint32_t)0x00000010) /*!< Timer 6 clock enable */
+#define RCC_APB1ENR_TIM7EN ((uint32_t)0x00000020) /*!< Timer 7 clock enable */
+#define RCC_APB1ENR_TIM14EN ((uint32_t)0x00000100) /*!< Timer 14 clock enable */
+#define RCC_APB1ENR_WWDGEN ((uint32_t)0x00000800) /*!< Window Watchdog clock enable */
+#define RCC_APB1ENR_SPI2EN ((uint32_t)0x00004000) /*!< SPI2 clock enable */
+#define RCC_APB1ENR_USART2EN ((uint32_t)0x00020000) /*!< USART2 clock enable */
+#define RCC_APB1ENR_USART3EN ((uint32_t)0x00040000) /*!< USART3 clock enable */
+#define RCC_APB1ENR_USART4EN ((uint32_t)0x00080000) /*!< USART4 clock enable */
+#define RCC_APB1ENR_USART5EN ((uint32_t)0x00100000) /*!< USART5 clock enable */
+#define RCC_APB1ENR_I2C1EN ((uint32_t)0x00200000) /*!< I2C1 clock enable */
+#define RCC_APB1ENR_I2C2EN ((uint32_t)0x00400000) /*!< I2C2 clock enable */
+#define RCC_APB1ENR_PWREN ((uint32_t)0x10000000) /*!< PWR clock enable */
+
+/******************* Bit definition for RCC_BDCR register ******************/
+#define RCC_BDCR_LSEON ((uint32_t)0x00000001) /*!< External Low Speed oscillator enable */
+#define RCC_BDCR_LSERDY ((uint32_t)0x00000002) /*!< External Low Speed oscillator Ready */
+#define RCC_BDCR_LSEBYP ((uint32_t)0x00000004) /*!< External Low Speed oscillator Bypass */
+
+#define RCC_BDCR_LSEDRV ((uint32_t)0x00000018) /*!< LSEDRV[1:0] bits (LSE Osc. drive capability) */
+#define RCC_BDCR_LSEDRV_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define RCC_BDCR_LSEDRV_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+
+#define RCC_BDCR_RTCSEL ((uint32_t)0x00000300) /*!< RTCSEL[1:0] bits (RTC clock source selection) */
+#define RCC_BDCR_RTCSEL_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define RCC_BDCR_RTCSEL_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+
+/*!< RTC configuration */
+#define RCC_BDCR_RTCSEL_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
+#define RCC_BDCR_RTCSEL_LSE ((uint32_t)0x00000100) /*!< LSE oscillator clock used as RTC clock */
+#define RCC_BDCR_RTCSEL_LSI ((uint32_t)0x00000200) /*!< LSI oscillator clock used as RTC clock */
+#define RCC_BDCR_RTCSEL_HSE ((uint32_t)0x00000300) /*!< HSE oscillator clock divided by 128 used as RTC clock */
+
+#define RCC_BDCR_RTCEN ((uint32_t)0x00008000) /*!< RTC clock enable */
+#define RCC_BDCR_BDRST ((uint32_t)0x00010000) /*!< Backup domain software reset */
+
+/******************* Bit definition for RCC_CSR register *******************/
+#define RCC_CSR_LSION ((uint32_t)0x00000001) /*!< Internal Low Speed oscillator enable */
+#define RCC_CSR_LSIRDY ((uint32_t)0x00000002) /*!< Internal Low Speed oscillator Ready */
+#define RCC_CSR_V18PWRRSTF ((uint32_t)0x00800000) /*!< V1.8 power domain reset flag */
+#define RCC_CSR_RMVF ((uint32_t)0x01000000) /*!< Remove reset flag */
+#define RCC_CSR_OBLRSTF ((uint32_t)0x02000000) /*!< OBL reset flag */
+#define RCC_CSR_PINRSTF ((uint32_t)0x04000000) /*!< PIN reset flag */
+#define RCC_CSR_PORRSTF ((uint32_t)0x08000000) /*!< POR/PDR reset flag */
+#define RCC_CSR_SFTRSTF ((uint32_t)0x10000000) /*!< Software Reset flag */
+#define RCC_CSR_IWDGRSTF ((uint32_t)0x20000000) /*!< Independent Watchdog reset flag */
+#define RCC_CSR_WWDGRSTF ((uint32_t)0x40000000) /*!< Window watchdog reset flag */
+#define RCC_CSR_LPWRRSTF ((uint32_t)0x80000000) /*!< Low-Power reset flag */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_CSR_OBL RCC_CSR_OBLRSTF /*!< OBL reset flag */
+
+/******************* Bit definition for RCC_AHBRSTR register ***************/
+#define RCC_AHBRSTR_GPIOARST ((uint32_t)0x00020000) /*!< GPIOA clock reset */
+#define RCC_AHBRSTR_GPIOBRST ((uint32_t)0x00040000) /*!< GPIOB clock reset */
+#define RCC_AHBRSTR_GPIOCRST ((uint32_t)0x00080000) /*!< GPIOC clock reset */
+#define RCC_AHBRSTR_GPIODRST ((uint32_t)0x00100000) /*!< GPIOD clock reset */
+#define RCC_AHBRSTR_GPIOERST ((uint32_t)0x00200000) /*!< GPIOE clock reset */
+#define RCC_AHBRSTR_GPIOFRST ((uint32_t)0x00400000) /*!< GPIOF clock reset */
+
+/******************* Bit definition for RCC_CFGR2 register *****************/
+/*!< PREDIV configuration */
+#define RCC_CFGR2_PREDIV ((uint32_t)0x0000000F) /*!< PREDIV[3:0] bits */
+#define RCC_CFGR2_PREDIV_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR2_PREDIV_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define RCC_CFGR2_PREDIV_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define RCC_CFGR2_PREDIV_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+
+#define RCC_CFGR2_PREDIV_DIV1 ((uint32_t)0x00000000) /*!< PREDIV input clock not divided */
+#define RCC_CFGR2_PREDIV_DIV2 ((uint32_t)0x00000001) /*!< PREDIV input clock divided by 2 */
+#define RCC_CFGR2_PREDIV_DIV3 ((uint32_t)0x00000002) /*!< PREDIV input clock divided by 3 */
+#define RCC_CFGR2_PREDIV_DIV4 ((uint32_t)0x00000003) /*!< PREDIV input clock divided by 4 */
+#define RCC_CFGR2_PREDIV_DIV5 ((uint32_t)0x00000004) /*!< PREDIV input clock divided by 5 */
+#define RCC_CFGR2_PREDIV_DIV6 ((uint32_t)0x00000005) /*!< PREDIV input clock divided by 6 */
+#define RCC_CFGR2_PREDIV_DIV7 ((uint32_t)0x00000006) /*!< PREDIV input clock divided by 7 */
+#define RCC_CFGR2_PREDIV_DIV8 ((uint32_t)0x00000007) /*!< PREDIV input clock divided by 8 */
+#define RCC_CFGR2_PREDIV_DIV9 ((uint32_t)0x00000008) /*!< PREDIV input clock divided by 9 */
+#define RCC_CFGR2_PREDIV_DIV10 ((uint32_t)0x00000009) /*!< PREDIV input clock divided by 10 */
+#define RCC_CFGR2_PREDIV_DIV11 ((uint32_t)0x0000000A) /*!< PREDIV input clock divided by 11 */
+#define RCC_CFGR2_PREDIV_DIV12 ((uint32_t)0x0000000B) /*!< PREDIV input clock divided by 12 */
+#define RCC_CFGR2_PREDIV_DIV13 ((uint32_t)0x0000000C) /*!< PREDIV input clock divided by 13 */
+#define RCC_CFGR2_PREDIV_DIV14 ((uint32_t)0x0000000D) /*!< PREDIV input clock divided by 14 */
+#define RCC_CFGR2_PREDIV_DIV15 ((uint32_t)0x0000000E) /*!< PREDIV input clock divided by 15 */
+#define RCC_CFGR2_PREDIV_DIV16 ((uint32_t)0x0000000F) /*!< PREDIV input clock divided by 16 */
+
+/******************* Bit definition for RCC_CFGR3 register *****************/
+/*!< USART1 Clock source selection */
+#define RCC_CFGR3_USART1SW ((uint32_t)0x00000003) /*!< USART1SW[1:0] bits */
+#define RCC_CFGR3_USART1SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR3_USART1SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+#define RCC_CFGR3_USART1SW_PCLK ((uint32_t)0x00000000) /*!< PCLK clock used as USART1 clock source */
+#define RCC_CFGR3_USART1SW_SYSCLK ((uint32_t)0x00000001) /*!< System clock selected as USART1 clock source */
+#define RCC_CFGR3_USART1SW_LSE ((uint32_t)0x00000002) /*!< LSE oscillator clock used as USART1 clock source */
+#define RCC_CFGR3_USART1SW_HSI ((uint32_t)0x00000003) /*!< HSI oscillator clock used as USART1 clock source */
+
+/*!< I2C1 Clock source selection */
+#define RCC_CFGR3_I2C1SW ((uint32_t)0x00000010) /*!< I2C1SW bits */
+
+#define RCC_CFGR3_I2C1SW_HSI ((uint32_t)0x00000000) /*!< HSI oscillator clock used as I2C1 clock source */
+#define RCC_CFGR3_I2C1SW_SYSCLK ((uint32_t)0x00000010) /*!< System clock selected as I2C1 clock source */
+
+/******************* Bit definition for RCC_CR2 register *******************/
+#define RCC_CR2_HSI14ON ((uint32_t)0x00000001) /*!< Internal High Speed 14MHz clock enable */
+#define RCC_CR2_HSI14RDY ((uint32_t)0x00000002) /*!< Internal High Speed 14MHz clock ready flag */
+#define RCC_CR2_HSI14DIS ((uint32_t)0x00000004) /*!< Internal High Speed 14MHz clock disable */
+#define RCC_CR2_HSI14TRIM ((uint32_t)0x000000F8) /*!< Internal High Speed 14MHz clock trimming */
+#define RCC_CR2_HSI14CAL ((uint32_t)0x0000FF00) /*!< Internal High Speed 14MHz clock Calibration */
+
+/*****************************************************************************/
+/* */
+/* Real-Time Clock (RTC) */
+/* */
+/*****************************************************************************/
+/******************** Bits definition for RTC_TR register ******************/
+#define RTC_TR_PM ((uint32_t)0x00400000)
+#define RTC_TR_HT ((uint32_t)0x00300000)
+#define RTC_TR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TR_HU ((uint32_t)0x000F0000)
+#define RTC_TR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TR_MNT ((uint32_t)0x00007000)
+#define RTC_TR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TR_MNU ((uint32_t)0x00000F00)
+#define RTC_TR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TR_ST ((uint32_t)0x00000070)
+#define RTC_TR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TR_SU ((uint32_t)0x0000000F)
+#define RTC_TR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_DR register ******************/
+#define RTC_DR_YT ((uint32_t)0x00F00000)
+#define RTC_DR_YT_0 ((uint32_t)0x00100000)
+#define RTC_DR_YT_1 ((uint32_t)0x00200000)
+#define RTC_DR_YT_2 ((uint32_t)0x00400000)
+#define RTC_DR_YT_3 ((uint32_t)0x00800000)
+#define RTC_DR_YU ((uint32_t)0x000F0000)
+#define RTC_DR_YU_0 ((uint32_t)0x00010000)
+#define RTC_DR_YU_1 ((uint32_t)0x00020000)
+#define RTC_DR_YU_2 ((uint32_t)0x00040000)
+#define RTC_DR_YU_3 ((uint32_t)0x00080000)
+#define RTC_DR_WDU ((uint32_t)0x0000E000)
+#define RTC_DR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_DR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_DR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_DR_MT ((uint32_t)0x00001000)
+#define RTC_DR_MU ((uint32_t)0x00000F00)
+#define RTC_DR_MU_0 ((uint32_t)0x00000100)
+#define RTC_DR_MU_1 ((uint32_t)0x00000200)
+#define RTC_DR_MU_2 ((uint32_t)0x00000400)
+#define RTC_DR_MU_3 ((uint32_t)0x00000800)
+#define RTC_DR_DT ((uint32_t)0x00000030)
+#define RTC_DR_DT_0 ((uint32_t)0x00000010)
+#define RTC_DR_DT_1 ((uint32_t)0x00000020)
+#define RTC_DR_DU ((uint32_t)0x0000000F)
+#define RTC_DR_DU_0 ((uint32_t)0x00000001)
+#define RTC_DR_DU_1 ((uint32_t)0x00000002)
+#define RTC_DR_DU_2 ((uint32_t)0x00000004)
+#define RTC_DR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_CR register ******************/
+#define RTC_CR_COE ((uint32_t)0x00800000)
+#define RTC_CR_OSEL ((uint32_t)0x00600000)
+#define RTC_CR_OSEL_0 ((uint32_t)0x00200000)
+#define RTC_CR_OSEL_1 ((uint32_t)0x00400000)
+#define RTC_CR_POL ((uint32_t)0x00100000)
+#define RTC_CR_COSEL ((uint32_t)0x00080000)
+#define RTC_CR_BCK ((uint32_t)0x00040000)
+#define RTC_CR_SUB1H ((uint32_t)0x00020000)
+#define RTC_CR_ADD1H ((uint32_t)0x00010000)
+#define RTC_CR_TSIE ((uint32_t)0x00008000)
+#define RTC_CR_ALRAIE ((uint32_t)0x00001000)
+#define RTC_CR_TSE ((uint32_t)0x00000800)
+#define RTC_CR_WUTE ((uint32_t)0x00000400)
+#define RTC_CR_ALRAE ((uint32_t)0x00000100)
+#define RTC_CR_FMT ((uint32_t)0x00000040)
+#define RTC_CR_BYPSHAD ((uint32_t)0x00000020)
+#define RTC_CR_REFCKON ((uint32_t)0x00000010)
+#define RTC_CR_TSEDGE ((uint32_t)0x00000008)
+#define RTC_CR_WUCKSEL ((uint32_t)0x00000007)
+#define RTC_CR_WUCKSEL_0 ((uint32_t)0x00000001)
+#define RTC_CR_WUCKSEL_1 ((uint32_t)0x00000002)
+#define RTC_CR_WUCKSEL_2 ((uint32_t)0x00000004)
+
+/******************** Bits definition for RTC_ISR register *****************/
+#define RTC_ISR_RECALPF ((uint32_t)0x00010000)
+#define RTC_ISR_TAMP2F ((uint32_t)0x00004000)
+#define RTC_ISR_TAMP1F ((uint32_t)0x00002000)
+#define RTC_ISR_TSOVF ((uint32_t)0x00001000)
+#define RTC_ISR_TSF ((uint32_t)0x00000800)
+#define RTC_ISR_WUTF ((uint32_t)0x00000400)
+#define RTC_ISR_ALRAF ((uint32_t)0x00000100)
+#define RTC_ISR_INIT ((uint32_t)0x00000080)
+#define RTC_ISR_INITF ((uint32_t)0x00000040)
+#define RTC_ISR_RSF ((uint32_t)0x00000020)
+#define RTC_ISR_INITS ((uint32_t)0x00000010)
+#define RTC_ISR_SHPF ((uint32_t)0x00000008)
+#define RTC_ISR_WUTWF ((uint32_t)0x00000004)
+#define RTC_ISR_ALRAWF ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_PRER register ****************/
+#define RTC_PRER_PREDIV_A ((uint32_t)0x007F0000)
+#define RTC_PRER_PREDIV_S ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_WUTR register ****************/
+#define RTC_WUTR_WUT ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_ALRMAR register **************/
+#define RTC_ALRMAR_MSK4 ((uint32_t)0x80000000)
+#define RTC_ALRMAR_WDSEL ((uint32_t)0x40000000)
+#define RTC_ALRMAR_DT ((uint32_t)0x30000000)
+#define RTC_ALRMAR_DT_0 ((uint32_t)0x10000000)
+#define RTC_ALRMAR_DT_1 ((uint32_t)0x20000000)
+#define RTC_ALRMAR_DU ((uint32_t)0x0F000000)
+#define RTC_ALRMAR_DU_0 ((uint32_t)0x01000000)
+#define RTC_ALRMAR_DU_1 ((uint32_t)0x02000000)
+#define RTC_ALRMAR_DU_2 ((uint32_t)0x04000000)
+#define RTC_ALRMAR_DU_3 ((uint32_t)0x08000000)
+#define RTC_ALRMAR_MSK3 ((uint32_t)0x00800000)
+#define RTC_ALRMAR_PM ((uint32_t)0x00400000)
+#define RTC_ALRMAR_HT ((uint32_t)0x00300000)
+#define RTC_ALRMAR_HT_0 ((uint32_t)0x00100000)
+#define RTC_ALRMAR_HT_1 ((uint32_t)0x00200000)
+#define RTC_ALRMAR_HU ((uint32_t)0x000F0000)
+#define RTC_ALRMAR_HU_0 ((uint32_t)0x00010000)
+#define RTC_ALRMAR_HU_1 ((uint32_t)0x00020000)
+#define RTC_ALRMAR_HU_2 ((uint32_t)0x00040000)
+#define RTC_ALRMAR_HU_3 ((uint32_t)0x00080000)
+#define RTC_ALRMAR_MSK2 ((uint32_t)0x00008000)
+#define RTC_ALRMAR_MNT ((uint32_t)0x00007000)
+#define RTC_ALRMAR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_ALRMAR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_ALRMAR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_ALRMAR_MNU ((uint32_t)0x00000F00)
+#define RTC_ALRMAR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_ALRMAR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_ALRMAR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_ALRMAR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_ALRMAR_MSK1 ((uint32_t)0x00000080)
+#define RTC_ALRMAR_ST ((uint32_t)0x00000070)
+#define RTC_ALRMAR_ST_0 ((uint32_t)0x00000010)
+#define RTC_ALRMAR_ST_1 ((uint32_t)0x00000020)
+#define RTC_ALRMAR_ST_2 ((uint32_t)0x00000040)
+#define RTC_ALRMAR_SU ((uint32_t)0x0000000F)
+#define RTC_ALRMAR_SU_0 ((uint32_t)0x00000001)
+#define RTC_ALRMAR_SU_1 ((uint32_t)0x00000002)
+#define RTC_ALRMAR_SU_2 ((uint32_t)0x00000004)
+#define RTC_ALRMAR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_WPR register *****************/
+#define RTC_WPR_KEY ((uint32_t)0x000000FF)
+
+/******************** Bits definition for RTC_SSR register *****************/
+#define RTC_SSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_SHIFTR register **************/
+#define RTC_SHIFTR_SUBFS ((uint32_t)0x00007FFF)
+#define RTC_SHIFTR_ADD1S ((uint32_t)0x80000000)
+
+/******************** Bits definition for RTC_TSTR register ****************/
+#define RTC_TSTR_PM ((uint32_t)0x00400000)
+#define RTC_TSTR_HT ((uint32_t)0x00300000)
+#define RTC_TSTR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TSTR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TSTR_HU ((uint32_t)0x000F0000)
+#define RTC_TSTR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TSTR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TSTR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TSTR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TSTR_MNT ((uint32_t)0x00007000)
+#define RTC_TSTR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TSTR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TSTR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TSTR_MNU ((uint32_t)0x00000F00)
+#define RTC_TSTR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TSTR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TSTR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TSTR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TSTR_ST ((uint32_t)0x00000070)
+#define RTC_TSTR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TSTR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TSTR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TSTR_SU ((uint32_t)0x0000000F)
+#define RTC_TSTR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TSTR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TSTR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TSTR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSDR register ****************/
+#define RTC_TSDR_WDU ((uint32_t)0x0000E000)
+#define RTC_TSDR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_TSDR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_TSDR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_TSDR_MT ((uint32_t)0x00001000)
+#define RTC_TSDR_MU ((uint32_t)0x00000F00)
+#define RTC_TSDR_MU_0 ((uint32_t)0x00000100)
+#define RTC_TSDR_MU_1 ((uint32_t)0x00000200)
+#define RTC_TSDR_MU_2 ((uint32_t)0x00000400)
+#define RTC_TSDR_MU_3 ((uint32_t)0x00000800)
+#define RTC_TSDR_DT ((uint32_t)0x00000030)
+#define RTC_TSDR_DT_0 ((uint32_t)0x00000010)
+#define RTC_TSDR_DT_1 ((uint32_t)0x00000020)
+#define RTC_TSDR_DU ((uint32_t)0x0000000F)
+#define RTC_TSDR_DU_0 ((uint32_t)0x00000001)
+#define RTC_TSDR_DU_1 ((uint32_t)0x00000002)
+#define RTC_TSDR_DU_2 ((uint32_t)0x00000004)
+#define RTC_TSDR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSSSR register ***************/
+#define RTC_TSSSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_CALR register ****************/
+#define RTC_CALR_CALP ((uint32_t)0x00008000)
+#define RTC_CALR_CALW8 ((uint32_t)0x00004000)
+#define RTC_CALR_CALW16 ((uint32_t)0x00002000)
+#define RTC_CALR_CALM ((uint32_t)0x000001FF)
+#define RTC_CALR_CALM_0 ((uint32_t)0x00000001)
+#define RTC_CALR_CALM_1 ((uint32_t)0x00000002)
+#define RTC_CALR_CALM_2 ((uint32_t)0x00000004)
+#define RTC_CALR_CALM_3 ((uint32_t)0x00000008)
+#define RTC_CALR_CALM_4 ((uint32_t)0x00000010)
+#define RTC_CALR_CALM_5 ((uint32_t)0x00000020)
+#define RTC_CALR_CALM_6 ((uint32_t)0x00000040)
+#define RTC_CALR_CALM_7 ((uint32_t)0x00000080)
+#define RTC_CALR_CALM_8 ((uint32_t)0x00000100)
+
+/******************** Bits definition for RTC_TAFCR register ***************/
+#define RTC_TAFCR_ALARMOUTTYPE ((uint32_t)0x00040000)
+#define RTC_TAFCR_TAMPPUDIS ((uint32_t)0x00008000)
+#define RTC_TAFCR_TAMPPRCH ((uint32_t)0x00006000)
+#define RTC_TAFCR_TAMPPRCH_0 ((uint32_t)0x00002000)
+#define RTC_TAFCR_TAMPPRCH_1 ((uint32_t)0x00004000)
+#define RTC_TAFCR_TAMPFLT ((uint32_t)0x00001800)
+#define RTC_TAFCR_TAMPFLT_0 ((uint32_t)0x00000800)
+#define RTC_TAFCR_TAMPFLT_1 ((uint32_t)0x00001000)
+#define RTC_TAFCR_TAMPFREQ ((uint32_t)0x00000700)
+#define RTC_TAFCR_TAMPFREQ_0 ((uint32_t)0x00000100)
+#define RTC_TAFCR_TAMPFREQ_1 ((uint32_t)0x00000200)
+#define RTC_TAFCR_TAMPFREQ_2 ((uint32_t)0x00000400)
+#define RTC_TAFCR_TAMPTS ((uint32_t)0x00000080)
+#define RTC_TAFCR_TAMP2TRG ((uint32_t)0x00000010)
+#define RTC_TAFCR_TAMP2E ((uint32_t)0x00000008)
+#define RTC_TAFCR_TAMPIE ((uint32_t)0x00000004)
+#define RTC_TAFCR_TAMP1TRG ((uint32_t)0x00000002)
+#define RTC_TAFCR_TAMP1E ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_ALRMASSR register ************/
+#define RTC_ALRMASSR_MASKSS ((uint32_t)0x0F000000)
+#define RTC_ALRMASSR_MASKSS_0 ((uint32_t)0x01000000)
+#define RTC_ALRMASSR_MASKSS_1 ((uint32_t)0x02000000)
+#define RTC_ALRMASSR_MASKSS_2 ((uint32_t)0x04000000)
+#define RTC_ALRMASSR_MASKSS_3 ((uint32_t)0x08000000)
+#define RTC_ALRMASSR_SS ((uint32_t)0x00007FFF)
+
+/*****************************************************************************/
+/* */
+/* Serial Peripheral Interface (SPI) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for SPI_CR1 register *******************/
+#define SPI_CR1_CPHA ((uint32_t)0x00000001) /*!< Clock Phase */
+#define SPI_CR1_CPOL ((uint32_t)0x00000002) /*!< Clock Polarity */
+#define SPI_CR1_MSTR ((uint32_t)0x00000004) /*!< Master Selection */
+#define SPI_CR1_BR ((uint32_t)0x00000038) /*!< BR[2:0] bits (Baud Rate Control) */
+#define SPI_CR1_BR_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define SPI_CR1_BR_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define SPI_CR1_BR_2 ((uint32_t)0x00000020) /*!< Bit 2 */
+#define SPI_CR1_SPE ((uint32_t)0x00000040) /*!< SPI Enable */
+#define SPI_CR1_LSBFIRST ((uint32_t)0x00000080) /*!< Frame Format */
+#define SPI_CR1_SSI ((uint32_t)0x00000100) /*!< Internal slave select */
+#define SPI_CR1_SSM ((uint32_t)0x00000200) /*!< Software slave management */
+#define SPI_CR1_RXONLY ((uint32_t)0x00000400) /*!< Receive only */
+#define SPI_CR1_CRCL ((uint32_t)0x00000800) /*!< CRC Length */
+#define SPI_CR1_CRCNEXT ((uint32_t)0x00001000) /*!< Transmit CRC next */
+#define SPI_CR1_CRCEN ((uint32_t)0x00002000) /*!< Hardware CRC calculation enable */
+#define SPI_CR1_BIDIOE ((uint32_t)0x00004000) /*!< Output enable in bidirectional mode */
+#define SPI_CR1_BIDIMODE ((uint32_t)0x00008000) /*!< Bidirectional data mode enable */
+
+/******************* Bit definition for SPI_CR2 register *******************/
+#define SPI_CR2_RXDMAEN ((uint32_t)0x00000001) /*!< Rx Buffer DMA Enable */
+#define SPI_CR2_TXDMAEN ((uint32_t)0x00000002) /*!< Tx Buffer DMA Enable */
+#define SPI_CR2_SSOE ((uint32_t)0x00000004) /*!< SS Output Enable */
+#define SPI_CR2_NSSP ((uint32_t)0x00000008) /*!< NSS pulse management Enable */
+#define SPI_CR2_FRF ((uint32_t)0x00000010) /*!< Frame Format Enable */
+#define SPI_CR2_ERRIE ((uint32_t)0x00000020) /*!< Error Interrupt Enable */
+#define SPI_CR2_RXNEIE ((uint32_t)0x00000040) /*!< RX buffer Not Empty Interrupt Enable */
+#define SPI_CR2_TXEIE ((uint32_t)0x00000080) /*!< Tx buffer Empty Interrupt Enable */
+#define SPI_CR2_DS ((uint32_t)0x00000F00) /*!< DS[3:0] Data Size */
+#define SPI_CR2_DS_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define SPI_CR2_DS_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define SPI_CR2_DS_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define SPI_CR2_DS_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+#define SPI_CR2_FRXTH ((uint32_t)0x00001000) /*!< FIFO reception Threshold */
+#define SPI_CR2_LDMARX ((uint32_t)0x00002000) /*!< Last DMA transfer for reception */
+#define SPI_CR2_LDMATX ((uint32_t)0x00004000) /*!< Last DMA transfer for transmission */
+
+/******************** Bit definition for SPI_SR register *******************/
+#define SPI_SR_RXNE ((uint32_t)0x00000001) /*!< Receive buffer Not Empty */
+#define SPI_SR_TXE ((uint32_t)0x00000002) /*!< Transmit buffer Empty */
+#define SPI_SR_CHSIDE ((uint32_t)0x00000004) /*!< Channel side */
+#define SPI_SR_UDR ((uint32_t)0x00000008) /*!< Underrun flag */
+#define SPI_SR_CRCERR ((uint32_t)0x00000010) /*!< CRC Error flag */
+#define SPI_SR_MODF ((uint32_t)0x00000020) /*!< Mode fault */
+#define SPI_SR_OVR ((uint32_t)0x00000040) /*!< Overrun flag */
+#define SPI_SR_BSY ((uint32_t)0x00000080) /*!< Busy flag */
+#define SPI_SR_FRE ((uint32_t)0x00000100) /*!< TI frame format error */
+#define SPI_SR_FRLVL ((uint32_t)0x00000600) /*!< FIFO Reception Level */
+#define SPI_SR_FRLVL_0 ((uint32_t)0x00000200) /*!< Bit 0 */
+#define SPI_SR_FRLVL_1 ((uint32_t)0x00000400) /*!< Bit 1 */
+#define SPI_SR_FTLVL ((uint32_t)0x00001800) /*!< FIFO Transmission Level */
+#define SPI_SR_FTLVL_0 ((uint32_t)0x00000800) /*!< Bit 0 */
+#define SPI_SR_FTLVL_1 ((uint32_t)0x00001000) /*!< Bit 1 */
+
+/******************** Bit definition for SPI_DR register *******************/
+#define SPI_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data Register */
+
+/******************* Bit definition for SPI_CRCPR register *****************/
+#define SPI_CRCPR_CRCPOLY ((uint32_t)0xFFFFFFFF) /*!< CRC polynomial register */
+
+/****************** Bit definition for SPI_RXCRCR register *****************/
+#define SPI_RXCRCR_RXCRC ((uint32_t)0xFFFFFFFF) /*!< Rx CRC Register */
+
+/****************** Bit definition for SPI_TXCRCR register *****************/
+#define SPI_TXCRCR_TXCRC ((uint32_t)0xFFFFFFFF) /*!< Tx CRC Register */
+
+/****************** Bit definition for SPI_I2SCFGR register ****************/
+#define SPI_I2SCFGR_I2SMOD ((uint32_t)0x00000800) /*!< Keep for compatibility */
+
+/*****************************************************************************/
+/* */
+/* System Configuration (SYSCFG) */
+/* */
+/*****************************************************************************/
+/***************** Bit definition for SYSCFG_CFGR1 register ****************/
+#define SYSCFG_CFGR1_MEM_MODE ((uint32_t)0x00000003) /*!< SYSCFG_Memory Remap Config */
+#define SYSCFG_CFGR1_MEM_MODE_0 ((uint32_t)0x00000001) /*!< SYSCFG_Memory Remap Config Bit 0 */
+#define SYSCFG_CFGR1_MEM_MODE_1 ((uint32_t)0x00000002) /*!< SYSCFG_Memory Remap Config Bit 1 */
+
+#define SYSCFG_CFGR1_I2C_FMP_PB6 ((uint32_t)0x00010000) /*!< I2C PB6 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB7 ((uint32_t)0x00020000) /*!< I2C PB7 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB8 ((uint32_t)0x00040000) /*!< I2C PB8 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB9 ((uint32_t)0x00080000) /*!< I2C PB9 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_I2C1 ((uint32_t)0x00100000) /*!< Enable Fast Mode Plus on PB10, PB11, PF6 and PF7 */
+#define SYSCFG_CFGR1_I2C_FMP_PA9 ((uint32_t)0x00400000) /*!< Enable Fast Mode Plus on PA9 */
+#define SYSCFG_CFGR1_I2C_FMP_PA10 ((uint32_t)0x00800000) /*!< Enable Fast Mode Plus on PA10 */
+
+/***************** Bit definition for SYSCFG_EXTICR1 register **************/
+#define SYSCFG_EXTICR1_EXTI0 ((uint16_t)0x000F) /*!< EXTI 0 configuration */
+#define SYSCFG_EXTICR1_EXTI1 ((uint16_t)0x00F0) /*!< EXTI 1 configuration */
+#define SYSCFG_EXTICR1_EXTI2 ((uint16_t)0x0F00) /*!< EXTI 2 configuration */
+#define SYSCFG_EXTICR1_EXTI3 ((uint16_t)0xF000) /*!< EXTI 3 configuration */
+
+/**
+ * @brief EXTI0 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI0_PA ((uint16_t)0x0000) /*!< PA[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PB ((uint16_t)0x0001) /*!< PB[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PC ((uint16_t)0x0002) /*!< PC[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PD ((uint16_t)0x0003) /*!< PD[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PE ((uint16_t)0x0004) /*!< PE[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PF ((uint16_t)0x0005) /*!< PF[0] pin */
+
+/**
+ * @brief EXTI1 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI1_PA ((uint16_t)0x0000) /*!< PA[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PB ((uint16_t)0x0010) /*!< PB[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PC ((uint16_t)0x0020) /*!< PC[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PD ((uint16_t)0x0030) /*!< PD[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PE ((uint16_t)0x0040) /*!< PE[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PF ((uint16_t)0x0050) /*!< PF[1] pin */
+
+/**
+ * @brief EXTI2 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI2_PA ((uint16_t)0x0000) /*!< PA[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PB ((uint16_t)0x0100) /*!< PB[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PC ((uint16_t)0x0200) /*!< PC[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PD ((uint16_t)0x0300) /*!< PD[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PE ((uint16_t)0x0400) /*!< PE[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PF ((uint16_t)0x0500) /*!< PF[2] pin */
+
+/**
+ * @brief EXTI3 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI3_PA ((uint16_t)0x0000) /*!< PA[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PB ((uint16_t)0x1000) /*!< PB[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PC ((uint16_t)0x2000) /*!< PC[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PD ((uint16_t)0x3000) /*!< PD[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PE ((uint16_t)0x4000) /*!< PE[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PF ((uint16_t)0x5000) /*!< PF[3] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR2 register **************/
+#define SYSCFG_EXTICR2_EXTI4 ((uint16_t)0x000F) /*!< EXTI 4 configuration */
+#define SYSCFG_EXTICR2_EXTI5 ((uint16_t)0x00F0) /*!< EXTI 5 configuration */
+#define SYSCFG_EXTICR2_EXTI6 ((uint16_t)0x0F00) /*!< EXTI 6 configuration */
+#define SYSCFG_EXTICR2_EXTI7 ((uint16_t)0xF000) /*!< EXTI 7 configuration */
+
+/**
+ * @brief EXTI4 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI4_PA ((uint16_t)0x0000) /*!< PA[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PB ((uint16_t)0x0001) /*!< PB[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PC ((uint16_t)0x0002) /*!< PC[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PD ((uint16_t)0x0003) /*!< PD[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PE ((uint16_t)0x0004) /*!< PE[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PF ((uint16_t)0x0005) /*!< PF[4] pin */
+
+/**
+ * @brief EXTI5 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI5_PA ((uint16_t)0x0000) /*!< PA[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PB ((uint16_t)0x0010) /*!< PB[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PC ((uint16_t)0x0020) /*!< PC[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PD ((uint16_t)0x0030) /*!< PD[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PE ((uint16_t)0x0040) /*!< PE[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PF ((uint16_t)0x0050) /*!< PF[5] pin */
+
+/**
+ * @brief EXTI6 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI6_PA ((uint16_t)0x0000) /*!< PA[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PB ((uint16_t)0x0100) /*!< PB[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PC ((uint16_t)0x0200) /*!< PC[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PD ((uint16_t)0x0300) /*!< PD[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PE ((uint16_t)0x0400) /*!< PE[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PF ((uint16_t)0x0500) /*!< PF[6] pin */
+
+/**
+ * @brief EXTI7 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI7_PA ((uint16_t)0x0000) /*!< PA[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PB ((uint16_t)0x1000) /*!< PB[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PC ((uint16_t)0x2000) /*!< PC[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PD ((uint16_t)0x3000) /*!< PD[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PE ((uint16_t)0x4000) /*!< PE[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PF ((uint16_t)0x5000) /*!< PF[7] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR3 register **************/
+#define SYSCFG_EXTICR3_EXTI8 ((uint16_t)0x000F) /*!< EXTI 8 configuration */
+#define SYSCFG_EXTICR3_EXTI9 ((uint16_t)0x00F0) /*!< EXTI 9 configuration */
+#define SYSCFG_EXTICR3_EXTI10 ((uint16_t)0x0F00) /*!< EXTI 10 configuration */
+#define SYSCFG_EXTICR3_EXTI11 ((uint16_t)0xF000) /*!< EXTI 11 configuration */
+
+/**
+ * @brief EXTI8 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI8_PA ((uint16_t)0x0000) /*!< PA[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PB ((uint16_t)0x0001) /*!< PB[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PC ((uint16_t)0x0002) /*!< PC[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PD ((uint16_t)0x0003) /*!< PD[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PE ((uint16_t)0x0004) /*!< PE[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PF ((uint16_t)0x0005) /*!< PF[8] pin */
+
+/**
+ * @brief EXTI9 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI9_PA ((uint16_t)0x0000) /*!< PA[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PB ((uint16_t)0x0010) /*!< PB[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PC ((uint16_t)0x0020) /*!< PC[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PD ((uint16_t)0x0030) /*!< PD[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PE ((uint16_t)0x0040) /*!< PE[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PF ((uint16_t)0x0050) /*!< PF[9] pin */
+
+/**
+ * @brief EXTI10 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI10_PA ((uint16_t)0x0000) /*!< PA[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PB ((uint16_t)0x0100) /*!< PB[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PC ((uint16_t)0x0200) /*!< PC[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PD ((uint16_t)0x0300) /*!< PD[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PE ((uint16_t)0x0400) /*!< PE[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PF ((uint16_t)0x0500) /*!< PF[10] pin */
+
+/**
+ * @brief EXTI11 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI11_PA ((uint16_t)0x0000) /*!< PA[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PB ((uint16_t)0x1000) /*!< PB[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PC ((uint16_t)0x2000) /*!< PC[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PD ((uint16_t)0x3000) /*!< PD[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PE ((uint16_t)0x4000) /*!< PE[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PF ((uint16_t)0x5000) /*!< PF[11] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR4 register **************/
+#define SYSCFG_EXTICR4_EXTI12 ((uint16_t)0x000F) /*!< EXTI 12 configuration */
+#define SYSCFG_EXTICR4_EXTI13 ((uint16_t)0x00F0) /*!< EXTI 13 configuration */
+#define SYSCFG_EXTICR4_EXTI14 ((uint16_t)0x0F00) /*!< EXTI 14 configuration */
+#define SYSCFG_EXTICR4_EXTI15 ((uint16_t)0xF000) /*!< EXTI 15 configuration */
+
+/**
+ * @brief EXTI12 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI12_PA ((uint16_t)0x0000) /*!< PA[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PB ((uint16_t)0x0001) /*!< PB[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PC ((uint16_t)0x0002) /*!< PC[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PD ((uint16_t)0x0003) /*!< PD[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PE ((uint16_t)0x0004) /*!< PE[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PF ((uint16_t)0x0005) /*!< PF[12] pin */
+
+/**
+ * @brief EXTI13 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI13_PA ((uint16_t)0x0000) /*!< PA[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PB ((uint16_t)0x0010) /*!< PB[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PC ((uint16_t)0x0020) /*!< PC[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PD ((uint16_t)0x0030) /*!< PD[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PE ((uint16_t)0x0040) /*!< PE[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PF ((uint16_t)0x0050) /*!< PF[13] pin */
+
+/**
+ * @brief EXTI14 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI14_PA ((uint16_t)0x0000) /*!< PA[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PB ((uint16_t)0x0100) /*!< PB[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PC ((uint16_t)0x0200) /*!< PC[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PD ((uint16_t)0x0300) /*!< PD[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PE ((uint16_t)0x0400) /*!< PE[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PF ((uint16_t)0x0500) /*!< PF[14] pin */
+
+/**
+ * @brief EXTI15 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI15_PA ((uint16_t)0x0000) /*!< PA[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PB ((uint16_t)0x1000) /*!< PB[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PC ((uint16_t)0x2000) /*!< PC[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PD ((uint16_t)0x3000) /*!< PD[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PE ((uint16_t)0x4000) /*!< PE[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PF ((uint16_t)0x5000) /*!< PF[15] pin */
+
+/***************** Bit definition for SYSCFG_CFGR2 register ****************/
+#define SYSCFG_CFGR2_LOCKUP_LOCK ((uint32_t)0x00000001) /*!< Enables and locks the LOCKUP (Hardfault) output of CortexM0 with Break Input of TIMER1 */
+#define SYSCFG_CFGR2_SRAM_PARITY_LOCK ((uint32_t)0x00000002) /*!< Enables and locks the SRAM_PARITY error signal with Break Input of TIMER1 */
+#define SYSCFG_CFGR2_SRAM_PEF ((uint32_t)0x00000100) /*!< SRAM Parity error flag */
+#define SYSCFG_CFGR2_SRAM_PE SYSCFG_CFGR2_SRAM_PEF /*!< SRAM Parity error flag (define maintained for legacy purpose) */
+
+/*****************************************************************************/
+/* */
+/* Timers (TIM) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for TIM_CR1 register *******************/
+#define TIM_CR1_CEN ((uint32_t)0x00000001) /*!<Counter enable */
+#define TIM_CR1_UDIS ((uint32_t)0x00000002) /*!<Update disable */
+#define TIM_CR1_URS ((uint32_t)0x00000004) /*!<Update request source */
+#define TIM_CR1_OPM ((uint32_t)0x00000008) /*!<One pulse mode */
+#define TIM_CR1_DIR ((uint32_t)0x00000010) /*!<Direction */
+
+#define TIM_CR1_CMS ((uint32_t)0x00000060) /*!<CMS[1:0] bits (Center-aligned mode selection) */
+#define TIM_CR1_CMS_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define TIM_CR1_CMS_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+
+#define TIM_CR1_ARPE ((uint32_t)0x00000080) /*!<Auto-reload preload enable */
+
+#define TIM_CR1_CKD ((uint32_t)0x00000300) /*!<CKD[1:0] bits (clock division) */
+#define TIM_CR1_CKD_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CR1_CKD_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+/******************* Bit definition for TIM_CR2 register *******************/
+#define TIM_CR2_CCPC ((uint32_t)0x00000001) /*!<Capture/Compare Preloaded Control */
+#define TIM_CR2_CCUS ((uint32_t)0x00000004) /*!<Capture/Compare Control Update Selection */
+#define TIM_CR2_CCDS ((uint32_t)0x00000008) /*!<Capture/Compare DMA Selection */
+
+#define TIM_CR2_MMS ((uint32_t)0x00000070) /*!<MMS[2:0] bits (Master Mode Selection) */
+#define TIM_CR2_MMS_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CR2_MMS_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CR2_MMS_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CR2_TI1S ((uint32_t)0x00000080) /*!<TI1 Selection */
+#define TIM_CR2_OIS1 ((uint32_t)0x00000100) /*!<Output Idle state 1 (OC1 output) */
+#define TIM_CR2_OIS1N ((uint32_t)0x00000200) /*!<Output Idle state 1 (OC1N output) */
+#define TIM_CR2_OIS2 ((uint32_t)0x00000400) /*!<Output Idle state 2 (OC2 output) */
+#define TIM_CR2_OIS2N ((uint32_t)0x00000800) /*!<Output Idle state 2 (OC2N output) */
+#define TIM_CR2_OIS3 ((uint32_t)0x00001000) /*!<Output Idle state 3 (OC3 output) */
+#define TIM_CR2_OIS3N ((uint32_t)0x00002000) /*!<Output Idle state 3 (OC3N output) */
+#define TIM_CR2_OIS4 ((uint32_t)0x00004000) /*!<Output Idle state 4 (OC4 output) */
+
+/******************* Bit definition for TIM_SMCR register ******************/
+#define TIM_SMCR_SMS ((uint32_t)0x00000007) /*!<SMS[2:0] bits (Slave mode selection) */
+#define TIM_SMCR_SMS_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_SMCR_SMS_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_SMCR_SMS_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+
+#define TIM_SMCR_OCCS ((uint32_t)0x00000008) /*!< OCREF clear selection */
+
+#define TIM_SMCR_TS ((uint32_t)0x00000070) /*!<TS[2:0] bits (Trigger selection) */
+#define TIM_SMCR_TS_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_SMCR_TS_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_SMCR_TS_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_SMCR_MSM ((uint32_t)0x00000080) /*!<Master/slave mode */
+
+#define TIM_SMCR_ETF ((uint32_t)0x00000F00) /*!<ETF[3:0] bits (External trigger filter) */
+#define TIM_SMCR_ETF_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_SMCR_ETF_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define TIM_SMCR_ETF_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define TIM_SMCR_ETF_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+
+#define TIM_SMCR_ETPS ((uint32_t)0x00003000) /*!<ETPS[1:0] bits (External trigger prescaler) */
+#define TIM_SMCR_ETPS_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_SMCR_ETPS_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+
+#define TIM_SMCR_ECE ((uint32_t)0x00004000) /*!<External clock enable */
+#define TIM_SMCR_ETP ((uint32_t)0x00008000) /*!<External trigger polarity */
+
+/******************* Bit definition for TIM_DIER register ******************/
+#define TIM_DIER_UIE ((uint32_t)0x00000001) /*!<Update interrupt enable */
+#define TIM_DIER_CC1IE ((uint32_t)0x00000002) /*!<Capture/Compare 1 interrupt enable */
+#define TIM_DIER_CC2IE ((uint32_t)0x00000004) /*!<Capture/Compare 2 interrupt enable */
+#define TIM_DIER_CC3IE ((uint32_t)0x00000008) /*!<Capture/Compare 3 interrupt enable */
+#define TIM_DIER_CC4IE ((uint32_t)0x00000010) /*!<Capture/Compare 4 interrupt enable */
+#define TIM_DIER_COMIE ((uint32_t)0x00000020) /*!<COM interrupt enable */
+#define TIM_DIER_TIE ((uint32_t)0x00000040) /*!<Trigger interrupt enable */
+#define TIM_DIER_BIE ((uint32_t)0x00000080) /*!<Break interrupt enable */
+#define TIM_DIER_UDE ((uint32_t)0x00000100) /*!<Update DMA request enable */
+#define TIM_DIER_CC1DE ((uint32_t)0x00000200) /*!<Capture/Compare 1 DMA request enable */
+#define TIM_DIER_CC2DE ((uint32_t)0x00000400) /*!<Capture/Compare 2 DMA request enable */
+#define TIM_DIER_CC3DE ((uint32_t)0x00000800) /*!<Capture/Compare 3 DMA request enable */
+#define TIM_DIER_CC4DE ((uint32_t)0x00001000) /*!<Capture/Compare 4 DMA request enable */
+#define TIM_DIER_COMDE ((uint32_t)0x00002000) /*!<COM DMA request enable */
+#define TIM_DIER_TDE ((uint32_t)0x00004000) /*!<Trigger DMA request enable */
+
+/******************** Bit definition for TIM_SR register *******************/
+#define TIM_SR_UIF ((uint32_t)0x00000001) /*!<Update interrupt Flag */
+#define TIM_SR_CC1IF ((uint32_t)0x00000002) /*!<Capture/Compare 1 interrupt Flag */
+#define TIM_SR_CC2IF ((uint32_t)0x00000004) /*!<Capture/Compare 2 interrupt Flag */
+#define TIM_SR_CC3IF ((uint32_t)0x00000008) /*!<Capture/Compare 3 interrupt Flag */
+#define TIM_SR_CC4IF ((uint32_t)0x00000010) /*!<Capture/Compare 4 interrupt Flag */
+#define TIM_SR_COMIF ((uint32_t)0x00000020) /*!<COM interrupt Flag */
+#define TIM_SR_TIF ((uint32_t)0x00000040) /*!<Trigger interrupt Flag */
+#define TIM_SR_BIF ((uint32_t)0x00000080) /*!<Break interrupt Flag */
+#define TIM_SR_CC1OF ((uint32_t)0x00000200) /*!<Capture/Compare 1 Overcapture Flag */
+#define TIM_SR_CC2OF ((uint32_t)0x00000400) /*!<Capture/Compare 2 Overcapture Flag */
+#define TIM_SR_CC3OF ((uint32_t)0x00000800) /*!<Capture/Compare 3 Overcapture Flag */
+#define TIM_SR_CC4OF ((uint32_t)0x00001000) /*!<Capture/Compare 4 Overcapture Flag */
+
+/******************* Bit definition for TIM_EGR register *******************/
+#define TIM_EGR_UG ((uint32_t)0x00000001) /*!<Update Generation */
+#define TIM_EGR_CC1G ((uint32_t)0x00000002) /*!<Capture/Compare 1 Generation */
+#define TIM_EGR_CC2G ((uint32_t)0x00000004) /*!<Capture/Compare 2 Generation */
+#define TIM_EGR_CC3G ((uint32_t)0x00000008) /*!<Capture/Compare 3 Generation */
+#define TIM_EGR_CC4G ((uint32_t)0x00000010) /*!<Capture/Compare 4 Generation */
+#define TIM_EGR_COMG ((uint32_t)0x00000020) /*!<Capture/Compare Control Update Generation */
+#define TIM_EGR_TG ((uint32_t)0x00000040) /*!<Trigger Generation */
+#define TIM_EGR_BG ((uint32_t)0x00000080) /*!<Break Generation */
+
+/****************** Bit definition for TIM_CCMR1 register ******************/
+#define TIM_CCMR1_CC1S ((uint32_t)0x00000003) /*!<CC1S[1:0] bits (Capture/Compare 1 Selection) */
+#define TIM_CCMR1_CC1S_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_CCMR1_CC1S_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC1FE ((uint32_t)0x00000004) /*!<Output Compare 1 Fast enable */
+#define TIM_CCMR1_OC1PE ((uint32_t)0x00000008) /*!<Output Compare 1 Preload enable */
+
+#define TIM_CCMR1_OC1M ((uint32_t)0x00000070) /*!<OC1M[2:0] bits (Output Compare 1 Mode) */
+#define TIM_CCMR1_OC1M_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR1_OC1M_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR1_OC1M_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CCMR1_OC1CE ((uint32_t)0x00000080) /*!<Output Compare 1Clear Enable */
+
+#define TIM_CCMR1_CC2S ((uint32_t)0x00000300) /*!<CC2S[1:0] bits (Capture/Compare 2 Selection) */
+#define TIM_CCMR1_CC2S_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CCMR1_CC2S_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC2FE ((uint32_t)0x00000400) /*!<Output Compare 2 Fast enable */
+#define TIM_CCMR1_OC2PE ((uint32_t)0x00000800) /*!<Output Compare 2 Preload enable */
+
+#define TIM_CCMR1_OC2M ((uint32_t)0x00007000) /*!<OC2M[2:0] bits (Output Compare 2 Mode) */
+#define TIM_CCMR1_OC2M_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR1_OC2M_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR1_OC2M_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+
+#define TIM_CCMR1_OC2CE ((uint32_t)0x00008000) /*!<Output Compare 2 Clear Enable */
+
+/*---------------------------------------------------------------------------*/
+
+#define TIM_CCMR1_IC1PSC ((uint32_t)0x0000000C) /*!<IC1PSC[1:0] bits (Input Capture 1 Prescaler) */
+#define TIM_CCMR1_IC1PSC_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define TIM_CCMR1_IC1PSC_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC1F ((uint32_t)0x000000F0) /*!<IC1F[3:0] bits (Input Capture 1 Filter) */
+#define TIM_CCMR1_IC1F_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR1_IC1F_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR1_IC1F_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define TIM_CCMR1_IC1F_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define TIM_CCMR1_IC2PSC ((uint32_t)0x00000C00) /*!<IC2PSC[1:0] bits (Input Capture 2 Prescaler) */
+#define TIM_CCMR1_IC2PSC_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define TIM_CCMR1_IC2PSC_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC2F ((uint32_t)0x0000F000) /*!<IC2F[3:0] bits (Input Capture 2 Filter) */
+#define TIM_CCMR1_IC2F_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR1_IC2F_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR1_IC2F_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define TIM_CCMR1_IC2F_3 ((uint32_t)0x00008000) /*!<Bit 3 */
+
+/****************** Bit definition for TIM_CCMR2 register ******************/
+#define TIM_CCMR2_CC3S ((uint32_t)0x00000003) /*!<CC3S[1:0] bits (Capture/Compare 3 Selection) */
+#define TIM_CCMR2_CC3S_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_CCMR2_CC3S_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC3FE ((uint32_t)0x00000004) /*!<Output Compare 3 Fast enable */
+#define TIM_CCMR2_OC3PE ((uint32_t)0x00000008) /*!<Output Compare 3 Preload enable */
+
+#define TIM_CCMR2_OC3M ((uint32_t)0x00000070) /*!<OC3M[2:0] bits (Output Compare 3 Mode) */
+#define TIM_CCMR2_OC3M_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR2_OC3M_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR2_OC3M_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CCMR2_OC3CE ((uint32_t)0x00000080) /*!<Output Compare 3 Clear Enable */
+
+#define TIM_CCMR2_CC4S ((uint32_t)0x00000300) /*!<CC4S[1:0] bits (Capture/Compare 4 Selection) */
+#define TIM_CCMR2_CC4S_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CCMR2_CC4S_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC4FE ((uint32_t)0x00000400) /*!<Output Compare 4 Fast enable */
+#define TIM_CCMR2_OC4PE ((uint32_t)0x00000800) /*!<Output Compare 4 Preload enable */
+
+#define TIM_CCMR2_OC4M ((uint32_t)0x00007000) /*!<OC4M[2:0] bits (Output Compare 4 Mode) */
+#define TIM_CCMR2_OC4M_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR2_OC4M_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR2_OC4M_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+
+#define TIM_CCMR2_OC4CE ((uint32_t)0x00008000) /*!<Output Compare 4 Clear Enable */
+
+/*---------------------------------------------------------------------------*/
+
+#define TIM_CCMR2_IC3PSC ((uint32_t)0x0000000C) /*!<IC3PSC[1:0] bits (Input Capture 3 Prescaler) */
+#define TIM_CCMR2_IC3PSC_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define TIM_CCMR2_IC3PSC_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC3F ((uint32_t)0x000000F0) /*!<IC3F[3:0] bits (Input Capture 3 Filter) */
+#define TIM_CCMR2_IC3F_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR2_IC3F_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR2_IC3F_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define TIM_CCMR2_IC3F_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define TIM_CCMR2_IC4PSC ((uint32_t)0x00000C00) /*!<IC4PSC[1:0] bits (Input Capture 4 Prescaler) */
+#define TIM_CCMR2_IC4PSC_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define TIM_CCMR2_IC4PSC_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC4F ((uint32_t)0x0000F000) /*!<IC4F[3:0] bits (Input Capture 4 Filter) */
+#define TIM_CCMR2_IC4F_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR2_IC4F_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR2_IC4F_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define TIM_CCMR2_IC4F_3 ((uint32_t)0x00008000) /*!<Bit 3 */
+
+/******************* Bit definition for TIM_CCER register ******************/
+#define TIM_CCER_CC1E ((uint32_t)0x00000001) /*!<Capture/Compare 1 output enable */
+#define TIM_CCER_CC1P ((uint32_t)0x00000002) /*!<Capture/Compare 1 output Polarity */
+#define TIM_CCER_CC1NE ((uint32_t)0x00000004) /*!<Capture/Compare 1 Complementary output enable */
+#define TIM_CCER_CC1NP ((uint32_t)0x00000008) /*!<Capture/Compare 1 Complementary output Polarity */
+#define TIM_CCER_CC2E ((uint32_t)0x00000010) /*!<Capture/Compare 2 output enable */
+#define TIM_CCER_CC2P ((uint32_t)0x00000020) /*!<Capture/Compare 2 output Polarity */
+#define TIM_CCER_CC2NE ((uint32_t)0x00000040) /*!<Capture/Compare 2 Complementary output enable */
+#define TIM_CCER_CC2NP ((uint32_t)0x00000080) /*!<Capture/Compare 2 Complementary output Polarity */
+#define TIM_CCER_CC3E ((uint32_t)0x00000100) /*!<Capture/Compare 3 output enable */
+#define TIM_CCER_CC3P ((uint32_t)0x00000200) /*!<Capture/Compare 3 output Polarity */
+#define TIM_CCER_CC3NE ((uint32_t)0x00000400) /*!<Capture/Compare 3 Complementary output enable */
+#define TIM_CCER_CC3NP ((uint32_t)0x00000800) /*!<Capture/Compare 3 Complementary output Polarity */
+#define TIM_CCER_CC4E ((uint32_t)0x00001000) /*!<Capture/Compare 4 output enable */
+#define TIM_CCER_CC4P ((uint32_t)0x00002000) /*!<Capture/Compare 4 output Polarity */
+#define TIM_CCER_CC4NP ((uint32_t)0x00008000) /*!<Capture/Compare 4 Complementary output Polarity */
+
+/******************* Bit definition for TIM_CNT register *******************/
+#define TIM_CNT_CNT ((uint32_t)0xFFFFFFFF) /*!<Counter Value */
+
+/******************* Bit definition for TIM_PSC register *******************/
+#define TIM_PSC_PSC ((uint32_t)0x0000FFFF) /*!<Prescaler Value */
+
+/******************* Bit definition for TIM_ARR register *******************/
+#define TIM_ARR_ARR ((uint32_t)0xFFFFFFFF) /*!<actual auto-reload Value */
+
+/******************* Bit definition for TIM_RCR register *******************/
+#define TIM_RCR_REP ((uint32_t)0x000000FF) /*!<Repetition Counter Value */
+
+/******************* Bit definition for TIM_CCR1 register ******************/
+#define TIM_CCR1_CCR1 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 1 Value */
+
+/******************* Bit definition for TIM_CCR2 register ******************/
+#define TIM_CCR2_CCR2 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 2 Value */
+
+/******************* Bit definition for TIM_CCR3 register ******************/
+#define TIM_CCR3_CCR3 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 3 Value */
+
+/******************* Bit definition for TIM_CCR4 register ******************/
+#define TIM_CCR4_CCR4 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 4 Value */
+
+/******************* Bit definition for TIM_BDTR register ******************/
+#define TIM_BDTR_DTG ((uint32_t)0x000000FF) /*!<DTG[0:7] bits (Dead-Time Generator set-up) */
+#define TIM_BDTR_DTG_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_BDTR_DTG_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_BDTR_DTG_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define TIM_BDTR_DTG_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define TIM_BDTR_DTG_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define TIM_BDTR_DTG_5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define TIM_BDTR_DTG_6 ((uint32_t)0x00000040) /*!<Bit 6 */
+#define TIM_BDTR_DTG_7 ((uint32_t)0x00000080) /*!<Bit 7 */
+
+#define TIM_BDTR_LOCK ((uint32_t)0x00000300) /*!<LOCK[1:0] bits (Lock Configuration) */
+#define TIM_BDTR_LOCK_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_BDTR_LOCK_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_BDTR_OSSI ((uint32_t)0x00000400) /*!<Off-State Selection for Idle mode */
+#define TIM_BDTR_OSSR ((uint32_t)0x00000800) /*!<Off-State Selection for Run mode */
+#define TIM_BDTR_BKE ((uint32_t)0x00001000) /*!<Break enable */
+#define TIM_BDTR_BKP ((uint32_t)0x00002000) /*!<Break Polarity */
+#define TIM_BDTR_AOE ((uint32_t)0x00004000) /*!<Automatic Output enable */
+#define TIM_BDTR_MOE ((uint32_t)0x00008000) /*!<Main Output enable */
+
+/******************* Bit definition for TIM_DCR register *******************/
+#define TIM_DCR_DBA ((uint32_t)0x0000001F) /*!<DBA[4:0] bits (DMA Base Address) */
+#define TIM_DCR_DBA_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_DCR_DBA_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_DCR_DBA_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define TIM_DCR_DBA_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define TIM_DCR_DBA_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+
+#define TIM_DCR_DBL ((uint32_t)0x00001F00) /*!<DBL[4:0] bits (DMA Burst Length) */
+#define TIM_DCR_DBL_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_DCR_DBL_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define TIM_DCR_DBL_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define TIM_DCR_DBL_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define TIM_DCR_DBL_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+
+/******************* Bit definition for TIM_DMAR register ******************/
+#define TIM_DMAR_DMAB ((uint32_t)0x0000FFFF) /*!<DMA register for burst accesses */
+
+/******************* Bit definition for TIM14_OR register ********************/
+#define TIM14_OR_TI1_RMP ((uint32_t)0x00000003) /*!<TI1_RMP[1:0] bits (TIM14 Input 4 remap) */
+#define TIM14_OR_TI1_RMP_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM14_OR_TI1_RMP_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+/******************************************************************************/
+/* */
+/* Universal Synchronous Asynchronous Receiver Transmitter (USART) */
+/* */
+/******************************************************************************/
+/****************** Bit definition for USART_CR1 register *******************/
+#define USART_CR1_UE ((uint32_t)0x00000001) /*!< USART Enable */
+#define USART_CR1_RE ((uint32_t)0x00000004) /*!< Receiver Enable */
+#define USART_CR1_TE ((uint32_t)0x00000008) /*!< Transmitter Enable */
+#define USART_CR1_IDLEIE ((uint32_t)0x00000010) /*!< IDLE Interrupt Enable */
+#define USART_CR1_RXNEIE ((uint32_t)0x00000020) /*!< RXNE Interrupt Enable */
+#define USART_CR1_TCIE ((uint32_t)0x00000040) /*!< Transmission Complete Interrupt Enable */
+#define USART_CR1_TXEIE ((uint32_t)0x00000080) /*!< TXE Interrupt Enable */
+#define USART_CR1_PEIE ((uint32_t)0x00000100) /*!< PE Interrupt Enable */
+#define USART_CR1_PS ((uint32_t)0x00000200) /*!< Parity Selection */
+#define USART_CR1_PCE ((uint32_t)0x00000400) /*!< Parity Control Enable */
+#define USART_CR1_WAKE ((uint32_t)0x00000800) /*!< Receiver Wakeup method */
+#define USART_CR1_M0 ((uint32_t)0x00001000) /*!< Word length bit 0 */
+#define USART_CR1_MME ((uint32_t)0x00002000) /*!< Mute Mode Enable */
+#define USART_CR1_CMIE ((uint32_t)0x00004000) /*!< Character match interrupt enable */
+#define USART_CR1_OVER8 ((uint32_t)0x00008000) /*!< Oversampling by 8-bit or 16-bit mode */
+#define USART_CR1_DEDT ((uint32_t)0x001F0000) /*!< DEDT[4:0] bits (Driver Enable Deassertion Time) */
+#define USART_CR1_DEDT_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define USART_CR1_DEDT_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define USART_CR1_DEDT_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define USART_CR1_DEDT_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+#define USART_CR1_DEDT_4 ((uint32_t)0x00100000) /*!< Bit 4 */
+#define USART_CR1_DEAT ((uint32_t)0x03E00000) /*!< DEAT[4:0] bits (Driver Enable Assertion Time) */
+#define USART_CR1_DEAT_0 ((uint32_t)0x00200000) /*!< Bit 0 */
+#define USART_CR1_DEAT_1 ((uint32_t)0x00400000) /*!< Bit 1 */
+#define USART_CR1_DEAT_2 ((uint32_t)0x00800000) /*!< Bit 2 */
+#define USART_CR1_DEAT_3 ((uint32_t)0x01000000) /*!< Bit 3 */
+#define USART_CR1_DEAT_4 ((uint32_t)0x02000000) /*!< Bit 4 */
+#define USART_CR1_RTOIE ((uint32_t)0x04000000) /*!< Receive Time Out interrupt enable */
+#define USART_CR1_EOBIE ((uint32_t)0x08000000) /*!< End of Block interrupt enable */
+#define USART_CR1_M1 ((uint32_t)0x10000000) /*!< Word length bit 1 */
+#define USART_CR1_M ((uint32_t)0x10001000) /*!< [M1:M0] Word length */
+
+/****************** Bit definition for USART_CR2 register *******************/
+#define USART_CR2_ADDM7 ((uint32_t)0x00000010) /*!< 7-bit or 4-bit Address Detection */
+#define USART_CR2_LBCL ((uint32_t)0x00000100) /*!< Last Bit Clock pulse */
+#define USART_CR2_CPHA ((uint32_t)0x00000200) /*!< Clock Phase */
+#define USART_CR2_CPOL ((uint32_t)0x00000400) /*!< Clock Polarity */
+#define USART_CR2_CLKEN ((uint32_t)0x00000800) /*!< Clock Enable */
+#define USART_CR2_STOP ((uint32_t)0x00003000) /*!< STOP[1:0] bits (STOP bits) */
+#define USART_CR2_STOP_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define USART_CR2_STOP_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+#define USART_CR2_LINEN ((uint32_t)0x00004000) /*!< Keep for compatibility */
+#define USART_CR2_SWAP ((uint32_t)0x00008000) /*!< SWAP TX/RX pins */
+#define USART_CR2_RXINV ((uint32_t)0x00010000) /*!< RX pin active level inversion */
+#define USART_CR2_TXINV ((uint32_t)0x00020000) /*!< TX pin active level inversion */
+#define USART_CR2_DATAINV ((uint32_t)0x00040000) /*!< Binary data inversion */
+#define USART_CR2_MSBFIRST ((uint32_t)0x00080000) /*!< Most Significant Bit First */
+#define USART_CR2_ABREN ((uint32_t)0x00100000) /*!< Auto Baud-Rate Enable*/
+#define USART_CR2_ABRMODE ((uint32_t)0x00600000) /*!< ABRMOD[1:0] bits (Auto Baud-Rate Mode) */
+#define USART_CR2_ABRMODE_0 ((uint32_t)0x00200000) /*!< Bit 0 */
+#define USART_CR2_ABRMODE_1 ((uint32_t)0x00400000) /*!< Bit 1 */
+#define USART_CR2_RTOEN ((uint32_t)0x00800000) /*!< Receiver Time-Out enable */
+#define USART_CR2_ADD ((uint32_t)0xFF000000) /*!< Address of the USART node */
+
+/****************** Bit definition for USART_CR3 register *******************/
+#define USART_CR3_EIE ((uint32_t)0x00000001) /*!< Error Interrupt Enable */
+#define USART_CR3_IREN ((uint32_t)0x00000002) /*!< Keep for compatibility */
+#define USART_CR3_HDSEL ((uint32_t)0x00000008) /*!< Half-Duplex Selection */
+#define USART_CR3_SCEN ((uint32_t)0x00000020) /*!< Keep for compatibility */
+#define USART_CR3_DMAR ((uint32_t)0x00000040) /*!< DMA Enable Receiver */
+#define USART_CR3_DMAT ((uint32_t)0x00000080) /*!< DMA Enable Transmitter */
+#define USART_CR3_RTSE ((uint32_t)0x00000100) /*!< RTS Enable */
+#define USART_CR3_CTSE ((uint32_t)0x00000200) /*!< CTS Enable */
+#define USART_CR3_CTSIE ((uint32_t)0x00000400) /*!< CTS Interrupt Enable */
+#define USART_CR3_ONEBIT ((uint32_t)0x00000800) /*!< One sample bit method enable */
+#define USART_CR3_OVRDIS ((uint32_t)0x00001000) /*!< Overrun Disable */
+#define USART_CR3_DDRE ((uint32_t)0x00002000) /*!< DMA Disable on Reception Error */
+#define USART_CR3_DEM ((uint32_t)0x00004000) /*!< Driver Enable Mode */
+#define USART_CR3_DEP ((uint32_t)0x00008000) /*!< Driver Enable Polarity Selection */
+
+/****************** Bit definition for USART_BRR register *******************/
+#define USART_BRR_DIV_FRACTION ((uint32_t)0x0000000F) /*!< Fraction of USARTDIV */
+#define USART_BRR_DIV_MANTISSA ((uint32_t)0x0000FFF0) /*!< Mantissa of USARTDIV */
+
+/****************** Bit definition for USART_GTPR register ******************/
+#define USART_GTPR_PSC ((uint32_t)0x000000FF) /*!< PSC[7:0] bits (Prescaler value) */
+#define USART_GTPR_GT ((uint32_t)0x0000FF00) /*!< GT[7:0] bits (Guard time value) */
+
+
+/******************* Bit definition for USART_RTOR register *****************/
+#define USART_RTOR_RTO ((uint32_t)0x00FFFFFF) /*!< Receiver Time Out Value */
+#define USART_RTOR_BLEN ((uint32_t)0xFF000000) /*!< Block Length */
+
+/******************* Bit definition for USART_RQR register ******************/
+#define USART_RQR_ABRRQ ((uint32_t)0x00000001) /*!< Auto-Baud Rate Request */
+#define USART_RQR_SBKRQ ((uint32_t)0x00000002) /*!< Send Break Request */
+#define USART_RQR_MMRQ ((uint32_t)0x00000004) /*!< Mute Mode Request */
+#define USART_RQR_RXFRQ ((uint32_t)0x00000008) /*!< Receive Data flush Request */
+
+/******************* Bit definition for USART_ISR register ******************/
+#define USART_ISR_PE ((uint32_t)0x00000001) /*!< Parity Error */
+#define USART_ISR_FE ((uint32_t)0x00000002) /*!< Framing Error */
+#define USART_ISR_NE ((uint32_t)0x00000004) /*!< Noise detected Flag */
+#define USART_ISR_ORE ((uint32_t)0x00000008) /*!< OverRun Error */
+#define USART_ISR_IDLE ((uint32_t)0x00000010) /*!< IDLE line detected */
+#define USART_ISR_RXNE ((uint32_t)0x00000020) /*!< Read Data Register Not Empty */
+#define USART_ISR_TC ((uint32_t)0x00000040) /*!< Transmission Complete */
+#define USART_ISR_TXE ((uint32_t)0x00000080) /*!< Transmit Data Register Empty */
+#define USART_ISR_CTSIF ((uint32_t)0x00000200) /*!< CTS interrupt flag */
+#define USART_ISR_CTS ((uint32_t)0x00000400) /*!< CTS flag */
+#define USART_ISR_RTOF ((uint32_t)0x00000800) /*!< Receiver Time Out */
+#define USART_ISR_EOBF ((uint32_t)0x00001000) /*!< End Of Block Flag */
+#define USART_ISR_ABRE ((uint32_t)0x00004000) /*!< Auto-Baud Rate Error */
+#define USART_ISR_ABRF ((uint32_t)0x00008000) /*!< Auto-Baud Rate Flag */
+#define USART_ISR_BUSY ((uint32_t)0x00010000) /*!< Busy Flag */
+#define USART_ISR_CMF ((uint32_t)0x00020000) /*!< Character Match Flag */
+#define USART_ISR_SBKF ((uint32_t)0x00040000) /*!< Send Break Flag */
+#define USART_ISR_TEACK ((uint32_t)0x00200000) /*!< Transmit Enable Acknowledge Flag */
+#define USART_ISR_REACK ((uint32_t)0x00400000) /*!< Receive Enable Acknowledge Flag */
+
+/******************* Bit definition for USART_ICR register ******************/
+#define USART_ICR_PECF ((uint32_t)0x00000001) /*!< Parity Error Clear Flag */
+#define USART_ICR_FECF ((uint32_t)0x00000002) /*!< Framing Error Clear Flag */
+#define USART_ICR_NCF ((uint32_t)0x00000004) /*!< Noise detected Clear Flag */
+#define USART_ICR_ORECF ((uint32_t)0x00000008) /*!< OverRun Error Clear Flag */
+#define USART_ICR_IDLECF ((uint32_t)0x00000010) /*!< IDLE line detected Clear Flag */
+#define USART_ICR_TCCF ((uint32_t)0x00000040) /*!< Transmission Complete Clear Flag */
+#define USART_ICR_CTSCF ((uint32_t)0x00000200) /*!< CTS Interrupt Clear Flag */
+#define USART_ICR_RTOCF ((uint32_t)0x00000800) /*!< Receiver Time Out Clear Flag */
+#define USART_ICR_CMCF ((uint32_t)0x00020000) /*!< Character Match Clear Flag */
+
+/******************* Bit definition for USART_RDR register ******************/
+#define USART_RDR_RDR ((uint16_t)0x01FF) /*!< RDR[8:0] bits (Receive Data value) */
+
+/******************* Bit definition for USART_TDR register ******************/
+#define USART_TDR_TDR ((uint16_t)0x01FF) /*!< TDR[8:0] bits (Transmit Data value) */
+
+/******************************************************************************/
+/* */
+/* Window WATCHDOG (WWDG) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for WWDG_CR register ********************/
+#define WWDG_CR_T ((uint32_t)0x7F) /*!<T[6:0] bits (7-Bit counter (MSB to LSB)) */
+#define WWDG_CR_T0 ((uint32_t)0x01) /*!<Bit 0 */
+#define WWDG_CR_T1 ((uint32_t)0x02) /*!<Bit 1 */
+#define WWDG_CR_T2 ((uint32_t)0x04) /*!<Bit 2 */
+#define WWDG_CR_T3 ((uint32_t)0x08) /*!<Bit 3 */
+#define WWDG_CR_T4 ((uint32_t)0x10) /*!<Bit 4 */
+#define WWDG_CR_T5 ((uint32_t)0x20) /*!<Bit 5 */
+#define WWDG_CR_T6 ((uint32_t)0x40) /*!<Bit 6 */
+
+#define WWDG_CR_WDGA ((uint32_t)0x80) /*!<Activation bit */
+
+/******************* Bit definition for WWDG_CFR register *******************/
+#define WWDG_CFR_W ((uint32_t)0x007F) /*!<W[6:0] bits (7-bit window value) */
+#define WWDG_CFR_W0 ((uint32_t)0x0001) /*!<Bit 0 */
+#define WWDG_CFR_W1 ((uint32_t)0x0002) /*!<Bit 1 */
+#define WWDG_CFR_W2 ((uint32_t)0x0004) /*!<Bit 2 */
+#define WWDG_CFR_W3 ((uint32_t)0x0008) /*!<Bit 3 */
+#define WWDG_CFR_W4 ((uint32_t)0x0010) /*!<Bit 4 */
+#define WWDG_CFR_W5 ((uint32_t)0x0020) /*!<Bit 5 */
+#define WWDG_CFR_W6 ((uint32_t)0x0040) /*!<Bit 6 */
+
+#define WWDG_CFR_WDGTB ((uint32_t)0x0180) /*!<WDGTB[1:0] bits (Timer Base) */
+#define WWDG_CFR_WDGTB0 ((uint32_t)0x0080) /*!<Bit 0 */
+#define WWDG_CFR_WDGTB1 ((uint32_t)0x0100) /*!<Bit 1 */
+
+#define WWDG_CFR_EWI ((uint32_t)0x0200) /*!<Early Wakeup Interrupt */
+
+/******************* Bit definition for WWDG_SR register ********************/
+#define WWDG_SR_EWIF ((uint32_t)0x01) /*!<Early Wakeup Interrupt Flag */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+
+/** @addtogroup Exported_macro
+ * @{
+ */
+
+/****************************** ADC Instances *********************************/
+#define IS_ADC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == ADC1)
+
+#define IS_ADC_COMMON_INSTANCE(INSTANCE) ((INSTANCE) == ADC)
+
+/****************************** CRC Instances *********************************/
+#define IS_CRC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CRC)
+
+/******************************* DMA Instances ******************************/
+#define IS_DMA_ALL_INSTANCE(INSTANCE) (((INSTANCE) == DMA1_Channel1) || \
+ ((INSTANCE) == DMA1_Channel2) || \
+ ((INSTANCE) == DMA1_Channel3) || \
+ ((INSTANCE) == DMA1_Channel4) || \
+ ((INSTANCE) == DMA1_Channel5))
+
+/****************************** GPIO Instances ********************************/
+#define IS_GPIO_ALL_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB) || \
+ ((INSTANCE) == GPIOC) || \
+ ((INSTANCE) == GPIOD) || \
+ ((INSTANCE) == GPIOE) || \
+ ((INSTANCE) == GPIOF))
+
+#define IS_GPIO_AF_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB) || \
+ ((INSTANCE) == GPIOC) || \
+ ((INSTANCE) == GPIOD) || \
+ ((INSTANCE) == GPIOE) || \
+ ((INSTANCE) == GPIOF))
+
+/****************************** GPIO Lock Instances ****************************/
+#define IS_GPIO_LOCK_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB))
+
+/****************************** I2C Instances *********************************/
+#define IS_I2C_ALL_INSTANCE(INSTANCE) (((INSTANCE) == I2C1) || \
+ ((INSTANCE) == I2C2))
+
+/****************************** IWDG Instances ********************************/
+#define IS_IWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == IWDG)
+
+/****************************** RTC Instances *********************************/
+#define IS_RTC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == RTC)
+
+/****************************** SMBUS Instances *********************************/
+#define IS_SMBUS_ALL_INSTANCE(INSTANCE) ((INSTANCE) == I2C1)
+
+/****************************** SPI Instances *********************************/
+#define IS_SPI_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
+ ((INSTANCE) == SPI2))
+
+/****************************** TIM Instances *********************************/
+#define IS_TIM_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM6) || \
+ ((INSTANCE) == TIM7) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CC1_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CC2_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_CC3_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CC4_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_TIX_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_ENCODER_INTERFACE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_HALL_INTERFACE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1))
+
+#define IS_TIM_XOR_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_MASTER_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM6) || \
+ ((INSTANCE) == TIM7) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_SLAVE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_32B_COUNTER_INSTANCE(INSTANCE) (0)
+
+#define IS_TIM_DMABURST_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_BREAK_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CCX_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM3) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM14) && \
+ (((CHANNEL) == TIM_CHANNEL_1))) \
+ || \
+ (((INSTANCE) == TIM15) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))) \
+ || \
+ (((INSTANCE) == TIM16) && \
+ (((CHANNEL) == TIM_CHANNEL_1))) \
+ || \
+ (((INSTANCE) == TIM17) && \
+ (((CHANNEL) == TIM_CHANNEL_1))))
+
+#define IS_TIM_CCXN_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3))) \
+ || \
+ (((INSTANCE) == TIM15) && \
+ ((CHANNEL) == TIM_CHANNEL_1)) \
+ || \
+ (((INSTANCE) == TIM16) && \
+ ((CHANNEL) == TIM_CHANNEL_1)) \
+ || \
+ (((INSTANCE) == TIM17) && \
+ ((CHANNEL) == TIM_CHANNEL_1)))
+
+#define IS_TIM_COUNTER_MODE_SELECT_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_REPETITION_COUNTER_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CLOCK_DIVISION_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_DMA_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM6) || \
+ ((INSTANCE) == TIM7) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_DMA_CC_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_COMMUTATION_EVENT_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_REMAP_INSTANCE(INSTANCE)\
+ ((INSTANCE) == TIM14)
+
+/******************** USART Instances : Synchronous mode **********************/
+#define IS_USART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3) || \
+ ((INSTANCE) == USART4) || \
+ ((INSTANCE) == USART5) || \
+ ((INSTANCE) == USART6))
+
+/******************** USART Instances : auto Baud rate detection **************/
+#define IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3))
+
+/******************** UART Instances : Asynchronous mode **********************/
+#define IS_UART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3) || \
+ ((INSTANCE) == USART4) || \
+ ((INSTANCE) == USART5) || \
+ ((INSTANCE) == USART6))
+
+/******************** UART Instances : Half-Duplex mode **********************/
+#define IS_UART_HALFDUPLEX_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3) || \
+ ((INSTANCE) == USART4) || \
+ ((INSTANCE) == USART5) || \
+ ((INSTANCE) == USART6))
+
+/****************** UART Instances : Hardware Flow control ********************/
+#define IS_UART_HWFLOW_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3) || \
+ ((INSTANCE) == USART4) || \
+ ((INSTANCE) == USART5) || \
+ ((INSTANCE) == USART6))
+
+/****************** UART Instances : Auto Baud Rate detection ********************/
+#define IS_UART_AUTOBAUDRATE_DETECTION_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3))
+
+/****************** UART Instances : Driver enable detection ********************/
+#define IS_UART_DRIVER_ENABLE_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3) || \
+ ((INSTANCE) == USART4) || \
+ ((INSTANCE) == USART5) || \
+ ((INSTANCE) == USART6))
+
+/****************************** WWDG Instances ********************************/
+#define IS_WWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == WWDG)
+
+/**
+ * @}
+ */
+
+
+/******************************************************************************/
+/* For a painless codes migration between the STM32F0xx device product */
+/* lines, the aliases defined below are put in place to overcome the */
+/* differences in the interrupt handlers and IRQn definitions. */
+/* No need to update developed interrupt code when moving across */
+/* product lines within the same STM32F0 Family */
+/******************************************************************************/
+
+/* Aliases for __IRQn */
+#define RCC_CRS_IRQn RCC_IRQn
+#define DMA1_Ch1_IRQn DMA1_Channel1_IRQn
+#define DMA1_Ch2_3_DMA2_Ch1_2_IRQn DMA1_Channel2_3_IRQn
+#define DMA1_Ch4_7_DMA2_Ch3_5_IRQn DMA1_Channel4_5_IRQn
+#define DMA1_Channel4_5_6_7_IRQn DMA1_Channel4_5_IRQn
+#define ADC1_COMP_IRQn ADC1_IRQn
+#define TIM6_DAC_IRQn TIM6_IRQn
+#define USART3_8_IRQn USART3_6_IRQn
+#define USART3_4_IRQn USART3_6_IRQn
+
+/* Aliases for __IRQHandler */
+#define RCC_CRS_IRQHandler RCC_IRQHandler
+#define DMA1_Ch1_IRQHandler DMA1_Channel1_IRQHandler
+#define DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler DMA1_Channel2_3_IRQHandler
+#define DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler DMA1_Channel4_5_IRQHandler
+#define DMA1_Channel4_5_6_7_IRQHandler DMA1_Channel4_5_IRQHandler
+#define ADC1_COMP_IRQHandler ADC1_IRQHandler
+#define TIM6_DAC_IRQHandler TIM6_IRQHandler
+#define USART3_8_IRQHandler USART3_6_IRQHandler
+#define USART3_4_IRQHandler USART3_6_IRQHandler
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F030xC_H */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/include/devices/stm32f031x6.h b/f0/include/devices/stm32f031x6.h
new file mode 100755
index 0000000000000000000000000000000000000000..27a2ebdbb72c48da929368f95adca7845a4772c4
--- /dev/null
+++ b/f0/include/devices/stm32f031x6.h
@@ -0,0 +1,3253 @@
+/**
+ ******************************************************************************
+ * @file stm32f031x6.h
+ * @author MCD Application Team
+ * @version V2.2.1
+ * @date 09-January-2015
+ * @brief CMSIS STM32F031x4/STM32F031x6 devices Peripheral Access Layer Header File.
+ *
+ * This file contains:
+ * - Data structures and the address mapping for all peripherals
+ * - Peripheral's registers declarations and bits definition
+ * - Macros to access peripheral’s registers hardware
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS_Device
+ * @{
+ */
+
+/** @addtogroup stm32f031x6
+ * @{
+ */
+
+#ifndef __STM32F031x6_H
+#define __STM32F031x6_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+
+/**
+ * @brief Configuration of the Cortex-M0 Processor and Core Peripherals
+ */
+#define __CM0_REV 0 /*!< Core Revision r0p0 */
+#define __MPU_PRESENT 0 /*!< STM32F0xx do not provide MPU */
+#define __NVIC_PRIO_BITS 2 /*!< STM32F0xx uses 2 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F031x4/STM32F031x6 device Interrupt Number Definition
+ */
+typedef enum
+{
+/****** Cortex-M0 Processor Exceptions Numbers **************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */
+ SVC_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */
+
+/****** STM32F031x4/STM32F031x6 specific Interrupt Numbers **************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ PVD_IRQn = 1, /*!< PVD Interrupts through EXTI Lines 16 */
+ RTC_IRQn = 2, /*!< RTC Interrupt through EXTI Lines 17, 19 and 20 */
+ FLASH_IRQn = 3, /*!< FLASH global Interrupt */
+ RCC_IRQn = 4, /*!< RCC global Interrupt */
+ EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupts */
+ EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupts */
+ EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupts */
+ DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */
+ DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupts */
+ DMA1_Channel4_5_IRQn = 11, /*!< DMA1 Channel 4 and Channel 5 Interrupts */
+ ADC1_IRQn = 12, /*!< ADC1 global Interrupt */
+ TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupts */
+ TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 15, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 16, /*!< TIM3 global Interrupt */
+ TIM14_IRQn = 19, /*!< TIM14 global Interrupt */
+ TIM16_IRQn = 21, /*!< TIM16 global Interrupt */
+ TIM17_IRQn = 22, /*!< TIM17 global Interrupt */
+ I2C1_IRQn = 23, /*!< I2C1 Event Interrupt & EXTI Line23 Interrupt (I2C1 wakeup) */
+ SPI1_IRQn = 25, /*!< SPI1 global Interrupt */
+ USART1_IRQn = 27 /*!< USART1 global Interrupt & EXTI Line25 Interrupt (USART1 wakeup) */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm0.h" /* Cortex-M0 processor and core peripherals */
+#include "system_stm32f0xx.h" /* STM32F0xx System Header */
+#include <stdint.h>
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< ADC Interrupt and Status register, Address offset:0x00 */
+ __IO uint32_t IER; /*!< ADC Interrupt Enable register, Address offset:0x04 */
+ __IO uint32_t CR; /*!< ADC Control register, Address offset:0x08 */
+ __IO uint32_t CFGR1; /*!< ADC Configuration register 1, Address offset:0x0C */
+ __IO uint32_t CFGR2; /*!< ADC Configuration register 2, Address offset:0x10 */
+ __IO uint32_t SMPR; /*!< ADC Sampling time register, Address offset:0x14 */
+ uint32_t RESERVED1; /*!< Reserved, 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, 0x1C */
+ __IO uint32_t TR; /*!< ADC watchdog threshold register, Address offset:0x20 */
+ uint32_t RESERVED3; /*!< Reserved, 0x24 */
+ __IO uint32_t CHSELR; /*!< ADC channel selection register, Address offset:0x28 */
+ uint32_t RESERVED4[5]; /*!< Reserved, 0x2C */
+ __IO uint32_t DR; /*!< ADC data register, Address offset:0x40 */
+}ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CCR;
+}ADC_Common_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+ uint32_t RESERVED2; /*!< Reserved, 0x0C */
+ __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */
+ __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */
+}CRC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< DMA channel x configuration register */
+ __IO uint32_t CNDTR; /*!< DMA channel x number of data register */
+ __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */
+ __IO uint32_t CMAR; /*!< DMA channel x memory address register */
+}DMA_Channel_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */
+ __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */
+}DMA_TypeDef;
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!<EXTI Interrupt mask register, Address offset: 0x00 */
+ __IO uint32_t EMR; /*!<EXTI Event mask register, Address offset: 0x04 */
+ __IO uint32_t RTSR; /*!<EXTI Rising trigger selection register , Address offset: 0x08 */
+ __IO uint32_t FTSR; /*!<EXTI Falling trigger selection register, Address offset: 0x0C */
+ __IO uint32_t SWIER; /*!<EXTI Software interrupt event register, Address offset: 0x10 */
+ __IO uint32_t PR; /*!<EXTI Pending register, Address offset: 0x14 */
+}EXTI_TypeDef;
+
+/**
+ * @brief FLASH Registers
+ */
+typedef struct
+{
+ __IO uint32_t ACR; /*!<FLASH access control register, Address offset: 0x00 */
+ __IO uint32_t KEYR; /*!<FLASH key register, Address offset: 0x04 */
+ __IO uint32_t OPTKEYR; /*!<FLASH OPT key register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!<FLASH status register, Address offset: 0x0C */
+ __IO uint32_t CR; /*!<FLASH control register, Address offset: 0x10 */
+ __IO uint32_t AR; /*!<FLASH address register, Address offset: 0x14 */
+ __IO uint32_t RESERVED; /*!< Reserved, 0x18 */
+ __IO uint32_t OBR; /*!<FLASH option bytes register, Address offset: 0x1C */
+ __IO uint32_t WRPR; /*!<FLASH option bytes register, Address offset: 0x20 */
+}FLASH_TypeDef;
+
+
+/**
+ * @brief Option Bytes Registers
+ */
+typedef struct
+{
+ __IO uint16_t RDP; /*!< FLASH option byte Read protection, Address offset: 0x00 */
+ __IO uint16_t USER; /*!< FLASH option byte user options, Address offset: 0x02 */
+ __IO uint16_t DATA0; /*!< User data byte 0 (stored in FLASH_OBR[23:16]), Address offset: 0x04 */
+ __IO uint16_t DATA1; /*!< User data byte 1 (stored in FLASH_OBR[31:24]), Address offset: 0x06 */
+ __IO uint16_t WRP0; /*!< FLASH option byte write protection 0, Address offset: 0x08 */
+ __IO uint16_t WRP1; /*!< FLASH option byte write protection 1, Address offset: 0x0A */
+ __IO uint16_t WRP2; /*!< FLASH option byte write protection 2, Address offset: 0x0C */
+ __IO uint16_t WRP3; /*!< FLASH option byte write protection 3, Address offset: 0x0E */
+}OB_TypeDef;
+
+/**
+ * @brief General Purpose I/O
+ */
+
+typedef struct
+{
+ __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */
+ __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */
+ __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */
+ __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */
+ __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */
+ __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */
+ __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x1A */
+ __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */
+ __IO uint32_t AFR[2]; /*!< GPIO alternate function low register, Address offset: 0x20-0x24 */
+ __IO uint32_t BRR; /*!< GPIO bit reset register, Address offset: 0x28 */
+}GPIO_TypeDef;
+
+/**
+ * @brief SysTem Configuration
+ */
+
+typedef struct
+{
+ __IO uint32_t CFGR1; /*!< SYSCFG configuration register 1, Address offset: 0x00 */
+ uint32_t RESERVED; /*!< Reserved, 0x04 */
+ __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration register, Address offset: 0x14-0x08 */
+ __IO uint32_t CFGR2; /*!< SYSCFG configuration register 2, Address offset: 0x18 */
+}SYSCFG_TypeDef;
+
+/**
+ * @brief Inter-integrated Circuit Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */
+ __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */
+ __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */
+ __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */
+ __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */
+ __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */
+ __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */
+ __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */
+ __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */
+ __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */
+}I2C_TypeDef;
+
+/**
+ * @brief Independent WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */
+ __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */
+ __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */
+ __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */
+}IWDG_TypeDef;
+
+/**
+ * @brief Power Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< PWR power control register, Address offset: 0x00 */
+ __IO uint32_t CSR; /*!< PWR power control/status register, Address offset: 0x04 */
+}PWR_TypeDef;
+
+/**
+ * @brief Reset and Clock Control
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */
+ __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x04 */
+ __IO uint32_t CIR; /*!< RCC clock interrupt register, Address offset: 0x08 */
+ __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x0C */
+ __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x10 */
+ __IO uint32_t AHBENR; /*!< RCC AHB peripheral clock register, Address offset: 0x14 */
+ __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x18 */
+ __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x1C */
+ __IO uint32_t BDCR; /*!< RCC Backup domain control register, Address offset: 0x20 */
+ __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x24 */
+ __IO uint32_t AHBRSTR; /*!< RCC AHB peripheral reset register, Address offset: 0x28 */
+ __IO uint32_t CFGR2; /*!< RCC clock configuration register 2, Address offset: 0x2C */
+ __IO uint32_t CFGR3; /*!< RCC clock configuration register 3, Address offset: 0x30 */
+ __IO uint32_t CR2; /*!< RCC clock control register 2, Address offset: 0x34 */
+}RCC_TypeDef;
+
+/**
+ * @brief Real-Time Clock
+ */
+
+typedef struct
+{
+ __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */
+ __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */
+ uint32_t RESERVED1; /*!< Reserved, Address offset: 0x14 */
+ uint32_t RESERVED2; /*!< Reserved, Address offset: 0x18 */
+ __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */
+ uint32_t RESERVED3; /*!< Reserved, Address offset: 0x20 */
+ __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */
+ __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */
+ __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */
+ __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */
+ __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */
+ __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */
+ __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */
+ __IO uint32_t TAFCR; /*!< RTC tamper and alternate function configuration register, Address offset: 0x40 */
+ __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */
+ uint32_t RESERVED4; /*!< Reserved, Address offset: 0x48 */
+ uint32_t RESERVED5; /*!< Reserved, Address offset: 0x4C */
+ __IO uint32_t BKP0R; /*!< RTC backup register 0, Address offset: 0x50 */
+ __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */
+ __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */
+ __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */
+ __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */
+}RTC_TypeDef;
+
+/**
+ * @brief Serial Peripheral Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< SPI Control register 1 (not used in I2S mode), Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */
+ __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */
+ __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */
+ __IO uint32_t RXCRCR; /*!< SPI Rx CRC register (not used in I2S mode), Address offset: 0x14 */
+ __IO uint32_t TXCRCR; /*!< SPI Tx CRC register (not used in I2S mode), Address offset: 0x18 */
+ __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */
+ __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */
+}SPI_TypeDef;
+
+/**
+ * @brief TIM
+ */
+typedef struct
+{
+ __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */
+ __IO uint32_t SMCR; /*!< TIM slave Mode Control register, Address offset: 0x08 */
+ __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */
+ __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */
+ __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */
+ __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */
+ __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */
+ __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */
+ __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */
+ __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */
+ __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */
+ __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */
+ __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */
+ __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */
+ __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */
+ __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */
+ __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */
+ __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */
+ __IO uint32_t DMAR; /*!< TIM DMA address for full transfer register, Address offset: 0x4C */
+ __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */
+}TIM_TypeDef;
+
+
+/**
+ * @brief Universal Synchronous Asynchronous Receiver Transmitter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */
+ __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */
+ __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */
+ __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */
+ __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */
+ __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */
+ __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */
+ __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */
+ __IO uint16_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */
+ uint16_t RESERVED1; /*!< Reserved, 0x26 */
+ __IO uint16_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */
+ uint16_t RESERVED2; /*!< Reserved, 0x2A */
+}USART_TypeDef;
+
+/**
+ * @brief Window WATCHDOG
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */
+ __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */
+}WWDG_TypeDef;
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_memory_map
+ * @{
+ */
+
+#define FLASH_BASE ((uint32_t)0x08000000) /*!< FLASH base address in the alias region */
+#define SRAM_BASE ((uint32_t)0x20000000) /*!< SRAM base address in the alias region */
+#define PERIPH_BASE ((uint32_t)0x40000000) /*!< Peripheral base address in the alias region */
+
+/*!< Peripheral memory map */
+#define APBPERIPH_BASE PERIPH_BASE
+#define AHBPERIPH_BASE (PERIPH_BASE + 0x00020000)
+#define AHB2PERIPH_BASE (PERIPH_BASE + 0x08000000)
+
+#define TIM2_BASE (APBPERIPH_BASE + 0x00000000)
+#define TIM3_BASE (APBPERIPH_BASE + 0x00000400)
+#define TIM14_BASE (APBPERIPH_BASE + 0x00002000)
+#define RTC_BASE (APBPERIPH_BASE + 0x00002800)
+#define WWDG_BASE (APBPERIPH_BASE + 0x00002C00)
+#define IWDG_BASE (APBPERIPH_BASE + 0x00003000)
+#define I2C1_BASE (APBPERIPH_BASE + 0x00005400)
+#define PWR_BASE (APBPERIPH_BASE + 0x00007000)
+#define SYSCFG_BASE (APBPERIPH_BASE + 0x00010000)
+#define EXTI_BASE (APBPERIPH_BASE + 0x00010400)
+#define ADC1_BASE (APBPERIPH_BASE + 0x00012400)
+#define ADC_BASE (APBPERIPH_BASE + 0x00012708)
+#define TIM1_BASE (APBPERIPH_BASE + 0x00012C00)
+#define SPI1_BASE (APBPERIPH_BASE + 0x00013000)
+#define USART1_BASE (APBPERIPH_BASE + 0x00013800)
+#define TIM16_BASE (APBPERIPH_BASE + 0x00014400)
+#define TIM17_BASE (APBPERIPH_BASE + 0x00014800)
+#define DBGMCU_BASE (APBPERIPH_BASE + 0x00015800)
+
+#define DMA1_BASE (AHBPERIPH_BASE + 0x00000000)
+#define DMA1_Channel1_BASE (DMA1_BASE + 0x00000008)
+#define DMA1_Channel2_BASE (DMA1_BASE + 0x0000001C)
+#define DMA1_Channel3_BASE (DMA1_BASE + 0x00000030)
+#define DMA1_Channel4_BASE (DMA1_BASE + 0x00000044)
+#define DMA1_Channel5_BASE (DMA1_BASE + 0x00000058)
+
+#define RCC_BASE (AHBPERIPH_BASE + 0x00001000)
+#define FLASH_R_BASE (AHBPERIPH_BASE + 0x00002000) /*!< FLASH registers base address */
+#define OB_BASE ((uint32_t)0x1FFFF800) /*!< FLASH Option Bytes base address */
+#define CRC_BASE (AHBPERIPH_BASE + 0x00003000)
+
+#define GPIOA_BASE (AHB2PERIPH_BASE + 0x00000000)
+#define GPIOB_BASE (AHB2PERIPH_BASE + 0x00000400)
+#define GPIOC_BASE (AHB2PERIPH_BASE + 0x00000800)
+#define GPIOF_BASE (AHB2PERIPH_BASE + 0x00001400)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_declaration
+ * @{
+ */
+
+#define TIM2 ((TIM_TypeDef *) TIM2_BASE)
+#define TIM3 ((TIM_TypeDef *) TIM3_BASE)
+#define TIM14 ((TIM_TypeDef *) TIM14_BASE)
+#define RTC ((RTC_TypeDef *) RTC_BASE)
+#define WWDG ((WWDG_TypeDef *) WWDG_BASE)
+#define IWDG ((IWDG_TypeDef *) IWDG_BASE)
+#define I2C1 ((I2C_TypeDef *) I2C1_BASE)
+#define PWR ((PWR_TypeDef *) PWR_BASE)
+#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE)
+#define EXTI ((EXTI_TypeDef *) EXTI_BASE)
+#define ADC1 ((ADC_TypeDef *) ADC1_BASE)
+#define ADC ((ADC_Common_TypeDef *) ADC_BASE)
+#define TIM1 ((TIM_TypeDef *) TIM1_BASE)
+#define SPI1 ((SPI_TypeDef *) SPI1_BASE)
+#define USART1 ((USART_TypeDef *) USART1_BASE)
+#define TIM16 ((TIM_TypeDef *) TIM16_BASE)
+#define TIM17 ((TIM_TypeDef *) TIM17_BASE)
+#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE)
+#define DMA1 ((DMA_TypeDef *) DMA1_BASE)
+#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE)
+#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE)
+#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE)
+#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE)
+#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE)
+#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE)
+#define OB ((OB_TypeDef *) OB_BASE)
+#define RCC ((RCC_TypeDef *) RCC_BASE)
+#define CRC ((CRC_TypeDef *) CRC_BASE)
+#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE)
+#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE)
+#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE)
+#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_constants
+ * @{
+ */
+
+ /** @addtogroup Peripheral_Registers_Bits_Definition
+ * @{
+ */
+
+/******************************************************************************/
+/* Peripheral Registers Bits Definition */
+/******************************************************************************/
+/******************************************************************************/
+/* */
+/* Analog to Digital Converter (ADC) */
+/* */
+/******************************************************************************/
+/******************** Bits definition for ADC_ISR register ******************/
+#define ADC_ISR_AWD ((uint32_t)0x00000080) /*!< Analog watchdog flag */
+#define ADC_ISR_OVR ((uint32_t)0x00000010) /*!< Overrun flag */
+#define ADC_ISR_EOSEQ ((uint32_t)0x00000008) /*!< End of Sequence flag */
+#define ADC_ISR_EOC ((uint32_t)0x00000004) /*!< End of Conversion */
+#define ADC_ISR_EOSMP ((uint32_t)0x00000002) /*!< End of sampling flag */
+#define ADC_ISR_ADRDY ((uint32_t)0x00000001) /*!< ADC Ready */
+
+/* Old EOSEQ bit definition, maintained for legacy purpose */
+#define ADC_ISR_EOS ADC_ISR_EOSEQ
+
+/******************** Bits definition for ADC_IER register ******************/
+#define ADC_IER_AWDIE ((uint32_t)0x00000080) /*!< Analog Watchdog interrupt enable */
+#define ADC_IER_OVRIE ((uint32_t)0x00000010) /*!< Overrun interrupt enable */
+#define ADC_IER_EOSEQIE ((uint32_t)0x00000008) /*!< End of Sequence of conversion interrupt enable */
+#define ADC_IER_EOCIE ((uint32_t)0x00000004) /*!< End of Conversion interrupt enable */
+#define ADC_IER_EOSMPIE ((uint32_t)0x00000002) /*!< End of sampling interrupt enable */
+#define ADC_IER_ADRDYIE ((uint32_t)0x00000001) /*!< ADC Ready interrupt enable */
+
+/* Old EOSEQIE bit definition, maintained for legacy purpose */
+#define ADC_IER_EOSIE ADC_IER_EOSEQIE
+
+/******************** Bits definition for ADC_CR register *******************/
+#define ADC_CR_ADCAL ((uint32_t)0x80000000) /*!< ADC calibration */
+#define ADC_CR_ADSTP ((uint32_t)0x00000010) /*!< ADC stop of conversion command */
+#define ADC_CR_ADSTART ((uint32_t)0x00000004) /*!< ADC start of conversion */
+#define ADC_CR_ADDIS ((uint32_t)0x00000002) /*!< ADC disable command */
+#define ADC_CR_ADEN ((uint32_t)0x00000001) /*!< ADC enable control */
+
+/******************* Bits definition for ADC_CFGR1 register *****************/
+#define ADC_CFGR1_AWDCH ((uint32_t)0x7C000000) /*!< AWDCH[4:0] bits (Analog watchdog channel select bits) */
+#define ADC_CFGR1_AWDCH_0 ((uint32_t)0x04000000) /*!< Bit 0 */
+#define ADC_CFGR1_AWDCH_1 ((uint32_t)0x08000000) /*!< Bit 1 */
+#define ADC_CFGR1_AWDCH_2 ((uint32_t)0x10000000) /*!< Bit 2 */
+#define ADC_CFGR1_AWDCH_3 ((uint32_t)0x20000000) /*!< Bit 3 */
+#define ADC_CFGR1_AWDCH_4 ((uint32_t)0x40000000) /*!< Bit 4 */
+#define ADC_CFGR1_AWDEN ((uint32_t)0x00800000) /*!< Analog watchdog enable on regular channels */
+#define ADC_CFGR1_AWDSGL ((uint32_t)0x00400000) /*!< Enable the watchdog on a single channel or on all channels */
+#define ADC_CFGR1_DISCEN ((uint32_t)0x00010000) /*!< Discontinuous mode on regular channels */
+#define ADC_CFGR1_AUTOFF ((uint32_t)0x00008000) /*!< ADC auto power off */
+#define ADC_CFGR1_WAIT ((uint32_t)0x00004000) /*!< ADC wait conversion mode */
+#define ADC_CFGR1_CONT ((uint32_t)0x00002000) /*!< Continuous Conversion */
+#define ADC_CFGR1_OVRMOD ((uint32_t)0x00001000) /*!< Overrun mode */
+#define ADC_CFGR1_EXTEN ((uint32_t)0x00000C00) /*!< EXTEN[1:0] bits (External Trigger Conversion mode for regular channels) */
+#define ADC_CFGR1_EXTEN_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define ADC_CFGR1_EXTEN_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define ADC_CFGR1_EXTSEL ((uint32_t)0x000001C0) /*!< EXTSEL[2:0] bits (External Event Select for regular group) */
+#define ADC_CFGR1_EXTSEL_0 ((uint32_t)0x00000040) /*!< Bit 0 */
+#define ADC_CFGR1_EXTSEL_1 ((uint32_t)0x00000080) /*!< Bit 1 */
+#define ADC_CFGR1_EXTSEL_2 ((uint32_t)0x00000100) /*!< Bit 2 */
+#define ADC_CFGR1_ALIGN ((uint32_t)0x00000020) /*!< Data Alignment */
+#define ADC_CFGR1_RES ((uint32_t)0x00000018) /*!< RES[1:0] bits (Resolution) */
+#define ADC_CFGR1_RES_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define ADC_CFGR1_RES_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define ADC_CFGR1_SCANDIR ((uint32_t)0x00000004) /*!< Sequence scan direction */
+#define ADC_CFGR1_DMACFG ((uint32_t)0x00000002) /*!< Direct memory access configuration */
+#define ADC_CFGR1_DMAEN ((uint32_t)0x00000001) /*!< Direct memory access enable */
+
+/* Old WAIT bit definition, maintained for legacy purpose */
+#define ADC_CFGR1_AUTDLY ADC_CFGR1_WAIT
+
+/******************* Bits definition for ADC_CFGR2 register *****************/
+#define ADC_CFGR2_CKMODE ((uint32_t)0xC0000000) /*!< ADC clock mode */
+#define ADC_CFGR2_CKMODE_1 ((uint32_t)0x80000000) /*!< ADC clocked by PCLK div4 */
+#define ADC_CFGR2_CKMODE_0 ((uint32_t)0x40000000) /*!< ADC clocked by PCLK div2 */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_CFGR2_JITOFFDIV4 ADC_CFGR2_CKMODE_1 /*!< ADC clocked by PCLK div4 */
+#define ADC_CFGR2_JITOFFDIV2 ADC_CFGR2_CKMODE_0 /*!< ADC clocked by PCLK div2 */
+
+/****************** Bit definition for ADC_SMPR register ********************/
+#define ADC_SMPR_SMP ((uint32_t)0x00000007) /*!< SMP[2:0] bits (Sampling time selection) */
+#define ADC_SMPR_SMP_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define ADC_SMPR_SMP_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define ADC_SMPR_SMP_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_SMPR1_SMPR ADC_SMPR_SMP /*!< SMP[2:0] bits (Sampling time selection) */
+#define ADC_SMPR1_SMPR_0 ADC_SMPR_SMP_0 /*!< Bit 0 */
+#define ADC_SMPR1_SMPR_1 ADC_SMPR_SMP_1 /*!< Bit 1 */
+#define ADC_SMPR1_SMPR_2 ADC_SMPR_SMP_2 /*!< Bit 2 */
+
+/******************* Bit definition for ADC_TR register ********************/
+#define ADC_TR_HT ((uint32_t)0x0FFF0000) /*!< Analog watchdog high threshold */
+#define ADC_TR_LT ((uint32_t)0x00000FFF) /*!< Analog watchdog low threshold */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_HTR_HT ADC_TR_HT /*!< Analog watchdog high threshold */
+#define ADC_LTR_LT ADC_TR_LT /*!< Analog watchdog low threshold */
+
+/****************** Bit definition for ADC_CHSELR register ******************/
+#define ADC_CHSELR_CHSEL18 ((uint32_t)0x00040000) /*!< Channel 18 selection */
+#define ADC_CHSELR_CHSEL17 ((uint32_t)0x00020000) /*!< Channel 17 selection */
+#define ADC_CHSELR_CHSEL16 ((uint32_t)0x00010000) /*!< Channel 16 selection */
+#define ADC_CHSELR_CHSEL15 ((uint32_t)0x00008000) /*!< Channel 15 selection */
+#define ADC_CHSELR_CHSEL14 ((uint32_t)0x00004000) /*!< Channel 14 selection */
+#define ADC_CHSELR_CHSEL13 ((uint32_t)0x00002000) /*!< Channel 13 selection */
+#define ADC_CHSELR_CHSEL12 ((uint32_t)0x00001000) /*!< Channel 12 selection */
+#define ADC_CHSELR_CHSEL11 ((uint32_t)0x00000800) /*!< Channel 11 selection */
+#define ADC_CHSELR_CHSEL10 ((uint32_t)0x00000400) /*!< Channel 10 selection */
+#define ADC_CHSELR_CHSEL9 ((uint32_t)0x00000200) /*!< Channel 9 selection */
+#define ADC_CHSELR_CHSEL8 ((uint32_t)0x00000100) /*!< Channel 8 selection */
+#define ADC_CHSELR_CHSEL7 ((uint32_t)0x00000080) /*!< Channel 7 selection */
+#define ADC_CHSELR_CHSEL6 ((uint32_t)0x00000040) /*!< Channel 6 selection */
+#define ADC_CHSELR_CHSEL5 ((uint32_t)0x00000020) /*!< Channel 5 selection */
+#define ADC_CHSELR_CHSEL4 ((uint32_t)0x00000010) /*!< Channel 4 selection */
+#define ADC_CHSELR_CHSEL3 ((uint32_t)0x00000008) /*!< Channel 3 selection */
+#define ADC_CHSELR_CHSEL2 ((uint32_t)0x00000004) /*!< Channel 2 selection */
+#define ADC_CHSELR_CHSEL1 ((uint32_t)0x00000002) /*!< Channel 1 selection */
+#define ADC_CHSELR_CHSEL0 ((uint32_t)0x00000001) /*!< Channel 0 selection */
+
+/******************** Bit definition for ADC_DR register ********************/
+#define ADC_DR_DATA ((uint32_t)0x0000FFFF) /*!< Regular data */
+
+/******************* Bit definition for ADC_CCR register ********************/
+#define ADC_CCR_VBATEN ((uint32_t)0x01000000) /*!< Voltage battery enable */
+#define ADC_CCR_TSEN ((uint32_t)0x00800000) /*!< Tempurature sensore enable */
+#define ADC_CCR_VREFEN ((uint32_t)0x00400000) /*!< Vrefint enable */
+
+/******************************************************************************/
+/* */
+/* CRC calculation unit (CRC) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for CRC_DR register *********************/
+#define CRC_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data register bits */
+
+/******************* Bit definition for CRC_IDR register ********************/
+#define CRC_IDR_IDR ((uint8_t)0xFF) /*!< General-purpose 8-bit data register bits */
+
+/******************** Bit definition for CRC_CR register ********************/
+#define CRC_CR_RESET ((uint32_t)0x00000001) /*!< RESET the CRC computation unit bit */
+#define CRC_CR_REV_IN ((uint32_t)0x00000060) /*!< REV_IN Reverse Input Data bits */
+#define CRC_CR_REV_IN_0 ((uint32_t)0x00000020) /*!< REV_IN Bit 0 */
+#define CRC_CR_REV_IN_1 ((uint32_t)0x00000040) /*!< REV_IN Bit 1 */
+#define CRC_CR_REV_OUT ((uint32_t)0x00000080) /*!< REV_OUT Reverse Output Data bits */
+
+/******************* Bit definition for CRC_INIT register *******************/
+#define CRC_INIT_INIT ((uint32_t)0xFFFFFFFF) /*!< Initial CRC value bits */
+
+/******************************************************************************/
+/* */
+/* Debug MCU (DBGMCU) */
+/* */
+/******************************************************************************/
+
+/**************** Bit definition for DBGMCU_IDCODE register *****************/
+#define DBGMCU_IDCODE_DEV_ID ((uint32_t)0x00000FFF) /*!< Device Identifier */
+
+#define DBGMCU_IDCODE_REV_ID ((uint32_t)0xFFFF0000) /*!< REV_ID[15:0] bits (Revision Identifier) */
+#define DBGMCU_IDCODE_REV_ID_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define DBGMCU_IDCODE_REV_ID_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define DBGMCU_IDCODE_REV_ID_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define DBGMCU_IDCODE_REV_ID_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+#define DBGMCU_IDCODE_REV_ID_4 ((uint32_t)0x00100000) /*!< Bit 4 */
+#define DBGMCU_IDCODE_REV_ID_5 ((uint32_t)0x00200000) /*!< Bit 5 */
+#define DBGMCU_IDCODE_REV_ID_6 ((uint32_t)0x00400000) /*!< Bit 6 */
+#define DBGMCU_IDCODE_REV_ID_7 ((uint32_t)0x00800000) /*!< Bit 7 */
+#define DBGMCU_IDCODE_REV_ID_8 ((uint32_t)0x01000000) /*!< Bit 8 */
+#define DBGMCU_IDCODE_REV_ID_9 ((uint32_t)0x02000000) /*!< Bit 9 */
+#define DBGMCU_IDCODE_REV_ID_10 ((uint32_t)0x04000000) /*!< Bit 10 */
+#define DBGMCU_IDCODE_REV_ID_11 ((uint32_t)0x08000000) /*!< Bit 11 */
+#define DBGMCU_IDCODE_REV_ID_12 ((uint32_t)0x10000000) /*!< Bit 12 */
+#define DBGMCU_IDCODE_REV_ID_13 ((uint32_t)0x20000000) /*!< Bit 13 */
+#define DBGMCU_IDCODE_REV_ID_14 ((uint32_t)0x40000000) /*!< Bit 14 */
+#define DBGMCU_IDCODE_REV_ID_15 ((uint32_t)0x80000000) /*!< Bit 15 */
+
+/****************** Bit definition for DBGMCU_CR register *******************/
+#define DBGMCU_CR_DBG_STOP ((uint32_t)0x00000002) /*!< Debug Stop Mode */
+#define DBGMCU_CR_DBG_STANDBY ((uint32_t)0x00000004) /*!< Debug Standby mode */
+
+/****************** Bit definition for DBGMCU_APB1_FZ register **************/
+#define DBGMCU_APB1_FZ_DBG_TIM2_STOP ((uint32_t)0x00000001) /*!< TIM2 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM3_STOP ((uint32_t)0x00000002) /*!< TIM3 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM14_STOP ((uint32_t)0x00000100) /*!< TIM14 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_RTC_STOP ((uint32_t)0x00000400) /*!< RTC Calendar frozen when core is halted */
+#define DBGMCU_APB1_FZ_DBG_WWDG_STOP ((uint32_t)0x00000800) /*!< Debug Window Watchdog stopped when Core is halted */
+#define DBGMCU_APB1_FZ_DBG_IWDG_STOP ((uint32_t)0x00001000) /*!< Debug Independent Watchdog stopped when Core is halted */
+#define DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00200000) /*!< I2C1 SMBUS timeout mode stopped when Core is halted */
+
+/****************** Bit definition for DBGMCU_APB2_FZ register **************/
+#define DBGMCU_APB2_FZ_DBG_TIM1_STOP ((uint32_t)0x00000800) /*!< TIM1 counter stopped when core is halted */
+#define DBGMCU_APB2_FZ_DBG_TIM16_STOP ((uint32_t)0x00020000) /*!< TIM16 counter stopped when core is halted */
+#define DBGMCU_APB2_FZ_DBG_TIM17_STOP ((uint32_t)0x00040000) /*!< TIM17 counter stopped when core is halted */
+
+/******************************************************************************/
+/* */
+/* DMA Controller (DMA) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for DMA_ISR register ********************/
+#define DMA_ISR_GIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt flag */
+#define DMA_ISR_TCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete flag */
+#define DMA_ISR_HTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer flag */
+#define DMA_ISR_TEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error flag */
+#define DMA_ISR_GIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt flag */
+#define DMA_ISR_TCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete flag */
+#define DMA_ISR_HTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer flag */
+#define DMA_ISR_TEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error flag */
+#define DMA_ISR_GIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt flag */
+#define DMA_ISR_TCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete flag */
+#define DMA_ISR_HTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer flag */
+#define DMA_ISR_TEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error flag */
+#define DMA_ISR_GIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt flag */
+#define DMA_ISR_TCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete flag */
+#define DMA_ISR_HTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer flag */
+#define DMA_ISR_TEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error flag */
+#define DMA_ISR_GIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt flag */
+#define DMA_ISR_TCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete flag */
+#define DMA_ISR_HTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer flag */
+#define DMA_ISR_TEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error flag */
+
+/******************* Bit definition for DMA_IFCR register *******************/
+#define DMA_IFCR_CGIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt clear */
+#define DMA_IFCR_CTCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete clear */
+#define DMA_IFCR_CHTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer clear */
+#define DMA_IFCR_CTEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error clear */
+#define DMA_IFCR_CGIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt clear */
+#define DMA_IFCR_CTCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete clear */
+#define DMA_IFCR_CHTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer clear */
+#define DMA_IFCR_CTEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error clear */
+#define DMA_IFCR_CGIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt clear */
+#define DMA_IFCR_CTCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete clear */
+#define DMA_IFCR_CHTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer clear */
+#define DMA_IFCR_CTEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error clear */
+#define DMA_IFCR_CGIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt clear */
+#define DMA_IFCR_CTCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete clear */
+#define DMA_IFCR_CHTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer clear */
+#define DMA_IFCR_CTEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error clear */
+#define DMA_IFCR_CGIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt clear */
+#define DMA_IFCR_CTCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete clear */
+#define DMA_IFCR_CHTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer clear */
+#define DMA_IFCR_CTEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error clear */
+
+/******************* Bit definition for DMA_CCR register ********************/
+#define DMA_CCR_EN ((uint32_t)0x00000001) /*!< Channel enable */
+#define DMA_CCR_TCIE ((uint32_t)0x00000002) /*!< Transfer complete interrupt enable */
+#define DMA_CCR_HTIE ((uint32_t)0x00000004) /*!< Half Transfer interrupt enable */
+#define DMA_CCR_TEIE ((uint32_t)0x00000008) /*!< Transfer error interrupt enable */
+#define DMA_CCR_DIR ((uint32_t)0x00000010) /*!< Data transfer direction */
+#define DMA_CCR_CIRC ((uint32_t)0x00000020) /*!< Circular mode */
+#define DMA_CCR_PINC ((uint32_t)0x00000040) /*!< Peripheral increment mode */
+#define DMA_CCR_MINC ((uint32_t)0x00000080) /*!< Memory increment mode */
+
+#define DMA_CCR_PSIZE ((uint32_t)0x00000300) /*!< PSIZE[1:0] bits (Peripheral size) */
+#define DMA_CCR_PSIZE_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define DMA_CCR_PSIZE_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+
+#define DMA_CCR_MSIZE ((uint32_t)0x00000C00) /*!< MSIZE[1:0] bits (Memory size) */
+#define DMA_CCR_MSIZE_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define DMA_CCR_MSIZE_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+
+#define DMA_CCR_PL ((uint32_t)0x00003000) /*!< PL[1:0] bits(Channel Priority level)*/
+#define DMA_CCR_PL_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define DMA_CCR_PL_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+
+#define DMA_CCR_MEM2MEM ((uint32_t)0x00004000) /*!< Memory to memory mode */
+
+/****************** Bit definition for DMA_CNDTR register *******************/
+#define DMA_CNDTR_NDT ((uint32_t)0x0000FFFF) /*!< Number of data to Transfer */
+
+/****************** Bit definition for DMA_CPAR register ********************/
+#define DMA_CPAR_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */
+
+/****************** Bit definition for DMA_CMAR register ********************/
+#define DMA_CMAR_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */
+
+/******************************************************************************/
+/* */
+/* External Interrupt/Event Controller (EXTI) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for EXTI_IMR register *******************/
+#define EXTI_IMR_MR0 ((uint32_t)0x00000001) /*!< Interrupt Mask on line 0 */
+#define EXTI_IMR_MR1 ((uint32_t)0x00000002) /*!< Interrupt Mask on line 1 */
+#define EXTI_IMR_MR2 ((uint32_t)0x00000004) /*!< Interrupt Mask on line 2 */
+#define EXTI_IMR_MR3 ((uint32_t)0x00000008) /*!< Interrupt Mask on line 3 */
+#define EXTI_IMR_MR4 ((uint32_t)0x00000010) /*!< Interrupt Mask on line 4 */
+#define EXTI_IMR_MR5 ((uint32_t)0x00000020) /*!< Interrupt Mask on line 5 */
+#define EXTI_IMR_MR6 ((uint32_t)0x00000040) /*!< Interrupt Mask on line 6 */
+#define EXTI_IMR_MR7 ((uint32_t)0x00000080) /*!< Interrupt Mask on line 7 */
+#define EXTI_IMR_MR8 ((uint32_t)0x00000100) /*!< Interrupt Mask on line 8 */
+#define EXTI_IMR_MR9 ((uint32_t)0x00000200) /*!< Interrupt Mask on line 9 */
+#define EXTI_IMR_MR10 ((uint32_t)0x00000400) /*!< Interrupt Mask on line 10 */
+#define EXTI_IMR_MR11 ((uint32_t)0x00000800) /*!< Interrupt Mask on line 11 */
+#define EXTI_IMR_MR12 ((uint32_t)0x00001000) /*!< Interrupt Mask on line 12 */
+#define EXTI_IMR_MR13 ((uint32_t)0x00002000) /*!< Interrupt Mask on line 13 */
+#define EXTI_IMR_MR14 ((uint32_t)0x00004000) /*!< Interrupt Mask on line 14 */
+#define EXTI_IMR_MR15 ((uint32_t)0x00008000) /*!< Interrupt Mask on line 15 */
+#define EXTI_IMR_MR16 ((uint32_t)0x00010000) /*!< Interrupt Mask on line 16 */
+#define EXTI_IMR_MR17 ((uint32_t)0x00020000) /*!< Interrupt Mask on line 17 */
+#define EXTI_IMR_MR19 ((uint32_t)0x00080000) /*!< Interrupt Mask on line 19 */
+#define EXTI_IMR_MR21 ((uint32_t)0x00200000) /*!< Interrupt Mask on line 21 */
+#define EXTI_IMR_MR22 ((uint32_t)0x00400000) /*!< Interrupt Mask on line 22 */
+#define EXTI_IMR_MR23 ((uint32_t)0x00800000) /*!< Interrupt Mask on line 23 */
+#define EXTI_IMR_MR25 ((uint32_t)0x02000000) /*!< Interrupt Mask on line 25 */
+#define EXTI_IMR_MR27 ((uint32_t)0x08000000) /*!< Interrupt Mask on line 27 */
+
+/****************** Bit definition for EXTI_EMR register ********************/
+#define EXTI_EMR_MR0 ((uint32_t)0x00000001) /*!< Event Mask on line 0 */
+#define EXTI_EMR_MR1 ((uint32_t)0x00000002) /*!< Event Mask on line 1 */
+#define EXTI_EMR_MR2 ((uint32_t)0x00000004) /*!< Event Mask on line 2 */
+#define EXTI_EMR_MR3 ((uint32_t)0x00000008) /*!< Event Mask on line 3 */
+#define EXTI_EMR_MR4 ((uint32_t)0x00000010) /*!< Event Mask on line 4 */
+#define EXTI_EMR_MR5 ((uint32_t)0x00000020) /*!< Event Mask on line 5 */
+#define EXTI_EMR_MR6 ((uint32_t)0x00000040) /*!< Event Mask on line 6 */
+#define EXTI_EMR_MR7 ((uint32_t)0x00000080) /*!< Event Mask on line 7 */
+#define EXTI_EMR_MR8 ((uint32_t)0x00000100) /*!< Event Mask on line 8 */
+#define EXTI_EMR_MR9 ((uint32_t)0x00000200) /*!< Event Mask on line 9 */
+#define EXTI_EMR_MR10 ((uint32_t)0x00000400) /*!< Event Mask on line 10 */
+#define EXTI_EMR_MR11 ((uint32_t)0x00000800) /*!< Event Mask on line 11 */
+#define EXTI_EMR_MR12 ((uint32_t)0x00001000) /*!< Event Mask on line 12 */
+#define EXTI_EMR_MR13 ((uint32_t)0x00002000) /*!< Event Mask on line 13 */
+#define EXTI_EMR_MR14 ((uint32_t)0x00004000) /*!< Event Mask on line 14 */
+#define EXTI_EMR_MR15 ((uint32_t)0x00008000) /*!< Event Mask on line 15 */
+#define EXTI_EMR_MR16 ((uint32_t)0x00010000) /*!< Event Mask on line 16 */
+#define EXTI_EMR_MR17 ((uint32_t)0x00020000) /*!< Event Mask on line 17 */
+#define EXTI_EMR_MR19 ((uint32_t)0x00080000) /*!< Event Mask on line 19 */
+#define EXTI_EMR_MR21 ((uint32_t)0x00200000) /*!< Event Mask on line 21 */
+#define EXTI_EMR_MR22 ((uint32_t)0x00400000) /*!< Event Mask on line 22 */
+#define EXTI_EMR_MR23 ((uint32_t)0x00800000) /*!< Event Mask on line 23 */
+#define EXTI_EMR_MR25 ((uint32_t)0x02000000) /*!< Event Mask on line 25 */
+#define EXTI_EMR_MR27 ((uint32_t)0x08000000) /*!< Event Mask on line 27 */
+
+/******************* Bit definition for EXTI_RTSR register ******************/
+#define EXTI_RTSR_TR0 ((uint32_t)0x00000001) /*!< Rising trigger event configuration bit of line 0 */
+#define EXTI_RTSR_TR1 ((uint32_t)0x00000002) /*!< Rising trigger event configuration bit of line 1 */
+#define EXTI_RTSR_TR2 ((uint32_t)0x00000004) /*!< Rising trigger event configuration bit of line 2 */
+#define EXTI_RTSR_TR3 ((uint32_t)0x00000008) /*!< Rising trigger event configuration bit of line 3 */
+#define EXTI_RTSR_TR4 ((uint32_t)0x00000010) /*!< Rising trigger event configuration bit of line 4 */
+#define EXTI_RTSR_TR5 ((uint32_t)0x00000020) /*!< Rising trigger event configuration bit of line 5 */
+#define EXTI_RTSR_TR6 ((uint32_t)0x00000040) /*!< Rising trigger event configuration bit of line 6 */
+#define EXTI_RTSR_TR7 ((uint32_t)0x00000080) /*!< Rising trigger event configuration bit of line 7 */
+#define EXTI_RTSR_TR8 ((uint32_t)0x00000100) /*!< Rising trigger event configuration bit of line 8 */
+#define EXTI_RTSR_TR9 ((uint32_t)0x00000200) /*!< Rising trigger event configuration bit of line 9 */
+#define EXTI_RTSR_TR10 ((uint32_t)0x00000400) /*!< Rising trigger event configuration bit of line 10 */
+#define EXTI_RTSR_TR11 ((uint32_t)0x00000800) /*!< Rising trigger event configuration bit of line 11 */
+#define EXTI_RTSR_TR12 ((uint32_t)0x00001000) /*!< Rising trigger event configuration bit of line 12 */
+#define EXTI_RTSR_TR13 ((uint32_t)0x00002000) /*!< Rising trigger event configuration bit of line 13 */
+#define EXTI_RTSR_TR14 ((uint32_t)0x00004000) /*!< Rising trigger event configuration bit of line 14 */
+#define EXTI_RTSR_TR15 ((uint32_t)0x00008000) /*!< Rising trigger event configuration bit of line 15 */
+#define EXTI_RTSR_TR16 ((uint32_t)0x00010000) /*!< Rising trigger event configuration bit of line 16 */
+#define EXTI_RTSR_TR17 ((uint32_t)0x00020000) /*!< Rising trigger event configuration bit of line 17 */
+#define EXTI_RTSR_TR19 ((uint32_t)0x00080000) /*!< Rising trigger event configuration bit of line 19 */
+
+/******************* Bit definition for EXTI_FTSR register *******************/
+#define EXTI_FTSR_TR0 ((uint32_t)0x00000001) /*!< Falling trigger event configuration bit of line 0 */
+#define EXTI_FTSR_TR1 ((uint32_t)0x00000002) /*!< Falling trigger event configuration bit of line 1 */
+#define EXTI_FTSR_TR2 ((uint32_t)0x00000004) /*!< Falling trigger event configuration bit of line 2 */
+#define EXTI_FTSR_TR3 ((uint32_t)0x00000008) /*!< Falling trigger event configuration bit of line 3 */
+#define EXTI_FTSR_TR4 ((uint32_t)0x00000010) /*!< Falling trigger event configuration bit of line 4 */
+#define EXTI_FTSR_TR5 ((uint32_t)0x00000020) /*!< Falling trigger event configuration bit of line 5 */
+#define EXTI_FTSR_TR6 ((uint32_t)0x00000040) /*!< Falling trigger event configuration bit of line 6 */
+#define EXTI_FTSR_TR7 ((uint32_t)0x00000080) /*!< Falling trigger event configuration bit of line 7 */
+#define EXTI_FTSR_TR8 ((uint32_t)0x00000100) /*!< Falling trigger event configuration bit of line 8 */
+#define EXTI_FTSR_TR9 ((uint32_t)0x00000200) /*!< Falling trigger event configuration bit of line 9 */
+#define EXTI_FTSR_TR10 ((uint32_t)0x00000400) /*!< Falling trigger event configuration bit of line 10 */
+#define EXTI_FTSR_TR11 ((uint32_t)0x00000800) /*!< Falling trigger event configuration bit of line 11 */
+#define EXTI_FTSR_TR12 ((uint32_t)0x00001000) /*!< Falling trigger event configuration bit of line 12 */
+#define EXTI_FTSR_TR13 ((uint32_t)0x00002000) /*!< Falling trigger event configuration bit of line 13 */
+#define EXTI_FTSR_TR14 ((uint32_t)0x00004000) /*!< Falling trigger event configuration bit of line 14 */
+#define EXTI_FTSR_TR15 ((uint32_t)0x00008000) /*!< Falling trigger event configuration bit of line 15 */
+#define EXTI_FTSR_TR16 ((uint32_t)0x00010000) /*!< Falling trigger event configuration bit of line 16 */
+#define EXTI_FTSR_TR17 ((uint32_t)0x00020000) /*!< Falling trigger event configuration bit of line 17 */
+#define EXTI_FTSR_TR19 ((uint32_t)0x00080000) /*!< Falling trigger event configuration bit of line 19 */
+
+/******************* Bit definition for EXTI_SWIER register *******************/
+#define EXTI_SWIER_SWIER0 ((uint32_t)0x00000001) /*!< Software Interrupt on line 0 */
+#define EXTI_SWIER_SWIER1 ((uint32_t)0x00000002) /*!< Software Interrupt on line 1 */
+#define EXTI_SWIER_SWIER2 ((uint32_t)0x00000004) /*!< Software Interrupt on line 2 */
+#define EXTI_SWIER_SWIER3 ((uint32_t)0x00000008) /*!< Software Interrupt on line 3 */
+#define EXTI_SWIER_SWIER4 ((uint32_t)0x00000010) /*!< Software Interrupt on line 4 */
+#define EXTI_SWIER_SWIER5 ((uint32_t)0x00000020) /*!< Software Interrupt on line 5 */
+#define EXTI_SWIER_SWIER6 ((uint32_t)0x00000040) /*!< Software Interrupt on line 6 */
+#define EXTI_SWIER_SWIER7 ((uint32_t)0x00000080) /*!< Software Interrupt on line 7 */
+#define EXTI_SWIER_SWIER8 ((uint32_t)0x00000100) /*!< Software Interrupt on line 8 */
+#define EXTI_SWIER_SWIER9 ((uint32_t)0x00000200) /*!< Software Interrupt on line 9 */
+#define EXTI_SWIER_SWIER10 ((uint32_t)0x00000400) /*!< Software Interrupt on line 10 */
+#define EXTI_SWIER_SWIER11 ((uint32_t)0x00000800) /*!< Software Interrupt on line 11 */
+#define EXTI_SWIER_SWIER12 ((uint32_t)0x00001000) /*!< Software Interrupt on line 12 */
+#define EXTI_SWIER_SWIER13 ((uint32_t)0x00002000) /*!< Software Interrupt on line 13 */
+#define EXTI_SWIER_SWIER14 ((uint32_t)0x00004000) /*!< Software Interrupt on line 14 */
+#define EXTI_SWIER_SWIER15 ((uint32_t)0x00008000) /*!< Software Interrupt on line 15 */
+#define EXTI_SWIER_SWIER16 ((uint32_t)0x00010000) /*!< Software Interrupt on line 16 */
+#define EXTI_SWIER_SWIER17 ((uint32_t)0x00020000) /*!< Software Interrupt on line 17 */
+#define EXTI_SWIER_SWIER19 ((uint32_t)0x00080000) /*!< Software Interrupt on line 19 */
+
+/****************** Bit definition for EXTI_PR register *********************/
+#define EXTI_PR_PR0 ((uint32_t)0x00000001) /*!< Pending bit 0 */
+#define EXTI_PR_PR1 ((uint32_t)0x00000002) /*!< Pending bit 1 */
+#define EXTI_PR_PR2 ((uint32_t)0x00000004) /*!< Pending bit 2 */
+#define EXTI_PR_PR3 ((uint32_t)0x00000008) /*!< Pending bit 3 */
+#define EXTI_PR_PR4 ((uint32_t)0x00000010) /*!< Pending bit 4 */
+#define EXTI_PR_PR5 ((uint32_t)0x00000020) /*!< Pending bit 5 */
+#define EXTI_PR_PR6 ((uint32_t)0x00000040) /*!< Pending bit 6 */
+#define EXTI_PR_PR7 ((uint32_t)0x00000080) /*!< Pending bit 7 */
+#define EXTI_PR_PR8 ((uint32_t)0x00000100) /*!< Pending bit 8 */
+#define EXTI_PR_PR9 ((uint32_t)0x00000200) /*!< Pending bit 9 */
+#define EXTI_PR_PR10 ((uint32_t)0x00000400) /*!< Pending bit 10 */
+#define EXTI_PR_PR11 ((uint32_t)0x00000800) /*!< Pending bit 11 */
+#define EXTI_PR_PR12 ((uint32_t)0x00001000) /*!< Pending bit 12 */
+#define EXTI_PR_PR13 ((uint32_t)0x00002000) /*!< Pending bit 13 */
+#define EXTI_PR_PR14 ((uint32_t)0x00004000) /*!< Pending bit 14 */
+#define EXTI_PR_PR15 ((uint32_t)0x00008000) /*!< Pending bit 15 */
+#define EXTI_PR_PR16 ((uint32_t)0x00010000) /*!< Pending bit 16 */
+#define EXTI_PR_PR17 ((uint32_t)0x00020000) /*!< Pending bit 17 */
+#define EXTI_PR_PR19 ((uint32_t)0x00080000) /*!< Pending bit 19 */
+
+/******************************************************************************/
+/* */
+/* FLASH and Option Bytes Registers */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for FLASH_ACR register ******************/
+#define FLASH_ACR_LATENCY ((uint32_t)0x00000001) /*!< LATENCY bit (Latency) */
+
+#define FLASH_ACR_PRFTBE ((uint32_t)0x00000010) /*!< Prefetch Buffer Enable */
+#define FLASH_ACR_PRFTBS ((uint32_t)0x00000020) /*!< Prefetch Buffer Status */
+
+/****************** Bit definition for FLASH_KEYR register ******************/
+#define FLASH_KEYR_FKEYR ((uint32_t)0xFFFFFFFF) /*!< FPEC Key */
+
+/***************** Bit definition for FLASH_OPTKEYR register ****************/
+#define FLASH_OPTKEYR_OPTKEYR ((uint32_t)0xFFFFFFFF) /*!< Option Byte Key */
+
+/****************** FLASH Keys **********************************************/
+#define FLASH_FKEY1 ((uint32_t)0x45670123) /*!< Flash program erase key1 */
+#define FLASH_FKEY2 ((uint32_t)0xCDEF89AB) /*!< Flash program erase key2: used with FLASH_PEKEY1
+ to unlock the write access to the FPEC. */
+
+#define FLASH_OPTKEY1 ((uint32_t)0x45670123) /*!< Flash option key1 */
+#define FLASH_OPTKEY2 ((uint32_t)0xCDEF89AB) /*!< Flash option key2: used with FLASH_OPTKEY1 to
+ unlock the write access to the option byte block */
+
+/****************** Bit definition for FLASH_SR register *******************/
+#define FLASH_SR_BSY ((uint32_t)0x00000001) /*!< Busy */
+#define FLASH_SR_PGERR ((uint32_t)0x00000004) /*!< Programming Error */
+#define FLASH_SR_WRPRTERR ((uint32_t)0x00000010) /*!< Write Protection Error */
+#define FLASH_SR_EOP ((uint32_t)0x00000020) /*!< End of operation */
+#define FLASH_SR_WRPERR FLASH_SR_WRPRTERR /*!< Legacy of Write Protection Error */
+
+/******************* Bit definition for FLASH_CR register *******************/
+#define FLASH_CR_PG ((uint32_t)0x00000001) /*!< Programming */
+#define FLASH_CR_PER ((uint32_t)0x00000002) /*!< Page Erase */
+#define FLASH_CR_MER ((uint32_t)0x00000004) /*!< Mass Erase */
+#define FLASH_CR_OPTPG ((uint32_t)0x00000010) /*!< Option Byte Programming */
+#define FLASH_CR_OPTER ((uint32_t)0x00000020) /*!< Option Byte Erase */
+#define FLASH_CR_STRT ((uint32_t)0x00000040) /*!< Start */
+#define FLASH_CR_LOCK ((uint32_t)0x00000080) /*!< Lock */
+#define FLASH_CR_OPTWRE ((uint32_t)0x00000200) /*!< Option Bytes Write Enable */
+#define FLASH_CR_ERRIE ((uint32_t)0x00000400) /*!< Error Interrupt Enable */
+#define FLASH_CR_EOPIE ((uint32_t)0x00001000) /*!< End of operation interrupt enable */
+#define FLASH_CR_OBL_LAUNCH ((uint32_t)0x00002000) /*!< Option Bytes Loader Launch */
+
+/******************* Bit definition for FLASH_AR register *******************/
+#define FLASH_AR_FAR ((uint32_t)0xFFFFFFFF) /*!< Flash Address */
+
+/****************** Bit definition for FLASH_OBR register *******************/
+#define FLASH_OBR_OPTERR ((uint32_t)0x00000001) /*!< Option Byte Error */
+#define FLASH_OBR_RDPRT1 ((uint32_t)0x00000002) /*!< Read protection Level 1 */
+#define FLASH_OBR_RDPRT2 ((uint32_t)0x00000004) /*!< Read protection Level 2 */
+
+#define FLASH_OBR_USER ((uint32_t)0x00003700) /*!< User Option Bytes */
+#define FLASH_OBR_IWDG_SW ((uint32_t)0x00000100) /*!< IWDG SW */
+#define FLASH_OBR_nRST_STOP ((uint32_t)0x00000200) /*!< nRST_STOP */
+#define FLASH_OBR_nRST_STDBY ((uint32_t)0x00000400) /*!< nRST_STDBY */
+#define FLASH_OBR_nBOOT1 ((uint32_t)0x00001000) /*!< nBOOT1 */
+#define FLASH_OBR_VDDA_MONITOR ((uint32_t)0x00002000) /*!< VDDA power supply supervisor */
+
+/* Old BOOT1 bit definition, maintained for legacy purpose */
+#define FLASH_OBR_BOOT1 FLASH_OBR_nBOOT1
+
+/* Old OBR_VDDA bit definition, maintained for legacy purpose */
+#define FLASH_OBR_VDDA_ANALOG FLASH_OBR_VDDA_MONITOR
+
+/****************** Bit definition for FLASH_WRPR register ******************/
+#define FLASH_WRPR_WRP ((uint32_t)0x0000FFFF) /*!< Write Protect */
+
+/*----------------------------------------------------------------------------*/
+
+/****************** Bit definition for OB_RDP register **********************/
+#define OB_RDP_RDP ((uint32_t)0x000000FF) /*!< Read protection option byte */
+#define OB_RDP_nRDP ((uint32_t)0x0000FF00) /*!< Read protection complemented option byte */
+
+/****************** Bit definition for OB_USER register *********************/
+#define OB_USER_USER ((uint32_t)0x00FF0000) /*!< User option byte */
+#define OB_USER_nUSER ((uint32_t)0xFF000000) /*!< User complemented option byte */
+
+/****************** Bit definition for OB_WRP0 register *********************/
+#define OB_WRP0_WRP0 ((uint32_t)0x000000FF) /*!< Flash memory write protection option bytes */
+#define OB_WRP0_nWRP0 ((uint32_t)0x0000FF00) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for OB_WRP1 register *********************/
+#define OB_WRP1_WRP1 ((uint32_t)0x00FF0000) /*!< Flash memory write protection option bytes */
+#define OB_WRP1_nWRP1 ((uint32_t)0xFF000000) /*!< Flash memory write protection complemented option bytes */
+
+/******************************************************************************/
+/* */
+/* General Purpose IOs (GPIO) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for GPIO_MODER register *****************/
+#define GPIO_MODER_MODER0 ((uint32_t)0x00000003)
+#define GPIO_MODER_MODER0_0 ((uint32_t)0x00000001)
+#define GPIO_MODER_MODER0_1 ((uint32_t)0x00000002)
+#define GPIO_MODER_MODER1 ((uint32_t)0x0000000C)
+#define GPIO_MODER_MODER1_0 ((uint32_t)0x00000004)
+#define GPIO_MODER_MODER1_1 ((uint32_t)0x00000008)
+#define GPIO_MODER_MODER2 ((uint32_t)0x00000030)
+#define GPIO_MODER_MODER2_0 ((uint32_t)0x00000010)
+#define GPIO_MODER_MODER2_1 ((uint32_t)0x00000020)
+#define GPIO_MODER_MODER3 ((uint32_t)0x000000C0)
+#define GPIO_MODER_MODER3_0 ((uint32_t)0x00000040)
+#define GPIO_MODER_MODER3_1 ((uint32_t)0x00000080)
+#define GPIO_MODER_MODER4 ((uint32_t)0x00000300)
+#define GPIO_MODER_MODER4_0 ((uint32_t)0x00000100)
+#define GPIO_MODER_MODER4_1 ((uint32_t)0x00000200)
+#define GPIO_MODER_MODER5 ((uint32_t)0x00000C00)
+#define GPIO_MODER_MODER5_0 ((uint32_t)0x00000400)
+#define GPIO_MODER_MODER5_1 ((uint32_t)0x00000800)
+#define GPIO_MODER_MODER6 ((uint32_t)0x00003000)
+#define GPIO_MODER_MODER6_0 ((uint32_t)0x00001000)
+#define GPIO_MODER_MODER6_1 ((uint32_t)0x00002000)
+#define GPIO_MODER_MODER7 ((uint32_t)0x0000C000)
+#define GPIO_MODER_MODER7_0 ((uint32_t)0x00004000)
+#define GPIO_MODER_MODER7_1 ((uint32_t)0x00008000)
+#define GPIO_MODER_MODER8 ((uint32_t)0x00030000)
+#define GPIO_MODER_MODER8_0 ((uint32_t)0x00010000)
+#define GPIO_MODER_MODER8_1 ((uint32_t)0x00020000)
+#define GPIO_MODER_MODER9 ((uint32_t)0x000C0000)
+#define GPIO_MODER_MODER9_0 ((uint32_t)0x00040000)
+#define GPIO_MODER_MODER9_1 ((uint32_t)0x00080000)
+#define GPIO_MODER_MODER10 ((uint32_t)0x00300000)
+#define GPIO_MODER_MODER10_0 ((uint32_t)0x00100000)
+#define GPIO_MODER_MODER10_1 ((uint32_t)0x00200000)
+#define GPIO_MODER_MODER11 ((uint32_t)0x00C00000)
+#define GPIO_MODER_MODER11_0 ((uint32_t)0x00400000)
+#define GPIO_MODER_MODER11_1 ((uint32_t)0x00800000)
+#define GPIO_MODER_MODER12 ((uint32_t)0x03000000)
+#define GPIO_MODER_MODER12_0 ((uint32_t)0x01000000)
+#define GPIO_MODER_MODER12_1 ((uint32_t)0x02000000)
+#define GPIO_MODER_MODER13 ((uint32_t)0x0C000000)
+#define GPIO_MODER_MODER13_0 ((uint32_t)0x04000000)
+#define GPIO_MODER_MODER13_1 ((uint32_t)0x08000000)
+#define GPIO_MODER_MODER14 ((uint32_t)0x30000000)
+#define GPIO_MODER_MODER14_0 ((uint32_t)0x10000000)
+#define GPIO_MODER_MODER14_1 ((uint32_t)0x20000000)
+#define GPIO_MODER_MODER15 ((uint32_t)0xC0000000)
+#define GPIO_MODER_MODER15_0 ((uint32_t)0x40000000)
+#define GPIO_MODER_MODER15_1 ((uint32_t)0x80000000)
+
+/****************** Bit definition for GPIO_OTYPER register *****************/
+#define GPIO_OTYPER_OT_0 ((uint32_t)0x00000001)
+#define GPIO_OTYPER_OT_1 ((uint32_t)0x00000002)
+#define GPIO_OTYPER_OT_2 ((uint32_t)0x00000004)
+#define GPIO_OTYPER_OT_3 ((uint32_t)0x00000008)
+#define GPIO_OTYPER_OT_4 ((uint32_t)0x00000010)
+#define GPIO_OTYPER_OT_5 ((uint32_t)0x00000020)
+#define GPIO_OTYPER_OT_6 ((uint32_t)0x00000040)
+#define GPIO_OTYPER_OT_7 ((uint32_t)0x00000080)
+#define GPIO_OTYPER_OT_8 ((uint32_t)0x00000100)
+#define GPIO_OTYPER_OT_9 ((uint32_t)0x00000200)
+#define GPIO_OTYPER_OT_10 ((uint32_t)0x00000400)
+#define GPIO_OTYPER_OT_11 ((uint32_t)0x00000800)
+#define GPIO_OTYPER_OT_12 ((uint32_t)0x00001000)
+#define GPIO_OTYPER_OT_13 ((uint32_t)0x00002000)
+#define GPIO_OTYPER_OT_14 ((uint32_t)0x00004000)
+#define GPIO_OTYPER_OT_15 ((uint32_t)0x00008000)
+
+/**************** Bit definition for GPIO_OSPEEDR register ******************/
+#define GPIO_OSPEEDR_OSPEEDR0 ((uint32_t)0x00000003)
+#define GPIO_OSPEEDR_OSPEEDR0_0 ((uint32_t)0x00000001)
+#define GPIO_OSPEEDR_OSPEEDR0_1 ((uint32_t)0x00000002)
+#define GPIO_OSPEEDR_OSPEEDR1 ((uint32_t)0x0000000C)
+#define GPIO_OSPEEDR_OSPEEDR1_0 ((uint32_t)0x00000004)
+#define GPIO_OSPEEDR_OSPEEDR1_1 ((uint32_t)0x00000008)
+#define GPIO_OSPEEDR_OSPEEDR2 ((uint32_t)0x00000030)
+#define GPIO_OSPEEDR_OSPEEDR2_0 ((uint32_t)0x00000010)
+#define GPIO_OSPEEDR_OSPEEDR2_1 ((uint32_t)0x00000020)
+#define GPIO_OSPEEDR_OSPEEDR3 ((uint32_t)0x000000C0)
+#define GPIO_OSPEEDR_OSPEEDR3_0 ((uint32_t)0x00000040)
+#define GPIO_OSPEEDR_OSPEEDR3_1 ((uint32_t)0x00000080)
+#define GPIO_OSPEEDR_OSPEEDR4 ((uint32_t)0x00000300)
+#define GPIO_OSPEEDR_OSPEEDR4_0 ((uint32_t)0x00000100)
+#define GPIO_OSPEEDR_OSPEEDR4_1 ((uint32_t)0x00000200)
+#define GPIO_OSPEEDR_OSPEEDR5 ((uint32_t)0x00000C00)
+#define GPIO_OSPEEDR_OSPEEDR5_0 ((uint32_t)0x00000400)
+#define GPIO_OSPEEDR_OSPEEDR5_1 ((uint32_t)0x00000800)
+#define GPIO_OSPEEDR_OSPEEDR6 ((uint32_t)0x00003000)
+#define GPIO_OSPEEDR_OSPEEDR6_0 ((uint32_t)0x00001000)
+#define GPIO_OSPEEDR_OSPEEDR6_1 ((uint32_t)0x00002000)
+#define GPIO_OSPEEDR_OSPEEDR7 ((uint32_t)0x0000C000)
+#define GPIO_OSPEEDR_OSPEEDR7_0 ((uint32_t)0x00004000)
+#define GPIO_OSPEEDR_OSPEEDR7_1 ((uint32_t)0x00008000)
+#define GPIO_OSPEEDR_OSPEEDR8 ((uint32_t)0x00030000)
+#define GPIO_OSPEEDR_OSPEEDR8_0 ((uint32_t)0x00010000)
+#define GPIO_OSPEEDR_OSPEEDR8_1 ((uint32_t)0x00020000)
+#define GPIO_OSPEEDR_OSPEEDR9 ((uint32_t)0x000C0000)
+#define GPIO_OSPEEDR_OSPEEDR9_0 ((uint32_t)0x00040000)
+#define GPIO_OSPEEDR_OSPEEDR9_1 ((uint32_t)0x00080000)
+#define GPIO_OSPEEDR_OSPEEDR10 ((uint32_t)0x00300000)
+#define GPIO_OSPEEDR_OSPEEDR10_0 ((uint32_t)0x00100000)
+#define GPIO_OSPEEDR_OSPEEDR10_1 ((uint32_t)0x00200000)
+#define GPIO_OSPEEDR_OSPEEDR11 ((uint32_t)0x00C00000)
+#define GPIO_OSPEEDR_OSPEEDR11_0 ((uint32_t)0x00400000)
+#define GPIO_OSPEEDR_OSPEEDR11_1 ((uint32_t)0x00800000)
+#define GPIO_OSPEEDR_OSPEEDR12 ((uint32_t)0x03000000)
+#define GPIO_OSPEEDR_OSPEEDR12_0 ((uint32_t)0x01000000)
+#define GPIO_OSPEEDR_OSPEEDR12_1 ((uint32_t)0x02000000)
+#define GPIO_OSPEEDR_OSPEEDR13 ((uint32_t)0x0C000000)
+#define GPIO_OSPEEDR_OSPEEDR13_0 ((uint32_t)0x04000000)
+#define GPIO_OSPEEDR_OSPEEDR13_1 ((uint32_t)0x08000000)
+#define GPIO_OSPEEDR_OSPEEDR14 ((uint32_t)0x30000000)
+#define GPIO_OSPEEDR_OSPEEDR14_0 ((uint32_t)0x10000000)
+#define GPIO_OSPEEDR_OSPEEDR14_1 ((uint32_t)0x20000000)
+#define GPIO_OSPEEDR_OSPEEDR15 ((uint32_t)0xC0000000)
+#define GPIO_OSPEEDR_OSPEEDR15_0 ((uint32_t)0x40000000)
+#define GPIO_OSPEEDR_OSPEEDR15_1 ((uint32_t)0x80000000)
+
+/* Old Bit definition for GPIO_OSPEEDR register maintained for legacy purpose */
+#define GPIO_OSPEEDER_OSPEEDR0 GPIO_OSPEEDR_OSPEEDR0
+#define GPIO_OSPEEDER_OSPEEDR0_0 GPIO_OSPEEDR_OSPEEDR0_0
+#define GPIO_OSPEEDER_OSPEEDR0_1 GPIO_OSPEEDR_OSPEEDR0_1
+#define GPIO_OSPEEDER_OSPEEDR1 GPIO_OSPEEDR_OSPEEDR1
+#define GPIO_OSPEEDER_OSPEEDR1_0 GPIO_OSPEEDR_OSPEEDR1_0
+#define GPIO_OSPEEDER_OSPEEDR1_1 GPIO_OSPEEDR_OSPEEDR1_1
+#define GPIO_OSPEEDER_OSPEEDR2 GPIO_OSPEEDR_OSPEEDR2
+#define GPIO_OSPEEDER_OSPEEDR2_0 GPIO_OSPEEDR_OSPEEDR2_0
+#define GPIO_OSPEEDER_OSPEEDR2_1 GPIO_OSPEEDR_OSPEEDR2_1
+#define GPIO_OSPEEDER_OSPEEDR3 GPIO_OSPEEDR_OSPEEDR3
+#define GPIO_OSPEEDER_OSPEEDR3_0 GPIO_OSPEEDR_OSPEEDR3_0
+#define GPIO_OSPEEDER_OSPEEDR3_1 GPIO_OSPEEDR_OSPEEDR3_1
+#define GPIO_OSPEEDER_OSPEEDR4 GPIO_OSPEEDR_OSPEEDR4
+#define GPIO_OSPEEDER_OSPEEDR4_0 GPIO_OSPEEDR_OSPEEDR4_0
+#define GPIO_OSPEEDER_OSPEEDR4_1 GPIO_OSPEEDR_OSPEEDR4_1
+#define GPIO_OSPEEDER_OSPEEDR5 GPIO_OSPEEDR_OSPEEDR5
+#define GPIO_OSPEEDER_OSPEEDR5_0 GPIO_OSPEEDR_OSPEEDR5_0
+#define GPIO_OSPEEDER_OSPEEDR5_1 GPIO_OSPEEDR_OSPEEDR5_1
+#define GPIO_OSPEEDER_OSPEEDR6 GPIO_OSPEEDR_OSPEEDR6
+#define GPIO_OSPEEDER_OSPEEDR6_0 GPIO_OSPEEDR_OSPEEDR6_0
+#define GPIO_OSPEEDER_OSPEEDR6_1 GPIO_OSPEEDR_OSPEEDR6_1
+#define GPIO_OSPEEDER_OSPEEDR7 GPIO_OSPEEDR_OSPEEDR7
+#define GPIO_OSPEEDER_OSPEEDR7_0 GPIO_OSPEEDR_OSPEEDR7_0
+#define GPIO_OSPEEDER_OSPEEDR7_1 GPIO_OSPEEDR_OSPEEDR7_1
+#define GPIO_OSPEEDER_OSPEEDR8 GPIO_OSPEEDR_OSPEEDR8
+#define GPIO_OSPEEDER_OSPEEDR8_0 GPIO_OSPEEDR_OSPEEDR8_0
+#define GPIO_OSPEEDER_OSPEEDR8_1 GPIO_OSPEEDR_OSPEEDR8_1
+#define GPIO_OSPEEDER_OSPEEDR9 GPIO_OSPEEDR_OSPEEDR9
+#define GPIO_OSPEEDER_OSPEEDR9_0 GPIO_OSPEEDR_OSPEEDR9_0
+#define GPIO_OSPEEDER_OSPEEDR9_1 GPIO_OSPEEDR_OSPEEDR9_1
+#define GPIO_OSPEEDER_OSPEEDR10 GPIO_OSPEEDR_OSPEEDR10
+#define GPIO_OSPEEDER_OSPEEDR10_0 GPIO_OSPEEDR_OSPEEDR10_0
+#define GPIO_OSPEEDER_OSPEEDR10_1 GPIO_OSPEEDR_OSPEEDR10_1
+#define GPIO_OSPEEDER_OSPEEDR11 GPIO_OSPEEDR_OSPEEDR11
+#define GPIO_OSPEEDER_OSPEEDR11_0 GPIO_OSPEEDR_OSPEEDR11_0
+#define GPIO_OSPEEDER_OSPEEDR11_1 GPIO_OSPEEDR_OSPEEDR11_1
+#define GPIO_OSPEEDER_OSPEEDR12 GPIO_OSPEEDR_OSPEEDR12
+#define GPIO_OSPEEDER_OSPEEDR12_0 GPIO_OSPEEDR_OSPEEDR12_0
+#define GPIO_OSPEEDER_OSPEEDR12_1 GPIO_OSPEEDR_OSPEEDR12_1
+#define GPIO_OSPEEDER_OSPEEDR13 GPIO_OSPEEDR_OSPEEDR13
+#define GPIO_OSPEEDER_OSPEEDR13_0 GPIO_OSPEEDR_OSPEEDR13_0
+#define GPIO_OSPEEDER_OSPEEDR13_1 GPIO_OSPEEDR_OSPEEDR13_1
+#define GPIO_OSPEEDER_OSPEEDR14 GPIO_OSPEEDR_OSPEEDR14
+#define GPIO_OSPEEDER_OSPEEDR14_0 GPIO_OSPEEDR_OSPEEDR14_0
+#define GPIO_OSPEEDER_OSPEEDR14_1 GPIO_OSPEEDR_OSPEEDR14_1
+#define GPIO_OSPEEDER_OSPEEDR15 GPIO_OSPEEDR_OSPEEDR15
+#define GPIO_OSPEEDER_OSPEEDR15_0 GPIO_OSPEEDR_OSPEEDR15_0
+#define GPIO_OSPEEDER_OSPEEDR15_1 GPIO_OSPEEDR_OSPEEDR15_1
+
+/******************* Bit definition for GPIO_PUPDR register ******************/
+#define GPIO_PUPDR_PUPDR0 ((uint32_t)0x00000003)
+#define GPIO_PUPDR_PUPDR0_0 ((uint32_t)0x00000001)
+#define GPIO_PUPDR_PUPDR0_1 ((uint32_t)0x00000002)
+#define GPIO_PUPDR_PUPDR1 ((uint32_t)0x0000000C)
+#define GPIO_PUPDR_PUPDR1_0 ((uint32_t)0x00000004)
+#define GPIO_PUPDR_PUPDR1_1 ((uint32_t)0x00000008)
+#define GPIO_PUPDR_PUPDR2 ((uint32_t)0x00000030)
+#define GPIO_PUPDR_PUPDR2_0 ((uint32_t)0x00000010)
+#define GPIO_PUPDR_PUPDR2_1 ((uint32_t)0x00000020)
+#define GPIO_PUPDR_PUPDR3 ((uint32_t)0x000000C0)
+#define GPIO_PUPDR_PUPDR3_0 ((uint32_t)0x00000040)
+#define GPIO_PUPDR_PUPDR3_1 ((uint32_t)0x00000080)
+#define GPIO_PUPDR_PUPDR4 ((uint32_t)0x00000300)
+#define GPIO_PUPDR_PUPDR4_0 ((uint32_t)0x00000100)
+#define GPIO_PUPDR_PUPDR4_1 ((uint32_t)0x00000200)
+#define GPIO_PUPDR_PUPDR5 ((uint32_t)0x00000C00)
+#define GPIO_PUPDR_PUPDR5_0 ((uint32_t)0x00000400)
+#define GPIO_PUPDR_PUPDR5_1 ((uint32_t)0x00000800)
+#define GPIO_PUPDR_PUPDR6 ((uint32_t)0x00003000)
+#define GPIO_PUPDR_PUPDR6_0 ((uint32_t)0x00001000)
+#define GPIO_PUPDR_PUPDR6_1 ((uint32_t)0x00002000)
+#define GPIO_PUPDR_PUPDR7 ((uint32_t)0x0000C000)
+#define GPIO_PUPDR_PUPDR7_0 ((uint32_t)0x00004000)
+#define GPIO_PUPDR_PUPDR7_1 ((uint32_t)0x00008000)
+#define GPIO_PUPDR_PUPDR8 ((uint32_t)0x00030000)
+#define GPIO_PUPDR_PUPDR8_0 ((uint32_t)0x00010000)
+#define GPIO_PUPDR_PUPDR8_1 ((uint32_t)0x00020000)
+#define GPIO_PUPDR_PUPDR9 ((uint32_t)0x000C0000)
+#define GPIO_PUPDR_PUPDR9_0 ((uint32_t)0x00040000)
+#define GPIO_PUPDR_PUPDR9_1 ((uint32_t)0x00080000)
+#define GPIO_PUPDR_PUPDR10 ((uint32_t)0x00300000)
+#define GPIO_PUPDR_PUPDR10_0 ((uint32_t)0x00100000)
+#define GPIO_PUPDR_PUPDR10_1 ((uint32_t)0x00200000)
+#define GPIO_PUPDR_PUPDR11 ((uint32_t)0x00C00000)
+#define GPIO_PUPDR_PUPDR11_0 ((uint32_t)0x00400000)
+#define GPIO_PUPDR_PUPDR11_1 ((uint32_t)0x00800000)
+#define GPIO_PUPDR_PUPDR12 ((uint32_t)0x03000000)
+#define GPIO_PUPDR_PUPDR12_0 ((uint32_t)0x01000000)
+#define GPIO_PUPDR_PUPDR12_1 ((uint32_t)0x02000000)
+#define GPIO_PUPDR_PUPDR13 ((uint32_t)0x0C000000)
+#define GPIO_PUPDR_PUPDR13_0 ((uint32_t)0x04000000)
+#define GPIO_PUPDR_PUPDR13_1 ((uint32_t)0x08000000)
+#define GPIO_PUPDR_PUPDR14 ((uint32_t)0x30000000)
+#define GPIO_PUPDR_PUPDR14_0 ((uint32_t)0x10000000)
+#define GPIO_PUPDR_PUPDR14_1 ((uint32_t)0x20000000)
+#define GPIO_PUPDR_PUPDR15 ((uint32_t)0xC0000000)
+#define GPIO_PUPDR_PUPDR15_0 ((uint32_t)0x40000000)
+#define GPIO_PUPDR_PUPDR15_1 ((uint32_t)0x80000000)
+
+/******************* Bit definition for GPIO_IDR register *******************/
+#define GPIO_IDR_0 ((uint32_t)0x00000001)
+#define GPIO_IDR_1 ((uint32_t)0x00000002)
+#define GPIO_IDR_2 ((uint32_t)0x00000004)
+#define GPIO_IDR_3 ((uint32_t)0x00000008)
+#define GPIO_IDR_4 ((uint32_t)0x00000010)
+#define GPIO_IDR_5 ((uint32_t)0x00000020)
+#define GPIO_IDR_6 ((uint32_t)0x00000040)
+#define GPIO_IDR_7 ((uint32_t)0x00000080)
+#define GPIO_IDR_8 ((uint32_t)0x00000100)
+#define GPIO_IDR_9 ((uint32_t)0x00000200)
+#define GPIO_IDR_10 ((uint32_t)0x00000400)
+#define GPIO_IDR_11 ((uint32_t)0x00000800)
+#define GPIO_IDR_12 ((uint32_t)0x00001000)
+#define GPIO_IDR_13 ((uint32_t)0x00002000)
+#define GPIO_IDR_14 ((uint32_t)0x00004000)
+#define GPIO_IDR_15 ((uint32_t)0x00008000)
+
+/****************** Bit definition for GPIO_ODR register ********************/
+#define GPIO_ODR_0 ((uint32_t)0x00000001)
+#define GPIO_ODR_1 ((uint32_t)0x00000002)
+#define GPIO_ODR_2 ((uint32_t)0x00000004)
+#define GPIO_ODR_3 ((uint32_t)0x00000008)
+#define GPIO_ODR_4 ((uint32_t)0x00000010)
+#define GPIO_ODR_5 ((uint32_t)0x00000020)
+#define GPIO_ODR_6 ((uint32_t)0x00000040)
+#define GPIO_ODR_7 ((uint32_t)0x00000080)
+#define GPIO_ODR_8 ((uint32_t)0x00000100)
+#define GPIO_ODR_9 ((uint32_t)0x00000200)
+#define GPIO_ODR_10 ((uint32_t)0x00000400)
+#define GPIO_ODR_11 ((uint32_t)0x00000800)
+#define GPIO_ODR_12 ((uint32_t)0x00001000)
+#define GPIO_ODR_13 ((uint32_t)0x00002000)
+#define GPIO_ODR_14 ((uint32_t)0x00004000)
+#define GPIO_ODR_15 ((uint32_t)0x00008000)
+
+/****************** Bit definition for GPIO_BSRR register ********************/
+#define GPIO_BSRR_BS_0 ((uint32_t)0x00000001)
+#define GPIO_BSRR_BS_1 ((uint32_t)0x00000002)
+#define GPIO_BSRR_BS_2 ((uint32_t)0x00000004)
+#define GPIO_BSRR_BS_3 ((uint32_t)0x00000008)
+#define GPIO_BSRR_BS_4 ((uint32_t)0x00000010)
+#define GPIO_BSRR_BS_5 ((uint32_t)0x00000020)
+#define GPIO_BSRR_BS_6 ((uint32_t)0x00000040)
+#define GPIO_BSRR_BS_7 ((uint32_t)0x00000080)
+#define GPIO_BSRR_BS_8 ((uint32_t)0x00000100)
+#define GPIO_BSRR_BS_9 ((uint32_t)0x00000200)
+#define GPIO_BSRR_BS_10 ((uint32_t)0x00000400)
+#define GPIO_BSRR_BS_11 ((uint32_t)0x00000800)
+#define GPIO_BSRR_BS_12 ((uint32_t)0x00001000)
+#define GPIO_BSRR_BS_13 ((uint32_t)0x00002000)
+#define GPIO_BSRR_BS_14 ((uint32_t)0x00004000)
+#define GPIO_BSRR_BS_15 ((uint32_t)0x00008000)
+#define GPIO_BSRR_BR_0 ((uint32_t)0x00010000)
+#define GPIO_BSRR_BR_1 ((uint32_t)0x00020000)
+#define GPIO_BSRR_BR_2 ((uint32_t)0x00040000)
+#define GPIO_BSRR_BR_3 ((uint32_t)0x00080000)
+#define GPIO_BSRR_BR_4 ((uint32_t)0x00100000)
+#define GPIO_BSRR_BR_5 ((uint32_t)0x00200000)
+#define GPIO_BSRR_BR_6 ((uint32_t)0x00400000)
+#define GPIO_BSRR_BR_7 ((uint32_t)0x00800000)
+#define GPIO_BSRR_BR_8 ((uint32_t)0x01000000)
+#define GPIO_BSRR_BR_9 ((uint32_t)0x02000000)
+#define GPIO_BSRR_BR_10 ((uint32_t)0x04000000)
+#define GPIO_BSRR_BR_11 ((uint32_t)0x08000000)
+#define GPIO_BSRR_BR_12 ((uint32_t)0x10000000)
+#define GPIO_BSRR_BR_13 ((uint32_t)0x20000000)
+#define GPIO_BSRR_BR_14 ((uint32_t)0x40000000)
+#define GPIO_BSRR_BR_15 ((uint32_t)0x80000000)
+
+/****************** Bit definition for GPIO_LCKR register ********************/
+#define GPIO_LCKR_LCK0 ((uint32_t)0x00000001)
+#define GPIO_LCKR_LCK1 ((uint32_t)0x00000002)
+#define GPIO_LCKR_LCK2 ((uint32_t)0x00000004)
+#define GPIO_LCKR_LCK3 ((uint32_t)0x00000008)
+#define GPIO_LCKR_LCK4 ((uint32_t)0x00000010)
+#define GPIO_LCKR_LCK5 ((uint32_t)0x00000020)
+#define GPIO_LCKR_LCK6 ((uint32_t)0x00000040)
+#define GPIO_LCKR_LCK7 ((uint32_t)0x00000080)
+#define GPIO_LCKR_LCK8 ((uint32_t)0x00000100)
+#define GPIO_LCKR_LCK9 ((uint32_t)0x00000200)
+#define GPIO_LCKR_LCK10 ((uint32_t)0x00000400)
+#define GPIO_LCKR_LCK11 ((uint32_t)0x00000800)
+#define GPIO_LCKR_LCK12 ((uint32_t)0x00001000)
+#define GPIO_LCKR_LCK13 ((uint32_t)0x00002000)
+#define GPIO_LCKR_LCK14 ((uint32_t)0x00004000)
+#define GPIO_LCKR_LCK15 ((uint32_t)0x00008000)
+#define GPIO_LCKR_LCKK ((uint32_t)0x00010000)
+
+/****************** Bit definition for GPIO_AFRL register ********************/
+#define GPIO_AFRL_AFRL0 ((uint32_t)0x0000000F)
+#define GPIO_AFRL_AFRL1 ((uint32_t)0x000000F0)
+#define GPIO_AFRL_AFRL2 ((uint32_t)0x00000F00)
+#define GPIO_AFRL_AFRL3 ((uint32_t)0x0000F000)
+#define GPIO_AFRL_AFRL4 ((uint32_t)0x000F0000)
+#define GPIO_AFRL_AFRL5 ((uint32_t)0x00F00000)
+#define GPIO_AFRL_AFRL6 ((uint32_t)0x0F000000)
+#define GPIO_AFRL_AFRL7 ((uint32_t)0xF0000000)
+
+/****************** Bit definition for GPIO_AFRH register ********************/
+#define GPIO_AFRH_AFRH0 ((uint32_t)0x0000000F)
+#define GPIO_AFRH_AFRH1 ((uint32_t)0x000000F0)
+#define GPIO_AFRH_AFRH2 ((uint32_t)0x00000F00)
+#define GPIO_AFRH_AFRH3 ((uint32_t)0x0000F000)
+#define GPIO_AFRH_AFRH4 ((uint32_t)0x000F0000)
+#define GPIO_AFRH_AFRH5 ((uint32_t)0x00F00000)
+#define GPIO_AFRH_AFRH6 ((uint32_t)0x0F000000)
+#define GPIO_AFRH_AFRH7 ((uint32_t)0xF0000000)
+
+/****************** Bit definition for GPIO_BRR register *********************/
+#define GPIO_BRR_BR_0 ((uint32_t)0x00000001)
+#define GPIO_BRR_BR_1 ((uint32_t)0x00000002)
+#define GPIO_BRR_BR_2 ((uint32_t)0x00000004)
+#define GPIO_BRR_BR_3 ((uint32_t)0x00000008)
+#define GPIO_BRR_BR_4 ((uint32_t)0x00000010)
+#define GPIO_BRR_BR_5 ((uint32_t)0x00000020)
+#define GPIO_BRR_BR_6 ((uint32_t)0x00000040)
+#define GPIO_BRR_BR_7 ((uint32_t)0x00000080)
+#define GPIO_BRR_BR_8 ((uint32_t)0x00000100)
+#define GPIO_BRR_BR_9 ((uint32_t)0x00000200)
+#define GPIO_BRR_BR_10 ((uint32_t)0x00000400)
+#define GPIO_BRR_BR_11 ((uint32_t)0x00000800)
+#define GPIO_BRR_BR_12 ((uint32_t)0x00001000)
+#define GPIO_BRR_BR_13 ((uint32_t)0x00002000)
+#define GPIO_BRR_BR_14 ((uint32_t)0x00004000)
+#define GPIO_BRR_BR_15 ((uint32_t)0x00008000)
+
+/******************************************************************************/
+/* */
+/* Inter-integrated Circuit Interface (I2C) */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for I2C_CR1 register *******************/
+#define I2C_CR1_PE ((uint32_t)0x00000001) /*!< Peripheral enable */
+#define I2C_CR1_TXIE ((uint32_t)0x00000002) /*!< TX interrupt enable */
+#define I2C_CR1_RXIE ((uint32_t)0x00000004) /*!< RX interrupt enable */
+#define I2C_CR1_ADDRIE ((uint32_t)0x00000008) /*!< Address match interrupt enable */
+#define I2C_CR1_NACKIE ((uint32_t)0x00000010) /*!< NACK received interrupt enable */
+#define I2C_CR1_STOPIE ((uint32_t)0x00000020) /*!< STOP detection interrupt enable */
+#define I2C_CR1_TCIE ((uint32_t)0x00000040) /*!< Transfer complete interrupt enable */
+#define I2C_CR1_ERRIE ((uint32_t)0x00000080) /*!< Errors interrupt enable */
+#define I2C_CR1_DFN ((uint32_t)0x00000F00) /*!< Digital noise filter */
+#define I2C_CR1_ANFOFF ((uint32_t)0x00001000) /*!< Analog noise filter OFF */
+#define I2C_CR1_SWRST ((uint32_t)0x00002000) /*!< Software reset */
+#define I2C_CR1_TXDMAEN ((uint32_t)0x00004000) /*!< DMA transmission requests enable */
+#define I2C_CR1_RXDMAEN ((uint32_t)0x00008000) /*!< DMA reception requests enable */
+#define I2C_CR1_SBC ((uint32_t)0x00010000) /*!< Slave byte control */
+#define I2C_CR1_NOSTRETCH ((uint32_t)0x00020000) /*!< Clock stretching disable */
+#define I2C_CR1_WUPEN ((uint32_t)0x00040000) /*!< Wakeup from STOP enable */
+#define I2C_CR1_GCEN ((uint32_t)0x00080000) /*!< General call enable */
+#define I2C_CR1_SMBHEN ((uint32_t)0x00100000) /*!< SMBus host address enable */
+#define I2C_CR1_SMBDEN ((uint32_t)0x00200000) /*!< SMBus device default address enable */
+#define I2C_CR1_ALERTEN ((uint32_t)0x00400000) /*!< SMBus alert enable */
+#define I2C_CR1_PECEN ((uint32_t)0x00800000) /*!< PEC enable */
+
+/****************** Bit definition for I2C_CR2 register ********************/
+#define I2C_CR2_SADD ((uint32_t)0x000003FF) /*!< Slave address (master mode) */
+#define I2C_CR2_RD_WRN ((uint32_t)0x00000400) /*!< Transfer direction (master mode) */
+#define I2C_CR2_ADD10 ((uint32_t)0x00000800) /*!< 10-bit addressing mode (master mode) */
+#define I2C_CR2_HEAD10R ((uint32_t)0x00001000) /*!< 10-bit address header only read direction (master mode) */
+#define I2C_CR2_START ((uint32_t)0x00002000) /*!< START generation */
+#define I2C_CR2_STOP ((uint32_t)0x00004000) /*!< STOP generation (master mode) */
+#define I2C_CR2_NACK ((uint32_t)0x00008000) /*!< NACK generation (slave mode) */
+#define I2C_CR2_NBYTES ((uint32_t)0x00FF0000) /*!< Number of bytes */
+#define I2C_CR2_RELOAD ((uint32_t)0x01000000) /*!< NBYTES reload mode */
+#define I2C_CR2_AUTOEND ((uint32_t)0x02000000) /*!< Automatic end mode (master mode) */
+#define I2C_CR2_PECBYTE ((uint32_t)0x04000000) /*!< Packet error checking byte */
+
+/******************* Bit definition for I2C_OAR1 register ******************/
+#define I2C_OAR1_OA1 ((uint32_t)0x000003FF) /*!< Interface own address 1 */
+#define I2C_OAR1_OA1MODE ((uint32_t)0x00000400) /*!< Own address 1 10-bit mode */
+#define I2C_OAR1_OA1EN ((uint32_t)0x00008000) /*!< Own address 1 enable */
+
+/******************* Bit definition for I2C_OAR2 register ******************/
+#define I2C_OAR2_OA2 ((uint32_t)0x000000FE) /*!< Interface own address 2 */
+#define I2C_OAR2_OA2MSK ((uint32_t)0x00000700) /*!< Own address 2 masks */
+#define I2C_OAR2_OA2EN ((uint32_t)0x00008000) /*!< Own address 2 enable */
+
+/******************* Bit definition for I2C_TIMINGR register ****************/
+#define I2C_TIMINGR_SCLL ((uint32_t)0x000000FF) /*!< SCL low period (master mode) */
+#define I2C_TIMINGR_SCLH ((uint32_t)0x0000FF00) /*!< SCL high period (master mode) */
+#define I2C_TIMINGR_SDADEL ((uint32_t)0x000F0000) /*!< Data hold time */
+#define I2C_TIMINGR_SCLDEL ((uint32_t)0x00F00000) /*!< Data setup time */
+#define I2C_TIMINGR_PRESC ((uint32_t)0xF0000000) /*!< Timings prescaler */
+
+/******************* Bit definition for I2C_TIMEOUTR register ****************/
+#define I2C_TIMEOUTR_TIMEOUTA ((uint32_t)0x00000FFF) /*!< Bus timeout A */
+#define I2C_TIMEOUTR_TIDLE ((uint32_t)0x00001000) /*!< Idle clock timeout detection */
+#define I2C_TIMEOUTR_TIMOUTEN ((uint32_t)0x00008000) /*!< Clock timeout enable */
+#define I2C_TIMEOUTR_TIMEOUTB ((uint32_t)0x0FFF0000) /*!< Bus timeout B*/
+#define I2C_TIMEOUTR_TEXTEN ((uint32_t)0x80000000) /*!< Extended clock timeout enable */
+
+/****************** Bit definition for I2C_ISR register ********************/
+#define I2C_ISR_TXE ((uint32_t)0x00000001) /*!< Transmit data register empty */
+#define I2C_ISR_TXIS ((uint32_t)0x00000002) /*!< Transmit interrupt status */
+#define I2C_ISR_RXNE ((uint32_t)0x00000004) /*!< Receive data register not empty */
+#define I2C_ISR_ADDR ((uint32_t)0x00000008) /*!< Address matched (slave mode)*/
+#define I2C_ISR_NACKF ((uint32_t)0x00000010) /*!< NACK received flag */
+#define I2C_ISR_STOPF ((uint32_t)0x00000020) /*!< STOP detection flag */
+#define I2C_ISR_TC ((uint32_t)0x00000040) /*!< Transfer complete (master mode) */
+#define I2C_ISR_TCR ((uint32_t)0x00000080) /*!< Transfer complete reload */
+#define I2C_ISR_BERR ((uint32_t)0x00000100) /*!< Bus error */
+#define I2C_ISR_ARLO ((uint32_t)0x00000200) /*!< Arbitration lost */
+#define I2C_ISR_OVR ((uint32_t)0x00000400) /*!< Overrun/Underrun */
+#define I2C_ISR_PECERR ((uint32_t)0x00000800) /*!< PEC error in reception */
+#define I2C_ISR_TIMEOUT ((uint32_t)0x00001000) /*!< Timeout or Tlow detection flag */
+#define I2C_ISR_ALERT ((uint32_t)0x00002000) /*!< SMBus alert */
+#define I2C_ISR_BUSY ((uint32_t)0x00008000) /*!< Bus busy */
+#define I2C_ISR_DIR ((uint32_t)0x00010000) /*!< Transfer direction (slave mode) */
+#define I2C_ISR_ADDCODE ((uint32_t)0x00FE0000) /*!< Address match code (slave mode) */
+
+/****************** Bit definition for I2C_ICR register ********************/
+#define I2C_ICR_ADDRCF ((uint32_t)0x00000008) /*!< Address matched clear flag */
+#define I2C_ICR_NACKCF ((uint32_t)0x00000010) /*!< NACK clear flag */
+#define I2C_ICR_STOPCF ((uint32_t)0x00000020) /*!< STOP detection clear flag */
+#define I2C_ICR_BERRCF ((uint32_t)0x00000100) /*!< Bus error clear flag */
+#define I2C_ICR_ARLOCF ((uint32_t)0x00000200) /*!< Arbitration lost clear flag */
+#define I2C_ICR_OVRCF ((uint32_t)0x00000400) /*!< Overrun/Underrun clear flag */
+#define I2C_ICR_PECCF ((uint32_t)0x00000800) /*!< PAC error clear flag */
+#define I2C_ICR_TIMOUTCF ((uint32_t)0x00001000) /*!< Timeout clear flag */
+#define I2C_ICR_ALERTCF ((uint32_t)0x00002000) /*!< Alert clear flag */
+
+/****************** Bit definition for I2C_PECR register *******************/
+#define I2C_PECR_PEC ((uint32_t)0x000000FF) /*!< PEC register */
+
+/****************** Bit definition for I2C_RXDR register *********************/
+#define I2C_RXDR_RXDATA ((uint32_t)0x000000FF) /*!< 8-bit receive data */
+
+/****************** Bit definition for I2C_TXDR register *******************/
+#define I2C_TXDR_TXDATA ((uint32_t)0x000000FF) /*!< 8-bit transmit data */
+
+/*****************************************************************************/
+/* */
+/* Independent WATCHDOG (IWDG) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for IWDG_KR register *******************/
+#define IWDG_KR_KEY ((uint32_t)0xFFFF) /*!< Key value (write only, read 0000h) */
+
+/******************* Bit definition for IWDG_PR register *******************/
+#define IWDG_PR_PR ((uint32_t)0x07) /*!< PR[2:0] (Prescaler divider) */
+#define IWDG_PR_PR_0 ((uint32_t)0x01) /*!< Bit 0 */
+#define IWDG_PR_PR_1 ((uint32_t)0x02) /*!< Bit 1 */
+#define IWDG_PR_PR_2 ((uint32_t)0x04) /*!< Bit 2 */
+
+/******************* Bit definition for IWDG_RLR register ******************/
+#define IWDG_RLR_RL ((uint32_t)0x0FFF) /*!< Watchdog counter reload value */
+
+/******************* Bit definition for IWDG_SR register *******************/
+#define IWDG_SR_PVU ((uint32_t)0x01) /*!< Watchdog prescaler value update */
+#define IWDG_SR_RVU ((uint32_t)0x02) /*!< Watchdog counter reload value update */
+#define IWDG_SR_WVU ((uint32_t)0x04) /*!< Watchdog counter window value update */
+
+/******************* Bit definition for IWDG_KR register *******************/
+#define IWDG_WINR_WIN ((uint32_t)0x0FFF) /*!< Watchdog counter window value */
+
+/*****************************************************************************/
+/* */
+/* Power Control (PWR) */
+/* */
+/*****************************************************************************/
+
+/******************** Bit definition for PWR_CR register *******************/
+#define PWR_CR_LPDS ((uint32_t)0x00000001) /*!< Low-power Deepsleep */
+#define PWR_CR_PDDS ((uint32_t)0x00000002) /*!< Power Down Deepsleep */
+#define PWR_CR_CWUF ((uint32_t)0x00000004) /*!< Clear Wakeup Flag */
+#define PWR_CR_CSBF ((uint32_t)0x00000008) /*!< Clear Standby Flag */
+#define PWR_CR_PVDE ((uint32_t)0x00000010) /*!< Power Voltage Detector Enable */
+
+#define PWR_CR_PLS ((uint32_t)0x000000E0) /*!< PLS[2:0] bits (PVD Level Selection) */
+#define PWR_CR_PLS_0 ((uint32_t)0x00000020) /*!< Bit 0 */
+#define PWR_CR_PLS_1 ((uint32_t)0x00000040) /*!< Bit 1 */
+#define PWR_CR_PLS_2 ((uint32_t)0x00000080) /*!< Bit 2 */
+
+/*!< PVD level configuration */
+#define PWR_CR_PLS_LEV0 ((uint32_t)0x00000000) /*!< PVD level 0 */
+#define PWR_CR_PLS_LEV1 ((uint32_t)0x00000020) /*!< PVD level 1 */
+#define PWR_CR_PLS_LEV2 ((uint32_t)0x00000040) /*!< PVD level 2 */
+#define PWR_CR_PLS_LEV3 ((uint32_t)0x00000060) /*!< PVD level 3 */
+#define PWR_CR_PLS_LEV4 ((uint32_t)0x00000080) /*!< PVD level 4 */
+#define PWR_CR_PLS_LEV5 ((uint32_t)0x000000A0) /*!< PVD level 5 */
+#define PWR_CR_PLS_LEV6 ((uint32_t)0x000000C0) /*!< PVD level 6 */
+#define PWR_CR_PLS_LEV7 ((uint32_t)0x000000E0) /*!< PVD level 7 */
+
+#define PWR_CR_DBP ((uint32_t)0x00000100) /*!< Disable Backup Domain write protection */
+
+/******************* Bit definition for PWR_CSR register *******************/
+#define PWR_CSR_WUF ((uint32_t)0x00000001) /*!< Wakeup Flag */
+#define PWR_CSR_SBF ((uint32_t)0x00000002) /*!< Standby Flag */
+#define PWR_CSR_PVDO ((uint32_t)0x00000004) /*!< PVD Output */
+#define PWR_CSR_VREFINTRDYF ((uint32_t)0x00000008) /*!< Internal voltage reference (VREFINT) ready flag */
+
+#define PWR_CSR_EWUP1 ((uint32_t)0x00000100) /*!< Enable WKUP pin 1 */
+#define PWR_CSR_EWUP2 ((uint32_t)0x00000200) /*!< Enable WKUP pin 2 */
+
+/*****************************************************************************/
+/* */
+/* Reset and Clock Control */
+/* */
+/*****************************************************************************/
+
+/******************** Bit definition for RCC_CR register *******************/
+#define RCC_CR_HSION ((uint32_t)0x00000001) /*!< Internal High Speed clock enable */
+#define RCC_CR_HSIRDY ((uint32_t)0x00000002) /*!< Internal High Speed clock ready flag */
+
+#define RCC_CR_HSITRIM ((uint32_t)0x000000F8) /*!< Internal High Speed clock trimming */
+#define RCC_CR_HSITRIM_0 ((uint32_t)0x00000008) /*!<Bit 0 */
+#define RCC_CR_HSITRIM_1 ((uint32_t)0x00000010) /*!<Bit 1 */
+#define RCC_CR_HSITRIM_2 ((uint32_t)0x00000020) /*!<Bit 2 */
+#define RCC_CR_HSITRIM_3 ((uint32_t)0x00000040) /*!<Bit 3 */
+#define RCC_CR_HSITRIM_4 ((uint32_t)0x00000080) /*!<Bit 4 */
+
+#define RCC_CR_HSICAL ((uint32_t)0x0000FF00) /*!< Internal High Speed clock Calibration */
+#define RCC_CR_HSICAL_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define RCC_CR_HSICAL_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define RCC_CR_HSICAL_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define RCC_CR_HSICAL_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define RCC_CR_HSICAL_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+#define RCC_CR_HSICAL_5 ((uint32_t)0x00002000) /*!<Bit 5 */
+#define RCC_CR_HSICAL_6 ((uint32_t)0x00004000) /*!<Bit 6 */
+#define RCC_CR_HSICAL_7 ((uint32_t)0x00008000) /*!<Bit 7 */
+
+#define RCC_CR_HSEON ((uint32_t)0x00010000) /*!< External High Speed clock enable */
+#define RCC_CR_HSERDY ((uint32_t)0x00020000) /*!< External High Speed clock ready flag */
+#define RCC_CR_HSEBYP ((uint32_t)0x00040000) /*!< External High Speed clock Bypass */
+#define RCC_CR_CSSON ((uint32_t)0x00080000) /*!< Clock Security System enable */
+#define RCC_CR_PLLON ((uint32_t)0x01000000) /*!< PLL enable */
+#define RCC_CR_PLLRDY ((uint32_t)0x02000000) /*!< PLL clock ready flag */
+
+/******************** Bit definition for RCC_CFGR register *****************/
+/*!< SW configuration */
+#define RCC_CFGR_SW ((uint32_t)0x00000003) /*!< SW[1:0] bits (System clock Switch) */
+#define RCC_CFGR_SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR_SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+#define RCC_CFGR_SW_HSI ((uint32_t)0x00000000) /*!< HSI selected as system clock */
+#define RCC_CFGR_SW_HSE ((uint32_t)0x00000001) /*!< HSE selected as system clock */
+#define RCC_CFGR_SW_PLL ((uint32_t)0x00000002) /*!< PLL selected as system clock */
+
+/*!< SWS configuration */
+#define RCC_CFGR_SWS ((uint32_t)0x0000000C) /*!< SWS[1:0] bits (System Clock Switch Status) */
+#define RCC_CFGR_SWS_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define RCC_CFGR_SWS_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+
+#define RCC_CFGR_SWS_HSI ((uint32_t)0x00000000) /*!< HSI oscillator used as system clock */
+#define RCC_CFGR_SWS_HSE ((uint32_t)0x00000004) /*!< HSE oscillator used as system clock */
+#define RCC_CFGR_SWS_PLL ((uint32_t)0x00000008) /*!< PLL used as system clock */
+
+/*!< HPRE configuration */
+#define RCC_CFGR_HPRE ((uint32_t)0x000000F0) /*!< HPRE[3:0] bits (AHB prescaler) */
+#define RCC_CFGR_HPRE_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define RCC_CFGR_HPRE_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define RCC_CFGR_HPRE_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+#define RCC_CFGR_HPRE_3 ((uint32_t)0x00000080) /*!< Bit 3 */
+
+#define RCC_CFGR_HPRE_DIV1 ((uint32_t)0x00000000) /*!< SYSCLK not divided */
+#define RCC_CFGR_HPRE_DIV2 ((uint32_t)0x00000080) /*!< SYSCLK divided by 2 */
+#define RCC_CFGR_HPRE_DIV4 ((uint32_t)0x00000090) /*!< SYSCLK divided by 4 */
+#define RCC_CFGR_HPRE_DIV8 ((uint32_t)0x000000A0) /*!< SYSCLK divided by 8 */
+#define RCC_CFGR_HPRE_DIV16 ((uint32_t)0x000000B0) /*!< SYSCLK divided by 16 */
+#define RCC_CFGR_HPRE_DIV64 ((uint32_t)0x000000C0) /*!< SYSCLK divided by 64 */
+#define RCC_CFGR_HPRE_DIV128 ((uint32_t)0x000000D0) /*!< SYSCLK divided by 128 */
+#define RCC_CFGR_HPRE_DIV256 ((uint32_t)0x000000E0) /*!< SYSCLK divided by 256 */
+#define RCC_CFGR_HPRE_DIV512 ((uint32_t)0x000000F0) /*!< SYSCLK divided by 512 */
+
+/*!< PPRE configuration */
+#define RCC_CFGR_PPRE ((uint32_t)0x00000700) /*!< PRE[2:0] bits (APB prescaler) */
+#define RCC_CFGR_PPRE_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define RCC_CFGR_PPRE_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define RCC_CFGR_PPRE_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+
+#define RCC_CFGR_PPRE_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */
+#define RCC_CFGR_PPRE_DIV2 ((uint32_t)0x00000400) /*!< HCLK divided by 2 */
+#define RCC_CFGR_PPRE_DIV4 ((uint32_t)0x00000500) /*!< HCLK divided by 4 */
+#define RCC_CFGR_PPRE_DIV8 ((uint32_t)0x00000600) /*!< HCLK divided by 8 */
+#define RCC_CFGR_PPRE_DIV16 ((uint32_t)0x00000700) /*!< HCLK divided by 16 */
+
+/*!< ADCPPRE configuration */
+#define RCC_CFGR_ADCPRE ((uint32_t)0x00004000) /*!< ADCPRE bit (ADC prescaler) */
+
+#define RCC_CFGR_ADCPRE_DIV2 ((uint32_t)0x00000000) /*!< PCLK divided by 2 */
+#define RCC_CFGR_ADCPRE_DIV4 ((uint32_t)0x00004000) /*!< PCLK divided by 4 */
+
+#define RCC_CFGR_PLLSRC ((uint32_t)0x00010000) /*!< PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSI_DIV2 ((uint32_t)0x00000000) /*!< HSI clock divided by 2 selected as PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSE_PREDIV ((uint32_t)0x00010000) /*!< HSE/PREDIV clock selected as PLL entry clock source */
+
+#define RCC_CFGR_PLLXTPRE ((uint32_t)0x00020000) /*!< HSE divider for PLL entry */
+#define RCC_CFGR_PLLXTPRE_HSE_PREDIV_DIV1 ((uint32_t)0x00000000) /*!< HSE/PREDIV clock not divided for PLL entry */
+#define RCC_CFGR_PLLXTPRE_HSE_PREDIV_DIV2 ((uint32_t)0x00020000) /*!< HSE/PREDIV clock divided by 2 for PLL entry */
+
+/*!< PLLMUL configuration */
+#define RCC_CFGR_PLLMUL ((uint32_t)0x003C0000) /*!< PLLMUL[3:0] bits (PLL multiplication factor) */
+#define RCC_CFGR_PLLMUL_0 ((uint32_t)0x00040000) /*!< Bit 0 */
+#define RCC_CFGR_PLLMUL_1 ((uint32_t)0x00080000) /*!< Bit 1 */
+#define RCC_CFGR_PLLMUL_2 ((uint32_t)0x00100000) /*!< Bit 2 */
+#define RCC_CFGR_PLLMUL_3 ((uint32_t)0x00200000) /*!< Bit 3 */
+
+#define RCC_CFGR_PLLMUL2 ((uint32_t)0x00000000) /*!< PLL input clock*2 */
+#define RCC_CFGR_PLLMUL3 ((uint32_t)0x00040000) /*!< PLL input clock*3 */
+#define RCC_CFGR_PLLMUL4 ((uint32_t)0x00080000) /*!< PLL input clock*4 */
+#define RCC_CFGR_PLLMUL5 ((uint32_t)0x000C0000) /*!< PLL input clock*5 */
+#define RCC_CFGR_PLLMUL6 ((uint32_t)0x00100000) /*!< PLL input clock*6 */
+#define RCC_CFGR_PLLMUL7 ((uint32_t)0x00140000) /*!< PLL input clock*7 */
+#define RCC_CFGR_PLLMUL8 ((uint32_t)0x00180000) /*!< PLL input clock*8 */
+#define RCC_CFGR_PLLMUL9 ((uint32_t)0x001C0000) /*!< PLL input clock*9 */
+#define RCC_CFGR_PLLMUL10 ((uint32_t)0x00200000) /*!< PLL input clock10 */
+#define RCC_CFGR_PLLMUL11 ((uint32_t)0x00240000) /*!< PLL input clock*11 */
+#define RCC_CFGR_PLLMUL12 ((uint32_t)0x00280000) /*!< PLL input clock*12 */
+#define RCC_CFGR_PLLMUL13 ((uint32_t)0x002C0000) /*!< PLL input clock*13 */
+#define RCC_CFGR_PLLMUL14 ((uint32_t)0x00300000) /*!< PLL input clock*14 */
+#define RCC_CFGR_PLLMUL15 ((uint32_t)0x00340000) /*!< PLL input clock*15 */
+#define RCC_CFGR_PLLMUL16 ((uint32_t)0x00380000) /*!< PLL input clock*16 */
+
+/*!< MCO configuration */
+#define RCC_CFGR_MCO ((uint32_t)0x0F000000) /*!< MCO[3:0] bits (Microcontroller Clock Output) */
+#define RCC_CFGR_MCO_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define RCC_CFGR_MCO_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define RCC_CFGR_MCO_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+#define RCC_CFGR_MCO_3 ((uint32_t)0x08000000) /*!< Bit 3 */
+
+#define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
+#define RCC_CFGR_MCO_HSI14 ((uint32_t)0x01000000) /*!< HSI14 clock selected as MCO source */
+#define RCC_CFGR_MCO_LSI ((uint32_t)0x02000000) /*!< LSI clock selected as MCO source */
+#define RCC_CFGR_MCO_LSE ((uint32_t)0x03000000) /*!< LSE clock selected as MCO source */
+#define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x04000000) /*!< System clock selected as MCO source */
+#define RCC_CFGR_MCO_HSI ((uint32_t)0x05000000) /*!< HSI clock selected as MCO source */
+#define RCC_CFGR_MCO_HSE ((uint32_t)0x06000000) /*!< HSE clock selected as MCO source */
+#define RCC_CFGR_MCO_PLL ((uint32_t)0x07000000) /*!< PLL clock divided by 2 selected as MCO source */
+
+#define RCC_CFGR_MCOPRE ((uint32_t)0x70000000) /*!< MCO prescaler */
+#define RCC_CFGR_MCOPRE_DIV1 ((uint32_t)0x00000000) /*!< MCO is divided by 1 */
+#define RCC_CFGR_MCOPRE_DIV2 ((uint32_t)0x10000000) /*!< MCO is divided by 2 */
+#define RCC_CFGR_MCOPRE_DIV4 ((uint32_t)0x20000000) /*!< MCO is divided by 4 */
+#define RCC_CFGR_MCOPRE_DIV8 ((uint32_t)0x30000000) /*!< MCO is divided by 8 */
+#define RCC_CFGR_MCOPRE_DIV16 ((uint32_t)0x40000000) /*!< MCO is divided by 16 */
+#define RCC_CFGR_MCOPRE_DIV32 ((uint32_t)0x50000000) /*!< MCO is divided by 32 */
+#define RCC_CFGR_MCOPRE_DIV64 ((uint32_t)0x60000000) /*!< MCO is divided by 64 */
+#define RCC_CFGR_MCOPRE_DIV128 ((uint32_t)0x70000000) /*!< MCO is divided by 128 */
+
+#define RCC_CFGR_PLLNODIV ((uint32_t)0x80000000) /*!< PLL is not divided to MCO */
+
+/*!<****************** Bit definition for RCC_CIR register *****************/
+#define RCC_CIR_LSIRDYF ((uint32_t)0x00000001) /*!< LSI Ready Interrupt flag */
+#define RCC_CIR_LSERDYF ((uint32_t)0x00000002) /*!< LSE Ready Interrupt flag */
+#define RCC_CIR_HSIRDYF ((uint32_t)0x00000004) /*!< HSI Ready Interrupt flag */
+#define RCC_CIR_HSERDYF ((uint32_t)0x00000008) /*!< HSE Ready Interrupt flag */
+#define RCC_CIR_PLLRDYF ((uint32_t)0x00000010) /*!< PLL Ready Interrupt flag */
+#define RCC_CIR_HSI14RDYF ((uint32_t)0x00000020) /*!< HSI14 Ready Interrupt flag */
+#define RCC_CIR_CSSF ((uint32_t)0x00000080) /*!< Clock Security System Interrupt flag */
+#define RCC_CIR_LSIRDYIE ((uint32_t)0x00000100) /*!< LSI Ready Interrupt Enable */
+#define RCC_CIR_LSERDYIE ((uint32_t)0x00000200) /*!< LSE Ready Interrupt Enable */
+#define RCC_CIR_HSIRDYIE ((uint32_t)0x00000400) /*!< HSI Ready Interrupt Enable */
+#define RCC_CIR_HSERDYIE ((uint32_t)0x00000800) /*!< HSE Ready Interrupt Enable */
+#define RCC_CIR_PLLRDYIE ((uint32_t)0x00001000) /*!< PLL Ready Interrupt Enable */
+#define RCC_CIR_HSI14RDYIE ((uint32_t)0x00002000) /*!< HSI14 Ready Interrupt Enable */
+#define RCC_CIR_LSIRDYC ((uint32_t)0x00010000) /*!< LSI Ready Interrupt Clear */
+#define RCC_CIR_LSERDYC ((uint32_t)0x00020000) /*!< LSE Ready Interrupt Clear */
+#define RCC_CIR_HSIRDYC ((uint32_t)0x00040000) /*!< HSI Ready Interrupt Clear */
+#define RCC_CIR_HSERDYC ((uint32_t)0x00080000) /*!< HSE Ready Interrupt Clear */
+#define RCC_CIR_PLLRDYC ((uint32_t)0x00100000) /*!< PLL Ready Interrupt Clear */
+#define RCC_CIR_HSI14RDYC ((uint32_t)0x00200000) /*!< HSI14 Ready Interrupt Clear */
+#define RCC_CIR_CSSC ((uint32_t)0x00800000) /*!< Clock Security System Interrupt Clear */
+
+/***************** Bit definition for RCC_APB2RSTR register ****************/
+#define RCC_APB2RSTR_SYSCFGRST ((uint32_t)0x00000001) /*!< SYSCFG clock reset */
+#define RCC_APB2RSTR_ADCRST ((uint32_t)0x00000200) /*!< ADC clock reset */
+#define RCC_APB2RSTR_TIM1RST ((uint32_t)0x00000800) /*!< TIM1 clock reset */
+#define RCC_APB2RSTR_SPI1RST ((uint32_t)0x00001000) /*!< SPI1 clock reset */
+#define RCC_APB2RSTR_USART1RST ((uint32_t)0x00004000) /*!< USART1 clock reset */
+#define RCC_APB2RSTR_TIM16RST ((uint32_t)0x00020000) /*!< TIM16 clock reset */
+#define RCC_APB2RSTR_TIM17RST ((uint32_t)0x00040000) /*!< TIM17 clock reset */
+#define RCC_APB2RSTR_DBGMCURST ((uint32_t)0x00400000) /*!< DBGMCU clock reset */
+
+/*!< Old ADC1 clock reset bit definition maintained for legacy purpose */
+#define RCC_APB2RSTR_ADC1RST RCC_APB2RSTR_ADCRST
+
+/***************** Bit definition for RCC_APB1RSTR register ****************/
+#define RCC_APB1RSTR_TIM2RST ((uint32_t)0x00000001) /*!< Timer 2 clock reset */
+#define RCC_APB1RSTR_TIM3RST ((uint32_t)0x00000002) /*!< Timer 3 clock reset */
+#define RCC_APB1RSTR_TIM14RST ((uint32_t)0x00000100) /*!< Timer 14 clock reset */
+#define RCC_APB1RSTR_WWDGRST ((uint32_t)0x00000800) /*!< Window Watchdog clock reset */
+#define RCC_APB1RSTR_I2C1RST ((uint32_t)0x00200000) /*!< I2C 1 clock reset */
+#define RCC_APB1RSTR_PWRRST ((uint32_t)0x10000000) /*!< PWR clock reset */
+
+/****************** Bit definition for RCC_AHBENR register *****************/
+#define RCC_AHBENR_DMAEN ((uint32_t)0x00000001) /*!< DMA1 clock enable */
+#define RCC_AHBENR_SRAMEN ((uint32_t)0x00000004) /*!< SRAM interface clock enable */
+#define RCC_AHBENR_FLITFEN ((uint32_t)0x00000010) /*!< FLITF clock enable */
+#define RCC_AHBENR_CRCEN ((uint32_t)0x00000040) /*!< CRC clock enable */
+#define RCC_AHBENR_GPIOAEN ((uint32_t)0x00020000) /*!< GPIOA clock enable */
+#define RCC_AHBENR_GPIOBEN ((uint32_t)0x00040000) /*!< GPIOB clock enable */
+#define RCC_AHBENR_GPIOCEN ((uint32_t)0x00080000) /*!< GPIOC clock enable */
+#define RCC_AHBENR_GPIODEN ((uint32_t)0x00100000) /*!< GPIOD clock enable */
+#define RCC_AHBENR_GPIOFEN ((uint32_t)0x00400000) /*!< GPIOF clock enable */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_AHBENR_DMA1EN RCC_AHBENR_DMAEN /*!< DMA1 clock enable */
+#define RCC_AHBENR_TSEN RCC_AHBENR_TSCEN /*!< TS clock enable */
+
+/***************** Bit definition for RCC_APB2ENR register *****************/
+#define RCC_APB2ENR_SYSCFGCOMPEN ((uint32_t)0x00000001) /*!< SYSCFG and comparator clock enable */
+#define RCC_APB2ENR_ADCEN ((uint32_t)0x00000200) /*!< ADC1 clock enable */
+#define RCC_APB2ENR_TIM1EN ((uint32_t)0x00000800) /*!< TIM1 clock enable */
+#define RCC_APB2ENR_SPI1EN ((uint32_t)0x00001000) /*!< SPI1 clock enable */
+#define RCC_APB2ENR_USART1EN ((uint32_t)0x00004000) /*!< USART1 clock enable */
+#define RCC_APB2ENR_TIM16EN ((uint32_t)0x00020000) /*!< TIM16 clock enable */
+#define RCC_APB2ENR_TIM17EN ((uint32_t)0x00040000) /*!< TIM17 clock enable */
+#define RCC_APB2ENR_DBGMCUEN ((uint32_t)0x00400000) /*!< DBGMCU clock enable */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_APB2ENR_SYSCFGEN RCC_APB2ENR_SYSCFGCOMPEN /*!< SYSCFG clock enable */
+#define RCC_APB2ENR_ADC1EN RCC_APB2ENR_ADCEN /*!< ADC1 clock enable */
+
+/***************** Bit definition for RCC_APB1ENR register *****************/
+#define RCC_APB1ENR_TIM2EN ((uint32_t)0x00000001) /*!< Timer 2 clock enable */
+#define RCC_APB1ENR_TIM3EN ((uint32_t)0x00000002) /*!< Timer 3 clock enable */
+#define RCC_APB1ENR_TIM14EN ((uint32_t)0x00000100) /*!< Timer 14 clock enable */
+#define RCC_APB1ENR_WWDGEN ((uint32_t)0x00000800) /*!< Window Watchdog clock enable */
+#define RCC_APB1ENR_I2C1EN ((uint32_t)0x00200000) /*!< I2C1 clock enable */
+#define RCC_APB1ENR_PWREN ((uint32_t)0x10000000) /*!< PWR clock enable */
+
+/******************* Bit definition for RCC_BDCR register ******************/
+#define RCC_BDCR_LSEON ((uint32_t)0x00000001) /*!< External Low Speed oscillator enable */
+#define RCC_BDCR_LSERDY ((uint32_t)0x00000002) /*!< External Low Speed oscillator Ready */
+#define RCC_BDCR_LSEBYP ((uint32_t)0x00000004) /*!< External Low Speed oscillator Bypass */
+
+#define RCC_BDCR_LSEDRV ((uint32_t)0x00000018) /*!< LSEDRV[1:0] bits (LSE Osc. drive capability) */
+#define RCC_BDCR_LSEDRV_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define RCC_BDCR_LSEDRV_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+
+#define RCC_BDCR_RTCSEL ((uint32_t)0x00000300) /*!< RTCSEL[1:0] bits (RTC clock source selection) */
+#define RCC_BDCR_RTCSEL_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define RCC_BDCR_RTCSEL_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+
+/*!< RTC configuration */
+#define RCC_BDCR_RTCSEL_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
+#define RCC_BDCR_RTCSEL_LSE ((uint32_t)0x00000100) /*!< LSE oscillator clock used as RTC clock */
+#define RCC_BDCR_RTCSEL_LSI ((uint32_t)0x00000200) /*!< LSI oscillator clock used as RTC clock */
+#define RCC_BDCR_RTCSEL_HSE ((uint32_t)0x00000300) /*!< HSE oscillator clock divided by 128 used as RTC clock */
+
+#define RCC_BDCR_RTCEN ((uint32_t)0x00008000) /*!< RTC clock enable */
+#define RCC_BDCR_BDRST ((uint32_t)0x00010000) /*!< Backup domain software reset */
+
+/******************* Bit definition for RCC_CSR register *******************/
+#define RCC_CSR_LSION ((uint32_t)0x00000001) /*!< Internal Low Speed oscillator enable */
+#define RCC_CSR_LSIRDY ((uint32_t)0x00000002) /*!< Internal Low Speed oscillator Ready */
+#define RCC_CSR_V18PWRRSTF ((uint32_t)0x00800000) /*!< V1.8 power domain reset flag */
+#define RCC_CSR_RMVF ((uint32_t)0x01000000) /*!< Remove reset flag */
+#define RCC_CSR_OBLRSTF ((uint32_t)0x02000000) /*!< OBL reset flag */
+#define RCC_CSR_PINRSTF ((uint32_t)0x04000000) /*!< PIN reset flag */
+#define RCC_CSR_PORRSTF ((uint32_t)0x08000000) /*!< POR/PDR reset flag */
+#define RCC_CSR_SFTRSTF ((uint32_t)0x10000000) /*!< Software Reset flag */
+#define RCC_CSR_IWDGRSTF ((uint32_t)0x20000000) /*!< Independent Watchdog reset flag */
+#define RCC_CSR_WWDGRSTF ((uint32_t)0x40000000) /*!< Window watchdog reset flag */
+#define RCC_CSR_LPWRRSTF ((uint32_t)0x80000000) /*!< Low-Power reset flag */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_CSR_OBL RCC_CSR_OBLRSTF /*!< OBL reset flag */
+
+/******************* Bit definition for RCC_AHBRSTR register ***************/
+#define RCC_AHBRSTR_GPIOARST ((uint32_t)0x00020000) /*!< GPIOA clock reset */
+#define RCC_AHBRSTR_GPIOBRST ((uint32_t)0x00040000) /*!< GPIOB clock reset */
+#define RCC_AHBRSTR_GPIOCRST ((uint32_t)0x00080000) /*!< GPIOC clock reset */
+#define RCC_AHBRSTR_GPIODRST ((uint32_t)0x00100000) /*!< GPIOD clock reset */
+#define RCC_AHBRSTR_GPIOFRST ((uint32_t)0x00400000) /*!< GPIOF clock reset */
+
+/******************* Bit definition for RCC_CFGR2 register *****************/
+/*!< PREDIV configuration */
+#define RCC_CFGR2_PREDIV ((uint32_t)0x0000000F) /*!< PREDIV[3:0] bits */
+#define RCC_CFGR2_PREDIV_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR2_PREDIV_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define RCC_CFGR2_PREDIV_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define RCC_CFGR2_PREDIV_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+
+#define RCC_CFGR2_PREDIV_DIV1 ((uint32_t)0x00000000) /*!< PREDIV input clock not divided */
+#define RCC_CFGR2_PREDIV_DIV2 ((uint32_t)0x00000001) /*!< PREDIV input clock divided by 2 */
+#define RCC_CFGR2_PREDIV_DIV3 ((uint32_t)0x00000002) /*!< PREDIV input clock divided by 3 */
+#define RCC_CFGR2_PREDIV_DIV4 ((uint32_t)0x00000003) /*!< PREDIV input clock divided by 4 */
+#define RCC_CFGR2_PREDIV_DIV5 ((uint32_t)0x00000004) /*!< PREDIV input clock divided by 5 */
+#define RCC_CFGR2_PREDIV_DIV6 ((uint32_t)0x00000005) /*!< PREDIV input clock divided by 6 */
+#define RCC_CFGR2_PREDIV_DIV7 ((uint32_t)0x00000006) /*!< PREDIV input clock divided by 7 */
+#define RCC_CFGR2_PREDIV_DIV8 ((uint32_t)0x00000007) /*!< PREDIV input clock divided by 8 */
+#define RCC_CFGR2_PREDIV_DIV9 ((uint32_t)0x00000008) /*!< PREDIV input clock divided by 9 */
+#define RCC_CFGR2_PREDIV_DIV10 ((uint32_t)0x00000009) /*!< PREDIV input clock divided by 10 */
+#define RCC_CFGR2_PREDIV_DIV11 ((uint32_t)0x0000000A) /*!< PREDIV input clock divided by 11 */
+#define RCC_CFGR2_PREDIV_DIV12 ((uint32_t)0x0000000B) /*!< PREDIV input clock divided by 12 */
+#define RCC_CFGR2_PREDIV_DIV13 ((uint32_t)0x0000000C) /*!< PREDIV input clock divided by 13 */
+#define RCC_CFGR2_PREDIV_DIV14 ((uint32_t)0x0000000D) /*!< PREDIV input clock divided by 14 */
+#define RCC_CFGR2_PREDIV_DIV15 ((uint32_t)0x0000000E) /*!< PREDIV input clock divided by 15 */
+#define RCC_CFGR2_PREDIV_DIV16 ((uint32_t)0x0000000F) /*!< PREDIV input clock divided by 16 */
+
+/******************* Bit definition for RCC_CFGR3 register *****************/
+/*!< USART1 Clock source selection */
+#define RCC_CFGR3_USART1SW ((uint32_t)0x00000003) /*!< USART1SW[1:0] bits */
+#define RCC_CFGR3_USART1SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR3_USART1SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+#define RCC_CFGR3_USART1SW_PCLK ((uint32_t)0x00000000) /*!< PCLK clock used as USART1 clock source */
+#define RCC_CFGR3_USART1SW_SYSCLK ((uint32_t)0x00000001) /*!< System clock selected as USART1 clock source */
+#define RCC_CFGR3_USART1SW_LSE ((uint32_t)0x00000002) /*!< LSE oscillator clock used as USART1 clock source */
+#define RCC_CFGR3_USART1SW_HSI ((uint32_t)0x00000003) /*!< HSI oscillator clock used as USART1 clock source */
+
+/*!< I2C1 Clock source selection */
+#define RCC_CFGR3_I2C1SW ((uint32_t)0x00000010) /*!< I2C1SW bits */
+
+#define RCC_CFGR3_I2C1SW_HSI ((uint32_t)0x00000000) /*!< HSI oscillator clock used as I2C1 clock source */
+#define RCC_CFGR3_I2C1SW_SYSCLK ((uint32_t)0x00000010) /*!< System clock selected as I2C1 clock source */
+
+/******************* Bit definition for RCC_CR2 register *******************/
+#define RCC_CR2_HSI14ON ((uint32_t)0x00000001) /*!< Internal High Speed 14MHz clock enable */
+#define RCC_CR2_HSI14RDY ((uint32_t)0x00000002) /*!< Internal High Speed 14MHz clock ready flag */
+#define RCC_CR2_HSI14DIS ((uint32_t)0x00000004) /*!< Internal High Speed 14MHz clock disable */
+#define RCC_CR2_HSI14TRIM ((uint32_t)0x000000F8) /*!< Internal High Speed 14MHz clock trimming */
+#define RCC_CR2_HSI14CAL ((uint32_t)0x0000FF00) /*!< Internal High Speed 14MHz clock Calibration */
+
+/*****************************************************************************/
+/* */
+/* Real-Time Clock (RTC) */
+/* */
+/*****************************************************************************/
+/******************** Bits definition for RTC_TR register ******************/
+#define RTC_TR_PM ((uint32_t)0x00400000)
+#define RTC_TR_HT ((uint32_t)0x00300000)
+#define RTC_TR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TR_HU ((uint32_t)0x000F0000)
+#define RTC_TR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TR_MNT ((uint32_t)0x00007000)
+#define RTC_TR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TR_MNU ((uint32_t)0x00000F00)
+#define RTC_TR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TR_ST ((uint32_t)0x00000070)
+#define RTC_TR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TR_SU ((uint32_t)0x0000000F)
+#define RTC_TR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_DR register ******************/
+#define RTC_DR_YT ((uint32_t)0x00F00000)
+#define RTC_DR_YT_0 ((uint32_t)0x00100000)
+#define RTC_DR_YT_1 ((uint32_t)0x00200000)
+#define RTC_DR_YT_2 ((uint32_t)0x00400000)
+#define RTC_DR_YT_3 ((uint32_t)0x00800000)
+#define RTC_DR_YU ((uint32_t)0x000F0000)
+#define RTC_DR_YU_0 ((uint32_t)0x00010000)
+#define RTC_DR_YU_1 ((uint32_t)0x00020000)
+#define RTC_DR_YU_2 ((uint32_t)0x00040000)
+#define RTC_DR_YU_3 ((uint32_t)0x00080000)
+#define RTC_DR_WDU ((uint32_t)0x0000E000)
+#define RTC_DR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_DR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_DR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_DR_MT ((uint32_t)0x00001000)
+#define RTC_DR_MU ((uint32_t)0x00000F00)
+#define RTC_DR_MU_0 ((uint32_t)0x00000100)
+#define RTC_DR_MU_1 ((uint32_t)0x00000200)
+#define RTC_DR_MU_2 ((uint32_t)0x00000400)
+#define RTC_DR_MU_3 ((uint32_t)0x00000800)
+#define RTC_DR_DT ((uint32_t)0x00000030)
+#define RTC_DR_DT_0 ((uint32_t)0x00000010)
+#define RTC_DR_DT_1 ((uint32_t)0x00000020)
+#define RTC_DR_DU ((uint32_t)0x0000000F)
+#define RTC_DR_DU_0 ((uint32_t)0x00000001)
+#define RTC_DR_DU_1 ((uint32_t)0x00000002)
+#define RTC_DR_DU_2 ((uint32_t)0x00000004)
+#define RTC_DR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_CR register ******************/
+#define RTC_CR_COE ((uint32_t)0x00800000)
+#define RTC_CR_OSEL ((uint32_t)0x00600000)
+#define RTC_CR_OSEL_0 ((uint32_t)0x00200000)
+#define RTC_CR_OSEL_1 ((uint32_t)0x00400000)
+#define RTC_CR_POL ((uint32_t)0x00100000)
+#define RTC_CR_COSEL ((uint32_t)0x00080000)
+#define RTC_CR_BCK ((uint32_t)0x00040000)
+#define RTC_CR_SUB1H ((uint32_t)0x00020000)
+#define RTC_CR_ADD1H ((uint32_t)0x00010000)
+#define RTC_CR_TSIE ((uint32_t)0x00008000)
+#define RTC_CR_ALRAIE ((uint32_t)0x00001000)
+#define RTC_CR_TSE ((uint32_t)0x00000800)
+#define RTC_CR_ALRAE ((uint32_t)0x00000100)
+#define RTC_CR_FMT ((uint32_t)0x00000040)
+#define RTC_CR_BYPSHAD ((uint32_t)0x00000020)
+#define RTC_CR_REFCKON ((uint32_t)0x00000010)
+#define RTC_CR_TSEDGE ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_ISR register *****************/
+#define RTC_ISR_RECALPF ((uint32_t)0x00010000)
+#define RTC_ISR_TAMP2F ((uint32_t)0x00004000)
+#define RTC_ISR_TAMP1F ((uint32_t)0x00002000)
+#define RTC_ISR_TSOVF ((uint32_t)0x00001000)
+#define RTC_ISR_TSF ((uint32_t)0x00000800)
+#define RTC_ISR_ALRAF ((uint32_t)0x00000100)
+#define RTC_ISR_INIT ((uint32_t)0x00000080)
+#define RTC_ISR_INITF ((uint32_t)0x00000040)
+#define RTC_ISR_RSF ((uint32_t)0x00000020)
+#define RTC_ISR_INITS ((uint32_t)0x00000010)
+#define RTC_ISR_SHPF ((uint32_t)0x00000008)
+#define RTC_ISR_ALRAWF ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_PRER register ****************/
+#define RTC_PRER_PREDIV_A ((uint32_t)0x007F0000)
+#define RTC_PRER_PREDIV_S ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_ALRMAR register **************/
+#define RTC_ALRMAR_MSK4 ((uint32_t)0x80000000)
+#define RTC_ALRMAR_WDSEL ((uint32_t)0x40000000)
+#define RTC_ALRMAR_DT ((uint32_t)0x30000000)
+#define RTC_ALRMAR_DT_0 ((uint32_t)0x10000000)
+#define RTC_ALRMAR_DT_1 ((uint32_t)0x20000000)
+#define RTC_ALRMAR_DU ((uint32_t)0x0F000000)
+#define RTC_ALRMAR_DU_0 ((uint32_t)0x01000000)
+#define RTC_ALRMAR_DU_1 ((uint32_t)0x02000000)
+#define RTC_ALRMAR_DU_2 ((uint32_t)0x04000000)
+#define RTC_ALRMAR_DU_3 ((uint32_t)0x08000000)
+#define RTC_ALRMAR_MSK3 ((uint32_t)0x00800000)
+#define RTC_ALRMAR_PM ((uint32_t)0x00400000)
+#define RTC_ALRMAR_HT ((uint32_t)0x00300000)
+#define RTC_ALRMAR_HT_0 ((uint32_t)0x00100000)
+#define RTC_ALRMAR_HT_1 ((uint32_t)0x00200000)
+#define RTC_ALRMAR_HU ((uint32_t)0x000F0000)
+#define RTC_ALRMAR_HU_0 ((uint32_t)0x00010000)
+#define RTC_ALRMAR_HU_1 ((uint32_t)0x00020000)
+#define RTC_ALRMAR_HU_2 ((uint32_t)0x00040000)
+#define RTC_ALRMAR_HU_3 ((uint32_t)0x00080000)
+#define RTC_ALRMAR_MSK2 ((uint32_t)0x00008000)
+#define RTC_ALRMAR_MNT ((uint32_t)0x00007000)
+#define RTC_ALRMAR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_ALRMAR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_ALRMAR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_ALRMAR_MNU ((uint32_t)0x00000F00)
+#define RTC_ALRMAR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_ALRMAR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_ALRMAR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_ALRMAR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_ALRMAR_MSK1 ((uint32_t)0x00000080)
+#define RTC_ALRMAR_ST ((uint32_t)0x00000070)
+#define RTC_ALRMAR_ST_0 ((uint32_t)0x00000010)
+#define RTC_ALRMAR_ST_1 ((uint32_t)0x00000020)
+#define RTC_ALRMAR_ST_2 ((uint32_t)0x00000040)
+#define RTC_ALRMAR_SU ((uint32_t)0x0000000F)
+#define RTC_ALRMAR_SU_0 ((uint32_t)0x00000001)
+#define RTC_ALRMAR_SU_1 ((uint32_t)0x00000002)
+#define RTC_ALRMAR_SU_2 ((uint32_t)0x00000004)
+#define RTC_ALRMAR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_WPR register *****************/
+#define RTC_WPR_KEY ((uint32_t)0x000000FF)
+
+/******************** Bits definition for RTC_SSR register *****************/
+#define RTC_SSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_SHIFTR register **************/
+#define RTC_SHIFTR_SUBFS ((uint32_t)0x00007FFF)
+#define RTC_SHIFTR_ADD1S ((uint32_t)0x80000000)
+
+/******************** Bits definition for RTC_TSTR register ****************/
+#define RTC_TSTR_PM ((uint32_t)0x00400000)
+#define RTC_TSTR_HT ((uint32_t)0x00300000)
+#define RTC_TSTR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TSTR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TSTR_HU ((uint32_t)0x000F0000)
+#define RTC_TSTR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TSTR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TSTR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TSTR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TSTR_MNT ((uint32_t)0x00007000)
+#define RTC_TSTR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TSTR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TSTR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TSTR_MNU ((uint32_t)0x00000F00)
+#define RTC_TSTR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TSTR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TSTR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TSTR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TSTR_ST ((uint32_t)0x00000070)
+#define RTC_TSTR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TSTR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TSTR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TSTR_SU ((uint32_t)0x0000000F)
+#define RTC_TSTR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TSTR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TSTR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TSTR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSDR register ****************/
+#define RTC_TSDR_WDU ((uint32_t)0x0000E000)
+#define RTC_TSDR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_TSDR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_TSDR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_TSDR_MT ((uint32_t)0x00001000)
+#define RTC_TSDR_MU ((uint32_t)0x00000F00)
+#define RTC_TSDR_MU_0 ((uint32_t)0x00000100)
+#define RTC_TSDR_MU_1 ((uint32_t)0x00000200)
+#define RTC_TSDR_MU_2 ((uint32_t)0x00000400)
+#define RTC_TSDR_MU_3 ((uint32_t)0x00000800)
+#define RTC_TSDR_DT ((uint32_t)0x00000030)
+#define RTC_TSDR_DT_0 ((uint32_t)0x00000010)
+#define RTC_TSDR_DT_1 ((uint32_t)0x00000020)
+#define RTC_TSDR_DU ((uint32_t)0x0000000F)
+#define RTC_TSDR_DU_0 ((uint32_t)0x00000001)
+#define RTC_TSDR_DU_1 ((uint32_t)0x00000002)
+#define RTC_TSDR_DU_2 ((uint32_t)0x00000004)
+#define RTC_TSDR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSSSR register ***************/
+#define RTC_TSSSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_CALR register ****************/
+#define RTC_CALR_CALP ((uint32_t)0x00008000)
+#define RTC_CALR_CALW8 ((uint32_t)0x00004000)
+#define RTC_CALR_CALW16 ((uint32_t)0x00002000)
+#define RTC_CALR_CALM ((uint32_t)0x000001FF)
+#define RTC_CALR_CALM_0 ((uint32_t)0x00000001)
+#define RTC_CALR_CALM_1 ((uint32_t)0x00000002)
+#define RTC_CALR_CALM_2 ((uint32_t)0x00000004)
+#define RTC_CALR_CALM_3 ((uint32_t)0x00000008)
+#define RTC_CALR_CALM_4 ((uint32_t)0x00000010)
+#define RTC_CALR_CALM_5 ((uint32_t)0x00000020)
+#define RTC_CALR_CALM_6 ((uint32_t)0x00000040)
+#define RTC_CALR_CALM_7 ((uint32_t)0x00000080)
+#define RTC_CALR_CALM_8 ((uint32_t)0x00000100)
+
+/******************** Bits definition for RTC_TAFCR register ***************/
+#define RTC_TAFCR_ALARMOUTTYPE ((uint32_t)0x00040000)
+#define RTC_TAFCR_TAMPPUDIS ((uint32_t)0x00008000)
+#define RTC_TAFCR_TAMPPRCH ((uint32_t)0x00006000)
+#define RTC_TAFCR_TAMPPRCH_0 ((uint32_t)0x00002000)
+#define RTC_TAFCR_TAMPPRCH_1 ((uint32_t)0x00004000)
+#define RTC_TAFCR_TAMPFLT ((uint32_t)0x00001800)
+#define RTC_TAFCR_TAMPFLT_0 ((uint32_t)0x00000800)
+#define RTC_TAFCR_TAMPFLT_1 ((uint32_t)0x00001000)
+#define RTC_TAFCR_TAMPFREQ ((uint32_t)0x00000700)
+#define RTC_TAFCR_TAMPFREQ_0 ((uint32_t)0x00000100)
+#define RTC_TAFCR_TAMPFREQ_1 ((uint32_t)0x00000200)
+#define RTC_TAFCR_TAMPFREQ_2 ((uint32_t)0x00000400)
+#define RTC_TAFCR_TAMPTS ((uint32_t)0x00000080)
+#define RTC_TAFCR_TAMP2TRG ((uint32_t)0x00000010)
+#define RTC_TAFCR_TAMP2E ((uint32_t)0x00000008)
+#define RTC_TAFCR_TAMPIE ((uint32_t)0x00000004)
+#define RTC_TAFCR_TAMP1TRG ((uint32_t)0x00000002)
+#define RTC_TAFCR_TAMP1E ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_ALRMASSR register ************/
+#define RTC_ALRMASSR_MASKSS ((uint32_t)0x0F000000)
+#define RTC_ALRMASSR_MASKSS_0 ((uint32_t)0x01000000)
+#define RTC_ALRMASSR_MASKSS_1 ((uint32_t)0x02000000)
+#define RTC_ALRMASSR_MASKSS_2 ((uint32_t)0x04000000)
+#define RTC_ALRMASSR_MASKSS_3 ((uint32_t)0x08000000)
+#define RTC_ALRMASSR_SS ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_BKP0R register ***************/
+#define RTC_BKP0R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP1R register ***************/
+#define RTC_BKP1R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP2R register ***************/
+#define RTC_BKP2R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP3R register ***************/
+#define RTC_BKP3R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP4R register ***************/
+#define RTC_BKP4R ((uint32_t)0xFFFFFFFF)
+
+/******************** Number of backup registers ******************************/
+#define RTC_BKP_NUMBER ((uint32_t)0x00000005)
+
+/*****************************************************************************/
+/* */
+/* Serial Peripheral Interface (SPI) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for SPI_CR1 register *******************/
+#define SPI_CR1_CPHA ((uint32_t)0x00000001) /*!< Clock Phase */
+#define SPI_CR1_CPOL ((uint32_t)0x00000002) /*!< Clock Polarity */
+#define SPI_CR1_MSTR ((uint32_t)0x00000004) /*!< Master Selection */
+#define SPI_CR1_BR ((uint32_t)0x00000038) /*!< BR[2:0] bits (Baud Rate Control) */
+#define SPI_CR1_BR_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define SPI_CR1_BR_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define SPI_CR1_BR_2 ((uint32_t)0x00000020) /*!< Bit 2 */
+#define SPI_CR1_SPE ((uint32_t)0x00000040) /*!< SPI Enable */
+#define SPI_CR1_LSBFIRST ((uint32_t)0x00000080) /*!< Frame Format */
+#define SPI_CR1_SSI ((uint32_t)0x00000100) /*!< Internal slave select */
+#define SPI_CR1_SSM ((uint32_t)0x00000200) /*!< Software slave management */
+#define SPI_CR1_RXONLY ((uint32_t)0x00000400) /*!< Receive only */
+#define SPI_CR1_CRCL ((uint32_t)0x00000800) /*!< CRC Length */
+#define SPI_CR1_CRCNEXT ((uint32_t)0x00001000) /*!< Transmit CRC next */
+#define SPI_CR1_CRCEN ((uint32_t)0x00002000) /*!< Hardware CRC calculation enable */
+#define SPI_CR1_BIDIOE ((uint32_t)0x00004000) /*!< Output enable in bidirectional mode */
+#define SPI_CR1_BIDIMODE ((uint32_t)0x00008000) /*!< Bidirectional data mode enable */
+
+/******************* Bit definition for SPI_CR2 register *******************/
+#define SPI_CR2_RXDMAEN ((uint32_t)0x00000001) /*!< Rx Buffer DMA Enable */
+#define SPI_CR2_TXDMAEN ((uint32_t)0x00000002) /*!< Tx Buffer DMA Enable */
+#define SPI_CR2_SSOE ((uint32_t)0x00000004) /*!< SS Output Enable */
+#define SPI_CR2_NSSP ((uint32_t)0x00000008) /*!< NSS pulse management Enable */
+#define SPI_CR2_FRF ((uint32_t)0x00000010) /*!< Frame Format Enable */
+#define SPI_CR2_ERRIE ((uint32_t)0x00000020) /*!< Error Interrupt Enable */
+#define SPI_CR2_RXNEIE ((uint32_t)0x00000040) /*!< RX buffer Not Empty Interrupt Enable */
+#define SPI_CR2_TXEIE ((uint32_t)0x00000080) /*!< Tx buffer Empty Interrupt Enable */
+#define SPI_CR2_DS ((uint32_t)0x00000F00) /*!< DS[3:0] Data Size */
+#define SPI_CR2_DS_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define SPI_CR2_DS_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define SPI_CR2_DS_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define SPI_CR2_DS_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+#define SPI_CR2_FRXTH ((uint32_t)0x00001000) /*!< FIFO reception Threshold */
+#define SPI_CR2_LDMARX ((uint32_t)0x00002000) /*!< Last DMA transfer for reception */
+#define SPI_CR2_LDMATX ((uint32_t)0x00004000) /*!< Last DMA transfer for transmission */
+
+/******************** Bit definition for SPI_SR register *******************/
+#define SPI_SR_RXNE ((uint32_t)0x00000001) /*!< Receive buffer Not Empty */
+#define SPI_SR_TXE ((uint32_t)0x00000002) /*!< Transmit buffer Empty */
+#define SPI_SR_CHSIDE ((uint32_t)0x00000004) /*!< Channel side */
+#define SPI_SR_UDR ((uint32_t)0x00000008) /*!< Underrun flag */
+#define SPI_SR_CRCERR ((uint32_t)0x00000010) /*!< CRC Error flag */
+#define SPI_SR_MODF ((uint32_t)0x00000020) /*!< Mode fault */
+#define SPI_SR_OVR ((uint32_t)0x00000040) /*!< Overrun flag */
+#define SPI_SR_BSY ((uint32_t)0x00000080) /*!< Busy flag */
+#define SPI_SR_FRE ((uint32_t)0x00000100) /*!< TI frame format error */
+#define SPI_SR_FRLVL ((uint32_t)0x00000600) /*!< FIFO Reception Level */
+#define SPI_SR_FRLVL_0 ((uint32_t)0x00000200) /*!< Bit 0 */
+#define SPI_SR_FRLVL_1 ((uint32_t)0x00000400) /*!< Bit 1 */
+#define SPI_SR_FTLVL ((uint32_t)0x00001800) /*!< FIFO Transmission Level */
+#define SPI_SR_FTLVL_0 ((uint32_t)0x00000800) /*!< Bit 0 */
+#define SPI_SR_FTLVL_1 ((uint32_t)0x00001000) /*!< Bit 1 */
+
+/******************** Bit definition for SPI_DR register *******************/
+#define SPI_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data Register */
+
+/******************* Bit definition for SPI_CRCPR register *****************/
+#define SPI_CRCPR_CRCPOLY ((uint32_t)0xFFFFFFFF) /*!< CRC polynomial register */
+
+/****************** Bit definition for SPI_RXCRCR register *****************/
+#define SPI_RXCRCR_RXCRC ((uint32_t)0xFFFFFFFF) /*!< Rx CRC Register */
+
+/****************** Bit definition for SPI_TXCRCR register *****************/
+#define SPI_TXCRCR_TXCRC ((uint32_t)0xFFFFFFFF) /*!< Tx CRC Register */
+
+/****************** Bit definition for SPI_I2SCFGR register ****************/
+#define SPI_I2SCFGR_CHLEN ((uint32_t)0x00000001) /*!<Channel length (number of bits per audio channel) */
+#define SPI_I2SCFGR_DATLEN ((uint32_t)0x00000006) /*!<DATLEN[1:0] bits (Data length to be transferred) */
+#define SPI_I2SCFGR_DATLEN_0 ((uint32_t)0x00000002) /*!<Bit 0 */
+#define SPI_I2SCFGR_DATLEN_1 ((uint32_t)0x00000004) /*!<Bit 1 */
+#define SPI_I2SCFGR_CKPOL ((uint32_t)0x00000008) /*!<steady state clock polarity */
+#define SPI_I2SCFGR_I2SSTD ((uint32_t)0x00000030) /*!<I2SSTD[1:0] bits (I2S standard selection) */
+#define SPI_I2SCFGR_I2SSTD_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SSTD_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define SPI_I2SCFGR_PCMSYNC ((uint32_t)0x00000080) /*!<PCM frame synchronization */
+#define SPI_I2SCFGR_I2SCFG ((uint32_t)0x00000300) /*!<I2SCFG[1:0] bits (I2S configuration mode) */
+#define SPI_I2SCFGR_I2SCFG_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SCFG_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define SPI_I2SCFGR_I2SE ((uint32_t)0x00000400) /*!<I2S Enable */
+#define SPI_I2SCFGR_I2SMOD ((uint32_t)0x00000800) /*!<I2S mode selection */
+
+/****************** Bit definition for SPI_I2SPR register ******************/
+#define SPI_I2SPR_I2SDIV ((uint32_t)0x000000FF) /*!<I2S Linear prescaler */
+#define SPI_I2SPR_ODD ((uint32_t)0x00000100) /*!<Odd factor for the prescaler */
+#define SPI_I2SPR_MCKOE ((uint32_t)0x00000200) /*!<Master Clock Output Enable */
+
+/*****************************************************************************/
+/* */
+/* System Configuration (SYSCFG) */
+/* */
+/*****************************************************************************/
+/***************** Bit definition for SYSCFG_CFGR1 register ****************/
+#define SYSCFG_CFGR1_MEM_MODE ((uint32_t)0x00000003) /*!< SYSCFG_Memory Remap Config */
+#define SYSCFG_CFGR1_MEM_MODE_0 ((uint32_t)0x00000001) /*!< SYSCFG_Memory Remap Config Bit 0 */
+#define SYSCFG_CFGR1_MEM_MODE_1 ((uint32_t)0x00000002) /*!< SYSCFG_Memory Remap Config Bit 1 */
+
+#define SYSCFG_CFGR1_DMA_RMP ((uint32_t)0x00001F00) /*!< DMA remap mask */
+#define SYSCFG_CFGR1_ADC_DMA_RMP ((uint32_t)0x00000100) /*!< ADC DMA remap */
+#define SYSCFG_CFGR1_USART1TX_DMA_RMP ((uint32_t)0x00000200) /*!< USART1 TX DMA remap */
+#define SYSCFG_CFGR1_USART1RX_DMA_RMP ((uint32_t)0x00000400) /*!< USART1 RX DMA remap */
+#define SYSCFG_CFGR1_TIM16_DMA_RMP ((uint32_t)0x00000800) /*!< Timer 16 DMA remap */
+#define SYSCFG_CFGR1_TIM17_DMA_RMP ((uint32_t)0x00001000) /*!< Timer 17 DMA remap */
+
+#define SYSCFG_CFGR1_I2C_FMP_PB6 ((uint32_t)0x00010000) /*!< I2C PB6 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB7 ((uint32_t)0x00020000) /*!< I2C PB7 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB8 ((uint32_t)0x00040000) /*!< I2C PB8 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB9 ((uint32_t)0x00080000) /*!< I2C PB9 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_I2C1 ((uint32_t)0x00100000) /*!< Enable Fast Mode Plus on PB10, PB11, PF6 and PF7 */
+#define SYSCFG_CFGR1_I2C_FMP_PA9 ((uint32_t)0x00400000) /*!< Enable Fast Mode Plus on PA9 */
+#define SYSCFG_CFGR1_I2C_FMP_PA10 ((uint32_t)0x00800000) /*!< Enable Fast Mode Plus on PA10 */
+
+/***************** Bit definition for SYSCFG_EXTICR1 register **************/
+#define SYSCFG_EXTICR1_EXTI0 ((uint16_t)0x000F) /*!< EXTI 0 configuration */
+#define SYSCFG_EXTICR1_EXTI1 ((uint16_t)0x00F0) /*!< EXTI 1 configuration */
+#define SYSCFG_EXTICR1_EXTI2 ((uint16_t)0x0F00) /*!< EXTI 2 configuration */
+#define SYSCFG_EXTICR1_EXTI3 ((uint16_t)0xF000) /*!< EXTI 3 configuration */
+
+/**
+ * @brief EXTI0 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI0_PA ((uint16_t)0x0000) /*!< PA[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PB ((uint16_t)0x0001) /*!< PB[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PC ((uint16_t)0x0002) /*!< PC[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PD ((uint16_t)0x0003) /*!< PD[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PF ((uint16_t)0x0005) /*!< PF[0] pin */
+
+/**
+ * @brief EXTI1 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI1_PA ((uint16_t)0x0000) /*!< PA[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PB ((uint16_t)0x0010) /*!< PB[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PC ((uint16_t)0x0020) /*!< PC[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PD ((uint16_t)0x0030) /*!< PD[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PF ((uint16_t)0x0050) /*!< PF[1] pin */
+
+/**
+ * @brief EXTI2 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI2_PA ((uint16_t)0x0000) /*!< PA[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PB ((uint16_t)0x0100) /*!< PB[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PC ((uint16_t)0x0200) /*!< PC[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PD ((uint16_t)0x0300) /*!< PD[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PF ((uint16_t)0x0500) /*!< PF[2] pin */
+
+/**
+ * @brief EXTI3 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI3_PA ((uint16_t)0x0000) /*!< PA[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PB ((uint16_t)0x1000) /*!< PB[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PC ((uint16_t)0x2000) /*!< PC[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PD ((uint16_t)0x3000) /*!< PD[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PF ((uint16_t)0x5000) /*!< PF[3] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR2 register **************/
+#define SYSCFG_EXTICR2_EXTI4 ((uint16_t)0x000F) /*!< EXTI 4 configuration */
+#define SYSCFG_EXTICR2_EXTI5 ((uint16_t)0x00F0) /*!< EXTI 5 configuration */
+#define SYSCFG_EXTICR2_EXTI6 ((uint16_t)0x0F00) /*!< EXTI 6 configuration */
+#define SYSCFG_EXTICR2_EXTI7 ((uint16_t)0xF000) /*!< EXTI 7 configuration */
+
+/**
+ * @brief EXTI4 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI4_PA ((uint16_t)0x0000) /*!< PA[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PB ((uint16_t)0x0001) /*!< PB[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PC ((uint16_t)0x0002) /*!< PC[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PD ((uint16_t)0x0003) /*!< PD[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PF ((uint16_t)0x0005) /*!< PF[4] pin */
+
+/**
+ * @brief EXTI5 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI5_PA ((uint16_t)0x0000) /*!< PA[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PB ((uint16_t)0x0010) /*!< PB[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PC ((uint16_t)0x0020) /*!< PC[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PD ((uint16_t)0x0030) /*!< PD[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PF ((uint16_t)0x0050) /*!< PF[5] pin */
+
+/**
+ * @brief EXTI6 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI6_PA ((uint16_t)0x0000) /*!< PA[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PB ((uint16_t)0x0100) /*!< PB[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PC ((uint16_t)0x0200) /*!< PC[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PD ((uint16_t)0x0300) /*!< PD[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PF ((uint16_t)0x0500) /*!< PF[6] pin */
+
+/**
+ * @brief EXTI7 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI7_PA ((uint16_t)0x0000) /*!< PA[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PB ((uint16_t)0x1000) /*!< PB[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PC ((uint16_t)0x2000) /*!< PC[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PD ((uint16_t)0x3000) /*!< PD[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PF ((uint16_t)0x5000) /*!< PF[7] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR3 register **************/
+#define SYSCFG_EXTICR3_EXTI8 ((uint16_t)0x000F) /*!< EXTI 8 configuration */
+#define SYSCFG_EXTICR3_EXTI9 ((uint16_t)0x00F0) /*!< EXTI 9 configuration */
+#define SYSCFG_EXTICR3_EXTI10 ((uint16_t)0x0F00) /*!< EXTI 10 configuration */
+#define SYSCFG_EXTICR3_EXTI11 ((uint16_t)0xF000) /*!< EXTI 11 configuration */
+
+/**
+ * @brief EXTI8 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI8_PA ((uint16_t)0x0000) /*!< PA[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PB ((uint16_t)0x0001) /*!< PB[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PC ((uint16_t)0x0002) /*!< PC[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PD ((uint16_t)0x0003) /*!< PD[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PF ((uint16_t)0x0005) /*!< PF[8] pin */
+
+/**
+ * @brief EXTI9 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI9_PA ((uint16_t)0x0000) /*!< PA[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PB ((uint16_t)0x0010) /*!< PB[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PC ((uint16_t)0x0020) /*!< PC[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PD ((uint16_t)0x0030) /*!< PD[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PF ((uint16_t)0x0050) /*!< PF[9] pin */
+
+/**
+ * @brief EXTI10 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI10_PA ((uint16_t)0x0000) /*!< PA[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PB ((uint16_t)0x0100) /*!< PB[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PC ((uint16_t)0x0200) /*!< PC[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PD ((uint16_t)0x0300) /*!< PD[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PF ((uint16_t)0x0500) /*!< PF[10] pin */
+
+/**
+ * @brief EXTI11 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI11_PA ((uint16_t)0x0000) /*!< PA[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PB ((uint16_t)0x1000) /*!< PB[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PC ((uint16_t)0x2000) /*!< PC[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PD ((uint16_t)0x3000) /*!< PD[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PF ((uint16_t)0x5000) /*!< PF[11] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR4 register **************/
+#define SYSCFG_EXTICR4_EXTI12 ((uint16_t)0x000F) /*!< EXTI 12 configuration */
+#define SYSCFG_EXTICR4_EXTI13 ((uint16_t)0x00F0) /*!< EXTI 13 configuration */
+#define SYSCFG_EXTICR4_EXTI14 ((uint16_t)0x0F00) /*!< EXTI 14 configuration */
+#define SYSCFG_EXTICR4_EXTI15 ((uint16_t)0xF000) /*!< EXTI 15 configuration */
+
+/**
+ * @brief EXTI12 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI12_PA ((uint16_t)0x0000) /*!< PA[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PB ((uint16_t)0x0001) /*!< PB[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PC ((uint16_t)0x0002) /*!< PC[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PD ((uint16_t)0x0003) /*!< PD[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PF ((uint16_t)0x0005) /*!< PF[12] pin */
+
+/**
+ * @brief EXTI13 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI13_PA ((uint16_t)0x0000) /*!< PA[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PB ((uint16_t)0x0010) /*!< PB[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PC ((uint16_t)0x0020) /*!< PC[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PD ((uint16_t)0x0030) /*!< PD[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PF ((uint16_t)0x0050) /*!< PF[13] pin */
+
+/**
+ * @brief EXTI14 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI14_PA ((uint16_t)0x0000) /*!< PA[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PB ((uint16_t)0x0100) /*!< PB[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PC ((uint16_t)0x0200) /*!< PC[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PD ((uint16_t)0x0300) /*!< PD[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PF ((uint16_t)0x0500) /*!< PF[14] pin */
+
+/**
+ * @brief EXTI15 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI15_PA ((uint16_t)0x0000) /*!< PA[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PB ((uint16_t)0x1000) /*!< PB[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PC ((uint16_t)0x2000) /*!< PC[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PD ((uint16_t)0x3000) /*!< PD[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PF ((uint16_t)0x5000) /*!< PF[15] pin */
+
+/***************** Bit definition for SYSCFG_CFGR2 register ****************/
+#define SYSCFG_CFGR2_LOCKUP_LOCK ((uint32_t)0x00000001) /*!< Enables and locks the LOCKUP (Hardfault) output of CortexM0 with Break Input of TIMER1 */
+#define SYSCFG_CFGR2_SRAM_PARITY_LOCK ((uint32_t)0x00000002) /*!< Enables and locks the SRAM_PARITY error signal with Break Input of TIMER1 */
+#define SYSCFG_CFGR2_PVD_LOCK ((uint32_t)0x00000004) /*!< Enables and locks the PVD connection with Timer1 Break Input and also the PVD_EN and PVDSEL[2:0] bits of the Power Control Interface */
+#define SYSCFG_CFGR2_SRAM_PEF ((uint32_t)0x00000100) /*!< SRAM Parity error flag */
+#define SYSCFG_CFGR2_SRAM_PE SYSCFG_CFGR2_SRAM_PEF /*!< SRAM Parity error flag (define maintained for legacy purpose) */
+
+/*****************************************************************************/
+/* */
+/* Timers (TIM) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for TIM_CR1 register *******************/
+#define TIM_CR1_CEN ((uint32_t)0x00000001) /*!<Counter enable */
+#define TIM_CR1_UDIS ((uint32_t)0x00000002) /*!<Update disable */
+#define TIM_CR1_URS ((uint32_t)0x00000004) /*!<Update request source */
+#define TIM_CR1_OPM ((uint32_t)0x00000008) /*!<One pulse mode */
+#define TIM_CR1_DIR ((uint32_t)0x00000010) /*!<Direction */
+
+#define TIM_CR1_CMS ((uint32_t)0x00000060) /*!<CMS[1:0] bits (Center-aligned mode selection) */
+#define TIM_CR1_CMS_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define TIM_CR1_CMS_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+
+#define TIM_CR1_ARPE ((uint32_t)0x00000080) /*!<Auto-reload preload enable */
+
+#define TIM_CR1_CKD ((uint32_t)0x00000300) /*!<CKD[1:0] bits (clock division) */
+#define TIM_CR1_CKD_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CR1_CKD_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+/******************* Bit definition for TIM_CR2 register *******************/
+#define TIM_CR2_CCPC ((uint32_t)0x00000001) /*!<Capture/Compare Preloaded Control */
+#define TIM_CR2_CCUS ((uint32_t)0x00000004) /*!<Capture/Compare Control Update Selection */
+#define TIM_CR2_CCDS ((uint32_t)0x00000008) /*!<Capture/Compare DMA Selection */
+
+#define TIM_CR2_MMS ((uint32_t)0x00000070) /*!<MMS[2:0] bits (Master Mode Selection) */
+#define TIM_CR2_MMS_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CR2_MMS_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CR2_MMS_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CR2_TI1S ((uint32_t)0x00000080) /*!<TI1 Selection */
+#define TIM_CR2_OIS1 ((uint32_t)0x00000100) /*!<Output Idle state 1 (OC1 output) */
+#define TIM_CR2_OIS1N ((uint32_t)0x00000200) /*!<Output Idle state 1 (OC1N output) */
+#define TIM_CR2_OIS2 ((uint32_t)0x00000400) /*!<Output Idle state 2 (OC2 output) */
+#define TIM_CR2_OIS2N ((uint32_t)0x00000800) /*!<Output Idle state 2 (OC2N output) */
+#define TIM_CR2_OIS3 ((uint32_t)0x00001000) /*!<Output Idle state 3 (OC3 output) */
+#define TIM_CR2_OIS3N ((uint32_t)0x00002000) /*!<Output Idle state 3 (OC3N output) */
+#define TIM_CR2_OIS4 ((uint32_t)0x00004000) /*!<Output Idle state 4 (OC4 output) */
+
+/******************* Bit definition for TIM_SMCR register ******************/
+#define TIM_SMCR_SMS ((uint32_t)0x00000007) /*!<SMS[2:0] bits (Slave mode selection) */
+#define TIM_SMCR_SMS_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_SMCR_SMS_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_SMCR_SMS_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+
+#define TIM_SMCR_OCCS ((uint32_t)0x00000008) /*!< OCREF clear selection */
+
+#define TIM_SMCR_TS ((uint32_t)0x00000070) /*!<TS[2:0] bits (Trigger selection) */
+#define TIM_SMCR_TS_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_SMCR_TS_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_SMCR_TS_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_SMCR_MSM ((uint32_t)0x00000080) /*!<Master/slave mode */
+
+#define TIM_SMCR_ETF ((uint32_t)0x00000F00) /*!<ETF[3:0] bits (External trigger filter) */
+#define TIM_SMCR_ETF_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_SMCR_ETF_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define TIM_SMCR_ETF_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define TIM_SMCR_ETF_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+
+#define TIM_SMCR_ETPS ((uint32_t)0x00003000) /*!<ETPS[1:0] bits (External trigger prescaler) */
+#define TIM_SMCR_ETPS_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_SMCR_ETPS_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+
+#define TIM_SMCR_ECE ((uint32_t)0x00004000) /*!<External clock enable */
+#define TIM_SMCR_ETP ((uint32_t)0x00008000) /*!<External trigger polarity */
+
+/******************* Bit definition for TIM_DIER register ******************/
+#define TIM_DIER_UIE ((uint32_t)0x00000001) /*!<Update interrupt enable */
+#define TIM_DIER_CC1IE ((uint32_t)0x00000002) /*!<Capture/Compare 1 interrupt enable */
+#define TIM_DIER_CC2IE ((uint32_t)0x00000004) /*!<Capture/Compare 2 interrupt enable */
+#define TIM_DIER_CC3IE ((uint32_t)0x00000008) /*!<Capture/Compare 3 interrupt enable */
+#define TIM_DIER_CC4IE ((uint32_t)0x00000010) /*!<Capture/Compare 4 interrupt enable */
+#define TIM_DIER_COMIE ((uint32_t)0x00000020) /*!<COM interrupt enable */
+#define TIM_DIER_TIE ((uint32_t)0x00000040) /*!<Trigger interrupt enable */
+#define TIM_DIER_BIE ((uint32_t)0x00000080) /*!<Break interrupt enable */
+#define TIM_DIER_UDE ((uint32_t)0x00000100) /*!<Update DMA request enable */
+#define TIM_DIER_CC1DE ((uint32_t)0x00000200) /*!<Capture/Compare 1 DMA request enable */
+#define TIM_DIER_CC2DE ((uint32_t)0x00000400) /*!<Capture/Compare 2 DMA request enable */
+#define TIM_DIER_CC3DE ((uint32_t)0x00000800) /*!<Capture/Compare 3 DMA request enable */
+#define TIM_DIER_CC4DE ((uint32_t)0x00001000) /*!<Capture/Compare 4 DMA request enable */
+#define TIM_DIER_COMDE ((uint32_t)0x00002000) /*!<COM DMA request enable */
+#define TIM_DIER_TDE ((uint32_t)0x00004000) /*!<Trigger DMA request enable */
+
+/******************** Bit definition for TIM_SR register *******************/
+#define TIM_SR_UIF ((uint32_t)0x00000001) /*!<Update interrupt Flag */
+#define TIM_SR_CC1IF ((uint32_t)0x00000002) /*!<Capture/Compare 1 interrupt Flag */
+#define TIM_SR_CC2IF ((uint32_t)0x00000004) /*!<Capture/Compare 2 interrupt Flag */
+#define TIM_SR_CC3IF ((uint32_t)0x00000008) /*!<Capture/Compare 3 interrupt Flag */
+#define TIM_SR_CC4IF ((uint32_t)0x00000010) /*!<Capture/Compare 4 interrupt Flag */
+#define TIM_SR_COMIF ((uint32_t)0x00000020) /*!<COM interrupt Flag */
+#define TIM_SR_TIF ((uint32_t)0x00000040) /*!<Trigger interrupt Flag */
+#define TIM_SR_BIF ((uint32_t)0x00000080) /*!<Break interrupt Flag */
+#define TIM_SR_CC1OF ((uint32_t)0x00000200) /*!<Capture/Compare 1 Overcapture Flag */
+#define TIM_SR_CC2OF ((uint32_t)0x00000400) /*!<Capture/Compare 2 Overcapture Flag */
+#define TIM_SR_CC3OF ((uint32_t)0x00000800) /*!<Capture/Compare 3 Overcapture Flag */
+#define TIM_SR_CC4OF ((uint32_t)0x00001000) /*!<Capture/Compare 4 Overcapture Flag */
+
+/******************* Bit definition for TIM_EGR register *******************/
+#define TIM_EGR_UG ((uint32_t)0x00000001) /*!<Update Generation */
+#define TIM_EGR_CC1G ((uint32_t)0x00000002) /*!<Capture/Compare 1 Generation */
+#define TIM_EGR_CC2G ((uint32_t)0x00000004) /*!<Capture/Compare 2 Generation */
+#define TIM_EGR_CC3G ((uint32_t)0x00000008) /*!<Capture/Compare 3 Generation */
+#define TIM_EGR_CC4G ((uint32_t)0x00000010) /*!<Capture/Compare 4 Generation */
+#define TIM_EGR_COMG ((uint32_t)0x00000020) /*!<Capture/Compare Control Update Generation */
+#define TIM_EGR_TG ((uint32_t)0x00000040) /*!<Trigger Generation */
+#define TIM_EGR_BG ((uint32_t)0x00000080) /*!<Break Generation */
+
+/****************** Bit definition for TIM_CCMR1 register ******************/
+#define TIM_CCMR1_CC1S ((uint32_t)0x00000003) /*!<CC1S[1:0] bits (Capture/Compare 1 Selection) */
+#define TIM_CCMR1_CC1S_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_CCMR1_CC1S_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC1FE ((uint32_t)0x00000004) /*!<Output Compare 1 Fast enable */
+#define TIM_CCMR1_OC1PE ((uint32_t)0x00000008) /*!<Output Compare 1 Preload enable */
+
+#define TIM_CCMR1_OC1M ((uint32_t)0x00000070) /*!<OC1M[2:0] bits (Output Compare 1 Mode) */
+#define TIM_CCMR1_OC1M_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR1_OC1M_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR1_OC1M_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CCMR1_OC1CE ((uint32_t)0x00000080) /*!<Output Compare 1Clear Enable */
+
+#define TIM_CCMR1_CC2S ((uint32_t)0x00000300) /*!<CC2S[1:0] bits (Capture/Compare 2 Selection) */
+#define TIM_CCMR1_CC2S_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CCMR1_CC2S_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC2FE ((uint32_t)0x00000400) /*!<Output Compare 2 Fast enable */
+#define TIM_CCMR1_OC2PE ((uint32_t)0x00000800) /*!<Output Compare 2 Preload enable */
+
+#define TIM_CCMR1_OC2M ((uint32_t)0x00007000) /*!<OC2M[2:0] bits (Output Compare 2 Mode) */
+#define TIM_CCMR1_OC2M_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR1_OC2M_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR1_OC2M_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+
+#define TIM_CCMR1_OC2CE ((uint32_t)0x00008000) /*!<Output Compare 2 Clear Enable */
+
+/*---------------------------------------------------------------------------*/
+
+#define TIM_CCMR1_IC1PSC ((uint32_t)0x0000000C) /*!<IC1PSC[1:0] bits (Input Capture 1 Prescaler) */
+#define TIM_CCMR1_IC1PSC_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define TIM_CCMR1_IC1PSC_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC1F ((uint32_t)0x000000F0) /*!<IC1F[3:0] bits (Input Capture 1 Filter) */
+#define TIM_CCMR1_IC1F_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR1_IC1F_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR1_IC1F_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define TIM_CCMR1_IC1F_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define TIM_CCMR1_IC2PSC ((uint32_t)0x00000C00) /*!<IC2PSC[1:0] bits (Input Capture 2 Prescaler) */
+#define TIM_CCMR1_IC2PSC_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define TIM_CCMR1_IC2PSC_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC2F ((uint32_t)0x0000F000) /*!<IC2F[3:0] bits (Input Capture 2 Filter) */
+#define TIM_CCMR1_IC2F_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR1_IC2F_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR1_IC2F_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define TIM_CCMR1_IC2F_3 ((uint32_t)0x00008000) /*!<Bit 3 */
+
+/****************** Bit definition for TIM_CCMR2 register ******************/
+#define TIM_CCMR2_CC3S ((uint32_t)0x00000003) /*!<CC3S[1:0] bits (Capture/Compare 3 Selection) */
+#define TIM_CCMR2_CC3S_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_CCMR2_CC3S_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC3FE ((uint32_t)0x00000004) /*!<Output Compare 3 Fast enable */
+#define TIM_CCMR2_OC3PE ((uint32_t)0x00000008) /*!<Output Compare 3 Preload enable */
+
+#define TIM_CCMR2_OC3M ((uint32_t)0x00000070) /*!<OC3M[2:0] bits (Output Compare 3 Mode) */
+#define TIM_CCMR2_OC3M_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR2_OC3M_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR2_OC3M_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CCMR2_OC3CE ((uint32_t)0x00000080) /*!<Output Compare 3 Clear Enable */
+
+#define TIM_CCMR2_CC4S ((uint32_t)0x00000300) /*!<CC4S[1:0] bits (Capture/Compare 4 Selection) */
+#define TIM_CCMR2_CC4S_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CCMR2_CC4S_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC4FE ((uint32_t)0x00000400) /*!<Output Compare 4 Fast enable */
+#define TIM_CCMR2_OC4PE ((uint32_t)0x00000800) /*!<Output Compare 4 Preload enable */
+
+#define TIM_CCMR2_OC4M ((uint32_t)0x00007000) /*!<OC4M[2:0] bits (Output Compare 4 Mode) */
+#define TIM_CCMR2_OC4M_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR2_OC4M_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR2_OC4M_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+
+#define TIM_CCMR2_OC4CE ((uint32_t)0x00008000) /*!<Output Compare 4 Clear Enable */
+
+/*---------------------------------------------------------------------------*/
+
+#define TIM_CCMR2_IC3PSC ((uint32_t)0x0000000C) /*!<IC3PSC[1:0] bits (Input Capture 3 Prescaler) */
+#define TIM_CCMR2_IC3PSC_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define TIM_CCMR2_IC3PSC_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC3F ((uint32_t)0x000000F0) /*!<IC3F[3:0] bits (Input Capture 3 Filter) */
+#define TIM_CCMR2_IC3F_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR2_IC3F_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR2_IC3F_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define TIM_CCMR2_IC3F_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define TIM_CCMR2_IC4PSC ((uint32_t)0x00000C00) /*!<IC4PSC[1:0] bits (Input Capture 4 Prescaler) */
+#define TIM_CCMR2_IC4PSC_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define TIM_CCMR2_IC4PSC_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC4F ((uint32_t)0x0000F000) /*!<IC4F[3:0] bits (Input Capture 4 Filter) */
+#define TIM_CCMR2_IC4F_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR2_IC4F_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR2_IC4F_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define TIM_CCMR2_IC4F_3 ((uint32_t)0x00008000) /*!<Bit 3 */
+
+/******************* Bit definition for TIM_CCER register ******************/
+#define TIM_CCER_CC1E ((uint32_t)0x00000001) /*!<Capture/Compare 1 output enable */
+#define TIM_CCER_CC1P ((uint32_t)0x00000002) /*!<Capture/Compare 1 output Polarity */
+#define TIM_CCER_CC1NE ((uint32_t)0x00000004) /*!<Capture/Compare 1 Complementary output enable */
+#define TIM_CCER_CC1NP ((uint32_t)0x00000008) /*!<Capture/Compare 1 Complementary output Polarity */
+#define TIM_CCER_CC2E ((uint32_t)0x00000010) /*!<Capture/Compare 2 output enable */
+#define TIM_CCER_CC2P ((uint32_t)0x00000020) /*!<Capture/Compare 2 output Polarity */
+#define TIM_CCER_CC2NE ((uint32_t)0x00000040) /*!<Capture/Compare 2 Complementary output enable */
+#define TIM_CCER_CC2NP ((uint32_t)0x00000080) /*!<Capture/Compare 2 Complementary output Polarity */
+#define TIM_CCER_CC3E ((uint32_t)0x00000100) /*!<Capture/Compare 3 output enable */
+#define TIM_CCER_CC3P ((uint32_t)0x00000200) /*!<Capture/Compare 3 output Polarity */
+#define TIM_CCER_CC3NE ((uint32_t)0x00000400) /*!<Capture/Compare 3 Complementary output enable */
+#define TIM_CCER_CC3NP ((uint32_t)0x00000800) /*!<Capture/Compare 3 Complementary output Polarity */
+#define TIM_CCER_CC4E ((uint32_t)0x00001000) /*!<Capture/Compare 4 output enable */
+#define TIM_CCER_CC4P ((uint32_t)0x00002000) /*!<Capture/Compare 4 output Polarity */
+#define TIM_CCER_CC4NP ((uint32_t)0x00008000) /*!<Capture/Compare 4 Complementary output Polarity */
+
+/******************* Bit definition for TIM_CNT register *******************/
+#define TIM_CNT_CNT ((uint32_t)0xFFFFFFFF) /*!<Counter Value */
+
+/******************* Bit definition for TIM_PSC register *******************/
+#define TIM_PSC_PSC ((uint32_t)0x0000FFFF) /*!<Prescaler Value */
+
+/******************* Bit definition for TIM_ARR register *******************/
+#define TIM_ARR_ARR ((uint32_t)0xFFFFFFFF) /*!<actual auto-reload Value */
+
+/******************* Bit definition for TIM_RCR register *******************/
+#define TIM_RCR_REP ((uint32_t)0x000000FF) /*!<Repetition Counter Value */
+
+/******************* Bit definition for TIM_CCR1 register ******************/
+#define TIM_CCR1_CCR1 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 1 Value */
+
+/******************* Bit definition for TIM_CCR2 register ******************/
+#define TIM_CCR2_CCR2 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 2 Value */
+
+/******************* Bit definition for TIM_CCR3 register ******************/
+#define TIM_CCR3_CCR3 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 3 Value */
+
+/******************* Bit definition for TIM_CCR4 register ******************/
+#define TIM_CCR4_CCR4 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 4 Value */
+
+/******************* Bit definition for TIM_BDTR register ******************/
+#define TIM_BDTR_DTG ((uint32_t)0x000000FF) /*!<DTG[0:7] bits (Dead-Time Generator set-up) */
+#define TIM_BDTR_DTG_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_BDTR_DTG_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_BDTR_DTG_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define TIM_BDTR_DTG_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define TIM_BDTR_DTG_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define TIM_BDTR_DTG_5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define TIM_BDTR_DTG_6 ((uint32_t)0x00000040) /*!<Bit 6 */
+#define TIM_BDTR_DTG_7 ((uint32_t)0x00000080) /*!<Bit 7 */
+
+#define TIM_BDTR_LOCK ((uint32_t)0x00000300) /*!<LOCK[1:0] bits (Lock Configuration) */
+#define TIM_BDTR_LOCK_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_BDTR_LOCK_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_BDTR_OSSI ((uint32_t)0x00000400) /*!<Off-State Selection for Idle mode */
+#define TIM_BDTR_OSSR ((uint32_t)0x00000800) /*!<Off-State Selection for Run mode */
+#define TIM_BDTR_BKE ((uint32_t)0x00001000) /*!<Break enable */
+#define TIM_BDTR_BKP ((uint32_t)0x00002000) /*!<Break Polarity */
+#define TIM_BDTR_AOE ((uint32_t)0x00004000) /*!<Automatic Output enable */
+#define TIM_BDTR_MOE ((uint32_t)0x00008000) /*!<Main Output enable */
+
+/******************* Bit definition for TIM_DCR register *******************/
+#define TIM_DCR_DBA ((uint32_t)0x0000001F) /*!<DBA[4:0] bits (DMA Base Address) */
+#define TIM_DCR_DBA_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_DCR_DBA_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_DCR_DBA_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define TIM_DCR_DBA_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define TIM_DCR_DBA_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+
+#define TIM_DCR_DBL ((uint32_t)0x00001F00) /*!<DBL[4:0] bits (DMA Burst Length) */
+#define TIM_DCR_DBL_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_DCR_DBL_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define TIM_DCR_DBL_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define TIM_DCR_DBL_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define TIM_DCR_DBL_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+
+/******************* Bit definition for TIM_DMAR register ******************/
+#define TIM_DMAR_DMAB ((uint32_t)0x0000FFFF) /*!<DMA register for burst accesses */
+
+/******************* Bit definition for TIM14_OR register ********************/
+#define TIM14_OR_TI1_RMP ((uint32_t)0x00000003) /*!<TI1_RMP[1:0] bits (TIM14 Input 4 remap) */
+#define TIM14_OR_TI1_RMP_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM14_OR_TI1_RMP_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+
+/******************************************************************************/
+/* */
+/* Universal Synchronous Asynchronous Receiver Transmitter (USART) */
+/* */
+/******************************************************************************/
+/****************** Bit definition for USART_CR1 register *******************/
+#define USART_CR1_UE ((uint32_t)0x00000001) /*!< USART Enable */
+#define USART_CR1_UESM ((uint32_t)0x00000002) /*!< USART Enable in STOP Mode */
+#define USART_CR1_RE ((uint32_t)0x00000004) /*!< Receiver Enable */
+#define USART_CR1_TE ((uint32_t)0x00000008) /*!< Transmitter Enable */
+#define USART_CR1_IDLEIE ((uint32_t)0x00000010) /*!< IDLE Interrupt Enable */
+#define USART_CR1_RXNEIE ((uint32_t)0x00000020) /*!< RXNE Interrupt Enable */
+#define USART_CR1_TCIE ((uint32_t)0x00000040) /*!< Transmission Complete Interrupt Enable */
+#define USART_CR1_TXEIE ((uint32_t)0x00000080) /*!< TXE Interrupt Enable */
+#define USART_CR1_PEIE ((uint32_t)0x00000100) /*!< PE Interrupt Enable */
+#define USART_CR1_PS ((uint32_t)0x00000200) /*!< Parity Selection */
+#define USART_CR1_PCE ((uint32_t)0x00000400) /*!< Parity Control Enable */
+#define USART_CR1_WAKE ((uint32_t)0x00000800) /*!< Receiver Wakeup method */
+#define USART_CR1_M0 ((uint32_t)0x00001000) /*!< Word length bit 0 */
+#define USART_CR1_M ((uint32_t)0x00001000) /*!< SmartCard Length */
+#define USART_CR1_MME ((uint32_t)0x00002000) /*!< Mute Mode Enable */
+#define USART_CR1_CMIE ((uint32_t)0x00004000) /*!< Character match interrupt enable */
+#define USART_CR1_OVER8 ((uint32_t)0x00008000) /*!< Oversampling by 8-bit or 16-bit mode */
+#define USART_CR1_DEDT ((uint32_t)0x001F0000) /*!< DEDT[4:0] bits (Driver Enable Deassertion Time) */
+#define USART_CR1_DEDT_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define USART_CR1_DEDT_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define USART_CR1_DEDT_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define USART_CR1_DEDT_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+#define USART_CR1_DEDT_4 ((uint32_t)0x00100000) /*!< Bit 4 */
+#define USART_CR1_DEAT ((uint32_t)0x03E00000) /*!< DEAT[4:0] bits (Driver Enable Assertion Time) */
+#define USART_CR1_DEAT_0 ((uint32_t)0x00200000) /*!< Bit 0 */
+#define USART_CR1_DEAT_1 ((uint32_t)0x00400000) /*!< Bit 1 */
+#define USART_CR1_DEAT_2 ((uint32_t)0x00800000) /*!< Bit 2 */
+#define USART_CR1_DEAT_3 ((uint32_t)0x01000000) /*!< Bit 3 */
+#define USART_CR1_DEAT_4 ((uint32_t)0x02000000) /*!< Bit 4 */
+#define USART_CR1_RTOIE ((uint32_t)0x04000000) /*!< Receive Time Out interrupt enable */
+#define USART_CR1_EOBIE ((uint32_t)0x08000000) /*!< End of Block interrupt enable */
+
+/****************** Bit definition for USART_CR2 register *******************/
+#define USART_CR2_ADDM7 ((uint32_t)0x00000010) /*!< 7-bit or 4-bit Address Detection */
+#define USART_CR2_LBDL ((uint32_t)0x00000020) /*!< LIN Break Detection Length */
+#define USART_CR2_LBDIE ((uint32_t)0x00000040) /*!< LIN Break Detection Interrupt Enable */
+#define USART_CR2_LBCL ((uint32_t)0x00000100) /*!< Last Bit Clock pulse */
+#define USART_CR2_CPHA ((uint32_t)0x00000200) /*!< Clock Phase */
+#define USART_CR2_CPOL ((uint32_t)0x00000400) /*!< Clock Polarity */
+#define USART_CR2_CLKEN ((uint32_t)0x00000800) /*!< Clock Enable */
+#define USART_CR2_STOP ((uint32_t)0x00003000) /*!< STOP[1:0] bits (STOP bits) */
+#define USART_CR2_STOP_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define USART_CR2_STOP_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+#define USART_CR2_LINEN ((uint32_t)0x00004000) /*!< LIN mode enable */
+#define USART_CR2_SWAP ((uint32_t)0x00008000) /*!< SWAP TX/RX pins */
+#define USART_CR2_RXINV ((uint32_t)0x00010000) /*!< RX pin active level inversion */
+#define USART_CR2_TXINV ((uint32_t)0x00020000) /*!< TX pin active level inversion */
+#define USART_CR2_DATAINV ((uint32_t)0x00040000) /*!< Binary data inversion */
+#define USART_CR2_MSBFIRST ((uint32_t)0x00080000) /*!< Most Significant Bit First */
+#define USART_CR2_ABREN ((uint32_t)0x00100000) /*!< Auto Baud-Rate Enable*/
+#define USART_CR2_ABRMODE ((uint32_t)0x00600000) /*!< ABRMOD[1:0] bits (Auto Baud-Rate Mode) */
+#define USART_CR2_ABRMODE_0 ((uint32_t)0x00200000) /*!< Bit 0 */
+#define USART_CR2_ABRMODE_1 ((uint32_t)0x00400000) /*!< Bit 1 */
+#define USART_CR2_RTOEN ((uint32_t)0x00800000) /*!< Receiver Time-Out enable */
+#define USART_CR2_ADD ((uint32_t)0xFF000000) /*!< Address of the USART node */
+
+/****************** Bit definition for USART_CR3 register *******************/
+#define USART_CR3_EIE ((uint32_t)0x00000001) /*!< Error Interrupt Enable */
+#define USART_CR3_IREN ((uint32_t)0x00000002) /*!< IrDA mode Enable */
+#define USART_CR3_IRLP ((uint32_t)0x00000004) /*!< IrDA Low-Power */
+#define USART_CR3_HDSEL ((uint32_t)0x00000008) /*!< Half-Duplex Selection */
+#define USART_CR3_NACK ((uint32_t)0x00000010) /*!< SmartCard NACK enable */
+#define USART_CR3_SCEN ((uint32_t)0x00000020) /*!< SmartCard mode enable */
+#define USART_CR3_DMAR ((uint32_t)0x00000040) /*!< DMA Enable Receiver */
+#define USART_CR3_DMAT ((uint32_t)0x00000080) /*!< DMA Enable Transmitter */
+#define USART_CR3_RTSE ((uint32_t)0x00000100) /*!< RTS Enable */
+#define USART_CR3_CTSE ((uint32_t)0x00000200) /*!< CTS Enable */
+#define USART_CR3_CTSIE ((uint32_t)0x00000400) /*!< CTS Interrupt Enable */
+#define USART_CR3_ONEBIT ((uint32_t)0x00000800) /*!< One sample bit method enable */
+#define USART_CR3_OVRDIS ((uint32_t)0x00001000) /*!< Overrun Disable */
+#define USART_CR3_DDRE ((uint32_t)0x00002000) /*!< DMA Disable on Reception Error */
+#define USART_CR3_DEM ((uint32_t)0x00004000) /*!< Driver Enable Mode */
+#define USART_CR3_DEP ((uint32_t)0x00008000) /*!< Driver Enable Polarity Selection */
+#define USART_CR3_SCARCNT ((uint32_t)0x000E0000) /*!< SCARCNT[2:0] bits (SmartCard Auto-Retry Count) */
+#define USART_CR3_SCARCNT_0 ((uint32_t)0x00020000) /*!< Bit 0 */
+#define USART_CR3_SCARCNT_1 ((uint32_t)0x00040000) /*!< Bit 1 */
+#define USART_CR3_SCARCNT_2 ((uint32_t)0x00080000) /*!< Bit 2 */
+#define USART_CR3_WUS ((uint32_t)0x00300000) /*!< WUS[1:0] bits (Wake UP Interrupt Flag Selection) */
+#define USART_CR3_WUS_0 ((uint32_t)0x00100000) /*!< Bit 0 */
+#define USART_CR3_WUS_1 ((uint32_t)0x00200000) /*!< Bit 1 */
+#define USART_CR3_WUFIE ((uint32_t)0x00400000) /*!< Wake Up Interrupt Enable */
+
+/****************** Bit definition for USART_BRR register *******************/
+#define USART_BRR_DIV_FRACTION ((uint32_t)0x0000000F) /*!< Fraction of USARTDIV */
+#define USART_BRR_DIV_MANTISSA ((uint32_t)0x0000FFF0) /*!< Mantissa of USARTDIV */
+
+/****************** Bit definition for USART_GTPR register ******************/
+#define USART_GTPR_PSC ((uint32_t)0x000000FF) /*!< PSC[7:0] bits (Prescaler value) */
+#define USART_GTPR_GT ((uint32_t)0x0000FF00) /*!< GT[7:0] bits (Guard time value) */
+
+
+/******************* Bit definition for USART_RTOR register *****************/
+#define USART_RTOR_RTO ((uint32_t)0x00FFFFFF) /*!< Receiver Time Out Value */
+#define USART_RTOR_BLEN ((uint32_t)0xFF000000) /*!< Block Length */
+
+/******************* Bit definition for USART_RQR register ******************/
+#define USART_RQR_ABRRQ ((uint32_t)0x00000001) /*!< Auto-Baud Rate Request */
+#define USART_RQR_SBKRQ ((uint32_t)0x00000002) /*!< Send Break Request */
+#define USART_RQR_MMRQ ((uint32_t)0x00000004) /*!< Mute Mode Request */
+#define USART_RQR_RXFRQ ((uint32_t)0x00000008) /*!< Receive Data flush Request */
+#define USART_RQR_TXFRQ ((uint32_t)0x00000010) /*!< Transmit data flush Request */
+
+/******************* Bit definition for USART_ISR register ******************/
+#define USART_ISR_PE ((uint32_t)0x00000001) /*!< Parity Error */
+#define USART_ISR_FE ((uint32_t)0x00000002) /*!< Framing Error */
+#define USART_ISR_NE ((uint32_t)0x00000004) /*!< Noise detected Flag */
+#define USART_ISR_ORE ((uint32_t)0x00000008) /*!< OverRun Error */
+#define USART_ISR_IDLE ((uint32_t)0x00000010) /*!< IDLE line detected */
+#define USART_ISR_RXNE ((uint32_t)0x00000020) /*!< Read Data Register Not Empty */
+#define USART_ISR_TC ((uint32_t)0x00000040) /*!< Transmission Complete */
+#define USART_ISR_TXE ((uint32_t)0x00000080) /*!< Transmit Data Register Empty */
+#define USART_ISR_LBDF ((uint32_t)0x00000100) /*!< LIN Break Detection Flag */
+#define USART_ISR_CTSIF ((uint32_t)0x00000200) /*!< CTS interrupt flag */
+#define USART_ISR_CTS ((uint32_t)0x00000400) /*!< CTS flag */
+#define USART_ISR_RTOF ((uint32_t)0x00000800) /*!< Receiver Time Out */
+#define USART_ISR_EOBF ((uint32_t)0x00001000) /*!< End Of Block Flag */
+#define USART_ISR_ABRE ((uint32_t)0x00004000) /*!< Auto-Baud Rate Error */
+#define USART_ISR_ABRF ((uint32_t)0x00008000) /*!< Auto-Baud Rate Flag */
+#define USART_ISR_BUSY ((uint32_t)0x00010000) /*!< Busy Flag */
+#define USART_ISR_CMF ((uint32_t)0x00020000) /*!< Character Match Flag */
+#define USART_ISR_SBKF ((uint32_t)0x00040000) /*!< Send Break Flag */
+#define USART_ISR_RWU ((uint32_t)0x00080000) /*!< Receive Wake Up from mute mode Flag */
+#define USART_ISR_WUF ((uint32_t)0x00100000) /*!< Wake Up from stop mode Flag */
+#define USART_ISR_TEACK ((uint32_t)0x00200000) /*!< Transmit Enable Acknowledge Flag */
+#define USART_ISR_REACK ((uint32_t)0x00400000) /*!< Receive Enable Acknowledge Flag */
+
+/******************* Bit definition for USART_ICR register ******************/
+#define USART_ICR_PECF ((uint32_t)0x00000001) /*!< Parity Error Clear Flag */
+#define USART_ICR_FECF ((uint32_t)0x00000002) /*!< Framing Error Clear Flag */
+#define USART_ICR_NCF ((uint32_t)0x00000004) /*!< Noise detected Clear Flag */
+#define USART_ICR_ORECF ((uint32_t)0x00000008) /*!< OverRun Error Clear Flag */
+#define USART_ICR_IDLECF ((uint32_t)0x00000010) /*!< IDLE line detected Clear Flag */
+#define USART_ICR_TCCF ((uint32_t)0x00000040) /*!< Transmission Complete Clear Flag */
+#define USART_ICR_LBDCF ((uint32_t)0x00000100) /*!< LIN Break Detection Clear Flag */
+#define USART_ICR_CTSCF ((uint32_t)0x00000200) /*!< CTS Interrupt Clear Flag */
+#define USART_ICR_RTOCF ((uint32_t)0x00000800) /*!< Receiver Time Out Clear Flag */
+#define USART_ICR_EOBCF ((uint32_t)0x00001000) /*!< End Of Block Clear Flag */
+#define USART_ICR_CMCF ((uint32_t)0x00020000) /*!< Character Match Clear Flag */
+#define USART_ICR_WUCF ((uint32_t)0x00100000) /*!< Wake Up from stop mode Clear Flag */
+
+/******************* Bit definition for USART_RDR register ******************/
+#define USART_RDR_RDR ((uint16_t)0x01FF) /*!< RDR[8:0] bits (Receive Data value) */
+
+/******************* Bit definition for USART_TDR register ******************/
+#define USART_TDR_TDR ((uint16_t)0x01FF) /*!< TDR[8:0] bits (Transmit Data value) */
+
+/******************************************************************************/
+/* */
+/* Window WATCHDOG (WWDG) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for WWDG_CR register ********************/
+#define WWDG_CR_T ((uint32_t)0x7F) /*!<T[6:0] bits (7-Bit counter (MSB to LSB)) */
+#define WWDG_CR_T0 ((uint32_t)0x01) /*!<Bit 0 */
+#define WWDG_CR_T1 ((uint32_t)0x02) /*!<Bit 1 */
+#define WWDG_CR_T2 ((uint32_t)0x04) /*!<Bit 2 */
+#define WWDG_CR_T3 ((uint32_t)0x08) /*!<Bit 3 */
+#define WWDG_CR_T4 ((uint32_t)0x10) /*!<Bit 4 */
+#define WWDG_CR_T5 ((uint32_t)0x20) /*!<Bit 5 */
+#define WWDG_CR_T6 ((uint32_t)0x40) /*!<Bit 6 */
+
+#define WWDG_CR_WDGA ((uint32_t)0x80) /*!<Activation bit */
+
+/******************* Bit definition for WWDG_CFR register *******************/
+#define WWDG_CFR_W ((uint32_t)0x007F) /*!<W[6:0] bits (7-bit window value) */
+#define WWDG_CFR_W0 ((uint32_t)0x0001) /*!<Bit 0 */
+#define WWDG_CFR_W1 ((uint32_t)0x0002) /*!<Bit 1 */
+#define WWDG_CFR_W2 ((uint32_t)0x0004) /*!<Bit 2 */
+#define WWDG_CFR_W3 ((uint32_t)0x0008) /*!<Bit 3 */
+#define WWDG_CFR_W4 ((uint32_t)0x0010) /*!<Bit 4 */
+#define WWDG_CFR_W5 ((uint32_t)0x0020) /*!<Bit 5 */
+#define WWDG_CFR_W6 ((uint32_t)0x0040) /*!<Bit 6 */
+
+#define WWDG_CFR_WDGTB ((uint32_t)0x0180) /*!<WDGTB[1:0] bits (Timer Base) */
+#define WWDG_CFR_WDGTB0 ((uint32_t)0x0080) /*!<Bit 0 */
+#define WWDG_CFR_WDGTB1 ((uint32_t)0x0100) /*!<Bit 1 */
+
+#define WWDG_CFR_EWI ((uint32_t)0x0200) /*!<Early Wakeup Interrupt */
+
+/******************* Bit definition for WWDG_SR register ********************/
+#define WWDG_SR_EWIF ((uint32_t)0x01) /*!<Early Wakeup Interrupt Flag */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+
+/** @addtogroup Exported_macro
+ * @{
+ */
+
+/****************************** ADC Instances *********************************/
+#define IS_ADC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == ADC1)
+
+#define IS_ADC_COMMON_INSTANCE(INSTANCE) ((INSTANCE) == ADC)
+
+/****************************** CRC Instances *********************************/
+#define IS_CRC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CRC)
+
+/******************************* DMA Instances ******************************/
+#define IS_DMA_ALL_INSTANCE(INSTANCE) (((INSTANCE) == DMA1_Channel1) || \
+ ((INSTANCE) == DMA1_Channel2) || \
+ ((INSTANCE) == DMA1_Channel3) || \
+ ((INSTANCE) == DMA1_Channel4) || \
+ ((INSTANCE) == DMA1_Channel5))
+
+/****************************** GPIO Instances ********************************/
+#define IS_GPIO_ALL_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB) || \
+ ((INSTANCE) == GPIOC) || \
+ ((INSTANCE) == GPIOF))
+
+#define IS_GPIO_AF_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB))
+
+#define IS_GPIO_LOCK_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB))
+
+/****************************** I2C Instances *********************************/
+#define IS_I2C_ALL_INSTANCE(INSTANCE) ((INSTANCE) == I2C1)
+
+/****************************** I2S Instances *********************************/
+#define IS_I2S_ALL_INSTANCE(INSTANCE) ((INSTANCE) == SPI1)
+
+/****************************** IWDG Instances ********************************/
+#define IS_IWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == IWDG)
+
+/****************************** RTC Instances *********************************/
+#define IS_RTC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == RTC)
+
+/****************************** SMBUS Instances *********************************/
+#define IS_SMBUS_ALL_INSTANCE(INSTANCE) ((INSTANCE) == I2C1)
+
+/****************************** SPI Instances *********************************/
+#define IS_SPI_ALL_INSTANCE(INSTANCE) ((INSTANCE) == SPI1)
+
+/****************************** TIM Instances *********************************/
+#define IS_TIM_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CC1_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CC2_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CC3_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CC4_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_TIX_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_ENCODER_INTERFACE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_HALL_INTERFACE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1))
+
+#define IS_TIM_XOR_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_MASTER_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_SLAVE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_32B_COUNTER_INSTANCE(INSTANCE)\
+ ((INSTANCE) == TIM2)
+
+#define IS_TIM_DMABURST_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_BREAK_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CCX_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM2) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM3) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM14) && \
+ (((CHANNEL) == TIM_CHANNEL_1))) \
+ || \
+ (((INSTANCE) == TIM16) && \
+ (((CHANNEL) == TIM_CHANNEL_1))) \
+ || \
+ (((INSTANCE) == TIM17) && \
+ (((CHANNEL) == TIM_CHANNEL_1))))
+
+#define IS_TIM_CCXN_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3))) \
+ || \
+ (((INSTANCE) == TIM16) && \
+ ((CHANNEL) == TIM_CHANNEL_1)) \
+ || \
+ (((INSTANCE) == TIM17) && \
+ ((CHANNEL) == TIM_CHANNEL_1)))
+
+#define IS_TIM_COUNTER_MODE_SELECT_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_REPETITION_COUNTER_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CLOCK_DIVISION_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_DMA_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_DMA_CC_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_COMMUTATION_EVENT_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_REMAP_INSTANCE(INSTANCE)\
+ ((INSTANCE) == TIM14)
+
+/*********************** UART Instances : IRDA mode ***************************/
+#define IS_IRDA_INSTANCE(INSTANCE) (((INSTANCE) == USART1))
+
+/********************* UART Instances : Smard card mode ***********************/
+#define IS_SMARTCARD_INSTANCE(INSTANCE) (((INSTANCE) == USART1))
+
+/******************** USART Instances : Synchronous mode **********************/
+#define IS_USART_INSTANCE(INSTANCE) (((INSTANCE) == USART1))
+
+/******************** USART Instances : auto Baud rate detection **************/
+#define IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(INSTANCE) (((INSTANCE) == USART1))
+
+/******************** UART Instances : Asynchronous mode **********************/
+#define IS_UART_INSTANCE(INSTANCE) (((INSTANCE) == USART1))
+
+/******************** UART Instances : Half-Duplex mode **********************/
+#define IS_UART_HALFDUPLEX_INSTANCE(INSTANCE) ((INSTANCE) == USART1)
+
+/****************** UART Instances : Hardware Flow control ********************/
+#define IS_UART_HWFLOW_INSTANCE(INSTANCE) (((INSTANCE) == USART1))
+
+/****************** UART Instances : LIN mode ********************/
+#define IS_UART_LIN_INSTANCE(INSTANCE) ((INSTANCE) == USART1)
+
+/****************** UART Instances : wakeup from stop mode ********************/
+#define IS_UART_WAKEUP_INSTANCE(INSTANCE) ((INSTANCE) == USART1)
+
+/****************** UART Instances : Auto Baud Rate detection ********************/
+#define IS_UART_AUTOBAUDRATE_DETECTION_INSTANCE(INSTANCE) (((INSTANCE) == USART1))
+
+/****************** UART Instances : Driver enable detection ********************/
+#define IS_UART_DRIVER_ENABLE_INSTANCE(INSTANCE) (((INSTANCE) == USART1))
+
+/****************************** WWDG Instances ********************************/
+#define IS_WWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == WWDG)
+
+/**
+ * @}
+ */
+
+
+/******************************************************************************/
+/* For a painless codes migration between the STM32F0xx device product */
+/* lines, the aliases defined below are put in place to overcome the */
+/* differences in the interrupt handlers and IRQn definitions. */
+/* No need to update developed interrupt code when moving across */
+/* product lines within the same STM32F0 Family */
+/******************************************************************************/
+
+/* Aliases for __IRQn */
+#define PVD_VDDIO2_IRQn PVD_IRQn
+#define RCC_CRS_IRQn RCC_IRQn
+#define DMA1_Channel4_5_6_7_IRQn DMA1_Channel4_5_IRQn
+#define ADC1_COMP_IRQn ADC1_IRQn
+
+/* Aliases for __IRQHandler */
+#define PVD_VDDIO2_IRQHandler PVD_IRQHandler
+#define RCC_CRS_IRQHandler RCC_IRQHandler
+#define DMA1_Channel4_5_6_7_IRQHandler DMA1_Channel4_5_IRQHandler
+#define ADC1_COMP_IRQHandler ADC1_IRQHandler
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F031x6_H */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/include/devices/stm32f038xx.h b/f0/include/devices/stm32f038xx.h
new file mode 100755
index 0000000000000000000000000000000000000000..8feb874da67566319a239c05846f8cdc02eebf1b
--- /dev/null
+++ b/f0/include/devices/stm32f038xx.h
@@ -0,0 +1,3231 @@
+/**
+ ******************************************************************************
+ * @file stm32f038xx.h
+ * @author MCD Application Team
+ * @version V2.2.1
+ * @date 09-January-2015
+ * @brief CMSIS STM32F038xx devices Peripheral Access Layer Header File.
+ *
+ * This file contains:
+ * - Data structures and the address mapping for all peripherals
+ * - Peripheral's registers declarations and bits definition
+ * - Macros to access peripheral’s registers hardware
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS_Device
+ * @{
+ */
+
+/** @addtogroup stm32f038xx
+ * @{
+ */
+
+#ifndef __STM32F038xx_H
+#define __STM32F038xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+
+/**
+ * @brief Configuration of the Cortex-M0 Processor and Core Peripherals
+ */
+#define __CM0_REV 0 /*!< Core Revision r0p0 */
+#define __MPU_PRESENT 0 /*!< STM32F0xx do not provide MPU */
+#define __NVIC_PRIO_BITS 2 /*!< STM32F0xx uses 2 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F038xx device Interrupt Number Definition
+ */
+typedef enum
+{
+/****** Cortex-M0 Processor Exceptions Numbers **************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */
+ SVC_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */
+
+/****** STM32F038xx specific Interrupt Numbers **************************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ RTC_IRQn = 2, /*!< RTC Interrupt through EXTI Lines 17, 19 and 20 */
+ FLASH_IRQn = 3, /*!< FLASH global Interrupt */
+ RCC_IRQn = 4, /*!< RCC global Interrupt */
+ EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupts */
+ EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupts */
+ EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupts */
+ DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */
+ DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupts */
+ DMA1_Channel4_5_IRQn = 11, /*!< DMA1 Channel 4 and Channel 5 Interrupts */
+ ADC1_IRQn = 12, /*!< ADC1 global Interrupt */
+ TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupts */
+ TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 15, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 16, /*!< TIM3 global Interrupt */
+ TIM14_IRQn = 19, /*!< TIM14 global Interrupt */
+ TIM16_IRQn = 21, /*!< TIM16 global Interrupt */
+ TIM17_IRQn = 22, /*!< TIM17 global Interrupt */
+ I2C1_IRQn = 23, /*!< I2C1 Event Interrupt & EXTI Line23 Interrupt (I2C1 wakeup) */
+ SPI1_IRQn = 25, /*!< SPI1 global Interrupt */
+ USART1_IRQn = 27 /*!< USART1 global Interrupt & EXTI Line25 Interrupt (USART1 wakeup) */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm0.h" /* Cortex-M0 processor and core peripherals */
+#include "system_stm32f0xx.h" /* STM32F0xx System Header */
+#include <stdint.h>
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< ADC Interrupt and Status register, Address offset:0x00 */
+ __IO uint32_t IER; /*!< ADC Interrupt Enable register, Address offset:0x04 */
+ __IO uint32_t CR; /*!< ADC Control register, Address offset:0x08 */
+ __IO uint32_t CFGR1; /*!< ADC Configuration register 1, Address offset:0x0C */
+ __IO uint32_t CFGR2; /*!< ADC Configuration register 2, Address offset:0x10 */
+ __IO uint32_t SMPR; /*!< ADC Sampling time register, Address offset:0x14 */
+ uint32_t RESERVED1; /*!< Reserved, 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, 0x1C */
+ __IO uint32_t TR; /*!< ADC watchdog threshold register, Address offset:0x20 */
+ uint32_t RESERVED3; /*!< Reserved, 0x24 */
+ __IO uint32_t CHSELR; /*!< ADC channel selection register, Address offset:0x28 */
+ uint32_t RESERVED4[5]; /*!< Reserved, 0x2C */
+ __IO uint32_t DR; /*!< ADC data register, Address offset:0x40 */
+}ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CCR;
+}ADC_Common_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+ uint32_t RESERVED2; /*!< Reserved, 0x0C */
+ __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */
+ __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */
+}CRC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< DMA channel x configuration register */
+ __IO uint32_t CNDTR; /*!< DMA channel x number of data register */
+ __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */
+ __IO uint32_t CMAR; /*!< DMA channel x memory address register */
+}DMA_Channel_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */
+ __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */
+}DMA_TypeDef;
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!<EXTI Interrupt mask register, Address offset: 0x00 */
+ __IO uint32_t EMR; /*!<EXTI Event mask register, Address offset: 0x04 */
+ __IO uint32_t RTSR; /*!<EXTI Rising trigger selection register , Address offset: 0x08 */
+ __IO uint32_t FTSR; /*!<EXTI Falling trigger selection register, Address offset: 0x0C */
+ __IO uint32_t SWIER; /*!<EXTI Software interrupt event register, Address offset: 0x10 */
+ __IO uint32_t PR; /*!<EXTI Pending register, Address offset: 0x14 */
+}EXTI_TypeDef;
+
+/**
+ * @brief FLASH Registers
+ */
+typedef struct
+{
+ __IO uint32_t ACR; /*!<FLASH access control register, Address offset: 0x00 */
+ __IO uint32_t KEYR; /*!<FLASH key register, Address offset: 0x04 */
+ __IO uint32_t OPTKEYR; /*!<FLASH OPT key register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!<FLASH status register, Address offset: 0x0C */
+ __IO uint32_t CR; /*!<FLASH control register, Address offset: 0x10 */
+ __IO uint32_t AR; /*!<FLASH address register, Address offset: 0x14 */
+ __IO uint32_t RESERVED; /*!< Reserved, 0x18 */
+ __IO uint32_t OBR; /*!<FLASH option bytes register, Address offset: 0x1C */
+ __IO uint32_t WRPR; /*!<FLASH option bytes register, Address offset: 0x20 */
+}FLASH_TypeDef;
+
+
+/**
+ * @brief Option Bytes Registers
+ */
+typedef struct
+{
+ __IO uint16_t RDP; /*!< FLASH option byte Read protection, Address offset: 0x00 */
+ __IO uint16_t USER; /*!< FLASH option byte user options, Address offset: 0x02 */
+ __IO uint16_t DATA0; /*!< User data byte 0 (stored in FLASH_OBR[23:16]), Address offset: 0x04 */
+ __IO uint16_t DATA1; /*!< User data byte 1 (stored in FLASH_OBR[31:24]), Address offset: 0x06 */
+ __IO uint16_t WRP0; /*!< FLASH option byte write protection 0, Address offset: 0x08 */
+ __IO uint16_t WRP1; /*!< FLASH option byte write protection 1, Address offset: 0x0A */
+ __IO uint16_t WRP2; /*!< FLASH option byte write protection 2, Address offset: 0x0C */
+ __IO uint16_t WRP3; /*!< FLASH option byte write protection 3, Address offset: 0x0E */
+}OB_TypeDef;
+
+/**
+ * @brief General Purpose I/O
+ */
+
+typedef struct
+{
+ __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */
+ __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */
+ __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */
+ __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */
+ __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */
+ __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */
+ __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x1A */
+ __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */
+ __IO uint32_t AFR[2]; /*!< GPIO alternate function low register, Address offset: 0x20-0x24 */
+ __IO uint32_t BRR; /*!< GPIO bit reset register, Address offset: 0x28 */
+}GPIO_TypeDef;
+
+/**
+ * @brief SysTem Configuration
+ */
+
+typedef struct
+{
+ __IO uint32_t CFGR1; /*!< SYSCFG configuration register 1, Address offset: 0x00 */
+ uint32_t RESERVED; /*!< Reserved, 0x04 */
+ __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration register, Address offset: 0x14-0x08 */
+ __IO uint32_t CFGR2; /*!< SYSCFG configuration register 2, Address offset: 0x18 */
+}SYSCFG_TypeDef;
+
+/**
+ * @brief Inter-integrated Circuit Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */
+ __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */
+ __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */
+ __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */
+ __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */
+ __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */
+ __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */
+ __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */
+ __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */
+ __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */
+}I2C_TypeDef;
+
+/**
+ * @brief Independent WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */
+ __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */
+ __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */
+ __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */
+}IWDG_TypeDef;
+
+/**
+ * @brief Power Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< PWR power control register, Address offset: 0x00 */
+ __IO uint32_t CSR; /*!< PWR power control/status register, Address offset: 0x04 */
+}PWR_TypeDef;
+
+/**
+ * @brief Reset and Clock Control
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */
+ __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x04 */
+ __IO uint32_t CIR; /*!< RCC clock interrupt register, Address offset: 0x08 */
+ __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x0C */
+ __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x10 */
+ __IO uint32_t AHBENR; /*!< RCC AHB peripheral clock register, Address offset: 0x14 */
+ __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x18 */
+ __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x1C */
+ __IO uint32_t BDCR; /*!< RCC Backup domain control register, Address offset: 0x20 */
+ __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x24 */
+ __IO uint32_t AHBRSTR; /*!< RCC AHB peripheral reset register, Address offset: 0x28 */
+ __IO uint32_t CFGR2; /*!< RCC clock configuration register 2, Address offset: 0x2C */
+ __IO uint32_t CFGR3; /*!< RCC clock configuration register 3, Address offset: 0x30 */
+ __IO uint32_t CR2; /*!< RCC clock control register 2, Address offset: 0x34 */
+}RCC_TypeDef;
+
+/**
+ * @brief Real-Time Clock
+ */
+
+typedef struct
+{
+ __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */
+ __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */
+ uint32_t RESERVED1; /*!< Reserved, Address offset: 0x14 */
+ uint32_t RESERVED2; /*!< Reserved, Address offset: 0x18 */
+ __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */
+ uint32_t RESERVED3; /*!< Reserved, Address offset: 0x20 */
+ __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */
+ __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */
+ __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */
+ __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */
+ __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */
+ __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */
+ __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */
+ __IO uint32_t TAFCR; /*!< RTC tamper and alternate function configuration register, Address offset: 0x40 */
+ __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */
+ uint32_t RESERVED4; /*!< Reserved, Address offset: 0x48 */
+ uint32_t RESERVED5; /*!< Reserved, Address offset: 0x4C */
+ __IO uint32_t BKP0R; /*!< RTC backup register 0, Address offset: 0x50 */
+ __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */
+ __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */
+ __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */
+ __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */
+}RTC_TypeDef;
+
+/**
+ * @brief Serial Peripheral Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< SPI Control register 1 (not used in I2S mode), Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */
+ __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */
+ __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */
+ __IO uint32_t RXCRCR; /*!< SPI Rx CRC register (not used in I2S mode), Address offset: 0x14 */
+ __IO uint32_t TXCRCR; /*!< SPI Tx CRC register (not used in I2S mode), Address offset: 0x18 */
+ __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */
+ __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */
+}SPI_TypeDef;
+
+/**
+ * @brief TIM
+ */
+typedef struct
+{
+ __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */
+ __IO uint32_t SMCR; /*!< TIM slave Mode Control register, Address offset: 0x08 */
+ __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */
+ __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */
+ __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */
+ __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */
+ __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */
+ __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */
+ __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */
+ __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */
+ __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */
+ __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */
+ __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */
+ __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */
+ __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */
+ __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */
+ __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */
+ __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */
+ __IO uint32_t DMAR; /*!< TIM DMA address for full transfer register, Address offset: 0x4C */
+ __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */
+}TIM_TypeDef;
+
+
+/**
+ * @brief Universal Synchronous Asynchronous Receiver Transmitter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */
+ __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */
+ __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */
+ __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */
+ __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */
+ __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */
+ __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */
+ __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */
+ __IO uint16_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */
+ uint16_t RESERVED1; /*!< Reserved, 0x26 */
+ __IO uint16_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */
+ uint16_t RESERVED2; /*!< Reserved, 0x2A */
+}USART_TypeDef;
+
+/**
+ * @brief Window WATCHDOG
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */
+ __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */
+}WWDG_TypeDef;
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_memory_map
+ * @{
+ */
+
+#define FLASH_BASE ((uint32_t)0x08000000) /*!< FLASH base address in the alias region */
+#define SRAM_BASE ((uint32_t)0x20000000) /*!< SRAM base address in the alias region */
+#define PERIPH_BASE ((uint32_t)0x40000000) /*!< Peripheral base address in the alias region */
+
+/*!< Peripheral memory map */
+#define APBPERIPH_BASE PERIPH_BASE
+#define AHBPERIPH_BASE (PERIPH_BASE + 0x00020000)
+#define AHB2PERIPH_BASE (PERIPH_BASE + 0x08000000)
+
+#define TIM2_BASE (APBPERIPH_BASE + 0x00000000)
+#define TIM3_BASE (APBPERIPH_BASE + 0x00000400)
+#define TIM14_BASE (APBPERIPH_BASE + 0x00002000)
+#define RTC_BASE (APBPERIPH_BASE + 0x00002800)
+#define WWDG_BASE (APBPERIPH_BASE + 0x00002C00)
+#define IWDG_BASE (APBPERIPH_BASE + 0x00003000)
+#define I2C1_BASE (APBPERIPH_BASE + 0x00005400)
+#define PWR_BASE (APBPERIPH_BASE + 0x00007000)
+#define SYSCFG_BASE (APBPERIPH_BASE + 0x00010000)
+#define EXTI_BASE (APBPERIPH_BASE + 0x00010400)
+#define ADC1_BASE (APBPERIPH_BASE + 0x00012400)
+#define ADC_BASE (APBPERIPH_BASE + 0x00012708)
+#define TIM1_BASE (APBPERIPH_BASE + 0x00012C00)
+#define SPI1_BASE (APBPERIPH_BASE + 0x00013000)
+#define USART1_BASE (APBPERIPH_BASE + 0x00013800)
+#define TIM16_BASE (APBPERIPH_BASE + 0x00014400)
+#define TIM17_BASE (APBPERIPH_BASE + 0x00014800)
+#define DBGMCU_BASE (APBPERIPH_BASE + 0x00015800)
+
+#define DMA1_BASE (AHBPERIPH_BASE + 0x00000000)
+#define DMA1_Channel1_BASE (DMA1_BASE + 0x00000008)
+#define DMA1_Channel2_BASE (DMA1_BASE + 0x0000001C)
+#define DMA1_Channel3_BASE (DMA1_BASE + 0x00000030)
+#define DMA1_Channel4_BASE (DMA1_BASE + 0x00000044)
+#define DMA1_Channel5_BASE (DMA1_BASE + 0x00000058)
+
+#define RCC_BASE (AHBPERIPH_BASE + 0x00001000)
+#define FLASH_R_BASE (AHBPERIPH_BASE + 0x00002000) /*!< FLASH registers base address */
+#define OB_BASE ((uint32_t)0x1FFFF800) /*!< FLASH Option Bytes base address */
+#define CRC_BASE (AHBPERIPH_BASE + 0x00003000)
+
+#define GPIOA_BASE (AHB2PERIPH_BASE + 0x00000000)
+#define GPIOB_BASE (AHB2PERIPH_BASE + 0x00000400)
+#define GPIOC_BASE (AHB2PERIPH_BASE + 0x00000800)
+#define GPIOF_BASE (AHB2PERIPH_BASE + 0x00001400)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_declaration
+ * @{
+ */
+
+#define TIM2 ((TIM_TypeDef *) TIM2_BASE)
+#define TIM3 ((TIM_TypeDef *) TIM3_BASE)
+#define TIM14 ((TIM_TypeDef *) TIM14_BASE)
+#define RTC ((RTC_TypeDef *) RTC_BASE)
+#define WWDG ((WWDG_TypeDef *) WWDG_BASE)
+#define IWDG ((IWDG_TypeDef *) IWDG_BASE)
+#define I2C1 ((I2C_TypeDef *) I2C1_BASE)
+#define PWR ((PWR_TypeDef *) PWR_BASE)
+#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE)
+#define EXTI ((EXTI_TypeDef *) EXTI_BASE)
+#define ADC1 ((ADC_TypeDef *) ADC1_BASE)
+#define ADC ((ADC_Common_TypeDef *) ADC_BASE)
+#define TIM1 ((TIM_TypeDef *) TIM1_BASE)
+#define SPI1 ((SPI_TypeDef *) SPI1_BASE)
+#define USART1 ((USART_TypeDef *) USART1_BASE)
+#define TIM16 ((TIM_TypeDef *) TIM16_BASE)
+#define TIM17 ((TIM_TypeDef *) TIM17_BASE)
+#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE)
+#define DMA1 ((DMA_TypeDef *) DMA1_BASE)
+#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE)
+#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE)
+#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE)
+#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE)
+#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE)
+#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE)
+#define OB ((OB_TypeDef *) OB_BASE)
+#define RCC ((RCC_TypeDef *) RCC_BASE)
+#define CRC ((CRC_TypeDef *) CRC_BASE)
+#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE)
+#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE)
+#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE)
+#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_constants
+ * @{
+ */
+
+ /** @addtogroup Peripheral_Registers_Bits_Definition
+ * @{
+ */
+
+/******************************************************************************/
+/* Peripheral Registers Bits Definition */
+/******************************************************************************/
+/******************************************************************************/
+/* */
+/* Analog to Digital Converter (ADC) */
+/* */
+/******************************************************************************/
+/******************** Bits definition for ADC_ISR register ******************/
+#define ADC_ISR_AWD ((uint32_t)0x00000080) /*!< Analog watchdog flag */
+#define ADC_ISR_OVR ((uint32_t)0x00000010) /*!< Overrun flag */
+#define ADC_ISR_EOSEQ ((uint32_t)0x00000008) /*!< End of Sequence flag */
+#define ADC_ISR_EOC ((uint32_t)0x00000004) /*!< End of Conversion */
+#define ADC_ISR_EOSMP ((uint32_t)0x00000002) /*!< End of sampling flag */
+#define ADC_ISR_ADRDY ((uint32_t)0x00000001) /*!< ADC Ready */
+
+/* Old EOSEQ bit definition, maintained for legacy purpose */
+#define ADC_ISR_EOS ADC_ISR_EOSEQ
+
+/******************** Bits definition for ADC_IER register ******************/
+#define ADC_IER_AWDIE ((uint32_t)0x00000080) /*!< Analog Watchdog interrupt enable */
+#define ADC_IER_OVRIE ((uint32_t)0x00000010) /*!< Overrun interrupt enable */
+#define ADC_IER_EOSEQIE ((uint32_t)0x00000008) /*!< End of Sequence of conversion interrupt enable */
+#define ADC_IER_EOCIE ((uint32_t)0x00000004) /*!< End of Conversion interrupt enable */
+#define ADC_IER_EOSMPIE ((uint32_t)0x00000002) /*!< End of sampling interrupt enable */
+#define ADC_IER_ADRDYIE ((uint32_t)0x00000001) /*!< ADC Ready interrupt enable */
+
+/* Old EOSEQIE bit definition, maintained for legacy purpose */
+#define ADC_IER_EOSIE ADC_IER_EOSEQIE
+
+/******************** Bits definition for ADC_CR register *******************/
+#define ADC_CR_ADCAL ((uint32_t)0x80000000) /*!< ADC calibration */
+#define ADC_CR_ADSTP ((uint32_t)0x00000010) /*!< ADC stop of conversion command */
+#define ADC_CR_ADSTART ((uint32_t)0x00000004) /*!< ADC start of conversion */
+#define ADC_CR_ADDIS ((uint32_t)0x00000002) /*!< ADC disable command */
+#define ADC_CR_ADEN ((uint32_t)0x00000001) /*!< ADC enable control */
+
+/******************* Bits definition for ADC_CFGR1 register *****************/
+#define ADC_CFGR1_AWDCH ((uint32_t)0x7C000000) /*!< AWDCH[4:0] bits (Analog watchdog channel select bits) */
+#define ADC_CFGR1_AWDCH_0 ((uint32_t)0x04000000) /*!< Bit 0 */
+#define ADC_CFGR1_AWDCH_1 ((uint32_t)0x08000000) /*!< Bit 1 */
+#define ADC_CFGR1_AWDCH_2 ((uint32_t)0x10000000) /*!< Bit 2 */
+#define ADC_CFGR1_AWDCH_3 ((uint32_t)0x20000000) /*!< Bit 3 */
+#define ADC_CFGR1_AWDCH_4 ((uint32_t)0x40000000) /*!< Bit 4 */
+#define ADC_CFGR1_AWDEN ((uint32_t)0x00800000) /*!< Analog watchdog enable on regular channels */
+#define ADC_CFGR1_AWDSGL ((uint32_t)0x00400000) /*!< Enable the watchdog on a single channel or on all channels */
+#define ADC_CFGR1_DISCEN ((uint32_t)0x00010000) /*!< Discontinuous mode on regular channels */
+#define ADC_CFGR1_AUTOFF ((uint32_t)0x00008000) /*!< ADC auto power off */
+#define ADC_CFGR1_WAIT ((uint32_t)0x00004000) /*!< ADC wait conversion mode */
+#define ADC_CFGR1_CONT ((uint32_t)0x00002000) /*!< Continuous Conversion */
+#define ADC_CFGR1_OVRMOD ((uint32_t)0x00001000) /*!< Overrun mode */
+#define ADC_CFGR1_EXTEN ((uint32_t)0x00000C00) /*!< EXTEN[1:0] bits (External Trigger Conversion mode for regular channels) */
+#define ADC_CFGR1_EXTEN_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define ADC_CFGR1_EXTEN_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define ADC_CFGR1_EXTSEL ((uint32_t)0x000001C0) /*!< EXTSEL[2:0] bits (External Event Select for regular group) */
+#define ADC_CFGR1_EXTSEL_0 ((uint32_t)0x00000040) /*!< Bit 0 */
+#define ADC_CFGR1_EXTSEL_1 ((uint32_t)0x00000080) /*!< Bit 1 */
+#define ADC_CFGR1_EXTSEL_2 ((uint32_t)0x00000100) /*!< Bit 2 */
+#define ADC_CFGR1_ALIGN ((uint32_t)0x00000020) /*!< Data Alignment */
+#define ADC_CFGR1_RES ((uint32_t)0x00000018) /*!< RES[1:0] bits (Resolution) */
+#define ADC_CFGR1_RES_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define ADC_CFGR1_RES_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define ADC_CFGR1_SCANDIR ((uint32_t)0x00000004) /*!< Sequence scan direction */
+#define ADC_CFGR1_DMACFG ((uint32_t)0x00000002) /*!< Direct memory access configuration */
+#define ADC_CFGR1_DMAEN ((uint32_t)0x00000001) /*!< Direct memory access enable */
+
+/* Old WAIT bit definition, maintained for legacy purpose */
+#define ADC_CFGR1_AUTDLY ADC_CFGR1_WAIT
+
+/******************* Bits definition for ADC_CFGR2 register *****************/
+#define ADC_CFGR2_CKMODE ((uint32_t)0xC0000000) /*!< ADC clock mode */
+#define ADC_CFGR2_CKMODE_1 ((uint32_t)0x80000000) /*!< ADC clocked by PCLK div4 */
+#define ADC_CFGR2_CKMODE_0 ((uint32_t)0x40000000) /*!< ADC clocked by PCLK div2 */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_CFGR2_JITOFFDIV4 ADC_CFGR2_CKMODE_1 /*!< ADC clocked by PCLK div4 */
+#define ADC_CFGR2_JITOFFDIV2 ADC_CFGR2_CKMODE_0 /*!< ADC clocked by PCLK div2 */
+
+/****************** Bit definition for ADC_SMPR register ********************/
+#define ADC_SMPR_SMP ((uint32_t)0x00000007) /*!< SMP[2:0] bits (Sampling time selection) */
+#define ADC_SMPR_SMP_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define ADC_SMPR_SMP_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define ADC_SMPR_SMP_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_SMPR1_SMPR ADC_SMPR_SMP /*!< SMP[2:0] bits (Sampling time selection) */
+#define ADC_SMPR1_SMPR_0 ADC_SMPR_SMP_0 /*!< Bit 0 */
+#define ADC_SMPR1_SMPR_1 ADC_SMPR_SMP_1 /*!< Bit 1 */
+#define ADC_SMPR1_SMPR_2 ADC_SMPR_SMP_2 /*!< Bit 2 */
+
+/******************* Bit definition for ADC_TR register ********************/
+#define ADC_TR_HT ((uint32_t)0x0FFF0000) /*!< Analog watchdog high threshold */
+#define ADC_TR_LT ((uint32_t)0x00000FFF) /*!< Analog watchdog low threshold */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_HTR_HT ADC_TR_HT /*!< Analog watchdog high threshold */
+#define ADC_LTR_LT ADC_TR_LT /*!< Analog watchdog low threshold */
+
+/****************** Bit definition for ADC_CHSELR register ******************/
+#define ADC_CHSELR_CHSEL18 ((uint32_t)0x00040000) /*!< Channel 18 selection */
+#define ADC_CHSELR_CHSEL17 ((uint32_t)0x00020000) /*!< Channel 17 selection */
+#define ADC_CHSELR_CHSEL16 ((uint32_t)0x00010000) /*!< Channel 16 selection */
+#define ADC_CHSELR_CHSEL15 ((uint32_t)0x00008000) /*!< Channel 15 selection */
+#define ADC_CHSELR_CHSEL14 ((uint32_t)0x00004000) /*!< Channel 14 selection */
+#define ADC_CHSELR_CHSEL13 ((uint32_t)0x00002000) /*!< Channel 13 selection */
+#define ADC_CHSELR_CHSEL12 ((uint32_t)0x00001000) /*!< Channel 12 selection */
+#define ADC_CHSELR_CHSEL11 ((uint32_t)0x00000800) /*!< Channel 11 selection */
+#define ADC_CHSELR_CHSEL10 ((uint32_t)0x00000400) /*!< Channel 10 selection */
+#define ADC_CHSELR_CHSEL9 ((uint32_t)0x00000200) /*!< Channel 9 selection */
+#define ADC_CHSELR_CHSEL8 ((uint32_t)0x00000100) /*!< Channel 8 selection */
+#define ADC_CHSELR_CHSEL7 ((uint32_t)0x00000080) /*!< Channel 7 selection */
+#define ADC_CHSELR_CHSEL6 ((uint32_t)0x00000040) /*!< Channel 6 selection */
+#define ADC_CHSELR_CHSEL5 ((uint32_t)0x00000020) /*!< Channel 5 selection */
+#define ADC_CHSELR_CHSEL4 ((uint32_t)0x00000010) /*!< Channel 4 selection */
+#define ADC_CHSELR_CHSEL3 ((uint32_t)0x00000008) /*!< Channel 3 selection */
+#define ADC_CHSELR_CHSEL2 ((uint32_t)0x00000004) /*!< Channel 2 selection */
+#define ADC_CHSELR_CHSEL1 ((uint32_t)0x00000002) /*!< Channel 1 selection */
+#define ADC_CHSELR_CHSEL0 ((uint32_t)0x00000001) /*!< Channel 0 selection */
+
+/******************** Bit definition for ADC_DR register ********************/
+#define ADC_DR_DATA ((uint32_t)0x0000FFFF) /*!< Regular data */
+
+/******************* Bit definition for ADC_CCR register ********************/
+#define ADC_CCR_VBATEN ((uint32_t)0x01000000) /*!< Voltage battery enable */
+#define ADC_CCR_TSEN ((uint32_t)0x00800000) /*!< Tempurature sensore enable */
+#define ADC_CCR_VREFEN ((uint32_t)0x00400000) /*!< Vrefint enable */
+
+/******************************************************************************/
+/* */
+/* CRC calculation unit (CRC) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for CRC_DR register *********************/
+#define CRC_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data register bits */
+
+/******************* Bit definition for CRC_IDR register ********************/
+#define CRC_IDR_IDR ((uint8_t)0xFF) /*!< General-purpose 8-bit data register bits */
+
+/******************** Bit definition for CRC_CR register ********************/
+#define CRC_CR_RESET ((uint32_t)0x00000001) /*!< RESET the CRC computation unit bit */
+#define CRC_CR_REV_IN ((uint32_t)0x00000060) /*!< REV_IN Reverse Input Data bits */
+#define CRC_CR_REV_IN_0 ((uint32_t)0x00000020) /*!< REV_IN Bit 0 */
+#define CRC_CR_REV_IN_1 ((uint32_t)0x00000040) /*!< REV_IN Bit 1 */
+#define CRC_CR_REV_OUT ((uint32_t)0x00000080) /*!< REV_OUT Reverse Output Data bits */
+
+/******************* Bit definition for CRC_INIT register *******************/
+#define CRC_INIT_INIT ((uint32_t)0xFFFFFFFF) /*!< Initial CRC value bits */
+
+/******************************************************************************/
+/* */
+/* Debug MCU (DBGMCU) */
+/* */
+/******************************************************************************/
+
+/**************** Bit definition for DBGMCU_IDCODE register *****************/
+#define DBGMCU_IDCODE_DEV_ID ((uint32_t)0x00000FFF) /*!< Device Identifier */
+
+#define DBGMCU_IDCODE_REV_ID ((uint32_t)0xFFFF0000) /*!< REV_ID[15:0] bits (Revision Identifier) */
+#define DBGMCU_IDCODE_REV_ID_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define DBGMCU_IDCODE_REV_ID_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define DBGMCU_IDCODE_REV_ID_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define DBGMCU_IDCODE_REV_ID_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+#define DBGMCU_IDCODE_REV_ID_4 ((uint32_t)0x00100000) /*!< Bit 4 */
+#define DBGMCU_IDCODE_REV_ID_5 ((uint32_t)0x00200000) /*!< Bit 5 */
+#define DBGMCU_IDCODE_REV_ID_6 ((uint32_t)0x00400000) /*!< Bit 6 */
+#define DBGMCU_IDCODE_REV_ID_7 ((uint32_t)0x00800000) /*!< Bit 7 */
+#define DBGMCU_IDCODE_REV_ID_8 ((uint32_t)0x01000000) /*!< Bit 8 */
+#define DBGMCU_IDCODE_REV_ID_9 ((uint32_t)0x02000000) /*!< Bit 9 */
+#define DBGMCU_IDCODE_REV_ID_10 ((uint32_t)0x04000000) /*!< Bit 10 */
+#define DBGMCU_IDCODE_REV_ID_11 ((uint32_t)0x08000000) /*!< Bit 11 */
+#define DBGMCU_IDCODE_REV_ID_12 ((uint32_t)0x10000000) /*!< Bit 12 */
+#define DBGMCU_IDCODE_REV_ID_13 ((uint32_t)0x20000000) /*!< Bit 13 */
+#define DBGMCU_IDCODE_REV_ID_14 ((uint32_t)0x40000000) /*!< Bit 14 */
+#define DBGMCU_IDCODE_REV_ID_15 ((uint32_t)0x80000000) /*!< Bit 15 */
+
+/****************** Bit definition for DBGMCU_CR register *******************/
+#define DBGMCU_CR_DBG_STOP ((uint32_t)0x00000002) /*!< Debug Stop Mode */
+#define DBGMCU_CR_DBG_STANDBY ((uint32_t)0x00000004) /*!< Debug Standby mode */
+
+/****************** Bit definition for DBGMCU_APB1_FZ register **************/
+#define DBGMCU_APB1_FZ_DBG_TIM2_STOP ((uint32_t)0x00000001) /*!< TIM2 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM3_STOP ((uint32_t)0x00000002) /*!< TIM3 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM14_STOP ((uint32_t)0x00000100) /*!< TIM14 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_RTC_STOP ((uint32_t)0x00000400) /*!< RTC Calendar frozen when core is halted */
+#define DBGMCU_APB1_FZ_DBG_WWDG_STOP ((uint32_t)0x00000800) /*!< Debug Window Watchdog stopped when Core is halted */
+#define DBGMCU_APB1_FZ_DBG_IWDG_STOP ((uint32_t)0x00001000) /*!< Debug Independent Watchdog stopped when Core is halted */
+#define DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00200000) /*!< I2C1 SMBUS timeout mode stopped when Core is halted */
+
+/****************** Bit definition for DBGMCU_APB2_FZ register **************/
+#define DBGMCU_APB2_FZ_DBG_TIM1_STOP ((uint32_t)0x00000800) /*!< TIM1 counter stopped when core is halted */
+#define DBGMCU_APB2_FZ_DBG_TIM16_STOP ((uint32_t)0x00020000) /*!< TIM16 counter stopped when core is halted */
+#define DBGMCU_APB2_FZ_DBG_TIM17_STOP ((uint32_t)0x00040000) /*!< TIM17 counter stopped when core is halted */
+
+/******************************************************************************/
+/* */
+/* DMA Controller (DMA) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for DMA_ISR register ********************/
+#define DMA_ISR_GIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt flag */
+#define DMA_ISR_TCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete flag */
+#define DMA_ISR_HTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer flag */
+#define DMA_ISR_TEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error flag */
+#define DMA_ISR_GIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt flag */
+#define DMA_ISR_TCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete flag */
+#define DMA_ISR_HTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer flag */
+#define DMA_ISR_TEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error flag */
+#define DMA_ISR_GIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt flag */
+#define DMA_ISR_TCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete flag */
+#define DMA_ISR_HTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer flag */
+#define DMA_ISR_TEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error flag */
+#define DMA_ISR_GIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt flag */
+#define DMA_ISR_TCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete flag */
+#define DMA_ISR_HTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer flag */
+#define DMA_ISR_TEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error flag */
+#define DMA_ISR_GIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt flag */
+#define DMA_ISR_TCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete flag */
+#define DMA_ISR_HTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer flag */
+#define DMA_ISR_TEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error flag */
+
+/******************* Bit definition for DMA_IFCR register *******************/
+#define DMA_IFCR_CGIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt clear */
+#define DMA_IFCR_CTCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete clear */
+#define DMA_IFCR_CHTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer clear */
+#define DMA_IFCR_CTEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error clear */
+#define DMA_IFCR_CGIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt clear */
+#define DMA_IFCR_CTCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete clear */
+#define DMA_IFCR_CHTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer clear */
+#define DMA_IFCR_CTEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error clear */
+#define DMA_IFCR_CGIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt clear */
+#define DMA_IFCR_CTCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete clear */
+#define DMA_IFCR_CHTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer clear */
+#define DMA_IFCR_CTEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error clear */
+#define DMA_IFCR_CGIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt clear */
+#define DMA_IFCR_CTCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete clear */
+#define DMA_IFCR_CHTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer clear */
+#define DMA_IFCR_CTEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error clear */
+#define DMA_IFCR_CGIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt clear */
+#define DMA_IFCR_CTCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete clear */
+#define DMA_IFCR_CHTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer clear */
+#define DMA_IFCR_CTEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error clear */
+
+/******************* Bit definition for DMA_CCR register ********************/
+#define DMA_CCR_EN ((uint32_t)0x00000001) /*!< Channel enable */
+#define DMA_CCR_TCIE ((uint32_t)0x00000002) /*!< Transfer complete interrupt enable */
+#define DMA_CCR_HTIE ((uint32_t)0x00000004) /*!< Half Transfer interrupt enable */
+#define DMA_CCR_TEIE ((uint32_t)0x00000008) /*!< Transfer error interrupt enable */
+#define DMA_CCR_DIR ((uint32_t)0x00000010) /*!< Data transfer direction */
+#define DMA_CCR_CIRC ((uint32_t)0x00000020) /*!< Circular mode */
+#define DMA_CCR_PINC ((uint32_t)0x00000040) /*!< Peripheral increment mode */
+#define DMA_CCR_MINC ((uint32_t)0x00000080) /*!< Memory increment mode */
+
+#define DMA_CCR_PSIZE ((uint32_t)0x00000300) /*!< PSIZE[1:0] bits (Peripheral size) */
+#define DMA_CCR_PSIZE_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define DMA_CCR_PSIZE_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+
+#define DMA_CCR_MSIZE ((uint32_t)0x00000C00) /*!< MSIZE[1:0] bits (Memory size) */
+#define DMA_CCR_MSIZE_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define DMA_CCR_MSIZE_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+
+#define DMA_CCR_PL ((uint32_t)0x00003000) /*!< PL[1:0] bits(Channel Priority level)*/
+#define DMA_CCR_PL_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define DMA_CCR_PL_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+
+#define DMA_CCR_MEM2MEM ((uint32_t)0x00004000) /*!< Memory to memory mode */
+
+/****************** Bit definition for DMA_CNDTR register *******************/
+#define DMA_CNDTR_NDT ((uint32_t)0x0000FFFF) /*!< Number of data to Transfer */
+
+/****************** Bit definition for DMA_CPAR register ********************/
+#define DMA_CPAR_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */
+
+/****************** Bit definition for DMA_CMAR register ********************/
+#define DMA_CMAR_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */
+
+/******************************************************************************/
+/* */
+/* External Interrupt/Event Controller (EXTI) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for EXTI_IMR register *******************/
+#define EXTI_IMR_MR0 ((uint32_t)0x00000001) /*!< Interrupt Mask on line 0 */
+#define EXTI_IMR_MR1 ((uint32_t)0x00000002) /*!< Interrupt Mask on line 1 */
+#define EXTI_IMR_MR2 ((uint32_t)0x00000004) /*!< Interrupt Mask on line 2 */
+#define EXTI_IMR_MR3 ((uint32_t)0x00000008) /*!< Interrupt Mask on line 3 */
+#define EXTI_IMR_MR4 ((uint32_t)0x00000010) /*!< Interrupt Mask on line 4 */
+#define EXTI_IMR_MR5 ((uint32_t)0x00000020) /*!< Interrupt Mask on line 5 */
+#define EXTI_IMR_MR6 ((uint32_t)0x00000040) /*!< Interrupt Mask on line 6 */
+#define EXTI_IMR_MR7 ((uint32_t)0x00000080) /*!< Interrupt Mask on line 7 */
+#define EXTI_IMR_MR8 ((uint32_t)0x00000100) /*!< Interrupt Mask on line 8 */
+#define EXTI_IMR_MR9 ((uint32_t)0x00000200) /*!< Interrupt Mask on line 9 */
+#define EXTI_IMR_MR10 ((uint32_t)0x00000400) /*!< Interrupt Mask on line 10 */
+#define EXTI_IMR_MR11 ((uint32_t)0x00000800) /*!< Interrupt Mask on line 11 */
+#define EXTI_IMR_MR12 ((uint32_t)0x00001000) /*!< Interrupt Mask on line 12 */
+#define EXTI_IMR_MR13 ((uint32_t)0x00002000) /*!< Interrupt Mask on line 13 */
+#define EXTI_IMR_MR14 ((uint32_t)0x00004000) /*!< Interrupt Mask on line 14 */
+#define EXTI_IMR_MR15 ((uint32_t)0x00008000) /*!< Interrupt Mask on line 15 */
+#define EXTI_IMR_MR16 ((uint32_t)0x00010000) /*!< Interrupt Mask on line 16 */
+#define EXTI_IMR_MR17 ((uint32_t)0x00020000) /*!< Interrupt Mask on line 17 */
+#define EXTI_IMR_MR19 ((uint32_t)0x00080000) /*!< Interrupt Mask on line 19 */
+#define EXTI_IMR_MR21 ((uint32_t)0x00200000) /*!< Interrupt Mask on line 21 */
+#define EXTI_IMR_MR22 ((uint32_t)0x00400000) /*!< Interrupt Mask on line 22 */
+#define EXTI_IMR_MR23 ((uint32_t)0x00800000) /*!< Interrupt Mask on line 23 */
+#define EXTI_IMR_MR25 ((uint32_t)0x02000000) /*!< Interrupt Mask on line 25 */
+#define EXTI_IMR_MR27 ((uint32_t)0x08000000) /*!< Interrupt Mask on line 27 */
+
+/****************** Bit definition for EXTI_EMR register ********************/
+#define EXTI_EMR_MR0 ((uint32_t)0x00000001) /*!< Event Mask on line 0 */
+#define EXTI_EMR_MR1 ((uint32_t)0x00000002) /*!< Event Mask on line 1 */
+#define EXTI_EMR_MR2 ((uint32_t)0x00000004) /*!< Event Mask on line 2 */
+#define EXTI_EMR_MR3 ((uint32_t)0x00000008) /*!< Event Mask on line 3 */
+#define EXTI_EMR_MR4 ((uint32_t)0x00000010) /*!< Event Mask on line 4 */
+#define EXTI_EMR_MR5 ((uint32_t)0x00000020) /*!< Event Mask on line 5 */
+#define EXTI_EMR_MR6 ((uint32_t)0x00000040) /*!< Event Mask on line 6 */
+#define EXTI_EMR_MR7 ((uint32_t)0x00000080) /*!< Event Mask on line 7 */
+#define EXTI_EMR_MR8 ((uint32_t)0x00000100) /*!< Event Mask on line 8 */
+#define EXTI_EMR_MR9 ((uint32_t)0x00000200) /*!< Event Mask on line 9 */
+#define EXTI_EMR_MR10 ((uint32_t)0x00000400) /*!< Event Mask on line 10 */
+#define EXTI_EMR_MR11 ((uint32_t)0x00000800) /*!< Event Mask on line 11 */
+#define EXTI_EMR_MR12 ((uint32_t)0x00001000) /*!< Event Mask on line 12 */
+#define EXTI_EMR_MR13 ((uint32_t)0x00002000) /*!< Event Mask on line 13 */
+#define EXTI_EMR_MR14 ((uint32_t)0x00004000) /*!< Event Mask on line 14 */
+#define EXTI_EMR_MR15 ((uint32_t)0x00008000) /*!< Event Mask on line 15 */
+#define EXTI_EMR_MR16 ((uint32_t)0x00010000) /*!< Event Mask on line 16 */
+#define EXTI_EMR_MR17 ((uint32_t)0x00020000) /*!< Event Mask on line 17 */
+#define EXTI_EMR_MR19 ((uint32_t)0x00080000) /*!< Event Mask on line 19 */
+#define EXTI_EMR_MR21 ((uint32_t)0x00200000) /*!< Event Mask on line 21 */
+#define EXTI_EMR_MR22 ((uint32_t)0x00400000) /*!< Event Mask on line 22 */
+#define EXTI_EMR_MR23 ((uint32_t)0x00800000) /*!< Event Mask on line 23 */
+#define EXTI_EMR_MR25 ((uint32_t)0x02000000) /*!< Event Mask on line 25 */
+#define EXTI_EMR_MR27 ((uint32_t)0x08000000) /*!< Event Mask on line 27 */
+
+/******************* Bit definition for EXTI_RTSR register ******************/
+#define EXTI_RTSR_TR0 ((uint32_t)0x00000001) /*!< Rising trigger event configuration bit of line 0 */
+#define EXTI_RTSR_TR1 ((uint32_t)0x00000002) /*!< Rising trigger event configuration bit of line 1 */
+#define EXTI_RTSR_TR2 ((uint32_t)0x00000004) /*!< Rising trigger event configuration bit of line 2 */
+#define EXTI_RTSR_TR3 ((uint32_t)0x00000008) /*!< Rising trigger event configuration bit of line 3 */
+#define EXTI_RTSR_TR4 ((uint32_t)0x00000010) /*!< Rising trigger event configuration bit of line 4 */
+#define EXTI_RTSR_TR5 ((uint32_t)0x00000020) /*!< Rising trigger event configuration bit of line 5 */
+#define EXTI_RTSR_TR6 ((uint32_t)0x00000040) /*!< Rising trigger event configuration bit of line 6 */
+#define EXTI_RTSR_TR7 ((uint32_t)0x00000080) /*!< Rising trigger event configuration bit of line 7 */
+#define EXTI_RTSR_TR8 ((uint32_t)0x00000100) /*!< Rising trigger event configuration bit of line 8 */
+#define EXTI_RTSR_TR9 ((uint32_t)0x00000200) /*!< Rising trigger event configuration bit of line 9 */
+#define EXTI_RTSR_TR10 ((uint32_t)0x00000400) /*!< Rising trigger event configuration bit of line 10 */
+#define EXTI_RTSR_TR11 ((uint32_t)0x00000800) /*!< Rising trigger event configuration bit of line 11 */
+#define EXTI_RTSR_TR12 ((uint32_t)0x00001000) /*!< Rising trigger event configuration bit of line 12 */
+#define EXTI_RTSR_TR13 ((uint32_t)0x00002000) /*!< Rising trigger event configuration bit of line 13 */
+#define EXTI_RTSR_TR14 ((uint32_t)0x00004000) /*!< Rising trigger event configuration bit of line 14 */
+#define EXTI_RTSR_TR15 ((uint32_t)0x00008000) /*!< Rising trigger event configuration bit of line 15 */
+#define EXTI_RTSR_TR16 ((uint32_t)0x00010000) /*!< Rising trigger event configuration bit of line 16 */
+#define EXTI_RTSR_TR17 ((uint32_t)0x00020000) /*!< Rising trigger event configuration bit of line 17 */
+#define EXTI_RTSR_TR19 ((uint32_t)0x00080000) /*!< Rising trigger event configuration bit of line 19 */
+
+/******************* Bit definition for EXTI_FTSR register *******************/
+#define EXTI_FTSR_TR0 ((uint32_t)0x00000001) /*!< Falling trigger event configuration bit of line 0 */
+#define EXTI_FTSR_TR1 ((uint32_t)0x00000002) /*!< Falling trigger event configuration bit of line 1 */
+#define EXTI_FTSR_TR2 ((uint32_t)0x00000004) /*!< Falling trigger event configuration bit of line 2 */
+#define EXTI_FTSR_TR3 ((uint32_t)0x00000008) /*!< Falling trigger event configuration bit of line 3 */
+#define EXTI_FTSR_TR4 ((uint32_t)0x00000010) /*!< Falling trigger event configuration bit of line 4 */
+#define EXTI_FTSR_TR5 ((uint32_t)0x00000020) /*!< Falling trigger event configuration bit of line 5 */
+#define EXTI_FTSR_TR6 ((uint32_t)0x00000040) /*!< Falling trigger event configuration bit of line 6 */
+#define EXTI_FTSR_TR7 ((uint32_t)0x00000080) /*!< Falling trigger event configuration bit of line 7 */
+#define EXTI_FTSR_TR8 ((uint32_t)0x00000100) /*!< Falling trigger event configuration bit of line 8 */
+#define EXTI_FTSR_TR9 ((uint32_t)0x00000200) /*!< Falling trigger event configuration bit of line 9 */
+#define EXTI_FTSR_TR10 ((uint32_t)0x00000400) /*!< Falling trigger event configuration bit of line 10 */
+#define EXTI_FTSR_TR11 ((uint32_t)0x00000800) /*!< Falling trigger event configuration bit of line 11 */
+#define EXTI_FTSR_TR12 ((uint32_t)0x00001000) /*!< Falling trigger event configuration bit of line 12 */
+#define EXTI_FTSR_TR13 ((uint32_t)0x00002000) /*!< Falling trigger event configuration bit of line 13 */
+#define EXTI_FTSR_TR14 ((uint32_t)0x00004000) /*!< Falling trigger event configuration bit of line 14 */
+#define EXTI_FTSR_TR15 ((uint32_t)0x00008000) /*!< Falling trigger event configuration bit of line 15 */
+#define EXTI_FTSR_TR16 ((uint32_t)0x00010000) /*!< Falling trigger event configuration bit of line 16 */
+#define EXTI_FTSR_TR17 ((uint32_t)0x00020000) /*!< Falling trigger event configuration bit of line 17 */
+#define EXTI_FTSR_TR19 ((uint32_t)0x00080000) /*!< Falling trigger event configuration bit of line 19 */
+
+/******************* Bit definition for EXTI_SWIER register *******************/
+#define EXTI_SWIER_SWIER0 ((uint32_t)0x00000001) /*!< Software Interrupt on line 0 */
+#define EXTI_SWIER_SWIER1 ((uint32_t)0x00000002) /*!< Software Interrupt on line 1 */
+#define EXTI_SWIER_SWIER2 ((uint32_t)0x00000004) /*!< Software Interrupt on line 2 */
+#define EXTI_SWIER_SWIER3 ((uint32_t)0x00000008) /*!< Software Interrupt on line 3 */
+#define EXTI_SWIER_SWIER4 ((uint32_t)0x00000010) /*!< Software Interrupt on line 4 */
+#define EXTI_SWIER_SWIER5 ((uint32_t)0x00000020) /*!< Software Interrupt on line 5 */
+#define EXTI_SWIER_SWIER6 ((uint32_t)0x00000040) /*!< Software Interrupt on line 6 */
+#define EXTI_SWIER_SWIER7 ((uint32_t)0x00000080) /*!< Software Interrupt on line 7 */
+#define EXTI_SWIER_SWIER8 ((uint32_t)0x00000100) /*!< Software Interrupt on line 8 */
+#define EXTI_SWIER_SWIER9 ((uint32_t)0x00000200) /*!< Software Interrupt on line 9 */
+#define EXTI_SWIER_SWIER10 ((uint32_t)0x00000400) /*!< Software Interrupt on line 10 */
+#define EXTI_SWIER_SWIER11 ((uint32_t)0x00000800) /*!< Software Interrupt on line 11 */
+#define EXTI_SWIER_SWIER12 ((uint32_t)0x00001000) /*!< Software Interrupt on line 12 */
+#define EXTI_SWIER_SWIER13 ((uint32_t)0x00002000) /*!< Software Interrupt on line 13 */
+#define EXTI_SWIER_SWIER14 ((uint32_t)0x00004000) /*!< Software Interrupt on line 14 */
+#define EXTI_SWIER_SWIER15 ((uint32_t)0x00008000) /*!< Software Interrupt on line 15 */
+#define EXTI_SWIER_SWIER16 ((uint32_t)0x00010000) /*!< Software Interrupt on line 16 */
+#define EXTI_SWIER_SWIER17 ((uint32_t)0x00020000) /*!< Software Interrupt on line 17 */
+#define EXTI_SWIER_SWIER19 ((uint32_t)0x00080000) /*!< Software Interrupt on line 19 */
+
+/****************** Bit definition for EXTI_PR register *********************/
+#define EXTI_PR_PR0 ((uint32_t)0x00000001) /*!< Pending bit 0 */
+#define EXTI_PR_PR1 ((uint32_t)0x00000002) /*!< Pending bit 1 */
+#define EXTI_PR_PR2 ((uint32_t)0x00000004) /*!< Pending bit 2 */
+#define EXTI_PR_PR3 ((uint32_t)0x00000008) /*!< Pending bit 3 */
+#define EXTI_PR_PR4 ((uint32_t)0x00000010) /*!< Pending bit 4 */
+#define EXTI_PR_PR5 ((uint32_t)0x00000020) /*!< Pending bit 5 */
+#define EXTI_PR_PR6 ((uint32_t)0x00000040) /*!< Pending bit 6 */
+#define EXTI_PR_PR7 ((uint32_t)0x00000080) /*!< Pending bit 7 */
+#define EXTI_PR_PR8 ((uint32_t)0x00000100) /*!< Pending bit 8 */
+#define EXTI_PR_PR9 ((uint32_t)0x00000200) /*!< Pending bit 9 */
+#define EXTI_PR_PR10 ((uint32_t)0x00000400) /*!< Pending bit 10 */
+#define EXTI_PR_PR11 ((uint32_t)0x00000800) /*!< Pending bit 11 */
+#define EXTI_PR_PR12 ((uint32_t)0x00001000) /*!< Pending bit 12 */
+#define EXTI_PR_PR13 ((uint32_t)0x00002000) /*!< Pending bit 13 */
+#define EXTI_PR_PR14 ((uint32_t)0x00004000) /*!< Pending bit 14 */
+#define EXTI_PR_PR15 ((uint32_t)0x00008000) /*!< Pending bit 15 */
+#define EXTI_PR_PR16 ((uint32_t)0x00010000) /*!< Pending bit 16 */
+#define EXTI_PR_PR17 ((uint32_t)0x00020000) /*!< Pending bit 17 */
+#define EXTI_PR_PR19 ((uint32_t)0x00080000) /*!< Pending bit 19 */
+
+/******************************************************************************/
+/* */
+/* FLASH and Option Bytes Registers */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for FLASH_ACR register ******************/
+#define FLASH_ACR_LATENCY ((uint32_t)0x00000001) /*!< LATENCY bit (Latency) */
+
+#define FLASH_ACR_PRFTBE ((uint32_t)0x00000010) /*!< Prefetch Buffer Enable */
+#define FLASH_ACR_PRFTBS ((uint32_t)0x00000020) /*!< Prefetch Buffer Status */
+
+/****************** Bit definition for FLASH_KEYR register ******************/
+#define FLASH_KEYR_FKEYR ((uint32_t)0xFFFFFFFF) /*!< FPEC Key */
+
+/***************** Bit definition for FLASH_OPTKEYR register ****************/
+#define FLASH_OPTKEYR_OPTKEYR ((uint32_t)0xFFFFFFFF) /*!< Option Byte Key */
+
+/****************** FLASH Keys **********************************************/
+#define FLASH_FKEY1 ((uint32_t)0x45670123) /*!< Flash program erase key1 */
+#define FLASH_FKEY2 ((uint32_t)0xCDEF89AB) /*!< Flash program erase key2: used with FLASH_PEKEY1
+ to unlock the write access to the FPEC. */
+
+#define FLASH_OPTKEY1 ((uint32_t)0x45670123) /*!< Flash option key1 */
+#define FLASH_OPTKEY2 ((uint32_t)0xCDEF89AB) /*!< Flash option key2: used with FLASH_OPTKEY1 to
+ unlock the write access to the option byte block */
+
+/****************** Bit definition for FLASH_SR register *******************/
+#define FLASH_SR_BSY ((uint32_t)0x00000001) /*!< Busy */
+#define FLASH_SR_PGERR ((uint32_t)0x00000004) /*!< Programming Error */
+#define FLASH_SR_WRPRTERR ((uint32_t)0x00000010) /*!< Write Protection Error */
+#define FLASH_SR_EOP ((uint32_t)0x00000020) /*!< End of operation */
+#define FLASH_SR_WRPERR FLASH_SR_WRPRTERR /*!< Legacy of Write Protection Error */
+
+/******************* Bit definition for FLASH_CR register *******************/
+#define FLASH_CR_PG ((uint32_t)0x00000001) /*!< Programming */
+#define FLASH_CR_PER ((uint32_t)0x00000002) /*!< Page Erase */
+#define FLASH_CR_MER ((uint32_t)0x00000004) /*!< Mass Erase */
+#define FLASH_CR_OPTPG ((uint32_t)0x00000010) /*!< Option Byte Programming */
+#define FLASH_CR_OPTER ((uint32_t)0x00000020) /*!< Option Byte Erase */
+#define FLASH_CR_STRT ((uint32_t)0x00000040) /*!< Start */
+#define FLASH_CR_LOCK ((uint32_t)0x00000080) /*!< Lock */
+#define FLASH_CR_OPTWRE ((uint32_t)0x00000200) /*!< Option Bytes Write Enable */
+#define FLASH_CR_ERRIE ((uint32_t)0x00000400) /*!< Error Interrupt Enable */
+#define FLASH_CR_EOPIE ((uint32_t)0x00001000) /*!< End of operation interrupt enable */
+#define FLASH_CR_OBL_LAUNCH ((uint32_t)0x00002000) /*!< Option Bytes Loader Launch */
+
+/******************* Bit definition for FLASH_AR register *******************/
+#define FLASH_AR_FAR ((uint32_t)0xFFFFFFFF) /*!< Flash Address */
+
+/****************** Bit definition for FLASH_OBR register *******************/
+#define FLASH_OBR_OPTERR ((uint32_t)0x00000001) /*!< Option Byte Error */
+#define FLASH_OBR_RDPRT1 ((uint32_t)0x00000002) /*!< Read protection Level 1 */
+#define FLASH_OBR_RDPRT2 ((uint32_t)0x00000004) /*!< Read protection Level 2 */
+
+#define FLASH_OBR_USER ((uint32_t)0x00003700) /*!< User Option Bytes */
+#define FLASH_OBR_IWDG_SW ((uint32_t)0x00000100) /*!< IWDG SW */
+#define FLASH_OBR_nRST_STOP ((uint32_t)0x00000200) /*!< nRST_STOP */
+#define FLASH_OBR_nRST_STDBY ((uint32_t)0x00000400) /*!< nRST_STDBY */
+#define FLASH_OBR_nBOOT1 ((uint32_t)0x00001000) /*!< nBOOT1 */
+#define FLASH_OBR_VDDA_MONITOR ((uint32_t)0x00002000) /*!< VDDA power supply supervisor */
+
+/* Old BOOT1 bit definition, maintained for legacy purpose */
+#define FLASH_OBR_BOOT1 FLASH_OBR_nBOOT1
+
+/* Old OBR_VDDA bit definition, maintained for legacy purpose */
+#define FLASH_OBR_VDDA_ANALOG FLASH_OBR_VDDA_MONITOR
+
+/****************** Bit definition for FLASH_WRPR register ******************/
+#define FLASH_WRPR_WRP ((uint32_t)0x0000FFFF) /*!< Write Protect */
+
+/*----------------------------------------------------------------------------*/
+
+/****************** Bit definition for OB_RDP register **********************/
+#define OB_RDP_RDP ((uint32_t)0x000000FF) /*!< Read protection option byte */
+#define OB_RDP_nRDP ((uint32_t)0x0000FF00) /*!< Read protection complemented option byte */
+
+/****************** Bit definition for OB_USER register *********************/
+#define OB_USER_USER ((uint32_t)0x00FF0000) /*!< User option byte */
+#define OB_USER_nUSER ((uint32_t)0xFF000000) /*!< User complemented option byte */
+
+/****************** Bit definition for OB_WRP0 register *********************/
+#define OB_WRP0_WRP0 ((uint32_t)0x000000FF) /*!< Flash memory write protection option bytes */
+#define OB_WRP0_nWRP0 ((uint32_t)0x0000FF00) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for OB_WRP1 register *********************/
+#define OB_WRP1_WRP1 ((uint32_t)0x00FF0000) /*!< Flash memory write protection option bytes */
+#define OB_WRP1_nWRP1 ((uint32_t)0xFF000000) /*!< Flash memory write protection complemented option bytes */
+
+/******************************************************************************/
+/* */
+/* General Purpose IOs (GPIO) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for GPIO_MODER register *****************/
+#define GPIO_MODER_MODER0 ((uint32_t)0x00000003)
+#define GPIO_MODER_MODER0_0 ((uint32_t)0x00000001)
+#define GPIO_MODER_MODER0_1 ((uint32_t)0x00000002)
+#define GPIO_MODER_MODER1 ((uint32_t)0x0000000C)
+#define GPIO_MODER_MODER1_0 ((uint32_t)0x00000004)
+#define GPIO_MODER_MODER1_1 ((uint32_t)0x00000008)
+#define GPIO_MODER_MODER2 ((uint32_t)0x00000030)
+#define GPIO_MODER_MODER2_0 ((uint32_t)0x00000010)
+#define GPIO_MODER_MODER2_1 ((uint32_t)0x00000020)
+#define GPIO_MODER_MODER3 ((uint32_t)0x000000C0)
+#define GPIO_MODER_MODER3_0 ((uint32_t)0x00000040)
+#define GPIO_MODER_MODER3_1 ((uint32_t)0x00000080)
+#define GPIO_MODER_MODER4 ((uint32_t)0x00000300)
+#define GPIO_MODER_MODER4_0 ((uint32_t)0x00000100)
+#define GPIO_MODER_MODER4_1 ((uint32_t)0x00000200)
+#define GPIO_MODER_MODER5 ((uint32_t)0x00000C00)
+#define GPIO_MODER_MODER5_0 ((uint32_t)0x00000400)
+#define GPIO_MODER_MODER5_1 ((uint32_t)0x00000800)
+#define GPIO_MODER_MODER6 ((uint32_t)0x00003000)
+#define GPIO_MODER_MODER6_0 ((uint32_t)0x00001000)
+#define GPIO_MODER_MODER6_1 ((uint32_t)0x00002000)
+#define GPIO_MODER_MODER7 ((uint32_t)0x0000C000)
+#define GPIO_MODER_MODER7_0 ((uint32_t)0x00004000)
+#define GPIO_MODER_MODER7_1 ((uint32_t)0x00008000)
+#define GPIO_MODER_MODER8 ((uint32_t)0x00030000)
+#define GPIO_MODER_MODER8_0 ((uint32_t)0x00010000)
+#define GPIO_MODER_MODER8_1 ((uint32_t)0x00020000)
+#define GPIO_MODER_MODER9 ((uint32_t)0x000C0000)
+#define GPIO_MODER_MODER9_0 ((uint32_t)0x00040000)
+#define GPIO_MODER_MODER9_1 ((uint32_t)0x00080000)
+#define GPIO_MODER_MODER10 ((uint32_t)0x00300000)
+#define GPIO_MODER_MODER10_0 ((uint32_t)0x00100000)
+#define GPIO_MODER_MODER10_1 ((uint32_t)0x00200000)
+#define GPIO_MODER_MODER11 ((uint32_t)0x00C00000)
+#define GPIO_MODER_MODER11_0 ((uint32_t)0x00400000)
+#define GPIO_MODER_MODER11_1 ((uint32_t)0x00800000)
+#define GPIO_MODER_MODER12 ((uint32_t)0x03000000)
+#define GPIO_MODER_MODER12_0 ((uint32_t)0x01000000)
+#define GPIO_MODER_MODER12_1 ((uint32_t)0x02000000)
+#define GPIO_MODER_MODER13 ((uint32_t)0x0C000000)
+#define GPIO_MODER_MODER13_0 ((uint32_t)0x04000000)
+#define GPIO_MODER_MODER13_1 ((uint32_t)0x08000000)
+#define GPIO_MODER_MODER14 ((uint32_t)0x30000000)
+#define GPIO_MODER_MODER14_0 ((uint32_t)0x10000000)
+#define GPIO_MODER_MODER14_1 ((uint32_t)0x20000000)
+#define GPIO_MODER_MODER15 ((uint32_t)0xC0000000)
+#define GPIO_MODER_MODER15_0 ((uint32_t)0x40000000)
+#define GPIO_MODER_MODER15_1 ((uint32_t)0x80000000)
+
+/****************** Bit definition for GPIO_OTYPER register *****************/
+#define GPIO_OTYPER_OT_0 ((uint32_t)0x00000001)
+#define GPIO_OTYPER_OT_1 ((uint32_t)0x00000002)
+#define GPIO_OTYPER_OT_2 ((uint32_t)0x00000004)
+#define GPIO_OTYPER_OT_3 ((uint32_t)0x00000008)
+#define GPIO_OTYPER_OT_4 ((uint32_t)0x00000010)
+#define GPIO_OTYPER_OT_5 ((uint32_t)0x00000020)
+#define GPIO_OTYPER_OT_6 ((uint32_t)0x00000040)
+#define GPIO_OTYPER_OT_7 ((uint32_t)0x00000080)
+#define GPIO_OTYPER_OT_8 ((uint32_t)0x00000100)
+#define GPIO_OTYPER_OT_9 ((uint32_t)0x00000200)
+#define GPIO_OTYPER_OT_10 ((uint32_t)0x00000400)
+#define GPIO_OTYPER_OT_11 ((uint32_t)0x00000800)
+#define GPIO_OTYPER_OT_12 ((uint32_t)0x00001000)
+#define GPIO_OTYPER_OT_13 ((uint32_t)0x00002000)
+#define GPIO_OTYPER_OT_14 ((uint32_t)0x00004000)
+#define GPIO_OTYPER_OT_15 ((uint32_t)0x00008000)
+
+/**************** Bit definition for GPIO_OSPEEDR register ******************/
+#define GPIO_OSPEEDR_OSPEEDR0 ((uint32_t)0x00000003)
+#define GPIO_OSPEEDR_OSPEEDR0_0 ((uint32_t)0x00000001)
+#define GPIO_OSPEEDR_OSPEEDR0_1 ((uint32_t)0x00000002)
+#define GPIO_OSPEEDR_OSPEEDR1 ((uint32_t)0x0000000C)
+#define GPIO_OSPEEDR_OSPEEDR1_0 ((uint32_t)0x00000004)
+#define GPIO_OSPEEDR_OSPEEDR1_1 ((uint32_t)0x00000008)
+#define GPIO_OSPEEDR_OSPEEDR2 ((uint32_t)0x00000030)
+#define GPIO_OSPEEDR_OSPEEDR2_0 ((uint32_t)0x00000010)
+#define GPIO_OSPEEDR_OSPEEDR2_1 ((uint32_t)0x00000020)
+#define GPIO_OSPEEDR_OSPEEDR3 ((uint32_t)0x000000C0)
+#define GPIO_OSPEEDR_OSPEEDR3_0 ((uint32_t)0x00000040)
+#define GPIO_OSPEEDR_OSPEEDR3_1 ((uint32_t)0x00000080)
+#define GPIO_OSPEEDR_OSPEEDR4 ((uint32_t)0x00000300)
+#define GPIO_OSPEEDR_OSPEEDR4_0 ((uint32_t)0x00000100)
+#define GPIO_OSPEEDR_OSPEEDR4_1 ((uint32_t)0x00000200)
+#define GPIO_OSPEEDR_OSPEEDR5 ((uint32_t)0x00000C00)
+#define GPIO_OSPEEDR_OSPEEDR5_0 ((uint32_t)0x00000400)
+#define GPIO_OSPEEDR_OSPEEDR5_1 ((uint32_t)0x00000800)
+#define GPIO_OSPEEDR_OSPEEDR6 ((uint32_t)0x00003000)
+#define GPIO_OSPEEDR_OSPEEDR6_0 ((uint32_t)0x00001000)
+#define GPIO_OSPEEDR_OSPEEDR6_1 ((uint32_t)0x00002000)
+#define GPIO_OSPEEDR_OSPEEDR7 ((uint32_t)0x0000C000)
+#define GPIO_OSPEEDR_OSPEEDR7_0 ((uint32_t)0x00004000)
+#define GPIO_OSPEEDR_OSPEEDR7_1 ((uint32_t)0x00008000)
+#define GPIO_OSPEEDR_OSPEEDR8 ((uint32_t)0x00030000)
+#define GPIO_OSPEEDR_OSPEEDR8_0 ((uint32_t)0x00010000)
+#define GPIO_OSPEEDR_OSPEEDR8_1 ((uint32_t)0x00020000)
+#define GPIO_OSPEEDR_OSPEEDR9 ((uint32_t)0x000C0000)
+#define GPIO_OSPEEDR_OSPEEDR9_0 ((uint32_t)0x00040000)
+#define GPIO_OSPEEDR_OSPEEDR9_1 ((uint32_t)0x00080000)
+#define GPIO_OSPEEDR_OSPEEDR10 ((uint32_t)0x00300000)
+#define GPIO_OSPEEDR_OSPEEDR10_0 ((uint32_t)0x00100000)
+#define GPIO_OSPEEDR_OSPEEDR10_1 ((uint32_t)0x00200000)
+#define GPIO_OSPEEDR_OSPEEDR11 ((uint32_t)0x00C00000)
+#define GPIO_OSPEEDR_OSPEEDR11_0 ((uint32_t)0x00400000)
+#define GPIO_OSPEEDR_OSPEEDR11_1 ((uint32_t)0x00800000)
+#define GPIO_OSPEEDR_OSPEEDR12 ((uint32_t)0x03000000)
+#define GPIO_OSPEEDR_OSPEEDR12_0 ((uint32_t)0x01000000)
+#define GPIO_OSPEEDR_OSPEEDR12_1 ((uint32_t)0x02000000)
+#define GPIO_OSPEEDR_OSPEEDR13 ((uint32_t)0x0C000000)
+#define GPIO_OSPEEDR_OSPEEDR13_0 ((uint32_t)0x04000000)
+#define GPIO_OSPEEDR_OSPEEDR13_1 ((uint32_t)0x08000000)
+#define GPIO_OSPEEDR_OSPEEDR14 ((uint32_t)0x30000000)
+#define GPIO_OSPEEDR_OSPEEDR14_0 ((uint32_t)0x10000000)
+#define GPIO_OSPEEDR_OSPEEDR14_1 ((uint32_t)0x20000000)
+#define GPIO_OSPEEDR_OSPEEDR15 ((uint32_t)0xC0000000)
+#define GPIO_OSPEEDR_OSPEEDR15_0 ((uint32_t)0x40000000)
+#define GPIO_OSPEEDR_OSPEEDR15_1 ((uint32_t)0x80000000)
+
+/* Old Bit definition for GPIO_OSPEEDR register maintained for legacy purpose */
+#define GPIO_OSPEEDER_OSPEEDR0 GPIO_OSPEEDR_OSPEEDR0
+#define GPIO_OSPEEDER_OSPEEDR0_0 GPIO_OSPEEDR_OSPEEDR0_0
+#define GPIO_OSPEEDER_OSPEEDR0_1 GPIO_OSPEEDR_OSPEEDR0_1
+#define GPIO_OSPEEDER_OSPEEDR1 GPIO_OSPEEDR_OSPEEDR1
+#define GPIO_OSPEEDER_OSPEEDR1_0 GPIO_OSPEEDR_OSPEEDR1_0
+#define GPIO_OSPEEDER_OSPEEDR1_1 GPIO_OSPEEDR_OSPEEDR1_1
+#define GPIO_OSPEEDER_OSPEEDR2 GPIO_OSPEEDR_OSPEEDR2
+#define GPIO_OSPEEDER_OSPEEDR2_0 GPIO_OSPEEDR_OSPEEDR2_0
+#define GPIO_OSPEEDER_OSPEEDR2_1 GPIO_OSPEEDR_OSPEEDR2_1
+#define GPIO_OSPEEDER_OSPEEDR3 GPIO_OSPEEDR_OSPEEDR3
+#define GPIO_OSPEEDER_OSPEEDR3_0 GPIO_OSPEEDR_OSPEEDR3_0
+#define GPIO_OSPEEDER_OSPEEDR3_1 GPIO_OSPEEDR_OSPEEDR3_1
+#define GPIO_OSPEEDER_OSPEEDR4 GPIO_OSPEEDR_OSPEEDR4
+#define GPIO_OSPEEDER_OSPEEDR4_0 GPIO_OSPEEDR_OSPEEDR4_0
+#define GPIO_OSPEEDER_OSPEEDR4_1 GPIO_OSPEEDR_OSPEEDR4_1
+#define GPIO_OSPEEDER_OSPEEDR5 GPIO_OSPEEDR_OSPEEDR5
+#define GPIO_OSPEEDER_OSPEEDR5_0 GPIO_OSPEEDR_OSPEEDR5_0
+#define GPIO_OSPEEDER_OSPEEDR5_1 GPIO_OSPEEDR_OSPEEDR5_1
+#define GPIO_OSPEEDER_OSPEEDR6 GPIO_OSPEEDR_OSPEEDR6
+#define GPIO_OSPEEDER_OSPEEDR6_0 GPIO_OSPEEDR_OSPEEDR6_0
+#define GPIO_OSPEEDER_OSPEEDR6_1 GPIO_OSPEEDR_OSPEEDR6_1
+#define GPIO_OSPEEDER_OSPEEDR7 GPIO_OSPEEDR_OSPEEDR7
+#define GPIO_OSPEEDER_OSPEEDR7_0 GPIO_OSPEEDR_OSPEEDR7_0
+#define GPIO_OSPEEDER_OSPEEDR7_1 GPIO_OSPEEDR_OSPEEDR7_1
+#define GPIO_OSPEEDER_OSPEEDR8 GPIO_OSPEEDR_OSPEEDR8
+#define GPIO_OSPEEDER_OSPEEDR8_0 GPIO_OSPEEDR_OSPEEDR8_0
+#define GPIO_OSPEEDER_OSPEEDR8_1 GPIO_OSPEEDR_OSPEEDR8_1
+#define GPIO_OSPEEDER_OSPEEDR9 GPIO_OSPEEDR_OSPEEDR9
+#define GPIO_OSPEEDER_OSPEEDR9_0 GPIO_OSPEEDR_OSPEEDR9_0
+#define GPIO_OSPEEDER_OSPEEDR9_1 GPIO_OSPEEDR_OSPEEDR9_1
+#define GPIO_OSPEEDER_OSPEEDR10 GPIO_OSPEEDR_OSPEEDR10
+#define GPIO_OSPEEDER_OSPEEDR10_0 GPIO_OSPEEDR_OSPEEDR10_0
+#define GPIO_OSPEEDER_OSPEEDR10_1 GPIO_OSPEEDR_OSPEEDR10_1
+#define GPIO_OSPEEDER_OSPEEDR11 GPIO_OSPEEDR_OSPEEDR11
+#define GPIO_OSPEEDER_OSPEEDR11_0 GPIO_OSPEEDR_OSPEEDR11_0
+#define GPIO_OSPEEDER_OSPEEDR11_1 GPIO_OSPEEDR_OSPEEDR11_1
+#define GPIO_OSPEEDER_OSPEEDR12 GPIO_OSPEEDR_OSPEEDR12
+#define GPIO_OSPEEDER_OSPEEDR12_0 GPIO_OSPEEDR_OSPEEDR12_0
+#define GPIO_OSPEEDER_OSPEEDR12_1 GPIO_OSPEEDR_OSPEEDR12_1
+#define GPIO_OSPEEDER_OSPEEDR13 GPIO_OSPEEDR_OSPEEDR13
+#define GPIO_OSPEEDER_OSPEEDR13_0 GPIO_OSPEEDR_OSPEEDR13_0
+#define GPIO_OSPEEDER_OSPEEDR13_1 GPIO_OSPEEDR_OSPEEDR13_1
+#define GPIO_OSPEEDER_OSPEEDR14 GPIO_OSPEEDR_OSPEEDR14
+#define GPIO_OSPEEDER_OSPEEDR14_0 GPIO_OSPEEDR_OSPEEDR14_0
+#define GPIO_OSPEEDER_OSPEEDR14_1 GPIO_OSPEEDR_OSPEEDR14_1
+#define GPIO_OSPEEDER_OSPEEDR15 GPIO_OSPEEDR_OSPEEDR15
+#define GPIO_OSPEEDER_OSPEEDR15_0 GPIO_OSPEEDR_OSPEEDR15_0
+#define GPIO_OSPEEDER_OSPEEDR15_1 GPIO_OSPEEDR_OSPEEDR15_1
+
+/******************* Bit definition for GPIO_PUPDR register ******************/
+#define GPIO_PUPDR_PUPDR0 ((uint32_t)0x00000003)
+#define GPIO_PUPDR_PUPDR0_0 ((uint32_t)0x00000001)
+#define GPIO_PUPDR_PUPDR0_1 ((uint32_t)0x00000002)
+#define GPIO_PUPDR_PUPDR1 ((uint32_t)0x0000000C)
+#define GPIO_PUPDR_PUPDR1_0 ((uint32_t)0x00000004)
+#define GPIO_PUPDR_PUPDR1_1 ((uint32_t)0x00000008)
+#define GPIO_PUPDR_PUPDR2 ((uint32_t)0x00000030)
+#define GPIO_PUPDR_PUPDR2_0 ((uint32_t)0x00000010)
+#define GPIO_PUPDR_PUPDR2_1 ((uint32_t)0x00000020)
+#define GPIO_PUPDR_PUPDR3 ((uint32_t)0x000000C0)
+#define GPIO_PUPDR_PUPDR3_0 ((uint32_t)0x00000040)
+#define GPIO_PUPDR_PUPDR3_1 ((uint32_t)0x00000080)
+#define GPIO_PUPDR_PUPDR4 ((uint32_t)0x00000300)
+#define GPIO_PUPDR_PUPDR4_0 ((uint32_t)0x00000100)
+#define GPIO_PUPDR_PUPDR4_1 ((uint32_t)0x00000200)
+#define GPIO_PUPDR_PUPDR5 ((uint32_t)0x00000C00)
+#define GPIO_PUPDR_PUPDR5_0 ((uint32_t)0x00000400)
+#define GPIO_PUPDR_PUPDR5_1 ((uint32_t)0x00000800)
+#define GPIO_PUPDR_PUPDR6 ((uint32_t)0x00003000)
+#define GPIO_PUPDR_PUPDR6_0 ((uint32_t)0x00001000)
+#define GPIO_PUPDR_PUPDR6_1 ((uint32_t)0x00002000)
+#define GPIO_PUPDR_PUPDR7 ((uint32_t)0x0000C000)
+#define GPIO_PUPDR_PUPDR7_0 ((uint32_t)0x00004000)
+#define GPIO_PUPDR_PUPDR7_1 ((uint32_t)0x00008000)
+#define GPIO_PUPDR_PUPDR8 ((uint32_t)0x00030000)
+#define GPIO_PUPDR_PUPDR8_0 ((uint32_t)0x00010000)
+#define GPIO_PUPDR_PUPDR8_1 ((uint32_t)0x00020000)
+#define GPIO_PUPDR_PUPDR9 ((uint32_t)0x000C0000)
+#define GPIO_PUPDR_PUPDR9_0 ((uint32_t)0x00040000)
+#define GPIO_PUPDR_PUPDR9_1 ((uint32_t)0x00080000)
+#define GPIO_PUPDR_PUPDR10 ((uint32_t)0x00300000)
+#define GPIO_PUPDR_PUPDR10_0 ((uint32_t)0x00100000)
+#define GPIO_PUPDR_PUPDR10_1 ((uint32_t)0x00200000)
+#define GPIO_PUPDR_PUPDR11 ((uint32_t)0x00C00000)
+#define GPIO_PUPDR_PUPDR11_0 ((uint32_t)0x00400000)
+#define GPIO_PUPDR_PUPDR11_1 ((uint32_t)0x00800000)
+#define GPIO_PUPDR_PUPDR12 ((uint32_t)0x03000000)
+#define GPIO_PUPDR_PUPDR12_0 ((uint32_t)0x01000000)
+#define GPIO_PUPDR_PUPDR12_1 ((uint32_t)0x02000000)
+#define GPIO_PUPDR_PUPDR13 ((uint32_t)0x0C000000)
+#define GPIO_PUPDR_PUPDR13_0 ((uint32_t)0x04000000)
+#define GPIO_PUPDR_PUPDR13_1 ((uint32_t)0x08000000)
+#define GPIO_PUPDR_PUPDR14 ((uint32_t)0x30000000)
+#define GPIO_PUPDR_PUPDR14_0 ((uint32_t)0x10000000)
+#define GPIO_PUPDR_PUPDR14_1 ((uint32_t)0x20000000)
+#define GPIO_PUPDR_PUPDR15 ((uint32_t)0xC0000000)
+#define GPIO_PUPDR_PUPDR15_0 ((uint32_t)0x40000000)
+#define GPIO_PUPDR_PUPDR15_1 ((uint32_t)0x80000000)
+
+/******************* Bit definition for GPIO_IDR register *******************/
+#define GPIO_IDR_0 ((uint32_t)0x00000001)
+#define GPIO_IDR_1 ((uint32_t)0x00000002)
+#define GPIO_IDR_2 ((uint32_t)0x00000004)
+#define GPIO_IDR_3 ((uint32_t)0x00000008)
+#define GPIO_IDR_4 ((uint32_t)0x00000010)
+#define GPIO_IDR_5 ((uint32_t)0x00000020)
+#define GPIO_IDR_6 ((uint32_t)0x00000040)
+#define GPIO_IDR_7 ((uint32_t)0x00000080)
+#define GPIO_IDR_8 ((uint32_t)0x00000100)
+#define GPIO_IDR_9 ((uint32_t)0x00000200)
+#define GPIO_IDR_10 ((uint32_t)0x00000400)
+#define GPIO_IDR_11 ((uint32_t)0x00000800)
+#define GPIO_IDR_12 ((uint32_t)0x00001000)
+#define GPIO_IDR_13 ((uint32_t)0x00002000)
+#define GPIO_IDR_14 ((uint32_t)0x00004000)
+#define GPIO_IDR_15 ((uint32_t)0x00008000)
+
+/****************** Bit definition for GPIO_ODR register ********************/
+#define GPIO_ODR_0 ((uint32_t)0x00000001)
+#define GPIO_ODR_1 ((uint32_t)0x00000002)
+#define GPIO_ODR_2 ((uint32_t)0x00000004)
+#define GPIO_ODR_3 ((uint32_t)0x00000008)
+#define GPIO_ODR_4 ((uint32_t)0x00000010)
+#define GPIO_ODR_5 ((uint32_t)0x00000020)
+#define GPIO_ODR_6 ((uint32_t)0x00000040)
+#define GPIO_ODR_7 ((uint32_t)0x00000080)
+#define GPIO_ODR_8 ((uint32_t)0x00000100)
+#define GPIO_ODR_9 ((uint32_t)0x00000200)
+#define GPIO_ODR_10 ((uint32_t)0x00000400)
+#define GPIO_ODR_11 ((uint32_t)0x00000800)
+#define GPIO_ODR_12 ((uint32_t)0x00001000)
+#define GPIO_ODR_13 ((uint32_t)0x00002000)
+#define GPIO_ODR_14 ((uint32_t)0x00004000)
+#define GPIO_ODR_15 ((uint32_t)0x00008000)
+
+/****************** Bit definition for GPIO_BSRR register ********************/
+#define GPIO_BSRR_BS_0 ((uint32_t)0x00000001)
+#define GPIO_BSRR_BS_1 ((uint32_t)0x00000002)
+#define GPIO_BSRR_BS_2 ((uint32_t)0x00000004)
+#define GPIO_BSRR_BS_3 ((uint32_t)0x00000008)
+#define GPIO_BSRR_BS_4 ((uint32_t)0x00000010)
+#define GPIO_BSRR_BS_5 ((uint32_t)0x00000020)
+#define GPIO_BSRR_BS_6 ((uint32_t)0x00000040)
+#define GPIO_BSRR_BS_7 ((uint32_t)0x00000080)
+#define GPIO_BSRR_BS_8 ((uint32_t)0x00000100)
+#define GPIO_BSRR_BS_9 ((uint32_t)0x00000200)
+#define GPIO_BSRR_BS_10 ((uint32_t)0x00000400)
+#define GPIO_BSRR_BS_11 ((uint32_t)0x00000800)
+#define GPIO_BSRR_BS_12 ((uint32_t)0x00001000)
+#define GPIO_BSRR_BS_13 ((uint32_t)0x00002000)
+#define GPIO_BSRR_BS_14 ((uint32_t)0x00004000)
+#define GPIO_BSRR_BS_15 ((uint32_t)0x00008000)
+#define GPIO_BSRR_BR_0 ((uint32_t)0x00010000)
+#define GPIO_BSRR_BR_1 ((uint32_t)0x00020000)
+#define GPIO_BSRR_BR_2 ((uint32_t)0x00040000)
+#define GPIO_BSRR_BR_3 ((uint32_t)0x00080000)
+#define GPIO_BSRR_BR_4 ((uint32_t)0x00100000)
+#define GPIO_BSRR_BR_5 ((uint32_t)0x00200000)
+#define GPIO_BSRR_BR_6 ((uint32_t)0x00400000)
+#define GPIO_BSRR_BR_7 ((uint32_t)0x00800000)
+#define GPIO_BSRR_BR_8 ((uint32_t)0x01000000)
+#define GPIO_BSRR_BR_9 ((uint32_t)0x02000000)
+#define GPIO_BSRR_BR_10 ((uint32_t)0x04000000)
+#define GPIO_BSRR_BR_11 ((uint32_t)0x08000000)
+#define GPIO_BSRR_BR_12 ((uint32_t)0x10000000)
+#define GPIO_BSRR_BR_13 ((uint32_t)0x20000000)
+#define GPIO_BSRR_BR_14 ((uint32_t)0x40000000)
+#define GPIO_BSRR_BR_15 ((uint32_t)0x80000000)
+
+/****************** Bit definition for GPIO_LCKR register ********************/
+#define GPIO_LCKR_LCK0 ((uint32_t)0x00000001)
+#define GPIO_LCKR_LCK1 ((uint32_t)0x00000002)
+#define GPIO_LCKR_LCK2 ((uint32_t)0x00000004)
+#define GPIO_LCKR_LCK3 ((uint32_t)0x00000008)
+#define GPIO_LCKR_LCK4 ((uint32_t)0x00000010)
+#define GPIO_LCKR_LCK5 ((uint32_t)0x00000020)
+#define GPIO_LCKR_LCK6 ((uint32_t)0x00000040)
+#define GPIO_LCKR_LCK7 ((uint32_t)0x00000080)
+#define GPIO_LCKR_LCK8 ((uint32_t)0x00000100)
+#define GPIO_LCKR_LCK9 ((uint32_t)0x00000200)
+#define GPIO_LCKR_LCK10 ((uint32_t)0x00000400)
+#define GPIO_LCKR_LCK11 ((uint32_t)0x00000800)
+#define GPIO_LCKR_LCK12 ((uint32_t)0x00001000)
+#define GPIO_LCKR_LCK13 ((uint32_t)0x00002000)
+#define GPIO_LCKR_LCK14 ((uint32_t)0x00004000)
+#define GPIO_LCKR_LCK15 ((uint32_t)0x00008000)
+#define GPIO_LCKR_LCKK ((uint32_t)0x00010000)
+
+/****************** Bit definition for GPIO_AFRL register ********************/
+#define GPIO_AFRL_AFRL0 ((uint32_t)0x0000000F)
+#define GPIO_AFRL_AFRL1 ((uint32_t)0x000000F0)
+#define GPIO_AFRL_AFRL2 ((uint32_t)0x00000F00)
+#define GPIO_AFRL_AFRL3 ((uint32_t)0x0000F000)
+#define GPIO_AFRL_AFRL4 ((uint32_t)0x000F0000)
+#define GPIO_AFRL_AFRL5 ((uint32_t)0x00F00000)
+#define GPIO_AFRL_AFRL6 ((uint32_t)0x0F000000)
+#define GPIO_AFRL_AFRL7 ((uint32_t)0xF0000000)
+
+/****************** Bit definition for GPIO_AFRH register ********************/
+#define GPIO_AFRH_AFRH0 ((uint32_t)0x0000000F)
+#define GPIO_AFRH_AFRH1 ((uint32_t)0x000000F0)
+#define GPIO_AFRH_AFRH2 ((uint32_t)0x00000F00)
+#define GPIO_AFRH_AFRH3 ((uint32_t)0x0000F000)
+#define GPIO_AFRH_AFRH4 ((uint32_t)0x000F0000)
+#define GPIO_AFRH_AFRH5 ((uint32_t)0x00F00000)
+#define GPIO_AFRH_AFRH6 ((uint32_t)0x0F000000)
+#define GPIO_AFRH_AFRH7 ((uint32_t)0xF0000000)
+
+/****************** Bit definition for GPIO_BRR register *********************/
+#define GPIO_BRR_BR_0 ((uint32_t)0x00000001)
+#define GPIO_BRR_BR_1 ((uint32_t)0x00000002)
+#define GPIO_BRR_BR_2 ((uint32_t)0x00000004)
+#define GPIO_BRR_BR_3 ((uint32_t)0x00000008)
+#define GPIO_BRR_BR_4 ((uint32_t)0x00000010)
+#define GPIO_BRR_BR_5 ((uint32_t)0x00000020)
+#define GPIO_BRR_BR_6 ((uint32_t)0x00000040)
+#define GPIO_BRR_BR_7 ((uint32_t)0x00000080)
+#define GPIO_BRR_BR_8 ((uint32_t)0x00000100)
+#define GPIO_BRR_BR_9 ((uint32_t)0x00000200)
+#define GPIO_BRR_BR_10 ((uint32_t)0x00000400)
+#define GPIO_BRR_BR_11 ((uint32_t)0x00000800)
+#define GPIO_BRR_BR_12 ((uint32_t)0x00001000)
+#define GPIO_BRR_BR_13 ((uint32_t)0x00002000)
+#define GPIO_BRR_BR_14 ((uint32_t)0x00004000)
+#define GPIO_BRR_BR_15 ((uint32_t)0x00008000)
+
+/******************************************************************************/
+/* */
+/* Inter-integrated Circuit Interface (I2C) */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for I2C_CR1 register *******************/
+#define I2C_CR1_PE ((uint32_t)0x00000001) /*!< Peripheral enable */
+#define I2C_CR1_TXIE ((uint32_t)0x00000002) /*!< TX interrupt enable */
+#define I2C_CR1_RXIE ((uint32_t)0x00000004) /*!< RX interrupt enable */
+#define I2C_CR1_ADDRIE ((uint32_t)0x00000008) /*!< Address match interrupt enable */
+#define I2C_CR1_NACKIE ((uint32_t)0x00000010) /*!< NACK received interrupt enable */
+#define I2C_CR1_STOPIE ((uint32_t)0x00000020) /*!< STOP detection interrupt enable */
+#define I2C_CR1_TCIE ((uint32_t)0x00000040) /*!< Transfer complete interrupt enable */
+#define I2C_CR1_ERRIE ((uint32_t)0x00000080) /*!< Errors interrupt enable */
+#define I2C_CR1_DFN ((uint32_t)0x00000F00) /*!< Digital noise filter */
+#define I2C_CR1_ANFOFF ((uint32_t)0x00001000) /*!< Analog noise filter OFF */
+#define I2C_CR1_SWRST ((uint32_t)0x00002000) /*!< Software reset */
+#define I2C_CR1_TXDMAEN ((uint32_t)0x00004000) /*!< DMA transmission requests enable */
+#define I2C_CR1_RXDMAEN ((uint32_t)0x00008000) /*!< DMA reception requests enable */
+#define I2C_CR1_SBC ((uint32_t)0x00010000) /*!< Slave byte control */
+#define I2C_CR1_NOSTRETCH ((uint32_t)0x00020000) /*!< Clock stretching disable */
+#define I2C_CR1_WUPEN ((uint32_t)0x00040000) /*!< Wakeup from STOP enable */
+#define I2C_CR1_GCEN ((uint32_t)0x00080000) /*!< General call enable */
+#define I2C_CR1_SMBHEN ((uint32_t)0x00100000) /*!< SMBus host address enable */
+#define I2C_CR1_SMBDEN ((uint32_t)0x00200000) /*!< SMBus device default address enable */
+#define I2C_CR1_ALERTEN ((uint32_t)0x00400000) /*!< SMBus alert enable */
+#define I2C_CR1_PECEN ((uint32_t)0x00800000) /*!< PEC enable */
+
+/****************** Bit definition for I2C_CR2 register ********************/
+#define I2C_CR2_SADD ((uint32_t)0x000003FF) /*!< Slave address (master mode) */
+#define I2C_CR2_RD_WRN ((uint32_t)0x00000400) /*!< Transfer direction (master mode) */
+#define I2C_CR2_ADD10 ((uint32_t)0x00000800) /*!< 10-bit addressing mode (master mode) */
+#define I2C_CR2_HEAD10R ((uint32_t)0x00001000) /*!< 10-bit address header only read direction (master mode) */
+#define I2C_CR2_START ((uint32_t)0x00002000) /*!< START generation */
+#define I2C_CR2_STOP ((uint32_t)0x00004000) /*!< STOP generation (master mode) */
+#define I2C_CR2_NACK ((uint32_t)0x00008000) /*!< NACK generation (slave mode) */
+#define I2C_CR2_NBYTES ((uint32_t)0x00FF0000) /*!< Number of bytes */
+#define I2C_CR2_RELOAD ((uint32_t)0x01000000) /*!< NBYTES reload mode */
+#define I2C_CR2_AUTOEND ((uint32_t)0x02000000) /*!< Automatic end mode (master mode) */
+#define I2C_CR2_PECBYTE ((uint32_t)0x04000000) /*!< Packet error checking byte */
+
+/******************* Bit definition for I2C_OAR1 register ******************/
+#define I2C_OAR1_OA1 ((uint32_t)0x000003FF) /*!< Interface own address 1 */
+#define I2C_OAR1_OA1MODE ((uint32_t)0x00000400) /*!< Own address 1 10-bit mode */
+#define I2C_OAR1_OA1EN ((uint32_t)0x00008000) /*!< Own address 1 enable */
+
+/******************* Bit definition for I2C_OAR2 register ******************/
+#define I2C_OAR2_OA2 ((uint32_t)0x000000FE) /*!< Interface own address 2 */
+#define I2C_OAR2_OA2MSK ((uint32_t)0x00000700) /*!< Own address 2 masks */
+#define I2C_OAR2_OA2EN ((uint32_t)0x00008000) /*!< Own address 2 enable */
+
+/******************* Bit definition for I2C_TIMINGR register ****************/
+#define I2C_TIMINGR_SCLL ((uint32_t)0x000000FF) /*!< SCL low period (master mode) */
+#define I2C_TIMINGR_SCLH ((uint32_t)0x0000FF00) /*!< SCL high period (master mode) */
+#define I2C_TIMINGR_SDADEL ((uint32_t)0x000F0000) /*!< Data hold time */
+#define I2C_TIMINGR_SCLDEL ((uint32_t)0x00F00000) /*!< Data setup time */
+#define I2C_TIMINGR_PRESC ((uint32_t)0xF0000000) /*!< Timings prescaler */
+
+/******************* Bit definition for I2C_TIMEOUTR register ****************/
+#define I2C_TIMEOUTR_TIMEOUTA ((uint32_t)0x00000FFF) /*!< Bus timeout A */
+#define I2C_TIMEOUTR_TIDLE ((uint32_t)0x00001000) /*!< Idle clock timeout detection */
+#define I2C_TIMEOUTR_TIMOUTEN ((uint32_t)0x00008000) /*!< Clock timeout enable */
+#define I2C_TIMEOUTR_TIMEOUTB ((uint32_t)0x0FFF0000) /*!< Bus timeout B*/
+#define I2C_TIMEOUTR_TEXTEN ((uint32_t)0x80000000) /*!< Extended clock timeout enable */
+
+/****************** Bit definition for I2C_ISR register ********************/
+#define I2C_ISR_TXE ((uint32_t)0x00000001) /*!< Transmit data register empty */
+#define I2C_ISR_TXIS ((uint32_t)0x00000002) /*!< Transmit interrupt status */
+#define I2C_ISR_RXNE ((uint32_t)0x00000004) /*!< Receive data register not empty */
+#define I2C_ISR_ADDR ((uint32_t)0x00000008) /*!< Address matched (slave mode)*/
+#define I2C_ISR_NACKF ((uint32_t)0x00000010) /*!< NACK received flag */
+#define I2C_ISR_STOPF ((uint32_t)0x00000020) /*!< STOP detection flag */
+#define I2C_ISR_TC ((uint32_t)0x00000040) /*!< Transfer complete (master mode) */
+#define I2C_ISR_TCR ((uint32_t)0x00000080) /*!< Transfer complete reload */
+#define I2C_ISR_BERR ((uint32_t)0x00000100) /*!< Bus error */
+#define I2C_ISR_ARLO ((uint32_t)0x00000200) /*!< Arbitration lost */
+#define I2C_ISR_OVR ((uint32_t)0x00000400) /*!< Overrun/Underrun */
+#define I2C_ISR_PECERR ((uint32_t)0x00000800) /*!< PEC error in reception */
+#define I2C_ISR_TIMEOUT ((uint32_t)0x00001000) /*!< Timeout or Tlow detection flag */
+#define I2C_ISR_ALERT ((uint32_t)0x00002000) /*!< SMBus alert */
+#define I2C_ISR_BUSY ((uint32_t)0x00008000) /*!< Bus busy */
+#define I2C_ISR_DIR ((uint32_t)0x00010000) /*!< Transfer direction (slave mode) */
+#define I2C_ISR_ADDCODE ((uint32_t)0x00FE0000) /*!< Address match code (slave mode) */
+
+/****************** Bit definition for I2C_ICR register ********************/
+#define I2C_ICR_ADDRCF ((uint32_t)0x00000008) /*!< Address matched clear flag */
+#define I2C_ICR_NACKCF ((uint32_t)0x00000010) /*!< NACK clear flag */
+#define I2C_ICR_STOPCF ((uint32_t)0x00000020) /*!< STOP detection clear flag */
+#define I2C_ICR_BERRCF ((uint32_t)0x00000100) /*!< Bus error clear flag */
+#define I2C_ICR_ARLOCF ((uint32_t)0x00000200) /*!< Arbitration lost clear flag */
+#define I2C_ICR_OVRCF ((uint32_t)0x00000400) /*!< Overrun/Underrun clear flag */
+#define I2C_ICR_PECCF ((uint32_t)0x00000800) /*!< PAC error clear flag */
+#define I2C_ICR_TIMOUTCF ((uint32_t)0x00001000) /*!< Timeout clear flag */
+#define I2C_ICR_ALERTCF ((uint32_t)0x00002000) /*!< Alert clear flag */
+
+/****************** Bit definition for I2C_PECR register *******************/
+#define I2C_PECR_PEC ((uint32_t)0x000000FF) /*!< PEC register */
+
+/****************** Bit definition for I2C_RXDR register *********************/
+#define I2C_RXDR_RXDATA ((uint32_t)0x000000FF) /*!< 8-bit receive data */
+
+/****************** Bit definition for I2C_TXDR register *******************/
+#define I2C_TXDR_TXDATA ((uint32_t)0x000000FF) /*!< 8-bit transmit data */
+
+/*****************************************************************************/
+/* */
+/* Independent WATCHDOG (IWDG) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for IWDG_KR register *******************/
+#define IWDG_KR_KEY ((uint32_t)0xFFFF) /*!< Key value (write only, read 0000h) */
+
+/******************* Bit definition for IWDG_PR register *******************/
+#define IWDG_PR_PR ((uint32_t)0x07) /*!< PR[2:0] (Prescaler divider) */
+#define IWDG_PR_PR_0 ((uint32_t)0x01) /*!< Bit 0 */
+#define IWDG_PR_PR_1 ((uint32_t)0x02) /*!< Bit 1 */
+#define IWDG_PR_PR_2 ((uint32_t)0x04) /*!< Bit 2 */
+
+/******************* Bit definition for IWDG_RLR register ******************/
+#define IWDG_RLR_RL ((uint32_t)0x0FFF) /*!< Watchdog counter reload value */
+
+/******************* Bit definition for IWDG_SR register *******************/
+#define IWDG_SR_PVU ((uint32_t)0x01) /*!< Watchdog prescaler value update */
+#define IWDG_SR_RVU ((uint32_t)0x02) /*!< Watchdog counter reload value update */
+#define IWDG_SR_WVU ((uint32_t)0x04) /*!< Watchdog counter window value update */
+
+/******************* Bit definition for IWDG_KR register *******************/
+#define IWDG_WINR_WIN ((uint32_t)0x0FFF) /*!< Watchdog counter window value */
+
+/*****************************************************************************/
+/* */
+/* Power Control (PWR) */
+/* */
+/*****************************************************************************/
+
+/******************** Bit definition for PWR_CR register *******************/
+#define PWR_CR_LPDS ((uint32_t)0x00000001) /*!< Low-power Deepsleep */
+#define PWR_CR_PDDS ((uint32_t)0x00000002) /*!< Power Down Deepsleep */
+#define PWR_CR_CWUF ((uint32_t)0x00000004) /*!< Clear Wakeup Flag */
+#define PWR_CR_CSBF ((uint32_t)0x00000008) /*!< Clear Standby Flag */
+#define PWR_CR_DBP ((uint32_t)0x00000100) /*!< Disable Backup Domain write protection */
+
+/******************* Bit definition for PWR_CSR register *******************/
+#define PWR_CSR_WUF ((uint32_t)0x00000001) /*!< Wakeup Flag */
+#define PWR_CSR_SBF ((uint32_t)0x00000002) /*!< Standby Flag */
+#define PWR_CSR_VREFINTRDYF ((uint32_t)0x00000008) /*!< Internal voltage reference (VREFINT) ready flag */
+
+#define PWR_CSR_EWUP1 ((uint32_t)0x00000100) /*!< Enable WKUP pin 1 */
+#define PWR_CSR_EWUP2 ((uint32_t)0x00000200) /*!< Enable WKUP pin 2 */
+
+/*****************************************************************************/
+/* */
+/* Reset and Clock Control */
+/* */
+/*****************************************************************************/
+
+/******************** Bit definition for RCC_CR register *******************/
+#define RCC_CR_HSION ((uint32_t)0x00000001) /*!< Internal High Speed clock enable */
+#define RCC_CR_HSIRDY ((uint32_t)0x00000002) /*!< Internal High Speed clock ready flag */
+
+#define RCC_CR_HSITRIM ((uint32_t)0x000000F8) /*!< Internal High Speed clock trimming */
+#define RCC_CR_HSITRIM_0 ((uint32_t)0x00000008) /*!<Bit 0 */
+#define RCC_CR_HSITRIM_1 ((uint32_t)0x00000010) /*!<Bit 1 */
+#define RCC_CR_HSITRIM_2 ((uint32_t)0x00000020) /*!<Bit 2 */
+#define RCC_CR_HSITRIM_3 ((uint32_t)0x00000040) /*!<Bit 3 */
+#define RCC_CR_HSITRIM_4 ((uint32_t)0x00000080) /*!<Bit 4 */
+
+#define RCC_CR_HSICAL ((uint32_t)0x0000FF00) /*!< Internal High Speed clock Calibration */
+#define RCC_CR_HSICAL_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define RCC_CR_HSICAL_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define RCC_CR_HSICAL_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define RCC_CR_HSICAL_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define RCC_CR_HSICAL_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+#define RCC_CR_HSICAL_5 ((uint32_t)0x00002000) /*!<Bit 5 */
+#define RCC_CR_HSICAL_6 ((uint32_t)0x00004000) /*!<Bit 6 */
+#define RCC_CR_HSICAL_7 ((uint32_t)0x00008000) /*!<Bit 7 */
+
+#define RCC_CR_HSEON ((uint32_t)0x00010000) /*!< External High Speed clock enable */
+#define RCC_CR_HSERDY ((uint32_t)0x00020000) /*!< External High Speed clock ready flag */
+#define RCC_CR_HSEBYP ((uint32_t)0x00040000) /*!< External High Speed clock Bypass */
+#define RCC_CR_CSSON ((uint32_t)0x00080000) /*!< Clock Security System enable */
+#define RCC_CR_PLLON ((uint32_t)0x01000000) /*!< PLL enable */
+#define RCC_CR_PLLRDY ((uint32_t)0x02000000) /*!< PLL clock ready flag */
+
+/******************** Bit definition for RCC_CFGR register *****************/
+/*!< SW configuration */
+#define RCC_CFGR_SW ((uint32_t)0x00000003) /*!< SW[1:0] bits (System clock Switch) */
+#define RCC_CFGR_SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR_SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+#define RCC_CFGR_SW_HSI ((uint32_t)0x00000000) /*!< HSI selected as system clock */
+#define RCC_CFGR_SW_HSE ((uint32_t)0x00000001) /*!< HSE selected as system clock */
+#define RCC_CFGR_SW_PLL ((uint32_t)0x00000002) /*!< PLL selected as system clock */
+
+/*!< SWS configuration */
+#define RCC_CFGR_SWS ((uint32_t)0x0000000C) /*!< SWS[1:0] bits (System Clock Switch Status) */
+#define RCC_CFGR_SWS_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define RCC_CFGR_SWS_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+
+#define RCC_CFGR_SWS_HSI ((uint32_t)0x00000000) /*!< HSI oscillator used as system clock */
+#define RCC_CFGR_SWS_HSE ((uint32_t)0x00000004) /*!< HSE oscillator used as system clock */
+#define RCC_CFGR_SWS_PLL ((uint32_t)0x00000008) /*!< PLL used as system clock */
+
+/*!< HPRE configuration */
+#define RCC_CFGR_HPRE ((uint32_t)0x000000F0) /*!< HPRE[3:0] bits (AHB prescaler) */
+#define RCC_CFGR_HPRE_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define RCC_CFGR_HPRE_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define RCC_CFGR_HPRE_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+#define RCC_CFGR_HPRE_3 ((uint32_t)0x00000080) /*!< Bit 3 */
+
+#define RCC_CFGR_HPRE_DIV1 ((uint32_t)0x00000000) /*!< SYSCLK not divided */
+#define RCC_CFGR_HPRE_DIV2 ((uint32_t)0x00000080) /*!< SYSCLK divided by 2 */
+#define RCC_CFGR_HPRE_DIV4 ((uint32_t)0x00000090) /*!< SYSCLK divided by 4 */
+#define RCC_CFGR_HPRE_DIV8 ((uint32_t)0x000000A0) /*!< SYSCLK divided by 8 */
+#define RCC_CFGR_HPRE_DIV16 ((uint32_t)0x000000B0) /*!< SYSCLK divided by 16 */
+#define RCC_CFGR_HPRE_DIV64 ((uint32_t)0x000000C0) /*!< SYSCLK divided by 64 */
+#define RCC_CFGR_HPRE_DIV128 ((uint32_t)0x000000D0) /*!< SYSCLK divided by 128 */
+#define RCC_CFGR_HPRE_DIV256 ((uint32_t)0x000000E0) /*!< SYSCLK divided by 256 */
+#define RCC_CFGR_HPRE_DIV512 ((uint32_t)0x000000F0) /*!< SYSCLK divided by 512 */
+
+/*!< PPRE configuration */
+#define RCC_CFGR_PPRE ((uint32_t)0x00000700) /*!< PRE[2:0] bits (APB prescaler) */
+#define RCC_CFGR_PPRE_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define RCC_CFGR_PPRE_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define RCC_CFGR_PPRE_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+
+#define RCC_CFGR_PPRE_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */
+#define RCC_CFGR_PPRE_DIV2 ((uint32_t)0x00000400) /*!< HCLK divided by 2 */
+#define RCC_CFGR_PPRE_DIV4 ((uint32_t)0x00000500) /*!< HCLK divided by 4 */
+#define RCC_CFGR_PPRE_DIV8 ((uint32_t)0x00000600) /*!< HCLK divided by 8 */
+#define RCC_CFGR_PPRE_DIV16 ((uint32_t)0x00000700) /*!< HCLK divided by 16 */
+
+/*!< ADCPPRE configuration */
+#define RCC_CFGR_ADCPRE ((uint32_t)0x00004000) /*!< ADCPRE bit (ADC prescaler) */
+
+#define RCC_CFGR_ADCPRE_DIV2 ((uint32_t)0x00000000) /*!< PCLK divided by 2 */
+#define RCC_CFGR_ADCPRE_DIV4 ((uint32_t)0x00004000) /*!< PCLK divided by 4 */
+
+#define RCC_CFGR_PLLSRC ((uint32_t)0x00010000) /*!< PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSI_DIV2 ((uint32_t)0x00000000) /*!< HSI clock divided by 2 selected as PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSE_PREDIV ((uint32_t)0x00010000) /*!< HSE/PREDIV clock selected as PLL entry clock source */
+
+#define RCC_CFGR_PLLXTPRE ((uint32_t)0x00020000) /*!< HSE divider for PLL entry */
+#define RCC_CFGR_PLLXTPRE_HSE_PREDIV_DIV1 ((uint32_t)0x00000000) /*!< HSE/PREDIV clock not divided for PLL entry */
+#define RCC_CFGR_PLLXTPRE_HSE_PREDIV_DIV2 ((uint32_t)0x00020000) /*!< HSE/PREDIV clock divided by 2 for PLL entry */
+
+/*!< PLLMUL configuration */
+#define RCC_CFGR_PLLMUL ((uint32_t)0x003C0000) /*!< PLLMUL[3:0] bits (PLL multiplication factor) */
+#define RCC_CFGR_PLLMUL_0 ((uint32_t)0x00040000) /*!< Bit 0 */
+#define RCC_CFGR_PLLMUL_1 ((uint32_t)0x00080000) /*!< Bit 1 */
+#define RCC_CFGR_PLLMUL_2 ((uint32_t)0x00100000) /*!< Bit 2 */
+#define RCC_CFGR_PLLMUL_3 ((uint32_t)0x00200000) /*!< Bit 3 */
+
+#define RCC_CFGR_PLLMUL2 ((uint32_t)0x00000000) /*!< PLL input clock*2 */
+#define RCC_CFGR_PLLMUL3 ((uint32_t)0x00040000) /*!< PLL input clock*3 */
+#define RCC_CFGR_PLLMUL4 ((uint32_t)0x00080000) /*!< PLL input clock*4 */
+#define RCC_CFGR_PLLMUL5 ((uint32_t)0x000C0000) /*!< PLL input clock*5 */
+#define RCC_CFGR_PLLMUL6 ((uint32_t)0x00100000) /*!< PLL input clock*6 */
+#define RCC_CFGR_PLLMUL7 ((uint32_t)0x00140000) /*!< PLL input clock*7 */
+#define RCC_CFGR_PLLMUL8 ((uint32_t)0x00180000) /*!< PLL input clock*8 */
+#define RCC_CFGR_PLLMUL9 ((uint32_t)0x001C0000) /*!< PLL input clock*9 */
+#define RCC_CFGR_PLLMUL10 ((uint32_t)0x00200000) /*!< PLL input clock10 */
+#define RCC_CFGR_PLLMUL11 ((uint32_t)0x00240000) /*!< PLL input clock*11 */
+#define RCC_CFGR_PLLMUL12 ((uint32_t)0x00280000) /*!< PLL input clock*12 */
+#define RCC_CFGR_PLLMUL13 ((uint32_t)0x002C0000) /*!< PLL input clock*13 */
+#define RCC_CFGR_PLLMUL14 ((uint32_t)0x00300000) /*!< PLL input clock*14 */
+#define RCC_CFGR_PLLMUL15 ((uint32_t)0x00340000) /*!< PLL input clock*15 */
+#define RCC_CFGR_PLLMUL16 ((uint32_t)0x00380000) /*!< PLL input clock*16 */
+
+/*!< MCO configuration */
+#define RCC_CFGR_MCO ((uint32_t)0x0F000000) /*!< MCO[3:0] bits (Microcontroller Clock Output) */
+#define RCC_CFGR_MCO_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define RCC_CFGR_MCO_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define RCC_CFGR_MCO_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+#define RCC_CFGR_MCO_3 ((uint32_t)0x08000000) /*!< Bit 3 */
+
+#define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
+#define RCC_CFGR_MCO_HSI14 ((uint32_t)0x01000000) /*!< HSI14 clock selected as MCO source */
+#define RCC_CFGR_MCO_LSI ((uint32_t)0x02000000) /*!< LSI clock selected as MCO source */
+#define RCC_CFGR_MCO_LSE ((uint32_t)0x03000000) /*!< LSE clock selected as MCO source */
+#define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x04000000) /*!< System clock selected as MCO source */
+#define RCC_CFGR_MCO_HSI ((uint32_t)0x05000000) /*!< HSI clock selected as MCO source */
+#define RCC_CFGR_MCO_HSE ((uint32_t)0x06000000) /*!< HSE clock selected as MCO source */
+#define RCC_CFGR_MCO_PLL ((uint32_t)0x07000000) /*!< PLL clock divided by 2 selected as MCO source */
+
+#define RCC_CFGR_MCOPRE ((uint32_t)0x70000000) /*!< MCO prescaler */
+#define RCC_CFGR_MCOPRE_DIV1 ((uint32_t)0x00000000) /*!< MCO is divided by 1 */
+#define RCC_CFGR_MCOPRE_DIV2 ((uint32_t)0x10000000) /*!< MCO is divided by 2 */
+#define RCC_CFGR_MCOPRE_DIV4 ((uint32_t)0x20000000) /*!< MCO is divided by 4 */
+#define RCC_CFGR_MCOPRE_DIV8 ((uint32_t)0x30000000) /*!< MCO is divided by 8 */
+#define RCC_CFGR_MCOPRE_DIV16 ((uint32_t)0x40000000) /*!< MCO is divided by 16 */
+#define RCC_CFGR_MCOPRE_DIV32 ((uint32_t)0x50000000) /*!< MCO is divided by 32 */
+#define RCC_CFGR_MCOPRE_DIV64 ((uint32_t)0x60000000) /*!< MCO is divided by 64 */
+#define RCC_CFGR_MCOPRE_DIV128 ((uint32_t)0x70000000) /*!< MCO is divided by 128 */
+
+#define RCC_CFGR_PLLNODIV ((uint32_t)0x80000000) /*!< PLL is not divided to MCO */
+
+/*!<****************** Bit definition for RCC_CIR register *****************/
+#define RCC_CIR_LSIRDYF ((uint32_t)0x00000001) /*!< LSI Ready Interrupt flag */
+#define RCC_CIR_LSERDYF ((uint32_t)0x00000002) /*!< LSE Ready Interrupt flag */
+#define RCC_CIR_HSIRDYF ((uint32_t)0x00000004) /*!< HSI Ready Interrupt flag */
+#define RCC_CIR_HSERDYF ((uint32_t)0x00000008) /*!< HSE Ready Interrupt flag */
+#define RCC_CIR_PLLRDYF ((uint32_t)0x00000010) /*!< PLL Ready Interrupt flag */
+#define RCC_CIR_HSI14RDYF ((uint32_t)0x00000020) /*!< HSI14 Ready Interrupt flag */
+#define RCC_CIR_CSSF ((uint32_t)0x00000080) /*!< Clock Security System Interrupt flag */
+#define RCC_CIR_LSIRDYIE ((uint32_t)0x00000100) /*!< LSI Ready Interrupt Enable */
+#define RCC_CIR_LSERDYIE ((uint32_t)0x00000200) /*!< LSE Ready Interrupt Enable */
+#define RCC_CIR_HSIRDYIE ((uint32_t)0x00000400) /*!< HSI Ready Interrupt Enable */
+#define RCC_CIR_HSERDYIE ((uint32_t)0x00000800) /*!< HSE Ready Interrupt Enable */
+#define RCC_CIR_PLLRDYIE ((uint32_t)0x00001000) /*!< PLL Ready Interrupt Enable */
+#define RCC_CIR_HSI14RDYIE ((uint32_t)0x00002000) /*!< HSI14 Ready Interrupt Enable */
+#define RCC_CIR_LSIRDYC ((uint32_t)0x00010000) /*!< LSI Ready Interrupt Clear */
+#define RCC_CIR_LSERDYC ((uint32_t)0x00020000) /*!< LSE Ready Interrupt Clear */
+#define RCC_CIR_HSIRDYC ((uint32_t)0x00040000) /*!< HSI Ready Interrupt Clear */
+#define RCC_CIR_HSERDYC ((uint32_t)0x00080000) /*!< HSE Ready Interrupt Clear */
+#define RCC_CIR_PLLRDYC ((uint32_t)0x00100000) /*!< PLL Ready Interrupt Clear */
+#define RCC_CIR_HSI14RDYC ((uint32_t)0x00200000) /*!< HSI14 Ready Interrupt Clear */
+#define RCC_CIR_CSSC ((uint32_t)0x00800000) /*!< Clock Security System Interrupt Clear */
+
+/***************** Bit definition for RCC_APB2RSTR register ****************/
+#define RCC_APB2RSTR_SYSCFGRST ((uint32_t)0x00000001) /*!< SYSCFG clock reset */
+#define RCC_APB2RSTR_ADCRST ((uint32_t)0x00000200) /*!< ADC clock reset */
+#define RCC_APB2RSTR_TIM1RST ((uint32_t)0x00000800) /*!< TIM1 clock reset */
+#define RCC_APB2RSTR_SPI1RST ((uint32_t)0x00001000) /*!< SPI1 clock reset */
+#define RCC_APB2RSTR_USART1RST ((uint32_t)0x00004000) /*!< USART1 clock reset */
+#define RCC_APB2RSTR_TIM16RST ((uint32_t)0x00020000) /*!< TIM16 clock reset */
+#define RCC_APB2RSTR_TIM17RST ((uint32_t)0x00040000) /*!< TIM17 clock reset */
+#define RCC_APB2RSTR_DBGMCURST ((uint32_t)0x00400000) /*!< DBGMCU clock reset */
+
+/*!< Old ADC1 clock reset bit definition maintained for legacy purpose */
+#define RCC_APB2RSTR_ADC1RST RCC_APB2RSTR_ADCRST
+
+/***************** Bit definition for RCC_APB1RSTR register ****************/
+#define RCC_APB1RSTR_TIM2RST ((uint32_t)0x00000001) /*!< Timer 2 clock reset */
+#define RCC_APB1RSTR_TIM3RST ((uint32_t)0x00000002) /*!< Timer 3 clock reset */
+#define RCC_APB1RSTR_TIM14RST ((uint32_t)0x00000100) /*!< Timer 14 clock reset */
+#define RCC_APB1RSTR_WWDGRST ((uint32_t)0x00000800) /*!< Window Watchdog clock reset */
+#define RCC_APB1RSTR_I2C1RST ((uint32_t)0x00200000) /*!< I2C 1 clock reset */
+#define RCC_APB1RSTR_PWRRST ((uint32_t)0x10000000) /*!< PWR clock reset */
+
+/****************** Bit definition for RCC_AHBENR register *****************/
+#define RCC_AHBENR_DMAEN ((uint32_t)0x00000001) /*!< DMA1 clock enable */
+#define RCC_AHBENR_SRAMEN ((uint32_t)0x00000004) /*!< SRAM interface clock enable */
+#define RCC_AHBENR_FLITFEN ((uint32_t)0x00000010) /*!< FLITF clock enable */
+#define RCC_AHBENR_CRCEN ((uint32_t)0x00000040) /*!< CRC clock enable */
+#define RCC_AHBENR_GPIOAEN ((uint32_t)0x00020000) /*!< GPIOA clock enable */
+#define RCC_AHBENR_GPIOBEN ((uint32_t)0x00040000) /*!< GPIOB clock enable */
+#define RCC_AHBENR_GPIOCEN ((uint32_t)0x00080000) /*!< GPIOC clock enable */
+#define RCC_AHBENR_GPIODEN ((uint32_t)0x00100000) /*!< GPIOD clock enable */
+#define RCC_AHBENR_GPIOFEN ((uint32_t)0x00400000) /*!< GPIOF clock enable */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_AHBENR_DMA1EN RCC_AHBENR_DMAEN /*!< DMA1 clock enable */
+#define RCC_AHBENR_TSEN RCC_AHBENR_TSCEN /*!< TS clock enable */
+
+/***************** Bit definition for RCC_APB2ENR register *****************/
+#define RCC_APB2ENR_SYSCFGCOMPEN ((uint32_t)0x00000001) /*!< SYSCFG and comparator clock enable */
+#define RCC_APB2ENR_ADCEN ((uint32_t)0x00000200) /*!< ADC1 clock enable */
+#define RCC_APB2ENR_TIM1EN ((uint32_t)0x00000800) /*!< TIM1 clock enable */
+#define RCC_APB2ENR_SPI1EN ((uint32_t)0x00001000) /*!< SPI1 clock enable */
+#define RCC_APB2ENR_USART1EN ((uint32_t)0x00004000) /*!< USART1 clock enable */
+#define RCC_APB2ENR_TIM16EN ((uint32_t)0x00020000) /*!< TIM16 clock enable */
+#define RCC_APB2ENR_TIM17EN ((uint32_t)0x00040000) /*!< TIM17 clock enable */
+#define RCC_APB2ENR_DBGMCUEN ((uint32_t)0x00400000) /*!< DBGMCU clock enable */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_APB2ENR_SYSCFGEN RCC_APB2ENR_SYSCFGCOMPEN /*!< SYSCFG clock enable */
+#define RCC_APB2ENR_ADC1EN RCC_APB2ENR_ADCEN /*!< ADC1 clock enable */
+
+/***************** Bit definition for RCC_APB1ENR register *****************/
+#define RCC_APB1ENR_TIM2EN ((uint32_t)0x00000001) /*!< Timer 2 clock enable */
+#define RCC_APB1ENR_TIM3EN ((uint32_t)0x00000002) /*!< Timer 3 clock enable */
+#define RCC_APB1ENR_TIM14EN ((uint32_t)0x00000100) /*!< Timer 14 clock enable */
+#define RCC_APB1ENR_WWDGEN ((uint32_t)0x00000800) /*!< Window Watchdog clock enable */
+#define RCC_APB1ENR_I2C1EN ((uint32_t)0x00200000) /*!< I2C1 clock enable */
+#define RCC_APB1ENR_PWREN ((uint32_t)0x10000000) /*!< PWR clock enable */
+
+/******************* Bit definition for RCC_BDCR register ******************/
+#define RCC_BDCR_LSEON ((uint32_t)0x00000001) /*!< External Low Speed oscillator enable */
+#define RCC_BDCR_LSERDY ((uint32_t)0x00000002) /*!< External Low Speed oscillator Ready */
+#define RCC_BDCR_LSEBYP ((uint32_t)0x00000004) /*!< External Low Speed oscillator Bypass */
+
+#define RCC_BDCR_LSEDRV ((uint32_t)0x00000018) /*!< LSEDRV[1:0] bits (LSE Osc. drive capability) */
+#define RCC_BDCR_LSEDRV_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define RCC_BDCR_LSEDRV_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+
+#define RCC_BDCR_RTCSEL ((uint32_t)0x00000300) /*!< RTCSEL[1:0] bits (RTC clock source selection) */
+#define RCC_BDCR_RTCSEL_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define RCC_BDCR_RTCSEL_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+
+/*!< RTC configuration */
+#define RCC_BDCR_RTCSEL_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
+#define RCC_BDCR_RTCSEL_LSE ((uint32_t)0x00000100) /*!< LSE oscillator clock used as RTC clock */
+#define RCC_BDCR_RTCSEL_LSI ((uint32_t)0x00000200) /*!< LSI oscillator clock used as RTC clock */
+#define RCC_BDCR_RTCSEL_HSE ((uint32_t)0x00000300) /*!< HSE oscillator clock divided by 128 used as RTC clock */
+
+#define RCC_BDCR_RTCEN ((uint32_t)0x00008000) /*!< RTC clock enable */
+#define RCC_BDCR_BDRST ((uint32_t)0x00010000) /*!< Backup domain software reset */
+
+/******************* Bit definition for RCC_CSR register *******************/
+#define RCC_CSR_LSION ((uint32_t)0x00000001) /*!< Internal Low Speed oscillator enable */
+#define RCC_CSR_LSIRDY ((uint32_t)0x00000002) /*!< Internal Low Speed oscillator Ready */
+#define RCC_CSR_V18PWRRSTF ((uint32_t)0x00800000) /*!< V1.8 power domain reset flag */
+#define RCC_CSR_RMVF ((uint32_t)0x01000000) /*!< Remove reset flag */
+#define RCC_CSR_OBLRSTF ((uint32_t)0x02000000) /*!< OBL reset flag */
+#define RCC_CSR_PINRSTF ((uint32_t)0x04000000) /*!< PIN reset flag */
+#define RCC_CSR_PORRSTF ((uint32_t)0x08000000) /*!< POR/PDR reset flag */
+#define RCC_CSR_SFTRSTF ((uint32_t)0x10000000) /*!< Software Reset flag */
+#define RCC_CSR_IWDGRSTF ((uint32_t)0x20000000) /*!< Independent Watchdog reset flag */
+#define RCC_CSR_WWDGRSTF ((uint32_t)0x40000000) /*!< Window watchdog reset flag */
+#define RCC_CSR_LPWRRSTF ((uint32_t)0x80000000) /*!< Low-Power reset flag */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_CSR_OBL RCC_CSR_OBLRSTF /*!< OBL reset flag */
+
+/******************* Bit definition for RCC_AHBRSTR register ***************/
+#define RCC_AHBRSTR_GPIOARST ((uint32_t)0x00020000) /*!< GPIOA clock reset */
+#define RCC_AHBRSTR_GPIOBRST ((uint32_t)0x00040000) /*!< GPIOB clock reset */
+#define RCC_AHBRSTR_GPIOCRST ((uint32_t)0x00080000) /*!< GPIOC clock reset */
+#define RCC_AHBRSTR_GPIODRST ((uint32_t)0x00100000) /*!< GPIOD clock reset */
+#define RCC_AHBRSTR_GPIOFRST ((uint32_t)0x00400000) /*!< GPIOF clock reset */
+
+/******************* Bit definition for RCC_CFGR2 register *****************/
+/*!< PREDIV configuration */
+#define RCC_CFGR2_PREDIV ((uint32_t)0x0000000F) /*!< PREDIV[3:0] bits */
+#define RCC_CFGR2_PREDIV_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR2_PREDIV_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define RCC_CFGR2_PREDIV_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define RCC_CFGR2_PREDIV_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+
+#define RCC_CFGR2_PREDIV_DIV1 ((uint32_t)0x00000000) /*!< PREDIV input clock not divided */
+#define RCC_CFGR2_PREDIV_DIV2 ((uint32_t)0x00000001) /*!< PREDIV input clock divided by 2 */
+#define RCC_CFGR2_PREDIV_DIV3 ((uint32_t)0x00000002) /*!< PREDIV input clock divided by 3 */
+#define RCC_CFGR2_PREDIV_DIV4 ((uint32_t)0x00000003) /*!< PREDIV input clock divided by 4 */
+#define RCC_CFGR2_PREDIV_DIV5 ((uint32_t)0x00000004) /*!< PREDIV input clock divided by 5 */
+#define RCC_CFGR2_PREDIV_DIV6 ((uint32_t)0x00000005) /*!< PREDIV input clock divided by 6 */
+#define RCC_CFGR2_PREDIV_DIV7 ((uint32_t)0x00000006) /*!< PREDIV input clock divided by 7 */
+#define RCC_CFGR2_PREDIV_DIV8 ((uint32_t)0x00000007) /*!< PREDIV input clock divided by 8 */
+#define RCC_CFGR2_PREDIV_DIV9 ((uint32_t)0x00000008) /*!< PREDIV input clock divided by 9 */
+#define RCC_CFGR2_PREDIV_DIV10 ((uint32_t)0x00000009) /*!< PREDIV input clock divided by 10 */
+#define RCC_CFGR2_PREDIV_DIV11 ((uint32_t)0x0000000A) /*!< PREDIV input clock divided by 11 */
+#define RCC_CFGR2_PREDIV_DIV12 ((uint32_t)0x0000000B) /*!< PREDIV input clock divided by 12 */
+#define RCC_CFGR2_PREDIV_DIV13 ((uint32_t)0x0000000C) /*!< PREDIV input clock divided by 13 */
+#define RCC_CFGR2_PREDIV_DIV14 ((uint32_t)0x0000000D) /*!< PREDIV input clock divided by 14 */
+#define RCC_CFGR2_PREDIV_DIV15 ((uint32_t)0x0000000E) /*!< PREDIV input clock divided by 15 */
+#define RCC_CFGR2_PREDIV_DIV16 ((uint32_t)0x0000000F) /*!< PREDIV input clock divided by 16 */
+
+/******************* Bit definition for RCC_CFGR3 register *****************/
+/*!< USART1 Clock source selection */
+#define RCC_CFGR3_USART1SW ((uint32_t)0x00000003) /*!< USART1SW[1:0] bits */
+#define RCC_CFGR3_USART1SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR3_USART1SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+#define RCC_CFGR3_USART1SW_PCLK ((uint32_t)0x00000000) /*!< PCLK clock used as USART1 clock source */
+#define RCC_CFGR3_USART1SW_SYSCLK ((uint32_t)0x00000001) /*!< System clock selected as USART1 clock source */
+#define RCC_CFGR3_USART1SW_LSE ((uint32_t)0x00000002) /*!< LSE oscillator clock used as USART1 clock source */
+#define RCC_CFGR3_USART1SW_HSI ((uint32_t)0x00000003) /*!< HSI oscillator clock used as USART1 clock source */
+
+/*!< I2C1 Clock source selection */
+#define RCC_CFGR3_I2C1SW ((uint32_t)0x00000010) /*!< I2C1SW bits */
+
+#define RCC_CFGR3_I2C1SW_HSI ((uint32_t)0x00000000) /*!< HSI oscillator clock used as I2C1 clock source */
+#define RCC_CFGR3_I2C1SW_SYSCLK ((uint32_t)0x00000010) /*!< System clock selected as I2C1 clock source */
+
+/******************* Bit definition for RCC_CR2 register *******************/
+#define RCC_CR2_HSI14ON ((uint32_t)0x00000001) /*!< Internal High Speed 14MHz clock enable */
+#define RCC_CR2_HSI14RDY ((uint32_t)0x00000002) /*!< Internal High Speed 14MHz clock ready flag */
+#define RCC_CR2_HSI14DIS ((uint32_t)0x00000004) /*!< Internal High Speed 14MHz clock disable */
+#define RCC_CR2_HSI14TRIM ((uint32_t)0x000000F8) /*!< Internal High Speed 14MHz clock trimming */
+#define RCC_CR2_HSI14CAL ((uint32_t)0x0000FF00) /*!< Internal High Speed 14MHz clock Calibration */
+
+/*****************************************************************************/
+/* */
+/* Real-Time Clock (RTC) */
+/* */
+/*****************************************************************************/
+/******************** Bits definition for RTC_TR register ******************/
+#define RTC_TR_PM ((uint32_t)0x00400000)
+#define RTC_TR_HT ((uint32_t)0x00300000)
+#define RTC_TR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TR_HU ((uint32_t)0x000F0000)
+#define RTC_TR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TR_MNT ((uint32_t)0x00007000)
+#define RTC_TR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TR_MNU ((uint32_t)0x00000F00)
+#define RTC_TR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TR_ST ((uint32_t)0x00000070)
+#define RTC_TR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TR_SU ((uint32_t)0x0000000F)
+#define RTC_TR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_DR register ******************/
+#define RTC_DR_YT ((uint32_t)0x00F00000)
+#define RTC_DR_YT_0 ((uint32_t)0x00100000)
+#define RTC_DR_YT_1 ((uint32_t)0x00200000)
+#define RTC_DR_YT_2 ((uint32_t)0x00400000)
+#define RTC_DR_YT_3 ((uint32_t)0x00800000)
+#define RTC_DR_YU ((uint32_t)0x000F0000)
+#define RTC_DR_YU_0 ((uint32_t)0x00010000)
+#define RTC_DR_YU_1 ((uint32_t)0x00020000)
+#define RTC_DR_YU_2 ((uint32_t)0x00040000)
+#define RTC_DR_YU_3 ((uint32_t)0x00080000)
+#define RTC_DR_WDU ((uint32_t)0x0000E000)
+#define RTC_DR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_DR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_DR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_DR_MT ((uint32_t)0x00001000)
+#define RTC_DR_MU ((uint32_t)0x00000F00)
+#define RTC_DR_MU_0 ((uint32_t)0x00000100)
+#define RTC_DR_MU_1 ((uint32_t)0x00000200)
+#define RTC_DR_MU_2 ((uint32_t)0x00000400)
+#define RTC_DR_MU_3 ((uint32_t)0x00000800)
+#define RTC_DR_DT ((uint32_t)0x00000030)
+#define RTC_DR_DT_0 ((uint32_t)0x00000010)
+#define RTC_DR_DT_1 ((uint32_t)0x00000020)
+#define RTC_DR_DU ((uint32_t)0x0000000F)
+#define RTC_DR_DU_0 ((uint32_t)0x00000001)
+#define RTC_DR_DU_1 ((uint32_t)0x00000002)
+#define RTC_DR_DU_2 ((uint32_t)0x00000004)
+#define RTC_DR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_CR register ******************/
+#define RTC_CR_COE ((uint32_t)0x00800000)
+#define RTC_CR_OSEL ((uint32_t)0x00600000)
+#define RTC_CR_OSEL_0 ((uint32_t)0x00200000)
+#define RTC_CR_OSEL_1 ((uint32_t)0x00400000)
+#define RTC_CR_POL ((uint32_t)0x00100000)
+#define RTC_CR_COSEL ((uint32_t)0x00080000)
+#define RTC_CR_BCK ((uint32_t)0x00040000)
+#define RTC_CR_SUB1H ((uint32_t)0x00020000)
+#define RTC_CR_ADD1H ((uint32_t)0x00010000)
+#define RTC_CR_TSIE ((uint32_t)0x00008000)
+#define RTC_CR_ALRAIE ((uint32_t)0x00001000)
+#define RTC_CR_TSE ((uint32_t)0x00000800)
+#define RTC_CR_ALRAE ((uint32_t)0x00000100)
+#define RTC_CR_FMT ((uint32_t)0x00000040)
+#define RTC_CR_BYPSHAD ((uint32_t)0x00000020)
+#define RTC_CR_REFCKON ((uint32_t)0x00000010)
+#define RTC_CR_TSEDGE ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_ISR register *****************/
+#define RTC_ISR_RECALPF ((uint32_t)0x00010000)
+#define RTC_ISR_TAMP2F ((uint32_t)0x00004000)
+#define RTC_ISR_TAMP1F ((uint32_t)0x00002000)
+#define RTC_ISR_TSOVF ((uint32_t)0x00001000)
+#define RTC_ISR_TSF ((uint32_t)0x00000800)
+#define RTC_ISR_ALRAF ((uint32_t)0x00000100)
+#define RTC_ISR_INIT ((uint32_t)0x00000080)
+#define RTC_ISR_INITF ((uint32_t)0x00000040)
+#define RTC_ISR_RSF ((uint32_t)0x00000020)
+#define RTC_ISR_INITS ((uint32_t)0x00000010)
+#define RTC_ISR_SHPF ((uint32_t)0x00000008)
+#define RTC_ISR_ALRAWF ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_PRER register ****************/
+#define RTC_PRER_PREDIV_A ((uint32_t)0x007F0000)
+#define RTC_PRER_PREDIV_S ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_ALRMAR register **************/
+#define RTC_ALRMAR_MSK4 ((uint32_t)0x80000000)
+#define RTC_ALRMAR_WDSEL ((uint32_t)0x40000000)
+#define RTC_ALRMAR_DT ((uint32_t)0x30000000)
+#define RTC_ALRMAR_DT_0 ((uint32_t)0x10000000)
+#define RTC_ALRMAR_DT_1 ((uint32_t)0x20000000)
+#define RTC_ALRMAR_DU ((uint32_t)0x0F000000)
+#define RTC_ALRMAR_DU_0 ((uint32_t)0x01000000)
+#define RTC_ALRMAR_DU_1 ((uint32_t)0x02000000)
+#define RTC_ALRMAR_DU_2 ((uint32_t)0x04000000)
+#define RTC_ALRMAR_DU_3 ((uint32_t)0x08000000)
+#define RTC_ALRMAR_MSK3 ((uint32_t)0x00800000)
+#define RTC_ALRMAR_PM ((uint32_t)0x00400000)
+#define RTC_ALRMAR_HT ((uint32_t)0x00300000)
+#define RTC_ALRMAR_HT_0 ((uint32_t)0x00100000)
+#define RTC_ALRMAR_HT_1 ((uint32_t)0x00200000)
+#define RTC_ALRMAR_HU ((uint32_t)0x000F0000)
+#define RTC_ALRMAR_HU_0 ((uint32_t)0x00010000)
+#define RTC_ALRMAR_HU_1 ((uint32_t)0x00020000)
+#define RTC_ALRMAR_HU_2 ((uint32_t)0x00040000)
+#define RTC_ALRMAR_HU_3 ((uint32_t)0x00080000)
+#define RTC_ALRMAR_MSK2 ((uint32_t)0x00008000)
+#define RTC_ALRMAR_MNT ((uint32_t)0x00007000)
+#define RTC_ALRMAR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_ALRMAR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_ALRMAR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_ALRMAR_MNU ((uint32_t)0x00000F00)
+#define RTC_ALRMAR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_ALRMAR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_ALRMAR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_ALRMAR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_ALRMAR_MSK1 ((uint32_t)0x00000080)
+#define RTC_ALRMAR_ST ((uint32_t)0x00000070)
+#define RTC_ALRMAR_ST_0 ((uint32_t)0x00000010)
+#define RTC_ALRMAR_ST_1 ((uint32_t)0x00000020)
+#define RTC_ALRMAR_ST_2 ((uint32_t)0x00000040)
+#define RTC_ALRMAR_SU ((uint32_t)0x0000000F)
+#define RTC_ALRMAR_SU_0 ((uint32_t)0x00000001)
+#define RTC_ALRMAR_SU_1 ((uint32_t)0x00000002)
+#define RTC_ALRMAR_SU_2 ((uint32_t)0x00000004)
+#define RTC_ALRMAR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_WPR register *****************/
+#define RTC_WPR_KEY ((uint32_t)0x000000FF)
+
+/******************** Bits definition for RTC_SSR register *****************/
+#define RTC_SSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_SHIFTR register **************/
+#define RTC_SHIFTR_SUBFS ((uint32_t)0x00007FFF)
+#define RTC_SHIFTR_ADD1S ((uint32_t)0x80000000)
+
+/******************** Bits definition for RTC_TSTR register ****************/
+#define RTC_TSTR_PM ((uint32_t)0x00400000)
+#define RTC_TSTR_HT ((uint32_t)0x00300000)
+#define RTC_TSTR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TSTR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TSTR_HU ((uint32_t)0x000F0000)
+#define RTC_TSTR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TSTR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TSTR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TSTR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TSTR_MNT ((uint32_t)0x00007000)
+#define RTC_TSTR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TSTR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TSTR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TSTR_MNU ((uint32_t)0x00000F00)
+#define RTC_TSTR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TSTR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TSTR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TSTR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TSTR_ST ((uint32_t)0x00000070)
+#define RTC_TSTR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TSTR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TSTR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TSTR_SU ((uint32_t)0x0000000F)
+#define RTC_TSTR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TSTR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TSTR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TSTR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSDR register ****************/
+#define RTC_TSDR_WDU ((uint32_t)0x0000E000)
+#define RTC_TSDR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_TSDR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_TSDR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_TSDR_MT ((uint32_t)0x00001000)
+#define RTC_TSDR_MU ((uint32_t)0x00000F00)
+#define RTC_TSDR_MU_0 ((uint32_t)0x00000100)
+#define RTC_TSDR_MU_1 ((uint32_t)0x00000200)
+#define RTC_TSDR_MU_2 ((uint32_t)0x00000400)
+#define RTC_TSDR_MU_3 ((uint32_t)0x00000800)
+#define RTC_TSDR_DT ((uint32_t)0x00000030)
+#define RTC_TSDR_DT_0 ((uint32_t)0x00000010)
+#define RTC_TSDR_DT_1 ((uint32_t)0x00000020)
+#define RTC_TSDR_DU ((uint32_t)0x0000000F)
+#define RTC_TSDR_DU_0 ((uint32_t)0x00000001)
+#define RTC_TSDR_DU_1 ((uint32_t)0x00000002)
+#define RTC_TSDR_DU_2 ((uint32_t)0x00000004)
+#define RTC_TSDR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSSSR register ***************/
+#define RTC_TSSSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_CALR register ****************/
+#define RTC_CALR_CALP ((uint32_t)0x00008000)
+#define RTC_CALR_CALW8 ((uint32_t)0x00004000)
+#define RTC_CALR_CALW16 ((uint32_t)0x00002000)
+#define RTC_CALR_CALM ((uint32_t)0x000001FF)
+#define RTC_CALR_CALM_0 ((uint32_t)0x00000001)
+#define RTC_CALR_CALM_1 ((uint32_t)0x00000002)
+#define RTC_CALR_CALM_2 ((uint32_t)0x00000004)
+#define RTC_CALR_CALM_3 ((uint32_t)0x00000008)
+#define RTC_CALR_CALM_4 ((uint32_t)0x00000010)
+#define RTC_CALR_CALM_5 ((uint32_t)0x00000020)
+#define RTC_CALR_CALM_6 ((uint32_t)0x00000040)
+#define RTC_CALR_CALM_7 ((uint32_t)0x00000080)
+#define RTC_CALR_CALM_8 ((uint32_t)0x00000100)
+
+/******************** Bits definition for RTC_TAFCR register ***************/
+#define RTC_TAFCR_ALARMOUTTYPE ((uint32_t)0x00040000)
+#define RTC_TAFCR_TAMPPUDIS ((uint32_t)0x00008000)
+#define RTC_TAFCR_TAMPPRCH ((uint32_t)0x00006000)
+#define RTC_TAFCR_TAMPPRCH_0 ((uint32_t)0x00002000)
+#define RTC_TAFCR_TAMPPRCH_1 ((uint32_t)0x00004000)
+#define RTC_TAFCR_TAMPFLT ((uint32_t)0x00001800)
+#define RTC_TAFCR_TAMPFLT_0 ((uint32_t)0x00000800)
+#define RTC_TAFCR_TAMPFLT_1 ((uint32_t)0x00001000)
+#define RTC_TAFCR_TAMPFREQ ((uint32_t)0x00000700)
+#define RTC_TAFCR_TAMPFREQ_0 ((uint32_t)0x00000100)
+#define RTC_TAFCR_TAMPFREQ_1 ((uint32_t)0x00000200)
+#define RTC_TAFCR_TAMPFREQ_2 ((uint32_t)0x00000400)
+#define RTC_TAFCR_TAMPTS ((uint32_t)0x00000080)
+#define RTC_TAFCR_TAMP2TRG ((uint32_t)0x00000010)
+#define RTC_TAFCR_TAMP2E ((uint32_t)0x00000008)
+#define RTC_TAFCR_TAMPIE ((uint32_t)0x00000004)
+#define RTC_TAFCR_TAMP1TRG ((uint32_t)0x00000002)
+#define RTC_TAFCR_TAMP1E ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_ALRMASSR register ************/
+#define RTC_ALRMASSR_MASKSS ((uint32_t)0x0F000000)
+#define RTC_ALRMASSR_MASKSS_0 ((uint32_t)0x01000000)
+#define RTC_ALRMASSR_MASKSS_1 ((uint32_t)0x02000000)
+#define RTC_ALRMASSR_MASKSS_2 ((uint32_t)0x04000000)
+#define RTC_ALRMASSR_MASKSS_3 ((uint32_t)0x08000000)
+#define RTC_ALRMASSR_SS ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_BKP0R register ***************/
+#define RTC_BKP0R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP1R register ***************/
+#define RTC_BKP1R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP2R register ***************/
+#define RTC_BKP2R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP3R register ***************/
+#define RTC_BKP3R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP4R register ***************/
+#define RTC_BKP4R ((uint32_t)0xFFFFFFFF)
+
+/******************** Number of backup registers ******************************/
+#define RTC_BKP_NUMBER ((uint32_t)0x00000005)
+
+/*****************************************************************************/
+/* */
+/* Serial Peripheral Interface (SPI) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for SPI_CR1 register *******************/
+#define SPI_CR1_CPHA ((uint32_t)0x00000001) /*!< Clock Phase */
+#define SPI_CR1_CPOL ((uint32_t)0x00000002) /*!< Clock Polarity */
+#define SPI_CR1_MSTR ((uint32_t)0x00000004) /*!< Master Selection */
+#define SPI_CR1_BR ((uint32_t)0x00000038) /*!< BR[2:0] bits (Baud Rate Control) */
+#define SPI_CR1_BR_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define SPI_CR1_BR_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define SPI_CR1_BR_2 ((uint32_t)0x00000020) /*!< Bit 2 */
+#define SPI_CR1_SPE ((uint32_t)0x00000040) /*!< SPI Enable */
+#define SPI_CR1_LSBFIRST ((uint32_t)0x00000080) /*!< Frame Format */
+#define SPI_CR1_SSI ((uint32_t)0x00000100) /*!< Internal slave select */
+#define SPI_CR1_SSM ((uint32_t)0x00000200) /*!< Software slave management */
+#define SPI_CR1_RXONLY ((uint32_t)0x00000400) /*!< Receive only */
+#define SPI_CR1_CRCL ((uint32_t)0x00000800) /*!< CRC Length */
+#define SPI_CR1_CRCNEXT ((uint32_t)0x00001000) /*!< Transmit CRC next */
+#define SPI_CR1_CRCEN ((uint32_t)0x00002000) /*!< Hardware CRC calculation enable */
+#define SPI_CR1_BIDIOE ((uint32_t)0x00004000) /*!< Output enable in bidirectional mode */
+#define SPI_CR1_BIDIMODE ((uint32_t)0x00008000) /*!< Bidirectional data mode enable */
+
+/******************* Bit definition for SPI_CR2 register *******************/
+#define SPI_CR2_RXDMAEN ((uint32_t)0x00000001) /*!< Rx Buffer DMA Enable */
+#define SPI_CR2_TXDMAEN ((uint32_t)0x00000002) /*!< Tx Buffer DMA Enable */
+#define SPI_CR2_SSOE ((uint32_t)0x00000004) /*!< SS Output Enable */
+#define SPI_CR2_NSSP ((uint32_t)0x00000008) /*!< NSS pulse management Enable */
+#define SPI_CR2_FRF ((uint32_t)0x00000010) /*!< Frame Format Enable */
+#define SPI_CR2_ERRIE ((uint32_t)0x00000020) /*!< Error Interrupt Enable */
+#define SPI_CR2_RXNEIE ((uint32_t)0x00000040) /*!< RX buffer Not Empty Interrupt Enable */
+#define SPI_CR2_TXEIE ((uint32_t)0x00000080) /*!< Tx buffer Empty Interrupt Enable */
+#define SPI_CR2_DS ((uint32_t)0x00000F00) /*!< DS[3:0] Data Size */
+#define SPI_CR2_DS_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define SPI_CR2_DS_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define SPI_CR2_DS_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define SPI_CR2_DS_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+#define SPI_CR2_FRXTH ((uint32_t)0x00001000) /*!< FIFO reception Threshold */
+#define SPI_CR2_LDMARX ((uint32_t)0x00002000) /*!< Last DMA transfer for reception */
+#define SPI_CR2_LDMATX ((uint32_t)0x00004000) /*!< Last DMA transfer for transmission */
+
+/******************** Bit definition for SPI_SR register *******************/
+#define SPI_SR_RXNE ((uint32_t)0x00000001) /*!< Receive buffer Not Empty */
+#define SPI_SR_TXE ((uint32_t)0x00000002) /*!< Transmit buffer Empty */
+#define SPI_SR_CHSIDE ((uint32_t)0x00000004) /*!< Channel side */
+#define SPI_SR_UDR ((uint32_t)0x00000008) /*!< Underrun flag */
+#define SPI_SR_CRCERR ((uint32_t)0x00000010) /*!< CRC Error flag */
+#define SPI_SR_MODF ((uint32_t)0x00000020) /*!< Mode fault */
+#define SPI_SR_OVR ((uint32_t)0x00000040) /*!< Overrun flag */
+#define SPI_SR_BSY ((uint32_t)0x00000080) /*!< Busy flag */
+#define SPI_SR_FRE ((uint32_t)0x00000100) /*!< TI frame format error */
+#define SPI_SR_FRLVL ((uint32_t)0x00000600) /*!< FIFO Reception Level */
+#define SPI_SR_FRLVL_0 ((uint32_t)0x00000200) /*!< Bit 0 */
+#define SPI_SR_FRLVL_1 ((uint32_t)0x00000400) /*!< Bit 1 */
+#define SPI_SR_FTLVL ((uint32_t)0x00001800) /*!< FIFO Transmission Level */
+#define SPI_SR_FTLVL_0 ((uint32_t)0x00000800) /*!< Bit 0 */
+#define SPI_SR_FTLVL_1 ((uint32_t)0x00001000) /*!< Bit 1 */
+
+/******************** Bit definition for SPI_DR register *******************/
+#define SPI_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data Register */
+
+/******************* Bit definition for SPI_CRCPR register *****************/
+#define SPI_CRCPR_CRCPOLY ((uint32_t)0xFFFFFFFF) /*!< CRC polynomial register */
+
+/****************** Bit definition for SPI_RXCRCR register *****************/
+#define SPI_RXCRCR_RXCRC ((uint32_t)0xFFFFFFFF) /*!< Rx CRC Register */
+
+/****************** Bit definition for SPI_TXCRCR register *****************/
+#define SPI_TXCRCR_TXCRC ((uint32_t)0xFFFFFFFF) /*!< Tx CRC Register */
+
+/****************** Bit definition for SPI_I2SCFGR register ****************/
+#define SPI_I2SCFGR_CHLEN ((uint32_t)0x00000001) /*!<Channel length (number of bits per audio channel) */
+#define SPI_I2SCFGR_DATLEN ((uint32_t)0x00000006) /*!<DATLEN[1:0] bits (Data length to be transferred) */
+#define SPI_I2SCFGR_DATLEN_0 ((uint32_t)0x00000002) /*!<Bit 0 */
+#define SPI_I2SCFGR_DATLEN_1 ((uint32_t)0x00000004) /*!<Bit 1 */
+#define SPI_I2SCFGR_CKPOL ((uint32_t)0x00000008) /*!<steady state clock polarity */
+#define SPI_I2SCFGR_I2SSTD ((uint32_t)0x00000030) /*!<I2SSTD[1:0] bits (I2S standard selection) */
+#define SPI_I2SCFGR_I2SSTD_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SSTD_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define SPI_I2SCFGR_PCMSYNC ((uint32_t)0x00000080) /*!<PCM frame synchronization */
+#define SPI_I2SCFGR_I2SCFG ((uint32_t)0x00000300) /*!<I2SCFG[1:0] bits (I2S configuration mode) */
+#define SPI_I2SCFGR_I2SCFG_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SCFG_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define SPI_I2SCFGR_I2SE ((uint32_t)0x00000400) /*!<I2S Enable */
+#define SPI_I2SCFGR_I2SMOD ((uint32_t)0x00000800) /*!<I2S mode selection */
+
+/****************** Bit definition for SPI_I2SPR register ******************/
+#define SPI_I2SPR_I2SDIV ((uint32_t)0x000000FF) /*!<I2S Linear prescaler */
+#define SPI_I2SPR_ODD ((uint32_t)0x00000100) /*!<Odd factor for the prescaler */
+#define SPI_I2SPR_MCKOE ((uint32_t)0x00000200) /*!<Master Clock Output Enable */
+
+/*****************************************************************************/
+/* */
+/* System Configuration (SYSCFG) */
+/* */
+/*****************************************************************************/
+/***************** Bit definition for SYSCFG_CFGR1 register ****************/
+#define SYSCFG_CFGR1_MEM_MODE ((uint32_t)0x00000003) /*!< SYSCFG_Memory Remap Config */
+#define SYSCFG_CFGR1_MEM_MODE_0 ((uint32_t)0x00000001) /*!< SYSCFG_Memory Remap Config Bit 0 */
+#define SYSCFG_CFGR1_MEM_MODE_1 ((uint32_t)0x00000002) /*!< SYSCFG_Memory Remap Config Bit 1 */
+
+#define SYSCFG_CFGR1_DMA_RMP ((uint32_t)0x00001F00) /*!< DMA remap mask */
+#define SYSCFG_CFGR1_ADC_DMA_RMP ((uint32_t)0x00000100) /*!< ADC DMA remap */
+#define SYSCFG_CFGR1_USART1TX_DMA_RMP ((uint32_t)0x00000200) /*!< USART1 TX DMA remap */
+#define SYSCFG_CFGR1_USART1RX_DMA_RMP ((uint32_t)0x00000400) /*!< USART1 RX DMA remap */
+#define SYSCFG_CFGR1_TIM16_DMA_RMP ((uint32_t)0x00000800) /*!< Timer 16 DMA remap */
+#define SYSCFG_CFGR1_TIM17_DMA_RMP ((uint32_t)0x00001000) /*!< Timer 17 DMA remap */
+
+#define SYSCFG_CFGR1_I2C_FMP_PB6 ((uint32_t)0x00010000) /*!< I2C PB6 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB7 ((uint32_t)0x00020000) /*!< I2C PB7 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB8 ((uint32_t)0x00040000) /*!< I2C PB8 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB9 ((uint32_t)0x00080000) /*!< I2C PB9 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_I2C1 ((uint32_t)0x00100000) /*!< Enable Fast Mode Plus on PB10, PB11, PF6 and PF7 */
+#define SYSCFG_CFGR1_I2C_FMP_PA9 ((uint32_t)0x00400000) /*!< Enable Fast Mode Plus on PA9 */
+#define SYSCFG_CFGR1_I2C_FMP_PA10 ((uint32_t)0x00800000) /*!< Enable Fast Mode Plus on PA10 */
+
+/***************** Bit definition for SYSCFG_EXTICR1 register **************/
+#define SYSCFG_EXTICR1_EXTI0 ((uint16_t)0x000F) /*!< EXTI 0 configuration */
+#define SYSCFG_EXTICR1_EXTI1 ((uint16_t)0x00F0) /*!< EXTI 1 configuration */
+#define SYSCFG_EXTICR1_EXTI2 ((uint16_t)0x0F00) /*!< EXTI 2 configuration */
+#define SYSCFG_EXTICR1_EXTI3 ((uint16_t)0xF000) /*!< EXTI 3 configuration */
+
+/**
+ * @brief EXTI0 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI0_PA ((uint16_t)0x0000) /*!< PA[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PB ((uint16_t)0x0001) /*!< PB[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PC ((uint16_t)0x0002) /*!< PC[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PD ((uint16_t)0x0003) /*!< PD[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PF ((uint16_t)0x0005) /*!< PF[0] pin */
+
+/**
+ * @brief EXTI1 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI1_PA ((uint16_t)0x0000) /*!< PA[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PB ((uint16_t)0x0010) /*!< PB[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PC ((uint16_t)0x0020) /*!< PC[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PD ((uint16_t)0x0030) /*!< PD[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PF ((uint16_t)0x0050) /*!< PF[1] pin */
+
+/**
+ * @brief EXTI2 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI2_PA ((uint16_t)0x0000) /*!< PA[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PB ((uint16_t)0x0100) /*!< PB[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PC ((uint16_t)0x0200) /*!< PC[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PD ((uint16_t)0x0300) /*!< PD[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PF ((uint16_t)0x0500) /*!< PF[2] pin */
+
+/**
+ * @brief EXTI3 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI3_PA ((uint16_t)0x0000) /*!< PA[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PB ((uint16_t)0x1000) /*!< PB[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PC ((uint16_t)0x2000) /*!< PC[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PD ((uint16_t)0x3000) /*!< PD[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PF ((uint16_t)0x5000) /*!< PF[3] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR2 register **************/
+#define SYSCFG_EXTICR2_EXTI4 ((uint16_t)0x000F) /*!< EXTI 4 configuration */
+#define SYSCFG_EXTICR2_EXTI5 ((uint16_t)0x00F0) /*!< EXTI 5 configuration */
+#define SYSCFG_EXTICR2_EXTI6 ((uint16_t)0x0F00) /*!< EXTI 6 configuration */
+#define SYSCFG_EXTICR2_EXTI7 ((uint16_t)0xF000) /*!< EXTI 7 configuration */
+
+/**
+ * @brief EXTI4 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI4_PA ((uint16_t)0x0000) /*!< PA[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PB ((uint16_t)0x0001) /*!< PB[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PC ((uint16_t)0x0002) /*!< PC[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PD ((uint16_t)0x0003) /*!< PD[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PF ((uint16_t)0x0005) /*!< PF[4] pin */
+
+/**
+ * @brief EXTI5 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI5_PA ((uint16_t)0x0000) /*!< PA[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PB ((uint16_t)0x0010) /*!< PB[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PC ((uint16_t)0x0020) /*!< PC[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PD ((uint16_t)0x0030) /*!< PD[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PF ((uint16_t)0x0050) /*!< PF[5] pin */
+
+/**
+ * @brief EXTI6 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI6_PA ((uint16_t)0x0000) /*!< PA[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PB ((uint16_t)0x0100) /*!< PB[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PC ((uint16_t)0x0200) /*!< PC[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PD ((uint16_t)0x0300) /*!< PD[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PF ((uint16_t)0x0500) /*!< PF[6] pin */
+
+/**
+ * @brief EXTI7 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI7_PA ((uint16_t)0x0000) /*!< PA[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PB ((uint16_t)0x1000) /*!< PB[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PC ((uint16_t)0x2000) /*!< PC[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PD ((uint16_t)0x3000) /*!< PD[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PF ((uint16_t)0x5000) /*!< PF[7] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR3 register **************/
+#define SYSCFG_EXTICR3_EXTI8 ((uint16_t)0x000F) /*!< EXTI 8 configuration */
+#define SYSCFG_EXTICR3_EXTI9 ((uint16_t)0x00F0) /*!< EXTI 9 configuration */
+#define SYSCFG_EXTICR3_EXTI10 ((uint16_t)0x0F00) /*!< EXTI 10 configuration */
+#define SYSCFG_EXTICR3_EXTI11 ((uint16_t)0xF000) /*!< EXTI 11 configuration */
+
+/**
+ * @brief EXTI8 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI8_PA ((uint16_t)0x0000) /*!< PA[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PB ((uint16_t)0x0001) /*!< PB[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PC ((uint16_t)0x0002) /*!< PC[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PD ((uint16_t)0x0003) /*!< PD[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PF ((uint16_t)0x0005) /*!< PF[8] pin */
+
+/**
+ * @brief EXTI9 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI9_PA ((uint16_t)0x0000) /*!< PA[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PB ((uint16_t)0x0010) /*!< PB[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PC ((uint16_t)0x0020) /*!< PC[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PD ((uint16_t)0x0030) /*!< PD[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PF ((uint16_t)0x0050) /*!< PF[9] pin */
+
+/**
+ * @brief EXTI10 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI10_PA ((uint16_t)0x0000) /*!< PA[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PB ((uint16_t)0x0100) /*!< PB[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PC ((uint16_t)0x0200) /*!< PC[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PD ((uint16_t)0x0300) /*!< PD[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PF ((uint16_t)0x0500) /*!< PF[10] pin */
+
+/**
+ * @brief EXTI11 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI11_PA ((uint16_t)0x0000) /*!< PA[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PB ((uint16_t)0x1000) /*!< PB[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PC ((uint16_t)0x2000) /*!< PC[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PD ((uint16_t)0x3000) /*!< PD[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PF ((uint16_t)0x5000) /*!< PF[11] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR4 register **************/
+#define SYSCFG_EXTICR4_EXTI12 ((uint16_t)0x000F) /*!< EXTI 12 configuration */
+#define SYSCFG_EXTICR4_EXTI13 ((uint16_t)0x00F0) /*!< EXTI 13 configuration */
+#define SYSCFG_EXTICR4_EXTI14 ((uint16_t)0x0F00) /*!< EXTI 14 configuration */
+#define SYSCFG_EXTICR4_EXTI15 ((uint16_t)0xF000) /*!< EXTI 15 configuration */
+
+/**
+ * @brief EXTI12 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI12_PA ((uint16_t)0x0000) /*!< PA[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PB ((uint16_t)0x0001) /*!< PB[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PC ((uint16_t)0x0002) /*!< PC[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PD ((uint16_t)0x0003) /*!< PD[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PF ((uint16_t)0x0005) /*!< PF[12] pin */
+
+/**
+ * @brief EXTI13 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI13_PA ((uint16_t)0x0000) /*!< PA[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PB ((uint16_t)0x0010) /*!< PB[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PC ((uint16_t)0x0020) /*!< PC[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PD ((uint16_t)0x0030) /*!< PD[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PF ((uint16_t)0x0050) /*!< PF[13] pin */
+
+/**
+ * @brief EXTI14 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI14_PA ((uint16_t)0x0000) /*!< PA[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PB ((uint16_t)0x0100) /*!< PB[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PC ((uint16_t)0x0200) /*!< PC[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PD ((uint16_t)0x0300) /*!< PD[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PF ((uint16_t)0x0500) /*!< PF[14] pin */
+
+/**
+ * @brief EXTI15 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI15_PA ((uint16_t)0x0000) /*!< PA[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PB ((uint16_t)0x1000) /*!< PB[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PC ((uint16_t)0x2000) /*!< PC[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PD ((uint16_t)0x3000) /*!< PD[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PF ((uint16_t)0x5000) /*!< PF[15] pin */
+
+/***************** Bit definition for SYSCFG_CFGR2 register ****************/
+#define SYSCFG_CFGR2_LOCKUP_LOCK ((uint32_t)0x00000001) /*!< Enables and locks the LOCKUP (Hardfault) output of CortexM0 with Break Input of TIMER1 */
+#define SYSCFG_CFGR2_SRAM_PARITY_LOCK ((uint32_t)0x00000002) /*!< Enables and locks the SRAM_PARITY error signal with Break Input of TIMER1 */
+#define SYSCFG_CFGR2_SRAM_PEF ((uint32_t)0x00000100) /*!< SRAM Parity error flag */
+#define SYSCFG_CFGR2_SRAM_PE SYSCFG_CFGR2_SRAM_PEF /*!< SRAM Parity error flag (define maintained for legacy purpose) */
+
+/*****************************************************************************/
+/* */
+/* Timers (TIM) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for TIM_CR1 register *******************/
+#define TIM_CR1_CEN ((uint32_t)0x00000001) /*!<Counter enable */
+#define TIM_CR1_UDIS ((uint32_t)0x00000002) /*!<Update disable */
+#define TIM_CR1_URS ((uint32_t)0x00000004) /*!<Update request source */
+#define TIM_CR1_OPM ((uint32_t)0x00000008) /*!<One pulse mode */
+#define TIM_CR1_DIR ((uint32_t)0x00000010) /*!<Direction */
+
+#define TIM_CR1_CMS ((uint32_t)0x00000060) /*!<CMS[1:0] bits (Center-aligned mode selection) */
+#define TIM_CR1_CMS_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define TIM_CR1_CMS_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+
+#define TIM_CR1_ARPE ((uint32_t)0x00000080) /*!<Auto-reload preload enable */
+
+#define TIM_CR1_CKD ((uint32_t)0x00000300) /*!<CKD[1:0] bits (clock division) */
+#define TIM_CR1_CKD_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CR1_CKD_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+/******************* Bit definition for TIM_CR2 register *******************/
+#define TIM_CR2_CCPC ((uint32_t)0x00000001) /*!<Capture/Compare Preloaded Control */
+#define TIM_CR2_CCUS ((uint32_t)0x00000004) /*!<Capture/Compare Control Update Selection */
+#define TIM_CR2_CCDS ((uint32_t)0x00000008) /*!<Capture/Compare DMA Selection */
+
+#define TIM_CR2_MMS ((uint32_t)0x00000070) /*!<MMS[2:0] bits (Master Mode Selection) */
+#define TIM_CR2_MMS_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CR2_MMS_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CR2_MMS_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CR2_TI1S ((uint32_t)0x00000080) /*!<TI1 Selection */
+#define TIM_CR2_OIS1 ((uint32_t)0x00000100) /*!<Output Idle state 1 (OC1 output) */
+#define TIM_CR2_OIS1N ((uint32_t)0x00000200) /*!<Output Idle state 1 (OC1N output) */
+#define TIM_CR2_OIS2 ((uint32_t)0x00000400) /*!<Output Idle state 2 (OC2 output) */
+#define TIM_CR2_OIS2N ((uint32_t)0x00000800) /*!<Output Idle state 2 (OC2N output) */
+#define TIM_CR2_OIS3 ((uint32_t)0x00001000) /*!<Output Idle state 3 (OC3 output) */
+#define TIM_CR2_OIS3N ((uint32_t)0x00002000) /*!<Output Idle state 3 (OC3N output) */
+#define TIM_CR2_OIS4 ((uint32_t)0x00004000) /*!<Output Idle state 4 (OC4 output) */
+
+/******************* Bit definition for TIM_SMCR register ******************/
+#define TIM_SMCR_SMS ((uint32_t)0x00000007) /*!<SMS[2:0] bits (Slave mode selection) */
+#define TIM_SMCR_SMS_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_SMCR_SMS_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_SMCR_SMS_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+
+#define TIM_SMCR_OCCS ((uint32_t)0x00000008) /*!< OCREF clear selection */
+
+#define TIM_SMCR_TS ((uint32_t)0x00000070) /*!<TS[2:0] bits (Trigger selection) */
+#define TIM_SMCR_TS_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_SMCR_TS_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_SMCR_TS_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_SMCR_MSM ((uint32_t)0x00000080) /*!<Master/slave mode */
+
+#define TIM_SMCR_ETF ((uint32_t)0x00000F00) /*!<ETF[3:0] bits (External trigger filter) */
+#define TIM_SMCR_ETF_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_SMCR_ETF_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define TIM_SMCR_ETF_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define TIM_SMCR_ETF_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+
+#define TIM_SMCR_ETPS ((uint32_t)0x00003000) /*!<ETPS[1:0] bits (External trigger prescaler) */
+#define TIM_SMCR_ETPS_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_SMCR_ETPS_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+
+#define TIM_SMCR_ECE ((uint32_t)0x00004000) /*!<External clock enable */
+#define TIM_SMCR_ETP ((uint32_t)0x00008000) /*!<External trigger polarity */
+
+/******************* Bit definition for TIM_DIER register ******************/
+#define TIM_DIER_UIE ((uint32_t)0x00000001) /*!<Update interrupt enable */
+#define TIM_DIER_CC1IE ((uint32_t)0x00000002) /*!<Capture/Compare 1 interrupt enable */
+#define TIM_DIER_CC2IE ((uint32_t)0x00000004) /*!<Capture/Compare 2 interrupt enable */
+#define TIM_DIER_CC3IE ((uint32_t)0x00000008) /*!<Capture/Compare 3 interrupt enable */
+#define TIM_DIER_CC4IE ((uint32_t)0x00000010) /*!<Capture/Compare 4 interrupt enable */
+#define TIM_DIER_COMIE ((uint32_t)0x00000020) /*!<COM interrupt enable */
+#define TIM_DIER_TIE ((uint32_t)0x00000040) /*!<Trigger interrupt enable */
+#define TIM_DIER_BIE ((uint32_t)0x00000080) /*!<Break interrupt enable */
+#define TIM_DIER_UDE ((uint32_t)0x00000100) /*!<Update DMA request enable */
+#define TIM_DIER_CC1DE ((uint32_t)0x00000200) /*!<Capture/Compare 1 DMA request enable */
+#define TIM_DIER_CC2DE ((uint32_t)0x00000400) /*!<Capture/Compare 2 DMA request enable */
+#define TIM_DIER_CC3DE ((uint32_t)0x00000800) /*!<Capture/Compare 3 DMA request enable */
+#define TIM_DIER_CC4DE ((uint32_t)0x00001000) /*!<Capture/Compare 4 DMA request enable */
+#define TIM_DIER_COMDE ((uint32_t)0x00002000) /*!<COM DMA request enable */
+#define TIM_DIER_TDE ((uint32_t)0x00004000) /*!<Trigger DMA request enable */
+
+/******************** Bit definition for TIM_SR register *******************/
+#define TIM_SR_UIF ((uint32_t)0x00000001) /*!<Update interrupt Flag */
+#define TIM_SR_CC1IF ((uint32_t)0x00000002) /*!<Capture/Compare 1 interrupt Flag */
+#define TIM_SR_CC2IF ((uint32_t)0x00000004) /*!<Capture/Compare 2 interrupt Flag */
+#define TIM_SR_CC3IF ((uint32_t)0x00000008) /*!<Capture/Compare 3 interrupt Flag */
+#define TIM_SR_CC4IF ((uint32_t)0x00000010) /*!<Capture/Compare 4 interrupt Flag */
+#define TIM_SR_COMIF ((uint32_t)0x00000020) /*!<COM interrupt Flag */
+#define TIM_SR_TIF ((uint32_t)0x00000040) /*!<Trigger interrupt Flag */
+#define TIM_SR_BIF ((uint32_t)0x00000080) /*!<Break interrupt Flag */
+#define TIM_SR_CC1OF ((uint32_t)0x00000200) /*!<Capture/Compare 1 Overcapture Flag */
+#define TIM_SR_CC2OF ((uint32_t)0x00000400) /*!<Capture/Compare 2 Overcapture Flag */
+#define TIM_SR_CC3OF ((uint32_t)0x00000800) /*!<Capture/Compare 3 Overcapture Flag */
+#define TIM_SR_CC4OF ((uint32_t)0x00001000) /*!<Capture/Compare 4 Overcapture Flag */
+
+/******************* Bit definition for TIM_EGR register *******************/
+#define TIM_EGR_UG ((uint32_t)0x00000001) /*!<Update Generation */
+#define TIM_EGR_CC1G ((uint32_t)0x00000002) /*!<Capture/Compare 1 Generation */
+#define TIM_EGR_CC2G ((uint32_t)0x00000004) /*!<Capture/Compare 2 Generation */
+#define TIM_EGR_CC3G ((uint32_t)0x00000008) /*!<Capture/Compare 3 Generation */
+#define TIM_EGR_CC4G ((uint32_t)0x00000010) /*!<Capture/Compare 4 Generation */
+#define TIM_EGR_COMG ((uint32_t)0x00000020) /*!<Capture/Compare Control Update Generation */
+#define TIM_EGR_TG ((uint32_t)0x00000040) /*!<Trigger Generation */
+#define TIM_EGR_BG ((uint32_t)0x00000080) /*!<Break Generation */
+
+/****************** Bit definition for TIM_CCMR1 register ******************/
+#define TIM_CCMR1_CC1S ((uint32_t)0x00000003) /*!<CC1S[1:0] bits (Capture/Compare 1 Selection) */
+#define TIM_CCMR1_CC1S_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_CCMR1_CC1S_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC1FE ((uint32_t)0x00000004) /*!<Output Compare 1 Fast enable */
+#define TIM_CCMR1_OC1PE ((uint32_t)0x00000008) /*!<Output Compare 1 Preload enable */
+
+#define TIM_CCMR1_OC1M ((uint32_t)0x00000070) /*!<OC1M[2:0] bits (Output Compare 1 Mode) */
+#define TIM_CCMR1_OC1M_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR1_OC1M_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR1_OC1M_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CCMR1_OC1CE ((uint32_t)0x00000080) /*!<Output Compare 1Clear Enable */
+
+#define TIM_CCMR1_CC2S ((uint32_t)0x00000300) /*!<CC2S[1:0] bits (Capture/Compare 2 Selection) */
+#define TIM_CCMR1_CC2S_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CCMR1_CC2S_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC2FE ((uint32_t)0x00000400) /*!<Output Compare 2 Fast enable */
+#define TIM_CCMR1_OC2PE ((uint32_t)0x00000800) /*!<Output Compare 2 Preload enable */
+
+#define TIM_CCMR1_OC2M ((uint32_t)0x00007000) /*!<OC2M[2:0] bits (Output Compare 2 Mode) */
+#define TIM_CCMR1_OC2M_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR1_OC2M_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR1_OC2M_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+
+#define TIM_CCMR1_OC2CE ((uint32_t)0x00008000) /*!<Output Compare 2 Clear Enable */
+
+/*---------------------------------------------------------------------------*/
+
+#define TIM_CCMR1_IC1PSC ((uint32_t)0x0000000C) /*!<IC1PSC[1:0] bits (Input Capture 1 Prescaler) */
+#define TIM_CCMR1_IC1PSC_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define TIM_CCMR1_IC1PSC_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC1F ((uint32_t)0x000000F0) /*!<IC1F[3:0] bits (Input Capture 1 Filter) */
+#define TIM_CCMR1_IC1F_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR1_IC1F_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR1_IC1F_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define TIM_CCMR1_IC1F_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define TIM_CCMR1_IC2PSC ((uint32_t)0x00000C00) /*!<IC2PSC[1:0] bits (Input Capture 2 Prescaler) */
+#define TIM_CCMR1_IC2PSC_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define TIM_CCMR1_IC2PSC_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC2F ((uint32_t)0x0000F000) /*!<IC2F[3:0] bits (Input Capture 2 Filter) */
+#define TIM_CCMR1_IC2F_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR1_IC2F_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR1_IC2F_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define TIM_CCMR1_IC2F_3 ((uint32_t)0x00008000) /*!<Bit 3 */
+
+/****************** Bit definition for TIM_CCMR2 register ******************/
+#define TIM_CCMR2_CC3S ((uint32_t)0x00000003) /*!<CC3S[1:0] bits (Capture/Compare 3 Selection) */
+#define TIM_CCMR2_CC3S_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_CCMR2_CC3S_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC3FE ((uint32_t)0x00000004) /*!<Output Compare 3 Fast enable */
+#define TIM_CCMR2_OC3PE ((uint32_t)0x00000008) /*!<Output Compare 3 Preload enable */
+
+#define TIM_CCMR2_OC3M ((uint32_t)0x00000070) /*!<OC3M[2:0] bits (Output Compare 3 Mode) */
+#define TIM_CCMR2_OC3M_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR2_OC3M_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR2_OC3M_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CCMR2_OC3CE ((uint32_t)0x00000080) /*!<Output Compare 3 Clear Enable */
+
+#define TIM_CCMR2_CC4S ((uint32_t)0x00000300) /*!<CC4S[1:0] bits (Capture/Compare 4 Selection) */
+#define TIM_CCMR2_CC4S_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CCMR2_CC4S_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC4FE ((uint32_t)0x00000400) /*!<Output Compare 4 Fast enable */
+#define TIM_CCMR2_OC4PE ((uint32_t)0x00000800) /*!<Output Compare 4 Preload enable */
+
+#define TIM_CCMR2_OC4M ((uint32_t)0x00007000) /*!<OC4M[2:0] bits (Output Compare 4 Mode) */
+#define TIM_CCMR2_OC4M_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR2_OC4M_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR2_OC4M_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+
+#define TIM_CCMR2_OC4CE ((uint32_t)0x00008000) /*!<Output Compare 4 Clear Enable */
+
+/*---------------------------------------------------------------------------*/
+
+#define TIM_CCMR2_IC3PSC ((uint32_t)0x0000000C) /*!<IC3PSC[1:0] bits (Input Capture 3 Prescaler) */
+#define TIM_CCMR2_IC3PSC_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define TIM_CCMR2_IC3PSC_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC3F ((uint32_t)0x000000F0) /*!<IC3F[3:0] bits (Input Capture 3 Filter) */
+#define TIM_CCMR2_IC3F_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR2_IC3F_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR2_IC3F_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define TIM_CCMR2_IC3F_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define TIM_CCMR2_IC4PSC ((uint32_t)0x00000C00) /*!<IC4PSC[1:0] bits (Input Capture 4 Prescaler) */
+#define TIM_CCMR2_IC4PSC_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define TIM_CCMR2_IC4PSC_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC4F ((uint32_t)0x0000F000) /*!<IC4F[3:0] bits (Input Capture 4 Filter) */
+#define TIM_CCMR2_IC4F_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR2_IC4F_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR2_IC4F_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define TIM_CCMR2_IC4F_3 ((uint32_t)0x00008000) /*!<Bit 3 */
+
+/******************* Bit definition for TIM_CCER register ******************/
+#define TIM_CCER_CC1E ((uint32_t)0x00000001) /*!<Capture/Compare 1 output enable */
+#define TIM_CCER_CC1P ((uint32_t)0x00000002) /*!<Capture/Compare 1 output Polarity */
+#define TIM_CCER_CC1NE ((uint32_t)0x00000004) /*!<Capture/Compare 1 Complementary output enable */
+#define TIM_CCER_CC1NP ((uint32_t)0x00000008) /*!<Capture/Compare 1 Complementary output Polarity */
+#define TIM_CCER_CC2E ((uint32_t)0x00000010) /*!<Capture/Compare 2 output enable */
+#define TIM_CCER_CC2P ((uint32_t)0x00000020) /*!<Capture/Compare 2 output Polarity */
+#define TIM_CCER_CC2NE ((uint32_t)0x00000040) /*!<Capture/Compare 2 Complementary output enable */
+#define TIM_CCER_CC2NP ((uint32_t)0x00000080) /*!<Capture/Compare 2 Complementary output Polarity */
+#define TIM_CCER_CC3E ((uint32_t)0x00000100) /*!<Capture/Compare 3 output enable */
+#define TIM_CCER_CC3P ((uint32_t)0x00000200) /*!<Capture/Compare 3 output Polarity */
+#define TIM_CCER_CC3NE ((uint32_t)0x00000400) /*!<Capture/Compare 3 Complementary output enable */
+#define TIM_CCER_CC3NP ((uint32_t)0x00000800) /*!<Capture/Compare 3 Complementary output Polarity */
+#define TIM_CCER_CC4E ((uint32_t)0x00001000) /*!<Capture/Compare 4 output enable */
+#define TIM_CCER_CC4P ((uint32_t)0x00002000) /*!<Capture/Compare 4 output Polarity */
+#define TIM_CCER_CC4NP ((uint32_t)0x00008000) /*!<Capture/Compare 4 Complementary output Polarity */
+
+/******************* Bit definition for TIM_CNT register *******************/
+#define TIM_CNT_CNT ((uint32_t)0xFFFFFFFF) /*!<Counter Value */
+
+/******************* Bit definition for TIM_PSC register *******************/
+#define TIM_PSC_PSC ((uint32_t)0x0000FFFF) /*!<Prescaler Value */
+
+/******************* Bit definition for TIM_ARR register *******************/
+#define TIM_ARR_ARR ((uint32_t)0xFFFFFFFF) /*!<actual auto-reload Value */
+
+/******************* Bit definition for TIM_RCR register *******************/
+#define TIM_RCR_REP ((uint32_t)0x000000FF) /*!<Repetition Counter Value */
+
+/******************* Bit definition for TIM_CCR1 register ******************/
+#define TIM_CCR1_CCR1 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 1 Value */
+
+/******************* Bit definition for TIM_CCR2 register ******************/
+#define TIM_CCR2_CCR2 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 2 Value */
+
+/******************* Bit definition for TIM_CCR3 register ******************/
+#define TIM_CCR3_CCR3 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 3 Value */
+
+/******************* Bit definition for TIM_CCR4 register ******************/
+#define TIM_CCR4_CCR4 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 4 Value */
+
+/******************* Bit definition for TIM_BDTR register ******************/
+#define TIM_BDTR_DTG ((uint32_t)0x000000FF) /*!<DTG[0:7] bits (Dead-Time Generator set-up) */
+#define TIM_BDTR_DTG_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_BDTR_DTG_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_BDTR_DTG_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define TIM_BDTR_DTG_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define TIM_BDTR_DTG_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define TIM_BDTR_DTG_5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define TIM_BDTR_DTG_6 ((uint32_t)0x00000040) /*!<Bit 6 */
+#define TIM_BDTR_DTG_7 ((uint32_t)0x00000080) /*!<Bit 7 */
+
+#define TIM_BDTR_LOCK ((uint32_t)0x00000300) /*!<LOCK[1:0] bits (Lock Configuration) */
+#define TIM_BDTR_LOCK_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_BDTR_LOCK_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_BDTR_OSSI ((uint32_t)0x00000400) /*!<Off-State Selection for Idle mode */
+#define TIM_BDTR_OSSR ((uint32_t)0x00000800) /*!<Off-State Selection for Run mode */
+#define TIM_BDTR_BKE ((uint32_t)0x00001000) /*!<Break enable */
+#define TIM_BDTR_BKP ((uint32_t)0x00002000) /*!<Break Polarity */
+#define TIM_BDTR_AOE ((uint32_t)0x00004000) /*!<Automatic Output enable */
+#define TIM_BDTR_MOE ((uint32_t)0x00008000) /*!<Main Output enable */
+
+/******************* Bit definition for TIM_DCR register *******************/
+#define TIM_DCR_DBA ((uint32_t)0x0000001F) /*!<DBA[4:0] bits (DMA Base Address) */
+#define TIM_DCR_DBA_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_DCR_DBA_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_DCR_DBA_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define TIM_DCR_DBA_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define TIM_DCR_DBA_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+
+#define TIM_DCR_DBL ((uint32_t)0x00001F00) /*!<DBL[4:0] bits (DMA Burst Length) */
+#define TIM_DCR_DBL_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_DCR_DBL_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define TIM_DCR_DBL_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define TIM_DCR_DBL_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define TIM_DCR_DBL_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+
+/******************* Bit definition for TIM_DMAR register ******************/
+#define TIM_DMAR_DMAB ((uint32_t)0x0000FFFF) /*!<DMA register for burst accesses */
+
+/******************* Bit definition for TIM14_OR register ********************/
+#define TIM14_OR_TI1_RMP ((uint32_t)0x00000003) /*!<TI1_RMP[1:0] bits (TIM14 Input 4 remap) */
+#define TIM14_OR_TI1_RMP_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM14_OR_TI1_RMP_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+
+/******************************************************************************/
+/* */
+/* Universal Synchronous Asynchronous Receiver Transmitter (USART) */
+/* */
+/******************************************************************************/
+/****************** Bit definition for USART_CR1 register *******************/
+#define USART_CR1_UE ((uint32_t)0x00000001) /*!< USART Enable */
+#define USART_CR1_UESM ((uint32_t)0x00000002) /*!< USART Enable in STOP Mode */
+#define USART_CR1_RE ((uint32_t)0x00000004) /*!< Receiver Enable */
+#define USART_CR1_TE ((uint32_t)0x00000008) /*!< Transmitter Enable */
+#define USART_CR1_IDLEIE ((uint32_t)0x00000010) /*!< IDLE Interrupt Enable */
+#define USART_CR1_RXNEIE ((uint32_t)0x00000020) /*!< RXNE Interrupt Enable */
+#define USART_CR1_TCIE ((uint32_t)0x00000040) /*!< Transmission Complete Interrupt Enable */
+#define USART_CR1_TXEIE ((uint32_t)0x00000080) /*!< TXE Interrupt Enable */
+#define USART_CR1_PEIE ((uint32_t)0x00000100) /*!< PE Interrupt Enable */
+#define USART_CR1_PS ((uint32_t)0x00000200) /*!< Parity Selection */
+#define USART_CR1_PCE ((uint32_t)0x00000400) /*!< Parity Control Enable */
+#define USART_CR1_WAKE ((uint32_t)0x00000800) /*!< Receiver Wakeup method */
+#define USART_CR1_M0 ((uint32_t)0x00001000) /*!< Word length bit 0 */
+#define USART_CR1_M ((uint32_t)0x00001000) /*!< SmartCard Length */
+#define USART_CR1_MME ((uint32_t)0x00002000) /*!< Mute Mode Enable */
+#define USART_CR1_CMIE ((uint32_t)0x00004000) /*!< Character match interrupt enable */
+#define USART_CR1_OVER8 ((uint32_t)0x00008000) /*!< Oversampling by 8-bit or 16-bit mode */
+#define USART_CR1_DEDT ((uint32_t)0x001F0000) /*!< DEDT[4:0] bits (Driver Enable Deassertion Time) */
+#define USART_CR1_DEDT_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define USART_CR1_DEDT_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define USART_CR1_DEDT_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define USART_CR1_DEDT_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+#define USART_CR1_DEDT_4 ((uint32_t)0x00100000) /*!< Bit 4 */
+#define USART_CR1_DEAT ((uint32_t)0x03E00000) /*!< DEAT[4:0] bits (Driver Enable Assertion Time) */
+#define USART_CR1_DEAT_0 ((uint32_t)0x00200000) /*!< Bit 0 */
+#define USART_CR1_DEAT_1 ((uint32_t)0x00400000) /*!< Bit 1 */
+#define USART_CR1_DEAT_2 ((uint32_t)0x00800000) /*!< Bit 2 */
+#define USART_CR1_DEAT_3 ((uint32_t)0x01000000) /*!< Bit 3 */
+#define USART_CR1_DEAT_4 ((uint32_t)0x02000000) /*!< Bit 4 */
+#define USART_CR1_RTOIE ((uint32_t)0x04000000) /*!< Receive Time Out interrupt enable */
+#define USART_CR1_EOBIE ((uint32_t)0x08000000) /*!< End of Block interrupt enable */
+
+/****************** Bit definition for USART_CR2 register *******************/
+#define USART_CR2_ADDM7 ((uint32_t)0x00000010) /*!< 7-bit or 4-bit Address Detection */
+#define USART_CR2_LBDL ((uint32_t)0x00000020) /*!< LIN Break Detection Length */
+#define USART_CR2_LBDIE ((uint32_t)0x00000040) /*!< LIN Break Detection Interrupt Enable */
+#define USART_CR2_LBCL ((uint32_t)0x00000100) /*!< Last Bit Clock pulse */
+#define USART_CR2_CPHA ((uint32_t)0x00000200) /*!< Clock Phase */
+#define USART_CR2_CPOL ((uint32_t)0x00000400) /*!< Clock Polarity */
+#define USART_CR2_CLKEN ((uint32_t)0x00000800) /*!< Clock Enable */
+#define USART_CR2_STOP ((uint32_t)0x00003000) /*!< STOP[1:0] bits (STOP bits) */
+#define USART_CR2_STOP_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define USART_CR2_STOP_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+#define USART_CR2_LINEN ((uint32_t)0x00004000) /*!< LIN mode enable */
+#define USART_CR2_SWAP ((uint32_t)0x00008000) /*!< SWAP TX/RX pins */
+#define USART_CR2_RXINV ((uint32_t)0x00010000) /*!< RX pin active level inversion */
+#define USART_CR2_TXINV ((uint32_t)0x00020000) /*!< TX pin active level inversion */
+#define USART_CR2_DATAINV ((uint32_t)0x00040000) /*!< Binary data inversion */
+#define USART_CR2_MSBFIRST ((uint32_t)0x00080000) /*!< Most Significant Bit First */
+#define USART_CR2_ABREN ((uint32_t)0x00100000) /*!< Auto Baud-Rate Enable*/
+#define USART_CR2_ABRMODE ((uint32_t)0x00600000) /*!< ABRMOD[1:0] bits (Auto Baud-Rate Mode) */
+#define USART_CR2_ABRMODE_0 ((uint32_t)0x00200000) /*!< Bit 0 */
+#define USART_CR2_ABRMODE_1 ((uint32_t)0x00400000) /*!< Bit 1 */
+#define USART_CR2_RTOEN ((uint32_t)0x00800000) /*!< Receiver Time-Out enable */
+#define USART_CR2_ADD ((uint32_t)0xFF000000) /*!< Address of the USART node */
+
+/****************** Bit definition for USART_CR3 register *******************/
+#define USART_CR3_EIE ((uint32_t)0x00000001) /*!< Error Interrupt Enable */
+#define USART_CR3_IREN ((uint32_t)0x00000002) /*!< IrDA mode Enable */
+#define USART_CR3_IRLP ((uint32_t)0x00000004) /*!< IrDA Low-Power */
+#define USART_CR3_HDSEL ((uint32_t)0x00000008) /*!< Half-Duplex Selection */
+#define USART_CR3_NACK ((uint32_t)0x00000010) /*!< SmartCard NACK enable */
+#define USART_CR3_SCEN ((uint32_t)0x00000020) /*!< SmartCard mode enable */
+#define USART_CR3_DMAR ((uint32_t)0x00000040) /*!< DMA Enable Receiver */
+#define USART_CR3_DMAT ((uint32_t)0x00000080) /*!< DMA Enable Transmitter */
+#define USART_CR3_RTSE ((uint32_t)0x00000100) /*!< RTS Enable */
+#define USART_CR3_CTSE ((uint32_t)0x00000200) /*!< CTS Enable */
+#define USART_CR3_CTSIE ((uint32_t)0x00000400) /*!< CTS Interrupt Enable */
+#define USART_CR3_ONEBIT ((uint32_t)0x00000800) /*!< One sample bit method enable */
+#define USART_CR3_OVRDIS ((uint32_t)0x00001000) /*!< Overrun Disable */
+#define USART_CR3_DDRE ((uint32_t)0x00002000) /*!< DMA Disable on Reception Error */
+#define USART_CR3_DEM ((uint32_t)0x00004000) /*!< Driver Enable Mode */
+#define USART_CR3_DEP ((uint32_t)0x00008000) /*!< Driver Enable Polarity Selection */
+#define USART_CR3_SCARCNT ((uint32_t)0x000E0000) /*!< SCARCNT[2:0] bits (SmartCard Auto-Retry Count) */
+#define USART_CR3_SCARCNT_0 ((uint32_t)0x00020000) /*!< Bit 0 */
+#define USART_CR3_SCARCNT_1 ((uint32_t)0x00040000) /*!< Bit 1 */
+#define USART_CR3_SCARCNT_2 ((uint32_t)0x00080000) /*!< Bit 2 */
+#define USART_CR3_WUS ((uint32_t)0x00300000) /*!< WUS[1:0] bits (Wake UP Interrupt Flag Selection) */
+#define USART_CR3_WUS_0 ((uint32_t)0x00100000) /*!< Bit 0 */
+#define USART_CR3_WUS_1 ((uint32_t)0x00200000) /*!< Bit 1 */
+#define USART_CR3_WUFIE ((uint32_t)0x00400000) /*!< Wake Up Interrupt Enable */
+
+/****************** Bit definition for USART_BRR register *******************/
+#define USART_BRR_DIV_FRACTION ((uint32_t)0x0000000F) /*!< Fraction of USARTDIV */
+#define USART_BRR_DIV_MANTISSA ((uint32_t)0x0000FFF0) /*!< Mantissa of USARTDIV */
+
+/****************** Bit definition for USART_GTPR register ******************/
+#define USART_GTPR_PSC ((uint32_t)0x000000FF) /*!< PSC[7:0] bits (Prescaler value) */
+#define USART_GTPR_GT ((uint32_t)0x0000FF00) /*!< GT[7:0] bits (Guard time value) */
+
+
+/******************* Bit definition for USART_RTOR register *****************/
+#define USART_RTOR_RTO ((uint32_t)0x00FFFFFF) /*!< Receiver Time Out Value */
+#define USART_RTOR_BLEN ((uint32_t)0xFF000000) /*!< Block Length */
+
+/******************* Bit definition for USART_RQR register ******************/
+#define USART_RQR_ABRRQ ((uint32_t)0x00000001) /*!< Auto-Baud Rate Request */
+#define USART_RQR_SBKRQ ((uint32_t)0x00000002) /*!< Send Break Request */
+#define USART_RQR_MMRQ ((uint32_t)0x00000004) /*!< Mute Mode Request */
+#define USART_RQR_RXFRQ ((uint32_t)0x00000008) /*!< Receive Data flush Request */
+#define USART_RQR_TXFRQ ((uint32_t)0x00000010) /*!< Transmit data flush Request */
+
+/******************* Bit definition for USART_ISR register ******************/
+#define USART_ISR_PE ((uint32_t)0x00000001) /*!< Parity Error */
+#define USART_ISR_FE ((uint32_t)0x00000002) /*!< Framing Error */
+#define USART_ISR_NE ((uint32_t)0x00000004) /*!< Noise detected Flag */
+#define USART_ISR_ORE ((uint32_t)0x00000008) /*!< OverRun Error */
+#define USART_ISR_IDLE ((uint32_t)0x00000010) /*!< IDLE line detected */
+#define USART_ISR_RXNE ((uint32_t)0x00000020) /*!< Read Data Register Not Empty */
+#define USART_ISR_TC ((uint32_t)0x00000040) /*!< Transmission Complete */
+#define USART_ISR_TXE ((uint32_t)0x00000080) /*!< Transmit Data Register Empty */
+#define USART_ISR_LBDF ((uint32_t)0x00000100) /*!< LIN Break Detection Flag */
+#define USART_ISR_CTSIF ((uint32_t)0x00000200) /*!< CTS interrupt flag */
+#define USART_ISR_CTS ((uint32_t)0x00000400) /*!< CTS flag */
+#define USART_ISR_RTOF ((uint32_t)0x00000800) /*!< Receiver Time Out */
+#define USART_ISR_EOBF ((uint32_t)0x00001000) /*!< End Of Block Flag */
+#define USART_ISR_ABRE ((uint32_t)0x00004000) /*!< Auto-Baud Rate Error */
+#define USART_ISR_ABRF ((uint32_t)0x00008000) /*!< Auto-Baud Rate Flag */
+#define USART_ISR_BUSY ((uint32_t)0x00010000) /*!< Busy Flag */
+#define USART_ISR_CMF ((uint32_t)0x00020000) /*!< Character Match Flag */
+#define USART_ISR_SBKF ((uint32_t)0x00040000) /*!< Send Break Flag */
+#define USART_ISR_RWU ((uint32_t)0x00080000) /*!< Receive Wake Up from mute mode Flag */
+#define USART_ISR_WUF ((uint32_t)0x00100000) /*!< Wake Up from stop mode Flag */
+#define USART_ISR_TEACK ((uint32_t)0x00200000) /*!< Transmit Enable Acknowledge Flag */
+#define USART_ISR_REACK ((uint32_t)0x00400000) /*!< Receive Enable Acknowledge Flag */
+
+/******************* Bit definition for USART_ICR register ******************/
+#define USART_ICR_PECF ((uint32_t)0x00000001) /*!< Parity Error Clear Flag */
+#define USART_ICR_FECF ((uint32_t)0x00000002) /*!< Framing Error Clear Flag */
+#define USART_ICR_NCF ((uint32_t)0x00000004) /*!< Noise detected Clear Flag */
+#define USART_ICR_ORECF ((uint32_t)0x00000008) /*!< OverRun Error Clear Flag */
+#define USART_ICR_IDLECF ((uint32_t)0x00000010) /*!< IDLE line detected Clear Flag */
+#define USART_ICR_TCCF ((uint32_t)0x00000040) /*!< Transmission Complete Clear Flag */
+#define USART_ICR_LBDCF ((uint32_t)0x00000100) /*!< LIN Break Detection Clear Flag */
+#define USART_ICR_CTSCF ((uint32_t)0x00000200) /*!< CTS Interrupt Clear Flag */
+#define USART_ICR_RTOCF ((uint32_t)0x00000800) /*!< Receiver Time Out Clear Flag */
+#define USART_ICR_EOBCF ((uint32_t)0x00001000) /*!< End Of Block Clear Flag */
+#define USART_ICR_CMCF ((uint32_t)0x00020000) /*!< Character Match Clear Flag */
+#define USART_ICR_WUCF ((uint32_t)0x00100000) /*!< Wake Up from stop mode Clear Flag */
+
+/******************* Bit definition for USART_RDR register ******************/
+#define USART_RDR_RDR ((uint16_t)0x01FF) /*!< RDR[8:0] bits (Receive Data value) */
+
+/******************* Bit definition for USART_TDR register ******************/
+#define USART_TDR_TDR ((uint16_t)0x01FF) /*!< TDR[8:0] bits (Transmit Data value) */
+
+/******************************************************************************/
+/* */
+/* Window WATCHDOG (WWDG) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for WWDG_CR register ********************/
+#define WWDG_CR_T ((uint32_t)0x7F) /*!<T[6:0] bits (7-Bit counter (MSB to LSB)) */
+#define WWDG_CR_T0 ((uint32_t)0x01) /*!<Bit 0 */
+#define WWDG_CR_T1 ((uint32_t)0x02) /*!<Bit 1 */
+#define WWDG_CR_T2 ((uint32_t)0x04) /*!<Bit 2 */
+#define WWDG_CR_T3 ((uint32_t)0x08) /*!<Bit 3 */
+#define WWDG_CR_T4 ((uint32_t)0x10) /*!<Bit 4 */
+#define WWDG_CR_T5 ((uint32_t)0x20) /*!<Bit 5 */
+#define WWDG_CR_T6 ((uint32_t)0x40) /*!<Bit 6 */
+
+#define WWDG_CR_WDGA ((uint32_t)0x80) /*!<Activation bit */
+
+/******************* Bit definition for WWDG_CFR register *******************/
+#define WWDG_CFR_W ((uint32_t)0x007F) /*!<W[6:0] bits (7-bit window value) */
+#define WWDG_CFR_W0 ((uint32_t)0x0001) /*!<Bit 0 */
+#define WWDG_CFR_W1 ((uint32_t)0x0002) /*!<Bit 1 */
+#define WWDG_CFR_W2 ((uint32_t)0x0004) /*!<Bit 2 */
+#define WWDG_CFR_W3 ((uint32_t)0x0008) /*!<Bit 3 */
+#define WWDG_CFR_W4 ((uint32_t)0x0010) /*!<Bit 4 */
+#define WWDG_CFR_W5 ((uint32_t)0x0020) /*!<Bit 5 */
+#define WWDG_CFR_W6 ((uint32_t)0x0040) /*!<Bit 6 */
+
+#define WWDG_CFR_WDGTB ((uint32_t)0x0180) /*!<WDGTB[1:0] bits (Timer Base) */
+#define WWDG_CFR_WDGTB0 ((uint32_t)0x0080) /*!<Bit 0 */
+#define WWDG_CFR_WDGTB1 ((uint32_t)0x0100) /*!<Bit 1 */
+
+#define WWDG_CFR_EWI ((uint32_t)0x0200) /*!<Early Wakeup Interrupt */
+
+/******************* Bit definition for WWDG_SR register ********************/
+#define WWDG_SR_EWIF ((uint32_t)0x01) /*!<Early Wakeup Interrupt Flag */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+
+/** @addtogroup Exported_macro
+ * @{
+ */
+
+/****************************** ADC Instances *********************************/
+#define IS_ADC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == ADC1)
+
+#define IS_ADC_COMMON_INSTANCE(INSTANCE) ((INSTANCE) == ADC)
+
+/****************************** CRC Instances *********************************/
+#define IS_CRC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CRC)
+
+/******************************* DMA Instances ******************************/
+#define IS_DMA_ALL_INSTANCE(INSTANCE) (((INSTANCE) == DMA1_Channel1) || \
+ ((INSTANCE) == DMA1_Channel2) || \
+ ((INSTANCE) == DMA1_Channel3) || \
+ ((INSTANCE) == DMA1_Channel4) || \
+ ((INSTANCE) == DMA1_Channel5))
+
+/****************************** GPIO Instances ********************************/
+#define IS_GPIO_ALL_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB) || \
+ ((INSTANCE) == GPIOC) || \
+ ((INSTANCE) == GPIOF))
+
+#define IS_GPIO_AF_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB))
+
+#define IS_GPIO_LOCK_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB))
+
+/****************************** I2C Instances *********************************/
+#define IS_I2C_ALL_INSTANCE(INSTANCE) ((INSTANCE) == I2C1)
+
+/****************************** I2S Instances *********************************/
+#define IS_I2S_ALL_INSTANCE(INSTANCE) ((INSTANCE) == SPI1)
+
+/****************************** IWDG Instances ********************************/
+#define IS_IWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == IWDG)
+
+/****************************** RTC Instances *********************************/
+#define IS_RTC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == RTC)
+
+/****************************** SMBUS Instances *********************************/
+#define IS_SMBUS_ALL_INSTANCE(INSTANCE) ((INSTANCE) == I2C1)
+
+/****************************** SPI Instances *********************************/
+#define IS_SPI_ALL_INSTANCE(INSTANCE) ((INSTANCE) == SPI1)
+
+/****************************** TIM Instances *********************************/
+#define IS_TIM_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CC1_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CC2_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CC3_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CC4_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_TIX_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_ENCODER_INTERFACE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_HALL_INTERFACE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1))
+
+#define IS_TIM_XOR_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_MASTER_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_SLAVE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_32B_COUNTER_INSTANCE(INSTANCE)\
+ ((INSTANCE) == TIM2)
+
+#define IS_TIM_DMABURST_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_BREAK_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CCX_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM2) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM3) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM14) && \
+ (((CHANNEL) == TIM_CHANNEL_1))) \
+ || \
+ (((INSTANCE) == TIM16) && \
+ (((CHANNEL) == TIM_CHANNEL_1))) \
+ || \
+ (((INSTANCE) == TIM17) && \
+ (((CHANNEL) == TIM_CHANNEL_1))))
+
+#define IS_TIM_CCXN_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3))) \
+ || \
+ (((INSTANCE) == TIM16) && \
+ ((CHANNEL) == TIM_CHANNEL_1)) \
+ || \
+ (((INSTANCE) == TIM17) && \
+ ((CHANNEL) == TIM_CHANNEL_1)))
+
+#define IS_TIM_COUNTER_MODE_SELECT_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_REPETITION_COUNTER_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CLOCK_DIVISION_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_DMA_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_DMA_CC_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_COMMUTATION_EVENT_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_REMAP_INSTANCE(INSTANCE)\
+ ((INSTANCE) == TIM14)
+
+/*********************** UART Instances : IRDA mode ***************************/
+#define IS_IRDA_INSTANCE(INSTANCE) (((INSTANCE) == USART1))
+
+/********************* UART Instances : Smard card mode ***********************/
+#define IS_SMARTCARD_INSTANCE(INSTANCE) (((INSTANCE) == USART1))
+
+/******************** USART Instances : Synchronous mode **********************/
+#define IS_USART_INSTANCE(INSTANCE) (((INSTANCE) == USART1))
+
+/******************** USART Instances : auto Baud rate detection **************/
+#define IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(INSTANCE) (((INSTANCE) == USART1))
+
+/******************** UART Instances : Asynchronous mode **********************/
+#define IS_UART_INSTANCE(INSTANCE) (((INSTANCE) == USART1))
+
+/******************** UART Instances : Half-Duplex mode **********************/
+#define IS_UART_HALFDUPLEX_INSTANCE(INSTANCE) ((INSTANCE) == USART1)
+
+/****************** UART Instances : Hardware Flow control ********************/
+#define IS_UART_HWFLOW_INSTANCE(INSTANCE) (((INSTANCE) == USART1))
+
+/****************** UART Instances : LIN mode ********************/
+#define IS_UART_LIN_INSTANCE(INSTANCE) ((INSTANCE) == USART1)
+
+/****************** UART Instances : wakeup from stop mode ********************/
+#define IS_UART_WAKEUP_INSTANCE(INSTANCE) ((INSTANCE) == USART1)
+
+/****************** UART Instances : Auto Baud Rate detection ********************/
+#define IS_UART_AUTOBAUDRATE_DETECTION_INSTANCE(INSTANCE) (((INSTANCE) == USART1))
+
+/****************** UART Instances : Driver enable detection ********************/
+#define IS_UART_DRIVER_ENABLE_INSTANCE(INSTANCE) (((INSTANCE) == USART1))
+
+/****************************** WWDG Instances ********************************/
+#define IS_WWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == WWDG)
+
+/**
+ * @}
+ */
+
+
+/******************************************************************************/
+/* For a painless codes migration between the STM32F0xx device product */
+/* lines, the aliases defined below are put in place to overcome the */
+/* differences in the interrupt handlers and IRQn definitions. */
+/* No need to update developed interrupt code when moving across */
+/* product lines within the same STM32F0 Family */
+/******************************************************************************/
+
+/* Aliases for __IRQn */
+#define RCC_CRS_IRQn RCC_IRQn
+#define DMA1_Channel4_5_6_7_IRQn DMA1_Channel4_5_IRQn
+#define ADC1_COMP_IRQn ADC1_IRQn
+
+/* Aliases for __IRQHandler */
+#define RCC_CRS_IRQHandler RCC_IRQHandler
+#define DMA1_Channel4_5_6_7_IRQHandler DMA1_Channel4_5_IRQHandler
+#define ADC1_COMP_IRQHandler ADC1_IRQHandler
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F038xx_H */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/include/devices/stm32f042x6.h b/f0/include/devices/stm32f042x6.h
new file mode 100755
index 0000000000000000000000000000000000000000..07a8ab40c9f17c04cc5beffee0a70dcf2d209880
--- /dev/null
+++ b/f0/include/devices/stm32f042x6.h
@@ -0,0 +1,5275 @@
+/**
+ ******************************************************************************
+ * @file stm32f042x6.h
+ * @author MCD Application Team
+ * @version V2.2.1
+ * @date 09-January-2015
+ * @brief CMSIS STM32F042x4/STM32F042x6 Devices Peripheral Access Layer Header File.
+ *
+ * This file contains:
+ * - Data structures and the address mapping for all peripherals
+ * - Peripheral's registers declarations and bits definition
+ * - Macros to access peripheral’s registers hardware
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS_Device
+ * @{
+ */
+
+/** @addtogroup stm32f042x6
+ * @{
+ */
+
+#ifndef __STM32F042x6_H
+#define __STM32F042x6_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+
+/**
+ * @brief Configuration of the Cortex-M0 Processor and Core Peripherals
+ */
+#define __CM0_REV 0 /*!< Core Revision r0p0 */
+#define __MPU_PRESENT 0 /*!< STM32F0xx do not provide MPU */
+#define __NVIC_PRIO_BITS 2 /*!< STM32F0xx uses 2 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F042x4/STM32F042x6 device Interrupt Number Definition
+ */
+typedef enum
+{
+/****** Cortex-M0 Processor Exceptions Numbers **************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */
+ SVC_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */
+
+/****** STM32F042x4/STM32F042x6 specific Interrupt Numbers **************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ PVD_VDDIO2_IRQn = 1, /*!< PVD & VDDIO2 Interrupts through EXTI Lines 16 and 31 */
+ RTC_IRQn = 2, /*!< RTC Interrupt through EXTI Lines 17, 19 and 20 */
+ FLASH_IRQn = 3, /*!< FLASH global Interrupt */
+ RCC_CRS_IRQn = 4, /*!< RCC & CRS Global Interrupts */
+ EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupts */
+ EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupts */
+ EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupts */
+ TSC_IRQn = 8, /*!< Touch Sensing Controller Interrupts */
+ DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */
+ DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupts */
+ DMA1_Channel4_5_IRQn = 11, /*!< DMA1 Channel 4 and Channel 5 Interrupts */
+ ADC1_IRQn = 12, /*!< ADC1 Interrupt */
+ TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupts */
+ TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 15, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 16, /*!< TIM3 global Interrupt */
+ TIM14_IRQn = 19, /*!< TIM14 global Interrupt */
+ TIM16_IRQn = 21, /*!< TIM16 global Interrupt */
+ TIM17_IRQn = 22, /*!< TIM17 global Interrupt */
+ I2C1_IRQn = 23, /*!< I2C1 Event Interrupt & EXTI Line23 Interrupt (I2C1 wakeup) */
+ SPI1_IRQn = 25, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 26, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 27, /*!< USART1 global Interrupt & EXTI Line25 Interrupt (USART1 wakeup) */
+ USART2_IRQn = 28, /*!< USART2 global Interrupt */
+ CEC_CAN_IRQn = 30, /*!< CEC and CAN global Interrupts & EXTI Line27 Interrupt */
+ USB_IRQn = 31 /*!< USB global Interrupts & EXTI Line18 Interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm0.h" /* Cortex-M0 processor and core peripherals */
+#include "system_stm32f0xx.h" /* STM32F0xx System Header */
+#include <stdint.h>
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< ADC Interrupt and Status register, Address offset:0x00 */
+ __IO uint32_t IER; /*!< ADC Interrupt Enable register, Address offset:0x04 */
+ __IO uint32_t CR; /*!< ADC Control register, Address offset:0x08 */
+ __IO uint32_t CFGR1; /*!< ADC Configuration register 1, Address offset:0x0C */
+ __IO uint32_t CFGR2; /*!< ADC Configuration register 2, Address offset:0x10 */
+ __IO uint32_t SMPR; /*!< ADC Sampling time register, Address offset:0x14 */
+ uint32_t RESERVED1; /*!< Reserved, 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, 0x1C */
+ __IO uint32_t TR; /*!< ADC watchdog threshold register, Address offset:0x20 */
+ uint32_t RESERVED3; /*!< Reserved, 0x24 */
+ __IO uint32_t CHSELR; /*!< ADC channel selection register, Address offset:0x28 */
+ uint32_t RESERVED4[5]; /*!< Reserved, 0x2C */
+ __IO uint32_t DR; /*!< ADC data register, Address offset:0x40 */
+}ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CCR;
+}ADC_Common_TypeDef;
+
+/**
+ * @brief Controller Area Network TxMailBox
+ */
+typedef struct
+{
+ __IO uint32_t TIR; /*!< CAN TX mailbox identifier register */
+ __IO uint32_t TDTR; /*!< CAN mailbox data length control and time stamp register */
+ __IO uint32_t TDLR; /*!< CAN mailbox data low register */
+ __IO uint32_t TDHR; /*!< CAN mailbox data high register */
+}CAN_TxMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FIFOMailBox
+ */
+typedef struct
+{
+ __IO uint32_t RIR; /*!< CAN receive FIFO mailbox identifier register */
+ __IO uint32_t RDTR; /*!< CAN receive FIFO mailbox data length control and time stamp register */
+ __IO uint32_t RDLR; /*!< CAN receive FIFO mailbox data low register */
+ __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */
+}CAN_FIFOMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FilterRegister
+ */
+typedef struct
+{
+ __IO uint32_t FR1; /*!< CAN Filter bank register 1 */
+ __IO uint32_t FR2; /*!< CAN Filter bank register 1 */
+}CAN_FilterRegister_TypeDef;
+
+/**
+ * @brief Controller Area Network
+ */
+typedef struct
+{
+ __IO uint32_t MCR; /*!< CAN master control register, Address offset: 0x00 */
+ __IO uint32_t MSR; /*!< CAN master status register, Address offset: 0x04 */
+ __IO uint32_t TSR; /*!< CAN transmit status register, Address offset: 0x08 */
+ __IO uint32_t RF0R; /*!< CAN receive FIFO 0 register, Address offset: 0x0C */
+ __IO uint32_t RF1R; /*!< CAN receive FIFO 1 register, Address offset: 0x10 */
+ __IO uint32_t IER; /*!< CAN interrupt enable register, Address offset: 0x14 */
+ __IO uint32_t ESR; /*!< CAN error status register, Address offset: 0x18 */
+ __IO uint32_t BTR; /*!< CAN bit timing register, Address offset: 0x1C */
+ uint32_t RESERVED0[88]; /*!< Reserved, 0x020 - 0x17F */
+ CAN_TxMailBox_TypeDef sTxMailBox[3]; /*!< CAN Tx MailBox, Address offset: 0x180 - 0x1AC */
+ CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; /*!< CAN FIFO MailBox, Address offset: 0x1B0 - 0x1CC */
+ uint32_t RESERVED1[12]; /*!< Reserved, 0x1D0 - 0x1FF */
+ __IO uint32_t FMR; /*!< CAN filter master register, Address offset: 0x200 */
+ __IO uint32_t FM1R; /*!< CAN filter mode register, Address offset: 0x204 */
+ uint32_t RESERVED2; /*!< Reserved, 0x208 */
+ __IO uint32_t FS1R; /*!< CAN filter scale register, Address offset: 0x20C */
+ uint32_t RESERVED3; /*!< Reserved, 0x210 */
+ __IO uint32_t FFA1R; /*!< CAN filter FIFO assignment register, Address offset: 0x214 */
+ uint32_t RESERVED4; /*!< Reserved, 0x218 */
+ __IO uint32_t FA1R; /*!< CAN filter activation register, Address offset: 0x21C */
+ uint32_t RESERVED5[8]; /*!< Reserved, 0x220-0x23F */
+ CAN_FilterRegister_TypeDef sFilterRegister[28]; /*!< CAN Filter Register, Address offset: 0x240-0x31C */
+}CAN_TypeDef;
+
+/**
+ * @brief HDMI-CEC
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< CEC control register, Address offset:0x00 */
+ __IO uint32_t CFGR; /*!< CEC configuration register, Address offset:0x04 */
+ __IO uint32_t TXDR; /*!< CEC Tx data register , Address offset:0x08 */
+ __IO uint32_t RXDR; /*!< CEC Rx Data Register, Address offset:0x0C */
+ __IO uint32_t ISR; /*!< CEC Interrupt and Status Register, Address offset:0x10 */
+ __IO uint32_t IER; /*!< CEC interrupt enable register, Address offset:0x14 */
+}CEC_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+ uint32_t RESERVED2; /*!< Reserved, 0x0C */
+ __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */
+ __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */
+}CRC_TypeDef;
+
+/**
+ * @brief Clock Recovery System
+ */
+typedef struct
+{
+__IO uint32_t CR; /*!< CRS ccontrol register, Address offset: 0x00 */
+__IO uint32_t CFGR; /*!< CRS configuration register, Address offset: 0x04 */
+__IO uint32_t ISR; /*!< CRS interrupt and status register, Address offset: 0x08 */
+__IO uint32_t ICR; /*!< CRS interrupt flag clear register, Address offset: 0x0C */
+}CRS_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< DMA channel x configuration register */
+ __IO uint32_t CNDTR; /*!< DMA channel x number of data register */
+ __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */
+ __IO uint32_t CMAR; /*!< DMA channel x memory address register */
+}DMA_Channel_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */
+ __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */
+}DMA_TypeDef;
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!<EXTI Interrupt mask register, Address offset: 0x00 */
+ __IO uint32_t EMR; /*!<EXTI Event mask register, Address offset: 0x04 */
+ __IO uint32_t RTSR; /*!<EXTI Rising trigger selection register , Address offset: 0x08 */
+ __IO uint32_t FTSR; /*!<EXTI Falling trigger selection register, Address offset: 0x0C */
+ __IO uint32_t SWIER; /*!<EXTI Software interrupt event register, Address offset: 0x10 */
+ __IO uint32_t PR; /*!<EXTI Pending register, Address offset: 0x14 */
+}EXTI_TypeDef;
+
+/**
+ * @brief FLASH Registers
+ */
+typedef struct
+{
+ __IO uint32_t ACR; /*!<FLASH access control register, Address offset: 0x00 */
+ __IO uint32_t KEYR; /*!<FLASH key register, Address offset: 0x04 */
+ __IO uint32_t OPTKEYR; /*!<FLASH OPT key register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!<FLASH status register, Address offset: 0x0C */
+ __IO uint32_t CR; /*!<FLASH control register, Address offset: 0x10 */
+ __IO uint32_t AR; /*!<FLASH address register, Address offset: 0x14 */
+ __IO uint32_t RESERVED; /*!< Reserved, 0x18 */
+ __IO uint32_t OBR; /*!<FLASH option bytes register, Address offset: 0x1C */
+ __IO uint32_t WRPR; /*!<FLASH option bytes register, Address offset: 0x20 */
+}FLASH_TypeDef;
+
+
+/**
+ * @brief Option Bytes Registers
+ */
+typedef struct
+{
+ __IO uint16_t RDP; /*!< FLASH option byte Read protection, Address offset: 0x00 */
+ __IO uint16_t USER; /*!< FLASH option byte user options, Address offset: 0x02 */
+ __IO uint16_t DATA0; /*!< User data byte 0 (stored in FLASH_OBR[23:16]), Address offset: 0x04 */
+ __IO uint16_t DATA1; /*!< User data byte 1 (stored in FLASH_OBR[31:24]), Address offset: 0x06 */
+ __IO uint16_t WRP0; /*!< FLASH option byte write protection 0, Address offset: 0x08 */
+ __IO uint16_t WRP1; /*!< FLASH option byte write protection 1, Address offset: 0x0A */
+ __IO uint16_t WRP2; /*!< FLASH option byte write protection 2, Address offset: 0x0C */
+ __IO uint16_t WRP3; /*!< FLASH option byte write protection 3, Address offset: 0x0E */
+}OB_TypeDef;
+
+/**
+ * @brief General Purpose I/O
+ */
+
+typedef struct
+{
+ __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */
+ __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */
+ __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */
+ __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */
+ __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */
+ __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */
+ __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x1A */
+ __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */
+ __IO uint32_t AFR[2]; /*!< GPIO alternate function low register, Address offset: 0x20-0x24 */
+ __IO uint32_t BRR; /*!< GPIO bit reset register, Address offset: 0x28 */
+}GPIO_TypeDef;
+
+/**
+ * @brief SysTem Configuration
+ */
+
+typedef struct
+{
+ __IO uint32_t CFGR1; /*!< SYSCFG configuration register 1, Address offset: 0x00 */
+ uint32_t RESERVED; /*!< Reserved, 0x04 */
+ __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration register, Address offset: 0x14-0x08 */
+ __IO uint32_t CFGR2; /*!< SYSCFG configuration register 2, Address offset: 0x18 */
+}SYSCFG_TypeDef;
+
+/**
+ * @brief Inter-integrated Circuit Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */
+ __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */
+ __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */
+ __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */
+ __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */
+ __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */
+ __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */
+ __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */
+ __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */
+ __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */
+}I2C_TypeDef;
+
+/**
+ * @brief Independent WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */
+ __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */
+ __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */
+ __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */
+}IWDG_TypeDef;
+
+/**
+ * @brief Power Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< PWR power control register, Address offset: 0x00 */
+ __IO uint32_t CSR; /*!< PWR power control/status register, Address offset: 0x04 */
+}PWR_TypeDef;
+
+/**
+ * @brief Reset and Clock Control
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */
+ __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x04 */
+ __IO uint32_t CIR; /*!< RCC clock interrupt register, Address offset: 0x08 */
+ __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x0C */
+ __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x10 */
+ __IO uint32_t AHBENR; /*!< RCC AHB peripheral clock register, Address offset: 0x14 */
+ __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x18 */
+ __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x1C */
+ __IO uint32_t BDCR; /*!< RCC Backup domain control register, Address offset: 0x20 */
+ __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x24 */
+ __IO uint32_t AHBRSTR; /*!< RCC AHB peripheral reset register, Address offset: 0x28 */
+ __IO uint32_t CFGR2; /*!< RCC clock configuration register 2, Address offset: 0x2C */
+ __IO uint32_t CFGR3; /*!< RCC clock configuration register 3, Address offset: 0x30 */
+ __IO uint32_t CR2; /*!< RCC clock control register 2, Address offset: 0x34 */
+}RCC_TypeDef;
+
+/**
+ * @brief Real-Time Clock
+ */
+
+typedef struct
+{
+ __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */
+ __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */
+ uint32_t RESERVED1; /*!< Reserved, Address offset: 0x14 */
+ uint32_t RESERVED2; /*!< Reserved, Address offset: 0x18 */
+ __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */
+ uint32_t RESERVED3; /*!< Reserved, Address offset: 0x20 */
+ __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */
+ __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */
+ __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */
+ __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */
+ __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */
+ __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */
+ __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */
+ __IO uint32_t TAFCR; /*!< RTC tamper and alternate function configuration register, Address offset: 0x40 */
+ __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */
+ uint32_t RESERVED4; /*!< Reserved, Address offset: 0x48 */
+ uint32_t RESERVED5; /*!< Reserved, Address offset: 0x4C */
+ __IO uint32_t BKP0R; /*!< RTC backup register 0, Address offset: 0x50 */
+ __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */
+ __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */
+ __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */
+ __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */
+}RTC_TypeDef;
+
+/**
+ * @brief Serial Peripheral Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< SPI Control register 1 (not used in I2S mode), Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */
+ __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */
+ __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */
+ __IO uint32_t RXCRCR; /*!< SPI Rx CRC register (not used in I2S mode), Address offset: 0x14 */
+ __IO uint32_t TXCRCR; /*!< SPI Tx CRC register (not used in I2S mode), Address offset: 0x18 */
+ __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */
+ __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */
+}SPI_TypeDef;
+
+/**
+ * @brief TIM
+ */
+typedef struct
+{
+ __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */
+ __IO uint32_t SMCR; /*!< TIM slave Mode Control register, Address offset: 0x08 */
+ __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */
+ __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */
+ __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */
+ __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */
+ __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */
+ __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */
+ __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */
+ __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */
+ __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */
+ __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */
+ __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */
+ __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */
+ __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */
+ __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */
+ __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */
+ __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */
+ __IO uint32_t DMAR; /*!< TIM DMA address for full transfer register, Address offset: 0x4C */
+ __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */
+}TIM_TypeDef;
+
+/**
+ * @brief Touch Sensing Controller (TSC)
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< TSC control register, Address offset: 0x00 */
+ __IO uint32_t IER; /*!< TSC interrupt enable register, Address offset: 0x04 */
+ __IO uint32_t ICR; /*!< TSC interrupt clear register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< TSC interrupt status register, Address offset: 0x0C */
+ __IO uint32_t IOHCR; /*!< TSC I/O hysteresis control register, Address offset: 0x10 */
+ uint32_t RESERVED1; /*!< Reserved, Address offset: 0x14 */
+ __IO uint32_t IOASCR; /*!< TSC I/O analog switch control register, Address offset: 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, Address offset: 0x1C */
+ __IO uint32_t IOSCR; /*!< TSC I/O sampling control register, Address offset: 0x20 */
+ uint32_t RESERVED3; /*!< Reserved, Address offset: 0x24 */
+ __IO uint32_t IOCCR; /*!< TSC I/O channel control register, Address offset: 0x28 */
+ uint32_t RESERVED4; /*!< Reserved, Address offset: 0x2C */
+ __IO uint32_t IOGCSR; /*!< TSC I/O group control status register, Address offset: 0x30 */
+ __IO uint32_t IOGXCR[8]; /*!< TSC I/O group x counter register, Address offset: 0x34-50 */
+}TSC_TypeDef;
+
+/**
+ * @brief Universal Synchronous Asynchronous Receiver Transmitter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */
+ __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */
+ __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */
+ __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */
+ __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */
+ __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */
+ __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */
+ __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */
+ __IO uint16_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */
+ uint16_t RESERVED1; /*!< Reserved, 0x26 */
+ __IO uint16_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */
+ uint16_t RESERVED2; /*!< Reserved, 0x2A */
+}USART_TypeDef;
+
+/**
+ * @brief Universal Serial Bus Full Speed Device
+ */
+
+typedef struct
+{
+ __IO uint16_t EP0R; /*!< USB Endpoint 0 register, Address offset: 0x00 */
+ __IO uint16_t RESERVED0; /*!< Reserved */
+ __IO uint16_t EP1R; /*!< USB Endpoint 1 register, Address offset: 0x04 */
+ __IO uint16_t RESERVED1; /*!< Reserved */
+ __IO uint16_t EP2R; /*!< USB Endpoint 2 register, Address offset: 0x08 */
+ __IO uint16_t RESERVED2; /*!< Reserved */
+ __IO uint16_t EP3R; /*!< USB Endpoint 3 register, Address offset: 0x0C */
+ __IO uint16_t RESERVED3; /*!< Reserved */
+ __IO uint16_t EP4R; /*!< USB Endpoint 4 register, Address offset: 0x10 */
+ __IO uint16_t RESERVED4; /*!< Reserved */
+ __IO uint16_t EP5R; /*!< USB Endpoint 5 register, Address offset: 0x14 */
+ __IO uint16_t RESERVED5; /*!< Reserved */
+ __IO uint16_t EP6R; /*!< USB Endpoint 6 register, Address offset: 0x18 */
+ __IO uint16_t RESERVED6; /*!< Reserved */
+ __IO uint16_t EP7R; /*!< USB Endpoint 7 register, Address offset: 0x1C */
+ __IO uint16_t RESERVED7[17]; /*!< Reserved */
+ __IO uint16_t CNTR; /*!< Control register, Address offset: 0x40 */
+ __IO uint16_t RESERVED8; /*!< Reserved */
+ __IO uint16_t ISTR; /*!< Interrupt status register, Address offset: 0x44 */
+ __IO uint16_t RESERVED9; /*!< Reserved */
+ __IO uint16_t FNR; /*!< Frame number register, Address offset: 0x48 */
+ __IO uint16_t RESERVEDA; /*!< Reserved */
+ __IO uint16_t DADDR; /*!< Device address register, Address offset: 0x4C */
+ __IO uint16_t RESERVEDB; /*!< Reserved */
+ __IO uint16_t BTABLE; /*!< Buffer Table address register, Address offset: 0x50 */
+ __IO uint16_t RESERVEDC; /*!< Reserved */
+ __IO uint16_t LPMCSR; /*!< LPM Control and Status register, Address offset: 0x54 */
+ __IO uint16_t RESERVEDD; /*!< Reserved */
+ __IO uint16_t BCDR; /*!< Battery Charging detector register, Address offset: 0x58 */
+ __IO uint16_t RESERVEDE; /*!< Reserved */
+}USB_TypeDef;
+
+/**
+ * @brief Window WATCHDOG
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */
+ __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */
+}WWDG_TypeDef;
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_memory_map
+ * @{
+ */
+
+#define FLASH_BASE ((uint32_t)0x08000000) /*!< FLASH base address in the alias region */
+#define SRAM_BASE ((uint32_t)0x20000000) /*!< SRAM base address in the alias region */
+#define PERIPH_BASE ((uint32_t)0x40000000) /*!< Peripheral base address in the alias region */
+
+/*!< Peripheral memory map */
+#define APBPERIPH_BASE PERIPH_BASE
+#define AHBPERIPH_BASE (PERIPH_BASE + 0x00020000)
+#define AHB2PERIPH_BASE (PERIPH_BASE + 0x08000000)
+
+#define TIM2_BASE (APBPERIPH_BASE + 0x00000000)
+#define TIM3_BASE (APBPERIPH_BASE + 0x00000400)
+#define TIM14_BASE (APBPERIPH_BASE + 0x00002000)
+#define RTC_BASE (APBPERIPH_BASE + 0x00002800)
+#define WWDG_BASE (APBPERIPH_BASE + 0x00002C00)
+#define IWDG_BASE (APBPERIPH_BASE + 0x00003000)
+#define SPI2_BASE (APBPERIPH_BASE + 0x00003800)
+#define USART2_BASE (APBPERIPH_BASE + 0x00004400)
+#define I2C1_BASE (APBPERIPH_BASE + 0x00005400)
+#define USB_BASE (APBPERIPH_BASE + 0x00005C00) /*!< USB_IP Peripheral Registers base address */
+#define USB_PMAADDR (APBPERIPH_BASE + 0x00006000) /*!< USB_IP Packet Memory Area base address */
+#define CAN_BASE (APBPERIPH_BASE + 0x00006400)
+#define CRS_BASE (APBPERIPH_BASE + 0x00006C00)
+#define PWR_BASE (APBPERIPH_BASE + 0x00007000)
+#define CEC_BASE (APBPERIPH_BASE + 0x00007800)
+
+#define SYSCFG_BASE (APBPERIPH_BASE + 0x00010000)
+#define EXTI_BASE (APBPERIPH_BASE + 0x00010400)
+#define ADC1_BASE (APBPERIPH_BASE + 0x00012400)
+#define ADC_BASE (APBPERIPH_BASE + 0x00012708)
+#define TIM1_BASE (APBPERIPH_BASE + 0x00012C00)
+#define SPI1_BASE (APBPERIPH_BASE + 0x00013000)
+#define USART1_BASE (APBPERIPH_BASE + 0x00013800)
+#define TIM16_BASE (APBPERIPH_BASE + 0x00014400)
+#define TIM17_BASE (APBPERIPH_BASE + 0x00014800)
+#define DBGMCU_BASE (APBPERIPH_BASE + 0x00015800)
+
+#define DMA1_BASE (AHBPERIPH_BASE + 0x00000000)
+#define DMA1_Channel1_BASE (DMA1_BASE + 0x00000008)
+#define DMA1_Channel2_BASE (DMA1_BASE + 0x0000001C)
+#define DMA1_Channel3_BASE (DMA1_BASE + 0x00000030)
+#define DMA1_Channel4_BASE (DMA1_BASE + 0x00000044)
+#define DMA1_Channel5_BASE (DMA1_BASE + 0x00000058)
+#define DMA1_Channel6_BASE (DMA1_BASE + 0x0000006C)
+#define DMA1_Channel7_BASE (DMA1_BASE + 0x00000080)
+
+#define RCC_BASE (AHBPERIPH_BASE + 0x00001000)
+#define FLASH_R_BASE (AHBPERIPH_BASE + 0x00002000) /*!< FLASH registers base address */
+#define OB_BASE ((uint32_t)0x1FFFF800) /*!< FLASH Option Bytes base address */
+#define CRC_BASE (AHBPERIPH_BASE + 0x00003000)
+#define TSC_BASE (AHBPERIPH_BASE + 0x00004000)
+
+#define GPIOA_BASE (AHB2PERIPH_BASE + 0x00000000)
+#define GPIOB_BASE (AHB2PERIPH_BASE + 0x00000400)
+#define GPIOC_BASE (AHB2PERIPH_BASE + 0x00000800)
+#define GPIOF_BASE (AHB2PERIPH_BASE + 0x00001400)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_declaration
+ * @{
+ */
+
+#define TIM2 ((TIM_TypeDef *) TIM2_BASE)
+#define TIM3 ((TIM_TypeDef *) TIM3_BASE)
+#define TIM14 ((TIM_TypeDef *) TIM14_BASE)
+#define RTC ((RTC_TypeDef *) RTC_BASE)
+#define WWDG ((WWDG_TypeDef *) WWDG_BASE)
+#define IWDG ((IWDG_TypeDef *) IWDG_BASE)
+#define USART2 ((USART_TypeDef *) USART2_BASE)
+#define I2C1 ((I2C_TypeDef *) I2C1_BASE)
+#define CAN ((CAN_TypeDef *) CAN_BASE)
+#define CRS ((CRS_TypeDef *) CRS_BASE)
+#define PWR ((PWR_TypeDef *) PWR_BASE)
+#define CEC ((CEC_TypeDef *) CEC_BASE)
+#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE)
+#define EXTI ((EXTI_TypeDef *) EXTI_BASE)
+#define ADC1 ((ADC_TypeDef *) ADC1_BASE)
+#define ADC ((ADC_Common_TypeDef *) ADC_BASE)
+#define TIM1 ((TIM_TypeDef *) TIM1_BASE)
+#define SPI1 ((SPI_TypeDef *) SPI1_BASE)
+#define SPI2 ((SPI_TypeDef *) SPI2_BASE)
+#define USART1 ((USART_TypeDef *) USART1_BASE)
+#define TIM16 ((TIM_TypeDef *) TIM16_BASE)
+#define TIM17 ((TIM_TypeDef *) TIM17_BASE)
+#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE)
+#define DMA1 ((DMA_TypeDef *) DMA1_BASE)
+#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE)
+#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE)
+#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE)
+#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE)
+#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE)
+#define DMA1_Channel6 ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE)
+#define DMA1_Channel7 ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE)
+#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE)
+#define OB ((OB_TypeDef *) OB_BASE)
+#define RCC ((RCC_TypeDef *) RCC_BASE)
+#define CRC ((CRC_TypeDef *) CRC_BASE)
+#define TSC ((TSC_TypeDef *) TSC_BASE)
+#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE)
+#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE)
+#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE)
+#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE)
+#define USB ((USB_TypeDef *) USB_BASE)
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_constants
+ * @{
+ */
+
+ /** @addtogroup Peripheral_Registers_Bits_Definition
+ * @{
+ */
+
+/******************************************************************************/
+/* Peripheral Registers Bits Definition */
+/******************************************************************************/
+/******************************************************************************/
+/* */
+/* Analog to Digital Converter (ADC) */
+/* */
+/******************************************************************************/
+/******************** Bits definition for ADC_ISR register ******************/
+#define ADC_ISR_AWD ((uint32_t)0x00000080) /*!< Analog watchdog flag */
+#define ADC_ISR_OVR ((uint32_t)0x00000010) /*!< Overrun flag */
+#define ADC_ISR_EOSEQ ((uint32_t)0x00000008) /*!< End of Sequence flag */
+#define ADC_ISR_EOC ((uint32_t)0x00000004) /*!< End of Conversion */
+#define ADC_ISR_EOSMP ((uint32_t)0x00000002) /*!< End of sampling flag */
+#define ADC_ISR_ADRDY ((uint32_t)0x00000001) /*!< ADC Ready */
+
+/* Old EOSEQ bit definition, maintained for legacy purpose */
+#define ADC_ISR_EOS ADC_ISR_EOSEQ
+
+/******************** Bits definition for ADC_IER register ******************/
+#define ADC_IER_AWDIE ((uint32_t)0x00000080) /*!< Analog Watchdog interrupt enable */
+#define ADC_IER_OVRIE ((uint32_t)0x00000010) /*!< Overrun interrupt enable */
+#define ADC_IER_EOSEQIE ((uint32_t)0x00000008) /*!< End of Sequence of conversion interrupt enable */
+#define ADC_IER_EOCIE ((uint32_t)0x00000004) /*!< End of Conversion interrupt enable */
+#define ADC_IER_EOSMPIE ((uint32_t)0x00000002) /*!< End of sampling interrupt enable */
+#define ADC_IER_ADRDYIE ((uint32_t)0x00000001) /*!< ADC Ready interrupt enable */
+
+/* Old EOSEQIE bit definition, maintained for legacy purpose */
+#define ADC_IER_EOSIE ADC_IER_EOSEQIE
+
+/******************** Bits definition for ADC_CR register *******************/
+#define ADC_CR_ADCAL ((uint32_t)0x80000000) /*!< ADC calibration */
+#define ADC_CR_ADSTP ((uint32_t)0x00000010) /*!< ADC stop of conversion command */
+#define ADC_CR_ADSTART ((uint32_t)0x00000004) /*!< ADC start of conversion */
+#define ADC_CR_ADDIS ((uint32_t)0x00000002) /*!< ADC disable command */
+#define ADC_CR_ADEN ((uint32_t)0x00000001) /*!< ADC enable control */
+
+/******************* Bits definition for ADC_CFGR1 register *****************/
+#define ADC_CFGR1_AWDCH ((uint32_t)0x7C000000) /*!< AWDCH[4:0] bits (Analog watchdog channel select bits) */
+#define ADC_CFGR1_AWDCH_0 ((uint32_t)0x04000000) /*!< Bit 0 */
+#define ADC_CFGR1_AWDCH_1 ((uint32_t)0x08000000) /*!< Bit 1 */
+#define ADC_CFGR1_AWDCH_2 ((uint32_t)0x10000000) /*!< Bit 2 */
+#define ADC_CFGR1_AWDCH_3 ((uint32_t)0x20000000) /*!< Bit 3 */
+#define ADC_CFGR1_AWDCH_4 ((uint32_t)0x40000000) /*!< Bit 4 */
+#define ADC_CFGR1_AWDEN ((uint32_t)0x00800000) /*!< Analog watchdog enable on regular channels */
+#define ADC_CFGR1_AWDSGL ((uint32_t)0x00400000) /*!< Enable the watchdog on a single channel or on all channels */
+#define ADC_CFGR1_DISCEN ((uint32_t)0x00010000) /*!< Discontinuous mode on regular channels */
+#define ADC_CFGR1_AUTOFF ((uint32_t)0x00008000) /*!< ADC auto power off */
+#define ADC_CFGR1_WAIT ((uint32_t)0x00004000) /*!< ADC wait conversion mode */
+#define ADC_CFGR1_CONT ((uint32_t)0x00002000) /*!< Continuous Conversion */
+#define ADC_CFGR1_OVRMOD ((uint32_t)0x00001000) /*!< Overrun mode */
+#define ADC_CFGR1_EXTEN ((uint32_t)0x00000C00) /*!< EXTEN[1:0] bits (External Trigger Conversion mode for regular channels) */
+#define ADC_CFGR1_EXTEN_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define ADC_CFGR1_EXTEN_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define ADC_CFGR1_EXTSEL ((uint32_t)0x000001C0) /*!< EXTSEL[2:0] bits (External Event Select for regular group) */
+#define ADC_CFGR1_EXTSEL_0 ((uint32_t)0x00000040) /*!< Bit 0 */
+#define ADC_CFGR1_EXTSEL_1 ((uint32_t)0x00000080) /*!< Bit 1 */
+#define ADC_CFGR1_EXTSEL_2 ((uint32_t)0x00000100) /*!< Bit 2 */
+#define ADC_CFGR1_ALIGN ((uint32_t)0x00000020) /*!< Data Alignment */
+#define ADC_CFGR1_RES ((uint32_t)0x00000018) /*!< RES[1:0] bits (Resolution) */
+#define ADC_CFGR1_RES_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define ADC_CFGR1_RES_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define ADC_CFGR1_SCANDIR ((uint32_t)0x00000004) /*!< Sequence scan direction */
+#define ADC_CFGR1_DMACFG ((uint32_t)0x00000002) /*!< Direct memory access configuration */
+#define ADC_CFGR1_DMAEN ((uint32_t)0x00000001) /*!< Direct memory access enable */
+
+/* Old WAIT bit definition, maintained for legacy purpose */
+#define ADC_CFGR1_AUTDLY ADC_CFGR1_WAIT
+
+/******************* Bits definition for ADC_CFGR2 register *****************/
+#define ADC_CFGR2_CKMODE ((uint32_t)0xC0000000) /*!< ADC clock mode */
+#define ADC_CFGR2_CKMODE_1 ((uint32_t)0x80000000) /*!< ADC clocked by PCLK div4 */
+#define ADC_CFGR2_CKMODE_0 ((uint32_t)0x40000000) /*!< ADC clocked by PCLK div2 */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_CFGR2_JITOFFDIV4 ADC_CFGR2_CKMODE_1 /*!< ADC clocked by PCLK div4 */
+#define ADC_CFGR2_JITOFFDIV2 ADC_CFGR2_CKMODE_0 /*!< ADC clocked by PCLK div2 */
+
+/****************** Bit definition for ADC_SMPR register ********************/
+#define ADC_SMPR_SMP ((uint32_t)0x00000007) /*!< SMP[2:0] bits (Sampling time selection) */
+#define ADC_SMPR_SMP_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define ADC_SMPR_SMP_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define ADC_SMPR_SMP_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_SMPR1_SMPR ADC_SMPR_SMP /*!< SMP[2:0] bits (Sampling time selection) */
+#define ADC_SMPR1_SMPR_0 ADC_SMPR_SMP_0 /*!< Bit 0 */
+#define ADC_SMPR1_SMPR_1 ADC_SMPR_SMP_1 /*!< Bit 1 */
+#define ADC_SMPR1_SMPR_2 ADC_SMPR_SMP_2 /*!< Bit 2 */
+
+/******************* Bit definition for ADC_TR register ********************/
+#define ADC_TR_HT ((uint32_t)0x0FFF0000) /*!< Analog watchdog high threshold */
+#define ADC_TR_LT ((uint32_t)0x00000FFF) /*!< Analog watchdog low threshold */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_HTR_HT ADC_TR_HT /*!< Analog watchdog high threshold */
+#define ADC_LTR_LT ADC_TR_LT /*!< Analog watchdog low threshold */
+
+/****************** Bit definition for ADC_CHSELR register ******************/
+#define ADC_CHSELR_CHSEL18 ((uint32_t)0x00040000) /*!< Channel 18 selection */
+#define ADC_CHSELR_CHSEL17 ((uint32_t)0x00020000) /*!< Channel 17 selection */
+#define ADC_CHSELR_CHSEL16 ((uint32_t)0x00010000) /*!< Channel 16 selection */
+#define ADC_CHSELR_CHSEL15 ((uint32_t)0x00008000) /*!< Channel 15 selection */
+#define ADC_CHSELR_CHSEL14 ((uint32_t)0x00004000) /*!< Channel 14 selection */
+#define ADC_CHSELR_CHSEL13 ((uint32_t)0x00002000) /*!< Channel 13 selection */
+#define ADC_CHSELR_CHSEL12 ((uint32_t)0x00001000) /*!< Channel 12 selection */
+#define ADC_CHSELR_CHSEL11 ((uint32_t)0x00000800) /*!< Channel 11 selection */
+#define ADC_CHSELR_CHSEL10 ((uint32_t)0x00000400) /*!< Channel 10 selection */
+#define ADC_CHSELR_CHSEL9 ((uint32_t)0x00000200) /*!< Channel 9 selection */
+#define ADC_CHSELR_CHSEL8 ((uint32_t)0x00000100) /*!< Channel 8 selection */
+#define ADC_CHSELR_CHSEL7 ((uint32_t)0x00000080) /*!< Channel 7 selection */
+#define ADC_CHSELR_CHSEL6 ((uint32_t)0x00000040) /*!< Channel 6 selection */
+#define ADC_CHSELR_CHSEL5 ((uint32_t)0x00000020) /*!< Channel 5 selection */
+#define ADC_CHSELR_CHSEL4 ((uint32_t)0x00000010) /*!< Channel 4 selection */
+#define ADC_CHSELR_CHSEL3 ((uint32_t)0x00000008) /*!< Channel 3 selection */
+#define ADC_CHSELR_CHSEL2 ((uint32_t)0x00000004) /*!< Channel 2 selection */
+#define ADC_CHSELR_CHSEL1 ((uint32_t)0x00000002) /*!< Channel 1 selection */
+#define ADC_CHSELR_CHSEL0 ((uint32_t)0x00000001) /*!< Channel 0 selection */
+
+/******************** Bit definition for ADC_DR register ********************/
+#define ADC_DR_DATA ((uint32_t)0x0000FFFF) /*!< Regular data */
+
+/******************* Bit definition for ADC_CCR register ********************/
+#define ADC_CCR_VBATEN ((uint32_t)0x01000000) /*!< Voltage battery enable */
+#define ADC_CCR_TSEN ((uint32_t)0x00800000) /*!< Tempurature sensore enable */
+#define ADC_CCR_VREFEN ((uint32_t)0x00400000) /*!< Vrefint enable */
+
+/******************************************************************************/
+/* */
+/* Controller Area Network (CAN ) */
+/* */
+/******************************************************************************/
+/*!<CAN control and status registers */
+/******************* Bit definition for CAN_MCR register ********************/
+#define CAN_MCR_INRQ ((uint32_t)0x00000001) /*!<Initialization Request */
+#define CAN_MCR_SLEEP ((uint32_t)0x00000002) /*!<Sleep Mode Request */
+#define CAN_MCR_TXFP ((uint32_t)0x00000004) /*!<Transmit FIFO Priority */
+#define CAN_MCR_RFLM ((uint32_t)0x00000008) /*!<Receive FIFO Locked Mode */
+#define CAN_MCR_NART ((uint32_t)0x00000010) /*!<No Automatic Retransmission */
+#define CAN_MCR_AWUM ((uint32_t)0x00000020) /*!<Automatic Wakeup Mode */
+#define CAN_MCR_ABOM ((uint32_t)0x00000040) /*!<Automatic Bus-Off Management */
+#define CAN_MCR_TTCM ((uint32_t)0x00000080) /*!<Time Triggered Communication Mode */
+#define CAN_MCR_RESET ((uint32_t)0x00008000) /*!<bxCAN software master reset */
+
+/******************* Bit definition for CAN_MSR register ********************/
+#define CAN_MSR_INAK ((uint32_t)0x00000001) /*!<Initialization Acknowledge */
+#define CAN_MSR_SLAK ((uint32_t)0x00000002) /*!<Sleep Acknowledge */
+#define CAN_MSR_ERRI ((uint32_t)0x00000004) /*!<Error Interrupt */
+#define CAN_MSR_WKUI ((uint32_t)0x00000008) /*!<Wakeup Interrupt */
+#define CAN_MSR_SLAKI ((uint32_t)0x00000010) /*!<Sleep Acknowledge Interrupt */
+#define CAN_MSR_TXM ((uint32_t)0x00000100) /*!<Transmit Mode */
+#define CAN_MSR_RXM ((uint32_t)0x00000200) /*!<Receive Mode */
+#define CAN_MSR_SAMP ((uint32_t)0x00000400) /*!<Last Sample Point */
+#define CAN_MSR_RX ((uint32_t)0x00000800) /*!<CAN Rx Signal */
+
+/******************* Bit definition for CAN_TSR register ********************/
+#define CAN_TSR_RQCP0 ((uint32_t)0x00000001) /*!<Request Completed Mailbox0 */
+#define CAN_TSR_TXOK0 ((uint32_t)0x00000002) /*!<Transmission OK of Mailbox0 */
+#define CAN_TSR_ALST0 ((uint32_t)0x00000004) /*!<Arbitration Lost for Mailbox0 */
+#define CAN_TSR_TERR0 ((uint32_t)0x00000008) /*!<Transmission Error of Mailbox0 */
+#define CAN_TSR_ABRQ0 ((uint32_t)0x00000080) /*!<Abort Request for Mailbox0 */
+#define CAN_TSR_RQCP1 ((uint32_t)0x00000100) /*!<Request Completed Mailbox1 */
+#define CAN_TSR_TXOK1 ((uint32_t)0x00000200) /*!<Transmission OK of Mailbox1 */
+#define CAN_TSR_ALST1 ((uint32_t)0x00000400) /*!<Arbitration Lost for Mailbox1 */
+#define CAN_TSR_TERR1 ((uint32_t)0x00000800) /*!<Transmission Error of Mailbox1 */
+#define CAN_TSR_ABRQ1 ((uint32_t)0x00008000) /*!<Abort Request for Mailbox 1 */
+#define CAN_TSR_RQCP2 ((uint32_t)0x00010000) /*!<Request Completed Mailbox2 */
+#define CAN_TSR_TXOK2 ((uint32_t)0x00020000) /*!<Transmission OK of Mailbox 2 */
+#define CAN_TSR_ALST2 ((uint32_t)0x00040000) /*!<Arbitration Lost for mailbox 2 */
+#define CAN_TSR_TERR2 ((uint32_t)0x00080000) /*!<Transmission Error of Mailbox 2 */
+#define CAN_TSR_ABRQ2 ((uint32_t)0x00800000) /*!<Abort Request for Mailbox 2 */
+#define CAN_TSR_CODE ((uint32_t)0x03000000) /*!<Mailbox Code */
+
+#define CAN_TSR_TME ((uint32_t)0x1C000000) /*!<TME[2:0] bits */
+#define CAN_TSR_TME0 ((uint32_t)0x04000000) /*!<Transmit Mailbox 0 Empty */
+#define CAN_TSR_TME1 ((uint32_t)0x08000000) /*!<Transmit Mailbox 1 Empty */
+#define CAN_TSR_TME2 ((uint32_t)0x10000000) /*!<Transmit Mailbox 2 Empty */
+
+#define CAN_TSR_LOW ((uint32_t)0xE0000000) /*!<LOW[2:0] bits */
+#define CAN_TSR_LOW0 ((uint32_t)0x20000000) /*!<Lowest Priority Flag for Mailbox 0 */
+#define CAN_TSR_LOW1 ((uint32_t)0x40000000) /*!<Lowest Priority Flag for Mailbox 1 */
+#define CAN_TSR_LOW2 ((uint32_t)0x80000000) /*!<Lowest Priority Flag for Mailbox 2 */
+
+/******************* Bit definition for CAN_RF0R register *******************/
+#define CAN_RF0R_FMP0 ((uint32_t)0x00000003) /*!<FIFO 0 Message Pending */
+#define CAN_RF0R_FULL0 ((uint32_t)0x00000008) /*!<FIFO 0 Full */
+#define CAN_RF0R_FOVR0 ((uint32_t)0x00000010) /*!<FIFO 0 Overrun */
+#define CAN_RF0R_RFOM0 ((uint32_t)0x00000020) /*!<Release FIFO 0 Output Mailbox */
+
+/******************* Bit definition for CAN_RF1R register *******************/
+#define CAN_RF1R_FMP1 ((uint32_t)0x00000003) /*!<FIFO 1 Message Pending */
+#define CAN_RF1R_FULL1 ((uint32_t)0x00000008) /*!<FIFO 1 Full */
+#define CAN_RF1R_FOVR1 ((uint32_t)0x00000010) /*!<FIFO 1 Overrun */
+#define CAN_RF1R_RFOM1 ((uint32_t)0x00000020) /*!<Release FIFO 1 Output Mailbox */
+
+/******************** Bit definition for CAN_IER register *******************/
+#define CAN_IER_TMEIE ((uint32_t)0x00000001) /*!<Transmit Mailbox Empty Interrupt Enable */
+#define CAN_IER_FMPIE0 ((uint32_t)0x00000002) /*!<FIFO Message Pending Interrupt Enable */
+#define CAN_IER_FFIE0 ((uint32_t)0x00000004) /*!<FIFO Full Interrupt Enable */
+#define CAN_IER_FOVIE0 ((uint32_t)0x00000008) /*!<FIFO Overrun Interrupt Enable */
+#define CAN_IER_FMPIE1 ((uint32_t)0x00000010) /*!<FIFO Message Pending Interrupt Enable */
+#define CAN_IER_FFIE1 ((uint32_t)0x00000020) /*!<FIFO Full Interrupt Enable */
+#define CAN_IER_FOVIE1 ((uint32_t)0x00000040) /*!<FIFO Overrun Interrupt Enable */
+#define CAN_IER_EWGIE ((uint32_t)0x00000100) /*!<Error Warning Interrupt Enable */
+#define CAN_IER_EPVIE ((uint32_t)0x00000200) /*!<Error Passive Interrupt Enable */
+#define CAN_IER_BOFIE ((uint32_t)0x00000400) /*!<Bus-Off Interrupt Enable */
+#define CAN_IER_LECIE ((uint32_t)0x00000800) /*!<Last Error Code Interrupt Enable */
+#define CAN_IER_ERRIE ((uint32_t)0x00008000) /*!<Error Interrupt Enable */
+#define CAN_IER_WKUIE ((uint32_t)0x00010000) /*!<Wakeup Interrupt Enable */
+#define CAN_IER_SLKIE ((uint32_t)0x00020000) /*!<Sleep Interrupt Enable */
+
+/******************** Bit definition for CAN_ESR register *******************/
+#define CAN_ESR_EWGF ((uint32_t)0x00000001) /*!<Error Warning Flag */
+#define CAN_ESR_EPVF ((uint32_t)0x00000002) /*!<Error Passive Flag */
+#define CAN_ESR_BOFF ((uint32_t)0x00000004) /*!<Bus-Off Flag */
+
+#define CAN_ESR_LEC ((uint32_t)0x00000070) /*!<LEC[2:0] bits (Last Error Code) */
+#define CAN_ESR_LEC_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define CAN_ESR_LEC_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define CAN_ESR_LEC_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define CAN_ESR_TEC ((uint32_t)0x00FF0000) /*!<Least significant byte of the 9-bit Transmit Error Counter */
+#define CAN_ESR_REC ((uint32_t)0xFF000000) /*!<Receive Error Counter */
+
+/******************* Bit definition for CAN_BTR register ********************/
+#define CAN_BTR_BRP ((uint32_t)0x000003FF) /*!<Baud Rate Prescaler */
+#define CAN_BTR_TS1 ((uint32_t)0x000F0000) /*!<Time Segment 1 */
+#define CAN_BTR_TS1_0 ((uint32_t)0x00010000) /*!<Time Segment 1 (Bit 0) */
+#define CAN_BTR_TS1_1 ((uint32_t)0x00020000) /*!<Time Segment 1 (Bit 1) */
+#define CAN_BTR_TS1_2 ((uint32_t)0x00040000) /*!<Time Segment 1 (Bit 2) */
+#define CAN_BTR_TS1_3 ((uint32_t)0x00080000) /*!<Time Segment 1 (Bit 3) */
+#define CAN_BTR_TS2 ((uint32_t)0x00700000) /*!<Time Segment 2 */
+#define CAN_BTR_TS2_0 ((uint32_t)0x00100000) /*!<Time Segment 2 (Bit 0) */
+#define CAN_BTR_TS2_1 ((uint32_t)0x00200000) /*!<Time Segment 2 (Bit 1) */
+#define CAN_BTR_TS2_2 ((uint32_t)0x00400000) /*!<Time Segment 2 (Bit 2) */
+#define CAN_BTR_SJW ((uint32_t)0x03000000) /*!<Resynchronization Jump Width */
+#define CAN_BTR_SJW_0 ((uint32_t)0x01000000) /*!<Resynchronization Jump Width (Bit 0) */
+#define CAN_BTR_SJW_1 ((uint32_t)0x02000000) /*!<Resynchronization Jump Width (Bit 1) */
+#define CAN_BTR_LBKM ((uint32_t)0x40000000) /*!<Loop Back Mode (Debug) */
+#define CAN_BTR_SILM ((uint32_t)0x80000000) /*!<Silent Mode */
+
+/*!<Mailbox registers */
+/****************** Bit definition for CAN_TI0R register ********************/
+#define CAN_TI0R_TXRQ ((uint32_t)0x00000001) /*!<Transmit Mailbox Request */
+#define CAN_TI0R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_TI0R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_TI0R_EXID ((uint32_t)0x001FFFF8) /*!<Extended Identifier */
+#define CAN_TI0R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/****************** Bit definition for CAN_TDT0R register *******************/
+#define CAN_TDT0R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_TDT0R_TGT ((uint32_t)0x00000100) /*!<Transmit Global Time */
+#define CAN_TDT0R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/****************** Bit definition for CAN_TDL0R register *******************/
+#define CAN_TDL0R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_TDL0R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_TDL0R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_TDL0R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/****************** Bit definition for CAN_TDH0R register *******************/
+#define CAN_TDH0R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_TDH0R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_TDH0R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_TDH0R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/******************* Bit definition for CAN_TI1R register *******************/
+#define CAN_TI1R_TXRQ ((uint32_t)0x00000001) /*!<Transmit Mailbox Request */
+#define CAN_TI1R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_TI1R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_TI1R_EXID ((uint32_t)0x001FFFF8) /*!<Extended Identifier */
+#define CAN_TI1R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/******************* Bit definition for CAN_TDT1R register ******************/
+#define CAN_TDT1R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_TDT1R_TGT ((uint32_t)0x00000100) /*!<Transmit Global Time */
+#define CAN_TDT1R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/******************* Bit definition for CAN_TDL1R register ******************/
+#define CAN_TDL1R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_TDL1R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_TDL1R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_TDL1R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/******************* Bit definition for CAN_TDH1R register ******************/
+#define CAN_TDH1R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_TDH1R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_TDH1R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_TDH1R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/******************* Bit definition for CAN_TI2R register *******************/
+#define CAN_TI2R_TXRQ ((uint32_t)0x00000001) /*!<Transmit Mailbox Request */
+#define CAN_TI2R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_TI2R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_TI2R_EXID ((uint32_t)0x001FFFF8) /*!<Extended identifier */
+#define CAN_TI2R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/******************* Bit definition for CAN_TDT2R register ******************/
+#define CAN_TDT2R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_TDT2R_TGT ((uint32_t)0x00000100) /*!<Transmit Global Time */
+#define CAN_TDT2R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/******************* Bit definition for CAN_TDL2R register ******************/
+#define CAN_TDL2R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_TDL2R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_TDL2R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_TDL2R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/******************* Bit definition for CAN_TDH2R register ******************/
+#define CAN_TDH2R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_TDH2R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_TDH2R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_TDH2R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/******************* Bit definition for CAN_RI0R register *******************/
+#define CAN_RI0R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_RI0R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_RI0R_EXID ((uint32_t)0x001FFFF8) /*!<Extended Identifier */
+#define CAN_RI0R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/******************* Bit definition for CAN_RDT0R register ******************/
+#define CAN_RDT0R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_RDT0R_FMI ((uint32_t)0x0000FF00) /*!<Filter Match Index */
+#define CAN_RDT0R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/******************* Bit definition for CAN_RDL0R register ******************/
+#define CAN_RDL0R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_RDL0R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_RDL0R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_RDL0R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/******************* Bit definition for CAN_RDH0R register ******************/
+#define CAN_RDH0R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_RDH0R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_RDH0R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_RDH0R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/******************* Bit definition for CAN_RI1R register *******************/
+#define CAN_RI1R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_RI1R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_RI1R_EXID ((uint32_t)0x001FFFF8) /*!<Extended identifier */
+#define CAN_RI1R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/******************* Bit definition for CAN_RDT1R register ******************/
+#define CAN_RDT1R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_RDT1R_FMI ((uint32_t)0x0000FF00) /*!<Filter Match Index */
+#define CAN_RDT1R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/******************* Bit definition for CAN_RDL1R register ******************/
+#define CAN_RDL1R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_RDL1R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_RDL1R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_RDL1R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/******************* Bit definition for CAN_RDH1R register ******************/
+#define CAN_RDH1R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_RDH1R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_RDH1R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_RDH1R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/*!<CAN filter registers */
+/******************* Bit definition for CAN_FMR register ********************/
+#define CAN_FMR_FINIT ((uint32_t)0x00000001) /*!<Filter Init Mode */
+
+/******************* Bit definition for CAN_FM1R register *******************/
+#define CAN_FM1R_FBM ((uint32_t)0x00003FFF) /*!<Filter Mode */
+#define CAN_FM1R_FBM0 ((uint32_t)0x00000001) /*!<Filter Init Mode bit 0 */
+#define CAN_FM1R_FBM1 ((uint32_t)0x00000002) /*!<Filter Init Mode bit 1 */
+#define CAN_FM1R_FBM2 ((uint32_t)0x00000004) /*!<Filter Init Mode bit 2 */
+#define CAN_FM1R_FBM3 ((uint32_t)0x00000008) /*!<Filter Init Mode bit 3 */
+#define CAN_FM1R_FBM4 ((uint32_t)0x00000010) /*!<Filter Init Mode bit 4 */
+#define CAN_FM1R_FBM5 ((uint32_t)0x00000020) /*!<Filter Init Mode bit 5 */
+#define CAN_FM1R_FBM6 ((uint32_t)0x00000040) /*!<Filter Init Mode bit 6 */
+#define CAN_FM1R_FBM7 ((uint32_t)0x00000080) /*!<Filter Init Mode bit 7 */
+#define CAN_FM1R_FBM8 ((uint32_t)0x00000100) /*!<Filter Init Mode bit 8 */
+#define CAN_FM1R_FBM9 ((uint32_t)0x00000200) /*!<Filter Init Mode bit 9 */
+#define CAN_FM1R_FBM10 ((uint32_t)0x00000400) /*!<Filter Init Mode bit 10 */
+#define CAN_FM1R_FBM11 ((uint32_t)0x00000800) /*!<Filter Init Mode bit 11 */
+#define CAN_FM1R_FBM12 ((uint32_t)0x00001000) /*!<Filter Init Mode bit 12 */
+#define CAN_FM1R_FBM13 ((uint32_t)0x00002000) /*!<Filter Init Mode bit 13 */
+
+/******************* Bit definition for CAN_FS1R register *******************/
+#define CAN_FS1R_FSC ((uint32_t)0x00003FFF) /*!<Filter Scale Configuration */
+#define CAN_FS1R_FSC0 ((uint32_t)0x00000001) /*!<Filter Scale Configuration bit 0 */
+#define CAN_FS1R_FSC1 ((uint32_t)0x00000002) /*!<Filter Scale Configuration bit 1 */
+#define CAN_FS1R_FSC2 ((uint32_t)0x00000004) /*!<Filter Scale Configuration bit 2 */
+#define CAN_FS1R_FSC3 ((uint32_t)0x00000008) /*!<Filter Scale Configuration bit 3 */
+#define CAN_FS1R_FSC4 ((uint32_t)0x00000010) /*!<Filter Scale Configuration bit 4 */
+#define CAN_FS1R_FSC5 ((uint32_t)0x00000020) /*!<Filter Scale Configuration bit 5 */
+#define CAN_FS1R_FSC6 ((uint32_t)0x00000040) /*!<Filter Scale Configuration bit 6 */
+#define CAN_FS1R_FSC7 ((uint32_t)0x00000080) /*!<Filter Scale Configuration bit 7 */
+#define CAN_FS1R_FSC8 ((uint32_t)0x00000100) /*!<Filter Scale Configuration bit 8 */
+#define CAN_FS1R_FSC9 ((uint32_t)0x00000200) /*!<Filter Scale Configuration bit 9 */
+#define CAN_FS1R_FSC10 ((uint32_t)0x00000400) /*!<Filter Scale Configuration bit 10 */
+#define CAN_FS1R_FSC11 ((uint32_t)0x00000800) /*!<Filter Scale Configuration bit 11 */
+#define CAN_FS1R_FSC12 ((uint32_t)0x00001000) /*!<Filter Scale Configuration bit 12 */
+#define CAN_FS1R_FSC13 ((uint32_t)0x00002000) /*!<Filter Scale Configuration bit 13 */
+
+/****************** Bit definition for CAN_FFA1R register *******************/
+#define CAN_FFA1R_FFA ((uint32_t)0x00003FFF) /*!<Filter FIFO Assignment */
+#define CAN_FFA1R_FFA0 ((uint32_t)0x00000001) /*!<Filter FIFO Assignment for Filter 0 */
+#define CAN_FFA1R_FFA1 ((uint32_t)0x00000002) /*!<Filter FIFO Assignment for Filter 1 */
+#define CAN_FFA1R_FFA2 ((uint32_t)0x00000004) /*!<Filter FIFO Assignment for Filter 2 */
+#define CAN_FFA1R_FFA3 ((uint32_t)0x00000008) /*!<Filter FIFO Assignment for Filter 3 */
+#define CAN_FFA1R_FFA4 ((uint32_t)0x00000010) /*!<Filter FIFO Assignment for Filter 4 */
+#define CAN_FFA1R_FFA5 ((uint32_t)0x00000020) /*!<Filter FIFO Assignment for Filter 5 */
+#define CAN_FFA1R_FFA6 ((uint32_t)0x00000040) /*!<Filter FIFO Assignment for Filter 6 */
+#define CAN_FFA1R_FFA7 ((uint32_t)0x00000080) /*!<Filter FIFO Assignment for Filter 7 */
+#define CAN_FFA1R_FFA8 ((uint32_t)0x00000100) /*!<Filter FIFO Assignment for Filter 8 */
+#define CAN_FFA1R_FFA9 ((uint32_t)0x00000200) /*!<Filter FIFO Assignment for Filter 9 */
+#define CAN_FFA1R_FFA10 ((uint32_t)0x00000400) /*!<Filter FIFO Assignment for Filter 10 */
+#define CAN_FFA1R_FFA11 ((uint32_t)0x00000800) /*!<Filter FIFO Assignment for Filter 11 */
+#define CAN_FFA1R_FFA12 ((uint32_t)0x00001000) /*!<Filter FIFO Assignment for Filter 12 */
+#define CAN_FFA1R_FFA13 ((uint32_t)0x00002000) /*!<Filter FIFO Assignment for Filter 13 */
+
+/******************* Bit definition for CAN_FA1R register *******************/
+#define CAN_FA1R_FACT ((uint32_t)0x00003FFF) /*!<Filter Active */
+#define CAN_FA1R_FACT0 ((uint32_t)0x00000001) /*!<Filter 0 Active */
+#define CAN_FA1R_FACT1 ((uint32_t)0x00000002) /*!<Filter 1 Active */
+#define CAN_FA1R_FACT2 ((uint32_t)0x00000004) /*!<Filter 2 Active */
+#define CAN_FA1R_FACT3 ((uint32_t)0x00000008) /*!<Filter 3 Active */
+#define CAN_FA1R_FACT4 ((uint32_t)0x00000010) /*!<Filter 4 Active */
+#define CAN_FA1R_FACT5 ((uint32_t)0x00000020) /*!<Filter 5 Active */
+#define CAN_FA1R_FACT6 ((uint32_t)0x00000040) /*!<Filter 6 Active */
+#define CAN_FA1R_FACT7 ((uint32_t)0x00000080) /*!<Filter 7 Active */
+#define CAN_FA1R_FACT8 ((uint32_t)0x00000100) /*!<Filter 8 Active */
+#define CAN_FA1R_FACT9 ((uint32_t)0x00000200) /*!<Filter 9 Active */
+#define CAN_FA1R_FACT10 ((uint32_t)0x00000400) /*!<Filter 10 Active */
+#define CAN_FA1R_FACT11 ((uint32_t)0x00000800) /*!<Filter 11 Active */
+#define CAN_FA1R_FACT12 ((uint32_t)0x00001000) /*!<Filter 12 Active */
+#define CAN_FA1R_FACT13 ((uint32_t)0x00002000) /*!<Filter 13 Active */
+
+/******************* Bit definition for CAN_F0R1 register *******************/
+#define CAN_F0R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F0R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F0R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F0R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F0R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F0R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F0R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F0R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F0R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F0R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F0R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F0R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F0R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F0R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F0R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F0R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F0R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F0R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F0R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F0R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F0R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F0R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F0R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F0R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F0R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F0R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F0R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F0R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F0R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F0R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F0R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F0R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F1R1 register *******************/
+#define CAN_F1R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F1R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F1R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F1R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F1R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F1R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F1R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F1R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F1R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F1R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F1R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F1R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F1R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F1R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F1R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F1R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F1R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F1R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F1R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F1R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F1R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F1R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F1R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F1R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F1R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F1R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F1R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F1R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F1R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F1R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F1R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F1R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F2R1 register *******************/
+#define CAN_F2R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F2R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F2R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F2R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F2R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F2R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F2R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F2R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F2R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F2R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F2R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F2R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F2R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F2R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F2R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F2R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F2R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F2R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F2R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F2R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F2R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F2R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F2R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F2R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F2R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F2R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F2R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F2R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F2R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F2R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F2R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F2R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F3R1 register *******************/
+#define CAN_F3R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F3R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F3R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F3R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F3R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F3R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F3R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F3R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F3R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F3R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F3R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F3R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F3R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F3R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F3R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F3R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F3R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F3R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F3R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F3R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F3R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F3R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F3R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F3R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F3R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F3R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F3R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F3R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F3R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F3R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F3R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F3R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F4R1 register *******************/
+#define CAN_F4R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F4R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F4R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F4R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F4R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F4R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F4R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F4R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F4R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F4R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F4R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F4R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F4R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F4R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F4R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F4R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F4R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F4R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F4R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F4R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F4R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F4R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F4R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F4R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F4R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F4R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F4R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F4R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F4R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F4R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F4R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F4R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F5R1 register *******************/
+#define CAN_F5R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F5R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F5R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F5R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F5R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F5R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F5R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F5R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F5R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F5R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F5R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F5R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F5R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F5R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F5R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F5R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F5R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F5R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F5R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F5R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F5R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F5R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F5R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F5R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F5R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F5R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F5R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F5R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F5R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F5R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F5R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F5R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F6R1 register *******************/
+#define CAN_F6R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F6R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F6R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F6R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F6R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F6R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F6R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F6R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F6R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F6R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F6R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F6R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F6R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F6R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F6R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F6R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F6R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F6R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F6R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F6R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F6R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F6R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F6R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F6R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F6R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F6R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F6R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F6R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F6R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F6R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F6R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F6R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F7R1 register *******************/
+#define CAN_F7R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F7R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F7R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F7R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F7R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F7R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F7R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F7R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F7R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F7R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F7R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F7R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F7R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F7R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F7R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F7R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F7R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F7R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F7R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F7R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F7R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F7R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F7R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F7R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F7R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F7R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F7R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F7R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F7R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F7R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F7R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F7R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F8R1 register *******************/
+#define CAN_F8R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F8R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F8R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F8R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F8R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F8R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F8R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F8R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F8R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F8R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F8R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F8R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F8R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F8R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F8R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F8R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F8R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F8R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F8R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F8R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F8R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F8R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F8R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F8R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F8R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F8R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F8R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F8R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F8R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F8R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F8R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F8R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F9R1 register *******************/
+#define CAN_F9R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F9R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F9R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F9R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F9R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F9R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F9R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F9R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F9R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F9R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F9R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F9R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F9R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F9R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F9R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F9R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F9R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F9R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F9R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F9R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F9R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F9R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F9R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F9R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F9R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F9R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F9R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F9R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F9R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F9R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F9R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F9R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F10R1 register ******************/
+#define CAN_F10R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F10R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F10R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F10R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F10R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F10R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F10R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F10R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F10R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F10R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F10R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F10R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F10R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F10R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F10R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F10R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F10R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F10R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F10R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F10R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F10R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F10R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F10R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F10R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F10R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F10R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F10R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F10R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F10R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F10R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F10R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F10R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F11R1 register ******************/
+#define CAN_F11R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F11R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F11R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F11R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F11R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F11R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F11R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F11R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F11R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F11R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F11R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F11R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F11R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F11R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F11R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F11R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F11R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F11R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F11R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F11R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F11R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F11R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F11R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F11R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F11R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F11R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F11R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F11R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F11R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F11R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F11R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F11R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F12R1 register ******************/
+#define CAN_F12R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F12R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F12R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F12R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F12R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F12R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F12R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F12R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F12R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F12R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F12R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F12R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F12R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F12R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F12R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F12R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F12R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F12R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F12R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F12R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F12R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F12R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F12R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F12R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F12R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F12R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F12R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F12R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F12R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F12R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F12R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F12R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F13R1 register ******************/
+#define CAN_F13R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F13R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F13R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F13R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F13R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F13R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F13R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F13R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F13R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F13R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F13R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F13R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F13R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F13R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F13R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F13R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F13R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F13R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F13R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F13R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F13R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F13R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F13R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F13R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F13R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F13R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F13R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F13R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F13R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F13R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F13R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F13R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F0R2 register *******************/
+#define CAN_F0R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F0R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F0R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F0R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F0R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F0R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F0R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F0R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F0R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F0R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F0R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F0R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F0R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F0R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F0R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F0R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F0R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F0R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F0R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F0R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F0R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F0R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F0R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F0R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F0R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F0R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F0R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F0R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F0R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F0R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F0R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F0R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F1R2 register *******************/
+#define CAN_F1R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F1R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F1R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F1R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F1R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F1R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F1R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F1R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F1R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F1R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F1R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F1R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F1R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F1R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F1R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F1R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F1R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F1R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F1R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F1R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F1R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F1R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F1R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F1R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F1R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F1R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F1R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F1R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F1R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F1R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F1R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F1R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F2R2 register *******************/
+#define CAN_F2R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F2R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F2R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F2R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F2R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F2R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F2R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F2R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F2R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F2R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F2R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F2R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F2R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F2R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F2R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F2R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F2R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F2R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F2R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F2R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F2R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F2R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F2R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F2R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F2R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F2R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F2R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F2R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F2R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F2R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F2R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F2R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F3R2 register *******************/
+#define CAN_F3R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F3R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F3R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F3R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F3R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F3R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F3R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F3R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F3R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F3R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F3R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F3R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F3R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F3R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F3R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F3R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F3R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F3R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F3R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F3R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F3R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F3R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F3R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F3R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F3R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F3R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F3R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F3R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F3R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F3R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F3R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F3R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F4R2 register *******************/
+#define CAN_F4R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F4R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F4R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F4R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F4R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F4R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F4R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F4R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F4R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F4R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F4R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F4R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F4R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F4R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F4R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F4R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F4R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F4R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F4R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F4R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F4R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F4R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F4R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F4R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F4R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F4R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F4R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F4R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F4R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F4R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F4R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F4R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F5R2 register *******************/
+#define CAN_F5R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F5R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F5R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F5R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F5R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F5R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F5R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F5R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F5R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F5R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F5R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F5R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F5R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F5R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F5R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F5R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F5R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F5R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F5R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F5R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F5R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F5R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F5R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F5R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F5R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F5R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F5R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F5R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F5R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F5R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F5R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F5R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F6R2 register *******************/
+#define CAN_F6R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F6R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F6R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F6R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F6R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F6R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F6R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F6R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F6R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F6R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F6R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F6R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F6R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F6R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F6R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F6R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F6R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F6R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F6R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F6R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F6R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F6R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F6R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F6R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F6R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F6R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F6R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F6R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F6R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F6R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F6R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F6R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F7R2 register *******************/
+#define CAN_F7R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F7R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F7R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F7R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F7R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F7R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F7R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F7R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F7R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F7R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F7R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F7R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F7R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F7R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F7R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F7R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F7R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F7R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F7R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F7R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F7R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F7R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F7R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F7R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F7R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F7R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F7R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F7R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F7R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F7R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F7R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F7R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F8R2 register *******************/
+#define CAN_F8R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F8R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F8R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F8R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F8R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F8R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F8R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F8R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F8R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F8R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F8R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F8R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F8R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F8R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F8R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F8R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F8R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F8R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F8R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F8R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F8R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F8R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F8R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F8R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F8R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F8R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F8R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F8R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F8R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F8R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F8R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F8R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F9R2 register *******************/
+#define CAN_F9R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F9R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F9R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F9R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F9R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F9R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F9R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F9R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F9R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F9R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F9R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F9R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F9R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F9R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F9R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F9R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F9R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F9R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F9R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F9R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F9R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F9R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F9R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F9R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F9R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F9R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F9R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F9R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F9R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F9R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F9R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F9R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F10R2 register ******************/
+#define CAN_F10R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F10R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F10R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F10R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F10R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F10R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F10R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F10R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F10R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F10R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F10R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F10R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F10R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F10R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F10R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F10R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F10R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F10R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F10R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F10R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F10R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F10R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F10R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F10R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F10R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F10R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F10R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F10R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F10R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F10R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F10R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F10R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F11R2 register ******************/
+#define CAN_F11R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F11R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F11R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F11R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F11R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F11R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F11R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F11R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F11R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F11R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F11R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F11R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F11R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F11R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F11R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F11R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F11R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F11R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F11R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F11R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F11R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F11R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F11R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F11R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F11R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F11R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F11R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F11R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F11R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F11R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F11R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F11R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F12R2 register ******************/
+#define CAN_F12R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F12R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F12R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F12R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F12R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F12R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F12R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F12R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F12R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F12R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F12R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F12R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F12R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F12R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F12R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F12R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F12R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F12R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F12R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F12R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F12R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F12R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F12R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F12R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F12R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F12R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F12R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F12R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F12R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F12R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F12R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F12R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F13R2 register ******************/
+#define CAN_F13R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F13R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F13R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F13R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F13R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F13R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F13R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F13R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F13R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F13R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F13R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F13R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F13R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F13R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F13R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F13R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F13R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F13R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F13R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F13R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F13R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F13R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F13R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F13R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F13R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F13R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F13R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F13R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F13R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F13R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F13R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F13R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************************************************************************/
+/* */
+/* HDMI-CEC (CEC) */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for CEC_CR register *********************/
+#define CEC_CR_CECEN ((uint32_t)0x00000001) /*!< CEC Enable */
+#define CEC_CR_TXSOM ((uint32_t)0x00000002) /*!< CEC Tx Start Of Message */
+#define CEC_CR_TXEOM ((uint32_t)0x00000004) /*!< CEC Tx End Of Message */
+
+/******************* Bit definition for CEC_CFGR register *******************/
+#define CEC_CFGR_SFT ((uint32_t)0x00000007) /*!< CEC Signal Free Time */
+#define CEC_CFGR_RXTOL ((uint32_t)0x00000008) /*!< CEC Tolerance */
+#define CEC_CFGR_BRESTP ((uint32_t)0x00000010) /*!< CEC Rx Stop */
+#define CEC_CFGR_BREGEN ((uint32_t)0x00000020) /*!< CEC Bit Rising Error generation */
+#define CEC_CFGR_LBPEGEN ((uint32_t)0x00000040) /*!< CEC Long Bit Period Error gener. */
+#define CEC_CFGR_BRDNOGEN ((uint32_t)0x00000080) /*!< CEC Broadcast No Error generation */
+#define CEC_CFGR_SFTOPT ((uint32_t)0x00000100) /*!< CEC Signal Free Time optional */
+#define CEC_CFGR_OAR ((uint32_t)0x7FFF0000) /*!< CEC Own Address */
+#define CEC_CFGR_LSTN ((uint32_t)0x80000000) /*!< CEC Listen mode */
+
+/******************* Bit definition for CEC_TXDR register *******************/
+#define CEC_TXDR_TXD ((uint32_t)0x000000FF) /*!< CEC Tx Data */
+
+/******************* Bit definition for CEC_RXDR register *******************/
+#define CEC_TXDR_RXD ((uint32_t)0x000000FF) /*!< CEC Rx Data */
+
+/******************* Bit definition for CEC_ISR register ********************/
+#define CEC_ISR_RXBR ((uint32_t)0x00000001) /*!< CEC Rx-Byte Received */
+#define CEC_ISR_RXEND ((uint32_t)0x00000002) /*!< CEC End Of Reception */
+#define CEC_ISR_RXOVR ((uint32_t)0x00000004) /*!< CEC Rx-Overrun */
+#define CEC_ISR_BRE ((uint32_t)0x00000008) /*!< CEC Rx Bit Rising Error */
+#define CEC_ISR_SBPE ((uint32_t)0x00000010) /*!< CEC Rx Short Bit period Error */
+#define CEC_ISR_LBPE ((uint32_t)0x00000020) /*!< CEC Rx Long Bit period Error */
+#define CEC_ISR_RXACKE ((uint32_t)0x00000040) /*!< CEC Rx Missing Acknowledge */
+#define CEC_ISR_ARBLST ((uint32_t)0x00000080) /*!< CEC Arbitration Lost */
+#define CEC_ISR_TXBR ((uint32_t)0x00000100) /*!< CEC Tx Byte Request */
+#define CEC_ISR_TXEND ((uint32_t)0x00000200) /*!< CEC End of Transmission */
+#define CEC_ISR_TXUDR ((uint32_t)0x00000400) /*!< CEC Tx-Buffer Underrun */
+#define CEC_ISR_TXERR ((uint32_t)0x00000800) /*!< CEC Tx-Error */
+#define CEC_ISR_TXACKE ((uint32_t)0x00001000) /*!< CEC Tx Missing Acknowledge */
+
+/******************* Bit definition for CEC_IER register ********************/
+#define CEC_IER_RXBRIE ((uint32_t)0x00000001) /*!< CEC Rx-Byte Received IT Enable */
+#define CEC_IER_RXENDIE ((uint32_t)0x00000002) /*!< CEC End Of Reception IT Enable */
+#define CEC_IER_RXOVRIE ((uint32_t)0x00000004) /*!< CEC Rx-Overrun IT Enable */
+#define CEC_IER_BREIE ((uint32_t)0x00000008) /*!< CEC Rx Bit Rising Error IT Enable */
+#define CEC_IER_SBPEIE ((uint32_t)0x00000010) /*!< CEC Rx Short Bit period Error IT Enable*/
+#define CEC_IER_LBPEIE ((uint32_t)0x00000020) /*!< CEC Rx Long Bit period Error IT Enable */
+#define CEC_IER_RXACKEIE ((uint32_t)0x00000040) /*!< CEC Rx Missing Acknowledge IT Enable */
+#define CEC_IER_ARBLSTIE ((uint32_t)0x00000080) /*!< CEC Arbitration Lost IT Enable */
+#define CEC_IER_TXBRIE ((uint32_t)0x00000100) /*!< CEC Tx Byte Request IT Enable */
+#define CEC_IER_TXENDIE ((uint32_t)0x00000200) /*!< CEC End of Transmission IT Enable */
+#define CEC_IER_TXUDRIE ((uint32_t)0x00000400) /*!< CEC Tx-Buffer Underrun IT Enable */
+#define CEC_IER_TXERRIE ((uint32_t)0x00000800) /*!< CEC Tx-Error IT Enable */
+#define CEC_IER_TXACKEIE ((uint32_t)0x00001000) /*!< CEC Tx Missing Acknowledge IT Enable */
+
+
+/******************************************************************************/
+/* */
+/* CRC calculation unit (CRC) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for CRC_DR register *********************/
+#define CRC_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data register bits */
+
+/******************* Bit definition for CRC_IDR register ********************/
+#define CRC_IDR_IDR ((uint8_t)0xFF) /*!< General-purpose 8-bit data register bits */
+
+/******************** Bit definition for CRC_CR register ********************/
+#define CRC_CR_RESET ((uint32_t)0x00000001) /*!< RESET the CRC computation unit bit */
+#define CRC_CR_REV_IN ((uint32_t)0x00000060) /*!< REV_IN Reverse Input Data bits */
+#define CRC_CR_REV_IN_0 ((uint32_t)0x00000020) /*!< REV_IN Bit 0 */
+#define CRC_CR_REV_IN_1 ((uint32_t)0x00000040) /*!< REV_IN Bit 1 */
+#define CRC_CR_REV_OUT ((uint32_t)0x00000080) /*!< REV_OUT Reverse Output Data bits */
+
+/******************* Bit definition for CRC_INIT register *******************/
+#define CRC_INIT_INIT ((uint32_t)0xFFFFFFFF) /*!< Initial CRC value bits */
+
+
+/******************************************************************************/
+/* */
+/* CRS Clock Recovery System */
+/******************************************************************************/
+
+/******************* Bit definition for CRS_CR register *********************/
+#define CRS_CR_SYNCOKIE ((uint32_t)0x00000001) /* SYNC event OK interrupt enable */
+#define CRS_CR_SYNCWARNIE ((uint32_t)0x00000002) /* SYNC warning interrupt enable */
+#define CRS_CR_ERRIE ((uint32_t)0x00000004) /* SYNC error interrupt enable */
+#define CRS_CR_ESYNCIE ((uint32_t)0x00000008) /* Expected SYNC(ESYNCF) interrupt Enable*/
+#define CRS_CR_CEN ((uint32_t)0x00000020) /* Frequency error counter enable */
+#define CRS_CR_AUTOTRIMEN ((uint32_t)0x00000040) /* Automatic trimming enable */
+#define CRS_CR_SWSYNC ((uint32_t)0x00000080) /* A Software SYNC event is generated */
+#define CRS_CR_TRIM ((uint32_t)0x00003F00) /* HSI48 oscillator smooth trimming */
+
+/******************* Bit definition for CRS_CFGR register *********************/
+#define CRS_CFGR_RELOAD ((uint32_t)0x0000FFFF) /* Counter reload value */
+#define CRS_CFGR_FELIM ((uint32_t)0x00FF0000) /* Frequency error limit */
+
+#define CRS_CFGR_SYNCDIV ((uint32_t)0x07000000) /* SYNC divider */
+#define CRS_CFGR_SYNCDIV_0 ((uint32_t)0x01000000) /* Bit 0 */
+#define CRS_CFGR_SYNCDIV_1 ((uint32_t)0x02000000) /* Bit 1 */
+#define CRS_CFGR_SYNCDIV_2 ((uint32_t)0x04000000) /* Bit 2 */
+
+#define CRS_CFGR_SYNCSRC ((uint32_t)0x30000000) /* SYNC signal source selection */
+#define CRS_CFGR_SYNCSRC_0 ((uint32_t)0x10000000) /* Bit 0 */
+#define CRS_CFGR_SYNCSRC_1 ((uint32_t)0x20000000) /* Bit 1 */
+
+#define CRS_CFGR_SYNCPOL ((uint32_t)0x80000000) /* SYNC polarity selection */
+
+/******************* Bit definition for CRS_ISR register *********************/
+#define CRS_ISR_SYNCOKF ((uint32_t)0x00000001) /* SYNC event OK flag */
+#define CRS_ISR_SYNCWARNF ((uint32_t)0x00000002) /* SYNC warning */
+#define CRS_ISR_ERRF ((uint32_t)0x00000004) /* SYNC error flag */
+#define CRS_ISR_ESYNCF ((uint32_t)0x00000008) /* Expected SYNC flag */
+#define CRS_ISR_SYNCERR ((uint32_t)0x00000100) /* SYNC error */
+#define CRS_ISR_SYNCMISS ((uint32_t)0x00000200) /* SYNC missed */
+#define CRS_ISR_TRIMOVF ((uint32_t)0x00000400) /* Trimming overflow or underflow */
+#define CRS_ISR_FEDIR ((uint32_t)0x00008000) /* Frequency error direction */
+#define CRS_ISR_FECAP ((uint32_t)0xFFFF0000) /* Frequency error capture */
+
+/******************* Bit definition for CRS_ICR register *********************/
+#define CRS_ICR_SYNCOKC ((uint32_t)0x00000001) /* SYNC event OK clear flag */
+#define CRS_ICR_SYNCWARNC ((uint32_t)0x00000002) /* SYNC warning clear flag */
+#define CRS_ICR_ERRC ((uint32_t)0x00000004) /* Error clear flag */
+#define CRS_ICR_ESYNCC ((uint32_t)0x00000008) /* Expected SYNC clear flag */
+
+
+/******************************************************************************/
+/* */
+/* Debug MCU (DBGMCU) */
+/* */
+/******************************************************************************/
+
+/**************** Bit definition for DBGMCU_IDCODE register *****************/
+#define DBGMCU_IDCODE_DEV_ID ((uint32_t)0x00000FFF) /*!< Device Identifier */
+
+#define DBGMCU_IDCODE_REV_ID ((uint32_t)0xFFFF0000) /*!< REV_ID[15:0] bits (Revision Identifier) */
+#define DBGMCU_IDCODE_REV_ID_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define DBGMCU_IDCODE_REV_ID_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define DBGMCU_IDCODE_REV_ID_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define DBGMCU_IDCODE_REV_ID_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+#define DBGMCU_IDCODE_REV_ID_4 ((uint32_t)0x00100000) /*!< Bit 4 */
+#define DBGMCU_IDCODE_REV_ID_5 ((uint32_t)0x00200000) /*!< Bit 5 */
+#define DBGMCU_IDCODE_REV_ID_6 ((uint32_t)0x00400000) /*!< Bit 6 */
+#define DBGMCU_IDCODE_REV_ID_7 ((uint32_t)0x00800000) /*!< Bit 7 */
+#define DBGMCU_IDCODE_REV_ID_8 ((uint32_t)0x01000000) /*!< Bit 8 */
+#define DBGMCU_IDCODE_REV_ID_9 ((uint32_t)0x02000000) /*!< Bit 9 */
+#define DBGMCU_IDCODE_REV_ID_10 ((uint32_t)0x04000000) /*!< Bit 10 */
+#define DBGMCU_IDCODE_REV_ID_11 ((uint32_t)0x08000000) /*!< Bit 11 */
+#define DBGMCU_IDCODE_REV_ID_12 ((uint32_t)0x10000000) /*!< Bit 12 */
+#define DBGMCU_IDCODE_REV_ID_13 ((uint32_t)0x20000000) /*!< Bit 13 */
+#define DBGMCU_IDCODE_REV_ID_14 ((uint32_t)0x40000000) /*!< Bit 14 */
+#define DBGMCU_IDCODE_REV_ID_15 ((uint32_t)0x80000000) /*!< Bit 15 */
+
+/****************** Bit definition for DBGMCU_CR register *******************/
+#define DBGMCU_CR_DBG_STOP ((uint32_t)0x00000002) /*!< Debug Stop Mode */
+#define DBGMCU_CR_DBG_STANDBY ((uint32_t)0x00000004) /*!< Debug Standby mode */
+
+/****************** Bit definition for DBGMCU_APB1_FZ register **************/
+#define DBGMCU_APB1_FZ_DBG_TIM2_STOP ((uint32_t)0x00000001) /*!< TIM2 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM3_STOP ((uint32_t)0x00000002) /*!< TIM3 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM14_STOP ((uint32_t)0x00000100) /*!< TIM14 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_RTC_STOP ((uint32_t)0x00000400) /*!< RTC Calendar frozen when core is halted */
+#define DBGMCU_APB1_FZ_DBG_WWDG_STOP ((uint32_t)0x00000800) /*!< Debug Window Watchdog stopped when Core is halted */
+#define DBGMCU_APB1_FZ_DBG_IWDG_STOP ((uint32_t)0x00001000) /*!< Debug Independent Watchdog stopped when Core is halted */
+#define DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00200000) /*!< I2C1 SMBUS timeout mode stopped when Core is halted */
+#define DBGMCU_APB1_FZ_DBG_CAN_STOP ((uint32_t)0x02000000) /*!< CAN debug stopped when Core is halted */
+
+/****************** Bit definition for DBGMCU_APB2_FZ register **************/
+#define DBGMCU_APB2_FZ_DBG_TIM1_STOP ((uint32_t)0x00000800) /*!< TIM1 counter stopped when core is halted */
+#define DBGMCU_APB2_FZ_DBG_TIM16_STOP ((uint32_t)0x00020000) /*!< TIM16 counter stopped when core is halted */
+#define DBGMCU_APB2_FZ_DBG_TIM17_STOP ((uint32_t)0x00040000) /*!< TIM17 counter stopped when core is halted */
+
+/******************************************************************************/
+/* */
+/* DMA Controller (DMA) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for DMA_ISR register ********************/
+#define DMA_ISR_GIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt flag */
+#define DMA_ISR_TCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete flag */
+#define DMA_ISR_HTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer flag */
+#define DMA_ISR_TEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error flag */
+#define DMA_ISR_GIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt flag */
+#define DMA_ISR_TCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete flag */
+#define DMA_ISR_HTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer flag */
+#define DMA_ISR_TEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error flag */
+#define DMA_ISR_GIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt flag */
+#define DMA_ISR_TCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete flag */
+#define DMA_ISR_HTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer flag */
+#define DMA_ISR_TEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error flag */
+#define DMA_ISR_GIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt flag */
+#define DMA_ISR_TCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete flag */
+#define DMA_ISR_HTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer flag */
+#define DMA_ISR_TEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error flag */
+#define DMA_ISR_GIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt flag */
+#define DMA_ISR_TCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete flag */
+#define DMA_ISR_HTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer flag */
+#define DMA_ISR_TEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error flag */
+#define DMA_ISR_GIF6 ((uint32_t)0x00100000) /*!< Channel 6 Global interrupt flag */
+#define DMA_ISR_TCIF6 ((uint32_t)0x00200000) /*!< Channel 6 Transfer Complete flag */
+#define DMA_ISR_HTIF6 ((uint32_t)0x00400000) /*!< Channel 6 Half Transfer flag */
+#define DMA_ISR_TEIF6 ((uint32_t)0x00800000) /*!< Channel 6 Transfer Error flag */
+#define DMA_ISR_GIF7 ((uint32_t)0x01000000) /*!< Channel 7 Global interrupt flag */
+#define DMA_ISR_TCIF7 ((uint32_t)0x02000000) /*!< Channel 7 Transfer Complete flag */
+#define DMA_ISR_HTIF7 ((uint32_t)0x04000000) /*!< Channel 7 Half Transfer flag */
+#define DMA_ISR_TEIF7 ((uint32_t)0x08000000) /*!< Channel 7 Transfer Error flag */
+
+/******************* Bit definition for DMA_IFCR register *******************/
+#define DMA_IFCR_CGIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt clear */
+#define DMA_IFCR_CTCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete clear */
+#define DMA_IFCR_CHTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer clear */
+#define DMA_IFCR_CTEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error clear */
+#define DMA_IFCR_CGIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt clear */
+#define DMA_IFCR_CTCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete clear */
+#define DMA_IFCR_CHTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer clear */
+#define DMA_IFCR_CTEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error clear */
+#define DMA_IFCR_CGIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt clear */
+#define DMA_IFCR_CTCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete clear */
+#define DMA_IFCR_CHTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer clear */
+#define DMA_IFCR_CTEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error clear */
+#define DMA_IFCR_CGIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt clear */
+#define DMA_IFCR_CTCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete clear */
+#define DMA_IFCR_CHTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer clear */
+#define DMA_IFCR_CTEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error clear */
+#define DMA_IFCR_CGIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt clear */
+#define DMA_IFCR_CTCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete clear */
+#define DMA_IFCR_CHTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer clear */
+#define DMA_IFCR_CTEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error clear */
+#define DMA_IFCR_CGIF6 ((uint32_t)0x00100000) /*!< Channel 6 Global interrupt clear */
+#define DMA_IFCR_CTCIF6 ((uint32_t)0x00200000) /*!< Channel 6 Transfer Complete clear */
+#define DMA_IFCR_CHTIF6 ((uint32_t)0x00400000) /*!< Channel 6 Half Transfer clear */
+#define DMA_IFCR_CTEIF6 ((uint32_t)0x00800000) /*!< Channel 6 Transfer Error clear */
+#define DMA_IFCR_CGIF7 ((uint32_t)0x01000000) /*!< Channel 7 Global interrupt clear */
+#define DMA_IFCR_CTCIF7 ((uint32_t)0x02000000) /*!< Channel 7 Transfer Complete clear */
+#define DMA_IFCR_CHTIF7 ((uint32_t)0x04000000) /*!< Channel 7 Half Transfer clear */
+#define DMA_IFCR_CTEIF7 ((uint32_t)0x08000000) /*!< Channel 7 Transfer Error clear */
+
+/******************* Bit definition for DMA_CCR register ********************/
+#define DMA_CCR_EN ((uint32_t)0x00000001) /*!< Channel enable */
+#define DMA_CCR_TCIE ((uint32_t)0x00000002) /*!< Transfer complete interrupt enable */
+#define DMA_CCR_HTIE ((uint32_t)0x00000004) /*!< Half Transfer interrupt enable */
+#define DMA_CCR_TEIE ((uint32_t)0x00000008) /*!< Transfer error interrupt enable */
+#define DMA_CCR_DIR ((uint32_t)0x00000010) /*!< Data transfer direction */
+#define DMA_CCR_CIRC ((uint32_t)0x00000020) /*!< Circular mode */
+#define DMA_CCR_PINC ((uint32_t)0x00000040) /*!< Peripheral increment mode */
+#define DMA_CCR_MINC ((uint32_t)0x00000080) /*!< Memory increment mode */
+
+#define DMA_CCR_PSIZE ((uint32_t)0x00000300) /*!< PSIZE[1:0] bits (Peripheral size) */
+#define DMA_CCR_PSIZE_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define DMA_CCR_PSIZE_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+
+#define DMA_CCR_MSIZE ((uint32_t)0x00000C00) /*!< MSIZE[1:0] bits (Memory size) */
+#define DMA_CCR_MSIZE_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define DMA_CCR_MSIZE_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+
+#define DMA_CCR_PL ((uint32_t)0x00003000) /*!< PL[1:0] bits(Channel Priority level)*/
+#define DMA_CCR_PL_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define DMA_CCR_PL_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+
+#define DMA_CCR_MEM2MEM ((uint32_t)0x00004000) /*!< Memory to memory mode */
+
+/****************** Bit definition for DMA_CNDTR register *******************/
+#define DMA_CNDTR_NDT ((uint32_t)0x0000FFFF) /*!< Number of data to Transfer */
+
+/****************** Bit definition for DMA_CPAR register ********************/
+#define DMA_CPAR_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */
+
+/****************** Bit definition for DMA_CMAR register ********************/
+#define DMA_CMAR_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */
+
+/******************************************************************************/
+/* */
+/* External Interrupt/Event Controller (EXTI) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for EXTI_IMR register *******************/
+#define EXTI_IMR_MR0 ((uint32_t)0x00000001) /*!< Interrupt Mask on line 0 */
+#define EXTI_IMR_MR1 ((uint32_t)0x00000002) /*!< Interrupt Mask on line 1 */
+#define EXTI_IMR_MR2 ((uint32_t)0x00000004) /*!< Interrupt Mask on line 2 */
+#define EXTI_IMR_MR3 ((uint32_t)0x00000008) /*!< Interrupt Mask on line 3 */
+#define EXTI_IMR_MR4 ((uint32_t)0x00000010) /*!< Interrupt Mask on line 4 */
+#define EXTI_IMR_MR5 ((uint32_t)0x00000020) /*!< Interrupt Mask on line 5 */
+#define EXTI_IMR_MR6 ((uint32_t)0x00000040) /*!< Interrupt Mask on line 6 */
+#define EXTI_IMR_MR7 ((uint32_t)0x00000080) /*!< Interrupt Mask on line 7 */
+#define EXTI_IMR_MR8 ((uint32_t)0x00000100) /*!< Interrupt Mask on line 8 */
+#define EXTI_IMR_MR9 ((uint32_t)0x00000200) /*!< Interrupt Mask on line 9 */
+#define EXTI_IMR_MR10 ((uint32_t)0x00000400) /*!< Interrupt Mask on line 10 */
+#define EXTI_IMR_MR11 ((uint32_t)0x00000800) /*!< Interrupt Mask on line 11 */
+#define EXTI_IMR_MR12 ((uint32_t)0x00001000) /*!< Interrupt Mask on line 12 */
+#define EXTI_IMR_MR13 ((uint32_t)0x00002000) /*!< Interrupt Mask on line 13 */
+#define EXTI_IMR_MR14 ((uint32_t)0x00004000) /*!< Interrupt Mask on line 14 */
+#define EXTI_IMR_MR15 ((uint32_t)0x00008000) /*!< Interrupt Mask on line 15 */
+#define EXTI_IMR_MR16 ((uint32_t)0x00010000) /*!< Interrupt Mask on line 16 */
+#define EXTI_IMR_MR17 ((uint32_t)0x00020000) /*!< Interrupt Mask on line 17 */
+#define EXTI_IMR_MR19 ((uint32_t)0x00080000) /*!< Interrupt Mask on line 19 */
+#define EXTI_IMR_MR21 ((uint32_t)0x00200000) /*!< Interrupt Mask on line 21 */
+#define EXTI_IMR_MR22 ((uint32_t)0x00400000) /*!< Interrupt Mask on line 22 */
+#define EXTI_IMR_MR23 ((uint32_t)0x00800000) /*!< Interrupt Mask on line 23 */
+#define EXTI_IMR_MR25 ((uint32_t)0x02000000) /*!< Interrupt Mask on line 25 */
+#define EXTI_IMR_MR27 ((uint32_t)0x08000000) /*!< Interrupt Mask on line 27 */
+
+/****************** Bit definition for EXTI_EMR register ********************/
+#define EXTI_EMR_MR0 ((uint32_t)0x00000001) /*!< Event Mask on line 0 */
+#define EXTI_EMR_MR1 ((uint32_t)0x00000002) /*!< Event Mask on line 1 */
+#define EXTI_EMR_MR2 ((uint32_t)0x00000004) /*!< Event Mask on line 2 */
+#define EXTI_EMR_MR3 ((uint32_t)0x00000008) /*!< Event Mask on line 3 */
+#define EXTI_EMR_MR4 ((uint32_t)0x00000010) /*!< Event Mask on line 4 */
+#define EXTI_EMR_MR5 ((uint32_t)0x00000020) /*!< Event Mask on line 5 */
+#define EXTI_EMR_MR6 ((uint32_t)0x00000040) /*!< Event Mask on line 6 */
+#define EXTI_EMR_MR7 ((uint32_t)0x00000080) /*!< Event Mask on line 7 */
+#define EXTI_EMR_MR8 ((uint32_t)0x00000100) /*!< Event Mask on line 8 */
+#define EXTI_EMR_MR9 ((uint32_t)0x00000200) /*!< Event Mask on line 9 */
+#define EXTI_EMR_MR10 ((uint32_t)0x00000400) /*!< Event Mask on line 10 */
+#define EXTI_EMR_MR11 ((uint32_t)0x00000800) /*!< Event Mask on line 11 */
+#define EXTI_EMR_MR12 ((uint32_t)0x00001000) /*!< Event Mask on line 12 */
+#define EXTI_EMR_MR13 ((uint32_t)0x00002000) /*!< Event Mask on line 13 */
+#define EXTI_EMR_MR14 ((uint32_t)0x00004000) /*!< Event Mask on line 14 */
+#define EXTI_EMR_MR15 ((uint32_t)0x00008000) /*!< Event Mask on line 15 */
+#define EXTI_EMR_MR16 ((uint32_t)0x00010000) /*!< Event Mask on line 16 */
+#define EXTI_EMR_MR17 ((uint32_t)0x00020000) /*!< Event Mask on line 17 */
+#define EXTI_EMR_MR19 ((uint32_t)0x00080000) /*!< Event Mask on line 19 */
+#define EXTI_EMR_MR21 ((uint32_t)0x00200000) /*!< Event Mask on line 21 */
+#define EXTI_EMR_MR22 ((uint32_t)0x00400000) /*!< Event Mask on line 22 */
+#define EXTI_EMR_MR23 ((uint32_t)0x00800000) /*!< Event Mask on line 23 */
+#define EXTI_EMR_MR25 ((uint32_t)0x02000000) /*!< Event Mask on line 25 */
+#define EXTI_EMR_MR27 ((uint32_t)0x08000000) /*!< Event Mask on line 27 */
+
+/******************* Bit definition for EXTI_RTSR register ******************/
+#define EXTI_RTSR_TR0 ((uint32_t)0x00000001) /*!< Rising trigger event configuration bit of line 0 */
+#define EXTI_RTSR_TR1 ((uint32_t)0x00000002) /*!< Rising trigger event configuration bit of line 1 */
+#define EXTI_RTSR_TR2 ((uint32_t)0x00000004) /*!< Rising trigger event configuration bit of line 2 */
+#define EXTI_RTSR_TR3 ((uint32_t)0x00000008) /*!< Rising trigger event configuration bit of line 3 */
+#define EXTI_RTSR_TR4 ((uint32_t)0x00000010) /*!< Rising trigger event configuration bit of line 4 */
+#define EXTI_RTSR_TR5 ((uint32_t)0x00000020) /*!< Rising trigger event configuration bit of line 5 */
+#define EXTI_RTSR_TR6 ((uint32_t)0x00000040) /*!< Rising trigger event configuration bit of line 6 */
+#define EXTI_RTSR_TR7 ((uint32_t)0x00000080) /*!< Rising trigger event configuration bit of line 7 */
+#define EXTI_RTSR_TR8 ((uint32_t)0x00000100) /*!< Rising trigger event configuration bit of line 8 */
+#define EXTI_RTSR_TR9 ((uint32_t)0x00000200) /*!< Rising trigger event configuration bit of line 9 */
+#define EXTI_RTSR_TR10 ((uint32_t)0x00000400) /*!< Rising trigger event configuration bit of line 10 */
+#define EXTI_RTSR_TR11 ((uint32_t)0x00000800) /*!< Rising trigger event configuration bit of line 11 */
+#define EXTI_RTSR_TR12 ((uint32_t)0x00001000) /*!< Rising trigger event configuration bit of line 12 */
+#define EXTI_RTSR_TR13 ((uint32_t)0x00002000) /*!< Rising trigger event configuration bit of line 13 */
+#define EXTI_RTSR_TR14 ((uint32_t)0x00004000) /*!< Rising trigger event configuration bit of line 14 */
+#define EXTI_RTSR_TR15 ((uint32_t)0x00008000) /*!< Rising trigger event configuration bit of line 15 */
+#define EXTI_RTSR_TR16 ((uint32_t)0x00010000) /*!< Rising trigger event configuration bit of line 16 */
+#define EXTI_RTSR_TR17 ((uint32_t)0x00020000) /*!< Rising trigger event configuration bit of line 17 */
+#define EXTI_RTSR_TR19 ((uint32_t)0x00080000) /*!< Rising trigger event configuration bit of line 19 */
+
+/******************* Bit definition for EXTI_FTSR register *******************/
+#define EXTI_FTSR_TR0 ((uint32_t)0x00000001) /*!< Falling trigger event configuration bit of line 0 */
+#define EXTI_FTSR_TR1 ((uint32_t)0x00000002) /*!< Falling trigger event configuration bit of line 1 */
+#define EXTI_FTSR_TR2 ((uint32_t)0x00000004) /*!< Falling trigger event configuration bit of line 2 */
+#define EXTI_FTSR_TR3 ((uint32_t)0x00000008) /*!< Falling trigger event configuration bit of line 3 */
+#define EXTI_FTSR_TR4 ((uint32_t)0x00000010) /*!< Falling trigger event configuration bit of line 4 */
+#define EXTI_FTSR_TR5 ((uint32_t)0x00000020) /*!< Falling trigger event configuration bit of line 5 */
+#define EXTI_FTSR_TR6 ((uint32_t)0x00000040) /*!< Falling trigger event configuration bit of line 6 */
+#define EXTI_FTSR_TR7 ((uint32_t)0x00000080) /*!< Falling trigger event configuration bit of line 7 */
+#define EXTI_FTSR_TR8 ((uint32_t)0x00000100) /*!< Falling trigger event configuration bit of line 8 */
+#define EXTI_FTSR_TR9 ((uint32_t)0x00000200) /*!< Falling trigger event configuration bit of line 9 */
+#define EXTI_FTSR_TR10 ((uint32_t)0x00000400) /*!< Falling trigger event configuration bit of line 10 */
+#define EXTI_FTSR_TR11 ((uint32_t)0x00000800) /*!< Falling trigger event configuration bit of line 11 */
+#define EXTI_FTSR_TR12 ((uint32_t)0x00001000) /*!< Falling trigger event configuration bit of line 12 */
+#define EXTI_FTSR_TR13 ((uint32_t)0x00002000) /*!< Falling trigger event configuration bit of line 13 */
+#define EXTI_FTSR_TR14 ((uint32_t)0x00004000) /*!< Falling trigger event configuration bit of line 14 */
+#define EXTI_FTSR_TR15 ((uint32_t)0x00008000) /*!< Falling trigger event configuration bit of line 15 */
+#define EXTI_FTSR_TR16 ((uint32_t)0x00010000) /*!< Falling trigger event configuration bit of line 16 */
+#define EXTI_FTSR_TR17 ((uint32_t)0x00020000) /*!< Falling trigger event configuration bit of line 17 */
+#define EXTI_FTSR_TR19 ((uint32_t)0x00080000) /*!< Falling trigger event configuration bit of line 19 */
+
+/******************* Bit definition for EXTI_SWIER register *******************/
+#define EXTI_SWIER_SWIER0 ((uint32_t)0x00000001) /*!< Software Interrupt on line 0 */
+#define EXTI_SWIER_SWIER1 ((uint32_t)0x00000002) /*!< Software Interrupt on line 1 */
+#define EXTI_SWIER_SWIER2 ((uint32_t)0x00000004) /*!< Software Interrupt on line 2 */
+#define EXTI_SWIER_SWIER3 ((uint32_t)0x00000008) /*!< Software Interrupt on line 3 */
+#define EXTI_SWIER_SWIER4 ((uint32_t)0x00000010) /*!< Software Interrupt on line 4 */
+#define EXTI_SWIER_SWIER5 ((uint32_t)0x00000020) /*!< Software Interrupt on line 5 */
+#define EXTI_SWIER_SWIER6 ((uint32_t)0x00000040) /*!< Software Interrupt on line 6 */
+#define EXTI_SWIER_SWIER7 ((uint32_t)0x00000080) /*!< Software Interrupt on line 7 */
+#define EXTI_SWIER_SWIER8 ((uint32_t)0x00000100) /*!< Software Interrupt on line 8 */
+#define EXTI_SWIER_SWIER9 ((uint32_t)0x00000200) /*!< Software Interrupt on line 9 */
+#define EXTI_SWIER_SWIER10 ((uint32_t)0x00000400) /*!< Software Interrupt on line 10 */
+#define EXTI_SWIER_SWIER11 ((uint32_t)0x00000800) /*!< Software Interrupt on line 11 */
+#define EXTI_SWIER_SWIER12 ((uint32_t)0x00001000) /*!< Software Interrupt on line 12 */
+#define EXTI_SWIER_SWIER13 ((uint32_t)0x00002000) /*!< Software Interrupt on line 13 */
+#define EXTI_SWIER_SWIER14 ((uint32_t)0x00004000) /*!< Software Interrupt on line 14 */
+#define EXTI_SWIER_SWIER15 ((uint32_t)0x00008000) /*!< Software Interrupt on line 15 */
+#define EXTI_SWIER_SWIER16 ((uint32_t)0x00010000) /*!< Software Interrupt on line 16 */
+#define EXTI_SWIER_SWIER17 ((uint32_t)0x00020000) /*!< Software Interrupt on line 17 */
+#define EXTI_SWIER_SWIER19 ((uint32_t)0x00080000) /*!< Software Interrupt on line 19 */
+
+/****************** Bit definition for EXTI_PR register *********************/
+#define EXTI_PR_PR0 ((uint32_t)0x00000001) /*!< Pending bit 0 */
+#define EXTI_PR_PR1 ((uint32_t)0x00000002) /*!< Pending bit 1 */
+#define EXTI_PR_PR2 ((uint32_t)0x00000004) /*!< Pending bit 2 */
+#define EXTI_PR_PR3 ((uint32_t)0x00000008) /*!< Pending bit 3 */
+#define EXTI_PR_PR4 ((uint32_t)0x00000010) /*!< Pending bit 4 */
+#define EXTI_PR_PR5 ((uint32_t)0x00000020) /*!< Pending bit 5 */
+#define EXTI_PR_PR6 ((uint32_t)0x00000040) /*!< Pending bit 6 */
+#define EXTI_PR_PR7 ((uint32_t)0x00000080) /*!< Pending bit 7 */
+#define EXTI_PR_PR8 ((uint32_t)0x00000100) /*!< Pending bit 8 */
+#define EXTI_PR_PR9 ((uint32_t)0x00000200) /*!< Pending bit 9 */
+#define EXTI_PR_PR10 ((uint32_t)0x00000400) /*!< Pending bit 10 */
+#define EXTI_PR_PR11 ((uint32_t)0x00000800) /*!< Pending bit 11 */
+#define EXTI_PR_PR12 ((uint32_t)0x00001000) /*!< Pending bit 12 */
+#define EXTI_PR_PR13 ((uint32_t)0x00002000) /*!< Pending bit 13 */
+#define EXTI_PR_PR14 ((uint32_t)0x00004000) /*!< Pending bit 14 */
+#define EXTI_PR_PR15 ((uint32_t)0x00008000) /*!< Pending bit 15 */
+#define EXTI_PR_PR16 ((uint32_t)0x00010000) /*!< Pending bit 16 */
+#define EXTI_PR_PR17 ((uint32_t)0x00020000) /*!< Pending bit 17 */
+#define EXTI_PR_PR19 ((uint32_t)0x00080000) /*!< Pending bit 19 */
+
+/******************************************************************************/
+/* */
+/* FLASH and Option Bytes Registers */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for FLASH_ACR register ******************/
+#define FLASH_ACR_LATENCY ((uint32_t)0x00000001) /*!< LATENCY bit (Latency) */
+
+#define FLASH_ACR_PRFTBE ((uint32_t)0x00000010) /*!< Prefetch Buffer Enable */
+#define FLASH_ACR_PRFTBS ((uint32_t)0x00000020) /*!< Prefetch Buffer Status */
+
+/****************** Bit definition for FLASH_KEYR register ******************/
+#define FLASH_KEYR_FKEYR ((uint32_t)0xFFFFFFFF) /*!< FPEC Key */
+
+/***************** Bit definition for FLASH_OPTKEYR register ****************/
+#define FLASH_OPTKEYR_OPTKEYR ((uint32_t)0xFFFFFFFF) /*!< Option Byte Key */
+
+/****************** FLASH Keys **********************************************/
+#define FLASH_FKEY1 ((uint32_t)0x45670123) /*!< Flash program erase key1 */
+#define FLASH_FKEY2 ((uint32_t)0xCDEF89AB) /*!< Flash program erase key2: used with FLASH_PEKEY1
+ to unlock the write access to the FPEC. */
+
+#define FLASH_OPTKEY1 ((uint32_t)0x45670123) /*!< Flash option key1 */
+#define FLASH_OPTKEY2 ((uint32_t)0xCDEF89AB) /*!< Flash option key2: used with FLASH_OPTKEY1 to
+ unlock the write access to the option byte block */
+
+/****************** Bit definition for FLASH_SR register *******************/
+#define FLASH_SR_BSY ((uint32_t)0x00000001) /*!< Busy */
+#define FLASH_SR_PGERR ((uint32_t)0x00000004) /*!< Programming Error */
+#define FLASH_SR_WRPRTERR ((uint32_t)0x00000010) /*!< Write Protection Error */
+#define FLASH_SR_EOP ((uint32_t)0x00000020) /*!< End of operation */
+#define FLASH_SR_WRPERR FLASH_SR_WRPRTERR /*!< Legacy of Write Protection Error */
+
+/******************* Bit definition for FLASH_CR register *******************/
+#define FLASH_CR_PG ((uint32_t)0x00000001) /*!< Programming */
+#define FLASH_CR_PER ((uint32_t)0x00000002) /*!< Page Erase */
+#define FLASH_CR_MER ((uint32_t)0x00000004) /*!< Mass Erase */
+#define FLASH_CR_OPTPG ((uint32_t)0x00000010) /*!< Option Byte Programming */
+#define FLASH_CR_OPTER ((uint32_t)0x00000020) /*!< Option Byte Erase */
+#define FLASH_CR_STRT ((uint32_t)0x00000040) /*!< Start */
+#define FLASH_CR_LOCK ((uint32_t)0x00000080) /*!< Lock */
+#define FLASH_CR_OPTWRE ((uint32_t)0x00000200) /*!< Option Bytes Write Enable */
+#define FLASH_CR_ERRIE ((uint32_t)0x00000400) /*!< Error Interrupt Enable */
+#define FLASH_CR_EOPIE ((uint32_t)0x00001000) /*!< End of operation interrupt enable */
+#define FLASH_CR_OBL_LAUNCH ((uint32_t)0x00002000) /*!< Option Bytes Loader Launch */
+
+/******************* Bit definition for FLASH_AR register *******************/
+#define FLASH_AR_FAR ((uint32_t)0xFFFFFFFF) /*!< Flash Address */
+
+/****************** Bit definition for FLASH_OBR register *******************/
+#define FLASH_OBR_OPTERR ((uint32_t)0x00000001) /*!< Option Byte Error */
+#define FLASH_OBR_RDPRT1 ((uint32_t)0x00000002) /*!< Read protection Level 1 */
+#define FLASH_OBR_RDPRT2 ((uint32_t)0x00000004) /*!< Read protection Level 2 */
+
+#define FLASH_OBR_USER ((uint32_t)0x00003700) /*!< User Option Bytes */
+#define FLASH_OBR_IWDG_SW ((uint32_t)0x00000100) /*!< IWDG SW */
+#define FLASH_OBR_nRST_STOP ((uint32_t)0x00000200) /*!< nRST_STOP */
+#define FLASH_OBR_nRST_STDBY ((uint32_t)0x00000400) /*!< nRST_STDBY */
+#define FLASH_OBR_nBOOT1 ((uint32_t)0x00001000) /*!< nBOOT1 */
+#define FLASH_OBR_VDDA_MONITOR ((uint32_t)0x00002000) /*!< VDDA power supply supervisor */
+
+/* Old BOOT1 bit definition, maintained for legacy purpose */
+#define FLASH_OBR_BOOT1 FLASH_OBR_nBOOT1
+
+/* Old OBR_VDDA bit definition, maintained for legacy purpose */
+#define FLASH_OBR_VDDA_ANALOG FLASH_OBR_VDDA_MONITOR
+
+/****************** Bit definition for FLASH_WRPR register ******************/
+#define FLASH_WRPR_WRP ((uint32_t)0x0000FFFF) /*!< Write Protect */
+
+/*----------------------------------------------------------------------------*/
+
+/****************** Bit definition for OB_RDP register **********************/
+#define OB_RDP_RDP ((uint32_t)0x000000FF) /*!< Read protection option byte */
+#define OB_RDP_nRDP ((uint32_t)0x0000FF00) /*!< Read protection complemented option byte */
+
+/****************** Bit definition for OB_USER register *********************/
+#define OB_USER_USER ((uint32_t)0x00FF0000) /*!< User option byte */
+#define OB_USER_nUSER ((uint32_t)0xFF000000) /*!< User complemented option byte */
+
+/****************** Bit definition for OB_WRP0 register *********************/
+#define OB_WRP0_WRP0 ((uint32_t)0x000000FF) /*!< Flash memory write protection option bytes */
+#define OB_WRP0_nWRP0 ((uint32_t)0x0000FF00) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for OB_WRP1 register *********************/
+#define OB_WRP1_WRP1 ((uint32_t)0x00FF0000) /*!< Flash memory write protection option bytes */
+#define OB_WRP1_nWRP1 ((uint32_t)0xFF000000) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for OB_WRP2 register *********************/
+#define OB_WRP2_WRP2 ((uint32_t)0x000000FF) /*!< Flash memory write protection option bytes */
+#define OB_WRP2_nWRP2 ((uint32_t)0x0000FF00) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for OB_WRP3 register *********************/
+#define OB_WRP3_WRP3 ((uint32_t)0x00FF0000) /*!< Flash memory write protection option bytes */
+#define OB_WRP3_nWRP3 ((uint32_t)0xFF000000) /*!< Flash memory write protection complemented option bytes */
+
+/******************************************************************************/
+/* */
+/* General Purpose IOs (GPIO) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for GPIO_MODER register *****************/
+#define GPIO_MODER_MODER0 ((uint32_t)0x00000003)
+#define GPIO_MODER_MODER0_0 ((uint32_t)0x00000001)
+#define GPIO_MODER_MODER0_1 ((uint32_t)0x00000002)
+#define GPIO_MODER_MODER1 ((uint32_t)0x0000000C)
+#define GPIO_MODER_MODER1_0 ((uint32_t)0x00000004)
+#define GPIO_MODER_MODER1_1 ((uint32_t)0x00000008)
+#define GPIO_MODER_MODER2 ((uint32_t)0x00000030)
+#define GPIO_MODER_MODER2_0 ((uint32_t)0x00000010)
+#define GPIO_MODER_MODER2_1 ((uint32_t)0x00000020)
+#define GPIO_MODER_MODER3 ((uint32_t)0x000000C0)
+#define GPIO_MODER_MODER3_0 ((uint32_t)0x00000040)
+#define GPIO_MODER_MODER3_1 ((uint32_t)0x00000080)
+#define GPIO_MODER_MODER4 ((uint32_t)0x00000300)
+#define GPIO_MODER_MODER4_0 ((uint32_t)0x00000100)
+#define GPIO_MODER_MODER4_1 ((uint32_t)0x00000200)
+#define GPIO_MODER_MODER5 ((uint32_t)0x00000C00)
+#define GPIO_MODER_MODER5_0 ((uint32_t)0x00000400)
+#define GPIO_MODER_MODER5_1 ((uint32_t)0x00000800)
+#define GPIO_MODER_MODER6 ((uint32_t)0x00003000)
+#define GPIO_MODER_MODER6_0 ((uint32_t)0x00001000)
+#define GPIO_MODER_MODER6_1 ((uint32_t)0x00002000)
+#define GPIO_MODER_MODER7 ((uint32_t)0x0000C000)
+#define GPIO_MODER_MODER7_0 ((uint32_t)0x00004000)
+#define GPIO_MODER_MODER7_1 ((uint32_t)0x00008000)
+#define GPIO_MODER_MODER8 ((uint32_t)0x00030000)
+#define GPIO_MODER_MODER8_0 ((uint32_t)0x00010000)
+#define GPIO_MODER_MODER8_1 ((uint32_t)0x00020000)
+#define GPIO_MODER_MODER9 ((uint32_t)0x000C0000)
+#define GPIO_MODER_MODER9_0 ((uint32_t)0x00040000)
+#define GPIO_MODER_MODER9_1 ((uint32_t)0x00080000)
+#define GPIO_MODER_MODER10 ((uint32_t)0x00300000)
+#define GPIO_MODER_MODER10_0 ((uint32_t)0x00100000)
+#define GPIO_MODER_MODER10_1 ((uint32_t)0x00200000)
+#define GPIO_MODER_MODER11 ((uint32_t)0x00C00000)
+#define GPIO_MODER_MODER11_0 ((uint32_t)0x00400000)
+#define GPIO_MODER_MODER11_1 ((uint32_t)0x00800000)
+#define GPIO_MODER_MODER12 ((uint32_t)0x03000000)
+#define GPIO_MODER_MODER12_0 ((uint32_t)0x01000000)
+#define GPIO_MODER_MODER12_1 ((uint32_t)0x02000000)
+#define GPIO_MODER_MODER13 ((uint32_t)0x0C000000)
+#define GPIO_MODER_MODER13_0 ((uint32_t)0x04000000)
+#define GPIO_MODER_MODER13_1 ((uint32_t)0x08000000)
+#define GPIO_MODER_MODER14 ((uint32_t)0x30000000)
+#define GPIO_MODER_MODER14_0 ((uint32_t)0x10000000)
+#define GPIO_MODER_MODER14_1 ((uint32_t)0x20000000)
+#define GPIO_MODER_MODER15 ((uint32_t)0xC0000000)
+#define GPIO_MODER_MODER15_0 ((uint32_t)0x40000000)
+#define GPIO_MODER_MODER15_1 ((uint32_t)0x80000000)
+
+/****************** Bit definition for GPIO_OTYPER register *****************/
+#define GPIO_OTYPER_OT_0 ((uint32_t)0x00000001)
+#define GPIO_OTYPER_OT_1 ((uint32_t)0x00000002)
+#define GPIO_OTYPER_OT_2 ((uint32_t)0x00000004)
+#define GPIO_OTYPER_OT_3 ((uint32_t)0x00000008)
+#define GPIO_OTYPER_OT_4 ((uint32_t)0x00000010)
+#define GPIO_OTYPER_OT_5 ((uint32_t)0x00000020)
+#define GPIO_OTYPER_OT_6 ((uint32_t)0x00000040)
+#define GPIO_OTYPER_OT_7 ((uint32_t)0x00000080)
+#define GPIO_OTYPER_OT_8 ((uint32_t)0x00000100)
+#define GPIO_OTYPER_OT_9 ((uint32_t)0x00000200)
+#define GPIO_OTYPER_OT_10 ((uint32_t)0x00000400)
+#define GPIO_OTYPER_OT_11 ((uint32_t)0x00000800)
+#define GPIO_OTYPER_OT_12 ((uint32_t)0x00001000)
+#define GPIO_OTYPER_OT_13 ((uint32_t)0x00002000)
+#define GPIO_OTYPER_OT_14 ((uint32_t)0x00004000)
+#define GPIO_OTYPER_OT_15 ((uint32_t)0x00008000)
+
+/**************** Bit definition for GPIO_OSPEEDR register ******************/
+#define GPIO_OSPEEDR_OSPEEDR0 ((uint32_t)0x00000003)
+#define GPIO_OSPEEDR_OSPEEDR0_0 ((uint32_t)0x00000001)
+#define GPIO_OSPEEDR_OSPEEDR0_1 ((uint32_t)0x00000002)
+#define GPIO_OSPEEDR_OSPEEDR1 ((uint32_t)0x0000000C)
+#define GPIO_OSPEEDR_OSPEEDR1_0 ((uint32_t)0x00000004)
+#define GPIO_OSPEEDR_OSPEEDR1_1 ((uint32_t)0x00000008)
+#define GPIO_OSPEEDR_OSPEEDR2 ((uint32_t)0x00000030)
+#define GPIO_OSPEEDR_OSPEEDR2_0 ((uint32_t)0x00000010)
+#define GPIO_OSPEEDR_OSPEEDR2_1 ((uint32_t)0x00000020)
+#define GPIO_OSPEEDR_OSPEEDR3 ((uint32_t)0x000000C0)
+#define GPIO_OSPEEDR_OSPEEDR3_0 ((uint32_t)0x00000040)
+#define GPIO_OSPEEDR_OSPEEDR3_1 ((uint32_t)0x00000080)
+#define GPIO_OSPEEDR_OSPEEDR4 ((uint32_t)0x00000300)
+#define GPIO_OSPEEDR_OSPEEDR4_0 ((uint32_t)0x00000100)
+#define GPIO_OSPEEDR_OSPEEDR4_1 ((uint32_t)0x00000200)
+#define GPIO_OSPEEDR_OSPEEDR5 ((uint32_t)0x00000C00)
+#define GPIO_OSPEEDR_OSPEEDR5_0 ((uint32_t)0x00000400)
+#define GPIO_OSPEEDR_OSPEEDR5_1 ((uint32_t)0x00000800)
+#define GPIO_OSPEEDR_OSPEEDR6 ((uint32_t)0x00003000)
+#define GPIO_OSPEEDR_OSPEEDR6_0 ((uint32_t)0x00001000)
+#define GPIO_OSPEEDR_OSPEEDR6_1 ((uint32_t)0x00002000)
+#define GPIO_OSPEEDR_OSPEEDR7 ((uint32_t)0x0000C000)
+#define GPIO_OSPEEDR_OSPEEDR7_0 ((uint32_t)0x00004000)
+#define GPIO_OSPEEDR_OSPEEDR7_1 ((uint32_t)0x00008000)
+#define GPIO_OSPEEDR_OSPEEDR8 ((uint32_t)0x00030000)
+#define GPIO_OSPEEDR_OSPEEDR8_0 ((uint32_t)0x00010000)
+#define GPIO_OSPEEDR_OSPEEDR8_1 ((uint32_t)0x00020000)
+#define GPIO_OSPEEDR_OSPEEDR9 ((uint32_t)0x000C0000)
+#define GPIO_OSPEEDR_OSPEEDR9_0 ((uint32_t)0x00040000)
+#define GPIO_OSPEEDR_OSPEEDR9_1 ((uint32_t)0x00080000)
+#define GPIO_OSPEEDR_OSPEEDR10 ((uint32_t)0x00300000)
+#define GPIO_OSPEEDR_OSPEEDR10_0 ((uint32_t)0x00100000)
+#define GPIO_OSPEEDR_OSPEEDR10_1 ((uint32_t)0x00200000)
+#define GPIO_OSPEEDR_OSPEEDR11 ((uint32_t)0x00C00000)
+#define GPIO_OSPEEDR_OSPEEDR11_0 ((uint32_t)0x00400000)
+#define GPIO_OSPEEDR_OSPEEDR11_1 ((uint32_t)0x00800000)
+#define GPIO_OSPEEDR_OSPEEDR12 ((uint32_t)0x03000000)
+#define GPIO_OSPEEDR_OSPEEDR12_0 ((uint32_t)0x01000000)
+#define GPIO_OSPEEDR_OSPEEDR12_1 ((uint32_t)0x02000000)
+#define GPIO_OSPEEDR_OSPEEDR13 ((uint32_t)0x0C000000)
+#define GPIO_OSPEEDR_OSPEEDR13_0 ((uint32_t)0x04000000)
+#define GPIO_OSPEEDR_OSPEEDR13_1 ((uint32_t)0x08000000)
+#define GPIO_OSPEEDR_OSPEEDR14 ((uint32_t)0x30000000)
+#define GPIO_OSPEEDR_OSPEEDR14_0 ((uint32_t)0x10000000)
+#define GPIO_OSPEEDR_OSPEEDR14_1 ((uint32_t)0x20000000)
+#define GPIO_OSPEEDR_OSPEEDR15 ((uint32_t)0xC0000000)
+#define GPIO_OSPEEDR_OSPEEDR15_0 ((uint32_t)0x40000000)
+#define GPIO_OSPEEDR_OSPEEDR15_1 ((uint32_t)0x80000000)
+
+/* Old Bit definition for GPIO_OSPEEDR register maintained for legacy purpose */
+#define GPIO_OSPEEDER_OSPEEDR0 GPIO_OSPEEDR_OSPEEDR0
+#define GPIO_OSPEEDER_OSPEEDR0_0 GPIO_OSPEEDR_OSPEEDR0_0
+#define GPIO_OSPEEDER_OSPEEDR0_1 GPIO_OSPEEDR_OSPEEDR0_1
+#define GPIO_OSPEEDER_OSPEEDR1 GPIO_OSPEEDR_OSPEEDR1
+#define GPIO_OSPEEDER_OSPEEDR1_0 GPIO_OSPEEDR_OSPEEDR1_0
+#define GPIO_OSPEEDER_OSPEEDR1_1 GPIO_OSPEEDR_OSPEEDR1_1
+#define GPIO_OSPEEDER_OSPEEDR2 GPIO_OSPEEDR_OSPEEDR2
+#define GPIO_OSPEEDER_OSPEEDR2_0 GPIO_OSPEEDR_OSPEEDR2_0
+#define GPIO_OSPEEDER_OSPEEDR2_1 GPIO_OSPEEDR_OSPEEDR2_1
+#define GPIO_OSPEEDER_OSPEEDR3 GPIO_OSPEEDR_OSPEEDR3
+#define GPIO_OSPEEDER_OSPEEDR3_0 GPIO_OSPEEDR_OSPEEDR3_0
+#define GPIO_OSPEEDER_OSPEEDR3_1 GPIO_OSPEEDR_OSPEEDR3_1
+#define GPIO_OSPEEDER_OSPEEDR4 GPIO_OSPEEDR_OSPEEDR4
+#define GPIO_OSPEEDER_OSPEEDR4_0 GPIO_OSPEEDR_OSPEEDR4_0
+#define GPIO_OSPEEDER_OSPEEDR4_1 GPIO_OSPEEDR_OSPEEDR4_1
+#define GPIO_OSPEEDER_OSPEEDR5 GPIO_OSPEEDR_OSPEEDR5
+#define GPIO_OSPEEDER_OSPEEDR5_0 GPIO_OSPEEDR_OSPEEDR5_0
+#define GPIO_OSPEEDER_OSPEEDR5_1 GPIO_OSPEEDR_OSPEEDR5_1
+#define GPIO_OSPEEDER_OSPEEDR6 GPIO_OSPEEDR_OSPEEDR6
+#define GPIO_OSPEEDER_OSPEEDR6_0 GPIO_OSPEEDR_OSPEEDR6_0
+#define GPIO_OSPEEDER_OSPEEDR6_1 GPIO_OSPEEDR_OSPEEDR6_1
+#define GPIO_OSPEEDER_OSPEEDR7 GPIO_OSPEEDR_OSPEEDR7
+#define GPIO_OSPEEDER_OSPEEDR7_0 GPIO_OSPEEDR_OSPEEDR7_0
+#define GPIO_OSPEEDER_OSPEEDR7_1 GPIO_OSPEEDR_OSPEEDR7_1
+#define GPIO_OSPEEDER_OSPEEDR8 GPIO_OSPEEDR_OSPEEDR8
+#define GPIO_OSPEEDER_OSPEEDR8_0 GPIO_OSPEEDR_OSPEEDR8_0
+#define GPIO_OSPEEDER_OSPEEDR8_1 GPIO_OSPEEDR_OSPEEDR8_1
+#define GPIO_OSPEEDER_OSPEEDR9 GPIO_OSPEEDR_OSPEEDR9
+#define GPIO_OSPEEDER_OSPEEDR9_0 GPIO_OSPEEDR_OSPEEDR9_0
+#define GPIO_OSPEEDER_OSPEEDR9_1 GPIO_OSPEEDR_OSPEEDR9_1
+#define GPIO_OSPEEDER_OSPEEDR10 GPIO_OSPEEDR_OSPEEDR10
+#define GPIO_OSPEEDER_OSPEEDR10_0 GPIO_OSPEEDR_OSPEEDR10_0
+#define GPIO_OSPEEDER_OSPEEDR10_1 GPIO_OSPEEDR_OSPEEDR10_1
+#define GPIO_OSPEEDER_OSPEEDR11 GPIO_OSPEEDR_OSPEEDR11
+#define GPIO_OSPEEDER_OSPEEDR11_0 GPIO_OSPEEDR_OSPEEDR11_0
+#define GPIO_OSPEEDER_OSPEEDR11_1 GPIO_OSPEEDR_OSPEEDR11_1
+#define GPIO_OSPEEDER_OSPEEDR12 GPIO_OSPEEDR_OSPEEDR12
+#define GPIO_OSPEEDER_OSPEEDR12_0 GPIO_OSPEEDR_OSPEEDR12_0
+#define GPIO_OSPEEDER_OSPEEDR12_1 GPIO_OSPEEDR_OSPEEDR12_1
+#define GPIO_OSPEEDER_OSPEEDR13 GPIO_OSPEEDR_OSPEEDR13
+#define GPIO_OSPEEDER_OSPEEDR13_0 GPIO_OSPEEDR_OSPEEDR13_0
+#define GPIO_OSPEEDER_OSPEEDR13_1 GPIO_OSPEEDR_OSPEEDR13_1
+#define GPIO_OSPEEDER_OSPEEDR14 GPIO_OSPEEDR_OSPEEDR14
+#define GPIO_OSPEEDER_OSPEEDR14_0 GPIO_OSPEEDR_OSPEEDR14_0
+#define GPIO_OSPEEDER_OSPEEDR14_1 GPIO_OSPEEDR_OSPEEDR14_1
+#define GPIO_OSPEEDER_OSPEEDR15 GPIO_OSPEEDR_OSPEEDR15
+#define GPIO_OSPEEDER_OSPEEDR15_0 GPIO_OSPEEDR_OSPEEDR15_0
+#define GPIO_OSPEEDER_OSPEEDR15_1 GPIO_OSPEEDR_OSPEEDR15_1
+
+/******************* Bit definition for GPIO_PUPDR register ******************/
+#define GPIO_PUPDR_PUPDR0 ((uint32_t)0x00000003)
+#define GPIO_PUPDR_PUPDR0_0 ((uint32_t)0x00000001)
+#define GPIO_PUPDR_PUPDR0_1 ((uint32_t)0x00000002)
+#define GPIO_PUPDR_PUPDR1 ((uint32_t)0x0000000C)
+#define GPIO_PUPDR_PUPDR1_0 ((uint32_t)0x00000004)
+#define GPIO_PUPDR_PUPDR1_1 ((uint32_t)0x00000008)
+#define GPIO_PUPDR_PUPDR2 ((uint32_t)0x00000030)
+#define GPIO_PUPDR_PUPDR2_0 ((uint32_t)0x00000010)
+#define GPIO_PUPDR_PUPDR2_1 ((uint32_t)0x00000020)
+#define GPIO_PUPDR_PUPDR3 ((uint32_t)0x000000C0)
+#define GPIO_PUPDR_PUPDR3_0 ((uint32_t)0x00000040)
+#define GPIO_PUPDR_PUPDR3_1 ((uint32_t)0x00000080)
+#define GPIO_PUPDR_PUPDR4 ((uint32_t)0x00000300)
+#define GPIO_PUPDR_PUPDR4_0 ((uint32_t)0x00000100)
+#define GPIO_PUPDR_PUPDR4_1 ((uint32_t)0x00000200)
+#define GPIO_PUPDR_PUPDR5 ((uint32_t)0x00000C00)
+#define GPIO_PUPDR_PUPDR5_0 ((uint32_t)0x00000400)
+#define GPIO_PUPDR_PUPDR5_1 ((uint32_t)0x00000800)
+#define GPIO_PUPDR_PUPDR6 ((uint32_t)0x00003000)
+#define GPIO_PUPDR_PUPDR6_0 ((uint32_t)0x00001000)
+#define GPIO_PUPDR_PUPDR6_1 ((uint32_t)0x00002000)
+#define GPIO_PUPDR_PUPDR7 ((uint32_t)0x0000C000)
+#define GPIO_PUPDR_PUPDR7_0 ((uint32_t)0x00004000)
+#define GPIO_PUPDR_PUPDR7_1 ((uint32_t)0x00008000)
+#define GPIO_PUPDR_PUPDR8 ((uint32_t)0x00030000)
+#define GPIO_PUPDR_PUPDR8_0 ((uint32_t)0x00010000)
+#define GPIO_PUPDR_PUPDR8_1 ((uint32_t)0x00020000)
+#define GPIO_PUPDR_PUPDR9 ((uint32_t)0x000C0000)
+#define GPIO_PUPDR_PUPDR9_0 ((uint32_t)0x00040000)
+#define GPIO_PUPDR_PUPDR9_1 ((uint32_t)0x00080000)
+#define GPIO_PUPDR_PUPDR10 ((uint32_t)0x00300000)
+#define GPIO_PUPDR_PUPDR10_0 ((uint32_t)0x00100000)
+#define GPIO_PUPDR_PUPDR10_1 ((uint32_t)0x00200000)
+#define GPIO_PUPDR_PUPDR11 ((uint32_t)0x00C00000)
+#define GPIO_PUPDR_PUPDR11_0 ((uint32_t)0x00400000)
+#define GPIO_PUPDR_PUPDR11_1 ((uint32_t)0x00800000)
+#define GPIO_PUPDR_PUPDR12 ((uint32_t)0x03000000)
+#define GPIO_PUPDR_PUPDR12_0 ((uint32_t)0x01000000)
+#define GPIO_PUPDR_PUPDR12_1 ((uint32_t)0x02000000)
+#define GPIO_PUPDR_PUPDR13 ((uint32_t)0x0C000000)
+#define GPIO_PUPDR_PUPDR13_0 ((uint32_t)0x04000000)
+#define GPIO_PUPDR_PUPDR13_1 ((uint32_t)0x08000000)
+#define GPIO_PUPDR_PUPDR14 ((uint32_t)0x30000000)
+#define GPIO_PUPDR_PUPDR14_0 ((uint32_t)0x10000000)
+#define GPIO_PUPDR_PUPDR14_1 ((uint32_t)0x20000000)
+#define GPIO_PUPDR_PUPDR15 ((uint32_t)0xC0000000)
+#define GPIO_PUPDR_PUPDR15_0 ((uint32_t)0x40000000)
+#define GPIO_PUPDR_PUPDR15_1 ((uint32_t)0x80000000)
+
+/******************* Bit definition for GPIO_IDR register *******************/
+#define GPIO_IDR_0 ((uint32_t)0x00000001)
+#define GPIO_IDR_1 ((uint32_t)0x00000002)
+#define GPIO_IDR_2 ((uint32_t)0x00000004)
+#define GPIO_IDR_3 ((uint32_t)0x00000008)
+#define GPIO_IDR_4 ((uint32_t)0x00000010)
+#define GPIO_IDR_5 ((uint32_t)0x00000020)
+#define GPIO_IDR_6 ((uint32_t)0x00000040)
+#define GPIO_IDR_7 ((uint32_t)0x00000080)
+#define GPIO_IDR_8 ((uint32_t)0x00000100)
+#define GPIO_IDR_9 ((uint32_t)0x00000200)
+#define GPIO_IDR_10 ((uint32_t)0x00000400)
+#define GPIO_IDR_11 ((uint32_t)0x00000800)
+#define GPIO_IDR_12 ((uint32_t)0x00001000)
+#define GPIO_IDR_13 ((uint32_t)0x00002000)
+#define GPIO_IDR_14 ((uint32_t)0x00004000)
+#define GPIO_IDR_15 ((uint32_t)0x00008000)
+
+/****************** Bit definition for GPIO_ODR register ********************/
+#define GPIO_ODR_0 ((uint32_t)0x00000001)
+#define GPIO_ODR_1 ((uint32_t)0x00000002)
+#define GPIO_ODR_2 ((uint32_t)0x00000004)
+#define GPIO_ODR_3 ((uint32_t)0x00000008)
+#define GPIO_ODR_4 ((uint32_t)0x00000010)
+#define GPIO_ODR_5 ((uint32_t)0x00000020)
+#define GPIO_ODR_6 ((uint32_t)0x00000040)
+#define GPIO_ODR_7 ((uint32_t)0x00000080)
+#define GPIO_ODR_8 ((uint32_t)0x00000100)
+#define GPIO_ODR_9 ((uint32_t)0x00000200)
+#define GPIO_ODR_10 ((uint32_t)0x00000400)
+#define GPIO_ODR_11 ((uint32_t)0x00000800)
+#define GPIO_ODR_12 ((uint32_t)0x00001000)
+#define GPIO_ODR_13 ((uint32_t)0x00002000)
+#define GPIO_ODR_14 ((uint32_t)0x00004000)
+#define GPIO_ODR_15 ((uint32_t)0x00008000)
+
+/****************** Bit definition for GPIO_BSRR register ********************/
+#define GPIO_BSRR_BS_0 ((uint32_t)0x00000001)
+#define GPIO_BSRR_BS_1 ((uint32_t)0x00000002)
+#define GPIO_BSRR_BS_2 ((uint32_t)0x00000004)
+#define GPIO_BSRR_BS_3 ((uint32_t)0x00000008)
+#define GPIO_BSRR_BS_4 ((uint32_t)0x00000010)
+#define GPIO_BSRR_BS_5 ((uint32_t)0x00000020)
+#define GPIO_BSRR_BS_6 ((uint32_t)0x00000040)
+#define GPIO_BSRR_BS_7 ((uint32_t)0x00000080)
+#define GPIO_BSRR_BS_8 ((uint32_t)0x00000100)
+#define GPIO_BSRR_BS_9 ((uint32_t)0x00000200)
+#define GPIO_BSRR_BS_10 ((uint32_t)0x00000400)
+#define GPIO_BSRR_BS_11 ((uint32_t)0x00000800)
+#define GPIO_BSRR_BS_12 ((uint32_t)0x00001000)
+#define GPIO_BSRR_BS_13 ((uint32_t)0x00002000)
+#define GPIO_BSRR_BS_14 ((uint32_t)0x00004000)
+#define GPIO_BSRR_BS_15 ((uint32_t)0x00008000)
+#define GPIO_BSRR_BR_0 ((uint32_t)0x00010000)
+#define GPIO_BSRR_BR_1 ((uint32_t)0x00020000)
+#define GPIO_BSRR_BR_2 ((uint32_t)0x00040000)
+#define GPIO_BSRR_BR_3 ((uint32_t)0x00080000)
+#define GPIO_BSRR_BR_4 ((uint32_t)0x00100000)
+#define GPIO_BSRR_BR_5 ((uint32_t)0x00200000)
+#define GPIO_BSRR_BR_6 ((uint32_t)0x00400000)
+#define GPIO_BSRR_BR_7 ((uint32_t)0x00800000)
+#define GPIO_BSRR_BR_8 ((uint32_t)0x01000000)
+#define GPIO_BSRR_BR_9 ((uint32_t)0x02000000)
+#define GPIO_BSRR_BR_10 ((uint32_t)0x04000000)
+#define GPIO_BSRR_BR_11 ((uint32_t)0x08000000)
+#define GPIO_BSRR_BR_12 ((uint32_t)0x10000000)
+#define GPIO_BSRR_BR_13 ((uint32_t)0x20000000)
+#define GPIO_BSRR_BR_14 ((uint32_t)0x40000000)
+#define GPIO_BSRR_BR_15 ((uint32_t)0x80000000)
+
+/****************** Bit definition for GPIO_LCKR register ********************/
+#define GPIO_LCKR_LCK0 ((uint32_t)0x00000001)
+#define GPIO_LCKR_LCK1 ((uint32_t)0x00000002)
+#define GPIO_LCKR_LCK2 ((uint32_t)0x00000004)
+#define GPIO_LCKR_LCK3 ((uint32_t)0x00000008)
+#define GPIO_LCKR_LCK4 ((uint32_t)0x00000010)
+#define GPIO_LCKR_LCK5 ((uint32_t)0x00000020)
+#define GPIO_LCKR_LCK6 ((uint32_t)0x00000040)
+#define GPIO_LCKR_LCK7 ((uint32_t)0x00000080)
+#define GPIO_LCKR_LCK8 ((uint32_t)0x00000100)
+#define GPIO_LCKR_LCK9 ((uint32_t)0x00000200)
+#define GPIO_LCKR_LCK10 ((uint32_t)0x00000400)
+#define GPIO_LCKR_LCK11 ((uint32_t)0x00000800)
+#define GPIO_LCKR_LCK12 ((uint32_t)0x00001000)
+#define GPIO_LCKR_LCK13 ((uint32_t)0x00002000)
+#define GPIO_LCKR_LCK14 ((uint32_t)0x00004000)
+#define GPIO_LCKR_LCK15 ((uint32_t)0x00008000)
+#define GPIO_LCKR_LCKK ((uint32_t)0x00010000)
+
+/****************** Bit definition for GPIO_AFRL register ********************/
+#define GPIO_AFRL_AFRL0 ((uint32_t)0x0000000F)
+#define GPIO_AFRL_AFRL1 ((uint32_t)0x000000F0)
+#define GPIO_AFRL_AFRL2 ((uint32_t)0x00000F00)
+#define GPIO_AFRL_AFRL3 ((uint32_t)0x0000F000)
+#define GPIO_AFRL_AFRL4 ((uint32_t)0x000F0000)
+#define GPIO_AFRL_AFRL5 ((uint32_t)0x00F00000)
+#define GPIO_AFRL_AFRL6 ((uint32_t)0x0F000000)
+#define GPIO_AFRL_AFRL7 ((uint32_t)0xF0000000)
+
+/****************** Bit definition for GPIO_AFRH register ********************/
+#define GPIO_AFRH_AFRH0 ((uint32_t)0x0000000F)
+#define GPIO_AFRH_AFRH1 ((uint32_t)0x000000F0)
+#define GPIO_AFRH_AFRH2 ((uint32_t)0x00000F00)
+#define GPIO_AFRH_AFRH3 ((uint32_t)0x0000F000)
+#define GPIO_AFRH_AFRH4 ((uint32_t)0x000F0000)
+#define GPIO_AFRH_AFRH5 ((uint32_t)0x00F00000)
+#define GPIO_AFRH_AFRH6 ((uint32_t)0x0F000000)
+#define GPIO_AFRH_AFRH7 ((uint32_t)0xF0000000)
+
+/****************** Bit definition for GPIO_BRR register *********************/
+#define GPIO_BRR_BR_0 ((uint32_t)0x00000001)
+#define GPIO_BRR_BR_1 ((uint32_t)0x00000002)
+#define GPIO_BRR_BR_2 ((uint32_t)0x00000004)
+#define GPIO_BRR_BR_3 ((uint32_t)0x00000008)
+#define GPIO_BRR_BR_4 ((uint32_t)0x00000010)
+#define GPIO_BRR_BR_5 ((uint32_t)0x00000020)
+#define GPIO_BRR_BR_6 ((uint32_t)0x00000040)
+#define GPIO_BRR_BR_7 ((uint32_t)0x00000080)
+#define GPIO_BRR_BR_8 ((uint32_t)0x00000100)
+#define GPIO_BRR_BR_9 ((uint32_t)0x00000200)
+#define GPIO_BRR_BR_10 ((uint32_t)0x00000400)
+#define GPIO_BRR_BR_11 ((uint32_t)0x00000800)
+#define GPIO_BRR_BR_12 ((uint32_t)0x00001000)
+#define GPIO_BRR_BR_13 ((uint32_t)0x00002000)
+#define GPIO_BRR_BR_14 ((uint32_t)0x00004000)
+#define GPIO_BRR_BR_15 ((uint32_t)0x00008000)
+
+/******************************************************************************/
+/* */
+/* Inter-integrated Circuit Interface (I2C) */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for I2C_CR1 register *******************/
+#define I2C_CR1_PE ((uint32_t)0x00000001) /*!< Peripheral enable */
+#define I2C_CR1_TXIE ((uint32_t)0x00000002) /*!< TX interrupt enable */
+#define I2C_CR1_RXIE ((uint32_t)0x00000004) /*!< RX interrupt enable */
+#define I2C_CR1_ADDRIE ((uint32_t)0x00000008) /*!< Address match interrupt enable */
+#define I2C_CR1_NACKIE ((uint32_t)0x00000010) /*!< NACK received interrupt enable */
+#define I2C_CR1_STOPIE ((uint32_t)0x00000020) /*!< STOP detection interrupt enable */
+#define I2C_CR1_TCIE ((uint32_t)0x00000040) /*!< Transfer complete interrupt enable */
+#define I2C_CR1_ERRIE ((uint32_t)0x00000080) /*!< Errors interrupt enable */
+#define I2C_CR1_DFN ((uint32_t)0x00000F00) /*!< Digital noise filter */
+#define I2C_CR1_ANFOFF ((uint32_t)0x00001000) /*!< Analog noise filter OFF */
+#define I2C_CR1_SWRST ((uint32_t)0x00002000) /*!< Software reset */
+#define I2C_CR1_TXDMAEN ((uint32_t)0x00004000) /*!< DMA transmission requests enable */
+#define I2C_CR1_RXDMAEN ((uint32_t)0x00008000) /*!< DMA reception requests enable */
+#define I2C_CR1_SBC ((uint32_t)0x00010000) /*!< Slave byte control */
+#define I2C_CR1_NOSTRETCH ((uint32_t)0x00020000) /*!< Clock stretching disable */
+#define I2C_CR1_WUPEN ((uint32_t)0x00040000) /*!< Wakeup from STOP enable */
+#define I2C_CR1_GCEN ((uint32_t)0x00080000) /*!< General call enable */
+#define I2C_CR1_SMBHEN ((uint32_t)0x00100000) /*!< SMBus host address enable */
+#define I2C_CR1_SMBDEN ((uint32_t)0x00200000) /*!< SMBus device default address enable */
+#define I2C_CR1_ALERTEN ((uint32_t)0x00400000) /*!< SMBus alert enable */
+#define I2C_CR1_PECEN ((uint32_t)0x00800000) /*!< PEC enable */
+
+/****************** Bit definition for I2C_CR2 register ********************/
+#define I2C_CR2_SADD ((uint32_t)0x000003FF) /*!< Slave address (master mode) */
+#define I2C_CR2_RD_WRN ((uint32_t)0x00000400) /*!< Transfer direction (master mode) */
+#define I2C_CR2_ADD10 ((uint32_t)0x00000800) /*!< 10-bit addressing mode (master mode) */
+#define I2C_CR2_HEAD10R ((uint32_t)0x00001000) /*!< 10-bit address header only read direction (master mode) */
+#define I2C_CR2_START ((uint32_t)0x00002000) /*!< START generation */
+#define I2C_CR2_STOP ((uint32_t)0x00004000) /*!< STOP generation (master mode) */
+#define I2C_CR2_NACK ((uint32_t)0x00008000) /*!< NACK generation (slave mode) */
+#define I2C_CR2_NBYTES ((uint32_t)0x00FF0000) /*!< Number of bytes */
+#define I2C_CR2_RELOAD ((uint32_t)0x01000000) /*!< NBYTES reload mode */
+#define I2C_CR2_AUTOEND ((uint32_t)0x02000000) /*!< Automatic end mode (master mode) */
+#define I2C_CR2_PECBYTE ((uint32_t)0x04000000) /*!< Packet error checking byte */
+
+/******************* Bit definition for I2C_OAR1 register ******************/
+#define I2C_OAR1_OA1 ((uint32_t)0x000003FF) /*!< Interface own address 1 */
+#define I2C_OAR1_OA1MODE ((uint32_t)0x00000400) /*!< Own address 1 10-bit mode */
+#define I2C_OAR1_OA1EN ((uint32_t)0x00008000) /*!< Own address 1 enable */
+
+/******************* Bit definition for I2C_OAR2 register ******************/
+#define I2C_OAR2_OA2 ((uint32_t)0x000000FE) /*!< Interface own address 2 */
+#define I2C_OAR2_OA2MSK ((uint32_t)0x00000700) /*!< Own address 2 masks */
+#define I2C_OAR2_OA2EN ((uint32_t)0x00008000) /*!< Own address 2 enable */
+
+/******************* Bit definition for I2C_TIMINGR register ****************/
+#define I2C_TIMINGR_SCLL ((uint32_t)0x000000FF) /*!< SCL low period (master mode) */
+#define I2C_TIMINGR_SCLH ((uint32_t)0x0000FF00) /*!< SCL high period (master mode) */
+#define I2C_TIMINGR_SDADEL ((uint32_t)0x000F0000) /*!< Data hold time */
+#define I2C_TIMINGR_SCLDEL ((uint32_t)0x00F00000) /*!< Data setup time */
+#define I2C_TIMINGR_PRESC ((uint32_t)0xF0000000) /*!< Timings prescaler */
+
+/******************* Bit definition for I2C_TIMEOUTR register ****************/
+#define I2C_TIMEOUTR_TIMEOUTA ((uint32_t)0x00000FFF) /*!< Bus timeout A */
+#define I2C_TIMEOUTR_TIDLE ((uint32_t)0x00001000) /*!< Idle clock timeout detection */
+#define I2C_TIMEOUTR_TIMOUTEN ((uint32_t)0x00008000) /*!< Clock timeout enable */
+#define I2C_TIMEOUTR_TIMEOUTB ((uint32_t)0x0FFF0000) /*!< Bus timeout B*/
+#define I2C_TIMEOUTR_TEXTEN ((uint32_t)0x80000000) /*!< Extended clock timeout enable */
+
+/****************** Bit definition for I2C_ISR register ********************/
+#define I2C_ISR_TXE ((uint32_t)0x00000001) /*!< Transmit data register empty */
+#define I2C_ISR_TXIS ((uint32_t)0x00000002) /*!< Transmit interrupt status */
+#define I2C_ISR_RXNE ((uint32_t)0x00000004) /*!< Receive data register not empty */
+#define I2C_ISR_ADDR ((uint32_t)0x00000008) /*!< Address matched (slave mode)*/
+#define I2C_ISR_NACKF ((uint32_t)0x00000010) /*!< NACK received flag */
+#define I2C_ISR_STOPF ((uint32_t)0x00000020) /*!< STOP detection flag */
+#define I2C_ISR_TC ((uint32_t)0x00000040) /*!< Transfer complete (master mode) */
+#define I2C_ISR_TCR ((uint32_t)0x00000080) /*!< Transfer complete reload */
+#define I2C_ISR_BERR ((uint32_t)0x00000100) /*!< Bus error */
+#define I2C_ISR_ARLO ((uint32_t)0x00000200) /*!< Arbitration lost */
+#define I2C_ISR_OVR ((uint32_t)0x00000400) /*!< Overrun/Underrun */
+#define I2C_ISR_PECERR ((uint32_t)0x00000800) /*!< PEC error in reception */
+#define I2C_ISR_TIMEOUT ((uint32_t)0x00001000) /*!< Timeout or Tlow detection flag */
+#define I2C_ISR_ALERT ((uint32_t)0x00002000) /*!< SMBus alert */
+#define I2C_ISR_BUSY ((uint32_t)0x00008000) /*!< Bus busy */
+#define I2C_ISR_DIR ((uint32_t)0x00010000) /*!< Transfer direction (slave mode) */
+#define I2C_ISR_ADDCODE ((uint32_t)0x00FE0000) /*!< Address match code (slave mode) */
+
+/****************** Bit definition for I2C_ICR register ********************/
+#define I2C_ICR_ADDRCF ((uint32_t)0x00000008) /*!< Address matched clear flag */
+#define I2C_ICR_NACKCF ((uint32_t)0x00000010) /*!< NACK clear flag */
+#define I2C_ICR_STOPCF ((uint32_t)0x00000020) /*!< STOP detection clear flag */
+#define I2C_ICR_BERRCF ((uint32_t)0x00000100) /*!< Bus error clear flag */
+#define I2C_ICR_ARLOCF ((uint32_t)0x00000200) /*!< Arbitration lost clear flag */
+#define I2C_ICR_OVRCF ((uint32_t)0x00000400) /*!< Overrun/Underrun clear flag */
+#define I2C_ICR_PECCF ((uint32_t)0x00000800) /*!< PAC error clear flag */
+#define I2C_ICR_TIMOUTCF ((uint32_t)0x00001000) /*!< Timeout clear flag */
+#define I2C_ICR_ALERTCF ((uint32_t)0x00002000) /*!< Alert clear flag */
+
+/****************** Bit definition for I2C_PECR register *******************/
+#define I2C_PECR_PEC ((uint32_t)0x000000FF) /*!< PEC register */
+
+/****************** Bit definition for I2C_RXDR register *********************/
+#define I2C_RXDR_RXDATA ((uint32_t)0x000000FF) /*!< 8-bit receive data */
+
+/****************** Bit definition for I2C_TXDR register *******************/
+#define I2C_TXDR_TXDATA ((uint32_t)0x000000FF) /*!< 8-bit transmit data */
+
+/*****************************************************************************/
+/* */
+/* Independent WATCHDOG (IWDG) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for IWDG_KR register *******************/
+#define IWDG_KR_KEY ((uint32_t)0xFFFF) /*!< Key value (write only, read 0000h) */
+
+/******************* Bit definition for IWDG_PR register *******************/
+#define IWDG_PR_PR ((uint32_t)0x07) /*!< PR[2:0] (Prescaler divider) */
+#define IWDG_PR_PR_0 ((uint32_t)0x01) /*!< Bit 0 */
+#define IWDG_PR_PR_1 ((uint32_t)0x02) /*!< Bit 1 */
+#define IWDG_PR_PR_2 ((uint32_t)0x04) /*!< Bit 2 */
+
+/******************* Bit definition for IWDG_RLR register ******************/
+#define IWDG_RLR_RL ((uint32_t)0x0FFF) /*!< Watchdog counter reload value */
+
+/******************* Bit definition for IWDG_SR register *******************/
+#define IWDG_SR_PVU ((uint32_t)0x01) /*!< Watchdog prescaler value update */
+#define IWDG_SR_RVU ((uint32_t)0x02) /*!< Watchdog counter reload value update */
+#define IWDG_SR_WVU ((uint32_t)0x04) /*!< Watchdog counter window value update */
+
+/******************* Bit definition for IWDG_KR register *******************/
+#define IWDG_WINR_WIN ((uint32_t)0x0FFF) /*!< Watchdog counter window value */
+
+/*****************************************************************************/
+/* */
+/* Power Control (PWR) */
+/* */
+/*****************************************************************************/
+
+/******************** Bit definition for PWR_CR register *******************/
+#define PWR_CR_LPDS ((uint32_t)0x00000001) /*!< Low-power Deepsleep */
+#define PWR_CR_PDDS ((uint32_t)0x00000002) /*!< Power Down Deepsleep */
+#define PWR_CR_CWUF ((uint32_t)0x00000004) /*!< Clear Wakeup Flag */
+#define PWR_CR_CSBF ((uint32_t)0x00000008) /*!< Clear Standby Flag */
+#define PWR_CR_PVDE ((uint32_t)0x00000010) /*!< Power Voltage Detector Enable */
+
+#define PWR_CR_PLS ((uint32_t)0x000000E0) /*!< PLS[2:0] bits (PVD Level Selection) */
+#define PWR_CR_PLS_0 ((uint32_t)0x00000020) /*!< Bit 0 */
+#define PWR_CR_PLS_1 ((uint32_t)0x00000040) /*!< Bit 1 */
+#define PWR_CR_PLS_2 ((uint32_t)0x00000080) /*!< Bit 2 */
+
+/*!< PVD level configuration */
+#define PWR_CR_PLS_LEV0 ((uint32_t)0x00000000) /*!< PVD level 0 */
+#define PWR_CR_PLS_LEV1 ((uint32_t)0x00000020) /*!< PVD level 1 */
+#define PWR_CR_PLS_LEV2 ((uint32_t)0x00000040) /*!< PVD level 2 */
+#define PWR_CR_PLS_LEV3 ((uint32_t)0x00000060) /*!< PVD level 3 */
+#define PWR_CR_PLS_LEV4 ((uint32_t)0x00000080) /*!< PVD level 4 */
+#define PWR_CR_PLS_LEV5 ((uint32_t)0x000000A0) /*!< PVD level 5 */
+#define PWR_CR_PLS_LEV6 ((uint32_t)0x000000C0) /*!< PVD level 6 */
+#define PWR_CR_PLS_LEV7 ((uint32_t)0x000000E0) /*!< PVD level 7 */
+
+#define PWR_CR_DBP ((uint32_t)0x00000100) /*!< Disable Backup Domain write protection */
+
+/******************* Bit definition for PWR_CSR register *******************/
+#define PWR_CSR_WUF ((uint32_t)0x00000001) /*!< Wakeup Flag */
+#define PWR_CSR_SBF ((uint32_t)0x00000002) /*!< Standby Flag */
+#define PWR_CSR_PVDO ((uint32_t)0x00000004) /*!< PVD Output */
+#define PWR_CSR_VREFINTRDYF ((uint32_t)0x00000008) /*!< Internal voltage reference (VREFINT) ready flag */
+
+#define PWR_CSR_EWUP1 ((uint32_t)0x00000100) /*!< Enable WKUP pin 1 */
+#define PWR_CSR_EWUP2 ((uint32_t)0x00000200) /*!< Enable WKUP pin 2 */
+#define PWR_CSR_EWUP3 ((uint32_t)0x00000400) /*!< Enable WKUP pin 3 */
+#define PWR_CSR_EWUP4 ((uint32_t)0x00000800) /*!< Enable WKUP pin 4 */
+#define PWR_CSR_EWUP5 ((uint32_t)0x00001000) /*!< Enable WKUP pin 5 */
+#define PWR_CSR_EWUP6 ((uint32_t)0x00002000) /*!< Enable WKUP pin 6 */
+#define PWR_CSR_EWUP7 ((uint32_t)0x00004000) /*!< Enable WKUP pin 7 */
+#define PWR_CSR_EWUP8 ((uint32_t)0x00008000) /*!< Enable WKUP pin 8 */
+
+/*****************************************************************************/
+/* */
+/* Reset and Clock Control */
+/* */
+/*****************************************************************************/
+
+/******************** Bit definition for RCC_CR register *******************/
+#define RCC_CR_HSION ((uint32_t)0x00000001) /*!< Internal High Speed clock enable */
+#define RCC_CR_HSIRDY ((uint32_t)0x00000002) /*!< Internal High Speed clock ready flag */
+
+#define RCC_CR_HSITRIM ((uint32_t)0x000000F8) /*!< Internal High Speed clock trimming */
+#define RCC_CR_HSITRIM_0 ((uint32_t)0x00000008) /*!<Bit 0 */
+#define RCC_CR_HSITRIM_1 ((uint32_t)0x00000010) /*!<Bit 1 */
+#define RCC_CR_HSITRIM_2 ((uint32_t)0x00000020) /*!<Bit 2 */
+#define RCC_CR_HSITRIM_3 ((uint32_t)0x00000040) /*!<Bit 3 */
+#define RCC_CR_HSITRIM_4 ((uint32_t)0x00000080) /*!<Bit 4 */
+
+#define RCC_CR_HSICAL ((uint32_t)0x0000FF00) /*!< Internal High Speed clock Calibration */
+#define RCC_CR_HSICAL_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define RCC_CR_HSICAL_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define RCC_CR_HSICAL_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define RCC_CR_HSICAL_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define RCC_CR_HSICAL_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+#define RCC_CR_HSICAL_5 ((uint32_t)0x00002000) /*!<Bit 5 */
+#define RCC_CR_HSICAL_6 ((uint32_t)0x00004000) /*!<Bit 6 */
+#define RCC_CR_HSICAL_7 ((uint32_t)0x00008000) /*!<Bit 7 */
+
+#define RCC_CR_HSEON ((uint32_t)0x00010000) /*!< External High Speed clock enable */
+#define RCC_CR_HSERDY ((uint32_t)0x00020000) /*!< External High Speed clock ready flag */
+#define RCC_CR_HSEBYP ((uint32_t)0x00040000) /*!< External High Speed clock Bypass */
+#define RCC_CR_CSSON ((uint32_t)0x00080000) /*!< Clock Security System enable */
+#define RCC_CR_PLLON ((uint32_t)0x01000000) /*!< PLL enable */
+#define RCC_CR_PLLRDY ((uint32_t)0x02000000) /*!< PLL clock ready flag */
+
+/******************** Bit definition for RCC_CFGR register *****************/
+/*!< SW configuration */
+#define RCC_CFGR_SW ((uint32_t)0x00000003) /*!< SW[1:0] bits (System clock Switch) */
+#define RCC_CFGR_SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR_SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+#define RCC_CFGR_SW_HSI ((uint32_t)0x00000000) /*!< HSI selected as system clock */
+#define RCC_CFGR_SW_HSE ((uint32_t)0x00000001) /*!< HSE selected as system clock */
+#define RCC_CFGR_SW_PLL ((uint32_t)0x00000002) /*!< PLL selected as system clock */
+#define RCC_CFGR_SW_HSI48 ((uint32_t)0x00000003) /*!< HSI48 selected as system clock */
+
+/*!< SWS configuration */
+#define RCC_CFGR_SWS ((uint32_t)0x0000000C) /*!< SWS[1:0] bits (System Clock Switch Status) */
+#define RCC_CFGR_SWS_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define RCC_CFGR_SWS_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+
+#define RCC_CFGR_SWS_HSI ((uint32_t)0x00000000) /*!< HSI oscillator used as system clock */
+#define RCC_CFGR_SWS_HSE ((uint32_t)0x00000004) /*!< HSE oscillator used as system clock */
+#define RCC_CFGR_SWS_PLL ((uint32_t)0x00000008) /*!< PLL used as system clock */
+#define RCC_CFGR_SWS_HSI48 ((uint32_t)0x0000000C) /*!< HSI48 oscillator used as system clock */
+
+/*!< HPRE configuration */
+#define RCC_CFGR_HPRE ((uint32_t)0x000000F0) /*!< HPRE[3:0] bits (AHB prescaler) */
+#define RCC_CFGR_HPRE_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define RCC_CFGR_HPRE_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define RCC_CFGR_HPRE_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+#define RCC_CFGR_HPRE_3 ((uint32_t)0x00000080) /*!< Bit 3 */
+
+#define RCC_CFGR_HPRE_DIV1 ((uint32_t)0x00000000) /*!< SYSCLK not divided */
+#define RCC_CFGR_HPRE_DIV2 ((uint32_t)0x00000080) /*!< SYSCLK divided by 2 */
+#define RCC_CFGR_HPRE_DIV4 ((uint32_t)0x00000090) /*!< SYSCLK divided by 4 */
+#define RCC_CFGR_HPRE_DIV8 ((uint32_t)0x000000A0) /*!< SYSCLK divided by 8 */
+#define RCC_CFGR_HPRE_DIV16 ((uint32_t)0x000000B0) /*!< SYSCLK divided by 16 */
+#define RCC_CFGR_HPRE_DIV64 ((uint32_t)0x000000C0) /*!< SYSCLK divided by 64 */
+#define RCC_CFGR_HPRE_DIV128 ((uint32_t)0x000000D0) /*!< SYSCLK divided by 128 */
+#define RCC_CFGR_HPRE_DIV256 ((uint32_t)0x000000E0) /*!< SYSCLK divided by 256 */
+#define RCC_CFGR_HPRE_DIV512 ((uint32_t)0x000000F0) /*!< SYSCLK divided by 512 */
+
+/*!< PPRE configuration */
+#define RCC_CFGR_PPRE ((uint32_t)0x00000700) /*!< PRE[2:0] bits (APB prescaler) */
+#define RCC_CFGR_PPRE_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define RCC_CFGR_PPRE_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define RCC_CFGR_PPRE_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+
+#define RCC_CFGR_PPRE_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */
+#define RCC_CFGR_PPRE_DIV2 ((uint32_t)0x00000400) /*!< HCLK divided by 2 */
+#define RCC_CFGR_PPRE_DIV4 ((uint32_t)0x00000500) /*!< HCLK divided by 4 */
+#define RCC_CFGR_PPRE_DIV8 ((uint32_t)0x00000600) /*!< HCLK divided by 8 */
+#define RCC_CFGR_PPRE_DIV16 ((uint32_t)0x00000700) /*!< HCLK divided by 16 */
+
+/*!< ADCPPRE configuration */
+#define RCC_CFGR_ADCPRE ((uint32_t)0x00004000) /*!< ADCPRE bit (ADC prescaler) */
+
+#define RCC_CFGR_ADCPRE_DIV2 ((uint32_t)0x00000000) /*!< PCLK divided by 2 */
+#define RCC_CFGR_ADCPRE_DIV4 ((uint32_t)0x00004000) /*!< PCLK divided by 4 */
+
+#define RCC_CFGR_PLLSRC ((uint32_t)0x00018000) /*!< PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSI_DIV2 ((uint32_t)0x00000000) /*!< HSI clock divided by 2 selected as PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSI_PREDIV ((uint32_t)0x00008000) /*!< HSI/PREDIV clock selected as PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSE_PREDIV ((uint32_t)0x00010000) /*!< HSE/PREDIV clock selected as PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSI48_PREDIV ((uint32_t)0x00018000) /*!< HSI48/PREDIV clock selected as PLL entry clock source */
+
+#define RCC_CFGR_PLLXTPRE ((uint32_t)0x00020000) /*!< HSE divider for PLL entry */
+#define RCC_CFGR_PLLXTPRE_HSE_PREDIV_DIV1 ((uint32_t)0x00000000) /*!< HSE/PREDIV clock not divided for PLL entry */
+#define RCC_CFGR_PLLXTPRE_HSE_PREDIV_DIV2 ((uint32_t)0x00020000) /*!< HSE/PREDIV clock divided by 2 for PLL entry */
+
+/*!< PLLMUL configuration */
+#define RCC_CFGR_PLLMUL ((uint32_t)0x003C0000) /*!< PLLMUL[3:0] bits (PLL multiplication factor) */
+#define RCC_CFGR_PLLMUL_0 ((uint32_t)0x00040000) /*!< Bit 0 */
+#define RCC_CFGR_PLLMUL_1 ((uint32_t)0x00080000) /*!< Bit 1 */
+#define RCC_CFGR_PLLMUL_2 ((uint32_t)0x00100000) /*!< Bit 2 */
+#define RCC_CFGR_PLLMUL_3 ((uint32_t)0x00200000) /*!< Bit 3 */
+
+#define RCC_CFGR_PLLMUL2 ((uint32_t)0x00000000) /*!< PLL input clock*2 */
+#define RCC_CFGR_PLLMUL3 ((uint32_t)0x00040000) /*!< PLL input clock*3 */
+#define RCC_CFGR_PLLMUL4 ((uint32_t)0x00080000) /*!< PLL input clock*4 */
+#define RCC_CFGR_PLLMUL5 ((uint32_t)0x000C0000) /*!< PLL input clock*5 */
+#define RCC_CFGR_PLLMUL6 ((uint32_t)0x00100000) /*!< PLL input clock*6 */
+#define RCC_CFGR_PLLMUL7 ((uint32_t)0x00140000) /*!< PLL input clock*7 */
+#define RCC_CFGR_PLLMUL8 ((uint32_t)0x00180000) /*!< PLL input clock*8 */
+#define RCC_CFGR_PLLMUL9 ((uint32_t)0x001C0000) /*!< PLL input clock*9 */
+#define RCC_CFGR_PLLMUL10 ((uint32_t)0x00200000) /*!< PLL input clock10 */
+#define RCC_CFGR_PLLMUL11 ((uint32_t)0x00240000) /*!< PLL input clock*11 */
+#define RCC_CFGR_PLLMUL12 ((uint32_t)0x00280000) /*!< PLL input clock*12 */
+#define RCC_CFGR_PLLMUL13 ((uint32_t)0x002C0000) /*!< PLL input clock*13 */
+#define RCC_CFGR_PLLMUL14 ((uint32_t)0x00300000) /*!< PLL input clock*14 */
+#define RCC_CFGR_PLLMUL15 ((uint32_t)0x00340000) /*!< PLL input clock*15 */
+#define RCC_CFGR_PLLMUL16 ((uint32_t)0x00380000) /*!< PLL input clock*16 */
+
+/*!< USB configuration */
+#define RCC_CFGR_USBPRE ((uint32_t)0x00400000) /*!< USB prescaler */
+
+/*!< MCO configuration */
+#define RCC_CFGR_MCO ((uint32_t)0x0F000000) /*!< MCO[3:0] bits (Microcontroller Clock Output) */
+#define RCC_CFGR_MCO_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define RCC_CFGR_MCO_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define RCC_CFGR_MCO_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+#define RCC_CFGR_MCO_3 ((uint32_t)0x08000000) /*!< Bit 3 */
+
+#define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
+#define RCC_CFGR_MCO_HSI14 ((uint32_t)0x01000000) /*!< HSI14 clock selected as MCO source */
+#define RCC_CFGR_MCO_LSI ((uint32_t)0x02000000) /*!< LSI clock selected as MCO source */
+#define RCC_CFGR_MCO_LSE ((uint32_t)0x03000000) /*!< LSE clock selected as MCO source */
+#define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x04000000) /*!< System clock selected as MCO source */
+#define RCC_CFGR_MCO_HSI ((uint32_t)0x05000000) /*!< HSI clock selected as MCO source */
+#define RCC_CFGR_MCO_HSE ((uint32_t)0x06000000) /*!< HSE clock selected as MCO source */
+#define RCC_CFGR_MCO_PLL ((uint32_t)0x07000000) /*!< PLL clock divided by 2 selected as MCO source */
+#define RCC_CFGR_MCO_HSI48 ((uint32_t)0x08000000) /*!< HSI48 clock selected as MCO source */
+
+#define RCC_CFGR_MCOPRE ((uint32_t)0x70000000) /*!< MCO prescaler */
+#define RCC_CFGR_MCOPRE_DIV1 ((uint32_t)0x00000000) /*!< MCO is divided by 1 */
+#define RCC_CFGR_MCOPRE_DIV2 ((uint32_t)0x10000000) /*!< MCO is divided by 2 */
+#define RCC_CFGR_MCOPRE_DIV4 ((uint32_t)0x20000000) /*!< MCO is divided by 4 */
+#define RCC_CFGR_MCOPRE_DIV8 ((uint32_t)0x30000000) /*!< MCO is divided by 8 */
+#define RCC_CFGR_MCOPRE_DIV16 ((uint32_t)0x40000000) /*!< MCO is divided by 16 */
+#define RCC_CFGR_MCOPRE_DIV32 ((uint32_t)0x50000000) /*!< MCO is divided by 32 */
+#define RCC_CFGR_MCOPRE_DIV64 ((uint32_t)0x60000000) /*!< MCO is divided by 64 */
+#define RCC_CFGR_MCOPRE_DIV128 ((uint32_t)0x70000000) /*!< MCO is divided by 128 */
+
+#define RCC_CFGR_PLLNODIV ((uint32_t)0x80000000) /*!< PLL is not divided to MCO */
+
+/*!<****************** Bit definition for RCC_CIR register *****************/
+#define RCC_CIR_LSIRDYF ((uint32_t)0x00000001) /*!< LSI Ready Interrupt flag */
+#define RCC_CIR_LSERDYF ((uint32_t)0x00000002) /*!< LSE Ready Interrupt flag */
+#define RCC_CIR_HSIRDYF ((uint32_t)0x00000004) /*!< HSI Ready Interrupt flag */
+#define RCC_CIR_HSERDYF ((uint32_t)0x00000008) /*!< HSE Ready Interrupt flag */
+#define RCC_CIR_PLLRDYF ((uint32_t)0x00000010) /*!< PLL Ready Interrupt flag */
+#define RCC_CIR_HSI14RDYF ((uint32_t)0x00000020) /*!< HSI14 Ready Interrupt flag */
+#define RCC_CIR_HSI48RDYF ((uint32_t)0x00000040) /*!< HSI48 Ready Interrupt flag */
+#define RCC_CIR_CSSF ((uint32_t)0x00000080) /*!< Clock Security System Interrupt flag */
+#define RCC_CIR_LSIRDYIE ((uint32_t)0x00000100) /*!< LSI Ready Interrupt Enable */
+#define RCC_CIR_LSERDYIE ((uint32_t)0x00000200) /*!< LSE Ready Interrupt Enable */
+#define RCC_CIR_HSIRDYIE ((uint32_t)0x00000400) /*!< HSI Ready Interrupt Enable */
+#define RCC_CIR_HSERDYIE ((uint32_t)0x00000800) /*!< HSE Ready Interrupt Enable */
+#define RCC_CIR_PLLRDYIE ((uint32_t)0x00001000) /*!< PLL Ready Interrupt Enable */
+#define RCC_CIR_HSI14RDYIE ((uint32_t)0x00002000) /*!< HSI14 Ready Interrupt Enable */
+#define RCC_CIR_HSI48RDYIE ((uint32_t)0x00004000) /*!< HSI48 Ready Interrupt Enable */
+#define RCC_CIR_LSIRDYC ((uint32_t)0x00010000) /*!< LSI Ready Interrupt Clear */
+#define RCC_CIR_LSERDYC ((uint32_t)0x00020000) /*!< LSE Ready Interrupt Clear */
+#define RCC_CIR_HSIRDYC ((uint32_t)0x00040000) /*!< HSI Ready Interrupt Clear */
+#define RCC_CIR_HSERDYC ((uint32_t)0x00080000) /*!< HSE Ready Interrupt Clear */
+#define RCC_CIR_PLLRDYC ((uint32_t)0x00100000) /*!< PLL Ready Interrupt Clear */
+#define RCC_CIR_HSI14RDYC ((uint32_t)0x00200000) /*!< HSI14 Ready Interrupt Clear */
+#define RCC_CIR_HSI48RDYC ((uint32_t)0x00400000) /*!< HSI48 Ready Interrupt Clear */
+#define RCC_CIR_CSSC ((uint32_t)0x00800000) /*!< Clock Security System Interrupt Clear */
+
+/***************** Bit definition for RCC_APB2RSTR register ****************/
+#define RCC_APB2RSTR_SYSCFGRST ((uint32_t)0x00000001) /*!< SYSCFG clock reset */
+#define RCC_APB2RSTR_ADCRST ((uint32_t)0x00000200) /*!< ADC clock reset */
+#define RCC_APB2RSTR_TIM1RST ((uint32_t)0x00000800) /*!< TIM1 clock reset */
+#define RCC_APB2RSTR_SPI1RST ((uint32_t)0x00001000) /*!< SPI1 clock reset */
+#define RCC_APB2RSTR_USART1RST ((uint32_t)0x00004000) /*!< USART1 clock reset */
+#define RCC_APB2RSTR_TIM16RST ((uint32_t)0x00020000) /*!< TIM16 clock reset */
+#define RCC_APB2RSTR_TIM17RST ((uint32_t)0x00040000) /*!< TIM17 clock reset */
+#define RCC_APB2RSTR_DBGMCURST ((uint32_t)0x00400000) /*!< DBGMCU clock reset */
+
+/*!< Old ADC1 clock reset bit definition maintained for legacy purpose */
+#define RCC_APB2RSTR_ADC1RST RCC_APB2RSTR_ADCRST
+
+/***************** Bit definition for RCC_APB1RSTR register ****************/
+#define RCC_APB1RSTR_TIM2RST ((uint32_t)0x00000001) /*!< Timer 2 clock reset */
+#define RCC_APB1RSTR_TIM3RST ((uint32_t)0x00000002) /*!< Timer 3 clock reset */
+#define RCC_APB1RSTR_TIM14RST ((uint32_t)0x00000100) /*!< Timer 14 clock reset */
+#define RCC_APB1RSTR_WWDGRST ((uint32_t)0x00000800) /*!< Window Watchdog clock reset */
+#define RCC_APB1RSTR_SPI2RST ((uint32_t)0x00004000) /*!< SPI2 clock reset */
+#define RCC_APB1RSTR_USART2RST ((uint32_t)0x00020000) /*!< USART 2 clock reset */
+#define RCC_APB1RSTR_USART3RST ((uint32_t)0x00040000) /*!< USART 3 clock reset */
+#define RCC_APB1RSTR_USART4RST ((uint32_t)0x00080000) /*!< USART 4 clock reset */
+#define RCC_APB1RSTR_I2C1RST ((uint32_t)0x00200000) /*!< I2C 1 clock reset */
+#define RCC_APB1RSTR_I2C2RST ((uint32_t)0x00400000) /*!< I2C 2 clock reset */
+#define RCC_APB1RSTR_USBRST ((uint32_t)0x00800000) /*!< USB clock reset */
+#define RCC_APB1RSTR_CANRST ((uint32_t)0x02000000) /*!< CAN clock reset */
+#define RCC_APB1RSTR_CRSRST ((uint32_t)0x08000000) /*!< CRS clock reset */
+#define RCC_APB1RSTR_PWRRST ((uint32_t)0x10000000) /*!< PWR clock reset */
+#define RCC_APB1RSTR_DACRST ((uint32_t)0x20000000) /*!< DAC clock reset */
+#define RCC_APB1RSTR_CECRST ((uint32_t)0x40000000) /*!< CEC clock reset */
+
+/****************** Bit definition for RCC_AHBENR register *****************/
+#define RCC_AHBENR_DMAEN ((uint32_t)0x00000001) /*!< DMA1 clock enable */
+#define RCC_AHBENR_SRAMEN ((uint32_t)0x00000004) /*!< SRAM interface clock enable */
+#define RCC_AHBENR_FLITFEN ((uint32_t)0x00000010) /*!< FLITF clock enable */
+#define RCC_AHBENR_CRCEN ((uint32_t)0x00000040) /*!< CRC clock enable */
+#define RCC_AHBENR_GPIOAEN ((uint32_t)0x00020000) /*!< GPIOA clock enable */
+#define RCC_AHBENR_GPIOBEN ((uint32_t)0x00040000) /*!< GPIOB clock enable */
+#define RCC_AHBENR_GPIOCEN ((uint32_t)0x00080000) /*!< GPIOC clock enable */
+#define RCC_AHBENR_GPIOFEN ((uint32_t)0x00400000) /*!< GPIOF clock enable */
+#define RCC_AHBENR_TSCEN ((uint32_t)0x01000000) /*!< TS controller clock enable */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_AHBENR_DMA1EN RCC_AHBENR_DMAEN /*!< DMA1 clock enable */
+#define RCC_AHBENR_TSEN RCC_AHBENR_TSCEN /*!< TS clock enable */
+
+/***************** Bit definition for RCC_APB2ENR register *****************/
+#define RCC_APB2ENR_SYSCFGCOMPEN ((uint32_t)0x00000001) /*!< SYSCFG and comparator clock enable */
+#define RCC_APB2ENR_ADCEN ((uint32_t)0x00000200) /*!< ADC1 clock enable */
+#define RCC_APB2ENR_TIM1EN ((uint32_t)0x00000800) /*!< TIM1 clock enable */
+#define RCC_APB2ENR_SPI1EN ((uint32_t)0x00001000) /*!< SPI1 clock enable */
+#define RCC_APB2ENR_USART1EN ((uint32_t)0x00004000) /*!< USART1 clock enable */
+#define RCC_APB2ENR_TIM16EN ((uint32_t)0x00020000) /*!< TIM16 clock enable */
+#define RCC_APB2ENR_TIM17EN ((uint32_t)0x00040000) /*!< TIM17 clock enable */
+#define RCC_APB2ENR_DBGMCUEN ((uint32_t)0x00400000) /*!< DBGMCU clock enable */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_APB2ENR_SYSCFGEN RCC_APB2ENR_SYSCFGCOMPEN /*!< SYSCFG clock enable */
+#define RCC_APB2ENR_ADC1EN RCC_APB2ENR_ADCEN /*!< ADC1 clock enable */
+
+/***************** Bit definition for RCC_APB1ENR register *****************/
+#define RCC_APB1ENR_TIM2EN ((uint32_t)0x00000001) /*!< Timer 2 clock enable */
+#define RCC_APB1ENR_TIM3EN ((uint32_t)0x00000002) /*!< Timer 3 clock enable */
+#define RCC_APB1ENR_TIM14EN ((uint32_t)0x00000100) /*!< Timer 14 clock enable */
+#define RCC_APB1ENR_WWDGEN ((uint32_t)0x00000800) /*!< Window Watchdog clock enable */
+#define RCC_APB1ENR_SPI2EN ((uint32_t)0x00004000) /*!< SPI2 clock enable */
+#define RCC_APB1ENR_USART2EN ((uint32_t)0x00020000) /*!< USART2 clock enable */
+#define RCC_APB1ENR_USART3EN ((uint32_t)0x00040000) /*!< USART3 clock enable */
+#define RCC_APB1ENR_USART4EN ((uint32_t)0x00080000) /*!< USART4 clock enable */
+#define RCC_APB1ENR_I2C1EN ((uint32_t)0x00200000) /*!< I2C1 clock enable */
+#define RCC_APB1ENR_I2C2EN ((uint32_t)0x00400000) /*!< I2C2 clock enable */
+#define RCC_APB1ENR_USBEN ((uint32_t)0x00800000) /*!< USB clock enable */
+#define RCC_APB1ENR_CANEN ((uint32_t)0x02000000) /*!< CAN clock enable */
+#define RCC_APB1ENR_CRSEN ((uint32_t)0x08000000) /*!< CRS clock enable */
+#define RCC_APB1ENR_PWREN ((uint32_t)0x10000000) /*!< PWR clock enable */
+#define RCC_APB1ENR_DACEN ((uint32_t)0x20000000) /*!< DAC clock enable */
+#define RCC_APB1ENR_CECEN ((uint32_t)0x40000000) /*!< CEC clock enable */
+
+/******************* Bit definition for RCC_BDCR register ******************/
+#define RCC_BDCR_LSEON ((uint32_t)0x00000001) /*!< External Low Speed oscillator enable */
+#define RCC_BDCR_LSERDY ((uint32_t)0x00000002) /*!< External Low Speed oscillator Ready */
+#define RCC_BDCR_LSEBYP ((uint32_t)0x00000004) /*!< External Low Speed oscillator Bypass */
+
+#define RCC_BDCR_LSEDRV ((uint32_t)0x00000018) /*!< LSEDRV[1:0] bits (LSE Osc. drive capability) */
+#define RCC_BDCR_LSEDRV_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define RCC_BDCR_LSEDRV_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+
+#define RCC_BDCR_RTCSEL ((uint32_t)0x00000300) /*!< RTCSEL[1:0] bits (RTC clock source selection) */
+#define RCC_BDCR_RTCSEL_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define RCC_BDCR_RTCSEL_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+
+/*!< RTC configuration */
+#define RCC_BDCR_RTCSEL_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
+#define RCC_BDCR_RTCSEL_LSE ((uint32_t)0x00000100) /*!< LSE oscillator clock used as RTC clock */
+#define RCC_BDCR_RTCSEL_LSI ((uint32_t)0x00000200) /*!< LSI oscillator clock used as RTC clock */
+#define RCC_BDCR_RTCSEL_HSE ((uint32_t)0x00000300) /*!< HSE oscillator clock divided by 128 used as RTC clock */
+
+#define RCC_BDCR_RTCEN ((uint32_t)0x00008000) /*!< RTC clock enable */
+#define RCC_BDCR_BDRST ((uint32_t)0x00010000) /*!< Backup domain software reset */
+
+/******************* Bit definition for RCC_CSR register *******************/
+#define RCC_CSR_LSION ((uint32_t)0x00000001) /*!< Internal Low Speed oscillator enable */
+#define RCC_CSR_LSIRDY ((uint32_t)0x00000002) /*!< Internal Low Speed oscillator Ready */
+#define RCC_CSR_V18PWRRSTF ((uint32_t)0x00800000) /*!< V1.8 power domain reset flag */
+#define RCC_CSR_RMVF ((uint32_t)0x01000000) /*!< Remove reset flag */
+#define RCC_CSR_OBLRSTF ((uint32_t)0x02000000) /*!< OBL reset flag */
+#define RCC_CSR_PINRSTF ((uint32_t)0x04000000) /*!< PIN reset flag */
+#define RCC_CSR_PORRSTF ((uint32_t)0x08000000) /*!< POR/PDR reset flag */
+#define RCC_CSR_SFTRSTF ((uint32_t)0x10000000) /*!< Software Reset flag */
+#define RCC_CSR_IWDGRSTF ((uint32_t)0x20000000) /*!< Independent Watchdog reset flag */
+#define RCC_CSR_WWDGRSTF ((uint32_t)0x40000000) /*!< Window watchdog reset flag */
+#define RCC_CSR_LPWRRSTF ((uint32_t)0x80000000) /*!< Low-Power reset flag */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_CSR_OBL RCC_CSR_OBLRSTF /*!< OBL reset flag */
+
+/******************* Bit definition for RCC_AHBRSTR register ***************/
+#define RCC_AHBRSTR_GPIOARST ((uint32_t)0x00020000) /*!< GPIOA clock reset */
+#define RCC_AHBRSTR_GPIOBRST ((uint32_t)0x00040000) /*!< GPIOB clock reset */
+#define RCC_AHBRSTR_GPIOCRST ((uint32_t)0x00080000) /*!< GPIOC clock reset */
+#define RCC_AHBRSTR_GPIOFRST ((uint32_t)0x00400000) /*!< GPIOF clock reset */
+#define RCC_AHBRSTR_TSCRST ((uint32_t)0x01000000) /*!< TS clock reset */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_AHBRSTR_TSRST RCC_AHBRSTR_TSCRST /*!< TS clock reset */
+
+/******************* Bit definition for RCC_CFGR2 register *****************/
+/*!< PREDIV configuration */
+#define RCC_CFGR2_PREDIV ((uint32_t)0x0000000F) /*!< PREDIV[3:0] bits */
+#define RCC_CFGR2_PREDIV_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR2_PREDIV_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define RCC_CFGR2_PREDIV_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define RCC_CFGR2_PREDIV_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+
+#define RCC_CFGR2_PREDIV_DIV1 ((uint32_t)0x00000000) /*!< PREDIV input clock not divided */
+#define RCC_CFGR2_PREDIV_DIV2 ((uint32_t)0x00000001) /*!< PREDIV input clock divided by 2 */
+#define RCC_CFGR2_PREDIV_DIV3 ((uint32_t)0x00000002) /*!< PREDIV input clock divided by 3 */
+#define RCC_CFGR2_PREDIV_DIV4 ((uint32_t)0x00000003) /*!< PREDIV input clock divided by 4 */
+#define RCC_CFGR2_PREDIV_DIV5 ((uint32_t)0x00000004) /*!< PREDIV input clock divided by 5 */
+#define RCC_CFGR2_PREDIV_DIV6 ((uint32_t)0x00000005) /*!< PREDIV input clock divided by 6 */
+#define RCC_CFGR2_PREDIV_DIV7 ((uint32_t)0x00000006) /*!< PREDIV input clock divided by 7 */
+#define RCC_CFGR2_PREDIV_DIV8 ((uint32_t)0x00000007) /*!< PREDIV input clock divided by 8 */
+#define RCC_CFGR2_PREDIV_DIV9 ((uint32_t)0x00000008) /*!< PREDIV input clock divided by 9 */
+#define RCC_CFGR2_PREDIV_DIV10 ((uint32_t)0x00000009) /*!< PREDIV input clock divided by 10 */
+#define RCC_CFGR2_PREDIV_DIV11 ((uint32_t)0x0000000A) /*!< PREDIV input clock divided by 11 */
+#define RCC_CFGR2_PREDIV_DIV12 ((uint32_t)0x0000000B) /*!< PREDIV input clock divided by 12 */
+#define RCC_CFGR2_PREDIV_DIV13 ((uint32_t)0x0000000C) /*!< PREDIV input clock divided by 13 */
+#define RCC_CFGR2_PREDIV_DIV14 ((uint32_t)0x0000000D) /*!< PREDIV input clock divided by 14 */
+#define RCC_CFGR2_PREDIV_DIV15 ((uint32_t)0x0000000E) /*!< PREDIV input clock divided by 15 */
+#define RCC_CFGR2_PREDIV_DIV16 ((uint32_t)0x0000000F) /*!< PREDIV input clock divided by 16 */
+
+/******************* Bit definition for RCC_CFGR3 register *****************/
+/*!< USART1 Clock source selection */
+#define RCC_CFGR3_USART1SW ((uint32_t)0x00000003) /*!< USART1SW[1:0] bits */
+#define RCC_CFGR3_USART1SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR3_USART1SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+#define RCC_CFGR3_USART1SW_PCLK ((uint32_t)0x00000000) /*!< PCLK clock used as USART1 clock source */
+#define RCC_CFGR3_USART1SW_SYSCLK ((uint32_t)0x00000001) /*!< System clock selected as USART1 clock source */
+#define RCC_CFGR3_USART1SW_LSE ((uint32_t)0x00000002) /*!< LSE oscillator clock used as USART1 clock source */
+#define RCC_CFGR3_USART1SW_HSI ((uint32_t)0x00000003) /*!< HSI oscillator clock used as USART1 clock source */
+
+/*!< I2C1 Clock source selection */
+#define RCC_CFGR3_I2C1SW ((uint32_t)0x00000010) /*!< I2C1SW bits */
+
+#define RCC_CFGR3_I2C1SW_HSI ((uint32_t)0x00000000) /*!< HSI oscillator clock used as I2C1 clock source */
+#define RCC_CFGR3_I2C1SW_SYSCLK ((uint32_t)0x00000010) /*!< System clock selected as I2C1 clock source */
+
+/*!< CEC Clock source selection */
+#define RCC_CFGR3_CECSW ((uint32_t)0x00000040) /*!< CECSW bits */
+
+#define RCC_CFGR3_CECSW_HSI_DIV244 ((uint32_t)0x00000000) /*!< HSI clock divided by 244 selected as HDMI CEC entry clock source */
+#define RCC_CFGR3_CECSW_LSE ((uint32_t)0x00000040) /*!< LSE clock selected as HDMI CEC entry clock source */
+
+/*!< USB Clock source selection */
+#define RCC_CFGR3_USBSW ((uint32_t)0x00000080) /*!< USBSW bits */
+
+#define RCC_CFGR3_USBSW_HSI48 ((uint32_t)0x00000000) /*!< HSI48 oscillator clock used as USB clock source */
+#define RCC_CFGR3_USBSW_PLLCLK ((uint32_t)0x00000080) /*!< PLLCLK selected as USB clock source */
+
+/*!< USART2 Clock source selection */
+#define RCC_CFGR3_USART2SW ((uint32_t)0x00030000) /*!< USART2SW[1:0] bits */
+#define RCC_CFGR3_USART2SW_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define RCC_CFGR3_USART2SW_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+
+#define RCC_CFGR3_USART2SW_PCLK ((uint32_t)0x00000000) /*!< PCLK clock used as USART2 clock source */
+#define RCC_CFGR3_USART2SW_SYSCLK ((uint32_t)0x00010000) /*!< System clock selected as USART2 clock source */
+#define RCC_CFGR3_USART2SW_LSE ((uint32_t)0x00020000) /*!< LSE oscillator clock used as USART2 clock source */
+#define RCC_CFGR3_USART2SW_HSI ((uint32_t)0x00030000) /*!< HSI oscillator clock used as USART2 clock source */
+
+/******************* Bit definition for RCC_CR2 register *******************/
+#define RCC_CR2_HSI14ON ((uint32_t)0x00000001) /*!< Internal High Speed 14MHz clock enable */
+#define RCC_CR2_HSI14RDY ((uint32_t)0x00000002) /*!< Internal High Speed 14MHz clock ready flag */
+#define RCC_CR2_HSI14DIS ((uint32_t)0x00000004) /*!< Internal High Speed 14MHz clock disable */
+#define RCC_CR2_HSI14TRIM ((uint32_t)0x000000F8) /*!< Internal High Speed 14MHz clock trimming */
+#define RCC_CR2_HSI14CAL ((uint32_t)0x0000FF00) /*!< Internal High Speed 14MHz clock Calibration */
+#define RCC_CR2_HSI48ON ((uint32_t)0x00010000) /*!< Internal High Speed 48MHz clock enable */
+#define RCC_CR2_HSI48RDY ((uint32_t)0x00020000) /*!< Internal High Speed 48MHz clock ready flag */
+#define RCC_CR2_HSI48CAL ((uint32_t)0xFF000000) /*!< Internal High Speed 48MHz clock Calibration */
+
+/*****************************************************************************/
+/* */
+/* Real-Time Clock (RTC) */
+/* */
+/*****************************************************************************/
+/******************** Bits definition for RTC_TR register ******************/
+#define RTC_TR_PM ((uint32_t)0x00400000)
+#define RTC_TR_HT ((uint32_t)0x00300000)
+#define RTC_TR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TR_HU ((uint32_t)0x000F0000)
+#define RTC_TR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TR_MNT ((uint32_t)0x00007000)
+#define RTC_TR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TR_MNU ((uint32_t)0x00000F00)
+#define RTC_TR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TR_ST ((uint32_t)0x00000070)
+#define RTC_TR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TR_SU ((uint32_t)0x0000000F)
+#define RTC_TR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_DR register ******************/
+#define RTC_DR_YT ((uint32_t)0x00F00000)
+#define RTC_DR_YT_0 ((uint32_t)0x00100000)
+#define RTC_DR_YT_1 ((uint32_t)0x00200000)
+#define RTC_DR_YT_2 ((uint32_t)0x00400000)
+#define RTC_DR_YT_3 ((uint32_t)0x00800000)
+#define RTC_DR_YU ((uint32_t)0x000F0000)
+#define RTC_DR_YU_0 ((uint32_t)0x00010000)
+#define RTC_DR_YU_1 ((uint32_t)0x00020000)
+#define RTC_DR_YU_2 ((uint32_t)0x00040000)
+#define RTC_DR_YU_3 ((uint32_t)0x00080000)
+#define RTC_DR_WDU ((uint32_t)0x0000E000)
+#define RTC_DR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_DR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_DR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_DR_MT ((uint32_t)0x00001000)
+#define RTC_DR_MU ((uint32_t)0x00000F00)
+#define RTC_DR_MU_0 ((uint32_t)0x00000100)
+#define RTC_DR_MU_1 ((uint32_t)0x00000200)
+#define RTC_DR_MU_2 ((uint32_t)0x00000400)
+#define RTC_DR_MU_3 ((uint32_t)0x00000800)
+#define RTC_DR_DT ((uint32_t)0x00000030)
+#define RTC_DR_DT_0 ((uint32_t)0x00000010)
+#define RTC_DR_DT_1 ((uint32_t)0x00000020)
+#define RTC_DR_DU ((uint32_t)0x0000000F)
+#define RTC_DR_DU_0 ((uint32_t)0x00000001)
+#define RTC_DR_DU_1 ((uint32_t)0x00000002)
+#define RTC_DR_DU_2 ((uint32_t)0x00000004)
+#define RTC_DR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_CR register ******************/
+#define RTC_CR_COE ((uint32_t)0x00800000)
+#define RTC_CR_OSEL ((uint32_t)0x00600000)
+#define RTC_CR_OSEL_0 ((uint32_t)0x00200000)
+#define RTC_CR_OSEL_1 ((uint32_t)0x00400000)
+#define RTC_CR_POL ((uint32_t)0x00100000)
+#define RTC_CR_COSEL ((uint32_t)0x00080000)
+#define RTC_CR_BCK ((uint32_t)0x00040000)
+#define RTC_CR_SUB1H ((uint32_t)0x00020000)
+#define RTC_CR_ADD1H ((uint32_t)0x00010000)
+#define RTC_CR_TSIE ((uint32_t)0x00008000)
+#define RTC_CR_ALRAIE ((uint32_t)0x00001000)
+#define RTC_CR_TSE ((uint32_t)0x00000800)
+#define RTC_CR_ALRAE ((uint32_t)0x00000100)
+#define RTC_CR_FMT ((uint32_t)0x00000040)
+#define RTC_CR_BYPSHAD ((uint32_t)0x00000020)
+#define RTC_CR_REFCKON ((uint32_t)0x00000010)
+#define RTC_CR_TSEDGE ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_ISR register *****************/
+#define RTC_ISR_RECALPF ((uint32_t)0x00010000)
+#define RTC_ISR_TAMP2F ((uint32_t)0x00004000)
+#define RTC_ISR_TAMP1F ((uint32_t)0x00002000)
+#define RTC_ISR_TSOVF ((uint32_t)0x00001000)
+#define RTC_ISR_TSF ((uint32_t)0x00000800)
+#define RTC_ISR_ALRAF ((uint32_t)0x00000100)
+#define RTC_ISR_INIT ((uint32_t)0x00000080)
+#define RTC_ISR_INITF ((uint32_t)0x00000040)
+#define RTC_ISR_RSF ((uint32_t)0x00000020)
+#define RTC_ISR_INITS ((uint32_t)0x00000010)
+#define RTC_ISR_SHPF ((uint32_t)0x00000008)
+#define RTC_ISR_ALRAWF ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_PRER register ****************/
+#define RTC_PRER_PREDIV_A ((uint32_t)0x007F0000)
+#define RTC_PRER_PREDIV_S ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_ALRMAR register **************/
+#define RTC_ALRMAR_MSK4 ((uint32_t)0x80000000)
+#define RTC_ALRMAR_WDSEL ((uint32_t)0x40000000)
+#define RTC_ALRMAR_DT ((uint32_t)0x30000000)
+#define RTC_ALRMAR_DT_0 ((uint32_t)0x10000000)
+#define RTC_ALRMAR_DT_1 ((uint32_t)0x20000000)
+#define RTC_ALRMAR_DU ((uint32_t)0x0F000000)
+#define RTC_ALRMAR_DU_0 ((uint32_t)0x01000000)
+#define RTC_ALRMAR_DU_1 ((uint32_t)0x02000000)
+#define RTC_ALRMAR_DU_2 ((uint32_t)0x04000000)
+#define RTC_ALRMAR_DU_3 ((uint32_t)0x08000000)
+#define RTC_ALRMAR_MSK3 ((uint32_t)0x00800000)
+#define RTC_ALRMAR_PM ((uint32_t)0x00400000)
+#define RTC_ALRMAR_HT ((uint32_t)0x00300000)
+#define RTC_ALRMAR_HT_0 ((uint32_t)0x00100000)
+#define RTC_ALRMAR_HT_1 ((uint32_t)0x00200000)
+#define RTC_ALRMAR_HU ((uint32_t)0x000F0000)
+#define RTC_ALRMAR_HU_0 ((uint32_t)0x00010000)
+#define RTC_ALRMAR_HU_1 ((uint32_t)0x00020000)
+#define RTC_ALRMAR_HU_2 ((uint32_t)0x00040000)
+#define RTC_ALRMAR_HU_3 ((uint32_t)0x00080000)
+#define RTC_ALRMAR_MSK2 ((uint32_t)0x00008000)
+#define RTC_ALRMAR_MNT ((uint32_t)0x00007000)
+#define RTC_ALRMAR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_ALRMAR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_ALRMAR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_ALRMAR_MNU ((uint32_t)0x00000F00)
+#define RTC_ALRMAR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_ALRMAR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_ALRMAR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_ALRMAR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_ALRMAR_MSK1 ((uint32_t)0x00000080)
+#define RTC_ALRMAR_ST ((uint32_t)0x00000070)
+#define RTC_ALRMAR_ST_0 ((uint32_t)0x00000010)
+#define RTC_ALRMAR_ST_1 ((uint32_t)0x00000020)
+#define RTC_ALRMAR_ST_2 ((uint32_t)0x00000040)
+#define RTC_ALRMAR_SU ((uint32_t)0x0000000F)
+#define RTC_ALRMAR_SU_0 ((uint32_t)0x00000001)
+#define RTC_ALRMAR_SU_1 ((uint32_t)0x00000002)
+#define RTC_ALRMAR_SU_2 ((uint32_t)0x00000004)
+#define RTC_ALRMAR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_WPR register *****************/
+#define RTC_WPR_KEY ((uint32_t)0x000000FF)
+
+/******************** Bits definition for RTC_SSR register *****************/
+#define RTC_SSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_SHIFTR register **************/
+#define RTC_SHIFTR_SUBFS ((uint32_t)0x00007FFF)
+#define RTC_SHIFTR_ADD1S ((uint32_t)0x80000000)
+
+/******************** Bits definition for RTC_TSTR register ****************/
+#define RTC_TSTR_PM ((uint32_t)0x00400000)
+#define RTC_TSTR_HT ((uint32_t)0x00300000)
+#define RTC_TSTR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TSTR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TSTR_HU ((uint32_t)0x000F0000)
+#define RTC_TSTR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TSTR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TSTR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TSTR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TSTR_MNT ((uint32_t)0x00007000)
+#define RTC_TSTR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TSTR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TSTR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TSTR_MNU ((uint32_t)0x00000F00)
+#define RTC_TSTR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TSTR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TSTR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TSTR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TSTR_ST ((uint32_t)0x00000070)
+#define RTC_TSTR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TSTR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TSTR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TSTR_SU ((uint32_t)0x0000000F)
+#define RTC_TSTR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TSTR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TSTR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TSTR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSDR register ****************/
+#define RTC_TSDR_WDU ((uint32_t)0x0000E000)
+#define RTC_TSDR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_TSDR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_TSDR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_TSDR_MT ((uint32_t)0x00001000)
+#define RTC_TSDR_MU ((uint32_t)0x00000F00)
+#define RTC_TSDR_MU_0 ((uint32_t)0x00000100)
+#define RTC_TSDR_MU_1 ((uint32_t)0x00000200)
+#define RTC_TSDR_MU_2 ((uint32_t)0x00000400)
+#define RTC_TSDR_MU_3 ((uint32_t)0x00000800)
+#define RTC_TSDR_DT ((uint32_t)0x00000030)
+#define RTC_TSDR_DT_0 ((uint32_t)0x00000010)
+#define RTC_TSDR_DT_1 ((uint32_t)0x00000020)
+#define RTC_TSDR_DU ((uint32_t)0x0000000F)
+#define RTC_TSDR_DU_0 ((uint32_t)0x00000001)
+#define RTC_TSDR_DU_1 ((uint32_t)0x00000002)
+#define RTC_TSDR_DU_2 ((uint32_t)0x00000004)
+#define RTC_TSDR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSSSR register ***************/
+#define RTC_TSSSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_CALR register ****************/
+#define RTC_CALR_CALP ((uint32_t)0x00008000)
+#define RTC_CALR_CALW8 ((uint32_t)0x00004000)
+#define RTC_CALR_CALW16 ((uint32_t)0x00002000)
+#define RTC_CALR_CALM ((uint32_t)0x000001FF)
+#define RTC_CALR_CALM_0 ((uint32_t)0x00000001)
+#define RTC_CALR_CALM_1 ((uint32_t)0x00000002)
+#define RTC_CALR_CALM_2 ((uint32_t)0x00000004)
+#define RTC_CALR_CALM_3 ((uint32_t)0x00000008)
+#define RTC_CALR_CALM_4 ((uint32_t)0x00000010)
+#define RTC_CALR_CALM_5 ((uint32_t)0x00000020)
+#define RTC_CALR_CALM_6 ((uint32_t)0x00000040)
+#define RTC_CALR_CALM_7 ((uint32_t)0x00000080)
+#define RTC_CALR_CALM_8 ((uint32_t)0x00000100)
+
+/******************** Bits definition for RTC_TAFCR register ***************/
+#define RTC_TAFCR_ALARMOUTTYPE ((uint32_t)0x00040000)
+#define RTC_TAFCR_TAMPPUDIS ((uint32_t)0x00008000)
+#define RTC_TAFCR_TAMPPRCH ((uint32_t)0x00006000)
+#define RTC_TAFCR_TAMPPRCH_0 ((uint32_t)0x00002000)
+#define RTC_TAFCR_TAMPPRCH_1 ((uint32_t)0x00004000)
+#define RTC_TAFCR_TAMPFLT ((uint32_t)0x00001800)
+#define RTC_TAFCR_TAMPFLT_0 ((uint32_t)0x00000800)
+#define RTC_TAFCR_TAMPFLT_1 ((uint32_t)0x00001000)
+#define RTC_TAFCR_TAMPFREQ ((uint32_t)0x00000700)
+#define RTC_TAFCR_TAMPFREQ_0 ((uint32_t)0x00000100)
+#define RTC_TAFCR_TAMPFREQ_1 ((uint32_t)0x00000200)
+#define RTC_TAFCR_TAMPFREQ_2 ((uint32_t)0x00000400)
+#define RTC_TAFCR_TAMPTS ((uint32_t)0x00000080)
+#define RTC_TAFCR_TAMP2TRG ((uint32_t)0x00000010)
+#define RTC_TAFCR_TAMP2E ((uint32_t)0x00000008)
+#define RTC_TAFCR_TAMPIE ((uint32_t)0x00000004)
+#define RTC_TAFCR_TAMP1TRG ((uint32_t)0x00000002)
+#define RTC_TAFCR_TAMP1E ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_ALRMASSR register ************/
+#define RTC_ALRMASSR_MASKSS ((uint32_t)0x0F000000)
+#define RTC_ALRMASSR_MASKSS_0 ((uint32_t)0x01000000)
+#define RTC_ALRMASSR_MASKSS_1 ((uint32_t)0x02000000)
+#define RTC_ALRMASSR_MASKSS_2 ((uint32_t)0x04000000)
+#define RTC_ALRMASSR_MASKSS_3 ((uint32_t)0x08000000)
+#define RTC_ALRMASSR_SS ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_BKP0R register ***************/
+#define RTC_BKP0R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP1R register ***************/
+#define RTC_BKP1R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP2R register ***************/
+#define RTC_BKP2R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP3R register ***************/
+#define RTC_BKP3R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP4R register ***************/
+#define RTC_BKP4R ((uint32_t)0xFFFFFFFF)
+
+/******************** Number of backup registers ******************************/
+#define RTC_BKP_NUMBER ((uint32_t)0x00000005)
+
+/*****************************************************************************/
+/* */
+/* Serial Peripheral Interface (SPI) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for SPI_CR1 register *******************/
+#define SPI_CR1_CPHA ((uint32_t)0x00000001) /*!< Clock Phase */
+#define SPI_CR1_CPOL ((uint32_t)0x00000002) /*!< Clock Polarity */
+#define SPI_CR1_MSTR ((uint32_t)0x00000004) /*!< Master Selection */
+#define SPI_CR1_BR ((uint32_t)0x00000038) /*!< BR[2:0] bits (Baud Rate Control) */
+#define SPI_CR1_BR_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define SPI_CR1_BR_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define SPI_CR1_BR_2 ((uint32_t)0x00000020) /*!< Bit 2 */
+#define SPI_CR1_SPE ((uint32_t)0x00000040) /*!< SPI Enable */
+#define SPI_CR1_LSBFIRST ((uint32_t)0x00000080) /*!< Frame Format */
+#define SPI_CR1_SSI ((uint32_t)0x00000100) /*!< Internal slave select */
+#define SPI_CR1_SSM ((uint32_t)0x00000200) /*!< Software slave management */
+#define SPI_CR1_RXONLY ((uint32_t)0x00000400) /*!< Receive only */
+#define SPI_CR1_CRCL ((uint32_t)0x00000800) /*!< CRC Length */
+#define SPI_CR1_CRCNEXT ((uint32_t)0x00001000) /*!< Transmit CRC next */
+#define SPI_CR1_CRCEN ((uint32_t)0x00002000) /*!< Hardware CRC calculation enable */
+#define SPI_CR1_BIDIOE ((uint32_t)0x00004000) /*!< Output enable in bidirectional mode */
+#define SPI_CR1_BIDIMODE ((uint32_t)0x00008000) /*!< Bidirectional data mode enable */
+
+/******************* Bit definition for SPI_CR2 register *******************/
+#define SPI_CR2_RXDMAEN ((uint32_t)0x00000001) /*!< Rx Buffer DMA Enable */
+#define SPI_CR2_TXDMAEN ((uint32_t)0x00000002) /*!< Tx Buffer DMA Enable */
+#define SPI_CR2_SSOE ((uint32_t)0x00000004) /*!< SS Output Enable */
+#define SPI_CR2_NSSP ((uint32_t)0x00000008) /*!< NSS pulse management Enable */
+#define SPI_CR2_FRF ((uint32_t)0x00000010) /*!< Frame Format Enable */
+#define SPI_CR2_ERRIE ((uint32_t)0x00000020) /*!< Error Interrupt Enable */
+#define SPI_CR2_RXNEIE ((uint32_t)0x00000040) /*!< RX buffer Not Empty Interrupt Enable */
+#define SPI_CR2_TXEIE ((uint32_t)0x00000080) /*!< Tx buffer Empty Interrupt Enable */
+#define SPI_CR2_DS ((uint32_t)0x00000F00) /*!< DS[3:0] Data Size */
+#define SPI_CR2_DS_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define SPI_CR2_DS_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define SPI_CR2_DS_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define SPI_CR2_DS_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+#define SPI_CR2_FRXTH ((uint32_t)0x00001000) /*!< FIFO reception Threshold */
+#define SPI_CR2_LDMARX ((uint32_t)0x00002000) /*!< Last DMA transfer for reception */
+#define SPI_CR2_LDMATX ((uint32_t)0x00004000) /*!< Last DMA transfer for transmission */
+
+/******************** Bit definition for SPI_SR register *******************/
+#define SPI_SR_RXNE ((uint32_t)0x00000001) /*!< Receive buffer Not Empty */
+#define SPI_SR_TXE ((uint32_t)0x00000002) /*!< Transmit buffer Empty */
+#define SPI_SR_CHSIDE ((uint32_t)0x00000004) /*!< Channel side */
+#define SPI_SR_UDR ((uint32_t)0x00000008) /*!< Underrun flag */
+#define SPI_SR_CRCERR ((uint32_t)0x00000010) /*!< CRC Error flag */
+#define SPI_SR_MODF ((uint32_t)0x00000020) /*!< Mode fault */
+#define SPI_SR_OVR ((uint32_t)0x00000040) /*!< Overrun flag */
+#define SPI_SR_BSY ((uint32_t)0x00000080) /*!< Busy flag */
+#define SPI_SR_FRE ((uint32_t)0x00000100) /*!< TI frame format error */
+#define SPI_SR_FRLVL ((uint32_t)0x00000600) /*!< FIFO Reception Level */
+#define SPI_SR_FRLVL_0 ((uint32_t)0x00000200) /*!< Bit 0 */
+#define SPI_SR_FRLVL_1 ((uint32_t)0x00000400) /*!< Bit 1 */
+#define SPI_SR_FTLVL ((uint32_t)0x00001800) /*!< FIFO Transmission Level */
+#define SPI_SR_FTLVL_0 ((uint32_t)0x00000800) /*!< Bit 0 */
+#define SPI_SR_FTLVL_1 ((uint32_t)0x00001000) /*!< Bit 1 */
+
+/******************** Bit definition for SPI_DR register *******************/
+#define SPI_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data Register */
+
+/******************* Bit definition for SPI_CRCPR register *****************/
+#define SPI_CRCPR_CRCPOLY ((uint32_t)0xFFFFFFFF) /*!< CRC polynomial register */
+
+/****************** Bit definition for SPI_RXCRCR register *****************/
+#define SPI_RXCRCR_RXCRC ((uint32_t)0xFFFFFFFF) /*!< Rx CRC Register */
+
+/****************** Bit definition for SPI_TXCRCR register *****************/
+#define SPI_TXCRCR_TXCRC ((uint32_t)0xFFFFFFFF) /*!< Tx CRC Register */
+
+/****************** Bit definition for SPI_I2SCFGR register ****************/
+#define SPI_I2SCFGR_CHLEN ((uint32_t)0x00000001) /*!<Channel length (number of bits per audio channel) */
+#define SPI_I2SCFGR_DATLEN ((uint32_t)0x00000006) /*!<DATLEN[1:0] bits (Data length to be transferred) */
+#define SPI_I2SCFGR_DATLEN_0 ((uint32_t)0x00000002) /*!<Bit 0 */
+#define SPI_I2SCFGR_DATLEN_1 ((uint32_t)0x00000004) /*!<Bit 1 */
+#define SPI_I2SCFGR_CKPOL ((uint32_t)0x00000008) /*!<steady state clock polarity */
+#define SPI_I2SCFGR_I2SSTD ((uint32_t)0x00000030) /*!<I2SSTD[1:0] bits (I2S standard selection) */
+#define SPI_I2SCFGR_I2SSTD_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SSTD_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define SPI_I2SCFGR_PCMSYNC ((uint32_t)0x00000080) /*!<PCM frame synchronization */
+#define SPI_I2SCFGR_I2SCFG ((uint32_t)0x00000300) /*!<I2SCFG[1:0] bits (I2S configuration mode) */
+#define SPI_I2SCFGR_I2SCFG_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SCFG_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define SPI_I2SCFGR_I2SE ((uint32_t)0x00000400) /*!<I2S Enable */
+#define SPI_I2SCFGR_I2SMOD ((uint32_t)0x00000800) /*!<I2S mode selection */
+
+/****************** Bit definition for SPI_I2SPR register ******************/
+#define SPI_I2SPR_I2SDIV ((uint32_t)0x000000FF) /*!<I2S Linear prescaler */
+#define SPI_I2SPR_ODD ((uint32_t)0x00000100) /*!<Odd factor for the prescaler */
+#define SPI_I2SPR_MCKOE ((uint32_t)0x00000200) /*!<Master Clock Output Enable */
+
+/*****************************************************************************/
+/* */
+/* System Configuration (SYSCFG) */
+/* */
+/*****************************************************************************/
+/***************** Bit definition for SYSCFG_CFGR1 register ****************/
+#define SYSCFG_CFGR1_MEM_MODE ((uint32_t)0x00000003) /*!< SYSCFG_Memory Remap Config */
+#define SYSCFG_CFGR1_MEM_MODE_0 ((uint32_t)0x00000001) /*!< SYSCFG_Memory Remap Config Bit 0 */
+#define SYSCFG_CFGR1_MEM_MODE_1 ((uint32_t)0x00000002) /*!< SYSCFG_Memory Remap Config Bit 1 */
+
+#define SYSCFG_CFGR1_PA11_PA12_RMP ((uint32_t)0x00000010) /*!< PA11 and PA12 remap on QFN28 and TSSOP20 packages */
+
+#define SYSCFG_CFGR1_DMA_RMP ((uint32_t)0x00001F00) /*!< DMA remap mask */
+#define SYSCFG_CFGR1_ADC_DMA_RMP ((uint32_t)0x00000100) /*!< ADC DMA remap */
+#define SYSCFG_CFGR1_USART1TX_DMA_RMP ((uint32_t)0x00000200) /*!< USART1 TX DMA remap */
+#define SYSCFG_CFGR1_USART1RX_DMA_RMP ((uint32_t)0x00000400) /*!< USART1 RX DMA remap */
+#define SYSCFG_CFGR1_TIM16_DMA_RMP ((uint32_t)0x00000800) /*!< Timer 16 DMA remap */
+#define SYSCFG_CFGR1_TIM17_DMA_RMP ((uint32_t)0x00001000) /*!< Timer 17 DMA remap */
+
+#define SYSCFG_CFGR1_I2C_FMP_PB6 ((uint32_t)0x00010000) /*!< I2C PB6 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB7 ((uint32_t)0x00020000) /*!< I2C PB7 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB8 ((uint32_t)0x00040000) /*!< I2C PB8 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB9 ((uint32_t)0x00080000) /*!< I2C PB9 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_I2C1 ((uint32_t)0x00100000) /*!< Enable Fast Mode Plus on PB10, PB11, PF6 and PF7 */
+#define SYSCFG_CFGR1_I2C_FMP_I2C2 ((uint32_t)0x00200000) /*!< Enable I2C2 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PA9 ((uint32_t)0x00400000) /*!< Enable Fast Mode Plus on PA9 */
+#define SYSCFG_CFGR1_I2C_FMP_PA10 ((uint32_t)0x00800000) /*!< Enable Fast Mode Plus on PA10 */
+
+/***************** Bit definition for SYSCFG_EXTICR1 register **************/
+#define SYSCFG_EXTICR1_EXTI0 ((uint16_t)0x000F) /*!< EXTI 0 configuration */
+#define SYSCFG_EXTICR1_EXTI1 ((uint16_t)0x00F0) /*!< EXTI 1 configuration */
+#define SYSCFG_EXTICR1_EXTI2 ((uint16_t)0x0F00) /*!< EXTI 2 configuration */
+#define SYSCFG_EXTICR1_EXTI3 ((uint16_t)0xF000) /*!< EXTI 3 configuration */
+
+/**
+ * @brief EXTI0 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI0_PA ((uint16_t)0x0000) /*!< PA[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PB ((uint16_t)0x0001) /*!< PB[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PC ((uint16_t)0x0002) /*!< PC[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PD ((uint16_t)0x0003) /*!< PD[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PE ((uint16_t)0x0004) /*!< PE[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PF ((uint16_t)0x0005) /*!< PF[0] pin */
+
+/**
+ * @brief EXTI1 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI1_PA ((uint16_t)0x0000) /*!< PA[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PB ((uint16_t)0x0010) /*!< PB[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PC ((uint16_t)0x0020) /*!< PC[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PD ((uint16_t)0x0030) /*!< PD[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PE ((uint16_t)0x0040) /*!< PE[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PF ((uint16_t)0x0050) /*!< PF[1] pin */
+
+/**
+ * @brief EXTI2 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI2_PA ((uint16_t)0x0000) /*!< PA[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PB ((uint16_t)0x0100) /*!< PB[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PC ((uint16_t)0x0200) /*!< PC[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PD ((uint16_t)0x0300) /*!< PD[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PE ((uint16_t)0x0400) /*!< PE[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PF ((uint16_t)0x0500) /*!< PF[2] pin */
+
+/**
+ * @brief EXTI3 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI3_PA ((uint16_t)0x0000) /*!< PA[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PB ((uint16_t)0x1000) /*!< PB[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PC ((uint16_t)0x2000) /*!< PC[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PD ((uint16_t)0x3000) /*!< PD[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PE ((uint16_t)0x4000) /*!< PE[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PF ((uint16_t)0x5000) /*!< PF[3] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR2 register **************/
+#define SYSCFG_EXTICR2_EXTI4 ((uint16_t)0x000F) /*!< EXTI 4 configuration */
+#define SYSCFG_EXTICR2_EXTI5 ((uint16_t)0x00F0) /*!< EXTI 5 configuration */
+#define SYSCFG_EXTICR2_EXTI6 ((uint16_t)0x0F00) /*!< EXTI 6 configuration */
+#define SYSCFG_EXTICR2_EXTI7 ((uint16_t)0xF000) /*!< EXTI 7 configuration */
+
+/**
+ * @brief EXTI4 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI4_PA ((uint16_t)0x0000) /*!< PA[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PB ((uint16_t)0x0001) /*!< PB[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PC ((uint16_t)0x0002) /*!< PC[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PD ((uint16_t)0x0003) /*!< PD[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PE ((uint16_t)0x0004) /*!< PE[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PF ((uint16_t)0x0005) /*!< PF[4] pin */
+
+/**
+ * @brief EXTI5 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI5_PA ((uint16_t)0x0000) /*!< PA[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PB ((uint16_t)0x0010) /*!< PB[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PC ((uint16_t)0x0020) /*!< PC[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PD ((uint16_t)0x0030) /*!< PD[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PE ((uint16_t)0x0040) /*!< PE[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PF ((uint16_t)0x0050) /*!< PF[5] pin */
+
+/**
+ * @brief EXTI6 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI6_PA ((uint16_t)0x0000) /*!< PA[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PB ((uint16_t)0x0100) /*!< PB[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PC ((uint16_t)0x0200) /*!< PC[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PD ((uint16_t)0x0300) /*!< PD[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PE ((uint16_t)0x0400) /*!< PE[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PF ((uint16_t)0x0500) /*!< PF[6] pin */
+
+/**
+ * @brief EXTI7 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI7_PA ((uint16_t)0x0000) /*!< PA[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PB ((uint16_t)0x1000) /*!< PB[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PC ((uint16_t)0x2000) /*!< PC[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PD ((uint16_t)0x3000) /*!< PD[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PE ((uint16_t)0x4000) /*!< PE[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PF ((uint16_t)0x5000) /*!< PF[7] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR3 register **************/
+#define SYSCFG_EXTICR3_EXTI8 ((uint16_t)0x000F) /*!< EXTI 8 configuration */
+#define SYSCFG_EXTICR3_EXTI9 ((uint16_t)0x00F0) /*!< EXTI 9 configuration */
+#define SYSCFG_EXTICR3_EXTI10 ((uint16_t)0x0F00) /*!< EXTI 10 configuration */
+#define SYSCFG_EXTICR3_EXTI11 ((uint16_t)0xF000) /*!< EXTI 11 configuration */
+
+/**
+ * @brief EXTI8 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI8_PA ((uint16_t)0x0000) /*!< PA[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PB ((uint16_t)0x0001) /*!< PB[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PC ((uint16_t)0x0002) /*!< PC[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PD ((uint16_t)0x0003) /*!< PD[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PE ((uint16_t)0x0004) /*!< PE[8] pin */
+
+/**
+ * @brief EXTI9 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI9_PA ((uint16_t)0x0000) /*!< PA[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PB ((uint16_t)0x0010) /*!< PB[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PC ((uint16_t)0x0020) /*!< PC[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PD ((uint16_t)0x0030) /*!< PD[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PE ((uint16_t)0x0040) /*!< PE[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PF ((uint16_t)0x0050) /*!< PF[9] pin */
+
+/**
+ * @brief EXTI10 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI10_PA ((uint16_t)0x0000) /*!< PA[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PB ((uint16_t)0x0100) /*!< PB[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PC ((uint16_t)0x0200) /*!< PC[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PD ((uint16_t)0x0300) /*!< PE[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PE ((uint16_t)0x0400) /*!< PD[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PF ((uint16_t)0x0500) /*!< PF[10] pin */
+
+/**
+ * @brief EXTI11 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI11_PA ((uint16_t)0x0000) /*!< PA[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PB ((uint16_t)0x1000) /*!< PB[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PC ((uint16_t)0x2000) /*!< PC[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PD ((uint16_t)0x3000) /*!< PD[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PE ((uint16_t)0x4000) /*!< PE[11] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR4 register **************/
+#define SYSCFG_EXTICR4_EXTI12 ((uint16_t)0x000F) /*!< EXTI 12 configuration */
+#define SYSCFG_EXTICR4_EXTI13 ((uint16_t)0x00F0) /*!< EXTI 13 configuration */
+#define SYSCFG_EXTICR4_EXTI14 ((uint16_t)0x0F00) /*!< EXTI 14 configuration */
+#define SYSCFG_EXTICR4_EXTI15 ((uint16_t)0xF000) /*!< EXTI 15 configuration */
+
+/**
+ * @brief EXTI12 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI12_PA ((uint16_t)0x0000) /*!< PA[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PB ((uint16_t)0x0001) /*!< PB[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PC ((uint16_t)0x0002) /*!< PC[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PD ((uint16_t)0x0003) /*!< PD[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PE ((uint16_t)0x0004) /*!< PE[12] pin */
+
+/**
+ * @brief EXTI13 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI13_PA ((uint16_t)0x0000) /*!< PA[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PB ((uint16_t)0x0010) /*!< PB[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PC ((uint16_t)0x0020) /*!< PC[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PD ((uint16_t)0x0030) /*!< PD[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PE ((uint16_t)0x0040) /*!< PE[13] pin */
+
+/**
+ * @brief EXTI14 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI14_PA ((uint16_t)0x0000) /*!< PA[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PB ((uint16_t)0x0100) /*!< PB[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PC ((uint16_t)0x0200) /*!< PC[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PD ((uint16_t)0x0300) /*!< PD[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PE ((uint16_t)0x0400) /*!< PE[14] pin */
+
+/**
+ * @brief EXTI15 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI15_PA ((uint16_t)0x0000) /*!< PA[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PB ((uint16_t)0x1000) /*!< PB[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PC ((uint16_t)0x2000) /*!< PC[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PD ((uint16_t)0x3000) /*!< PD[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PE ((uint16_t)0x4000) /*!< PE[15] pin */
+
+/***************** Bit definition for SYSCFG_CFGR2 register ****************/
+#define SYSCFG_CFGR2_LOCKUP_LOCK ((uint32_t)0x00000001) /*!< Enables and locks the LOCKUP (Hardfault) output of CortexM0 with Break Input of TIMER1 */
+#define SYSCFG_CFGR2_SRAM_PARITY_LOCK ((uint32_t)0x00000002) /*!< Enables and locks the SRAM_PARITY error signal with Break Input of TIMER1 */
+#define SYSCFG_CFGR2_PVD_LOCK ((uint32_t)0x00000004) /*!< Enables and locks the PVD connection with Timer1 Break Input and also the PVD_EN and PVDSEL[2:0] bits of the Power Control Interface */
+#define SYSCFG_CFGR2_SRAM_PEF ((uint32_t)0x00000100) /*!< SRAM Parity error flag */
+#define SYSCFG_CFGR2_SRAM_PE SYSCFG_CFGR2_SRAM_PEF /*!< SRAM Parity error flag (define maintained for legacy purpose) */
+
+/*****************************************************************************/
+/* */
+/* Timers (TIM) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for TIM_CR1 register *******************/
+#define TIM_CR1_CEN ((uint32_t)0x00000001) /*!<Counter enable */
+#define TIM_CR1_UDIS ((uint32_t)0x00000002) /*!<Update disable */
+#define TIM_CR1_URS ((uint32_t)0x00000004) /*!<Update request source */
+#define TIM_CR1_OPM ((uint32_t)0x00000008) /*!<One pulse mode */
+#define TIM_CR1_DIR ((uint32_t)0x00000010) /*!<Direction */
+
+#define TIM_CR1_CMS ((uint32_t)0x00000060) /*!<CMS[1:0] bits (Center-aligned mode selection) */
+#define TIM_CR1_CMS_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define TIM_CR1_CMS_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+
+#define TIM_CR1_ARPE ((uint32_t)0x00000080) /*!<Auto-reload preload enable */
+
+#define TIM_CR1_CKD ((uint32_t)0x00000300) /*!<CKD[1:0] bits (clock division) */
+#define TIM_CR1_CKD_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CR1_CKD_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+/******************* Bit definition for TIM_CR2 register *******************/
+#define TIM_CR2_CCPC ((uint32_t)0x00000001) /*!<Capture/Compare Preloaded Control */
+#define TIM_CR2_CCUS ((uint32_t)0x00000004) /*!<Capture/Compare Control Update Selection */
+#define TIM_CR2_CCDS ((uint32_t)0x00000008) /*!<Capture/Compare DMA Selection */
+
+#define TIM_CR2_MMS ((uint32_t)0x00000070) /*!<MMS[2:0] bits (Master Mode Selection) */
+#define TIM_CR2_MMS_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CR2_MMS_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CR2_MMS_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CR2_TI1S ((uint32_t)0x00000080) /*!<TI1 Selection */
+#define TIM_CR2_OIS1 ((uint32_t)0x00000100) /*!<Output Idle state 1 (OC1 output) */
+#define TIM_CR2_OIS1N ((uint32_t)0x00000200) /*!<Output Idle state 1 (OC1N output) */
+#define TIM_CR2_OIS2 ((uint32_t)0x00000400) /*!<Output Idle state 2 (OC2 output) */
+#define TIM_CR2_OIS2N ((uint32_t)0x00000800) /*!<Output Idle state 2 (OC2N output) */
+#define TIM_CR2_OIS3 ((uint32_t)0x00001000) /*!<Output Idle state 3 (OC3 output) */
+#define TIM_CR2_OIS3N ((uint32_t)0x00002000) /*!<Output Idle state 3 (OC3N output) */
+#define TIM_CR2_OIS4 ((uint32_t)0x00004000) /*!<Output Idle state 4 (OC4 output) */
+
+/******************* Bit definition for TIM_SMCR register ******************/
+#define TIM_SMCR_SMS ((uint32_t)0x00000007) /*!<SMS[2:0] bits (Slave mode selection) */
+#define TIM_SMCR_SMS_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_SMCR_SMS_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_SMCR_SMS_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+
+#define TIM_SMCR_OCCS ((uint32_t)0x00000008) /*!< OCREF clear selection */
+
+#define TIM_SMCR_TS ((uint32_t)0x00000070) /*!<TS[2:0] bits (Trigger selection) */
+#define TIM_SMCR_TS_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_SMCR_TS_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_SMCR_TS_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_SMCR_MSM ((uint32_t)0x00000080) /*!<Master/slave mode */
+
+#define TIM_SMCR_ETF ((uint32_t)0x00000F00) /*!<ETF[3:0] bits (External trigger filter) */
+#define TIM_SMCR_ETF_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_SMCR_ETF_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define TIM_SMCR_ETF_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define TIM_SMCR_ETF_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+
+#define TIM_SMCR_ETPS ((uint32_t)0x00003000) /*!<ETPS[1:0] bits (External trigger prescaler) */
+#define TIM_SMCR_ETPS_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_SMCR_ETPS_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+
+#define TIM_SMCR_ECE ((uint32_t)0x00004000) /*!<External clock enable */
+#define TIM_SMCR_ETP ((uint32_t)0x00008000) /*!<External trigger polarity */
+
+/******************* Bit definition for TIM_DIER register ******************/
+#define TIM_DIER_UIE ((uint32_t)0x00000001) /*!<Update interrupt enable */
+#define TIM_DIER_CC1IE ((uint32_t)0x00000002) /*!<Capture/Compare 1 interrupt enable */
+#define TIM_DIER_CC2IE ((uint32_t)0x00000004) /*!<Capture/Compare 2 interrupt enable */
+#define TIM_DIER_CC3IE ((uint32_t)0x00000008) /*!<Capture/Compare 3 interrupt enable */
+#define TIM_DIER_CC4IE ((uint32_t)0x00000010) /*!<Capture/Compare 4 interrupt enable */
+#define TIM_DIER_COMIE ((uint32_t)0x00000020) /*!<COM interrupt enable */
+#define TIM_DIER_TIE ((uint32_t)0x00000040) /*!<Trigger interrupt enable */
+#define TIM_DIER_BIE ((uint32_t)0x00000080) /*!<Break interrupt enable */
+#define TIM_DIER_UDE ((uint32_t)0x00000100) /*!<Update DMA request enable */
+#define TIM_DIER_CC1DE ((uint32_t)0x00000200) /*!<Capture/Compare 1 DMA request enable */
+#define TIM_DIER_CC2DE ((uint32_t)0x00000400) /*!<Capture/Compare 2 DMA request enable */
+#define TIM_DIER_CC3DE ((uint32_t)0x00000800) /*!<Capture/Compare 3 DMA request enable */
+#define TIM_DIER_CC4DE ((uint32_t)0x00001000) /*!<Capture/Compare 4 DMA request enable */
+#define TIM_DIER_COMDE ((uint32_t)0x00002000) /*!<COM DMA request enable */
+#define TIM_DIER_TDE ((uint32_t)0x00004000) /*!<Trigger DMA request enable */
+
+/******************** Bit definition for TIM_SR register *******************/
+#define TIM_SR_UIF ((uint32_t)0x00000001) /*!<Update interrupt Flag */
+#define TIM_SR_CC1IF ((uint32_t)0x00000002) /*!<Capture/Compare 1 interrupt Flag */
+#define TIM_SR_CC2IF ((uint32_t)0x00000004) /*!<Capture/Compare 2 interrupt Flag */
+#define TIM_SR_CC3IF ((uint32_t)0x00000008) /*!<Capture/Compare 3 interrupt Flag */
+#define TIM_SR_CC4IF ((uint32_t)0x00000010) /*!<Capture/Compare 4 interrupt Flag */
+#define TIM_SR_COMIF ((uint32_t)0x00000020) /*!<COM interrupt Flag */
+#define TIM_SR_TIF ((uint32_t)0x00000040) /*!<Trigger interrupt Flag */
+#define TIM_SR_BIF ((uint32_t)0x00000080) /*!<Break interrupt Flag */
+#define TIM_SR_CC1OF ((uint32_t)0x00000200) /*!<Capture/Compare 1 Overcapture Flag */
+#define TIM_SR_CC2OF ((uint32_t)0x00000400) /*!<Capture/Compare 2 Overcapture Flag */
+#define TIM_SR_CC3OF ((uint32_t)0x00000800) /*!<Capture/Compare 3 Overcapture Flag */
+#define TIM_SR_CC4OF ((uint32_t)0x00001000) /*!<Capture/Compare 4 Overcapture Flag */
+
+/******************* Bit definition for TIM_EGR register *******************/
+#define TIM_EGR_UG ((uint32_t)0x00000001) /*!<Update Generation */
+#define TIM_EGR_CC1G ((uint32_t)0x00000002) /*!<Capture/Compare 1 Generation */
+#define TIM_EGR_CC2G ((uint32_t)0x00000004) /*!<Capture/Compare 2 Generation */
+#define TIM_EGR_CC3G ((uint32_t)0x00000008) /*!<Capture/Compare 3 Generation */
+#define TIM_EGR_CC4G ((uint32_t)0x00000010) /*!<Capture/Compare 4 Generation */
+#define TIM_EGR_COMG ((uint32_t)0x00000020) /*!<Capture/Compare Control Update Generation */
+#define TIM_EGR_TG ((uint32_t)0x00000040) /*!<Trigger Generation */
+#define TIM_EGR_BG ((uint32_t)0x00000080) /*!<Break Generation */
+
+/****************** Bit definition for TIM_CCMR1 register ******************/
+#define TIM_CCMR1_CC1S ((uint32_t)0x00000003) /*!<CC1S[1:0] bits (Capture/Compare 1 Selection) */
+#define TIM_CCMR1_CC1S_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_CCMR1_CC1S_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC1FE ((uint32_t)0x00000004) /*!<Output Compare 1 Fast enable */
+#define TIM_CCMR1_OC1PE ((uint32_t)0x00000008) /*!<Output Compare 1 Preload enable */
+
+#define TIM_CCMR1_OC1M ((uint32_t)0x00000070) /*!<OC1M[2:0] bits (Output Compare 1 Mode) */
+#define TIM_CCMR1_OC1M_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR1_OC1M_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR1_OC1M_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CCMR1_OC1CE ((uint32_t)0x00000080) /*!<Output Compare 1Clear Enable */
+
+#define TIM_CCMR1_CC2S ((uint32_t)0x00000300) /*!<CC2S[1:0] bits (Capture/Compare 2 Selection) */
+#define TIM_CCMR1_CC2S_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CCMR1_CC2S_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC2FE ((uint32_t)0x00000400) /*!<Output Compare 2 Fast enable */
+#define TIM_CCMR1_OC2PE ((uint32_t)0x00000800) /*!<Output Compare 2 Preload enable */
+
+#define TIM_CCMR1_OC2M ((uint32_t)0x00007000) /*!<OC2M[2:0] bits (Output Compare 2 Mode) */
+#define TIM_CCMR1_OC2M_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR1_OC2M_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR1_OC2M_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+
+#define TIM_CCMR1_OC2CE ((uint32_t)0x00008000) /*!<Output Compare 2 Clear Enable */
+
+/*---------------------------------------------------------------------------*/
+
+#define TIM_CCMR1_IC1PSC ((uint32_t)0x0000000C) /*!<IC1PSC[1:0] bits (Input Capture 1 Prescaler) */
+#define TIM_CCMR1_IC1PSC_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define TIM_CCMR1_IC1PSC_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC1F ((uint32_t)0x000000F0) /*!<IC1F[3:0] bits (Input Capture 1 Filter) */
+#define TIM_CCMR1_IC1F_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR1_IC1F_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR1_IC1F_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define TIM_CCMR1_IC1F_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define TIM_CCMR1_IC2PSC ((uint32_t)0x00000C00) /*!<IC2PSC[1:0] bits (Input Capture 2 Prescaler) */
+#define TIM_CCMR1_IC2PSC_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define TIM_CCMR1_IC2PSC_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC2F ((uint32_t)0x0000F000) /*!<IC2F[3:0] bits (Input Capture 2 Filter) */
+#define TIM_CCMR1_IC2F_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR1_IC2F_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR1_IC2F_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define TIM_CCMR1_IC2F_3 ((uint32_t)0x00008000) /*!<Bit 3 */
+
+/****************** Bit definition for TIM_CCMR2 register ******************/
+#define TIM_CCMR2_CC3S ((uint32_t)0x00000003) /*!<CC3S[1:0] bits (Capture/Compare 3 Selection) */
+#define TIM_CCMR2_CC3S_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_CCMR2_CC3S_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC3FE ((uint32_t)0x00000004) /*!<Output Compare 3 Fast enable */
+#define TIM_CCMR2_OC3PE ((uint32_t)0x00000008) /*!<Output Compare 3 Preload enable */
+
+#define TIM_CCMR2_OC3M ((uint32_t)0x00000070) /*!<OC3M[2:0] bits (Output Compare 3 Mode) */
+#define TIM_CCMR2_OC3M_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR2_OC3M_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR2_OC3M_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CCMR2_OC3CE ((uint32_t)0x00000080) /*!<Output Compare 3 Clear Enable */
+
+#define TIM_CCMR2_CC4S ((uint32_t)0x00000300) /*!<CC4S[1:0] bits (Capture/Compare 4 Selection) */
+#define TIM_CCMR2_CC4S_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CCMR2_CC4S_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC4FE ((uint32_t)0x00000400) /*!<Output Compare 4 Fast enable */
+#define TIM_CCMR2_OC4PE ((uint32_t)0x00000800) /*!<Output Compare 4 Preload enable */
+
+#define TIM_CCMR2_OC4M ((uint32_t)0x00007000) /*!<OC4M[2:0] bits (Output Compare 4 Mode) */
+#define TIM_CCMR2_OC4M_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR2_OC4M_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR2_OC4M_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+
+#define TIM_CCMR2_OC4CE ((uint32_t)0x00008000) /*!<Output Compare 4 Clear Enable */
+
+/*---------------------------------------------------------------------------*/
+
+#define TIM_CCMR2_IC3PSC ((uint32_t)0x0000000C) /*!<IC3PSC[1:0] bits (Input Capture 3 Prescaler) */
+#define TIM_CCMR2_IC3PSC_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define TIM_CCMR2_IC3PSC_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC3F ((uint32_t)0x000000F0) /*!<IC3F[3:0] bits (Input Capture 3 Filter) */
+#define TIM_CCMR2_IC3F_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR2_IC3F_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR2_IC3F_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define TIM_CCMR2_IC3F_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define TIM_CCMR2_IC4PSC ((uint32_t)0x00000C00) /*!<IC4PSC[1:0] bits (Input Capture 4 Prescaler) */
+#define TIM_CCMR2_IC4PSC_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define TIM_CCMR2_IC4PSC_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC4F ((uint32_t)0x0000F000) /*!<IC4F[3:0] bits (Input Capture 4 Filter) */
+#define TIM_CCMR2_IC4F_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR2_IC4F_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR2_IC4F_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define TIM_CCMR2_IC4F_3 ((uint32_t)0x00008000) /*!<Bit 3 */
+
+/******************* Bit definition for TIM_CCER register ******************/
+#define TIM_CCER_CC1E ((uint32_t)0x00000001) /*!<Capture/Compare 1 output enable */
+#define TIM_CCER_CC1P ((uint32_t)0x00000002) /*!<Capture/Compare 1 output Polarity */
+#define TIM_CCER_CC1NE ((uint32_t)0x00000004) /*!<Capture/Compare 1 Complementary output enable */
+#define TIM_CCER_CC1NP ((uint32_t)0x00000008) /*!<Capture/Compare 1 Complementary output Polarity */
+#define TIM_CCER_CC2E ((uint32_t)0x00000010) /*!<Capture/Compare 2 output enable */
+#define TIM_CCER_CC2P ((uint32_t)0x00000020) /*!<Capture/Compare 2 output Polarity */
+#define TIM_CCER_CC2NE ((uint32_t)0x00000040) /*!<Capture/Compare 2 Complementary output enable */
+#define TIM_CCER_CC2NP ((uint32_t)0x00000080) /*!<Capture/Compare 2 Complementary output Polarity */
+#define TIM_CCER_CC3E ((uint32_t)0x00000100) /*!<Capture/Compare 3 output enable */
+#define TIM_CCER_CC3P ((uint32_t)0x00000200) /*!<Capture/Compare 3 output Polarity */
+#define TIM_CCER_CC3NE ((uint32_t)0x00000400) /*!<Capture/Compare 3 Complementary output enable */
+#define TIM_CCER_CC3NP ((uint32_t)0x00000800) /*!<Capture/Compare 3 Complementary output Polarity */
+#define TIM_CCER_CC4E ((uint32_t)0x00001000) /*!<Capture/Compare 4 output enable */
+#define TIM_CCER_CC4P ((uint32_t)0x00002000) /*!<Capture/Compare 4 output Polarity */
+#define TIM_CCER_CC4NP ((uint32_t)0x00008000) /*!<Capture/Compare 4 Complementary output Polarity */
+
+/******************* Bit definition for TIM_CNT register *******************/
+#define TIM_CNT_CNT ((uint32_t)0xFFFFFFFF) /*!<Counter Value */
+
+/******************* Bit definition for TIM_PSC register *******************/
+#define TIM_PSC_PSC ((uint32_t)0x0000FFFF) /*!<Prescaler Value */
+
+/******************* Bit definition for TIM_ARR register *******************/
+#define TIM_ARR_ARR ((uint32_t)0xFFFFFFFF) /*!<actual auto-reload Value */
+
+/******************* Bit definition for TIM_RCR register *******************/
+#define TIM_RCR_REP ((uint32_t)0x000000FF) /*!<Repetition Counter Value */
+
+/******************* Bit definition for TIM_CCR1 register ******************/
+#define TIM_CCR1_CCR1 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 1 Value */
+
+/******************* Bit definition for TIM_CCR2 register ******************/
+#define TIM_CCR2_CCR2 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 2 Value */
+
+/******************* Bit definition for TIM_CCR3 register ******************/
+#define TIM_CCR3_CCR3 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 3 Value */
+
+/******************* Bit definition for TIM_CCR4 register ******************/
+#define TIM_CCR4_CCR4 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 4 Value */
+
+/******************* Bit definition for TIM_BDTR register ******************/
+#define TIM_BDTR_DTG ((uint32_t)0x000000FF) /*!<DTG[0:7] bits (Dead-Time Generator set-up) */
+#define TIM_BDTR_DTG_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_BDTR_DTG_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_BDTR_DTG_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define TIM_BDTR_DTG_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define TIM_BDTR_DTG_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define TIM_BDTR_DTG_5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define TIM_BDTR_DTG_6 ((uint32_t)0x00000040) /*!<Bit 6 */
+#define TIM_BDTR_DTG_7 ((uint32_t)0x00000080) /*!<Bit 7 */
+
+#define TIM_BDTR_LOCK ((uint32_t)0x00000300) /*!<LOCK[1:0] bits (Lock Configuration) */
+#define TIM_BDTR_LOCK_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_BDTR_LOCK_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_BDTR_OSSI ((uint32_t)0x00000400) /*!<Off-State Selection for Idle mode */
+#define TIM_BDTR_OSSR ((uint32_t)0x00000800) /*!<Off-State Selection for Run mode */
+#define TIM_BDTR_BKE ((uint32_t)0x00001000) /*!<Break enable */
+#define TIM_BDTR_BKP ((uint32_t)0x00002000) /*!<Break Polarity */
+#define TIM_BDTR_AOE ((uint32_t)0x00004000) /*!<Automatic Output enable */
+#define TIM_BDTR_MOE ((uint32_t)0x00008000) /*!<Main Output enable */
+
+/******************* Bit definition for TIM_DCR register *******************/
+#define TIM_DCR_DBA ((uint32_t)0x0000001F) /*!<DBA[4:0] bits (DMA Base Address) */
+#define TIM_DCR_DBA_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_DCR_DBA_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_DCR_DBA_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define TIM_DCR_DBA_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define TIM_DCR_DBA_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+
+#define TIM_DCR_DBL ((uint32_t)0x00001F00) /*!<DBL[4:0] bits (DMA Burst Length) */
+#define TIM_DCR_DBL_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_DCR_DBL_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define TIM_DCR_DBL_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define TIM_DCR_DBL_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define TIM_DCR_DBL_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+
+/******************* Bit definition for TIM_DMAR register ******************/
+#define TIM_DMAR_DMAB ((uint32_t)0x0000FFFF) /*!<DMA register for burst accesses */
+
+/******************* Bit definition for TIM14_OR register ********************/
+#define TIM14_OR_TI1_RMP ((uint32_t)0x00000003) /*!<TI1_RMP[1:0] bits (TIM14 Input 4 remap) */
+#define TIM14_OR_TI1_RMP_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM14_OR_TI1_RMP_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+/******************************************************************************/
+/* */
+/* Touch Sensing Controller (TSC) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for TSC_CR register *********************/
+#define TSC_CR_TSCE ((uint32_t)0x00000001) /*!<Touch sensing controller enable */
+#define TSC_CR_START ((uint32_t)0x00000002) /*!<Start acquisition */
+#define TSC_CR_AM ((uint32_t)0x00000004) /*!<Acquisition mode */
+#define TSC_CR_SYNCPOL ((uint32_t)0x00000008) /*!<Synchronization pin polarity */
+#define TSC_CR_IODEF ((uint32_t)0x00000010) /*!<IO default mode */
+
+#define TSC_CR_MCV ((uint32_t)0x000000E0) /*!<MCV[2:0] bits (Max Count Value) */
+#define TSC_CR_MCV_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define TSC_CR_MCV_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+#define TSC_CR_MCV_2 ((uint32_t)0x00000080) /*!<Bit 2 */
+
+#define TSC_CR_PGPSC ((uint32_t)0x00007000) /*!<PGPSC[2:0] bits (Pulse Generator Prescaler) */
+#define TSC_CR_PGPSC_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TSC_CR_PGPSC_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TSC_CR_PGPSC_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+
+#define TSC_CR_SSPSC ((uint32_t)0x00008000) /*!<Spread Spectrum Prescaler */
+#define TSC_CR_SSE ((uint32_t)0x00010000) /*!<Spread Spectrum Enable */
+
+#define TSC_CR_SSD ((uint32_t)0x00FE0000) /*!<SSD[6:0] bits (Spread Spectrum Deviation) */
+#define TSC_CR_SSD_0 ((uint32_t)0x00020000) /*!<Bit 0 */
+#define TSC_CR_SSD_1 ((uint32_t)0x00040000) /*!<Bit 1 */
+#define TSC_CR_SSD_2 ((uint32_t)0x00080000) /*!<Bit 2 */
+#define TSC_CR_SSD_3 ((uint32_t)0x00100000) /*!<Bit 3 */
+#define TSC_CR_SSD_4 ((uint32_t)0x00200000) /*!<Bit 4 */
+#define TSC_CR_SSD_5 ((uint32_t)0x00400000) /*!<Bit 5 */
+#define TSC_CR_SSD_6 ((uint32_t)0x00800000) /*!<Bit 6 */
+
+#define TSC_CR_CTPL ((uint32_t)0x0F000000) /*!<CTPL[3:0] bits (Charge Transfer pulse low) */
+#define TSC_CR_CTPL_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define TSC_CR_CTPL_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define TSC_CR_CTPL_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define TSC_CR_CTPL_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+
+#define TSC_CR_CTPH ((uint32_t)0xF0000000) /*!<CTPH[3:0] bits (Charge Transfer pulse high) */
+#define TSC_CR_CTPH_0 ((uint32_t)0x10000000) /*!<Bit 0 */
+#define TSC_CR_CTPH_1 ((uint32_t)0x20000000) /*!<Bit 1 */
+#define TSC_CR_CTPH_2 ((uint32_t)0x40000000) /*!<Bit 2 */
+#define TSC_CR_CTPH_3 ((uint32_t)0x80000000) /*!<Bit 3 */
+
+/******************* Bit definition for TSC_IER register ********************/
+#define TSC_IER_EOAIE ((uint32_t)0x00000001) /*!<End of acquisition interrupt enable */
+#define TSC_IER_MCEIE ((uint32_t)0x00000002) /*!<Max count error interrupt enable */
+
+/******************* Bit definition for TSC_ICR register ********************/
+#define TSC_ICR_EOAIC ((uint32_t)0x00000001) /*!<End of acquisition interrupt clear */
+#define TSC_ICR_MCEIC ((uint32_t)0x00000002) /*!<Max count error interrupt clear */
+
+/******************* Bit definition for TSC_ISR register ********************/
+#define TSC_ISR_EOAF ((uint32_t)0x00000001) /*!<End of acquisition flag */
+#define TSC_ISR_MCEF ((uint32_t)0x00000002) /*!<Max count error flag */
+
+/******************* Bit definition for TSC_IOHCR register ******************/
+#define TSC_IOHCR_G1_IO1 ((uint32_t)0x00000001) /*!<GROUP1_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G1_IO2 ((uint32_t)0x00000002) /*!<GROUP1_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G1_IO3 ((uint32_t)0x00000004) /*!<GROUP1_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G1_IO4 ((uint32_t)0x00000008) /*!<GROUP1_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G2_IO1 ((uint32_t)0x00000010) /*!<GROUP2_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G2_IO2 ((uint32_t)0x00000020) /*!<GROUP2_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G2_IO3 ((uint32_t)0x00000040) /*!<GROUP2_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G2_IO4 ((uint32_t)0x00000080) /*!<GROUP2_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G3_IO1 ((uint32_t)0x00000100) /*!<GROUP3_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G3_IO2 ((uint32_t)0x00000200) /*!<GROUP3_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G3_IO3 ((uint32_t)0x00000400) /*!<GROUP3_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G3_IO4 ((uint32_t)0x00000800) /*!<GROUP3_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G4_IO1 ((uint32_t)0x00001000) /*!<GROUP4_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G4_IO2 ((uint32_t)0x00002000) /*!<GROUP4_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G4_IO3 ((uint32_t)0x00004000) /*!<GROUP4_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G4_IO4 ((uint32_t)0x00008000) /*!<GROUP4_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G5_IO1 ((uint32_t)0x00010000) /*!<GROUP5_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G5_IO2 ((uint32_t)0x00020000) /*!<GROUP5_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G5_IO3 ((uint32_t)0x00040000) /*!<GROUP5_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G5_IO4 ((uint32_t)0x00080000) /*!<GROUP5_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G6_IO1 ((uint32_t)0x00100000) /*!<GROUP6_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G6_IO2 ((uint32_t)0x00200000) /*!<GROUP6_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G6_IO3 ((uint32_t)0x00400000) /*!<GROUP6_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G6_IO4 ((uint32_t)0x00800000) /*!<GROUP6_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G7_IO1 ((uint32_t)0x01000000) /*!<GROUP7_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G7_IO2 ((uint32_t)0x02000000) /*!<GROUP7_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G7_IO3 ((uint32_t)0x04000000) /*!<GROUP7_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G7_IO4 ((uint32_t)0x08000000) /*!<GROUP7_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G8_IO1 ((uint32_t)0x10000000) /*!<GROUP8_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G8_IO2 ((uint32_t)0x20000000) /*!<GROUP8_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G8_IO3 ((uint32_t)0x40000000) /*!<GROUP8_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G8_IO4 ((uint32_t)0x80000000) /*!<GROUP8_IO4 schmitt trigger hysteresis mode */
+
+/******************* Bit definition for TSC_IOASCR register *****************/
+#define TSC_IOASCR_G1_IO1 ((uint32_t)0x00000001) /*!<GROUP1_IO1 analog switch enable */
+#define TSC_IOASCR_G1_IO2 ((uint32_t)0x00000002) /*!<GROUP1_IO2 analog switch enable */
+#define TSC_IOASCR_G1_IO3 ((uint32_t)0x00000004) /*!<GROUP1_IO3 analog switch enable */
+#define TSC_IOASCR_G1_IO4 ((uint32_t)0x00000008) /*!<GROUP1_IO4 analog switch enable */
+#define TSC_IOASCR_G2_IO1 ((uint32_t)0x00000010) /*!<GROUP2_IO1 analog switch enable */
+#define TSC_IOASCR_G2_IO2 ((uint32_t)0x00000020) /*!<GROUP2_IO2 analog switch enable */
+#define TSC_IOASCR_G2_IO3 ((uint32_t)0x00000040) /*!<GROUP2_IO3 analog switch enable */
+#define TSC_IOASCR_G2_IO4 ((uint32_t)0x00000080) /*!<GROUP2_IO4 analog switch enable */
+#define TSC_IOASCR_G3_IO1 ((uint32_t)0x00000100) /*!<GROUP3_IO1 analog switch enable */
+#define TSC_IOASCR_G3_IO2 ((uint32_t)0x00000200) /*!<GROUP3_IO2 analog switch enable */
+#define TSC_IOASCR_G3_IO3 ((uint32_t)0x00000400) /*!<GROUP3_IO3 analog switch enable */
+#define TSC_IOASCR_G3_IO4 ((uint32_t)0x00000800) /*!<GROUP3_IO4 analog switch enable */
+#define TSC_IOASCR_G4_IO1 ((uint32_t)0x00001000) /*!<GROUP4_IO1 analog switch enable */
+#define TSC_IOASCR_G4_IO2 ((uint32_t)0x00002000) /*!<GROUP4_IO2 analog switch enable */
+#define TSC_IOASCR_G4_IO3 ((uint32_t)0x00004000) /*!<GROUP4_IO3 analog switch enable */
+#define TSC_IOASCR_G4_IO4 ((uint32_t)0x00008000) /*!<GROUP4_IO4 analog switch enable */
+#define TSC_IOASCR_G5_IO1 ((uint32_t)0x00010000) /*!<GROUP5_IO1 analog switch enable */
+#define TSC_IOASCR_G5_IO2 ((uint32_t)0x00020000) /*!<GROUP5_IO2 analog switch enable */
+#define TSC_IOASCR_G5_IO3 ((uint32_t)0x00040000) /*!<GROUP5_IO3 analog switch enable */
+#define TSC_IOASCR_G5_IO4 ((uint32_t)0x00080000) /*!<GROUP5_IO4 analog switch enable */
+#define TSC_IOASCR_G6_IO1 ((uint32_t)0x00100000) /*!<GROUP6_IO1 analog switch enable */
+#define TSC_IOASCR_G6_IO2 ((uint32_t)0x00200000) /*!<GROUP6_IO2 analog switch enable */
+#define TSC_IOASCR_G6_IO3 ((uint32_t)0x00400000) /*!<GROUP6_IO3 analog switch enable */
+#define TSC_IOASCR_G6_IO4 ((uint32_t)0x00800000) /*!<GROUP6_IO4 analog switch enable */
+#define TSC_IOASCR_G7_IO1 ((uint32_t)0x01000000) /*!<GROUP7_IO1 analog switch enable */
+#define TSC_IOASCR_G7_IO2 ((uint32_t)0x02000000) /*!<GROUP7_IO2 analog switch enable */
+#define TSC_IOASCR_G7_IO3 ((uint32_t)0x04000000) /*!<GROUP7_IO3 analog switch enable */
+#define TSC_IOASCR_G7_IO4 ((uint32_t)0x08000000) /*!<GROUP7_IO4 analog switch enable */
+#define TSC_IOASCR_G8_IO1 ((uint32_t)0x10000000) /*!<GROUP8_IO1 analog switch enable */
+#define TSC_IOASCR_G8_IO2 ((uint32_t)0x20000000) /*!<GROUP8_IO2 analog switch enable */
+#define TSC_IOASCR_G8_IO3 ((uint32_t)0x40000000) /*!<GROUP8_IO3 analog switch enable */
+#define TSC_IOASCR_G8_IO4 ((uint32_t)0x80000000) /*!<GROUP8_IO4 analog switch enable */
+
+/******************* Bit definition for TSC_IOSCR register ******************/
+#define TSC_IOSCR_G1_IO1 ((uint32_t)0x00000001) /*!<GROUP1_IO1 sampling mode */
+#define TSC_IOSCR_G1_IO2 ((uint32_t)0x00000002) /*!<GROUP1_IO2 sampling mode */
+#define TSC_IOSCR_G1_IO3 ((uint32_t)0x00000004) /*!<GROUP1_IO3 sampling mode */
+#define TSC_IOSCR_G1_IO4 ((uint32_t)0x00000008) /*!<GROUP1_IO4 sampling mode */
+#define TSC_IOSCR_G2_IO1 ((uint32_t)0x00000010) /*!<GROUP2_IO1 sampling mode */
+#define TSC_IOSCR_G2_IO2 ((uint32_t)0x00000020) /*!<GROUP2_IO2 sampling mode */
+#define TSC_IOSCR_G2_IO3 ((uint32_t)0x00000040) /*!<GROUP2_IO3 sampling mode */
+#define TSC_IOSCR_G2_IO4 ((uint32_t)0x00000080) /*!<GROUP2_IO4 sampling mode */
+#define TSC_IOSCR_G3_IO1 ((uint32_t)0x00000100) /*!<GROUP3_IO1 sampling mode */
+#define TSC_IOSCR_G3_IO2 ((uint32_t)0x00000200) /*!<GROUP3_IO2 sampling mode */
+#define TSC_IOSCR_G3_IO3 ((uint32_t)0x00000400) /*!<GROUP3_IO3 sampling mode */
+#define TSC_IOSCR_G3_IO4 ((uint32_t)0x00000800) /*!<GROUP3_IO4 sampling mode */
+#define TSC_IOSCR_G4_IO1 ((uint32_t)0x00001000) /*!<GROUP4_IO1 sampling mode */
+#define TSC_IOSCR_G4_IO2 ((uint32_t)0x00002000) /*!<GROUP4_IO2 sampling mode */
+#define TSC_IOSCR_G4_IO3 ((uint32_t)0x00004000) /*!<GROUP4_IO3 sampling mode */
+#define TSC_IOSCR_G4_IO4 ((uint32_t)0x00008000) /*!<GROUP4_IO4 sampling mode */
+#define TSC_IOSCR_G5_IO1 ((uint32_t)0x00010000) /*!<GROUP5_IO1 sampling mode */
+#define TSC_IOSCR_G5_IO2 ((uint32_t)0x00020000) /*!<GROUP5_IO2 sampling mode */
+#define TSC_IOSCR_G5_IO3 ((uint32_t)0x00040000) /*!<GROUP5_IO3 sampling mode */
+#define TSC_IOSCR_G5_IO4 ((uint32_t)0x00080000) /*!<GROUP5_IO4 sampling mode */
+#define TSC_IOSCR_G6_IO1 ((uint32_t)0x00100000) /*!<GROUP6_IO1 sampling mode */
+#define TSC_IOSCR_G6_IO2 ((uint32_t)0x00200000) /*!<GROUP6_IO2 sampling mode */
+#define TSC_IOSCR_G6_IO3 ((uint32_t)0x00400000) /*!<GROUP6_IO3 sampling mode */
+#define TSC_IOSCR_G6_IO4 ((uint32_t)0x00800000) /*!<GROUP6_IO4 sampling mode */
+#define TSC_IOSCR_G7_IO1 ((uint32_t)0x01000000) /*!<GROUP7_IO1 sampling mode */
+#define TSC_IOSCR_G7_IO2 ((uint32_t)0x02000000) /*!<GROUP7_IO2 sampling mode */
+#define TSC_IOSCR_G7_IO3 ((uint32_t)0x04000000) /*!<GROUP7_IO3 sampling mode */
+#define TSC_IOSCR_G7_IO4 ((uint32_t)0x08000000) /*!<GROUP7_IO4 sampling mode */
+#define TSC_IOSCR_G8_IO1 ((uint32_t)0x10000000) /*!<GROUP8_IO1 sampling mode */
+#define TSC_IOSCR_G8_IO2 ((uint32_t)0x20000000) /*!<GROUP8_IO2 sampling mode */
+#define TSC_IOSCR_G8_IO3 ((uint32_t)0x40000000) /*!<GROUP8_IO3 sampling mode */
+#define TSC_IOSCR_G8_IO4 ((uint32_t)0x80000000) /*!<GROUP8_IO4 sampling mode */
+
+/******************* Bit definition for TSC_IOCCR register ******************/
+#define TSC_IOCCR_G1_IO1 ((uint32_t)0x00000001) /*!<GROUP1_IO1 channel mode */
+#define TSC_IOCCR_G1_IO2 ((uint32_t)0x00000002) /*!<GROUP1_IO2 channel mode */
+#define TSC_IOCCR_G1_IO3 ((uint32_t)0x00000004) /*!<GROUP1_IO3 channel mode */
+#define TSC_IOCCR_G1_IO4 ((uint32_t)0x00000008) /*!<GROUP1_IO4 channel mode */
+#define TSC_IOCCR_G2_IO1 ((uint32_t)0x00000010) /*!<GROUP2_IO1 channel mode */
+#define TSC_IOCCR_G2_IO2 ((uint32_t)0x00000020) /*!<GROUP2_IO2 channel mode */
+#define TSC_IOCCR_G2_IO3 ((uint32_t)0x00000040) /*!<GROUP2_IO3 channel mode */
+#define TSC_IOCCR_G2_IO4 ((uint32_t)0x00000080) /*!<GROUP2_IO4 channel mode */
+#define TSC_IOCCR_G3_IO1 ((uint32_t)0x00000100) /*!<GROUP3_IO1 channel mode */
+#define TSC_IOCCR_G3_IO2 ((uint32_t)0x00000200) /*!<GROUP3_IO2 channel mode */
+#define TSC_IOCCR_G3_IO3 ((uint32_t)0x00000400) /*!<GROUP3_IO3 channel mode */
+#define TSC_IOCCR_G3_IO4 ((uint32_t)0x00000800) /*!<GROUP3_IO4 channel mode */
+#define TSC_IOCCR_G4_IO1 ((uint32_t)0x00001000) /*!<GROUP4_IO1 channel mode */
+#define TSC_IOCCR_G4_IO2 ((uint32_t)0x00002000) /*!<GROUP4_IO2 channel mode */
+#define TSC_IOCCR_G4_IO3 ((uint32_t)0x00004000) /*!<GROUP4_IO3 channel mode */
+#define TSC_IOCCR_G4_IO4 ((uint32_t)0x00008000) /*!<GROUP4_IO4 channel mode */
+#define TSC_IOCCR_G5_IO1 ((uint32_t)0x00010000) /*!<GROUP5_IO1 channel mode */
+#define TSC_IOCCR_G5_IO2 ((uint32_t)0x00020000) /*!<GROUP5_IO2 channel mode */
+#define TSC_IOCCR_G5_IO3 ((uint32_t)0x00040000) /*!<GROUP5_IO3 channel mode */
+#define TSC_IOCCR_G5_IO4 ((uint32_t)0x00080000) /*!<GROUP5_IO4 channel mode */
+#define TSC_IOCCR_G6_IO1 ((uint32_t)0x00100000) /*!<GROUP6_IO1 channel mode */
+#define TSC_IOCCR_G6_IO2 ((uint32_t)0x00200000) /*!<GROUP6_IO2 channel mode */
+#define TSC_IOCCR_G6_IO3 ((uint32_t)0x00400000) /*!<GROUP6_IO3 channel mode */
+#define TSC_IOCCR_G6_IO4 ((uint32_t)0x00800000) /*!<GROUP6_IO4 channel mode */
+#define TSC_IOCCR_G7_IO1 ((uint32_t)0x01000000) /*!<GROUP7_IO1 channel mode */
+#define TSC_IOCCR_G7_IO2 ((uint32_t)0x02000000) /*!<GROUP7_IO2 channel mode */
+#define TSC_IOCCR_G7_IO3 ((uint32_t)0x04000000) /*!<GROUP7_IO3 channel mode */
+#define TSC_IOCCR_G7_IO4 ((uint32_t)0x08000000) /*!<GROUP7_IO4 channel mode */
+#define TSC_IOCCR_G8_IO1 ((uint32_t)0x10000000) /*!<GROUP8_IO1 channel mode */
+#define TSC_IOCCR_G8_IO2 ((uint32_t)0x20000000) /*!<GROUP8_IO2 channel mode */
+#define TSC_IOCCR_G8_IO3 ((uint32_t)0x40000000) /*!<GROUP8_IO3 channel mode */
+#define TSC_IOCCR_G8_IO4 ((uint32_t)0x80000000) /*!<GROUP8_IO4 channel mode */
+
+/******************* Bit definition for TSC_IOGCSR register *****************/
+#define TSC_IOGCSR_G1E ((uint32_t)0x00000001) /*!<Analog IO GROUP1 enable */
+#define TSC_IOGCSR_G2E ((uint32_t)0x00000002) /*!<Analog IO GROUP2 enable */
+#define TSC_IOGCSR_G3E ((uint32_t)0x00000004) /*!<Analog IO GROUP3 enable */
+#define TSC_IOGCSR_G4E ((uint32_t)0x00000008) /*!<Analog IO GROUP4 enable */
+#define TSC_IOGCSR_G5E ((uint32_t)0x00000010) /*!<Analog IO GROUP5 enable */
+#define TSC_IOGCSR_G6E ((uint32_t)0x00000020) /*!<Analog IO GROUP6 enable */
+#define TSC_IOGCSR_G7E ((uint32_t)0x00000040) /*!<Analog IO GROUP7 enable */
+#define TSC_IOGCSR_G8E ((uint32_t)0x00000080) /*!<Analog IO GROUP8 enable */
+#define TSC_IOGCSR_G1S ((uint32_t)0x00010000) /*!<Analog IO GROUP1 status */
+#define TSC_IOGCSR_G2S ((uint32_t)0x00020000) /*!<Analog IO GROUP2 status */
+#define TSC_IOGCSR_G3S ((uint32_t)0x00040000) /*!<Analog IO GROUP3 status */
+#define TSC_IOGCSR_G4S ((uint32_t)0x00080000) /*!<Analog IO GROUP4 status */
+#define TSC_IOGCSR_G5S ((uint32_t)0x00100000) /*!<Analog IO GROUP5 status */
+#define TSC_IOGCSR_G6S ((uint32_t)0x00200000) /*!<Analog IO GROUP6 status */
+#define TSC_IOGCSR_G7S ((uint32_t)0x00400000) /*!<Analog IO GROUP7 status */
+#define TSC_IOGCSR_G8S ((uint32_t)0x00800000) /*!<Analog IO GROUP8 status */
+
+/******************* Bit definition for TSC_IOGXCR register *****************/
+#define TSC_IOGXCR_CNT ((uint32_t)0x00003FFF) /*!<CNT[13:0] bits (Counter value) */
+
+/******************************************************************************/
+/* */
+/* Universal Synchronous Asynchronous Receiver Transmitter (USART) */
+/* */
+/******************************************************************************/
+/****************** Bit definition for USART_CR1 register *******************/
+#define USART_CR1_UE ((uint32_t)0x00000001) /*!< USART Enable */
+#define USART_CR1_UESM ((uint32_t)0x00000002) /*!< USART Enable in STOP Mode */
+#define USART_CR1_RE ((uint32_t)0x00000004) /*!< Receiver Enable */
+#define USART_CR1_TE ((uint32_t)0x00000008) /*!< Transmitter Enable */
+#define USART_CR1_IDLEIE ((uint32_t)0x00000010) /*!< IDLE Interrupt Enable */
+#define USART_CR1_RXNEIE ((uint32_t)0x00000020) /*!< RXNE Interrupt Enable */
+#define USART_CR1_TCIE ((uint32_t)0x00000040) /*!< Transmission Complete Interrupt Enable */
+#define USART_CR1_TXEIE ((uint32_t)0x00000080) /*!< TXE Interrupt Enable */
+#define USART_CR1_PEIE ((uint32_t)0x00000100) /*!< PE Interrupt Enable */
+#define USART_CR1_PS ((uint32_t)0x00000200) /*!< Parity Selection */
+#define USART_CR1_PCE ((uint32_t)0x00000400) /*!< Parity Control Enable */
+#define USART_CR1_WAKE ((uint32_t)0x00000800) /*!< Receiver Wakeup method */
+#define USART_CR1_M0 ((uint32_t)0x00001000) /*!< Word length bit 0 */
+#define USART_CR1_MME ((uint32_t)0x00002000) /*!< Mute Mode Enable */
+#define USART_CR1_CMIE ((uint32_t)0x00004000) /*!< Character match interrupt enable */
+#define USART_CR1_OVER8 ((uint32_t)0x00008000) /*!< Oversampling by 8-bit or 16-bit mode */
+#define USART_CR1_DEDT ((uint32_t)0x001F0000) /*!< DEDT[4:0] bits (Driver Enable Deassertion Time) */
+#define USART_CR1_DEDT_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define USART_CR1_DEDT_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define USART_CR1_DEDT_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define USART_CR1_DEDT_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+#define USART_CR1_DEDT_4 ((uint32_t)0x00100000) /*!< Bit 4 */
+#define USART_CR1_DEAT ((uint32_t)0x03E00000) /*!< DEAT[4:0] bits (Driver Enable Assertion Time) */
+#define USART_CR1_DEAT_0 ((uint32_t)0x00200000) /*!< Bit 0 */
+#define USART_CR1_DEAT_1 ((uint32_t)0x00400000) /*!< Bit 1 */
+#define USART_CR1_DEAT_2 ((uint32_t)0x00800000) /*!< Bit 2 */
+#define USART_CR1_DEAT_3 ((uint32_t)0x01000000) /*!< Bit 3 */
+#define USART_CR1_DEAT_4 ((uint32_t)0x02000000) /*!< Bit 4 */
+#define USART_CR1_RTOIE ((uint32_t)0x04000000) /*!< Receive Time Out interrupt enable */
+#define USART_CR1_EOBIE ((uint32_t)0x08000000) /*!< End of Block interrupt enable */
+#define USART_CR1_M1 ((uint32_t)0x10000000) /*!< Word length bit 1 */
+#define USART_CR1_M ((uint32_t)0x10001000) /*!< [M1:M0] Word length */
+
+/****************** Bit definition for USART_CR2 register *******************/
+#define USART_CR2_ADDM7 ((uint32_t)0x00000010) /*!< 7-bit or 4-bit Address Detection */
+#define USART_CR2_LBDL ((uint32_t)0x00000020) /*!< LIN Break Detection Length */
+#define USART_CR2_LBDIE ((uint32_t)0x00000040) /*!< LIN Break Detection Interrupt Enable */
+#define USART_CR2_LBCL ((uint32_t)0x00000100) /*!< Last Bit Clock pulse */
+#define USART_CR2_CPHA ((uint32_t)0x00000200) /*!< Clock Phase */
+#define USART_CR2_CPOL ((uint32_t)0x00000400) /*!< Clock Polarity */
+#define USART_CR2_CLKEN ((uint32_t)0x00000800) /*!< Clock Enable */
+#define USART_CR2_STOP ((uint32_t)0x00003000) /*!< STOP[1:0] bits (STOP bits) */
+#define USART_CR2_STOP_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define USART_CR2_STOP_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+#define USART_CR2_LINEN ((uint32_t)0x00004000) /*!< LIN mode enable */
+#define USART_CR2_SWAP ((uint32_t)0x00008000) /*!< SWAP TX/RX pins */
+#define USART_CR2_RXINV ((uint32_t)0x00010000) /*!< RX pin active level inversion */
+#define USART_CR2_TXINV ((uint32_t)0x00020000) /*!< TX pin active level inversion */
+#define USART_CR2_DATAINV ((uint32_t)0x00040000) /*!< Binary data inversion */
+#define USART_CR2_MSBFIRST ((uint32_t)0x00080000) /*!< Most Significant Bit First */
+#define USART_CR2_ABREN ((uint32_t)0x00100000) /*!< Auto Baud-Rate Enable*/
+#define USART_CR2_ABRMODE ((uint32_t)0x00600000) /*!< ABRMOD[1:0] bits (Auto Baud-Rate Mode) */
+#define USART_CR2_ABRMODE_0 ((uint32_t)0x00200000) /*!< Bit 0 */
+#define USART_CR2_ABRMODE_1 ((uint32_t)0x00400000) /*!< Bit 1 */
+#define USART_CR2_RTOEN ((uint32_t)0x00800000) /*!< Receiver Time-Out enable */
+#define USART_CR2_ADD ((uint32_t)0xFF000000) /*!< Address of the USART node */
+
+/****************** Bit definition for USART_CR3 register *******************/
+#define USART_CR3_EIE ((uint32_t)0x00000001) /*!< Error Interrupt Enable */
+#define USART_CR3_IREN ((uint32_t)0x00000002) /*!< IrDA mode Enable */
+#define USART_CR3_IRLP ((uint32_t)0x00000004) /*!< IrDA Low-Power */
+#define USART_CR3_HDSEL ((uint32_t)0x00000008) /*!< Half-Duplex Selection */
+#define USART_CR3_NACK ((uint32_t)0x00000010) /*!< SmartCard NACK enable */
+#define USART_CR3_SCEN ((uint32_t)0x00000020) /*!< SmartCard mode enable */
+#define USART_CR3_DMAR ((uint32_t)0x00000040) /*!< DMA Enable Receiver */
+#define USART_CR3_DMAT ((uint32_t)0x00000080) /*!< DMA Enable Transmitter */
+#define USART_CR3_RTSE ((uint32_t)0x00000100) /*!< RTS Enable */
+#define USART_CR3_CTSE ((uint32_t)0x00000200) /*!< CTS Enable */
+#define USART_CR3_CTSIE ((uint32_t)0x00000400) /*!< CTS Interrupt Enable */
+#define USART_CR3_ONEBIT ((uint32_t)0x00000800) /*!< One sample bit method enable */
+#define USART_CR3_OVRDIS ((uint32_t)0x00001000) /*!< Overrun Disable */
+#define USART_CR3_DDRE ((uint32_t)0x00002000) /*!< DMA Disable on Reception Error */
+#define USART_CR3_DEM ((uint32_t)0x00004000) /*!< Driver Enable Mode */
+#define USART_CR3_DEP ((uint32_t)0x00008000) /*!< Driver Enable Polarity Selection */
+#define USART_CR3_SCARCNT ((uint32_t)0x000E0000) /*!< SCARCNT[2:0] bits (SmartCard Auto-Retry Count) */
+#define USART_CR3_SCARCNT_0 ((uint32_t)0x00020000) /*!< Bit 0 */
+#define USART_CR3_SCARCNT_1 ((uint32_t)0x00040000) /*!< Bit 1 */
+#define USART_CR3_SCARCNT_2 ((uint32_t)0x00080000) /*!< Bit 2 */
+#define USART_CR3_WUS ((uint32_t)0x00300000) /*!< WUS[1:0] bits (Wake UP Interrupt Flag Selection) */
+#define USART_CR3_WUS_0 ((uint32_t)0x00100000) /*!< Bit 0 */
+#define USART_CR3_WUS_1 ((uint32_t)0x00200000) /*!< Bit 1 */
+#define USART_CR3_WUFIE ((uint32_t)0x00400000) /*!< Wake Up Interrupt Enable */
+
+/****************** Bit definition for USART_BRR register *******************/
+#define USART_BRR_DIV_FRACTION ((uint32_t)0x0000000F) /*!< Fraction of USARTDIV */
+#define USART_BRR_DIV_MANTISSA ((uint32_t)0x0000FFF0) /*!< Mantissa of USARTDIV */
+
+/****************** Bit definition for USART_GTPR register ******************/
+#define USART_GTPR_PSC ((uint32_t)0x000000FF) /*!< PSC[7:0] bits (Prescaler value) */
+#define USART_GTPR_GT ((uint32_t)0x0000FF00) /*!< GT[7:0] bits (Guard time value) */
+
+
+/******************* Bit definition for USART_RTOR register *****************/
+#define USART_RTOR_RTO ((uint32_t)0x00FFFFFF) /*!< Receiver Time Out Value */
+#define USART_RTOR_BLEN ((uint32_t)0xFF000000) /*!< Block Length */
+
+/******************* Bit definition for USART_RQR register ******************/
+#define USART_RQR_ABRRQ ((uint32_t)0x00000001) /*!< Auto-Baud Rate Request */
+#define USART_RQR_SBKRQ ((uint32_t)0x00000002) /*!< Send Break Request */
+#define USART_RQR_MMRQ ((uint32_t)0x00000004) /*!< Mute Mode Request */
+#define USART_RQR_RXFRQ ((uint32_t)0x00000008) /*!< Receive Data flush Request */
+#define USART_RQR_TXFRQ ((uint32_t)0x00000010) /*!< Transmit data flush Request */
+
+/******************* Bit definition for USART_ISR register ******************/
+#define USART_ISR_PE ((uint32_t)0x00000001) /*!< Parity Error */
+#define USART_ISR_FE ((uint32_t)0x00000002) /*!< Framing Error */
+#define USART_ISR_NE ((uint32_t)0x00000004) /*!< Noise detected Flag */
+#define USART_ISR_ORE ((uint32_t)0x00000008) /*!< OverRun Error */
+#define USART_ISR_IDLE ((uint32_t)0x00000010) /*!< IDLE line detected */
+#define USART_ISR_RXNE ((uint32_t)0x00000020) /*!< Read Data Register Not Empty */
+#define USART_ISR_TC ((uint32_t)0x00000040) /*!< Transmission Complete */
+#define USART_ISR_TXE ((uint32_t)0x00000080) /*!< Transmit Data Register Empty */
+#define USART_ISR_LBDF ((uint32_t)0x00000100) /*!< LIN Break Detection Flag */
+#define USART_ISR_CTSIF ((uint32_t)0x00000200) /*!< CTS interrupt flag */
+#define USART_ISR_CTS ((uint32_t)0x00000400) /*!< CTS flag */
+#define USART_ISR_RTOF ((uint32_t)0x00000800) /*!< Receiver Time Out */
+#define USART_ISR_EOBF ((uint32_t)0x00001000) /*!< End Of Block Flag */
+#define USART_ISR_ABRE ((uint32_t)0x00004000) /*!< Auto-Baud Rate Error */
+#define USART_ISR_ABRF ((uint32_t)0x00008000) /*!< Auto-Baud Rate Flag */
+#define USART_ISR_BUSY ((uint32_t)0x00010000) /*!< Busy Flag */
+#define USART_ISR_CMF ((uint32_t)0x00020000) /*!< Character Match Flag */
+#define USART_ISR_SBKF ((uint32_t)0x00040000) /*!< Send Break Flag */
+#define USART_ISR_RWU ((uint32_t)0x00080000) /*!< Receive Wake Up from mute mode Flag */
+#define USART_ISR_WUF ((uint32_t)0x00100000) /*!< Wake Up from stop mode Flag */
+#define USART_ISR_TEACK ((uint32_t)0x00200000) /*!< Transmit Enable Acknowledge Flag */
+#define USART_ISR_REACK ((uint32_t)0x00400000) /*!< Receive Enable Acknowledge Flag */
+
+/******************* Bit definition for USART_ICR register ******************/
+#define USART_ICR_PECF ((uint32_t)0x00000001) /*!< Parity Error Clear Flag */
+#define USART_ICR_FECF ((uint32_t)0x00000002) /*!< Framing Error Clear Flag */
+#define USART_ICR_NCF ((uint32_t)0x00000004) /*!< Noise detected Clear Flag */
+#define USART_ICR_ORECF ((uint32_t)0x00000008) /*!< OverRun Error Clear Flag */
+#define USART_ICR_IDLECF ((uint32_t)0x00000010) /*!< IDLE line detected Clear Flag */
+#define USART_ICR_TCCF ((uint32_t)0x00000040) /*!< Transmission Complete Clear Flag */
+#define USART_ICR_LBDCF ((uint32_t)0x00000100) /*!< LIN Break Detection Clear Flag */
+#define USART_ICR_CTSCF ((uint32_t)0x00000200) /*!< CTS Interrupt Clear Flag */
+#define USART_ICR_RTOCF ((uint32_t)0x00000800) /*!< Receiver Time Out Clear Flag */
+#define USART_ICR_EOBCF ((uint32_t)0x00001000) /*!< End Of Block Clear Flag */
+#define USART_ICR_CMCF ((uint32_t)0x00020000) /*!< Character Match Clear Flag */
+#define USART_ICR_WUCF ((uint32_t)0x00100000) /*!< Wake Up from stop mode Clear Flag */
+
+/******************* Bit definition for USART_RDR register ******************/
+#define USART_RDR_RDR ((uint16_t)0x01FF) /*!< RDR[8:0] bits (Receive Data value) */
+
+/******************* Bit definition for USART_TDR register ******************/
+#define USART_TDR_TDR ((uint16_t)0x01FF) /*!< TDR[8:0] bits (Transmit Data value) */
+
+/******************************************************************************/
+/* */
+/* USB Device General registers */
+/* */
+/******************************************************************************/
+#define USB_CNTR (USB_BASE + 0x40) /*!< Control register */
+#define USB_ISTR (USB_BASE + 0x44) /*!< Interrupt status register */
+#define USB_FNR (USB_BASE + 0x48) /*!< Frame number register */
+#define USB_DADDR (USB_BASE + 0x4C) /*!< Device address register */
+#define USB_BTABLE (USB_BASE + 0x50) /*!< Buffer Table address register */
+#define USB_LPMCSR (USB_BASE + 0x54) /*!< LPM Control and Status register */
+#define USB_BCDR (USB_BASE + 0x58) /*!< Battery Charging detector register*/
+
+/**************************** ISTR interrupt events *************************/
+#define USB_ISTR_CTR ((uint16_t)0x8000) /*!< Correct TRansfer (clear-only bit) */
+#define USB_ISTR_PMAOVR ((uint16_t)0x4000) /*!< DMA OVeR/underrun (clear-only bit) */
+#define USB_ISTR_ERR ((uint16_t)0x2000) /*!< ERRor (clear-only bit) */
+#define USB_ISTR_WKUP ((uint16_t)0x1000) /*!< WaKe UP (clear-only bit) */
+#define USB_ISTR_SUSP ((uint16_t)0x0800) /*!< SUSPend (clear-only bit) */
+#define USB_ISTR_RESET ((uint16_t)0x0400) /*!< RESET (clear-only bit) */
+#define USB_ISTR_SOF ((uint16_t)0x0200) /*!< Start Of Frame (clear-only bit) */
+#define USB_ISTR_ESOF ((uint16_t)0x0100) /*!< Expected Start Of Frame (clear-only bit) */
+#define USB_ISTR_L1REQ ((uint16_t)0x0080) /*!< LPM L1 state request */
+#define USB_ISTR_DIR ((uint16_t)0x0010) /*!< DIRection of transaction (read-only bit) */
+#define USB_ISTR_EP_ID ((uint16_t)0x000F) /*!< EndPoint IDentifier (read-only bit) */
+
+#define USB_CLR_CTR (~USB_ISTR_CTR) /*!< clear Correct TRansfer bit */
+#define USB_CLR_PMAOVR (~USB_ISTR_PMAOVR) /*!< clear DMA OVeR/underrun bit*/
+#define USB_CLR_ERR (~USB_ISTR_ERR) /*!< clear ERRor bit */
+#define USB_CLR_WKUP (~USB_ISTR_WKUP) /*!< clear WaKe UP bit */
+#define USB_CLR_SUSP (~USB_ISTR_SUSP) /*!< clear SUSPend bit */
+#define USB_CLR_RESET (~USB_ISTR_RESET) /*!< clear RESET bit */
+#define USB_CLR_SOF (~USB_ISTR_SOF) /*!< clear Start Of Frame bit */
+#define USB_CLR_ESOF (~USB_ISTR_ESOF) /*!< clear Expected Start Of Frame bit */
+#define USB_CLR_L1REQ (~USB_ISTR_L1REQ) /*!< clear LPM L1 bit */
+
+/************************* CNTR control register bits definitions ***********/
+#define USB_CNTR_CTRM ((uint16_t)0x8000) /*!< Correct TRansfer Mask */
+#define USB_CNTR_PMAOVRM ((uint16_t)0x4000) /*!< DMA OVeR/underrun Mask */
+#define USB_CNTR_ERRM ((uint16_t)0x2000) /*!< ERRor Mask */
+#define USB_CNTR_WKUPM ((uint16_t)0x1000) /*!< WaKe UP Mask */
+#define USB_CNTR_SUSPM ((uint16_t)0x0800) /*!< SUSPend Mask */
+#define USB_CNTR_RESETM ((uint16_t)0x0400) /*!< RESET Mask */
+#define USB_CNTR_SOFM ((uint16_t)0x0200) /*!< Start Of Frame Mask */
+#define USB_CNTR_ESOFM ((uint16_t)0x0100) /*!< Expected Start Of Frame Mask */
+#define USB_CNTR_L1REQM ((uint16_t)0x0080) /*!< LPM L1 state request interrupt mask */
+#define USB_CNTR_L1RESUME ((uint16_t)0x0020) /*!< LPM L1 Resume request */
+#define USB_CNTR_RESUME ((uint16_t)0x0010) /*!< RESUME request */
+#define USB_CNTR_FSUSP ((uint16_t)0x0008) /*!< Force SUSPend */
+#define USB_CNTR_LPMODE ((uint16_t)0x0004) /*!< Low-power MODE */
+#define USB_CNTR_PDWN ((uint16_t)0x0002) /*!< Power DoWN */
+#define USB_CNTR_FRES ((uint16_t)0x0001) /*!< Force USB RESet */
+
+/************************* BCDR control register bits definitions ***********/
+#define USB_BCDR_DPPU ((uint16_t)0x8000) /*!< DP Pull-up Enable */
+#define USB_BCDR_PS2DET ((uint16_t)0x0080) /*!< PS2 port or proprietary charger detected */
+#define USB_BCDR_SDET ((uint16_t)0x0040) /*!< Secondary detection (SD) status */
+#define USB_BCDR_PDET ((uint16_t)0x0020) /*!< Primary detection (PD) status */
+#define USB_BCDR_DCDET ((uint16_t)0x0010) /*!< Data contact detection (DCD) status */
+#define USB_BCDR_SDEN ((uint16_t)0x0008) /*!< Secondary detection (SD) mode enable */
+#define USB_BCDR_PDEN ((uint16_t)0x0004) /*!< Primary detection (PD) mode enable */
+#define USB_BCDR_DCDEN ((uint16_t)0x0002) /*!< Data contact detection (DCD) mode enable */
+#define USB_BCDR_BCDEN ((uint16_t)0x0001) /*!< Battery charging detector (BCD) enable */
+
+/*************************** LPM register bits definitions ******************/
+#define USB_LPMCSR_BESL ((uint16_t)0x00F0) /*!< BESL value received with last ACKed LPM Token */
+#define USB_LPMCSR_REMWAKE ((uint16_t)0x0008) /*!< bRemoteWake value received with last ACKed LPM Token */
+#define USB_LPMCSR_LPMACK ((uint16_t)0x0002) /*!< LPM Token acknowledge enable*/
+#define USB_LPMCSR_LMPEN ((uint16_t)0x0001) /*!< LPM support enable */
+
+/******************** FNR Frame Number Register bit definitions ************/
+#define USB_FNR_RXDP ((uint16_t)0x8000) /*!< status of D+ data line */
+#define USB_FNR_RXDM ((uint16_t)0x4000) /*!< status of D- data line */
+#define USB_FNR_LCK ((uint16_t)0x2000) /*!< LoCKed */
+#define USB_FNR_LSOF ((uint16_t)0x1800) /*!< Lost SOF */
+#define USB_FNR_FN ((uint16_t)0x07FF) /*!< Frame Number */
+
+/******************** DADDR Device ADDRess bit definitions ****************/
+#define USB_DADDR_EF ((uint8_t)0x80) /*!< USB device address Enable Function */
+#define USB_DADDR_ADD ((uint8_t)0x7F) /*!< USB device address */
+
+/****************************** Endpoint register *************************/
+#define USB_EP0R USB_BASE /*!< endpoint 0 register address */
+#define USB_EP1R (USB_BASE + 0x04) /*!< endpoint 1 register address */
+#define USB_EP2R (USB_BASE + 0x08) /*!< endpoint 2 register address */
+#define USB_EP3R (USB_BASE + 0x0C) /*!< endpoint 3 register address */
+#define USB_EP4R (USB_BASE + 0x10) /*!< endpoint 4 register address */
+#define USB_EP5R (USB_BASE + 0x14) /*!< endpoint 5 register address */
+#define USB_EP6R (USB_BASE + 0x18) /*!< endpoint 6 register address */
+#define USB_EP7R (USB_BASE + 0x1C) /*!< endpoint 7 register address */
+/* bit positions */
+#define USB_EP_CTR_RX ((uint16_t)0x8000) /*!< EndPoint Correct TRansfer RX */
+#define USB_EP_DTOG_RX ((uint16_t)0x4000) /*!< EndPoint Data TOGGLE RX */
+#define USB_EPRX_STAT ((uint16_t)0x3000) /*!< EndPoint RX STATus bit field */
+#define USB_EP_SETUP ((uint16_t)0x0800) /*!< EndPoint SETUP */
+#define USB_EP_T_FIELD ((uint16_t)0x0600) /*!< EndPoint TYPE */
+#define USB_EP_KIND ((uint16_t)0x0100) /*!< EndPoint KIND */
+#define USB_EP_CTR_TX ((uint16_t)0x0080) /*!< EndPoint Correct TRansfer TX */
+#define USB_EP_DTOG_TX ((uint16_t)0x0040) /*!< EndPoint Data TOGGLE TX */
+#define USB_EPTX_STAT ((uint16_t)0x0030) /*!< EndPoint TX STATus bit field */
+#define USB_EPADDR_FIELD ((uint16_t)0x000F) /*!< EndPoint ADDRess FIELD */
+
+/* EndPoint REGister MASK (no toggle fields) */
+#define USB_EPREG_MASK (USB_EP_CTR_RX|USB_EP_SETUP|USB_EP_T_FIELD|USB_EP_KIND|USB_EP_CTR_TX|USB_EPADDR_FIELD)
+ /*!< EP_TYPE[1:0] EndPoint TYPE */
+#define USB_EP_TYPE_MASK ((uint16_t)0x0600) /*!< EndPoint TYPE Mask */
+#define USB_EP_BULK ((uint16_t)0x0000) /*!< EndPoint BULK */
+#define USB_EP_CONTROL ((uint16_t)0x0200) /*!< EndPoint CONTROL */
+#define USB_EP_ISOCHRONOUS ((uint16_t)0x0400) /*!< EndPoint ISOCHRONOUS */
+#define USB_EP_INTERRUPT ((uint16_t)0x0600) /*!< EndPoint INTERRUPT */
+#define USB_EP_T_MASK (~USB_EP_T_FIELD & USB_EPREG_MASK)
+
+#define USB_EPKIND_MASK (~USB_EP_KIND & USB_EPREG_MASK) /*!< EP_KIND EndPoint KIND */
+ /*!< STAT_TX[1:0] STATus for TX transfer */
+#define USB_EP_TX_DIS ((uint16_t)0x0000) /*!< EndPoint TX DISabled */
+#define USB_EP_TX_STALL ((uint16_t)0x0010) /*!< EndPoint TX STALLed */
+#define USB_EP_TX_NAK ((uint16_t)0x0020) /*!< EndPoint TX NAKed */
+#define USB_EP_TX_VALID ((uint16_t)0x0030) /*!< EndPoint TX VALID */
+#define USB_EPTX_DTOG1 ((uint16_t)0x0010) /*!< EndPoint TX Data TOGgle bit1 */
+#define USB_EPTX_DTOG2 ((uint16_t)0x0020) /*!< EndPoint TX Data TOGgle bit2 */
+#define USB_EPTX_DTOGMASK (USB_EPTX_STAT|USB_EPREG_MASK)
+ /*!< STAT_RX[1:0] STATus for RX transfer */
+#define USB_EP_RX_DIS ((uint16_t)0x0000) /*!< EndPoint RX DISabled */
+#define USB_EP_RX_STALL ((uint16_t)0x1000) /*!< EndPoint RX STALLed */
+#define USB_EP_RX_NAK ((uint16_t)0x2000) /*!< EndPoint RX NAKed */
+#define USB_EP_RX_VALID ((uint16_t)0x3000) /*!< EndPoint RX VALID */
+#define USB_EPRX_DTOG1 ((uint16_t)0x1000) /*!< EndPoint RX Data TOGgle bit1 */
+#define USB_EPRX_DTOG2 ((uint16_t)0x2000) /*!< EndPoint RX Data TOGgle bit1 */
+#define USB_EPRX_DTOGMASK (USB_EPRX_STAT|USB_EPREG_MASK)
+
+/******************************************************************************/
+/* */
+/* Window WATCHDOG (WWDG) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for WWDG_CR register ********************/
+#define WWDG_CR_T ((uint32_t)0x7F) /*!<T[6:0] bits (7-Bit counter (MSB to LSB)) */
+#define WWDG_CR_T0 ((uint32_t)0x01) /*!<Bit 0 */
+#define WWDG_CR_T1 ((uint32_t)0x02) /*!<Bit 1 */
+#define WWDG_CR_T2 ((uint32_t)0x04) /*!<Bit 2 */
+#define WWDG_CR_T3 ((uint32_t)0x08) /*!<Bit 3 */
+#define WWDG_CR_T4 ((uint32_t)0x10) /*!<Bit 4 */
+#define WWDG_CR_T5 ((uint32_t)0x20) /*!<Bit 5 */
+#define WWDG_CR_T6 ((uint32_t)0x40) /*!<Bit 6 */
+
+#define WWDG_CR_WDGA ((uint32_t)0x80) /*!<Activation bit */
+
+/******************* Bit definition for WWDG_CFR register *******************/
+#define WWDG_CFR_W ((uint32_t)0x007F) /*!<W[6:0] bits (7-bit window value) */
+#define WWDG_CFR_W0 ((uint32_t)0x0001) /*!<Bit 0 */
+#define WWDG_CFR_W1 ((uint32_t)0x0002) /*!<Bit 1 */
+#define WWDG_CFR_W2 ((uint32_t)0x0004) /*!<Bit 2 */
+#define WWDG_CFR_W3 ((uint32_t)0x0008) /*!<Bit 3 */
+#define WWDG_CFR_W4 ((uint32_t)0x0010) /*!<Bit 4 */
+#define WWDG_CFR_W5 ((uint32_t)0x0020) /*!<Bit 5 */
+#define WWDG_CFR_W6 ((uint32_t)0x0040) /*!<Bit 6 */
+
+#define WWDG_CFR_WDGTB ((uint32_t)0x0180) /*!<WDGTB[1:0] bits (Timer Base) */
+#define WWDG_CFR_WDGTB0 ((uint32_t)0x0080) /*!<Bit 0 */
+#define WWDG_CFR_WDGTB1 ((uint32_t)0x0100) /*!<Bit 1 */
+
+#define WWDG_CFR_EWI ((uint32_t)0x0200) /*!<Early Wakeup Interrupt */
+
+/******************* Bit definition for WWDG_SR register ********************/
+#define WWDG_SR_EWIF ((uint32_t)0x01) /*!<Early Wakeup Interrupt Flag */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+
+/** @addtogroup Exported_macro
+ * @{
+ */
+
+/****************************** ADC Instances *********************************/
+#define IS_ADC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == ADC1)
+
+#define IS_ADC_COMMON_INSTANCE(INSTANCE) ((INSTANCE) == ADC)
+
+/******************************* CAN Instances ********************************/
+#define IS_CAN_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CAN)
+
+/****************************** CEC Instances *********************************/
+#define IS_CEC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CEC)
+
+/****************************** CRC Instances *********************************/
+#define IS_CRC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CRC)
+
+
+/******************************* DMA Instances ******************************/
+#define IS_DMA_ALL_INSTANCE(INSTANCE) (((INSTANCE) == DMA1_Channel1) || \
+ ((INSTANCE) == DMA1_Channel2) || \
+ ((INSTANCE) == DMA1_Channel3) || \
+ ((INSTANCE) == DMA1_Channel4) || \
+ ((INSTANCE) == DMA1_Channel5))
+
+/****************************** GPIO Instances ********************************/
+#define IS_GPIO_ALL_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB) || \
+ ((INSTANCE) == GPIOC) || \
+ ((INSTANCE) == GPIOF))
+
+#define IS_GPIO_AF_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB) || \
+ ((INSTANCE) == GPIOF))
+
+#define IS_GPIO_LOCK_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB))
+
+/****************************** I2C Instances *********************************/
+#define IS_I2C_ALL_INSTANCE(INSTANCE) ((INSTANCE) == I2C1)
+
+/****************************** I2S Instances *********************************/
+#define IS_I2S_ALL_INSTANCE(INSTANCE) ((INSTANCE) == SPI1)
+
+/****************************** IWDG Instances ********************************/
+#define IS_IWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == IWDG)
+
+/****************************** RTC Instances *********************************/
+#define IS_RTC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == RTC)
+
+/****************************** SMBUS Instances *********************************/
+#define IS_SMBUS_ALL_INSTANCE(INSTANCE) ((INSTANCE) == I2C1)
+
+/****************************** SPI Instances *********************************/
+#define IS_SPI_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
+ ((INSTANCE) == SPI2))
+
+/****************************** TIM Instances *********************************/
+#define IS_TIM_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CC1_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CC2_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CC3_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CC4_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CC5_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1))
+
+#define IS_TIM_CC6_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1))
+
+#define IS_TIM_CLOCK_SELECT_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_TIX_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_ENCODER_INTERFACE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_HALL_INTERFACE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1))
+
+#define IS_TIM_XOR_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_MASTER_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_SLAVE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_32B_COUNTER_INSTANCE(INSTANCE)\
+ ((INSTANCE) == TIM2)
+
+#define IS_TIM_DMABURST_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_BREAK_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CCX_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM2) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM3) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM16) && \
+ (((CHANNEL) == TIM_CHANNEL_1))) \
+ || \
+ (((INSTANCE) == TIM17) && \
+ (((CHANNEL) == TIM_CHANNEL_1))))
+
+#define IS_TIM_CCXN_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3))) \
+ || \
+ (((INSTANCE) == TIM16) && \
+ ((CHANNEL) == TIM_CHANNEL_1)) \
+ || \
+ (((INSTANCE) == TIM17) && \
+ ((CHANNEL) == TIM_CHANNEL_1)))
+
+#define IS_TIM_COUNTER_MODE_SELECT_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_REPETITION_COUNTER_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CLOCK_DIVISION_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_BKIN2_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1))
+
+#define IS_TIM_TRGO2_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1))
+
+#define IS_TIM_DMA_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_DMA_CC_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_COMMUTATION_EVENT_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_REMAP_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM14))
+
+/****************************** TSC Instances *********************************/
+#define IS_TSC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == TSC)
+
+/*********************** UART Instances : IRDA mode ***************************/
+#define IS_IRDA_INSTANCE(INSTANCE) ((INSTANCE) == USART1)
+
+/********************* UART Instances : Smard card mode ***********************/
+#define IS_SMARTCARD_INSTANCE(INSTANCE) ((INSTANCE) == USART1)
+
+/******************** USART Instances : Synchronous mode **********************/
+#define IS_USART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/******************** USART Instances : auto Baud rate detection **************/
+#define IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(INSTANCE) ((INSTANCE) == USART1)
+
+/******************** UART Instances : Asynchronous mode **********************/
+#define IS_UART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/******************** UART Instances : Half-Duplex mode **********************/
+#define IS_UART_HALFDUPLEX_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/****************** UART Instances : Hardware Flow control ********************/
+#define IS_UART_HWFLOW_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/****************** UART Instances : LIN mode ********************/
+#define IS_UART_LIN_INSTANCE(INSTANCE) ((INSTANCE) == USART1)
+
+/****************** UART Instances : wakeup from stop mode ********************/
+#define IS_UART_WAKEUP_INSTANCE(INSTANCE) ((INSTANCE) == USART1)
+
+/****************** UART Instances : Auto Baud Rate detection ********************/
+#define IS_UART_AUTOBAUDRATE_DETECTION_INSTANCE(INSTANCE) ((INSTANCE) == USART1)
+
+/****************** UART Instances : Driver enable detection ********************/
+#define IS_UART_DRIVER_ENABLE_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/****************************** USB Instances ********************************/
+#define IS_USB_ALL_INSTANCE(INSTANCE) ((INSTANCE) == USB)
+
+/****************************** WWDG Instances ********************************/
+#define IS_WWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == WWDG)
+
+/**
+ * @}
+ */
+
+
+/******************************************************************************/
+/* For a painless codes migration between the STM32F0xx device product */
+/* lines, the aliases defined below are put in place to overcome the */
+/* differences in the interrupt handlers and IRQn definitions. */
+/* No need to update developed interrupt code when moving across */
+/* product lines within the same STM32F0 Family */
+/******************************************************************************/
+
+/* Aliases for __IRQn */
+#define PVD_IRQn PVD_VDDIO2_IRQn
+#define VDDIO2_IRQn PVD_VDDIO2_IRQn
+#define RCC_IRQn RCC_CRS_IRQn
+#define DMA1_Channel4_5_6_7_IRQn DMA1_Channel4_5_IRQn
+#define ADC1_COMP_IRQn ADC1_IRQn
+
+/* Aliases for __IRQHandler */
+#define PVD_IRQHandler PVD_VDDIO2_IRQHandler
+#define VDDIO2_IRQHandler PVD_VDDIO2_IRQHandler
+#define RCC_IRQHandler RCC_CRS_IRQHandler
+#define DMA1_Channel4_5_6_7_IRQHandler DMA1_Channel4_5_IRQHandler
+#define ADC1_COMP_IRQHandler ADC1_IRQHandler
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F042x6_H */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/include/devices/stm32f048xx.h b/f0/include/devices/stm32f048xx.h
new file mode 100755
index 0000000000000000000000000000000000000000..c7bcc6f173a9a0f12037a804c8b96d8abbc65e94
--- /dev/null
+++ b/f0/include/devices/stm32f048xx.h
@@ -0,0 +1,5254 @@
+/**
+ ******************************************************************************
+ * @file stm32f048xx.h
+ * @author MCD Application Team
+ * @version V2.2.1
+ * @date 09-January-2015
+ * @brief CMSIS STM32F048xx devices Peripheral Access Layer Header File.
+ *
+ * This file contains:
+ * - Data structures and the address mapping for all peripherals
+ * - Peripheral's registers declarations and bits definition
+ * - Macros to access peripheral’s registers hardware
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS_Device
+ * @{
+ */
+
+/** @addtogroup stm32f048xx
+ * @{
+ */
+
+#ifndef __STM32F048xx_H
+#define __STM32F048xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+
+/**
+ * @brief Configuration of the Cortex-M0 Processor and Core Peripherals
+ */
+#define __CM0_REV 0 /*!< Core Revision r0p0 */
+#define __MPU_PRESENT 0 /*!< STM32F0xx do not provide MPU */
+#define __NVIC_PRIO_BITS 2 /*!< STM32F0xx uses 2 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F048xx device Interrupt Number Definition
+ */
+typedef enum
+{
+/****** Cortex-M0 Processor Exceptions Numbers **************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */
+ SVC_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */
+
+/****** STM32F048xx specific Interrupt Numbers **************************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ VDDIO2_IRQn = 1, /*!< VDDIO2 Interrupt through EXTI Line 31 */
+ RTC_IRQn = 2, /*!< RTC Interrupt through EXTI Lines 17, 19 and 20 */
+ FLASH_IRQn = 3, /*!< FLASH global Interrupt */
+ RCC_CRS_IRQn = 4, /*!< RCC & CRS Global Interrupts */
+ EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupts */
+ EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupts */
+ EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupts */
+ TSC_IRQn = 8, /*!< Touch Sensing Controller Interrupts */
+ DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */
+ DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupts */
+ DMA1_Channel4_5_IRQn = 11, /*!< DMA1 Channel 4 and Channel 5 Interrupts */
+ ADC1_IRQn = 12, /*!< ADC1 Interrupt */
+ TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupts */
+ TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 15, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 16, /*!< TIM3 global Interrupt */
+ TIM14_IRQn = 19, /*!< TIM14 global Interrupt */
+ TIM16_IRQn = 21, /*!< TIM16 global Interrupt */
+ TIM17_IRQn = 22, /*!< TIM17 global Interrupt */
+ I2C1_IRQn = 23, /*!< I2C1 Event Interrupt & EXTI Line23 Interrupt (I2C1 wakeup) */
+ SPI1_IRQn = 25, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 26, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 27, /*!< USART1 global Interrupt & EXTI Line25 Interrupt (USART1 wakeup) */
+ USART2_IRQn = 28, /*!< USART2 global Interrupt */
+ CEC_CAN_IRQn = 30, /*!< CEC and CAN global Interrupts & EXTI Line27 Interrupt */
+ USB_IRQn = 31 /*!< USB global Interrupts & EXTI Line18 Interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm0.h" /* Cortex-M0 processor and core peripherals */
+#include "system_stm32f0xx.h" /* STM32F0xx System Header */
+#include <stdint.h>
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< ADC Interrupt and Status register, Address offset:0x00 */
+ __IO uint32_t IER; /*!< ADC Interrupt Enable register, Address offset:0x04 */
+ __IO uint32_t CR; /*!< ADC Control register, Address offset:0x08 */
+ __IO uint32_t CFGR1; /*!< ADC Configuration register 1, Address offset:0x0C */
+ __IO uint32_t CFGR2; /*!< ADC Configuration register 2, Address offset:0x10 */
+ __IO uint32_t SMPR; /*!< ADC Sampling time register, Address offset:0x14 */
+ uint32_t RESERVED1; /*!< Reserved, 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, 0x1C */
+ __IO uint32_t TR; /*!< ADC watchdog threshold register, Address offset:0x20 */
+ uint32_t RESERVED3; /*!< Reserved, 0x24 */
+ __IO uint32_t CHSELR; /*!< ADC channel selection register, Address offset:0x28 */
+ uint32_t RESERVED4[5]; /*!< Reserved, 0x2C */
+ __IO uint32_t DR; /*!< ADC data register, Address offset:0x40 */
+}ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CCR;
+}ADC_Common_TypeDef;
+
+/**
+ * @brief Controller Area Network TxMailBox
+ */
+typedef struct
+{
+ __IO uint32_t TIR; /*!< CAN TX mailbox identifier register */
+ __IO uint32_t TDTR; /*!< CAN mailbox data length control and time stamp register */
+ __IO uint32_t TDLR; /*!< CAN mailbox data low register */
+ __IO uint32_t TDHR; /*!< CAN mailbox data high register */
+}CAN_TxMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FIFOMailBox
+ */
+typedef struct
+{
+ __IO uint32_t RIR; /*!< CAN receive FIFO mailbox identifier register */
+ __IO uint32_t RDTR; /*!< CAN receive FIFO mailbox data length control and time stamp register */
+ __IO uint32_t RDLR; /*!< CAN receive FIFO mailbox data low register */
+ __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */
+}CAN_FIFOMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FilterRegister
+ */
+typedef struct
+{
+ __IO uint32_t FR1; /*!< CAN Filter bank register 1 */
+ __IO uint32_t FR2; /*!< CAN Filter bank register 1 */
+}CAN_FilterRegister_TypeDef;
+
+/**
+ * @brief Controller Area Network
+ */
+typedef struct
+{
+ __IO uint32_t MCR; /*!< CAN master control register, Address offset: 0x00 */
+ __IO uint32_t MSR; /*!< CAN master status register, Address offset: 0x04 */
+ __IO uint32_t TSR; /*!< CAN transmit status register, Address offset: 0x08 */
+ __IO uint32_t RF0R; /*!< CAN receive FIFO 0 register, Address offset: 0x0C */
+ __IO uint32_t RF1R; /*!< CAN receive FIFO 1 register, Address offset: 0x10 */
+ __IO uint32_t IER; /*!< CAN interrupt enable register, Address offset: 0x14 */
+ __IO uint32_t ESR; /*!< CAN error status register, Address offset: 0x18 */
+ __IO uint32_t BTR; /*!< CAN bit timing register, Address offset: 0x1C */
+ uint32_t RESERVED0[88]; /*!< Reserved, 0x020 - 0x17F */
+ CAN_TxMailBox_TypeDef sTxMailBox[3]; /*!< CAN Tx MailBox, Address offset: 0x180 - 0x1AC */
+ CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; /*!< CAN FIFO MailBox, Address offset: 0x1B0 - 0x1CC */
+ uint32_t RESERVED1[12]; /*!< Reserved, 0x1D0 - 0x1FF */
+ __IO uint32_t FMR; /*!< CAN filter master register, Address offset: 0x200 */
+ __IO uint32_t FM1R; /*!< CAN filter mode register, Address offset: 0x204 */
+ uint32_t RESERVED2; /*!< Reserved, 0x208 */
+ __IO uint32_t FS1R; /*!< CAN filter scale register, Address offset: 0x20C */
+ uint32_t RESERVED3; /*!< Reserved, 0x210 */
+ __IO uint32_t FFA1R; /*!< CAN filter FIFO assignment register, Address offset: 0x214 */
+ uint32_t RESERVED4; /*!< Reserved, 0x218 */
+ __IO uint32_t FA1R; /*!< CAN filter activation register, Address offset: 0x21C */
+ uint32_t RESERVED5[8]; /*!< Reserved, 0x220-0x23F */
+ CAN_FilterRegister_TypeDef sFilterRegister[28]; /*!< CAN Filter Register, Address offset: 0x240-0x31C */
+}CAN_TypeDef;
+
+/**
+ * @brief HDMI-CEC
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< CEC control register, Address offset:0x00 */
+ __IO uint32_t CFGR; /*!< CEC configuration register, Address offset:0x04 */
+ __IO uint32_t TXDR; /*!< CEC Tx data register , Address offset:0x08 */
+ __IO uint32_t RXDR; /*!< CEC Rx Data Register, Address offset:0x0C */
+ __IO uint32_t ISR; /*!< CEC Interrupt and Status Register, Address offset:0x10 */
+ __IO uint32_t IER; /*!< CEC interrupt enable register, Address offset:0x14 */
+}CEC_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+ uint32_t RESERVED2; /*!< Reserved, 0x0C */
+ __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */
+ __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */
+}CRC_TypeDef;
+
+/**
+ * @brief Clock Recovery System
+ */
+typedef struct
+{
+__IO uint32_t CR; /*!< CRS ccontrol register, Address offset: 0x00 */
+__IO uint32_t CFGR; /*!< CRS configuration register, Address offset: 0x04 */
+__IO uint32_t ISR; /*!< CRS interrupt and status register, Address offset: 0x08 */
+__IO uint32_t ICR; /*!< CRS interrupt flag clear register, Address offset: 0x0C */
+}CRS_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< DMA channel x configuration register */
+ __IO uint32_t CNDTR; /*!< DMA channel x number of data register */
+ __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */
+ __IO uint32_t CMAR; /*!< DMA channel x memory address register */
+}DMA_Channel_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */
+ __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */
+}DMA_TypeDef;
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!<EXTI Interrupt mask register, Address offset: 0x00 */
+ __IO uint32_t EMR; /*!<EXTI Event mask register, Address offset: 0x04 */
+ __IO uint32_t RTSR; /*!<EXTI Rising trigger selection register , Address offset: 0x08 */
+ __IO uint32_t FTSR; /*!<EXTI Falling trigger selection register, Address offset: 0x0C */
+ __IO uint32_t SWIER; /*!<EXTI Software interrupt event register, Address offset: 0x10 */
+ __IO uint32_t PR; /*!<EXTI Pending register, Address offset: 0x14 */
+}EXTI_TypeDef;
+
+/**
+ * @brief FLASH Registers
+ */
+typedef struct
+{
+ __IO uint32_t ACR; /*!<FLASH access control register, Address offset: 0x00 */
+ __IO uint32_t KEYR; /*!<FLASH key register, Address offset: 0x04 */
+ __IO uint32_t OPTKEYR; /*!<FLASH OPT key register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!<FLASH status register, Address offset: 0x0C */
+ __IO uint32_t CR; /*!<FLASH control register, Address offset: 0x10 */
+ __IO uint32_t AR; /*!<FLASH address register, Address offset: 0x14 */
+ __IO uint32_t RESERVED; /*!< Reserved, 0x18 */
+ __IO uint32_t OBR; /*!<FLASH option bytes register, Address offset: 0x1C */
+ __IO uint32_t WRPR; /*!<FLASH option bytes register, Address offset: 0x20 */
+}FLASH_TypeDef;
+
+
+/**
+ * @brief Option Bytes Registers
+ */
+typedef struct
+{
+ __IO uint16_t RDP; /*!< FLASH option byte Read protection, Address offset: 0x00 */
+ __IO uint16_t USER; /*!< FLASH option byte user options, Address offset: 0x02 */
+ __IO uint16_t DATA0; /*!< User data byte 0 (stored in FLASH_OBR[23:16]), Address offset: 0x04 */
+ __IO uint16_t DATA1; /*!< User data byte 1 (stored in FLASH_OBR[31:24]), Address offset: 0x06 */
+ __IO uint16_t WRP0; /*!< FLASH option byte write protection 0, Address offset: 0x08 */
+ __IO uint16_t WRP1; /*!< FLASH option byte write protection 1, Address offset: 0x0A */
+ __IO uint16_t WRP2; /*!< FLASH option byte write protection 2, Address offset: 0x0C */
+ __IO uint16_t WRP3; /*!< FLASH option byte write protection 3, Address offset: 0x0E */
+}OB_TypeDef;
+
+/**
+ * @brief General Purpose I/O
+ */
+
+typedef struct
+{
+ __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */
+ __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */
+ __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */
+ __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */
+ __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */
+ __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */
+ __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x1A */
+ __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */
+ __IO uint32_t AFR[2]; /*!< GPIO alternate function low register, Address offset: 0x20-0x24 */
+ __IO uint32_t BRR; /*!< GPIO bit reset register, Address offset: 0x28 */
+}GPIO_TypeDef;
+
+/**
+ * @brief SysTem Configuration
+ */
+
+typedef struct
+{
+ __IO uint32_t CFGR1; /*!< SYSCFG configuration register 1, Address offset: 0x00 */
+ uint32_t RESERVED; /*!< Reserved, 0x04 */
+ __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration register, Address offset: 0x14-0x08 */
+ __IO uint32_t CFGR2; /*!< SYSCFG configuration register 2, Address offset: 0x18 */
+}SYSCFG_TypeDef;
+
+/**
+ * @brief Inter-integrated Circuit Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */
+ __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */
+ __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */
+ __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */
+ __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */
+ __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */
+ __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */
+ __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */
+ __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */
+ __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */
+}I2C_TypeDef;
+
+/**
+ * @brief Independent WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */
+ __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */
+ __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */
+ __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */
+}IWDG_TypeDef;
+
+/**
+ * @brief Power Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< PWR power control register, Address offset: 0x00 */
+ __IO uint32_t CSR; /*!< PWR power control/status register, Address offset: 0x04 */
+}PWR_TypeDef;
+
+/**
+ * @brief Reset and Clock Control
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */
+ __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x04 */
+ __IO uint32_t CIR; /*!< RCC clock interrupt register, Address offset: 0x08 */
+ __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x0C */
+ __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x10 */
+ __IO uint32_t AHBENR; /*!< RCC AHB peripheral clock register, Address offset: 0x14 */
+ __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x18 */
+ __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x1C */
+ __IO uint32_t BDCR; /*!< RCC Backup domain control register, Address offset: 0x20 */
+ __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x24 */
+ __IO uint32_t AHBRSTR; /*!< RCC AHB peripheral reset register, Address offset: 0x28 */
+ __IO uint32_t CFGR2; /*!< RCC clock configuration register 2, Address offset: 0x2C */
+ __IO uint32_t CFGR3; /*!< RCC clock configuration register 3, Address offset: 0x30 */
+ __IO uint32_t CR2; /*!< RCC clock control register 2, Address offset: 0x34 */
+}RCC_TypeDef;
+
+/**
+ * @brief Real-Time Clock
+ */
+
+typedef struct
+{
+ __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */
+ __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */
+ uint32_t RESERVED1; /*!< Reserved, Address offset: 0x14 */
+ uint32_t RESERVED2; /*!< Reserved, Address offset: 0x18 */
+ __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */
+ uint32_t RESERVED3; /*!< Reserved, Address offset: 0x20 */
+ __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */
+ __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */
+ __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */
+ __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */
+ __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */
+ __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */
+ __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */
+ __IO uint32_t TAFCR; /*!< RTC tamper and alternate function configuration register, Address offset: 0x40 */
+ __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */
+ uint32_t RESERVED4; /*!< Reserved, Address offset: 0x48 */
+ uint32_t RESERVED5; /*!< Reserved, Address offset: 0x4C */
+ __IO uint32_t BKP0R; /*!< RTC backup register 0, Address offset: 0x50 */
+ __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */
+ __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */
+ __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */
+ __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */
+}RTC_TypeDef;
+
+/**
+ * @brief Serial Peripheral Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< SPI Control register 1 (not used in I2S mode), Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */
+ __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */
+ __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */
+ __IO uint32_t RXCRCR; /*!< SPI Rx CRC register (not used in I2S mode), Address offset: 0x14 */
+ __IO uint32_t TXCRCR; /*!< SPI Tx CRC register (not used in I2S mode), Address offset: 0x18 */
+ __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */
+ __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */
+}SPI_TypeDef;
+
+/**
+ * @brief TIM
+ */
+typedef struct
+{
+ __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */
+ __IO uint32_t SMCR; /*!< TIM slave Mode Control register, Address offset: 0x08 */
+ __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */
+ __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */
+ __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */
+ __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */
+ __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */
+ __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */
+ __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */
+ __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */
+ __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */
+ __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */
+ __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */
+ __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */
+ __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */
+ __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */
+ __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */
+ __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */
+ __IO uint32_t DMAR; /*!< TIM DMA address for full transfer register, Address offset: 0x4C */
+ __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */
+}TIM_TypeDef;
+
+/**
+ * @brief Touch Sensing Controller (TSC)
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< TSC control register, Address offset: 0x00 */
+ __IO uint32_t IER; /*!< TSC interrupt enable register, Address offset: 0x04 */
+ __IO uint32_t ICR; /*!< TSC interrupt clear register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< TSC interrupt status register, Address offset: 0x0C */
+ __IO uint32_t IOHCR; /*!< TSC I/O hysteresis control register, Address offset: 0x10 */
+ uint32_t RESERVED1; /*!< Reserved, Address offset: 0x14 */
+ __IO uint32_t IOASCR; /*!< TSC I/O analog switch control register, Address offset: 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, Address offset: 0x1C */
+ __IO uint32_t IOSCR; /*!< TSC I/O sampling control register, Address offset: 0x20 */
+ uint32_t RESERVED3; /*!< Reserved, Address offset: 0x24 */
+ __IO uint32_t IOCCR; /*!< TSC I/O channel control register, Address offset: 0x28 */
+ uint32_t RESERVED4; /*!< Reserved, Address offset: 0x2C */
+ __IO uint32_t IOGCSR; /*!< TSC I/O group control status register, Address offset: 0x30 */
+ __IO uint32_t IOGXCR[8]; /*!< TSC I/O group x counter register, Address offset: 0x34-50 */
+}TSC_TypeDef;
+
+/**
+ * @brief Universal Synchronous Asynchronous Receiver Transmitter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */
+ __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */
+ __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */
+ __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */
+ __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */
+ __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */
+ __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */
+ __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */
+ __IO uint16_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */
+ uint16_t RESERVED1; /*!< Reserved, 0x26 */
+ __IO uint16_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */
+ uint16_t RESERVED2; /*!< Reserved, 0x2A */
+}USART_TypeDef;
+
+/**
+ * @brief Universal Serial Bus Full Speed Device
+ */
+
+typedef struct
+{
+ __IO uint16_t EP0R; /*!< USB Endpoint 0 register, Address offset: 0x00 */
+ __IO uint16_t RESERVED0; /*!< Reserved */
+ __IO uint16_t EP1R; /*!< USB Endpoint 1 register, Address offset: 0x04 */
+ __IO uint16_t RESERVED1; /*!< Reserved */
+ __IO uint16_t EP2R; /*!< USB Endpoint 2 register, Address offset: 0x08 */
+ __IO uint16_t RESERVED2; /*!< Reserved */
+ __IO uint16_t EP3R; /*!< USB Endpoint 3 register, Address offset: 0x0C */
+ __IO uint16_t RESERVED3; /*!< Reserved */
+ __IO uint16_t EP4R; /*!< USB Endpoint 4 register, Address offset: 0x10 */
+ __IO uint16_t RESERVED4; /*!< Reserved */
+ __IO uint16_t EP5R; /*!< USB Endpoint 5 register, Address offset: 0x14 */
+ __IO uint16_t RESERVED5; /*!< Reserved */
+ __IO uint16_t EP6R; /*!< USB Endpoint 6 register, Address offset: 0x18 */
+ __IO uint16_t RESERVED6; /*!< Reserved */
+ __IO uint16_t EP7R; /*!< USB Endpoint 7 register, Address offset: 0x1C */
+ __IO uint16_t RESERVED7[17]; /*!< Reserved */
+ __IO uint16_t CNTR; /*!< Control register, Address offset: 0x40 */
+ __IO uint16_t RESERVED8; /*!< Reserved */
+ __IO uint16_t ISTR; /*!< Interrupt status register, Address offset: 0x44 */
+ __IO uint16_t RESERVED9; /*!< Reserved */
+ __IO uint16_t FNR; /*!< Frame number register, Address offset: 0x48 */
+ __IO uint16_t RESERVEDA; /*!< Reserved */
+ __IO uint16_t DADDR; /*!< Device address register, Address offset: 0x4C */
+ __IO uint16_t RESERVEDB; /*!< Reserved */
+ __IO uint16_t BTABLE; /*!< Buffer Table address register, Address offset: 0x50 */
+ __IO uint16_t RESERVEDC; /*!< Reserved */
+ __IO uint16_t LPMCSR; /*!< LPM Control and Status register, Address offset: 0x54 */
+ __IO uint16_t RESERVEDD; /*!< Reserved */
+ __IO uint16_t BCDR; /*!< Battery Charging detector register, Address offset: 0x58 */
+ __IO uint16_t RESERVEDE; /*!< Reserved */
+}USB_TypeDef;
+
+/**
+ * @brief Window WATCHDOG
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */
+ __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */
+}WWDG_TypeDef;
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_memory_map
+ * @{
+ */
+
+#define FLASH_BASE ((uint32_t)0x08000000) /*!< FLASH base address in the alias region */
+#define SRAM_BASE ((uint32_t)0x20000000) /*!< SRAM base address in the alias region */
+#define PERIPH_BASE ((uint32_t)0x40000000) /*!< Peripheral base address in the alias region */
+
+/*!< Peripheral memory map */
+#define APBPERIPH_BASE PERIPH_BASE
+#define AHBPERIPH_BASE (PERIPH_BASE + 0x00020000)
+#define AHB2PERIPH_BASE (PERIPH_BASE + 0x08000000)
+
+#define TIM2_BASE (APBPERIPH_BASE + 0x00000000)
+#define TIM3_BASE (APBPERIPH_BASE + 0x00000400)
+#define TIM14_BASE (APBPERIPH_BASE + 0x00002000)
+#define RTC_BASE (APBPERIPH_BASE + 0x00002800)
+#define WWDG_BASE (APBPERIPH_BASE + 0x00002C00)
+#define IWDG_BASE (APBPERIPH_BASE + 0x00003000)
+#define SPI2_BASE (APBPERIPH_BASE + 0x00003800)
+#define USART2_BASE (APBPERIPH_BASE + 0x00004400)
+#define I2C1_BASE (APBPERIPH_BASE + 0x00005400)
+#define USB_BASE (APBPERIPH_BASE + 0x00005C00) /*!< USB_IP Peripheral Registers base address */
+#define USB_PMAADDR (APBPERIPH_BASE + 0x00006000) /*!< USB_IP Packet Memory Area base address */
+#define CAN_BASE (APBPERIPH_BASE + 0x00006400)
+#define CRS_BASE (APBPERIPH_BASE + 0x00006C00)
+#define PWR_BASE (APBPERIPH_BASE + 0x00007000)
+#define CEC_BASE (APBPERIPH_BASE + 0x00007800)
+
+#define SYSCFG_BASE (APBPERIPH_BASE + 0x00010000)
+#define EXTI_BASE (APBPERIPH_BASE + 0x00010400)
+#define ADC1_BASE (APBPERIPH_BASE + 0x00012400)
+#define ADC_BASE (APBPERIPH_BASE + 0x00012708)
+#define TIM1_BASE (APBPERIPH_BASE + 0x00012C00)
+#define SPI1_BASE (APBPERIPH_BASE + 0x00013000)
+#define USART1_BASE (APBPERIPH_BASE + 0x00013800)
+#define TIM16_BASE (APBPERIPH_BASE + 0x00014400)
+#define TIM17_BASE (APBPERIPH_BASE + 0x00014800)
+#define DBGMCU_BASE (APBPERIPH_BASE + 0x00015800)
+
+#define DMA1_BASE (AHBPERIPH_BASE + 0x00000000)
+#define DMA1_Channel1_BASE (DMA1_BASE + 0x00000008)
+#define DMA1_Channel2_BASE (DMA1_BASE + 0x0000001C)
+#define DMA1_Channel3_BASE (DMA1_BASE + 0x00000030)
+#define DMA1_Channel4_BASE (DMA1_BASE + 0x00000044)
+#define DMA1_Channel5_BASE (DMA1_BASE + 0x00000058)
+#define DMA1_Channel6_BASE (DMA1_BASE + 0x0000006C)
+#define DMA1_Channel7_BASE (DMA1_BASE + 0x00000080)
+
+#define RCC_BASE (AHBPERIPH_BASE + 0x00001000)
+#define FLASH_R_BASE (AHBPERIPH_BASE + 0x00002000) /*!< FLASH registers base address */
+#define OB_BASE ((uint32_t)0x1FFFF800) /*!< FLASH Option Bytes base address */
+#define CRC_BASE (AHBPERIPH_BASE + 0x00003000)
+#define TSC_BASE (AHBPERIPH_BASE + 0x00004000)
+
+#define GPIOA_BASE (AHB2PERIPH_BASE + 0x00000000)
+#define GPIOB_BASE (AHB2PERIPH_BASE + 0x00000400)
+#define GPIOC_BASE (AHB2PERIPH_BASE + 0x00000800)
+#define GPIOF_BASE (AHB2PERIPH_BASE + 0x00001400)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_declaration
+ * @{
+ */
+
+#define TIM2 ((TIM_TypeDef *) TIM2_BASE)
+#define TIM3 ((TIM_TypeDef *) TIM3_BASE)
+#define TIM14 ((TIM_TypeDef *) TIM14_BASE)
+#define RTC ((RTC_TypeDef *) RTC_BASE)
+#define WWDG ((WWDG_TypeDef *) WWDG_BASE)
+#define IWDG ((IWDG_TypeDef *) IWDG_BASE)
+#define USART2 ((USART_TypeDef *) USART2_BASE)
+#define I2C1 ((I2C_TypeDef *) I2C1_BASE)
+#define CAN ((CAN_TypeDef *) CAN_BASE)
+#define CRS ((CRS_TypeDef *) CRS_BASE)
+#define PWR ((PWR_TypeDef *) PWR_BASE)
+#define CEC ((CEC_TypeDef *) CEC_BASE)
+#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE)
+#define EXTI ((EXTI_TypeDef *) EXTI_BASE)
+#define ADC1 ((ADC_TypeDef *) ADC1_BASE)
+#define ADC ((ADC_Common_TypeDef *) ADC_BASE)
+#define TIM1 ((TIM_TypeDef *) TIM1_BASE)
+#define SPI1 ((SPI_TypeDef *) SPI1_BASE)
+#define SPI2 ((SPI_TypeDef *) SPI2_BASE)
+#define USART1 ((USART_TypeDef *) USART1_BASE)
+#define TIM16 ((TIM_TypeDef *) TIM16_BASE)
+#define TIM17 ((TIM_TypeDef *) TIM17_BASE)
+#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE)
+#define DMA1 ((DMA_TypeDef *) DMA1_BASE)
+#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE)
+#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE)
+#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE)
+#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE)
+#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE)
+#define DMA1_Channel6 ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE)
+#define DMA1_Channel7 ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE)
+#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE)
+#define OB ((OB_TypeDef *) OB_BASE)
+#define RCC ((RCC_TypeDef *) RCC_BASE)
+#define CRC ((CRC_TypeDef *) CRC_BASE)
+#define TSC ((TSC_TypeDef *) TSC_BASE)
+#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE)
+#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE)
+#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE)
+#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE)
+#define USB ((USB_TypeDef *) USB_BASE)
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_constants
+ * @{
+ */
+
+ /** @addtogroup Peripheral_Registers_Bits_Definition
+ * @{
+ */
+
+/******************************************************************************/
+/* Peripheral Registers Bits Definition */
+/******************************************************************************/
+/******************************************************************************/
+/* */
+/* Analog to Digital Converter (ADC) */
+/* */
+/******************************************************************************/
+/******************** Bits definition for ADC_ISR register ******************/
+#define ADC_ISR_AWD ((uint32_t)0x00000080) /*!< Analog watchdog flag */
+#define ADC_ISR_OVR ((uint32_t)0x00000010) /*!< Overrun flag */
+#define ADC_ISR_EOSEQ ((uint32_t)0x00000008) /*!< End of Sequence flag */
+#define ADC_ISR_EOC ((uint32_t)0x00000004) /*!< End of Conversion */
+#define ADC_ISR_EOSMP ((uint32_t)0x00000002) /*!< End of sampling flag */
+#define ADC_ISR_ADRDY ((uint32_t)0x00000001) /*!< ADC Ready */
+
+/* Old EOSEQ bit definition, maintained for legacy purpose */
+#define ADC_ISR_EOS ADC_ISR_EOSEQ
+
+/******************** Bits definition for ADC_IER register ******************/
+#define ADC_IER_AWDIE ((uint32_t)0x00000080) /*!< Analog Watchdog interrupt enable */
+#define ADC_IER_OVRIE ((uint32_t)0x00000010) /*!< Overrun interrupt enable */
+#define ADC_IER_EOSEQIE ((uint32_t)0x00000008) /*!< End of Sequence of conversion interrupt enable */
+#define ADC_IER_EOCIE ((uint32_t)0x00000004) /*!< End of Conversion interrupt enable */
+#define ADC_IER_EOSMPIE ((uint32_t)0x00000002) /*!< End of sampling interrupt enable */
+#define ADC_IER_ADRDYIE ((uint32_t)0x00000001) /*!< ADC Ready interrupt enable */
+
+/* Old EOSEQIE bit definition, maintained for legacy purpose */
+#define ADC_IER_EOSIE ADC_IER_EOSEQIE
+
+/******************** Bits definition for ADC_CR register *******************/
+#define ADC_CR_ADCAL ((uint32_t)0x80000000) /*!< ADC calibration */
+#define ADC_CR_ADSTP ((uint32_t)0x00000010) /*!< ADC stop of conversion command */
+#define ADC_CR_ADSTART ((uint32_t)0x00000004) /*!< ADC start of conversion */
+#define ADC_CR_ADDIS ((uint32_t)0x00000002) /*!< ADC disable command */
+#define ADC_CR_ADEN ((uint32_t)0x00000001) /*!< ADC enable control */
+
+/******************* Bits definition for ADC_CFGR1 register *****************/
+#define ADC_CFGR1_AWDCH ((uint32_t)0x7C000000) /*!< AWDCH[4:0] bits (Analog watchdog channel select bits) */
+#define ADC_CFGR1_AWDCH_0 ((uint32_t)0x04000000) /*!< Bit 0 */
+#define ADC_CFGR1_AWDCH_1 ((uint32_t)0x08000000) /*!< Bit 1 */
+#define ADC_CFGR1_AWDCH_2 ((uint32_t)0x10000000) /*!< Bit 2 */
+#define ADC_CFGR1_AWDCH_3 ((uint32_t)0x20000000) /*!< Bit 3 */
+#define ADC_CFGR1_AWDCH_4 ((uint32_t)0x40000000) /*!< Bit 4 */
+#define ADC_CFGR1_AWDEN ((uint32_t)0x00800000) /*!< Analog watchdog enable on regular channels */
+#define ADC_CFGR1_AWDSGL ((uint32_t)0x00400000) /*!< Enable the watchdog on a single channel or on all channels */
+#define ADC_CFGR1_DISCEN ((uint32_t)0x00010000) /*!< Discontinuous mode on regular channels */
+#define ADC_CFGR1_AUTOFF ((uint32_t)0x00008000) /*!< ADC auto power off */
+#define ADC_CFGR1_WAIT ((uint32_t)0x00004000) /*!< ADC wait conversion mode */
+#define ADC_CFGR1_CONT ((uint32_t)0x00002000) /*!< Continuous Conversion */
+#define ADC_CFGR1_OVRMOD ((uint32_t)0x00001000) /*!< Overrun mode */
+#define ADC_CFGR1_EXTEN ((uint32_t)0x00000C00) /*!< EXTEN[1:0] bits (External Trigger Conversion mode for regular channels) */
+#define ADC_CFGR1_EXTEN_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define ADC_CFGR1_EXTEN_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define ADC_CFGR1_EXTSEL ((uint32_t)0x000001C0) /*!< EXTSEL[2:0] bits (External Event Select for regular group) */
+#define ADC_CFGR1_EXTSEL_0 ((uint32_t)0x00000040) /*!< Bit 0 */
+#define ADC_CFGR1_EXTSEL_1 ((uint32_t)0x00000080) /*!< Bit 1 */
+#define ADC_CFGR1_EXTSEL_2 ((uint32_t)0x00000100) /*!< Bit 2 */
+#define ADC_CFGR1_ALIGN ((uint32_t)0x00000020) /*!< Data Alignment */
+#define ADC_CFGR1_RES ((uint32_t)0x00000018) /*!< RES[1:0] bits (Resolution) */
+#define ADC_CFGR1_RES_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define ADC_CFGR1_RES_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define ADC_CFGR1_SCANDIR ((uint32_t)0x00000004) /*!< Sequence scan direction */
+#define ADC_CFGR1_DMACFG ((uint32_t)0x00000002) /*!< Direct memory access configuration */
+#define ADC_CFGR1_DMAEN ((uint32_t)0x00000001) /*!< Direct memory access enable */
+
+/* Old WAIT bit definition, maintained for legacy purpose */
+#define ADC_CFGR1_AUTDLY ADC_CFGR1_WAIT
+
+/******************* Bits definition for ADC_CFGR2 register *****************/
+#define ADC_CFGR2_CKMODE ((uint32_t)0xC0000000) /*!< ADC clock mode */
+#define ADC_CFGR2_CKMODE_1 ((uint32_t)0x80000000) /*!< ADC clocked by PCLK div4 */
+#define ADC_CFGR2_CKMODE_0 ((uint32_t)0x40000000) /*!< ADC clocked by PCLK div2 */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_CFGR2_JITOFFDIV4 ADC_CFGR2_CKMODE_1 /*!< ADC clocked by PCLK div4 */
+#define ADC_CFGR2_JITOFFDIV2 ADC_CFGR2_CKMODE_0 /*!< ADC clocked by PCLK div2 */
+
+/****************** Bit definition for ADC_SMPR register ********************/
+#define ADC_SMPR_SMP ((uint32_t)0x00000007) /*!< SMP[2:0] bits (Sampling time selection) */
+#define ADC_SMPR_SMP_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define ADC_SMPR_SMP_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define ADC_SMPR_SMP_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_SMPR1_SMPR ADC_SMPR_SMP /*!< SMP[2:0] bits (Sampling time selection) */
+#define ADC_SMPR1_SMPR_0 ADC_SMPR_SMP_0 /*!< Bit 0 */
+#define ADC_SMPR1_SMPR_1 ADC_SMPR_SMP_1 /*!< Bit 1 */
+#define ADC_SMPR1_SMPR_2 ADC_SMPR_SMP_2 /*!< Bit 2 */
+
+/******************* Bit definition for ADC_TR register ********************/
+#define ADC_TR_HT ((uint32_t)0x0FFF0000) /*!< Analog watchdog high threshold */
+#define ADC_TR_LT ((uint32_t)0x00000FFF) /*!< Analog watchdog low threshold */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_HTR_HT ADC_TR_HT /*!< Analog watchdog high threshold */
+#define ADC_LTR_LT ADC_TR_LT /*!< Analog watchdog low threshold */
+
+/****************** Bit definition for ADC_CHSELR register ******************/
+#define ADC_CHSELR_CHSEL18 ((uint32_t)0x00040000) /*!< Channel 18 selection */
+#define ADC_CHSELR_CHSEL17 ((uint32_t)0x00020000) /*!< Channel 17 selection */
+#define ADC_CHSELR_CHSEL16 ((uint32_t)0x00010000) /*!< Channel 16 selection */
+#define ADC_CHSELR_CHSEL15 ((uint32_t)0x00008000) /*!< Channel 15 selection */
+#define ADC_CHSELR_CHSEL14 ((uint32_t)0x00004000) /*!< Channel 14 selection */
+#define ADC_CHSELR_CHSEL13 ((uint32_t)0x00002000) /*!< Channel 13 selection */
+#define ADC_CHSELR_CHSEL12 ((uint32_t)0x00001000) /*!< Channel 12 selection */
+#define ADC_CHSELR_CHSEL11 ((uint32_t)0x00000800) /*!< Channel 11 selection */
+#define ADC_CHSELR_CHSEL10 ((uint32_t)0x00000400) /*!< Channel 10 selection */
+#define ADC_CHSELR_CHSEL9 ((uint32_t)0x00000200) /*!< Channel 9 selection */
+#define ADC_CHSELR_CHSEL8 ((uint32_t)0x00000100) /*!< Channel 8 selection */
+#define ADC_CHSELR_CHSEL7 ((uint32_t)0x00000080) /*!< Channel 7 selection */
+#define ADC_CHSELR_CHSEL6 ((uint32_t)0x00000040) /*!< Channel 6 selection */
+#define ADC_CHSELR_CHSEL5 ((uint32_t)0x00000020) /*!< Channel 5 selection */
+#define ADC_CHSELR_CHSEL4 ((uint32_t)0x00000010) /*!< Channel 4 selection */
+#define ADC_CHSELR_CHSEL3 ((uint32_t)0x00000008) /*!< Channel 3 selection */
+#define ADC_CHSELR_CHSEL2 ((uint32_t)0x00000004) /*!< Channel 2 selection */
+#define ADC_CHSELR_CHSEL1 ((uint32_t)0x00000002) /*!< Channel 1 selection */
+#define ADC_CHSELR_CHSEL0 ((uint32_t)0x00000001) /*!< Channel 0 selection */
+
+/******************** Bit definition for ADC_DR register ********************/
+#define ADC_DR_DATA ((uint32_t)0x0000FFFF) /*!< Regular data */
+
+/******************* Bit definition for ADC_CCR register ********************/
+#define ADC_CCR_VBATEN ((uint32_t)0x01000000) /*!< Voltage battery enable */
+#define ADC_CCR_TSEN ((uint32_t)0x00800000) /*!< Tempurature sensore enable */
+#define ADC_CCR_VREFEN ((uint32_t)0x00400000) /*!< Vrefint enable */
+
+/******************************************************************************/
+/* */
+/* Controller Area Network (CAN ) */
+/* */
+/******************************************************************************/
+/*!<CAN control and status registers */
+/******************* Bit definition for CAN_MCR register ********************/
+#define CAN_MCR_INRQ ((uint32_t)0x00000001) /*!<Initialization Request */
+#define CAN_MCR_SLEEP ((uint32_t)0x00000002) /*!<Sleep Mode Request */
+#define CAN_MCR_TXFP ((uint32_t)0x00000004) /*!<Transmit FIFO Priority */
+#define CAN_MCR_RFLM ((uint32_t)0x00000008) /*!<Receive FIFO Locked Mode */
+#define CAN_MCR_NART ((uint32_t)0x00000010) /*!<No Automatic Retransmission */
+#define CAN_MCR_AWUM ((uint32_t)0x00000020) /*!<Automatic Wakeup Mode */
+#define CAN_MCR_ABOM ((uint32_t)0x00000040) /*!<Automatic Bus-Off Management */
+#define CAN_MCR_TTCM ((uint32_t)0x00000080) /*!<Time Triggered Communication Mode */
+#define CAN_MCR_RESET ((uint32_t)0x00008000) /*!<bxCAN software master reset */
+
+/******************* Bit definition for CAN_MSR register ********************/
+#define CAN_MSR_INAK ((uint32_t)0x00000001) /*!<Initialization Acknowledge */
+#define CAN_MSR_SLAK ((uint32_t)0x00000002) /*!<Sleep Acknowledge */
+#define CAN_MSR_ERRI ((uint32_t)0x00000004) /*!<Error Interrupt */
+#define CAN_MSR_WKUI ((uint32_t)0x00000008) /*!<Wakeup Interrupt */
+#define CAN_MSR_SLAKI ((uint32_t)0x00000010) /*!<Sleep Acknowledge Interrupt */
+#define CAN_MSR_TXM ((uint32_t)0x00000100) /*!<Transmit Mode */
+#define CAN_MSR_RXM ((uint32_t)0x00000200) /*!<Receive Mode */
+#define CAN_MSR_SAMP ((uint32_t)0x00000400) /*!<Last Sample Point */
+#define CAN_MSR_RX ((uint32_t)0x00000800) /*!<CAN Rx Signal */
+
+/******************* Bit definition for CAN_TSR register ********************/
+#define CAN_TSR_RQCP0 ((uint32_t)0x00000001) /*!<Request Completed Mailbox0 */
+#define CAN_TSR_TXOK0 ((uint32_t)0x00000002) /*!<Transmission OK of Mailbox0 */
+#define CAN_TSR_ALST0 ((uint32_t)0x00000004) /*!<Arbitration Lost for Mailbox0 */
+#define CAN_TSR_TERR0 ((uint32_t)0x00000008) /*!<Transmission Error of Mailbox0 */
+#define CAN_TSR_ABRQ0 ((uint32_t)0x00000080) /*!<Abort Request for Mailbox0 */
+#define CAN_TSR_RQCP1 ((uint32_t)0x00000100) /*!<Request Completed Mailbox1 */
+#define CAN_TSR_TXOK1 ((uint32_t)0x00000200) /*!<Transmission OK of Mailbox1 */
+#define CAN_TSR_ALST1 ((uint32_t)0x00000400) /*!<Arbitration Lost for Mailbox1 */
+#define CAN_TSR_TERR1 ((uint32_t)0x00000800) /*!<Transmission Error of Mailbox1 */
+#define CAN_TSR_ABRQ1 ((uint32_t)0x00008000) /*!<Abort Request for Mailbox 1 */
+#define CAN_TSR_RQCP2 ((uint32_t)0x00010000) /*!<Request Completed Mailbox2 */
+#define CAN_TSR_TXOK2 ((uint32_t)0x00020000) /*!<Transmission OK of Mailbox 2 */
+#define CAN_TSR_ALST2 ((uint32_t)0x00040000) /*!<Arbitration Lost for mailbox 2 */
+#define CAN_TSR_TERR2 ((uint32_t)0x00080000) /*!<Transmission Error of Mailbox 2 */
+#define CAN_TSR_ABRQ2 ((uint32_t)0x00800000) /*!<Abort Request for Mailbox 2 */
+#define CAN_TSR_CODE ((uint32_t)0x03000000) /*!<Mailbox Code */
+
+#define CAN_TSR_TME ((uint32_t)0x1C000000) /*!<TME[2:0] bits */
+#define CAN_TSR_TME0 ((uint32_t)0x04000000) /*!<Transmit Mailbox 0 Empty */
+#define CAN_TSR_TME1 ((uint32_t)0x08000000) /*!<Transmit Mailbox 1 Empty */
+#define CAN_TSR_TME2 ((uint32_t)0x10000000) /*!<Transmit Mailbox 2 Empty */
+
+#define CAN_TSR_LOW ((uint32_t)0xE0000000) /*!<LOW[2:0] bits */
+#define CAN_TSR_LOW0 ((uint32_t)0x20000000) /*!<Lowest Priority Flag for Mailbox 0 */
+#define CAN_TSR_LOW1 ((uint32_t)0x40000000) /*!<Lowest Priority Flag for Mailbox 1 */
+#define CAN_TSR_LOW2 ((uint32_t)0x80000000) /*!<Lowest Priority Flag for Mailbox 2 */
+
+/******************* Bit definition for CAN_RF0R register *******************/
+#define CAN_RF0R_FMP0 ((uint32_t)0x00000003) /*!<FIFO 0 Message Pending */
+#define CAN_RF0R_FULL0 ((uint32_t)0x00000008) /*!<FIFO 0 Full */
+#define CAN_RF0R_FOVR0 ((uint32_t)0x00000010) /*!<FIFO 0 Overrun */
+#define CAN_RF0R_RFOM0 ((uint32_t)0x00000020) /*!<Release FIFO 0 Output Mailbox */
+
+/******************* Bit definition for CAN_RF1R register *******************/
+#define CAN_RF1R_FMP1 ((uint32_t)0x00000003) /*!<FIFO 1 Message Pending */
+#define CAN_RF1R_FULL1 ((uint32_t)0x00000008) /*!<FIFO 1 Full */
+#define CAN_RF1R_FOVR1 ((uint32_t)0x00000010) /*!<FIFO 1 Overrun */
+#define CAN_RF1R_RFOM1 ((uint32_t)0x00000020) /*!<Release FIFO 1 Output Mailbox */
+
+/******************** Bit definition for CAN_IER register *******************/
+#define CAN_IER_TMEIE ((uint32_t)0x00000001) /*!<Transmit Mailbox Empty Interrupt Enable */
+#define CAN_IER_FMPIE0 ((uint32_t)0x00000002) /*!<FIFO Message Pending Interrupt Enable */
+#define CAN_IER_FFIE0 ((uint32_t)0x00000004) /*!<FIFO Full Interrupt Enable */
+#define CAN_IER_FOVIE0 ((uint32_t)0x00000008) /*!<FIFO Overrun Interrupt Enable */
+#define CAN_IER_FMPIE1 ((uint32_t)0x00000010) /*!<FIFO Message Pending Interrupt Enable */
+#define CAN_IER_FFIE1 ((uint32_t)0x00000020) /*!<FIFO Full Interrupt Enable */
+#define CAN_IER_FOVIE1 ((uint32_t)0x00000040) /*!<FIFO Overrun Interrupt Enable */
+#define CAN_IER_EWGIE ((uint32_t)0x00000100) /*!<Error Warning Interrupt Enable */
+#define CAN_IER_EPVIE ((uint32_t)0x00000200) /*!<Error Passive Interrupt Enable */
+#define CAN_IER_BOFIE ((uint32_t)0x00000400) /*!<Bus-Off Interrupt Enable */
+#define CAN_IER_LECIE ((uint32_t)0x00000800) /*!<Last Error Code Interrupt Enable */
+#define CAN_IER_ERRIE ((uint32_t)0x00008000) /*!<Error Interrupt Enable */
+#define CAN_IER_WKUIE ((uint32_t)0x00010000) /*!<Wakeup Interrupt Enable */
+#define CAN_IER_SLKIE ((uint32_t)0x00020000) /*!<Sleep Interrupt Enable */
+
+/******************** Bit definition for CAN_ESR register *******************/
+#define CAN_ESR_EWGF ((uint32_t)0x00000001) /*!<Error Warning Flag */
+#define CAN_ESR_EPVF ((uint32_t)0x00000002) /*!<Error Passive Flag */
+#define CAN_ESR_BOFF ((uint32_t)0x00000004) /*!<Bus-Off Flag */
+
+#define CAN_ESR_LEC ((uint32_t)0x00000070) /*!<LEC[2:0] bits (Last Error Code) */
+#define CAN_ESR_LEC_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define CAN_ESR_LEC_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define CAN_ESR_LEC_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define CAN_ESR_TEC ((uint32_t)0x00FF0000) /*!<Least significant byte of the 9-bit Transmit Error Counter */
+#define CAN_ESR_REC ((uint32_t)0xFF000000) /*!<Receive Error Counter */
+
+/******************* Bit definition for CAN_BTR register ********************/
+#define CAN_BTR_BRP ((uint32_t)0x000003FF) /*!<Baud Rate Prescaler */
+#define CAN_BTR_TS1 ((uint32_t)0x000F0000) /*!<Time Segment 1 */
+#define CAN_BTR_TS1_0 ((uint32_t)0x00010000) /*!<Time Segment 1 (Bit 0) */
+#define CAN_BTR_TS1_1 ((uint32_t)0x00020000) /*!<Time Segment 1 (Bit 1) */
+#define CAN_BTR_TS1_2 ((uint32_t)0x00040000) /*!<Time Segment 1 (Bit 2) */
+#define CAN_BTR_TS1_3 ((uint32_t)0x00080000) /*!<Time Segment 1 (Bit 3) */
+#define CAN_BTR_TS2 ((uint32_t)0x00700000) /*!<Time Segment 2 */
+#define CAN_BTR_TS2_0 ((uint32_t)0x00100000) /*!<Time Segment 2 (Bit 0) */
+#define CAN_BTR_TS2_1 ((uint32_t)0x00200000) /*!<Time Segment 2 (Bit 1) */
+#define CAN_BTR_TS2_2 ((uint32_t)0x00400000) /*!<Time Segment 2 (Bit 2) */
+#define CAN_BTR_SJW ((uint32_t)0x03000000) /*!<Resynchronization Jump Width */
+#define CAN_BTR_SJW_0 ((uint32_t)0x01000000) /*!<Resynchronization Jump Width (Bit 0) */
+#define CAN_BTR_SJW_1 ((uint32_t)0x02000000) /*!<Resynchronization Jump Width (Bit 1) */
+#define CAN_BTR_LBKM ((uint32_t)0x40000000) /*!<Loop Back Mode (Debug) */
+#define CAN_BTR_SILM ((uint32_t)0x80000000) /*!<Silent Mode */
+
+/*!<Mailbox registers */
+/****************** Bit definition for CAN_TI0R register ********************/
+#define CAN_TI0R_TXRQ ((uint32_t)0x00000001) /*!<Transmit Mailbox Request */
+#define CAN_TI0R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_TI0R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_TI0R_EXID ((uint32_t)0x001FFFF8) /*!<Extended Identifier */
+#define CAN_TI0R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/****************** Bit definition for CAN_TDT0R register *******************/
+#define CAN_TDT0R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_TDT0R_TGT ((uint32_t)0x00000100) /*!<Transmit Global Time */
+#define CAN_TDT0R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/****************** Bit definition for CAN_TDL0R register *******************/
+#define CAN_TDL0R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_TDL0R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_TDL0R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_TDL0R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/****************** Bit definition for CAN_TDH0R register *******************/
+#define CAN_TDH0R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_TDH0R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_TDH0R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_TDH0R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/******************* Bit definition for CAN_TI1R register *******************/
+#define CAN_TI1R_TXRQ ((uint32_t)0x00000001) /*!<Transmit Mailbox Request */
+#define CAN_TI1R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_TI1R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_TI1R_EXID ((uint32_t)0x001FFFF8) /*!<Extended Identifier */
+#define CAN_TI1R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/******************* Bit definition for CAN_TDT1R register ******************/
+#define CAN_TDT1R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_TDT1R_TGT ((uint32_t)0x00000100) /*!<Transmit Global Time */
+#define CAN_TDT1R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/******************* Bit definition for CAN_TDL1R register ******************/
+#define CAN_TDL1R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_TDL1R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_TDL1R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_TDL1R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/******************* Bit definition for CAN_TDH1R register ******************/
+#define CAN_TDH1R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_TDH1R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_TDH1R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_TDH1R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/******************* Bit definition for CAN_TI2R register *******************/
+#define CAN_TI2R_TXRQ ((uint32_t)0x00000001) /*!<Transmit Mailbox Request */
+#define CAN_TI2R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_TI2R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_TI2R_EXID ((uint32_t)0x001FFFF8) /*!<Extended identifier */
+#define CAN_TI2R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/******************* Bit definition for CAN_TDT2R register ******************/
+#define CAN_TDT2R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_TDT2R_TGT ((uint32_t)0x00000100) /*!<Transmit Global Time */
+#define CAN_TDT2R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/******************* Bit definition for CAN_TDL2R register ******************/
+#define CAN_TDL2R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_TDL2R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_TDL2R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_TDL2R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/******************* Bit definition for CAN_TDH2R register ******************/
+#define CAN_TDH2R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_TDH2R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_TDH2R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_TDH2R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/******************* Bit definition for CAN_RI0R register *******************/
+#define CAN_RI0R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_RI0R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_RI0R_EXID ((uint32_t)0x001FFFF8) /*!<Extended Identifier */
+#define CAN_RI0R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/******************* Bit definition for CAN_RDT0R register ******************/
+#define CAN_RDT0R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_RDT0R_FMI ((uint32_t)0x0000FF00) /*!<Filter Match Index */
+#define CAN_RDT0R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/******************* Bit definition for CAN_RDL0R register ******************/
+#define CAN_RDL0R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_RDL0R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_RDL0R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_RDL0R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/******************* Bit definition for CAN_RDH0R register ******************/
+#define CAN_RDH0R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_RDH0R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_RDH0R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_RDH0R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/******************* Bit definition for CAN_RI1R register *******************/
+#define CAN_RI1R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_RI1R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_RI1R_EXID ((uint32_t)0x001FFFF8) /*!<Extended identifier */
+#define CAN_RI1R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/******************* Bit definition for CAN_RDT1R register ******************/
+#define CAN_RDT1R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_RDT1R_FMI ((uint32_t)0x0000FF00) /*!<Filter Match Index */
+#define CAN_RDT1R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/******************* Bit definition for CAN_RDL1R register ******************/
+#define CAN_RDL1R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_RDL1R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_RDL1R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_RDL1R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/******************* Bit definition for CAN_RDH1R register ******************/
+#define CAN_RDH1R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_RDH1R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_RDH1R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_RDH1R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/*!<CAN filter registers */
+/******************* Bit definition for CAN_FMR register ********************/
+#define CAN_FMR_FINIT ((uint32_t)0x00000001) /*!<Filter Init Mode */
+
+/******************* Bit definition for CAN_FM1R register *******************/
+#define CAN_FM1R_FBM ((uint32_t)0x00003FFF) /*!<Filter Mode */
+#define CAN_FM1R_FBM0 ((uint32_t)0x00000001) /*!<Filter Init Mode bit 0 */
+#define CAN_FM1R_FBM1 ((uint32_t)0x00000002) /*!<Filter Init Mode bit 1 */
+#define CAN_FM1R_FBM2 ((uint32_t)0x00000004) /*!<Filter Init Mode bit 2 */
+#define CAN_FM1R_FBM3 ((uint32_t)0x00000008) /*!<Filter Init Mode bit 3 */
+#define CAN_FM1R_FBM4 ((uint32_t)0x00000010) /*!<Filter Init Mode bit 4 */
+#define CAN_FM1R_FBM5 ((uint32_t)0x00000020) /*!<Filter Init Mode bit 5 */
+#define CAN_FM1R_FBM6 ((uint32_t)0x00000040) /*!<Filter Init Mode bit 6 */
+#define CAN_FM1R_FBM7 ((uint32_t)0x00000080) /*!<Filter Init Mode bit 7 */
+#define CAN_FM1R_FBM8 ((uint32_t)0x00000100) /*!<Filter Init Mode bit 8 */
+#define CAN_FM1R_FBM9 ((uint32_t)0x00000200) /*!<Filter Init Mode bit 9 */
+#define CAN_FM1R_FBM10 ((uint32_t)0x00000400) /*!<Filter Init Mode bit 10 */
+#define CAN_FM1R_FBM11 ((uint32_t)0x00000800) /*!<Filter Init Mode bit 11 */
+#define CAN_FM1R_FBM12 ((uint32_t)0x00001000) /*!<Filter Init Mode bit 12 */
+#define CAN_FM1R_FBM13 ((uint32_t)0x00002000) /*!<Filter Init Mode bit 13 */
+
+/******************* Bit definition for CAN_FS1R register *******************/
+#define CAN_FS1R_FSC ((uint32_t)0x00003FFF) /*!<Filter Scale Configuration */
+#define CAN_FS1R_FSC0 ((uint32_t)0x00000001) /*!<Filter Scale Configuration bit 0 */
+#define CAN_FS1R_FSC1 ((uint32_t)0x00000002) /*!<Filter Scale Configuration bit 1 */
+#define CAN_FS1R_FSC2 ((uint32_t)0x00000004) /*!<Filter Scale Configuration bit 2 */
+#define CAN_FS1R_FSC3 ((uint32_t)0x00000008) /*!<Filter Scale Configuration bit 3 */
+#define CAN_FS1R_FSC4 ((uint32_t)0x00000010) /*!<Filter Scale Configuration bit 4 */
+#define CAN_FS1R_FSC5 ((uint32_t)0x00000020) /*!<Filter Scale Configuration bit 5 */
+#define CAN_FS1R_FSC6 ((uint32_t)0x00000040) /*!<Filter Scale Configuration bit 6 */
+#define CAN_FS1R_FSC7 ((uint32_t)0x00000080) /*!<Filter Scale Configuration bit 7 */
+#define CAN_FS1R_FSC8 ((uint32_t)0x00000100) /*!<Filter Scale Configuration bit 8 */
+#define CAN_FS1R_FSC9 ((uint32_t)0x00000200) /*!<Filter Scale Configuration bit 9 */
+#define CAN_FS1R_FSC10 ((uint32_t)0x00000400) /*!<Filter Scale Configuration bit 10 */
+#define CAN_FS1R_FSC11 ((uint32_t)0x00000800) /*!<Filter Scale Configuration bit 11 */
+#define CAN_FS1R_FSC12 ((uint32_t)0x00001000) /*!<Filter Scale Configuration bit 12 */
+#define CAN_FS1R_FSC13 ((uint32_t)0x00002000) /*!<Filter Scale Configuration bit 13 */
+
+/****************** Bit definition for CAN_FFA1R register *******************/
+#define CAN_FFA1R_FFA ((uint32_t)0x00003FFF) /*!<Filter FIFO Assignment */
+#define CAN_FFA1R_FFA0 ((uint32_t)0x00000001) /*!<Filter FIFO Assignment for Filter 0 */
+#define CAN_FFA1R_FFA1 ((uint32_t)0x00000002) /*!<Filter FIFO Assignment for Filter 1 */
+#define CAN_FFA1R_FFA2 ((uint32_t)0x00000004) /*!<Filter FIFO Assignment for Filter 2 */
+#define CAN_FFA1R_FFA3 ((uint32_t)0x00000008) /*!<Filter FIFO Assignment for Filter 3 */
+#define CAN_FFA1R_FFA4 ((uint32_t)0x00000010) /*!<Filter FIFO Assignment for Filter 4 */
+#define CAN_FFA1R_FFA5 ((uint32_t)0x00000020) /*!<Filter FIFO Assignment for Filter 5 */
+#define CAN_FFA1R_FFA6 ((uint32_t)0x00000040) /*!<Filter FIFO Assignment for Filter 6 */
+#define CAN_FFA1R_FFA7 ((uint32_t)0x00000080) /*!<Filter FIFO Assignment for Filter 7 */
+#define CAN_FFA1R_FFA8 ((uint32_t)0x00000100) /*!<Filter FIFO Assignment for Filter 8 */
+#define CAN_FFA1R_FFA9 ((uint32_t)0x00000200) /*!<Filter FIFO Assignment for Filter 9 */
+#define CAN_FFA1R_FFA10 ((uint32_t)0x00000400) /*!<Filter FIFO Assignment for Filter 10 */
+#define CAN_FFA1R_FFA11 ((uint32_t)0x00000800) /*!<Filter FIFO Assignment for Filter 11 */
+#define CAN_FFA1R_FFA12 ((uint32_t)0x00001000) /*!<Filter FIFO Assignment for Filter 12 */
+#define CAN_FFA1R_FFA13 ((uint32_t)0x00002000) /*!<Filter FIFO Assignment for Filter 13 */
+
+/******************* Bit definition for CAN_FA1R register *******************/
+#define CAN_FA1R_FACT ((uint32_t)0x00003FFF) /*!<Filter Active */
+#define CAN_FA1R_FACT0 ((uint32_t)0x00000001) /*!<Filter 0 Active */
+#define CAN_FA1R_FACT1 ((uint32_t)0x00000002) /*!<Filter 1 Active */
+#define CAN_FA1R_FACT2 ((uint32_t)0x00000004) /*!<Filter 2 Active */
+#define CAN_FA1R_FACT3 ((uint32_t)0x00000008) /*!<Filter 3 Active */
+#define CAN_FA1R_FACT4 ((uint32_t)0x00000010) /*!<Filter 4 Active */
+#define CAN_FA1R_FACT5 ((uint32_t)0x00000020) /*!<Filter 5 Active */
+#define CAN_FA1R_FACT6 ((uint32_t)0x00000040) /*!<Filter 6 Active */
+#define CAN_FA1R_FACT7 ((uint32_t)0x00000080) /*!<Filter 7 Active */
+#define CAN_FA1R_FACT8 ((uint32_t)0x00000100) /*!<Filter 8 Active */
+#define CAN_FA1R_FACT9 ((uint32_t)0x00000200) /*!<Filter 9 Active */
+#define CAN_FA1R_FACT10 ((uint32_t)0x00000400) /*!<Filter 10 Active */
+#define CAN_FA1R_FACT11 ((uint32_t)0x00000800) /*!<Filter 11 Active */
+#define CAN_FA1R_FACT12 ((uint32_t)0x00001000) /*!<Filter 12 Active */
+#define CAN_FA1R_FACT13 ((uint32_t)0x00002000) /*!<Filter 13 Active */
+
+/******************* Bit definition for CAN_F0R1 register *******************/
+#define CAN_F0R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F0R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F0R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F0R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F0R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F0R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F0R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F0R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F0R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F0R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F0R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F0R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F0R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F0R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F0R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F0R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F0R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F0R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F0R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F0R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F0R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F0R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F0R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F0R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F0R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F0R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F0R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F0R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F0R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F0R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F0R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F0R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F1R1 register *******************/
+#define CAN_F1R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F1R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F1R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F1R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F1R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F1R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F1R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F1R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F1R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F1R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F1R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F1R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F1R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F1R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F1R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F1R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F1R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F1R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F1R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F1R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F1R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F1R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F1R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F1R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F1R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F1R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F1R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F1R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F1R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F1R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F1R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F1R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F2R1 register *******************/
+#define CAN_F2R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F2R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F2R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F2R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F2R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F2R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F2R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F2R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F2R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F2R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F2R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F2R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F2R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F2R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F2R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F2R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F2R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F2R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F2R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F2R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F2R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F2R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F2R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F2R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F2R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F2R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F2R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F2R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F2R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F2R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F2R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F2R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F3R1 register *******************/
+#define CAN_F3R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F3R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F3R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F3R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F3R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F3R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F3R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F3R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F3R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F3R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F3R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F3R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F3R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F3R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F3R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F3R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F3R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F3R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F3R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F3R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F3R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F3R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F3R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F3R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F3R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F3R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F3R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F3R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F3R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F3R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F3R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F3R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F4R1 register *******************/
+#define CAN_F4R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F4R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F4R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F4R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F4R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F4R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F4R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F4R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F4R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F4R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F4R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F4R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F4R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F4R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F4R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F4R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F4R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F4R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F4R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F4R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F4R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F4R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F4R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F4R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F4R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F4R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F4R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F4R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F4R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F4R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F4R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F4R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F5R1 register *******************/
+#define CAN_F5R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F5R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F5R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F5R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F5R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F5R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F5R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F5R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F5R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F5R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F5R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F5R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F5R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F5R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F5R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F5R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F5R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F5R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F5R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F5R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F5R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F5R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F5R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F5R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F5R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F5R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F5R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F5R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F5R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F5R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F5R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F5R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F6R1 register *******************/
+#define CAN_F6R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F6R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F6R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F6R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F6R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F6R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F6R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F6R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F6R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F6R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F6R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F6R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F6R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F6R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F6R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F6R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F6R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F6R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F6R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F6R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F6R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F6R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F6R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F6R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F6R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F6R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F6R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F6R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F6R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F6R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F6R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F6R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F7R1 register *******************/
+#define CAN_F7R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F7R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F7R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F7R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F7R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F7R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F7R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F7R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F7R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F7R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F7R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F7R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F7R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F7R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F7R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F7R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F7R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F7R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F7R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F7R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F7R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F7R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F7R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F7R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F7R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F7R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F7R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F7R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F7R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F7R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F7R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F7R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F8R1 register *******************/
+#define CAN_F8R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F8R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F8R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F8R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F8R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F8R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F8R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F8R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F8R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F8R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F8R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F8R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F8R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F8R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F8R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F8R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F8R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F8R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F8R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F8R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F8R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F8R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F8R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F8R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F8R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F8R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F8R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F8R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F8R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F8R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F8R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F8R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F9R1 register *******************/
+#define CAN_F9R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F9R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F9R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F9R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F9R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F9R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F9R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F9R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F9R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F9R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F9R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F9R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F9R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F9R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F9R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F9R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F9R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F9R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F9R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F9R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F9R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F9R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F9R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F9R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F9R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F9R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F9R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F9R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F9R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F9R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F9R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F9R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F10R1 register ******************/
+#define CAN_F10R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F10R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F10R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F10R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F10R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F10R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F10R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F10R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F10R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F10R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F10R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F10R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F10R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F10R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F10R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F10R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F10R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F10R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F10R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F10R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F10R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F10R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F10R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F10R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F10R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F10R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F10R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F10R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F10R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F10R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F10R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F10R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F11R1 register ******************/
+#define CAN_F11R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F11R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F11R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F11R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F11R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F11R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F11R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F11R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F11R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F11R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F11R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F11R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F11R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F11R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F11R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F11R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F11R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F11R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F11R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F11R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F11R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F11R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F11R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F11R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F11R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F11R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F11R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F11R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F11R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F11R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F11R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F11R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F12R1 register ******************/
+#define CAN_F12R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F12R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F12R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F12R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F12R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F12R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F12R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F12R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F12R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F12R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F12R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F12R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F12R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F12R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F12R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F12R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F12R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F12R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F12R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F12R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F12R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F12R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F12R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F12R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F12R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F12R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F12R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F12R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F12R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F12R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F12R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F12R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F13R1 register ******************/
+#define CAN_F13R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F13R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F13R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F13R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F13R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F13R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F13R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F13R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F13R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F13R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F13R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F13R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F13R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F13R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F13R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F13R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F13R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F13R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F13R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F13R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F13R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F13R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F13R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F13R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F13R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F13R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F13R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F13R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F13R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F13R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F13R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F13R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F0R2 register *******************/
+#define CAN_F0R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F0R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F0R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F0R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F0R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F0R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F0R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F0R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F0R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F0R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F0R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F0R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F0R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F0R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F0R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F0R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F0R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F0R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F0R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F0R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F0R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F0R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F0R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F0R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F0R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F0R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F0R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F0R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F0R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F0R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F0R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F0R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F1R2 register *******************/
+#define CAN_F1R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F1R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F1R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F1R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F1R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F1R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F1R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F1R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F1R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F1R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F1R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F1R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F1R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F1R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F1R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F1R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F1R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F1R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F1R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F1R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F1R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F1R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F1R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F1R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F1R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F1R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F1R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F1R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F1R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F1R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F1R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F1R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F2R2 register *******************/
+#define CAN_F2R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F2R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F2R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F2R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F2R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F2R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F2R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F2R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F2R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F2R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F2R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F2R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F2R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F2R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F2R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F2R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F2R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F2R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F2R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F2R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F2R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F2R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F2R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F2R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F2R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F2R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F2R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F2R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F2R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F2R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F2R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F2R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F3R2 register *******************/
+#define CAN_F3R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F3R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F3R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F3R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F3R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F3R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F3R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F3R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F3R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F3R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F3R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F3R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F3R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F3R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F3R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F3R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F3R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F3R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F3R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F3R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F3R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F3R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F3R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F3R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F3R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F3R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F3R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F3R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F3R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F3R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F3R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F3R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F4R2 register *******************/
+#define CAN_F4R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F4R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F4R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F4R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F4R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F4R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F4R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F4R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F4R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F4R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F4R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F4R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F4R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F4R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F4R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F4R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F4R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F4R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F4R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F4R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F4R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F4R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F4R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F4R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F4R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F4R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F4R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F4R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F4R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F4R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F4R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F4R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F5R2 register *******************/
+#define CAN_F5R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F5R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F5R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F5R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F5R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F5R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F5R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F5R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F5R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F5R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F5R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F5R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F5R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F5R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F5R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F5R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F5R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F5R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F5R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F5R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F5R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F5R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F5R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F5R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F5R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F5R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F5R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F5R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F5R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F5R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F5R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F5R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F6R2 register *******************/
+#define CAN_F6R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F6R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F6R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F6R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F6R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F6R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F6R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F6R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F6R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F6R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F6R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F6R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F6R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F6R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F6R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F6R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F6R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F6R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F6R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F6R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F6R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F6R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F6R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F6R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F6R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F6R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F6R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F6R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F6R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F6R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F6R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F6R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F7R2 register *******************/
+#define CAN_F7R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F7R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F7R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F7R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F7R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F7R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F7R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F7R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F7R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F7R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F7R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F7R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F7R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F7R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F7R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F7R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F7R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F7R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F7R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F7R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F7R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F7R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F7R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F7R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F7R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F7R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F7R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F7R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F7R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F7R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F7R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F7R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F8R2 register *******************/
+#define CAN_F8R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F8R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F8R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F8R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F8R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F8R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F8R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F8R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F8R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F8R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F8R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F8R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F8R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F8R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F8R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F8R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F8R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F8R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F8R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F8R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F8R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F8R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F8R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F8R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F8R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F8R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F8R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F8R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F8R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F8R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F8R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F8R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F9R2 register *******************/
+#define CAN_F9R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F9R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F9R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F9R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F9R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F9R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F9R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F9R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F9R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F9R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F9R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F9R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F9R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F9R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F9R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F9R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F9R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F9R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F9R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F9R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F9R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F9R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F9R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F9R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F9R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F9R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F9R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F9R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F9R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F9R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F9R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F9R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F10R2 register ******************/
+#define CAN_F10R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F10R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F10R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F10R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F10R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F10R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F10R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F10R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F10R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F10R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F10R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F10R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F10R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F10R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F10R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F10R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F10R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F10R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F10R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F10R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F10R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F10R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F10R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F10R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F10R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F10R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F10R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F10R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F10R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F10R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F10R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F10R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F11R2 register ******************/
+#define CAN_F11R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F11R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F11R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F11R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F11R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F11R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F11R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F11R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F11R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F11R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F11R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F11R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F11R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F11R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F11R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F11R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F11R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F11R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F11R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F11R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F11R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F11R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F11R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F11R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F11R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F11R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F11R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F11R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F11R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F11R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F11R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F11R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F12R2 register ******************/
+#define CAN_F12R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F12R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F12R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F12R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F12R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F12R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F12R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F12R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F12R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F12R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F12R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F12R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F12R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F12R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F12R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F12R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F12R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F12R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F12R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F12R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F12R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F12R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F12R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F12R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F12R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F12R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F12R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F12R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F12R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F12R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F12R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F12R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F13R2 register ******************/
+#define CAN_F13R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F13R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F13R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F13R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F13R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F13R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F13R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F13R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F13R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F13R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F13R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F13R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F13R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F13R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F13R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F13R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F13R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F13R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F13R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F13R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F13R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F13R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F13R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F13R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F13R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F13R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F13R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F13R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F13R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F13R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F13R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F13R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************************************************************************/
+/* */
+/* HDMI-CEC (CEC) */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for CEC_CR register *********************/
+#define CEC_CR_CECEN ((uint32_t)0x00000001) /*!< CEC Enable */
+#define CEC_CR_TXSOM ((uint32_t)0x00000002) /*!< CEC Tx Start Of Message */
+#define CEC_CR_TXEOM ((uint32_t)0x00000004) /*!< CEC Tx End Of Message */
+
+/******************* Bit definition for CEC_CFGR register *******************/
+#define CEC_CFGR_SFT ((uint32_t)0x00000007) /*!< CEC Signal Free Time */
+#define CEC_CFGR_RXTOL ((uint32_t)0x00000008) /*!< CEC Tolerance */
+#define CEC_CFGR_BRESTP ((uint32_t)0x00000010) /*!< CEC Rx Stop */
+#define CEC_CFGR_BREGEN ((uint32_t)0x00000020) /*!< CEC Bit Rising Error generation */
+#define CEC_CFGR_LBPEGEN ((uint32_t)0x00000040) /*!< CEC Long Bit Period Error gener. */
+#define CEC_CFGR_BRDNOGEN ((uint32_t)0x00000080) /*!< CEC Broadcast No Error generation */
+#define CEC_CFGR_SFTOPT ((uint32_t)0x00000100) /*!< CEC Signal Free Time optional */
+#define CEC_CFGR_OAR ((uint32_t)0x7FFF0000) /*!< CEC Own Address */
+#define CEC_CFGR_LSTN ((uint32_t)0x80000000) /*!< CEC Listen mode */
+
+/******************* Bit definition for CEC_TXDR register *******************/
+#define CEC_TXDR_TXD ((uint32_t)0x000000FF) /*!< CEC Tx Data */
+
+/******************* Bit definition for CEC_RXDR register *******************/
+#define CEC_TXDR_RXD ((uint32_t)0x000000FF) /*!< CEC Rx Data */
+
+/******************* Bit definition for CEC_ISR register ********************/
+#define CEC_ISR_RXBR ((uint32_t)0x00000001) /*!< CEC Rx-Byte Received */
+#define CEC_ISR_RXEND ((uint32_t)0x00000002) /*!< CEC End Of Reception */
+#define CEC_ISR_RXOVR ((uint32_t)0x00000004) /*!< CEC Rx-Overrun */
+#define CEC_ISR_BRE ((uint32_t)0x00000008) /*!< CEC Rx Bit Rising Error */
+#define CEC_ISR_SBPE ((uint32_t)0x00000010) /*!< CEC Rx Short Bit period Error */
+#define CEC_ISR_LBPE ((uint32_t)0x00000020) /*!< CEC Rx Long Bit period Error */
+#define CEC_ISR_RXACKE ((uint32_t)0x00000040) /*!< CEC Rx Missing Acknowledge */
+#define CEC_ISR_ARBLST ((uint32_t)0x00000080) /*!< CEC Arbitration Lost */
+#define CEC_ISR_TXBR ((uint32_t)0x00000100) /*!< CEC Tx Byte Request */
+#define CEC_ISR_TXEND ((uint32_t)0x00000200) /*!< CEC End of Transmission */
+#define CEC_ISR_TXUDR ((uint32_t)0x00000400) /*!< CEC Tx-Buffer Underrun */
+#define CEC_ISR_TXERR ((uint32_t)0x00000800) /*!< CEC Tx-Error */
+#define CEC_ISR_TXACKE ((uint32_t)0x00001000) /*!< CEC Tx Missing Acknowledge */
+
+/******************* Bit definition for CEC_IER register ********************/
+#define CEC_IER_RXBRIE ((uint32_t)0x00000001) /*!< CEC Rx-Byte Received IT Enable */
+#define CEC_IER_RXENDIE ((uint32_t)0x00000002) /*!< CEC End Of Reception IT Enable */
+#define CEC_IER_RXOVRIE ((uint32_t)0x00000004) /*!< CEC Rx-Overrun IT Enable */
+#define CEC_IER_BREIE ((uint32_t)0x00000008) /*!< CEC Rx Bit Rising Error IT Enable */
+#define CEC_IER_SBPEIE ((uint32_t)0x00000010) /*!< CEC Rx Short Bit period Error IT Enable*/
+#define CEC_IER_LBPEIE ((uint32_t)0x00000020) /*!< CEC Rx Long Bit period Error IT Enable */
+#define CEC_IER_RXACKEIE ((uint32_t)0x00000040) /*!< CEC Rx Missing Acknowledge IT Enable */
+#define CEC_IER_ARBLSTIE ((uint32_t)0x00000080) /*!< CEC Arbitration Lost IT Enable */
+#define CEC_IER_TXBRIE ((uint32_t)0x00000100) /*!< CEC Tx Byte Request IT Enable */
+#define CEC_IER_TXENDIE ((uint32_t)0x00000200) /*!< CEC End of Transmission IT Enable */
+#define CEC_IER_TXUDRIE ((uint32_t)0x00000400) /*!< CEC Tx-Buffer Underrun IT Enable */
+#define CEC_IER_TXERRIE ((uint32_t)0x00000800) /*!< CEC Tx-Error IT Enable */
+#define CEC_IER_TXACKEIE ((uint32_t)0x00001000) /*!< CEC Tx Missing Acknowledge IT Enable */
+
+
+/******************************************************************************/
+/* */
+/* CRC calculation unit (CRC) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for CRC_DR register *********************/
+#define CRC_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data register bits */
+
+/******************* Bit definition for CRC_IDR register ********************/
+#define CRC_IDR_IDR ((uint8_t)0xFF) /*!< General-purpose 8-bit data register bits */
+
+/******************** Bit definition for CRC_CR register ********************/
+#define CRC_CR_RESET ((uint32_t)0x00000001) /*!< RESET the CRC computation unit bit */
+#define CRC_CR_REV_IN ((uint32_t)0x00000060) /*!< REV_IN Reverse Input Data bits */
+#define CRC_CR_REV_IN_0 ((uint32_t)0x00000020) /*!< REV_IN Bit 0 */
+#define CRC_CR_REV_IN_1 ((uint32_t)0x00000040) /*!< REV_IN Bit 1 */
+#define CRC_CR_REV_OUT ((uint32_t)0x00000080) /*!< REV_OUT Reverse Output Data bits */
+
+/******************* Bit definition for CRC_INIT register *******************/
+#define CRC_INIT_INIT ((uint32_t)0xFFFFFFFF) /*!< Initial CRC value bits */
+
+
+/******************************************************************************/
+/* */
+/* CRS Clock Recovery System */
+/******************************************************************************/
+
+/******************* Bit definition for CRS_CR register *********************/
+#define CRS_CR_SYNCOKIE ((uint32_t)0x00000001) /* SYNC event OK interrupt enable */
+#define CRS_CR_SYNCWARNIE ((uint32_t)0x00000002) /* SYNC warning interrupt enable */
+#define CRS_CR_ERRIE ((uint32_t)0x00000004) /* SYNC error interrupt enable */
+#define CRS_CR_ESYNCIE ((uint32_t)0x00000008) /* Expected SYNC(ESYNCF) interrupt Enable*/
+#define CRS_CR_CEN ((uint32_t)0x00000020) /* Frequency error counter enable */
+#define CRS_CR_AUTOTRIMEN ((uint32_t)0x00000040) /* Automatic trimming enable */
+#define CRS_CR_SWSYNC ((uint32_t)0x00000080) /* A Software SYNC event is generated */
+#define CRS_CR_TRIM ((uint32_t)0x00003F00) /* HSI48 oscillator smooth trimming */
+
+/******************* Bit definition for CRS_CFGR register *********************/
+#define CRS_CFGR_RELOAD ((uint32_t)0x0000FFFF) /* Counter reload value */
+#define CRS_CFGR_FELIM ((uint32_t)0x00FF0000) /* Frequency error limit */
+
+#define CRS_CFGR_SYNCDIV ((uint32_t)0x07000000) /* SYNC divider */
+#define CRS_CFGR_SYNCDIV_0 ((uint32_t)0x01000000) /* Bit 0 */
+#define CRS_CFGR_SYNCDIV_1 ((uint32_t)0x02000000) /* Bit 1 */
+#define CRS_CFGR_SYNCDIV_2 ((uint32_t)0x04000000) /* Bit 2 */
+
+#define CRS_CFGR_SYNCSRC ((uint32_t)0x30000000) /* SYNC signal source selection */
+#define CRS_CFGR_SYNCSRC_0 ((uint32_t)0x10000000) /* Bit 0 */
+#define CRS_CFGR_SYNCSRC_1 ((uint32_t)0x20000000) /* Bit 1 */
+
+#define CRS_CFGR_SYNCPOL ((uint32_t)0x80000000) /* SYNC polarity selection */
+
+/******************* Bit definition for CRS_ISR register *********************/
+#define CRS_ISR_SYNCOKF ((uint32_t)0x00000001) /* SYNC event OK flag */
+#define CRS_ISR_SYNCWARNF ((uint32_t)0x00000002) /* SYNC warning */
+#define CRS_ISR_ERRF ((uint32_t)0x00000004) /* SYNC error flag */
+#define CRS_ISR_ESYNCF ((uint32_t)0x00000008) /* Expected SYNC flag */
+#define CRS_ISR_SYNCERR ((uint32_t)0x00000100) /* SYNC error */
+#define CRS_ISR_SYNCMISS ((uint32_t)0x00000200) /* SYNC missed */
+#define CRS_ISR_TRIMOVF ((uint32_t)0x00000400) /* Trimming overflow or underflow */
+#define CRS_ISR_FEDIR ((uint32_t)0x00008000) /* Frequency error direction */
+#define CRS_ISR_FECAP ((uint32_t)0xFFFF0000) /* Frequency error capture */
+
+/******************* Bit definition for CRS_ICR register *********************/
+#define CRS_ICR_SYNCOKC ((uint32_t)0x00000001) /* SYNC event OK clear flag */
+#define CRS_ICR_SYNCWARNC ((uint32_t)0x00000002) /* SYNC warning clear flag */
+#define CRS_ICR_ERRC ((uint32_t)0x00000004) /* Error clear flag */
+#define CRS_ICR_ESYNCC ((uint32_t)0x00000008) /* Expected SYNC clear flag */
+
+
+/******************************************************************************/
+/* */
+/* Debug MCU (DBGMCU) */
+/* */
+/******************************************************************************/
+
+/**************** Bit definition for DBGMCU_IDCODE register *****************/
+#define DBGMCU_IDCODE_DEV_ID ((uint32_t)0x00000FFF) /*!< Device Identifier */
+
+#define DBGMCU_IDCODE_REV_ID ((uint32_t)0xFFFF0000) /*!< REV_ID[15:0] bits (Revision Identifier) */
+#define DBGMCU_IDCODE_REV_ID_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define DBGMCU_IDCODE_REV_ID_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define DBGMCU_IDCODE_REV_ID_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define DBGMCU_IDCODE_REV_ID_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+#define DBGMCU_IDCODE_REV_ID_4 ((uint32_t)0x00100000) /*!< Bit 4 */
+#define DBGMCU_IDCODE_REV_ID_5 ((uint32_t)0x00200000) /*!< Bit 5 */
+#define DBGMCU_IDCODE_REV_ID_6 ((uint32_t)0x00400000) /*!< Bit 6 */
+#define DBGMCU_IDCODE_REV_ID_7 ((uint32_t)0x00800000) /*!< Bit 7 */
+#define DBGMCU_IDCODE_REV_ID_8 ((uint32_t)0x01000000) /*!< Bit 8 */
+#define DBGMCU_IDCODE_REV_ID_9 ((uint32_t)0x02000000) /*!< Bit 9 */
+#define DBGMCU_IDCODE_REV_ID_10 ((uint32_t)0x04000000) /*!< Bit 10 */
+#define DBGMCU_IDCODE_REV_ID_11 ((uint32_t)0x08000000) /*!< Bit 11 */
+#define DBGMCU_IDCODE_REV_ID_12 ((uint32_t)0x10000000) /*!< Bit 12 */
+#define DBGMCU_IDCODE_REV_ID_13 ((uint32_t)0x20000000) /*!< Bit 13 */
+#define DBGMCU_IDCODE_REV_ID_14 ((uint32_t)0x40000000) /*!< Bit 14 */
+#define DBGMCU_IDCODE_REV_ID_15 ((uint32_t)0x80000000) /*!< Bit 15 */
+
+/****************** Bit definition for DBGMCU_CR register *******************/
+#define DBGMCU_CR_DBG_STOP ((uint32_t)0x00000002) /*!< Debug Stop Mode */
+#define DBGMCU_CR_DBG_STANDBY ((uint32_t)0x00000004) /*!< Debug Standby mode */
+
+/****************** Bit definition for DBGMCU_APB1_FZ register **************/
+#define DBGMCU_APB1_FZ_DBG_TIM2_STOP ((uint32_t)0x00000001) /*!< TIM2 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM3_STOP ((uint32_t)0x00000002) /*!< TIM3 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM14_STOP ((uint32_t)0x00000100) /*!< TIM14 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_RTC_STOP ((uint32_t)0x00000400) /*!< RTC Calendar frozen when core is halted */
+#define DBGMCU_APB1_FZ_DBG_WWDG_STOP ((uint32_t)0x00000800) /*!< Debug Window Watchdog stopped when Core is halted */
+#define DBGMCU_APB1_FZ_DBG_IWDG_STOP ((uint32_t)0x00001000) /*!< Debug Independent Watchdog stopped when Core is halted */
+#define DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00200000) /*!< I2C1 SMBUS timeout mode stopped when Core is halted */
+#define DBGMCU_APB1_FZ_DBG_CAN_STOP ((uint32_t)0x02000000) /*!< CAN debug stopped when Core is halted */
+
+/****************** Bit definition for DBGMCU_APB2_FZ register **************/
+#define DBGMCU_APB2_FZ_DBG_TIM1_STOP ((uint32_t)0x00000800) /*!< TIM1 counter stopped when core is halted */
+#define DBGMCU_APB2_FZ_DBG_TIM16_STOP ((uint32_t)0x00020000) /*!< TIM16 counter stopped when core is halted */
+#define DBGMCU_APB2_FZ_DBG_TIM17_STOP ((uint32_t)0x00040000) /*!< TIM17 counter stopped when core is halted */
+
+/******************************************************************************/
+/* */
+/* DMA Controller (DMA) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for DMA_ISR register ********************/
+#define DMA_ISR_GIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt flag */
+#define DMA_ISR_TCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete flag */
+#define DMA_ISR_HTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer flag */
+#define DMA_ISR_TEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error flag */
+#define DMA_ISR_GIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt flag */
+#define DMA_ISR_TCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete flag */
+#define DMA_ISR_HTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer flag */
+#define DMA_ISR_TEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error flag */
+#define DMA_ISR_GIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt flag */
+#define DMA_ISR_TCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete flag */
+#define DMA_ISR_HTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer flag */
+#define DMA_ISR_TEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error flag */
+#define DMA_ISR_GIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt flag */
+#define DMA_ISR_TCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete flag */
+#define DMA_ISR_HTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer flag */
+#define DMA_ISR_TEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error flag */
+#define DMA_ISR_GIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt flag */
+#define DMA_ISR_TCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete flag */
+#define DMA_ISR_HTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer flag */
+#define DMA_ISR_TEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error flag */
+#define DMA_ISR_GIF6 ((uint32_t)0x00100000) /*!< Channel 6 Global interrupt flag */
+#define DMA_ISR_TCIF6 ((uint32_t)0x00200000) /*!< Channel 6 Transfer Complete flag */
+#define DMA_ISR_HTIF6 ((uint32_t)0x00400000) /*!< Channel 6 Half Transfer flag */
+#define DMA_ISR_TEIF6 ((uint32_t)0x00800000) /*!< Channel 6 Transfer Error flag */
+#define DMA_ISR_GIF7 ((uint32_t)0x01000000) /*!< Channel 7 Global interrupt flag */
+#define DMA_ISR_TCIF7 ((uint32_t)0x02000000) /*!< Channel 7 Transfer Complete flag */
+#define DMA_ISR_HTIF7 ((uint32_t)0x04000000) /*!< Channel 7 Half Transfer flag */
+#define DMA_ISR_TEIF7 ((uint32_t)0x08000000) /*!< Channel 7 Transfer Error flag */
+
+/******************* Bit definition for DMA_IFCR register *******************/
+#define DMA_IFCR_CGIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt clear */
+#define DMA_IFCR_CTCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete clear */
+#define DMA_IFCR_CHTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer clear */
+#define DMA_IFCR_CTEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error clear */
+#define DMA_IFCR_CGIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt clear */
+#define DMA_IFCR_CTCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete clear */
+#define DMA_IFCR_CHTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer clear */
+#define DMA_IFCR_CTEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error clear */
+#define DMA_IFCR_CGIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt clear */
+#define DMA_IFCR_CTCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete clear */
+#define DMA_IFCR_CHTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer clear */
+#define DMA_IFCR_CTEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error clear */
+#define DMA_IFCR_CGIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt clear */
+#define DMA_IFCR_CTCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete clear */
+#define DMA_IFCR_CHTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer clear */
+#define DMA_IFCR_CTEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error clear */
+#define DMA_IFCR_CGIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt clear */
+#define DMA_IFCR_CTCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete clear */
+#define DMA_IFCR_CHTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer clear */
+#define DMA_IFCR_CTEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error clear */
+#define DMA_IFCR_CGIF6 ((uint32_t)0x00100000) /*!< Channel 6 Global interrupt clear */
+#define DMA_IFCR_CTCIF6 ((uint32_t)0x00200000) /*!< Channel 6 Transfer Complete clear */
+#define DMA_IFCR_CHTIF6 ((uint32_t)0x00400000) /*!< Channel 6 Half Transfer clear */
+#define DMA_IFCR_CTEIF6 ((uint32_t)0x00800000) /*!< Channel 6 Transfer Error clear */
+#define DMA_IFCR_CGIF7 ((uint32_t)0x01000000) /*!< Channel 7 Global interrupt clear */
+#define DMA_IFCR_CTCIF7 ((uint32_t)0x02000000) /*!< Channel 7 Transfer Complete clear */
+#define DMA_IFCR_CHTIF7 ((uint32_t)0x04000000) /*!< Channel 7 Half Transfer clear */
+#define DMA_IFCR_CTEIF7 ((uint32_t)0x08000000) /*!< Channel 7 Transfer Error clear */
+
+/******************* Bit definition for DMA_CCR register ********************/
+#define DMA_CCR_EN ((uint32_t)0x00000001) /*!< Channel enable */
+#define DMA_CCR_TCIE ((uint32_t)0x00000002) /*!< Transfer complete interrupt enable */
+#define DMA_CCR_HTIE ((uint32_t)0x00000004) /*!< Half Transfer interrupt enable */
+#define DMA_CCR_TEIE ((uint32_t)0x00000008) /*!< Transfer error interrupt enable */
+#define DMA_CCR_DIR ((uint32_t)0x00000010) /*!< Data transfer direction */
+#define DMA_CCR_CIRC ((uint32_t)0x00000020) /*!< Circular mode */
+#define DMA_CCR_PINC ((uint32_t)0x00000040) /*!< Peripheral increment mode */
+#define DMA_CCR_MINC ((uint32_t)0x00000080) /*!< Memory increment mode */
+
+#define DMA_CCR_PSIZE ((uint32_t)0x00000300) /*!< PSIZE[1:0] bits (Peripheral size) */
+#define DMA_CCR_PSIZE_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define DMA_CCR_PSIZE_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+
+#define DMA_CCR_MSIZE ((uint32_t)0x00000C00) /*!< MSIZE[1:0] bits (Memory size) */
+#define DMA_CCR_MSIZE_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define DMA_CCR_MSIZE_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+
+#define DMA_CCR_PL ((uint32_t)0x00003000) /*!< PL[1:0] bits(Channel Priority level)*/
+#define DMA_CCR_PL_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define DMA_CCR_PL_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+
+#define DMA_CCR_MEM2MEM ((uint32_t)0x00004000) /*!< Memory to memory mode */
+
+/****************** Bit definition for DMA_CNDTR register *******************/
+#define DMA_CNDTR_NDT ((uint32_t)0x0000FFFF) /*!< Number of data to Transfer */
+
+/****************** Bit definition for DMA_CPAR register ********************/
+#define DMA_CPAR_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */
+
+/****************** Bit definition for DMA_CMAR register ********************/
+#define DMA_CMAR_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */
+
+/******************************************************************************/
+/* */
+/* External Interrupt/Event Controller (EXTI) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for EXTI_IMR register *******************/
+#define EXTI_IMR_MR0 ((uint32_t)0x00000001) /*!< Interrupt Mask on line 0 */
+#define EXTI_IMR_MR1 ((uint32_t)0x00000002) /*!< Interrupt Mask on line 1 */
+#define EXTI_IMR_MR2 ((uint32_t)0x00000004) /*!< Interrupt Mask on line 2 */
+#define EXTI_IMR_MR3 ((uint32_t)0x00000008) /*!< Interrupt Mask on line 3 */
+#define EXTI_IMR_MR4 ((uint32_t)0x00000010) /*!< Interrupt Mask on line 4 */
+#define EXTI_IMR_MR5 ((uint32_t)0x00000020) /*!< Interrupt Mask on line 5 */
+#define EXTI_IMR_MR6 ((uint32_t)0x00000040) /*!< Interrupt Mask on line 6 */
+#define EXTI_IMR_MR7 ((uint32_t)0x00000080) /*!< Interrupt Mask on line 7 */
+#define EXTI_IMR_MR8 ((uint32_t)0x00000100) /*!< Interrupt Mask on line 8 */
+#define EXTI_IMR_MR9 ((uint32_t)0x00000200) /*!< Interrupt Mask on line 9 */
+#define EXTI_IMR_MR10 ((uint32_t)0x00000400) /*!< Interrupt Mask on line 10 */
+#define EXTI_IMR_MR11 ((uint32_t)0x00000800) /*!< Interrupt Mask on line 11 */
+#define EXTI_IMR_MR12 ((uint32_t)0x00001000) /*!< Interrupt Mask on line 12 */
+#define EXTI_IMR_MR13 ((uint32_t)0x00002000) /*!< Interrupt Mask on line 13 */
+#define EXTI_IMR_MR14 ((uint32_t)0x00004000) /*!< Interrupt Mask on line 14 */
+#define EXTI_IMR_MR15 ((uint32_t)0x00008000) /*!< Interrupt Mask on line 15 */
+#define EXTI_IMR_MR16 ((uint32_t)0x00010000) /*!< Interrupt Mask on line 16 */
+#define EXTI_IMR_MR17 ((uint32_t)0x00020000) /*!< Interrupt Mask on line 17 */
+#define EXTI_IMR_MR19 ((uint32_t)0x00080000) /*!< Interrupt Mask on line 19 */
+#define EXTI_IMR_MR21 ((uint32_t)0x00200000) /*!< Interrupt Mask on line 21 */
+#define EXTI_IMR_MR22 ((uint32_t)0x00400000) /*!< Interrupt Mask on line 22 */
+#define EXTI_IMR_MR23 ((uint32_t)0x00800000) /*!< Interrupt Mask on line 23 */
+#define EXTI_IMR_MR25 ((uint32_t)0x02000000) /*!< Interrupt Mask on line 25 */
+#define EXTI_IMR_MR27 ((uint32_t)0x08000000) /*!< Interrupt Mask on line 27 */
+
+/****************** Bit definition for EXTI_EMR register ********************/
+#define EXTI_EMR_MR0 ((uint32_t)0x00000001) /*!< Event Mask on line 0 */
+#define EXTI_EMR_MR1 ((uint32_t)0x00000002) /*!< Event Mask on line 1 */
+#define EXTI_EMR_MR2 ((uint32_t)0x00000004) /*!< Event Mask on line 2 */
+#define EXTI_EMR_MR3 ((uint32_t)0x00000008) /*!< Event Mask on line 3 */
+#define EXTI_EMR_MR4 ((uint32_t)0x00000010) /*!< Event Mask on line 4 */
+#define EXTI_EMR_MR5 ((uint32_t)0x00000020) /*!< Event Mask on line 5 */
+#define EXTI_EMR_MR6 ((uint32_t)0x00000040) /*!< Event Mask on line 6 */
+#define EXTI_EMR_MR7 ((uint32_t)0x00000080) /*!< Event Mask on line 7 */
+#define EXTI_EMR_MR8 ((uint32_t)0x00000100) /*!< Event Mask on line 8 */
+#define EXTI_EMR_MR9 ((uint32_t)0x00000200) /*!< Event Mask on line 9 */
+#define EXTI_EMR_MR10 ((uint32_t)0x00000400) /*!< Event Mask on line 10 */
+#define EXTI_EMR_MR11 ((uint32_t)0x00000800) /*!< Event Mask on line 11 */
+#define EXTI_EMR_MR12 ((uint32_t)0x00001000) /*!< Event Mask on line 12 */
+#define EXTI_EMR_MR13 ((uint32_t)0x00002000) /*!< Event Mask on line 13 */
+#define EXTI_EMR_MR14 ((uint32_t)0x00004000) /*!< Event Mask on line 14 */
+#define EXTI_EMR_MR15 ((uint32_t)0x00008000) /*!< Event Mask on line 15 */
+#define EXTI_EMR_MR16 ((uint32_t)0x00010000) /*!< Event Mask on line 16 */
+#define EXTI_EMR_MR17 ((uint32_t)0x00020000) /*!< Event Mask on line 17 */
+#define EXTI_EMR_MR19 ((uint32_t)0x00080000) /*!< Event Mask on line 19 */
+#define EXTI_EMR_MR21 ((uint32_t)0x00200000) /*!< Event Mask on line 21 */
+#define EXTI_EMR_MR22 ((uint32_t)0x00400000) /*!< Event Mask on line 22 */
+#define EXTI_EMR_MR23 ((uint32_t)0x00800000) /*!< Event Mask on line 23 */
+#define EXTI_EMR_MR25 ((uint32_t)0x02000000) /*!< Event Mask on line 25 */
+#define EXTI_EMR_MR27 ((uint32_t)0x08000000) /*!< Event Mask on line 27 */
+
+/******************* Bit definition for EXTI_RTSR register ******************/
+#define EXTI_RTSR_TR0 ((uint32_t)0x00000001) /*!< Rising trigger event configuration bit of line 0 */
+#define EXTI_RTSR_TR1 ((uint32_t)0x00000002) /*!< Rising trigger event configuration bit of line 1 */
+#define EXTI_RTSR_TR2 ((uint32_t)0x00000004) /*!< Rising trigger event configuration bit of line 2 */
+#define EXTI_RTSR_TR3 ((uint32_t)0x00000008) /*!< Rising trigger event configuration bit of line 3 */
+#define EXTI_RTSR_TR4 ((uint32_t)0x00000010) /*!< Rising trigger event configuration bit of line 4 */
+#define EXTI_RTSR_TR5 ((uint32_t)0x00000020) /*!< Rising trigger event configuration bit of line 5 */
+#define EXTI_RTSR_TR6 ((uint32_t)0x00000040) /*!< Rising trigger event configuration bit of line 6 */
+#define EXTI_RTSR_TR7 ((uint32_t)0x00000080) /*!< Rising trigger event configuration bit of line 7 */
+#define EXTI_RTSR_TR8 ((uint32_t)0x00000100) /*!< Rising trigger event configuration bit of line 8 */
+#define EXTI_RTSR_TR9 ((uint32_t)0x00000200) /*!< Rising trigger event configuration bit of line 9 */
+#define EXTI_RTSR_TR10 ((uint32_t)0x00000400) /*!< Rising trigger event configuration bit of line 10 */
+#define EXTI_RTSR_TR11 ((uint32_t)0x00000800) /*!< Rising trigger event configuration bit of line 11 */
+#define EXTI_RTSR_TR12 ((uint32_t)0x00001000) /*!< Rising trigger event configuration bit of line 12 */
+#define EXTI_RTSR_TR13 ((uint32_t)0x00002000) /*!< Rising trigger event configuration bit of line 13 */
+#define EXTI_RTSR_TR14 ((uint32_t)0x00004000) /*!< Rising trigger event configuration bit of line 14 */
+#define EXTI_RTSR_TR15 ((uint32_t)0x00008000) /*!< Rising trigger event configuration bit of line 15 */
+#define EXTI_RTSR_TR16 ((uint32_t)0x00010000) /*!< Rising trigger event configuration bit of line 16 */
+#define EXTI_RTSR_TR17 ((uint32_t)0x00020000) /*!< Rising trigger event configuration bit of line 17 */
+#define EXTI_RTSR_TR19 ((uint32_t)0x00080000) /*!< Rising trigger event configuration bit of line 19 */
+
+/******************* Bit definition for EXTI_FTSR register *******************/
+#define EXTI_FTSR_TR0 ((uint32_t)0x00000001) /*!< Falling trigger event configuration bit of line 0 */
+#define EXTI_FTSR_TR1 ((uint32_t)0x00000002) /*!< Falling trigger event configuration bit of line 1 */
+#define EXTI_FTSR_TR2 ((uint32_t)0x00000004) /*!< Falling trigger event configuration bit of line 2 */
+#define EXTI_FTSR_TR3 ((uint32_t)0x00000008) /*!< Falling trigger event configuration bit of line 3 */
+#define EXTI_FTSR_TR4 ((uint32_t)0x00000010) /*!< Falling trigger event configuration bit of line 4 */
+#define EXTI_FTSR_TR5 ((uint32_t)0x00000020) /*!< Falling trigger event configuration bit of line 5 */
+#define EXTI_FTSR_TR6 ((uint32_t)0x00000040) /*!< Falling trigger event configuration bit of line 6 */
+#define EXTI_FTSR_TR7 ((uint32_t)0x00000080) /*!< Falling trigger event configuration bit of line 7 */
+#define EXTI_FTSR_TR8 ((uint32_t)0x00000100) /*!< Falling trigger event configuration bit of line 8 */
+#define EXTI_FTSR_TR9 ((uint32_t)0x00000200) /*!< Falling trigger event configuration bit of line 9 */
+#define EXTI_FTSR_TR10 ((uint32_t)0x00000400) /*!< Falling trigger event configuration bit of line 10 */
+#define EXTI_FTSR_TR11 ((uint32_t)0x00000800) /*!< Falling trigger event configuration bit of line 11 */
+#define EXTI_FTSR_TR12 ((uint32_t)0x00001000) /*!< Falling trigger event configuration bit of line 12 */
+#define EXTI_FTSR_TR13 ((uint32_t)0x00002000) /*!< Falling trigger event configuration bit of line 13 */
+#define EXTI_FTSR_TR14 ((uint32_t)0x00004000) /*!< Falling trigger event configuration bit of line 14 */
+#define EXTI_FTSR_TR15 ((uint32_t)0x00008000) /*!< Falling trigger event configuration bit of line 15 */
+#define EXTI_FTSR_TR16 ((uint32_t)0x00010000) /*!< Falling trigger event configuration bit of line 16 */
+#define EXTI_FTSR_TR17 ((uint32_t)0x00020000) /*!< Falling trigger event configuration bit of line 17 */
+#define EXTI_FTSR_TR19 ((uint32_t)0x00080000) /*!< Falling trigger event configuration bit of line 19 */
+
+/******************* Bit definition for EXTI_SWIER register *******************/
+#define EXTI_SWIER_SWIER0 ((uint32_t)0x00000001) /*!< Software Interrupt on line 0 */
+#define EXTI_SWIER_SWIER1 ((uint32_t)0x00000002) /*!< Software Interrupt on line 1 */
+#define EXTI_SWIER_SWIER2 ((uint32_t)0x00000004) /*!< Software Interrupt on line 2 */
+#define EXTI_SWIER_SWIER3 ((uint32_t)0x00000008) /*!< Software Interrupt on line 3 */
+#define EXTI_SWIER_SWIER4 ((uint32_t)0x00000010) /*!< Software Interrupt on line 4 */
+#define EXTI_SWIER_SWIER5 ((uint32_t)0x00000020) /*!< Software Interrupt on line 5 */
+#define EXTI_SWIER_SWIER6 ((uint32_t)0x00000040) /*!< Software Interrupt on line 6 */
+#define EXTI_SWIER_SWIER7 ((uint32_t)0x00000080) /*!< Software Interrupt on line 7 */
+#define EXTI_SWIER_SWIER8 ((uint32_t)0x00000100) /*!< Software Interrupt on line 8 */
+#define EXTI_SWIER_SWIER9 ((uint32_t)0x00000200) /*!< Software Interrupt on line 9 */
+#define EXTI_SWIER_SWIER10 ((uint32_t)0x00000400) /*!< Software Interrupt on line 10 */
+#define EXTI_SWIER_SWIER11 ((uint32_t)0x00000800) /*!< Software Interrupt on line 11 */
+#define EXTI_SWIER_SWIER12 ((uint32_t)0x00001000) /*!< Software Interrupt on line 12 */
+#define EXTI_SWIER_SWIER13 ((uint32_t)0x00002000) /*!< Software Interrupt on line 13 */
+#define EXTI_SWIER_SWIER14 ((uint32_t)0x00004000) /*!< Software Interrupt on line 14 */
+#define EXTI_SWIER_SWIER15 ((uint32_t)0x00008000) /*!< Software Interrupt on line 15 */
+#define EXTI_SWIER_SWIER16 ((uint32_t)0x00010000) /*!< Software Interrupt on line 16 */
+#define EXTI_SWIER_SWIER17 ((uint32_t)0x00020000) /*!< Software Interrupt on line 17 */
+#define EXTI_SWIER_SWIER19 ((uint32_t)0x00080000) /*!< Software Interrupt on line 19 */
+
+/****************** Bit definition for EXTI_PR register *********************/
+#define EXTI_PR_PR0 ((uint32_t)0x00000001) /*!< Pending bit 0 */
+#define EXTI_PR_PR1 ((uint32_t)0x00000002) /*!< Pending bit 1 */
+#define EXTI_PR_PR2 ((uint32_t)0x00000004) /*!< Pending bit 2 */
+#define EXTI_PR_PR3 ((uint32_t)0x00000008) /*!< Pending bit 3 */
+#define EXTI_PR_PR4 ((uint32_t)0x00000010) /*!< Pending bit 4 */
+#define EXTI_PR_PR5 ((uint32_t)0x00000020) /*!< Pending bit 5 */
+#define EXTI_PR_PR6 ((uint32_t)0x00000040) /*!< Pending bit 6 */
+#define EXTI_PR_PR7 ((uint32_t)0x00000080) /*!< Pending bit 7 */
+#define EXTI_PR_PR8 ((uint32_t)0x00000100) /*!< Pending bit 8 */
+#define EXTI_PR_PR9 ((uint32_t)0x00000200) /*!< Pending bit 9 */
+#define EXTI_PR_PR10 ((uint32_t)0x00000400) /*!< Pending bit 10 */
+#define EXTI_PR_PR11 ((uint32_t)0x00000800) /*!< Pending bit 11 */
+#define EXTI_PR_PR12 ((uint32_t)0x00001000) /*!< Pending bit 12 */
+#define EXTI_PR_PR13 ((uint32_t)0x00002000) /*!< Pending bit 13 */
+#define EXTI_PR_PR14 ((uint32_t)0x00004000) /*!< Pending bit 14 */
+#define EXTI_PR_PR15 ((uint32_t)0x00008000) /*!< Pending bit 15 */
+#define EXTI_PR_PR16 ((uint32_t)0x00010000) /*!< Pending bit 16 */
+#define EXTI_PR_PR17 ((uint32_t)0x00020000) /*!< Pending bit 17 */
+#define EXTI_PR_PR19 ((uint32_t)0x00080000) /*!< Pending bit 19 */
+
+/******************************************************************************/
+/* */
+/* FLASH and Option Bytes Registers */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for FLASH_ACR register ******************/
+#define FLASH_ACR_LATENCY ((uint32_t)0x00000001) /*!< LATENCY bit (Latency) */
+
+#define FLASH_ACR_PRFTBE ((uint32_t)0x00000010) /*!< Prefetch Buffer Enable */
+#define FLASH_ACR_PRFTBS ((uint32_t)0x00000020) /*!< Prefetch Buffer Status */
+
+/****************** Bit definition for FLASH_KEYR register ******************/
+#define FLASH_KEYR_FKEYR ((uint32_t)0xFFFFFFFF) /*!< FPEC Key */
+
+/***************** Bit definition for FLASH_OPTKEYR register ****************/
+#define FLASH_OPTKEYR_OPTKEYR ((uint32_t)0xFFFFFFFF) /*!< Option Byte Key */
+
+/****************** FLASH Keys **********************************************/
+#define FLASH_FKEY1 ((uint32_t)0x45670123) /*!< Flash program erase key1 */
+#define FLASH_FKEY2 ((uint32_t)0xCDEF89AB) /*!< Flash program erase key2: used with FLASH_PEKEY1
+ to unlock the write access to the FPEC. */
+
+#define FLASH_OPTKEY1 ((uint32_t)0x45670123) /*!< Flash option key1 */
+#define FLASH_OPTKEY2 ((uint32_t)0xCDEF89AB) /*!< Flash option key2: used with FLASH_OPTKEY1 to
+ unlock the write access to the option byte block */
+
+/****************** Bit definition for FLASH_SR register *******************/
+#define FLASH_SR_BSY ((uint32_t)0x00000001) /*!< Busy */
+#define FLASH_SR_PGERR ((uint32_t)0x00000004) /*!< Programming Error */
+#define FLASH_SR_WRPRTERR ((uint32_t)0x00000010) /*!< Write Protection Error */
+#define FLASH_SR_EOP ((uint32_t)0x00000020) /*!< End of operation */
+#define FLASH_SR_WRPERR FLASH_SR_WRPRTERR /*!< Legacy of Write Protection Error */
+
+/******************* Bit definition for FLASH_CR register *******************/
+#define FLASH_CR_PG ((uint32_t)0x00000001) /*!< Programming */
+#define FLASH_CR_PER ((uint32_t)0x00000002) /*!< Page Erase */
+#define FLASH_CR_MER ((uint32_t)0x00000004) /*!< Mass Erase */
+#define FLASH_CR_OPTPG ((uint32_t)0x00000010) /*!< Option Byte Programming */
+#define FLASH_CR_OPTER ((uint32_t)0x00000020) /*!< Option Byte Erase */
+#define FLASH_CR_STRT ((uint32_t)0x00000040) /*!< Start */
+#define FLASH_CR_LOCK ((uint32_t)0x00000080) /*!< Lock */
+#define FLASH_CR_OPTWRE ((uint32_t)0x00000200) /*!< Option Bytes Write Enable */
+#define FLASH_CR_ERRIE ((uint32_t)0x00000400) /*!< Error Interrupt Enable */
+#define FLASH_CR_EOPIE ((uint32_t)0x00001000) /*!< End of operation interrupt enable */
+#define FLASH_CR_OBL_LAUNCH ((uint32_t)0x00002000) /*!< Option Bytes Loader Launch */
+
+/******************* Bit definition for FLASH_AR register *******************/
+#define FLASH_AR_FAR ((uint32_t)0xFFFFFFFF) /*!< Flash Address */
+
+/****************** Bit definition for FLASH_OBR register *******************/
+#define FLASH_OBR_OPTERR ((uint32_t)0x00000001) /*!< Option Byte Error */
+#define FLASH_OBR_RDPRT1 ((uint32_t)0x00000002) /*!< Read protection Level 1 */
+#define FLASH_OBR_RDPRT2 ((uint32_t)0x00000004) /*!< Read protection Level 2 */
+
+#define FLASH_OBR_USER ((uint32_t)0x00003700) /*!< User Option Bytes */
+#define FLASH_OBR_IWDG_SW ((uint32_t)0x00000100) /*!< IWDG SW */
+#define FLASH_OBR_nRST_STOP ((uint32_t)0x00000200) /*!< nRST_STOP */
+#define FLASH_OBR_nRST_STDBY ((uint32_t)0x00000400) /*!< nRST_STDBY */
+#define FLASH_OBR_nBOOT1 ((uint32_t)0x00001000) /*!< nBOOT1 */
+#define FLASH_OBR_VDDA_MONITOR ((uint32_t)0x00002000) /*!< VDDA power supply supervisor */
+
+/* Old BOOT1 bit definition, maintained for legacy purpose */
+#define FLASH_OBR_BOOT1 FLASH_OBR_nBOOT1
+
+/* Old OBR_VDDA bit definition, maintained for legacy purpose */
+#define FLASH_OBR_VDDA_ANALOG FLASH_OBR_VDDA_MONITOR
+
+/****************** Bit definition for FLASH_WRPR register ******************/
+#define FLASH_WRPR_WRP ((uint32_t)0x0000FFFF) /*!< Write Protect */
+
+/*----------------------------------------------------------------------------*/
+
+/****************** Bit definition for OB_RDP register **********************/
+#define OB_RDP_RDP ((uint32_t)0x000000FF) /*!< Read protection option byte */
+#define OB_RDP_nRDP ((uint32_t)0x0000FF00) /*!< Read protection complemented option byte */
+
+/****************** Bit definition for OB_USER register *********************/
+#define OB_USER_USER ((uint32_t)0x00FF0000) /*!< User option byte */
+#define OB_USER_nUSER ((uint32_t)0xFF000000) /*!< User complemented option byte */
+
+/****************** Bit definition for OB_WRP0 register *********************/
+#define OB_WRP0_WRP0 ((uint32_t)0x000000FF) /*!< Flash memory write protection option bytes */
+#define OB_WRP0_nWRP0 ((uint32_t)0x0000FF00) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for OB_WRP1 register *********************/
+#define OB_WRP1_WRP1 ((uint32_t)0x00FF0000) /*!< Flash memory write protection option bytes */
+#define OB_WRP1_nWRP1 ((uint32_t)0xFF000000) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for OB_WRP2 register *********************/
+#define OB_WRP2_WRP2 ((uint32_t)0x000000FF) /*!< Flash memory write protection option bytes */
+#define OB_WRP2_nWRP2 ((uint32_t)0x0000FF00) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for OB_WRP3 register *********************/
+#define OB_WRP3_WRP3 ((uint32_t)0x00FF0000) /*!< Flash memory write protection option bytes */
+#define OB_WRP3_nWRP3 ((uint32_t)0xFF000000) /*!< Flash memory write protection complemented option bytes */
+
+/******************************************************************************/
+/* */
+/* General Purpose IOs (GPIO) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for GPIO_MODER register *****************/
+#define GPIO_MODER_MODER0 ((uint32_t)0x00000003)
+#define GPIO_MODER_MODER0_0 ((uint32_t)0x00000001)
+#define GPIO_MODER_MODER0_1 ((uint32_t)0x00000002)
+#define GPIO_MODER_MODER1 ((uint32_t)0x0000000C)
+#define GPIO_MODER_MODER1_0 ((uint32_t)0x00000004)
+#define GPIO_MODER_MODER1_1 ((uint32_t)0x00000008)
+#define GPIO_MODER_MODER2 ((uint32_t)0x00000030)
+#define GPIO_MODER_MODER2_0 ((uint32_t)0x00000010)
+#define GPIO_MODER_MODER2_1 ((uint32_t)0x00000020)
+#define GPIO_MODER_MODER3 ((uint32_t)0x000000C0)
+#define GPIO_MODER_MODER3_0 ((uint32_t)0x00000040)
+#define GPIO_MODER_MODER3_1 ((uint32_t)0x00000080)
+#define GPIO_MODER_MODER4 ((uint32_t)0x00000300)
+#define GPIO_MODER_MODER4_0 ((uint32_t)0x00000100)
+#define GPIO_MODER_MODER4_1 ((uint32_t)0x00000200)
+#define GPIO_MODER_MODER5 ((uint32_t)0x00000C00)
+#define GPIO_MODER_MODER5_0 ((uint32_t)0x00000400)
+#define GPIO_MODER_MODER5_1 ((uint32_t)0x00000800)
+#define GPIO_MODER_MODER6 ((uint32_t)0x00003000)
+#define GPIO_MODER_MODER6_0 ((uint32_t)0x00001000)
+#define GPIO_MODER_MODER6_1 ((uint32_t)0x00002000)
+#define GPIO_MODER_MODER7 ((uint32_t)0x0000C000)
+#define GPIO_MODER_MODER7_0 ((uint32_t)0x00004000)
+#define GPIO_MODER_MODER7_1 ((uint32_t)0x00008000)
+#define GPIO_MODER_MODER8 ((uint32_t)0x00030000)
+#define GPIO_MODER_MODER8_0 ((uint32_t)0x00010000)
+#define GPIO_MODER_MODER8_1 ((uint32_t)0x00020000)
+#define GPIO_MODER_MODER9 ((uint32_t)0x000C0000)
+#define GPIO_MODER_MODER9_0 ((uint32_t)0x00040000)
+#define GPIO_MODER_MODER9_1 ((uint32_t)0x00080000)
+#define GPIO_MODER_MODER10 ((uint32_t)0x00300000)
+#define GPIO_MODER_MODER10_0 ((uint32_t)0x00100000)
+#define GPIO_MODER_MODER10_1 ((uint32_t)0x00200000)
+#define GPIO_MODER_MODER11 ((uint32_t)0x00C00000)
+#define GPIO_MODER_MODER11_0 ((uint32_t)0x00400000)
+#define GPIO_MODER_MODER11_1 ((uint32_t)0x00800000)
+#define GPIO_MODER_MODER12 ((uint32_t)0x03000000)
+#define GPIO_MODER_MODER12_0 ((uint32_t)0x01000000)
+#define GPIO_MODER_MODER12_1 ((uint32_t)0x02000000)
+#define GPIO_MODER_MODER13 ((uint32_t)0x0C000000)
+#define GPIO_MODER_MODER13_0 ((uint32_t)0x04000000)
+#define GPIO_MODER_MODER13_1 ((uint32_t)0x08000000)
+#define GPIO_MODER_MODER14 ((uint32_t)0x30000000)
+#define GPIO_MODER_MODER14_0 ((uint32_t)0x10000000)
+#define GPIO_MODER_MODER14_1 ((uint32_t)0x20000000)
+#define GPIO_MODER_MODER15 ((uint32_t)0xC0000000)
+#define GPIO_MODER_MODER15_0 ((uint32_t)0x40000000)
+#define GPIO_MODER_MODER15_1 ((uint32_t)0x80000000)
+
+/****************** Bit definition for GPIO_OTYPER register *****************/
+#define GPIO_OTYPER_OT_0 ((uint32_t)0x00000001)
+#define GPIO_OTYPER_OT_1 ((uint32_t)0x00000002)
+#define GPIO_OTYPER_OT_2 ((uint32_t)0x00000004)
+#define GPIO_OTYPER_OT_3 ((uint32_t)0x00000008)
+#define GPIO_OTYPER_OT_4 ((uint32_t)0x00000010)
+#define GPIO_OTYPER_OT_5 ((uint32_t)0x00000020)
+#define GPIO_OTYPER_OT_6 ((uint32_t)0x00000040)
+#define GPIO_OTYPER_OT_7 ((uint32_t)0x00000080)
+#define GPIO_OTYPER_OT_8 ((uint32_t)0x00000100)
+#define GPIO_OTYPER_OT_9 ((uint32_t)0x00000200)
+#define GPIO_OTYPER_OT_10 ((uint32_t)0x00000400)
+#define GPIO_OTYPER_OT_11 ((uint32_t)0x00000800)
+#define GPIO_OTYPER_OT_12 ((uint32_t)0x00001000)
+#define GPIO_OTYPER_OT_13 ((uint32_t)0x00002000)
+#define GPIO_OTYPER_OT_14 ((uint32_t)0x00004000)
+#define GPIO_OTYPER_OT_15 ((uint32_t)0x00008000)
+
+/**************** Bit definition for GPIO_OSPEEDR register ******************/
+#define GPIO_OSPEEDR_OSPEEDR0 ((uint32_t)0x00000003)
+#define GPIO_OSPEEDR_OSPEEDR0_0 ((uint32_t)0x00000001)
+#define GPIO_OSPEEDR_OSPEEDR0_1 ((uint32_t)0x00000002)
+#define GPIO_OSPEEDR_OSPEEDR1 ((uint32_t)0x0000000C)
+#define GPIO_OSPEEDR_OSPEEDR1_0 ((uint32_t)0x00000004)
+#define GPIO_OSPEEDR_OSPEEDR1_1 ((uint32_t)0x00000008)
+#define GPIO_OSPEEDR_OSPEEDR2 ((uint32_t)0x00000030)
+#define GPIO_OSPEEDR_OSPEEDR2_0 ((uint32_t)0x00000010)
+#define GPIO_OSPEEDR_OSPEEDR2_1 ((uint32_t)0x00000020)
+#define GPIO_OSPEEDR_OSPEEDR3 ((uint32_t)0x000000C0)
+#define GPIO_OSPEEDR_OSPEEDR3_0 ((uint32_t)0x00000040)
+#define GPIO_OSPEEDR_OSPEEDR3_1 ((uint32_t)0x00000080)
+#define GPIO_OSPEEDR_OSPEEDR4 ((uint32_t)0x00000300)
+#define GPIO_OSPEEDR_OSPEEDR4_0 ((uint32_t)0x00000100)
+#define GPIO_OSPEEDR_OSPEEDR4_1 ((uint32_t)0x00000200)
+#define GPIO_OSPEEDR_OSPEEDR5 ((uint32_t)0x00000C00)
+#define GPIO_OSPEEDR_OSPEEDR5_0 ((uint32_t)0x00000400)
+#define GPIO_OSPEEDR_OSPEEDR5_1 ((uint32_t)0x00000800)
+#define GPIO_OSPEEDR_OSPEEDR6 ((uint32_t)0x00003000)
+#define GPIO_OSPEEDR_OSPEEDR6_0 ((uint32_t)0x00001000)
+#define GPIO_OSPEEDR_OSPEEDR6_1 ((uint32_t)0x00002000)
+#define GPIO_OSPEEDR_OSPEEDR7 ((uint32_t)0x0000C000)
+#define GPIO_OSPEEDR_OSPEEDR7_0 ((uint32_t)0x00004000)
+#define GPIO_OSPEEDR_OSPEEDR7_1 ((uint32_t)0x00008000)
+#define GPIO_OSPEEDR_OSPEEDR8 ((uint32_t)0x00030000)
+#define GPIO_OSPEEDR_OSPEEDR8_0 ((uint32_t)0x00010000)
+#define GPIO_OSPEEDR_OSPEEDR8_1 ((uint32_t)0x00020000)
+#define GPIO_OSPEEDR_OSPEEDR9 ((uint32_t)0x000C0000)
+#define GPIO_OSPEEDR_OSPEEDR9_0 ((uint32_t)0x00040000)
+#define GPIO_OSPEEDR_OSPEEDR9_1 ((uint32_t)0x00080000)
+#define GPIO_OSPEEDR_OSPEEDR10 ((uint32_t)0x00300000)
+#define GPIO_OSPEEDR_OSPEEDR10_0 ((uint32_t)0x00100000)
+#define GPIO_OSPEEDR_OSPEEDR10_1 ((uint32_t)0x00200000)
+#define GPIO_OSPEEDR_OSPEEDR11 ((uint32_t)0x00C00000)
+#define GPIO_OSPEEDR_OSPEEDR11_0 ((uint32_t)0x00400000)
+#define GPIO_OSPEEDR_OSPEEDR11_1 ((uint32_t)0x00800000)
+#define GPIO_OSPEEDR_OSPEEDR12 ((uint32_t)0x03000000)
+#define GPIO_OSPEEDR_OSPEEDR12_0 ((uint32_t)0x01000000)
+#define GPIO_OSPEEDR_OSPEEDR12_1 ((uint32_t)0x02000000)
+#define GPIO_OSPEEDR_OSPEEDR13 ((uint32_t)0x0C000000)
+#define GPIO_OSPEEDR_OSPEEDR13_0 ((uint32_t)0x04000000)
+#define GPIO_OSPEEDR_OSPEEDR13_1 ((uint32_t)0x08000000)
+#define GPIO_OSPEEDR_OSPEEDR14 ((uint32_t)0x30000000)
+#define GPIO_OSPEEDR_OSPEEDR14_0 ((uint32_t)0x10000000)
+#define GPIO_OSPEEDR_OSPEEDR14_1 ((uint32_t)0x20000000)
+#define GPIO_OSPEEDR_OSPEEDR15 ((uint32_t)0xC0000000)
+#define GPIO_OSPEEDR_OSPEEDR15_0 ((uint32_t)0x40000000)
+#define GPIO_OSPEEDR_OSPEEDR15_1 ((uint32_t)0x80000000)
+
+/* Old Bit definition for GPIO_OSPEEDR register maintained for legacy purpose */
+#define GPIO_OSPEEDER_OSPEEDR0 GPIO_OSPEEDR_OSPEEDR0
+#define GPIO_OSPEEDER_OSPEEDR0_0 GPIO_OSPEEDR_OSPEEDR0_0
+#define GPIO_OSPEEDER_OSPEEDR0_1 GPIO_OSPEEDR_OSPEEDR0_1
+#define GPIO_OSPEEDER_OSPEEDR1 GPIO_OSPEEDR_OSPEEDR1
+#define GPIO_OSPEEDER_OSPEEDR1_0 GPIO_OSPEEDR_OSPEEDR1_0
+#define GPIO_OSPEEDER_OSPEEDR1_1 GPIO_OSPEEDR_OSPEEDR1_1
+#define GPIO_OSPEEDER_OSPEEDR2 GPIO_OSPEEDR_OSPEEDR2
+#define GPIO_OSPEEDER_OSPEEDR2_0 GPIO_OSPEEDR_OSPEEDR2_0
+#define GPIO_OSPEEDER_OSPEEDR2_1 GPIO_OSPEEDR_OSPEEDR2_1
+#define GPIO_OSPEEDER_OSPEEDR3 GPIO_OSPEEDR_OSPEEDR3
+#define GPIO_OSPEEDER_OSPEEDR3_0 GPIO_OSPEEDR_OSPEEDR3_0
+#define GPIO_OSPEEDER_OSPEEDR3_1 GPIO_OSPEEDR_OSPEEDR3_1
+#define GPIO_OSPEEDER_OSPEEDR4 GPIO_OSPEEDR_OSPEEDR4
+#define GPIO_OSPEEDER_OSPEEDR4_0 GPIO_OSPEEDR_OSPEEDR4_0
+#define GPIO_OSPEEDER_OSPEEDR4_1 GPIO_OSPEEDR_OSPEEDR4_1
+#define GPIO_OSPEEDER_OSPEEDR5 GPIO_OSPEEDR_OSPEEDR5
+#define GPIO_OSPEEDER_OSPEEDR5_0 GPIO_OSPEEDR_OSPEEDR5_0
+#define GPIO_OSPEEDER_OSPEEDR5_1 GPIO_OSPEEDR_OSPEEDR5_1
+#define GPIO_OSPEEDER_OSPEEDR6 GPIO_OSPEEDR_OSPEEDR6
+#define GPIO_OSPEEDER_OSPEEDR6_0 GPIO_OSPEEDR_OSPEEDR6_0
+#define GPIO_OSPEEDER_OSPEEDR6_1 GPIO_OSPEEDR_OSPEEDR6_1
+#define GPIO_OSPEEDER_OSPEEDR7 GPIO_OSPEEDR_OSPEEDR7
+#define GPIO_OSPEEDER_OSPEEDR7_0 GPIO_OSPEEDR_OSPEEDR7_0
+#define GPIO_OSPEEDER_OSPEEDR7_1 GPIO_OSPEEDR_OSPEEDR7_1
+#define GPIO_OSPEEDER_OSPEEDR8 GPIO_OSPEEDR_OSPEEDR8
+#define GPIO_OSPEEDER_OSPEEDR8_0 GPIO_OSPEEDR_OSPEEDR8_0
+#define GPIO_OSPEEDER_OSPEEDR8_1 GPIO_OSPEEDR_OSPEEDR8_1
+#define GPIO_OSPEEDER_OSPEEDR9 GPIO_OSPEEDR_OSPEEDR9
+#define GPIO_OSPEEDER_OSPEEDR9_0 GPIO_OSPEEDR_OSPEEDR9_0
+#define GPIO_OSPEEDER_OSPEEDR9_1 GPIO_OSPEEDR_OSPEEDR9_1
+#define GPIO_OSPEEDER_OSPEEDR10 GPIO_OSPEEDR_OSPEEDR10
+#define GPIO_OSPEEDER_OSPEEDR10_0 GPIO_OSPEEDR_OSPEEDR10_0
+#define GPIO_OSPEEDER_OSPEEDR10_1 GPIO_OSPEEDR_OSPEEDR10_1
+#define GPIO_OSPEEDER_OSPEEDR11 GPIO_OSPEEDR_OSPEEDR11
+#define GPIO_OSPEEDER_OSPEEDR11_0 GPIO_OSPEEDR_OSPEEDR11_0
+#define GPIO_OSPEEDER_OSPEEDR11_1 GPIO_OSPEEDR_OSPEEDR11_1
+#define GPIO_OSPEEDER_OSPEEDR12 GPIO_OSPEEDR_OSPEEDR12
+#define GPIO_OSPEEDER_OSPEEDR12_0 GPIO_OSPEEDR_OSPEEDR12_0
+#define GPIO_OSPEEDER_OSPEEDR12_1 GPIO_OSPEEDR_OSPEEDR12_1
+#define GPIO_OSPEEDER_OSPEEDR13 GPIO_OSPEEDR_OSPEEDR13
+#define GPIO_OSPEEDER_OSPEEDR13_0 GPIO_OSPEEDR_OSPEEDR13_0
+#define GPIO_OSPEEDER_OSPEEDR13_1 GPIO_OSPEEDR_OSPEEDR13_1
+#define GPIO_OSPEEDER_OSPEEDR14 GPIO_OSPEEDR_OSPEEDR14
+#define GPIO_OSPEEDER_OSPEEDR14_0 GPIO_OSPEEDR_OSPEEDR14_0
+#define GPIO_OSPEEDER_OSPEEDR14_1 GPIO_OSPEEDR_OSPEEDR14_1
+#define GPIO_OSPEEDER_OSPEEDR15 GPIO_OSPEEDR_OSPEEDR15
+#define GPIO_OSPEEDER_OSPEEDR15_0 GPIO_OSPEEDR_OSPEEDR15_0
+#define GPIO_OSPEEDER_OSPEEDR15_1 GPIO_OSPEEDR_OSPEEDR15_1
+
+/******************* Bit definition for GPIO_PUPDR register ******************/
+#define GPIO_PUPDR_PUPDR0 ((uint32_t)0x00000003)
+#define GPIO_PUPDR_PUPDR0_0 ((uint32_t)0x00000001)
+#define GPIO_PUPDR_PUPDR0_1 ((uint32_t)0x00000002)
+#define GPIO_PUPDR_PUPDR1 ((uint32_t)0x0000000C)
+#define GPIO_PUPDR_PUPDR1_0 ((uint32_t)0x00000004)
+#define GPIO_PUPDR_PUPDR1_1 ((uint32_t)0x00000008)
+#define GPIO_PUPDR_PUPDR2 ((uint32_t)0x00000030)
+#define GPIO_PUPDR_PUPDR2_0 ((uint32_t)0x00000010)
+#define GPIO_PUPDR_PUPDR2_1 ((uint32_t)0x00000020)
+#define GPIO_PUPDR_PUPDR3 ((uint32_t)0x000000C0)
+#define GPIO_PUPDR_PUPDR3_0 ((uint32_t)0x00000040)
+#define GPIO_PUPDR_PUPDR3_1 ((uint32_t)0x00000080)
+#define GPIO_PUPDR_PUPDR4 ((uint32_t)0x00000300)
+#define GPIO_PUPDR_PUPDR4_0 ((uint32_t)0x00000100)
+#define GPIO_PUPDR_PUPDR4_1 ((uint32_t)0x00000200)
+#define GPIO_PUPDR_PUPDR5 ((uint32_t)0x00000C00)
+#define GPIO_PUPDR_PUPDR5_0 ((uint32_t)0x00000400)
+#define GPIO_PUPDR_PUPDR5_1 ((uint32_t)0x00000800)
+#define GPIO_PUPDR_PUPDR6 ((uint32_t)0x00003000)
+#define GPIO_PUPDR_PUPDR6_0 ((uint32_t)0x00001000)
+#define GPIO_PUPDR_PUPDR6_1 ((uint32_t)0x00002000)
+#define GPIO_PUPDR_PUPDR7 ((uint32_t)0x0000C000)
+#define GPIO_PUPDR_PUPDR7_0 ((uint32_t)0x00004000)
+#define GPIO_PUPDR_PUPDR7_1 ((uint32_t)0x00008000)
+#define GPIO_PUPDR_PUPDR8 ((uint32_t)0x00030000)
+#define GPIO_PUPDR_PUPDR8_0 ((uint32_t)0x00010000)
+#define GPIO_PUPDR_PUPDR8_1 ((uint32_t)0x00020000)
+#define GPIO_PUPDR_PUPDR9 ((uint32_t)0x000C0000)
+#define GPIO_PUPDR_PUPDR9_0 ((uint32_t)0x00040000)
+#define GPIO_PUPDR_PUPDR9_1 ((uint32_t)0x00080000)
+#define GPIO_PUPDR_PUPDR10 ((uint32_t)0x00300000)
+#define GPIO_PUPDR_PUPDR10_0 ((uint32_t)0x00100000)
+#define GPIO_PUPDR_PUPDR10_1 ((uint32_t)0x00200000)
+#define GPIO_PUPDR_PUPDR11 ((uint32_t)0x00C00000)
+#define GPIO_PUPDR_PUPDR11_0 ((uint32_t)0x00400000)
+#define GPIO_PUPDR_PUPDR11_1 ((uint32_t)0x00800000)
+#define GPIO_PUPDR_PUPDR12 ((uint32_t)0x03000000)
+#define GPIO_PUPDR_PUPDR12_0 ((uint32_t)0x01000000)
+#define GPIO_PUPDR_PUPDR12_1 ((uint32_t)0x02000000)
+#define GPIO_PUPDR_PUPDR13 ((uint32_t)0x0C000000)
+#define GPIO_PUPDR_PUPDR13_0 ((uint32_t)0x04000000)
+#define GPIO_PUPDR_PUPDR13_1 ((uint32_t)0x08000000)
+#define GPIO_PUPDR_PUPDR14 ((uint32_t)0x30000000)
+#define GPIO_PUPDR_PUPDR14_0 ((uint32_t)0x10000000)
+#define GPIO_PUPDR_PUPDR14_1 ((uint32_t)0x20000000)
+#define GPIO_PUPDR_PUPDR15 ((uint32_t)0xC0000000)
+#define GPIO_PUPDR_PUPDR15_0 ((uint32_t)0x40000000)
+#define GPIO_PUPDR_PUPDR15_1 ((uint32_t)0x80000000)
+
+/******************* Bit definition for GPIO_IDR register *******************/
+#define GPIO_IDR_0 ((uint32_t)0x00000001)
+#define GPIO_IDR_1 ((uint32_t)0x00000002)
+#define GPIO_IDR_2 ((uint32_t)0x00000004)
+#define GPIO_IDR_3 ((uint32_t)0x00000008)
+#define GPIO_IDR_4 ((uint32_t)0x00000010)
+#define GPIO_IDR_5 ((uint32_t)0x00000020)
+#define GPIO_IDR_6 ((uint32_t)0x00000040)
+#define GPIO_IDR_7 ((uint32_t)0x00000080)
+#define GPIO_IDR_8 ((uint32_t)0x00000100)
+#define GPIO_IDR_9 ((uint32_t)0x00000200)
+#define GPIO_IDR_10 ((uint32_t)0x00000400)
+#define GPIO_IDR_11 ((uint32_t)0x00000800)
+#define GPIO_IDR_12 ((uint32_t)0x00001000)
+#define GPIO_IDR_13 ((uint32_t)0x00002000)
+#define GPIO_IDR_14 ((uint32_t)0x00004000)
+#define GPIO_IDR_15 ((uint32_t)0x00008000)
+
+/****************** Bit definition for GPIO_ODR register ********************/
+#define GPIO_ODR_0 ((uint32_t)0x00000001)
+#define GPIO_ODR_1 ((uint32_t)0x00000002)
+#define GPIO_ODR_2 ((uint32_t)0x00000004)
+#define GPIO_ODR_3 ((uint32_t)0x00000008)
+#define GPIO_ODR_4 ((uint32_t)0x00000010)
+#define GPIO_ODR_5 ((uint32_t)0x00000020)
+#define GPIO_ODR_6 ((uint32_t)0x00000040)
+#define GPIO_ODR_7 ((uint32_t)0x00000080)
+#define GPIO_ODR_8 ((uint32_t)0x00000100)
+#define GPIO_ODR_9 ((uint32_t)0x00000200)
+#define GPIO_ODR_10 ((uint32_t)0x00000400)
+#define GPIO_ODR_11 ((uint32_t)0x00000800)
+#define GPIO_ODR_12 ((uint32_t)0x00001000)
+#define GPIO_ODR_13 ((uint32_t)0x00002000)
+#define GPIO_ODR_14 ((uint32_t)0x00004000)
+#define GPIO_ODR_15 ((uint32_t)0x00008000)
+
+/****************** Bit definition for GPIO_BSRR register ********************/
+#define GPIO_BSRR_BS_0 ((uint32_t)0x00000001)
+#define GPIO_BSRR_BS_1 ((uint32_t)0x00000002)
+#define GPIO_BSRR_BS_2 ((uint32_t)0x00000004)
+#define GPIO_BSRR_BS_3 ((uint32_t)0x00000008)
+#define GPIO_BSRR_BS_4 ((uint32_t)0x00000010)
+#define GPIO_BSRR_BS_5 ((uint32_t)0x00000020)
+#define GPIO_BSRR_BS_6 ((uint32_t)0x00000040)
+#define GPIO_BSRR_BS_7 ((uint32_t)0x00000080)
+#define GPIO_BSRR_BS_8 ((uint32_t)0x00000100)
+#define GPIO_BSRR_BS_9 ((uint32_t)0x00000200)
+#define GPIO_BSRR_BS_10 ((uint32_t)0x00000400)
+#define GPIO_BSRR_BS_11 ((uint32_t)0x00000800)
+#define GPIO_BSRR_BS_12 ((uint32_t)0x00001000)
+#define GPIO_BSRR_BS_13 ((uint32_t)0x00002000)
+#define GPIO_BSRR_BS_14 ((uint32_t)0x00004000)
+#define GPIO_BSRR_BS_15 ((uint32_t)0x00008000)
+#define GPIO_BSRR_BR_0 ((uint32_t)0x00010000)
+#define GPIO_BSRR_BR_1 ((uint32_t)0x00020000)
+#define GPIO_BSRR_BR_2 ((uint32_t)0x00040000)
+#define GPIO_BSRR_BR_3 ((uint32_t)0x00080000)
+#define GPIO_BSRR_BR_4 ((uint32_t)0x00100000)
+#define GPIO_BSRR_BR_5 ((uint32_t)0x00200000)
+#define GPIO_BSRR_BR_6 ((uint32_t)0x00400000)
+#define GPIO_BSRR_BR_7 ((uint32_t)0x00800000)
+#define GPIO_BSRR_BR_8 ((uint32_t)0x01000000)
+#define GPIO_BSRR_BR_9 ((uint32_t)0x02000000)
+#define GPIO_BSRR_BR_10 ((uint32_t)0x04000000)
+#define GPIO_BSRR_BR_11 ((uint32_t)0x08000000)
+#define GPIO_BSRR_BR_12 ((uint32_t)0x10000000)
+#define GPIO_BSRR_BR_13 ((uint32_t)0x20000000)
+#define GPIO_BSRR_BR_14 ((uint32_t)0x40000000)
+#define GPIO_BSRR_BR_15 ((uint32_t)0x80000000)
+
+/****************** Bit definition for GPIO_LCKR register ********************/
+#define GPIO_LCKR_LCK0 ((uint32_t)0x00000001)
+#define GPIO_LCKR_LCK1 ((uint32_t)0x00000002)
+#define GPIO_LCKR_LCK2 ((uint32_t)0x00000004)
+#define GPIO_LCKR_LCK3 ((uint32_t)0x00000008)
+#define GPIO_LCKR_LCK4 ((uint32_t)0x00000010)
+#define GPIO_LCKR_LCK5 ((uint32_t)0x00000020)
+#define GPIO_LCKR_LCK6 ((uint32_t)0x00000040)
+#define GPIO_LCKR_LCK7 ((uint32_t)0x00000080)
+#define GPIO_LCKR_LCK8 ((uint32_t)0x00000100)
+#define GPIO_LCKR_LCK9 ((uint32_t)0x00000200)
+#define GPIO_LCKR_LCK10 ((uint32_t)0x00000400)
+#define GPIO_LCKR_LCK11 ((uint32_t)0x00000800)
+#define GPIO_LCKR_LCK12 ((uint32_t)0x00001000)
+#define GPIO_LCKR_LCK13 ((uint32_t)0x00002000)
+#define GPIO_LCKR_LCK14 ((uint32_t)0x00004000)
+#define GPIO_LCKR_LCK15 ((uint32_t)0x00008000)
+#define GPIO_LCKR_LCKK ((uint32_t)0x00010000)
+
+/****************** Bit definition for GPIO_AFRL register ********************/
+#define GPIO_AFRL_AFRL0 ((uint32_t)0x0000000F)
+#define GPIO_AFRL_AFRL1 ((uint32_t)0x000000F0)
+#define GPIO_AFRL_AFRL2 ((uint32_t)0x00000F00)
+#define GPIO_AFRL_AFRL3 ((uint32_t)0x0000F000)
+#define GPIO_AFRL_AFRL4 ((uint32_t)0x000F0000)
+#define GPIO_AFRL_AFRL5 ((uint32_t)0x00F00000)
+#define GPIO_AFRL_AFRL6 ((uint32_t)0x0F000000)
+#define GPIO_AFRL_AFRL7 ((uint32_t)0xF0000000)
+
+/****************** Bit definition for GPIO_AFRH register ********************/
+#define GPIO_AFRH_AFRH0 ((uint32_t)0x0000000F)
+#define GPIO_AFRH_AFRH1 ((uint32_t)0x000000F0)
+#define GPIO_AFRH_AFRH2 ((uint32_t)0x00000F00)
+#define GPIO_AFRH_AFRH3 ((uint32_t)0x0000F000)
+#define GPIO_AFRH_AFRH4 ((uint32_t)0x000F0000)
+#define GPIO_AFRH_AFRH5 ((uint32_t)0x00F00000)
+#define GPIO_AFRH_AFRH6 ((uint32_t)0x0F000000)
+#define GPIO_AFRH_AFRH7 ((uint32_t)0xF0000000)
+
+/****************** Bit definition for GPIO_BRR register *********************/
+#define GPIO_BRR_BR_0 ((uint32_t)0x00000001)
+#define GPIO_BRR_BR_1 ((uint32_t)0x00000002)
+#define GPIO_BRR_BR_2 ((uint32_t)0x00000004)
+#define GPIO_BRR_BR_3 ((uint32_t)0x00000008)
+#define GPIO_BRR_BR_4 ((uint32_t)0x00000010)
+#define GPIO_BRR_BR_5 ((uint32_t)0x00000020)
+#define GPIO_BRR_BR_6 ((uint32_t)0x00000040)
+#define GPIO_BRR_BR_7 ((uint32_t)0x00000080)
+#define GPIO_BRR_BR_8 ((uint32_t)0x00000100)
+#define GPIO_BRR_BR_9 ((uint32_t)0x00000200)
+#define GPIO_BRR_BR_10 ((uint32_t)0x00000400)
+#define GPIO_BRR_BR_11 ((uint32_t)0x00000800)
+#define GPIO_BRR_BR_12 ((uint32_t)0x00001000)
+#define GPIO_BRR_BR_13 ((uint32_t)0x00002000)
+#define GPIO_BRR_BR_14 ((uint32_t)0x00004000)
+#define GPIO_BRR_BR_15 ((uint32_t)0x00008000)
+
+/******************************************************************************/
+/* */
+/* Inter-integrated Circuit Interface (I2C) */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for I2C_CR1 register *******************/
+#define I2C_CR1_PE ((uint32_t)0x00000001) /*!< Peripheral enable */
+#define I2C_CR1_TXIE ((uint32_t)0x00000002) /*!< TX interrupt enable */
+#define I2C_CR1_RXIE ((uint32_t)0x00000004) /*!< RX interrupt enable */
+#define I2C_CR1_ADDRIE ((uint32_t)0x00000008) /*!< Address match interrupt enable */
+#define I2C_CR1_NACKIE ((uint32_t)0x00000010) /*!< NACK received interrupt enable */
+#define I2C_CR1_STOPIE ((uint32_t)0x00000020) /*!< STOP detection interrupt enable */
+#define I2C_CR1_TCIE ((uint32_t)0x00000040) /*!< Transfer complete interrupt enable */
+#define I2C_CR1_ERRIE ((uint32_t)0x00000080) /*!< Errors interrupt enable */
+#define I2C_CR1_DFN ((uint32_t)0x00000F00) /*!< Digital noise filter */
+#define I2C_CR1_ANFOFF ((uint32_t)0x00001000) /*!< Analog noise filter OFF */
+#define I2C_CR1_SWRST ((uint32_t)0x00002000) /*!< Software reset */
+#define I2C_CR1_TXDMAEN ((uint32_t)0x00004000) /*!< DMA transmission requests enable */
+#define I2C_CR1_RXDMAEN ((uint32_t)0x00008000) /*!< DMA reception requests enable */
+#define I2C_CR1_SBC ((uint32_t)0x00010000) /*!< Slave byte control */
+#define I2C_CR1_NOSTRETCH ((uint32_t)0x00020000) /*!< Clock stretching disable */
+#define I2C_CR1_WUPEN ((uint32_t)0x00040000) /*!< Wakeup from STOP enable */
+#define I2C_CR1_GCEN ((uint32_t)0x00080000) /*!< General call enable */
+#define I2C_CR1_SMBHEN ((uint32_t)0x00100000) /*!< SMBus host address enable */
+#define I2C_CR1_SMBDEN ((uint32_t)0x00200000) /*!< SMBus device default address enable */
+#define I2C_CR1_ALERTEN ((uint32_t)0x00400000) /*!< SMBus alert enable */
+#define I2C_CR1_PECEN ((uint32_t)0x00800000) /*!< PEC enable */
+
+/****************** Bit definition for I2C_CR2 register ********************/
+#define I2C_CR2_SADD ((uint32_t)0x000003FF) /*!< Slave address (master mode) */
+#define I2C_CR2_RD_WRN ((uint32_t)0x00000400) /*!< Transfer direction (master mode) */
+#define I2C_CR2_ADD10 ((uint32_t)0x00000800) /*!< 10-bit addressing mode (master mode) */
+#define I2C_CR2_HEAD10R ((uint32_t)0x00001000) /*!< 10-bit address header only read direction (master mode) */
+#define I2C_CR2_START ((uint32_t)0x00002000) /*!< START generation */
+#define I2C_CR2_STOP ((uint32_t)0x00004000) /*!< STOP generation (master mode) */
+#define I2C_CR2_NACK ((uint32_t)0x00008000) /*!< NACK generation (slave mode) */
+#define I2C_CR2_NBYTES ((uint32_t)0x00FF0000) /*!< Number of bytes */
+#define I2C_CR2_RELOAD ((uint32_t)0x01000000) /*!< NBYTES reload mode */
+#define I2C_CR2_AUTOEND ((uint32_t)0x02000000) /*!< Automatic end mode (master mode) */
+#define I2C_CR2_PECBYTE ((uint32_t)0x04000000) /*!< Packet error checking byte */
+
+/******************* Bit definition for I2C_OAR1 register ******************/
+#define I2C_OAR1_OA1 ((uint32_t)0x000003FF) /*!< Interface own address 1 */
+#define I2C_OAR1_OA1MODE ((uint32_t)0x00000400) /*!< Own address 1 10-bit mode */
+#define I2C_OAR1_OA1EN ((uint32_t)0x00008000) /*!< Own address 1 enable */
+
+/******************* Bit definition for I2C_OAR2 register ******************/
+#define I2C_OAR2_OA2 ((uint32_t)0x000000FE) /*!< Interface own address 2 */
+#define I2C_OAR2_OA2MSK ((uint32_t)0x00000700) /*!< Own address 2 masks */
+#define I2C_OAR2_OA2EN ((uint32_t)0x00008000) /*!< Own address 2 enable */
+
+/******************* Bit definition for I2C_TIMINGR register ****************/
+#define I2C_TIMINGR_SCLL ((uint32_t)0x000000FF) /*!< SCL low period (master mode) */
+#define I2C_TIMINGR_SCLH ((uint32_t)0x0000FF00) /*!< SCL high period (master mode) */
+#define I2C_TIMINGR_SDADEL ((uint32_t)0x000F0000) /*!< Data hold time */
+#define I2C_TIMINGR_SCLDEL ((uint32_t)0x00F00000) /*!< Data setup time */
+#define I2C_TIMINGR_PRESC ((uint32_t)0xF0000000) /*!< Timings prescaler */
+
+/******************* Bit definition for I2C_TIMEOUTR register ****************/
+#define I2C_TIMEOUTR_TIMEOUTA ((uint32_t)0x00000FFF) /*!< Bus timeout A */
+#define I2C_TIMEOUTR_TIDLE ((uint32_t)0x00001000) /*!< Idle clock timeout detection */
+#define I2C_TIMEOUTR_TIMOUTEN ((uint32_t)0x00008000) /*!< Clock timeout enable */
+#define I2C_TIMEOUTR_TIMEOUTB ((uint32_t)0x0FFF0000) /*!< Bus timeout B*/
+#define I2C_TIMEOUTR_TEXTEN ((uint32_t)0x80000000) /*!< Extended clock timeout enable */
+
+/****************** Bit definition for I2C_ISR register ********************/
+#define I2C_ISR_TXE ((uint32_t)0x00000001) /*!< Transmit data register empty */
+#define I2C_ISR_TXIS ((uint32_t)0x00000002) /*!< Transmit interrupt status */
+#define I2C_ISR_RXNE ((uint32_t)0x00000004) /*!< Receive data register not empty */
+#define I2C_ISR_ADDR ((uint32_t)0x00000008) /*!< Address matched (slave mode)*/
+#define I2C_ISR_NACKF ((uint32_t)0x00000010) /*!< NACK received flag */
+#define I2C_ISR_STOPF ((uint32_t)0x00000020) /*!< STOP detection flag */
+#define I2C_ISR_TC ((uint32_t)0x00000040) /*!< Transfer complete (master mode) */
+#define I2C_ISR_TCR ((uint32_t)0x00000080) /*!< Transfer complete reload */
+#define I2C_ISR_BERR ((uint32_t)0x00000100) /*!< Bus error */
+#define I2C_ISR_ARLO ((uint32_t)0x00000200) /*!< Arbitration lost */
+#define I2C_ISR_OVR ((uint32_t)0x00000400) /*!< Overrun/Underrun */
+#define I2C_ISR_PECERR ((uint32_t)0x00000800) /*!< PEC error in reception */
+#define I2C_ISR_TIMEOUT ((uint32_t)0x00001000) /*!< Timeout or Tlow detection flag */
+#define I2C_ISR_ALERT ((uint32_t)0x00002000) /*!< SMBus alert */
+#define I2C_ISR_BUSY ((uint32_t)0x00008000) /*!< Bus busy */
+#define I2C_ISR_DIR ((uint32_t)0x00010000) /*!< Transfer direction (slave mode) */
+#define I2C_ISR_ADDCODE ((uint32_t)0x00FE0000) /*!< Address match code (slave mode) */
+
+/****************** Bit definition for I2C_ICR register ********************/
+#define I2C_ICR_ADDRCF ((uint32_t)0x00000008) /*!< Address matched clear flag */
+#define I2C_ICR_NACKCF ((uint32_t)0x00000010) /*!< NACK clear flag */
+#define I2C_ICR_STOPCF ((uint32_t)0x00000020) /*!< STOP detection clear flag */
+#define I2C_ICR_BERRCF ((uint32_t)0x00000100) /*!< Bus error clear flag */
+#define I2C_ICR_ARLOCF ((uint32_t)0x00000200) /*!< Arbitration lost clear flag */
+#define I2C_ICR_OVRCF ((uint32_t)0x00000400) /*!< Overrun/Underrun clear flag */
+#define I2C_ICR_PECCF ((uint32_t)0x00000800) /*!< PAC error clear flag */
+#define I2C_ICR_TIMOUTCF ((uint32_t)0x00001000) /*!< Timeout clear flag */
+#define I2C_ICR_ALERTCF ((uint32_t)0x00002000) /*!< Alert clear flag */
+
+/****************** Bit definition for I2C_PECR register *******************/
+#define I2C_PECR_PEC ((uint32_t)0x000000FF) /*!< PEC register */
+
+/****************** Bit definition for I2C_RXDR register *********************/
+#define I2C_RXDR_RXDATA ((uint32_t)0x000000FF) /*!< 8-bit receive data */
+
+/****************** Bit definition for I2C_TXDR register *******************/
+#define I2C_TXDR_TXDATA ((uint32_t)0x000000FF) /*!< 8-bit transmit data */
+
+/*****************************************************************************/
+/* */
+/* Independent WATCHDOG (IWDG) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for IWDG_KR register *******************/
+#define IWDG_KR_KEY ((uint32_t)0xFFFF) /*!< Key value (write only, read 0000h) */
+
+/******************* Bit definition for IWDG_PR register *******************/
+#define IWDG_PR_PR ((uint32_t)0x07) /*!< PR[2:0] (Prescaler divider) */
+#define IWDG_PR_PR_0 ((uint32_t)0x01) /*!< Bit 0 */
+#define IWDG_PR_PR_1 ((uint32_t)0x02) /*!< Bit 1 */
+#define IWDG_PR_PR_2 ((uint32_t)0x04) /*!< Bit 2 */
+
+/******************* Bit definition for IWDG_RLR register ******************/
+#define IWDG_RLR_RL ((uint32_t)0x0FFF) /*!< Watchdog counter reload value */
+
+/******************* Bit definition for IWDG_SR register *******************/
+#define IWDG_SR_PVU ((uint32_t)0x01) /*!< Watchdog prescaler value update */
+#define IWDG_SR_RVU ((uint32_t)0x02) /*!< Watchdog counter reload value update */
+#define IWDG_SR_WVU ((uint32_t)0x04) /*!< Watchdog counter window value update */
+
+/******************* Bit definition for IWDG_KR register *******************/
+#define IWDG_WINR_WIN ((uint32_t)0x0FFF) /*!< Watchdog counter window value */
+
+/*****************************************************************************/
+/* */
+/* Power Control (PWR) */
+/* */
+/*****************************************************************************/
+
+/******************** Bit definition for PWR_CR register *******************/
+#define PWR_CR_LPDS ((uint32_t)0x00000001) /*!< Low-power Deepsleep */
+#define PWR_CR_PDDS ((uint32_t)0x00000002) /*!< Power Down Deepsleep */
+#define PWR_CR_CWUF ((uint32_t)0x00000004) /*!< Clear Wakeup Flag */
+#define PWR_CR_CSBF ((uint32_t)0x00000008) /*!< Clear Standby Flag */
+#define PWR_CR_DBP ((uint32_t)0x00000100) /*!< Disable Backup Domain write protection */
+
+/******************* Bit definition for PWR_CSR register *******************/
+#define PWR_CSR_WUF ((uint32_t)0x00000001) /*!< Wakeup Flag */
+#define PWR_CSR_SBF ((uint32_t)0x00000002) /*!< Standby Flag */
+#define PWR_CSR_VREFINTRDYF ((uint32_t)0x00000008) /*!< Internal voltage reference (VREFINT) ready flag */
+
+#define PWR_CSR_EWUP1 ((uint32_t)0x00000100) /*!< Enable WKUP pin 1 */
+#define PWR_CSR_EWUP2 ((uint32_t)0x00000200) /*!< Enable WKUP pin 2 */
+#define PWR_CSR_EWUP3 ((uint32_t)0x00000400) /*!< Enable WKUP pin 3 */
+#define PWR_CSR_EWUP4 ((uint32_t)0x00000800) /*!< Enable WKUP pin 4 */
+#define PWR_CSR_EWUP5 ((uint32_t)0x00001000) /*!< Enable WKUP pin 5 */
+#define PWR_CSR_EWUP6 ((uint32_t)0x00002000) /*!< Enable WKUP pin 6 */
+#define PWR_CSR_EWUP7 ((uint32_t)0x00004000) /*!< Enable WKUP pin 7 */
+#define PWR_CSR_EWUP8 ((uint32_t)0x00008000) /*!< Enable WKUP pin 8 */
+
+/*****************************************************************************/
+/* */
+/* Reset and Clock Control */
+/* */
+/*****************************************************************************/
+
+/******************** Bit definition for RCC_CR register *******************/
+#define RCC_CR_HSION ((uint32_t)0x00000001) /*!< Internal High Speed clock enable */
+#define RCC_CR_HSIRDY ((uint32_t)0x00000002) /*!< Internal High Speed clock ready flag */
+
+#define RCC_CR_HSITRIM ((uint32_t)0x000000F8) /*!< Internal High Speed clock trimming */
+#define RCC_CR_HSITRIM_0 ((uint32_t)0x00000008) /*!<Bit 0 */
+#define RCC_CR_HSITRIM_1 ((uint32_t)0x00000010) /*!<Bit 1 */
+#define RCC_CR_HSITRIM_2 ((uint32_t)0x00000020) /*!<Bit 2 */
+#define RCC_CR_HSITRIM_3 ((uint32_t)0x00000040) /*!<Bit 3 */
+#define RCC_CR_HSITRIM_4 ((uint32_t)0x00000080) /*!<Bit 4 */
+
+#define RCC_CR_HSICAL ((uint32_t)0x0000FF00) /*!< Internal High Speed clock Calibration */
+#define RCC_CR_HSICAL_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define RCC_CR_HSICAL_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define RCC_CR_HSICAL_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define RCC_CR_HSICAL_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define RCC_CR_HSICAL_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+#define RCC_CR_HSICAL_5 ((uint32_t)0x00002000) /*!<Bit 5 */
+#define RCC_CR_HSICAL_6 ((uint32_t)0x00004000) /*!<Bit 6 */
+#define RCC_CR_HSICAL_7 ((uint32_t)0x00008000) /*!<Bit 7 */
+
+#define RCC_CR_HSEON ((uint32_t)0x00010000) /*!< External High Speed clock enable */
+#define RCC_CR_HSERDY ((uint32_t)0x00020000) /*!< External High Speed clock ready flag */
+#define RCC_CR_HSEBYP ((uint32_t)0x00040000) /*!< External High Speed clock Bypass */
+#define RCC_CR_CSSON ((uint32_t)0x00080000) /*!< Clock Security System enable */
+#define RCC_CR_PLLON ((uint32_t)0x01000000) /*!< PLL enable */
+#define RCC_CR_PLLRDY ((uint32_t)0x02000000) /*!< PLL clock ready flag */
+
+/******************** Bit definition for RCC_CFGR register *****************/
+/*!< SW configuration */
+#define RCC_CFGR_SW ((uint32_t)0x00000003) /*!< SW[1:0] bits (System clock Switch) */
+#define RCC_CFGR_SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR_SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+#define RCC_CFGR_SW_HSI ((uint32_t)0x00000000) /*!< HSI selected as system clock */
+#define RCC_CFGR_SW_HSE ((uint32_t)0x00000001) /*!< HSE selected as system clock */
+#define RCC_CFGR_SW_PLL ((uint32_t)0x00000002) /*!< PLL selected as system clock */
+#define RCC_CFGR_SW_HSI48 ((uint32_t)0x00000003) /*!< HSI48 selected as system clock */
+
+/*!< SWS configuration */
+#define RCC_CFGR_SWS ((uint32_t)0x0000000C) /*!< SWS[1:0] bits (System Clock Switch Status) */
+#define RCC_CFGR_SWS_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define RCC_CFGR_SWS_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+
+#define RCC_CFGR_SWS_HSI ((uint32_t)0x00000000) /*!< HSI oscillator used as system clock */
+#define RCC_CFGR_SWS_HSE ((uint32_t)0x00000004) /*!< HSE oscillator used as system clock */
+#define RCC_CFGR_SWS_PLL ((uint32_t)0x00000008) /*!< PLL used as system clock */
+#define RCC_CFGR_SWS_HSI48 ((uint32_t)0x0000000C) /*!< HSI48 oscillator used as system clock */
+
+/*!< HPRE configuration */
+#define RCC_CFGR_HPRE ((uint32_t)0x000000F0) /*!< HPRE[3:0] bits (AHB prescaler) */
+#define RCC_CFGR_HPRE_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define RCC_CFGR_HPRE_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define RCC_CFGR_HPRE_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+#define RCC_CFGR_HPRE_3 ((uint32_t)0x00000080) /*!< Bit 3 */
+
+#define RCC_CFGR_HPRE_DIV1 ((uint32_t)0x00000000) /*!< SYSCLK not divided */
+#define RCC_CFGR_HPRE_DIV2 ((uint32_t)0x00000080) /*!< SYSCLK divided by 2 */
+#define RCC_CFGR_HPRE_DIV4 ((uint32_t)0x00000090) /*!< SYSCLK divided by 4 */
+#define RCC_CFGR_HPRE_DIV8 ((uint32_t)0x000000A0) /*!< SYSCLK divided by 8 */
+#define RCC_CFGR_HPRE_DIV16 ((uint32_t)0x000000B0) /*!< SYSCLK divided by 16 */
+#define RCC_CFGR_HPRE_DIV64 ((uint32_t)0x000000C0) /*!< SYSCLK divided by 64 */
+#define RCC_CFGR_HPRE_DIV128 ((uint32_t)0x000000D0) /*!< SYSCLK divided by 128 */
+#define RCC_CFGR_HPRE_DIV256 ((uint32_t)0x000000E0) /*!< SYSCLK divided by 256 */
+#define RCC_CFGR_HPRE_DIV512 ((uint32_t)0x000000F0) /*!< SYSCLK divided by 512 */
+
+/*!< PPRE configuration */
+#define RCC_CFGR_PPRE ((uint32_t)0x00000700) /*!< PRE[2:0] bits (APB prescaler) */
+#define RCC_CFGR_PPRE_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define RCC_CFGR_PPRE_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define RCC_CFGR_PPRE_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+
+#define RCC_CFGR_PPRE_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */
+#define RCC_CFGR_PPRE_DIV2 ((uint32_t)0x00000400) /*!< HCLK divided by 2 */
+#define RCC_CFGR_PPRE_DIV4 ((uint32_t)0x00000500) /*!< HCLK divided by 4 */
+#define RCC_CFGR_PPRE_DIV8 ((uint32_t)0x00000600) /*!< HCLK divided by 8 */
+#define RCC_CFGR_PPRE_DIV16 ((uint32_t)0x00000700) /*!< HCLK divided by 16 */
+
+/*!< ADCPPRE configuration */
+#define RCC_CFGR_ADCPRE ((uint32_t)0x00004000) /*!< ADCPRE bit (ADC prescaler) */
+
+#define RCC_CFGR_ADCPRE_DIV2 ((uint32_t)0x00000000) /*!< PCLK divided by 2 */
+#define RCC_CFGR_ADCPRE_DIV4 ((uint32_t)0x00004000) /*!< PCLK divided by 4 */
+
+#define RCC_CFGR_PLLSRC ((uint32_t)0x00018000) /*!< PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSI_DIV2 ((uint32_t)0x00000000) /*!< HSI clock divided by 2 selected as PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSI_PREDIV ((uint32_t)0x00008000) /*!< HSI/PREDIV clock selected as PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSE_PREDIV ((uint32_t)0x00010000) /*!< HSE/PREDIV clock selected as PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSI48_PREDIV ((uint32_t)0x00018000) /*!< HSI48/PREDIV clock selected as PLL entry clock source */
+
+#define RCC_CFGR_PLLXTPRE ((uint32_t)0x00020000) /*!< HSE divider for PLL entry */
+#define RCC_CFGR_PLLXTPRE_HSE_PREDIV_DIV1 ((uint32_t)0x00000000) /*!< HSE/PREDIV clock not divided for PLL entry */
+#define RCC_CFGR_PLLXTPRE_HSE_PREDIV_DIV2 ((uint32_t)0x00020000) /*!< HSE/PREDIV clock divided by 2 for PLL entry */
+
+/*!< PLLMUL configuration */
+#define RCC_CFGR_PLLMUL ((uint32_t)0x003C0000) /*!< PLLMUL[3:0] bits (PLL multiplication factor) */
+#define RCC_CFGR_PLLMUL_0 ((uint32_t)0x00040000) /*!< Bit 0 */
+#define RCC_CFGR_PLLMUL_1 ((uint32_t)0x00080000) /*!< Bit 1 */
+#define RCC_CFGR_PLLMUL_2 ((uint32_t)0x00100000) /*!< Bit 2 */
+#define RCC_CFGR_PLLMUL_3 ((uint32_t)0x00200000) /*!< Bit 3 */
+
+#define RCC_CFGR_PLLMUL2 ((uint32_t)0x00000000) /*!< PLL input clock*2 */
+#define RCC_CFGR_PLLMUL3 ((uint32_t)0x00040000) /*!< PLL input clock*3 */
+#define RCC_CFGR_PLLMUL4 ((uint32_t)0x00080000) /*!< PLL input clock*4 */
+#define RCC_CFGR_PLLMUL5 ((uint32_t)0x000C0000) /*!< PLL input clock*5 */
+#define RCC_CFGR_PLLMUL6 ((uint32_t)0x00100000) /*!< PLL input clock*6 */
+#define RCC_CFGR_PLLMUL7 ((uint32_t)0x00140000) /*!< PLL input clock*7 */
+#define RCC_CFGR_PLLMUL8 ((uint32_t)0x00180000) /*!< PLL input clock*8 */
+#define RCC_CFGR_PLLMUL9 ((uint32_t)0x001C0000) /*!< PLL input clock*9 */
+#define RCC_CFGR_PLLMUL10 ((uint32_t)0x00200000) /*!< PLL input clock10 */
+#define RCC_CFGR_PLLMUL11 ((uint32_t)0x00240000) /*!< PLL input clock*11 */
+#define RCC_CFGR_PLLMUL12 ((uint32_t)0x00280000) /*!< PLL input clock*12 */
+#define RCC_CFGR_PLLMUL13 ((uint32_t)0x002C0000) /*!< PLL input clock*13 */
+#define RCC_CFGR_PLLMUL14 ((uint32_t)0x00300000) /*!< PLL input clock*14 */
+#define RCC_CFGR_PLLMUL15 ((uint32_t)0x00340000) /*!< PLL input clock*15 */
+#define RCC_CFGR_PLLMUL16 ((uint32_t)0x00380000) /*!< PLL input clock*16 */
+
+/*!< USB configuration */
+#define RCC_CFGR_USBPRE ((uint32_t)0x00400000) /*!< USB prescaler */
+
+/*!< MCO configuration */
+#define RCC_CFGR_MCO ((uint32_t)0x0F000000) /*!< MCO[3:0] bits (Microcontroller Clock Output) */
+#define RCC_CFGR_MCO_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define RCC_CFGR_MCO_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define RCC_CFGR_MCO_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+#define RCC_CFGR_MCO_3 ((uint32_t)0x08000000) /*!< Bit 3 */
+
+#define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
+#define RCC_CFGR_MCO_HSI14 ((uint32_t)0x01000000) /*!< HSI14 clock selected as MCO source */
+#define RCC_CFGR_MCO_LSI ((uint32_t)0x02000000) /*!< LSI clock selected as MCO source */
+#define RCC_CFGR_MCO_LSE ((uint32_t)0x03000000) /*!< LSE clock selected as MCO source */
+#define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x04000000) /*!< System clock selected as MCO source */
+#define RCC_CFGR_MCO_HSI ((uint32_t)0x05000000) /*!< HSI clock selected as MCO source */
+#define RCC_CFGR_MCO_HSE ((uint32_t)0x06000000) /*!< HSE clock selected as MCO source */
+#define RCC_CFGR_MCO_PLL ((uint32_t)0x07000000) /*!< PLL clock divided by 2 selected as MCO source */
+#define RCC_CFGR_MCO_HSI48 ((uint32_t)0x08000000) /*!< HSI48 clock selected as MCO source */
+
+#define RCC_CFGR_MCOPRE ((uint32_t)0x70000000) /*!< MCO prescaler */
+#define RCC_CFGR_MCOPRE_DIV1 ((uint32_t)0x00000000) /*!< MCO is divided by 1 */
+#define RCC_CFGR_MCOPRE_DIV2 ((uint32_t)0x10000000) /*!< MCO is divided by 2 */
+#define RCC_CFGR_MCOPRE_DIV4 ((uint32_t)0x20000000) /*!< MCO is divided by 4 */
+#define RCC_CFGR_MCOPRE_DIV8 ((uint32_t)0x30000000) /*!< MCO is divided by 8 */
+#define RCC_CFGR_MCOPRE_DIV16 ((uint32_t)0x40000000) /*!< MCO is divided by 16 */
+#define RCC_CFGR_MCOPRE_DIV32 ((uint32_t)0x50000000) /*!< MCO is divided by 32 */
+#define RCC_CFGR_MCOPRE_DIV64 ((uint32_t)0x60000000) /*!< MCO is divided by 64 */
+#define RCC_CFGR_MCOPRE_DIV128 ((uint32_t)0x70000000) /*!< MCO is divided by 128 */
+
+#define RCC_CFGR_PLLNODIV ((uint32_t)0x80000000) /*!< PLL is not divided to MCO */
+
+/*!<****************** Bit definition for RCC_CIR register *****************/
+#define RCC_CIR_LSIRDYF ((uint32_t)0x00000001) /*!< LSI Ready Interrupt flag */
+#define RCC_CIR_LSERDYF ((uint32_t)0x00000002) /*!< LSE Ready Interrupt flag */
+#define RCC_CIR_HSIRDYF ((uint32_t)0x00000004) /*!< HSI Ready Interrupt flag */
+#define RCC_CIR_HSERDYF ((uint32_t)0x00000008) /*!< HSE Ready Interrupt flag */
+#define RCC_CIR_PLLRDYF ((uint32_t)0x00000010) /*!< PLL Ready Interrupt flag */
+#define RCC_CIR_HSI14RDYF ((uint32_t)0x00000020) /*!< HSI14 Ready Interrupt flag */
+#define RCC_CIR_HSI48RDYF ((uint32_t)0x00000040) /*!< HSI48 Ready Interrupt flag */
+#define RCC_CIR_CSSF ((uint32_t)0x00000080) /*!< Clock Security System Interrupt flag */
+#define RCC_CIR_LSIRDYIE ((uint32_t)0x00000100) /*!< LSI Ready Interrupt Enable */
+#define RCC_CIR_LSERDYIE ((uint32_t)0x00000200) /*!< LSE Ready Interrupt Enable */
+#define RCC_CIR_HSIRDYIE ((uint32_t)0x00000400) /*!< HSI Ready Interrupt Enable */
+#define RCC_CIR_HSERDYIE ((uint32_t)0x00000800) /*!< HSE Ready Interrupt Enable */
+#define RCC_CIR_PLLRDYIE ((uint32_t)0x00001000) /*!< PLL Ready Interrupt Enable */
+#define RCC_CIR_HSI14RDYIE ((uint32_t)0x00002000) /*!< HSI14 Ready Interrupt Enable */
+#define RCC_CIR_HSI48RDYIE ((uint32_t)0x00004000) /*!< HSI48 Ready Interrupt Enable */
+#define RCC_CIR_LSIRDYC ((uint32_t)0x00010000) /*!< LSI Ready Interrupt Clear */
+#define RCC_CIR_LSERDYC ((uint32_t)0x00020000) /*!< LSE Ready Interrupt Clear */
+#define RCC_CIR_HSIRDYC ((uint32_t)0x00040000) /*!< HSI Ready Interrupt Clear */
+#define RCC_CIR_HSERDYC ((uint32_t)0x00080000) /*!< HSE Ready Interrupt Clear */
+#define RCC_CIR_PLLRDYC ((uint32_t)0x00100000) /*!< PLL Ready Interrupt Clear */
+#define RCC_CIR_HSI14RDYC ((uint32_t)0x00200000) /*!< HSI14 Ready Interrupt Clear */
+#define RCC_CIR_HSI48RDYC ((uint32_t)0x00400000) /*!< HSI48 Ready Interrupt Clear */
+#define RCC_CIR_CSSC ((uint32_t)0x00800000) /*!< Clock Security System Interrupt Clear */
+
+/***************** Bit definition for RCC_APB2RSTR register ****************/
+#define RCC_APB2RSTR_SYSCFGRST ((uint32_t)0x00000001) /*!< SYSCFG clock reset */
+#define RCC_APB2RSTR_ADCRST ((uint32_t)0x00000200) /*!< ADC clock reset */
+#define RCC_APB2RSTR_TIM1RST ((uint32_t)0x00000800) /*!< TIM1 clock reset */
+#define RCC_APB2RSTR_SPI1RST ((uint32_t)0x00001000) /*!< SPI1 clock reset */
+#define RCC_APB2RSTR_USART1RST ((uint32_t)0x00004000) /*!< USART1 clock reset */
+#define RCC_APB2RSTR_TIM16RST ((uint32_t)0x00020000) /*!< TIM16 clock reset */
+#define RCC_APB2RSTR_TIM17RST ((uint32_t)0x00040000) /*!< TIM17 clock reset */
+#define RCC_APB2RSTR_DBGMCURST ((uint32_t)0x00400000) /*!< DBGMCU clock reset */
+
+/*!< Old ADC1 clock reset bit definition maintained for legacy purpose */
+#define RCC_APB2RSTR_ADC1RST RCC_APB2RSTR_ADCRST
+
+/***************** Bit definition for RCC_APB1RSTR register ****************/
+#define RCC_APB1RSTR_TIM2RST ((uint32_t)0x00000001) /*!< Timer 2 clock reset */
+#define RCC_APB1RSTR_TIM3RST ((uint32_t)0x00000002) /*!< Timer 3 clock reset */
+#define RCC_APB1RSTR_TIM14RST ((uint32_t)0x00000100) /*!< Timer 14 clock reset */
+#define RCC_APB1RSTR_WWDGRST ((uint32_t)0x00000800) /*!< Window Watchdog clock reset */
+#define RCC_APB1RSTR_SPI2RST ((uint32_t)0x00004000) /*!< SPI2 clock reset */
+#define RCC_APB1RSTR_USART2RST ((uint32_t)0x00020000) /*!< USART 2 clock reset */
+#define RCC_APB1RSTR_USART3RST ((uint32_t)0x00040000) /*!< USART 3 clock reset */
+#define RCC_APB1RSTR_USART4RST ((uint32_t)0x00080000) /*!< USART 4 clock reset */
+#define RCC_APB1RSTR_I2C1RST ((uint32_t)0x00200000) /*!< I2C 1 clock reset */
+#define RCC_APB1RSTR_I2C2RST ((uint32_t)0x00400000) /*!< I2C 2 clock reset */
+#define RCC_APB1RSTR_USBRST ((uint32_t)0x00800000) /*!< USB clock reset */
+#define RCC_APB1RSTR_CANRST ((uint32_t)0x02000000) /*!< CAN clock reset */
+#define RCC_APB1RSTR_CRSRST ((uint32_t)0x08000000) /*!< CRS clock reset */
+#define RCC_APB1RSTR_PWRRST ((uint32_t)0x10000000) /*!< PWR clock reset */
+#define RCC_APB1RSTR_DACRST ((uint32_t)0x20000000) /*!< DAC clock reset */
+#define RCC_APB1RSTR_CECRST ((uint32_t)0x40000000) /*!< CEC clock reset */
+
+/****************** Bit definition for RCC_AHBENR register *****************/
+#define RCC_AHBENR_DMAEN ((uint32_t)0x00000001) /*!< DMA1 clock enable */
+#define RCC_AHBENR_SRAMEN ((uint32_t)0x00000004) /*!< SRAM interface clock enable */
+#define RCC_AHBENR_FLITFEN ((uint32_t)0x00000010) /*!< FLITF clock enable */
+#define RCC_AHBENR_CRCEN ((uint32_t)0x00000040) /*!< CRC clock enable */
+#define RCC_AHBENR_GPIOAEN ((uint32_t)0x00020000) /*!< GPIOA clock enable */
+#define RCC_AHBENR_GPIOBEN ((uint32_t)0x00040000) /*!< GPIOB clock enable */
+#define RCC_AHBENR_GPIOCEN ((uint32_t)0x00080000) /*!< GPIOC clock enable */
+#define RCC_AHBENR_GPIOFEN ((uint32_t)0x00400000) /*!< GPIOF clock enable */
+#define RCC_AHBENR_TSCEN ((uint32_t)0x01000000) /*!< TS controller clock enable */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_AHBENR_DMA1EN RCC_AHBENR_DMAEN /*!< DMA1 clock enable */
+#define RCC_AHBENR_TSEN RCC_AHBENR_TSCEN /*!< TS clock enable */
+
+/***************** Bit definition for RCC_APB2ENR register *****************/
+#define RCC_APB2ENR_SYSCFGCOMPEN ((uint32_t)0x00000001) /*!< SYSCFG and comparator clock enable */
+#define RCC_APB2ENR_ADCEN ((uint32_t)0x00000200) /*!< ADC1 clock enable */
+#define RCC_APB2ENR_TIM1EN ((uint32_t)0x00000800) /*!< TIM1 clock enable */
+#define RCC_APB2ENR_SPI1EN ((uint32_t)0x00001000) /*!< SPI1 clock enable */
+#define RCC_APB2ENR_USART1EN ((uint32_t)0x00004000) /*!< USART1 clock enable */
+#define RCC_APB2ENR_TIM16EN ((uint32_t)0x00020000) /*!< TIM16 clock enable */
+#define RCC_APB2ENR_TIM17EN ((uint32_t)0x00040000) /*!< TIM17 clock enable */
+#define RCC_APB2ENR_DBGMCUEN ((uint32_t)0x00400000) /*!< DBGMCU clock enable */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_APB2ENR_SYSCFGEN RCC_APB2ENR_SYSCFGCOMPEN /*!< SYSCFG clock enable */
+#define RCC_APB2ENR_ADC1EN RCC_APB2ENR_ADCEN /*!< ADC1 clock enable */
+
+/***************** Bit definition for RCC_APB1ENR register *****************/
+#define RCC_APB1ENR_TIM2EN ((uint32_t)0x00000001) /*!< Timer 2 clock enable */
+#define RCC_APB1ENR_TIM3EN ((uint32_t)0x00000002) /*!< Timer 3 clock enable */
+#define RCC_APB1ENR_TIM14EN ((uint32_t)0x00000100) /*!< Timer 14 clock enable */
+#define RCC_APB1ENR_WWDGEN ((uint32_t)0x00000800) /*!< Window Watchdog clock enable */
+#define RCC_APB1ENR_SPI2EN ((uint32_t)0x00004000) /*!< SPI2 clock enable */
+#define RCC_APB1ENR_USART2EN ((uint32_t)0x00020000) /*!< USART2 clock enable */
+#define RCC_APB1ENR_USART3EN ((uint32_t)0x00040000) /*!< USART3 clock enable */
+#define RCC_APB1ENR_USART4EN ((uint32_t)0x00080000) /*!< USART4 clock enable */
+#define RCC_APB1ENR_I2C1EN ((uint32_t)0x00200000) /*!< I2C1 clock enable */
+#define RCC_APB1ENR_I2C2EN ((uint32_t)0x00400000) /*!< I2C2 clock enable */
+#define RCC_APB1ENR_USBEN ((uint32_t)0x00800000) /*!< USB clock enable */
+#define RCC_APB1ENR_CANEN ((uint32_t)0x02000000) /*!< CAN clock enable */
+#define RCC_APB1ENR_CRSEN ((uint32_t)0x08000000) /*!< CRS clock enable */
+#define RCC_APB1ENR_PWREN ((uint32_t)0x10000000) /*!< PWR clock enable */
+#define RCC_APB1ENR_DACEN ((uint32_t)0x20000000) /*!< DAC clock enable */
+#define RCC_APB1ENR_CECEN ((uint32_t)0x40000000) /*!< CEC clock enable */
+
+/******************* Bit definition for RCC_BDCR register ******************/
+#define RCC_BDCR_LSEON ((uint32_t)0x00000001) /*!< External Low Speed oscillator enable */
+#define RCC_BDCR_LSERDY ((uint32_t)0x00000002) /*!< External Low Speed oscillator Ready */
+#define RCC_BDCR_LSEBYP ((uint32_t)0x00000004) /*!< External Low Speed oscillator Bypass */
+
+#define RCC_BDCR_LSEDRV ((uint32_t)0x00000018) /*!< LSEDRV[1:0] bits (LSE Osc. drive capability) */
+#define RCC_BDCR_LSEDRV_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define RCC_BDCR_LSEDRV_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+
+#define RCC_BDCR_RTCSEL ((uint32_t)0x00000300) /*!< RTCSEL[1:0] bits (RTC clock source selection) */
+#define RCC_BDCR_RTCSEL_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define RCC_BDCR_RTCSEL_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+
+/*!< RTC configuration */
+#define RCC_BDCR_RTCSEL_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
+#define RCC_BDCR_RTCSEL_LSE ((uint32_t)0x00000100) /*!< LSE oscillator clock used as RTC clock */
+#define RCC_BDCR_RTCSEL_LSI ((uint32_t)0x00000200) /*!< LSI oscillator clock used as RTC clock */
+#define RCC_BDCR_RTCSEL_HSE ((uint32_t)0x00000300) /*!< HSE oscillator clock divided by 128 used as RTC clock */
+
+#define RCC_BDCR_RTCEN ((uint32_t)0x00008000) /*!< RTC clock enable */
+#define RCC_BDCR_BDRST ((uint32_t)0x00010000) /*!< Backup domain software reset */
+
+/******************* Bit definition for RCC_CSR register *******************/
+#define RCC_CSR_LSION ((uint32_t)0x00000001) /*!< Internal Low Speed oscillator enable */
+#define RCC_CSR_LSIRDY ((uint32_t)0x00000002) /*!< Internal Low Speed oscillator Ready */
+#define RCC_CSR_V18PWRRSTF ((uint32_t)0x00800000) /*!< V1.8 power domain reset flag */
+#define RCC_CSR_RMVF ((uint32_t)0x01000000) /*!< Remove reset flag */
+#define RCC_CSR_OBLRSTF ((uint32_t)0x02000000) /*!< OBL reset flag */
+#define RCC_CSR_PINRSTF ((uint32_t)0x04000000) /*!< PIN reset flag */
+#define RCC_CSR_PORRSTF ((uint32_t)0x08000000) /*!< POR/PDR reset flag */
+#define RCC_CSR_SFTRSTF ((uint32_t)0x10000000) /*!< Software Reset flag */
+#define RCC_CSR_IWDGRSTF ((uint32_t)0x20000000) /*!< Independent Watchdog reset flag */
+#define RCC_CSR_WWDGRSTF ((uint32_t)0x40000000) /*!< Window watchdog reset flag */
+#define RCC_CSR_LPWRRSTF ((uint32_t)0x80000000) /*!< Low-Power reset flag */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_CSR_OBL RCC_CSR_OBLRSTF /*!< OBL reset flag */
+
+/******************* Bit definition for RCC_AHBRSTR register ***************/
+#define RCC_AHBRSTR_GPIOARST ((uint32_t)0x00020000) /*!< GPIOA clock reset */
+#define RCC_AHBRSTR_GPIOBRST ((uint32_t)0x00040000) /*!< GPIOB clock reset */
+#define RCC_AHBRSTR_GPIOCRST ((uint32_t)0x00080000) /*!< GPIOC clock reset */
+#define RCC_AHBRSTR_GPIOFRST ((uint32_t)0x00400000) /*!< GPIOF clock reset */
+#define RCC_AHBRSTR_TSCRST ((uint32_t)0x01000000) /*!< TS clock reset */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_AHBRSTR_TSRST RCC_AHBRSTR_TSCRST /*!< TS clock reset */
+
+/******************* Bit definition for RCC_CFGR2 register *****************/
+/*!< PREDIV configuration */
+#define RCC_CFGR2_PREDIV ((uint32_t)0x0000000F) /*!< PREDIV[3:0] bits */
+#define RCC_CFGR2_PREDIV_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR2_PREDIV_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define RCC_CFGR2_PREDIV_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define RCC_CFGR2_PREDIV_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+
+#define RCC_CFGR2_PREDIV_DIV1 ((uint32_t)0x00000000) /*!< PREDIV input clock not divided */
+#define RCC_CFGR2_PREDIV_DIV2 ((uint32_t)0x00000001) /*!< PREDIV input clock divided by 2 */
+#define RCC_CFGR2_PREDIV_DIV3 ((uint32_t)0x00000002) /*!< PREDIV input clock divided by 3 */
+#define RCC_CFGR2_PREDIV_DIV4 ((uint32_t)0x00000003) /*!< PREDIV input clock divided by 4 */
+#define RCC_CFGR2_PREDIV_DIV5 ((uint32_t)0x00000004) /*!< PREDIV input clock divided by 5 */
+#define RCC_CFGR2_PREDIV_DIV6 ((uint32_t)0x00000005) /*!< PREDIV input clock divided by 6 */
+#define RCC_CFGR2_PREDIV_DIV7 ((uint32_t)0x00000006) /*!< PREDIV input clock divided by 7 */
+#define RCC_CFGR2_PREDIV_DIV8 ((uint32_t)0x00000007) /*!< PREDIV input clock divided by 8 */
+#define RCC_CFGR2_PREDIV_DIV9 ((uint32_t)0x00000008) /*!< PREDIV input clock divided by 9 */
+#define RCC_CFGR2_PREDIV_DIV10 ((uint32_t)0x00000009) /*!< PREDIV input clock divided by 10 */
+#define RCC_CFGR2_PREDIV_DIV11 ((uint32_t)0x0000000A) /*!< PREDIV input clock divided by 11 */
+#define RCC_CFGR2_PREDIV_DIV12 ((uint32_t)0x0000000B) /*!< PREDIV input clock divided by 12 */
+#define RCC_CFGR2_PREDIV_DIV13 ((uint32_t)0x0000000C) /*!< PREDIV input clock divided by 13 */
+#define RCC_CFGR2_PREDIV_DIV14 ((uint32_t)0x0000000D) /*!< PREDIV input clock divided by 14 */
+#define RCC_CFGR2_PREDIV_DIV15 ((uint32_t)0x0000000E) /*!< PREDIV input clock divided by 15 */
+#define RCC_CFGR2_PREDIV_DIV16 ((uint32_t)0x0000000F) /*!< PREDIV input clock divided by 16 */
+
+/******************* Bit definition for RCC_CFGR3 register *****************/
+/*!< USART1 Clock source selection */
+#define RCC_CFGR3_USART1SW ((uint32_t)0x00000003) /*!< USART1SW[1:0] bits */
+#define RCC_CFGR3_USART1SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR3_USART1SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+#define RCC_CFGR3_USART1SW_PCLK ((uint32_t)0x00000000) /*!< PCLK clock used as USART1 clock source */
+#define RCC_CFGR3_USART1SW_SYSCLK ((uint32_t)0x00000001) /*!< System clock selected as USART1 clock source */
+#define RCC_CFGR3_USART1SW_LSE ((uint32_t)0x00000002) /*!< LSE oscillator clock used as USART1 clock source */
+#define RCC_CFGR3_USART1SW_HSI ((uint32_t)0x00000003) /*!< HSI oscillator clock used as USART1 clock source */
+
+/*!< I2C1 Clock source selection */
+#define RCC_CFGR3_I2C1SW ((uint32_t)0x00000010) /*!< I2C1SW bits */
+
+#define RCC_CFGR3_I2C1SW_HSI ((uint32_t)0x00000000) /*!< HSI oscillator clock used as I2C1 clock source */
+#define RCC_CFGR3_I2C1SW_SYSCLK ((uint32_t)0x00000010) /*!< System clock selected as I2C1 clock source */
+
+/*!< CEC Clock source selection */
+#define RCC_CFGR3_CECSW ((uint32_t)0x00000040) /*!< CECSW bits */
+
+#define RCC_CFGR3_CECSW_HSI_DIV244 ((uint32_t)0x00000000) /*!< HSI clock divided by 244 selected as HDMI CEC entry clock source */
+#define RCC_CFGR3_CECSW_LSE ((uint32_t)0x00000040) /*!< LSE clock selected as HDMI CEC entry clock source */
+
+/*!< USB Clock source selection */
+#define RCC_CFGR3_USBSW ((uint32_t)0x00000080) /*!< USBSW bits */
+
+#define RCC_CFGR3_USBSW_HSI48 ((uint32_t)0x00000000) /*!< HSI48 oscillator clock used as USB clock source */
+#define RCC_CFGR3_USBSW_PLLCLK ((uint32_t)0x00000080) /*!< PLLCLK selected as USB clock source */
+
+/*!< USART2 Clock source selection */
+#define RCC_CFGR3_USART2SW ((uint32_t)0x00030000) /*!< USART2SW[1:0] bits */
+#define RCC_CFGR3_USART2SW_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define RCC_CFGR3_USART2SW_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+
+#define RCC_CFGR3_USART2SW_PCLK ((uint32_t)0x00000000) /*!< PCLK clock used as USART2 clock source */
+#define RCC_CFGR3_USART2SW_SYSCLK ((uint32_t)0x00010000) /*!< System clock selected as USART2 clock source */
+#define RCC_CFGR3_USART2SW_LSE ((uint32_t)0x00020000) /*!< LSE oscillator clock used as USART2 clock source */
+#define RCC_CFGR3_USART2SW_HSI ((uint32_t)0x00030000) /*!< HSI oscillator clock used as USART2 clock source */
+
+/******************* Bit definition for RCC_CR2 register *******************/
+#define RCC_CR2_HSI14ON ((uint32_t)0x00000001) /*!< Internal High Speed 14MHz clock enable */
+#define RCC_CR2_HSI14RDY ((uint32_t)0x00000002) /*!< Internal High Speed 14MHz clock ready flag */
+#define RCC_CR2_HSI14DIS ((uint32_t)0x00000004) /*!< Internal High Speed 14MHz clock disable */
+#define RCC_CR2_HSI14TRIM ((uint32_t)0x000000F8) /*!< Internal High Speed 14MHz clock trimming */
+#define RCC_CR2_HSI14CAL ((uint32_t)0x0000FF00) /*!< Internal High Speed 14MHz clock Calibration */
+#define RCC_CR2_HSI48ON ((uint32_t)0x00010000) /*!< Internal High Speed 48MHz clock enable */
+#define RCC_CR2_HSI48RDY ((uint32_t)0x00020000) /*!< Internal High Speed 48MHz clock ready flag */
+#define RCC_CR2_HSI48CAL ((uint32_t)0xFF000000) /*!< Internal High Speed 48MHz clock Calibration */
+
+/*****************************************************************************/
+/* */
+/* Real-Time Clock (RTC) */
+/* */
+/*****************************************************************************/
+/******************** Bits definition for RTC_TR register ******************/
+#define RTC_TR_PM ((uint32_t)0x00400000)
+#define RTC_TR_HT ((uint32_t)0x00300000)
+#define RTC_TR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TR_HU ((uint32_t)0x000F0000)
+#define RTC_TR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TR_MNT ((uint32_t)0x00007000)
+#define RTC_TR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TR_MNU ((uint32_t)0x00000F00)
+#define RTC_TR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TR_ST ((uint32_t)0x00000070)
+#define RTC_TR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TR_SU ((uint32_t)0x0000000F)
+#define RTC_TR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_DR register ******************/
+#define RTC_DR_YT ((uint32_t)0x00F00000)
+#define RTC_DR_YT_0 ((uint32_t)0x00100000)
+#define RTC_DR_YT_1 ((uint32_t)0x00200000)
+#define RTC_DR_YT_2 ((uint32_t)0x00400000)
+#define RTC_DR_YT_3 ((uint32_t)0x00800000)
+#define RTC_DR_YU ((uint32_t)0x000F0000)
+#define RTC_DR_YU_0 ((uint32_t)0x00010000)
+#define RTC_DR_YU_1 ((uint32_t)0x00020000)
+#define RTC_DR_YU_2 ((uint32_t)0x00040000)
+#define RTC_DR_YU_3 ((uint32_t)0x00080000)
+#define RTC_DR_WDU ((uint32_t)0x0000E000)
+#define RTC_DR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_DR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_DR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_DR_MT ((uint32_t)0x00001000)
+#define RTC_DR_MU ((uint32_t)0x00000F00)
+#define RTC_DR_MU_0 ((uint32_t)0x00000100)
+#define RTC_DR_MU_1 ((uint32_t)0x00000200)
+#define RTC_DR_MU_2 ((uint32_t)0x00000400)
+#define RTC_DR_MU_3 ((uint32_t)0x00000800)
+#define RTC_DR_DT ((uint32_t)0x00000030)
+#define RTC_DR_DT_0 ((uint32_t)0x00000010)
+#define RTC_DR_DT_1 ((uint32_t)0x00000020)
+#define RTC_DR_DU ((uint32_t)0x0000000F)
+#define RTC_DR_DU_0 ((uint32_t)0x00000001)
+#define RTC_DR_DU_1 ((uint32_t)0x00000002)
+#define RTC_DR_DU_2 ((uint32_t)0x00000004)
+#define RTC_DR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_CR register ******************/
+#define RTC_CR_COE ((uint32_t)0x00800000)
+#define RTC_CR_OSEL ((uint32_t)0x00600000)
+#define RTC_CR_OSEL_0 ((uint32_t)0x00200000)
+#define RTC_CR_OSEL_1 ((uint32_t)0x00400000)
+#define RTC_CR_POL ((uint32_t)0x00100000)
+#define RTC_CR_COSEL ((uint32_t)0x00080000)
+#define RTC_CR_BCK ((uint32_t)0x00040000)
+#define RTC_CR_SUB1H ((uint32_t)0x00020000)
+#define RTC_CR_ADD1H ((uint32_t)0x00010000)
+#define RTC_CR_TSIE ((uint32_t)0x00008000)
+#define RTC_CR_ALRAIE ((uint32_t)0x00001000)
+#define RTC_CR_TSE ((uint32_t)0x00000800)
+#define RTC_CR_ALRAE ((uint32_t)0x00000100)
+#define RTC_CR_FMT ((uint32_t)0x00000040)
+#define RTC_CR_BYPSHAD ((uint32_t)0x00000020)
+#define RTC_CR_REFCKON ((uint32_t)0x00000010)
+#define RTC_CR_TSEDGE ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_ISR register *****************/
+#define RTC_ISR_RECALPF ((uint32_t)0x00010000)
+#define RTC_ISR_TAMP2F ((uint32_t)0x00004000)
+#define RTC_ISR_TAMP1F ((uint32_t)0x00002000)
+#define RTC_ISR_TSOVF ((uint32_t)0x00001000)
+#define RTC_ISR_TSF ((uint32_t)0x00000800)
+#define RTC_ISR_ALRAF ((uint32_t)0x00000100)
+#define RTC_ISR_INIT ((uint32_t)0x00000080)
+#define RTC_ISR_INITF ((uint32_t)0x00000040)
+#define RTC_ISR_RSF ((uint32_t)0x00000020)
+#define RTC_ISR_INITS ((uint32_t)0x00000010)
+#define RTC_ISR_SHPF ((uint32_t)0x00000008)
+#define RTC_ISR_ALRAWF ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_PRER register ****************/
+#define RTC_PRER_PREDIV_A ((uint32_t)0x007F0000)
+#define RTC_PRER_PREDIV_S ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_ALRMAR register **************/
+#define RTC_ALRMAR_MSK4 ((uint32_t)0x80000000)
+#define RTC_ALRMAR_WDSEL ((uint32_t)0x40000000)
+#define RTC_ALRMAR_DT ((uint32_t)0x30000000)
+#define RTC_ALRMAR_DT_0 ((uint32_t)0x10000000)
+#define RTC_ALRMAR_DT_1 ((uint32_t)0x20000000)
+#define RTC_ALRMAR_DU ((uint32_t)0x0F000000)
+#define RTC_ALRMAR_DU_0 ((uint32_t)0x01000000)
+#define RTC_ALRMAR_DU_1 ((uint32_t)0x02000000)
+#define RTC_ALRMAR_DU_2 ((uint32_t)0x04000000)
+#define RTC_ALRMAR_DU_3 ((uint32_t)0x08000000)
+#define RTC_ALRMAR_MSK3 ((uint32_t)0x00800000)
+#define RTC_ALRMAR_PM ((uint32_t)0x00400000)
+#define RTC_ALRMAR_HT ((uint32_t)0x00300000)
+#define RTC_ALRMAR_HT_0 ((uint32_t)0x00100000)
+#define RTC_ALRMAR_HT_1 ((uint32_t)0x00200000)
+#define RTC_ALRMAR_HU ((uint32_t)0x000F0000)
+#define RTC_ALRMAR_HU_0 ((uint32_t)0x00010000)
+#define RTC_ALRMAR_HU_1 ((uint32_t)0x00020000)
+#define RTC_ALRMAR_HU_2 ((uint32_t)0x00040000)
+#define RTC_ALRMAR_HU_3 ((uint32_t)0x00080000)
+#define RTC_ALRMAR_MSK2 ((uint32_t)0x00008000)
+#define RTC_ALRMAR_MNT ((uint32_t)0x00007000)
+#define RTC_ALRMAR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_ALRMAR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_ALRMAR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_ALRMAR_MNU ((uint32_t)0x00000F00)
+#define RTC_ALRMAR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_ALRMAR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_ALRMAR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_ALRMAR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_ALRMAR_MSK1 ((uint32_t)0x00000080)
+#define RTC_ALRMAR_ST ((uint32_t)0x00000070)
+#define RTC_ALRMAR_ST_0 ((uint32_t)0x00000010)
+#define RTC_ALRMAR_ST_1 ((uint32_t)0x00000020)
+#define RTC_ALRMAR_ST_2 ((uint32_t)0x00000040)
+#define RTC_ALRMAR_SU ((uint32_t)0x0000000F)
+#define RTC_ALRMAR_SU_0 ((uint32_t)0x00000001)
+#define RTC_ALRMAR_SU_1 ((uint32_t)0x00000002)
+#define RTC_ALRMAR_SU_2 ((uint32_t)0x00000004)
+#define RTC_ALRMAR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_WPR register *****************/
+#define RTC_WPR_KEY ((uint32_t)0x000000FF)
+
+/******************** Bits definition for RTC_SSR register *****************/
+#define RTC_SSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_SHIFTR register **************/
+#define RTC_SHIFTR_SUBFS ((uint32_t)0x00007FFF)
+#define RTC_SHIFTR_ADD1S ((uint32_t)0x80000000)
+
+/******************** Bits definition for RTC_TSTR register ****************/
+#define RTC_TSTR_PM ((uint32_t)0x00400000)
+#define RTC_TSTR_HT ((uint32_t)0x00300000)
+#define RTC_TSTR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TSTR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TSTR_HU ((uint32_t)0x000F0000)
+#define RTC_TSTR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TSTR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TSTR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TSTR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TSTR_MNT ((uint32_t)0x00007000)
+#define RTC_TSTR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TSTR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TSTR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TSTR_MNU ((uint32_t)0x00000F00)
+#define RTC_TSTR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TSTR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TSTR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TSTR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TSTR_ST ((uint32_t)0x00000070)
+#define RTC_TSTR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TSTR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TSTR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TSTR_SU ((uint32_t)0x0000000F)
+#define RTC_TSTR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TSTR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TSTR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TSTR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSDR register ****************/
+#define RTC_TSDR_WDU ((uint32_t)0x0000E000)
+#define RTC_TSDR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_TSDR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_TSDR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_TSDR_MT ((uint32_t)0x00001000)
+#define RTC_TSDR_MU ((uint32_t)0x00000F00)
+#define RTC_TSDR_MU_0 ((uint32_t)0x00000100)
+#define RTC_TSDR_MU_1 ((uint32_t)0x00000200)
+#define RTC_TSDR_MU_2 ((uint32_t)0x00000400)
+#define RTC_TSDR_MU_3 ((uint32_t)0x00000800)
+#define RTC_TSDR_DT ((uint32_t)0x00000030)
+#define RTC_TSDR_DT_0 ((uint32_t)0x00000010)
+#define RTC_TSDR_DT_1 ((uint32_t)0x00000020)
+#define RTC_TSDR_DU ((uint32_t)0x0000000F)
+#define RTC_TSDR_DU_0 ((uint32_t)0x00000001)
+#define RTC_TSDR_DU_1 ((uint32_t)0x00000002)
+#define RTC_TSDR_DU_2 ((uint32_t)0x00000004)
+#define RTC_TSDR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSSSR register ***************/
+#define RTC_TSSSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_CALR register ****************/
+#define RTC_CALR_CALP ((uint32_t)0x00008000)
+#define RTC_CALR_CALW8 ((uint32_t)0x00004000)
+#define RTC_CALR_CALW16 ((uint32_t)0x00002000)
+#define RTC_CALR_CALM ((uint32_t)0x000001FF)
+#define RTC_CALR_CALM_0 ((uint32_t)0x00000001)
+#define RTC_CALR_CALM_1 ((uint32_t)0x00000002)
+#define RTC_CALR_CALM_2 ((uint32_t)0x00000004)
+#define RTC_CALR_CALM_3 ((uint32_t)0x00000008)
+#define RTC_CALR_CALM_4 ((uint32_t)0x00000010)
+#define RTC_CALR_CALM_5 ((uint32_t)0x00000020)
+#define RTC_CALR_CALM_6 ((uint32_t)0x00000040)
+#define RTC_CALR_CALM_7 ((uint32_t)0x00000080)
+#define RTC_CALR_CALM_8 ((uint32_t)0x00000100)
+
+/******************** Bits definition for RTC_TAFCR register ***************/
+#define RTC_TAFCR_ALARMOUTTYPE ((uint32_t)0x00040000)
+#define RTC_TAFCR_TAMPPUDIS ((uint32_t)0x00008000)
+#define RTC_TAFCR_TAMPPRCH ((uint32_t)0x00006000)
+#define RTC_TAFCR_TAMPPRCH_0 ((uint32_t)0x00002000)
+#define RTC_TAFCR_TAMPPRCH_1 ((uint32_t)0x00004000)
+#define RTC_TAFCR_TAMPFLT ((uint32_t)0x00001800)
+#define RTC_TAFCR_TAMPFLT_0 ((uint32_t)0x00000800)
+#define RTC_TAFCR_TAMPFLT_1 ((uint32_t)0x00001000)
+#define RTC_TAFCR_TAMPFREQ ((uint32_t)0x00000700)
+#define RTC_TAFCR_TAMPFREQ_0 ((uint32_t)0x00000100)
+#define RTC_TAFCR_TAMPFREQ_1 ((uint32_t)0x00000200)
+#define RTC_TAFCR_TAMPFREQ_2 ((uint32_t)0x00000400)
+#define RTC_TAFCR_TAMPTS ((uint32_t)0x00000080)
+#define RTC_TAFCR_TAMP2TRG ((uint32_t)0x00000010)
+#define RTC_TAFCR_TAMP2E ((uint32_t)0x00000008)
+#define RTC_TAFCR_TAMPIE ((uint32_t)0x00000004)
+#define RTC_TAFCR_TAMP1TRG ((uint32_t)0x00000002)
+#define RTC_TAFCR_TAMP1E ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_ALRMASSR register ************/
+#define RTC_ALRMASSR_MASKSS ((uint32_t)0x0F000000)
+#define RTC_ALRMASSR_MASKSS_0 ((uint32_t)0x01000000)
+#define RTC_ALRMASSR_MASKSS_1 ((uint32_t)0x02000000)
+#define RTC_ALRMASSR_MASKSS_2 ((uint32_t)0x04000000)
+#define RTC_ALRMASSR_MASKSS_3 ((uint32_t)0x08000000)
+#define RTC_ALRMASSR_SS ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_BKP0R register ***************/
+#define RTC_BKP0R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP1R register ***************/
+#define RTC_BKP1R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP2R register ***************/
+#define RTC_BKP2R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP3R register ***************/
+#define RTC_BKP3R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP4R register ***************/
+#define RTC_BKP4R ((uint32_t)0xFFFFFFFF)
+
+/******************** Number of backup registers ******************************/
+#define RTC_BKP_NUMBER ((uint32_t)0x00000005)
+
+/*****************************************************************************/
+/* */
+/* Serial Peripheral Interface (SPI) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for SPI_CR1 register *******************/
+#define SPI_CR1_CPHA ((uint32_t)0x00000001) /*!< Clock Phase */
+#define SPI_CR1_CPOL ((uint32_t)0x00000002) /*!< Clock Polarity */
+#define SPI_CR1_MSTR ((uint32_t)0x00000004) /*!< Master Selection */
+#define SPI_CR1_BR ((uint32_t)0x00000038) /*!< BR[2:0] bits (Baud Rate Control) */
+#define SPI_CR1_BR_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define SPI_CR1_BR_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define SPI_CR1_BR_2 ((uint32_t)0x00000020) /*!< Bit 2 */
+#define SPI_CR1_SPE ((uint32_t)0x00000040) /*!< SPI Enable */
+#define SPI_CR1_LSBFIRST ((uint32_t)0x00000080) /*!< Frame Format */
+#define SPI_CR1_SSI ((uint32_t)0x00000100) /*!< Internal slave select */
+#define SPI_CR1_SSM ((uint32_t)0x00000200) /*!< Software slave management */
+#define SPI_CR1_RXONLY ((uint32_t)0x00000400) /*!< Receive only */
+#define SPI_CR1_CRCL ((uint32_t)0x00000800) /*!< CRC Length */
+#define SPI_CR1_CRCNEXT ((uint32_t)0x00001000) /*!< Transmit CRC next */
+#define SPI_CR1_CRCEN ((uint32_t)0x00002000) /*!< Hardware CRC calculation enable */
+#define SPI_CR1_BIDIOE ((uint32_t)0x00004000) /*!< Output enable in bidirectional mode */
+#define SPI_CR1_BIDIMODE ((uint32_t)0x00008000) /*!< Bidirectional data mode enable */
+
+/******************* Bit definition for SPI_CR2 register *******************/
+#define SPI_CR2_RXDMAEN ((uint32_t)0x00000001) /*!< Rx Buffer DMA Enable */
+#define SPI_CR2_TXDMAEN ((uint32_t)0x00000002) /*!< Tx Buffer DMA Enable */
+#define SPI_CR2_SSOE ((uint32_t)0x00000004) /*!< SS Output Enable */
+#define SPI_CR2_NSSP ((uint32_t)0x00000008) /*!< NSS pulse management Enable */
+#define SPI_CR2_FRF ((uint32_t)0x00000010) /*!< Frame Format Enable */
+#define SPI_CR2_ERRIE ((uint32_t)0x00000020) /*!< Error Interrupt Enable */
+#define SPI_CR2_RXNEIE ((uint32_t)0x00000040) /*!< RX buffer Not Empty Interrupt Enable */
+#define SPI_CR2_TXEIE ((uint32_t)0x00000080) /*!< Tx buffer Empty Interrupt Enable */
+#define SPI_CR2_DS ((uint32_t)0x00000F00) /*!< DS[3:0] Data Size */
+#define SPI_CR2_DS_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define SPI_CR2_DS_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define SPI_CR2_DS_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define SPI_CR2_DS_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+#define SPI_CR2_FRXTH ((uint32_t)0x00001000) /*!< FIFO reception Threshold */
+#define SPI_CR2_LDMARX ((uint32_t)0x00002000) /*!< Last DMA transfer for reception */
+#define SPI_CR2_LDMATX ((uint32_t)0x00004000) /*!< Last DMA transfer for transmission */
+
+/******************** Bit definition for SPI_SR register *******************/
+#define SPI_SR_RXNE ((uint32_t)0x00000001) /*!< Receive buffer Not Empty */
+#define SPI_SR_TXE ((uint32_t)0x00000002) /*!< Transmit buffer Empty */
+#define SPI_SR_CHSIDE ((uint32_t)0x00000004) /*!< Channel side */
+#define SPI_SR_UDR ((uint32_t)0x00000008) /*!< Underrun flag */
+#define SPI_SR_CRCERR ((uint32_t)0x00000010) /*!< CRC Error flag */
+#define SPI_SR_MODF ((uint32_t)0x00000020) /*!< Mode fault */
+#define SPI_SR_OVR ((uint32_t)0x00000040) /*!< Overrun flag */
+#define SPI_SR_BSY ((uint32_t)0x00000080) /*!< Busy flag */
+#define SPI_SR_FRE ((uint32_t)0x00000100) /*!< TI frame format error */
+#define SPI_SR_FRLVL ((uint32_t)0x00000600) /*!< FIFO Reception Level */
+#define SPI_SR_FRLVL_0 ((uint32_t)0x00000200) /*!< Bit 0 */
+#define SPI_SR_FRLVL_1 ((uint32_t)0x00000400) /*!< Bit 1 */
+#define SPI_SR_FTLVL ((uint32_t)0x00001800) /*!< FIFO Transmission Level */
+#define SPI_SR_FTLVL_0 ((uint32_t)0x00000800) /*!< Bit 0 */
+#define SPI_SR_FTLVL_1 ((uint32_t)0x00001000) /*!< Bit 1 */
+
+/******************** Bit definition for SPI_DR register *******************/
+#define SPI_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data Register */
+
+/******************* Bit definition for SPI_CRCPR register *****************/
+#define SPI_CRCPR_CRCPOLY ((uint32_t)0xFFFFFFFF) /*!< CRC polynomial register */
+
+/****************** Bit definition for SPI_RXCRCR register *****************/
+#define SPI_RXCRCR_RXCRC ((uint32_t)0xFFFFFFFF) /*!< Rx CRC Register */
+
+/****************** Bit definition for SPI_TXCRCR register *****************/
+#define SPI_TXCRCR_TXCRC ((uint32_t)0xFFFFFFFF) /*!< Tx CRC Register */
+
+/****************** Bit definition for SPI_I2SCFGR register ****************/
+#define SPI_I2SCFGR_CHLEN ((uint32_t)0x00000001) /*!<Channel length (number of bits per audio channel) */
+#define SPI_I2SCFGR_DATLEN ((uint32_t)0x00000006) /*!<DATLEN[1:0] bits (Data length to be transferred) */
+#define SPI_I2SCFGR_DATLEN_0 ((uint32_t)0x00000002) /*!<Bit 0 */
+#define SPI_I2SCFGR_DATLEN_1 ((uint32_t)0x00000004) /*!<Bit 1 */
+#define SPI_I2SCFGR_CKPOL ((uint32_t)0x00000008) /*!<steady state clock polarity */
+#define SPI_I2SCFGR_I2SSTD ((uint32_t)0x00000030) /*!<I2SSTD[1:0] bits (I2S standard selection) */
+#define SPI_I2SCFGR_I2SSTD_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SSTD_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define SPI_I2SCFGR_PCMSYNC ((uint32_t)0x00000080) /*!<PCM frame synchronization */
+#define SPI_I2SCFGR_I2SCFG ((uint32_t)0x00000300) /*!<I2SCFG[1:0] bits (I2S configuration mode) */
+#define SPI_I2SCFGR_I2SCFG_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SCFG_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define SPI_I2SCFGR_I2SE ((uint32_t)0x00000400) /*!<I2S Enable */
+#define SPI_I2SCFGR_I2SMOD ((uint32_t)0x00000800) /*!<I2S mode selection */
+
+/****************** Bit definition for SPI_I2SPR register ******************/
+#define SPI_I2SPR_I2SDIV ((uint32_t)0x000000FF) /*!<I2S Linear prescaler */
+#define SPI_I2SPR_ODD ((uint32_t)0x00000100) /*!<Odd factor for the prescaler */
+#define SPI_I2SPR_MCKOE ((uint32_t)0x00000200) /*!<Master Clock Output Enable */
+
+/*****************************************************************************/
+/* */
+/* System Configuration (SYSCFG) */
+/* */
+/*****************************************************************************/
+/***************** Bit definition for SYSCFG_CFGR1 register ****************/
+#define SYSCFG_CFGR1_MEM_MODE ((uint32_t)0x00000003) /*!< SYSCFG_Memory Remap Config */
+#define SYSCFG_CFGR1_MEM_MODE_0 ((uint32_t)0x00000001) /*!< SYSCFG_Memory Remap Config Bit 0 */
+#define SYSCFG_CFGR1_MEM_MODE_1 ((uint32_t)0x00000002) /*!< SYSCFG_Memory Remap Config Bit 1 */
+
+#define SYSCFG_CFGR1_PA11_PA12_RMP ((uint32_t)0x00000010) /*!< PA11 and PA12 remap on QFN28 and TSSOP20 packages */
+
+#define SYSCFG_CFGR1_DMA_RMP ((uint32_t)0x00001F00) /*!< DMA remap mask */
+#define SYSCFG_CFGR1_ADC_DMA_RMP ((uint32_t)0x00000100) /*!< ADC DMA remap */
+#define SYSCFG_CFGR1_USART1TX_DMA_RMP ((uint32_t)0x00000200) /*!< USART1 TX DMA remap */
+#define SYSCFG_CFGR1_USART1RX_DMA_RMP ((uint32_t)0x00000400) /*!< USART1 RX DMA remap */
+#define SYSCFG_CFGR1_TIM16_DMA_RMP ((uint32_t)0x00000800) /*!< Timer 16 DMA remap */
+#define SYSCFG_CFGR1_TIM17_DMA_RMP ((uint32_t)0x00001000) /*!< Timer 17 DMA remap */
+
+#define SYSCFG_CFGR1_I2C_FMP_PB6 ((uint32_t)0x00010000) /*!< I2C PB6 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB7 ((uint32_t)0x00020000) /*!< I2C PB7 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB8 ((uint32_t)0x00040000) /*!< I2C PB8 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB9 ((uint32_t)0x00080000) /*!< I2C PB9 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_I2C1 ((uint32_t)0x00100000) /*!< Enable Fast Mode Plus on PB10, PB11, PF6 and PF7 */
+#define SYSCFG_CFGR1_I2C_FMP_I2C2 ((uint32_t)0x00200000) /*!< Enable I2C2 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PA9 ((uint32_t)0x00400000) /*!< Enable Fast Mode Plus on PA9 */
+#define SYSCFG_CFGR1_I2C_FMP_PA10 ((uint32_t)0x00800000) /*!< Enable Fast Mode Plus on PA10 */
+
+/***************** Bit definition for SYSCFG_EXTICR1 register **************/
+#define SYSCFG_EXTICR1_EXTI0 ((uint16_t)0x000F) /*!< EXTI 0 configuration */
+#define SYSCFG_EXTICR1_EXTI1 ((uint16_t)0x00F0) /*!< EXTI 1 configuration */
+#define SYSCFG_EXTICR1_EXTI2 ((uint16_t)0x0F00) /*!< EXTI 2 configuration */
+#define SYSCFG_EXTICR1_EXTI3 ((uint16_t)0xF000) /*!< EXTI 3 configuration */
+
+/**
+ * @brief EXTI0 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI0_PA ((uint16_t)0x0000) /*!< PA[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PB ((uint16_t)0x0001) /*!< PB[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PC ((uint16_t)0x0002) /*!< PC[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PD ((uint16_t)0x0003) /*!< PD[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PE ((uint16_t)0x0004) /*!< PE[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PF ((uint16_t)0x0005) /*!< PF[0] pin */
+
+/**
+ * @brief EXTI1 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI1_PA ((uint16_t)0x0000) /*!< PA[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PB ((uint16_t)0x0010) /*!< PB[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PC ((uint16_t)0x0020) /*!< PC[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PD ((uint16_t)0x0030) /*!< PD[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PE ((uint16_t)0x0040) /*!< PE[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PF ((uint16_t)0x0050) /*!< PF[1] pin */
+
+/**
+ * @brief EXTI2 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI2_PA ((uint16_t)0x0000) /*!< PA[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PB ((uint16_t)0x0100) /*!< PB[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PC ((uint16_t)0x0200) /*!< PC[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PD ((uint16_t)0x0300) /*!< PD[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PE ((uint16_t)0x0400) /*!< PE[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PF ((uint16_t)0x0500) /*!< PF[2] pin */
+
+/**
+ * @brief EXTI3 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI3_PA ((uint16_t)0x0000) /*!< PA[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PB ((uint16_t)0x1000) /*!< PB[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PC ((uint16_t)0x2000) /*!< PC[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PD ((uint16_t)0x3000) /*!< PD[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PE ((uint16_t)0x4000) /*!< PE[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PF ((uint16_t)0x5000) /*!< PF[3] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR2 register **************/
+#define SYSCFG_EXTICR2_EXTI4 ((uint16_t)0x000F) /*!< EXTI 4 configuration */
+#define SYSCFG_EXTICR2_EXTI5 ((uint16_t)0x00F0) /*!< EXTI 5 configuration */
+#define SYSCFG_EXTICR2_EXTI6 ((uint16_t)0x0F00) /*!< EXTI 6 configuration */
+#define SYSCFG_EXTICR2_EXTI7 ((uint16_t)0xF000) /*!< EXTI 7 configuration */
+
+/**
+ * @brief EXTI4 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI4_PA ((uint16_t)0x0000) /*!< PA[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PB ((uint16_t)0x0001) /*!< PB[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PC ((uint16_t)0x0002) /*!< PC[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PD ((uint16_t)0x0003) /*!< PD[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PE ((uint16_t)0x0004) /*!< PE[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PF ((uint16_t)0x0005) /*!< PF[4] pin */
+
+/**
+ * @brief EXTI5 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI5_PA ((uint16_t)0x0000) /*!< PA[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PB ((uint16_t)0x0010) /*!< PB[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PC ((uint16_t)0x0020) /*!< PC[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PD ((uint16_t)0x0030) /*!< PD[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PE ((uint16_t)0x0040) /*!< PE[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PF ((uint16_t)0x0050) /*!< PF[5] pin */
+
+/**
+ * @brief EXTI6 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI6_PA ((uint16_t)0x0000) /*!< PA[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PB ((uint16_t)0x0100) /*!< PB[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PC ((uint16_t)0x0200) /*!< PC[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PD ((uint16_t)0x0300) /*!< PD[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PE ((uint16_t)0x0400) /*!< PE[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PF ((uint16_t)0x0500) /*!< PF[6] pin */
+
+/**
+ * @brief EXTI7 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI7_PA ((uint16_t)0x0000) /*!< PA[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PB ((uint16_t)0x1000) /*!< PB[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PC ((uint16_t)0x2000) /*!< PC[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PD ((uint16_t)0x3000) /*!< PD[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PE ((uint16_t)0x4000) /*!< PE[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PF ((uint16_t)0x5000) /*!< PF[7] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR3 register **************/
+#define SYSCFG_EXTICR3_EXTI8 ((uint16_t)0x000F) /*!< EXTI 8 configuration */
+#define SYSCFG_EXTICR3_EXTI9 ((uint16_t)0x00F0) /*!< EXTI 9 configuration */
+#define SYSCFG_EXTICR3_EXTI10 ((uint16_t)0x0F00) /*!< EXTI 10 configuration */
+#define SYSCFG_EXTICR3_EXTI11 ((uint16_t)0xF000) /*!< EXTI 11 configuration */
+
+/**
+ * @brief EXTI8 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI8_PA ((uint16_t)0x0000) /*!< PA[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PB ((uint16_t)0x0001) /*!< PB[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PC ((uint16_t)0x0002) /*!< PC[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PD ((uint16_t)0x0003) /*!< PD[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PE ((uint16_t)0x0004) /*!< PE[8] pin */
+
+/**
+ * @brief EXTI9 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI9_PA ((uint16_t)0x0000) /*!< PA[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PB ((uint16_t)0x0010) /*!< PB[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PC ((uint16_t)0x0020) /*!< PC[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PD ((uint16_t)0x0030) /*!< PD[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PE ((uint16_t)0x0040) /*!< PE[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PF ((uint16_t)0x0050) /*!< PF[9] pin */
+
+/**
+ * @brief EXTI10 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI10_PA ((uint16_t)0x0000) /*!< PA[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PB ((uint16_t)0x0100) /*!< PB[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PC ((uint16_t)0x0200) /*!< PC[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PD ((uint16_t)0x0300) /*!< PE[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PE ((uint16_t)0x0400) /*!< PD[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PF ((uint16_t)0x0500) /*!< PF[10] pin */
+
+/**
+ * @brief EXTI11 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI11_PA ((uint16_t)0x0000) /*!< PA[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PB ((uint16_t)0x1000) /*!< PB[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PC ((uint16_t)0x2000) /*!< PC[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PD ((uint16_t)0x3000) /*!< PD[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PE ((uint16_t)0x4000) /*!< PE[11] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR4 register **************/
+#define SYSCFG_EXTICR4_EXTI12 ((uint16_t)0x000F) /*!< EXTI 12 configuration */
+#define SYSCFG_EXTICR4_EXTI13 ((uint16_t)0x00F0) /*!< EXTI 13 configuration */
+#define SYSCFG_EXTICR4_EXTI14 ((uint16_t)0x0F00) /*!< EXTI 14 configuration */
+#define SYSCFG_EXTICR4_EXTI15 ((uint16_t)0xF000) /*!< EXTI 15 configuration */
+
+/**
+ * @brief EXTI12 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI12_PA ((uint16_t)0x0000) /*!< PA[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PB ((uint16_t)0x0001) /*!< PB[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PC ((uint16_t)0x0002) /*!< PC[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PD ((uint16_t)0x0003) /*!< PD[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PE ((uint16_t)0x0004) /*!< PE[12] pin */
+
+/**
+ * @brief EXTI13 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI13_PA ((uint16_t)0x0000) /*!< PA[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PB ((uint16_t)0x0010) /*!< PB[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PC ((uint16_t)0x0020) /*!< PC[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PD ((uint16_t)0x0030) /*!< PD[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PE ((uint16_t)0x0040) /*!< PE[13] pin */
+
+/**
+ * @brief EXTI14 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI14_PA ((uint16_t)0x0000) /*!< PA[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PB ((uint16_t)0x0100) /*!< PB[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PC ((uint16_t)0x0200) /*!< PC[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PD ((uint16_t)0x0300) /*!< PD[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PE ((uint16_t)0x0400) /*!< PE[14] pin */
+
+/**
+ * @brief EXTI15 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI15_PA ((uint16_t)0x0000) /*!< PA[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PB ((uint16_t)0x1000) /*!< PB[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PC ((uint16_t)0x2000) /*!< PC[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PD ((uint16_t)0x3000) /*!< PD[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PE ((uint16_t)0x4000) /*!< PE[15] pin */
+
+/***************** Bit definition for SYSCFG_CFGR2 register ****************/
+#define SYSCFG_CFGR2_LOCKUP_LOCK ((uint32_t)0x00000001) /*!< Enables and locks the LOCKUP (Hardfault) output of CortexM0 with Break Input of TIMER1 */
+#define SYSCFG_CFGR2_SRAM_PARITY_LOCK ((uint32_t)0x00000002) /*!< Enables and locks the SRAM_PARITY error signal with Break Input of TIMER1 */
+#define SYSCFG_CFGR2_SRAM_PEF ((uint32_t)0x00000100) /*!< SRAM Parity error flag */
+#define SYSCFG_CFGR2_SRAM_PE SYSCFG_CFGR2_SRAM_PEF /*!< SRAM Parity error flag (define maintained for legacy purpose) */
+
+/*****************************************************************************/
+/* */
+/* Timers (TIM) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for TIM_CR1 register *******************/
+#define TIM_CR1_CEN ((uint32_t)0x00000001) /*!<Counter enable */
+#define TIM_CR1_UDIS ((uint32_t)0x00000002) /*!<Update disable */
+#define TIM_CR1_URS ((uint32_t)0x00000004) /*!<Update request source */
+#define TIM_CR1_OPM ((uint32_t)0x00000008) /*!<One pulse mode */
+#define TIM_CR1_DIR ((uint32_t)0x00000010) /*!<Direction */
+
+#define TIM_CR1_CMS ((uint32_t)0x00000060) /*!<CMS[1:0] bits (Center-aligned mode selection) */
+#define TIM_CR1_CMS_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define TIM_CR1_CMS_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+
+#define TIM_CR1_ARPE ((uint32_t)0x00000080) /*!<Auto-reload preload enable */
+
+#define TIM_CR1_CKD ((uint32_t)0x00000300) /*!<CKD[1:0] bits (clock division) */
+#define TIM_CR1_CKD_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CR1_CKD_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+/******************* Bit definition for TIM_CR2 register *******************/
+#define TIM_CR2_CCPC ((uint32_t)0x00000001) /*!<Capture/Compare Preloaded Control */
+#define TIM_CR2_CCUS ((uint32_t)0x00000004) /*!<Capture/Compare Control Update Selection */
+#define TIM_CR2_CCDS ((uint32_t)0x00000008) /*!<Capture/Compare DMA Selection */
+
+#define TIM_CR2_MMS ((uint32_t)0x00000070) /*!<MMS[2:0] bits (Master Mode Selection) */
+#define TIM_CR2_MMS_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CR2_MMS_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CR2_MMS_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CR2_TI1S ((uint32_t)0x00000080) /*!<TI1 Selection */
+#define TIM_CR2_OIS1 ((uint32_t)0x00000100) /*!<Output Idle state 1 (OC1 output) */
+#define TIM_CR2_OIS1N ((uint32_t)0x00000200) /*!<Output Idle state 1 (OC1N output) */
+#define TIM_CR2_OIS2 ((uint32_t)0x00000400) /*!<Output Idle state 2 (OC2 output) */
+#define TIM_CR2_OIS2N ((uint32_t)0x00000800) /*!<Output Idle state 2 (OC2N output) */
+#define TIM_CR2_OIS3 ((uint32_t)0x00001000) /*!<Output Idle state 3 (OC3 output) */
+#define TIM_CR2_OIS3N ((uint32_t)0x00002000) /*!<Output Idle state 3 (OC3N output) */
+#define TIM_CR2_OIS4 ((uint32_t)0x00004000) /*!<Output Idle state 4 (OC4 output) */
+
+/******************* Bit definition for TIM_SMCR register ******************/
+#define TIM_SMCR_SMS ((uint32_t)0x00000007) /*!<SMS[2:0] bits (Slave mode selection) */
+#define TIM_SMCR_SMS_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_SMCR_SMS_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_SMCR_SMS_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+
+#define TIM_SMCR_OCCS ((uint32_t)0x00000008) /*!< OCREF clear selection */
+
+#define TIM_SMCR_TS ((uint32_t)0x00000070) /*!<TS[2:0] bits (Trigger selection) */
+#define TIM_SMCR_TS_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_SMCR_TS_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_SMCR_TS_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_SMCR_MSM ((uint32_t)0x00000080) /*!<Master/slave mode */
+
+#define TIM_SMCR_ETF ((uint32_t)0x00000F00) /*!<ETF[3:0] bits (External trigger filter) */
+#define TIM_SMCR_ETF_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_SMCR_ETF_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define TIM_SMCR_ETF_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define TIM_SMCR_ETF_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+
+#define TIM_SMCR_ETPS ((uint32_t)0x00003000) /*!<ETPS[1:0] bits (External trigger prescaler) */
+#define TIM_SMCR_ETPS_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_SMCR_ETPS_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+
+#define TIM_SMCR_ECE ((uint32_t)0x00004000) /*!<External clock enable */
+#define TIM_SMCR_ETP ((uint32_t)0x00008000) /*!<External trigger polarity */
+
+/******************* Bit definition for TIM_DIER register ******************/
+#define TIM_DIER_UIE ((uint32_t)0x00000001) /*!<Update interrupt enable */
+#define TIM_DIER_CC1IE ((uint32_t)0x00000002) /*!<Capture/Compare 1 interrupt enable */
+#define TIM_DIER_CC2IE ((uint32_t)0x00000004) /*!<Capture/Compare 2 interrupt enable */
+#define TIM_DIER_CC3IE ((uint32_t)0x00000008) /*!<Capture/Compare 3 interrupt enable */
+#define TIM_DIER_CC4IE ((uint32_t)0x00000010) /*!<Capture/Compare 4 interrupt enable */
+#define TIM_DIER_COMIE ((uint32_t)0x00000020) /*!<COM interrupt enable */
+#define TIM_DIER_TIE ((uint32_t)0x00000040) /*!<Trigger interrupt enable */
+#define TIM_DIER_BIE ((uint32_t)0x00000080) /*!<Break interrupt enable */
+#define TIM_DIER_UDE ((uint32_t)0x00000100) /*!<Update DMA request enable */
+#define TIM_DIER_CC1DE ((uint32_t)0x00000200) /*!<Capture/Compare 1 DMA request enable */
+#define TIM_DIER_CC2DE ((uint32_t)0x00000400) /*!<Capture/Compare 2 DMA request enable */
+#define TIM_DIER_CC3DE ((uint32_t)0x00000800) /*!<Capture/Compare 3 DMA request enable */
+#define TIM_DIER_CC4DE ((uint32_t)0x00001000) /*!<Capture/Compare 4 DMA request enable */
+#define TIM_DIER_COMDE ((uint32_t)0x00002000) /*!<COM DMA request enable */
+#define TIM_DIER_TDE ((uint32_t)0x00004000) /*!<Trigger DMA request enable */
+
+/******************** Bit definition for TIM_SR register *******************/
+#define TIM_SR_UIF ((uint32_t)0x00000001) /*!<Update interrupt Flag */
+#define TIM_SR_CC1IF ((uint32_t)0x00000002) /*!<Capture/Compare 1 interrupt Flag */
+#define TIM_SR_CC2IF ((uint32_t)0x00000004) /*!<Capture/Compare 2 interrupt Flag */
+#define TIM_SR_CC3IF ((uint32_t)0x00000008) /*!<Capture/Compare 3 interrupt Flag */
+#define TIM_SR_CC4IF ((uint32_t)0x00000010) /*!<Capture/Compare 4 interrupt Flag */
+#define TIM_SR_COMIF ((uint32_t)0x00000020) /*!<COM interrupt Flag */
+#define TIM_SR_TIF ((uint32_t)0x00000040) /*!<Trigger interrupt Flag */
+#define TIM_SR_BIF ((uint32_t)0x00000080) /*!<Break interrupt Flag */
+#define TIM_SR_CC1OF ((uint32_t)0x00000200) /*!<Capture/Compare 1 Overcapture Flag */
+#define TIM_SR_CC2OF ((uint32_t)0x00000400) /*!<Capture/Compare 2 Overcapture Flag */
+#define TIM_SR_CC3OF ((uint32_t)0x00000800) /*!<Capture/Compare 3 Overcapture Flag */
+#define TIM_SR_CC4OF ((uint32_t)0x00001000) /*!<Capture/Compare 4 Overcapture Flag */
+
+/******************* Bit definition for TIM_EGR register *******************/
+#define TIM_EGR_UG ((uint32_t)0x00000001) /*!<Update Generation */
+#define TIM_EGR_CC1G ((uint32_t)0x00000002) /*!<Capture/Compare 1 Generation */
+#define TIM_EGR_CC2G ((uint32_t)0x00000004) /*!<Capture/Compare 2 Generation */
+#define TIM_EGR_CC3G ((uint32_t)0x00000008) /*!<Capture/Compare 3 Generation */
+#define TIM_EGR_CC4G ((uint32_t)0x00000010) /*!<Capture/Compare 4 Generation */
+#define TIM_EGR_COMG ((uint32_t)0x00000020) /*!<Capture/Compare Control Update Generation */
+#define TIM_EGR_TG ((uint32_t)0x00000040) /*!<Trigger Generation */
+#define TIM_EGR_BG ((uint32_t)0x00000080) /*!<Break Generation */
+
+/****************** Bit definition for TIM_CCMR1 register ******************/
+#define TIM_CCMR1_CC1S ((uint32_t)0x00000003) /*!<CC1S[1:0] bits (Capture/Compare 1 Selection) */
+#define TIM_CCMR1_CC1S_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_CCMR1_CC1S_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC1FE ((uint32_t)0x00000004) /*!<Output Compare 1 Fast enable */
+#define TIM_CCMR1_OC1PE ((uint32_t)0x00000008) /*!<Output Compare 1 Preload enable */
+
+#define TIM_CCMR1_OC1M ((uint32_t)0x00000070) /*!<OC1M[2:0] bits (Output Compare 1 Mode) */
+#define TIM_CCMR1_OC1M_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR1_OC1M_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR1_OC1M_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CCMR1_OC1CE ((uint32_t)0x00000080) /*!<Output Compare 1Clear Enable */
+
+#define TIM_CCMR1_CC2S ((uint32_t)0x00000300) /*!<CC2S[1:0] bits (Capture/Compare 2 Selection) */
+#define TIM_CCMR1_CC2S_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CCMR1_CC2S_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC2FE ((uint32_t)0x00000400) /*!<Output Compare 2 Fast enable */
+#define TIM_CCMR1_OC2PE ((uint32_t)0x00000800) /*!<Output Compare 2 Preload enable */
+
+#define TIM_CCMR1_OC2M ((uint32_t)0x00007000) /*!<OC2M[2:0] bits (Output Compare 2 Mode) */
+#define TIM_CCMR1_OC2M_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR1_OC2M_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR1_OC2M_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+
+#define TIM_CCMR1_OC2CE ((uint32_t)0x00008000) /*!<Output Compare 2 Clear Enable */
+
+/*---------------------------------------------------------------------------*/
+
+#define TIM_CCMR1_IC1PSC ((uint32_t)0x0000000C) /*!<IC1PSC[1:0] bits (Input Capture 1 Prescaler) */
+#define TIM_CCMR1_IC1PSC_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define TIM_CCMR1_IC1PSC_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC1F ((uint32_t)0x000000F0) /*!<IC1F[3:0] bits (Input Capture 1 Filter) */
+#define TIM_CCMR1_IC1F_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR1_IC1F_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR1_IC1F_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define TIM_CCMR1_IC1F_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define TIM_CCMR1_IC2PSC ((uint32_t)0x00000C00) /*!<IC2PSC[1:0] bits (Input Capture 2 Prescaler) */
+#define TIM_CCMR1_IC2PSC_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define TIM_CCMR1_IC2PSC_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC2F ((uint32_t)0x0000F000) /*!<IC2F[3:0] bits (Input Capture 2 Filter) */
+#define TIM_CCMR1_IC2F_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR1_IC2F_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR1_IC2F_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define TIM_CCMR1_IC2F_3 ((uint32_t)0x00008000) /*!<Bit 3 */
+
+/****************** Bit definition for TIM_CCMR2 register ******************/
+#define TIM_CCMR2_CC3S ((uint32_t)0x00000003) /*!<CC3S[1:0] bits (Capture/Compare 3 Selection) */
+#define TIM_CCMR2_CC3S_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_CCMR2_CC3S_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC3FE ((uint32_t)0x00000004) /*!<Output Compare 3 Fast enable */
+#define TIM_CCMR2_OC3PE ((uint32_t)0x00000008) /*!<Output Compare 3 Preload enable */
+
+#define TIM_CCMR2_OC3M ((uint32_t)0x00000070) /*!<OC3M[2:0] bits (Output Compare 3 Mode) */
+#define TIM_CCMR2_OC3M_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR2_OC3M_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR2_OC3M_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CCMR2_OC3CE ((uint32_t)0x00000080) /*!<Output Compare 3 Clear Enable */
+
+#define TIM_CCMR2_CC4S ((uint32_t)0x00000300) /*!<CC4S[1:0] bits (Capture/Compare 4 Selection) */
+#define TIM_CCMR2_CC4S_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CCMR2_CC4S_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC4FE ((uint32_t)0x00000400) /*!<Output Compare 4 Fast enable */
+#define TIM_CCMR2_OC4PE ((uint32_t)0x00000800) /*!<Output Compare 4 Preload enable */
+
+#define TIM_CCMR2_OC4M ((uint32_t)0x00007000) /*!<OC4M[2:0] bits (Output Compare 4 Mode) */
+#define TIM_CCMR2_OC4M_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR2_OC4M_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR2_OC4M_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+
+#define TIM_CCMR2_OC4CE ((uint32_t)0x00008000) /*!<Output Compare 4 Clear Enable */
+
+/*---------------------------------------------------------------------------*/
+
+#define TIM_CCMR2_IC3PSC ((uint32_t)0x0000000C) /*!<IC3PSC[1:0] bits (Input Capture 3 Prescaler) */
+#define TIM_CCMR2_IC3PSC_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define TIM_CCMR2_IC3PSC_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC3F ((uint32_t)0x000000F0) /*!<IC3F[3:0] bits (Input Capture 3 Filter) */
+#define TIM_CCMR2_IC3F_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR2_IC3F_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR2_IC3F_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define TIM_CCMR2_IC3F_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define TIM_CCMR2_IC4PSC ((uint32_t)0x00000C00) /*!<IC4PSC[1:0] bits (Input Capture 4 Prescaler) */
+#define TIM_CCMR2_IC4PSC_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define TIM_CCMR2_IC4PSC_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC4F ((uint32_t)0x0000F000) /*!<IC4F[3:0] bits (Input Capture 4 Filter) */
+#define TIM_CCMR2_IC4F_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR2_IC4F_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR2_IC4F_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define TIM_CCMR2_IC4F_3 ((uint32_t)0x00008000) /*!<Bit 3 */
+
+/******************* Bit definition for TIM_CCER register ******************/
+#define TIM_CCER_CC1E ((uint32_t)0x00000001) /*!<Capture/Compare 1 output enable */
+#define TIM_CCER_CC1P ((uint32_t)0x00000002) /*!<Capture/Compare 1 output Polarity */
+#define TIM_CCER_CC1NE ((uint32_t)0x00000004) /*!<Capture/Compare 1 Complementary output enable */
+#define TIM_CCER_CC1NP ((uint32_t)0x00000008) /*!<Capture/Compare 1 Complementary output Polarity */
+#define TIM_CCER_CC2E ((uint32_t)0x00000010) /*!<Capture/Compare 2 output enable */
+#define TIM_CCER_CC2P ((uint32_t)0x00000020) /*!<Capture/Compare 2 output Polarity */
+#define TIM_CCER_CC2NE ((uint32_t)0x00000040) /*!<Capture/Compare 2 Complementary output enable */
+#define TIM_CCER_CC2NP ((uint32_t)0x00000080) /*!<Capture/Compare 2 Complementary output Polarity */
+#define TIM_CCER_CC3E ((uint32_t)0x00000100) /*!<Capture/Compare 3 output enable */
+#define TIM_CCER_CC3P ((uint32_t)0x00000200) /*!<Capture/Compare 3 output Polarity */
+#define TIM_CCER_CC3NE ((uint32_t)0x00000400) /*!<Capture/Compare 3 Complementary output enable */
+#define TIM_CCER_CC3NP ((uint32_t)0x00000800) /*!<Capture/Compare 3 Complementary output Polarity */
+#define TIM_CCER_CC4E ((uint32_t)0x00001000) /*!<Capture/Compare 4 output enable */
+#define TIM_CCER_CC4P ((uint32_t)0x00002000) /*!<Capture/Compare 4 output Polarity */
+#define TIM_CCER_CC4NP ((uint32_t)0x00008000) /*!<Capture/Compare 4 Complementary output Polarity */
+
+/******************* Bit definition for TIM_CNT register *******************/
+#define TIM_CNT_CNT ((uint32_t)0xFFFFFFFF) /*!<Counter Value */
+
+/******************* Bit definition for TIM_PSC register *******************/
+#define TIM_PSC_PSC ((uint32_t)0x0000FFFF) /*!<Prescaler Value */
+
+/******************* Bit definition for TIM_ARR register *******************/
+#define TIM_ARR_ARR ((uint32_t)0xFFFFFFFF) /*!<actual auto-reload Value */
+
+/******************* Bit definition for TIM_RCR register *******************/
+#define TIM_RCR_REP ((uint32_t)0x000000FF) /*!<Repetition Counter Value */
+
+/******************* Bit definition for TIM_CCR1 register ******************/
+#define TIM_CCR1_CCR1 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 1 Value */
+
+/******************* Bit definition for TIM_CCR2 register ******************/
+#define TIM_CCR2_CCR2 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 2 Value */
+
+/******************* Bit definition for TIM_CCR3 register ******************/
+#define TIM_CCR3_CCR3 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 3 Value */
+
+/******************* Bit definition for TIM_CCR4 register ******************/
+#define TIM_CCR4_CCR4 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 4 Value */
+
+/******************* Bit definition for TIM_BDTR register ******************/
+#define TIM_BDTR_DTG ((uint32_t)0x000000FF) /*!<DTG[0:7] bits (Dead-Time Generator set-up) */
+#define TIM_BDTR_DTG_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_BDTR_DTG_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_BDTR_DTG_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define TIM_BDTR_DTG_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define TIM_BDTR_DTG_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define TIM_BDTR_DTG_5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define TIM_BDTR_DTG_6 ((uint32_t)0x00000040) /*!<Bit 6 */
+#define TIM_BDTR_DTG_7 ((uint32_t)0x00000080) /*!<Bit 7 */
+
+#define TIM_BDTR_LOCK ((uint32_t)0x00000300) /*!<LOCK[1:0] bits (Lock Configuration) */
+#define TIM_BDTR_LOCK_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_BDTR_LOCK_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_BDTR_OSSI ((uint32_t)0x00000400) /*!<Off-State Selection for Idle mode */
+#define TIM_BDTR_OSSR ((uint32_t)0x00000800) /*!<Off-State Selection for Run mode */
+#define TIM_BDTR_BKE ((uint32_t)0x00001000) /*!<Break enable */
+#define TIM_BDTR_BKP ((uint32_t)0x00002000) /*!<Break Polarity */
+#define TIM_BDTR_AOE ((uint32_t)0x00004000) /*!<Automatic Output enable */
+#define TIM_BDTR_MOE ((uint32_t)0x00008000) /*!<Main Output enable */
+
+/******************* Bit definition for TIM_DCR register *******************/
+#define TIM_DCR_DBA ((uint32_t)0x0000001F) /*!<DBA[4:0] bits (DMA Base Address) */
+#define TIM_DCR_DBA_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_DCR_DBA_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_DCR_DBA_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define TIM_DCR_DBA_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define TIM_DCR_DBA_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+
+#define TIM_DCR_DBL ((uint32_t)0x00001F00) /*!<DBL[4:0] bits (DMA Burst Length) */
+#define TIM_DCR_DBL_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_DCR_DBL_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define TIM_DCR_DBL_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define TIM_DCR_DBL_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define TIM_DCR_DBL_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+
+/******************* Bit definition for TIM_DMAR register ******************/
+#define TIM_DMAR_DMAB ((uint32_t)0x0000FFFF) /*!<DMA register for burst accesses */
+
+/******************* Bit definition for TIM14_OR register ********************/
+#define TIM14_OR_TI1_RMP ((uint32_t)0x00000003) /*!<TI1_RMP[1:0] bits (TIM14 Input 4 remap) */
+#define TIM14_OR_TI1_RMP_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM14_OR_TI1_RMP_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+/******************************************************************************/
+/* */
+/* Touch Sensing Controller (TSC) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for TSC_CR register *********************/
+#define TSC_CR_TSCE ((uint32_t)0x00000001) /*!<Touch sensing controller enable */
+#define TSC_CR_START ((uint32_t)0x00000002) /*!<Start acquisition */
+#define TSC_CR_AM ((uint32_t)0x00000004) /*!<Acquisition mode */
+#define TSC_CR_SYNCPOL ((uint32_t)0x00000008) /*!<Synchronization pin polarity */
+#define TSC_CR_IODEF ((uint32_t)0x00000010) /*!<IO default mode */
+
+#define TSC_CR_MCV ((uint32_t)0x000000E0) /*!<MCV[2:0] bits (Max Count Value) */
+#define TSC_CR_MCV_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define TSC_CR_MCV_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+#define TSC_CR_MCV_2 ((uint32_t)0x00000080) /*!<Bit 2 */
+
+#define TSC_CR_PGPSC ((uint32_t)0x00007000) /*!<PGPSC[2:0] bits (Pulse Generator Prescaler) */
+#define TSC_CR_PGPSC_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TSC_CR_PGPSC_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TSC_CR_PGPSC_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+
+#define TSC_CR_SSPSC ((uint32_t)0x00008000) /*!<Spread Spectrum Prescaler */
+#define TSC_CR_SSE ((uint32_t)0x00010000) /*!<Spread Spectrum Enable */
+
+#define TSC_CR_SSD ((uint32_t)0x00FE0000) /*!<SSD[6:0] bits (Spread Spectrum Deviation) */
+#define TSC_CR_SSD_0 ((uint32_t)0x00020000) /*!<Bit 0 */
+#define TSC_CR_SSD_1 ((uint32_t)0x00040000) /*!<Bit 1 */
+#define TSC_CR_SSD_2 ((uint32_t)0x00080000) /*!<Bit 2 */
+#define TSC_CR_SSD_3 ((uint32_t)0x00100000) /*!<Bit 3 */
+#define TSC_CR_SSD_4 ((uint32_t)0x00200000) /*!<Bit 4 */
+#define TSC_CR_SSD_5 ((uint32_t)0x00400000) /*!<Bit 5 */
+#define TSC_CR_SSD_6 ((uint32_t)0x00800000) /*!<Bit 6 */
+
+#define TSC_CR_CTPL ((uint32_t)0x0F000000) /*!<CTPL[3:0] bits (Charge Transfer pulse low) */
+#define TSC_CR_CTPL_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define TSC_CR_CTPL_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define TSC_CR_CTPL_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define TSC_CR_CTPL_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+
+#define TSC_CR_CTPH ((uint32_t)0xF0000000) /*!<CTPH[3:0] bits (Charge Transfer pulse high) */
+#define TSC_CR_CTPH_0 ((uint32_t)0x10000000) /*!<Bit 0 */
+#define TSC_CR_CTPH_1 ((uint32_t)0x20000000) /*!<Bit 1 */
+#define TSC_CR_CTPH_2 ((uint32_t)0x40000000) /*!<Bit 2 */
+#define TSC_CR_CTPH_3 ((uint32_t)0x80000000) /*!<Bit 3 */
+
+/******************* Bit definition for TSC_IER register ********************/
+#define TSC_IER_EOAIE ((uint32_t)0x00000001) /*!<End of acquisition interrupt enable */
+#define TSC_IER_MCEIE ((uint32_t)0x00000002) /*!<Max count error interrupt enable */
+
+/******************* Bit definition for TSC_ICR register ********************/
+#define TSC_ICR_EOAIC ((uint32_t)0x00000001) /*!<End of acquisition interrupt clear */
+#define TSC_ICR_MCEIC ((uint32_t)0x00000002) /*!<Max count error interrupt clear */
+
+/******************* Bit definition for TSC_ISR register ********************/
+#define TSC_ISR_EOAF ((uint32_t)0x00000001) /*!<End of acquisition flag */
+#define TSC_ISR_MCEF ((uint32_t)0x00000002) /*!<Max count error flag */
+
+/******************* Bit definition for TSC_IOHCR register ******************/
+#define TSC_IOHCR_G1_IO1 ((uint32_t)0x00000001) /*!<GROUP1_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G1_IO2 ((uint32_t)0x00000002) /*!<GROUP1_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G1_IO3 ((uint32_t)0x00000004) /*!<GROUP1_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G1_IO4 ((uint32_t)0x00000008) /*!<GROUP1_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G2_IO1 ((uint32_t)0x00000010) /*!<GROUP2_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G2_IO2 ((uint32_t)0x00000020) /*!<GROUP2_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G2_IO3 ((uint32_t)0x00000040) /*!<GROUP2_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G2_IO4 ((uint32_t)0x00000080) /*!<GROUP2_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G3_IO1 ((uint32_t)0x00000100) /*!<GROUP3_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G3_IO2 ((uint32_t)0x00000200) /*!<GROUP3_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G3_IO3 ((uint32_t)0x00000400) /*!<GROUP3_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G3_IO4 ((uint32_t)0x00000800) /*!<GROUP3_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G4_IO1 ((uint32_t)0x00001000) /*!<GROUP4_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G4_IO2 ((uint32_t)0x00002000) /*!<GROUP4_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G4_IO3 ((uint32_t)0x00004000) /*!<GROUP4_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G4_IO4 ((uint32_t)0x00008000) /*!<GROUP4_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G5_IO1 ((uint32_t)0x00010000) /*!<GROUP5_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G5_IO2 ((uint32_t)0x00020000) /*!<GROUP5_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G5_IO3 ((uint32_t)0x00040000) /*!<GROUP5_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G5_IO4 ((uint32_t)0x00080000) /*!<GROUP5_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G6_IO1 ((uint32_t)0x00100000) /*!<GROUP6_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G6_IO2 ((uint32_t)0x00200000) /*!<GROUP6_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G6_IO3 ((uint32_t)0x00400000) /*!<GROUP6_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G6_IO4 ((uint32_t)0x00800000) /*!<GROUP6_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G7_IO1 ((uint32_t)0x01000000) /*!<GROUP7_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G7_IO2 ((uint32_t)0x02000000) /*!<GROUP7_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G7_IO3 ((uint32_t)0x04000000) /*!<GROUP7_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G7_IO4 ((uint32_t)0x08000000) /*!<GROUP7_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G8_IO1 ((uint32_t)0x10000000) /*!<GROUP8_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G8_IO2 ((uint32_t)0x20000000) /*!<GROUP8_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G8_IO3 ((uint32_t)0x40000000) /*!<GROUP8_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G8_IO4 ((uint32_t)0x80000000) /*!<GROUP8_IO4 schmitt trigger hysteresis mode */
+
+/******************* Bit definition for TSC_IOASCR register *****************/
+#define TSC_IOASCR_G1_IO1 ((uint32_t)0x00000001) /*!<GROUP1_IO1 analog switch enable */
+#define TSC_IOASCR_G1_IO2 ((uint32_t)0x00000002) /*!<GROUP1_IO2 analog switch enable */
+#define TSC_IOASCR_G1_IO3 ((uint32_t)0x00000004) /*!<GROUP1_IO3 analog switch enable */
+#define TSC_IOASCR_G1_IO4 ((uint32_t)0x00000008) /*!<GROUP1_IO4 analog switch enable */
+#define TSC_IOASCR_G2_IO1 ((uint32_t)0x00000010) /*!<GROUP2_IO1 analog switch enable */
+#define TSC_IOASCR_G2_IO2 ((uint32_t)0x00000020) /*!<GROUP2_IO2 analog switch enable */
+#define TSC_IOASCR_G2_IO3 ((uint32_t)0x00000040) /*!<GROUP2_IO3 analog switch enable */
+#define TSC_IOASCR_G2_IO4 ((uint32_t)0x00000080) /*!<GROUP2_IO4 analog switch enable */
+#define TSC_IOASCR_G3_IO1 ((uint32_t)0x00000100) /*!<GROUP3_IO1 analog switch enable */
+#define TSC_IOASCR_G3_IO2 ((uint32_t)0x00000200) /*!<GROUP3_IO2 analog switch enable */
+#define TSC_IOASCR_G3_IO3 ((uint32_t)0x00000400) /*!<GROUP3_IO3 analog switch enable */
+#define TSC_IOASCR_G3_IO4 ((uint32_t)0x00000800) /*!<GROUP3_IO4 analog switch enable */
+#define TSC_IOASCR_G4_IO1 ((uint32_t)0x00001000) /*!<GROUP4_IO1 analog switch enable */
+#define TSC_IOASCR_G4_IO2 ((uint32_t)0x00002000) /*!<GROUP4_IO2 analog switch enable */
+#define TSC_IOASCR_G4_IO3 ((uint32_t)0x00004000) /*!<GROUP4_IO3 analog switch enable */
+#define TSC_IOASCR_G4_IO4 ((uint32_t)0x00008000) /*!<GROUP4_IO4 analog switch enable */
+#define TSC_IOASCR_G5_IO1 ((uint32_t)0x00010000) /*!<GROUP5_IO1 analog switch enable */
+#define TSC_IOASCR_G5_IO2 ((uint32_t)0x00020000) /*!<GROUP5_IO2 analog switch enable */
+#define TSC_IOASCR_G5_IO3 ((uint32_t)0x00040000) /*!<GROUP5_IO3 analog switch enable */
+#define TSC_IOASCR_G5_IO4 ((uint32_t)0x00080000) /*!<GROUP5_IO4 analog switch enable */
+#define TSC_IOASCR_G6_IO1 ((uint32_t)0x00100000) /*!<GROUP6_IO1 analog switch enable */
+#define TSC_IOASCR_G6_IO2 ((uint32_t)0x00200000) /*!<GROUP6_IO2 analog switch enable */
+#define TSC_IOASCR_G6_IO3 ((uint32_t)0x00400000) /*!<GROUP6_IO3 analog switch enable */
+#define TSC_IOASCR_G6_IO4 ((uint32_t)0x00800000) /*!<GROUP6_IO4 analog switch enable */
+#define TSC_IOASCR_G7_IO1 ((uint32_t)0x01000000) /*!<GROUP7_IO1 analog switch enable */
+#define TSC_IOASCR_G7_IO2 ((uint32_t)0x02000000) /*!<GROUP7_IO2 analog switch enable */
+#define TSC_IOASCR_G7_IO3 ((uint32_t)0x04000000) /*!<GROUP7_IO3 analog switch enable */
+#define TSC_IOASCR_G7_IO4 ((uint32_t)0x08000000) /*!<GROUP7_IO4 analog switch enable */
+#define TSC_IOASCR_G8_IO1 ((uint32_t)0x10000000) /*!<GROUP8_IO1 analog switch enable */
+#define TSC_IOASCR_G8_IO2 ((uint32_t)0x20000000) /*!<GROUP8_IO2 analog switch enable */
+#define TSC_IOASCR_G8_IO3 ((uint32_t)0x40000000) /*!<GROUP8_IO3 analog switch enable */
+#define TSC_IOASCR_G8_IO4 ((uint32_t)0x80000000) /*!<GROUP8_IO4 analog switch enable */
+
+/******************* Bit definition for TSC_IOSCR register ******************/
+#define TSC_IOSCR_G1_IO1 ((uint32_t)0x00000001) /*!<GROUP1_IO1 sampling mode */
+#define TSC_IOSCR_G1_IO2 ((uint32_t)0x00000002) /*!<GROUP1_IO2 sampling mode */
+#define TSC_IOSCR_G1_IO3 ((uint32_t)0x00000004) /*!<GROUP1_IO3 sampling mode */
+#define TSC_IOSCR_G1_IO4 ((uint32_t)0x00000008) /*!<GROUP1_IO4 sampling mode */
+#define TSC_IOSCR_G2_IO1 ((uint32_t)0x00000010) /*!<GROUP2_IO1 sampling mode */
+#define TSC_IOSCR_G2_IO2 ((uint32_t)0x00000020) /*!<GROUP2_IO2 sampling mode */
+#define TSC_IOSCR_G2_IO3 ((uint32_t)0x00000040) /*!<GROUP2_IO3 sampling mode */
+#define TSC_IOSCR_G2_IO4 ((uint32_t)0x00000080) /*!<GROUP2_IO4 sampling mode */
+#define TSC_IOSCR_G3_IO1 ((uint32_t)0x00000100) /*!<GROUP3_IO1 sampling mode */
+#define TSC_IOSCR_G3_IO2 ((uint32_t)0x00000200) /*!<GROUP3_IO2 sampling mode */
+#define TSC_IOSCR_G3_IO3 ((uint32_t)0x00000400) /*!<GROUP3_IO3 sampling mode */
+#define TSC_IOSCR_G3_IO4 ((uint32_t)0x00000800) /*!<GROUP3_IO4 sampling mode */
+#define TSC_IOSCR_G4_IO1 ((uint32_t)0x00001000) /*!<GROUP4_IO1 sampling mode */
+#define TSC_IOSCR_G4_IO2 ((uint32_t)0x00002000) /*!<GROUP4_IO2 sampling mode */
+#define TSC_IOSCR_G4_IO3 ((uint32_t)0x00004000) /*!<GROUP4_IO3 sampling mode */
+#define TSC_IOSCR_G4_IO4 ((uint32_t)0x00008000) /*!<GROUP4_IO4 sampling mode */
+#define TSC_IOSCR_G5_IO1 ((uint32_t)0x00010000) /*!<GROUP5_IO1 sampling mode */
+#define TSC_IOSCR_G5_IO2 ((uint32_t)0x00020000) /*!<GROUP5_IO2 sampling mode */
+#define TSC_IOSCR_G5_IO3 ((uint32_t)0x00040000) /*!<GROUP5_IO3 sampling mode */
+#define TSC_IOSCR_G5_IO4 ((uint32_t)0x00080000) /*!<GROUP5_IO4 sampling mode */
+#define TSC_IOSCR_G6_IO1 ((uint32_t)0x00100000) /*!<GROUP6_IO1 sampling mode */
+#define TSC_IOSCR_G6_IO2 ((uint32_t)0x00200000) /*!<GROUP6_IO2 sampling mode */
+#define TSC_IOSCR_G6_IO3 ((uint32_t)0x00400000) /*!<GROUP6_IO3 sampling mode */
+#define TSC_IOSCR_G6_IO4 ((uint32_t)0x00800000) /*!<GROUP6_IO4 sampling mode */
+#define TSC_IOSCR_G7_IO1 ((uint32_t)0x01000000) /*!<GROUP7_IO1 sampling mode */
+#define TSC_IOSCR_G7_IO2 ((uint32_t)0x02000000) /*!<GROUP7_IO2 sampling mode */
+#define TSC_IOSCR_G7_IO3 ((uint32_t)0x04000000) /*!<GROUP7_IO3 sampling mode */
+#define TSC_IOSCR_G7_IO4 ((uint32_t)0x08000000) /*!<GROUP7_IO4 sampling mode */
+#define TSC_IOSCR_G8_IO1 ((uint32_t)0x10000000) /*!<GROUP8_IO1 sampling mode */
+#define TSC_IOSCR_G8_IO2 ((uint32_t)0x20000000) /*!<GROUP8_IO2 sampling mode */
+#define TSC_IOSCR_G8_IO3 ((uint32_t)0x40000000) /*!<GROUP8_IO3 sampling mode */
+#define TSC_IOSCR_G8_IO4 ((uint32_t)0x80000000) /*!<GROUP8_IO4 sampling mode */
+
+/******************* Bit definition for TSC_IOCCR register ******************/
+#define TSC_IOCCR_G1_IO1 ((uint32_t)0x00000001) /*!<GROUP1_IO1 channel mode */
+#define TSC_IOCCR_G1_IO2 ((uint32_t)0x00000002) /*!<GROUP1_IO2 channel mode */
+#define TSC_IOCCR_G1_IO3 ((uint32_t)0x00000004) /*!<GROUP1_IO3 channel mode */
+#define TSC_IOCCR_G1_IO4 ((uint32_t)0x00000008) /*!<GROUP1_IO4 channel mode */
+#define TSC_IOCCR_G2_IO1 ((uint32_t)0x00000010) /*!<GROUP2_IO1 channel mode */
+#define TSC_IOCCR_G2_IO2 ((uint32_t)0x00000020) /*!<GROUP2_IO2 channel mode */
+#define TSC_IOCCR_G2_IO3 ((uint32_t)0x00000040) /*!<GROUP2_IO3 channel mode */
+#define TSC_IOCCR_G2_IO4 ((uint32_t)0x00000080) /*!<GROUP2_IO4 channel mode */
+#define TSC_IOCCR_G3_IO1 ((uint32_t)0x00000100) /*!<GROUP3_IO1 channel mode */
+#define TSC_IOCCR_G3_IO2 ((uint32_t)0x00000200) /*!<GROUP3_IO2 channel mode */
+#define TSC_IOCCR_G3_IO3 ((uint32_t)0x00000400) /*!<GROUP3_IO3 channel mode */
+#define TSC_IOCCR_G3_IO4 ((uint32_t)0x00000800) /*!<GROUP3_IO4 channel mode */
+#define TSC_IOCCR_G4_IO1 ((uint32_t)0x00001000) /*!<GROUP4_IO1 channel mode */
+#define TSC_IOCCR_G4_IO2 ((uint32_t)0x00002000) /*!<GROUP4_IO2 channel mode */
+#define TSC_IOCCR_G4_IO3 ((uint32_t)0x00004000) /*!<GROUP4_IO3 channel mode */
+#define TSC_IOCCR_G4_IO4 ((uint32_t)0x00008000) /*!<GROUP4_IO4 channel mode */
+#define TSC_IOCCR_G5_IO1 ((uint32_t)0x00010000) /*!<GROUP5_IO1 channel mode */
+#define TSC_IOCCR_G5_IO2 ((uint32_t)0x00020000) /*!<GROUP5_IO2 channel mode */
+#define TSC_IOCCR_G5_IO3 ((uint32_t)0x00040000) /*!<GROUP5_IO3 channel mode */
+#define TSC_IOCCR_G5_IO4 ((uint32_t)0x00080000) /*!<GROUP5_IO4 channel mode */
+#define TSC_IOCCR_G6_IO1 ((uint32_t)0x00100000) /*!<GROUP6_IO1 channel mode */
+#define TSC_IOCCR_G6_IO2 ((uint32_t)0x00200000) /*!<GROUP6_IO2 channel mode */
+#define TSC_IOCCR_G6_IO3 ((uint32_t)0x00400000) /*!<GROUP6_IO3 channel mode */
+#define TSC_IOCCR_G6_IO4 ((uint32_t)0x00800000) /*!<GROUP6_IO4 channel mode */
+#define TSC_IOCCR_G7_IO1 ((uint32_t)0x01000000) /*!<GROUP7_IO1 channel mode */
+#define TSC_IOCCR_G7_IO2 ((uint32_t)0x02000000) /*!<GROUP7_IO2 channel mode */
+#define TSC_IOCCR_G7_IO3 ((uint32_t)0x04000000) /*!<GROUP7_IO3 channel mode */
+#define TSC_IOCCR_G7_IO4 ((uint32_t)0x08000000) /*!<GROUP7_IO4 channel mode */
+#define TSC_IOCCR_G8_IO1 ((uint32_t)0x10000000) /*!<GROUP8_IO1 channel mode */
+#define TSC_IOCCR_G8_IO2 ((uint32_t)0x20000000) /*!<GROUP8_IO2 channel mode */
+#define TSC_IOCCR_G8_IO3 ((uint32_t)0x40000000) /*!<GROUP8_IO3 channel mode */
+#define TSC_IOCCR_G8_IO4 ((uint32_t)0x80000000) /*!<GROUP8_IO4 channel mode */
+
+/******************* Bit definition for TSC_IOGCSR register *****************/
+#define TSC_IOGCSR_G1E ((uint32_t)0x00000001) /*!<Analog IO GROUP1 enable */
+#define TSC_IOGCSR_G2E ((uint32_t)0x00000002) /*!<Analog IO GROUP2 enable */
+#define TSC_IOGCSR_G3E ((uint32_t)0x00000004) /*!<Analog IO GROUP3 enable */
+#define TSC_IOGCSR_G4E ((uint32_t)0x00000008) /*!<Analog IO GROUP4 enable */
+#define TSC_IOGCSR_G5E ((uint32_t)0x00000010) /*!<Analog IO GROUP5 enable */
+#define TSC_IOGCSR_G6E ((uint32_t)0x00000020) /*!<Analog IO GROUP6 enable */
+#define TSC_IOGCSR_G7E ((uint32_t)0x00000040) /*!<Analog IO GROUP7 enable */
+#define TSC_IOGCSR_G8E ((uint32_t)0x00000080) /*!<Analog IO GROUP8 enable */
+#define TSC_IOGCSR_G1S ((uint32_t)0x00010000) /*!<Analog IO GROUP1 status */
+#define TSC_IOGCSR_G2S ((uint32_t)0x00020000) /*!<Analog IO GROUP2 status */
+#define TSC_IOGCSR_G3S ((uint32_t)0x00040000) /*!<Analog IO GROUP3 status */
+#define TSC_IOGCSR_G4S ((uint32_t)0x00080000) /*!<Analog IO GROUP4 status */
+#define TSC_IOGCSR_G5S ((uint32_t)0x00100000) /*!<Analog IO GROUP5 status */
+#define TSC_IOGCSR_G6S ((uint32_t)0x00200000) /*!<Analog IO GROUP6 status */
+#define TSC_IOGCSR_G7S ((uint32_t)0x00400000) /*!<Analog IO GROUP7 status */
+#define TSC_IOGCSR_G8S ((uint32_t)0x00800000) /*!<Analog IO GROUP8 status */
+
+/******************* Bit definition for TSC_IOGXCR register *****************/
+#define TSC_IOGXCR_CNT ((uint32_t)0x00003FFF) /*!<CNT[13:0] bits (Counter value) */
+
+/******************************************************************************/
+/* */
+/* Universal Synchronous Asynchronous Receiver Transmitter (USART) */
+/* */
+/******************************************************************************/
+/****************** Bit definition for USART_CR1 register *******************/
+#define USART_CR1_UE ((uint32_t)0x00000001) /*!< USART Enable */
+#define USART_CR1_UESM ((uint32_t)0x00000002) /*!< USART Enable in STOP Mode */
+#define USART_CR1_RE ((uint32_t)0x00000004) /*!< Receiver Enable */
+#define USART_CR1_TE ((uint32_t)0x00000008) /*!< Transmitter Enable */
+#define USART_CR1_IDLEIE ((uint32_t)0x00000010) /*!< IDLE Interrupt Enable */
+#define USART_CR1_RXNEIE ((uint32_t)0x00000020) /*!< RXNE Interrupt Enable */
+#define USART_CR1_TCIE ((uint32_t)0x00000040) /*!< Transmission Complete Interrupt Enable */
+#define USART_CR1_TXEIE ((uint32_t)0x00000080) /*!< TXE Interrupt Enable */
+#define USART_CR1_PEIE ((uint32_t)0x00000100) /*!< PE Interrupt Enable */
+#define USART_CR1_PS ((uint32_t)0x00000200) /*!< Parity Selection */
+#define USART_CR1_PCE ((uint32_t)0x00000400) /*!< Parity Control Enable */
+#define USART_CR1_WAKE ((uint32_t)0x00000800) /*!< Receiver Wakeup method */
+#define USART_CR1_M0 ((uint32_t)0x00001000) /*!< Word length bit 0 */
+#define USART_CR1_MME ((uint32_t)0x00002000) /*!< Mute Mode Enable */
+#define USART_CR1_CMIE ((uint32_t)0x00004000) /*!< Character match interrupt enable */
+#define USART_CR1_OVER8 ((uint32_t)0x00008000) /*!< Oversampling by 8-bit or 16-bit mode */
+#define USART_CR1_DEDT ((uint32_t)0x001F0000) /*!< DEDT[4:0] bits (Driver Enable Deassertion Time) */
+#define USART_CR1_DEDT_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define USART_CR1_DEDT_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define USART_CR1_DEDT_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define USART_CR1_DEDT_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+#define USART_CR1_DEDT_4 ((uint32_t)0x00100000) /*!< Bit 4 */
+#define USART_CR1_DEAT ((uint32_t)0x03E00000) /*!< DEAT[4:0] bits (Driver Enable Assertion Time) */
+#define USART_CR1_DEAT_0 ((uint32_t)0x00200000) /*!< Bit 0 */
+#define USART_CR1_DEAT_1 ((uint32_t)0x00400000) /*!< Bit 1 */
+#define USART_CR1_DEAT_2 ((uint32_t)0x00800000) /*!< Bit 2 */
+#define USART_CR1_DEAT_3 ((uint32_t)0x01000000) /*!< Bit 3 */
+#define USART_CR1_DEAT_4 ((uint32_t)0x02000000) /*!< Bit 4 */
+#define USART_CR1_RTOIE ((uint32_t)0x04000000) /*!< Receive Time Out interrupt enable */
+#define USART_CR1_EOBIE ((uint32_t)0x08000000) /*!< End of Block interrupt enable */
+#define USART_CR1_M1 ((uint32_t)0x10000000) /*!< Word length bit 1 */
+#define USART_CR1_M ((uint32_t)0x10001000) /*!< [M1:M0] Word length */
+
+/****************** Bit definition for USART_CR2 register *******************/
+#define USART_CR2_ADDM7 ((uint32_t)0x00000010) /*!< 7-bit or 4-bit Address Detection */
+#define USART_CR2_LBDL ((uint32_t)0x00000020) /*!< LIN Break Detection Length */
+#define USART_CR2_LBDIE ((uint32_t)0x00000040) /*!< LIN Break Detection Interrupt Enable */
+#define USART_CR2_LBCL ((uint32_t)0x00000100) /*!< Last Bit Clock pulse */
+#define USART_CR2_CPHA ((uint32_t)0x00000200) /*!< Clock Phase */
+#define USART_CR2_CPOL ((uint32_t)0x00000400) /*!< Clock Polarity */
+#define USART_CR2_CLKEN ((uint32_t)0x00000800) /*!< Clock Enable */
+#define USART_CR2_STOP ((uint32_t)0x00003000) /*!< STOP[1:0] bits (STOP bits) */
+#define USART_CR2_STOP_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define USART_CR2_STOP_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+#define USART_CR2_LINEN ((uint32_t)0x00004000) /*!< LIN mode enable */
+#define USART_CR2_SWAP ((uint32_t)0x00008000) /*!< SWAP TX/RX pins */
+#define USART_CR2_RXINV ((uint32_t)0x00010000) /*!< RX pin active level inversion */
+#define USART_CR2_TXINV ((uint32_t)0x00020000) /*!< TX pin active level inversion */
+#define USART_CR2_DATAINV ((uint32_t)0x00040000) /*!< Binary data inversion */
+#define USART_CR2_MSBFIRST ((uint32_t)0x00080000) /*!< Most Significant Bit First */
+#define USART_CR2_ABREN ((uint32_t)0x00100000) /*!< Auto Baud-Rate Enable*/
+#define USART_CR2_ABRMODE ((uint32_t)0x00600000) /*!< ABRMOD[1:0] bits (Auto Baud-Rate Mode) */
+#define USART_CR2_ABRMODE_0 ((uint32_t)0x00200000) /*!< Bit 0 */
+#define USART_CR2_ABRMODE_1 ((uint32_t)0x00400000) /*!< Bit 1 */
+#define USART_CR2_RTOEN ((uint32_t)0x00800000) /*!< Receiver Time-Out enable */
+#define USART_CR2_ADD ((uint32_t)0xFF000000) /*!< Address of the USART node */
+
+/****************** Bit definition for USART_CR3 register *******************/
+#define USART_CR3_EIE ((uint32_t)0x00000001) /*!< Error Interrupt Enable */
+#define USART_CR3_IREN ((uint32_t)0x00000002) /*!< IrDA mode Enable */
+#define USART_CR3_IRLP ((uint32_t)0x00000004) /*!< IrDA Low-Power */
+#define USART_CR3_HDSEL ((uint32_t)0x00000008) /*!< Half-Duplex Selection */
+#define USART_CR3_NACK ((uint32_t)0x00000010) /*!< SmartCard NACK enable */
+#define USART_CR3_SCEN ((uint32_t)0x00000020) /*!< SmartCard mode enable */
+#define USART_CR3_DMAR ((uint32_t)0x00000040) /*!< DMA Enable Receiver */
+#define USART_CR3_DMAT ((uint32_t)0x00000080) /*!< DMA Enable Transmitter */
+#define USART_CR3_RTSE ((uint32_t)0x00000100) /*!< RTS Enable */
+#define USART_CR3_CTSE ((uint32_t)0x00000200) /*!< CTS Enable */
+#define USART_CR3_CTSIE ((uint32_t)0x00000400) /*!< CTS Interrupt Enable */
+#define USART_CR3_ONEBIT ((uint32_t)0x00000800) /*!< One sample bit method enable */
+#define USART_CR3_OVRDIS ((uint32_t)0x00001000) /*!< Overrun Disable */
+#define USART_CR3_DDRE ((uint32_t)0x00002000) /*!< DMA Disable on Reception Error */
+#define USART_CR3_DEM ((uint32_t)0x00004000) /*!< Driver Enable Mode */
+#define USART_CR3_DEP ((uint32_t)0x00008000) /*!< Driver Enable Polarity Selection */
+#define USART_CR3_SCARCNT ((uint32_t)0x000E0000) /*!< SCARCNT[2:0] bits (SmartCard Auto-Retry Count) */
+#define USART_CR3_SCARCNT_0 ((uint32_t)0x00020000) /*!< Bit 0 */
+#define USART_CR3_SCARCNT_1 ((uint32_t)0x00040000) /*!< Bit 1 */
+#define USART_CR3_SCARCNT_2 ((uint32_t)0x00080000) /*!< Bit 2 */
+#define USART_CR3_WUS ((uint32_t)0x00300000) /*!< WUS[1:0] bits (Wake UP Interrupt Flag Selection) */
+#define USART_CR3_WUS_0 ((uint32_t)0x00100000) /*!< Bit 0 */
+#define USART_CR3_WUS_1 ((uint32_t)0x00200000) /*!< Bit 1 */
+#define USART_CR3_WUFIE ((uint32_t)0x00400000) /*!< Wake Up Interrupt Enable */
+
+/****************** Bit definition for USART_BRR register *******************/
+#define USART_BRR_DIV_FRACTION ((uint32_t)0x0000000F) /*!< Fraction of USARTDIV */
+#define USART_BRR_DIV_MANTISSA ((uint32_t)0x0000FFF0) /*!< Mantissa of USARTDIV */
+
+/****************** Bit definition for USART_GTPR register ******************/
+#define USART_GTPR_PSC ((uint32_t)0x000000FF) /*!< PSC[7:0] bits (Prescaler value) */
+#define USART_GTPR_GT ((uint32_t)0x0000FF00) /*!< GT[7:0] bits (Guard time value) */
+
+
+/******************* Bit definition for USART_RTOR register *****************/
+#define USART_RTOR_RTO ((uint32_t)0x00FFFFFF) /*!< Receiver Time Out Value */
+#define USART_RTOR_BLEN ((uint32_t)0xFF000000) /*!< Block Length */
+
+/******************* Bit definition for USART_RQR register ******************/
+#define USART_RQR_ABRRQ ((uint32_t)0x00000001) /*!< Auto-Baud Rate Request */
+#define USART_RQR_SBKRQ ((uint32_t)0x00000002) /*!< Send Break Request */
+#define USART_RQR_MMRQ ((uint32_t)0x00000004) /*!< Mute Mode Request */
+#define USART_RQR_RXFRQ ((uint32_t)0x00000008) /*!< Receive Data flush Request */
+#define USART_RQR_TXFRQ ((uint32_t)0x00000010) /*!< Transmit data flush Request */
+
+/******************* Bit definition for USART_ISR register ******************/
+#define USART_ISR_PE ((uint32_t)0x00000001) /*!< Parity Error */
+#define USART_ISR_FE ((uint32_t)0x00000002) /*!< Framing Error */
+#define USART_ISR_NE ((uint32_t)0x00000004) /*!< Noise detected Flag */
+#define USART_ISR_ORE ((uint32_t)0x00000008) /*!< OverRun Error */
+#define USART_ISR_IDLE ((uint32_t)0x00000010) /*!< IDLE line detected */
+#define USART_ISR_RXNE ((uint32_t)0x00000020) /*!< Read Data Register Not Empty */
+#define USART_ISR_TC ((uint32_t)0x00000040) /*!< Transmission Complete */
+#define USART_ISR_TXE ((uint32_t)0x00000080) /*!< Transmit Data Register Empty */
+#define USART_ISR_LBDF ((uint32_t)0x00000100) /*!< LIN Break Detection Flag */
+#define USART_ISR_CTSIF ((uint32_t)0x00000200) /*!< CTS interrupt flag */
+#define USART_ISR_CTS ((uint32_t)0x00000400) /*!< CTS flag */
+#define USART_ISR_RTOF ((uint32_t)0x00000800) /*!< Receiver Time Out */
+#define USART_ISR_EOBF ((uint32_t)0x00001000) /*!< End Of Block Flag */
+#define USART_ISR_ABRE ((uint32_t)0x00004000) /*!< Auto-Baud Rate Error */
+#define USART_ISR_ABRF ((uint32_t)0x00008000) /*!< Auto-Baud Rate Flag */
+#define USART_ISR_BUSY ((uint32_t)0x00010000) /*!< Busy Flag */
+#define USART_ISR_CMF ((uint32_t)0x00020000) /*!< Character Match Flag */
+#define USART_ISR_SBKF ((uint32_t)0x00040000) /*!< Send Break Flag */
+#define USART_ISR_RWU ((uint32_t)0x00080000) /*!< Receive Wake Up from mute mode Flag */
+#define USART_ISR_WUF ((uint32_t)0x00100000) /*!< Wake Up from stop mode Flag */
+#define USART_ISR_TEACK ((uint32_t)0x00200000) /*!< Transmit Enable Acknowledge Flag */
+#define USART_ISR_REACK ((uint32_t)0x00400000) /*!< Receive Enable Acknowledge Flag */
+
+/******************* Bit definition for USART_ICR register ******************/
+#define USART_ICR_PECF ((uint32_t)0x00000001) /*!< Parity Error Clear Flag */
+#define USART_ICR_FECF ((uint32_t)0x00000002) /*!< Framing Error Clear Flag */
+#define USART_ICR_NCF ((uint32_t)0x00000004) /*!< Noise detected Clear Flag */
+#define USART_ICR_ORECF ((uint32_t)0x00000008) /*!< OverRun Error Clear Flag */
+#define USART_ICR_IDLECF ((uint32_t)0x00000010) /*!< IDLE line detected Clear Flag */
+#define USART_ICR_TCCF ((uint32_t)0x00000040) /*!< Transmission Complete Clear Flag */
+#define USART_ICR_LBDCF ((uint32_t)0x00000100) /*!< LIN Break Detection Clear Flag */
+#define USART_ICR_CTSCF ((uint32_t)0x00000200) /*!< CTS Interrupt Clear Flag */
+#define USART_ICR_RTOCF ((uint32_t)0x00000800) /*!< Receiver Time Out Clear Flag */
+#define USART_ICR_EOBCF ((uint32_t)0x00001000) /*!< End Of Block Clear Flag */
+#define USART_ICR_CMCF ((uint32_t)0x00020000) /*!< Character Match Clear Flag */
+#define USART_ICR_WUCF ((uint32_t)0x00100000) /*!< Wake Up from stop mode Clear Flag */
+
+/******************* Bit definition for USART_RDR register ******************/
+#define USART_RDR_RDR ((uint16_t)0x01FF) /*!< RDR[8:0] bits (Receive Data value) */
+
+/******************* Bit definition for USART_TDR register ******************/
+#define USART_TDR_TDR ((uint16_t)0x01FF) /*!< TDR[8:0] bits (Transmit Data value) */
+
+/******************************************************************************/
+/* */
+/* USB Device General registers */
+/* */
+/******************************************************************************/
+#define USB_CNTR (USB_BASE + 0x40) /*!< Control register */
+#define USB_ISTR (USB_BASE + 0x44) /*!< Interrupt status register */
+#define USB_FNR (USB_BASE + 0x48) /*!< Frame number register */
+#define USB_DADDR (USB_BASE + 0x4C) /*!< Device address register */
+#define USB_BTABLE (USB_BASE + 0x50) /*!< Buffer Table address register */
+#define USB_LPMCSR (USB_BASE + 0x54) /*!< LPM Control and Status register */
+#define USB_BCDR (USB_BASE + 0x58) /*!< Battery Charging detector register*/
+
+/**************************** ISTR interrupt events *************************/
+#define USB_ISTR_CTR ((uint16_t)0x8000) /*!< Correct TRansfer (clear-only bit) */
+#define USB_ISTR_PMAOVR ((uint16_t)0x4000) /*!< DMA OVeR/underrun (clear-only bit) */
+#define USB_ISTR_ERR ((uint16_t)0x2000) /*!< ERRor (clear-only bit) */
+#define USB_ISTR_WKUP ((uint16_t)0x1000) /*!< WaKe UP (clear-only bit) */
+#define USB_ISTR_SUSP ((uint16_t)0x0800) /*!< SUSPend (clear-only bit) */
+#define USB_ISTR_RESET ((uint16_t)0x0400) /*!< RESET (clear-only bit) */
+#define USB_ISTR_SOF ((uint16_t)0x0200) /*!< Start Of Frame (clear-only bit) */
+#define USB_ISTR_ESOF ((uint16_t)0x0100) /*!< Expected Start Of Frame (clear-only bit) */
+#define USB_ISTR_L1REQ ((uint16_t)0x0080) /*!< LPM L1 state request */
+#define USB_ISTR_DIR ((uint16_t)0x0010) /*!< DIRection of transaction (read-only bit) */
+#define USB_ISTR_EP_ID ((uint16_t)0x000F) /*!< EndPoint IDentifier (read-only bit) */
+
+#define USB_CLR_CTR (~USB_ISTR_CTR) /*!< clear Correct TRansfer bit */
+#define USB_CLR_PMAOVR (~USB_ISTR_PMAOVR) /*!< clear DMA OVeR/underrun bit*/
+#define USB_CLR_ERR (~USB_ISTR_ERR) /*!< clear ERRor bit */
+#define USB_CLR_WKUP (~USB_ISTR_WKUP) /*!< clear WaKe UP bit */
+#define USB_CLR_SUSP (~USB_ISTR_SUSP) /*!< clear SUSPend bit */
+#define USB_CLR_RESET (~USB_ISTR_RESET) /*!< clear RESET bit */
+#define USB_CLR_SOF (~USB_ISTR_SOF) /*!< clear Start Of Frame bit */
+#define USB_CLR_ESOF (~USB_ISTR_ESOF) /*!< clear Expected Start Of Frame bit */
+#define USB_CLR_L1REQ (~USB_ISTR_L1REQ) /*!< clear LPM L1 bit */
+
+/************************* CNTR control register bits definitions ***********/
+#define USB_CNTR_CTRM ((uint16_t)0x8000) /*!< Correct TRansfer Mask */
+#define USB_CNTR_PMAOVRM ((uint16_t)0x4000) /*!< DMA OVeR/underrun Mask */
+#define USB_CNTR_ERRM ((uint16_t)0x2000) /*!< ERRor Mask */
+#define USB_CNTR_WKUPM ((uint16_t)0x1000) /*!< WaKe UP Mask */
+#define USB_CNTR_SUSPM ((uint16_t)0x0800) /*!< SUSPend Mask */
+#define USB_CNTR_RESETM ((uint16_t)0x0400) /*!< RESET Mask */
+#define USB_CNTR_SOFM ((uint16_t)0x0200) /*!< Start Of Frame Mask */
+#define USB_CNTR_ESOFM ((uint16_t)0x0100) /*!< Expected Start Of Frame Mask */
+#define USB_CNTR_L1REQM ((uint16_t)0x0080) /*!< LPM L1 state request interrupt mask */
+#define USB_CNTR_L1RESUME ((uint16_t)0x0020) /*!< LPM L1 Resume request */
+#define USB_CNTR_RESUME ((uint16_t)0x0010) /*!< RESUME request */
+#define USB_CNTR_FSUSP ((uint16_t)0x0008) /*!< Force SUSPend */
+#define USB_CNTR_LPMODE ((uint16_t)0x0004) /*!< Low-power MODE */
+#define USB_CNTR_PDWN ((uint16_t)0x0002) /*!< Power DoWN */
+#define USB_CNTR_FRES ((uint16_t)0x0001) /*!< Force USB RESet */
+
+/************************* BCDR control register bits definitions ***********/
+#define USB_BCDR_DPPU ((uint16_t)0x8000) /*!< DP Pull-up Enable */
+#define USB_BCDR_PS2DET ((uint16_t)0x0080) /*!< PS2 port or proprietary charger detected */
+#define USB_BCDR_SDET ((uint16_t)0x0040) /*!< Secondary detection (SD) status */
+#define USB_BCDR_PDET ((uint16_t)0x0020) /*!< Primary detection (PD) status */
+#define USB_BCDR_DCDET ((uint16_t)0x0010) /*!< Data contact detection (DCD) status */
+#define USB_BCDR_SDEN ((uint16_t)0x0008) /*!< Secondary detection (SD) mode enable */
+#define USB_BCDR_PDEN ((uint16_t)0x0004) /*!< Primary detection (PD) mode enable */
+#define USB_BCDR_DCDEN ((uint16_t)0x0002) /*!< Data contact detection (DCD) mode enable */
+#define USB_BCDR_BCDEN ((uint16_t)0x0001) /*!< Battery charging detector (BCD) enable */
+
+/*************************** LPM register bits definitions ******************/
+#define USB_LPMCSR_BESL ((uint16_t)0x00F0) /*!< BESL value received with last ACKed LPM Token */
+#define USB_LPMCSR_REMWAKE ((uint16_t)0x0008) /*!< bRemoteWake value received with last ACKed LPM Token */
+#define USB_LPMCSR_LPMACK ((uint16_t)0x0002) /*!< LPM Token acknowledge enable*/
+#define USB_LPMCSR_LMPEN ((uint16_t)0x0001) /*!< LPM support enable */
+
+/******************** FNR Frame Number Register bit definitions ************/
+#define USB_FNR_RXDP ((uint16_t)0x8000) /*!< status of D+ data line */
+#define USB_FNR_RXDM ((uint16_t)0x4000) /*!< status of D- data line */
+#define USB_FNR_LCK ((uint16_t)0x2000) /*!< LoCKed */
+#define USB_FNR_LSOF ((uint16_t)0x1800) /*!< Lost SOF */
+#define USB_FNR_FN ((uint16_t)0x07FF) /*!< Frame Number */
+
+/******************** DADDR Device ADDRess bit definitions ****************/
+#define USB_DADDR_EF ((uint8_t)0x80) /*!< USB device address Enable Function */
+#define USB_DADDR_ADD ((uint8_t)0x7F) /*!< USB device address */
+
+/****************************** Endpoint register *************************/
+#define USB_EP0R USB_BASE /*!< endpoint 0 register address */
+#define USB_EP1R (USB_BASE + 0x04) /*!< endpoint 1 register address */
+#define USB_EP2R (USB_BASE + 0x08) /*!< endpoint 2 register address */
+#define USB_EP3R (USB_BASE + 0x0C) /*!< endpoint 3 register address */
+#define USB_EP4R (USB_BASE + 0x10) /*!< endpoint 4 register address */
+#define USB_EP5R (USB_BASE + 0x14) /*!< endpoint 5 register address */
+#define USB_EP6R (USB_BASE + 0x18) /*!< endpoint 6 register address */
+#define USB_EP7R (USB_BASE + 0x1C) /*!< endpoint 7 register address */
+/* bit positions */
+#define USB_EP_CTR_RX ((uint16_t)0x8000) /*!< EndPoint Correct TRansfer RX */
+#define USB_EP_DTOG_RX ((uint16_t)0x4000) /*!< EndPoint Data TOGGLE RX */
+#define USB_EPRX_STAT ((uint16_t)0x3000) /*!< EndPoint RX STATus bit field */
+#define USB_EP_SETUP ((uint16_t)0x0800) /*!< EndPoint SETUP */
+#define USB_EP_T_FIELD ((uint16_t)0x0600) /*!< EndPoint TYPE */
+#define USB_EP_KIND ((uint16_t)0x0100) /*!< EndPoint KIND */
+#define USB_EP_CTR_TX ((uint16_t)0x0080) /*!< EndPoint Correct TRansfer TX */
+#define USB_EP_DTOG_TX ((uint16_t)0x0040) /*!< EndPoint Data TOGGLE TX */
+#define USB_EPTX_STAT ((uint16_t)0x0030) /*!< EndPoint TX STATus bit field */
+#define USB_EPADDR_FIELD ((uint16_t)0x000F) /*!< EndPoint ADDRess FIELD */
+
+/* EndPoint REGister MASK (no toggle fields) */
+#define USB_EPREG_MASK (USB_EP_CTR_RX|USB_EP_SETUP|USB_EP_T_FIELD|USB_EP_KIND|USB_EP_CTR_TX|USB_EPADDR_FIELD)
+ /*!< EP_TYPE[1:0] EndPoint TYPE */
+#define USB_EP_TYPE_MASK ((uint16_t)0x0600) /*!< EndPoint TYPE Mask */
+#define USB_EP_BULK ((uint16_t)0x0000) /*!< EndPoint BULK */
+#define USB_EP_CONTROL ((uint16_t)0x0200) /*!< EndPoint CONTROL */
+#define USB_EP_ISOCHRONOUS ((uint16_t)0x0400) /*!< EndPoint ISOCHRONOUS */
+#define USB_EP_INTERRUPT ((uint16_t)0x0600) /*!< EndPoint INTERRUPT */
+#define USB_EP_T_MASK (~USB_EP_T_FIELD & USB_EPREG_MASK)
+
+#define USB_EPKIND_MASK (~USB_EP_KIND & USB_EPREG_MASK) /*!< EP_KIND EndPoint KIND */
+ /*!< STAT_TX[1:0] STATus for TX transfer */
+#define USB_EP_TX_DIS ((uint16_t)0x0000) /*!< EndPoint TX DISabled */
+#define USB_EP_TX_STALL ((uint16_t)0x0010) /*!< EndPoint TX STALLed */
+#define USB_EP_TX_NAK ((uint16_t)0x0020) /*!< EndPoint TX NAKed */
+#define USB_EP_TX_VALID ((uint16_t)0x0030) /*!< EndPoint TX VALID */
+#define USB_EPTX_DTOG1 ((uint16_t)0x0010) /*!< EndPoint TX Data TOGgle bit1 */
+#define USB_EPTX_DTOG2 ((uint16_t)0x0020) /*!< EndPoint TX Data TOGgle bit2 */
+#define USB_EPTX_DTOGMASK (USB_EPTX_STAT|USB_EPREG_MASK)
+ /*!< STAT_RX[1:0] STATus for RX transfer */
+#define USB_EP_RX_DIS ((uint16_t)0x0000) /*!< EndPoint RX DISabled */
+#define USB_EP_RX_STALL ((uint16_t)0x1000) /*!< EndPoint RX STALLed */
+#define USB_EP_RX_NAK ((uint16_t)0x2000) /*!< EndPoint RX NAKed */
+#define USB_EP_RX_VALID ((uint16_t)0x3000) /*!< EndPoint RX VALID */
+#define USB_EPRX_DTOG1 ((uint16_t)0x1000) /*!< EndPoint RX Data TOGgle bit1 */
+#define USB_EPRX_DTOG2 ((uint16_t)0x2000) /*!< EndPoint RX Data TOGgle bit1 */
+#define USB_EPRX_DTOGMASK (USB_EPRX_STAT|USB_EPREG_MASK)
+
+/******************************************************************************/
+/* */
+/* Window WATCHDOG (WWDG) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for WWDG_CR register ********************/
+#define WWDG_CR_T ((uint32_t)0x7F) /*!<T[6:0] bits (7-Bit counter (MSB to LSB)) */
+#define WWDG_CR_T0 ((uint32_t)0x01) /*!<Bit 0 */
+#define WWDG_CR_T1 ((uint32_t)0x02) /*!<Bit 1 */
+#define WWDG_CR_T2 ((uint32_t)0x04) /*!<Bit 2 */
+#define WWDG_CR_T3 ((uint32_t)0x08) /*!<Bit 3 */
+#define WWDG_CR_T4 ((uint32_t)0x10) /*!<Bit 4 */
+#define WWDG_CR_T5 ((uint32_t)0x20) /*!<Bit 5 */
+#define WWDG_CR_T6 ((uint32_t)0x40) /*!<Bit 6 */
+
+#define WWDG_CR_WDGA ((uint32_t)0x80) /*!<Activation bit */
+
+/******************* Bit definition for WWDG_CFR register *******************/
+#define WWDG_CFR_W ((uint32_t)0x007F) /*!<W[6:0] bits (7-bit window value) */
+#define WWDG_CFR_W0 ((uint32_t)0x0001) /*!<Bit 0 */
+#define WWDG_CFR_W1 ((uint32_t)0x0002) /*!<Bit 1 */
+#define WWDG_CFR_W2 ((uint32_t)0x0004) /*!<Bit 2 */
+#define WWDG_CFR_W3 ((uint32_t)0x0008) /*!<Bit 3 */
+#define WWDG_CFR_W4 ((uint32_t)0x0010) /*!<Bit 4 */
+#define WWDG_CFR_W5 ((uint32_t)0x0020) /*!<Bit 5 */
+#define WWDG_CFR_W6 ((uint32_t)0x0040) /*!<Bit 6 */
+
+#define WWDG_CFR_WDGTB ((uint32_t)0x0180) /*!<WDGTB[1:0] bits (Timer Base) */
+#define WWDG_CFR_WDGTB0 ((uint32_t)0x0080) /*!<Bit 0 */
+#define WWDG_CFR_WDGTB1 ((uint32_t)0x0100) /*!<Bit 1 */
+
+#define WWDG_CFR_EWI ((uint32_t)0x0200) /*!<Early Wakeup Interrupt */
+
+/******************* Bit definition for WWDG_SR register ********************/
+#define WWDG_SR_EWIF ((uint32_t)0x01) /*!<Early Wakeup Interrupt Flag */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+
+/** @addtogroup Exported_macro
+ * @{
+ */
+
+/****************************** ADC Instances *********************************/
+#define IS_ADC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == ADC1)
+
+#define IS_ADC_COMMON_INSTANCE(INSTANCE) ((INSTANCE) == ADC)
+
+/******************************* CAN Instances ********************************/
+#define IS_CAN_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CAN)
+
+/****************************** CEC Instances *********************************/
+#define IS_CEC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CEC)
+
+/****************************** CRC Instances *********************************/
+#define IS_CRC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CRC)
+
+
+/******************************* DMA Instances ******************************/
+#define IS_DMA_ALL_INSTANCE(INSTANCE) (((INSTANCE) == DMA1_Channel1) || \
+ ((INSTANCE) == DMA1_Channel2) || \
+ ((INSTANCE) == DMA1_Channel3) || \
+ ((INSTANCE) == DMA1_Channel4) || \
+ ((INSTANCE) == DMA1_Channel5))
+
+/****************************** GPIO Instances ********************************/
+#define IS_GPIO_ALL_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB) || \
+ ((INSTANCE) == GPIOC) || \
+ ((INSTANCE) == GPIOF))
+
+#define IS_GPIO_AF_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB) || \
+ ((INSTANCE) == GPIOF))
+
+#define IS_GPIO_LOCK_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB))
+
+/****************************** I2C Instances *********************************/
+#define IS_I2C_ALL_INSTANCE(INSTANCE) ((INSTANCE) == I2C1)
+
+/****************************** I2S Instances *********************************/
+#define IS_I2S_ALL_INSTANCE(INSTANCE) ((INSTANCE) == SPI1)
+
+/****************************** IWDG Instances ********************************/
+#define IS_IWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == IWDG)
+
+/****************************** RTC Instances *********************************/
+#define IS_RTC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == RTC)
+
+/****************************** SMBUS Instances *********************************/
+#define IS_SMBUS_ALL_INSTANCE(INSTANCE) ((INSTANCE) == I2C1)
+
+/****************************** SPI Instances *********************************/
+#define IS_SPI_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
+ ((INSTANCE) == SPI2))
+
+/****************************** TIM Instances *********************************/
+#define IS_TIM_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CC1_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CC2_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CC3_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CC4_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CC5_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1))
+
+#define IS_TIM_CC6_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1))
+
+#define IS_TIM_CLOCK_SELECT_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_TIX_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_ENCODER_INTERFACE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_HALL_INTERFACE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1))
+
+#define IS_TIM_XOR_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_MASTER_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_SLAVE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_32B_COUNTER_INSTANCE(INSTANCE)\
+ ((INSTANCE) == TIM2)
+
+#define IS_TIM_DMABURST_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_BREAK_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CCX_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM2) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM3) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM16) && \
+ (((CHANNEL) == TIM_CHANNEL_1))) \
+ || \
+ (((INSTANCE) == TIM17) && \
+ (((CHANNEL) == TIM_CHANNEL_1))))
+
+#define IS_TIM_CCXN_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3))) \
+ || \
+ (((INSTANCE) == TIM16) && \
+ ((CHANNEL) == TIM_CHANNEL_1)) \
+ || \
+ (((INSTANCE) == TIM17) && \
+ ((CHANNEL) == TIM_CHANNEL_1)))
+
+#define IS_TIM_COUNTER_MODE_SELECT_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_REPETITION_COUNTER_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CLOCK_DIVISION_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_BKIN2_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1))
+
+#define IS_TIM_TRGO2_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1))
+
+#define IS_TIM_DMA_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_DMA_CC_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_COMMUTATION_EVENT_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_REMAP_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM14))
+
+/****************************** TSC Instances *********************************/
+#define IS_TSC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == TSC)
+
+/*********************** UART Instances : IRDA mode ***************************/
+#define IS_IRDA_INSTANCE(INSTANCE) ((INSTANCE) == USART1)
+
+/********************* UART Instances : Smard card mode ***********************/
+#define IS_SMARTCARD_INSTANCE(INSTANCE) ((INSTANCE) == USART1)
+
+/******************** USART Instances : Synchronous mode **********************/
+#define IS_USART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/******************** USART Instances : auto Baud rate detection **************/
+#define IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(INSTANCE) ((INSTANCE) == USART1)
+
+/******************** UART Instances : Asynchronous mode **********************/
+#define IS_UART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/******************** UART Instances : Half-Duplex mode **********************/
+#define IS_UART_HALFDUPLEX_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/****************** UART Instances : Hardware Flow control ********************/
+#define IS_UART_HWFLOW_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/****************** UART Instances : LIN mode ********************/
+#define IS_UART_LIN_INSTANCE(INSTANCE) ((INSTANCE) == USART1)
+
+/****************** UART Instances : wakeup from stop mode ********************/
+#define IS_UART_WAKEUP_INSTANCE(INSTANCE) ((INSTANCE) == USART1)
+
+/****************** UART Instances : Auto Baud Rate detection ********************/
+#define IS_UART_AUTOBAUDRATE_DETECTION_INSTANCE(INSTANCE) ((INSTANCE) == USART1)
+
+/****************** UART Instances : Driver enable detection ********************/
+#define IS_UART_DRIVER_ENABLE_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/****************************** USB Instances ********************************/
+#define IS_USB_ALL_INSTANCE(INSTANCE) ((INSTANCE) == USB)
+
+/****************************** WWDG Instances ********************************/
+#define IS_WWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == WWDG)
+
+/**
+ * @}
+ */
+
+
+/******************************************************************************/
+/* For a painless codes migration between the STM32F0xx device product */
+/* lines, the aliases defined below are put in place to overcome the */
+/* differences in the interrupt handlers and IRQn definitions. */
+/* No need to update developed interrupt code when moving across */
+/* product lines within the same STM32F0 Family */
+/******************************************************************************/
+
+/* Aliases for __IRQn */
+#define PVD_VDDIO2_IRQn VDDIO2_IRQn
+#define RCC_IRQn RCC_CRS_IRQn
+#define DMA1_Channel4_5_6_7_IRQn DMA1_Channel4_5_IRQn
+#define ADC1_COMP_IRQn ADC1_IRQn
+
+/* Aliases for __IRQHandler */
+#define PVD_VDDIO2_IRQHandler VDDIO2_IRQHandler
+#define RCC_IRQHandler RCC_CRS_IRQHandler
+#define DMA1_Channel4_5_6_7_IRQHandler DMA1_Channel4_5_IRQHandler
+#define ADC1_COMP_IRQHandler ADC1_IRQHandler
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F048xx_H */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/include/devices/stm32f051x8.h b/f0/include/devices/stm32f051x8.h
new file mode 100755
index 0000000000000000000000000000000000000000..3724e38b5df9ddc33704298b5862095530cef344
--- /dev/null
+++ b/f0/include/devices/stm32f051x8.h
@@ -0,0 +1,3808 @@
+/**
+ ******************************************************************************
+ * @file stm32f051x8.h
+ * @author MCD Application Team
+ * @version V2.2.1
+ * @date 09-January-2015
+ * @brief CMSIS STM32F051x4/STM32F051x6/STM32F051x8 devices Peripheral Access
+ * Layer Header File.
+ *
+ * This file contains:
+ * - Data structures and the address mapping for all peripherals
+ * - Peripheral's registers declarations and bits definition
+ * - Macros to access peripheral’s registers hardware
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS_Device
+ * @{
+ */
+
+/** @addtogroup stm32f051x8
+ * @{
+ */
+
+#ifndef __STM32F051x8_H
+#define __STM32F051x8_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+
+/**
+ * @brief Configuration of the Cortex-M0 Processor and Core Peripherals
+ */
+#define __CM0_REV 0 /*!< Core Revision r0p0 */
+#define __MPU_PRESENT 0 /*!< STM32F0xx do not provide MPU */
+#define __NVIC_PRIO_BITS 2 /*!< STM32F0xx uses 2 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F051x4/STM32F051x6/STM32F051x8 device Interrupt Number Definition
+ */
+typedef enum
+{
+/****** Cortex-M0 Processor Exceptions Numbers **************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */
+ SVC_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */
+
+/****** STM32F051x4/STM32F051x6/STM32F051x8 specific Interrupt Numbers **************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ PVD_IRQn = 1, /*!< PVD Interrupt through EXTI Lines 16 */
+ RTC_IRQn = 2, /*!< RTC Interrupt through EXTI Lines 17, 19 and 20 */
+ FLASH_IRQn = 3, /*!< FLASH global Interrupt */
+ RCC_IRQn = 4, /*!< RCC global Interrupt */
+ EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupts */
+ EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupts */
+ EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupts */
+ TSC_IRQn = 8, /*!< Touch Sensing Controller Interrupts */
+ DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */
+ DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupts */
+ DMA1_Channel4_5_IRQn = 11, /*!< DMA1 Channel 4 and Channel 5 Interrupts */
+ ADC1_COMP_IRQn = 12, /*!< ADC1 and COMP interrupts (ADC interrupt combined with EXTI Lines 21 and 22 */
+ TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupts */
+ TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 15, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 16, /*!< TIM3 global Interrupt */
+ TIM6_DAC_IRQn = 17, /*!< TIM6 global and DAC channel underrun error Interrupts */
+ TIM14_IRQn = 19, /*!< TIM14 global Interrupt */
+ TIM15_IRQn = 20, /*!< TIM15 global Interrupt */
+ TIM16_IRQn = 21, /*!< TIM16 global Interrupt */
+ TIM17_IRQn = 22, /*!< TIM17 global Interrupt */
+ I2C1_IRQn = 23, /*!< I2C1 Event Interrupt & EXTI Line23 Interrupt (I2C1 wakeup) */
+ I2C2_IRQn = 24, /*!< I2C2 Event Interrupt */
+ SPI1_IRQn = 25, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 26, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 27, /*!< USART1 global Interrupt & EXTI Line25 Interrupt (USART1 wakeup) */
+ USART2_IRQn = 28, /*!< USART2 global Interrupt */
+ CEC_CAN_IRQn = 30 /*!< CEC and CAN global Interrupts & EXTI Line27 Interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm0.h" /* Cortex-M0 processor and core peripherals */
+#include "system_stm32f0xx.h" /* STM32F0xx System Header */
+#include <stdint.h>
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< ADC Interrupt and Status register, Address offset:0x00 */
+ __IO uint32_t IER; /*!< ADC Interrupt Enable register, Address offset:0x04 */
+ __IO uint32_t CR; /*!< ADC Control register, Address offset:0x08 */
+ __IO uint32_t CFGR1; /*!< ADC Configuration register 1, Address offset:0x0C */
+ __IO uint32_t CFGR2; /*!< ADC Configuration register 2, Address offset:0x10 */
+ __IO uint32_t SMPR; /*!< ADC Sampling time register, Address offset:0x14 */
+ uint32_t RESERVED1; /*!< Reserved, 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, 0x1C */
+ __IO uint32_t TR; /*!< ADC watchdog threshold register, Address offset:0x20 */
+ uint32_t RESERVED3; /*!< Reserved, 0x24 */
+ __IO uint32_t CHSELR; /*!< ADC channel selection register, Address offset:0x28 */
+ uint32_t RESERVED4[5]; /*!< Reserved, 0x2C */
+ __IO uint32_t DR; /*!< ADC data register, Address offset:0x40 */
+}ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CCR;
+}ADC_Common_TypeDef;
+
+/**
+ * @brief HDMI-CEC
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< CEC control register, Address offset:0x00 */
+ __IO uint32_t CFGR; /*!< CEC configuration register, Address offset:0x04 */
+ __IO uint32_t TXDR; /*!< CEC Tx data register , Address offset:0x08 */
+ __IO uint32_t RXDR; /*!< CEC Rx Data Register, Address offset:0x0C */
+ __IO uint32_t ISR; /*!< CEC Interrupt and Status Register, Address offset:0x10 */
+ __IO uint32_t IER; /*!< CEC interrupt enable register, Address offset:0x14 */
+}CEC_TypeDef;
+
+/**
+ * @brief Comparator
+ */
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< Comparator 1 & 2 control Status register, Address offset: 0x00 */
+}COMP1_2_TypeDef;
+
+typedef struct
+{
+ __IO uint16_t CSR; /*!< Comparator control Status register, Address offset: 0x00 */
+}COMP_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+ uint32_t RESERVED2; /*!< Reserved, 0x0C */
+ __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */
+ __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */
+}CRC_TypeDef;
+
+/**
+ * @brief Digital to Analog Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */
+ __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */
+ __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */
+ __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */
+ __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */
+ __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */
+ __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */
+}DAC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< DMA channel x configuration register */
+ __IO uint32_t CNDTR; /*!< DMA channel x number of data register */
+ __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */
+ __IO uint32_t CMAR; /*!< DMA channel x memory address register */
+}DMA_Channel_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */
+ __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */
+}DMA_TypeDef;
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!<EXTI Interrupt mask register, Address offset: 0x00 */
+ __IO uint32_t EMR; /*!<EXTI Event mask register, Address offset: 0x04 */
+ __IO uint32_t RTSR; /*!<EXTI Rising trigger selection register , Address offset: 0x08 */
+ __IO uint32_t FTSR; /*!<EXTI Falling trigger selection register, Address offset: 0x0C */
+ __IO uint32_t SWIER; /*!<EXTI Software interrupt event register, Address offset: 0x10 */
+ __IO uint32_t PR; /*!<EXTI Pending register, Address offset: 0x14 */
+}EXTI_TypeDef;
+
+/**
+ * @brief FLASH Registers
+ */
+typedef struct
+{
+ __IO uint32_t ACR; /*!<FLASH access control register, Address offset: 0x00 */
+ __IO uint32_t KEYR; /*!<FLASH key register, Address offset: 0x04 */
+ __IO uint32_t OPTKEYR; /*!<FLASH OPT key register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!<FLASH status register, Address offset: 0x0C */
+ __IO uint32_t CR; /*!<FLASH control register, Address offset: 0x10 */
+ __IO uint32_t AR; /*!<FLASH address register, Address offset: 0x14 */
+ __IO uint32_t RESERVED; /*!< Reserved, 0x18 */
+ __IO uint32_t OBR; /*!<FLASH option bytes register, Address offset: 0x1C */
+ __IO uint32_t WRPR; /*!<FLASH option bytes register, Address offset: 0x20 */
+}FLASH_TypeDef;
+
+
+/**
+ * @brief Option Bytes Registers
+ */
+typedef struct
+{
+ __IO uint16_t RDP; /*!< FLASH option byte Read protection, Address offset: 0x00 */
+ __IO uint16_t USER; /*!< FLASH option byte user options, Address offset: 0x02 */
+ __IO uint16_t DATA0; /*!< User data byte 0 (stored in FLASH_OBR[23:16]), Address offset: 0x04 */
+ __IO uint16_t DATA1; /*!< User data byte 1 (stored in FLASH_OBR[31:24]), Address offset: 0x06 */
+ __IO uint16_t WRP0; /*!< FLASH option byte write protection 0, Address offset: 0x08 */
+ __IO uint16_t WRP1; /*!< FLASH option byte write protection 1, Address offset: 0x0A */
+ __IO uint16_t WRP2; /*!< FLASH option byte write protection 2, Address offset: 0x0C */
+ __IO uint16_t WRP3; /*!< FLASH option byte write protection 3, Address offset: 0x0E */
+}OB_TypeDef;
+
+/**
+ * @brief General Purpose I/O
+ */
+
+typedef struct
+{
+ __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */
+ __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */
+ __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */
+ __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */
+ __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */
+ __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */
+ __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x1A */
+ __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */
+ __IO uint32_t AFR[2]; /*!< GPIO alternate function low register, Address offset: 0x20-0x24 */
+ __IO uint32_t BRR; /*!< GPIO bit reset register, Address offset: 0x28 */
+}GPIO_TypeDef;
+
+/**
+ * @brief SysTem Configuration
+ */
+
+typedef struct
+{
+ __IO uint32_t CFGR1; /*!< SYSCFG configuration register 1, Address offset: 0x00 */
+ uint32_t RESERVED; /*!< Reserved, 0x04 */
+ __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration register, Address offset: 0x14-0x08 */
+ __IO uint32_t CFGR2; /*!< SYSCFG configuration register 2, Address offset: 0x18 */
+}SYSCFG_TypeDef;
+
+/**
+ * @brief Inter-integrated Circuit Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */
+ __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */
+ __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */
+ __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */
+ __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */
+ __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */
+ __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */
+ __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */
+ __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */
+ __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */
+}I2C_TypeDef;
+
+/**
+ * @brief Independent WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */
+ __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */
+ __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */
+ __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */
+}IWDG_TypeDef;
+
+/**
+ * @brief Power Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< PWR power control register, Address offset: 0x00 */
+ __IO uint32_t CSR; /*!< PWR power control/status register, Address offset: 0x04 */
+}PWR_TypeDef;
+
+/**
+ * @brief Reset and Clock Control
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */
+ __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x04 */
+ __IO uint32_t CIR; /*!< RCC clock interrupt register, Address offset: 0x08 */
+ __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x0C */
+ __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x10 */
+ __IO uint32_t AHBENR; /*!< RCC AHB peripheral clock register, Address offset: 0x14 */
+ __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x18 */
+ __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x1C */
+ __IO uint32_t BDCR; /*!< RCC Backup domain control register, Address offset: 0x20 */
+ __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x24 */
+ __IO uint32_t AHBRSTR; /*!< RCC AHB peripheral reset register, Address offset: 0x28 */
+ __IO uint32_t CFGR2; /*!< RCC clock configuration register 2, Address offset: 0x2C */
+ __IO uint32_t CFGR3; /*!< RCC clock configuration register 3, Address offset: 0x30 */
+ __IO uint32_t CR2; /*!< RCC clock control register 2, Address offset: 0x34 */
+}RCC_TypeDef;
+
+/**
+ * @brief Real-Time Clock
+ */
+
+typedef struct
+{
+ __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */
+ __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */
+ uint32_t RESERVED1; /*!< Reserved, Address offset: 0x14 */
+ uint32_t RESERVED2; /*!< Reserved, Address offset: 0x18 */
+ __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */
+ uint32_t RESERVED3; /*!< Reserved, Address offset: 0x20 */
+ __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */
+ __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */
+ __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */
+ __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */
+ __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */
+ __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */
+ __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */
+ __IO uint32_t TAFCR; /*!< RTC tamper and alternate function configuration register, Address offset: 0x40 */
+ __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */
+ uint32_t RESERVED4; /*!< Reserved, Address offset: 0x48 */
+ uint32_t RESERVED5; /*!< Reserved, Address offset: 0x4C */
+ __IO uint32_t BKP0R; /*!< RTC backup register 0, Address offset: 0x50 */
+ __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */
+ __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */
+ __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */
+ __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */
+}RTC_TypeDef;
+
+/**
+ * @brief Serial Peripheral Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< SPI Control register 1 (not used in I2S mode), Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */
+ __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */
+ __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */
+ __IO uint32_t RXCRCR; /*!< SPI Rx CRC register (not used in I2S mode), Address offset: 0x14 */
+ __IO uint32_t TXCRCR; /*!< SPI Tx CRC register (not used in I2S mode), Address offset: 0x18 */
+ __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */
+ __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */
+}SPI_TypeDef;
+
+/**
+ * @brief TIM
+ */
+typedef struct
+{
+ __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */
+ __IO uint32_t SMCR; /*!< TIM slave Mode Control register, Address offset: 0x08 */
+ __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */
+ __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */
+ __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */
+ __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */
+ __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */
+ __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */
+ __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */
+ __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */
+ __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */
+ __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */
+ __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */
+ __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */
+ __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */
+ __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */
+ __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */
+ __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */
+ __IO uint32_t DMAR; /*!< TIM DMA address for full transfer register, Address offset: 0x4C */
+ __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */
+}TIM_TypeDef;
+
+/**
+ * @brief Touch Sensing Controller (TSC)
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< TSC control register, Address offset: 0x00 */
+ __IO uint32_t IER; /*!< TSC interrupt enable register, Address offset: 0x04 */
+ __IO uint32_t ICR; /*!< TSC interrupt clear register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< TSC interrupt status register, Address offset: 0x0C */
+ __IO uint32_t IOHCR; /*!< TSC I/O hysteresis control register, Address offset: 0x10 */
+ uint32_t RESERVED1; /*!< Reserved, Address offset: 0x14 */
+ __IO uint32_t IOASCR; /*!< TSC I/O analog switch control register, Address offset: 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, Address offset: 0x1C */
+ __IO uint32_t IOSCR; /*!< TSC I/O sampling control register, Address offset: 0x20 */
+ uint32_t RESERVED3; /*!< Reserved, Address offset: 0x24 */
+ __IO uint32_t IOCCR; /*!< TSC I/O channel control register, Address offset: 0x28 */
+ uint32_t RESERVED4; /*!< Reserved, Address offset: 0x2C */
+ __IO uint32_t IOGCSR; /*!< TSC I/O group control status register, Address offset: 0x30 */
+ __IO uint32_t IOGXCR[8]; /*!< TSC I/O group x counter register, Address offset: 0x34-50 */
+}TSC_TypeDef;
+
+/**
+ * @brief Universal Synchronous Asynchronous Receiver Transmitter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */
+ __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */
+ __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */
+ __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */
+ __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */
+ __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */
+ __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */
+ __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */
+ __IO uint16_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */
+ uint16_t RESERVED1; /*!< Reserved, 0x26 */
+ __IO uint16_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */
+ uint16_t RESERVED2; /*!< Reserved, 0x2A */
+}USART_TypeDef;
+
+/**
+ * @brief Window WATCHDOG
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */
+ __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */
+}WWDG_TypeDef;
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_memory_map
+ * @{
+ */
+
+#define FLASH_BASE ((uint32_t)0x08000000) /*!< FLASH base address in the alias region */
+#define SRAM_BASE ((uint32_t)0x20000000) /*!< SRAM base address in the alias region */
+#define PERIPH_BASE ((uint32_t)0x40000000) /*!< Peripheral base address in the alias region */
+
+/*!< Peripheral memory map */
+#define APBPERIPH_BASE PERIPH_BASE
+#define AHBPERIPH_BASE (PERIPH_BASE + 0x00020000)
+#define AHB2PERIPH_BASE (PERIPH_BASE + 0x08000000)
+
+#define TIM2_BASE (APBPERIPH_BASE + 0x00000000)
+#define TIM3_BASE (APBPERIPH_BASE + 0x00000400)
+#define TIM6_BASE (APBPERIPH_BASE + 0x00001000)
+#define TIM14_BASE (APBPERIPH_BASE + 0x00002000)
+#define RTC_BASE (APBPERIPH_BASE + 0x00002800)
+#define WWDG_BASE (APBPERIPH_BASE + 0x00002C00)
+#define IWDG_BASE (APBPERIPH_BASE + 0x00003000)
+#define SPI2_BASE (APBPERIPH_BASE + 0x00003800)
+#define USART2_BASE (APBPERIPH_BASE + 0x00004400)
+#define I2C1_BASE (APBPERIPH_BASE + 0x00005400)
+#define I2C2_BASE (APBPERIPH_BASE + 0x00005800)
+#define PWR_BASE (APBPERIPH_BASE + 0x00007000)
+#define DAC_BASE (APBPERIPH_BASE + 0x00007400)
+#define CEC_BASE (APBPERIPH_BASE + 0x00007800)
+
+#define SYSCFG_BASE (APBPERIPH_BASE + 0x00010000)
+#define COMP_BASE (APBPERIPH_BASE + 0x0001001C)
+#define EXTI_BASE (APBPERIPH_BASE + 0x00010400)
+#define ADC1_BASE (APBPERIPH_BASE + 0x00012400)
+#define ADC_BASE (APBPERIPH_BASE + 0x00012708)
+#define TIM1_BASE (APBPERIPH_BASE + 0x00012C00)
+#define SPI1_BASE (APBPERIPH_BASE + 0x00013000)
+#define USART1_BASE (APBPERIPH_BASE + 0x00013800)
+#define TIM15_BASE (APBPERIPH_BASE + 0x00014000)
+#define TIM16_BASE (APBPERIPH_BASE + 0x00014400)
+#define TIM17_BASE (APBPERIPH_BASE + 0x00014800)
+#define DBGMCU_BASE (APBPERIPH_BASE + 0x00015800)
+
+#define DMA1_BASE (AHBPERIPH_BASE + 0x00000000)
+#define DMA1_Channel1_BASE (DMA1_BASE + 0x00000008)
+#define DMA1_Channel2_BASE (DMA1_BASE + 0x0000001C)
+#define DMA1_Channel3_BASE (DMA1_BASE + 0x00000030)
+#define DMA1_Channel4_BASE (DMA1_BASE + 0x00000044)
+#define DMA1_Channel5_BASE (DMA1_BASE + 0x00000058)
+
+#define RCC_BASE (AHBPERIPH_BASE + 0x00001000)
+#define FLASH_R_BASE (AHBPERIPH_BASE + 0x00002000) /*!< FLASH registers base address */
+#define OB_BASE ((uint32_t)0x1FFFF800) /*!< FLASH Option Bytes base address */
+#define CRC_BASE (AHBPERIPH_BASE + 0x00003000)
+#define TSC_BASE (AHBPERIPH_BASE + 0x00004000)
+
+#define GPIOA_BASE (AHB2PERIPH_BASE + 0x00000000)
+#define GPIOB_BASE (AHB2PERIPH_BASE + 0x00000400)
+#define GPIOC_BASE (AHB2PERIPH_BASE + 0x00000800)
+#define GPIOD_BASE (AHB2PERIPH_BASE + 0x00000C00)
+#define GPIOF_BASE (AHB2PERIPH_BASE + 0x00001400)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_declaration
+ * @{
+ */
+
+#define TIM2 ((TIM_TypeDef *) TIM2_BASE)
+#define TIM3 ((TIM_TypeDef *) TIM3_BASE)
+#define TIM6 ((TIM_TypeDef *) TIM6_BASE)
+#define TIM14 ((TIM_TypeDef *) TIM14_BASE)
+#define RTC ((RTC_TypeDef *) RTC_BASE)
+#define WWDG ((WWDG_TypeDef *) WWDG_BASE)
+#define IWDG ((IWDG_TypeDef *) IWDG_BASE)
+#define SPI2 ((SPI_TypeDef *) SPI2_BASE)
+#define USART2 ((USART_TypeDef *) USART2_BASE)
+#define I2C1 ((I2C_TypeDef *) I2C1_BASE)
+#define I2C2 ((I2C_TypeDef *) I2C2_BASE)
+#define PWR ((PWR_TypeDef *) PWR_BASE)
+#define DAC ((DAC_TypeDef *) DAC_BASE)
+#define CEC ((CEC_TypeDef *) CEC_BASE)
+#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE)
+#define COMP ((COMP1_2_TypeDef *) COMP_BASE)
+#define COMP1 ((COMP_TypeDef *) COMP_BASE)
+#define COMP2 ((COMP_TypeDef *) (COMP_BASE + 0x00000002))
+#define EXTI ((EXTI_TypeDef *) EXTI_BASE)
+#define ADC1 ((ADC_TypeDef *) ADC1_BASE)
+#define ADC ((ADC_Common_TypeDef *) ADC_BASE)
+#define TIM1 ((TIM_TypeDef *) TIM1_BASE)
+#define SPI1 ((SPI_TypeDef *) SPI1_BASE)
+#define USART1 ((USART_TypeDef *) USART1_BASE)
+#define TIM15 ((TIM_TypeDef *) TIM15_BASE)
+#define TIM16 ((TIM_TypeDef *) TIM16_BASE)
+#define TIM17 ((TIM_TypeDef *) TIM17_BASE)
+#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE)
+#define DMA1 ((DMA_TypeDef *) DMA1_BASE)
+#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE)
+#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE)
+#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE)
+#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE)
+#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE)
+#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE)
+#define OB ((OB_TypeDef *) OB_BASE)
+#define RCC ((RCC_TypeDef *) RCC_BASE)
+#define CRC ((CRC_TypeDef *) CRC_BASE)
+#define TSC ((TSC_TypeDef *) TSC_BASE)
+#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE)
+#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE)
+#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE)
+#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE)
+#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_constants
+ * @{
+ */
+
+ /** @addtogroup Peripheral_Registers_Bits_Definition
+ * @{
+ */
+
+/******************************************************************************/
+/* Peripheral Registers Bits Definition */
+/******************************************************************************/
+/******************************************************************************/
+/* */
+/* Analog to Digital Converter (ADC) */
+/* */
+/******************************************************************************/
+/******************** Bits definition for ADC_ISR register ******************/
+#define ADC_ISR_AWD ((uint32_t)0x00000080) /*!< Analog watchdog flag */
+#define ADC_ISR_OVR ((uint32_t)0x00000010) /*!< Overrun flag */
+#define ADC_ISR_EOSEQ ((uint32_t)0x00000008) /*!< End of Sequence flag */
+#define ADC_ISR_EOC ((uint32_t)0x00000004) /*!< End of Conversion */
+#define ADC_ISR_EOSMP ((uint32_t)0x00000002) /*!< End of sampling flag */
+#define ADC_ISR_ADRDY ((uint32_t)0x00000001) /*!< ADC Ready */
+
+/* Old EOSEQ bit definition, maintained for legacy purpose */
+#define ADC_ISR_EOS ADC_ISR_EOSEQ
+
+/******************** Bits definition for ADC_IER register ******************/
+#define ADC_IER_AWDIE ((uint32_t)0x00000080) /*!< Analog Watchdog interrupt enable */
+#define ADC_IER_OVRIE ((uint32_t)0x00000010) /*!< Overrun interrupt enable */
+#define ADC_IER_EOSEQIE ((uint32_t)0x00000008) /*!< End of Sequence of conversion interrupt enable */
+#define ADC_IER_EOCIE ((uint32_t)0x00000004) /*!< End of Conversion interrupt enable */
+#define ADC_IER_EOSMPIE ((uint32_t)0x00000002) /*!< End of sampling interrupt enable */
+#define ADC_IER_ADRDYIE ((uint32_t)0x00000001) /*!< ADC Ready interrupt enable */
+
+/* Old EOSEQIE bit definition, maintained for legacy purpose */
+#define ADC_IER_EOSIE ADC_IER_EOSEQIE
+
+/******************** Bits definition for ADC_CR register *******************/
+#define ADC_CR_ADCAL ((uint32_t)0x80000000) /*!< ADC calibration */
+#define ADC_CR_ADSTP ((uint32_t)0x00000010) /*!< ADC stop of conversion command */
+#define ADC_CR_ADSTART ((uint32_t)0x00000004) /*!< ADC start of conversion */
+#define ADC_CR_ADDIS ((uint32_t)0x00000002) /*!< ADC disable command */
+#define ADC_CR_ADEN ((uint32_t)0x00000001) /*!< ADC enable control */
+
+/******************* Bits definition for ADC_CFGR1 register *****************/
+#define ADC_CFGR1_AWDCH ((uint32_t)0x7C000000) /*!< AWDCH[4:0] bits (Analog watchdog channel select bits) */
+#define ADC_CFGR1_AWDCH_0 ((uint32_t)0x04000000) /*!< Bit 0 */
+#define ADC_CFGR1_AWDCH_1 ((uint32_t)0x08000000) /*!< Bit 1 */
+#define ADC_CFGR1_AWDCH_2 ((uint32_t)0x10000000) /*!< Bit 2 */
+#define ADC_CFGR1_AWDCH_3 ((uint32_t)0x20000000) /*!< Bit 3 */
+#define ADC_CFGR1_AWDCH_4 ((uint32_t)0x40000000) /*!< Bit 4 */
+#define ADC_CFGR1_AWDEN ((uint32_t)0x00800000) /*!< Analog watchdog enable on regular channels */
+#define ADC_CFGR1_AWDSGL ((uint32_t)0x00400000) /*!< Enable the watchdog on a single channel or on all channels */
+#define ADC_CFGR1_DISCEN ((uint32_t)0x00010000) /*!< Discontinuous mode on regular channels */
+#define ADC_CFGR1_AUTOFF ((uint32_t)0x00008000) /*!< ADC auto power off */
+#define ADC_CFGR1_WAIT ((uint32_t)0x00004000) /*!< ADC wait conversion mode */
+#define ADC_CFGR1_CONT ((uint32_t)0x00002000) /*!< Continuous Conversion */
+#define ADC_CFGR1_OVRMOD ((uint32_t)0x00001000) /*!< Overrun mode */
+#define ADC_CFGR1_EXTEN ((uint32_t)0x00000C00) /*!< EXTEN[1:0] bits (External Trigger Conversion mode for regular channels) */
+#define ADC_CFGR1_EXTEN_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define ADC_CFGR1_EXTEN_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define ADC_CFGR1_EXTSEL ((uint32_t)0x000001C0) /*!< EXTSEL[2:0] bits (External Event Select for regular group) */
+#define ADC_CFGR1_EXTSEL_0 ((uint32_t)0x00000040) /*!< Bit 0 */
+#define ADC_CFGR1_EXTSEL_1 ((uint32_t)0x00000080) /*!< Bit 1 */
+#define ADC_CFGR1_EXTSEL_2 ((uint32_t)0x00000100) /*!< Bit 2 */
+#define ADC_CFGR1_ALIGN ((uint32_t)0x00000020) /*!< Data Alignment */
+#define ADC_CFGR1_RES ((uint32_t)0x00000018) /*!< RES[1:0] bits (Resolution) */
+#define ADC_CFGR1_RES_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define ADC_CFGR1_RES_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define ADC_CFGR1_SCANDIR ((uint32_t)0x00000004) /*!< Sequence scan direction */
+#define ADC_CFGR1_DMACFG ((uint32_t)0x00000002) /*!< Direct memory access configuration */
+#define ADC_CFGR1_DMAEN ((uint32_t)0x00000001) /*!< Direct memory access enable */
+
+/* Old WAIT bit definition, maintained for legacy purpose */
+#define ADC_CFGR1_AUTDLY ADC_CFGR1_WAIT
+
+/******************* Bits definition for ADC_CFGR2 register *****************/
+#define ADC_CFGR2_CKMODE ((uint32_t)0xC0000000) /*!< ADC clock mode */
+#define ADC_CFGR2_CKMODE_1 ((uint32_t)0x80000000) /*!< ADC clocked by PCLK div4 */
+#define ADC_CFGR2_CKMODE_0 ((uint32_t)0x40000000) /*!< ADC clocked by PCLK div2 */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_CFGR2_JITOFFDIV4 ADC_CFGR2_CKMODE_1 /*!< ADC clocked by PCLK div4 */
+#define ADC_CFGR2_JITOFFDIV2 ADC_CFGR2_CKMODE_0 /*!< ADC clocked by PCLK div2 */
+
+/****************** Bit definition for ADC_SMPR register ********************/
+#define ADC_SMPR_SMP ((uint32_t)0x00000007) /*!< SMP[2:0] bits (Sampling time selection) */
+#define ADC_SMPR_SMP_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define ADC_SMPR_SMP_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define ADC_SMPR_SMP_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_SMPR1_SMPR ADC_SMPR_SMP /*!< SMP[2:0] bits (Sampling time selection) */
+#define ADC_SMPR1_SMPR_0 ADC_SMPR_SMP_0 /*!< Bit 0 */
+#define ADC_SMPR1_SMPR_1 ADC_SMPR_SMP_1 /*!< Bit 1 */
+#define ADC_SMPR1_SMPR_2 ADC_SMPR_SMP_2 /*!< Bit 2 */
+
+/******************* Bit definition for ADC_TR register ********************/
+#define ADC_TR_HT ((uint32_t)0x0FFF0000) /*!< Analog watchdog high threshold */
+#define ADC_TR_LT ((uint32_t)0x00000FFF) /*!< Analog watchdog low threshold */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_HTR_HT ADC_TR_HT /*!< Analog watchdog high threshold */
+#define ADC_LTR_LT ADC_TR_LT /*!< Analog watchdog low threshold */
+
+/****************** Bit definition for ADC_CHSELR register ******************/
+#define ADC_CHSELR_CHSEL18 ((uint32_t)0x00040000) /*!< Channel 18 selection */
+#define ADC_CHSELR_CHSEL17 ((uint32_t)0x00020000) /*!< Channel 17 selection */
+#define ADC_CHSELR_CHSEL16 ((uint32_t)0x00010000) /*!< Channel 16 selection */
+#define ADC_CHSELR_CHSEL15 ((uint32_t)0x00008000) /*!< Channel 15 selection */
+#define ADC_CHSELR_CHSEL14 ((uint32_t)0x00004000) /*!< Channel 14 selection */
+#define ADC_CHSELR_CHSEL13 ((uint32_t)0x00002000) /*!< Channel 13 selection */
+#define ADC_CHSELR_CHSEL12 ((uint32_t)0x00001000) /*!< Channel 12 selection */
+#define ADC_CHSELR_CHSEL11 ((uint32_t)0x00000800) /*!< Channel 11 selection */
+#define ADC_CHSELR_CHSEL10 ((uint32_t)0x00000400) /*!< Channel 10 selection */
+#define ADC_CHSELR_CHSEL9 ((uint32_t)0x00000200) /*!< Channel 9 selection */
+#define ADC_CHSELR_CHSEL8 ((uint32_t)0x00000100) /*!< Channel 8 selection */
+#define ADC_CHSELR_CHSEL7 ((uint32_t)0x00000080) /*!< Channel 7 selection */
+#define ADC_CHSELR_CHSEL6 ((uint32_t)0x00000040) /*!< Channel 6 selection */
+#define ADC_CHSELR_CHSEL5 ((uint32_t)0x00000020) /*!< Channel 5 selection */
+#define ADC_CHSELR_CHSEL4 ((uint32_t)0x00000010) /*!< Channel 4 selection */
+#define ADC_CHSELR_CHSEL3 ((uint32_t)0x00000008) /*!< Channel 3 selection */
+#define ADC_CHSELR_CHSEL2 ((uint32_t)0x00000004) /*!< Channel 2 selection */
+#define ADC_CHSELR_CHSEL1 ((uint32_t)0x00000002) /*!< Channel 1 selection */
+#define ADC_CHSELR_CHSEL0 ((uint32_t)0x00000001) /*!< Channel 0 selection */
+
+/******************** Bit definition for ADC_DR register ********************/
+#define ADC_DR_DATA ((uint32_t)0x0000FFFF) /*!< Regular data */
+
+/******************* Bit definition for ADC_CCR register ********************/
+#define ADC_CCR_VBATEN ((uint32_t)0x01000000) /*!< Voltage battery enable */
+#define ADC_CCR_TSEN ((uint32_t)0x00800000) /*!< Tempurature sensore enable */
+#define ADC_CCR_VREFEN ((uint32_t)0x00400000) /*!< Vrefint enable */
+
+
+/******************************************************************************/
+/* */
+/* HDMI-CEC (CEC) */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for CEC_CR register *********************/
+#define CEC_CR_CECEN ((uint32_t)0x00000001) /*!< CEC Enable */
+#define CEC_CR_TXSOM ((uint32_t)0x00000002) /*!< CEC Tx Start Of Message */
+#define CEC_CR_TXEOM ((uint32_t)0x00000004) /*!< CEC Tx End Of Message */
+
+/******************* Bit definition for CEC_CFGR register *******************/
+#define CEC_CFGR_SFT ((uint32_t)0x00000007) /*!< CEC Signal Free Time */
+#define CEC_CFGR_RXTOL ((uint32_t)0x00000008) /*!< CEC Tolerance */
+#define CEC_CFGR_BRESTP ((uint32_t)0x00000010) /*!< CEC Rx Stop */
+#define CEC_CFGR_BREGEN ((uint32_t)0x00000020) /*!< CEC Bit Rising Error generation */
+#define CEC_CFGR_LBPEGEN ((uint32_t)0x00000040) /*!< CEC Long Bit Period Error gener. */
+#define CEC_CFGR_BRDNOGEN ((uint32_t)0x00000080) /*!< CEC Broadcast No Error generation */
+#define CEC_CFGR_SFTOPT ((uint32_t)0x00000100) /*!< CEC Signal Free Time optional */
+#define CEC_CFGR_OAR ((uint32_t)0x7FFF0000) /*!< CEC Own Address */
+#define CEC_CFGR_LSTN ((uint32_t)0x80000000) /*!< CEC Listen mode */
+
+/******************* Bit definition for CEC_TXDR register *******************/
+#define CEC_TXDR_TXD ((uint32_t)0x000000FF) /*!< CEC Tx Data */
+
+/******************* Bit definition for CEC_RXDR register *******************/
+#define CEC_TXDR_RXD ((uint32_t)0x000000FF) /*!< CEC Rx Data */
+
+/******************* Bit definition for CEC_ISR register ********************/
+#define CEC_ISR_RXBR ((uint32_t)0x00000001) /*!< CEC Rx-Byte Received */
+#define CEC_ISR_RXEND ((uint32_t)0x00000002) /*!< CEC End Of Reception */
+#define CEC_ISR_RXOVR ((uint32_t)0x00000004) /*!< CEC Rx-Overrun */
+#define CEC_ISR_BRE ((uint32_t)0x00000008) /*!< CEC Rx Bit Rising Error */
+#define CEC_ISR_SBPE ((uint32_t)0x00000010) /*!< CEC Rx Short Bit period Error */
+#define CEC_ISR_LBPE ((uint32_t)0x00000020) /*!< CEC Rx Long Bit period Error */
+#define CEC_ISR_RXACKE ((uint32_t)0x00000040) /*!< CEC Rx Missing Acknowledge */
+#define CEC_ISR_ARBLST ((uint32_t)0x00000080) /*!< CEC Arbitration Lost */
+#define CEC_ISR_TXBR ((uint32_t)0x00000100) /*!< CEC Tx Byte Request */
+#define CEC_ISR_TXEND ((uint32_t)0x00000200) /*!< CEC End of Transmission */
+#define CEC_ISR_TXUDR ((uint32_t)0x00000400) /*!< CEC Tx-Buffer Underrun */
+#define CEC_ISR_TXERR ((uint32_t)0x00000800) /*!< CEC Tx-Error */
+#define CEC_ISR_TXACKE ((uint32_t)0x00001000) /*!< CEC Tx Missing Acknowledge */
+
+/******************* Bit definition for CEC_IER register ********************/
+#define CEC_IER_RXBRIE ((uint32_t)0x00000001) /*!< CEC Rx-Byte Received IT Enable */
+#define CEC_IER_RXENDIE ((uint32_t)0x00000002) /*!< CEC End Of Reception IT Enable */
+#define CEC_IER_RXOVRIE ((uint32_t)0x00000004) /*!< CEC Rx-Overrun IT Enable */
+#define CEC_IER_BREIE ((uint32_t)0x00000008) /*!< CEC Rx Bit Rising Error IT Enable */
+#define CEC_IER_SBPEIE ((uint32_t)0x00000010) /*!< CEC Rx Short Bit period Error IT Enable*/
+#define CEC_IER_LBPEIE ((uint32_t)0x00000020) /*!< CEC Rx Long Bit period Error IT Enable */
+#define CEC_IER_RXACKEIE ((uint32_t)0x00000040) /*!< CEC Rx Missing Acknowledge IT Enable */
+#define CEC_IER_ARBLSTIE ((uint32_t)0x00000080) /*!< CEC Arbitration Lost IT Enable */
+#define CEC_IER_TXBRIE ((uint32_t)0x00000100) /*!< CEC Tx Byte Request IT Enable */
+#define CEC_IER_TXENDIE ((uint32_t)0x00000200) /*!< CEC End of Transmission IT Enable */
+#define CEC_IER_TXUDRIE ((uint32_t)0x00000400) /*!< CEC Tx-Buffer Underrun IT Enable */
+#define CEC_IER_TXERRIE ((uint32_t)0x00000800) /*!< CEC Tx-Error IT Enable */
+#define CEC_IER_TXACKEIE ((uint32_t)0x00001000) /*!< CEC Tx Missing Acknowledge IT Enable */
+
+
+/******************************************************************************/
+/* */
+/* Analog Comparators (COMP) */
+/* */
+/******************************************************************************/
+/*********************** Bit definition for COMP_CSR register ***************/
+/* COMP1 bits definition */
+#define COMP_CSR_COMP1EN ((uint32_t)0x00000001) /*!< COMP1 enable */
+#define COMP_CSR_COMP1SW1 ((uint32_t)0x00000002) /*!< SW1 switch control */
+#define COMP_CSR_COMP1MODE ((uint32_t)0x0000000C) /*!< COMP1 power mode */
+#define COMP_CSR_COMP1MODE_0 ((uint32_t)0x00000004) /*!< COMP1 power mode bit 0 */
+#define COMP_CSR_COMP1MODE_1 ((uint32_t)0x00000008) /*!< COMP1 power mode bit 1 */
+#define COMP_CSR_COMP1INSEL ((uint32_t)0x00000070) /*!< COMP1 inverting input select */
+#define COMP_CSR_COMP1INSEL_0 ((uint32_t)0x00000010) /*!< COMP1 inverting input select bit 0 */
+#define COMP_CSR_COMP1INSEL_1 ((uint32_t)0x00000020) /*!< COMP1 inverting input select bit 1 */
+#define COMP_CSR_COMP1INSEL_2 ((uint32_t)0x00000040) /*!< COMP1 inverting input select bit 2 */
+#define COMP_CSR_COMP1OUTSEL ((uint32_t)0x00000700) /*!< COMP1 output select */
+#define COMP_CSR_COMP1OUTSEL_0 ((uint32_t)0x00000100) /*!< COMP1 output select bit 0 */
+#define COMP_CSR_COMP1OUTSEL_1 ((uint32_t)0x00000200) /*!< COMP1 output select bit 1 */
+#define COMP_CSR_COMP1OUTSEL_2 ((uint32_t)0x00000400) /*!< COMP1 output select bit 2 */
+#define COMP_CSR_COMP1POL ((uint32_t)0x00000800) /*!< COMP1 output polarity */
+#define COMP_CSR_COMP1HYST ((uint32_t)0x00003000) /*!< COMP1 hysteresis */
+#define COMP_CSR_COMP1HYST_0 ((uint32_t)0x00001000) /*!< COMP1 hysteresis bit 0 */
+#define COMP_CSR_COMP1HYST_1 ((uint32_t)0x00002000) /*!< COMP1 hysteresis bit 1 */
+#define COMP_CSR_COMP1OUT ((uint32_t)0x00004000) /*!< COMP1 output level */
+#define COMP_CSR_COMP1LOCK ((uint32_t)0x00008000) /*!< COMP1 lock */
+/* COMP2 bits definition */
+#define COMP_CSR_COMP2EN ((uint32_t)0x00010000) /*!< COMP2 enable */
+#define COMP_CSR_COMP2MODE ((uint32_t)0x000C0000) /*!< COMP2 power mode */
+#define COMP_CSR_COMP2MODE_0 ((uint32_t)0x00040000) /*!< COMP2 power mode bit 0 */
+#define COMP_CSR_COMP2MODE_1 ((uint32_t)0x00080000) /*!< COMP2 power mode bit 1 */
+#define COMP_CSR_COMP2INSEL ((uint32_t)0x00700000) /*!< COMP2 inverting input select */
+#define COMP_CSR_COMP2INSEL_0 ((uint32_t)0x00100000) /*!< COMP2 inverting input select bit 0 */
+#define COMP_CSR_COMP2INSEL_1 ((uint32_t)0x00200000) /*!< COMP2 inverting input select bit 1 */
+#define COMP_CSR_COMP2INSEL_2 ((uint32_t)0x00400000) /*!< COMP2 inverting input select bit 2 */
+#define COMP_CSR_WNDWEN ((uint32_t)0x00800000) /*!< Comparators window mode enable */
+#define COMP_CSR_COMP2OUTSEL ((uint32_t)0x07000000) /*!< COMP2 output select */
+#define COMP_CSR_COMP2OUTSEL_0 ((uint32_t)0x01000000) /*!< COMP2 output select bit 0 */
+#define COMP_CSR_COMP2OUTSEL_1 ((uint32_t)0x02000000) /*!< COMP2 output select bit 1 */
+#define COMP_CSR_COMP2OUTSEL_2 ((uint32_t)0x04000000) /*!< COMP2 output select bit 2 */
+#define COMP_CSR_COMP2POL ((uint32_t)0x08000000) /*!< COMP2 output polarity */
+#define COMP_CSR_COMP2HYST ((uint32_t)0x30000000) /*!< COMP2 hysteresis */
+#define COMP_CSR_COMP2HYST_0 ((uint32_t)0x10000000) /*!< COMP2 hysteresis bit 0 */
+#define COMP_CSR_COMP2HYST_1 ((uint32_t)0x20000000) /*!< COMP2 hysteresis bit 1 */
+#define COMP_CSR_COMP2OUT ((uint32_t)0x40000000) /*!< COMP2 output level */
+#define COMP_CSR_COMP2LOCK ((uint32_t)0x80000000) /*!< COMP2 lock */
+/* COMPx bits definition */
+#define COMP_CSR_COMPxEN ((uint16_t)0x0001) /*!< COMPx enable */
+#define COMP_CSR_COMPxMODE ((uint16_t)0x000C) /*!< COMPx power mode */
+#define COMP_CSR_COMPxMODE_0 ((uint16_t)0x0004) /*!< COMPx power mode bit 0 */
+#define COMP_CSR_COMPxMODE_1 ((uint16_t)0x0008) /*!< COMPx power mode bit 1 */
+#define COMP_CSR_COMPxINSEL ((uint16_t)0x0070) /*!< COMPx inverting input select */
+#define COMP_CSR_COMPxINSEL_0 ((uint16_t)0x0010) /*!< COMPx inverting input select bit 0 */
+#define COMP_CSR_COMPxINSEL_1 ((uint16_t)0x0020) /*!< COMPx inverting input select bit 1 */
+#define COMP_CSR_COMPxINSEL_2 ((uint16_t)0x0040) /*!< COMPx inverting input select bit 2 */
+#define COMP_CSR_COMPxOUTSEL ((uint16_t)0x0700) /*!< COMPx output select */
+#define COMP_CSR_COMPxOUTSEL_0 ((uint16_t)0x0100) /*!< COMPx output select bit 0 */
+#define COMP_CSR_COMPxOUTSEL_1 ((uint16_t)0x0200) /*!< COMPx output select bit 1 */
+#define COMP_CSR_COMPxOUTSEL_2 ((uint16_t)0x0400) /*!< COMPx output select bit 2 */
+#define COMP_CSR_COMPxPOL ((uint16_t)0x0800) /*!< COMPx output polarity */
+#define COMP_CSR_COMPxHYST ((uint16_t)0x3000) /*!< COMPx hysteresis */
+#define COMP_CSR_COMPxHYST_0 ((uint16_t)0x1000) /*!< COMPx hysteresis bit 0 */
+#define COMP_CSR_COMPxHYST_1 ((uint16_t)0x2000) /*!< COMPx hysteresis bit 1 */
+#define COMP_CSR_COMPxOUT ((uint16_t)0x4000) /*!< COMPx output level */
+#define COMP_CSR_COMPxLOCK ((uint16_t)0x8000) /*!< COMPx lock */
+
+/******************************************************************************/
+/* */
+/* CRC calculation unit (CRC) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for CRC_DR register *********************/
+#define CRC_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data register bits */
+
+/******************* Bit definition for CRC_IDR register ********************/
+#define CRC_IDR_IDR ((uint8_t)0xFF) /*!< General-purpose 8-bit data register bits */
+
+/******************** Bit definition for CRC_CR register ********************/
+#define CRC_CR_RESET ((uint32_t)0x00000001) /*!< RESET the CRC computation unit bit */
+#define CRC_CR_REV_IN ((uint32_t)0x00000060) /*!< REV_IN Reverse Input Data bits */
+#define CRC_CR_REV_IN_0 ((uint32_t)0x00000020) /*!< REV_IN Bit 0 */
+#define CRC_CR_REV_IN_1 ((uint32_t)0x00000040) /*!< REV_IN Bit 1 */
+#define CRC_CR_REV_OUT ((uint32_t)0x00000080) /*!< REV_OUT Reverse Output Data bits */
+
+/******************* Bit definition for CRC_INIT register *******************/
+#define CRC_INIT_INIT ((uint32_t)0xFFFFFFFF) /*!< Initial CRC value bits */
+
+
+/******************************************************************************/
+/* */
+/* Digital to Analog Converter (DAC) */
+/* */
+/******************************************************************************/
+/******************** Bit definition for DAC_CR register ********************/
+#define DAC_CR_EN1 ((uint32_t)0x00000001) /*!< DAC channel1 enable */
+#define DAC_CR_BOFF1 ((uint32_t)0x00000002) /*!< DAC channel1 output buffer disable */
+#define DAC_CR_TEN1 ((uint32_t)0x00000004) /*!< DAC channel1 Trigger enable */
+
+#define DAC_CR_TSEL1 ((uint32_t)0x00000038) /*!< TSEL1[2:0] (DAC channel1 Trigger selection) */
+#define DAC_CR_TSEL1_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define DAC_CR_TSEL1_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define DAC_CR_TSEL1_2 ((uint32_t)0x00000020) /*!< Bit 2 */
+
+#define DAC_CR_DMAEN1 ((uint32_t)0x00001000) /*!< DAC channel1 DMA enable */
+#define DAC_CR_DMAUDRIE1 ((uint32_t)0x00002000) /*!< DAC channel1 DMA Underrun Interrupt enable */
+
+
+/***************** Bit definition for DAC_SWTRIGR register ******************/
+#define DAC_SWTRIGR_SWTRIG1 ((uint32_t)0x00000001) /*!< DAC channel1 software trigger */
+
+/***************** Bit definition for DAC_DHR12R1 register ******************/
+#define DAC_DHR12R1_DACC1DHR ((uint32_t)0x00000FFF) /*!< DAC channel1 12-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12L1 register ******************/
+#define DAC_DHR12L1_DACC1DHR ((uint32_t)0x0000FFF0) /*!< DAC channel1 12-bit Left aligned data */
+
+/****************** Bit definition for DAC_DHR8R1 register ******************/
+#define DAC_DHR8R1_DACC1DHR ((uint32_t)0x000000FF) /*!< DAC channel1 8-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12RD register ******************/
+#define DAC_DHR12RD_DACC1DHR ((uint32_t)0x00000FFF) /*!< DAC channel1 12-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12LD register ******************/
+#define DAC_DHR12LD_DACC1DHR ((uint32_t)0x0000FFF0) /*!< DAC channel1 12-bit Left aligned data */
+
+/****************** Bit definition for DAC_DHR8RD register ******************/
+#define DAC_DHR8RD_DACC1DHR ((uint32_t)0x000000FF) /*!< DAC channel1 8-bit Right aligned data */
+
+/******************* Bit definition for DAC_DOR1 register *******************/
+#define DAC_DOR1_DACC1DOR ((uint32_t)0x00000FFF) /*!< DAC channel1 data output */
+
+/******************** Bit definition for DAC_SR register ********************/
+#define DAC_SR_DMAUDR1 ((uint32_t)0x00002000) /*!< DAC channel1 DMA underrun flag */
+
+
+/******************************************************************************/
+/* */
+/* Debug MCU (DBGMCU) */
+/* */
+/******************************************************************************/
+
+/**************** Bit definition for DBGMCU_IDCODE register *****************/
+#define DBGMCU_IDCODE_DEV_ID ((uint32_t)0x00000FFF) /*!< Device Identifier */
+
+#define DBGMCU_IDCODE_REV_ID ((uint32_t)0xFFFF0000) /*!< REV_ID[15:0] bits (Revision Identifier) */
+#define DBGMCU_IDCODE_REV_ID_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define DBGMCU_IDCODE_REV_ID_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define DBGMCU_IDCODE_REV_ID_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define DBGMCU_IDCODE_REV_ID_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+#define DBGMCU_IDCODE_REV_ID_4 ((uint32_t)0x00100000) /*!< Bit 4 */
+#define DBGMCU_IDCODE_REV_ID_5 ((uint32_t)0x00200000) /*!< Bit 5 */
+#define DBGMCU_IDCODE_REV_ID_6 ((uint32_t)0x00400000) /*!< Bit 6 */
+#define DBGMCU_IDCODE_REV_ID_7 ((uint32_t)0x00800000) /*!< Bit 7 */
+#define DBGMCU_IDCODE_REV_ID_8 ((uint32_t)0x01000000) /*!< Bit 8 */
+#define DBGMCU_IDCODE_REV_ID_9 ((uint32_t)0x02000000) /*!< Bit 9 */
+#define DBGMCU_IDCODE_REV_ID_10 ((uint32_t)0x04000000) /*!< Bit 10 */
+#define DBGMCU_IDCODE_REV_ID_11 ((uint32_t)0x08000000) /*!< Bit 11 */
+#define DBGMCU_IDCODE_REV_ID_12 ((uint32_t)0x10000000) /*!< Bit 12 */
+#define DBGMCU_IDCODE_REV_ID_13 ((uint32_t)0x20000000) /*!< Bit 13 */
+#define DBGMCU_IDCODE_REV_ID_14 ((uint32_t)0x40000000) /*!< Bit 14 */
+#define DBGMCU_IDCODE_REV_ID_15 ((uint32_t)0x80000000) /*!< Bit 15 */
+
+/****************** Bit definition for DBGMCU_CR register *******************/
+#define DBGMCU_CR_DBG_STOP ((uint32_t)0x00000002) /*!< Debug Stop Mode */
+#define DBGMCU_CR_DBG_STANDBY ((uint32_t)0x00000004) /*!< Debug Standby mode */
+
+/****************** Bit definition for DBGMCU_APB1_FZ register **************/
+#define DBGMCU_APB1_FZ_DBG_TIM2_STOP ((uint32_t)0x00000001) /*!< TIM2 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM3_STOP ((uint32_t)0x00000002) /*!< TIM3 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM6_STOP ((uint32_t)0x00000010) /*!< TIM6 counter stopped when core is halted (not available on STM32F042 devices)*/
+#define DBGMCU_APB1_FZ_DBG_TIM14_STOP ((uint32_t)0x00000100) /*!< TIM14 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_RTC_STOP ((uint32_t)0x00000400) /*!< RTC Calendar frozen when core is halted */
+#define DBGMCU_APB1_FZ_DBG_WWDG_STOP ((uint32_t)0x00000800) /*!< Debug Window Watchdog stopped when Core is halted */
+#define DBGMCU_APB1_FZ_DBG_IWDG_STOP ((uint32_t)0x00001000) /*!< Debug Independent Watchdog stopped when Core is halted */
+#define DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00200000) /*!< I2C1 SMBUS timeout mode stopped when Core is halted */
+
+/****************** Bit definition for DBGMCU_APB2_FZ register **************/
+#define DBGMCU_APB2_FZ_DBG_TIM1_STOP ((uint32_t)0x00000800) /*!< TIM1 counter stopped when core is halted */
+#define DBGMCU_APB2_FZ_DBG_TIM15_STOP ((uint32_t)0x00010000) /*!< TIM15 counter stopped when core is halted (not available on STM32F042 devices) */
+#define DBGMCU_APB2_FZ_DBG_TIM16_STOP ((uint32_t)0x00020000) /*!< TIM16 counter stopped when core is halted */
+#define DBGMCU_APB2_FZ_DBG_TIM17_STOP ((uint32_t)0x00040000) /*!< TIM17 counter stopped when core is halted */
+
+/******************************************************************************/
+/* */
+/* DMA Controller (DMA) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for DMA_ISR register ********************/
+#define DMA_ISR_GIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt flag */
+#define DMA_ISR_TCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete flag */
+#define DMA_ISR_HTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer flag */
+#define DMA_ISR_TEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error flag */
+#define DMA_ISR_GIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt flag */
+#define DMA_ISR_TCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete flag */
+#define DMA_ISR_HTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer flag */
+#define DMA_ISR_TEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error flag */
+#define DMA_ISR_GIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt flag */
+#define DMA_ISR_TCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete flag */
+#define DMA_ISR_HTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer flag */
+#define DMA_ISR_TEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error flag */
+#define DMA_ISR_GIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt flag */
+#define DMA_ISR_TCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete flag */
+#define DMA_ISR_HTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer flag */
+#define DMA_ISR_TEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error flag */
+#define DMA_ISR_GIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt flag */
+#define DMA_ISR_TCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete flag */
+#define DMA_ISR_HTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer flag */
+#define DMA_ISR_TEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error flag */
+
+/******************* Bit definition for DMA_IFCR register *******************/
+#define DMA_IFCR_CGIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt clear */
+#define DMA_IFCR_CTCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete clear */
+#define DMA_IFCR_CHTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer clear */
+#define DMA_IFCR_CTEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error clear */
+#define DMA_IFCR_CGIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt clear */
+#define DMA_IFCR_CTCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete clear */
+#define DMA_IFCR_CHTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer clear */
+#define DMA_IFCR_CTEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error clear */
+#define DMA_IFCR_CGIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt clear */
+#define DMA_IFCR_CTCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete clear */
+#define DMA_IFCR_CHTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer clear */
+#define DMA_IFCR_CTEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error clear */
+#define DMA_IFCR_CGIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt clear */
+#define DMA_IFCR_CTCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete clear */
+#define DMA_IFCR_CHTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer clear */
+#define DMA_IFCR_CTEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error clear */
+#define DMA_IFCR_CGIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt clear */
+#define DMA_IFCR_CTCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete clear */
+#define DMA_IFCR_CHTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer clear */
+#define DMA_IFCR_CTEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error clear */
+
+/******************* Bit definition for DMA_CCR register ********************/
+#define DMA_CCR_EN ((uint32_t)0x00000001) /*!< Channel enable */
+#define DMA_CCR_TCIE ((uint32_t)0x00000002) /*!< Transfer complete interrupt enable */
+#define DMA_CCR_HTIE ((uint32_t)0x00000004) /*!< Half Transfer interrupt enable */
+#define DMA_CCR_TEIE ((uint32_t)0x00000008) /*!< Transfer error interrupt enable */
+#define DMA_CCR_DIR ((uint32_t)0x00000010) /*!< Data transfer direction */
+#define DMA_CCR_CIRC ((uint32_t)0x00000020) /*!< Circular mode */
+#define DMA_CCR_PINC ((uint32_t)0x00000040) /*!< Peripheral increment mode */
+#define DMA_CCR_MINC ((uint32_t)0x00000080) /*!< Memory increment mode */
+
+#define DMA_CCR_PSIZE ((uint32_t)0x00000300) /*!< PSIZE[1:0] bits (Peripheral size) */
+#define DMA_CCR_PSIZE_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define DMA_CCR_PSIZE_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+
+#define DMA_CCR_MSIZE ((uint32_t)0x00000C00) /*!< MSIZE[1:0] bits (Memory size) */
+#define DMA_CCR_MSIZE_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define DMA_CCR_MSIZE_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+
+#define DMA_CCR_PL ((uint32_t)0x00003000) /*!< PL[1:0] bits(Channel Priority level)*/
+#define DMA_CCR_PL_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define DMA_CCR_PL_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+
+#define DMA_CCR_MEM2MEM ((uint32_t)0x00004000) /*!< Memory to memory mode */
+
+/****************** Bit definition for DMA_CNDTR register *******************/
+#define DMA_CNDTR_NDT ((uint32_t)0x0000FFFF) /*!< Number of data to Transfer */
+
+/****************** Bit definition for DMA_CPAR register ********************/
+#define DMA_CPAR_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */
+
+/****************** Bit definition for DMA_CMAR register ********************/
+#define DMA_CMAR_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */
+
+/******************************************************************************/
+/* */
+/* External Interrupt/Event Controller (EXTI) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for EXTI_IMR register *******************/
+#define EXTI_IMR_MR0 ((uint32_t)0x00000001) /*!< Interrupt Mask on line 0 */
+#define EXTI_IMR_MR1 ((uint32_t)0x00000002) /*!< Interrupt Mask on line 1 */
+#define EXTI_IMR_MR2 ((uint32_t)0x00000004) /*!< Interrupt Mask on line 2 */
+#define EXTI_IMR_MR3 ((uint32_t)0x00000008) /*!< Interrupt Mask on line 3 */
+#define EXTI_IMR_MR4 ((uint32_t)0x00000010) /*!< Interrupt Mask on line 4 */
+#define EXTI_IMR_MR5 ((uint32_t)0x00000020) /*!< Interrupt Mask on line 5 */
+#define EXTI_IMR_MR6 ((uint32_t)0x00000040) /*!< Interrupt Mask on line 6 */
+#define EXTI_IMR_MR7 ((uint32_t)0x00000080) /*!< Interrupt Mask on line 7 */
+#define EXTI_IMR_MR8 ((uint32_t)0x00000100) /*!< Interrupt Mask on line 8 */
+#define EXTI_IMR_MR9 ((uint32_t)0x00000200) /*!< Interrupt Mask on line 9 */
+#define EXTI_IMR_MR10 ((uint32_t)0x00000400) /*!< Interrupt Mask on line 10 */
+#define EXTI_IMR_MR11 ((uint32_t)0x00000800) /*!< Interrupt Mask on line 11 */
+#define EXTI_IMR_MR12 ((uint32_t)0x00001000) /*!< Interrupt Mask on line 12 */
+#define EXTI_IMR_MR13 ((uint32_t)0x00002000) /*!< Interrupt Mask on line 13 */
+#define EXTI_IMR_MR14 ((uint32_t)0x00004000) /*!< Interrupt Mask on line 14 */
+#define EXTI_IMR_MR15 ((uint32_t)0x00008000) /*!< Interrupt Mask on line 15 */
+#define EXTI_IMR_MR16 ((uint32_t)0x00010000) /*!< Interrupt Mask on line 16 */
+#define EXTI_IMR_MR17 ((uint32_t)0x00020000) /*!< Interrupt Mask on line 17 */
+#define EXTI_IMR_MR19 ((uint32_t)0x00080000) /*!< Interrupt Mask on line 19 */
+#define EXTI_IMR_MR21 ((uint32_t)0x00200000) /*!< Interrupt Mask on line 21 */
+#define EXTI_IMR_MR22 ((uint32_t)0x00400000) /*!< Interrupt Mask on line 22 */
+#define EXTI_IMR_MR23 ((uint32_t)0x00800000) /*!< Interrupt Mask on line 23 */
+#define EXTI_IMR_MR25 ((uint32_t)0x02000000) /*!< Interrupt Mask on line 25 */
+#define EXTI_IMR_MR27 ((uint32_t)0x08000000) /*!< Interrupt Mask on line 27 */
+
+/****************** Bit definition for EXTI_EMR register ********************/
+#define EXTI_EMR_MR0 ((uint32_t)0x00000001) /*!< Event Mask on line 0 */
+#define EXTI_EMR_MR1 ((uint32_t)0x00000002) /*!< Event Mask on line 1 */
+#define EXTI_EMR_MR2 ((uint32_t)0x00000004) /*!< Event Mask on line 2 */
+#define EXTI_EMR_MR3 ((uint32_t)0x00000008) /*!< Event Mask on line 3 */
+#define EXTI_EMR_MR4 ((uint32_t)0x00000010) /*!< Event Mask on line 4 */
+#define EXTI_EMR_MR5 ((uint32_t)0x00000020) /*!< Event Mask on line 5 */
+#define EXTI_EMR_MR6 ((uint32_t)0x00000040) /*!< Event Mask on line 6 */
+#define EXTI_EMR_MR7 ((uint32_t)0x00000080) /*!< Event Mask on line 7 */
+#define EXTI_EMR_MR8 ((uint32_t)0x00000100) /*!< Event Mask on line 8 */
+#define EXTI_EMR_MR9 ((uint32_t)0x00000200) /*!< Event Mask on line 9 */
+#define EXTI_EMR_MR10 ((uint32_t)0x00000400) /*!< Event Mask on line 10 */
+#define EXTI_EMR_MR11 ((uint32_t)0x00000800) /*!< Event Mask on line 11 */
+#define EXTI_EMR_MR12 ((uint32_t)0x00001000) /*!< Event Mask on line 12 */
+#define EXTI_EMR_MR13 ((uint32_t)0x00002000) /*!< Event Mask on line 13 */
+#define EXTI_EMR_MR14 ((uint32_t)0x00004000) /*!< Event Mask on line 14 */
+#define EXTI_EMR_MR15 ((uint32_t)0x00008000) /*!< Event Mask on line 15 */
+#define EXTI_EMR_MR16 ((uint32_t)0x00010000) /*!< Event Mask on line 16 */
+#define EXTI_EMR_MR17 ((uint32_t)0x00020000) /*!< Event Mask on line 17 */
+#define EXTI_EMR_MR19 ((uint32_t)0x00080000) /*!< Event Mask on line 19 */
+#define EXTI_EMR_MR21 ((uint32_t)0x00200000) /*!< Event Mask on line 21 */
+#define EXTI_EMR_MR22 ((uint32_t)0x00400000) /*!< Event Mask on line 22 */
+#define EXTI_EMR_MR23 ((uint32_t)0x00800000) /*!< Event Mask on line 23 */
+#define EXTI_EMR_MR25 ((uint32_t)0x02000000) /*!< Event Mask on line 25 */
+#define EXTI_EMR_MR27 ((uint32_t)0x08000000) /*!< Event Mask on line 27 */
+
+/******************* Bit definition for EXTI_RTSR register ******************/
+#define EXTI_RTSR_TR0 ((uint32_t)0x00000001) /*!< Rising trigger event configuration bit of line 0 */
+#define EXTI_RTSR_TR1 ((uint32_t)0x00000002) /*!< Rising trigger event configuration bit of line 1 */
+#define EXTI_RTSR_TR2 ((uint32_t)0x00000004) /*!< Rising trigger event configuration bit of line 2 */
+#define EXTI_RTSR_TR3 ((uint32_t)0x00000008) /*!< Rising trigger event configuration bit of line 3 */
+#define EXTI_RTSR_TR4 ((uint32_t)0x00000010) /*!< Rising trigger event configuration bit of line 4 */
+#define EXTI_RTSR_TR5 ((uint32_t)0x00000020) /*!< Rising trigger event configuration bit of line 5 */
+#define EXTI_RTSR_TR6 ((uint32_t)0x00000040) /*!< Rising trigger event configuration bit of line 6 */
+#define EXTI_RTSR_TR7 ((uint32_t)0x00000080) /*!< Rising trigger event configuration bit of line 7 */
+#define EXTI_RTSR_TR8 ((uint32_t)0x00000100) /*!< Rising trigger event configuration bit of line 8 */
+#define EXTI_RTSR_TR9 ((uint32_t)0x00000200) /*!< Rising trigger event configuration bit of line 9 */
+#define EXTI_RTSR_TR10 ((uint32_t)0x00000400) /*!< Rising trigger event configuration bit of line 10 */
+#define EXTI_RTSR_TR11 ((uint32_t)0x00000800) /*!< Rising trigger event configuration bit of line 11 */
+#define EXTI_RTSR_TR12 ((uint32_t)0x00001000) /*!< Rising trigger event configuration bit of line 12 */
+#define EXTI_RTSR_TR13 ((uint32_t)0x00002000) /*!< Rising trigger event configuration bit of line 13 */
+#define EXTI_RTSR_TR14 ((uint32_t)0x00004000) /*!< Rising trigger event configuration bit of line 14 */
+#define EXTI_RTSR_TR15 ((uint32_t)0x00008000) /*!< Rising trigger event configuration bit of line 15 */
+#define EXTI_RTSR_TR16 ((uint32_t)0x00010000) /*!< Rising trigger event configuration bit of line 16 */
+#define EXTI_RTSR_TR17 ((uint32_t)0x00020000) /*!< Rising trigger event configuration bit of line 17 */
+#define EXTI_RTSR_TR19 ((uint32_t)0x00080000) /*!< Rising trigger event configuration bit of line 19 */
+
+/******************* Bit definition for EXTI_FTSR register *******************/
+#define EXTI_FTSR_TR0 ((uint32_t)0x00000001) /*!< Falling trigger event configuration bit of line 0 */
+#define EXTI_FTSR_TR1 ((uint32_t)0x00000002) /*!< Falling trigger event configuration bit of line 1 */
+#define EXTI_FTSR_TR2 ((uint32_t)0x00000004) /*!< Falling trigger event configuration bit of line 2 */
+#define EXTI_FTSR_TR3 ((uint32_t)0x00000008) /*!< Falling trigger event configuration bit of line 3 */
+#define EXTI_FTSR_TR4 ((uint32_t)0x00000010) /*!< Falling trigger event configuration bit of line 4 */
+#define EXTI_FTSR_TR5 ((uint32_t)0x00000020) /*!< Falling trigger event configuration bit of line 5 */
+#define EXTI_FTSR_TR6 ((uint32_t)0x00000040) /*!< Falling trigger event configuration bit of line 6 */
+#define EXTI_FTSR_TR7 ((uint32_t)0x00000080) /*!< Falling trigger event configuration bit of line 7 */
+#define EXTI_FTSR_TR8 ((uint32_t)0x00000100) /*!< Falling trigger event configuration bit of line 8 */
+#define EXTI_FTSR_TR9 ((uint32_t)0x00000200) /*!< Falling trigger event configuration bit of line 9 */
+#define EXTI_FTSR_TR10 ((uint32_t)0x00000400) /*!< Falling trigger event configuration bit of line 10 */
+#define EXTI_FTSR_TR11 ((uint32_t)0x00000800) /*!< Falling trigger event configuration bit of line 11 */
+#define EXTI_FTSR_TR12 ((uint32_t)0x00001000) /*!< Falling trigger event configuration bit of line 12 */
+#define EXTI_FTSR_TR13 ((uint32_t)0x00002000) /*!< Falling trigger event configuration bit of line 13 */
+#define EXTI_FTSR_TR14 ((uint32_t)0x00004000) /*!< Falling trigger event configuration bit of line 14 */
+#define EXTI_FTSR_TR15 ((uint32_t)0x00008000) /*!< Falling trigger event configuration bit of line 15 */
+#define EXTI_FTSR_TR16 ((uint32_t)0x00010000) /*!< Falling trigger event configuration bit of line 16 */
+#define EXTI_FTSR_TR17 ((uint32_t)0x00020000) /*!< Falling trigger event configuration bit of line 17 */
+#define EXTI_FTSR_TR19 ((uint32_t)0x00080000) /*!< Falling trigger event configuration bit of line 19 */
+
+/******************* Bit definition for EXTI_SWIER register *******************/
+#define EXTI_SWIER_SWIER0 ((uint32_t)0x00000001) /*!< Software Interrupt on line 0 */
+#define EXTI_SWIER_SWIER1 ((uint32_t)0x00000002) /*!< Software Interrupt on line 1 */
+#define EXTI_SWIER_SWIER2 ((uint32_t)0x00000004) /*!< Software Interrupt on line 2 */
+#define EXTI_SWIER_SWIER3 ((uint32_t)0x00000008) /*!< Software Interrupt on line 3 */
+#define EXTI_SWIER_SWIER4 ((uint32_t)0x00000010) /*!< Software Interrupt on line 4 */
+#define EXTI_SWIER_SWIER5 ((uint32_t)0x00000020) /*!< Software Interrupt on line 5 */
+#define EXTI_SWIER_SWIER6 ((uint32_t)0x00000040) /*!< Software Interrupt on line 6 */
+#define EXTI_SWIER_SWIER7 ((uint32_t)0x00000080) /*!< Software Interrupt on line 7 */
+#define EXTI_SWIER_SWIER8 ((uint32_t)0x00000100) /*!< Software Interrupt on line 8 */
+#define EXTI_SWIER_SWIER9 ((uint32_t)0x00000200) /*!< Software Interrupt on line 9 */
+#define EXTI_SWIER_SWIER10 ((uint32_t)0x00000400) /*!< Software Interrupt on line 10 */
+#define EXTI_SWIER_SWIER11 ((uint32_t)0x00000800) /*!< Software Interrupt on line 11 */
+#define EXTI_SWIER_SWIER12 ((uint32_t)0x00001000) /*!< Software Interrupt on line 12 */
+#define EXTI_SWIER_SWIER13 ((uint32_t)0x00002000) /*!< Software Interrupt on line 13 */
+#define EXTI_SWIER_SWIER14 ((uint32_t)0x00004000) /*!< Software Interrupt on line 14 */
+#define EXTI_SWIER_SWIER15 ((uint32_t)0x00008000) /*!< Software Interrupt on line 15 */
+#define EXTI_SWIER_SWIER16 ((uint32_t)0x00010000) /*!< Software Interrupt on line 16 */
+#define EXTI_SWIER_SWIER17 ((uint32_t)0x00020000) /*!< Software Interrupt on line 17 */
+#define EXTI_SWIER_SWIER19 ((uint32_t)0x00080000) /*!< Software Interrupt on line 19 */
+
+/****************** Bit definition for EXTI_PR register *********************/
+#define EXTI_PR_PR0 ((uint32_t)0x00000001) /*!< Pending bit 0 */
+#define EXTI_PR_PR1 ((uint32_t)0x00000002) /*!< Pending bit 1 */
+#define EXTI_PR_PR2 ((uint32_t)0x00000004) /*!< Pending bit 2 */
+#define EXTI_PR_PR3 ((uint32_t)0x00000008) /*!< Pending bit 3 */
+#define EXTI_PR_PR4 ((uint32_t)0x00000010) /*!< Pending bit 4 */
+#define EXTI_PR_PR5 ((uint32_t)0x00000020) /*!< Pending bit 5 */
+#define EXTI_PR_PR6 ((uint32_t)0x00000040) /*!< Pending bit 6 */
+#define EXTI_PR_PR7 ((uint32_t)0x00000080) /*!< Pending bit 7 */
+#define EXTI_PR_PR8 ((uint32_t)0x00000100) /*!< Pending bit 8 */
+#define EXTI_PR_PR9 ((uint32_t)0x00000200) /*!< Pending bit 9 */
+#define EXTI_PR_PR10 ((uint32_t)0x00000400) /*!< Pending bit 10 */
+#define EXTI_PR_PR11 ((uint32_t)0x00000800) /*!< Pending bit 11 */
+#define EXTI_PR_PR12 ((uint32_t)0x00001000) /*!< Pending bit 12 */
+#define EXTI_PR_PR13 ((uint32_t)0x00002000) /*!< Pending bit 13 */
+#define EXTI_PR_PR14 ((uint32_t)0x00004000) /*!< Pending bit 14 */
+#define EXTI_PR_PR15 ((uint32_t)0x00008000) /*!< Pending bit 15 */
+#define EXTI_PR_PR16 ((uint32_t)0x00010000) /*!< Pending bit 16 */
+#define EXTI_PR_PR17 ((uint32_t)0x00020000) /*!< Pending bit 17 */
+#define EXTI_PR_PR19 ((uint32_t)0x00080000) /*!< Pending bit 19 */
+
+/******************************************************************************/
+/* */
+/* FLASH and Option Bytes Registers */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for FLASH_ACR register ******************/
+#define FLASH_ACR_LATENCY ((uint32_t)0x00000001) /*!< LATENCY bit (Latency) */
+
+#define FLASH_ACR_PRFTBE ((uint32_t)0x00000010) /*!< Prefetch Buffer Enable */
+#define FLASH_ACR_PRFTBS ((uint32_t)0x00000020) /*!< Prefetch Buffer Status */
+
+/****************** Bit definition for FLASH_KEYR register ******************/
+#define FLASH_KEYR_FKEYR ((uint32_t)0xFFFFFFFF) /*!< FPEC Key */
+
+/***************** Bit definition for FLASH_OPTKEYR register ****************/
+#define FLASH_OPTKEYR_OPTKEYR ((uint32_t)0xFFFFFFFF) /*!< Option Byte Key */
+
+/****************** FLASH Keys **********************************************/
+#define FLASH_FKEY1 ((uint32_t)0x45670123) /*!< Flash program erase key1 */
+#define FLASH_FKEY2 ((uint32_t)0xCDEF89AB) /*!< Flash program erase key2: used with FLASH_PEKEY1
+ to unlock the write access to the FPEC. */
+
+#define FLASH_OPTKEY1 ((uint32_t)0x45670123) /*!< Flash option key1 */
+#define FLASH_OPTKEY2 ((uint32_t)0xCDEF89AB) /*!< Flash option key2: used with FLASH_OPTKEY1 to
+ unlock the write access to the option byte block */
+
+/****************** Bit definition for FLASH_SR register *******************/
+#define FLASH_SR_BSY ((uint32_t)0x00000001) /*!< Busy */
+#define FLASH_SR_PGERR ((uint32_t)0x00000004) /*!< Programming Error */
+#define FLASH_SR_WRPRTERR ((uint32_t)0x00000010) /*!< Write Protection Error */
+#define FLASH_SR_EOP ((uint32_t)0x00000020) /*!< End of operation */
+#define FLASH_SR_WRPERR FLASH_SR_WRPRTERR /*!< Legacy of Write Protection Error */
+
+/******************* Bit definition for FLASH_CR register *******************/
+#define FLASH_CR_PG ((uint32_t)0x00000001) /*!< Programming */
+#define FLASH_CR_PER ((uint32_t)0x00000002) /*!< Page Erase */
+#define FLASH_CR_MER ((uint32_t)0x00000004) /*!< Mass Erase */
+#define FLASH_CR_OPTPG ((uint32_t)0x00000010) /*!< Option Byte Programming */
+#define FLASH_CR_OPTER ((uint32_t)0x00000020) /*!< Option Byte Erase */
+#define FLASH_CR_STRT ((uint32_t)0x00000040) /*!< Start */
+#define FLASH_CR_LOCK ((uint32_t)0x00000080) /*!< Lock */
+#define FLASH_CR_OPTWRE ((uint32_t)0x00000200) /*!< Option Bytes Write Enable */
+#define FLASH_CR_ERRIE ((uint32_t)0x00000400) /*!< Error Interrupt Enable */
+#define FLASH_CR_EOPIE ((uint32_t)0x00001000) /*!< End of operation interrupt enable */
+#define FLASH_CR_OBL_LAUNCH ((uint32_t)0x00002000) /*!< Option Bytes Loader Launch */
+
+/******************* Bit definition for FLASH_AR register *******************/
+#define FLASH_AR_FAR ((uint32_t)0xFFFFFFFF) /*!< Flash Address */
+
+/****************** Bit definition for FLASH_OBR register *******************/
+#define FLASH_OBR_OPTERR ((uint32_t)0x00000001) /*!< Option Byte Error */
+#define FLASH_OBR_RDPRT1 ((uint32_t)0x00000002) /*!< Read protection Level 1 */
+#define FLASH_OBR_RDPRT2 ((uint32_t)0x00000004) /*!< Read protection Level 2 */
+
+#define FLASH_OBR_USER ((uint32_t)0x00003700) /*!< User Option Bytes */
+#define FLASH_OBR_IWDG_SW ((uint32_t)0x00000100) /*!< IWDG SW */
+#define FLASH_OBR_nRST_STOP ((uint32_t)0x00000200) /*!< nRST_STOP */
+#define FLASH_OBR_nRST_STDBY ((uint32_t)0x00000400) /*!< nRST_STDBY */
+#define FLASH_OBR_nBOOT1 ((uint32_t)0x00001000) /*!< nBOOT1 */
+#define FLASH_OBR_VDDA_MONITOR ((uint32_t)0x00002000) /*!< VDDA power supply supervisor */
+
+/* Old BOOT1 bit definition, maintained for legacy purpose */
+#define FLASH_OBR_BOOT1 FLASH_OBR_nBOOT1
+
+/* Old OBR_VDDA bit definition, maintained for legacy purpose */
+#define FLASH_OBR_VDDA_ANALOG FLASH_OBR_VDDA_MONITOR
+
+/****************** Bit definition for FLASH_WRPR register ******************/
+#define FLASH_WRPR_WRP ((uint32_t)0x0000FFFF) /*!< Write Protect */
+
+/*----------------------------------------------------------------------------*/
+
+/****************** Bit definition for OB_RDP register **********************/
+#define OB_RDP_RDP ((uint32_t)0x000000FF) /*!< Read protection option byte */
+#define OB_RDP_nRDP ((uint32_t)0x0000FF00) /*!< Read protection complemented option byte */
+
+/****************** Bit definition for OB_USER register *********************/
+#define OB_USER_USER ((uint32_t)0x00FF0000) /*!< User option byte */
+#define OB_USER_nUSER ((uint32_t)0xFF000000) /*!< User complemented option byte */
+
+/****************** Bit definition for OB_WRP0 register *********************/
+#define OB_WRP0_WRP0 ((uint32_t)0x000000FF) /*!< Flash memory write protection option bytes */
+#define OB_WRP0_nWRP0 ((uint32_t)0x0000FF00) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for OB_WRP1 register *********************/
+#define OB_WRP1_WRP1 ((uint32_t)0x00FF0000) /*!< Flash memory write protection option bytes */
+#define OB_WRP1_nWRP1 ((uint32_t)0xFF000000) /*!< Flash memory write protection complemented option bytes */
+
+/******************************************************************************/
+/* */
+/* General Purpose IOs (GPIO) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for GPIO_MODER register *****************/
+#define GPIO_MODER_MODER0 ((uint32_t)0x00000003)
+#define GPIO_MODER_MODER0_0 ((uint32_t)0x00000001)
+#define GPIO_MODER_MODER0_1 ((uint32_t)0x00000002)
+#define GPIO_MODER_MODER1 ((uint32_t)0x0000000C)
+#define GPIO_MODER_MODER1_0 ((uint32_t)0x00000004)
+#define GPIO_MODER_MODER1_1 ((uint32_t)0x00000008)
+#define GPIO_MODER_MODER2 ((uint32_t)0x00000030)
+#define GPIO_MODER_MODER2_0 ((uint32_t)0x00000010)
+#define GPIO_MODER_MODER2_1 ((uint32_t)0x00000020)
+#define GPIO_MODER_MODER3 ((uint32_t)0x000000C0)
+#define GPIO_MODER_MODER3_0 ((uint32_t)0x00000040)
+#define GPIO_MODER_MODER3_1 ((uint32_t)0x00000080)
+#define GPIO_MODER_MODER4 ((uint32_t)0x00000300)
+#define GPIO_MODER_MODER4_0 ((uint32_t)0x00000100)
+#define GPIO_MODER_MODER4_1 ((uint32_t)0x00000200)
+#define GPIO_MODER_MODER5 ((uint32_t)0x00000C00)
+#define GPIO_MODER_MODER5_0 ((uint32_t)0x00000400)
+#define GPIO_MODER_MODER5_1 ((uint32_t)0x00000800)
+#define GPIO_MODER_MODER6 ((uint32_t)0x00003000)
+#define GPIO_MODER_MODER6_0 ((uint32_t)0x00001000)
+#define GPIO_MODER_MODER6_1 ((uint32_t)0x00002000)
+#define GPIO_MODER_MODER7 ((uint32_t)0x0000C000)
+#define GPIO_MODER_MODER7_0 ((uint32_t)0x00004000)
+#define GPIO_MODER_MODER7_1 ((uint32_t)0x00008000)
+#define GPIO_MODER_MODER8 ((uint32_t)0x00030000)
+#define GPIO_MODER_MODER8_0 ((uint32_t)0x00010000)
+#define GPIO_MODER_MODER8_1 ((uint32_t)0x00020000)
+#define GPIO_MODER_MODER9 ((uint32_t)0x000C0000)
+#define GPIO_MODER_MODER9_0 ((uint32_t)0x00040000)
+#define GPIO_MODER_MODER9_1 ((uint32_t)0x00080000)
+#define GPIO_MODER_MODER10 ((uint32_t)0x00300000)
+#define GPIO_MODER_MODER10_0 ((uint32_t)0x00100000)
+#define GPIO_MODER_MODER10_1 ((uint32_t)0x00200000)
+#define GPIO_MODER_MODER11 ((uint32_t)0x00C00000)
+#define GPIO_MODER_MODER11_0 ((uint32_t)0x00400000)
+#define GPIO_MODER_MODER11_1 ((uint32_t)0x00800000)
+#define GPIO_MODER_MODER12 ((uint32_t)0x03000000)
+#define GPIO_MODER_MODER12_0 ((uint32_t)0x01000000)
+#define GPIO_MODER_MODER12_1 ((uint32_t)0x02000000)
+#define GPIO_MODER_MODER13 ((uint32_t)0x0C000000)
+#define GPIO_MODER_MODER13_0 ((uint32_t)0x04000000)
+#define GPIO_MODER_MODER13_1 ((uint32_t)0x08000000)
+#define GPIO_MODER_MODER14 ((uint32_t)0x30000000)
+#define GPIO_MODER_MODER14_0 ((uint32_t)0x10000000)
+#define GPIO_MODER_MODER14_1 ((uint32_t)0x20000000)
+#define GPIO_MODER_MODER15 ((uint32_t)0xC0000000)
+#define GPIO_MODER_MODER15_0 ((uint32_t)0x40000000)
+#define GPIO_MODER_MODER15_1 ((uint32_t)0x80000000)
+
+/****************** Bit definition for GPIO_OTYPER register *****************/
+#define GPIO_OTYPER_OT_0 ((uint32_t)0x00000001)
+#define GPIO_OTYPER_OT_1 ((uint32_t)0x00000002)
+#define GPIO_OTYPER_OT_2 ((uint32_t)0x00000004)
+#define GPIO_OTYPER_OT_3 ((uint32_t)0x00000008)
+#define GPIO_OTYPER_OT_4 ((uint32_t)0x00000010)
+#define GPIO_OTYPER_OT_5 ((uint32_t)0x00000020)
+#define GPIO_OTYPER_OT_6 ((uint32_t)0x00000040)
+#define GPIO_OTYPER_OT_7 ((uint32_t)0x00000080)
+#define GPIO_OTYPER_OT_8 ((uint32_t)0x00000100)
+#define GPIO_OTYPER_OT_9 ((uint32_t)0x00000200)
+#define GPIO_OTYPER_OT_10 ((uint32_t)0x00000400)
+#define GPIO_OTYPER_OT_11 ((uint32_t)0x00000800)
+#define GPIO_OTYPER_OT_12 ((uint32_t)0x00001000)
+#define GPIO_OTYPER_OT_13 ((uint32_t)0x00002000)
+#define GPIO_OTYPER_OT_14 ((uint32_t)0x00004000)
+#define GPIO_OTYPER_OT_15 ((uint32_t)0x00008000)
+
+/**************** Bit definition for GPIO_OSPEEDR register ******************/
+#define GPIO_OSPEEDR_OSPEEDR0 ((uint32_t)0x00000003)
+#define GPIO_OSPEEDR_OSPEEDR0_0 ((uint32_t)0x00000001)
+#define GPIO_OSPEEDR_OSPEEDR0_1 ((uint32_t)0x00000002)
+#define GPIO_OSPEEDR_OSPEEDR1 ((uint32_t)0x0000000C)
+#define GPIO_OSPEEDR_OSPEEDR1_0 ((uint32_t)0x00000004)
+#define GPIO_OSPEEDR_OSPEEDR1_1 ((uint32_t)0x00000008)
+#define GPIO_OSPEEDR_OSPEEDR2 ((uint32_t)0x00000030)
+#define GPIO_OSPEEDR_OSPEEDR2_0 ((uint32_t)0x00000010)
+#define GPIO_OSPEEDR_OSPEEDR2_1 ((uint32_t)0x00000020)
+#define GPIO_OSPEEDR_OSPEEDR3 ((uint32_t)0x000000C0)
+#define GPIO_OSPEEDR_OSPEEDR3_0 ((uint32_t)0x00000040)
+#define GPIO_OSPEEDR_OSPEEDR3_1 ((uint32_t)0x00000080)
+#define GPIO_OSPEEDR_OSPEEDR4 ((uint32_t)0x00000300)
+#define GPIO_OSPEEDR_OSPEEDR4_0 ((uint32_t)0x00000100)
+#define GPIO_OSPEEDR_OSPEEDR4_1 ((uint32_t)0x00000200)
+#define GPIO_OSPEEDR_OSPEEDR5 ((uint32_t)0x00000C00)
+#define GPIO_OSPEEDR_OSPEEDR5_0 ((uint32_t)0x00000400)
+#define GPIO_OSPEEDR_OSPEEDR5_1 ((uint32_t)0x00000800)
+#define GPIO_OSPEEDR_OSPEEDR6 ((uint32_t)0x00003000)
+#define GPIO_OSPEEDR_OSPEEDR6_0 ((uint32_t)0x00001000)
+#define GPIO_OSPEEDR_OSPEEDR6_1 ((uint32_t)0x00002000)
+#define GPIO_OSPEEDR_OSPEEDR7 ((uint32_t)0x0000C000)
+#define GPIO_OSPEEDR_OSPEEDR7_0 ((uint32_t)0x00004000)
+#define GPIO_OSPEEDR_OSPEEDR7_1 ((uint32_t)0x00008000)
+#define GPIO_OSPEEDR_OSPEEDR8 ((uint32_t)0x00030000)
+#define GPIO_OSPEEDR_OSPEEDR8_0 ((uint32_t)0x00010000)
+#define GPIO_OSPEEDR_OSPEEDR8_1 ((uint32_t)0x00020000)
+#define GPIO_OSPEEDR_OSPEEDR9 ((uint32_t)0x000C0000)
+#define GPIO_OSPEEDR_OSPEEDR9_0 ((uint32_t)0x00040000)
+#define GPIO_OSPEEDR_OSPEEDR9_1 ((uint32_t)0x00080000)
+#define GPIO_OSPEEDR_OSPEEDR10 ((uint32_t)0x00300000)
+#define GPIO_OSPEEDR_OSPEEDR10_0 ((uint32_t)0x00100000)
+#define GPIO_OSPEEDR_OSPEEDR10_1 ((uint32_t)0x00200000)
+#define GPIO_OSPEEDR_OSPEEDR11 ((uint32_t)0x00C00000)
+#define GPIO_OSPEEDR_OSPEEDR11_0 ((uint32_t)0x00400000)
+#define GPIO_OSPEEDR_OSPEEDR11_1 ((uint32_t)0x00800000)
+#define GPIO_OSPEEDR_OSPEEDR12 ((uint32_t)0x03000000)
+#define GPIO_OSPEEDR_OSPEEDR12_0 ((uint32_t)0x01000000)
+#define GPIO_OSPEEDR_OSPEEDR12_1 ((uint32_t)0x02000000)
+#define GPIO_OSPEEDR_OSPEEDR13 ((uint32_t)0x0C000000)
+#define GPIO_OSPEEDR_OSPEEDR13_0 ((uint32_t)0x04000000)
+#define GPIO_OSPEEDR_OSPEEDR13_1 ((uint32_t)0x08000000)
+#define GPIO_OSPEEDR_OSPEEDR14 ((uint32_t)0x30000000)
+#define GPIO_OSPEEDR_OSPEEDR14_0 ((uint32_t)0x10000000)
+#define GPIO_OSPEEDR_OSPEEDR14_1 ((uint32_t)0x20000000)
+#define GPIO_OSPEEDR_OSPEEDR15 ((uint32_t)0xC0000000)
+#define GPIO_OSPEEDR_OSPEEDR15_0 ((uint32_t)0x40000000)
+#define GPIO_OSPEEDR_OSPEEDR15_1 ((uint32_t)0x80000000)
+
+/* Old Bit definition for GPIO_OSPEEDR register maintained for legacy purpose */
+#define GPIO_OSPEEDER_OSPEEDR0 GPIO_OSPEEDR_OSPEEDR0
+#define GPIO_OSPEEDER_OSPEEDR0_0 GPIO_OSPEEDR_OSPEEDR0_0
+#define GPIO_OSPEEDER_OSPEEDR0_1 GPIO_OSPEEDR_OSPEEDR0_1
+#define GPIO_OSPEEDER_OSPEEDR1 GPIO_OSPEEDR_OSPEEDR1
+#define GPIO_OSPEEDER_OSPEEDR1_0 GPIO_OSPEEDR_OSPEEDR1_0
+#define GPIO_OSPEEDER_OSPEEDR1_1 GPIO_OSPEEDR_OSPEEDR1_1
+#define GPIO_OSPEEDER_OSPEEDR2 GPIO_OSPEEDR_OSPEEDR2
+#define GPIO_OSPEEDER_OSPEEDR2_0 GPIO_OSPEEDR_OSPEEDR2_0
+#define GPIO_OSPEEDER_OSPEEDR2_1 GPIO_OSPEEDR_OSPEEDR2_1
+#define GPIO_OSPEEDER_OSPEEDR3 GPIO_OSPEEDR_OSPEEDR3
+#define GPIO_OSPEEDER_OSPEEDR3_0 GPIO_OSPEEDR_OSPEEDR3_0
+#define GPIO_OSPEEDER_OSPEEDR3_1 GPIO_OSPEEDR_OSPEEDR3_1
+#define GPIO_OSPEEDER_OSPEEDR4 GPIO_OSPEEDR_OSPEEDR4
+#define GPIO_OSPEEDER_OSPEEDR4_0 GPIO_OSPEEDR_OSPEEDR4_0
+#define GPIO_OSPEEDER_OSPEEDR4_1 GPIO_OSPEEDR_OSPEEDR4_1
+#define GPIO_OSPEEDER_OSPEEDR5 GPIO_OSPEEDR_OSPEEDR5
+#define GPIO_OSPEEDER_OSPEEDR5_0 GPIO_OSPEEDR_OSPEEDR5_0
+#define GPIO_OSPEEDER_OSPEEDR5_1 GPIO_OSPEEDR_OSPEEDR5_1
+#define GPIO_OSPEEDER_OSPEEDR6 GPIO_OSPEEDR_OSPEEDR6
+#define GPIO_OSPEEDER_OSPEEDR6_0 GPIO_OSPEEDR_OSPEEDR6_0
+#define GPIO_OSPEEDER_OSPEEDR6_1 GPIO_OSPEEDR_OSPEEDR6_1
+#define GPIO_OSPEEDER_OSPEEDR7 GPIO_OSPEEDR_OSPEEDR7
+#define GPIO_OSPEEDER_OSPEEDR7_0 GPIO_OSPEEDR_OSPEEDR7_0
+#define GPIO_OSPEEDER_OSPEEDR7_1 GPIO_OSPEEDR_OSPEEDR7_1
+#define GPIO_OSPEEDER_OSPEEDR8 GPIO_OSPEEDR_OSPEEDR8
+#define GPIO_OSPEEDER_OSPEEDR8_0 GPIO_OSPEEDR_OSPEEDR8_0
+#define GPIO_OSPEEDER_OSPEEDR8_1 GPIO_OSPEEDR_OSPEEDR8_1
+#define GPIO_OSPEEDER_OSPEEDR9 GPIO_OSPEEDR_OSPEEDR9
+#define GPIO_OSPEEDER_OSPEEDR9_0 GPIO_OSPEEDR_OSPEEDR9_0
+#define GPIO_OSPEEDER_OSPEEDR9_1 GPIO_OSPEEDR_OSPEEDR9_1
+#define GPIO_OSPEEDER_OSPEEDR10 GPIO_OSPEEDR_OSPEEDR10
+#define GPIO_OSPEEDER_OSPEEDR10_0 GPIO_OSPEEDR_OSPEEDR10_0
+#define GPIO_OSPEEDER_OSPEEDR10_1 GPIO_OSPEEDR_OSPEEDR10_1
+#define GPIO_OSPEEDER_OSPEEDR11 GPIO_OSPEEDR_OSPEEDR11
+#define GPIO_OSPEEDER_OSPEEDR11_0 GPIO_OSPEEDR_OSPEEDR11_0
+#define GPIO_OSPEEDER_OSPEEDR11_1 GPIO_OSPEEDR_OSPEEDR11_1
+#define GPIO_OSPEEDER_OSPEEDR12 GPIO_OSPEEDR_OSPEEDR12
+#define GPIO_OSPEEDER_OSPEEDR12_0 GPIO_OSPEEDR_OSPEEDR12_0
+#define GPIO_OSPEEDER_OSPEEDR12_1 GPIO_OSPEEDR_OSPEEDR12_1
+#define GPIO_OSPEEDER_OSPEEDR13 GPIO_OSPEEDR_OSPEEDR13
+#define GPIO_OSPEEDER_OSPEEDR13_0 GPIO_OSPEEDR_OSPEEDR13_0
+#define GPIO_OSPEEDER_OSPEEDR13_1 GPIO_OSPEEDR_OSPEEDR13_1
+#define GPIO_OSPEEDER_OSPEEDR14 GPIO_OSPEEDR_OSPEEDR14
+#define GPIO_OSPEEDER_OSPEEDR14_0 GPIO_OSPEEDR_OSPEEDR14_0
+#define GPIO_OSPEEDER_OSPEEDR14_1 GPIO_OSPEEDR_OSPEEDR14_1
+#define GPIO_OSPEEDER_OSPEEDR15 GPIO_OSPEEDR_OSPEEDR15
+#define GPIO_OSPEEDER_OSPEEDR15_0 GPIO_OSPEEDR_OSPEEDR15_0
+#define GPIO_OSPEEDER_OSPEEDR15_1 GPIO_OSPEEDR_OSPEEDR15_1
+
+/******************* Bit definition for GPIO_PUPDR register ******************/
+#define GPIO_PUPDR_PUPDR0 ((uint32_t)0x00000003)
+#define GPIO_PUPDR_PUPDR0_0 ((uint32_t)0x00000001)
+#define GPIO_PUPDR_PUPDR0_1 ((uint32_t)0x00000002)
+#define GPIO_PUPDR_PUPDR1 ((uint32_t)0x0000000C)
+#define GPIO_PUPDR_PUPDR1_0 ((uint32_t)0x00000004)
+#define GPIO_PUPDR_PUPDR1_1 ((uint32_t)0x00000008)
+#define GPIO_PUPDR_PUPDR2 ((uint32_t)0x00000030)
+#define GPIO_PUPDR_PUPDR2_0 ((uint32_t)0x00000010)
+#define GPIO_PUPDR_PUPDR2_1 ((uint32_t)0x00000020)
+#define GPIO_PUPDR_PUPDR3 ((uint32_t)0x000000C0)
+#define GPIO_PUPDR_PUPDR3_0 ((uint32_t)0x00000040)
+#define GPIO_PUPDR_PUPDR3_1 ((uint32_t)0x00000080)
+#define GPIO_PUPDR_PUPDR4 ((uint32_t)0x00000300)
+#define GPIO_PUPDR_PUPDR4_0 ((uint32_t)0x00000100)
+#define GPIO_PUPDR_PUPDR4_1 ((uint32_t)0x00000200)
+#define GPIO_PUPDR_PUPDR5 ((uint32_t)0x00000C00)
+#define GPIO_PUPDR_PUPDR5_0 ((uint32_t)0x00000400)
+#define GPIO_PUPDR_PUPDR5_1 ((uint32_t)0x00000800)
+#define GPIO_PUPDR_PUPDR6 ((uint32_t)0x00003000)
+#define GPIO_PUPDR_PUPDR6_0 ((uint32_t)0x00001000)
+#define GPIO_PUPDR_PUPDR6_1 ((uint32_t)0x00002000)
+#define GPIO_PUPDR_PUPDR7 ((uint32_t)0x0000C000)
+#define GPIO_PUPDR_PUPDR7_0 ((uint32_t)0x00004000)
+#define GPIO_PUPDR_PUPDR7_1 ((uint32_t)0x00008000)
+#define GPIO_PUPDR_PUPDR8 ((uint32_t)0x00030000)
+#define GPIO_PUPDR_PUPDR8_0 ((uint32_t)0x00010000)
+#define GPIO_PUPDR_PUPDR8_1 ((uint32_t)0x00020000)
+#define GPIO_PUPDR_PUPDR9 ((uint32_t)0x000C0000)
+#define GPIO_PUPDR_PUPDR9_0 ((uint32_t)0x00040000)
+#define GPIO_PUPDR_PUPDR9_1 ((uint32_t)0x00080000)
+#define GPIO_PUPDR_PUPDR10 ((uint32_t)0x00300000)
+#define GPIO_PUPDR_PUPDR10_0 ((uint32_t)0x00100000)
+#define GPIO_PUPDR_PUPDR10_1 ((uint32_t)0x00200000)
+#define GPIO_PUPDR_PUPDR11 ((uint32_t)0x00C00000)
+#define GPIO_PUPDR_PUPDR11_0 ((uint32_t)0x00400000)
+#define GPIO_PUPDR_PUPDR11_1 ((uint32_t)0x00800000)
+#define GPIO_PUPDR_PUPDR12 ((uint32_t)0x03000000)
+#define GPIO_PUPDR_PUPDR12_0 ((uint32_t)0x01000000)
+#define GPIO_PUPDR_PUPDR12_1 ((uint32_t)0x02000000)
+#define GPIO_PUPDR_PUPDR13 ((uint32_t)0x0C000000)
+#define GPIO_PUPDR_PUPDR13_0 ((uint32_t)0x04000000)
+#define GPIO_PUPDR_PUPDR13_1 ((uint32_t)0x08000000)
+#define GPIO_PUPDR_PUPDR14 ((uint32_t)0x30000000)
+#define GPIO_PUPDR_PUPDR14_0 ((uint32_t)0x10000000)
+#define GPIO_PUPDR_PUPDR14_1 ((uint32_t)0x20000000)
+#define GPIO_PUPDR_PUPDR15 ((uint32_t)0xC0000000)
+#define GPIO_PUPDR_PUPDR15_0 ((uint32_t)0x40000000)
+#define GPIO_PUPDR_PUPDR15_1 ((uint32_t)0x80000000)
+
+/******************* Bit definition for GPIO_IDR register *******************/
+#define GPIO_IDR_0 ((uint32_t)0x00000001)
+#define GPIO_IDR_1 ((uint32_t)0x00000002)
+#define GPIO_IDR_2 ((uint32_t)0x00000004)
+#define GPIO_IDR_3 ((uint32_t)0x00000008)
+#define GPIO_IDR_4 ((uint32_t)0x00000010)
+#define GPIO_IDR_5 ((uint32_t)0x00000020)
+#define GPIO_IDR_6 ((uint32_t)0x00000040)
+#define GPIO_IDR_7 ((uint32_t)0x00000080)
+#define GPIO_IDR_8 ((uint32_t)0x00000100)
+#define GPIO_IDR_9 ((uint32_t)0x00000200)
+#define GPIO_IDR_10 ((uint32_t)0x00000400)
+#define GPIO_IDR_11 ((uint32_t)0x00000800)
+#define GPIO_IDR_12 ((uint32_t)0x00001000)
+#define GPIO_IDR_13 ((uint32_t)0x00002000)
+#define GPIO_IDR_14 ((uint32_t)0x00004000)
+#define GPIO_IDR_15 ((uint32_t)0x00008000)
+
+/****************** Bit definition for GPIO_ODR register ********************/
+#define GPIO_ODR_0 ((uint32_t)0x00000001)
+#define GPIO_ODR_1 ((uint32_t)0x00000002)
+#define GPIO_ODR_2 ((uint32_t)0x00000004)
+#define GPIO_ODR_3 ((uint32_t)0x00000008)
+#define GPIO_ODR_4 ((uint32_t)0x00000010)
+#define GPIO_ODR_5 ((uint32_t)0x00000020)
+#define GPIO_ODR_6 ((uint32_t)0x00000040)
+#define GPIO_ODR_7 ((uint32_t)0x00000080)
+#define GPIO_ODR_8 ((uint32_t)0x00000100)
+#define GPIO_ODR_9 ((uint32_t)0x00000200)
+#define GPIO_ODR_10 ((uint32_t)0x00000400)
+#define GPIO_ODR_11 ((uint32_t)0x00000800)
+#define GPIO_ODR_12 ((uint32_t)0x00001000)
+#define GPIO_ODR_13 ((uint32_t)0x00002000)
+#define GPIO_ODR_14 ((uint32_t)0x00004000)
+#define GPIO_ODR_15 ((uint32_t)0x00008000)
+
+/****************** Bit definition for GPIO_BSRR register ********************/
+#define GPIO_BSRR_BS_0 ((uint32_t)0x00000001)
+#define GPIO_BSRR_BS_1 ((uint32_t)0x00000002)
+#define GPIO_BSRR_BS_2 ((uint32_t)0x00000004)
+#define GPIO_BSRR_BS_3 ((uint32_t)0x00000008)
+#define GPIO_BSRR_BS_4 ((uint32_t)0x00000010)
+#define GPIO_BSRR_BS_5 ((uint32_t)0x00000020)
+#define GPIO_BSRR_BS_6 ((uint32_t)0x00000040)
+#define GPIO_BSRR_BS_7 ((uint32_t)0x00000080)
+#define GPIO_BSRR_BS_8 ((uint32_t)0x00000100)
+#define GPIO_BSRR_BS_9 ((uint32_t)0x00000200)
+#define GPIO_BSRR_BS_10 ((uint32_t)0x00000400)
+#define GPIO_BSRR_BS_11 ((uint32_t)0x00000800)
+#define GPIO_BSRR_BS_12 ((uint32_t)0x00001000)
+#define GPIO_BSRR_BS_13 ((uint32_t)0x00002000)
+#define GPIO_BSRR_BS_14 ((uint32_t)0x00004000)
+#define GPIO_BSRR_BS_15 ((uint32_t)0x00008000)
+#define GPIO_BSRR_BR_0 ((uint32_t)0x00010000)
+#define GPIO_BSRR_BR_1 ((uint32_t)0x00020000)
+#define GPIO_BSRR_BR_2 ((uint32_t)0x00040000)
+#define GPIO_BSRR_BR_3 ((uint32_t)0x00080000)
+#define GPIO_BSRR_BR_4 ((uint32_t)0x00100000)
+#define GPIO_BSRR_BR_5 ((uint32_t)0x00200000)
+#define GPIO_BSRR_BR_6 ((uint32_t)0x00400000)
+#define GPIO_BSRR_BR_7 ((uint32_t)0x00800000)
+#define GPIO_BSRR_BR_8 ((uint32_t)0x01000000)
+#define GPIO_BSRR_BR_9 ((uint32_t)0x02000000)
+#define GPIO_BSRR_BR_10 ((uint32_t)0x04000000)
+#define GPIO_BSRR_BR_11 ((uint32_t)0x08000000)
+#define GPIO_BSRR_BR_12 ((uint32_t)0x10000000)
+#define GPIO_BSRR_BR_13 ((uint32_t)0x20000000)
+#define GPIO_BSRR_BR_14 ((uint32_t)0x40000000)
+#define GPIO_BSRR_BR_15 ((uint32_t)0x80000000)
+
+/****************** Bit definition for GPIO_LCKR register ********************/
+#define GPIO_LCKR_LCK0 ((uint32_t)0x00000001)
+#define GPIO_LCKR_LCK1 ((uint32_t)0x00000002)
+#define GPIO_LCKR_LCK2 ((uint32_t)0x00000004)
+#define GPIO_LCKR_LCK3 ((uint32_t)0x00000008)
+#define GPIO_LCKR_LCK4 ((uint32_t)0x00000010)
+#define GPIO_LCKR_LCK5 ((uint32_t)0x00000020)
+#define GPIO_LCKR_LCK6 ((uint32_t)0x00000040)
+#define GPIO_LCKR_LCK7 ((uint32_t)0x00000080)
+#define GPIO_LCKR_LCK8 ((uint32_t)0x00000100)
+#define GPIO_LCKR_LCK9 ((uint32_t)0x00000200)
+#define GPIO_LCKR_LCK10 ((uint32_t)0x00000400)
+#define GPIO_LCKR_LCK11 ((uint32_t)0x00000800)
+#define GPIO_LCKR_LCK12 ((uint32_t)0x00001000)
+#define GPIO_LCKR_LCK13 ((uint32_t)0x00002000)
+#define GPIO_LCKR_LCK14 ((uint32_t)0x00004000)
+#define GPIO_LCKR_LCK15 ((uint32_t)0x00008000)
+#define GPIO_LCKR_LCKK ((uint32_t)0x00010000)
+
+/****************** Bit definition for GPIO_AFRL register ********************/
+#define GPIO_AFRL_AFRL0 ((uint32_t)0x0000000F)
+#define GPIO_AFRL_AFRL1 ((uint32_t)0x000000F0)
+#define GPIO_AFRL_AFRL2 ((uint32_t)0x00000F00)
+#define GPIO_AFRL_AFRL3 ((uint32_t)0x0000F000)
+#define GPIO_AFRL_AFRL4 ((uint32_t)0x000F0000)
+#define GPIO_AFRL_AFRL5 ((uint32_t)0x00F00000)
+#define GPIO_AFRL_AFRL6 ((uint32_t)0x0F000000)
+#define GPIO_AFRL_AFRL7 ((uint32_t)0xF0000000)
+
+/****************** Bit definition for GPIO_AFRH register ********************/
+#define GPIO_AFRH_AFRH0 ((uint32_t)0x0000000F)
+#define GPIO_AFRH_AFRH1 ((uint32_t)0x000000F0)
+#define GPIO_AFRH_AFRH2 ((uint32_t)0x00000F00)
+#define GPIO_AFRH_AFRH3 ((uint32_t)0x0000F000)
+#define GPIO_AFRH_AFRH4 ((uint32_t)0x000F0000)
+#define GPIO_AFRH_AFRH5 ((uint32_t)0x00F00000)
+#define GPIO_AFRH_AFRH6 ((uint32_t)0x0F000000)
+#define GPIO_AFRH_AFRH7 ((uint32_t)0xF0000000)
+
+/****************** Bit definition for GPIO_BRR register *********************/
+#define GPIO_BRR_BR_0 ((uint32_t)0x00000001)
+#define GPIO_BRR_BR_1 ((uint32_t)0x00000002)
+#define GPIO_BRR_BR_2 ((uint32_t)0x00000004)
+#define GPIO_BRR_BR_3 ((uint32_t)0x00000008)
+#define GPIO_BRR_BR_4 ((uint32_t)0x00000010)
+#define GPIO_BRR_BR_5 ((uint32_t)0x00000020)
+#define GPIO_BRR_BR_6 ((uint32_t)0x00000040)
+#define GPIO_BRR_BR_7 ((uint32_t)0x00000080)
+#define GPIO_BRR_BR_8 ((uint32_t)0x00000100)
+#define GPIO_BRR_BR_9 ((uint32_t)0x00000200)
+#define GPIO_BRR_BR_10 ((uint32_t)0x00000400)
+#define GPIO_BRR_BR_11 ((uint32_t)0x00000800)
+#define GPIO_BRR_BR_12 ((uint32_t)0x00001000)
+#define GPIO_BRR_BR_13 ((uint32_t)0x00002000)
+#define GPIO_BRR_BR_14 ((uint32_t)0x00004000)
+#define GPIO_BRR_BR_15 ((uint32_t)0x00008000)
+
+/******************************************************************************/
+/* */
+/* Inter-integrated Circuit Interface (I2C) */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for I2C_CR1 register *******************/
+#define I2C_CR1_PE ((uint32_t)0x00000001) /*!< Peripheral enable */
+#define I2C_CR1_TXIE ((uint32_t)0x00000002) /*!< TX interrupt enable */
+#define I2C_CR1_RXIE ((uint32_t)0x00000004) /*!< RX interrupt enable */
+#define I2C_CR1_ADDRIE ((uint32_t)0x00000008) /*!< Address match interrupt enable */
+#define I2C_CR1_NACKIE ((uint32_t)0x00000010) /*!< NACK received interrupt enable */
+#define I2C_CR1_STOPIE ((uint32_t)0x00000020) /*!< STOP detection interrupt enable */
+#define I2C_CR1_TCIE ((uint32_t)0x00000040) /*!< Transfer complete interrupt enable */
+#define I2C_CR1_ERRIE ((uint32_t)0x00000080) /*!< Errors interrupt enable */
+#define I2C_CR1_DFN ((uint32_t)0x00000F00) /*!< Digital noise filter */
+#define I2C_CR1_ANFOFF ((uint32_t)0x00001000) /*!< Analog noise filter OFF */
+#define I2C_CR1_SWRST ((uint32_t)0x00002000) /*!< Software reset */
+#define I2C_CR1_TXDMAEN ((uint32_t)0x00004000) /*!< DMA transmission requests enable */
+#define I2C_CR1_RXDMAEN ((uint32_t)0x00008000) /*!< DMA reception requests enable */
+#define I2C_CR1_SBC ((uint32_t)0x00010000) /*!< Slave byte control */
+#define I2C_CR1_NOSTRETCH ((uint32_t)0x00020000) /*!< Clock stretching disable */
+#define I2C_CR1_WUPEN ((uint32_t)0x00040000) /*!< Wakeup from STOP enable */
+#define I2C_CR1_GCEN ((uint32_t)0x00080000) /*!< General call enable */
+#define I2C_CR1_SMBHEN ((uint32_t)0x00100000) /*!< SMBus host address enable */
+#define I2C_CR1_SMBDEN ((uint32_t)0x00200000) /*!< SMBus device default address enable */
+#define I2C_CR1_ALERTEN ((uint32_t)0x00400000) /*!< SMBus alert enable */
+#define I2C_CR1_PECEN ((uint32_t)0x00800000) /*!< PEC enable */
+
+/****************** Bit definition for I2C_CR2 register ********************/
+#define I2C_CR2_SADD ((uint32_t)0x000003FF) /*!< Slave address (master mode) */
+#define I2C_CR2_RD_WRN ((uint32_t)0x00000400) /*!< Transfer direction (master mode) */
+#define I2C_CR2_ADD10 ((uint32_t)0x00000800) /*!< 10-bit addressing mode (master mode) */
+#define I2C_CR2_HEAD10R ((uint32_t)0x00001000) /*!< 10-bit address header only read direction (master mode) */
+#define I2C_CR2_START ((uint32_t)0x00002000) /*!< START generation */
+#define I2C_CR2_STOP ((uint32_t)0x00004000) /*!< STOP generation (master mode) */
+#define I2C_CR2_NACK ((uint32_t)0x00008000) /*!< NACK generation (slave mode) */
+#define I2C_CR2_NBYTES ((uint32_t)0x00FF0000) /*!< Number of bytes */
+#define I2C_CR2_RELOAD ((uint32_t)0x01000000) /*!< NBYTES reload mode */
+#define I2C_CR2_AUTOEND ((uint32_t)0x02000000) /*!< Automatic end mode (master mode) */
+#define I2C_CR2_PECBYTE ((uint32_t)0x04000000) /*!< Packet error checking byte */
+
+/******************* Bit definition for I2C_OAR1 register ******************/
+#define I2C_OAR1_OA1 ((uint32_t)0x000003FF) /*!< Interface own address 1 */
+#define I2C_OAR1_OA1MODE ((uint32_t)0x00000400) /*!< Own address 1 10-bit mode */
+#define I2C_OAR1_OA1EN ((uint32_t)0x00008000) /*!< Own address 1 enable */
+
+/******************* Bit definition for I2C_OAR2 register ******************/
+#define I2C_OAR2_OA2 ((uint32_t)0x000000FE) /*!< Interface own address 2 */
+#define I2C_OAR2_OA2MSK ((uint32_t)0x00000700) /*!< Own address 2 masks */
+#define I2C_OAR2_OA2EN ((uint32_t)0x00008000) /*!< Own address 2 enable */
+
+/******************* Bit definition for I2C_TIMINGR register ****************/
+#define I2C_TIMINGR_SCLL ((uint32_t)0x000000FF) /*!< SCL low period (master mode) */
+#define I2C_TIMINGR_SCLH ((uint32_t)0x0000FF00) /*!< SCL high period (master mode) */
+#define I2C_TIMINGR_SDADEL ((uint32_t)0x000F0000) /*!< Data hold time */
+#define I2C_TIMINGR_SCLDEL ((uint32_t)0x00F00000) /*!< Data setup time */
+#define I2C_TIMINGR_PRESC ((uint32_t)0xF0000000) /*!< Timings prescaler */
+
+/******************* Bit definition for I2C_TIMEOUTR register ****************/
+#define I2C_TIMEOUTR_TIMEOUTA ((uint32_t)0x00000FFF) /*!< Bus timeout A */
+#define I2C_TIMEOUTR_TIDLE ((uint32_t)0x00001000) /*!< Idle clock timeout detection */
+#define I2C_TIMEOUTR_TIMOUTEN ((uint32_t)0x00008000) /*!< Clock timeout enable */
+#define I2C_TIMEOUTR_TIMEOUTB ((uint32_t)0x0FFF0000) /*!< Bus timeout B*/
+#define I2C_TIMEOUTR_TEXTEN ((uint32_t)0x80000000) /*!< Extended clock timeout enable */
+
+/****************** Bit definition for I2C_ISR register ********************/
+#define I2C_ISR_TXE ((uint32_t)0x00000001) /*!< Transmit data register empty */
+#define I2C_ISR_TXIS ((uint32_t)0x00000002) /*!< Transmit interrupt status */
+#define I2C_ISR_RXNE ((uint32_t)0x00000004) /*!< Receive data register not empty */
+#define I2C_ISR_ADDR ((uint32_t)0x00000008) /*!< Address matched (slave mode)*/
+#define I2C_ISR_NACKF ((uint32_t)0x00000010) /*!< NACK received flag */
+#define I2C_ISR_STOPF ((uint32_t)0x00000020) /*!< STOP detection flag */
+#define I2C_ISR_TC ((uint32_t)0x00000040) /*!< Transfer complete (master mode) */
+#define I2C_ISR_TCR ((uint32_t)0x00000080) /*!< Transfer complete reload */
+#define I2C_ISR_BERR ((uint32_t)0x00000100) /*!< Bus error */
+#define I2C_ISR_ARLO ((uint32_t)0x00000200) /*!< Arbitration lost */
+#define I2C_ISR_OVR ((uint32_t)0x00000400) /*!< Overrun/Underrun */
+#define I2C_ISR_PECERR ((uint32_t)0x00000800) /*!< PEC error in reception */
+#define I2C_ISR_TIMEOUT ((uint32_t)0x00001000) /*!< Timeout or Tlow detection flag */
+#define I2C_ISR_ALERT ((uint32_t)0x00002000) /*!< SMBus alert */
+#define I2C_ISR_BUSY ((uint32_t)0x00008000) /*!< Bus busy */
+#define I2C_ISR_DIR ((uint32_t)0x00010000) /*!< Transfer direction (slave mode) */
+#define I2C_ISR_ADDCODE ((uint32_t)0x00FE0000) /*!< Address match code (slave mode) */
+
+/****************** Bit definition for I2C_ICR register ********************/
+#define I2C_ICR_ADDRCF ((uint32_t)0x00000008) /*!< Address matched clear flag */
+#define I2C_ICR_NACKCF ((uint32_t)0x00000010) /*!< NACK clear flag */
+#define I2C_ICR_STOPCF ((uint32_t)0x00000020) /*!< STOP detection clear flag */
+#define I2C_ICR_BERRCF ((uint32_t)0x00000100) /*!< Bus error clear flag */
+#define I2C_ICR_ARLOCF ((uint32_t)0x00000200) /*!< Arbitration lost clear flag */
+#define I2C_ICR_OVRCF ((uint32_t)0x00000400) /*!< Overrun/Underrun clear flag */
+#define I2C_ICR_PECCF ((uint32_t)0x00000800) /*!< PAC error clear flag */
+#define I2C_ICR_TIMOUTCF ((uint32_t)0x00001000) /*!< Timeout clear flag */
+#define I2C_ICR_ALERTCF ((uint32_t)0x00002000) /*!< Alert clear flag */
+
+/****************** Bit definition for I2C_PECR register *******************/
+#define I2C_PECR_PEC ((uint32_t)0x000000FF) /*!< PEC register */
+
+/****************** Bit definition for I2C_RXDR register *********************/
+#define I2C_RXDR_RXDATA ((uint32_t)0x000000FF) /*!< 8-bit receive data */
+
+/****************** Bit definition for I2C_TXDR register *******************/
+#define I2C_TXDR_TXDATA ((uint32_t)0x000000FF) /*!< 8-bit transmit data */
+
+/*****************************************************************************/
+/* */
+/* Independent WATCHDOG (IWDG) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for IWDG_KR register *******************/
+#define IWDG_KR_KEY ((uint32_t)0xFFFF) /*!< Key value (write only, read 0000h) */
+
+/******************* Bit definition for IWDG_PR register *******************/
+#define IWDG_PR_PR ((uint32_t)0x07) /*!< PR[2:0] (Prescaler divider) */
+#define IWDG_PR_PR_0 ((uint32_t)0x01) /*!< Bit 0 */
+#define IWDG_PR_PR_1 ((uint32_t)0x02) /*!< Bit 1 */
+#define IWDG_PR_PR_2 ((uint32_t)0x04) /*!< Bit 2 */
+
+/******************* Bit definition for IWDG_RLR register ******************/
+#define IWDG_RLR_RL ((uint32_t)0x0FFF) /*!< Watchdog counter reload value */
+
+/******************* Bit definition for IWDG_SR register *******************/
+#define IWDG_SR_PVU ((uint32_t)0x01) /*!< Watchdog prescaler value update */
+#define IWDG_SR_RVU ((uint32_t)0x02) /*!< Watchdog counter reload value update */
+#define IWDG_SR_WVU ((uint32_t)0x04) /*!< Watchdog counter window value update */
+
+/******************* Bit definition for IWDG_KR register *******************/
+#define IWDG_WINR_WIN ((uint32_t)0x0FFF) /*!< Watchdog counter window value */
+
+/*****************************************************************************/
+/* */
+/* Power Control (PWR) */
+/* */
+/*****************************************************************************/
+
+/******************** Bit definition for PWR_CR register *******************/
+#define PWR_CR_LPDS ((uint32_t)0x00000001) /*!< Low-power Deepsleep */
+#define PWR_CR_PDDS ((uint32_t)0x00000002) /*!< Power Down Deepsleep */
+#define PWR_CR_CWUF ((uint32_t)0x00000004) /*!< Clear Wakeup Flag */
+#define PWR_CR_CSBF ((uint32_t)0x00000008) /*!< Clear Standby Flag */
+#define PWR_CR_PVDE ((uint32_t)0x00000010) /*!< Power Voltage Detector Enable */
+
+#define PWR_CR_PLS ((uint32_t)0x000000E0) /*!< PLS[2:0] bits (PVD Level Selection) */
+#define PWR_CR_PLS_0 ((uint32_t)0x00000020) /*!< Bit 0 */
+#define PWR_CR_PLS_1 ((uint32_t)0x00000040) /*!< Bit 1 */
+#define PWR_CR_PLS_2 ((uint32_t)0x00000080) /*!< Bit 2 */
+
+/*!< PVD level configuration */
+#define PWR_CR_PLS_LEV0 ((uint32_t)0x00000000) /*!< PVD level 0 */
+#define PWR_CR_PLS_LEV1 ((uint32_t)0x00000020) /*!< PVD level 1 */
+#define PWR_CR_PLS_LEV2 ((uint32_t)0x00000040) /*!< PVD level 2 */
+#define PWR_CR_PLS_LEV3 ((uint32_t)0x00000060) /*!< PVD level 3 */
+#define PWR_CR_PLS_LEV4 ((uint32_t)0x00000080) /*!< PVD level 4 */
+#define PWR_CR_PLS_LEV5 ((uint32_t)0x000000A0) /*!< PVD level 5 */
+#define PWR_CR_PLS_LEV6 ((uint32_t)0x000000C0) /*!< PVD level 6 */
+#define PWR_CR_PLS_LEV7 ((uint32_t)0x000000E0) /*!< PVD level 7 */
+
+#define PWR_CR_DBP ((uint32_t)0x00000100) /*!< Disable Backup Domain write protection */
+
+/******************* Bit definition for PWR_CSR register *******************/
+#define PWR_CSR_WUF ((uint32_t)0x00000001) /*!< Wakeup Flag */
+#define PWR_CSR_SBF ((uint32_t)0x00000002) /*!< Standby Flag */
+#define PWR_CSR_PVDO ((uint32_t)0x00000004) /*!< PVD Output */
+#define PWR_CSR_VREFINTRDYF ((uint32_t)0x00000008) /*!< Internal voltage reference (VREFINT) ready flag */
+
+#define PWR_CSR_EWUP1 ((uint32_t)0x00000100) /*!< Enable WKUP pin 1 */
+#define PWR_CSR_EWUP2 ((uint32_t)0x00000200) /*!< Enable WKUP pin 2 */
+
+/*****************************************************************************/
+/* */
+/* Reset and Clock Control */
+/* */
+/*****************************************************************************/
+
+/******************** Bit definition for RCC_CR register *******************/
+#define RCC_CR_HSION ((uint32_t)0x00000001) /*!< Internal High Speed clock enable */
+#define RCC_CR_HSIRDY ((uint32_t)0x00000002) /*!< Internal High Speed clock ready flag */
+
+#define RCC_CR_HSITRIM ((uint32_t)0x000000F8) /*!< Internal High Speed clock trimming */
+#define RCC_CR_HSITRIM_0 ((uint32_t)0x00000008) /*!<Bit 0 */
+#define RCC_CR_HSITRIM_1 ((uint32_t)0x00000010) /*!<Bit 1 */
+#define RCC_CR_HSITRIM_2 ((uint32_t)0x00000020) /*!<Bit 2 */
+#define RCC_CR_HSITRIM_3 ((uint32_t)0x00000040) /*!<Bit 3 */
+#define RCC_CR_HSITRIM_4 ((uint32_t)0x00000080) /*!<Bit 4 */
+
+#define RCC_CR_HSICAL ((uint32_t)0x0000FF00) /*!< Internal High Speed clock Calibration */
+#define RCC_CR_HSICAL_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define RCC_CR_HSICAL_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define RCC_CR_HSICAL_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define RCC_CR_HSICAL_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define RCC_CR_HSICAL_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+#define RCC_CR_HSICAL_5 ((uint32_t)0x00002000) /*!<Bit 5 */
+#define RCC_CR_HSICAL_6 ((uint32_t)0x00004000) /*!<Bit 6 */
+#define RCC_CR_HSICAL_7 ((uint32_t)0x00008000) /*!<Bit 7 */
+
+#define RCC_CR_HSEON ((uint32_t)0x00010000) /*!< External High Speed clock enable */
+#define RCC_CR_HSERDY ((uint32_t)0x00020000) /*!< External High Speed clock ready flag */
+#define RCC_CR_HSEBYP ((uint32_t)0x00040000) /*!< External High Speed clock Bypass */
+#define RCC_CR_CSSON ((uint32_t)0x00080000) /*!< Clock Security System enable */
+#define RCC_CR_PLLON ((uint32_t)0x01000000) /*!< PLL enable */
+#define RCC_CR_PLLRDY ((uint32_t)0x02000000) /*!< PLL clock ready flag */
+
+/******************** Bit definition for RCC_CFGR register *****************/
+/*!< SW configuration */
+#define RCC_CFGR_SW ((uint32_t)0x00000003) /*!< SW[1:0] bits (System clock Switch) */
+#define RCC_CFGR_SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR_SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+#define RCC_CFGR_SW_HSI ((uint32_t)0x00000000) /*!< HSI selected as system clock */
+#define RCC_CFGR_SW_HSE ((uint32_t)0x00000001) /*!< HSE selected as system clock */
+#define RCC_CFGR_SW_PLL ((uint32_t)0x00000002) /*!< PLL selected as system clock */
+
+/*!< SWS configuration */
+#define RCC_CFGR_SWS ((uint32_t)0x0000000C) /*!< SWS[1:0] bits (System Clock Switch Status) */
+#define RCC_CFGR_SWS_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define RCC_CFGR_SWS_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+
+#define RCC_CFGR_SWS_HSI ((uint32_t)0x00000000) /*!< HSI oscillator used as system clock */
+#define RCC_CFGR_SWS_HSE ((uint32_t)0x00000004) /*!< HSE oscillator used as system clock */
+#define RCC_CFGR_SWS_PLL ((uint32_t)0x00000008) /*!< PLL used as system clock */
+
+/*!< HPRE configuration */
+#define RCC_CFGR_HPRE ((uint32_t)0x000000F0) /*!< HPRE[3:0] bits (AHB prescaler) */
+#define RCC_CFGR_HPRE_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define RCC_CFGR_HPRE_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define RCC_CFGR_HPRE_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+#define RCC_CFGR_HPRE_3 ((uint32_t)0x00000080) /*!< Bit 3 */
+
+#define RCC_CFGR_HPRE_DIV1 ((uint32_t)0x00000000) /*!< SYSCLK not divided */
+#define RCC_CFGR_HPRE_DIV2 ((uint32_t)0x00000080) /*!< SYSCLK divided by 2 */
+#define RCC_CFGR_HPRE_DIV4 ((uint32_t)0x00000090) /*!< SYSCLK divided by 4 */
+#define RCC_CFGR_HPRE_DIV8 ((uint32_t)0x000000A0) /*!< SYSCLK divided by 8 */
+#define RCC_CFGR_HPRE_DIV16 ((uint32_t)0x000000B0) /*!< SYSCLK divided by 16 */
+#define RCC_CFGR_HPRE_DIV64 ((uint32_t)0x000000C0) /*!< SYSCLK divided by 64 */
+#define RCC_CFGR_HPRE_DIV128 ((uint32_t)0x000000D0) /*!< SYSCLK divided by 128 */
+#define RCC_CFGR_HPRE_DIV256 ((uint32_t)0x000000E0) /*!< SYSCLK divided by 256 */
+#define RCC_CFGR_HPRE_DIV512 ((uint32_t)0x000000F0) /*!< SYSCLK divided by 512 */
+
+/*!< PPRE configuration */
+#define RCC_CFGR_PPRE ((uint32_t)0x00000700) /*!< PRE[2:0] bits (APB prescaler) */
+#define RCC_CFGR_PPRE_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define RCC_CFGR_PPRE_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define RCC_CFGR_PPRE_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+
+#define RCC_CFGR_PPRE_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */
+#define RCC_CFGR_PPRE_DIV2 ((uint32_t)0x00000400) /*!< HCLK divided by 2 */
+#define RCC_CFGR_PPRE_DIV4 ((uint32_t)0x00000500) /*!< HCLK divided by 4 */
+#define RCC_CFGR_PPRE_DIV8 ((uint32_t)0x00000600) /*!< HCLK divided by 8 */
+#define RCC_CFGR_PPRE_DIV16 ((uint32_t)0x00000700) /*!< HCLK divided by 16 */
+
+/*!< ADCPPRE configuration */
+#define RCC_CFGR_ADCPRE ((uint32_t)0x00004000) /*!< ADCPRE bit (ADC prescaler) */
+
+#define RCC_CFGR_ADCPRE_DIV2 ((uint32_t)0x00000000) /*!< PCLK divided by 2 */
+#define RCC_CFGR_ADCPRE_DIV4 ((uint32_t)0x00004000) /*!< PCLK divided by 4 */
+
+#define RCC_CFGR_PLLSRC ((uint32_t)0x00010000) /*!< PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSI_DIV2 ((uint32_t)0x00000000) /*!< HSI clock divided by 2 selected as PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSE_PREDIV ((uint32_t)0x00010000) /*!< HSE/PREDIV clock selected as PLL entry clock source */
+
+#define RCC_CFGR_PLLXTPRE ((uint32_t)0x00020000) /*!< HSE divider for PLL entry */
+#define RCC_CFGR_PLLXTPRE_HSE_PREDIV_DIV1 ((uint32_t)0x00000000) /*!< HSE/PREDIV clock not divided for PLL entry */
+#define RCC_CFGR_PLLXTPRE_HSE_PREDIV_DIV2 ((uint32_t)0x00020000) /*!< HSE/PREDIV clock divided by 2 for PLL entry */
+
+/*!< PLLMUL configuration */
+#define RCC_CFGR_PLLMUL ((uint32_t)0x003C0000) /*!< PLLMUL[3:0] bits (PLL multiplication factor) */
+#define RCC_CFGR_PLLMUL_0 ((uint32_t)0x00040000) /*!< Bit 0 */
+#define RCC_CFGR_PLLMUL_1 ((uint32_t)0x00080000) /*!< Bit 1 */
+#define RCC_CFGR_PLLMUL_2 ((uint32_t)0x00100000) /*!< Bit 2 */
+#define RCC_CFGR_PLLMUL_3 ((uint32_t)0x00200000) /*!< Bit 3 */
+
+#define RCC_CFGR_PLLMUL2 ((uint32_t)0x00000000) /*!< PLL input clock*2 */
+#define RCC_CFGR_PLLMUL3 ((uint32_t)0x00040000) /*!< PLL input clock*3 */
+#define RCC_CFGR_PLLMUL4 ((uint32_t)0x00080000) /*!< PLL input clock*4 */
+#define RCC_CFGR_PLLMUL5 ((uint32_t)0x000C0000) /*!< PLL input clock*5 */
+#define RCC_CFGR_PLLMUL6 ((uint32_t)0x00100000) /*!< PLL input clock*6 */
+#define RCC_CFGR_PLLMUL7 ((uint32_t)0x00140000) /*!< PLL input clock*7 */
+#define RCC_CFGR_PLLMUL8 ((uint32_t)0x00180000) /*!< PLL input clock*8 */
+#define RCC_CFGR_PLLMUL9 ((uint32_t)0x001C0000) /*!< PLL input clock*9 */
+#define RCC_CFGR_PLLMUL10 ((uint32_t)0x00200000) /*!< PLL input clock10 */
+#define RCC_CFGR_PLLMUL11 ((uint32_t)0x00240000) /*!< PLL input clock*11 */
+#define RCC_CFGR_PLLMUL12 ((uint32_t)0x00280000) /*!< PLL input clock*12 */
+#define RCC_CFGR_PLLMUL13 ((uint32_t)0x002C0000) /*!< PLL input clock*13 */
+#define RCC_CFGR_PLLMUL14 ((uint32_t)0x00300000) /*!< PLL input clock*14 */
+#define RCC_CFGR_PLLMUL15 ((uint32_t)0x00340000) /*!< PLL input clock*15 */
+#define RCC_CFGR_PLLMUL16 ((uint32_t)0x00380000) /*!< PLL input clock*16 */
+
+/*!< MCO configuration */
+#define RCC_CFGR_MCO ((uint32_t)0x0F000000) /*!< MCO[3:0] bits (Microcontroller Clock Output) */
+#define RCC_CFGR_MCO_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define RCC_CFGR_MCO_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define RCC_CFGR_MCO_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+
+#define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
+#define RCC_CFGR_MCO_HSI14 ((uint32_t)0x01000000) /*!< HSI14 clock selected as MCO source */
+#define RCC_CFGR_MCO_LSI ((uint32_t)0x02000000) /*!< LSI clock selected as MCO source */
+#define RCC_CFGR_MCO_LSE ((uint32_t)0x03000000) /*!< LSE clock selected as MCO source */
+#define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x04000000) /*!< System clock selected as MCO source */
+#define RCC_CFGR_MCO_HSI ((uint32_t)0x05000000) /*!< HSI clock selected as MCO source */
+#define RCC_CFGR_MCO_HSE ((uint32_t)0x06000000) /*!< HSE clock selected as MCO source */
+#define RCC_CFGR_MCO_PLL ((uint32_t)0x07000000) /*!< PLL clock divided by 2 selected as MCO source */
+
+/*!<****************** Bit definition for RCC_CIR register *****************/
+#define RCC_CIR_LSIRDYF ((uint32_t)0x00000001) /*!< LSI Ready Interrupt flag */
+#define RCC_CIR_LSERDYF ((uint32_t)0x00000002) /*!< LSE Ready Interrupt flag */
+#define RCC_CIR_HSIRDYF ((uint32_t)0x00000004) /*!< HSI Ready Interrupt flag */
+#define RCC_CIR_HSERDYF ((uint32_t)0x00000008) /*!< HSE Ready Interrupt flag */
+#define RCC_CIR_PLLRDYF ((uint32_t)0x00000010) /*!< PLL Ready Interrupt flag */
+#define RCC_CIR_HSI14RDYF ((uint32_t)0x00000020) /*!< HSI14 Ready Interrupt flag */
+#define RCC_CIR_CSSF ((uint32_t)0x00000080) /*!< Clock Security System Interrupt flag */
+#define RCC_CIR_LSIRDYIE ((uint32_t)0x00000100) /*!< LSI Ready Interrupt Enable */
+#define RCC_CIR_LSERDYIE ((uint32_t)0x00000200) /*!< LSE Ready Interrupt Enable */
+#define RCC_CIR_HSIRDYIE ((uint32_t)0x00000400) /*!< HSI Ready Interrupt Enable */
+#define RCC_CIR_HSERDYIE ((uint32_t)0x00000800) /*!< HSE Ready Interrupt Enable */
+#define RCC_CIR_PLLRDYIE ((uint32_t)0x00001000) /*!< PLL Ready Interrupt Enable */
+#define RCC_CIR_HSI14RDYIE ((uint32_t)0x00002000) /*!< HSI14 Ready Interrupt Enable */
+#define RCC_CIR_LSIRDYC ((uint32_t)0x00010000) /*!< LSI Ready Interrupt Clear */
+#define RCC_CIR_LSERDYC ((uint32_t)0x00020000) /*!< LSE Ready Interrupt Clear */
+#define RCC_CIR_HSIRDYC ((uint32_t)0x00040000) /*!< HSI Ready Interrupt Clear */
+#define RCC_CIR_HSERDYC ((uint32_t)0x00080000) /*!< HSE Ready Interrupt Clear */
+#define RCC_CIR_PLLRDYC ((uint32_t)0x00100000) /*!< PLL Ready Interrupt Clear */
+#define RCC_CIR_HSI14RDYC ((uint32_t)0x00200000) /*!< HSI14 Ready Interrupt Clear */
+#define RCC_CIR_CSSC ((uint32_t)0x00800000) /*!< Clock Security System Interrupt Clear */
+
+/***************** Bit definition for RCC_APB2RSTR register ****************/
+#define RCC_APB2RSTR_SYSCFGRST ((uint32_t)0x00000001) /*!< SYSCFG clock reset */
+#define RCC_APB2RSTR_ADCRST ((uint32_t)0x00000200) /*!< ADC clock reset */
+#define RCC_APB2RSTR_TIM1RST ((uint32_t)0x00000800) /*!< TIM1 clock reset */
+#define RCC_APB2RSTR_SPI1RST ((uint32_t)0x00001000) /*!< SPI1 clock reset */
+#define RCC_APB2RSTR_USART1RST ((uint32_t)0x00004000) /*!< USART1 clock reset */
+#define RCC_APB2RSTR_TIM15RST ((uint32_t)0x00010000) /*!< TIM15 clock reset */
+#define RCC_APB2RSTR_TIM16RST ((uint32_t)0x00020000) /*!< TIM16 clock reset */
+#define RCC_APB2RSTR_TIM17RST ((uint32_t)0x00040000) /*!< TIM17 clock reset */
+#define RCC_APB2RSTR_DBGMCURST ((uint32_t)0x00400000) /*!< DBGMCU clock reset */
+
+/*!< Old ADC1 clock reset bit definition maintained for legacy purpose */
+#define RCC_APB2RSTR_ADC1RST RCC_APB2RSTR_ADCRST
+
+/***************** Bit definition for RCC_APB1RSTR register ****************/
+#define RCC_APB1RSTR_TIM2RST ((uint32_t)0x00000001) /*!< Timer 2 clock reset */
+#define RCC_APB1RSTR_TIM3RST ((uint32_t)0x00000002) /*!< Timer 3 clock reset */
+#define RCC_APB1RSTR_TIM6RST ((uint32_t)0x00000010) /*!< Timer 6 clock reset */
+#define RCC_APB1RSTR_TIM14RST ((uint32_t)0x00000100) /*!< Timer 14 clock reset */
+#define RCC_APB1RSTR_WWDGRST ((uint32_t)0x00000800) /*!< Window Watchdog clock reset */
+#define RCC_APB1RSTR_SPI2RST ((uint32_t)0x00004000) /*!< SPI2 clock reset */
+#define RCC_APB1RSTR_USART2RST ((uint32_t)0x00020000) /*!< USART 2 clock reset */
+#define RCC_APB1RSTR_I2C1RST ((uint32_t)0x00200000) /*!< I2C 1 clock reset */
+#define RCC_APB1RSTR_I2C2RST ((uint32_t)0x00400000) /*!< I2C 2 clock reset */
+#define RCC_APB1RSTR_PWRRST ((uint32_t)0x10000000) /*!< PWR clock reset */
+#define RCC_APB1RSTR_DACRST ((uint32_t)0x20000000) /*!< DAC clock reset */
+#define RCC_APB1RSTR_CECRST ((uint32_t)0x40000000) /*!< CEC clock reset */
+
+/****************** Bit definition for RCC_AHBENR register *****************/
+#define RCC_AHBENR_DMAEN ((uint32_t)0x00000001) /*!< DMA1 clock enable */
+#define RCC_AHBENR_SRAMEN ((uint32_t)0x00000004) /*!< SRAM interface clock enable */
+#define RCC_AHBENR_FLITFEN ((uint32_t)0x00000010) /*!< FLITF clock enable */
+#define RCC_AHBENR_CRCEN ((uint32_t)0x00000040) /*!< CRC clock enable */
+#define RCC_AHBENR_GPIOAEN ((uint32_t)0x00020000) /*!< GPIOA clock enable */
+#define RCC_AHBENR_GPIOBEN ((uint32_t)0x00040000) /*!< GPIOB clock enable */
+#define RCC_AHBENR_GPIOCEN ((uint32_t)0x00080000) /*!< GPIOC clock enable */
+#define RCC_AHBENR_GPIODEN ((uint32_t)0x00100000) /*!< GPIOD clock enable */
+#define RCC_AHBENR_GPIOFEN ((uint32_t)0x00400000) /*!< GPIOF clock enable */
+#define RCC_AHBENR_TSCEN ((uint32_t)0x01000000) /*!< TS controller clock enable */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_AHBENR_DMA1EN RCC_AHBENR_DMAEN /*!< DMA1 clock enable */
+#define RCC_AHBENR_TSEN RCC_AHBENR_TSCEN /*!< TS clock enable */
+
+/***************** Bit definition for RCC_APB2ENR register *****************/
+#define RCC_APB2ENR_SYSCFGCOMPEN ((uint32_t)0x00000001) /*!< SYSCFG and comparator clock enable */
+#define RCC_APB2ENR_ADCEN ((uint32_t)0x00000200) /*!< ADC1 clock enable */
+#define RCC_APB2ENR_TIM1EN ((uint32_t)0x00000800) /*!< TIM1 clock enable */
+#define RCC_APB2ENR_SPI1EN ((uint32_t)0x00001000) /*!< SPI1 clock enable */
+#define RCC_APB2ENR_USART1EN ((uint32_t)0x00004000) /*!< USART1 clock enable */
+#define RCC_APB2ENR_TIM15EN ((uint32_t)0x00010000) /*!< TIM15 clock enable */
+#define RCC_APB2ENR_TIM16EN ((uint32_t)0x00020000) /*!< TIM16 clock enable */
+#define RCC_APB2ENR_TIM17EN ((uint32_t)0x00040000) /*!< TIM17 clock enable */
+#define RCC_APB2ENR_DBGMCUEN ((uint32_t)0x00400000) /*!< DBGMCU clock enable */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_APB2ENR_SYSCFGEN RCC_APB2ENR_SYSCFGCOMPEN /*!< SYSCFG clock enable */
+#define RCC_APB2ENR_ADC1EN RCC_APB2ENR_ADCEN /*!< ADC1 clock enable */
+
+/***************** Bit definition for RCC_APB1ENR register *****************/
+#define RCC_APB1ENR_TIM2EN ((uint32_t)0x00000001) /*!< Timer 2 clock enable */
+#define RCC_APB1ENR_TIM3EN ((uint32_t)0x00000002) /*!< Timer 3 clock enable */
+#define RCC_APB1ENR_TIM6EN ((uint32_t)0x00000010) /*!< Timer 6 clock enable */
+#define RCC_APB1ENR_TIM14EN ((uint32_t)0x00000100) /*!< Timer 14 clock enable */
+#define RCC_APB1ENR_WWDGEN ((uint32_t)0x00000800) /*!< Window Watchdog clock enable */
+#define RCC_APB1ENR_SPI2EN ((uint32_t)0x00004000) /*!< SPI2 clock enable */
+#define RCC_APB1ENR_USART2EN ((uint32_t)0x00020000) /*!< USART2 clock enable */
+#define RCC_APB1ENR_I2C1EN ((uint32_t)0x00200000) /*!< I2C1 clock enable */
+#define RCC_APB1ENR_I2C2EN ((uint32_t)0x00400000) /*!< I2C2 clock enable */
+#define RCC_APB1ENR_PWREN ((uint32_t)0x10000000) /*!< PWR clock enable */
+#define RCC_APB1ENR_DACEN ((uint32_t)0x20000000) /*!< DAC clock enable */
+#define RCC_APB1ENR_CECEN ((uint32_t)0x40000000) /*!< CEC clock enable */
+
+/******************* Bit definition for RCC_BDCR register ******************/
+#define RCC_BDCR_LSEON ((uint32_t)0x00000001) /*!< External Low Speed oscillator enable */
+#define RCC_BDCR_LSERDY ((uint32_t)0x00000002) /*!< External Low Speed oscillator Ready */
+#define RCC_BDCR_LSEBYP ((uint32_t)0x00000004) /*!< External Low Speed oscillator Bypass */
+
+#define RCC_BDCR_LSEDRV ((uint32_t)0x00000018) /*!< LSEDRV[1:0] bits (LSE Osc. drive capability) */
+#define RCC_BDCR_LSEDRV_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define RCC_BDCR_LSEDRV_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+
+#define RCC_BDCR_RTCSEL ((uint32_t)0x00000300) /*!< RTCSEL[1:0] bits (RTC clock source selection) */
+#define RCC_BDCR_RTCSEL_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define RCC_BDCR_RTCSEL_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+
+/*!< RTC configuration */
+#define RCC_BDCR_RTCSEL_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
+#define RCC_BDCR_RTCSEL_LSE ((uint32_t)0x00000100) /*!< LSE oscillator clock used as RTC clock */
+#define RCC_BDCR_RTCSEL_LSI ((uint32_t)0x00000200) /*!< LSI oscillator clock used as RTC clock */
+#define RCC_BDCR_RTCSEL_HSE ((uint32_t)0x00000300) /*!< HSE oscillator clock divided by 128 used as RTC clock */
+
+#define RCC_BDCR_RTCEN ((uint32_t)0x00008000) /*!< RTC clock enable */
+#define RCC_BDCR_BDRST ((uint32_t)0x00010000) /*!< Backup domain software reset */
+
+/******************* Bit definition for RCC_CSR register *******************/
+#define RCC_CSR_LSION ((uint32_t)0x00000001) /*!< Internal Low Speed oscillator enable */
+#define RCC_CSR_LSIRDY ((uint32_t)0x00000002) /*!< Internal Low Speed oscillator Ready */
+#define RCC_CSR_V18PWRRSTF ((uint32_t)0x00800000) /*!< V1.8 power domain reset flag */
+#define RCC_CSR_RMVF ((uint32_t)0x01000000) /*!< Remove reset flag */
+#define RCC_CSR_OBLRSTF ((uint32_t)0x02000000) /*!< OBL reset flag */
+#define RCC_CSR_PINRSTF ((uint32_t)0x04000000) /*!< PIN reset flag */
+#define RCC_CSR_PORRSTF ((uint32_t)0x08000000) /*!< POR/PDR reset flag */
+#define RCC_CSR_SFTRSTF ((uint32_t)0x10000000) /*!< Software Reset flag */
+#define RCC_CSR_IWDGRSTF ((uint32_t)0x20000000) /*!< Independent Watchdog reset flag */
+#define RCC_CSR_WWDGRSTF ((uint32_t)0x40000000) /*!< Window watchdog reset flag */
+#define RCC_CSR_LPWRRSTF ((uint32_t)0x80000000) /*!< Low-Power reset flag */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_CSR_OBL RCC_CSR_OBLRSTF /*!< OBL reset flag */
+
+/******************* Bit definition for RCC_AHBRSTR register ***************/
+#define RCC_AHBRSTR_GPIOARST ((uint32_t)0x00020000) /*!< GPIOA clock reset */
+#define RCC_AHBRSTR_GPIOBRST ((uint32_t)0x00040000) /*!< GPIOB clock reset */
+#define RCC_AHBRSTR_GPIOCRST ((uint32_t)0x00080000) /*!< GPIOC clock reset */
+#define RCC_AHBRSTR_GPIODRST ((uint32_t)0x00100000) /*!< GPIOD clock reset */
+#define RCC_AHBRSTR_GPIOFRST ((uint32_t)0x00400000) /*!< GPIOF clock reset */
+#define RCC_AHBRSTR_TSCRST ((uint32_t)0x01000000) /*!< TS clock reset */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_AHBRSTR_TSRST RCC_AHBRSTR_TSCRST /*!< TS clock reset */
+
+/******************* Bit definition for RCC_CFGR2 register *****************/
+/*!< PREDIV configuration */
+#define RCC_CFGR2_PREDIV ((uint32_t)0x0000000F) /*!< PREDIV[3:0] bits */
+#define RCC_CFGR2_PREDIV_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR2_PREDIV_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define RCC_CFGR2_PREDIV_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define RCC_CFGR2_PREDIV_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+
+#define RCC_CFGR2_PREDIV_DIV1 ((uint32_t)0x00000000) /*!< PREDIV input clock not divided */
+#define RCC_CFGR2_PREDIV_DIV2 ((uint32_t)0x00000001) /*!< PREDIV input clock divided by 2 */
+#define RCC_CFGR2_PREDIV_DIV3 ((uint32_t)0x00000002) /*!< PREDIV input clock divided by 3 */
+#define RCC_CFGR2_PREDIV_DIV4 ((uint32_t)0x00000003) /*!< PREDIV input clock divided by 4 */
+#define RCC_CFGR2_PREDIV_DIV5 ((uint32_t)0x00000004) /*!< PREDIV input clock divided by 5 */
+#define RCC_CFGR2_PREDIV_DIV6 ((uint32_t)0x00000005) /*!< PREDIV input clock divided by 6 */
+#define RCC_CFGR2_PREDIV_DIV7 ((uint32_t)0x00000006) /*!< PREDIV input clock divided by 7 */
+#define RCC_CFGR2_PREDIV_DIV8 ((uint32_t)0x00000007) /*!< PREDIV input clock divided by 8 */
+#define RCC_CFGR2_PREDIV_DIV9 ((uint32_t)0x00000008) /*!< PREDIV input clock divided by 9 */
+#define RCC_CFGR2_PREDIV_DIV10 ((uint32_t)0x00000009) /*!< PREDIV input clock divided by 10 */
+#define RCC_CFGR2_PREDIV_DIV11 ((uint32_t)0x0000000A) /*!< PREDIV input clock divided by 11 */
+#define RCC_CFGR2_PREDIV_DIV12 ((uint32_t)0x0000000B) /*!< PREDIV input clock divided by 12 */
+#define RCC_CFGR2_PREDIV_DIV13 ((uint32_t)0x0000000C) /*!< PREDIV input clock divided by 13 */
+#define RCC_CFGR2_PREDIV_DIV14 ((uint32_t)0x0000000D) /*!< PREDIV input clock divided by 14 */
+#define RCC_CFGR2_PREDIV_DIV15 ((uint32_t)0x0000000E) /*!< PREDIV input clock divided by 15 */
+#define RCC_CFGR2_PREDIV_DIV16 ((uint32_t)0x0000000F) /*!< PREDIV input clock divided by 16 */
+
+/******************* Bit definition for RCC_CFGR3 register *****************/
+/*!< USART1 Clock source selection */
+#define RCC_CFGR3_USART1SW ((uint32_t)0x00000003) /*!< USART1SW[1:0] bits */
+#define RCC_CFGR3_USART1SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR3_USART1SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+#define RCC_CFGR3_USART1SW_PCLK ((uint32_t)0x00000000) /*!< PCLK clock used as USART1 clock source */
+#define RCC_CFGR3_USART1SW_SYSCLK ((uint32_t)0x00000001) /*!< System clock selected as USART1 clock source */
+#define RCC_CFGR3_USART1SW_LSE ((uint32_t)0x00000002) /*!< LSE oscillator clock used as USART1 clock source */
+#define RCC_CFGR3_USART1SW_HSI ((uint32_t)0x00000003) /*!< HSI oscillator clock used as USART1 clock source */
+
+/*!< I2C1 Clock source selection */
+#define RCC_CFGR3_I2C1SW ((uint32_t)0x00000010) /*!< I2C1SW bits */
+
+#define RCC_CFGR3_I2C1SW_HSI ((uint32_t)0x00000000) /*!< HSI oscillator clock used as I2C1 clock source */
+#define RCC_CFGR3_I2C1SW_SYSCLK ((uint32_t)0x00000010) /*!< System clock selected as I2C1 clock source */
+
+/*!< CEC Clock source selection */
+#define RCC_CFGR3_CECSW ((uint32_t)0x00000040) /*!< CECSW bits */
+
+#define RCC_CFGR3_CECSW_HSI_DIV244 ((uint32_t)0x00000000) /*!< HSI clock divided by 244 selected as HDMI CEC entry clock source */
+#define RCC_CFGR3_CECSW_LSE ((uint32_t)0x00000040) /*!< LSE clock selected as HDMI CEC entry clock source */
+
+/*!< USART2 Clock source selection */
+#define RCC_CFGR3_USART2SW ((uint32_t)0x00030000) /*!< USART2SW[1:0] bits */
+#define RCC_CFGR3_USART2SW_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define RCC_CFGR3_USART2SW_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+
+#define RCC_CFGR3_USART2SW_PCLK ((uint32_t)0x00000000) /*!< PCLK clock used as USART2 clock source */
+#define RCC_CFGR3_USART2SW_SYSCLK ((uint32_t)0x00010000) /*!< System clock selected as USART2 clock source */
+#define RCC_CFGR3_USART2SW_LSE ((uint32_t)0x00020000) /*!< LSE oscillator clock used as USART2 clock source */
+#define RCC_CFGR3_USART2SW_HSI ((uint32_t)0x00030000) /*!< HSI oscillator clock used as USART2 clock source */
+
+/******************* Bit definition for RCC_CR2 register *******************/
+#define RCC_CR2_HSI14ON ((uint32_t)0x00000001) /*!< Internal High Speed 14MHz clock enable */
+#define RCC_CR2_HSI14RDY ((uint32_t)0x00000002) /*!< Internal High Speed 14MHz clock ready flag */
+#define RCC_CR2_HSI14DIS ((uint32_t)0x00000004) /*!< Internal High Speed 14MHz clock disable */
+#define RCC_CR2_HSI14TRIM ((uint32_t)0x000000F8) /*!< Internal High Speed 14MHz clock trimming */
+#define RCC_CR2_HSI14CAL ((uint32_t)0x0000FF00) /*!< Internal High Speed 14MHz clock Calibration */
+
+/*****************************************************************************/
+/* */
+/* Real-Time Clock (RTC) */
+/* */
+/*****************************************************************************/
+/******************** Bits definition for RTC_TR register ******************/
+#define RTC_TR_PM ((uint32_t)0x00400000)
+#define RTC_TR_HT ((uint32_t)0x00300000)
+#define RTC_TR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TR_HU ((uint32_t)0x000F0000)
+#define RTC_TR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TR_MNT ((uint32_t)0x00007000)
+#define RTC_TR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TR_MNU ((uint32_t)0x00000F00)
+#define RTC_TR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TR_ST ((uint32_t)0x00000070)
+#define RTC_TR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TR_SU ((uint32_t)0x0000000F)
+#define RTC_TR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_DR register ******************/
+#define RTC_DR_YT ((uint32_t)0x00F00000)
+#define RTC_DR_YT_0 ((uint32_t)0x00100000)
+#define RTC_DR_YT_1 ((uint32_t)0x00200000)
+#define RTC_DR_YT_2 ((uint32_t)0x00400000)
+#define RTC_DR_YT_3 ((uint32_t)0x00800000)
+#define RTC_DR_YU ((uint32_t)0x000F0000)
+#define RTC_DR_YU_0 ((uint32_t)0x00010000)
+#define RTC_DR_YU_1 ((uint32_t)0x00020000)
+#define RTC_DR_YU_2 ((uint32_t)0x00040000)
+#define RTC_DR_YU_3 ((uint32_t)0x00080000)
+#define RTC_DR_WDU ((uint32_t)0x0000E000)
+#define RTC_DR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_DR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_DR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_DR_MT ((uint32_t)0x00001000)
+#define RTC_DR_MU ((uint32_t)0x00000F00)
+#define RTC_DR_MU_0 ((uint32_t)0x00000100)
+#define RTC_DR_MU_1 ((uint32_t)0x00000200)
+#define RTC_DR_MU_2 ((uint32_t)0x00000400)
+#define RTC_DR_MU_3 ((uint32_t)0x00000800)
+#define RTC_DR_DT ((uint32_t)0x00000030)
+#define RTC_DR_DT_0 ((uint32_t)0x00000010)
+#define RTC_DR_DT_1 ((uint32_t)0x00000020)
+#define RTC_DR_DU ((uint32_t)0x0000000F)
+#define RTC_DR_DU_0 ((uint32_t)0x00000001)
+#define RTC_DR_DU_1 ((uint32_t)0x00000002)
+#define RTC_DR_DU_2 ((uint32_t)0x00000004)
+#define RTC_DR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_CR register ******************/
+#define RTC_CR_COE ((uint32_t)0x00800000)
+#define RTC_CR_OSEL ((uint32_t)0x00600000)
+#define RTC_CR_OSEL_0 ((uint32_t)0x00200000)
+#define RTC_CR_OSEL_1 ((uint32_t)0x00400000)
+#define RTC_CR_POL ((uint32_t)0x00100000)
+#define RTC_CR_COSEL ((uint32_t)0x00080000)
+#define RTC_CR_BCK ((uint32_t)0x00040000)
+#define RTC_CR_SUB1H ((uint32_t)0x00020000)
+#define RTC_CR_ADD1H ((uint32_t)0x00010000)
+#define RTC_CR_TSIE ((uint32_t)0x00008000)
+#define RTC_CR_ALRAIE ((uint32_t)0x00001000)
+#define RTC_CR_TSE ((uint32_t)0x00000800)
+#define RTC_CR_ALRAE ((uint32_t)0x00000100)
+#define RTC_CR_FMT ((uint32_t)0x00000040)
+#define RTC_CR_BYPSHAD ((uint32_t)0x00000020)
+#define RTC_CR_REFCKON ((uint32_t)0x00000010)
+#define RTC_CR_TSEDGE ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_ISR register *****************/
+#define RTC_ISR_RECALPF ((uint32_t)0x00010000)
+#define RTC_ISR_TAMP2F ((uint32_t)0x00004000)
+#define RTC_ISR_TAMP1F ((uint32_t)0x00002000)
+#define RTC_ISR_TSOVF ((uint32_t)0x00001000)
+#define RTC_ISR_TSF ((uint32_t)0x00000800)
+#define RTC_ISR_ALRAF ((uint32_t)0x00000100)
+#define RTC_ISR_INIT ((uint32_t)0x00000080)
+#define RTC_ISR_INITF ((uint32_t)0x00000040)
+#define RTC_ISR_RSF ((uint32_t)0x00000020)
+#define RTC_ISR_INITS ((uint32_t)0x00000010)
+#define RTC_ISR_SHPF ((uint32_t)0x00000008)
+#define RTC_ISR_ALRAWF ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_PRER register ****************/
+#define RTC_PRER_PREDIV_A ((uint32_t)0x007F0000)
+#define RTC_PRER_PREDIV_S ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_ALRMAR register **************/
+#define RTC_ALRMAR_MSK4 ((uint32_t)0x80000000)
+#define RTC_ALRMAR_WDSEL ((uint32_t)0x40000000)
+#define RTC_ALRMAR_DT ((uint32_t)0x30000000)
+#define RTC_ALRMAR_DT_0 ((uint32_t)0x10000000)
+#define RTC_ALRMAR_DT_1 ((uint32_t)0x20000000)
+#define RTC_ALRMAR_DU ((uint32_t)0x0F000000)
+#define RTC_ALRMAR_DU_0 ((uint32_t)0x01000000)
+#define RTC_ALRMAR_DU_1 ((uint32_t)0x02000000)
+#define RTC_ALRMAR_DU_2 ((uint32_t)0x04000000)
+#define RTC_ALRMAR_DU_3 ((uint32_t)0x08000000)
+#define RTC_ALRMAR_MSK3 ((uint32_t)0x00800000)
+#define RTC_ALRMAR_PM ((uint32_t)0x00400000)
+#define RTC_ALRMAR_HT ((uint32_t)0x00300000)
+#define RTC_ALRMAR_HT_0 ((uint32_t)0x00100000)
+#define RTC_ALRMAR_HT_1 ((uint32_t)0x00200000)
+#define RTC_ALRMAR_HU ((uint32_t)0x000F0000)
+#define RTC_ALRMAR_HU_0 ((uint32_t)0x00010000)
+#define RTC_ALRMAR_HU_1 ((uint32_t)0x00020000)
+#define RTC_ALRMAR_HU_2 ((uint32_t)0x00040000)
+#define RTC_ALRMAR_HU_3 ((uint32_t)0x00080000)
+#define RTC_ALRMAR_MSK2 ((uint32_t)0x00008000)
+#define RTC_ALRMAR_MNT ((uint32_t)0x00007000)
+#define RTC_ALRMAR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_ALRMAR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_ALRMAR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_ALRMAR_MNU ((uint32_t)0x00000F00)
+#define RTC_ALRMAR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_ALRMAR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_ALRMAR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_ALRMAR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_ALRMAR_MSK1 ((uint32_t)0x00000080)
+#define RTC_ALRMAR_ST ((uint32_t)0x00000070)
+#define RTC_ALRMAR_ST_0 ((uint32_t)0x00000010)
+#define RTC_ALRMAR_ST_1 ((uint32_t)0x00000020)
+#define RTC_ALRMAR_ST_2 ((uint32_t)0x00000040)
+#define RTC_ALRMAR_SU ((uint32_t)0x0000000F)
+#define RTC_ALRMAR_SU_0 ((uint32_t)0x00000001)
+#define RTC_ALRMAR_SU_1 ((uint32_t)0x00000002)
+#define RTC_ALRMAR_SU_2 ((uint32_t)0x00000004)
+#define RTC_ALRMAR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_WPR register *****************/
+#define RTC_WPR_KEY ((uint32_t)0x000000FF)
+
+/******************** Bits definition for RTC_SSR register *****************/
+#define RTC_SSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_SHIFTR register **************/
+#define RTC_SHIFTR_SUBFS ((uint32_t)0x00007FFF)
+#define RTC_SHIFTR_ADD1S ((uint32_t)0x80000000)
+
+/******************** Bits definition for RTC_TSTR register ****************/
+#define RTC_TSTR_PM ((uint32_t)0x00400000)
+#define RTC_TSTR_HT ((uint32_t)0x00300000)
+#define RTC_TSTR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TSTR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TSTR_HU ((uint32_t)0x000F0000)
+#define RTC_TSTR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TSTR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TSTR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TSTR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TSTR_MNT ((uint32_t)0x00007000)
+#define RTC_TSTR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TSTR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TSTR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TSTR_MNU ((uint32_t)0x00000F00)
+#define RTC_TSTR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TSTR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TSTR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TSTR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TSTR_ST ((uint32_t)0x00000070)
+#define RTC_TSTR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TSTR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TSTR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TSTR_SU ((uint32_t)0x0000000F)
+#define RTC_TSTR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TSTR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TSTR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TSTR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSDR register ****************/
+#define RTC_TSDR_WDU ((uint32_t)0x0000E000)
+#define RTC_TSDR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_TSDR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_TSDR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_TSDR_MT ((uint32_t)0x00001000)
+#define RTC_TSDR_MU ((uint32_t)0x00000F00)
+#define RTC_TSDR_MU_0 ((uint32_t)0x00000100)
+#define RTC_TSDR_MU_1 ((uint32_t)0x00000200)
+#define RTC_TSDR_MU_2 ((uint32_t)0x00000400)
+#define RTC_TSDR_MU_3 ((uint32_t)0x00000800)
+#define RTC_TSDR_DT ((uint32_t)0x00000030)
+#define RTC_TSDR_DT_0 ((uint32_t)0x00000010)
+#define RTC_TSDR_DT_1 ((uint32_t)0x00000020)
+#define RTC_TSDR_DU ((uint32_t)0x0000000F)
+#define RTC_TSDR_DU_0 ((uint32_t)0x00000001)
+#define RTC_TSDR_DU_1 ((uint32_t)0x00000002)
+#define RTC_TSDR_DU_2 ((uint32_t)0x00000004)
+#define RTC_TSDR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSSSR register ***************/
+#define RTC_TSSSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_CALR register ****************/
+#define RTC_CALR_CALP ((uint32_t)0x00008000)
+#define RTC_CALR_CALW8 ((uint32_t)0x00004000)
+#define RTC_CALR_CALW16 ((uint32_t)0x00002000)
+#define RTC_CALR_CALM ((uint32_t)0x000001FF)
+#define RTC_CALR_CALM_0 ((uint32_t)0x00000001)
+#define RTC_CALR_CALM_1 ((uint32_t)0x00000002)
+#define RTC_CALR_CALM_2 ((uint32_t)0x00000004)
+#define RTC_CALR_CALM_3 ((uint32_t)0x00000008)
+#define RTC_CALR_CALM_4 ((uint32_t)0x00000010)
+#define RTC_CALR_CALM_5 ((uint32_t)0x00000020)
+#define RTC_CALR_CALM_6 ((uint32_t)0x00000040)
+#define RTC_CALR_CALM_7 ((uint32_t)0x00000080)
+#define RTC_CALR_CALM_8 ((uint32_t)0x00000100)
+
+/******************** Bits definition for RTC_TAFCR register ***************/
+#define RTC_TAFCR_ALARMOUTTYPE ((uint32_t)0x00040000)
+#define RTC_TAFCR_TAMPPUDIS ((uint32_t)0x00008000)
+#define RTC_TAFCR_TAMPPRCH ((uint32_t)0x00006000)
+#define RTC_TAFCR_TAMPPRCH_0 ((uint32_t)0x00002000)
+#define RTC_TAFCR_TAMPPRCH_1 ((uint32_t)0x00004000)
+#define RTC_TAFCR_TAMPFLT ((uint32_t)0x00001800)
+#define RTC_TAFCR_TAMPFLT_0 ((uint32_t)0x00000800)
+#define RTC_TAFCR_TAMPFLT_1 ((uint32_t)0x00001000)
+#define RTC_TAFCR_TAMPFREQ ((uint32_t)0x00000700)
+#define RTC_TAFCR_TAMPFREQ_0 ((uint32_t)0x00000100)
+#define RTC_TAFCR_TAMPFREQ_1 ((uint32_t)0x00000200)
+#define RTC_TAFCR_TAMPFREQ_2 ((uint32_t)0x00000400)
+#define RTC_TAFCR_TAMPTS ((uint32_t)0x00000080)
+#define RTC_TAFCR_TAMP2TRG ((uint32_t)0x00000010)
+#define RTC_TAFCR_TAMP2E ((uint32_t)0x00000008)
+#define RTC_TAFCR_TAMPIE ((uint32_t)0x00000004)
+#define RTC_TAFCR_TAMP1TRG ((uint32_t)0x00000002)
+#define RTC_TAFCR_TAMP1E ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_ALRMASSR register ************/
+#define RTC_ALRMASSR_MASKSS ((uint32_t)0x0F000000)
+#define RTC_ALRMASSR_MASKSS_0 ((uint32_t)0x01000000)
+#define RTC_ALRMASSR_MASKSS_1 ((uint32_t)0x02000000)
+#define RTC_ALRMASSR_MASKSS_2 ((uint32_t)0x04000000)
+#define RTC_ALRMASSR_MASKSS_3 ((uint32_t)0x08000000)
+#define RTC_ALRMASSR_SS ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_BKP0R register ***************/
+#define RTC_BKP0R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP1R register ***************/
+#define RTC_BKP1R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP2R register ***************/
+#define RTC_BKP2R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP3R register ***************/
+#define RTC_BKP3R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP4R register ***************/
+#define RTC_BKP4R ((uint32_t)0xFFFFFFFF)
+
+/******************** Number of backup registers ******************************/
+#define RTC_BKP_NUMBER ((uint32_t)0x00000005)
+
+/*****************************************************************************/
+/* */
+/* Serial Peripheral Interface (SPI) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for SPI_CR1 register *******************/
+#define SPI_CR1_CPHA ((uint32_t)0x00000001) /*!< Clock Phase */
+#define SPI_CR1_CPOL ((uint32_t)0x00000002) /*!< Clock Polarity */
+#define SPI_CR1_MSTR ((uint32_t)0x00000004) /*!< Master Selection */
+#define SPI_CR1_BR ((uint32_t)0x00000038) /*!< BR[2:0] bits (Baud Rate Control) */
+#define SPI_CR1_BR_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define SPI_CR1_BR_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define SPI_CR1_BR_2 ((uint32_t)0x00000020) /*!< Bit 2 */
+#define SPI_CR1_SPE ((uint32_t)0x00000040) /*!< SPI Enable */
+#define SPI_CR1_LSBFIRST ((uint32_t)0x00000080) /*!< Frame Format */
+#define SPI_CR1_SSI ((uint32_t)0x00000100) /*!< Internal slave select */
+#define SPI_CR1_SSM ((uint32_t)0x00000200) /*!< Software slave management */
+#define SPI_CR1_RXONLY ((uint32_t)0x00000400) /*!< Receive only */
+#define SPI_CR1_CRCL ((uint32_t)0x00000800) /*!< CRC Length */
+#define SPI_CR1_CRCNEXT ((uint32_t)0x00001000) /*!< Transmit CRC next */
+#define SPI_CR1_CRCEN ((uint32_t)0x00002000) /*!< Hardware CRC calculation enable */
+#define SPI_CR1_BIDIOE ((uint32_t)0x00004000) /*!< Output enable in bidirectional mode */
+#define SPI_CR1_BIDIMODE ((uint32_t)0x00008000) /*!< Bidirectional data mode enable */
+
+/******************* Bit definition for SPI_CR2 register *******************/
+#define SPI_CR2_RXDMAEN ((uint32_t)0x00000001) /*!< Rx Buffer DMA Enable */
+#define SPI_CR2_TXDMAEN ((uint32_t)0x00000002) /*!< Tx Buffer DMA Enable */
+#define SPI_CR2_SSOE ((uint32_t)0x00000004) /*!< SS Output Enable */
+#define SPI_CR2_NSSP ((uint32_t)0x00000008) /*!< NSS pulse management Enable */
+#define SPI_CR2_FRF ((uint32_t)0x00000010) /*!< Frame Format Enable */
+#define SPI_CR2_ERRIE ((uint32_t)0x00000020) /*!< Error Interrupt Enable */
+#define SPI_CR2_RXNEIE ((uint32_t)0x00000040) /*!< RX buffer Not Empty Interrupt Enable */
+#define SPI_CR2_TXEIE ((uint32_t)0x00000080) /*!< Tx buffer Empty Interrupt Enable */
+#define SPI_CR2_DS ((uint32_t)0x00000F00) /*!< DS[3:0] Data Size */
+#define SPI_CR2_DS_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define SPI_CR2_DS_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define SPI_CR2_DS_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define SPI_CR2_DS_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+#define SPI_CR2_FRXTH ((uint32_t)0x00001000) /*!< FIFO reception Threshold */
+#define SPI_CR2_LDMARX ((uint32_t)0x00002000) /*!< Last DMA transfer for reception */
+#define SPI_CR2_LDMATX ((uint32_t)0x00004000) /*!< Last DMA transfer for transmission */
+
+/******************** Bit definition for SPI_SR register *******************/
+#define SPI_SR_RXNE ((uint32_t)0x00000001) /*!< Receive buffer Not Empty */
+#define SPI_SR_TXE ((uint32_t)0x00000002) /*!< Transmit buffer Empty */
+#define SPI_SR_CHSIDE ((uint32_t)0x00000004) /*!< Channel side */
+#define SPI_SR_UDR ((uint32_t)0x00000008) /*!< Underrun flag */
+#define SPI_SR_CRCERR ((uint32_t)0x00000010) /*!< CRC Error flag */
+#define SPI_SR_MODF ((uint32_t)0x00000020) /*!< Mode fault */
+#define SPI_SR_OVR ((uint32_t)0x00000040) /*!< Overrun flag */
+#define SPI_SR_BSY ((uint32_t)0x00000080) /*!< Busy flag */
+#define SPI_SR_FRE ((uint32_t)0x00000100) /*!< TI frame format error */
+#define SPI_SR_FRLVL ((uint32_t)0x00000600) /*!< FIFO Reception Level */
+#define SPI_SR_FRLVL_0 ((uint32_t)0x00000200) /*!< Bit 0 */
+#define SPI_SR_FRLVL_1 ((uint32_t)0x00000400) /*!< Bit 1 */
+#define SPI_SR_FTLVL ((uint32_t)0x00001800) /*!< FIFO Transmission Level */
+#define SPI_SR_FTLVL_0 ((uint32_t)0x00000800) /*!< Bit 0 */
+#define SPI_SR_FTLVL_1 ((uint32_t)0x00001000) /*!< Bit 1 */
+
+/******************** Bit definition for SPI_DR register *******************/
+#define SPI_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data Register */
+
+/******************* Bit definition for SPI_CRCPR register *****************/
+#define SPI_CRCPR_CRCPOLY ((uint32_t)0xFFFFFFFF) /*!< CRC polynomial register */
+
+/****************** Bit definition for SPI_RXCRCR register *****************/
+#define SPI_RXCRCR_RXCRC ((uint32_t)0xFFFFFFFF) /*!< Rx CRC Register */
+
+/****************** Bit definition for SPI_TXCRCR register *****************/
+#define SPI_TXCRCR_TXCRC ((uint32_t)0xFFFFFFFF) /*!< Tx CRC Register */
+
+/****************** Bit definition for SPI_I2SCFGR register ****************/
+#define SPI_I2SCFGR_CHLEN ((uint32_t)0x00000001) /*!<Channel length (number of bits per audio channel) */
+#define SPI_I2SCFGR_DATLEN ((uint32_t)0x00000006) /*!<DATLEN[1:0] bits (Data length to be transferred) */
+#define SPI_I2SCFGR_DATLEN_0 ((uint32_t)0x00000002) /*!<Bit 0 */
+#define SPI_I2SCFGR_DATLEN_1 ((uint32_t)0x00000004) /*!<Bit 1 */
+#define SPI_I2SCFGR_CKPOL ((uint32_t)0x00000008) /*!<steady state clock polarity */
+#define SPI_I2SCFGR_I2SSTD ((uint32_t)0x00000030) /*!<I2SSTD[1:0] bits (I2S standard selection) */
+#define SPI_I2SCFGR_I2SSTD_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SSTD_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define SPI_I2SCFGR_PCMSYNC ((uint32_t)0x00000080) /*!<PCM frame synchronization */
+#define SPI_I2SCFGR_I2SCFG ((uint32_t)0x00000300) /*!<I2SCFG[1:0] bits (I2S configuration mode) */
+#define SPI_I2SCFGR_I2SCFG_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SCFG_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define SPI_I2SCFGR_I2SE ((uint32_t)0x00000400) /*!<I2S Enable */
+#define SPI_I2SCFGR_I2SMOD ((uint32_t)0x00000800) /*!<I2S mode selection */
+
+/****************** Bit definition for SPI_I2SPR register ******************/
+#define SPI_I2SPR_I2SDIV ((uint32_t)0x000000FF) /*!<I2S Linear prescaler */
+#define SPI_I2SPR_ODD ((uint32_t)0x00000100) /*!<Odd factor for the prescaler */
+#define SPI_I2SPR_MCKOE ((uint32_t)0x00000200) /*!<Master Clock Output Enable */
+
+/*****************************************************************************/
+/* */
+/* System Configuration (SYSCFG) */
+/* */
+/*****************************************************************************/
+/***************** Bit definition for SYSCFG_CFGR1 register ****************/
+#define SYSCFG_CFGR1_MEM_MODE ((uint32_t)0x00000003) /*!< SYSCFG_Memory Remap Config */
+#define SYSCFG_CFGR1_MEM_MODE_0 ((uint32_t)0x00000001) /*!< SYSCFG_Memory Remap Config Bit 0 */
+#define SYSCFG_CFGR1_MEM_MODE_1 ((uint32_t)0x00000002) /*!< SYSCFG_Memory Remap Config Bit 1 */
+
+#define SYSCFG_CFGR1_DMA_RMP ((uint32_t)0x00001F00) /*!< DMA remap mask */
+#define SYSCFG_CFGR1_ADC_DMA_RMP ((uint32_t)0x00000100) /*!< ADC DMA remap */
+#define SYSCFG_CFGR1_USART1TX_DMA_RMP ((uint32_t)0x00000200) /*!< USART1 TX DMA remap */
+#define SYSCFG_CFGR1_USART1RX_DMA_RMP ((uint32_t)0x00000400) /*!< USART1 RX DMA remap */
+#define SYSCFG_CFGR1_TIM16_DMA_RMP ((uint32_t)0x00000800) /*!< Timer 16 DMA remap */
+#define SYSCFG_CFGR1_TIM17_DMA_RMP ((uint32_t)0x00001000) /*!< Timer 17 DMA remap */
+
+#define SYSCFG_CFGR1_I2C_FMP_PB6 ((uint32_t)0x00010000) /*!< I2C PB6 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB7 ((uint32_t)0x00020000) /*!< I2C PB7 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB8 ((uint32_t)0x00040000) /*!< I2C PB8 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB9 ((uint32_t)0x00080000) /*!< I2C PB9 Fast mode plus */
+
+/***************** Bit definition for SYSCFG_EXTICR1 register **************/
+#define SYSCFG_EXTICR1_EXTI0 ((uint16_t)0x000F) /*!< EXTI 0 configuration */
+#define SYSCFG_EXTICR1_EXTI1 ((uint16_t)0x00F0) /*!< EXTI 1 configuration */
+#define SYSCFG_EXTICR1_EXTI2 ((uint16_t)0x0F00) /*!< EXTI 2 configuration */
+#define SYSCFG_EXTICR1_EXTI3 ((uint16_t)0xF000) /*!< EXTI 3 configuration */
+
+/**
+ * @brief EXTI0 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI0_PA ((uint16_t)0x0000) /*!< PA[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PB ((uint16_t)0x0001) /*!< PB[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PC ((uint16_t)0x0002) /*!< PC[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PD ((uint16_t)0x0003) /*!< PD[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PF ((uint16_t)0x0005) /*!< PF[0] pin */
+
+/**
+ * @brief EXTI1 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI1_PA ((uint16_t)0x0000) /*!< PA[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PB ((uint16_t)0x0010) /*!< PB[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PC ((uint16_t)0x0020) /*!< PC[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PD ((uint16_t)0x0030) /*!< PD[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PF ((uint16_t)0x0050) /*!< PF[1] pin */
+
+/**
+ * @brief EXTI2 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI2_PA ((uint16_t)0x0000) /*!< PA[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PB ((uint16_t)0x0100) /*!< PB[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PC ((uint16_t)0x0200) /*!< PC[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PD ((uint16_t)0x0300) /*!< PD[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PF ((uint16_t)0x0500) /*!< PF[2] pin */
+
+/**
+ * @brief EXTI3 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI3_PA ((uint16_t)0x0000) /*!< PA[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PB ((uint16_t)0x1000) /*!< PB[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PC ((uint16_t)0x2000) /*!< PC[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PD ((uint16_t)0x3000) /*!< PD[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PF ((uint16_t)0x5000) /*!< PF[3] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR2 register **************/
+#define SYSCFG_EXTICR2_EXTI4 ((uint16_t)0x000F) /*!< EXTI 4 configuration */
+#define SYSCFG_EXTICR2_EXTI5 ((uint16_t)0x00F0) /*!< EXTI 5 configuration */
+#define SYSCFG_EXTICR2_EXTI6 ((uint16_t)0x0F00) /*!< EXTI 6 configuration */
+#define SYSCFG_EXTICR2_EXTI7 ((uint16_t)0xF000) /*!< EXTI 7 configuration */
+
+/**
+ * @brief EXTI4 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI4_PA ((uint16_t)0x0000) /*!< PA[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PB ((uint16_t)0x0001) /*!< PB[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PC ((uint16_t)0x0002) /*!< PC[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PD ((uint16_t)0x0003) /*!< PD[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PF ((uint16_t)0x0005) /*!< PF[4] pin */
+
+/**
+ * @brief EXTI5 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI5_PA ((uint16_t)0x0000) /*!< PA[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PB ((uint16_t)0x0010) /*!< PB[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PC ((uint16_t)0x0020) /*!< PC[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PD ((uint16_t)0x0030) /*!< PD[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PF ((uint16_t)0x0050) /*!< PF[5] pin */
+
+/**
+ * @brief EXTI6 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI6_PA ((uint16_t)0x0000) /*!< PA[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PB ((uint16_t)0x0100) /*!< PB[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PC ((uint16_t)0x0200) /*!< PC[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PD ((uint16_t)0x0300) /*!< PD[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PF ((uint16_t)0x0500) /*!< PF[6] pin */
+
+/**
+ * @brief EXTI7 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI7_PA ((uint16_t)0x0000) /*!< PA[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PB ((uint16_t)0x1000) /*!< PB[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PC ((uint16_t)0x2000) /*!< PC[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PD ((uint16_t)0x3000) /*!< PD[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PF ((uint16_t)0x5000) /*!< PF[7] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR3 register **************/
+#define SYSCFG_EXTICR3_EXTI8 ((uint16_t)0x000F) /*!< EXTI 8 configuration */
+#define SYSCFG_EXTICR3_EXTI9 ((uint16_t)0x00F0) /*!< EXTI 9 configuration */
+#define SYSCFG_EXTICR3_EXTI10 ((uint16_t)0x0F00) /*!< EXTI 10 configuration */
+#define SYSCFG_EXTICR3_EXTI11 ((uint16_t)0xF000) /*!< EXTI 11 configuration */
+
+/**
+ * @brief EXTI8 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI8_PA ((uint16_t)0x0000) /*!< PA[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PB ((uint16_t)0x0001) /*!< PB[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PC ((uint16_t)0x0002) /*!< PC[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PD ((uint16_t)0x0003) /*!< PD[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PF ((uint16_t)0x0005) /*!< PF[8] pin */
+
+/**
+ * @brief EXTI9 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI9_PA ((uint16_t)0x0000) /*!< PA[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PB ((uint16_t)0x0010) /*!< PB[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PC ((uint16_t)0x0020) /*!< PC[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PD ((uint16_t)0x0030) /*!< PD[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PF ((uint16_t)0x0050) /*!< PF[9] pin */
+
+/**
+ * @brief EXTI10 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI10_PA ((uint16_t)0x0000) /*!< PA[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PB ((uint16_t)0x0100) /*!< PB[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PC ((uint16_t)0x0200) /*!< PC[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PD ((uint16_t)0x0300) /*!< PD[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PF ((uint16_t)0x0500) /*!< PF[10] pin */
+
+/**
+ * @brief EXTI11 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI11_PA ((uint16_t)0x0000) /*!< PA[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PB ((uint16_t)0x1000) /*!< PB[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PC ((uint16_t)0x2000) /*!< PC[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PD ((uint16_t)0x3000) /*!< PD[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PF ((uint16_t)0x5000) /*!< PF[11] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR4 register **************/
+#define SYSCFG_EXTICR4_EXTI12 ((uint16_t)0x000F) /*!< EXTI 12 configuration */
+#define SYSCFG_EXTICR4_EXTI13 ((uint16_t)0x00F0) /*!< EXTI 13 configuration */
+#define SYSCFG_EXTICR4_EXTI14 ((uint16_t)0x0F00) /*!< EXTI 14 configuration */
+#define SYSCFG_EXTICR4_EXTI15 ((uint16_t)0xF000) /*!< EXTI 15 configuration */
+
+/**
+ * @brief EXTI12 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI12_PA ((uint16_t)0x0000) /*!< PA[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PB ((uint16_t)0x0001) /*!< PB[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PC ((uint16_t)0x0002) /*!< PC[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PD ((uint16_t)0x0003) /*!< PD[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PF ((uint16_t)0x0005) /*!< PF[12] pin */
+
+/**
+ * @brief EXTI13 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI13_PA ((uint16_t)0x0000) /*!< PA[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PB ((uint16_t)0x0010) /*!< PB[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PC ((uint16_t)0x0020) /*!< PC[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PD ((uint16_t)0x0030) /*!< PD[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PF ((uint16_t)0x0050) /*!< PF[13] pin */
+
+/**
+ * @brief EXTI14 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI14_PA ((uint16_t)0x0000) /*!< PA[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PB ((uint16_t)0x0100) /*!< PB[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PC ((uint16_t)0x0200) /*!< PC[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PD ((uint16_t)0x0300) /*!< PD[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PF ((uint16_t)0x0500) /*!< PF[14] pin */
+
+/**
+ * @brief EXTI15 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI15_PA ((uint16_t)0x0000) /*!< PA[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PB ((uint16_t)0x1000) /*!< PB[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PC ((uint16_t)0x2000) /*!< PC[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PD ((uint16_t)0x3000) /*!< PD[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PF ((uint16_t)0x5000) /*!< PF[15] pin */
+
+/***************** Bit definition for SYSCFG_CFGR2 register ****************/
+#define SYSCFG_CFGR2_LOCKUP_LOCK ((uint32_t)0x00000001) /*!< Enables and locks the LOCKUP (Hardfault) output of CortexM0 with Break Input of TIMER1 */
+#define SYSCFG_CFGR2_SRAM_PARITY_LOCK ((uint32_t)0x00000002) /*!< Enables and locks the SRAM_PARITY error signal with Break Input of TIMER1 */
+#define SYSCFG_CFGR2_PVD_LOCK ((uint32_t)0x00000004) /*!< Enables and locks the PVD connection with Timer1 Break Input and also the PVD_EN and PVDSEL[2:0] bits of the Power Control Interface */
+#define SYSCFG_CFGR2_SRAM_PEF ((uint32_t)0x00000100) /*!< SRAM Parity error flag */
+#define SYSCFG_CFGR2_SRAM_PE SYSCFG_CFGR2_SRAM_PEF /*!< SRAM Parity error flag (define maintained for legacy purpose) */
+
+/*****************************************************************************/
+/* */
+/* Timers (TIM) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for TIM_CR1 register *******************/
+#define TIM_CR1_CEN ((uint32_t)0x00000001) /*!<Counter enable */
+#define TIM_CR1_UDIS ((uint32_t)0x00000002) /*!<Update disable */
+#define TIM_CR1_URS ((uint32_t)0x00000004) /*!<Update request source */
+#define TIM_CR1_OPM ((uint32_t)0x00000008) /*!<One pulse mode */
+#define TIM_CR1_DIR ((uint32_t)0x00000010) /*!<Direction */
+
+#define TIM_CR1_CMS ((uint32_t)0x00000060) /*!<CMS[1:0] bits (Center-aligned mode selection) */
+#define TIM_CR1_CMS_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define TIM_CR1_CMS_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+
+#define TIM_CR1_ARPE ((uint32_t)0x00000080) /*!<Auto-reload preload enable */
+
+#define TIM_CR1_CKD ((uint32_t)0x00000300) /*!<CKD[1:0] bits (clock division) */
+#define TIM_CR1_CKD_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CR1_CKD_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+/******************* Bit definition for TIM_CR2 register *******************/
+#define TIM_CR2_CCPC ((uint32_t)0x00000001) /*!<Capture/Compare Preloaded Control */
+#define TIM_CR2_CCUS ((uint32_t)0x00000004) /*!<Capture/Compare Control Update Selection */
+#define TIM_CR2_CCDS ((uint32_t)0x00000008) /*!<Capture/Compare DMA Selection */
+
+#define TIM_CR2_MMS ((uint32_t)0x00000070) /*!<MMS[2:0] bits (Master Mode Selection) */
+#define TIM_CR2_MMS_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CR2_MMS_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CR2_MMS_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CR2_TI1S ((uint32_t)0x00000080) /*!<TI1 Selection */
+#define TIM_CR2_OIS1 ((uint32_t)0x00000100) /*!<Output Idle state 1 (OC1 output) */
+#define TIM_CR2_OIS1N ((uint32_t)0x00000200) /*!<Output Idle state 1 (OC1N output) */
+#define TIM_CR2_OIS2 ((uint32_t)0x00000400) /*!<Output Idle state 2 (OC2 output) */
+#define TIM_CR2_OIS2N ((uint32_t)0x00000800) /*!<Output Idle state 2 (OC2N output) */
+#define TIM_CR2_OIS3 ((uint32_t)0x00001000) /*!<Output Idle state 3 (OC3 output) */
+#define TIM_CR2_OIS3N ((uint32_t)0x00002000) /*!<Output Idle state 3 (OC3N output) */
+#define TIM_CR2_OIS4 ((uint32_t)0x00004000) /*!<Output Idle state 4 (OC4 output) */
+
+/******************* Bit definition for TIM_SMCR register ******************/
+#define TIM_SMCR_SMS ((uint32_t)0x00000007) /*!<SMS[2:0] bits (Slave mode selection) */
+#define TIM_SMCR_SMS_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_SMCR_SMS_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_SMCR_SMS_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+
+#define TIM_SMCR_OCCS ((uint32_t)0x00000008) /*!< OCREF clear selection */
+
+#define TIM_SMCR_TS ((uint32_t)0x00000070) /*!<TS[2:0] bits (Trigger selection) */
+#define TIM_SMCR_TS_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_SMCR_TS_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_SMCR_TS_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_SMCR_MSM ((uint32_t)0x00000080) /*!<Master/slave mode */
+
+#define TIM_SMCR_ETF ((uint32_t)0x00000F00) /*!<ETF[3:0] bits (External trigger filter) */
+#define TIM_SMCR_ETF_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_SMCR_ETF_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define TIM_SMCR_ETF_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define TIM_SMCR_ETF_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+
+#define TIM_SMCR_ETPS ((uint32_t)0x00003000) /*!<ETPS[1:0] bits (External trigger prescaler) */
+#define TIM_SMCR_ETPS_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_SMCR_ETPS_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+
+#define TIM_SMCR_ECE ((uint32_t)0x00004000) /*!<External clock enable */
+#define TIM_SMCR_ETP ((uint32_t)0x00008000) /*!<External trigger polarity */
+
+/******************* Bit definition for TIM_DIER register ******************/
+#define TIM_DIER_UIE ((uint32_t)0x00000001) /*!<Update interrupt enable */
+#define TIM_DIER_CC1IE ((uint32_t)0x00000002) /*!<Capture/Compare 1 interrupt enable */
+#define TIM_DIER_CC2IE ((uint32_t)0x00000004) /*!<Capture/Compare 2 interrupt enable */
+#define TIM_DIER_CC3IE ((uint32_t)0x00000008) /*!<Capture/Compare 3 interrupt enable */
+#define TIM_DIER_CC4IE ((uint32_t)0x00000010) /*!<Capture/Compare 4 interrupt enable */
+#define TIM_DIER_COMIE ((uint32_t)0x00000020) /*!<COM interrupt enable */
+#define TIM_DIER_TIE ((uint32_t)0x00000040) /*!<Trigger interrupt enable */
+#define TIM_DIER_BIE ((uint32_t)0x00000080) /*!<Break interrupt enable */
+#define TIM_DIER_UDE ((uint32_t)0x00000100) /*!<Update DMA request enable */
+#define TIM_DIER_CC1DE ((uint32_t)0x00000200) /*!<Capture/Compare 1 DMA request enable */
+#define TIM_DIER_CC2DE ((uint32_t)0x00000400) /*!<Capture/Compare 2 DMA request enable */
+#define TIM_DIER_CC3DE ((uint32_t)0x00000800) /*!<Capture/Compare 3 DMA request enable */
+#define TIM_DIER_CC4DE ((uint32_t)0x00001000) /*!<Capture/Compare 4 DMA request enable */
+#define TIM_DIER_COMDE ((uint32_t)0x00002000) /*!<COM DMA request enable */
+#define TIM_DIER_TDE ((uint32_t)0x00004000) /*!<Trigger DMA request enable */
+
+/******************** Bit definition for TIM_SR register *******************/
+#define TIM_SR_UIF ((uint32_t)0x00000001) /*!<Update interrupt Flag */
+#define TIM_SR_CC1IF ((uint32_t)0x00000002) /*!<Capture/Compare 1 interrupt Flag */
+#define TIM_SR_CC2IF ((uint32_t)0x00000004) /*!<Capture/Compare 2 interrupt Flag */
+#define TIM_SR_CC3IF ((uint32_t)0x00000008) /*!<Capture/Compare 3 interrupt Flag */
+#define TIM_SR_CC4IF ((uint32_t)0x00000010) /*!<Capture/Compare 4 interrupt Flag */
+#define TIM_SR_COMIF ((uint32_t)0x00000020) /*!<COM interrupt Flag */
+#define TIM_SR_TIF ((uint32_t)0x00000040) /*!<Trigger interrupt Flag */
+#define TIM_SR_BIF ((uint32_t)0x00000080) /*!<Break interrupt Flag */
+#define TIM_SR_CC1OF ((uint32_t)0x00000200) /*!<Capture/Compare 1 Overcapture Flag */
+#define TIM_SR_CC2OF ((uint32_t)0x00000400) /*!<Capture/Compare 2 Overcapture Flag */
+#define TIM_SR_CC3OF ((uint32_t)0x00000800) /*!<Capture/Compare 3 Overcapture Flag */
+#define TIM_SR_CC4OF ((uint32_t)0x00001000) /*!<Capture/Compare 4 Overcapture Flag */
+
+/******************* Bit definition for TIM_EGR register *******************/
+#define TIM_EGR_UG ((uint32_t)0x00000001) /*!<Update Generation */
+#define TIM_EGR_CC1G ((uint32_t)0x00000002) /*!<Capture/Compare 1 Generation */
+#define TIM_EGR_CC2G ((uint32_t)0x00000004) /*!<Capture/Compare 2 Generation */
+#define TIM_EGR_CC3G ((uint32_t)0x00000008) /*!<Capture/Compare 3 Generation */
+#define TIM_EGR_CC4G ((uint32_t)0x00000010) /*!<Capture/Compare 4 Generation */
+#define TIM_EGR_COMG ((uint32_t)0x00000020) /*!<Capture/Compare Control Update Generation */
+#define TIM_EGR_TG ((uint32_t)0x00000040) /*!<Trigger Generation */
+#define TIM_EGR_BG ((uint32_t)0x00000080) /*!<Break Generation */
+
+/****************** Bit definition for TIM_CCMR1 register ******************/
+#define TIM_CCMR1_CC1S ((uint32_t)0x00000003) /*!<CC1S[1:0] bits (Capture/Compare 1 Selection) */
+#define TIM_CCMR1_CC1S_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_CCMR1_CC1S_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC1FE ((uint32_t)0x00000004) /*!<Output Compare 1 Fast enable */
+#define TIM_CCMR1_OC1PE ((uint32_t)0x00000008) /*!<Output Compare 1 Preload enable */
+
+#define TIM_CCMR1_OC1M ((uint32_t)0x00000070) /*!<OC1M[2:0] bits (Output Compare 1 Mode) */
+#define TIM_CCMR1_OC1M_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR1_OC1M_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR1_OC1M_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CCMR1_OC1CE ((uint32_t)0x00000080) /*!<Output Compare 1Clear Enable */
+
+#define TIM_CCMR1_CC2S ((uint32_t)0x00000300) /*!<CC2S[1:0] bits (Capture/Compare 2 Selection) */
+#define TIM_CCMR1_CC2S_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CCMR1_CC2S_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC2FE ((uint32_t)0x00000400) /*!<Output Compare 2 Fast enable */
+#define TIM_CCMR1_OC2PE ((uint32_t)0x00000800) /*!<Output Compare 2 Preload enable */
+
+#define TIM_CCMR1_OC2M ((uint32_t)0x00007000) /*!<OC2M[2:0] bits (Output Compare 2 Mode) */
+#define TIM_CCMR1_OC2M_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR1_OC2M_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR1_OC2M_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+
+#define TIM_CCMR1_OC2CE ((uint32_t)0x00008000) /*!<Output Compare 2 Clear Enable */
+
+/*---------------------------------------------------------------------------*/
+
+#define TIM_CCMR1_IC1PSC ((uint32_t)0x0000000C) /*!<IC1PSC[1:0] bits (Input Capture 1 Prescaler) */
+#define TIM_CCMR1_IC1PSC_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define TIM_CCMR1_IC1PSC_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC1F ((uint32_t)0x000000F0) /*!<IC1F[3:0] bits (Input Capture 1 Filter) */
+#define TIM_CCMR1_IC1F_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR1_IC1F_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR1_IC1F_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define TIM_CCMR1_IC1F_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define TIM_CCMR1_IC2PSC ((uint32_t)0x00000C00) /*!<IC2PSC[1:0] bits (Input Capture 2 Prescaler) */
+#define TIM_CCMR1_IC2PSC_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define TIM_CCMR1_IC2PSC_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC2F ((uint32_t)0x0000F000) /*!<IC2F[3:0] bits (Input Capture 2 Filter) */
+#define TIM_CCMR1_IC2F_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR1_IC2F_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR1_IC2F_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define TIM_CCMR1_IC2F_3 ((uint32_t)0x00008000) /*!<Bit 3 */
+
+/****************** Bit definition for TIM_CCMR2 register ******************/
+#define TIM_CCMR2_CC3S ((uint32_t)0x00000003) /*!<CC3S[1:0] bits (Capture/Compare 3 Selection) */
+#define TIM_CCMR2_CC3S_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_CCMR2_CC3S_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC3FE ((uint32_t)0x00000004) /*!<Output Compare 3 Fast enable */
+#define TIM_CCMR2_OC3PE ((uint32_t)0x00000008) /*!<Output Compare 3 Preload enable */
+
+#define TIM_CCMR2_OC3M ((uint32_t)0x00000070) /*!<OC3M[2:0] bits (Output Compare 3 Mode) */
+#define TIM_CCMR2_OC3M_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR2_OC3M_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR2_OC3M_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CCMR2_OC3CE ((uint32_t)0x00000080) /*!<Output Compare 3 Clear Enable */
+
+#define TIM_CCMR2_CC4S ((uint32_t)0x00000300) /*!<CC4S[1:0] bits (Capture/Compare 4 Selection) */
+#define TIM_CCMR2_CC4S_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CCMR2_CC4S_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC4FE ((uint32_t)0x00000400) /*!<Output Compare 4 Fast enable */
+#define TIM_CCMR2_OC4PE ((uint32_t)0x00000800) /*!<Output Compare 4 Preload enable */
+
+#define TIM_CCMR2_OC4M ((uint32_t)0x00007000) /*!<OC4M[2:0] bits (Output Compare 4 Mode) */
+#define TIM_CCMR2_OC4M_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR2_OC4M_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR2_OC4M_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+
+#define TIM_CCMR2_OC4CE ((uint32_t)0x00008000) /*!<Output Compare 4 Clear Enable */
+
+/*---------------------------------------------------------------------------*/
+
+#define TIM_CCMR2_IC3PSC ((uint32_t)0x0000000C) /*!<IC3PSC[1:0] bits (Input Capture 3 Prescaler) */
+#define TIM_CCMR2_IC3PSC_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define TIM_CCMR2_IC3PSC_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC3F ((uint32_t)0x000000F0) /*!<IC3F[3:0] bits (Input Capture 3 Filter) */
+#define TIM_CCMR2_IC3F_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR2_IC3F_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR2_IC3F_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define TIM_CCMR2_IC3F_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define TIM_CCMR2_IC4PSC ((uint32_t)0x00000C00) /*!<IC4PSC[1:0] bits (Input Capture 4 Prescaler) */
+#define TIM_CCMR2_IC4PSC_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define TIM_CCMR2_IC4PSC_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC4F ((uint32_t)0x0000F000) /*!<IC4F[3:0] bits (Input Capture 4 Filter) */
+#define TIM_CCMR2_IC4F_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR2_IC4F_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR2_IC4F_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define TIM_CCMR2_IC4F_3 ((uint32_t)0x00008000) /*!<Bit 3 */
+
+/******************* Bit definition for TIM_CCER register ******************/
+#define TIM_CCER_CC1E ((uint32_t)0x00000001) /*!<Capture/Compare 1 output enable */
+#define TIM_CCER_CC1P ((uint32_t)0x00000002) /*!<Capture/Compare 1 output Polarity */
+#define TIM_CCER_CC1NE ((uint32_t)0x00000004) /*!<Capture/Compare 1 Complementary output enable */
+#define TIM_CCER_CC1NP ((uint32_t)0x00000008) /*!<Capture/Compare 1 Complementary output Polarity */
+#define TIM_CCER_CC2E ((uint32_t)0x00000010) /*!<Capture/Compare 2 output enable */
+#define TIM_CCER_CC2P ((uint32_t)0x00000020) /*!<Capture/Compare 2 output Polarity */
+#define TIM_CCER_CC2NE ((uint32_t)0x00000040) /*!<Capture/Compare 2 Complementary output enable */
+#define TIM_CCER_CC2NP ((uint32_t)0x00000080) /*!<Capture/Compare 2 Complementary output Polarity */
+#define TIM_CCER_CC3E ((uint32_t)0x00000100) /*!<Capture/Compare 3 output enable */
+#define TIM_CCER_CC3P ((uint32_t)0x00000200) /*!<Capture/Compare 3 output Polarity */
+#define TIM_CCER_CC3NE ((uint32_t)0x00000400) /*!<Capture/Compare 3 Complementary output enable */
+#define TIM_CCER_CC3NP ((uint32_t)0x00000800) /*!<Capture/Compare 3 Complementary output Polarity */
+#define TIM_CCER_CC4E ((uint32_t)0x00001000) /*!<Capture/Compare 4 output enable */
+#define TIM_CCER_CC4P ((uint32_t)0x00002000) /*!<Capture/Compare 4 output Polarity */
+#define TIM_CCER_CC4NP ((uint32_t)0x00008000) /*!<Capture/Compare 4 Complementary output Polarity */
+
+/******************* Bit definition for TIM_CNT register *******************/
+#define TIM_CNT_CNT ((uint32_t)0xFFFFFFFF) /*!<Counter Value */
+
+/******************* Bit definition for TIM_PSC register *******************/
+#define TIM_PSC_PSC ((uint32_t)0x0000FFFF) /*!<Prescaler Value */
+
+/******************* Bit definition for TIM_ARR register *******************/
+#define TIM_ARR_ARR ((uint32_t)0xFFFFFFFF) /*!<actual auto-reload Value */
+
+/******************* Bit definition for TIM_RCR register *******************/
+#define TIM_RCR_REP ((uint32_t)0x000000FF) /*!<Repetition Counter Value */
+
+/******************* Bit definition for TIM_CCR1 register ******************/
+#define TIM_CCR1_CCR1 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 1 Value */
+
+/******************* Bit definition for TIM_CCR2 register ******************/
+#define TIM_CCR2_CCR2 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 2 Value */
+
+/******************* Bit definition for TIM_CCR3 register ******************/
+#define TIM_CCR3_CCR3 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 3 Value */
+
+/******************* Bit definition for TIM_CCR4 register ******************/
+#define TIM_CCR4_CCR4 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 4 Value */
+
+/******************* Bit definition for TIM_BDTR register ******************/
+#define TIM_BDTR_DTG ((uint32_t)0x000000FF) /*!<DTG[0:7] bits (Dead-Time Generator set-up) */
+#define TIM_BDTR_DTG_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_BDTR_DTG_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_BDTR_DTG_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define TIM_BDTR_DTG_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define TIM_BDTR_DTG_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define TIM_BDTR_DTG_5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define TIM_BDTR_DTG_6 ((uint32_t)0x00000040) /*!<Bit 6 */
+#define TIM_BDTR_DTG_7 ((uint32_t)0x00000080) /*!<Bit 7 */
+
+#define TIM_BDTR_LOCK ((uint32_t)0x00000300) /*!<LOCK[1:0] bits (Lock Configuration) */
+#define TIM_BDTR_LOCK_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_BDTR_LOCK_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_BDTR_OSSI ((uint32_t)0x00000400) /*!<Off-State Selection for Idle mode */
+#define TIM_BDTR_OSSR ((uint32_t)0x00000800) /*!<Off-State Selection for Run mode */
+#define TIM_BDTR_BKE ((uint32_t)0x00001000) /*!<Break enable */
+#define TIM_BDTR_BKP ((uint32_t)0x00002000) /*!<Break Polarity */
+#define TIM_BDTR_AOE ((uint32_t)0x00004000) /*!<Automatic Output enable */
+#define TIM_BDTR_MOE ((uint32_t)0x00008000) /*!<Main Output enable */
+
+/******************* Bit definition for TIM_DCR register *******************/
+#define TIM_DCR_DBA ((uint32_t)0x0000001F) /*!<DBA[4:0] bits (DMA Base Address) */
+#define TIM_DCR_DBA_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_DCR_DBA_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_DCR_DBA_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define TIM_DCR_DBA_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define TIM_DCR_DBA_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+
+#define TIM_DCR_DBL ((uint32_t)0x00001F00) /*!<DBL[4:0] bits (DMA Burst Length) */
+#define TIM_DCR_DBL_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_DCR_DBL_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define TIM_DCR_DBL_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define TIM_DCR_DBL_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define TIM_DCR_DBL_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+
+/******************* Bit definition for TIM_DMAR register ******************/
+#define TIM_DMAR_DMAB ((uint32_t)0x0000FFFF) /*!<DMA register for burst accesses */
+
+/******************* Bit definition for TIM14_OR register ********************/
+#define TIM14_OR_TI1_RMP ((uint32_t)0x00000003) /*!<TI1_RMP[1:0] bits (TIM14 Input 4 remap) */
+#define TIM14_OR_TI1_RMP_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM14_OR_TI1_RMP_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+/******************************************************************************/
+/* */
+/* Touch Sensing Controller (TSC) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for TSC_CR register *********************/
+#define TSC_CR_TSCE ((uint32_t)0x00000001) /*!<Touch sensing controller enable */
+#define TSC_CR_START ((uint32_t)0x00000002) /*!<Start acquisition */
+#define TSC_CR_AM ((uint32_t)0x00000004) /*!<Acquisition mode */
+#define TSC_CR_SYNCPOL ((uint32_t)0x00000008) /*!<Synchronization pin polarity */
+#define TSC_CR_IODEF ((uint32_t)0x00000010) /*!<IO default mode */
+
+#define TSC_CR_MCV ((uint32_t)0x000000E0) /*!<MCV[2:0] bits (Max Count Value) */
+#define TSC_CR_MCV_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define TSC_CR_MCV_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+#define TSC_CR_MCV_2 ((uint32_t)0x00000080) /*!<Bit 2 */
+
+#define TSC_CR_PGPSC ((uint32_t)0x00007000) /*!<PGPSC[2:0] bits (Pulse Generator Prescaler) */
+#define TSC_CR_PGPSC_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TSC_CR_PGPSC_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TSC_CR_PGPSC_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+
+#define TSC_CR_SSPSC ((uint32_t)0x00008000) /*!<Spread Spectrum Prescaler */
+#define TSC_CR_SSE ((uint32_t)0x00010000) /*!<Spread Spectrum Enable */
+
+#define TSC_CR_SSD ((uint32_t)0x00FE0000) /*!<SSD[6:0] bits (Spread Spectrum Deviation) */
+#define TSC_CR_SSD_0 ((uint32_t)0x00020000) /*!<Bit 0 */
+#define TSC_CR_SSD_1 ((uint32_t)0x00040000) /*!<Bit 1 */
+#define TSC_CR_SSD_2 ((uint32_t)0x00080000) /*!<Bit 2 */
+#define TSC_CR_SSD_3 ((uint32_t)0x00100000) /*!<Bit 3 */
+#define TSC_CR_SSD_4 ((uint32_t)0x00200000) /*!<Bit 4 */
+#define TSC_CR_SSD_5 ((uint32_t)0x00400000) /*!<Bit 5 */
+#define TSC_CR_SSD_6 ((uint32_t)0x00800000) /*!<Bit 6 */
+
+#define TSC_CR_CTPL ((uint32_t)0x0F000000) /*!<CTPL[3:0] bits (Charge Transfer pulse low) */
+#define TSC_CR_CTPL_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define TSC_CR_CTPL_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define TSC_CR_CTPL_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define TSC_CR_CTPL_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+
+#define TSC_CR_CTPH ((uint32_t)0xF0000000) /*!<CTPH[3:0] bits (Charge Transfer pulse high) */
+#define TSC_CR_CTPH_0 ((uint32_t)0x10000000) /*!<Bit 0 */
+#define TSC_CR_CTPH_1 ((uint32_t)0x20000000) /*!<Bit 1 */
+#define TSC_CR_CTPH_2 ((uint32_t)0x40000000) /*!<Bit 2 */
+#define TSC_CR_CTPH_3 ((uint32_t)0x80000000) /*!<Bit 3 */
+
+/******************* Bit definition for TSC_IER register ********************/
+#define TSC_IER_EOAIE ((uint32_t)0x00000001) /*!<End of acquisition interrupt enable */
+#define TSC_IER_MCEIE ((uint32_t)0x00000002) /*!<Max count error interrupt enable */
+
+/******************* Bit definition for TSC_ICR register ********************/
+#define TSC_ICR_EOAIC ((uint32_t)0x00000001) /*!<End of acquisition interrupt clear */
+#define TSC_ICR_MCEIC ((uint32_t)0x00000002) /*!<Max count error interrupt clear */
+
+/******************* Bit definition for TSC_ISR register ********************/
+#define TSC_ISR_EOAF ((uint32_t)0x00000001) /*!<End of acquisition flag */
+#define TSC_ISR_MCEF ((uint32_t)0x00000002) /*!<Max count error flag */
+
+/******************* Bit definition for TSC_IOHCR register ******************/
+#define TSC_IOHCR_G1_IO1 ((uint32_t)0x00000001) /*!<GROUP1_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G1_IO2 ((uint32_t)0x00000002) /*!<GROUP1_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G1_IO3 ((uint32_t)0x00000004) /*!<GROUP1_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G1_IO4 ((uint32_t)0x00000008) /*!<GROUP1_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G2_IO1 ((uint32_t)0x00000010) /*!<GROUP2_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G2_IO2 ((uint32_t)0x00000020) /*!<GROUP2_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G2_IO3 ((uint32_t)0x00000040) /*!<GROUP2_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G2_IO4 ((uint32_t)0x00000080) /*!<GROUP2_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G3_IO1 ((uint32_t)0x00000100) /*!<GROUP3_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G3_IO2 ((uint32_t)0x00000200) /*!<GROUP3_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G3_IO3 ((uint32_t)0x00000400) /*!<GROUP3_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G3_IO4 ((uint32_t)0x00000800) /*!<GROUP3_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G4_IO1 ((uint32_t)0x00001000) /*!<GROUP4_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G4_IO2 ((uint32_t)0x00002000) /*!<GROUP4_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G4_IO3 ((uint32_t)0x00004000) /*!<GROUP4_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G4_IO4 ((uint32_t)0x00008000) /*!<GROUP4_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G5_IO1 ((uint32_t)0x00010000) /*!<GROUP5_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G5_IO2 ((uint32_t)0x00020000) /*!<GROUP5_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G5_IO3 ((uint32_t)0x00040000) /*!<GROUP5_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G5_IO4 ((uint32_t)0x00080000) /*!<GROUP5_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G6_IO1 ((uint32_t)0x00100000) /*!<GROUP6_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G6_IO2 ((uint32_t)0x00200000) /*!<GROUP6_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G6_IO3 ((uint32_t)0x00400000) /*!<GROUP6_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G6_IO4 ((uint32_t)0x00800000) /*!<GROUP6_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G7_IO1 ((uint32_t)0x01000000) /*!<GROUP7_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G7_IO2 ((uint32_t)0x02000000) /*!<GROUP7_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G7_IO3 ((uint32_t)0x04000000) /*!<GROUP7_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G7_IO4 ((uint32_t)0x08000000) /*!<GROUP7_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G8_IO1 ((uint32_t)0x10000000) /*!<GROUP8_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G8_IO2 ((uint32_t)0x20000000) /*!<GROUP8_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G8_IO3 ((uint32_t)0x40000000) /*!<GROUP8_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G8_IO4 ((uint32_t)0x80000000) /*!<GROUP8_IO4 schmitt trigger hysteresis mode */
+
+/******************* Bit definition for TSC_IOASCR register *****************/
+#define TSC_IOASCR_G1_IO1 ((uint32_t)0x00000001) /*!<GROUP1_IO1 analog switch enable */
+#define TSC_IOASCR_G1_IO2 ((uint32_t)0x00000002) /*!<GROUP1_IO2 analog switch enable */
+#define TSC_IOASCR_G1_IO3 ((uint32_t)0x00000004) /*!<GROUP1_IO3 analog switch enable */
+#define TSC_IOASCR_G1_IO4 ((uint32_t)0x00000008) /*!<GROUP1_IO4 analog switch enable */
+#define TSC_IOASCR_G2_IO1 ((uint32_t)0x00000010) /*!<GROUP2_IO1 analog switch enable */
+#define TSC_IOASCR_G2_IO2 ((uint32_t)0x00000020) /*!<GROUP2_IO2 analog switch enable */
+#define TSC_IOASCR_G2_IO3 ((uint32_t)0x00000040) /*!<GROUP2_IO3 analog switch enable */
+#define TSC_IOASCR_G2_IO4 ((uint32_t)0x00000080) /*!<GROUP2_IO4 analog switch enable */
+#define TSC_IOASCR_G3_IO1 ((uint32_t)0x00000100) /*!<GROUP3_IO1 analog switch enable */
+#define TSC_IOASCR_G3_IO2 ((uint32_t)0x00000200) /*!<GROUP3_IO2 analog switch enable */
+#define TSC_IOASCR_G3_IO3 ((uint32_t)0x00000400) /*!<GROUP3_IO3 analog switch enable */
+#define TSC_IOASCR_G3_IO4 ((uint32_t)0x00000800) /*!<GROUP3_IO4 analog switch enable */
+#define TSC_IOASCR_G4_IO1 ((uint32_t)0x00001000) /*!<GROUP4_IO1 analog switch enable */
+#define TSC_IOASCR_G4_IO2 ((uint32_t)0x00002000) /*!<GROUP4_IO2 analog switch enable */
+#define TSC_IOASCR_G4_IO3 ((uint32_t)0x00004000) /*!<GROUP4_IO3 analog switch enable */
+#define TSC_IOASCR_G4_IO4 ((uint32_t)0x00008000) /*!<GROUP4_IO4 analog switch enable */
+#define TSC_IOASCR_G5_IO1 ((uint32_t)0x00010000) /*!<GROUP5_IO1 analog switch enable */
+#define TSC_IOASCR_G5_IO2 ((uint32_t)0x00020000) /*!<GROUP5_IO2 analog switch enable */
+#define TSC_IOASCR_G5_IO3 ((uint32_t)0x00040000) /*!<GROUP5_IO3 analog switch enable */
+#define TSC_IOASCR_G5_IO4 ((uint32_t)0x00080000) /*!<GROUP5_IO4 analog switch enable */
+#define TSC_IOASCR_G6_IO1 ((uint32_t)0x00100000) /*!<GROUP6_IO1 analog switch enable */
+#define TSC_IOASCR_G6_IO2 ((uint32_t)0x00200000) /*!<GROUP6_IO2 analog switch enable */
+#define TSC_IOASCR_G6_IO3 ((uint32_t)0x00400000) /*!<GROUP6_IO3 analog switch enable */
+#define TSC_IOASCR_G6_IO4 ((uint32_t)0x00800000) /*!<GROUP6_IO4 analog switch enable */
+#define TSC_IOASCR_G7_IO1 ((uint32_t)0x01000000) /*!<GROUP7_IO1 analog switch enable */
+#define TSC_IOASCR_G7_IO2 ((uint32_t)0x02000000) /*!<GROUP7_IO2 analog switch enable */
+#define TSC_IOASCR_G7_IO3 ((uint32_t)0x04000000) /*!<GROUP7_IO3 analog switch enable */
+#define TSC_IOASCR_G7_IO4 ((uint32_t)0x08000000) /*!<GROUP7_IO4 analog switch enable */
+#define TSC_IOASCR_G8_IO1 ((uint32_t)0x10000000) /*!<GROUP8_IO1 analog switch enable */
+#define TSC_IOASCR_G8_IO2 ((uint32_t)0x20000000) /*!<GROUP8_IO2 analog switch enable */
+#define TSC_IOASCR_G8_IO3 ((uint32_t)0x40000000) /*!<GROUP8_IO3 analog switch enable */
+#define TSC_IOASCR_G8_IO4 ((uint32_t)0x80000000) /*!<GROUP8_IO4 analog switch enable */
+
+/******************* Bit definition for TSC_IOSCR register ******************/
+#define TSC_IOSCR_G1_IO1 ((uint32_t)0x00000001) /*!<GROUP1_IO1 sampling mode */
+#define TSC_IOSCR_G1_IO2 ((uint32_t)0x00000002) /*!<GROUP1_IO2 sampling mode */
+#define TSC_IOSCR_G1_IO3 ((uint32_t)0x00000004) /*!<GROUP1_IO3 sampling mode */
+#define TSC_IOSCR_G1_IO4 ((uint32_t)0x00000008) /*!<GROUP1_IO4 sampling mode */
+#define TSC_IOSCR_G2_IO1 ((uint32_t)0x00000010) /*!<GROUP2_IO1 sampling mode */
+#define TSC_IOSCR_G2_IO2 ((uint32_t)0x00000020) /*!<GROUP2_IO2 sampling mode */
+#define TSC_IOSCR_G2_IO3 ((uint32_t)0x00000040) /*!<GROUP2_IO3 sampling mode */
+#define TSC_IOSCR_G2_IO4 ((uint32_t)0x00000080) /*!<GROUP2_IO4 sampling mode */
+#define TSC_IOSCR_G3_IO1 ((uint32_t)0x00000100) /*!<GROUP3_IO1 sampling mode */
+#define TSC_IOSCR_G3_IO2 ((uint32_t)0x00000200) /*!<GROUP3_IO2 sampling mode */
+#define TSC_IOSCR_G3_IO3 ((uint32_t)0x00000400) /*!<GROUP3_IO3 sampling mode */
+#define TSC_IOSCR_G3_IO4 ((uint32_t)0x00000800) /*!<GROUP3_IO4 sampling mode */
+#define TSC_IOSCR_G4_IO1 ((uint32_t)0x00001000) /*!<GROUP4_IO1 sampling mode */
+#define TSC_IOSCR_G4_IO2 ((uint32_t)0x00002000) /*!<GROUP4_IO2 sampling mode */
+#define TSC_IOSCR_G4_IO3 ((uint32_t)0x00004000) /*!<GROUP4_IO3 sampling mode */
+#define TSC_IOSCR_G4_IO4 ((uint32_t)0x00008000) /*!<GROUP4_IO4 sampling mode */
+#define TSC_IOSCR_G5_IO1 ((uint32_t)0x00010000) /*!<GROUP5_IO1 sampling mode */
+#define TSC_IOSCR_G5_IO2 ((uint32_t)0x00020000) /*!<GROUP5_IO2 sampling mode */
+#define TSC_IOSCR_G5_IO3 ((uint32_t)0x00040000) /*!<GROUP5_IO3 sampling mode */
+#define TSC_IOSCR_G5_IO4 ((uint32_t)0x00080000) /*!<GROUP5_IO4 sampling mode */
+#define TSC_IOSCR_G6_IO1 ((uint32_t)0x00100000) /*!<GROUP6_IO1 sampling mode */
+#define TSC_IOSCR_G6_IO2 ((uint32_t)0x00200000) /*!<GROUP6_IO2 sampling mode */
+#define TSC_IOSCR_G6_IO3 ((uint32_t)0x00400000) /*!<GROUP6_IO3 sampling mode */
+#define TSC_IOSCR_G6_IO4 ((uint32_t)0x00800000) /*!<GROUP6_IO4 sampling mode */
+#define TSC_IOSCR_G7_IO1 ((uint32_t)0x01000000) /*!<GROUP7_IO1 sampling mode */
+#define TSC_IOSCR_G7_IO2 ((uint32_t)0x02000000) /*!<GROUP7_IO2 sampling mode */
+#define TSC_IOSCR_G7_IO3 ((uint32_t)0x04000000) /*!<GROUP7_IO3 sampling mode */
+#define TSC_IOSCR_G7_IO4 ((uint32_t)0x08000000) /*!<GROUP7_IO4 sampling mode */
+#define TSC_IOSCR_G8_IO1 ((uint32_t)0x10000000) /*!<GROUP8_IO1 sampling mode */
+#define TSC_IOSCR_G8_IO2 ((uint32_t)0x20000000) /*!<GROUP8_IO2 sampling mode */
+#define TSC_IOSCR_G8_IO3 ((uint32_t)0x40000000) /*!<GROUP8_IO3 sampling mode */
+#define TSC_IOSCR_G8_IO4 ((uint32_t)0x80000000) /*!<GROUP8_IO4 sampling mode */
+
+/******************* Bit definition for TSC_IOCCR register ******************/
+#define TSC_IOCCR_G1_IO1 ((uint32_t)0x00000001) /*!<GROUP1_IO1 channel mode */
+#define TSC_IOCCR_G1_IO2 ((uint32_t)0x00000002) /*!<GROUP1_IO2 channel mode */
+#define TSC_IOCCR_G1_IO3 ((uint32_t)0x00000004) /*!<GROUP1_IO3 channel mode */
+#define TSC_IOCCR_G1_IO4 ((uint32_t)0x00000008) /*!<GROUP1_IO4 channel mode */
+#define TSC_IOCCR_G2_IO1 ((uint32_t)0x00000010) /*!<GROUP2_IO1 channel mode */
+#define TSC_IOCCR_G2_IO2 ((uint32_t)0x00000020) /*!<GROUP2_IO2 channel mode */
+#define TSC_IOCCR_G2_IO3 ((uint32_t)0x00000040) /*!<GROUP2_IO3 channel mode */
+#define TSC_IOCCR_G2_IO4 ((uint32_t)0x00000080) /*!<GROUP2_IO4 channel mode */
+#define TSC_IOCCR_G3_IO1 ((uint32_t)0x00000100) /*!<GROUP3_IO1 channel mode */
+#define TSC_IOCCR_G3_IO2 ((uint32_t)0x00000200) /*!<GROUP3_IO2 channel mode */
+#define TSC_IOCCR_G3_IO3 ((uint32_t)0x00000400) /*!<GROUP3_IO3 channel mode */
+#define TSC_IOCCR_G3_IO4 ((uint32_t)0x00000800) /*!<GROUP3_IO4 channel mode */
+#define TSC_IOCCR_G4_IO1 ((uint32_t)0x00001000) /*!<GROUP4_IO1 channel mode */
+#define TSC_IOCCR_G4_IO2 ((uint32_t)0x00002000) /*!<GROUP4_IO2 channel mode */
+#define TSC_IOCCR_G4_IO3 ((uint32_t)0x00004000) /*!<GROUP4_IO3 channel mode */
+#define TSC_IOCCR_G4_IO4 ((uint32_t)0x00008000) /*!<GROUP4_IO4 channel mode */
+#define TSC_IOCCR_G5_IO1 ((uint32_t)0x00010000) /*!<GROUP5_IO1 channel mode */
+#define TSC_IOCCR_G5_IO2 ((uint32_t)0x00020000) /*!<GROUP5_IO2 channel mode */
+#define TSC_IOCCR_G5_IO3 ((uint32_t)0x00040000) /*!<GROUP5_IO3 channel mode */
+#define TSC_IOCCR_G5_IO4 ((uint32_t)0x00080000) /*!<GROUP5_IO4 channel mode */
+#define TSC_IOCCR_G6_IO1 ((uint32_t)0x00100000) /*!<GROUP6_IO1 channel mode */
+#define TSC_IOCCR_G6_IO2 ((uint32_t)0x00200000) /*!<GROUP6_IO2 channel mode */
+#define TSC_IOCCR_G6_IO3 ((uint32_t)0x00400000) /*!<GROUP6_IO3 channel mode */
+#define TSC_IOCCR_G6_IO4 ((uint32_t)0x00800000) /*!<GROUP6_IO4 channel mode */
+#define TSC_IOCCR_G7_IO1 ((uint32_t)0x01000000) /*!<GROUP7_IO1 channel mode */
+#define TSC_IOCCR_G7_IO2 ((uint32_t)0x02000000) /*!<GROUP7_IO2 channel mode */
+#define TSC_IOCCR_G7_IO3 ((uint32_t)0x04000000) /*!<GROUP7_IO3 channel mode */
+#define TSC_IOCCR_G7_IO4 ((uint32_t)0x08000000) /*!<GROUP7_IO4 channel mode */
+#define TSC_IOCCR_G8_IO1 ((uint32_t)0x10000000) /*!<GROUP8_IO1 channel mode */
+#define TSC_IOCCR_G8_IO2 ((uint32_t)0x20000000) /*!<GROUP8_IO2 channel mode */
+#define TSC_IOCCR_G8_IO3 ((uint32_t)0x40000000) /*!<GROUP8_IO3 channel mode */
+#define TSC_IOCCR_G8_IO4 ((uint32_t)0x80000000) /*!<GROUP8_IO4 channel mode */
+
+/******************* Bit definition for TSC_IOGCSR register *****************/
+#define TSC_IOGCSR_G1E ((uint32_t)0x00000001) /*!<Analog IO GROUP1 enable */
+#define TSC_IOGCSR_G2E ((uint32_t)0x00000002) /*!<Analog IO GROUP2 enable */
+#define TSC_IOGCSR_G3E ((uint32_t)0x00000004) /*!<Analog IO GROUP3 enable */
+#define TSC_IOGCSR_G4E ((uint32_t)0x00000008) /*!<Analog IO GROUP4 enable */
+#define TSC_IOGCSR_G5E ((uint32_t)0x00000010) /*!<Analog IO GROUP5 enable */
+#define TSC_IOGCSR_G6E ((uint32_t)0x00000020) /*!<Analog IO GROUP6 enable */
+#define TSC_IOGCSR_G7E ((uint32_t)0x00000040) /*!<Analog IO GROUP7 enable */
+#define TSC_IOGCSR_G8E ((uint32_t)0x00000080) /*!<Analog IO GROUP8 enable */
+#define TSC_IOGCSR_G1S ((uint32_t)0x00010000) /*!<Analog IO GROUP1 status */
+#define TSC_IOGCSR_G2S ((uint32_t)0x00020000) /*!<Analog IO GROUP2 status */
+#define TSC_IOGCSR_G3S ((uint32_t)0x00040000) /*!<Analog IO GROUP3 status */
+#define TSC_IOGCSR_G4S ((uint32_t)0x00080000) /*!<Analog IO GROUP4 status */
+#define TSC_IOGCSR_G5S ((uint32_t)0x00100000) /*!<Analog IO GROUP5 status */
+#define TSC_IOGCSR_G6S ((uint32_t)0x00200000) /*!<Analog IO GROUP6 status */
+#define TSC_IOGCSR_G7S ((uint32_t)0x00400000) /*!<Analog IO GROUP7 status */
+#define TSC_IOGCSR_G8S ((uint32_t)0x00800000) /*!<Analog IO GROUP8 status */
+
+/******************* Bit definition for TSC_IOGXCR register *****************/
+#define TSC_IOGXCR_CNT ((uint32_t)0x00003FFF) /*!<CNT[13:0] bits (Counter value) */
+
+/******************************************************************************/
+/* */
+/* Universal Synchronous Asynchronous Receiver Transmitter (USART) */
+/* */
+/******************************************************************************/
+/****************** Bit definition for USART_CR1 register *******************/
+#define USART_CR1_UE ((uint32_t)0x00000001) /*!< USART Enable */
+#define USART_CR1_UESM ((uint32_t)0x00000002) /*!< USART Enable in STOP Mode */
+#define USART_CR1_RE ((uint32_t)0x00000004) /*!< Receiver Enable */
+#define USART_CR1_TE ((uint32_t)0x00000008) /*!< Transmitter Enable */
+#define USART_CR1_IDLEIE ((uint32_t)0x00000010) /*!< IDLE Interrupt Enable */
+#define USART_CR1_RXNEIE ((uint32_t)0x00000020) /*!< RXNE Interrupt Enable */
+#define USART_CR1_TCIE ((uint32_t)0x00000040) /*!< Transmission Complete Interrupt Enable */
+#define USART_CR1_TXEIE ((uint32_t)0x00000080) /*!< TXE Interrupt Enable */
+#define USART_CR1_PEIE ((uint32_t)0x00000100) /*!< PE Interrupt Enable */
+#define USART_CR1_PS ((uint32_t)0x00000200) /*!< Parity Selection */
+#define USART_CR1_PCE ((uint32_t)0x00000400) /*!< Parity Control Enable */
+#define USART_CR1_WAKE ((uint32_t)0x00000800) /*!< Receiver Wakeup method */
+#define USART_CR1_M0 ((uint32_t)0x00001000) /*!< Word length bit 0 */
+#define USART_CR1_M ((uint32_t)0x00001000) /*!< SmartCard Length */
+#define USART_CR1_MME ((uint32_t)0x00002000) /*!< Mute Mode Enable */
+#define USART_CR1_CMIE ((uint32_t)0x00004000) /*!< Character match interrupt enable */
+#define USART_CR1_OVER8 ((uint32_t)0x00008000) /*!< Oversampling by 8-bit or 16-bit mode */
+#define USART_CR1_DEDT ((uint32_t)0x001F0000) /*!< DEDT[4:0] bits (Driver Enable Deassertion Time) */
+#define USART_CR1_DEDT_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define USART_CR1_DEDT_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define USART_CR1_DEDT_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define USART_CR1_DEDT_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+#define USART_CR1_DEDT_4 ((uint32_t)0x00100000) /*!< Bit 4 */
+#define USART_CR1_DEAT ((uint32_t)0x03E00000) /*!< DEAT[4:0] bits (Driver Enable Assertion Time) */
+#define USART_CR1_DEAT_0 ((uint32_t)0x00200000) /*!< Bit 0 */
+#define USART_CR1_DEAT_1 ((uint32_t)0x00400000) /*!< Bit 1 */
+#define USART_CR1_DEAT_2 ((uint32_t)0x00800000) /*!< Bit 2 */
+#define USART_CR1_DEAT_3 ((uint32_t)0x01000000) /*!< Bit 3 */
+#define USART_CR1_DEAT_4 ((uint32_t)0x02000000) /*!< Bit 4 */
+#define USART_CR1_RTOIE ((uint32_t)0x04000000) /*!< Receive Time Out interrupt enable */
+#define USART_CR1_EOBIE ((uint32_t)0x08000000) /*!< End of Block interrupt enable */
+
+/****************** Bit definition for USART_CR2 register *******************/
+#define USART_CR2_ADDM7 ((uint32_t)0x00000010) /*!< 7-bit or 4-bit Address Detection */
+#define USART_CR2_LBDL ((uint32_t)0x00000020) /*!< LIN Break Detection Length */
+#define USART_CR2_LBDIE ((uint32_t)0x00000040) /*!< LIN Break Detection Interrupt Enable */
+#define USART_CR2_LBCL ((uint32_t)0x00000100) /*!< Last Bit Clock pulse */
+#define USART_CR2_CPHA ((uint32_t)0x00000200) /*!< Clock Phase */
+#define USART_CR2_CPOL ((uint32_t)0x00000400) /*!< Clock Polarity */
+#define USART_CR2_CLKEN ((uint32_t)0x00000800) /*!< Clock Enable */
+#define USART_CR2_STOP ((uint32_t)0x00003000) /*!< STOP[1:0] bits (STOP bits) */
+#define USART_CR2_STOP_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define USART_CR2_STOP_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+#define USART_CR2_LINEN ((uint32_t)0x00004000) /*!< LIN mode enable */
+#define USART_CR2_SWAP ((uint32_t)0x00008000) /*!< SWAP TX/RX pins */
+#define USART_CR2_RXINV ((uint32_t)0x00010000) /*!< RX pin active level inversion */
+#define USART_CR2_TXINV ((uint32_t)0x00020000) /*!< TX pin active level inversion */
+#define USART_CR2_DATAINV ((uint32_t)0x00040000) /*!< Binary data inversion */
+#define USART_CR2_MSBFIRST ((uint32_t)0x00080000) /*!< Most Significant Bit First */
+#define USART_CR2_ABREN ((uint32_t)0x00100000) /*!< Auto Baud-Rate Enable*/
+#define USART_CR2_ABRMODE ((uint32_t)0x00600000) /*!< ABRMOD[1:0] bits (Auto Baud-Rate Mode) */
+#define USART_CR2_ABRMODE_0 ((uint32_t)0x00200000) /*!< Bit 0 */
+#define USART_CR2_ABRMODE_1 ((uint32_t)0x00400000) /*!< Bit 1 */
+#define USART_CR2_RTOEN ((uint32_t)0x00800000) /*!< Receiver Time-Out enable */
+#define USART_CR2_ADD ((uint32_t)0xFF000000) /*!< Address of the USART node */
+
+/****************** Bit definition for USART_CR3 register *******************/
+#define USART_CR3_EIE ((uint32_t)0x00000001) /*!< Error Interrupt Enable */
+#define USART_CR3_IREN ((uint32_t)0x00000002) /*!< IrDA mode Enable */
+#define USART_CR3_IRLP ((uint32_t)0x00000004) /*!< IrDA Low-Power */
+#define USART_CR3_HDSEL ((uint32_t)0x00000008) /*!< Half-Duplex Selection */
+#define USART_CR3_NACK ((uint32_t)0x00000010) /*!< SmartCard NACK enable */
+#define USART_CR3_SCEN ((uint32_t)0x00000020) /*!< SmartCard mode enable */
+#define USART_CR3_DMAR ((uint32_t)0x00000040) /*!< DMA Enable Receiver */
+#define USART_CR3_DMAT ((uint32_t)0x00000080) /*!< DMA Enable Transmitter */
+#define USART_CR3_RTSE ((uint32_t)0x00000100) /*!< RTS Enable */
+#define USART_CR3_CTSE ((uint32_t)0x00000200) /*!< CTS Enable */
+#define USART_CR3_CTSIE ((uint32_t)0x00000400) /*!< CTS Interrupt Enable */
+#define USART_CR3_ONEBIT ((uint32_t)0x00000800) /*!< One sample bit method enable */
+#define USART_CR3_OVRDIS ((uint32_t)0x00001000) /*!< Overrun Disable */
+#define USART_CR3_DDRE ((uint32_t)0x00002000) /*!< DMA Disable on Reception Error */
+#define USART_CR3_DEM ((uint32_t)0x00004000) /*!< Driver Enable Mode */
+#define USART_CR3_DEP ((uint32_t)0x00008000) /*!< Driver Enable Polarity Selection */
+#define USART_CR3_SCARCNT ((uint32_t)0x000E0000) /*!< SCARCNT[2:0] bits (SmartCard Auto-Retry Count) */
+#define USART_CR3_SCARCNT_0 ((uint32_t)0x00020000) /*!< Bit 0 */
+#define USART_CR3_SCARCNT_1 ((uint32_t)0x00040000) /*!< Bit 1 */
+#define USART_CR3_SCARCNT_2 ((uint32_t)0x00080000) /*!< Bit 2 */
+#define USART_CR3_WUS ((uint32_t)0x00300000) /*!< WUS[1:0] bits (Wake UP Interrupt Flag Selection) */
+#define USART_CR3_WUS_0 ((uint32_t)0x00100000) /*!< Bit 0 */
+#define USART_CR3_WUS_1 ((uint32_t)0x00200000) /*!< Bit 1 */
+#define USART_CR3_WUFIE ((uint32_t)0x00400000) /*!< Wake Up Interrupt Enable */
+
+/****************** Bit definition for USART_BRR register *******************/
+#define USART_BRR_DIV_FRACTION ((uint32_t)0x0000000F) /*!< Fraction of USARTDIV */
+#define USART_BRR_DIV_MANTISSA ((uint32_t)0x0000FFF0) /*!< Mantissa of USARTDIV */
+
+/****************** Bit definition for USART_GTPR register ******************/
+#define USART_GTPR_PSC ((uint32_t)0x000000FF) /*!< PSC[7:0] bits (Prescaler value) */
+#define USART_GTPR_GT ((uint32_t)0x0000FF00) /*!< GT[7:0] bits (Guard time value) */
+
+
+/******************* Bit definition for USART_RTOR register *****************/
+#define USART_RTOR_RTO ((uint32_t)0x00FFFFFF) /*!< Receiver Time Out Value */
+#define USART_RTOR_BLEN ((uint32_t)0xFF000000) /*!< Block Length */
+
+/******************* Bit definition for USART_RQR register ******************/
+#define USART_RQR_ABRRQ ((uint32_t)0x00000001) /*!< Auto-Baud Rate Request */
+#define USART_RQR_SBKRQ ((uint32_t)0x00000002) /*!< Send Break Request */
+#define USART_RQR_MMRQ ((uint32_t)0x00000004) /*!< Mute Mode Request */
+#define USART_RQR_RXFRQ ((uint32_t)0x00000008) /*!< Receive Data flush Request */
+#define USART_RQR_TXFRQ ((uint32_t)0x00000010) /*!< Transmit data flush Request */
+
+/******************* Bit definition for USART_ISR register ******************/
+#define USART_ISR_PE ((uint32_t)0x00000001) /*!< Parity Error */
+#define USART_ISR_FE ((uint32_t)0x00000002) /*!< Framing Error */
+#define USART_ISR_NE ((uint32_t)0x00000004) /*!< Noise detected Flag */
+#define USART_ISR_ORE ((uint32_t)0x00000008) /*!< OverRun Error */
+#define USART_ISR_IDLE ((uint32_t)0x00000010) /*!< IDLE line detected */
+#define USART_ISR_RXNE ((uint32_t)0x00000020) /*!< Read Data Register Not Empty */
+#define USART_ISR_TC ((uint32_t)0x00000040) /*!< Transmission Complete */
+#define USART_ISR_TXE ((uint32_t)0x00000080) /*!< Transmit Data Register Empty */
+#define USART_ISR_LBDF ((uint32_t)0x00000100) /*!< LIN Break Detection Flag */
+#define USART_ISR_CTSIF ((uint32_t)0x00000200) /*!< CTS interrupt flag */
+#define USART_ISR_CTS ((uint32_t)0x00000400) /*!< CTS flag */
+#define USART_ISR_RTOF ((uint32_t)0x00000800) /*!< Receiver Time Out */
+#define USART_ISR_EOBF ((uint32_t)0x00001000) /*!< End Of Block Flag */
+#define USART_ISR_ABRE ((uint32_t)0x00004000) /*!< Auto-Baud Rate Error */
+#define USART_ISR_ABRF ((uint32_t)0x00008000) /*!< Auto-Baud Rate Flag */
+#define USART_ISR_BUSY ((uint32_t)0x00010000) /*!< Busy Flag */
+#define USART_ISR_CMF ((uint32_t)0x00020000) /*!< Character Match Flag */
+#define USART_ISR_SBKF ((uint32_t)0x00040000) /*!< Send Break Flag */
+#define USART_ISR_RWU ((uint32_t)0x00080000) /*!< Receive Wake Up from mute mode Flag */
+#define USART_ISR_WUF ((uint32_t)0x00100000) /*!< Wake Up from stop mode Flag */
+#define USART_ISR_TEACK ((uint32_t)0x00200000) /*!< Transmit Enable Acknowledge Flag */
+#define USART_ISR_REACK ((uint32_t)0x00400000) /*!< Receive Enable Acknowledge Flag */
+
+/******************* Bit definition for USART_ICR register ******************/
+#define USART_ICR_PECF ((uint32_t)0x00000001) /*!< Parity Error Clear Flag */
+#define USART_ICR_FECF ((uint32_t)0x00000002) /*!< Framing Error Clear Flag */
+#define USART_ICR_NCF ((uint32_t)0x00000004) /*!< Noise detected Clear Flag */
+#define USART_ICR_ORECF ((uint32_t)0x00000008) /*!< OverRun Error Clear Flag */
+#define USART_ICR_IDLECF ((uint32_t)0x00000010) /*!< IDLE line detected Clear Flag */
+#define USART_ICR_TCCF ((uint32_t)0x00000040) /*!< Transmission Complete Clear Flag */
+#define USART_ICR_LBDCF ((uint32_t)0x00000100) /*!< LIN Break Detection Clear Flag */
+#define USART_ICR_CTSCF ((uint32_t)0x00000200) /*!< CTS Interrupt Clear Flag */
+#define USART_ICR_RTOCF ((uint32_t)0x00000800) /*!< Receiver Time Out Clear Flag */
+#define USART_ICR_EOBCF ((uint32_t)0x00001000) /*!< End Of Block Clear Flag */
+#define USART_ICR_CMCF ((uint32_t)0x00020000) /*!< Character Match Clear Flag */
+#define USART_ICR_WUCF ((uint32_t)0x00100000) /*!< Wake Up from stop mode Clear Flag */
+
+/******************* Bit definition for USART_RDR register ******************/
+#define USART_RDR_RDR ((uint16_t)0x01FF) /*!< RDR[8:0] bits (Receive Data value) */
+
+/******************* Bit definition for USART_TDR register ******************/
+#define USART_TDR_TDR ((uint16_t)0x01FF) /*!< TDR[8:0] bits (Transmit Data value) */
+
+/******************************************************************************/
+/* */
+/* Window WATCHDOG (WWDG) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for WWDG_CR register ********************/
+#define WWDG_CR_T ((uint32_t)0x7F) /*!<T[6:0] bits (7-Bit counter (MSB to LSB)) */
+#define WWDG_CR_T0 ((uint32_t)0x01) /*!<Bit 0 */
+#define WWDG_CR_T1 ((uint32_t)0x02) /*!<Bit 1 */
+#define WWDG_CR_T2 ((uint32_t)0x04) /*!<Bit 2 */
+#define WWDG_CR_T3 ((uint32_t)0x08) /*!<Bit 3 */
+#define WWDG_CR_T4 ((uint32_t)0x10) /*!<Bit 4 */
+#define WWDG_CR_T5 ((uint32_t)0x20) /*!<Bit 5 */
+#define WWDG_CR_T6 ((uint32_t)0x40) /*!<Bit 6 */
+
+#define WWDG_CR_WDGA ((uint32_t)0x80) /*!<Activation bit */
+
+/******************* Bit definition for WWDG_CFR register *******************/
+#define WWDG_CFR_W ((uint32_t)0x007F) /*!<W[6:0] bits (7-bit window value) */
+#define WWDG_CFR_W0 ((uint32_t)0x0001) /*!<Bit 0 */
+#define WWDG_CFR_W1 ((uint32_t)0x0002) /*!<Bit 1 */
+#define WWDG_CFR_W2 ((uint32_t)0x0004) /*!<Bit 2 */
+#define WWDG_CFR_W3 ((uint32_t)0x0008) /*!<Bit 3 */
+#define WWDG_CFR_W4 ((uint32_t)0x0010) /*!<Bit 4 */
+#define WWDG_CFR_W5 ((uint32_t)0x0020) /*!<Bit 5 */
+#define WWDG_CFR_W6 ((uint32_t)0x0040) /*!<Bit 6 */
+
+#define WWDG_CFR_WDGTB ((uint32_t)0x0180) /*!<WDGTB[1:0] bits (Timer Base) */
+#define WWDG_CFR_WDGTB0 ((uint32_t)0x0080) /*!<Bit 0 */
+#define WWDG_CFR_WDGTB1 ((uint32_t)0x0100) /*!<Bit 1 */
+
+#define WWDG_CFR_EWI ((uint32_t)0x0200) /*!<Early Wakeup Interrupt */
+
+/******************* Bit definition for WWDG_SR register ********************/
+#define WWDG_SR_EWIF ((uint32_t)0x01) /*!<Early Wakeup Interrupt Flag */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+
+/** @addtogroup Exported_macro
+ * @{
+ */
+
+/****************************** ADC Instances *********************************/
+#define IS_ADC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == ADC1)
+
+#define IS_ADC_COMMON_INSTANCE(INSTANCE) ((INSTANCE) == ADC)
+
+/****************************** COMP Instances *********************************/
+#define IS_COMP_ALL_INSTANCE(INSTANCE) (((INSTANCE) == COMP1) || \
+ ((INSTANCE) == COMP2))
+
+#define IS_COMP_DAC1SWITCH_INSTANCE(INSTANCE) ((INSTANCE) == COMP1)
+
+#define IS_COMP_WINDOWMODE_INSTANCE(INSTANCE) ((INSTANCE) == COMP2)
+
+/****************************** CEC Instances *********************************/
+#define IS_CEC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CEC)
+
+/****************************** CRC Instances *********************************/
+#define IS_CRC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CRC)
+
+/******************************* DAC Instances ********************************/
+#define IS_DAC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == DAC)
+
+/******************************* DMA Instances ******************************/
+#define IS_DMA_ALL_INSTANCE(INSTANCE) (((INSTANCE) == DMA1_Channel1) || \
+ ((INSTANCE) == DMA1_Channel2) || \
+ ((INSTANCE) == DMA1_Channel3) || \
+ ((INSTANCE) == DMA1_Channel4) || \
+ ((INSTANCE) == DMA1_Channel5))
+
+/****************************** GPIO Instances ********************************/
+#define IS_GPIO_ALL_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB) || \
+ ((INSTANCE) == GPIOC) || \
+ ((INSTANCE) == GPIOD) || \
+ ((INSTANCE) == GPIOF))
+
+#define IS_GPIO_AF_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB))
+
+#define IS_GPIO_LOCK_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB))
+
+/****************************** I2C Instances *********************************/
+#define IS_I2C_ALL_INSTANCE(INSTANCE) (((INSTANCE) == I2C1) || \
+ ((INSTANCE) == I2C2))
+
+/****************************** I2S Instances *********************************/
+#define IS_I2S_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
+ ((INSTANCE) == SPI2))
+
+/****************************** IWDG Instances ********************************/
+#define IS_IWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == IWDG)
+
+/****************************** RTC Instances *********************************/
+#define IS_RTC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == RTC)
+
+/****************************** SMBUS Instances *********************************/
+#define IS_SMBUS_ALL_INSTANCE(INSTANCE) ((INSTANCE) == I2C1)
+
+/****************************** SPI Instances *********************************/
+#define IS_SPI_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
+ ((INSTANCE) == SPI2))
+
+/****************************** TIM Instances *********************************/
+#define IS_TIM_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM6) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CC1_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CC2_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_CC3_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CC4_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_TIX_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_ENCODER_INTERFACE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_HALL_INTERFACE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1))
+
+#define IS_TIM_XOR_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_MASTER_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM6) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_SLAVE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_32B_COUNTER_INSTANCE(INSTANCE)\
+ ((INSTANCE) == TIM2)
+
+#define IS_TIM_DMABURST_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_BREAK_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CCX_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM2) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM3) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM14) && \
+ (((CHANNEL) == TIM_CHANNEL_1))) \
+ || \
+ (((INSTANCE) == TIM15) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))) \
+ || \
+ (((INSTANCE) == TIM16) && \
+ (((CHANNEL) == TIM_CHANNEL_1))) \
+ || \
+ (((INSTANCE) == TIM17) && \
+ (((CHANNEL) == TIM_CHANNEL_1))))
+
+#define IS_TIM_CCXN_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3))) \
+ || \
+ (((INSTANCE) == TIM15) && \
+ ((CHANNEL) == TIM_CHANNEL_1)) \
+ || \
+ (((INSTANCE) == TIM16) && \
+ ((CHANNEL) == TIM_CHANNEL_1)) \
+ || \
+ (((INSTANCE) == TIM17) && \
+ ((CHANNEL) == TIM_CHANNEL_1)))
+
+#define IS_TIM_COUNTER_MODE_SELECT_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_REPETITION_COUNTER_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CLOCK_DIVISION_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_DMA_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM6) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_DMA_CC_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_COMMUTATION_EVENT_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_REMAP_INSTANCE(INSTANCE)\
+ ((INSTANCE) == TIM14)
+
+/****************************** TSC Instances *********************************/
+#define IS_TSC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == TSC)
+
+/*********************** UART Instances : IRDA mode ***************************/
+#define IS_IRDA_INSTANCE(INSTANCE) ((INSTANCE) == USART1)
+
+/********************* UART Instances : Smard card mode ***********************/
+#define IS_SMARTCARD_INSTANCE(INSTANCE) ((INSTANCE) == USART1)
+
+/******************** USART Instances : Synchronous mode **********************/
+#define IS_USART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/******************** USART Instances : auto Baud rate detection **************/
+#define IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(INSTANCE) ((INSTANCE) == USART1)
+
+/******************** UART Instances : Asynchronous mode **********************/
+#define IS_UART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/******************** UART Instances : Half-Duplex mode **********************/
+#define IS_UART_HALFDUPLEX_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/****************** UART Instances : Hardware Flow control ********************/
+#define IS_UART_HWFLOW_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/****************** UART Instances : LIN mode ********************/
+#define IS_UART_LIN_INSTANCE(INSTANCE) ((INSTANCE) == USART1)
+
+/****************** UART Instances : wakeup from stop mode ********************/
+#define IS_UART_WAKEUP_INSTANCE(INSTANCE) ((INSTANCE) == USART1)
+
+/****************** UART Instances : Auto Baud Rate detection ********************/
+#define IS_UART_AUTOBAUDRATE_DETECTION_INSTANCE(INSTANCE) ((INSTANCE) == USART1)
+
+/****************** UART Instances : Driver enable detection ********************/
+#define IS_UART_DRIVER_ENABLE_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/****************************** WWDG Instances ********************************/
+#define IS_WWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == WWDG)
+
+/**
+ * @}
+ */
+
+
+/******************************************************************************/
+/* For a painless codes migration between the STM32F0xx device product */
+/* lines, the aliases defined below are put in place to overcome the */
+/* differences in the interrupt handlers and IRQn definitions. */
+/* No need to update developed interrupt code when moving across */
+/* product lines within the same STM32F0 Family */
+/******************************************************************************/
+
+/* Aliases for __IRQn */
+#define PVD_VDDIO2_IRQn PVD_IRQn
+#define RCC_CRS_IRQn RCC_IRQn
+#define DMA1_Channel4_5_6_7_IRQn DMA1_Channel4_5_IRQn
+#define ADC1_IRQn ADC1_COMP_IRQn
+#define TIM6_IRQn TIM6_DAC_IRQn
+
+/* Aliases for __IRQHandler */
+#define PVD_VDDIO2_IRQHandler PVD_IRQHandler
+#define RCC_CRS_IRQHandler RCC_IRQHandler
+#define DMA1_Channel4_5_6_7_IRQHandler DMA1_Channel4_5_IRQHandler
+#define ADC1_IRQHandler ADC1_COMP_IRQHandler
+#define TIM6_IRQHandler TIM6_DAC_IRQHandler
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F051x8_H */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/include/devices/stm32f058xx.h b/f0/include/devices/stm32f058xx.h
new file mode 100755
index 0000000000000000000000000000000000000000..a7466efd232798bc6ff910be48d461c04a660d91
--- /dev/null
+++ b/f0/include/devices/stm32f058xx.h
@@ -0,0 +1,3785 @@
+/**
+ ******************************************************************************
+ * @file stm32f058xx.h
+ * @author MCD Application Team
+ * @version V2.2.1
+ * @date 09-January-2015
+ * @brief CMSIS STM32F058xx devices Peripheral Access Layer Header File.
+ *
+ * This file contains:
+ * - Data structures and the address mapping for all peripherals
+ * - Peripheral's registers declarations and bits definition
+ * - Macros to access peripheral’s registers hardware
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS_Device
+ * @{
+ */
+
+/** @addtogroup stm32f058x8
+ * @{
+ */
+
+#ifndef __STM32F058x8_H
+#define __STM32F058x8_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+
+/**
+ * @brief Configuration of the Cortex-M0 Processor and Core Peripherals
+ */
+#define __CM0_REV 0 /*!< Core Revision r0p0 */
+#define __MPU_PRESENT 0 /*!< STM32F0xx do not provide MPU */
+#define __NVIC_PRIO_BITS 2 /*!< STM32F0xx uses 2 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F058x8 device Interrupt Number Definition
+ */
+typedef enum
+{
+/****** Cortex-M0 Processor Exceptions Numbers **************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */
+ SVC_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */
+
+/****** STM32F058x8 specific Interrupt Numbers **************************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ RTC_IRQn = 2, /*!< RTC Interrupt through EXTI Lines 17, 19 and 20 */
+ FLASH_IRQn = 3, /*!< FLASH global Interrupt */
+ RCC_IRQn = 4, /*!< RCC global Interrupt */
+ EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupts */
+ EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupts */
+ EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupts */
+ TSC_IRQn = 8, /*!< Touch Sensing Controller Interrupts */
+ DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */
+ DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupts */
+ DMA1_Channel4_5_IRQn = 11, /*!< DMA1 Channel 4 and Channel 5 Interrupts */
+ ADC1_COMP_IRQn = 12, /*!< ADC1 and COMP interrupts (ADC interrupt combined with EXTI Lines 21 and 22 */
+ TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupts */
+ TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 15, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 16, /*!< TIM3 global Interrupt */
+ TIM6_DAC_IRQn = 17, /*!< TIM6 global and DAC channel underrun error Interrupts */
+ TIM14_IRQn = 19, /*!< TIM14 global Interrupt */
+ TIM15_IRQn = 20, /*!< TIM15 global Interrupt */
+ TIM16_IRQn = 21, /*!< TIM16 global Interrupt */
+ TIM17_IRQn = 22, /*!< TIM17 global Interrupt */
+ I2C1_IRQn = 23, /*!< I2C1 Event Interrupt & EXTI Line23 Interrupt (I2C1 wakeup) */
+ I2C2_IRQn = 24, /*!< I2C2 Event Interrupt */
+ SPI1_IRQn = 25, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 26, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 27, /*!< USART1 global Interrupt & EXTI Line25 Interrupt (USART1 wakeup) */
+ USART2_IRQn = 28, /*!< USART2 global Interrupt */
+ CEC_CAN_IRQn = 30 /*!< CEC and CAN global Interrupts & EXTI Line27 Interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm0.h" /* Cortex-M0 processor and core peripherals */
+#include "system_stm32f0xx.h" /* STM32F0xx System Header */
+#include <stdint.h>
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< ADC Interrupt and Status register, Address offset:0x00 */
+ __IO uint32_t IER; /*!< ADC Interrupt Enable register, Address offset:0x04 */
+ __IO uint32_t CR; /*!< ADC Control register, Address offset:0x08 */
+ __IO uint32_t CFGR1; /*!< ADC Configuration register 1, Address offset:0x0C */
+ __IO uint32_t CFGR2; /*!< ADC Configuration register 2, Address offset:0x10 */
+ __IO uint32_t SMPR; /*!< ADC Sampling time register, Address offset:0x14 */
+ uint32_t RESERVED1; /*!< Reserved, 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, 0x1C */
+ __IO uint32_t TR; /*!< ADC watchdog threshold register, Address offset:0x20 */
+ uint32_t RESERVED3; /*!< Reserved, 0x24 */
+ __IO uint32_t CHSELR; /*!< ADC channel selection register, Address offset:0x28 */
+ uint32_t RESERVED4[5]; /*!< Reserved, 0x2C */
+ __IO uint32_t DR; /*!< ADC data register, Address offset:0x40 */
+}ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CCR;
+}ADC_Common_TypeDef;
+
+/**
+ * @brief HDMI-CEC
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< CEC control register, Address offset:0x00 */
+ __IO uint32_t CFGR; /*!< CEC configuration register, Address offset:0x04 */
+ __IO uint32_t TXDR; /*!< CEC Tx data register , Address offset:0x08 */
+ __IO uint32_t RXDR; /*!< CEC Rx Data Register, Address offset:0x0C */
+ __IO uint32_t ISR; /*!< CEC Interrupt and Status Register, Address offset:0x10 */
+ __IO uint32_t IER; /*!< CEC interrupt enable register, Address offset:0x14 */
+}CEC_TypeDef;
+
+/**
+ * @brief Comparator
+ */
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< Comparator 1 & 2 control Status register, Address offset: 0x00 */
+}COMP1_2_TypeDef;
+
+typedef struct
+{
+ __IO uint16_t CSR; /*!< Comparator control Status register, Address offset: 0x00 */
+}COMP_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+ uint32_t RESERVED2; /*!< Reserved, 0x0C */
+ __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */
+ __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */
+}CRC_TypeDef;
+
+/**
+ * @brief Digital to Analog Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */
+ __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */
+ __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */
+ __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */
+ __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */
+ __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */
+ __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */
+}DAC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< DMA channel x configuration register */
+ __IO uint32_t CNDTR; /*!< DMA channel x number of data register */
+ __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */
+ __IO uint32_t CMAR; /*!< DMA channel x memory address register */
+}DMA_Channel_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */
+ __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */
+}DMA_TypeDef;
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!<EXTI Interrupt mask register, Address offset: 0x00 */
+ __IO uint32_t EMR; /*!<EXTI Event mask register, Address offset: 0x04 */
+ __IO uint32_t RTSR; /*!<EXTI Rising trigger selection register , Address offset: 0x08 */
+ __IO uint32_t FTSR; /*!<EXTI Falling trigger selection register, Address offset: 0x0C */
+ __IO uint32_t SWIER; /*!<EXTI Software interrupt event register, Address offset: 0x10 */
+ __IO uint32_t PR; /*!<EXTI Pending register, Address offset: 0x14 */
+}EXTI_TypeDef;
+
+/**
+ * @brief FLASH Registers
+ */
+typedef struct
+{
+ __IO uint32_t ACR; /*!<FLASH access control register, Address offset: 0x00 */
+ __IO uint32_t KEYR; /*!<FLASH key register, Address offset: 0x04 */
+ __IO uint32_t OPTKEYR; /*!<FLASH OPT key register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!<FLASH status register, Address offset: 0x0C */
+ __IO uint32_t CR; /*!<FLASH control register, Address offset: 0x10 */
+ __IO uint32_t AR; /*!<FLASH address register, Address offset: 0x14 */
+ __IO uint32_t RESERVED; /*!< Reserved, 0x18 */
+ __IO uint32_t OBR; /*!<FLASH option bytes register, Address offset: 0x1C */
+ __IO uint32_t WRPR; /*!<FLASH option bytes register, Address offset: 0x20 */
+}FLASH_TypeDef;
+
+
+/**
+ * @brief Option Bytes Registers
+ */
+typedef struct
+{
+ __IO uint16_t RDP; /*!< FLASH option byte Read protection, Address offset: 0x00 */
+ __IO uint16_t USER; /*!< FLASH option byte user options, Address offset: 0x02 */
+ __IO uint16_t DATA0; /*!< User data byte 0 (stored in FLASH_OBR[23:16]), Address offset: 0x04 */
+ __IO uint16_t DATA1; /*!< User data byte 1 (stored in FLASH_OBR[31:24]), Address offset: 0x06 */
+ __IO uint16_t WRP0; /*!< FLASH option byte write protection 0, Address offset: 0x08 */
+ __IO uint16_t WRP1; /*!< FLASH option byte write protection 1, Address offset: 0x0A */
+ __IO uint16_t WRP2; /*!< FLASH option byte write protection 2, Address offset: 0x0C */
+ __IO uint16_t WRP3; /*!< FLASH option byte write protection 3, Address offset: 0x0E */
+}OB_TypeDef;
+
+/**
+ * @brief General Purpose I/O
+ */
+
+typedef struct
+{
+ __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */
+ __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */
+ __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */
+ __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */
+ __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */
+ __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */
+ __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x1A */
+ __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */
+ __IO uint32_t AFR[2]; /*!< GPIO alternate function low register, Address offset: 0x20-0x24 */
+ __IO uint32_t BRR; /*!< GPIO bit reset register, Address offset: 0x28 */
+}GPIO_TypeDef;
+
+/**
+ * @brief SysTem Configuration
+ */
+
+typedef struct
+{
+ __IO uint32_t CFGR1; /*!< SYSCFG configuration register 1, Address offset: 0x00 */
+ uint32_t RESERVED; /*!< Reserved, 0x04 */
+ __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration register, Address offset: 0x14-0x08 */
+ __IO uint32_t CFGR2; /*!< SYSCFG configuration register 2, Address offset: 0x18 */
+}SYSCFG_TypeDef;
+
+/**
+ * @brief Inter-integrated Circuit Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */
+ __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */
+ __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */
+ __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */
+ __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */
+ __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */
+ __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */
+ __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */
+ __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */
+ __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */
+}I2C_TypeDef;
+
+/**
+ * @brief Independent WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */
+ __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */
+ __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */
+ __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */
+}IWDG_TypeDef;
+
+/**
+ * @brief Power Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< PWR power control register, Address offset: 0x00 */
+ __IO uint32_t CSR; /*!< PWR power control/status register, Address offset: 0x04 */
+}PWR_TypeDef;
+
+/**
+ * @brief Reset and Clock Control
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */
+ __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x04 */
+ __IO uint32_t CIR; /*!< RCC clock interrupt register, Address offset: 0x08 */
+ __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x0C */
+ __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x10 */
+ __IO uint32_t AHBENR; /*!< RCC AHB peripheral clock register, Address offset: 0x14 */
+ __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x18 */
+ __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x1C */
+ __IO uint32_t BDCR; /*!< RCC Backup domain control register, Address offset: 0x20 */
+ __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x24 */
+ __IO uint32_t AHBRSTR; /*!< RCC AHB peripheral reset register, Address offset: 0x28 */
+ __IO uint32_t CFGR2; /*!< RCC clock configuration register 2, Address offset: 0x2C */
+ __IO uint32_t CFGR3; /*!< RCC clock configuration register 3, Address offset: 0x30 */
+ __IO uint32_t CR2; /*!< RCC clock control register 2, Address offset: 0x34 */
+}RCC_TypeDef;
+
+/**
+ * @brief Real-Time Clock
+ */
+
+typedef struct
+{
+ __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */
+ __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */
+ uint32_t RESERVED1; /*!< Reserved, Address offset: 0x14 */
+ uint32_t RESERVED2; /*!< Reserved, Address offset: 0x18 */
+ __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */
+ uint32_t RESERVED3; /*!< Reserved, Address offset: 0x20 */
+ __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */
+ __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */
+ __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */
+ __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */
+ __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */
+ __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */
+ __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */
+ __IO uint32_t TAFCR; /*!< RTC tamper and alternate function configuration register, Address offset: 0x40 */
+ __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */
+ uint32_t RESERVED4; /*!< Reserved, Address offset: 0x48 */
+ uint32_t RESERVED5; /*!< Reserved, Address offset: 0x4C */
+ __IO uint32_t BKP0R; /*!< RTC backup register 0, Address offset: 0x50 */
+ __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */
+ __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */
+ __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */
+ __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */
+}RTC_TypeDef;
+
+/**
+ * @brief Serial Peripheral Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< SPI Control register 1 (not used in I2S mode), Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */
+ __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */
+ __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */
+ __IO uint32_t RXCRCR; /*!< SPI Rx CRC register (not used in I2S mode), Address offset: 0x14 */
+ __IO uint32_t TXCRCR; /*!< SPI Tx CRC register (not used in I2S mode), Address offset: 0x18 */
+ __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */
+ __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */
+}SPI_TypeDef;
+
+/**
+ * @brief TIM
+ */
+typedef struct
+{
+ __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */
+ __IO uint32_t SMCR; /*!< TIM slave Mode Control register, Address offset: 0x08 */
+ __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */
+ __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */
+ __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */
+ __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */
+ __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */
+ __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */
+ __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */
+ __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */
+ __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */
+ __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */
+ __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */
+ __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */
+ __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */
+ __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */
+ __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */
+ __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */
+ __IO uint32_t DMAR; /*!< TIM DMA address for full transfer register, Address offset: 0x4C */
+ __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */
+}TIM_TypeDef;
+
+/**
+ * @brief Touch Sensing Controller (TSC)
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< TSC control register, Address offset: 0x00 */
+ __IO uint32_t IER; /*!< TSC interrupt enable register, Address offset: 0x04 */
+ __IO uint32_t ICR; /*!< TSC interrupt clear register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< TSC interrupt status register, Address offset: 0x0C */
+ __IO uint32_t IOHCR; /*!< TSC I/O hysteresis control register, Address offset: 0x10 */
+ uint32_t RESERVED1; /*!< Reserved, Address offset: 0x14 */
+ __IO uint32_t IOASCR; /*!< TSC I/O analog switch control register, Address offset: 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, Address offset: 0x1C */
+ __IO uint32_t IOSCR; /*!< TSC I/O sampling control register, Address offset: 0x20 */
+ uint32_t RESERVED3; /*!< Reserved, Address offset: 0x24 */
+ __IO uint32_t IOCCR; /*!< TSC I/O channel control register, Address offset: 0x28 */
+ uint32_t RESERVED4; /*!< Reserved, Address offset: 0x2C */
+ __IO uint32_t IOGCSR; /*!< TSC I/O group control status register, Address offset: 0x30 */
+ __IO uint32_t IOGXCR[8]; /*!< TSC I/O group x counter register, Address offset: 0x34-50 */
+}TSC_TypeDef;
+
+/**
+ * @brief Universal Synchronous Asynchronous Receiver Transmitter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */
+ __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */
+ __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */
+ __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */
+ __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */
+ __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */
+ __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */
+ __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */
+ __IO uint16_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */
+ uint16_t RESERVED1; /*!< Reserved, 0x26 */
+ __IO uint16_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */
+ uint16_t RESERVED2; /*!< Reserved, 0x2A */
+}USART_TypeDef;
+
+/**
+ * @brief Window WATCHDOG
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */
+ __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */
+}WWDG_TypeDef;
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_memory_map
+ * @{
+ */
+
+#define FLASH_BASE ((uint32_t)0x08000000) /*!< FLASH base address in the alias region */
+#define SRAM_BASE ((uint32_t)0x20000000) /*!< SRAM base address in the alias region */
+#define PERIPH_BASE ((uint32_t)0x40000000) /*!< Peripheral base address in the alias region */
+
+/*!< Peripheral memory map */
+#define APBPERIPH_BASE PERIPH_BASE
+#define AHBPERIPH_BASE (PERIPH_BASE + 0x00020000)
+#define AHB2PERIPH_BASE (PERIPH_BASE + 0x08000000)
+
+#define TIM2_BASE (APBPERIPH_BASE + 0x00000000)
+#define TIM3_BASE (APBPERIPH_BASE + 0x00000400)
+#define TIM6_BASE (APBPERIPH_BASE + 0x00001000)
+#define TIM14_BASE (APBPERIPH_BASE + 0x00002000)
+#define RTC_BASE (APBPERIPH_BASE + 0x00002800)
+#define WWDG_BASE (APBPERIPH_BASE + 0x00002C00)
+#define IWDG_BASE (APBPERIPH_BASE + 0x00003000)
+#define SPI2_BASE (APBPERIPH_BASE + 0x00003800)
+#define USART2_BASE (APBPERIPH_BASE + 0x00004400)
+#define I2C1_BASE (APBPERIPH_BASE + 0x00005400)
+#define I2C2_BASE (APBPERIPH_BASE + 0x00005800)
+#define PWR_BASE (APBPERIPH_BASE + 0x00007000)
+#define DAC_BASE (APBPERIPH_BASE + 0x00007400)
+#define CEC_BASE (APBPERIPH_BASE + 0x00007800)
+
+#define SYSCFG_BASE (APBPERIPH_BASE + 0x00010000)
+#define COMP_BASE (APBPERIPH_BASE + 0x0001001C)
+#define EXTI_BASE (APBPERIPH_BASE + 0x00010400)
+#define ADC1_BASE (APBPERIPH_BASE + 0x00012400)
+#define ADC_BASE (APBPERIPH_BASE + 0x00012708)
+#define TIM1_BASE (APBPERIPH_BASE + 0x00012C00)
+#define SPI1_BASE (APBPERIPH_BASE + 0x00013000)
+#define USART1_BASE (APBPERIPH_BASE + 0x00013800)
+#define TIM15_BASE (APBPERIPH_BASE + 0x00014000)
+#define TIM16_BASE (APBPERIPH_BASE + 0x00014400)
+#define TIM17_BASE (APBPERIPH_BASE + 0x00014800)
+#define DBGMCU_BASE (APBPERIPH_BASE + 0x00015800)
+
+#define DMA1_BASE (AHBPERIPH_BASE + 0x00000000)
+#define DMA1_Channel1_BASE (DMA1_BASE + 0x00000008)
+#define DMA1_Channel2_BASE (DMA1_BASE + 0x0000001C)
+#define DMA1_Channel3_BASE (DMA1_BASE + 0x00000030)
+#define DMA1_Channel4_BASE (DMA1_BASE + 0x00000044)
+#define DMA1_Channel5_BASE (DMA1_BASE + 0x00000058)
+
+#define RCC_BASE (AHBPERIPH_BASE + 0x00001000)
+#define FLASH_R_BASE (AHBPERIPH_BASE + 0x00002000) /*!< FLASH registers base address */
+#define OB_BASE ((uint32_t)0x1FFFF800) /*!< FLASH Option Bytes base address */
+#define CRC_BASE (AHBPERIPH_BASE + 0x00003000)
+#define TSC_BASE (AHBPERIPH_BASE + 0x00004000)
+
+#define GPIOA_BASE (AHB2PERIPH_BASE + 0x00000000)
+#define GPIOB_BASE (AHB2PERIPH_BASE + 0x00000400)
+#define GPIOC_BASE (AHB2PERIPH_BASE + 0x00000800)
+#define GPIOD_BASE (AHB2PERIPH_BASE + 0x00000C00)
+#define GPIOF_BASE (AHB2PERIPH_BASE + 0x00001400)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_declaration
+ * @{
+ */
+
+#define TIM2 ((TIM_TypeDef *) TIM2_BASE)
+#define TIM3 ((TIM_TypeDef *) TIM3_BASE)
+#define TIM6 ((TIM_TypeDef *) TIM6_BASE)
+#define TIM14 ((TIM_TypeDef *) TIM14_BASE)
+#define RTC ((RTC_TypeDef *) RTC_BASE)
+#define WWDG ((WWDG_TypeDef *) WWDG_BASE)
+#define IWDG ((IWDG_TypeDef *) IWDG_BASE)
+#define SPI2 ((SPI_TypeDef *) SPI2_BASE)
+#define USART2 ((USART_TypeDef *) USART2_BASE)
+#define I2C1 ((I2C_TypeDef *) I2C1_BASE)
+#define I2C2 ((I2C_TypeDef *) I2C2_BASE)
+#define PWR ((PWR_TypeDef *) PWR_BASE)
+#define DAC ((DAC_TypeDef *) DAC_BASE)
+#define CEC ((CEC_TypeDef *) CEC_BASE)
+#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE)
+#define COMP ((COMP1_2_TypeDef *) COMP_BASE)
+#define COMP1 ((COMP_TypeDef *) COMP_BASE)
+#define COMP2 ((COMP_TypeDef *) (COMP_BASE + 0x00000002))
+#define EXTI ((EXTI_TypeDef *) EXTI_BASE)
+#define ADC1 ((ADC_TypeDef *) ADC1_BASE)
+#define ADC ((ADC_Common_TypeDef *) ADC_BASE)
+#define TIM1 ((TIM_TypeDef *) TIM1_BASE)
+#define SPI1 ((SPI_TypeDef *) SPI1_BASE)
+#define USART1 ((USART_TypeDef *) USART1_BASE)
+#define TIM15 ((TIM_TypeDef *) TIM15_BASE)
+#define TIM16 ((TIM_TypeDef *) TIM16_BASE)
+#define TIM17 ((TIM_TypeDef *) TIM17_BASE)
+#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE)
+#define DMA1 ((DMA_TypeDef *) DMA1_BASE)
+#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE)
+#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE)
+#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE)
+#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE)
+#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE)
+#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE)
+#define OB ((OB_TypeDef *) OB_BASE)
+#define RCC ((RCC_TypeDef *) RCC_BASE)
+#define CRC ((CRC_TypeDef *) CRC_BASE)
+#define TSC ((TSC_TypeDef *) TSC_BASE)
+#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE)
+#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE)
+#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE)
+#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE)
+#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_constants
+ * @{
+ */
+
+ /** @addtogroup Peripheral_Registers_Bits_Definition
+ * @{
+ */
+
+/******************************************************************************/
+/* Peripheral Registers Bits Definition */
+/******************************************************************************/
+/******************************************************************************/
+/* */
+/* Analog to Digital Converter (ADC) */
+/* */
+/******************************************************************************/
+/******************** Bits definition for ADC_ISR register ******************/
+#define ADC_ISR_AWD ((uint32_t)0x00000080) /*!< Analog watchdog flag */
+#define ADC_ISR_OVR ((uint32_t)0x00000010) /*!< Overrun flag */
+#define ADC_ISR_EOSEQ ((uint32_t)0x00000008) /*!< End of Sequence flag */
+#define ADC_ISR_EOC ((uint32_t)0x00000004) /*!< End of Conversion */
+#define ADC_ISR_EOSMP ((uint32_t)0x00000002) /*!< End of sampling flag */
+#define ADC_ISR_ADRDY ((uint32_t)0x00000001) /*!< ADC Ready */
+
+/* Old EOSEQ bit definition, maintained for legacy purpose */
+#define ADC_ISR_EOS ADC_ISR_EOSEQ
+
+/******************** Bits definition for ADC_IER register ******************/
+#define ADC_IER_AWDIE ((uint32_t)0x00000080) /*!< Analog Watchdog interrupt enable */
+#define ADC_IER_OVRIE ((uint32_t)0x00000010) /*!< Overrun interrupt enable */
+#define ADC_IER_EOSEQIE ((uint32_t)0x00000008) /*!< End of Sequence of conversion interrupt enable */
+#define ADC_IER_EOCIE ((uint32_t)0x00000004) /*!< End of Conversion interrupt enable */
+#define ADC_IER_EOSMPIE ((uint32_t)0x00000002) /*!< End of sampling interrupt enable */
+#define ADC_IER_ADRDYIE ((uint32_t)0x00000001) /*!< ADC Ready interrupt enable */
+
+/* Old EOSEQIE bit definition, maintained for legacy purpose */
+#define ADC_IER_EOSIE ADC_IER_EOSEQIE
+
+/******************** Bits definition for ADC_CR register *******************/
+#define ADC_CR_ADCAL ((uint32_t)0x80000000) /*!< ADC calibration */
+#define ADC_CR_ADSTP ((uint32_t)0x00000010) /*!< ADC stop of conversion command */
+#define ADC_CR_ADSTART ((uint32_t)0x00000004) /*!< ADC start of conversion */
+#define ADC_CR_ADDIS ((uint32_t)0x00000002) /*!< ADC disable command */
+#define ADC_CR_ADEN ((uint32_t)0x00000001) /*!< ADC enable control */
+
+/******************* Bits definition for ADC_CFGR1 register *****************/
+#define ADC_CFGR1_AWDCH ((uint32_t)0x7C000000) /*!< AWDCH[4:0] bits (Analog watchdog channel select bits) */
+#define ADC_CFGR1_AWDCH_0 ((uint32_t)0x04000000) /*!< Bit 0 */
+#define ADC_CFGR1_AWDCH_1 ((uint32_t)0x08000000) /*!< Bit 1 */
+#define ADC_CFGR1_AWDCH_2 ((uint32_t)0x10000000) /*!< Bit 2 */
+#define ADC_CFGR1_AWDCH_3 ((uint32_t)0x20000000) /*!< Bit 3 */
+#define ADC_CFGR1_AWDCH_4 ((uint32_t)0x40000000) /*!< Bit 4 */
+#define ADC_CFGR1_AWDEN ((uint32_t)0x00800000) /*!< Analog watchdog enable on regular channels */
+#define ADC_CFGR1_AWDSGL ((uint32_t)0x00400000) /*!< Enable the watchdog on a single channel or on all channels */
+#define ADC_CFGR1_DISCEN ((uint32_t)0x00010000) /*!< Discontinuous mode on regular channels */
+#define ADC_CFGR1_AUTOFF ((uint32_t)0x00008000) /*!< ADC auto power off */
+#define ADC_CFGR1_WAIT ((uint32_t)0x00004000) /*!< ADC wait conversion mode */
+#define ADC_CFGR1_CONT ((uint32_t)0x00002000) /*!< Continuous Conversion */
+#define ADC_CFGR1_OVRMOD ((uint32_t)0x00001000) /*!< Overrun mode */
+#define ADC_CFGR1_EXTEN ((uint32_t)0x00000C00) /*!< EXTEN[1:0] bits (External Trigger Conversion mode for regular channels) */
+#define ADC_CFGR1_EXTEN_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define ADC_CFGR1_EXTEN_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define ADC_CFGR1_EXTSEL ((uint32_t)0x000001C0) /*!< EXTSEL[2:0] bits (External Event Select for regular group) */
+#define ADC_CFGR1_EXTSEL_0 ((uint32_t)0x00000040) /*!< Bit 0 */
+#define ADC_CFGR1_EXTSEL_1 ((uint32_t)0x00000080) /*!< Bit 1 */
+#define ADC_CFGR1_EXTSEL_2 ((uint32_t)0x00000100) /*!< Bit 2 */
+#define ADC_CFGR1_ALIGN ((uint32_t)0x00000020) /*!< Data Alignment */
+#define ADC_CFGR1_RES ((uint32_t)0x00000018) /*!< RES[1:0] bits (Resolution) */
+#define ADC_CFGR1_RES_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define ADC_CFGR1_RES_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define ADC_CFGR1_SCANDIR ((uint32_t)0x00000004) /*!< Sequence scan direction */
+#define ADC_CFGR1_DMACFG ((uint32_t)0x00000002) /*!< Direct memory access configuration */
+#define ADC_CFGR1_DMAEN ((uint32_t)0x00000001) /*!< Direct memory access enable */
+
+/* Old WAIT bit definition, maintained for legacy purpose */
+#define ADC_CFGR1_AUTDLY ADC_CFGR1_WAIT
+
+/******************* Bits definition for ADC_CFGR2 register *****************/
+#define ADC_CFGR2_CKMODE ((uint32_t)0xC0000000) /*!< ADC clock mode */
+#define ADC_CFGR2_CKMODE_1 ((uint32_t)0x80000000) /*!< ADC clocked by PCLK div4 */
+#define ADC_CFGR2_CKMODE_0 ((uint32_t)0x40000000) /*!< ADC clocked by PCLK div2 */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_CFGR2_JITOFFDIV4 ADC_CFGR2_CKMODE_1 /*!< ADC clocked by PCLK div4 */
+#define ADC_CFGR2_JITOFFDIV2 ADC_CFGR2_CKMODE_0 /*!< ADC clocked by PCLK div2 */
+
+/****************** Bit definition for ADC_SMPR register ********************/
+#define ADC_SMPR_SMP ((uint32_t)0x00000007) /*!< SMP[2:0] bits (Sampling time selection) */
+#define ADC_SMPR_SMP_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define ADC_SMPR_SMP_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define ADC_SMPR_SMP_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_SMPR1_SMPR ADC_SMPR_SMP /*!< SMP[2:0] bits (Sampling time selection) */
+#define ADC_SMPR1_SMPR_0 ADC_SMPR_SMP_0 /*!< Bit 0 */
+#define ADC_SMPR1_SMPR_1 ADC_SMPR_SMP_1 /*!< Bit 1 */
+#define ADC_SMPR1_SMPR_2 ADC_SMPR_SMP_2 /*!< Bit 2 */
+
+/******************* Bit definition for ADC_TR register ********************/
+#define ADC_TR_HT ((uint32_t)0x0FFF0000) /*!< Analog watchdog high threshold */
+#define ADC_TR_LT ((uint32_t)0x00000FFF) /*!< Analog watchdog low threshold */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_HTR_HT ADC_TR_HT /*!< Analog watchdog high threshold */
+#define ADC_LTR_LT ADC_TR_LT /*!< Analog watchdog low threshold */
+
+/****************** Bit definition for ADC_CHSELR register ******************/
+#define ADC_CHSELR_CHSEL18 ((uint32_t)0x00040000) /*!< Channel 18 selection */
+#define ADC_CHSELR_CHSEL17 ((uint32_t)0x00020000) /*!< Channel 17 selection */
+#define ADC_CHSELR_CHSEL16 ((uint32_t)0x00010000) /*!< Channel 16 selection */
+#define ADC_CHSELR_CHSEL15 ((uint32_t)0x00008000) /*!< Channel 15 selection */
+#define ADC_CHSELR_CHSEL14 ((uint32_t)0x00004000) /*!< Channel 14 selection */
+#define ADC_CHSELR_CHSEL13 ((uint32_t)0x00002000) /*!< Channel 13 selection */
+#define ADC_CHSELR_CHSEL12 ((uint32_t)0x00001000) /*!< Channel 12 selection */
+#define ADC_CHSELR_CHSEL11 ((uint32_t)0x00000800) /*!< Channel 11 selection */
+#define ADC_CHSELR_CHSEL10 ((uint32_t)0x00000400) /*!< Channel 10 selection */
+#define ADC_CHSELR_CHSEL9 ((uint32_t)0x00000200) /*!< Channel 9 selection */
+#define ADC_CHSELR_CHSEL8 ((uint32_t)0x00000100) /*!< Channel 8 selection */
+#define ADC_CHSELR_CHSEL7 ((uint32_t)0x00000080) /*!< Channel 7 selection */
+#define ADC_CHSELR_CHSEL6 ((uint32_t)0x00000040) /*!< Channel 6 selection */
+#define ADC_CHSELR_CHSEL5 ((uint32_t)0x00000020) /*!< Channel 5 selection */
+#define ADC_CHSELR_CHSEL4 ((uint32_t)0x00000010) /*!< Channel 4 selection */
+#define ADC_CHSELR_CHSEL3 ((uint32_t)0x00000008) /*!< Channel 3 selection */
+#define ADC_CHSELR_CHSEL2 ((uint32_t)0x00000004) /*!< Channel 2 selection */
+#define ADC_CHSELR_CHSEL1 ((uint32_t)0x00000002) /*!< Channel 1 selection */
+#define ADC_CHSELR_CHSEL0 ((uint32_t)0x00000001) /*!< Channel 0 selection */
+
+/******************** Bit definition for ADC_DR register ********************/
+#define ADC_DR_DATA ((uint32_t)0x0000FFFF) /*!< Regular data */
+
+/******************* Bit definition for ADC_CCR register ********************/
+#define ADC_CCR_VBATEN ((uint32_t)0x01000000) /*!< Voltage battery enable */
+#define ADC_CCR_TSEN ((uint32_t)0x00800000) /*!< Tempurature sensore enable */
+#define ADC_CCR_VREFEN ((uint32_t)0x00400000) /*!< Vrefint enable */
+
+
+/******************************************************************************/
+/* */
+/* HDMI-CEC (CEC) */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for CEC_CR register *********************/
+#define CEC_CR_CECEN ((uint32_t)0x00000001) /*!< CEC Enable */
+#define CEC_CR_TXSOM ((uint32_t)0x00000002) /*!< CEC Tx Start Of Message */
+#define CEC_CR_TXEOM ((uint32_t)0x00000004) /*!< CEC Tx End Of Message */
+
+/******************* Bit definition for CEC_CFGR register *******************/
+#define CEC_CFGR_SFT ((uint32_t)0x00000007) /*!< CEC Signal Free Time */
+#define CEC_CFGR_RXTOL ((uint32_t)0x00000008) /*!< CEC Tolerance */
+#define CEC_CFGR_BRESTP ((uint32_t)0x00000010) /*!< CEC Rx Stop */
+#define CEC_CFGR_BREGEN ((uint32_t)0x00000020) /*!< CEC Bit Rising Error generation */
+#define CEC_CFGR_LBPEGEN ((uint32_t)0x00000040) /*!< CEC Long Bit Period Error gener. */
+#define CEC_CFGR_BRDNOGEN ((uint32_t)0x00000080) /*!< CEC Broadcast No Error generation */
+#define CEC_CFGR_SFTOPT ((uint32_t)0x00000100) /*!< CEC Signal Free Time optional */
+#define CEC_CFGR_OAR ((uint32_t)0x7FFF0000) /*!< CEC Own Address */
+#define CEC_CFGR_LSTN ((uint32_t)0x80000000) /*!< CEC Listen mode */
+
+/******************* Bit definition for CEC_TXDR register *******************/
+#define CEC_TXDR_TXD ((uint32_t)0x000000FF) /*!< CEC Tx Data */
+
+/******************* Bit definition for CEC_RXDR register *******************/
+#define CEC_TXDR_RXD ((uint32_t)0x000000FF) /*!< CEC Rx Data */
+
+/******************* Bit definition for CEC_ISR register ********************/
+#define CEC_ISR_RXBR ((uint32_t)0x00000001) /*!< CEC Rx-Byte Received */
+#define CEC_ISR_RXEND ((uint32_t)0x00000002) /*!< CEC End Of Reception */
+#define CEC_ISR_RXOVR ((uint32_t)0x00000004) /*!< CEC Rx-Overrun */
+#define CEC_ISR_BRE ((uint32_t)0x00000008) /*!< CEC Rx Bit Rising Error */
+#define CEC_ISR_SBPE ((uint32_t)0x00000010) /*!< CEC Rx Short Bit period Error */
+#define CEC_ISR_LBPE ((uint32_t)0x00000020) /*!< CEC Rx Long Bit period Error */
+#define CEC_ISR_RXACKE ((uint32_t)0x00000040) /*!< CEC Rx Missing Acknowledge */
+#define CEC_ISR_ARBLST ((uint32_t)0x00000080) /*!< CEC Arbitration Lost */
+#define CEC_ISR_TXBR ((uint32_t)0x00000100) /*!< CEC Tx Byte Request */
+#define CEC_ISR_TXEND ((uint32_t)0x00000200) /*!< CEC End of Transmission */
+#define CEC_ISR_TXUDR ((uint32_t)0x00000400) /*!< CEC Tx-Buffer Underrun */
+#define CEC_ISR_TXERR ((uint32_t)0x00000800) /*!< CEC Tx-Error */
+#define CEC_ISR_TXACKE ((uint32_t)0x00001000) /*!< CEC Tx Missing Acknowledge */
+
+/******************* Bit definition for CEC_IER register ********************/
+#define CEC_IER_RXBRIE ((uint32_t)0x00000001) /*!< CEC Rx-Byte Received IT Enable */
+#define CEC_IER_RXENDIE ((uint32_t)0x00000002) /*!< CEC End Of Reception IT Enable */
+#define CEC_IER_RXOVRIE ((uint32_t)0x00000004) /*!< CEC Rx-Overrun IT Enable */
+#define CEC_IER_BREIE ((uint32_t)0x00000008) /*!< CEC Rx Bit Rising Error IT Enable */
+#define CEC_IER_SBPEIE ((uint32_t)0x00000010) /*!< CEC Rx Short Bit period Error IT Enable*/
+#define CEC_IER_LBPEIE ((uint32_t)0x00000020) /*!< CEC Rx Long Bit period Error IT Enable */
+#define CEC_IER_RXACKEIE ((uint32_t)0x00000040) /*!< CEC Rx Missing Acknowledge IT Enable */
+#define CEC_IER_ARBLSTIE ((uint32_t)0x00000080) /*!< CEC Arbitration Lost IT Enable */
+#define CEC_IER_TXBRIE ((uint32_t)0x00000100) /*!< CEC Tx Byte Request IT Enable */
+#define CEC_IER_TXENDIE ((uint32_t)0x00000200) /*!< CEC End of Transmission IT Enable */
+#define CEC_IER_TXUDRIE ((uint32_t)0x00000400) /*!< CEC Tx-Buffer Underrun IT Enable */
+#define CEC_IER_TXERRIE ((uint32_t)0x00000800) /*!< CEC Tx-Error IT Enable */
+#define CEC_IER_TXACKEIE ((uint32_t)0x00001000) /*!< CEC Tx Missing Acknowledge IT Enable */
+
+
+/******************************************************************************/
+/* */
+/* Analog Comparators (COMP) */
+/* */
+/******************************************************************************/
+/*********************** Bit definition for COMP_CSR register ***************/
+/* COMP1 bits definition */
+#define COMP_CSR_COMP1EN ((uint32_t)0x00000001) /*!< COMP1 enable */
+#define COMP_CSR_COMP1SW1 ((uint32_t)0x00000002) /*!< SW1 switch control */
+#define COMP_CSR_COMP1MODE ((uint32_t)0x0000000C) /*!< COMP1 power mode */
+#define COMP_CSR_COMP1MODE_0 ((uint32_t)0x00000004) /*!< COMP1 power mode bit 0 */
+#define COMP_CSR_COMP1MODE_1 ((uint32_t)0x00000008) /*!< COMP1 power mode bit 1 */
+#define COMP_CSR_COMP1INSEL ((uint32_t)0x00000070) /*!< COMP1 inverting input select */
+#define COMP_CSR_COMP1INSEL_0 ((uint32_t)0x00000010) /*!< COMP1 inverting input select bit 0 */
+#define COMP_CSR_COMP1INSEL_1 ((uint32_t)0x00000020) /*!< COMP1 inverting input select bit 1 */
+#define COMP_CSR_COMP1INSEL_2 ((uint32_t)0x00000040) /*!< COMP1 inverting input select bit 2 */
+#define COMP_CSR_COMP1OUTSEL ((uint32_t)0x00000700) /*!< COMP1 output select */
+#define COMP_CSR_COMP1OUTSEL_0 ((uint32_t)0x00000100) /*!< COMP1 output select bit 0 */
+#define COMP_CSR_COMP1OUTSEL_1 ((uint32_t)0x00000200) /*!< COMP1 output select bit 1 */
+#define COMP_CSR_COMP1OUTSEL_2 ((uint32_t)0x00000400) /*!< COMP1 output select bit 2 */
+#define COMP_CSR_COMP1POL ((uint32_t)0x00000800) /*!< COMP1 output polarity */
+#define COMP_CSR_COMP1HYST ((uint32_t)0x00003000) /*!< COMP1 hysteresis */
+#define COMP_CSR_COMP1HYST_0 ((uint32_t)0x00001000) /*!< COMP1 hysteresis bit 0 */
+#define COMP_CSR_COMP1HYST_1 ((uint32_t)0x00002000) /*!< COMP1 hysteresis bit 1 */
+#define COMP_CSR_COMP1OUT ((uint32_t)0x00004000) /*!< COMP1 output level */
+#define COMP_CSR_COMP1LOCK ((uint32_t)0x00008000) /*!< COMP1 lock */
+/* COMP2 bits definition */
+#define COMP_CSR_COMP2EN ((uint32_t)0x00010000) /*!< COMP2 enable */
+#define COMP_CSR_COMP2MODE ((uint32_t)0x000C0000) /*!< COMP2 power mode */
+#define COMP_CSR_COMP2MODE_0 ((uint32_t)0x00040000) /*!< COMP2 power mode bit 0 */
+#define COMP_CSR_COMP2MODE_1 ((uint32_t)0x00080000) /*!< COMP2 power mode bit 1 */
+#define COMP_CSR_COMP2INSEL ((uint32_t)0x00700000) /*!< COMP2 inverting input select */
+#define COMP_CSR_COMP2INSEL_0 ((uint32_t)0x00100000) /*!< COMP2 inverting input select bit 0 */
+#define COMP_CSR_COMP2INSEL_1 ((uint32_t)0x00200000) /*!< COMP2 inverting input select bit 1 */
+#define COMP_CSR_COMP2INSEL_2 ((uint32_t)0x00400000) /*!< COMP2 inverting input select bit 2 */
+#define COMP_CSR_WNDWEN ((uint32_t)0x00800000) /*!< Comparators window mode enable */
+#define COMP_CSR_COMP2OUTSEL ((uint32_t)0x07000000) /*!< COMP2 output select */
+#define COMP_CSR_COMP2OUTSEL_0 ((uint32_t)0x01000000) /*!< COMP2 output select bit 0 */
+#define COMP_CSR_COMP2OUTSEL_1 ((uint32_t)0x02000000) /*!< COMP2 output select bit 1 */
+#define COMP_CSR_COMP2OUTSEL_2 ((uint32_t)0x04000000) /*!< COMP2 output select bit 2 */
+#define COMP_CSR_COMP2POL ((uint32_t)0x08000000) /*!< COMP2 output polarity */
+#define COMP_CSR_COMP2HYST ((uint32_t)0x30000000) /*!< COMP2 hysteresis */
+#define COMP_CSR_COMP2HYST_0 ((uint32_t)0x10000000) /*!< COMP2 hysteresis bit 0 */
+#define COMP_CSR_COMP2HYST_1 ((uint32_t)0x20000000) /*!< COMP2 hysteresis bit 1 */
+#define COMP_CSR_COMP2OUT ((uint32_t)0x40000000) /*!< COMP2 output level */
+#define COMP_CSR_COMP2LOCK ((uint32_t)0x80000000) /*!< COMP2 lock */
+/* COMPx bits definition */
+#define COMP_CSR_COMPxEN ((uint16_t)0x0001) /*!< COMPx enable */
+#define COMP_CSR_COMPxMODE ((uint16_t)0x000C) /*!< COMPx power mode */
+#define COMP_CSR_COMPxMODE_0 ((uint16_t)0x0004) /*!< COMPx power mode bit 0 */
+#define COMP_CSR_COMPxMODE_1 ((uint16_t)0x0008) /*!< COMPx power mode bit 1 */
+#define COMP_CSR_COMPxINSEL ((uint16_t)0x0070) /*!< COMPx inverting input select */
+#define COMP_CSR_COMPxINSEL_0 ((uint16_t)0x0010) /*!< COMPx inverting input select bit 0 */
+#define COMP_CSR_COMPxINSEL_1 ((uint16_t)0x0020) /*!< COMPx inverting input select bit 1 */
+#define COMP_CSR_COMPxINSEL_2 ((uint16_t)0x0040) /*!< COMPx inverting input select bit 2 */
+#define COMP_CSR_COMPxOUTSEL ((uint16_t)0x0700) /*!< COMPx output select */
+#define COMP_CSR_COMPxOUTSEL_0 ((uint16_t)0x0100) /*!< COMPx output select bit 0 */
+#define COMP_CSR_COMPxOUTSEL_1 ((uint16_t)0x0200) /*!< COMPx output select bit 1 */
+#define COMP_CSR_COMPxOUTSEL_2 ((uint16_t)0x0400) /*!< COMPx output select bit 2 */
+#define COMP_CSR_COMPxPOL ((uint16_t)0x0800) /*!< COMPx output polarity */
+#define COMP_CSR_COMPxHYST ((uint16_t)0x3000) /*!< COMPx hysteresis */
+#define COMP_CSR_COMPxHYST_0 ((uint16_t)0x1000) /*!< COMPx hysteresis bit 0 */
+#define COMP_CSR_COMPxHYST_1 ((uint16_t)0x2000) /*!< COMPx hysteresis bit 1 */
+#define COMP_CSR_COMPxOUT ((uint16_t)0x4000) /*!< COMPx output level */
+#define COMP_CSR_COMPxLOCK ((uint16_t)0x8000) /*!< COMPx lock */
+
+/******************************************************************************/
+/* */
+/* CRC calculation unit (CRC) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for CRC_DR register *********************/
+#define CRC_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data register bits */
+
+/******************* Bit definition for CRC_IDR register ********************/
+#define CRC_IDR_IDR ((uint8_t)0xFF) /*!< General-purpose 8-bit data register bits */
+
+/******************** Bit definition for CRC_CR register ********************/
+#define CRC_CR_RESET ((uint32_t)0x00000001) /*!< RESET the CRC computation unit bit */
+#define CRC_CR_REV_IN ((uint32_t)0x00000060) /*!< REV_IN Reverse Input Data bits */
+#define CRC_CR_REV_IN_0 ((uint32_t)0x00000020) /*!< REV_IN Bit 0 */
+#define CRC_CR_REV_IN_1 ((uint32_t)0x00000040) /*!< REV_IN Bit 1 */
+#define CRC_CR_REV_OUT ((uint32_t)0x00000080) /*!< REV_OUT Reverse Output Data bits */
+
+/******************* Bit definition for CRC_INIT register *******************/
+#define CRC_INIT_INIT ((uint32_t)0xFFFFFFFF) /*!< Initial CRC value bits */
+
+
+/******************************************************************************/
+/* */
+/* Digital to Analog Converter (DAC) */
+/* */
+/******************************************************************************/
+/******************** Bit definition for DAC_CR register ********************/
+#define DAC_CR_EN1 ((uint32_t)0x00000001) /*!< DAC channel1 enable */
+#define DAC_CR_BOFF1 ((uint32_t)0x00000002) /*!< DAC channel1 output buffer disable */
+#define DAC_CR_TEN1 ((uint32_t)0x00000004) /*!< DAC channel1 Trigger enable */
+
+#define DAC_CR_TSEL1 ((uint32_t)0x00000038) /*!< TSEL1[2:0] (DAC channel1 Trigger selection) */
+#define DAC_CR_TSEL1_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define DAC_CR_TSEL1_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define DAC_CR_TSEL1_2 ((uint32_t)0x00000020) /*!< Bit 2 */
+
+#define DAC_CR_DMAEN1 ((uint32_t)0x00001000) /*!< DAC channel1 DMA enable */
+#define DAC_CR_DMAUDRIE1 ((uint32_t)0x00002000) /*!< DAC channel1 DMA Underrun Interrupt enable */
+
+
+/***************** Bit definition for DAC_SWTRIGR register ******************/
+#define DAC_SWTRIGR_SWTRIG1 ((uint32_t)0x00000001) /*!< DAC channel1 software trigger */
+
+/***************** Bit definition for DAC_DHR12R1 register ******************/
+#define DAC_DHR12R1_DACC1DHR ((uint32_t)0x00000FFF) /*!< DAC channel1 12-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12L1 register ******************/
+#define DAC_DHR12L1_DACC1DHR ((uint32_t)0x0000FFF0) /*!< DAC channel1 12-bit Left aligned data */
+
+/****************** Bit definition for DAC_DHR8R1 register ******************/
+#define DAC_DHR8R1_DACC1DHR ((uint32_t)0x000000FF) /*!< DAC channel1 8-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12RD register ******************/
+#define DAC_DHR12RD_DACC1DHR ((uint32_t)0x00000FFF) /*!< DAC channel1 12-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12LD register ******************/
+#define DAC_DHR12LD_DACC1DHR ((uint32_t)0x0000FFF0) /*!< DAC channel1 12-bit Left aligned data */
+
+/****************** Bit definition for DAC_DHR8RD register ******************/
+#define DAC_DHR8RD_DACC1DHR ((uint32_t)0x000000FF) /*!< DAC channel1 8-bit Right aligned data */
+
+/******************* Bit definition for DAC_DOR1 register *******************/
+#define DAC_DOR1_DACC1DOR ((uint32_t)0x00000FFF) /*!< DAC channel1 data output */
+
+/******************** Bit definition for DAC_SR register ********************/
+#define DAC_SR_DMAUDR1 ((uint32_t)0x00002000) /*!< DAC channel1 DMA underrun flag */
+
+
+/******************************************************************************/
+/* */
+/* Debug MCU (DBGMCU) */
+/* */
+/******************************************************************************/
+
+/**************** Bit definition for DBGMCU_IDCODE register *****************/
+#define DBGMCU_IDCODE_DEV_ID ((uint32_t)0x00000FFF) /*!< Device Identifier */
+
+#define DBGMCU_IDCODE_REV_ID ((uint32_t)0xFFFF0000) /*!< REV_ID[15:0] bits (Revision Identifier) */
+#define DBGMCU_IDCODE_REV_ID_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define DBGMCU_IDCODE_REV_ID_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define DBGMCU_IDCODE_REV_ID_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define DBGMCU_IDCODE_REV_ID_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+#define DBGMCU_IDCODE_REV_ID_4 ((uint32_t)0x00100000) /*!< Bit 4 */
+#define DBGMCU_IDCODE_REV_ID_5 ((uint32_t)0x00200000) /*!< Bit 5 */
+#define DBGMCU_IDCODE_REV_ID_6 ((uint32_t)0x00400000) /*!< Bit 6 */
+#define DBGMCU_IDCODE_REV_ID_7 ((uint32_t)0x00800000) /*!< Bit 7 */
+#define DBGMCU_IDCODE_REV_ID_8 ((uint32_t)0x01000000) /*!< Bit 8 */
+#define DBGMCU_IDCODE_REV_ID_9 ((uint32_t)0x02000000) /*!< Bit 9 */
+#define DBGMCU_IDCODE_REV_ID_10 ((uint32_t)0x04000000) /*!< Bit 10 */
+#define DBGMCU_IDCODE_REV_ID_11 ((uint32_t)0x08000000) /*!< Bit 11 */
+#define DBGMCU_IDCODE_REV_ID_12 ((uint32_t)0x10000000) /*!< Bit 12 */
+#define DBGMCU_IDCODE_REV_ID_13 ((uint32_t)0x20000000) /*!< Bit 13 */
+#define DBGMCU_IDCODE_REV_ID_14 ((uint32_t)0x40000000) /*!< Bit 14 */
+#define DBGMCU_IDCODE_REV_ID_15 ((uint32_t)0x80000000) /*!< Bit 15 */
+
+/****************** Bit definition for DBGMCU_CR register *******************/
+#define DBGMCU_CR_DBG_STOP ((uint32_t)0x00000002) /*!< Debug Stop Mode */
+#define DBGMCU_CR_DBG_STANDBY ((uint32_t)0x00000004) /*!< Debug Standby mode */
+
+/****************** Bit definition for DBGMCU_APB1_FZ register **************/
+#define DBGMCU_APB1_FZ_DBG_TIM2_STOP ((uint32_t)0x00000001) /*!< TIM2 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM3_STOP ((uint32_t)0x00000002) /*!< TIM3 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM6_STOP ((uint32_t)0x00000010) /*!< TIM6 counter stopped when core is halted (not available on STM32F042 devices)*/
+#define DBGMCU_APB1_FZ_DBG_TIM14_STOP ((uint32_t)0x00000100) /*!< TIM14 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_RTC_STOP ((uint32_t)0x00000400) /*!< RTC Calendar frozen when core is halted */
+#define DBGMCU_APB1_FZ_DBG_WWDG_STOP ((uint32_t)0x00000800) /*!< Debug Window Watchdog stopped when Core is halted */
+#define DBGMCU_APB1_FZ_DBG_IWDG_STOP ((uint32_t)0x00001000) /*!< Debug Independent Watchdog stopped when Core is halted */
+#define DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00200000) /*!< I2C1 SMBUS timeout mode stopped when Core is halted */
+
+/****************** Bit definition for DBGMCU_APB2_FZ register **************/
+#define DBGMCU_APB2_FZ_DBG_TIM1_STOP ((uint32_t)0x00000800) /*!< TIM1 counter stopped when core is halted */
+#define DBGMCU_APB2_FZ_DBG_TIM15_STOP ((uint32_t)0x00010000) /*!< TIM15 counter stopped when core is halted (not available on STM32F042 devices) */
+#define DBGMCU_APB2_FZ_DBG_TIM16_STOP ((uint32_t)0x00020000) /*!< TIM16 counter stopped when core is halted */
+#define DBGMCU_APB2_FZ_DBG_TIM17_STOP ((uint32_t)0x00040000) /*!< TIM17 counter stopped when core is halted */
+
+/******************************************************************************/
+/* */
+/* DMA Controller (DMA) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for DMA_ISR register ********************/
+#define DMA_ISR_GIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt flag */
+#define DMA_ISR_TCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete flag */
+#define DMA_ISR_HTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer flag */
+#define DMA_ISR_TEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error flag */
+#define DMA_ISR_GIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt flag */
+#define DMA_ISR_TCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete flag */
+#define DMA_ISR_HTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer flag */
+#define DMA_ISR_TEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error flag */
+#define DMA_ISR_GIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt flag */
+#define DMA_ISR_TCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete flag */
+#define DMA_ISR_HTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer flag */
+#define DMA_ISR_TEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error flag */
+#define DMA_ISR_GIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt flag */
+#define DMA_ISR_TCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete flag */
+#define DMA_ISR_HTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer flag */
+#define DMA_ISR_TEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error flag */
+#define DMA_ISR_GIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt flag */
+#define DMA_ISR_TCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete flag */
+#define DMA_ISR_HTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer flag */
+#define DMA_ISR_TEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error flag */
+
+/******************* Bit definition for DMA_IFCR register *******************/
+#define DMA_IFCR_CGIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt clear */
+#define DMA_IFCR_CTCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete clear */
+#define DMA_IFCR_CHTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer clear */
+#define DMA_IFCR_CTEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error clear */
+#define DMA_IFCR_CGIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt clear */
+#define DMA_IFCR_CTCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete clear */
+#define DMA_IFCR_CHTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer clear */
+#define DMA_IFCR_CTEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error clear */
+#define DMA_IFCR_CGIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt clear */
+#define DMA_IFCR_CTCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete clear */
+#define DMA_IFCR_CHTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer clear */
+#define DMA_IFCR_CTEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error clear */
+#define DMA_IFCR_CGIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt clear */
+#define DMA_IFCR_CTCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete clear */
+#define DMA_IFCR_CHTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer clear */
+#define DMA_IFCR_CTEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error clear */
+#define DMA_IFCR_CGIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt clear */
+#define DMA_IFCR_CTCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete clear */
+#define DMA_IFCR_CHTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer clear */
+#define DMA_IFCR_CTEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error clear */
+
+/******************* Bit definition for DMA_CCR register ********************/
+#define DMA_CCR_EN ((uint32_t)0x00000001) /*!< Channel enable */
+#define DMA_CCR_TCIE ((uint32_t)0x00000002) /*!< Transfer complete interrupt enable */
+#define DMA_CCR_HTIE ((uint32_t)0x00000004) /*!< Half Transfer interrupt enable */
+#define DMA_CCR_TEIE ((uint32_t)0x00000008) /*!< Transfer error interrupt enable */
+#define DMA_CCR_DIR ((uint32_t)0x00000010) /*!< Data transfer direction */
+#define DMA_CCR_CIRC ((uint32_t)0x00000020) /*!< Circular mode */
+#define DMA_CCR_PINC ((uint32_t)0x00000040) /*!< Peripheral increment mode */
+#define DMA_CCR_MINC ((uint32_t)0x00000080) /*!< Memory increment mode */
+
+#define DMA_CCR_PSIZE ((uint32_t)0x00000300) /*!< PSIZE[1:0] bits (Peripheral size) */
+#define DMA_CCR_PSIZE_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define DMA_CCR_PSIZE_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+
+#define DMA_CCR_MSIZE ((uint32_t)0x00000C00) /*!< MSIZE[1:0] bits (Memory size) */
+#define DMA_CCR_MSIZE_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define DMA_CCR_MSIZE_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+
+#define DMA_CCR_PL ((uint32_t)0x00003000) /*!< PL[1:0] bits(Channel Priority level)*/
+#define DMA_CCR_PL_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define DMA_CCR_PL_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+
+#define DMA_CCR_MEM2MEM ((uint32_t)0x00004000) /*!< Memory to memory mode */
+
+/****************** Bit definition for DMA_CNDTR register *******************/
+#define DMA_CNDTR_NDT ((uint32_t)0x0000FFFF) /*!< Number of data to Transfer */
+
+/****************** Bit definition for DMA_CPAR register ********************/
+#define DMA_CPAR_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */
+
+/****************** Bit definition for DMA_CMAR register ********************/
+#define DMA_CMAR_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */
+
+/******************************************************************************/
+/* */
+/* External Interrupt/Event Controller (EXTI) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for EXTI_IMR register *******************/
+#define EXTI_IMR_MR0 ((uint32_t)0x00000001) /*!< Interrupt Mask on line 0 */
+#define EXTI_IMR_MR1 ((uint32_t)0x00000002) /*!< Interrupt Mask on line 1 */
+#define EXTI_IMR_MR2 ((uint32_t)0x00000004) /*!< Interrupt Mask on line 2 */
+#define EXTI_IMR_MR3 ((uint32_t)0x00000008) /*!< Interrupt Mask on line 3 */
+#define EXTI_IMR_MR4 ((uint32_t)0x00000010) /*!< Interrupt Mask on line 4 */
+#define EXTI_IMR_MR5 ((uint32_t)0x00000020) /*!< Interrupt Mask on line 5 */
+#define EXTI_IMR_MR6 ((uint32_t)0x00000040) /*!< Interrupt Mask on line 6 */
+#define EXTI_IMR_MR7 ((uint32_t)0x00000080) /*!< Interrupt Mask on line 7 */
+#define EXTI_IMR_MR8 ((uint32_t)0x00000100) /*!< Interrupt Mask on line 8 */
+#define EXTI_IMR_MR9 ((uint32_t)0x00000200) /*!< Interrupt Mask on line 9 */
+#define EXTI_IMR_MR10 ((uint32_t)0x00000400) /*!< Interrupt Mask on line 10 */
+#define EXTI_IMR_MR11 ((uint32_t)0x00000800) /*!< Interrupt Mask on line 11 */
+#define EXTI_IMR_MR12 ((uint32_t)0x00001000) /*!< Interrupt Mask on line 12 */
+#define EXTI_IMR_MR13 ((uint32_t)0x00002000) /*!< Interrupt Mask on line 13 */
+#define EXTI_IMR_MR14 ((uint32_t)0x00004000) /*!< Interrupt Mask on line 14 */
+#define EXTI_IMR_MR15 ((uint32_t)0x00008000) /*!< Interrupt Mask on line 15 */
+#define EXTI_IMR_MR16 ((uint32_t)0x00010000) /*!< Interrupt Mask on line 16 */
+#define EXTI_IMR_MR17 ((uint32_t)0x00020000) /*!< Interrupt Mask on line 17 */
+#define EXTI_IMR_MR19 ((uint32_t)0x00080000) /*!< Interrupt Mask on line 19 */
+#define EXTI_IMR_MR21 ((uint32_t)0x00200000) /*!< Interrupt Mask on line 21 */
+#define EXTI_IMR_MR22 ((uint32_t)0x00400000) /*!< Interrupt Mask on line 22 */
+#define EXTI_IMR_MR23 ((uint32_t)0x00800000) /*!< Interrupt Mask on line 23 */
+#define EXTI_IMR_MR25 ((uint32_t)0x02000000) /*!< Interrupt Mask on line 25 */
+#define EXTI_IMR_MR27 ((uint32_t)0x08000000) /*!< Interrupt Mask on line 27 */
+
+/****************** Bit definition for EXTI_EMR register ********************/
+#define EXTI_EMR_MR0 ((uint32_t)0x00000001) /*!< Event Mask on line 0 */
+#define EXTI_EMR_MR1 ((uint32_t)0x00000002) /*!< Event Mask on line 1 */
+#define EXTI_EMR_MR2 ((uint32_t)0x00000004) /*!< Event Mask on line 2 */
+#define EXTI_EMR_MR3 ((uint32_t)0x00000008) /*!< Event Mask on line 3 */
+#define EXTI_EMR_MR4 ((uint32_t)0x00000010) /*!< Event Mask on line 4 */
+#define EXTI_EMR_MR5 ((uint32_t)0x00000020) /*!< Event Mask on line 5 */
+#define EXTI_EMR_MR6 ((uint32_t)0x00000040) /*!< Event Mask on line 6 */
+#define EXTI_EMR_MR7 ((uint32_t)0x00000080) /*!< Event Mask on line 7 */
+#define EXTI_EMR_MR8 ((uint32_t)0x00000100) /*!< Event Mask on line 8 */
+#define EXTI_EMR_MR9 ((uint32_t)0x00000200) /*!< Event Mask on line 9 */
+#define EXTI_EMR_MR10 ((uint32_t)0x00000400) /*!< Event Mask on line 10 */
+#define EXTI_EMR_MR11 ((uint32_t)0x00000800) /*!< Event Mask on line 11 */
+#define EXTI_EMR_MR12 ((uint32_t)0x00001000) /*!< Event Mask on line 12 */
+#define EXTI_EMR_MR13 ((uint32_t)0x00002000) /*!< Event Mask on line 13 */
+#define EXTI_EMR_MR14 ((uint32_t)0x00004000) /*!< Event Mask on line 14 */
+#define EXTI_EMR_MR15 ((uint32_t)0x00008000) /*!< Event Mask on line 15 */
+#define EXTI_EMR_MR16 ((uint32_t)0x00010000) /*!< Event Mask on line 16 */
+#define EXTI_EMR_MR17 ((uint32_t)0x00020000) /*!< Event Mask on line 17 */
+#define EXTI_EMR_MR19 ((uint32_t)0x00080000) /*!< Event Mask on line 19 */
+#define EXTI_EMR_MR21 ((uint32_t)0x00200000) /*!< Event Mask on line 21 */
+#define EXTI_EMR_MR22 ((uint32_t)0x00400000) /*!< Event Mask on line 22 */
+#define EXTI_EMR_MR23 ((uint32_t)0x00800000) /*!< Event Mask on line 23 */
+#define EXTI_EMR_MR25 ((uint32_t)0x02000000) /*!< Event Mask on line 25 */
+#define EXTI_EMR_MR27 ((uint32_t)0x08000000) /*!< Event Mask on line 27 */
+
+/******************* Bit definition for EXTI_RTSR register ******************/
+#define EXTI_RTSR_TR0 ((uint32_t)0x00000001) /*!< Rising trigger event configuration bit of line 0 */
+#define EXTI_RTSR_TR1 ((uint32_t)0x00000002) /*!< Rising trigger event configuration bit of line 1 */
+#define EXTI_RTSR_TR2 ((uint32_t)0x00000004) /*!< Rising trigger event configuration bit of line 2 */
+#define EXTI_RTSR_TR3 ((uint32_t)0x00000008) /*!< Rising trigger event configuration bit of line 3 */
+#define EXTI_RTSR_TR4 ((uint32_t)0x00000010) /*!< Rising trigger event configuration bit of line 4 */
+#define EXTI_RTSR_TR5 ((uint32_t)0x00000020) /*!< Rising trigger event configuration bit of line 5 */
+#define EXTI_RTSR_TR6 ((uint32_t)0x00000040) /*!< Rising trigger event configuration bit of line 6 */
+#define EXTI_RTSR_TR7 ((uint32_t)0x00000080) /*!< Rising trigger event configuration bit of line 7 */
+#define EXTI_RTSR_TR8 ((uint32_t)0x00000100) /*!< Rising trigger event configuration bit of line 8 */
+#define EXTI_RTSR_TR9 ((uint32_t)0x00000200) /*!< Rising trigger event configuration bit of line 9 */
+#define EXTI_RTSR_TR10 ((uint32_t)0x00000400) /*!< Rising trigger event configuration bit of line 10 */
+#define EXTI_RTSR_TR11 ((uint32_t)0x00000800) /*!< Rising trigger event configuration bit of line 11 */
+#define EXTI_RTSR_TR12 ((uint32_t)0x00001000) /*!< Rising trigger event configuration bit of line 12 */
+#define EXTI_RTSR_TR13 ((uint32_t)0x00002000) /*!< Rising trigger event configuration bit of line 13 */
+#define EXTI_RTSR_TR14 ((uint32_t)0x00004000) /*!< Rising trigger event configuration bit of line 14 */
+#define EXTI_RTSR_TR15 ((uint32_t)0x00008000) /*!< Rising trigger event configuration bit of line 15 */
+#define EXTI_RTSR_TR16 ((uint32_t)0x00010000) /*!< Rising trigger event configuration bit of line 16 */
+#define EXTI_RTSR_TR17 ((uint32_t)0x00020000) /*!< Rising trigger event configuration bit of line 17 */
+#define EXTI_RTSR_TR19 ((uint32_t)0x00080000) /*!< Rising trigger event configuration bit of line 19 */
+
+/******************* Bit definition for EXTI_FTSR register *******************/
+#define EXTI_FTSR_TR0 ((uint32_t)0x00000001) /*!< Falling trigger event configuration bit of line 0 */
+#define EXTI_FTSR_TR1 ((uint32_t)0x00000002) /*!< Falling trigger event configuration bit of line 1 */
+#define EXTI_FTSR_TR2 ((uint32_t)0x00000004) /*!< Falling trigger event configuration bit of line 2 */
+#define EXTI_FTSR_TR3 ((uint32_t)0x00000008) /*!< Falling trigger event configuration bit of line 3 */
+#define EXTI_FTSR_TR4 ((uint32_t)0x00000010) /*!< Falling trigger event configuration bit of line 4 */
+#define EXTI_FTSR_TR5 ((uint32_t)0x00000020) /*!< Falling trigger event configuration bit of line 5 */
+#define EXTI_FTSR_TR6 ((uint32_t)0x00000040) /*!< Falling trigger event configuration bit of line 6 */
+#define EXTI_FTSR_TR7 ((uint32_t)0x00000080) /*!< Falling trigger event configuration bit of line 7 */
+#define EXTI_FTSR_TR8 ((uint32_t)0x00000100) /*!< Falling trigger event configuration bit of line 8 */
+#define EXTI_FTSR_TR9 ((uint32_t)0x00000200) /*!< Falling trigger event configuration bit of line 9 */
+#define EXTI_FTSR_TR10 ((uint32_t)0x00000400) /*!< Falling trigger event configuration bit of line 10 */
+#define EXTI_FTSR_TR11 ((uint32_t)0x00000800) /*!< Falling trigger event configuration bit of line 11 */
+#define EXTI_FTSR_TR12 ((uint32_t)0x00001000) /*!< Falling trigger event configuration bit of line 12 */
+#define EXTI_FTSR_TR13 ((uint32_t)0x00002000) /*!< Falling trigger event configuration bit of line 13 */
+#define EXTI_FTSR_TR14 ((uint32_t)0x00004000) /*!< Falling trigger event configuration bit of line 14 */
+#define EXTI_FTSR_TR15 ((uint32_t)0x00008000) /*!< Falling trigger event configuration bit of line 15 */
+#define EXTI_FTSR_TR16 ((uint32_t)0x00010000) /*!< Falling trigger event configuration bit of line 16 */
+#define EXTI_FTSR_TR17 ((uint32_t)0x00020000) /*!< Falling trigger event configuration bit of line 17 */
+#define EXTI_FTSR_TR19 ((uint32_t)0x00080000) /*!< Falling trigger event configuration bit of line 19 */
+
+/******************* Bit definition for EXTI_SWIER register *******************/
+#define EXTI_SWIER_SWIER0 ((uint32_t)0x00000001) /*!< Software Interrupt on line 0 */
+#define EXTI_SWIER_SWIER1 ((uint32_t)0x00000002) /*!< Software Interrupt on line 1 */
+#define EXTI_SWIER_SWIER2 ((uint32_t)0x00000004) /*!< Software Interrupt on line 2 */
+#define EXTI_SWIER_SWIER3 ((uint32_t)0x00000008) /*!< Software Interrupt on line 3 */
+#define EXTI_SWIER_SWIER4 ((uint32_t)0x00000010) /*!< Software Interrupt on line 4 */
+#define EXTI_SWIER_SWIER5 ((uint32_t)0x00000020) /*!< Software Interrupt on line 5 */
+#define EXTI_SWIER_SWIER6 ((uint32_t)0x00000040) /*!< Software Interrupt on line 6 */
+#define EXTI_SWIER_SWIER7 ((uint32_t)0x00000080) /*!< Software Interrupt on line 7 */
+#define EXTI_SWIER_SWIER8 ((uint32_t)0x00000100) /*!< Software Interrupt on line 8 */
+#define EXTI_SWIER_SWIER9 ((uint32_t)0x00000200) /*!< Software Interrupt on line 9 */
+#define EXTI_SWIER_SWIER10 ((uint32_t)0x00000400) /*!< Software Interrupt on line 10 */
+#define EXTI_SWIER_SWIER11 ((uint32_t)0x00000800) /*!< Software Interrupt on line 11 */
+#define EXTI_SWIER_SWIER12 ((uint32_t)0x00001000) /*!< Software Interrupt on line 12 */
+#define EXTI_SWIER_SWIER13 ((uint32_t)0x00002000) /*!< Software Interrupt on line 13 */
+#define EXTI_SWIER_SWIER14 ((uint32_t)0x00004000) /*!< Software Interrupt on line 14 */
+#define EXTI_SWIER_SWIER15 ((uint32_t)0x00008000) /*!< Software Interrupt on line 15 */
+#define EXTI_SWIER_SWIER16 ((uint32_t)0x00010000) /*!< Software Interrupt on line 16 */
+#define EXTI_SWIER_SWIER17 ((uint32_t)0x00020000) /*!< Software Interrupt on line 17 */
+#define EXTI_SWIER_SWIER19 ((uint32_t)0x00080000) /*!< Software Interrupt on line 19 */
+
+/****************** Bit definition for EXTI_PR register *********************/
+#define EXTI_PR_PR0 ((uint32_t)0x00000001) /*!< Pending bit 0 */
+#define EXTI_PR_PR1 ((uint32_t)0x00000002) /*!< Pending bit 1 */
+#define EXTI_PR_PR2 ((uint32_t)0x00000004) /*!< Pending bit 2 */
+#define EXTI_PR_PR3 ((uint32_t)0x00000008) /*!< Pending bit 3 */
+#define EXTI_PR_PR4 ((uint32_t)0x00000010) /*!< Pending bit 4 */
+#define EXTI_PR_PR5 ((uint32_t)0x00000020) /*!< Pending bit 5 */
+#define EXTI_PR_PR6 ((uint32_t)0x00000040) /*!< Pending bit 6 */
+#define EXTI_PR_PR7 ((uint32_t)0x00000080) /*!< Pending bit 7 */
+#define EXTI_PR_PR8 ((uint32_t)0x00000100) /*!< Pending bit 8 */
+#define EXTI_PR_PR9 ((uint32_t)0x00000200) /*!< Pending bit 9 */
+#define EXTI_PR_PR10 ((uint32_t)0x00000400) /*!< Pending bit 10 */
+#define EXTI_PR_PR11 ((uint32_t)0x00000800) /*!< Pending bit 11 */
+#define EXTI_PR_PR12 ((uint32_t)0x00001000) /*!< Pending bit 12 */
+#define EXTI_PR_PR13 ((uint32_t)0x00002000) /*!< Pending bit 13 */
+#define EXTI_PR_PR14 ((uint32_t)0x00004000) /*!< Pending bit 14 */
+#define EXTI_PR_PR15 ((uint32_t)0x00008000) /*!< Pending bit 15 */
+#define EXTI_PR_PR16 ((uint32_t)0x00010000) /*!< Pending bit 16 */
+#define EXTI_PR_PR17 ((uint32_t)0x00020000) /*!< Pending bit 17 */
+#define EXTI_PR_PR19 ((uint32_t)0x00080000) /*!< Pending bit 19 */
+
+/******************************************************************************/
+/* */
+/* FLASH and Option Bytes Registers */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for FLASH_ACR register ******************/
+#define FLASH_ACR_LATENCY ((uint32_t)0x00000001) /*!< LATENCY bit (Latency) */
+
+#define FLASH_ACR_PRFTBE ((uint32_t)0x00000010) /*!< Prefetch Buffer Enable */
+#define FLASH_ACR_PRFTBS ((uint32_t)0x00000020) /*!< Prefetch Buffer Status */
+
+/****************** Bit definition for FLASH_KEYR register ******************/
+#define FLASH_KEYR_FKEYR ((uint32_t)0xFFFFFFFF) /*!< FPEC Key */
+
+/***************** Bit definition for FLASH_OPTKEYR register ****************/
+#define FLASH_OPTKEYR_OPTKEYR ((uint32_t)0xFFFFFFFF) /*!< Option Byte Key */
+
+/****************** FLASH Keys **********************************************/
+#define FLASH_FKEY1 ((uint32_t)0x45670123) /*!< Flash program erase key1 */
+#define FLASH_FKEY2 ((uint32_t)0xCDEF89AB) /*!< Flash program erase key2: used with FLASH_PEKEY1
+ to unlock the write access to the FPEC. */
+
+#define FLASH_OPTKEY1 ((uint32_t)0x45670123) /*!< Flash option key1 */
+#define FLASH_OPTKEY2 ((uint32_t)0xCDEF89AB) /*!< Flash option key2: used with FLASH_OPTKEY1 to
+ unlock the write access to the option byte block */
+
+/****************** Bit definition for FLASH_SR register *******************/
+#define FLASH_SR_BSY ((uint32_t)0x00000001) /*!< Busy */
+#define FLASH_SR_PGERR ((uint32_t)0x00000004) /*!< Programming Error */
+#define FLASH_SR_WRPRTERR ((uint32_t)0x00000010) /*!< Write Protection Error */
+#define FLASH_SR_EOP ((uint32_t)0x00000020) /*!< End of operation */
+#define FLASH_SR_WRPERR FLASH_SR_WRPRTERR /*!< Legacy of Write Protection Error */
+
+/******************* Bit definition for FLASH_CR register *******************/
+#define FLASH_CR_PG ((uint32_t)0x00000001) /*!< Programming */
+#define FLASH_CR_PER ((uint32_t)0x00000002) /*!< Page Erase */
+#define FLASH_CR_MER ((uint32_t)0x00000004) /*!< Mass Erase */
+#define FLASH_CR_OPTPG ((uint32_t)0x00000010) /*!< Option Byte Programming */
+#define FLASH_CR_OPTER ((uint32_t)0x00000020) /*!< Option Byte Erase */
+#define FLASH_CR_STRT ((uint32_t)0x00000040) /*!< Start */
+#define FLASH_CR_LOCK ((uint32_t)0x00000080) /*!< Lock */
+#define FLASH_CR_OPTWRE ((uint32_t)0x00000200) /*!< Option Bytes Write Enable */
+#define FLASH_CR_ERRIE ((uint32_t)0x00000400) /*!< Error Interrupt Enable */
+#define FLASH_CR_EOPIE ((uint32_t)0x00001000) /*!< End of operation interrupt enable */
+#define FLASH_CR_OBL_LAUNCH ((uint32_t)0x00002000) /*!< Option Bytes Loader Launch */
+
+/******************* Bit definition for FLASH_AR register *******************/
+#define FLASH_AR_FAR ((uint32_t)0xFFFFFFFF) /*!< Flash Address */
+
+/****************** Bit definition for FLASH_OBR register *******************/
+#define FLASH_OBR_OPTERR ((uint32_t)0x00000001) /*!< Option Byte Error */
+#define FLASH_OBR_RDPRT1 ((uint32_t)0x00000002) /*!< Read protection Level 1 */
+#define FLASH_OBR_RDPRT2 ((uint32_t)0x00000004) /*!< Read protection Level 2 */
+
+#define FLASH_OBR_USER ((uint32_t)0x00003700) /*!< User Option Bytes */
+#define FLASH_OBR_IWDG_SW ((uint32_t)0x00000100) /*!< IWDG SW */
+#define FLASH_OBR_nRST_STOP ((uint32_t)0x00000200) /*!< nRST_STOP */
+#define FLASH_OBR_nRST_STDBY ((uint32_t)0x00000400) /*!< nRST_STDBY */
+#define FLASH_OBR_nBOOT1 ((uint32_t)0x00001000) /*!< nBOOT1 */
+#define FLASH_OBR_VDDA_MONITOR ((uint32_t)0x00002000) /*!< VDDA power supply supervisor */
+
+/* Old BOOT1 bit definition, maintained for legacy purpose */
+#define FLASH_OBR_BOOT1 FLASH_OBR_nBOOT1
+
+/* Old OBR_VDDA bit definition, maintained for legacy purpose */
+#define FLASH_OBR_VDDA_ANALOG FLASH_OBR_VDDA_MONITOR
+
+/****************** Bit definition for FLASH_WRPR register ******************/
+#define FLASH_WRPR_WRP ((uint32_t)0x0000FFFF) /*!< Write Protect */
+
+/*----------------------------------------------------------------------------*/
+
+/****************** Bit definition for OB_RDP register **********************/
+#define OB_RDP_RDP ((uint32_t)0x000000FF) /*!< Read protection option byte */
+#define OB_RDP_nRDP ((uint32_t)0x0000FF00) /*!< Read protection complemented option byte */
+
+/****************** Bit definition for OB_USER register *********************/
+#define OB_USER_USER ((uint32_t)0x00FF0000) /*!< User option byte */
+#define OB_USER_nUSER ((uint32_t)0xFF000000) /*!< User complemented option byte */
+
+/****************** Bit definition for OB_WRP0 register *********************/
+#define OB_WRP0_WRP0 ((uint32_t)0x000000FF) /*!< Flash memory write protection option bytes */
+#define OB_WRP0_nWRP0 ((uint32_t)0x0000FF00) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for OB_WRP1 register *********************/
+#define OB_WRP1_WRP1 ((uint32_t)0x00FF0000) /*!< Flash memory write protection option bytes */
+#define OB_WRP1_nWRP1 ((uint32_t)0xFF000000) /*!< Flash memory write protection complemented option bytes */
+
+/******************************************************************************/
+/* */
+/* General Purpose IOs (GPIO) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for GPIO_MODER register *****************/
+#define GPIO_MODER_MODER0 ((uint32_t)0x00000003)
+#define GPIO_MODER_MODER0_0 ((uint32_t)0x00000001)
+#define GPIO_MODER_MODER0_1 ((uint32_t)0x00000002)
+#define GPIO_MODER_MODER1 ((uint32_t)0x0000000C)
+#define GPIO_MODER_MODER1_0 ((uint32_t)0x00000004)
+#define GPIO_MODER_MODER1_1 ((uint32_t)0x00000008)
+#define GPIO_MODER_MODER2 ((uint32_t)0x00000030)
+#define GPIO_MODER_MODER2_0 ((uint32_t)0x00000010)
+#define GPIO_MODER_MODER2_1 ((uint32_t)0x00000020)
+#define GPIO_MODER_MODER3 ((uint32_t)0x000000C0)
+#define GPIO_MODER_MODER3_0 ((uint32_t)0x00000040)
+#define GPIO_MODER_MODER3_1 ((uint32_t)0x00000080)
+#define GPIO_MODER_MODER4 ((uint32_t)0x00000300)
+#define GPIO_MODER_MODER4_0 ((uint32_t)0x00000100)
+#define GPIO_MODER_MODER4_1 ((uint32_t)0x00000200)
+#define GPIO_MODER_MODER5 ((uint32_t)0x00000C00)
+#define GPIO_MODER_MODER5_0 ((uint32_t)0x00000400)
+#define GPIO_MODER_MODER5_1 ((uint32_t)0x00000800)
+#define GPIO_MODER_MODER6 ((uint32_t)0x00003000)
+#define GPIO_MODER_MODER6_0 ((uint32_t)0x00001000)
+#define GPIO_MODER_MODER6_1 ((uint32_t)0x00002000)
+#define GPIO_MODER_MODER7 ((uint32_t)0x0000C000)
+#define GPIO_MODER_MODER7_0 ((uint32_t)0x00004000)
+#define GPIO_MODER_MODER7_1 ((uint32_t)0x00008000)
+#define GPIO_MODER_MODER8 ((uint32_t)0x00030000)
+#define GPIO_MODER_MODER8_0 ((uint32_t)0x00010000)
+#define GPIO_MODER_MODER8_1 ((uint32_t)0x00020000)
+#define GPIO_MODER_MODER9 ((uint32_t)0x000C0000)
+#define GPIO_MODER_MODER9_0 ((uint32_t)0x00040000)
+#define GPIO_MODER_MODER9_1 ((uint32_t)0x00080000)
+#define GPIO_MODER_MODER10 ((uint32_t)0x00300000)
+#define GPIO_MODER_MODER10_0 ((uint32_t)0x00100000)
+#define GPIO_MODER_MODER10_1 ((uint32_t)0x00200000)
+#define GPIO_MODER_MODER11 ((uint32_t)0x00C00000)
+#define GPIO_MODER_MODER11_0 ((uint32_t)0x00400000)
+#define GPIO_MODER_MODER11_1 ((uint32_t)0x00800000)
+#define GPIO_MODER_MODER12 ((uint32_t)0x03000000)
+#define GPIO_MODER_MODER12_0 ((uint32_t)0x01000000)
+#define GPIO_MODER_MODER12_1 ((uint32_t)0x02000000)
+#define GPIO_MODER_MODER13 ((uint32_t)0x0C000000)
+#define GPIO_MODER_MODER13_0 ((uint32_t)0x04000000)
+#define GPIO_MODER_MODER13_1 ((uint32_t)0x08000000)
+#define GPIO_MODER_MODER14 ((uint32_t)0x30000000)
+#define GPIO_MODER_MODER14_0 ((uint32_t)0x10000000)
+#define GPIO_MODER_MODER14_1 ((uint32_t)0x20000000)
+#define GPIO_MODER_MODER15 ((uint32_t)0xC0000000)
+#define GPIO_MODER_MODER15_0 ((uint32_t)0x40000000)
+#define GPIO_MODER_MODER15_1 ((uint32_t)0x80000000)
+
+/****************** Bit definition for GPIO_OTYPER register *****************/
+#define GPIO_OTYPER_OT_0 ((uint32_t)0x00000001)
+#define GPIO_OTYPER_OT_1 ((uint32_t)0x00000002)
+#define GPIO_OTYPER_OT_2 ((uint32_t)0x00000004)
+#define GPIO_OTYPER_OT_3 ((uint32_t)0x00000008)
+#define GPIO_OTYPER_OT_4 ((uint32_t)0x00000010)
+#define GPIO_OTYPER_OT_5 ((uint32_t)0x00000020)
+#define GPIO_OTYPER_OT_6 ((uint32_t)0x00000040)
+#define GPIO_OTYPER_OT_7 ((uint32_t)0x00000080)
+#define GPIO_OTYPER_OT_8 ((uint32_t)0x00000100)
+#define GPIO_OTYPER_OT_9 ((uint32_t)0x00000200)
+#define GPIO_OTYPER_OT_10 ((uint32_t)0x00000400)
+#define GPIO_OTYPER_OT_11 ((uint32_t)0x00000800)
+#define GPIO_OTYPER_OT_12 ((uint32_t)0x00001000)
+#define GPIO_OTYPER_OT_13 ((uint32_t)0x00002000)
+#define GPIO_OTYPER_OT_14 ((uint32_t)0x00004000)
+#define GPIO_OTYPER_OT_15 ((uint32_t)0x00008000)
+
+/**************** Bit definition for GPIO_OSPEEDR register ******************/
+#define GPIO_OSPEEDR_OSPEEDR0 ((uint32_t)0x00000003)
+#define GPIO_OSPEEDR_OSPEEDR0_0 ((uint32_t)0x00000001)
+#define GPIO_OSPEEDR_OSPEEDR0_1 ((uint32_t)0x00000002)
+#define GPIO_OSPEEDR_OSPEEDR1 ((uint32_t)0x0000000C)
+#define GPIO_OSPEEDR_OSPEEDR1_0 ((uint32_t)0x00000004)
+#define GPIO_OSPEEDR_OSPEEDR1_1 ((uint32_t)0x00000008)
+#define GPIO_OSPEEDR_OSPEEDR2 ((uint32_t)0x00000030)
+#define GPIO_OSPEEDR_OSPEEDR2_0 ((uint32_t)0x00000010)
+#define GPIO_OSPEEDR_OSPEEDR2_1 ((uint32_t)0x00000020)
+#define GPIO_OSPEEDR_OSPEEDR3 ((uint32_t)0x000000C0)
+#define GPIO_OSPEEDR_OSPEEDR3_0 ((uint32_t)0x00000040)
+#define GPIO_OSPEEDR_OSPEEDR3_1 ((uint32_t)0x00000080)
+#define GPIO_OSPEEDR_OSPEEDR4 ((uint32_t)0x00000300)
+#define GPIO_OSPEEDR_OSPEEDR4_0 ((uint32_t)0x00000100)
+#define GPIO_OSPEEDR_OSPEEDR4_1 ((uint32_t)0x00000200)
+#define GPIO_OSPEEDR_OSPEEDR5 ((uint32_t)0x00000C00)
+#define GPIO_OSPEEDR_OSPEEDR5_0 ((uint32_t)0x00000400)
+#define GPIO_OSPEEDR_OSPEEDR5_1 ((uint32_t)0x00000800)
+#define GPIO_OSPEEDR_OSPEEDR6 ((uint32_t)0x00003000)
+#define GPIO_OSPEEDR_OSPEEDR6_0 ((uint32_t)0x00001000)
+#define GPIO_OSPEEDR_OSPEEDR6_1 ((uint32_t)0x00002000)
+#define GPIO_OSPEEDR_OSPEEDR7 ((uint32_t)0x0000C000)
+#define GPIO_OSPEEDR_OSPEEDR7_0 ((uint32_t)0x00004000)
+#define GPIO_OSPEEDR_OSPEEDR7_1 ((uint32_t)0x00008000)
+#define GPIO_OSPEEDR_OSPEEDR8 ((uint32_t)0x00030000)
+#define GPIO_OSPEEDR_OSPEEDR8_0 ((uint32_t)0x00010000)
+#define GPIO_OSPEEDR_OSPEEDR8_1 ((uint32_t)0x00020000)
+#define GPIO_OSPEEDR_OSPEEDR9 ((uint32_t)0x000C0000)
+#define GPIO_OSPEEDR_OSPEEDR9_0 ((uint32_t)0x00040000)
+#define GPIO_OSPEEDR_OSPEEDR9_1 ((uint32_t)0x00080000)
+#define GPIO_OSPEEDR_OSPEEDR10 ((uint32_t)0x00300000)
+#define GPIO_OSPEEDR_OSPEEDR10_0 ((uint32_t)0x00100000)
+#define GPIO_OSPEEDR_OSPEEDR10_1 ((uint32_t)0x00200000)
+#define GPIO_OSPEEDR_OSPEEDR11 ((uint32_t)0x00C00000)
+#define GPIO_OSPEEDR_OSPEEDR11_0 ((uint32_t)0x00400000)
+#define GPIO_OSPEEDR_OSPEEDR11_1 ((uint32_t)0x00800000)
+#define GPIO_OSPEEDR_OSPEEDR12 ((uint32_t)0x03000000)
+#define GPIO_OSPEEDR_OSPEEDR12_0 ((uint32_t)0x01000000)
+#define GPIO_OSPEEDR_OSPEEDR12_1 ((uint32_t)0x02000000)
+#define GPIO_OSPEEDR_OSPEEDR13 ((uint32_t)0x0C000000)
+#define GPIO_OSPEEDR_OSPEEDR13_0 ((uint32_t)0x04000000)
+#define GPIO_OSPEEDR_OSPEEDR13_1 ((uint32_t)0x08000000)
+#define GPIO_OSPEEDR_OSPEEDR14 ((uint32_t)0x30000000)
+#define GPIO_OSPEEDR_OSPEEDR14_0 ((uint32_t)0x10000000)
+#define GPIO_OSPEEDR_OSPEEDR14_1 ((uint32_t)0x20000000)
+#define GPIO_OSPEEDR_OSPEEDR15 ((uint32_t)0xC0000000)
+#define GPIO_OSPEEDR_OSPEEDR15_0 ((uint32_t)0x40000000)
+#define GPIO_OSPEEDR_OSPEEDR15_1 ((uint32_t)0x80000000)
+
+/* Old Bit definition for GPIO_OSPEEDR register maintained for legacy purpose */
+#define GPIO_OSPEEDER_OSPEEDR0 GPIO_OSPEEDR_OSPEEDR0
+#define GPIO_OSPEEDER_OSPEEDR0_0 GPIO_OSPEEDR_OSPEEDR0_0
+#define GPIO_OSPEEDER_OSPEEDR0_1 GPIO_OSPEEDR_OSPEEDR0_1
+#define GPIO_OSPEEDER_OSPEEDR1 GPIO_OSPEEDR_OSPEEDR1
+#define GPIO_OSPEEDER_OSPEEDR1_0 GPIO_OSPEEDR_OSPEEDR1_0
+#define GPIO_OSPEEDER_OSPEEDR1_1 GPIO_OSPEEDR_OSPEEDR1_1
+#define GPIO_OSPEEDER_OSPEEDR2 GPIO_OSPEEDR_OSPEEDR2
+#define GPIO_OSPEEDER_OSPEEDR2_0 GPIO_OSPEEDR_OSPEEDR2_0
+#define GPIO_OSPEEDER_OSPEEDR2_1 GPIO_OSPEEDR_OSPEEDR2_1
+#define GPIO_OSPEEDER_OSPEEDR3 GPIO_OSPEEDR_OSPEEDR3
+#define GPIO_OSPEEDER_OSPEEDR3_0 GPIO_OSPEEDR_OSPEEDR3_0
+#define GPIO_OSPEEDER_OSPEEDR3_1 GPIO_OSPEEDR_OSPEEDR3_1
+#define GPIO_OSPEEDER_OSPEEDR4 GPIO_OSPEEDR_OSPEEDR4
+#define GPIO_OSPEEDER_OSPEEDR4_0 GPIO_OSPEEDR_OSPEEDR4_0
+#define GPIO_OSPEEDER_OSPEEDR4_1 GPIO_OSPEEDR_OSPEEDR4_1
+#define GPIO_OSPEEDER_OSPEEDR5 GPIO_OSPEEDR_OSPEEDR5
+#define GPIO_OSPEEDER_OSPEEDR5_0 GPIO_OSPEEDR_OSPEEDR5_0
+#define GPIO_OSPEEDER_OSPEEDR5_1 GPIO_OSPEEDR_OSPEEDR5_1
+#define GPIO_OSPEEDER_OSPEEDR6 GPIO_OSPEEDR_OSPEEDR6
+#define GPIO_OSPEEDER_OSPEEDR6_0 GPIO_OSPEEDR_OSPEEDR6_0
+#define GPIO_OSPEEDER_OSPEEDR6_1 GPIO_OSPEEDR_OSPEEDR6_1
+#define GPIO_OSPEEDER_OSPEEDR7 GPIO_OSPEEDR_OSPEEDR7
+#define GPIO_OSPEEDER_OSPEEDR7_0 GPIO_OSPEEDR_OSPEEDR7_0
+#define GPIO_OSPEEDER_OSPEEDR7_1 GPIO_OSPEEDR_OSPEEDR7_1
+#define GPIO_OSPEEDER_OSPEEDR8 GPIO_OSPEEDR_OSPEEDR8
+#define GPIO_OSPEEDER_OSPEEDR8_0 GPIO_OSPEEDR_OSPEEDR8_0
+#define GPIO_OSPEEDER_OSPEEDR8_1 GPIO_OSPEEDR_OSPEEDR8_1
+#define GPIO_OSPEEDER_OSPEEDR9 GPIO_OSPEEDR_OSPEEDR9
+#define GPIO_OSPEEDER_OSPEEDR9_0 GPIO_OSPEEDR_OSPEEDR9_0
+#define GPIO_OSPEEDER_OSPEEDR9_1 GPIO_OSPEEDR_OSPEEDR9_1
+#define GPIO_OSPEEDER_OSPEEDR10 GPIO_OSPEEDR_OSPEEDR10
+#define GPIO_OSPEEDER_OSPEEDR10_0 GPIO_OSPEEDR_OSPEEDR10_0
+#define GPIO_OSPEEDER_OSPEEDR10_1 GPIO_OSPEEDR_OSPEEDR10_1
+#define GPIO_OSPEEDER_OSPEEDR11 GPIO_OSPEEDR_OSPEEDR11
+#define GPIO_OSPEEDER_OSPEEDR11_0 GPIO_OSPEEDR_OSPEEDR11_0
+#define GPIO_OSPEEDER_OSPEEDR11_1 GPIO_OSPEEDR_OSPEEDR11_1
+#define GPIO_OSPEEDER_OSPEEDR12 GPIO_OSPEEDR_OSPEEDR12
+#define GPIO_OSPEEDER_OSPEEDR12_0 GPIO_OSPEEDR_OSPEEDR12_0
+#define GPIO_OSPEEDER_OSPEEDR12_1 GPIO_OSPEEDR_OSPEEDR12_1
+#define GPIO_OSPEEDER_OSPEEDR13 GPIO_OSPEEDR_OSPEEDR13
+#define GPIO_OSPEEDER_OSPEEDR13_0 GPIO_OSPEEDR_OSPEEDR13_0
+#define GPIO_OSPEEDER_OSPEEDR13_1 GPIO_OSPEEDR_OSPEEDR13_1
+#define GPIO_OSPEEDER_OSPEEDR14 GPIO_OSPEEDR_OSPEEDR14
+#define GPIO_OSPEEDER_OSPEEDR14_0 GPIO_OSPEEDR_OSPEEDR14_0
+#define GPIO_OSPEEDER_OSPEEDR14_1 GPIO_OSPEEDR_OSPEEDR14_1
+#define GPIO_OSPEEDER_OSPEEDR15 GPIO_OSPEEDR_OSPEEDR15
+#define GPIO_OSPEEDER_OSPEEDR15_0 GPIO_OSPEEDR_OSPEEDR15_0
+#define GPIO_OSPEEDER_OSPEEDR15_1 GPIO_OSPEEDR_OSPEEDR15_1
+
+/******************* Bit definition for GPIO_PUPDR register ******************/
+#define GPIO_PUPDR_PUPDR0 ((uint32_t)0x00000003)
+#define GPIO_PUPDR_PUPDR0_0 ((uint32_t)0x00000001)
+#define GPIO_PUPDR_PUPDR0_1 ((uint32_t)0x00000002)
+#define GPIO_PUPDR_PUPDR1 ((uint32_t)0x0000000C)
+#define GPIO_PUPDR_PUPDR1_0 ((uint32_t)0x00000004)
+#define GPIO_PUPDR_PUPDR1_1 ((uint32_t)0x00000008)
+#define GPIO_PUPDR_PUPDR2 ((uint32_t)0x00000030)
+#define GPIO_PUPDR_PUPDR2_0 ((uint32_t)0x00000010)
+#define GPIO_PUPDR_PUPDR2_1 ((uint32_t)0x00000020)
+#define GPIO_PUPDR_PUPDR3 ((uint32_t)0x000000C0)
+#define GPIO_PUPDR_PUPDR3_0 ((uint32_t)0x00000040)
+#define GPIO_PUPDR_PUPDR3_1 ((uint32_t)0x00000080)
+#define GPIO_PUPDR_PUPDR4 ((uint32_t)0x00000300)
+#define GPIO_PUPDR_PUPDR4_0 ((uint32_t)0x00000100)
+#define GPIO_PUPDR_PUPDR4_1 ((uint32_t)0x00000200)
+#define GPIO_PUPDR_PUPDR5 ((uint32_t)0x00000C00)
+#define GPIO_PUPDR_PUPDR5_0 ((uint32_t)0x00000400)
+#define GPIO_PUPDR_PUPDR5_1 ((uint32_t)0x00000800)
+#define GPIO_PUPDR_PUPDR6 ((uint32_t)0x00003000)
+#define GPIO_PUPDR_PUPDR6_0 ((uint32_t)0x00001000)
+#define GPIO_PUPDR_PUPDR6_1 ((uint32_t)0x00002000)
+#define GPIO_PUPDR_PUPDR7 ((uint32_t)0x0000C000)
+#define GPIO_PUPDR_PUPDR7_0 ((uint32_t)0x00004000)
+#define GPIO_PUPDR_PUPDR7_1 ((uint32_t)0x00008000)
+#define GPIO_PUPDR_PUPDR8 ((uint32_t)0x00030000)
+#define GPIO_PUPDR_PUPDR8_0 ((uint32_t)0x00010000)
+#define GPIO_PUPDR_PUPDR8_1 ((uint32_t)0x00020000)
+#define GPIO_PUPDR_PUPDR9 ((uint32_t)0x000C0000)
+#define GPIO_PUPDR_PUPDR9_0 ((uint32_t)0x00040000)
+#define GPIO_PUPDR_PUPDR9_1 ((uint32_t)0x00080000)
+#define GPIO_PUPDR_PUPDR10 ((uint32_t)0x00300000)
+#define GPIO_PUPDR_PUPDR10_0 ((uint32_t)0x00100000)
+#define GPIO_PUPDR_PUPDR10_1 ((uint32_t)0x00200000)
+#define GPIO_PUPDR_PUPDR11 ((uint32_t)0x00C00000)
+#define GPIO_PUPDR_PUPDR11_0 ((uint32_t)0x00400000)
+#define GPIO_PUPDR_PUPDR11_1 ((uint32_t)0x00800000)
+#define GPIO_PUPDR_PUPDR12 ((uint32_t)0x03000000)
+#define GPIO_PUPDR_PUPDR12_0 ((uint32_t)0x01000000)
+#define GPIO_PUPDR_PUPDR12_1 ((uint32_t)0x02000000)
+#define GPIO_PUPDR_PUPDR13 ((uint32_t)0x0C000000)
+#define GPIO_PUPDR_PUPDR13_0 ((uint32_t)0x04000000)
+#define GPIO_PUPDR_PUPDR13_1 ((uint32_t)0x08000000)
+#define GPIO_PUPDR_PUPDR14 ((uint32_t)0x30000000)
+#define GPIO_PUPDR_PUPDR14_0 ((uint32_t)0x10000000)
+#define GPIO_PUPDR_PUPDR14_1 ((uint32_t)0x20000000)
+#define GPIO_PUPDR_PUPDR15 ((uint32_t)0xC0000000)
+#define GPIO_PUPDR_PUPDR15_0 ((uint32_t)0x40000000)
+#define GPIO_PUPDR_PUPDR15_1 ((uint32_t)0x80000000)
+
+/******************* Bit definition for GPIO_IDR register *******************/
+#define GPIO_IDR_0 ((uint32_t)0x00000001)
+#define GPIO_IDR_1 ((uint32_t)0x00000002)
+#define GPIO_IDR_2 ((uint32_t)0x00000004)
+#define GPIO_IDR_3 ((uint32_t)0x00000008)
+#define GPIO_IDR_4 ((uint32_t)0x00000010)
+#define GPIO_IDR_5 ((uint32_t)0x00000020)
+#define GPIO_IDR_6 ((uint32_t)0x00000040)
+#define GPIO_IDR_7 ((uint32_t)0x00000080)
+#define GPIO_IDR_8 ((uint32_t)0x00000100)
+#define GPIO_IDR_9 ((uint32_t)0x00000200)
+#define GPIO_IDR_10 ((uint32_t)0x00000400)
+#define GPIO_IDR_11 ((uint32_t)0x00000800)
+#define GPIO_IDR_12 ((uint32_t)0x00001000)
+#define GPIO_IDR_13 ((uint32_t)0x00002000)
+#define GPIO_IDR_14 ((uint32_t)0x00004000)
+#define GPIO_IDR_15 ((uint32_t)0x00008000)
+
+/****************** Bit definition for GPIO_ODR register ********************/
+#define GPIO_ODR_0 ((uint32_t)0x00000001)
+#define GPIO_ODR_1 ((uint32_t)0x00000002)
+#define GPIO_ODR_2 ((uint32_t)0x00000004)
+#define GPIO_ODR_3 ((uint32_t)0x00000008)
+#define GPIO_ODR_4 ((uint32_t)0x00000010)
+#define GPIO_ODR_5 ((uint32_t)0x00000020)
+#define GPIO_ODR_6 ((uint32_t)0x00000040)
+#define GPIO_ODR_7 ((uint32_t)0x00000080)
+#define GPIO_ODR_8 ((uint32_t)0x00000100)
+#define GPIO_ODR_9 ((uint32_t)0x00000200)
+#define GPIO_ODR_10 ((uint32_t)0x00000400)
+#define GPIO_ODR_11 ((uint32_t)0x00000800)
+#define GPIO_ODR_12 ((uint32_t)0x00001000)
+#define GPIO_ODR_13 ((uint32_t)0x00002000)
+#define GPIO_ODR_14 ((uint32_t)0x00004000)
+#define GPIO_ODR_15 ((uint32_t)0x00008000)
+
+/****************** Bit definition for GPIO_BSRR register ********************/
+#define GPIO_BSRR_BS_0 ((uint32_t)0x00000001)
+#define GPIO_BSRR_BS_1 ((uint32_t)0x00000002)
+#define GPIO_BSRR_BS_2 ((uint32_t)0x00000004)
+#define GPIO_BSRR_BS_3 ((uint32_t)0x00000008)
+#define GPIO_BSRR_BS_4 ((uint32_t)0x00000010)
+#define GPIO_BSRR_BS_5 ((uint32_t)0x00000020)
+#define GPIO_BSRR_BS_6 ((uint32_t)0x00000040)
+#define GPIO_BSRR_BS_7 ((uint32_t)0x00000080)
+#define GPIO_BSRR_BS_8 ((uint32_t)0x00000100)
+#define GPIO_BSRR_BS_9 ((uint32_t)0x00000200)
+#define GPIO_BSRR_BS_10 ((uint32_t)0x00000400)
+#define GPIO_BSRR_BS_11 ((uint32_t)0x00000800)
+#define GPIO_BSRR_BS_12 ((uint32_t)0x00001000)
+#define GPIO_BSRR_BS_13 ((uint32_t)0x00002000)
+#define GPIO_BSRR_BS_14 ((uint32_t)0x00004000)
+#define GPIO_BSRR_BS_15 ((uint32_t)0x00008000)
+#define GPIO_BSRR_BR_0 ((uint32_t)0x00010000)
+#define GPIO_BSRR_BR_1 ((uint32_t)0x00020000)
+#define GPIO_BSRR_BR_2 ((uint32_t)0x00040000)
+#define GPIO_BSRR_BR_3 ((uint32_t)0x00080000)
+#define GPIO_BSRR_BR_4 ((uint32_t)0x00100000)
+#define GPIO_BSRR_BR_5 ((uint32_t)0x00200000)
+#define GPIO_BSRR_BR_6 ((uint32_t)0x00400000)
+#define GPIO_BSRR_BR_7 ((uint32_t)0x00800000)
+#define GPIO_BSRR_BR_8 ((uint32_t)0x01000000)
+#define GPIO_BSRR_BR_9 ((uint32_t)0x02000000)
+#define GPIO_BSRR_BR_10 ((uint32_t)0x04000000)
+#define GPIO_BSRR_BR_11 ((uint32_t)0x08000000)
+#define GPIO_BSRR_BR_12 ((uint32_t)0x10000000)
+#define GPIO_BSRR_BR_13 ((uint32_t)0x20000000)
+#define GPIO_BSRR_BR_14 ((uint32_t)0x40000000)
+#define GPIO_BSRR_BR_15 ((uint32_t)0x80000000)
+
+/****************** Bit definition for GPIO_LCKR register ********************/
+#define GPIO_LCKR_LCK0 ((uint32_t)0x00000001)
+#define GPIO_LCKR_LCK1 ((uint32_t)0x00000002)
+#define GPIO_LCKR_LCK2 ((uint32_t)0x00000004)
+#define GPIO_LCKR_LCK3 ((uint32_t)0x00000008)
+#define GPIO_LCKR_LCK4 ((uint32_t)0x00000010)
+#define GPIO_LCKR_LCK5 ((uint32_t)0x00000020)
+#define GPIO_LCKR_LCK6 ((uint32_t)0x00000040)
+#define GPIO_LCKR_LCK7 ((uint32_t)0x00000080)
+#define GPIO_LCKR_LCK8 ((uint32_t)0x00000100)
+#define GPIO_LCKR_LCK9 ((uint32_t)0x00000200)
+#define GPIO_LCKR_LCK10 ((uint32_t)0x00000400)
+#define GPIO_LCKR_LCK11 ((uint32_t)0x00000800)
+#define GPIO_LCKR_LCK12 ((uint32_t)0x00001000)
+#define GPIO_LCKR_LCK13 ((uint32_t)0x00002000)
+#define GPIO_LCKR_LCK14 ((uint32_t)0x00004000)
+#define GPIO_LCKR_LCK15 ((uint32_t)0x00008000)
+#define GPIO_LCKR_LCKK ((uint32_t)0x00010000)
+
+/****************** Bit definition for GPIO_AFRL register ********************/
+#define GPIO_AFRL_AFRL0 ((uint32_t)0x0000000F)
+#define GPIO_AFRL_AFRL1 ((uint32_t)0x000000F0)
+#define GPIO_AFRL_AFRL2 ((uint32_t)0x00000F00)
+#define GPIO_AFRL_AFRL3 ((uint32_t)0x0000F000)
+#define GPIO_AFRL_AFRL4 ((uint32_t)0x000F0000)
+#define GPIO_AFRL_AFRL5 ((uint32_t)0x00F00000)
+#define GPIO_AFRL_AFRL6 ((uint32_t)0x0F000000)
+#define GPIO_AFRL_AFRL7 ((uint32_t)0xF0000000)
+
+/****************** Bit definition for GPIO_AFRH register ********************/
+#define GPIO_AFRH_AFRH0 ((uint32_t)0x0000000F)
+#define GPIO_AFRH_AFRH1 ((uint32_t)0x000000F0)
+#define GPIO_AFRH_AFRH2 ((uint32_t)0x00000F00)
+#define GPIO_AFRH_AFRH3 ((uint32_t)0x0000F000)
+#define GPIO_AFRH_AFRH4 ((uint32_t)0x000F0000)
+#define GPIO_AFRH_AFRH5 ((uint32_t)0x00F00000)
+#define GPIO_AFRH_AFRH6 ((uint32_t)0x0F000000)
+#define GPIO_AFRH_AFRH7 ((uint32_t)0xF0000000)
+
+/****************** Bit definition for GPIO_BRR register *********************/
+#define GPIO_BRR_BR_0 ((uint32_t)0x00000001)
+#define GPIO_BRR_BR_1 ((uint32_t)0x00000002)
+#define GPIO_BRR_BR_2 ((uint32_t)0x00000004)
+#define GPIO_BRR_BR_3 ((uint32_t)0x00000008)
+#define GPIO_BRR_BR_4 ((uint32_t)0x00000010)
+#define GPIO_BRR_BR_5 ((uint32_t)0x00000020)
+#define GPIO_BRR_BR_6 ((uint32_t)0x00000040)
+#define GPIO_BRR_BR_7 ((uint32_t)0x00000080)
+#define GPIO_BRR_BR_8 ((uint32_t)0x00000100)
+#define GPIO_BRR_BR_9 ((uint32_t)0x00000200)
+#define GPIO_BRR_BR_10 ((uint32_t)0x00000400)
+#define GPIO_BRR_BR_11 ((uint32_t)0x00000800)
+#define GPIO_BRR_BR_12 ((uint32_t)0x00001000)
+#define GPIO_BRR_BR_13 ((uint32_t)0x00002000)
+#define GPIO_BRR_BR_14 ((uint32_t)0x00004000)
+#define GPIO_BRR_BR_15 ((uint32_t)0x00008000)
+
+/******************************************************************************/
+/* */
+/* Inter-integrated Circuit Interface (I2C) */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for I2C_CR1 register *******************/
+#define I2C_CR1_PE ((uint32_t)0x00000001) /*!< Peripheral enable */
+#define I2C_CR1_TXIE ((uint32_t)0x00000002) /*!< TX interrupt enable */
+#define I2C_CR1_RXIE ((uint32_t)0x00000004) /*!< RX interrupt enable */
+#define I2C_CR1_ADDRIE ((uint32_t)0x00000008) /*!< Address match interrupt enable */
+#define I2C_CR1_NACKIE ((uint32_t)0x00000010) /*!< NACK received interrupt enable */
+#define I2C_CR1_STOPIE ((uint32_t)0x00000020) /*!< STOP detection interrupt enable */
+#define I2C_CR1_TCIE ((uint32_t)0x00000040) /*!< Transfer complete interrupt enable */
+#define I2C_CR1_ERRIE ((uint32_t)0x00000080) /*!< Errors interrupt enable */
+#define I2C_CR1_DFN ((uint32_t)0x00000F00) /*!< Digital noise filter */
+#define I2C_CR1_ANFOFF ((uint32_t)0x00001000) /*!< Analog noise filter OFF */
+#define I2C_CR1_SWRST ((uint32_t)0x00002000) /*!< Software reset */
+#define I2C_CR1_TXDMAEN ((uint32_t)0x00004000) /*!< DMA transmission requests enable */
+#define I2C_CR1_RXDMAEN ((uint32_t)0x00008000) /*!< DMA reception requests enable */
+#define I2C_CR1_SBC ((uint32_t)0x00010000) /*!< Slave byte control */
+#define I2C_CR1_NOSTRETCH ((uint32_t)0x00020000) /*!< Clock stretching disable */
+#define I2C_CR1_WUPEN ((uint32_t)0x00040000) /*!< Wakeup from STOP enable */
+#define I2C_CR1_GCEN ((uint32_t)0x00080000) /*!< General call enable */
+#define I2C_CR1_SMBHEN ((uint32_t)0x00100000) /*!< SMBus host address enable */
+#define I2C_CR1_SMBDEN ((uint32_t)0x00200000) /*!< SMBus device default address enable */
+#define I2C_CR1_ALERTEN ((uint32_t)0x00400000) /*!< SMBus alert enable */
+#define I2C_CR1_PECEN ((uint32_t)0x00800000) /*!< PEC enable */
+
+/****************** Bit definition for I2C_CR2 register ********************/
+#define I2C_CR2_SADD ((uint32_t)0x000003FF) /*!< Slave address (master mode) */
+#define I2C_CR2_RD_WRN ((uint32_t)0x00000400) /*!< Transfer direction (master mode) */
+#define I2C_CR2_ADD10 ((uint32_t)0x00000800) /*!< 10-bit addressing mode (master mode) */
+#define I2C_CR2_HEAD10R ((uint32_t)0x00001000) /*!< 10-bit address header only read direction (master mode) */
+#define I2C_CR2_START ((uint32_t)0x00002000) /*!< START generation */
+#define I2C_CR2_STOP ((uint32_t)0x00004000) /*!< STOP generation (master mode) */
+#define I2C_CR2_NACK ((uint32_t)0x00008000) /*!< NACK generation (slave mode) */
+#define I2C_CR2_NBYTES ((uint32_t)0x00FF0000) /*!< Number of bytes */
+#define I2C_CR2_RELOAD ((uint32_t)0x01000000) /*!< NBYTES reload mode */
+#define I2C_CR2_AUTOEND ((uint32_t)0x02000000) /*!< Automatic end mode (master mode) */
+#define I2C_CR2_PECBYTE ((uint32_t)0x04000000) /*!< Packet error checking byte */
+
+/******************* Bit definition for I2C_OAR1 register ******************/
+#define I2C_OAR1_OA1 ((uint32_t)0x000003FF) /*!< Interface own address 1 */
+#define I2C_OAR1_OA1MODE ((uint32_t)0x00000400) /*!< Own address 1 10-bit mode */
+#define I2C_OAR1_OA1EN ((uint32_t)0x00008000) /*!< Own address 1 enable */
+
+/******************* Bit definition for I2C_OAR2 register ******************/
+#define I2C_OAR2_OA2 ((uint32_t)0x000000FE) /*!< Interface own address 2 */
+#define I2C_OAR2_OA2MSK ((uint32_t)0x00000700) /*!< Own address 2 masks */
+#define I2C_OAR2_OA2EN ((uint32_t)0x00008000) /*!< Own address 2 enable */
+
+/******************* Bit definition for I2C_TIMINGR register ****************/
+#define I2C_TIMINGR_SCLL ((uint32_t)0x000000FF) /*!< SCL low period (master mode) */
+#define I2C_TIMINGR_SCLH ((uint32_t)0x0000FF00) /*!< SCL high period (master mode) */
+#define I2C_TIMINGR_SDADEL ((uint32_t)0x000F0000) /*!< Data hold time */
+#define I2C_TIMINGR_SCLDEL ((uint32_t)0x00F00000) /*!< Data setup time */
+#define I2C_TIMINGR_PRESC ((uint32_t)0xF0000000) /*!< Timings prescaler */
+
+/******************* Bit definition for I2C_TIMEOUTR register ****************/
+#define I2C_TIMEOUTR_TIMEOUTA ((uint32_t)0x00000FFF) /*!< Bus timeout A */
+#define I2C_TIMEOUTR_TIDLE ((uint32_t)0x00001000) /*!< Idle clock timeout detection */
+#define I2C_TIMEOUTR_TIMOUTEN ((uint32_t)0x00008000) /*!< Clock timeout enable */
+#define I2C_TIMEOUTR_TIMEOUTB ((uint32_t)0x0FFF0000) /*!< Bus timeout B*/
+#define I2C_TIMEOUTR_TEXTEN ((uint32_t)0x80000000) /*!< Extended clock timeout enable */
+
+/****************** Bit definition for I2C_ISR register ********************/
+#define I2C_ISR_TXE ((uint32_t)0x00000001) /*!< Transmit data register empty */
+#define I2C_ISR_TXIS ((uint32_t)0x00000002) /*!< Transmit interrupt status */
+#define I2C_ISR_RXNE ((uint32_t)0x00000004) /*!< Receive data register not empty */
+#define I2C_ISR_ADDR ((uint32_t)0x00000008) /*!< Address matched (slave mode)*/
+#define I2C_ISR_NACKF ((uint32_t)0x00000010) /*!< NACK received flag */
+#define I2C_ISR_STOPF ((uint32_t)0x00000020) /*!< STOP detection flag */
+#define I2C_ISR_TC ((uint32_t)0x00000040) /*!< Transfer complete (master mode) */
+#define I2C_ISR_TCR ((uint32_t)0x00000080) /*!< Transfer complete reload */
+#define I2C_ISR_BERR ((uint32_t)0x00000100) /*!< Bus error */
+#define I2C_ISR_ARLO ((uint32_t)0x00000200) /*!< Arbitration lost */
+#define I2C_ISR_OVR ((uint32_t)0x00000400) /*!< Overrun/Underrun */
+#define I2C_ISR_PECERR ((uint32_t)0x00000800) /*!< PEC error in reception */
+#define I2C_ISR_TIMEOUT ((uint32_t)0x00001000) /*!< Timeout or Tlow detection flag */
+#define I2C_ISR_ALERT ((uint32_t)0x00002000) /*!< SMBus alert */
+#define I2C_ISR_BUSY ((uint32_t)0x00008000) /*!< Bus busy */
+#define I2C_ISR_DIR ((uint32_t)0x00010000) /*!< Transfer direction (slave mode) */
+#define I2C_ISR_ADDCODE ((uint32_t)0x00FE0000) /*!< Address match code (slave mode) */
+
+/****************** Bit definition for I2C_ICR register ********************/
+#define I2C_ICR_ADDRCF ((uint32_t)0x00000008) /*!< Address matched clear flag */
+#define I2C_ICR_NACKCF ((uint32_t)0x00000010) /*!< NACK clear flag */
+#define I2C_ICR_STOPCF ((uint32_t)0x00000020) /*!< STOP detection clear flag */
+#define I2C_ICR_BERRCF ((uint32_t)0x00000100) /*!< Bus error clear flag */
+#define I2C_ICR_ARLOCF ((uint32_t)0x00000200) /*!< Arbitration lost clear flag */
+#define I2C_ICR_OVRCF ((uint32_t)0x00000400) /*!< Overrun/Underrun clear flag */
+#define I2C_ICR_PECCF ((uint32_t)0x00000800) /*!< PAC error clear flag */
+#define I2C_ICR_TIMOUTCF ((uint32_t)0x00001000) /*!< Timeout clear flag */
+#define I2C_ICR_ALERTCF ((uint32_t)0x00002000) /*!< Alert clear flag */
+
+/****************** Bit definition for I2C_PECR register *******************/
+#define I2C_PECR_PEC ((uint32_t)0x000000FF) /*!< PEC register */
+
+/****************** Bit definition for I2C_RXDR register *********************/
+#define I2C_RXDR_RXDATA ((uint32_t)0x000000FF) /*!< 8-bit receive data */
+
+/****************** Bit definition for I2C_TXDR register *******************/
+#define I2C_TXDR_TXDATA ((uint32_t)0x000000FF) /*!< 8-bit transmit data */
+
+/*****************************************************************************/
+/* */
+/* Independent WATCHDOG (IWDG) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for IWDG_KR register *******************/
+#define IWDG_KR_KEY ((uint32_t)0xFFFF) /*!< Key value (write only, read 0000h) */
+
+/******************* Bit definition for IWDG_PR register *******************/
+#define IWDG_PR_PR ((uint32_t)0x07) /*!< PR[2:0] (Prescaler divider) */
+#define IWDG_PR_PR_0 ((uint32_t)0x01) /*!< Bit 0 */
+#define IWDG_PR_PR_1 ((uint32_t)0x02) /*!< Bit 1 */
+#define IWDG_PR_PR_2 ((uint32_t)0x04) /*!< Bit 2 */
+
+/******************* Bit definition for IWDG_RLR register ******************/
+#define IWDG_RLR_RL ((uint32_t)0x0FFF) /*!< Watchdog counter reload value */
+
+/******************* Bit definition for IWDG_SR register *******************/
+#define IWDG_SR_PVU ((uint32_t)0x01) /*!< Watchdog prescaler value update */
+#define IWDG_SR_RVU ((uint32_t)0x02) /*!< Watchdog counter reload value update */
+#define IWDG_SR_WVU ((uint32_t)0x04) /*!< Watchdog counter window value update */
+
+/******************* Bit definition for IWDG_KR register *******************/
+#define IWDG_WINR_WIN ((uint32_t)0x0FFF) /*!< Watchdog counter window value */
+
+/*****************************************************************************/
+/* */
+/* Power Control (PWR) */
+/* */
+/*****************************************************************************/
+
+/******************** Bit definition for PWR_CR register *******************/
+#define PWR_CR_LPDS ((uint32_t)0x00000001) /*!< Low-power Deepsleep */
+#define PWR_CR_PDDS ((uint32_t)0x00000002) /*!< Power Down Deepsleep */
+#define PWR_CR_CWUF ((uint32_t)0x00000004) /*!< Clear Wakeup Flag */
+#define PWR_CR_CSBF ((uint32_t)0x00000008) /*!< Clear Standby Flag */
+#define PWR_CR_DBP ((uint32_t)0x00000100) /*!< Disable Backup Domain write protection */
+
+/******************* Bit definition for PWR_CSR register *******************/
+#define PWR_CSR_WUF ((uint32_t)0x00000001) /*!< Wakeup Flag */
+#define PWR_CSR_SBF ((uint32_t)0x00000002) /*!< Standby Flag */
+#define PWR_CSR_VREFINTRDYF ((uint32_t)0x00000008) /*!< Internal voltage reference (VREFINT) ready flag */
+
+#define PWR_CSR_EWUP1 ((uint32_t)0x00000100) /*!< Enable WKUP pin 1 */
+#define PWR_CSR_EWUP2 ((uint32_t)0x00000200) /*!< Enable WKUP pin 2 */
+
+/*****************************************************************************/
+/* */
+/* Reset and Clock Control */
+/* */
+/*****************************************************************************/
+
+/******************** Bit definition for RCC_CR register *******************/
+#define RCC_CR_HSION ((uint32_t)0x00000001) /*!< Internal High Speed clock enable */
+#define RCC_CR_HSIRDY ((uint32_t)0x00000002) /*!< Internal High Speed clock ready flag */
+
+#define RCC_CR_HSITRIM ((uint32_t)0x000000F8) /*!< Internal High Speed clock trimming */
+#define RCC_CR_HSITRIM_0 ((uint32_t)0x00000008) /*!<Bit 0 */
+#define RCC_CR_HSITRIM_1 ((uint32_t)0x00000010) /*!<Bit 1 */
+#define RCC_CR_HSITRIM_2 ((uint32_t)0x00000020) /*!<Bit 2 */
+#define RCC_CR_HSITRIM_3 ((uint32_t)0x00000040) /*!<Bit 3 */
+#define RCC_CR_HSITRIM_4 ((uint32_t)0x00000080) /*!<Bit 4 */
+
+#define RCC_CR_HSICAL ((uint32_t)0x0000FF00) /*!< Internal High Speed clock Calibration */
+#define RCC_CR_HSICAL_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define RCC_CR_HSICAL_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define RCC_CR_HSICAL_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define RCC_CR_HSICAL_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define RCC_CR_HSICAL_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+#define RCC_CR_HSICAL_5 ((uint32_t)0x00002000) /*!<Bit 5 */
+#define RCC_CR_HSICAL_6 ((uint32_t)0x00004000) /*!<Bit 6 */
+#define RCC_CR_HSICAL_7 ((uint32_t)0x00008000) /*!<Bit 7 */
+
+#define RCC_CR_HSEON ((uint32_t)0x00010000) /*!< External High Speed clock enable */
+#define RCC_CR_HSERDY ((uint32_t)0x00020000) /*!< External High Speed clock ready flag */
+#define RCC_CR_HSEBYP ((uint32_t)0x00040000) /*!< External High Speed clock Bypass */
+#define RCC_CR_CSSON ((uint32_t)0x00080000) /*!< Clock Security System enable */
+#define RCC_CR_PLLON ((uint32_t)0x01000000) /*!< PLL enable */
+#define RCC_CR_PLLRDY ((uint32_t)0x02000000) /*!< PLL clock ready flag */
+
+/******************** Bit definition for RCC_CFGR register *****************/
+/*!< SW configuration */
+#define RCC_CFGR_SW ((uint32_t)0x00000003) /*!< SW[1:0] bits (System clock Switch) */
+#define RCC_CFGR_SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR_SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+#define RCC_CFGR_SW_HSI ((uint32_t)0x00000000) /*!< HSI selected as system clock */
+#define RCC_CFGR_SW_HSE ((uint32_t)0x00000001) /*!< HSE selected as system clock */
+#define RCC_CFGR_SW_PLL ((uint32_t)0x00000002) /*!< PLL selected as system clock */
+
+/*!< SWS configuration */
+#define RCC_CFGR_SWS ((uint32_t)0x0000000C) /*!< SWS[1:0] bits (System Clock Switch Status) */
+#define RCC_CFGR_SWS_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define RCC_CFGR_SWS_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+
+#define RCC_CFGR_SWS_HSI ((uint32_t)0x00000000) /*!< HSI oscillator used as system clock */
+#define RCC_CFGR_SWS_HSE ((uint32_t)0x00000004) /*!< HSE oscillator used as system clock */
+#define RCC_CFGR_SWS_PLL ((uint32_t)0x00000008) /*!< PLL used as system clock */
+
+/*!< HPRE configuration */
+#define RCC_CFGR_HPRE ((uint32_t)0x000000F0) /*!< HPRE[3:0] bits (AHB prescaler) */
+#define RCC_CFGR_HPRE_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define RCC_CFGR_HPRE_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define RCC_CFGR_HPRE_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+#define RCC_CFGR_HPRE_3 ((uint32_t)0x00000080) /*!< Bit 3 */
+
+#define RCC_CFGR_HPRE_DIV1 ((uint32_t)0x00000000) /*!< SYSCLK not divided */
+#define RCC_CFGR_HPRE_DIV2 ((uint32_t)0x00000080) /*!< SYSCLK divided by 2 */
+#define RCC_CFGR_HPRE_DIV4 ((uint32_t)0x00000090) /*!< SYSCLK divided by 4 */
+#define RCC_CFGR_HPRE_DIV8 ((uint32_t)0x000000A0) /*!< SYSCLK divided by 8 */
+#define RCC_CFGR_HPRE_DIV16 ((uint32_t)0x000000B0) /*!< SYSCLK divided by 16 */
+#define RCC_CFGR_HPRE_DIV64 ((uint32_t)0x000000C0) /*!< SYSCLK divided by 64 */
+#define RCC_CFGR_HPRE_DIV128 ((uint32_t)0x000000D0) /*!< SYSCLK divided by 128 */
+#define RCC_CFGR_HPRE_DIV256 ((uint32_t)0x000000E0) /*!< SYSCLK divided by 256 */
+#define RCC_CFGR_HPRE_DIV512 ((uint32_t)0x000000F0) /*!< SYSCLK divided by 512 */
+
+/*!< PPRE configuration */
+#define RCC_CFGR_PPRE ((uint32_t)0x00000700) /*!< PRE[2:0] bits (APB prescaler) */
+#define RCC_CFGR_PPRE_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define RCC_CFGR_PPRE_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define RCC_CFGR_PPRE_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+
+#define RCC_CFGR_PPRE_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */
+#define RCC_CFGR_PPRE_DIV2 ((uint32_t)0x00000400) /*!< HCLK divided by 2 */
+#define RCC_CFGR_PPRE_DIV4 ((uint32_t)0x00000500) /*!< HCLK divided by 4 */
+#define RCC_CFGR_PPRE_DIV8 ((uint32_t)0x00000600) /*!< HCLK divided by 8 */
+#define RCC_CFGR_PPRE_DIV16 ((uint32_t)0x00000700) /*!< HCLK divided by 16 */
+
+/*!< ADCPPRE configuration */
+#define RCC_CFGR_ADCPRE ((uint32_t)0x00004000) /*!< ADCPRE bit (ADC prescaler) */
+
+#define RCC_CFGR_ADCPRE_DIV2 ((uint32_t)0x00000000) /*!< PCLK divided by 2 */
+#define RCC_CFGR_ADCPRE_DIV4 ((uint32_t)0x00004000) /*!< PCLK divided by 4 */
+
+#define RCC_CFGR_PLLSRC ((uint32_t)0x00010000) /*!< PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSI_DIV2 ((uint32_t)0x00000000) /*!< HSI clock divided by 2 selected as PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSE_PREDIV ((uint32_t)0x00010000) /*!< HSE/PREDIV clock selected as PLL entry clock source */
+
+#define RCC_CFGR_PLLXTPRE ((uint32_t)0x00020000) /*!< HSE divider for PLL entry */
+#define RCC_CFGR_PLLXTPRE_HSE_PREDIV_DIV1 ((uint32_t)0x00000000) /*!< HSE/PREDIV clock not divided for PLL entry */
+#define RCC_CFGR_PLLXTPRE_HSE_PREDIV_DIV2 ((uint32_t)0x00020000) /*!< HSE/PREDIV clock divided by 2 for PLL entry */
+
+/*!< PLLMUL configuration */
+#define RCC_CFGR_PLLMUL ((uint32_t)0x003C0000) /*!< PLLMUL[3:0] bits (PLL multiplication factor) */
+#define RCC_CFGR_PLLMUL_0 ((uint32_t)0x00040000) /*!< Bit 0 */
+#define RCC_CFGR_PLLMUL_1 ((uint32_t)0x00080000) /*!< Bit 1 */
+#define RCC_CFGR_PLLMUL_2 ((uint32_t)0x00100000) /*!< Bit 2 */
+#define RCC_CFGR_PLLMUL_3 ((uint32_t)0x00200000) /*!< Bit 3 */
+
+#define RCC_CFGR_PLLMUL2 ((uint32_t)0x00000000) /*!< PLL input clock*2 */
+#define RCC_CFGR_PLLMUL3 ((uint32_t)0x00040000) /*!< PLL input clock*3 */
+#define RCC_CFGR_PLLMUL4 ((uint32_t)0x00080000) /*!< PLL input clock*4 */
+#define RCC_CFGR_PLLMUL5 ((uint32_t)0x000C0000) /*!< PLL input clock*5 */
+#define RCC_CFGR_PLLMUL6 ((uint32_t)0x00100000) /*!< PLL input clock*6 */
+#define RCC_CFGR_PLLMUL7 ((uint32_t)0x00140000) /*!< PLL input clock*7 */
+#define RCC_CFGR_PLLMUL8 ((uint32_t)0x00180000) /*!< PLL input clock*8 */
+#define RCC_CFGR_PLLMUL9 ((uint32_t)0x001C0000) /*!< PLL input clock*9 */
+#define RCC_CFGR_PLLMUL10 ((uint32_t)0x00200000) /*!< PLL input clock10 */
+#define RCC_CFGR_PLLMUL11 ((uint32_t)0x00240000) /*!< PLL input clock*11 */
+#define RCC_CFGR_PLLMUL12 ((uint32_t)0x00280000) /*!< PLL input clock*12 */
+#define RCC_CFGR_PLLMUL13 ((uint32_t)0x002C0000) /*!< PLL input clock*13 */
+#define RCC_CFGR_PLLMUL14 ((uint32_t)0x00300000) /*!< PLL input clock*14 */
+#define RCC_CFGR_PLLMUL15 ((uint32_t)0x00340000) /*!< PLL input clock*15 */
+#define RCC_CFGR_PLLMUL16 ((uint32_t)0x00380000) /*!< PLL input clock*16 */
+
+/*!< MCO configuration */
+#define RCC_CFGR_MCO ((uint32_t)0x0F000000) /*!< MCO[3:0] bits (Microcontroller Clock Output) */
+#define RCC_CFGR_MCO_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define RCC_CFGR_MCO_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define RCC_CFGR_MCO_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+
+#define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
+#define RCC_CFGR_MCO_HSI14 ((uint32_t)0x01000000) /*!< HSI14 clock selected as MCO source */
+#define RCC_CFGR_MCO_LSI ((uint32_t)0x02000000) /*!< LSI clock selected as MCO source */
+#define RCC_CFGR_MCO_LSE ((uint32_t)0x03000000) /*!< LSE clock selected as MCO source */
+#define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x04000000) /*!< System clock selected as MCO source */
+#define RCC_CFGR_MCO_HSI ((uint32_t)0x05000000) /*!< HSI clock selected as MCO source */
+#define RCC_CFGR_MCO_HSE ((uint32_t)0x06000000) /*!< HSE clock selected as MCO source */
+#define RCC_CFGR_MCO_PLL ((uint32_t)0x07000000) /*!< PLL clock divided by 2 selected as MCO source */
+
+/*!<****************** Bit definition for RCC_CIR register *****************/
+#define RCC_CIR_LSIRDYF ((uint32_t)0x00000001) /*!< LSI Ready Interrupt flag */
+#define RCC_CIR_LSERDYF ((uint32_t)0x00000002) /*!< LSE Ready Interrupt flag */
+#define RCC_CIR_HSIRDYF ((uint32_t)0x00000004) /*!< HSI Ready Interrupt flag */
+#define RCC_CIR_HSERDYF ((uint32_t)0x00000008) /*!< HSE Ready Interrupt flag */
+#define RCC_CIR_PLLRDYF ((uint32_t)0x00000010) /*!< PLL Ready Interrupt flag */
+#define RCC_CIR_HSI14RDYF ((uint32_t)0x00000020) /*!< HSI14 Ready Interrupt flag */
+#define RCC_CIR_CSSF ((uint32_t)0x00000080) /*!< Clock Security System Interrupt flag */
+#define RCC_CIR_LSIRDYIE ((uint32_t)0x00000100) /*!< LSI Ready Interrupt Enable */
+#define RCC_CIR_LSERDYIE ((uint32_t)0x00000200) /*!< LSE Ready Interrupt Enable */
+#define RCC_CIR_HSIRDYIE ((uint32_t)0x00000400) /*!< HSI Ready Interrupt Enable */
+#define RCC_CIR_HSERDYIE ((uint32_t)0x00000800) /*!< HSE Ready Interrupt Enable */
+#define RCC_CIR_PLLRDYIE ((uint32_t)0x00001000) /*!< PLL Ready Interrupt Enable */
+#define RCC_CIR_HSI14RDYIE ((uint32_t)0x00002000) /*!< HSI14 Ready Interrupt Enable */
+#define RCC_CIR_LSIRDYC ((uint32_t)0x00010000) /*!< LSI Ready Interrupt Clear */
+#define RCC_CIR_LSERDYC ((uint32_t)0x00020000) /*!< LSE Ready Interrupt Clear */
+#define RCC_CIR_HSIRDYC ((uint32_t)0x00040000) /*!< HSI Ready Interrupt Clear */
+#define RCC_CIR_HSERDYC ((uint32_t)0x00080000) /*!< HSE Ready Interrupt Clear */
+#define RCC_CIR_PLLRDYC ((uint32_t)0x00100000) /*!< PLL Ready Interrupt Clear */
+#define RCC_CIR_HSI14RDYC ((uint32_t)0x00200000) /*!< HSI14 Ready Interrupt Clear */
+#define RCC_CIR_CSSC ((uint32_t)0x00800000) /*!< Clock Security System Interrupt Clear */
+
+/***************** Bit definition for RCC_APB2RSTR register ****************/
+#define RCC_APB2RSTR_SYSCFGRST ((uint32_t)0x00000001) /*!< SYSCFG clock reset */
+#define RCC_APB2RSTR_ADCRST ((uint32_t)0x00000200) /*!< ADC clock reset */
+#define RCC_APB2RSTR_TIM1RST ((uint32_t)0x00000800) /*!< TIM1 clock reset */
+#define RCC_APB2RSTR_SPI1RST ((uint32_t)0x00001000) /*!< SPI1 clock reset */
+#define RCC_APB2RSTR_USART1RST ((uint32_t)0x00004000) /*!< USART1 clock reset */
+#define RCC_APB2RSTR_TIM15RST ((uint32_t)0x00010000) /*!< TIM15 clock reset */
+#define RCC_APB2RSTR_TIM16RST ((uint32_t)0x00020000) /*!< TIM16 clock reset */
+#define RCC_APB2RSTR_TIM17RST ((uint32_t)0x00040000) /*!< TIM17 clock reset */
+#define RCC_APB2RSTR_DBGMCURST ((uint32_t)0x00400000) /*!< DBGMCU clock reset */
+
+/*!< Old ADC1 clock reset bit definition maintained for legacy purpose */
+#define RCC_APB2RSTR_ADC1RST RCC_APB2RSTR_ADCRST
+
+/***************** Bit definition for RCC_APB1RSTR register ****************/
+#define RCC_APB1RSTR_TIM2RST ((uint32_t)0x00000001) /*!< Timer 2 clock reset */
+#define RCC_APB1RSTR_TIM3RST ((uint32_t)0x00000002) /*!< Timer 3 clock reset */
+#define RCC_APB1RSTR_TIM6RST ((uint32_t)0x00000010) /*!< Timer 6 clock reset */
+#define RCC_APB1RSTR_TIM14RST ((uint32_t)0x00000100) /*!< Timer 14 clock reset */
+#define RCC_APB1RSTR_WWDGRST ((uint32_t)0x00000800) /*!< Window Watchdog clock reset */
+#define RCC_APB1RSTR_SPI2RST ((uint32_t)0x00004000) /*!< SPI2 clock reset */
+#define RCC_APB1RSTR_USART2RST ((uint32_t)0x00020000) /*!< USART 2 clock reset */
+#define RCC_APB1RSTR_I2C1RST ((uint32_t)0x00200000) /*!< I2C 1 clock reset */
+#define RCC_APB1RSTR_I2C2RST ((uint32_t)0x00400000) /*!< I2C 2 clock reset */
+#define RCC_APB1RSTR_PWRRST ((uint32_t)0x10000000) /*!< PWR clock reset */
+#define RCC_APB1RSTR_DACRST ((uint32_t)0x20000000) /*!< DAC clock reset */
+#define RCC_APB1RSTR_CECRST ((uint32_t)0x40000000) /*!< CEC clock reset */
+
+/****************** Bit definition for RCC_AHBENR register *****************/
+#define RCC_AHBENR_DMAEN ((uint32_t)0x00000001) /*!< DMA1 clock enable */
+#define RCC_AHBENR_SRAMEN ((uint32_t)0x00000004) /*!< SRAM interface clock enable */
+#define RCC_AHBENR_FLITFEN ((uint32_t)0x00000010) /*!< FLITF clock enable */
+#define RCC_AHBENR_CRCEN ((uint32_t)0x00000040) /*!< CRC clock enable */
+#define RCC_AHBENR_GPIOAEN ((uint32_t)0x00020000) /*!< GPIOA clock enable */
+#define RCC_AHBENR_GPIOBEN ((uint32_t)0x00040000) /*!< GPIOB clock enable */
+#define RCC_AHBENR_GPIOCEN ((uint32_t)0x00080000) /*!< GPIOC clock enable */
+#define RCC_AHBENR_GPIODEN ((uint32_t)0x00100000) /*!< GPIOD clock enable */
+#define RCC_AHBENR_GPIOFEN ((uint32_t)0x00400000) /*!< GPIOF clock enable */
+#define RCC_AHBENR_TSCEN ((uint32_t)0x01000000) /*!< TS controller clock enable */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_AHBENR_DMA1EN RCC_AHBENR_DMAEN /*!< DMA1 clock enable */
+#define RCC_AHBENR_TSEN RCC_AHBENR_TSCEN /*!< TS clock enable */
+
+/***************** Bit definition for RCC_APB2ENR register *****************/
+#define RCC_APB2ENR_SYSCFGCOMPEN ((uint32_t)0x00000001) /*!< SYSCFG and comparator clock enable */
+#define RCC_APB2ENR_ADCEN ((uint32_t)0x00000200) /*!< ADC1 clock enable */
+#define RCC_APB2ENR_TIM1EN ((uint32_t)0x00000800) /*!< TIM1 clock enable */
+#define RCC_APB2ENR_SPI1EN ((uint32_t)0x00001000) /*!< SPI1 clock enable */
+#define RCC_APB2ENR_USART1EN ((uint32_t)0x00004000) /*!< USART1 clock enable */
+#define RCC_APB2ENR_TIM15EN ((uint32_t)0x00010000) /*!< TIM15 clock enable */
+#define RCC_APB2ENR_TIM16EN ((uint32_t)0x00020000) /*!< TIM16 clock enable */
+#define RCC_APB2ENR_TIM17EN ((uint32_t)0x00040000) /*!< TIM17 clock enable */
+#define RCC_APB2ENR_DBGMCUEN ((uint32_t)0x00400000) /*!< DBGMCU clock enable */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_APB2ENR_SYSCFGEN RCC_APB2ENR_SYSCFGCOMPEN /*!< SYSCFG clock enable */
+#define RCC_APB2ENR_ADC1EN RCC_APB2ENR_ADCEN /*!< ADC1 clock enable */
+
+/***************** Bit definition for RCC_APB1ENR register *****************/
+#define RCC_APB1ENR_TIM2EN ((uint32_t)0x00000001) /*!< Timer 2 clock enable */
+#define RCC_APB1ENR_TIM3EN ((uint32_t)0x00000002) /*!< Timer 3 clock enable */
+#define RCC_APB1ENR_TIM6EN ((uint32_t)0x00000010) /*!< Timer 6 clock enable */
+#define RCC_APB1ENR_TIM14EN ((uint32_t)0x00000100) /*!< Timer 14 clock enable */
+#define RCC_APB1ENR_WWDGEN ((uint32_t)0x00000800) /*!< Window Watchdog clock enable */
+#define RCC_APB1ENR_SPI2EN ((uint32_t)0x00004000) /*!< SPI2 clock enable */
+#define RCC_APB1ENR_USART2EN ((uint32_t)0x00020000) /*!< USART2 clock enable */
+#define RCC_APB1ENR_I2C1EN ((uint32_t)0x00200000) /*!< I2C1 clock enable */
+#define RCC_APB1ENR_I2C2EN ((uint32_t)0x00400000) /*!< I2C2 clock enable */
+#define RCC_APB1ENR_PWREN ((uint32_t)0x10000000) /*!< PWR clock enable */
+#define RCC_APB1ENR_DACEN ((uint32_t)0x20000000) /*!< DAC clock enable */
+#define RCC_APB1ENR_CECEN ((uint32_t)0x40000000) /*!< CEC clock enable */
+
+/******************* Bit definition for RCC_BDCR register ******************/
+#define RCC_BDCR_LSEON ((uint32_t)0x00000001) /*!< External Low Speed oscillator enable */
+#define RCC_BDCR_LSERDY ((uint32_t)0x00000002) /*!< External Low Speed oscillator Ready */
+#define RCC_BDCR_LSEBYP ((uint32_t)0x00000004) /*!< External Low Speed oscillator Bypass */
+
+#define RCC_BDCR_LSEDRV ((uint32_t)0x00000018) /*!< LSEDRV[1:0] bits (LSE Osc. drive capability) */
+#define RCC_BDCR_LSEDRV_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define RCC_BDCR_LSEDRV_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+
+#define RCC_BDCR_RTCSEL ((uint32_t)0x00000300) /*!< RTCSEL[1:0] bits (RTC clock source selection) */
+#define RCC_BDCR_RTCSEL_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define RCC_BDCR_RTCSEL_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+
+/*!< RTC configuration */
+#define RCC_BDCR_RTCSEL_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
+#define RCC_BDCR_RTCSEL_LSE ((uint32_t)0x00000100) /*!< LSE oscillator clock used as RTC clock */
+#define RCC_BDCR_RTCSEL_LSI ((uint32_t)0x00000200) /*!< LSI oscillator clock used as RTC clock */
+#define RCC_BDCR_RTCSEL_HSE ((uint32_t)0x00000300) /*!< HSE oscillator clock divided by 128 used as RTC clock */
+
+#define RCC_BDCR_RTCEN ((uint32_t)0x00008000) /*!< RTC clock enable */
+#define RCC_BDCR_BDRST ((uint32_t)0x00010000) /*!< Backup domain software reset */
+
+/******************* Bit definition for RCC_CSR register *******************/
+#define RCC_CSR_LSION ((uint32_t)0x00000001) /*!< Internal Low Speed oscillator enable */
+#define RCC_CSR_LSIRDY ((uint32_t)0x00000002) /*!< Internal Low Speed oscillator Ready */
+#define RCC_CSR_V18PWRRSTF ((uint32_t)0x00800000) /*!< V1.8 power domain reset flag */
+#define RCC_CSR_RMVF ((uint32_t)0x01000000) /*!< Remove reset flag */
+#define RCC_CSR_OBLRSTF ((uint32_t)0x02000000) /*!< OBL reset flag */
+#define RCC_CSR_PINRSTF ((uint32_t)0x04000000) /*!< PIN reset flag */
+#define RCC_CSR_PORRSTF ((uint32_t)0x08000000) /*!< POR/PDR reset flag */
+#define RCC_CSR_SFTRSTF ((uint32_t)0x10000000) /*!< Software Reset flag */
+#define RCC_CSR_IWDGRSTF ((uint32_t)0x20000000) /*!< Independent Watchdog reset flag */
+#define RCC_CSR_WWDGRSTF ((uint32_t)0x40000000) /*!< Window watchdog reset flag */
+#define RCC_CSR_LPWRRSTF ((uint32_t)0x80000000) /*!< Low-Power reset flag */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_CSR_OBL RCC_CSR_OBLRSTF /*!< OBL reset flag */
+
+/******************* Bit definition for RCC_AHBRSTR register ***************/
+#define RCC_AHBRSTR_GPIOARST ((uint32_t)0x00020000) /*!< GPIOA clock reset */
+#define RCC_AHBRSTR_GPIOBRST ((uint32_t)0x00040000) /*!< GPIOB clock reset */
+#define RCC_AHBRSTR_GPIOCRST ((uint32_t)0x00080000) /*!< GPIOC clock reset */
+#define RCC_AHBRSTR_GPIODRST ((uint32_t)0x00100000) /*!< GPIOD clock reset */
+#define RCC_AHBRSTR_GPIOFRST ((uint32_t)0x00400000) /*!< GPIOF clock reset */
+#define RCC_AHBRSTR_TSCRST ((uint32_t)0x01000000) /*!< TS clock reset */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_AHBRSTR_TSRST RCC_AHBRSTR_TSCRST /*!< TS clock reset */
+
+/******************* Bit definition for RCC_CFGR2 register *****************/
+/*!< PREDIV configuration */
+#define RCC_CFGR2_PREDIV ((uint32_t)0x0000000F) /*!< PREDIV[3:0] bits */
+#define RCC_CFGR2_PREDIV_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR2_PREDIV_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define RCC_CFGR2_PREDIV_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define RCC_CFGR2_PREDIV_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+
+#define RCC_CFGR2_PREDIV_DIV1 ((uint32_t)0x00000000) /*!< PREDIV input clock not divided */
+#define RCC_CFGR2_PREDIV_DIV2 ((uint32_t)0x00000001) /*!< PREDIV input clock divided by 2 */
+#define RCC_CFGR2_PREDIV_DIV3 ((uint32_t)0x00000002) /*!< PREDIV input clock divided by 3 */
+#define RCC_CFGR2_PREDIV_DIV4 ((uint32_t)0x00000003) /*!< PREDIV input clock divided by 4 */
+#define RCC_CFGR2_PREDIV_DIV5 ((uint32_t)0x00000004) /*!< PREDIV input clock divided by 5 */
+#define RCC_CFGR2_PREDIV_DIV6 ((uint32_t)0x00000005) /*!< PREDIV input clock divided by 6 */
+#define RCC_CFGR2_PREDIV_DIV7 ((uint32_t)0x00000006) /*!< PREDIV input clock divided by 7 */
+#define RCC_CFGR2_PREDIV_DIV8 ((uint32_t)0x00000007) /*!< PREDIV input clock divided by 8 */
+#define RCC_CFGR2_PREDIV_DIV9 ((uint32_t)0x00000008) /*!< PREDIV input clock divided by 9 */
+#define RCC_CFGR2_PREDIV_DIV10 ((uint32_t)0x00000009) /*!< PREDIV input clock divided by 10 */
+#define RCC_CFGR2_PREDIV_DIV11 ((uint32_t)0x0000000A) /*!< PREDIV input clock divided by 11 */
+#define RCC_CFGR2_PREDIV_DIV12 ((uint32_t)0x0000000B) /*!< PREDIV input clock divided by 12 */
+#define RCC_CFGR2_PREDIV_DIV13 ((uint32_t)0x0000000C) /*!< PREDIV input clock divided by 13 */
+#define RCC_CFGR2_PREDIV_DIV14 ((uint32_t)0x0000000D) /*!< PREDIV input clock divided by 14 */
+#define RCC_CFGR2_PREDIV_DIV15 ((uint32_t)0x0000000E) /*!< PREDIV input clock divided by 15 */
+#define RCC_CFGR2_PREDIV_DIV16 ((uint32_t)0x0000000F) /*!< PREDIV input clock divided by 16 */
+
+/******************* Bit definition for RCC_CFGR3 register *****************/
+/*!< USART1 Clock source selection */
+#define RCC_CFGR3_USART1SW ((uint32_t)0x00000003) /*!< USART1SW[1:0] bits */
+#define RCC_CFGR3_USART1SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR3_USART1SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+#define RCC_CFGR3_USART1SW_PCLK ((uint32_t)0x00000000) /*!< PCLK clock used as USART1 clock source */
+#define RCC_CFGR3_USART1SW_SYSCLK ((uint32_t)0x00000001) /*!< System clock selected as USART1 clock source */
+#define RCC_CFGR3_USART1SW_LSE ((uint32_t)0x00000002) /*!< LSE oscillator clock used as USART1 clock source */
+#define RCC_CFGR3_USART1SW_HSI ((uint32_t)0x00000003) /*!< HSI oscillator clock used as USART1 clock source */
+
+/*!< I2C1 Clock source selection */
+#define RCC_CFGR3_I2C1SW ((uint32_t)0x00000010) /*!< I2C1SW bits */
+
+#define RCC_CFGR3_I2C1SW_HSI ((uint32_t)0x00000000) /*!< HSI oscillator clock used as I2C1 clock source */
+#define RCC_CFGR3_I2C1SW_SYSCLK ((uint32_t)0x00000010) /*!< System clock selected as I2C1 clock source */
+
+/*!< CEC Clock source selection */
+#define RCC_CFGR3_CECSW ((uint32_t)0x00000040) /*!< CECSW bits */
+
+#define RCC_CFGR3_CECSW_HSI_DIV244 ((uint32_t)0x00000000) /*!< HSI clock divided by 244 selected as HDMI CEC entry clock source */
+#define RCC_CFGR3_CECSW_LSE ((uint32_t)0x00000040) /*!< LSE clock selected as HDMI CEC entry clock source */
+
+/*!< USART2 Clock source selection */
+#define RCC_CFGR3_USART2SW ((uint32_t)0x00030000) /*!< USART2SW[1:0] bits */
+#define RCC_CFGR3_USART2SW_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define RCC_CFGR3_USART2SW_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+
+#define RCC_CFGR3_USART2SW_PCLK ((uint32_t)0x00000000) /*!< PCLK clock used as USART2 clock source */
+#define RCC_CFGR3_USART2SW_SYSCLK ((uint32_t)0x00010000) /*!< System clock selected as USART2 clock source */
+#define RCC_CFGR3_USART2SW_LSE ((uint32_t)0x00020000) /*!< LSE oscillator clock used as USART2 clock source */
+#define RCC_CFGR3_USART2SW_HSI ((uint32_t)0x00030000) /*!< HSI oscillator clock used as USART2 clock source */
+
+/******************* Bit definition for RCC_CR2 register *******************/
+#define RCC_CR2_HSI14ON ((uint32_t)0x00000001) /*!< Internal High Speed 14MHz clock enable */
+#define RCC_CR2_HSI14RDY ((uint32_t)0x00000002) /*!< Internal High Speed 14MHz clock ready flag */
+#define RCC_CR2_HSI14DIS ((uint32_t)0x00000004) /*!< Internal High Speed 14MHz clock disable */
+#define RCC_CR2_HSI14TRIM ((uint32_t)0x000000F8) /*!< Internal High Speed 14MHz clock trimming */
+#define RCC_CR2_HSI14CAL ((uint32_t)0x0000FF00) /*!< Internal High Speed 14MHz clock Calibration */
+
+/*****************************************************************************/
+/* */
+/* Real-Time Clock (RTC) */
+/* */
+/*****************************************************************************/
+/******************** Bits definition for RTC_TR register ******************/
+#define RTC_TR_PM ((uint32_t)0x00400000)
+#define RTC_TR_HT ((uint32_t)0x00300000)
+#define RTC_TR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TR_HU ((uint32_t)0x000F0000)
+#define RTC_TR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TR_MNT ((uint32_t)0x00007000)
+#define RTC_TR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TR_MNU ((uint32_t)0x00000F00)
+#define RTC_TR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TR_ST ((uint32_t)0x00000070)
+#define RTC_TR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TR_SU ((uint32_t)0x0000000F)
+#define RTC_TR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_DR register ******************/
+#define RTC_DR_YT ((uint32_t)0x00F00000)
+#define RTC_DR_YT_0 ((uint32_t)0x00100000)
+#define RTC_DR_YT_1 ((uint32_t)0x00200000)
+#define RTC_DR_YT_2 ((uint32_t)0x00400000)
+#define RTC_DR_YT_3 ((uint32_t)0x00800000)
+#define RTC_DR_YU ((uint32_t)0x000F0000)
+#define RTC_DR_YU_0 ((uint32_t)0x00010000)
+#define RTC_DR_YU_1 ((uint32_t)0x00020000)
+#define RTC_DR_YU_2 ((uint32_t)0x00040000)
+#define RTC_DR_YU_3 ((uint32_t)0x00080000)
+#define RTC_DR_WDU ((uint32_t)0x0000E000)
+#define RTC_DR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_DR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_DR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_DR_MT ((uint32_t)0x00001000)
+#define RTC_DR_MU ((uint32_t)0x00000F00)
+#define RTC_DR_MU_0 ((uint32_t)0x00000100)
+#define RTC_DR_MU_1 ((uint32_t)0x00000200)
+#define RTC_DR_MU_2 ((uint32_t)0x00000400)
+#define RTC_DR_MU_3 ((uint32_t)0x00000800)
+#define RTC_DR_DT ((uint32_t)0x00000030)
+#define RTC_DR_DT_0 ((uint32_t)0x00000010)
+#define RTC_DR_DT_1 ((uint32_t)0x00000020)
+#define RTC_DR_DU ((uint32_t)0x0000000F)
+#define RTC_DR_DU_0 ((uint32_t)0x00000001)
+#define RTC_DR_DU_1 ((uint32_t)0x00000002)
+#define RTC_DR_DU_2 ((uint32_t)0x00000004)
+#define RTC_DR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_CR register ******************/
+#define RTC_CR_COE ((uint32_t)0x00800000)
+#define RTC_CR_OSEL ((uint32_t)0x00600000)
+#define RTC_CR_OSEL_0 ((uint32_t)0x00200000)
+#define RTC_CR_OSEL_1 ((uint32_t)0x00400000)
+#define RTC_CR_POL ((uint32_t)0x00100000)
+#define RTC_CR_COSEL ((uint32_t)0x00080000)
+#define RTC_CR_BCK ((uint32_t)0x00040000)
+#define RTC_CR_SUB1H ((uint32_t)0x00020000)
+#define RTC_CR_ADD1H ((uint32_t)0x00010000)
+#define RTC_CR_TSIE ((uint32_t)0x00008000)
+#define RTC_CR_ALRAIE ((uint32_t)0x00001000)
+#define RTC_CR_TSE ((uint32_t)0x00000800)
+#define RTC_CR_ALRAE ((uint32_t)0x00000100)
+#define RTC_CR_FMT ((uint32_t)0x00000040)
+#define RTC_CR_BYPSHAD ((uint32_t)0x00000020)
+#define RTC_CR_REFCKON ((uint32_t)0x00000010)
+#define RTC_CR_TSEDGE ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_ISR register *****************/
+#define RTC_ISR_RECALPF ((uint32_t)0x00010000)
+#define RTC_ISR_TAMP2F ((uint32_t)0x00004000)
+#define RTC_ISR_TAMP1F ((uint32_t)0x00002000)
+#define RTC_ISR_TSOVF ((uint32_t)0x00001000)
+#define RTC_ISR_TSF ((uint32_t)0x00000800)
+#define RTC_ISR_ALRAF ((uint32_t)0x00000100)
+#define RTC_ISR_INIT ((uint32_t)0x00000080)
+#define RTC_ISR_INITF ((uint32_t)0x00000040)
+#define RTC_ISR_RSF ((uint32_t)0x00000020)
+#define RTC_ISR_INITS ((uint32_t)0x00000010)
+#define RTC_ISR_SHPF ((uint32_t)0x00000008)
+#define RTC_ISR_ALRAWF ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_PRER register ****************/
+#define RTC_PRER_PREDIV_A ((uint32_t)0x007F0000)
+#define RTC_PRER_PREDIV_S ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_ALRMAR register **************/
+#define RTC_ALRMAR_MSK4 ((uint32_t)0x80000000)
+#define RTC_ALRMAR_WDSEL ((uint32_t)0x40000000)
+#define RTC_ALRMAR_DT ((uint32_t)0x30000000)
+#define RTC_ALRMAR_DT_0 ((uint32_t)0x10000000)
+#define RTC_ALRMAR_DT_1 ((uint32_t)0x20000000)
+#define RTC_ALRMAR_DU ((uint32_t)0x0F000000)
+#define RTC_ALRMAR_DU_0 ((uint32_t)0x01000000)
+#define RTC_ALRMAR_DU_1 ((uint32_t)0x02000000)
+#define RTC_ALRMAR_DU_2 ((uint32_t)0x04000000)
+#define RTC_ALRMAR_DU_3 ((uint32_t)0x08000000)
+#define RTC_ALRMAR_MSK3 ((uint32_t)0x00800000)
+#define RTC_ALRMAR_PM ((uint32_t)0x00400000)
+#define RTC_ALRMAR_HT ((uint32_t)0x00300000)
+#define RTC_ALRMAR_HT_0 ((uint32_t)0x00100000)
+#define RTC_ALRMAR_HT_1 ((uint32_t)0x00200000)
+#define RTC_ALRMAR_HU ((uint32_t)0x000F0000)
+#define RTC_ALRMAR_HU_0 ((uint32_t)0x00010000)
+#define RTC_ALRMAR_HU_1 ((uint32_t)0x00020000)
+#define RTC_ALRMAR_HU_2 ((uint32_t)0x00040000)
+#define RTC_ALRMAR_HU_3 ((uint32_t)0x00080000)
+#define RTC_ALRMAR_MSK2 ((uint32_t)0x00008000)
+#define RTC_ALRMAR_MNT ((uint32_t)0x00007000)
+#define RTC_ALRMAR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_ALRMAR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_ALRMAR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_ALRMAR_MNU ((uint32_t)0x00000F00)
+#define RTC_ALRMAR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_ALRMAR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_ALRMAR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_ALRMAR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_ALRMAR_MSK1 ((uint32_t)0x00000080)
+#define RTC_ALRMAR_ST ((uint32_t)0x00000070)
+#define RTC_ALRMAR_ST_0 ((uint32_t)0x00000010)
+#define RTC_ALRMAR_ST_1 ((uint32_t)0x00000020)
+#define RTC_ALRMAR_ST_2 ((uint32_t)0x00000040)
+#define RTC_ALRMAR_SU ((uint32_t)0x0000000F)
+#define RTC_ALRMAR_SU_0 ((uint32_t)0x00000001)
+#define RTC_ALRMAR_SU_1 ((uint32_t)0x00000002)
+#define RTC_ALRMAR_SU_2 ((uint32_t)0x00000004)
+#define RTC_ALRMAR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_WPR register *****************/
+#define RTC_WPR_KEY ((uint32_t)0x000000FF)
+
+/******************** Bits definition for RTC_SSR register *****************/
+#define RTC_SSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_SHIFTR register **************/
+#define RTC_SHIFTR_SUBFS ((uint32_t)0x00007FFF)
+#define RTC_SHIFTR_ADD1S ((uint32_t)0x80000000)
+
+/******************** Bits definition for RTC_TSTR register ****************/
+#define RTC_TSTR_PM ((uint32_t)0x00400000)
+#define RTC_TSTR_HT ((uint32_t)0x00300000)
+#define RTC_TSTR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TSTR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TSTR_HU ((uint32_t)0x000F0000)
+#define RTC_TSTR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TSTR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TSTR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TSTR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TSTR_MNT ((uint32_t)0x00007000)
+#define RTC_TSTR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TSTR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TSTR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TSTR_MNU ((uint32_t)0x00000F00)
+#define RTC_TSTR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TSTR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TSTR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TSTR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TSTR_ST ((uint32_t)0x00000070)
+#define RTC_TSTR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TSTR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TSTR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TSTR_SU ((uint32_t)0x0000000F)
+#define RTC_TSTR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TSTR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TSTR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TSTR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSDR register ****************/
+#define RTC_TSDR_WDU ((uint32_t)0x0000E000)
+#define RTC_TSDR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_TSDR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_TSDR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_TSDR_MT ((uint32_t)0x00001000)
+#define RTC_TSDR_MU ((uint32_t)0x00000F00)
+#define RTC_TSDR_MU_0 ((uint32_t)0x00000100)
+#define RTC_TSDR_MU_1 ((uint32_t)0x00000200)
+#define RTC_TSDR_MU_2 ((uint32_t)0x00000400)
+#define RTC_TSDR_MU_3 ((uint32_t)0x00000800)
+#define RTC_TSDR_DT ((uint32_t)0x00000030)
+#define RTC_TSDR_DT_0 ((uint32_t)0x00000010)
+#define RTC_TSDR_DT_1 ((uint32_t)0x00000020)
+#define RTC_TSDR_DU ((uint32_t)0x0000000F)
+#define RTC_TSDR_DU_0 ((uint32_t)0x00000001)
+#define RTC_TSDR_DU_1 ((uint32_t)0x00000002)
+#define RTC_TSDR_DU_2 ((uint32_t)0x00000004)
+#define RTC_TSDR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSSSR register ***************/
+#define RTC_TSSSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_CALR register ****************/
+#define RTC_CALR_CALP ((uint32_t)0x00008000)
+#define RTC_CALR_CALW8 ((uint32_t)0x00004000)
+#define RTC_CALR_CALW16 ((uint32_t)0x00002000)
+#define RTC_CALR_CALM ((uint32_t)0x000001FF)
+#define RTC_CALR_CALM_0 ((uint32_t)0x00000001)
+#define RTC_CALR_CALM_1 ((uint32_t)0x00000002)
+#define RTC_CALR_CALM_2 ((uint32_t)0x00000004)
+#define RTC_CALR_CALM_3 ((uint32_t)0x00000008)
+#define RTC_CALR_CALM_4 ((uint32_t)0x00000010)
+#define RTC_CALR_CALM_5 ((uint32_t)0x00000020)
+#define RTC_CALR_CALM_6 ((uint32_t)0x00000040)
+#define RTC_CALR_CALM_7 ((uint32_t)0x00000080)
+#define RTC_CALR_CALM_8 ((uint32_t)0x00000100)
+
+/******************** Bits definition for RTC_TAFCR register ***************/
+#define RTC_TAFCR_ALARMOUTTYPE ((uint32_t)0x00040000)
+#define RTC_TAFCR_TAMPPUDIS ((uint32_t)0x00008000)
+#define RTC_TAFCR_TAMPPRCH ((uint32_t)0x00006000)
+#define RTC_TAFCR_TAMPPRCH_0 ((uint32_t)0x00002000)
+#define RTC_TAFCR_TAMPPRCH_1 ((uint32_t)0x00004000)
+#define RTC_TAFCR_TAMPFLT ((uint32_t)0x00001800)
+#define RTC_TAFCR_TAMPFLT_0 ((uint32_t)0x00000800)
+#define RTC_TAFCR_TAMPFLT_1 ((uint32_t)0x00001000)
+#define RTC_TAFCR_TAMPFREQ ((uint32_t)0x00000700)
+#define RTC_TAFCR_TAMPFREQ_0 ((uint32_t)0x00000100)
+#define RTC_TAFCR_TAMPFREQ_1 ((uint32_t)0x00000200)
+#define RTC_TAFCR_TAMPFREQ_2 ((uint32_t)0x00000400)
+#define RTC_TAFCR_TAMPTS ((uint32_t)0x00000080)
+#define RTC_TAFCR_TAMP2TRG ((uint32_t)0x00000010)
+#define RTC_TAFCR_TAMP2E ((uint32_t)0x00000008)
+#define RTC_TAFCR_TAMPIE ((uint32_t)0x00000004)
+#define RTC_TAFCR_TAMP1TRG ((uint32_t)0x00000002)
+#define RTC_TAFCR_TAMP1E ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_ALRMASSR register ************/
+#define RTC_ALRMASSR_MASKSS ((uint32_t)0x0F000000)
+#define RTC_ALRMASSR_MASKSS_0 ((uint32_t)0x01000000)
+#define RTC_ALRMASSR_MASKSS_1 ((uint32_t)0x02000000)
+#define RTC_ALRMASSR_MASKSS_2 ((uint32_t)0x04000000)
+#define RTC_ALRMASSR_MASKSS_3 ((uint32_t)0x08000000)
+#define RTC_ALRMASSR_SS ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_BKP0R register ***************/
+#define RTC_BKP0R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP1R register ***************/
+#define RTC_BKP1R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP2R register ***************/
+#define RTC_BKP2R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP3R register ***************/
+#define RTC_BKP3R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP4R register ***************/
+#define RTC_BKP4R ((uint32_t)0xFFFFFFFF)
+
+/******************** Number of backup registers ******************************/
+#define RTC_BKP_NUMBER ((uint32_t)0x00000005)
+
+/*****************************************************************************/
+/* */
+/* Serial Peripheral Interface (SPI) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for SPI_CR1 register *******************/
+#define SPI_CR1_CPHA ((uint32_t)0x00000001) /*!< Clock Phase */
+#define SPI_CR1_CPOL ((uint32_t)0x00000002) /*!< Clock Polarity */
+#define SPI_CR1_MSTR ((uint32_t)0x00000004) /*!< Master Selection */
+#define SPI_CR1_BR ((uint32_t)0x00000038) /*!< BR[2:0] bits (Baud Rate Control) */
+#define SPI_CR1_BR_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define SPI_CR1_BR_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define SPI_CR1_BR_2 ((uint32_t)0x00000020) /*!< Bit 2 */
+#define SPI_CR1_SPE ((uint32_t)0x00000040) /*!< SPI Enable */
+#define SPI_CR1_LSBFIRST ((uint32_t)0x00000080) /*!< Frame Format */
+#define SPI_CR1_SSI ((uint32_t)0x00000100) /*!< Internal slave select */
+#define SPI_CR1_SSM ((uint32_t)0x00000200) /*!< Software slave management */
+#define SPI_CR1_RXONLY ((uint32_t)0x00000400) /*!< Receive only */
+#define SPI_CR1_CRCL ((uint32_t)0x00000800) /*!< CRC Length */
+#define SPI_CR1_CRCNEXT ((uint32_t)0x00001000) /*!< Transmit CRC next */
+#define SPI_CR1_CRCEN ((uint32_t)0x00002000) /*!< Hardware CRC calculation enable */
+#define SPI_CR1_BIDIOE ((uint32_t)0x00004000) /*!< Output enable in bidirectional mode */
+#define SPI_CR1_BIDIMODE ((uint32_t)0x00008000) /*!< Bidirectional data mode enable */
+
+/******************* Bit definition for SPI_CR2 register *******************/
+#define SPI_CR2_RXDMAEN ((uint32_t)0x00000001) /*!< Rx Buffer DMA Enable */
+#define SPI_CR2_TXDMAEN ((uint32_t)0x00000002) /*!< Tx Buffer DMA Enable */
+#define SPI_CR2_SSOE ((uint32_t)0x00000004) /*!< SS Output Enable */
+#define SPI_CR2_NSSP ((uint32_t)0x00000008) /*!< NSS pulse management Enable */
+#define SPI_CR2_FRF ((uint32_t)0x00000010) /*!< Frame Format Enable */
+#define SPI_CR2_ERRIE ((uint32_t)0x00000020) /*!< Error Interrupt Enable */
+#define SPI_CR2_RXNEIE ((uint32_t)0x00000040) /*!< RX buffer Not Empty Interrupt Enable */
+#define SPI_CR2_TXEIE ((uint32_t)0x00000080) /*!< Tx buffer Empty Interrupt Enable */
+#define SPI_CR2_DS ((uint32_t)0x00000F00) /*!< DS[3:0] Data Size */
+#define SPI_CR2_DS_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define SPI_CR2_DS_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define SPI_CR2_DS_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define SPI_CR2_DS_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+#define SPI_CR2_FRXTH ((uint32_t)0x00001000) /*!< FIFO reception Threshold */
+#define SPI_CR2_LDMARX ((uint32_t)0x00002000) /*!< Last DMA transfer for reception */
+#define SPI_CR2_LDMATX ((uint32_t)0x00004000) /*!< Last DMA transfer for transmission */
+
+/******************** Bit definition for SPI_SR register *******************/
+#define SPI_SR_RXNE ((uint32_t)0x00000001) /*!< Receive buffer Not Empty */
+#define SPI_SR_TXE ((uint32_t)0x00000002) /*!< Transmit buffer Empty */
+#define SPI_SR_CHSIDE ((uint32_t)0x00000004) /*!< Channel side */
+#define SPI_SR_UDR ((uint32_t)0x00000008) /*!< Underrun flag */
+#define SPI_SR_CRCERR ((uint32_t)0x00000010) /*!< CRC Error flag */
+#define SPI_SR_MODF ((uint32_t)0x00000020) /*!< Mode fault */
+#define SPI_SR_OVR ((uint32_t)0x00000040) /*!< Overrun flag */
+#define SPI_SR_BSY ((uint32_t)0x00000080) /*!< Busy flag */
+#define SPI_SR_FRE ((uint32_t)0x00000100) /*!< TI frame format error */
+#define SPI_SR_FRLVL ((uint32_t)0x00000600) /*!< FIFO Reception Level */
+#define SPI_SR_FRLVL_0 ((uint32_t)0x00000200) /*!< Bit 0 */
+#define SPI_SR_FRLVL_1 ((uint32_t)0x00000400) /*!< Bit 1 */
+#define SPI_SR_FTLVL ((uint32_t)0x00001800) /*!< FIFO Transmission Level */
+#define SPI_SR_FTLVL_0 ((uint32_t)0x00000800) /*!< Bit 0 */
+#define SPI_SR_FTLVL_1 ((uint32_t)0x00001000) /*!< Bit 1 */
+
+/******************** Bit definition for SPI_DR register *******************/
+#define SPI_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data Register */
+
+/******************* Bit definition for SPI_CRCPR register *****************/
+#define SPI_CRCPR_CRCPOLY ((uint32_t)0xFFFFFFFF) /*!< CRC polynomial register */
+
+/****************** Bit definition for SPI_RXCRCR register *****************/
+#define SPI_RXCRCR_RXCRC ((uint32_t)0xFFFFFFFF) /*!< Rx CRC Register */
+
+/****************** Bit definition for SPI_TXCRCR register *****************/
+#define SPI_TXCRCR_TXCRC ((uint32_t)0xFFFFFFFF) /*!< Tx CRC Register */
+
+/****************** Bit definition for SPI_I2SCFGR register ****************/
+#define SPI_I2SCFGR_CHLEN ((uint32_t)0x00000001) /*!<Channel length (number of bits per audio channel) */
+#define SPI_I2SCFGR_DATLEN ((uint32_t)0x00000006) /*!<DATLEN[1:0] bits (Data length to be transferred) */
+#define SPI_I2SCFGR_DATLEN_0 ((uint32_t)0x00000002) /*!<Bit 0 */
+#define SPI_I2SCFGR_DATLEN_1 ((uint32_t)0x00000004) /*!<Bit 1 */
+#define SPI_I2SCFGR_CKPOL ((uint32_t)0x00000008) /*!<steady state clock polarity */
+#define SPI_I2SCFGR_I2SSTD ((uint32_t)0x00000030) /*!<I2SSTD[1:0] bits (I2S standard selection) */
+#define SPI_I2SCFGR_I2SSTD_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SSTD_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define SPI_I2SCFGR_PCMSYNC ((uint32_t)0x00000080) /*!<PCM frame synchronization */
+#define SPI_I2SCFGR_I2SCFG ((uint32_t)0x00000300) /*!<I2SCFG[1:0] bits (I2S configuration mode) */
+#define SPI_I2SCFGR_I2SCFG_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SCFG_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define SPI_I2SCFGR_I2SE ((uint32_t)0x00000400) /*!<I2S Enable */
+#define SPI_I2SCFGR_I2SMOD ((uint32_t)0x00000800) /*!<I2S mode selection */
+
+/****************** Bit definition for SPI_I2SPR register ******************/
+#define SPI_I2SPR_I2SDIV ((uint32_t)0x000000FF) /*!<I2S Linear prescaler */
+#define SPI_I2SPR_ODD ((uint32_t)0x00000100) /*!<Odd factor for the prescaler */
+#define SPI_I2SPR_MCKOE ((uint32_t)0x00000200) /*!<Master Clock Output Enable */
+
+/*****************************************************************************/
+/* */
+/* System Configuration (SYSCFG) */
+/* */
+/*****************************************************************************/
+/***************** Bit definition for SYSCFG_CFGR1 register ****************/
+#define SYSCFG_CFGR1_MEM_MODE ((uint32_t)0x00000003) /*!< SYSCFG_Memory Remap Config */
+#define SYSCFG_CFGR1_MEM_MODE_0 ((uint32_t)0x00000001) /*!< SYSCFG_Memory Remap Config Bit 0 */
+#define SYSCFG_CFGR1_MEM_MODE_1 ((uint32_t)0x00000002) /*!< SYSCFG_Memory Remap Config Bit 1 */
+
+#define SYSCFG_CFGR1_DMA_RMP ((uint32_t)0x00001F00) /*!< DMA remap mask */
+#define SYSCFG_CFGR1_ADC_DMA_RMP ((uint32_t)0x00000100) /*!< ADC DMA remap */
+#define SYSCFG_CFGR1_USART1TX_DMA_RMP ((uint32_t)0x00000200) /*!< USART1 TX DMA remap */
+#define SYSCFG_CFGR1_USART1RX_DMA_RMP ((uint32_t)0x00000400) /*!< USART1 RX DMA remap */
+#define SYSCFG_CFGR1_TIM16_DMA_RMP ((uint32_t)0x00000800) /*!< Timer 16 DMA remap */
+#define SYSCFG_CFGR1_TIM17_DMA_RMP ((uint32_t)0x00001000) /*!< Timer 17 DMA remap */
+
+#define SYSCFG_CFGR1_I2C_FMP_PB6 ((uint32_t)0x00010000) /*!< I2C PB6 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB7 ((uint32_t)0x00020000) /*!< I2C PB7 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB8 ((uint32_t)0x00040000) /*!< I2C PB8 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB9 ((uint32_t)0x00080000) /*!< I2C PB9 Fast mode plus */
+
+/***************** Bit definition for SYSCFG_EXTICR1 register **************/
+#define SYSCFG_EXTICR1_EXTI0 ((uint16_t)0x000F) /*!< EXTI 0 configuration */
+#define SYSCFG_EXTICR1_EXTI1 ((uint16_t)0x00F0) /*!< EXTI 1 configuration */
+#define SYSCFG_EXTICR1_EXTI2 ((uint16_t)0x0F00) /*!< EXTI 2 configuration */
+#define SYSCFG_EXTICR1_EXTI3 ((uint16_t)0xF000) /*!< EXTI 3 configuration */
+
+/**
+ * @brief EXTI0 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI0_PA ((uint16_t)0x0000) /*!< PA[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PB ((uint16_t)0x0001) /*!< PB[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PC ((uint16_t)0x0002) /*!< PC[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PD ((uint16_t)0x0003) /*!< PD[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PF ((uint16_t)0x0005) /*!< PF[0] pin */
+
+/**
+ * @brief EXTI1 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI1_PA ((uint16_t)0x0000) /*!< PA[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PB ((uint16_t)0x0010) /*!< PB[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PC ((uint16_t)0x0020) /*!< PC[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PD ((uint16_t)0x0030) /*!< PD[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PF ((uint16_t)0x0050) /*!< PF[1] pin */
+
+/**
+ * @brief EXTI2 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI2_PA ((uint16_t)0x0000) /*!< PA[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PB ((uint16_t)0x0100) /*!< PB[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PC ((uint16_t)0x0200) /*!< PC[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PD ((uint16_t)0x0300) /*!< PD[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PF ((uint16_t)0x0500) /*!< PF[2] pin */
+
+/**
+ * @brief EXTI3 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI3_PA ((uint16_t)0x0000) /*!< PA[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PB ((uint16_t)0x1000) /*!< PB[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PC ((uint16_t)0x2000) /*!< PC[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PD ((uint16_t)0x3000) /*!< PD[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PF ((uint16_t)0x5000) /*!< PF[3] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR2 register **************/
+#define SYSCFG_EXTICR2_EXTI4 ((uint16_t)0x000F) /*!< EXTI 4 configuration */
+#define SYSCFG_EXTICR2_EXTI5 ((uint16_t)0x00F0) /*!< EXTI 5 configuration */
+#define SYSCFG_EXTICR2_EXTI6 ((uint16_t)0x0F00) /*!< EXTI 6 configuration */
+#define SYSCFG_EXTICR2_EXTI7 ((uint16_t)0xF000) /*!< EXTI 7 configuration */
+
+/**
+ * @brief EXTI4 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI4_PA ((uint16_t)0x0000) /*!< PA[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PB ((uint16_t)0x0001) /*!< PB[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PC ((uint16_t)0x0002) /*!< PC[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PD ((uint16_t)0x0003) /*!< PD[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PF ((uint16_t)0x0005) /*!< PF[4] pin */
+
+/**
+ * @brief EXTI5 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI5_PA ((uint16_t)0x0000) /*!< PA[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PB ((uint16_t)0x0010) /*!< PB[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PC ((uint16_t)0x0020) /*!< PC[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PD ((uint16_t)0x0030) /*!< PD[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PF ((uint16_t)0x0050) /*!< PF[5] pin */
+
+/**
+ * @brief EXTI6 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI6_PA ((uint16_t)0x0000) /*!< PA[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PB ((uint16_t)0x0100) /*!< PB[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PC ((uint16_t)0x0200) /*!< PC[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PD ((uint16_t)0x0300) /*!< PD[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PF ((uint16_t)0x0500) /*!< PF[6] pin */
+
+/**
+ * @brief EXTI7 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI7_PA ((uint16_t)0x0000) /*!< PA[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PB ((uint16_t)0x1000) /*!< PB[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PC ((uint16_t)0x2000) /*!< PC[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PD ((uint16_t)0x3000) /*!< PD[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PF ((uint16_t)0x5000) /*!< PF[7] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR3 register **************/
+#define SYSCFG_EXTICR3_EXTI8 ((uint16_t)0x000F) /*!< EXTI 8 configuration */
+#define SYSCFG_EXTICR3_EXTI9 ((uint16_t)0x00F0) /*!< EXTI 9 configuration */
+#define SYSCFG_EXTICR3_EXTI10 ((uint16_t)0x0F00) /*!< EXTI 10 configuration */
+#define SYSCFG_EXTICR3_EXTI11 ((uint16_t)0xF000) /*!< EXTI 11 configuration */
+
+/**
+ * @brief EXTI8 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI8_PA ((uint16_t)0x0000) /*!< PA[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PB ((uint16_t)0x0001) /*!< PB[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PC ((uint16_t)0x0002) /*!< PC[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PD ((uint16_t)0x0003) /*!< PD[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PF ((uint16_t)0x0005) /*!< PF[8] pin */
+
+/**
+ * @brief EXTI9 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI9_PA ((uint16_t)0x0000) /*!< PA[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PB ((uint16_t)0x0010) /*!< PB[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PC ((uint16_t)0x0020) /*!< PC[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PD ((uint16_t)0x0030) /*!< PD[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PF ((uint16_t)0x0050) /*!< PF[9] pin */
+
+/**
+ * @brief EXTI10 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI10_PA ((uint16_t)0x0000) /*!< PA[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PB ((uint16_t)0x0100) /*!< PB[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PC ((uint16_t)0x0200) /*!< PC[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PD ((uint16_t)0x0300) /*!< PD[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PF ((uint16_t)0x0500) /*!< PF[10] pin */
+
+/**
+ * @brief EXTI11 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI11_PA ((uint16_t)0x0000) /*!< PA[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PB ((uint16_t)0x1000) /*!< PB[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PC ((uint16_t)0x2000) /*!< PC[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PD ((uint16_t)0x3000) /*!< PD[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PF ((uint16_t)0x5000) /*!< PF[11] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR4 register **************/
+#define SYSCFG_EXTICR4_EXTI12 ((uint16_t)0x000F) /*!< EXTI 12 configuration */
+#define SYSCFG_EXTICR4_EXTI13 ((uint16_t)0x00F0) /*!< EXTI 13 configuration */
+#define SYSCFG_EXTICR4_EXTI14 ((uint16_t)0x0F00) /*!< EXTI 14 configuration */
+#define SYSCFG_EXTICR4_EXTI15 ((uint16_t)0xF000) /*!< EXTI 15 configuration */
+
+/**
+ * @brief EXTI12 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI12_PA ((uint16_t)0x0000) /*!< PA[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PB ((uint16_t)0x0001) /*!< PB[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PC ((uint16_t)0x0002) /*!< PC[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PD ((uint16_t)0x0003) /*!< PD[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PF ((uint16_t)0x0005) /*!< PF[12] pin */
+
+/**
+ * @brief EXTI13 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI13_PA ((uint16_t)0x0000) /*!< PA[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PB ((uint16_t)0x0010) /*!< PB[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PC ((uint16_t)0x0020) /*!< PC[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PD ((uint16_t)0x0030) /*!< PD[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PF ((uint16_t)0x0050) /*!< PF[13] pin */
+
+/**
+ * @brief EXTI14 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI14_PA ((uint16_t)0x0000) /*!< PA[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PB ((uint16_t)0x0100) /*!< PB[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PC ((uint16_t)0x0200) /*!< PC[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PD ((uint16_t)0x0300) /*!< PD[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PF ((uint16_t)0x0500) /*!< PF[14] pin */
+
+/**
+ * @brief EXTI15 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI15_PA ((uint16_t)0x0000) /*!< PA[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PB ((uint16_t)0x1000) /*!< PB[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PC ((uint16_t)0x2000) /*!< PC[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PD ((uint16_t)0x3000) /*!< PD[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PF ((uint16_t)0x5000) /*!< PF[15] pin */
+
+/***************** Bit definition for SYSCFG_CFGR2 register ****************/
+#define SYSCFG_CFGR2_LOCKUP_LOCK ((uint32_t)0x00000001) /*!< Enables and locks the LOCKUP (Hardfault) output of CortexM0 with Break Input of TIMER1 */
+#define SYSCFG_CFGR2_SRAM_PARITY_LOCK ((uint32_t)0x00000002) /*!< Enables and locks the SRAM_PARITY error signal with Break Input of TIMER1 */
+#define SYSCFG_CFGR2_SRAM_PEF ((uint32_t)0x00000100) /*!< SRAM Parity error flag */
+#define SYSCFG_CFGR2_SRAM_PE SYSCFG_CFGR2_SRAM_PEF /*!< SRAM Parity error flag (define maintained for legacy purpose) */
+
+/*****************************************************************************/
+/* */
+/* Timers (TIM) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for TIM_CR1 register *******************/
+#define TIM_CR1_CEN ((uint32_t)0x00000001) /*!<Counter enable */
+#define TIM_CR1_UDIS ((uint32_t)0x00000002) /*!<Update disable */
+#define TIM_CR1_URS ((uint32_t)0x00000004) /*!<Update request source */
+#define TIM_CR1_OPM ((uint32_t)0x00000008) /*!<One pulse mode */
+#define TIM_CR1_DIR ((uint32_t)0x00000010) /*!<Direction */
+
+#define TIM_CR1_CMS ((uint32_t)0x00000060) /*!<CMS[1:0] bits (Center-aligned mode selection) */
+#define TIM_CR1_CMS_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define TIM_CR1_CMS_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+
+#define TIM_CR1_ARPE ((uint32_t)0x00000080) /*!<Auto-reload preload enable */
+
+#define TIM_CR1_CKD ((uint32_t)0x00000300) /*!<CKD[1:0] bits (clock division) */
+#define TIM_CR1_CKD_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CR1_CKD_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+/******************* Bit definition for TIM_CR2 register *******************/
+#define TIM_CR2_CCPC ((uint32_t)0x00000001) /*!<Capture/Compare Preloaded Control */
+#define TIM_CR2_CCUS ((uint32_t)0x00000004) /*!<Capture/Compare Control Update Selection */
+#define TIM_CR2_CCDS ((uint32_t)0x00000008) /*!<Capture/Compare DMA Selection */
+
+#define TIM_CR2_MMS ((uint32_t)0x00000070) /*!<MMS[2:0] bits (Master Mode Selection) */
+#define TIM_CR2_MMS_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CR2_MMS_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CR2_MMS_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CR2_TI1S ((uint32_t)0x00000080) /*!<TI1 Selection */
+#define TIM_CR2_OIS1 ((uint32_t)0x00000100) /*!<Output Idle state 1 (OC1 output) */
+#define TIM_CR2_OIS1N ((uint32_t)0x00000200) /*!<Output Idle state 1 (OC1N output) */
+#define TIM_CR2_OIS2 ((uint32_t)0x00000400) /*!<Output Idle state 2 (OC2 output) */
+#define TIM_CR2_OIS2N ((uint32_t)0x00000800) /*!<Output Idle state 2 (OC2N output) */
+#define TIM_CR2_OIS3 ((uint32_t)0x00001000) /*!<Output Idle state 3 (OC3 output) */
+#define TIM_CR2_OIS3N ((uint32_t)0x00002000) /*!<Output Idle state 3 (OC3N output) */
+#define TIM_CR2_OIS4 ((uint32_t)0x00004000) /*!<Output Idle state 4 (OC4 output) */
+
+/******************* Bit definition for TIM_SMCR register ******************/
+#define TIM_SMCR_SMS ((uint32_t)0x00000007) /*!<SMS[2:0] bits (Slave mode selection) */
+#define TIM_SMCR_SMS_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_SMCR_SMS_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_SMCR_SMS_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+
+#define TIM_SMCR_OCCS ((uint32_t)0x00000008) /*!< OCREF clear selection */
+
+#define TIM_SMCR_TS ((uint32_t)0x00000070) /*!<TS[2:0] bits (Trigger selection) */
+#define TIM_SMCR_TS_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_SMCR_TS_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_SMCR_TS_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_SMCR_MSM ((uint32_t)0x00000080) /*!<Master/slave mode */
+
+#define TIM_SMCR_ETF ((uint32_t)0x00000F00) /*!<ETF[3:0] bits (External trigger filter) */
+#define TIM_SMCR_ETF_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_SMCR_ETF_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define TIM_SMCR_ETF_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define TIM_SMCR_ETF_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+
+#define TIM_SMCR_ETPS ((uint32_t)0x00003000) /*!<ETPS[1:0] bits (External trigger prescaler) */
+#define TIM_SMCR_ETPS_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_SMCR_ETPS_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+
+#define TIM_SMCR_ECE ((uint32_t)0x00004000) /*!<External clock enable */
+#define TIM_SMCR_ETP ((uint32_t)0x00008000) /*!<External trigger polarity */
+
+/******************* Bit definition for TIM_DIER register ******************/
+#define TIM_DIER_UIE ((uint32_t)0x00000001) /*!<Update interrupt enable */
+#define TIM_DIER_CC1IE ((uint32_t)0x00000002) /*!<Capture/Compare 1 interrupt enable */
+#define TIM_DIER_CC2IE ((uint32_t)0x00000004) /*!<Capture/Compare 2 interrupt enable */
+#define TIM_DIER_CC3IE ((uint32_t)0x00000008) /*!<Capture/Compare 3 interrupt enable */
+#define TIM_DIER_CC4IE ((uint32_t)0x00000010) /*!<Capture/Compare 4 interrupt enable */
+#define TIM_DIER_COMIE ((uint32_t)0x00000020) /*!<COM interrupt enable */
+#define TIM_DIER_TIE ((uint32_t)0x00000040) /*!<Trigger interrupt enable */
+#define TIM_DIER_BIE ((uint32_t)0x00000080) /*!<Break interrupt enable */
+#define TIM_DIER_UDE ((uint32_t)0x00000100) /*!<Update DMA request enable */
+#define TIM_DIER_CC1DE ((uint32_t)0x00000200) /*!<Capture/Compare 1 DMA request enable */
+#define TIM_DIER_CC2DE ((uint32_t)0x00000400) /*!<Capture/Compare 2 DMA request enable */
+#define TIM_DIER_CC3DE ((uint32_t)0x00000800) /*!<Capture/Compare 3 DMA request enable */
+#define TIM_DIER_CC4DE ((uint32_t)0x00001000) /*!<Capture/Compare 4 DMA request enable */
+#define TIM_DIER_COMDE ((uint32_t)0x00002000) /*!<COM DMA request enable */
+#define TIM_DIER_TDE ((uint32_t)0x00004000) /*!<Trigger DMA request enable */
+
+/******************** Bit definition for TIM_SR register *******************/
+#define TIM_SR_UIF ((uint32_t)0x00000001) /*!<Update interrupt Flag */
+#define TIM_SR_CC1IF ((uint32_t)0x00000002) /*!<Capture/Compare 1 interrupt Flag */
+#define TIM_SR_CC2IF ((uint32_t)0x00000004) /*!<Capture/Compare 2 interrupt Flag */
+#define TIM_SR_CC3IF ((uint32_t)0x00000008) /*!<Capture/Compare 3 interrupt Flag */
+#define TIM_SR_CC4IF ((uint32_t)0x00000010) /*!<Capture/Compare 4 interrupt Flag */
+#define TIM_SR_COMIF ((uint32_t)0x00000020) /*!<COM interrupt Flag */
+#define TIM_SR_TIF ((uint32_t)0x00000040) /*!<Trigger interrupt Flag */
+#define TIM_SR_BIF ((uint32_t)0x00000080) /*!<Break interrupt Flag */
+#define TIM_SR_CC1OF ((uint32_t)0x00000200) /*!<Capture/Compare 1 Overcapture Flag */
+#define TIM_SR_CC2OF ((uint32_t)0x00000400) /*!<Capture/Compare 2 Overcapture Flag */
+#define TIM_SR_CC3OF ((uint32_t)0x00000800) /*!<Capture/Compare 3 Overcapture Flag */
+#define TIM_SR_CC4OF ((uint32_t)0x00001000) /*!<Capture/Compare 4 Overcapture Flag */
+
+/******************* Bit definition for TIM_EGR register *******************/
+#define TIM_EGR_UG ((uint32_t)0x00000001) /*!<Update Generation */
+#define TIM_EGR_CC1G ((uint32_t)0x00000002) /*!<Capture/Compare 1 Generation */
+#define TIM_EGR_CC2G ((uint32_t)0x00000004) /*!<Capture/Compare 2 Generation */
+#define TIM_EGR_CC3G ((uint32_t)0x00000008) /*!<Capture/Compare 3 Generation */
+#define TIM_EGR_CC4G ((uint32_t)0x00000010) /*!<Capture/Compare 4 Generation */
+#define TIM_EGR_COMG ((uint32_t)0x00000020) /*!<Capture/Compare Control Update Generation */
+#define TIM_EGR_TG ((uint32_t)0x00000040) /*!<Trigger Generation */
+#define TIM_EGR_BG ((uint32_t)0x00000080) /*!<Break Generation */
+
+/****************** Bit definition for TIM_CCMR1 register ******************/
+#define TIM_CCMR1_CC1S ((uint32_t)0x00000003) /*!<CC1S[1:0] bits (Capture/Compare 1 Selection) */
+#define TIM_CCMR1_CC1S_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_CCMR1_CC1S_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC1FE ((uint32_t)0x00000004) /*!<Output Compare 1 Fast enable */
+#define TIM_CCMR1_OC1PE ((uint32_t)0x00000008) /*!<Output Compare 1 Preload enable */
+
+#define TIM_CCMR1_OC1M ((uint32_t)0x00000070) /*!<OC1M[2:0] bits (Output Compare 1 Mode) */
+#define TIM_CCMR1_OC1M_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR1_OC1M_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR1_OC1M_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CCMR1_OC1CE ((uint32_t)0x00000080) /*!<Output Compare 1Clear Enable */
+
+#define TIM_CCMR1_CC2S ((uint32_t)0x00000300) /*!<CC2S[1:0] bits (Capture/Compare 2 Selection) */
+#define TIM_CCMR1_CC2S_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CCMR1_CC2S_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC2FE ((uint32_t)0x00000400) /*!<Output Compare 2 Fast enable */
+#define TIM_CCMR1_OC2PE ((uint32_t)0x00000800) /*!<Output Compare 2 Preload enable */
+
+#define TIM_CCMR1_OC2M ((uint32_t)0x00007000) /*!<OC2M[2:0] bits (Output Compare 2 Mode) */
+#define TIM_CCMR1_OC2M_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR1_OC2M_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR1_OC2M_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+
+#define TIM_CCMR1_OC2CE ((uint32_t)0x00008000) /*!<Output Compare 2 Clear Enable */
+
+/*---------------------------------------------------------------------------*/
+
+#define TIM_CCMR1_IC1PSC ((uint32_t)0x0000000C) /*!<IC1PSC[1:0] bits (Input Capture 1 Prescaler) */
+#define TIM_CCMR1_IC1PSC_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define TIM_CCMR1_IC1PSC_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC1F ((uint32_t)0x000000F0) /*!<IC1F[3:0] bits (Input Capture 1 Filter) */
+#define TIM_CCMR1_IC1F_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR1_IC1F_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR1_IC1F_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define TIM_CCMR1_IC1F_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define TIM_CCMR1_IC2PSC ((uint32_t)0x00000C00) /*!<IC2PSC[1:0] bits (Input Capture 2 Prescaler) */
+#define TIM_CCMR1_IC2PSC_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define TIM_CCMR1_IC2PSC_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC2F ((uint32_t)0x0000F000) /*!<IC2F[3:0] bits (Input Capture 2 Filter) */
+#define TIM_CCMR1_IC2F_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR1_IC2F_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR1_IC2F_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define TIM_CCMR1_IC2F_3 ((uint32_t)0x00008000) /*!<Bit 3 */
+
+/****************** Bit definition for TIM_CCMR2 register ******************/
+#define TIM_CCMR2_CC3S ((uint32_t)0x00000003) /*!<CC3S[1:0] bits (Capture/Compare 3 Selection) */
+#define TIM_CCMR2_CC3S_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_CCMR2_CC3S_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC3FE ((uint32_t)0x00000004) /*!<Output Compare 3 Fast enable */
+#define TIM_CCMR2_OC3PE ((uint32_t)0x00000008) /*!<Output Compare 3 Preload enable */
+
+#define TIM_CCMR2_OC3M ((uint32_t)0x00000070) /*!<OC3M[2:0] bits (Output Compare 3 Mode) */
+#define TIM_CCMR2_OC3M_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR2_OC3M_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR2_OC3M_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CCMR2_OC3CE ((uint32_t)0x00000080) /*!<Output Compare 3 Clear Enable */
+
+#define TIM_CCMR2_CC4S ((uint32_t)0x00000300) /*!<CC4S[1:0] bits (Capture/Compare 4 Selection) */
+#define TIM_CCMR2_CC4S_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CCMR2_CC4S_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC4FE ((uint32_t)0x00000400) /*!<Output Compare 4 Fast enable */
+#define TIM_CCMR2_OC4PE ((uint32_t)0x00000800) /*!<Output Compare 4 Preload enable */
+
+#define TIM_CCMR2_OC4M ((uint32_t)0x00007000) /*!<OC4M[2:0] bits (Output Compare 4 Mode) */
+#define TIM_CCMR2_OC4M_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR2_OC4M_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR2_OC4M_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+
+#define TIM_CCMR2_OC4CE ((uint32_t)0x00008000) /*!<Output Compare 4 Clear Enable */
+
+/*---------------------------------------------------------------------------*/
+
+#define TIM_CCMR2_IC3PSC ((uint32_t)0x0000000C) /*!<IC3PSC[1:0] bits (Input Capture 3 Prescaler) */
+#define TIM_CCMR2_IC3PSC_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define TIM_CCMR2_IC3PSC_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC3F ((uint32_t)0x000000F0) /*!<IC3F[3:0] bits (Input Capture 3 Filter) */
+#define TIM_CCMR2_IC3F_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR2_IC3F_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR2_IC3F_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define TIM_CCMR2_IC3F_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define TIM_CCMR2_IC4PSC ((uint32_t)0x00000C00) /*!<IC4PSC[1:0] bits (Input Capture 4 Prescaler) */
+#define TIM_CCMR2_IC4PSC_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define TIM_CCMR2_IC4PSC_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC4F ((uint32_t)0x0000F000) /*!<IC4F[3:0] bits (Input Capture 4 Filter) */
+#define TIM_CCMR2_IC4F_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR2_IC4F_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR2_IC4F_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define TIM_CCMR2_IC4F_3 ((uint32_t)0x00008000) /*!<Bit 3 */
+
+/******************* Bit definition for TIM_CCER register ******************/
+#define TIM_CCER_CC1E ((uint32_t)0x00000001) /*!<Capture/Compare 1 output enable */
+#define TIM_CCER_CC1P ((uint32_t)0x00000002) /*!<Capture/Compare 1 output Polarity */
+#define TIM_CCER_CC1NE ((uint32_t)0x00000004) /*!<Capture/Compare 1 Complementary output enable */
+#define TIM_CCER_CC1NP ((uint32_t)0x00000008) /*!<Capture/Compare 1 Complementary output Polarity */
+#define TIM_CCER_CC2E ((uint32_t)0x00000010) /*!<Capture/Compare 2 output enable */
+#define TIM_CCER_CC2P ((uint32_t)0x00000020) /*!<Capture/Compare 2 output Polarity */
+#define TIM_CCER_CC2NE ((uint32_t)0x00000040) /*!<Capture/Compare 2 Complementary output enable */
+#define TIM_CCER_CC2NP ((uint32_t)0x00000080) /*!<Capture/Compare 2 Complementary output Polarity */
+#define TIM_CCER_CC3E ((uint32_t)0x00000100) /*!<Capture/Compare 3 output enable */
+#define TIM_CCER_CC3P ((uint32_t)0x00000200) /*!<Capture/Compare 3 output Polarity */
+#define TIM_CCER_CC3NE ((uint32_t)0x00000400) /*!<Capture/Compare 3 Complementary output enable */
+#define TIM_CCER_CC3NP ((uint32_t)0x00000800) /*!<Capture/Compare 3 Complementary output Polarity */
+#define TIM_CCER_CC4E ((uint32_t)0x00001000) /*!<Capture/Compare 4 output enable */
+#define TIM_CCER_CC4P ((uint32_t)0x00002000) /*!<Capture/Compare 4 output Polarity */
+#define TIM_CCER_CC4NP ((uint32_t)0x00008000) /*!<Capture/Compare 4 Complementary output Polarity */
+
+/******************* Bit definition for TIM_CNT register *******************/
+#define TIM_CNT_CNT ((uint32_t)0xFFFFFFFF) /*!<Counter Value */
+
+/******************* Bit definition for TIM_PSC register *******************/
+#define TIM_PSC_PSC ((uint32_t)0x0000FFFF) /*!<Prescaler Value */
+
+/******************* Bit definition for TIM_ARR register *******************/
+#define TIM_ARR_ARR ((uint32_t)0xFFFFFFFF) /*!<actual auto-reload Value */
+
+/******************* Bit definition for TIM_RCR register *******************/
+#define TIM_RCR_REP ((uint32_t)0x000000FF) /*!<Repetition Counter Value */
+
+/******************* Bit definition for TIM_CCR1 register ******************/
+#define TIM_CCR1_CCR1 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 1 Value */
+
+/******************* Bit definition for TIM_CCR2 register ******************/
+#define TIM_CCR2_CCR2 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 2 Value */
+
+/******************* Bit definition for TIM_CCR3 register ******************/
+#define TIM_CCR3_CCR3 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 3 Value */
+
+/******************* Bit definition for TIM_CCR4 register ******************/
+#define TIM_CCR4_CCR4 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 4 Value */
+
+/******************* Bit definition for TIM_BDTR register ******************/
+#define TIM_BDTR_DTG ((uint32_t)0x000000FF) /*!<DTG[0:7] bits (Dead-Time Generator set-up) */
+#define TIM_BDTR_DTG_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_BDTR_DTG_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_BDTR_DTG_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define TIM_BDTR_DTG_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define TIM_BDTR_DTG_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define TIM_BDTR_DTG_5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define TIM_BDTR_DTG_6 ((uint32_t)0x00000040) /*!<Bit 6 */
+#define TIM_BDTR_DTG_7 ((uint32_t)0x00000080) /*!<Bit 7 */
+
+#define TIM_BDTR_LOCK ((uint32_t)0x00000300) /*!<LOCK[1:0] bits (Lock Configuration) */
+#define TIM_BDTR_LOCK_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_BDTR_LOCK_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_BDTR_OSSI ((uint32_t)0x00000400) /*!<Off-State Selection for Idle mode */
+#define TIM_BDTR_OSSR ((uint32_t)0x00000800) /*!<Off-State Selection for Run mode */
+#define TIM_BDTR_BKE ((uint32_t)0x00001000) /*!<Break enable */
+#define TIM_BDTR_BKP ((uint32_t)0x00002000) /*!<Break Polarity */
+#define TIM_BDTR_AOE ((uint32_t)0x00004000) /*!<Automatic Output enable */
+#define TIM_BDTR_MOE ((uint32_t)0x00008000) /*!<Main Output enable */
+
+/******************* Bit definition for TIM_DCR register *******************/
+#define TIM_DCR_DBA ((uint32_t)0x0000001F) /*!<DBA[4:0] bits (DMA Base Address) */
+#define TIM_DCR_DBA_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_DCR_DBA_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_DCR_DBA_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define TIM_DCR_DBA_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define TIM_DCR_DBA_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+
+#define TIM_DCR_DBL ((uint32_t)0x00001F00) /*!<DBL[4:0] bits (DMA Burst Length) */
+#define TIM_DCR_DBL_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_DCR_DBL_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define TIM_DCR_DBL_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define TIM_DCR_DBL_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define TIM_DCR_DBL_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+
+/******************* Bit definition for TIM_DMAR register ******************/
+#define TIM_DMAR_DMAB ((uint32_t)0x0000FFFF) /*!<DMA register for burst accesses */
+
+/******************* Bit definition for TIM14_OR register ********************/
+#define TIM14_OR_TI1_RMP ((uint32_t)0x00000003) /*!<TI1_RMP[1:0] bits (TIM14 Input 4 remap) */
+#define TIM14_OR_TI1_RMP_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM14_OR_TI1_RMP_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+/******************************************************************************/
+/* */
+/* Touch Sensing Controller (TSC) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for TSC_CR register *********************/
+#define TSC_CR_TSCE ((uint32_t)0x00000001) /*!<Touch sensing controller enable */
+#define TSC_CR_START ((uint32_t)0x00000002) /*!<Start acquisition */
+#define TSC_CR_AM ((uint32_t)0x00000004) /*!<Acquisition mode */
+#define TSC_CR_SYNCPOL ((uint32_t)0x00000008) /*!<Synchronization pin polarity */
+#define TSC_CR_IODEF ((uint32_t)0x00000010) /*!<IO default mode */
+
+#define TSC_CR_MCV ((uint32_t)0x000000E0) /*!<MCV[2:0] bits (Max Count Value) */
+#define TSC_CR_MCV_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define TSC_CR_MCV_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+#define TSC_CR_MCV_2 ((uint32_t)0x00000080) /*!<Bit 2 */
+
+#define TSC_CR_PGPSC ((uint32_t)0x00007000) /*!<PGPSC[2:0] bits (Pulse Generator Prescaler) */
+#define TSC_CR_PGPSC_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TSC_CR_PGPSC_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TSC_CR_PGPSC_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+
+#define TSC_CR_SSPSC ((uint32_t)0x00008000) /*!<Spread Spectrum Prescaler */
+#define TSC_CR_SSE ((uint32_t)0x00010000) /*!<Spread Spectrum Enable */
+
+#define TSC_CR_SSD ((uint32_t)0x00FE0000) /*!<SSD[6:0] bits (Spread Spectrum Deviation) */
+#define TSC_CR_SSD_0 ((uint32_t)0x00020000) /*!<Bit 0 */
+#define TSC_CR_SSD_1 ((uint32_t)0x00040000) /*!<Bit 1 */
+#define TSC_CR_SSD_2 ((uint32_t)0x00080000) /*!<Bit 2 */
+#define TSC_CR_SSD_3 ((uint32_t)0x00100000) /*!<Bit 3 */
+#define TSC_CR_SSD_4 ((uint32_t)0x00200000) /*!<Bit 4 */
+#define TSC_CR_SSD_5 ((uint32_t)0x00400000) /*!<Bit 5 */
+#define TSC_CR_SSD_6 ((uint32_t)0x00800000) /*!<Bit 6 */
+
+#define TSC_CR_CTPL ((uint32_t)0x0F000000) /*!<CTPL[3:0] bits (Charge Transfer pulse low) */
+#define TSC_CR_CTPL_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define TSC_CR_CTPL_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define TSC_CR_CTPL_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define TSC_CR_CTPL_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+
+#define TSC_CR_CTPH ((uint32_t)0xF0000000) /*!<CTPH[3:0] bits (Charge Transfer pulse high) */
+#define TSC_CR_CTPH_0 ((uint32_t)0x10000000) /*!<Bit 0 */
+#define TSC_CR_CTPH_1 ((uint32_t)0x20000000) /*!<Bit 1 */
+#define TSC_CR_CTPH_2 ((uint32_t)0x40000000) /*!<Bit 2 */
+#define TSC_CR_CTPH_3 ((uint32_t)0x80000000) /*!<Bit 3 */
+
+/******************* Bit definition for TSC_IER register ********************/
+#define TSC_IER_EOAIE ((uint32_t)0x00000001) /*!<End of acquisition interrupt enable */
+#define TSC_IER_MCEIE ((uint32_t)0x00000002) /*!<Max count error interrupt enable */
+
+/******************* Bit definition for TSC_ICR register ********************/
+#define TSC_ICR_EOAIC ((uint32_t)0x00000001) /*!<End of acquisition interrupt clear */
+#define TSC_ICR_MCEIC ((uint32_t)0x00000002) /*!<Max count error interrupt clear */
+
+/******************* Bit definition for TSC_ISR register ********************/
+#define TSC_ISR_EOAF ((uint32_t)0x00000001) /*!<End of acquisition flag */
+#define TSC_ISR_MCEF ((uint32_t)0x00000002) /*!<Max count error flag */
+
+/******************* Bit definition for TSC_IOHCR register ******************/
+#define TSC_IOHCR_G1_IO1 ((uint32_t)0x00000001) /*!<GROUP1_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G1_IO2 ((uint32_t)0x00000002) /*!<GROUP1_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G1_IO3 ((uint32_t)0x00000004) /*!<GROUP1_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G1_IO4 ((uint32_t)0x00000008) /*!<GROUP1_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G2_IO1 ((uint32_t)0x00000010) /*!<GROUP2_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G2_IO2 ((uint32_t)0x00000020) /*!<GROUP2_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G2_IO3 ((uint32_t)0x00000040) /*!<GROUP2_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G2_IO4 ((uint32_t)0x00000080) /*!<GROUP2_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G3_IO1 ((uint32_t)0x00000100) /*!<GROUP3_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G3_IO2 ((uint32_t)0x00000200) /*!<GROUP3_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G3_IO3 ((uint32_t)0x00000400) /*!<GROUP3_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G3_IO4 ((uint32_t)0x00000800) /*!<GROUP3_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G4_IO1 ((uint32_t)0x00001000) /*!<GROUP4_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G4_IO2 ((uint32_t)0x00002000) /*!<GROUP4_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G4_IO3 ((uint32_t)0x00004000) /*!<GROUP4_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G4_IO4 ((uint32_t)0x00008000) /*!<GROUP4_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G5_IO1 ((uint32_t)0x00010000) /*!<GROUP5_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G5_IO2 ((uint32_t)0x00020000) /*!<GROUP5_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G5_IO3 ((uint32_t)0x00040000) /*!<GROUP5_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G5_IO4 ((uint32_t)0x00080000) /*!<GROUP5_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G6_IO1 ((uint32_t)0x00100000) /*!<GROUP6_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G6_IO2 ((uint32_t)0x00200000) /*!<GROUP6_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G6_IO3 ((uint32_t)0x00400000) /*!<GROUP6_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G6_IO4 ((uint32_t)0x00800000) /*!<GROUP6_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G7_IO1 ((uint32_t)0x01000000) /*!<GROUP7_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G7_IO2 ((uint32_t)0x02000000) /*!<GROUP7_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G7_IO3 ((uint32_t)0x04000000) /*!<GROUP7_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G7_IO4 ((uint32_t)0x08000000) /*!<GROUP7_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G8_IO1 ((uint32_t)0x10000000) /*!<GROUP8_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G8_IO2 ((uint32_t)0x20000000) /*!<GROUP8_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G8_IO3 ((uint32_t)0x40000000) /*!<GROUP8_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G8_IO4 ((uint32_t)0x80000000) /*!<GROUP8_IO4 schmitt trigger hysteresis mode */
+
+/******************* Bit definition for TSC_IOASCR register *****************/
+#define TSC_IOASCR_G1_IO1 ((uint32_t)0x00000001) /*!<GROUP1_IO1 analog switch enable */
+#define TSC_IOASCR_G1_IO2 ((uint32_t)0x00000002) /*!<GROUP1_IO2 analog switch enable */
+#define TSC_IOASCR_G1_IO3 ((uint32_t)0x00000004) /*!<GROUP1_IO3 analog switch enable */
+#define TSC_IOASCR_G1_IO4 ((uint32_t)0x00000008) /*!<GROUP1_IO4 analog switch enable */
+#define TSC_IOASCR_G2_IO1 ((uint32_t)0x00000010) /*!<GROUP2_IO1 analog switch enable */
+#define TSC_IOASCR_G2_IO2 ((uint32_t)0x00000020) /*!<GROUP2_IO2 analog switch enable */
+#define TSC_IOASCR_G2_IO3 ((uint32_t)0x00000040) /*!<GROUP2_IO3 analog switch enable */
+#define TSC_IOASCR_G2_IO4 ((uint32_t)0x00000080) /*!<GROUP2_IO4 analog switch enable */
+#define TSC_IOASCR_G3_IO1 ((uint32_t)0x00000100) /*!<GROUP3_IO1 analog switch enable */
+#define TSC_IOASCR_G3_IO2 ((uint32_t)0x00000200) /*!<GROUP3_IO2 analog switch enable */
+#define TSC_IOASCR_G3_IO3 ((uint32_t)0x00000400) /*!<GROUP3_IO3 analog switch enable */
+#define TSC_IOASCR_G3_IO4 ((uint32_t)0x00000800) /*!<GROUP3_IO4 analog switch enable */
+#define TSC_IOASCR_G4_IO1 ((uint32_t)0x00001000) /*!<GROUP4_IO1 analog switch enable */
+#define TSC_IOASCR_G4_IO2 ((uint32_t)0x00002000) /*!<GROUP4_IO2 analog switch enable */
+#define TSC_IOASCR_G4_IO3 ((uint32_t)0x00004000) /*!<GROUP4_IO3 analog switch enable */
+#define TSC_IOASCR_G4_IO4 ((uint32_t)0x00008000) /*!<GROUP4_IO4 analog switch enable */
+#define TSC_IOASCR_G5_IO1 ((uint32_t)0x00010000) /*!<GROUP5_IO1 analog switch enable */
+#define TSC_IOASCR_G5_IO2 ((uint32_t)0x00020000) /*!<GROUP5_IO2 analog switch enable */
+#define TSC_IOASCR_G5_IO3 ((uint32_t)0x00040000) /*!<GROUP5_IO3 analog switch enable */
+#define TSC_IOASCR_G5_IO4 ((uint32_t)0x00080000) /*!<GROUP5_IO4 analog switch enable */
+#define TSC_IOASCR_G6_IO1 ((uint32_t)0x00100000) /*!<GROUP6_IO1 analog switch enable */
+#define TSC_IOASCR_G6_IO2 ((uint32_t)0x00200000) /*!<GROUP6_IO2 analog switch enable */
+#define TSC_IOASCR_G6_IO3 ((uint32_t)0x00400000) /*!<GROUP6_IO3 analog switch enable */
+#define TSC_IOASCR_G6_IO4 ((uint32_t)0x00800000) /*!<GROUP6_IO4 analog switch enable */
+#define TSC_IOASCR_G7_IO1 ((uint32_t)0x01000000) /*!<GROUP7_IO1 analog switch enable */
+#define TSC_IOASCR_G7_IO2 ((uint32_t)0x02000000) /*!<GROUP7_IO2 analog switch enable */
+#define TSC_IOASCR_G7_IO3 ((uint32_t)0x04000000) /*!<GROUP7_IO3 analog switch enable */
+#define TSC_IOASCR_G7_IO4 ((uint32_t)0x08000000) /*!<GROUP7_IO4 analog switch enable */
+#define TSC_IOASCR_G8_IO1 ((uint32_t)0x10000000) /*!<GROUP8_IO1 analog switch enable */
+#define TSC_IOASCR_G8_IO2 ((uint32_t)0x20000000) /*!<GROUP8_IO2 analog switch enable */
+#define TSC_IOASCR_G8_IO3 ((uint32_t)0x40000000) /*!<GROUP8_IO3 analog switch enable */
+#define TSC_IOASCR_G8_IO4 ((uint32_t)0x80000000) /*!<GROUP8_IO4 analog switch enable */
+
+/******************* Bit definition for TSC_IOSCR register ******************/
+#define TSC_IOSCR_G1_IO1 ((uint32_t)0x00000001) /*!<GROUP1_IO1 sampling mode */
+#define TSC_IOSCR_G1_IO2 ((uint32_t)0x00000002) /*!<GROUP1_IO2 sampling mode */
+#define TSC_IOSCR_G1_IO3 ((uint32_t)0x00000004) /*!<GROUP1_IO3 sampling mode */
+#define TSC_IOSCR_G1_IO4 ((uint32_t)0x00000008) /*!<GROUP1_IO4 sampling mode */
+#define TSC_IOSCR_G2_IO1 ((uint32_t)0x00000010) /*!<GROUP2_IO1 sampling mode */
+#define TSC_IOSCR_G2_IO2 ((uint32_t)0x00000020) /*!<GROUP2_IO2 sampling mode */
+#define TSC_IOSCR_G2_IO3 ((uint32_t)0x00000040) /*!<GROUP2_IO3 sampling mode */
+#define TSC_IOSCR_G2_IO4 ((uint32_t)0x00000080) /*!<GROUP2_IO4 sampling mode */
+#define TSC_IOSCR_G3_IO1 ((uint32_t)0x00000100) /*!<GROUP3_IO1 sampling mode */
+#define TSC_IOSCR_G3_IO2 ((uint32_t)0x00000200) /*!<GROUP3_IO2 sampling mode */
+#define TSC_IOSCR_G3_IO3 ((uint32_t)0x00000400) /*!<GROUP3_IO3 sampling mode */
+#define TSC_IOSCR_G3_IO4 ((uint32_t)0x00000800) /*!<GROUP3_IO4 sampling mode */
+#define TSC_IOSCR_G4_IO1 ((uint32_t)0x00001000) /*!<GROUP4_IO1 sampling mode */
+#define TSC_IOSCR_G4_IO2 ((uint32_t)0x00002000) /*!<GROUP4_IO2 sampling mode */
+#define TSC_IOSCR_G4_IO3 ((uint32_t)0x00004000) /*!<GROUP4_IO3 sampling mode */
+#define TSC_IOSCR_G4_IO4 ((uint32_t)0x00008000) /*!<GROUP4_IO4 sampling mode */
+#define TSC_IOSCR_G5_IO1 ((uint32_t)0x00010000) /*!<GROUP5_IO1 sampling mode */
+#define TSC_IOSCR_G5_IO2 ((uint32_t)0x00020000) /*!<GROUP5_IO2 sampling mode */
+#define TSC_IOSCR_G5_IO3 ((uint32_t)0x00040000) /*!<GROUP5_IO3 sampling mode */
+#define TSC_IOSCR_G5_IO4 ((uint32_t)0x00080000) /*!<GROUP5_IO4 sampling mode */
+#define TSC_IOSCR_G6_IO1 ((uint32_t)0x00100000) /*!<GROUP6_IO1 sampling mode */
+#define TSC_IOSCR_G6_IO2 ((uint32_t)0x00200000) /*!<GROUP6_IO2 sampling mode */
+#define TSC_IOSCR_G6_IO3 ((uint32_t)0x00400000) /*!<GROUP6_IO3 sampling mode */
+#define TSC_IOSCR_G6_IO4 ((uint32_t)0x00800000) /*!<GROUP6_IO4 sampling mode */
+#define TSC_IOSCR_G7_IO1 ((uint32_t)0x01000000) /*!<GROUP7_IO1 sampling mode */
+#define TSC_IOSCR_G7_IO2 ((uint32_t)0x02000000) /*!<GROUP7_IO2 sampling mode */
+#define TSC_IOSCR_G7_IO3 ((uint32_t)0x04000000) /*!<GROUP7_IO3 sampling mode */
+#define TSC_IOSCR_G7_IO4 ((uint32_t)0x08000000) /*!<GROUP7_IO4 sampling mode */
+#define TSC_IOSCR_G8_IO1 ((uint32_t)0x10000000) /*!<GROUP8_IO1 sampling mode */
+#define TSC_IOSCR_G8_IO2 ((uint32_t)0x20000000) /*!<GROUP8_IO2 sampling mode */
+#define TSC_IOSCR_G8_IO3 ((uint32_t)0x40000000) /*!<GROUP8_IO3 sampling mode */
+#define TSC_IOSCR_G8_IO4 ((uint32_t)0x80000000) /*!<GROUP8_IO4 sampling mode */
+
+/******************* Bit definition for TSC_IOCCR register ******************/
+#define TSC_IOCCR_G1_IO1 ((uint32_t)0x00000001) /*!<GROUP1_IO1 channel mode */
+#define TSC_IOCCR_G1_IO2 ((uint32_t)0x00000002) /*!<GROUP1_IO2 channel mode */
+#define TSC_IOCCR_G1_IO3 ((uint32_t)0x00000004) /*!<GROUP1_IO3 channel mode */
+#define TSC_IOCCR_G1_IO4 ((uint32_t)0x00000008) /*!<GROUP1_IO4 channel mode */
+#define TSC_IOCCR_G2_IO1 ((uint32_t)0x00000010) /*!<GROUP2_IO1 channel mode */
+#define TSC_IOCCR_G2_IO2 ((uint32_t)0x00000020) /*!<GROUP2_IO2 channel mode */
+#define TSC_IOCCR_G2_IO3 ((uint32_t)0x00000040) /*!<GROUP2_IO3 channel mode */
+#define TSC_IOCCR_G2_IO4 ((uint32_t)0x00000080) /*!<GROUP2_IO4 channel mode */
+#define TSC_IOCCR_G3_IO1 ((uint32_t)0x00000100) /*!<GROUP3_IO1 channel mode */
+#define TSC_IOCCR_G3_IO2 ((uint32_t)0x00000200) /*!<GROUP3_IO2 channel mode */
+#define TSC_IOCCR_G3_IO3 ((uint32_t)0x00000400) /*!<GROUP3_IO3 channel mode */
+#define TSC_IOCCR_G3_IO4 ((uint32_t)0x00000800) /*!<GROUP3_IO4 channel mode */
+#define TSC_IOCCR_G4_IO1 ((uint32_t)0x00001000) /*!<GROUP4_IO1 channel mode */
+#define TSC_IOCCR_G4_IO2 ((uint32_t)0x00002000) /*!<GROUP4_IO2 channel mode */
+#define TSC_IOCCR_G4_IO3 ((uint32_t)0x00004000) /*!<GROUP4_IO3 channel mode */
+#define TSC_IOCCR_G4_IO4 ((uint32_t)0x00008000) /*!<GROUP4_IO4 channel mode */
+#define TSC_IOCCR_G5_IO1 ((uint32_t)0x00010000) /*!<GROUP5_IO1 channel mode */
+#define TSC_IOCCR_G5_IO2 ((uint32_t)0x00020000) /*!<GROUP5_IO2 channel mode */
+#define TSC_IOCCR_G5_IO3 ((uint32_t)0x00040000) /*!<GROUP5_IO3 channel mode */
+#define TSC_IOCCR_G5_IO4 ((uint32_t)0x00080000) /*!<GROUP5_IO4 channel mode */
+#define TSC_IOCCR_G6_IO1 ((uint32_t)0x00100000) /*!<GROUP6_IO1 channel mode */
+#define TSC_IOCCR_G6_IO2 ((uint32_t)0x00200000) /*!<GROUP6_IO2 channel mode */
+#define TSC_IOCCR_G6_IO3 ((uint32_t)0x00400000) /*!<GROUP6_IO3 channel mode */
+#define TSC_IOCCR_G6_IO4 ((uint32_t)0x00800000) /*!<GROUP6_IO4 channel mode */
+#define TSC_IOCCR_G7_IO1 ((uint32_t)0x01000000) /*!<GROUP7_IO1 channel mode */
+#define TSC_IOCCR_G7_IO2 ((uint32_t)0x02000000) /*!<GROUP7_IO2 channel mode */
+#define TSC_IOCCR_G7_IO3 ((uint32_t)0x04000000) /*!<GROUP7_IO3 channel mode */
+#define TSC_IOCCR_G7_IO4 ((uint32_t)0x08000000) /*!<GROUP7_IO4 channel mode */
+#define TSC_IOCCR_G8_IO1 ((uint32_t)0x10000000) /*!<GROUP8_IO1 channel mode */
+#define TSC_IOCCR_G8_IO2 ((uint32_t)0x20000000) /*!<GROUP8_IO2 channel mode */
+#define TSC_IOCCR_G8_IO3 ((uint32_t)0x40000000) /*!<GROUP8_IO3 channel mode */
+#define TSC_IOCCR_G8_IO4 ((uint32_t)0x80000000) /*!<GROUP8_IO4 channel mode */
+
+/******************* Bit definition for TSC_IOGCSR register *****************/
+#define TSC_IOGCSR_G1E ((uint32_t)0x00000001) /*!<Analog IO GROUP1 enable */
+#define TSC_IOGCSR_G2E ((uint32_t)0x00000002) /*!<Analog IO GROUP2 enable */
+#define TSC_IOGCSR_G3E ((uint32_t)0x00000004) /*!<Analog IO GROUP3 enable */
+#define TSC_IOGCSR_G4E ((uint32_t)0x00000008) /*!<Analog IO GROUP4 enable */
+#define TSC_IOGCSR_G5E ((uint32_t)0x00000010) /*!<Analog IO GROUP5 enable */
+#define TSC_IOGCSR_G6E ((uint32_t)0x00000020) /*!<Analog IO GROUP6 enable */
+#define TSC_IOGCSR_G7E ((uint32_t)0x00000040) /*!<Analog IO GROUP7 enable */
+#define TSC_IOGCSR_G8E ((uint32_t)0x00000080) /*!<Analog IO GROUP8 enable */
+#define TSC_IOGCSR_G1S ((uint32_t)0x00010000) /*!<Analog IO GROUP1 status */
+#define TSC_IOGCSR_G2S ((uint32_t)0x00020000) /*!<Analog IO GROUP2 status */
+#define TSC_IOGCSR_G3S ((uint32_t)0x00040000) /*!<Analog IO GROUP3 status */
+#define TSC_IOGCSR_G4S ((uint32_t)0x00080000) /*!<Analog IO GROUP4 status */
+#define TSC_IOGCSR_G5S ((uint32_t)0x00100000) /*!<Analog IO GROUP5 status */
+#define TSC_IOGCSR_G6S ((uint32_t)0x00200000) /*!<Analog IO GROUP6 status */
+#define TSC_IOGCSR_G7S ((uint32_t)0x00400000) /*!<Analog IO GROUP7 status */
+#define TSC_IOGCSR_G8S ((uint32_t)0x00800000) /*!<Analog IO GROUP8 status */
+
+/******************* Bit definition for TSC_IOGXCR register *****************/
+#define TSC_IOGXCR_CNT ((uint32_t)0x00003FFF) /*!<CNT[13:0] bits (Counter value) */
+
+/******************************************************************************/
+/* */
+/* Universal Synchronous Asynchronous Receiver Transmitter (USART) */
+/* */
+/******************************************************************************/
+/****************** Bit definition for USART_CR1 register *******************/
+#define USART_CR1_UE ((uint32_t)0x00000001) /*!< USART Enable */
+#define USART_CR1_UESM ((uint32_t)0x00000002) /*!< USART Enable in STOP Mode */
+#define USART_CR1_RE ((uint32_t)0x00000004) /*!< Receiver Enable */
+#define USART_CR1_TE ((uint32_t)0x00000008) /*!< Transmitter Enable */
+#define USART_CR1_IDLEIE ((uint32_t)0x00000010) /*!< IDLE Interrupt Enable */
+#define USART_CR1_RXNEIE ((uint32_t)0x00000020) /*!< RXNE Interrupt Enable */
+#define USART_CR1_TCIE ((uint32_t)0x00000040) /*!< Transmission Complete Interrupt Enable */
+#define USART_CR1_TXEIE ((uint32_t)0x00000080) /*!< TXE Interrupt Enable */
+#define USART_CR1_PEIE ((uint32_t)0x00000100) /*!< PE Interrupt Enable */
+#define USART_CR1_PS ((uint32_t)0x00000200) /*!< Parity Selection */
+#define USART_CR1_PCE ((uint32_t)0x00000400) /*!< Parity Control Enable */
+#define USART_CR1_WAKE ((uint32_t)0x00000800) /*!< Receiver Wakeup method */
+#define USART_CR1_M0 ((uint32_t)0x00001000) /*!< Word length bit 0 */
+#define USART_CR1_M ((uint32_t)0x00001000) /*!< SmartCard Length */
+#define USART_CR1_MME ((uint32_t)0x00002000) /*!< Mute Mode Enable */
+#define USART_CR1_CMIE ((uint32_t)0x00004000) /*!< Character match interrupt enable */
+#define USART_CR1_OVER8 ((uint32_t)0x00008000) /*!< Oversampling by 8-bit or 16-bit mode */
+#define USART_CR1_DEDT ((uint32_t)0x001F0000) /*!< DEDT[4:0] bits (Driver Enable Deassertion Time) */
+#define USART_CR1_DEDT_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define USART_CR1_DEDT_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define USART_CR1_DEDT_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define USART_CR1_DEDT_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+#define USART_CR1_DEDT_4 ((uint32_t)0x00100000) /*!< Bit 4 */
+#define USART_CR1_DEAT ((uint32_t)0x03E00000) /*!< DEAT[4:0] bits (Driver Enable Assertion Time) */
+#define USART_CR1_DEAT_0 ((uint32_t)0x00200000) /*!< Bit 0 */
+#define USART_CR1_DEAT_1 ((uint32_t)0x00400000) /*!< Bit 1 */
+#define USART_CR1_DEAT_2 ((uint32_t)0x00800000) /*!< Bit 2 */
+#define USART_CR1_DEAT_3 ((uint32_t)0x01000000) /*!< Bit 3 */
+#define USART_CR1_DEAT_4 ((uint32_t)0x02000000) /*!< Bit 4 */
+#define USART_CR1_RTOIE ((uint32_t)0x04000000) /*!< Receive Time Out interrupt enable */
+#define USART_CR1_EOBIE ((uint32_t)0x08000000) /*!< End of Block interrupt enable */
+
+/****************** Bit definition for USART_CR2 register *******************/
+#define USART_CR2_ADDM7 ((uint32_t)0x00000010) /*!< 7-bit or 4-bit Address Detection */
+#define USART_CR2_LBDL ((uint32_t)0x00000020) /*!< LIN Break Detection Length */
+#define USART_CR2_LBDIE ((uint32_t)0x00000040) /*!< LIN Break Detection Interrupt Enable */
+#define USART_CR2_LBCL ((uint32_t)0x00000100) /*!< Last Bit Clock pulse */
+#define USART_CR2_CPHA ((uint32_t)0x00000200) /*!< Clock Phase */
+#define USART_CR2_CPOL ((uint32_t)0x00000400) /*!< Clock Polarity */
+#define USART_CR2_CLKEN ((uint32_t)0x00000800) /*!< Clock Enable */
+#define USART_CR2_STOP ((uint32_t)0x00003000) /*!< STOP[1:0] bits (STOP bits) */
+#define USART_CR2_STOP_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define USART_CR2_STOP_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+#define USART_CR2_LINEN ((uint32_t)0x00004000) /*!< LIN mode enable */
+#define USART_CR2_SWAP ((uint32_t)0x00008000) /*!< SWAP TX/RX pins */
+#define USART_CR2_RXINV ((uint32_t)0x00010000) /*!< RX pin active level inversion */
+#define USART_CR2_TXINV ((uint32_t)0x00020000) /*!< TX pin active level inversion */
+#define USART_CR2_DATAINV ((uint32_t)0x00040000) /*!< Binary data inversion */
+#define USART_CR2_MSBFIRST ((uint32_t)0x00080000) /*!< Most Significant Bit First */
+#define USART_CR2_ABREN ((uint32_t)0x00100000) /*!< Auto Baud-Rate Enable*/
+#define USART_CR2_ABRMODE ((uint32_t)0x00600000) /*!< ABRMOD[1:0] bits (Auto Baud-Rate Mode) */
+#define USART_CR2_ABRMODE_0 ((uint32_t)0x00200000) /*!< Bit 0 */
+#define USART_CR2_ABRMODE_1 ((uint32_t)0x00400000) /*!< Bit 1 */
+#define USART_CR2_RTOEN ((uint32_t)0x00800000) /*!< Receiver Time-Out enable */
+#define USART_CR2_ADD ((uint32_t)0xFF000000) /*!< Address of the USART node */
+
+/****************** Bit definition for USART_CR3 register *******************/
+#define USART_CR3_EIE ((uint32_t)0x00000001) /*!< Error Interrupt Enable */
+#define USART_CR3_IREN ((uint32_t)0x00000002) /*!< IrDA mode Enable */
+#define USART_CR3_IRLP ((uint32_t)0x00000004) /*!< IrDA Low-Power */
+#define USART_CR3_HDSEL ((uint32_t)0x00000008) /*!< Half-Duplex Selection */
+#define USART_CR3_NACK ((uint32_t)0x00000010) /*!< SmartCard NACK enable */
+#define USART_CR3_SCEN ((uint32_t)0x00000020) /*!< SmartCard mode enable */
+#define USART_CR3_DMAR ((uint32_t)0x00000040) /*!< DMA Enable Receiver */
+#define USART_CR3_DMAT ((uint32_t)0x00000080) /*!< DMA Enable Transmitter */
+#define USART_CR3_RTSE ((uint32_t)0x00000100) /*!< RTS Enable */
+#define USART_CR3_CTSE ((uint32_t)0x00000200) /*!< CTS Enable */
+#define USART_CR3_CTSIE ((uint32_t)0x00000400) /*!< CTS Interrupt Enable */
+#define USART_CR3_ONEBIT ((uint32_t)0x00000800) /*!< One sample bit method enable */
+#define USART_CR3_OVRDIS ((uint32_t)0x00001000) /*!< Overrun Disable */
+#define USART_CR3_DDRE ((uint32_t)0x00002000) /*!< DMA Disable on Reception Error */
+#define USART_CR3_DEM ((uint32_t)0x00004000) /*!< Driver Enable Mode */
+#define USART_CR3_DEP ((uint32_t)0x00008000) /*!< Driver Enable Polarity Selection */
+#define USART_CR3_SCARCNT ((uint32_t)0x000E0000) /*!< SCARCNT[2:0] bits (SmartCard Auto-Retry Count) */
+#define USART_CR3_SCARCNT_0 ((uint32_t)0x00020000) /*!< Bit 0 */
+#define USART_CR3_SCARCNT_1 ((uint32_t)0x00040000) /*!< Bit 1 */
+#define USART_CR3_SCARCNT_2 ((uint32_t)0x00080000) /*!< Bit 2 */
+#define USART_CR3_WUS ((uint32_t)0x00300000) /*!< WUS[1:0] bits (Wake UP Interrupt Flag Selection) */
+#define USART_CR3_WUS_0 ((uint32_t)0x00100000) /*!< Bit 0 */
+#define USART_CR3_WUS_1 ((uint32_t)0x00200000) /*!< Bit 1 */
+#define USART_CR3_WUFIE ((uint32_t)0x00400000) /*!< Wake Up Interrupt Enable */
+
+/****************** Bit definition for USART_BRR register *******************/
+#define USART_BRR_DIV_FRACTION ((uint32_t)0x0000000F) /*!< Fraction of USARTDIV */
+#define USART_BRR_DIV_MANTISSA ((uint32_t)0x0000FFF0) /*!< Mantissa of USARTDIV */
+
+/****************** Bit definition for USART_GTPR register ******************/
+#define USART_GTPR_PSC ((uint32_t)0x000000FF) /*!< PSC[7:0] bits (Prescaler value) */
+#define USART_GTPR_GT ((uint32_t)0x0000FF00) /*!< GT[7:0] bits (Guard time value) */
+
+
+/******************* Bit definition for USART_RTOR register *****************/
+#define USART_RTOR_RTO ((uint32_t)0x00FFFFFF) /*!< Receiver Time Out Value */
+#define USART_RTOR_BLEN ((uint32_t)0xFF000000) /*!< Block Length */
+
+/******************* Bit definition for USART_RQR register ******************/
+#define USART_RQR_ABRRQ ((uint32_t)0x00000001) /*!< Auto-Baud Rate Request */
+#define USART_RQR_SBKRQ ((uint32_t)0x00000002) /*!< Send Break Request */
+#define USART_RQR_MMRQ ((uint32_t)0x00000004) /*!< Mute Mode Request */
+#define USART_RQR_RXFRQ ((uint32_t)0x00000008) /*!< Receive Data flush Request */
+#define USART_RQR_TXFRQ ((uint32_t)0x00000010) /*!< Transmit data flush Request */
+
+/******************* Bit definition for USART_ISR register ******************/
+#define USART_ISR_PE ((uint32_t)0x00000001) /*!< Parity Error */
+#define USART_ISR_FE ((uint32_t)0x00000002) /*!< Framing Error */
+#define USART_ISR_NE ((uint32_t)0x00000004) /*!< Noise detected Flag */
+#define USART_ISR_ORE ((uint32_t)0x00000008) /*!< OverRun Error */
+#define USART_ISR_IDLE ((uint32_t)0x00000010) /*!< IDLE line detected */
+#define USART_ISR_RXNE ((uint32_t)0x00000020) /*!< Read Data Register Not Empty */
+#define USART_ISR_TC ((uint32_t)0x00000040) /*!< Transmission Complete */
+#define USART_ISR_TXE ((uint32_t)0x00000080) /*!< Transmit Data Register Empty */
+#define USART_ISR_LBDF ((uint32_t)0x00000100) /*!< LIN Break Detection Flag */
+#define USART_ISR_CTSIF ((uint32_t)0x00000200) /*!< CTS interrupt flag */
+#define USART_ISR_CTS ((uint32_t)0x00000400) /*!< CTS flag */
+#define USART_ISR_RTOF ((uint32_t)0x00000800) /*!< Receiver Time Out */
+#define USART_ISR_EOBF ((uint32_t)0x00001000) /*!< End Of Block Flag */
+#define USART_ISR_ABRE ((uint32_t)0x00004000) /*!< Auto-Baud Rate Error */
+#define USART_ISR_ABRF ((uint32_t)0x00008000) /*!< Auto-Baud Rate Flag */
+#define USART_ISR_BUSY ((uint32_t)0x00010000) /*!< Busy Flag */
+#define USART_ISR_CMF ((uint32_t)0x00020000) /*!< Character Match Flag */
+#define USART_ISR_SBKF ((uint32_t)0x00040000) /*!< Send Break Flag */
+#define USART_ISR_RWU ((uint32_t)0x00080000) /*!< Receive Wake Up from mute mode Flag */
+#define USART_ISR_WUF ((uint32_t)0x00100000) /*!< Wake Up from stop mode Flag */
+#define USART_ISR_TEACK ((uint32_t)0x00200000) /*!< Transmit Enable Acknowledge Flag */
+#define USART_ISR_REACK ((uint32_t)0x00400000) /*!< Receive Enable Acknowledge Flag */
+
+/******************* Bit definition for USART_ICR register ******************/
+#define USART_ICR_PECF ((uint32_t)0x00000001) /*!< Parity Error Clear Flag */
+#define USART_ICR_FECF ((uint32_t)0x00000002) /*!< Framing Error Clear Flag */
+#define USART_ICR_NCF ((uint32_t)0x00000004) /*!< Noise detected Clear Flag */
+#define USART_ICR_ORECF ((uint32_t)0x00000008) /*!< OverRun Error Clear Flag */
+#define USART_ICR_IDLECF ((uint32_t)0x00000010) /*!< IDLE line detected Clear Flag */
+#define USART_ICR_TCCF ((uint32_t)0x00000040) /*!< Transmission Complete Clear Flag */
+#define USART_ICR_LBDCF ((uint32_t)0x00000100) /*!< LIN Break Detection Clear Flag */
+#define USART_ICR_CTSCF ((uint32_t)0x00000200) /*!< CTS Interrupt Clear Flag */
+#define USART_ICR_RTOCF ((uint32_t)0x00000800) /*!< Receiver Time Out Clear Flag */
+#define USART_ICR_EOBCF ((uint32_t)0x00001000) /*!< End Of Block Clear Flag */
+#define USART_ICR_CMCF ((uint32_t)0x00020000) /*!< Character Match Clear Flag */
+#define USART_ICR_WUCF ((uint32_t)0x00100000) /*!< Wake Up from stop mode Clear Flag */
+
+/******************* Bit definition for USART_RDR register ******************/
+#define USART_RDR_RDR ((uint16_t)0x01FF) /*!< RDR[8:0] bits (Receive Data value) */
+
+/******************* Bit definition for USART_TDR register ******************/
+#define USART_TDR_TDR ((uint16_t)0x01FF) /*!< TDR[8:0] bits (Transmit Data value) */
+
+/******************************************************************************/
+/* */
+/* Window WATCHDOG (WWDG) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for WWDG_CR register ********************/
+#define WWDG_CR_T ((uint32_t)0x7F) /*!<T[6:0] bits (7-Bit counter (MSB to LSB)) */
+#define WWDG_CR_T0 ((uint32_t)0x01) /*!<Bit 0 */
+#define WWDG_CR_T1 ((uint32_t)0x02) /*!<Bit 1 */
+#define WWDG_CR_T2 ((uint32_t)0x04) /*!<Bit 2 */
+#define WWDG_CR_T3 ((uint32_t)0x08) /*!<Bit 3 */
+#define WWDG_CR_T4 ((uint32_t)0x10) /*!<Bit 4 */
+#define WWDG_CR_T5 ((uint32_t)0x20) /*!<Bit 5 */
+#define WWDG_CR_T6 ((uint32_t)0x40) /*!<Bit 6 */
+
+#define WWDG_CR_WDGA ((uint32_t)0x80) /*!<Activation bit */
+
+/******************* Bit definition for WWDG_CFR register *******************/
+#define WWDG_CFR_W ((uint32_t)0x007F) /*!<W[6:0] bits (7-bit window value) */
+#define WWDG_CFR_W0 ((uint32_t)0x0001) /*!<Bit 0 */
+#define WWDG_CFR_W1 ((uint32_t)0x0002) /*!<Bit 1 */
+#define WWDG_CFR_W2 ((uint32_t)0x0004) /*!<Bit 2 */
+#define WWDG_CFR_W3 ((uint32_t)0x0008) /*!<Bit 3 */
+#define WWDG_CFR_W4 ((uint32_t)0x0010) /*!<Bit 4 */
+#define WWDG_CFR_W5 ((uint32_t)0x0020) /*!<Bit 5 */
+#define WWDG_CFR_W6 ((uint32_t)0x0040) /*!<Bit 6 */
+
+#define WWDG_CFR_WDGTB ((uint32_t)0x0180) /*!<WDGTB[1:0] bits (Timer Base) */
+#define WWDG_CFR_WDGTB0 ((uint32_t)0x0080) /*!<Bit 0 */
+#define WWDG_CFR_WDGTB1 ((uint32_t)0x0100) /*!<Bit 1 */
+
+#define WWDG_CFR_EWI ((uint32_t)0x0200) /*!<Early Wakeup Interrupt */
+
+/******************* Bit definition for WWDG_SR register ********************/
+#define WWDG_SR_EWIF ((uint32_t)0x01) /*!<Early Wakeup Interrupt Flag */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+
+/** @addtogroup Exported_macro
+ * @{
+ */
+
+/****************************** ADC Instances *********************************/
+#define IS_ADC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == ADC1)
+
+#define IS_ADC_COMMON_INSTANCE(INSTANCE) ((INSTANCE) == ADC)
+
+/****************************** COMP Instances *********************************/
+#define IS_COMP_ALL_INSTANCE(INSTANCE) (((INSTANCE) == COMP1) || \
+ ((INSTANCE) == COMP2))
+
+#define IS_COMP_DAC1SWITCH_INSTANCE(INSTANCE) ((INSTANCE) == COMP1)
+
+#define IS_COMP_WINDOWMODE_INSTANCE(INSTANCE) ((INSTANCE) == COMP2)
+
+/****************************** CEC Instances *********************************/
+#define IS_CEC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CEC)
+
+/****************************** CRC Instances *********************************/
+#define IS_CRC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CRC)
+
+/******************************* DAC Instances ********************************/
+#define IS_DAC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == DAC)
+
+/******************************* DMA Instances ******************************/
+#define IS_DMA_ALL_INSTANCE(INSTANCE) (((INSTANCE) == DMA1_Channel1) || \
+ ((INSTANCE) == DMA1_Channel2) || \
+ ((INSTANCE) == DMA1_Channel3) || \
+ ((INSTANCE) == DMA1_Channel4) || \
+ ((INSTANCE) == DMA1_Channel5))
+
+/****************************** GPIO Instances ********************************/
+#define IS_GPIO_ALL_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB) || \
+ ((INSTANCE) == GPIOC) || \
+ ((INSTANCE) == GPIOD) || \
+ ((INSTANCE) == GPIOF))
+
+#define IS_GPIO_AF_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB))
+
+#define IS_GPIO_LOCK_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB))
+
+/****************************** I2C Instances *********************************/
+#define IS_I2C_ALL_INSTANCE(INSTANCE) (((INSTANCE) == I2C1) || \
+ ((INSTANCE) == I2C2))
+
+/****************************** I2S Instances *********************************/
+#define IS_I2S_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
+ ((INSTANCE) == SPI2))
+
+/****************************** IWDG Instances ********************************/
+#define IS_IWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == IWDG)
+
+/****************************** RTC Instances *********************************/
+#define IS_RTC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == RTC)
+
+/****************************** SMBUS Instances *********************************/
+#define IS_SMBUS_ALL_INSTANCE(INSTANCE) ((INSTANCE) == I2C1)
+
+/****************************** SPI Instances *********************************/
+#define IS_SPI_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
+ ((INSTANCE) == SPI2))
+
+/****************************** TIM Instances *********************************/
+#define IS_TIM_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM6) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CC1_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CC2_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_CC3_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CC4_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_TIX_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_ENCODER_INTERFACE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_HALL_INTERFACE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1))
+
+#define IS_TIM_XOR_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_MASTER_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM6) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_SLAVE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_32B_COUNTER_INSTANCE(INSTANCE)\
+ ((INSTANCE) == TIM2)
+
+#define IS_TIM_DMABURST_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_BREAK_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CCX_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM2) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM3) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM14) && \
+ (((CHANNEL) == TIM_CHANNEL_1))) \
+ || \
+ (((INSTANCE) == TIM15) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))) \
+ || \
+ (((INSTANCE) == TIM16) && \
+ (((CHANNEL) == TIM_CHANNEL_1))) \
+ || \
+ (((INSTANCE) == TIM17) && \
+ (((CHANNEL) == TIM_CHANNEL_1))))
+
+#define IS_TIM_CCXN_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3))) \
+ || \
+ (((INSTANCE) == TIM15) && \
+ ((CHANNEL) == TIM_CHANNEL_1)) \
+ || \
+ (((INSTANCE) == TIM16) && \
+ ((CHANNEL) == TIM_CHANNEL_1)) \
+ || \
+ (((INSTANCE) == TIM17) && \
+ ((CHANNEL) == TIM_CHANNEL_1)))
+
+#define IS_TIM_COUNTER_MODE_SELECT_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_REPETITION_COUNTER_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CLOCK_DIVISION_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_DMA_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM6) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_DMA_CC_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_COMMUTATION_EVENT_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_REMAP_INSTANCE(INSTANCE)\
+ ((INSTANCE) == TIM14)
+
+/****************************** TSC Instances *********************************/
+#define IS_TSC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == TSC)
+
+/*********************** UART Instances : IRDA mode ***************************/
+#define IS_IRDA_INSTANCE(INSTANCE) ((INSTANCE) == USART1)
+
+/********************* UART Instances : Smard card mode ***********************/
+#define IS_SMARTCARD_INSTANCE(INSTANCE) ((INSTANCE) == USART1)
+
+/******************** USART Instances : Synchronous mode **********************/
+#define IS_USART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/******************** USART Instances : auto Baud rate detection **************/
+#define IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(INSTANCE) ((INSTANCE) == USART1)
+
+/******************** UART Instances : Asynchronous mode **********************/
+#define IS_UART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/******************** UART Instances : Half-Duplex mode **********************/
+#define IS_UART_HALFDUPLEX_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/****************** UART Instances : Hardware Flow control ********************/
+#define IS_UART_HWFLOW_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/****************** UART Instances : LIN mode ********************/
+#define IS_UART_LIN_INSTANCE(INSTANCE) ((INSTANCE) == USART1)
+
+/****************** UART Instances : wakeup from stop mode ********************/
+#define IS_UART_WAKEUP_INSTANCE(INSTANCE) ((INSTANCE) == USART1)
+
+/****************** UART Instances : Auto Baud Rate detection ********************/
+#define IS_UART_AUTOBAUDRATE_DETECTION_INSTANCE(INSTANCE) ((INSTANCE) == USART1)
+
+/****************** UART Instances : Driver enable detection ********************/
+#define IS_UART_DRIVER_ENABLE_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/****************************** WWDG Instances ********************************/
+#define IS_WWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == WWDG)
+
+/**
+ * @}
+ */
+
+
+/******************************************************************************/
+/* For a painless codes migration between the STM32F0xx device product */
+/* lines, the aliases defined below are put in place to overcome the */
+/* differences in the interrupt handlers and IRQn definitions. */
+/* No need to update developed interrupt code when moving across */
+/* product lines within the same STM32F0 Family */
+/******************************************************************************/
+
+/* Aliases for __IRQn */
+#define RCC_CRS_IRQn RCC_IRQn
+#define DMA1_Channel4_5_6_7_IRQn DMA1_Channel4_5_IRQn
+#define ADC1_IRQn ADC1_COMP_IRQn
+#define TIM6_IRQn TIM6_DAC_IRQn
+
+/* Aliases for __IRQHandler */
+#define RCC_CRS_IRQHandler RCC_IRQHandler
+#define DMA1_Channel4_5_6_7_IRQHandler DMA1_Channel4_5_IRQHandler
+#define ADC1_IRQHandler ADC1_COMP_IRQHandler
+#define TIM6_IRQHandler TIM6_DAC_IRQHandler
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F058x8_H */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/include/devices/stm32f070x6.h b/f0/include/devices/stm32f070x6.h
new file mode 100755
index 0000000000000000000000000000000000000000..23f5ff10324fba8efb0ae4a71addf99cd23982ab
--- /dev/null
+++ b/f0/include/devices/stm32f070x6.h
@@ -0,0 +1,3346 @@
+/**
+ ******************************************************************************
+ * @file stm32f070x6.h
+ * @author MCD Application Team
+ * @version V2.2.1
+ * @date 09-January-2015
+ * @brief CMSIS STM32F070x6 Devices Peripheral Access Layer Header File.
+ *
+ * This file contains:
+ * - Data structures and the address mapping for all peripherals
+ * - Peripheral's registers declarations and bits definition
+ * - Macros to access peripheral’s registers hardware
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS_Device
+ * @{
+ */
+
+/** @addtogroup stm32f070x6
+ * @{
+ */
+
+#ifndef __STM32F070x6_H
+#define __STM32F070x6_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+
+/**
+ * @brief Configuration of the Cortex-M0 Processor and Core Peripherals
+ */
+#define __CM0_REV 0 /*!< Core Revision r0p0 */
+#define __MPU_PRESENT 0 /*!< STM32F0xx do not provide MPU */
+#define __NVIC_PRIO_BITS 2 /*!< STM32F0xx uses 2 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F070x6 device Interrupt Number Definition
+ */
+typedef enum
+{
+/****** Cortex-M0 Processor Exceptions Numbers **************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */
+ SVC_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */
+
+/****** STM32F070x6 specific Interrupt Numbers **************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ RTC_IRQn = 2, /*!< RTC Interrupt through EXTI Lines 17, 19 and 20 */
+ FLASH_IRQn = 3, /*!< FLASH global Interrupt */
+ RCC_IRQn = 4, /*!< RCC Global Interrupts */
+ EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupts */
+ EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupts */
+ EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupts */
+ DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */
+ DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupts */
+ DMA1_Channel4_5_IRQn = 11, /*!< DMA1 Channel 4 and Channel 5 Interrupts */
+ ADC1_IRQn = 12, /*!< ADC1 Interrupt */
+ TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupts */
+ TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */
+ TIM3_IRQn = 16, /*!< TIM3 global Interrupt */
+ TIM14_IRQn = 19, /*!< TIM14 global Interrupt */
+ TIM16_IRQn = 21, /*!< TIM16 global Interrupt */
+ TIM17_IRQn = 22, /*!< TIM17 global Interrupt */
+ I2C1_IRQn = 23, /*!< I2C1 Event Interrupt & EXTI Line23 Interrupt (I2C1 wakeup) */
+ SPI1_IRQn = 25, /*!< SPI1 global Interrupt */
+ USART1_IRQn = 27, /*!< USART1 global Interrupt & EXTI Line25 Interrupt (USART1 wakeup) */
+ USART2_IRQn = 28, /*!< USART2 global Interrupt */
+ USB_IRQn = 31 /*!< USB global Interrupts & EXTI Line18 Interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm0.h" /* Cortex-M0 processor and core peripherals */
+#include "system_stm32f0xx.h" /* STM32F0xx System Header */
+#include <stdint.h>
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< ADC Interrupt and Status register, Address offset:0x00 */
+ __IO uint32_t IER; /*!< ADC Interrupt Enable register, Address offset:0x04 */
+ __IO uint32_t CR; /*!< ADC Control register, Address offset:0x08 */
+ __IO uint32_t CFGR1; /*!< ADC Configuration register 1, Address offset:0x0C */
+ __IO uint32_t CFGR2; /*!< ADC Configuration register 2, Address offset:0x10 */
+ __IO uint32_t SMPR; /*!< ADC Sampling time register, Address offset:0x14 */
+ uint32_t RESERVED1; /*!< Reserved, 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, 0x1C */
+ __IO uint32_t TR; /*!< ADC watchdog threshold register, Address offset:0x20 */
+ uint32_t RESERVED3; /*!< Reserved, 0x24 */
+ __IO uint32_t CHSELR; /*!< ADC channel selection register, Address offset:0x28 */
+ uint32_t RESERVED4[5]; /*!< Reserved, 0x2C */
+ __IO uint32_t DR; /*!< ADC data register, Address offset:0x40 */
+}ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CCR;
+}ADC_Common_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+ uint32_t RESERVED2; /*!< Reserved, 0x0C */
+ __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */
+ __IO uint32_t RESERVED3; /*!< Reserved, 0x14 */
+}CRC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< DMA channel x configuration register */
+ __IO uint32_t CNDTR; /*!< DMA channel x number of data register */
+ __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */
+ __IO uint32_t CMAR; /*!< DMA channel x memory address register */
+}DMA_Channel_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */
+ __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */
+}DMA_TypeDef;
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!<EXTI Interrupt mask register, Address offset: 0x00 */
+ __IO uint32_t EMR; /*!<EXTI Event mask register, Address offset: 0x04 */
+ __IO uint32_t RTSR; /*!<EXTI Rising trigger selection register , Address offset: 0x08 */
+ __IO uint32_t FTSR; /*!<EXTI Falling trigger selection register, Address offset: 0x0C */
+ __IO uint32_t SWIER; /*!<EXTI Software interrupt event register, Address offset: 0x10 */
+ __IO uint32_t PR; /*!<EXTI Pending register, Address offset: 0x14 */
+}EXTI_TypeDef;
+
+/**
+ * @brief FLASH Registers
+ */
+typedef struct
+{
+ __IO uint32_t ACR; /*!<FLASH access control register, Address offset: 0x00 */
+ __IO uint32_t KEYR; /*!<FLASH key register, Address offset: 0x04 */
+ __IO uint32_t OPTKEYR; /*!<FLASH OPT key register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!<FLASH status register, Address offset: 0x0C */
+ __IO uint32_t CR; /*!<FLASH control register, Address offset: 0x10 */
+ __IO uint32_t AR; /*!<FLASH address register, Address offset: 0x14 */
+ __IO uint32_t RESERVED; /*!< Reserved, 0x18 */
+ __IO uint32_t OBR; /*!<FLASH option bytes register, Address offset: 0x1C */
+ __IO uint32_t WRPR; /*!<FLASH option bytes register, Address offset: 0x20 */
+}FLASH_TypeDef;
+
+
+/**
+ * @brief Option Bytes Registers
+ */
+typedef struct
+{
+ __IO uint16_t RDP; /*!< FLASH option byte Read protection, Address offset: 0x00 */
+ __IO uint16_t USER; /*!< FLASH option byte user options, Address offset: 0x02 */
+ __IO uint16_t DATA0; /*!< User data byte 0 (stored in FLASH_OBR[23:16]), Address offset: 0x04 */
+ __IO uint16_t DATA1; /*!< User data byte 1 (stored in FLASH_OBR[31:24]), Address offset: 0x06 */
+ __IO uint16_t WRP0; /*!< FLASH option byte write protection 0, Address offset: 0x08 */
+ __IO uint16_t WRP1; /*!< FLASH option byte write protection 1, Address offset: 0x0A */
+ __IO uint16_t WRP2; /*!< FLASH option byte write protection 2, Address offset: 0x0C */
+ __IO uint16_t WRP3; /*!< FLASH option byte write protection 3, Address offset: 0x0E */
+}OB_TypeDef;
+
+/**
+ * @brief General Purpose I/O
+ */
+
+typedef struct
+{
+ __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */
+ __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */
+ __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */
+ __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */
+ __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */
+ __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */
+ __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x1A */
+ __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */
+ __IO uint32_t AFR[2]; /*!< GPIO alternate function low register, Address offset: 0x20-0x24 */
+ __IO uint32_t BRR; /*!< GPIO bit reset register, Address offset: 0x28 */
+}GPIO_TypeDef;
+
+/**
+ * @brief SysTem Configuration
+ */
+
+typedef struct
+{
+ __IO uint32_t CFGR1; /*!< SYSCFG configuration register 1, Address offset: 0x00 */
+ uint32_t RESERVED; /*!< Reserved, 0x04 */
+ __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration register, Address offset: 0x14-0x08 */
+ __IO uint32_t CFGR2; /*!< SYSCFG configuration register 2, Address offset: 0x18 */
+}SYSCFG_TypeDef;
+
+/**
+ * @brief Inter-integrated Circuit Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */
+ __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */
+ __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */
+ __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */
+ __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */
+ __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */
+ __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */
+ __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */
+ __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */
+ __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */
+}I2C_TypeDef;
+
+/**
+ * @brief Independent WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */
+ __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */
+ __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */
+ __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */
+}IWDG_TypeDef;
+
+/**
+ * @brief Power Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< PWR power control register, Address offset: 0x00 */
+ __IO uint32_t CSR; /*!< PWR power control/status register, Address offset: 0x04 */
+}PWR_TypeDef;
+
+/**
+ * @brief Reset and Clock Control
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */
+ __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x04 */
+ __IO uint32_t CIR; /*!< RCC clock interrupt register, Address offset: 0x08 */
+ __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x0C */
+ __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x10 */
+ __IO uint32_t AHBENR; /*!< RCC AHB peripheral clock register, Address offset: 0x14 */
+ __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x18 */
+ __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x1C */
+ __IO uint32_t BDCR; /*!< RCC Backup domain control register, Address offset: 0x20 */
+ __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x24 */
+ __IO uint32_t AHBRSTR; /*!< RCC AHB peripheral reset register, Address offset: 0x28 */
+ __IO uint32_t CFGR2; /*!< RCC clock configuration register 2, Address offset: 0x2C */
+ __IO uint32_t CFGR3; /*!< RCC clock configuration register 3, Address offset: 0x30 */
+ __IO uint32_t CR2; /*!< RCC clock control register 2, Address offset: 0x34 */
+}RCC_TypeDef;
+
+/**
+ * @brief Real-Time Clock
+ */
+
+typedef struct
+{
+ __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */
+ __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */
+ uint32_t RESERVED1; /*!< Reserved, Address offset: 0x14 */
+ uint32_t RESERVED2; /*!< Reserved, Address offset: 0x18 */
+ __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */
+ uint32_t RESERVED3; /*!< Reserved, Address offset: 0x20 */
+ __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */
+ __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */
+ __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */
+ __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */
+ __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */
+ __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */
+ __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */
+ __IO uint32_t TAFCR; /*!< RTC tamper and alternate function configuration register, Address offset: 0x40 */
+ __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */
+}RTC_TypeDef;
+
+/**
+ * @brief Serial Peripheral Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< SPI Control register 1 (not used in I2S mode), Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */
+ __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */
+ __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */
+ __IO uint32_t RXCRCR; /*!< SPI Rx CRC register (not used in I2S mode), Address offset: 0x14 */
+ __IO uint32_t TXCRCR; /*!< SPI Tx CRC register (not used in I2S mode), Address offset: 0x18 */
+ __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */
+ __IO uint32_t RESERVED1;/*!< Reserved, Address offset: 0x20 */
+}SPI_TypeDef;
+
+/**
+ * @brief TIM
+ */
+typedef struct
+{
+ __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */
+ __IO uint32_t SMCR; /*!< TIM slave Mode Control register, Address offset: 0x08 */
+ __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */
+ __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */
+ __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */
+ __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */
+ __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */
+ __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */
+ __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */
+ __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */
+ __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */
+ __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */
+ __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */
+ __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */
+ __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */
+ __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */
+ __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */
+ __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */
+ __IO uint32_t DMAR; /*!< TIM DMA address for full transfer register, Address offset: 0x4C */
+ __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */
+}TIM_TypeDef;
+
+
+/**
+ * @brief Universal Synchronous Asynchronous Receiver Transmitter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */
+ __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */
+ __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */
+ __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */
+ __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */
+ __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */
+ __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */
+ __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */
+ __IO uint16_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */
+ uint16_t RESERVED1; /*!< Reserved, 0x26 */
+ __IO uint16_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */
+ uint16_t RESERVED2; /*!< Reserved, 0x2A */
+}USART_TypeDef;
+
+/**
+ * @brief Universal Serial Bus Full Speed Device
+ */
+
+typedef struct
+{
+ __IO uint16_t EP0R; /*!< USB Endpoint 0 register, Address offset: 0x00 */
+ __IO uint16_t RESERVED0; /*!< Reserved */
+ __IO uint16_t EP1R; /*!< USB Endpoint 1 register, Address offset: 0x04 */
+ __IO uint16_t RESERVED1; /*!< Reserved */
+ __IO uint16_t EP2R; /*!< USB Endpoint 2 register, Address offset: 0x08 */
+ __IO uint16_t RESERVED2; /*!< Reserved */
+ __IO uint16_t EP3R; /*!< USB Endpoint 3 register, Address offset: 0x0C */
+ __IO uint16_t RESERVED3; /*!< Reserved */
+ __IO uint16_t EP4R; /*!< USB Endpoint 4 register, Address offset: 0x10 */
+ __IO uint16_t RESERVED4; /*!< Reserved */
+ __IO uint16_t EP5R; /*!< USB Endpoint 5 register, Address offset: 0x14 */
+ __IO uint16_t RESERVED5; /*!< Reserved */
+ __IO uint16_t EP6R; /*!< USB Endpoint 6 register, Address offset: 0x18 */
+ __IO uint16_t RESERVED6; /*!< Reserved */
+ __IO uint16_t EP7R; /*!< USB Endpoint 7 register, Address offset: 0x1C */
+ __IO uint16_t RESERVED7[17]; /*!< Reserved */
+ __IO uint16_t CNTR; /*!< Control register, Address offset: 0x40 */
+ __IO uint16_t RESERVED8; /*!< Reserved */
+ __IO uint16_t ISTR; /*!< Interrupt status register, Address offset: 0x44 */
+ __IO uint16_t RESERVED9; /*!< Reserved */
+ __IO uint16_t FNR; /*!< Frame number register, Address offset: 0x48 */
+ __IO uint16_t RESERVEDA; /*!< Reserved */
+ __IO uint16_t DADDR; /*!< Device address register, Address offset: 0x4C */
+ __IO uint16_t RESERVEDB; /*!< Reserved */
+ __IO uint16_t BTABLE; /*!< Buffer Table address register, Address offset: 0x50 */
+ __IO uint16_t RESERVEDC; /*!< Reserved */
+ __IO uint16_t LPMCSR; /*!< LPM Control and Status register, Address offset: 0x54 */
+ __IO uint16_t RESERVEDD; /*!< Reserved */
+ __IO uint16_t BCDR; /*!< Battery Charging detector register, Address offset: 0x58 */
+ __IO uint16_t RESERVEDE; /*!< Reserved */
+}USB_TypeDef;
+
+/**
+ * @brief Window WATCHDOG
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */
+ __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */
+}WWDG_TypeDef;
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_memory_map
+ * @{
+ */
+
+#define FLASH_BASE ((uint32_t)0x08000000) /*!< FLASH base address in the alias region */
+#define SRAM_BASE ((uint32_t)0x20000000) /*!< SRAM base address in the alias region */
+#define PERIPH_BASE ((uint32_t)0x40000000) /*!< Peripheral base address in the alias region */
+
+/*!< Peripheral memory map */
+#define APBPERIPH_BASE PERIPH_BASE
+#define AHBPERIPH_BASE (PERIPH_BASE + 0x00020000)
+#define AHB2PERIPH_BASE (PERIPH_BASE + 0x08000000)
+
+#define TIM3_BASE (APBPERIPH_BASE + 0x00000400)
+#define TIM14_BASE (APBPERIPH_BASE + 0x00002000)
+#define RTC_BASE (APBPERIPH_BASE + 0x00002800)
+#define WWDG_BASE (APBPERIPH_BASE + 0x00002C00)
+#define IWDG_BASE (APBPERIPH_BASE + 0x00003000)
+#define USART2_BASE (APBPERIPH_BASE + 0x00004400)
+#define I2C1_BASE (APBPERIPH_BASE + 0x00005400)
+#define USB_BASE (APBPERIPH_BASE + 0x00005C00) /*!< USB_IP Peripheral Registers base address */
+#define USB_PMAADDR (APBPERIPH_BASE + 0x00006000) /*!< USB_IP Packet Memory Area base address */
+#define PWR_BASE (APBPERIPH_BASE + 0x00007000)
+#define SYSCFG_BASE (APBPERIPH_BASE + 0x00010000)
+#define EXTI_BASE (APBPERIPH_BASE + 0x00010400)
+#define ADC1_BASE (APBPERIPH_BASE + 0x00012400)
+#define ADC_BASE (APBPERIPH_BASE + 0x00012708)
+#define TIM1_BASE (APBPERIPH_BASE + 0x00012C00)
+#define SPI1_BASE (APBPERIPH_BASE + 0x00013000)
+#define USART1_BASE (APBPERIPH_BASE + 0x00013800)
+#define TIM16_BASE (APBPERIPH_BASE + 0x00014400)
+#define TIM17_BASE (APBPERIPH_BASE + 0x00014800)
+#define DBGMCU_BASE (APBPERIPH_BASE + 0x00015800)
+
+#define DMA1_BASE (AHBPERIPH_BASE + 0x00000000)
+#define DMA1_Channel1_BASE (DMA1_BASE + 0x00000008)
+#define DMA1_Channel2_BASE (DMA1_BASE + 0x0000001C)
+#define DMA1_Channel3_BASE (DMA1_BASE + 0x00000030)
+#define DMA1_Channel4_BASE (DMA1_BASE + 0x00000044)
+#define DMA1_Channel5_BASE (DMA1_BASE + 0x00000058)
+
+#define RCC_BASE (AHBPERIPH_BASE + 0x00001000)
+#define FLASH_R_BASE (AHBPERIPH_BASE + 0x00002000) /*!< FLASH registers base address */
+#define OB_BASE ((uint32_t)0x1FFFF800) /*!< FLASH Option Bytes base address */
+#define CRC_BASE (AHBPERIPH_BASE + 0x00003000)
+
+#define GPIOA_BASE (AHB2PERIPH_BASE + 0x00000000)
+#define GPIOB_BASE (AHB2PERIPH_BASE + 0x00000400)
+#define GPIOC_BASE (AHB2PERIPH_BASE + 0x00000800)
+#define GPIOF_BASE (AHB2PERIPH_BASE + 0x00001400)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_declaration
+ * @{
+ */
+
+#define TIM3 ((TIM_TypeDef *) TIM3_BASE)
+#define TIM14 ((TIM_TypeDef *) TIM14_BASE)
+#define RTC ((RTC_TypeDef *) RTC_BASE)
+#define WWDG ((WWDG_TypeDef *) WWDG_BASE)
+#define IWDG ((IWDG_TypeDef *) IWDG_BASE)
+#define USART2 ((USART_TypeDef *) USART2_BASE)
+#define I2C1 ((I2C_TypeDef *) I2C1_BASE)
+#define PWR ((PWR_TypeDef *) PWR_BASE)
+#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE)
+#define EXTI ((EXTI_TypeDef *) EXTI_BASE)
+#define ADC1 ((ADC_TypeDef *) ADC1_BASE)
+#define ADC ((ADC_Common_TypeDef *) ADC_BASE)
+#define TIM1 ((TIM_TypeDef *) TIM1_BASE)
+#define SPI1 ((SPI_TypeDef *) SPI1_BASE)
+#define USART1 ((USART_TypeDef *) USART1_BASE)
+#define TIM16 ((TIM_TypeDef *) TIM16_BASE)
+#define TIM17 ((TIM_TypeDef *) TIM17_BASE)
+#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE)
+#define DMA1 ((DMA_TypeDef *) DMA1_BASE)
+#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE)
+#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE)
+#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE)
+#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE)
+#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE)
+#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE)
+#define OB ((OB_TypeDef *) OB_BASE)
+#define RCC ((RCC_TypeDef *) RCC_BASE)
+#define CRC ((CRC_TypeDef *) CRC_BASE)
+#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE)
+#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE)
+#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE)
+#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE)
+#define USB ((USB_TypeDef *) USB_BASE)
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_constants
+ * @{
+ */
+
+ /** @addtogroup Peripheral_Registers_Bits_Definition
+ * @{
+ */
+
+/******************************************************************************/
+/* Peripheral Registers Bits Definition */
+/******************************************************************************/
+/******************************************************************************/
+/* */
+/* Analog to Digital Converter (ADC) */
+/* */
+/******************************************************************************/
+/******************** Bits definition for ADC_ISR register ******************/
+#define ADC_ISR_AWD ((uint32_t)0x00000080) /*!< Analog watchdog flag */
+#define ADC_ISR_OVR ((uint32_t)0x00000010) /*!< Overrun flag */
+#define ADC_ISR_EOSEQ ((uint32_t)0x00000008) /*!< End of Sequence flag */
+#define ADC_ISR_EOC ((uint32_t)0x00000004) /*!< End of Conversion */
+#define ADC_ISR_EOSMP ((uint32_t)0x00000002) /*!< End of sampling flag */
+#define ADC_ISR_ADRDY ((uint32_t)0x00000001) /*!< ADC Ready */
+
+/* Old EOSEQ bit definition, maintained for legacy purpose */
+#define ADC_ISR_EOS ADC_ISR_EOSEQ
+
+/******************** Bits definition for ADC_IER register ******************/
+#define ADC_IER_AWDIE ((uint32_t)0x00000080) /*!< Analog Watchdog interrupt enable */
+#define ADC_IER_OVRIE ((uint32_t)0x00000010) /*!< Overrun interrupt enable */
+#define ADC_IER_EOSEQIE ((uint32_t)0x00000008) /*!< End of Sequence of conversion interrupt enable */
+#define ADC_IER_EOCIE ((uint32_t)0x00000004) /*!< End of Conversion interrupt enable */
+#define ADC_IER_EOSMPIE ((uint32_t)0x00000002) /*!< End of sampling interrupt enable */
+#define ADC_IER_ADRDYIE ((uint32_t)0x00000001) /*!< ADC Ready interrupt enable */
+
+/* Old EOSEQIE bit definition, maintained for legacy purpose */
+#define ADC_IER_EOSIE ADC_IER_EOSEQIE
+
+/******************** Bits definition for ADC_CR register *******************/
+#define ADC_CR_ADCAL ((uint32_t)0x80000000) /*!< ADC calibration */
+#define ADC_CR_ADSTP ((uint32_t)0x00000010) /*!< ADC stop of conversion command */
+#define ADC_CR_ADSTART ((uint32_t)0x00000004) /*!< ADC start of conversion */
+#define ADC_CR_ADDIS ((uint32_t)0x00000002) /*!< ADC disable command */
+#define ADC_CR_ADEN ((uint32_t)0x00000001) /*!< ADC enable control */
+
+/******************* Bits definition for ADC_CFGR1 register *****************/
+#define ADC_CFGR1_AWDCH ((uint32_t)0x7C000000) /*!< AWDCH[4:0] bits (Analog watchdog channel select bits) */
+#define ADC_CFGR1_AWDCH_0 ((uint32_t)0x04000000) /*!< Bit 0 */
+#define ADC_CFGR1_AWDCH_1 ((uint32_t)0x08000000) /*!< Bit 1 */
+#define ADC_CFGR1_AWDCH_2 ((uint32_t)0x10000000) /*!< Bit 2 */
+#define ADC_CFGR1_AWDCH_3 ((uint32_t)0x20000000) /*!< Bit 3 */
+#define ADC_CFGR1_AWDCH_4 ((uint32_t)0x40000000) /*!< Bit 4 */
+#define ADC_CFGR1_AWDEN ((uint32_t)0x00800000) /*!< Analog watchdog enable on regular channels */
+#define ADC_CFGR1_AWDSGL ((uint32_t)0x00400000) /*!< Enable the watchdog on a single channel or on all channels */
+#define ADC_CFGR1_DISCEN ((uint32_t)0x00010000) /*!< Discontinuous mode on regular channels */
+#define ADC_CFGR1_AUTOFF ((uint32_t)0x00008000) /*!< ADC auto power off */
+#define ADC_CFGR1_WAIT ((uint32_t)0x00004000) /*!< ADC wait conversion mode */
+#define ADC_CFGR1_CONT ((uint32_t)0x00002000) /*!< Continuous Conversion */
+#define ADC_CFGR1_OVRMOD ((uint32_t)0x00001000) /*!< Overrun mode */
+#define ADC_CFGR1_EXTEN ((uint32_t)0x00000C00) /*!< EXTEN[1:0] bits (External Trigger Conversion mode for regular channels) */
+#define ADC_CFGR1_EXTEN_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define ADC_CFGR1_EXTEN_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define ADC_CFGR1_EXTSEL ((uint32_t)0x000001C0) /*!< EXTSEL[2:0] bits (External Event Select for regular group) */
+#define ADC_CFGR1_EXTSEL_0 ((uint32_t)0x00000040) /*!< Bit 0 */
+#define ADC_CFGR1_EXTSEL_1 ((uint32_t)0x00000080) /*!< Bit 1 */
+#define ADC_CFGR1_EXTSEL_2 ((uint32_t)0x00000100) /*!< Bit 2 */
+#define ADC_CFGR1_ALIGN ((uint32_t)0x00000020) /*!< Data Alignment */
+#define ADC_CFGR1_RES ((uint32_t)0x00000018) /*!< RES[1:0] bits (Resolution) */
+#define ADC_CFGR1_RES_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define ADC_CFGR1_RES_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define ADC_CFGR1_SCANDIR ((uint32_t)0x00000004) /*!< Sequence scan direction */
+#define ADC_CFGR1_DMACFG ((uint32_t)0x00000002) /*!< Direct memory access configuration */
+#define ADC_CFGR1_DMAEN ((uint32_t)0x00000001) /*!< Direct memory access enable */
+
+/* Old WAIT bit definition, maintained for legacy purpose */
+#define ADC_CFGR1_AUTDLY ADC_CFGR1_WAIT
+
+/******************* Bits definition for ADC_CFGR2 register *****************/
+#define ADC_CFGR2_CKMODE ((uint32_t)0xC0000000) /*!< ADC clock mode */
+#define ADC_CFGR2_CKMODE_1 ((uint32_t)0x80000000) /*!< ADC clocked by PCLK div4 */
+#define ADC_CFGR2_CKMODE_0 ((uint32_t)0x40000000) /*!< ADC clocked by PCLK div2 */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_CFGR2_JITOFFDIV4 ADC_CFGR2_CKMODE_1 /*!< ADC clocked by PCLK div4 */
+#define ADC_CFGR2_JITOFFDIV2 ADC_CFGR2_CKMODE_0 /*!< ADC clocked by PCLK div2 */
+
+/****************** Bit definition for ADC_SMPR register ********************/
+#define ADC_SMPR_SMP ((uint32_t)0x00000007) /*!< SMP[2:0] bits (Sampling time selection) */
+#define ADC_SMPR_SMP_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define ADC_SMPR_SMP_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define ADC_SMPR_SMP_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_SMPR1_SMPR ADC_SMPR_SMP /*!< SMP[2:0] bits (Sampling time selection) */
+#define ADC_SMPR1_SMPR_0 ADC_SMPR_SMP_0 /*!< Bit 0 */
+#define ADC_SMPR1_SMPR_1 ADC_SMPR_SMP_1 /*!< Bit 1 */
+#define ADC_SMPR1_SMPR_2 ADC_SMPR_SMP_2 /*!< Bit 2 */
+
+/******************* Bit definition for ADC_TR register ********************/
+#define ADC_TR_HT ((uint32_t)0x0FFF0000) /*!< Analog watchdog high threshold */
+#define ADC_TR_LT ((uint32_t)0x00000FFF) /*!< Analog watchdog low threshold */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_HTR_HT ADC_TR_HT /*!< Analog watchdog high threshold */
+#define ADC_LTR_LT ADC_TR_LT /*!< Analog watchdog low threshold */
+
+/****************** Bit definition for ADC_CHSELR register ******************/
+#define ADC_CHSELR_CHSEL18 ((uint32_t)0x00040000) /*!< Channel 18 selection */
+#define ADC_CHSELR_CHSEL17 ((uint32_t)0x00020000) /*!< Channel 17 selection */
+#define ADC_CHSELR_CHSEL16 ((uint32_t)0x00010000) /*!< Channel 16 selection */
+#define ADC_CHSELR_CHSEL15 ((uint32_t)0x00008000) /*!< Channel 15 selection */
+#define ADC_CHSELR_CHSEL14 ((uint32_t)0x00004000) /*!< Channel 14 selection */
+#define ADC_CHSELR_CHSEL13 ((uint32_t)0x00002000) /*!< Channel 13 selection */
+#define ADC_CHSELR_CHSEL12 ((uint32_t)0x00001000) /*!< Channel 12 selection */
+#define ADC_CHSELR_CHSEL11 ((uint32_t)0x00000800) /*!< Channel 11 selection */
+#define ADC_CHSELR_CHSEL10 ((uint32_t)0x00000400) /*!< Channel 10 selection */
+#define ADC_CHSELR_CHSEL9 ((uint32_t)0x00000200) /*!< Channel 9 selection */
+#define ADC_CHSELR_CHSEL8 ((uint32_t)0x00000100) /*!< Channel 8 selection */
+#define ADC_CHSELR_CHSEL7 ((uint32_t)0x00000080) /*!< Channel 7 selection */
+#define ADC_CHSELR_CHSEL6 ((uint32_t)0x00000040) /*!< Channel 6 selection */
+#define ADC_CHSELR_CHSEL5 ((uint32_t)0x00000020) /*!< Channel 5 selection */
+#define ADC_CHSELR_CHSEL4 ((uint32_t)0x00000010) /*!< Channel 4 selection */
+#define ADC_CHSELR_CHSEL3 ((uint32_t)0x00000008) /*!< Channel 3 selection */
+#define ADC_CHSELR_CHSEL2 ((uint32_t)0x00000004) /*!< Channel 2 selection */
+#define ADC_CHSELR_CHSEL1 ((uint32_t)0x00000002) /*!< Channel 1 selection */
+#define ADC_CHSELR_CHSEL0 ((uint32_t)0x00000001) /*!< Channel 0 selection */
+
+/******************** Bit definition for ADC_DR register ********************/
+#define ADC_DR_DATA ((uint32_t)0x0000FFFF) /*!< Regular data */
+
+/******************* Bit definition for ADC_CCR register ********************/
+#define ADC_CCR_VBATEN ((uint32_t)0x01000000) /*!< Voltage battery enable */
+#define ADC_CCR_TSEN ((uint32_t)0x00800000) /*!< Tempurature sensore enable */
+#define ADC_CCR_VREFEN ((uint32_t)0x00400000) /*!< Vrefint enable */
+
+/******************************************************************************/
+/* */
+/* CRC calculation unit (CRC) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for CRC_DR register *********************/
+#define CRC_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data register bits */
+
+/******************* Bit definition for CRC_IDR register ********************/
+#define CRC_IDR_IDR ((uint8_t)0xFF) /*!< General-purpose 8-bit data register bits */
+
+/******************** Bit definition for CRC_CR register ********************/
+#define CRC_CR_RESET ((uint32_t)0x00000001) /*!< RESET the CRC computation unit bit */
+#define CRC_CR_REV_IN ((uint32_t)0x00000060) /*!< REV_IN Reverse Input Data bits */
+#define CRC_CR_REV_IN_0 ((uint32_t)0x00000020) /*!< REV_IN Bit 0 */
+#define CRC_CR_REV_IN_1 ((uint32_t)0x00000040) /*!< REV_IN Bit 1 */
+#define CRC_CR_REV_OUT ((uint32_t)0x00000080) /*!< REV_OUT Reverse Output Data bits */
+
+/******************* Bit definition for CRC_INIT register *******************/
+#define CRC_INIT_INIT ((uint32_t)0xFFFFFFFF) /*!< Initial CRC value bits */
+
+/******************************************************************************/
+/* */
+/* Debug MCU (DBGMCU) */
+/* */
+/******************************************************************************/
+
+/**************** Bit definition for DBGMCU_IDCODE register *****************/
+#define DBGMCU_IDCODE_DEV_ID ((uint32_t)0x00000FFF) /*!< Device Identifier */
+
+#define DBGMCU_IDCODE_REV_ID ((uint32_t)0xFFFF0000) /*!< REV_ID[15:0] bits (Revision Identifier) */
+#define DBGMCU_IDCODE_REV_ID_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define DBGMCU_IDCODE_REV_ID_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define DBGMCU_IDCODE_REV_ID_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define DBGMCU_IDCODE_REV_ID_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+#define DBGMCU_IDCODE_REV_ID_4 ((uint32_t)0x00100000) /*!< Bit 4 */
+#define DBGMCU_IDCODE_REV_ID_5 ((uint32_t)0x00200000) /*!< Bit 5 */
+#define DBGMCU_IDCODE_REV_ID_6 ((uint32_t)0x00400000) /*!< Bit 6 */
+#define DBGMCU_IDCODE_REV_ID_7 ((uint32_t)0x00800000) /*!< Bit 7 */
+#define DBGMCU_IDCODE_REV_ID_8 ((uint32_t)0x01000000) /*!< Bit 8 */
+#define DBGMCU_IDCODE_REV_ID_9 ((uint32_t)0x02000000) /*!< Bit 9 */
+#define DBGMCU_IDCODE_REV_ID_10 ((uint32_t)0x04000000) /*!< Bit 10 */
+#define DBGMCU_IDCODE_REV_ID_11 ((uint32_t)0x08000000) /*!< Bit 11 */
+#define DBGMCU_IDCODE_REV_ID_12 ((uint32_t)0x10000000) /*!< Bit 12 */
+#define DBGMCU_IDCODE_REV_ID_13 ((uint32_t)0x20000000) /*!< Bit 13 */
+#define DBGMCU_IDCODE_REV_ID_14 ((uint32_t)0x40000000) /*!< Bit 14 */
+#define DBGMCU_IDCODE_REV_ID_15 ((uint32_t)0x80000000) /*!< Bit 15 */
+
+/****************** Bit definition for DBGMCU_CR register *******************/
+#define DBGMCU_CR_DBG_STOP ((uint32_t)0x00000002) /*!< Debug Stop Mode */
+#define DBGMCU_CR_DBG_STANDBY ((uint32_t)0x00000004) /*!< Debug Standby mode */
+
+/****************** Bit definition for DBGMCU_APB1_FZ register **************/
+#define DBGMCU_APB1_FZ_DBG_TIM3_STOP ((uint32_t)0x00000002) /*!< TIM3 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM14_STOP ((uint32_t)0x00000100) /*!< TIM14 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_RTC_STOP ((uint32_t)0x00000400) /*!< RTC Calendar frozen when core is halted */
+#define DBGMCU_APB1_FZ_DBG_WWDG_STOP ((uint32_t)0x00000800) /*!< Debug Window Watchdog stopped when Core is halted */
+#define DBGMCU_APB1_FZ_DBG_IWDG_STOP ((uint32_t)0x00001000) /*!< Debug Independent Watchdog stopped when Core is halted */
+#define DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00200000) /*!< I2C1 SMBUS timeout mode stopped when Core is halted */
+
+/****************** Bit definition for DBGMCU_APB2_FZ register **************/
+#define DBGMCU_APB2_FZ_DBG_TIM1_STOP ((uint32_t)0x00000800) /*!< TIM1 counter stopped when core is halted */
+#define DBGMCU_APB2_FZ_DBG_TIM16_STOP ((uint32_t)0x00020000) /*!< TIM16 counter stopped when core is halted */
+#define DBGMCU_APB2_FZ_DBG_TIM17_STOP ((uint32_t)0x00040000) /*!< TIM17 counter stopped when core is halted */
+
+/******************************************************************************/
+/* */
+/* DMA Controller (DMA) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for DMA_ISR register ********************/
+#define DMA_ISR_GIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt flag */
+#define DMA_ISR_TCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete flag */
+#define DMA_ISR_HTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer flag */
+#define DMA_ISR_TEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error flag */
+#define DMA_ISR_GIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt flag */
+#define DMA_ISR_TCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete flag */
+#define DMA_ISR_HTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer flag */
+#define DMA_ISR_TEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error flag */
+#define DMA_ISR_GIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt flag */
+#define DMA_ISR_TCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete flag */
+#define DMA_ISR_HTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer flag */
+#define DMA_ISR_TEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error flag */
+#define DMA_ISR_GIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt flag */
+#define DMA_ISR_TCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete flag */
+#define DMA_ISR_HTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer flag */
+#define DMA_ISR_TEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error flag */
+#define DMA_ISR_GIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt flag */
+#define DMA_ISR_TCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete flag */
+#define DMA_ISR_HTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer flag */
+#define DMA_ISR_TEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error flag */
+
+/******************* Bit definition for DMA_IFCR register *******************/
+#define DMA_IFCR_CGIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt clear */
+#define DMA_IFCR_CTCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete clear */
+#define DMA_IFCR_CHTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer clear */
+#define DMA_IFCR_CTEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error clear */
+#define DMA_IFCR_CGIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt clear */
+#define DMA_IFCR_CTCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete clear */
+#define DMA_IFCR_CHTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer clear */
+#define DMA_IFCR_CTEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error clear */
+#define DMA_IFCR_CGIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt clear */
+#define DMA_IFCR_CTCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete clear */
+#define DMA_IFCR_CHTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer clear */
+#define DMA_IFCR_CTEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error clear */
+#define DMA_IFCR_CGIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt clear */
+#define DMA_IFCR_CTCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete clear */
+#define DMA_IFCR_CHTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer clear */
+#define DMA_IFCR_CTEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error clear */
+#define DMA_IFCR_CGIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt clear */
+#define DMA_IFCR_CTCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete clear */
+#define DMA_IFCR_CHTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer clear */
+#define DMA_IFCR_CTEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error clear */
+
+/******************* Bit definition for DMA_CCR register ********************/
+#define DMA_CCR_EN ((uint32_t)0x00000001) /*!< Channel enable */
+#define DMA_CCR_TCIE ((uint32_t)0x00000002) /*!< Transfer complete interrupt enable */
+#define DMA_CCR_HTIE ((uint32_t)0x00000004) /*!< Half Transfer interrupt enable */
+#define DMA_CCR_TEIE ((uint32_t)0x00000008) /*!< Transfer error interrupt enable */
+#define DMA_CCR_DIR ((uint32_t)0x00000010) /*!< Data transfer direction */
+#define DMA_CCR_CIRC ((uint32_t)0x00000020) /*!< Circular mode */
+#define DMA_CCR_PINC ((uint32_t)0x00000040) /*!< Peripheral increment mode */
+#define DMA_CCR_MINC ((uint32_t)0x00000080) /*!< Memory increment mode */
+
+#define DMA_CCR_PSIZE ((uint32_t)0x00000300) /*!< PSIZE[1:0] bits (Peripheral size) */
+#define DMA_CCR_PSIZE_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define DMA_CCR_PSIZE_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+
+#define DMA_CCR_MSIZE ((uint32_t)0x00000C00) /*!< MSIZE[1:0] bits (Memory size) */
+#define DMA_CCR_MSIZE_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define DMA_CCR_MSIZE_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+
+#define DMA_CCR_PL ((uint32_t)0x00003000) /*!< PL[1:0] bits(Channel Priority level)*/
+#define DMA_CCR_PL_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define DMA_CCR_PL_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+
+#define DMA_CCR_MEM2MEM ((uint32_t)0x00004000) /*!< Memory to memory mode */
+
+/****************** Bit definition for DMA_CNDTR register *******************/
+#define DMA_CNDTR_NDT ((uint32_t)0x0000FFFF) /*!< Number of data to Transfer */
+
+/****************** Bit definition for DMA_CPAR register ********************/
+#define DMA_CPAR_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */
+
+/****************** Bit definition for DMA_CMAR register ********************/
+#define DMA_CMAR_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */
+
+/******************************************************************************/
+/* */
+/* External Interrupt/Event Controller (EXTI) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for EXTI_IMR register *******************/
+#define EXTI_IMR_MR0 ((uint32_t)0x00000001) /*!< Interrupt Mask on line 0 */
+#define EXTI_IMR_MR1 ((uint32_t)0x00000002) /*!< Interrupt Mask on line 1 */
+#define EXTI_IMR_MR2 ((uint32_t)0x00000004) /*!< Interrupt Mask on line 2 */
+#define EXTI_IMR_MR3 ((uint32_t)0x00000008) /*!< Interrupt Mask on line 3 */
+#define EXTI_IMR_MR4 ((uint32_t)0x00000010) /*!< Interrupt Mask on line 4 */
+#define EXTI_IMR_MR5 ((uint32_t)0x00000020) /*!< Interrupt Mask on line 5 */
+#define EXTI_IMR_MR6 ((uint32_t)0x00000040) /*!< Interrupt Mask on line 6 */
+#define EXTI_IMR_MR7 ((uint32_t)0x00000080) /*!< Interrupt Mask on line 7 */
+#define EXTI_IMR_MR8 ((uint32_t)0x00000100) /*!< Interrupt Mask on line 8 */
+#define EXTI_IMR_MR9 ((uint32_t)0x00000200) /*!< Interrupt Mask on line 9 */
+#define EXTI_IMR_MR10 ((uint32_t)0x00000400) /*!< Interrupt Mask on line 10 */
+#define EXTI_IMR_MR11 ((uint32_t)0x00000800) /*!< Interrupt Mask on line 11 */
+#define EXTI_IMR_MR12 ((uint32_t)0x00001000) /*!< Interrupt Mask on line 12 */
+#define EXTI_IMR_MR13 ((uint32_t)0x00002000) /*!< Interrupt Mask on line 13 */
+#define EXTI_IMR_MR14 ((uint32_t)0x00004000) /*!< Interrupt Mask on line 14 */
+#define EXTI_IMR_MR15 ((uint32_t)0x00008000) /*!< Interrupt Mask on line 15 */
+#define EXTI_IMR_MR17 ((uint32_t)0x00020000) /*!< Interrupt Mask on line 17 */
+#define EXTI_IMR_MR18 ((uint32_t)0x00040000) /*!< Interrupt Mask on line 18 */
+#define EXTI_IMR_MR19 ((uint32_t)0x00080000) /*!< Interrupt Mask on line 19 */
+#define EXTI_IMR_MR23 ((uint32_t)0x00800000) /*!< Interrupt Mask on line 23 */
+
+/****************** Bit definition for EXTI_EMR register ********************/
+#define EXTI_EMR_MR0 ((uint32_t)0x00000001) /*!< Event Mask on line 0 */
+#define EXTI_EMR_MR1 ((uint32_t)0x00000002) /*!< Event Mask on line 1 */
+#define EXTI_EMR_MR2 ((uint32_t)0x00000004) /*!< Event Mask on line 2 */
+#define EXTI_EMR_MR3 ((uint32_t)0x00000008) /*!< Event Mask on line 3 */
+#define EXTI_EMR_MR4 ((uint32_t)0x00000010) /*!< Event Mask on line 4 */
+#define EXTI_EMR_MR5 ((uint32_t)0x00000020) /*!< Event Mask on line 5 */
+#define EXTI_EMR_MR6 ((uint32_t)0x00000040) /*!< Event Mask on line 6 */
+#define EXTI_EMR_MR7 ((uint32_t)0x00000080) /*!< Event Mask on line 7 */
+#define EXTI_EMR_MR8 ((uint32_t)0x00000100) /*!< Event Mask on line 8 */
+#define EXTI_EMR_MR9 ((uint32_t)0x00000200) /*!< Event Mask on line 9 */
+#define EXTI_EMR_MR10 ((uint32_t)0x00000400) /*!< Event Mask on line 10 */
+#define EXTI_EMR_MR11 ((uint32_t)0x00000800) /*!< Event Mask on line 11 */
+#define EXTI_EMR_MR12 ((uint32_t)0x00001000) /*!< Event Mask on line 12 */
+#define EXTI_EMR_MR13 ((uint32_t)0x00002000) /*!< Event Mask on line 13 */
+#define EXTI_EMR_MR14 ((uint32_t)0x00004000) /*!< Event Mask on line 14 */
+#define EXTI_EMR_MR15 ((uint32_t)0x00008000) /*!< Event Mask on line 15 */
+#define EXTI_EMR_MR17 ((uint32_t)0x00020000) /*!< Event Mask on line 17 */
+#define EXTI_EMR_MR18 ((uint32_t)0x00040000) /*!< Event Mask on line 18 */
+#define EXTI_EMR_MR19 ((uint32_t)0x00080000) /*!< Event Mask on line 19 */
+#define EXTI_EMR_MR23 ((uint32_t)0x00800000) /*!< Event Mask on line 23 */
+
+/******************* Bit definition for EXTI_RTSR register ******************/
+#define EXTI_RTSR_TR0 ((uint32_t)0x00000001) /*!< Rising trigger event configuration bit of line 0 */
+#define EXTI_RTSR_TR1 ((uint32_t)0x00000002) /*!< Rising trigger event configuration bit of line 1 */
+#define EXTI_RTSR_TR2 ((uint32_t)0x00000004) /*!< Rising trigger event configuration bit of line 2 */
+#define EXTI_RTSR_TR3 ((uint32_t)0x00000008) /*!< Rising trigger event configuration bit of line 3 */
+#define EXTI_RTSR_TR4 ((uint32_t)0x00000010) /*!< Rising trigger event configuration bit of line 4 */
+#define EXTI_RTSR_TR5 ((uint32_t)0x00000020) /*!< Rising trigger event configuration bit of line 5 */
+#define EXTI_RTSR_TR6 ((uint32_t)0x00000040) /*!< Rising trigger event configuration bit of line 6 */
+#define EXTI_RTSR_TR7 ((uint32_t)0x00000080) /*!< Rising trigger event configuration bit of line 7 */
+#define EXTI_RTSR_TR8 ((uint32_t)0x00000100) /*!< Rising trigger event configuration bit of line 8 */
+#define EXTI_RTSR_TR9 ((uint32_t)0x00000200) /*!< Rising trigger event configuration bit of line 9 */
+#define EXTI_RTSR_TR10 ((uint32_t)0x00000400) /*!< Rising trigger event configuration bit of line 10 */
+#define EXTI_RTSR_TR11 ((uint32_t)0x00000800) /*!< Rising trigger event configuration bit of line 11 */
+#define EXTI_RTSR_TR12 ((uint32_t)0x00001000) /*!< Rising trigger event configuration bit of line 12 */
+#define EXTI_RTSR_TR13 ((uint32_t)0x00002000) /*!< Rising trigger event configuration bit of line 13 */
+#define EXTI_RTSR_TR14 ((uint32_t)0x00004000) /*!< Rising trigger event configuration bit of line 14 */
+#define EXTI_RTSR_TR15 ((uint32_t)0x00008000) /*!< Rising trigger event configuration bit of line 15 */
+#define EXTI_RTSR_TR16 ((uint32_t)0x00010000) /*!< Rising trigger event configuration bit of line 16 */
+#define EXTI_RTSR_TR17 ((uint32_t)0x00020000) /*!< Rising trigger event configuration bit of line 17 */
+#define EXTI_RTSR_TR19 ((uint32_t)0x00080000) /*!< Rising trigger event configuration bit of line 19 */
+#define EXTI_RTSR_TR20 ((uint32_t)0x00100000) /*!< Rising trigger event configuration bit of line 20 */
+#define EXTI_RTSR_TR21 ((uint32_t)0x00200000) /*!< Rising trigger event configuration bit of line 21 */
+#define EXTI_RTSR_TR22 ((uint32_t)0x00400000) /*!< Rising trigger event configuration bit of line 22 */
+
+/******************* Bit definition for EXTI_FTSR register *******************/
+#define EXTI_FTSR_TR0 ((uint32_t)0x00000001) /*!< Falling trigger event configuration bit of line 0 */
+#define EXTI_FTSR_TR1 ((uint32_t)0x00000002) /*!< Falling trigger event configuration bit of line 1 */
+#define EXTI_FTSR_TR2 ((uint32_t)0x00000004) /*!< Falling trigger event configuration bit of line 2 */
+#define EXTI_FTSR_TR3 ((uint32_t)0x00000008) /*!< Falling trigger event configuration bit of line 3 */
+#define EXTI_FTSR_TR4 ((uint32_t)0x00000010) /*!< Falling trigger event configuration bit of line 4 */
+#define EXTI_FTSR_TR5 ((uint32_t)0x00000020) /*!< Falling trigger event configuration bit of line 5 */
+#define EXTI_FTSR_TR6 ((uint32_t)0x00000040) /*!< Falling trigger event configuration bit of line 6 */
+#define EXTI_FTSR_TR7 ((uint32_t)0x00000080) /*!< Falling trigger event configuration bit of line 7 */
+#define EXTI_FTSR_TR8 ((uint32_t)0x00000100) /*!< Falling trigger event configuration bit of line 8 */
+#define EXTI_FTSR_TR9 ((uint32_t)0x00000200) /*!< Falling trigger event configuration bit of line 9 */
+#define EXTI_FTSR_TR10 ((uint32_t)0x00000400) /*!< Falling trigger event configuration bit of line 10 */
+#define EXTI_FTSR_TR11 ((uint32_t)0x00000800) /*!< Falling trigger event configuration bit of line 11 */
+#define EXTI_FTSR_TR12 ((uint32_t)0x00001000) /*!< Falling trigger event configuration bit of line 12 */
+#define EXTI_FTSR_TR13 ((uint32_t)0x00002000) /*!< Falling trigger event configuration bit of line 13 */
+#define EXTI_FTSR_TR14 ((uint32_t)0x00004000) /*!< Falling trigger event configuration bit of line 14 */
+#define EXTI_FTSR_TR15 ((uint32_t)0x00008000) /*!< Falling trigger event configuration bit of line 15 */
+#define EXTI_FTSR_TR16 ((uint32_t)0x00010000) /*!< Falling trigger event configuration bit of line 16 */
+#define EXTI_FTSR_TR17 ((uint32_t)0x00020000) /*!< Falling trigger event configuration bit of line 17 */
+#define EXTI_FTSR_TR19 ((uint32_t)0x00080000) /*!< Falling trigger event configuration bit of line 19 */
+#define EXTI_FTSR_TR20 ((uint32_t)0x00100000) /*!< Falling trigger event configuration bit of line 20 */
+#define EXTI_FTSR_TR21 ((uint32_t)0x00200000) /*!< Falling trigger event configuration bit of line 21 */
+#define EXTI_FTSR_TR22 ((uint32_t)0x00400000) /*!< Falling trigger event configuration bit of line 22 */
+
+/******************* Bit definition for EXTI_SWIER register *******************/
+#define EXTI_SWIER_SWIER0 ((uint32_t)0x00000001) /*!< Software Interrupt on line 0 */
+#define EXTI_SWIER_SWIER1 ((uint32_t)0x00000002) /*!< Software Interrupt on line 1 */
+#define EXTI_SWIER_SWIER2 ((uint32_t)0x00000004) /*!< Software Interrupt on line 2 */
+#define EXTI_SWIER_SWIER3 ((uint32_t)0x00000008) /*!< Software Interrupt on line 3 */
+#define EXTI_SWIER_SWIER4 ((uint32_t)0x00000010) /*!< Software Interrupt on line 4 */
+#define EXTI_SWIER_SWIER5 ((uint32_t)0x00000020) /*!< Software Interrupt on line 5 */
+#define EXTI_SWIER_SWIER6 ((uint32_t)0x00000040) /*!< Software Interrupt on line 6 */
+#define EXTI_SWIER_SWIER7 ((uint32_t)0x00000080) /*!< Software Interrupt on line 7 */
+#define EXTI_SWIER_SWIER8 ((uint32_t)0x00000100) /*!< Software Interrupt on line 8 */
+#define EXTI_SWIER_SWIER9 ((uint32_t)0x00000200) /*!< Software Interrupt on line 9 */
+#define EXTI_SWIER_SWIER10 ((uint32_t)0x00000400) /*!< Software Interrupt on line 10 */
+#define EXTI_SWIER_SWIER11 ((uint32_t)0x00000800) /*!< Software Interrupt on line 11 */
+#define EXTI_SWIER_SWIER12 ((uint32_t)0x00001000) /*!< Software Interrupt on line 12 */
+#define EXTI_SWIER_SWIER13 ((uint32_t)0x00002000) /*!< Software Interrupt on line 13 */
+#define EXTI_SWIER_SWIER14 ((uint32_t)0x00004000) /*!< Software Interrupt on line 14 */
+#define EXTI_SWIER_SWIER15 ((uint32_t)0x00008000) /*!< Software Interrupt on line 15 */
+#define EXTI_SWIER_SWIER16 ((uint32_t)0x00010000) /*!< Software Interrupt on line 16 */
+#define EXTI_SWIER_SWIER17 ((uint32_t)0x00020000) /*!< Software Interrupt on line 17 */
+#define EXTI_SWIER_SWIER19 ((uint32_t)0x00080000) /*!< Software Interrupt on line 19 */
+#define EXTI_SWIER_SWIER20 ((uint32_t)0x00100000) /*!< Software Interrupt on line 20 */
+#define EXTI_SWIER_SWIER21 ((uint32_t)0x00200000) /*!< Software Interrupt on line 21 */
+#define EXTI_SWIER_SWIER22 ((uint32_t)0x00400000) /*!< Software Interrupt on line 22 */
+
+/****************** Bit definition for EXTI_PR register *********************/
+#define EXTI_PR_PR0 ((uint32_t)0x00000001) /*!< Pending bit 0 */
+#define EXTI_PR_PR1 ((uint32_t)0x00000002) /*!< Pending bit 1 */
+#define EXTI_PR_PR2 ((uint32_t)0x00000004) /*!< Pending bit 2 */
+#define EXTI_PR_PR3 ((uint32_t)0x00000008) /*!< Pending bit 3 */
+#define EXTI_PR_PR4 ((uint32_t)0x00000010) /*!< Pending bit 4 */
+#define EXTI_PR_PR5 ((uint32_t)0x00000020) /*!< Pending bit 5 */
+#define EXTI_PR_PR6 ((uint32_t)0x00000040) /*!< Pending bit 6 */
+#define EXTI_PR_PR7 ((uint32_t)0x00000080) /*!< Pending bit 7 */
+#define EXTI_PR_PR8 ((uint32_t)0x00000100) /*!< Pending bit 8 */
+#define EXTI_PR_PR9 ((uint32_t)0x00000200) /*!< Pending bit 9 */
+#define EXTI_PR_PR10 ((uint32_t)0x00000400) /*!< Pending bit 10 */
+#define EXTI_PR_PR11 ((uint32_t)0x00000800) /*!< Pending bit 11 */
+#define EXTI_PR_PR12 ((uint32_t)0x00001000) /*!< Pending bit 12 */
+#define EXTI_PR_PR13 ((uint32_t)0x00002000) /*!< Pending bit 13 */
+#define EXTI_PR_PR14 ((uint32_t)0x00004000) /*!< Pending bit 14 */
+#define EXTI_PR_PR15 ((uint32_t)0x00008000) /*!< Pending bit 15 */
+#define EXTI_PR_PR16 ((uint32_t)0x00010000) /*!< Pending bit 16 */
+#define EXTI_PR_PR17 ((uint32_t)0x00020000) /*!< Pending bit 17 */
+#define EXTI_PR_PR19 ((uint32_t)0x00080000) /*!< Pending bit 19 */
+#define EXTI_PR_PR20 ((uint32_t)0x00100000) /*!< Pending bit 20 */
+#define EXTI_PR_PR21 ((uint32_t)0x00200000) /*!< Pending bit 21 */
+#define EXTI_PR_PR22 ((uint32_t)0x00400000) /*!< Pending bit 22 */
+
+/******************************************************************************/
+/* */
+/* FLASH and Option Bytes Registers */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for FLASH_ACR register ******************/
+#define FLASH_ACR_LATENCY ((uint32_t)0x00000001) /*!< LATENCY bit (Latency) */
+
+#define FLASH_ACR_PRFTBE ((uint32_t)0x00000010) /*!< Prefetch Buffer Enable */
+#define FLASH_ACR_PRFTBS ((uint32_t)0x00000020) /*!< Prefetch Buffer Status */
+
+/****************** Bit definition for FLASH_KEYR register ******************/
+#define FLASH_KEYR_FKEYR ((uint32_t)0xFFFFFFFF) /*!< FPEC Key */
+
+/***************** Bit definition for FLASH_OPTKEYR register ****************/
+#define FLASH_OPTKEYR_OPTKEYR ((uint32_t)0xFFFFFFFF) /*!< Option Byte Key */
+
+/****************** FLASH Keys **********************************************/
+#define FLASH_FKEY1 ((uint32_t)0x45670123) /*!< Flash program erase key1 */
+#define FLASH_FKEY2 ((uint32_t)0xCDEF89AB) /*!< Flash program erase key2: used with FLASH_PEKEY1
+ to unlock the write access to the FPEC. */
+
+#define FLASH_OPTKEY1 ((uint32_t)0x45670123) /*!< Flash option key1 */
+#define FLASH_OPTKEY2 ((uint32_t)0xCDEF89AB) /*!< Flash option key2: used with FLASH_OPTKEY1 to
+ unlock the write access to the option byte block */
+
+/****************** Bit definition for FLASH_SR register *******************/
+#define FLASH_SR_BSY ((uint32_t)0x00000001) /*!< Busy */
+#define FLASH_SR_PGERR ((uint32_t)0x00000004) /*!< Programming Error */
+#define FLASH_SR_WRPRTERR ((uint32_t)0x00000010) /*!< Write Protection Error */
+#define FLASH_SR_EOP ((uint32_t)0x00000020) /*!< End of operation */
+#define FLASH_SR_WRPERR FLASH_SR_WRPRTERR /*!< Legacy of Write Protection Error */
+
+/******************* Bit definition for FLASH_CR register *******************/
+#define FLASH_CR_PG ((uint32_t)0x00000001) /*!< Programming */
+#define FLASH_CR_PER ((uint32_t)0x00000002) /*!< Page Erase */
+#define FLASH_CR_MER ((uint32_t)0x00000004) /*!< Mass Erase */
+#define FLASH_CR_OPTPG ((uint32_t)0x00000010) /*!< Option Byte Programming */
+#define FLASH_CR_OPTER ((uint32_t)0x00000020) /*!< Option Byte Erase */
+#define FLASH_CR_STRT ((uint32_t)0x00000040) /*!< Start */
+#define FLASH_CR_LOCK ((uint32_t)0x00000080) /*!< Lock */
+#define FLASH_CR_OPTWRE ((uint32_t)0x00000200) /*!< Option Bytes Write Enable */
+#define FLASH_CR_ERRIE ((uint32_t)0x00000400) /*!< Error Interrupt Enable */
+#define FLASH_CR_EOPIE ((uint32_t)0x00001000) /*!< End of operation interrupt enable */
+#define FLASH_CR_OBL_LAUNCH ((uint32_t)0x00002000) /*!< Option Bytes Loader Launch */
+
+/******************* Bit definition for FLASH_AR register *******************/
+#define FLASH_AR_FAR ((uint32_t)0xFFFFFFFF) /*!< Flash Address */
+
+/****************** Bit definition for FLASH_OBR register *******************/
+#define FLASH_OBR_OPTERR ((uint32_t)0x00000001) /*!< Option Byte Error */
+#define FLASH_OBR_RDPRT1 ((uint32_t)0x00000002) /*!< Read protection Level 1 */
+#define FLASH_OBR_RDPRT2 ((uint32_t)0x00000004) /*!< Read protection Level 2 */
+
+#define FLASH_OBR_USER ((uint32_t)0x00003700) /*!< User Option Bytes */
+#define FLASH_OBR_IWDG_SW ((uint32_t)0x00000100) /*!< IWDG SW */
+#define FLASH_OBR_nRST_STOP ((uint32_t)0x00000200) /*!< nRST_STOP */
+#define FLASH_OBR_nRST_STDBY ((uint32_t)0x00000400) /*!< nRST_STDBY */
+#define FLASH_OBR_nBOOT1 ((uint32_t)0x00001000) /*!< nBOOT1 */
+#define FLASH_OBR_VDDA_MONITOR ((uint32_t)0x00002000) /*!< VDDA power supply supervisor */
+
+/* Old BOOT1 bit definition, maintained for legacy purpose */
+#define FLASH_OBR_BOOT1 FLASH_OBR_nBOOT1
+
+/* Old OBR_VDDA bit definition, maintained for legacy purpose */
+#define FLASH_OBR_VDDA_ANALOG FLASH_OBR_VDDA_MONITOR
+
+/****************** Bit definition for FLASH_WRPR register ******************/
+#define FLASH_WRPR_WRP ((uint32_t)0x0000FFFF) /*!< Write Protect */
+
+/*----------------------------------------------------------------------------*/
+
+/****************** Bit definition for OB_RDP register **********************/
+#define OB_RDP_RDP ((uint32_t)0x000000FF) /*!< Read protection option byte */
+#define OB_RDP_nRDP ((uint32_t)0x0000FF00) /*!< Read protection complemented option byte */
+
+/****************** Bit definition for OB_USER register *********************/
+#define OB_USER_USER ((uint32_t)0x00FF0000) /*!< User option byte */
+#define OB_USER_nUSER ((uint32_t)0xFF000000) /*!< User complemented option byte */
+
+/****************** Bit definition for OB_WRP0 register *********************/
+#define OB_WRP0_WRP0 ((uint32_t)0x000000FF) /*!< Flash memory write protection option bytes */
+#define OB_WRP0_nWRP0 ((uint32_t)0x0000FF00) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for OB_WRP1 register *********************/
+#define OB_WRP1_WRP1 ((uint32_t)0x00FF0000) /*!< Flash memory write protection option bytes */
+#define OB_WRP1_nWRP1 ((uint32_t)0xFF000000) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for OB_WRP2 register *********************/
+#define OB_WRP2_WRP2 ((uint32_t)0x000000FF) /*!< Flash memory write protection option bytes */
+#define OB_WRP2_nWRP2 ((uint32_t)0x0000FF00) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for OB_WRP3 register *********************/
+#define OB_WRP3_WRP3 ((uint32_t)0x00FF0000) /*!< Flash memory write protection option bytes */
+#define OB_WRP3_nWRP3 ((uint32_t)0xFF000000) /*!< Flash memory write protection complemented option bytes */
+
+/******************************************************************************/
+/* */
+/* General Purpose IOs (GPIO) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for GPIO_MODER register *****************/
+#define GPIO_MODER_MODER0 ((uint32_t)0x00000003)
+#define GPIO_MODER_MODER0_0 ((uint32_t)0x00000001)
+#define GPIO_MODER_MODER0_1 ((uint32_t)0x00000002)
+#define GPIO_MODER_MODER1 ((uint32_t)0x0000000C)
+#define GPIO_MODER_MODER1_0 ((uint32_t)0x00000004)
+#define GPIO_MODER_MODER1_1 ((uint32_t)0x00000008)
+#define GPIO_MODER_MODER2 ((uint32_t)0x00000030)
+#define GPIO_MODER_MODER2_0 ((uint32_t)0x00000010)
+#define GPIO_MODER_MODER2_1 ((uint32_t)0x00000020)
+#define GPIO_MODER_MODER3 ((uint32_t)0x000000C0)
+#define GPIO_MODER_MODER3_0 ((uint32_t)0x00000040)
+#define GPIO_MODER_MODER3_1 ((uint32_t)0x00000080)
+#define GPIO_MODER_MODER4 ((uint32_t)0x00000300)
+#define GPIO_MODER_MODER4_0 ((uint32_t)0x00000100)
+#define GPIO_MODER_MODER4_1 ((uint32_t)0x00000200)
+#define GPIO_MODER_MODER5 ((uint32_t)0x00000C00)
+#define GPIO_MODER_MODER5_0 ((uint32_t)0x00000400)
+#define GPIO_MODER_MODER5_1 ((uint32_t)0x00000800)
+#define GPIO_MODER_MODER6 ((uint32_t)0x00003000)
+#define GPIO_MODER_MODER6_0 ((uint32_t)0x00001000)
+#define GPIO_MODER_MODER6_1 ((uint32_t)0x00002000)
+#define GPIO_MODER_MODER7 ((uint32_t)0x0000C000)
+#define GPIO_MODER_MODER7_0 ((uint32_t)0x00004000)
+#define GPIO_MODER_MODER7_1 ((uint32_t)0x00008000)
+#define GPIO_MODER_MODER8 ((uint32_t)0x00030000)
+#define GPIO_MODER_MODER8_0 ((uint32_t)0x00010000)
+#define GPIO_MODER_MODER8_1 ((uint32_t)0x00020000)
+#define GPIO_MODER_MODER9 ((uint32_t)0x000C0000)
+#define GPIO_MODER_MODER9_0 ((uint32_t)0x00040000)
+#define GPIO_MODER_MODER9_1 ((uint32_t)0x00080000)
+#define GPIO_MODER_MODER10 ((uint32_t)0x00300000)
+#define GPIO_MODER_MODER10_0 ((uint32_t)0x00100000)
+#define GPIO_MODER_MODER10_1 ((uint32_t)0x00200000)
+#define GPIO_MODER_MODER11 ((uint32_t)0x00C00000)
+#define GPIO_MODER_MODER11_0 ((uint32_t)0x00400000)
+#define GPIO_MODER_MODER11_1 ((uint32_t)0x00800000)
+#define GPIO_MODER_MODER12 ((uint32_t)0x03000000)
+#define GPIO_MODER_MODER12_0 ((uint32_t)0x01000000)
+#define GPIO_MODER_MODER12_1 ((uint32_t)0x02000000)
+#define GPIO_MODER_MODER13 ((uint32_t)0x0C000000)
+#define GPIO_MODER_MODER13_0 ((uint32_t)0x04000000)
+#define GPIO_MODER_MODER13_1 ((uint32_t)0x08000000)
+#define GPIO_MODER_MODER14 ((uint32_t)0x30000000)
+#define GPIO_MODER_MODER14_0 ((uint32_t)0x10000000)
+#define GPIO_MODER_MODER14_1 ((uint32_t)0x20000000)
+#define GPIO_MODER_MODER15 ((uint32_t)0xC0000000)
+#define GPIO_MODER_MODER15_0 ((uint32_t)0x40000000)
+#define GPIO_MODER_MODER15_1 ((uint32_t)0x80000000)
+
+/****************** Bit definition for GPIO_OTYPER register *****************/
+#define GPIO_OTYPER_OT_0 ((uint32_t)0x00000001)
+#define GPIO_OTYPER_OT_1 ((uint32_t)0x00000002)
+#define GPIO_OTYPER_OT_2 ((uint32_t)0x00000004)
+#define GPIO_OTYPER_OT_3 ((uint32_t)0x00000008)
+#define GPIO_OTYPER_OT_4 ((uint32_t)0x00000010)
+#define GPIO_OTYPER_OT_5 ((uint32_t)0x00000020)
+#define GPIO_OTYPER_OT_6 ((uint32_t)0x00000040)
+#define GPIO_OTYPER_OT_7 ((uint32_t)0x00000080)
+#define GPIO_OTYPER_OT_8 ((uint32_t)0x00000100)
+#define GPIO_OTYPER_OT_9 ((uint32_t)0x00000200)
+#define GPIO_OTYPER_OT_10 ((uint32_t)0x00000400)
+#define GPIO_OTYPER_OT_11 ((uint32_t)0x00000800)
+#define GPIO_OTYPER_OT_12 ((uint32_t)0x00001000)
+#define GPIO_OTYPER_OT_13 ((uint32_t)0x00002000)
+#define GPIO_OTYPER_OT_14 ((uint32_t)0x00004000)
+#define GPIO_OTYPER_OT_15 ((uint32_t)0x00008000)
+
+/**************** Bit definition for GPIO_OSPEEDR register ******************/
+#define GPIO_OSPEEDR_OSPEEDR0 ((uint32_t)0x00000003)
+#define GPIO_OSPEEDR_OSPEEDR0_0 ((uint32_t)0x00000001)
+#define GPIO_OSPEEDR_OSPEEDR0_1 ((uint32_t)0x00000002)
+#define GPIO_OSPEEDR_OSPEEDR1 ((uint32_t)0x0000000C)
+#define GPIO_OSPEEDR_OSPEEDR1_0 ((uint32_t)0x00000004)
+#define GPIO_OSPEEDR_OSPEEDR1_1 ((uint32_t)0x00000008)
+#define GPIO_OSPEEDR_OSPEEDR2 ((uint32_t)0x00000030)
+#define GPIO_OSPEEDR_OSPEEDR2_0 ((uint32_t)0x00000010)
+#define GPIO_OSPEEDR_OSPEEDR2_1 ((uint32_t)0x00000020)
+#define GPIO_OSPEEDR_OSPEEDR3 ((uint32_t)0x000000C0)
+#define GPIO_OSPEEDR_OSPEEDR3_0 ((uint32_t)0x00000040)
+#define GPIO_OSPEEDR_OSPEEDR3_1 ((uint32_t)0x00000080)
+#define GPIO_OSPEEDR_OSPEEDR4 ((uint32_t)0x00000300)
+#define GPIO_OSPEEDR_OSPEEDR4_0 ((uint32_t)0x00000100)
+#define GPIO_OSPEEDR_OSPEEDR4_1 ((uint32_t)0x00000200)
+#define GPIO_OSPEEDR_OSPEEDR5 ((uint32_t)0x00000C00)
+#define GPIO_OSPEEDR_OSPEEDR5_0 ((uint32_t)0x00000400)
+#define GPIO_OSPEEDR_OSPEEDR5_1 ((uint32_t)0x00000800)
+#define GPIO_OSPEEDR_OSPEEDR6 ((uint32_t)0x00003000)
+#define GPIO_OSPEEDR_OSPEEDR6_0 ((uint32_t)0x00001000)
+#define GPIO_OSPEEDR_OSPEEDR6_1 ((uint32_t)0x00002000)
+#define GPIO_OSPEEDR_OSPEEDR7 ((uint32_t)0x0000C000)
+#define GPIO_OSPEEDR_OSPEEDR7_0 ((uint32_t)0x00004000)
+#define GPIO_OSPEEDR_OSPEEDR7_1 ((uint32_t)0x00008000)
+#define GPIO_OSPEEDR_OSPEEDR8 ((uint32_t)0x00030000)
+#define GPIO_OSPEEDR_OSPEEDR8_0 ((uint32_t)0x00010000)
+#define GPIO_OSPEEDR_OSPEEDR8_1 ((uint32_t)0x00020000)
+#define GPIO_OSPEEDR_OSPEEDR9 ((uint32_t)0x000C0000)
+#define GPIO_OSPEEDR_OSPEEDR9_0 ((uint32_t)0x00040000)
+#define GPIO_OSPEEDR_OSPEEDR9_1 ((uint32_t)0x00080000)
+#define GPIO_OSPEEDR_OSPEEDR10 ((uint32_t)0x00300000)
+#define GPIO_OSPEEDR_OSPEEDR10_0 ((uint32_t)0x00100000)
+#define GPIO_OSPEEDR_OSPEEDR10_1 ((uint32_t)0x00200000)
+#define GPIO_OSPEEDR_OSPEEDR11 ((uint32_t)0x00C00000)
+#define GPIO_OSPEEDR_OSPEEDR11_0 ((uint32_t)0x00400000)
+#define GPIO_OSPEEDR_OSPEEDR11_1 ((uint32_t)0x00800000)
+#define GPIO_OSPEEDR_OSPEEDR12 ((uint32_t)0x03000000)
+#define GPIO_OSPEEDR_OSPEEDR12_0 ((uint32_t)0x01000000)
+#define GPIO_OSPEEDR_OSPEEDR12_1 ((uint32_t)0x02000000)
+#define GPIO_OSPEEDR_OSPEEDR13 ((uint32_t)0x0C000000)
+#define GPIO_OSPEEDR_OSPEEDR13_0 ((uint32_t)0x04000000)
+#define GPIO_OSPEEDR_OSPEEDR13_1 ((uint32_t)0x08000000)
+#define GPIO_OSPEEDR_OSPEEDR14 ((uint32_t)0x30000000)
+#define GPIO_OSPEEDR_OSPEEDR14_0 ((uint32_t)0x10000000)
+#define GPIO_OSPEEDR_OSPEEDR14_1 ((uint32_t)0x20000000)
+#define GPIO_OSPEEDR_OSPEEDR15 ((uint32_t)0xC0000000)
+#define GPIO_OSPEEDR_OSPEEDR15_0 ((uint32_t)0x40000000)
+#define GPIO_OSPEEDR_OSPEEDR15_1 ((uint32_t)0x80000000)
+
+/* Old Bit definition for GPIO_OSPEEDR register maintained for legacy purpose */
+#define GPIO_OSPEEDER_OSPEEDR0 GPIO_OSPEEDR_OSPEEDR0
+#define GPIO_OSPEEDER_OSPEEDR0_0 GPIO_OSPEEDR_OSPEEDR0_0
+#define GPIO_OSPEEDER_OSPEEDR0_1 GPIO_OSPEEDR_OSPEEDR0_1
+#define GPIO_OSPEEDER_OSPEEDR1 GPIO_OSPEEDR_OSPEEDR1
+#define GPIO_OSPEEDER_OSPEEDR1_0 GPIO_OSPEEDR_OSPEEDR1_0
+#define GPIO_OSPEEDER_OSPEEDR1_1 GPIO_OSPEEDR_OSPEEDR1_1
+#define GPIO_OSPEEDER_OSPEEDR2 GPIO_OSPEEDR_OSPEEDR2
+#define GPIO_OSPEEDER_OSPEEDR2_0 GPIO_OSPEEDR_OSPEEDR2_0
+#define GPIO_OSPEEDER_OSPEEDR2_1 GPIO_OSPEEDR_OSPEEDR2_1
+#define GPIO_OSPEEDER_OSPEEDR3 GPIO_OSPEEDR_OSPEEDR3
+#define GPIO_OSPEEDER_OSPEEDR3_0 GPIO_OSPEEDR_OSPEEDR3_0
+#define GPIO_OSPEEDER_OSPEEDR3_1 GPIO_OSPEEDR_OSPEEDR3_1
+#define GPIO_OSPEEDER_OSPEEDR4 GPIO_OSPEEDR_OSPEEDR4
+#define GPIO_OSPEEDER_OSPEEDR4_0 GPIO_OSPEEDR_OSPEEDR4_0
+#define GPIO_OSPEEDER_OSPEEDR4_1 GPIO_OSPEEDR_OSPEEDR4_1
+#define GPIO_OSPEEDER_OSPEEDR5 GPIO_OSPEEDR_OSPEEDR5
+#define GPIO_OSPEEDER_OSPEEDR5_0 GPIO_OSPEEDR_OSPEEDR5_0
+#define GPIO_OSPEEDER_OSPEEDR5_1 GPIO_OSPEEDR_OSPEEDR5_1
+#define GPIO_OSPEEDER_OSPEEDR6 GPIO_OSPEEDR_OSPEEDR6
+#define GPIO_OSPEEDER_OSPEEDR6_0 GPIO_OSPEEDR_OSPEEDR6_0
+#define GPIO_OSPEEDER_OSPEEDR6_1 GPIO_OSPEEDR_OSPEEDR6_1
+#define GPIO_OSPEEDER_OSPEEDR7 GPIO_OSPEEDR_OSPEEDR7
+#define GPIO_OSPEEDER_OSPEEDR7_0 GPIO_OSPEEDR_OSPEEDR7_0
+#define GPIO_OSPEEDER_OSPEEDR7_1 GPIO_OSPEEDR_OSPEEDR7_1
+#define GPIO_OSPEEDER_OSPEEDR8 GPIO_OSPEEDR_OSPEEDR8
+#define GPIO_OSPEEDER_OSPEEDR8_0 GPIO_OSPEEDR_OSPEEDR8_0
+#define GPIO_OSPEEDER_OSPEEDR8_1 GPIO_OSPEEDR_OSPEEDR8_1
+#define GPIO_OSPEEDER_OSPEEDR9 GPIO_OSPEEDR_OSPEEDR9
+#define GPIO_OSPEEDER_OSPEEDR9_0 GPIO_OSPEEDR_OSPEEDR9_0
+#define GPIO_OSPEEDER_OSPEEDR9_1 GPIO_OSPEEDR_OSPEEDR9_1
+#define GPIO_OSPEEDER_OSPEEDR10 GPIO_OSPEEDR_OSPEEDR10
+#define GPIO_OSPEEDER_OSPEEDR10_0 GPIO_OSPEEDR_OSPEEDR10_0
+#define GPIO_OSPEEDER_OSPEEDR10_1 GPIO_OSPEEDR_OSPEEDR10_1
+#define GPIO_OSPEEDER_OSPEEDR11 GPIO_OSPEEDR_OSPEEDR11
+#define GPIO_OSPEEDER_OSPEEDR11_0 GPIO_OSPEEDR_OSPEEDR11_0
+#define GPIO_OSPEEDER_OSPEEDR11_1 GPIO_OSPEEDR_OSPEEDR11_1
+#define GPIO_OSPEEDER_OSPEEDR12 GPIO_OSPEEDR_OSPEEDR12
+#define GPIO_OSPEEDER_OSPEEDR12_0 GPIO_OSPEEDR_OSPEEDR12_0
+#define GPIO_OSPEEDER_OSPEEDR12_1 GPIO_OSPEEDR_OSPEEDR12_1
+#define GPIO_OSPEEDER_OSPEEDR13 GPIO_OSPEEDR_OSPEEDR13
+#define GPIO_OSPEEDER_OSPEEDR13_0 GPIO_OSPEEDR_OSPEEDR13_0
+#define GPIO_OSPEEDER_OSPEEDR13_1 GPIO_OSPEEDR_OSPEEDR13_1
+#define GPIO_OSPEEDER_OSPEEDR14 GPIO_OSPEEDR_OSPEEDR14
+#define GPIO_OSPEEDER_OSPEEDR14_0 GPIO_OSPEEDR_OSPEEDR14_0
+#define GPIO_OSPEEDER_OSPEEDR14_1 GPIO_OSPEEDR_OSPEEDR14_1
+#define GPIO_OSPEEDER_OSPEEDR15 GPIO_OSPEEDR_OSPEEDR15
+#define GPIO_OSPEEDER_OSPEEDR15_0 GPIO_OSPEEDR_OSPEEDR15_0
+#define GPIO_OSPEEDER_OSPEEDR15_1 GPIO_OSPEEDR_OSPEEDR15_1
+
+/******************* Bit definition for GPIO_PUPDR register ******************/
+#define GPIO_PUPDR_PUPDR0 ((uint32_t)0x00000003)
+#define GPIO_PUPDR_PUPDR0_0 ((uint32_t)0x00000001)
+#define GPIO_PUPDR_PUPDR0_1 ((uint32_t)0x00000002)
+#define GPIO_PUPDR_PUPDR1 ((uint32_t)0x0000000C)
+#define GPIO_PUPDR_PUPDR1_0 ((uint32_t)0x00000004)
+#define GPIO_PUPDR_PUPDR1_1 ((uint32_t)0x00000008)
+#define GPIO_PUPDR_PUPDR2 ((uint32_t)0x00000030)
+#define GPIO_PUPDR_PUPDR2_0 ((uint32_t)0x00000010)
+#define GPIO_PUPDR_PUPDR2_1 ((uint32_t)0x00000020)
+#define GPIO_PUPDR_PUPDR3 ((uint32_t)0x000000C0)
+#define GPIO_PUPDR_PUPDR3_0 ((uint32_t)0x00000040)
+#define GPIO_PUPDR_PUPDR3_1 ((uint32_t)0x00000080)
+#define GPIO_PUPDR_PUPDR4 ((uint32_t)0x00000300)
+#define GPIO_PUPDR_PUPDR4_0 ((uint32_t)0x00000100)
+#define GPIO_PUPDR_PUPDR4_1 ((uint32_t)0x00000200)
+#define GPIO_PUPDR_PUPDR5 ((uint32_t)0x00000C00)
+#define GPIO_PUPDR_PUPDR5_0 ((uint32_t)0x00000400)
+#define GPIO_PUPDR_PUPDR5_1 ((uint32_t)0x00000800)
+#define GPIO_PUPDR_PUPDR6 ((uint32_t)0x00003000)
+#define GPIO_PUPDR_PUPDR6_0 ((uint32_t)0x00001000)
+#define GPIO_PUPDR_PUPDR6_1 ((uint32_t)0x00002000)
+#define GPIO_PUPDR_PUPDR7 ((uint32_t)0x0000C000)
+#define GPIO_PUPDR_PUPDR7_0 ((uint32_t)0x00004000)
+#define GPIO_PUPDR_PUPDR7_1 ((uint32_t)0x00008000)
+#define GPIO_PUPDR_PUPDR8 ((uint32_t)0x00030000)
+#define GPIO_PUPDR_PUPDR8_0 ((uint32_t)0x00010000)
+#define GPIO_PUPDR_PUPDR8_1 ((uint32_t)0x00020000)
+#define GPIO_PUPDR_PUPDR9 ((uint32_t)0x000C0000)
+#define GPIO_PUPDR_PUPDR9_0 ((uint32_t)0x00040000)
+#define GPIO_PUPDR_PUPDR9_1 ((uint32_t)0x00080000)
+#define GPIO_PUPDR_PUPDR10 ((uint32_t)0x00300000)
+#define GPIO_PUPDR_PUPDR10_0 ((uint32_t)0x00100000)
+#define GPIO_PUPDR_PUPDR10_1 ((uint32_t)0x00200000)
+#define GPIO_PUPDR_PUPDR11 ((uint32_t)0x00C00000)
+#define GPIO_PUPDR_PUPDR11_0 ((uint32_t)0x00400000)
+#define GPIO_PUPDR_PUPDR11_1 ((uint32_t)0x00800000)
+#define GPIO_PUPDR_PUPDR12 ((uint32_t)0x03000000)
+#define GPIO_PUPDR_PUPDR12_0 ((uint32_t)0x01000000)
+#define GPIO_PUPDR_PUPDR12_1 ((uint32_t)0x02000000)
+#define GPIO_PUPDR_PUPDR13 ((uint32_t)0x0C000000)
+#define GPIO_PUPDR_PUPDR13_0 ((uint32_t)0x04000000)
+#define GPIO_PUPDR_PUPDR13_1 ((uint32_t)0x08000000)
+#define GPIO_PUPDR_PUPDR14 ((uint32_t)0x30000000)
+#define GPIO_PUPDR_PUPDR14_0 ((uint32_t)0x10000000)
+#define GPIO_PUPDR_PUPDR14_1 ((uint32_t)0x20000000)
+#define GPIO_PUPDR_PUPDR15 ((uint32_t)0xC0000000)
+#define GPIO_PUPDR_PUPDR15_0 ((uint32_t)0x40000000)
+#define GPIO_PUPDR_PUPDR15_1 ((uint32_t)0x80000000)
+
+/******************* Bit definition for GPIO_IDR register *******************/
+#define GPIO_IDR_0 ((uint32_t)0x00000001)
+#define GPIO_IDR_1 ((uint32_t)0x00000002)
+#define GPIO_IDR_2 ((uint32_t)0x00000004)
+#define GPIO_IDR_3 ((uint32_t)0x00000008)
+#define GPIO_IDR_4 ((uint32_t)0x00000010)
+#define GPIO_IDR_5 ((uint32_t)0x00000020)
+#define GPIO_IDR_6 ((uint32_t)0x00000040)
+#define GPIO_IDR_7 ((uint32_t)0x00000080)
+#define GPIO_IDR_8 ((uint32_t)0x00000100)
+#define GPIO_IDR_9 ((uint32_t)0x00000200)
+#define GPIO_IDR_10 ((uint32_t)0x00000400)
+#define GPIO_IDR_11 ((uint32_t)0x00000800)
+#define GPIO_IDR_12 ((uint32_t)0x00001000)
+#define GPIO_IDR_13 ((uint32_t)0x00002000)
+#define GPIO_IDR_14 ((uint32_t)0x00004000)
+#define GPIO_IDR_15 ((uint32_t)0x00008000)
+
+/****************** Bit definition for GPIO_ODR register ********************/
+#define GPIO_ODR_0 ((uint32_t)0x00000001)
+#define GPIO_ODR_1 ((uint32_t)0x00000002)
+#define GPIO_ODR_2 ((uint32_t)0x00000004)
+#define GPIO_ODR_3 ((uint32_t)0x00000008)
+#define GPIO_ODR_4 ((uint32_t)0x00000010)
+#define GPIO_ODR_5 ((uint32_t)0x00000020)
+#define GPIO_ODR_6 ((uint32_t)0x00000040)
+#define GPIO_ODR_7 ((uint32_t)0x00000080)
+#define GPIO_ODR_8 ((uint32_t)0x00000100)
+#define GPIO_ODR_9 ((uint32_t)0x00000200)
+#define GPIO_ODR_10 ((uint32_t)0x00000400)
+#define GPIO_ODR_11 ((uint32_t)0x00000800)
+#define GPIO_ODR_12 ((uint32_t)0x00001000)
+#define GPIO_ODR_13 ((uint32_t)0x00002000)
+#define GPIO_ODR_14 ((uint32_t)0x00004000)
+#define GPIO_ODR_15 ((uint32_t)0x00008000)
+
+/****************** Bit definition for GPIO_BSRR register ********************/
+#define GPIO_BSRR_BS_0 ((uint32_t)0x00000001)
+#define GPIO_BSRR_BS_1 ((uint32_t)0x00000002)
+#define GPIO_BSRR_BS_2 ((uint32_t)0x00000004)
+#define GPIO_BSRR_BS_3 ((uint32_t)0x00000008)
+#define GPIO_BSRR_BS_4 ((uint32_t)0x00000010)
+#define GPIO_BSRR_BS_5 ((uint32_t)0x00000020)
+#define GPIO_BSRR_BS_6 ((uint32_t)0x00000040)
+#define GPIO_BSRR_BS_7 ((uint32_t)0x00000080)
+#define GPIO_BSRR_BS_8 ((uint32_t)0x00000100)
+#define GPIO_BSRR_BS_9 ((uint32_t)0x00000200)
+#define GPIO_BSRR_BS_10 ((uint32_t)0x00000400)
+#define GPIO_BSRR_BS_11 ((uint32_t)0x00000800)
+#define GPIO_BSRR_BS_12 ((uint32_t)0x00001000)
+#define GPIO_BSRR_BS_13 ((uint32_t)0x00002000)
+#define GPIO_BSRR_BS_14 ((uint32_t)0x00004000)
+#define GPIO_BSRR_BS_15 ((uint32_t)0x00008000)
+#define GPIO_BSRR_BR_0 ((uint32_t)0x00010000)
+#define GPIO_BSRR_BR_1 ((uint32_t)0x00020000)
+#define GPIO_BSRR_BR_2 ((uint32_t)0x00040000)
+#define GPIO_BSRR_BR_3 ((uint32_t)0x00080000)
+#define GPIO_BSRR_BR_4 ((uint32_t)0x00100000)
+#define GPIO_BSRR_BR_5 ((uint32_t)0x00200000)
+#define GPIO_BSRR_BR_6 ((uint32_t)0x00400000)
+#define GPIO_BSRR_BR_7 ((uint32_t)0x00800000)
+#define GPIO_BSRR_BR_8 ((uint32_t)0x01000000)
+#define GPIO_BSRR_BR_9 ((uint32_t)0x02000000)
+#define GPIO_BSRR_BR_10 ((uint32_t)0x04000000)
+#define GPIO_BSRR_BR_11 ((uint32_t)0x08000000)
+#define GPIO_BSRR_BR_12 ((uint32_t)0x10000000)
+#define GPIO_BSRR_BR_13 ((uint32_t)0x20000000)
+#define GPIO_BSRR_BR_14 ((uint32_t)0x40000000)
+#define GPIO_BSRR_BR_15 ((uint32_t)0x80000000)
+
+/****************** Bit definition for GPIO_LCKR register ********************/
+#define GPIO_LCKR_LCK0 ((uint32_t)0x00000001)
+#define GPIO_LCKR_LCK1 ((uint32_t)0x00000002)
+#define GPIO_LCKR_LCK2 ((uint32_t)0x00000004)
+#define GPIO_LCKR_LCK3 ((uint32_t)0x00000008)
+#define GPIO_LCKR_LCK4 ((uint32_t)0x00000010)
+#define GPIO_LCKR_LCK5 ((uint32_t)0x00000020)
+#define GPIO_LCKR_LCK6 ((uint32_t)0x00000040)
+#define GPIO_LCKR_LCK7 ((uint32_t)0x00000080)
+#define GPIO_LCKR_LCK8 ((uint32_t)0x00000100)
+#define GPIO_LCKR_LCK9 ((uint32_t)0x00000200)
+#define GPIO_LCKR_LCK10 ((uint32_t)0x00000400)
+#define GPIO_LCKR_LCK11 ((uint32_t)0x00000800)
+#define GPIO_LCKR_LCK12 ((uint32_t)0x00001000)
+#define GPIO_LCKR_LCK13 ((uint32_t)0x00002000)
+#define GPIO_LCKR_LCK14 ((uint32_t)0x00004000)
+#define GPIO_LCKR_LCK15 ((uint32_t)0x00008000)
+#define GPIO_LCKR_LCKK ((uint32_t)0x00010000)
+
+/****************** Bit definition for GPIO_AFRL register ********************/
+#define GPIO_AFRL_AFRL0 ((uint32_t)0x0000000F)
+#define GPIO_AFRL_AFRL1 ((uint32_t)0x000000F0)
+#define GPIO_AFRL_AFRL2 ((uint32_t)0x00000F00)
+#define GPIO_AFRL_AFRL3 ((uint32_t)0x0000F000)
+#define GPIO_AFRL_AFRL4 ((uint32_t)0x000F0000)
+#define GPIO_AFRL_AFRL5 ((uint32_t)0x00F00000)
+#define GPIO_AFRL_AFRL6 ((uint32_t)0x0F000000)
+#define GPIO_AFRL_AFRL7 ((uint32_t)0xF0000000)
+
+/****************** Bit definition for GPIO_AFRH register ********************/
+#define GPIO_AFRH_AFRH0 ((uint32_t)0x0000000F)
+#define GPIO_AFRH_AFRH1 ((uint32_t)0x000000F0)
+#define GPIO_AFRH_AFRH2 ((uint32_t)0x00000F00)
+#define GPIO_AFRH_AFRH3 ((uint32_t)0x0000F000)
+#define GPIO_AFRH_AFRH4 ((uint32_t)0x000F0000)
+#define GPIO_AFRH_AFRH5 ((uint32_t)0x00F00000)
+#define GPIO_AFRH_AFRH6 ((uint32_t)0x0F000000)
+#define GPIO_AFRH_AFRH7 ((uint32_t)0xF0000000)
+
+/****************** Bit definition for GPIO_BRR register *********************/
+#define GPIO_BRR_BR_0 ((uint32_t)0x00000001)
+#define GPIO_BRR_BR_1 ((uint32_t)0x00000002)
+#define GPIO_BRR_BR_2 ((uint32_t)0x00000004)
+#define GPIO_BRR_BR_3 ((uint32_t)0x00000008)
+#define GPIO_BRR_BR_4 ((uint32_t)0x00000010)
+#define GPIO_BRR_BR_5 ((uint32_t)0x00000020)
+#define GPIO_BRR_BR_6 ((uint32_t)0x00000040)
+#define GPIO_BRR_BR_7 ((uint32_t)0x00000080)
+#define GPIO_BRR_BR_8 ((uint32_t)0x00000100)
+#define GPIO_BRR_BR_9 ((uint32_t)0x00000200)
+#define GPIO_BRR_BR_10 ((uint32_t)0x00000400)
+#define GPIO_BRR_BR_11 ((uint32_t)0x00000800)
+#define GPIO_BRR_BR_12 ((uint32_t)0x00001000)
+#define GPIO_BRR_BR_13 ((uint32_t)0x00002000)
+#define GPIO_BRR_BR_14 ((uint32_t)0x00004000)
+#define GPIO_BRR_BR_15 ((uint32_t)0x00008000)
+
+/******************************************************************************/
+/* */
+/* Inter-integrated Circuit Interface (I2C) */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for I2C_CR1 register *******************/
+#define I2C_CR1_PE ((uint32_t)0x00000001) /*!< Peripheral enable */
+#define I2C_CR1_TXIE ((uint32_t)0x00000002) /*!< TX interrupt enable */
+#define I2C_CR1_RXIE ((uint32_t)0x00000004) /*!< RX interrupt enable */
+#define I2C_CR1_ADDRIE ((uint32_t)0x00000008) /*!< Address match interrupt enable */
+#define I2C_CR1_NACKIE ((uint32_t)0x00000010) /*!< NACK received interrupt enable */
+#define I2C_CR1_STOPIE ((uint32_t)0x00000020) /*!< STOP detection interrupt enable */
+#define I2C_CR1_TCIE ((uint32_t)0x00000040) /*!< Transfer complete interrupt enable */
+#define I2C_CR1_ERRIE ((uint32_t)0x00000080) /*!< Errors interrupt enable */
+#define I2C_CR1_DFN ((uint32_t)0x00000F00) /*!< Digital noise filter */
+#define I2C_CR1_ANFOFF ((uint32_t)0x00001000) /*!< Analog noise filter OFF */
+#define I2C_CR1_SWRST ((uint32_t)0x00002000) /*!< Software reset */
+#define I2C_CR1_TXDMAEN ((uint32_t)0x00004000) /*!< DMA transmission requests enable */
+#define I2C_CR1_RXDMAEN ((uint32_t)0x00008000) /*!< DMA reception requests enable */
+#define I2C_CR1_SBC ((uint32_t)0x00010000) /*!< Slave byte control */
+#define I2C_CR1_NOSTRETCH ((uint32_t)0x00020000) /*!< Clock stretching disable */
+#define I2C_CR1_GCEN ((uint32_t)0x00080000) /*!< General call enable */
+#define I2C_CR1_SMBHEN ((uint32_t)0x00100000) /*!< SMBus host address enable */
+#define I2C_CR1_SMBDEN ((uint32_t)0x00200000) /*!< SMBus device default address enable */
+#define I2C_CR1_ALERTEN ((uint32_t)0x00400000) /*!< SMBus alert enable */
+#define I2C_CR1_PECEN ((uint32_t)0x00800000) /*!< PEC enable */
+
+/****************** Bit definition for I2C_CR2 register ********************/
+#define I2C_CR2_SADD ((uint32_t)0x000003FF) /*!< Slave address (master mode) */
+#define I2C_CR2_RD_WRN ((uint32_t)0x00000400) /*!< Transfer direction (master mode) */
+#define I2C_CR2_ADD10 ((uint32_t)0x00000800) /*!< 10-bit addressing mode (master mode) */
+#define I2C_CR2_HEAD10R ((uint32_t)0x00001000) /*!< 10-bit address header only read direction (master mode) */
+#define I2C_CR2_START ((uint32_t)0x00002000) /*!< START generation */
+#define I2C_CR2_STOP ((uint32_t)0x00004000) /*!< STOP generation (master mode) */
+#define I2C_CR2_NACK ((uint32_t)0x00008000) /*!< NACK generation (slave mode) */
+#define I2C_CR2_NBYTES ((uint32_t)0x00FF0000) /*!< Number of bytes */
+#define I2C_CR2_RELOAD ((uint32_t)0x01000000) /*!< NBYTES reload mode */
+#define I2C_CR2_AUTOEND ((uint32_t)0x02000000) /*!< Automatic end mode (master mode) */
+#define I2C_CR2_PECBYTE ((uint32_t)0x04000000) /*!< Packet error checking byte */
+
+/******************* Bit definition for I2C_OAR1 register ******************/
+#define I2C_OAR1_OA1 ((uint32_t)0x000003FF) /*!< Interface own address 1 */
+#define I2C_OAR1_OA1MODE ((uint32_t)0x00000400) /*!< Own address 1 10-bit mode */
+#define I2C_OAR1_OA1EN ((uint32_t)0x00008000) /*!< Own address 1 enable */
+
+/******************* Bit definition for I2C_OAR2 register ******************/
+#define I2C_OAR2_OA2 ((uint32_t)0x000000FE) /*!< Interface own address 2 */
+#define I2C_OAR2_OA2MSK ((uint32_t)0x00000700) /*!< Own address 2 masks */
+#define I2C_OAR2_OA2EN ((uint32_t)0x00008000) /*!< Own address 2 enable */
+
+/******************* Bit definition for I2C_TIMINGR register ****************/
+#define I2C_TIMINGR_SCLL ((uint32_t)0x000000FF) /*!< SCL low period (master mode) */
+#define I2C_TIMINGR_SCLH ((uint32_t)0x0000FF00) /*!< SCL high period (master mode) */
+#define I2C_TIMINGR_SDADEL ((uint32_t)0x000F0000) /*!< Data hold time */
+#define I2C_TIMINGR_SCLDEL ((uint32_t)0x00F00000) /*!< Data setup time */
+#define I2C_TIMINGR_PRESC ((uint32_t)0xF0000000) /*!< Timings prescaler */
+
+/******************* Bit definition for I2C_TIMEOUTR register ****************/
+#define I2C_TIMEOUTR_TIMEOUTA ((uint32_t)0x00000FFF) /*!< Bus timeout A */
+#define I2C_TIMEOUTR_TIDLE ((uint32_t)0x00001000) /*!< Idle clock timeout detection */
+#define I2C_TIMEOUTR_TIMOUTEN ((uint32_t)0x00008000) /*!< Clock timeout enable */
+#define I2C_TIMEOUTR_TIMEOUTB ((uint32_t)0x0FFF0000) /*!< Bus timeout B*/
+#define I2C_TIMEOUTR_TEXTEN ((uint32_t)0x80000000) /*!< Extended clock timeout enable */
+
+/****************** Bit definition for I2C_ISR register ********************/
+#define I2C_ISR_TXE ((uint32_t)0x00000001) /*!< Transmit data register empty */
+#define I2C_ISR_TXIS ((uint32_t)0x00000002) /*!< Transmit interrupt status */
+#define I2C_ISR_RXNE ((uint32_t)0x00000004) /*!< Receive data register not empty */
+#define I2C_ISR_ADDR ((uint32_t)0x00000008) /*!< Address matched (slave mode)*/
+#define I2C_ISR_NACKF ((uint32_t)0x00000010) /*!< NACK received flag */
+#define I2C_ISR_STOPF ((uint32_t)0x00000020) /*!< STOP detection flag */
+#define I2C_ISR_TC ((uint32_t)0x00000040) /*!< Transfer complete (master mode) */
+#define I2C_ISR_TCR ((uint32_t)0x00000080) /*!< Transfer complete reload */
+#define I2C_ISR_BERR ((uint32_t)0x00000100) /*!< Bus error */
+#define I2C_ISR_ARLO ((uint32_t)0x00000200) /*!< Arbitration lost */
+#define I2C_ISR_OVR ((uint32_t)0x00000400) /*!< Overrun/Underrun */
+#define I2C_ISR_PECERR ((uint32_t)0x00000800) /*!< PEC error in reception */
+#define I2C_ISR_TIMEOUT ((uint32_t)0x00001000) /*!< Timeout or Tlow detection flag */
+#define I2C_ISR_ALERT ((uint32_t)0x00002000) /*!< SMBus alert */
+#define I2C_ISR_BUSY ((uint32_t)0x00008000) /*!< Bus busy */
+#define I2C_ISR_DIR ((uint32_t)0x00010000) /*!< Transfer direction (slave mode) */
+#define I2C_ISR_ADDCODE ((uint32_t)0x00FE0000) /*!< Address match code (slave mode) */
+
+/****************** Bit definition for I2C_ICR register ********************/
+#define I2C_ICR_ADDRCF ((uint32_t)0x00000008) /*!< Address matched clear flag */
+#define I2C_ICR_NACKCF ((uint32_t)0x00000010) /*!< NACK clear flag */
+#define I2C_ICR_STOPCF ((uint32_t)0x00000020) /*!< STOP detection clear flag */
+#define I2C_ICR_BERRCF ((uint32_t)0x00000100) /*!< Bus error clear flag */
+#define I2C_ICR_ARLOCF ((uint32_t)0x00000200) /*!< Arbitration lost clear flag */
+#define I2C_ICR_OVRCF ((uint32_t)0x00000400) /*!< Overrun/Underrun clear flag */
+#define I2C_ICR_PECCF ((uint32_t)0x00000800) /*!< PAC error clear flag */
+#define I2C_ICR_TIMOUTCF ((uint32_t)0x00001000) /*!< Timeout clear flag */
+#define I2C_ICR_ALERTCF ((uint32_t)0x00002000) /*!< Alert clear flag */
+
+/****************** Bit definition for I2C_PECR register *******************/
+#define I2C_PECR_PEC ((uint32_t)0x000000FF) /*!< PEC register */
+
+/****************** Bit definition for I2C_RXDR register *********************/
+#define I2C_RXDR_RXDATA ((uint32_t)0x000000FF) /*!< 8-bit receive data */
+
+/****************** Bit definition for I2C_TXDR register *******************/
+#define I2C_TXDR_TXDATA ((uint32_t)0x000000FF) /*!< 8-bit transmit data */
+
+/*****************************************************************************/
+/* */
+/* Independent WATCHDOG (IWDG) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for IWDG_KR register *******************/
+#define IWDG_KR_KEY ((uint32_t)0xFFFF) /*!< Key value (write only, read 0000h) */
+
+/******************* Bit definition for IWDG_PR register *******************/
+#define IWDG_PR_PR ((uint32_t)0x07) /*!< PR[2:0] (Prescaler divider) */
+#define IWDG_PR_PR_0 ((uint32_t)0x01) /*!< Bit 0 */
+#define IWDG_PR_PR_1 ((uint32_t)0x02) /*!< Bit 1 */
+#define IWDG_PR_PR_2 ((uint32_t)0x04) /*!< Bit 2 */
+
+/******************* Bit definition for IWDG_RLR register ******************/
+#define IWDG_RLR_RL ((uint32_t)0x0FFF) /*!< Watchdog counter reload value */
+
+/******************* Bit definition for IWDG_SR register *******************/
+#define IWDG_SR_PVU ((uint32_t)0x01) /*!< Watchdog prescaler value update */
+#define IWDG_SR_RVU ((uint32_t)0x02) /*!< Watchdog counter reload value update */
+#define IWDG_SR_WVU ((uint32_t)0x04) /*!< Watchdog counter window value update */
+
+/******************* Bit definition for IWDG_KR register *******************/
+#define IWDG_WINR_WIN ((uint32_t)0x0FFF) /*!< Watchdog counter window value */
+
+/*****************************************************************************/
+/* */
+/* Power Control (PWR) */
+/* */
+/*****************************************************************************/
+
+/******************** Bit definition for PWR_CR register *******************/
+#define PWR_CR_LPDS ((uint32_t)0x00000001) /*!< Low-power Deepsleep */
+#define PWR_CR_PDDS ((uint32_t)0x00000002) /*!< Power Down Deepsleep */
+#define PWR_CR_CWUF ((uint32_t)0x00000004) /*!< Clear Wakeup Flag */
+#define PWR_CR_CSBF ((uint32_t)0x00000008) /*!< Clear Standby Flag */
+#define PWR_CR_DBP ((uint32_t)0x00000100) /*!< Disable Backup Domain write protection */
+
+/******************* Bit definition for PWR_CSR register *******************/
+#define PWR_CSR_WUF ((uint32_t)0x00000001) /*!< Wakeup Flag */
+#define PWR_CSR_SBF ((uint32_t)0x00000002) /*!< Standby Flag */
+
+#define PWR_CSR_EWUP1 ((uint32_t)0x00000100) /*!< Enable WKUP pin 1 */
+#define PWR_CSR_EWUP2 ((uint32_t)0x00000200) /*!< Enable WKUP pin 2 */
+
+/*****************************************************************************/
+/* */
+/* Reset and Clock Control */
+/* */
+/*****************************************************************************/
+
+/******************** Bit definition for RCC_CR register *******************/
+#define RCC_CR_HSION ((uint32_t)0x00000001) /*!< Internal High Speed clock enable */
+#define RCC_CR_HSIRDY ((uint32_t)0x00000002) /*!< Internal High Speed clock ready flag */
+
+#define RCC_CR_HSITRIM ((uint32_t)0x000000F8) /*!< Internal High Speed clock trimming */
+#define RCC_CR_HSITRIM_0 ((uint32_t)0x00000008) /*!<Bit 0 */
+#define RCC_CR_HSITRIM_1 ((uint32_t)0x00000010) /*!<Bit 1 */
+#define RCC_CR_HSITRIM_2 ((uint32_t)0x00000020) /*!<Bit 2 */
+#define RCC_CR_HSITRIM_3 ((uint32_t)0x00000040) /*!<Bit 3 */
+#define RCC_CR_HSITRIM_4 ((uint32_t)0x00000080) /*!<Bit 4 */
+
+#define RCC_CR_HSICAL ((uint32_t)0x0000FF00) /*!< Internal High Speed clock Calibration */
+#define RCC_CR_HSICAL_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define RCC_CR_HSICAL_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define RCC_CR_HSICAL_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define RCC_CR_HSICAL_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define RCC_CR_HSICAL_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+#define RCC_CR_HSICAL_5 ((uint32_t)0x00002000) /*!<Bit 5 */
+#define RCC_CR_HSICAL_6 ((uint32_t)0x00004000) /*!<Bit 6 */
+#define RCC_CR_HSICAL_7 ((uint32_t)0x00008000) /*!<Bit 7 */
+
+#define RCC_CR_HSEON ((uint32_t)0x00010000) /*!< External High Speed clock enable */
+#define RCC_CR_HSERDY ((uint32_t)0x00020000) /*!< External High Speed clock ready flag */
+#define RCC_CR_HSEBYP ((uint32_t)0x00040000) /*!< External High Speed clock Bypass */
+#define RCC_CR_CSSON ((uint32_t)0x00080000) /*!< Clock Security System enable */
+#define RCC_CR_PLLON ((uint32_t)0x01000000) /*!< PLL enable */
+#define RCC_CR_PLLRDY ((uint32_t)0x02000000) /*!< PLL clock ready flag */
+
+/******************** Bit definition for RCC_CFGR register *****************/
+/*!< SW configuration */
+#define RCC_CFGR_SW ((uint32_t)0x00000003) /*!< SW[1:0] bits (System clock Switch) */
+#define RCC_CFGR_SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR_SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+#define RCC_CFGR_SW_HSI ((uint32_t)0x00000000) /*!< HSI selected as system clock */
+#define RCC_CFGR_SW_HSE ((uint32_t)0x00000001) /*!< HSE selected as system clock */
+#define RCC_CFGR_SW_PLL ((uint32_t)0x00000002) /*!< PLL selected as system clock */
+
+/*!< SWS configuration */
+#define RCC_CFGR_SWS ((uint32_t)0x0000000C) /*!< SWS[1:0] bits (System Clock Switch Status) */
+#define RCC_CFGR_SWS_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define RCC_CFGR_SWS_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+
+#define RCC_CFGR_SWS_HSI ((uint32_t)0x00000000) /*!< HSI oscillator used as system clock */
+#define RCC_CFGR_SWS_HSE ((uint32_t)0x00000004) /*!< HSE oscillator used as system clock */
+#define RCC_CFGR_SWS_PLL ((uint32_t)0x00000008) /*!< PLL used as system clock */
+
+/*!< HPRE configuration */
+#define RCC_CFGR_HPRE ((uint32_t)0x000000F0) /*!< HPRE[3:0] bits (AHB prescaler) */
+#define RCC_CFGR_HPRE_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define RCC_CFGR_HPRE_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define RCC_CFGR_HPRE_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+#define RCC_CFGR_HPRE_3 ((uint32_t)0x00000080) /*!< Bit 3 */
+
+#define RCC_CFGR_HPRE_DIV1 ((uint32_t)0x00000000) /*!< SYSCLK not divided */
+#define RCC_CFGR_HPRE_DIV2 ((uint32_t)0x00000080) /*!< SYSCLK divided by 2 */
+#define RCC_CFGR_HPRE_DIV4 ((uint32_t)0x00000090) /*!< SYSCLK divided by 4 */
+#define RCC_CFGR_HPRE_DIV8 ((uint32_t)0x000000A0) /*!< SYSCLK divided by 8 */
+#define RCC_CFGR_HPRE_DIV16 ((uint32_t)0x000000B0) /*!< SYSCLK divided by 16 */
+#define RCC_CFGR_HPRE_DIV64 ((uint32_t)0x000000C0) /*!< SYSCLK divided by 64 */
+#define RCC_CFGR_HPRE_DIV128 ((uint32_t)0x000000D0) /*!< SYSCLK divided by 128 */
+#define RCC_CFGR_HPRE_DIV256 ((uint32_t)0x000000E0) /*!< SYSCLK divided by 256 */
+#define RCC_CFGR_HPRE_DIV512 ((uint32_t)0x000000F0) /*!< SYSCLK divided by 512 */
+
+/*!< PPRE configuration */
+#define RCC_CFGR_PPRE ((uint32_t)0x00000700) /*!< PRE[2:0] bits (APB prescaler) */
+#define RCC_CFGR_PPRE_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define RCC_CFGR_PPRE_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define RCC_CFGR_PPRE_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+
+#define RCC_CFGR_PPRE_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */
+#define RCC_CFGR_PPRE_DIV2 ((uint32_t)0x00000400) /*!< HCLK divided by 2 */
+#define RCC_CFGR_PPRE_DIV4 ((uint32_t)0x00000500) /*!< HCLK divided by 4 */
+#define RCC_CFGR_PPRE_DIV8 ((uint32_t)0x00000600) /*!< HCLK divided by 8 */
+#define RCC_CFGR_PPRE_DIV16 ((uint32_t)0x00000700) /*!< HCLK divided by 16 */
+
+/*!< ADCPPRE configuration */
+#define RCC_CFGR_ADCPRE ((uint32_t)0x00004000) /*!< ADCPRE bit (ADC prescaler) */
+
+#define RCC_CFGR_ADCPRE_DIV2 ((uint32_t)0x00000000) /*!< PCLK divided by 2 */
+#define RCC_CFGR_ADCPRE_DIV4 ((uint32_t)0x00004000) /*!< PCLK divided by 4 */
+
+#define RCC_CFGR_PLLSRC ((uint32_t)0x00018000) /*!< PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSI_DIV2 ((uint32_t)0x00000000) /*!< HSI clock divided by 2 selected as PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSI_PREDIV ((uint32_t)0x00008000) /*!< HSI/PREDIV clock selected as PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSE_PREDIV ((uint32_t)0x00010000) /*!< HSE/PREDIV clock selected as PLL entry clock source */
+
+#define RCC_CFGR_PLLXTPRE ((uint32_t)0x00020000) /*!< HSE divider for PLL entry */
+#define RCC_CFGR_PLLXTPRE_HSE_PREDIV_DIV1 ((uint32_t)0x00000000) /*!< HSE/PREDIV clock not divided for PLL entry */
+#define RCC_CFGR_PLLXTPRE_HSE_PREDIV_DIV2 ((uint32_t)0x00020000) /*!< HSE/PREDIV clock divided by 2 for PLL entry */
+
+/*!< PLLMUL configuration */
+#define RCC_CFGR_PLLMUL ((uint32_t)0x003C0000) /*!< PLLMUL[3:0] bits (PLL multiplication factor) */
+#define RCC_CFGR_PLLMUL_0 ((uint32_t)0x00040000) /*!< Bit 0 */
+#define RCC_CFGR_PLLMUL_1 ((uint32_t)0x00080000) /*!< Bit 1 */
+#define RCC_CFGR_PLLMUL_2 ((uint32_t)0x00100000) /*!< Bit 2 */
+#define RCC_CFGR_PLLMUL_3 ((uint32_t)0x00200000) /*!< Bit 3 */
+
+#define RCC_CFGR_PLLMUL2 ((uint32_t)0x00000000) /*!< PLL input clock*2 */
+#define RCC_CFGR_PLLMUL3 ((uint32_t)0x00040000) /*!< PLL input clock*3 */
+#define RCC_CFGR_PLLMUL4 ((uint32_t)0x00080000) /*!< PLL input clock*4 */
+#define RCC_CFGR_PLLMUL5 ((uint32_t)0x000C0000) /*!< PLL input clock*5 */
+#define RCC_CFGR_PLLMUL6 ((uint32_t)0x00100000) /*!< PLL input clock*6 */
+#define RCC_CFGR_PLLMUL7 ((uint32_t)0x00140000) /*!< PLL input clock*7 */
+#define RCC_CFGR_PLLMUL8 ((uint32_t)0x00180000) /*!< PLL input clock*8 */
+#define RCC_CFGR_PLLMUL9 ((uint32_t)0x001C0000) /*!< PLL input clock*9 */
+#define RCC_CFGR_PLLMUL10 ((uint32_t)0x00200000) /*!< PLL input clock10 */
+#define RCC_CFGR_PLLMUL11 ((uint32_t)0x00240000) /*!< PLL input clock*11 */
+#define RCC_CFGR_PLLMUL12 ((uint32_t)0x00280000) /*!< PLL input clock*12 */
+#define RCC_CFGR_PLLMUL13 ((uint32_t)0x002C0000) /*!< PLL input clock*13 */
+#define RCC_CFGR_PLLMUL14 ((uint32_t)0x00300000) /*!< PLL input clock*14 */
+#define RCC_CFGR_PLLMUL15 ((uint32_t)0x00340000) /*!< PLL input clock*15 */
+#define RCC_CFGR_PLLMUL16 ((uint32_t)0x00380000) /*!< PLL input clock*16 */
+
+/*!< USB configuration */
+#define RCC_CFGR_USBPRE ((uint32_t)0x00400000) /*!< USB prescaler */
+
+/*!< MCO configuration */
+#define RCC_CFGR_MCO ((uint32_t)0x0F000000) /*!< MCO[3:0] bits (Microcontroller Clock Output) */
+#define RCC_CFGR_MCO_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define RCC_CFGR_MCO_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define RCC_CFGR_MCO_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+#define RCC_CFGR_MCO_3 ((uint32_t)0x08000000) /*!< Bit 3 */
+
+#define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
+#define RCC_CFGR_MCO_HSI14 ((uint32_t)0x01000000) /*!< HSI14 clock selected as MCO source */
+#define RCC_CFGR_MCO_LSI ((uint32_t)0x02000000) /*!< LSI clock selected as MCO source */
+#define RCC_CFGR_MCO_LSE ((uint32_t)0x03000000) /*!< LSE clock selected as MCO source */
+#define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x04000000) /*!< System clock selected as MCO source */
+#define RCC_CFGR_MCO_HSI ((uint32_t)0x05000000) /*!< HSI clock selected as MCO source */
+#define RCC_CFGR_MCO_HSE ((uint32_t)0x06000000) /*!< HSE clock selected as MCO source */
+#define RCC_CFGR_MCO_PLL ((uint32_t)0x07000000) /*!< PLL clock divided by 2 selected as MCO source */
+
+#define RCC_CFGR_MCOPRE ((uint32_t)0x70000000) /*!< MCO prescaler */
+#define RCC_CFGR_MCOPRE_DIV1 ((uint32_t)0x00000000) /*!< MCO is divided by 1 */
+#define RCC_CFGR_MCOPRE_DIV2 ((uint32_t)0x10000000) /*!< MCO is divided by 2 */
+#define RCC_CFGR_MCOPRE_DIV4 ((uint32_t)0x20000000) /*!< MCO is divided by 4 */
+#define RCC_CFGR_MCOPRE_DIV8 ((uint32_t)0x30000000) /*!< MCO is divided by 8 */
+#define RCC_CFGR_MCOPRE_DIV16 ((uint32_t)0x40000000) /*!< MCO is divided by 16 */
+#define RCC_CFGR_MCOPRE_DIV32 ((uint32_t)0x50000000) /*!< MCO is divided by 32 */
+#define RCC_CFGR_MCOPRE_DIV64 ((uint32_t)0x60000000) /*!< MCO is divided by 64 */
+#define RCC_CFGR_MCOPRE_DIV128 ((uint32_t)0x70000000) /*!< MCO is divided by 128 */
+
+#define RCC_CFGR_PLLNODIV ((uint32_t)0x80000000) /*!< PLL is not divided to MCO */
+
+/*!<****************** Bit definition for RCC_CIR register *****************/
+#define RCC_CIR_LSIRDYF ((uint32_t)0x00000001) /*!< LSI Ready Interrupt flag */
+#define RCC_CIR_LSERDYF ((uint32_t)0x00000002) /*!< LSE Ready Interrupt flag */
+#define RCC_CIR_HSIRDYF ((uint32_t)0x00000004) /*!< HSI Ready Interrupt flag */
+#define RCC_CIR_HSERDYF ((uint32_t)0x00000008) /*!< HSE Ready Interrupt flag */
+#define RCC_CIR_PLLRDYF ((uint32_t)0x00000010) /*!< PLL Ready Interrupt flag */
+#define RCC_CIR_HSI14RDYF ((uint32_t)0x00000020) /*!< HSI14 Ready Interrupt flag */
+#define RCC_CIR_CSSF ((uint32_t)0x00000080) /*!< Clock Security System Interrupt flag */
+#define RCC_CIR_LSIRDYIE ((uint32_t)0x00000100) /*!< LSI Ready Interrupt Enable */
+#define RCC_CIR_LSERDYIE ((uint32_t)0x00000200) /*!< LSE Ready Interrupt Enable */
+#define RCC_CIR_HSIRDYIE ((uint32_t)0x00000400) /*!< HSI Ready Interrupt Enable */
+#define RCC_CIR_HSERDYIE ((uint32_t)0x00000800) /*!< HSE Ready Interrupt Enable */
+#define RCC_CIR_PLLRDYIE ((uint32_t)0x00001000) /*!< PLL Ready Interrupt Enable */
+#define RCC_CIR_HSI14RDYIE ((uint32_t)0x00002000) /*!< HSI14 Ready Interrupt Enable */
+#define RCC_CIR_LSIRDYC ((uint32_t)0x00010000) /*!< LSI Ready Interrupt Clear */
+#define RCC_CIR_LSERDYC ((uint32_t)0x00020000) /*!< LSE Ready Interrupt Clear */
+#define RCC_CIR_HSIRDYC ((uint32_t)0x00040000) /*!< HSI Ready Interrupt Clear */
+#define RCC_CIR_HSERDYC ((uint32_t)0x00080000) /*!< HSE Ready Interrupt Clear */
+#define RCC_CIR_PLLRDYC ((uint32_t)0x00100000) /*!< PLL Ready Interrupt Clear */
+#define RCC_CIR_HSI14RDYC ((uint32_t)0x00200000) /*!< HSI14 Ready Interrupt Clear */
+#define RCC_CIR_CSSC ((uint32_t)0x00800000) /*!< Clock Security System Interrupt Clear */
+
+/***************** Bit definition for RCC_APB2RSTR register ****************/
+#define RCC_APB2RSTR_SYSCFGRST ((uint32_t)0x00000001) /*!< SYSCFG clock reset */
+#define RCC_APB2RSTR_ADCRST ((uint32_t)0x00000200) /*!< ADC clock reset */
+#define RCC_APB2RSTR_TIM1RST ((uint32_t)0x00000800) /*!< TIM1 clock reset */
+#define RCC_APB2RSTR_SPI1RST ((uint32_t)0x00001000) /*!< SPI1 clock reset */
+#define RCC_APB2RSTR_USART1RST ((uint32_t)0x00004000) /*!< USART1 clock reset */
+#define RCC_APB2RSTR_TIM16RST ((uint32_t)0x00020000) /*!< TIM16 clock reset */
+#define RCC_APB2RSTR_TIM17RST ((uint32_t)0x00040000) /*!< TIM17 clock reset */
+#define RCC_APB2RSTR_DBGMCURST ((uint32_t)0x00400000) /*!< DBGMCU clock reset */
+
+/*!< Old ADC1 clock reset bit definition maintained for legacy purpose */
+#define RCC_APB2RSTR_ADC1RST RCC_APB2RSTR_ADCRST
+
+/***************** Bit definition for RCC_APB1RSTR register ****************/
+#define RCC_APB1RSTR_TIM3RST ((uint32_t)0x00000002) /*!< Timer 3 clock reset */
+#define RCC_APB1RSTR_TIM14RST ((uint32_t)0x00000100) /*!< Timer 14 clock reset */
+#define RCC_APB1RSTR_WWDGRST ((uint32_t)0x00000800) /*!< Window Watchdog clock reset */
+#define RCC_APB1RSTR_USART2RST ((uint32_t)0x00020000) /*!< USART 2 clock reset */
+#define RCC_APB1RSTR_I2C1RST ((uint32_t)0x00200000) /*!< I2C 1 clock reset */
+#define RCC_APB1RSTR_USBRST ((uint32_t)0x00800000) /*!< USB clock reset */
+#define RCC_APB1RSTR_PWRRST ((uint32_t)0x10000000) /*!< PWR clock reset */
+
+/****************** Bit definition for RCC_AHBENR register *****************/
+#define RCC_AHBENR_DMAEN ((uint32_t)0x00000001) /*!< DMA1 clock enable */
+#define RCC_AHBENR_SRAMEN ((uint32_t)0x00000004) /*!< SRAM interface clock enable */
+#define RCC_AHBENR_FLITFEN ((uint32_t)0x00000010) /*!< FLITF clock enable */
+#define RCC_AHBENR_CRCEN ((uint32_t)0x00000040) /*!< CRC clock enable */
+#define RCC_AHBENR_GPIOAEN ((uint32_t)0x00020000) /*!< GPIOA clock enable */
+#define RCC_AHBENR_GPIOBEN ((uint32_t)0x00040000) /*!< GPIOB clock enable */
+#define RCC_AHBENR_GPIOCEN ((uint32_t)0x00080000) /*!< GPIOC clock enable */
+#define RCC_AHBENR_GPIOFEN ((uint32_t)0x00400000) /*!< GPIOF clock enable */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_AHBENR_DMA1EN RCC_AHBENR_DMAEN /*!< DMA1 clock enable */
+
+/***************** Bit definition for RCC_APB2ENR register *****************/
+#define RCC_APB2ENR_SYSCFGCOMPEN ((uint32_t)0x00000001) /*!< SYSCFG and comparator clock enable */
+#define RCC_APB2ENR_ADCEN ((uint32_t)0x00000200) /*!< ADC1 clock enable */
+#define RCC_APB2ENR_TIM1EN ((uint32_t)0x00000800) /*!< TIM1 clock enable */
+#define RCC_APB2ENR_SPI1EN ((uint32_t)0x00001000) /*!< SPI1 clock enable */
+#define RCC_APB2ENR_USART1EN ((uint32_t)0x00004000) /*!< USART1 clock enable */
+#define RCC_APB2ENR_TIM16EN ((uint32_t)0x00020000) /*!< TIM16 clock enable */
+#define RCC_APB2ENR_TIM17EN ((uint32_t)0x00040000) /*!< TIM17 clock enable */
+#define RCC_APB2ENR_DBGMCUEN ((uint32_t)0x00400000) /*!< DBGMCU clock enable */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_APB2ENR_SYSCFGEN RCC_APB2ENR_SYSCFGCOMPEN /*!< SYSCFG clock enable */
+#define RCC_APB2ENR_ADC1EN RCC_APB2ENR_ADCEN /*!< ADC1 clock enable */
+
+/***************** Bit definition for RCC_APB1ENR register *****************/
+#define RCC_APB1ENR_TIM3EN ((uint32_t)0x00000002) /*!< Timer 3 clock enable */
+#define RCC_APB1ENR_TIM14EN ((uint32_t)0x00000100) /*!< Timer 14 clock enable */
+#define RCC_APB1ENR_WWDGEN ((uint32_t)0x00000800) /*!< Window Watchdog clock enable */
+#define RCC_APB1ENR_USART2EN ((uint32_t)0x00020000) /*!< USART2 clock enable */
+#define RCC_APB1ENR_I2C1EN ((uint32_t)0x00200000) /*!< I2C1 clock enable */
+#define RCC_APB1ENR_USBEN ((uint32_t)0x00800000) /*!< USB clock enable */
+#define RCC_APB1ENR_PWREN ((uint32_t)0x10000000) /*!< PWR clock enable */
+
+/******************* Bit definition for RCC_BDCR register ******************/
+#define RCC_BDCR_LSEON ((uint32_t)0x00000001) /*!< External Low Speed oscillator enable */
+#define RCC_BDCR_LSERDY ((uint32_t)0x00000002) /*!< External Low Speed oscillator Ready */
+#define RCC_BDCR_LSEBYP ((uint32_t)0x00000004) /*!< External Low Speed oscillator Bypass */
+
+#define RCC_BDCR_LSEDRV ((uint32_t)0x00000018) /*!< LSEDRV[1:0] bits (LSE Osc. drive capability) */
+#define RCC_BDCR_LSEDRV_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define RCC_BDCR_LSEDRV_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+
+#define RCC_BDCR_RTCSEL ((uint32_t)0x00000300) /*!< RTCSEL[1:0] bits (RTC clock source selection) */
+#define RCC_BDCR_RTCSEL_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define RCC_BDCR_RTCSEL_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+
+/*!< RTC configuration */
+#define RCC_BDCR_RTCSEL_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
+#define RCC_BDCR_RTCSEL_LSE ((uint32_t)0x00000100) /*!< LSE oscillator clock used as RTC clock */
+#define RCC_BDCR_RTCSEL_LSI ((uint32_t)0x00000200) /*!< LSI oscillator clock used as RTC clock */
+#define RCC_BDCR_RTCSEL_HSE ((uint32_t)0x00000300) /*!< HSE oscillator clock divided by 128 used as RTC clock */
+
+#define RCC_BDCR_RTCEN ((uint32_t)0x00008000) /*!< RTC clock enable */
+#define RCC_BDCR_BDRST ((uint32_t)0x00010000) /*!< Backup domain software reset */
+
+/******************* Bit definition for RCC_CSR register *******************/
+#define RCC_CSR_LSION ((uint32_t)0x00000001) /*!< Internal Low Speed oscillator enable */
+#define RCC_CSR_LSIRDY ((uint32_t)0x00000002) /*!< Internal Low Speed oscillator Ready */
+#define RCC_CSR_V18PWRRSTF ((uint32_t)0x00800000) /*!< V1.8 power domain reset flag */
+#define RCC_CSR_RMVF ((uint32_t)0x01000000) /*!< Remove reset flag */
+#define RCC_CSR_OBLRSTF ((uint32_t)0x02000000) /*!< OBL reset flag */
+#define RCC_CSR_PINRSTF ((uint32_t)0x04000000) /*!< PIN reset flag */
+#define RCC_CSR_PORRSTF ((uint32_t)0x08000000) /*!< POR/PDR reset flag */
+#define RCC_CSR_SFTRSTF ((uint32_t)0x10000000) /*!< Software Reset flag */
+#define RCC_CSR_IWDGRSTF ((uint32_t)0x20000000) /*!< Independent Watchdog reset flag */
+#define RCC_CSR_WWDGRSTF ((uint32_t)0x40000000) /*!< Window watchdog reset flag */
+#define RCC_CSR_LPWRRSTF ((uint32_t)0x80000000) /*!< Low-Power reset flag */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_CSR_OBL RCC_CSR_OBLRSTF /*!< OBL reset flag */
+
+/******************* Bit definition for RCC_AHBRSTR register ***************/
+#define RCC_AHBRSTR_GPIOARST ((uint32_t)0x00020000) /*!< GPIOA clock reset */
+#define RCC_AHBRSTR_GPIOBRST ((uint32_t)0x00040000) /*!< GPIOB clock reset */
+#define RCC_AHBRSTR_GPIOCRST ((uint32_t)0x00080000) /*!< GPIOC clock reset */
+#define RCC_AHBRSTR_GPIOFRST ((uint32_t)0x00400000) /*!< GPIOF clock reset */
+
+/******************* Bit definition for RCC_CFGR2 register *****************/
+/*!< PREDIV configuration */
+#define RCC_CFGR2_PREDIV ((uint32_t)0x0000000F) /*!< PREDIV[3:0] bits */
+#define RCC_CFGR2_PREDIV_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR2_PREDIV_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define RCC_CFGR2_PREDIV_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define RCC_CFGR2_PREDIV_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+
+#define RCC_CFGR2_PREDIV_DIV1 ((uint32_t)0x00000000) /*!< PREDIV input clock not divided */
+#define RCC_CFGR2_PREDIV_DIV2 ((uint32_t)0x00000001) /*!< PREDIV input clock divided by 2 */
+#define RCC_CFGR2_PREDIV_DIV3 ((uint32_t)0x00000002) /*!< PREDIV input clock divided by 3 */
+#define RCC_CFGR2_PREDIV_DIV4 ((uint32_t)0x00000003) /*!< PREDIV input clock divided by 4 */
+#define RCC_CFGR2_PREDIV_DIV5 ((uint32_t)0x00000004) /*!< PREDIV input clock divided by 5 */
+#define RCC_CFGR2_PREDIV_DIV6 ((uint32_t)0x00000005) /*!< PREDIV input clock divided by 6 */
+#define RCC_CFGR2_PREDIV_DIV7 ((uint32_t)0x00000006) /*!< PREDIV input clock divided by 7 */
+#define RCC_CFGR2_PREDIV_DIV8 ((uint32_t)0x00000007) /*!< PREDIV input clock divided by 8 */
+#define RCC_CFGR2_PREDIV_DIV9 ((uint32_t)0x00000008) /*!< PREDIV input clock divided by 9 */
+#define RCC_CFGR2_PREDIV_DIV10 ((uint32_t)0x00000009) /*!< PREDIV input clock divided by 10 */
+#define RCC_CFGR2_PREDIV_DIV11 ((uint32_t)0x0000000A) /*!< PREDIV input clock divided by 11 */
+#define RCC_CFGR2_PREDIV_DIV12 ((uint32_t)0x0000000B) /*!< PREDIV input clock divided by 12 */
+#define RCC_CFGR2_PREDIV_DIV13 ((uint32_t)0x0000000C) /*!< PREDIV input clock divided by 13 */
+#define RCC_CFGR2_PREDIV_DIV14 ((uint32_t)0x0000000D) /*!< PREDIV input clock divided by 14 */
+#define RCC_CFGR2_PREDIV_DIV15 ((uint32_t)0x0000000E) /*!< PREDIV input clock divided by 15 */
+#define RCC_CFGR2_PREDIV_DIV16 ((uint32_t)0x0000000F) /*!< PREDIV input clock divided by 16 */
+
+/******************* Bit definition for RCC_CFGR3 register *****************/
+/*!< USART1 Clock source selection */
+#define RCC_CFGR3_USART1SW ((uint32_t)0x00000003) /*!< USART1SW[1:0] bits */
+#define RCC_CFGR3_USART1SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR3_USART1SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+#define RCC_CFGR3_USART1SW_PCLK ((uint32_t)0x00000000) /*!< PCLK clock used as USART1 clock source */
+#define RCC_CFGR3_USART1SW_SYSCLK ((uint32_t)0x00000001) /*!< System clock selected as USART1 clock source */
+#define RCC_CFGR3_USART1SW_LSE ((uint32_t)0x00000002) /*!< LSE oscillator clock used as USART1 clock source */
+#define RCC_CFGR3_USART1SW_HSI ((uint32_t)0x00000003) /*!< HSI oscillator clock used as USART1 clock source */
+
+/*!< I2C1 Clock source selection */
+#define RCC_CFGR3_I2C1SW ((uint32_t)0x00000010) /*!< I2C1SW bits */
+
+#define RCC_CFGR3_I2C1SW_HSI ((uint32_t)0x00000000) /*!< HSI oscillator clock used as I2C1 clock source */
+#define RCC_CFGR3_I2C1SW_SYSCLK ((uint32_t)0x00000010) /*!< System clock selected as I2C1 clock source */
+
+/*!< USB Clock source selection */
+#define RCC_CFGR3_USBSW ((uint32_t)0x00000080) /*!< USBSW bits */
+
+#define RCC_CFGR3_USBSW_PLLCLK ((uint32_t)0x00000080) /*!< PLLCLK selected as USB clock source */
+
+/******************* Bit definition for RCC_CR2 register *******************/
+#define RCC_CR2_HSI14ON ((uint32_t)0x00000001) /*!< Internal High Speed 14MHz clock enable */
+#define RCC_CR2_HSI14RDY ((uint32_t)0x00000002) /*!< Internal High Speed 14MHz clock ready flag */
+#define RCC_CR2_HSI14DIS ((uint32_t)0x00000004) /*!< Internal High Speed 14MHz clock disable */
+#define RCC_CR2_HSI14TRIM ((uint32_t)0x000000F8) /*!< Internal High Speed 14MHz clock trimming */
+#define RCC_CR2_HSI14CAL ((uint32_t)0x0000FF00) /*!< Internal High Speed 14MHz clock Calibration */
+
+/*****************************************************************************/
+/* */
+/* Real-Time Clock (RTC) */
+/* */
+/*****************************************************************************/
+/******************** Bits definition for RTC_TR register ******************/
+#define RTC_TR_PM ((uint32_t)0x00400000)
+#define RTC_TR_HT ((uint32_t)0x00300000)
+#define RTC_TR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TR_HU ((uint32_t)0x000F0000)
+#define RTC_TR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TR_MNT ((uint32_t)0x00007000)
+#define RTC_TR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TR_MNU ((uint32_t)0x00000F00)
+#define RTC_TR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TR_ST ((uint32_t)0x00000070)
+#define RTC_TR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TR_SU ((uint32_t)0x0000000F)
+#define RTC_TR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_DR register ******************/
+#define RTC_DR_YT ((uint32_t)0x00F00000)
+#define RTC_DR_YT_0 ((uint32_t)0x00100000)
+#define RTC_DR_YT_1 ((uint32_t)0x00200000)
+#define RTC_DR_YT_2 ((uint32_t)0x00400000)
+#define RTC_DR_YT_3 ((uint32_t)0x00800000)
+#define RTC_DR_YU ((uint32_t)0x000F0000)
+#define RTC_DR_YU_0 ((uint32_t)0x00010000)
+#define RTC_DR_YU_1 ((uint32_t)0x00020000)
+#define RTC_DR_YU_2 ((uint32_t)0x00040000)
+#define RTC_DR_YU_3 ((uint32_t)0x00080000)
+#define RTC_DR_WDU ((uint32_t)0x0000E000)
+#define RTC_DR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_DR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_DR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_DR_MT ((uint32_t)0x00001000)
+#define RTC_DR_MU ((uint32_t)0x00000F00)
+#define RTC_DR_MU_0 ((uint32_t)0x00000100)
+#define RTC_DR_MU_1 ((uint32_t)0x00000200)
+#define RTC_DR_MU_2 ((uint32_t)0x00000400)
+#define RTC_DR_MU_3 ((uint32_t)0x00000800)
+#define RTC_DR_DT ((uint32_t)0x00000030)
+#define RTC_DR_DT_0 ((uint32_t)0x00000010)
+#define RTC_DR_DT_1 ((uint32_t)0x00000020)
+#define RTC_DR_DU ((uint32_t)0x0000000F)
+#define RTC_DR_DU_0 ((uint32_t)0x00000001)
+#define RTC_DR_DU_1 ((uint32_t)0x00000002)
+#define RTC_DR_DU_2 ((uint32_t)0x00000004)
+#define RTC_DR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_CR register ******************/
+#define RTC_CR_COE ((uint32_t)0x00800000)
+#define RTC_CR_OSEL ((uint32_t)0x00600000)
+#define RTC_CR_OSEL_0 ((uint32_t)0x00200000)
+#define RTC_CR_OSEL_1 ((uint32_t)0x00400000)
+#define RTC_CR_POL ((uint32_t)0x00100000)
+#define RTC_CR_COSEL ((uint32_t)0x00080000)
+#define RTC_CR_BCK ((uint32_t)0x00040000)
+#define RTC_CR_SUB1H ((uint32_t)0x00020000)
+#define RTC_CR_ADD1H ((uint32_t)0x00010000)
+#define RTC_CR_TSIE ((uint32_t)0x00008000)
+#define RTC_CR_ALRAIE ((uint32_t)0x00001000)
+#define RTC_CR_TSE ((uint32_t)0x00000800)
+#define RTC_CR_ALRAE ((uint32_t)0x00000100)
+#define RTC_CR_FMT ((uint32_t)0x00000040)
+#define RTC_CR_BYPSHAD ((uint32_t)0x00000020)
+#define RTC_CR_REFCKON ((uint32_t)0x00000010)
+#define RTC_CR_TSEDGE ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_ISR register *****************/
+#define RTC_ISR_RECALPF ((uint32_t)0x00010000)
+#define RTC_ISR_TAMP2F ((uint32_t)0x00004000)
+#define RTC_ISR_TAMP1F ((uint32_t)0x00002000)
+#define RTC_ISR_TSOVF ((uint32_t)0x00001000)
+#define RTC_ISR_TSF ((uint32_t)0x00000800)
+#define RTC_ISR_ALRAF ((uint32_t)0x00000100)
+#define RTC_ISR_INIT ((uint32_t)0x00000080)
+#define RTC_ISR_INITF ((uint32_t)0x00000040)
+#define RTC_ISR_RSF ((uint32_t)0x00000020)
+#define RTC_ISR_INITS ((uint32_t)0x00000010)
+#define RTC_ISR_SHPF ((uint32_t)0x00000008)
+#define RTC_ISR_ALRAWF ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_PRER register ****************/
+#define RTC_PRER_PREDIV_A ((uint32_t)0x007F0000)
+#define RTC_PRER_PREDIV_S ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_ALRMAR register **************/
+#define RTC_ALRMAR_MSK4 ((uint32_t)0x80000000)
+#define RTC_ALRMAR_WDSEL ((uint32_t)0x40000000)
+#define RTC_ALRMAR_DT ((uint32_t)0x30000000)
+#define RTC_ALRMAR_DT_0 ((uint32_t)0x10000000)
+#define RTC_ALRMAR_DT_1 ((uint32_t)0x20000000)
+#define RTC_ALRMAR_DU ((uint32_t)0x0F000000)
+#define RTC_ALRMAR_DU_0 ((uint32_t)0x01000000)
+#define RTC_ALRMAR_DU_1 ((uint32_t)0x02000000)
+#define RTC_ALRMAR_DU_2 ((uint32_t)0x04000000)
+#define RTC_ALRMAR_DU_3 ((uint32_t)0x08000000)
+#define RTC_ALRMAR_MSK3 ((uint32_t)0x00800000)
+#define RTC_ALRMAR_PM ((uint32_t)0x00400000)
+#define RTC_ALRMAR_HT ((uint32_t)0x00300000)
+#define RTC_ALRMAR_HT_0 ((uint32_t)0x00100000)
+#define RTC_ALRMAR_HT_1 ((uint32_t)0x00200000)
+#define RTC_ALRMAR_HU ((uint32_t)0x000F0000)
+#define RTC_ALRMAR_HU_0 ((uint32_t)0x00010000)
+#define RTC_ALRMAR_HU_1 ((uint32_t)0x00020000)
+#define RTC_ALRMAR_HU_2 ((uint32_t)0x00040000)
+#define RTC_ALRMAR_HU_3 ((uint32_t)0x00080000)
+#define RTC_ALRMAR_MSK2 ((uint32_t)0x00008000)
+#define RTC_ALRMAR_MNT ((uint32_t)0x00007000)
+#define RTC_ALRMAR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_ALRMAR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_ALRMAR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_ALRMAR_MNU ((uint32_t)0x00000F00)
+#define RTC_ALRMAR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_ALRMAR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_ALRMAR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_ALRMAR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_ALRMAR_MSK1 ((uint32_t)0x00000080)
+#define RTC_ALRMAR_ST ((uint32_t)0x00000070)
+#define RTC_ALRMAR_ST_0 ((uint32_t)0x00000010)
+#define RTC_ALRMAR_ST_1 ((uint32_t)0x00000020)
+#define RTC_ALRMAR_ST_2 ((uint32_t)0x00000040)
+#define RTC_ALRMAR_SU ((uint32_t)0x0000000F)
+#define RTC_ALRMAR_SU_0 ((uint32_t)0x00000001)
+#define RTC_ALRMAR_SU_1 ((uint32_t)0x00000002)
+#define RTC_ALRMAR_SU_2 ((uint32_t)0x00000004)
+#define RTC_ALRMAR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_WPR register *****************/
+#define RTC_WPR_KEY ((uint32_t)0x000000FF)
+
+/******************** Bits definition for RTC_SSR register *****************/
+#define RTC_SSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_SHIFTR register **************/
+#define RTC_SHIFTR_SUBFS ((uint32_t)0x00007FFF)
+#define RTC_SHIFTR_ADD1S ((uint32_t)0x80000000)
+
+/******************** Bits definition for RTC_TSTR register ****************/
+#define RTC_TSTR_PM ((uint32_t)0x00400000)
+#define RTC_TSTR_HT ((uint32_t)0x00300000)
+#define RTC_TSTR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TSTR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TSTR_HU ((uint32_t)0x000F0000)
+#define RTC_TSTR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TSTR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TSTR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TSTR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TSTR_MNT ((uint32_t)0x00007000)
+#define RTC_TSTR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TSTR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TSTR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TSTR_MNU ((uint32_t)0x00000F00)
+#define RTC_TSTR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TSTR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TSTR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TSTR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TSTR_ST ((uint32_t)0x00000070)
+#define RTC_TSTR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TSTR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TSTR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TSTR_SU ((uint32_t)0x0000000F)
+#define RTC_TSTR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TSTR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TSTR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TSTR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSDR register ****************/
+#define RTC_TSDR_WDU ((uint32_t)0x0000E000)
+#define RTC_TSDR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_TSDR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_TSDR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_TSDR_MT ((uint32_t)0x00001000)
+#define RTC_TSDR_MU ((uint32_t)0x00000F00)
+#define RTC_TSDR_MU_0 ((uint32_t)0x00000100)
+#define RTC_TSDR_MU_1 ((uint32_t)0x00000200)
+#define RTC_TSDR_MU_2 ((uint32_t)0x00000400)
+#define RTC_TSDR_MU_3 ((uint32_t)0x00000800)
+#define RTC_TSDR_DT ((uint32_t)0x00000030)
+#define RTC_TSDR_DT_0 ((uint32_t)0x00000010)
+#define RTC_TSDR_DT_1 ((uint32_t)0x00000020)
+#define RTC_TSDR_DU ((uint32_t)0x0000000F)
+#define RTC_TSDR_DU_0 ((uint32_t)0x00000001)
+#define RTC_TSDR_DU_1 ((uint32_t)0x00000002)
+#define RTC_TSDR_DU_2 ((uint32_t)0x00000004)
+#define RTC_TSDR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSSSR register ***************/
+#define RTC_TSSSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_CALR register ****************/
+#define RTC_CALR_CALP ((uint32_t)0x00008000)
+#define RTC_CALR_CALW8 ((uint32_t)0x00004000)
+#define RTC_CALR_CALW16 ((uint32_t)0x00002000)
+#define RTC_CALR_CALM ((uint32_t)0x000001FF)
+#define RTC_CALR_CALM_0 ((uint32_t)0x00000001)
+#define RTC_CALR_CALM_1 ((uint32_t)0x00000002)
+#define RTC_CALR_CALM_2 ((uint32_t)0x00000004)
+#define RTC_CALR_CALM_3 ((uint32_t)0x00000008)
+#define RTC_CALR_CALM_4 ((uint32_t)0x00000010)
+#define RTC_CALR_CALM_5 ((uint32_t)0x00000020)
+#define RTC_CALR_CALM_6 ((uint32_t)0x00000040)
+#define RTC_CALR_CALM_7 ((uint32_t)0x00000080)
+#define RTC_CALR_CALM_8 ((uint32_t)0x00000100)
+
+/******************** Bits definition for RTC_TAFCR register ***************/
+#define RTC_TAFCR_ALARMOUTTYPE ((uint32_t)0x00040000)
+#define RTC_TAFCR_TAMPPUDIS ((uint32_t)0x00008000)
+#define RTC_TAFCR_TAMPPRCH ((uint32_t)0x00006000)
+#define RTC_TAFCR_TAMPPRCH_0 ((uint32_t)0x00002000)
+#define RTC_TAFCR_TAMPPRCH_1 ((uint32_t)0x00004000)
+#define RTC_TAFCR_TAMPFLT ((uint32_t)0x00001800)
+#define RTC_TAFCR_TAMPFLT_0 ((uint32_t)0x00000800)
+#define RTC_TAFCR_TAMPFLT_1 ((uint32_t)0x00001000)
+#define RTC_TAFCR_TAMPFREQ ((uint32_t)0x00000700)
+#define RTC_TAFCR_TAMPFREQ_0 ((uint32_t)0x00000100)
+#define RTC_TAFCR_TAMPFREQ_1 ((uint32_t)0x00000200)
+#define RTC_TAFCR_TAMPFREQ_2 ((uint32_t)0x00000400)
+#define RTC_TAFCR_TAMPTS ((uint32_t)0x00000080)
+#define RTC_TAFCR_TAMP2TRG ((uint32_t)0x00000010)
+#define RTC_TAFCR_TAMP2E ((uint32_t)0x00000008)
+#define RTC_TAFCR_TAMPIE ((uint32_t)0x00000004)
+#define RTC_TAFCR_TAMP1TRG ((uint32_t)0x00000002)
+#define RTC_TAFCR_TAMP1E ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_ALRMASSR register ************/
+#define RTC_ALRMASSR_MASKSS ((uint32_t)0x0F000000)
+#define RTC_ALRMASSR_MASKSS_0 ((uint32_t)0x01000000)
+#define RTC_ALRMASSR_MASKSS_1 ((uint32_t)0x02000000)
+#define RTC_ALRMASSR_MASKSS_2 ((uint32_t)0x04000000)
+#define RTC_ALRMASSR_MASKSS_3 ((uint32_t)0x08000000)
+#define RTC_ALRMASSR_SS ((uint32_t)0x00007FFF)
+
+/*****************************************************************************/
+/* */
+/* Serial Peripheral Interface (SPI) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for SPI_CR1 register *******************/
+#define SPI_CR1_CPHA ((uint32_t)0x00000001) /*!< Clock Phase */
+#define SPI_CR1_CPOL ((uint32_t)0x00000002) /*!< Clock Polarity */
+#define SPI_CR1_MSTR ((uint32_t)0x00000004) /*!< Master Selection */
+#define SPI_CR1_BR ((uint32_t)0x00000038) /*!< BR[2:0] bits (Baud Rate Control) */
+#define SPI_CR1_BR_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define SPI_CR1_BR_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define SPI_CR1_BR_2 ((uint32_t)0x00000020) /*!< Bit 2 */
+#define SPI_CR1_SPE ((uint32_t)0x00000040) /*!< SPI Enable */
+#define SPI_CR1_LSBFIRST ((uint32_t)0x00000080) /*!< Frame Format */
+#define SPI_CR1_SSI ((uint32_t)0x00000100) /*!< Internal slave select */
+#define SPI_CR1_SSM ((uint32_t)0x00000200) /*!< Software slave management */
+#define SPI_CR1_RXONLY ((uint32_t)0x00000400) /*!< Receive only */
+#define SPI_CR1_CRCL ((uint32_t)0x00000800) /*!< CRC Length */
+#define SPI_CR1_CRCNEXT ((uint32_t)0x00001000) /*!< Transmit CRC next */
+#define SPI_CR1_CRCEN ((uint32_t)0x00002000) /*!< Hardware CRC calculation enable */
+#define SPI_CR1_BIDIOE ((uint32_t)0x00004000) /*!< Output enable in bidirectional mode */
+#define SPI_CR1_BIDIMODE ((uint32_t)0x00008000) /*!< Bidirectional data mode enable */
+
+/******************* Bit definition for SPI_CR2 register *******************/
+#define SPI_CR2_RXDMAEN ((uint32_t)0x00000001) /*!< Rx Buffer DMA Enable */
+#define SPI_CR2_TXDMAEN ((uint32_t)0x00000002) /*!< Tx Buffer DMA Enable */
+#define SPI_CR2_SSOE ((uint32_t)0x00000004) /*!< SS Output Enable */
+#define SPI_CR2_NSSP ((uint32_t)0x00000008) /*!< NSS pulse management Enable */
+#define SPI_CR2_FRF ((uint32_t)0x00000010) /*!< Frame Format Enable */
+#define SPI_CR2_ERRIE ((uint32_t)0x00000020) /*!< Error Interrupt Enable */
+#define SPI_CR2_RXNEIE ((uint32_t)0x00000040) /*!< RX buffer Not Empty Interrupt Enable */
+#define SPI_CR2_TXEIE ((uint32_t)0x00000080) /*!< Tx buffer Empty Interrupt Enable */
+#define SPI_CR2_DS ((uint32_t)0x00000F00) /*!< DS[3:0] Data Size */
+#define SPI_CR2_DS_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define SPI_CR2_DS_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define SPI_CR2_DS_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define SPI_CR2_DS_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+#define SPI_CR2_FRXTH ((uint32_t)0x00001000) /*!< FIFO reception Threshold */
+#define SPI_CR2_LDMARX ((uint32_t)0x00002000) /*!< Last DMA transfer for reception */
+#define SPI_CR2_LDMATX ((uint32_t)0x00004000) /*!< Last DMA transfer for transmission */
+
+/******************** Bit definition for SPI_SR register *******************/
+#define SPI_SR_RXNE ((uint32_t)0x00000001) /*!< Receive buffer Not Empty */
+#define SPI_SR_TXE ((uint32_t)0x00000002) /*!< Transmit buffer Empty */
+#define SPI_SR_CRCERR ((uint32_t)0x00000010) /*!< CRC Error flag */
+#define SPI_SR_MODF ((uint32_t)0x00000020) /*!< Mode fault */
+#define SPI_SR_OVR ((uint32_t)0x00000040) /*!< Overrun flag */
+#define SPI_SR_BSY ((uint32_t)0x00000080) /*!< Busy flag */
+#define SPI_SR_FRE ((uint32_t)0x00000100) /*!< TI frame format error */
+#define SPI_SR_FRLVL ((uint32_t)0x00000600) /*!< FIFO Reception Level */
+#define SPI_SR_FRLVL_0 ((uint32_t)0x00000200) /*!< Bit 0 */
+#define SPI_SR_FRLVL_1 ((uint32_t)0x00000400) /*!< Bit 1 */
+#define SPI_SR_FTLVL ((uint32_t)0x00001800) /*!< FIFO Transmission Level */
+#define SPI_SR_FTLVL_0 ((uint32_t)0x00000800) /*!< Bit 0 */
+#define SPI_SR_FTLVL_1 ((uint32_t)0x00001000) /*!< Bit 1 */
+
+/******************** Bit definition for SPI_DR register *******************/
+#define SPI_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data Register */
+
+/******************* Bit definition for SPI_CRCPR register *****************/
+#define SPI_CRCPR_CRCPOLY ((uint32_t)0xFFFFFFFF) /*!< CRC polynomial register */
+
+/****************** Bit definition for SPI_RXCRCR register *****************/
+#define SPI_RXCRCR_RXCRC ((uint32_t)0xFFFFFFFF) /*!< Rx CRC Register */
+
+/****************** Bit definition for SPI_TXCRCR register *****************/
+#define SPI_TXCRCR_TXCRC ((uint32_t)0xFFFFFFFF) /*!< Tx CRC Register */
+
+/****************** Bit definition for SPI_I2SCFGR register ****************/
+#define SPI_I2SCFGR_I2SMOD ((uint32_t)0x00000800) /*!< Keep for compatibility */
+
+/*****************************************************************************/
+/* */
+/* System Configuration (SYSCFG) */
+/* */
+/*****************************************************************************/
+/***************** Bit definition for SYSCFG_CFGR1 register ****************/
+#define SYSCFG_CFGR1_MEM_MODE ((uint32_t)0x00000003) /*!< SYSCFG_Memory Remap Config */
+#define SYSCFG_CFGR1_MEM_MODE_0 ((uint32_t)0x00000001) /*!< SYSCFG_Memory Remap Config Bit 0 */
+#define SYSCFG_CFGR1_MEM_MODE_1 ((uint32_t)0x00000002) /*!< SYSCFG_Memory Remap Config Bit 1 */
+
+#define SYSCFG_CFGR1_PA11_PA12_RMP ((uint32_t)0x00000010) /*!< PA11 and PA12 remap on QFN28 and TSSOP20 packages */
+
+#define SYSCFG_CFGR1_DMA_RMP ((uint32_t)0x00001F00) /*!< DMA remap mask */
+#define SYSCFG_CFGR1_ADC_DMA_RMP ((uint32_t)0x00000100) /*!< ADC DMA remap */
+#define SYSCFG_CFGR1_USART1TX_DMA_RMP ((uint32_t)0x00000200) /*!< USART1 TX DMA remap */
+#define SYSCFG_CFGR1_USART1RX_DMA_RMP ((uint32_t)0x00000400) /*!< USART1 RX DMA remap */
+#define SYSCFG_CFGR1_TIM16_DMA_RMP ((uint32_t)0x00000800) /*!< Timer 16 DMA remap */
+#define SYSCFG_CFGR1_TIM17_DMA_RMP ((uint32_t)0x00001000) /*!< Timer 17 DMA remap */
+
+#define SYSCFG_CFGR1_I2C_FMP_PB6 ((uint32_t)0x00010000) /*!< I2C PB6 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB7 ((uint32_t)0x00020000) /*!< I2C PB7 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB8 ((uint32_t)0x00040000) /*!< I2C PB8 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB9 ((uint32_t)0x00080000) /*!< I2C PB9 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_I2C1 ((uint32_t)0x00100000) /*!< Enable Fast Mode Plus on PB10, PB11, PF6 and PF7 */
+#define SYSCFG_CFGR1_I2C_FMP_PA9 ((uint32_t)0x00400000) /*!< I2C PA9 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PA10 ((uint32_t)0x00800000) /*!< I2C PA10 Fast mode plus */
+
+/***************** Bit definition for SYSCFG_EXTICR1 register **************/
+#define SYSCFG_EXTICR1_EXTI0 ((uint16_t)0x000F) /*!< EXTI 0 configuration */
+#define SYSCFG_EXTICR1_EXTI1 ((uint16_t)0x00F0) /*!< EXTI 1 configuration */
+#define SYSCFG_EXTICR1_EXTI2 ((uint16_t)0x0F00) /*!< EXTI 2 configuration */
+#define SYSCFG_EXTICR1_EXTI3 ((uint16_t)0xF000) /*!< EXTI 3 configuration */
+
+/**
+ * @brief EXTI0 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI0_PA ((uint16_t)0x0000) /*!< PA[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PB ((uint16_t)0x0001) /*!< PB[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PC ((uint16_t)0x0002) /*!< PC[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PD ((uint16_t)0x0003) /*!< PD[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PF ((uint16_t)0x0005) /*!< PF[0] pin */
+
+/**
+ * @brief EXTI1 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI1_PA ((uint16_t)0x0000) /*!< PA[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PB ((uint16_t)0x0010) /*!< PB[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PC ((uint16_t)0x0020) /*!< PC[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PD ((uint16_t)0x0030) /*!< PD[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PF ((uint16_t)0x0050) /*!< PF[1] pin */
+
+/**
+ * @brief EXTI2 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI2_PA ((uint16_t)0x0000) /*!< PA[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PB ((uint16_t)0x0100) /*!< PB[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PC ((uint16_t)0x0200) /*!< PC[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PD ((uint16_t)0x0300) /*!< PD[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PF ((uint16_t)0x0500) /*!< PF[2] pin */
+
+/**
+ * @brief EXTI3 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI3_PA ((uint16_t)0x0000) /*!< PA[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PB ((uint16_t)0x1000) /*!< PB[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PC ((uint16_t)0x2000) /*!< PC[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PD ((uint16_t)0x3000) /*!< PD[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PF ((uint16_t)0x5000) /*!< PF[3] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR2 register **************/
+#define SYSCFG_EXTICR2_EXTI4 ((uint16_t)0x000F) /*!< EXTI 4 configuration */
+#define SYSCFG_EXTICR2_EXTI5 ((uint16_t)0x00F0) /*!< EXTI 5 configuration */
+#define SYSCFG_EXTICR2_EXTI6 ((uint16_t)0x0F00) /*!< EXTI 6 configuration */
+#define SYSCFG_EXTICR2_EXTI7 ((uint16_t)0xF000) /*!< EXTI 7 configuration */
+
+/**
+ * @brief EXTI4 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI4_PA ((uint16_t)0x0000) /*!< PA[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PB ((uint16_t)0x0001) /*!< PB[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PC ((uint16_t)0x0002) /*!< PC[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PD ((uint16_t)0x0003) /*!< PD[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PF ((uint16_t)0x0005) /*!< PF[4] pin */
+
+/**
+ * @brief EXTI5 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI5_PA ((uint16_t)0x0000) /*!< PA[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PB ((uint16_t)0x0010) /*!< PB[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PC ((uint16_t)0x0020) /*!< PC[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PD ((uint16_t)0x0030) /*!< PD[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PF ((uint16_t)0x0050) /*!< PF[5] pin */
+
+/**
+ * @brief EXTI6 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI6_PA ((uint16_t)0x0000) /*!< PA[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PB ((uint16_t)0x0100) /*!< PB[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PC ((uint16_t)0x0200) /*!< PC[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PD ((uint16_t)0x0300) /*!< PD[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PF ((uint16_t)0x0500) /*!< PF[6] pin */
+
+/**
+ * @brief EXTI7 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI7_PA ((uint16_t)0x0000) /*!< PA[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PB ((uint16_t)0x1000) /*!< PB[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PC ((uint16_t)0x2000) /*!< PC[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PD ((uint16_t)0x3000) /*!< PD[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PF ((uint16_t)0x5000) /*!< PF[7] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR3 register **************/
+#define SYSCFG_EXTICR3_EXTI8 ((uint16_t)0x000F) /*!< EXTI 8 configuration */
+#define SYSCFG_EXTICR3_EXTI9 ((uint16_t)0x00F0) /*!< EXTI 9 configuration */
+#define SYSCFG_EXTICR3_EXTI10 ((uint16_t)0x0F00) /*!< EXTI 10 configuration */
+#define SYSCFG_EXTICR3_EXTI11 ((uint16_t)0xF000) /*!< EXTI 11 configuration */
+
+/**
+ * @brief EXTI8 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI8_PA ((uint16_t)0x0000) /*!< PA[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PB ((uint16_t)0x0001) /*!< PB[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PC ((uint16_t)0x0002) /*!< PC[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PD ((uint16_t)0x0003) /*!< PD[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PF ((uint16_t)0x0005) /*!< PF[8] pin */
+
+/**
+ * @brief EXTI9 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI9_PA ((uint16_t)0x0000) /*!< PA[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PB ((uint16_t)0x0010) /*!< PB[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PC ((uint16_t)0x0020) /*!< PC[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PD ((uint16_t)0x0030) /*!< PD[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PF ((uint16_t)0x0050) /*!< PF[9] pin */
+
+/**
+ * @brief EXTI10 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI10_PA ((uint16_t)0x0000) /*!< PA[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PB ((uint16_t)0x0100) /*!< PB[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PC ((uint16_t)0x0200) /*!< PC[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PD ((uint16_t)0x0300) /*!< PD[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PF ((uint16_t)0x0500) /*!< PF[10] pin */
+
+/**
+ * @brief EXTI11 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI11_PA ((uint16_t)0x0000) /*!< PA[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PB ((uint16_t)0x1000) /*!< PB[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PC ((uint16_t)0x2000) /*!< PC[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PD ((uint16_t)0x3000) /*!< PD[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PF ((uint16_t)0x5000) /*!< PF[11] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR4 register **************/
+#define SYSCFG_EXTICR4_EXTI12 ((uint16_t)0x000F) /*!< EXTI 12 configuration */
+#define SYSCFG_EXTICR4_EXTI13 ((uint16_t)0x00F0) /*!< EXTI 13 configuration */
+#define SYSCFG_EXTICR4_EXTI14 ((uint16_t)0x0F00) /*!< EXTI 14 configuration */
+#define SYSCFG_EXTICR4_EXTI15 ((uint16_t)0xF000) /*!< EXTI 15 configuration */
+
+/**
+ * @brief EXTI12 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI12_PA ((uint16_t)0x0000) /*!< PA[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PB ((uint16_t)0x0001) /*!< PB[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PC ((uint16_t)0x0002) /*!< PC[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PD ((uint16_t)0x0003) /*!< PD[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PF ((uint16_t)0x0005) /*!< PF[12] pin */
+
+/**
+ * @brief EXTI13 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI13_PA ((uint16_t)0x0000) /*!< PA[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PB ((uint16_t)0x0010) /*!< PB[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PC ((uint16_t)0x0020) /*!< PC[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PD ((uint16_t)0x0030) /*!< PD[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PF ((uint16_t)0x0050) /*!< PF[13] pin */
+
+/**
+ * @brief EXTI14 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI14_PA ((uint16_t)0x0000) /*!< PA[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PB ((uint16_t)0x0100) /*!< PB[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PC ((uint16_t)0x0200) /*!< PC[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PD ((uint16_t)0x0300) /*!< PD[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PF ((uint16_t)0x0500) /*!< PF[14] pin */
+
+/**
+ * @brief EXTI15 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI15_PA ((uint16_t)0x0000) /*!< PA[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PB ((uint16_t)0x1000) /*!< PB[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PC ((uint16_t)0x2000) /*!< PC[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PD ((uint16_t)0x3000) /*!< PD[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PF ((uint16_t)0x5000) /*!< PF[15] pin */
+
+/***************** Bit definition for SYSCFG_CFGR2 register ****************/
+#define SYSCFG_CFGR2_LOCKUP_LOCK ((uint32_t)0x00000001) /*!< Enables and locks the LOCKUP (Hardfault) output of CortexM0 with Break Input of TIMER1 */
+#define SYSCFG_CFGR2_SRAM_PARITY_LOCK ((uint32_t)0x00000002) /*!< Enables and locks the SRAM_PARITY error signal with Break Input of TIMER1 */
+#define SYSCFG_CFGR2_SRAM_PEF ((uint32_t)0x00000100) /*!< SRAM Parity error flag */
+#define SYSCFG_CFGR2_SRAM_PE SYSCFG_CFGR2_SRAM_PEF /*!< SRAM Parity error flag (define maintained for legacy purpose) */
+
+/*****************************************************************************/
+/* */
+/* Timers (TIM) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for TIM_CR1 register *******************/
+#define TIM_CR1_CEN ((uint32_t)0x00000001) /*!<Counter enable */
+#define TIM_CR1_UDIS ((uint32_t)0x00000002) /*!<Update disable */
+#define TIM_CR1_URS ((uint32_t)0x00000004) /*!<Update request source */
+#define TIM_CR1_OPM ((uint32_t)0x00000008) /*!<One pulse mode */
+#define TIM_CR1_DIR ((uint32_t)0x00000010) /*!<Direction */
+
+#define TIM_CR1_CMS ((uint32_t)0x00000060) /*!<CMS[1:0] bits (Center-aligned mode selection) */
+#define TIM_CR1_CMS_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define TIM_CR1_CMS_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+
+#define TIM_CR1_ARPE ((uint32_t)0x00000080) /*!<Auto-reload preload enable */
+
+#define TIM_CR1_CKD ((uint32_t)0x00000300) /*!<CKD[1:0] bits (clock division) */
+#define TIM_CR1_CKD_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CR1_CKD_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+/******************* Bit definition for TIM_CR2 register *******************/
+#define TIM_CR2_CCPC ((uint32_t)0x00000001) /*!<Capture/Compare Preloaded Control */
+#define TIM_CR2_CCUS ((uint32_t)0x00000004) /*!<Capture/Compare Control Update Selection */
+#define TIM_CR2_CCDS ((uint32_t)0x00000008) /*!<Capture/Compare DMA Selection */
+
+#define TIM_CR2_MMS ((uint32_t)0x00000070) /*!<MMS[2:0] bits (Master Mode Selection) */
+#define TIM_CR2_MMS_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CR2_MMS_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CR2_MMS_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CR2_TI1S ((uint32_t)0x00000080) /*!<TI1 Selection */
+#define TIM_CR2_OIS1 ((uint32_t)0x00000100) /*!<Output Idle state 1 (OC1 output) */
+#define TIM_CR2_OIS1N ((uint32_t)0x00000200) /*!<Output Idle state 1 (OC1N output) */
+#define TIM_CR2_OIS2 ((uint32_t)0x00000400) /*!<Output Idle state 2 (OC2 output) */
+#define TIM_CR2_OIS2N ((uint32_t)0x00000800) /*!<Output Idle state 2 (OC2N output) */
+#define TIM_CR2_OIS3 ((uint32_t)0x00001000) /*!<Output Idle state 3 (OC3 output) */
+#define TIM_CR2_OIS3N ((uint32_t)0x00002000) /*!<Output Idle state 3 (OC3N output) */
+#define TIM_CR2_OIS4 ((uint32_t)0x00004000) /*!<Output Idle state 4 (OC4 output) */
+
+/******************* Bit definition for TIM_SMCR register ******************/
+#define TIM_SMCR_SMS ((uint32_t)0x00000007) /*!<SMS[2:0] bits (Slave mode selection) */
+#define TIM_SMCR_SMS_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_SMCR_SMS_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_SMCR_SMS_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+
+#define TIM_SMCR_OCCS ((uint32_t)0x00000008) /*!< OCREF clear selection */
+
+#define TIM_SMCR_TS ((uint32_t)0x00000070) /*!<TS[2:0] bits (Trigger selection) */
+#define TIM_SMCR_TS_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_SMCR_TS_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_SMCR_TS_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_SMCR_MSM ((uint32_t)0x00000080) /*!<Master/slave mode */
+
+#define TIM_SMCR_ETF ((uint32_t)0x00000F00) /*!<ETF[3:0] bits (External trigger filter) */
+#define TIM_SMCR_ETF_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_SMCR_ETF_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define TIM_SMCR_ETF_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define TIM_SMCR_ETF_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+
+#define TIM_SMCR_ETPS ((uint32_t)0x00003000) /*!<ETPS[1:0] bits (External trigger prescaler) */
+#define TIM_SMCR_ETPS_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_SMCR_ETPS_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+
+#define TIM_SMCR_ECE ((uint32_t)0x00004000) /*!<External clock enable */
+#define TIM_SMCR_ETP ((uint32_t)0x00008000) /*!<External trigger polarity */
+
+/******************* Bit definition for TIM_DIER register ******************/
+#define TIM_DIER_UIE ((uint32_t)0x00000001) /*!<Update interrupt enable */
+#define TIM_DIER_CC1IE ((uint32_t)0x00000002) /*!<Capture/Compare 1 interrupt enable */
+#define TIM_DIER_CC2IE ((uint32_t)0x00000004) /*!<Capture/Compare 2 interrupt enable */
+#define TIM_DIER_CC3IE ((uint32_t)0x00000008) /*!<Capture/Compare 3 interrupt enable */
+#define TIM_DIER_CC4IE ((uint32_t)0x00000010) /*!<Capture/Compare 4 interrupt enable */
+#define TIM_DIER_COMIE ((uint32_t)0x00000020) /*!<COM interrupt enable */
+#define TIM_DIER_TIE ((uint32_t)0x00000040) /*!<Trigger interrupt enable */
+#define TIM_DIER_BIE ((uint32_t)0x00000080) /*!<Break interrupt enable */
+#define TIM_DIER_UDE ((uint32_t)0x00000100) /*!<Update DMA request enable */
+#define TIM_DIER_CC1DE ((uint32_t)0x00000200) /*!<Capture/Compare 1 DMA request enable */
+#define TIM_DIER_CC2DE ((uint32_t)0x00000400) /*!<Capture/Compare 2 DMA request enable */
+#define TIM_DIER_CC3DE ((uint32_t)0x00000800) /*!<Capture/Compare 3 DMA request enable */
+#define TIM_DIER_CC4DE ((uint32_t)0x00001000) /*!<Capture/Compare 4 DMA request enable */
+#define TIM_DIER_COMDE ((uint32_t)0x00002000) /*!<COM DMA request enable */
+#define TIM_DIER_TDE ((uint32_t)0x00004000) /*!<Trigger DMA request enable */
+
+/******************** Bit definition for TIM_SR register *******************/
+#define TIM_SR_UIF ((uint32_t)0x00000001) /*!<Update interrupt Flag */
+#define TIM_SR_CC1IF ((uint32_t)0x00000002) /*!<Capture/Compare 1 interrupt Flag */
+#define TIM_SR_CC2IF ((uint32_t)0x00000004) /*!<Capture/Compare 2 interrupt Flag */
+#define TIM_SR_CC3IF ((uint32_t)0x00000008) /*!<Capture/Compare 3 interrupt Flag */
+#define TIM_SR_CC4IF ((uint32_t)0x00000010) /*!<Capture/Compare 4 interrupt Flag */
+#define TIM_SR_COMIF ((uint32_t)0x00000020) /*!<COM interrupt Flag */
+#define TIM_SR_TIF ((uint32_t)0x00000040) /*!<Trigger interrupt Flag */
+#define TIM_SR_BIF ((uint32_t)0x00000080) /*!<Break interrupt Flag */
+#define TIM_SR_CC1OF ((uint32_t)0x00000200) /*!<Capture/Compare 1 Overcapture Flag */
+#define TIM_SR_CC2OF ((uint32_t)0x00000400) /*!<Capture/Compare 2 Overcapture Flag */
+#define TIM_SR_CC3OF ((uint32_t)0x00000800) /*!<Capture/Compare 3 Overcapture Flag */
+#define TIM_SR_CC4OF ((uint32_t)0x00001000) /*!<Capture/Compare 4 Overcapture Flag */
+
+/******************* Bit definition for TIM_EGR register *******************/
+#define TIM_EGR_UG ((uint32_t)0x00000001) /*!<Update Generation */
+#define TIM_EGR_CC1G ((uint32_t)0x00000002) /*!<Capture/Compare 1 Generation */
+#define TIM_EGR_CC2G ((uint32_t)0x00000004) /*!<Capture/Compare 2 Generation */
+#define TIM_EGR_CC3G ((uint32_t)0x00000008) /*!<Capture/Compare 3 Generation */
+#define TIM_EGR_CC4G ((uint32_t)0x00000010) /*!<Capture/Compare 4 Generation */
+#define TIM_EGR_COMG ((uint32_t)0x00000020) /*!<Capture/Compare Control Update Generation */
+#define TIM_EGR_TG ((uint32_t)0x00000040) /*!<Trigger Generation */
+#define TIM_EGR_BG ((uint32_t)0x00000080) /*!<Break Generation */
+
+/****************** Bit definition for TIM_CCMR1 register ******************/
+#define TIM_CCMR1_CC1S ((uint32_t)0x00000003) /*!<CC1S[1:0] bits (Capture/Compare 1 Selection) */
+#define TIM_CCMR1_CC1S_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_CCMR1_CC1S_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC1FE ((uint32_t)0x00000004) /*!<Output Compare 1 Fast enable */
+#define TIM_CCMR1_OC1PE ((uint32_t)0x00000008) /*!<Output Compare 1 Preload enable */
+
+#define TIM_CCMR1_OC1M ((uint32_t)0x00000070) /*!<OC1M[2:0] bits (Output Compare 1 Mode) */
+#define TIM_CCMR1_OC1M_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR1_OC1M_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR1_OC1M_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CCMR1_OC1CE ((uint32_t)0x00000080) /*!<Output Compare 1Clear Enable */
+
+#define TIM_CCMR1_CC2S ((uint32_t)0x00000300) /*!<CC2S[1:0] bits (Capture/Compare 2 Selection) */
+#define TIM_CCMR1_CC2S_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CCMR1_CC2S_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC2FE ((uint32_t)0x00000400) /*!<Output Compare 2 Fast enable */
+#define TIM_CCMR1_OC2PE ((uint32_t)0x00000800) /*!<Output Compare 2 Preload enable */
+
+#define TIM_CCMR1_OC2M ((uint32_t)0x00007000) /*!<OC2M[2:0] bits (Output Compare 2 Mode) */
+#define TIM_CCMR1_OC2M_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR1_OC2M_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR1_OC2M_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+
+#define TIM_CCMR1_OC2CE ((uint32_t)0x00008000) /*!<Output Compare 2 Clear Enable */
+
+/*---------------------------------------------------------------------------*/
+
+#define TIM_CCMR1_IC1PSC ((uint32_t)0x0000000C) /*!<IC1PSC[1:0] bits (Input Capture 1 Prescaler) */
+#define TIM_CCMR1_IC1PSC_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define TIM_CCMR1_IC1PSC_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC1F ((uint32_t)0x000000F0) /*!<IC1F[3:0] bits (Input Capture 1 Filter) */
+#define TIM_CCMR1_IC1F_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR1_IC1F_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR1_IC1F_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define TIM_CCMR1_IC1F_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define TIM_CCMR1_IC2PSC ((uint32_t)0x00000C00) /*!<IC2PSC[1:0] bits (Input Capture 2 Prescaler) */
+#define TIM_CCMR1_IC2PSC_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define TIM_CCMR1_IC2PSC_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC2F ((uint32_t)0x0000F000) /*!<IC2F[3:0] bits (Input Capture 2 Filter) */
+#define TIM_CCMR1_IC2F_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR1_IC2F_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR1_IC2F_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define TIM_CCMR1_IC2F_3 ((uint32_t)0x00008000) /*!<Bit 3 */
+
+/****************** Bit definition for TIM_CCMR2 register ******************/
+#define TIM_CCMR2_CC3S ((uint32_t)0x00000003) /*!<CC3S[1:0] bits (Capture/Compare 3 Selection) */
+#define TIM_CCMR2_CC3S_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_CCMR2_CC3S_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC3FE ((uint32_t)0x00000004) /*!<Output Compare 3 Fast enable */
+#define TIM_CCMR2_OC3PE ((uint32_t)0x00000008) /*!<Output Compare 3 Preload enable */
+
+#define TIM_CCMR2_OC3M ((uint32_t)0x00000070) /*!<OC3M[2:0] bits (Output Compare 3 Mode) */
+#define TIM_CCMR2_OC3M_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR2_OC3M_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR2_OC3M_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CCMR2_OC3CE ((uint32_t)0x00000080) /*!<Output Compare 3 Clear Enable */
+
+#define TIM_CCMR2_CC4S ((uint32_t)0x00000300) /*!<CC4S[1:0] bits (Capture/Compare 4 Selection) */
+#define TIM_CCMR2_CC4S_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CCMR2_CC4S_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC4FE ((uint32_t)0x00000400) /*!<Output Compare 4 Fast enable */
+#define TIM_CCMR2_OC4PE ((uint32_t)0x00000800) /*!<Output Compare 4 Preload enable */
+
+#define TIM_CCMR2_OC4M ((uint32_t)0x00007000) /*!<OC4M[2:0] bits (Output Compare 4 Mode) */
+#define TIM_CCMR2_OC4M_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR2_OC4M_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR2_OC4M_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+
+#define TIM_CCMR2_OC4CE ((uint32_t)0x00008000) /*!<Output Compare 4 Clear Enable */
+
+/*---------------------------------------------------------------------------*/
+
+#define TIM_CCMR2_IC3PSC ((uint32_t)0x0000000C) /*!<IC3PSC[1:0] bits (Input Capture 3 Prescaler) */
+#define TIM_CCMR2_IC3PSC_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define TIM_CCMR2_IC3PSC_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC3F ((uint32_t)0x000000F0) /*!<IC3F[3:0] bits (Input Capture 3 Filter) */
+#define TIM_CCMR2_IC3F_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR2_IC3F_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR2_IC3F_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define TIM_CCMR2_IC3F_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define TIM_CCMR2_IC4PSC ((uint32_t)0x00000C00) /*!<IC4PSC[1:0] bits (Input Capture 4 Prescaler) */
+#define TIM_CCMR2_IC4PSC_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define TIM_CCMR2_IC4PSC_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC4F ((uint32_t)0x0000F000) /*!<IC4F[3:0] bits (Input Capture 4 Filter) */
+#define TIM_CCMR2_IC4F_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR2_IC4F_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR2_IC4F_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define TIM_CCMR2_IC4F_3 ((uint32_t)0x00008000) /*!<Bit 3 */
+
+/******************* Bit definition for TIM_CCER register ******************/
+#define TIM_CCER_CC1E ((uint32_t)0x00000001) /*!<Capture/Compare 1 output enable */
+#define TIM_CCER_CC1P ((uint32_t)0x00000002) /*!<Capture/Compare 1 output Polarity */
+#define TIM_CCER_CC1NE ((uint32_t)0x00000004) /*!<Capture/Compare 1 Complementary output enable */
+#define TIM_CCER_CC1NP ((uint32_t)0x00000008) /*!<Capture/Compare 1 Complementary output Polarity */
+#define TIM_CCER_CC2E ((uint32_t)0x00000010) /*!<Capture/Compare 2 output enable */
+#define TIM_CCER_CC2P ((uint32_t)0x00000020) /*!<Capture/Compare 2 output Polarity */
+#define TIM_CCER_CC2NE ((uint32_t)0x00000040) /*!<Capture/Compare 2 Complementary output enable */
+#define TIM_CCER_CC2NP ((uint32_t)0x00000080) /*!<Capture/Compare 2 Complementary output Polarity */
+#define TIM_CCER_CC3E ((uint32_t)0x00000100) /*!<Capture/Compare 3 output enable */
+#define TIM_CCER_CC3P ((uint32_t)0x00000200) /*!<Capture/Compare 3 output Polarity */
+#define TIM_CCER_CC3NE ((uint32_t)0x00000400) /*!<Capture/Compare 3 Complementary output enable */
+#define TIM_CCER_CC3NP ((uint32_t)0x00000800) /*!<Capture/Compare 3 Complementary output Polarity */
+#define TIM_CCER_CC4E ((uint32_t)0x00001000) /*!<Capture/Compare 4 output enable */
+#define TIM_CCER_CC4P ((uint32_t)0x00002000) /*!<Capture/Compare 4 output Polarity */
+#define TIM_CCER_CC4NP ((uint32_t)0x00008000) /*!<Capture/Compare 4 Complementary output Polarity */
+
+/******************* Bit definition for TIM_CNT register *******************/
+#define TIM_CNT_CNT ((uint32_t)0xFFFFFFFF) /*!<Counter Value */
+
+/******************* Bit definition for TIM_PSC register *******************/
+#define TIM_PSC_PSC ((uint32_t)0x0000FFFF) /*!<Prescaler Value */
+
+/******************* Bit definition for TIM_ARR register *******************/
+#define TIM_ARR_ARR ((uint32_t)0xFFFFFFFF) /*!<actual auto-reload Value */
+
+/******************* Bit definition for TIM_RCR register *******************/
+#define TIM_RCR_REP ((uint32_t)0x000000FF) /*!<Repetition Counter Value */
+
+/******************* Bit definition for TIM_CCR1 register ******************/
+#define TIM_CCR1_CCR1 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 1 Value */
+
+/******************* Bit definition for TIM_CCR2 register ******************/
+#define TIM_CCR2_CCR2 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 2 Value */
+
+/******************* Bit definition for TIM_CCR3 register ******************/
+#define TIM_CCR3_CCR3 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 3 Value */
+
+/******************* Bit definition for TIM_CCR4 register ******************/
+#define TIM_CCR4_CCR4 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 4 Value */
+
+/******************* Bit definition for TIM_BDTR register ******************/
+#define TIM_BDTR_DTG ((uint32_t)0x000000FF) /*!<DTG[0:7] bits (Dead-Time Generator set-up) */
+#define TIM_BDTR_DTG_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_BDTR_DTG_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_BDTR_DTG_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define TIM_BDTR_DTG_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define TIM_BDTR_DTG_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define TIM_BDTR_DTG_5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define TIM_BDTR_DTG_6 ((uint32_t)0x00000040) /*!<Bit 6 */
+#define TIM_BDTR_DTG_7 ((uint32_t)0x00000080) /*!<Bit 7 */
+
+#define TIM_BDTR_LOCK ((uint32_t)0x00000300) /*!<LOCK[1:0] bits (Lock Configuration) */
+#define TIM_BDTR_LOCK_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_BDTR_LOCK_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_BDTR_OSSI ((uint32_t)0x00000400) /*!<Off-State Selection for Idle mode */
+#define TIM_BDTR_OSSR ((uint32_t)0x00000800) /*!<Off-State Selection for Run mode */
+#define TIM_BDTR_BKE ((uint32_t)0x00001000) /*!<Break enable */
+#define TIM_BDTR_BKP ((uint32_t)0x00002000) /*!<Break Polarity */
+#define TIM_BDTR_AOE ((uint32_t)0x00004000) /*!<Automatic Output enable */
+#define TIM_BDTR_MOE ((uint32_t)0x00008000) /*!<Main Output enable */
+
+/******************* Bit definition for TIM_DCR register *******************/
+#define TIM_DCR_DBA ((uint32_t)0x0000001F) /*!<DBA[4:0] bits (DMA Base Address) */
+#define TIM_DCR_DBA_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_DCR_DBA_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_DCR_DBA_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define TIM_DCR_DBA_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define TIM_DCR_DBA_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+
+#define TIM_DCR_DBL ((uint32_t)0x00001F00) /*!<DBL[4:0] bits (DMA Burst Length) */
+#define TIM_DCR_DBL_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_DCR_DBL_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define TIM_DCR_DBL_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define TIM_DCR_DBL_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define TIM_DCR_DBL_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+
+/******************* Bit definition for TIM_DMAR register ******************/
+#define TIM_DMAR_DMAB ((uint32_t)0x0000FFFF) /*!<DMA register for burst accesses */
+
+/******************* Bit definition for TIM14_OR register ********************/
+#define TIM14_OR_TI1_RMP ((uint32_t)0x00000003) /*!<TI1_RMP[1:0] bits (TIM14 Input 4 remap) */
+#define TIM14_OR_TI1_RMP_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM14_OR_TI1_RMP_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+/******************************************************************************/
+/* */
+/* Universal Synchronous Asynchronous Receiver Transmitter (USART) */
+/* */
+/******************************************************************************/
+/****************** Bit definition for USART_CR1 register *******************/
+#define USART_CR1_UE ((uint32_t)0x00000001) /*!< USART Enable */
+#define USART_CR1_RE ((uint32_t)0x00000004) /*!< Receiver Enable */
+#define USART_CR1_TE ((uint32_t)0x00000008) /*!< Transmitter Enable */
+#define USART_CR1_IDLEIE ((uint32_t)0x00000010) /*!< IDLE Interrupt Enable */
+#define USART_CR1_RXNEIE ((uint32_t)0x00000020) /*!< RXNE Interrupt Enable */
+#define USART_CR1_TCIE ((uint32_t)0x00000040) /*!< Transmission Complete Interrupt Enable */
+#define USART_CR1_TXEIE ((uint32_t)0x00000080) /*!< TXE Interrupt Enable */
+#define USART_CR1_PEIE ((uint32_t)0x00000100) /*!< PE Interrupt Enable */
+#define USART_CR1_PS ((uint32_t)0x00000200) /*!< Parity Selection */
+#define USART_CR1_PCE ((uint32_t)0x00000400) /*!< Parity Control Enable */
+#define USART_CR1_WAKE ((uint32_t)0x00000800) /*!< Receiver Wakeup method */
+#define USART_CR1_M0 ((uint32_t)0x00001000) /*!< Word length bit 0 */
+#define USART_CR1_MME ((uint32_t)0x00002000) /*!< Mute Mode Enable */
+#define USART_CR1_CMIE ((uint32_t)0x00004000) /*!< Character match interrupt enable */
+#define USART_CR1_OVER8 ((uint32_t)0x00008000) /*!< Oversampling by 8-bit or 16-bit mode */
+#define USART_CR1_DEDT ((uint32_t)0x001F0000) /*!< DEDT[4:0] bits (Driver Enable Deassertion Time) */
+#define USART_CR1_DEDT_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define USART_CR1_DEDT_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define USART_CR1_DEDT_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define USART_CR1_DEDT_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+#define USART_CR1_DEDT_4 ((uint32_t)0x00100000) /*!< Bit 4 */
+#define USART_CR1_DEAT ((uint32_t)0x03E00000) /*!< DEAT[4:0] bits (Driver Enable Assertion Time) */
+#define USART_CR1_DEAT_0 ((uint32_t)0x00200000) /*!< Bit 0 */
+#define USART_CR1_DEAT_1 ((uint32_t)0x00400000) /*!< Bit 1 */
+#define USART_CR1_DEAT_2 ((uint32_t)0x00800000) /*!< Bit 2 */
+#define USART_CR1_DEAT_3 ((uint32_t)0x01000000) /*!< Bit 3 */
+#define USART_CR1_DEAT_4 ((uint32_t)0x02000000) /*!< Bit 4 */
+#define USART_CR1_RTOIE ((uint32_t)0x04000000) /*!< Receive Time Out interrupt enable */
+#define USART_CR1_EOBIE ((uint32_t)0x08000000) /*!< End of Block interrupt enable */
+#define USART_CR1_M1 ((uint32_t)0x10000000) /*!< Word length bit 1 */
+#define USART_CR1_M ((uint32_t)0x10001000) /*!< [M1:M0] Word length */
+
+/****************** Bit definition for USART_CR2 register *******************/
+#define USART_CR2_ADDM7 ((uint32_t)0x00000010) /*!< 7-bit or 4-bit Address Detection */
+#define USART_CR2_LBCL ((uint32_t)0x00000100) /*!< Last Bit Clock pulse */
+#define USART_CR2_CPHA ((uint32_t)0x00000200) /*!< Clock Phase */
+#define USART_CR2_CPOL ((uint32_t)0x00000400) /*!< Clock Polarity */
+#define USART_CR2_CLKEN ((uint32_t)0x00000800) /*!< Clock Enable */
+#define USART_CR2_STOP ((uint32_t)0x00003000) /*!< STOP[1:0] bits (STOP bits) */
+#define USART_CR2_STOP_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define USART_CR2_STOP_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+#define USART_CR2_LINEN ((uint32_t)0x00004000) /*!< Keep for compatibility */
+#define USART_CR2_SWAP ((uint32_t)0x00008000) /*!< SWAP TX/RX pins */
+#define USART_CR2_RXINV ((uint32_t)0x00010000) /*!< RX pin active level inversion */
+#define USART_CR2_TXINV ((uint32_t)0x00020000) /*!< TX pin active level inversion */
+#define USART_CR2_DATAINV ((uint32_t)0x00040000) /*!< Binary data inversion */
+#define USART_CR2_MSBFIRST ((uint32_t)0x00080000) /*!< Most Significant Bit First */
+#define USART_CR2_ABREN ((uint32_t)0x00100000) /*!< Auto Baud-Rate Enable*/
+#define USART_CR2_ABRMODE ((uint32_t)0x00600000) /*!< ABRMOD[1:0] bits (Auto Baud-Rate Mode) */
+#define USART_CR2_ABRMODE_0 ((uint32_t)0x00200000) /*!< Bit 0 */
+#define USART_CR2_ABRMODE_1 ((uint32_t)0x00400000) /*!< Bit 1 */
+#define USART_CR2_RTOEN ((uint32_t)0x00800000) /*!< Receiver Time-Out enable */
+#define USART_CR2_ADD ((uint32_t)0xFF000000) /*!< Address of the USART node */
+
+/****************** Bit definition for USART_CR3 register *******************/
+#define USART_CR3_EIE ((uint32_t)0x00000001) /*!< Error Interrupt Enable */
+#define USART_CR3_IREN ((uint32_t)0x00000002) /*!< Keep for compatibility */
+#define USART_CR3_HDSEL ((uint32_t)0x00000008) /*!< Half-Duplex Selection */
+#define USART_CR3_SCEN ((uint32_t)0x00000020) /*!< Keep for compatibility */
+#define USART_CR3_DMAR ((uint32_t)0x00000040) /*!< DMA Enable Receiver */
+#define USART_CR3_DMAT ((uint32_t)0x00000080) /*!< DMA Enable Transmitter */
+#define USART_CR3_RTSE ((uint32_t)0x00000100) /*!< RTS Enable */
+#define USART_CR3_CTSE ((uint32_t)0x00000200) /*!< CTS Enable */
+#define USART_CR3_CTSIE ((uint32_t)0x00000400) /*!< CTS Interrupt Enable */
+#define USART_CR3_ONEBIT ((uint32_t)0x00000800) /*!< One sample bit method enable */
+#define USART_CR3_OVRDIS ((uint32_t)0x00001000) /*!< Overrun Disable */
+#define USART_CR3_DDRE ((uint32_t)0x00002000) /*!< DMA Disable on Reception Error */
+#define USART_CR3_DEM ((uint32_t)0x00004000) /*!< Driver Enable Mode */
+#define USART_CR3_DEP ((uint32_t)0x00008000) /*!< Driver Enable Polarity Selection */
+
+/****************** Bit definition for USART_BRR register *******************/
+#define USART_BRR_DIV_FRACTION ((uint32_t)0x0000000F) /*!< Fraction of USARTDIV */
+#define USART_BRR_DIV_MANTISSA ((uint32_t)0x0000FFF0) /*!< Mantissa of USARTDIV */
+
+/****************** Bit definition for USART_GTPR register ******************/
+#define USART_GTPR_PSC ((uint32_t)0x000000FF) /*!< PSC[7:0] bits (Prescaler value) */
+#define USART_GTPR_GT ((uint32_t)0x0000FF00) /*!< GT[7:0] bits (Guard time value) */
+
+
+/******************* Bit definition for USART_RTOR register *****************/
+#define USART_RTOR_RTO ((uint32_t)0x00FFFFFF) /*!< Receiver Time Out Value */
+#define USART_RTOR_BLEN ((uint32_t)0xFF000000) /*!< Block Length */
+
+/******************* Bit definition for USART_RQR register ******************/
+#define USART_RQR_ABRRQ ((uint32_t)0x00000001) /*!< Auto-Baud Rate Request */
+#define USART_RQR_SBKRQ ((uint32_t)0x00000002) /*!< Send Break Request */
+#define USART_RQR_MMRQ ((uint32_t)0x00000004) /*!< Mute Mode Request */
+#define USART_RQR_RXFRQ ((uint32_t)0x00000008) /*!< Receive Data flush Request */
+
+/******************* Bit definition for USART_ISR register ******************/
+#define USART_ISR_PE ((uint32_t)0x00000001) /*!< Parity Error */
+#define USART_ISR_FE ((uint32_t)0x00000002) /*!< Framing Error */
+#define USART_ISR_NE ((uint32_t)0x00000004) /*!< Noise detected Flag */
+#define USART_ISR_ORE ((uint32_t)0x00000008) /*!< OverRun Error */
+#define USART_ISR_IDLE ((uint32_t)0x00000010) /*!< IDLE line detected */
+#define USART_ISR_RXNE ((uint32_t)0x00000020) /*!< Read Data Register Not Empty */
+#define USART_ISR_TC ((uint32_t)0x00000040) /*!< Transmission Complete */
+#define USART_ISR_TXE ((uint32_t)0x00000080) /*!< Transmit Data Register Empty */
+#define USART_ISR_CTSIF ((uint32_t)0x00000200) /*!< CTS interrupt flag */
+#define USART_ISR_CTS ((uint32_t)0x00000400) /*!< CTS flag */
+#define USART_ISR_RTOF ((uint32_t)0x00000800) /*!< Receiver Time Out */
+#define USART_ISR_EOBF ((uint32_t)0x00001000) /*!< End Of Block Flag */
+#define USART_ISR_ABRE ((uint32_t)0x00004000) /*!< Auto-Baud Rate Error */
+#define USART_ISR_ABRF ((uint32_t)0x00008000) /*!< Auto-Baud Rate Flag */
+#define USART_ISR_BUSY ((uint32_t)0x00010000) /*!< Busy Flag */
+#define USART_ISR_CMF ((uint32_t)0x00020000) /*!< Character Match Flag */
+#define USART_ISR_SBKF ((uint32_t)0x00040000) /*!< Send Break Flag */
+#define USART_ISR_TEACK ((uint32_t)0x00200000) /*!< Transmit Enable Acknowledge Flag */
+#define USART_ISR_REACK ((uint32_t)0x00400000) /*!< Receive Enable Acknowledge Flag */
+
+/******************* Bit definition for USART_ICR register ******************/
+#define USART_ICR_PECF ((uint32_t)0x00000001) /*!< Parity Error Clear Flag */
+#define USART_ICR_FECF ((uint32_t)0x00000002) /*!< Framing Error Clear Flag */
+#define USART_ICR_NCF ((uint32_t)0x00000004) /*!< Noise detected Clear Flag */
+#define USART_ICR_ORECF ((uint32_t)0x00000008) /*!< OverRun Error Clear Flag */
+#define USART_ICR_IDLECF ((uint32_t)0x00000010) /*!< IDLE line detected Clear Flag */
+#define USART_ICR_TCCF ((uint32_t)0x00000040) /*!< Transmission Complete Clear Flag */
+#define USART_ICR_CTSCF ((uint32_t)0x00000200) /*!< CTS Interrupt Clear Flag */
+#define USART_ICR_RTOCF ((uint32_t)0x00000800) /*!< Receiver Time Out Clear Flag */
+#define USART_ICR_CMCF ((uint32_t)0x00020000) /*!< Character Match Clear Flag */
+
+/******************* Bit definition for USART_RDR register ******************/
+#define USART_RDR_RDR ((uint16_t)0x01FF) /*!< RDR[8:0] bits (Receive Data value) */
+
+/******************* Bit definition for USART_TDR register ******************/
+#define USART_TDR_TDR ((uint16_t)0x01FF) /*!< TDR[8:0] bits (Transmit Data value) */
+
+/******************************************************************************/
+/* */
+/* USB Device General registers */
+/* */
+/******************************************************************************/
+#define USB_CNTR (USB_BASE + 0x40) /*!< Control register */
+#define USB_ISTR (USB_BASE + 0x44) /*!< Interrupt status register */
+#define USB_FNR (USB_BASE + 0x48) /*!< Frame number register */
+#define USB_DADDR (USB_BASE + 0x4C) /*!< Device address register */
+#define USB_BTABLE (USB_BASE + 0x50) /*!< Buffer Table address register */
+#define USB_LPMCSR (USB_BASE + 0x54) /*!< LPM Control and Status register */
+#define USB_BCDR (USB_BASE + 0x58) /*!< Battery Charging detector register*/
+
+/**************************** ISTR interrupt events *************************/
+#define USB_ISTR_CTR ((uint16_t)0x8000) /*!< Correct TRansfer (clear-only bit) */
+#define USB_ISTR_PMAOVR ((uint16_t)0x4000) /*!< DMA OVeR/underrun (clear-only bit) */
+#define USB_ISTR_ERR ((uint16_t)0x2000) /*!< ERRor (clear-only bit) */
+#define USB_ISTR_WKUP ((uint16_t)0x1000) /*!< WaKe UP (clear-only bit) */
+#define USB_ISTR_SUSP ((uint16_t)0x0800) /*!< SUSPend (clear-only bit) */
+#define USB_ISTR_RESET ((uint16_t)0x0400) /*!< RESET (clear-only bit) */
+#define USB_ISTR_SOF ((uint16_t)0x0200) /*!< Start Of Frame (clear-only bit) */
+#define USB_ISTR_ESOF ((uint16_t)0x0100) /*!< Expected Start Of Frame (clear-only bit) */
+#define USB_ISTR_L1REQ ((uint16_t)0x0080) /*!< LPM L1 state request */
+#define USB_ISTR_DIR ((uint16_t)0x0010) /*!< DIRection of transaction (read-only bit) */
+#define USB_ISTR_EP_ID ((uint16_t)0x000F) /*!< EndPoint IDentifier (read-only bit) */
+
+#define USB_CLR_CTR (~USB_ISTR_CTR) /*!< clear Correct TRansfer bit */
+#define USB_CLR_PMAOVR (~USB_ISTR_PMAOVR) /*!< clear DMA OVeR/underrun bit*/
+#define USB_CLR_ERR (~USB_ISTR_ERR) /*!< clear ERRor bit */
+#define USB_CLR_WKUP (~USB_ISTR_WKUP) /*!< clear WaKe UP bit */
+#define USB_CLR_SUSP (~USB_ISTR_SUSP) /*!< clear SUSPend bit */
+#define USB_CLR_RESET (~USB_ISTR_RESET) /*!< clear RESET bit */
+#define USB_CLR_SOF (~USB_ISTR_SOF) /*!< clear Start Of Frame bit */
+#define USB_CLR_ESOF (~USB_ISTR_ESOF) /*!< clear Expected Start Of Frame bit */
+#define USB_CLR_L1REQ (~USB_ISTR_L1REQ) /*!< clear LPM L1 bit */
+
+/************************* CNTR control register bits definitions ***********/
+#define USB_CNTR_CTRM ((uint16_t)0x8000) /*!< Correct TRansfer Mask */
+#define USB_CNTR_PMAOVRM ((uint16_t)0x4000) /*!< DMA OVeR/underrun Mask */
+#define USB_CNTR_ERRM ((uint16_t)0x2000) /*!< ERRor Mask */
+#define USB_CNTR_WKUPM ((uint16_t)0x1000) /*!< WaKe UP Mask */
+#define USB_CNTR_SUSPM ((uint16_t)0x0800) /*!< SUSPend Mask */
+#define USB_CNTR_RESETM ((uint16_t)0x0400) /*!< RESET Mask */
+#define USB_CNTR_SOFM ((uint16_t)0x0200) /*!< Start Of Frame Mask */
+#define USB_CNTR_ESOFM ((uint16_t)0x0100) /*!< Expected Start Of Frame Mask */
+#define USB_CNTR_L1REQM ((uint16_t)0x0080) /*!< LPM L1 state request interrupt mask */
+#define USB_CNTR_L1RESUME ((uint16_t)0x0020) /*!< LPM L1 Resume request */
+#define USB_CNTR_RESUME ((uint16_t)0x0010) /*!< RESUME request */
+#define USB_CNTR_FSUSP ((uint16_t)0x0008) /*!< Force SUSPend */
+#define USB_CNTR_LPMODE ((uint16_t)0x0004) /*!< Low-power MODE */
+#define USB_CNTR_PDWN ((uint16_t)0x0002) /*!< Power DoWN */
+#define USB_CNTR_FRES ((uint16_t)0x0001) /*!< Force USB RESet */
+
+/************************* BCDR control register bits definitions ***********/
+#define USB_BCDR_DPPU ((uint16_t)0x8000) /*!< DP Pull-up Enable */
+#define USB_BCDR_PS2DET ((uint16_t)0x0080) /*!< PS2 port or proprietary charger detected */
+#define USB_BCDR_SDET ((uint16_t)0x0040) /*!< Secondary detection (SD) status */
+#define USB_BCDR_PDET ((uint16_t)0x0020) /*!< Primary detection (PD) status */
+#define USB_BCDR_DCDET ((uint16_t)0x0010) /*!< Data contact detection (DCD) status */
+#define USB_BCDR_SDEN ((uint16_t)0x0008) /*!< Secondary detection (SD) mode enable */
+#define USB_BCDR_PDEN ((uint16_t)0x0004) /*!< Primary detection (PD) mode enable */
+#define USB_BCDR_DCDEN ((uint16_t)0x0002) /*!< Data contact detection (DCD) mode enable */
+#define USB_BCDR_BCDEN ((uint16_t)0x0001) /*!< Battery charging detector (BCD) enable */
+
+/*************************** LPM register bits definitions ******************/
+#define USB_LPMCSR_BESL ((uint16_t)0x00F0) /*!< BESL value received with last ACKed LPM Token */
+#define USB_LPMCSR_REMWAKE ((uint16_t)0x0008) /*!< bRemoteWake value received with last ACKed LPM Token */
+#define USB_LPMCSR_LPMACK ((uint16_t)0x0002) /*!< LPM Token acknowledge enable*/
+#define USB_LPMCSR_LMPEN ((uint16_t)0x0001) /*!< LPM support enable */
+
+/******************** FNR Frame Number Register bit definitions ************/
+#define USB_FNR_RXDP ((uint16_t)0x8000) /*!< status of D+ data line */
+#define USB_FNR_RXDM ((uint16_t)0x4000) /*!< status of D- data line */
+#define USB_FNR_LCK ((uint16_t)0x2000) /*!< LoCKed */
+#define USB_FNR_LSOF ((uint16_t)0x1800) /*!< Lost SOF */
+#define USB_FNR_FN ((uint16_t)0x07FF) /*!< Frame Number */
+
+/******************** DADDR Device ADDRess bit definitions ****************/
+#define USB_DADDR_EF ((uint8_t)0x80) /*!< USB device address Enable Function */
+#define USB_DADDR_ADD ((uint8_t)0x7F) /*!< USB device address */
+
+/****************************** Endpoint register *************************/
+#define USB_EP0R USB_BASE /*!< endpoint 0 register address */
+#define USB_EP1R (USB_BASE + 0x04) /*!< endpoint 1 register address */
+#define USB_EP2R (USB_BASE + 0x08) /*!< endpoint 2 register address */
+#define USB_EP3R (USB_BASE + 0x0C) /*!< endpoint 3 register address */
+#define USB_EP4R (USB_BASE + 0x10) /*!< endpoint 4 register address */
+#define USB_EP5R (USB_BASE + 0x14) /*!< endpoint 5 register address */
+#define USB_EP6R (USB_BASE + 0x18) /*!< endpoint 6 register address */
+#define USB_EP7R (USB_BASE + 0x1C) /*!< endpoint 7 register address */
+/* bit positions */
+#define USB_EP_CTR_RX ((uint16_t)0x8000) /*!< EndPoint Correct TRansfer RX */
+#define USB_EP_DTOG_RX ((uint16_t)0x4000) /*!< EndPoint Data TOGGLE RX */
+#define USB_EPRX_STAT ((uint16_t)0x3000) /*!< EndPoint RX STATus bit field */
+#define USB_EP_SETUP ((uint16_t)0x0800) /*!< EndPoint SETUP */
+#define USB_EP_T_FIELD ((uint16_t)0x0600) /*!< EndPoint TYPE */
+#define USB_EP_KIND ((uint16_t)0x0100) /*!< EndPoint KIND */
+#define USB_EP_CTR_TX ((uint16_t)0x0080) /*!< EndPoint Correct TRansfer TX */
+#define USB_EP_DTOG_TX ((uint16_t)0x0040) /*!< EndPoint Data TOGGLE TX */
+#define USB_EPTX_STAT ((uint16_t)0x0030) /*!< EndPoint TX STATus bit field */
+#define USB_EPADDR_FIELD ((uint16_t)0x000F) /*!< EndPoint ADDRess FIELD */
+
+/* EndPoint REGister MASK (no toggle fields) */
+#define USB_EPREG_MASK (USB_EP_CTR_RX|USB_EP_SETUP|USB_EP_T_FIELD|USB_EP_KIND|USB_EP_CTR_TX|USB_EPADDR_FIELD)
+ /*!< EP_TYPE[1:0] EndPoint TYPE */
+#define USB_EP_TYPE_MASK ((uint16_t)0x0600) /*!< EndPoint TYPE Mask */
+#define USB_EP_BULK ((uint16_t)0x0000) /*!< EndPoint BULK */
+#define USB_EP_CONTROL ((uint16_t)0x0200) /*!< EndPoint CONTROL */
+#define USB_EP_ISOCHRONOUS ((uint16_t)0x0400) /*!< EndPoint ISOCHRONOUS */
+#define USB_EP_INTERRUPT ((uint16_t)0x0600) /*!< EndPoint INTERRUPT */
+#define USB_EP_T_MASK (~USB_EP_T_FIELD & USB_EPREG_MASK)
+
+#define USB_EPKIND_MASK (~USB_EP_KIND & USB_EPREG_MASK) /*!< EP_KIND EndPoint KIND */
+ /*!< STAT_TX[1:0] STATus for TX transfer */
+#define USB_EP_TX_DIS ((uint16_t)0x0000) /*!< EndPoint TX DISabled */
+#define USB_EP_TX_STALL ((uint16_t)0x0010) /*!< EndPoint TX STALLed */
+#define USB_EP_TX_NAK ((uint16_t)0x0020) /*!< EndPoint TX NAKed */
+#define USB_EP_TX_VALID ((uint16_t)0x0030) /*!< EndPoint TX VALID */
+#define USB_EPTX_DTOG1 ((uint16_t)0x0010) /*!< EndPoint TX Data TOGgle bit1 */
+#define USB_EPTX_DTOG2 ((uint16_t)0x0020) /*!< EndPoint TX Data TOGgle bit2 */
+#define USB_EPTX_DTOGMASK (USB_EPTX_STAT|USB_EPREG_MASK)
+ /*!< STAT_RX[1:0] STATus for RX transfer */
+#define USB_EP_RX_DIS ((uint16_t)0x0000) /*!< EndPoint RX DISabled */
+#define USB_EP_RX_STALL ((uint16_t)0x1000) /*!< EndPoint RX STALLed */
+#define USB_EP_RX_NAK ((uint16_t)0x2000) /*!< EndPoint RX NAKed */
+#define USB_EP_RX_VALID ((uint16_t)0x3000) /*!< EndPoint RX VALID */
+#define USB_EPRX_DTOG1 ((uint16_t)0x1000) /*!< EndPoint RX Data TOGgle bit1 */
+#define USB_EPRX_DTOG2 ((uint16_t)0x2000) /*!< EndPoint RX Data TOGgle bit1 */
+#define USB_EPRX_DTOGMASK (USB_EPRX_STAT|USB_EPREG_MASK)
+
+/******************************************************************************/
+/* */
+/* Window WATCHDOG (WWDG) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for WWDG_CR register ********************/
+#define WWDG_CR_T ((uint32_t)0x7F) /*!<T[6:0] bits (7-Bit counter (MSB to LSB)) */
+#define WWDG_CR_T0 ((uint32_t)0x01) /*!<Bit 0 */
+#define WWDG_CR_T1 ((uint32_t)0x02) /*!<Bit 1 */
+#define WWDG_CR_T2 ((uint32_t)0x04) /*!<Bit 2 */
+#define WWDG_CR_T3 ((uint32_t)0x08) /*!<Bit 3 */
+#define WWDG_CR_T4 ((uint32_t)0x10) /*!<Bit 4 */
+#define WWDG_CR_T5 ((uint32_t)0x20) /*!<Bit 5 */
+#define WWDG_CR_T6 ((uint32_t)0x40) /*!<Bit 6 */
+
+#define WWDG_CR_WDGA ((uint32_t)0x80) /*!<Activation bit */
+
+/******************* Bit definition for WWDG_CFR register *******************/
+#define WWDG_CFR_W ((uint32_t)0x007F) /*!<W[6:0] bits (7-bit window value) */
+#define WWDG_CFR_W0 ((uint32_t)0x0001) /*!<Bit 0 */
+#define WWDG_CFR_W1 ((uint32_t)0x0002) /*!<Bit 1 */
+#define WWDG_CFR_W2 ((uint32_t)0x0004) /*!<Bit 2 */
+#define WWDG_CFR_W3 ((uint32_t)0x0008) /*!<Bit 3 */
+#define WWDG_CFR_W4 ((uint32_t)0x0010) /*!<Bit 4 */
+#define WWDG_CFR_W5 ((uint32_t)0x0020) /*!<Bit 5 */
+#define WWDG_CFR_W6 ((uint32_t)0x0040) /*!<Bit 6 */
+
+#define WWDG_CFR_WDGTB ((uint32_t)0x0180) /*!<WDGTB[1:0] bits (Timer Base) */
+#define WWDG_CFR_WDGTB0 ((uint32_t)0x0080) /*!<Bit 0 */
+#define WWDG_CFR_WDGTB1 ((uint32_t)0x0100) /*!<Bit 1 */
+
+#define WWDG_CFR_EWI ((uint32_t)0x0200) /*!<Early Wakeup Interrupt */
+
+/******************* Bit definition for WWDG_SR register ********************/
+#define WWDG_SR_EWIF ((uint32_t)0x01) /*!<Early Wakeup Interrupt Flag */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+
+/** @addtogroup Exported_macro
+ * @{
+ */
+
+/****************************** ADC Instances *********************************/
+#define IS_ADC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == ADC1)
+
+#define IS_ADC_COMMON_INSTANCE(INSTANCE) ((INSTANCE) == ADC)
+
+/****************************** CRC Instances *********************************/
+#define IS_CRC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CRC)
+
+/******************************* DMA Instances ******************************/
+#define IS_DMA_ALL_INSTANCE(INSTANCE) (((INSTANCE) == DMA1_Channel1) || \
+ ((INSTANCE) == DMA1_Channel2) || \
+ ((INSTANCE) == DMA1_Channel3) || \
+ ((INSTANCE) == DMA1_Channel4) || \
+ ((INSTANCE) == DMA1_Channel5))
+
+/****************************** GPIO Instances ********************************/
+#define IS_GPIO_ALL_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB) || \
+ ((INSTANCE) == GPIOC) || \
+ ((INSTANCE) == GPIOF))
+
+#define IS_GPIO_AF_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB) || \
+ ((INSTANCE) == GPIOF))
+
+/****************************** GPIO Lock Instances ****************************/
+#define IS_GPIO_LOCK_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB))
+
+/****************************** I2C Instances *********************************/
+#define IS_I2C_ALL_INSTANCE(INSTANCE) ((INSTANCE) == I2C1)
+
+/****************************** IWDG Instances ********************************/
+#define IS_IWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == IWDG)
+
+/****************************** RTC Instances *********************************/
+#define IS_RTC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == RTC)
+
+/****************************** SMBUS Instances *********************************/
+#define IS_SMBUS_ALL_INSTANCE(INSTANCE) ((INSTANCE) == I2C1)
+
+/****************************** SPI Instances *********************************/
+#define IS_SPI_ALL_INSTANCE(INSTANCE) ((INSTANCE) == SPI1)
+
+/****************************** TIM Instances *********************************/
+#define IS_TIM_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CC1_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CC2_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CC3_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CC4_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CC5_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1))
+
+#define IS_TIM_CC6_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1))
+
+#define IS_TIM_CLOCK_SELECT_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_TIX_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_ENCODER_INTERFACE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_HALL_INTERFACE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1))
+
+#define IS_TIM_XOR_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_MASTER_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_SLAVE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_32B_COUNTER_INSTANCE(INSTANCE) (0)
+
+#define IS_TIM_DMABURST_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_BREAK_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CCX_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM3) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM16) && \
+ (((CHANNEL) == TIM_CHANNEL_1))) \
+ || \
+ (((INSTANCE) == TIM17) && \
+ (((CHANNEL) == TIM_CHANNEL_1))))
+
+#define IS_TIM_CCXN_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3))) \
+ || \
+ (((INSTANCE) == TIM16) && \
+ ((CHANNEL) == TIM_CHANNEL_1)) \
+ || \
+ (((INSTANCE) == TIM17) && \
+ ((CHANNEL) == TIM_CHANNEL_1)))
+
+#define IS_TIM_COUNTER_MODE_SELECT_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_REPETITION_COUNTER_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CLOCK_DIVISION_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_BKIN2_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1))
+
+#define IS_TIM_TRGO2_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1))
+
+#define IS_TIM_DMA_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_DMA_CC_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_COMMUTATION_EVENT_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_REMAP_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM14))
+
+/******************** USART Instances : Synchronous mode **********************/
+#define IS_USART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/******************** USART Instances : auto Baud rate detection **************/
+#define IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/******************** UART Instances : Asynchronous mode **********************/
+#define IS_UART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/******************** UART Instances : Half-Duplex mode **********************/
+#define IS_UART_HALFDUPLEX_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/****************** UART Instances : Hardware Flow control ********************/
+#define IS_UART_HWFLOW_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/****************** UART Instances : Auto Baud Rate detection ********************/
+#define IS_UART_AUTOBAUDRATE_DETECTION_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+#define IS_UART_DRIVER_ENABLE_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/****************************** USB Instances ********************************/
+#define IS_USB_ALL_INSTANCE(INSTANCE) ((INSTANCE) == USB)
+
+/****************************** WWDG Instances ********************************/
+#define IS_WWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == WWDG)
+
+/**
+ * @}
+ */
+
+
+/******************************************************************************/
+/* For a painless codes migration between the STM32F0xx device product */
+/* lines, the aliases defined below are put in place to overcome the */
+/* differences in the interrupt handlers and IRQn definitions. */
+/* No need to update developed interrupt code when moving across */
+/* product lines within the same STM32F0 Family */
+/******************************************************************************/
+
+/* Aliases for __IRQn */
+#define RCC_CRS_IRQn RCC_IRQn
+#define DMA1_Ch1_IRQn DMA1_Channel1_IRQn
+#define DMA1_Ch2_3_DMA2_Ch1_2_IRQn DMA1_Channel2_3_IRQn
+#define DMA1_Ch4_7_DMA2_Ch3_5_IRQn DMA1_Channel4_5_IRQn
+#define DMA1_Channel4_5_6_7_IRQn DMA1_Channel4_5_IRQn
+#define ADC1_COMP_IRQn ADC1_IRQn
+
+/* Aliases for __IRQHandler */
+#define RCC_CRS_IRQHandler RCC_IRQHandler
+#define DMA1_Ch1_IRQHandler DMA1_Channel1_IRQHandler
+#define DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler DMA1_Channel2_3_IRQHandler
+#define DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler DMA1_Channel4_5_IRQHandler
+#define DMA1_Channel4_5_6_7_IRQHandler DMA1_Channel4_5_IRQHandler
+#define ADC1_COMP_IRQHandler ADC1_IRQHandler
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F070x6_H */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/include/devices/stm32f070xb.h b/f0/include/devices/stm32f070xb.h
new file mode 100755
index 0000000000000000000000000000000000000000..c43f0e2ea8da875db9f8a50dad0f97fe8acc6eee
--- /dev/null
+++ b/f0/include/devices/stm32f070xb.h
@@ -0,0 +1,3436 @@
+/**
+ ******************************************************************************
+ * @file stm32f070xb.h
+ * @author MCD Application Team
+ * @version V2.2.1
+ * @date 09-January-2015
+ * @brief CMSIS STM32F070xB devices Peripheral Access Layer Header File.
+ *
+ * This file contains:
+ * - Data structures and the address mapping for all peripherals
+ * - Peripheral's registers declarations and bits definition
+ * - Macros to access peripheral’s registers hardware
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS_Device
+ * @{
+ */
+
+/** @addtogroup stm32f070xb
+ * @{
+ */
+
+#ifndef __STM32F070xB_H
+#define __STM32F070xB_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+
+/**
+ * @brief Configuration of the Cortex-M0 Processor and Core Peripherals
+ */
+#define __CM0_REV 0 /*!< Core Revision r0p0 */
+#define __MPU_PRESENT 0 /*!< STM32F0xx do not provide MPU */
+#define __NVIC_PRIO_BITS 2 /*!< STM32F0xx uses 2 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F070xB device Interrupt Number Definition
+ */
+typedef enum
+{
+/****** Cortex-M0 Processor Exceptions Numbers **************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */
+ SVC_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */
+
+/****** STM32F070xB specific Interrupt Numbers **************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ RTC_IRQn = 2, /*!< RTC Interrupt through EXTI Lines 17, 19 and 20 */
+ FLASH_IRQn = 3, /*!< FLASH global Interrupt */
+ RCC_IRQn = 4, /*!< RCC Global Interrupts */
+ EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupts */
+ EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupts */
+ EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupts */
+ DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */
+ DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupts */
+ DMA1_Channel4_5_IRQn = 11, /*!< DMA1 Channel 4 and Channel 5 Interrupts */
+ ADC1_IRQn = 12, /*!< ADC1 interrupts (ADC interrupt combined with EXTI Lines 21 and 22 */
+ TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupts */
+ TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */
+ TIM3_IRQn = 16, /*!< TIM3 global Interrupt */
+ TIM6_IRQn = 17, /*!< TIM6 global Interrupts */
+ TIM7_IRQn = 18, /*!< TIM7 global Interrupt */
+ TIM14_IRQn = 19, /*!< TIM14 global Interrupt */
+ TIM15_IRQn = 20, /*!< TIM15 global Interrupt */
+ TIM16_IRQn = 21, /*!< TIM16 global Interrupt */
+ TIM17_IRQn = 22, /*!< TIM17 global Interrupt */
+ I2C1_IRQn = 23, /*!< I2C1 Event Interrupt & EXTI Line23 Interrupt (I2C1 wakeup) */
+ I2C2_IRQn = 24, /*!< I2C2 Event Interrupt */
+ SPI1_IRQn = 25, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 26, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 27, /*!< USART1 global Interrupt */
+ USART2_IRQn = 28, /*!< USART2 global Interrupt */
+ USART3_4_IRQn = 29, /*!< USART3 and USART4 global Interrupts */
+ USB_IRQn = 31 /*!< USB global Interrupts & EXTI Line18 Interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm0.h" /* Cortex-M0 processor and core peripherals */
+#include "system_stm32f0xx.h" /* STM32F0xx System Header */
+#include <stdint.h>
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< ADC Interrupt and Status register, Address offset:0x00 */
+ __IO uint32_t IER; /*!< ADC Interrupt Enable register, Address offset:0x04 */
+ __IO uint32_t CR; /*!< ADC Control register, Address offset:0x08 */
+ __IO uint32_t CFGR1; /*!< ADC Configuration register 1, Address offset:0x0C */
+ __IO uint32_t CFGR2; /*!< ADC Configuration register 2, Address offset:0x10 */
+ __IO uint32_t SMPR; /*!< ADC Sampling time register, Address offset:0x14 */
+ uint32_t RESERVED1; /*!< Reserved, 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, 0x1C */
+ __IO uint32_t TR; /*!< ADC watchdog threshold register, Address offset:0x20 */
+ uint32_t RESERVED3; /*!< Reserved, 0x24 */
+ __IO uint32_t CHSELR; /*!< ADC channel selection register, Address offset:0x28 */
+ uint32_t RESERVED4[5]; /*!< Reserved, 0x2C */
+ __IO uint32_t DR; /*!< ADC data register, Address offset:0x40 */
+}ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CCR;
+}ADC_Common_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+ uint32_t RESERVED2; /*!< Reserved, 0x0C */
+ __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */
+ __IO uint32_t RESERVED3; /*!< Reserved, 0x14 */
+}CRC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< DMA channel x configuration register */
+ __IO uint32_t CNDTR; /*!< DMA channel x number of data register */
+ __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */
+ __IO uint32_t CMAR; /*!< DMA channel x memory address register */
+}DMA_Channel_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */
+ __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */
+}DMA_TypeDef;
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!<EXTI Interrupt mask register, Address offset: 0x00 */
+ __IO uint32_t EMR; /*!<EXTI Event mask register, Address offset: 0x04 */
+ __IO uint32_t RTSR; /*!<EXTI Rising trigger selection register , Address offset: 0x08 */
+ __IO uint32_t FTSR; /*!<EXTI Falling trigger selection register, Address offset: 0x0C */
+ __IO uint32_t SWIER; /*!<EXTI Software interrupt event register, Address offset: 0x10 */
+ __IO uint32_t PR; /*!<EXTI Pending register, Address offset: 0x14 */
+}EXTI_TypeDef;
+
+/**
+ * @brief FLASH Registers
+ */
+typedef struct
+{
+ __IO uint32_t ACR; /*!<FLASH access control register, Address offset: 0x00 */
+ __IO uint32_t KEYR; /*!<FLASH key register, Address offset: 0x04 */
+ __IO uint32_t OPTKEYR; /*!<FLASH OPT key register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!<FLASH status register, Address offset: 0x0C */
+ __IO uint32_t CR; /*!<FLASH control register, Address offset: 0x10 */
+ __IO uint32_t AR; /*!<FLASH address register, Address offset: 0x14 */
+ __IO uint32_t RESERVED; /*!< Reserved, 0x18 */
+ __IO uint32_t OBR; /*!<FLASH option bytes register, Address offset: 0x1C */
+ __IO uint32_t WRPR; /*!<FLASH option bytes register, Address offset: 0x20 */
+}FLASH_TypeDef;
+
+
+/**
+ * @brief Option Bytes Registers
+ */
+typedef struct
+{
+ __IO uint16_t RDP; /*!< FLASH option byte Read protection, Address offset: 0x00 */
+ __IO uint16_t USER; /*!< FLASH option byte user options, Address offset: 0x02 */
+ __IO uint16_t DATA0; /*!< User data byte 0 (stored in FLASH_OBR[23:16]), Address offset: 0x04 */
+ __IO uint16_t DATA1; /*!< User data byte 1 (stored in FLASH_OBR[31:24]), Address offset: 0x06 */
+ __IO uint16_t WRP0; /*!< FLASH option byte write protection 0, Address offset: 0x08 */
+ __IO uint16_t WRP1; /*!< FLASH option byte write protection 1, Address offset: 0x0A */
+ __IO uint16_t WRP2; /*!< FLASH option byte write protection 2, Address offset: 0x0C */
+ __IO uint16_t WRP3; /*!< FLASH option byte write protection 3, Address offset: 0x0E */
+}OB_TypeDef;
+
+/**
+ * @brief General Purpose I/O
+ */
+
+typedef struct
+{
+ __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */
+ __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */
+ __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */
+ __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */
+ __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */
+ __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */
+ __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x1A */
+ __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */
+ __IO uint32_t AFR[2]; /*!< GPIO alternate function low register, Address offset: 0x20-0x24 */
+ __IO uint32_t BRR; /*!< GPIO bit reset register, Address offset: 0x28 */
+}GPIO_TypeDef;
+
+/**
+ * @brief SysTem Configuration
+ */
+
+typedef struct
+{
+ __IO uint32_t CFGR1; /*!< SYSCFG configuration register 1, Address offset: 0x00 */
+ uint32_t RESERVED; /*!< Reserved, 0x04 */
+ __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration register, Address offset: 0x14-0x08 */
+ __IO uint32_t CFGR2; /*!< SYSCFG configuration register 2, Address offset: 0x18 */
+}SYSCFG_TypeDef;
+
+/**
+ * @brief Inter-integrated Circuit Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */
+ __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */
+ __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */
+ __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */
+ __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */
+ __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */
+ __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */
+ __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */
+ __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */
+ __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */
+}I2C_TypeDef;
+
+/**
+ * @brief Independent WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */
+ __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */
+ __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */
+ __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */
+}IWDG_TypeDef;
+
+/**
+ * @brief Power Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< PWR power control register, Address offset: 0x00 */
+ __IO uint32_t CSR; /*!< PWR power control/status register, Address offset: 0x04 */
+}PWR_TypeDef;
+
+/**
+ * @brief Reset and Clock Control
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */
+ __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x04 */
+ __IO uint32_t CIR; /*!< RCC clock interrupt register, Address offset: 0x08 */
+ __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x0C */
+ __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x10 */
+ __IO uint32_t AHBENR; /*!< RCC AHB peripheral clock register, Address offset: 0x14 */
+ __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x18 */
+ __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x1C */
+ __IO uint32_t BDCR; /*!< RCC Backup domain control register, Address offset: 0x20 */
+ __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x24 */
+ __IO uint32_t AHBRSTR; /*!< RCC AHB peripheral reset register, Address offset: 0x28 */
+ __IO uint32_t CFGR2; /*!< RCC clock configuration register 2, Address offset: 0x2C */
+ __IO uint32_t CFGR3; /*!< RCC clock configuration register 3, Address offset: 0x30 */
+ __IO uint32_t CR2; /*!< RCC clock control register 2, Address offset: 0x34 */
+}RCC_TypeDef;
+
+/**
+ * @brief Real-Time Clock
+ */
+
+typedef struct
+{
+ __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */
+ __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */
+ __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */
+ uint32_t RESERVED1; /*!< Reserved, Address offset: 0x18 */
+ __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */
+ uint32_t RESERVED2; /*!< Reserved, Address offset: 0x20 */
+ __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */
+ __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */
+ __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */
+ __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */
+ __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */
+ __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */
+ __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */
+ __IO uint32_t TAFCR; /*!< RTC tamper and alternate function configuration register, Address offset: 0x40 */
+ __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */
+}RTC_TypeDef;
+
+/**
+ * @brief Serial Peripheral Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< SPI Control register 1 (not used in I2S mode), Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */
+ __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */
+ __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */
+ __IO uint32_t RXCRCR; /*!< SPI Rx CRC register (not used in I2S mode), Address offset: 0x14 */
+ __IO uint32_t TXCRCR; /*!< SPI Tx CRC register (not used in I2S mode), Address offset: 0x18 */
+ __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */
+ __IO uint32_t RESERVED1;/*!< Reserved, Address offset: 0x20 */
+}SPI_TypeDef;
+
+/**
+ * @brief TIM
+ */
+typedef struct
+{
+ __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */
+ __IO uint32_t SMCR; /*!< TIM slave Mode Control register, Address offset: 0x08 */
+ __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */
+ __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */
+ __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */
+ __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */
+ __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */
+ __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */
+ __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */
+ __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */
+ __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */
+ __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */
+ __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */
+ __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */
+ __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */
+ __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */
+ __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */
+ __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */
+ __IO uint32_t DMAR; /*!< TIM DMA address for full transfer register, Address offset: 0x4C */
+ __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */
+}TIM_TypeDef;
+
+
+/**
+ * @brief Universal Synchronous Asynchronous Receiver Transmitter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */
+ __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */
+ __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */
+ __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */
+ __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */
+ __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */
+ __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */
+ __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */
+ __IO uint16_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */
+ uint16_t RESERVED1; /*!< Reserved, 0x26 */
+ __IO uint16_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */
+ uint16_t RESERVED2; /*!< Reserved, 0x2A */
+}USART_TypeDef;
+
+/**
+ * @brief Universal Serial Bus Full Speed Device
+ */
+
+typedef struct
+{
+ __IO uint16_t EP0R; /*!< USB Endpoint 0 register, Address offset: 0x00 */
+ __IO uint16_t RESERVED0; /*!< Reserved */
+ __IO uint16_t EP1R; /*!< USB Endpoint 1 register, Address offset: 0x04 */
+ __IO uint16_t RESERVED1; /*!< Reserved */
+ __IO uint16_t EP2R; /*!< USB Endpoint 2 register, Address offset: 0x08 */
+ __IO uint16_t RESERVED2; /*!< Reserved */
+ __IO uint16_t EP3R; /*!< USB Endpoint 3 register, Address offset: 0x0C */
+ __IO uint16_t RESERVED3; /*!< Reserved */
+ __IO uint16_t EP4R; /*!< USB Endpoint 4 register, Address offset: 0x10 */
+ __IO uint16_t RESERVED4; /*!< Reserved */
+ __IO uint16_t EP5R; /*!< USB Endpoint 5 register, Address offset: 0x14 */
+ __IO uint16_t RESERVED5; /*!< Reserved */
+ __IO uint16_t EP6R; /*!< USB Endpoint 6 register, Address offset: 0x18 */
+ __IO uint16_t RESERVED6; /*!< Reserved */
+ __IO uint16_t EP7R; /*!< USB Endpoint 7 register, Address offset: 0x1C */
+ __IO uint16_t RESERVED7[17]; /*!< Reserved */
+ __IO uint16_t CNTR; /*!< Control register, Address offset: 0x40 */
+ __IO uint16_t RESERVED8; /*!< Reserved */
+ __IO uint16_t ISTR; /*!< Interrupt status register, Address offset: 0x44 */
+ __IO uint16_t RESERVED9; /*!< Reserved */
+ __IO uint16_t FNR; /*!< Frame number register, Address offset: 0x48 */
+ __IO uint16_t RESERVEDA; /*!< Reserved */
+ __IO uint16_t DADDR; /*!< Device address register, Address offset: 0x4C */
+ __IO uint16_t RESERVEDB; /*!< Reserved */
+ __IO uint16_t BTABLE; /*!< Buffer Table address register, Address offset: 0x50 */
+ __IO uint16_t RESERVEDC; /*!< Reserved */
+ __IO uint16_t LPMCSR; /*!< LPM Control and Status register, Address offset: 0x54 */
+ __IO uint16_t RESERVEDD; /*!< Reserved */
+ __IO uint16_t BCDR; /*!< Battery Charging detector register, Address offset: 0x58 */
+ __IO uint16_t RESERVEDE; /*!< Reserved */
+}USB_TypeDef;
+
+/**
+ * @brief Window WATCHDOG
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */
+ __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */
+}WWDG_TypeDef;
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_memory_map
+ * @{
+ */
+
+#define FLASH_BASE ((uint32_t)0x08000000) /*!< FLASH base address in the alias region */
+#define SRAM_BASE ((uint32_t)0x20000000) /*!< SRAM base address in the alias region */
+#define PERIPH_BASE ((uint32_t)0x40000000) /*!< Peripheral base address in the alias region */
+
+/*!< Peripheral memory map */
+#define APBPERIPH_BASE PERIPH_BASE
+#define AHBPERIPH_BASE (PERIPH_BASE + 0x00020000)
+#define AHB2PERIPH_BASE (PERIPH_BASE + 0x08000000)
+
+#define TIM3_BASE (APBPERIPH_BASE + 0x00000400)
+#define TIM6_BASE (APBPERIPH_BASE + 0x00001000)
+#define TIM7_BASE (APBPERIPH_BASE + 0x00001400)
+#define TIM14_BASE (APBPERIPH_BASE + 0x00002000)
+#define RTC_BASE (APBPERIPH_BASE + 0x00002800)
+#define WWDG_BASE (APBPERIPH_BASE + 0x00002C00)
+#define IWDG_BASE (APBPERIPH_BASE + 0x00003000)
+#define SPI2_BASE (APBPERIPH_BASE + 0x00003800)
+#define USART2_BASE (APBPERIPH_BASE + 0x00004400)
+#define USART3_BASE (APBPERIPH_BASE + 0x00004800)
+#define USART4_BASE (APBPERIPH_BASE + 0x00004C00)
+#define I2C1_BASE (APBPERIPH_BASE + 0x00005400)
+#define I2C2_BASE (APBPERIPH_BASE + 0x00005800)
+#define USB_BASE (APBPERIPH_BASE + 0x00005C00) /*!< USB_IP Peripheral Registers base address */
+#define USB_PMAADDR (APBPERIPH_BASE + 0x00006000) /*!< USB_IP Packet Memory Area base address */
+#define PWR_BASE (APBPERIPH_BASE + 0x00007000)
+#define SYSCFG_BASE (APBPERIPH_BASE + 0x00010000)
+#define EXTI_BASE (APBPERIPH_BASE + 0x00010400)
+#define ADC1_BASE (APBPERIPH_BASE + 0x00012400)
+#define ADC_BASE (APBPERIPH_BASE + 0x00012708)
+#define TIM1_BASE (APBPERIPH_BASE + 0x00012C00)
+#define SPI1_BASE (APBPERIPH_BASE + 0x00013000)
+#define USART1_BASE (APBPERIPH_BASE + 0x00013800)
+#define TIM15_BASE (APBPERIPH_BASE + 0x00014000)
+#define TIM16_BASE (APBPERIPH_BASE + 0x00014400)
+#define TIM17_BASE (APBPERIPH_BASE + 0x00014800)
+#define DBGMCU_BASE (APBPERIPH_BASE + 0x00015800)
+
+#define DMA1_BASE (AHBPERIPH_BASE + 0x00000000)
+#define DMA1_Channel1_BASE (DMA1_BASE + 0x00000008)
+#define DMA1_Channel2_BASE (DMA1_BASE + 0x0000001C)
+#define DMA1_Channel3_BASE (DMA1_BASE + 0x00000030)
+#define DMA1_Channel4_BASE (DMA1_BASE + 0x00000044)
+#define DMA1_Channel5_BASE (DMA1_BASE + 0x00000058)
+
+#define RCC_BASE (AHBPERIPH_BASE + 0x00001000)
+#define FLASH_R_BASE (AHBPERIPH_BASE + 0x00002000) /*!< FLASH registers base address */
+#define OB_BASE ((uint32_t)0x1FFFF800) /*!< FLASH Option Bytes base address */
+#define CRC_BASE (AHBPERIPH_BASE + 0x00003000)
+
+#define GPIOA_BASE (AHB2PERIPH_BASE + 0x00000000)
+#define GPIOB_BASE (AHB2PERIPH_BASE + 0x00000400)
+#define GPIOC_BASE (AHB2PERIPH_BASE + 0x00000800)
+#define GPIOD_BASE (AHB2PERIPH_BASE + 0x00000C00)
+#define GPIOF_BASE (AHB2PERIPH_BASE + 0x00001400)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_declaration
+ * @{
+ */
+
+#define TIM3 ((TIM_TypeDef *) TIM3_BASE)
+#define TIM6 ((TIM_TypeDef *) TIM6_BASE)
+#define TIM7 ((TIM_TypeDef *) TIM7_BASE)
+#define TIM14 ((TIM_TypeDef *) TIM14_BASE)
+#define RTC ((RTC_TypeDef *) RTC_BASE)
+#define WWDG ((WWDG_TypeDef *) WWDG_BASE)
+#define IWDG ((IWDG_TypeDef *) IWDG_BASE)
+#define SPI2 ((SPI_TypeDef *) SPI2_BASE)
+#define USART2 ((USART_TypeDef *) USART2_BASE)
+#define USART3 ((USART_TypeDef *) USART3_BASE)
+#define USART4 ((USART_TypeDef *) USART4_BASE)
+#define I2C1 ((I2C_TypeDef *) I2C1_BASE)
+#define I2C2 ((I2C_TypeDef *) I2C2_BASE)
+#define PWR ((PWR_TypeDef *) PWR_BASE)
+#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE)
+#define EXTI ((EXTI_TypeDef *) EXTI_BASE)
+#define ADC1 ((ADC_TypeDef *) ADC1_BASE)
+#define ADC ((ADC_Common_TypeDef *) ADC_BASE)
+#define TIM1 ((TIM_TypeDef *) TIM1_BASE)
+#define SPI1 ((SPI_TypeDef *) SPI1_BASE)
+#define USART1 ((USART_TypeDef *) USART1_BASE)
+#define TIM15 ((TIM_TypeDef *) TIM15_BASE)
+#define TIM16 ((TIM_TypeDef *) TIM16_BASE)
+#define TIM17 ((TIM_TypeDef *) TIM17_BASE)
+#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE)
+#define DMA1 ((DMA_TypeDef *) DMA1_BASE)
+#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE)
+#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE)
+#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE)
+#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE)
+#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE)
+#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE)
+#define OB ((OB_TypeDef *) OB_BASE)
+#define RCC ((RCC_TypeDef *) RCC_BASE)
+#define CRC ((CRC_TypeDef *) CRC_BASE)
+#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE)
+#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE)
+#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE)
+#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE)
+#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE)
+#define USB ((USB_TypeDef *) USB_BASE)
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_constants
+ * @{
+ */
+
+ /** @addtogroup Peripheral_Registers_Bits_Definition
+ * @{
+ */
+
+/******************************************************************************/
+/* Peripheral Registers Bits Definition */
+/******************************************************************************/
+/******************************************************************************/
+/* */
+/* Analog to Digital Converter (ADC) */
+/* */
+/******************************************************************************/
+/******************** Bits definition for ADC_ISR register ******************/
+#define ADC_ISR_AWD ((uint32_t)0x00000080) /*!< Analog watchdog flag */
+#define ADC_ISR_OVR ((uint32_t)0x00000010) /*!< Overrun flag */
+#define ADC_ISR_EOSEQ ((uint32_t)0x00000008) /*!< End of Sequence flag */
+#define ADC_ISR_EOC ((uint32_t)0x00000004) /*!< End of Conversion */
+#define ADC_ISR_EOSMP ((uint32_t)0x00000002) /*!< End of sampling flag */
+#define ADC_ISR_ADRDY ((uint32_t)0x00000001) /*!< ADC Ready */
+
+/* Old EOSEQ bit definition, maintained for legacy purpose */
+#define ADC_ISR_EOS ADC_ISR_EOSEQ
+
+/******************** Bits definition for ADC_IER register ******************/
+#define ADC_IER_AWDIE ((uint32_t)0x00000080) /*!< Analog Watchdog interrupt enable */
+#define ADC_IER_OVRIE ((uint32_t)0x00000010) /*!< Overrun interrupt enable */
+#define ADC_IER_EOSEQIE ((uint32_t)0x00000008) /*!< End of Sequence of conversion interrupt enable */
+#define ADC_IER_EOCIE ((uint32_t)0x00000004) /*!< End of Conversion interrupt enable */
+#define ADC_IER_EOSMPIE ((uint32_t)0x00000002) /*!< End of sampling interrupt enable */
+#define ADC_IER_ADRDYIE ((uint32_t)0x00000001) /*!< ADC Ready interrupt enable */
+
+/* Old EOSEQIE bit definition, maintained for legacy purpose */
+#define ADC_IER_EOSIE ADC_IER_EOSEQIE
+
+/******************** Bits definition for ADC_CR register *******************/
+#define ADC_CR_ADCAL ((uint32_t)0x80000000) /*!< ADC calibration */
+#define ADC_CR_ADSTP ((uint32_t)0x00000010) /*!< ADC stop of conversion command */
+#define ADC_CR_ADSTART ((uint32_t)0x00000004) /*!< ADC start of conversion */
+#define ADC_CR_ADDIS ((uint32_t)0x00000002) /*!< ADC disable command */
+#define ADC_CR_ADEN ((uint32_t)0x00000001) /*!< ADC enable control */
+
+/******************* Bits definition for ADC_CFGR1 register *****************/
+#define ADC_CFGR1_AWDCH ((uint32_t)0x7C000000) /*!< AWDCH[4:0] bits (Analog watchdog channel select bits) */
+#define ADC_CFGR1_AWDCH_0 ((uint32_t)0x04000000) /*!< Bit 0 */
+#define ADC_CFGR1_AWDCH_1 ((uint32_t)0x08000000) /*!< Bit 1 */
+#define ADC_CFGR1_AWDCH_2 ((uint32_t)0x10000000) /*!< Bit 2 */
+#define ADC_CFGR1_AWDCH_3 ((uint32_t)0x20000000) /*!< Bit 3 */
+#define ADC_CFGR1_AWDCH_4 ((uint32_t)0x40000000) /*!< Bit 4 */
+#define ADC_CFGR1_AWDEN ((uint32_t)0x00800000) /*!< Analog watchdog enable on regular channels */
+#define ADC_CFGR1_AWDSGL ((uint32_t)0x00400000) /*!< Enable the watchdog on a single channel or on all channels */
+#define ADC_CFGR1_DISCEN ((uint32_t)0x00010000) /*!< Discontinuous mode on regular channels */
+#define ADC_CFGR1_AUTOFF ((uint32_t)0x00008000) /*!< ADC auto power off */
+#define ADC_CFGR1_WAIT ((uint32_t)0x00004000) /*!< ADC wait conversion mode */
+#define ADC_CFGR1_CONT ((uint32_t)0x00002000) /*!< Continuous Conversion */
+#define ADC_CFGR1_OVRMOD ((uint32_t)0x00001000) /*!< Overrun mode */
+#define ADC_CFGR1_EXTEN ((uint32_t)0x00000C00) /*!< EXTEN[1:0] bits (External Trigger Conversion mode for regular channels) */
+#define ADC_CFGR1_EXTEN_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define ADC_CFGR1_EXTEN_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define ADC_CFGR1_EXTSEL ((uint32_t)0x000001C0) /*!< EXTSEL[2:0] bits (External Event Select for regular group) */
+#define ADC_CFGR1_EXTSEL_0 ((uint32_t)0x00000040) /*!< Bit 0 */
+#define ADC_CFGR1_EXTSEL_1 ((uint32_t)0x00000080) /*!< Bit 1 */
+#define ADC_CFGR1_EXTSEL_2 ((uint32_t)0x00000100) /*!< Bit 2 */
+#define ADC_CFGR1_ALIGN ((uint32_t)0x00000020) /*!< Data Alignment */
+#define ADC_CFGR1_RES ((uint32_t)0x00000018) /*!< RES[1:0] bits (Resolution) */
+#define ADC_CFGR1_RES_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define ADC_CFGR1_RES_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define ADC_CFGR1_SCANDIR ((uint32_t)0x00000004) /*!< Sequence scan direction */
+#define ADC_CFGR1_DMACFG ((uint32_t)0x00000002) /*!< Direct memory access configuration */
+#define ADC_CFGR1_DMAEN ((uint32_t)0x00000001) /*!< Direct memory access enable */
+
+/* Old WAIT bit definition, maintained for legacy purpose */
+#define ADC_CFGR1_AUTDLY ADC_CFGR1_WAIT
+
+/******************* Bits definition for ADC_CFGR2 register *****************/
+#define ADC_CFGR2_CKMODE ((uint32_t)0xC0000000) /*!< ADC clock mode */
+#define ADC_CFGR2_CKMODE_1 ((uint32_t)0x80000000) /*!< ADC clocked by PCLK div4 */
+#define ADC_CFGR2_CKMODE_0 ((uint32_t)0x40000000) /*!< ADC clocked by PCLK div2 */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_CFGR2_JITOFFDIV4 ADC_CFGR2_CKMODE_1 /*!< ADC clocked by PCLK div4 */
+#define ADC_CFGR2_JITOFFDIV2 ADC_CFGR2_CKMODE_0 /*!< ADC clocked by PCLK div2 */
+
+/****************** Bit definition for ADC_SMPR register ********************/
+#define ADC_SMPR_SMP ((uint32_t)0x00000007) /*!< SMP[2:0] bits (Sampling time selection) */
+#define ADC_SMPR_SMP_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define ADC_SMPR_SMP_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define ADC_SMPR_SMP_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_SMPR1_SMPR ADC_SMPR_SMP /*!< SMP[2:0] bits (Sampling time selection) */
+#define ADC_SMPR1_SMPR_0 ADC_SMPR_SMP_0 /*!< Bit 0 */
+#define ADC_SMPR1_SMPR_1 ADC_SMPR_SMP_1 /*!< Bit 1 */
+#define ADC_SMPR1_SMPR_2 ADC_SMPR_SMP_2 /*!< Bit 2 */
+
+/******************* Bit definition for ADC_TR register ********************/
+#define ADC_TR_HT ((uint32_t)0x0FFF0000) /*!< Analog watchdog high threshold */
+#define ADC_TR_LT ((uint32_t)0x00000FFF) /*!< Analog watchdog low threshold */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_HTR_HT ADC_TR_HT /*!< Analog watchdog high threshold */
+#define ADC_LTR_LT ADC_TR_LT /*!< Analog watchdog low threshold */
+
+/****************** Bit definition for ADC_CHSELR register ******************/
+#define ADC_CHSELR_CHSEL18 ((uint32_t)0x00040000) /*!< Channel 18 selection */
+#define ADC_CHSELR_CHSEL17 ((uint32_t)0x00020000) /*!< Channel 17 selection */
+#define ADC_CHSELR_CHSEL16 ((uint32_t)0x00010000) /*!< Channel 16 selection */
+#define ADC_CHSELR_CHSEL15 ((uint32_t)0x00008000) /*!< Channel 15 selection */
+#define ADC_CHSELR_CHSEL14 ((uint32_t)0x00004000) /*!< Channel 14 selection */
+#define ADC_CHSELR_CHSEL13 ((uint32_t)0x00002000) /*!< Channel 13 selection */
+#define ADC_CHSELR_CHSEL12 ((uint32_t)0x00001000) /*!< Channel 12 selection */
+#define ADC_CHSELR_CHSEL11 ((uint32_t)0x00000800) /*!< Channel 11 selection */
+#define ADC_CHSELR_CHSEL10 ((uint32_t)0x00000400) /*!< Channel 10 selection */
+#define ADC_CHSELR_CHSEL9 ((uint32_t)0x00000200) /*!< Channel 9 selection */
+#define ADC_CHSELR_CHSEL8 ((uint32_t)0x00000100) /*!< Channel 8 selection */
+#define ADC_CHSELR_CHSEL7 ((uint32_t)0x00000080) /*!< Channel 7 selection */
+#define ADC_CHSELR_CHSEL6 ((uint32_t)0x00000040) /*!< Channel 6 selection */
+#define ADC_CHSELR_CHSEL5 ((uint32_t)0x00000020) /*!< Channel 5 selection */
+#define ADC_CHSELR_CHSEL4 ((uint32_t)0x00000010) /*!< Channel 4 selection */
+#define ADC_CHSELR_CHSEL3 ((uint32_t)0x00000008) /*!< Channel 3 selection */
+#define ADC_CHSELR_CHSEL2 ((uint32_t)0x00000004) /*!< Channel 2 selection */
+#define ADC_CHSELR_CHSEL1 ((uint32_t)0x00000002) /*!< Channel 1 selection */
+#define ADC_CHSELR_CHSEL0 ((uint32_t)0x00000001) /*!< Channel 0 selection */
+
+/******************** Bit definition for ADC_DR register ********************/
+#define ADC_DR_DATA ((uint32_t)0x0000FFFF) /*!< Regular data */
+
+/******************* Bit definition for ADC_CCR register ********************/
+#define ADC_CCR_VBATEN ((uint32_t)0x01000000) /*!< Voltage battery enable */
+#define ADC_CCR_TSEN ((uint32_t)0x00800000) /*!< Tempurature sensore enable */
+#define ADC_CCR_VREFEN ((uint32_t)0x00400000) /*!< Vrefint enable */
+
+/******************************************************************************/
+/* */
+/* CRC calculation unit (CRC) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for CRC_DR register *********************/
+#define CRC_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data register bits */
+
+/******************* Bit definition for CRC_IDR register ********************/
+#define CRC_IDR_IDR ((uint8_t)0xFF) /*!< General-purpose 8-bit data register bits */
+
+/******************** Bit definition for CRC_CR register ********************/
+#define CRC_CR_RESET ((uint32_t)0x00000001) /*!< RESET the CRC computation unit bit */
+#define CRC_CR_REV_IN ((uint32_t)0x00000060) /*!< REV_IN Reverse Input Data bits */
+#define CRC_CR_REV_IN_0 ((uint32_t)0x00000020) /*!< REV_IN Bit 0 */
+#define CRC_CR_REV_IN_1 ((uint32_t)0x00000040) /*!< REV_IN Bit 1 */
+#define CRC_CR_REV_OUT ((uint32_t)0x00000080) /*!< REV_OUT Reverse Output Data bits */
+
+/******************* Bit definition for CRC_INIT register *******************/
+#define CRC_INIT_INIT ((uint32_t)0xFFFFFFFF) /*!< Initial CRC value bits */
+
+/******************************************************************************/
+/* */
+/* Debug MCU (DBGMCU) */
+/* */
+/******************************************************************************/
+
+/**************** Bit definition for DBGMCU_IDCODE register *****************/
+#define DBGMCU_IDCODE_DEV_ID ((uint32_t)0x00000FFF) /*!< Device Identifier */
+
+#define DBGMCU_IDCODE_REV_ID ((uint32_t)0xFFFF0000) /*!< REV_ID[15:0] bits (Revision Identifier) */
+#define DBGMCU_IDCODE_REV_ID_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define DBGMCU_IDCODE_REV_ID_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define DBGMCU_IDCODE_REV_ID_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define DBGMCU_IDCODE_REV_ID_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+#define DBGMCU_IDCODE_REV_ID_4 ((uint32_t)0x00100000) /*!< Bit 4 */
+#define DBGMCU_IDCODE_REV_ID_5 ((uint32_t)0x00200000) /*!< Bit 5 */
+#define DBGMCU_IDCODE_REV_ID_6 ((uint32_t)0x00400000) /*!< Bit 6 */
+#define DBGMCU_IDCODE_REV_ID_7 ((uint32_t)0x00800000) /*!< Bit 7 */
+#define DBGMCU_IDCODE_REV_ID_8 ((uint32_t)0x01000000) /*!< Bit 8 */
+#define DBGMCU_IDCODE_REV_ID_9 ((uint32_t)0x02000000) /*!< Bit 9 */
+#define DBGMCU_IDCODE_REV_ID_10 ((uint32_t)0x04000000) /*!< Bit 10 */
+#define DBGMCU_IDCODE_REV_ID_11 ((uint32_t)0x08000000) /*!< Bit 11 */
+#define DBGMCU_IDCODE_REV_ID_12 ((uint32_t)0x10000000) /*!< Bit 12 */
+#define DBGMCU_IDCODE_REV_ID_13 ((uint32_t)0x20000000) /*!< Bit 13 */
+#define DBGMCU_IDCODE_REV_ID_14 ((uint32_t)0x40000000) /*!< Bit 14 */
+#define DBGMCU_IDCODE_REV_ID_15 ((uint32_t)0x80000000) /*!< Bit 15 */
+
+/****************** Bit definition for DBGMCU_CR register *******************/
+#define DBGMCU_CR_DBG_STOP ((uint32_t)0x00000002) /*!< Debug Stop Mode */
+#define DBGMCU_CR_DBG_STANDBY ((uint32_t)0x00000004) /*!< Debug Standby mode */
+
+/****************** Bit definition for DBGMCU_APB1_FZ register **************/
+#define DBGMCU_APB1_FZ_DBG_TIM3_STOP ((uint32_t)0x00000002) /*!< TIM3 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM6_STOP ((uint32_t)0x00000010) /*!< TIM6 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM7_STOP ((uint32_t)0x00000020) /*!< TIM7 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM14_STOP ((uint32_t)0x00000100) /*!< TIM14 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_RTC_STOP ((uint32_t)0x00000400) /*!< RTC Calendar frozen when core is halted */
+#define DBGMCU_APB1_FZ_DBG_WWDG_STOP ((uint32_t)0x00000800) /*!< Debug Window Watchdog stopped when Core is halted */
+#define DBGMCU_APB1_FZ_DBG_IWDG_STOP ((uint32_t)0x00001000) /*!< Debug Independent Watchdog stopped when Core is halted */
+#define DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00200000) /*!< I2C1 SMBUS timeout mode stopped when Core is halted */
+
+/****************** Bit definition for DBGMCU_APB2_FZ register **************/
+#define DBGMCU_APB2_FZ_DBG_TIM1_STOP ((uint32_t)0x00000800) /*!< TIM1 counter stopped when core is halted */
+#define DBGMCU_APB2_FZ_DBG_TIM15_STOP ((uint32_t)0x00010000) /*!< TIM15 counter stopped when core is halted */
+#define DBGMCU_APB2_FZ_DBG_TIM16_STOP ((uint32_t)0x00020000) /*!< TIM16 counter stopped when core is halted */
+#define DBGMCU_APB2_FZ_DBG_TIM17_STOP ((uint32_t)0x00040000) /*!< TIM17 counter stopped when core is halted */
+
+/******************************************************************************/
+/* */
+/* DMA Controller (DMA) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for DMA_ISR register ********************/
+#define DMA_ISR_GIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt flag */
+#define DMA_ISR_TCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete flag */
+#define DMA_ISR_HTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer flag */
+#define DMA_ISR_TEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error flag */
+#define DMA_ISR_GIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt flag */
+#define DMA_ISR_TCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete flag */
+#define DMA_ISR_HTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer flag */
+#define DMA_ISR_TEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error flag */
+#define DMA_ISR_GIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt flag */
+#define DMA_ISR_TCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete flag */
+#define DMA_ISR_HTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer flag */
+#define DMA_ISR_TEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error flag */
+#define DMA_ISR_GIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt flag */
+#define DMA_ISR_TCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete flag */
+#define DMA_ISR_HTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer flag */
+#define DMA_ISR_TEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error flag */
+#define DMA_ISR_GIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt flag */
+#define DMA_ISR_TCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete flag */
+#define DMA_ISR_HTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer flag */
+#define DMA_ISR_TEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error flag */
+
+/******************* Bit definition for DMA_IFCR register *******************/
+#define DMA_IFCR_CGIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt clear */
+#define DMA_IFCR_CTCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete clear */
+#define DMA_IFCR_CHTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer clear */
+#define DMA_IFCR_CTEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error clear */
+#define DMA_IFCR_CGIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt clear */
+#define DMA_IFCR_CTCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete clear */
+#define DMA_IFCR_CHTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer clear */
+#define DMA_IFCR_CTEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error clear */
+#define DMA_IFCR_CGIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt clear */
+#define DMA_IFCR_CTCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete clear */
+#define DMA_IFCR_CHTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer clear */
+#define DMA_IFCR_CTEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error clear */
+#define DMA_IFCR_CGIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt clear */
+#define DMA_IFCR_CTCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete clear */
+#define DMA_IFCR_CHTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer clear */
+#define DMA_IFCR_CTEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error clear */
+#define DMA_IFCR_CGIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt clear */
+#define DMA_IFCR_CTCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete clear */
+#define DMA_IFCR_CHTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer clear */
+#define DMA_IFCR_CTEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error clear */
+
+/******************* Bit definition for DMA_CCR register ********************/
+#define DMA_CCR_EN ((uint32_t)0x00000001) /*!< Channel enable */
+#define DMA_CCR_TCIE ((uint32_t)0x00000002) /*!< Transfer complete interrupt enable */
+#define DMA_CCR_HTIE ((uint32_t)0x00000004) /*!< Half Transfer interrupt enable */
+#define DMA_CCR_TEIE ((uint32_t)0x00000008) /*!< Transfer error interrupt enable */
+#define DMA_CCR_DIR ((uint32_t)0x00000010) /*!< Data transfer direction */
+#define DMA_CCR_CIRC ((uint32_t)0x00000020) /*!< Circular mode */
+#define DMA_CCR_PINC ((uint32_t)0x00000040) /*!< Peripheral increment mode */
+#define DMA_CCR_MINC ((uint32_t)0x00000080) /*!< Memory increment mode */
+
+#define DMA_CCR_PSIZE ((uint32_t)0x00000300) /*!< PSIZE[1:0] bits (Peripheral size) */
+#define DMA_CCR_PSIZE_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define DMA_CCR_PSIZE_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+
+#define DMA_CCR_MSIZE ((uint32_t)0x00000C00) /*!< MSIZE[1:0] bits (Memory size) */
+#define DMA_CCR_MSIZE_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define DMA_CCR_MSIZE_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+
+#define DMA_CCR_PL ((uint32_t)0x00003000) /*!< PL[1:0] bits(Channel Priority level)*/
+#define DMA_CCR_PL_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define DMA_CCR_PL_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+
+#define DMA_CCR_MEM2MEM ((uint32_t)0x00004000) /*!< Memory to memory mode */
+
+/****************** Bit definition for DMA_CNDTR register *******************/
+#define DMA_CNDTR_NDT ((uint32_t)0x0000FFFF) /*!< Number of data to Transfer */
+
+/****************** Bit definition for DMA_CPAR register ********************/
+#define DMA_CPAR_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */
+
+/****************** Bit definition for DMA_CMAR register ********************/
+#define DMA_CMAR_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */
+
+/******************************************************************************/
+/* */
+/* External Interrupt/Event Controller (EXTI) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for EXTI_IMR register *******************/
+#define EXTI_IMR_MR0 ((uint32_t)0x00000001) /*!< Interrupt Mask on line 0 */
+#define EXTI_IMR_MR1 ((uint32_t)0x00000002) /*!< Interrupt Mask on line 1 */
+#define EXTI_IMR_MR2 ((uint32_t)0x00000004) /*!< Interrupt Mask on line 2 */
+#define EXTI_IMR_MR3 ((uint32_t)0x00000008) /*!< Interrupt Mask on line 3 */
+#define EXTI_IMR_MR4 ((uint32_t)0x00000010) /*!< Interrupt Mask on line 4 */
+#define EXTI_IMR_MR5 ((uint32_t)0x00000020) /*!< Interrupt Mask on line 5 */
+#define EXTI_IMR_MR6 ((uint32_t)0x00000040) /*!< Interrupt Mask on line 6 */
+#define EXTI_IMR_MR7 ((uint32_t)0x00000080) /*!< Interrupt Mask on line 7 */
+#define EXTI_IMR_MR8 ((uint32_t)0x00000100) /*!< Interrupt Mask on line 8 */
+#define EXTI_IMR_MR9 ((uint32_t)0x00000200) /*!< Interrupt Mask on line 9 */
+#define EXTI_IMR_MR10 ((uint32_t)0x00000400) /*!< Interrupt Mask on line 10 */
+#define EXTI_IMR_MR11 ((uint32_t)0x00000800) /*!< Interrupt Mask on line 11 */
+#define EXTI_IMR_MR12 ((uint32_t)0x00001000) /*!< Interrupt Mask on line 12 */
+#define EXTI_IMR_MR13 ((uint32_t)0x00002000) /*!< Interrupt Mask on line 13 */
+#define EXTI_IMR_MR14 ((uint32_t)0x00004000) /*!< Interrupt Mask on line 14 */
+#define EXTI_IMR_MR15 ((uint32_t)0x00008000) /*!< Interrupt Mask on line 15 */
+#define EXTI_IMR_MR17 ((uint32_t)0x00020000) /*!< Interrupt Mask on line 17 */
+#define EXTI_IMR_MR18 ((uint32_t)0x00040000) /*!< Interrupt Mask on line 18 */
+#define EXTI_IMR_MR19 ((uint32_t)0x00080000) /*!< Interrupt Mask on line 19 */
+#define EXTI_IMR_MR20 ((uint32_t)0x00100000) /*!< Interrupt Mask on line 20 */
+#define EXTI_IMR_MR23 ((uint32_t)0x00800000) /*!< Interrupt Mask on line 23 */
+
+/****************** Bit definition for EXTI_EMR register ********************/
+#define EXTI_EMR_MR0 ((uint32_t)0x00000001) /*!< Event Mask on line 0 */
+#define EXTI_EMR_MR1 ((uint32_t)0x00000002) /*!< Event Mask on line 1 */
+#define EXTI_EMR_MR2 ((uint32_t)0x00000004) /*!< Event Mask on line 2 */
+#define EXTI_EMR_MR3 ((uint32_t)0x00000008) /*!< Event Mask on line 3 */
+#define EXTI_EMR_MR4 ((uint32_t)0x00000010) /*!< Event Mask on line 4 */
+#define EXTI_EMR_MR5 ((uint32_t)0x00000020) /*!< Event Mask on line 5 */
+#define EXTI_EMR_MR6 ((uint32_t)0x00000040) /*!< Event Mask on line 6 */
+#define EXTI_EMR_MR7 ((uint32_t)0x00000080) /*!< Event Mask on line 7 */
+#define EXTI_EMR_MR8 ((uint32_t)0x00000100) /*!< Event Mask on line 8 */
+#define EXTI_EMR_MR9 ((uint32_t)0x00000200) /*!< Event Mask on line 9 */
+#define EXTI_EMR_MR10 ((uint32_t)0x00000400) /*!< Event Mask on line 10 */
+#define EXTI_EMR_MR11 ((uint32_t)0x00000800) /*!< Event Mask on line 11 */
+#define EXTI_EMR_MR12 ((uint32_t)0x00001000) /*!< Event Mask on line 12 */
+#define EXTI_EMR_MR13 ((uint32_t)0x00002000) /*!< Event Mask on line 13 */
+#define EXTI_EMR_MR14 ((uint32_t)0x00004000) /*!< Event Mask on line 14 */
+#define EXTI_EMR_MR15 ((uint32_t)0x00008000) /*!< Event Mask on line 15 */
+#define EXTI_EMR_MR17 ((uint32_t)0x00020000) /*!< Event Mask on line 17 */
+#define EXTI_EMR_MR18 ((uint32_t)0x00040000) /*!< Event Mask on line 18 */
+#define EXTI_EMR_MR19 ((uint32_t)0x00080000) /*!< Event Mask on line 19 */
+#define EXTI_EMR_MR20 ((uint32_t)0x00100000) /*!< Event Mask on line 20 */
+#define EXTI_EMR_MR23 ((uint32_t)0x00800000) /*!< Event Mask on line 23 */
+
+/******************* Bit definition for EXTI_RTSR register ******************/
+#define EXTI_RTSR_TR0 ((uint32_t)0x00000001) /*!< Rising trigger event configuration bit of line 0 */
+#define EXTI_RTSR_TR1 ((uint32_t)0x00000002) /*!< Rising trigger event configuration bit of line 1 */
+#define EXTI_RTSR_TR2 ((uint32_t)0x00000004) /*!< Rising trigger event configuration bit of line 2 */
+#define EXTI_RTSR_TR3 ((uint32_t)0x00000008) /*!< Rising trigger event configuration bit of line 3 */
+#define EXTI_RTSR_TR4 ((uint32_t)0x00000010) /*!< Rising trigger event configuration bit of line 4 */
+#define EXTI_RTSR_TR5 ((uint32_t)0x00000020) /*!< Rising trigger event configuration bit of line 5 */
+#define EXTI_RTSR_TR6 ((uint32_t)0x00000040) /*!< Rising trigger event configuration bit of line 6 */
+#define EXTI_RTSR_TR7 ((uint32_t)0x00000080) /*!< Rising trigger event configuration bit of line 7 */
+#define EXTI_RTSR_TR8 ((uint32_t)0x00000100) /*!< Rising trigger event configuration bit of line 8 */
+#define EXTI_RTSR_TR9 ((uint32_t)0x00000200) /*!< Rising trigger event configuration bit of line 9 */
+#define EXTI_RTSR_TR10 ((uint32_t)0x00000400) /*!< Rising trigger event configuration bit of line 10 */
+#define EXTI_RTSR_TR11 ((uint32_t)0x00000800) /*!< Rising trigger event configuration bit of line 11 */
+#define EXTI_RTSR_TR12 ((uint32_t)0x00001000) /*!< Rising trigger event configuration bit of line 12 */
+#define EXTI_RTSR_TR13 ((uint32_t)0x00002000) /*!< Rising trigger event configuration bit of line 13 */
+#define EXTI_RTSR_TR14 ((uint32_t)0x00004000) /*!< Rising trigger event configuration bit of line 14 */
+#define EXTI_RTSR_TR15 ((uint32_t)0x00008000) /*!< Rising trigger event configuration bit of line 15 */
+#define EXTI_RTSR_TR16 ((uint32_t)0x00010000) /*!< Rising trigger event configuration bit of line 16 */
+#define EXTI_RTSR_TR17 ((uint32_t)0x00020000) /*!< Rising trigger event configuration bit of line 17 */
+#define EXTI_RTSR_TR19 ((uint32_t)0x00080000) /*!< Rising trigger event configuration bit of line 19 */
+#define EXTI_RTSR_TR20 ((uint32_t)0x00100000) /*!< Rising trigger event configuration bit of line 20 */
+#define EXTI_RTSR_TR21 ((uint32_t)0x00200000) /*!< Rising trigger event configuration bit of line 21 */
+#define EXTI_RTSR_TR22 ((uint32_t)0x00400000) /*!< Rising trigger event configuration bit of line 22 */
+
+/******************* Bit definition for EXTI_FTSR register *******************/
+#define EXTI_FTSR_TR0 ((uint32_t)0x00000001) /*!< Falling trigger event configuration bit of line 0 */
+#define EXTI_FTSR_TR1 ((uint32_t)0x00000002) /*!< Falling trigger event configuration bit of line 1 */
+#define EXTI_FTSR_TR2 ((uint32_t)0x00000004) /*!< Falling trigger event configuration bit of line 2 */
+#define EXTI_FTSR_TR3 ((uint32_t)0x00000008) /*!< Falling trigger event configuration bit of line 3 */
+#define EXTI_FTSR_TR4 ((uint32_t)0x00000010) /*!< Falling trigger event configuration bit of line 4 */
+#define EXTI_FTSR_TR5 ((uint32_t)0x00000020) /*!< Falling trigger event configuration bit of line 5 */
+#define EXTI_FTSR_TR6 ((uint32_t)0x00000040) /*!< Falling trigger event configuration bit of line 6 */
+#define EXTI_FTSR_TR7 ((uint32_t)0x00000080) /*!< Falling trigger event configuration bit of line 7 */
+#define EXTI_FTSR_TR8 ((uint32_t)0x00000100) /*!< Falling trigger event configuration bit of line 8 */
+#define EXTI_FTSR_TR9 ((uint32_t)0x00000200) /*!< Falling trigger event configuration bit of line 9 */
+#define EXTI_FTSR_TR10 ((uint32_t)0x00000400) /*!< Falling trigger event configuration bit of line 10 */
+#define EXTI_FTSR_TR11 ((uint32_t)0x00000800) /*!< Falling trigger event configuration bit of line 11 */
+#define EXTI_FTSR_TR12 ((uint32_t)0x00001000) /*!< Falling trigger event configuration bit of line 12 */
+#define EXTI_FTSR_TR13 ((uint32_t)0x00002000) /*!< Falling trigger event configuration bit of line 13 */
+#define EXTI_FTSR_TR14 ((uint32_t)0x00004000) /*!< Falling trigger event configuration bit of line 14 */
+#define EXTI_FTSR_TR15 ((uint32_t)0x00008000) /*!< Falling trigger event configuration bit of line 15 */
+#define EXTI_FTSR_TR16 ((uint32_t)0x00010000) /*!< Falling trigger event configuration bit of line 16 */
+#define EXTI_FTSR_TR17 ((uint32_t)0x00020000) /*!< Falling trigger event configuration bit of line 17 */
+#define EXTI_FTSR_TR19 ((uint32_t)0x00080000) /*!< Falling trigger event configuration bit of line 19 */
+#define EXTI_FTSR_TR20 ((uint32_t)0x00100000) /*!< Falling trigger event configuration bit of line 20 */
+#define EXTI_FTSR_TR21 ((uint32_t)0x00200000) /*!< Falling trigger event configuration bit of line 21 */
+#define EXTI_FTSR_TR22 ((uint32_t)0x00400000) /*!< Falling trigger event configuration bit of line 22 */
+
+/******************* Bit definition for EXTI_SWIER register *******************/
+#define EXTI_SWIER_SWIER0 ((uint32_t)0x00000001) /*!< Software Interrupt on line 0 */
+#define EXTI_SWIER_SWIER1 ((uint32_t)0x00000002) /*!< Software Interrupt on line 1 */
+#define EXTI_SWIER_SWIER2 ((uint32_t)0x00000004) /*!< Software Interrupt on line 2 */
+#define EXTI_SWIER_SWIER3 ((uint32_t)0x00000008) /*!< Software Interrupt on line 3 */
+#define EXTI_SWIER_SWIER4 ((uint32_t)0x00000010) /*!< Software Interrupt on line 4 */
+#define EXTI_SWIER_SWIER5 ((uint32_t)0x00000020) /*!< Software Interrupt on line 5 */
+#define EXTI_SWIER_SWIER6 ((uint32_t)0x00000040) /*!< Software Interrupt on line 6 */
+#define EXTI_SWIER_SWIER7 ((uint32_t)0x00000080) /*!< Software Interrupt on line 7 */
+#define EXTI_SWIER_SWIER8 ((uint32_t)0x00000100) /*!< Software Interrupt on line 8 */
+#define EXTI_SWIER_SWIER9 ((uint32_t)0x00000200) /*!< Software Interrupt on line 9 */
+#define EXTI_SWIER_SWIER10 ((uint32_t)0x00000400) /*!< Software Interrupt on line 10 */
+#define EXTI_SWIER_SWIER11 ((uint32_t)0x00000800) /*!< Software Interrupt on line 11 */
+#define EXTI_SWIER_SWIER12 ((uint32_t)0x00001000) /*!< Software Interrupt on line 12 */
+#define EXTI_SWIER_SWIER13 ((uint32_t)0x00002000) /*!< Software Interrupt on line 13 */
+#define EXTI_SWIER_SWIER14 ((uint32_t)0x00004000) /*!< Software Interrupt on line 14 */
+#define EXTI_SWIER_SWIER15 ((uint32_t)0x00008000) /*!< Software Interrupt on line 15 */
+#define EXTI_SWIER_SWIER16 ((uint32_t)0x00010000) /*!< Software Interrupt on line 16 */
+#define EXTI_SWIER_SWIER17 ((uint32_t)0x00020000) /*!< Software Interrupt on line 17 */
+#define EXTI_SWIER_SWIER19 ((uint32_t)0x00080000) /*!< Software Interrupt on line 19 */
+#define EXTI_SWIER_SWIER20 ((uint32_t)0x00100000) /*!< Software Interrupt on line 20 */
+#define EXTI_SWIER_SWIER21 ((uint32_t)0x00200000) /*!< Software Interrupt on line 21 */
+#define EXTI_SWIER_SWIER22 ((uint32_t)0x00400000) /*!< Software Interrupt on line 22 */
+
+/****************** Bit definition for EXTI_PR register *********************/
+#define EXTI_PR_PR0 ((uint32_t)0x00000001) /*!< Pending bit 0 */
+#define EXTI_PR_PR1 ((uint32_t)0x00000002) /*!< Pending bit 1 */
+#define EXTI_PR_PR2 ((uint32_t)0x00000004) /*!< Pending bit 2 */
+#define EXTI_PR_PR3 ((uint32_t)0x00000008) /*!< Pending bit 3 */
+#define EXTI_PR_PR4 ((uint32_t)0x00000010) /*!< Pending bit 4 */
+#define EXTI_PR_PR5 ((uint32_t)0x00000020) /*!< Pending bit 5 */
+#define EXTI_PR_PR6 ((uint32_t)0x00000040) /*!< Pending bit 6 */
+#define EXTI_PR_PR7 ((uint32_t)0x00000080) /*!< Pending bit 7 */
+#define EXTI_PR_PR8 ((uint32_t)0x00000100) /*!< Pending bit 8 */
+#define EXTI_PR_PR9 ((uint32_t)0x00000200) /*!< Pending bit 9 */
+#define EXTI_PR_PR10 ((uint32_t)0x00000400) /*!< Pending bit 10 */
+#define EXTI_PR_PR11 ((uint32_t)0x00000800) /*!< Pending bit 11 */
+#define EXTI_PR_PR12 ((uint32_t)0x00001000) /*!< Pending bit 12 */
+#define EXTI_PR_PR13 ((uint32_t)0x00002000) /*!< Pending bit 13 */
+#define EXTI_PR_PR14 ((uint32_t)0x00004000) /*!< Pending bit 14 */
+#define EXTI_PR_PR15 ((uint32_t)0x00008000) /*!< Pending bit 15 */
+#define EXTI_PR_PR16 ((uint32_t)0x00010000) /*!< Pending bit 16 */
+#define EXTI_PR_PR17 ((uint32_t)0x00020000) /*!< Pending bit 17 */
+#define EXTI_PR_PR19 ((uint32_t)0x00080000) /*!< Pending bit 19 */
+#define EXTI_PR_PR20 ((uint32_t)0x00100000) /*!< Pending bit 20 */
+#define EXTI_PR_PR21 ((uint32_t)0x00200000) /*!< Pending bit 21 */
+#define EXTI_PR_PR22 ((uint32_t)0x00400000) /*!< Pending bit 22 */
+
+/******************************************************************************/
+/* */
+/* FLASH and Option Bytes Registers */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for FLASH_ACR register ******************/
+#define FLASH_ACR_LATENCY ((uint32_t)0x00000001) /*!< LATENCY bit (Latency) */
+
+#define FLASH_ACR_PRFTBE ((uint32_t)0x00000010) /*!< Prefetch Buffer Enable */
+#define FLASH_ACR_PRFTBS ((uint32_t)0x00000020) /*!< Prefetch Buffer Status */
+
+/****************** Bit definition for FLASH_KEYR register ******************/
+#define FLASH_KEYR_FKEYR ((uint32_t)0xFFFFFFFF) /*!< FPEC Key */
+
+/***************** Bit definition for FLASH_OPTKEYR register ****************/
+#define FLASH_OPTKEYR_OPTKEYR ((uint32_t)0xFFFFFFFF) /*!< Option Byte Key */
+
+/****************** FLASH Keys **********************************************/
+#define FLASH_FKEY1 ((uint32_t)0x45670123) /*!< Flash program erase key1 */
+#define FLASH_FKEY2 ((uint32_t)0xCDEF89AB) /*!< Flash program erase key2: used with FLASH_PEKEY1
+ to unlock the write access to the FPEC. */
+
+#define FLASH_OPTKEY1 ((uint32_t)0x45670123) /*!< Flash option key1 */
+#define FLASH_OPTKEY2 ((uint32_t)0xCDEF89AB) /*!< Flash option key2: used with FLASH_OPTKEY1 to
+ unlock the write access to the option byte block */
+
+/****************** Bit definition for FLASH_SR register *******************/
+#define FLASH_SR_BSY ((uint32_t)0x00000001) /*!< Busy */
+#define FLASH_SR_PGERR ((uint32_t)0x00000004) /*!< Programming Error */
+#define FLASH_SR_WRPRTERR ((uint32_t)0x00000010) /*!< Write Protection Error */
+#define FLASH_SR_EOP ((uint32_t)0x00000020) /*!< End of operation */
+#define FLASH_SR_WRPERR FLASH_SR_WRPRTERR /*!< Legacy of Write Protection Error */
+
+/******************* Bit definition for FLASH_CR register *******************/
+#define FLASH_CR_PG ((uint32_t)0x00000001) /*!< Programming */
+#define FLASH_CR_PER ((uint32_t)0x00000002) /*!< Page Erase */
+#define FLASH_CR_MER ((uint32_t)0x00000004) /*!< Mass Erase */
+#define FLASH_CR_OPTPG ((uint32_t)0x00000010) /*!< Option Byte Programming */
+#define FLASH_CR_OPTER ((uint32_t)0x00000020) /*!< Option Byte Erase */
+#define FLASH_CR_STRT ((uint32_t)0x00000040) /*!< Start */
+#define FLASH_CR_LOCK ((uint32_t)0x00000080) /*!< Lock */
+#define FLASH_CR_OPTWRE ((uint32_t)0x00000200) /*!< Option Bytes Write Enable */
+#define FLASH_CR_ERRIE ((uint32_t)0x00000400) /*!< Error Interrupt Enable */
+#define FLASH_CR_EOPIE ((uint32_t)0x00001000) /*!< End of operation interrupt enable */
+#define FLASH_CR_OBL_LAUNCH ((uint32_t)0x00002000) /*!< Option Bytes Loader Launch */
+
+/******************* Bit definition for FLASH_AR register *******************/
+#define FLASH_AR_FAR ((uint32_t)0xFFFFFFFF) /*!< Flash Address */
+
+/****************** Bit definition for FLASH_OBR register *******************/
+#define FLASH_OBR_OPTERR ((uint32_t)0x00000001) /*!< Option Byte Error */
+#define FLASH_OBR_RDPRT1 ((uint32_t)0x00000002) /*!< Read protection Level 1 */
+#define FLASH_OBR_RDPRT2 ((uint32_t)0x00000004) /*!< Read protection Level 2 */
+
+#define FLASH_OBR_USER ((uint32_t)0x00003700) /*!< User Option Bytes */
+#define FLASH_OBR_IWDG_SW ((uint32_t)0x00000100) /*!< IWDG SW */
+#define FLASH_OBR_nRST_STOP ((uint32_t)0x00000200) /*!< nRST_STOP */
+#define FLASH_OBR_nRST_STDBY ((uint32_t)0x00000400) /*!< nRST_STDBY */
+#define FLASH_OBR_nBOOT1 ((uint32_t)0x00001000) /*!< nBOOT1 */
+#define FLASH_OBR_VDDA_MONITOR ((uint32_t)0x00002000) /*!< VDDA power supply supervisor */
+
+/* Old BOOT1 bit definition, maintained for legacy purpose */
+#define FLASH_OBR_BOOT1 FLASH_OBR_nBOOT1
+
+/* Old OBR_VDDA bit definition, maintained for legacy purpose */
+#define FLASH_OBR_VDDA_ANALOG FLASH_OBR_VDDA_MONITOR
+
+/****************** Bit definition for FLASH_WRPR register ******************/
+#define FLASH_WRPR_WRP ((uint32_t)0x0000FFFF) /*!< Write Protect */
+
+/*----------------------------------------------------------------------------*/
+
+/****************** Bit definition for OB_RDP register **********************/
+#define OB_RDP_RDP ((uint32_t)0x000000FF) /*!< Read protection option byte */
+#define OB_RDP_nRDP ((uint32_t)0x0000FF00) /*!< Read protection complemented option byte */
+
+/****************** Bit definition for OB_USER register *********************/
+#define OB_USER_USER ((uint32_t)0x00FF0000) /*!< User option byte */
+#define OB_USER_nUSER ((uint32_t)0xFF000000) /*!< User complemented option byte */
+
+/****************** Bit definition for OB_WRP0 register *********************/
+#define OB_WRP0_WRP0 ((uint32_t)0x000000FF) /*!< Flash memory write protection option bytes */
+#define OB_WRP0_nWRP0 ((uint32_t)0x0000FF00) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for OB_WRP1 register *********************/
+#define OB_WRP1_WRP1 ((uint32_t)0x00FF0000) /*!< Flash memory write protection option bytes */
+#define OB_WRP1_nWRP1 ((uint32_t)0xFF000000) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for OB_WRP2 register *********************/
+#define OB_WRP2_WRP2 ((uint32_t)0x000000FF) /*!< Flash memory write protection option bytes */
+#define OB_WRP2_nWRP2 ((uint32_t)0x0000FF00) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for OB_WRP3 register *********************/
+#define OB_WRP3_WRP3 ((uint32_t)0x00FF0000) /*!< Flash memory write protection option bytes */
+#define OB_WRP3_nWRP3 ((uint32_t)0xFF000000) /*!< Flash memory write protection complemented option bytes */
+
+/******************************************************************************/
+/* */
+/* General Purpose IOs (GPIO) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for GPIO_MODER register *****************/
+#define GPIO_MODER_MODER0 ((uint32_t)0x00000003)
+#define GPIO_MODER_MODER0_0 ((uint32_t)0x00000001)
+#define GPIO_MODER_MODER0_1 ((uint32_t)0x00000002)
+#define GPIO_MODER_MODER1 ((uint32_t)0x0000000C)
+#define GPIO_MODER_MODER1_0 ((uint32_t)0x00000004)
+#define GPIO_MODER_MODER1_1 ((uint32_t)0x00000008)
+#define GPIO_MODER_MODER2 ((uint32_t)0x00000030)
+#define GPIO_MODER_MODER2_0 ((uint32_t)0x00000010)
+#define GPIO_MODER_MODER2_1 ((uint32_t)0x00000020)
+#define GPIO_MODER_MODER3 ((uint32_t)0x000000C0)
+#define GPIO_MODER_MODER3_0 ((uint32_t)0x00000040)
+#define GPIO_MODER_MODER3_1 ((uint32_t)0x00000080)
+#define GPIO_MODER_MODER4 ((uint32_t)0x00000300)
+#define GPIO_MODER_MODER4_0 ((uint32_t)0x00000100)
+#define GPIO_MODER_MODER4_1 ((uint32_t)0x00000200)
+#define GPIO_MODER_MODER5 ((uint32_t)0x00000C00)
+#define GPIO_MODER_MODER5_0 ((uint32_t)0x00000400)
+#define GPIO_MODER_MODER5_1 ((uint32_t)0x00000800)
+#define GPIO_MODER_MODER6 ((uint32_t)0x00003000)
+#define GPIO_MODER_MODER6_0 ((uint32_t)0x00001000)
+#define GPIO_MODER_MODER6_1 ((uint32_t)0x00002000)
+#define GPIO_MODER_MODER7 ((uint32_t)0x0000C000)
+#define GPIO_MODER_MODER7_0 ((uint32_t)0x00004000)
+#define GPIO_MODER_MODER7_1 ((uint32_t)0x00008000)
+#define GPIO_MODER_MODER8 ((uint32_t)0x00030000)
+#define GPIO_MODER_MODER8_0 ((uint32_t)0x00010000)
+#define GPIO_MODER_MODER8_1 ((uint32_t)0x00020000)
+#define GPIO_MODER_MODER9 ((uint32_t)0x000C0000)
+#define GPIO_MODER_MODER9_0 ((uint32_t)0x00040000)
+#define GPIO_MODER_MODER9_1 ((uint32_t)0x00080000)
+#define GPIO_MODER_MODER10 ((uint32_t)0x00300000)
+#define GPIO_MODER_MODER10_0 ((uint32_t)0x00100000)
+#define GPIO_MODER_MODER10_1 ((uint32_t)0x00200000)
+#define GPIO_MODER_MODER11 ((uint32_t)0x00C00000)
+#define GPIO_MODER_MODER11_0 ((uint32_t)0x00400000)
+#define GPIO_MODER_MODER11_1 ((uint32_t)0x00800000)
+#define GPIO_MODER_MODER12 ((uint32_t)0x03000000)
+#define GPIO_MODER_MODER12_0 ((uint32_t)0x01000000)
+#define GPIO_MODER_MODER12_1 ((uint32_t)0x02000000)
+#define GPIO_MODER_MODER13 ((uint32_t)0x0C000000)
+#define GPIO_MODER_MODER13_0 ((uint32_t)0x04000000)
+#define GPIO_MODER_MODER13_1 ((uint32_t)0x08000000)
+#define GPIO_MODER_MODER14 ((uint32_t)0x30000000)
+#define GPIO_MODER_MODER14_0 ((uint32_t)0x10000000)
+#define GPIO_MODER_MODER14_1 ((uint32_t)0x20000000)
+#define GPIO_MODER_MODER15 ((uint32_t)0xC0000000)
+#define GPIO_MODER_MODER15_0 ((uint32_t)0x40000000)
+#define GPIO_MODER_MODER15_1 ((uint32_t)0x80000000)
+
+/****************** Bit definition for GPIO_OTYPER register *****************/
+#define GPIO_OTYPER_OT_0 ((uint32_t)0x00000001)
+#define GPIO_OTYPER_OT_1 ((uint32_t)0x00000002)
+#define GPIO_OTYPER_OT_2 ((uint32_t)0x00000004)
+#define GPIO_OTYPER_OT_3 ((uint32_t)0x00000008)
+#define GPIO_OTYPER_OT_4 ((uint32_t)0x00000010)
+#define GPIO_OTYPER_OT_5 ((uint32_t)0x00000020)
+#define GPIO_OTYPER_OT_6 ((uint32_t)0x00000040)
+#define GPIO_OTYPER_OT_7 ((uint32_t)0x00000080)
+#define GPIO_OTYPER_OT_8 ((uint32_t)0x00000100)
+#define GPIO_OTYPER_OT_9 ((uint32_t)0x00000200)
+#define GPIO_OTYPER_OT_10 ((uint32_t)0x00000400)
+#define GPIO_OTYPER_OT_11 ((uint32_t)0x00000800)
+#define GPIO_OTYPER_OT_12 ((uint32_t)0x00001000)
+#define GPIO_OTYPER_OT_13 ((uint32_t)0x00002000)
+#define GPIO_OTYPER_OT_14 ((uint32_t)0x00004000)
+#define GPIO_OTYPER_OT_15 ((uint32_t)0x00008000)
+
+/**************** Bit definition for GPIO_OSPEEDR register ******************/
+#define GPIO_OSPEEDR_OSPEEDR0 ((uint32_t)0x00000003)
+#define GPIO_OSPEEDR_OSPEEDR0_0 ((uint32_t)0x00000001)
+#define GPIO_OSPEEDR_OSPEEDR0_1 ((uint32_t)0x00000002)
+#define GPIO_OSPEEDR_OSPEEDR1 ((uint32_t)0x0000000C)
+#define GPIO_OSPEEDR_OSPEEDR1_0 ((uint32_t)0x00000004)
+#define GPIO_OSPEEDR_OSPEEDR1_1 ((uint32_t)0x00000008)
+#define GPIO_OSPEEDR_OSPEEDR2 ((uint32_t)0x00000030)
+#define GPIO_OSPEEDR_OSPEEDR2_0 ((uint32_t)0x00000010)
+#define GPIO_OSPEEDR_OSPEEDR2_1 ((uint32_t)0x00000020)
+#define GPIO_OSPEEDR_OSPEEDR3 ((uint32_t)0x000000C0)
+#define GPIO_OSPEEDR_OSPEEDR3_0 ((uint32_t)0x00000040)
+#define GPIO_OSPEEDR_OSPEEDR3_1 ((uint32_t)0x00000080)
+#define GPIO_OSPEEDR_OSPEEDR4 ((uint32_t)0x00000300)
+#define GPIO_OSPEEDR_OSPEEDR4_0 ((uint32_t)0x00000100)
+#define GPIO_OSPEEDR_OSPEEDR4_1 ((uint32_t)0x00000200)
+#define GPIO_OSPEEDR_OSPEEDR5 ((uint32_t)0x00000C00)
+#define GPIO_OSPEEDR_OSPEEDR5_0 ((uint32_t)0x00000400)
+#define GPIO_OSPEEDR_OSPEEDR5_1 ((uint32_t)0x00000800)
+#define GPIO_OSPEEDR_OSPEEDR6 ((uint32_t)0x00003000)
+#define GPIO_OSPEEDR_OSPEEDR6_0 ((uint32_t)0x00001000)
+#define GPIO_OSPEEDR_OSPEEDR6_1 ((uint32_t)0x00002000)
+#define GPIO_OSPEEDR_OSPEEDR7 ((uint32_t)0x0000C000)
+#define GPIO_OSPEEDR_OSPEEDR7_0 ((uint32_t)0x00004000)
+#define GPIO_OSPEEDR_OSPEEDR7_1 ((uint32_t)0x00008000)
+#define GPIO_OSPEEDR_OSPEEDR8 ((uint32_t)0x00030000)
+#define GPIO_OSPEEDR_OSPEEDR8_0 ((uint32_t)0x00010000)
+#define GPIO_OSPEEDR_OSPEEDR8_1 ((uint32_t)0x00020000)
+#define GPIO_OSPEEDR_OSPEEDR9 ((uint32_t)0x000C0000)
+#define GPIO_OSPEEDR_OSPEEDR9_0 ((uint32_t)0x00040000)
+#define GPIO_OSPEEDR_OSPEEDR9_1 ((uint32_t)0x00080000)
+#define GPIO_OSPEEDR_OSPEEDR10 ((uint32_t)0x00300000)
+#define GPIO_OSPEEDR_OSPEEDR10_0 ((uint32_t)0x00100000)
+#define GPIO_OSPEEDR_OSPEEDR10_1 ((uint32_t)0x00200000)
+#define GPIO_OSPEEDR_OSPEEDR11 ((uint32_t)0x00C00000)
+#define GPIO_OSPEEDR_OSPEEDR11_0 ((uint32_t)0x00400000)
+#define GPIO_OSPEEDR_OSPEEDR11_1 ((uint32_t)0x00800000)
+#define GPIO_OSPEEDR_OSPEEDR12 ((uint32_t)0x03000000)
+#define GPIO_OSPEEDR_OSPEEDR12_0 ((uint32_t)0x01000000)
+#define GPIO_OSPEEDR_OSPEEDR12_1 ((uint32_t)0x02000000)
+#define GPIO_OSPEEDR_OSPEEDR13 ((uint32_t)0x0C000000)
+#define GPIO_OSPEEDR_OSPEEDR13_0 ((uint32_t)0x04000000)
+#define GPIO_OSPEEDR_OSPEEDR13_1 ((uint32_t)0x08000000)
+#define GPIO_OSPEEDR_OSPEEDR14 ((uint32_t)0x30000000)
+#define GPIO_OSPEEDR_OSPEEDR14_0 ((uint32_t)0x10000000)
+#define GPIO_OSPEEDR_OSPEEDR14_1 ((uint32_t)0x20000000)
+#define GPIO_OSPEEDR_OSPEEDR15 ((uint32_t)0xC0000000)
+#define GPIO_OSPEEDR_OSPEEDR15_0 ((uint32_t)0x40000000)
+#define GPIO_OSPEEDR_OSPEEDR15_1 ((uint32_t)0x80000000)
+
+/* Old Bit definition for GPIO_OSPEEDR register maintained for legacy purpose */
+#define GPIO_OSPEEDER_OSPEEDR0 GPIO_OSPEEDR_OSPEEDR0
+#define GPIO_OSPEEDER_OSPEEDR0_0 GPIO_OSPEEDR_OSPEEDR0_0
+#define GPIO_OSPEEDER_OSPEEDR0_1 GPIO_OSPEEDR_OSPEEDR0_1
+#define GPIO_OSPEEDER_OSPEEDR1 GPIO_OSPEEDR_OSPEEDR1
+#define GPIO_OSPEEDER_OSPEEDR1_0 GPIO_OSPEEDR_OSPEEDR1_0
+#define GPIO_OSPEEDER_OSPEEDR1_1 GPIO_OSPEEDR_OSPEEDR1_1
+#define GPIO_OSPEEDER_OSPEEDR2 GPIO_OSPEEDR_OSPEEDR2
+#define GPIO_OSPEEDER_OSPEEDR2_0 GPIO_OSPEEDR_OSPEEDR2_0
+#define GPIO_OSPEEDER_OSPEEDR2_1 GPIO_OSPEEDR_OSPEEDR2_1
+#define GPIO_OSPEEDER_OSPEEDR3 GPIO_OSPEEDR_OSPEEDR3
+#define GPIO_OSPEEDER_OSPEEDR3_0 GPIO_OSPEEDR_OSPEEDR3_0
+#define GPIO_OSPEEDER_OSPEEDR3_1 GPIO_OSPEEDR_OSPEEDR3_1
+#define GPIO_OSPEEDER_OSPEEDR4 GPIO_OSPEEDR_OSPEEDR4
+#define GPIO_OSPEEDER_OSPEEDR4_0 GPIO_OSPEEDR_OSPEEDR4_0
+#define GPIO_OSPEEDER_OSPEEDR4_1 GPIO_OSPEEDR_OSPEEDR4_1
+#define GPIO_OSPEEDER_OSPEEDR5 GPIO_OSPEEDR_OSPEEDR5
+#define GPIO_OSPEEDER_OSPEEDR5_0 GPIO_OSPEEDR_OSPEEDR5_0
+#define GPIO_OSPEEDER_OSPEEDR5_1 GPIO_OSPEEDR_OSPEEDR5_1
+#define GPIO_OSPEEDER_OSPEEDR6 GPIO_OSPEEDR_OSPEEDR6
+#define GPIO_OSPEEDER_OSPEEDR6_0 GPIO_OSPEEDR_OSPEEDR6_0
+#define GPIO_OSPEEDER_OSPEEDR6_1 GPIO_OSPEEDR_OSPEEDR6_1
+#define GPIO_OSPEEDER_OSPEEDR7 GPIO_OSPEEDR_OSPEEDR7
+#define GPIO_OSPEEDER_OSPEEDR7_0 GPIO_OSPEEDR_OSPEEDR7_0
+#define GPIO_OSPEEDER_OSPEEDR7_1 GPIO_OSPEEDR_OSPEEDR7_1
+#define GPIO_OSPEEDER_OSPEEDR8 GPIO_OSPEEDR_OSPEEDR8
+#define GPIO_OSPEEDER_OSPEEDR8_0 GPIO_OSPEEDR_OSPEEDR8_0
+#define GPIO_OSPEEDER_OSPEEDR8_1 GPIO_OSPEEDR_OSPEEDR8_1
+#define GPIO_OSPEEDER_OSPEEDR9 GPIO_OSPEEDR_OSPEEDR9
+#define GPIO_OSPEEDER_OSPEEDR9_0 GPIO_OSPEEDR_OSPEEDR9_0
+#define GPIO_OSPEEDER_OSPEEDR9_1 GPIO_OSPEEDR_OSPEEDR9_1
+#define GPIO_OSPEEDER_OSPEEDR10 GPIO_OSPEEDR_OSPEEDR10
+#define GPIO_OSPEEDER_OSPEEDR10_0 GPIO_OSPEEDR_OSPEEDR10_0
+#define GPIO_OSPEEDER_OSPEEDR10_1 GPIO_OSPEEDR_OSPEEDR10_1
+#define GPIO_OSPEEDER_OSPEEDR11 GPIO_OSPEEDR_OSPEEDR11
+#define GPIO_OSPEEDER_OSPEEDR11_0 GPIO_OSPEEDR_OSPEEDR11_0
+#define GPIO_OSPEEDER_OSPEEDR11_1 GPIO_OSPEEDR_OSPEEDR11_1
+#define GPIO_OSPEEDER_OSPEEDR12 GPIO_OSPEEDR_OSPEEDR12
+#define GPIO_OSPEEDER_OSPEEDR12_0 GPIO_OSPEEDR_OSPEEDR12_0
+#define GPIO_OSPEEDER_OSPEEDR12_1 GPIO_OSPEEDR_OSPEEDR12_1
+#define GPIO_OSPEEDER_OSPEEDR13 GPIO_OSPEEDR_OSPEEDR13
+#define GPIO_OSPEEDER_OSPEEDR13_0 GPIO_OSPEEDR_OSPEEDR13_0
+#define GPIO_OSPEEDER_OSPEEDR13_1 GPIO_OSPEEDR_OSPEEDR13_1
+#define GPIO_OSPEEDER_OSPEEDR14 GPIO_OSPEEDR_OSPEEDR14
+#define GPIO_OSPEEDER_OSPEEDR14_0 GPIO_OSPEEDR_OSPEEDR14_0
+#define GPIO_OSPEEDER_OSPEEDR14_1 GPIO_OSPEEDR_OSPEEDR14_1
+#define GPIO_OSPEEDER_OSPEEDR15 GPIO_OSPEEDR_OSPEEDR15
+#define GPIO_OSPEEDER_OSPEEDR15_0 GPIO_OSPEEDR_OSPEEDR15_0
+#define GPIO_OSPEEDER_OSPEEDR15_1 GPIO_OSPEEDR_OSPEEDR15_1
+
+/******************* Bit definition for GPIO_PUPDR register ******************/
+#define GPIO_PUPDR_PUPDR0 ((uint32_t)0x00000003)
+#define GPIO_PUPDR_PUPDR0_0 ((uint32_t)0x00000001)
+#define GPIO_PUPDR_PUPDR0_1 ((uint32_t)0x00000002)
+#define GPIO_PUPDR_PUPDR1 ((uint32_t)0x0000000C)
+#define GPIO_PUPDR_PUPDR1_0 ((uint32_t)0x00000004)
+#define GPIO_PUPDR_PUPDR1_1 ((uint32_t)0x00000008)
+#define GPIO_PUPDR_PUPDR2 ((uint32_t)0x00000030)
+#define GPIO_PUPDR_PUPDR2_0 ((uint32_t)0x00000010)
+#define GPIO_PUPDR_PUPDR2_1 ((uint32_t)0x00000020)
+#define GPIO_PUPDR_PUPDR3 ((uint32_t)0x000000C0)
+#define GPIO_PUPDR_PUPDR3_0 ((uint32_t)0x00000040)
+#define GPIO_PUPDR_PUPDR3_1 ((uint32_t)0x00000080)
+#define GPIO_PUPDR_PUPDR4 ((uint32_t)0x00000300)
+#define GPIO_PUPDR_PUPDR4_0 ((uint32_t)0x00000100)
+#define GPIO_PUPDR_PUPDR4_1 ((uint32_t)0x00000200)
+#define GPIO_PUPDR_PUPDR5 ((uint32_t)0x00000C00)
+#define GPIO_PUPDR_PUPDR5_0 ((uint32_t)0x00000400)
+#define GPIO_PUPDR_PUPDR5_1 ((uint32_t)0x00000800)
+#define GPIO_PUPDR_PUPDR6 ((uint32_t)0x00003000)
+#define GPIO_PUPDR_PUPDR6_0 ((uint32_t)0x00001000)
+#define GPIO_PUPDR_PUPDR6_1 ((uint32_t)0x00002000)
+#define GPIO_PUPDR_PUPDR7 ((uint32_t)0x0000C000)
+#define GPIO_PUPDR_PUPDR7_0 ((uint32_t)0x00004000)
+#define GPIO_PUPDR_PUPDR7_1 ((uint32_t)0x00008000)
+#define GPIO_PUPDR_PUPDR8 ((uint32_t)0x00030000)
+#define GPIO_PUPDR_PUPDR8_0 ((uint32_t)0x00010000)
+#define GPIO_PUPDR_PUPDR8_1 ((uint32_t)0x00020000)
+#define GPIO_PUPDR_PUPDR9 ((uint32_t)0x000C0000)
+#define GPIO_PUPDR_PUPDR9_0 ((uint32_t)0x00040000)
+#define GPIO_PUPDR_PUPDR9_1 ((uint32_t)0x00080000)
+#define GPIO_PUPDR_PUPDR10 ((uint32_t)0x00300000)
+#define GPIO_PUPDR_PUPDR10_0 ((uint32_t)0x00100000)
+#define GPIO_PUPDR_PUPDR10_1 ((uint32_t)0x00200000)
+#define GPIO_PUPDR_PUPDR11 ((uint32_t)0x00C00000)
+#define GPIO_PUPDR_PUPDR11_0 ((uint32_t)0x00400000)
+#define GPIO_PUPDR_PUPDR11_1 ((uint32_t)0x00800000)
+#define GPIO_PUPDR_PUPDR12 ((uint32_t)0x03000000)
+#define GPIO_PUPDR_PUPDR12_0 ((uint32_t)0x01000000)
+#define GPIO_PUPDR_PUPDR12_1 ((uint32_t)0x02000000)
+#define GPIO_PUPDR_PUPDR13 ((uint32_t)0x0C000000)
+#define GPIO_PUPDR_PUPDR13_0 ((uint32_t)0x04000000)
+#define GPIO_PUPDR_PUPDR13_1 ((uint32_t)0x08000000)
+#define GPIO_PUPDR_PUPDR14 ((uint32_t)0x30000000)
+#define GPIO_PUPDR_PUPDR14_0 ((uint32_t)0x10000000)
+#define GPIO_PUPDR_PUPDR14_1 ((uint32_t)0x20000000)
+#define GPIO_PUPDR_PUPDR15 ((uint32_t)0xC0000000)
+#define GPIO_PUPDR_PUPDR15_0 ((uint32_t)0x40000000)
+#define GPIO_PUPDR_PUPDR15_1 ((uint32_t)0x80000000)
+
+/******************* Bit definition for GPIO_IDR register *******************/
+#define GPIO_IDR_0 ((uint32_t)0x00000001)
+#define GPIO_IDR_1 ((uint32_t)0x00000002)
+#define GPIO_IDR_2 ((uint32_t)0x00000004)
+#define GPIO_IDR_3 ((uint32_t)0x00000008)
+#define GPIO_IDR_4 ((uint32_t)0x00000010)
+#define GPIO_IDR_5 ((uint32_t)0x00000020)
+#define GPIO_IDR_6 ((uint32_t)0x00000040)
+#define GPIO_IDR_7 ((uint32_t)0x00000080)
+#define GPIO_IDR_8 ((uint32_t)0x00000100)
+#define GPIO_IDR_9 ((uint32_t)0x00000200)
+#define GPIO_IDR_10 ((uint32_t)0x00000400)
+#define GPIO_IDR_11 ((uint32_t)0x00000800)
+#define GPIO_IDR_12 ((uint32_t)0x00001000)
+#define GPIO_IDR_13 ((uint32_t)0x00002000)
+#define GPIO_IDR_14 ((uint32_t)0x00004000)
+#define GPIO_IDR_15 ((uint32_t)0x00008000)
+
+/****************** Bit definition for GPIO_ODR register ********************/
+#define GPIO_ODR_0 ((uint32_t)0x00000001)
+#define GPIO_ODR_1 ((uint32_t)0x00000002)
+#define GPIO_ODR_2 ((uint32_t)0x00000004)
+#define GPIO_ODR_3 ((uint32_t)0x00000008)
+#define GPIO_ODR_4 ((uint32_t)0x00000010)
+#define GPIO_ODR_5 ((uint32_t)0x00000020)
+#define GPIO_ODR_6 ((uint32_t)0x00000040)
+#define GPIO_ODR_7 ((uint32_t)0x00000080)
+#define GPIO_ODR_8 ((uint32_t)0x00000100)
+#define GPIO_ODR_9 ((uint32_t)0x00000200)
+#define GPIO_ODR_10 ((uint32_t)0x00000400)
+#define GPIO_ODR_11 ((uint32_t)0x00000800)
+#define GPIO_ODR_12 ((uint32_t)0x00001000)
+#define GPIO_ODR_13 ((uint32_t)0x00002000)
+#define GPIO_ODR_14 ((uint32_t)0x00004000)
+#define GPIO_ODR_15 ((uint32_t)0x00008000)
+
+/****************** Bit definition for GPIO_BSRR register ********************/
+#define GPIO_BSRR_BS_0 ((uint32_t)0x00000001)
+#define GPIO_BSRR_BS_1 ((uint32_t)0x00000002)
+#define GPIO_BSRR_BS_2 ((uint32_t)0x00000004)
+#define GPIO_BSRR_BS_3 ((uint32_t)0x00000008)
+#define GPIO_BSRR_BS_4 ((uint32_t)0x00000010)
+#define GPIO_BSRR_BS_5 ((uint32_t)0x00000020)
+#define GPIO_BSRR_BS_6 ((uint32_t)0x00000040)
+#define GPIO_BSRR_BS_7 ((uint32_t)0x00000080)
+#define GPIO_BSRR_BS_8 ((uint32_t)0x00000100)
+#define GPIO_BSRR_BS_9 ((uint32_t)0x00000200)
+#define GPIO_BSRR_BS_10 ((uint32_t)0x00000400)
+#define GPIO_BSRR_BS_11 ((uint32_t)0x00000800)
+#define GPIO_BSRR_BS_12 ((uint32_t)0x00001000)
+#define GPIO_BSRR_BS_13 ((uint32_t)0x00002000)
+#define GPIO_BSRR_BS_14 ((uint32_t)0x00004000)
+#define GPIO_BSRR_BS_15 ((uint32_t)0x00008000)
+#define GPIO_BSRR_BR_0 ((uint32_t)0x00010000)
+#define GPIO_BSRR_BR_1 ((uint32_t)0x00020000)
+#define GPIO_BSRR_BR_2 ((uint32_t)0x00040000)
+#define GPIO_BSRR_BR_3 ((uint32_t)0x00080000)
+#define GPIO_BSRR_BR_4 ((uint32_t)0x00100000)
+#define GPIO_BSRR_BR_5 ((uint32_t)0x00200000)
+#define GPIO_BSRR_BR_6 ((uint32_t)0x00400000)
+#define GPIO_BSRR_BR_7 ((uint32_t)0x00800000)
+#define GPIO_BSRR_BR_8 ((uint32_t)0x01000000)
+#define GPIO_BSRR_BR_9 ((uint32_t)0x02000000)
+#define GPIO_BSRR_BR_10 ((uint32_t)0x04000000)
+#define GPIO_BSRR_BR_11 ((uint32_t)0x08000000)
+#define GPIO_BSRR_BR_12 ((uint32_t)0x10000000)
+#define GPIO_BSRR_BR_13 ((uint32_t)0x20000000)
+#define GPIO_BSRR_BR_14 ((uint32_t)0x40000000)
+#define GPIO_BSRR_BR_15 ((uint32_t)0x80000000)
+
+/****************** Bit definition for GPIO_LCKR register ********************/
+#define GPIO_LCKR_LCK0 ((uint32_t)0x00000001)
+#define GPIO_LCKR_LCK1 ((uint32_t)0x00000002)
+#define GPIO_LCKR_LCK2 ((uint32_t)0x00000004)
+#define GPIO_LCKR_LCK3 ((uint32_t)0x00000008)
+#define GPIO_LCKR_LCK4 ((uint32_t)0x00000010)
+#define GPIO_LCKR_LCK5 ((uint32_t)0x00000020)
+#define GPIO_LCKR_LCK6 ((uint32_t)0x00000040)
+#define GPIO_LCKR_LCK7 ((uint32_t)0x00000080)
+#define GPIO_LCKR_LCK8 ((uint32_t)0x00000100)
+#define GPIO_LCKR_LCK9 ((uint32_t)0x00000200)
+#define GPIO_LCKR_LCK10 ((uint32_t)0x00000400)
+#define GPIO_LCKR_LCK11 ((uint32_t)0x00000800)
+#define GPIO_LCKR_LCK12 ((uint32_t)0x00001000)
+#define GPIO_LCKR_LCK13 ((uint32_t)0x00002000)
+#define GPIO_LCKR_LCK14 ((uint32_t)0x00004000)
+#define GPIO_LCKR_LCK15 ((uint32_t)0x00008000)
+#define GPIO_LCKR_LCKK ((uint32_t)0x00010000)
+
+/****************** Bit definition for GPIO_AFRL register ********************/
+#define GPIO_AFRL_AFRL0 ((uint32_t)0x0000000F)
+#define GPIO_AFRL_AFRL1 ((uint32_t)0x000000F0)
+#define GPIO_AFRL_AFRL2 ((uint32_t)0x00000F00)
+#define GPIO_AFRL_AFRL3 ((uint32_t)0x0000F000)
+#define GPIO_AFRL_AFRL4 ((uint32_t)0x000F0000)
+#define GPIO_AFRL_AFRL5 ((uint32_t)0x00F00000)
+#define GPIO_AFRL_AFRL6 ((uint32_t)0x0F000000)
+#define GPIO_AFRL_AFRL7 ((uint32_t)0xF0000000)
+
+/****************** Bit definition for GPIO_AFRH register ********************/
+#define GPIO_AFRH_AFRH0 ((uint32_t)0x0000000F)
+#define GPIO_AFRH_AFRH1 ((uint32_t)0x000000F0)
+#define GPIO_AFRH_AFRH2 ((uint32_t)0x00000F00)
+#define GPIO_AFRH_AFRH3 ((uint32_t)0x0000F000)
+#define GPIO_AFRH_AFRH4 ((uint32_t)0x000F0000)
+#define GPIO_AFRH_AFRH5 ((uint32_t)0x00F00000)
+#define GPIO_AFRH_AFRH6 ((uint32_t)0x0F000000)
+#define GPIO_AFRH_AFRH7 ((uint32_t)0xF0000000)
+
+/****************** Bit definition for GPIO_BRR register *********************/
+#define GPIO_BRR_BR_0 ((uint32_t)0x00000001)
+#define GPIO_BRR_BR_1 ((uint32_t)0x00000002)
+#define GPIO_BRR_BR_2 ((uint32_t)0x00000004)
+#define GPIO_BRR_BR_3 ((uint32_t)0x00000008)
+#define GPIO_BRR_BR_4 ((uint32_t)0x00000010)
+#define GPIO_BRR_BR_5 ((uint32_t)0x00000020)
+#define GPIO_BRR_BR_6 ((uint32_t)0x00000040)
+#define GPIO_BRR_BR_7 ((uint32_t)0x00000080)
+#define GPIO_BRR_BR_8 ((uint32_t)0x00000100)
+#define GPIO_BRR_BR_9 ((uint32_t)0x00000200)
+#define GPIO_BRR_BR_10 ((uint32_t)0x00000400)
+#define GPIO_BRR_BR_11 ((uint32_t)0x00000800)
+#define GPIO_BRR_BR_12 ((uint32_t)0x00001000)
+#define GPIO_BRR_BR_13 ((uint32_t)0x00002000)
+#define GPIO_BRR_BR_14 ((uint32_t)0x00004000)
+#define GPIO_BRR_BR_15 ((uint32_t)0x00008000)
+
+/******************************************************************************/
+/* */
+/* Inter-integrated Circuit Interface (I2C) */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for I2C_CR1 register *******************/
+#define I2C_CR1_PE ((uint32_t)0x00000001) /*!< Peripheral enable */
+#define I2C_CR1_TXIE ((uint32_t)0x00000002) /*!< TX interrupt enable */
+#define I2C_CR1_RXIE ((uint32_t)0x00000004) /*!< RX interrupt enable */
+#define I2C_CR1_ADDRIE ((uint32_t)0x00000008) /*!< Address match interrupt enable */
+#define I2C_CR1_NACKIE ((uint32_t)0x00000010) /*!< NACK received interrupt enable */
+#define I2C_CR1_STOPIE ((uint32_t)0x00000020) /*!< STOP detection interrupt enable */
+#define I2C_CR1_TCIE ((uint32_t)0x00000040) /*!< Transfer complete interrupt enable */
+#define I2C_CR1_ERRIE ((uint32_t)0x00000080) /*!< Errors interrupt enable */
+#define I2C_CR1_DFN ((uint32_t)0x00000F00) /*!< Digital noise filter */
+#define I2C_CR1_ANFOFF ((uint32_t)0x00001000) /*!< Analog noise filter OFF */
+#define I2C_CR1_SWRST ((uint32_t)0x00002000) /*!< Software reset */
+#define I2C_CR1_TXDMAEN ((uint32_t)0x00004000) /*!< DMA transmission requests enable */
+#define I2C_CR1_RXDMAEN ((uint32_t)0x00008000) /*!< DMA reception requests enable */
+#define I2C_CR1_SBC ((uint32_t)0x00010000) /*!< Slave byte control */
+#define I2C_CR1_NOSTRETCH ((uint32_t)0x00020000) /*!< Clock stretching disable */
+#define I2C_CR1_GCEN ((uint32_t)0x00080000) /*!< General call enable */
+#define I2C_CR1_SMBHEN ((uint32_t)0x00100000) /*!< SMBus host address enable */
+#define I2C_CR1_SMBDEN ((uint32_t)0x00200000) /*!< SMBus device default address enable */
+#define I2C_CR1_ALERTEN ((uint32_t)0x00400000) /*!< SMBus alert enable */
+#define I2C_CR1_PECEN ((uint32_t)0x00800000) /*!< PEC enable */
+
+/****************** Bit definition for I2C_CR2 register ********************/
+#define I2C_CR2_SADD ((uint32_t)0x000003FF) /*!< Slave address (master mode) */
+#define I2C_CR2_RD_WRN ((uint32_t)0x00000400) /*!< Transfer direction (master mode) */
+#define I2C_CR2_ADD10 ((uint32_t)0x00000800) /*!< 10-bit addressing mode (master mode) */
+#define I2C_CR2_HEAD10R ((uint32_t)0x00001000) /*!< 10-bit address header only read direction (master mode) */
+#define I2C_CR2_START ((uint32_t)0x00002000) /*!< START generation */
+#define I2C_CR2_STOP ((uint32_t)0x00004000) /*!< STOP generation (master mode) */
+#define I2C_CR2_NACK ((uint32_t)0x00008000) /*!< NACK generation (slave mode) */
+#define I2C_CR2_NBYTES ((uint32_t)0x00FF0000) /*!< Number of bytes */
+#define I2C_CR2_RELOAD ((uint32_t)0x01000000) /*!< NBYTES reload mode */
+#define I2C_CR2_AUTOEND ((uint32_t)0x02000000) /*!< Automatic end mode (master mode) */
+#define I2C_CR2_PECBYTE ((uint32_t)0x04000000) /*!< Packet error checking byte */
+
+/******************* Bit definition for I2C_OAR1 register ******************/
+#define I2C_OAR1_OA1 ((uint32_t)0x000003FF) /*!< Interface own address 1 */
+#define I2C_OAR1_OA1MODE ((uint32_t)0x00000400) /*!< Own address 1 10-bit mode */
+#define I2C_OAR1_OA1EN ((uint32_t)0x00008000) /*!< Own address 1 enable */
+
+/******************* Bit definition for I2C_OAR2 register ******************/
+#define I2C_OAR2_OA2 ((uint32_t)0x000000FE) /*!< Interface own address 2 */
+#define I2C_OAR2_OA2MSK ((uint32_t)0x00000700) /*!< Own address 2 masks */
+#define I2C_OAR2_OA2EN ((uint32_t)0x00008000) /*!< Own address 2 enable */
+
+/******************* Bit definition for I2C_TIMINGR register ****************/
+#define I2C_TIMINGR_SCLL ((uint32_t)0x000000FF) /*!< SCL low period (master mode) */
+#define I2C_TIMINGR_SCLH ((uint32_t)0x0000FF00) /*!< SCL high period (master mode) */
+#define I2C_TIMINGR_SDADEL ((uint32_t)0x000F0000) /*!< Data hold time */
+#define I2C_TIMINGR_SCLDEL ((uint32_t)0x00F00000) /*!< Data setup time */
+#define I2C_TIMINGR_PRESC ((uint32_t)0xF0000000) /*!< Timings prescaler */
+
+/******************* Bit definition for I2C_TIMEOUTR register ****************/
+#define I2C_TIMEOUTR_TIMEOUTA ((uint32_t)0x00000FFF) /*!< Bus timeout A */
+#define I2C_TIMEOUTR_TIDLE ((uint32_t)0x00001000) /*!< Idle clock timeout detection */
+#define I2C_TIMEOUTR_TIMOUTEN ((uint32_t)0x00008000) /*!< Clock timeout enable */
+#define I2C_TIMEOUTR_TIMEOUTB ((uint32_t)0x0FFF0000) /*!< Bus timeout B*/
+#define I2C_TIMEOUTR_TEXTEN ((uint32_t)0x80000000) /*!< Extended clock timeout enable */
+
+/****************** Bit definition for I2C_ISR register ********************/
+#define I2C_ISR_TXE ((uint32_t)0x00000001) /*!< Transmit data register empty */
+#define I2C_ISR_TXIS ((uint32_t)0x00000002) /*!< Transmit interrupt status */
+#define I2C_ISR_RXNE ((uint32_t)0x00000004) /*!< Receive data register not empty */
+#define I2C_ISR_ADDR ((uint32_t)0x00000008) /*!< Address matched (slave mode)*/
+#define I2C_ISR_NACKF ((uint32_t)0x00000010) /*!< NACK received flag */
+#define I2C_ISR_STOPF ((uint32_t)0x00000020) /*!< STOP detection flag */
+#define I2C_ISR_TC ((uint32_t)0x00000040) /*!< Transfer complete (master mode) */
+#define I2C_ISR_TCR ((uint32_t)0x00000080) /*!< Transfer complete reload */
+#define I2C_ISR_BERR ((uint32_t)0x00000100) /*!< Bus error */
+#define I2C_ISR_ARLO ((uint32_t)0x00000200) /*!< Arbitration lost */
+#define I2C_ISR_OVR ((uint32_t)0x00000400) /*!< Overrun/Underrun */
+#define I2C_ISR_PECERR ((uint32_t)0x00000800) /*!< PEC error in reception */
+#define I2C_ISR_TIMEOUT ((uint32_t)0x00001000) /*!< Timeout or Tlow detection flag */
+#define I2C_ISR_ALERT ((uint32_t)0x00002000) /*!< SMBus alert */
+#define I2C_ISR_BUSY ((uint32_t)0x00008000) /*!< Bus busy */
+#define I2C_ISR_DIR ((uint32_t)0x00010000) /*!< Transfer direction (slave mode) */
+#define I2C_ISR_ADDCODE ((uint32_t)0x00FE0000) /*!< Address match code (slave mode) */
+
+/****************** Bit definition for I2C_ICR register ********************/
+#define I2C_ICR_ADDRCF ((uint32_t)0x00000008) /*!< Address matched clear flag */
+#define I2C_ICR_NACKCF ((uint32_t)0x00000010) /*!< NACK clear flag */
+#define I2C_ICR_STOPCF ((uint32_t)0x00000020) /*!< STOP detection clear flag */
+#define I2C_ICR_BERRCF ((uint32_t)0x00000100) /*!< Bus error clear flag */
+#define I2C_ICR_ARLOCF ((uint32_t)0x00000200) /*!< Arbitration lost clear flag */
+#define I2C_ICR_OVRCF ((uint32_t)0x00000400) /*!< Overrun/Underrun clear flag */
+#define I2C_ICR_PECCF ((uint32_t)0x00000800) /*!< PAC error clear flag */
+#define I2C_ICR_TIMOUTCF ((uint32_t)0x00001000) /*!< Timeout clear flag */
+#define I2C_ICR_ALERTCF ((uint32_t)0x00002000) /*!< Alert clear flag */
+
+/****************** Bit definition for I2C_PECR register *******************/
+#define I2C_PECR_PEC ((uint32_t)0x000000FF) /*!< PEC register */
+
+/****************** Bit definition for I2C_RXDR register *********************/
+#define I2C_RXDR_RXDATA ((uint32_t)0x000000FF) /*!< 8-bit receive data */
+
+/****************** Bit definition for I2C_TXDR register *******************/
+#define I2C_TXDR_TXDATA ((uint32_t)0x000000FF) /*!< 8-bit transmit data */
+
+/*****************************************************************************/
+/* */
+/* Independent WATCHDOG (IWDG) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for IWDG_KR register *******************/
+#define IWDG_KR_KEY ((uint32_t)0xFFFF) /*!< Key value (write only, read 0000h) */
+
+/******************* Bit definition for IWDG_PR register *******************/
+#define IWDG_PR_PR ((uint32_t)0x07) /*!< PR[2:0] (Prescaler divider) */
+#define IWDG_PR_PR_0 ((uint32_t)0x01) /*!< Bit 0 */
+#define IWDG_PR_PR_1 ((uint32_t)0x02) /*!< Bit 1 */
+#define IWDG_PR_PR_2 ((uint32_t)0x04) /*!< Bit 2 */
+
+/******************* Bit definition for IWDG_RLR register ******************/
+#define IWDG_RLR_RL ((uint32_t)0x0FFF) /*!< Watchdog counter reload value */
+
+/******************* Bit definition for IWDG_SR register *******************/
+#define IWDG_SR_PVU ((uint32_t)0x01) /*!< Watchdog prescaler value update */
+#define IWDG_SR_RVU ((uint32_t)0x02) /*!< Watchdog counter reload value update */
+#define IWDG_SR_WVU ((uint32_t)0x04) /*!< Watchdog counter window value update */
+
+/******************* Bit definition for IWDG_KR register *******************/
+#define IWDG_WINR_WIN ((uint32_t)0x0FFF) /*!< Watchdog counter window value */
+
+/*****************************************************************************/
+/* */
+/* Power Control (PWR) */
+/* */
+/*****************************************************************************/
+
+/******************** Bit definition for PWR_CR register *******************/
+#define PWR_CR_LPDS ((uint32_t)0x00000001) /*!< Low-power Deepsleep */
+#define PWR_CR_PDDS ((uint32_t)0x00000002) /*!< Power Down Deepsleep */
+#define PWR_CR_CWUF ((uint32_t)0x00000004) /*!< Clear Wakeup Flag */
+#define PWR_CR_CSBF ((uint32_t)0x00000008) /*!< Clear Standby Flag */
+#define PWR_CR_DBP ((uint32_t)0x00000100) /*!< Disable Backup Domain write protection */
+
+/******************* Bit definition for PWR_CSR register *******************/
+#define PWR_CSR_WUF ((uint32_t)0x00000001) /*!< Wakeup Flag */
+#define PWR_CSR_SBF ((uint32_t)0x00000002) /*!< Standby Flag */
+
+#define PWR_CSR_EWUP1 ((uint32_t)0x00000100) /*!< Enable WKUP pin 1 */
+#define PWR_CSR_EWUP2 ((uint32_t)0x00000200) /*!< Enable WKUP pin 2 */
+#define PWR_CSR_EWUP4 ((uint32_t)0x00000800) /*!< Enable WKUP pin 4 */
+#define PWR_CSR_EWUP5 ((uint32_t)0x00001000) /*!< Enable WKUP pin 5 */
+#define PWR_CSR_EWUP6 ((uint32_t)0x00002000) /*!< Enable WKUP pin 6 */
+#define PWR_CSR_EWUP7 ((uint32_t)0x00004000) /*!< Enable WKUP pin 7 */
+
+/*****************************************************************************/
+/* */
+/* Reset and Clock Control */
+/* */
+/*****************************************************************************/
+
+/******************** Bit definition for RCC_CR register *******************/
+#define RCC_CR_HSION ((uint32_t)0x00000001) /*!< Internal High Speed clock enable */
+#define RCC_CR_HSIRDY ((uint32_t)0x00000002) /*!< Internal High Speed clock ready flag */
+
+#define RCC_CR_HSITRIM ((uint32_t)0x000000F8) /*!< Internal High Speed clock trimming */
+#define RCC_CR_HSITRIM_0 ((uint32_t)0x00000008) /*!<Bit 0 */
+#define RCC_CR_HSITRIM_1 ((uint32_t)0x00000010) /*!<Bit 1 */
+#define RCC_CR_HSITRIM_2 ((uint32_t)0x00000020) /*!<Bit 2 */
+#define RCC_CR_HSITRIM_3 ((uint32_t)0x00000040) /*!<Bit 3 */
+#define RCC_CR_HSITRIM_4 ((uint32_t)0x00000080) /*!<Bit 4 */
+
+#define RCC_CR_HSICAL ((uint32_t)0x0000FF00) /*!< Internal High Speed clock Calibration */
+#define RCC_CR_HSICAL_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define RCC_CR_HSICAL_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define RCC_CR_HSICAL_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define RCC_CR_HSICAL_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define RCC_CR_HSICAL_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+#define RCC_CR_HSICAL_5 ((uint32_t)0x00002000) /*!<Bit 5 */
+#define RCC_CR_HSICAL_6 ((uint32_t)0x00004000) /*!<Bit 6 */
+#define RCC_CR_HSICAL_7 ((uint32_t)0x00008000) /*!<Bit 7 */
+
+#define RCC_CR_HSEON ((uint32_t)0x00010000) /*!< External High Speed clock enable */
+#define RCC_CR_HSERDY ((uint32_t)0x00020000) /*!< External High Speed clock ready flag */
+#define RCC_CR_HSEBYP ((uint32_t)0x00040000) /*!< External High Speed clock Bypass */
+#define RCC_CR_CSSON ((uint32_t)0x00080000) /*!< Clock Security System enable */
+#define RCC_CR_PLLON ((uint32_t)0x01000000) /*!< PLL enable */
+#define RCC_CR_PLLRDY ((uint32_t)0x02000000) /*!< PLL clock ready flag */
+
+/******************** Bit definition for RCC_CFGR register *****************/
+/*!< SW configuration */
+#define RCC_CFGR_SW ((uint32_t)0x00000003) /*!< SW[1:0] bits (System clock Switch) */
+#define RCC_CFGR_SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR_SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+#define RCC_CFGR_SW_HSI ((uint32_t)0x00000000) /*!< HSI selected as system clock */
+#define RCC_CFGR_SW_HSE ((uint32_t)0x00000001) /*!< HSE selected as system clock */
+#define RCC_CFGR_SW_PLL ((uint32_t)0x00000002) /*!< PLL selected as system clock */
+
+/*!< SWS configuration */
+#define RCC_CFGR_SWS ((uint32_t)0x0000000C) /*!< SWS[1:0] bits (System Clock Switch Status) */
+#define RCC_CFGR_SWS_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define RCC_CFGR_SWS_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+
+#define RCC_CFGR_SWS_HSI ((uint32_t)0x00000000) /*!< HSI oscillator used as system clock */
+#define RCC_CFGR_SWS_HSE ((uint32_t)0x00000004) /*!< HSE oscillator used as system clock */
+#define RCC_CFGR_SWS_PLL ((uint32_t)0x00000008) /*!< PLL used as system clock */
+
+/*!< HPRE configuration */
+#define RCC_CFGR_HPRE ((uint32_t)0x000000F0) /*!< HPRE[3:0] bits (AHB prescaler) */
+#define RCC_CFGR_HPRE_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define RCC_CFGR_HPRE_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define RCC_CFGR_HPRE_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+#define RCC_CFGR_HPRE_3 ((uint32_t)0x00000080) /*!< Bit 3 */
+
+#define RCC_CFGR_HPRE_DIV1 ((uint32_t)0x00000000) /*!< SYSCLK not divided */
+#define RCC_CFGR_HPRE_DIV2 ((uint32_t)0x00000080) /*!< SYSCLK divided by 2 */
+#define RCC_CFGR_HPRE_DIV4 ((uint32_t)0x00000090) /*!< SYSCLK divided by 4 */
+#define RCC_CFGR_HPRE_DIV8 ((uint32_t)0x000000A0) /*!< SYSCLK divided by 8 */
+#define RCC_CFGR_HPRE_DIV16 ((uint32_t)0x000000B0) /*!< SYSCLK divided by 16 */
+#define RCC_CFGR_HPRE_DIV64 ((uint32_t)0x000000C0) /*!< SYSCLK divided by 64 */
+#define RCC_CFGR_HPRE_DIV128 ((uint32_t)0x000000D0) /*!< SYSCLK divided by 128 */
+#define RCC_CFGR_HPRE_DIV256 ((uint32_t)0x000000E0) /*!< SYSCLK divided by 256 */
+#define RCC_CFGR_HPRE_DIV512 ((uint32_t)0x000000F0) /*!< SYSCLK divided by 512 */
+
+/*!< PPRE configuration */
+#define RCC_CFGR_PPRE ((uint32_t)0x00000700) /*!< PRE[2:0] bits (APB prescaler) */
+#define RCC_CFGR_PPRE_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define RCC_CFGR_PPRE_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define RCC_CFGR_PPRE_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+
+#define RCC_CFGR_PPRE_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */
+#define RCC_CFGR_PPRE_DIV2 ((uint32_t)0x00000400) /*!< HCLK divided by 2 */
+#define RCC_CFGR_PPRE_DIV4 ((uint32_t)0x00000500) /*!< HCLK divided by 4 */
+#define RCC_CFGR_PPRE_DIV8 ((uint32_t)0x00000600) /*!< HCLK divided by 8 */
+#define RCC_CFGR_PPRE_DIV16 ((uint32_t)0x00000700) /*!< HCLK divided by 16 */
+
+/*!< ADCPPRE configuration */
+#define RCC_CFGR_ADCPRE ((uint32_t)0x00004000) /*!< ADCPRE bit (ADC prescaler) */
+
+#define RCC_CFGR_ADCPRE_DIV2 ((uint32_t)0x00000000) /*!< PCLK divided by 2 */
+#define RCC_CFGR_ADCPRE_DIV4 ((uint32_t)0x00004000) /*!< PCLK divided by 4 */
+
+#define RCC_CFGR_PLLSRC ((uint32_t)0x00018000) /*!< PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSI_DIV2 ((uint32_t)0x00000000) /*!< HSI clock divided by 2 selected as PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSI_PREDIV ((uint32_t)0x00008000) /*!< HSI/PREDIV clock selected as PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSE_PREDIV ((uint32_t)0x00010000) /*!< HSE/PREDIV clock selected as PLL entry clock source */
+
+#define RCC_CFGR_PLLXTPRE ((uint32_t)0x00020000) /*!< HSE divider for PLL entry */
+#define RCC_CFGR_PLLXTPRE_HSE_PREDIV_DIV1 ((uint32_t)0x00000000) /*!< HSE/PREDIV clock not divided for PLL entry */
+#define RCC_CFGR_PLLXTPRE_HSE_PREDIV_DIV2 ((uint32_t)0x00020000) /*!< HSE/PREDIV clock divided by 2 for PLL entry */
+
+/*!< PLLMUL configuration */
+#define RCC_CFGR_PLLMUL ((uint32_t)0x003C0000) /*!< PLLMUL[3:0] bits (PLL multiplication factor) */
+#define RCC_CFGR_PLLMUL_0 ((uint32_t)0x00040000) /*!< Bit 0 */
+#define RCC_CFGR_PLLMUL_1 ((uint32_t)0x00080000) /*!< Bit 1 */
+#define RCC_CFGR_PLLMUL_2 ((uint32_t)0x00100000) /*!< Bit 2 */
+#define RCC_CFGR_PLLMUL_3 ((uint32_t)0x00200000) /*!< Bit 3 */
+
+#define RCC_CFGR_PLLMUL2 ((uint32_t)0x00000000) /*!< PLL input clock*2 */
+#define RCC_CFGR_PLLMUL3 ((uint32_t)0x00040000) /*!< PLL input clock*3 */
+#define RCC_CFGR_PLLMUL4 ((uint32_t)0x00080000) /*!< PLL input clock*4 */
+#define RCC_CFGR_PLLMUL5 ((uint32_t)0x000C0000) /*!< PLL input clock*5 */
+#define RCC_CFGR_PLLMUL6 ((uint32_t)0x00100000) /*!< PLL input clock*6 */
+#define RCC_CFGR_PLLMUL7 ((uint32_t)0x00140000) /*!< PLL input clock*7 */
+#define RCC_CFGR_PLLMUL8 ((uint32_t)0x00180000) /*!< PLL input clock*8 */
+#define RCC_CFGR_PLLMUL9 ((uint32_t)0x001C0000) /*!< PLL input clock*9 */
+#define RCC_CFGR_PLLMUL10 ((uint32_t)0x00200000) /*!< PLL input clock10 */
+#define RCC_CFGR_PLLMUL11 ((uint32_t)0x00240000) /*!< PLL input clock*11 */
+#define RCC_CFGR_PLLMUL12 ((uint32_t)0x00280000) /*!< PLL input clock*12 */
+#define RCC_CFGR_PLLMUL13 ((uint32_t)0x002C0000) /*!< PLL input clock*13 */
+#define RCC_CFGR_PLLMUL14 ((uint32_t)0x00300000) /*!< PLL input clock*14 */
+#define RCC_CFGR_PLLMUL15 ((uint32_t)0x00340000) /*!< PLL input clock*15 */
+#define RCC_CFGR_PLLMUL16 ((uint32_t)0x00380000) /*!< PLL input clock*16 */
+
+/*!< USB configuration */
+#define RCC_CFGR_USBPRE ((uint32_t)0x00400000) /*!< USB prescaler */
+
+/*!< MCO configuration */
+#define RCC_CFGR_MCO ((uint32_t)0x0F000000) /*!< MCO[3:0] bits (Microcontroller Clock Output) */
+#define RCC_CFGR_MCO_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define RCC_CFGR_MCO_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define RCC_CFGR_MCO_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+#define RCC_CFGR_MCO_3 ((uint32_t)0x08000000) /*!< Bit 3 */
+
+#define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
+#define RCC_CFGR_MCO_HSI14 ((uint32_t)0x01000000) /*!< HSI14 clock selected as MCO source */
+#define RCC_CFGR_MCO_LSI ((uint32_t)0x02000000) /*!< LSI clock selected as MCO source */
+#define RCC_CFGR_MCO_LSE ((uint32_t)0x03000000) /*!< LSE clock selected as MCO source */
+#define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x04000000) /*!< System clock selected as MCO source */
+#define RCC_CFGR_MCO_HSI ((uint32_t)0x05000000) /*!< HSI clock selected as MCO source */
+#define RCC_CFGR_MCO_HSE ((uint32_t)0x06000000) /*!< HSE clock selected as MCO source */
+#define RCC_CFGR_MCO_PLL ((uint32_t)0x07000000) /*!< PLL clock divided by 2 selected as MCO source */
+
+#define RCC_CFGR_MCOPRE ((uint32_t)0x70000000) /*!< MCO prescaler */
+#define RCC_CFGR_MCOPRE_DIV1 ((uint32_t)0x00000000) /*!< MCO is divided by 1 */
+#define RCC_CFGR_MCOPRE_DIV2 ((uint32_t)0x10000000) /*!< MCO is divided by 2 */
+#define RCC_CFGR_MCOPRE_DIV4 ((uint32_t)0x20000000) /*!< MCO is divided by 4 */
+#define RCC_CFGR_MCOPRE_DIV8 ((uint32_t)0x30000000) /*!< MCO is divided by 8 */
+#define RCC_CFGR_MCOPRE_DIV16 ((uint32_t)0x40000000) /*!< MCO is divided by 16 */
+#define RCC_CFGR_MCOPRE_DIV32 ((uint32_t)0x50000000) /*!< MCO is divided by 32 */
+#define RCC_CFGR_MCOPRE_DIV64 ((uint32_t)0x60000000) /*!< MCO is divided by 64 */
+#define RCC_CFGR_MCOPRE_DIV128 ((uint32_t)0x70000000) /*!< MCO is divided by 128 */
+
+#define RCC_CFGR_PLLNODIV ((uint32_t)0x80000000) /*!< PLL is not divided to MCO */
+
+/*!<****************** Bit definition for RCC_CIR register *****************/
+#define RCC_CIR_LSIRDYF ((uint32_t)0x00000001) /*!< LSI Ready Interrupt flag */
+#define RCC_CIR_LSERDYF ((uint32_t)0x00000002) /*!< LSE Ready Interrupt flag */
+#define RCC_CIR_HSIRDYF ((uint32_t)0x00000004) /*!< HSI Ready Interrupt flag */
+#define RCC_CIR_HSERDYF ((uint32_t)0x00000008) /*!< HSE Ready Interrupt flag */
+#define RCC_CIR_PLLRDYF ((uint32_t)0x00000010) /*!< PLL Ready Interrupt flag */
+#define RCC_CIR_HSI14RDYF ((uint32_t)0x00000020) /*!< HSI14 Ready Interrupt flag */
+#define RCC_CIR_CSSF ((uint32_t)0x00000080) /*!< Clock Security System Interrupt flag */
+#define RCC_CIR_LSIRDYIE ((uint32_t)0x00000100) /*!< LSI Ready Interrupt Enable */
+#define RCC_CIR_LSERDYIE ((uint32_t)0x00000200) /*!< LSE Ready Interrupt Enable */
+#define RCC_CIR_HSIRDYIE ((uint32_t)0x00000400) /*!< HSI Ready Interrupt Enable */
+#define RCC_CIR_HSERDYIE ((uint32_t)0x00000800) /*!< HSE Ready Interrupt Enable */
+#define RCC_CIR_PLLRDYIE ((uint32_t)0x00001000) /*!< PLL Ready Interrupt Enable */
+#define RCC_CIR_HSI14RDYIE ((uint32_t)0x00002000) /*!< HSI14 Ready Interrupt Enable */
+#define RCC_CIR_LSIRDYC ((uint32_t)0x00010000) /*!< LSI Ready Interrupt Clear */
+#define RCC_CIR_LSERDYC ((uint32_t)0x00020000) /*!< LSE Ready Interrupt Clear */
+#define RCC_CIR_HSIRDYC ((uint32_t)0x00040000) /*!< HSI Ready Interrupt Clear */
+#define RCC_CIR_HSERDYC ((uint32_t)0x00080000) /*!< HSE Ready Interrupt Clear */
+#define RCC_CIR_PLLRDYC ((uint32_t)0x00100000) /*!< PLL Ready Interrupt Clear */
+#define RCC_CIR_HSI14RDYC ((uint32_t)0x00200000) /*!< HSI14 Ready Interrupt Clear */
+#define RCC_CIR_CSSC ((uint32_t)0x00800000) /*!< Clock Security System Interrupt Clear */
+
+/***************** Bit definition for RCC_APB2RSTR register ****************/
+#define RCC_APB2RSTR_SYSCFGRST ((uint32_t)0x00000001) /*!< SYSCFG clock reset */
+#define RCC_APB2RSTR_ADCRST ((uint32_t)0x00000200) /*!< ADC clock reset */
+#define RCC_APB2RSTR_TIM1RST ((uint32_t)0x00000800) /*!< TIM1 clock reset */
+#define RCC_APB2RSTR_SPI1RST ((uint32_t)0x00001000) /*!< SPI1 clock reset */
+#define RCC_APB2RSTR_USART1RST ((uint32_t)0x00004000) /*!< USART1 clock reset */
+#define RCC_APB2RSTR_TIM15RST ((uint32_t)0x00010000) /*!< TIM15 clock reset */
+#define RCC_APB2RSTR_TIM16RST ((uint32_t)0x00020000) /*!< TIM16 clock reset */
+#define RCC_APB2RSTR_TIM17RST ((uint32_t)0x00040000) /*!< TIM17 clock reset */
+#define RCC_APB2RSTR_DBGMCURST ((uint32_t)0x00400000) /*!< DBGMCU clock reset */
+
+/*!< Old ADC1 clock reset bit definition maintained for legacy purpose */
+#define RCC_APB2RSTR_ADC1RST RCC_APB2RSTR_ADCRST
+
+/***************** Bit definition for RCC_APB1RSTR register ****************/
+#define RCC_APB1RSTR_TIM3RST ((uint32_t)0x00000002) /*!< Timer 3 clock reset */
+#define RCC_APB1RSTR_TIM6RST ((uint32_t)0x00000010) /*!< Timer 6 clock reset */
+#define RCC_APB1RSTR_TIM7RST ((uint32_t)0x00000020) /*!< Timer 7 clock reset */
+#define RCC_APB1RSTR_TIM14RST ((uint32_t)0x00000100) /*!< Timer 14 clock reset */
+#define RCC_APB1RSTR_WWDGRST ((uint32_t)0x00000800) /*!< Window Watchdog clock reset */
+#define RCC_APB1RSTR_SPI2RST ((uint32_t)0x00004000) /*!< SPI2 clock reset */
+#define RCC_APB1RSTR_USART2RST ((uint32_t)0x00020000) /*!< USART 2 clock reset */
+#define RCC_APB1RSTR_USART3RST ((uint32_t)0x00040000) /*!< USART 3 clock reset */
+#define RCC_APB1RSTR_USART4RST ((uint32_t)0x00080000) /*!< USART 4 clock reset */
+#define RCC_APB1RSTR_I2C1RST ((uint32_t)0x00200000) /*!< I2C 1 clock reset */
+#define RCC_APB1RSTR_I2C2RST ((uint32_t)0x00400000) /*!< I2C 2 clock reset */
+#define RCC_APB1RSTR_USBRST ((uint32_t)0x00800000) /*!< USB clock reset */
+#define RCC_APB1RSTR_PWRRST ((uint32_t)0x10000000) /*!< PWR clock reset */
+
+/****************** Bit definition for RCC_AHBENR register *****************/
+#define RCC_AHBENR_DMAEN ((uint32_t)0x00000001) /*!< DMA1 clock enable */
+#define RCC_AHBENR_SRAMEN ((uint32_t)0x00000004) /*!< SRAM interface clock enable */
+#define RCC_AHBENR_FLITFEN ((uint32_t)0x00000010) /*!< FLITF clock enable */
+#define RCC_AHBENR_CRCEN ((uint32_t)0x00000040) /*!< CRC clock enable */
+#define RCC_AHBENR_GPIOAEN ((uint32_t)0x00020000) /*!< GPIOA clock enable */
+#define RCC_AHBENR_GPIOBEN ((uint32_t)0x00040000) /*!< GPIOB clock enable */
+#define RCC_AHBENR_GPIOCEN ((uint32_t)0x00080000) /*!< GPIOC clock enable */
+#define RCC_AHBENR_GPIODEN ((uint32_t)0x00100000) /*!< GPIOD clock enable */
+#define RCC_AHBENR_GPIOFEN ((uint32_t)0x00400000) /*!< GPIOF clock enable */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_AHBENR_DMA1EN RCC_AHBENR_DMAEN /*!< DMA1 clock enable */
+
+/***************** Bit definition for RCC_APB2ENR register *****************/
+#define RCC_APB2ENR_SYSCFGCOMPEN ((uint32_t)0x00000001) /*!< SYSCFG and comparator clock enable */
+#define RCC_APB2ENR_ADCEN ((uint32_t)0x00000200) /*!< ADC1 clock enable */
+#define RCC_APB2ENR_TIM1EN ((uint32_t)0x00000800) /*!< TIM1 clock enable */
+#define RCC_APB2ENR_SPI1EN ((uint32_t)0x00001000) /*!< SPI1 clock enable */
+#define RCC_APB2ENR_USART1EN ((uint32_t)0x00004000) /*!< USART1 clock enable */
+#define RCC_APB2ENR_TIM15EN ((uint32_t)0x00010000) /*!< TIM15 clock enable */
+#define RCC_APB2ENR_TIM16EN ((uint32_t)0x00020000) /*!< TIM16 clock enable */
+#define RCC_APB2ENR_TIM17EN ((uint32_t)0x00040000) /*!< TIM17 clock enable */
+#define RCC_APB2ENR_DBGMCUEN ((uint32_t)0x00400000) /*!< DBGMCU clock enable */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_APB2ENR_SYSCFGEN RCC_APB2ENR_SYSCFGCOMPEN /*!< SYSCFG clock enable */
+#define RCC_APB2ENR_ADC1EN RCC_APB2ENR_ADCEN /*!< ADC1 clock enable */
+
+/***************** Bit definition for RCC_APB1ENR register *****************/
+#define RCC_APB1ENR_TIM3EN ((uint32_t)0x00000002) /*!< Timer 3 clock enable */
+#define RCC_APB1ENR_TIM6EN ((uint32_t)0x00000010) /*!< Timer 6 clock enable */
+#define RCC_APB1ENR_TIM7EN ((uint32_t)0x00000020) /*!< Timer 7 clock enable */
+#define RCC_APB1ENR_TIM14EN ((uint32_t)0x00000100) /*!< Timer 14 clock enable */
+#define RCC_APB1ENR_WWDGEN ((uint32_t)0x00000800) /*!< Window Watchdog clock enable */
+#define RCC_APB1ENR_SPI2EN ((uint32_t)0x00004000) /*!< SPI2 clock enable */
+#define RCC_APB1ENR_USART2EN ((uint32_t)0x00020000) /*!< USART2 clock enable */
+#define RCC_APB1ENR_USART3EN ((uint32_t)0x00040000) /*!< USART3 clock enable */
+#define RCC_APB1ENR_USART4EN ((uint32_t)0x00080000) /*!< USART4 clock enable */
+#define RCC_APB1ENR_I2C1EN ((uint32_t)0x00200000) /*!< I2C1 clock enable */
+#define RCC_APB1ENR_I2C2EN ((uint32_t)0x00400000) /*!< I2C2 clock enable */
+#define RCC_APB1ENR_USBEN ((uint32_t)0x00800000) /*!< USB clock enable */
+#define RCC_APB1ENR_PWREN ((uint32_t)0x10000000) /*!< PWR clock enable */
+
+/******************* Bit definition for RCC_BDCR register ******************/
+#define RCC_BDCR_LSEON ((uint32_t)0x00000001) /*!< External Low Speed oscillator enable */
+#define RCC_BDCR_LSERDY ((uint32_t)0x00000002) /*!< External Low Speed oscillator Ready */
+#define RCC_BDCR_LSEBYP ((uint32_t)0x00000004) /*!< External Low Speed oscillator Bypass */
+
+#define RCC_BDCR_LSEDRV ((uint32_t)0x00000018) /*!< LSEDRV[1:0] bits (LSE Osc. drive capability) */
+#define RCC_BDCR_LSEDRV_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define RCC_BDCR_LSEDRV_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+
+#define RCC_BDCR_RTCSEL ((uint32_t)0x00000300) /*!< RTCSEL[1:0] bits (RTC clock source selection) */
+#define RCC_BDCR_RTCSEL_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define RCC_BDCR_RTCSEL_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+
+/*!< RTC configuration */
+#define RCC_BDCR_RTCSEL_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
+#define RCC_BDCR_RTCSEL_LSE ((uint32_t)0x00000100) /*!< LSE oscillator clock used as RTC clock */
+#define RCC_BDCR_RTCSEL_LSI ((uint32_t)0x00000200) /*!< LSI oscillator clock used as RTC clock */
+#define RCC_BDCR_RTCSEL_HSE ((uint32_t)0x00000300) /*!< HSE oscillator clock divided by 128 used as RTC clock */
+
+#define RCC_BDCR_RTCEN ((uint32_t)0x00008000) /*!< RTC clock enable */
+#define RCC_BDCR_BDRST ((uint32_t)0x00010000) /*!< Backup domain software reset */
+
+/******************* Bit definition for RCC_CSR register *******************/
+#define RCC_CSR_LSION ((uint32_t)0x00000001) /*!< Internal Low Speed oscillator enable */
+#define RCC_CSR_LSIRDY ((uint32_t)0x00000002) /*!< Internal Low Speed oscillator Ready */
+#define RCC_CSR_V18PWRRSTF ((uint32_t)0x00800000) /*!< V1.8 power domain reset flag */
+#define RCC_CSR_RMVF ((uint32_t)0x01000000) /*!< Remove reset flag */
+#define RCC_CSR_OBLRSTF ((uint32_t)0x02000000) /*!< OBL reset flag */
+#define RCC_CSR_PINRSTF ((uint32_t)0x04000000) /*!< PIN reset flag */
+#define RCC_CSR_PORRSTF ((uint32_t)0x08000000) /*!< POR/PDR reset flag */
+#define RCC_CSR_SFTRSTF ((uint32_t)0x10000000) /*!< Software Reset flag */
+#define RCC_CSR_IWDGRSTF ((uint32_t)0x20000000) /*!< Independent Watchdog reset flag */
+#define RCC_CSR_WWDGRSTF ((uint32_t)0x40000000) /*!< Window watchdog reset flag */
+#define RCC_CSR_LPWRRSTF ((uint32_t)0x80000000) /*!< Low-Power reset flag */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_CSR_OBL RCC_CSR_OBLRSTF /*!< OBL reset flag */
+
+/******************* Bit definition for RCC_AHBRSTR register ***************/
+#define RCC_AHBRSTR_GPIOARST ((uint32_t)0x00020000) /*!< GPIOA clock reset */
+#define RCC_AHBRSTR_GPIOBRST ((uint32_t)0x00040000) /*!< GPIOB clock reset */
+#define RCC_AHBRSTR_GPIOCRST ((uint32_t)0x00080000) /*!< GPIOC clock reset */
+#define RCC_AHBRSTR_GPIODRST ((uint32_t)0x00100000) /*!< GPIOD clock reset */
+#define RCC_AHBRSTR_GPIOFRST ((uint32_t)0x00400000) /*!< GPIOF clock reset */
+
+/******************* Bit definition for RCC_CFGR2 register *****************/
+/*!< PREDIV configuration */
+#define RCC_CFGR2_PREDIV ((uint32_t)0x0000000F) /*!< PREDIV[3:0] bits */
+#define RCC_CFGR2_PREDIV_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR2_PREDIV_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define RCC_CFGR2_PREDIV_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define RCC_CFGR2_PREDIV_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+
+#define RCC_CFGR2_PREDIV_DIV1 ((uint32_t)0x00000000) /*!< PREDIV input clock not divided */
+#define RCC_CFGR2_PREDIV_DIV2 ((uint32_t)0x00000001) /*!< PREDIV input clock divided by 2 */
+#define RCC_CFGR2_PREDIV_DIV3 ((uint32_t)0x00000002) /*!< PREDIV input clock divided by 3 */
+#define RCC_CFGR2_PREDIV_DIV4 ((uint32_t)0x00000003) /*!< PREDIV input clock divided by 4 */
+#define RCC_CFGR2_PREDIV_DIV5 ((uint32_t)0x00000004) /*!< PREDIV input clock divided by 5 */
+#define RCC_CFGR2_PREDIV_DIV6 ((uint32_t)0x00000005) /*!< PREDIV input clock divided by 6 */
+#define RCC_CFGR2_PREDIV_DIV7 ((uint32_t)0x00000006) /*!< PREDIV input clock divided by 7 */
+#define RCC_CFGR2_PREDIV_DIV8 ((uint32_t)0x00000007) /*!< PREDIV input clock divided by 8 */
+#define RCC_CFGR2_PREDIV_DIV9 ((uint32_t)0x00000008) /*!< PREDIV input clock divided by 9 */
+#define RCC_CFGR2_PREDIV_DIV10 ((uint32_t)0x00000009) /*!< PREDIV input clock divided by 10 */
+#define RCC_CFGR2_PREDIV_DIV11 ((uint32_t)0x0000000A) /*!< PREDIV input clock divided by 11 */
+#define RCC_CFGR2_PREDIV_DIV12 ((uint32_t)0x0000000B) /*!< PREDIV input clock divided by 12 */
+#define RCC_CFGR2_PREDIV_DIV13 ((uint32_t)0x0000000C) /*!< PREDIV input clock divided by 13 */
+#define RCC_CFGR2_PREDIV_DIV14 ((uint32_t)0x0000000D) /*!< PREDIV input clock divided by 14 */
+#define RCC_CFGR2_PREDIV_DIV15 ((uint32_t)0x0000000E) /*!< PREDIV input clock divided by 15 */
+#define RCC_CFGR2_PREDIV_DIV16 ((uint32_t)0x0000000F) /*!< PREDIV input clock divided by 16 */
+
+/******************* Bit definition for RCC_CFGR3 register *****************/
+/*!< USART1 Clock source selection */
+#define RCC_CFGR3_USART1SW ((uint32_t)0x00000003) /*!< USART1SW[1:0] bits */
+#define RCC_CFGR3_USART1SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR3_USART1SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+#define RCC_CFGR3_USART1SW_PCLK ((uint32_t)0x00000000) /*!< PCLK clock used as USART1 clock source */
+#define RCC_CFGR3_USART1SW_SYSCLK ((uint32_t)0x00000001) /*!< System clock selected as USART1 clock source */
+#define RCC_CFGR3_USART1SW_LSE ((uint32_t)0x00000002) /*!< LSE oscillator clock used as USART1 clock source */
+#define RCC_CFGR3_USART1SW_HSI ((uint32_t)0x00000003) /*!< HSI oscillator clock used as USART1 clock source */
+
+/*!< I2C1 Clock source selection */
+#define RCC_CFGR3_I2C1SW ((uint32_t)0x00000010) /*!< I2C1SW bits */
+
+#define RCC_CFGR3_I2C1SW_HSI ((uint32_t)0x00000000) /*!< HSI oscillator clock used as I2C1 clock source */
+#define RCC_CFGR3_I2C1SW_SYSCLK ((uint32_t)0x00000010) /*!< System clock selected as I2C1 clock source */
+
+/*!< USB Clock source selection */
+#define RCC_CFGR3_USBSW ((uint32_t)0x00000080) /*!< USBSW bits */
+
+#define RCC_CFGR3_USBSW_PLLCLK ((uint32_t)0x00000080) /*!< PLLCLK selected as USB clock source */
+
+/******************* Bit definition for RCC_CR2 register *******************/
+#define RCC_CR2_HSI14ON ((uint32_t)0x00000001) /*!< Internal High Speed 14MHz clock enable */
+#define RCC_CR2_HSI14RDY ((uint32_t)0x00000002) /*!< Internal High Speed 14MHz clock ready flag */
+#define RCC_CR2_HSI14DIS ((uint32_t)0x00000004) /*!< Internal High Speed 14MHz clock disable */
+#define RCC_CR2_HSI14TRIM ((uint32_t)0x000000F8) /*!< Internal High Speed 14MHz clock trimming */
+#define RCC_CR2_HSI14CAL ((uint32_t)0x0000FF00) /*!< Internal High Speed 14MHz clock Calibration */
+
+/*****************************************************************************/
+/* */
+/* Real-Time Clock (RTC) */
+/* */
+/*****************************************************************************/
+/******************** Bits definition for RTC_TR register ******************/
+#define RTC_TR_PM ((uint32_t)0x00400000)
+#define RTC_TR_HT ((uint32_t)0x00300000)
+#define RTC_TR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TR_HU ((uint32_t)0x000F0000)
+#define RTC_TR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TR_MNT ((uint32_t)0x00007000)
+#define RTC_TR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TR_MNU ((uint32_t)0x00000F00)
+#define RTC_TR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TR_ST ((uint32_t)0x00000070)
+#define RTC_TR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TR_SU ((uint32_t)0x0000000F)
+#define RTC_TR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_DR register ******************/
+#define RTC_DR_YT ((uint32_t)0x00F00000)
+#define RTC_DR_YT_0 ((uint32_t)0x00100000)
+#define RTC_DR_YT_1 ((uint32_t)0x00200000)
+#define RTC_DR_YT_2 ((uint32_t)0x00400000)
+#define RTC_DR_YT_3 ((uint32_t)0x00800000)
+#define RTC_DR_YU ((uint32_t)0x000F0000)
+#define RTC_DR_YU_0 ((uint32_t)0x00010000)
+#define RTC_DR_YU_1 ((uint32_t)0x00020000)
+#define RTC_DR_YU_2 ((uint32_t)0x00040000)
+#define RTC_DR_YU_3 ((uint32_t)0x00080000)
+#define RTC_DR_WDU ((uint32_t)0x0000E000)
+#define RTC_DR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_DR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_DR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_DR_MT ((uint32_t)0x00001000)
+#define RTC_DR_MU ((uint32_t)0x00000F00)
+#define RTC_DR_MU_0 ((uint32_t)0x00000100)
+#define RTC_DR_MU_1 ((uint32_t)0x00000200)
+#define RTC_DR_MU_2 ((uint32_t)0x00000400)
+#define RTC_DR_MU_3 ((uint32_t)0x00000800)
+#define RTC_DR_DT ((uint32_t)0x00000030)
+#define RTC_DR_DT_0 ((uint32_t)0x00000010)
+#define RTC_DR_DT_1 ((uint32_t)0x00000020)
+#define RTC_DR_DU ((uint32_t)0x0000000F)
+#define RTC_DR_DU_0 ((uint32_t)0x00000001)
+#define RTC_DR_DU_1 ((uint32_t)0x00000002)
+#define RTC_DR_DU_2 ((uint32_t)0x00000004)
+#define RTC_DR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_CR register ******************/
+#define RTC_CR_COE ((uint32_t)0x00800000)
+#define RTC_CR_OSEL ((uint32_t)0x00600000)
+#define RTC_CR_OSEL_0 ((uint32_t)0x00200000)
+#define RTC_CR_OSEL_1 ((uint32_t)0x00400000)
+#define RTC_CR_POL ((uint32_t)0x00100000)
+#define RTC_CR_COSEL ((uint32_t)0x00080000)
+#define RTC_CR_BCK ((uint32_t)0x00040000)
+#define RTC_CR_SUB1H ((uint32_t)0x00020000)
+#define RTC_CR_ADD1H ((uint32_t)0x00010000)
+#define RTC_CR_TSIE ((uint32_t)0x00008000)
+#define RTC_CR_ALRAIE ((uint32_t)0x00001000)
+#define RTC_CR_TSE ((uint32_t)0x00000800)
+#define RTC_CR_WUTE ((uint32_t)0x00000400)
+#define RTC_CR_ALRAE ((uint32_t)0x00000100)
+#define RTC_CR_FMT ((uint32_t)0x00000040)
+#define RTC_CR_BYPSHAD ((uint32_t)0x00000020)
+#define RTC_CR_REFCKON ((uint32_t)0x00000010)
+#define RTC_CR_TSEDGE ((uint32_t)0x00000008)
+#define RTC_CR_WUCKSEL ((uint32_t)0x00000007)
+#define RTC_CR_WUCKSEL_0 ((uint32_t)0x00000001)
+#define RTC_CR_WUCKSEL_1 ((uint32_t)0x00000002)
+#define RTC_CR_WUCKSEL_2 ((uint32_t)0x00000004)
+
+/******************** Bits definition for RTC_ISR register *****************/
+#define RTC_ISR_RECALPF ((uint32_t)0x00010000)
+#define RTC_ISR_TAMP2F ((uint32_t)0x00004000)
+#define RTC_ISR_TAMP1F ((uint32_t)0x00002000)
+#define RTC_ISR_TSOVF ((uint32_t)0x00001000)
+#define RTC_ISR_TSF ((uint32_t)0x00000800)
+#define RTC_ISR_WUTF ((uint32_t)0x00000400)
+#define RTC_ISR_ALRAF ((uint32_t)0x00000100)
+#define RTC_ISR_INIT ((uint32_t)0x00000080)
+#define RTC_ISR_INITF ((uint32_t)0x00000040)
+#define RTC_ISR_RSF ((uint32_t)0x00000020)
+#define RTC_ISR_INITS ((uint32_t)0x00000010)
+#define RTC_ISR_SHPF ((uint32_t)0x00000008)
+#define RTC_ISR_WUTWF ((uint32_t)0x00000004)
+#define RTC_ISR_ALRAWF ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_PRER register ****************/
+#define RTC_PRER_PREDIV_A ((uint32_t)0x007F0000)
+#define RTC_PRER_PREDIV_S ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_WUTR register ****************/
+#define RTC_WUTR_WUT ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_ALRMAR register **************/
+#define RTC_ALRMAR_MSK4 ((uint32_t)0x80000000)
+#define RTC_ALRMAR_WDSEL ((uint32_t)0x40000000)
+#define RTC_ALRMAR_DT ((uint32_t)0x30000000)
+#define RTC_ALRMAR_DT_0 ((uint32_t)0x10000000)
+#define RTC_ALRMAR_DT_1 ((uint32_t)0x20000000)
+#define RTC_ALRMAR_DU ((uint32_t)0x0F000000)
+#define RTC_ALRMAR_DU_0 ((uint32_t)0x01000000)
+#define RTC_ALRMAR_DU_1 ((uint32_t)0x02000000)
+#define RTC_ALRMAR_DU_2 ((uint32_t)0x04000000)
+#define RTC_ALRMAR_DU_3 ((uint32_t)0x08000000)
+#define RTC_ALRMAR_MSK3 ((uint32_t)0x00800000)
+#define RTC_ALRMAR_PM ((uint32_t)0x00400000)
+#define RTC_ALRMAR_HT ((uint32_t)0x00300000)
+#define RTC_ALRMAR_HT_0 ((uint32_t)0x00100000)
+#define RTC_ALRMAR_HT_1 ((uint32_t)0x00200000)
+#define RTC_ALRMAR_HU ((uint32_t)0x000F0000)
+#define RTC_ALRMAR_HU_0 ((uint32_t)0x00010000)
+#define RTC_ALRMAR_HU_1 ((uint32_t)0x00020000)
+#define RTC_ALRMAR_HU_2 ((uint32_t)0x00040000)
+#define RTC_ALRMAR_HU_3 ((uint32_t)0x00080000)
+#define RTC_ALRMAR_MSK2 ((uint32_t)0x00008000)
+#define RTC_ALRMAR_MNT ((uint32_t)0x00007000)
+#define RTC_ALRMAR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_ALRMAR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_ALRMAR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_ALRMAR_MNU ((uint32_t)0x00000F00)
+#define RTC_ALRMAR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_ALRMAR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_ALRMAR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_ALRMAR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_ALRMAR_MSK1 ((uint32_t)0x00000080)
+#define RTC_ALRMAR_ST ((uint32_t)0x00000070)
+#define RTC_ALRMAR_ST_0 ((uint32_t)0x00000010)
+#define RTC_ALRMAR_ST_1 ((uint32_t)0x00000020)
+#define RTC_ALRMAR_ST_2 ((uint32_t)0x00000040)
+#define RTC_ALRMAR_SU ((uint32_t)0x0000000F)
+#define RTC_ALRMAR_SU_0 ((uint32_t)0x00000001)
+#define RTC_ALRMAR_SU_1 ((uint32_t)0x00000002)
+#define RTC_ALRMAR_SU_2 ((uint32_t)0x00000004)
+#define RTC_ALRMAR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_WPR register *****************/
+#define RTC_WPR_KEY ((uint32_t)0x000000FF)
+
+/******************** Bits definition for RTC_SSR register *****************/
+#define RTC_SSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_SHIFTR register **************/
+#define RTC_SHIFTR_SUBFS ((uint32_t)0x00007FFF)
+#define RTC_SHIFTR_ADD1S ((uint32_t)0x80000000)
+
+/******************** Bits definition for RTC_TSTR register ****************/
+#define RTC_TSTR_PM ((uint32_t)0x00400000)
+#define RTC_TSTR_HT ((uint32_t)0x00300000)
+#define RTC_TSTR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TSTR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TSTR_HU ((uint32_t)0x000F0000)
+#define RTC_TSTR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TSTR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TSTR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TSTR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TSTR_MNT ((uint32_t)0x00007000)
+#define RTC_TSTR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TSTR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TSTR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TSTR_MNU ((uint32_t)0x00000F00)
+#define RTC_TSTR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TSTR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TSTR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TSTR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TSTR_ST ((uint32_t)0x00000070)
+#define RTC_TSTR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TSTR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TSTR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TSTR_SU ((uint32_t)0x0000000F)
+#define RTC_TSTR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TSTR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TSTR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TSTR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSDR register ****************/
+#define RTC_TSDR_WDU ((uint32_t)0x0000E000)
+#define RTC_TSDR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_TSDR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_TSDR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_TSDR_MT ((uint32_t)0x00001000)
+#define RTC_TSDR_MU ((uint32_t)0x00000F00)
+#define RTC_TSDR_MU_0 ((uint32_t)0x00000100)
+#define RTC_TSDR_MU_1 ((uint32_t)0x00000200)
+#define RTC_TSDR_MU_2 ((uint32_t)0x00000400)
+#define RTC_TSDR_MU_3 ((uint32_t)0x00000800)
+#define RTC_TSDR_DT ((uint32_t)0x00000030)
+#define RTC_TSDR_DT_0 ((uint32_t)0x00000010)
+#define RTC_TSDR_DT_1 ((uint32_t)0x00000020)
+#define RTC_TSDR_DU ((uint32_t)0x0000000F)
+#define RTC_TSDR_DU_0 ((uint32_t)0x00000001)
+#define RTC_TSDR_DU_1 ((uint32_t)0x00000002)
+#define RTC_TSDR_DU_2 ((uint32_t)0x00000004)
+#define RTC_TSDR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSSSR register ***************/
+#define RTC_TSSSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_CALR register ****************/
+#define RTC_CALR_CALP ((uint32_t)0x00008000)
+#define RTC_CALR_CALW8 ((uint32_t)0x00004000)
+#define RTC_CALR_CALW16 ((uint32_t)0x00002000)
+#define RTC_CALR_CALM ((uint32_t)0x000001FF)
+#define RTC_CALR_CALM_0 ((uint32_t)0x00000001)
+#define RTC_CALR_CALM_1 ((uint32_t)0x00000002)
+#define RTC_CALR_CALM_2 ((uint32_t)0x00000004)
+#define RTC_CALR_CALM_3 ((uint32_t)0x00000008)
+#define RTC_CALR_CALM_4 ((uint32_t)0x00000010)
+#define RTC_CALR_CALM_5 ((uint32_t)0x00000020)
+#define RTC_CALR_CALM_6 ((uint32_t)0x00000040)
+#define RTC_CALR_CALM_7 ((uint32_t)0x00000080)
+#define RTC_CALR_CALM_8 ((uint32_t)0x00000100)
+
+/******************** Bits definition for RTC_TAFCR register ***************/
+#define RTC_TAFCR_ALARMOUTTYPE ((uint32_t)0x00040000)
+#define RTC_TAFCR_TAMPPUDIS ((uint32_t)0x00008000)
+#define RTC_TAFCR_TAMPPRCH ((uint32_t)0x00006000)
+#define RTC_TAFCR_TAMPPRCH_0 ((uint32_t)0x00002000)
+#define RTC_TAFCR_TAMPPRCH_1 ((uint32_t)0x00004000)
+#define RTC_TAFCR_TAMPFLT ((uint32_t)0x00001800)
+#define RTC_TAFCR_TAMPFLT_0 ((uint32_t)0x00000800)
+#define RTC_TAFCR_TAMPFLT_1 ((uint32_t)0x00001000)
+#define RTC_TAFCR_TAMPFREQ ((uint32_t)0x00000700)
+#define RTC_TAFCR_TAMPFREQ_0 ((uint32_t)0x00000100)
+#define RTC_TAFCR_TAMPFREQ_1 ((uint32_t)0x00000200)
+#define RTC_TAFCR_TAMPFREQ_2 ((uint32_t)0x00000400)
+#define RTC_TAFCR_TAMPTS ((uint32_t)0x00000080)
+#define RTC_TAFCR_TAMP2TRG ((uint32_t)0x00000010)
+#define RTC_TAFCR_TAMP2E ((uint32_t)0x00000008)
+#define RTC_TAFCR_TAMPIE ((uint32_t)0x00000004)
+#define RTC_TAFCR_TAMP1TRG ((uint32_t)0x00000002)
+#define RTC_TAFCR_TAMP1E ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_ALRMASSR register ************/
+#define RTC_ALRMASSR_MASKSS ((uint32_t)0x0F000000)
+#define RTC_ALRMASSR_MASKSS_0 ((uint32_t)0x01000000)
+#define RTC_ALRMASSR_MASKSS_1 ((uint32_t)0x02000000)
+#define RTC_ALRMASSR_MASKSS_2 ((uint32_t)0x04000000)
+#define RTC_ALRMASSR_MASKSS_3 ((uint32_t)0x08000000)
+#define RTC_ALRMASSR_SS ((uint32_t)0x00007FFF)
+
+/*****************************************************************************/
+/* */
+/* Serial Peripheral Interface (SPI) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for SPI_CR1 register *******************/
+#define SPI_CR1_CPHA ((uint32_t)0x00000001) /*!< Clock Phase */
+#define SPI_CR1_CPOL ((uint32_t)0x00000002) /*!< Clock Polarity */
+#define SPI_CR1_MSTR ((uint32_t)0x00000004) /*!< Master Selection */
+#define SPI_CR1_BR ((uint32_t)0x00000038) /*!< BR[2:0] bits (Baud Rate Control) */
+#define SPI_CR1_BR_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define SPI_CR1_BR_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define SPI_CR1_BR_2 ((uint32_t)0x00000020) /*!< Bit 2 */
+#define SPI_CR1_SPE ((uint32_t)0x00000040) /*!< SPI Enable */
+#define SPI_CR1_LSBFIRST ((uint32_t)0x00000080) /*!< Frame Format */
+#define SPI_CR1_SSI ((uint32_t)0x00000100) /*!< Internal slave select */
+#define SPI_CR1_SSM ((uint32_t)0x00000200) /*!< Software slave management */
+#define SPI_CR1_RXONLY ((uint32_t)0x00000400) /*!< Receive only */
+#define SPI_CR1_CRCL ((uint32_t)0x00000800) /*!< CRC Length */
+#define SPI_CR1_CRCNEXT ((uint32_t)0x00001000) /*!< Transmit CRC next */
+#define SPI_CR1_CRCEN ((uint32_t)0x00002000) /*!< Hardware CRC calculation enable */
+#define SPI_CR1_BIDIOE ((uint32_t)0x00004000) /*!< Output enable in bidirectional mode */
+#define SPI_CR1_BIDIMODE ((uint32_t)0x00008000) /*!< Bidirectional data mode enable */
+
+/******************* Bit definition for SPI_CR2 register *******************/
+#define SPI_CR2_RXDMAEN ((uint32_t)0x00000001) /*!< Rx Buffer DMA Enable */
+#define SPI_CR2_TXDMAEN ((uint32_t)0x00000002) /*!< Tx Buffer DMA Enable */
+#define SPI_CR2_SSOE ((uint32_t)0x00000004) /*!< SS Output Enable */
+#define SPI_CR2_NSSP ((uint32_t)0x00000008) /*!< NSS pulse management Enable */
+#define SPI_CR2_FRF ((uint32_t)0x00000010) /*!< Frame Format Enable */
+#define SPI_CR2_ERRIE ((uint32_t)0x00000020) /*!< Error Interrupt Enable */
+#define SPI_CR2_RXNEIE ((uint32_t)0x00000040) /*!< RX buffer Not Empty Interrupt Enable */
+#define SPI_CR2_TXEIE ((uint32_t)0x00000080) /*!< Tx buffer Empty Interrupt Enable */
+#define SPI_CR2_DS ((uint32_t)0x00000F00) /*!< DS[3:0] Data Size */
+#define SPI_CR2_DS_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define SPI_CR2_DS_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define SPI_CR2_DS_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define SPI_CR2_DS_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+#define SPI_CR2_FRXTH ((uint32_t)0x00001000) /*!< FIFO reception Threshold */
+#define SPI_CR2_LDMARX ((uint32_t)0x00002000) /*!< Last DMA transfer for reception */
+#define SPI_CR2_LDMATX ((uint32_t)0x00004000) /*!< Last DMA transfer for transmission */
+
+/******************** Bit definition for SPI_SR register *******************/
+#define SPI_SR_RXNE ((uint32_t)0x00000001) /*!< Receive buffer Not Empty */
+#define SPI_SR_TXE ((uint32_t)0x00000002) /*!< Transmit buffer Empty */
+#define SPI_SR_CRCERR ((uint32_t)0x00000010) /*!< CRC Error flag */
+#define SPI_SR_MODF ((uint32_t)0x00000020) /*!< Mode fault */
+#define SPI_SR_OVR ((uint32_t)0x00000040) /*!< Overrun flag */
+#define SPI_SR_BSY ((uint32_t)0x00000080) /*!< Busy flag */
+#define SPI_SR_FRE ((uint32_t)0x00000100) /*!< TI frame format error */
+#define SPI_SR_FRLVL ((uint32_t)0x00000600) /*!< FIFO Reception Level */
+#define SPI_SR_FRLVL_0 ((uint32_t)0x00000200) /*!< Bit 0 */
+#define SPI_SR_FRLVL_1 ((uint32_t)0x00000400) /*!< Bit 1 */
+#define SPI_SR_FTLVL ((uint32_t)0x00001800) /*!< FIFO Transmission Level */
+#define SPI_SR_FTLVL_0 ((uint32_t)0x00000800) /*!< Bit 0 */
+#define SPI_SR_FTLVL_1 ((uint32_t)0x00001000) /*!< Bit 1 */
+
+/******************** Bit definition for SPI_DR register *******************/
+#define SPI_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data Register */
+
+/******************* Bit definition for SPI_CRCPR register *****************/
+#define SPI_CRCPR_CRCPOLY ((uint32_t)0xFFFFFFFF) /*!< CRC polynomial register */
+
+/****************** Bit definition for SPI_RXCRCR register *****************/
+#define SPI_RXCRCR_RXCRC ((uint32_t)0xFFFFFFFF) /*!< Rx CRC Register */
+
+/****************** Bit definition for SPI_TXCRCR register *****************/
+#define SPI_TXCRCR_TXCRC ((uint32_t)0xFFFFFFFF) /*!< Tx CRC Register */
+
+/****************** Bit definition for SPI_I2SCFGR register ****************/
+#define SPI_I2SCFGR_I2SMOD ((uint32_t)0x00000800) /*!< Keep for compatibility */
+
+/*****************************************************************************/
+/* */
+/* System Configuration (SYSCFG) */
+/* */
+/*****************************************************************************/
+/***************** Bit definition for SYSCFG_CFGR1 register ****************/
+#define SYSCFG_CFGR1_MEM_MODE ((uint32_t)0x00000003) /*!< SYSCFG_Memory Remap Config */
+#define SYSCFG_CFGR1_MEM_MODE_0 ((uint32_t)0x00000001) /*!< SYSCFG_Memory Remap Config Bit 0 */
+#define SYSCFG_CFGR1_MEM_MODE_1 ((uint32_t)0x00000002) /*!< SYSCFG_Memory Remap Config Bit 1 */
+
+#define SYSCFG_CFGR1_DMA_RMP ((uint32_t)0x04001F00) /*!< DMA remap mask */
+#define SYSCFG_CFGR1_ADC_DMA_RMP ((uint32_t)0x00000100) /*!< ADC DMA remap */
+#define SYSCFG_CFGR1_USART1TX_DMA_RMP ((uint32_t)0x00000200) /*!< USART1 TX DMA remap */
+#define SYSCFG_CFGR1_USART1RX_DMA_RMP ((uint32_t)0x00000400) /*!< USART1 RX DMA remap */
+#define SYSCFG_CFGR1_TIM16_DMA_RMP ((uint32_t)0x00000800) /*!< Timer 16 DMA remap */
+#define SYSCFG_CFGR1_TIM17_DMA_RMP ((uint32_t)0x00001000) /*!< Timer 17 DMA remap */
+#define SYSCFG_CFGR1_USART3_DMA_RMP ((uint32_t)0x04000000) /*!< USART3 DMA remap */
+
+#define SYSCFG_CFGR1_I2C_FMP_PB6 ((uint32_t)0x00010000) /*!< I2C PB6 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB7 ((uint32_t)0x00020000) /*!< I2C PB7 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB8 ((uint32_t)0x00040000) /*!< I2C PB8 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB9 ((uint32_t)0x00080000) /*!< I2C PB9 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_I2C1 ((uint32_t)0x00100000) /*!< Enable Fast Mode Plus on PB10, PB11, PF6 and PF7 */
+
+/***************** Bit definition for SYSCFG_EXTICR1 register **************/
+#define SYSCFG_EXTICR1_EXTI0 ((uint16_t)0x000F) /*!< EXTI 0 configuration */
+#define SYSCFG_EXTICR1_EXTI1 ((uint16_t)0x00F0) /*!< EXTI 1 configuration */
+#define SYSCFG_EXTICR1_EXTI2 ((uint16_t)0x0F00) /*!< EXTI 2 configuration */
+#define SYSCFG_EXTICR1_EXTI3 ((uint16_t)0xF000) /*!< EXTI 3 configuration */
+
+/**
+ * @brief EXTI0 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI0_PA ((uint16_t)0x0000) /*!< PA[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PB ((uint16_t)0x0001) /*!< PB[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PC ((uint16_t)0x0002) /*!< PC[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PD ((uint16_t)0x0003) /*!< PD[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PF ((uint16_t)0x0005) /*!< PF[0] pin */
+
+/**
+ * @brief EXTI1 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI1_PA ((uint16_t)0x0000) /*!< PA[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PB ((uint16_t)0x0010) /*!< PB[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PC ((uint16_t)0x0020) /*!< PC[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PD ((uint16_t)0x0030) /*!< PD[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PF ((uint16_t)0x0050) /*!< PF[1] pin */
+
+/**
+ * @brief EXTI2 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI2_PA ((uint16_t)0x0000) /*!< PA[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PB ((uint16_t)0x0100) /*!< PB[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PC ((uint16_t)0x0200) /*!< PC[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PD ((uint16_t)0x0300) /*!< PD[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PF ((uint16_t)0x0500) /*!< PF[2] pin */
+
+/**
+ * @brief EXTI3 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI3_PA ((uint16_t)0x0000) /*!< PA[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PB ((uint16_t)0x1000) /*!< PB[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PC ((uint16_t)0x2000) /*!< PC[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PD ((uint16_t)0x3000) /*!< PD[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PF ((uint16_t)0x5000) /*!< PF[3] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR2 register **************/
+#define SYSCFG_EXTICR2_EXTI4 ((uint16_t)0x000F) /*!< EXTI 4 configuration */
+#define SYSCFG_EXTICR2_EXTI5 ((uint16_t)0x00F0) /*!< EXTI 5 configuration */
+#define SYSCFG_EXTICR2_EXTI6 ((uint16_t)0x0F00) /*!< EXTI 6 configuration */
+#define SYSCFG_EXTICR2_EXTI7 ((uint16_t)0xF000) /*!< EXTI 7 configuration */
+
+/**
+ * @brief EXTI4 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI4_PA ((uint16_t)0x0000) /*!< PA[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PB ((uint16_t)0x0001) /*!< PB[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PC ((uint16_t)0x0002) /*!< PC[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PD ((uint16_t)0x0003) /*!< PD[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PF ((uint16_t)0x0005) /*!< PF[4] pin */
+
+/**
+ * @brief EXTI5 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI5_PA ((uint16_t)0x0000) /*!< PA[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PB ((uint16_t)0x0010) /*!< PB[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PC ((uint16_t)0x0020) /*!< PC[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PD ((uint16_t)0x0030) /*!< PD[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PF ((uint16_t)0x0050) /*!< PF[5] pin */
+
+/**
+ * @brief EXTI6 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI6_PA ((uint16_t)0x0000) /*!< PA[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PB ((uint16_t)0x0100) /*!< PB[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PC ((uint16_t)0x0200) /*!< PC[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PD ((uint16_t)0x0300) /*!< PD[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PF ((uint16_t)0x0500) /*!< PF[6] pin */
+
+/**
+ * @brief EXTI7 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI7_PA ((uint16_t)0x0000) /*!< PA[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PB ((uint16_t)0x1000) /*!< PB[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PC ((uint16_t)0x2000) /*!< PC[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PD ((uint16_t)0x3000) /*!< PD[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PF ((uint16_t)0x5000) /*!< PF[7] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR3 register **************/
+#define SYSCFG_EXTICR3_EXTI8 ((uint16_t)0x000F) /*!< EXTI 8 configuration */
+#define SYSCFG_EXTICR3_EXTI9 ((uint16_t)0x00F0) /*!< EXTI 9 configuration */
+#define SYSCFG_EXTICR3_EXTI10 ((uint16_t)0x0F00) /*!< EXTI 10 configuration */
+#define SYSCFG_EXTICR3_EXTI11 ((uint16_t)0xF000) /*!< EXTI 11 configuration */
+
+/**
+ * @brief EXTI8 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI8_PA ((uint16_t)0x0000) /*!< PA[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PB ((uint16_t)0x0001) /*!< PB[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PC ((uint16_t)0x0002) /*!< PC[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PD ((uint16_t)0x0003) /*!< PD[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PF ((uint16_t)0x0005) /*!< PF[8] pin */
+
+/**
+ * @brief EXTI9 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI9_PA ((uint16_t)0x0000) /*!< PA[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PB ((uint16_t)0x0010) /*!< PB[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PC ((uint16_t)0x0020) /*!< PC[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PD ((uint16_t)0x0030) /*!< PD[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PF ((uint16_t)0x0050) /*!< PF[9] pin */
+
+/**
+ * @brief EXTI10 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI10_PA ((uint16_t)0x0000) /*!< PA[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PB ((uint16_t)0x0100) /*!< PB[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PC ((uint16_t)0x0200) /*!< PC[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PD ((uint16_t)0x0300) /*!< PD[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PF ((uint16_t)0x0500) /*!< PF[10] pin */
+
+/**
+ * @brief EXTI11 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI11_PA ((uint16_t)0x0000) /*!< PA[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PB ((uint16_t)0x1000) /*!< PB[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PC ((uint16_t)0x2000) /*!< PC[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PD ((uint16_t)0x3000) /*!< PD[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PF ((uint16_t)0x5000) /*!< PF[11] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR4 register **************/
+#define SYSCFG_EXTICR4_EXTI12 ((uint16_t)0x000F) /*!< EXTI 12 configuration */
+#define SYSCFG_EXTICR4_EXTI13 ((uint16_t)0x00F0) /*!< EXTI 13 configuration */
+#define SYSCFG_EXTICR4_EXTI14 ((uint16_t)0x0F00) /*!< EXTI 14 configuration */
+#define SYSCFG_EXTICR4_EXTI15 ((uint16_t)0xF000) /*!< EXTI 15 configuration */
+
+/**
+ * @brief EXTI12 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI12_PA ((uint16_t)0x0000) /*!< PA[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PB ((uint16_t)0x0001) /*!< PB[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PC ((uint16_t)0x0002) /*!< PC[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PD ((uint16_t)0x0003) /*!< PD[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PF ((uint16_t)0x0005) /*!< PF[12] pin */
+
+/**
+ * @brief EXTI13 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI13_PA ((uint16_t)0x0000) /*!< PA[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PB ((uint16_t)0x0010) /*!< PB[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PC ((uint16_t)0x0020) /*!< PC[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PD ((uint16_t)0x0030) /*!< PD[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PF ((uint16_t)0x0050) /*!< PF[13] pin */
+
+/**
+ * @brief EXTI14 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI14_PA ((uint16_t)0x0000) /*!< PA[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PB ((uint16_t)0x0100) /*!< PB[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PC ((uint16_t)0x0200) /*!< PC[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PD ((uint16_t)0x0300) /*!< PD[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PF ((uint16_t)0x0500) /*!< PF[14] pin */
+
+/**
+ * @brief EXTI15 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI15_PA ((uint16_t)0x0000) /*!< PA[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PB ((uint16_t)0x1000) /*!< PB[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PC ((uint16_t)0x2000) /*!< PC[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PD ((uint16_t)0x3000) /*!< PD[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PF ((uint16_t)0x5000) /*!< PF[15] pin */
+
+/***************** Bit definition for SYSCFG_CFGR2 register ****************/
+#define SYSCFG_CFGR2_LOCKUP_LOCK ((uint32_t)0x00000001) /*!< Enables and locks the LOCKUP (Hardfault) output of CortexM0 with Break Input of TIMER1 */
+#define SYSCFG_CFGR2_SRAM_PARITY_LOCK ((uint32_t)0x00000002) /*!< Enables and locks the SRAM_PARITY error signal with Break Input of TIMER1 */
+#define SYSCFG_CFGR2_SRAM_PEF ((uint32_t)0x00000100) /*!< SRAM Parity error flag */
+#define SYSCFG_CFGR2_SRAM_PE SYSCFG_CFGR2_SRAM_PEF /*!< SRAM Parity error flag (define maintained for legacy purpose) */
+
+/*****************************************************************************/
+/* */
+/* Timers (TIM) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for TIM_CR1 register *******************/
+#define TIM_CR1_CEN ((uint32_t)0x00000001) /*!<Counter enable */
+#define TIM_CR1_UDIS ((uint32_t)0x00000002) /*!<Update disable */
+#define TIM_CR1_URS ((uint32_t)0x00000004) /*!<Update request source */
+#define TIM_CR1_OPM ((uint32_t)0x00000008) /*!<One pulse mode */
+#define TIM_CR1_DIR ((uint32_t)0x00000010) /*!<Direction */
+
+#define TIM_CR1_CMS ((uint32_t)0x00000060) /*!<CMS[1:0] bits (Center-aligned mode selection) */
+#define TIM_CR1_CMS_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define TIM_CR1_CMS_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+
+#define TIM_CR1_ARPE ((uint32_t)0x00000080) /*!<Auto-reload preload enable */
+
+#define TIM_CR1_CKD ((uint32_t)0x00000300) /*!<CKD[1:0] bits (clock division) */
+#define TIM_CR1_CKD_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CR1_CKD_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+/******************* Bit definition for TIM_CR2 register *******************/
+#define TIM_CR2_CCPC ((uint32_t)0x00000001) /*!<Capture/Compare Preloaded Control */
+#define TIM_CR2_CCUS ((uint32_t)0x00000004) /*!<Capture/Compare Control Update Selection */
+#define TIM_CR2_CCDS ((uint32_t)0x00000008) /*!<Capture/Compare DMA Selection */
+
+#define TIM_CR2_MMS ((uint32_t)0x00000070) /*!<MMS[2:0] bits (Master Mode Selection) */
+#define TIM_CR2_MMS_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CR2_MMS_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CR2_MMS_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CR2_TI1S ((uint32_t)0x00000080) /*!<TI1 Selection */
+#define TIM_CR2_OIS1 ((uint32_t)0x00000100) /*!<Output Idle state 1 (OC1 output) */
+#define TIM_CR2_OIS1N ((uint32_t)0x00000200) /*!<Output Idle state 1 (OC1N output) */
+#define TIM_CR2_OIS2 ((uint32_t)0x00000400) /*!<Output Idle state 2 (OC2 output) */
+#define TIM_CR2_OIS2N ((uint32_t)0x00000800) /*!<Output Idle state 2 (OC2N output) */
+#define TIM_CR2_OIS3 ((uint32_t)0x00001000) /*!<Output Idle state 3 (OC3 output) */
+#define TIM_CR2_OIS3N ((uint32_t)0x00002000) /*!<Output Idle state 3 (OC3N output) */
+#define TIM_CR2_OIS4 ((uint32_t)0x00004000) /*!<Output Idle state 4 (OC4 output) */
+
+/******************* Bit definition for TIM_SMCR register ******************/
+#define TIM_SMCR_SMS ((uint32_t)0x00000007) /*!<SMS[2:0] bits (Slave mode selection) */
+#define TIM_SMCR_SMS_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_SMCR_SMS_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_SMCR_SMS_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+
+#define TIM_SMCR_OCCS ((uint32_t)0x00000008) /*!< OCREF clear selection */
+
+#define TIM_SMCR_TS ((uint32_t)0x00000070) /*!<TS[2:0] bits (Trigger selection) */
+#define TIM_SMCR_TS_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_SMCR_TS_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_SMCR_TS_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_SMCR_MSM ((uint32_t)0x00000080) /*!<Master/slave mode */
+
+#define TIM_SMCR_ETF ((uint32_t)0x00000F00) /*!<ETF[3:0] bits (External trigger filter) */
+#define TIM_SMCR_ETF_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_SMCR_ETF_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define TIM_SMCR_ETF_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define TIM_SMCR_ETF_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+
+#define TIM_SMCR_ETPS ((uint32_t)0x00003000) /*!<ETPS[1:0] bits (External trigger prescaler) */
+#define TIM_SMCR_ETPS_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_SMCR_ETPS_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+
+#define TIM_SMCR_ECE ((uint32_t)0x00004000) /*!<External clock enable */
+#define TIM_SMCR_ETP ((uint32_t)0x00008000) /*!<External trigger polarity */
+
+/******************* Bit definition for TIM_DIER register ******************/
+#define TIM_DIER_UIE ((uint32_t)0x00000001) /*!<Update interrupt enable */
+#define TIM_DIER_CC1IE ((uint32_t)0x00000002) /*!<Capture/Compare 1 interrupt enable */
+#define TIM_DIER_CC2IE ((uint32_t)0x00000004) /*!<Capture/Compare 2 interrupt enable */
+#define TIM_DIER_CC3IE ((uint32_t)0x00000008) /*!<Capture/Compare 3 interrupt enable */
+#define TIM_DIER_CC4IE ((uint32_t)0x00000010) /*!<Capture/Compare 4 interrupt enable */
+#define TIM_DIER_COMIE ((uint32_t)0x00000020) /*!<COM interrupt enable */
+#define TIM_DIER_TIE ((uint32_t)0x00000040) /*!<Trigger interrupt enable */
+#define TIM_DIER_BIE ((uint32_t)0x00000080) /*!<Break interrupt enable */
+#define TIM_DIER_UDE ((uint32_t)0x00000100) /*!<Update DMA request enable */
+#define TIM_DIER_CC1DE ((uint32_t)0x00000200) /*!<Capture/Compare 1 DMA request enable */
+#define TIM_DIER_CC2DE ((uint32_t)0x00000400) /*!<Capture/Compare 2 DMA request enable */
+#define TIM_DIER_CC3DE ((uint32_t)0x00000800) /*!<Capture/Compare 3 DMA request enable */
+#define TIM_DIER_CC4DE ((uint32_t)0x00001000) /*!<Capture/Compare 4 DMA request enable */
+#define TIM_DIER_COMDE ((uint32_t)0x00002000) /*!<COM DMA request enable */
+#define TIM_DIER_TDE ((uint32_t)0x00004000) /*!<Trigger DMA request enable */
+
+/******************** Bit definition for TIM_SR register *******************/
+#define TIM_SR_UIF ((uint32_t)0x00000001) /*!<Update interrupt Flag */
+#define TIM_SR_CC1IF ((uint32_t)0x00000002) /*!<Capture/Compare 1 interrupt Flag */
+#define TIM_SR_CC2IF ((uint32_t)0x00000004) /*!<Capture/Compare 2 interrupt Flag */
+#define TIM_SR_CC3IF ((uint32_t)0x00000008) /*!<Capture/Compare 3 interrupt Flag */
+#define TIM_SR_CC4IF ((uint32_t)0x00000010) /*!<Capture/Compare 4 interrupt Flag */
+#define TIM_SR_COMIF ((uint32_t)0x00000020) /*!<COM interrupt Flag */
+#define TIM_SR_TIF ((uint32_t)0x00000040) /*!<Trigger interrupt Flag */
+#define TIM_SR_BIF ((uint32_t)0x00000080) /*!<Break interrupt Flag */
+#define TIM_SR_CC1OF ((uint32_t)0x00000200) /*!<Capture/Compare 1 Overcapture Flag */
+#define TIM_SR_CC2OF ((uint32_t)0x00000400) /*!<Capture/Compare 2 Overcapture Flag */
+#define TIM_SR_CC3OF ((uint32_t)0x00000800) /*!<Capture/Compare 3 Overcapture Flag */
+#define TIM_SR_CC4OF ((uint32_t)0x00001000) /*!<Capture/Compare 4 Overcapture Flag */
+
+/******************* Bit definition for TIM_EGR register *******************/
+#define TIM_EGR_UG ((uint32_t)0x00000001) /*!<Update Generation */
+#define TIM_EGR_CC1G ((uint32_t)0x00000002) /*!<Capture/Compare 1 Generation */
+#define TIM_EGR_CC2G ((uint32_t)0x00000004) /*!<Capture/Compare 2 Generation */
+#define TIM_EGR_CC3G ((uint32_t)0x00000008) /*!<Capture/Compare 3 Generation */
+#define TIM_EGR_CC4G ((uint32_t)0x00000010) /*!<Capture/Compare 4 Generation */
+#define TIM_EGR_COMG ((uint32_t)0x00000020) /*!<Capture/Compare Control Update Generation */
+#define TIM_EGR_TG ((uint32_t)0x00000040) /*!<Trigger Generation */
+#define TIM_EGR_BG ((uint32_t)0x00000080) /*!<Break Generation */
+
+/****************** Bit definition for TIM_CCMR1 register ******************/
+#define TIM_CCMR1_CC1S ((uint32_t)0x00000003) /*!<CC1S[1:0] bits (Capture/Compare 1 Selection) */
+#define TIM_CCMR1_CC1S_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_CCMR1_CC1S_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC1FE ((uint32_t)0x00000004) /*!<Output Compare 1 Fast enable */
+#define TIM_CCMR1_OC1PE ((uint32_t)0x00000008) /*!<Output Compare 1 Preload enable */
+
+#define TIM_CCMR1_OC1M ((uint32_t)0x00000070) /*!<OC1M[2:0] bits (Output Compare 1 Mode) */
+#define TIM_CCMR1_OC1M_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR1_OC1M_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR1_OC1M_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CCMR1_OC1CE ((uint32_t)0x00000080) /*!<Output Compare 1Clear Enable */
+
+#define TIM_CCMR1_CC2S ((uint32_t)0x00000300) /*!<CC2S[1:0] bits (Capture/Compare 2 Selection) */
+#define TIM_CCMR1_CC2S_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CCMR1_CC2S_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC2FE ((uint32_t)0x00000400) /*!<Output Compare 2 Fast enable */
+#define TIM_CCMR1_OC2PE ((uint32_t)0x00000800) /*!<Output Compare 2 Preload enable */
+
+#define TIM_CCMR1_OC2M ((uint32_t)0x00007000) /*!<OC2M[2:0] bits (Output Compare 2 Mode) */
+#define TIM_CCMR1_OC2M_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR1_OC2M_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR1_OC2M_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+
+#define TIM_CCMR1_OC2CE ((uint32_t)0x00008000) /*!<Output Compare 2 Clear Enable */
+
+/*---------------------------------------------------------------------------*/
+
+#define TIM_CCMR1_IC1PSC ((uint32_t)0x0000000C) /*!<IC1PSC[1:0] bits (Input Capture 1 Prescaler) */
+#define TIM_CCMR1_IC1PSC_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define TIM_CCMR1_IC1PSC_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC1F ((uint32_t)0x000000F0) /*!<IC1F[3:0] bits (Input Capture 1 Filter) */
+#define TIM_CCMR1_IC1F_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR1_IC1F_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR1_IC1F_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define TIM_CCMR1_IC1F_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define TIM_CCMR1_IC2PSC ((uint32_t)0x00000C00) /*!<IC2PSC[1:0] bits (Input Capture 2 Prescaler) */
+#define TIM_CCMR1_IC2PSC_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define TIM_CCMR1_IC2PSC_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC2F ((uint32_t)0x0000F000) /*!<IC2F[3:0] bits (Input Capture 2 Filter) */
+#define TIM_CCMR1_IC2F_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR1_IC2F_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR1_IC2F_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define TIM_CCMR1_IC2F_3 ((uint32_t)0x00008000) /*!<Bit 3 */
+
+/****************** Bit definition for TIM_CCMR2 register ******************/
+#define TIM_CCMR2_CC3S ((uint32_t)0x00000003) /*!<CC3S[1:0] bits (Capture/Compare 3 Selection) */
+#define TIM_CCMR2_CC3S_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_CCMR2_CC3S_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC3FE ((uint32_t)0x00000004) /*!<Output Compare 3 Fast enable */
+#define TIM_CCMR2_OC3PE ((uint32_t)0x00000008) /*!<Output Compare 3 Preload enable */
+
+#define TIM_CCMR2_OC3M ((uint32_t)0x00000070) /*!<OC3M[2:0] bits (Output Compare 3 Mode) */
+#define TIM_CCMR2_OC3M_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR2_OC3M_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR2_OC3M_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CCMR2_OC3CE ((uint32_t)0x00000080) /*!<Output Compare 3 Clear Enable */
+
+#define TIM_CCMR2_CC4S ((uint32_t)0x00000300) /*!<CC4S[1:0] bits (Capture/Compare 4 Selection) */
+#define TIM_CCMR2_CC4S_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CCMR2_CC4S_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC4FE ((uint32_t)0x00000400) /*!<Output Compare 4 Fast enable */
+#define TIM_CCMR2_OC4PE ((uint32_t)0x00000800) /*!<Output Compare 4 Preload enable */
+
+#define TIM_CCMR2_OC4M ((uint32_t)0x00007000) /*!<OC4M[2:0] bits (Output Compare 4 Mode) */
+#define TIM_CCMR2_OC4M_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR2_OC4M_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR2_OC4M_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+
+#define TIM_CCMR2_OC4CE ((uint32_t)0x00008000) /*!<Output Compare 4 Clear Enable */
+
+/*---------------------------------------------------------------------------*/
+
+#define TIM_CCMR2_IC3PSC ((uint32_t)0x0000000C) /*!<IC3PSC[1:0] bits (Input Capture 3 Prescaler) */
+#define TIM_CCMR2_IC3PSC_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define TIM_CCMR2_IC3PSC_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC3F ((uint32_t)0x000000F0) /*!<IC3F[3:0] bits (Input Capture 3 Filter) */
+#define TIM_CCMR2_IC3F_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR2_IC3F_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR2_IC3F_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define TIM_CCMR2_IC3F_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define TIM_CCMR2_IC4PSC ((uint32_t)0x00000C00) /*!<IC4PSC[1:0] bits (Input Capture 4 Prescaler) */
+#define TIM_CCMR2_IC4PSC_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define TIM_CCMR2_IC4PSC_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC4F ((uint32_t)0x0000F000) /*!<IC4F[3:0] bits (Input Capture 4 Filter) */
+#define TIM_CCMR2_IC4F_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR2_IC4F_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR2_IC4F_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define TIM_CCMR2_IC4F_3 ((uint32_t)0x00008000) /*!<Bit 3 */
+
+/******************* Bit definition for TIM_CCER register ******************/
+#define TIM_CCER_CC1E ((uint32_t)0x00000001) /*!<Capture/Compare 1 output enable */
+#define TIM_CCER_CC1P ((uint32_t)0x00000002) /*!<Capture/Compare 1 output Polarity */
+#define TIM_CCER_CC1NE ((uint32_t)0x00000004) /*!<Capture/Compare 1 Complementary output enable */
+#define TIM_CCER_CC1NP ((uint32_t)0x00000008) /*!<Capture/Compare 1 Complementary output Polarity */
+#define TIM_CCER_CC2E ((uint32_t)0x00000010) /*!<Capture/Compare 2 output enable */
+#define TIM_CCER_CC2P ((uint32_t)0x00000020) /*!<Capture/Compare 2 output Polarity */
+#define TIM_CCER_CC2NE ((uint32_t)0x00000040) /*!<Capture/Compare 2 Complementary output enable */
+#define TIM_CCER_CC2NP ((uint32_t)0x00000080) /*!<Capture/Compare 2 Complementary output Polarity */
+#define TIM_CCER_CC3E ((uint32_t)0x00000100) /*!<Capture/Compare 3 output enable */
+#define TIM_CCER_CC3P ((uint32_t)0x00000200) /*!<Capture/Compare 3 output Polarity */
+#define TIM_CCER_CC3NE ((uint32_t)0x00000400) /*!<Capture/Compare 3 Complementary output enable */
+#define TIM_CCER_CC3NP ((uint32_t)0x00000800) /*!<Capture/Compare 3 Complementary output Polarity */
+#define TIM_CCER_CC4E ((uint32_t)0x00001000) /*!<Capture/Compare 4 output enable */
+#define TIM_CCER_CC4P ((uint32_t)0x00002000) /*!<Capture/Compare 4 output Polarity */
+#define TIM_CCER_CC4NP ((uint32_t)0x00008000) /*!<Capture/Compare 4 Complementary output Polarity */
+
+/******************* Bit definition for TIM_CNT register *******************/
+#define TIM_CNT_CNT ((uint32_t)0xFFFFFFFF) /*!<Counter Value */
+
+/******************* Bit definition for TIM_PSC register *******************/
+#define TIM_PSC_PSC ((uint32_t)0x0000FFFF) /*!<Prescaler Value */
+
+/******************* Bit definition for TIM_ARR register *******************/
+#define TIM_ARR_ARR ((uint32_t)0xFFFFFFFF) /*!<actual auto-reload Value */
+
+/******************* Bit definition for TIM_RCR register *******************/
+#define TIM_RCR_REP ((uint32_t)0x000000FF) /*!<Repetition Counter Value */
+
+/******************* Bit definition for TIM_CCR1 register ******************/
+#define TIM_CCR1_CCR1 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 1 Value */
+
+/******************* Bit definition for TIM_CCR2 register ******************/
+#define TIM_CCR2_CCR2 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 2 Value */
+
+/******************* Bit definition for TIM_CCR3 register ******************/
+#define TIM_CCR3_CCR3 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 3 Value */
+
+/******************* Bit definition for TIM_CCR4 register ******************/
+#define TIM_CCR4_CCR4 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 4 Value */
+
+/******************* Bit definition for TIM_BDTR register ******************/
+#define TIM_BDTR_DTG ((uint32_t)0x000000FF) /*!<DTG[0:7] bits (Dead-Time Generator set-up) */
+#define TIM_BDTR_DTG_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_BDTR_DTG_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_BDTR_DTG_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define TIM_BDTR_DTG_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define TIM_BDTR_DTG_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define TIM_BDTR_DTG_5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define TIM_BDTR_DTG_6 ((uint32_t)0x00000040) /*!<Bit 6 */
+#define TIM_BDTR_DTG_7 ((uint32_t)0x00000080) /*!<Bit 7 */
+
+#define TIM_BDTR_LOCK ((uint32_t)0x00000300) /*!<LOCK[1:0] bits (Lock Configuration) */
+#define TIM_BDTR_LOCK_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_BDTR_LOCK_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_BDTR_OSSI ((uint32_t)0x00000400) /*!<Off-State Selection for Idle mode */
+#define TIM_BDTR_OSSR ((uint32_t)0x00000800) /*!<Off-State Selection for Run mode */
+#define TIM_BDTR_BKE ((uint32_t)0x00001000) /*!<Break enable */
+#define TIM_BDTR_BKP ((uint32_t)0x00002000) /*!<Break Polarity */
+#define TIM_BDTR_AOE ((uint32_t)0x00004000) /*!<Automatic Output enable */
+#define TIM_BDTR_MOE ((uint32_t)0x00008000) /*!<Main Output enable */
+
+/******************* Bit definition for TIM_DCR register *******************/
+#define TIM_DCR_DBA ((uint32_t)0x0000001F) /*!<DBA[4:0] bits (DMA Base Address) */
+#define TIM_DCR_DBA_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_DCR_DBA_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_DCR_DBA_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define TIM_DCR_DBA_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define TIM_DCR_DBA_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+
+#define TIM_DCR_DBL ((uint32_t)0x00001F00) /*!<DBL[4:0] bits (DMA Burst Length) */
+#define TIM_DCR_DBL_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_DCR_DBL_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define TIM_DCR_DBL_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define TIM_DCR_DBL_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define TIM_DCR_DBL_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+
+/******************* Bit definition for TIM_DMAR register ******************/
+#define TIM_DMAR_DMAB ((uint32_t)0x0000FFFF) /*!<DMA register for burst accesses */
+
+/******************* Bit definition for TIM14_OR register ********************/
+#define TIM14_OR_TI1_RMP ((uint32_t)0x00000003) /*!<TI1_RMP[1:0] bits (TIM14 Input 4 remap) */
+#define TIM14_OR_TI1_RMP_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM14_OR_TI1_RMP_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+/******************************************************************************/
+/* */
+/* Universal Synchronous Asynchronous Receiver Transmitter (USART) */
+/* */
+/******************************************************************************/
+/****************** Bit definition for USART_CR1 register *******************/
+#define USART_CR1_UE ((uint32_t)0x00000001) /*!< USART Enable */
+#define USART_CR1_RE ((uint32_t)0x00000004) /*!< Receiver Enable */
+#define USART_CR1_TE ((uint32_t)0x00000008) /*!< Transmitter Enable */
+#define USART_CR1_IDLEIE ((uint32_t)0x00000010) /*!< IDLE Interrupt Enable */
+#define USART_CR1_RXNEIE ((uint32_t)0x00000020) /*!< RXNE Interrupt Enable */
+#define USART_CR1_TCIE ((uint32_t)0x00000040) /*!< Transmission Complete Interrupt Enable */
+#define USART_CR1_TXEIE ((uint32_t)0x00000080) /*!< TXE Interrupt Enable */
+#define USART_CR1_PEIE ((uint32_t)0x00000100) /*!< PE Interrupt Enable */
+#define USART_CR1_PS ((uint32_t)0x00000200) /*!< Parity Selection */
+#define USART_CR1_PCE ((uint32_t)0x00000400) /*!< Parity Control Enable */
+#define USART_CR1_WAKE ((uint32_t)0x00000800) /*!< Receiver Wakeup method */
+#define USART_CR1_M0 ((uint32_t)0x00001000) /*!< Word length bit 0 */
+#define USART_CR1_MME ((uint32_t)0x00002000) /*!< Mute Mode Enable */
+#define USART_CR1_CMIE ((uint32_t)0x00004000) /*!< Character match interrupt enable */
+#define USART_CR1_OVER8 ((uint32_t)0x00008000) /*!< Oversampling by 8-bit or 16-bit mode */
+#define USART_CR1_DEDT ((uint32_t)0x001F0000) /*!< DEDT[4:0] bits (Driver Enable Deassertion Time) */
+#define USART_CR1_DEDT_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define USART_CR1_DEDT_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define USART_CR1_DEDT_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define USART_CR1_DEDT_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+#define USART_CR1_DEDT_4 ((uint32_t)0x00100000) /*!< Bit 4 */
+#define USART_CR1_DEAT ((uint32_t)0x03E00000) /*!< DEAT[4:0] bits (Driver Enable Assertion Time) */
+#define USART_CR1_DEAT_0 ((uint32_t)0x00200000) /*!< Bit 0 */
+#define USART_CR1_DEAT_1 ((uint32_t)0x00400000) /*!< Bit 1 */
+#define USART_CR1_DEAT_2 ((uint32_t)0x00800000) /*!< Bit 2 */
+#define USART_CR1_DEAT_3 ((uint32_t)0x01000000) /*!< Bit 3 */
+#define USART_CR1_DEAT_4 ((uint32_t)0x02000000) /*!< Bit 4 */
+#define USART_CR1_RTOIE ((uint32_t)0x04000000) /*!< Receive Time Out interrupt enable */
+#define USART_CR1_EOBIE ((uint32_t)0x08000000) /*!< End of Block interrupt enable */
+#define USART_CR1_M1 ((uint32_t)0x10000000) /*!< Word length bit 1 */
+#define USART_CR1_M ((uint32_t)0x10001000) /*!< [M1:M0] Word length */
+
+/****************** Bit definition for USART_CR2 register *******************/
+#define USART_CR2_ADDM7 ((uint32_t)0x00000010) /*!< 7-bit or 4-bit Address Detection */
+#define USART_CR2_LBCL ((uint32_t)0x00000100) /*!< Last Bit Clock pulse */
+#define USART_CR2_CPHA ((uint32_t)0x00000200) /*!< Clock Phase */
+#define USART_CR2_CPOL ((uint32_t)0x00000400) /*!< Clock Polarity */
+#define USART_CR2_CLKEN ((uint32_t)0x00000800) /*!< Clock Enable */
+#define USART_CR2_STOP ((uint32_t)0x00003000) /*!< STOP[1:0] bits (STOP bits) */
+#define USART_CR2_STOP_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define USART_CR2_STOP_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+#define USART_CR2_LINEN ((uint32_t)0x00004000) /*!< Keep for compatibility */
+#define USART_CR2_SWAP ((uint32_t)0x00008000) /*!< SWAP TX/RX pins */
+#define USART_CR2_RXINV ((uint32_t)0x00010000) /*!< RX pin active level inversion */
+#define USART_CR2_TXINV ((uint32_t)0x00020000) /*!< TX pin active level inversion */
+#define USART_CR2_DATAINV ((uint32_t)0x00040000) /*!< Binary data inversion */
+#define USART_CR2_MSBFIRST ((uint32_t)0x00080000) /*!< Most Significant Bit First */
+#define USART_CR2_ABREN ((uint32_t)0x00100000) /*!< Auto Baud-Rate Enable*/
+#define USART_CR2_ABRMODE ((uint32_t)0x00600000) /*!< ABRMOD[1:0] bits (Auto Baud-Rate Mode) */
+#define USART_CR2_ABRMODE_0 ((uint32_t)0x00200000) /*!< Bit 0 */
+#define USART_CR2_ABRMODE_1 ((uint32_t)0x00400000) /*!< Bit 1 */
+#define USART_CR2_RTOEN ((uint32_t)0x00800000) /*!< Receiver Time-Out enable */
+#define USART_CR2_ADD ((uint32_t)0xFF000000) /*!< Address of the USART node */
+
+/****************** Bit definition for USART_CR3 register *******************/
+#define USART_CR3_EIE ((uint32_t)0x00000001) /*!< Error Interrupt Enable */
+#define USART_CR3_IREN ((uint32_t)0x00000002) /*!< Keep for compatibility */
+#define USART_CR3_HDSEL ((uint32_t)0x00000008) /*!< Half-Duplex Selection */
+#define USART_CR3_SCEN ((uint32_t)0x00000020) /*!< Keep for compatibility */
+#define USART_CR3_DMAR ((uint32_t)0x00000040) /*!< DMA Enable Receiver */
+#define USART_CR3_DMAT ((uint32_t)0x00000080) /*!< DMA Enable Transmitter */
+#define USART_CR3_RTSE ((uint32_t)0x00000100) /*!< RTS Enable */
+#define USART_CR3_CTSE ((uint32_t)0x00000200) /*!< CTS Enable */
+#define USART_CR3_CTSIE ((uint32_t)0x00000400) /*!< CTS Interrupt Enable */
+#define USART_CR3_ONEBIT ((uint32_t)0x00000800) /*!< One sample bit method enable */
+#define USART_CR3_OVRDIS ((uint32_t)0x00001000) /*!< Overrun Disable */
+#define USART_CR3_DDRE ((uint32_t)0x00002000) /*!< DMA Disable on Reception Error */
+#define USART_CR3_DEM ((uint32_t)0x00004000) /*!< Driver Enable Mode */
+#define USART_CR3_DEP ((uint32_t)0x00008000) /*!< Driver Enable Polarity Selection */
+
+/****************** Bit definition for USART_BRR register *******************/
+#define USART_BRR_DIV_FRACTION ((uint32_t)0x0000000F) /*!< Fraction of USARTDIV */
+#define USART_BRR_DIV_MANTISSA ((uint32_t)0x0000FFF0) /*!< Mantissa of USARTDIV */
+
+/****************** Bit definition for USART_GTPR register ******************/
+#define USART_GTPR_PSC ((uint32_t)0x000000FF) /*!< PSC[7:0] bits (Prescaler value) */
+#define USART_GTPR_GT ((uint32_t)0x0000FF00) /*!< GT[7:0] bits (Guard time value) */
+
+
+/******************* Bit definition for USART_RTOR register *****************/
+#define USART_RTOR_RTO ((uint32_t)0x00FFFFFF) /*!< Receiver Time Out Value */
+#define USART_RTOR_BLEN ((uint32_t)0xFF000000) /*!< Block Length */
+
+/******************* Bit definition for USART_RQR register ******************/
+#define USART_RQR_ABRRQ ((uint32_t)0x00000001) /*!< Auto-Baud Rate Request */
+#define USART_RQR_SBKRQ ((uint32_t)0x00000002) /*!< Send Break Request */
+#define USART_RQR_MMRQ ((uint32_t)0x00000004) /*!< Mute Mode Request */
+#define USART_RQR_RXFRQ ((uint32_t)0x00000008) /*!< Receive Data flush Request */
+
+/******************* Bit definition for USART_ISR register ******************/
+#define USART_ISR_PE ((uint32_t)0x00000001) /*!< Parity Error */
+#define USART_ISR_FE ((uint32_t)0x00000002) /*!< Framing Error */
+#define USART_ISR_NE ((uint32_t)0x00000004) /*!< Noise detected Flag */
+#define USART_ISR_ORE ((uint32_t)0x00000008) /*!< OverRun Error */
+#define USART_ISR_IDLE ((uint32_t)0x00000010) /*!< IDLE line detected */
+#define USART_ISR_RXNE ((uint32_t)0x00000020) /*!< Read Data Register Not Empty */
+#define USART_ISR_TC ((uint32_t)0x00000040) /*!< Transmission Complete */
+#define USART_ISR_TXE ((uint32_t)0x00000080) /*!< Transmit Data Register Empty */
+#define USART_ISR_CTSIF ((uint32_t)0x00000200) /*!< CTS interrupt flag */
+#define USART_ISR_CTS ((uint32_t)0x00000400) /*!< CTS flag */
+#define USART_ISR_RTOF ((uint32_t)0x00000800) /*!< Receiver Time Out */
+#define USART_ISR_EOBF ((uint32_t)0x00001000) /*!< End Of Block Flag */
+#define USART_ISR_ABRE ((uint32_t)0x00004000) /*!< Auto-Baud Rate Error */
+#define USART_ISR_ABRF ((uint32_t)0x00008000) /*!< Auto-Baud Rate Flag */
+#define USART_ISR_BUSY ((uint32_t)0x00010000) /*!< Busy Flag */
+#define USART_ISR_CMF ((uint32_t)0x00020000) /*!< Character Match Flag */
+#define USART_ISR_SBKF ((uint32_t)0x00040000) /*!< Send Break Flag */
+#define USART_ISR_TEACK ((uint32_t)0x00200000) /*!< Transmit Enable Acknowledge Flag */
+#define USART_ISR_REACK ((uint32_t)0x00400000) /*!< Receive Enable Acknowledge Flag */
+
+/******************* Bit definition for USART_ICR register ******************/
+#define USART_ICR_PECF ((uint32_t)0x00000001) /*!< Parity Error Clear Flag */
+#define USART_ICR_FECF ((uint32_t)0x00000002) /*!< Framing Error Clear Flag */
+#define USART_ICR_NCF ((uint32_t)0x00000004) /*!< Noise detected Clear Flag */
+#define USART_ICR_ORECF ((uint32_t)0x00000008) /*!< OverRun Error Clear Flag */
+#define USART_ICR_IDLECF ((uint32_t)0x00000010) /*!< IDLE line detected Clear Flag */
+#define USART_ICR_TCCF ((uint32_t)0x00000040) /*!< Transmission Complete Clear Flag */
+#define USART_ICR_CTSCF ((uint32_t)0x00000200) /*!< CTS Interrupt Clear Flag */
+#define USART_ICR_RTOCF ((uint32_t)0x00000800) /*!< Receiver Time Out Clear Flag */
+#define USART_ICR_CMCF ((uint32_t)0x00020000) /*!< Character Match Clear Flag */
+
+/******************* Bit definition for USART_RDR register ******************/
+#define USART_RDR_RDR ((uint16_t)0x01FF) /*!< RDR[8:0] bits (Receive Data value) */
+
+/******************* Bit definition for USART_TDR register ******************/
+#define USART_TDR_TDR ((uint16_t)0x01FF) /*!< TDR[8:0] bits (Transmit Data value) */
+
+/******************************************************************************/
+/* */
+/* USB Device General registers */
+/* */
+/******************************************************************************/
+#define USB_CNTR (USB_BASE + 0x40) /*!< Control register */
+#define USB_ISTR (USB_BASE + 0x44) /*!< Interrupt status register */
+#define USB_FNR (USB_BASE + 0x48) /*!< Frame number register */
+#define USB_DADDR (USB_BASE + 0x4C) /*!< Device address register */
+#define USB_BTABLE (USB_BASE + 0x50) /*!< Buffer Table address register */
+#define USB_LPMCSR (USB_BASE + 0x54) /*!< LPM Control and Status register */
+#define USB_BCDR (USB_BASE + 0x58) /*!< Battery Charging detector register*/
+
+/**************************** ISTR interrupt events *************************/
+#define USB_ISTR_CTR ((uint16_t)0x8000) /*!< Correct TRansfer (clear-only bit) */
+#define USB_ISTR_PMAOVR ((uint16_t)0x4000) /*!< DMA OVeR/underrun (clear-only bit) */
+#define USB_ISTR_ERR ((uint16_t)0x2000) /*!< ERRor (clear-only bit) */
+#define USB_ISTR_WKUP ((uint16_t)0x1000) /*!< WaKe UP (clear-only bit) */
+#define USB_ISTR_SUSP ((uint16_t)0x0800) /*!< SUSPend (clear-only bit) */
+#define USB_ISTR_RESET ((uint16_t)0x0400) /*!< RESET (clear-only bit) */
+#define USB_ISTR_SOF ((uint16_t)0x0200) /*!< Start Of Frame (clear-only bit) */
+#define USB_ISTR_ESOF ((uint16_t)0x0100) /*!< Expected Start Of Frame (clear-only bit) */
+#define USB_ISTR_L1REQ ((uint16_t)0x0080) /*!< LPM L1 state request */
+#define USB_ISTR_DIR ((uint16_t)0x0010) /*!< DIRection of transaction (read-only bit) */
+#define USB_ISTR_EP_ID ((uint16_t)0x000F) /*!< EndPoint IDentifier (read-only bit) */
+
+#define USB_CLR_CTR (~USB_ISTR_CTR) /*!< clear Correct TRansfer bit */
+#define USB_CLR_PMAOVR (~USB_ISTR_PMAOVR) /*!< clear DMA OVeR/underrun bit*/
+#define USB_CLR_ERR (~USB_ISTR_ERR) /*!< clear ERRor bit */
+#define USB_CLR_WKUP (~USB_ISTR_WKUP) /*!< clear WaKe UP bit */
+#define USB_CLR_SUSP (~USB_ISTR_SUSP) /*!< clear SUSPend bit */
+#define USB_CLR_RESET (~USB_ISTR_RESET) /*!< clear RESET bit */
+#define USB_CLR_SOF (~USB_ISTR_SOF) /*!< clear Start Of Frame bit */
+#define USB_CLR_ESOF (~USB_ISTR_ESOF) /*!< clear Expected Start Of Frame bit */
+#define USB_CLR_L1REQ (~USB_ISTR_L1REQ) /*!< clear LPM L1 bit */
+
+/************************* CNTR control register bits definitions ***********/
+#define USB_CNTR_CTRM ((uint16_t)0x8000) /*!< Correct TRansfer Mask */
+#define USB_CNTR_PMAOVRM ((uint16_t)0x4000) /*!< DMA OVeR/underrun Mask */
+#define USB_CNTR_ERRM ((uint16_t)0x2000) /*!< ERRor Mask */
+#define USB_CNTR_WKUPM ((uint16_t)0x1000) /*!< WaKe UP Mask */
+#define USB_CNTR_SUSPM ((uint16_t)0x0800) /*!< SUSPend Mask */
+#define USB_CNTR_RESETM ((uint16_t)0x0400) /*!< RESET Mask */
+#define USB_CNTR_SOFM ((uint16_t)0x0200) /*!< Start Of Frame Mask */
+#define USB_CNTR_ESOFM ((uint16_t)0x0100) /*!< Expected Start Of Frame Mask */
+#define USB_CNTR_L1REQM ((uint16_t)0x0080) /*!< LPM L1 state request interrupt mask */
+#define USB_CNTR_L1RESUME ((uint16_t)0x0020) /*!< LPM L1 Resume request */
+#define USB_CNTR_RESUME ((uint16_t)0x0010) /*!< RESUME request */
+#define USB_CNTR_FSUSP ((uint16_t)0x0008) /*!< Force SUSPend */
+#define USB_CNTR_LPMODE ((uint16_t)0x0004) /*!< Low-power MODE */
+#define USB_CNTR_PDWN ((uint16_t)0x0002) /*!< Power DoWN */
+#define USB_CNTR_FRES ((uint16_t)0x0001) /*!< Force USB RESet */
+
+/************************* BCDR control register bits definitions ***********/
+#define USB_BCDR_DPPU ((uint16_t)0x8000) /*!< DP Pull-up Enable */
+#define USB_BCDR_PS2DET ((uint16_t)0x0080) /*!< PS2 port or proprietary charger detected */
+#define USB_BCDR_SDET ((uint16_t)0x0040) /*!< Secondary detection (SD) status */
+#define USB_BCDR_PDET ((uint16_t)0x0020) /*!< Primary detection (PD) status */
+#define USB_BCDR_DCDET ((uint16_t)0x0010) /*!< Data contact detection (DCD) status */
+#define USB_BCDR_SDEN ((uint16_t)0x0008) /*!< Secondary detection (SD) mode enable */
+#define USB_BCDR_PDEN ((uint16_t)0x0004) /*!< Primary detection (PD) mode enable */
+#define USB_BCDR_DCDEN ((uint16_t)0x0002) /*!< Data contact detection (DCD) mode enable */
+#define USB_BCDR_BCDEN ((uint16_t)0x0001) /*!< Battery charging detector (BCD) enable */
+
+/*************************** LPM register bits definitions ******************/
+#define USB_LPMCSR_BESL ((uint16_t)0x00F0) /*!< BESL value received with last ACKed LPM Token */
+#define USB_LPMCSR_REMWAKE ((uint16_t)0x0008) /*!< bRemoteWake value received with last ACKed LPM Token */
+#define USB_LPMCSR_LPMACK ((uint16_t)0x0002) /*!< LPM Token acknowledge enable*/
+#define USB_LPMCSR_LMPEN ((uint16_t)0x0001) /*!< LPM support enable */
+
+/******************** FNR Frame Number Register bit definitions ************/
+#define USB_FNR_RXDP ((uint16_t)0x8000) /*!< status of D+ data line */
+#define USB_FNR_RXDM ((uint16_t)0x4000) /*!< status of D- data line */
+#define USB_FNR_LCK ((uint16_t)0x2000) /*!< LoCKed */
+#define USB_FNR_LSOF ((uint16_t)0x1800) /*!< Lost SOF */
+#define USB_FNR_FN ((uint16_t)0x07FF) /*!< Frame Number */
+
+/******************** DADDR Device ADDRess bit definitions ****************/
+#define USB_DADDR_EF ((uint8_t)0x80) /*!< USB device address Enable Function */
+#define USB_DADDR_ADD ((uint8_t)0x7F) /*!< USB device address */
+
+/****************************** Endpoint register *************************/
+#define USB_EP0R USB_BASE /*!< endpoint 0 register address */
+#define USB_EP1R (USB_BASE + 0x04) /*!< endpoint 1 register address */
+#define USB_EP2R (USB_BASE + 0x08) /*!< endpoint 2 register address */
+#define USB_EP3R (USB_BASE + 0x0C) /*!< endpoint 3 register address */
+#define USB_EP4R (USB_BASE + 0x10) /*!< endpoint 4 register address */
+#define USB_EP5R (USB_BASE + 0x14) /*!< endpoint 5 register address */
+#define USB_EP6R (USB_BASE + 0x18) /*!< endpoint 6 register address */
+#define USB_EP7R (USB_BASE + 0x1C) /*!< endpoint 7 register address */
+/* bit positions */
+#define USB_EP_CTR_RX ((uint16_t)0x8000) /*!< EndPoint Correct TRansfer RX */
+#define USB_EP_DTOG_RX ((uint16_t)0x4000) /*!< EndPoint Data TOGGLE RX */
+#define USB_EPRX_STAT ((uint16_t)0x3000) /*!< EndPoint RX STATus bit field */
+#define USB_EP_SETUP ((uint16_t)0x0800) /*!< EndPoint SETUP */
+#define USB_EP_T_FIELD ((uint16_t)0x0600) /*!< EndPoint TYPE */
+#define USB_EP_KIND ((uint16_t)0x0100) /*!< EndPoint KIND */
+#define USB_EP_CTR_TX ((uint16_t)0x0080) /*!< EndPoint Correct TRansfer TX */
+#define USB_EP_DTOG_TX ((uint16_t)0x0040) /*!< EndPoint Data TOGGLE TX */
+#define USB_EPTX_STAT ((uint16_t)0x0030) /*!< EndPoint TX STATus bit field */
+#define USB_EPADDR_FIELD ((uint16_t)0x000F) /*!< EndPoint ADDRess FIELD */
+
+/* EndPoint REGister MASK (no toggle fields) */
+#define USB_EPREG_MASK (USB_EP_CTR_RX|USB_EP_SETUP|USB_EP_T_FIELD|USB_EP_KIND|USB_EP_CTR_TX|USB_EPADDR_FIELD)
+ /*!< EP_TYPE[1:0] EndPoint TYPE */
+#define USB_EP_TYPE_MASK ((uint16_t)0x0600) /*!< EndPoint TYPE Mask */
+#define USB_EP_BULK ((uint16_t)0x0000) /*!< EndPoint BULK */
+#define USB_EP_CONTROL ((uint16_t)0x0200) /*!< EndPoint CONTROL */
+#define USB_EP_ISOCHRONOUS ((uint16_t)0x0400) /*!< EndPoint ISOCHRONOUS */
+#define USB_EP_INTERRUPT ((uint16_t)0x0600) /*!< EndPoint INTERRUPT */
+#define USB_EP_T_MASK (~USB_EP_T_FIELD & USB_EPREG_MASK)
+
+#define USB_EPKIND_MASK (~USB_EP_KIND & USB_EPREG_MASK) /*!< EP_KIND EndPoint KIND */
+ /*!< STAT_TX[1:0] STATus for TX transfer */
+#define USB_EP_TX_DIS ((uint16_t)0x0000) /*!< EndPoint TX DISabled */
+#define USB_EP_TX_STALL ((uint16_t)0x0010) /*!< EndPoint TX STALLed */
+#define USB_EP_TX_NAK ((uint16_t)0x0020) /*!< EndPoint TX NAKed */
+#define USB_EP_TX_VALID ((uint16_t)0x0030) /*!< EndPoint TX VALID */
+#define USB_EPTX_DTOG1 ((uint16_t)0x0010) /*!< EndPoint TX Data TOGgle bit1 */
+#define USB_EPTX_DTOG2 ((uint16_t)0x0020) /*!< EndPoint TX Data TOGgle bit2 */
+#define USB_EPTX_DTOGMASK (USB_EPTX_STAT|USB_EPREG_MASK)
+ /*!< STAT_RX[1:0] STATus for RX transfer */
+#define USB_EP_RX_DIS ((uint16_t)0x0000) /*!< EndPoint RX DISabled */
+#define USB_EP_RX_STALL ((uint16_t)0x1000) /*!< EndPoint RX STALLed */
+#define USB_EP_RX_NAK ((uint16_t)0x2000) /*!< EndPoint RX NAKed */
+#define USB_EP_RX_VALID ((uint16_t)0x3000) /*!< EndPoint RX VALID */
+#define USB_EPRX_DTOG1 ((uint16_t)0x1000) /*!< EndPoint RX Data TOGgle bit1 */
+#define USB_EPRX_DTOG2 ((uint16_t)0x2000) /*!< EndPoint RX Data TOGgle bit1 */
+#define USB_EPRX_DTOGMASK (USB_EPRX_STAT|USB_EPREG_MASK)
+
+/******************************************************************************/
+/* */
+/* Window WATCHDOG (WWDG) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for WWDG_CR register ********************/
+#define WWDG_CR_T ((uint32_t)0x7F) /*!<T[6:0] bits (7-Bit counter (MSB to LSB)) */
+#define WWDG_CR_T0 ((uint32_t)0x01) /*!<Bit 0 */
+#define WWDG_CR_T1 ((uint32_t)0x02) /*!<Bit 1 */
+#define WWDG_CR_T2 ((uint32_t)0x04) /*!<Bit 2 */
+#define WWDG_CR_T3 ((uint32_t)0x08) /*!<Bit 3 */
+#define WWDG_CR_T4 ((uint32_t)0x10) /*!<Bit 4 */
+#define WWDG_CR_T5 ((uint32_t)0x20) /*!<Bit 5 */
+#define WWDG_CR_T6 ((uint32_t)0x40) /*!<Bit 6 */
+
+#define WWDG_CR_WDGA ((uint32_t)0x80) /*!<Activation bit */
+
+/******************* Bit definition for WWDG_CFR register *******************/
+#define WWDG_CFR_W ((uint32_t)0x007F) /*!<W[6:0] bits (7-bit window value) */
+#define WWDG_CFR_W0 ((uint32_t)0x0001) /*!<Bit 0 */
+#define WWDG_CFR_W1 ((uint32_t)0x0002) /*!<Bit 1 */
+#define WWDG_CFR_W2 ((uint32_t)0x0004) /*!<Bit 2 */
+#define WWDG_CFR_W3 ((uint32_t)0x0008) /*!<Bit 3 */
+#define WWDG_CFR_W4 ((uint32_t)0x0010) /*!<Bit 4 */
+#define WWDG_CFR_W5 ((uint32_t)0x0020) /*!<Bit 5 */
+#define WWDG_CFR_W6 ((uint32_t)0x0040) /*!<Bit 6 */
+
+#define WWDG_CFR_WDGTB ((uint32_t)0x0180) /*!<WDGTB[1:0] bits (Timer Base) */
+#define WWDG_CFR_WDGTB0 ((uint32_t)0x0080) /*!<Bit 0 */
+#define WWDG_CFR_WDGTB1 ((uint32_t)0x0100) /*!<Bit 1 */
+
+#define WWDG_CFR_EWI ((uint32_t)0x0200) /*!<Early Wakeup Interrupt */
+
+/******************* Bit definition for WWDG_SR register ********************/
+#define WWDG_SR_EWIF ((uint32_t)0x01) /*!<Early Wakeup Interrupt Flag */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+
+/** @addtogroup Exported_macro
+ * @{
+ */
+
+/****************************** ADC Instances *********************************/
+#define IS_ADC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == ADC1)
+
+#define IS_ADC_COMMON_INSTANCE(INSTANCE) ((INSTANCE) == ADC)
+
+/****************************** CRC Instances *********************************/
+#define IS_CRC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CRC)
+
+/******************************* DMA Instances ******************************/
+#define IS_DMA_ALL_INSTANCE(INSTANCE) (((INSTANCE) == DMA1_Channel1) || \
+ ((INSTANCE) == DMA1_Channel2) || \
+ ((INSTANCE) == DMA1_Channel3) || \
+ ((INSTANCE) == DMA1_Channel4) || \
+ ((INSTANCE) == DMA1_Channel5))
+
+/****************************** GPIO Instances ********************************/
+#define IS_GPIO_ALL_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB) || \
+ ((INSTANCE) == GPIOC) || \
+ ((INSTANCE) == GPIOD) || \
+ ((INSTANCE) == GPIOF))
+
+#define IS_GPIO_AF_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB) || \
+ ((INSTANCE) == GPIOC) || \
+ ((INSTANCE) == GPIOD) || \
+ ((INSTANCE) == GPIOF))
+
+/****************************** GPIO Lock Instances ****************************/
+#define IS_GPIO_LOCK_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB))
+
+/****************************** I2C Instances *********************************/
+#define IS_I2C_ALL_INSTANCE(INSTANCE) (((INSTANCE) == I2C1) || \
+ ((INSTANCE) == I2C2))
+
+/****************************** IWDG Instances ********************************/
+#define IS_IWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == IWDG)
+
+/****************************** RTC Instances *********************************/
+#define IS_RTC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == RTC)
+
+/****************************** SMBUS Instances *********************************/
+#define IS_SMBUS_ALL_INSTANCE(INSTANCE) ((INSTANCE) == I2C1)
+
+/****************************** SPI Instances *********************************/
+#define IS_SPI_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
+ ((INSTANCE) == SPI2))
+
+/****************************** TIM Instances *********************************/
+#define IS_TIM_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM6) || \
+ ((INSTANCE) == TIM7) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CC1_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CC2_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_CC3_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CC4_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_TIX_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_ENCODER_INTERFACE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_HALL_INTERFACE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1))
+
+#define IS_TIM_XOR_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_MASTER_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM6) || \
+ ((INSTANCE) == TIM7) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_SLAVE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_32B_COUNTER_INSTANCE(INSTANCE)(0)
+
+#define IS_TIM_DMABURST_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_BREAK_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CCX_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM3) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM14) && \
+ (((CHANNEL) == TIM_CHANNEL_1))) \
+ || \
+ (((INSTANCE) == TIM15) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))) \
+ || \
+ (((INSTANCE) == TIM16) && \
+ (((CHANNEL) == TIM_CHANNEL_1))) \
+ || \
+ (((INSTANCE) == TIM17) && \
+ (((CHANNEL) == TIM_CHANNEL_1))))
+
+#define IS_TIM_CCXN_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3))) \
+ || \
+ (((INSTANCE) == TIM15) && \
+ ((CHANNEL) == TIM_CHANNEL_1)) \
+ || \
+ (((INSTANCE) == TIM16) && \
+ ((CHANNEL) == TIM_CHANNEL_1)) \
+ || \
+ (((INSTANCE) == TIM17) && \
+ ((CHANNEL) == TIM_CHANNEL_1)))
+
+#define IS_TIM_COUNTER_MODE_SELECT_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_REPETITION_COUNTER_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CLOCK_DIVISION_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_DMA_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM6) || \
+ ((INSTANCE) == TIM7) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_DMA_CC_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_COMMUTATION_EVENT_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_REMAP_INSTANCE(INSTANCE)\
+ ((INSTANCE) == TIM14)
+
+/******************** USART Instances : Synchronous mode **********************/
+#define IS_USART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3) || \
+ ((INSTANCE) == USART4))
+
+/******************** USART Instances : auto Baud rate detection **************/
+#define IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/******************** UART Instances : Asynchronous mode **********************/
+#define IS_UART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3) || \
+ ((INSTANCE) == USART4))
+
+/******************** UART Instances : Half-Duplex mode **********************/
+#define IS_UART_HALFDUPLEX_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3) || \
+ ((INSTANCE) == USART4))
+
+/****************** UART Instances : Hardware Flow control ********************/
+#define IS_UART_HWFLOW_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3) || \
+ ((INSTANCE) == USART4))
+
+/****************** UART Instances : Auto Baud Rate detection ********************/
+#define IS_UART_AUTOBAUDRATE_DETECTION_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+
+/****************** UART Instances : Driver enable detection ********************/
+#define IS_UART_DRIVER_ENABLE_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3) || \
+ ((INSTANCE) == USART4))
+
+/****************************** USB Instances ********************************/
+#define IS_USB_ALL_INSTANCE(INSTANCE) ((INSTANCE) == USB)
+
+/****************************** WWDG Instances ********************************/
+#define IS_WWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == WWDG)
+
+/**
+ * @}
+ */
+
+
+/******************************************************************************/
+/* For a painless codes migration between the STM32F0xx device product */
+/* lines, the aliases defined below are put in place to overcome the */
+/* differences in the interrupt handlers and IRQn definitions. */
+/* No need to update developed interrupt code when moving across */
+/* product lines within the same STM32F0 Family */
+/******************************************************************************/
+
+/* Aliases for __IRQn */
+#define RCC_CRS_IRQn RCC_IRQn
+#define DMA1_Ch1_IRQn DMA1_Channel1_IRQn
+#define DMA1_Ch2_3_DMA2_Ch1_2_IRQn DMA1_Channel2_3_IRQn
+#define DMA1_Ch4_7_DMA2_Ch3_5_IRQn DMA1_Channel4_5_IRQn
+#define DMA1_Channel4_5_6_7_IRQn DMA1_Channel4_5_IRQn
+#define ADC1_COMP_IRQn ADC1_IRQn
+#define TIM6_DAC_IRQn TIM6_IRQn
+#define USART3_8_IRQn USART3_4_IRQn
+#define USART3_6_IRQn USART3_4_IRQn
+
+/* Aliases for __IRQHandler */
+#define RCC_CRS_IRQHandler RCC_IRQHandler
+#define DMA1_Ch1_IRQHandler DMA1_Channel1_IRQHandler
+#define DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler DMA1_Channel2_3_IRQHandler
+#define DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler DMA1_Channel4_5_IRQHandler
+#define DMA1_Channel4_5_6_7_IRQHandler DMA1_Channel4_5_IRQHandler
+#define ADC1_COMP_IRQHandler ADC1_IRQHandler
+#define TIM6_DAC_IRQHandler TIM6_IRQHandler
+#define USART3_8_IRQHandler USART3_4_IRQHandler
+#define USART3_6_IRQHandler USART3_4_IRQHandler
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F070xB_H */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/include/devices/stm32f071xb.h b/f0/include/devices/stm32f071xb.h
new file mode 100755
index 0000000000000000000000000000000000000000..21af15cd446f40bb01a86daf34cc1011d5fdbff8
--- /dev/null
+++ b/f0/include/devices/stm32f071xb.h
@@ -0,0 +1,4066 @@
+/**
+ ******************************************************************************
+ * @file stm32f071xb.h
+ * @author MCD Application Team
+ * @version V2.2.1
+ * @date 09-January-2015
+ * @brief CMSIS STM32F071x8/STM32F071xB devices Peripheral Access Layer Header File.
+ *
+ * This file contains:
+ * - Data structures and the address mapping for all peripherals
+ * - Peripheral's registers declarations and bits definition
+ * - Macros to access peripheral’s registers hardware
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS_Device
+ * @{
+ */
+
+/** @addtogroup stm32f071xb
+ * @{
+ */
+
+#ifndef __STM32F071xB_H
+#define __STM32F071xB_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+
+/**
+ * @brief Configuration of the Cortex-M0 Processor and Core Peripherals
+ */
+#define __CM0_REV 0 /*!< Core Revision r0p0 */
+#define __MPU_PRESENT 0 /*!< STM32F0xx do not provide MPU */
+#define __NVIC_PRIO_BITS 2 /*!< STM32F0xx uses 2 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F071x8/STM32F071xB device Interrupt Number Definition
+ */
+typedef enum
+{
+/****** Cortex-M0 Processor Exceptions Numbers **************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */
+ SVC_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */
+
+/****** STM32F071x8/STM32F071xB specific Interrupt Numbers **************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ PVD_VDDIO2_IRQn = 1, /*!< PVD & VDDIO2 Interrupts through EXTI Lines 16 and 31 */
+ RTC_IRQn = 2, /*!< RTC Interrupt through EXTI Lines 17, 19 and 20 */
+ FLASH_IRQn = 3, /*!< FLASH global Interrupt */
+ RCC_CRS_IRQn = 4, /*!< RCC & CRS global Interrupts */
+ EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupts */
+ EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupts */
+ EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupts */
+ TSC_IRQn = 8, /*!< Touch Sensing Controller Interrupts */
+ DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */
+ DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupts */
+ DMA1_Channel4_5_6_7_IRQn = 11, /*!< DMA1 Channel 4 to Channel 7 Interrupts */
+ ADC1_COMP_IRQn = 12, /*!< ADC1 and COMP interrupts (ADC interrupt combined with EXTI Lines 21 and 22 */
+ TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupts */
+ TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 15, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 16, /*!< TIM3 global Interrupt */
+ TIM6_DAC_IRQn = 17, /*!< TIM6 global and DAC channel underrun error Interrupts */
+ TIM7_IRQn = 18, /*!< TIM7 global Interrupt */
+ TIM14_IRQn = 19, /*!< TIM14 global Interrupt */
+ TIM15_IRQn = 20, /*!< TIM15 global Interrupt */
+ TIM16_IRQn = 21, /*!< TIM16 global Interrupt */
+ TIM17_IRQn = 22, /*!< TIM17 global Interrupt */
+ I2C1_IRQn = 23, /*!< I2C1 Event Interrupt & EXTI Line23 Interrupt (I2C1 wakeup) */
+ I2C2_IRQn = 24, /*!< I2C2 Event Interrupt */
+ SPI1_IRQn = 25, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 26, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 27, /*!< USART1 global Interrupt & EXTI Line25 Interrupt (USART1 wakeup) */
+ USART2_IRQn = 28, /*!< USART2 global Interrupt & EXTI Line26 Interrupt (USART2 wakeup) */
+ USART3_4_IRQn = 29, /*!< USART3 and USART4 global Interrupts */
+ CEC_CAN_IRQn = 30 /*!< CEC and CAN global Interrupts & EXTI Line27 Interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm0.h" /* Cortex-M0 processor and core peripherals */
+#include "system_stm32f0xx.h" /* STM32F0xx System Header */
+#include <stdint.h>
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< ADC Interrupt and Status register, Address offset:0x00 */
+ __IO uint32_t IER; /*!< ADC Interrupt Enable register, Address offset:0x04 */
+ __IO uint32_t CR; /*!< ADC Control register, Address offset:0x08 */
+ __IO uint32_t CFGR1; /*!< ADC Configuration register 1, Address offset:0x0C */
+ __IO uint32_t CFGR2; /*!< ADC Configuration register 2, Address offset:0x10 */
+ __IO uint32_t SMPR; /*!< ADC Sampling time register, Address offset:0x14 */
+ uint32_t RESERVED1; /*!< Reserved, 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, 0x1C */
+ __IO uint32_t TR; /*!< ADC watchdog threshold register, Address offset:0x20 */
+ uint32_t RESERVED3; /*!< Reserved, 0x24 */
+ __IO uint32_t CHSELR; /*!< ADC channel selection register, Address offset:0x28 */
+ uint32_t RESERVED4[5]; /*!< Reserved, 0x2C */
+ __IO uint32_t DR; /*!< ADC data register, Address offset:0x40 */
+}ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CCR;
+}ADC_Common_TypeDef;
+
+/**
+ * @brief HDMI-CEC
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< CEC control register, Address offset:0x00 */
+ __IO uint32_t CFGR; /*!< CEC configuration register, Address offset:0x04 */
+ __IO uint32_t TXDR; /*!< CEC Tx data register , Address offset:0x08 */
+ __IO uint32_t RXDR; /*!< CEC Rx Data Register, Address offset:0x0C */
+ __IO uint32_t ISR; /*!< CEC Interrupt and Status Register, Address offset:0x10 */
+ __IO uint32_t IER; /*!< CEC interrupt enable register, Address offset:0x14 */
+}CEC_TypeDef;
+
+/**
+ * @brief Comparator
+ */
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< Comparator 1 & 2 control Status register, Address offset: 0x00 */
+}COMP1_2_TypeDef;
+
+typedef struct
+{
+ __IO uint16_t CSR; /*!< Comparator control Status register, Address offset: 0x00 */
+}COMP_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+ uint32_t RESERVED2; /*!< Reserved, 0x0C */
+ __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */
+ __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */
+}CRC_TypeDef;
+
+/**
+ * @brief Clock Recovery System
+ */
+typedef struct
+{
+__IO uint32_t CR; /*!< CRS ccontrol register, Address offset: 0x00 */
+__IO uint32_t CFGR; /*!< CRS configuration register, Address offset: 0x04 */
+__IO uint32_t ISR; /*!< CRS interrupt and status register, Address offset: 0x08 */
+__IO uint32_t ICR; /*!< CRS interrupt flag clear register, Address offset: 0x0C */
+}CRS_TypeDef;
+
+/**
+ * @brief Digital to Analog Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */
+ __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */
+ __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */
+ __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */
+ __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */
+ __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */
+ __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */
+ __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */
+ __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */
+ __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */
+ __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */
+ __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */
+ __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */
+ __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */
+}DAC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< DMA channel x configuration register */
+ __IO uint32_t CNDTR; /*!< DMA channel x number of data register */
+ __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */
+ __IO uint32_t CMAR; /*!< DMA channel x memory address register */
+}DMA_Channel_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */
+ __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */
+}DMA_TypeDef;
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!<EXTI Interrupt mask register, Address offset: 0x00 */
+ __IO uint32_t EMR; /*!<EXTI Event mask register, Address offset: 0x04 */
+ __IO uint32_t RTSR; /*!<EXTI Rising trigger selection register , Address offset: 0x08 */
+ __IO uint32_t FTSR; /*!<EXTI Falling trigger selection register, Address offset: 0x0C */
+ __IO uint32_t SWIER; /*!<EXTI Software interrupt event register, Address offset: 0x10 */
+ __IO uint32_t PR; /*!<EXTI Pending register, Address offset: 0x14 */
+}EXTI_TypeDef;
+
+/**
+ * @brief FLASH Registers
+ */
+typedef struct
+{
+ __IO uint32_t ACR; /*!<FLASH access control register, Address offset: 0x00 */
+ __IO uint32_t KEYR; /*!<FLASH key register, Address offset: 0x04 */
+ __IO uint32_t OPTKEYR; /*!<FLASH OPT key register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!<FLASH status register, Address offset: 0x0C */
+ __IO uint32_t CR; /*!<FLASH control register, Address offset: 0x10 */
+ __IO uint32_t AR; /*!<FLASH address register, Address offset: 0x14 */
+ __IO uint32_t RESERVED; /*!< Reserved, 0x18 */
+ __IO uint32_t OBR; /*!<FLASH option bytes register, Address offset: 0x1C */
+ __IO uint32_t WRPR; /*!<FLASH option bytes register, Address offset: 0x20 */
+}FLASH_TypeDef;
+
+
+/**
+ * @brief Option Bytes Registers
+ */
+typedef struct
+{
+ __IO uint16_t RDP; /*!< FLASH option byte Read protection, Address offset: 0x00 */
+ __IO uint16_t USER; /*!< FLASH option byte user options, Address offset: 0x02 */
+ __IO uint16_t DATA0; /*!< User data byte 0 (stored in FLASH_OBR[23:16]), Address offset: 0x04 */
+ __IO uint16_t DATA1; /*!< User data byte 1 (stored in FLASH_OBR[31:24]), Address offset: 0x06 */
+ __IO uint16_t WRP0; /*!< FLASH option byte write protection 0, Address offset: 0x08 */
+ __IO uint16_t WRP1; /*!< FLASH option byte write protection 1, Address offset: 0x0A */
+ __IO uint16_t WRP2; /*!< FLASH option byte write protection 2, Address offset: 0x0C */
+ __IO uint16_t WRP3; /*!< FLASH option byte write protection 3, Address offset: 0x0E */
+}OB_TypeDef;
+
+/**
+ * @brief General Purpose I/O
+ */
+
+typedef struct
+{
+ __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */
+ __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */
+ __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */
+ __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */
+ __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */
+ __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */
+ __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x1A */
+ __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */
+ __IO uint32_t AFR[2]; /*!< GPIO alternate function low register, Address offset: 0x20-0x24 */
+ __IO uint32_t BRR; /*!< GPIO bit reset register, Address offset: 0x28 */
+}GPIO_TypeDef;
+
+/**
+ * @brief SysTem Configuration
+ */
+
+typedef struct
+{
+ __IO uint32_t CFGR1; /*!< SYSCFG configuration register 1, Address offset: 0x00 */
+ uint32_t RESERVED; /*!< Reserved, 0x04 */
+ __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration register, Address offset: 0x14-0x08 */
+ __IO uint32_t CFGR2; /*!< SYSCFG configuration register 2, Address offset: 0x18 */
+}SYSCFG_TypeDef;
+
+/**
+ * @brief Inter-integrated Circuit Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */
+ __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */
+ __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */
+ __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */
+ __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */
+ __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */
+ __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */
+ __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */
+ __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */
+ __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */
+}I2C_TypeDef;
+
+/**
+ * @brief Independent WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */
+ __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */
+ __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */
+ __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */
+}IWDG_TypeDef;
+
+/**
+ * @brief Power Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< PWR power control register, Address offset: 0x00 */
+ __IO uint32_t CSR; /*!< PWR power control/status register, Address offset: 0x04 */
+}PWR_TypeDef;
+
+/**
+ * @brief Reset and Clock Control
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */
+ __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x04 */
+ __IO uint32_t CIR; /*!< RCC clock interrupt register, Address offset: 0x08 */
+ __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x0C */
+ __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x10 */
+ __IO uint32_t AHBENR; /*!< RCC AHB peripheral clock register, Address offset: 0x14 */
+ __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x18 */
+ __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x1C */
+ __IO uint32_t BDCR; /*!< RCC Backup domain control register, Address offset: 0x20 */
+ __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x24 */
+ __IO uint32_t AHBRSTR; /*!< RCC AHB peripheral reset register, Address offset: 0x28 */
+ __IO uint32_t CFGR2; /*!< RCC clock configuration register 2, Address offset: 0x2C */
+ __IO uint32_t CFGR3; /*!< RCC clock configuration register 3, Address offset: 0x30 */
+ __IO uint32_t CR2; /*!< RCC clock control register 2, Address offset: 0x34 */
+}RCC_TypeDef;
+
+/**
+ * @brief Real-Time Clock
+ */
+
+typedef struct
+{
+ __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */
+ __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */
+ __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */
+ uint32_t RESERVED1; /*!< Reserved, Address offset: 0x18 */
+ __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */
+ uint32_t RESERVED2; /*!< Reserved, Address offset: 0x20 */
+ __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */
+ __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */
+ __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */
+ __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */
+ __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */
+ __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */
+ __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */
+ __IO uint32_t TAFCR; /*!< RTC tamper and alternate function configuration register, Address offset: 0x40 */
+ __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */
+ uint32_t RESERVED3; /*!< Reserved, Address offset: 0x48 */
+ uint32_t RESERVED4; /*!< Reserved, Address offset: 0x4C */
+ __IO uint32_t BKP0R; /*!< RTC backup register 0, Address offset: 0x50 */
+ __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */
+ __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */
+ __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */
+ __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */
+}RTC_TypeDef;
+
+/**
+ * @brief Serial Peripheral Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< SPI Control register 1 (not used in I2S mode), Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */
+ __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */
+ __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */
+ __IO uint32_t RXCRCR; /*!< SPI Rx CRC register (not used in I2S mode), Address offset: 0x14 */
+ __IO uint32_t TXCRCR; /*!< SPI Tx CRC register (not used in I2S mode), Address offset: 0x18 */
+ __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */
+ __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */
+}SPI_TypeDef;
+
+/**
+ * @brief TIM
+ */
+typedef struct
+{
+ __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */
+ __IO uint32_t SMCR; /*!< TIM slave Mode Control register, Address offset: 0x08 */
+ __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */
+ __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */
+ __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */
+ __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */
+ __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */
+ __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */
+ __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */
+ __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */
+ __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */
+ __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */
+ __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */
+ __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */
+ __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */
+ __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */
+ __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */
+ __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */
+ __IO uint32_t DMAR; /*!< TIM DMA address for full transfer register, Address offset: 0x4C */
+ __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */
+}TIM_TypeDef;
+
+/**
+ * @brief Touch Sensing Controller (TSC)
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< TSC control register, Address offset: 0x00 */
+ __IO uint32_t IER; /*!< TSC interrupt enable register, Address offset: 0x04 */
+ __IO uint32_t ICR; /*!< TSC interrupt clear register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< TSC interrupt status register, Address offset: 0x0C */
+ __IO uint32_t IOHCR; /*!< TSC I/O hysteresis control register, Address offset: 0x10 */
+ uint32_t RESERVED1; /*!< Reserved, Address offset: 0x14 */
+ __IO uint32_t IOASCR; /*!< TSC I/O analog switch control register, Address offset: 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, Address offset: 0x1C */
+ __IO uint32_t IOSCR; /*!< TSC I/O sampling control register, Address offset: 0x20 */
+ uint32_t RESERVED3; /*!< Reserved, Address offset: 0x24 */
+ __IO uint32_t IOCCR; /*!< TSC I/O channel control register, Address offset: 0x28 */
+ uint32_t RESERVED4; /*!< Reserved, Address offset: 0x2C */
+ __IO uint32_t IOGCSR; /*!< TSC I/O group control status register, Address offset: 0x30 */
+ __IO uint32_t IOGXCR[8]; /*!< TSC I/O group x counter register, Address offset: 0x34-50 */
+}TSC_TypeDef;
+
+/**
+ * @brief Universal Synchronous Asynchronous Receiver Transmitter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */
+ __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */
+ __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */
+ __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */
+ __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */
+ __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */
+ __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */
+ __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */
+ __IO uint16_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */
+ uint16_t RESERVED1; /*!< Reserved, 0x26 */
+ __IO uint16_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */
+ uint16_t RESERVED2; /*!< Reserved, 0x2A */
+}USART_TypeDef;
+
+/**
+ * @brief Window WATCHDOG
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */
+ __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */
+}WWDG_TypeDef;
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_memory_map
+ * @{
+ */
+
+#define FLASH_BASE ((uint32_t)0x08000000) /*!< FLASH base address in the alias region */
+#define SRAM_BASE ((uint32_t)0x20000000) /*!< SRAM base address in the alias region */
+#define PERIPH_BASE ((uint32_t)0x40000000) /*!< Peripheral base address in the alias region */
+
+/*!< Peripheral memory map */
+#define APBPERIPH_BASE PERIPH_BASE
+#define AHBPERIPH_BASE (PERIPH_BASE + 0x00020000)
+#define AHB2PERIPH_BASE (PERIPH_BASE + 0x08000000)
+
+#define TIM2_BASE (APBPERIPH_BASE + 0x00000000)
+#define TIM3_BASE (APBPERIPH_BASE + 0x00000400)
+#define TIM6_BASE (APBPERIPH_BASE + 0x00001000)
+#define TIM7_BASE (APBPERIPH_BASE + 0x00001400)
+#define TIM14_BASE (APBPERIPH_BASE + 0x00002000)
+#define RTC_BASE (APBPERIPH_BASE + 0x00002800)
+#define WWDG_BASE (APBPERIPH_BASE + 0x00002C00)
+#define IWDG_BASE (APBPERIPH_BASE + 0x00003000)
+#define SPI2_BASE (APBPERIPH_BASE + 0x00003800)
+#define USART2_BASE (APBPERIPH_BASE + 0x00004400)
+#define USART3_BASE (APBPERIPH_BASE + 0x00004800)
+#define USART4_BASE (APBPERIPH_BASE + 0x00004C00)
+#define I2C1_BASE (APBPERIPH_BASE + 0x00005400)
+#define I2C2_BASE (APBPERIPH_BASE + 0x00005800)
+#define CRS_BASE (APBPERIPH_BASE + 0x00006C00)
+#define PWR_BASE (APBPERIPH_BASE + 0x00007000)
+#define DAC_BASE (APBPERIPH_BASE + 0x00007400)
+#define CEC_BASE (APBPERIPH_BASE + 0x00007800)
+
+#define SYSCFG_BASE (APBPERIPH_BASE + 0x00010000)
+#define COMP_BASE (APBPERIPH_BASE + 0x0001001C)
+#define EXTI_BASE (APBPERIPH_BASE + 0x00010400)
+#define ADC1_BASE (APBPERIPH_BASE + 0x00012400)
+#define ADC_BASE (APBPERIPH_BASE + 0x00012708)
+#define TIM1_BASE (APBPERIPH_BASE + 0x00012C00)
+#define SPI1_BASE (APBPERIPH_BASE + 0x00013000)
+#define USART1_BASE (APBPERIPH_BASE + 0x00013800)
+#define TIM15_BASE (APBPERIPH_BASE + 0x00014000)
+#define TIM16_BASE (APBPERIPH_BASE + 0x00014400)
+#define TIM17_BASE (APBPERIPH_BASE + 0x00014800)
+#define DBGMCU_BASE (APBPERIPH_BASE + 0x00015800)
+
+#define DMA1_BASE (AHBPERIPH_BASE + 0x00000000)
+#define DMA1_Channel1_BASE (DMA1_BASE + 0x00000008)
+#define DMA1_Channel2_BASE (DMA1_BASE + 0x0000001C)
+#define DMA1_Channel3_BASE (DMA1_BASE + 0x00000030)
+#define DMA1_Channel4_BASE (DMA1_BASE + 0x00000044)
+#define DMA1_Channel5_BASE (DMA1_BASE + 0x00000058)
+#define DMA1_Channel6_BASE (DMA1_BASE + 0x0000006C)
+#define DMA1_Channel7_BASE (DMA1_BASE + 0x00000080)
+
+#define RCC_BASE (AHBPERIPH_BASE + 0x00001000)
+#define FLASH_R_BASE (AHBPERIPH_BASE + 0x00002000) /*!< FLASH registers base address */
+#define OB_BASE ((uint32_t)0x1FFFF800) /*!< FLASH Option Bytes base address */
+#define CRC_BASE (AHBPERIPH_BASE + 0x00003000)
+#define TSC_BASE (AHBPERIPH_BASE + 0x00004000)
+
+#define GPIOA_BASE (AHB2PERIPH_BASE + 0x00000000)
+#define GPIOB_BASE (AHB2PERIPH_BASE + 0x00000400)
+#define GPIOC_BASE (AHB2PERIPH_BASE + 0x00000800)
+#define GPIOD_BASE (AHB2PERIPH_BASE + 0x00000C00)
+#define GPIOE_BASE (AHB2PERIPH_BASE + 0x00001000)
+#define GPIOF_BASE (AHB2PERIPH_BASE + 0x00001400)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_declaration
+ * @{
+ */
+
+#define TIM2 ((TIM_TypeDef *) TIM2_BASE)
+#define TIM3 ((TIM_TypeDef *) TIM3_BASE)
+#define TIM6 ((TIM_TypeDef *) TIM6_BASE)
+#define TIM7 ((TIM_TypeDef *) TIM7_BASE)
+#define TIM14 ((TIM_TypeDef *) TIM14_BASE)
+#define RTC ((RTC_TypeDef *) RTC_BASE)
+#define WWDG ((WWDG_TypeDef *) WWDG_BASE)
+#define IWDG ((IWDG_TypeDef *) IWDG_BASE)
+#define SPI2 ((SPI_TypeDef *) SPI2_BASE)
+#define USART2 ((USART_TypeDef *) USART2_BASE)
+#define USART3 ((USART_TypeDef *) USART3_BASE)
+#define USART4 ((USART_TypeDef *) USART4_BASE)
+#define I2C1 ((I2C_TypeDef *) I2C1_BASE)
+#define I2C2 ((I2C_TypeDef *) I2C2_BASE)
+#define CRS ((CRS_TypeDef *) CRS_BASE)
+#define PWR ((PWR_TypeDef *) PWR_BASE)
+#define DAC ((DAC_TypeDef *) DAC_BASE)
+#define CEC ((CEC_TypeDef *) CEC_BASE)
+#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE)
+#define COMP ((COMP1_2_TypeDef *) COMP_BASE)
+#define COMP1 ((COMP_TypeDef *) COMP_BASE)
+#define COMP2 ((COMP_TypeDef *) (COMP_BASE + 0x00000002))
+#define EXTI ((EXTI_TypeDef *) EXTI_BASE)
+#define ADC1 ((ADC_TypeDef *) ADC1_BASE)
+#define ADC ((ADC_Common_TypeDef *) ADC_BASE)
+#define TIM1 ((TIM_TypeDef *) TIM1_BASE)
+#define SPI1 ((SPI_TypeDef *) SPI1_BASE)
+#define USART1 ((USART_TypeDef *) USART1_BASE)
+#define TIM15 ((TIM_TypeDef *) TIM15_BASE)
+#define TIM16 ((TIM_TypeDef *) TIM16_BASE)
+#define TIM17 ((TIM_TypeDef *) TIM17_BASE)
+#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE)
+#define DMA1 ((DMA_TypeDef *) DMA1_BASE)
+#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE)
+#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE)
+#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE)
+#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE)
+#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE)
+#define DMA1_Channel6 ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE)
+#define DMA1_Channel7 ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE)
+#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE)
+#define OB ((OB_TypeDef *) OB_BASE)
+#define RCC ((RCC_TypeDef *) RCC_BASE)
+#define CRC ((CRC_TypeDef *) CRC_BASE)
+#define TSC ((TSC_TypeDef *) TSC_BASE)
+#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE)
+#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE)
+#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE)
+#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE)
+#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE)
+#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_constants
+ * @{
+ */
+
+ /** @addtogroup Peripheral_Registers_Bits_Definition
+ * @{
+ */
+
+/******************************************************************************/
+/* Peripheral Registers Bits Definition */
+/******************************************************************************/
+/******************************************************************************/
+/* */
+/* Analog to Digital Converter (ADC) */
+/* */
+/******************************************************************************/
+/******************** Bits definition for ADC_ISR register ******************/
+#define ADC_ISR_AWD ((uint32_t)0x00000080) /*!< Analog watchdog flag */
+#define ADC_ISR_OVR ((uint32_t)0x00000010) /*!< Overrun flag */
+#define ADC_ISR_EOSEQ ((uint32_t)0x00000008) /*!< End of Sequence flag */
+#define ADC_ISR_EOC ((uint32_t)0x00000004) /*!< End of Conversion */
+#define ADC_ISR_EOSMP ((uint32_t)0x00000002) /*!< End of sampling flag */
+#define ADC_ISR_ADRDY ((uint32_t)0x00000001) /*!< ADC Ready */
+
+/* Old EOSEQ bit definition, maintained for legacy purpose */
+#define ADC_ISR_EOS ADC_ISR_EOSEQ
+
+/******************** Bits definition for ADC_IER register ******************/
+#define ADC_IER_AWDIE ((uint32_t)0x00000080) /*!< Analog Watchdog interrupt enable */
+#define ADC_IER_OVRIE ((uint32_t)0x00000010) /*!< Overrun interrupt enable */
+#define ADC_IER_EOSEQIE ((uint32_t)0x00000008) /*!< End of Sequence of conversion interrupt enable */
+#define ADC_IER_EOCIE ((uint32_t)0x00000004) /*!< End of Conversion interrupt enable */
+#define ADC_IER_EOSMPIE ((uint32_t)0x00000002) /*!< End of sampling interrupt enable */
+#define ADC_IER_ADRDYIE ((uint32_t)0x00000001) /*!< ADC Ready interrupt enable */
+
+/* Old EOSEQIE bit definition, maintained for legacy purpose */
+#define ADC_IER_EOSIE ADC_IER_EOSEQIE
+
+/******************** Bits definition for ADC_CR register *******************/
+#define ADC_CR_ADCAL ((uint32_t)0x80000000) /*!< ADC calibration */
+#define ADC_CR_ADSTP ((uint32_t)0x00000010) /*!< ADC stop of conversion command */
+#define ADC_CR_ADSTART ((uint32_t)0x00000004) /*!< ADC start of conversion */
+#define ADC_CR_ADDIS ((uint32_t)0x00000002) /*!< ADC disable command */
+#define ADC_CR_ADEN ((uint32_t)0x00000001) /*!< ADC enable control */
+
+/******************* Bits definition for ADC_CFGR1 register *****************/
+#define ADC_CFGR1_AWDCH ((uint32_t)0x7C000000) /*!< AWDCH[4:0] bits (Analog watchdog channel select bits) */
+#define ADC_CFGR1_AWDCH_0 ((uint32_t)0x04000000) /*!< Bit 0 */
+#define ADC_CFGR1_AWDCH_1 ((uint32_t)0x08000000) /*!< Bit 1 */
+#define ADC_CFGR1_AWDCH_2 ((uint32_t)0x10000000) /*!< Bit 2 */
+#define ADC_CFGR1_AWDCH_3 ((uint32_t)0x20000000) /*!< Bit 3 */
+#define ADC_CFGR1_AWDCH_4 ((uint32_t)0x40000000) /*!< Bit 4 */
+#define ADC_CFGR1_AWDEN ((uint32_t)0x00800000) /*!< Analog watchdog enable on regular channels */
+#define ADC_CFGR1_AWDSGL ((uint32_t)0x00400000) /*!< Enable the watchdog on a single channel or on all channels */
+#define ADC_CFGR1_DISCEN ((uint32_t)0x00010000) /*!< Discontinuous mode on regular channels */
+#define ADC_CFGR1_AUTOFF ((uint32_t)0x00008000) /*!< ADC auto power off */
+#define ADC_CFGR1_WAIT ((uint32_t)0x00004000) /*!< ADC wait conversion mode */
+#define ADC_CFGR1_CONT ((uint32_t)0x00002000) /*!< Continuous Conversion */
+#define ADC_CFGR1_OVRMOD ((uint32_t)0x00001000) /*!< Overrun mode */
+#define ADC_CFGR1_EXTEN ((uint32_t)0x00000C00) /*!< EXTEN[1:0] bits (External Trigger Conversion mode for regular channels) */
+#define ADC_CFGR1_EXTEN_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define ADC_CFGR1_EXTEN_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define ADC_CFGR1_EXTSEL ((uint32_t)0x000001C0) /*!< EXTSEL[2:0] bits (External Event Select for regular group) */
+#define ADC_CFGR1_EXTSEL_0 ((uint32_t)0x00000040) /*!< Bit 0 */
+#define ADC_CFGR1_EXTSEL_1 ((uint32_t)0x00000080) /*!< Bit 1 */
+#define ADC_CFGR1_EXTSEL_2 ((uint32_t)0x00000100) /*!< Bit 2 */
+#define ADC_CFGR1_ALIGN ((uint32_t)0x00000020) /*!< Data Alignment */
+#define ADC_CFGR1_RES ((uint32_t)0x00000018) /*!< RES[1:0] bits (Resolution) */
+#define ADC_CFGR1_RES_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define ADC_CFGR1_RES_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define ADC_CFGR1_SCANDIR ((uint32_t)0x00000004) /*!< Sequence scan direction */
+#define ADC_CFGR1_DMACFG ((uint32_t)0x00000002) /*!< Direct memory access configuration */
+#define ADC_CFGR1_DMAEN ((uint32_t)0x00000001) /*!< Direct memory access enable */
+
+/* Old WAIT bit definition, maintained for legacy purpose */
+#define ADC_CFGR1_AUTDLY ADC_CFGR1_WAIT
+
+/******************* Bits definition for ADC_CFGR2 register *****************/
+#define ADC_CFGR2_CKMODE ((uint32_t)0xC0000000) /*!< ADC clock mode */
+#define ADC_CFGR2_CKMODE_1 ((uint32_t)0x80000000) /*!< ADC clocked by PCLK div4 */
+#define ADC_CFGR2_CKMODE_0 ((uint32_t)0x40000000) /*!< ADC clocked by PCLK div2 */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_CFGR2_JITOFFDIV4 ADC_CFGR2_CKMODE_1 /*!< ADC clocked by PCLK div4 */
+#define ADC_CFGR2_JITOFFDIV2 ADC_CFGR2_CKMODE_0 /*!< ADC clocked by PCLK div2 */
+
+/****************** Bit definition for ADC_SMPR register ********************/
+#define ADC_SMPR_SMP ((uint32_t)0x00000007) /*!< SMP[2:0] bits (Sampling time selection) */
+#define ADC_SMPR_SMP_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define ADC_SMPR_SMP_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define ADC_SMPR_SMP_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_SMPR1_SMPR ADC_SMPR_SMP /*!< SMP[2:0] bits (Sampling time selection) */
+#define ADC_SMPR1_SMPR_0 ADC_SMPR_SMP_0 /*!< Bit 0 */
+#define ADC_SMPR1_SMPR_1 ADC_SMPR_SMP_1 /*!< Bit 1 */
+#define ADC_SMPR1_SMPR_2 ADC_SMPR_SMP_2 /*!< Bit 2 */
+
+/******************* Bit definition for ADC_TR register ********************/
+#define ADC_TR_HT ((uint32_t)0x0FFF0000) /*!< Analog watchdog high threshold */
+#define ADC_TR_LT ((uint32_t)0x00000FFF) /*!< Analog watchdog low threshold */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_HTR_HT ADC_TR_HT /*!< Analog watchdog high threshold */
+#define ADC_LTR_LT ADC_TR_LT /*!< Analog watchdog low threshold */
+
+/****************** Bit definition for ADC_CHSELR register ******************/
+#define ADC_CHSELR_CHSEL18 ((uint32_t)0x00040000) /*!< Channel 18 selection */
+#define ADC_CHSELR_CHSEL17 ((uint32_t)0x00020000) /*!< Channel 17 selection */
+#define ADC_CHSELR_CHSEL16 ((uint32_t)0x00010000) /*!< Channel 16 selection */
+#define ADC_CHSELR_CHSEL15 ((uint32_t)0x00008000) /*!< Channel 15 selection */
+#define ADC_CHSELR_CHSEL14 ((uint32_t)0x00004000) /*!< Channel 14 selection */
+#define ADC_CHSELR_CHSEL13 ((uint32_t)0x00002000) /*!< Channel 13 selection */
+#define ADC_CHSELR_CHSEL12 ((uint32_t)0x00001000) /*!< Channel 12 selection */
+#define ADC_CHSELR_CHSEL11 ((uint32_t)0x00000800) /*!< Channel 11 selection */
+#define ADC_CHSELR_CHSEL10 ((uint32_t)0x00000400) /*!< Channel 10 selection */
+#define ADC_CHSELR_CHSEL9 ((uint32_t)0x00000200) /*!< Channel 9 selection */
+#define ADC_CHSELR_CHSEL8 ((uint32_t)0x00000100) /*!< Channel 8 selection */
+#define ADC_CHSELR_CHSEL7 ((uint32_t)0x00000080) /*!< Channel 7 selection */
+#define ADC_CHSELR_CHSEL6 ((uint32_t)0x00000040) /*!< Channel 6 selection */
+#define ADC_CHSELR_CHSEL5 ((uint32_t)0x00000020) /*!< Channel 5 selection */
+#define ADC_CHSELR_CHSEL4 ((uint32_t)0x00000010) /*!< Channel 4 selection */
+#define ADC_CHSELR_CHSEL3 ((uint32_t)0x00000008) /*!< Channel 3 selection */
+#define ADC_CHSELR_CHSEL2 ((uint32_t)0x00000004) /*!< Channel 2 selection */
+#define ADC_CHSELR_CHSEL1 ((uint32_t)0x00000002) /*!< Channel 1 selection */
+#define ADC_CHSELR_CHSEL0 ((uint32_t)0x00000001) /*!< Channel 0 selection */
+
+/******************** Bit definition for ADC_DR register ********************/
+#define ADC_DR_DATA ((uint32_t)0x0000FFFF) /*!< Regular data */
+
+/******************* Bit definition for ADC_CCR register ********************/
+#define ADC_CCR_VBATEN ((uint32_t)0x01000000) /*!< Voltage battery enable */
+#define ADC_CCR_TSEN ((uint32_t)0x00800000) /*!< Tempurature sensore enable */
+#define ADC_CCR_VREFEN ((uint32_t)0x00400000) /*!< Vrefint enable */
+
+/******************************************************************************/
+/* */
+/* HDMI-CEC (CEC) */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for CEC_CR register *********************/
+#define CEC_CR_CECEN ((uint32_t)0x00000001) /*!< CEC Enable */
+#define CEC_CR_TXSOM ((uint32_t)0x00000002) /*!< CEC Tx Start Of Message */
+#define CEC_CR_TXEOM ((uint32_t)0x00000004) /*!< CEC Tx End Of Message */
+
+/******************* Bit definition for CEC_CFGR register *******************/
+#define CEC_CFGR_SFT ((uint32_t)0x00000007) /*!< CEC Signal Free Time */
+#define CEC_CFGR_RXTOL ((uint32_t)0x00000008) /*!< CEC Tolerance */
+#define CEC_CFGR_BRESTP ((uint32_t)0x00000010) /*!< CEC Rx Stop */
+#define CEC_CFGR_BREGEN ((uint32_t)0x00000020) /*!< CEC Bit Rising Error generation */
+#define CEC_CFGR_LBPEGEN ((uint32_t)0x00000040) /*!< CEC Long Bit Period Error gener. */
+#define CEC_CFGR_BRDNOGEN ((uint32_t)0x00000080) /*!< CEC Broadcast No Error generation */
+#define CEC_CFGR_SFTOPT ((uint32_t)0x00000100) /*!< CEC Signal Free Time optional */
+#define CEC_CFGR_OAR ((uint32_t)0x7FFF0000) /*!< CEC Own Address */
+#define CEC_CFGR_LSTN ((uint32_t)0x80000000) /*!< CEC Listen mode */
+
+/******************* Bit definition for CEC_TXDR register *******************/
+#define CEC_TXDR_TXD ((uint32_t)0x000000FF) /*!< CEC Tx Data */
+
+/******************* Bit definition for CEC_RXDR register *******************/
+#define CEC_TXDR_RXD ((uint32_t)0x000000FF) /*!< CEC Rx Data */
+
+/******************* Bit definition for CEC_ISR register ********************/
+#define CEC_ISR_RXBR ((uint32_t)0x00000001) /*!< CEC Rx-Byte Received */
+#define CEC_ISR_RXEND ((uint32_t)0x00000002) /*!< CEC End Of Reception */
+#define CEC_ISR_RXOVR ((uint32_t)0x00000004) /*!< CEC Rx-Overrun */
+#define CEC_ISR_BRE ((uint32_t)0x00000008) /*!< CEC Rx Bit Rising Error */
+#define CEC_ISR_SBPE ((uint32_t)0x00000010) /*!< CEC Rx Short Bit period Error */
+#define CEC_ISR_LBPE ((uint32_t)0x00000020) /*!< CEC Rx Long Bit period Error */
+#define CEC_ISR_RXACKE ((uint32_t)0x00000040) /*!< CEC Rx Missing Acknowledge */
+#define CEC_ISR_ARBLST ((uint32_t)0x00000080) /*!< CEC Arbitration Lost */
+#define CEC_ISR_TXBR ((uint32_t)0x00000100) /*!< CEC Tx Byte Request */
+#define CEC_ISR_TXEND ((uint32_t)0x00000200) /*!< CEC End of Transmission */
+#define CEC_ISR_TXUDR ((uint32_t)0x00000400) /*!< CEC Tx-Buffer Underrun */
+#define CEC_ISR_TXERR ((uint32_t)0x00000800) /*!< CEC Tx-Error */
+#define CEC_ISR_TXACKE ((uint32_t)0x00001000) /*!< CEC Tx Missing Acknowledge */
+
+/******************* Bit definition for CEC_IER register ********************/
+#define CEC_IER_RXBRIE ((uint32_t)0x00000001) /*!< CEC Rx-Byte Received IT Enable */
+#define CEC_IER_RXENDIE ((uint32_t)0x00000002) /*!< CEC End Of Reception IT Enable */
+#define CEC_IER_RXOVRIE ((uint32_t)0x00000004) /*!< CEC Rx-Overrun IT Enable */
+#define CEC_IER_BREIE ((uint32_t)0x00000008) /*!< CEC Rx Bit Rising Error IT Enable */
+#define CEC_IER_SBPEIE ((uint32_t)0x00000010) /*!< CEC Rx Short Bit period Error IT Enable*/
+#define CEC_IER_LBPEIE ((uint32_t)0x00000020) /*!< CEC Rx Long Bit period Error IT Enable */
+#define CEC_IER_RXACKEIE ((uint32_t)0x00000040) /*!< CEC Rx Missing Acknowledge IT Enable */
+#define CEC_IER_ARBLSTIE ((uint32_t)0x00000080) /*!< CEC Arbitration Lost IT Enable */
+#define CEC_IER_TXBRIE ((uint32_t)0x00000100) /*!< CEC Tx Byte Request IT Enable */
+#define CEC_IER_TXENDIE ((uint32_t)0x00000200) /*!< CEC End of Transmission IT Enable */
+#define CEC_IER_TXUDRIE ((uint32_t)0x00000400) /*!< CEC Tx-Buffer Underrun IT Enable */
+#define CEC_IER_TXERRIE ((uint32_t)0x00000800) /*!< CEC Tx-Error IT Enable */
+#define CEC_IER_TXACKEIE ((uint32_t)0x00001000) /*!< CEC Tx Missing Acknowledge IT Enable */
+
+
+/******************************************************************************/
+/* */
+/* Analog Comparators (COMP) */
+/* */
+/******************************************************************************/
+/*********************** Bit definition for COMP_CSR register ***************/
+/* COMP1 bits definition */
+#define COMP_CSR_COMP1EN ((uint32_t)0x00000001) /*!< COMP1 enable */
+#define COMP_CSR_COMP1SW1 ((uint32_t)0x00000002) /*!< SW1 switch control */
+#define COMP_CSR_COMP1MODE ((uint32_t)0x0000000C) /*!< COMP1 power mode */
+#define COMP_CSR_COMP1MODE_0 ((uint32_t)0x00000004) /*!< COMP1 power mode bit 0 */
+#define COMP_CSR_COMP1MODE_1 ((uint32_t)0x00000008) /*!< COMP1 power mode bit 1 */
+#define COMP_CSR_COMP1INSEL ((uint32_t)0x00000070) /*!< COMP1 inverting input select */
+#define COMP_CSR_COMP1INSEL_0 ((uint32_t)0x00000010) /*!< COMP1 inverting input select bit 0 */
+#define COMP_CSR_COMP1INSEL_1 ((uint32_t)0x00000020) /*!< COMP1 inverting input select bit 1 */
+#define COMP_CSR_COMP1INSEL_2 ((uint32_t)0x00000040) /*!< COMP1 inverting input select bit 2 */
+#define COMP_CSR_COMP1OUTSEL ((uint32_t)0x00000700) /*!< COMP1 output select */
+#define COMP_CSR_COMP1OUTSEL_0 ((uint32_t)0x00000100) /*!< COMP1 output select bit 0 */
+#define COMP_CSR_COMP1OUTSEL_1 ((uint32_t)0x00000200) /*!< COMP1 output select bit 1 */
+#define COMP_CSR_COMP1OUTSEL_2 ((uint32_t)0x00000400) /*!< COMP1 output select bit 2 */
+#define COMP_CSR_COMP1POL ((uint32_t)0x00000800) /*!< COMP1 output polarity */
+#define COMP_CSR_COMP1HYST ((uint32_t)0x00003000) /*!< COMP1 hysteresis */
+#define COMP_CSR_COMP1HYST_0 ((uint32_t)0x00001000) /*!< COMP1 hysteresis bit 0 */
+#define COMP_CSR_COMP1HYST_1 ((uint32_t)0x00002000) /*!< COMP1 hysteresis bit 1 */
+#define COMP_CSR_COMP1OUT ((uint32_t)0x00004000) /*!< COMP1 output level */
+#define COMP_CSR_COMP1LOCK ((uint32_t)0x00008000) /*!< COMP1 lock */
+/* COMP2 bits definition */
+#define COMP_CSR_COMP2EN ((uint32_t)0x00010000) /*!< COMP2 enable */
+#define COMP_CSR_COMP2MODE ((uint32_t)0x000C0000) /*!< COMP2 power mode */
+#define COMP_CSR_COMP2MODE_0 ((uint32_t)0x00040000) /*!< COMP2 power mode bit 0 */
+#define COMP_CSR_COMP2MODE_1 ((uint32_t)0x00080000) /*!< COMP2 power mode bit 1 */
+#define COMP_CSR_COMP2INSEL ((uint32_t)0x00700000) /*!< COMP2 inverting input select */
+#define COMP_CSR_COMP2INSEL_0 ((uint32_t)0x00100000) /*!< COMP2 inverting input select bit 0 */
+#define COMP_CSR_COMP2INSEL_1 ((uint32_t)0x00200000) /*!< COMP2 inverting input select bit 1 */
+#define COMP_CSR_COMP2INSEL_2 ((uint32_t)0x00400000) /*!< COMP2 inverting input select bit 2 */
+#define COMP_CSR_WNDWEN ((uint32_t)0x00800000) /*!< Comparators window mode enable */
+#define COMP_CSR_COMP2OUTSEL ((uint32_t)0x07000000) /*!< COMP2 output select */
+#define COMP_CSR_COMP2OUTSEL_0 ((uint32_t)0x01000000) /*!< COMP2 output select bit 0 */
+#define COMP_CSR_COMP2OUTSEL_1 ((uint32_t)0x02000000) /*!< COMP2 output select bit 1 */
+#define COMP_CSR_COMP2OUTSEL_2 ((uint32_t)0x04000000) /*!< COMP2 output select bit 2 */
+#define COMP_CSR_COMP2POL ((uint32_t)0x08000000) /*!< COMP2 output polarity */
+#define COMP_CSR_COMP2HYST ((uint32_t)0x30000000) /*!< COMP2 hysteresis */
+#define COMP_CSR_COMP2HYST_0 ((uint32_t)0x10000000) /*!< COMP2 hysteresis bit 0 */
+#define COMP_CSR_COMP2HYST_1 ((uint32_t)0x20000000) /*!< COMP2 hysteresis bit 1 */
+#define COMP_CSR_COMP2OUT ((uint32_t)0x40000000) /*!< COMP2 output level */
+#define COMP_CSR_COMP2LOCK ((uint32_t)0x80000000) /*!< COMP2 lock */
+/* COMPx bits definition */
+#define COMP_CSR_COMPxEN ((uint16_t)0x0001) /*!< COMPx enable */
+#define COMP_CSR_COMPxMODE ((uint16_t)0x000C) /*!< COMPx power mode */
+#define COMP_CSR_COMPxMODE_0 ((uint16_t)0x0004) /*!< COMPx power mode bit 0 */
+#define COMP_CSR_COMPxMODE_1 ((uint16_t)0x0008) /*!< COMPx power mode bit 1 */
+#define COMP_CSR_COMPxINSEL ((uint16_t)0x0070) /*!< COMPx inverting input select */
+#define COMP_CSR_COMPxINSEL_0 ((uint16_t)0x0010) /*!< COMPx inverting input select bit 0 */
+#define COMP_CSR_COMPxINSEL_1 ((uint16_t)0x0020) /*!< COMPx inverting input select bit 1 */
+#define COMP_CSR_COMPxINSEL_2 ((uint16_t)0x0040) /*!< COMPx inverting input select bit 2 */
+#define COMP_CSR_COMPxOUTSEL ((uint16_t)0x0700) /*!< COMPx output select */
+#define COMP_CSR_COMPxOUTSEL_0 ((uint16_t)0x0100) /*!< COMPx output select bit 0 */
+#define COMP_CSR_COMPxOUTSEL_1 ((uint16_t)0x0200) /*!< COMPx output select bit 1 */
+#define COMP_CSR_COMPxOUTSEL_2 ((uint16_t)0x0400) /*!< COMPx output select bit 2 */
+#define COMP_CSR_COMPxPOL ((uint16_t)0x0800) /*!< COMPx output polarity */
+#define COMP_CSR_COMPxHYST ((uint16_t)0x3000) /*!< COMPx hysteresis */
+#define COMP_CSR_COMPxHYST_0 ((uint16_t)0x1000) /*!< COMPx hysteresis bit 0 */
+#define COMP_CSR_COMPxHYST_1 ((uint16_t)0x2000) /*!< COMPx hysteresis bit 1 */
+#define COMP_CSR_COMPxOUT ((uint16_t)0x4000) /*!< COMPx output level */
+#define COMP_CSR_COMPxLOCK ((uint16_t)0x8000) /*!< COMPx lock */
+
+/******************************************************************************/
+/* */
+/* CRC calculation unit (CRC) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for CRC_DR register *********************/
+#define CRC_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data register bits */
+
+/******************* Bit definition for CRC_IDR register ********************/
+#define CRC_IDR_IDR ((uint8_t)0xFF) /*!< General-purpose 8-bit data register bits */
+
+/******************** Bit definition for CRC_CR register ********************/
+#define CRC_CR_RESET ((uint32_t)0x00000001) /*!< RESET the CRC computation unit bit */
+#define CRC_CR_POLYSIZE ((uint32_t)0x00000018) /*!< Polynomial size bits */
+#define CRC_CR_POLYSIZE_0 ((uint32_t)0x00000008) /*!< Polynomial size bit 0 */
+#define CRC_CR_POLYSIZE_1 ((uint32_t)0x00000010) /*!< Polynomial size bit 1 */
+#define CRC_CR_REV_IN ((uint32_t)0x00000060) /*!< REV_IN Reverse Input Data bits */
+#define CRC_CR_REV_IN_0 ((uint32_t)0x00000020) /*!< REV_IN Bit 0 */
+#define CRC_CR_REV_IN_1 ((uint32_t)0x00000040) /*!< REV_IN Bit 1 */
+#define CRC_CR_REV_OUT ((uint32_t)0x00000080) /*!< REV_OUT Reverse Output Data bits */
+
+/******************* Bit definition for CRC_INIT register *******************/
+#define CRC_INIT_INIT ((uint32_t)0xFFFFFFFF) /*!< Initial CRC value bits */
+
+/******************* Bit definition for CRC_POL register ********************/
+#define CRC_POL_POL ((uint32_t)0xFFFFFFFF) /*!< Coefficients of the polynomial */
+
+/******************************************************************************/
+/* */
+/* CRS Clock Recovery System */
+/******************************************************************************/
+
+/******************* Bit definition for CRS_CR register *********************/
+#define CRS_CR_SYNCOKIE ((uint32_t)0x00000001) /* SYNC event OK interrupt enable */
+#define CRS_CR_SYNCWARNIE ((uint32_t)0x00000002) /* SYNC warning interrupt enable */
+#define CRS_CR_ERRIE ((uint32_t)0x00000004) /* SYNC error interrupt enable */
+#define CRS_CR_ESYNCIE ((uint32_t)0x00000008) /* Expected SYNC(ESYNCF) interrupt Enable*/
+#define CRS_CR_CEN ((uint32_t)0x00000020) /* Frequency error counter enable */
+#define CRS_CR_AUTOTRIMEN ((uint32_t)0x00000040) /* Automatic trimming enable */
+#define CRS_CR_SWSYNC ((uint32_t)0x00000080) /* A Software SYNC event is generated */
+#define CRS_CR_TRIM ((uint32_t)0x00003F00) /* HSI48 oscillator smooth trimming */
+
+/******************* Bit definition for CRS_CFGR register *********************/
+#define CRS_CFGR_RELOAD ((uint32_t)0x0000FFFF) /* Counter reload value */
+#define CRS_CFGR_FELIM ((uint32_t)0x00FF0000) /* Frequency error limit */
+
+#define CRS_CFGR_SYNCDIV ((uint32_t)0x07000000) /* SYNC divider */
+#define CRS_CFGR_SYNCDIV_0 ((uint32_t)0x01000000) /* Bit 0 */
+#define CRS_CFGR_SYNCDIV_1 ((uint32_t)0x02000000) /* Bit 1 */
+#define CRS_CFGR_SYNCDIV_2 ((uint32_t)0x04000000) /* Bit 2 */
+
+#define CRS_CFGR_SYNCSRC ((uint32_t)0x30000000) /* SYNC signal source selection */
+#define CRS_CFGR_SYNCSRC_0 ((uint32_t)0x10000000) /* Bit 0 */
+#define CRS_CFGR_SYNCSRC_1 ((uint32_t)0x20000000) /* Bit 1 */
+
+#define CRS_CFGR_SYNCPOL ((uint32_t)0x80000000) /* SYNC polarity selection */
+
+/******************* Bit definition for CRS_ISR register *********************/
+#define CRS_ISR_SYNCOKF ((uint32_t)0x00000001) /* SYNC event OK flag */
+#define CRS_ISR_SYNCWARNF ((uint32_t)0x00000002) /* SYNC warning */
+#define CRS_ISR_ERRF ((uint32_t)0x00000004) /* SYNC error flag */
+#define CRS_ISR_ESYNCF ((uint32_t)0x00000008) /* Expected SYNC flag */
+#define CRS_ISR_SYNCERR ((uint32_t)0x00000100) /* SYNC error */
+#define CRS_ISR_SYNCMISS ((uint32_t)0x00000200) /* SYNC missed */
+#define CRS_ISR_TRIMOVF ((uint32_t)0x00000400) /* Trimming overflow or underflow */
+#define CRS_ISR_FEDIR ((uint32_t)0x00008000) /* Frequency error direction */
+#define CRS_ISR_FECAP ((uint32_t)0xFFFF0000) /* Frequency error capture */
+
+/******************* Bit definition for CRS_ICR register *********************/
+#define CRS_ICR_SYNCOKC ((uint32_t)0x00000001) /* SYNC event OK clear flag */
+#define CRS_ICR_SYNCWARNC ((uint32_t)0x00000002) /* SYNC warning clear flag */
+#define CRS_ICR_ERRC ((uint32_t)0x00000004) /* Error clear flag */
+#define CRS_ICR_ESYNCC ((uint32_t)0x00000008) /* Expected SYNC clear flag */
+
+/******************************************************************************/
+/* */
+/* Digital to Analog Converter (DAC) */
+/* */
+/******************************************************************************/
+/******************** Bit definition for DAC_CR register ********************/
+#define DAC_CR_EN1 ((uint32_t)0x00000001) /*!< DAC channel1 enable */
+#define DAC_CR_BOFF1 ((uint32_t)0x00000002) /*!< DAC channel1 output buffer disable */
+#define DAC_CR_TEN1 ((uint32_t)0x00000004) /*!< DAC channel1 Trigger enable */
+
+#define DAC_CR_TSEL1 ((uint32_t)0x00000038) /*!< TSEL1[2:0] (DAC channel1 Trigger selection) */
+#define DAC_CR_TSEL1_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define DAC_CR_TSEL1_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define DAC_CR_TSEL1_2 ((uint32_t)0x00000020) /*!< Bit 2 */
+
+#define DAC_CR_WAVE1 ((uint32_t)0x000000C0) /*!< WAVE1[1:0] (DAC channel1 noise/triangle wave generation enable) */
+#define DAC_CR_WAVE1_0 ((uint32_t)0x00000040) /*!< Bit 0 */
+#define DAC_CR_WAVE1_1 ((uint32_t)0x00000080) /*!< Bit 1 */
+
+#define DAC_CR_MAMP1 ((uint32_t)0x00000F00) /*!< MAMP1[3:0] (DAC channel1 Mask/Amplitude selector) */
+#define DAC_CR_MAMP1_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define DAC_CR_MAMP1_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define DAC_CR_MAMP1_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define DAC_CR_MAMP1_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+
+#define DAC_CR_DMAEN1 ((uint32_t)0x00001000) /*!< DAC channel1 DMA enable */
+#define DAC_CR_DMAUDRIE1 ((uint32_t)0x00002000) /*!< DAC channel1 DMA Underrun Interrupt enable */
+
+#define DAC_CR_EN2 ((uint32_t)0x00010000) /*!< DAC channel2 enable */
+#define DAC_CR_BOFF2 ((uint32_t)0x00020000) /*!< DAC channel2 output buffer disable */
+#define DAC_CR_TEN2 ((uint32_t)0x00040000) /*!< DAC channel2 Trigger enable */
+
+#define DAC_CR_TSEL2 ((uint32_t)0x00380000) /*!< TSEL2[2:0] (DAC channel2 Trigger selection) */
+#define DAC_CR_TSEL2_0 ((uint32_t)0x00080000) /*!< Bit 0 */
+#define DAC_CR_TSEL2_1 ((uint32_t)0x00100000) /*!< Bit 1 */
+#define DAC_CR_TSEL2_2 ((uint32_t)0x00200000) /*!< Bit 2 */
+
+#define DAC_CR_WAVE2 ((uint32_t)0x00C00000) /*!< WAVE2[1:0] (DAC channel2 noise/triangle wave generation enable) */
+#define DAC_CR_WAVE2_0 ((uint32_t)0x00400000) /*!< Bit 0 */
+#define DAC_CR_WAVE2_1 ((uint32_t)0x00800000) /*!< Bit 1 */
+
+#define DAC_CR_MAMP2 ((uint32_t)0x0F000000) /*!< MAMP2[3:0] (DAC channel2 Mask/Amplitude selector) */
+#define DAC_CR_MAMP2_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define DAC_CR_MAMP2_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define DAC_CR_MAMP2_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+#define DAC_CR_MAMP2_3 ((uint32_t)0x08000000) /*!< Bit 3 */
+
+#define DAC_CR_DMAEN2 ((uint32_t)0x10000000) /*!< DAC channel2 DMA enabled */
+#define DAC_CR_DMAUDRIE2 ((uint32_t)0x20000000) /*!< DAC channel2 DMA Underrun Interrupt enable */
+
+/***************** Bit definition for DAC_SWTRIGR register ******************/
+#define DAC_SWTRIGR_SWTRIG1 ((uint32_t)0x00000001) /*!< DAC channel1 software trigger */
+#define DAC_SWTRIGR_SWTRIG2 ((uint32_t)0x00000002) /*!< DAC channel2 software trigger */
+
+/***************** Bit definition for DAC_DHR12R1 register ******************/
+#define DAC_DHR12R1_DACC1DHR ((uint32_t)0x00000FFF) /*!< DAC channel1 12-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12L1 register ******************/
+#define DAC_DHR12L1_DACC1DHR ((uint32_t)0x0000FFF0) /*!< DAC channel1 12-bit Left aligned data */
+
+/****************** Bit definition for DAC_DHR8R1 register ******************/
+#define DAC_DHR8R1_DACC1DHR ((uint32_t)0x000000FF) /*!< DAC channel1 8-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12R2 register ******************/
+#define DAC_DHR12R2_DACC2DHR ((uint32_t)0x00000FFF) /*!< DAC channel2 12-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12L2 register ******************/
+#define DAC_DHR12L2_DACC2DHR ((uint32_t)0x0000FFF0) /*!< DAC channel2 12-bit Left aligned data */
+
+/****************** Bit definition for DAC_DHR8R2 register ******************/
+#define DAC_DHR8R2_DACC2DHR ((uint32_t)0x000000FF) /*!< DAC channel2 8-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12RD register ******************/
+#define DAC_DHR12RD_DACC1DHR ((uint32_t)0x00000FFF) /*!< DAC channel1 12-bit Right aligned data */
+#define DAC_DHR12RD_DACC2DHR ((uint32_t)0x0FFF0000) /*!< DAC channel2 12-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12LD register ******************/
+#define DAC_DHR12LD_DACC1DHR ((uint32_t)0x0000FFF0) /*!< DAC channel1 12-bit Left aligned data */
+#define DAC_DHR12LD_DACC2DHR ((uint32_t)0xFFF00000) /*!< DAC channel2 12-bit Left aligned data */
+
+/****************** Bit definition for DAC_DHR8RD register ******************/
+#define DAC_DHR8RD_DACC1DHR ((uint32_t)0x000000FF) /*!< DAC channel1 8-bit Right aligned data */
+#define DAC_DHR8RD_DACC2DHR ((uint32_t)0x0000FF00) /*!< DAC channel2 8-bit Right aligned data */
+
+/******************* Bit definition for DAC_DOR1 register *******************/
+#define DAC_DOR1_DACC1DOR ((uint32_t)0x00000FFF) /*!< DAC channel1 data output */
+
+/******************* Bit definition for DAC_DOR2 register *******************/
+#define DAC_DOR2_DACC2DOR ((uint32_t)0x00000FFF) /*!< DAC channel2 data output */
+
+/******************** Bit definition for DAC_SR register ********************/
+#define DAC_SR_DMAUDR1 ((uint32_t)0x00002000) /*!< DAC channel1 DMA underrun flag */
+#define DAC_SR_DMAUDR2 ((uint32_t)0x20000000) /*!< DAC channel2 DMA underrun flag */
+
+/******************************************************************************/
+/* */
+/* Debug MCU (DBGMCU) */
+/* */
+/******************************************************************************/
+
+/**************** Bit definition for DBGMCU_IDCODE register *****************/
+#define DBGMCU_IDCODE_DEV_ID ((uint32_t)0x00000FFF) /*!< Device Identifier */
+
+#define DBGMCU_IDCODE_REV_ID ((uint32_t)0xFFFF0000) /*!< REV_ID[15:0] bits (Revision Identifier) */
+#define DBGMCU_IDCODE_REV_ID_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define DBGMCU_IDCODE_REV_ID_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define DBGMCU_IDCODE_REV_ID_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define DBGMCU_IDCODE_REV_ID_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+#define DBGMCU_IDCODE_REV_ID_4 ((uint32_t)0x00100000) /*!< Bit 4 */
+#define DBGMCU_IDCODE_REV_ID_5 ((uint32_t)0x00200000) /*!< Bit 5 */
+#define DBGMCU_IDCODE_REV_ID_6 ((uint32_t)0x00400000) /*!< Bit 6 */
+#define DBGMCU_IDCODE_REV_ID_7 ((uint32_t)0x00800000) /*!< Bit 7 */
+#define DBGMCU_IDCODE_REV_ID_8 ((uint32_t)0x01000000) /*!< Bit 8 */
+#define DBGMCU_IDCODE_REV_ID_9 ((uint32_t)0x02000000) /*!< Bit 9 */
+#define DBGMCU_IDCODE_REV_ID_10 ((uint32_t)0x04000000) /*!< Bit 10 */
+#define DBGMCU_IDCODE_REV_ID_11 ((uint32_t)0x08000000) /*!< Bit 11 */
+#define DBGMCU_IDCODE_REV_ID_12 ((uint32_t)0x10000000) /*!< Bit 12 */
+#define DBGMCU_IDCODE_REV_ID_13 ((uint32_t)0x20000000) /*!< Bit 13 */
+#define DBGMCU_IDCODE_REV_ID_14 ((uint32_t)0x40000000) /*!< Bit 14 */
+#define DBGMCU_IDCODE_REV_ID_15 ((uint32_t)0x80000000) /*!< Bit 15 */
+
+/****************** Bit definition for DBGMCU_CR register *******************/
+#define DBGMCU_CR_DBG_STOP ((uint32_t)0x00000002) /*!< Debug Stop Mode */
+#define DBGMCU_CR_DBG_STANDBY ((uint32_t)0x00000004) /*!< Debug Standby mode */
+
+/****************** Bit definition for DBGMCU_APB1_FZ register **************/
+#define DBGMCU_APB1_FZ_DBG_TIM2_STOP ((uint32_t)0x00000001) /*!< TIM2 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM3_STOP ((uint32_t)0x00000002) /*!< TIM3 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM6_STOP ((uint32_t)0x00000010) /*!< TIM6 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM7_STOP ((uint32_t)0x00000020) /*!< TIM7 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM14_STOP ((uint32_t)0x00000100) /*!< TIM14 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_RTC_STOP ((uint32_t)0x00000400) /*!< RTC Calendar frozen when core is halted */
+#define DBGMCU_APB1_FZ_DBG_WWDG_STOP ((uint32_t)0x00000800) /*!< Debug Window Watchdog stopped when Core is halted */
+#define DBGMCU_APB1_FZ_DBG_IWDG_STOP ((uint32_t)0x00001000) /*!< Debug Independent Watchdog stopped when Core is halted */
+#define DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00200000) /*!< I2C1 SMBUS timeout mode stopped when Core is halted */
+
+/****************** Bit definition for DBGMCU_APB2_FZ register **************/
+#define DBGMCU_APB2_FZ_DBG_TIM1_STOP ((uint32_t)0x00000800) /*!< TIM1 counter stopped when core is halted */
+#define DBGMCU_APB2_FZ_DBG_TIM15_STOP ((uint32_t)0x00010000) /*!< TIM15 counter stopped when core is halted */
+#define DBGMCU_APB2_FZ_DBG_TIM16_STOP ((uint32_t)0x00020000) /*!< TIM16 counter stopped when core is halted */
+#define DBGMCU_APB2_FZ_DBG_TIM17_STOP ((uint32_t)0x00040000) /*!< TIM17 counter stopped when core is halted */
+
+/******************************************************************************/
+/* */
+/* DMA Controller (DMA) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for DMA_ISR register ********************/
+#define DMA_ISR_GIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt flag */
+#define DMA_ISR_TCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete flag */
+#define DMA_ISR_HTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer flag */
+#define DMA_ISR_TEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error flag */
+#define DMA_ISR_GIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt flag */
+#define DMA_ISR_TCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete flag */
+#define DMA_ISR_HTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer flag */
+#define DMA_ISR_TEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error flag */
+#define DMA_ISR_GIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt flag */
+#define DMA_ISR_TCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete flag */
+#define DMA_ISR_HTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer flag */
+#define DMA_ISR_TEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error flag */
+#define DMA_ISR_GIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt flag */
+#define DMA_ISR_TCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete flag */
+#define DMA_ISR_HTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer flag */
+#define DMA_ISR_TEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error flag */
+#define DMA_ISR_GIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt flag */
+#define DMA_ISR_TCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete flag */
+#define DMA_ISR_HTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer flag */
+#define DMA_ISR_TEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error flag */
+#define DMA_ISR_GIF6 ((uint32_t)0x00100000) /*!< Channel 6 Global interrupt flag */
+#define DMA_ISR_TCIF6 ((uint32_t)0x00200000) /*!< Channel 6 Transfer Complete flag */
+#define DMA_ISR_HTIF6 ((uint32_t)0x00400000) /*!< Channel 6 Half Transfer flag */
+#define DMA_ISR_TEIF6 ((uint32_t)0x00800000) /*!< Channel 6 Transfer Error flag */
+#define DMA_ISR_GIF7 ((uint32_t)0x01000000) /*!< Channel 7 Global interrupt flag */
+#define DMA_ISR_TCIF7 ((uint32_t)0x02000000) /*!< Channel 7 Transfer Complete flag */
+#define DMA_ISR_HTIF7 ((uint32_t)0x04000000) /*!< Channel 7 Half Transfer flag */
+#define DMA_ISR_TEIF7 ((uint32_t)0x08000000) /*!< Channel 7 Transfer Error flag */
+
+/******************* Bit definition for DMA_IFCR register *******************/
+#define DMA_IFCR_CGIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt clear */
+#define DMA_IFCR_CTCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete clear */
+#define DMA_IFCR_CHTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer clear */
+#define DMA_IFCR_CTEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error clear */
+#define DMA_IFCR_CGIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt clear */
+#define DMA_IFCR_CTCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete clear */
+#define DMA_IFCR_CHTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer clear */
+#define DMA_IFCR_CTEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error clear */
+#define DMA_IFCR_CGIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt clear */
+#define DMA_IFCR_CTCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete clear */
+#define DMA_IFCR_CHTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer clear */
+#define DMA_IFCR_CTEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error clear */
+#define DMA_IFCR_CGIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt clear */
+#define DMA_IFCR_CTCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete clear */
+#define DMA_IFCR_CHTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer clear */
+#define DMA_IFCR_CTEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error clear */
+#define DMA_IFCR_CGIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt clear */
+#define DMA_IFCR_CTCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete clear */
+#define DMA_IFCR_CHTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer clear */
+#define DMA_IFCR_CTEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error clear */
+#define DMA_IFCR_CGIF6 ((uint32_t)0x00100000) /*!< Channel 6 Global interrupt clear */
+#define DMA_IFCR_CTCIF6 ((uint32_t)0x00200000) /*!< Channel 6 Transfer Complete clear */
+#define DMA_IFCR_CHTIF6 ((uint32_t)0x00400000) /*!< Channel 6 Half Transfer clear */
+#define DMA_IFCR_CTEIF6 ((uint32_t)0x00800000) /*!< Channel 6 Transfer Error clear */
+#define DMA_IFCR_CGIF7 ((uint32_t)0x01000000) /*!< Channel 7 Global interrupt clear */
+#define DMA_IFCR_CTCIF7 ((uint32_t)0x02000000) /*!< Channel 7 Transfer Complete clear */
+#define DMA_IFCR_CHTIF7 ((uint32_t)0x04000000) /*!< Channel 7 Half Transfer clear */
+#define DMA_IFCR_CTEIF7 ((uint32_t)0x08000000) /*!< Channel 7 Transfer Error clear */
+
+/******************* Bit definition for DMA_CCR register ********************/
+#define DMA_CCR_EN ((uint32_t)0x00000001) /*!< Channel enable */
+#define DMA_CCR_TCIE ((uint32_t)0x00000002) /*!< Transfer complete interrupt enable */
+#define DMA_CCR_HTIE ((uint32_t)0x00000004) /*!< Half Transfer interrupt enable */
+#define DMA_CCR_TEIE ((uint32_t)0x00000008) /*!< Transfer error interrupt enable */
+#define DMA_CCR_DIR ((uint32_t)0x00000010) /*!< Data transfer direction */
+#define DMA_CCR_CIRC ((uint32_t)0x00000020) /*!< Circular mode */
+#define DMA_CCR_PINC ((uint32_t)0x00000040) /*!< Peripheral increment mode */
+#define DMA_CCR_MINC ((uint32_t)0x00000080) /*!< Memory increment mode */
+
+#define DMA_CCR_PSIZE ((uint32_t)0x00000300) /*!< PSIZE[1:0] bits (Peripheral size) */
+#define DMA_CCR_PSIZE_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define DMA_CCR_PSIZE_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+
+#define DMA_CCR_MSIZE ((uint32_t)0x00000C00) /*!< MSIZE[1:0] bits (Memory size) */
+#define DMA_CCR_MSIZE_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define DMA_CCR_MSIZE_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+
+#define DMA_CCR_PL ((uint32_t)0x00003000) /*!< PL[1:0] bits(Channel Priority level)*/
+#define DMA_CCR_PL_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define DMA_CCR_PL_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+
+#define DMA_CCR_MEM2MEM ((uint32_t)0x00004000) /*!< Memory to memory mode */
+
+/****************** Bit definition for DMA_CNDTR register *******************/
+#define DMA_CNDTR_NDT ((uint32_t)0x0000FFFF) /*!< Number of data to Transfer */
+
+/****************** Bit definition for DMA_CPAR register ********************/
+#define DMA_CPAR_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */
+
+/****************** Bit definition for DMA_CMAR register ********************/
+#define DMA_CMAR_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */
+
+/******************************************************************************/
+/* */
+/* External Interrupt/Event Controller (EXTI) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for EXTI_IMR register *******************/
+#define EXTI_IMR_MR0 ((uint32_t)0x00000001) /*!< Interrupt Mask on line 0 */
+#define EXTI_IMR_MR1 ((uint32_t)0x00000002) /*!< Interrupt Mask on line 1 */
+#define EXTI_IMR_MR2 ((uint32_t)0x00000004) /*!< Interrupt Mask on line 2 */
+#define EXTI_IMR_MR3 ((uint32_t)0x00000008) /*!< Interrupt Mask on line 3 */
+#define EXTI_IMR_MR4 ((uint32_t)0x00000010) /*!< Interrupt Mask on line 4 */
+#define EXTI_IMR_MR5 ((uint32_t)0x00000020) /*!< Interrupt Mask on line 5 */
+#define EXTI_IMR_MR6 ((uint32_t)0x00000040) /*!< Interrupt Mask on line 6 */
+#define EXTI_IMR_MR7 ((uint32_t)0x00000080) /*!< Interrupt Mask on line 7 */
+#define EXTI_IMR_MR8 ((uint32_t)0x00000100) /*!< Interrupt Mask on line 8 */
+#define EXTI_IMR_MR9 ((uint32_t)0x00000200) /*!< Interrupt Mask on line 9 */
+#define EXTI_IMR_MR10 ((uint32_t)0x00000400) /*!< Interrupt Mask on line 10 */
+#define EXTI_IMR_MR11 ((uint32_t)0x00000800) /*!< Interrupt Mask on line 11 */
+#define EXTI_IMR_MR12 ((uint32_t)0x00001000) /*!< Interrupt Mask on line 12 */
+#define EXTI_IMR_MR13 ((uint32_t)0x00002000) /*!< Interrupt Mask on line 13 */
+#define EXTI_IMR_MR14 ((uint32_t)0x00004000) /*!< Interrupt Mask on line 14 */
+#define EXTI_IMR_MR15 ((uint32_t)0x00008000) /*!< Interrupt Mask on line 15 */
+#define EXTI_IMR_MR16 ((uint32_t)0x00010000) /*!< Interrupt Mask on line 16 */
+#define EXTI_IMR_MR17 ((uint32_t)0x00020000) /*!< Interrupt Mask on line 17 */
+#define EXTI_IMR_MR19 ((uint32_t)0x00080000) /*!< Interrupt Mask on line 19 */
+#define EXTI_IMR_MR21 ((uint32_t)0x00200000) /*!< Interrupt Mask on line 21 */
+#define EXTI_IMR_MR22 ((uint32_t)0x00400000) /*!< Interrupt Mask on line 22 */
+#define EXTI_IMR_MR23 ((uint32_t)0x00800000) /*!< Interrupt Mask on line 23 */
+#define EXTI_IMR_MR25 ((uint32_t)0x02000000) /*!< Interrupt Mask on line 25 */
+#define EXTI_IMR_MR27 ((uint32_t)0x08000000) /*!< Interrupt Mask on line 27 */
+
+/****************** Bit definition for EXTI_EMR register ********************/
+#define EXTI_EMR_MR0 ((uint32_t)0x00000001) /*!< Event Mask on line 0 */
+#define EXTI_EMR_MR1 ((uint32_t)0x00000002) /*!< Event Mask on line 1 */
+#define EXTI_EMR_MR2 ((uint32_t)0x00000004) /*!< Event Mask on line 2 */
+#define EXTI_EMR_MR3 ((uint32_t)0x00000008) /*!< Event Mask on line 3 */
+#define EXTI_EMR_MR4 ((uint32_t)0x00000010) /*!< Event Mask on line 4 */
+#define EXTI_EMR_MR5 ((uint32_t)0x00000020) /*!< Event Mask on line 5 */
+#define EXTI_EMR_MR6 ((uint32_t)0x00000040) /*!< Event Mask on line 6 */
+#define EXTI_EMR_MR7 ((uint32_t)0x00000080) /*!< Event Mask on line 7 */
+#define EXTI_EMR_MR8 ((uint32_t)0x00000100) /*!< Event Mask on line 8 */
+#define EXTI_EMR_MR9 ((uint32_t)0x00000200) /*!< Event Mask on line 9 */
+#define EXTI_EMR_MR10 ((uint32_t)0x00000400) /*!< Event Mask on line 10 */
+#define EXTI_EMR_MR11 ((uint32_t)0x00000800) /*!< Event Mask on line 11 */
+#define EXTI_EMR_MR12 ((uint32_t)0x00001000) /*!< Event Mask on line 12 */
+#define EXTI_EMR_MR13 ((uint32_t)0x00002000) /*!< Event Mask on line 13 */
+#define EXTI_EMR_MR14 ((uint32_t)0x00004000) /*!< Event Mask on line 14 */
+#define EXTI_EMR_MR15 ((uint32_t)0x00008000) /*!< Event Mask on line 15 */
+#define EXTI_EMR_MR16 ((uint32_t)0x00010000) /*!< Event Mask on line 16 */
+#define EXTI_EMR_MR17 ((uint32_t)0x00020000) /*!< Event Mask on line 17 */
+#define EXTI_EMR_MR19 ((uint32_t)0x00080000) /*!< Event Mask on line 19 */
+#define EXTI_EMR_MR21 ((uint32_t)0x00200000) /*!< Event Mask on line 21 */
+#define EXTI_EMR_MR22 ((uint32_t)0x00400000) /*!< Event Mask on line 22 */
+#define EXTI_EMR_MR23 ((uint32_t)0x00800000) /*!< Event Mask on line 23 */
+#define EXTI_EMR_MR25 ((uint32_t)0x02000000) /*!< Event Mask on line 25 */
+#define EXTI_EMR_MR27 ((uint32_t)0x08000000) /*!< Event Mask on line 27 */
+
+/******************* Bit definition for EXTI_RTSR register ******************/
+#define EXTI_RTSR_TR0 ((uint32_t)0x00000001) /*!< Rising trigger event configuration bit of line 0 */
+#define EXTI_RTSR_TR1 ((uint32_t)0x00000002) /*!< Rising trigger event configuration bit of line 1 */
+#define EXTI_RTSR_TR2 ((uint32_t)0x00000004) /*!< Rising trigger event configuration bit of line 2 */
+#define EXTI_RTSR_TR3 ((uint32_t)0x00000008) /*!< Rising trigger event configuration bit of line 3 */
+#define EXTI_RTSR_TR4 ((uint32_t)0x00000010) /*!< Rising trigger event configuration bit of line 4 */
+#define EXTI_RTSR_TR5 ((uint32_t)0x00000020) /*!< Rising trigger event configuration bit of line 5 */
+#define EXTI_RTSR_TR6 ((uint32_t)0x00000040) /*!< Rising trigger event configuration bit of line 6 */
+#define EXTI_RTSR_TR7 ((uint32_t)0x00000080) /*!< Rising trigger event configuration bit of line 7 */
+#define EXTI_RTSR_TR8 ((uint32_t)0x00000100) /*!< Rising trigger event configuration bit of line 8 */
+#define EXTI_RTSR_TR9 ((uint32_t)0x00000200) /*!< Rising trigger event configuration bit of line 9 */
+#define EXTI_RTSR_TR10 ((uint32_t)0x00000400) /*!< Rising trigger event configuration bit of line 10 */
+#define EXTI_RTSR_TR11 ((uint32_t)0x00000800) /*!< Rising trigger event configuration bit of line 11 */
+#define EXTI_RTSR_TR12 ((uint32_t)0x00001000) /*!< Rising trigger event configuration bit of line 12 */
+#define EXTI_RTSR_TR13 ((uint32_t)0x00002000) /*!< Rising trigger event configuration bit of line 13 */
+#define EXTI_RTSR_TR14 ((uint32_t)0x00004000) /*!< Rising trigger event configuration bit of line 14 */
+#define EXTI_RTSR_TR15 ((uint32_t)0x00008000) /*!< Rising trigger event configuration bit of line 15 */
+#define EXTI_RTSR_TR16 ((uint32_t)0x00010000) /*!< Rising trigger event configuration bit of line 16 */
+#define EXTI_RTSR_TR17 ((uint32_t)0x00020000) /*!< Rising trigger event configuration bit of line 17 */
+#define EXTI_RTSR_TR19 ((uint32_t)0x00080000) /*!< Rising trigger event configuration bit of line 19 */
+
+/******************* Bit definition for EXTI_FTSR register *******************/
+#define EXTI_FTSR_TR0 ((uint32_t)0x00000001) /*!< Falling trigger event configuration bit of line 0 */
+#define EXTI_FTSR_TR1 ((uint32_t)0x00000002) /*!< Falling trigger event configuration bit of line 1 */
+#define EXTI_FTSR_TR2 ((uint32_t)0x00000004) /*!< Falling trigger event configuration bit of line 2 */
+#define EXTI_FTSR_TR3 ((uint32_t)0x00000008) /*!< Falling trigger event configuration bit of line 3 */
+#define EXTI_FTSR_TR4 ((uint32_t)0x00000010) /*!< Falling trigger event configuration bit of line 4 */
+#define EXTI_FTSR_TR5 ((uint32_t)0x00000020) /*!< Falling trigger event configuration bit of line 5 */
+#define EXTI_FTSR_TR6 ((uint32_t)0x00000040) /*!< Falling trigger event configuration bit of line 6 */
+#define EXTI_FTSR_TR7 ((uint32_t)0x00000080) /*!< Falling trigger event configuration bit of line 7 */
+#define EXTI_FTSR_TR8 ((uint32_t)0x00000100) /*!< Falling trigger event configuration bit of line 8 */
+#define EXTI_FTSR_TR9 ((uint32_t)0x00000200) /*!< Falling trigger event configuration bit of line 9 */
+#define EXTI_FTSR_TR10 ((uint32_t)0x00000400) /*!< Falling trigger event configuration bit of line 10 */
+#define EXTI_FTSR_TR11 ((uint32_t)0x00000800) /*!< Falling trigger event configuration bit of line 11 */
+#define EXTI_FTSR_TR12 ((uint32_t)0x00001000) /*!< Falling trigger event configuration bit of line 12 */
+#define EXTI_FTSR_TR13 ((uint32_t)0x00002000) /*!< Falling trigger event configuration bit of line 13 */
+#define EXTI_FTSR_TR14 ((uint32_t)0x00004000) /*!< Falling trigger event configuration bit of line 14 */
+#define EXTI_FTSR_TR15 ((uint32_t)0x00008000) /*!< Falling trigger event configuration bit of line 15 */
+#define EXTI_FTSR_TR16 ((uint32_t)0x00010000) /*!< Falling trigger event configuration bit of line 16 */
+#define EXTI_FTSR_TR17 ((uint32_t)0x00020000) /*!< Falling trigger event configuration bit of line 17 */
+#define EXTI_FTSR_TR19 ((uint32_t)0x00080000) /*!< Falling trigger event configuration bit of line 19 */
+
+/******************* Bit definition for EXTI_SWIER register *******************/
+#define EXTI_SWIER_SWIER0 ((uint32_t)0x00000001) /*!< Software Interrupt on line 0 */
+#define EXTI_SWIER_SWIER1 ((uint32_t)0x00000002) /*!< Software Interrupt on line 1 */
+#define EXTI_SWIER_SWIER2 ((uint32_t)0x00000004) /*!< Software Interrupt on line 2 */
+#define EXTI_SWIER_SWIER3 ((uint32_t)0x00000008) /*!< Software Interrupt on line 3 */
+#define EXTI_SWIER_SWIER4 ((uint32_t)0x00000010) /*!< Software Interrupt on line 4 */
+#define EXTI_SWIER_SWIER5 ((uint32_t)0x00000020) /*!< Software Interrupt on line 5 */
+#define EXTI_SWIER_SWIER6 ((uint32_t)0x00000040) /*!< Software Interrupt on line 6 */
+#define EXTI_SWIER_SWIER7 ((uint32_t)0x00000080) /*!< Software Interrupt on line 7 */
+#define EXTI_SWIER_SWIER8 ((uint32_t)0x00000100) /*!< Software Interrupt on line 8 */
+#define EXTI_SWIER_SWIER9 ((uint32_t)0x00000200) /*!< Software Interrupt on line 9 */
+#define EXTI_SWIER_SWIER10 ((uint32_t)0x00000400) /*!< Software Interrupt on line 10 */
+#define EXTI_SWIER_SWIER11 ((uint32_t)0x00000800) /*!< Software Interrupt on line 11 */
+#define EXTI_SWIER_SWIER12 ((uint32_t)0x00001000) /*!< Software Interrupt on line 12 */
+#define EXTI_SWIER_SWIER13 ((uint32_t)0x00002000) /*!< Software Interrupt on line 13 */
+#define EXTI_SWIER_SWIER14 ((uint32_t)0x00004000) /*!< Software Interrupt on line 14 */
+#define EXTI_SWIER_SWIER15 ((uint32_t)0x00008000) /*!< Software Interrupt on line 15 */
+#define EXTI_SWIER_SWIER16 ((uint32_t)0x00010000) /*!< Software Interrupt on line 16 */
+#define EXTI_SWIER_SWIER17 ((uint32_t)0x00020000) /*!< Software Interrupt on line 17 */
+#define EXTI_SWIER_SWIER19 ((uint32_t)0x00080000) /*!< Software Interrupt on line 19 */
+
+/****************** Bit definition for EXTI_PR register *********************/
+#define EXTI_PR_PR0 ((uint32_t)0x00000001) /*!< Pending bit 0 */
+#define EXTI_PR_PR1 ((uint32_t)0x00000002) /*!< Pending bit 1 */
+#define EXTI_PR_PR2 ((uint32_t)0x00000004) /*!< Pending bit 2 */
+#define EXTI_PR_PR3 ((uint32_t)0x00000008) /*!< Pending bit 3 */
+#define EXTI_PR_PR4 ((uint32_t)0x00000010) /*!< Pending bit 4 */
+#define EXTI_PR_PR5 ((uint32_t)0x00000020) /*!< Pending bit 5 */
+#define EXTI_PR_PR6 ((uint32_t)0x00000040) /*!< Pending bit 6 */
+#define EXTI_PR_PR7 ((uint32_t)0x00000080) /*!< Pending bit 7 */
+#define EXTI_PR_PR8 ((uint32_t)0x00000100) /*!< Pending bit 8 */
+#define EXTI_PR_PR9 ((uint32_t)0x00000200) /*!< Pending bit 9 */
+#define EXTI_PR_PR10 ((uint32_t)0x00000400) /*!< Pending bit 10 */
+#define EXTI_PR_PR11 ((uint32_t)0x00000800) /*!< Pending bit 11 */
+#define EXTI_PR_PR12 ((uint32_t)0x00001000) /*!< Pending bit 12 */
+#define EXTI_PR_PR13 ((uint32_t)0x00002000) /*!< Pending bit 13 */
+#define EXTI_PR_PR14 ((uint32_t)0x00004000) /*!< Pending bit 14 */
+#define EXTI_PR_PR15 ((uint32_t)0x00008000) /*!< Pending bit 15 */
+#define EXTI_PR_PR16 ((uint32_t)0x00010000) /*!< Pending bit 16 */
+#define EXTI_PR_PR17 ((uint32_t)0x00020000) /*!< Pending bit 17 */
+#define EXTI_PR_PR19 ((uint32_t)0x00080000) /*!< Pending bit 19 */
+
+/******************************************************************************/
+/* */
+/* FLASH and Option Bytes Registers */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for FLASH_ACR register ******************/
+#define FLASH_ACR_LATENCY ((uint32_t)0x00000001) /*!< LATENCY bit (Latency) */
+
+#define FLASH_ACR_PRFTBE ((uint32_t)0x00000010) /*!< Prefetch Buffer Enable */
+#define FLASH_ACR_PRFTBS ((uint32_t)0x00000020) /*!< Prefetch Buffer Status */
+
+/****************** Bit definition for FLASH_KEYR register ******************/
+#define FLASH_KEYR_FKEYR ((uint32_t)0xFFFFFFFF) /*!< FPEC Key */
+
+/***************** Bit definition for FLASH_OPTKEYR register ****************/
+#define FLASH_OPTKEYR_OPTKEYR ((uint32_t)0xFFFFFFFF) /*!< Option Byte Key */
+
+/****************** FLASH Keys **********************************************/
+#define FLASH_FKEY1 ((uint32_t)0x45670123) /*!< Flash program erase key1 */
+#define FLASH_FKEY2 ((uint32_t)0xCDEF89AB) /*!< Flash program erase key2: used with FLASH_PEKEY1
+ to unlock the write access to the FPEC. */
+
+#define FLASH_OPTKEY1 ((uint32_t)0x45670123) /*!< Flash option key1 */
+#define FLASH_OPTKEY2 ((uint32_t)0xCDEF89AB) /*!< Flash option key2: used with FLASH_OPTKEY1 to
+ unlock the write access to the option byte block */
+
+/****************** Bit definition for FLASH_SR register *******************/
+#define FLASH_SR_BSY ((uint32_t)0x00000001) /*!< Busy */
+#define FLASH_SR_PGERR ((uint32_t)0x00000004) /*!< Programming Error */
+#define FLASH_SR_WRPRTERR ((uint32_t)0x00000010) /*!< Write Protection Error */
+#define FLASH_SR_EOP ((uint32_t)0x00000020) /*!< End of operation */
+#define FLASH_SR_WRPERR FLASH_SR_WRPRTERR /*!< Legacy of Write Protection Error */
+
+/******************* Bit definition for FLASH_CR register *******************/
+#define FLASH_CR_PG ((uint32_t)0x00000001) /*!< Programming */
+#define FLASH_CR_PER ((uint32_t)0x00000002) /*!< Page Erase */
+#define FLASH_CR_MER ((uint32_t)0x00000004) /*!< Mass Erase */
+#define FLASH_CR_OPTPG ((uint32_t)0x00000010) /*!< Option Byte Programming */
+#define FLASH_CR_OPTER ((uint32_t)0x00000020) /*!< Option Byte Erase */
+#define FLASH_CR_STRT ((uint32_t)0x00000040) /*!< Start */
+#define FLASH_CR_LOCK ((uint32_t)0x00000080) /*!< Lock */
+#define FLASH_CR_OPTWRE ((uint32_t)0x00000200) /*!< Option Bytes Write Enable */
+#define FLASH_CR_ERRIE ((uint32_t)0x00000400) /*!< Error Interrupt Enable */
+#define FLASH_CR_EOPIE ((uint32_t)0x00001000) /*!< End of operation interrupt enable */
+#define FLASH_CR_OBL_LAUNCH ((uint32_t)0x00002000) /*!< Option Bytes Loader Launch */
+
+/******************* Bit definition for FLASH_AR register *******************/
+#define FLASH_AR_FAR ((uint32_t)0xFFFFFFFF) /*!< Flash Address */
+
+/****************** Bit definition for FLASH_OBR register *******************/
+#define FLASH_OBR_OPTERR ((uint32_t)0x00000001) /*!< Option Byte Error */
+#define FLASH_OBR_RDPRT1 ((uint32_t)0x00000002) /*!< Read protection Level 1 */
+#define FLASH_OBR_RDPRT2 ((uint32_t)0x00000004) /*!< Read protection Level 2 */
+
+#define FLASH_OBR_USER ((uint32_t)0x00003700) /*!< User Option Bytes */
+#define FLASH_OBR_IWDG_SW ((uint32_t)0x00000100) /*!< IWDG SW */
+#define FLASH_OBR_nRST_STOP ((uint32_t)0x00000200) /*!< nRST_STOP */
+#define FLASH_OBR_nRST_STDBY ((uint32_t)0x00000400) /*!< nRST_STDBY */
+#define FLASH_OBR_nBOOT1 ((uint32_t)0x00001000) /*!< nBOOT1 */
+#define FLASH_OBR_VDDA_MONITOR ((uint32_t)0x00002000) /*!< VDDA power supply supervisor */
+
+/* Old BOOT1 bit definition, maintained for legacy purpose */
+#define FLASH_OBR_BOOT1 FLASH_OBR_nBOOT1
+
+/* Old OBR_VDDA bit definition, maintained for legacy purpose */
+#define FLASH_OBR_VDDA_ANALOG FLASH_OBR_VDDA_MONITOR
+
+/****************** Bit definition for FLASH_WRPR register ******************/
+#define FLASH_WRPR_WRP ((uint32_t)0x0000FFFF) /*!< Write Protect */
+
+/*----------------------------------------------------------------------------*/
+
+/****************** Bit definition for OB_RDP register **********************/
+#define OB_RDP_RDP ((uint32_t)0x000000FF) /*!< Read protection option byte */
+#define OB_RDP_nRDP ((uint32_t)0x0000FF00) /*!< Read protection complemented option byte */
+
+/****************** Bit definition for OB_USER register *********************/
+#define OB_USER_USER ((uint32_t)0x00FF0000) /*!< User option byte */
+#define OB_USER_nUSER ((uint32_t)0xFF000000) /*!< User complemented option byte */
+
+/****************** Bit definition for OB_WRP0 register *********************/
+#define OB_WRP0_WRP0 ((uint32_t)0x000000FF) /*!< Flash memory write protection option bytes */
+#define OB_WRP0_nWRP0 ((uint32_t)0x0000FF00) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for OB_WRP1 register *********************/
+#define OB_WRP1_WRP1 ((uint32_t)0x00FF0000) /*!< Flash memory write protection option bytes */
+#define OB_WRP1_nWRP1 ((uint32_t)0xFF000000) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for OB_WRP2 register *********************/
+#define OB_WRP2_WRP2 ((uint32_t)0x000000FF) /*!< Flash memory write protection option bytes */
+#define OB_WRP2_nWRP2 ((uint32_t)0x0000FF00) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for OB_WRP3 register *********************/
+#define OB_WRP3_WRP3 ((uint32_t)0x00FF0000) /*!< Flash memory write protection option bytes */
+#define OB_WRP3_nWRP3 ((uint32_t)0xFF000000) /*!< Flash memory write protection complemented option bytes */
+
+/******************************************************************************/
+/* */
+/* General Purpose IOs (GPIO) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for GPIO_MODER register *****************/
+#define GPIO_MODER_MODER0 ((uint32_t)0x00000003)
+#define GPIO_MODER_MODER0_0 ((uint32_t)0x00000001)
+#define GPIO_MODER_MODER0_1 ((uint32_t)0x00000002)
+#define GPIO_MODER_MODER1 ((uint32_t)0x0000000C)
+#define GPIO_MODER_MODER1_0 ((uint32_t)0x00000004)
+#define GPIO_MODER_MODER1_1 ((uint32_t)0x00000008)
+#define GPIO_MODER_MODER2 ((uint32_t)0x00000030)
+#define GPIO_MODER_MODER2_0 ((uint32_t)0x00000010)
+#define GPIO_MODER_MODER2_1 ((uint32_t)0x00000020)
+#define GPIO_MODER_MODER3 ((uint32_t)0x000000C0)
+#define GPIO_MODER_MODER3_0 ((uint32_t)0x00000040)
+#define GPIO_MODER_MODER3_1 ((uint32_t)0x00000080)
+#define GPIO_MODER_MODER4 ((uint32_t)0x00000300)
+#define GPIO_MODER_MODER4_0 ((uint32_t)0x00000100)
+#define GPIO_MODER_MODER4_1 ((uint32_t)0x00000200)
+#define GPIO_MODER_MODER5 ((uint32_t)0x00000C00)
+#define GPIO_MODER_MODER5_0 ((uint32_t)0x00000400)
+#define GPIO_MODER_MODER5_1 ((uint32_t)0x00000800)
+#define GPIO_MODER_MODER6 ((uint32_t)0x00003000)
+#define GPIO_MODER_MODER6_0 ((uint32_t)0x00001000)
+#define GPIO_MODER_MODER6_1 ((uint32_t)0x00002000)
+#define GPIO_MODER_MODER7 ((uint32_t)0x0000C000)
+#define GPIO_MODER_MODER7_0 ((uint32_t)0x00004000)
+#define GPIO_MODER_MODER7_1 ((uint32_t)0x00008000)
+#define GPIO_MODER_MODER8 ((uint32_t)0x00030000)
+#define GPIO_MODER_MODER8_0 ((uint32_t)0x00010000)
+#define GPIO_MODER_MODER8_1 ((uint32_t)0x00020000)
+#define GPIO_MODER_MODER9 ((uint32_t)0x000C0000)
+#define GPIO_MODER_MODER9_0 ((uint32_t)0x00040000)
+#define GPIO_MODER_MODER9_1 ((uint32_t)0x00080000)
+#define GPIO_MODER_MODER10 ((uint32_t)0x00300000)
+#define GPIO_MODER_MODER10_0 ((uint32_t)0x00100000)
+#define GPIO_MODER_MODER10_1 ((uint32_t)0x00200000)
+#define GPIO_MODER_MODER11 ((uint32_t)0x00C00000)
+#define GPIO_MODER_MODER11_0 ((uint32_t)0x00400000)
+#define GPIO_MODER_MODER11_1 ((uint32_t)0x00800000)
+#define GPIO_MODER_MODER12 ((uint32_t)0x03000000)
+#define GPIO_MODER_MODER12_0 ((uint32_t)0x01000000)
+#define GPIO_MODER_MODER12_1 ((uint32_t)0x02000000)
+#define GPIO_MODER_MODER13 ((uint32_t)0x0C000000)
+#define GPIO_MODER_MODER13_0 ((uint32_t)0x04000000)
+#define GPIO_MODER_MODER13_1 ((uint32_t)0x08000000)
+#define GPIO_MODER_MODER14 ((uint32_t)0x30000000)
+#define GPIO_MODER_MODER14_0 ((uint32_t)0x10000000)
+#define GPIO_MODER_MODER14_1 ((uint32_t)0x20000000)
+#define GPIO_MODER_MODER15 ((uint32_t)0xC0000000)
+#define GPIO_MODER_MODER15_0 ((uint32_t)0x40000000)
+#define GPIO_MODER_MODER15_1 ((uint32_t)0x80000000)
+
+/****************** Bit definition for GPIO_OTYPER register *****************/
+#define GPIO_OTYPER_OT_0 ((uint32_t)0x00000001)
+#define GPIO_OTYPER_OT_1 ((uint32_t)0x00000002)
+#define GPIO_OTYPER_OT_2 ((uint32_t)0x00000004)
+#define GPIO_OTYPER_OT_3 ((uint32_t)0x00000008)
+#define GPIO_OTYPER_OT_4 ((uint32_t)0x00000010)
+#define GPIO_OTYPER_OT_5 ((uint32_t)0x00000020)
+#define GPIO_OTYPER_OT_6 ((uint32_t)0x00000040)
+#define GPIO_OTYPER_OT_7 ((uint32_t)0x00000080)
+#define GPIO_OTYPER_OT_8 ((uint32_t)0x00000100)
+#define GPIO_OTYPER_OT_9 ((uint32_t)0x00000200)
+#define GPIO_OTYPER_OT_10 ((uint32_t)0x00000400)
+#define GPIO_OTYPER_OT_11 ((uint32_t)0x00000800)
+#define GPIO_OTYPER_OT_12 ((uint32_t)0x00001000)
+#define GPIO_OTYPER_OT_13 ((uint32_t)0x00002000)
+#define GPIO_OTYPER_OT_14 ((uint32_t)0x00004000)
+#define GPIO_OTYPER_OT_15 ((uint32_t)0x00008000)
+
+/**************** Bit definition for GPIO_OSPEEDR register ******************/
+#define GPIO_OSPEEDR_OSPEEDR0 ((uint32_t)0x00000003)
+#define GPIO_OSPEEDR_OSPEEDR0_0 ((uint32_t)0x00000001)
+#define GPIO_OSPEEDR_OSPEEDR0_1 ((uint32_t)0x00000002)
+#define GPIO_OSPEEDR_OSPEEDR1 ((uint32_t)0x0000000C)
+#define GPIO_OSPEEDR_OSPEEDR1_0 ((uint32_t)0x00000004)
+#define GPIO_OSPEEDR_OSPEEDR1_1 ((uint32_t)0x00000008)
+#define GPIO_OSPEEDR_OSPEEDR2 ((uint32_t)0x00000030)
+#define GPIO_OSPEEDR_OSPEEDR2_0 ((uint32_t)0x00000010)
+#define GPIO_OSPEEDR_OSPEEDR2_1 ((uint32_t)0x00000020)
+#define GPIO_OSPEEDR_OSPEEDR3 ((uint32_t)0x000000C0)
+#define GPIO_OSPEEDR_OSPEEDR3_0 ((uint32_t)0x00000040)
+#define GPIO_OSPEEDR_OSPEEDR3_1 ((uint32_t)0x00000080)
+#define GPIO_OSPEEDR_OSPEEDR4 ((uint32_t)0x00000300)
+#define GPIO_OSPEEDR_OSPEEDR4_0 ((uint32_t)0x00000100)
+#define GPIO_OSPEEDR_OSPEEDR4_1 ((uint32_t)0x00000200)
+#define GPIO_OSPEEDR_OSPEEDR5 ((uint32_t)0x00000C00)
+#define GPIO_OSPEEDR_OSPEEDR5_0 ((uint32_t)0x00000400)
+#define GPIO_OSPEEDR_OSPEEDR5_1 ((uint32_t)0x00000800)
+#define GPIO_OSPEEDR_OSPEEDR6 ((uint32_t)0x00003000)
+#define GPIO_OSPEEDR_OSPEEDR6_0 ((uint32_t)0x00001000)
+#define GPIO_OSPEEDR_OSPEEDR6_1 ((uint32_t)0x00002000)
+#define GPIO_OSPEEDR_OSPEEDR7 ((uint32_t)0x0000C000)
+#define GPIO_OSPEEDR_OSPEEDR7_0 ((uint32_t)0x00004000)
+#define GPIO_OSPEEDR_OSPEEDR7_1 ((uint32_t)0x00008000)
+#define GPIO_OSPEEDR_OSPEEDR8 ((uint32_t)0x00030000)
+#define GPIO_OSPEEDR_OSPEEDR8_0 ((uint32_t)0x00010000)
+#define GPIO_OSPEEDR_OSPEEDR8_1 ((uint32_t)0x00020000)
+#define GPIO_OSPEEDR_OSPEEDR9 ((uint32_t)0x000C0000)
+#define GPIO_OSPEEDR_OSPEEDR9_0 ((uint32_t)0x00040000)
+#define GPIO_OSPEEDR_OSPEEDR9_1 ((uint32_t)0x00080000)
+#define GPIO_OSPEEDR_OSPEEDR10 ((uint32_t)0x00300000)
+#define GPIO_OSPEEDR_OSPEEDR10_0 ((uint32_t)0x00100000)
+#define GPIO_OSPEEDR_OSPEEDR10_1 ((uint32_t)0x00200000)
+#define GPIO_OSPEEDR_OSPEEDR11 ((uint32_t)0x00C00000)
+#define GPIO_OSPEEDR_OSPEEDR11_0 ((uint32_t)0x00400000)
+#define GPIO_OSPEEDR_OSPEEDR11_1 ((uint32_t)0x00800000)
+#define GPIO_OSPEEDR_OSPEEDR12 ((uint32_t)0x03000000)
+#define GPIO_OSPEEDR_OSPEEDR12_0 ((uint32_t)0x01000000)
+#define GPIO_OSPEEDR_OSPEEDR12_1 ((uint32_t)0x02000000)
+#define GPIO_OSPEEDR_OSPEEDR13 ((uint32_t)0x0C000000)
+#define GPIO_OSPEEDR_OSPEEDR13_0 ((uint32_t)0x04000000)
+#define GPIO_OSPEEDR_OSPEEDR13_1 ((uint32_t)0x08000000)
+#define GPIO_OSPEEDR_OSPEEDR14 ((uint32_t)0x30000000)
+#define GPIO_OSPEEDR_OSPEEDR14_0 ((uint32_t)0x10000000)
+#define GPIO_OSPEEDR_OSPEEDR14_1 ((uint32_t)0x20000000)
+#define GPIO_OSPEEDR_OSPEEDR15 ((uint32_t)0xC0000000)
+#define GPIO_OSPEEDR_OSPEEDR15_0 ((uint32_t)0x40000000)
+#define GPIO_OSPEEDR_OSPEEDR15_1 ((uint32_t)0x80000000)
+
+/* Old Bit definition for GPIO_OSPEEDR register maintained for legacy purpose */
+#define GPIO_OSPEEDER_OSPEEDR0 GPIO_OSPEEDR_OSPEEDR0
+#define GPIO_OSPEEDER_OSPEEDR0_0 GPIO_OSPEEDR_OSPEEDR0_0
+#define GPIO_OSPEEDER_OSPEEDR0_1 GPIO_OSPEEDR_OSPEEDR0_1
+#define GPIO_OSPEEDER_OSPEEDR1 GPIO_OSPEEDR_OSPEEDR1
+#define GPIO_OSPEEDER_OSPEEDR1_0 GPIO_OSPEEDR_OSPEEDR1_0
+#define GPIO_OSPEEDER_OSPEEDR1_1 GPIO_OSPEEDR_OSPEEDR1_1
+#define GPIO_OSPEEDER_OSPEEDR2 GPIO_OSPEEDR_OSPEEDR2
+#define GPIO_OSPEEDER_OSPEEDR2_0 GPIO_OSPEEDR_OSPEEDR2_0
+#define GPIO_OSPEEDER_OSPEEDR2_1 GPIO_OSPEEDR_OSPEEDR2_1
+#define GPIO_OSPEEDER_OSPEEDR3 GPIO_OSPEEDR_OSPEEDR3
+#define GPIO_OSPEEDER_OSPEEDR3_0 GPIO_OSPEEDR_OSPEEDR3_0
+#define GPIO_OSPEEDER_OSPEEDR3_1 GPIO_OSPEEDR_OSPEEDR3_1
+#define GPIO_OSPEEDER_OSPEEDR4 GPIO_OSPEEDR_OSPEEDR4
+#define GPIO_OSPEEDER_OSPEEDR4_0 GPIO_OSPEEDR_OSPEEDR4_0
+#define GPIO_OSPEEDER_OSPEEDR4_1 GPIO_OSPEEDR_OSPEEDR4_1
+#define GPIO_OSPEEDER_OSPEEDR5 GPIO_OSPEEDR_OSPEEDR5
+#define GPIO_OSPEEDER_OSPEEDR5_0 GPIO_OSPEEDR_OSPEEDR5_0
+#define GPIO_OSPEEDER_OSPEEDR5_1 GPIO_OSPEEDR_OSPEEDR5_1
+#define GPIO_OSPEEDER_OSPEEDR6 GPIO_OSPEEDR_OSPEEDR6
+#define GPIO_OSPEEDER_OSPEEDR6_0 GPIO_OSPEEDR_OSPEEDR6_0
+#define GPIO_OSPEEDER_OSPEEDR6_1 GPIO_OSPEEDR_OSPEEDR6_1
+#define GPIO_OSPEEDER_OSPEEDR7 GPIO_OSPEEDR_OSPEEDR7
+#define GPIO_OSPEEDER_OSPEEDR7_0 GPIO_OSPEEDR_OSPEEDR7_0
+#define GPIO_OSPEEDER_OSPEEDR7_1 GPIO_OSPEEDR_OSPEEDR7_1
+#define GPIO_OSPEEDER_OSPEEDR8 GPIO_OSPEEDR_OSPEEDR8
+#define GPIO_OSPEEDER_OSPEEDR8_0 GPIO_OSPEEDR_OSPEEDR8_0
+#define GPIO_OSPEEDER_OSPEEDR8_1 GPIO_OSPEEDR_OSPEEDR8_1
+#define GPIO_OSPEEDER_OSPEEDR9 GPIO_OSPEEDR_OSPEEDR9
+#define GPIO_OSPEEDER_OSPEEDR9_0 GPIO_OSPEEDR_OSPEEDR9_0
+#define GPIO_OSPEEDER_OSPEEDR9_1 GPIO_OSPEEDR_OSPEEDR9_1
+#define GPIO_OSPEEDER_OSPEEDR10 GPIO_OSPEEDR_OSPEEDR10
+#define GPIO_OSPEEDER_OSPEEDR10_0 GPIO_OSPEEDR_OSPEEDR10_0
+#define GPIO_OSPEEDER_OSPEEDR10_1 GPIO_OSPEEDR_OSPEEDR10_1
+#define GPIO_OSPEEDER_OSPEEDR11 GPIO_OSPEEDR_OSPEEDR11
+#define GPIO_OSPEEDER_OSPEEDR11_0 GPIO_OSPEEDR_OSPEEDR11_0
+#define GPIO_OSPEEDER_OSPEEDR11_1 GPIO_OSPEEDR_OSPEEDR11_1
+#define GPIO_OSPEEDER_OSPEEDR12 GPIO_OSPEEDR_OSPEEDR12
+#define GPIO_OSPEEDER_OSPEEDR12_0 GPIO_OSPEEDR_OSPEEDR12_0
+#define GPIO_OSPEEDER_OSPEEDR12_1 GPIO_OSPEEDR_OSPEEDR12_1
+#define GPIO_OSPEEDER_OSPEEDR13 GPIO_OSPEEDR_OSPEEDR13
+#define GPIO_OSPEEDER_OSPEEDR13_0 GPIO_OSPEEDR_OSPEEDR13_0
+#define GPIO_OSPEEDER_OSPEEDR13_1 GPIO_OSPEEDR_OSPEEDR13_1
+#define GPIO_OSPEEDER_OSPEEDR14 GPIO_OSPEEDR_OSPEEDR14
+#define GPIO_OSPEEDER_OSPEEDR14_0 GPIO_OSPEEDR_OSPEEDR14_0
+#define GPIO_OSPEEDER_OSPEEDR14_1 GPIO_OSPEEDR_OSPEEDR14_1
+#define GPIO_OSPEEDER_OSPEEDR15 GPIO_OSPEEDR_OSPEEDR15
+#define GPIO_OSPEEDER_OSPEEDR15_0 GPIO_OSPEEDR_OSPEEDR15_0
+#define GPIO_OSPEEDER_OSPEEDR15_1 GPIO_OSPEEDR_OSPEEDR15_1
+
+/******************* Bit definition for GPIO_PUPDR register ******************/
+#define GPIO_PUPDR_PUPDR0 ((uint32_t)0x00000003)
+#define GPIO_PUPDR_PUPDR0_0 ((uint32_t)0x00000001)
+#define GPIO_PUPDR_PUPDR0_1 ((uint32_t)0x00000002)
+#define GPIO_PUPDR_PUPDR1 ((uint32_t)0x0000000C)
+#define GPIO_PUPDR_PUPDR1_0 ((uint32_t)0x00000004)
+#define GPIO_PUPDR_PUPDR1_1 ((uint32_t)0x00000008)
+#define GPIO_PUPDR_PUPDR2 ((uint32_t)0x00000030)
+#define GPIO_PUPDR_PUPDR2_0 ((uint32_t)0x00000010)
+#define GPIO_PUPDR_PUPDR2_1 ((uint32_t)0x00000020)
+#define GPIO_PUPDR_PUPDR3 ((uint32_t)0x000000C0)
+#define GPIO_PUPDR_PUPDR3_0 ((uint32_t)0x00000040)
+#define GPIO_PUPDR_PUPDR3_1 ((uint32_t)0x00000080)
+#define GPIO_PUPDR_PUPDR4 ((uint32_t)0x00000300)
+#define GPIO_PUPDR_PUPDR4_0 ((uint32_t)0x00000100)
+#define GPIO_PUPDR_PUPDR4_1 ((uint32_t)0x00000200)
+#define GPIO_PUPDR_PUPDR5 ((uint32_t)0x00000C00)
+#define GPIO_PUPDR_PUPDR5_0 ((uint32_t)0x00000400)
+#define GPIO_PUPDR_PUPDR5_1 ((uint32_t)0x00000800)
+#define GPIO_PUPDR_PUPDR6 ((uint32_t)0x00003000)
+#define GPIO_PUPDR_PUPDR6_0 ((uint32_t)0x00001000)
+#define GPIO_PUPDR_PUPDR6_1 ((uint32_t)0x00002000)
+#define GPIO_PUPDR_PUPDR7 ((uint32_t)0x0000C000)
+#define GPIO_PUPDR_PUPDR7_0 ((uint32_t)0x00004000)
+#define GPIO_PUPDR_PUPDR7_1 ((uint32_t)0x00008000)
+#define GPIO_PUPDR_PUPDR8 ((uint32_t)0x00030000)
+#define GPIO_PUPDR_PUPDR8_0 ((uint32_t)0x00010000)
+#define GPIO_PUPDR_PUPDR8_1 ((uint32_t)0x00020000)
+#define GPIO_PUPDR_PUPDR9 ((uint32_t)0x000C0000)
+#define GPIO_PUPDR_PUPDR9_0 ((uint32_t)0x00040000)
+#define GPIO_PUPDR_PUPDR9_1 ((uint32_t)0x00080000)
+#define GPIO_PUPDR_PUPDR10 ((uint32_t)0x00300000)
+#define GPIO_PUPDR_PUPDR10_0 ((uint32_t)0x00100000)
+#define GPIO_PUPDR_PUPDR10_1 ((uint32_t)0x00200000)
+#define GPIO_PUPDR_PUPDR11 ((uint32_t)0x00C00000)
+#define GPIO_PUPDR_PUPDR11_0 ((uint32_t)0x00400000)
+#define GPIO_PUPDR_PUPDR11_1 ((uint32_t)0x00800000)
+#define GPIO_PUPDR_PUPDR12 ((uint32_t)0x03000000)
+#define GPIO_PUPDR_PUPDR12_0 ((uint32_t)0x01000000)
+#define GPIO_PUPDR_PUPDR12_1 ((uint32_t)0x02000000)
+#define GPIO_PUPDR_PUPDR13 ((uint32_t)0x0C000000)
+#define GPIO_PUPDR_PUPDR13_0 ((uint32_t)0x04000000)
+#define GPIO_PUPDR_PUPDR13_1 ((uint32_t)0x08000000)
+#define GPIO_PUPDR_PUPDR14 ((uint32_t)0x30000000)
+#define GPIO_PUPDR_PUPDR14_0 ((uint32_t)0x10000000)
+#define GPIO_PUPDR_PUPDR14_1 ((uint32_t)0x20000000)
+#define GPIO_PUPDR_PUPDR15 ((uint32_t)0xC0000000)
+#define GPIO_PUPDR_PUPDR15_0 ((uint32_t)0x40000000)
+#define GPIO_PUPDR_PUPDR15_1 ((uint32_t)0x80000000)
+
+/******************* Bit definition for GPIO_IDR register *******************/
+#define GPIO_IDR_0 ((uint32_t)0x00000001)
+#define GPIO_IDR_1 ((uint32_t)0x00000002)
+#define GPIO_IDR_2 ((uint32_t)0x00000004)
+#define GPIO_IDR_3 ((uint32_t)0x00000008)
+#define GPIO_IDR_4 ((uint32_t)0x00000010)
+#define GPIO_IDR_5 ((uint32_t)0x00000020)
+#define GPIO_IDR_6 ((uint32_t)0x00000040)
+#define GPIO_IDR_7 ((uint32_t)0x00000080)
+#define GPIO_IDR_8 ((uint32_t)0x00000100)
+#define GPIO_IDR_9 ((uint32_t)0x00000200)
+#define GPIO_IDR_10 ((uint32_t)0x00000400)
+#define GPIO_IDR_11 ((uint32_t)0x00000800)
+#define GPIO_IDR_12 ((uint32_t)0x00001000)
+#define GPIO_IDR_13 ((uint32_t)0x00002000)
+#define GPIO_IDR_14 ((uint32_t)0x00004000)
+#define GPIO_IDR_15 ((uint32_t)0x00008000)
+
+/****************** Bit definition for GPIO_ODR register ********************/
+#define GPIO_ODR_0 ((uint32_t)0x00000001)
+#define GPIO_ODR_1 ((uint32_t)0x00000002)
+#define GPIO_ODR_2 ((uint32_t)0x00000004)
+#define GPIO_ODR_3 ((uint32_t)0x00000008)
+#define GPIO_ODR_4 ((uint32_t)0x00000010)
+#define GPIO_ODR_5 ((uint32_t)0x00000020)
+#define GPIO_ODR_6 ((uint32_t)0x00000040)
+#define GPIO_ODR_7 ((uint32_t)0x00000080)
+#define GPIO_ODR_8 ((uint32_t)0x00000100)
+#define GPIO_ODR_9 ((uint32_t)0x00000200)
+#define GPIO_ODR_10 ((uint32_t)0x00000400)
+#define GPIO_ODR_11 ((uint32_t)0x00000800)
+#define GPIO_ODR_12 ((uint32_t)0x00001000)
+#define GPIO_ODR_13 ((uint32_t)0x00002000)
+#define GPIO_ODR_14 ((uint32_t)0x00004000)
+#define GPIO_ODR_15 ((uint32_t)0x00008000)
+
+/****************** Bit definition for GPIO_BSRR register ********************/
+#define GPIO_BSRR_BS_0 ((uint32_t)0x00000001)
+#define GPIO_BSRR_BS_1 ((uint32_t)0x00000002)
+#define GPIO_BSRR_BS_2 ((uint32_t)0x00000004)
+#define GPIO_BSRR_BS_3 ((uint32_t)0x00000008)
+#define GPIO_BSRR_BS_4 ((uint32_t)0x00000010)
+#define GPIO_BSRR_BS_5 ((uint32_t)0x00000020)
+#define GPIO_BSRR_BS_6 ((uint32_t)0x00000040)
+#define GPIO_BSRR_BS_7 ((uint32_t)0x00000080)
+#define GPIO_BSRR_BS_8 ((uint32_t)0x00000100)
+#define GPIO_BSRR_BS_9 ((uint32_t)0x00000200)
+#define GPIO_BSRR_BS_10 ((uint32_t)0x00000400)
+#define GPIO_BSRR_BS_11 ((uint32_t)0x00000800)
+#define GPIO_BSRR_BS_12 ((uint32_t)0x00001000)
+#define GPIO_BSRR_BS_13 ((uint32_t)0x00002000)
+#define GPIO_BSRR_BS_14 ((uint32_t)0x00004000)
+#define GPIO_BSRR_BS_15 ((uint32_t)0x00008000)
+#define GPIO_BSRR_BR_0 ((uint32_t)0x00010000)
+#define GPIO_BSRR_BR_1 ((uint32_t)0x00020000)
+#define GPIO_BSRR_BR_2 ((uint32_t)0x00040000)
+#define GPIO_BSRR_BR_3 ((uint32_t)0x00080000)
+#define GPIO_BSRR_BR_4 ((uint32_t)0x00100000)
+#define GPIO_BSRR_BR_5 ((uint32_t)0x00200000)
+#define GPIO_BSRR_BR_6 ((uint32_t)0x00400000)
+#define GPIO_BSRR_BR_7 ((uint32_t)0x00800000)
+#define GPIO_BSRR_BR_8 ((uint32_t)0x01000000)
+#define GPIO_BSRR_BR_9 ((uint32_t)0x02000000)
+#define GPIO_BSRR_BR_10 ((uint32_t)0x04000000)
+#define GPIO_BSRR_BR_11 ((uint32_t)0x08000000)
+#define GPIO_BSRR_BR_12 ((uint32_t)0x10000000)
+#define GPIO_BSRR_BR_13 ((uint32_t)0x20000000)
+#define GPIO_BSRR_BR_14 ((uint32_t)0x40000000)
+#define GPIO_BSRR_BR_15 ((uint32_t)0x80000000)
+
+/****************** Bit definition for GPIO_LCKR register ********************/
+#define GPIO_LCKR_LCK0 ((uint32_t)0x00000001)
+#define GPIO_LCKR_LCK1 ((uint32_t)0x00000002)
+#define GPIO_LCKR_LCK2 ((uint32_t)0x00000004)
+#define GPIO_LCKR_LCK3 ((uint32_t)0x00000008)
+#define GPIO_LCKR_LCK4 ((uint32_t)0x00000010)
+#define GPIO_LCKR_LCK5 ((uint32_t)0x00000020)
+#define GPIO_LCKR_LCK6 ((uint32_t)0x00000040)
+#define GPIO_LCKR_LCK7 ((uint32_t)0x00000080)
+#define GPIO_LCKR_LCK8 ((uint32_t)0x00000100)
+#define GPIO_LCKR_LCK9 ((uint32_t)0x00000200)
+#define GPIO_LCKR_LCK10 ((uint32_t)0x00000400)
+#define GPIO_LCKR_LCK11 ((uint32_t)0x00000800)
+#define GPIO_LCKR_LCK12 ((uint32_t)0x00001000)
+#define GPIO_LCKR_LCK13 ((uint32_t)0x00002000)
+#define GPIO_LCKR_LCK14 ((uint32_t)0x00004000)
+#define GPIO_LCKR_LCK15 ((uint32_t)0x00008000)
+#define GPIO_LCKR_LCKK ((uint32_t)0x00010000)
+
+/****************** Bit definition for GPIO_AFRL register ********************/
+#define GPIO_AFRL_AFRL0 ((uint32_t)0x0000000F)
+#define GPIO_AFRL_AFRL1 ((uint32_t)0x000000F0)
+#define GPIO_AFRL_AFRL2 ((uint32_t)0x00000F00)
+#define GPIO_AFRL_AFRL3 ((uint32_t)0x0000F000)
+#define GPIO_AFRL_AFRL4 ((uint32_t)0x000F0000)
+#define GPIO_AFRL_AFRL5 ((uint32_t)0x00F00000)
+#define GPIO_AFRL_AFRL6 ((uint32_t)0x0F000000)
+#define GPIO_AFRL_AFRL7 ((uint32_t)0xF0000000)
+
+/****************** Bit definition for GPIO_AFRH register ********************/
+#define GPIO_AFRH_AFRH0 ((uint32_t)0x0000000F)
+#define GPIO_AFRH_AFRH1 ((uint32_t)0x000000F0)
+#define GPIO_AFRH_AFRH2 ((uint32_t)0x00000F00)
+#define GPIO_AFRH_AFRH3 ((uint32_t)0x0000F000)
+#define GPIO_AFRH_AFRH4 ((uint32_t)0x000F0000)
+#define GPIO_AFRH_AFRH5 ((uint32_t)0x00F00000)
+#define GPIO_AFRH_AFRH6 ((uint32_t)0x0F000000)
+#define GPIO_AFRH_AFRH7 ((uint32_t)0xF0000000)
+
+/****************** Bit definition for GPIO_BRR register *********************/
+#define GPIO_BRR_BR_0 ((uint32_t)0x00000001)
+#define GPIO_BRR_BR_1 ((uint32_t)0x00000002)
+#define GPIO_BRR_BR_2 ((uint32_t)0x00000004)
+#define GPIO_BRR_BR_3 ((uint32_t)0x00000008)
+#define GPIO_BRR_BR_4 ((uint32_t)0x00000010)
+#define GPIO_BRR_BR_5 ((uint32_t)0x00000020)
+#define GPIO_BRR_BR_6 ((uint32_t)0x00000040)
+#define GPIO_BRR_BR_7 ((uint32_t)0x00000080)
+#define GPIO_BRR_BR_8 ((uint32_t)0x00000100)
+#define GPIO_BRR_BR_9 ((uint32_t)0x00000200)
+#define GPIO_BRR_BR_10 ((uint32_t)0x00000400)
+#define GPIO_BRR_BR_11 ((uint32_t)0x00000800)
+#define GPIO_BRR_BR_12 ((uint32_t)0x00001000)
+#define GPIO_BRR_BR_13 ((uint32_t)0x00002000)
+#define GPIO_BRR_BR_14 ((uint32_t)0x00004000)
+#define GPIO_BRR_BR_15 ((uint32_t)0x00008000)
+
+/******************************************************************************/
+/* */
+/* Inter-integrated Circuit Interface (I2C) */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for I2C_CR1 register *******************/
+#define I2C_CR1_PE ((uint32_t)0x00000001) /*!< Peripheral enable */
+#define I2C_CR1_TXIE ((uint32_t)0x00000002) /*!< TX interrupt enable */
+#define I2C_CR1_RXIE ((uint32_t)0x00000004) /*!< RX interrupt enable */
+#define I2C_CR1_ADDRIE ((uint32_t)0x00000008) /*!< Address match interrupt enable */
+#define I2C_CR1_NACKIE ((uint32_t)0x00000010) /*!< NACK received interrupt enable */
+#define I2C_CR1_STOPIE ((uint32_t)0x00000020) /*!< STOP detection interrupt enable */
+#define I2C_CR1_TCIE ((uint32_t)0x00000040) /*!< Transfer complete interrupt enable */
+#define I2C_CR1_ERRIE ((uint32_t)0x00000080) /*!< Errors interrupt enable */
+#define I2C_CR1_DFN ((uint32_t)0x00000F00) /*!< Digital noise filter */
+#define I2C_CR1_ANFOFF ((uint32_t)0x00001000) /*!< Analog noise filter OFF */
+#define I2C_CR1_SWRST ((uint32_t)0x00002000) /*!< Software reset */
+#define I2C_CR1_TXDMAEN ((uint32_t)0x00004000) /*!< DMA transmission requests enable */
+#define I2C_CR1_RXDMAEN ((uint32_t)0x00008000) /*!< DMA reception requests enable */
+#define I2C_CR1_SBC ((uint32_t)0x00010000) /*!< Slave byte control */
+#define I2C_CR1_NOSTRETCH ((uint32_t)0x00020000) /*!< Clock stretching disable */
+#define I2C_CR1_WUPEN ((uint32_t)0x00040000) /*!< Wakeup from STOP enable */
+#define I2C_CR1_GCEN ((uint32_t)0x00080000) /*!< General call enable */
+#define I2C_CR1_SMBHEN ((uint32_t)0x00100000) /*!< SMBus host address enable */
+#define I2C_CR1_SMBDEN ((uint32_t)0x00200000) /*!< SMBus device default address enable */
+#define I2C_CR1_ALERTEN ((uint32_t)0x00400000) /*!< SMBus alert enable */
+#define I2C_CR1_PECEN ((uint32_t)0x00800000) /*!< PEC enable */
+
+/****************** Bit definition for I2C_CR2 register ********************/
+#define I2C_CR2_SADD ((uint32_t)0x000003FF) /*!< Slave address (master mode) */
+#define I2C_CR2_RD_WRN ((uint32_t)0x00000400) /*!< Transfer direction (master mode) */
+#define I2C_CR2_ADD10 ((uint32_t)0x00000800) /*!< 10-bit addressing mode (master mode) */
+#define I2C_CR2_HEAD10R ((uint32_t)0x00001000) /*!< 10-bit address header only read direction (master mode) */
+#define I2C_CR2_START ((uint32_t)0x00002000) /*!< START generation */
+#define I2C_CR2_STOP ((uint32_t)0x00004000) /*!< STOP generation (master mode) */
+#define I2C_CR2_NACK ((uint32_t)0x00008000) /*!< NACK generation (slave mode) */
+#define I2C_CR2_NBYTES ((uint32_t)0x00FF0000) /*!< Number of bytes */
+#define I2C_CR2_RELOAD ((uint32_t)0x01000000) /*!< NBYTES reload mode */
+#define I2C_CR2_AUTOEND ((uint32_t)0x02000000) /*!< Automatic end mode (master mode) */
+#define I2C_CR2_PECBYTE ((uint32_t)0x04000000) /*!< Packet error checking byte */
+
+/******************* Bit definition for I2C_OAR1 register ******************/
+#define I2C_OAR1_OA1 ((uint32_t)0x000003FF) /*!< Interface own address 1 */
+#define I2C_OAR1_OA1MODE ((uint32_t)0x00000400) /*!< Own address 1 10-bit mode */
+#define I2C_OAR1_OA1EN ((uint32_t)0x00008000) /*!< Own address 1 enable */
+
+/******************* Bit definition for I2C_OAR2 register ******************/
+#define I2C_OAR2_OA2 ((uint32_t)0x000000FE) /*!< Interface own address 2 */
+#define I2C_OAR2_OA2MSK ((uint32_t)0x00000700) /*!< Own address 2 masks */
+#define I2C_OAR2_OA2EN ((uint32_t)0x00008000) /*!< Own address 2 enable */
+
+/******************* Bit definition for I2C_TIMINGR register ****************/
+#define I2C_TIMINGR_SCLL ((uint32_t)0x000000FF) /*!< SCL low period (master mode) */
+#define I2C_TIMINGR_SCLH ((uint32_t)0x0000FF00) /*!< SCL high period (master mode) */
+#define I2C_TIMINGR_SDADEL ((uint32_t)0x000F0000) /*!< Data hold time */
+#define I2C_TIMINGR_SCLDEL ((uint32_t)0x00F00000) /*!< Data setup time */
+#define I2C_TIMINGR_PRESC ((uint32_t)0xF0000000) /*!< Timings prescaler */
+
+/******************* Bit definition for I2C_TIMEOUTR register ****************/
+#define I2C_TIMEOUTR_TIMEOUTA ((uint32_t)0x00000FFF) /*!< Bus timeout A */
+#define I2C_TIMEOUTR_TIDLE ((uint32_t)0x00001000) /*!< Idle clock timeout detection */
+#define I2C_TIMEOUTR_TIMOUTEN ((uint32_t)0x00008000) /*!< Clock timeout enable */
+#define I2C_TIMEOUTR_TIMEOUTB ((uint32_t)0x0FFF0000) /*!< Bus timeout B*/
+#define I2C_TIMEOUTR_TEXTEN ((uint32_t)0x80000000) /*!< Extended clock timeout enable */
+
+/****************** Bit definition for I2C_ISR register ********************/
+#define I2C_ISR_TXE ((uint32_t)0x00000001) /*!< Transmit data register empty */
+#define I2C_ISR_TXIS ((uint32_t)0x00000002) /*!< Transmit interrupt status */
+#define I2C_ISR_RXNE ((uint32_t)0x00000004) /*!< Receive data register not empty */
+#define I2C_ISR_ADDR ((uint32_t)0x00000008) /*!< Address matched (slave mode)*/
+#define I2C_ISR_NACKF ((uint32_t)0x00000010) /*!< NACK received flag */
+#define I2C_ISR_STOPF ((uint32_t)0x00000020) /*!< STOP detection flag */
+#define I2C_ISR_TC ((uint32_t)0x00000040) /*!< Transfer complete (master mode) */
+#define I2C_ISR_TCR ((uint32_t)0x00000080) /*!< Transfer complete reload */
+#define I2C_ISR_BERR ((uint32_t)0x00000100) /*!< Bus error */
+#define I2C_ISR_ARLO ((uint32_t)0x00000200) /*!< Arbitration lost */
+#define I2C_ISR_OVR ((uint32_t)0x00000400) /*!< Overrun/Underrun */
+#define I2C_ISR_PECERR ((uint32_t)0x00000800) /*!< PEC error in reception */
+#define I2C_ISR_TIMEOUT ((uint32_t)0x00001000) /*!< Timeout or Tlow detection flag */
+#define I2C_ISR_ALERT ((uint32_t)0x00002000) /*!< SMBus alert */
+#define I2C_ISR_BUSY ((uint32_t)0x00008000) /*!< Bus busy */
+#define I2C_ISR_DIR ((uint32_t)0x00010000) /*!< Transfer direction (slave mode) */
+#define I2C_ISR_ADDCODE ((uint32_t)0x00FE0000) /*!< Address match code (slave mode) */
+
+/****************** Bit definition for I2C_ICR register ********************/
+#define I2C_ICR_ADDRCF ((uint32_t)0x00000008) /*!< Address matched clear flag */
+#define I2C_ICR_NACKCF ((uint32_t)0x00000010) /*!< NACK clear flag */
+#define I2C_ICR_STOPCF ((uint32_t)0x00000020) /*!< STOP detection clear flag */
+#define I2C_ICR_BERRCF ((uint32_t)0x00000100) /*!< Bus error clear flag */
+#define I2C_ICR_ARLOCF ((uint32_t)0x00000200) /*!< Arbitration lost clear flag */
+#define I2C_ICR_OVRCF ((uint32_t)0x00000400) /*!< Overrun/Underrun clear flag */
+#define I2C_ICR_PECCF ((uint32_t)0x00000800) /*!< PAC error clear flag */
+#define I2C_ICR_TIMOUTCF ((uint32_t)0x00001000) /*!< Timeout clear flag */
+#define I2C_ICR_ALERTCF ((uint32_t)0x00002000) /*!< Alert clear flag */
+
+/****************** Bit definition for I2C_PECR register *******************/
+#define I2C_PECR_PEC ((uint32_t)0x000000FF) /*!< PEC register */
+
+/****************** Bit definition for I2C_RXDR register *********************/
+#define I2C_RXDR_RXDATA ((uint32_t)0x000000FF) /*!< 8-bit receive data */
+
+/****************** Bit definition for I2C_TXDR register *******************/
+#define I2C_TXDR_TXDATA ((uint32_t)0x000000FF) /*!< 8-bit transmit data */
+
+/*****************************************************************************/
+/* */
+/* Independent WATCHDOG (IWDG) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for IWDG_KR register *******************/
+#define IWDG_KR_KEY ((uint32_t)0xFFFF) /*!< Key value (write only, read 0000h) */
+
+/******************* Bit definition for IWDG_PR register *******************/
+#define IWDG_PR_PR ((uint32_t)0x07) /*!< PR[2:0] (Prescaler divider) */
+#define IWDG_PR_PR_0 ((uint32_t)0x01) /*!< Bit 0 */
+#define IWDG_PR_PR_1 ((uint32_t)0x02) /*!< Bit 1 */
+#define IWDG_PR_PR_2 ((uint32_t)0x04) /*!< Bit 2 */
+
+/******************* Bit definition for IWDG_RLR register ******************/
+#define IWDG_RLR_RL ((uint32_t)0x0FFF) /*!< Watchdog counter reload value */
+
+/******************* Bit definition for IWDG_SR register *******************/
+#define IWDG_SR_PVU ((uint32_t)0x01) /*!< Watchdog prescaler value update */
+#define IWDG_SR_RVU ((uint32_t)0x02) /*!< Watchdog counter reload value update */
+#define IWDG_SR_WVU ((uint32_t)0x04) /*!< Watchdog counter window value update */
+
+/******************* Bit definition for IWDG_KR register *******************/
+#define IWDG_WINR_WIN ((uint32_t)0x0FFF) /*!< Watchdog counter window value */
+
+/*****************************************************************************/
+/* */
+/* Power Control (PWR) */
+/* */
+/*****************************************************************************/
+
+/******************** Bit definition for PWR_CR register *******************/
+#define PWR_CR_LPDS ((uint32_t)0x00000001) /*!< Low-power Deepsleep */
+#define PWR_CR_PDDS ((uint32_t)0x00000002) /*!< Power Down Deepsleep */
+#define PWR_CR_CWUF ((uint32_t)0x00000004) /*!< Clear Wakeup Flag */
+#define PWR_CR_CSBF ((uint32_t)0x00000008) /*!< Clear Standby Flag */
+#define PWR_CR_PVDE ((uint32_t)0x00000010) /*!< Power Voltage Detector Enable */
+
+#define PWR_CR_PLS ((uint32_t)0x000000E0) /*!< PLS[2:0] bits (PVD Level Selection) */
+#define PWR_CR_PLS_0 ((uint32_t)0x00000020) /*!< Bit 0 */
+#define PWR_CR_PLS_1 ((uint32_t)0x00000040) /*!< Bit 1 */
+#define PWR_CR_PLS_2 ((uint32_t)0x00000080) /*!< Bit 2 */
+
+/*!< PVD level configuration */
+#define PWR_CR_PLS_LEV0 ((uint32_t)0x00000000) /*!< PVD level 0 */
+#define PWR_CR_PLS_LEV1 ((uint32_t)0x00000020) /*!< PVD level 1 */
+#define PWR_CR_PLS_LEV2 ((uint32_t)0x00000040) /*!< PVD level 2 */
+#define PWR_CR_PLS_LEV3 ((uint32_t)0x00000060) /*!< PVD level 3 */
+#define PWR_CR_PLS_LEV4 ((uint32_t)0x00000080) /*!< PVD level 4 */
+#define PWR_CR_PLS_LEV5 ((uint32_t)0x000000A0) /*!< PVD level 5 */
+#define PWR_CR_PLS_LEV6 ((uint32_t)0x000000C0) /*!< PVD level 6 */
+#define PWR_CR_PLS_LEV7 ((uint32_t)0x000000E0) /*!< PVD level 7 */
+
+#define PWR_CR_DBP ((uint32_t)0x00000100) /*!< Disable Backup Domain write protection */
+
+/******************* Bit definition for PWR_CSR register *******************/
+#define PWR_CSR_WUF ((uint32_t)0x00000001) /*!< Wakeup Flag */
+#define PWR_CSR_SBF ((uint32_t)0x00000002) /*!< Standby Flag */
+#define PWR_CSR_PVDO ((uint32_t)0x00000004) /*!< PVD Output */
+#define PWR_CSR_VREFINTRDYF ((uint32_t)0x00000008) /*!< Internal voltage reference (VREFINT) ready flag */
+
+#define PWR_CSR_EWUP1 ((uint32_t)0x00000100) /*!< Enable WKUP pin 1 */
+#define PWR_CSR_EWUP2 ((uint32_t)0x00000200) /*!< Enable WKUP pin 2 */
+#define PWR_CSR_EWUP3 ((uint32_t)0x00000400) /*!< Enable WKUP pin 3 */
+#define PWR_CSR_EWUP4 ((uint32_t)0x00000800) /*!< Enable WKUP pin 4 */
+#define PWR_CSR_EWUP5 ((uint32_t)0x00001000) /*!< Enable WKUP pin 5 */
+#define PWR_CSR_EWUP6 ((uint32_t)0x00002000) /*!< Enable WKUP pin 6 */
+#define PWR_CSR_EWUP7 ((uint32_t)0x00004000) /*!< Enable WKUP pin 7 */
+#define PWR_CSR_EWUP8 ((uint32_t)0x00008000) /*!< Enable WKUP pin 8 */
+
+/*****************************************************************************/
+/* */
+/* Reset and Clock Control */
+/* */
+/*****************************************************************************/
+
+/******************** Bit definition for RCC_CR register *******************/
+#define RCC_CR_HSION ((uint32_t)0x00000001) /*!< Internal High Speed clock enable */
+#define RCC_CR_HSIRDY ((uint32_t)0x00000002) /*!< Internal High Speed clock ready flag */
+
+#define RCC_CR_HSITRIM ((uint32_t)0x000000F8) /*!< Internal High Speed clock trimming */
+#define RCC_CR_HSITRIM_0 ((uint32_t)0x00000008) /*!<Bit 0 */
+#define RCC_CR_HSITRIM_1 ((uint32_t)0x00000010) /*!<Bit 1 */
+#define RCC_CR_HSITRIM_2 ((uint32_t)0x00000020) /*!<Bit 2 */
+#define RCC_CR_HSITRIM_3 ((uint32_t)0x00000040) /*!<Bit 3 */
+#define RCC_CR_HSITRIM_4 ((uint32_t)0x00000080) /*!<Bit 4 */
+
+#define RCC_CR_HSICAL ((uint32_t)0x0000FF00) /*!< Internal High Speed clock Calibration */
+#define RCC_CR_HSICAL_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define RCC_CR_HSICAL_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define RCC_CR_HSICAL_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define RCC_CR_HSICAL_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define RCC_CR_HSICAL_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+#define RCC_CR_HSICAL_5 ((uint32_t)0x00002000) /*!<Bit 5 */
+#define RCC_CR_HSICAL_6 ((uint32_t)0x00004000) /*!<Bit 6 */
+#define RCC_CR_HSICAL_7 ((uint32_t)0x00008000) /*!<Bit 7 */
+
+#define RCC_CR_HSEON ((uint32_t)0x00010000) /*!< External High Speed clock enable */
+#define RCC_CR_HSERDY ((uint32_t)0x00020000) /*!< External High Speed clock ready flag */
+#define RCC_CR_HSEBYP ((uint32_t)0x00040000) /*!< External High Speed clock Bypass */
+#define RCC_CR_CSSON ((uint32_t)0x00080000) /*!< Clock Security System enable */
+#define RCC_CR_PLLON ((uint32_t)0x01000000) /*!< PLL enable */
+#define RCC_CR_PLLRDY ((uint32_t)0x02000000) /*!< PLL clock ready flag */
+
+/******************** Bit definition for RCC_CFGR register *****************/
+/*!< SW configuration */
+#define RCC_CFGR_SW ((uint32_t)0x00000003) /*!< SW[1:0] bits (System clock Switch) */
+#define RCC_CFGR_SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR_SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+#define RCC_CFGR_SW_HSI ((uint32_t)0x00000000) /*!< HSI selected as system clock */
+#define RCC_CFGR_SW_HSE ((uint32_t)0x00000001) /*!< HSE selected as system clock */
+#define RCC_CFGR_SW_PLL ((uint32_t)0x00000002) /*!< PLL selected as system clock */
+#define RCC_CFGR_SW_HSI48 ((uint32_t)0x00000003) /*!< HSI48 selected as system clock */
+
+/*!< SWS configuration */
+#define RCC_CFGR_SWS ((uint32_t)0x0000000C) /*!< SWS[1:0] bits (System Clock Switch Status) */
+#define RCC_CFGR_SWS_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define RCC_CFGR_SWS_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+
+#define RCC_CFGR_SWS_HSI ((uint32_t)0x00000000) /*!< HSI oscillator used as system clock */
+#define RCC_CFGR_SWS_HSE ((uint32_t)0x00000004) /*!< HSE oscillator used as system clock */
+#define RCC_CFGR_SWS_PLL ((uint32_t)0x00000008) /*!< PLL used as system clock */
+#define RCC_CFGR_SWS_HSI48 ((uint32_t)0x0000000C) /*!< HSI48 oscillator used as system clock */
+
+/*!< HPRE configuration */
+#define RCC_CFGR_HPRE ((uint32_t)0x000000F0) /*!< HPRE[3:0] bits (AHB prescaler) */
+#define RCC_CFGR_HPRE_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define RCC_CFGR_HPRE_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define RCC_CFGR_HPRE_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+#define RCC_CFGR_HPRE_3 ((uint32_t)0x00000080) /*!< Bit 3 */
+
+#define RCC_CFGR_HPRE_DIV1 ((uint32_t)0x00000000) /*!< SYSCLK not divided */
+#define RCC_CFGR_HPRE_DIV2 ((uint32_t)0x00000080) /*!< SYSCLK divided by 2 */
+#define RCC_CFGR_HPRE_DIV4 ((uint32_t)0x00000090) /*!< SYSCLK divided by 4 */
+#define RCC_CFGR_HPRE_DIV8 ((uint32_t)0x000000A0) /*!< SYSCLK divided by 8 */
+#define RCC_CFGR_HPRE_DIV16 ((uint32_t)0x000000B0) /*!< SYSCLK divided by 16 */
+#define RCC_CFGR_HPRE_DIV64 ((uint32_t)0x000000C0) /*!< SYSCLK divided by 64 */
+#define RCC_CFGR_HPRE_DIV128 ((uint32_t)0x000000D0) /*!< SYSCLK divided by 128 */
+#define RCC_CFGR_HPRE_DIV256 ((uint32_t)0x000000E0) /*!< SYSCLK divided by 256 */
+#define RCC_CFGR_HPRE_DIV512 ((uint32_t)0x000000F0) /*!< SYSCLK divided by 512 */
+
+/*!< PPRE configuration */
+#define RCC_CFGR_PPRE ((uint32_t)0x00000700) /*!< PRE[2:0] bits (APB prescaler) */
+#define RCC_CFGR_PPRE_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define RCC_CFGR_PPRE_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define RCC_CFGR_PPRE_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+
+#define RCC_CFGR_PPRE_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */
+#define RCC_CFGR_PPRE_DIV2 ((uint32_t)0x00000400) /*!< HCLK divided by 2 */
+#define RCC_CFGR_PPRE_DIV4 ((uint32_t)0x00000500) /*!< HCLK divided by 4 */
+#define RCC_CFGR_PPRE_DIV8 ((uint32_t)0x00000600) /*!< HCLK divided by 8 */
+#define RCC_CFGR_PPRE_DIV16 ((uint32_t)0x00000700) /*!< HCLK divided by 16 */
+
+/*!< ADCPPRE configuration */
+#define RCC_CFGR_ADCPRE ((uint32_t)0x00004000) /*!< ADCPRE bit (ADC prescaler) */
+
+#define RCC_CFGR_ADCPRE_DIV2 ((uint32_t)0x00000000) /*!< PCLK divided by 2 */
+#define RCC_CFGR_ADCPRE_DIV4 ((uint32_t)0x00004000) /*!< PCLK divided by 4 */
+
+#define RCC_CFGR_PLLSRC ((uint32_t)0x00018000) /*!< PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSI_DIV2 ((uint32_t)0x00000000) /*!< HSI clock divided by 2 selected as PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSI_PREDIV ((uint32_t)0x00008000) /*!< HSI/PREDIV clock selected as PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSE_PREDIV ((uint32_t)0x00010000) /*!< HSE/PREDIV clock selected as PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSI48_PREDIV ((uint32_t)0x00018000) /*!< HSI48/PREDIV clock selected as PLL entry clock source */
+
+#define RCC_CFGR_PLLXTPRE ((uint32_t)0x00020000) /*!< HSE divider for PLL entry */
+#define RCC_CFGR_PLLXTPRE_HSE_PREDIV_DIV1 ((uint32_t)0x00000000) /*!< HSE/PREDIV clock not divided for PLL entry */
+#define RCC_CFGR_PLLXTPRE_HSE_PREDIV_DIV2 ((uint32_t)0x00020000) /*!< HSE/PREDIV clock divided by 2 for PLL entry */
+
+/*!< PLLMUL configuration */
+#define RCC_CFGR_PLLMUL ((uint32_t)0x003C0000) /*!< PLLMUL[3:0] bits (PLL multiplication factor) */
+#define RCC_CFGR_PLLMUL_0 ((uint32_t)0x00040000) /*!< Bit 0 */
+#define RCC_CFGR_PLLMUL_1 ((uint32_t)0x00080000) /*!< Bit 1 */
+#define RCC_CFGR_PLLMUL_2 ((uint32_t)0x00100000) /*!< Bit 2 */
+#define RCC_CFGR_PLLMUL_3 ((uint32_t)0x00200000) /*!< Bit 3 */
+
+#define RCC_CFGR_PLLMUL2 ((uint32_t)0x00000000) /*!< PLL input clock*2 */
+#define RCC_CFGR_PLLMUL3 ((uint32_t)0x00040000) /*!< PLL input clock*3 */
+#define RCC_CFGR_PLLMUL4 ((uint32_t)0x00080000) /*!< PLL input clock*4 */
+#define RCC_CFGR_PLLMUL5 ((uint32_t)0x000C0000) /*!< PLL input clock*5 */
+#define RCC_CFGR_PLLMUL6 ((uint32_t)0x00100000) /*!< PLL input clock*6 */
+#define RCC_CFGR_PLLMUL7 ((uint32_t)0x00140000) /*!< PLL input clock*7 */
+#define RCC_CFGR_PLLMUL8 ((uint32_t)0x00180000) /*!< PLL input clock*8 */
+#define RCC_CFGR_PLLMUL9 ((uint32_t)0x001C0000) /*!< PLL input clock*9 */
+#define RCC_CFGR_PLLMUL10 ((uint32_t)0x00200000) /*!< PLL input clock10 */
+#define RCC_CFGR_PLLMUL11 ((uint32_t)0x00240000) /*!< PLL input clock*11 */
+#define RCC_CFGR_PLLMUL12 ((uint32_t)0x00280000) /*!< PLL input clock*12 */
+#define RCC_CFGR_PLLMUL13 ((uint32_t)0x002C0000) /*!< PLL input clock*13 */
+#define RCC_CFGR_PLLMUL14 ((uint32_t)0x00300000) /*!< PLL input clock*14 */
+#define RCC_CFGR_PLLMUL15 ((uint32_t)0x00340000) /*!< PLL input clock*15 */
+#define RCC_CFGR_PLLMUL16 ((uint32_t)0x00380000) /*!< PLL input clock*16 */
+
+/*!< MCO configuration */
+#define RCC_CFGR_MCO ((uint32_t)0x0F000000) /*!< MCO[3:0] bits (Microcontroller Clock Output) */
+#define RCC_CFGR_MCO_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define RCC_CFGR_MCO_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define RCC_CFGR_MCO_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+#define RCC_CFGR_MCO_3 ((uint32_t)0x08000000) /*!< Bit 3 */
+
+#define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
+#define RCC_CFGR_MCO_HSI14 ((uint32_t)0x01000000) /*!< HSI14 clock selected as MCO source */
+#define RCC_CFGR_MCO_LSI ((uint32_t)0x02000000) /*!< LSI clock selected as MCO source */
+#define RCC_CFGR_MCO_LSE ((uint32_t)0x03000000) /*!< LSE clock selected as MCO source */
+#define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x04000000) /*!< System clock selected as MCO source */
+#define RCC_CFGR_MCO_HSI ((uint32_t)0x05000000) /*!< HSI clock selected as MCO source */
+#define RCC_CFGR_MCO_HSE ((uint32_t)0x06000000) /*!< HSE clock selected as MCO source */
+#define RCC_CFGR_MCO_PLL ((uint32_t)0x07000000) /*!< PLL clock divided by 2 selected as MCO source */
+#define RCC_CFGR_MCO_HSI48 ((uint32_t)0x08000000) /*!< HSI48 clock selected as MCO source */
+
+#define RCC_CFGR_MCOPRE ((uint32_t)0x70000000) /*!< MCO prescaler */
+#define RCC_CFGR_MCOPRE_DIV1 ((uint32_t)0x00000000) /*!< MCO is divided by 1 */
+#define RCC_CFGR_MCOPRE_DIV2 ((uint32_t)0x10000000) /*!< MCO is divided by 2 */
+#define RCC_CFGR_MCOPRE_DIV4 ((uint32_t)0x20000000) /*!< MCO is divided by 4 */
+#define RCC_CFGR_MCOPRE_DIV8 ((uint32_t)0x30000000) /*!< MCO is divided by 8 */
+#define RCC_CFGR_MCOPRE_DIV16 ((uint32_t)0x40000000) /*!< MCO is divided by 16 */
+#define RCC_CFGR_MCOPRE_DIV32 ((uint32_t)0x50000000) /*!< MCO is divided by 32 */
+#define RCC_CFGR_MCOPRE_DIV64 ((uint32_t)0x60000000) /*!< MCO is divided by 64 */
+#define RCC_CFGR_MCOPRE_DIV128 ((uint32_t)0x70000000) /*!< MCO is divided by 128 */
+
+#define RCC_CFGR_PLLNODIV ((uint32_t)0x80000000) /*!< PLL is not divided to MCO */
+
+/*!<****************** Bit definition for RCC_CIR register *****************/
+#define RCC_CIR_LSIRDYF ((uint32_t)0x00000001) /*!< LSI Ready Interrupt flag */
+#define RCC_CIR_LSERDYF ((uint32_t)0x00000002) /*!< LSE Ready Interrupt flag */
+#define RCC_CIR_HSIRDYF ((uint32_t)0x00000004) /*!< HSI Ready Interrupt flag */
+#define RCC_CIR_HSERDYF ((uint32_t)0x00000008) /*!< HSE Ready Interrupt flag */
+#define RCC_CIR_PLLRDYF ((uint32_t)0x00000010) /*!< PLL Ready Interrupt flag */
+#define RCC_CIR_HSI14RDYF ((uint32_t)0x00000020) /*!< HSI14 Ready Interrupt flag */
+#define RCC_CIR_HSI48RDYF ((uint32_t)0x00000040) /*!< HSI48 Ready Interrupt flag */
+#define RCC_CIR_CSSF ((uint32_t)0x00000080) /*!< Clock Security System Interrupt flag */
+#define RCC_CIR_LSIRDYIE ((uint32_t)0x00000100) /*!< LSI Ready Interrupt Enable */
+#define RCC_CIR_LSERDYIE ((uint32_t)0x00000200) /*!< LSE Ready Interrupt Enable */
+#define RCC_CIR_HSIRDYIE ((uint32_t)0x00000400) /*!< HSI Ready Interrupt Enable */
+#define RCC_CIR_HSERDYIE ((uint32_t)0x00000800) /*!< HSE Ready Interrupt Enable */
+#define RCC_CIR_PLLRDYIE ((uint32_t)0x00001000) /*!< PLL Ready Interrupt Enable */
+#define RCC_CIR_HSI14RDYIE ((uint32_t)0x00002000) /*!< HSI14 Ready Interrupt Enable */
+#define RCC_CIR_HSI48RDYIE ((uint32_t)0x00004000) /*!< HSI48 Ready Interrupt Enable */
+#define RCC_CIR_LSIRDYC ((uint32_t)0x00010000) /*!< LSI Ready Interrupt Clear */
+#define RCC_CIR_LSERDYC ((uint32_t)0x00020000) /*!< LSE Ready Interrupt Clear */
+#define RCC_CIR_HSIRDYC ((uint32_t)0x00040000) /*!< HSI Ready Interrupt Clear */
+#define RCC_CIR_HSERDYC ((uint32_t)0x00080000) /*!< HSE Ready Interrupt Clear */
+#define RCC_CIR_PLLRDYC ((uint32_t)0x00100000) /*!< PLL Ready Interrupt Clear */
+#define RCC_CIR_HSI14RDYC ((uint32_t)0x00200000) /*!< HSI14 Ready Interrupt Clear */
+#define RCC_CIR_HSI48RDYC ((uint32_t)0x00400000) /*!< HSI48 Ready Interrupt Clear */
+#define RCC_CIR_CSSC ((uint32_t)0x00800000) /*!< Clock Security System Interrupt Clear */
+
+/***************** Bit definition for RCC_APB2RSTR register ****************/
+#define RCC_APB2RSTR_SYSCFGRST ((uint32_t)0x00000001) /*!< SYSCFG clock reset */
+#define RCC_APB2RSTR_ADCRST ((uint32_t)0x00000200) /*!< ADC clock reset */
+#define RCC_APB2RSTR_TIM1RST ((uint32_t)0x00000800) /*!< TIM1 clock reset */
+#define RCC_APB2RSTR_SPI1RST ((uint32_t)0x00001000) /*!< SPI1 clock reset */
+#define RCC_APB2RSTR_USART1RST ((uint32_t)0x00004000) /*!< USART1 clock reset */
+#define RCC_APB2RSTR_TIM15RST ((uint32_t)0x00010000) /*!< TIM15 clock reset */
+#define RCC_APB2RSTR_TIM16RST ((uint32_t)0x00020000) /*!< TIM16 clock reset */
+#define RCC_APB2RSTR_TIM17RST ((uint32_t)0x00040000) /*!< TIM17 clock reset */
+#define RCC_APB2RSTR_DBGMCURST ((uint32_t)0x00400000) /*!< DBGMCU clock reset */
+
+/*!< Old ADC1 clock reset bit definition maintained for legacy purpose */
+#define RCC_APB2RSTR_ADC1RST RCC_APB2RSTR_ADCRST
+
+/***************** Bit definition for RCC_APB1RSTR register ****************/
+#define RCC_APB1RSTR_TIM2RST ((uint32_t)0x00000001) /*!< Timer 2 clock reset */
+#define RCC_APB1RSTR_TIM3RST ((uint32_t)0x00000002) /*!< Timer 3 clock reset */
+#define RCC_APB1RSTR_TIM6RST ((uint32_t)0x00000010) /*!< Timer 6 clock reset */
+#define RCC_APB1RSTR_TIM7RST ((uint32_t)0x00000020) /*!< Timer 7 clock reset */
+#define RCC_APB1RSTR_TIM14RST ((uint32_t)0x00000100) /*!< Timer 14 clock reset */
+#define RCC_APB1RSTR_WWDGRST ((uint32_t)0x00000800) /*!< Window Watchdog clock reset */
+#define RCC_APB1RSTR_SPI2RST ((uint32_t)0x00004000) /*!< SPI2 clock reset */
+#define RCC_APB1RSTR_USART2RST ((uint32_t)0x00020000) /*!< USART 2 clock reset */
+#define RCC_APB1RSTR_USART3RST ((uint32_t)0x00040000) /*!< USART 3 clock reset */
+#define RCC_APB1RSTR_USART4RST ((uint32_t)0x00080000) /*!< USART 4 clock reset */
+#define RCC_APB1RSTR_I2C1RST ((uint32_t)0x00200000) /*!< I2C 1 clock reset */
+#define RCC_APB1RSTR_I2C2RST ((uint32_t)0x00400000) /*!< I2C 2 clock reset */
+#define RCC_APB1RSTR_CRSRST ((uint32_t)0x08000000) /*!< CRS clock reset */
+#define RCC_APB1RSTR_PWRRST ((uint32_t)0x10000000) /*!< PWR clock reset */
+#define RCC_APB1RSTR_DACRST ((uint32_t)0x20000000) /*!< DAC clock reset */
+#define RCC_APB1RSTR_CECRST ((uint32_t)0x40000000) /*!< CEC clock reset */
+
+/****************** Bit definition for RCC_AHBENR register *****************/
+#define RCC_AHBENR_DMAEN ((uint32_t)0x00000001) /*!< DMA1 clock enable */
+#define RCC_AHBENR_SRAMEN ((uint32_t)0x00000004) /*!< SRAM interface clock enable */
+#define RCC_AHBENR_FLITFEN ((uint32_t)0x00000010) /*!< FLITF clock enable */
+#define RCC_AHBENR_CRCEN ((uint32_t)0x00000040) /*!< CRC clock enable */
+#define RCC_AHBENR_GPIOAEN ((uint32_t)0x00020000) /*!< GPIOA clock enable */
+#define RCC_AHBENR_GPIOBEN ((uint32_t)0x00040000) /*!< GPIOB clock enable */
+#define RCC_AHBENR_GPIOCEN ((uint32_t)0x00080000) /*!< GPIOC clock enable */
+#define RCC_AHBENR_GPIODEN ((uint32_t)0x00100000) /*!< GPIOD clock enable */
+#define RCC_AHBENR_GPIOEEN ((uint32_t)0x00200000) /*!< GPIOE clock enable */
+#define RCC_AHBENR_GPIOFEN ((uint32_t)0x00400000) /*!< GPIOF clock enable */
+#define RCC_AHBENR_TSCEN ((uint32_t)0x01000000) /*!< TS controller clock enable */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_AHBENR_DMA1EN RCC_AHBENR_DMAEN /*!< DMA1 clock enable */
+#define RCC_AHBENR_TSEN RCC_AHBENR_TSCEN /*!< TS clock enable */
+
+/***************** Bit definition for RCC_APB2ENR register *****************/
+#define RCC_APB2ENR_SYSCFGCOMPEN ((uint32_t)0x00000001) /*!< SYSCFG and comparator clock enable */
+#define RCC_APB2ENR_ADCEN ((uint32_t)0x00000200) /*!< ADC1 clock enable */
+#define RCC_APB2ENR_TIM1EN ((uint32_t)0x00000800) /*!< TIM1 clock enable */
+#define RCC_APB2ENR_SPI1EN ((uint32_t)0x00001000) /*!< SPI1 clock enable */
+#define RCC_APB2ENR_USART1EN ((uint32_t)0x00004000) /*!< USART1 clock enable */
+#define RCC_APB2ENR_TIM15EN ((uint32_t)0x00010000) /*!< TIM15 clock enable */
+#define RCC_APB2ENR_TIM16EN ((uint32_t)0x00020000) /*!< TIM16 clock enable */
+#define RCC_APB2ENR_TIM17EN ((uint32_t)0x00040000) /*!< TIM17 clock enable */
+#define RCC_APB2ENR_DBGMCUEN ((uint32_t)0x00400000) /*!< DBGMCU clock enable */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_APB2ENR_SYSCFGEN RCC_APB2ENR_SYSCFGCOMPEN /*!< SYSCFG clock enable */
+#define RCC_APB2ENR_ADC1EN RCC_APB2ENR_ADCEN /*!< ADC1 clock enable */
+
+/***************** Bit definition for RCC_APB1ENR register *****************/
+#define RCC_APB1ENR_TIM2EN ((uint32_t)0x00000001) /*!< Timer 2 clock enable */
+#define RCC_APB1ENR_TIM3EN ((uint32_t)0x00000002) /*!< Timer 3 clock enable */
+#define RCC_APB1ENR_TIM6EN ((uint32_t)0x00000010) /*!< Timer 6 clock enable */
+#define RCC_APB1ENR_TIM7EN ((uint32_t)0x00000020) /*!< Timer 7 clock enable */
+#define RCC_APB1ENR_TIM14EN ((uint32_t)0x00000100) /*!< Timer 14 clock enable */
+#define RCC_APB1ENR_WWDGEN ((uint32_t)0x00000800) /*!< Window Watchdog clock enable */
+#define RCC_APB1ENR_SPI2EN ((uint32_t)0x00004000) /*!< SPI2 clock enable */
+#define RCC_APB1ENR_USART2EN ((uint32_t)0x00020000) /*!< USART2 clock enable */
+#define RCC_APB1ENR_USART3EN ((uint32_t)0x00040000) /*!< USART3 clock enable */
+#define RCC_APB1ENR_USART4EN ((uint32_t)0x00080000) /*!< USART4 clock enable */
+#define RCC_APB1ENR_I2C1EN ((uint32_t)0x00200000) /*!< I2C1 clock enable */
+#define RCC_APB1ENR_I2C2EN ((uint32_t)0x00400000) /*!< I2C2 clock enable */
+#define RCC_APB1ENR_CRSEN ((uint32_t)0x08000000) /*!< CRS clock enable */
+#define RCC_APB1ENR_PWREN ((uint32_t)0x10000000) /*!< PWR clock enable */
+#define RCC_APB1ENR_DACEN ((uint32_t)0x20000000) /*!< DAC clock enable */
+#define RCC_APB1ENR_CECEN ((uint32_t)0x40000000) /*!< CEC clock enable */
+
+/******************* Bit definition for RCC_BDCR register ******************/
+#define RCC_BDCR_LSEON ((uint32_t)0x00000001) /*!< External Low Speed oscillator enable */
+#define RCC_BDCR_LSERDY ((uint32_t)0x00000002) /*!< External Low Speed oscillator Ready */
+#define RCC_BDCR_LSEBYP ((uint32_t)0x00000004) /*!< External Low Speed oscillator Bypass */
+
+#define RCC_BDCR_LSEDRV ((uint32_t)0x00000018) /*!< LSEDRV[1:0] bits (LSE Osc. drive capability) */
+#define RCC_BDCR_LSEDRV_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define RCC_BDCR_LSEDRV_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+
+#define RCC_BDCR_RTCSEL ((uint32_t)0x00000300) /*!< RTCSEL[1:0] bits (RTC clock source selection) */
+#define RCC_BDCR_RTCSEL_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define RCC_BDCR_RTCSEL_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+
+/*!< RTC configuration */
+#define RCC_BDCR_RTCSEL_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
+#define RCC_BDCR_RTCSEL_LSE ((uint32_t)0x00000100) /*!< LSE oscillator clock used as RTC clock */
+#define RCC_BDCR_RTCSEL_LSI ((uint32_t)0x00000200) /*!< LSI oscillator clock used as RTC clock */
+#define RCC_BDCR_RTCSEL_HSE ((uint32_t)0x00000300) /*!< HSE oscillator clock divided by 128 used as RTC clock */
+
+#define RCC_BDCR_RTCEN ((uint32_t)0x00008000) /*!< RTC clock enable */
+#define RCC_BDCR_BDRST ((uint32_t)0x00010000) /*!< Backup domain software reset */
+
+/******************* Bit definition for RCC_CSR register *******************/
+#define RCC_CSR_LSION ((uint32_t)0x00000001) /*!< Internal Low Speed oscillator enable */
+#define RCC_CSR_LSIRDY ((uint32_t)0x00000002) /*!< Internal Low Speed oscillator Ready */
+#define RCC_CSR_V18PWRRSTF ((uint32_t)0x00800000) /*!< V1.8 power domain reset flag */
+#define RCC_CSR_RMVF ((uint32_t)0x01000000) /*!< Remove reset flag */
+#define RCC_CSR_OBLRSTF ((uint32_t)0x02000000) /*!< OBL reset flag */
+#define RCC_CSR_PINRSTF ((uint32_t)0x04000000) /*!< PIN reset flag */
+#define RCC_CSR_PORRSTF ((uint32_t)0x08000000) /*!< POR/PDR reset flag */
+#define RCC_CSR_SFTRSTF ((uint32_t)0x10000000) /*!< Software Reset flag */
+#define RCC_CSR_IWDGRSTF ((uint32_t)0x20000000) /*!< Independent Watchdog reset flag */
+#define RCC_CSR_WWDGRSTF ((uint32_t)0x40000000) /*!< Window watchdog reset flag */
+#define RCC_CSR_LPWRRSTF ((uint32_t)0x80000000) /*!< Low-Power reset flag */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_CSR_OBL RCC_CSR_OBLRSTF /*!< OBL reset flag */
+
+/******************* Bit definition for RCC_AHBRSTR register ***************/
+#define RCC_AHBRSTR_GPIOARST ((uint32_t)0x00020000) /*!< GPIOA clock reset */
+#define RCC_AHBRSTR_GPIOBRST ((uint32_t)0x00040000) /*!< GPIOB clock reset */
+#define RCC_AHBRSTR_GPIOCRST ((uint32_t)0x00080000) /*!< GPIOC clock reset */
+#define RCC_AHBRSTR_GPIODRST ((uint32_t)0x00100000) /*!< GPIOD clock reset */
+#define RCC_AHBRSTR_GPIOERST ((uint32_t)0x00200000) /*!< GPIOE clock reset */
+#define RCC_AHBRSTR_GPIOFRST ((uint32_t)0x00400000) /*!< GPIOF clock reset */
+#define RCC_AHBRSTR_TSCRST ((uint32_t)0x01000000) /*!< TS clock reset */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_AHBRSTR_TSRST RCC_AHBRSTR_TSCRST /*!< TS clock reset */
+
+/******************* Bit definition for RCC_CFGR2 register *****************/
+/*!< PREDIV configuration */
+#define RCC_CFGR2_PREDIV ((uint32_t)0x0000000F) /*!< PREDIV[3:0] bits */
+#define RCC_CFGR2_PREDIV_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR2_PREDIV_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define RCC_CFGR2_PREDIV_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define RCC_CFGR2_PREDIV_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+
+#define RCC_CFGR2_PREDIV_DIV1 ((uint32_t)0x00000000) /*!< PREDIV input clock not divided */
+#define RCC_CFGR2_PREDIV_DIV2 ((uint32_t)0x00000001) /*!< PREDIV input clock divided by 2 */
+#define RCC_CFGR2_PREDIV_DIV3 ((uint32_t)0x00000002) /*!< PREDIV input clock divided by 3 */
+#define RCC_CFGR2_PREDIV_DIV4 ((uint32_t)0x00000003) /*!< PREDIV input clock divided by 4 */
+#define RCC_CFGR2_PREDIV_DIV5 ((uint32_t)0x00000004) /*!< PREDIV input clock divided by 5 */
+#define RCC_CFGR2_PREDIV_DIV6 ((uint32_t)0x00000005) /*!< PREDIV input clock divided by 6 */
+#define RCC_CFGR2_PREDIV_DIV7 ((uint32_t)0x00000006) /*!< PREDIV input clock divided by 7 */
+#define RCC_CFGR2_PREDIV_DIV8 ((uint32_t)0x00000007) /*!< PREDIV input clock divided by 8 */
+#define RCC_CFGR2_PREDIV_DIV9 ((uint32_t)0x00000008) /*!< PREDIV input clock divided by 9 */
+#define RCC_CFGR2_PREDIV_DIV10 ((uint32_t)0x00000009) /*!< PREDIV input clock divided by 10 */
+#define RCC_CFGR2_PREDIV_DIV11 ((uint32_t)0x0000000A) /*!< PREDIV input clock divided by 11 */
+#define RCC_CFGR2_PREDIV_DIV12 ((uint32_t)0x0000000B) /*!< PREDIV input clock divided by 12 */
+#define RCC_CFGR2_PREDIV_DIV13 ((uint32_t)0x0000000C) /*!< PREDIV input clock divided by 13 */
+#define RCC_CFGR2_PREDIV_DIV14 ((uint32_t)0x0000000D) /*!< PREDIV input clock divided by 14 */
+#define RCC_CFGR2_PREDIV_DIV15 ((uint32_t)0x0000000E) /*!< PREDIV input clock divided by 15 */
+#define RCC_CFGR2_PREDIV_DIV16 ((uint32_t)0x0000000F) /*!< PREDIV input clock divided by 16 */
+
+/******************* Bit definition for RCC_CFGR3 register *****************/
+/*!< USART1 Clock source selection */
+#define RCC_CFGR3_USART1SW ((uint32_t)0x00000003) /*!< USART1SW[1:0] bits */
+#define RCC_CFGR3_USART1SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR3_USART1SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+#define RCC_CFGR3_USART1SW_PCLK ((uint32_t)0x00000000) /*!< PCLK clock used as USART1 clock source */
+#define RCC_CFGR3_USART1SW_SYSCLK ((uint32_t)0x00000001) /*!< System clock selected as USART1 clock source */
+#define RCC_CFGR3_USART1SW_LSE ((uint32_t)0x00000002) /*!< LSE oscillator clock used as USART1 clock source */
+#define RCC_CFGR3_USART1SW_HSI ((uint32_t)0x00000003) /*!< HSI oscillator clock used as USART1 clock source */
+
+/*!< I2C1 Clock source selection */
+#define RCC_CFGR3_I2C1SW ((uint32_t)0x00000010) /*!< I2C1SW bits */
+
+#define RCC_CFGR3_I2C1SW_HSI ((uint32_t)0x00000000) /*!< HSI oscillator clock used as I2C1 clock source */
+#define RCC_CFGR3_I2C1SW_SYSCLK ((uint32_t)0x00000010) /*!< System clock selected as I2C1 clock source */
+
+/*!< CEC Clock source selection */
+#define RCC_CFGR3_CECSW ((uint32_t)0x00000040) /*!< CECSW bits */
+
+#define RCC_CFGR3_CECSW_HSI_DIV244 ((uint32_t)0x00000000) /*!< HSI clock divided by 244 selected as HDMI CEC entry clock source */
+#define RCC_CFGR3_CECSW_LSE ((uint32_t)0x00000040) /*!< LSE clock selected as HDMI CEC entry clock source */
+
+/*!< USART2 Clock source selection */
+#define RCC_CFGR3_USART2SW ((uint32_t)0x00030000) /*!< USART2SW[1:0] bits */
+#define RCC_CFGR3_USART2SW_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define RCC_CFGR3_USART2SW_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+
+#define RCC_CFGR3_USART2SW_PCLK ((uint32_t)0x00000000) /*!< PCLK clock used as USART2 clock source */
+#define RCC_CFGR3_USART2SW_SYSCLK ((uint32_t)0x00010000) /*!< System clock selected as USART2 clock source */
+#define RCC_CFGR3_USART2SW_LSE ((uint32_t)0x00020000) /*!< LSE oscillator clock used as USART2 clock source */
+#define RCC_CFGR3_USART2SW_HSI ((uint32_t)0x00030000) /*!< HSI oscillator clock used as USART2 clock source */
+
+/******************* Bit definition for RCC_CR2 register *******************/
+#define RCC_CR2_HSI14ON ((uint32_t)0x00000001) /*!< Internal High Speed 14MHz clock enable */
+#define RCC_CR2_HSI14RDY ((uint32_t)0x00000002) /*!< Internal High Speed 14MHz clock ready flag */
+#define RCC_CR2_HSI14DIS ((uint32_t)0x00000004) /*!< Internal High Speed 14MHz clock disable */
+#define RCC_CR2_HSI14TRIM ((uint32_t)0x000000F8) /*!< Internal High Speed 14MHz clock trimming */
+#define RCC_CR2_HSI14CAL ((uint32_t)0x0000FF00) /*!< Internal High Speed 14MHz clock Calibration */
+#define RCC_CR2_HSI48ON ((uint32_t)0x00010000) /*!< Internal High Speed 48MHz clock enable */
+#define RCC_CR2_HSI48RDY ((uint32_t)0x00020000) /*!< Internal High Speed 48MHz clock ready flag */
+#define RCC_CR2_HSI48CAL ((uint32_t)0xFF000000) /*!< Internal High Speed 48MHz clock Calibration */
+
+/*****************************************************************************/
+/* */
+/* Real-Time Clock (RTC) */
+/* */
+/*****************************************************************************/
+/******************** Bits definition for RTC_TR register ******************/
+#define RTC_TR_PM ((uint32_t)0x00400000)
+#define RTC_TR_HT ((uint32_t)0x00300000)
+#define RTC_TR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TR_HU ((uint32_t)0x000F0000)
+#define RTC_TR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TR_MNT ((uint32_t)0x00007000)
+#define RTC_TR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TR_MNU ((uint32_t)0x00000F00)
+#define RTC_TR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TR_ST ((uint32_t)0x00000070)
+#define RTC_TR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TR_SU ((uint32_t)0x0000000F)
+#define RTC_TR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_DR register ******************/
+#define RTC_DR_YT ((uint32_t)0x00F00000)
+#define RTC_DR_YT_0 ((uint32_t)0x00100000)
+#define RTC_DR_YT_1 ((uint32_t)0x00200000)
+#define RTC_DR_YT_2 ((uint32_t)0x00400000)
+#define RTC_DR_YT_3 ((uint32_t)0x00800000)
+#define RTC_DR_YU ((uint32_t)0x000F0000)
+#define RTC_DR_YU_0 ((uint32_t)0x00010000)
+#define RTC_DR_YU_1 ((uint32_t)0x00020000)
+#define RTC_DR_YU_2 ((uint32_t)0x00040000)
+#define RTC_DR_YU_3 ((uint32_t)0x00080000)
+#define RTC_DR_WDU ((uint32_t)0x0000E000)
+#define RTC_DR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_DR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_DR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_DR_MT ((uint32_t)0x00001000)
+#define RTC_DR_MU ((uint32_t)0x00000F00)
+#define RTC_DR_MU_0 ((uint32_t)0x00000100)
+#define RTC_DR_MU_1 ((uint32_t)0x00000200)
+#define RTC_DR_MU_2 ((uint32_t)0x00000400)
+#define RTC_DR_MU_3 ((uint32_t)0x00000800)
+#define RTC_DR_DT ((uint32_t)0x00000030)
+#define RTC_DR_DT_0 ((uint32_t)0x00000010)
+#define RTC_DR_DT_1 ((uint32_t)0x00000020)
+#define RTC_DR_DU ((uint32_t)0x0000000F)
+#define RTC_DR_DU_0 ((uint32_t)0x00000001)
+#define RTC_DR_DU_1 ((uint32_t)0x00000002)
+#define RTC_DR_DU_2 ((uint32_t)0x00000004)
+#define RTC_DR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_CR register ******************/
+#define RTC_CR_COE ((uint32_t)0x00800000)
+#define RTC_CR_OSEL ((uint32_t)0x00600000)
+#define RTC_CR_OSEL_0 ((uint32_t)0x00200000)
+#define RTC_CR_OSEL_1 ((uint32_t)0x00400000)
+#define RTC_CR_POL ((uint32_t)0x00100000)
+#define RTC_CR_COSEL ((uint32_t)0x00080000)
+#define RTC_CR_BCK ((uint32_t)0x00040000)
+#define RTC_CR_SUB1H ((uint32_t)0x00020000)
+#define RTC_CR_ADD1H ((uint32_t)0x00010000)
+#define RTC_CR_TSIE ((uint32_t)0x00008000)
+#define RTC_CR_ALRAIE ((uint32_t)0x00001000)
+#define RTC_CR_TSE ((uint32_t)0x00000800)
+#define RTC_CR_WUTE ((uint32_t)0x00000400)
+#define RTC_CR_ALRAE ((uint32_t)0x00000100)
+#define RTC_CR_FMT ((uint32_t)0x00000040)
+#define RTC_CR_BYPSHAD ((uint32_t)0x00000020)
+#define RTC_CR_REFCKON ((uint32_t)0x00000010)
+#define RTC_CR_TSEDGE ((uint32_t)0x00000008)
+#define RTC_CR_WUCKSEL ((uint32_t)0x00000007)
+#define RTC_CR_WUCKSEL_0 ((uint32_t)0x00000001)
+#define RTC_CR_WUCKSEL_1 ((uint32_t)0x00000002)
+#define RTC_CR_WUCKSEL_2 ((uint32_t)0x00000004)
+
+/******************** Bits definition for RTC_ISR register *****************/
+#define RTC_ISR_RECALPF ((uint32_t)0x00010000)
+#define RTC_ISR_TAMP3F ((uint32_t)0x00008000)
+#define RTC_ISR_TAMP2F ((uint32_t)0x00004000)
+#define RTC_ISR_TAMP1F ((uint32_t)0x00002000)
+#define RTC_ISR_TSOVF ((uint32_t)0x00001000)
+#define RTC_ISR_TSF ((uint32_t)0x00000800)
+#define RTC_ISR_WUTF ((uint32_t)0x00000400)
+#define RTC_ISR_ALRAF ((uint32_t)0x00000100)
+#define RTC_ISR_INIT ((uint32_t)0x00000080)
+#define RTC_ISR_INITF ((uint32_t)0x00000040)
+#define RTC_ISR_RSF ((uint32_t)0x00000020)
+#define RTC_ISR_INITS ((uint32_t)0x00000010)
+#define RTC_ISR_SHPF ((uint32_t)0x00000008)
+#define RTC_ISR_WUTWF ((uint32_t)0x00000004)
+#define RTC_ISR_ALRAWF ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_PRER register ****************/
+#define RTC_PRER_PREDIV_A ((uint32_t)0x007F0000)
+#define RTC_PRER_PREDIV_S ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_WUTR register ****************/
+#define RTC_WUTR_WUT ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_ALRMAR register **************/
+#define RTC_ALRMAR_MSK4 ((uint32_t)0x80000000)
+#define RTC_ALRMAR_WDSEL ((uint32_t)0x40000000)
+#define RTC_ALRMAR_DT ((uint32_t)0x30000000)
+#define RTC_ALRMAR_DT_0 ((uint32_t)0x10000000)
+#define RTC_ALRMAR_DT_1 ((uint32_t)0x20000000)
+#define RTC_ALRMAR_DU ((uint32_t)0x0F000000)
+#define RTC_ALRMAR_DU_0 ((uint32_t)0x01000000)
+#define RTC_ALRMAR_DU_1 ((uint32_t)0x02000000)
+#define RTC_ALRMAR_DU_2 ((uint32_t)0x04000000)
+#define RTC_ALRMAR_DU_3 ((uint32_t)0x08000000)
+#define RTC_ALRMAR_MSK3 ((uint32_t)0x00800000)
+#define RTC_ALRMAR_PM ((uint32_t)0x00400000)
+#define RTC_ALRMAR_HT ((uint32_t)0x00300000)
+#define RTC_ALRMAR_HT_0 ((uint32_t)0x00100000)
+#define RTC_ALRMAR_HT_1 ((uint32_t)0x00200000)
+#define RTC_ALRMAR_HU ((uint32_t)0x000F0000)
+#define RTC_ALRMAR_HU_0 ((uint32_t)0x00010000)
+#define RTC_ALRMAR_HU_1 ((uint32_t)0x00020000)
+#define RTC_ALRMAR_HU_2 ((uint32_t)0x00040000)
+#define RTC_ALRMAR_HU_3 ((uint32_t)0x00080000)
+#define RTC_ALRMAR_MSK2 ((uint32_t)0x00008000)
+#define RTC_ALRMAR_MNT ((uint32_t)0x00007000)
+#define RTC_ALRMAR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_ALRMAR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_ALRMAR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_ALRMAR_MNU ((uint32_t)0x00000F00)
+#define RTC_ALRMAR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_ALRMAR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_ALRMAR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_ALRMAR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_ALRMAR_MSK1 ((uint32_t)0x00000080)
+#define RTC_ALRMAR_ST ((uint32_t)0x00000070)
+#define RTC_ALRMAR_ST_0 ((uint32_t)0x00000010)
+#define RTC_ALRMAR_ST_1 ((uint32_t)0x00000020)
+#define RTC_ALRMAR_ST_2 ((uint32_t)0x00000040)
+#define RTC_ALRMAR_SU ((uint32_t)0x0000000F)
+#define RTC_ALRMAR_SU_0 ((uint32_t)0x00000001)
+#define RTC_ALRMAR_SU_1 ((uint32_t)0x00000002)
+#define RTC_ALRMAR_SU_2 ((uint32_t)0x00000004)
+#define RTC_ALRMAR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_WPR register *****************/
+#define RTC_WPR_KEY ((uint32_t)0x000000FF)
+
+/******************** Bits definition for RTC_SSR register *****************/
+#define RTC_SSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_SHIFTR register **************/
+#define RTC_SHIFTR_SUBFS ((uint32_t)0x00007FFF)
+#define RTC_SHIFTR_ADD1S ((uint32_t)0x80000000)
+
+/******************** Bits definition for RTC_TSTR register ****************/
+#define RTC_TSTR_PM ((uint32_t)0x00400000)
+#define RTC_TSTR_HT ((uint32_t)0x00300000)
+#define RTC_TSTR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TSTR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TSTR_HU ((uint32_t)0x000F0000)
+#define RTC_TSTR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TSTR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TSTR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TSTR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TSTR_MNT ((uint32_t)0x00007000)
+#define RTC_TSTR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TSTR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TSTR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TSTR_MNU ((uint32_t)0x00000F00)
+#define RTC_TSTR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TSTR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TSTR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TSTR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TSTR_ST ((uint32_t)0x00000070)
+#define RTC_TSTR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TSTR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TSTR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TSTR_SU ((uint32_t)0x0000000F)
+#define RTC_TSTR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TSTR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TSTR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TSTR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSDR register ****************/
+#define RTC_TSDR_WDU ((uint32_t)0x0000E000)
+#define RTC_TSDR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_TSDR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_TSDR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_TSDR_MT ((uint32_t)0x00001000)
+#define RTC_TSDR_MU ((uint32_t)0x00000F00)
+#define RTC_TSDR_MU_0 ((uint32_t)0x00000100)
+#define RTC_TSDR_MU_1 ((uint32_t)0x00000200)
+#define RTC_TSDR_MU_2 ((uint32_t)0x00000400)
+#define RTC_TSDR_MU_3 ((uint32_t)0x00000800)
+#define RTC_TSDR_DT ((uint32_t)0x00000030)
+#define RTC_TSDR_DT_0 ((uint32_t)0x00000010)
+#define RTC_TSDR_DT_1 ((uint32_t)0x00000020)
+#define RTC_TSDR_DU ((uint32_t)0x0000000F)
+#define RTC_TSDR_DU_0 ((uint32_t)0x00000001)
+#define RTC_TSDR_DU_1 ((uint32_t)0x00000002)
+#define RTC_TSDR_DU_2 ((uint32_t)0x00000004)
+#define RTC_TSDR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSSSR register ***************/
+#define RTC_TSSSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_CALR register ****************/
+#define RTC_CALR_CALP ((uint32_t)0x00008000)
+#define RTC_CALR_CALW8 ((uint32_t)0x00004000)
+#define RTC_CALR_CALW16 ((uint32_t)0x00002000)
+#define RTC_CALR_CALM ((uint32_t)0x000001FF)
+#define RTC_CALR_CALM_0 ((uint32_t)0x00000001)
+#define RTC_CALR_CALM_1 ((uint32_t)0x00000002)
+#define RTC_CALR_CALM_2 ((uint32_t)0x00000004)
+#define RTC_CALR_CALM_3 ((uint32_t)0x00000008)
+#define RTC_CALR_CALM_4 ((uint32_t)0x00000010)
+#define RTC_CALR_CALM_5 ((uint32_t)0x00000020)
+#define RTC_CALR_CALM_6 ((uint32_t)0x00000040)
+#define RTC_CALR_CALM_7 ((uint32_t)0x00000080)
+#define RTC_CALR_CALM_8 ((uint32_t)0x00000100)
+
+/******************** Bits definition for RTC_TAFCR register ***************/
+#define RTC_TAFCR_ALARMOUTTYPE ((uint32_t)0x00040000)
+#define RTC_TAFCR_TAMPPUDIS ((uint32_t)0x00008000)
+#define RTC_TAFCR_TAMPPRCH ((uint32_t)0x00006000)
+#define RTC_TAFCR_TAMPPRCH_0 ((uint32_t)0x00002000)
+#define RTC_TAFCR_TAMPPRCH_1 ((uint32_t)0x00004000)
+#define RTC_TAFCR_TAMPFLT ((uint32_t)0x00001800)
+#define RTC_TAFCR_TAMPFLT_0 ((uint32_t)0x00000800)
+#define RTC_TAFCR_TAMPFLT_1 ((uint32_t)0x00001000)
+#define RTC_TAFCR_TAMPFREQ ((uint32_t)0x00000700)
+#define RTC_TAFCR_TAMPFREQ_0 ((uint32_t)0x00000100)
+#define RTC_TAFCR_TAMPFREQ_1 ((uint32_t)0x00000200)
+#define RTC_TAFCR_TAMPFREQ_2 ((uint32_t)0x00000400)
+#define RTC_TAFCR_TAMPTS ((uint32_t)0x00000080)
+#define RTC_TAFCR_TAMP3TRG ((uint32_t)0x00000040)
+#define RTC_TAFCR_TAMP3E ((uint32_t)0x00000020)
+#define RTC_TAFCR_TAMP2TRG ((uint32_t)0x00000010)
+#define RTC_TAFCR_TAMP2E ((uint32_t)0x00000008)
+#define RTC_TAFCR_TAMPIE ((uint32_t)0x00000004)
+#define RTC_TAFCR_TAMP1TRG ((uint32_t)0x00000002)
+#define RTC_TAFCR_TAMP1E ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_ALRMASSR register ************/
+#define RTC_ALRMASSR_MASKSS ((uint32_t)0x0F000000)
+#define RTC_ALRMASSR_MASKSS_0 ((uint32_t)0x01000000)
+#define RTC_ALRMASSR_MASKSS_1 ((uint32_t)0x02000000)
+#define RTC_ALRMASSR_MASKSS_2 ((uint32_t)0x04000000)
+#define RTC_ALRMASSR_MASKSS_3 ((uint32_t)0x08000000)
+#define RTC_ALRMASSR_SS ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_BKP0R register ***************/
+#define RTC_BKP0R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP1R register ***************/
+#define RTC_BKP1R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP2R register ***************/
+#define RTC_BKP2R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP3R register ***************/
+#define RTC_BKP3R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP4R register ***************/
+#define RTC_BKP4R ((uint32_t)0xFFFFFFFF)
+
+/******************** Number of backup registers ******************************/
+#define RTC_BKP_NUMBER ((uint32_t)0x00000005)
+
+/*****************************************************************************/
+/* */
+/* Serial Peripheral Interface (SPI) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for SPI_CR1 register *******************/
+#define SPI_CR1_CPHA ((uint32_t)0x00000001) /*!< Clock Phase */
+#define SPI_CR1_CPOL ((uint32_t)0x00000002) /*!< Clock Polarity */
+#define SPI_CR1_MSTR ((uint32_t)0x00000004) /*!< Master Selection */
+#define SPI_CR1_BR ((uint32_t)0x00000038) /*!< BR[2:0] bits (Baud Rate Control) */
+#define SPI_CR1_BR_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define SPI_CR1_BR_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define SPI_CR1_BR_2 ((uint32_t)0x00000020) /*!< Bit 2 */
+#define SPI_CR1_SPE ((uint32_t)0x00000040) /*!< SPI Enable */
+#define SPI_CR1_LSBFIRST ((uint32_t)0x00000080) /*!< Frame Format */
+#define SPI_CR1_SSI ((uint32_t)0x00000100) /*!< Internal slave select */
+#define SPI_CR1_SSM ((uint32_t)0x00000200) /*!< Software slave management */
+#define SPI_CR1_RXONLY ((uint32_t)0x00000400) /*!< Receive only */
+#define SPI_CR1_CRCL ((uint32_t)0x00000800) /*!< CRC Length */
+#define SPI_CR1_CRCNEXT ((uint32_t)0x00001000) /*!< Transmit CRC next */
+#define SPI_CR1_CRCEN ((uint32_t)0x00002000) /*!< Hardware CRC calculation enable */
+#define SPI_CR1_BIDIOE ((uint32_t)0x00004000) /*!< Output enable in bidirectional mode */
+#define SPI_CR1_BIDIMODE ((uint32_t)0x00008000) /*!< Bidirectional data mode enable */
+
+/******************* Bit definition for SPI_CR2 register *******************/
+#define SPI_CR2_RXDMAEN ((uint32_t)0x00000001) /*!< Rx Buffer DMA Enable */
+#define SPI_CR2_TXDMAEN ((uint32_t)0x00000002) /*!< Tx Buffer DMA Enable */
+#define SPI_CR2_SSOE ((uint32_t)0x00000004) /*!< SS Output Enable */
+#define SPI_CR2_NSSP ((uint32_t)0x00000008) /*!< NSS pulse management Enable */
+#define SPI_CR2_FRF ((uint32_t)0x00000010) /*!< Frame Format Enable */
+#define SPI_CR2_ERRIE ((uint32_t)0x00000020) /*!< Error Interrupt Enable */
+#define SPI_CR2_RXNEIE ((uint32_t)0x00000040) /*!< RX buffer Not Empty Interrupt Enable */
+#define SPI_CR2_TXEIE ((uint32_t)0x00000080) /*!< Tx buffer Empty Interrupt Enable */
+#define SPI_CR2_DS ((uint32_t)0x00000F00) /*!< DS[3:0] Data Size */
+#define SPI_CR2_DS_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define SPI_CR2_DS_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define SPI_CR2_DS_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define SPI_CR2_DS_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+#define SPI_CR2_FRXTH ((uint32_t)0x00001000) /*!< FIFO reception Threshold */
+#define SPI_CR2_LDMARX ((uint32_t)0x00002000) /*!< Last DMA transfer for reception */
+#define SPI_CR2_LDMATX ((uint32_t)0x00004000) /*!< Last DMA transfer for transmission */
+
+/******************** Bit definition for SPI_SR register *******************/
+#define SPI_SR_RXNE ((uint32_t)0x00000001) /*!< Receive buffer Not Empty */
+#define SPI_SR_TXE ((uint32_t)0x00000002) /*!< Transmit buffer Empty */
+#define SPI_SR_CHSIDE ((uint32_t)0x00000004) /*!< Channel side */
+#define SPI_SR_UDR ((uint32_t)0x00000008) /*!< Underrun flag */
+#define SPI_SR_CRCERR ((uint32_t)0x00000010) /*!< CRC Error flag */
+#define SPI_SR_MODF ((uint32_t)0x00000020) /*!< Mode fault */
+#define SPI_SR_OVR ((uint32_t)0x00000040) /*!< Overrun flag */
+#define SPI_SR_BSY ((uint32_t)0x00000080) /*!< Busy flag */
+#define SPI_SR_FRE ((uint32_t)0x00000100) /*!< TI frame format error */
+#define SPI_SR_FRLVL ((uint32_t)0x00000600) /*!< FIFO Reception Level */
+#define SPI_SR_FRLVL_0 ((uint32_t)0x00000200) /*!< Bit 0 */
+#define SPI_SR_FRLVL_1 ((uint32_t)0x00000400) /*!< Bit 1 */
+#define SPI_SR_FTLVL ((uint32_t)0x00001800) /*!< FIFO Transmission Level */
+#define SPI_SR_FTLVL_0 ((uint32_t)0x00000800) /*!< Bit 0 */
+#define SPI_SR_FTLVL_1 ((uint32_t)0x00001000) /*!< Bit 1 */
+
+/******************** Bit definition for SPI_DR register *******************/
+#define SPI_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data Register */
+
+/******************* Bit definition for SPI_CRCPR register *****************/
+#define SPI_CRCPR_CRCPOLY ((uint32_t)0xFFFFFFFF) /*!< CRC polynomial register */
+
+/****************** Bit definition for SPI_RXCRCR register *****************/
+#define SPI_RXCRCR_RXCRC ((uint32_t)0xFFFFFFFF) /*!< Rx CRC Register */
+
+/****************** Bit definition for SPI_TXCRCR register *****************/
+#define SPI_TXCRCR_TXCRC ((uint32_t)0xFFFFFFFF) /*!< Tx CRC Register */
+
+/****************** Bit definition for SPI_I2SCFGR register ****************/
+#define SPI_I2SCFGR_CHLEN ((uint32_t)0x00000001) /*!<Channel length (number of bits per audio channel) */
+#define SPI_I2SCFGR_DATLEN ((uint32_t)0x00000006) /*!<DATLEN[1:0] bits (Data length to be transferred) */
+#define SPI_I2SCFGR_DATLEN_0 ((uint32_t)0x00000002) /*!<Bit 0 */
+#define SPI_I2SCFGR_DATLEN_1 ((uint32_t)0x00000004) /*!<Bit 1 */
+#define SPI_I2SCFGR_CKPOL ((uint32_t)0x00000008) /*!<steady state clock polarity */
+#define SPI_I2SCFGR_I2SSTD ((uint32_t)0x00000030) /*!<I2SSTD[1:0] bits (I2S standard selection) */
+#define SPI_I2SCFGR_I2SSTD_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SSTD_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define SPI_I2SCFGR_PCMSYNC ((uint32_t)0x00000080) /*!<PCM frame synchronization */
+#define SPI_I2SCFGR_I2SCFG ((uint32_t)0x00000300) /*!<I2SCFG[1:0] bits (I2S configuration mode) */
+#define SPI_I2SCFGR_I2SCFG_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SCFG_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define SPI_I2SCFGR_I2SE ((uint32_t)0x00000400) /*!<I2S Enable */
+#define SPI_I2SCFGR_I2SMOD ((uint32_t)0x00000800) /*!<I2S mode selection */
+
+/****************** Bit definition for SPI_I2SPR register ******************/
+#define SPI_I2SPR_I2SDIV ((uint32_t)0x000000FF) /*!<I2S Linear prescaler */
+#define SPI_I2SPR_ODD ((uint32_t)0x00000100) /*!<Odd factor for the prescaler */
+#define SPI_I2SPR_MCKOE ((uint32_t)0x00000200) /*!<Master Clock Output Enable */
+
+/*****************************************************************************/
+/* */
+/* System Configuration (SYSCFG) */
+/* */
+/*****************************************************************************/
+/***************** Bit definition for SYSCFG_CFGR1 register ****************/
+#define SYSCFG_CFGR1_MEM_MODE ((uint32_t)0x00000003) /*!< SYSCFG_Memory Remap Config */
+#define SYSCFG_CFGR1_MEM_MODE_0 ((uint32_t)0x00000001) /*!< SYSCFG_Memory Remap Config Bit 0 */
+#define SYSCFG_CFGR1_MEM_MODE_1 ((uint32_t)0x00000002) /*!< SYSCFG_Memory Remap Config Bit 1 */
+
+#define SYSCFG_CFGR1_DMA_RMP ((uint32_t)0x7F007F00) /*!< DMA remap mask */
+#define SYSCFG_CFGR1_ADC_DMA_RMP ((uint32_t)0x00000100) /*!< ADC DMA remap */
+#define SYSCFG_CFGR1_USART1TX_DMA_RMP ((uint32_t)0x00000200) /*!< USART1 TX DMA remap */
+#define SYSCFG_CFGR1_USART1RX_DMA_RMP ((uint32_t)0x00000400) /*!< USART1 RX DMA remap */
+#define SYSCFG_CFGR1_TIM16_DMA_RMP ((uint32_t)0x00000800) /*!< Timer 16 DMA remap */
+#define SYSCFG_CFGR1_TIM17_DMA_RMP ((uint32_t)0x00001000) /*!< Timer 17 DMA remap */
+#define SYSCFG_CFGR1_TIM16_DMA_RMP2 ((uint32_t)0x00002000) /*!< Timer 16 DMA remap 2 */
+#define SYSCFG_CFGR1_TIM17_DMA_RMP2 ((uint32_t)0x00004000) /*!< Timer 17 DMA remap 2 */
+#define SYSCFG_CFGR1_SPI2_DMA_RMP ((uint32_t)0x01000000) /*!< SPI2 DMA remap */
+#define SYSCFG_CFGR1_USART2_DMA_RMP ((uint32_t)0x02000000) /*!< USART2 DMA remap */
+#define SYSCFG_CFGR1_USART3_DMA_RMP ((uint32_t)0x04000000) /*!< USART3 DMA remap */
+#define SYSCFG_CFGR1_I2C1_DMA_RMP ((uint32_t)0x08000000) /*!< I2C1 DMA remap */
+#define SYSCFG_CFGR1_TIM1_DMA_RMP ((uint32_t)0x10000000) /*!< TIM1 DMA remap */
+#define SYSCFG_CFGR1_TIM2_DMA_RMP ((uint32_t)0x20000000) /*!< TIM2 DMA remap */
+#define SYSCFG_CFGR1_TIM3_DMA_RMP ((uint32_t)0x40000000) /*!< TIM3 DMA remap */
+
+#define SYSCFG_CFGR1_I2C_FMP_PB6 ((uint32_t)0x00010000) /*!< I2C PB6 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB7 ((uint32_t)0x00020000) /*!< I2C PB7 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB8 ((uint32_t)0x00040000) /*!< I2C PB8 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB9 ((uint32_t)0x00080000) /*!< I2C PB9 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_I2C1 ((uint32_t)0x00100000) /*!< Enable Fast Mode Plus on PB10, PB11, PF6 and PF7 */
+#define SYSCFG_CFGR1_I2C_FMP_I2C2 ((uint32_t)0x00200000) /*!< Enable I2C2 Fast mode plus */
+
+/***************** Bit definition for SYSCFG_EXTICR1 register **************/
+#define SYSCFG_EXTICR1_EXTI0 ((uint16_t)0x000F) /*!< EXTI 0 configuration */
+#define SYSCFG_EXTICR1_EXTI1 ((uint16_t)0x00F0) /*!< EXTI 1 configuration */
+#define SYSCFG_EXTICR1_EXTI2 ((uint16_t)0x0F00) /*!< EXTI 2 configuration */
+#define SYSCFG_EXTICR1_EXTI3 ((uint16_t)0xF000) /*!< EXTI 3 configuration */
+
+/**
+ * @brief EXTI0 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI0_PA ((uint16_t)0x0000) /*!< PA[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PB ((uint16_t)0x0001) /*!< PB[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PC ((uint16_t)0x0002) /*!< PC[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PD ((uint16_t)0x0003) /*!< PD[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PE ((uint16_t)0x0004) /*!< PE[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PF ((uint16_t)0x0005) /*!< PF[0] pin */
+
+/**
+ * @brief EXTI1 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI1_PA ((uint16_t)0x0000) /*!< PA[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PB ((uint16_t)0x0010) /*!< PB[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PC ((uint16_t)0x0020) /*!< PC[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PD ((uint16_t)0x0030) /*!< PD[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PE ((uint16_t)0x0040) /*!< PE[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PF ((uint16_t)0x0050) /*!< PF[1] pin */
+
+/**
+ * @brief EXTI2 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI2_PA ((uint16_t)0x0000) /*!< PA[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PB ((uint16_t)0x0100) /*!< PB[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PC ((uint16_t)0x0200) /*!< PC[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PD ((uint16_t)0x0300) /*!< PD[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PE ((uint16_t)0x0400) /*!< PE[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PF ((uint16_t)0x0500) /*!< PF[2] pin */
+
+/**
+ * @brief EXTI3 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI3_PA ((uint16_t)0x0000) /*!< PA[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PB ((uint16_t)0x1000) /*!< PB[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PC ((uint16_t)0x2000) /*!< PC[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PD ((uint16_t)0x3000) /*!< PD[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PE ((uint16_t)0x4000) /*!< PE[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PF ((uint16_t)0x5000) /*!< PF[3] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR2 register **************/
+#define SYSCFG_EXTICR2_EXTI4 ((uint16_t)0x000F) /*!< EXTI 4 configuration */
+#define SYSCFG_EXTICR2_EXTI5 ((uint16_t)0x00F0) /*!< EXTI 5 configuration */
+#define SYSCFG_EXTICR2_EXTI6 ((uint16_t)0x0F00) /*!< EXTI 6 configuration */
+#define SYSCFG_EXTICR2_EXTI7 ((uint16_t)0xF000) /*!< EXTI 7 configuration */
+
+/**
+ * @brief EXTI4 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI4_PA ((uint16_t)0x0000) /*!< PA[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PB ((uint16_t)0x0001) /*!< PB[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PC ((uint16_t)0x0002) /*!< PC[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PD ((uint16_t)0x0003) /*!< PD[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PE ((uint16_t)0x0004) /*!< PE[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PF ((uint16_t)0x0005) /*!< PF[4] pin */
+
+/**
+ * @brief EXTI5 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI5_PA ((uint16_t)0x0000) /*!< PA[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PB ((uint16_t)0x0010) /*!< PB[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PC ((uint16_t)0x0020) /*!< PC[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PD ((uint16_t)0x0030) /*!< PD[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PE ((uint16_t)0x0040) /*!< PE[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PF ((uint16_t)0x0050) /*!< PF[5] pin */
+
+/**
+ * @brief EXTI6 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI6_PA ((uint16_t)0x0000) /*!< PA[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PB ((uint16_t)0x0100) /*!< PB[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PC ((uint16_t)0x0200) /*!< PC[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PD ((uint16_t)0x0300) /*!< PD[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PE ((uint16_t)0x0400) /*!< PE[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PF ((uint16_t)0x0500) /*!< PF[6] pin */
+
+/**
+ * @brief EXTI7 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI7_PA ((uint16_t)0x0000) /*!< PA[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PB ((uint16_t)0x1000) /*!< PB[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PC ((uint16_t)0x2000) /*!< PC[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PD ((uint16_t)0x3000) /*!< PD[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PE ((uint16_t)0x4000) /*!< PE[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PF ((uint16_t)0x5000) /*!< PF[7] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR3 register **************/
+#define SYSCFG_EXTICR3_EXTI8 ((uint16_t)0x000F) /*!< EXTI 8 configuration */
+#define SYSCFG_EXTICR3_EXTI9 ((uint16_t)0x00F0) /*!< EXTI 9 configuration */
+#define SYSCFG_EXTICR3_EXTI10 ((uint16_t)0x0F00) /*!< EXTI 10 configuration */
+#define SYSCFG_EXTICR3_EXTI11 ((uint16_t)0xF000) /*!< EXTI 11 configuration */
+
+/**
+ * @brief EXTI8 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI8_PA ((uint16_t)0x0000) /*!< PA[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PB ((uint16_t)0x0001) /*!< PB[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PC ((uint16_t)0x0002) /*!< PC[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PD ((uint16_t)0x0003) /*!< PD[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PE ((uint16_t)0x0004) /*!< PE[8] pin */
+
+/**
+ * @brief EXTI9 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI9_PA ((uint16_t)0x0000) /*!< PA[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PB ((uint16_t)0x0010) /*!< PB[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PC ((uint16_t)0x0020) /*!< PC[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PD ((uint16_t)0x0030) /*!< PD[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PE ((uint16_t)0x0040) /*!< PE[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PF ((uint16_t)0x0050) /*!< PF[9] pin */
+
+/**
+ * @brief EXTI10 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI10_PA ((uint16_t)0x0000) /*!< PA[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PB ((uint16_t)0x0100) /*!< PB[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PC ((uint16_t)0x0200) /*!< PC[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PD ((uint16_t)0x0300) /*!< PE[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PE ((uint16_t)0x0400) /*!< PD[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PF ((uint16_t)0x0500) /*!< PF[10] pin */
+
+/**
+ * @brief EXTI11 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI11_PA ((uint16_t)0x0000) /*!< PA[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PB ((uint16_t)0x1000) /*!< PB[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PC ((uint16_t)0x2000) /*!< PC[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PD ((uint16_t)0x3000) /*!< PD[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PE ((uint16_t)0x4000) /*!< PE[11] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR4 register **************/
+#define SYSCFG_EXTICR4_EXTI12 ((uint16_t)0x000F) /*!< EXTI 12 configuration */
+#define SYSCFG_EXTICR4_EXTI13 ((uint16_t)0x00F0) /*!< EXTI 13 configuration */
+#define SYSCFG_EXTICR4_EXTI14 ((uint16_t)0x0F00) /*!< EXTI 14 configuration */
+#define SYSCFG_EXTICR4_EXTI15 ((uint16_t)0xF000) /*!< EXTI 15 configuration */
+
+/**
+ * @brief EXTI12 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI12_PA ((uint16_t)0x0000) /*!< PA[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PB ((uint16_t)0x0001) /*!< PB[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PC ((uint16_t)0x0002) /*!< PC[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PD ((uint16_t)0x0003) /*!< PD[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PE ((uint16_t)0x0004) /*!< PE[12] pin */
+
+/**
+ * @brief EXTI13 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI13_PA ((uint16_t)0x0000) /*!< PA[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PB ((uint16_t)0x0010) /*!< PB[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PC ((uint16_t)0x0020) /*!< PC[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PD ((uint16_t)0x0030) /*!< PD[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PE ((uint16_t)0x0040) /*!< PE[13] pin */
+
+/**
+ * @brief EXTI14 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI14_PA ((uint16_t)0x0000) /*!< PA[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PB ((uint16_t)0x0100) /*!< PB[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PC ((uint16_t)0x0200) /*!< PC[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PD ((uint16_t)0x0300) /*!< PD[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PE ((uint16_t)0x0400) /*!< PE[14] pin */
+
+/**
+ * @brief EXTI15 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI15_PA ((uint16_t)0x0000) /*!< PA[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PB ((uint16_t)0x1000) /*!< PB[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PC ((uint16_t)0x2000) /*!< PC[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PD ((uint16_t)0x3000) /*!< PD[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PE ((uint16_t)0x4000) /*!< PE[15] pin */
+
+/***************** Bit definition for SYSCFG_CFGR2 register ****************/
+#define SYSCFG_CFGR2_LOCKUP_LOCK ((uint32_t)0x00000001) /*!< Enables and locks the LOCKUP (Hardfault) output of CortexM0 with Break Input of TIMER1 */
+#define SYSCFG_CFGR2_SRAM_PARITY_LOCK ((uint32_t)0x00000002) /*!< Enables and locks the SRAM_PARITY error signal with Break Input of TIMER1 */
+#define SYSCFG_CFGR2_PVD_LOCK ((uint32_t)0x00000004) /*!< Enables and locks the PVD connection with Timer1 Break Input and also the PVD_EN and PVDSEL[2:0] bits of the Power Control Interface */
+#define SYSCFG_CFGR2_SRAM_PEF ((uint32_t)0x00000100) /*!< SRAM Parity error flag */
+#define SYSCFG_CFGR2_SRAM_PE SYSCFG_CFGR2_SRAM_PEF /*!< SRAM Parity error flag (define maintained for legacy purpose) */
+
+/*****************************************************************************/
+/* */
+/* Timers (TIM) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for TIM_CR1 register *******************/
+#define TIM_CR1_CEN ((uint32_t)0x00000001) /*!<Counter enable */
+#define TIM_CR1_UDIS ((uint32_t)0x00000002) /*!<Update disable */
+#define TIM_CR1_URS ((uint32_t)0x00000004) /*!<Update request source */
+#define TIM_CR1_OPM ((uint32_t)0x00000008) /*!<One pulse mode */
+#define TIM_CR1_DIR ((uint32_t)0x00000010) /*!<Direction */
+
+#define TIM_CR1_CMS ((uint32_t)0x00000060) /*!<CMS[1:0] bits (Center-aligned mode selection) */
+#define TIM_CR1_CMS_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define TIM_CR1_CMS_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+
+#define TIM_CR1_ARPE ((uint32_t)0x00000080) /*!<Auto-reload preload enable */
+
+#define TIM_CR1_CKD ((uint32_t)0x00000300) /*!<CKD[1:0] bits (clock division) */
+#define TIM_CR1_CKD_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CR1_CKD_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+/******************* Bit definition for TIM_CR2 register *******************/
+#define TIM_CR2_CCPC ((uint32_t)0x00000001) /*!<Capture/Compare Preloaded Control */
+#define TIM_CR2_CCUS ((uint32_t)0x00000004) /*!<Capture/Compare Control Update Selection */
+#define TIM_CR2_CCDS ((uint32_t)0x00000008) /*!<Capture/Compare DMA Selection */
+
+#define TIM_CR2_MMS ((uint32_t)0x00000070) /*!<MMS[2:0] bits (Master Mode Selection) */
+#define TIM_CR2_MMS_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CR2_MMS_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CR2_MMS_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CR2_TI1S ((uint32_t)0x00000080) /*!<TI1 Selection */
+#define TIM_CR2_OIS1 ((uint32_t)0x00000100) /*!<Output Idle state 1 (OC1 output) */
+#define TIM_CR2_OIS1N ((uint32_t)0x00000200) /*!<Output Idle state 1 (OC1N output) */
+#define TIM_CR2_OIS2 ((uint32_t)0x00000400) /*!<Output Idle state 2 (OC2 output) */
+#define TIM_CR2_OIS2N ((uint32_t)0x00000800) /*!<Output Idle state 2 (OC2N output) */
+#define TIM_CR2_OIS3 ((uint32_t)0x00001000) /*!<Output Idle state 3 (OC3 output) */
+#define TIM_CR2_OIS3N ((uint32_t)0x00002000) /*!<Output Idle state 3 (OC3N output) */
+#define TIM_CR2_OIS4 ((uint32_t)0x00004000) /*!<Output Idle state 4 (OC4 output) */
+
+/******************* Bit definition for TIM_SMCR register ******************/
+#define TIM_SMCR_SMS ((uint32_t)0x00000007) /*!<SMS[2:0] bits (Slave mode selection) */
+#define TIM_SMCR_SMS_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_SMCR_SMS_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_SMCR_SMS_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+
+#define TIM_SMCR_OCCS ((uint32_t)0x00000008) /*!< OCREF clear selection */
+
+#define TIM_SMCR_TS ((uint32_t)0x00000070) /*!<TS[2:0] bits (Trigger selection) */
+#define TIM_SMCR_TS_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_SMCR_TS_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_SMCR_TS_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_SMCR_MSM ((uint32_t)0x00000080) /*!<Master/slave mode */
+
+#define TIM_SMCR_ETF ((uint32_t)0x00000F00) /*!<ETF[3:0] bits (External trigger filter) */
+#define TIM_SMCR_ETF_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_SMCR_ETF_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define TIM_SMCR_ETF_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define TIM_SMCR_ETF_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+
+#define TIM_SMCR_ETPS ((uint32_t)0x00003000) /*!<ETPS[1:0] bits (External trigger prescaler) */
+#define TIM_SMCR_ETPS_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_SMCR_ETPS_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+
+#define TIM_SMCR_ECE ((uint32_t)0x00004000) /*!<External clock enable */
+#define TIM_SMCR_ETP ((uint32_t)0x00008000) /*!<External trigger polarity */
+
+/******************* Bit definition for TIM_DIER register ******************/
+#define TIM_DIER_UIE ((uint32_t)0x00000001) /*!<Update interrupt enable */
+#define TIM_DIER_CC1IE ((uint32_t)0x00000002) /*!<Capture/Compare 1 interrupt enable */
+#define TIM_DIER_CC2IE ((uint32_t)0x00000004) /*!<Capture/Compare 2 interrupt enable */
+#define TIM_DIER_CC3IE ((uint32_t)0x00000008) /*!<Capture/Compare 3 interrupt enable */
+#define TIM_DIER_CC4IE ((uint32_t)0x00000010) /*!<Capture/Compare 4 interrupt enable */
+#define TIM_DIER_COMIE ((uint32_t)0x00000020) /*!<COM interrupt enable */
+#define TIM_DIER_TIE ((uint32_t)0x00000040) /*!<Trigger interrupt enable */
+#define TIM_DIER_BIE ((uint32_t)0x00000080) /*!<Break interrupt enable */
+#define TIM_DIER_UDE ((uint32_t)0x00000100) /*!<Update DMA request enable */
+#define TIM_DIER_CC1DE ((uint32_t)0x00000200) /*!<Capture/Compare 1 DMA request enable */
+#define TIM_DIER_CC2DE ((uint32_t)0x00000400) /*!<Capture/Compare 2 DMA request enable */
+#define TIM_DIER_CC3DE ((uint32_t)0x00000800) /*!<Capture/Compare 3 DMA request enable */
+#define TIM_DIER_CC4DE ((uint32_t)0x00001000) /*!<Capture/Compare 4 DMA request enable */
+#define TIM_DIER_COMDE ((uint32_t)0x00002000) /*!<COM DMA request enable */
+#define TIM_DIER_TDE ((uint32_t)0x00004000) /*!<Trigger DMA request enable */
+
+/******************** Bit definition for TIM_SR register *******************/
+#define TIM_SR_UIF ((uint32_t)0x00000001) /*!<Update interrupt Flag */
+#define TIM_SR_CC1IF ((uint32_t)0x00000002) /*!<Capture/Compare 1 interrupt Flag */
+#define TIM_SR_CC2IF ((uint32_t)0x00000004) /*!<Capture/Compare 2 interrupt Flag */
+#define TIM_SR_CC3IF ((uint32_t)0x00000008) /*!<Capture/Compare 3 interrupt Flag */
+#define TIM_SR_CC4IF ((uint32_t)0x00000010) /*!<Capture/Compare 4 interrupt Flag */
+#define TIM_SR_COMIF ((uint32_t)0x00000020) /*!<COM interrupt Flag */
+#define TIM_SR_TIF ((uint32_t)0x00000040) /*!<Trigger interrupt Flag */
+#define TIM_SR_BIF ((uint32_t)0x00000080) /*!<Break interrupt Flag */
+#define TIM_SR_CC1OF ((uint32_t)0x00000200) /*!<Capture/Compare 1 Overcapture Flag */
+#define TIM_SR_CC2OF ((uint32_t)0x00000400) /*!<Capture/Compare 2 Overcapture Flag */
+#define TIM_SR_CC3OF ((uint32_t)0x00000800) /*!<Capture/Compare 3 Overcapture Flag */
+#define TIM_SR_CC4OF ((uint32_t)0x00001000) /*!<Capture/Compare 4 Overcapture Flag */
+
+/******************* Bit definition for TIM_EGR register *******************/
+#define TIM_EGR_UG ((uint32_t)0x00000001) /*!<Update Generation */
+#define TIM_EGR_CC1G ((uint32_t)0x00000002) /*!<Capture/Compare 1 Generation */
+#define TIM_EGR_CC2G ((uint32_t)0x00000004) /*!<Capture/Compare 2 Generation */
+#define TIM_EGR_CC3G ((uint32_t)0x00000008) /*!<Capture/Compare 3 Generation */
+#define TIM_EGR_CC4G ((uint32_t)0x00000010) /*!<Capture/Compare 4 Generation */
+#define TIM_EGR_COMG ((uint32_t)0x00000020) /*!<Capture/Compare Control Update Generation */
+#define TIM_EGR_TG ((uint32_t)0x00000040) /*!<Trigger Generation */
+#define TIM_EGR_BG ((uint32_t)0x00000080) /*!<Break Generation */
+
+/****************** Bit definition for TIM_CCMR1 register ******************/
+#define TIM_CCMR1_CC1S ((uint32_t)0x00000003) /*!<CC1S[1:0] bits (Capture/Compare 1 Selection) */
+#define TIM_CCMR1_CC1S_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_CCMR1_CC1S_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC1FE ((uint32_t)0x00000004) /*!<Output Compare 1 Fast enable */
+#define TIM_CCMR1_OC1PE ((uint32_t)0x00000008) /*!<Output Compare 1 Preload enable */
+
+#define TIM_CCMR1_OC1M ((uint32_t)0x00000070) /*!<OC1M[2:0] bits (Output Compare 1 Mode) */
+#define TIM_CCMR1_OC1M_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR1_OC1M_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR1_OC1M_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CCMR1_OC1CE ((uint32_t)0x00000080) /*!<Output Compare 1Clear Enable */
+
+#define TIM_CCMR1_CC2S ((uint32_t)0x00000300) /*!<CC2S[1:0] bits (Capture/Compare 2 Selection) */
+#define TIM_CCMR1_CC2S_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CCMR1_CC2S_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC2FE ((uint32_t)0x00000400) /*!<Output Compare 2 Fast enable */
+#define TIM_CCMR1_OC2PE ((uint32_t)0x00000800) /*!<Output Compare 2 Preload enable */
+
+#define TIM_CCMR1_OC2M ((uint32_t)0x00007000) /*!<OC2M[2:0] bits (Output Compare 2 Mode) */
+#define TIM_CCMR1_OC2M_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR1_OC2M_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR1_OC2M_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+
+#define TIM_CCMR1_OC2CE ((uint32_t)0x00008000) /*!<Output Compare 2 Clear Enable */
+
+/*---------------------------------------------------------------------------*/
+
+#define TIM_CCMR1_IC1PSC ((uint32_t)0x0000000C) /*!<IC1PSC[1:0] bits (Input Capture 1 Prescaler) */
+#define TIM_CCMR1_IC1PSC_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define TIM_CCMR1_IC1PSC_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC1F ((uint32_t)0x000000F0) /*!<IC1F[3:0] bits (Input Capture 1 Filter) */
+#define TIM_CCMR1_IC1F_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR1_IC1F_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR1_IC1F_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define TIM_CCMR1_IC1F_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define TIM_CCMR1_IC2PSC ((uint32_t)0x00000C00) /*!<IC2PSC[1:0] bits (Input Capture 2 Prescaler) */
+#define TIM_CCMR1_IC2PSC_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define TIM_CCMR1_IC2PSC_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC2F ((uint32_t)0x0000F000) /*!<IC2F[3:0] bits (Input Capture 2 Filter) */
+#define TIM_CCMR1_IC2F_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR1_IC2F_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR1_IC2F_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define TIM_CCMR1_IC2F_3 ((uint32_t)0x00008000) /*!<Bit 3 */
+
+/****************** Bit definition for TIM_CCMR2 register ******************/
+#define TIM_CCMR2_CC3S ((uint32_t)0x00000003) /*!<CC3S[1:0] bits (Capture/Compare 3 Selection) */
+#define TIM_CCMR2_CC3S_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_CCMR2_CC3S_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC3FE ((uint32_t)0x00000004) /*!<Output Compare 3 Fast enable */
+#define TIM_CCMR2_OC3PE ((uint32_t)0x00000008) /*!<Output Compare 3 Preload enable */
+
+#define TIM_CCMR2_OC3M ((uint32_t)0x00000070) /*!<OC3M[2:0] bits (Output Compare 3 Mode) */
+#define TIM_CCMR2_OC3M_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR2_OC3M_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR2_OC3M_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CCMR2_OC3CE ((uint32_t)0x00000080) /*!<Output Compare 3 Clear Enable */
+
+#define TIM_CCMR2_CC4S ((uint32_t)0x00000300) /*!<CC4S[1:0] bits (Capture/Compare 4 Selection) */
+#define TIM_CCMR2_CC4S_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CCMR2_CC4S_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC4FE ((uint32_t)0x00000400) /*!<Output Compare 4 Fast enable */
+#define TIM_CCMR2_OC4PE ((uint32_t)0x00000800) /*!<Output Compare 4 Preload enable */
+
+#define TIM_CCMR2_OC4M ((uint32_t)0x00007000) /*!<OC4M[2:0] bits (Output Compare 4 Mode) */
+#define TIM_CCMR2_OC4M_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR2_OC4M_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR2_OC4M_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+
+#define TIM_CCMR2_OC4CE ((uint32_t)0x00008000) /*!<Output Compare 4 Clear Enable */
+
+/*---------------------------------------------------------------------------*/
+
+#define TIM_CCMR2_IC3PSC ((uint32_t)0x0000000C) /*!<IC3PSC[1:0] bits (Input Capture 3 Prescaler) */
+#define TIM_CCMR2_IC3PSC_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define TIM_CCMR2_IC3PSC_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC3F ((uint32_t)0x000000F0) /*!<IC3F[3:0] bits (Input Capture 3 Filter) */
+#define TIM_CCMR2_IC3F_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR2_IC3F_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR2_IC3F_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define TIM_CCMR2_IC3F_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define TIM_CCMR2_IC4PSC ((uint32_t)0x00000C00) /*!<IC4PSC[1:0] bits (Input Capture 4 Prescaler) */
+#define TIM_CCMR2_IC4PSC_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define TIM_CCMR2_IC4PSC_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC4F ((uint32_t)0x0000F000) /*!<IC4F[3:0] bits (Input Capture 4 Filter) */
+#define TIM_CCMR2_IC4F_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR2_IC4F_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR2_IC4F_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define TIM_CCMR2_IC4F_3 ((uint32_t)0x00008000) /*!<Bit 3 */
+
+/******************* Bit definition for TIM_CCER register ******************/
+#define TIM_CCER_CC1E ((uint32_t)0x00000001) /*!<Capture/Compare 1 output enable */
+#define TIM_CCER_CC1P ((uint32_t)0x00000002) /*!<Capture/Compare 1 output Polarity */
+#define TIM_CCER_CC1NE ((uint32_t)0x00000004) /*!<Capture/Compare 1 Complementary output enable */
+#define TIM_CCER_CC1NP ((uint32_t)0x00000008) /*!<Capture/Compare 1 Complementary output Polarity */
+#define TIM_CCER_CC2E ((uint32_t)0x00000010) /*!<Capture/Compare 2 output enable */
+#define TIM_CCER_CC2P ((uint32_t)0x00000020) /*!<Capture/Compare 2 output Polarity */
+#define TIM_CCER_CC2NE ((uint32_t)0x00000040) /*!<Capture/Compare 2 Complementary output enable */
+#define TIM_CCER_CC2NP ((uint32_t)0x00000080) /*!<Capture/Compare 2 Complementary output Polarity */
+#define TIM_CCER_CC3E ((uint32_t)0x00000100) /*!<Capture/Compare 3 output enable */
+#define TIM_CCER_CC3P ((uint32_t)0x00000200) /*!<Capture/Compare 3 output Polarity */
+#define TIM_CCER_CC3NE ((uint32_t)0x00000400) /*!<Capture/Compare 3 Complementary output enable */
+#define TIM_CCER_CC3NP ((uint32_t)0x00000800) /*!<Capture/Compare 3 Complementary output Polarity */
+#define TIM_CCER_CC4E ((uint32_t)0x00001000) /*!<Capture/Compare 4 output enable */
+#define TIM_CCER_CC4P ((uint32_t)0x00002000) /*!<Capture/Compare 4 output Polarity */
+#define TIM_CCER_CC4NP ((uint32_t)0x00008000) /*!<Capture/Compare 4 Complementary output Polarity */
+
+/******************* Bit definition for TIM_CNT register *******************/
+#define TIM_CNT_CNT ((uint32_t)0xFFFFFFFF) /*!<Counter Value */
+
+/******************* Bit definition for TIM_PSC register *******************/
+#define TIM_PSC_PSC ((uint32_t)0x0000FFFF) /*!<Prescaler Value */
+
+/******************* Bit definition for TIM_ARR register *******************/
+#define TIM_ARR_ARR ((uint32_t)0xFFFFFFFF) /*!<actual auto-reload Value */
+
+/******************* Bit definition for TIM_RCR register *******************/
+#define TIM_RCR_REP ((uint32_t)0x000000FF) /*!<Repetition Counter Value */
+
+/******************* Bit definition for TIM_CCR1 register ******************/
+#define TIM_CCR1_CCR1 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 1 Value */
+
+/******************* Bit definition for TIM_CCR2 register ******************/
+#define TIM_CCR2_CCR2 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 2 Value */
+
+/******************* Bit definition for TIM_CCR3 register ******************/
+#define TIM_CCR3_CCR3 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 3 Value */
+
+/******************* Bit definition for TIM_CCR4 register ******************/
+#define TIM_CCR4_CCR4 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 4 Value */
+
+/******************* Bit definition for TIM_BDTR register ******************/
+#define TIM_BDTR_DTG ((uint32_t)0x000000FF) /*!<DTG[0:7] bits (Dead-Time Generator set-up) */
+#define TIM_BDTR_DTG_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_BDTR_DTG_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_BDTR_DTG_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define TIM_BDTR_DTG_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define TIM_BDTR_DTG_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define TIM_BDTR_DTG_5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define TIM_BDTR_DTG_6 ((uint32_t)0x00000040) /*!<Bit 6 */
+#define TIM_BDTR_DTG_7 ((uint32_t)0x00000080) /*!<Bit 7 */
+
+#define TIM_BDTR_LOCK ((uint32_t)0x00000300) /*!<LOCK[1:0] bits (Lock Configuration) */
+#define TIM_BDTR_LOCK_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_BDTR_LOCK_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_BDTR_OSSI ((uint32_t)0x00000400) /*!<Off-State Selection for Idle mode */
+#define TIM_BDTR_OSSR ((uint32_t)0x00000800) /*!<Off-State Selection for Run mode */
+#define TIM_BDTR_BKE ((uint32_t)0x00001000) /*!<Break enable */
+#define TIM_BDTR_BKP ((uint32_t)0x00002000) /*!<Break Polarity */
+#define TIM_BDTR_AOE ((uint32_t)0x00004000) /*!<Automatic Output enable */
+#define TIM_BDTR_MOE ((uint32_t)0x00008000) /*!<Main Output enable */
+
+/******************* Bit definition for TIM_DCR register *******************/
+#define TIM_DCR_DBA ((uint32_t)0x0000001F) /*!<DBA[4:0] bits (DMA Base Address) */
+#define TIM_DCR_DBA_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_DCR_DBA_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_DCR_DBA_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define TIM_DCR_DBA_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define TIM_DCR_DBA_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+
+#define TIM_DCR_DBL ((uint32_t)0x00001F00) /*!<DBL[4:0] bits (DMA Burst Length) */
+#define TIM_DCR_DBL_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_DCR_DBL_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define TIM_DCR_DBL_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define TIM_DCR_DBL_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define TIM_DCR_DBL_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+
+/******************* Bit definition for TIM_DMAR register ******************/
+#define TIM_DMAR_DMAB ((uint32_t)0x0000FFFF) /*!<DMA register for burst accesses */
+
+/******************* Bit definition for TIM14_OR register ********************/
+#define TIM14_OR_TI1_RMP ((uint32_t)0x00000003) /*!<TI1_RMP[1:0] bits (TIM14 Input 4 remap) */
+#define TIM14_OR_TI1_RMP_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM14_OR_TI1_RMP_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+/******************************************************************************/
+/* */
+/* Touch Sensing Controller (TSC) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for TSC_CR register *********************/
+#define TSC_CR_TSCE ((uint32_t)0x00000001) /*!<Touch sensing controller enable */
+#define TSC_CR_START ((uint32_t)0x00000002) /*!<Start acquisition */
+#define TSC_CR_AM ((uint32_t)0x00000004) /*!<Acquisition mode */
+#define TSC_CR_SYNCPOL ((uint32_t)0x00000008) /*!<Synchronization pin polarity */
+#define TSC_CR_IODEF ((uint32_t)0x00000010) /*!<IO default mode */
+
+#define TSC_CR_MCV ((uint32_t)0x000000E0) /*!<MCV[2:0] bits (Max Count Value) */
+#define TSC_CR_MCV_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define TSC_CR_MCV_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+#define TSC_CR_MCV_2 ((uint32_t)0x00000080) /*!<Bit 2 */
+
+#define TSC_CR_PGPSC ((uint32_t)0x00007000) /*!<PGPSC[2:0] bits (Pulse Generator Prescaler) */
+#define TSC_CR_PGPSC_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TSC_CR_PGPSC_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TSC_CR_PGPSC_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+
+#define TSC_CR_SSPSC ((uint32_t)0x00008000) /*!<Spread Spectrum Prescaler */
+#define TSC_CR_SSE ((uint32_t)0x00010000) /*!<Spread Spectrum Enable */
+
+#define TSC_CR_SSD ((uint32_t)0x00FE0000) /*!<SSD[6:0] bits (Spread Spectrum Deviation) */
+#define TSC_CR_SSD_0 ((uint32_t)0x00020000) /*!<Bit 0 */
+#define TSC_CR_SSD_1 ((uint32_t)0x00040000) /*!<Bit 1 */
+#define TSC_CR_SSD_2 ((uint32_t)0x00080000) /*!<Bit 2 */
+#define TSC_CR_SSD_3 ((uint32_t)0x00100000) /*!<Bit 3 */
+#define TSC_CR_SSD_4 ((uint32_t)0x00200000) /*!<Bit 4 */
+#define TSC_CR_SSD_5 ((uint32_t)0x00400000) /*!<Bit 5 */
+#define TSC_CR_SSD_6 ((uint32_t)0x00800000) /*!<Bit 6 */
+
+#define TSC_CR_CTPL ((uint32_t)0x0F000000) /*!<CTPL[3:0] bits (Charge Transfer pulse low) */
+#define TSC_CR_CTPL_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define TSC_CR_CTPL_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define TSC_CR_CTPL_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define TSC_CR_CTPL_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+
+#define TSC_CR_CTPH ((uint32_t)0xF0000000) /*!<CTPH[3:0] bits (Charge Transfer pulse high) */
+#define TSC_CR_CTPH_0 ((uint32_t)0x10000000) /*!<Bit 0 */
+#define TSC_CR_CTPH_1 ((uint32_t)0x20000000) /*!<Bit 1 */
+#define TSC_CR_CTPH_2 ((uint32_t)0x40000000) /*!<Bit 2 */
+#define TSC_CR_CTPH_3 ((uint32_t)0x80000000) /*!<Bit 3 */
+
+/******************* Bit definition for TSC_IER register ********************/
+#define TSC_IER_EOAIE ((uint32_t)0x00000001) /*!<End of acquisition interrupt enable */
+#define TSC_IER_MCEIE ((uint32_t)0x00000002) /*!<Max count error interrupt enable */
+
+/******************* Bit definition for TSC_ICR register ********************/
+#define TSC_ICR_EOAIC ((uint32_t)0x00000001) /*!<End of acquisition interrupt clear */
+#define TSC_ICR_MCEIC ((uint32_t)0x00000002) /*!<Max count error interrupt clear */
+
+/******************* Bit definition for TSC_ISR register ********************/
+#define TSC_ISR_EOAF ((uint32_t)0x00000001) /*!<End of acquisition flag */
+#define TSC_ISR_MCEF ((uint32_t)0x00000002) /*!<Max count error flag */
+
+/******************* Bit definition for TSC_IOHCR register ******************/
+#define TSC_IOHCR_G1_IO1 ((uint32_t)0x00000001) /*!<GROUP1_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G1_IO2 ((uint32_t)0x00000002) /*!<GROUP1_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G1_IO3 ((uint32_t)0x00000004) /*!<GROUP1_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G1_IO4 ((uint32_t)0x00000008) /*!<GROUP1_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G2_IO1 ((uint32_t)0x00000010) /*!<GROUP2_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G2_IO2 ((uint32_t)0x00000020) /*!<GROUP2_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G2_IO3 ((uint32_t)0x00000040) /*!<GROUP2_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G2_IO4 ((uint32_t)0x00000080) /*!<GROUP2_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G3_IO1 ((uint32_t)0x00000100) /*!<GROUP3_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G3_IO2 ((uint32_t)0x00000200) /*!<GROUP3_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G3_IO3 ((uint32_t)0x00000400) /*!<GROUP3_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G3_IO4 ((uint32_t)0x00000800) /*!<GROUP3_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G4_IO1 ((uint32_t)0x00001000) /*!<GROUP4_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G4_IO2 ((uint32_t)0x00002000) /*!<GROUP4_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G4_IO3 ((uint32_t)0x00004000) /*!<GROUP4_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G4_IO4 ((uint32_t)0x00008000) /*!<GROUP4_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G5_IO1 ((uint32_t)0x00010000) /*!<GROUP5_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G5_IO2 ((uint32_t)0x00020000) /*!<GROUP5_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G5_IO3 ((uint32_t)0x00040000) /*!<GROUP5_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G5_IO4 ((uint32_t)0x00080000) /*!<GROUP5_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G6_IO1 ((uint32_t)0x00100000) /*!<GROUP6_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G6_IO2 ((uint32_t)0x00200000) /*!<GROUP6_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G6_IO3 ((uint32_t)0x00400000) /*!<GROUP6_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G6_IO4 ((uint32_t)0x00800000) /*!<GROUP6_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G7_IO1 ((uint32_t)0x01000000) /*!<GROUP7_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G7_IO2 ((uint32_t)0x02000000) /*!<GROUP7_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G7_IO3 ((uint32_t)0x04000000) /*!<GROUP7_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G7_IO4 ((uint32_t)0x08000000) /*!<GROUP7_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G8_IO1 ((uint32_t)0x10000000) /*!<GROUP8_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G8_IO2 ((uint32_t)0x20000000) /*!<GROUP8_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G8_IO3 ((uint32_t)0x40000000) /*!<GROUP8_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G8_IO4 ((uint32_t)0x80000000) /*!<GROUP8_IO4 schmitt trigger hysteresis mode */
+
+/******************* Bit definition for TSC_IOASCR register *****************/
+#define TSC_IOASCR_G1_IO1 ((uint32_t)0x00000001) /*!<GROUP1_IO1 analog switch enable */
+#define TSC_IOASCR_G1_IO2 ((uint32_t)0x00000002) /*!<GROUP1_IO2 analog switch enable */
+#define TSC_IOASCR_G1_IO3 ((uint32_t)0x00000004) /*!<GROUP1_IO3 analog switch enable */
+#define TSC_IOASCR_G1_IO4 ((uint32_t)0x00000008) /*!<GROUP1_IO4 analog switch enable */
+#define TSC_IOASCR_G2_IO1 ((uint32_t)0x00000010) /*!<GROUP2_IO1 analog switch enable */
+#define TSC_IOASCR_G2_IO2 ((uint32_t)0x00000020) /*!<GROUP2_IO2 analog switch enable */
+#define TSC_IOASCR_G2_IO3 ((uint32_t)0x00000040) /*!<GROUP2_IO3 analog switch enable */
+#define TSC_IOASCR_G2_IO4 ((uint32_t)0x00000080) /*!<GROUP2_IO4 analog switch enable */
+#define TSC_IOASCR_G3_IO1 ((uint32_t)0x00000100) /*!<GROUP3_IO1 analog switch enable */
+#define TSC_IOASCR_G3_IO2 ((uint32_t)0x00000200) /*!<GROUP3_IO2 analog switch enable */
+#define TSC_IOASCR_G3_IO3 ((uint32_t)0x00000400) /*!<GROUP3_IO3 analog switch enable */
+#define TSC_IOASCR_G3_IO4 ((uint32_t)0x00000800) /*!<GROUP3_IO4 analog switch enable */
+#define TSC_IOASCR_G4_IO1 ((uint32_t)0x00001000) /*!<GROUP4_IO1 analog switch enable */
+#define TSC_IOASCR_G4_IO2 ((uint32_t)0x00002000) /*!<GROUP4_IO2 analog switch enable */
+#define TSC_IOASCR_G4_IO3 ((uint32_t)0x00004000) /*!<GROUP4_IO3 analog switch enable */
+#define TSC_IOASCR_G4_IO4 ((uint32_t)0x00008000) /*!<GROUP4_IO4 analog switch enable */
+#define TSC_IOASCR_G5_IO1 ((uint32_t)0x00010000) /*!<GROUP5_IO1 analog switch enable */
+#define TSC_IOASCR_G5_IO2 ((uint32_t)0x00020000) /*!<GROUP5_IO2 analog switch enable */
+#define TSC_IOASCR_G5_IO3 ((uint32_t)0x00040000) /*!<GROUP5_IO3 analog switch enable */
+#define TSC_IOASCR_G5_IO4 ((uint32_t)0x00080000) /*!<GROUP5_IO4 analog switch enable */
+#define TSC_IOASCR_G6_IO1 ((uint32_t)0x00100000) /*!<GROUP6_IO1 analog switch enable */
+#define TSC_IOASCR_G6_IO2 ((uint32_t)0x00200000) /*!<GROUP6_IO2 analog switch enable */
+#define TSC_IOASCR_G6_IO3 ((uint32_t)0x00400000) /*!<GROUP6_IO3 analog switch enable */
+#define TSC_IOASCR_G6_IO4 ((uint32_t)0x00800000) /*!<GROUP6_IO4 analog switch enable */
+#define TSC_IOASCR_G7_IO1 ((uint32_t)0x01000000) /*!<GROUP7_IO1 analog switch enable */
+#define TSC_IOASCR_G7_IO2 ((uint32_t)0x02000000) /*!<GROUP7_IO2 analog switch enable */
+#define TSC_IOASCR_G7_IO3 ((uint32_t)0x04000000) /*!<GROUP7_IO3 analog switch enable */
+#define TSC_IOASCR_G7_IO4 ((uint32_t)0x08000000) /*!<GROUP7_IO4 analog switch enable */
+#define TSC_IOASCR_G8_IO1 ((uint32_t)0x10000000) /*!<GROUP8_IO1 analog switch enable */
+#define TSC_IOASCR_G8_IO2 ((uint32_t)0x20000000) /*!<GROUP8_IO2 analog switch enable */
+#define TSC_IOASCR_G8_IO3 ((uint32_t)0x40000000) /*!<GROUP8_IO3 analog switch enable */
+#define TSC_IOASCR_G8_IO4 ((uint32_t)0x80000000) /*!<GROUP8_IO4 analog switch enable */
+
+/******************* Bit definition for TSC_IOSCR register ******************/
+#define TSC_IOSCR_G1_IO1 ((uint32_t)0x00000001) /*!<GROUP1_IO1 sampling mode */
+#define TSC_IOSCR_G1_IO2 ((uint32_t)0x00000002) /*!<GROUP1_IO2 sampling mode */
+#define TSC_IOSCR_G1_IO3 ((uint32_t)0x00000004) /*!<GROUP1_IO3 sampling mode */
+#define TSC_IOSCR_G1_IO4 ((uint32_t)0x00000008) /*!<GROUP1_IO4 sampling mode */
+#define TSC_IOSCR_G2_IO1 ((uint32_t)0x00000010) /*!<GROUP2_IO1 sampling mode */
+#define TSC_IOSCR_G2_IO2 ((uint32_t)0x00000020) /*!<GROUP2_IO2 sampling mode */
+#define TSC_IOSCR_G2_IO3 ((uint32_t)0x00000040) /*!<GROUP2_IO3 sampling mode */
+#define TSC_IOSCR_G2_IO4 ((uint32_t)0x00000080) /*!<GROUP2_IO4 sampling mode */
+#define TSC_IOSCR_G3_IO1 ((uint32_t)0x00000100) /*!<GROUP3_IO1 sampling mode */
+#define TSC_IOSCR_G3_IO2 ((uint32_t)0x00000200) /*!<GROUP3_IO2 sampling mode */
+#define TSC_IOSCR_G3_IO3 ((uint32_t)0x00000400) /*!<GROUP3_IO3 sampling mode */
+#define TSC_IOSCR_G3_IO4 ((uint32_t)0x00000800) /*!<GROUP3_IO4 sampling mode */
+#define TSC_IOSCR_G4_IO1 ((uint32_t)0x00001000) /*!<GROUP4_IO1 sampling mode */
+#define TSC_IOSCR_G4_IO2 ((uint32_t)0x00002000) /*!<GROUP4_IO2 sampling mode */
+#define TSC_IOSCR_G4_IO3 ((uint32_t)0x00004000) /*!<GROUP4_IO3 sampling mode */
+#define TSC_IOSCR_G4_IO4 ((uint32_t)0x00008000) /*!<GROUP4_IO4 sampling mode */
+#define TSC_IOSCR_G5_IO1 ((uint32_t)0x00010000) /*!<GROUP5_IO1 sampling mode */
+#define TSC_IOSCR_G5_IO2 ((uint32_t)0x00020000) /*!<GROUP5_IO2 sampling mode */
+#define TSC_IOSCR_G5_IO3 ((uint32_t)0x00040000) /*!<GROUP5_IO3 sampling mode */
+#define TSC_IOSCR_G5_IO4 ((uint32_t)0x00080000) /*!<GROUP5_IO4 sampling mode */
+#define TSC_IOSCR_G6_IO1 ((uint32_t)0x00100000) /*!<GROUP6_IO1 sampling mode */
+#define TSC_IOSCR_G6_IO2 ((uint32_t)0x00200000) /*!<GROUP6_IO2 sampling mode */
+#define TSC_IOSCR_G6_IO3 ((uint32_t)0x00400000) /*!<GROUP6_IO3 sampling mode */
+#define TSC_IOSCR_G6_IO4 ((uint32_t)0x00800000) /*!<GROUP6_IO4 sampling mode */
+#define TSC_IOSCR_G7_IO1 ((uint32_t)0x01000000) /*!<GROUP7_IO1 sampling mode */
+#define TSC_IOSCR_G7_IO2 ((uint32_t)0x02000000) /*!<GROUP7_IO2 sampling mode */
+#define TSC_IOSCR_G7_IO3 ((uint32_t)0x04000000) /*!<GROUP7_IO3 sampling mode */
+#define TSC_IOSCR_G7_IO4 ((uint32_t)0x08000000) /*!<GROUP7_IO4 sampling mode */
+#define TSC_IOSCR_G8_IO1 ((uint32_t)0x10000000) /*!<GROUP8_IO1 sampling mode */
+#define TSC_IOSCR_G8_IO2 ((uint32_t)0x20000000) /*!<GROUP8_IO2 sampling mode */
+#define TSC_IOSCR_G8_IO3 ((uint32_t)0x40000000) /*!<GROUP8_IO3 sampling mode */
+#define TSC_IOSCR_G8_IO4 ((uint32_t)0x80000000) /*!<GROUP8_IO4 sampling mode */
+
+/******************* Bit definition for TSC_IOCCR register ******************/
+#define TSC_IOCCR_G1_IO1 ((uint32_t)0x00000001) /*!<GROUP1_IO1 channel mode */
+#define TSC_IOCCR_G1_IO2 ((uint32_t)0x00000002) /*!<GROUP1_IO2 channel mode */
+#define TSC_IOCCR_G1_IO3 ((uint32_t)0x00000004) /*!<GROUP1_IO3 channel mode */
+#define TSC_IOCCR_G1_IO4 ((uint32_t)0x00000008) /*!<GROUP1_IO4 channel mode */
+#define TSC_IOCCR_G2_IO1 ((uint32_t)0x00000010) /*!<GROUP2_IO1 channel mode */
+#define TSC_IOCCR_G2_IO2 ((uint32_t)0x00000020) /*!<GROUP2_IO2 channel mode */
+#define TSC_IOCCR_G2_IO3 ((uint32_t)0x00000040) /*!<GROUP2_IO3 channel mode */
+#define TSC_IOCCR_G2_IO4 ((uint32_t)0x00000080) /*!<GROUP2_IO4 channel mode */
+#define TSC_IOCCR_G3_IO1 ((uint32_t)0x00000100) /*!<GROUP3_IO1 channel mode */
+#define TSC_IOCCR_G3_IO2 ((uint32_t)0x00000200) /*!<GROUP3_IO2 channel mode */
+#define TSC_IOCCR_G3_IO3 ((uint32_t)0x00000400) /*!<GROUP3_IO3 channel mode */
+#define TSC_IOCCR_G3_IO4 ((uint32_t)0x00000800) /*!<GROUP3_IO4 channel mode */
+#define TSC_IOCCR_G4_IO1 ((uint32_t)0x00001000) /*!<GROUP4_IO1 channel mode */
+#define TSC_IOCCR_G4_IO2 ((uint32_t)0x00002000) /*!<GROUP4_IO2 channel mode */
+#define TSC_IOCCR_G4_IO3 ((uint32_t)0x00004000) /*!<GROUP4_IO3 channel mode */
+#define TSC_IOCCR_G4_IO4 ((uint32_t)0x00008000) /*!<GROUP4_IO4 channel mode */
+#define TSC_IOCCR_G5_IO1 ((uint32_t)0x00010000) /*!<GROUP5_IO1 channel mode */
+#define TSC_IOCCR_G5_IO2 ((uint32_t)0x00020000) /*!<GROUP5_IO2 channel mode */
+#define TSC_IOCCR_G5_IO3 ((uint32_t)0x00040000) /*!<GROUP5_IO3 channel mode */
+#define TSC_IOCCR_G5_IO4 ((uint32_t)0x00080000) /*!<GROUP5_IO4 channel mode */
+#define TSC_IOCCR_G6_IO1 ((uint32_t)0x00100000) /*!<GROUP6_IO1 channel mode */
+#define TSC_IOCCR_G6_IO2 ((uint32_t)0x00200000) /*!<GROUP6_IO2 channel mode */
+#define TSC_IOCCR_G6_IO3 ((uint32_t)0x00400000) /*!<GROUP6_IO3 channel mode */
+#define TSC_IOCCR_G6_IO4 ((uint32_t)0x00800000) /*!<GROUP6_IO4 channel mode */
+#define TSC_IOCCR_G7_IO1 ((uint32_t)0x01000000) /*!<GROUP7_IO1 channel mode */
+#define TSC_IOCCR_G7_IO2 ((uint32_t)0x02000000) /*!<GROUP7_IO2 channel mode */
+#define TSC_IOCCR_G7_IO3 ((uint32_t)0x04000000) /*!<GROUP7_IO3 channel mode */
+#define TSC_IOCCR_G7_IO4 ((uint32_t)0x08000000) /*!<GROUP7_IO4 channel mode */
+#define TSC_IOCCR_G8_IO1 ((uint32_t)0x10000000) /*!<GROUP8_IO1 channel mode */
+#define TSC_IOCCR_G8_IO2 ((uint32_t)0x20000000) /*!<GROUP8_IO2 channel mode */
+#define TSC_IOCCR_G8_IO3 ((uint32_t)0x40000000) /*!<GROUP8_IO3 channel mode */
+#define TSC_IOCCR_G8_IO4 ((uint32_t)0x80000000) /*!<GROUP8_IO4 channel mode */
+
+/******************* Bit definition for TSC_IOGCSR register *****************/
+#define TSC_IOGCSR_G1E ((uint32_t)0x00000001) /*!<Analog IO GROUP1 enable */
+#define TSC_IOGCSR_G2E ((uint32_t)0x00000002) /*!<Analog IO GROUP2 enable */
+#define TSC_IOGCSR_G3E ((uint32_t)0x00000004) /*!<Analog IO GROUP3 enable */
+#define TSC_IOGCSR_G4E ((uint32_t)0x00000008) /*!<Analog IO GROUP4 enable */
+#define TSC_IOGCSR_G5E ((uint32_t)0x00000010) /*!<Analog IO GROUP5 enable */
+#define TSC_IOGCSR_G6E ((uint32_t)0x00000020) /*!<Analog IO GROUP6 enable */
+#define TSC_IOGCSR_G7E ((uint32_t)0x00000040) /*!<Analog IO GROUP7 enable */
+#define TSC_IOGCSR_G8E ((uint32_t)0x00000080) /*!<Analog IO GROUP8 enable */
+#define TSC_IOGCSR_G1S ((uint32_t)0x00010000) /*!<Analog IO GROUP1 status */
+#define TSC_IOGCSR_G2S ((uint32_t)0x00020000) /*!<Analog IO GROUP2 status */
+#define TSC_IOGCSR_G3S ((uint32_t)0x00040000) /*!<Analog IO GROUP3 status */
+#define TSC_IOGCSR_G4S ((uint32_t)0x00080000) /*!<Analog IO GROUP4 status */
+#define TSC_IOGCSR_G5S ((uint32_t)0x00100000) /*!<Analog IO GROUP5 status */
+#define TSC_IOGCSR_G6S ((uint32_t)0x00200000) /*!<Analog IO GROUP6 status */
+#define TSC_IOGCSR_G7S ((uint32_t)0x00400000) /*!<Analog IO GROUP7 status */
+#define TSC_IOGCSR_G8S ((uint32_t)0x00800000) /*!<Analog IO GROUP8 status */
+
+/******************* Bit definition for TSC_IOGXCR register *****************/
+#define TSC_IOGXCR_CNT ((uint32_t)0x00003FFF) /*!<CNT[13:0] bits (Counter value) */
+
+/******************************************************************************/
+/* */
+/* Universal Synchronous Asynchronous Receiver Transmitter (USART) */
+/* */
+/******************************************************************************/
+/****************** Bit definition for USART_CR1 register *******************/
+#define USART_CR1_UE ((uint32_t)0x00000001) /*!< USART Enable */
+#define USART_CR1_UESM ((uint32_t)0x00000002) /*!< USART Enable in STOP Mode */
+#define USART_CR1_RE ((uint32_t)0x00000004) /*!< Receiver Enable */
+#define USART_CR1_TE ((uint32_t)0x00000008) /*!< Transmitter Enable */
+#define USART_CR1_IDLEIE ((uint32_t)0x00000010) /*!< IDLE Interrupt Enable */
+#define USART_CR1_RXNEIE ((uint32_t)0x00000020) /*!< RXNE Interrupt Enable */
+#define USART_CR1_TCIE ((uint32_t)0x00000040) /*!< Transmission Complete Interrupt Enable */
+#define USART_CR1_TXEIE ((uint32_t)0x00000080) /*!< TXE Interrupt Enable */
+#define USART_CR1_PEIE ((uint32_t)0x00000100) /*!< PE Interrupt Enable */
+#define USART_CR1_PS ((uint32_t)0x00000200) /*!< Parity Selection */
+#define USART_CR1_PCE ((uint32_t)0x00000400) /*!< Parity Control Enable */
+#define USART_CR1_WAKE ((uint32_t)0x00000800) /*!< Receiver Wakeup method */
+#define USART_CR1_M0 ((uint32_t)0x00001000) /*!< Word length bit 0 */
+#define USART_CR1_MME ((uint32_t)0x00002000) /*!< Mute Mode Enable */
+#define USART_CR1_CMIE ((uint32_t)0x00004000) /*!< Character match interrupt enable */
+#define USART_CR1_OVER8 ((uint32_t)0x00008000) /*!< Oversampling by 8-bit or 16-bit mode */
+#define USART_CR1_DEDT ((uint32_t)0x001F0000) /*!< DEDT[4:0] bits (Driver Enable Deassertion Time) */
+#define USART_CR1_DEDT_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define USART_CR1_DEDT_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define USART_CR1_DEDT_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define USART_CR1_DEDT_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+#define USART_CR1_DEDT_4 ((uint32_t)0x00100000) /*!< Bit 4 */
+#define USART_CR1_DEAT ((uint32_t)0x03E00000) /*!< DEAT[4:0] bits (Driver Enable Assertion Time) */
+#define USART_CR1_DEAT_0 ((uint32_t)0x00200000) /*!< Bit 0 */
+#define USART_CR1_DEAT_1 ((uint32_t)0x00400000) /*!< Bit 1 */
+#define USART_CR1_DEAT_2 ((uint32_t)0x00800000) /*!< Bit 2 */
+#define USART_CR1_DEAT_3 ((uint32_t)0x01000000) /*!< Bit 3 */
+#define USART_CR1_DEAT_4 ((uint32_t)0x02000000) /*!< Bit 4 */
+#define USART_CR1_RTOIE ((uint32_t)0x04000000) /*!< Receive Time Out interrupt enable */
+#define USART_CR1_EOBIE ((uint32_t)0x08000000) /*!< End of Block interrupt enable */
+#define USART_CR1_M1 ((uint32_t)0x10000000) /*!< Word length bit 1 */
+#define USART_CR1_M ((uint32_t)0x10001000) /*!< [M1:M0] Word length */
+
+/****************** Bit definition for USART_CR2 register *******************/
+#define USART_CR2_ADDM7 ((uint32_t)0x00000010) /*!< 7-bit or 4-bit Address Detection */
+#define USART_CR2_LBDL ((uint32_t)0x00000020) /*!< LIN Break Detection Length */
+#define USART_CR2_LBDIE ((uint32_t)0x00000040) /*!< LIN Break Detection Interrupt Enable */
+#define USART_CR2_LBCL ((uint32_t)0x00000100) /*!< Last Bit Clock pulse */
+#define USART_CR2_CPHA ((uint32_t)0x00000200) /*!< Clock Phase */
+#define USART_CR2_CPOL ((uint32_t)0x00000400) /*!< Clock Polarity */
+#define USART_CR2_CLKEN ((uint32_t)0x00000800) /*!< Clock Enable */
+#define USART_CR2_STOP ((uint32_t)0x00003000) /*!< STOP[1:0] bits (STOP bits) */
+#define USART_CR2_STOP_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define USART_CR2_STOP_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+#define USART_CR2_LINEN ((uint32_t)0x00004000) /*!< LIN mode enable */
+#define USART_CR2_SWAP ((uint32_t)0x00008000) /*!< SWAP TX/RX pins */
+#define USART_CR2_RXINV ((uint32_t)0x00010000) /*!< RX pin active level inversion */
+#define USART_CR2_TXINV ((uint32_t)0x00020000) /*!< TX pin active level inversion */
+#define USART_CR2_DATAINV ((uint32_t)0x00040000) /*!< Binary data inversion */
+#define USART_CR2_MSBFIRST ((uint32_t)0x00080000) /*!< Most Significant Bit First */
+#define USART_CR2_ABREN ((uint32_t)0x00100000) /*!< Auto Baud-Rate Enable*/
+#define USART_CR2_ABRMODE ((uint32_t)0x00600000) /*!< ABRMOD[1:0] bits (Auto Baud-Rate Mode) */
+#define USART_CR2_ABRMODE_0 ((uint32_t)0x00200000) /*!< Bit 0 */
+#define USART_CR2_ABRMODE_1 ((uint32_t)0x00400000) /*!< Bit 1 */
+#define USART_CR2_RTOEN ((uint32_t)0x00800000) /*!< Receiver Time-Out enable */
+#define USART_CR2_ADD ((uint32_t)0xFF000000) /*!< Address of the USART node */
+
+/****************** Bit definition for USART_CR3 register *******************/
+#define USART_CR3_EIE ((uint32_t)0x00000001) /*!< Error Interrupt Enable */
+#define USART_CR3_IREN ((uint32_t)0x00000002) /*!< IrDA mode Enable */
+#define USART_CR3_IRLP ((uint32_t)0x00000004) /*!< IrDA Low-Power */
+#define USART_CR3_HDSEL ((uint32_t)0x00000008) /*!< Half-Duplex Selection */
+#define USART_CR3_NACK ((uint32_t)0x00000010) /*!< SmartCard NACK enable */
+#define USART_CR3_SCEN ((uint32_t)0x00000020) /*!< SmartCard mode enable */
+#define USART_CR3_DMAR ((uint32_t)0x00000040) /*!< DMA Enable Receiver */
+#define USART_CR3_DMAT ((uint32_t)0x00000080) /*!< DMA Enable Transmitter */
+#define USART_CR3_RTSE ((uint32_t)0x00000100) /*!< RTS Enable */
+#define USART_CR3_CTSE ((uint32_t)0x00000200) /*!< CTS Enable */
+#define USART_CR3_CTSIE ((uint32_t)0x00000400) /*!< CTS Interrupt Enable */
+#define USART_CR3_ONEBIT ((uint32_t)0x00000800) /*!< One sample bit method enable */
+#define USART_CR3_OVRDIS ((uint32_t)0x00001000) /*!< Overrun Disable */
+#define USART_CR3_DDRE ((uint32_t)0x00002000) /*!< DMA Disable on Reception Error */
+#define USART_CR3_DEM ((uint32_t)0x00004000) /*!< Driver Enable Mode */
+#define USART_CR3_DEP ((uint32_t)0x00008000) /*!< Driver Enable Polarity Selection */
+#define USART_CR3_SCARCNT ((uint32_t)0x000E0000) /*!< SCARCNT[2:0] bits (SmartCard Auto-Retry Count) */
+#define USART_CR3_SCARCNT_0 ((uint32_t)0x00020000) /*!< Bit 0 */
+#define USART_CR3_SCARCNT_1 ((uint32_t)0x00040000) /*!< Bit 1 */
+#define USART_CR3_SCARCNT_2 ((uint32_t)0x00080000) /*!< Bit 2 */
+#define USART_CR3_WUS ((uint32_t)0x00300000) /*!< WUS[1:0] bits (Wake UP Interrupt Flag Selection) */
+#define USART_CR3_WUS_0 ((uint32_t)0x00100000) /*!< Bit 0 */
+#define USART_CR3_WUS_1 ((uint32_t)0x00200000) /*!< Bit 1 */
+#define USART_CR3_WUFIE ((uint32_t)0x00400000) /*!< Wake Up Interrupt Enable */
+
+/****************** Bit definition for USART_BRR register *******************/
+#define USART_BRR_DIV_FRACTION ((uint32_t)0x0000000F) /*!< Fraction of USARTDIV */
+#define USART_BRR_DIV_MANTISSA ((uint32_t)0x0000FFF0) /*!< Mantissa of USARTDIV */
+
+/****************** Bit definition for USART_GTPR register ******************/
+#define USART_GTPR_PSC ((uint32_t)0x000000FF) /*!< PSC[7:0] bits (Prescaler value) */
+#define USART_GTPR_GT ((uint32_t)0x0000FF00) /*!< GT[7:0] bits (Guard time value) */
+
+
+/******************* Bit definition for USART_RTOR register *****************/
+#define USART_RTOR_RTO ((uint32_t)0x00FFFFFF) /*!< Receiver Time Out Value */
+#define USART_RTOR_BLEN ((uint32_t)0xFF000000) /*!< Block Length */
+
+/******************* Bit definition for USART_RQR register ******************/
+#define USART_RQR_ABRRQ ((uint32_t)0x00000001) /*!< Auto-Baud Rate Request */
+#define USART_RQR_SBKRQ ((uint32_t)0x00000002) /*!< Send Break Request */
+#define USART_RQR_MMRQ ((uint32_t)0x00000004) /*!< Mute Mode Request */
+#define USART_RQR_RXFRQ ((uint32_t)0x00000008) /*!< Receive Data flush Request */
+#define USART_RQR_TXFRQ ((uint32_t)0x00000010) /*!< Transmit data flush Request */
+
+/******************* Bit definition for USART_ISR register ******************/
+#define USART_ISR_PE ((uint32_t)0x00000001) /*!< Parity Error */
+#define USART_ISR_FE ((uint32_t)0x00000002) /*!< Framing Error */
+#define USART_ISR_NE ((uint32_t)0x00000004) /*!< Noise detected Flag */
+#define USART_ISR_ORE ((uint32_t)0x00000008) /*!< OverRun Error */
+#define USART_ISR_IDLE ((uint32_t)0x00000010) /*!< IDLE line detected */
+#define USART_ISR_RXNE ((uint32_t)0x00000020) /*!< Read Data Register Not Empty */
+#define USART_ISR_TC ((uint32_t)0x00000040) /*!< Transmission Complete */
+#define USART_ISR_TXE ((uint32_t)0x00000080) /*!< Transmit Data Register Empty */
+#define USART_ISR_LBDF ((uint32_t)0x00000100) /*!< LIN Break Detection Flag */
+#define USART_ISR_CTSIF ((uint32_t)0x00000200) /*!< CTS interrupt flag */
+#define USART_ISR_CTS ((uint32_t)0x00000400) /*!< CTS flag */
+#define USART_ISR_RTOF ((uint32_t)0x00000800) /*!< Receiver Time Out */
+#define USART_ISR_EOBF ((uint32_t)0x00001000) /*!< End Of Block Flag */
+#define USART_ISR_ABRE ((uint32_t)0x00004000) /*!< Auto-Baud Rate Error */
+#define USART_ISR_ABRF ((uint32_t)0x00008000) /*!< Auto-Baud Rate Flag */
+#define USART_ISR_BUSY ((uint32_t)0x00010000) /*!< Busy Flag */
+#define USART_ISR_CMF ((uint32_t)0x00020000) /*!< Character Match Flag */
+#define USART_ISR_SBKF ((uint32_t)0x00040000) /*!< Send Break Flag */
+#define USART_ISR_RWU ((uint32_t)0x00080000) /*!< Receive Wake Up from mute mode Flag */
+#define USART_ISR_WUF ((uint32_t)0x00100000) /*!< Wake Up from stop mode Flag */
+#define USART_ISR_TEACK ((uint32_t)0x00200000) /*!< Transmit Enable Acknowledge Flag */
+#define USART_ISR_REACK ((uint32_t)0x00400000) /*!< Receive Enable Acknowledge Flag */
+
+/******************* Bit definition for USART_ICR register ******************/
+#define USART_ICR_PECF ((uint32_t)0x00000001) /*!< Parity Error Clear Flag */
+#define USART_ICR_FECF ((uint32_t)0x00000002) /*!< Framing Error Clear Flag */
+#define USART_ICR_NCF ((uint32_t)0x00000004) /*!< Noise detected Clear Flag */
+#define USART_ICR_ORECF ((uint32_t)0x00000008) /*!< OverRun Error Clear Flag */
+#define USART_ICR_IDLECF ((uint32_t)0x00000010) /*!< IDLE line detected Clear Flag */
+#define USART_ICR_TCCF ((uint32_t)0x00000040) /*!< Transmission Complete Clear Flag */
+#define USART_ICR_LBDCF ((uint32_t)0x00000100) /*!< LIN Break Detection Clear Flag */
+#define USART_ICR_CTSCF ((uint32_t)0x00000200) /*!< CTS Interrupt Clear Flag */
+#define USART_ICR_RTOCF ((uint32_t)0x00000800) /*!< Receiver Time Out Clear Flag */
+#define USART_ICR_EOBCF ((uint32_t)0x00001000) /*!< End Of Block Clear Flag */
+#define USART_ICR_CMCF ((uint32_t)0x00020000) /*!< Character Match Clear Flag */
+#define USART_ICR_WUCF ((uint32_t)0x00100000) /*!< Wake Up from stop mode Clear Flag */
+
+/******************* Bit definition for USART_RDR register ******************/
+#define USART_RDR_RDR ((uint16_t)0x01FF) /*!< RDR[8:0] bits (Receive Data value) */
+
+/******************* Bit definition for USART_TDR register ******************/
+#define USART_TDR_TDR ((uint16_t)0x01FF) /*!< TDR[8:0] bits (Transmit Data value) */
+
+/******************************************************************************/
+/* */
+/* Window WATCHDOG (WWDG) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for WWDG_CR register ********************/
+#define WWDG_CR_T ((uint32_t)0x7F) /*!<T[6:0] bits (7-Bit counter (MSB to LSB)) */
+#define WWDG_CR_T0 ((uint32_t)0x01) /*!<Bit 0 */
+#define WWDG_CR_T1 ((uint32_t)0x02) /*!<Bit 1 */
+#define WWDG_CR_T2 ((uint32_t)0x04) /*!<Bit 2 */
+#define WWDG_CR_T3 ((uint32_t)0x08) /*!<Bit 3 */
+#define WWDG_CR_T4 ((uint32_t)0x10) /*!<Bit 4 */
+#define WWDG_CR_T5 ((uint32_t)0x20) /*!<Bit 5 */
+#define WWDG_CR_T6 ((uint32_t)0x40) /*!<Bit 6 */
+
+#define WWDG_CR_WDGA ((uint32_t)0x80) /*!<Activation bit */
+
+/******************* Bit definition for WWDG_CFR register *******************/
+#define WWDG_CFR_W ((uint32_t)0x007F) /*!<W[6:0] bits (7-bit window value) */
+#define WWDG_CFR_W0 ((uint32_t)0x0001) /*!<Bit 0 */
+#define WWDG_CFR_W1 ((uint32_t)0x0002) /*!<Bit 1 */
+#define WWDG_CFR_W2 ((uint32_t)0x0004) /*!<Bit 2 */
+#define WWDG_CFR_W3 ((uint32_t)0x0008) /*!<Bit 3 */
+#define WWDG_CFR_W4 ((uint32_t)0x0010) /*!<Bit 4 */
+#define WWDG_CFR_W5 ((uint32_t)0x0020) /*!<Bit 5 */
+#define WWDG_CFR_W6 ((uint32_t)0x0040) /*!<Bit 6 */
+
+#define WWDG_CFR_WDGTB ((uint32_t)0x0180) /*!<WDGTB[1:0] bits (Timer Base) */
+#define WWDG_CFR_WDGTB0 ((uint32_t)0x0080) /*!<Bit 0 */
+#define WWDG_CFR_WDGTB1 ((uint32_t)0x0100) /*!<Bit 1 */
+
+#define WWDG_CFR_EWI ((uint32_t)0x0200) /*!<Early Wakeup Interrupt */
+
+/******************* Bit definition for WWDG_SR register ********************/
+#define WWDG_SR_EWIF ((uint32_t)0x01) /*!<Early Wakeup Interrupt Flag */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+
+/** @addtogroup Exported_macro
+ * @{
+ */
+
+/****************************** ADC Instances *********************************/
+#define IS_ADC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == ADC1)
+
+#define IS_ADC_COMMON_INSTANCE(INSTANCE) ((INSTANCE) == ADC)
+
+/****************************** COMP Instances *********************************/
+#define IS_COMP_ALL_INSTANCE(INSTANCE) (((INSTANCE) == COMP1) || \
+ ((INSTANCE) == COMP2))
+
+#define IS_COMP_DAC1SWITCH_INSTANCE(INSTANCE) ((INSTANCE) == COMP1)
+
+#define IS_COMP_WINDOWMODE_INSTANCE(INSTANCE) ((INSTANCE) == COMP2)
+
+/****************************** CEC Instances *********************************/
+#define IS_CEC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CEC)
+
+/****************************** CRC Instances *********************************/
+#define IS_CRC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CRC)
+
+/******************************* DAC Instances ********************************/
+#define IS_DAC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == DAC)
+
+/******************************* DMA Instances ******************************/
+#define IS_DMA_ALL_INSTANCE(INSTANCE) (((INSTANCE) == DMA1_Channel1) || \
+ ((INSTANCE) == DMA1_Channel2) || \
+ ((INSTANCE) == DMA1_Channel3) || \
+ ((INSTANCE) == DMA1_Channel4) || \
+ ((INSTANCE) == DMA1_Channel5) || \
+ ((INSTANCE) == DMA1_Channel6) || \
+ ((INSTANCE) == DMA1_Channel7))
+
+/****************************** GPIO Instances ********************************/
+#define IS_GPIO_ALL_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB) || \
+ ((INSTANCE) == GPIOC) || \
+ ((INSTANCE) == GPIOD) || \
+ ((INSTANCE) == GPIOE) || \
+ ((INSTANCE) == GPIOF))
+
+#define IS_GPIO_AF_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB) || \
+ ((INSTANCE) == GPIOC) || \
+ ((INSTANCE) == GPIOD) || \
+ ((INSTANCE) == GPIOE))
+
+#define IS_GPIO_LOCK_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB))
+
+/****************************** I2C Instances *********************************/
+#define IS_I2C_ALL_INSTANCE(INSTANCE) (((INSTANCE) == I2C1) || \
+ ((INSTANCE) == I2C2))
+
+/****************************** I2S Instances *********************************/
+#define IS_I2S_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
+ ((INSTANCE) == SPI2))
+
+/****************************** IWDG Instances ********************************/
+#define IS_IWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == IWDG)
+
+/****************************** RTC Instances *********************************/
+#define IS_RTC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == RTC)
+
+/****************************** SMBUS Instances *********************************/
+#define IS_SMBUS_ALL_INSTANCE(INSTANCE) ((INSTANCE) == I2C1)
+
+/****************************** SPI Instances *********************************/
+#define IS_SPI_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
+ ((INSTANCE) == SPI2))
+
+/****************************** TIM Instances *********************************/
+#define IS_TIM_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM6) || \
+ ((INSTANCE) == TIM7) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CC1_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CC2_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_CC3_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CC4_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_TIX_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_ENCODER_INTERFACE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_HALL_INTERFACE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1))
+
+#define IS_TIM_XOR_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_MASTER_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM6) || \
+ ((INSTANCE) == TIM7) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_SLAVE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_32B_COUNTER_INSTANCE(INSTANCE)\
+ ((INSTANCE) == TIM2)
+
+#define IS_TIM_DMABURST_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_BREAK_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CCX_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM2) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM3) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM14) && \
+ (((CHANNEL) == TIM_CHANNEL_1))) \
+ || \
+ (((INSTANCE) == TIM15) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))) \
+ || \
+ (((INSTANCE) == TIM16) && \
+ (((CHANNEL) == TIM_CHANNEL_1))) \
+ || \
+ (((INSTANCE) == TIM17) && \
+ (((CHANNEL) == TIM_CHANNEL_1))))
+
+#define IS_TIM_CCXN_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3))) \
+ || \
+ (((INSTANCE) == TIM15) && \
+ ((CHANNEL) == TIM_CHANNEL_1)) \
+ || \
+ (((INSTANCE) == TIM16) && \
+ ((CHANNEL) == TIM_CHANNEL_1)) \
+ || \
+ (((INSTANCE) == TIM17) && \
+ ((CHANNEL) == TIM_CHANNEL_1)))
+
+#define IS_TIM_COUNTER_MODE_SELECT_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_REPETITION_COUNTER_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CLOCK_DIVISION_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_DMA_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM6) || \
+ ((INSTANCE) == TIM7) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_DMA_CC_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_COMMUTATION_EVENT_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_REMAP_INSTANCE(INSTANCE)\
+ ((INSTANCE) == TIM14)
+
+/****************************** TSC Instances *********************************/
+#define IS_TSC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == TSC)
+
+/*********************** UART Instances : IRDA mode ***************************/
+#define IS_IRDA_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/********************* UART Instances : Smard card mode ***********************/
+#define IS_SMARTCARD_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/******************** USART Instances : Synchronous mode **********************/
+#define IS_USART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3) || \
+ ((INSTANCE) == USART4))
+
+/******************** USART Instances : auto Baud rate detection **************/
+#define IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/******************** UART Instances : Asynchronous mode **********************/
+#define IS_UART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3) || \
+ ((INSTANCE) == USART4))
+
+/******************** UART Instances : Half-Duplex mode **********************/
+#define IS_UART_HALFDUPLEX_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3) || \
+ ((INSTANCE) == USART4))
+
+/****************** UART Instances : Hardware Flow control ********************/
+#define IS_UART_HWFLOW_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3) || \
+ ((INSTANCE) == USART4))
+
+/****************** UART Instances : LIN mode ********************/
+#define IS_UART_LIN_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/****************** UART Instances : wakeup from stop mode ********************/
+#define IS_UART_WAKEUP_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/****************** UART Instances : Auto Baud Rate detection ********************/
+#define IS_UART_AUTOBAUDRATE_DETECTION_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/****************** UART Instances : Driver enable detection ********************/
+#define IS_UART_DRIVER_ENABLE_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3) || \
+ ((INSTANCE) == USART4))
+
+/****************************** WWDG Instances ********************************/
+#define IS_WWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == WWDG)
+
+/**
+ * @}
+ */
+
+
+/******************************************************************************/
+/* For a painless codes migration between the STM32F0xx device product */
+/* lines, the aliases defined below are put in place to overcome the */
+/* differences in the interrupt handlers and IRQn definitions. */
+/* No need to update developed interrupt code when moving across */
+/* product lines within the same STM32F0 Family */
+/******************************************************************************/
+
+/* Aliases for __IRQn */
+#define PVD_IRQn PVD_VDDIO2_IRQn
+#define VDDIO2_IRQn PVD_VDDIO2_IRQn
+#define RCC_IRQn RCC_CRS_IRQn
+#define DMA1_Channel4_5_IRQn DMA1_Channel4_5_6_7_IRQn
+#define ADC1_IRQn ADC1_COMP_IRQn
+#define TIM6_IRQn TIM6_DAC_IRQn
+
+/* Aliases for __IRQHandler */
+#define PVD_IRQHandler PVD_VDDIO2_IRQHandler
+#define VDDIO2_IRQHandler PVD_VDDIO2_IRQHandler
+#define RCC_IRQHandler RCC_CRS_IRQHandler
+#define DMA1_Channel4_5_IRQHandler DMA1_Channel4_5_6_7_IRQHandler
+#define ADC1_IRQHandler ADC1_COMP_IRQHandler
+#define TIM6_IRQHandler TIM6_DAC_IRQHandler
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F071xB_H */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/include/devices/stm32f072xb.h b/f0/include/devices/stm32f072xb.h
new file mode 100755
index 0000000000000000000000000000000000000000..378cd6913b4fbfdfa11338f6eef1e05cd9b7773f
--- /dev/null
+++ b/f0/include/devices/stm32f072xb.h
@@ -0,0 +1,5576 @@
+/**
+ ******************************************************************************
+ * @file stm32f072xb.h
+ * @author MCD Application Team
+ * @version V2.2.1
+ * @date 09-January-2015
+ * @brief CMSIS STM32F072x8/STM32F072xB devices Peripheral Access Layer Header File.
+ *
+ * This file contains:
+ * - Data structures and the address mapping for all peripherals
+ * - Peripheral's registers declarations and bits definition
+ * - Macros to access peripheral’s registers hardware
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS_Device
+ * @{
+ */
+
+/** @addtogroup stm32f072xb
+ * @{
+ */
+
+#ifndef __STM32F072xB_H
+#define __STM32F072xB_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+
+/**
+ * @brief Configuration of the Cortex-M0 Processor and Core Peripherals
+ */
+#define __CM0_REV 0 /*!< Core Revision r0p0 */
+#define __MPU_PRESENT 0 /*!< STM32F0xx do not provide MPU */
+#define __NVIC_PRIO_BITS 2 /*!< STM32F0xx uses 2 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F072x8/STM32F072xB device Interrupt Number Definition
+ */
+typedef enum
+{
+/****** Cortex-M0 Processor Exceptions Numbers **************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */
+ SVC_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */
+
+/****** STM32F072x8/STM32F072xB specific Interrupt Numbers **************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ PVD_VDDIO2_IRQn = 1, /*!< PVD & VDDIO2 Interrupts through EXTI Lines 16 and 31 */
+ RTC_IRQn = 2, /*!< RTC Interrupt through EXTI Lines 17, 19 and 20 */
+ FLASH_IRQn = 3, /*!< FLASH global Interrupt */
+ RCC_CRS_IRQn = 4, /*!< RCC & CRS global Interrupts */
+ EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupts */
+ EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupts */
+ EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupts */
+ TSC_IRQn = 8, /*!< Touch Sensing Controller Interrupts */
+ DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */
+ DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupts */
+ DMA1_Channel4_5_6_7_IRQn = 11, /*!< DMA1 Channel 4 to Channel 7 Interrupts */
+ ADC1_COMP_IRQn = 12, /*!< ADC1 and COMP interrupts (ADC interrupt combined with EXTI Lines 21 and 22 */
+ TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupts */
+ TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 15, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 16, /*!< TIM3 global Interrupt */
+ TIM6_DAC_IRQn = 17, /*!< TIM6 global and DAC channel underrun error Interrupts */
+ TIM7_IRQn = 18, /*!< TIM7 global Interrupt */
+ TIM14_IRQn = 19, /*!< TIM14 global Interrupt */
+ TIM15_IRQn = 20, /*!< TIM15 global Interrupt */
+ TIM16_IRQn = 21, /*!< TIM16 global Interrupt */
+ TIM17_IRQn = 22, /*!< TIM17 global Interrupt */
+ I2C1_IRQn = 23, /*!< I2C1 Event Interrupt & EXTI Line23 Interrupt (I2C1 wakeup) */
+ I2C2_IRQn = 24, /*!< I2C2 Event Interrupt */
+ SPI1_IRQn = 25, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 26, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 27, /*!< USART1 global Interrupt & EXTI Line25 Interrupt (USART1 wakeup) */
+ USART2_IRQn = 28, /*!< USART2 global Interrupt & EXTI Line26 Interrupt (USART2 wakeup) */
+ USART3_4_IRQn = 29, /*!< USART3 and USART4 global Interrupts */
+ CEC_CAN_IRQn = 30, /*!< CEC and CAN global Interrupts & EXTI Line27 Interrupt */
+ USB_IRQn = 31 /*!< USB global Interrupts & EXTI Line18 Interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm0.h" /* Cortex-M0 processor and core peripherals */
+#include "system_stm32f0xx.h" /* STM32F0xx System Header */
+#include <stdint.h>
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< ADC Interrupt and Status register, Address offset:0x00 */
+ __IO uint32_t IER; /*!< ADC Interrupt Enable register, Address offset:0x04 */
+ __IO uint32_t CR; /*!< ADC Control register, Address offset:0x08 */
+ __IO uint32_t CFGR1; /*!< ADC Configuration register 1, Address offset:0x0C */
+ __IO uint32_t CFGR2; /*!< ADC Configuration register 2, Address offset:0x10 */
+ __IO uint32_t SMPR; /*!< ADC Sampling time register, Address offset:0x14 */
+ uint32_t RESERVED1; /*!< Reserved, 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, 0x1C */
+ __IO uint32_t TR; /*!< ADC watchdog threshold register, Address offset:0x20 */
+ uint32_t RESERVED3; /*!< Reserved, 0x24 */
+ __IO uint32_t CHSELR; /*!< ADC channel selection register, Address offset:0x28 */
+ uint32_t RESERVED4[5]; /*!< Reserved, 0x2C */
+ __IO uint32_t DR; /*!< ADC data register, Address offset:0x40 */
+}ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CCR;
+}ADC_Common_TypeDef;
+
+/**
+ * @brief Controller Area Network TxMailBox
+ */
+typedef struct
+{
+ __IO uint32_t TIR; /*!< CAN TX mailbox identifier register */
+ __IO uint32_t TDTR; /*!< CAN mailbox data length control and time stamp register */
+ __IO uint32_t TDLR; /*!< CAN mailbox data low register */
+ __IO uint32_t TDHR; /*!< CAN mailbox data high register */
+}CAN_TxMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FIFOMailBox
+ */
+typedef struct
+{
+ __IO uint32_t RIR; /*!< CAN receive FIFO mailbox identifier register */
+ __IO uint32_t RDTR; /*!< CAN receive FIFO mailbox data length control and time stamp register */
+ __IO uint32_t RDLR; /*!< CAN receive FIFO mailbox data low register */
+ __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */
+}CAN_FIFOMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FilterRegister
+ */
+typedef struct
+{
+ __IO uint32_t FR1; /*!< CAN Filter bank register 1 */
+ __IO uint32_t FR2; /*!< CAN Filter bank register 1 */
+}CAN_FilterRegister_TypeDef;
+
+/**
+ * @brief Controller Area Network
+ */
+typedef struct
+{
+ __IO uint32_t MCR; /*!< CAN master control register, Address offset: 0x00 */
+ __IO uint32_t MSR; /*!< CAN master status register, Address offset: 0x04 */
+ __IO uint32_t TSR; /*!< CAN transmit status register, Address offset: 0x08 */
+ __IO uint32_t RF0R; /*!< CAN receive FIFO 0 register, Address offset: 0x0C */
+ __IO uint32_t RF1R; /*!< CAN receive FIFO 1 register, Address offset: 0x10 */
+ __IO uint32_t IER; /*!< CAN interrupt enable register, Address offset: 0x14 */
+ __IO uint32_t ESR; /*!< CAN error status register, Address offset: 0x18 */
+ __IO uint32_t BTR; /*!< CAN bit timing register, Address offset: 0x1C */
+ uint32_t RESERVED0[88]; /*!< Reserved, 0x020 - 0x17F */
+ CAN_TxMailBox_TypeDef sTxMailBox[3]; /*!< CAN Tx MailBox, Address offset: 0x180 - 0x1AC */
+ CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; /*!< CAN FIFO MailBox, Address offset: 0x1B0 - 0x1CC */
+ uint32_t RESERVED1[12]; /*!< Reserved, 0x1D0 - 0x1FF */
+ __IO uint32_t FMR; /*!< CAN filter master register, Address offset: 0x200 */
+ __IO uint32_t FM1R; /*!< CAN filter mode register, Address offset: 0x204 */
+ uint32_t RESERVED2; /*!< Reserved, 0x208 */
+ __IO uint32_t FS1R; /*!< CAN filter scale register, Address offset: 0x20C */
+ uint32_t RESERVED3; /*!< Reserved, 0x210 */
+ __IO uint32_t FFA1R; /*!< CAN filter FIFO assignment register, Address offset: 0x214 */
+ uint32_t RESERVED4; /*!< Reserved, 0x218 */
+ __IO uint32_t FA1R; /*!< CAN filter activation register, Address offset: 0x21C */
+ uint32_t RESERVED5[8]; /*!< Reserved, 0x220-0x23F */
+ CAN_FilterRegister_TypeDef sFilterRegister[28]; /*!< CAN Filter Register, Address offset: 0x240-0x31C */
+}CAN_TypeDef;
+
+/**
+ * @brief HDMI-CEC
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< CEC control register, Address offset:0x00 */
+ __IO uint32_t CFGR; /*!< CEC configuration register, Address offset:0x04 */
+ __IO uint32_t TXDR; /*!< CEC Tx data register , Address offset:0x08 */
+ __IO uint32_t RXDR; /*!< CEC Rx Data Register, Address offset:0x0C */
+ __IO uint32_t ISR; /*!< CEC Interrupt and Status Register, Address offset:0x10 */
+ __IO uint32_t IER; /*!< CEC interrupt enable register, Address offset:0x14 */
+}CEC_TypeDef;
+
+/**
+ * @brief Comparator
+ */
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< Comparator 1 & 2 control Status register, Address offset: 0x00 */
+}COMP1_2_TypeDef;
+
+typedef struct
+{
+ __IO uint16_t CSR; /*!< Comparator control Status register, Address offset: 0x00 */
+}COMP_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+ uint32_t RESERVED2; /*!< Reserved, 0x0C */
+ __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */
+ __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */
+}CRC_TypeDef;
+
+/**
+ * @brief Clock Recovery System
+ */
+typedef struct
+{
+__IO uint32_t CR; /*!< CRS ccontrol register, Address offset: 0x00 */
+__IO uint32_t CFGR; /*!< CRS configuration register, Address offset: 0x04 */
+__IO uint32_t ISR; /*!< CRS interrupt and status register, Address offset: 0x08 */
+__IO uint32_t ICR; /*!< CRS interrupt flag clear register, Address offset: 0x0C */
+}CRS_TypeDef;
+
+/**
+ * @brief Digital to Analog Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */
+ __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */
+ __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */
+ __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */
+ __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */
+ __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */
+ __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */
+ __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */
+ __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */
+ __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */
+ __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */
+ __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */
+ __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */
+ __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */
+}DAC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< DMA channel x configuration register */
+ __IO uint32_t CNDTR; /*!< DMA channel x number of data register */
+ __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */
+ __IO uint32_t CMAR; /*!< DMA channel x memory address register */
+}DMA_Channel_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */
+ __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */
+}DMA_TypeDef;
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!<EXTI Interrupt mask register, Address offset: 0x00 */
+ __IO uint32_t EMR; /*!<EXTI Event mask register, Address offset: 0x04 */
+ __IO uint32_t RTSR; /*!<EXTI Rising trigger selection register , Address offset: 0x08 */
+ __IO uint32_t FTSR; /*!<EXTI Falling trigger selection register, Address offset: 0x0C */
+ __IO uint32_t SWIER; /*!<EXTI Software interrupt event register, Address offset: 0x10 */
+ __IO uint32_t PR; /*!<EXTI Pending register, Address offset: 0x14 */
+}EXTI_TypeDef;
+
+/**
+ * @brief FLASH Registers
+ */
+typedef struct
+{
+ __IO uint32_t ACR; /*!<FLASH access control register, Address offset: 0x00 */
+ __IO uint32_t KEYR; /*!<FLASH key register, Address offset: 0x04 */
+ __IO uint32_t OPTKEYR; /*!<FLASH OPT key register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!<FLASH status register, Address offset: 0x0C */
+ __IO uint32_t CR; /*!<FLASH control register, Address offset: 0x10 */
+ __IO uint32_t AR; /*!<FLASH address register, Address offset: 0x14 */
+ __IO uint32_t RESERVED; /*!< Reserved, 0x18 */
+ __IO uint32_t OBR; /*!<FLASH option bytes register, Address offset: 0x1C */
+ __IO uint32_t WRPR; /*!<FLASH option bytes register, Address offset: 0x20 */
+}FLASH_TypeDef;
+
+
+/**
+ * @brief Option Bytes Registers
+ */
+typedef struct
+{
+ __IO uint16_t RDP; /*!< FLASH option byte Read protection, Address offset: 0x00 */
+ __IO uint16_t USER; /*!< FLASH option byte user options, Address offset: 0x02 */
+ __IO uint16_t DATA0; /*!< User data byte 0 (stored in FLASH_OBR[23:16]), Address offset: 0x04 */
+ __IO uint16_t DATA1; /*!< User data byte 1 (stored in FLASH_OBR[31:24]), Address offset: 0x06 */
+ __IO uint16_t WRP0; /*!< FLASH option byte write protection 0, Address offset: 0x08 */
+ __IO uint16_t WRP1; /*!< FLASH option byte write protection 1, Address offset: 0x0A */
+ __IO uint16_t WRP2; /*!< FLASH option byte write protection 2, Address offset: 0x0C */
+ __IO uint16_t WRP3; /*!< FLASH option byte write protection 3, Address offset: 0x0E */
+}OB_TypeDef;
+
+/**
+ * @brief General Purpose I/O
+ */
+
+typedef struct
+{
+ __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */
+ __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */
+ __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */
+ __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */
+ __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */
+ __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */
+ __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x1A */
+ __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */
+ __IO uint32_t AFR[2]; /*!< GPIO alternate function low register, Address offset: 0x20-0x24 */
+ __IO uint32_t BRR; /*!< GPIO bit reset register, Address offset: 0x28 */
+}GPIO_TypeDef;
+
+/**
+ * @brief SysTem Configuration
+ */
+
+typedef struct
+{
+ __IO uint32_t CFGR1; /*!< SYSCFG configuration register 1, Address offset: 0x00 */
+ uint32_t RESERVED; /*!< Reserved, 0x04 */
+ __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration register, Address offset: 0x14-0x08 */
+ __IO uint32_t CFGR2; /*!< SYSCFG configuration register 2, Address offset: 0x18 */
+}SYSCFG_TypeDef;
+
+/**
+ * @brief Inter-integrated Circuit Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */
+ __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */
+ __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */
+ __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */
+ __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */
+ __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */
+ __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */
+ __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */
+ __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */
+ __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */
+}I2C_TypeDef;
+
+/**
+ * @brief Independent WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */
+ __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */
+ __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */
+ __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */
+}IWDG_TypeDef;
+
+/**
+ * @brief Power Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< PWR power control register, Address offset: 0x00 */
+ __IO uint32_t CSR; /*!< PWR power control/status register, Address offset: 0x04 */
+}PWR_TypeDef;
+
+/**
+ * @brief Reset and Clock Control
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */
+ __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x04 */
+ __IO uint32_t CIR; /*!< RCC clock interrupt register, Address offset: 0x08 */
+ __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x0C */
+ __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x10 */
+ __IO uint32_t AHBENR; /*!< RCC AHB peripheral clock register, Address offset: 0x14 */
+ __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x18 */
+ __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x1C */
+ __IO uint32_t BDCR; /*!< RCC Backup domain control register, Address offset: 0x20 */
+ __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x24 */
+ __IO uint32_t AHBRSTR; /*!< RCC AHB peripheral reset register, Address offset: 0x28 */
+ __IO uint32_t CFGR2; /*!< RCC clock configuration register 2, Address offset: 0x2C */
+ __IO uint32_t CFGR3; /*!< RCC clock configuration register 3, Address offset: 0x30 */
+ __IO uint32_t CR2; /*!< RCC clock control register 2, Address offset: 0x34 */
+}RCC_TypeDef;
+
+/**
+ * @brief Real-Time Clock
+ */
+
+typedef struct
+{
+ __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */
+ __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */
+ __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */
+ uint32_t RESERVED1; /*!< Reserved, Address offset: 0x18 */
+ __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */
+ uint32_t RESERVED2; /*!< Reserved, Address offset: 0x20 */
+ __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */
+ __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */
+ __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */
+ __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */
+ __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */
+ __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */
+ __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */
+ __IO uint32_t TAFCR; /*!< RTC tamper and alternate function configuration register, Address offset: 0x40 */
+ __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */
+ uint32_t RESERVED3; /*!< Reserved, Address offset: 0x48 */
+ uint32_t RESERVED4; /*!< Reserved, Address offset: 0x4C */
+ __IO uint32_t BKP0R; /*!< RTC backup register 0, Address offset: 0x50 */
+ __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */
+ __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */
+ __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */
+ __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */
+}RTC_TypeDef;
+
+/**
+ * @brief Serial Peripheral Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< SPI Control register 1 (not used in I2S mode), Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */
+ __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */
+ __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */
+ __IO uint32_t RXCRCR; /*!< SPI Rx CRC register (not used in I2S mode), Address offset: 0x14 */
+ __IO uint32_t TXCRCR; /*!< SPI Tx CRC register (not used in I2S mode), Address offset: 0x18 */
+ __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */
+ __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */
+}SPI_TypeDef;
+
+/**
+ * @brief TIM
+ */
+typedef struct
+{
+ __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */
+ __IO uint32_t SMCR; /*!< TIM slave Mode Control register, Address offset: 0x08 */
+ __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */
+ __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */
+ __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */
+ __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */
+ __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */
+ __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */
+ __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */
+ __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */
+ __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */
+ __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */
+ __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */
+ __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */
+ __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */
+ __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */
+ __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */
+ __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */
+ __IO uint32_t DMAR; /*!< TIM DMA address for full transfer register, Address offset: 0x4C */
+ __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */
+}TIM_TypeDef;
+
+/**
+ * @brief Touch Sensing Controller (TSC)
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< TSC control register, Address offset: 0x00 */
+ __IO uint32_t IER; /*!< TSC interrupt enable register, Address offset: 0x04 */
+ __IO uint32_t ICR; /*!< TSC interrupt clear register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< TSC interrupt status register, Address offset: 0x0C */
+ __IO uint32_t IOHCR; /*!< TSC I/O hysteresis control register, Address offset: 0x10 */
+ uint32_t RESERVED1; /*!< Reserved, Address offset: 0x14 */
+ __IO uint32_t IOASCR; /*!< TSC I/O analog switch control register, Address offset: 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, Address offset: 0x1C */
+ __IO uint32_t IOSCR; /*!< TSC I/O sampling control register, Address offset: 0x20 */
+ uint32_t RESERVED3; /*!< Reserved, Address offset: 0x24 */
+ __IO uint32_t IOCCR; /*!< TSC I/O channel control register, Address offset: 0x28 */
+ uint32_t RESERVED4; /*!< Reserved, Address offset: 0x2C */
+ __IO uint32_t IOGCSR; /*!< TSC I/O group control status register, Address offset: 0x30 */
+ __IO uint32_t IOGXCR[8]; /*!< TSC I/O group x counter register, Address offset: 0x34-50 */
+}TSC_TypeDef;
+
+/**
+ * @brief Universal Synchronous Asynchronous Receiver Transmitter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */
+ __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */
+ __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */
+ __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */
+ __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */
+ __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */
+ __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */
+ __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */
+ __IO uint16_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */
+ uint16_t RESERVED1; /*!< Reserved, 0x26 */
+ __IO uint16_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */
+ uint16_t RESERVED2; /*!< Reserved, 0x2A */
+}USART_TypeDef;
+
+/**
+ * @brief Universal Serial Bus Full Speed Device
+ */
+
+typedef struct
+{
+ __IO uint16_t EP0R; /*!< USB Endpoint 0 register, Address offset: 0x00 */
+ __IO uint16_t RESERVED0; /*!< Reserved */
+ __IO uint16_t EP1R; /*!< USB Endpoint 1 register, Address offset: 0x04 */
+ __IO uint16_t RESERVED1; /*!< Reserved */
+ __IO uint16_t EP2R; /*!< USB Endpoint 2 register, Address offset: 0x08 */
+ __IO uint16_t RESERVED2; /*!< Reserved */
+ __IO uint16_t EP3R; /*!< USB Endpoint 3 register, Address offset: 0x0C */
+ __IO uint16_t RESERVED3; /*!< Reserved */
+ __IO uint16_t EP4R; /*!< USB Endpoint 4 register, Address offset: 0x10 */
+ __IO uint16_t RESERVED4; /*!< Reserved */
+ __IO uint16_t EP5R; /*!< USB Endpoint 5 register, Address offset: 0x14 */
+ __IO uint16_t RESERVED5; /*!< Reserved */
+ __IO uint16_t EP6R; /*!< USB Endpoint 6 register, Address offset: 0x18 */
+ __IO uint16_t RESERVED6; /*!< Reserved */
+ __IO uint16_t EP7R; /*!< USB Endpoint 7 register, Address offset: 0x1C */
+ __IO uint16_t RESERVED7[17]; /*!< Reserved */
+ __IO uint16_t CNTR; /*!< Control register, Address offset: 0x40 */
+ __IO uint16_t RESERVED8; /*!< Reserved */
+ __IO uint16_t ISTR; /*!< Interrupt status register, Address offset: 0x44 */
+ __IO uint16_t RESERVED9; /*!< Reserved */
+ __IO uint16_t FNR; /*!< Frame number register, Address offset: 0x48 */
+ __IO uint16_t RESERVEDA; /*!< Reserved */
+ __IO uint16_t DADDR; /*!< Device address register, Address offset: 0x4C */
+ __IO uint16_t RESERVEDB; /*!< Reserved */
+ __IO uint16_t BTABLE; /*!< Buffer Table address register, Address offset: 0x50 */
+ __IO uint16_t RESERVEDC; /*!< Reserved */
+ __IO uint16_t LPMCSR; /*!< LPM Control and Status register, Address offset: 0x54 */
+ __IO uint16_t RESERVEDD; /*!< Reserved */
+ __IO uint16_t BCDR; /*!< Battery Charging detector register, Address offset: 0x58 */
+ __IO uint16_t RESERVEDE; /*!< Reserved */
+}USB_TypeDef;
+
+/**
+ * @brief Window WATCHDOG
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */
+ __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */
+}WWDG_TypeDef;
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_memory_map
+ * @{
+ */
+
+#define FLASH_BASE ((uint32_t)0x08000000) /*!< FLASH base address in the alias region */
+#define SRAM_BASE ((uint32_t)0x20000000) /*!< SRAM base address in the alias region */
+#define PERIPH_BASE ((uint32_t)0x40000000) /*!< Peripheral base address in the alias region */
+
+/*!< Peripheral memory map */
+#define APBPERIPH_BASE PERIPH_BASE
+#define AHBPERIPH_BASE (PERIPH_BASE + 0x00020000)
+#define AHB2PERIPH_BASE (PERIPH_BASE + 0x08000000)
+
+#define TIM2_BASE (APBPERIPH_BASE + 0x00000000)
+#define TIM3_BASE (APBPERIPH_BASE + 0x00000400)
+#define TIM6_BASE (APBPERIPH_BASE + 0x00001000)
+#define TIM7_BASE (APBPERIPH_BASE + 0x00001400)
+#define TIM14_BASE (APBPERIPH_BASE + 0x00002000)
+#define RTC_BASE (APBPERIPH_BASE + 0x00002800)
+#define WWDG_BASE (APBPERIPH_BASE + 0x00002C00)
+#define IWDG_BASE (APBPERIPH_BASE + 0x00003000)
+#define SPI2_BASE (APBPERIPH_BASE + 0x00003800)
+#define USART2_BASE (APBPERIPH_BASE + 0x00004400)
+#define USART3_BASE (APBPERIPH_BASE + 0x00004800)
+#define USART4_BASE (APBPERIPH_BASE + 0x00004C00)
+#define I2C1_BASE (APBPERIPH_BASE + 0x00005400)
+#define I2C2_BASE (APBPERIPH_BASE + 0x00005800)
+#define USB_BASE (APBPERIPH_BASE + 0x00005C00) /*!< USB_IP Peripheral Registers base address */
+#define USB_PMAADDR (APBPERIPH_BASE + 0x00006000) /*!< USB_IP Packet Memory Area base address */
+#define CAN_BASE (APBPERIPH_BASE + 0x00006400)
+#define CRS_BASE (APBPERIPH_BASE + 0x00006C00)
+#define PWR_BASE (APBPERIPH_BASE + 0x00007000)
+#define DAC_BASE (APBPERIPH_BASE + 0x00007400)
+#define CEC_BASE (APBPERIPH_BASE + 0x00007800)
+
+#define SYSCFG_BASE (APBPERIPH_BASE + 0x00010000)
+#define COMP_BASE (APBPERIPH_BASE + 0x0001001C)
+#define EXTI_BASE (APBPERIPH_BASE + 0x00010400)
+#define ADC1_BASE (APBPERIPH_BASE + 0x00012400)
+#define ADC_BASE (APBPERIPH_BASE + 0x00012708)
+#define TIM1_BASE (APBPERIPH_BASE + 0x00012C00)
+#define SPI1_BASE (APBPERIPH_BASE + 0x00013000)
+#define USART1_BASE (APBPERIPH_BASE + 0x00013800)
+#define TIM15_BASE (APBPERIPH_BASE + 0x00014000)
+#define TIM16_BASE (APBPERIPH_BASE + 0x00014400)
+#define TIM17_BASE (APBPERIPH_BASE + 0x00014800)
+#define DBGMCU_BASE (APBPERIPH_BASE + 0x00015800)
+
+#define DMA1_BASE (AHBPERIPH_BASE + 0x00000000)
+#define DMA1_Channel1_BASE (DMA1_BASE + 0x00000008)
+#define DMA1_Channel2_BASE (DMA1_BASE + 0x0000001C)
+#define DMA1_Channel3_BASE (DMA1_BASE + 0x00000030)
+#define DMA1_Channel4_BASE (DMA1_BASE + 0x00000044)
+#define DMA1_Channel5_BASE (DMA1_BASE + 0x00000058)
+#define DMA1_Channel6_BASE (DMA1_BASE + 0x0000006C)
+#define DMA1_Channel7_BASE (DMA1_BASE + 0x00000080)
+
+#define RCC_BASE (AHBPERIPH_BASE + 0x00001000)
+#define FLASH_R_BASE (AHBPERIPH_BASE + 0x00002000) /*!< FLASH registers base address */
+#define OB_BASE ((uint32_t)0x1FFFF800) /*!< FLASH Option Bytes base address */
+#define CRC_BASE (AHBPERIPH_BASE + 0x00003000)
+#define TSC_BASE (AHBPERIPH_BASE + 0x00004000)
+
+#define GPIOA_BASE (AHB2PERIPH_BASE + 0x00000000)
+#define GPIOB_BASE (AHB2PERIPH_BASE + 0x00000400)
+#define GPIOC_BASE (AHB2PERIPH_BASE + 0x00000800)
+#define GPIOD_BASE (AHB2PERIPH_BASE + 0x00000C00)
+#define GPIOE_BASE (AHB2PERIPH_BASE + 0x00001000)
+#define GPIOF_BASE (AHB2PERIPH_BASE + 0x00001400)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_declaration
+ * @{
+ */
+
+#define TIM2 ((TIM_TypeDef *) TIM2_BASE)
+#define TIM3 ((TIM_TypeDef *) TIM3_BASE)
+#define TIM6 ((TIM_TypeDef *) TIM6_BASE)
+#define TIM7 ((TIM_TypeDef *) TIM7_BASE)
+#define TIM14 ((TIM_TypeDef *) TIM14_BASE)
+#define RTC ((RTC_TypeDef *) RTC_BASE)
+#define WWDG ((WWDG_TypeDef *) WWDG_BASE)
+#define IWDG ((IWDG_TypeDef *) IWDG_BASE)
+#define SPI2 ((SPI_TypeDef *) SPI2_BASE)
+#define USART2 ((USART_TypeDef *) USART2_BASE)
+#define USART3 ((USART_TypeDef *) USART3_BASE)
+#define USART4 ((USART_TypeDef *) USART4_BASE)
+#define I2C1 ((I2C_TypeDef *) I2C1_BASE)
+#define I2C2 ((I2C_TypeDef *) I2C2_BASE)
+#define CAN ((CAN_TypeDef *) CAN_BASE)
+#define CRS ((CRS_TypeDef *) CRS_BASE)
+#define PWR ((PWR_TypeDef *) PWR_BASE)
+#define DAC ((DAC_TypeDef *) DAC_BASE)
+#define CEC ((CEC_TypeDef *) CEC_BASE)
+#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE)
+#define COMP ((COMP1_2_TypeDef *) COMP_BASE)
+#define COMP1 ((COMP_TypeDef *) COMP_BASE)
+#define COMP2 ((COMP_TypeDef *) (COMP_BASE + 0x00000002))
+#define EXTI ((EXTI_TypeDef *) EXTI_BASE)
+#define ADC1 ((ADC_TypeDef *) ADC1_BASE)
+#define ADC ((ADC_Common_TypeDef *) ADC_BASE)
+#define TIM1 ((TIM_TypeDef *) TIM1_BASE)
+#define SPI1 ((SPI_TypeDef *) SPI1_BASE)
+#define USART1 ((USART_TypeDef *) USART1_BASE)
+#define TIM15 ((TIM_TypeDef *) TIM15_BASE)
+#define TIM16 ((TIM_TypeDef *) TIM16_BASE)
+#define TIM17 ((TIM_TypeDef *) TIM17_BASE)
+#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE)
+#define DMA1 ((DMA_TypeDef *) DMA1_BASE)
+#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE)
+#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE)
+#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE)
+#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE)
+#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE)
+#define DMA1_Channel6 ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE)
+#define DMA1_Channel7 ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE)
+#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE)
+#define OB ((OB_TypeDef *) OB_BASE)
+#define RCC ((RCC_TypeDef *) RCC_BASE)
+#define CRC ((CRC_TypeDef *) CRC_BASE)
+#define TSC ((TSC_TypeDef *) TSC_BASE)
+#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE)
+#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE)
+#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE)
+#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE)
+#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE)
+#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE)
+#define USB ((USB_TypeDef *) USB_BASE)
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_constants
+ * @{
+ */
+
+ /** @addtogroup Peripheral_Registers_Bits_Definition
+ * @{
+ */
+
+/******************************************************************************/
+/* Peripheral Registers Bits Definition */
+/******************************************************************************/
+/******************************************************************************/
+/* */
+/* Analog to Digital Converter (ADC) */
+/* */
+/******************************************************************************/
+/******************** Bits definition for ADC_ISR register ******************/
+#define ADC_ISR_AWD ((uint32_t)0x00000080) /*!< Analog watchdog flag */
+#define ADC_ISR_OVR ((uint32_t)0x00000010) /*!< Overrun flag */
+#define ADC_ISR_EOSEQ ((uint32_t)0x00000008) /*!< End of Sequence flag */
+#define ADC_ISR_EOC ((uint32_t)0x00000004) /*!< End of Conversion */
+#define ADC_ISR_EOSMP ((uint32_t)0x00000002) /*!< End of sampling flag */
+#define ADC_ISR_ADRDY ((uint32_t)0x00000001) /*!< ADC Ready */
+
+/* Old EOSEQ bit definition, maintained for legacy purpose */
+#define ADC_ISR_EOS ADC_ISR_EOSEQ
+
+/******************** Bits definition for ADC_IER register ******************/
+#define ADC_IER_AWDIE ((uint32_t)0x00000080) /*!< Analog Watchdog interrupt enable */
+#define ADC_IER_OVRIE ((uint32_t)0x00000010) /*!< Overrun interrupt enable */
+#define ADC_IER_EOSEQIE ((uint32_t)0x00000008) /*!< End of Sequence of conversion interrupt enable */
+#define ADC_IER_EOCIE ((uint32_t)0x00000004) /*!< End of Conversion interrupt enable */
+#define ADC_IER_EOSMPIE ((uint32_t)0x00000002) /*!< End of sampling interrupt enable */
+#define ADC_IER_ADRDYIE ((uint32_t)0x00000001) /*!< ADC Ready interrupt enable */
+
+/* Old EOSEQIE bit definition, maintained for legacy purpose */
+#define ADC_IER_EOSIE ADC_IER_EOSEQIE
+
+/******************** Bits definition for ADC_CR register *******************/
+#define ADC_CR_ADCAL ((uint32_t)0x80000000) /*!< ADC calibration */
+#define ADC_CR_ADSTP ((uint32_t)0x00000010) /*!< ADC stop of conversion command */
+#define ADC_CR_ADSTART ((uint32_t)0x00000004) /*!< ADC start of conversion */
+#define ADC_CR_ADDIS ((uint32_t)0x00000002) /*!< ADC disable command */
+#define ADC_CR_ADEN ((uint32_t)0x00000001) /*!< ADC enable control */
+
+/******************* Bits definition for ADC_CFGR1 register *****************/
+#define ADC_CFGR1_AWDCH ((uint32_t)0x7C000000) /*!< AWDCH[4:0] bits (Analog watchdog channel select bits) */
+#define ADC_CFGR1_AWDCH_0 ((uint32_t)0x04000000) /*!< Bit 0 */
+#define ADC_CFGR1_AWDCH_1 ((uint32_t)0x08000000) /*!< Bit 1 */
+#define ADC_CFGR1_AWDCH_2 ((uint32_t)0x10000000) /*!< Bit 2 */
+#define ADC_CFGR1_AWDCH_3 ((uint32_t)0x20000000) /*!< Bit 3 */
+#define ADC_CFGR1_AWDCH_4 ((uint32_t)0x40000000) /*!< Bit 4 */
+#define ADC_CFGR1_AWDEN ((uint32_t)0x00800000) /*!< Analog watchdog enable on regular channels */
+#define ADC_CFGR1_AWDSGL ((uint32_t)0x00400000) /*!< Enable the watchdog on a single channel or on all channels */
+#define ADC_CFGR1_DISCEN ((uint32_t)0x00010000) /*!< Discontinuous mode on regular channels */
+#define ADC_CFGR1_AUTOFF ((uint32_t)0x00008000) /*!< ADC auto power off */
+#define ADC_CFGR1_WAIT ((uint32_t)0x00004000) /*!< ADC wait conversion mode */
+#define ADC_CFGR1_CONT ((uint32_t)0x00002000) /*!< Continuous Conversion */
+#define ADC_CFGR1_OVRMOD ((uint32_t)0x00001000) /*!< Overrun mode */
+#define ADC_CFGR1_EXTEN ((uint32_t)0x00000C00) /*!< EXTEN[1:0] bits (External Trigger Conversion mode for regular channels) */
+#define ADC_CFGR1_EXTEN_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define ADC_CFGR1_EXTEN_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define ADC_CFGR1_EXTSEL ((uint32_t)0x000001C0) /*!< EXTSEL[2:0] bits (External Event Select for regular group) */
+#define ADC_CFGR1_EXTSEL_0 ((uint32_t)0x00000040) /*!< Bit 0 */
+#define ADC_CFGR1_EXTSEL_1 ((uint32_t)0x00000080) /*!< Bit 1 */
+#define ADC_CFGR1_EXTSEL_2 ((uint32_t)0x00000100) /*!< Bit 2 */
+#define ADC_CFGR1_ALIGN ((uint32_t)0x00000020) /*!< Data Alignment */
+#define ADC_CFGR1_RES ((uint32_t)0x00000018) /*!< RES[1:0] bits (Resolution) */
+#define ADC_CFGR1_RES_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define ADC_CFGR1_RES_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define ADC_CFGR1_SCANDIR ((uint32_t)0x00000004) /*!< Sequence scan direction */
+#define ADC_CFGR1_DMACFG ((uint32_t)0x00000002) /*!< Direct memory access configuration */
+#define ADC_CFGR1_DMAEN ((uint32_t)0x00000001) /*!< Direct memory access enable */
+
+/* Old WAIT bit definition, maintained for legacy purpose */
+#define ADC_CFGR1_AUTDLY ADC_CFGR1_WAIT
+
+/******************* Bits definition for ADC_CFGR2 register *****************/
+#define ADC_CFGR2_CKMODE ((uint32_t)0xC0000000) /*!< ADC clock mode */
+#define ADC_CFGR2_CKMODE_1 ((uint32_t)0x80000000) /*!< ADC clocked by PCLK div4 */
+#define ADC_CFGR2_CKMODE_0 ((uint32_t)0x40000000) /*!< ADC clocked by PCLK div2 */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_CFGR2_JITOFFDIV4 ADC_CFGR2_CKMODE_1 /*!< ADC clocked by PCLK div4 */
+#define ADC_CFGR2_JITOFFDIV2 ADC_CFGR2_CKMODE_0 /*!< ADC clocked by PCLK div2 */
+
+/****************** Bit definition for ADC_SMPR register ********************/
+#define ADC_SMPR_SMP ((uint32_t)0x00000007) /*!< SMP[2:0] bits (Sampling time selection) */
+#define ADC_SMPR_SMP_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define ADC_SMPR_SMP_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define ADC_SMPR_SMP_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_SMPR1_SMPR ADC_SMPR_SMP /*!< SMP[2:0] bits (Sampling time selection) */
+#define ADC_SMPR1_SMPR_0 ADC_SMPR_SMP_0 /*!< Bit 0 */
+#define ADC_SMPR1_SMPR_1 ADC_SMPR_SMP_1 /*!< Bit 1 */
+#define ADC_SMPR1_SMPR_2 ADC_SMPR_SMP_2 /*!< Bit 2 */
+
+/******************* Bit definition for ADC_TR register ********************/
+#define ADC_TR_HT ((uint32_t)0x0FFF0000) /*!< Analog watchdog high threshold */
+#define ADC_TR_LT ((uint32_t)0x00000FFF) /*!< Analog watchdog low threshold */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_HTR_HT ADC_TR_HT /*!< Analog watchdog high threshold */
+#define ADC_LTR_LT ADC_TR_LT /*!< Analog watchdog low threshold */
+
+/****************** Bit definition for ADC_CHSELR register ******************/
+#define ADC_CHSELR_CHSEL18 ((uint32_t)0x00040000) /*!< Channel 18 selection */
+#define ADC_CHSELR_CHSEL17 ((uint32_t)0x00020000) /*!< Channel 17 selection */
+#define ADC_CHSELR_CHSEL16 ((uint32_t)0x00010000) /*!< Channel 16 selection */
+#define ADC_CHSELR_CHSEL15 ((uint32_t)0x00008000) /*!< Channel 15 selection */
+#define ADC_CHSELR_CHSEL14 ((uint32_t)0x00004000) /*!< Channel 14 selection */
+#define ADC_CHSELR_CHSEL13 ((uint32_t)0x00002000) /*!< Channel 13 selection */
+#define ADC_CHSELR_CHSEL12 ((uint32_t)0x00001000) /*!< Channel 12 selection */
+#define ADC_CHSELR_CHSEL11 ((uint32_t)0x00000800) /*!< Channel 11 selection */
+#define ADC_CHSELR_CHSEL10 ((uint32_t)0x00000400) /*!< Channel 10 selection */
+#define ADC_CHSELR_CHSEL9 ((uint32_t)0x00000200) /*!< Channel 9 selection */
+#define ADC_CHSELR_CHSEL8 ((uint32_t)0x00000100) /*!< Channel 8 selection */
+#define ADC_CHSELR_CHSEL7 ((uint32_t)0x00000080) /*!< Channel 7 selection */
+#define ADC_CHSELR_CHSEL6 ((uint32_t)0x00000040) /*!< Channel 6 selection */
+#define ADC_CHSELR_CHSEL5 ((uint32_t)0x00000020) /*!< Channel 5 selection */
+#define ADC_CHSELR_CHSEL4 ((uint32_t)0x00000010) /*!< Channel 4 selection */
+#define ADC_CHSELR_CHSEL3 ((uint32_t)0x00000008) /*!< Channel 3 selection */
+#define ADC_CHSELR_CHSEL2 ((uint32_t)0x00000004) /*!< Channel 2 selection */
+#define ADC_CHSELR_CHSEL1 ((uint32_t)0x00000002) /*!< Channel 1 selection */
+#define ADC_CHSELR_CHSEL0 ((uint32_t)0x00000001) /*!< Channel 0 selection */
+
+/******************** Bit definition for ADC_DR register ********************/
+#define ADC_DR_DATA ((uint32_t)0x0000FFFF) /*!< Regular data */
+
+/******************* Bit definition for ADC_CCR register ********************/
+#define ADC_CCR_VBATEN ((uint32_t)0x01000000) /*!< Voltage battery enable */
+#define ADC_CCR_TSEN ((uint32_t)0x00800000) /*!< Tempurature sensore enable */
+#define ADC_CCR_VREFEN ((uint32_t)0x00400000) /*!< Vrefint enable */
+
+/******************************************************************************/
+/* */
+/* Controller Area Network (CAN ) */
+/* */
+/******************************************************************************/
+/*!<CAN control and status registers */
+/******************* Bit definition for CAN_MCR register ********************/
+#define CAN_MCR_INRQ ((uint32_t)0x00000001) /*!<Initialization Request */
+#define CAN_MCR_SLEEP ((uint32_t)0x00000002) /*!<Sleep Mode Request */
+#define CAN_MCR_TXFP ((uint32_t)0x00000004) /*!<Transmit FIFO Priority */
+#define CAN_MCR_RFLM ((uint32_t)0x00000008) /*!<Receive FIFO Locked Mode */
+#define CAN_MCR_NART ((uint32_t)0x00000010) /*!<No Automatic Retransmission */
+#define CAN_MCR_AWUM ((uint32_t)0x00000020) /*!<Automatic Wakeup Mode */
+#define CAN_MCR_ABOM ((uint32_t)0x00000040) /*!<Automatic Bus-Off Management */
+#define CAN_MCR_TTCM ((uint32_t)0x00000080) /*!<Time Triggered Communication Mode */
+#define CAN_MCR_RESET ((uint32_t)0x00008000) /*!<bxCAN software master reset */
+
+/******************* Bit definition for CAN_MSR register ********************/
+#define CAN_MSR_INAK ((uint32_t)0x00000001) /*!<Initialization Acknowledge */
+#define CAN_MSR_SLAK ((uint32_t)0x00000002) /*!<Sleep Acknowledge */
+#define CAN_MSR_ERRI ((uint32_t)0x00000004) /*!<Error Interrupt */
+#define CAN_MSR_WKUI ((uint32_t)0x00000008) /*!<Wakeup Interrupt */
+#define CAN_MSR_SLAKI ((uint32_t)0x00000010) /*!<Sleep Acknowledge Interrupt */
+#define CAN_MSR_TXM ((uint32_t)0x00000100) /*!<Transmit Mode */
+#define CAN_MSR_RXM ((uint32_t)0x00000200) /*!<Receive Mode */
+#define CAN_MSR_SAMP ((uint32_t)0x00000400) /*!<Last Sample Point */
+#define CAN_MSR_RX ((uint32_t)0x00000800) /*!<CAN Rx Signal */
+
+/******************* Bit definition for CAN_TSR register ********************/
+#define CAN_TSR_RQCP0 ((uint32_t)0x00000001) /*!<Request Completed Mailbox0 */
+#define CAN_TSR_TXOK0 ((uint32_t)0x00000002) /*!<Transmission OK of Mailbox0 */
+#define CAN_TSR_ALST0 ((uint32_t)0x00000004) /*!<Arbitration Lost for Mailbox0 */
+#define CAN_TSR_TERR0 ((uint32_t)0x00000008) /*!<Transmission Error of Mailbox0 */
+#define CAN_TSR_ABRQ0 ((uint32_t)0x00000080) /*!<Abort Request for Mailbox0 */
+#define CAN_TSR_RQCP1 ((uint32_t)0x00000100) /*!<Request Completed Mailbox1 */
+#define CAN_TSR_TXOK1 ((uint32_t)0x00000200) /*!<Transmission OK of Mailbox1 */
+#define CAN_TSR_ALST1 ((uint32_t)0x00000400) /*!<Arbitration Lost for Mailbox1 */
+#define CAN_TSR_TERR1 ((uint32_t)0x00000800) /*!<Transmission Error of Mailbox1 */
+#define CAN_TSR_ABRQ1 ((uint32_t)0x00008000) /*!<Abort Request for Mailbox 1 */
+#define CAN_TSR_RQCP2 ((uint32_t)0x00010000) /*!<Request Completed Mailbox2 */
+#define CAN_TSR_TXOK2 ((uint32_t)0x00020000) /*!<Transmission OK of Mailbox 2 */
+#define CAN_TSR_ALST2 ((uint32_t)0x00040000) /*!<Arbitration Lost for mailbox 2 */
+#define CAN_TSR_TERR2 ((uint32_t)0x00080000) /*!<Transmission Error of Mailbox 2 */
+#define CAN_TSR_ABRQ2 ((uint32_t)0x00800000) /*!<Abort Request for Mailbox 2 */
+#define CAN_TSR_CODE ((uint32_t)0x03000000) /*!<Mailbox Code */
+
+#define CAN_TSR_TME ((uint32_t)0x1C000000) /*!<TME[2:0] bits */
+#define CAN_TSR_TME0 ((uint32_t)0x04000000) /*!<Transmit Mailbox 0 Empty */
+#define CAN_TSR_TME1 ((uint32_t)0x08000000) /*!<Transmit Mailbox 1 Empty */
+#define CAN_TSR_TME2 ((uint32_t)0x10000000) /*!<Transmit Mailbox 2 Empty */
+
+#define CAN_TSR_LOW ((uint32_t)0xE0000000) /*!<LOW[2:0] bits */
+#define CAN_TSR_LOW0 ((uint32_t)0x20000000) /*!<Lowest Priority Flag for Mailbox 0 */
+#define CAN_TSR_LOW1 ((uint32_t)0x40000000) /*!<Lowest Priority Flag for Mailbox 1 */
+#define CAN_TSR_LOW2 ((uint32_t)0x80000000) /*!<Lowest Priority Flag for Mailbox 2 */
+
+/******************* Bit definition for CAN_RF0R register *******************/
+#define CAN_RF0R_FMP0 ((uint32_t)0x00000003) /*!<FIFO 0 Message Pending */
+#define CAN_RF0R_FULL0 ((uint32_t)0x00000008) /*!<FIFO 0 Full */
+#define CAN_RF0R_FOVR0 ((uint32_t)0x00000010) /*!<FIFO 0 Overrun */
+#define CAN_RF0R_RFOM0 ((uint32_t)0x00000020) /*!<Release FIFO 0 Output Mailbox */
+
+/******************* Bit definition for CAN_RF1R register *******************/
+#define CAN_RF1R_FMP1 ((uint32_t)0x00000003) /*!<FIFO 1 Message Pending */
+#define CAN_RF1R_FULL1 ((uint32_t)0x00000008) /*!<FIFO 1 Full */
+#define CAN_RF1R_FOVR1 ((uint32_t)0x00000010) /*!<FIFO 1 Overrun */
+#define CAN_RF1R_RFOM1 ((uint32_t)0x00000020) /*!<Release FIFO 1 Output Mailbox */
+
+/******************** Bit definition for CAN_IER register *******************/
+#define CAN_IER_TMEIE ((uint32_t)0x00000001) /*!<Transmit Mailbox Empty Interrupt Enable */
+#define CAN_IER_FMPIE0 ((uint32_t)0x00000002) /*!<FIFO Message Pending Interrupt Enable */
+#define CAN_IER_FFIE0 ((uint32_t)0x00000004) /*!<FIFO Full Interrupt Enable */
+#define CAN_IER_FOVIE0 ((uint32_t)0x00000008) /*!<FIFO Overrun Interrupt Enable */
+#define CAN_IER_FMPIE1 ((uint32_t)0x00000010) /*!<FIFO Message Pending Interrupt Enable */
+#define CAN_IER_FFIE1 ((uint32_t)0x00000020) /*!<FIFO Full Interrupt Enable */
+#define CAN_IER_FOVIE1 ((uint32_t)0x00000040) /*!<FIFO Overrun Interrupt Enable */
+#define CAN_IER_EWGIE ((uint32_t)0x00000100) /*!<Error Warning Interrupt Enable */
+#define CAN_IER_EPVIE ((uint32_t)0x00000200) /*!<Error Passive Interrupt Enable */
+#define CAN_IER_BOFIE ((uint32_t)0x00000400) /*!<Bus-Off Interrupt Enable */
+#define CAN_IER_LECIE ((uint32_t)0x00000800) /*!<Last Error Code Interrupt Enable */
+#define CAN_IER_ERRIE ((uint32_t)0x00008000) /*!<Error Interrupt Enable */
+#define CAN_IER_WKUIE ((uint32_t)0x00010000) /*!<Wakeup Interrupt Enable */
+#define CAN_IER_SLKIE ((uint32_t)0x00020000) /*!<Sleep Interrupt Enable */
+
+/******************** Bit definition for CAN_ESR register *******************/
+#define CAN_ESR_EWGF ((uint32_t)0x00000001) /*!<Error Warning Flag */
+#define CAN_ESR_EPVF ((uint32_t)0x00000002) /*!<Error Passive Flag */
+#define CAN_ESR_BOFF ((uint32_t)0x00000004) /*!<Bus-Off Flag */
+
+#define CAN_ESR_LEC ((uint32_t)0x00000070) /*!<LEC[2:0] bits (Last Error Code) */
+#define CAN_ESR_LEC_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define CAN_ESR_LEC_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define CAN_ESR_LEC_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define CAN_ESR_TEC ((uint32_t)0x00FF0000) /*!<Least significant byte of the 9-bit Transmit Error Counter */
+#define CAN_ESR_REC ((uint32_t)0xFF000000) /*!<Receive Error Counter */
+
+/******************* Bit definition for CAN_BTR register ********************/
+#define CAN_BTR_BRP ((uint32_t)0x000003FF) /*!<Baud Rate Prescaler */
+#define CAN_BTR_TS1 ((uint32_t)0x000F0000) /*!<Time Segment 1 */
+#define CAN_BTR_TS1_0 ((uint32_t)0x00010000) /*!<Time Segment 1 (Bit 0) */
+#define CAN_BTR_TS1_1 ((uint32_t)0x00020000) /*!<Time Segment 1 (Bit 1) */
+#define CAN_BTR_TS1_2 ((uint32_t)0x00040000) /*!<Time Segment 1 (Bit 2) */
+#define CAN_BTR_TS1_3 ((uint32_t)0x00080000) /*!<Time Segment 1 (Bit 3) */
+#define CAN_BTR_TS2 ((uint32_t)0x00700000) /*!<Time Segment 2 */
+#define CAN_BTR_TS2_0 ((uint32_t)0x00100000) /*!<Time Segment 2 (Bit 0) */
+#define CAN_BTR_TS2_1 ((uint32_t)0x00200000) /*!<Time Segment 2 (Bit 1) */
+#define CAN_BTR_TS2_2 ((uint32_t)0x00400000) /*!<Time Segment 2 (Bit 2) */
+#define CAN_BTR_SJW ((uint32_t)0x03000000) /*!<Resynchronization Jump Width */
+#define CAN_BTR_SJW_0 ((uint32_t)0x01000000) /*!<Resynchronization Jump Width (Bit 0) */
+#define CAN_BTR_SJW_1 ((uint32_t)0x02000000) /*!<Resynchronization Jump Width (Bit 1) */
+#define CAN_BTR_LBKM ((uint32_t)0x40000000) /*!<Loop Back Mode (Debug) */
+#define CAN_BTR_SILM ((uint32_t)0x80000000) /*!<Silent Mode */
+
+/*!<Mailbox registers */
+/****************** Bit definition for CAN_TI0R register ********************/
+#define CAN_TI0R_TXRQ ((uint32_t)0x00000001) /*!<Transmit Mailbox Request */
+#define CAN_TI0R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_TI0R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_TI0R_EXID ((uint32_t)0x001FFFF8) /*!<Extended Identifier */
+#define CAN_TI0R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/****************** Bit definition for CAN_TDT0R register *******************/
+#define CAN_TDT0R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_TDT0R_TGT ((uint32_t)0x00000100) /*!<Transmit Global Time */
+#define CAN_TDT0R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/****************** Bit definition for CAN_TDL0R register *******************/
+#define CAN_TDL0R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_TDL0R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_TDL0R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_TDL0R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/****************** Bit definition for CAN_TDH0R register *******************/
+#define CAN_TDH0R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_TDH0R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_TDH0R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_TDH0R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/******************* Bit definition for CAN_TI1R register *******************/
+#define CAN_TI1R_TXRQ ((uint32_t)0x00000001) /*!<Transmit Mailbox Request */
+#define CAN_TI1R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_TI1R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_TI1R_EXID ((uint32_t)0x001FFFF8) /*!<Extended Identifier */
+#define CAN_TI1R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/******************* Bit definition for CAN_TDT1R register ******************/
+#define CAN_TDT1R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_TDT1R_TGT ((uint32_t)0x00000100) /*!<Transmit Global Time */
+#define CAN_TDT1R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/******************* Bit definition for CAN_TDL1R register ******************/
+#define CAN_TDL1R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_TDL1R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_TDL1R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_TDL1R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/******************* Bit definition for CAN_TDH1R register ******************/
+#define CAN_TDH1R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_TDH1R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_TDH1R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_TDH1R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/******************* Bit definition for CAN_TI2R register *******************/
+#define CAN_TI2R_TXRQ ((uint32_t)0x00000001) /*!<Transmit Mailbox Request */
+#define CAN_TI2R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_TI2R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_TI2R_EXID ((uint32_t)0x001FFFF8) /*!<Extended identifier */
+#define CAN_TI2R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/******************* Bit definition for CAN_TDT2R register ******************/
+#define CAN_TDT2R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_TDT2R_TGT ((uint32_t)0x00000100) /*!<Transmit Global Time */
+#define CAN_TDT2R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/******************* Bit definition for CAN_TDL2R register ******************/
+#define CAN_TDL2R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_TDL2R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_TDL2R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_TDL2R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/******************* Bit definition for CAN_TDH2R register ******************/
+#define CAN_TDH2R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_TDH2R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_TDH2R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_TDH2R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/******************* Bit definition for CAN_RI0R register *******************/
+#define CAN_RI0R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_RI0R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_RI0R_EXID ((uint32_t)0x001FFFF8) /*!<Extended Identifier */
+#define CAN_RI0R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/******************* Bit definition for CAN_RDT0R register ******************/
+#define CAN_RDT0R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_RDT0R_FMI ((uint32_t)0x0000FF00) /*!<Filter Match Index */
+#define CAN_RDT0R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/******************* Bit definition for CAN_RDL0R register ******************/
+#define CAN_RDL0R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_RDL0R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_RDL0R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_RDL0R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/******************* Bit definition for CAN_RDH0R register ******************/
+#define CAN_RDH0R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_RDH0R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_RDH0R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_RDH0R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/******************* Bit definition for CAN_RI1R register *******************/
+#define CAN_RI1R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_RI1R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_RI1R_EXID ((uint32_t)0x001FFFF8) /*!<Extended identifier */
+#define CAN_RI1R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/******************* Bit definition for CAN_RDT1R register ******************/
+#define CAN_RDT1R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_RDT1R_FMI ((uint32_t)0x0000FF00) /*!<Filter Match Index */
+#define CAN_RDT1R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/******************* Bit definition for CAN_RDL1R register ******************/
+#define CAN_RDL1R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_RDL1R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_RDL1R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_RDL1R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/******************* Bit definition for CAN_RDH1R register ******************/
+#define CAN_RDH1R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_RDH1R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_RDH1R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_RDH1R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/*!<CAN filter registers */
+/******************* Bit definition for CAN_FMR register ********************/
+#define CAN_FMR_FINIT ((uint32_t)0x00000001) /*!<Filter Init Mode */
+
+/******************* Bit definition for CAN_FM1R register *******************/
+#define CAN_FM1R_FBM ((uint32_t)0x00003FFF) /*!<Filter Mode */
+#define CAN_FM1R_FBM0 ((uint32_t)0x00000001) /*!<Filter Init Mode bit 0 */
+#define CAN_FM1R_FBM1 ((uint32_t)0x00000002) /*!<Filter Init Mode bit 1 */
+#define CAN_FM1R_FBM2 ((uint32_t)0x00000004) /*!<Filter Init Mode bit 2 */
+#define CAN_FM1R_FBM3 ((uint32_t)0x00000008) /*!<Filter Init Mode bit 3 */
+#define CAN_FM1R_FBM4 ((uint32_t)0x00000010) /*!<Filter Init Mode bit 4 */
+#define CAN_FM1R_FBM5 ((uint32_t)0x00000020) /*!<Filter Init Mode bit 5 */
+#define CAN_FM1R_FBM6 ((uint32_t)0x00000040) /*!<Filter Init Mode bit 6 */
+#define CAN_FM1R_FBM7 ((uint32_t)0x00000080) /*!<Filter Init Mode bit 7 */
+#define CAN_FM1R_FBM8 ((uint32_t)0x00000100) /*!<Filter Init Mode bit 8 */
+#define CAN_FM1R_FBM9 ((uint32_t)0x00000200) /*!<Filter Init Mode bit 9 */
+#define CAN_FM1R_FBM10 ((uint32_t)0x00000400) /*!<Filter Init Mode bit 10 */
+#define CAN_FM1R_FBM11 ((uint32_t)0x00000800) /*!<Filter Init Mode bit 11 */
+#define CAN_FM1R_FBM12 ((uint32_t)0x00001000) /*!<Filter Init Mode bit 12 */
+#define CAN_FM1R_FBM13 ((uint32_t)0x00002000) /*!<Filter Init Mode bit 13 */
+
+/******************* Bit definition for CAN_FS1R register *******************/
+#define CAN_FS1R_FSC ((uint32_t)0x00003FFF) /*!<Filter Scale Configuration */
+#define CAN_FS1R_FSC0 ((uint32_t)0x00000001) /*!<Filter Scale Configuration bit 0 */
+#define CAN_FS1R_FSC1 ((uint32_t)0x00000002) /*!<Filter Scale Configuration bit 1 */
+#define CAN_FS1R_FSC2 ((uint32_t)0x00000004) /*!<Filter Scale Configuration bit 2 */
+#define CAN_FS1R_FSC3 ((uint32_t)0x00000008) /*!<Filter Scale Configuration bit 3 */
+#define CAN_FS1R_FSC4 ((uint32_t)0x00000010) /*!<Filter Scale Configuration bit 4 */
+#define CAN_FS1R_FSC5 ((uint32_t)0x00000020) /*!<Filter Scale Configuration bit 5 */
+#define CAN_FS1R_FSC6 ((uint32_t)0x00000040) /*!<Filter Scale Configuration bit 6 */
+#define CAN_FS1R_FSC7 ((uint32_t)0x00000080) /*!<Filter Scale Configuration bit 7 */
+#define CAN_FS1R_FSC8 ((uint32_t)0x00000100) /*!<Filter Scale Configuration bit 8 */
+#define CAN_FS1R_FSC9 ((uint32_t)0x00000200) /*!<Filter Scale Configuration bit 9 */
+#define CAN_FS1R_FSC10 ((uint32_t)0x00000400) /*!<Filter Scale Configuration bit 10 */
+#define CAN_FS1R_FSC11 ((uint32_t)0x00000800) /*!<Filter Scale Configuration bit 11 */
+#define CAN_FS1R_FSC12 ((uint32_t)0x00001000) /*!<Filter Scale Configuration bit 12 */
+#define CAN_FS1R_FSC13 ((uint32_t)0x00002000) /*!<Filter Scale Configuration bit 13 */
+
+/****************** Bit definition for CAN_FFA1R register *******************/
+#define CAN_FFA1R_FFA ((uint32_t)0x00003FFF) /*!<Filter FIFO Assignment */
+#define CAN_FFA1R_FFA0 ((uint32_t)0x00000001) /*!<Filter FIFO Assignment for Filter 0 */
+#define CAN_FFA1R_FFA1 ((uint32_t)0x00000002) /*!<Filter FIFO Assignment for Filter 1 */
+#define CAN_FFA1R_FFA2 ((uint32_t)0x00000004) /*!<Filter FIFO Assignment for Filter 2 */
+#define CAN_FFA1R_FFA3 ((uint32_t)0x00000008) /*!<Filter FIFO Assignment for Filter 3 */
+#define CAN_FFA1R_FFA4 ((uint32_t)0x00000010) /*!<Filter FIFO Assignment for Filter 4 */
+#define CAN_FFA1R_FFA5 ((uint32_t)0x00000020) /*!<Filter FIFO Assignment for Filter 5 */
+#define CAN_FFA1R_FFA6 ((uint32_t)0x00000040) /*!<Filter FIFO Assignment for Filter 6 */
+#define CAN_FFA1R_FFA7 ((uint32_t)0x00000080) /*!<Filter FIFO Assignment for Filter 7 */
+#define CAN_FFA1R_FFA8 ((uint32_t)0x00000100) /*!<Filter FIFO Assignment for Filter 8 */
+#define CAN_FFA1R_FFA9 ((uint32_t)0x00000200) /*!<Filter FIFO Assignment for Filter 9 */
+#define CAN_FFA1R_FFA10 ((uint32_t)0x00000400) /*!<Filter FIFO Assignment for Filter 10 */
+#define CAN_FFA1R_FFA11 ((uint32_t)0x00000800) /*!<Filter FIFO Assignment for Filter 11 */
+#define CAN_FFA1R_FFA12 ((uint32_t)0x00001000) /*!<Filter FIFO Assignment for Filter 12 */
+#define CAN_FFA1R_FFA13 ((uint32_t)0x00002000) /*!<Filter FIFO Assignment for Filter 13 */
+
+/******************* Bit definition for CAN_FA1R register *******************/
+#define CAN_FA1R_FACT ((uint32_t)0x00003FFF) /*!<Filter Active */
+#define CAN_FA1R_FACT0 ((uint32_t)0x00000001) /*!<Filter 0 Active */
+#define CAN_FA1R_FACT1 ((uint32_t)0x00000002) /*!<Filter 1 Active */
+#define CAN_FA1R_FACT2 ((uint32_t)0x00000004) /*!<Filter 2 Active */
+#define CAN_FA1R_FACT3 ((uint32_t)0x00000008) /*!<Filter 3 Active */
+#define CAN_FA1R_FACT4 ((uint32_t)0x00000010) /*!<Filter 4 Active */
+#define CAN_FA1R_FACT5 ((uint32_t)0x00000020) /*!<Filter 5 Active */
+#define CAN_FA1R_FACT6 ((uint32_t)0x00000040) /*!<Filter 6 Active */
+#define CAN_FA1R_FACT7 ((uint32_t)0x00000080) /*!<Filter 7 Active */
+#define CAN_FA1R_FACT8 ((uint32_t)0x00000100) /*!<Filter 8 Active */
+#define CAN_FA1R_FACT9 ((uint32_t)0x00000200) /*!<Filter 9 Active */
+#define CAN_FA1R_FACT10 ((uint32_t)0x00000400) /*!<Filter 10 Active */
+#define CAN_FA1R_FACT11 ((uint32_t)0x00000800) /*!<Filter 11 Active */
+#define CAN_FA1R_FACT12 ((uint32_t)0x00001000) /*!<Filter 12 Active */
+#define CAN_FA1R_FACT13 ((uint32_t)0x00002000) /*!<Filter 13 Active */
+
+/******************* Bit definition for CAN_F0R1 register *******************/
+#define CAN_F0R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F0R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F0R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F0R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F0R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F0R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F0R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F0R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F0R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F0R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F0R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F0R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F0R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F0R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F0R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F0R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F0R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F0R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F0R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F0R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F0R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F0R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F0R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F0R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F0R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F0R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F0R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F0R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F0R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F0R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F0R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F0R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F1R1 register *******************/
+#define CAN_F1R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F1R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F1R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F1R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F1R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F1R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F1R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F1R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F1R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F1R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F1R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F1R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F1R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F1R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F1R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F1R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F1R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F1R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F1R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F1R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F1R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F1R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F1R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F1R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F1R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F1R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F1R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F1R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F1R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F1R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F1R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F1R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F2R1 register *******************/
+#define CAN_F2R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F2R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F2R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F2R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F2R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F2R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F2R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F2R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F2R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F2R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F2R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F2R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F2R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F2R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F2R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F2R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F2R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F2R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F2R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F2R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F2R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F2R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F2R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F2R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F2R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F2R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F2R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F2R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F2R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F2R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F2R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F2R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F3R1 register *******************/
+#define CAN_F3R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F3R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F3R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F3R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F3R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F3R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F3R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F3R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F3R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F3R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F3R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F3R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F3R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F3R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F3R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F3R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F3R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F3R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F3R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F3R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F3R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F3R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F3R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F3R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F3R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F3R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F3R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F3R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F3R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F3R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F3R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F3R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F4R1 register *******************/
+#define CAN_F4R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F4R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F4R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F4R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F4R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F4R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F4R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F4R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F4R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F4R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F4R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F4R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F4R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F4R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F4R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F4R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F4R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F4R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F4R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F4R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F4R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F4R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F4R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F4R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F4R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F4R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F4R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F4R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F4R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F4R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F4R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F4R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F5R1 register *******************/
+#define CAN_F5R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F5R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F5R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F5R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F5R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F5R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F5R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F5R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F5R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F5R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F5R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F5R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F5R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F5R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F5R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F5R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F5R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F5R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F5R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F5R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F5R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F5R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F5R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F5R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F5R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F5R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F5R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F5R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F5R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F5R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F5R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F5R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F6R1 register *******************/
+#define CAN_F6R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F6R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F6R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F6R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F6R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F6R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F6R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F6R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F6R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F6R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F6R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F6R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F6R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F6R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F6R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F6R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F6R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F6R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F6R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F6R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F6R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F6R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F6R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F6R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F6R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F6R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F6R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F6R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F6R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F6R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F6R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F6R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F7R1 register *******************/
+#define CAN_F7R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F7R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F7R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F7R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F7R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F7R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F7R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F7R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F7R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F7R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F7R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F7R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F7R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F7R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F7R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F7R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F7R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F7R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F7R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F7R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F7R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F7R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F7R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F7R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F7R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F7R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F7R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F7R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F7R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F7R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F7R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F7R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F8R1 register *******************/
+#define CAN_F8R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F8R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F8R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F8R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F8R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F8R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F8R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F8R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F8R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F8R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F8R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F8R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F8R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F8R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F8R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F8R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F8R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F8R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F8R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F8R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F8R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F8R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F8R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F8R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F8R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F8R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F8R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F8R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F8R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F8R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F8R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F8R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F9R1 register *******************/
+#define CAN_F9R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F9R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F9R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F9R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F9R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F9R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F9R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F9R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F9R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F9R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F9R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F9R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F9R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F9R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F9R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F9R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F9R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F9R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F9R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F9R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F9R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F9R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F9R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F9R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F9R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F9R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F9R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F9R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F9R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F9R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F9R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F9R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F10R1 register ******************/
+#define CAN_F10R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F10R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F10R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F10R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F10R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F10R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F10R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F10R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F10R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F10R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F10R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F10R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F10R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F10R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F10R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F10R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F10R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F10R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F10R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F10R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F10R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F10R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F10R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F10R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F10R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F10R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F10R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F10R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F10R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F10R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F10R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F10R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F11R1 register ******************/
+#define CAN_F11R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F11R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F11R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F11R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F11R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F11R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F11R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F11R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F11R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F11R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F11R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F11R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F11R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F11R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F11R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F11R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F11R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F11R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F11R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F11R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F11R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F11R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F11R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F11R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F11R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F11R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F11R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F11R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F11R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F11R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F11R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F11R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F12R1 register ******************/
+#define CAN_F12R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F12R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F12R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F12R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F12R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F12R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F12R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F12R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F12R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F12R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F12R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F12R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F12R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F12R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F12R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F12R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F12R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F12R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F12R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F12R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F12R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F12R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F12R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F12R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F12R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F12R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F12R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F12R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F12R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F12R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F12R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F12R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F13R1 register ******************/
+#define CAN_F13R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F13R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F13R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F13R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F13R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F13R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F13R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F13R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F13R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F13R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F13R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F13R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F13R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F13R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F13R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F13R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F13R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F13R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F13R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F13R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F13R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F13R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F13R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F13R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F13R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F13R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F13R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F13R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F13R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F13R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F13R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F13R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F0R2 register *******************/
+#define CAN_F0R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F0R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F0R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F0R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F0R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F0R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F0R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F0R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F0R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F0R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F0R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F0R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F0R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F0R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F0R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F0R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F0R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F0R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F0R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F0R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F0R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F0R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F0R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F0R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F0R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F0R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F0R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F0R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F0R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F0R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F0R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F0R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F1R2 register *******************/
+#define CAN_F1R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F1R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F1R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F1R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F1R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F1R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F1R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F1R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F1R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F1R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F1R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F1R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F1R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F1R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F1R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F1R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F1R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F1R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F1R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F1R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F1R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F1R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F1R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F1R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F1R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F1R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F1R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F1R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F1R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F1R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F1R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F1R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F2R2 register *******************/
+#define CAN_F2R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F2R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F2R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F2R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F2R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F2R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F2R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F2R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F2R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F2R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F2R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F2R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F2R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F2R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F2R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F2R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F2R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F2R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F2R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F2R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F2R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F2R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F2R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F2R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F2R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F2R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F2R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F2R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F2R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F2R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F2R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F2R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F3R2 register *******************/
+#define CAN_F3R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F3R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F3R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F3R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F3R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F3R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F3R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F3R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F3R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F3R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F3R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F3R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F3R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F3R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F3R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F3R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F3R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F3R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F3R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F3R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F3R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F3R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F3R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F3R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F3R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F3R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F3R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F3R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F3R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F3R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F3R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F3R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F4R2 register *******************/
+#define CAN_F4R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F4R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F4R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F4R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F4R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F4R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F4R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F4R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F4R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F4R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F4R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F4R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F4R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F4R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F4R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F4R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F4R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F4R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F4R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F4R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F4R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F4R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F4R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F4R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F4R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F4R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F4R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F4R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F4R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F4R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F4R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F4R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F5R2 register *******************/
+#define CAN_F5R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F5R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F5R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F5R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F5R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F5R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F5R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F5R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F5R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F5R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F5R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F5R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F5R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F5R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F5R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F5R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F5R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F5R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F5R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F5R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F5R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F5R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F5R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F5R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F5R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F5R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F5R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F5R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F5R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F5R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F5R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F5R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F6R2 register *******************/
+#define CAN_F6R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F6R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F6R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F6R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F6R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F6R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F6R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F6R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F6R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F6R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F6R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F6R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F6R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F6R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F6R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F6R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F6R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F6R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F6R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F6R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F6R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F6R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F6R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F6R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F6R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F6R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F6R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F6R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F6R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F6R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F6R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F6R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F7R2 register *******************/
+#define CAN_F7R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F7R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F7R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F7R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F7R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F7R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F7R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F7R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F7R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F7R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F7R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F7R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F7R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F7R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F7R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F7R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F7R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F7R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F7R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F7R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F7R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F7R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F7R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F7R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F7R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F7R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F7R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F7R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F7R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F7R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F7R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F7R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F8R2 register *******************/
+#define CAN_F8R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F8R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F8R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F8R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F8R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F8R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F8R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F8R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F8R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F8R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F8R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F8R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F8R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F8R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F8R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F8R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F8R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F8R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F8R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F8R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F8R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F8R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F8R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F8R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F8R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F8R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F8R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F8R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F8R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F8R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F8R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F8R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F9R2 register *******************/
+#define CAN_F9R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F9R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F9R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F9R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F9R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F9R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F9R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F9R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F9R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F9R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F9R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F9R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F9R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F9R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F9R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F9R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F9R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F9R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F9R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F9R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F9R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F9R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F9R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F9R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F9R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F9R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F9R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F9R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F9R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F9R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F9R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F9R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F10R2 register ******************/
+#define CAN_F10R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F10R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F10R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F10R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F10R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F10R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F10R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F10R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F10R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F10R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F10R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F10R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F10R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F10R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F10R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F10R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F10R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F10R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F10R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F10R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F10R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F10R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F10R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F10R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F10R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F10R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F10R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F10R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F10R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F10R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F10R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F10R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F11R2 register ******************/
+#define CAN_F11R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F11R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F11R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F11R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F11R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F11R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F11R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F11R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F11R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F11R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F11R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F11R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F11R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F11R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F11R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F11R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F11R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F11R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F11R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F11R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F11R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F11R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F11R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F11R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F11R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F11R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F11R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F11R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F11R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F11R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F11R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F11R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F12R2 register ******************/
+#define CAN_F12R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F12R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F12R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F12R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F12R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F12R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F12R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F12R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F12R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F12R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F12R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F12R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F12R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F12R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F12R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F12R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F12R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F12R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F12R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F12R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F12R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F12R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F12R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F12R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F12R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F12R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F12R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F12R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F12R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F12R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F12R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F12R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F13R2 register ******************/
+#define CAN_F13R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F13R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F13R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F13R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F13R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F13R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F13R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F13R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F13R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F13R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F13R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F13R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F13R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F13R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F13R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F13R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F13R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F13R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F13R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F13R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F13R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F13R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F13R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F13R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F13R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F13R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F13R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F13R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F13R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F13R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F13R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F13R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************************************************************************/
+/* */
+/* HDMI-CEC (CEC) */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for CEC_CR register *********************/
+#define CEC_CR_CECEN ((uint32_t)0x00000001) /*!< CEC Enable */
+#define CEC_CR_TXSOM ((uint32_t)0x00000002) /*!< CEC Tx Start Of Message */
+#define CEC_CR_TXEOM ((uint32_t)0x00000004) /*!< CEC Tx End Of Message */
+
+/******************* Bit definition for CEC_CFGR register *******************/
+#define CEC_CFGR_SFT ((uint32_t)0x00000007) /*!< CEC Signal Free Time */
+#define CEC_CFGR_RXTOL ((uint32_t)0x00000008) /*!< CEC Tolerance */
+#define CEC_CFGR_BRESTP ((uint32_t)0x00000010) /*!< CEC Rx Stop */
+#define CEC_CFGR_BREGEN ((uint32_t)0x00000020) /*!< CEC Bit Rising Error generation */
+#define CEC_CFGR_LBPEGEN ((uint32_t)0x00000040) /*!< CEC Long Bit Period Error gener. */
+#define CEC_CFGR_BRDNOGEN ((uint32_t)0x00000080) /*!< CEC Broadcast No Error generation */
+#define CEC_CFGR_SFTOPT ((uint32_t)0x00000100) /*!< CEC Signal Free Time optional */
+#define CEC_CFGR_OAR ((uint32_t)0x7FFF0000) /*!< CEC Own Address */
+#define CEC_CFGR_LSTN ((uint32_t)0x80000000) /*!< CEC Listen mode */
+
+/******************* Bit definition for CEC_TXDR register *******************/
+#define CEC_TXDR_TXD ((uint32_t)0x000000FF) /*!< CEC Tx Data */
+
+/******************* Bit definition for CEC_RXDR register *******************/
+#define CEC_TXDR_RXD ((uint32_t)0x000000FF) /*!< CEC Rx Data */
+
+/******************* Bit definition for CEC_ISR register ********************/
+#define CEC_ISR_RXBR ((uint32_t)0x00000001) /*!< CEC Rx-Byte Received */
+#define CEC_ISR_RXEND ((uint32_t)0x00000002) /*!< CEC End Of Reception */
+#define CEC_ISR_RXOVR ((uint32_t)0x00000004) /*!< CEC Rx-Overrun */
+#define CEC_ISR_BRE ((uint32_t)0x00000008) /*!< CEC Rx Bit Rising Error */
+#define CEC_ISR_SBPE ((uint32_t)0x00000010) /*!< CEC Rx Short Bit period Error */
+#define CEC_ISR_LBPE ((uint32_t)0x00000020) /*!< CEC Rx Long Bit period Error */
+#define CEC_ISR_RXACKE ((uint32_t)0x00000040) /*!< CEC Rx Missing Acknowledge */
+#define CEC_ISR_ARBLST ((uint32_t)0x00000080) /*!< CEC Arbitration Lost */
+#define CEC_ISR_TXBR ((uint32_t)0x00000100) /*!< CEC Tx Byte Request */
+#define CEC_ISR_TXEND ((uint32_t)0x00000200) /*!< CEC End of Transmission */
+#define CEC_ISR_TXUDR ((uint32_t)0x00000400) /*!< CEC Tx-Buffer Underrun */
+#define CEC_ISR_TXERR ((uint32_t)0x00000800) /*!< CEC Tx-Error */
+#define CEC_ISR_TXACKE ((uint32_t)0x00001000) /*!< CEC Tx Missing Acknowledge */
+
+/******************* Bit definition for CEC_IER register ********************/
+#define CEC_IER_RXBRIE ((uint32_t)0x00000001) /*!< CEC Rx-Byte Received IT Enable */
+#define CEC_IER_RXENDIE ((uint32_t)0x00000002) /*!< CEC End Of Reception IT Enable */
+#define CEC_IER_RXOVRIE ((uint32_t)0x00000004) /*!< CEC Rx-Overrun IT Enable */
+#define CEC_IER_BREIE ((uint32_t)0x00000008) /*!< CEC Rx Bit Rising Error IT Enable */
+#define CEC_IER_SBPEIE ((uint32_t)0x00000010) /*!< CEC Rx Short Bit period Error IT Enable*/
+#define CEC_IER_LBPEIE ((uint32_t)0x00000020) /*!< CEC Rx Long Bit period Error IT Enable */
+#define CEC_IER_RXACKEIE ((uint32_t)0x00000040) /*!< CEC Rx Missing Acknowledge IT Enable */
+#define CEC_IER_ARBLSTIE ((uint32_t)0x00000080) /*!< CEC Arbitration Lost IT Enable */
+#define CEC_IER_TXBRIE ((uint32_t)0x00000100) /*!< CEC Tx Byte Request IT Enable */
+#define CEC_IER_TXENDIE ((uint32_t)0x00000200) /*!< CEC End of Transmission IT Enable */
+#define CEC_IER_TXUDRIE ((uint32_t)0x00000400) /*!< CEC Tx-Buffer Underrun IT Enable */
+#define CEC_IER_TXERRIE ((uint32_t)0x00000800) /*!< CEC Tx-Error IT Enable */
+#define CEC_IER_TXACKEIE ((uint32_t)0x00001000) /*!< CEC Tx Missing Acknowledge IT Enable */
+
+
+/******************************************************************************/
+/* */
+/* Analog Comparators (COMP) */
+/* */
+/******************************************************************************/
+/*********************** Bit definition for COMP_CSR register ***************/
+/* COMP1 bits definition */
+#define COMP_CSR_COMP1EN ((uint32_t)0x00000001) /*!< COMP1 enable */
+#define COMP_CSR_COMP1SW1 ((uint32_t)0x00000002) /*!< SW1 switch control */
+#define COMP_CSR_COMP1MODE ((uint32_t)0x0000000C) /*!< COMP1 power mode */
+#define COMP_CSR_COMP1MODE_0 ((uint32_t)0x00000004) /*!< COMP1 power mode bit 0 */
+#define COMP_CSR_COMP1MODE_1 ((uint32_t)0x00000008) /*!< COMP1 power mode bit 1 */
+#define COMP_CSR_COMP1INSEL ((uint32_t)0x00000070) /*!< COMP1 inverting input select */
+#define COMP_CSR_COMP1INSEL_0 ((uint32_t)0x00000010) /*!< COMP1 inverting input select bit 0 */
+#define COMP_CSR_COMP1INSEL_1 ((uint32_t)0x00000020) /*!< COMP1 inverting input select bit 1 */
+#define COMP_CSR_COMP1INSEL_2 ((uint32_t)0x00000040) /*!< COMP1 inverting input select bit 2 */
+#define COMP_CSR_COMP1OUTSEL ((uint32_t)0x00000700) /*!< COMP1 output select */
+#define COMP_CSR_COMP1OUTSEL_0 ((uint32_t)0x00000100) /*!< COMP1 output select bit 0 */
+#define COMP_CSR_COMP1OUTSEL_1 ((uint32_t)0x00000200) /*!< COMP1 output select bit 1 */
+#define COMP_CSR_COMP1OUTSEL_2 ((uint32_t)0x00000400) /*!< COMP1 output select bit 2 */
+#define COMP_CSR_COMP1POL ((uint32_t)0x00000800) /*!< COMP1 output polarity */
+#define COMP_CSR_COMP1HYST ((uint32_t)0x00003000) /*!< COMP1 hysteresis */
+#define COMP_CSR_COMP1HYST_0 ((uint32_t)0x00001000) /*!< COMP1 hysteresis bit 0 */
+#define COMP_CSR_COMP1HYST_1 ((uint32_t)0x00002000) /*!< COMP1 hysteresis bit 1 */
+#define COMP_CSR_COMP1OUT ((uint32_t)0x00004000) /*!< COMP1 output level */
+#define COMP_CSR_COMP1LOCK ((uint32_t)0x00008000) /*!< COMP1 lock */
+/* COMP2 bits definition */
+#define COMP_CSR_COMP2EN ((uint32_t)0x00010000) /*!< COMP2 enable */
+#define COMP_CSR_COMP2MODE ((uint32_t)0x000C0000) /*!< COMP2 power mode */
+#define COMP_CSR_COMP2MODE_0 ((uint32_t)0x00040000) /*!< COMP2 power mode bit 0 */
+#define COMP_CSR_COMP2MODE_1 ((uint32_t)0x00080000) /*!< COMP2 power mode bit 1 */
+#define COMP_CSR_COMP2INSEL ((uint32_t)0x00700000) /*!< COMP2 inverting input select */
+#define COMP_CSR_COMP2INSEL_0 ((uint32_t)0x00100000) /*!< COMP2 inverting input select bit 0 */
+#define COMP_CSR_COMP2INSEL_1 ((uint32_t)0x00200000) /*!< COMP2 inverting input select bit 1 */
+#define COMP_CSR_COMP2INSEL_2 ((uint32_t)0x00400000) /*!< COMP2 inverting input select bit 2 */
+#define COMP_CSR_WNDWEN ((uint32_t)0x00800000) /*!< Comparators window mode enable */
+#define COMP_CSR_COMP2OUTSEL ((uint32_t)0x07000000) /*!< COMP2 output select */
+#define COMP_CSR_COMP2OUTSEL_0 ((uint32_t)0x01000000) /*!< COMP2 output select bit 0 */
+#define COMP_CSR_COMP2OUTSEL_1 ((uint32_t)0x02000000) /*!< COMP2 output select bit 1 */
+#define COMP_CSR_COMP2OUTSEL_2 ((uint32_t)0x04000000) /*!< COMP2 output select bit 2 */
+#define COMP_CSR_COMP2POL ((uint32_t)0x08000000) /*!< COMP2 output polarity */
+#define COMP_CSR_COMP2HYST ((uint32_t)0x30000000) /*!< COMP2 hysteresis */
+#define COMP_CSR_COMP2HYST_0 ((uint32_t)0x10000000) /*!< COMP2 hysteresis bit 0 */
+#define COMP_CSR_COMP2HYST_1 ((uint32_t)0x20000000) /*!< COMP2 hysteresis bit 1 */
+#define COMP_CSR_COMP2OUT ((uint32_t)0x40000000) /*!< COMP2 output level */
+#define COMP_CSR_COMP2LOCK ((uint32_t)0x80000000) /*!< COMP2 lock */
+/* COMPx bits definition */
+#define COMP_CSR_COMPxEN ((uint16_t)0x0001) /*!< COMPx enable */
+#define COMP_CSR_COMPxMODE ((uint16_t)0x000C) /*!< COMPx power mode */
+#define COMP_CSR_COMPxMODE_0 ((uint16_t)0x0004) /*!< COMPx power mode bit 0 */
+#define COMP_CSR_COMPxMODE_1 ((uint16_t)0x0008) /*!< COMPx power mode bit 1 */
+#define COMP_CSR_COMPxINSEL ((uint16_t)0x0070) /*!< COMPx inverting input select */
+#define COMP_CSR_COMPxINSEL_0 ((uint16_t)0x0010) /*!< COMPx inverting input select bit 0 */
+#define COMP_CSR_COMPxINSEL_1 ((uint16_t)0x0020) /*!< COMPx inverting input select bit 1 */
+#define COMP_CSR_COMPxINSEL_2 ((uint16_t)0x0040) /*!< COMPx inverting input select bit 2 */
+#define COMP_CSR_COMPxOUTSEL ((uint16_t)0x0700) /*!< COMPx output select */
+#define COMP_CSR_COMPxOUTSEL_0 ((uint16_t)0x0100) /*!< COMPx output select bit 0 */
+#define COMP_CSR_COMPxOUTSEL_1 ((uint16_t)0x0200) /*!< COMPx output select bit 1 */
+#define COMP_CSR_COMPxOUTSEL_2 ((uint16_t)0x0400) /*!< COMPx output select bit 2 */
+#define COMP_CSR_COMPxPOL ((uint16_t)0x0800) /*!< COMPx output polarity */
+#define COMP_CSR_COMPxHYST ((uint16_t)0x3000) /*!< COMPx hysteresis */
+#define COMP_CSR_COMPxHYST_0 ((uint16_t)0x1000) /*!< COMPx hysteresis bit 0 */
+#define COMP_CSR_COMPxHYST_1 ((uint16_t)0x2000) /*!< COMPx hysteresis bit 1 */
+#define COMP_CSR_COMPxOUT ((uint16_t)0x4000) /*!< COMPx output level */
+#define COMP_CSR_COMPxLOCK ((uint16_t)0x8000) /*!< COMPx lock */
+
+/******************************************************************************/
+/* */
+/* CRC calculation unit (CRC) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for CRC_DR register *********************/
+#define CRC_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data register bits */
+
+/******************* Bit definition for CRC_IDR register ********************/
+#define CRC_IDR_IDR ((uint8_t)0xFF) /*!< General-purpose 8-bit data register bits */
+
+/******************** Bit definition for CRC_CR register ********************/
+#define CRC_CR_RESET ((uint32_t)0x00000001) /*!< RESET the CRC computation unit bit */
+#define CRC_CR_POLYSIZE ((uint32_t)0x00000018) /*!< Polynomial size bits */
+#define CRC_CR_POLYSIZE_0 ((uint32_t)0x00000008) /*!< Polynomial size bit 0 */
+#define CRC_CR_POLYSIZE_1 ((uint32_t)0x00000010) /*!< Polynomial size bit 1 */
+#define CRC_CR_REV_IN ((uint32_t)0x00000060) /*!< REV_IN Reverse Input Data bits */
+#define CRC_CR_REV_IN_0 ((uint32_t)0x00000020) /*!< REV_IN Bit 0 */
+#define CRC_CR_REV_IN_1 ((uint32_t)0x00000040) /*!< REV_IN Bit 1 */
+#define CRC_CR_REV_OUT ((uint32_t)0x00000080) /*!< REV_OUT Reverse Output Data bits */
+
+/******************* Bit definition for CRC_INIT register *******************/
+#define CRC_INIT_INIT ((uint32_t)0xFFFFFFFF) /*!< Initial CRC value bits */
+
+/******************* Bit definition for CRC_POL register ********************/
+#define CRC_POL_POL ((uint32_t)0xFFFFFFFF) /*!< Coefficients of the polynomial */
+
+/******************************************************************************/
+/* */
+/* CRS Clock Recovery System */
+/******************************************************************************/
+
+/******************* Bit definition for CRS_CR register *********************/
+#define CRS_CR_SYNCOKIE ((uint32_t)0x00000001) /* SYNC event OK interrupt enable */
+#define CRS_CR_SYNCWARNIE ((uint32_t)0x00000002) /* SYNC warning interrupt enable */
+#define CRS_CR_ERRIE ((uint32_t)0x00000004) /* SYNC error interrupt enable */
+#define CRS_CR_ESYNCIE ((uint32_t)0x00000008) /* Expected SYNC(ESYNCF) interrupt Enable*/
+#define CRS_CR_CEN ((uint32_t)0x00000020) /* Frequency error counter enable */
+#define CRS_CR_AUTOTRIMEN ((uint32_t)0x00000040) /* Automatic trimming enable */
+#define CRS_CR_SWSYNC ((uint32_t)0x00000080) /* A Software SYNC event is generated */
+#define CRS_CR_TRIM ((uint32_t)0x00003F00) /* HSI48 oscillator smooth trimming */
+
+/******************* Bit definition for CRS_CFGR register *********************/
+#define CRS_CFGR_RELOAD ((uint32_t)0x0000FFFF) /* Counter reload value */
+#define CRS_CFGR_FELIM ((uint32_t)0x00FF0000) /* Frequency error limit */
+
+#define CRS_CFGR_SYNCDIV ((uint32_t)0x07000000) /* SYNC divider */
+#define CRS_CFGR_SYNCDIV_0 ((uint32_t)0x01000000) /* Bit 0 */
+#define CRS_CFGR_SYNCDIV_1 ((uint32_t)0x02000000) /* Bit 1 */
+#define CRS_CFGR_SYNCDIV_2 ((uint32_t)0x04000000) /* Bit 2 */
+
+#define CRS_CFGR_SYNCSRC ((uint32_t)0x30000000) /* SYNC signal source selection */
+#define CRS_CFGR_SYNCSRC_0 ((uint32_t)0x10000000) /* Bit 0 */
+#define CRS_CFGR_SYNCSRC_1 ((uint32_t)0x20000000) /* Bit 1 */
+
+#define CRS_CFGR_SYNCPOL ((uint32_t)0x80000000) /* SYNC polarity selection */
+
+/******************* Bit definition for CRS_ISR register *********************/
+#define CRS_ISR_SYNCOKF ((uint32_t)0x00000001) /* SYNC event OK flag */
+#define CRS_ISR_SYNCWARNF ((uint32_t)0x00000002) /* SYNC warning */
+#define CRS_ISR_ERRF ((uint32_t)0x00000004) /* SYNC error flag */
+#define CRS_ISR_ESYNCF ((uint32_t)0x00000008) /* Expected SYNC flag */
+#define CRS_ISR_SYNCERR ((uint32_t)0x00000100) /* SYNC error */
+#define CRS_ISR_SYNCMISS ((uint32_t)0x00000200) /* SYNC missed */
+#define CRS_ISR_TRIMOVF ((uint32_t)0x00000400) /* Trimming overflow or underflow */
+#define CRS_ISR_FEDIR ((uint32_t)0x00008000) /* Frequency error direction */
+#define CRS_ISR_FECAP ((uint32_t)0xFFFF0000) /* Frequency error capture */
+
+/******************* Bit definition for CRS_ICR register *********************/
+#define CRS_ICR_SYNCOKC ((uint32_t)0x00000001) /* SYNC event OK clear flag */
+#define CRS_ICR_SYNCWARNC ((uint32_t)0x00000002) /* SYNC warning clear flag */
+#define CRS_ICR_ERRC ((uint32_t)0x00000004) /* Error clear flag */
+#define CRS_ICR_ESYNCC ((uint32_t)0x00000008) /* Expected SYNC clear flag */
+
+/******************************************************************************/
+/* */
+/* Digital to Analog Converter (DAC) */
+/* */
+/******************************************************************************/
+/******************** Bit definition for DAC_CR register ********************/
+#define DAC_CR_EN1 ((uint32_t)0x00000001) /*!< DAC channel1 enable */
+#define DAC_CR_BOFF1 ((uint32_t)0x00000002) /*!< DAC channel1 output buffer disable */
+#define DAC_CR_TEN1 ((uint32_t)0x00000004) /*!< DAC channel1 Trigger enable */
+
+#define DAC_CR_TSEL1 ((uint32_t)0x00000038) /*!< TSEL1[2:0] (DAC channel1 Trigger selection) */
+#define DAC_CR_TSEL1_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define DAC_CR_TSEL1_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define DAC_CR_TSEL1_2 ((uint32_t)0x00000020) /*!< Bit 2 */
+
+#define DAC_CR_WAVE1 ((uint32_t)0x000000C0) /*!< WAVE1[1:0] (DAC channel1 noise/triangle wave generation enable) */
+#define DAC_CR_WAVE1_0 ((uint32_t)0x00000040) /*!< Bit 0 */
+#define DAC_CR_WAVE1_1 ((uint32_t)0x00000080) /*!< Bit 1 */
+
+#define DAC_CR_MAMP1 ((uint32_t)0x00000F00) /*!< MAMP1[3:0] (DAC channel1 Mask/Amplitude selector) */
+#define DAC_CR_MAMP1_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define DAC_CR_MAMP1_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define DAC_CR_MAMP1_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define DAC_CR_MAMP1_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+
+#define DAC_CR_DMAEN1 ((uint32_t)0x00001000) /*!< DAC channel1 DMA enable */
+#define DAC_CR_DMAUDRIE1 ((uint32_t)0x00002000) /*!< DAC channel1 DMA Underrun Interrupt enable */
+
+#define DAC_CR_EN2 ((uint32_t)0x00010000) /*!< DAC channel2 enable */
+#define DAC_CR_BOFF2 ((uint32_t)0x00020000) /*!< DAC channel2 output buffer disable */
+#define DAC_CR_TEN2 ((uint32_t)0x00040000) /*!< DAC channel2 Trigger enable */
+
+#define DAC_CR_TSEL2 ((uint32_t)0x00380000) /*!< TSEL2[2:0] (DAC channel2 Trigger selection) */
+#define DAC_CR_TSEL2_0 ((uint32_t)0x00080000) /*!< Bit 0 */
+#define DAC_CR_TSEL2_1 ((uint32_t)0x00100000) /*!< Bit 1 */
+#define DAC_CR_TSEL2_2 ((uint32_t)0x00200000) /*!< Bit 2 */
+
+#define DAC_CR_WAVE2 ((uint32_t)0x00C00000) /*!< WAVE2[1:0] (DAC channel2 noise/triangle wave generation enable) */
+#define DAC_CR_WAVE2_0 ((uint32_t)0x00400000) /*!< Bit 0 */
+#define DAC_CR_WAVE2_1 ((uint32_t)0x00800000) /*!< Bit 1 */
+
+#define DAC_CR_MAMP2 ((uint32_t)0x0F000000) /*!< MAMP2[3:0] (DAC channel2 Mask/Amplitude selector) */
+#define DAC_CR_MAMP2_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define DAC_CR_MAMP2_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define DAC_CR_MAMP2_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+#define DAC_CR_MAMP2_3 ((uint32_t)0x08000000) /*!< Bit 3 */
+
+#define DAC_CR_DMAEN2 ((uint32_t)0x10000000) /*!< DAC channel2 DMA enabled */
+#define DAC_CR_DMAUDRIE2 ((uint32_t)0x20000000) /*!< DAC channel2 DMA Underrun Interrupt enable */
+
+/***************** Bit definition for DAC_SWTRIGR register ******************/
+#define DAC_SWTRIGR_SWTRIG1 ((uint32_t)0x00000001) /*!< DAC channel1 software trigger */
+#define DAC_SWTRIGR_SWTRIG2 ((uint32_t)0x00000002) /*!< DAC channel2 software trigger */
+
+/***************** Bit definition for DAC_DHR12R1 register ******************/
+#define DAC_DHR12R1_DACC1DHR ((uint32_t)0x00000FFF) /*!< DAC channel1 12-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12L1 register ******************/
+#define DAC_DHR12L1_DACC1DHR ((uint32_t)0x0000FFF0) /*!< DAC channel1 12-bit Left aligned data */
+
+/****************** Bit definition for DAC_DHR8R1 register ******************/
+#define DAC_DHR8R1_DACC1DHR ((uint32_t)0x000000FF) /*!< DAC channel1 8-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12R2 register ******************/
+#define DAC_DHR12R2_DACC2DHR ((uint32_t)0x00000FFF) /*!< DAC channel2 12-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12L2 register ******************/
+#define DAC_DHR12L2_DACC2DHR ((uint32_t)0x0000FFF0) /*!< DAC channel2 12-bit Left aligned data */
+
+/****************** Bit definition for DAC_DHR8R2 register ******************/
+#define DAC_DHR8R2_DACC2DHR ((uint32_t)0x000000FF) /*!< DAC channel2 8-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12RD register ******************/
+#define DAC_DHR12RD_DACC1DHR ((uint32_t)0x00000FFF) /*!< DAC channel1 12-bit Right aligned data */
+#define DAC_DHR12RD_DACC2DHR ((uint32_t)0x0FFF0000) /*!< DAC channel2 12-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12LD register ******************/
+#define DAC_DHR12LD_DACC1DHR ((uint32_t)0x0000FFF0) /*!< DAC channel1 12-bit Left aligned data */
+#define DAC_DHR12LD_DACC2DHR ((uint32_t)0xFFF00000) /*!< DAC channel2 12-bit Left aligned data */
+
+/****************** Bit definition for DAC_DHR8RD register ******************/
+#define DAC_DHR8RD_DACC1DHR ((uint32_t)0x000000FF) /*!< DAC channel1 8-bit Right aligned data */
+#define DAC_DHR8RD_DACC2DHR ((uint32_t)0x0000FF00) /*!< DAC channel2 8-bit Right aligned data */
+
+/******************* Bit definition for DAC_DOR1 register *******************/
+#define DAC_DOR1_DACC1DOR ((uint32_t)0x00000FFF) /*!< DAC channel1 data output */
+
+/******************* Bit definition for DAC_DOR2 register *******************/
+#define DAC_DOR2_DACC2DOR ((uint32_t)0x00000FFF) /*!< DAC channel2 data output */
+
+/******************** Bit definition for DAC_SR register ********************/
+#define DAC_SR_DMAUDR1 ((uint32_t)0x00002000) /*!< DAC channel1 DMA underrun flag */
+#define DAC_SR_DMAUDR2 ((uint32_t)0x20000000) /*!< DAC channel2 DMA underrun flag */
+
+/******************************************************************************/
+/* */
+/* Debug MCU (DBGMCU) */
+/* */
+/******************************************************************************/
+
+/**************** Bit definition for DBGMCU_IDCODE register *****************/
+#define DBGMCU_IDCODE_DEV_ID ((uint32_t)0x00000FFF) /*!< Device Identifier */
+
+#define DBGMCU_IDCODE_REV_ID ((uint32_t)0xFFFF0000) /*!< REV_ID[15:0] bits (Revision Identifier) */
+#define DBGMCU_IDCODE_REV_ID_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define DBGMCU_IDCODE_REV_ID_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define DBGMCU_IDCODE_REV_ID_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define DBGMCU_IDCODE_REV_ID_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+#define DBGMCU_IDCODE_REV_ID_4 ((uint32_t)0x00100000) /*!< Bit 4 */
+#define DBGMCU_IDCODE_REV_ID_5 ((uint32_t)0x00200000) /*!< Bit 5 */
+#define DBGMCU_IDCODE_REV_ID_6 ((uint32_t)0x00400000) /*!< Bit 6 */
+#define DBGMCU_IDCODE_REV_ID_7 ((uint32_t)0x00800000) /*!< Bit 7 */
+#define DBGMCU_IDCODE_REV_ID_8 ((uint32_t)0x01000000) /*!< Bit 8 */
+#define DBGMCU_IDCODE_REV_ID_9 ((uint32_t)0x02000000) /*!< Bit 9 */
+#define DBGMCU_IDCODE_REV_ID_10 ((uint32_t)0x04000000) /*!< Bit 10 */
+#define DBGMCU_IDCODE_REV_ID_11 ((uint32_t)0x08000000) /*!< Bit 11 */
+#define DBGMCU_IDCODE_REV_ID_12 ((uint32_t)0x10000000) /*!< Bit 12 */
+#define DBGMCU_IDCODE_REV_ID_13 ((uint32_t)0x20000000) /*!< Bit 13 */
+#define DBGMCU_IDCODE_REV_ID_14 ((uint32_t)0x40000000) /*!< Bit 14 */
+#define DBGMCU_IDCODE_REV_ID_15 ((uint32_t)0x80000000) /*!< Bit 15 */
+
+/****************** Bit definition for DBGMCU_CR register *******************/
+#define DBGMCU_CR_DBG_STOP ((uint32_t)0x00000002) /*!< Debug Stop Mode */
+#define DBGMCU_CR_DBG_STANDBY ((uint32_t)0x00000004) /*!< Debug Standby mode */
+
+/****************** Bit definition for DBGMCU_APB1_FZ register **************/
+#define DBGMCU_APB1_FZ_DBG_TIM2_STOP ((uint32_t)0x00000001) /*!< TIM2 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM3_STOP ((uint32_t)0x00000002) /*!< TIM3 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM6_STOP ((uint32_t)0x00000010) /*!< TIM6 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM7_STOP ((uint32_t)0x00000020) /*!< TIM7 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM14_STOP ((uint32_t)0x00000100) /*!< TIM14 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_RTC_STOP ((uint32_t)0x00000400) /*!< RTC Calendar frozen when core is halted */
+#define DBGMCU_APB1_FZ_DBG_WWDG_STOP ((uint32_t)0x00000800) /*!< Debug Window Watchdog stopped when Core is halted */
+#define DBGMCU_APB1_FZ_DBG_IWDG_STOP ((uint32_t)0x00001000) /*!< Debug Independent Watchdog stopped when Core is halted */
+#define DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00200000) /*!< I2C1 SMBUS timeout mode stopped when Core is halted */
+#define DBGMCU_APB1_FZ_DBG_CAN_STOP ((uint32_t)0x02000000) /*!< CAN debug stopped when Core is halted */
+
+/****************** Bit definition for DBGMCU_APB2_FZ register **************/
+#define DBGMCU_APB2_FZ_DBG_TIM1_STOP ((uint32_t)0x00000800) /*!< TIM1 counter stopped when core is halted */
+#define DBGMCU_APB2_FZ_DBG_TIM15_STOP ((uint32_t)0x00010000) /*!< TIM15 counter stopped when core is halted */
+#define DBGMCU_APB2_FZ_DBG_TIM16_STOP ((uint32_t)0x00020000) /*!< TIM16 counter stopped when core is halted */
+#define DBGMCU_APB2_FZ_DBG_TIM17_STOP ((uint32_t)0x00040000) /*!< TIM17 counter stopped when core is halted */
+
+/******************************************************************************/
+/* */
+/* DMA Controller (DMA) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for DMA_ISR register ********************/
+#define DMA_ISR_GIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt flag */
+#define DMA_ISR_TCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete flag */
+#define DMA_ISR_HTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer flag */
+#define DMA_ISR_TEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error flag */
+#define DMA_ISR_GIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt flag */
+#define DMA_ISR_TCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete flag */
+#define DMA_ISR_HTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer flag */
+#define DMA_ISR_TEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error flag */
+#define DMA_ISR_GIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt flag */
+#define DMA_ISR_TCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete flag */
+#define DMA_ISR_HTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer flag */
+#define DMA_ISR_TEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error flag */
+#define DMA_ISR_GIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt flag */
+#define DMA_ISR_TCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete flag */
+#define DMA_ISR_HTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer flag */
+#define DMA_ISR_TEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error flag */
+#define DMA_ISR_GIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt flag */
+#define DMA_ISR_TCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete flag */
+#define DMA_ISR_HTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer flag */
+#define DMA_ISR_TEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error flag */
+#define DMA_ISR_GIF6 ((uint32_t)0x00100000) /*!< Channel 6 Global interrupt flag */
+#define DMA_ISR_TCIF6 ((uint32_t)0x00200000) /*!< Channel 6 Transfer Complete flag */
+#define DMA_ISR_HTIF6 ((uint32_t)0x00400000) /*!< Channel 6 Half Transfer flag */
+#define DMA_ISR_TEIF6 ((uint32_t)0x00800000) /*!< Channel 6 Transfer Error flag */
+#define DMA_ISR_GIF7 ((uint32_t)0x01000000) /*!< Channel 7 Global interrupt flag */
+#define DMA_ISR_TCIF7 ((uint32_t)0x02000000) /*!< Channel 7 Transfer Complete flag */
+#define DMA_ISR_HTIF7 ((uint32_t)0x04000000) /*!< Channel 7 Half Transfer flag */
+#define DMA_ISR_TEIF7 ((uint32_t)0x08000000) /*!< Channel 7 Transfer Error flag */
+
+/******************* Bit definition for DMA_IFCR register *******************/
+#define DMA_IFCR_CGIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt clear */
+#define DMA_IFCR_CTCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete clear */
+#define DMA_IFCR_CHTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer clear */
+#define DMA_IFCR_CTEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error clear */
+#define DMA_IFCR_CGIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt clear */
+#define DMA_IFCR_CTCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete clear */
+#define DMA_IFCR_CHTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer clear */
+#define DMA_IFCR_CTEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error clear */
+#define DMA_IFCR_CGIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt clear */
+#define DMA_IFCR_CTCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete clear */
+#define DMA_IFCR_CHTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer clear */
+#define DMA_IFCR_CTEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error clear */
+#define DMA_IFCR_CGIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt clear */
+#define DMA_IFCR_CTCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete clear */
+#define DMA_IFCR_CHTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer clear */
+#define DMA_IFCR_CTEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error clear */
+#define DMA_IFCR_CGIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt clear */
+#define DMA_IFCR_CTCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete clear */
+#define DMA_IFCR_CHTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer clear */
+#define DMA_IFCR_CTEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error clear */
+#define DMA_IFCR_CGIF6 ((uint32_t)0x00100000) /*!< Channel 6 Global interrupt clear */
+#define DMA_IFCR_CTCIF6 ((uint32_t)0x00200000) /*!< Channel 6 Transfer Complete clear */
+#define DMA_IFCR_CHTIF6 ((uint32_t)0x00400000) /*!< Channel 6 Half Transfer clear */
+#define DMA_IFCR_CTEIF6 ((uint32_t)0x00800000) /*!< Channel 6 Transfer Error clear */
+#define DMA_IFCR_CGIF7 ((uint32_t)0x01000000) /*!< Channel 7 Global interrupt clear */
+#define DMA_IFCR_CTCIF7 ((uint32_t)0x02000000) /*!< Channel 7 Transfer Complete clear */
+#define DMA_IFCR_CHTIF7 ((uint32_t)0x04000000) /*!< Channel 7 Half Transfer clear */
+#define DMA_IFCR_CTEIF7 ((uint32_t)0x08000000) /*!< Channel 7 Transfer Error clear */
+
+/******************* Bit definition for DMA_CCR register ********************/
+#define DMA_CCR_EN ((uint32_t)0x00000001) /*!< Channel enable */
+#define DMA_CCR_TCIE ((uint32_t)0x00000002) /*!< Transfer complete interrupt enable */
+#define DMA_CCR_HTIE ((uint32_t)0x00000004) /*!< Half Transfer interrupt enable */
+#define DMA_CCR_TEIE ((uint32_t)0x00000008) /*!< Transfer error interrupt enable */
+#define DMA_CCR_DIR ((uint32_t)0x00000010) /*!< Data transfer direction */
+#define DMA_CCR_CIRC ((uint32_t)0x00000020) /*!< Circular mode */
+#define DMA_CCR_PINC ((uint32_t)0x00000040) /*!< Peripheral increment mode */
+#define DMA_CCR_MINC ((uint32_t)0x00000080) /*!< Memory increment mode */
+
+#define DMA_CCR_PSIZE ((uint32_t)0x00000300) /*!< PSIZE[1:0] bits (Peripheral size) */
+#define DMA_CCR_PSIZE_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define DMA_CCR_PSIZE_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+
+#define DMA_CCR_MSIZE ((uint32_t)0x00000C00) /*!< MSIZE[1:0] bits (Memory size) */
+#define DMA_CCR_MSIZE_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define DMA_CCR_MSIZE_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+
+#define DMA_CCR_PL ((uint32_t)0x00003000) /*!< PL[1:0] bits(Channel Priority level)*/
+#define DMA_CCR_PL_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define DMA_CCR_PL_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+
+#define DMA_CCR_MEM2MEM ((uint32_t)0x00004000) /*!< Memory to memory mode */
+
+/****************** Bit definition for DMA_CNDTR register *******************/
+#define DMA_CNDTR_NDT ((uint32_t)0x0000FFFF) /*!< Number of data to Transfer */
+
+/****************** Bit definition for DMA_CPAR register ********************/
+#define DMA_CPAR_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */
+
+/****************** Bit definition for DMA_CMAR register ********************/
+#define DMA_CMAR_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */
+
+/******************************************************************************/
+/* */
+/* External Interrupt/Event Controller (EXTI) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for EXTI_IMR register *******************/
+#define EXTI_IMR_MR0 ((uint32_t)0x00000001) /*!< Interrupt Mask on line 0 */
+#define EXTI_IMR_MR1 ((uint32_t)0x00000002) /*!< Interrupt Mask on line 1 */
+#define EXTI_IMR_MR2 ((uint32_t)0x00000004) /*!< Interrupt Mask on line 2 */
+#define EXTI_IMR_MR3 ((uint32_t)0x00000008) /*!< Interrupt Mask on line 3 */
+#define EXTI_IMR_MR4 ((uint32_t)0x00000010) /*!< Interrupt Mask on line 4 */
+#define EXTI_IMR_MR5 ((uint32_t)0x00000020) /*!< Interrupt Mask on line 5 */
+#define EXTI_IMR_MR6 ((uint32_t)0x00000040) /*!< Interrupt Mask on line 6 */
+#define EXTI_IMR_MR7 ((uint32_t)0x00000080) /*!< Interrupt Mask on line 7 */
+#define EXTI_IMR_MR8 ((uint32_t)0x00000100) /*!< Interrupt Mask on line 8 */
+#define EXTI_IMR_MR9 ((uint32_t)0x00000200) /*!< Interrupt Mask on line 9 */
+#define EXTI_IMR_MR10 ((uint32_t)0x00000400) /*!< Interrupt Mask on line 10 */
+#define EXTI_IMR_MR11 ((uint32_t)0x00000800) /*!< Interrupt Mask on line 11 */
+#define EXTI_IMR_MR12 ((uint32_t)0x00001000) /*!< Interrupt Mask on line 12 */
+#define EXTI_IMR_MR13 ((uint32_t)0x00002000) /*!< Interrupt Mask on line 13 */
+#define EXTI_IMR_MR14 ((uint32_t)0x00004000) /*!< Interrupt Mask on line 14 */
+#define EXTI_IMR_MR15 ((uint32_t)0x00008000) /*!< Interrupt Mask on line 15 */
+#define EXTI_IMR_MR16 ((uint32_t)0x00010000) /*!< Interrupt Mask on line 16 */
+#define EXTI_IMR_MR17 ((uint32_t)0x00020000) /*!< Interrupt Mask on line 17 */
+#define EXTI_IMR_MR19 ((uint32_t)0x00080000) /*!< Interrupt Mask on line 19 */
+#define EXTI_IMR_MR21 ((uint32_t)0x00200000) /*!< Interrupt Mask on line 21 */
+#define EXTI_IMR_MR22 ((uint32_t)0x00400000) /*!< Interrupt Mask on line 22 */
+#define EXTI_IMR_MR23 ((uint32_t)0x00800000) /*!< Interrupt Mask on line 23 */
+#define EXTI_IMR_MR25 ((uint32_t)0x02000000) /*!< Interrupt Mask on line 25 */
+#define EXTI_IMR_MR27 ((uint32_t)0x08000000) /*!< Interrupt Mask on line 27 */
+
+/****************** Bit definition for EXTI_EMR register ********************/
+#define EXTI_EMR_MR0 ((uint32_t)0x00000001) /*!< Event Mask on line 0 */
+#define EXTI_EMR_MR1 ((uint32_t)0x00000002) /*!< Event Mask on line 1 */
+#define EXTI_EMR_MR2 ((uint32_t)0x00000004) /*!< Event Mask on line 2 */
+#define EXTI_EMR_MR3 ((uint32_t)0x00000008) /*!< Event Mask on line 3 */
+#define EXTI_EMR_MR4 ((uint32_t)0x00000010) /*!< Event Mask on line 4 */
+#define EXTI_EMR_MR5 ((uint32_t)0x00000020) /*!< Event Mask on line 5 */
+#define EXTI_EMR_MR6 ((uint32_t)0x00000040) /*!< Event Mask on line 6 */
+#define EXTI_EMR_MR7 ((uint32_t)0x00000080) /*!< Event Mask on line 7 */
+#define EXTI_EMR_MR8 ((uint32_t)0x00000100) /*!< Event Mask on line 8 */
+#define EXTI_EMR_MR9 ((uint32_t)0x00000200) /*!< Event Mask on line 9 */
+#define EXTI_EMR_MR10 ((uint32_t)0x00000400) /*!< Event Mask on line 10 */
+#define EXTI_EMR_MR11 ((uint32_t)0x00000800) /*!< Event Mask on line 11 */
+#define EXTI_EMR_MR12 ((uint32_t)0x00001000) /*!< Event Mask on line 12 */
+#define EXTI_EMR_MR13 ((uint32_t)0x00002000) /*!< Event Mask on line 13 */
+#define EXTI_EMR_MR14 ((uint32_t)0x00004000) /*!< Event Mask on line 14 */
+#define EXTI_EMR_MR15 ((uint32_t)0x00008000) /*!< Event Mask on line 15 */
+#define EXTI_EMR_MR16 ((uint32_t)0x00010000) /*!< Event Mask on line 16 */
+#define EXTI_EMR_MR17 ((uint32_t)0x00020000) /*!< Event Mask on line 17 */
+#define EXTI_EMR_MR19 ((uint32_t)0x00080000) /*!< Event Mask on line 19 */
+#define EXTI_EMR_MR21 ((uint32_t)0x00200000) /*!< Event Mask on line 21 */
+#define EXTI_EMR_MR22 ((uint32_t)0x00400000) /*!< Event Mask on line 22 */
+#define EXTI_EMR_MR23 ((uint32_t)0x00800000) /*!< Event Mask on line 23 */
+#define EXTI_EMR_MR25 ((uint32_t)0x02000000) /*!< Event Mask on line 25 */
+#define EXTI_EMR_MR27 ((uint32_t)0x08000000) /*!< Event Mask on line 27 */
+
+/******************* Bit definition for EXTI_RTSR register ******************/
+#define EXTI_RTSR_TR0 ((uint32_t)0x00000001) /*!< Rising trigger event configuration bit of line 0 */
+#define EXTI_RTSR_TR1 ((uint32_t)0x00000002) /*!< Rising trigger event configuration bit of line 1 */
+#define EXTI_RTSR_TR2 ((uint32_t)0x00000004) /*!< Rising trigger event configuration bit of line 2 */
+#define EXTI_RTSR_TR3 ((uint32_t)0x00000008) /*!< Rising trigger event configuration bit of line 3 */
+#define EXTI_RTSR_TR4 ((uint32_t)0x00000010) /*!< Rising trigger event configuration bit of line 4 */
+#define EXTI_RTSR_TR5 ((uint32_t)0x00000020) /*!< Rising trigger event configuration bit of line 5 */
+#define EXTI_RTSR_TR6 ((uint32_t)0x00000040) /*!< Rising trigger event configuration bit of line 6 */
+#define EXTI_RTSR_TR7 ((uint32_t)0x00000080) /*!< Rising trigger event configuration bit of line 7 */
+#define EXTI_RTSR_TR8 ((uint32_t)0x00000100) /*!< Rising trigger event configuration bit of line 8 */
+#define EXTI_RTSR_TR9 ((uint32_t)0x00000200) /*!< Rising trigger event configuration bit of line 9 */
+#define EXTI_RTSR_TR10 ((uint32_t)0x00000400) /*!< Rising trigger event configuration bit of line 10 */
+#define EXTI_RTSR_TR11 ((uint32_t)0x00000800) /*!< Rising trigger event configuration bit of line 11 */
+#define EXTI_RTSR_TR12 ((uint32_t)0x00001000) /*!< Rising trigger event configuration bit of line 12 */
+#define EXTI_RTSR_TR13 ((uint32_t)0x00002000) /*!< Rising trigger event configuration bit of line 13 */
+#define EXTI_RTSR_TR14 ((uint32_t)0x00004000) /*!< Rising trigger event configuration bit of line 14 */
+#define EXTI_RTSR_TR15 ((uint32_t)0x00008000) /*!< Rising trigger event configuration bit of line 15 */
+#define EXTI_RTSR_TR16 ((uint32_t)0x00010000) /*!< Rising trigger event configuration bit of line 16 */
+#define EXTI_RTSR_TR17 ((uint32_t)0x00020000) /*!< Rising trigger event configuration bit of line 17 */
+#define EXTI_RTSR_TR19 ((uint32_t)0x00080000) /*!< Rising trigger event configuration bit of line 19 */
+
+/******************* Bit definition for EXTI_FTSR register *******************/
+#define EXTI_FTSR_TR0 ((uint32_t)0x00000001) /*!< Falling trigger event configuration bit of line 0 */
+#define EXTI_FTSR_TR1 ((uint32_t)0x00000002) /*!< Falling trigger event configuration bit of line 1 */
+#define EXTI_FTSR_TR2 ((uint32_t)0x00000004) /*!< Falling trigger event configuration bit of line 2 */
+#define EXTI_FTSR_TR3 ((uint32_t)0x00000008) /*!< Falling trigger event configuration bit of line 3 */
+#define EXTI_FTSR_TR4 ((uint32_t)0x00000010) /*!< Falling trigger event configuration bit of line 4 */
+#define EXTI_FTSR_TR5 ((uint32_t)0x00000020) /*!< Falling trigger event configuration bit of line 5 */
+#define EXTI_FTSR_TR6 ((uint32_t)0x00000040) /*!< Falling trigger event configuration bit of line 6 */
+#define EXTI_FTSR_TR7 ((uint32_t)0x00000080) /*!< Falling trigger event configuration bit of line 7 */
+#define EXTI_FTSR_TR8 ((uint32_t)0x00000100) /*!< Falling trigger event configuration bit of line 8 */
+#define EXTI_FTSR_TR9 ((uint32_t)0x00000200) /*!< Falling trigger event configuration bit of line 9 */
+#define EXTI_FTSR_TR10 ((uint32_t)0x00000400) /*!< Falling trigger event configuration bit of line 10 */
+#define EXTI_FTSR_TR11 ((uint32_t)0x00000800) /*!< Falling trigger event configuration bit of line 11 */
+#define EXTI_FTSR_TR12 ((uint32_t)0x00001000) /*!< Falling trigger event configuration bit of line 12 */
+#define EXTI_FTSR_TR13 ((uint32_t)0x00002000) /*!< Falling trigger event configuration bit of line 13 */
+#define EXTI_FTSR_TR14 ((uint32_t)0x00004000) /*!< Falling trigger event configuration bit of line 14 */
+#define EXTI_FTSR_TR15 ((uint32_t)0x00008000) /*!< Falling trigger event configuration bit of line 15 */
+#define EXTI_FTSR_TR16 ((uint32_t)0x00010000) /*!< Falling trigger event configuration bit of line 16 */
+#define EXTI_FTSR_TR17 ((uint32_t)0x00020000) /*!< Falling trigger event configuration bit of line 17 */
+#define EXTI_FTSR_TR19 ((uint32_t)0x00080000) /*!< Falling trigger event configuration bit of line 19 */
+
+/******************* Bit definition for EXTI_SWIER register *******************/
+#define EXTI_SWIER_SWIER0 ((uint32_t)0x00000001) /*!< Software Interrupt on line 0 */
+#define EXTI_SWIER_SWIER1 ((uint32_t)0x00000002) /*!< Software Interrupt on line 1 */
+#define EXTI_SWIER_SWIER2 ((uint32_t)0x00000004) /*!< Software Interrupt on line 2 */
+#define EXTI_SWIER_SWIER3 ((uint32_t)0x00000008) /*!< Software Interrupt on line 3 */
+#define EXTI_SWIER_SWIER4 ((uint32_t)0x00000010) /*!< Software Interrupt on line 4 */
+#define EXTI_SWIER_SWIER5 ((uint32_t)0x00000020) /*!< Software Interrupt on line 5 */
+#define EXTI_SWIER_SWIER6 ((uint32_t)0x00000040) /*!< Software Interrupt on line 6 */
+#define EXTI_SWIER_SWIER7 ((uint32_t)0x00000080) /*!< Software Interrupt on line 7 */
+#define EXTI_SWIER_SWIER8 ((uint32_t)0x00000100) /*!< Software Interrupt on line 8 */
+#define EXTI_SWIER_SWIER9 ((uint32_t)0x00000200) /*!< Software Interrupt on line 9 */
+#define EXTI_SWIER_SWIER10 ((uint32_t)0x00000400) /*!< Software Interrupt on line 10 */
+#define EXTI_SWIER_SWIER11 ((uint32_t)0x00000800) /*!< Software Interrupt on line 11 */
+#define EXTI_SWIER_SWIER12 ((uint32_t)0x00001000) /*!< Software Interrupt on line 12 */
+#define EXTI_SWIER_SWIER13 ((uint32_t)0x00002000) /*!< Software Interrupt on line 13 */
+#define EXTI_SWIER_SWIER14 ((uint32_t)0x00004000) /*!< Software Interrupt on line 14 */
+#define EXTI_SWIER_SWIER15 ((uint32_t)0x00008000) /*!< Software Interrupt on line 15 */
+#define EXTI_SWIER_SWIER16 ((uint32_t)0x00010000) /*!< Software Interrupt on line 16 */
+#define EXTI_SWIER_SWIER17 ((uint32_t)0x00020000) /*!< Software Interrupt on line 17 */
+#define EXTI_SWIER_SWIER19 ((uint32_t)0x00080000) /*!< Software Interrupt on line 19 */
+
+/****************** Bit definition for EXTI_PR register *********************/
+#define EXTI_PR_PR0 ((uint32_t)0x00000001) /*!< Pending bit 0 */
+#define EXTI_PR_PR1 ((uint32_t)0x00000002) /*!< Pending bit 1 */
+#define EXTI_PR_PR2 ((uint32_t)0x00000004) /*!< Pending bit 2 */
+#define EXTI_PR_PR3 ((uint32_t)0x00000008) /*!< Pending bit 3 */
+#define EXTI_PR_PR4 ((uint32_t)0x00000010) /*!< Pending bit 4 */
+#define EXTI_PR_PR5 ((uint32_t)0x00000020) /*!< Pending bit 5 */
+#define EXTI_PR_PR6 ((uint32_t)0x00000040) /*!< Pending bit 6 */
+#define EXTI_PR_PR7 ((uint32_t)0x00000080) /*!< Pending bit 7 */
+#define EXTI_PR_PR8 ((uint32_t)0x00000100) /*!< Pending bit 8 */
+#define EXTI_PR_PR9 ((uint32_t)0x00000200) /*!< Pending bit 9 */
+#define EXTI_PR_PR10 ((uint32_t)0x00000400) /*!< Pending bit 10 */
+#define EXTI_PR_PR11 ((uint32_t)0x00000800) /*!< Pending bit 11 */
+#define EXTI_PR_PR12 ((uint32_t)0x00001000) /*!< Pending bit 12 */
+#define EXTI_PR_PR13 ((uint32_t)0x00002000) /*!< Pending bit 13 */
+#define EXTI_PR_PR14 ((uint32_t)0x00004000) /*!< Pending bit 14 */
+#define EXTI_PR_PR15 ((uint32_t)0x00008000) /*!< Pending bit 15 */
+#define EXTI_PR_PR16 ((uint32_t)0x00010000) /*!< Pending bit 16 */
+#define EXTI_PR_PR17 ((uint32_t)0x00020000) /*!< Pending bit 17 */
+#define EXTI_PR_PR19 ((uint32_t)0x00080000) /*!< Pending bit 19 */
+
+/******************************************************************************/
+/* */
+/* FLASH and Option Bytes Registers */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for FLASH_ACR register ******************/
+#define FLASH_ACR_LATENCY ((uint32_t)0x00000001) /*!< LATENCY bit (Latency) */
+
+#define FLASH_ACR_PRFTBE ((uint32_t)0x00000010) /*!< Prefetch Buffer Enable */
+#define FLASH_ACR_PRFTBS ((uint32_t)0x00000020) /*!< Prefetch Buffer Status */
+
+/****************** Bit definition for FLASH_KEYR register ******************/
+#define FLASH_KEYR_FKEYR ((uint32_t)0xFFFFFFFF) /*!< FPEC Key */
+
+/***************** Bit definition for FLASH_OPTKEYR register ****************/
+#define FLASH_OPTKEYR_OPTKEYR ((uint32_t)0xFFFFFFFF) /*!< Option Byte Key */
+
+/****************** FLASH Keys **********************************************/
+#define FLASH_FKEY1 ((uint32_t)0x45670123) /*!< Flash program erase key1 */
+#define FLASH_FKEY2 ((uint32_t)0xCDEF89AB) /*!< Flash program erase key2: used with FLASH_PEKEY1
+ to unlock the write access to the FPEC. */
+
+#define FLASH_OPTKEY1 ((uint32_t)0x45670123) /*!< Flash option key1 */
+#define FLASH_OPTKEY2 ((uint32_t)0xCDEF89AB) /*!< Flash option key2: used with FLASH_OPTKEY1 to
+ unlock the write access to the option byte block */
+
+/****************** Bit definition for FLASH_SR register *******************/
+#define FLASH_SR_BSY ((uint32_t)0x00000001) /*!< Busy */
+#define FLASH_SR_PGERR ((uint32_t)0x00000004) /*!< Programming Error */
+#define FLASH_SR_WRPRTERR ((uint32_t)0x00000010) /*!< Write Protection Error */
+#define FLASH_SR_EOP ((uint32_t)0x00000020) /*!< End of operation */
+#define FLASH_SR_WRPERR FLASH_SR_WRPRTERR /*!< Legacy of Write Protection Error */
+
+/******************* Bit definition for FLASH_CR register *******************/
+#define FLASH_CR_PG ((uint32_t)0x00000001) /*!< Programming */
+#define FLASH_CR_PER ((uint32_t)0x00000002) /*!< Page Erase */
+#define FLASH_CR_MER ((uint32_t)0x00000004) /*!< Mass Erase */
+#define FLASH_CR_OPTPG ((uint32_t)0x00000010) /*!< Option Byte Programming */
+#define FLASH_CR_OPTER ((uint32_t)0x00000020) /*!< Option Byte Erase */
+#define FLASH_CR_STRT ((uint32_t)0x00000040) /*!< Start */
+#define FLASH_CR_LOCK ((uint32_t)0x00000080) /*!< Lock */
+#define FLASH_CR_OPTWRE ((uint32_t)0x00000200) /*!< Option Bytes Write Enable */
+#define FLASH_CR_ERRIE ((uint32_t)0x00000400) /*!< Error Interrupt Enable */
+#define FLASH_CR_EOPIE ((uint32_t)0x00001000) /*!< End of operation interrupt enable */
+#define FLASH_CR_OBL_LAUNCH ((uint32_t)0x00002000) /*!< Option Bytes Loader Launch */
+
+/******************* Bit definition for FLASH_AR register *******************/
+#define FLASH_AR_FAR ((uint32_t)0xFFFFFFFF) /*!< Flash Address */
+
+/****************** Bit definition for FLASH_OBR register *******************/
+#define FLASH_OBR_OPTERR ((uint32_t)0x00000001) /*!< Option Byte Error */
+#define FLASH_OBR_RDPRT1 ((uint32_t)0x00000002) /*!< Read protection Level 1 */
+#define FLASH_OBR_RDPRT2 ((uint32_t)0x00000004) /*!< Read protection Level 2 */
+
+#define FLASH_OBR_USER ((uint32_t)0x00003700) /*!< User Option Bytes */
+#define FLASH_OBR_IWDG_SW ((uint32_t)0x00000100) /*!< IWDG SW */
+#define FLASH_OBR_nRST_STOP ((uint32_t)0x00000200) /*!< nRST_STOP */
+#define FLASH_OBR_nRST_STDBY ((uint32_t)0x00000400) /*!< nRST_STDBY */
+#define FLASH_OBR_nBOOT1 ((uint32_t)0x00001000) /*!< nBOOT1 */
+#define FLASH_OBR_VDDA_MONITOR ((uint32_t)0x00002000) /*!< VDDA power supply supervisor */
+
+/* Old BOOT1 bit definition, maintained for legacy purpose */
+#define FLASH_OBR_BOOT1 FLASH_OBR_nBOOT1
+
+/* Old OBR_VDDA bit definition, maintained for legacy purpose */
+#define FLASH_OBR_VDDA_ANALOG FLASH_OBR_VDDA_MONITOR
+
+/****************** Bit definition for FLASH_WRPR register ******************/
+#define FLASH_WRPR_WRP ((uint32_t)0x0000FFFF) /*!< Write Protect */
+
+/*----------------------------------------------------------------------------*/
+
+/****************** Bit definition for OB_RDP register **********************/
+#define OB_RDP_RDP ((uint32_t)0x000000FF) /*!< Read protection option byte */
+#define OB_RDP_nRDP ((uint32_t)0x0000FF00) /*!< Read protection complemented option byte */
+
+/****************** Bit definition for OB_USER register *********************/
+#define OB_USER_USER ((uint32_t)0x00FF0000) /*!< User option byte */
+#define OB_USER_nUSER ((uint32_t)0xFF000000) /*!< User complemented option byte */
+
+/****************** Bit definition for OB_WRP0 register *********************/
+#define OB_WRP0_WRP0 ((uint32_t)0x000000FF) /*!< Flash memory write protection option bytes */
+#define OB_WRP0_nWRP0 ((uint32_t)0x0000FF00) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for OB_WRP1 register *********************/
+#define OB_WRP1_WRP1 ((uint32_t)0x00FF0000) /*!< Flash memory write protection option bytes */
+#define OB_WRP1_nWRP1 ((uint32_t)0xFF000000) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for OB_WRP2 register *********************/
+#define OB_WRP2_WRP2 ((uint32_t)0x000000FF) /*!< Flash memory write protection option bytes */
+#define OB_WRP2_nWRP2 ((uint32_t)0x0000FF00) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for OB_WRP3 register *********************/
+#define OB_WRP3_WRP3 ((uint32_t)0x00FF0000) /*!< Flash memory write protection option bytes */
+#define OB_WRP3_nWRP3 ((uint32_t)0xFF000000) /*!< Flash memory write protection complemented option bytes */
+
+/******************************************************************************/
+/* */
+/* General Purpose IOs (GPIO) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for GPIO_MODER register *****************/
+#define GPIO_MODER_MODER0 ((uint32_t)0x00000003)
+#define GPIO_MODER_MODER0_0 ((uint32_t)0x00000001)
+#define GPIO_MODER_MODER0_1 ((uint32_t)0x00000002)
+#define GPIO_MODER_MODER1 ((uint32_t)0x0000000C)
+#define GPIO_MODER_MODER1_0 ((uint32_t)0x00000004)
+#define GPIO_MODER_MODER1_1 ((uint32_t)0x00000008)
+#define GPIO_MODER_MODER2 ((uint32_t)0x00000030)
+#define GPIO_MODER_MODER2_0 ((uint32_t)0x00000010)
+#define GPIO_MODER_MODER2_1 ((uint32_t)0x00000020)
+#define GPIO_MODER_MODER3 ((uint32_t)0x000000C0)
+#define GPIO_MODER_MODER3_0 ((uint32_t)0x00000040)
+#define GPIO_MODER_MODER3_1 ((uint32_t)0x00000080)
+#define GPIO_MODER_MODER4 ((uint32_t)0x00000300)
+#define GPIO_MODER_MODER4_0 ((uint32_t)0x00000100)
+#define GPIO_MODER_MODER4_1 ((uint32_t)0x00000200)
+#define GPIO_MODER_MODER5 ((uint32_t)0x00000C00)
+#define GPIO_MODER_MODER5_0 ((uint32_t)0x00000400)
+#define GPIO_MODER_MODER5_1 ((uint32_t)0x00000800)
+#define GPIO_MODER_MODER6 ((uint32_t)0x00003000)
+#define GPIO_MODER_MODER6_0 ((uint32_t)0x00001000)
+#define GPIO_MODER_MODER6_1 ((uint32_t)0x00002000)
+#define GPIO_MODER_MODER7 ((uint32_t)0x0000C000)
+#define GPIO_MODER_MODER7_0 ((uint32_t)0x00004000)
+#define GPIO_MODER_MODER7_1 ((uint32_t)0x00008000)
+#define GPIO_MODER_MODER8 ((uint32_t)0x00030000)
+#define GPIO_MODER_MODER8_0 ((uint32_t)0x00010000)
+#define GPIO_MODER_MODER8_1 ((uint32_t)0x00020000)
+#define GPIO_MODER_MODER9 ((uint32_t)0x000C0000)
+#define GPIO_MODER_MODER9_0 ((uint32_t)0x00040000)
+#define GPIO_MODER_MODER9_1 ((uint32_t)0x00080000)
+#define GPIO_MODER_MODER10 ((uint32_t)0x00300000)
+#define GPIO_MODER_MODER10_0 ((uint32_t)0x00100000)
+#define GPIO_MODER_MODER10_1 ((uint32_t)0x00200000)
+#define GPIO_MODER_MODER11 ((uint32_t)0x00C00000)
+#define GPIO_MODER_MODER11_0 ((uint32_t)0x00400000)
+#define GPIO_MODER_MODER11_1 ((uint32_t)0x00800000)
+#define GPIO_MODER_MODER12 ((uint32_t)0x03000000)
+#define GPIO_MODER_MODER12_0 ((uint32_t)0x01000000)
+#define GPIO_MODER_MODER12_1 ((uint32_t)0x02000000)
+#define GPIO_MODER_MODER13 ((uint32_t)0x0C000000)
+#define GPIO_MODER_MODER13_0 ((uint32_t)0x04000000)
+#define GPIO_MODER_MODER13_1 ((uint32_t)0x08000000)
+#define GPIO_MODER_MODER14 ((uint32_t)0x30000000)
+#define GPIO_MODER_MODER14_0 ((uint32_t)0x10000000)
+#define GPIO_MODER_MODER14_1 ((uint32_t)0x20000000)
+#define GPIO_MODER_MODER15 ((uint32_t)0xC0000000)
+#define GPIO_MODER_MODER15_0 ((uint32_t)0x40000000)
+#define GPIO_MODER_MODER15_1 ((uint32_t)0x80000000)
+
+/****************** Bit definition for GPIO_OTYPER register *****************/
+#define GPIO_OTYPER_OT_0 ((uint32_t)0x00000001)
+#define GPIO_OTYPER_OT_1 ((uint32_t)0x00000002)
+#define GPIO_OTYPER_OT_2 ((uint32_t)0x00000004)
+#define GPIO_OTYPER_OT_3 ((uint32_t)0x00000008)
+#define GPIO_OTYPER_OT_4 ((uint32_t)0x00000010)
+#define GPIO_OTYPER_OT_5 ((uint32_t)0x00000020)
+#define GPIO_OTYPER_OT_6 ((uint32_t)0x00000040)
+#define GPIO_OTYPER_OT_7 ((uint32_t)0x00000080)
+#define GPIO_OTYPER_OT_8 ((uint32_t)0x00000100)
+#define GPIO_OTYPER_OT_9 ((uint32_t)0x00000200)
+#define GPIO_OTYPER_OT_10 ((uint32_t)0x00000400)
+#define GPIO_OTYPER_OT_11 ((uint32_t)0x00000800)
+#define GPIO_OTYPER_OT_12 ((uint32_t)0x00001000)
+#define GPIO_OTYPER_OT_13 ((uint32_t)0x00002000)
+#define GPIO_OTYPER_OT_14 ((uint32_t)0x00004000)
+#define GPIO_OTYPER_OT_15 ((uint32_t)0x00008000)
+
+/**************** Bit definition for GPIO_OSPEEDR register ******************/
+#define GPIO_OSPEEDR_OSPEEDR0 ((uint32_t)0x00000003)
+#define GPIO_OSPEEDR_OSPEEDR0_0 ((uint32_t)0x00000001)
+#define GPIO_OSPEEDR_OSPEEDR0_1 ((uint32_t)0x00000002)
+#define GPIO_OSPEEDR_OSPEEDR1 ((uint32_t)0x0000000C)
+#define GPIO_OSPEEDR_OSPEEDR1_0 ((uint32_t)0x00000004)
+#define GPIO_OSPEEDR_OSPEEDR1_1 ((uint32_t)0x00000008)
+#define GPIO_OSPEEDR_OSPEEDR2 ((uint32_t)0x00000030)
+#define GPIO_OSPEEDR_OSPEEDR2_0 ((uint32_t)0x00000010)
+#define GPIO_OSPEEDR_OSPEEDR2_1 ((uint32_t)0x00000020)
+#define GPIO_OSPEEDR_OSPEEDR3 ((uint32_t)0x000000C0)
+#define GPIO_OSPEEDR_OSPEEDR3_0 ((uint32_t)0x00000040)
+#define GPIO_OSPEEDR_OSPEEDR3_1 ((uint32_t)0x00000080)
+#define GPIO_OSPEEDR_OSPEEDR4 ((uint32_t)0x00000300)
+#define GPIO_OSPEEDR_OSPEEDR4_0 ((uint32_t)0x00000100)
+#define GPIO_OSPEEDR_OSPEEDR4_1 ((uint32_t)0x00000200)
+#define GPIO_OSPEEDR_OSPEEDR5 ((uint32_t)0x00000C00)
+#define GPIO_OSPEEDR_OSPEEDR5_0 ((uint32_t)0x00000400)
+#define GPIO_OSPEEDR_OSPEEDR5_1 ((uint32_t)0x00000800)
+#define GPIO_OSPEEDR_OSPEEDR6 ((uint32_t)0x00003000)
+#define GPIO_OSPEEDR_OSPEEDR6_0 ((uint32_t)0x00001000)
+#define GPIO_OSPEEDR_OSPEEDR6_1 ((uint32_t)0x00002000)
+#define GPIO_OSPEEDR_OSPEEDR7 ((uint32_t)0x0000C000)
+#define GPIO_OSPEEDR_OSPEEDR7_0 ((uint32_t)0x00004000)
+#define GPIO_OSPEEDR_OSPEEDR7_1 ((uint32_t)0x00008000)
+#define GPIO_OSPEEDR_OSPEEDR8 ((uint32_t)0x00030000)
+#define GPIO_OSPEEDR_OSPEEDR8_0 ((uint32_t)0x00010000)
+#define GPIO_OSPEEDR_OSPEEDR8_1 ((uint32_t)0x00020000)
+#define GPIO_OSPEEDR_OSPEEDR9 ((uint32_t)0x000C0000)
+#define GPIO_OSPEEDR_OSPEEDR9_0 ((uint32_t)0x00040000)
+#define GPIO_OSPEEDR_OSPEEDR9_1 ((uint32_t)0x00080000)
+#define GPIO_OSPEEDR_OSPEEDR10 ((uint32_t)0x00300000)
+#define GPIO_OSPEEDR_OSPEEDR10_0 ((uint32_t)0x00100000)
+#define GPIO_OSPEEDR_OSPEEDR10_1 ((uint32_t)0x00200000)
+#define GPIO_OSPEEDR_OSPEEDR11 ((uint32_t)0x00C00000)
+#define GPIO_OSPEEDR_OSPEEDR11_0 ((uint32_t)0x00400000)
+#define GPIO_OSPEEDR_OSPEEDR11_1 ((uint32_t)0x00800000)
+#define GPIO_OSPEEDR_OSPEEDR12 ((uint32_t)0x03000000)
+#define GPIO_OSPEEDR_OSPEEDR12_0 ((uint32_t)0x01000000)
+#define GPIO_OSPEEDR_OSPEEDR12_1 ((uint32_t)0x02000000)
+#define GPIO_OSPEEDR_OSPEEDR13 ((uint32_t)0x0C000000)
+#define GPIO_OSPEEDR_OSPEEDR13_0 ((uint32_t)0x04000000)
+#define GPIO_OSPEEDR_OSPEEDR13_1 ((uint32_t)0x08000000)
+#define GPIO_OSPEEDR_OSPEEDR14 ((uint32_t)0x30000000)
+#define GPIO_OSPEEDR_OSPEEDR14_0 ((uint32_t)0x10000000)
+#define GPIO_OSPEEDR_OSPEEDR14_1 ((uint32_t)0x20000000)
+#define GPIO_OSPEEDR_OSPEEDR15 ((uint32_t)0xC0000000)
+#define GPIO_OSPEEDR_OSPEEDR15_0 ((uint32_t)0x40000000)
+#define GPIO_OSPEEDR_OSPEEDR15_1 ((uint32_t)0x80000000)
+
+/* Old Bit definition for GPIO_OSPEEDR register maintained for legacy purpose */
+#define GPIO_OSPEEDER_OSPEEDR0 GPIO_OSPEEDR_OSPEEDR0
+#define GPIO_OSPEEDER_OSPEEDR0_0 GPIO_OSPEEDR_OSPEEDR0_0
+#define GPIO_OSPEEDER_OSPEEDR0_1 GPIO_OSPEEDR_OSPEEDR0_1
+#define GPIO_OSPEEDER_OSPEEDR1 GPIO_OSPEEDR_OSPEEDR1
+#define GPIO_OSPEEDER_OSPEEDR1_0 GPIO_OSPEEDR_OSPEEDR1_0
+#define GPIO_OSPEEDER_OSPEEDR1_1 GPIO_OSPEEDR_OSPEEDR1_1
+#define GPIO_OSPEEDER_OSPEEDR2 GPIO_OSPEEDR_OSPEEDR2
+#define GPIO_OSPEEDER_OSPEEDR2_0 GPIO_OSPEEDR_OSPEEDR2_0
+#define GPIO_OSPEEDER_OSPEEDR2_1 GPIO_OSPEEDR_OSPEEDR2_1
+#define GPIO_OSPEEDER_OSPEEDR3 GPIO_OSPEEDR_OSPEEDR3
+#define GPIO_OSPEEDER_OSPEEDR3_0 GPIO_OSPEEDR_OSPEEDR3_0
+#define GPIO_OSPEEDER_OSPEEDR3_1 GPIO_OSPEEDR_OSPEEDR3_1
+#define GPIO_OSPEEDER_OSPEEDR4 GPIO_OSPEEDR_OSPEEDR4
+#define GPIO_OSPEEDER_OSPEEDR4_0 GPIO_OSPEEDR_OSPEEDR4_0
+#define GPIO_OSPEEDER_OSPEEDR4_1 GPIO_OSPEEDR_OSPEEDR4_1
+#define GPIO_OSPEEDER_OSPEEDR5 GPIO_OSPEEDR_OSPEEDR5
+#define GPIO_OSPEEDER_OSPEEDR5_0 GPIO_OSPEEDR_OSPEEDR5_0
+#define GPIO_OSPEEDER_OSPEEDR5_1 GPIO_OSPEEDR_OSPEEDR5_1
+#define GPIO_OSPEEDER_OSPEEDR6 GPIO_OSPEEDR_OSPEEDR6
+#define GPIO_OSPEEDER_OSPEEDR6_0 GPIO_OSPEEDR_OSPEEDR6_0
+#define GPIO_OSPEEDER_OSPEEDR6_1 GPIO_OSPEEDR_OSPEEDR6_1
+#define GPIO_OSPEEDER_OSPEEDR7 GPIO_OSPEEDR_OSPEEDR7
+#define GPIO_OSPEEDER_OSPEEDR7_0 GPIO_OSPEEDR_OSPEEDR7_0
+#define GPIO_OSPEEDER_OSPEEDR7_1 GPIO_OSPEEDR_OSPEEDR7_1
+#define GPIO_OSPEEDER_OSPEEDR8 GPIO_OSPEEDR_OSPEEDR8
+#define GPIO_OSPEEDER_OSPEEDR8_0 GPIO_OSPEEDR_OSPEEDR8_0
+#define GPIO_OSPEEDER_OSPEEDR8_1 GPIO_OSPEEDR_OSPEEDR8_1
+#define GPIO_OSPEEDER_OSPEEDR9 GPIO_OSPEEDR_OSPEEDR9
+#define GPIO_OSPEEDER_OSPEEDR9_0 GPIO_OSPEEDR_OSPEEDR9_0
+#define GPIO_OSPEEDER_OSPEEDR9_1 GPIO_OSPEEDR_OSPEEDR9_1
+#define GPIO_OSPEEDER_OSPEEDR10 GPIO_OSPEEDR_OSPEEDR10
+#define GPIO_OSPEEDER_OSPEEDR10_0 GPIO_OSPEEDR_OSPEEDR10_0
+#define GPIO_OSPEEDER_OSPEEDR10_1 GPIO_OSPEEDR_OSPEEDR10_1
+#define GPIO_OSPEEDER_OSPEEDR11 GPIO_OSPEEDR_OSPEEDR11
+#define GPIO_OSPEEDER_OSPEEDR11_0 GPIO_OSPEEDR_OSPEEDR11_0
+#define GPIO_OSPEEDER_OSPEEDR11_1 GPIO_OSPEEDR_OSPEEDR11_1
+#define GPIO_OSPEEDER_OSPEEDR12 GPIO_OSPEEDR_OSPEEDR12
+#define GPIO_OSPEEDER_OSPEEDR12_0 GPIO_OSPEEDR_OSPEEDR12_0
+#define GPIO_OSPEEDER_OSPEEDR12_1 GPIO_OSPEEDR_OSPEEDR12_1
+#define GPIO_OSPEEDER_OSPEEDR13 GPIO_OSPEEDR_OSPEEDR13
+#define GPIO_OSPEEDER_OSPEEDR13_0 GPIO_OSPEEDR_OSPEEDR13_0
+#define GPIO_OSPEEDER_OSPEEDR13_1 GPIO_OSPEEDR_OSPEEDR13_1
+#define GPIO_OSPEEDER_OSPEEDR14 GPIO_OSPEEDR_OSPEEDR14
+#define GPIO_OSPEEDER_OSPEEDR14_0 GPIO_OSPEEDR_OSPEEDR14_0
+#define GPIO_OSPEEDER_OSPEEDR14_1 GPIO_OSPEEDR_OSPEEDR14_1
+#define GPIO_OSPEEDER_OSPEEDR15 GPIO_OSPEEDR_OSPEEDR15
+#define GPIO_OSPEEDER_OSPEEDR15_0 GPIO_OSPEEDR_OSPEEDR15_0
+#define GPIO_OSPEEDER_OSPEEDR15_1 GPIO_OSPEEDR_OSPEEDR15_1
+
+/******************* Bit definition for GPIO_PUPDR register ******************/
+#define GPIO_PUPDR_PUPDR0 ((uint32_t)0x00000003)
+#define GPIO_PUPDR_PUPDR0_0 ((uint32_t)0x00000001)
+#define GPIO_PUPDR_PUPDR0_1 ((uint32_t)0x00000002)
+#define GPIO_PUPDR_PUPDR1 ((uint32_t)0x0000000C)
+#define GPIO_PUPDR_PUPDR1_0 ((uint32_t)0x00000004)
+#define GPIO_PUPDR_PUPDR1_1 ((uint32_t)0x00000008)
+#define GPIO_PUPDR_PUPDR2 ((uint32_t)0x00000030)
+#define GPIO_PUPDR_PUPDR2_0 ((uint32_t)0x00000010)
+#define GPIO_PUPDR_PUPDR2_1 ((uint32_t)0x00000020)
+#define GPIO_PUPDR_PUPDR3 ((uint32_t)0x000000C0)
+#define GPIO_PUPDR_PUPDR3_0 ((uint32_t)0x00000040)
+#define GPIO_PUPDR_PUPDR3_1 ((uint32_t)0x00000080)
+#define GPIO_PUPDR_PUPDR4 ((uint32_t)0x00000300)
+#define GPIO_PUPDR_PUPDR4_0 ((uint32_t)0x00000100)
+#define GPIO_PUPDR_PUPDR4_1 ((uint32_t)0x00000200)
+#define GPIO_PUPDR_PUPDR5 ((uint32_t)0x00000C00)
+#define GPIO_PUPDR_PUPDR5_0 ((uint32_t)0x00000400)
+#define GPIO_PUPDR_PUPDR5_1 ((uint32_t)0x00000800)
+#define GPIO_PUPDR_PUPDR6 ((uint32_t)0x00003000)
+#define GPIO_PUPDR_PUPDR6_0 ((uint32_t)0x00001000)
+#define GPIO_PUPDR_PUPDR6_1 ((uint32_t)0x00002000)
+#define GPIO_PUPDR_PUPDR7 ((uint32_t)0x0000C000)
+#define GPIO_PUPDR_PUPDR7_0 ((uint32_t)0x00004000)
+#define GPIO_PUPDR_PUPDR7_1 ((uint32_t)0x00008000)
+#define GPIO_PUPDR_PUPDR8 ((uint32_t)0x00030000)
+#define GPIO_PUPDR_PUPDR8_0 ((uint32_t)0x00010000)
+#define GPIO_PUPDR_PUPDR8_1 ((uint32_t)0x00020000)
+#define GPIO_PUPDR_PUPDR9 ((uint32_t)0x000C0000)
+#define GPIO_PUPDR_PUPDR9_0 ((uint32_t)0x00040000)
+#define GPIO_PUPDR_PUPDR9_1 ((uint32_t)0x00080000)
+#define GPIO_PUPDR_PUPDR10 ((uint32_t)0x00300000)
+#define GPIO_PUPDR_PUPDR10_0 ((uint32_t)0x00100000)
+#define GPIO_PUPDR_PUPDR10_1 ((uint32_t)0x00200000)
+#define GPIO_PUPDR_PUPDR11 ((uint32_t)0x00C00000)
+#define GPIO_PUPDR_PUPDR11_0 ((uint32_t)0x00400000)
+#define GPIO_PUPDR_PUPDR11_1 ((uint32_t)0x00800000)
+#define GPIO_PUPDR_PUPDR12 ((uint32_t)0x03000000)
+#define GPIO_PUPDR_PUPDR12_0 ((uint32_t)0x01000000)
+#define GPIO_PUPDR_PUPDR12_1 ((uint32_t)0x02000000)
+#define GPIO_PUPDR_PUPDR13 ((uint32_t)0x0C000000)
+#define GPIO_PUPDR_PUPDR13_0 ((uint32_t)0x04000000)
+#define GPIO_PUPDR_PUPDR13_1 ((uint32_t)0x08000000)
+#define GPIO_PUPDR_PUPDR14 ((uint32_t)0x30000000)
+#define GPIO_PUPDR_PUPDR14_0 ((uint32_t)0x10000000)
+#define GPIO_PUPDR_PUPDR14_1 ((uint32_t)0x20000000)
+#define GPIO_PUPDR_PUPDR15 ((uint32_t)0xC0000000)
+#define GPIO_PUPDR_PUPDR15_0 ((uint32_t)0x40000000)
+#define GPIO_PUPDR_PUPDR15_1 ((uint32_t)0x80000000)
+
+/******************* Bit definition for GPIO_IDR register *******************/
+#define GPIO_IDR_0 ((uint32_t)0x00000001)
+#define GPIO_IDR_1 ((uint32_t)0x00000002)
+#define GPIO_IDR_2 ((uint32_t)0x00000004)
+#define GPIO_IDR_3 ((uint32_t)0x00000008)
+#define GPIO_IDR_4 ((uint32_t)0x00000010)
+#define GPIO_IDR_5 ((uint32_t)0x00000020)
+#define GPIO_IDR_6 ((uint32_t)0x00000040)
+#define GPIO_IDR_7 ((uint32_t)0x00000080)
+#define GPIO_IDR_8 ((uint32_t)0x00000100)
+#define GPIO_IDR_9 ((uint32_t)0x00000200)
+#define GPIO_IDR_10 ((uint32_t)0x00000400)
+#define GPIO_IDR_11 ((uint32_t)0x00000800)
+#define GPIO_IDR_12 ((uint32_t)0x00001000)
+#define GPIO_IDR_13 ((uint32_t)0x00002000)
+#define GPIO_IDR_14 ((uint32_t)0x00004000)
+#define GPIO_IDR_15 ((uint32_t)0x00008000)
+
+/****************** Bit definition for GPIO_ODR register ********************/
+#define GPIO_ODR_0 ((uint32_t)0x00000001)
+#define GPIO_ODR_1 ((uint32_t)0x00000002)
+#define GPIO_ODR_2 ((uint32_t)0x00000004)
+#define GPIO_ODR_3 ((uint32_t)0x00000008)
+#define GPIO_ODR_4 ((uint32_t)0x00000010)
+#define GPIO_ODR_5 ((uint32_t)0x00000020)
+#define GPIO_ODR_6 ((uint32_t)0x00000040)
+#define GPIO_ODR_7 ((uint32_t)0x00000080)
+#define GPIO_ODR_8 ((uint32_t)0x00000100)
+#define GPIO_ODR_9 ((uint32_t)0x00000200)
+#define GPIO_ODR_10 ((uint32_t)0x00000400)
+#define GPIO_ODR_11 ((uint32_t)0x00000800)
+#define GPIO_ODR_12 ((uint32_t)0x00001000)
+#define GPIO_ODR_13 ((uint32_t)0x00002000)
+#define GPIO_ODR_14 ((uint32_t)0x00004000)
+#define GPIO_ODR_15 ((uint32_t)0x00008000)
+
+/****************** Bit definition for GPIO_BSRR register ********************/
+#define GPIO_BSRR_BS_0 ((uint32_t)0x00000001)
+#define GPIO_BSRR_BS_1 ((uint32_t)0x00000002)
+#define GPIO_BSRR_BS_2 ((uint32_t)0x00000004)
+#define GPIO_BSRR_BS_3 ((uint32_t)0x00000008)
+#define GPIO_BSRR_BS_4 ((uint32_t)0x00000010)
+#define GPIO_BSRR_BS_5 ((uint32_t)0x00000020)
+#define GPIO_BSRR_BS_6 ((uint32_t)0x00000040)
+#define GPIO_BSRR_BS_7 ((uint32_t)0x00000080)
+#define GPIO_BSRR_BS_8 ((uint32_t)0x00000100)
+#define GPIO_BSRR_BS_9 ((uint32_t)0x00000200)
+#define GPIO_BSRR_BS_10 ((uint32_t)0x00000400)
+#define GPIO_BSRR_BS_11 ((uint32_t)0x00000800)
+#define GPIO_BSRR_BS_12 ((uint32_t)0x00001000)
+#define GPIO_BSRR_BS_13 ((uint32_t)0x00002000)
+#define GPIO_BSRR_BS_14 ((uint32_t)0x00004000)
+#define GPIO_BSRR_BS_15 ((uint32_t)0x00008000)
+#define GPIO_BSRR_BR_0 ((uint32_t)0x00010000)
+#define GPIO_BSRR_BR_1 ((uint32_t)0x00020000)
+#define GPIO_BSRR_BR_2 ((uint32_t)0x00040000)
+#define GPIO_BSRR_BR_3 ((uint32_t)0x00080000)
+#define GPIO_BSRR_BR_4 ((uint32_t)0x00100000)
+#define GPIO_BSRR_BR_5 ((uint32_t)0x00200000)
+#define GPIO_BSRR_BR_6 ((uint32_t)0x00400000)
+#define GPIO_BSRR_BR_7 ((uint32_t)0x00800000)
+#define GPIO_BSRR_BR_8 ((uint32_t)0x01000000)
+#define GPIO_BSRR_BR_9 ((uint32_t)0x02000000)
+#define GPIO_BSRR_BR_10 ((uint32_t)0x04000000)
+#define GPIO_BSRR_BR_11 ((uint32_t)0x08000000)
+#define GPIO_BSRR_BR_12 ((uint32_t)0x10000000)
+#define GPIO_BSRR_BR_13 ((uint32_t)0x20000000)
+#define GPIO_BSRR_BR_14 ((uint32_t)0x40000000)
+#define GPIO_BSRR_BR_15 ((uint32_t)0x80000000)
+
+/****************** Bit definition for GPIO_LCKR register ********************/
+#define GPIO_LCKR_LCK0 ((uint32_t)0x00000001)
+#define GPIO_LCKR_LCK1 ((uint32_t)0x00000002)
+#define GPIO_LCKR_LCK2 ((uint32_t)0x00000004)
+#define GPIO_LCKR_LCK3 ((uint32_t)0x00000008)
+#define GPIO_LCKR_LCK4 ((uint32_t)0x00000010)
+#define GPIO_LCKR_LCK5 ((uint32_t)0x00000020)
+#define GPIO_LCKR_LCK6 ((uint32_t)0x00000040)
+#define GPIO_LCKR_LCK7 ((uint32_t)0x00000080)
+#define GPIO_LCKR_LCK8 ((uint32_t)0x00000100)
+#define GPIO_LCKR_LCK9 ((uint32_t)0x00000200)
+#define GPIO_LCKR_LCK10 ((uint32_t)0x00000400)
+#define GPIO_LCKR_LCK11 ((uint32_t)0x00000800)
+#define GPIO_LCKR_LCK12 ((uint32_t)0x00001000)
+#define GPIO_LCKR_LCK13 ((uint32_t)0x00002000)
+#define GPIO_LCKR_LCK14 ((uint32_t)0x00004000)
+#define GPIO_LCKR_LCK15 ((uint32_t)0x00008000)
+#define GPIO_LCKR_LCKK ((uint32_t)0x00010000)
+
+/****************** Bit definition for GPIO_AFRL register ********************/
+#define GPIO_AFRL_AFRL0 ((uint32_t)0x0000000F)
+#define GPIO_AFRL_AFRL1 ((uint32_t)0x000000F0)
+#define GPIO_AFRL_AFRL2 ((uint32_t)0x00000F00)
+#define GPIO_AFRL_AFRL3 ((uint32_t)0x0000F000)
+#define GPIO_AFRL_AFRL4 ((uint32_t)0x000F0000)
+#define GPIO_AFRL_AFRL5 ((uint32_t)0x00F00000)
+#define GPIO_AFRL_AFRL6 ((uint32_t)0x0F000000)
+#define GPIO_AFRL_AFRL7 ((uint32_t)0xF0000000)
+
+/****************** Bit definition for GPIO_AFRH register ********************/
+#define GPIO_AFRH_AFRH0 ((uint32_t)0x0000000F)
+#define GPIO_AFRH_AFRH1 ((uint32_t)0x000000F0)
+#define GPIO_AFRH_AFRH2 ((uint32_t)0x00000F00)
+#define GPIO_AFRH_AFRH3 ((uint32_t)0x0000F000)
+#define GPIO_AFRH_AFRH4 ((uint32_t)0x000F0000)
+#define GPIO_AFRH_AFRH5 ((uint32_t)0x00F00000)
+#define GPIO_AFRH_AFRH6 ((uint32_t)0x0F000000)
+#define GPIO_AFRH_AFRH7 ((uint32_t)0xF0000000)
+
+/****************** Bit definition for GPIO_BRR register *********************/
+#define GPIO_BRR_BR_0 ((uint32_t)0x00000001)
+#define GPIO_BRR_BR_1 ((uint32_t)0x00000002)
+#define GPIO_BRR_BR_2 ((uint32_t)0x00000004)
+#define GPIO_BRR_BR_3 ((uint32_t)0x00000008)
+#define GPIO_BRR_BR_4 ((uint32_t)0x00000010)
+#define GPIO_BRR_BR_5 ((uint32_t)0x00000020)
+#define GPIO_BRR_BR_6 ((uint32_t)0x00000040)
+#define GPIO_BRR_BR_7 ((uint32_t)0x00000080)
+#define GPIO_BRR_BR_8 ((uint32_t)0x00000100)
+#define GPIO_BRR_BR_9 ((uint32_t)0x00000200)
+#define GPIO_BRR_BR_10 ((uint32_t)0x00000400)
+#define GPIO_BRR_BR_11 ((uint32_t)0x00000800)
+#define GPIO_BRR_BR_12 ((uint32_t)0x00001000)
+#define GPIO_BRR_BR_13 ((uint32_t)0x00002000)
+#define GPIO_BRR_BR_14 ((uint32_t)0x00004000)
+#define GPIO_BRR_BR_15 ((uint32_t)0x00008000)
+
+/******************************************************************************/
+/* */
+/* Inter-integrated Circuit Interface (I2C) */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for I2C_CR1 register *******************/
+#define I2C_CR1_PE ((uint32_t)0x00000001) /*!< Peripheral enable */
+#define I2C_CR1_TXIE ((uint32_t)0x00000002) /*!< TX interrupt enable */
+#define I2C_CR1_RXIE ((uint32_t)0x00000004) /*!< RX interrupt enable */
+#define I2C_CR1_ADDRIE ((uint32_t)0x00000008) /*!< Address match interrupt enable */
+#define I2C_CR1_NACKIE ((uint32_t)0x00000010) /*!< NACK received interrupt enable */
+#define I2C_CR1_STOPIE ((uint32_t)0x00000020) /*!< STOP detection interrupt enable */
+#define I2C_CR1_TCIE ((uint32_t)0x00000040) /*!< Transfer complete interrupt enable */
+#define I2C_CR1_ERRIE ((uint32_t)0x00000080) /*!< Errors interrupt enable */
+#define I2C_CR1_DFN ((uint32_t)0x00000F00) /*!< Digital noise filter */
+#define I2C_CR1_ANFOFF ((uint32_t)0x00001000) /*!< Analog noise filter OFF */
+#define I2C_CR1_SWRST ((uint32_t)0x00002000) /*!< Software reset */
+#define I2C_CR1_TXDMAEN ((uint32_t)0x00004000) /*!< DMA transmission requests enable */
+#define I2C_CR1_RXDMAEN ((uint32_t)0x00008000) /*!< DMA reception requests enable */
+#define I2C_CR1_SBC ((uint32_t)0x00010000) /*!< Slave byte control */
+#define I2C_CR1_NOSTRETCH ((uint32_t)0x00020000) /*!< Clock stretching disable */
+#define I2C_CR1_WUPEN ((uint32_t)0x00040000) /*!< Wakeup from STOP enable */
+#define I2C_CR1_GCEN ((uint32_t)0x00080000) /*!< General call enable */
+#define I2C_CR1_SMBHEN ((uint32_t)0x00100000) /*!< SMBus host address enable */
+#define I2C_CR1_SMBDEN ((uint32_t)0x00200000) /*!< SMBus device default address enable */
+#define I2C_CR1_ALERTEN ((uint32_t)0x00400000) /*!< SMBus alert enable */
+#define I2C_CR1_PECEN ((uint32_t)0x00800000) /*!< PEC enable */
+
+/****************** Bit definition for I2C_CR2 register ********************/
+#define I2C_CR2_SADD ((uint32_t)0x000003FF) /*!< Slave address (master mode) */
+#define I2C_CR2_RD_WRN ((uint32_t)0x00000400) /*!< Transfer direction (master mode) */
+#define I2C_CR2_ADD10 ((uint32_t)0x00000800) /*!< 10-bit addressing mode (master mode) */
+#define I2C_CR2_HEAD10R ((uint32_t)0x00001000) /*!< 10-bit address header only read direction (master mode) */
+#define I2C_CR2_START ((uint32_t)0x00002000) /*!< START generation */
+#define I2C_CR2_STOP ((uint32_t)0x00004000) /*!< STOP generation (master mode) */
+#define I2C_CR2_NACK ((uint32_t)0x00008000) /*!< NACK generation (slave mode) */
+#define I2C_CR2_NBYTES ((uint32_t)0x00FF0000) /*!< Number of bytes */
+#define I2C_CR2_RELOAD ((uint32_t)0x01000000) /*!< NBYTES reload mode */
+#define I2C_CR2_AUTOEND ((uint32_t)0x02000000) /*!< Automatic end mode (master mode) */
+#define I2C_CR2_PECBYTE ((uint32_t)0x04000000) /*!< Packet error checking byte */
+
+/******************* Bit definition for I2C_OAR1 register ******************/
+#define I2C_OAR1_OA1 ((uint32_t)0x000003FF) /*!< Interface own address 1 */
+#define I2C_OAR1_OA1MODE ((uint32_t)0x00000400) /*!< Own address 1 10-bit mode */
+#define I2C_OAR1_OA1EN ((uint32_t)0x00008000) /*!< Own address 1 enable */
+
+/******************* Bit definition for I2C_OAR2 register ******************/
+#define I2C_OAR2_OA2 ((uint32_t)0x000000FE) /*!< Interface own address 2 */
+#define I2C_OAR2_OA2MSK ((uint32_t)0x00000700) /*!< Own address 2 masks */
+#define I2C_OAR2_OA2EN ((uint32_t)0x00008000) /*!< Own address 2 enable */
+
+/******************* Bit definition for I2C_TIMINGR register ****************/
+#define I2C_TIMINGR_SCLL ((uint32_t)0x000000FF) /*!< SCL low period (master mode) */
+#define I2C_TIMINGR_SCLH ((uint32_t)0x0000FF00) /*!< SCL high period (master mode) */
+#define I2C_TIMINGR_SDADEL ((uint32_t)0x000F0000) /*!< Data hold time */
+#define I2C_TIMINGR_SCLDEL ((uint32_t)0x00F00000) /*!< Data setup time */
+#define I2C_TIMINGR_PRESC ((uint32_t)0xF0000000) /*!< Timings prescaler */
+
+/******************* Bit definition for I2C_TIMEOUTR register ****************/
+#define I2C_TIMEOUTR_TIMEOUTA ((uint32_t)0x00000FFF) /*!< Bus timeout A */
+#define I2C_TIMEOUTR_TIDLE ((uint32_t)0x00001000) /*!< Idle clock timeout detection */
+#define I2C_TIMEOUTR_TIMOUTEN ((uint32_t)0x00008000) /*!< Clock timeout enable */
+#define I2C_TIMEOUTR_TIMEOUTB ((uint32_t)0x0FFF0000) /*!< Bus timeout B*/
+#define I2C_TIMEOUTR_TEXTEN ((uint32_t)0x80000000) /*!< Extended clock timeout enable */
+
+/****************** Bit definition for I2C_ISR register ********************/
+#define I2C_ISR_TXE ((uint32_t)0x00000001) /*!< Transmit data register empty */
+#define I2C_ISR_TXIS ((uint32_t)0x00000002) /*!< Transmit interrupt status */
+#define I2C_ISR_RXNE ((uint32_t)0x00000004) /*!< Receive data register not empty */
+#define I2C_ISR_ADDR ((uint32_t)0x00000008) /*!< Address matched (slave mode)*/
+#define I2C_ISR_NACKF ((uint32_t)0x00000010) /*!< NACK received flag */
+#define I2C_ISR_STOPF ((uint32_t)0x00000020) /*!< STOP detection flag */
+#define I2C_ISR_TC ((uint32_t)0x00000040) /*!< Transfer complete (master mode) */
+#define I2C_ISR_TCR ((uint32_t)0x00000080) /*!< Transfer complete reload */
+#define I2C_ISR_BERR ((uint32_t)0x00000100) /*!< Bus error */
+#define I2C_ISR_ARLO ((uint32_t)0x00000200) /*!< Arbitration lost */
+#define I2C_ISR_OVR ((uint32_t)0x00000400) /*!< Overrun/Underrun */
+#define I2C_ISR_PECERR ((uint32_t)0x00000800) /*!< PEC error in reception */
+#define I2C_ISR_TIMEOUT ((uint32_t)0x00001000) /*!< Timeout or Tlow detection flag */
+#define I2C_ISR_ALERT ((uint32_t)0x00002000) /*!< SMBus alert */
+#define I2C_ISR_BUSY ((uint32_t)0x00008000) /*!< Bus busy */
+#define I2C_ISR_DIR ((uint32_t)0x00010000) /*!< Transfer direction (slave mode) */
+#define I2C_ISR_ADDCODE ((uint32_t)0x00FE0000) /*!< Address match code (slave mode) */
+
+/****************** Bit definition for I2C_ICR register ********************/
+#define I2C_ICR_ADDRCF ((uint32_t)0x00000008) /*!< Address matched clear flag */
+#define I2C_ICR_NACKCF ((uint32_t)0x00000010) /*!< NACK clear flag */
+#define I2C_ICR_STOPCF ((uint32_t)0x00000020) /*!< STOP detection clear flag */
+#define I2C_ICR_BERRCF ((uint32_t)0x00000100) /*!< Bus error clear flag */
+#define I2C_ICR_ARLOCF ((uint32_t)0x00000200) /*!< Arbitration lost clear flag */
+#define I2C_ICR_OVRCF ((uint32_t)0x00000400) /*!< Overrun/Underrun clear flag */
+#define I2C_ICR_PECCF ((uint32_t)0x00000800) /*!< PAC error clear flag */
+#define I2C_ICR_TIMOUTCF ((uint32_t)0x00001000) /*!< Timeout clear flag */
+#define I2C_ICR_ALERTCF ((uint32_t)0x00002000) /*!< Alert clear flag */
+
+/****************** Bit definition for I2C_PECR register *******************/
+#define I2C_PECR_PEC ((uint32_t)0x000000FF) /*!< PEC register */
+
+/****************** Bit definition for I2C_RXDR register *********************/
+#define I2C_RXDR_RXDATA ((uint32_t)0x000000FF) /*!< 8-bit receive data */
+
+/****************** Bit definition for I2C_TXDR register *******************/
+#define I2C_TXDR_TXDATA ((uint32_t)0x000000FF) /*!< 8-bit transmit data */
+
+/*****************************************************************************/
+/* */
+/* Independent WATCHDOG (IWDG) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for IWDG_KR register *******************/
+#define IWDG_KR_KEY ((uint32_t)0xFFFF) /*!< Key value (write only, read 0000h) */
+
+/******************* Bit definition for IWDG_PR register *******************/
+#define IWDG_PR_PR ((uint32_t)0x07) /*!< PR[2:0] (Prescaler divider) */
+#define IWDG_PR_PR_0 ((uint32_t)0x01) /*!< Bit 0 */
+#define IWDG_PR_PR_1 ((uint32_t)0x02) /*!< Bit 1 */
+#define IWDG_PR_PR_2 ((uint32_t)0x04) /*!< Bit 2 */
+
+/******************* Bit definition for IWDG_RLR register ******************/
+#define IWDG_RLR_RL ((uint32_t)0x0FFF) /*!< Watchdog counter reload value */
+
+/******************* Bit definition for IWDG_SR register *******************/
+#define IWDG_SR_PVU ((uint32_t)0x01) /*!< Watchdog prescaler value update */
+#define IWDG_SR_RVU ((uint32_t)0x02) /*!< Watchdog counter reload value update */
+#define IWDG_SR_WVU ((uint32_t)0x04) /*!< Watchdog counter window value update */
+
+/******************* Bit definition for IWDG_KR register *******************/
+#define IWDG_WINR_WIN ((uint32_t)0x0FFF) /*!< Watchdog counter window value */
+
+/*****************************************************************************/
+/* */
+/* Power Control (PWR) */
+/* */
+/*****************************************************************************/
+
+/******************** Bit definition for PWR_CR register *******************/
+#define PWR_CR_LPDS ((uint32_t)0x00000001) /*!< Low-power Deepsleep */
+#define PWR_CR_PDDS ((uint32_t)0x00000002) /*!< Power Down Deepsleep */
+#define PWR_CR_CWUF ((uint32_t)0x00000004) /*!< Clear Wakeup Flag */
+#define PWR_CR_CSBF ((uint32_t)0x00000008) /*!< Clear Standby Flag */
+#define PWR_CR_PVDE ((uint32_t)0x00000010) /*!< Power Voltage Detector Enable */
+
+#define PWR_CR_PLS ((uint32_t)0x000000E0) /*!< PLS[2:0] bits (PVD Level Selection) */
+#define PWR_CR_PLS_0 ((uint32_t)0x00000020) /*!< Bit 0 */
+#define PWR_CR_PLS_1 ((uint32_t)0x00000040) /*!< Bit 1 */
+#define PWR_CR_PLS_2 ((uint32_t)0x00000080) /*!< Bit 2 */
+
+/*!< PVD level configuration */
+#define PWR_CR_PLS_LEV0 ((uint32_t)0x00000000) /*!< PVD level 0 */
+#define PWR_CR_PLS_LEV1 ((uint32_t)0x00000020) /*!< PVD level 1 */
+#define PWR_CR_PLS_LEV2 ((uint32_t)0x00000040) /*!< PVD level 2 */
+#define PWR_CR_PLS_LEV3 ((uint32_t)0x00000060) /*!< PVD level 3 */
+#define PWR_CR_PLS_LEV4 ((uint32_t)0x00000080) /*!< PVD level 4 */
+#define PWR_CR_PLS_LEV5 ((uint32_t)0x000000A0) /*!< PVD level 5 */
+#define PWR_CR_PLS_LEV6 ((uint32_t)0x000000C0) /*!< PVD level 6 */
+#define PWR_CR_PLS_LEV7 ((uint32_t)0x000000E0) /*!< PVD level 7 */
+
+#define PWR_CR_DBP ((uint32_t)0x00000100) /*!< Disable Backup Domain write protection */
+
+/******************* Bit definition for PWR_CSR register *******************/
+#define PWR_CSR_WUF ((uint32_t)0x00000001) /*!< Wakeup Flag */
+#define PWR_CSR_SBF ((uint32_t)0x00000002) /*!< Standby Flag */
+#define PWR_CSR_PVDO ((uint32_t)0x00000004) /*!< PVD Output */
+#define PWR_CSR_VREFINTRDYF ((uint32_t)0x00000008) /*!< Internal voltage reference (VREFINT) ready flag */
+
+#define PWR_CSR_EWUP1 ((uint32_t)0x00000100) /*!< Enable WKUP pin 1 */
+#define PWR_CSR_EWUP2 ((uint32_t)0x00000200) /*!< Enable WKUP pin 2 */
+#define PWR_CSR_EWUP3 ((uint32_t)0x00000400) /*!< Enable WKUP pin 3 */
+#define PWR_CSR_EWUP4 ((uint32_t)0x00000800) /*!< Enable WKUP pin 4 */
+#define PWR_CSR_EWUP5 ((uint32_t)0x00001000) /*!< Enable WKUP pin 5 */
+#define PWR_CSR_EWUP6 ((uint32_t)0x00002000) /*!< Enable WKUP pin 6 */
+#define PWR_CSR_EWUP7 ((uint32_t)0x00004000) /*!< Enable WKUP pin 7 */
+#define PWR_CSR_EWUP8 ((uint32_t)0x00008000) /*!< Enable WKUP pin 8 */
+
+/*****************************************************************************/
+/* */
+/* Reset and Clock Control */
+/* */
+/*****************************************************************************/
+
+/******************** Bit definition for RCC_CR register *******************/
+#define RCC_CR_HSION ((uint32_t)0x00000001) /*!< Internal High Speed clock enable */
+#define RCC_CR_HSIRDY ((uint32_t)0x00000002) /*!< Internal High Speed clock ready flag */
+
+#define RCC_CR_HSITRIM ((uint32_t)0x000000F8) /*!< Internal High Speed clock trimming */
+#define RCC_CR_HSITRIM_0 ((uint32_t)0x00000008) /*!<Bit 0 */
+#define RCC_CR_HSITRIM_1 ((uint32_t)0x00000010) /*!<Bit 1 */
+#define RCC_CR_HSITRIM_2 ((uint32_t)0x00000020) /*!<Bit 2 */
+#define RCC_CR_HSITRIM_3 ((uint32_t)0x00000040) /*!<Bit 3 */
+#define RCC_CR_HSITRIM_4 ((uint32_t)0x00000080) /*!<Bit 4 */
+
+#define RCC_CR_HSICAL ((uint32_t)0x0000FF00) /*!< Internal High Speed clock Calibration */
+#define RCC_CR_HSICAL_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define RCC_CR_HSICAL_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define RCC_CR_HSICAL_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define RCC_CR_HSICAL_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define RCC_CR_HSICAL_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+#define RCC_CR_HSICAL_5 ((uint32_t)0x00002000) /*!<Bit 5 */
+#define RCC_CR_HSICAL_6 ((uint32_t)0x00004000) /*!<Bit 6 */
+#define RCC_CR_HSICAL_7 ((uint32_t)0x00008000) /*!<Bit 7 */
+
+#define RCC_CR_HSEON ((uint32_t)0x00010000) /*!< External High Speed clock enable */
+#define RCC_CR_HSERDY ((uint32_t)0x00020000) /*!< External High Speed clock ready flag */
+#define RCC_CR_HSEBYP ((uint32_t)0x00040000) /*!< External High Speed clock Bypass */
+#define RCC_CR_CSSON ((uint32_t)0x00080000) /*!< Clock Security System enable */
+#define RCC_CR_PLLON ((uint32_t)0x01000000) /*!< PLL enable */
+#define RCC_CR_PLLRDY ((uint32_t)0x02000000) /*!< PLL clock ready flag */
+
+/******************** Bit definition for RCC_CFGR register *****************/
+/*!< SW configuration */
+#define RCC_CFGR_SW ((uint32_t)0x00000003) /*!< SW[1:0] bits (System clock Switch) */
+#define RCC_CFGR_SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR_SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+#define RCC_CFGR_SW_HSI ((uint32_t)0x00000000) /*!< HSI selected as system clock */
+#define RCC_CFGR_SW_HSE ((uint32_t)0x00000001) /*!< HSE selected as system clock */
+#define RCC_CFGR_SW_PLL ((uint32_t)0x00000002) /*!< PLL selected as system clock */
+#define RCC_CFGR_SW_HSI48 ((uint32_t)0x00000003) /*!< HSI48 selected as system clock */
+
+/*!< SWS configuration */
+#define RCC_CFGR_SWS ((uint32_t)0x0000000C) /*!< SWS[1:0] bits (System Clock Switch Status) */
+#define RCC_CFGR_SWS_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define RCC_CFGR_SWS_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+
+#define RCC_CFGR_SWS_HSI ((uint32_t)0x00000000) /*!< HSI oscillator used as system clock */
+#define RCC_CFGR_SWS_HSE ((uint32_t)0x00000004) /*!< HSE oscillator used as system clock */
+#define RCC_CFGR_SWS_PLL ((uint32_t)0x00000008) /*!< PLL used as system clock */
+#define RCC_CFGR_SWS_HSI48 ((uint32_t)0x0000000C) /*!< HSI48 oscillator used as system clock */
+
+/*!< HPRE configuration */
+#define RCC_CFGR_HPRE ((uint32_t)0x000000F0) /*!< HPRE[3:0] bits (AHB prescaler) */
+#define RCC_CFGR_HPRE_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define RCC_CFGR_HPRE_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define RCC_CFGR_HPRE_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+#define RCC_CFGR_HPRE_3 ((uint32_t)0x00000080) /*!< Bit 3 */
+
+#define RCC_CFGR_HPRE_DIV1 ((uint32_t)0x00000000) /*!< SYSCLK not divided */
+#define RCC_CFGR_HPRE_DIV2 ((uint32_t)0x00000080) /*!< SYSCLK divided by 2 */
+#define RCC_CFGR_HPRE_DIV4 ((uint32_t)0x00000090) /*!< SYSCLK divided by 4 */
+#define RCC_CFGR_HPRE_DIV8 ((uint32_t)0x000000A0) /*!< SYSCLK divided by 8 */
+#define RCC_CFGR_HPRE_DIV16 ((uint32_t)0x000000B0) /*!< SYSCLK divided by 16 */
+#define RCC_CFGR_HPRE_DIV64 ((uint32_t)0x000000C0) /*!< SYSCLK divided by 64 */
+#define RCC_CFGR_HPRE_DIV128 ((uint32_t)0x000000D0) /*!< SYSCLK divided by 128 */
+#define RCC_CFGR_HPRE_DIV256 ((uint32_t)0x000000E0) /*!< SYSCLK divided by 256 */
+#define RCC_CFGR_HPRE_DIV512 ((uint32_t)0x000000F0) /*!< SYSCLK divided by 512 */
+
+/*!< PPRE configuration */
+#define RCC_CFGR_PPRE ((uint32_t)0x00000700) /*!< PRE[2:0] bits (APB prescaler) */
+#define RCC_CFGR_PPRE_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define RCC_CFGR_PPRE_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define RCC_CFGR_PPRE_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+
+#define RCC_CFGR_PPRE_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */
+#define RCC_CFGR_PPRE_DIV2 ((uint32_t)0x00000400) /*!< HCLK divided by 2 */
+#define RCC_CFGR_PPRE_DIV4 ((uint32_t)0x00000500) /*!< HCLK divided by 4 */
+#define RCC_CFGR_PPRE_DIV8 ((uint32_t)0x00000600) /*!< HCLK divided by 8 */
+#define RCC_CFGR_PPRE_DIV16 ((uint32_t)0x00000700) /*!< HCLK divided by 16 */
+
+/*!< ADCPPRE configuration */
+#define RCC_CFGR_ADCPRE ((uint32_t)0x00004000) /*!< ADCPRE bit (ADC prescaler) */
+
+#define RCC_CFGR_ADCPRE_DIV2 ((uint32_t)0x00000000) /*!< PCLK divided by 2 */
+#define RCC_CFGR_ADCPRE_DIV4 ((uint32_t)0x00004000) /*!< PCLK divided by 4 */
+
+#define RCC_CFGR_PLLSRC ((uint32_t)0x00018000) /*!< PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSI_DIV2 ((uint32_t)0x00000000) /*!< HSI clock divided by 2 selected as PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSI_PREDIV ((uint32_t)0x00008000) /*!< HSI/PREDIV clock selected as PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSE_PREDIV ((uint32_t)0x00010000) /*!< HSE/PREDIV clock selected as PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSI48_PREDIV ((uint32_t)0x00018000) /*!< HSI48/PREDIV clock selected as PLL entry clock source */
+
+#define RCC_CFGR_PLLXTPRE ((uint32_t)0x00020000) /*!< HSE divider for PLL entry */
+#define RCC_CFGR_PLLXTPRE_HSE_PREDIV_DIV1 ((uint32_t)0x00000000) /*!< HSE/PREDIV clock not divided for PLL entry */
+#define RCC_CFGR_PLLXTPRE_HSE_PREDIV_DIV2 ((uint32_t)0x00020000) /*!< HSE/PREDIV clock divided by 2 for PLL entry */
+
+/*!< PLLMUL configuration */
+#define RCC_CFGR_PLLMUL ((uint32_t)0x003C0000) /*!< PLLMUL[3:0] bits (PLL multiplication factor) */
+#define RCC_CFGR_PLLMUL_0 ((uint32_t)0x00040000) /*!< Bit 0 */
+#define RCC_CFGR_PLLMUL_1 ((uint32_t)0x00080000) /*!< Bit 1 */
+#define RCC_CFGR_PLLMUL_2 ((uint32_t)0x00100000) /*!< Bit 2 */
+#define RCC_CFGR_PLLMUL_3 ((uint32_t)0x00200000) /*!< Bit 3 */
+
+#define RCC_CFGR_PLLMUL2 ((uint32_t)0x00000000) /*!< PLL input clock*2 */
+#define RCC_CFGR_PLLMUL3 ((uint32_t)0x00040000) /*!< PLL input clock*3 */
+#define RCC_CFGR_PLLMUL4 ((uint32_t)0x00080000) /*!< PLL input clock*4 */
+#define RCC_CFGR_PLLMUL5 ((uint32_t)0x000C0000) /*!< PLL input clock*5 */
+#define RCC_CFGR_PLLMUL6 ((uint32_t)0x00100000) /*!< PLL input clock*6 */
+#define RCC_CFGR_PLLMUL7 ((uint32_t)0x00140000) /*!< PLL input clock*7 */
+#define RCC_CFGR_PLLMUL8 ((uint32_t)0x00180000) /*!< PLL input clock*8 */
+#define RCC_CFGR_PLLMUL9 ((uint32_t)0x001C0000) /*!< PLL input clock*9 */
+#define RCC_CFGR_PLLMUL10 ((uint32_t)0x00200000) /*!< PLL input clock10 */
+#define RCC_CFGR_PLLMUL11 ((uint32_t)0x00240000) /*!< PLL input clock*11 */
+#define RCC_CFGR_PLLMUL12 ((uint32_t)0x00280000) /*!< PLL input clock*12 */
+#define RCC_CFGR_PLLMUL13 ((uint32_t)0x002C0000) /*!< PLL input clock*13 */
+#define RCC_CFGR_PLLMUL14 ((uint32_t)0x00300000) /*!< PLL input clock*14 */
+#define RCC_CFGR_PLLMUL15 ((uint32_t)0x00340000) /*!< PLL input clock*15 */
+#define RCC_CFGR_PLLMUL16 ((uint32_t)0x00380000) /*!< PLL input clock*16 */
+
+/*!< USB configuration */
+#define RCC_CFGR_USBPRE ((uint32_t)0x00400000) /*!< USB prescaler */
+
+/*!< MCO configuration */
+#define RCC_CFGR_MCO ((uint32_t)0x0F000000) /*!< MCO[3:0] bits (Microcontroller Clock Output) */
+#define RCC_CFGR_MCO_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define RCC_CFGR_MCO_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define RCC_CFGR_MCO_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+#define RCC_CFGR_MCO_3 ((uint32_t)0x08000000) /*!< Bit 3 */
+
+#define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
+#define RCC_CFGR_MCO_HSI14 ((uint32_t)0x01000000) /*!< HSI14 clock selected as MCO source */
+#define RCC_CFGR_MCO_LSI ((uint32_t)0x02000000) /*!< LSI clock selected as MCO source */
+#define RCC_CFGR_MCO_LSE ((uint32_t)0x03000000) /*!< LSE clock selected as MCO source */
+#define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x04000000) /*!< System clock selected as MCO source */
+#define RCC_CFGR_MCO_HSI ((uint32_t)0x05000000) /*!< HSI clock selected as MCO source */
+#define RCC_CFGR_MCO_HSE ((uint32_t)0x06000000) /*!< HSE clock selected as MCO source */
+#define RCC_CFGR_MCO_PLL ((uint32_t)0x07000000) /*!< PLL clock divided by 2 selected as MCO source */
+#define RCC_CFGR_MCO_HSI48 ((uint32_t)0x08000000) /*!< HSI48 clock selected as MCO source */
+
+#define RCC_CFGR_MCOPRE ((uint32_t)0x70000000) /*!< MCO prescaler */
+#define RCC_CFGR_MCOPRE_DIV1 ((uint32_t)0x00000000) /*!< MCO is divided by 1 */
+#define RCC_CFGR_MCOPRE_DIV2 ((uint32_t)0x10000000) /*!< MCO is divided by 2 */
+#define RCC_CFGR_MCOPRE_DIV4 ((uint32_t)0x20000000) /*!< MCO is divided by 4 */
+#define RCC_CFGR_MCOPRE_DIV8 ((uint32_t)0x30000000) /*!< MCO is divided by 8 */
+#define RCC_CFGR_MCOPRE_DIV16 ((uint32_t)0x40000000) /*!< MCO is divided by 16 */
+#define RCC_CFGR_MCOPRE_DIV32 ((uint32_t)0x50000000) /*!< MCO is divided by 32 */
+#define RCC_CFGR_MCOPRE_DIV64 ((uint32_t)0x60000000) /*!< MCO is divided by 64 */
+#define RCC_CFGR_MCOPRE_DIV128 ((uint32_t)0x70000000) /*!< MCO is divided by 128 */
+
+#define RCC_CFGR_PLLNODIV ((uint32_t)0x80000000) /*!< PLL is not divided to MCO */
+
+/*!<****************** Bit definition for RCC_CIR register *****************/
+#define RCC_CIR_LSIRDYF ((uint32_t)0x00000001) /*!< LSI Ready Interrupt flag */
+#define RCC_CIR_LSERDYF ((uint32_t)0x00000002) /*!< LSE Ready Interrupt flag */
+#define RCC_CIR_HSIRDYF ((uint32_t)0x00000004) /*!< HSI Ready Interrupt flag */
+#define RCC_CIR_HSERDYF ((uint32_t)0x00000008) /*!< HSE Ready Interrupt flag */
+#define RCC_CIR_PLLRDYF ((uint32_t)0x00000010) /*!< PLL Ready Interrupt flag */
+#define RCC_CIR_HSI14RDYF ((uint32_t)0x00000020) /*!< HSI14 Ready Interrupt flag */
+#define RCC_CIR_HSI48RDYF ((uint32_t)0x00000040) /*!< HSI48 Ready Interrupt flag */
+#define RCC_CIR_CSSF ((uint32_t)0x00000080) /*!< Clock Security System Interrupt flag */
+#define RCC_CIR_LSIRDYIE ((uint32_t)0x00000100) /*!< LSI Ready Interrupt Enable */
+#define RCC_CIR_LSERDYIE ((uint32_t)0x00000200) /*!< LSE Ready Interrupt Enable */
+#define RCC_CIR_HSIRDYIE ((uint32_t)0x00000400) /*!< HSI Ready Interrupt Enable */
+#define RCC_CIR_HSERDYIE ((uint32_t)0x00000800) /*!< HSE Ready Interrupt Enable */
+#define RCC_CIR_PLLRDYIE ((uint32_t)0x00001000) /*!< PLL Ready Interrupt Enable */
+#define RCC_CIR_HSI14RDYIE ((uint32_t)0x00002000) /*!< HSI14 Ready Interrupt Enable */
+#define RCC_CIR_HSI48RDYIE ((uint32_t)0x00004000) /*!< HSI48 Ready Interrupt Enable */
+#define RCC_CIR_LSIRDYC ((uint32_t)0x00010000) /*!< LSI Ready Interrupt Clear */
+#define RCC_CIR_LSERDYC ((uint32_t)0x00020000) /*!< LSE Ready Interrupt Clear */
+#define RCC_CIR_HSIRDYC ((uint32_t)0x00040000) /*!< HSI Ready Interrupt Clear */
+#define RCC_CIR_HSERDYC ((uint32_t)0x00080000) /*!< HSE Ready Interrupt Clear */
+#define RCC_CIR_PLLRDYC ((uint32_t)0x00100000) /*!< PLL Ready Interrupt Clear */
+#define RCC_CIR_HSI14RDYC ((uint32_t)0x00200000) /*!< HSI14 Ready Interrupt Clear */
+#define RCC_CIR_HSI48RDYC ((uint32_t)0x00400000) /*!< HSI48 Ready Interrupt Clear */
+#define RCC_CIR_CSSC ((uint32_t)0x00800000) /*!< Clock Security System Interrupt Clear */
+
+/***************** Bit definition for RCC_APB2RSTR register ****************/
+#define RCC_APB2RSTR_SYSCFGRST ((uint32_t)0x00000001) /*!< SYSCFG clock reset */
+#define RCC_APB2RSTR_ADCRST ((uint32_t)0x00000200) /*!< ADC clock reset */
+#define RCC_APB2RSTR_TIM1RST ((uint32_t)0x00000800) /*!< TIM1 clock reset */
+#define RCC_APB2RSTR_SPI1RST ((uint32_t)0x00001000) /*!< SPI1 clock reset */
+#define RCC_APB2RSTR_USART1RST ((uint32_t)0x00004000) /*!< USART1 clock reset */
+#define RCC_APB2RSTR_TIM15RST ((uint32_t)0x00010000) /*!< TIM15 clock reset */
+#define RCC_APB2RSTR_TIM16RST ((uint32_t)0x00020000) /*!< TIM16 clock reset */
+#define RCC_APB2RSTR_TIM17RST ((uint32_t)0x00040000) /*!< TIM17 clock reset */
+#define RCC_APB2RSTR_DBGMCURST ((uint32_t)0x00400000) /*!< DBGMCU clock reset */
+
+/*!< Old ADC1 clock reset bit definition maintained for legacy purpose */
+#define RCC_APB2RSTR_ADC1RST RCC_APB2RSTR_ADCRST
+
+/***************** Bit definition for RCC_APB1RSTR register ****************/
+#define RCC_APB1RSTR_TIM2RST ((uint32_t)0x00000001) /*!< Timer 2 clock reset */
+#define RCC_APB1RSTR_TIM3RST ((uint32_t)0x00000002) /*!< Timer 3 clock reset */
+#define RCC_APB1RSTR_TIM6RST ((uint32_t)0x00000010) /*!< Timer 6 clock reset */
+#define RCC_APB1RSTR_TIM7RST ((uint32_t)0x00000020) /*!< Timer 7 clock reset */
+#define RCC_APB1RSTR_TIM14RST ((uint32_t)0x00000100) /*!< Timer 14 clock reset */
+#define RCC_APB1RSTR_WWDGRST ((uint32_t)0x00000800) /*!< Window Watchdog clock reset */
+#define RCC_APB1RSTR_SPI2RST ((uint32_t)0x00004000) /*!< SPI2 clock reset */
+#define RCC_APB1RSTR_USART2RST ((uint32_t)0x00020000) /*!< USART 2 clock reset */
+#define RCC_APB1RSTR_USART3RST ((uint32_t)0x00040000) /*!< USART 3 clock reset */
+#define RCC_APB1RSTR_USART4RST ((uint32_t)0x00080000) /*!< USART 4 clock reset */
+#define RCC_APB1RSTR_I2C1RST ((uint32_t)0x00200000) /*!< I2C 1 clock reset */
+#define RCC_APB1RSTR_I2C2RST ((uint32_t)0x00400000) /*!< I2C 2 clock reset */
+#define RCC_APB1RSTR_USBRST ((uint32_t)0x00800000) /*!< USB clock reset */
+#define RCC_APB1RSTR_CANRST ((uint32_t)0x02000000) /*!< CAN clock reset */
+#define RCC_APB1RSTR_CRSRST ((uint32_t)0x08000000) /*!< CRS clock reset */
+#define RCC_APB1RSTR_PWRRST ((uint32_t)0x10000000) /*!< PWR clock reset */
+#define RCC_APB1RSTR_DACRST ((uint32_t)0x20000000) /*!< DAC clock reset */
+#define RCC_APB1RSTR_CECRST ((uint32_t)0x40000000) /*!< CEC clock reset */
+
+/****************** Bit definition for RCC_AHBENR register *****************/
+#define RCC_AHBENR_DMAEN ((uint32_t)0x00000001) /*!< DMA1 clock enable */
+#define RCC_AHBENR_SRAMEN ((uint32_t)0x00000004) /*!< SRAM interface clock enable */
+#define RCC_AHBENR_FLITFEN ((uint32_t)0x00000010) /*!< FLITF clock enable */
+#define RCC_AHBENR_CRCEN ((uint32_t)0x00000040) /*!< CRC clock enable */
+#define RCC_AHBENR_GPIOAEN ((uint32_t)0x00020000) /*!< GPIOA clock enable */
+#define RCC_AHBENR_GPIOBEN ((uint32_t)0x00040000) /*!< GPIOB clock enable */
+#define RCC_AHBENR_GPIOCEN ((uint32_t)0x00080000) /*!< GPIOC clock enable */
+#define RCC_AHBENR_GPIODEN ((uint32_t)0x00100000) /*!< GPIOD clock enable */
+#define RCC_AHBENR_GPIOEEN ((uint32_t)0x00200000) /*!< GPIOE clock enable */
+#define RCC_AHBENR_GPIOFEN ((uint32_t)0x00400000) /*!< GPIOF clock enable */
+#define RCC_AHBENR_TSCEN ((uint32_t)0x01000000) /*!< TS controller clock enable */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_AHBENR_DMA1EN RCC_AHBENR_DMAEN /*!< DMA1 clock enable */
+#define RCC_AHBENR_TSEN RCC_AHBENR_TSCEN /*!< TS clock enable */
+
+/***************** Bit definition for RCC_APB2ENR register *****************/
+#define RCC_APB2ENR_SYSCFGCOMPEN ((uint32_t)0x00000001) /*!< SYSCFG and comparator clock enable */
+#define RCC_APB2ENR_ADCEN ((uint32_t)0x00000200) /*!< ADC1 clock enable */
+#define RCC_APB2ENR_TIM1EN ((uint32_t)0x00000800) /*!< TIM1 clock enable */
+#define RCC_APB2ENR_SPI1EN ((uint32_t)0x00001000) /*!< SPI1 clock enable */
+#define RCC_APB2ENR_USART1EN ((uint32_t)0x00004000) /*!< USART1 clock enable */
+#define RCC_APB2ENR_TIM15EN ((uint32_t)0x00010000) /*!< TIM15 clock enable */
+#define RCC_APB2ENR_TIM16EN ((uint32_t)0x00020000) /*!< TIM16 clock enable */
+#define RCC_APB2ENR_TIM17EN ((uint32_t)0x00040000) /*!< TIM17 clock enable */
+#define RCC_APB2ENR_DBGMCUEN ((uint32_t)0x00400000) /*!< DBGMCU clock enable */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_APB2ENR_SYSCFGEN RCC_APB2ENR_SYSCFGCOMPEN /*!< SYSCFG clock enable */
+#define RCC_APB2ENR_ADC1EN RCC_APB2ENR_ADCEN /*!< ADC1 clock enable */
+
+/***************** Bit definition for RCC_APB1ENR register *****************/
+#define RCC_APB1ENR_TIM2EN ((uint32_t)0x00000001) /*!< Timer 2 clock enable */
+#define RCC_APB1ENR_TIM3EN ((uint32_t)0x00000002) /*!< Timer 3 clock enable */
+#define RCC_APB1ENR_TIM6EN ((uint32_t)0x00000010) /*!< Timer 6 clock enable */
+#define RCC_APB1ENR_TIM7EN ((uint32_t)0x00000020) /*!< Timer 7 clock enable */
+#define RCC_APB1ENR_TIM14EN ((uint32_t)0x00000100) /*!< Timer 14 clock enable */
+#define RCC_APB1ENR_WWDGEN ((uint32_t)0x00000800) /*!< Window Watchdog clock enable */
+#define RCC_APB1ENR_SPI2EN ((uint32_t)0x00004000) /*!< SPI2 clock enable */
+#define RCC_APB1ENR_USART2EN ((uint32_t)0x00020000) /*!< USART2 clock enable */
+#define RCC_APB1ENR_USART3EN ((uint32_t)0x00040000) /*!< USART3 clock enable */
+#define RCC_APB1ENR_USART4EN ((uint32_t)0x00080000) /*!< USART4 clock enable */
+#define RCC_APB1ENR_I2C1EN ((uint32_t)0x00200000) /*!< I2C1 clock enable */
+#define RCC_APB1ENR_I2C2EN ((uint32_t)0x00400000) /*!< I2C2 clock enable */
+#define RCC_APB1ENR_USBEN ((uint32_t)0x00800000) /*!< USB clock enable */
+#define RCC_APB1ENR_CANEN ((uint32_t)0x02000000) /*!< CAN clock enable */
+#define RCC_APB1ENR_CRSEN ((uint32_t)0x08000000) /*!< CRS clock enable */
+#define RCC_APB1ENR_PWREN ((uint32_t)0x10000000) /*!< PWR clock enable */
+#define RCC_APB1ENR_DACEN ((uint32_t)0x20000000) /*!< DAC clock enable */
+#define RCC_APB1ENR_CECEN ((uint32_t)0x40000000) /*!< CEC clock enable */
+
+/******************* Bit definition for RCC_BDCR register ******************/
+#define RCC_BDCR_LSEON ((uint32_t)0x00000001) /*!< External Low Speed oscillator enable */
+#define RCC_BDCR_LSERDY ((uint32_t)0x00000002) /*!< External Low Speed oscillator Ready */
+#define RCC_BDCR_LSEBYP ((uint32_t)0x00000004) /*!< External Low Speed oscillator Bypass */
+
+#define RCC_BDCR_LSEDRV ((uint32_t)0x00000018) /*!< LSEDRV[1:0] bits (LSE Osc. drive capability) */
+#define RCC_BDCR_LSEDRV_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define RCC_BDCR_LSEDRV_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+
+#define RCC_BDCR_RTCSEL ((uint32_t)0x00000300) /*!< RTCSEL[1:0] bits (RTC clock source selection) */
+#define RCC_BDCR_RTCSEL_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define RCC_BDCR_RTCSEL_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+
+/*!< RTC configuration */
+#define RCC_BDCR_RTCSEL_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
+#define RCC_BDCR_RTCSEL_LSE ((uint32_t)0x00000100) /*!< LSE oscillator clock used as RTC clock */
+#define RCC_BDCR_RTCSEL_LSI ((uint32_t)0x00000200) /*!< LSI oscillator clock used as RTC clock */
+#define RCC_BDCR_RTCSEL_HSE ((uint32_t)0x00000300) /*!< HSE oscillator clock divided by 128 used as RTC clock */
+
+#define RCC_BDCR_RTCEN ((uint32_t)0x00008000) /*!< RTC clock enable */
+#define RCC_BDCR_BDRST ((uint32_t)0x00010000) /*!< Backup domain software reset */
+
+/******************* Bit definition for RCC_CSR register *******************/
+#define RCC_CSR_LSION ((uint32_t)0x00000001) /*!< Internal Low Speed oscillator enable */
+#define RCC_CSR_LSIRDY ((uint32_t)0x00000002) /*!< Internal Low Speed oscillator Ready */
+#define RCC_CSR_V18PWRRSTF ((uint32_t)0x00800000) /*!< V1.8 power domain reset flag */
+#define RCC_CSR_RMVF ((uint32_t)0x01000000) /*!< Remove reset flag */
+#define RCC_CSR_OBLRSTF ((uint32_t)0x02000000) /*!< OBL reset flag */
+#define RCC_CSR_PINRSTF ((uint32_t)0x04000000) /*!< PIN reset flag */
+#define RCC_CSR_PORRSTF ((uint32_t)0x08000000) /*!< POR/PDR reset flag */
+#define RCC_CSR_SFTRSTF ((uint32_t)0x10000000) /*!< Software Reset flag */
+#define RCC_CSR_IWDGRSTF ((uint32_t)0x20000000) /*!< Independent Watchdog reset flag */
+#define RCC_CSR_WWDGRSTF ((uint32_t)0x40000000) /*!< Window watchdog reset flag */
+#define RCC_CSR_LPWRRSTF ((uint32_t)0x80000000) /*!< Low-Power reset flag */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_CSR_OBL RCC_CSR_OBLRSTF /*!< OBL reset flag */
+
+/******************* Bit definition for RCC_AHBRSTR register ***************/
+#define RCC_AHBRSTR_GPIOARST ((uint32_t)0x00020000) /*!< GPIOA clock reset */
+#define RCC_AHBRSTR_GPIOBRST ((uint32_t)0x00040000) /*!< GPIOB clock reset */
+#define RCC_AHBRSTR_GPIOCRST ((uint32_t)0x00080000) /*!< GPIOC clock reset */
+#define RCC_AHBRSTR_GPIODRST ((uint32_t)0x00100000) /*!< GPIOD clock reset */
+#define RCC_AHBRSTR_GPIOERST ((uint32_t)0x00200000) /*!< GPIOE clock reset */
+#define RCC_AHBRSTR_GPIOFRST ((uint32_t)0x00400000) /*!< GPIOF clock reset */
+#define RCC_AHBRSTR_TSCRST ((uint32_t)0x01000000) /*!< TS clock reset */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_AHBRSTR_TSRST RCC_AHBRSTR_TSCRST /*!< TS clock reset */
+
+/******************* Bit definition for RCC_CFGR2 register *****************/
+/*!< PREDIV configuration */
+#define RCC_CFGR2_PREDIV ((uint32_t)0x0000000F) /*!< PREDIV[3:0] bits */
+#define RCC_CFGR2_PREDIV_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR2_PREDIV_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define RCC_CFGR2_PREDIV_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define RCC_CFGR2_PREDIV_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+
+#define RCC_CFGR2_PREDIV_DIV1 ((uint32_t)0x00000000) /*!< PREDIV input clock not divided */
+#define RCC_CFGR2_PREDIV_DIV2 ((uint32_t)0x00000001) /*!< PREDIV input clock divided by 2 */
+#define RCC_CFGR2_PREDIV_DIV3 ((uint32_t)0x00000002) /*!< PREDIV input clock divided by 3 */
+#define RCC_CFGR2_PREDIV_DIV4 ((uint32_t)0x00000003) /*!< PREDIV input clock divided by 4 */
+#define RCC_CFGR2_PREDIV_DIV5 ((uint32_t)0x00000004) /*!< PREDIV input clock divided by 5 */
+#define RCC_CFGR2_PREDIV_DIV6 ((uint32_t)0x00000005) /*!< PREDIV input clock divided by 6 */
+#define RCC_CFGR2_PREDIV_DIV7 ((uint32_t)0x00000006) /*!< PREDIV input clock divided by 7 */
+#define RCC_CFGR2_PREDIV_DIV8 ((uint32_t)0x00000007) /*!< PREDIV input clock divided by 8 */
+#define RCC_CFGR2_PREDIV_DIV9 ((uint32_t)0x00000008) /*!< PREDIV input clock divided by 9 */
+#define RCC_CFGR2_PREDIV_DIV10 ((uint32_t)0x00000009) /*!< PREDIV input clock divided by 10 */
+#define RCC_CFGR2_PREDIV_DIV11 ((uint32_t)0x0000000A) /*!< PREDIV input clock divided by 11 */
+#define RCC_CFGR2_PREDIV_DIV12 ((uint32_t)0x0000000B) /*!< PREDIV input clock divided by 12 */
+#define RCC_CFGR2_PREDIV_DIV13 ((uint32_t)0x0000000C) /*!< PREDIV input clock divided by 13 */
+#define RCC_CFGR2_PREDIV_DIV14 ((uint32_t)0x0000000D) /*!< PREDIV input clock divided by 14 */
+#define RCC_CFGR2_PREDIV_DIV15 ((uint32_t)0x0000000E) /*!< PREDIV input clock divided by 15 */
+#define RCC_CFGR2_PREDIV_DIV16 ((uint32_t)0x0000000F) /*!< PREDIV input clock divided by 16 */
+
+/******************* Bit definition for RCC_CFGR3 register *****************/
+/*!< USART1 Clock source selection */
+#define RCC_CFGR3_USART1SW ((uint32_t)0x00000003) /*!< USART1SW[1:0] bits */
+#define RCC_CFGR3_USART1SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR3_USART1SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+#define RCC_CFGR3_USART1SW_PCLK ((uint32_t)0x00000000) /*!< PCLK clock used as USART1 clock source */
+#define RCC_CFGR3_USART1SW_SYSCLK ((uint32_t)0x00000001) /*!< System clock selected as USART1 clock source */
+#define RCC_CFGR3_USART1SW_LSE ((uint32_t)0x00000002) /*!< LSE oscillator clock used as USART1 clock source */
+#define RCC_CFGR3_USART1SW_HSI ((uint32_t)0x00000003) /*!< HSI oscillator clock used as USART1 clock source */
+
+/*!< I2C1 Clock source selection */
+#define RCC_CFGR3_I2C1SW ((uint32_t)0x00000010) /*!< I2C1SW bits */
+
+#define RCC_CFGR3_I2C1SW_HSI ((uint32_t)0x00000000) /*!< HSI oscillator clock used as I2C1 clock source */
+#define RCC_CFGR3_I2C1SW_SYSCLK ((uint32_t)0x00000010) /*!< System clock selected as I2C1 clock source */
+
+/*!< CEC Clock source selection */
+#define RCC_CFGR3_CECSW ((uint32_t)0x00000040) /*!< CECSW bits */
+
+#define RCC_CFGR3_CECSW_HSI_DIV244 ((uint32_t)0x00000000) /*!< HSI clock divided by 244 selected as HDMI CEC entry clock source */
+#define RCC_CFGR3_CECSW_LSE ((uint32_t)0x00000040) /*!< LSE clock selected as HDMI CEC entry clock source */
+
+/*!< USB Clock source selection */
+#define RCC_CFGR3_USBSW ((uint32_t)0x00000080) /*!< USBSW bits */
+
+#define RCC_CFGR3_USBSW_HSI48 ((uint32_t)0x00000000) /*!< HSI48 oscillator clock used as USB clock source */
+#define RCC_CFGR3_USBSW_PLLCLK ((uint32_t)0x00000080) /*!< PLLCLK selected as USB clock source */
+
+/*!< USART2 Clock source selection */
+#define RCC_CFGR3_USART2SW ((uint32_t)0x00030000) /*!< USART2SW[1:0] bits */
+#define RCC_CFGR3_USART2SW_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define RCC_CFGR3_USART2SW_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+
+#define RCC_CFGR3_USART2SW_PCLK ((uint32_t)0x00000000) /*!< PCLK clock used as USART2 clock source */
+#define RCC_CFGR3_USART2SW_SYSCLK ((uint32_t)0x00010000) /*!< System clock selected as USART2 clock source */
+#define RCC_CFGR3_USART2SW_LSE ((uint32_t)0x00020000) /*!< LSE oscillator clock used as USART2 clock source */
+#define RCC_CFGR3_USART2SW_HSI ((uint32_t)0x00030000) /*!< HSI oscillator clock used as USART2 clock source */
+
+/******************* Bit definition for RCC_CR2 register *******************/
+#define RCC_CR2_HSI14ON ((uint32_t)0x00000001) /*!< Internal High Speed 14MHz clock enable */
+#define RCC_CR2_HSI14RDY ((uint32_t)0x00000002) /*!< Internal High Speed 14MHz clock ready flag */
+#define RCC_CR2_HSI14DIS ((uint32_t)0x00000004) /*!< Internal High Speed 14MHz clock disable */
+#define RCC_CR2_HSI14TRIM ((uint32_t)0x000000F8) /*!< Internal High Speed 14MHz clock trimming */
+#define RCC_CR2_HSI14CAL ((uint32_t)0x0000FF00) /*!< Internal High Speed 14MHz clock Calibration */
+#define RCC_CR2_HSI48ON ((uint32_t)0x00010000) /*!< Internal High Speed 48MHz clock enable */
+#define RCC_CR2_HSI48RDY ((uint32_t)0x00020000) /*!< Internal High Speed 48MHz clock ready flag */
+#define RCC_CR2_HSI48CAL ((uint32_t)0xFF000000) /*!< Internal High Speed 48MHz clock Calibration */
+
+/*****************************************************************************/
+/* */
+/* Real-Time Clock (RTC) */
+/* */
+/*****************************************************************************/
+/******************** Bits definition for RTC_TR register ******************/
+#define RTC_TR_PM ((uint32_t)0x00400000)
+#define RTC_TR_HT ((uint32_t)0x00300000)
+#define RTC_TR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TR_HU ((uint32_t)0x000F0000)
+#define RTC_TR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TR_MNT ((uint32_t)0x00007000)
+#define RTC_TR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TR_MNU ((uint32_t)0x00000F00)
+#define RTC_TR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TR_ST ((uint32_t)0x00000070)
+#define RTC_TR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TR_SU ((uint32_t)0x0000000F)
+#define RTC_TR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_DR register ******************/
+#define RTC_DR_YT ((uint32_t)0x00F00000)
+#define RTC_DR_YT_0 ((uint32_t)0x00100000)
+#define RTC_DR_YT_1 ((uint32_t)0x00200000)
+#define RTC_DR_YT_2 ((uint32_t)0x00400000)
+#define RTC_DR_YT_3 ((uint32_t)0x00800000)
+#define RTC_DR_YU ((uint32_t)0x000F0000)
+#define RTC_DR_YU_0 ((uint32_t)0x00010000)
+#define RTC_DR_YU_1 ((uint32_t)0x00020000)
+#define RTC_DR_YU_2 ((uint32_t)0x00040000)
+#define RTC_DR_YU_3 ((uint32_t)0x00080000)
+#define RTC_DR_WDU ((uint32_t)0x0000E000)
+#define RTC_DR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_DR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_DR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_DR_MT ((uint32_t)0x00001000)
+#define RTC_DR_MU ((uint32_t)0x00000F00)
+#define RTC_DR_MU_0 ((uint32_t)0x00000100)
+#define RTC_DR_MU_1 ((uint32_t)0x00000200)
+#define RTC_DR_MU_2 ((uint32_t)0x00000400)
+#define RTC_DR_MU_3 ((uint32_t)0x00000800)
+#define RTC_DR_DT ((uint32_t)0x00000030)
+#define RTC_DR_DT_0 ((uint32_t)0x00000010)
+#define RTC_DR_DT_1 ((uint32_t)0x00000020)
+#define RTC_DR_DU ((uint32_t)0x0000000F)
+#define RTC_DR_DU_0 ((uint32_t)0x00000001)
+#define RTC_DR_DU_1 ((uint32_t)0x00000002)
+#define RTC_DR_DU_2 ((uint32_t)0x00000004)
+#define RTC_DR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_CR register ******************/
+#define RTC_CR_COE ((uint32_t)0x00800000)
+#define RTC_CR_OSEL ((uint32_t)0x00600000)
+#define RTC_CR_OSEL_0 ((uint32_t)0x00200000)
+#define RTC_CR_OSEL_1 ((uint32_t)0x00400000)
+#define RTC_CR_POL ((uint32_t)0x00100000)
+#define RTC_CR_COSEL ((uint32_t)0x00080000)
+#define RTC_CR_BCK ((uint32_t)0x00040000)
+#define RTC_CR_SUB1H ((uint32_t)0x00020000)
+#define RTC_CR_ADD1H ((uint32_t)0x00010000)
+#define RTC_CR_TSIE ((uint32_t)0x00008000)
+#define RTC_CR_ALRAIE ((uint32_t)0x00001000)
+#define RTC_CR_TSE ((uint32_t)0x00000800)
+#define RTC_CR_WUTE ((uint32_t)0x00000400)
+#define RTC_CR_ALRAE ((uint32_t)0x00000100)
+#define RTC_CR_FMT ((uint32_t)0x00000040)
+#define RTC_CR_BYPSHAD ((uint32_t)0x00000020)
+#define RTC_CR_REFCKON ((uint32_t)0x00000010)
+#define RTC_CR_TSEDGE ((uint32_t)0x00000008)
+#define RTC_CR_WUCKSEL ((uint32_t)0x00000007)
+#define RTC_CR_WUCKSEL_0 ((uint32_t)0x00000001)
+#define RTC_CR_WUCKSEL_1 ((uint32_t)0x00000002)
+#define RTC_CR_WUCKSEL_2 ((uint32_t)0x00000004)
+
+/******************** Bits definition for RTC_ISR register *****************/
+#define RTC_ISR_RECALPF ((uint32_t)0x00010000)
+#define RTC_ISR_TAMP3F ((uint32_t)0x00008000)
+#define RTC_ISR_TAMP2F ((uint32_t)0x00004000)
+#define RTC_ISR_TAMP1F ((uint32_t)0x00002000)
+#define RTC_ISR_TSOVF ((uint32_t)0x00001000)
+#define RTC_ISR_TSF ((uint32_t)0x00000800)
+#define RTC_ISR_WUTF ((uint32_t)0x00000400)
+#define RTC_ISR_ALRAF ((uint32_t)0x00000100)
+#define RTC_ISR_INIT ((uint32_t)0x00000080)
+#define RTC_ISR_INITF ((uint32_t)0x00000040)
+#define RTC_ISR_RSF ((uint32_t)0x00000020)
+#define RTC_ISR_INITS ((uint32_t)0x00000010)
+#define RTC_ISR_SHPF ((uint32_t)0x00000008)
+#define RTC_ISR_WUTWF ((uint32_t)0x00000004)
+#define RTC_ISR_ALRAWF ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_PRER register ****************/
+#define RTC_PRER_PREDIV_A ((uint32_t)0x007F0000)
+#define RTC_PRER_PREDIV_S ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_WUTR register ****************/
+#define RTC_WUTR_WUT ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_ALRMAR register **************/
+#define RTC_ALRMAR_MSK4 ((uint32_t)0x80000000)
+#define RTC_ALRMAR_WDSEL ((uint32_t)0x40000000)
+#define RTC_ALRMAR_DT ((uint32_t)0x30000000)
+#define RTC_ALRMAR_DT_0 ((uint32_t)0x10000000)
+#define RTC_ALRMAR_DT_1 ((uint32_t)0x20000000)
+#define RTC_ALRMAR_DU ((uint32_t)0x0F000000)
+#define RTC_ALRMAR_DU_0 ((uint32_t)0x01000000)
+#define RTC_ALRMAR_DU_1 ((uint32_t)0x02000000)
+#define RTC_ALRMAR_DU_2 ((uint32_t)0x04000000)
+#define RTC_ALRMAR_DU_3 ((uint32_t)0x08000000)
+#define RTC_ALRMAR_MSK3 ((uint32_t)0x00800000)
+#define RTC_ALRMAR_PM ((uint32_t)0x00400000)
+#define RTC_ALRMAR_HT ((uint32_t)0x00300000)
+#define RTC_ALRMAR_HT_0 ((uint32_t)0x00100000)
+#define RTC_ALRMAR_HT_1 ((uint32_t)0x00200000)
+#define RTC_ALRMAR_HU ((uint32_t)0x000F0000)
+#define RTC_ALRMAR_HU_0 ((uint32_t)0x00010000)
+#define RTC_ALRMAR_HU_1 ((uint32_t)0x00020000)
+#define RTC_ALRMAR_HU_2 ((uint32_t)0x00040000)
+#define RTC_ALRMAR_HU_3 ((uint32_t)0x00080000)
+#define RTC_ALRMAR_MSK2 ((uint32_t)0x00008000)
+#define RTC_ALRMAR_MNT ((uint32_t)0x00007000)
+#define RTC_ALRMAR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_ALRMAR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_ALRMAR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_ALRMAR_MNU ((uint32_t)0x00000F00)
+#define RTC_ALRMAR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_ALRMAR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_ALRMAR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_ALRMAR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_ALRMAR_MSK1 ((uint32_t)0x00000080)
+#define RTC_ALRMAR_ST ((uint32_t)0x00000070)
+#define RTC_ALRMAR_ST_0 ((uint32_t)0x00000010)
+#define RTC_ALRMAR_ST_1 ((uint32_t)0x00000020)
+#define RTC_ALRMAR_ST_2 ((uint32_t)0x00000040)
+#define RTC_ALRMAR_SU ((uint32_t)0x0000000F)
+#define RTC_ALRMAR_SU_0 ((uint32_t)0x00000001)
+#define RTC_ALRMAR_SU_1 ((uint32_t)0x00000002)
+#define RTC_ALRMAR_SU_2 ((uint32_t)0x00000004)
+#define RTC_ALRMAR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_WPR register *****************/
+#define RTC_WPR_KEY ((uint32_t)0x000000FF)
+
+/******************** Bits definition for RTC_SSR register *****************/
+#define RTC_SSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_SHIFTR register **************/
+#define RTC_SHIFTR_SUBFS ((uint32_t)0x00007FFF)
+#define RTC_SHIFTR_ADD1S ((uint32_t)0x80000000)
+
+/******************** Bits definition for RTC_TSTR register ****************/
+#define RTC_TSTR_PM ((uint32_t)0x00400000)
+#define RTC_TSTR_HT ((uint32_t)0x00300000)
+#define RTC_TSTR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TSTR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TSTR_HU ((uint32_t)0x000F0000)
+#define RTC_TSTR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TSTR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TSTR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TSTR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TSTR_MNT ((uint32_t)0x00007000)
+#define RTC_TSTR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TSTR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TSTR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TSTR_MNU ((uint32_t)0x00000F00)
+#define RTC_TSTR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TSTR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TSTR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TSTR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TSTR_ST ((uint32_t)0x00000070)
+#define RTC_TSTR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TSTR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TSTR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TSTR_SU ((uint32_t)0x0000000F)
+#define RTC_TSTR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TSTR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TSTR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TSTR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSDR register ****************/
+#define RTC_TSDR_WDU ((uint32_t)0x0000E000)
+#define RTC_TSDR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_TSDR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_TSDR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_TSDR_MT ((uint32_t)0x00001000)
+#define RTC_TSDR_MU ((uint32_t)0x00000F00)
+#define RTC_TSDR_MU_0 ((uint32_t)0x00000100)
+#define RTC_TSDR_MU_1 ((uint32_t)0x00000200)
+#define RTC_TSDR_MU_2 ((uint32_t)0x00000400)
+#define RTC_TSDR_MU_3 ((uint32_t)0x00000800)
+#define RTC_TSDR_DT ((uint32_t)0x00000030)
+#define RTC_TSDR_DT_0 ((uint32_t)0x00000010)
+#define RTC_TSDR_DT_1 ((uint32_t)0x00000020)
+#define RTC_TSDR_DU ((uint32_t)0x0000000F)
+#define RTC_TSDR_DU_0 ((uint32_t)0x00000001)
+#define RTC_TSDR_DU_1 ((uint32_t)0x00000002)
+#define RTC_TSDR_DU_2 ((uint32_t)0x00000004)
+#define RTC_TSDR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSSSR register ***************/
+#define RTC_TSSSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_CALR register ****************/
+#define RTC_CALR_CALP ((uint32_t)0x00008000)
+#define RTC_CALR_CALW8 ((uint32_t)0x00004000)
+#define RTC_CALR_CALW16 ((uint32_t)0x00002000)
+#define RTC_CALR_CALM ((uint32_t)0x000001FF)
+#define RTC_CALR_CALM_0 ((uint32_t)0x00000001)
+#define RTC_CALR_CALM_1 ((uint32_t)0x00000002)
+#define RTC_CALR_CALM_2 ((uint32_t)0x00000004)
+#define RTC_CALR_CALM_3 ((uint32_t)0x00000008)
+#define RTC_CALR_CALM_4 ((uint32_t)0x00000010)
+#define RTC_CALR_CALM_5 ((uint32_t)0x00000020)
+#define RTC_CALR_CALM_6 ((uint32_t)0x00000040)
+#define RTC_CALR_CALM_7 ((uint32_t)0x00000080)
+#define RTC_CALR_CALM_8 ((uint32_t)0x00000100)
+
+/******************** Bits definition for RTC_TAFCR register ***************/
+#define RTC_TAFCR_ALARMOUTTYPE ((uint32_t)0x00040000)
+#define RTC_TAFCR_TAMPPUDIS ((uint32_t)0x00008000)
+#define RTC_TAFCR_TAMPPRCH ((uint32_t)0x00006000)
+#define RTC_TAFCR_TAMPPRCH_0 ((uint32_t)0x00002000)
+#define RTC_TAFCR_TAMPPRCH_1 ((uint32_t)0x00004000)
+#define RTC_TAFCR_TAMPFLT ((uint32_t)0x00001800)
+#define RTC_TAFCR_TAMPFLT_0 ((uint32_t)0x00000800)
+#define RTC_TAFCR_TAMPFLT_1 ((uint32_t)0x00001000)
+#define RTC_TAFCR_TAMPFREQ ((uint32_t)0x00000700)
+#define RTC_TAFCR_TAMPFREQ_0 ((uint32_t)0x00000100)
+#define RTC_TAFCR_TAMPFREQ_1 ((uint32_t)0x00000200)
+#define RTC_TAFCR_TAMPFREQ_2 ((uint32_t)0x00000400)
+#define RTC_TAFCR_TAMPTS ((uint32_t)0x00000080)
+#define RTC_TAFCR_TAMP3TRG ((uint32_t)0x00000040)
+#define RTC_TAFCR_TAMP3E ((uint32_t)0x00000020)
+#define RTC_TAFCR_TAMP2TRG ((uint32_t)0x00000010)
+#define RTC_TAFCR_TAMP2E ((uint32_t)0x00000008)
+#define RTC_TAFCR_TAMPIE ((uint32_t)0x00000004)
+#define RTC_TAFCR_TAMP1TRG ((uint32_t)0x00000002)
+#define RTC_TAFCR_TAMP1E ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_ALRMASSR register ************/
+#define RTC_ALRMASSR_MASKSS ((uint32_t)0x0F000000)
+#define RTC_ALRMASSR_MASKSS_0 ((uint32_t)0x01000000)
+#define RTC_ALRMASSR_MASKSS_1 ((uint32_t)0x02000000)
+#define RTC_ALRMASSR_MASKSS_2 ((uint32_t)0x04000000)
+#define RTC_ALRMASSR_MASKSS_3 ((uint32_t)0x08000000)
+#define RTC_ALRMASSR_SS ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_BKP0R register ***************/
+#define RTC_BKP0R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP1R register ***************/
+#define RTC_BKP1R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP2R register ***************/
+#define RTC_BKP2R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP3R register ***************/
+#define RTC_BKP3R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP4R register ***************/
+#define RTC_BKP4R ((uint32_t)0xFFFFFFFF)
+
+/******************** Number of backup registers ******************************/
+#define RTC_BKP_NUMBER ((uint32_t)0x00000005)
+
+/*****************************************************************************/
+/* */
+/* Serial Peripheral Interface (SPI) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for SPI_CR1 register *******************/
+#define SPI_CR1_CPHA ((uint32_t)0x00000001) /*!< Clock Phase */
+#define SPI_CR1_CPOL ((uint32_t)0x00000002) /*!< Clock Polarity */
+#define SPI_CR1_MSTR ((uint32_t)0x00000004) /*!< Master Selection */
+#define SPI_CR1_BR ((uint32_t)0x00000038) /*!< BR[2:0] bits (Baud Rate Control) */
+#define SPI_CR1_BR_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define SPI_CR1_BR_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define SPI_CR1_BR_2 ((uint32_t)0x00000020) /*!< Bit 2 */
+#define SPI_CR1_SPE ((uint32_t)0x00000040) /*!< SPI Enable */
+#define SPI_CR1_LSBFIRST ((uint32_t)0x00000080) /*!< Frame Format */
+#define SPI_CR1_SSI ((uint32_t)0x00000100) /*!< Internal slave select */
+#define SPI_CR1_SSM ((uint32_t)0x00000200) /*!< Software slave management */
+#define SPI_CR1_RXONLY ((uint32_t)0x00000400) /*!< Receive only */
+#define SPI_CR1_CRCL ((uint32_t)0x00000800) /*!< CRC Length */
+#define SPI_CR1_CRCNEXT ((uint32_t)0x00001000) /*!< Transmit CRC next */
+#define SPI_CR1_CRCEN ((uint32_t)0x00002000) /*!< Hardware CRC calculation enable */
+#define SPI_CR1_BIDIOE ((uint32_t)0x00004000) /*!< Output enable in bidirectional mode */
+#define SPI_CR1_BIDIMODE ((uint32_t)0x00008000) /*!< Bidirectional data mode enable */
+
+/******************* Bit definition for SPI_CR2 register *******************/
+#define SPI_CR2_RXDMAEN ((uint32_t)0x00000001) /*!< Rx Buffer DMA Enable */
+#define SPI_CR2_TXDMAEN ((uint32_t)0x00000002) /*!< Tx Buffer DMA Enable */
+#define SPI_CR2_SSOE ((uint32_t)0x00000004) /*!< SS Output Enable */
+#define SPI_CR2_NSSP ((uint32_t)0x00000008) /*!< NSS pulse management Enable */
+#define SPI_CR2_FRF ((uint32_t)0x00000010) /*!< Frame Format Enable */
+#define SPI_CR2_ERRIE ((uint32_t)0x00000020) /*!< Error Interrupt Enable */
+#define SPI_CR2_RXNEIE ((uint32_t)0x00000040) /*!< RX buffer Not Empty Interrupt Enable */
+#define SPI_CR2_TXEIE ((uint32_t)0x00000080) /*!< Tx buffer Empty Interrupt Enable */
+#define SPI_CR2_DS ((uint32_t)0x00000F00) /*!< DS[3:0] Data Size */
+#define SPI_CR2_DS_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define SPI_CR2_DS_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define SPI_CR2_DS_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define SPI_CR2_DS_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+#define SPI_CR2_FRXTH ((uint32_t)0x00001000) /*!< FIFO reception Threshold */
+#define SPI_CR2_LDMARX ((uint32_t)0x00002000) /*!< Last DMA transfer for reception */
+#define SPI_CR2_LDMATX ((uint32_t)0x00004000) /*!< Last DMA transfer for transmission */
+
+/******************** Bit definition for SPI_SR register *******************/
+#define SPI_SR_RXNE ((uint32_t)0x00000001) /*!< Receive buffer Not Empty */
+#define SPI_SR_TXE ((uint32_t)0x00000002) /*!< Transmit buffer Empty */
+#define SPI_SR_CHSIDE ((uint32_t)0x00000004) /*!< Channel side */
+#define SPI_SR_UDR ((uint32_t)0x00000008) /*!< Underrun flag */
+#define SPI_SR_CRCERR ((uint32_t)0x00000010) /*!< CRC Error flag */
+#define SPI_SR_MODF ((uint32_t)0x00000020) /*!< Mode fault */
+#define SPI_SR_OVR ((uint32_t)0x00000040) /*!< Overrun flag */
+#define SPI_SR_BSY ((uint32_t)0x00000080) /*!< Busy flag */
+#define SPI_SR_FRE ((uint32_t)0x00000100) /*!< TI frame format error */
+#define SPI_SR_FRLVL ((uint32_t)0x00000600) /*!< FIFO Reception Level */
+#define SPI_SR_FRLVL_0 ((uint32_t)0x00000200) /*!< Bit 0 */
+#define SPI_SR_FRLVL_1 ((uint32_t)0x00000400) /*!< Bit 1 */
+#define SPI_SR_FTLVL ((uint32_t)0x00001800) /*!< FIFO Transmission Level */
+#define SPI_SR_FTLVL_0 ((uint32_t)0x00000800) /*!< Bit 0 */
+#define SPI_SR_FTLVL_1 ((uint32_t)0x00001000) /*!< Bit 1 */
+
+/******************** Bit definition for SPI_DR register *******************/
+#define SPI_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data Register */
+
+/******************* Bit definition for SPI_CRCPR register *****************/
+#define SPI_CRCPR_CRCPOLY ((uint32_t)0xFFFFFFFF) /*!< CRC polynomial register */
+
+/****************** Bit definition for SPI_RXCRCR register *****************/
+#define SPI_RXCRCR_RXCRC ((uint32_t)0xFFFFFFFF) /*!< Rx CRC Register */
+
+/****************** Bit definition for SPI_TXCRCR register *****************/
+#define SPI_TXCRCR_TXCRC ((uint32_t)0xFFFFFFFF) /*!< Tx CRC Register */
+
+/****************** Bit definition for SPI_I2SCFGR register ****************/
+#define SPI_I2SCFGR_CHLEN ((uint32_t)0x00000001) /*!<Channel length (number of bits per audio channel) */
+#define SPI_I2SCFGR_DATLEN ((uint32_t)0x00000006) /*!<DATLEN[1:0] bits (Data length to be transferred) */
+#define SPI_I2SCFGR_DATLEN_0 ((uint32_t)0x00000002) /*!<Bit 0 */
+#define SPI_I2SCFGR_DATLEN_1 ((uint32_t)0x00000004) /*!<Bit 1 */
+#define SPI_I2SCFGR_CKPOL ((uint32_t)0x00000008) /*!<steady state clock polarity */
+#define SPI_I2SCFGR_I2SSTD ((uint32_t)0x00000030) /*!<I2SSTD[1:0] bits (I2S standard selection) */
+#define SPI_I2SCFGR_I2SSTD_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SSTD_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define SPI_I2SCFGR_PCMSYNC ((uint32_t)0x00000080) /*!<PCM frame synchronization */
+#define SPI_I2SCFGR_I2SCFG ((uint32_t)0x00000300) /*!<I2SCFG[1:0] bits (I2S configuration mode) */
+#define SPI_I2SCFGR_I2SCFG_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SCFG_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define SPI_I2SCFGR_I2SE ((uint32_t)0x00000400) /*!<I2S Enable */
+#define SPI_I2SCFGR_I2SMOD ((uint32_t)0x00000800) /*!<I2S mode selection */
+
+/****************** Bit definition for SPI_I2SPR register ******************/
+#define SPI_I2SPR_I2SDIV ((uint32_t)0x000000FF) /*!<I2S Linear prescaler */
+#define SPI_I2SPR_ODD ((uint32_t)0x00000100) /*!<Odd factor for the prescaler */
+#define SPI_I2SPR_MCKOE ((uint32_t)0x00000200) /*!<Master Clock Output Enable */
+
+/*****************************************************************************/
+/* */
+/* System Configuration (SYSCFG) */
+/* */
+/*****************************************************************************/
+/***************** Bit definition for SYSCFG_CFGR1 register ****************/
+#define SYSCFG_CFGR1_MEM_MODE ((uint32_t)0x00000003) /*!< SYSCFG_Memory Remap Config */
+#define SYSCFG_CFGR1_MEM_MODE_0 ((uint32_t)0x00000001) /*!< SYSCFG_Memory Remap Config Bit 0 */
+#define SYSCFG_CFGR1_MEM_MODE_1 ((uint32_t)0x00000002) /*!< SYSCFG_Memory Remap Config Bit 1 */
+
+#define SYSCFG_CFGR1_DMA_RMP ((uint32_t)0x7F007F00) /*!< DMA remap mask */
+#define SYSCFG_CFGR1_ADC_DMA_RMP ((uint32_t)0x00000100) /*!< ADC DMA remap */
+#define SYSCFG_CFGR1_USART1TX_DMA_RMP ((uint32_t)0x00000200) /*!< USART1 TX DMA remap */
+#define SYSCFG_CFGR1_USART1RX_DMA_RMP ((uint32_t)0x00000400) /*!< USART1 RX DMA remap */
+#define SYSCFG_CFGR1_TIM16_DMA_RMP ((uint32_t)0x00000800) /*!< Timer 16 DMA remap */
+#define SYSCFG_CFGR1_TIM17_DMA_RMP ((uint32_t)0x00001000) /*!< Timer 17 DMA remap */
+#define SYSCFG_CFGR1_TIM16_DMA_RMP2 ((uint32_t)0x00002000) /*!< Timer 16 DMA remap 2 */
+#define SYSCFG_CFGR1_TIM17_DMA_RMP2 ((uint32_t)0x00004000) /*!< Timer 17 DMA remap 2 */
+#define SYSCFG_CFGR1_SPI2_DMA_RMP ((uint32_t)0x01000000) /*!< SPI2 DMA remap */
+#define SYSCFG_CFGR1_USART2_DMA_RMP ((uint32_t)0x02000000) /*!< USART2 DMA remap */
+#define SYSCFG_CFGR1_USART3_DMA_RMP ((uint32_t)0x04000000) /*!< USART3 DMA remap */
+#define SYSCFG_CFGR1_I2C1_DMA_RMP ((uint32_t)0x08000000) /*!< I2C1 DMA remap */
+#define SYSCFG_CFGR1_TIM1_DMA_RMP ((uint32_t)0x10000000) /*!< TIM1 DMA remap */
+#define SYSCFG_CFGR1_TIM2_DMA_RMP ((uint32_t)0x20000000) /*!< TIM2 DMA remap */
+#define SYSCFG_CFGR1_TIM3_DMA_RMP ((uint32_t)0x40000000) /*!< TIM3 DMA remap */
+
+#define SYSCFG_CFGR1_I2C_FMP_PB6 ((uint32_t)0x00010000) /*!< I2C PB6 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB7 ((uint32_t)0x00020000) /*!< I2C PB7 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB8 ((uint32_t)0x00040000) /*!< I2C PB8 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB9 ((uint32_t)0x00080000) /*!< I2C PB9 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_I2C1 ((uint32_t)0x00100000) /*!< Enable Fast Mode Plus on PB10, PB11, PF6 and PF7 */
+#define SYSCFG_CFGR1_I2C_FMP_I2C2 ((uint32_t)0x00200000) /*!< Enable I2C2 Fast mode plus */
+
+/***************** Bit definition for SYSCFG_EXTICR1 register **************/
+#define SYSCFG_EXTICR1_EXTI0 ((uint16_t)0x000F) /*!< EXTI 0 configuration */
+#define SYSCFG_EXTICR1_EXTI1 ((uint16_t)0x00F0) /*!< EXTI 1 configuration */
+#define SYSCFG_EXTICR1_EXTI2 ((uint16_t)0x0F00) /*!< EXTI 2 configuration */
+#define SYSCFG_EXTICR1_EXTI3 ((uint16_t)0xF000) /*!< EXTI 3 configuration */
+
+/**
+ * @brief EXTI0 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI0_PA ((uint16_t)0x0000) /*!< PA[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PB ((uint16_t)0x0001) /*!< PB[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PC ((uint16_t)0x0002) /*!< PC[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PD ((uint16_t)0x0003) /*!< PD[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PE ((uint16_t)0x0004) /*!< PE[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PF ((uint16_t)0x0005) /*!< PF[0] pin */
+
+/**
+ * @brief EXTI1 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI1_PA ((uint16_t)0x0000) /*!< PA[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PB ((uint16_t)0x0010) /*!< PB[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PC ((uint16_t)0x0020) /*!< PC[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PD ((uint16_t)0x0030) /*!< PD[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PE ((uint16_t)0x0040) /*!< PE[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PF ((uint16_t)0x0050) /*!< PF[1] pin */
+
+/**
+ * @brief EXTI2 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI2_PA ((uint16_t)0x0000) /*!< PA[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PB ((uint16_t)0x0100) /*!< PB[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PC ((uint16_t)0x0200) /*!< PC[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PD ((uint16_t)0x0300) /*!< PD[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PE ((uint16_t)0x0400) /*!< PE[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PF ((uint16_t)0x0500) /*!< PF[2] pin */
+
+/**
+ * @brief EXTI3 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI3_PA ((uint16_t)0x0000) /*!< PA[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PB ((uint16_t)0x1000) /*!< PB[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PC ((uint16_t)0x2000) /*!< PC[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PD ((uint16_t)0x3000) /*!< PD[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PE ((uint16_t)0x4000) /*!< PE[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PF ((uint16_t)0x5000) /*!< PF[3] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR2 register **************/
+#define SYSCFG_EXTICR2_EXTI4 ((uint16_t)0x000F) /*!< EXTI 4 configuration */
+#define SYSCFG_EXTICR2_EXTI5 ((uint16_t)0x00F0) /*!< EXTI 5 configuration */
+#define SYSCFG_EXTICR2_EXTI6 ((uint16_t)0x0F00) /*!< EXTI 6 configuration */
+#define SYSCFG_EXTICR2_EXTI7 ((uint16_t)0xF000) /*!< EXTI 7 configuration */
+
+/**
+ * @brief EXTI4 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI4_PA ((uint16_t)0x0000) /*!< PA[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PB ((uint16_t)0x0001) /*!< PB[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PC ((uint16_t)0x0002) /*!< PC[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PD ((uint16_t)0x0003) /*!< PD[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PE ((uint16_t)0x0004) /*!< PE[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PF ((uint16_t)0x0005) /*!< PF[4] pin */
+
+/**
+ * @brief EXTI5 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI5_PA ((uint16_t)0x0000) /*!< PA[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PB ((uint16_t)0x0010) /*!< PB[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PC ((uint16_t)0x0020) /*!< PC[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PD ((uint16_t)0x0030) /*!< PD[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PE ((uint16_t)0x0040) /*!< PE[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PF ((uint16_t)0x0050) /*!< PF[5] pin */
+
+/**
+ * @brief EXTI6 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI6_PA ((uint16_t)0x0000) /*!< PA[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PB ((uint16_t)0x0100) /*!< PB[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PC ((uint16_t)0x0200) /*!< PC[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PD ((uint16_t)0x0300) /*!< PD[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PE ((uint16_t)0x0400) /*!< PE[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PF ((uint16_t)0x0500) /*!< PF[6] pin */
+
+/**
+ * @brief EXTI7 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI7_PA ((uint16_t)0x0000) /*!< PA[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PB ((uint16_t)0x1000) /*!< PB[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PC ((uint16_t)0x2000) /*!< PC[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PD ((uint16_t)0x3000) /*!< PD[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PE ((uint16_t)0x4000) /*!< PE[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PF ((uint16_t)0x5000) /*!< PF[7] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR3 register **************/
+#define SYSCFG_EXTICR3_EXTI8 ((uint16_t)0x000F) /*!< EXTI 8 configuration */
+#define SYSCFG_EXTICR3_EXTI9 ((uint16_t)0x00F0) /*!< EXTI 9 configuration */
+#define SYSCFG_EXTICR3_EXTI10 ((uint16_t)0x0F00) /*!< EXTI 10 configuration */
+#define SYSCFG_EXTICR3_EXTI11 ((uint16_t)0xF000) /*!< EXTI 11 configuration */
+
+/**
+ * @brief EXTI8 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI8_PA ((uint16_t)0x0000) /*!< PA[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PB ((uint16_t)0x0001) /*!< PB[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PC ((uint16_t)0x0002) /*!< PC[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PD ((uint16_t)0x0003) /*!< PD[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PE ((uint16_t)0x0004) /*!< PE[8] pin */
+
+/**
+ * @brief EXTI9 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI9_PA ((uint16_t)0x0000) /*!< PA[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PB ((uint16_t)0x0010) /*!< PB[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PC ((uint16_t)0x0020) /*!< PC[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PD ((uint16_t)0x0030) /*!< PD[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PE ((uint16_t)0x0040) /*!< PE[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PF ((uint16_t)0x0050) /*!< PF[9] pin */
+
+/**
+ * @brief EXTI10 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI10_PA ((uint16_t)0x0000) /*!< PA[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PB ((uint16_t)0x0100) /*!< PB[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PC ((uint16_t)0x0200) /*!< PC[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PD ((uint16_t)0x0300) /*!< PE[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PE ((uint16_t)0x0400) /*!< PD[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PF ((uint16_t)0x0500) /*!< PF[10] pin */
+
+/**
+ * @brief EXTI11 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI11_PA ((uint16_t)0x0000) /*!< PA[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PB ((uint16_t)0x1000) /*!< PB[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PC ((uint16_t)0x2000) /*!< PC[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PD ((uint16_t)0x3000) /*!< PD[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PE ((uint16_t)0x4000) /*!< PE[11] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR4 register **************/
+#define SYSCFG_EXTICR4_EXTI12 ((uint16_t)0x000F) /*!< EXTI 12 configuration */
+#define SYSCFG_EXTICR4_EXTI13 ((uint16_t)0x00F0) /*!< EXTI 13 configuration */
+#define SYSCFG_EXTICR4_EXTI14 ((uint16_t)0x0F00) /*!< EXTI 14 configuration */
+#define SYSCFG_EXTICR4_EXTI15 ((uint16_t)0xF000) /*!< EXTI 15 configuration */
+
+/**
+ * @brief EXTI12 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI12_PA ((uint16_t)0x0000) /*!< PA[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PB ((uint16_t)0x0001) /*!< PB[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PC ((uint16_t)0x0002) /*!< PC[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PD ((uint16_t)0x0003) /*!< PD[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PE ((uint16_t)0x0004) /*!< PE[12] pin */
+
+/**
+ * @brief EXTI13 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI13_PA ((uint16_t)0x0000) /*!< PA[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PB ((uint16_t)0x0010) /*!< PB[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PC ((uint16_t)0x0020) /*!< PC[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PD ((uint16_t)0x0030) /*!< PD[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PE ((uint16_t)0x0040) /*!< PE[13] pin */
+
+/**
+ * @brief EXTI14 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI14_PA ((uint16_t)0x0000) /*!< PA[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PB ((uint16_t)0x0100) /*!< PB[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PC ((uint16_t)0x0200) /*!< PC[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PD ((uint16_t)0x0300) /*!< PD[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PE ((uint16_t)0x0400) /*!< PE[14] pin */
+
+/**
+ * @brief EXTI15 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI15_PA ((uint16_t)0x0000) /*!< PA[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PB ((uint16_t)0x1000) /*!< PB[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PC ((uint16_t)0x2000) /*!< PC[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PD ((uint16_t)0x3000) /*!< PD[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PE ((uint16_t)0x4000) /*!< PE[15] pin */
+
+/***************** Bit definition for SYSCFG_CFGR2 register ****************/
+#define SYSCFG_CFGR2_LOCKUP_LOCK ((uint32_t)0x00000001) /*!< Enables and locks the LOCKUP (Hardfault) output of CortexM0 with Break Input of TIMER1 */
+#define SYSCFG_CFGR2_SRAM_PARITY_LOCK ((uint32_t)0x00000002) /*!< Enables and locks the SRAM_PARITY error signal with Break Input of TIMER1 */
+#define SYSCFG_CFGR2_PVD_LOCK ((uint32_t)0x00000004) /*!< Enables and locks the PVD connection with Timer1 Break Input and also the PVD_EN and PVDSEL[2:0] bits of the Power Control Interface */
+#define SYSCFG_CFGR2_SRAM_PEF ((uint32_t)0x00000100) /*!< SRAM Parity error flag */
+#define SYSCFG_CFGR2_SRAM_PE SYSCFG_CFGR2_SRAM_PEF /*!< SRAM Parity error flag (define maintained for legacy purpose) */
+
+/*****************************************************************************/
+/* */
+/* Timers (TIM) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for TIM_CR1 register *******************/
+#define TIM_CR1_CEN ((uint32_t)0x00000001) /*!<Counter enable */
+#define TIM_CR1_UDIS ((uint32_t)0x00000002) /*!<Update disable */
+#define TIM_CR1_URS ((uint32_t)0x00000004) /*!<Update request source */
+#define TIM_CR1_OPM ((uint32_t)0x00000008) /*!<One pulse mode */
+#define TIM_CR1_DIR ((uint32_t)0x00000010) /*!<Direction */
+
+#define TIM_CR1_CMS ((uint32_t)0x00000060) /*!<CMS[1:0] bits (Center-aligned mode selection) */
+#define TIM_CR1_CMS_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define TIM_CR1_CMS_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+
+#define TIM_CR1_ARPE ((uint32_t)0x00000080) /*!<Auto-reload preload enable */
+
+#define TIM_CR1_CKD ((uint32_t)0x00000300) /*!<CKD[1:0] bits (clock division) */
+#define TIM_CR1_CKD_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CR1_CKD_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+/******************* Bit definition for TIM_CR2 register *******************/
+#define TIM_CR2_CCPC ((uint32_t)0x00000001) /*!<Capture/Compare Preloaded Control */
+#define TIM_CR2_CCUS ((uint32_t)0x00000004) /*!<Capture/Compare Control Update Selection */
+#define TIM_CR2_CCDS ((uint32_t)0x00000008) /*!<Capture/Compare DMA Selection */
+
+#define TIM_CR2_MMS ((uint32_t)0x00000070) /*!<MMS[2:0] bits (Master Mode Selection) */
+#define TIM_CR2_MMS_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CR2_MMS_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CR2_MMS_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CR2_TI1S ((uint32_t)0x00000080) /*!<TI1 Selection */
+#define TIM_CR2_OIS1 ((uint32_t)0x00000100) /*!<Output Idle state 1 (OC1 output) */
+#define TIM_CR2_OIS1N ((uint32_t)0x00000200) /*!<Output Idle state 1 (OC1N output) */
+#define TIM_CR2_OIS2 ((uint32_t)0x00000400) /*!<Output Idle state 2 (OC2 output) */
+#define TIM_CR2_OIS2N ((uint32_t)0x00000800) /*!<Output Idle state 2 (OC2N output) */
+#define TIM_CR2_OIS3 ((uint32_t)0x00001000) /*!<Output Idle state 3 (OC3 output) */
+#define TIM_CR2_OIS3N ((uint32_t)0x00002000) /*!<Output Idle state 3 (OC3N output) */
+#define TIM_CR2_OIS4 ((uint32_t)0x00004000) /*!<Output Idle state 4 (OC4 output) */
+
+/******************* Bit definition for TIM_SMCR register ******************/
+#define TIM_SMCR_SMS ((uint32_t)0x00000007) /*!<SMS[2:0] bits (Slave mode selection) */
+#define TIM_SMCR_SMS_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_SMCR_SMS_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_SMCR_SMS_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+
+#define TIM_SMCR_OCCS ((uint32_t)0x00000008) /*!< OCREF clear selection */
+
+#define TIM_SMCR_TS ((uint32_t)0x00000070) /*!<TS[2:0] bits (Trigger selection) */
+#define TIM_SMCR_TS_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_SMCR_TS_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_SMCR_TS_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_SMCR_MSM ((uint32_t)0x00000080) /*!<Master/slave mode */
+
+#define TIM_SMCR_ETF ((uint32_t)0x00000F00) /*!<ETF[3:0] bits (External trigger filter) */
+#define TIM_SMCR_ETF_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_SMCR_ETF_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define TIM_SMCR_ETF_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define TIM_SMCR_ETF_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+
+#define TIM_SMCR_ETPS ((uint32_t)0x00003000) /*!<ETPS[1:0] bits (External trigger prescaler) */
+#define TIM_SMCR_ETPS_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_SMCR_ETPS_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+
+#define TIM_SMCR_ECE ((uint32_t)0x00004000) /*!<External clock enable */
+#define TIM_SMCR_ETP ((uint32_t)0x00008000) /*!<External trigger polarity */
+
+/******************* Bit definition for TIM_DIER register ******************/
+#define TIM_DIER_UIE ((uint32_t)0x00000001) /*!<Update interrupt enable */
+#define TIM_DIER_CC1IE ((uint32_t)0x00000002) /*!<Capture/Compare 1 interrupt enable */
+#define TIM_DIER_CC2IE ((uint32_t)0x00000004) /*!<Capture/Compare 2 interrupt enable */
+#define TIM_DIER_CC3IE ((uint32_t)0x00000008) /*!<Capture/Compare 3 interrupt enable */
+#define TIM_DIER_CC4IE ((uint32_t)0x00000010) /*!<Capture/Compare 4 interrupt enable */
+#define TIM_DIER_COMIE ((uint32_t)0x00000020) /*!<COM interrupt enable */
+#define TIM_DIER_TIE ((uint32_t)0x00000040) /*!<Trigger interrupt enable */
+#define TIM_DIER_BIE ((uint32_t)0x00000080) /*!<Break interrupt enable */
+#define TIM_DIER_UDE ((uint32_t)0x00000100) /*!<Update DMA request enable */
+#define TIM_DIER_CC1DE ((uint32_t)0x00000200) /*!<Capture/Compare 1 DMA request enable */
+#define TIM_DIER_CC2DE ((uint32_t)0x00000400) /*!<Capture/Compare 2 DMA request enable */
+#define TIM_DIER_CC3DE ((uint32_t)0x00000800) /*!<Capture/Compare 3 DMA request enable */
+#define TIM_DIER_CC4DE ((uint32_t)0x00001000) /*!<Capture/Compare 4 DMA request enable */
+#define TIM_DIER_COMDE ((uint32_t)0x00002000) /*!<COM DMA request enable */
+#define TIM_DIER_TDE ((uint32_t)0x00004000) /*!<Trigger DMA request enable */
+
+/******************** Bit definition for TIM_SR register *******************/
+#define TIM_SR_UIF ((uint32_t)0x00000001) /*!<Update interrupt Flag */
+#define TIM_SR_CC1IF ((uint32_t)0x00000002) /*!<Capture/Compare 1 interrupt Flag */
+#define TIM_SR_CC2IF ((uint32_t)0x00000004) /*!<Capture/Compare 2 interrupt Flag */
+#define TIM_SR_CC3IF ((uint32_t)0x00000008) /*!<Capture/Compare 3 interrupt Flag */
+#define TIM_SR_CC4IF ((uint32_t)0x00000010) /*!<Capture/Compare 4 interrupt Flag */
+#define TIM_SR_COMIF ((uint32_t)0x00000020) /*!<COM interrupt Flag */
+#define TIM_SR_TIF ((uint32_t)0x00000040) /*!<Trigger interrupt Flag */
+#define TIM_SR_BIF ((uint32_t)0x00000080) /*!<Break interrupt Flag */
+#define TIM_SR_CC1OF ((uint32_t)0x00000200) /*!<Capture/Compare 1 Overcapture Flag */
+#define TIM_SR_CC2OF ((uint32_t)0x00000400) /*!<Capture/Compare 2 Overcapture Flag */
+#define TIM_SR_CC3OF ((uint32_t)0x00000800) /*!<Capture/Compare 3 Overcapture Flag */
+#define TIM_SR_CC4OF ((uint32_t)0x00001000) /*!<Capture/Compare 4 Overcapture Flag */
+
+/******************* Bit definition for TIM_EGR register *******************/
+#define TIM_EGR_UG ((uint32_t)0x00000001) /*!<Update Generation */
+#define TIM_EGR_CC1G ((uint32_t)0x00000002) /*!<Capture/Compare 1 Generation */
+#define TIM_EGR_CC2G ((uint32_t)0x00000004) /*!<Capture/Compare 2 Generation */
+#define TIM_EGR_CC3G ((uint32_t)0x00000008) /*!<Capture/Compare 3 Generation */
+#define TIM_EGR_CC4G ((uint32_t)0x00000010) /*!<Capture/Compare 4 Generation */
+#define TIM_EGR_COMG ((uint32_t)0x00000020) /*!<Capture/Compare Control Update Generation */
+#define TIM_EGR_TG ((uint32_t)0x00000040) /*!<Trigger Generation */
+#define TIM_EGR_BG ((uint32_t)0x00000080) /*!<Break Generation */
+
+/****************** Bit definition for TIM_CCMR1 register ******************/
+#define TIM_CCMR1_CC1S ((uint32_t)0x00000003) /*!<CC1S[1:0] bits (Capture/Compare 1 Selection) */
+#define TIM_CCMR1_CC1S_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_CCMR1_CC1S_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC1FE ((uint32_t)0x00000004) /*!<Output Compare 1 Fast enable */
+#define TIM_CCMR1_OC1PE ((uint32_t)0x00000008) /*!<Output Compare 1 Preload enable */
+
+#define TIM_CCMR1_OC1M ((uint32_t)0x00000070) /*!<OC1M[2:0] bits (Output Compare 1 Mode) */
+#define TIM_CCMR1_OC1M_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR1_OC1M_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR1_OC1M_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CCMR1_OC1CE ((uint32_t)0x00000080) /*!<Output Compare 1Clear Enable */
+
+#define TIM_CCMR1_CC2S ((uint32_t)0x00000300) /*!<CC2S[1:0] bits (Capture/Compare 2 Selection) */
+#define TIM_CCMR1_CC2S_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CCMR1_CC2S_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC2FE ((uint32_t)0x00000400) /*!<Output Compare 2 Fast enable */
+#define TIM_CCMR1_OC2PE ((uint32_t)0x00000800) /*!<Output Compare 2 Preload enable */
+
+#define TIM_CCMR1_OC2M ((uint32_t)0x00007000) /*!<OC2M[2:0] bits (Output Compare 2 Mode) */
+#define TIM_CCMR1_OC2M_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR1_OC2M_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR1_OC2M_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+
+#define TIM_CCMR1_OC2CE ((uint32_t)0x00008000) /*!<Output Compare 2 Clear Enable */
+
+/*---------------------------------------------------------------------------*/
+
+#define TIM_CCMR1_IC1PSC ((uint32_t)0x0000000C) /*!<IC1PSC[1:0] bits (Input Capture 1 Prescaler) */
+#define TIM_CCMR1_IC1PSC_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define TIM_CCMR1_IC1PSC_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC1F ((uint32_t)0x000000F0) /*!<IC1F[3:0] bits (Input Capture 1 Filter) */
+#define TIM_CCMR1_IC1F_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR1_IC1F_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR1_IC1F_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define TIM_CCMR1_IC1F_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define TIM_CCMR1_IC2PSC ((uint32_t)0x00000C00) /*!<IC2PSC[1:0] bits (Input Capture 2 Prescaler) */
+#define TIM_CCMR1_IC2PSC_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define TIM_CCMR1_IC2PSC_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC2F ((uint32_t)0x0000F000) /*!<IC2F[3:0] bits (Input Capture 2 Filter) */
+#define TIM_CCMR1_IC2F_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR1_IC2F_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR1_IC2F_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define TIM_CCMR1_IC2F_3 ((uint32_t)0x00008000) /*!<Bit 3 */
+
+/****************** Bit definition for TIM_CCMR2 register ******************/
+#define TIM_CCMR2_CC3S ((uint32_t)0x00000003) /*!<CC3S[1:0] bits (Capture/Compare 3 Selection) */
+#define TIM_CCMR2_CC3S_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_CCMR2_CC3S_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC3FE ((uint32_t)0x00000004) /*!<Output Compare 3 Fast enable */
+#define TIM_CCMR2_OC3PE ((uint32_t)0x00000008) /*!<Output Compare 3 Preload enable */
+
+#define TIM_CCMR2_OC3M ((uint32_t)0x00000070) /*!<OC3M[2:0] bits (Output Compare 3 Mode) */
+#define TIM_CCMR2_OC3M_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR2_OC3M_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR2_OC3M_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CCMR2_OC3CE ((uint32_t)0x00000080) /*!<Output Compare 3 Clear Enable */
+
+#define TIM_CCMR2_CC4S ((uint32_t)0x00000300) /*!<CC4S[1:0] bits (Capture/Compare 4 Selection) */
+#define TIM_CCMR2_CC4S_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CCMR2_CC4S_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC4FE ((uint32_t)0x00000400) /*!<Output Compare 4 Fast enable */
+#define TIM_CCMR2_OC4PE ((uint32_t)0x00000800) /*!<Output Compare 4 Preload enable */
+
+#define TIM_CCMR2_OC4M ((uint32_t)0x00007000) /*!<OC4M[2:0] bits (Output Compare 4 Mode) */
+#define TIM_CCMR2_OC4M_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR2_OC4M_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR2_OC4M_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+
+#define TIM_CCMR2_OC4CE ((uint32_t)0x00008000) /*!<Output Compare 4 Clear Enable */
+
+/*---------------------------------------------------------------------------*/
+
+#define TIM_CCMR2_IC3PSC ((uint32_t)0x0000000C) /*!<IC3PSC[1:0] bits (Input Capture 3 Prescaler) */
+#define TIM_CCMR2_IC3PSC_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define TIM_CCMR2_IC3PSC_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC3F ((uint32_t)0x000000F0) /*!<IC3F[3:0] bits (Input Capture 3 Filter) */
+#define TIM_CCMR2_IC3F_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR2_IC3F_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR2_IC3F_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define TIM_CCMR2_IC3F_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define TIM_CCMR2_IC4PSC ((uint32_t)0x00000C00) /*!<IC4PSC[1:0] bits (Input Capture 4 Prescaler) */
+#define TIM_CCMR2_IC4PSC_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define TIM_CCMR2_IC4PSC_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC4F ((uint32_t)0x0000F000) /*!<IC4F[3:0] bits (Input Capture 4 Filter) */
+#define TIM_CCMR2_IC4F_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR2_IC4F_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR2_IC4F_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define TIM_CCMR2_IC4F_3 ((uint32_t)0x00008000) /*!<Bit 3 */
+
+/******************* Bit definition for TIM_CCER register ******************/
+#define TIM_CCER_CC1E ((uint32_t)0x00000001) /*!<Capture/Compare 1 output enable */
+#define TIM_CCER_CC1P ((uint32_t)0x00000002) /*!<Capture/Compare 1 output Polarity */
+#define TIM_CCER_CC1NE ((uint32_t)0x00000004) /*!<Capture/Compare 1 Complementary output enable */
+#define TIM_CCER_CC1NP ((uint32_t)0x00000008) /*!<Capture/Compare 1 Complementary output Polarity */
+#define TIM_CCER_CC2E ((uint32_t)0x00000010) /*!<Capture/Compare 2 output enable */
+#define TIM_CCER_CC2P ((uint32_t)0x00000020) /*!<Capture/Compare 2 output Polarity */
+#define TIM_CCER_CC2NE ((uint32_t)0x00000040) /*!<Capture/Compare 2 Complementary output enable */
+#define TIM_CCER_CC2NP ((uint32_t)0x00000080) /*!<Capture/Compare 2 Complementary output Polarity */
+#define TIM_CCER_CC3E ((uint32_t)0x00000100) /*!<Capture/Compare 3 output enable */
+#define TIM_CCER_CC3P ((uint32_t)0x00000200) /*!<Capture/Compare 3 output Polarity */
+#define TIM_CCER_CC3NE ((uint32_t)0x00000400) /*!<Capture/Compare 3 Complementary output enable */
+#define TIM_CCER_CC3NP ((uint32_t)0x00000800) /*!<Capture/Compare 3 Complementary output Polarity */
+#define TIM_CCER_CC4E ((uint32_t)0x00001000) /*!<Capture/Compare 4 output enable */
+#define TIM_CCER_CC4P ((uint32_t)0x00002000) /*!<Capture/Compare 4 output Polarity */
+#define TIM_CCER_CC4NP ((uint32_t)0x00008000) /*!<Capture/Compare 4 Complementary output Polarity */
+
+/******************* Bit definition for TIM_CNT register *******************/
+#define TIM_CNT_CNT ((uint32_t)0xFFFFFFFF) /*!<Counter Value */
+
+/******************* Bit definition for TIM_PSC register *******************/
+#define TIM_PSC_PSC ((uint32_t)0x0000FFFF) /*!<Prescaler Value */
+
+/******************* Bit definition for TIM_ARR register *******************/
+#define TIM_ARR_ARR ((uint32_t)0xFFFFFFFF) /*!<actual auto-reload Value */
+
+/******************* Bit definition for TIM_RCR register *******************/
+#define TIM_RCR_REP ((uint32_t)0x000000FF) /*!<Repetition Counter Value */
+
+/******************* Bit definition for TIM_CCR1 register ******************/
+#define TIM_CCR1_CCR1 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 1 Value */
+
+/******************* Bit definition for TIM_CCR2 register ******************/
+#define TIM_CCR2_CCR2 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 2 Value */
+
+/******************* Bit definition for TIM_CCR3 register ******************/
+#define TIM_CCR3_CCR3 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 3 Value */
+
+/******************* Bit definition for TIM_CCR4 register ******************/
+#define TIM_CCR4_CCR4 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 4 Value */
+
+/******************* Bit definition for TIM_BDTR register ******************/
+#define TIM_BDTR_DTG ((uint32_t)0x000000FF) /*!<DTG[0:7] bits (Dead-Time Generator set-up) */
+#define TIM_BDTR_DTG_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_BDTR_DTG_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_BDTR_DTG_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define TIM_BDTR_DTG_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define TIM_BDTR_DTG_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define TIM_BDTR_DTG_5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define TIM_BDTR_DTG_6 ((uint32_t)0x00000040) /*!<Bit 6 */
+#define TIM_BDTR_DTG_7 ((uint32_t)0x00000080) /*!<Bit 7 */
+
+#define TIM_BDTR_LOCK ((uint32_t)0x00000300) /*!<LOCK[1:0] bits (Lock Configuration) */
+#define TIM_BDTR_LOCK_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_BDTR_LOCK_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_BDTR_OSSI ((uint32_t)0x00000400) /*!<Off-State Selection for Idle mode */
+#define TIM_BDTR_OSSR ((uint32_t)0x00000800) /*!<Off-State Selection for Run mode */
+#define TIM_BDTR_BKE ((uint32_t)0x00001000) /*!<Break enable */
+#define TIM_BDTR_BKP ((uint32_t)0x00002000) /*!<Break Polarity */
+#define TIM_BDTR_AOE ((uint32_t)0x00004000) /*!<Automatic Output enable */
+#define TIM_BDTR_MOE ((uint32_t)0x00008000) /*!<Main Output enable */
+
+/******************* Bit definition for TIM_DCR register *******************/
+#define TIM_DCR_DBA ((uint32_t)0x0000001F) /*!<DBA[4:0] bits (DMA Base Address) */
+#define TIM_DCR_DBA_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_DCR_DBA_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_DCR_DBA_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define TIM_DCR_DBA_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define TIM_DCR_DBA_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+
+#define TIM_DCR_DBL ((uint32_t)0x00001F00) /*!<DBL[4:0] bits (DMA Burst Length) */
+#define TIM_DCR_DBL_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_DCR_DBL_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define TIM_DCR_DBL_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define TIM_DCR_DBL_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define TIM_DCR_DBL_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+
+/******************* Bit definition for TIM_DMAR register ******************/
+#define TIM_DMAR_DMAB ((uint32_t)0x0000FFFF) /*!<DMA register for burst accesses */
+
+/******************* Bit definition for TIM14_OR register ********************/
+#define TIM14_OR_TI1_RMP ((uint32_t)0x00000003) /*!<TI1_RMP[1:0] bits (TIM14 Input 4 remap) */
+#define TIM14_OR_TI1_RMP_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM14_OR_TI1_RMP_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+/******************************************************************************/
+/* */
+/* Touch Sensing Controller (TSC) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for TSC_CR register *********************/
+#define TSC_CR_TSCE ((uint32_t)0x00000001) /*!<Touch sensing controller enable */
+#define TSC_CR_START ((uint32_t)0x00000002) /*!<Start acquisition */
+#define TSC_CR_AM ((uint32_t)0x00000004) /*!<Acquisition mode */
+#define TSC_CR_SYNCPOL ((uint32_t)0x00000008) /*!<Synchronization pin polarity */
+#define TSC_CR_IODEF ((uint32_t)0x00000010) /*!<IO default mode */
+
+#define TSC_CR_MCV ((uint32_t)0x000000E0) /*!<MCV[2:0] bits (Max Count Value) */
+#define TSC_CR_MCV_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define TSC_CR_MCV_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+#define TSC_CR_MCV_2 ((uint32_t)0x00000080) /*!<Bit 2 */
+
+#define TSC_CR_PGPSC ((uint32_t)0x00007000) /*!<PGPSC[2:0] bits (Pulse Generator Prescaler) */
+#define TSC_CR_PGPSC_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TSC_CR_PGPSC_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TSC_CR_PGPSC_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+
+#define TSC_CR_SSPSC ((uint32_t)0x00008000) /*!<Spread Spectrum Prescaler */
+#define TSC_CR_SSE ((uint32_t)0x00010000) /*!<Spread Spectrum Enable */
+
+#define TSC_CR_SSD ((uint32_t)0x00FE0000) /*!<SSD[6:0] bits (Spread Spectrum Deviation) */
+#define TSC_CR_SSD_0 ((uint32_t)0x00020000) /*!<Bit 0 */
+#define TSC_CR_SSD_1 ((uint32_t)0x00040000) /*!<Bit 1 */
+#define TSC_CR_SSD_2 ((uint32_t)0x00080000) /*!<Bit 2 */
+#define TSC_CR_SSD_3 ((uint32_t)0x00100000) /*!<Bit 3 */
+#define TSC_CR_SSD_4 ((uint32_t)0x00200000) /*!<Bit 4 */
+#define TSC_CR_SSD_5 ((uint32_t)0x00400000) /*!<Bit 5 */
+#define TSC_CR_SSD_6 ((uint32_t)0x00800000) /*!<Bit 6 */
+
+#define TSC_CR_CTPL ((uint32_t)0x0F000000) /*!<CTPL[3:0] bits (Charge Transfer pulse low) */
+#define TSC_CR_CTPL_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define TSC_CR_CTPL_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define TSC_CR_CTPL_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define TSC_CR_CTPL_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+
+#define TSC_CR_CTPH ((uint32_t)0xF0000000) /*!<CTPH[3:0] bits (Charge Transfer pulse high) */
+#define TSC_CR_CTPH_0 ((uint32_t)0x10000000) /*!<Bit 0 */
+#define TSC_CR_CTPH_1 ((uint32_t)0x20000000) /*!<Bit 1 */
+#define TSC_CR_CTPH_2 ((uint32_t)0x40000000) /*!<Bit 2 */
+#define TSC_CR_CTPH_3 ((uint32_t)0x80000000) /*!<Bit 3 */
+
+/******************* Bit definition for TSC_IER register ********************/
+#define TSC_IER_EOAIE ((uint32_t)0x00000001) /*!<End of acquisition interrupt enable */
+#define TSC_IER_MCEIE ((uint32_t)0x00000002) /*!<Max count error interrupt enable */
+
+/******************* Bit definition for TSC_ICR register ********************/
+#define TSC_ICR_EOAIC ((uint32_t)0x00000001) /*!<End of acquisition interrupt clear */
+#define TSC_ICR_MCEIC ((uint32_t)0x00000002) /*!<Max count error interrupt clear */
+
+/******************* Bit definition for TSC_ISR register ********************/
+#define TSC_ISR_EOAF ((uint32_t)0x00000001) /*!<End of acquisition flag */
+#define TSC_ISR_MCEF ((uint32_t)0x00000002) /*!<Max count error flag */
+
+/******************* Bit definition for TSC_IOHCR register ******************/
+#define TSC_IOHCR_G1_IO1 ((uint32_t)0x00000001) /*!<GROUP1_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G1_IO2 ((uint32_t)0x00000002) /*!<GROUP1_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G1_IO3 ((uint32_t)0x00000004) /*!<GROUP1_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G1_IO4 ((uint32_t)0x00000008) /*!<GROUP1_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G2_IO1 ((uint32_t)0x00000010) /*!<GROUP2_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G2_IO2 ((uint32_t)0x00000020) /*!<GROUP2_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G2_IO3 ((uint32_t)0x00000040) /*!<GROUP2_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G2_IO4 ((uint32_t)0x00000080) /*!<GROUP2_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G3_IO1 ((uint32_t)0x00000100) /*!<GROUP3_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G3_IO2 ((uint32_t)0x00000200) /*!<GROUP3_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G3_IO3 ((uint32_t)0x00000400) /*!<GROUP3_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G3_IO4 ((uint32_t)0x00000800) /*!<GROUP3_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G4_IO1 ((uint32_t)0x00001000) /*!<GROUP4_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G4_IO2 ((uint32_t)0x00002000) /*!<GROUP4_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G4_IO3 ((uint32_t)0x00004000) /*!<GROUP4_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G4_IO4 ((uint32_t)0x00008000) /*!<GROUP4_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G5_IO1 ((uint32_t)0x00010000) /*!<GROUP5_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G5_IO2 ((uint32_t)0x00020000) /*!<GROUP5_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G5_IO3 ((uint32_t)0x00040000) /*!<GROUP5_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G5_IO4 ((uint32_t)0x00080000) /*!<GROUP5_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G6_IO1 ((uint32_t)0x00100000) /*!<GROUP6_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G6_IO2 ((uint32_t)0x00200000) /*!<GROUP6_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G6_IO3 ((uint32_t)0x00400000) /*!<GROUP6_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G6_IO4 ((uint32_t)0x00800000) /*!<GROUP6_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G7_IO1 ((uint32_t)0x01000000) /*!<GROUP7_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G7_IO2 ((uint32_t)0x02000000) /*!<GROUP7_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G7_IO3 ((uint32_t)0x04000000) /*!<GROUP7_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G7_IO4 ((uint32_t)0x08000000) /*!<GROUP7_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G8_IO1 ((uint32_t)0x10000000) /*!<GROUP8_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G8_IO2 ((uint32_t)0x20000000) /*!<GROUP8_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G8_IO3 ((uint32_t)0x40000000) /*!<GROUP8_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G8_IO4 ((uint32_t)0x80000000) /*!<GROUP8_IO4 schmitt trigger hysteresis mode */
+
+/******************* Bit definition for TSC_IOASCR register *****************/
+#define TSC_IOASCR_G1_IO1 ((uint32_t)0x00000001) /*!<GROUP1_IO1 analog switch enable */
+#define TSC_IOASCR_G1_IO2 ((uint32_t)0x00000002) /*!<GROUP1_IO2 analog switch enable */
+#define TSC_IOASCR_G1_IO3 ((uint32_t)0x00000004) /*!<GROUP1_IO3 analog switch enable */
+#define TSC_IOASCR_G1_IO4 ((uint32_t)0x00000008) /*!<GROUP1_IO4 analog switch enable */
+#define TSC_IOASCR_G2_IO1 ((uint32_t)0x00000010) /*!<GROUP2_IO1 analog switch enable */
+#define TSC_IOASCR_G2_IO2 ((uint32_t)0x00000020) /*!<GROUP2_IO2 analog switch enable */
+#define TSC_IOASCR_G2_IO3 ((uint32_t)0x00000040) /*!<GROUP2_IO3 analog switch enable */
+#define TSC_IOASCR_G2_IO4 ((uint32_t)0x00000080) /*!<GROUP2_IO4 analog switch enable */
+#define TSC_IOASCR_G3_IO1 ((uint32_t)0x00000100) /*!<GROUP3_IO1 analog switch enable */
+#define TSC_IOASCR_G3_IO2 ((uint32_t)0x00000200) /*!<GROUP3_IO2 analog switch enable */
+#define TSC_IOASCR_G3_IO3 ((uint32_t)0x00000400) /*!<GROUP3_IO3 analog switch enable */
+#define TSC_IOASCR_G3_IO4 ((uint32_t)0x00000800) /*!<GROUP3_IO4 analog switch enable */
+#define TSC_IOASCR_G4_IO1 ((uint32_t)0x00001000) /*!<GROUP4_IO1 analog switch enable */
+#define TSC_IOASCR_G4_IO2 ((uint32_t)0x00002000) /*!<GROUP4_IO2 analog switch enable */
+#define TSC_IOASCR_G4_IO3 ((uint32_t)0x00004000) /*!<GROUP4_IO3 analog switch enable */
+#define TSC_IOASCR_G4_IO4 ((uint32_t)0x00008000) /*!<GROUP4_IO4 analog switch enable */
+#define TSC_IOASCR_G5_IO1 ((uint32_t)0x00010000) /*!<GROUP5_IO1 analog switch enable */
+#define TSC_IOASCR_G5_IO2 ((uint32_t)0x00020000) /*!<GROUP5_IO2 analog switch enable */
+#define TSC_IOASCR_G5_IO3 ((uint32_t)0x00040000) /*!<GROUP5_IO3 analog switch enable */
+#define TSC_IOASCR_G5_IO4 ((uint32_t)0x00080000) /*!<GROUP5_IO4 analog switch enable */
+#define TSC_IOASCR_G6_IO1 ((uint32_t)0x00100000) /*!<GROUP6_IO1 analog switch enable */
+#define TSC_IOASCR_G6_IO2 ((uint32_t)0x00200000) /*!<GROUP6_IO2 analog switch enable */
+#define TSC_IOASCR_G6_IO3 ((uint32_t)0x00400000) /*!<GROUP6_IO3 analog switch enable */
+#define TSC_IOASCR_G6_IO4 ((uint32_t)0x00800000) /*!<GROUP6_IO4 analog switch enable */
+#define TSC_IOASCR_G7_IO1 ((uint32_t)0x01000000) /*!<GROUP7_IO1 analog switch enable */
+#define TSC_IOASCR_G7_IO2 ((uint32_t)0x02000000) /*!<GROUP7_IO2 analog switch enable */
+#define TSC_IOASCR_G7_IO3 ((uint32_t)0x04000000) /*!<GROUP7_IO3 analog switch enable */
+#define TSC_IOASCR_G7_IO4 ((uint32_t)0x08000000) /*!<GROUP7_IO4 analog switch enable */
+#define TSC_IOASCR_G8_IO1 ((uint32_t)0x10000000) /*!<GROUP8_IO1 analog switch enable */
+#define TSC_IOASCR_G8_IO2 ((uint32_t)0x20000000) /*!<GROUP8_IO2 analog switch enable */
+#define TSC_IOASCR_G8_IO3 ((uint32_t)0x40000000) /*!<GROUP8_IO3 analog switch enable */
+#define TSC_IOASCR_G8_IO4 ((uint32_t)0x80000000) /*!<GROUP8_IO4 analog switch enable */
+
+/******************* Bit definition for TSC_IOSCR register ******************/
+#define TSC_IOSCR_G1_IO1 ((uint32_t)0x00000001) /*!<GROUP1_IO1 sampling mode */
+#define TSC_IOSCR_G1_IO2 ((uint32_t)0x00000002) /*!<GROUP1_IO2 sampling mode */
+#define TSC_IOSCR_G1_IO3 ((uint32_t)0x00000004) /*!<GROUP1_IO3 sampling mode */
+#define TSC_IOSCR_G1_IO4 ((uint32_t)0x00000008) /*!<GROUP1_IO4 sampling mode */
+#define TSC_IOSCR_G2_IO1 ((uint32_t)0x00000010) /*!<GROUP2_IO1 sampling mode */
+#define TSC_IOSCR_G2_IO2 ((uint32_t)0x00000020) /*!<GROUP2_IO2 sampling mode */
+#define TSC_IOSCR_G2_IO3 ((uint32_t)0x00000040) /*!<GROUP2_IO3 sampling mode */
+#define TSC_IOSCR_G2_IO4 ((uint32_t)0x00000080) /*!<GROUP2_IO4 sampling mode */
+#define TSC_IOSCR_G3_IO1 ((uint32_t)0x00000100) /*!<GROUP3_IO1 sampling mode */
+#define TSC_IOSCR_G3_IO2 ((uint32_t)0x00000200) /*!<GROUP3_IO2 sampling mode */
+#define TSC_IOSCR_G3_IO3 ((uint32_t)0x00000400) /*!<GROUP3_IO3 sampling mode */
+#define TSC_IOSCR_G3_IO4 ((uint32_t)0x00000800) /*!<GROUP3_IO4 sampling mode */
+#define TSC_IOSCR_G4_IO1 ((uint32_t)0x00001000) /*!<GROUP4_IO1 sampling mode */
+#define TSC_IOSCR_G4_IO2 ((uint32_t)0x00002000) /*!<GROUP4_IO2 sampling mode */
+#define TSC_IOSCR_G4_IO3 ((uint32_t)0x00004000) /*!<GROUP4_IO3 sampling mode */
+#define TSC_IOSCR_G4_IO4 ((uint32_t)0x00008000) /*!<GROUP4_IO4 sampling mode */
+#define TSC_IOSCR_G5_IO1 ((uint32_t)0x00010000) /*!<GROUP5_IO1 sampling mode */
+#define TSC_IOSCR_G5_IO2 ((uint32_t)0x00020000) /*!<GROUP5_IO2 sampling mode */
+#define TSC_IOSCR_G5_IO3 ((uint32_t)0x00040000) /*!<GROUP5_IO3 sampling mode */
+#define TSC_IOSCR_G5_IO4 ((uint32_t)0x00080000) /*!<GROUP5_IO4 sampling mode */
+#define TSC_IOSCR_G6_IO1 ((uint32_t)0x00100000) /*!<GROUP6_IO1 sampling mode */
+#define TSC_IOSCR_G6_IO2 ((uint32_t)0x00200000) /*!<GROUP6_IO2 sampling mode */
+#define TSC_IOSCR_G6_IO3 ((uint32_t)0x00400000) /*!<GROUP6_IO3 sampling mode */
+#define TSC_IOSCR_G6_IO4 ((uint32_t)0x00800000) /*!<GROUP6_IO4 sampling mode */
+#define TSC_IOSCR_G7_IO1 ((uint32_t)0x01000000) /*!<GROUP7_IO1 sampling mode */
+#define TSC_IOSCR_G7_IO2 ((uint32_t)0x02000000) /*!<GROUP7_IO2 sampling mode */
+#define TSC_IOSCR_G7_IO3 ((uint32_t)0x04000000) /*!<GROUP7_IO3 sampling mode */
+#define TSC_IOSCR_G7_IO4 ((uint32_t)0x08000000) /*!<GROUP7_IO4 sampling mode */
+#define TSC_IOSCR_G8_IO1 ((uint32_t)0x10000000) /*!<GROUP8_IO1 sampling mode */
+#define TSC_IOSCR_G8_IO2 ((uint32_t)0x20000000) /*!<GROUP8_IO2 sampling mode */
+#define TSC_IOSCR_G8_IO3 ((uint32_t)0x40000000) /*!<GROUP8_IO3 sampling mode */
+#define TSC_IOSCR_G8_IO4 ((uint32_t)0x80000000) /*!<GROUP8_IO4 sampling mode */
+
+/******************* Bit definition for TSC_IOCCR register ******************/
+#define TSC_IOCCR_G1_IO1 ((uint32_t)0x00000001) /*!<GROUP1_IO1 channel mode */
+#define TSC_IOCCR_G1_IO2 ((uint32_t)0x00000002) /*!<GROUP1_IO2 channel mode */
+#define TSC_IOCCR_G1_IO3 ((uint32_t)0x00000004) /*!<GROUP1_IO3 channel mode */
+#define TSC_IOCCR_G1_IO4 ((uint32_t)0x00000008) /*!<GROUP1_IO4 channel mode */
+#define TSC_IOCCR_G2_IO1 ((uint32_t)0x00000010) /*!<GROUP2_IO1 channel mode */
+#define TSC_IOCCR_G2_IO2 ((uint32_t)0x00000020) /*!<GROUP2_IO2 channel mode */
+#define TSC_IOCCR_G2_IO3 ((uint32_t)0x00000040) /*!<GROUP2_IO3 channel mode */
+#define TSC_IOCCR_G2_IO4 ((uint32_t)0x00000080) /*!<GROUP2_IO4 channel mode */
+#define TSC_IOCCR_G3_IO1 ((uint32_t)0x00000100) /*!<GROUP3_IO1 channel mode */
+#define TSC_IOCCR_G3_IO2 ((uint32_t)0x00000200) /*!<GROUP3_IO2 channel mode */
+#define TSC_IOCCR_G3_IO3 ((uint32_t)0x00000400) /*!<GROUP3_IO3 channel mode */
+#define TSC_IOCCR_G3_IO4 ((uint32_t)0x00000800) /*!<GROUP3_IO4 channel mode */
+#define TSC_IOCCR_G4_IO1 ((uint32_t)0x00001000) /*!<GROUP4_IO1 channel mode */
+#define TSC_IOCCR_G4_IO2 ((uint32_t)0x00002000) /*!<GROUP4_IO2 channel mode */
+#define TSC_IOCCR_G4_IO3 ((uint32_t)0x00004000) /*!<GROUP4_IO3 channel mode */
+#define TSC_IOCCR_G4_IO4 ((uint32_t)0x00008000) /*!<GROUP4_IO4 channel mode */
+#define TSC_IOCCR_G5_IO1 ((uint32_t)0x00010000) /*!<GROUP5_IO1 channel mode */
+#define TSC_IOCCR_G5_IO2 ((uint32_t)0x00020000) /*!<GROUP5_IO2 channel mode */
+#define TSC_IOCCR_G5_IO3 ((uint32_t)0x00040000) /*!<GROUP5_IO3 channel mode */
+#define TSC_IOCCR_G5_IO4 ((uint32_t)0x00080000) /*!<GROUP5_IO4 channel mode */
+#define TSC_IOCCR_G6_IO1 ((uint32_t)0x00100000) /*!<GROUP6_IO1 channel mode */
+#define TSC_IOCCR_G6_IO2 ((uint32_t)0x00200000) /*!<GROUP6_IO2 channel mode */
+#define TSC_IOCCR_G6_IO3 ((uint32_t)0x00400000) /*!<GROUP6_IO3 channel mode */
+#define TSC_IOCCR_G6_IO4 ((uint32_t)0x00800000) /*!<GROUP6_IO4 channel mode */
+#define TSC_IOCCR_G7_IO1 ((uint32_t)0x01000000) /*!<GROUP7_IO1 channel mode */
+#define TSC_IOCCR_G7_IO2 ((uint32_t)0x02000000) /*!<GROUP7_IO2 channel mode */
+#define TSC_IOCCR_G7_IO3 ((uint32_t)0x04000000) /*!<GROUP7_IO3 channel mode */
+#define TSC_IOCCR_G7_IO4 ((uint32_t)0x08000000) /*!<GROUP7_IO4 channel mode */
+#define TSC_IOCCR_G8_IO1 ((uint32_t)0x10000000) /*!<GROUP8_IO1 channel mode */
+#define TSC_IOCCR_G8_IO2 ((uint32_t)0x20000000) /*!<GROUP8_IO2 channel mode */
+#define TSC_IOCCR_G8_IO3 ((uint32_t)0x40000000) /*!<GROUP8_IO3 channel mode */
+#define TSC_IOCCR_G8_IO4 ((uint32_t)0x80000000) /*!<GROUP8_IO4 channel mode */
+
+/******************* Bit definition for TSC_IOGCSR register *****************/
+#define TSC_IOGCSR_G1E ((uint32_t)0x00000001) /*!<Analog IO GROUP1 enable */
+#define TSC_IOGCSR_G2E ((uint32_t)0x00000002) /*!<Analog IO GROUP2 enable */
+#define TSC_IOGCSR_G3E ((uint32_t)0x00000004) /*!<Analog IO GROUP3 enable */
+#define TSC_IOGCSR_G4E ((uint32_t)0x00000008) /*!<Analog IO GROUP4 enable */
+#define TSC_IOGCSR_G5E ((uint32_t)0x00000010) /*!<Analog IO GROUP5 enable */
+#define TSC_IOGCSR_G6E ((uint32_t)0x00000020) /*!<Analog IO GROUP6 enable */
+#define TSC_IOGCSR_G7E ((uint32_t)0x00000040) /*!<Analog IO GROUP7 enable */
+#define TSC_IOGCSR_G8E ((uint32_t)0x00000080) /*!<Analog IO GROUP8 enable */
+#define TSC_IOGCSR_G1S ((uint32_t)0x00010000) /*!<Analog IO GROUP1 status */
+#define TSC_IOGCSR_G2S ((uint32_t)0x00020000) /*!<Analog IO GROUP2 status */
+#define TSC_IOGCSR_G3S ((uint32_t)0x00040000) /*!<Analog IO GROUP3 status */
+#define TSC_IOGCSR_G4S ((uint32_t)0x00080000) /*!<Analog IO GROUP4 status */
+#define TSC_IOGCSR_G5S ((uint32_t)0x00100000) /*!<Analog IO GROUP5 status */
+#define TSC_IOGCSR_G6S ((uint32_t)0x00200000) /*!<Analog IO GROUP6 status */
+#define TSC_IOGCSR_G7S ((uint32_t)0x00400000) /*!<Analog IO GROUP7 status */
+#define TSC_IOGCSR_G8S ((uint32_t)0x00800000) /*!<Analog IO GROUP8 status */
+
+/******************* Bit definition for TSC_IOGXCR register *****************/
+#define TSC_IOGXCR_CNT ((uint32_t)0x00003FFF) /*!<CNT[13:0] bits (Counter value) */
+
+/******************************************************************************/
+/* */
+/* Universal Synchronous Asynchronous Receiver Transmitter (USART) */
+/* */
+/******************************************************************************/
+/****************** Bit definition for USART_CR1 register *******************/
+#define USART_CR1_UE ((uint32_t)0x00000001) /*!< USART Enable */
+#define USART_CR1_UESM ((uint32_t)0x00000002) /*!< USART Enable in STOP Mode */
+#define USART_CR1_RE ((uint32_t)0x00000004) /*!< Receiver Enable */
+#define USART_CR1_TE ((uint32_t)0x00000008) /*!< Transmitter Enable */
+#define USART_CR1_IDLEIE ((uint32_t)0x00000010) /*!< IDLE Interrupt Enable */
+#define USART_CR1_RXNEIE ((uint32_t)0x00000020) /*!< RXNE Interrupt Enable */
+#define USART_CR1_TCIE ((uint32_t)0x00000040) /*!< Transmission Complete Interrupt Enable */
+#define USART_CR1_TXEIE ((uint32_t)0x00000080) /*!< TXE Interrupt Enable */
+#define USART_CR1_PEIE ((uint32_t)0x00000100) /*!< PE Interrupt Enable */
+#define USART_CR1_PS ((uint32_t)0x00000200) /*!< Parity Selection */
+#define USART_CR1_PCE ((uint32_t)0x00000400) /*!< Parity Control Enable */
+#define USART_CR1_WAKE ((uint32_t)0x00000800) /*!< Receiver Wakeup method */
+#define USART_CR1_M0 ((uint32_t)0x00001000) /*!< Word length bit 0 */
+#define USART_CR1_MME ((uint32_t)0x00002000) /*!< Mute Mode Enable */
+#define USART_CR1_CMIE ((uint32_t)0x00004000) /*!< Character match interrupt enable */
+#define USART_CR1_OVER8 ((uint32_t)0x00008000) /*!< Oversampling by 8-bit or 16-bit mode */
+#define USART_CR1_DEDT ((uint32_t)0x001F0000) /*!< DEDT[4:0] bits (Driver Enable Deassertion Time) */
+#define USART_CR1_DEDT_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define USART_CR1_DEDT_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define USART_CR1_DEDT_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define USART_CR1_DEDT_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+#define USART_CR1_DEDT_4 ((uint32_t)0x00100000) /*!< Bit 4 */
+#define USART_CR1_DEAT ((uint32_t)0x03E00000) /*!< DEAT[4:0] bits (Driver Enable Assertion Time) */
+#define USART_CR1_DEAT_0 ((uint32_t)0x00200000) /*!< Bit 0 */
+#define USART_CR1_DEAT_1 ((uint32_t)0x00400000) /*!< Bit 1 */
+#define USART_CR1_DEAT_2 ((uint32_t)0x00800000) /*!< Bit 2 */
+#define USART_CR1_DEAT_3 ((uint32_t)0x01000000) /*!< Bit 3 */
+#define USART_CR1_DEAT_4 ((uint32_t)0x02000000) /*!< Bit 4 */
+#define USART_CR1_RTOIE ((uint32_t)0x04000000) /*!< Receive Time Out interrupt enable */
+#define USART_CR1_EOBIE ((uint32_t)0x08000000) /*!< End of Block interrupt enable */
+#define USART_CR1_M1 ((uint32_t)0x10000000) /*!< Word length bit 1 */
+#define USART_CR1_M ((uint32_t)0x10001000) /*!< [M1:M0] Word length */
+
+/****************** Bit definition for USART_CR2 register *******************/
+#define USART_CR2_ADDM7 ((uint32_t)0x00000010) /*!< 7-bit or 4-bit Address Detection */
+#define USART_CR2_LBDL ((uint32_t)0x00000020) /*!< LIN Break Detection Length */
+#define USART_CR2_LBDIE ((uint32_t)0x00000040) /*!< LIN Break Detection Interrupt Enable */
+#define USART_CR2_LBCL ((uint32_t)0x00000100) /*!< Last Bit Clock pulse */
+#define USART_CR2_CPHA ((uint32_t)0x00000200) /*!< Clock Phase */
+#define USART_CR2_CPOL ((uint32_t)0x00000400) /*!< Clock Polarity */
+#define USART_CR2_CLKEN ((uint32_t)0x00000800) /*!< Clock Enable */
+#define USART_CR2_STOP ((uint32_t)0x00003000) /*!< STOP[1:0] bits (STOP bits) */
+#define USART_CR2_STOP_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define USART_CR2_STOP_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+#define USART_CR2_LINEN ((uint32_t)0x00004000) /*!< LIN mode enable */
+#define USART_CR2_SWAP ((uint32_t)0x00008000) /*!< SWAP TX/RX pins */
+#define USART_CR2_RXINV ((uint32_t)0x00010000) /*!< RX pin active level inversion */
+#define USART_CR2_TXINV ((uint32_t)0x00020000) /*!< TX pin active level inversion */
+#define USART_CR2_DATAINV ((uint32_t)0x00040000) /*!< Binary data inversion */
+#define USART_CR2_MSBFIRST ((uint32_t)0x00080000) /*!< Most Significant Bit First */
+#define USART_CR2_ABREN ((uint32_t)0x00100000) /*!< Auto Baud-Rate Enable*/
+#define USART_CR2_ABRMODE ((uint32_t)0x00600000) /*!< ABRMOD[1:0] bits (Auto Baud-Rate Mode) */
+#define USART_CR2_ABRMODE_0 ((uint32_t)0x00200000) /*!< Bit 0 */
+#define USART_CR2_ABRMODE_1 ((uint32_t)0x00400000) /*!< Bit 1 */
+#define USART_CR2_RTOEN ((uint32_t)0x00800000) /*!< Receiver Time-Out enable */
+#define USART_CR2_ADD ((uint32_t)0xFF000000) /*!< Address of the USART node */
+
+/****************** Bit definition for USART_CR3 register *******************/
+#define USART_CR3_EIE ((uint32_t)0x00000001) /*!< Error Interrupt Enable */
+#define USART_CR3_IREN ((uint32_t)0x00000002) /*!< IrDA mode Enable */
+#define USART_CR3_IRLP ((uint32_t)0x00000004) /*!< IrDA Low-Power */
+#define USART_CR3_HDSEL ((uint32_t)0x00000008) /*!< Half-Duplex Selection */
+#define USART_CR3_NACK ((uint32_t)0x00000010) /*!< SmartCard NACK enable */
+#define USART_CR3_SCEN ((uint32_t)0x00000020) /*!< SmartCard mode enable */
+#define USART_CR3_DMAR ((uint32_t)0x00000040) /*!< DMA Enable Receiver */
+#define USART_CR3_DMAT ((uint32_t)0x00000080) /*!< DMA Enable Transmitter */
+#define USART_CR3_RTSE ((uint32_t)0x00000100) /*!< RTS Enable */
+#define USART_CR3_CTSE ((uint32_t)0x00000200) /*!< CTS Enable */
+#define USART_CR3_CTSIE ((uint32_t)0x00000400) /*!< CTS Interrupt Enable */
+#define USART_CR3_ONEBIT ((uint32_t)0x00000800) /*!< One sample bit method enable */
+#define USART_CR3_OVRDIS ((uint32_t)0x00001000) /*!< Overrun Disable */
+#define USART_CR3_DDRE ((uint32_t)0x00002000) /*!< DMA Disable on Reception Error */
+#define USART_CR3_DEM ((uint32_t)0x00004000) /*!< Driver Enable Mode */
+#define USART_CR3_DEP ((uint32_t)0x00008000) /*!< Driver Enable Polarity Selection */
+#define USART_CR3_SCARCNT ((uint32_t)0x000E0000) /*!< SCARCNT[2:0] bits (SmartCard Auto-Retry Count) */
+#define USART_CR3_SCARCNT_0 ((uint32_t)0x00020000) /*!< Bit 0 */
+#define USART_CR3_SCARCNT_1 ((uint32_t)0x00040000) /*!< Bit 1 */
+#define USART_CR3_SCARCNT_2 ((uint32_t)0x00080000) /*!< Bit 2 */
+#define USART_CR3_WUS ((uint32_t)0x00300000) /*!< WUS[1:0] bits (Wake UP Interrupt Flag Selection) */
+#define USART_CR3_WUS_0 ((uint32_t)0x00100000) /*!< Bit 0 */
+#define USART_CR3_WUS_1 ((uint32_t)0x00200000) /*!< Bit 1 */
+#define USART_CR3_WUFIE ((uint32_t)0x00400000) /*!< Wake Up Interrupt Enable */
+
+/****************** Bit definition for USART_BRR register *******************/
+#define USART_BRR_DIV_FRACTION ((uint32_t)0x0000000F) /*!< Fraction of USARTDIV */
+#define USART_BRR_DIV_MANTISSA ((uint32_t)0x0000FFF0) /*!< Mantissa of USARTDIV */
+
+/****************** Bit definition for USART_GTPR register ******************/
+#define USART_GTPR_PSC ((uint32_t)0x000000FF) /*!< PSC[7:0] bits (Prescaler value) */
+#define USART_GTPR_GT ((uint32_t)0x0000FF00) /*!< GT[7:0] bits (Guard time value) */
+
+
+/******************* Bit definition for USART_RTOR register *****************/
+#define USART_RTOR_RTO ((uint32_t)0x00FFFFFF) /*!< Receiver Time Out Value */
+#define USART_RTOR_BLEN ((uint32_t)0xFF000000) /*!< Block Length */
+
+/******************* Bit definition for USART_RQR register ******************/
+#define USART_RQR_ABRRQ ((uint32_t)0x00000001) /*!< Auto-Baud Rate Request */
+#define USART_RQR_SBKRQ ((uint32_t)0x00000002) /*!< Send Break Request */
+#define USART_RQR_MMRQ ((uint32_t)0x00000004) /*!< Mute Mode Request */
+#define USART_RQR_RXFRQ ((uint32_t)0x00000008) /*!< Receive Data flush Request */
+#define USART_RQR_TXFRQ ((uint32_t)0x00000010) /*!< Transmit data flush Request */
+
+/******************* Bit definition for USART_ISR register ******************/
+#define USART_ISR_PE ((uint32_t)0x00000001) /*!< Parity Error */
+#define USART_ISR_FE ((uint32_t)0x00000002) /*!< Framing Error */
+#define USART_ISR_NE ((uint32_t)0x00000004) /*!< Noise detected Flag */
+#define USART_ISR_ORE ((uint32_t)0x00000008) /*!< OverRun Error */
+#define USART_ISR_IDLE ((uint32_t)0x00000010) /*!< IDLE line detected */
+#define USART_ISR_RXNE ((uint32_t)0x00000020) /*!< Read Data Register Not Empty */
+#define USART_ISR_TC ((uint32_t)0x00000040) /*!< Transmission Complete */
+#define USART_ISR_TXE ((uint32_t)0x00000080) /*!< Transmit Data Register Empty */
+#define USART_ISR_LBDF ((uint32_t)0x00000100) /*!< LIN Break Detection Flag */
+#define USART_ISR_CTSIF ((uint32_t)0x00000200) /*!< CTS interrupt flag */
+#define USART_ISR_CTS ((uint32_t)0x00000400) /*!< CTS flag */
+#define USART_ISR_RTOF ((uint32_t)0x00000800) /*!< Receiver Time Out */
+#define USART_ISR_EOBF ((uint32_t)0x00001000) /*!< End Of Block Flag */
+#define USART_ISR_ABRE ((uint32_t)0x00004000) /*!< Auto-Baud Rate Error */
+#define USART_ISR_ABRF ((uint32_t)0x00008000) /*!< Auto-Baud Rate Flag */
+#define USART_ISR_BUSY ((uint32_t)0x00010000) /*!< Busy Flag */
+#define USART_ISR_CMF ((uint32_t)0x00020000) /*!< Character Match Flag */
+#define USART_ISR_SBKF ((uint32_t)0x00040000) /*!< Send Break Flag */
+#define USART_ISR_RWU ((uint32_t)0x00080000) /*!< Receive Wake Up from mute mode Flag */
+#define USART_ISR_WUF ((uint32_t)0x00100000) /*!< Wake Up from stop mode Flag */
+#define USART_ISR_TEACK ((uint32_t)0x00200000) /*!< Transmit Enable Acknowledge Flag */
+#define USART_ISR_REACK ((uint32_t)0x00400000) /*!< Receive Enable Acknowledge Flag */
+
+/******************* Bit definition for USART_ICR register ******************/
+#define USART_ICR_PECF ((uint32_t)0x00000001) /*!< Parity Error Clear Flag */
+#define USART_ICR_FECF ((uint32_t)0x00000002) /*!< Framing Error Clear Flag */
+#define USART_ICR_NCF ((uint32_t)0x00000004) /*!< Noise detected Clear Flag */
+#define USART_ICR_ORECF ((uint32_t)0x00000008) /*!< OverRun Error Clear Flag */
+#define USART_ICR_IDLECF ((uint32_t)0x00000010) /*!< IDLE line detected Clear Flag */
+#define USART_ICR_TCCF ((uint32_t)0x00000040) /*!< Transmission Complete Clear Flag */
+#define USART_ICR_LBDCF ((uint32_t)0x00000100) /*!< LIN Break Detection Clear Flag */
+#define USART_ICR_CTSCF ((uint32_t)0x00000200) /*!< CTS Interrupt Clear Flag */
+#define USART_ICR_RTOCF ((uint32_t)0x00000800) /*!< Receiver Time Out Clear Flag */
+#define USART_ICR_EOBCF ((uint32_t)0x00001000) /*!< End Of Block Clear Flag */
+#define USART_ICR_CMCF ((uint32_t)0x00020000) /*!< Character Match Clear Flag */
+#define USART_ICR_WUCF ((uint32_t)0x00100000) /*!< Wake Up from stop mode Clear Flag */
+
+/******************* Bit definition for USART_RDR register ******************/
+#define USART_RDR_RDR ((uint16_t)0x01FF) /*!< RDR[8:0] bits (Receive Data value) */
+
+/******************* Bit definition for USART_TDR register ******************/
+#define USART_TDR_TDR ((uint16_t)0x01FF) /*!< TDR[8:0] bits (Transmit Data value) */
+
+/******************************************************************************/
+/* */
+/* USB Device General registers */
+/* */
+/******************************************************************************/
+#define USB_CNTR (USB_BASE + 0x40) /*!< Control register */
+#define USB_ISTR (USB_BASE + 0x44) /*!< Interrupt status register */
+#define USB_FNR (USB_BASE + 0x48) /*!< Frame number register */
+#define USB_DADDR (USB_BASE + 0x4C) /*!< Device address register */
+#define USB_BTABLE (USB_BASE + 0x50) /*!< Buffer Table address register */
+#define USB_LPMCSR (USB_BASE + 0x54) /*!< LPM Control and Status register */
+#define USB_BCDR (USB_BASE + 0x58) /*!< Battery Charging detector register*/
+
+/**************************** ISTR interrupt events *************************/
+#define USB_ISTR_CTR ((uint16_t)0x8000) /*!< Correct TRansfer (clear-only bit) */
+#define USB_ISTR_PMAOVR ((uint16_t)0x4000) /*!< DMA OVeR/underrun (clear-only bit) */
+#define USB_ISTR_ERR ((uint16_t)0x2000) /*!< ERRor (clear-only bit) */
+#define USB_ISTR_WKUP ((uint16_t)0x1000) /*!< WaKe UP (clear-only bit) */
+#define USB_ISTR_SUSP ((uint16_t)0x0800) /*!< SUSPend (clear-only bit) */
+#define USB_ISTR_RESET ((uint16_t)0x0400) /*!< RESET (clear-only bit) */
+#define USB_ISTR_SOF ((uint16_t)0x0200) /*!< Start Of Frame (clear-only bit) */
+#define USB_ISTR_ESOF ((uint16_t)0x0100) /*!< Expected Start Of Frame (clear-only bit) */
+#define USB_ISTR_L1REQ ((uint16_t)0x0080) /*!< LPM L1 state request */
+#define USB_ISTR_DIR ((uint16_t)0x0010) /*!< DIRection of transaction (read-only bit) */
+#define USB_ISTR_EP_ID ((uint16_t)0x000F) /*!< EndPoint IDentifier (read-only bit) */
+
+#define USB_CLR_CTR (~USB_ISTR_CTR) /*!< clear Correct TRansfer bit */
+#define USB_CLR_PMAOVR (~USB_ISTR_PMAOVR) /*!< clear DMA OVeR/underrun bit*/
+#define USB_CLR_ERR (~USB_ISTR_ERR) /*!< clear ERRor bit */
+#define USB_CLR_WKUP (~USB_ISTR_WKUP) /*!< clear WaKe UP bit */
+#define USB_CLR_SUSP (~USB_ISTR_SUSP) /*!< clear SUSPend bit */
+#define USB_CLR_RESET (~USB_ISTR_RESET) /*!< clear RESET bit */
+#define USB_CLR_SOF (~USB_ISTR_SOF) /*!< clear Start Of Frame bit */
+#define USB_CLR_ESOF (~USB_ISTR_ESOF) /*!< clear Expected Start Of Frame bit */
+#define USB_CLR_L1REQ (~USB_ISTR_L1REQ) /*!< clear LPM L1 bit */
+
+/************************* CNTR control register bits definitions ***********/
+#define USB_CNTR_CTRM ((uint16_t)0x8000) /*!< Correct TRansfer Mask */
+#define USB_CNTR_PMAOVRM ((uint16_t)0x4000) /*!< DMA OVeR/underrun Mask */
+#define USB_CNTR_ERRM ((uint16_t)0x2000) /*!< ERRor Mask */
+#define USB_CNTR_WKUPM ((uint16_t)0x1000) /*!< WaKe UP Mask */
+#define USB_CNTR_SUSPM ((uint16_t)0x0800) /*!< SUSPend Mask */
+#define USB_CNTR_RESETM ((uint16_t)0x0400) /*!< RESET Mask */
+#define USB_CNTR_SOFM ((uint16_t)0x0200) /*!< Start Of Frame Mask */
+#define USB_CNTR_ESOFM ((uint16_t)0x0100) /*!< Expected Start Of Frame Mask */
+#define USB_CNTR_L1REQM ((uint16_t)0x0080) /*!< LPM L1 state request interrupt mask */
+#define USB_CNTR_L1RESUME ((uint16_t)0x0020) /*!< LPM L1 Resume request */
+#define USB_CNTR_RESUME ((uint16_t)0x0010) /*!< RESUME request */
+#define USB_CNTR_FSUSP ((uint16_t)0x0008) /*!< Force SUSPend */
+#define USB_CNTR_LPMODE ((uint16_t)0x0004) /*!< Low-power MODE */
+#define USB_CNTR_PDWN ((uint16_t)0x0002) /*!< Power DoWN */
+#define USB_CNTR_FRES ((uint16_t)0x0001) /*!< Force USB RESet */
+
+/************************* BCDR control register bits definitions ***********/
+#define USB_BCDR_DPPU ((uint16_t)0x8000) /*!< DP Pull-up Enable */
+#define USB_BCDR_PS2DET ((uint16_t)0x0080) /*!< PS2 port or proprietary charger detected */
+#define USB_BCDR_SDET ((uint16_t)0x0040) /*!< Secondary detection (SD) status */
+#define USB_BCDR_PDET ((uint16_t)0x0020) /*!< Primary detection (PD) status */
+#define USB_BCDR_DCDET ((uint16_t)0x0010) /*!< Data contact detection (DCD) status */
+#define USB_BCDR_SDEN ((uint16_t)0x0008) /*!< Secondary detection (SD) mode enable */
+#define USB_BCDR_PDEN ((uint16_t)0x0004) /*!< Primary detection (PD) mode enable */
+#define USB_BCDR_DCDEN ((uint16_t)0x0002) /*!< Data contact detection (DCD) mode enable */
+#define USB_BCDR_BCDEN ((uint16_t)0x0001) /*!< Battery charging detector (BCD) enable */
+
+/*************************** LPM register bits definitions ******************/
+#define USB_LPMCSR_BESL ((uint16_t)0x00F0) /*!< BESL value received with last ACKed LPM Token */
+#define USB_LPMCSR_REMWAKE ((uint16_t)0x0008) /*!< bRemoteWake value received with last ACKed LPM Token */
+#define USB_LPMCSR_LPMACK ((uint16_t)0x0002) /*!< LPM Token acknowledge enable*/
+#define USB_LPMCSR_LMPEN ((uint16_t)0x0001) /*!< LPM support enable */
+
+/******************** FNR Frame Number Register bit definitions ************/
+#define USB_FNR_RXDP ((uint16_t)0x8000) /*!< status of D+ data line */
+#define USB_FNR_RXDM ((uint16_t)0x4000) /*!< status of D- data line */
+#define USB_FNR_LCK ((uint16_t)0x2000) /*!< LoCKed */
+#define USB_FNR_LSOF ((uint16_t)0x1800) /*!< Lost SOF */
+#define USB_FNR_FN ((uint16_t)0x07FF) /*!< Frame Number */
+
+/******************** DADDR Device ADDRess bit definitions ****************/
+#define USB_DADDR_EF ((uint8_t)0x80) /*!< USB device address Enable Function */
+#define USB_DADDR_ADD ((uint8_t)0x7F) /*!< USB device address */
+
+/****************************** Endpoint register *************************/
+#define USB_EP0R USB_BASE /*!< endpoint 0 register address */
+#define USB_EP1R (USB_BASE + 0x04) /*!< endpoint 1 register address */
+#define USB_EP2R (USB_BASE + 0x08) /*!< endpoint 2 register address */
+#define USB_EP3R (USB_BASE + 0x0C) /*!< endpoint 3 register address */
+#define USB_EP4R (USB_BASE + 0x10) /*!< endpoint 4 register address */
+#define USB_EP5R (USB_BASE + 0x14) /*!< endpoint 5 register address */
+#define USB_EP6R (USB_BASE + 0x18) /*!< endpoint 6 register address */
+#define USB_EP7R (USB_BASE + 0x1C) /*!< endpoint 7 register address */
+/* bit positions */
+#define USB_EP_CTR_RX ((uint16_t)0x8000) /*!< EndPoint Correct TRansfer RX */
+#define USB_EP_DTOG_RX ((uint16_t)0x4000) /*!< EndPoint Data TOGGLE RX */
+#define USB_EPRX_STAT ((uint16_t)0x3000) /*!< EndPoint RX STATus bit field */
+#define USB_EP_SETUP ((uint16_t)0x0800) /*!< EndPoint SETUP */
+#define USB_EP_T_FIELD ((uint16_t)0x0600) /*!< EndPoint TYPE */
+#define USB_EP_KIND ((uint16_t)0x0100) /*!< EndPoint KIND */
+#define USB_EP_CTR_TX ((uint16_t)0x0080) /*!< EndPoint Correct TRansfer TX */
+#define USB_EP_DTOG_TX ((uint16_t)0x0040) /*!< EndPoint Data TOGGLE TX */
+#define USB_EPTX_STAT ((uint16_t)0x0030) /*!< EndPoint TX STATus bit field */
+#define USB_EPADDR_FIELD ((uint16_t)0x000F) /*!< EndPoint ADDRess FIELD */
+
+/* EndPoint REGister MASK (no toggle fields) */
+#define USB_EPREG_MASK (USB_EP_CTR_RX|USB_EP_SETUP|USB_EP_T_FIELD|USB_EP_KIND|USB_EP_CTR_TX|USB_EPADDR_FIELD)
+ /*!< EP_TYPE[1:0] EndPoint TYPE */
+#define USB_EP_TYPE_MASK ((uint16_t)0x0600) /*!< EndPoint TYPE Mask */
+#define USB_EP_BULK ((uint16_t)0x0000) /*!< EndPoint BULK */
+#define USB_EP_CONTROL ((uint16_t)0x0200) /*!< EndPoint CONTROL */
+#define USB_EP_ISOCHRONOUS ((uint16_t)0x0400) /*!< EndPoint ISOCHRONOUS */
+#define USB_EP_INTERRUPT ((uint16_t)0x0600) /*!< EndPoint INTERRUPT */
+#define USB_EP_T_MASK (~USB_EP_T_FIELD & USB_EPREG_MASK)
+
+#define USB_EPKIND_MASK (~USB_EP_KIND & USB_EPREG_MASK) /*!< EP_KIND EndPoint KIND */
+ /*!< STAT_TX[1:0] STATus for TX transfer */
+#define USB_EP_TX_DIS ((uint16_t)0x0000) /*!< EndPoint TX DISabled */
+#define USB_EP_TX_STALL ((uint16_t)0x0010) /*!< EndPoint TX STALLed */
+#define USB_EP_TX_NAK ((uint16_t)0x0020) /*!< EndPoint TX NAKed */
+#define USB_EP_TX_VALID ((uint16_t)0x0030) /*!< EndPoint TX VALID */
+#define USB_EPTX_DTOG1 ((uint16_t)0x0010) /*!< EndPoint TX Data TOGgle bit1 */
+#define USB_EPTX_DTOG2 ((uint16_t)0x0020) /*!< EndPoint TX Data TOGgle bit2 */
+#define USB_EPTX_DTOGMASK (USB_EPTX_STAT|USB_EPREG_MASK)
+ /*!< STAT_RX[1:0] STATus for RX transfer */
+#define USB_EP_RX_DIS ((uint16_t)0x0000) /*!< EndPoint RX DISabled */
+#define USB_EP_RX_STALL ((uint16_t)0x1000) /*!< EndPoint RX STALLed */
+#define USB_EP_RX_NAK ((uint16_t)0x2000) /*!< EndPoint RX NAKed */
+#define USB_EP_RX_VALID ((uint16_t)0x3000) /*!< EndPoint RX VALID */
+#define USB_EPRX_DTOG1 ((uint16_t)0x1000) /*!< EndPoint RX Data TOGgle bit1 */
+#define USB_EPRX_DTOG2 ((uint16_t)0x2000) /*!< EndPoint RX Data TOGgle bit1 */
+#define USB_EPRX_DTOGMASK (USB_EPRX_STAT|USB_EPREG_MASK)
+
+/******************************************************************************/
+/* */
+/* Window WATCHDOG (WWDG) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for WWDG_CR register ********************/
+#define WWDG_CR_T ((uint32_t)0x7F) /*!<T[6:0] bits (7-Bit counter (MSB to LSB)) */
+#define WWDG_CR_T0 ((uint32_t)0x01) /*!<Bit 0 */
+#define WWDG_CR_T1 ((uint32_t)0x02) /*!<Bit 1 */
+#define WWDG_CR_T2 ((uint32_t)0x04) /*!<Bit 2 */
+#define WWDG_CR_T3 ((uint32_t)0x08) /*!<Bit 3 */
+#define WWDG_CR_T4 ((uint32_t)0x10) /*!<Bit 4 */
+#define WWDG_CR_T5 ((uint32_t)0x20) /*!<Bit 5 */
+#define WWDG_CR_T6 ((uint32_t)0x40) /*!<Bit 6 */
+
+#define WWDG_CR_WDGA ((uint32_t)0x80) /*!<Activation bit */
+
+/******************* Bit definition for WWDG_CFR register *******************/
+#define WWDG_CFR_W ((uint32_t)0x007F) /*!<W[6:0] bits (7-bit window value) */
+#define WWDG_CFR_W0 ((uint32_t)0x0001) /*!<Bit 0 */
+#define WWDG_CFR_W1 ((uint32_t)0x0002) /*!<Bit 1 */
+#define WWDG_CFR_W2 ((uint32_t)0x0004) /*!<Bit 2 */
+#define WWDG_CFR_W3 ((uint32_t)0x0008) /*!<Bit 3 */
+#define WWDG_CFR_W4 ((uint32_t)0x0010) /*!<Bit 4 */
+#define WWDG_CFR_W5 ((uint32_t)0x0020) /*!<Bit 5 */
+#define WWDG_CFR_W6 ((uint32_t)0x0040) /*!<Bit 6 */
+
+#define WWDG_CFR_WDGTB ((uint32_t)0x0180) /*!<WDGTB[1:0] bits (Timer Base) */
+#define WWDG_CFR_WDGTB0 ((uint32_t)0x0080) /*!<Bit 0 */
+#define WWDG_CFR_WDGTB1 ((uint32_t)0x0100) /*!<Bit 1 */
+
+#define WWDG_CFR_EWI ((uint32_t)0x0200) /*!<Early Wakeup Interrupt */
+
+/******************* Bit definition for WWDG_SR register ********************/
+#define WWDG_SR_EWIF ((uint32_t)0x01) /*!<Early Wakeup Interrupt Flag */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+
+/** @addtogroup Exported_macro
+ * @{
+ */
+
+/****************************** ADC Instances *********************************/
+#define IS_ADC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == ADC1)
+
+#define IS_ADC_COMMON_INSTANCE(INSTANCE) ((INSTANCE) == ADC)
+
+/******************************* CAN Instances ********************************/
+#define IS_CAN_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CAN)
+
+/****************************** COMP Instances *********************************/
+#define IS_COMP_ALL_INSTANCE(INSTANCE) (((INSTANCE) == COMP1) || \
+ ((INSTANCE) == COMP2))
+
+#define IS_COMP_DAC1SWITCH_INSTANCE(INSTANCE) ((INSTANCE) == COMP1)
+
+#define IS_COMP_WINDOWMODE_INSTANCE(INSTANCE) ((INSTANCE) == COMP2)
+
+/****************************** CEC Instances *********************************/
+#define IS_CEC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CEC)
+
+/****************************** CRC Instances *********************************/
+#define IS_CRC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CRC)
+
+/******************************* DAC Instances ********************************/
+#define IS_DAC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == DAC)
+
+/******************************* DMA Instances ******************************/
+#define IS_DMA_ALL_INSTANCE(INSTANCE) (((INSTANCE) == DMA1_Channel1) || \
+ ((INSTANCE) == DMA1_Channel2) || \
+ ((INSTANCE) == DMA1_Channel3) || \
+ ((INSTANCE) == DMA1_Channel4) || \
+ ((INSTANCE) == DMA1_Channel5) || \
+ ((INSTANCE) == DMA1_Channel6) || \
+ ((INSTANCE) == DMA1_Channel7))
+
+/****************************** GPIO Instances ********************************/
+#define IS_GPIO_ALL_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB) || \
+ ((INSTANCE) == GPIOC) || \
+ ((INSTANCE) == GPIOD) || \
+ ((INSTANCE) == GPIOE) || \
+ ((INSTANCE) == GPIOF))
+
+#define IS_GPIO_AF_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB) || \
+ ((INSTANCE) == GPIOC) || \
+ ((INSTANCE) == GPIOD) || \
+ ((INSTANCE) == GPIOE))
+
+#define IS_GPIO_LOCK_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB))
+
+/****************************** I2C Instances *********************************/
+#define IS_I2C_ALL_INSTANCE(INSTANCE) (((INSTANCE) == I2C1) || \
+ ((INSTANCE) == I2C2))
+
+/****************************** I2S Instances *********************************/
+#define IS_I2S_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
+ ((INSTANCE) == SPI2))
+
+/****************************** IWDG Instances ********************************/
+#define IS_IWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == IWDG)
+
+/****************************** RTC Instances *********************************/
+#define IS_RTC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == RTC)
+
+/****************************** SMBUS Instances *********************************/
+#define IS_SMBUS_ALL_INSTANCE(INSTANCE) ((INSTANCE) == I2C1)
+
+/****************************** SPI Instances *********************************/
+#define IS_SPI_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
+ ((INSTANCE) == SPI2))
+
+/****************************** TIM Instances *********************************/
+#define IS_TIM_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM6) || \
+ ((INSTANCE) == TIM7) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CC1_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CC2_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_CC3_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CC4_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_TIX_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_ENCODER_INTERFACE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_HALL_INTERFACE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1))
+
+#define IS_TIM_XOR_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_MASTER_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM6) || \
+ ((INSTANCE) == TIM7) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_SLAVE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_32B_COUNTER_INSTANCE(INSTANCE)\
+ ((INSTANCE) == TIM2)
+
+#define IS_TIM_DMABURST_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_BREAK_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CCX_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM2) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM3) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM14) && \
+ (((CHANNEL) == TIM_CHANNEL_1))) \
+ || \
+ (((INSTANCE) == TIM15) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))) \
+ || \
+ (((INSTANCE) == TIM16) && \
+ (((CHANNEL) == TIM_CHANNEL_1))) \
+ || \
+ (((INSTANCE) == TIM17) && \
+ (((CHANNEL) == TIM_CHANNEL_1))))
+
+#define IS_TIM_CCXN_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3))) \
+ || \
+ (((INSTANCE) == TIM15) && \
+ ((CHANNEL) == TIM_CHANNEL_1)) \
+ || \
+ (((INSTANCE) == TIM16) && \
+ ((CHANNEL) == TIM_CHANNEL_1)) \
+ || \
+ (((INSTANCE) == TIM17) && \
+ ((CHANNEL) == TIM_CHANNEL_1)))
+
+#define IS_TIM_COUNTER_MODE_SELECT_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_REPETITION_COUNTER_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CLOCK_DIVISION_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_DMA_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM6) || \
+ ((INSTANCE) == TIM7) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_DMA_CC_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_COMMUTATION_EVENT_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_REMAP_INSTANCE(INSTANCE)\
+ ((INSTANCE) == TIM14)
+
+/****************************** TSC Instances *********************************/
+#define IS_TSC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == TSC)
+
+/*********************** UART Instances : IRDA mode ***************************/
+#define IS_IRDA_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/********************* UART Instances : Smard card mode ***********************/
+#define IS_SMARTCARD_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/******************** USART Instances : Synchronous mode **********************/
+#define IS_USART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3) || \
+ ((INSTANCE) == USART4))
+
+/******************** USART Instances : auto Baud rate detection **************/
+#define IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/******************** UART Instances : Asynchronous mode **********************/
+#define IS_UART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3) || \
+ ((INSTANCE) == USART4))
+
+/******************** UART Instances : Half-Duplex mode **********************/
+#define IS_UART_HALFDUPLEX_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3) || \
+ ((INSTANCE) == USART4))
+
+/****************** UART Instances : Hardware Flow control ********************/
+#define IS_UART_HWFLOW_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3) || \
+ ((INSTANCE) == USART4))
+
+/****************** UART Instances : LIN mode ********************/
+#define IS_UART_LIN_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/****************** UART Instances : wakeup from stop mode ********************/
+#define IS_UART_WAKEUP_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/****************** UART Instances : Auto Baud Rate detection ********************/
+#define IS_UART_AUTOBAUDRATE_DETECTION_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/****************** UART Instances : Driver enable detection ********************/
+#define IS_UART_DRIVER_ENABLE_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3) || \
+ ((INSTANCE) == USART4))
+
+/****************************** USB Instances ********************************/
+#define IS_USB_ALL_INSTANCE(INSTANCE) ((INSTANCE) == USB)
+
+/****************************** WWDG Instances ********************************/
+#define IS_WWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == WWDG)
+
+/**
+ * @}
+ */
+
+
+/******************************************************************************/
+/* For a painless codes migration between the STM32F0xx device product */
+/* lines, the aliases defined below are put in place to overcome the */
+/* differences in the interrupt handlers and IRQn definitions. */
+/* No need to update developed interrupt code when moving across */
+/* product lines within the same STM32F0 Family */
+/******************************************************************************/
+
+/* Aliases for __IRQn */
+#define PVD_IRQn PVD_VDDIO2_IRQn
+#define VDDIO2_IRQn PVD_VDDIO2_IRQn
+#define RCC_IRQn RCC_CRS_IRQn
+#define DMA1_Channel4_5_IRQn DMA1_Channel4_5_6_7_IRQn
+#define ADC1_IRQn ADC1_COMP_IRQn
+#define TIM6_IRQn TIM6_DAC_IRQn
+
+/* Aliases for __IRQHandler */
+#define PVD_IRQHandler PVD_VDDIO2_IRQHandler
+#define VDDIO2_IRQHandler PVD_VDDIO2_IRQHandler
+#define RCC_IRQHandler RCC_CRS_IRQHandler
+#define DMA1_Channel4_5_IRQHandler DMA1_Channel4_5_6_7_IRQHandler
+#define ADC1_IRQHandler ADC1_COMP_IRQHandler
+#define TIM6_IRQHandler TIM6_DAC_IRQHandler
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F072xB_H */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/include/devices/stm32f078xx.h b/f0/include/devices/stm32f078xx.h
new file mode 100755
index 0000000000000000000000000000000000000000..c7e208e24a1ebf0f8a7390d32c22beba5bbd5e33
--- /dev/null
+++ b/f0/include/devices/stm32f078xx.h
@@ -0,0 +1,5555 @@
+/**
+ ******************************************************************************
+ * @file stm32f078xx.h
+ * @author MCD Application Team
+ * @version V2.2.1
+ * @date 09-January-2015
+ * @brief CMSIS STM32F078xx devices Peripheral Access Layer Header File.
+ *
+ * This file contains:
+ * - Data structures and the address mapping for all peripherals
+ * - Peripheral's registers declarations and bits definition
+ * - Macros to access peripheral’s registers hardware
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS_Device
+ * @{
+ */
+
+/** @addtogroup stm32f078xx
+ * @{
+ */
+
+#ifndef __STM32F078xx_H
+#define __STM32F078xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+
+/**
+ * @brief Configuration of the Cortex-M0 Processor and Core Peripherals
+ */
+#define __CM0_REV 0 /*!< Core Revision r0p0 */
+#define __MPU_PRESENT 0 /*!< STM32F0xx do not provide MPU */
+#define __NVIC_PRIO_BITS 2 /*!< STM32F0xx uses 2 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F078xx device Interrupt Number Definition
+ */
+typedef enum
+{
+/****** Cortex-M0 Processor Exceptions Numbers **************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */
+ SVC_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */
+
+/****** STM32F078xx specific Interrupt Numbers **************************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ VDDIO2_IRQn = 1, /*!< VDDIO2 Interrupt through EXTI Line 31 */
+ RTC_IRQn = 2, /*!< RTC Interrupt through EXTI Lines 17, 19 and 20 */
+ FLASH_IRQn = 3, /*!< FLASH global Interrupt */
+ RCC_CRS_IRQn = 4, /*!< RCC & CRS global Interrupts */
+ EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupts */
+ EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupts */
+ EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupts */
+ TSC_IRQn = 8, /*!< Touch Sensing Controller Interrupts */
+ DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */
+ DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupts */
+ DMA1_Channel4_5_6_7_IRQn = 11, /*!< DMA1 Channel 4 to Channel 7 Interrupts */
+ ADC1_COMP_IRQn = 12, /*!< ADC1 and COMP interrupts (ADC interrupt combined with EXTI Lines 21 and 22 */
+ TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupts */
+ TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 15, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 16, /*!< TIM3 global Interrupt */
+ TIM6_DAC_IRQn = 17, /*!< TIM6 global and DAC channel underrun error Interrupts */
+ TIM7_IRQn = 18, /*!< TIM7 global Interrupt */
+ TIM14_IRQn = 19, /*!< TIM14 global Interrupt */
+ TIM15_IRQn = 20, /*!< TIM15 global Interrupt */
+ TIM16_IRQn = 21, /*!< TIM16 global Interrupt */
+ TIM17_IRQn = 22, /*!< TIM17 global Interrupt */
+ I2C1_IRQn = 23, /*!< I2C1 Event Interrupt & EXTI Line23 Interrupt (I2C1 wakeup) */
+ I2C2_IRQn = 24, /*!< I2C2 Event Interrupt */
+ SPI1_IRQn = 25, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 26, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 27, /*!< USART1 global Interrupt & EXTI Line25 Interrupt (USART1 wakeup) */
+ USART2_IRQn = 28, /*!< USART2 global Interrupt & EXTI Line26 Interrupt (USART2 wakeup) */
+ USART3_4_IRQn = 29, /*!< USART3 and USART4 global Interrupts */
+ CEC_CAN_IRQn = 30, /*!< CEC and CAN global Interrupts & EXTI Line27 Interrupt */
+ USB_IRQn = 31 /*!< USB global Interrupts & EXTI Line18 Interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm0.h" /* Cortex-M0 processor and core peripherals */
+#include "system_stm32f0xx.h" /* STM32F0xx System Header */
+#include <stdint.h>
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< ADC Interrupt and Status register, Address offset:0x00 */
+ __IO uint32_t IER; /*!< ADC Interrupt Enable register, Address offset:0x04 */
+ __IO uint32_t CR; /*!< ADC Control register, Address offset:0x08 */
+ __IO uint32_t CFGR1; /*!< ADC Configuration register 1, Address offset:0x0C */
+ __IO uint32_t CFGR2; /*!< ADC Configuration register 2, Address offset:0x10 */
+ __IO uint32_t SMPR; /*!< ADC Sampling time register, Address offset:0x14 */
+ uint32_t RESERVED1; /*!< Reserved, 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, 0x1C */
+ __IO uint32_t TR; /*!< ADC watchdog threshold register, Address offset:0x20 */
+ uint32_t RESERVED3; /*!< Reserved, 0x24 */
+ __IO uint32_t CHSELR; /*!< ADC channel selection register, Address offset:0x28 */
+ uint32_t RESERVED4[5]; /*!< Reserved, 0x2C */
+ __IO uint32_t DR; /*!< ADC data register, Address offset:0x40 */
+}ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CCR;
+}ADC_Common_TypeDef;
+
+/**
+ * @brief Controller Area Network TxMailBox
+ */
+typedef struct
+{
+ __IO uint32_t TIR; /*!< CAN TX mailbox identifier register */
+ __IO uint32_t TDTR; /*!< CAN mailbox data length control and time stamp register */
+ __IO uint32_t TDLR; /*!< CAN mailbox data low register */
+ __IO uint32_t TDHR; /*!< CAN mailbox data high register */
+}CAN_TxMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FIFOMailBox
+ */
+typedef struct
+{
+ __IO uint32_t RIR; /*!< CAN receive FIFO mailbox identifier register */
+ __IO uint32_t RDTR; /*!< CAN receive FIFO mailbox data length control and time stamp register */
+ __IO uint32_t RDLR; /*!< CAN receive FIFO mailbox data low register */
+ __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */
+}CAN_FIFOMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FilterRegister
+ */
+typedef struct
+{
+ __IO uint32_t FR1; /*!< CAN Filter bank register 1 */
+ __IO uint32_t FR2; /*!< CAN Filter bank register 1 */
+}CAN_FilterRegister_TypeDef;
+
+/**
+ * @brief Controller Area Network
+ */
+typedef struct
+{
+ __IO uint32_t MCR; /*!< CAN master control register, Address offset: 0x00 */
+ __IO uint32_t MSR; /*!< CAN master status register, Address offset: 0x04 */
+ __IO uint32_t TSR; /*!< CAN transmit status register, Address offset: 0x08 */
+ __IO uint32_t RF0R; /*!< CAN receive FIFO 0 register, Address offset: 0x0C */
+ __IO uint32_t RF1R; /*!< CAN receive FIFO 1 register, Address offset: 0x10 */
+ __IO uint32_t IER; /*!< CAN interrupt enable register, Address offset: 0x14 */
+ __IO uint32_t ESR; /*!< CAN error status register, Address offset: 0x18 */
+ __IO uint32_t BTR; /*!< CAN bit timing register, Address offset: 0x1C */
+ uint32_t RESERVED0[88]; /*!< Reserved, 0x020 - 0x17F */
+ CAN_TxMailBox_TypeDef sTxMailBox[3]; /*!< CAN Tx MailBox, Address offset: 0x180 - 0x1AC */
+ CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; /*!< CAN FIFO MailBox, Address offset: 0x1B0 - 0x1CC */
+ uint32_t RESERVED1[12]; /*!< Reserved, 0x1D0 - 0x1FF */
+ __IO uint32_t FMR; /*!< CAN filter master register, Address offset: 0x200 */
+ __IO uint32_t FM1R; /*!< CAN filter mode register, Address offset: 0x204 */
+ uint32_t RESERVED2; /*!< Reserved, 0x208 */
+ __IO uint32_t FS1R; /*!< CAN filter scale register, Address offset: 0x20C */
+ uint32_t RESERVED3; /*!< Reserved, 0x210 */
+ __IO uint32_t FFA1R; /*!< CAN filter FIFO assignment register, Address offset: 0x214 */
+ uint32_t RESERVED4; /*!< Reserved, 0x218 */
+ __IO uint32_t FA1R; /*!< CAN filter activation register, Address offset: 0x21C */
+ uint32_t RESERVED5[8]; /*!< Reserved, 0x220-0x23F */
+ CAN_FilterRegister_TypeDef sFilterRegister[28]; /*!< CAN Filter Register, Address offset: 0x240-0x31C */
+}CAN_TypeDef;
+
+/**
+ * @brief HDMI-CEC
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< CEC control register, Address offset:0x00 */
+ __IO uint32_t CFGR; /*!< CEC configuration register, Address offset:0x04 */
+ __IO uint32_t TXDR; /*!< CEC Tx data register , Address offset:0x08 */
+ __IO uint32_t RXDR; /*!< CEC Rx Data Register, Address offset:0x0C */
+ __IO uint32_t ISR; /*!< CEC Interrupt and Status Register, Address offset:0x10 */
+ __IO uint32_t IER; /*!< CEC interrupt enable register, Address offset:0x14 */
+}CEC_TypeDef;
+
+/**
+ * @brief Comparator
+ */
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< Comparator 1 & 2 control Status register, Address offset: 0x00 */
+}COMP1_2_TypeDef;
+
+typedef struct
+{
+ __IO uint16_t CSR; /*!< Comparator control Status register, Address offset: 0x00 */
+}COMP_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+ uint32_t RESERVED2; /*!< Reserved, 0x0C */
+ __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */
+ __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */
+}CRC_TypeDef;
+
+/**
+ * @brief Clock Recovery System
+ */
+typedef struct
+{
+__IO uint32_t CR; /*!< CRS ccontrol register, Address offset: 0x00 */
+__IO uint32_t CFGR; /*!< CRS configuration register, Address offset: 0x04 */
+__IO uint32_t ISR; /*!< CRS interrupt and status register, Address offset: 0x08 */
+__IO uint32_t ICR; /*!< CRS interrupt flag clear register, Address offset: 0x0C */
+}CRS_TypeDef;
+
+/**
+ * @brief Digital to Analog Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */
+ __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */
+ __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */
+ __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */
+ __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */
+ __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */
+ __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */
+ __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */
+ __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */
+ __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */
+ __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */
+ __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */
+ __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */
+ __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */
+}DAC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< DMA channel x configuration register */
+ __IO uint32_t CNDTR; /*!< DMA channel x number of data register */
+ __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */
+ __IO uint32_t CMAR; /*!< DMA channel x memory address register */
+}DMA_Channel_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */
+ __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */
+}DMA_TypeDef;
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!<EXTI Interrupt mask register, Address offset: 0x00 */
+ __IO uint32_t EMR; /*!<EXTI Event mask register, Address offset: 0x04 */
+ __IO uint32_t RTSR; /*!<EXTI Rising trigger selection register , Address offset: 0x08 */
+ __IO uint32_t FTSR; /*!<EXTI Falling trigger selection register, Address offset: 0x0C */
+ __IO uint32_t SWIER; /*!<EXTI Software interrupt event register, Address offset: 0x10 */
+ __IO uint32_t PR; /*!<EXTI Pending register, Address offset: 0x14 */
+}EXTI_TypeDef;
+
+/**
+ * @brief FLASH Registers
+ */
+typedef struct
+{
+ __IO uint32_t ACR; /*!<FLASH access control register, Address offset: 0x00 */
+ __IO uint32_t KEYR; /*!<FLASH key register, Address offset: 0x04 */
+ __IO uint32_t OPTKEYR; /*!<FLASH OPT key register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!<FLASH status register, Address offset: 0x0C */
+ __IO uint32_t CR; /*!<FLASH control register, Address offset: 0x10 */
+ __IO uint32_t AR; /*!<FLASH address register, Address offset: 0x14 */
+ __IO uint32_t RESERVED; /*!< Reserved, 0x18 */
+ __IO uint32_t OBR; /*!<FLASH option bytes register, Address offset: 0x1C */
+ __IO uint32_t WRPR; /*!<FLASH option bytes register, Address offset: 0x20 */
+}FLASH_TypeDef;
+
+
+/**
+ * @brief Option Bytes Registers
+ */
+typedef struct
+{
+ __IO uint16_t RDP; /*!< FLASH option byte Read protection, Address offset: 0x00 */
+ __IO uint16_t USER; /*!< FLASH option byte user options, Address offset: 0x02 */
+ __IO uint16_t DATA0; /*!< User data byte 0 (stored in FLASH_OBR[23:16]), Address offset: 0x04 */
+ __IO uint16_t DATA1; /*!< User data byte 1 (stored in FLASH_OBR[31:24]), Address offset: 0x06 */
+ __IO uint16_t WRP0; /*!< FLASH option byte write protection 0, Address offset: 0x08 */
+ __IO uint16_t WRP1; /*!< FLASH option byte write protection 1, Address offset: 0x0A */
+ __IO uint16_t WRP2; /*!< FLASH option byte write protection 2, Address offset: 0x0C */
+ __IO uint16_t WRP3; /*!< FLASH option byte write protection 3, Address offset: 0x0E */
+}OB_TypeDef;
+
+/**
+ * @brief General Purpose I/O
+ */
+
+typedef struct
+{
+ __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */
+ __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */
+ __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */
+ __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */
+ __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */
+ __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */
+ __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x1A */
+ __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */
+ __IO uint32_t AFR[2]; /*!< GPIO alternate function low register, Address offset: 0x20-0x24 */
+ __IO uint32_t BRR; /*!< GPIO bit reset register, Address offset: 0x28 */
+}GPIO_TypeDef;
+
+/**
+ * @brief SysTem Configuration
+ */
+
+typedef struct
+{
+ __IO uint32_t CFGR1; /*!< SYSCFG configuration register 1, Address offset: 0x00 */
+ uint32_t RESERVED; /*!< Reserved, 0x04 */
+ __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration register, Address offset: 0x14-0x08 */
+ __IO uint32_t CFGR2; /*!< SYSCFG configuration register 2, Address offset: 0x18 */
+}SYSCFG_TypeDef;
+
+/**
+ * @brief Inter-integrated Circuit Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */
+ __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */
+ __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */
+ __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */
+ __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */
+ __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */
+ __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */
+ __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */
+ __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */
+ __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */
+}I2C_TypeDef;
+
+/**
+ * @brief Independent WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */
+ __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */
+ __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */
+ __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */
+}IWDG_TypeDef;
+
+/**
+ * @brief Power Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< PWR power control register, Address offset: 0x00 */
+ __IO uint32_t CSR; /*!< PWR power control/status register, Address offset: 0x04 */
+}PWR_TypeDef;
+
+/**
+ * @brief Reset and Clock Control
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */
+ __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x04 */
+ __IO uint32_t CIR; /*!< RCC clock interrupt register, Address offset: 0x08 */
+ __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x0C */
+ __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x10 */
+ __IO uint32_t AHBENR; /*!< RCC AHB peripheral clock register, Address offset: 0x14 */
+ __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x18 */
+ __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x1C */
+ __IO uint32_t BDCR; /*!< RCC Backup domain control register, Address offset: 0x20 */
+ __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x24 */
+ __IO uint32_t AHBRSTR; /*!< RCC AHB peripheral reset register, Address offset: 0x28 */
+ __IO uint32_t CFGR2; /*!< RCC clock configuration register 2, Address offset: 0x2C */
+ __IO uint32_t CFGR3; /*!< RCC clock configuration register 3, Address offset: 0x30 */
+ __IO uint32_t CR2; /*!< RCC clock control register 2, Address offset: 0x34 */
+}RCC_TypeDef;
+
+/**
+ * @brief Real-Time Clock
+ */
+
+typedef struct
+{
+ __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */
+ __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */
+ __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */
+ uint32_t RESERVED1; /*!< Reserved, Address offset: 0x18 */
+ __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */
+ uint32_t RESERVED2; /*!< Reserved, Address offset: 0x20 */
+ __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */
+ __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */
+ __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */
+ __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */
+ __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */
+ __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */
+ __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */
+ __IO uint32_t TAFCR; /*!< RTC tamper and alternate function configuration register, Address offset: 0x40 */
+ __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */
+ uint32_t RESERVED3; /*!< Reserved, Address offset: 0x48 */
+ uint32_t RESERVED4; /*!< Reserved, Address offset: 0x4C */
+ __IO uint32_t BKP0R; /*!< RTC backup register 0, Address offset: 0x50 */
+ __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */
+ __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */
+ __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */
+ __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */
+}RTC_TypeDef;
+
+/**
+ * @brief Serial Peripheral Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< SPI Control register 1 (not used in I2S mode), Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */
+ __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */
+ __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */
+ __IO uint32_t RXCRCR; /*!< SPI Rx CRC register (not used in I2S mode), Address offset: 0x14 */
+ __IO uint32_t TXCRCR; /*!< SPI Tx CRC register (not used in I2S mode), Address offset: 0x18 */
+ __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */
+ __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */
+}SPI_TypeDef;
+
+/**
+ * @brief TIM
+ */
+typedef struct
+{
+ __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */
+ __IO uint32_t SMCR; /*!< TIM slave Mode Control register, Address offset: 0x08 */
+ __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */
+ __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */
+ __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */
+ __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */
+ __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */
+ __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */
+ __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */
+ __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */
+ __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */
+ __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */
+ __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */
+ __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */
+ __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */
+ __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */
+ __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */
+ __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */
+ __IO uint32_t DMAR; /*!< TIM DMA address for full transfer register, Address offset: 0x4C */
+ __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */
+}TIM_TypeDef;
+
+/**
+ * @brief Touch Sensing Controller (TSC)
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< TSC control register, Address offset: 0x00 */
+ __IO uint32_t IER; /*!< TSC interrupt enable register, Address offset: 0x04 */
+ __IO uint32_t ICR; /*!< TSC interrupt clear register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< TSC interrupt status register, Address offset: 0x0C */
+ __IO uint32_t IOHCR; /*!< TSC I/O hysteresis control register, Address offset: 0x10 */
+ uint32_t RESERVED1; /*!< Reserved, Address offset: 0x14 */
+ __IO uint32_t IOASCR; /*!< TSC I/O analog switch control register, Address offset: 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, Address offset: 0x1C */
+ __IO uint32_t IOSCR; /*!< TSC I/O sampling control register, Address offset: 0x20 */
+ uint32_t RESERVED3; /*!< Reserved, Address offset: 0x24 */
+ __IO uint32_t IOCCR; /*!< TSC I/O channel control register, Address offset: 0x28 */
+ uint32_t RESERVED4; /*!< Reserved, Address offset: 0x2C */
+ __IO uint32_t IOGCSR; /*!< TSC I/O group control status register, Address offset: 0x30 */
+ __IO uint32_t IOGXCR[8]; /*!< TSC I/O group x counter register, Address offset: 0x34-50 */
+}TSC_TypeDef;
+
+/**
+ * @brief Universal Synchronous Asynchronous Receiver Transmitter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */
+ __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */
+ __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */
+ __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */
+ __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */
+ __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */
+ __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */
+ __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */
+ __IO uint16_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */
+ uint16_t RESERVED1; /*!< Reserved, 0x26 */
+ __IO uint16_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */
+ uint16_t RESERVED2; /*!< Reserved, 0x2A */
+}USART_TypeDef;
+
+/**
+ * @brief Universal Serial Bus Full Speed Device
+ */
+
+typedef struct
+{
+ __IO uint16_t EP0R; /*!< USB Endpoint 0 register, Address offset: 0x00 */
+ __IO uint16_t RESERVED0; /*!< Reserved */
+ __IO uint16_t EP1R; /*!< USB Endpoint 1 register, Address offset: 0x04 */
+ __IO uint16_t RESERVED1; /*!< Reserved */
+ __IO uint16_t EP2R; /*!< USB Endpoint 2 register, Address offset: 0x08 */
+ __IO uint16_t RESERVED2; /*!< Reserved */
+ __IO uint16_t EP3R; /*!< USB Endpoint 3 register, Address offset: 0x0C */
+ __IO uint16_t RESERVED3; /*!< Reserved */
+ __IO uint16_t EP4R; /*!< USB Endpoint 4 register, Address offset: 0x10 */
+ __IO uint16_t RESERVED4; /*!< Reserved */
+ __IO uint16_t EP5R; /*!< USB Endpoint 5 register, Address offset: 0x14 */
+ __IO uint16_t RESERVED5; /*!< Reserved */
+ __IO uint16_t EP6R; /*!< USB Endpoint 6 register, Address offset: 0x18 */
+ __IO uint16_t RESERVED6; /*!< Reserved */
+ __IO uint16_t EP7R; /*!< USB Endpoint 7 register, Address offset: 0x1C */
+ __IO uint16_t RESERVED7[17]; /*!< Reserved */
+ __IO uint16_t CNTR; /*!< Control register, Address offset: 0x40 */
+ __IO uint16_t RESERVED8; /*!< Reserved */
+ __IO uint16_t ISTR; /*!< Interrupt status register, Address offset: 0x44 */
+ __IO uint16_t RESERVED9; /*!< Reserved */
+ __IO uint16_t FNR; /*!< Frame number register, Address offset: 0x48 */
+ __IO uint16_t RESERVEDA; /*!< Reserved */
+ __IO uint16_t DADDR; /*!< Device address register, Address offset: 0x4C */
+ __IO uint16_t RESERVEDB; /*!< Reserved */
+ __IO uint16_t BTABLE; /*!< Buffer Table address register, Address offset: 0x50 */
+ __IO uint16_t RESERVEDC; /*!< Reserved */
+ __IO uint16_t LPMCSR; /*!< LPM Control and Status register, Address offset: 0x54 */
+ __IO uint16_t RESERVEDD; /*!< Reserved */
+ __IO uint16_t BCDR; /*!< Battery Charging detector register, Address offset: 0x58 */
+ __IO uint16_t RESERVEDE; /*!< Reserved */
+}USB_TypeDef;
+
+/**
+ * @brief Window WATCHDOG
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */
+ __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */
+}WWDG_TypeDef;
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_memory_map
+ * @{
+ */
+
+#define FLASH_BASE ((uint32_t)0x08000000) /*!< FLASH base address in the alias region */
+#define SRAM_BASE ((uint32_t)0x20000000) /*!< SRAM base address in the alias region */
+#define PERIPH_BASE ((uint32_t)0x40000000) /*!< Peripheral base address in the alias region */
+
+/*!< Peripheral memory map */
+#define APBPERIPH_BASE PERIPH_BASE
+#define AHBPERIPH_BASE (PERIPH_BASE + 0x00020000)
+#define AHB2PERIPH_BASE (PERIPH_BASE + 0x08000000)
+
+#define TIM2_BASE (APBPERIPH_BASE + 0x00000000)
+#define TIM3_BASE (APBPERIPH_BASE + 0x00000400)
+#define TIM6_BASE (APBPERIPH_BASE + 0x00001000)
+#define TIM7_BASE (APBPERIPH_BASE + 0x00001400)
+#define TIM14_BASE (APBPERIPH_BASE + 0x00002000)
+#define RTC_BASE (APBPERIPH_BASE + 0x00002800)
+#define WWDG_BASE (APBPERIPH_BASE + 0x00002C00)
+#define IWDG_BASE (APBPERIPH_BASE + 0x00003000)
+#define SPI2_BASE (APBPERIPH_BASE + 0x00003800)
+#define USART2_BASE (APBPERIPH_BASE + 0x00004400)
+#define USART3_BASE (APBPERIPH_BASE + 0x00004800)
+#define USART4_BASE (APBPERIPH_BASE + 0x00004C00)
+#define I2C1_BASE (APBPERIPH_BASE + 0x00005400)
+#define I2C2_BASE (APBPERIPH_BASE + 0x00005800)
+#define USB_BASE (APBPERIPH_BASE + 0x00005C00) /*!< USB_IP Peripheral Registers base address */
+#define USB_PMAADDR (APBPERIPH_BASE + 0x00006000) /*!< USB_IP Packet Memory Area base address */
+#define CAN_BASE (APBPERIPH_BASE + 0x00006400)
+#define CRS_BASE (APBPERIPH_BASE + 0x00006C00)
+#define PWR_BASE (APBPERIPH_BASE + 0x00007000)
+#define DAC_BASE (APBPERIPH_BASE + 0x00007400)
+#define CEC_BASE (APBPERIPH_BASE + 0x00007800)
+
+#define SYSCFG_BASE (APBPERIPH_BASE + 0x00010000)
+#define COMP_BASE (APBPERIPH_BASE + 0x0001001C)
+#define EXTI_BASE (APBPERIPH_BASE + 0x00010400)
+#define ADC1_BASE (APBPERIPH_BASE + 0x00012400)
+#define ADC_BASE (APBPERIPH_BASE + 0x00012708)
+#define TIM1_BASE (APBPERIPH_BASE + 0x00012C00)
+#define SPI1_BASE (APBPERIPH_BASE + 0x00013000)
+#define USART1_BASE (APBPERIPH_BASE + 0x00013800)
+#define TIM15_BASE (APBPERIPH_BASE + 0x00014000)
+#define TIM16_BASE (APBPERIPH_BASE + 0x00014400)
+#define TIM17_BASE (APBPERIPH_BASE + 0x00014800)
+#define DBGMCU_BASE (APBPERIPH_BASE + 0x00015800)
+
+#define DMA1_BASE (AHBPERIPH_BASE + 0x00000000)
+#define DMA1_Channel1_BASE (DMA1_BASE + 0x00000008)
+#define DMA1_Channel2_BASE (DMA1_BASE + 0x0000001C)
+#define DMA1_Channel3_BASE (DMA1_BASE + 0x00000030)
+#define DMA1_Channel4_BASE (DMA1_BASE + 0x00000044)
+#define DMA1_Channel5_BASE (DMA1_BASE + 0x00000058)
+#define DMA1_Channel6_BASE (DMA1_BASE + 0x0000006C)
+#define DMA1_Channel7_BASE (DMA1_BASE + 0x00000080)
+
+#define RCC_BASE (AHBPERIPH_BASE + 0x00001000)
+#define FLASH_R_BASE (AHBPERIPH_BASE + 0x00002000) /*!< FLASH registers base address */
+#define OB_BASE ((uint32_t)0x1FFFF800) /*!< FLASH Option Bytes base address */
+#define CRC_BASE (AHBPERIPH_BASE + 0x00003000)
+#define TSC_BASE (AHBPERIPH_BASE + 0x00004000)
+
+#define GPIOA_BASE (AHB2PERIPH_BASE + 0x00000000)
+#define GPIOB_BASE (AHB2PERIPH_BASE + 0x00000400)
+#define GPIOC_BASE (AHB2PERIPH_BASE + 0x00000800)
+#define GPIOD_BASE (AHB2PERIPH_BASE + 0x00000C00)
+#define GPIOE_BASE (AHB2PERIPH_BASE + 0x00001000)
+#define GPIOF_BASE (AHB2PERIPH_BASE + 0x00001400)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_declaration
+ * @{
+ */
+
+#define TIM2 ((TIM_TypeDef *) TIM2_BASE)
+#define TIM3 ((TIM_TypeDef *) TIM3_BASE)
+#define TIM6 ((TIM_TypeDef *) TIM6_BASE)
+#define TIM7 ((TIM_TypeDef *) TIM7_BASE)
+#define TIM14 ((TIM_TypeDef *) TIM14_BASE)
+#define RTC ((RTC_TypeDef *) RTC_BASE)
+#define WWDG ((WWDG_TypeDef *) WWDG_BASE)
+#define IWDG ((IWDG_TypeDef *) IWDG_BASE)
+#define SPI2 ((SPI_TypeDef *) SPI2_BASE)
+#define USART2 ((USART_TypeDef *) USART2_BASE)
+#define USART3 ((USART_TypeDef *) USART3_BASE)
+#define USART4 ((USART_TypeDef *) USART4_BASE)
+#define I2C1 ((I2C_TypeDef *) I2C1_BASE)
+#define I2C2 ((I2C_TypeDef *) I2C2_BASE)
+#define CAN ((CAN_TypeDef *) CAN_BASE)
+#define CRS ((CRS_TypeDef *) CRS_BASE)
+#define PWR ((PWR_TypeDef *) PWR_BASE)
+#define DAC ((DAC_TypeDef *) DAC_BASE)
+#define CEC ((CEC_TypeDef *) CEC_BASE)
+#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE)
+#define COMP ((COMP1_2_TypeDef *) COMP_BASE)
+#define COMP1 ((COMP_TypeDef *) COMP_BASE)
+#define COMP2 ((COMP_TypeDef *) (COMP_BASE + 0x00000002))
+#define EXTI ((EXTI_TypeDef *) EXTI_BASE)
+#define ADC1 ((ADC_TypeDef *) ADC1_BASE)
+#define ADC ((ADC_Common_TypeDef *) ADC_BASE)
+#define TIM1 ((TIM_TypeDef *) TIM1_BASE)
+#define SPI1 ((SPI_TypeDef *) SPI1_BASE)
+#define USART1 ((USART_TypeDef *) USART1_BASE)
+#define TIM15 ((TIM_TypeDef *) TIM15_BASE)
+#define TIM16 ((TIM_TypeDef *) TIM16_BASE)
+#define TIM17 ((TIM_TypeDef *) TIM17_BASE)
+#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE)
+#define DMA1 ((DMA_TypeDef *) DMA1_BASE)
+#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE)
+#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE)
+#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE)
+#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE)
+#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE)
+#define DMA1_Channel6 ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE)
+#define DMA1_Channel7 ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE)
+#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE)
+#define OB ((OB_TypeDef *) OB_BASE)
+#define RCC ((RCC_TypeDef *) RCC_BASE)
+#define CRC ((CRC_TypeDef *) CRC_BASE)
+#define TSC ((TSC_TypeDef *) TSC_BASE)
+#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE)
+#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE)
+#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE)
+#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE)
+#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE)
+#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE)
+#define USB ((USB_TypeDef *) USB_BASE)
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_constants
+ * @{
+ */
+
+ /** @addtogroup Peripheral_Registers_Bits_Definition
+ * @{
+ */
+
+/******************************************************************************/
+/* Peripheral Registers Bits Definition */
+/******************************************************************************/
+/******************************************************************************/
+/* */
+/* Analog to Digital Converter (ADC) */
+/* */
+/******************************************************************************/
+/******************** Bits definition for ADC_ISR register ******************/
+#define ADC_ISR_AWD ((uint32_t)0x00000080) /*!< Analog watchdog flag */
+#define ADC_ISR_OVR ((uint32_t)0x00000010) /*!< Overrun flag */
+#define ADC_ISR_EOSEQ ((uint32_t)0x00000008) /*!< End of Sequence flag */
+#define ADC_ISR_EOC ((uint32_t)0x00000004) /*!< End of Conversion */
+#define ADC_ISR_EOSMP ((uint32_t)0x00000002) /*!< End of sampling flag */
+#define ADC_ISR_ADRDY ((uint32_t)0x00000001) /*!< ADC Ready */
+
+/* Old EOSEQ bit definition, maintained for legacy purpose */
+#define ADC_ISR_EOS ADC_ISR_EOSEQ
+
+/******************** Bits definition for ADC_IER register ******************/
+#define ADC_IER_AWDIE ((uint32_t)0x00000080) /*!< Analog Watchdog interrupt enable */
+#define ADC_IER_OVRIE ((uint32_t)0x00000010) /*!< Overrun interrupt enable */
+#define ADC_IER_EOSEQIE ((uint32_t)0x00000008) /*!< End of Sequence of conversion interrupt enable */
+#define ADC_IER_EOCIE ((uint32_t)0x00000004) /*!< End of Conversion interrupt enable */
+#define ADC_IER_EOSMPIE ((uint32_t)0x00000002) /*!< End of sampling interrupt enable */
+#define ADC_IER_ADRDYIE ((uint32_t)0x00000001) /*!< ADC Ready interrupt enable */
+
+/* Old EOSEQIE bit definition, maintained for legacy purpose */
+#define ADC_IER_EOSIE ADC_IER_EOSEQIE
+
+/******************** Bits definition for ADC_CR register *******************/
+#define ADC_CR_ADCAL ((uint32_t)0x80000000) /*!< ADC calibration */
+#define ADC_CR_ADSTP ((uint32_t)0x00000010) /*!< ADC stop of conversion command */
+#define ADC_CR_ADSTART ((uint32_t)0x00000004) /*!< ADC start of conversion */
+#define ADC_CR_ADDIS ((uint32_t)0x00000002) /*!< ADC disable command */
+#define ADC_CR_ADEN ((uint32_t)0x00000001) /*!< ADC enable control */
+
+/******************* Bits definition for ADC_CFGR1 register *****************/
+#define ADC_CFGR1_AWDCH ((uint32_t)0x7C000000) /*!< AWDCH[4:0] bits (Analog watchdog channel select bits) */
+#define ADC_CFGR1_AWDCH_0 ((uint32_t)0x04000000) /*!< Bit 0 */
+#define ADC_CFGR1_AWDCH_1 ((uint32_t)0x08000000) /*!< Bit 1 */
+#define ADC_CFGR1_AWDCH_2 ((uint32_t)0x10000000) /*!< Bit 2 */
+#define ADC_CFGR1_AWDCH_3 ((uint32_t)0x20000000) /*!< Bit 3 */
+#define ADC_CFGR1_AWDCH_4 ((uint32_t)0x40000000) /*!< Bit 4 */
+#define ADC_CFGR1_AWDEN ((uint32_t)0x00800000) /*!< Analog watchdog enable on regular channels */
+#define ADC_CFGR1_AWDSGL ((uint32_t)0x00400000) /*!< Enable the watchdog on a single channel or on all channels */
+#define ADC_CFGR1_DISCEN ((uint32_t)0x00010000) /*!< Discontinuous mode on regular channels */
+#define ADC_CFGR1_AUTOFF ((uint32_t)0x00008000) /*!< ADC auto power off */
+#define ADC_CFGR1_WAIT ((uint32_t)0x00004000) /*!< ADC wait conversion mode */
+#define ADC_CFGR1_CONT ((uint32_t)0x00002000) /*!< Continuous Conversion */
+#define ADC_CFGR1_OVRMOD ((uint32_t)0x00001000) /*!< Overrun mode */
+#define ADC_CFGR1_EXTEN ((uint32_t)0x00000C00) /*!< EXTEN[1:0] bits (External Trigger Conversion mode for regular channels) */
+#define ADC_CFGR1_EXTEN_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define ADC_CFGR1_EXTEN_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define ADC_CFGR1_EXTSEL ((uint32_t)0x000001C0) /*!< EXTSEL[2:0] bits (External Event Select for regular group) */
+#define ADC_CFGR1_EXTSEL_0 ((uint32_t)0x00000040) /*!< Bit 0 */
+#define ADC_CFGR1_EXTSEL_1 ((uint32_t)0x00000080) /*!< Bit 1 */
+#define ADC_CFGR1_EXTSEL_2 ((uint32_t)0x00000100) /*!< Bit 2 */
+#define ADC_CFGR1_ALIGN ((uint32_t)0x00000020) /*!< Data Alignment */
+#define ADC_CFGR1_RES ((uint32_t)0x00000018) /*!< RES[1:0] bits (Resolution) */
+#define ADC_CFGR1_RES_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define ADC_CFGR1_RES_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define ADC_CFGR1_SCANDIR ((uint32_t)0x00000004) /*!< Sequence scan direction */
+#define ADC_CFGR1_DMACFG ((uint32_t)0x00000002) /*!< Direct memory access configuration */
+#define ADC_CFGR1_DMAEN ((uint32_t)0x00000001) /*!< Direct memory access enable */
+
+/* Old WAIT bit definition, maintained for legacy purpose */
+#define ADC_CFGR1_AUTDLY ADC_CFGR1_WAIT
+
+/******************* Bits definition for ADC_CFGR2 register *****************/
+#define ADC_CFGR2_CKMODE ((uint32_t)0xC0000000) /*!< ADC clock mode */
+#define ADC_CFGR2_CKMODE_1 ((uint32_t)0x80000000) /*!< ADC clocked by PCLK div4 */
+#define ADC_CFGR2_CKMODE_0 ((uint32_t)0x40000000) /*!< ADC clocked by PCLK div2 */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_CFGR2_JITOFFDIV4 ADC_CFGR2_CKMODE_1 /*!< ADC clocked by PCLK div4 */
+#define ADC_CFGR2_JITOFFDIV2 ADC_CFGR2_CKMODE_0 /*!< ADC clocked by PCLK div2 */
+
+/****************** Bit definition for ADC_SMPR register ********************/
+#define ADC_SMPR_SMP ((uint32_t)0x00000007) /*!< SMP[2:0] bits (Sampling time selection) */
+#define ADC_SMPR_SMP_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define ADC_SMPR_SMP_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define ADC_SMPR_SMP_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_SMPR1_SMPR ADC_SMPR_SMP /*!< SMP[2:0] bits (Sampling time selection) */
+#define ADC_SMPR1_SMPR_0 ADC_SMPR_SMP_0 /*!< Bit 0 */
+#define ADC_SMPR1_SMPR_1 ADC_SMPR_SMP_1 /*!< Bit 1 */
+#define ADC_SMPR1_SMPR_2 ADC_SMPR_SMP_2 /*!< Bit 2 */
+
+/******************* Bit definition for ADC_TR register ********************/
+#define ADC_TR_HT ((uint32_t)0x0FFF0000) /*!< Analog watchdog high threshold */
+#define ADC_TR_LT ((uint32_t)0x00000FFF) /*!< Analog watchdog low threshold */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_HTR_HT ADC_TR_HT /*!< Analog watchdog high threshold */
+#define ADC_LTR_LT ADC_TR_LT /*!< Analog watchdog low threshold */
+
+/****************** Bit definition for ADC_CHSELR register ******************/
+#define ADC_CHSELR_CHSEL18 ((uint32_t)0x00040000) /*!< Channel 18 selection */
+#define ADC_CHSELR_CHSEL17 ((uint32_t)0x00020000) /*!< Channel 17 selection */
+#define ADC_CHSELR_CHSEL16 ((uint32_t)0x00010000) /*!< Channel 16 selection */
+#define ADC_CHSELR_CHSEL15 ((uint32_t)0x00008000) /*!< Channel 15 selection */
+#define ADC_CHSELR_CHSEL14 ((uint32_t)0x00004000) /*!< Channel 14 selection */
+#define ADC_CHSELR_CHSEL13 ((uint32_t)0x00002000) /*!< Channel 13 selection */
+#define ADC_CHSELR_CHSEL12 ((uint32_t)0x00001000) /*!< Channel 12 selection */
+#define ADC_CHSELR_CHSEL11 ((uint32_t)0x00000800) /*!< Channel 11 selection */
+#define ADC_CHSELR_CHSEL10 ((uint32_t)0x00000400) /*!< Channel 10 selection */
+#define ADC_CHSELR_CHSEL9 ((uint32_t)0x00000200) /*!< Channel 9 selection */
+#define ADC_CHSELR_CHSEL8 ((uint32_t)0x00000100) /*!< Channel 8 selection */
+#define ADC_CHSELR_CHSEL7 ((uint32_t)0x00000080) /*!< Channel 7 selection */
+#define ADC_CHSELR_CHSEL6 ((uint32_t)0x00000040) /*!< Channel 6 selection */
+#define ADC_CHSELR_CHSEL5 ((uint32_t)0x00000020) /*!< Channel 5 selection */
+#define ADC_CHSELR_CHSEL4 ((uint32_t)0x00000010) /*!< Channel 4 selection */
+#define ADC_CHSELR_CHSEL3 ((uint32_t)0x00000008) /*!< Channel 3 selection */
+#define ADC_CHSELR_CHSEL2 ((uint32_t)0x00000004) /*!< Channel 2 selection */
+#define ADC_CHSELR_CHSEL1 ((uint32_t)0x00000002) /*!< Channel 1 selection */
+#define ADC_CHSELR_CHSEL0 ((uint32_t)0x00000001) /*!< Channel 0 selection */
+
+/******************** Bit definition for ADC_DR register ********************/
+#define ADC_DR_DATA ((uint32_t)0x0000FFFF) /*!< Regular data */
+
+/******************* Bit definition for ADC_CCR register ********************/
+#define ADC_CCR_VBATEN ((uint32_t)0x01000000) /*!< Voltage battery enable */
+#define ADC_CCR_TSEN ((uint32_t)0x00800000) /*!< Tempurature sensore enable */
+#define ADC_CCR_VREFEN ((uint32_t)0x00400000) /*!< Vrefint enable */
+
+/******************************************************************************/
+/* */
+/* Controller Area Network (CAN ) */
+/* */
+/******************************************************************************/
+/*!<CAN control and status registers */
+/******************* Bit definition for CAN_MCR register ********************/
+#define CAN_MCR_INRQ ((uint32_t)0x00000001) /*!<Initialization Request */
+#define CAN_MCR_SLEEP ((uint32_t)0x00000002) /*!<Sleep Mode Request */
+#define CAN_MCR_TXFP ((uint32_t)0x00000004) /*!<Transmit FIFO Priority */
+#define CAN_MCR_RFLM ((uint32_t)0x00000008) /*!<Receive FIFO Locked Mode */
+#define CAN_MCR_NART ((uint32_t)0x00000010) /*!<No Automatic Retransmission */
+#define CAN_MCR_AWUM ((uint32_t)0x00000020) /*!<Automatic Wakeup Mode */
+#define CAN_MCR_ABOM ((uint32_t)0x00000040) /*!<Automatic Bus-Off Management */
+#define CAN_MCR_TTCM ((uint32_t)0x00000080) /*!<Time Triggered Communication Mode */
+#define CAN_MCR_RESET ((uint32_t)0x00008000) /*!<bxCAN software master reset */
+
+/******************* Bit definition for CAN_MSR register ********************/
+#define CAN_MSR_INAK ((uint32_t)0x00000001) /*!<Initialization Acknowledge */
+#define CAN_MSR_SLAK ((uint32_t)0x00000002) /*!<Sleep Acknowledge */
+#define CAN_MSR_ERRI ((uint32_t)0x00000004) /*!<Error Interrupt */
+#define CAN_MSR_WKUI ((uint32_t)0x00000008) /*!<Wakeup Interrupt */
+#define CAN_MSR_SLAKI ((uint32_t)0x00000010) /*!<Sleep Acknowledge Interrupt */
+#define CAN_MSR_TXM ((uint32_t)0x00000100) /*!<Transmit Mode */
+#define CAN_MSR_RXM ((uint32_t)0x00000200) /*!<Receive Mode */
+#define CAN_MSR_SAMP ((uint32_t)0x00000400) /*!<Last Sample Point */
+#define CAN_MSR_RX ((uint32_t)0x00000800) /*!<CAN Rx Signal */
+
+/******************* Bit definition for CAN_TSR register ********************/
+#define CAN_TSR_RQCP0 ((uint32_t)0x00000001) /*!<Request Completed Mailbox0 */
+#define CAN_TSR_TXOK0 ((uint32_t)0x00000002) /*!<Transmission OK of Mailbox0 */
+#define CAN_TSR_ALST0 ((uint32_t)0x00000004) /*!<Arbitration Lost for Mailbox0 */
+#define CAN_TSR_TERR0 ((uint32_t)0x00000008) /*!<Transmission Error of Mailbox0 */
+#define CAN_TSR_ABRQ0 ((uint32_t)0x00000080) /*!<Abort Request for Mailbox0 */
+#define CAN_TSR_RQCP1 ((uint32_t)0x00000100) /*!<Request Completed Mailbox1 */
+#define CAN_TSR_TXOK1 ((uint32_t)0x00000200) /*!<Transmission OK of Mailbox1 */
+#define CAN_TSR_ALST1 ((uint32_t)0x00000400) /*!<Arbitration Lost for Mailbox1 */
+#define CAN_TSR_TERR1 ((uint32_t)0x00000800) /*!<Transmission Error of Mailbox1 */
+#define CAN_TSR_ABRQ1 ((uint32_t)0x00008000) /*!<Abort Request for Mailbox 1 */
+#define CAN_TSR_RQCP2 ((uint32_t)0x00010000) /*!<Request Completed Mailbox2 */
+#define CAN_TSR_TXOK2 ((uint32_t)0x00020000) /*!<Transmission OK of Mailbox 2 */
+#define CAN_TSR_ALST2 ((uint32_t)0x00040000) /*!<Arbitration Lost for mailbox 2 */
+#define CAN_TSR_TERR2 ((uint32_t)0x00080000) /*!<Transmission Error of Mailbox 2 */
+#define CAN_TSR_ABRQ2 ((uint32_t)0x00800000) /*!<Abort Request for Mailbox 2 */
+#define CAN_TSR_CODE ((uint32_t)0x03000000) /*!<Mailbox Code */
+
+#define CAN_TSR_TME ((uint32_t)0x1C000000) /*!<TME[2:0] bits */
+#define CAN_TSR_TME0 ((uint32_t)0x04000000) /*!<Transmit Mailbox 0 Empty */
+#define CAN_TSR_TME1 ((uint32_t)0x08000000) /*!<Transmit Mailbox 1 Empty */
+#define CAN_TSR_TME2 ((uint32_t)0x10000000) /*!<Transmit Mailbox 2 Empty */
+
+#define CAN_TSR_LOW ((uint32_t)0xE0000000) /*!<LOW[2:0] bits */
+#define CAN_TSR_LOW0 ((uint32_t)0x20000000) /*!<Lowest Priority Flag for Mailbox 0 */
+#define CAN_TSR_LOW1 ((uint32_t)0x40000000) /*!<Lowest Priority Flag for Mailbox 1 */
+#define CAN_TSR_LOW2 ((uint32_t)0x80000000) /*!<Lowest Priority Flag for Mailbox 2 */
+
+/******************* Bit definition for CAN_RF0R register *******************/
+#define CAN_RF0R_FMP0 ((uint32_t)0x00000003) /*!<FIFO 0 Message Pending */
+#define CAN_RF0R_FULL0 ((uint32_t)0x00000008) /*!<FIFO 0 Full */
+#define CAN_RF0R_FOVR0 ((uint32_t)0x00000010) /*!<FIFO 0 Overrun */
+#define CAN_RF0R_RFOM0 ((uint32_t)0x00000020) /*!<Release FIFO 0 Output Mailbox */
+
+/******************* Bit definition for CAN_RF1R register *******************/
+#define CAN_RF1R_FMP1 ((uint32_t)0x00000003) /*!<FIFO 1 Message Pending */
+#define CAN_RF1R_FULL1 ((uint32_t)0x00000008) /*!<FIFO 1 Full */
+#define CAN_RF1R_FOVR1 ((uint32_t)0x00000010) /*!<FIFO 1 Overrun */
+#define CAN_RF1R_RFOM1 ((uint32_t)0x00000020) /*!<Release FIFO 1 Output Mailbox */
+
+/******************** Bit definition for CAN_IER register *******************/
+#define CAN_IER_TMEIE ((uint32_t)0x00000001) /*!<Transmit Mailbox Empty Interrupt Enable */
+#define CAN_IER_FMPIE0 ((uint32_t)0x00000002) /*!<FIFO Message Pending Interrupt Enable */
+#define CAN_IER_FFIE0 ((uint32_t)0x00000004) /*!<FIFO Full Interrupt Enable */
+#define CAN_IER_FOVIE0 ((uint32_t)0x00000008) /*!<FIFO Overrun Interrupt Enable */
+#define CAN_IER_FMPIE1 ((uint32_t)0x00000010) /*!<FIFO Message Pending Interrupt Enable */
+#define CAN_IER_FFIE1 ((uint32_t)0x00000020) /*!<FIFO Full Interrupt Enable */
+#define CAN_IER_FOVIE1 ((uint32_t)0x00000040) /*!<FIFO Overrun Interrupt Enable */
+#define CAN_IER_EWGIE ((uint32_t)0x00000100) /*!<Error Warning Interrupt Enable */
+#define CAN_IER_EPVIE ((uint32_t)0x00000200) /*!<Error Passive Interrupt Enable */
+#define CAN_IER_BOFIE ((uint32_t)0x00000400) /*!<Bus-Off Interrupt Enable */
+#define CAN_IER_LECIE ((uint32_t)0x00000800) /*!<Last Error Code Interrupt Enable */
+#define CAN_IER_ERRIE ((uint32_t)0x00008000) /*!<Error Interrupt Enable */
+#define CAN_IER_WKUIE ((uint32_t)0x00010000) /*!<Wakeup Interrupt Enable */
+#define CAN_IER_SLKIE ((uint32_t)0x00020000) /*!<Sleep Interrupt Enable */
+
+/******************** Bit definition for CAN_ESR register *******************/
+#define CAN_ESR_EWGF ((uint32_t)0x00000001) /*!<Error Warning Flag */
+#define CAN_ESR_EPVF ((uint32_t)0x00000002) /*!<Error Passive Flag */
+#define CAN_ESR_BOFF ((uint32_t)0x00000004) /*!<Bus-Off Flag */
+
+#define CAN_ESR_LEC ((uint32_t)0x00000070) /*!<LEC[2:0] bits (Last Error Code) */
+#define CAN_ESR_LEC_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define CAN_ESR_LEC_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define CAN_ESR_LEC_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define CAN_ESR_TEC ((uint32_t)0x00FF0000) /*!<Least significant byte of the 9-bit Transmit Error Counter */
+#define CAN_ESR_REC ((uint32_t)0xFF000000) /*!<Receive Error Counter */
+
+/******************* Bit definition for CAN_BTR register ********************/
+#define CAN_BTR_BRP ((uint32_t)0x000003FF) /*!<Baud Rate Prescaler */
+#define CAN_BTR_TS1 ((uint32_t)0x000F0000) /*!<Time Segment 1 */
+#define CAN_BTR_TS1_0 ((uint32_t)0x00010000) /*!<Time Segment 1 (Bit 0) */
+#define CAN_BTR_TS1_1 ((uint32_t)0x00020000) /*!<Time Segment 1 (Bit 1) */
+#define CAN_BTR_TS1_2 ((uint32_t)0x00040000) /*!<Time Segment 1 (Bit 2) */
+#define CAN_BTR_TS1_3 ((uint32_t)0x00080000) /*!<Time Segment 1 (Bit 3) */
+#define CAN_BTR_TS2 ((uint32_t)0x00700000) /*!<Time Segment 2 */
+#define CAN_BTR_TS2_0 ((uint32_t)0x00100000) /*!<Time Segment 2 (Bit 0) */
+#define CAN_BTR_TS2_1 ((uint32_t)0x00200000) /*!<Time Segment 2 (Bit 1) */
+#define CAN_BTR_TS2_2 ((uint32_t)0x00400000) /*!<Time Segment 2 (Bit 2) */
+#define CAN_BTR_SJW ((uint32_t)0x03000000) /*!<Resynchronization Jump Width */
+#define CAN_BTR_SJW_0 ((uint32_t)0x01000000) /*!<Resynchronization Jump Width (Bit 0) */
+#define CAN_BTR_SJW_1 ((uint32_t)0x02000000) /*!<Resynchronization Jump Width (Bit 1) */
+#define CAN_BTR_LBKM ((uint32_t)0x40000000) /*!<Loop Back Mode (Debug) */
+#define CAN_BTR_SILM ((uint32_t)0x80000000) /*!<Silent Mode */
+
+/*!<Mailbox registers */
+/****************** Bit definition for CAN_TI0R register ********************/
+#define CAN_TI0R_TXRQ ((uint32_t)0x00000001) /*!<Transmit Mailbox Request */
+#define CAN_TI0R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_TI0R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_TI0R_EXID ((uint32_t)0x001FFFF8) /*!<Extended Identifier */
+#define CAN_TI0R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/****************** Bit definition for CAN_TDT0R register *******************/
+#define CAN_TDT0R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_TDT0R_TGT ((uint32_t)0x00000100) /*!<Transmit Global Time */
+#define CAN_TDT0R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/****************** Bit definition for CAN_TDL0R register *******************/
+#define CAN_TDL0R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_TDL0R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_TDL0R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_TDL0R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/****************** Bit definition for CAN_TDH0R register *******************/
+#define CAN_TDH0R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_TDH0R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_TDH0R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_TDH0R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/******************* Bit definition for CAN_TI1R register *******************/
+#define CAN_TI1R_TXRQ ((uint32_t)0x00000001) /*!<Transmit Mailbox Request */
+#define CAN_TI1R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_TI1R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_TI1R_EXID ((uint32_t)0x001FFFF8) /*!<Extended Identifier */
+#define CAN_TI1R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/******************* Bit definition for CAN_TDT1R register ******************/
+#define CAN_TDT1R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_TDT1R_TGT ((uint32_t)0x00000100) /*!<Transmit Global Time */
+#define CAN_TDT1R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/******************* Bit definition for CAN_TDL1R register ******************/
+#define CAN_TDL1R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_TDL1R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_TDL1R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_TDL1R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/******************* Bit definition for CAN_TDH1R register ******************/
+#define CAN_TDH1R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_TDH1R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_TDH1R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_TDH1R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/******************* Bit definition for CAN_TI2R register *******************/
+#define CAN_TI2R_TXRQ ((uint32_t)0x00000001) /*!<Transmit Mailbox Request */
+#define CAN_TI2R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_TI2R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_TI2R_EXID ((uint32_t)0x001FFFF8) /*!<Extended identifier */
+#define CAN_TI2R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/******************* Bit definition for CAN_TDT2R register ******************/
+#define CAN_TDT2R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_TDT2R_TGT ((uint32_t)0x00000100) /*!<Transmit Global Time */
+#define CAN_TDT2R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/******************* Bit definition for CAN_TDL2R register ******************/
+#define CAN_TDL2R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_TDL2R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_TDL2R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_TDL2R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/******************* Bit definition for CAN_TDH2R register ******************/
+#define CAN_TDH2R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_TDH2R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_TDH2R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_TDH2R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/******************* Bit definition for CAN_RI0R register *******************/
+#define CAN_RI0R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_RI0R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_RI0R_EXID ((uint32_t)0x001FFFF8) /*!<Extended Identifier */
+#define CAN_RI0R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/******************* Bit definition for CAN_RDT0R register ******************/
+#define CAN_RDT0R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_RDT0R_FMI ((uint32_t)0x0000FF00) /*!<Filter Match Index */
+#define CAN_RDT0R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/******************* Bit definition for CAN_RDL0R register ******************/
+#define CAN_RDL0R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_RDL0R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_RDL0R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_RDL0R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/******************* Bit definition for CAN_RDH0R register ******************/
+#define CAN_RDH0R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_RDH0R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_RDH0R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_RDH0R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/******************* Bit definition for CAN_RI1R register *******************/
+#define CAN_RI1R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_RI1R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_RI1R_EXID ((uint32_t)0x001FFFF8) /*!<Extended identifier */
+#define CAN_RI1R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/******************* Bit definition for CAN_RDT1R register ******************/
+#define CAN_RDT1R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_RDT1R_FMI ((uint32_t)0x0000FF00) /*!<Filter Match Index */
+#define CAN_RDT1R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/******************* Bit definition for CAN_RDL1R register ******************/
+#define CAN_RDL1R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_RDL1R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_RDL1R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_RDL1R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/******************* Bit definition for CAN_RDH1R register ******************/
+#define CAN_RDH1R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_RDH1R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_RDH1R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_RDH1R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/*!<CAN filter registers */
+/******************* Bit definition for CAN_FMR register ********************/
+#define CAN_FMR_FINIT ((uint32_t)0x00000001) /*!<Filter Init Mode */
+
+/******************* Bit definition for CAN_FM1R register *******************/
+#define CAN_FM1R_FBM ((uint32_t)0x00003FFF) /*!<Filter Mode */
+#define CAN_FM1R_FBM0 ((uint32_t)0x00000001) /*!<Filter Init Mode bit 0 */
+#define CAN_FM1R_FBM1 ((uint32_t)0x00000002) /*!<Filter Init Mode bit 1 */
+#define CAN_FM1R_FBM2 ((uint32_t)0x00000004) /*!<Filter Init Mode bit 2 */
+#define CAN_FM1R_FBM3 ((uint32_t)0x00000008) /*!<Filter Init Mode bit 3 */
+#define CAN_FM1R_FBM4 ((uint32_t)0x00000010) /*!<Filter Init Mode bit 4 */
+#define CAN_FM1R_FBM5 ((uint32_t)0x00000020) /*!<Filter Init Mode bit 5 */
+#define CAN_FM1R_FBM6 ((uint32_t)0x00000040) /*!<Filter Init Mode bit 6 */
+#define CAN_FM1R_FBM7 ((uint32_t)0x00000080) /*!<Filter Init Mode bit 7 */
+#define CAN_FM1R_FBM8 ((uint32_t)0x00000100) /*!<Filter Init Mode bit 8 */
+#define CAN_FM1R_FBM9 ((uint32_t)0x00000200) /*!<Filter Init Mode bit 9 */
+#define CAN_FM1R_FBM10 ((uint32_t)0x00000400) /*!<Filter Init Mode bit 10 */
+#define CAN_FM1R_FBM11 ((uint32_t)0x00000800) /*!<Filter Init Mode bit 11 */
+#define CAN_FM1R_FBM12 ((uint32_t)0x00001000) /*!<Filter Init Mode bit 12 */
+#define CAN_FM1R_FBM13 ((uint32_t)0x00002000) /*!<Filter Init Mode bit 13 */
+
+/******************* Bit definition for CAN_FS1R register *******************/
+#define CAN_FS1R_FSC ((uint32_t)0x00003FFF) /*!<Filter Scale Configuration */
+#define CAN_FS1R_FSC0 ((uint32_t)0x00000001) /*!<Filter Scale Configuration bit 0 */
+#define CAN_FS1R_FSC1 ((uint32_t)0x00000002) /*!<Filter Scale Configuration bit 1 */
+#define CAN_FS1R_FSC2 ((uint32_t)0x00000004) /*!<Filter Scale Configuration bit 2 */
+#define CAN_FS1R_FSC3 ((uint32_t)0x00000008) /*!<Filter Scale Configuration bit 3 */
+#define CAN_FS1R_FSC4 ((uint32_t)0x00000010) /*!<Filter Scale Configuration bit 4 */
+#define CAN_FS1R_FSC5 ((uint32_t)0x00000020) /*!<Filter Scale Configuration bit 5 */
+#define CAN_FS1R_FSC6 ((uint32_t)0x00000040) /*!<Filter Scale Configuration bit 6 */
+#define CAN_FS1R_FSC7 ((uint32_t)0x00000080) /*!<Filter Scale Configuration bit 7 */
+#define CAN_FS1R_FSC8 ((uint32_t)0x00000100) /*!<Filter Scale Configuration bit 8 */
+#define CAN_FS1R_FSC9 ((uint32_t)0x00000200) /*!<Filter Scale Configuration bit 9 */
+#define CAN_FS1R_FSC10 ((uint32_t)0x00000400) /*!<Filter Scale Configuration bit 10 */
+#define CAN_FS1R_FSC11 ((uint32_t)0x00000800) /*!<Filter Scale Configuration bit 11 */
+#define CAN_FS1R_FSC12 ((uint32_t)0x00001000) /*!<Filter Scale Configuration bit 12 */
+#define CAN_FS1R_FSC13 ((uint32_t)0x00002000) /*!<Filter Scale Configuration bit 13 */
+
+/****************** Bit definition for CAN_FFA1R register *******************/
+#define CAN_FFA1R_FFA ((uint32_t)0x00003FFF) /*!<Filter FIFO Assignment */
+#define CAN_FFA1R_FFA0 ((uint32_t)0x00000001) /*!<Filter FIFO Assignment for Filter 0 */
+#define CAN_FFA1R_FFA1 ((uint32_t)0x00000002) /*!<Filter FIFO Assignment for Filter 1 */
+#define CAN_FFA1R_FFA2 ((uint32_t)0x00000004) /*!<Filter FIFO Assignment for Filter 2 */
+#define CAN_FFA1R_FFA3 ((uint32_t)0x00000008) /*!<Filter FIFO Assignment for Filter 3 */
+#define CAN_FFA1R_FFA4 ((uint32_t)0x00000010) /*!<Filter FIFO Assignment for Filter 4 */
+#define CAN_FFA1R_FFA5 ((uint32_t)0x00000020) /*!<Filter FIFO Assignment for Filter 5 */
+#define CAN_FFA1R_FFA6 ((uint32_t)0x00000040) /*!<Filter FIFO Assignment for Filter 6 */
+#define CAN_FFA1R_FFA7 ((uint32_t)0x00000080) /*!<Filter FIFO Assignment for Filter 7 */
+#define CAN_FFA1R_FFA8 ((uint32_t)0x00000100) /*!<Filter FIFO Assignment for Filter 8 */
+#define CAN_FFA1R_FFA9 ((uint32_t)0x00000200) /*!<Filter FIFO Assignment for Filter 9 */
+#define CAN_FFA1R_FFA10 ((uint32_t)0x00000400) /*!<Filter FIFO Assignment for Filter 10 */
+#define CAN_FFA1R_FFA11 ((uint32_t)0x00000800) /*!<Filter FIFO Assignment for Filter 11 */
+#define CAN_FFA1R_FFA12 ((uint32_t)0x00001000) /*!<Filter FIFO Assignment for Filter 12 */
+#define CAN_FFA1R_FFA13 ((uint32_t)0x00002000) /*!<Filter FIFO Assignment for Filter 13 */
+
+/******************* Bit definition for CAN_FA1R register *******************/
+#define CAN_FA1R_FACT ((uint32_t)0x00003FFF) /*!<Filter Active */
+#define CAN_FA1R_FACT0 ((uint32_t)0x00000001) /*!<Filter 0 Active */
+#define CAN_FA1R_FACT1 ((uint32_t)0x00000002) /*!<Filter 1 Active */
+#define CAN_FA1R_FACT2 ((uint32_t)0x00000004) /*!<Filter 2 Active */
+#define CAN_FA1R_FACT3 ((uint32_t)0x00000008) /*!<Filter 3 Active */
+#define CAN_FA1R_FACT4 ((uint32_t)0x00000010) /*!<Filter 4 Active */
+#define CAN_FA1R_FACT5 ((uint32_t)0x00000020) /*!<Filter 5 Active */
+#define CAN_FA1R_FACT6 ((uint32_t)0x00000040) /*!<Filter 6 Active */
+#define CAN_FA1R_FACT7 ((uint32_t)0x00000080) /*!<Filter 7 Active */
+#define CAN_FA1R_FACT8 ((uint32_t)0x00000100) /*!<Filter 8 Active */
+#define CAN_FA1R_FACT9 ((uint32_t)0x00000200) /*!<Filter 9 Active */
+#define CAN_FA1R_FACT10 ((uint32_t)0x00000400) /*!<Filter 10 Active */
+#define CAN_FA1R_FACT11 ((uint32_t)0x00000800) /*!<Filter 11 Active */
+#define CAN_FA1R_FACT12 ((uint32_t)0x00001000) /*!<Filter 12 Active */
+#define CAN_FA1R_FACT13 ((uint32_t)0x00002000) /*!<Filter 13 Active */
+
+/******************* Bit definition for CAN_F0R1 register *******************/
+#define CAN_F0R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F0R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F0R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F0R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F0R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F0R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F0R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F0R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F0R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F0R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F0R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F0R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F0R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F0R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F0R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F0R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F0R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F0R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F0R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F0R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F0R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F0R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F0R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F0R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F0R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F0R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F0R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F0R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F0R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F0R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F0R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F0R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F1R1 register *******************/
+#define CAN_F1R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F1R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F1R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F1R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F1R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F1R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F1R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F1R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F1R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F1R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F1R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F1R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F1R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F1R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F1R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F1R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F1R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F1R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F1R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F1R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F1R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F1R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F1R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F1R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F1R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F1R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F1R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F1R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F1R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F1R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F1R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F1R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F2R1 register *******************/
+#define CAN_F2R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F2R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F2R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F2R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F2R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F2R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F2R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F2R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F2R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F2R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F2R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F2R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F2R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F2R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F2R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F2R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F2R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F2R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F2R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F2R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F2R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F2R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F2R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F2R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F2R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F2R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F2R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F2R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F2R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F2R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F2R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F2R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F3R1 register *******************/
+#define CAN_F3R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F3R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F3R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F3R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F3R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F3R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F3R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F3R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F3R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F3R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F3R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F3R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F3R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F3R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F3R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F3R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F3R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F3R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F3R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F3R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F3R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F3R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F3R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F3R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F3R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F3R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F3R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F3R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F3R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F3R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F3R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F3R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F4R1 register *******************/
+#define CAN_F4R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F4R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F4R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F4R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F4R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F4R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F4R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F4R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F4R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F4R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F4R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F4R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F4R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F4R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F4R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F4R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F4R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F4R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F4R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F4R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F4R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F4R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F4R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F4R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F4R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F4R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F4R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F4R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F4R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F4R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F4R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F4R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F5R1 register *******************/
+#define CAN_F5R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F5R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F5R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F5R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F5R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F5R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F5R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F5R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F5R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F5R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F5R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F5R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F5R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F5R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F5R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F5R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F5R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F5R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F5R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F5R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F5R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F5R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F5R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F5R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F5R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F5R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F5R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F5R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F5R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F5R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F5R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F5R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F6R1 register *******************/
+#define CAN_F6R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F6R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F6R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F6R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F6R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F6R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F6R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F6R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F6R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F6R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F6R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F6R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F6R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F6R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F6R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F6R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F6R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F6R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F6R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F6R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F6R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F6R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F6R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F6R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F6R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F6R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F6R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F6R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F6R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F6R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F6R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F6R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F7R1 register *******************/
+#define CAN_F7R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F7R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F7R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F7R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F7R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F7R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F7R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F7R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F7R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F7R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F7R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F7R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F7R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F7R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F7R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F7R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F7R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F7R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F7R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F7R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F7R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F7R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F7R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F7R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F7R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F7R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F7R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F7R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F7R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F7R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F7R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F7R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F8R1 register *******************/
+#define CAN_F8R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F8R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F8R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F8R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F8R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F8R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F8R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F8R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F8R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F8R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F8R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F8R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F8R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F8R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F8R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F8R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F8R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F8R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F8R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F8R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F8R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F8R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F8R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F8R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F8R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F8R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F8R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F8R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F8R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F8R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F8R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F8R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F9R1 register *******************/
+#define CAN_F9R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F9R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F9R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F9R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F9R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F9R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F9R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F9R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F9R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F9R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F9R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F9R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F9R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F9R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F9R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F9R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F9R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F9R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F9R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F9R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F9R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F9R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F9R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F9R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F9R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F9R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F9R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F9R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F9R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F9R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F9R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F9R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F10R1 register ******************/
+#define CAN_F10R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F10R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F10R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F10R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F10R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F10R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F10R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F10R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F10R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F10R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F10R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F10R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F10R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F10R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F10R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F10R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F10R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F10R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F10R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F10R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F10R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F10R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F10R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F10R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F10R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F10R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F10R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F10R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F10R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F10R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F10R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F10R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F11R1 register ******************/
+#define CAN_F11R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F11R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F11R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F11R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F11R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F11R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F11R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F11R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F11R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F11R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F11R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F11R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F11R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F11R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F11R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F11R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F11R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F11R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F11R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F11R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F11R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F11R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F11R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F11R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F11R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F11R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F11R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F11R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F11R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F11R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F11R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F11R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F12R1 register ******************/
+#define CAN_F12R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F12R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F12R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F12R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F12R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F12R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F12R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F12R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F12R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F12R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F12R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F12R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F12R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F12R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F12R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F12R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F12R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F12R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F12R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F12R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F12R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F12R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F12R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F12R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F12R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F12R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F12R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F12R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F12R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F12R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F12R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F12R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F13R1 register ******************/
+#define CAN_F13R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F13R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F13R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F13R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F13R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F13R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F13R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F13R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F13R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F13R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F13R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F13R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F13R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F13R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F13R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F13R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F13R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F13R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F13R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F13R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F13R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F13R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F13R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F13R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F13R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F13R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F13R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F13R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F13R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F13R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F13R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F13R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F0R2 register *******************/
+#define CAN_F0R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F0R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F0R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F0R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F0R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F0R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F0R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F0R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F0R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F0R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F0R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F0R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F0R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F0R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F0R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F0R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F0R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F0R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F0R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F0R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F0R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F0R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F0R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F0R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F0R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F0R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F0R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F0R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F0R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F0R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F0R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F0R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F1R2 register *******************/
+#define CAN_F1R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F1R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F1R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F1R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F1R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F1R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F1R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F1R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F1R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F1R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F1R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F1R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F1R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F1R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F1R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F1R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F1R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F1R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F1R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F1R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F1R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F1R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F1R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F1R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F1R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F1R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F1R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F1R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F1R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F1R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F1R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F1R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F2R2 register *******************/
+#define CAN_F2R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F2R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F2R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F2R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F2R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F2R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F2R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F2R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F2R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F2R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F2R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F2R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F2R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F2R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F2R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F2R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F2R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F2R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F2R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F2R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F2R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F2R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F2R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F2R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F2R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F2R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F2R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F2R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F2R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F2R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F2R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F2R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F3R2 register *******************/
+#define CAN_F3R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F3R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F3R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F3R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F3R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F3R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F3R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F3R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F3R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F3R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F3R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F3R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F3R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F3R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F3R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F3R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F3R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F3R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F3R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F3R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F3R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F3R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F3R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F3R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F3R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F3R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F3R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F3R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F3R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F3R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F3R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F3R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F4R2 register *******************/
+#define CAN_F4R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F4R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F4R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F4R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F4R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F4R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F4R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F4R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F4R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F4R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F4R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F4R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F4R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F4R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F4R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F4R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F4R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F4R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F4R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F4R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F4R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F4R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F4R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F4R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F4R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F4R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F4R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F4R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F4R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F4R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F4R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F4R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F5R2 register *******************/
+#define CAN_F5R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F5R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F5R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F5R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F5R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F5R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F5R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F5R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F5R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F5R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F5R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F5R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F5R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F5R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F5R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F5R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F5R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F5R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F5R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F5R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F5R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F5R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F5R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F5R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F5R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F5R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F5R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F5R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F5R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F5R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F5R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F5R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F6R2 register *******************/
+#define CAN_F6R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F6R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F6R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F6R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F6R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F6R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F6R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F6R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F6R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F6R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F6R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F6R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F6R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F6R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F6R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F6R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F6R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F6R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F6R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F6R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F6R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F6R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F6R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F6R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F6R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F6R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F6R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F6R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F6R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F6R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F6R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F6R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F7R2 register *******************/
+#define CAN_F7R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F7R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F7R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F7R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F7R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F7R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F7R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F7R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F7R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F7R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F7R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F7R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F7R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F7R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F7R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F7R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F7R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F7R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F7R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F7R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F7R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F7R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F7R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F7R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F7R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F7R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F7R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F7R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F7R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F7R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F7R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F7R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F8R2 register *******************/
+#define CAN_F8R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F8R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F8R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F8R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F8R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F8R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F8R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F8R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F8R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F8R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F8R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F8R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F8R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F8R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F8R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F8R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F8R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F8R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F8R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F8R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F8R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F8R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F8R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F8R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F8R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F8R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F8R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F8R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F8R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F8R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F8R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F8R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F9R2 register *******************/
+#define CAN_F9R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F9R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F9R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F9R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F9R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F9R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F9R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F9R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F9R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F9R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F9R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F9R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F9R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F9R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F9R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F9R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F9R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F9R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F9R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F9R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F9R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F9R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F9R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F9R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F9R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F9R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F9R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F9R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F9R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F9R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F9R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F9R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F10R2 register ******************/
+#define CAN_F10R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F10R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F10R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F10R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F10R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F10R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F10R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F10R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F10R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F10R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F10R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F10R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F10R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F10R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F10R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F10R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F10R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F10R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F10R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F10R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F10R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F10R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F10R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F10R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F10R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F10R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F10R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F10R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F10R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F10R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F10R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F10R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F11R2 register ******************/
+#define CAN_F11R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F11R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F11R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F11R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F11R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F11R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F11R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F11R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F11R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F11R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F11R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F11R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F11R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F11R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F11R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F11R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F11R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F11R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F11R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F11R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F11R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F11R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F11R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F11R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F11R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F11R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F11R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F11R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F11R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F11R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F11R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F11R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F12R2 register ******************/
+#define CAN_F12R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F12R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F12R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F12R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F12R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F12R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F12R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F12R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F12R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F12R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F12R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F12R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F12R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F12R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F12R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F12R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F12R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F12R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F12R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F12R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F12R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F12R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F12R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F12R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F12R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F12R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F12R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F12R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F12R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F12R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F12R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F12R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F13R2 register ******************/
+#define CAN_F13R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F13R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F13R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F13R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F13R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F13R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F13R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F13R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F13R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F13R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F13R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F13R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F13R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F13R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F13R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F13R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F13R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F13R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F13R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F13R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F13R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F13R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F13R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F13R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F13R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F13R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F13R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F13R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F13R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F13R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F13R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F13R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************************************************************************/
+/* */
+/* HDMI-CEC (CEC) */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for CEC_CR register *********************/
+#define CEC_CR_CECEN ((uint32_t)0x00000001) /*!< CEC Enable */
+#define CEC_CR_TXSOM ((uint32_t)0x00000002) /*!< CEC Tx Start Of Message */
+#define CEC_CR_TXEOM ((uint32_t)0x00000004) /*!< CEC Tx End Of Message */
+
+/******************* Bit definition for CEC_CFGR register *******************/
+#define CEC_CFGR_SFT ((uint32_t)0x00000007) /*!< CEC Signal Free Time */
+#define CEC_CFGR_RXTOL ((uint32_t)0x00000008) /*!< CEC Tolerance */
+#define CEC_CFGR_BRESTP ((uint32_t)0x00000010) /*!< CEC Rx Stop */
+#define CEC_CFGR_BREGEN ((uint32_t)0x00000020) /*!< CEC Bit Rising Error generation */
+#define CEC_CFGR_LBPEGEN ((uint32_t)0x00000040) /*!< CEC Long Bit Period Error gener. */
+#define CEC_CFGR_BRDNOGEN ((uint32_t)0x00000080) /*!< CEC Broadcast No Error generation */
+#define CEC_CFGR_SFTOPT ((uint32_t)0x00000100) /*!< CEC Signal Free Time optional */
+#define CEC_CFGR_OAR ((uint32_t)0x7FFF0000) /*!< CEC Own Address */
+#define CEC_CFGR_LSTN ((uint32_t)0x80000000) /*!< CEC Listen mode */
+
+/******************* Bit definition for CEC_TXDR register *******************/
+#define CEC_TXDR_TXD ((uint32_t)0x000000FF) /*!< CEC Tx Data */
+
+/******************* Bit definition for CEC_RXDR register *******************/
+#define CEC_TXDR_RXD ((uint32_t)0x000000FF) /*!< CEC Rx Data */
+
+/******************* Bit definition for CEC_ISR register ********************/
+#define CEC_ISR_RXBR ((uint32_t)0x00000001) /*!< CEC Rx-Byte Received */
+#define CEC_ISR_RXEND ((uint32_t)0x00000002) /*!< CEC End Of Reception */
+#define CEC_ISR_RXOVR ((uint32_t)0x00000004) /*!< CEC Rx-Overrun */
+#define CEC_ISR_BRE ((uint32_t)0x00000008) /*!< CEC Rx Bit Rising Error */
+#define CEC_ISR_SBPE ((uint32_t)0x00000010) /*!< CEC Rx Short Bit period Error */
+#define CEC_ISR_LBPE ((uint32_t)0x00000020) /*!< CEC Rx Long Bit period Error */
+#define CEC_ISR_RXACKE ((uint32_t)0x00000040) /*!< CEC Rx Missing Acknowledge */
+#define CEC_ISR_ARBLST ((uint32_t)0x00000080) /*!< CEC Arbitration Lost */
+#define CEC_ISR_TXBR ((uint32_t)0x00000100) /*!< CEC Tx Byte Request */
+#define CEC_ISR_TXEND ((uint32_t)0x00000200) /*!< CEC End of Transmission */
+#define CEC_ISR_TXUDR ((uint32_t)0x00000400) /*!< CEC Tx-Buffer Underrun */
+#define CEC_ISR_TXERR ((uint32_t)0x00000800) /*!< CEC Tx-Error */
+#define CEC_ISR_TXACKE ((uint32_t)0x00001000) /*!< CEC Tx Missing Acknowledge */
+
+/******************* Bit definition for CEC_IER register ********************/
+#define CEC_IER_RXBRIE ((uint32_t)0x00000001) /*!< CEC Rx-Byte Received IT Enable */
+#define CEC_IER_RXENDIE ((uint32_t)0x00000002) /*!< CEC End Of Reception IT Enable */
+#define CEC_IER_RXOVRIE ((uint32_t)0x00000004) /*!< CEC Rx-Overrun IT Enable */
+#define CEC_IER_BREIE ((uint32_t)0x00000008) /*!< CEC Rx Bit Rising Error IT Enable */
+#define CEC_IER_SBPEIE ((uint32_t)0x00000010) /*!< CEC Rx Short Bit period Error IT Enable*/
+#define CEC_IER_LBPEIE ((uint32_t)0x00000020) /*!< CEC Rx Long Bit period Error IT Enable */
+#define CEC_IER_RXACKEIE ((uint32_t)0x00000040) /*!< CEC Rx Missing Acknowledge IT Enable */
+#define CEC_IER_ARBLSTIE ((uint32_t)0x00000080) /*!< CEC Arbitration Lost IT Enable */
+#define CEC_IER_TXBRIE ((uint32_t)0x00000100) /*!< CEC Tx Byte Request IT Enable */
+#define CEC_IER_TXENDIE ((uint32_t)0x00000200) /*!< CEC End of Transmission IT Enable */
+#define CEC_IER_TXUDRIE ((uint32_t)0x00000400) /*!< CEC Tx-Buffer Underrun IT Enable */
+#define CEC_IER_TXERRIE ((uint32_t)0x00000800) /*!< CEC Tx-Error IT Enable */
+#define CEC_IER_TXACKEIE ((uint32_t)0x00001000) /*!< CEC Tx Missing Acknowledge IT Enable */
+
+
+/******************************************************************************/
+/* */
+/* Analog Comparators (COMP) */
+/* */
+/******************************************************************************/
+/*********************** Bit definition for COMP_CSR register ***************/
+/* COMP1 bits definition */
+#define COMP_CSR_COMP1EN ((uint32_t)0x00000001) /*!< COMP1 enable */
+#define COMP_CSR_COMP1SW1 ((uint32_t)0x00000002) /*!< SW1 switch control */
+#define COMP_CSR_COMP1MODE ((uint32_t)0x0000000C) /*!< COMP1 power mode */
+#define COMP_CSR_COMP1MODE_0 ((uint32_t)0x00000004) /*!< COMP1 power mode bit 0 */
+#define COMP_CSR_COMP1MODE_1 ((uint32_t)0x00000008) /*!< COMP1 power mode bit 1 */
+#define COMP_CSR_COMP1INSEL ((uint32_t)0x00000070) /*!< COMP1 inverting input select */
+#define COMP_CSR_COMP1INSEL_0 ((uint32_t)0x00000010) /*!< COMP1 inverting input select bit 0 */
+#define COMP_CSR_COMP1INSEL_1 ((uint32_t)0x00000020) /*!< COMP1 inverting input select bit 1 */
+#define COMP_CSR_COMP1INSEL_2 ((uint32_t)0x00000040) /*!< COMP1 inverting input select bit 2 */
+#define COMP_CSR_COMP1OUTSEL ((uint32_t)0x00000700) /*!< COMP1 output select */
+#define COMP_CSR_COMP1OUTSEL_0 ((uint32_t)0x00000100) /*!< COMP1 output select bit 0 */
+#define COMP_CSR_COMP1OUTSEL_1 ((uint32_t)0x00000200) /*!< COMP1 output select bit 1 */
+#define COMP_CSR_COMP1OUTSEL_2 ((uint32_t)0x00000400) /*!< COMP1 output select bit 2 */
+#define COMP_CSR_COMP1POL ((uint32_t)0x00000800) /*!< COMP1 output polarity */
+#define COMP_CSR_COMP1HYST ((uint32_t)0x00003000) /*!< COMP1 hysteresis */
+#define COMP_CSR_COMP1HYST_0 ((uint32_t)0x00001000) /*!< COMP1 hysteresis bit 0 */
+#define COMP_CSR_COMP1HYST_1 ((uint32_t)0x00002000) /*!< COMP1 hysteresis bit 1 */
+#define COMP_CSR_COMP1OUT ((uint32_t)0x00004000) /*!< COMP1 output level */
+#define COMP_CSR_COMP1LOCK ((uint32_t)0x00008000) /*!< COMP1 lock */
+/* COMP2 bits definition */
+#define COMP_CSR_COMP2EN ((uint32_t)0x00010000) /*!< COMP2 enable */
+#define COMP_CSR_COMP2MODE ((uint32_t)0x000C0000) /*!< COMP2 power mode */
+#define COMP_CSR_COMP2MODE_0 ((uint32_t)0x00040000) /*!< COMP2 power mode bit 0 */
+#define COMP_CSR_COMP2MODE_1 ((uint32_t)0x00080000) /*!< COMP2 power mode bit 1 */
+#define COMP_CSR_COMP2INSEL ((uint32_t)0x00700000) /*!< COMP2 inverting input select */
+#define COMP_CSR_COMP2INSEL_0 ((uint32_t)0x00100000) /*!< COMP2 inverting input select bit 0 */
+#define COMP_CSR_COMP2INSEL_1 ((uint32_t)0x00200000) /*!< COMP2 inverting input select bit 1 */
+#define COMP_CSR_COMP2INSEL_2 ((uint32_t)0x00400000) /*!< COMP2 inverting input select bit 2 */
+#define COMP_CSR_WNDWEN ((uint32_t)0x00800000) /*!< Comparators window mode enable */
+#define COMP_CSR_COMP2OUTSEL ((uint32_t)0x07000000) /*!< COMP2 output select */
+#define COMP_CSR_COMP2OUTSEL_0 ((uint32_t)0x01000000) /*!< COMP2 output select bit 0 */
+#define COMP_CSR_COMP2OUTSEL_1 ((uint32_t)0x02000000) /*!< COMP2 output select bit 1 */
+#define COMP_CSR_COMP2OUTSEL_2 ((uint32_t)0x04000000) /*!< COMP2 output select bit 2 */
+#define COMP_CSR_COMP2POL ((uint32_t)0x08000000) /*!< COMP2 output polarity */
+#define COMP_CSR_COMP2HYST ((uint32_t)0x30000000) /*!< COMP2 hysteresis */
+#define COMP_CSR_COMP2HYST_0 ((uint32_t)0x10000000) /*!< COMP2 hysteresis bit 0 */
+#define COMP_CSR_COMP2HYST_1 ((uint32_t)0x20000000) /*!< COMP2 hysteresis bit 1 */
+#define COMP_CSR_COMP2OUT ((uint32_t)0x40000000) /*!< COMP2 output level */
+#define COMP_CSR_COMP2LOCK ((uint32_t)0x80000000) /*!< COMP2 lock */
+/* COMPx bits definition */
+#define COMP_CSR_COMPxEN ((uint16_t)0x0001) /*!< COMPx enable */
+#define COMP_CSR_COMPxMODE ((uint16_t)0x000C) /*!< COMPx power mode */
+#define COMP_CSR_COMPxMODE_0 ((uint16_t)0x0004) /*!< COMPx power mode bit 0 */
+#define COMP_CSR_COMPxMODE_1 ((uint16_t)0x0008) /*!< COMPx power mode bit 1 */
+#define COMP_CSR_COMPxINSEL ((uint16_t)0x0070) /*!< COMPx inverting input select */
+#define COMP_CSR_COMPxINSEL_0 ((uint16_t)0x0010) /*!< COMPx inverting input select bit 0 */
+#define COMP_CSR_COMPxINSEL_1 ((uint16_t)0x0020) /*!< COMPx inverting input select bit 1 */
+#define COMP_CSR_COMPxINSEL_2 ((uint16_t)0x0040) /*!< COMPx inverting input select bit 2 */
+#define COMP_CSR_COMPxOUTSEL ((uint16_t)0x0700) /*!< COMPx output select */
+#define COMP_CSR_COMPxOUTSEL_0 ((uint16_t)0x0100) /*!< COMPx output select bit 0 */
+#define COMP_CSR_COMPxOUTSEL_1 ((uint16_t)0x0200) /*!< COMPx output select bit 1 */
+#define COMP_CSR_COMPxOUTSEL_2 ((uint16_t)0x0400) /*!< COMPx output select bit 2 */
+#define COMP_CSR_COMPxPOL ((uint16_t)0x0800) /*!< COMPx output polarity */
+#define COMP_CSR_COMPxHYST ((uint16_t)0x3000) /*!< COMPx hysteresis */
+#define COMP_CSR_COMPxHYST_0 ((uint16_t)0x1000) /*!< COMPx hysteresis bit 0 */
+#define COMP_CSR_COMPxHYST_1 ((uint16_t)0x2000) /*!< COMPx hysteresis bit 1 */
+#define COMP_CSR_COMPxOUT ((uint16_t)0x4000) /*!< COMPx output level */
+#define COMP_CSR_COMPxLOCK ((uint16_t)0x8000) /*!< COMPx lock */
+
+/******************************************************************************/
+/* */
+/* CRC calculation unit (CRC) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for CRC_DR register *********************/
+#define CRC_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data register bits */
+
+/******************* Bit definition for CRC_IDR register ********************/
+#define CRC_IDR_IDR ((uint8_t)0xFF) /*!< General-purpose 8-bit data register bits */
+
+/******************** Bit definition for CRC_CR register ********************/
+#define CRC_CR_RESET ((uint32_t)0x00000001) /*!< RESET the CRC computation unit bit */
+#define CRC_CR_POLYSIZE ((uint32_t)0x00000018) /*!< Polynomial size bits */
+#define CRC_CR_POLYSIZE_0 ((uint32_t)0x00000008) /*!< Polynomial size bit 0 */
+#define CRC_CR_POLYSIZE_1 ((uint32_t)0x00000010) /*!< Polynomial size bit 1 */
+#define CRC_CR_REV_IN ((uint32_t)0x00000060) /*!< REV_IN Reverse Input Data bits */
+#define CRC_CR_REV_IN_0 ((uint32_t)0x00000020) /*!< REV_IN Bit 0 */
+#define CRC_CR_REV_IN_1 ((uint32_t)0x00000040) /*!< REV_IN Bit 1 */
+#define CRC_CR_REV_OUT ((uint32_t)0x00000080) /*!< REV_OUT Reverse Output Data bits */
+
+/******************* Bit definition for CRC_INIT register *******************/
+#define CRC_INIT_INIT ((uint32_t)0xFFFFFFFF) /*!< Initial CRC value bits */
+
+/******************* Bit definition for CRC_POL register ********************/
+#define CRC_POL_POL ((uint32_t)0xFFFFFFFF) /*!< Coefficients of the polynomial */
+
+/******************************************************************************/
+/* */
+/* CRS Clock Recovery System */
+/******************************************************************************/
+
+/******************* Bit definition for CRS_CR register *********************/
+#define CRS_CR_SYNCOKIE ((uint32_t)0x00000001) /* SYNC event OK interrupt enable */
+#define CRS_CR_SYNCWARNIE ((uint32_t)0x00000002) /* SYNC warning interrupt enable */
+#define CRS_CR_ERRIE ((uint32_t)0x00000004) /* SYNC error interrupt enable */
+#define CRS_CR_ESYNCIE ((uint32_t)0x00000008) /* Expected SYNC(ESYNCF) interrupt Enable*/
+#define CRS_CR_CEN ((uint32_t)0x00000020) /* Frequency error counter enable */
+#define CRS_CR_AUTOTRIMEN ((uint32_t)0x00000040) /* Automatic trimming enable */
+#define CRS_CR_SWSYNC ((uint32_t)0x00000080) /* A Software SYNC event is generated */
+#define CRS_CR_TRIM ((uint32_t)0x00003F00) /* HSI48 oscillator smooth trimming */
+
+/******************* Bit definition for CRS_CFGR register *********************/
+#define CRS_CFGR_RELOAD ((uint32_t)0x0000FFFF) /* Counter reload value */
+#define CRS_CFGR_FELIM ((uint32_t)0x00FF0000) /* Frequency error limit */
+
+#define CRS_CFGR_SYNCDIV ((uint32_t)0x07000000) /* SYNC divider */
+#define CRS_CFGR_SYNCDIV_0 ((uint32_t)0x01000000) /* Bit 0 */
+#define CRS_CFGR_SYNCDIV_1 ((uint32_t)0x02000000) /* Bit 1 */
+#define CRS_CFGR_SYNCDIV_2 ((uint32_t)0x04000000) /* Bit 2 */
+
+#define CRS_CFGR_SYNCSRC ((uint32_t)0x30000000) /* SYNC signal source selection */
+#define CRS_CFGR_SYNCSRC_0 ((uint32_t)0x10000000) /* Bit 0 */
+#define CRS_CFGR_SYNCSRC_1 ((uint32_t)0x20000000) /* Bit 1 */
+
+#define CRS_CFGR_SYNCPOL ((uint32_t)0x80000000) /* SYNC polarity selection */
+
+/******************* Bit definition for CRS_ISR register *********************/
+#define CRS_ISR_SYNCOKF ((uint32_t)0x00000001) /* SYNC event OK flag */
+#define CRS_ISR_SYNCWARNF ((uint32_t)0x00000002) /* SYNC warning */
+#define CRS_ISR_ERRF ((uint32_t)0x00000004) /* SYNC error flag */
+#define CRS_ISR_ESYNCF ((uint32_t)0x00000008) /* Expected SYNC flag */
+#define CRS_ISR_SYNCERR ((uint32_t)0x00000100) /* SYNC error */
+#define CRS_ISR_SYNCMISS ((uint32_t)0x00000200) /* SYNC missed */
+#define CRS_ISR_TRIMOVF ((uint32_t)0x00000400) /* Trimming overflow or underflow */
+#define CRS_ISR_FEDIR ((uint32_t)0x00008000) /* Frequency error direction */
+#define CRS_ISR_FECAP ((uint32_t)0xFFFF0000) /* Frequency error capture */
+
+/******************* Bit definition for CRS_ICR register *********************/
+#define CRS_ICR_SYNCOKC ((uint32_t)0x00000001) /* SYNC event OK clear flag */
+#define CRS_ICR_SYNCWARNC ((uint32_t)0x00000002) /* SYNC warning clear flag */
+#define CRS_ICR_ERRC ((uint32_t)0x00000004) /* Error clear flag */
+#define CRS_ICR_ESYNCC ((uint32_t)0x00000008) /* Expected SYNC clear flag */
+
+/******************************************************************************/
+/* */
+/* Digital to Analog Converter (DAC) */
+/* */
+/******************************************************************************/
+/******************** Bit definition for DAC_CR register ********************/
+#define DAC_CR_EN1 ((uint32_t)0x00000001) /*!< DAC channel1 enable */
+#define DAC_CR_BOFF1 ((uint32_t)0x00000002) /*!< DAC channel1 output buffer disable */
+#define DAC_CR_TEN1 ((uint32_t)0x00000004) /*!< DAC channel1 Trigger enable */
+
+#define DAC_CR_TSEL1 ((uint32_t)0x00000038) /*!< TSEL1[2:0] (DAC channel1 Trigger selection) */
+#define DAC_CR_TSEL1_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define DAC_CR_TSEL1_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define DAC_CR_TSEL1_2 ((uint32_t)0x00000020) /*!< Bit 2 */
+
+#define DAC_CR_WAVE1 ((uint32_t)0x000000C0) /*!< WAVE1[1:0] (DAC channel1 noise/triangle wave generation enable) */
+#define DAC_CR_WAVE1_0 ((uint32_t)0x00000040) /*!< Bit 0 */
+#define DAC_CR_WAVE1_1 ((uint32_t)0x00000080) /*!< Bit 1 */
+
+#define DAC_CR_MAMP1 ((uint32_t)0x00000F00) /*!< MAMP1[3:0] (DAC channel1 Mask/Amplitude selector) */
+#define DAC_CR_MAMP1_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define DAC_CR_MAMP1_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define DAC_CR_MAMP1_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define DAC_CR_MAMP1_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+
+#define DAC_CR_DMAEN1 ((uint32_t)0x00001000) /*!< DAC channel1 DMA enable */
+#define DAC_CR_DMAUDRIE1 ((uint32_t)0x00002000) /*!< DAC channel1 DMA Underrun Interrupt enable */
+
+#define DAC_CR_EN2 ((uint32_t)0x00010000) /*!< DAC channel2 enable */
+#define DAC_CR_BOFF2 ((uint32_t)0x00020000) /*!< DAC channel2 output buffer disable */
+#define DAC_CR_TEN2 ((uint32_t)0x00040000) /*!< DAC channel2 Trigger enable */
+
+#define DAC_CR_TSEL2 ((uint32_t)0x00380000) /*!< TSEL2[2:0] (DAC channel2 Trigger selection) */
+#define DAC_CR_TSEL2_0 ((uint32_t)0x00080000) /*!< Bit 0 */
+#define DAC_CR_TSEL2_1 ((uint32_t)0x00100000) /*!< Bit 1 */
+#define DAC_CR_TSEL2_2 ((uint32_t)0x00200000) /*!< Bit 2 */
+
+#define DAC_CR_WAVE2 ((uint32_t)0x00C00000) /*!< WAVE2[1:0] (DAC channel2 noise/triangle wave generation enable) */
+#define DAC_CR_WAVE2_0 ((uint32_t)0x00400000) /*!< Bit 0 */
+#define DAC_CR_WAVE2_1 ((uint32_t)0x00800000) /*!< Bit 1 */
+
+#define DAC_CR_MAMP2 ((uint32_t)0x0F000000) /*!< MAMP2[3:0] (DAC channel2 Mask/Amplitude selector) */
+#define DAC_CR_MAMP2_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define DAC_CR_MAMP2_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define DAC_CR_MAMP2_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+#define DAC_CR_MAMP2_3 ((uint32_t)0x08000000) /*!< Bit 3 */
+
+#define DAC_CR_DMAEN2 ((uint32_t)0x10000000) /*!< DAC channel2 DMA enabled */
+#define DAC_CR_DMAUDRIE2 ((uint32_t)0x20000000) /*!< DAC channel2 DMA Underrun Interrupt enable */
+
+/***************** Bit definition for DAC_SWTRIGR register ******************/
+#define DAC_SWTRIGR_SWTRIG1 ((uint32_t)0x00000001) /*!< DAC channel1 software trigger */
+#define DAC_SWTRIGR_SWTRIG2 ((uint32_t)0x00000002) /*!< DAC channel2 software trigger */
+
+/***************** Bit definition for DAC_DHR12R1 register ******************/
+#define DAC_DHR12R1_DACC1DHR ((uint32_t)0x00000FFF) /*!< DAC channel1 12-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12L1 register ******************/
+#define DAC_DHR12L1_DACC1DHR ((uint32_t)0x0000FFF0) /*!< DAC channel1 12-bit Left aligned data */
+
+/****************** Bit definition for DAC_DHR8R1 register ******************/
+#define DAC_DHR8R1_DACC1DHR ((uint32_t)0x000000FF) /*!< DAC channel1 8-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12R2 register ******************/
+#define DAC_DHR12R2_DACC2DHR ((uint32_t)0x00000FFF) /*!< DAC channel2 12-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12L2 register ******************/
+#define DAC_DHR12L2_DACC2DHR ((uint32_t)0x0000FFF0) /*!< DAC channel2 12-bit Left aligned data */
+
+/****************** Bit definition for DAC_DHR8R2 register ******************/
+#define DAC_DHR8R2_DACC2DHR ((uint32_t)0x000000FF) /*!< DAC channel2 8-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12RD register ******************/
+#define DAC_DHR12RD_DACC1DHR ((uint32_t)0x00000FFF) /*!< DAC channel1 12-bit Right aligned data */
+#define DAC_DHR12RD_DACC2DHR ((uint32_t)0x0FFF0000) /*!< DAC channel2 12-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12LD register ******************/
+#define DAC_DHR12LD_DACC1DHR ((uint32_t)0x0000FFF0) /*!< DAC channel1 12-bit Left aligned data */
+#define DAC_DHR12LD_DACC2DHR ((uint32_t)0xFFF00000) /*!< DAC channel2 12-bit Left aligned data */
+
+/****************** Bit definition for DAC_DHR8RD register ******************/
+#define DAC_DHR8RD_DACC1DHR ((uint32_t)0x000000FF) /*!< DAC channel1 8-bit Right aligned data */
+#define DAC_DHR8RD_DACC2DHR ((uint32_t)0x0000FF00) /*!< DAC channel2 8-bit Right aligned data */
+
+/******************* Bit definition for DAC_DOR1 register *******************/
+#define DAC_DOR1_DACC1DOR ((uint32_t)0x00000FFF) /*!< DAC channel1 data output */
+
+/******************* Bit definition for DAC_DOR2 register *******************/
+#define DAC_DOR2_DACC2DOR ((uint32_t)0x00000FFF) /*!< DAC channel2 data output */
+
+/******************** Bit definition for DAC_SR register ********************/
+#define DAC_SR_DMAUDR1 ((uint32_t)0x00002000) /*!< DAC channel1 DMA underrun flag */
+#define DAC_SR_DMAUDR2 ((uint32_t)0x20000000) /*!< DAC channel2 DMA underrun flag */
+
+/******************************************************************************/
+/* */
+/* Debug MCU (DBGMCU) */
+/* */
+/******************************************************************************/
+
+/**************** Bit definition for DBGMCU_IDCODE register *****************/
+#define DBGMCU_IDCODE_DEV_ID ((uint32_t)0x00000FFF) /*!< Device Identifier */
+
+#define DBGMCU_IDCODE_REV_ID ((uint32_t)0xFFFF0000) /*!< REV_ID[15:0] bits (Revision Identifier) */
+#define DBGMCU_IDCODE_REV_ID_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define DBGMCU_IDCODE_REV_ID_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define DBGMCU_IDCODE_REV_ID_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define DBGMCU_IDCODE_REV_ID_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+#define DBGMCU_IDCODE_REV_ID_4 ((uint32_t)0x00100000) /*!< Bit 4 */
+#define DBGMCU_IDCODE_REV_ID_5 ((uint32_t)0x00200000) /*!< Bit 5 */
+#define DBGMCU_IDCODE_REV_ID_6 ((uint32_t)0x00400000) /*!< Bit 6 */
+#define DBGMCU_IDCODE_REV_ID_7 ((uint32_t)0x00800000) /*!< Bit 7 */
+#define DBGMCU_IDCODE_REV_ID_8 ((uint32_t)0x01000000) /*!< Bit 8 */
+#define DBGMCU_IDCODE_REV_ID_9 ((uint32_t)0x02000000) /*!< Bit 9 */
+#define DBGMCU_IDCODE_REV_ID_10 ((uint32_t)0x04000000) /*!< Bit 10 */
+#define DBGMCU_IDCODE_REV_ID_11 ((uint32_t)0x08000000) /*!< Bit 11 */
+#define DBGMCU_IDCODE_REV_ID_12 ((uint32_t)0x10000000) /*!< Bit 12 */
+#define DBGMCU_IDCODE_REV_ID_13 ((uint32_t)0x20000000) /*!< Bit 13 */
+#define DBGMCU_IDCODE_REV_ID_14 ((uint32_t)0x40000000) /*!< Bit 14 */
+#define DBGMCU_IDCODE_REV_ID_15 ((uint32_t)0x80000000) /*!< Bit 15 */
+
+/****************** Bit definition for DBGMCU_CR register *******************/
+#define DBGMCU_CR_DBG_STOP ((uint32_t)0x00000002) /*!< Debug Stop Mode */
+#define DBGMCU_CR_DBG_STANDBY ((uint32_t)0x00000004) /*!< Debug Standby mode */
+
+/****************** Bit definition for DBGMCU_APB1_FZ register **************/
+#define DBGMCU_APB1_FZ_DBG_TIM2_STOP ((uint32_t)0x00000001) /*!< TIM2 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM3_STOP ((uint32_t)0x00000002) /*!< TIM3 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM6_STOP ((uint32_t)0x00000010) /*!< TIM6 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM7_STOP ((uint32_t)0x00000020) /*!< TIM7 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM14_STOP ((uint32_t)0x00000100) /*!< TIM14 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_RTC_STOP ((uint32_t)0x00000400) /*!< RTC Calendar frozen when core is halted */
+#define DBGMCU_APB1_FZ_DBG_WWDG_STOP ((uint32_t)0x00000800) /*!< Debug Window Watchdog stopped when Core is halted */
+#define DBGMCU_APB1_FZ_DBG_IWDG_STOP ((uint32_t)0x00001000) /*!< Debug Independent Watchdog stopped when Core is halted */
+#define DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00200000) /*!< I2C1 SMBUS timeout mode stopped when Core is halted */
+#define DBGMCU_APB1_FZ_DBG_CAN_STOP ((uint32_t)0x02000000) /*!< CAN debug stopped when Core is halted */
+
+/****************** Bit definition for DBGMCU_APB2_FZ register **************/
+#define DBGMCU_APB2_FZ_DBG_TIM1_STOP ((uint32_t)0x00000800) /*!< TIM1 counter stopped when core is halted */
+#define DBGMCU_APB2_FZ_DBG_TIM15_STOP ((uint32_t)0x00010000) /*!< TIM15 counter stopped when core is halted */
+#define DBGMCU_APB2_FZ_DBG_TIM16_STOP ((uint32_t)0x00020000) /*!< TIM16 counter stopped when core is halted */
+#define DBGMCU_APB2_FZ_DBG_TIM17_STOP ((uint32_t)0x00040000) /*!< TIM17 counter stopped when core is halted */
+
+/******************************************************************************/
+/* */
+/* DMA Controller (DMA) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for DMA_ISR register ********************/
+#define DMA_ISR_GIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt flag */
+#define DMA_ISR_TCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete flag */
+#define DMA_ISR_HTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer flag */
+#define DMA_ISR_TEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error flag */
+#define DMA_ISR_GIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt flag */
+#define DMA_ISR_TCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete flag */
+#define DMA_ISR_HTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer flag */
+#define DMA_ISR_TEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error flag */
+#define DMA_ISR_GIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt flag */
+#define DMA_ISR_TCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete flag */
+#define DMA_ISR_HTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer flag */
+#define DMA_ISR_TEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error flag */
+#define DMA_ISR_GIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt flag */
+#define DMA_ISR_TCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete flag */
+#define DMA_ISR_HTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer flag */
+#define DMA_ISR_TEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error flag */
+#define DMA_ISR_GIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt flag */
+#define DMA_ISR_TCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete flag */
+#define DMA_ISR_HTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer flag */
+#define DMA_ISR_TEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error flag */
+#define DMA_ISR_GIF6 ((uint32_t)0x00100000) /*!< Channel 6 Global interrupt flag */
+#define DMA_ISR_TCIF6 ((uint32_t)0x00200000) /*!< Channel 6 Transfer Complete flag */
+#define DMA_ISR_HTIF6 ((uint32_t)0x00400000) /*!< Channel 6 Half Transfer flag */
+#define DMA_ISR_TEIF6 ((uint32_t)0x00800000) /*!< Channel 6 Transfer Error flag */
+#define DMA_ISR_GIF7 ((uint32_t)0x01000000) /*!< Channel 7 Global interrupt flag */
+#define DMA_ISR_TCIF7 ((uint32_t)0x02000000) /*!< Channel 7 Transfer Complete flag */
+#define DMA_ISR_HTIF7 ((uint32_t)0x04000000) /*!< Channel 7 Half Transfer flag */
+#define DMA_ISR_TEIF7 ((uint32_t)0x08000000) /*!< Channel 7 Transfer Error flag */
+
+/******************* Bit definition for DMA_IFCR register *******************/
+#define DMA_IFCR_CGIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt clear */
+#define DMA_IFCR_CTCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete clear */
+#define DMA_IFCR_CHTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer clear */
+#define DMA_IFCR_CTEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error clear */
+#define DMA_IFCR_CGIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt clear */
+#define DMA_IFCR_CTCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete clear */
+#define DMA_IFCR_CHTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer clear */
+#define DMA_IFCR_CTEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error clear */
+#define DMA_IFCR_CGIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt clear */
+#define DMA_IFCR_CTCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete clear */
+#define DMA_IFCR_CHTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer clear */
+#define DMA_IFCR_CTEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error clear */
+#define DMA_IFCR_CGIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt clear */
+#define DMA_IFCR_CTCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete clear */
+#define DMA_IFCR_CHTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer clear */
+#define DMA_IFCR_CTEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error clear */
+#define DMA_IFCR_CGIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt clear */
+#define DMA_IFCR_CTCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete clear */
+#define DMA_IFCR_CHTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer clear */
+#define DMA_IFCR_CTEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error clear */
+#define DMA_IFCR_CGIF6 ((uint32_t)0x00100000) /*!< Channel 6 Global interrupt clear */
+#define DMA_IFCR_CTCIF6 ((uint32_t)0x00200000) /*!< Channel 6 Transfer Complete clear */
+#define DMA_IFCR_CHTIF6 ((uint32_t)0x00400000) /*!< Channel 6 Half Transfer clear */
+#define DMA_IFCR_CTEIF6 ((uint32_t)0x00800000) /*!< Channel 6 Transfer Error clear */
+#define DMA_IFCR_CGIF7 ((uint32_t)0x01000000) /*!< Channel 7 Global interrupt clear */
+#define DMA_IFCR_CTCIF7 ((uint32_t)0x02000000) /*!< Channel 7 Transfer Complete clear */
+#define DMA_IFCR_CHTIF7 ((uint32_t)0x04000000) /*!< Channel 7 Half Transfer clear */
+#define DMA_IFCR_CTEIF7 ((uint32_t)0x08000000) /*!< Channel 7 Transfer Error clear */
+
+/******************* Bit definition for DMA_CCR register ********************/
+#define DMA_CCR_EN ((uint32_t)0x00000001) /*!< Channel enable */
+#define DMA_CCR_TCIE ((uint32_t)0x00000002) /*!< Transfer complete interrupt enable */
+#define DMA_CCR_HTIE ((uint32_t)0x00000004) /*!< Half Transfer interrupt enable */
+#define DMA_CCR_TEIE ((uint32_t)0x00000008) /*!< Transfer error interrupt enable */
+#define DMA_CCR_DIR ((uint32_t)0x00000010) /*!< Data transfer direction */
+#define DMA_CCR_CIRC ((uint32_t)0x00000020) /*!< Circular mode */
+#define DMA_CCR_PINC ((uint32_t)0x00000040) /*!< Peripheral increment mode */
+#define DMA_CCR_MINC ((uint32_t)0x00000080) /*!< Memory increment mode */
+
+#define DMA_CCR_PSIZE ((uint32_t)0x00000300) /*!< PSIZE[1:0] bits (Peripheral size) */
+#define DMA_CCR_PSIZE_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define DMA_CCR_PSIZE_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+
+#define DMA_CCR_MSIZE ((uint32_t)0x00000C00) /*!< MSIZE[1:0] bits (Memory size) */
+#define DMA_CCR_MSIZE_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define DMA_CCR_MSIZE_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+
+#define DMA_CCR_PL ((uint32_t)0x00003000) /*!< PL[1:0] bits(Channel Priority level)*/
+#define DMA_CCR_PL_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define DMA_CCR_PL_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+
+#define DMA_CCR_MEM2MEM ((uint32_t)0x00004000) /*!< Memory to memory mode */
+
+/****************** Bit definition for DMA_CNDTR register *******************/
+#define DMA_CNDTR_NDT ((uint32_t)0x0000FFFF) /*!< Number of data to Transfer */
+
+/****************** Bit definition for DMA_CPAR register ********************/
+#define DMA_CPAR_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */
+
+/****************** Bit definition for DMA_CMAR register ********************/
+#define DMA_CMAR_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */
+
+/******************************************************************************/
+/* */
+/* External Interrupt/Event Controller (EXTI) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for EXTI_IMR register *******************/
+#define EXTI_IMR_MR0 ((uint32_t)0x00000001) /*!< Interrupt Mask on line 0 */
+#define EXTI_IMR_MR1 ((uint32_t)0x00000002) /*!< Interrupt Mask on line 1 */
+#define EXTI_IMR_MR2 ((uint32_t)0x00000004) /*!< Interrupt Mask on line 2 */
+#define EXTI_IMR_MR3 ((uint32_t)0x00000008) /*!< Interrupt Mask on line 3 */
+#define EXTI_IMR_MR4 ((uint32_t)0x00000010) /*!< Interrupt Mask on line 4 */
+#define EXTI_IMR_MR5 ((uint32_t)0x00000020) /*!< Interrupt Mask on line 5 */
+#define EXTI_IMR_MR6 ((uint32_t)0x00000040) /*!< Interrupt Mask on line 6 */
+#define EXTI_IMR_MR7 ((uint32_t)0x00000080) /*!< Interrupt Mask on line 7 */
+#define EXTI_IMR_MR8 ((uint32_t)0x00000100) /*!< Interrupt Mask on line 8 */
+#define EXTI_IMR_MR9 ((uint32_t)0x00000200) /*!< Interrupt Mask on line 9 */
+#define EXTI_IMR_MR10 ((uint32_t)0x00000400) /*!< Interrupt Mask on line 10 */
+#define EXTI_IMR_MR11 ((uint32_t)0x00000800) /*!< Interrupt Mask on line 11 */
+#define EXTI_IMR_MR12 ((uint32_t)0x00001000) /*!< Interrupt Mask on line 12 */
+#define EXTI_IMR_MR13 ((uint32_t)0x00002000) /*!< Interrupt Mask on line 13 */
+#define EXTI_IMR_MR14 ((uint32_t)0x00004000) /*!< Interrupt Mask on line 14 */
+#define EXTI_IMR_MR15 ((uint32_t)0x00008000) /*!< Interrupt Mask on line 15 */
+#define EXTI_IMR_MR16 ((uint32_t)0x00010000) /*!< Interrupt Mask on line 16 */
+#define EXTI_IMR_MR17 ((uint32_t)0x00020000) /*!< Interrupt Mask on line 17 */
+#define EXTI_IMR_MR19 ((uint32_t)0x00080000) /*!< Interrupt Mask on line 19 */
+#define EXTI_IMR_MR21 ((uint32_t)0x00200000) /*!< Interrupt Mask on line 21 */
+#define EXTI_IMR_MR22 ((uint32_t)0x00400000) /*!< Interrupt Mask on line 22 */
+#define EXTI_IMR_MR23 ((uint32_t)0x00800000) /*!< Interrupt Mask on line 23 */
+#define EXTI_IMR_MR25 ((uint32_t)0x02000000) /*!< Interrupt Mask on line 25 */
+#define EXTI_IMR_MR27 ((uint32_t)0x08000000) /*!< Interrupt Mask on line 27 */
+
+/****************** Bit definition for EXTI_EMR register ********************/
+#define EXTI_EMR_MR0 ((uint32_t)0x00000001) /*!< Event Mask on line 0 */
+#define EXTI_EMR_MR1 ((uint32_t)0x00000002) /*!< Event Mask on line 1 */
+#define EXTI_EMR_MR2 ((uint32_t)0x00000004) /*!< Event Mask on line 2 */
+#define EXTI_EMR_MR3 ((uint32_t)0x00000008) /*!< Event Mask on line 3 */
+#define EXTI_EMR_MR4 ((uint32_t)0x00000010) /*!< Event Mask on line 4 */
+#define EXTI_EMR_MR5 ((uint32_t)0x00000020) /*!< Event Mask on line 5 */
+#define EXTI_EMR_MR6 ((uint32_t)0x00000040) /*!< Event Mask on line 6 */
+#define EXTI_EMR_MR7 ((uint32_t)0x00000080) /*!< Event Mask on line 7 */
+#define EXTI_EMR_MR8 ((uint32_t)0x00000100) /*!< Event Mask on line 8 */
+#define EXTI_EMR_MR9 ((uint32_t)0x00000200) /*!< Event Mask on line 9 */
+#define EXTI_EMR_MR10 ((uint32_t)0x00000400) /*!< Event Mask on line 10 */
+#define EXTI_EMR_MR11 ((uint32_t)0x00000800) /*!< Event Mask on line 11 */
+#define EXTI_EMR_MR12 ((uint32_t)0x00001000) /*!< Event Mask on line 12 */
+#define EXTI_EMR_MR13 ((uint32_t)0x00002000) /*!< Event Mask on line 13 */
+#define EXTI_EMR_MR14 ((uint32_t)0x00004000) /*!< Event Mask on line 14 */
+#define EXTI_EMR_MR15 ((uint32_t)0x00008000) /*!< Event Mask on line 15 */
+#define EXTI_EMR_MR16 ((uint32_t)0x00010000) /*!< Event Mask on line 16 */
+#define EXTI_EMR_MR17 ((uint32_t)0x00020000) /*!< Event Mask on line 17 */
+#define EXTI_EMR_MR19 ((uint32_t)0x00080000) /*!< Event Mask on line 19 */
+#define EXTI_EMR_MR21 ((uint32_t)0x00200000) /*!< Event Mask on line 21 */
+#define EXTI_EMR_MR22 ((uint32_t)0x00400000) /*!< Event Mask on line 22 */
+#define EXTI_EMR_MR23 ((uint32_t)0x00800000) /*!< Event Mask on line 23 */
+#define EXTI_EMR_MR25 ((uint32_t)0x02000000) /*!< Event Mask on line 25 */
+#define EXTI_EMR_MR27 ((uint32_t)0x08000000) /*!< Event Mask on line 27 */
+
+/******************* Bit definition for EXTI_RTSR register ******************/
+#define EXTI_RTSR_TR0 ((uint32_t)0x00000001) /*!< Rising trigger event configuration bit of line 0 */
+#define EXTI_RTSR_TR1 ((uint32_t)0x00000002) /*!< Rising trigger event configuration bit of line 1 */
+#define EXTI_RTSR_TR2 ((uint32_t)0x00000004) /*!< Rising trigger event configuration bit of line 2 */
+#define EXTI_RTSR_TR3 ((uint32_t)0x00000008) /*!< Rising trigger event configuration bit of line 3 */
+#define EXTI_RTSR_TR4 ((uint32_t)0x00000010) /*!< Rising trigger event configuration bit of line 4 */
+#define EXTI_RTSR_TR5 ((uint32_t)0x00000020) /*!< Rising trigger event configuration bit of line 5 */
+#define EXTI_RTSR_TR6 ((uint32_t)0x00000040) /*!< Rising trigger event configuration bit of line 6 */
+#define EXTI_RTSR_TR7 ((uint32_t)0x00000080) /*!< Rising trigger event configuration bit of line 7 */
+#define EXTI_RTSR_TR8 ((uint32_t)0x00000100) /*!< Rising trigger event configuration bit of line 8 */
+#define EXTI_RTSR_TR9 ((uint32_t)0x00000200) /*!< Rising trigger event configuration bit of line 9 */
+#define EXTI_RTSR_TR10 ((uint32_t)0x00000400) /*!< Rising trigger event configuration bit of line 10 */
+#define EXTI_RTSR_TR11 ((uint32_t)0x00000800) /*!< Rising trigger event configuration bit of line 11 */
+#define EXTI_RTSR_TR12 ((uint32_t)0x00001000) /*!< Rising trigger event configuration bit of line 12 */
+#define EXTI_RTSR_TR13 ((uint32_t)0x00002000) /*!< Rising trigger event configuration bit of line 13 */
+#define EXTI_RTSR_TR14 ((uint32_t)0x00004000) /*!< Rising trigger event configuration bit of line 14 */
+#define EXTI_RTSR_TR15 ((uint32_t)0x00008000) /*!< Rising trigger event configuration bit of line 15 */
+#define EXTI_RTSR_TR16 ((uint32_t)0x00010000) /*!< Rising trigger event configuration bit of line 16 */
+#define EXTI_RTSR_TR17 ((uint32_t)0x00020000) /*!< Rising trigger event configuration bit of line 17 */
+#define EXTI_RTSR_TR19 ((uint32_t)0x00080000) /*!< Rising trigger event configuration bit of line 19 */
+
+/******************* Bit definition for EXTI_FTSR register *******************/
+#define EXTI_FTSR_TR0 ((uint32_t)0x00000001) /*!< Falling trigger event configuration bit of line 0 */
+#define EXTI_FTSR_TR1 ((uint32_t)0x00000002) /*!< Falling trigger event configuration bit of line 1 */
+#define EXTI_FTSR_TR2 ((uint32_t)0x00000004) /*!< Falling trigger event configuration bit of line 2 */
+#define EXTI_FTSR_TR3 ((uint32_t)0x00000008) /*!< Falling trigger event configuration bit of line 3 */
+#define EXTI_FTSR_TR4 ((uint32_t)0x00000010) /*!< Falling trigger event configuration bit of line 4 */
+#define EXTI_FTSR_TR5 ((uint32_t)0x00000020) /*!< Falling trigger event configuration bit of line 5 */
+#define EXTI_FTSR_TR6 ((uint32_t)0x00000040) /*!< Falling trigger event configuration bit of line 6 */
+#define EXTI_FTSR_TR7 ((uint32_t)0x00000080) /*!< Falling trigger event configuration bit of line 7 */
+#define EXTI_FTSR_TR8 ((uint32_t)0x00000100) /*!< Falling trigger event configuration bit of line 8 */
+#define EXTI_FTSR_TR9 ((uint32_t)0x00000200) /*!< Falling trigger event configuration bit of line 9 */
+#define EXTI_FTSR_TR10 ((uint32_t)0x00000400) /*!< Falling trigger event configuration bit of line 10 */
+#define EXTI_FTSR_TR11 ((uint32_t)0x00000800) /*!< Falling trigger event configuration bit of line 11 */
+#define EXTI_FTSR_TR12 ((uint32_t)0x00001000) /*!< Falling trigger event configuration bit of line 12 */
+#define EXTI_FTSR_TR13 ((uint32_t)0x00002000) /*!< Falling trigger event configuration bit of line 13 */
+#define EXTI_FTSR_TR14 ((uint32_t)0x00004000) /*!< Falling trigger event configuration bit of line 14 */
+#define EXTI_FTSR_TR15 ((uint32_t)0x00008000) /*!< Falling trigger event configuration bit of line 15 */
+#define EXTI_FTSR_TR16 ((uint32_t)0x00010000) /*!< Falling trigger event configuration bit of line 16 */
+#define EXTI_FTSR_TR17 ((uint32_t)0x00020000) /*!< Falling trigger event configuration bit of line 17 */
+#define EXTI_FTSR_TR19 ((uint32_t)0x00080000) /*!< Falling trigger event configuration bit of line 19 */
+
+/******************* Bit definition for EXTI_SWIER register *******************/
+#define EXTI_SWIER_SWIER0 ((uint32_t)0x00000001) /*!< Software Interrupt on line 0 */
+#define EXTI_SWIER_SWIER1 ((uint32_t)0x00000002) /*!< Software Interrupt on line 1 */
+#define EXTI_SWIER_SWIER2 ((uint32_t)0x00000004) /*!< Software Interrupt on line 2 */
+#define EXTI_SWIER_SWIER3 ((uint32_t)0x00000008) /*!< Software Interrupt on line 3 */
+#define EXTI_SWIER_SWIER4 ((uint32_t)0x00000010) /*!< Software Interrupt on line 4 */
+#define EXTI_SWIER_SWIER5 ((uint32_t)0x00000020) /*!< Software Interrupt on line 5 */
+#define EXTI_SWIER_SWIER6 ((uint32_t)0x00000040) /*!< Software Interrupt on line 6 */
+#define EXTI_SWIER_SWIER7 ((uint32_t)0x00000080) /*!< Software Interrupt on line 7 */
+#define EXTI_SWIER_SWIER8 ((uint32_t)0x00000100) /*!< Software Interrupt on line 8 */
+#define EXTI_SWIER_SWIER9 ((uint32_t)0x00000200) /*!< Software Interrupt on line 9 */
+#define EXTI_SWIER_SWIER10 ((uint32_t)0x00000400) /*!< Software Interrupt on line 10 */
+#define EXTI_SWIER_SWIER11 ((uint32_t)0x00000800) /*!< Software Interrupt on line 11 */
+#define EXTI_SWIER_SWIER12 ((uint32_t)0x00001000) /*!< Software Interrupt on line 12 */
+#define EXTI_SWIER_SWIER13 ((uint32_t)0x00002000) /*!< Software Interrupt on line 13 */
+#define EXTI_SWIER_SWIER14 ((uint32_t)0x00004000) /*!< Software Interrupt on line 14 */
+#define EXTI_SWIER_SWIER15 ((uint32_t)0x00008000) /*!< Software Interrupt on line 15 */
+#define EXTI_SWIER_SWIER16 ((uint32_t)0x00010000) /*!< Software Interrupt on line 16 */
+#define EXTI_SWIER_SWIER17 ((uint32_t)0x00020000) /*!< Software Interrupt on line 17 */
+#define EXTI_SWIER_SWIER19 ((uint32_t)0x00080000) /*!< Software Interrupt on line 19 */
+
+/****************** Bit definition for EXTI_PR register *********************/
+#define EXTI_PR_PR0 ((uint32_t)0x00000001) /*!< Pending bit 0 */
+#define EXTI_PR_PR1 ((uint32_t)0x00000002) /*!< Pending bit 1 */
+#define EXTI_PR_PR2 ((uint32_t)0x00000004) /*!< Pending bit 2 */
+#define EXTI_PR_PR3 ((uint32_t)0x00000008) /*!< Pending bit 3 */
+#define EXTI_PR_PR4 ((uint32_t)0x00000010) /*!< Pending bit 4 */
+#define EXTI_PR_PR5 ((uint32_t)0x00000020) /*!< Pending bit 5 */
+#define EXTI_PR_PR6 ((uint32_t)0x00000040) /*!< Pending bit 6 */
+#define EXTI_PR_PR7 ((uint32_t)0x00000080) /*!< Pending bit 7 */
+#define EXTI_PR_PR8 ((uint32_t)0x00000100) /*!< Pending bit 8 */
+#define EXTI_PR_PR9 ((uint32_t)0x00000200) /*!< Pending bit 9 */
+#define EXTI_PR_PR10 ((uint32_t)0x00000400) /*!< Pending bit 10 */
+#define EXTI_PR_PR11 ((uint32_t)0x00000800) /*!< Pending bit 11 */
+#define EXTI_PR_PR12 ((uint32_t)0x00001000) /*!< Pending bit 12 */
+#define EXTI_PR_PR13 ((uint32_t)0x00002000) /*!< Pending bit 13 */
+#define EXTI_PR_PR14 ((uint32_t)0x00004000) /*!< Pending bit 14 */
+#define EXTI_PR_PR15 ((uint32_t)0x00008000) /*!< Pending bit 15 */
+#define EXTI_PR_PR16 ((uint32_t)0x00010000) /*!< Pending bit 16 */
+#define EXTI_PR_PR17 ((uint32_t)0x00020000) /*!< Pending bit 17 */
+#define EXTI_PR_PR19 ((uint32_t)0x00080000) /*!< Pending bit 19 */
+
+/******************************************************************************/
+/* */
+/* FLASH and Option Bytes Registers */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for FLASH_ACR register ******************/
+#define FLASH_ACR_LATENCY ((uint32_t)0x00000001) /*!< LATENCY bit (Latency) */
+
+#define FLASH_ACR_PRFTBE ((uint32_t)0x00000010) /*!< Prefetch Buffer Enable */
+#define FLASH_ACR_PRFTBS ((uint32_t)0x00000020) /*!< Prefetch Buffer Status */
+
+/****************** Bit definition for FLASH_KEYR register ******************/
+#define FLASH_KEYR_FKEYR ((uint32_t)0xFFFFFFFF) /*!< FPEC Key */
+
+/***************** Bit definition for FLASH_OPTKEYR register ****************/
+#define FLASH_OPTKEYR_OPTKEYR ((uint32_t)0xFFFFFFFF) /*!< Option Byte Key */
+
+/****************** FLASH Keys **********************************************/
+#define FLASH_FKEY1 ((uint32_t)0x45670123) /*!< Flash program erase key1 */
+#define FLASH_FKEY2 ((uint32_t)0xCDEF89AB) /*!< Flash program erase key2: used with FLASH_PEKEY1
+ to unlock the write access to the FPEC. */
+
+#define FLASH_OPTKEY1 ((uint32_t)0x45670123) /*!< Flash option key1 */
+#define FLASH_OPTKEY2 ((uint32_t)0xCDEF89AB) /*!< Flash option key2: used with FLASH_OPTKEY1 to
+ unlock the write access to the option byte block */
+
+/****************** Bit definition for FLASH_SR register *******************/
+#define FLASH_SR_BSY ((uint32_t)0x00000001) /*!< Busy */
+#define FLASH_SR_PGERR ((uint32_t)0x00000004) /*!< Programming Error */
+#define FLASH_SR_WRPRTERR ((uint32_t)0x00000010) /*!< Write Protection Error */
+#define FLASH_SR_EOP ((uint32_t)0x00000020) /*!< End of operation */
+#define FLASH_SR_WRPERR FLASH_SR_WRPRTERR /*!< Legacy of Write Protection Error */
+
+/******************* Bit definition for FLASH_CR register *******************/
+#define FLASH_CR_PG ((uint32_t)0x00000001) /*!< Programming */
+#define FLASH_CR_PER ((uint32_t)0x00000002) /*!< Page Erase */
+#define FLASH_CR_MER ((uint32_t)0x00000004) /*!< Mass Erase */
+#define FLASH_CR_OPTPG ((uint32_t)0x00000010) /*!< Option Byte Programming */
+#define FLASH_CR_OPTER ((uint32_t)0x00000020) /*!< Option Byte Erase */
+#define FLASH_CR_STRT ((uint32_t)0x00000040) /*!< Start */
+#define FLASH_CR_LOCK ((uint32_t)0x00000080) /*!< Lock */
+#define FLASH_CR_OPTWRE ((uint32_t)0x00000200) /*!< Option Bytes Write Enable */
+#define FLASH_CR_ERRIE ((uint32_t)0x00000400) /*!< Error Interrupt Enable */
+#define FLASH_CR_EOPIE ((uint32_t)0x00001000) /*!< End of operation interrupt enable */
+#define FLASH_CR_OBL_LAUNCH ((uint32_t)0x00002000) /*!< Option Bytes Loader Launch */
+
+/******************* Bit definition for FLASH_AR register *******************/
+#define FLASH_AR_FAR ((uint32_t)0xFFFFFFFF) /*!< Flash Address */
+
+/****************** Bit definition for FLASH_OBR register *******************/
+#define FLASH_OBR_OPTERR ((uint32_t)0x00000001) /*!< Option Byte Error */
+#define FLASH_OBR_RDPRT1 ((uint32_t)0x00000002) /*!< Read protection Level 1 */
+#define FLASH_OBR_RDPRT2 ((uint32_t)0x00000004) /*!< Read protection Level 2 */
+
+#define FLASH_OBR_USER ((uint32_t)0x00003700) /*!< User Option Bytes */
+#define FLASH_OBR_IWDG_SW ((uint32_t)0x00000100) /*!< IWDG SW */
+#define FLASH_OBR_nRST_STOP ((uint32_t)0x00000200) /*!< nRST_STOP */
+#define FLASH_OBR_nRST_STDBY ((uint32_t)0x00000400) /*!< nRST_STDBY */
+#define FLASH_OBR_nBOOT1 ((uint32_t)0x00001000) /*!< nBOOT1 */
+#define FLASH_OBR_VDDA_MONITOR ((uint32_t)0x00002000) /*!< VDDA power supply supervisor */
+
+/* Old BOOT1 bit definition, maintained for legacy purpose */
+#define FLASH_OBR_BOOT1 FLASH_OBR_nBOOT1
+
+/* Old OBR_VDDA bit definition, maintained for legacy purpose */
+#define FLASH_OBR_VDDA_ANALOG FLASH_OBR_VDDA_MONITOR
+
+/****************** Bit definition for FLASH_WRPR register ******************/
+#define FLASH_WRPR_WRP ((uint32_t)0x0000FFFF) /*!< Write Protect */
+
+/*----------------------------------------------------------------------------*/
+
+/****************** Bit definition for OB_RDP register **********************/
+#define OB_RDP_RDP ((uint32_t)0x000000FF) /*!< Read protection option byte */
+#define OB_RDP_nRDP ((uint32_t)0x0000FF00) /*!< Read protection complemented option byte */
+
+/****************** Bit definition for OB_USER register *********************/
+#define OB_USER_USER ((uint32_t)0x00FF0000) /*!< User option byte */
+#define OB_USER_nUSER ((uint32_t)0xFF000000) /*!< User complemented option byte */
+
+/****************** Bit definition for OB_WRP0 register *********************/
+#define OB_WRP0_WRP0 ((uint32_t)0x000000FF) /*!< Flash memory write protection option bytes */
+#define OB_WRP0_nWRP0 ((uint32_t)0x0000FF00) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for OB_WRP1 register *********************/
+#define OB_WRP1_WRP1 ((uint32_t)0x00FF0000) /*!< Flash memory write protection option bytes */
+#define OB_WRP1_nWRP1 ((uint32_t)0xFF000000) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for OB_WRP2 register *********************/
+#define OB_WRP2_WRP2 ((uint32_t)0x000000FF) /*!< Flash memory write protection option bytes */
+#define OB_WRP2_nWRP2 ((uint32_t)0x0000FF00) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for OB_WRP3 register *********************/
+#define OB_WRP3_WRP3 ((uint32_t)0x00FF0000) /*!< Flash memory write protection option bytes */
+#define OB_WRP3_nWRP3 ((uint32_t)0xFF000000) /*!< Flash memory write protection complemented option bytes */
+
+/******************************************************************************/
+/* */
+/* General Purpose IOs (GPIO) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for GPIO_MODER register *****************/
+#define GPIO_MODER_MODER0 ((uint32_t)0x00000003)
+#define GPIO_MODER_MODER0_0 ((uint32_t)0x00000001)
+#define GPIO_MODER_MODER0_1 ((uint32_t)0x00000002)
+#define GPIO_MODER_MODER1 ((uint32_t)0x0000000C)
+#define GPIO_MODER_MODER1_0 ((uint32_t)0x00000004)
+#define GPIO_MODER_MODER1_1 ((uint32_t)0x00000008)
+#define GPIO_MODER_MODER2 ((uint32_t)0x00000030)
+#define GPIO_MODER_MODER2_0 ((uint32_t)0x00000010)
+#define GPIO_MODER_MODER2_1 ((uint32_t)0x00000020)
+#define GPIO_MODER_MODER3 ((uint32_t)0x000000C0)
+#define GPIO_MODER_MODER3_0 ((uint32_t)0x00000040)
+#define GPIO_MODER_MODER3_1 ((uint32_t)0x00000080)
+#define GPIO_MODER_MODER4 ((uint32_t)0x00000300)
+#define GPIO_MODER_MODER4_0 ((uint32_t)0x00000100)
+#define GPIO_MODER_MODER4_1 ((uint32_t)0x00000200)
+#define GPIO_MODER_MODER5 ((uint32_t)0x00000C00)
+#define GPIO_MODER_MODER5_0 ((uint32_t)0x00000400)
+#define GPIO_MODER_MODER5_1 ((uint32_t)0x00000800)
+#define GPIO_MODER_MODER6 ((uint32_t)0x00003000)
+#define GPIO_MODER_MODER6_0 ((uint32_t)0x00001000)
+#define GPIO_MODER_MODER6_1 ((uint32_t)0x00002000)
+#define GPIO_MODER_MODER7 ((uint32_t)0x0000C000)
+#define GPIO_MODER_MODER7_0 ((uint32_t)0x00004000)
+#define GPIO_MODER_MODER7_1 ((uint32_t)0x00008000)
+#define GPIO_MODER_MODER8 ((uint32_t)0x00030000)
+#define GPIO_MODER_MODER8_0 ((uint32_t)0x00010000)
+#define GPIO_MODER_MODER8_1 ((uint32_t)0x00020000)
+#define GPIO_MODER_MODER9 ((uint32_t)0x000C0000)
+#define GPIO_MODER_MODER9_0 ((uint32_t)0x00040000)
+#define GPIO_MODER_MODER9_1 ((uint32_t)0x00080000)
+#define GPIO_MODER_MODER10 ((uint32_t)0x00300000)
+#define GPIO_MODER_MODER10_0 ((uint32_t)0x00100000)
+#define GPIO_MODER_MODER10_1 ((uint32_t)0x00200000)
+#define GPIO_MODER_MODER11 ((uint32_t)0x00C00000)
+#define GPIO_MODER_MODER11_0 ((uint32_t)0x00400000)
+#define GPIO_MODER_MODER11_1 ((uint32_t)0x00800000)
+#define GPIO_MODER_MODER12 ((uint32_t)0x03000000)
+#define GPIO_MODER_MODER12_0 ((uint32_t)0x01000000)
+#define GPIO_MODER_MODER12_1 ((uint32_t)0x02000000)
+#define GPIO_MODER_MODER13 ((uint32_t)0x0C000000)
+#define GPIO_MODER_MODER13_0 ((uint32_t)0x04000000)
+#define GPIO_MODER_MODER13_1 ((uint32_t)0x08000000)
+#define GPIO_MODER_MODER14 ((uint32_t)0x30000000)
+#define GPIO_MODER_MODER14_0 ((uint32_t)0x10000000)
+#define GPIO_MODER_MODER14_1 ((uint32_t)0x20000000)
+#define GPIO_MODER_MODER15 ((uint32_t)0xC0000000)
+#define GPIO_MODER_MODER15_0 ((uint32_t)0x40000000)
+#define GPIO_MODER_MODER15_1 ((uint32_t)0x80000000)
+
+/****************** Bit definition for GPIO_OTYPER register *****************/
+#define GPIO_OTYPER_OT_0 ((uint32_t)0x00000001)
+#define GPIO_OTYPER_OT_1 ((uint32_t)0x00000002)
+#define GPIO_OTYPER_OT_2 ((uint32_t)0x00000004)
+#define GPIO_OTYPER_OT_3 ((uint32_t)0x00000008)
+#define GPIO_OTYPER_OT_4 ((uint32_t)0x00000010)
+#define GPIO_OTYPER_OT_5 ((uint32_t)0x00000020)
+#define GPIO_OTYPER_OT_6 ((uint32_t)0x00000040)
+#define GPIO_OTYPER_OT_7 ((uint32_t)0x00000080)
+#define GPIO_OTYPER_OT_8 ((uint32_t)0x00000100)
+#define GPIO_OTYPER_OT_9 ((uint32_t)0x00000200)
+#define GPIO_OTYPER_OT_10 ((uint32_t)0x00000400)
+#define GPIO_OTYPER_OT_11 ((uint32_t)0x00000800)
+#define GPIO_OTYPER_OT_12 ((uint32_t)0x00001000)
+#define GPIO_OTYPER_OT_13 ((uint32_t)0x00002000)
+#define GPIO_OTYPER_OT_14 ((uint32_t)0x00004000)
+#define GPIO_OTYPER_OT_15 ((uint32_t)0x00008000)
+
+/**************** Bit definition for GPIO_OSPEEDR register ******************/
+#define GPIO_OSPEEDR_OSPEEDR0 ((uint32_t)0x00000003)
+#define GPIO_OSPEEDR_OSPEEDR0_0 ((uint32_t)0x00000001)
+#define GPIO_OSPEEDR_OSPEEDR0_1 ((uint32_t)0x00000002)
+#define GPIO_OSPEEDR_OSPEEDR1 ((uint32_t)0x0000000C)
+#define GPIO_OSPEEDR_OSPEEDR1_0 ((uint32_t)0x00000004)
+#define GPIO_OSPEEDR_OSPEEDR1_1 ((uint32_t)0x00000008)
+#define GPIO_OSPEEDR_OSPEEDR2 ((uint32_t)0x00000030)
+#define GPIO_OSPEEDR_OSPEEDR2_0 ((uint32_t)0x00000010)
+#define GPIO_OSPEEDR_OSPEEDR2_1 ((uint32_t)0x00000020)
+#define GPIO_OSPEEDR_OSPEEDR3 ((uint32_t)0x000000C0)
+#define GPIO_OSPEEDR_OSPEEDR3_0 ((uint32_t)0x00000040)
+#define GPIO_OSPEEDR_OSPEEDR3_1 ((uint32_t)0x00000080)
+#define GPIO_OSPEEDR_OSPEEDR4 ((uint32_t)0x00000300)
+#define GPIO_OSPEEDR_OSPEEDR4_0 ((uint32_t)0x00000100)
+#define GPIO_OSPEEDR_OSPEEDR4_1 ((uint32_t)0x00000200)
+#define GPIO_OSPEEDR_OSPEEDR5 ((uint32_t)0x00000C00)
+#define GPIO_OSPEEDR_OSPEEDR5_0 ((uint32_t)0x00000400)
+#define GPIO_OSPEEDR_OSPEEDR5_1 ((uint32_t)0x00000800)
+#define GPIO_OSPEEDR_OSPEEDR6 ((uint32_t)0x00003000)
+#define GPIO_OSPEEDR_OSPEEDR6_0 ((uint32_t)0x00001000)
+#define GPIO_OSPEEDR_OSPEEDR6_1 ((uint32_t)0x00002000)
+#define GPIO_OSPEEDR_OSPEEDR7 ((uint32_t)0x0000C000)
+#define GPIO_OSPEEDR_OSPEEDR7_0 ((uint32_t)0x00004000)
+#define GPIO_OSPEEDR_OSPEEDR7_1 ((uint32_t)0x00008000)
+#define GPIO_OSPEEDR_OSPEEDR8 ((uint32_t)0x00030000)
+#define GPIO_OSPEEDR_OSPEEDR8_0 ((uint32_t)0x00010000)
+#define GPIO_OSPEEDR_OSPEEDR8_1 ((uint32_t)0x00020000)
+#define GPIO_OSPEEDR_OSPEEDR9 ((uint32_t)0x000C0000)
+#define GPIO_OSPEEDR_OSPEEDR9_0 ((uint32_t)0x00040000)
+#define GPIO_OSPEEDR_OSPEEDR9_1 ((uint32_t)0x00080000)
+#define GPIO_OSPEEDR_OSPEEDR10 ((uint32_t)0x00300000)
+#define GPIO_OSPEEDR_OSPEEDR10_0 ((uint32_t)0x00100000)
+#define GPIO_OSPEEDR_OSPEEDR10_1 ((uint32_t)0x00200000)
+#define GPIO_OSPEEDR_OSPEEDR11 ((uint32_t)0x00C00000)
+#define GPIO_OSPEEDR_OSPEEDR11_0 ((uint32_t)0x00400000)
+#define GPIO_OSPEEDR_OSPEEDR11_1 ((uint32_t)0x00800000)
+#define GPIO_OSPEEDR_OSPEEDR12 ((uint32_t)0x03000000)
+#define GPIO_OSPEEDR_OSPEEDR12_0 ((uint32_t)0x01000000)
+#define GPIO_OSPEEDR_OSPEEDR12_1 ((uint32_t)0x02000000)
+#define GPIO_OSPEEDR_OSPEEDR13 ((uint32_t)0x0C000000)
+#define GPIO_OSPEEDR_OSPEEDR13_0 ((uint32_t)0x04000000)
+#define GPIO_OSPEEDR_OSPEEDR13_1 ((uint32_t)0x08000000)
+#define GPIO_OSPEEDR_OSPEEDR14 ((uint32_t)0x30000000)
+#define GPIO_OSPEEDR_OSPEEDR14_0 ((uint32_t)0x10000000)
+#define GPIO_OSPEEDR_OSPEEDR14_1 ((uint32_t)0x20000000)
+#define GPIO_OSPEEDR_OSPEEDR15 ((uint32_t)0xC0000000)
+#define GPIO_OSPEEDR_OSPEEDR15_0 ((uint32_t)0x40000000)
+#define GPIO_OSPEEDR_OSPEEDR15_1 ((uint32_t)0x80000000)
+
+/* Old Bit definition for GPIO_OSPEEDR register maintained for legacy purpose */
+#define GPIO_OSPEEDER_OSPEEDR0 GPIO_OSPEEDR_OSPEEDR0
+#define GPIO_OSPEEDER_OSPEEDR0_0 GPIO_OSPEEDR_OSPEEDR0_0
+#define GPIO_OSPEEDER_OSPEEDR0_1 GPIO_OSPEEDR_OSPEEDR0_1
+#define GPIO_OSPEEDER_OSPEEDR1 GPIO_OSPEEDR_OSPEEDR1
+#define GPIO_OSPEEDER_OSPEEDR1_0 GPIO_OSPEEDR_OSPEEDR1_0
+#define GPIO_OSPEEDER_OSPEEDR1_1 GPIO_OSPEEDR_OSPEEDR1_1
+#define GPIO_OSPEEDER_OSPEEDR2 GPIO_OSPEEDR_OSPEEDR2
+#define GPIO_OSPEEDER_OSPEEDR2_0 GPIO_OSPEEDR_OSPEEDR2_0
+#define GPIO_OSPEEDER_OSPEEDR2_1 GPIO_OSPEEDR_OSPEEDR2_1
+#define GPIO_OSPEEDER_OSPEEDR3 GPIO_OSPEEDR_OSPEEDR3
+#define GPIO_OSPEEDER_OSPEEDR3_0 GPIO_OSPEEDR_OSPEEDR3_0
+#define GPIO_OSPEEDER_OSPEEDR3_1 GPIO_OSPEEDR_OSPEEDR3_1
+#define GPIO_OSPEEDER_OSPEEDR4 GPIO_OSPEEDR_OSPEEDR4
+#define GPIO_OSPEEDER_OSPEEDR4_0 GPIO_OSPEEDR_OSPEEDR4_0
+#define GPIO_OSPEEDER_OSPEEDR4_1 GPIO_OSPEEDR_OSPEEDR4_1
+#define GPIO_OSPEEDER_OSPEEDR5 GPIO_OSPEEDR_OSPEEDR5
+#define GPIO_OSPEEDER_OSPEEDR5_0 GPIO_OSPEEDR_OSPEEDR5_0
+#define GPIO_OSPEEDER_OSPEEDR5_1 GPIO_OSPEEDR_OSPEEDR5_1
+#define GPIO_OSPEEDER_OSPEEDR6 GPIO_OSPEEDR_OSPEEDR6
+#define GPIO_OSPEEDER_OSPEEDR6_0 GPIO_OSPEEDR_OSPEEDR6_0
+#define GPIO_OSPEEDER_OSPEEDR6_1 GPIO_OSPEEDR_OSPEEDR6_1
+#define GPIO_OSPEEDER_OSPEEDR7 GPIO_OSPEEDR_OSPEEDR7
+#define GPIO_OSPEEDER_OSPEEDR7_0 GPIO_OSPEEDR_OSPEEDR7_0
+#define GPIO_OSPEEDER_OSPEEDR7_1 GPIO_OSPEEDR_OSPEEDR7_1
+#define GPIO_OSPEEDER_OSPEEDR8 GPIO_OSPEEDR_OSPEEDR8
+#define GPIO_OSPEEDER_OSPEEDR8_0 GPIO_OSPEEDR_OSPEEDR8_0
+#define GPIO_OSPEEDER_OSPEEDR8_1 GPIO_OSPEEDR_OSPEEDR8_1
+#define GPIO_OSPEEDER_OSPEEDR9 GPIO_OSPEEDR_OSPEEDR9
+#define GPIO_OSPEEDER_OSPEEDR9_0 GPIO_OSPEEDR_OSPEEDR9_0
+#define GPIO_OSPEEDER_OSPEEDR9_1 GPIO_OSPEEDR_OSPEEDR9_1
+#define GPIO_OSPEEDER_OSPEEDR10 GPIO_OSPEEDR_OSPEEDR10
+#define GPIO_OSPEEDER_OSPEEDR10_0 GPIO_OSPEEDR_OSPEEDR10_0
+#define GPIO_OSPEEDER_OSPEEDR10_1 GPIO_OSPEEDR_OSPEEDR10_1
+#define GPIO_OSPEEDER_OSPEEDR11 GPIO_OSPEEDR_OSPEEDR11
+#define GPIO_OSPEEDER_OSPEEDR11_0 GPIO_OSPEEDR_OSPEEDR11_0
+#define GPIO_OSPEEDER_OSPEEDR11_1 GPIO_OSPEEDR_OSPEEDR11_1
+#define GPIO_OSPEEDER_OSPEEDR12 GPIO_OSPEEDR_OSPEEDR12
+#define GPIO_OSPEEDER_OSPEEDR12_0 GPIO_OSPEEDR_OSPEEDR12_0
+#define GPIO_OSPEEDER_OSPEEDR12_1 GPIO_OSPEEDR_OSPEEDR12_1
+#define GPIO_OSPEEDER_OSPEEDR13 GPIO_OSPEEDR_OSPEEDR13
+#define GPIO_OSPEEDER_OSPEEDR13_0 GPIO_OSPEEDR_OSPEEDR13_0
+#define GPIO_OSPEEDER_OSPEEDR13_1 GPIO_OSPEEDR_OSPEEDR13_1
+#define GPIO_OSPEEDER_OSPEEDR14 GPIO_OSPEEDR_OSPEEDR14
+#define GPIO_OSPEEDER_OSPEEDR14_0 GPIO_OSPEEDR_OSPEEDR14_0
+#define GPIO_OSPEEDER_OSPEEDR14_1 GPIO_OSPEEDR_OSPEEDR14_1
+#define GPIO_OSPEEDER_OSPEEDR15 GPIO_OSPEEDR_OSPEEDR15
+#define GPIO_OSPEEDER_OSPEEDR15_0 GPIO_OSPEEDR_OSPEEDR15_0
+#define GPIO_OSPEEDER_OSPEEDR15_1 GPIO_OSPEEDR_OSPEEDR15_1
+
+/******************* Bit definition for GPIO_PUPDR register ******************/
+#define GPIO_PUPDR_PUPDR0 ((uint32_t)0x00000003)
+#define GPIO_PUPDR_PUPDR0_0 ((uint32_t)0x00000001)
+#define GPIO_PUPDR_PUPDR0_1 ((uint32_t)0x00000002)
+#define GPIO_PUPDR_PUPDR1 ((uint32_t)0x0000000C)
+#define GPIO_PUPDR_PUPDR1_0 ((uint32_t)0x00000004)
+#define GPIO_PUPDR_PUPDR1_1 ((uint32_t)0x00000008)
+#define GPIO_PUPDR_PUPDR2 ((uint32_t)0x00000030)
+#define GPIO_PUPDR_PUPDR2_0 ((uint32_t)0x00000010)
+#define GPIO_PUPDR_PUPDR2_1 ((uint32_t)0x00000020)
+#define GPIO_PUPDR_PUPDR3 ((uint32_t)0x000000C0)
+#define GPIO_PUPDR_PUPDR3_0 ((uint32_t)0x00000040)
+#define GPIO_PUPDR_PUPDR3_1 ((uint32_t)0x00000080)
+#define GPIO_PUPDR_PUPDR4 ((uint32_t)0x00000300)
+#define GPIO_PUPDR_PUPDR4_0 ((uint32_t)0x00000100)
+#define GPIO_PUPDR_PUPDR4_1 ((uint32_t)0x00000200)
+#define GPIO_PUPDR_PUPDR5 ((uint32_t)0x00000C00)
+#define GPIO_PUPDR_PUPDR5_0 ((uint32_t)0x00000400)
+#define GPIO_PUPDR_PUPDR5_1 ((uint32_t)0x00000800)
+#define GPIO_PUPDR_PUPDR6 ((uint32_t)0x00003000)
+#define GPIO_PUPDR_PUPDR6_0 ((uint32_t)0x00001000)
+#define GPIO_PUPDR_PUPDR6_1 ((uint32_t)0x00002000)
+#define GPIO_PUPDR_PUPDR7 ((uint32_t)0x0000C000)
+#define GPIO_PUPDR_PUPDR7_0 ((uint32_t)0x00004000)
+#define GPIO_PUPDR_PUPDR7_1 ((uint32_t)0x00008000)
+#define GPIO_PUPDR_PUPDR8 ((uint32_t)0x00030000)
+#define GPIO_PUPDR_PUPDR8_0 ((uint32_t)0x00010000)
+#define GPIO_PUPDR_PUPDR8_1 ((uint32_t)0x00020000)
+#define GPIO_PUPDR_PUPDR9 ((uint32_t)0x000C0000)
+#define GPIO_PUPDR_PUPDR9_0 ((uint32_t)0x00040000)
+#define GPIO_PUPDR_PUPDR9_1 ((uint32_t)0x00080000)
+#define GPIO_PUPDR_PUPDR10 ((uint32_t)0x00300000)
+#define GPIO_PUPDR_PUPDR10_0 ((uint32_t)0x00100000)
+#define GPIO_PUPDR_PUPDR10_1 ((uint32_t)0x00200000)
+#define GPIO_PUPDR_PUPDR11 ((uint32_t)0x00C00000)
+#define GPIO_PUPDR_PUPDR11_0 ((uint32_t)0x00400000)
+#define GPIO_PUPDR_PUPDR11_1 ((uint32_t)0x00800000)
+#define GPIO_PUPDR_PUPDR12 ((uint32_t)0x03000000)
+#define GPIO_PUPDR_PUPDR12_0 ((uint32_t)0x01000000)
+#define GPIO_PUPDR_PUPDR12_1 ((uint32_t)0x02000000)
+#define GPIO_PUPDR_PUPDR13 ((uint32_t)0x0C000000)
+#define GPIO_PUPDR_PUPDR13_0 ((uint32_t)0x04000000)
+#define GPIO_PUPDR_PUPDR13_1 ((uint32_t)0x08000000)
+#define GPIO_PUPDR_PUPDR14 ((uint32_t)0x30000000)
+#define GPIO_PUPDR_PUPDR14_0 ((uint32_t)0x10000000)
+#define GPIO_PUPDR_PUPDR14_1 ((uint32_t)0x20000000)
+#define GPIO_PUPDR_PUPDR15 ((uint32_t)0xC0000000)
+#define GPIO_PUPDR_PUPDR15_0 ((uint32_t)0x40000000)
+#define GPIO_PUPDR_PUPDR15_1 ((uint32_t)0x80000000)
+
+/******************* Bit definition for GPIO_IDR register *******************/
+#define GPIO_IDR_0 ((uint32_t)0x00000001)
+#define GPIO_IDR_1 ((uint32_t)0x00000002)
+#define GPIO_IDR_2 ((uint32_t)0x00000004)
+#define GPIO_IDR_3 ((uint32_t)0x00000008)
+#define GPIO_IDR_4 ((uint32_t)0x00000010)
+#define GPIO_IDR_5 ((uint32_t)0x00000020)
+#define GPIO_IDR_6 ((uint32_t)0x00000040)
+#define GPIO_IDR_7 ((uint32_t)0x00000080)
+#define GPIO_IDR_8 ((uint32_t)0x00000100)
+#define GPIO_IDR_9 ((uint32_t)0x00000200)
+#define GPIO_IDR_10 ((uint32_t)0x00000400)
+#define GPIO_IDR_11 ((uint32_t)0x00000800)
+#define GPIO_IDR_12 ((uint32_t)0x00001000)
+#define GPIO_IDR_13 ((uint32_t)0x00002000)
+#define GPIO_IDR_14 ((uint32_t)0x00004000)
+#define GPIO_IDR_15 ((uint32_t)0x00008000)
+
+/****************** Bit definition for GPIO_ODR register ********************/
+#define GPIO_ODR_0 ((uint32_t)0x00000001)
+#define GPIO_ODR_1 ((uint32_t)0x00000002)
+#define GPIO_ODR_2 ((uint32_t)0x00000004)
+#define GPIO_ODR_3 ((uint32_t)0x00000008)
+#define GPIO_ODR_4 ((uint32_t)0x00000010)
+#define GPIO_ODR_5 ((uint32_t)0x00000020)
+#define GPIO_ODR_6 ((uint32_t)0x00000040)
+#define GPIO_ODR_7 ((uint32_t)0x00000080)
+#define GPIO_ODR_8 ((uint32_t)0x00000100)
+#define GPIO_ODR_9 ((uint32_t)0x00000200)
+#define GPIO_ODR_10 ((uint32_t)0x00000400)
+#define GPIO_ODR_11 ((uint32_t)0x00000800)
+#define GPIO_ODR_12 ((uint32_t)0x00001000)
+#define GPIO_ODR_13 ((uint32_t)0x00002000)
+#define GPIO_ODR_14 ((uint32_t)0x00004000)
+#define GPIO_ODR_15 ((uint32_t)0x00008000)
+
+/****************** Bit definition for GPIO_BSRR register ********************/
+#define GPIO_BSRR_BS_0 ((uint32_t)0x00000001)
+#define GPIO_BSRR_BS_1 ((uint32_t)0x00000002)
+#define GPIO_BSRR_BS_2 ((uint32_t)0x00000004)
+#define GPIO_BSRR_BS_3 ((uint32_t)0x00000008)
+#define GPIO_BSRR_BS_4 ((uint32_t)0x00000010)
+#define GPIO_BSRR_BS_5 ((uint32_t)0x00000020)
+#define GPIO_BSRR_BS_6 ((uint32_t)0x00000040)
+#define GPIO_BSRR_BS_7 ((uint32_t)0x00000080)
+#define GPIO_BSRR_BS_8 ((uint32_t)0x00000100)
+#define GPIO_BSRR_BS_9 ((uint32_t)0x00000200)
+#define GPIO_BSRR_BS_10 ((uint32_t)0x00000400)
+#define GPIO_BSRR_BS_11 ((uint32_t)0x00000800)
+#define GPIO_BSRR_BS_12 ((uint32_t)0x00001000)
+#define GPIO_BSRR_BS_13 ((uint32_t)0x00002000)
+#define GPIO_BSRR_BS_14 ((uint32_t)0x00004000)
+#define GPIO_BSRR_BS_15 ((uint32_t)0x00008000)
+#define GPIO_BSRR_BR_0 ((uint32_t)0x00010000)
+#define GPIO_BSRR_BR_1 ((uint32_t)0x00020000)
+#define GPIO_BSRR_BR_2 ((uint32_t)0x00040000)
+#define GPIO_BSRR_BR_3 ((uint32_t)0x00080000)
+#define GPIO_BSRR_BR_4 ((uint32_t)0x00100000)
+#define GPIO_BSRR_BR_5 ((uint32_t)0x00200000)
+#define GPIO_BSRR_BR_6 ((uint32_t)0x00400000)
+#define GPIO_BSRR_BR_7 ((uint32_t)0x00800000)
+#define GPIO_BSRR_BR_8 ((uint32_t)0x01000000)
+#define GPIO_BSRR_BR_9 ((uint32_t)0x02000000)
+#define GPIO_BSRR_BR_10 ((uint32_t)0x04000000)
+#define GPIO_BSRR_BR_11 ((uint32_t)0x08000000)
+#define GPIO_BSRR_BR_12 ((uint32_t)0x10000000)
+#define GPIO_BSRR_BR_13 ((uint32_t)0x20000000)
+#define GPIO_BSRR_BR_14 ((uint32_t)0x40000000)
+#define GPIO_BSRR_BR_15 ((uint32_t)0x80000000)
+
+/****************** Bit definition for GPIO_LCKR register ********************/
+#define GPIO_LCKR_LCK0 ((uint32_t)0x00000001)
+#define GPIO_LCKR_LCK1 ((uint32_t)0x00000002)
+#define GPIO_LCKR_LCK2 ((uint32_t)0x00000004)
+#define GPIO_LCKR_LCK3 ((uint32_t)0x00000008)
+#define GPIO_LCKR_LCK4 ((uint32_t)0x00000010)
+#define GPIO_LCKR_LCK5 ((uint32_t)0x00000020)
+#define GPIO_LCKR_LCK6 ((uint32_t)0x00000040)
+#define GPIO_LCKR_LCK7 ((uint32_t)0x00000080)
+#define GPIO_LCKR_LCK8 ((uint32_t)0x00000100)
+#define GPIO_LCKR_LCK9 ((uint32_t)0x00000200)
+#define GPIO_LCKR_LCK10 ((uint32_t)0x00000400)
+#define GPIO_LCKR_LCK11 ((uint32_t)0x00000800)
+#define GPIO_LCKR_LCK12 ((uint32_t)0x00001000)
+#define GPIO_LCKR_LCK13 ((uint32_t)0x00002000)
+#define GPIO_LCKR_LCK14 ((uint32_t)0x00004000)
+#define GPIO_LCKR_LCK15 ((uint32_t)0x00008000)
+#define GPIO_LCKR_LCKK ((uint32_t)0x00010000)
+
+/****************** Bit definition for GPIO_AFRL register ********************/
+#define GPIO_AFRL_AFRL0 ((uint32_t)0x0000000F)
+#define GPIO_AFRL_AFRL1 ((uint32_t)0x000000F0)
+#define GPIO_AFRL_AFRL2 ((uint32_t)0x00000F00)
+#define GPIO_AFRL_AFRL3 ((uint32_t)0x0000F000)
+#define GPIO_AFRL_AFRL4 ((uint32_t)0x000F0000)
+#define GPIO_AFRL_AFRL5 ((uint32_t)0x00F00000)
+#define GPIO_AFRL_AFRL6 ((uint32_t)0x0F000000)
+#define GPIO_AFRL_AFRL7 ((uint32_t)0xF0000000)
+
+/****************** Bit definition for GPIO_AFRH register ********************/
+#define GPIO_AFRH_AFRH0 ((uint32_t)0x0000000F)
+#define GPIO_AFRH_AFRH1 ((uint32_t)0x000000F0)
+#define GPIO_AFRH_AFRH2 ((uint32_t)0x00000F00)
+#define GPIO_AFRH_AFRH3 ((uint32_t)0x0000F000)
+#define GPIO_AFRH_AFRH4 ((uint32_t)0x000F0000)
+#define GPIO_AFRH_AFRH5 ((uint32_t)0x00F00000)
+#define GPIO_AFRH_AFRH6 ((uint32_t)0x0F000000)
+#define GPIO_AFRH_AFRH7 ((uint32_t)0xF0000000)
+
+/****************** Bit definition for GPIO_BRR register *********************/
+#define GPIO_BRR_BR_0 ((uint32_t)0x00000001)
+#define GPIO_BRR_BR_1 ((uint32_t)0x00000002)
+#define GPIO_BRR_BR_2 ((uint32_t)0x00000004)
+#define GPIO_BRR_BR_3 ((uint32_t)0x00000008)
+#define GPIO_BRR_BR_4 ((uint32_t)0x00000010)
+#define GPIO_BRR_BR_5 ((uint32_t)0x00000020)
+#define GPIO_BRR_BR_6 ((uint32_t)0x00000040)
+#define GPIO_BRR_BR_7 ((uint32_t)0x00000080)
+#define GPIO_BRR_BR_8 ((uint32_t)0x00000100)
+#define GPIO_BRR_BR_9 ((uint32_t)0x00000200)
+#define GPIO_BRR_BR_10 ((uint32_t)0x00000400)
+#define GPIO_BRR_BR_11 ((uint32_t)0x00000800)
+#define GPIO_BRR_BR_12 ((uint32_t)0x00001000)
+#define GPIO_BRR_BR_13 ((uint32_t)0x00002000)
+#define GPIO_BRR_BR_14 ((uint32_t)0x00004000)
+#define GPIO_BRR_BR_15 ((uint32_t)0x00008000)
+
+/******************************************************************************/
+/* */
+/* Inter-integrated Circuit Interface (I2C) */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for I2C_CR1 register *******************/
+#define I2C_CR1_PE ((uint32_t)0x00000001) /*!< Peripheral enable */
+#define I2C_CR1_TXIE ((uint32_t)0x00000002) /*!< TX interrupt enable */
+#define I2C_CR1_RXIE ((uint32_t)0x00000004) /*!< RX interrupt enable */
+#define I2C_CR1_ADDRIE ((uint32_t)0x00000008) /*!< Address match interrupt enable */
+#define I2C_CR1_NACKIE ((uint32_t)0x00000010) /*!< NACK received interrupt enable */
+#define I2C_CR1_STOPIE ((uint32_t)0x00000020) /*!< STOP detection interrupt enable */
+#define I2C_CR1_TCIE ((uint32_t)0x00000040) /*!< Transfer complete interrupt enable */
+#define I2C_CR1_ERRIE ((uint32_t)0x00000080) /*!< Errors interrupt enable */
+#define I2C_CR1_DFN ((uint32_t)0x00000F00) /*!< Digital noise filter */
+#define I2C_CR1_ANFOFF ((uint32_t)0x00001000) /*!< Analog noise filter OFF */
+#define I2C_CR1_SWRST ((uint32_t)0x00002000) /*!< Software reset */
+#define I2C_CR1_TXDMAEN ((uint32_t)0x00004000) /*!< DMA transmission requests enable */
+#define I2C_CR1_RXDMAEN ((uint32_t)0x00008000) /*!< DMA reception requests enable */
+#define I2C_CR1_SBC ((uint32_t)0x00010000) /*!< Slave byte control */
+#define I2C_CR1_NOSTRETCH ((uint32_t)0x00020000) /*!< Clock stretching disable */
+#define I2C_CR1_WUPEN ((uint32_t)0x00040000) /*!< Wakeup from STOP enable */
+#define I2C_CR1_GCEN ((uint32_t)0x00080000) /*!< General call enable */
+#define I2C_CR1_SMBHEN ((uint32_t)0x00100000) /*!< SMBus host address enable */
+#define I2C_CR1_SMBDEN ((uint32_t)0x00200000) /*!< SMBus device default address enable */
+#define I2C_CR1_ALERTEN ((uint32_t)0x00400000) /*!< SMBus alert enable */
+#define I2C_CR1_PECEN ((uint32_t)0x00800000) /*!< PEC enable */
+
+/****************** Bit definition for I2C_CR2 register ********************/
+#define I2C_CR2_SADD ((uint32_t)0x000003FF) /*!< Slave address (master mode) */
+#define I2C_CR2_RD_WRN ((uint32_t)0x00000400) /*!< Transfer direction (master mode) */
+#define I2C_CR2_ADD10 ((uint32_t)0x00000800) /*!< 10-bit addressing mode (master mode) */
+#define I2C_CR2_HEAD10R ((uint32_t)0x00001000) /*!< 10-bit address header only read direction (master mode) */
+#define I2C_CR2_START ((uint32_t)0x00002000) /*!< START generation */
+#define I2C_CR2_STOP ((uint32_t)0x00004000) /*!< STOP generation (master mode) */
+#define I2C_CR2_NACK ((uint32_t)0x00008000) /*!< NACK generation (slave mode) */
+#define I2C_CR2_NBYTES ((uint32_t)0x00FF0000) /*!< Number of bytes */
+#define I2C_CR2_RELOAD ((uint32_t)0x01000000) /*!< NBYTES reload mode */
+#define I2C_CR2_AUTOEND ((uint32_t)0x02000000) /*!< Automatic end mode (master mode) */
+#define I2C_CR2_PECBYTE ((uint32_t)0x04000000) /*!< Packet error checking byte */
+
+/******************* Bit definition for I2C_OAR1 register ******************/
+#define I2C_OAR1_OA1 ((uint32_t)0x000003FF) /*!< Interface own address 1 */
+#define I2C_OAR1_OA1MODE ((uint32_t)0x00000400) /*!< Own address 1 10-bit mode */
+#define I2C_OAR1_OA1EN ((uint32_t)0x00008000) /*!< Own address 1 enable */
+
+/******************* Bit definition for I2C_OAR2 register ******************/
+#define I2C_OAR2_OA2 ((uint32_t)0x000000FE) /*!< Interface own address 2 */
+#define I2C_OAR2_OA2MSK ((uint32_t)0x00000700) /*!< Own address 2 masks */
+#define I2C_OAR2_OA2EN ((uint32_t)0x00008000) /*!< Own address 2 enable */
+
+/******************* Bit definition for I2C_TIMINGR register ****************/
+#define I2C_TIMINGR_SCLL ((uint32_t)0x000000FF) /*!< SCL low period (master mode) */
+#define I2C_TIMINGR_SCLH ((uint32_t)0x0000FF00) /*!< SCL high period (master mode) */
+#define I2C_TIMINGR_SDADEL ((uint32_t)0x000F0000) /*!< Data hold time */
+#define I2C_TIMINGR_SCLDEL ((uint32_t)0x00F00000) /*!< Data setup time */
+#define I2C_TIMINGR_PRESC ((uint32_t)0xF0000000) /*!< Timings prescaler */
+
+/******************* Bit definition for I2C_TIMEOUTR register ****************/
+#define I2C_TIMEOUTR_TIMEOUTA ((uint32_t)0x00000FFF) /*!< Bus timeout A */
+#define I2C_TIMEOUTR_TIDLE ((uint32_t)0x00001000) /*!< Idle clock timeout detection */
+#define I2C_TIMEOUTR_TIMOUTEN ((uint32_t)0x00008000) /*!< Clock timeout enable */
+#define I2C_TIMEOUTR_TIMEOUTB ((uint32_t)0x0FFF0000) /*!< Bus timeout B*/
+#define I2C_TIMEOUTR_TEXTEN ((uint32_t)0x80000000) /*!< Extended clock timeout enable */
+
+/****************** Bit definition for I2C_ISR register ********************/
+#define I2C_ISR_TXE ((uint32_t)0x00000001) /*!< Transmit data register empty */
+#define I2C_ISR_TXIS ((uint32_t)0x00000002) /*!< Transmit interrupt status */
+#define I2C_ISR_RXNE ((uint32_t)0x00000004) /*!< Receive data register not empty */
+#define I2C_ISR_ADDR ((uint32_t)0x00000008) /*!< Address matched (slave mode)*/
+#define I2C_ISR_NACKF ((uint32_t)0x00000010) /*!< NACK received flag */
+#define I2C_ISR_STOPF ((uint32_t)0x00000020) /*!< STOP detection flag */
+#define I2C_ISR_TC ((uint32_t)0x00000040) /*!< Transfer complete (master mode) */
+#define I2C_ISR_TCR ((uint32_t)0x00000080) /*!< Transfer complete reload */
+#define I2C_ISR_BERR ((uint32_t)0x00000100) /*!< Bus error */
+#define I2C_ISR_ARLO ((uint32_t)0x00000200) /*!< Arbitration lost */
+#define I2C_ISR_OVR ((uint32_t)0x00000400) /*!< Overrun/Underrun */
+#define I2C_ISR_PECERR ((uint32_t)0x00000800) /*!< PEC error in reception */
+#define I2C_ISR_TIMEOUT ((uint32_t)0x00001000) /*!< Timeout or Tlow detection flag */
+#define I2C_ISR_ALERT ((uint32_t)0x00002000) /*!< SMBus alert */
+#define I2C_ISR_BUSY ((uint32_t)0x00008000) /*!< Bus busy */
+#define I2C_ISR_DIR ((uint32_t)0x00010000) /*!< Transfer direction (slave mode) */
+#define I2C_ISR_ADDCODE ((uint32_t)0x00FE0000) /*!< Address match code (slave mode) */
+
+/****************** Bit definition for I2C_ICR register ********************/
+#define I2C_ICR_ADDRCF ((uint32_t)0x00000008) /*!< Address matched clear flag */
+#define I2C_ICR_NACKCF ((uint32_t)0x00000010) /*!< NACK clear flag */
+#define I2C_ICR_STOPCF ((uint32_t)0x00000020) /*!< STOP detection clear flag */
+#define I2C_ICR_BERRCF ((uint32_t)0x00000100) /*!< Bus error clear flag */
+#define I2C_ICR_ARLOCF ((uint32_t)0x00000200) /*!< Arbitration lost clear flag */
+#define I2C_ICR_OVRCF ((uint32_t)0x00000400) /*!< Overrun/Underrun clear flag */
+#define I2C_ICR_PECCF ((uint32_t)0x00000800) /*!< PAC error clear flag */
+#define I2C_ICR_TIMOUTCF ((uint32_t)0x00001000) /*!< Timeout clear flag */
+#define I2C_ICR_ALERTCF ((uint32_t)0x00002000) /*!< Alert clear flag */
+
+/****************** Bit definition for I2C_PECR register *******************/
+#define I2C_PECR_PEC ((uint32_t)0x000000FF) /*!< PEC register */
+
+/****************** Bit definition for I2C_RXDR register *********************/
+#define I2C_RXDR_RXDATA ((uint32_t)0x000000FF) /*!< 8-bit receive data */
+
+/****************** Bit definition for I2C_TXDR register *******************/
+#define I2C_TXDR_TXDATA ((uint32_t)0x000000FF) /*!< 8-bit transmit data */
+
+/*****************************************************************************/
+/* */
+/* Independent WATCHDOG (IWDG) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for IWDG_KR register *******************/
+#define IWDG_KR_KEY ((uint32_t)0xFFFF) /*!< Key value (write only, read 0000h) */
+
+/******************* Bit definition for IWDG_PR register *******************/
+#define IWDG_PR_PR ((uint32_t)0x07) /*!< PR[2:0] (Prescaler divider) */
+#define IWDG_PR_PR_0 ((uint32_t)0x01) /*!< Bit 0 */
+#define IWDG_PR_PR_1 ((uint32_t)0x02) /*!< Bit 1 */
+#define IWDG_PR_PR_2 ((uint32_t)0x04) /*!< Bit 2 */
+
+/******************* Bit definition for IWDG_RLR register ******************/
+#define IWDG_RLR_RL ((uint32_t)0x0FFF) /*!< Watchdog counter reload value */
+
+/******************* Bit definition for IWDG_SR register *******************/
+#define IWDG_SR_PVU ((uint32_t)0x01) /*!< Watchdog prescaler value update */
+#define IWDG_SR_RVU ((uint32_t)0x02) /*!< Watchdog counter reload value update */
+#define IWDG_SR_WVU ((uint32_t)0x04) /*!< Watchdog counter window value update */
+
+/******************* Bit definition for IWDG_KR register *******************/
+#define IWDG_WINR_WIN ((uint32_t)0x0FFF) /*!< Watchdog counter window value */
+
+/*****************************************************************************/
+/* */
+/* Power Control (PWR) */
+/* */
+/*****************************************************************************/
+
+/******************** Bit definition for PWR_CR register *******************/
+#define PWR_CR_LPDS ((uint32_t)0x00000001) /*!< Low-power Deepsleep */
+#define PWR_CR_PDDS ((uint32_t)0x00000002) /*!< Power Down Deepsleep */
+#define PWR_CR_CWUF ((uint32_t)0x00000004) /*!< Clear Wakeup Flag */
+#define PWR_CR_CSBF ((uint32_t)0x00000008) /*!< Clear Standby Flag */
+#define PWR_CR_DBP ((uint32_t)0x00000100) /*!< Disable Backup Domain write protection */
+
+/******************* Bit definition for PWR_CSR register *******************/
+#define PWR_CSR_WUF ((uint32_t)0x00000001) /*!< Wakeup Flag */
+#define PWR_CSR_SBF ((uint32_t)0x00000002) /*!< Standby Flag */
+#define PWR_CSR_VREFINTRDYF ((uint32_t)0x00000008) /*!< Internal voltage reference (VREFINT) ready flag */
+
+#define PWR_CSR_EWUP1 ((uint32_t)0x00000100) /*!< Enable WKUP pin 1 */
+#define PWR_CSR_EWUP2 ((uint32_t)0x00000200) /*!< Enable WKUP pin 2 */
+#define PWR_CSR_EWUP3 ((uint32_t)0x00000400) /*!< Enable WKUP pin 3 */
+#define PWR_CSR_EWUP4 ((uint32_t)0x00000800) /*!< Enable WKUP pin 4 */
+#define PWR_CSR_EWUP5 ((uint32_t)0x00001000) /*!< Enable WKUP pin 5 */
+#define PWR_CSR_EWUP6 ((uint32_t)0x00002000) /*!< Enable WKUP pin 6 */
+#define PWR_CSR_EWUP7 ((uint32_t)0x00004000) /*!< Enable WKUP pin 7 */
+#define PWR_CSR_EWUP8 ((uint32_t)0x00008000) /*!< Enable WKUP pin 8 */
+
+/*****************************************************************************/
+/* */
+/* Reset and Clock Control */
+/* */
+/*****************************************************************************/
+
+/******************** Bit definition for RCC_CR register *******************/
+#define RCC_CR_HSION ((uint32_t)0x00000001) /*!< Internal High Speed clock enable */
+#define RCC_CR_HSIRDY ((uint32_t)0x00000002) /*!< Internal High Speed clock ready flag */
+
+#define RCC_CR_HSITRIM ((uint32_t)0x000000F8) /*!< Internal High Speed clock trimming */
+#define RCC_CR_HSITRIM_0 ((uint32_t)0x00000008) /*!<Bit 0 */
+#define RCC_CR_HSITRIM_1 ((uint32_t)0x00000010) /*!<Bit 1 */
+#define RCC_CR_HSITRIM_2 ((uint32_t)0x00000020) /*!<Bit 2 */
+#define RCC_CR_HSITRIM_3 ((uint32_t)0x00000040) /*!<Bit 3 */
+#define RCC_CR_HSITRIM_4 ((uint32_t)0x00000080) /*!<Bit 4 */
+
+#define RCC_CR_HSICAL ((uint32_t)0x0000FF00) /*!< Internal High Speed clock Calibration */
+#define RCC_CR_HSICAL_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define RCC_CR_HSICAL_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define RCC_CR_HSICAL_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define RCC_CR_HSICAL_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define RCC_CR_HSICAL_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+#define RCC_CR_HSICAL_5 ((uint32_t)0x00002000) /*!<Bit 5 */
+#define RCC_CR_HSICAL_6 ((uint32_t)0x00004000) /*!<Bit 6 */
+#define RCC_CR_HSICAL_7 ((uint32_t)0x00008000) /*!<Bit 7 */
+
+#define RCC_CR_HSEON ((uint32_t)0x00010000) /*!< External High Speed clock enable */
+#define RCC_CR_HSERDY ((uint32_t)0x00020000) /*!< External High Speed clock ready flag */
+#define RCC_CR_HSEBYP ((uint32_t)0x00040000) /*!< External High Speed clock Bypass */
+#define RCC_CR_CSSON ((uint32_t)0x00080000) /*!< Clock Security System enable */
+#define RCC_CR_PLLON ((uint32_t)0x01000000) /*!< PLL enable */
+#define RCC_CR_PLLRDY ((uint32_t)0x02000000) /*!< PLL clock ready flag */
+
+/******************** Bit definition for RCC_CFGR register *****************/
+/*!< SW configuration */
+#define RCC_CFGR_SW ((uint32_t)0x00000003) /*!< SW[1:0] bits (System clock Switch) */
+#define RCC_CFGR_SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR_SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+#define RCC_CFGR_SW_HSI ((uint32_t)0x00000000) /*!< HSI selected as system clock */
+#define RCC_CFGR_SW_HSE ((uint32_t)0x00000001) /*!< HSE selected as system clock */
+#define RCC_CFGR_SW_PLL ((uint32_t)0x00000002) /*!< PLL selected as system clock */
+#define RCC_CFGR_SW_HSI48 ((uint32_t)0x00000003) /*!< HSI48 selected as system clock */
+
+/*!< SWS configuration */
+#define RCC_CFGR_SWS ((uint32_t)0x0000000C) /*!< SWS[1:0] bits (System Clock Switch Status) */
+#define RCC_CFGR_SWS_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define RCC_CFGR_SWS_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+
+#define RCC_CFGR_SWS_HSI ((uint32_t)0x00000000) /*!< HSI oscillator used as system clock */
+#define RCC_CFGR_SWS_HSE ((uint32_t)0x00000004) /*!< HSE oscillator used as system clock */
+#define RCC_CFGR_SWS_PLL ((uint32_t)0x00000008) /*!< PLL used as system clock */
+#define RCC_CFGR_SWS_HSI48 ((uint32_t)0x0000000C) /*!< HSI48 oscillator used as system clock */
+
+/*!< HPRE configuration */
+#define RCC_CFGR_HPRE ((uint32_t)0x000000F0) /*!< HPRE[3:0] bits (AHB prescaler) */
+#define RCC_CFGR_HPRE_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define RCC_CFGR_HPRE_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define RCC_CFGR_HPRE_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+#define RCC_CFGR_HPRE_3 ((uint32_t)0x00000080) /*!< Bit 3 */
+
+#define RCC_CFGR_HPRE_DIV1 ((uint32_t)0x00000000) /*!< SYSCLK not divided */
+#define RCC_CFGR_HPRE_DIV2 ((uint32_t)0x00000080) /*!< SYSCLK divided by 2 */
+#define RCC_CFGR_HPRE_DIV4 ((uint32_t)0x00000090) /*!< SYSCLK divided by 4 */
+#define RCC_CFGR_HPRE_DIV8 ((uint32_t)0x000000A0) /*!< SYSCLK divided by 8 */
+#define RCC_CFGR_HPRE_DIV16 ((uint32_t)0x000000B0) /*!< SYSCLK divided by 16 */
+#define RCC_CFGR_HPRE_DIV64 ((uint32_t)0x000000C0) /*!< SYSCLK divided by 64 */
+#define RCC_CFGR_HPRE_DIV128 ((uint32_t)0x000000D0) /*!< SYSCLK divided by 128 */
+#define RCC_CFGR_HPRE_DIV256 ((uint32_t)0x000000E0) /*!< SYSCLK divided by 256 */
+#define RCC_CFGR_HPRE_DIV512 ((uint32_t)0x000000F0) /*!< SYSCLK divided by 512 */
+
+/*!< PPRE configuration */
+#define RCC_CFGR_PPRE ((uint32_t)0x00000700) /*!< PRE[2:0] bits (APB prescaler) */
+#define RCC_CFGR_PPRE_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define RCC_CFGR_PPRE_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define RCC_CFGR_PPRE_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+
+#define RCC_CFGR_PPRE_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */
+#define RCC_CFGR_PPRE_DIV2 ((uint32_t)0x00000400) /*!< HCLK divided by 2 */
+#define RCC_CFGR_PPRE_DIV4 ((uint32_t)0x00000500) /*!< HCLK divided by 4 */
+#define RCC_CFGR_PPRE_DIV8 ((uint32_t)0x00000600) /*!< HCLK divided by 8 */
+#define RCC_CFGR_PPRE_DIV16 ((uint32_t)0x00000700) /*!< HCLK divided by 16 */
+
+/*!< ADCPPRE configuration */
+#define RCC_CFGR_ADCPRE ((uint32_t)0x00004000) /*!< ADCPRE bit (ADC prescaler) */
+
+#define RCC_CFGR_ADCPRE_DIV2 ((uint32_t)0x00000000) /*!< PCLK divided by 2 */
+#define RCC_CFGR_ADCPRE_DIV4 ((uint32_t)0x00004000) /*!< PCLK divided by 4 */
+
+#define RCC_CFGR_PLLSRC ((uint32_t)0x00018000) /*!< PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSI_DIV2 ((uint32_t)0x00000000) /*!< HSI clock divided by 2 selected as PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSI_PREDIV ((uint32_t)0x00008000) /*!< HSI/PREDIV clock selected as PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSE_PREDIV ((uint32_t)0x00010000) /*!< HSE/PREDIV clock selected as PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSI48_PREDIV ((uint32_t)0x00018000) /*!< HSI48/PREDIV clock selected as PLL entry clock source */
+
+#define RCC_CFGR_PLLXTPRE ((uint32_t)0x00020000) /*!< HSE divider for PLL entry */
+#define RCC_CFGR_PLLXTPRE_HSE_PREDIV_DIV1 ((uint32_t)0x00000000) /*!< HSE/PREDIV clock not divided for PLL entry */
+#define RCC_CFGR_PLLXTPRE_HSE_PREDIV_DIV2 ((uint32_t)0x00020000) /*!< HSE/PREDIV clock divided by 2 for PLL entry */
+
+/*!< PLLMUL configuration */
+#define RCC_CFGR_PLLMUL ((uint32_t)0x003C0000) /*!< PLLMUL[3:0] bits (PLL multiplication factor) */
+#define RCC_CFGR_PLLMUL_0 ((uint32_t)0x00040000) /*!< Bit 0 */
+#define RCC_CFGR_PLLMUL_1 ((uint32_t)0x00080000) /*!< Bit 1 */
+#define RCC_CFGR_PLLMUL_2 ((uint32_t)0x00100000) /*!< Bit 2 */
+#define RCC_CFGR_PLLMUL_3 ((uint32_t)0x00200000) /*!< Bit 3 */
+
+#define RCC_CFGR_PLLMUL2 ((uint32_t)0x00000000) /*!< PLL input clock*2 */
+#define RCC_CFGR_PLLMUL3 ((uint32_t)0x00040000) /*!< PLL input clock*3 */
+#define RCC_CFGR_PLLMUL4 ((uint32_t)0x00080000) /*!< PLL input clock*4 */
+#define RCC_CFGR_PLLMUL5 ((uint32_t)0x000C0000) /*!< PLL input clock*5 */
+#define RCC_CFGR_PLLMUL6 ((uint32_t)0x00100000) /*!< PLL input clock*6 */
+#define RCC_CFGR_PLLMUL7 ((uint32_t)0x00140000) /*!< PLL input clock*7 */
+#define RCC_CFGR_PLLMUL8 ((uint32_t)0x00180000) /*!< PLL input clock*8 */
+#define RCC_CFGR_PLLMUL9 ((uint32_t)0x001C0000) /*!< PLL input clock*9 */
+#define RCC_CFGR_PLLMUL10 ((uint32_t)0x00200000) /*!< PLL input clock10 */
+#define RCC_CFGR_PLLMUL11 ((uint32_t)0x00240000) /*!< PLL input clock*11 */
+#define RCC_CFGR_PLLMUL12 ((uint32_t)0x00280000) /*!< PLL input clock*12 */
+#define RCC_CFGR_PLLMUL13 ((uint32_t)0x002C0000) /*!< PLL input clock*13 */
+#define RCC_CFGR_PLLMUL14 ((uint32_t)0x00300000) /*!< PLL input clock*14 */
+#define RCC_CFGR_PLLMUL15 ((uint32_t)0x00340000) /*!< PLL input clock*15 */
+#define RCC_CFGR_PLLMUL16 ((uint32_t)0x00380000) /*!< PLL input clock*16 */
+
+/*!< USB configuration */
+#define RCC_CFGR_USBPRE ((uint32_t)0x00400000) /*!< USB prescaler */
+
+/*!< MCO configuration */
+#define RCC_CFGR_MCO ((uint32_t)0x0F000000) /*!< MCO[3:0] bits (Microcontroller Clock Output) */
+#define RCC_CFGR_MCO_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define RCC_CFGR_MCO_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define RCC_CFGR_MCO_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+#define RCC_CFGR_MCO_3 ((uint32_t)0x08000000) /*!< Bit 3 */
+
+#define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
+#define RCC_CFGR_MCO_HSI14 ((uint32_t)0x01000000) /*!< HSI14 clock selected as MCO source */
+#define RCC_CFGR_MCO_LSI ((uint32_t)0x02000000) /*!< LSI clock selected as MCO source */
+#define RCC_CFGR_MCO_LSE ((uint32_t)0x03000000) /*!< LSE clock selected as MCO source */
+#define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x04000000) /*!< System clock selected as MCO source */
+#define RCC_CFGR_MCO_HSI ((uint32_t)0x05000000) /*!< HSI clock selected as MCO source */
+#define RCC_CFGR_MCO_HSE ((uint32_t)0x06000000) /*!< HSE clock selected as MCO source */
+#define RCC_CFGR_MCO_PLL ((uint32_t)0x07000000) /*!< PLL clock divided by 2 selected as MCO source */
+#define RCC_CFGR_MCO_HSI48 ((uint32_t)0x08000000) /*!< HSI48 clock selected as MCO source */
+
+#define RCC_CFGR_MCOPRE ((uint32_t)0x70000000) /*!< MCO prescaler */
+#define RCC_CFGR_MCOPRE_DIV1 ((uint32_t)0x00000000) /*!< MCO is divided by 1 */
+#define RCC_CFGR_MCOPRE_DIV2 ((uint32_t)0x10000000) /*!< MCO is divided by 2 */
+#define RCC_CFGR_MCOPRE_DIV4 ((uint32_t)0x20000000) /*!< MCO is divided by 4 */
+#define RCC_CFGR_MCOPRE_DIV8 ((uint32_t)0x30000000) /*!< MCO is divided by 8 */
+#define RCC_CFGR_MCOPRE_DIV16 ((uint32_t)0x40000000) /*!< MCO is divided by 16 */
+#define RCC_CFGR_MCOPRE_DIV32 ((uint32_t)0x50000000) /*!< MCO is divided by 32 */
+#define RCC_CFGR_MCOPRE_DIV64 ((uint32_t)0x60000000) /*!< MCO is divided by 64 */
+#define RCC_CFGR_MCOPRE_DIV128 ((uint32_t)0x70000000) /*!< MCO is divided by 128 */
+
+#define RCC_CFGR_PLLNODIV ((uint32_t)0x80000000) /*!< PLL is not divided to MCO */
+
+/*!<****************** Bit definition for RCC_CIR register *****************/
+#define RCC_CIR_LSIRDYF ((uint32_t)0x00000001) /*!< LSI Ready Interrupt flag */
+#define RCC_CIR_LSERDYF ((uint32_t)0x00000002) /*!< LSE Ready Interrupt flag */
+#define RCC_CIR_HSIRDYF ((uint32_t)0x00000004) /*!< HSI Ready Interrupt flag */
+#define RCC_CIR_HSERDYF ((uint32_t)0x00000008) /*!< HSE Ready Interrupt flag */
+#define RCC_CIR_PLLRDYF ((uint32_t)0x00000010) /*!< PLL Ready Interrupt flag */
+#define RCC_CIR_HSI14RDYF ((uint32_t)0x00000020) /*!< HSI14 Ready Interrupt flag */
+#define RCC_CIR_HSI48RDYF ((uint32_t)0x00000040) /*!< HSI48 Ready Interrupt flag */
+#define RCC_CIR_CSSF ((uint32_t)0x00000080) /*!< Clock Security System Interrupt flag */
+#define RCC_CIR_LSIRDYIE ((uint32_t)0x00000100) /*!< LSI Ready Interrupt Enable */
+#define RCC_CIR_LSERDYIE ((uint32_t)0x00000200) /*!< LSE Ready Interrupt Enable */
+#define RCC_CIR_HSIRDYIE ((uint32_t)0x00000400) /*!< HSI Ready Interrupt Enable */
+#define RCC_CIR_HSERDYIE ((uint32_t)0x00000800) /*!< HSE Ready Interrupt Enable */
+#define RCC_CIR_PLLRDYIE ((uint32_t)0x00001000) /*!< PLL Ready Interrupt Enable */
+#define RCC_CIR_HSI14RDYIE ((uint32_t)0x00002000) /*!< HSI14 Ready Interrupt Enable */
+#define RCC_CIR_HSI48RDYIE ((uint32_t)0x00004000) /*!< HSI48 Ready Interrupt Enable */
+#define RCC_CIR_LSIRDYC ((uint32_t)0x00010000) /*!< LSI Ready Interrupt Clear */
+#define RCC_CIR_LSERDYC ((uint32_t)0x00020000) /*!< LSE Ready Interrupt Clear */
+#define RCC_CIR_HSIRDYC ((uint32_t)0x00040000) /*!< HSI Ready Interrupt Clear */
+#define RCC_CIR_HSERDYC ((uint32_t)0x00080000) /*!< HSE Ready Interrupt Clear */
+#define RCC_CIR_PLLRDYC ((uint32_t)0x00100000) /*!< PLL Ready Interrupt Clear */
+#define RCC_CIR_HSI14RDYC ((uint32_t)0x00200000) /*!< HSI14 Ready Interrupt Clear */
+#define RCC_CIR_HSI48RDYC ((uint32_t)0x00400000) /*!< HSI48 Ready Interrupt Clear */
+#define RCC_CIR_CSSC ((uint32_t)0x00800000) /*!< Clock Security System Interrupt Clear */
+
+/***************** Bit definition for RCC_APB2RSTR register ****************/
+#define RCC_APB2RSTR_SYSCFGRST ((uint32_t)0x00000001) /*!< SYSCFG clock reset */
+#define RCC_APB2RSTR_ADCRST ((uint32_t)0x00000200) /*!< ADC clock reset */
+#define RCC_APB2RSTR_TIM1RST ((uint32_t)0x00000800) /*!< TIM1 clock reset */
+#define RCC_APB2RSTR_SPI1RST ((uint32_t)0x00001000) /*!< SPI1 clock reset */
+#define RCC_APB2RSTR_USART1RST ((uint32_t)0x00004000) /*!< USART1 clock reset */
+#define RCC_APB2RSTR_TIM15RST ((uint32_t)0x00010000) /*!< TIM15 clock reset */
+#define RCC_APB2RSTR_TIM16RST ((uint32_t)0x00020000) /*!< TIM16 clock reset */
+#define RCC_APB2RSTR_TIM17RST ((uint32_t)0x00040000) /*!< TIM17 clock reset */
+#define RCC_APB2RSTR_DBGMCURST ((uint32_t)0x00400000) /*!< DBGMCU clock reset */
+
+/*!< Old ADC1 clock reset bit definition maintained for legacy purpose */
+#define RCC_APB2RSTR_ADC1RST RCC_APB2RSTR_ADCRST
+
+/***************** Bit definition for RCC_APB1RSTR register ****************/
+#define RCC_APB1RSTR_TIM2RST ((uint32_t)0x00000001) /*!< Timer 2 clock reset */
+#define RCC_APB1RSTR_TIM3RST ((uint32_t)0x00000002) /*!< Timer 3 clock reset */
+#define RCC_APB1RSTR_TIM6RST ((uint32_t)0x00000010) /*!< Timer 6 clock reset */
+#define RCC_APB1RSTR_TIM7RST ((uint32_t)0x00000020) /*!< Timer 7 clock reset */
+#define RCC_APB1RSTR_TIM14RST ((uint32_t)0x00000100) /*!< Timer 14 clock reset */
+#define RCC_APB1RSTR_WWDGRST ((uint32_t)0x00000800) /*!< Window Watchdog clock reset */
+#define RCC_APB1RSTR_SPI2RST ((uint32_t)0x00004000) /*!< SPI2 clock reset */
+#define RCC_APB1RSTR_USART2RST ((uint32_t)0x00020000) /*!< USART 2 clock reset */
+#define RCC_APB1RSTR_USART3RST ((uint32_t)0x00040000) /*!< USART 3 clock reset */
+#define RCC_APB1RSTR_USART4RST ((uint32_t)0x00080000) /*!< USART 4 clock reset */
+#define RCC_APB1RSTR_I2C1RST ((uint32_t)0x00200000) /*!< I2C 1 clock reset */
+#define RCC_APB1RSTR_I2C2RST ((uint32_t)0x00400000) /*!< I2C 2 clock reset */
+#define RCC_APB1RSTR_USBRST ((uint32_t)0x00800000) /*!< USB clock reset */
+#define RCC_APB1RSTR_CANRST ((uint32_t)0x02000000) /*!< CAN clock reset */
+#define RCC_APB1RSTR_CRSRST ((uint32_t)0x08000000) /*!< CRS clock reset */
+#define RCC_APB1RSTR_PWRRST ((uint32_t)0x10000000) /*!< PWR clock reset */
+#define RCC_APB1RSTR_DACRST ((uint32_t)0x20000000) /*!< DAC clock reset */
+#define RCC_APB1RSTR_CECRST ((uint32_t)0x40000000) /*!< CEC clock reset */
+
+/****************** Bit definition for RCC_AHBENR register *****************/
+#define RCC_AHBENR_DMAEN ((uint32_t)0x00000001) /*!< DMA1 clock enable */
+#define RCC_AHBENR_SRAMEN ((uint32_t)0x00000004) /*!< SRAM interface clock enable */
+#define RCC_AHBENR_FLITFEN ((uint32_t)0x00000010) /*!< FLITF clock enable */
+#define RCC_AHBENR_CRCEN ((uint32_t)0x00000040) /*!< CRC clock enable */
+#define RCC_AHBENR_GPIOAEN ((uint32_t)0x00020000) /*!< GPIOA clock enable */
+#define RCC_AHBENR_GPIOBEN ((uint32_t)0x00040000) /*!< GPIOB clock enable */
+#define RCC_AHBENR_GPIOCEN ((uint32_t)0x00080000) /*!< GPIOC clock enable */
+#define RCC_AHBENR_GPIODEN ((uint32_t)0x00100000) /*!< GPIOD clock enable */
+#define RCC_AHBENR_GPIOEEN ((uint32_t)0x00200000) /*!< GPIOE clock enable */
+#define RCC_AHBENR_GPIOFEN ((uint32_t)0x00400000) /*!< GPIOF clock enable */
+#define RCC_AHBENR_TSCEN ((uint32_t)0x01000000) /*!< TS controller clock enable */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_AHBENR_DMA1EN RCC_AHBENR_DMAEN /*!< DMA1 clock enable */
+#define RCC_AHBENR_TSEN RCC_AHBENR_TSCEN /*!< TS clock enable */
+
+/***************** Bit definition for RCC_APB2ENR register *****************/
+#define RCC_APB2ENR_SYSCFGCOMPEN ((uint32_t)0x00000001) /*!< SYSCFG and comparator clock enable */
+#define RCC_APB2ENR_ADCEN ((uint32_t)0x00000200) /*!< ADC1 clock enable */
+#define RCC_APB2ENR_TIM1EN ((uint32_t)0x00000800) /*!< TIM1 clock enable */
+#define RCC_APB2ENR_SPI1EN ((uint32_t)0x00001000) /*!< SPI1 clock enable */
+#define RCC_APB2ENR_USART1EN ((uint32_t)0x00004000) /*!< USART1 clock enable */
+#define RCC_APB2ENR_TIM15EN ((uint32_t)0x00010000) /*!< TIM15 clock enable */
+#define RCC_APB2ENR_TIM16EN ((uint32_t)0x00020000) /*!< TIM16 clock enable */
+#define RCC_APB2ENR_TIM17EN ((uint32_t)0x00040000) /*!< TIM17 clock enable */
+#define RCC_APB2ENR_DBGMCUEN ((uint32_t)0x00400000) /*!< DBGMCU clock enable */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_APB2ENR_SYSCFGEN RCC_APB2ENR_SYSCFGCOMPEN /*!< SYSCFG clock enable */
+#define RCC_APB2ENR_ADC1EN RCC_APB2ENR_ADCEN /*!< ADC1 clock enable */
+
+/***************** Bit definition for RCC_APB1ENR register *****************/
+#define RCC_APB1ENR_TIM2EN ((uint32_t)0x00000001) /*!< Timer 2 clock enable */
+#define RCC_APB1ENR_TIM3EN ((uint32_t)0x00000002) /*!< Timer 3 clock enable */
+#define RCC_APB1ENR_TIM6EN ((uint32_t)0x00000010) /*!< Timer 6 clock enable */
+#define RCC_APB1ENR_TIM7EN ((uint32_t)0x00000020) /*!< Timer 7 clock enable */
+#define RCC_APB1ENR_TIM14EN ((uint32_t)0x00000100) /*!< Timer 14 clock enable */
+#define RCC_APB1ENR_WWDGEN ((uint32_t)0x00000800) /*!< Window Watchdog clock enable */
+#define RCC_APB1ENR_SPI2EN ((uint32_t)0x00004000) /*!< SPI2 clock enable */
+#define RCC_APB1ENR_USART2EN ((uint32_t)0x00020000) /*!< USART2 clock enable */
+#define RCC_APB1ENR_USART3EN ((uint32_t)0x00040000) /*!< USART3 clock enable */
+#define RCC_APB1ENR_USART4EN ((uint32_t)0x00080000) /*!< USART4 clock enable */
+#define RCC_APB1ENR_I2C1EN ((uint32_t)0x00200000) /*!< I2C1 clock enable */
+#define RCC_APB1ENR_I2C2EN ((uint32_t)0x00400000) /*!< I2C2 clock enable */
+#define RCC_APB1ENR_USBEN ((uint32_t)0x00800000) /*!< USB clock enable */
+#define RCC_APB1ENR_CANEN ((uint32_t)0x02000000) /*!< CAN clock enable */
+#define RCC_APB1ENR_CRSEN ((uint32_t)0x08000000) /*!< CRS clock enable */
+#define RCC_APB1ENR_PWREN ((uint32_t)0x10000000) /*!< PWR clock enable */
+#define RCC_APB1ENR_DACEN ((uint32_t)0x20000000) /*!< DAC clock enable */
+#define RCC_APB1ENR_CECEN ((uint32_t)0x40000000) /*!< CEC clock enable */
+
+/******************* Bit definition for RCC_BDCR register ******************/
+#define RCC_BDCR_LSEON ((uint32_t)0x00000001) /*!< External Low Speed oscillator enable */
+#define RCC_BDCR_LSERDY ((uint32_t)0x00000002) /*!< External Low Speed oscillator Ready */
+#define RCC_BDCR_LSEBYP ((uint32_t)0x00000004) /*!< External Low Speed oscillator Bypass */
+
+#define RCC_BDCR_LSEDRV ((uint32_t)0x00000018) /*!< LSEDRV[1:0] bits (LSE Osc. drive capability) */
+#define RCC_BDCR_LSEDRV_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define RCC_BDCR_LSEDRV_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+
+#define RCC_BDCR_RTCSEL ((uint32_t)0x00000300) /*!< RTCSEL[1:0] bits (RTC clock source selection) */
+#define RCC_BDCR_RTCSEL_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define RCC_BDCR_RTCSEL_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+
+/*!< RTC configuration */
+#define RCC_BDCR_RTCSEL_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
+#define RCC_BDCR_RTCSEL_LSE ((uint32_t)0x00000100) /*!< LSE oscillator clock used as RTC clock */
+#define RCC_BDCR_RTCSEL_LSI ((uint32_t)0x00000200) /*!< LSI oscillator clock used as RTC clock */
+#define RCC_BDCR_RTCSEL_HSE ((uint32_t)0x00000300) /*!< HSE oscillator clock divided by 128 used as RTC clock */
+
+#define RCC_BDCR_RTCEN ((uint32_t)0x00008000) /*!< RTC clock enable */
+#define RCC_BDCR_BDRST ((uint32_t)0x00010000) /*!< Backup domain software reset */
+
+/******************* Bit definition for RCC_CSR register *******************/
+#define RCC_CSR_LSION ((uint32_t)0x00000001) /*!< Internal Low Speed oscillator enable */
+#define RCC_CSR_LSIRDY ((uint32_t)0x00000002) /*!< Internal Low Speed oscillator Ready */
+#define RCC_CSR_V18PWRRSTF ((uint32_t)0x00800000) /*!< V1.8 power domain reset flag */
+#define RCC_CSR_RMVF ((uint32_t)0x01000000) /*!< Remove reset flag */
+#define RCC_CSR_OBLRSTF ((uint32_t)0x02000000) /*!< OBL reset flag */
+#define RCC_CSR_PINRSTF ((uint32_t)0x04000000) /*!< PIN reset flag */
+#define RCC_CSR_PORRSTF ((uint32_t)0x08000000) /*!< POR/PDR reset flag */
+#define RCC_CSR_SFTRSTF ((uint32_t)0x10000000) /*!< Software Reset flag */
+#define RCC_CSR_IWDGRSTF ((uint32_t)0x20000000) /*!< Independent Watchdog reset flag */
+#define RCC_CSR_WWDGRSTF ((uint32_t)0x40000000) /*!< Window watchdog reset flag */
+#define RCC_CSR_LPWRRSTF ((uint32_t)0x80000000) /*!< Low-Power reset flag */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_CSR_OBL RCC_CSR_OBLRSTF /*!< OBL reset flag */
+
+/******************* Bit definition for RCC_AHBRSTR register ***************/
+#define RCC_AHBRSTR_GPIOARST ((uint32_t)0x00020000) /*!< GPIOA clock reset */
+#define RCC_AHBRSTR_GPIOBRST ((uint32_t)0x00040000) /*!< GPIOB clock reset */
+#define RCC_AHBRSTR_GPIOCRST ((uint32_t)0x00080000) /*!< GPIOC clock reset */
+#define RCC_AHBRSTR_GPIODRST ((uint32_t)0x00100000) /*!< GPIOD clock reset */
+#define RCC_AHBRSTR_GPIOERST ((uint32_t)0x00200000) /*!< GPIOE clock reset */
+#define RCC_AHBRSTR_GPIOFRST ((uint32_t)0x00400000) /*!< GPIOF clock reset */
+#define RCC_AHBRSTR_TSCRST ((uint32_t)0x01000000) /*!< TS clock reset */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_AHBRSTR_TSRST RCC_AHBRSTR_TSCRST /*!< TS clock reset */
+
+/******************* Bit definition for RCC_CFGR2 register *****************/
+/*!< PREDIV configuration */
+#define RCC_CFGR2_PREDIV ((uint32_t)0x0000000F) /*!< PREDIV[3:0] bits */
+#define RCC_CFGR2_PREDIV_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR2_PREDIV_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define RCC_CFGR2_PREDIV_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define RCC_CFGR2_PREDIV_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+
+#define RCC_CFGR2_PREDIV_DIV1 ((uint32_t)0x00000000) /*!< PREDIV input clock not divided */
+#define RCC_CFGR2_PREDIV_DIV2 ((uint32_t)0x00000001) /*!< PREDIV input clock divided by 2 */
+#define RCC_CFGR2_PREDIV_DIV3 ((uint32_t)0x00000002) /*!< PREDIV input clock divided by 3 */
+#define RCC_CFGR2_PREDIV_DIV4 ((uint32_t)0x00000003) /*!< PREDIV input clock divided by 4 */
+#define RCC_CFGR2_PREDIV_DIV5 ((uint32_t)0x00000004) /*!< PREDIV input clock divided by 5 */
+#define RCC_CFGR2_PREDIV_DIV6 ((uint32_t)0x00000005) /*!< PREDIV input clock divided by 6 */
+#define RCC_CFGR2_PREDIV_DIV7 ((uint32_t)0x00000006) /*!< PREDIV input clock divided by 7 */
+#define RCC_CFGR2_PREDIV_DIV8 ((uint32_t)0x00000007) /*!< PREDIV input clock divided by 8 */
+#define RCC_CFGR2_PREDIV_DIV9 ((uint32_t)0x00000008) /*!< PREDIV input clock divided by 9 */
+#define RCC_CFGR2_PREDIV_DIV10 ((uint32_t)0x00000009) /*!< PREDIV input clock divided by 10 */
+#define RCC_CFGR2_PREDIV_DIV11 ((uint32_t)0x0000000A) /*!< PREDIV input clock divided by 11 */
+#define RCC_CFGR2_PREDIV_DIV12 ((uint32_t)0x0000000B) /*!< PREDIV input clock divided by 12 */
+#define RCC_CFGR2_PREDIV_DIV13 ((uint32_t)0x0000000C) /*!< PREDIV input clock divided by 13 */
+#define RCC_CFGR2_PREDIV_DIV14 ((uint32_t)0x0000000D) /*!< PREDIV input clock divided by 14 */
+#define RCC_CFGR2_PREDIV_DIV15 ((uint32_t)0x0000000E) /*!< PREDIV input clock divided by 15 */
+#define RCC_CFGR2_PREDIV_DIV16 ((uint32_t)0x0000000F) /*!< PREDIV input clock divided by 16 */
+
+/******************* Bit definition for RCC_CFGR3 register *****************/
+/*!< USART1 Clock source selection */
+#define RCC_CFGR3_USART1SW ((uint32_t)0x00000003) /*!< USART1SW[1:0] bits */
+#define RCC_CFGR3_USART1SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR3_USART1SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+#define RCC_CFGR3_USART1SW_PCLK ((uint32_t)0x00000000) /*!< PCLK clock used as USART1 clock source */
+#define RCC_CFGR3_USART1SW_SYSCLK ((uint32_t)0x00000001) /*!< System clock selected as USART1 clock source */
+#define RCC_CFGR3_USART1SW_LSE ((uint32_t)0x00000002) /*!< LSE oscillator clock used as USART1 clock source */
+#define RCC_CFGR3_USART1SW_HSI ((uint32_t)0x00000003) /*!< HSI oscillator clock used as USART1 clock source */
+
+/*!< I2C1 Clock source selection */
+#define RCC_CFGR3_I2C1SW ((uint32_t)0x00000010) /*!< I2C1SW bits */
+
+#define RCC_CFGR3_I2C1SW_HSI ((uint32_t)0x00000000) /*!< HSI oscillator clock used as I2C1 clock source */
+#define RCC_CFGR3_I2C1SW_SYSCLK ((uint32_t)0x00000010) /*!< System clock selected as I2C1 clock source */
+
+/*!< CEC Clock source selection */
+#define RCC_CFGR3_CECSW ((uint32_t)0x00000040) /*!< CECSW bits */
+
+#define RCC_CFGR3_CECSW_HSI_DIV244 ((uint32_t)0x00000000) /*!< HSI clock divided by 244 selected as HDMI CEC entry clock source */
+#define RCC_CFGR3_CECSW_LSE ((uint32_t)0x00000040) /*!< LSE clock selected as HDMI CEC entry clock source */
+
+/*!< USB Clock source selection */
+#define RCC_CFGR3_USBSW ((uint32_t)0x00000080) /*!< USBSW bits */
+
+#define RCC_CFGR3_USBSW_HSI48 ((uint32_t)0x00000000) /*!< HSI48 oscillator clock used as USB clock source */
+#define RCC_CFGR3_USBSW_PLLCLK ((uint32_t)0x00000080) /*!< PLLCLK selected as USB clock source */
+
+/*!< USART2 Clock source selection */
+#define RCC_CFGR3_USART2SW ((uint32_t)0x00030000) /*!< USART2SW[1:0] bits */
+#define RCC_CFGR3_USART2SW_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define RCC_CFGR3_USART2SW_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+
+#define RCC_CFGR3_USART2SW_PCLK ((uint32_t)0x00000000) /*!< PCLK clock used as USART2 clock source */
+#define RCC_CFGR3_USART2SW_SYSCLK ((uint32_t)0x00010000) /*!< System clock selected as USART2 clock source */
+#define RCC_CFGR3_USART2SW_LSE ((uint32_t)0x00020000) /*!< LSE oscillator clock used as USART2 clock source */
+#define RCC_CFGR3_USART2SW_HSI ((uint32_t)0x00030000) /*!< HSI oscillator clock used as USART2 clock source */
+
+/******************* Bit definition for RCC_CR2 register *******************/
+#define RCC_CR2_HSI14ON ((uint32_t)0x00000001) /*!< Internal High Speed 14MHz clock enable */
+#define RCC_CR2_HSI14RDY ((uint32_t)0x00000002) /*!< Internal High Speed 14MHz clock ready flag */
+#define RCC_CR2_HSI14DIS ((uint32_t)0x00000004) /*!< Internal High Speed 14MHz clock disable */
+#define RCC_CR2_HSI14TRIM ((uint32_t)0x000000F8) /*!< Internal High Speed 14MHz clock trimming */
+#define RCC_CR2_HSI14CAL ((uint32_t)0x0000FF00) /*!< Internal High Speed 14MHz clock Calibration */
+#define RCC_CR2_HSI48ON ((uint32_t)0x00010000) /*!< Internal High Speed 48MHz clock enable */
+#define RCC_CR2_HSI48RDY ((uint32_t)0x00020000) /*!< Internal High Speed 48MHz clock ready flag */
+#define RCC_CR2_HSI48CAL ((uint32_t)0xFF000000) /*!< Internal High Speed 48MHz clock Calibration */
+
+/*****************************************************************************/
+/* */
+/* Real-Time Clock (RTC) */
+/* */
+/*****************************************************************************/
+/******************** Bits definition for RTC_TR register ******************/
+#define RTC_TR_PM ((uint32_t)0x00400000)
+#define RTC_TR_HT ((uint32_t)0x00300000)
+#define RTC_TR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TR_HU ((uint32_t)0x000F0000)
+#define RTC_TR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TR_MNT ((uint32_t)0x00007000)
+#define RTC_TR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TR_MNU ((uint32_t)0x00000F00)
+#define RTC_TR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TR_ST ((uint32_t)0x00000070)
+#define RTC_TR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TR_SU ((uint32_t)0x0000000F)
+#define RTC_TR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_DR register ******************/
+#define RTC_DR_YT ((uint32_t)0x00F00000)
+#define RTC_DR_YT_0 ((uint32_t)0x00100000)
+#define RTC_DR_YT_1 ((uint32_t)0x00200000)
+#define RTC_DR_YT_2 ((uint32_t)0x00400000)
+#define RTC_DR_YT_3 ((uint32_t)0x00800000)
+#define RTC_DR_YU ((uint32_t)0x000F0000)
+#define RTC_DR_YU_0 ((uint32_t)0x00010000)
+#define RTC_DR_YU_1 ((uint32_t)0x00020000)
+#define RTC_DR_YU_2 ((uint32_t)0x00040000)
+#define RTC_DR_YU_3 ((uint32_t)0x00080000)
+#define RTC_DR_WDU ((uint32_t)0x0000E000)
+#define RTC_DR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_DR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_DR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_DR_MT ((uint32_t)0x00001000)
+#define RTC_DR_MU ((uint32_t)0x00000F00)
+#define RTC_DR_MU_0 ((uint32_t)0x00000100)
+#define RTC_DR_MU_1 ((uint32_t)0x00000200)
+#define RTC_DR_MU_2 ((uint32_t)0x00000400)
+#define RTC_DR_MU_3 ((uint32_t)0x00000800)
+#define RTC_DR_DT ((uint32_t)0x00000030)
+#define RTC_DR_DT_0 ((uint32_t)0x00000010)
+#define RTC_DR_DT_1 ((uint32_t)0x00000020)
+#define RTC_DR_DU ((uint32_t)0x0000000F)
+#define RTC_DR_DU_0 ((uint32_t)0x00000001)
+#define RTC_DR_DU_1 ((uint32_t)0x00000002)
+#define RTC_DR_DU_2 ((uint32_t)0x00000004)
+#define RTC_DR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_CR register ******************/
+#define RTC_CR_COE ((uint32_t)0x00800000)
+#define RTC_CR_OSEL ((uint32_t)0x00600000)
+#define RTC_CR_OSEL_0 ((uint32_t)0x00200000)
+#define RTC_CR_OSEL_1 ((uint32_t)0x00400000)
+#define RTC_CR_POL ((uint32_t)0x00100000)
+#define RTC_CR_COSEL ((uint32_t)0x00080000)
+#define RTC_CR_BCK ((uint32_t)0x00040000)
+#define RTC_CR_SUB1H ((uint32_t)0x00020000)
+#define RTC_CR_ADD1H ((uint32_t)0x00010000)
+#define RTC_CR_TSIE ((uint32_t)0x00008000)
+#define RTC_CR_ALRAIE ((uint32_t)0x00001000)
+#define RTC_CR_TSE ((uint32_t)0x00000800)
+#define RTC_CR_WUTE ((uint32_t)0x00000400)
+#define RTC_CR_ALRAE ((uint32_t)0x00000100)
+#define RTC_CR_FMT ((uint32_t)0x00000040)
+#define RTC_CR_BYPSHAD ((uint32_t)0x00000020)
+#define RTC_CR_REFCKON ((uint32_t)0x00000010)
+#define RTC_CR_TSEDGE ((uint32_t)0x00000008)
+#define RTC_CR_WUCKSEL ((uint32_t)0x00000007)
+#define RTC_CR_WUCKSEL_0 ((uint32_t)0x00000001)
+#define RTC_CR_WUCKSEL_1 ((uint32_t)0x00000002)
+#define RTC_CR_WUCKSEL_2 ((uint32_t)0x00000004)
+
+/******************** Bits definition for RTC_ISR register *****************/
+#define RTC_ISR_RECALPF ((uint32_t)0x00010000)
+#define RTC_ISR_TAMP3F ((uint32_t)0x00008000)
+#define RTC_ISR_TAMP2F ((uint32_t)0x00004000)
+#define RTC_ISR_TAMP1F ((uint32_t)0x00002000)
+#define RTC_ISR_TSOVF ((uint32_t)0x00001000)
+#define RTC_ISR_TSF ((uint32_t)0x00000800)
+#define RTC_ISR_WUTF ((uint32_t)0x00000400)
+#define RTC_ISR_ALRAF ((uint32_t)0x00000100)
+#define RTC_ISR_INIT ((uint32_t)0x00000080)
+#define RTC_ISR_INITF ((uint32_t)0x00000040)
+#define RTC_ISR_RSF ((uint32_t)0x00000020)
+#define RTC_ISR_INITS ((uint32_t)0x00000010)
+#define RTC_ISR_SHPF ((uint32_t)0x00000008)
+#define RTC_ISR_WUTWF ((uint32_t)0x00000004)
+#define RTC_ISR_ALRAWF ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_PRER register ****************/
+#define RTC_PRER_PREDIV_A ((uint32_t)0x007F0000)
+#define RTC_PRER_PREDIV_S ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_WUTR register ****************/
+#define RTC_WUTR_WUT ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_ALRMAR register **************/
+#define RTC_ALRMAR_MSK4 ((uint32_t)0x80000000)
+#define RTC_ALRMAR_WDSEL ((uint32_t)0x40000000)
+#define RTC_ALRMAR_DT ((uint32_t)0x30000000)
+#define RTC_ALRMAR_DT_0 ((uint32_t)0x10000000)
+#define RTC_ALRMAR_DT_1 ((uint32_t)0x20000000)
+#define RTC_ALRMAR_DU ((uint32_t)0x0F000000)
+#define RTC_ALRMAR_DU_0 ((uint32_t)0x01000000)
+#define RTC_ALRMAR_DU_1 ((uint32_t)0x02000000)
+#define RTC_ALRMAR_DU_2 ((uint32_t)0x04000000)
+#define RTC_ALRMAR_DU_3 ((uint32_t)0x08000000)
+#define RTC_ALRMAR_MSK3 ((uint32_t)0x00800000)
+#define RTC_ALRMAR_PM ((uint32_t)0x00400000)
+#define RTC_ALRMAR_HT ((uint32_t)0x00300000)
+#define RTC_ALRMAR_HT_0 ((uint32_t)0x00100000)
+#define RTC_ALRMAR_HT_1 ((uint32_t)0x00200000)
+#define RTC_ALRMAR_HU ((uint32_t)0x000F0000)
+#define RTC_ALRMAR_HU_0 ((uint32_t)0x00010000)
+#define RTC_ALRMAR_HU_1 ((uint32_t)0x00020000)
+#define RTC_ALRMAR_HU_2 ((uint32_t)0x00040000)
+#define RTC_ALRMAR_HU_3 ((uint32_t)0x00080000)
+#define RTC_ALRMAR_MSK2 ((uint32_t)0x00008000)
+#define RTC_ALRMAR_MNT ((uint32_t)0x00007000)
+#define RTC_ALRMAR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_ALRMAR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_ALRMAR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_ALRMAR_MNU ((uint32_t)0x00000F00)
+#define RTC_ALRMAR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_ALRMAR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_ALRMAR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_ALRMAR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_ALRMAR_MSK1 ((uint32_t)0x00000080)
+#define RTC_ALRMAR_ST ((uint32_t)0x00000070)
+#define RTC_ALRMAR_ST_0 ((uint32_t)0x00000010)
+#define RTC_ALRMAR_ST_1 ((uint32_t)0x00000020)
+#define RTC_ALRMAR_ST_2 ((uint32_t)0x00000040)
+#define RTC_ALRMAR_SU ((uint32_t)0x0000000F)
+#define RTC_ALRMAR_SU_0 ((uint32_t)0x00000001)
+#define RTC_ALRMAR_SU_1 ((uint32_t)0x00000002)
+#define RTC_ALRMAR_SU_2 ((uint32_t)0x00000004)
+#define RTC_ALRMAR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_WPR register *****************/
+#define RTC_WPR_KEY ((uint32_t)0x000000FF)
+
+/******************** Bits definition for RTC_SSR register *****************/
+#define RTC_SSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_SHIFTR register **************/
+#define RTC_SHIFTR_SUBFS ((uint32_t)0x00007FFF)
+#define RTC_SHIFTR_ADD1S ((uint32_t)0x80000000)
+
+/******************** Bits definition for RTC_TSTR register ****************/
+#define RTC_TSTR_PM ((uint32_t)0x00400000)
+#define RTC_TSTR_HT ((uint32_t)0x00300000)
+#define RTC_TSTR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TSTR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TSTR_HU ((uint32_t)0x000F0000)
+#define RTC_TSTR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TSTR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TSTR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TSTR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TSTR_MNT ((uint32_t)0x00007000)
+#define RTC_TSTR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TSTR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TSTR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TSTR_MNU ((uint32_t)0x00000F00)
+#define RTC_TSTR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TSTR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TSTR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TSTR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TSTR_ST ((uint32_t)0x00000070)
+#define RTC_TSTR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TSTR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TSTR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TSTR_SU ((uint32_t)0x0000000F)
+#define RTC_TSTR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TSTR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TSTR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TSTR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSDR register ****************/
+#define RTC_TSDR_WDU ((uint32_t)0x0000E000)
+#define RTC_TSDR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_TSDR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_TSDR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_TSDR_MT ((uint32_t)0x00001000)
+#define RTC_TSDR_MU ((uint32_t)0x00000F00)
+#define RTC_TSDR_MU_0 ((uint32_t)0x00000100)
+#define RTC_TSDR_MU_1 ((uint32_t)0x00000200)
+#define RTC_TSDR_MU_2 ((uint32_t)0x00000400)
+#define RTC_TSDR_MU_3 ((uint32_t)0x00000800)
+#define RTC_TSDR_DT ((uint32_t)0x00000030)
+#define RTC_TSDR_DT_0 ((uint32_t)0x00000010)
+#define RTC_TSDR_DT_1 ((uint32_t)0x00000020)
+#define RTC_TSDR_DU ((uint32_t)0x0000000F)
+#define RTC_TSDR_DU_0 ((uint32_t)0x00000001)
+#define RTC_TSDR_DU_1 ((uint32_t)0x00000002)
+#define RTC_TSDR_DU_2 ((uint32_t)0x00000004)
+#define RTC_TSDR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSSSR register ***************/
+#define RTC_TSSSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_CALR register ****************/
+#define RTC_CALR_CALP ((uint32_t)0x00008000)
+#define RTC_CALR_CALW8 ((uint32_t)0x00004000)
+#define RTC_CALR_CALW16 ((uint32_t)0x00002000)
+#define RTC_CALR_CALM ((uint32_t)0x000001FF)
+#define RTC_CALR_CALM_0 ((uint32_t)0x00000001)
+#define RTC_CALR_CALM_1 ((uint32_t)0x00000002)
+#define RTC_CALR_CALM_2 ((uint32_t)0x00000004)
+#define RTC_CALR_CALM_3 ((uint32_t)0x00000008)
+#define RTC_CALR_CALM_4 ((uint32_t)0x00000010)
+#define RTC_CALR_CALM_5 ((uint32_t)0x00000020)
+#define RTC_CALR_CALM_6 ((uint32_t)0x00000040)
+#define RTC_CALR_CALM_7 ((uint32_t)0x00000080)
+#define RTC_CALR_CALM_8 ((uint32_t)0x00000100)
+
+/******************** Bits definition for RTC_TAFCR register ***************/
+#define RTC_TAFCR_ALARMOUTTYPE ((uint32_t)0x00040000)
+#define RTC_TAFCR_TAMPPUDIS ((uint32_t)0x00008000)
+#define RTC_TAFCR_TAMPPRCH ((uint32_t)0x00006000)
+#define RTC_TAFCR_TAMPPRCH_0 ((uint32_t)0x00002000)
+#define RTC_TAFCR_TAMPPRCH_1 ((uint32_t)0x00004000)
+#define RTC_TAFCR_TAMPFLT ((uint32_t)0x00001800)
+#define RTC_TAFCR_TAMPFLT_0 ((uint32_t)0x00000800)
+#define RTC_TAFCR_TAMPFLT_1 ((uint32_t)0x00001000)
+#define RTC_TAFCR_TAMPFREQ ((uint32_t)0x00000700)
+#define RTC_TAFCR_TAMPFREQ_0 ((uint32_t)0x00000100)
+#define RTC_TAFCR_TAMPFREQ_1 ((uint32_t)0x00000200)
+#define RTC_TAFCR_TAMPFREQ_2 ((uint32_t)0x00000400)
+#define RTC_TAFCR_TAMPTS ((uint32_t)0x00000080)
+#define RTC_TAFCR_TAMP3TRG ((uint32_t)0x00000040)
+#define RTC_TAFCR_TAMP3E ((uint32_t)0x00000020)
+#define RTC_TAFCR_TAMP2TRG ((uint32_t)0x00000010)
+#define RTC_TAFCR_TAMP2E ((uint32_t)0x00000008)
+#define RTC_TAFCR_TAMPIE ((uint32_t)0x00000004)
+#define RTC_TAFCR_TAMP1TRG ((uint32_t)0x00000002)
+#define RTC_TAFCR_TAMP1E ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_ALRMASSR register ************/
+#define RTC_ALRMASSR_MASKSS ((uint32_t)0x0F000000)
+#define RTC_ALRMASSR_MASKSS_0 ((uint32_t)0x01000000)
+#define RTC_ALRMASSR_MASKSS_1 ((uint32_t)0x02000000)
+#define RTC_ALRMASSR_MASKSS_2 ((uint32_t)0x04000000)
+#define RTC_ALRMASSR_MASKSS_3 ((uint32_t)0x08000000)
+#define RTC_ALRMASSR_SS ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_BKP0R register ***************/
+#define RTC_BKP0R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP1R register ***************/
+#define RTC_BKP1R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP2R register ***************/
+#define RTC_BKP2R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP3R register ***************/
+#define RTC_BKP3R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP4R register ***************/
+#define RTC_BKP4R ((uint32_t)0xFFFFFFFF)
+
+/******************** Number of backup registers ******************************/
+#define RTC_BKP_NUMBER ((uint32_t)0x00000005)
+
+/*****************************************************************************/
+/* */
+/* Serial Peripheral Interface (SPI) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for SPI_CR1 register *******************/
+#define SPI_CR1_CPHA ((uint32_t)0x00000001) /*!< Clock Phase */
+#define SPI_CR1_CPOL ((uint32_t)0x00000002) /*!< Clock Polarity */
+#define SPI_CR1_MSTR ((uint32_t)0x00000004) /*!< Master Selection */
+#define SPI_CR1_BR ((uint32_t)0x00000038) /*!< BR[2:0] bits (Baud Rate Control) */
+#define SPI_CR1_BR_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define SPI_CR1_BR_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define SPI_CR1_BR_2 ((uint32_t)0x00000020) /*!< Bit 2 */
+#define SPI_CR1_SPE ((uint32_t)0x00000040) /*!< SPI Enable */
+#define SPI_CR1_LSBFIRST ((uint32_t)0x00000080) /*!< Frame Format */
+#define SPI_CR1_SSI ((uint32_t)0x00000100) /*!< Internal slave select */
+#define SPI_CR1_SSM ((uint32_t)0x00000200) /*!< Software slave management */
+#define SPI_CR1_RXONLY ((uint32_t)0x00000400) /*!< Receive only */
+#define SPI_CR1_CRCL ((uint32_t)0x00000800) /*!< CRC Length */
+#define SPI_CR1_CRCNEXT ((uint32_t)0x00001000) /*!< Transmit CRC next */
+#define SPI_CR1_CRCEN ((uint32_t)0x00002000) /*!< Hardware CRC calculation enable */
+#define SPI_CR1_BIDIOE ((uint32_t)0x00004000) /*!< Output enable in bidirectional mode */
+#define SPI_CR1_BIDIMODE ((uint32_t)0x00008000) /*!< Bidirectional data mode enable */
+
+/******************* Bit definition for SPI_CR2 register *******************/
+#define SPI_CR2_RXDMAEN ((uint32_t)0x00000001) /*!< Rx Buffer DMA Enable */
+#define SPI_CR2_TXDMAEN ((uint32_t)0x00000002) /*!< Tx Buffer DMA Enable */
+#define SPI_CR2_SSOE ((uint32_t)0x00000004) /*!< SS Output Enable */
+#define SPI_CR2_NSSP ((uint32_t)0x00000008) /*!< NSS pulse management Enable */
+#define SPI_CR2_FRF ((uint32_t)0x00000010) /*!< Frame Format Enable */
+#define SPI_CR2_ERRIE ((uint32_t)0x00000020) /*!< Error Interrupt Enable */
+#define SPI_CR2_RXNEIE ((uint32_t)0x00000040) /*!< RX buffer Not Empty Interrupt Enable */
+#define SPI_CR2_TXEIE ((uint32_t)0x00000080) /*!< Tx buffer Empty Interrupt Enable */
+#define SPI_CR2_DS ((uint32_t)0x00000F00) /*!< DS[3:0] Data Size */
+#define SPI_CR2_DS_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define SPI_CR2_DS_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define SPI_CR2_DS_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define SPI_CR2_DS_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+#define SPI_CR2_FRXTH ((uint32_t)0x00001000) /*!< FIFO reception Threshold */
+#define SPI_CR2_LDMARX ((uint32_t)0x00002000) /*!< Last DMA transfer for reception */
+#define SPI_CR2_LDMATX ((uint32_t)0x00004000) /*!< Last DMA transfer for transmission */
+
+/******************** Bit definition for SPI_SR register *******************/
+#define SPI_SR_RXNE ((uint32_t)0x00000001) /*!< Receive buffer Not Empty */
+#define SPI_SR_TXE ((uint32_t)0x00000002) /*!< Transmit buffer Empty */
+#define SPI_SR_CHSIDE ((uint32_t)0x00000004) /*!< Channel side */
+#define SPI_SR_UDR ((uint32_t)0x00000008) /*!< Underrun flag */
+#define SPI_SR_CRCERR ((uint32_t)0x00000010) /*!< CRC Error flag */
+#define SPI_SR_MODF ((uint32_t)0x00000020) /*!< Mode fault */
+#define SPI_SR_OVR ((uint32_t)0x00000040) /*!< Overrun flag */
+#define SPI_SR_BSY ((uint32_t)0x00000080) /*!< Busy flag */
+#define SPI_SR_FRE ((uint32_t)0x00000100) /*!< TI frame format error */
+#define SPI_SR_FRLVL ((uint32_t)0x00000600) /*!< FIFO Reception Level */
+#define SPI_SR_FRLVL_0 ((uint32_t)0x00000200) /*!< Bit 0 */
+#define SPI_SR_FRLVL_1 ((uint32_t)0x00000400) /*!< Bit 1 */
+#define SPI_SR_FTLVL ((uint32_t)0x00001800) /*!< FIFO Transmission Level */
+#define SPI_SR_FTLVL_0 ((uint32_t)0x00000800) /*!< Bit 0 */
+#define SPI_SR_FTLVL_1 ((uint32_t)0x00001000) /*!< Bit 1 */
+
+/******************** Bit definition for SPI_DR register *******************/
+#define SPI_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data Register */
+
+/******************* Bit definition for SPI_CRCPR register *****************/
+#define SPI_CRCPR_CRCPOLY ((uint32_t)0xFFFFFFFF) /*!< CRC polynomial register */
+
+/****************** Bit definition for SPI_RXCRCR register *****************/
+#define SPI_RXCRCR_RXCRC ((uint32_t)0xFFFFFFFF) /*!< Rx CRC Register */
+
+/****************** Bit definition for SPI_TXCRCR register *****************/
+#define SPI_TXCRCR_TXCRC ((uint32_t)0xFFFFFFFF) /*!< Tx CRC Register */
+
+/****************** Bit definition for SPI_I2SCFGR register ****************/
+#define SPI_I2SCFGR_CHLEN ((uint32_t)0x00000001) /*!<Channel length (number of bits per audio channel) */
+#define SPI_I2SCFGR_DATLEN ((uint32_t)0x00000006) /*!<DATLEN[1:0] bits (Data length to be transferred) */
+#define SPI_I2SCFGR_DATLEN_0 ((uint32_t)0x00000002) /*!<Bit 0 */
+#define SPI_I2SCFGR_DATLEN_1 ((uint32_t)0x00000004) /*!<Bit 1 */
+#define SPI_I2SCFGR_CKPOL ((uint32_t)0x00000008) /*!<steady state clock polarity */
+#define SPI_I2SCFGR_I2SSTD ((uint32_t)0x00000030) /*!<I2SSTD[1:0] bits (I2S standard selection) */
+#define SPI_I2SCFGR_I2SSTD_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SSTD_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define SPI_I2SCFGR_PCMSYNC ((uint32_t)0x00000080) /*!<PCM frame synchronization */
+#define SPI_I2SCFGR_I2SCFG ((uint32_t)0x00000300) /*!<I2SCFG[1:0] bits (I2S configuration mode) */
+#define SPI_I2SCFGR_I2SCFG_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SCFG_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define SPI_I2SCFGR_I2SE ((uint32_t)0x00000400) /*!<I2S Enable */
+#define SPI_I2SCFGR_I2SMOD ((uint32_t)0x00000800) /*!<I2S mode selection */
+
+/****************** Bit definition for SPI_I2SPR register ******************/
+#define SPI_I2SPR_I2SDIV ((uint32_t)0x000000FF) /*!<I2S Linear prescaler */
+#define SPI_I2SPR_ODD ((uint32_t)0x00000100) /*!<Odd factor for the prescaler */
+#define SPI_I2SPR_MCKOE ((uint32_t)0x00000200) /*!<Master Clock Output Enable */
+
+/*****************************************************************************/
+/* */
+/* System Configuration (SYSCFG) */
+/* */
+/*****************************************************************************/
+/***************** Bit definition for SYSCFG_CFGR1 register ****************/
+#define SYSCFG_CFGR1_MEM_MODE ((uint32_t)0x00000003) /*!< SYSCFG_Memory Remap Config */
+#define SYSCFG_CFGR1_MEM_MODE_0 ((uint32_t)0x00000001) /*!< SYSCFG_Memory Remap Config Bit 0 */
+#define SYSCFG_CFGR1_MEM_MODE_1 ((uint32_t)0x00000002) /*!< SYSCFG_Memory Remap Config Bit 1 */
+
+#define SYSCFG_CFGR1_DMA_RMP ((uint32_t)0x7F007F00) /*!< DMA remap mask */
+#define SYSCFG_CFGR1_ADC_DMA_RMP ((uint32_t)0x00000100) /*!< ADC DMA remap */
+#define SYSCFG_CFGR1_USART1TX_DMA_RMP ((uint32_t)0x00000200) /*!< USART1 TX DMA remap */
+#define SYSCFG_CFGR1_USART1RX_DMA_RMP ((uint32_t)0x00000400) /*!< USART1 RX DMA remap */
+#define SYSCFG_CFGR1_TIM16_DMA_RMP ((uint32_t)0x00000800) /*!< Timer 16 DMA remap */
+#define SYSCFG_CFGR1_TIM17_DMA_RMP ((uint32_t)0x00001000) /*!< Timer 17 DMA remap */
+#define SYSCFG_CFGR1_TIM16_DMA_RMP2 ((uint32_t)0x00002000) /*!< Timer 16 DMA remap 2 */
+#define SYSCFG_CFGR1_TIM17_DMA_RMP2 ((uint32_t)0x00004000) /*!< Timer 17 DMA remap 2 */
+#define SYSCFG_CFGR1_SPI2_DMA_RMP ((uint32_t)0x01000000) /*!< SPI2 DMA remap */
+#define SYSCFG_CFGR1_USART2_DMA_RMP ((uint32_t)0x02000000) /*!< USART2 DMA remap */
+#define SYSCFG_CFGR1_USART3_DMA_RMP ((uint32_t)0x04000000) /*!< USART3 DMA remap */
+#define SYSCFG_CFGR1_I2C1_DMA_RMP ((uint32_t)0x08000000) /*!< I2C1 DMA remap */
+#define SYSCFG_CFGR1_TIM1_DMA_RMP ((uint32_t)0x10000000) /*!< TIM1 DMA remap */
+#define SYSCFG_CFGR1_TIM2_DMA_RMP ((uint32_t)0x20000000) /*!< TIM2 DMA remap */
+#define SYSCFG_CFGR1_TIM3_DMA_RMP ((uint32_t)0x40000000) /*!< TIM3 DMA remap */
+
+#define SYSCFG_CFGR1_I2C_FMP_PB6 ((uint32_t)0x00010000) /*!< I2C PB6 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB7 ((uint32_t)0x00020000) /*!< I2C PB7 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB8 ((uint32_t)0x00040000) /*!< I2C PB8 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB9 ((uint32_t)0x00080000) /*!< I2C PB9 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_I2C1 ((uint32_t)0x00100000) /*!< Enable Fast Mode Plus on PB10, PB11, PF6 and PF7 */
+#define SYSCFG_CFGR1_I2C_FMP_I2C2 ((uint32_t)0x00200000) /*!< Enable I2C2 Fast mode plus */
+
+/***************** Bit definition for SYSCFG_EXTICR1 register **************/
+#define SYSCFG_EXTICR1_EXTI0 ((uint16_t)0x000F) /*!< EXTI 0 configuration */
+#define SYSCFG_EXTICR1_EXTI1 ((uint16_t)0x00F0) /*!< EXTI 1 configuration */
+#define SYSCFG_EXTICR1_EXTI2 ((uint16_t)0x0F00) /*!< EXTI 2 configuration */
+#define SYSCFG_EXTICR1_EXTI3 ((uint16_t)0xF000) /*!< EXTI 3 configuration */
+
+/**
+ * @brief EXTI0 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI0_PA ((uint16_t)0x0000) /*!< PA[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PB ((uint16_t)0x0001) /*!< PB[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PC ((uint16_t)0x0002) /*!< PC[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PD ((uint16_t)0x0003) /*!< PD[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PE ((uint16_t)0x0004) /*!< PE[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PF ((uint16_t)0x0005) /*!< PF[0] pin */
+
+/**
+ * @brief EXTI1 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI1_PA ((uint16_t)0x0000) /*!< PA[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PB ((uint16_t)0x0010) /*!< PB[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PC ((uint16_t)0x0020) /*!< PC[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PD ((uint16_t)0x0030) /*!< PD[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PE ((uint16_t)0x0040) /*!< PE[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PF ((uint16_t)0x0050) /*!< PF[1] pin */
+
+/**
+ * @brief EXTI2 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI2_PA ((uint16_t)0x0000) /*!< PA[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PB ((uint16_t)0x0100) /*!< PB[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PC ((uint16_t)0x0200) /*!< PC[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PD ((uint16_t)0x0300) /*!< PD[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PE ((uint16_t)0x0400) /*!< PE[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PF ((uint16_t)0x0500) /*!< PF[2] pin */
+
+/**
+ * @brief EXTI3 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI3_PA ((uint16_t)0x0000) /*!< PA[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PB ((uint16_t)0x1000) /*!< PB[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PC ((uint16_t)0x2000) /*!< PC[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PD ((uint16_t)0x3000) /*!< PD[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PE ((uint16_t)0x4000) /*!< PE[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PF ((uint16_t)0x5000) /*!< PF[3] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR2 register **************/
+#define SYSCFG_EXTICR2_EXTI4 ((uint16_t)0x000F) /*!< EXTI 4 configuration */
+#define SYSCFG_EXTICR2_EXTI5 ((uint16_t)0x00F0) /*!< EXTI 5 configuration */
+#define SYSCFG_EXTICR2_EXTI6 ((uint16_t)0x0F00) /*!< EXTI 6 configuration */
+#define SYSCFG_EXTICR2_EXTI7 ((uint16_t)0xF000) /*!< EXTI 7 configuration */
+
+/**
+ * @brief EXTI4 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI4_PA ((uint16_t)0x0000) /*!< PA[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PB ((uint16_t)0x0001) /*!< PB[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PC ((uint16_t)0x0002) /*!< PC[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PD ((uint16_t)0x0003) /*!< PD[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PE ((uint16_t)0x0004) /*!< PE[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PF ((uint16_t)0x0005) /*!< PF[4] pin */
+
+/**
+ * @brief EXTI5 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI5_PA ((uint16_t)0x0000) /*!< PA[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PB ((uint16_t)0x0010) /*!< PB[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PC ((uint16_t)0x0020) /*!< PC[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PD ((uint16_t)0x0030) /*!< PD[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PE ((uint16_t)0x0040) /*!< PE[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PF ((uint16_t)0x0050) /*!< PF[5] pin */
+
+/**
+ * @brief EXTI6 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI6_PA ((uint16_t)0x0000) /*!< PA[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PB ((uint16_t)0x0100) /*!< PB[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PC ((uint16_t)0x0200) /*!< PC[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PD ((uint16_t)0x0300) /*!< PD[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PE ((uint16_t)0x0400) /*!< PE[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PF ((uint16_t)0x0500) /*!< PF[6] pin */
+
+/**
+ * @brief EXTI7 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI7_PA ((uint16_t)0x0000) /*!< PA[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PB ((uint16_t)0x1000) /*!< PB[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PC ((uint16_t)0x2000) /*!< PC[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PD ((uint16_t)0x3000) /*!< PD[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PE ((uint16_t)0x4000) /*!< PE[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PF ((uint16_t)0x5000) /*!< PF[7] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR3 register **************/
+#define SYSCFG_EXTICR3_EXTI8 ((uint16_t)0x000F) /*!< EXTI 8 configuration */
+#define SYSCFG_EXTICR3_EXTI9 ((uint16_t)0x00F0) /*!< EXTI 9 configuration */
+#define SYSCFG_EXTICR3_EXTI10 ((uint16_t)0x0F00) /*!< EXTI 10 configuration */
+#define SYSCFG_EXTICR3_EXTI11 ((uint16_t)0xF000) /*!< EXTI 11 configuration */
+
+/**
+ * @brief EXTI8 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI8_PA ((uint16_t)0x0000) /*!< PA[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PB ((uint16_t)0x0001) /*!< PB[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PC ((uint16_t)0x0002) /*!< PC[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PD ((uint16_t)0x0003) /*!< PD[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PE ((uint16_t)0x0004) /*!< PE[8] pin */
+
+/**
+ * @brief EXTI9 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI9_PA ((uint16_t)0x0000) /*!< PA[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PB ((uint16_t)0x0010) /*!< PB[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PC ((uint16_t)0x0020) /*!< PC[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PD ((uint16_t)0x0030) /*!< PD[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PE ((uint16_t)0x0040) /*!< PE[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PF ((uint16_t)0x0050) /*!< PF[9] pin */
+
+/**
+ * @brief EXTI10 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI10_PA ((uint16_t)0x0000) /*!< PA[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PB ((uint16_t)0x0100) /*!< PB[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PC ((uint16_t)0x0200) /*!< PC[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PD ((uint16_t)0x0300) /*!< PE[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PE ((uint16_t)0x0400) /*!< PD[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PF ((uint16_t)0x0500) /*!< PF[10] pin */
+
+/**
+ * @brief EXTI11 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI11_PA ((uint16_t)0x0000) /*!< PA[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PB ((uint16_t)0x1000) /*!< PB[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PC ((uint16_t)0x2000) /*!< PC[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PD ((uint16_t)0x3000) /*!< PD[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PE ((uint16_t)0x4000) /*!< PE[11] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR4 register **************/
+#define SYSCFG_EXTICR4_EXTI12 ((uint16_t)0x000F) /*!< EXTI 12 configuration */
+#define SYSCFG_EXTICR4_EXTI13 ((uint16_t)0x00F0) /*!< EXTI 13 configuration */
+#define SYSCFG_EXTICR4_EXTI14 ((uint16_t)0x0F00) /*!< EXTI 14 configuration */
+#define SYSCFG_EXTICR4_EXTI15 ((uint16_t)0xF000) /*!< EXTI 15 configuration */
+
+/**
+ * @brief EXTI12 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI12_PA ((uint16_t)0x0000) /*!< PA[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PB ((uint16_t)0x0001) /*!< PB[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PC ((uint16_t)0x0002) /*!< PC[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PD ((uint16_t)0x0003) /*!< PD[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PE ((uint16_t)0x0004) /*!< PE[12] pin */
+
+/**
+ * @brief EXTI13 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI13_PA ((uint16_t)0x0000) /*!< PA[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PB ((uint16_t)0x0010) /*!< PB[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PC ((uint16_t)0x0020) /*!< PC[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PD ((uint16_t)0x0030) /*!< PD[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PE ((uint16_t)0x0040) /*!< PE[13] pin */
+
+/**
+ * @brief EXTI14 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI14_PA ((uint16_t)0x0000) /*!< PA[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PB ((uint16_t)0x0100) /*!< PB[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PC ((uint16_t)0x0200) /*!< PC[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PD ((uint16_t)0x0300) /*!< PD[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PE ((uint16_t)0x0400) /*!< PE[14] pin */
+
+/**
+ * @brief EXTI15 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI15_PA ((uint16_t)0x0000) /*!< PA[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PB ((uint16_t)0x1000) /*!< PB[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PC ((uint16_t)0x2000) /*!< PC[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PD ((uint16_t)0x3000) /*!< PD[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PE ((uint16_t)0x4000) /*!< PE[15] pin */
+
+/***************** Bit definition for SYSCFG_CFGR2 register ****************/
+#define SYSCFG_CFGR2_LOCKUP_LOCK ((uint32_t)0x00000001) /*!< Enables and locks the LOCKUP (Hardfault) output of CortexM0 with Break Input of TIMER1 */
+#define SYSCFG_CFGR2_SRAM_PARITY_LOCK ((uint32_t)0x00000002) /*!< Enables and locks the SRAM_PARITY error signal with Break Input of TIMER1 */
+#define SYSCFG_CFGR2_SRAM_PEF ((uint32_t)0x00000100) /*!< SRAM Parity error flag */
+#define SYSCFG_CFGR2_SRAM_PE SYSCFG_CFGR2_SRAM_PEF /*!< SRAM Parity error flag (define maintained for legacy purpose) */
+
+/*****************************************************************************/
+/* */
+/* Timers (TIM) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for TIM_CR1 register *******************/
+#define TIM_CR1_CEN ((uint32_t)0x00000001) /*!<Counter enable */
+#define TIM_CR1_UDIS ((uint32_t)0x00000002) /*!<Update disable */
+#define TIM_CR1_URS ((uint32_t)0x00000004) /*!<Update request source */
+#define TIM_CR1_OPM ((uint32_t)0x00000008) /*!<One pulse mode */
+#define TIM_CR1_DIR ((uint32_t)0x00000010) /*!<Direction */
+
+#define TIM_CR1_CMS ((uint32_t)0x00000060) /*!<CMS[1:0] bits (Center-aligned mode selection) */
+#define TIM_CR1_CMS_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define TIM_CR1_CMS_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+
+#define TIM_CR1_ARPE ((uint32_t)0x00000080) /*!<Auto-reload preload enable */
+
+#define TIM_CR1_CKD ((uint32_t)0x00000300) /*!<CKD[1:0] bits (clock division) */
+#define TIM_CR1_CKD_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CR1_CKD_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+/******************* Bit definition for TIM_CR2 register *******************/
+#define TIM_CR2_CCPC ((uint32_t)0x00000001) /*!<Capture/Compare Preloaded Control */
+#define TIM_CR2_CCUS ((uint32_t)0x00000004) /*!<Capture/Compare Control Update Selection */
+#define TIM_CR2_CCDS ((uint32_t)0x00000008) /*!<Capture/Compare DMA Selection */
+
+#define TIM_CR2_MMS ((uint32_t)0x00000070) /*!<MMS[2:0] bits (Master Mode Selection) */
+#define TIM_CR2_MMS_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CR2_MMS_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CR2_MMS_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CR2_TI1S ((uint32_t)0x00000080) /*!<TI1 Selection */
+#define TIM_CR2_OIS1 ((uint32_t)0x00000100) /*!<Output Idle state 1 (OC1 output) */
+#define TIM_CR2_OIS1N ((uint32_t)0x00000200) /*!<Output Idle state 1 (OC1N output) */
+#define TIM_CR2_OIS2 ((uint32_t)0x00000400) /*!<Output Idle state 2 (OC2 output) */
+#define TIM_CR2_OIS2N ((uint32_t)0x00000800) /*!<Output Idle state 2 (OC2N output) */
+#define TIM_CR2_OIS3 ((uint32_t)0x00001000) /*!<Output Idle state 3 (OC3 output) */
+#define TIM_CR2_OIS3N ((uint32_t)0x00002000) /*!<Output Idle state 3 (OC3N output) */
+#define TIM_CR2_OIS4 ((uint32_t)0x00004000) /*!<Output Idle state 4 (OC4 output) */
+
+/******************* Bit definition for TIM_SMCR register ******************/
+#define TIM_SMCR_SMS ((uint32_t)0x00000007) /*!<SMS[2:0] bits (Slave mode selection) */
+#define TIM_SMCR_SMS_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_SMCR_SMS_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_SMCR_SMS_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+
+#define TIM_SMCR_OCCS ((uint32_t)0x00000008) /*!< OCREF clear selection */
+
+#define TIM_SMCR_TS ((uint32_t)0x00000070) /*!<TS[2:0] bits (Trigger selection) */
+#define TIM_SMCR_TS_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_SMCR_TS_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_SMCR_TS_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_SMCR_MSM ((uint32_t)0x00000080) /*!<Master/slave mode */
+
+#define TIM_SMCR_ETF ((uint32_t)0x00000F00) /*!<ETF[3:0] bits (External trigger filter) */
+#define TIM_SMCR_ETF_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_SMCR_ETF_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define TIM_SMCR_ETF_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define TIM_SMCR_ETF_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+
+#define TIM_SMCR_ETPS ((uint32_t)0x00003000) /*!<ETPS[1:0] bits (External trigger prescaler) */
+#define TIM_SMCR_ETPS_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_SMCR_ETPS_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+
+#define TIM_SMCR_ECE ((uint32_t)0x00004000) /*!<External clock enable */
+#define TIM_SMCR_ETP ((uint32_t)0x00008000) /*!<External trigger polarity */
+
+/******************* Bit definition for TIM_DIER register ******************/
+#define TIM_DIER_UIE ((uint32_t)0x00000001) /*!<Update interrupt enable */
+#define TIM_DIER_CC1IE ((uint32_t)0x00000002) /*!<Capture/Compare 1 interrupt enable */
+#define TIM_DIER_CC2IE ((uint32_t)0x00000004) /*!<Capture/Compare 2 interrupt enable */
+#define TIM_DIER_CC3IE ((uint32_t)0x00000008) /*!<Capture/Compare 3 interrupt enable */
+#define TIM_DIER_CC4IE ((uint32_t)0x00000010) /*!<Capture/Compare 4 interrupt enable */
+#define TIM_DIER_COMIE ((uint32_t)0x00000020) /*!<COM interrupt enable */
+#define TIM_DIER_TIE ((uint32_t)0x00000040) /*!<Trigger interrupt enable */
+#define TIM_DIER_BIE ((uint32_t)0x00000080) /*!<Break interrupt enable */
+#define TIM_DIER_UDE ((uint32_t)0x00000100) /*!<Update DMA request enable */
+#define TIM_DIER_CC1DE ((uint32_t)0x00000200) /*!<Capture/Compare 1 DMA request enable */
+#define TIM_DIER_CC2DE ((uint32_t)0x00000400) /*!<Capture/Compare 2 DMA request enable */
+#define TIM_DIER_CC3DE ((uint32_t)0x00000800) /*!<Capture/Compare 3 DMA request enable */
+#define TIM_DIER_CC4DE ((uint32_t)0x00001000) /*!<Capture/Compare 4 DMA request enable */
+#define TIM_DIER_COMDE ((uint32_t)0x00002000) /*!<COM DMA request enable */
+#define TIM_DIER_TDE ((uint32_t)0x00004000) /*!<Trigger DMA request enable */
+
+/******************** Bit definition for TIM_SR register *******************/
+#define TIM_SR_UIF ((uint32_t)0x00000001) /*!<Update interrupt Flag */
+#define TIM_SR_CC1IF ((uint32_t)0x00000002) /*!<Capture/Compare 1 interrupt Flag */
+#define TIM_SR_CC2IF ((uint32_t)0x00000004) /*!<Capture/Compare 2 interrupt Flag */
+#define TIM_SR_CC3IF ((uint32_t)0x00000008) /*!<Capture/Compare 3 interrupt Flag */
+#define TIM_SR_CC4IF ((uint32_t)0x00000010) /*!<Capture/Compare 4 interrupt Flag */
+#define TIM_SR_COMIF ((uint32_t)0x00000020) /*!<COM interrupt Flag */
+#define TIM_SR_TIF ((uint32_t)0x00000040) /*!<Trigger interrupt Flag */
+#define TIM_SR_BIF ((uint32_t)0x00000080) /*!<Break interrupt Flag */
+#define TIM_SR_CC1OF ((uint32_t)0x00000200) /*!<Capture/Compare 1 Overcapture Flag */
+#define TIM_SR_CC2OF ((uint32_t)0x00000400) /*!<Capture/Compare 2 Overcapture Flag */
+#define TIM_SR_CC3OF ((uint32_t)0x00000800) /*!<Capture/Compare 3 Overcapture Flag */
+#define TIM_SR_CC4OF ((uint32_t)0x00001000) /*!<Capture/Compare 4 Overcapture Flag */
+
+/******************* Bit definition for TIM_EGR register *******************/
+#define TIM_EGR_UG ((uint32_t)0x00000001) /*!<Update Generation */
+#define TIM_EGR_CC1G ((uint32_t)0x00000002) /*!<Capture/Compare 1 Generation */
+#define TIM_EGR_CC2G ((uint32_t)0x00000004) /*!<Capture/Compare 2 Generation */
+#define TIM_EGR_CC3G ((uint32_t)0x00000008) /*!<Capture/Compare 3 Generation */
+#define TIM_EGR_CC4G ((uint32_t)0x00000010) /*!<Capture/Compare 4 Generation */
+#define TIM_EGR_COMG ((uint32_t)0x00000020) /*!<Capture/Compare Control Update Generation */
+#define TIM_EGR_TG ((uint32_t)0x00000040) /*!<Trigger Generation */
+#define TIM_EGR_BG ((uint32_t)0x00000080) /*!<Break Generation */
+
+/****************** Bit definition for TIM_CCMR1 register ******************/
+#define TIM_CCMR1_CC1S ((uint32_t)0x00000003) /*!<CC1S[1:0] bits (Capture/Compare 1 Selection) */
+#define TIM_CCMR1_CC1S_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_CCMR1_CC1S_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC1FE ((uint32_t)0x00000004) /*!<Output Compare 1 Fast enable */
+#define TIM_CCMR1_OC1PE ((uint32_t)0x00000008) /*!<Output Compare 1 Preload enable */
+
+#define TIM_CCMR1_OC1M ((uint32_t)0x00000070) /*!<OC1M[2:0] bits (Output Compare 1 Mode) */
+#define TIM_CCMR1_OC1M_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR1_OC1M_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR1_OC1M_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CCMR1_OC1CE ((uint32_t)0x00000080) /*!<Output Compare 1Clear Enable */
+
+#define TIM_CCMR1_CC2S ((uint32_t)0x00000300) /*!<CC2S[1:0] bits (Capture/Compare 2 Selection) */
+#define TIM_CCMR1_CC2S_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CCMR1_CC2S_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC2FE ((uint32_t)0x00000400) /*!<Output Compare 2 Fast enable */
+#define TIM_CCMR1_OC2PE ((uint32_t)0x00000800) /*!<Output Compare 2 Preload enable */
+
+#define TIM_CCMR1_OC2M ((uint32_t)0x00007000) /*!<OC2M[2:0] bits (Output Compare 2 Mode) */
+#define TIM_CCMR1_OC2M_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR1_OC2M_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR1_OC2M_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+
+#define TIM_CCMR1_OC2CE ((uint32_t)0x00008000) /*!<Output Compare 2 Clear Enable */
+
+/*---------------------------------------------------------------------------*/
+
+#define TIM_CCMR1_IC1PSC ((uint32_t)0x0000000C) /*!<IC1PSC[1:0] bits (Input Capture 1 Prescaler) */
+#define TIM_CCMR1_IC1PSC_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define TIM_CCMR1_IC1PSC_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC1F ((uint32_t)0x000000F0) /*!<IC1F[3:0] bits (Input Capture 1 Filter) */
+#define TIM_CCMR1_IC1F_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR1_IC1F_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR1_IC1F_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define TIM_CCMR1_IC1F_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define TIM_CCMR1_IC2PSC ((uint32_t)0x00000C00) /*!<IC2PSC[1:0] bits (Input Capture 2 Prescaler) */
+#define TIM_CCMR1_IC2PSC_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define TIM_CCMR1_IC2PSC_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC2F ((uint32_t)0x0000F000) /*!<IC2F[3:0] bits (Input Capture 2 Filter) */
+#define TIM_CCMR1_IC2F_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR1_IC2F_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR1_IC2F_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define TIM_CCMR1_IC2F_3 ((uint32_t)0x00008000) /*!<Bit 3 */
+
+/****************** Bit definition for TIM_CCMR2 register ******************/
+#define TIM_CCMR2_CC3S ((uint32_t)0x00000003) /*!<CC3S[1:0] bits (Capture/Compare 3 Selection) */
+#define TIM_CCMR2_CC3S_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_CCMR2_CC3S_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC3FE ((uint32_t)0x00000004) /*!<Output Compare 3 Fast enable */
+#define TIM_CCMR2_OC3PE ((uint32_t)0x00000008) /*!<Output Compare 3 Preload enable */
+
+#define TIM_CCMR2_OC3M ((uint32_t)0x00000070) /*!<OC3M[2:0] bits (Output Compare 3 Mode) */
+#define TIM_CCMR2_OC3M_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR2_OC3M_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR2_OC3M_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CCMR2_OC3CE ((uint32_t)0x00000080) /*!<Output Compare 3 Clear Enable */
+
+#define TIM_CCMR2_CC4S ((uint32_t)0x00000300) /*!<CC4S[1:0] bits (Capture/Compare 4 Selection) */
+#define TIM_CCMR2_CC4S_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CCMR2_CC4S_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC4FE ((uint32_t)0x00000400) /*!<Output Compare 4 Fast enable */
+#define TIM_CCMR2_OC4PE ((uint32_t)0x00000800) /*!<Output Compare 4 Preload enable */
+
+#define TIM_CCMR2_OC4M ((uint32_t)0x00007000) /*!<OC4M[2:0] bits (Output Compare 4 Mode) */
+#define TIM_CCMR2_OC4M_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR2_OC4M_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR2_OC4M_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+
+#define TIM_CCMR2_OC4CE ((uint32_t)0x00008000) /*!<Output Compare 4 Clear Enable */
+
+/*---------------------------------------------------------------------------*/
+
+#define TIM_CCMR2_IC3PSC ((uint32_t)0x0000000C) /*!<IC3PSC[1:0] bits (Input Capture 3 Prescaler) */
+#define TIM_CCMR2_IC3PSC_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define TIM_CCMR2_IC3PSC_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC3F ((uint32_t)0x000000F0) /*!<IC3F[3:0] bits (Input Capture 3 Filter) */
+#define TIM_CCMR2_IC3F_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR2_IC3F_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR2_IC3F_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define TIM_CCMR2_IC3F_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define TIM_CCMR2_IC4PSC ((uint32_t)0x00000C00) /*!<IC4PSC[1:0] bits (Input Capture 4 Prescaler) */
+#define TIM_CCMR2_IC4PSC_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define TIM_CCMR2_IC4PSC_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC4F ((uint32_t)0x0000F000) /*!<IC4F[3:0] bits (Input Capture 4 Filter) */
+#define TIM_CCMR2_IC4F_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR2_IC4F_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR2_IC4F_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define TIM_CCMR2_IC4F_3 ((uint32_t)0x00008000) /*!<Bit 3 */
+
+/******************* Bit definition for TIM_CCER register ******************/
+#define TIM_CCER_CC1E ((uint32_t)0x00000001) /*!<Capture/Compare 1 output enable */
+#define TIM_CCER_CC1P ((uint32_t)0x00000002) /*!<Capture/Compare 1 output Polarity */
+#define TIM_CCER_CC1NE ((uint32_t)0x00000004) /*!<Capture/Compare 1 Complementary output enable */
+#define TIM_CCER_CC1NP ((uint32_t)0x00000008) /*!<Capture/Compare 1 Complementary output Polarity */
+#define TIM_CCER_CC2E ((uint32_t)0x00000010) /*!<Capture/Compare 2 output enable */
+#define TIM_CCER_CC2P ((uint32_t)0x00000020) /*!<Capture/Compare 2 output Polarity */
+#define TIM_CCER_CC2NE ((uint32_t)0x00000040) /*!<Capture/Compare 2 Complementary output enable */
+#define TIM_CCER_CC2NP ((uint32_t)0x00000080) /*!<Capture/Compare 2 Complementary output Polarity */
+#define TIM_CCER_CC3E ((uint32_t)0x00000100) /*!<Capture/Compare 3 output enable */
+#define TIM_CCER_CC3P ((uint32_t)0x00000200) /*!<Capture/Compare 3 output Polarity */
+#define TIM_CCER_CC3NE ((uint32_t)0x00000400) /*!<Capture/Compare 3 Complementary output enable */
+#define TIM_CCER_CC3NP ((uint32_t)0x00000800) /*!<Capture/Compare 3 Complementary output Polarity */
+#define TIM_CCER_CC4E ((uint32_t)0x00001000) /*!<Capture/Compare 4 output enable */
+#define TIM_CCER_CC4P ((uint32_t)0x00002000) /*!<Capture/Compare 4 output Polarity */
+#define TIM_CCER_CC4NP ((uint32_t)0x00008000) /*!<Capture/Compare 4 Complementary output Polarity */
+
+/******************* Bit definition for TIM_CNT register *******************/
+#define TIM_CNT_CNT ((uint32_t)0xFFFFFFFF) /*!<Counter Value */
+
+/******************* Bit definition for TIM_PSC register *******************/
+#define TIM_PSC_PSC ((uint32_t)0x0000FFFF) /*!<Prescaler Value */
+
+/******************* Bit definition for TIM_ARR register *******************/
+#define TIM_ARR_ARR ((uint32_t)0xFFFFFFFF) /*!<actual auto-reload Value */
+
+/******************* Bit definition for TIM_RCR register *******************/
+#define TIM_RCR_REP ((uint32_t)0x000000FF) /*!<Repetition Counter Value */
+
+/******************* Bit definition for TIM_CCR1 register ******************/
+#define TIM_CCR1_CCR1 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 1 Value */
+
+/******************* Bit definition for TIM_CCR2 register ******************/
+#define TIM_CCR2_CCR2 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 2 Value */
+
+/******************* Bit definition for TIM_CCR3 register ******************/
+#define TIM_CCR3_CCR3 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 3 Value */
+
+/******************* Bit definition for TIM_CCR4 register ******************/
+#define TIM_CCR4_CCR4 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 4 Value */
+
+/******************* Bit definition for TIM_BDTR register ******************/
+#define TIM_BDTR_DTG ((uint32_t)0x000000FF) /*!<DTG[0:7] bits (Dead-Time Generator set-up) */
+#define TIM_BDTR_DTG_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_BDTR_DTG_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_BDTR_DTG_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define TIM_BDTR_DTG_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define TIM_BDTR_DTG_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define TIM_BDTR_DTG_5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define TIM_BDTR_DTG_6 ((uint32_t)0x00000040) /*!<Bit 6 */
+#define TIM_BDTR_DTG_7 ((uint32_t)0x00000080) /*!<Bit 7 */
+
+#define TIM_BDTR_LOCK ((uint32_t)0x00000300) /*!<LOCK[1:0] bits (Lock Configuration) */
+#define TIM_BDTR_LOCK_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_BDTR_LOCK_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_BDTR_OSSI ((uint32_t)0x00000400) /*!<Off-State Selection for Idle mode */
+#define TIM_BDTR_OSSR ((uint32_t)0x00000800) /*!<Off-State Selection for Run mode */
+#define TIM_BDTR_BKE ((uint32_t)0x00001000) /*!<Break enable */
+#define TIM_BDTR_BKP ((uint32_t)0x00002000) /*!<Break Polarity */
+#define TIM_BDTR_AOE ((uint32_t)0x00004000) /*!<Automatic Output enable */
+#define TIM_BDTR_MOE ((uint32_t)0x00008000) /*!<Main Output enable */
+
+/******************* Bit definition for TIM_DCR register *******************/
+#define TIM_DCR_DBA ((uint32_t)0x0000001F) /*!<DBA[4:0] bits (DMA Base Address) */
+#define TIM_DCR_DBA_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_DCR_DBA_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_DCR_DBA_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define TIM_DCR_DBA_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define TIM_DCR_DBA_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+
+#define TIM_DCR_DBL ((uint32_t)0x00001F00) /*!<DBL[4:0] bits (DMA Burst Length) */
+#define TIM_DCR_DBL_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_DCR_DBL_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define TIM_DCR_DBL_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define TIM_DCR_DBL_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define TIM_DCR_DBL_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+
+/******************* Bit definition for TIM_DMAR register ******************/
+#define TIM_DMAR_DMAB ((uint32_t)0x0000FFFF) /*!<DMA register for burst accesses */
+
+/******************* Bit definition for TIM14_OR register ********************/
+#define TIM14_OR_TI1_RMP ((uint32_t)0x00000003) /*!<TI1_RMP[1:0] bits (TIM14 Input 4 remap) */
+#define TIM14_OR_TI1_RMP_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM14_OR_TI1_RMP_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+/******************************************************************************/
+/* */
+/* Touch Sensing Controller (TSC) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for TSC_CR register *********************/
+#define TSC_CR_TSCE ((uint32_t)0x00000001) /*!<Touch sensing controller enable */
+#define TSC_CR_START ((uint32_t)0x00000002) /*!<Start acquisition */
+#define TSC_CR_AM ((uint32_t)0x00000004) /*!<Acquisition mode */
+#define TSC_CR_SYNCPOL ((uint32_t)0x00000008) /*!<Synchronization pin polarity */
+#define TSC_CR_IODEF ((uint32_t)0x00000010) /*!<IO default mode */
+
+#define TSC_CR_MCV ((uint32_t)0x000000E0) /*!<MCV[2:0] bits (Max Count Value) */
+#define TSC_CR_MCV_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define TSC_CR_MCV_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+#define TSC_CR_MCV_2 ((uint32_t)0x00000080) /*!<Bit 2 */
+
+#define TSC_CR_PGPSC ((uint32_t)0x00007000) /*!<PGPSC[2:0] bits (Pulse Generator Prescaler) */
+#define TSC_CR_PGPSC_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TSC_CR_PGPSC_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TSC_CR_PGPSC_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+
+#define TSC_CR_SSPSC ((uint32_t)0x00008000) /*!<Spread Spectrum Prescaler */
+#define TSC_CR_SSE ((uint32_t)0x00010000) /*!<Spread Spectrum Enable */
+
+#define TSC_CR_SSD ((uint32_t)0x00FE0000) /*!<SSD[6:0] bits (Spread Spectrum Deviation) */
+#define TSC_CR_SSD_0 ((uint32_t)0x00020000) /*!<Bit 0 */
+#define TSC_CR_SSD_1 ((uint32_t)0x00040000) /*!<Bit 1 */
+#define TSC_CR_SSD_2 ((uint32_t)0x00080000) /*!<Bit 2 */
+#define TSC_CR_SSD_3 ((uint32_t)0x00100000) /*!<Bit 3 */
+#define TSC_CR_SSD_4 ((uint32_t)0x00200000) /*!<Bit 4 */
+#define TSC_CR_SSD_5 ((uint32_t)0x00400000) /*!<Bit 5 */
+#define TSC_CR_SSD_6 ((uint32_t)0x00800000) /*!<Bit 6 */
+
+#define TSC_CR_CTPL ((uint32_t)0x0F000000) /*!<CTPL[3:0] bits (Charge Transfer pulse low) */
+#define TSC_CR_CTPL_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define TSC_CR_CTPL_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define TSC_CR_CTPL_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define TSC_CR_CTPL_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+
+#define TSC_CR_CTPH ((uint32_t)0xF0000000) /*!<CTPH[3:0] bits (Charge Transfer pulse high) */
+#define TSC_CR_CTPH_0 ((uint32_t)0x10000000) /*!<Bit 0 */
+#define TSC_CR_CTPH_1 ((uint32_t)0x20000000) /*!<Bit 1 */
+#define TSC_CR_CTPH_2 ((uint32_t)0x40000000) /*!<Bit 2 */
+#define TSC_CR_CTPH_3 ((uint32_t)0x80000000) /*!<Bit 3 */
+
+/******************* Bit definition for TSC_IER register ********************/
+#define TSC_IER_EOAIE ((uint32_t)0x00000001) /*!<End of acquisition interrupt enable */
+#define TSC_IER_MCEIE ((uint32_t)0x00000002) /*!<Max count error interrupt enable */
+
+/******************* Bit definition for TSC_ICR register ********************/
+#define TSC_ICR_EOAIC ((uint32_t)0x00000001) /*!<End of acquisition interrupt clear */
+#define TSC_ICR_MCEIC ((uint32_t)0x00000002) /*!<Max count error interrupt clear */
+
+/******************* Bit definition for TSC_ISR register ********************/
+#define TSC_ISR_EOAF ((uint32_t)0x00000001) /*!<End of acquisition flag */
+#define TSC_ISR_MCEF ((uint32_t)0x00000002) /*!<Max count error flag */
+
+/******************* Bit definition for TSC_IOHCR register ******************/
+#define TSC_IOHCR_G1_IO1 ((uint32_t)0x00000001) /*!<GROUP1_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G1_IO2 ((uint32_t)0x00000002) /*!<GROUP1_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G1_IO3 ((uint32_t)0x00000004) /*!<GROUP1_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G1_IO4 ((uint32_t)0x00000008) /*!<GROUP1_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G2_IO1 ((uint32_t)0x00000010) /*!<GROUP2_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G2_IO2 ((uint32_t)0x00000020) /*!<GROUP2_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G2_IO3 ((uint32_t)0x00000040) /*!<GROUP2_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G2_IO4 ((uint32_t)0x00000080) /*!<GROUP2_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G3_IO1 ((uint32_t)0x00000100) /*!<GROUP3_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G3_IO2 ((uint32_t)0x00000200) /*!<GROUP3_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G3_IO3 ((uint32_t)0x00000400) /*!<GROUP3_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G3_IO4 ((uint32_t)0x00000800) /*!<GROUP3_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G4_IO1 ((uint32_t)0x00001000) /*!<GROUP4_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G4_IO2 ((uint32_t)0x00002000) /*!<GROUP4_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G4_IO3 ((uint32_t)0x00004000) /*!<GROUP4_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G4_IO4 ((uint32_t)0x00008000) /*!<GROUP4_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G5_IO1 ((uint32_t)0x00010000) /*!<GROUP5_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G5_IO2 ((uint32_t)0x00020000) /*!<GROUP5_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G5_IO3 ((uint32_t)0x00040000) /*!<GROUP5_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G5_IO4 ((uint32_t)0x00080000) /*!<GROUP5_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G6_IO1 ((uint32_t)0x00100000) /*!<GROUP6_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G6_IO2 ((uint32_t)0x00200000) /*!<GROUP6_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G6_IO3 ((uint32_t)0x00400000) /*!<GROUP6_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G6_IO4 ((uint32_t)0x00800000) /*!<GROUP6_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G7_IO1 ((uint32_t)0x01000000) /*!<GROUP7_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G7_IO2 ((uint32_t)0x02000000) /*!<GROUP7_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G7_IO3 ((uint32_t)0x04000000) /*!<GROUP7_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G7_IO4 ((uint32_t)0x08000000) /*!<GROUP7_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G8_IO1 ((uint32_t)0x10000000) /*!<GROUP8_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G8_IO2 ((uint32_t)0x20000000) /*!<GROUP8_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G8_IO3 ((uint32_t)0x40000000) /*!<GROUP8_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G8_IO4 ((uint32_t)0x80000000) /*!<GROUP8_IO4 schmitt trigger hysteresis mode */
+
+/******************* Bit definition for TSC_IOASCR register *****************/
+#define TSC_IOASCR_G1_IO1 ((uint32_t)0x00000001) /*!<GROUP1_IO1 analog switch enable */
+#define TSC_IOASCR_G1_IO2 ((uint32_t)0x00000002) /*!<GROUP1_IO2 analog switch enable */
+#define TSC_IOASCR_G1_IO3 ((uint32_t)0x00000004) /*!<GROUP1_IO3 analog switch enable */
+#define TSC_IOASCR_G1_IO4 ((uint32_t)0x00000008) /*!<GROUP1_IO4 analog switch enable */
+#define TSC_IOASCR_G2_IO1 ((uint32_t)0x00000010) /*!<GROUP2_IO1 analog switch enable */
+#define TSC_IOASCR_G2_IO2 ((uint32_t)0x00000020) /*!<GROUP2_IO2 analog switch enable */
+#define TSC_IOASCR_G2_IO3 ((uint32_t)0x00000040) /*!<GROUP2_IO3 analog switch enable */
+#define TSC_IOASCR_G2_IO4 ((uint32_t)0x00000080) /*!<GROUP2_IO4 analog switch enable */
+#define TSC_IOASCR_G3_IO1 ((uint32_t)0x00000100) /*!<GROUP3_IO1 analog switch enable */
+#define TSC_IOASCR_G3_IO2 ((uint32_t)0x00000200) /*!<GROUP3_IO2 analog switch enable */
+#define TSC_IOASCR_G3_IO3 ((uint32_t)0x00000400) /*!<GROUP3_IO3 analog switch enable */
+#define TSC_IOASCR_G3_IO4 ((uint32_t)0x00000800) /*!<GROUP3_IO4 analog switch enable */
+#define TSC_IOASCR_G4_IO1 ((uint32_t)0x00001000) /*!<GROUP4_IO1 analog switch enable */
+#define TSC_IOASCR_G4_IO2 ((uint32_t)0x00002000) /*!<GROUP4_IO2 analog switch enable */
+#define TSC_IOASCR_G4_IO3 ((uint32_t)0x00004000) /*!<GROUP4_IO3 analog switch enable */
+#define TSC_IOASCR_G4_IO4 ((uint32_t)0x00008000) /*!<GROUP4_IO4 analog switch enable */
+#define TSC_IOASCR_G5_IO1 ((uint32_t)0x00010000) /*!<GROUP5_IO1 analog switch enable */
+#define TSC_IOASCR_G5_IO2 ((uint32_t)0x00020000) /*!<GROUP5_IO2 analog switch enable */
+#define TSC_IOASCR_G5_IO3 ((uint32_t)0x00040000) /*!<GROUP5_IO3 analog switch enable */
+#define TSC_IOASCR_G5_IO4 ((uint32_t)0x00080000) /*!<GROUP5_IO4 analog switch enable */
+#define TSC_IOASCR_G6_IO1 ((uint32_t)0x00100000) /*!<GROUP6_IO1 analog switch enable */
+#define TSC_IOASCR_G6_IO2 ((uint32_t)0x00200000) /*!<GROUP6_IO2 analog switch enable */
+#define TSC_IOASCR_G6_IO3 ((uint32_t)0x00400000) /*!<GROUP6_IO3 analog switch enable */
+#define TSC_IOASCR_G6_IO4 ((uint32_t)0x00800000) /*!<GROUP6_IO4 analog switch enable */
+#define TSC_IOASCR_G7_IO1 ((uint32_t)0x01000000) /*!<GROUP7_IO1 analog switch enable */
+#define TSC_IOASCR_G7_IO2 ((uint32_t)0x02000000) /*!<GROUP7_IO2 analog switch enable */
+#define TSC_IOASCR_G7_IO3 ((uint32_t)0x04000000) /*!<GROUP7_IO3 analog switch enable */
+#define TSC_IOASCR_G7_IO4 ((uint32_t)0x08000000) /*!<GROUP7_IO4 analog switch enable */
+#define TSC_IOASCR_G8_IO1 ((uint32_t)0x10000000) /*!<GROUP8_IO1 analog switch enable */
+#define TSC_IOASCR_G8_IO2 ((uint32_t)0x20000000) /*!<GROUP8_IO2 analog switch enable */
+#define TSC_IOASCR_G8_IO3 ((uint32_t)0x40000000) /*!<GROUP8_IO3 analog switch enable */
+#define TSC_IOASCR_G8_IO4 ((uint32_t)0x80000000) /*!<GROUP8_IO4 analog switch enable */
+
+/******************* Bit definition for TSC_IOSCR register ******************/
+#define TSC_IOSCR_G1_IO1 ((uint32_t)0x00000001) /*!<GROUP1_IO1 sampling mode */
+#define TSC_IOSCR_G1_IO2 ((uint32_t)0x00000002) /*!<GROUP1_IO2 sampling mode */
+#define TSC_IOSCR_G1_IO3 ((uint32_t)0x00000004) /*!<GROUP1_IO3 sampling mode */
+#define TSC_IOSCR_G1_IO4 ((uint32_t)0x00000008) /*!<GROUP1_IO4 sampling mode */
+#define TSC_IOSCR_G2_IO1 ((uint32_t)0x00000010) /*!<GROUP2_IO1 sampling mode */
+#define TSC_IOSCR_G2_IO2 ((uint32_t)0x00000020) /*!<GROUP2_IO2 sampling mode */
+#define TSC_IOSCR_G2_IO3 ((uint32_t)0x00000040) /*!<GROUP2_IO3 sampling mode */
+#define TSC_IOSCR_G2_IO4 ((uint32_t)0x00000080) /*!<GROUP2_IO4 sampling mode */
+#define TSC_IOSCR_G3_IO1 ((uint32_t)0x00000100) /*!<GROUP3_IO1 sampling mode */
+#define TSC_IOSCR_G3_IO2 ((uint32_t)0x00000200) /*!<GROUP3_IO2 sampling mode */
+#define TSC_IOSCR_G3_IO3 ((uint32_t)0x00000400) /*!<GROUP3_IO3 sampling mode */
+#define TSC_IOSCR_G3_IO4 ((uint32_t)0x00000800) /*!<GROUP3_IO4 sampling mode */
+#define TSC_IOSCR_G4_IO1 ((uint32_t)0x00001000) /*!<GROUP4_IO1 sampling mode */
+#define TSC_IOSCR_G4_IO2 ((uint32_t)0x00002000) /*!<GROUP4_IO2 sampling mode */
+#define TSC_IOSCR_G4_IO3 ((uint32_t)0x00004000) /*!<GROUP4_IO3 sampling mode */
+#define TSC_IOSCR_G4_IO4 ((uint32_t)0x00008000) /*!<GROUP4_IO4 sampling mode */
+#define TSC_IOSCR_G5_IO1 ((uint32_t)0x00010000) /*!<GROUP5_IO1 sampling mode */
+#define TSC_IOSCR_G5_IO2 ((uint32_t)0x00020000) /*!<GROUP5_IO2 sampling mode */
+#define TSC_IOSCR_G5_IO3 ((uint32_t)0x00040000) /*!<GROUP5_IO3 sampling mode */
+#define TSC_IOSCR_G5_IO4 ((uint32_t)0x00080000) /*!<GROUP5_IO4 sampling mode */
+#define TSC_IOSCR_G6_IO1 ((uint32_t)0x00100000) /*!<GROUP6_IO1 sampling mode */
+#define TSC_IOSCR_G6_IO2 ((uint32_t)0x00200000) /*!<GROUP6_IO2 sampling mode */
+#define TSC_IOSCR_G6_IO3 ((uint32_t)0x00400000) /*!<GROUP6_IO3 sampling mode */
+#define TSC_IOSCR_G6_IO4 ((uint32_t)0x00800000) /*!<GROUP6_IO4 sampling mode */
+#define TSC_IOSCR_G7_IO1 ((uint32_t)0x01000000) /*!<GROUP7_IO1 sampling mode */
+#define TSC_IOSCR_G7_IO2 ((uint32_t)0x02000000) /*!<GROUP7_IO2 sampling mode */
+#define TSC_IOSCR_G7_IO3 ((uint32_t)0x04000000) /*!<GROUP7_IO3 sampling mode */
+#define TSC_IOSCR_G7_IO4 ((uint32_t)0x08000000) /*!<GROUP7_IO4 sampling mode */
+#define TSC_IOSCR_G8_IO1 ((uint32_t)0x10000000) /*!<GROUP8_IO1 sampling mode */
+#define TSC_IOSCR_G8_IO2 ((uint32_t)0x20000000) /*!<GROUP8_IO2 sampling mode */
+#define TSC_IOSCR_G8_IO3 ((uint32_t)0x40000000) /*!<GROUP8_IO3 sampling mode */
+#define TSC_IOSCR_G8_IO4 ((uint32_t)0x80000000) /*!<GROUP8_IO4 sampling mode */
+
+/******************* Bit definition for TSC_IOCCR register ******************/
+#define TSC_IOCCR_G1_IO1 ((uint32_t)0x00000001) /*!<GROUP1_IO1 channel mode */
+#define TSC_IOCCR_G1_IO2 ((uint32_t)0x00000002) /*!<GROUP1_IO2 channel mode */
+#define TSC_IOCCR_G1_IO3 ((uint32_t)0x00000004) /*!<GROUP1_IO3 channel mode */
+#define TSC_IOCCR_G1_IO4 ((uint32_t)0x00000008) /*!<GROUP1_IO4 channel mode */
+#define TSC_IOCCR_G2_IO1 ((uint32_t)0x00000010) /*!<GROUP2_IO1 channel mode */
+#define TSC_IOCCR_G2_IO2 ((uint32_t)0x00000020) /*!<GROUP2_IO2 channel mode */
+#define TSC_IOCCR_G2_IO3 ((uint32_t)0x00000040) /*!<GROUP2_IO3 channel mode */
+#define TSC_IOCCR_G2_IO4 ((uint32_t)0x00000080) /*!<GROUP2_IO4 channel mode */
+#define TSC_IOCCR_G3_IO1 ((uint32_t)0x00000100) /*!<GROUP3_IO1 channel mode */
+#define TSC_IOCCR_G3_IO2 ((uint32_t)0x00000200) /*!<GROUP3_IO2 channel mode */
+#define TSC_IOCCR_G3_IO3 ((uint32_t)0x00000400) /*!<GROUP3_IO3 channel mode */
+#define TSC_IOCCR_G3_IO4 ((uint32_t)0x00000800) /*!<GROUP3_IO4 channel mode */
+#define TSC_IOCCR_G4_IO1 ((uint32_t)0x00001000) /*!<GROUP4_IO1 channel mode */
+#define TSC_IOCCR_G4_IO2 ((uint32_t)0x00002000) /*!<GROUP4_IO2 channel mode */
+#define TSC_IOCCR_G4_IO3 ((uint32_t)0x00004000) /*!<GROUP4_IO3 channel mode */
+#define TSC_IOCCR_G4_IO4 ((uint32_t)0x00008000) /*!<GROUP4_IO4 channel mode */
+#define TSC_IOCCR_G5_IO1 ((uint32_t)0x00010000) /*!<GROUP5_IO1 channel mode */
+#define TSC_IOCCR_G5_IO2 ((uint32_t)0x00020000) /*!<GROUP5_IO2 channel mode */
+#define TSC_IOCCR_G5_IO3 ((uint32_t)0x00040000) /*!<GROUP5_IO3 channel mode */
+#define TSC_IOCCR_G5_IO4 ((uint32_t)0x00080000) /*!<GROUP5_IO4 channel mode */
+#define TSC_IOCCR_G6_IO1 ((uint32_t)0x00100000) /*!<GROUP6_IO1 channel mode */
+#define TSC_IOCCR_G6_IO2 ((uint32_t)0x00200000) /*!<GROUP6_IO2 channel mode */
+#define TSC_IOCCR_G6_IO3 ((uint32_t)0x00400000) /*!<GROUP6_IO3 channel mode */
+#define TSC_IOCCR_G6_IO4 ((uint32_t)0x00800000) /*!<GROUP6_IO4 channel mode */
+#define TSC_IOCCR_G7_IO1 ((uint32_t)0x01000000) /*!<GROUP7_IO1 channel mode */
+#define TSC_IOCCR_G7_IO2 ((uint32_t)0x02000000) /*!<GROUP7_IO2 channel mode */
+#define TSC_IOCCR_G7_IO3 ((uint32_t)0x04000000) /*!<GROUP7_IO3 channel mode */
+#define TSC_IOCCR_G7_IO4 ((uint32_t)0x08000000) /*!<GROUP7_IO4 channel mode */
+#define TSC_IOCCR_G8_IO1 ((uint32_t)0x10000000) /*!<GROUP8_IO1 channel mode */
+#define TSC_IOCCR_G8_IO2 ((uint32_t)0x20000000) /*!<GROUP8_IO2 channel mode */
+#define TSC_IOCCR_G8_IO3 ((uint32_t)0x40000000) /*!<GROUP8_IO3 channel mode */
+#define TSC_IOCCR_G8_IO4 ((uint32_t)0x80000000) /*!<GROUP8_IO4 channel mode */
+
+/******************* Bit definition for TSC_IOGCSR register *****************/
+#define TSC_IOGCSR_G1E ((uint32_t)0x00000001) /*!<Analog IO GROUP1 enable */
+#define TSC_IOGCSR_G2E ((uint32_t)0x00000002) /*!<Analog IO GROUP2 enable */
+#define TSC_IOGCSR_G3E ((uint32_t)0x00000004) /*!<Analog IO GROUP3 enable */
+#define TSC_IOGCSR_G4E ((uint32_t)0x00000008) /*!<Analog IO GROUP4 enable */
+#define TSC_IOGCSR_G5E ((uint32_t)0x00000010) /*!<Analog IO GROUP5 enable */
+#define TSC_IOGCSR_G6E ((uint32_t)0x00000020) /*!<Analog IO GROUP6 enable */
+#define TSC_IOGCSR_G7E ((uint32_t)0x00000040) /*!<Analog IO GROUP7 enable */
+#define TSC_IOGCSR_G8E ((uint32_t)0x00000080) /*!<Analog IO GROUP8 enable */
+#define TSC_IOGCSR_G1S ((uint32_t)0x00010000) /*!<Analog IO GROUP1 status */
+#define TSC_IOGCSR_G2S ((uint32_t)0x00020000) /*!<Analog IO GROUP2 status */
+#define TSC_IOGCSR_G3S ((uint32_t)0x00040000) /*!<Analog IO GROUP3 status */
+#define TSC_IOGCSR_G4S ((uint32_t)0x00080000) /*!<Analog IO GROUP4 status */
+#define TSC_IOGCSR_G5S ((uint32_t)0x00100000) /*!<Analog IO GROUP5 status */
+#define TSC_IOGCSR_G6S ((uint32_t)0x00200000) /*!<Analog IO GROUP6 status */
+#define TSC_IOGCSR_G7S ((uint32_t)0x00400000) /*!<Analog IO GROUP7 status */
+#define TSC_IOGCSR_G8S ((uint32_t)0x00800000) /*!<Analog IO GROUP8 status */
+
+/******************* Bit definition for TSC_IOGXCR register *****************/
+#define TSC_IOGXCR_CNT ((uint32_t)0x00003FFF) /*!<CNT[13:0] bits (Counter value) */
+
+/******************************************************************************/
+/* */
+/* Universal Synchronous Asynchronous Receiver Transmitter (USART) */
+/* */
+/******************************************************************************/
+/****************** Bit definition for USART_CR1 register *******************/
+#define USART_CR1_UE ((uint32_t)0x00000001) /*!< USART Enable */
+#define USART_CR1_UESM ((uint32_t)0x00000002) /*!< USART Enable in STOP Mode */
+#define USART_CR1_RE ((uint32_t)0x00000004) /*!< Receiver Enable */
+#define USART_CR1_TE ((uint32_t)0x00000008) /*!< Transmitter Enable */
+#define USART_CR1_IDLEIE ((uint32_t)0x00000010) /*!< IDLE Interrupt Enable */
+#define USART_CR1_RXNEIE ((uint32_t)0x00000020) /*!< RXNE Interrupt Enable */
+#define USART_CR1_TCIE ((uint32_t)0x00000040) /*!< Transmission Complete Interrupt Enable */
+#define USART_CR1_TXEIE ((uint32_t)0x00000080) /*!< TXE Interrupt Enable */
+#define USART_CR1_PEIE ((uint32_t)0x00000100) /*!< PE Interrupt Enable */
+#define USART_CR1_PS ((uint32_t)0x00000200) /*!< Parity Selection */
+#define USART_CR1_PCE ((uint32_t)0x00000400) /*!< Parity Control Enable */
+#define USART_CR1_WAKE ((uint32_t)0x00000800) /*!< Receiver Wakeup method */
+#define USART_CR1_M0 ((uint32_t)0x00001000) /*!< Word length bit 0 */
+#define USART_CR1_MME ((uint32_t)0x00002000) /*!< Mute Mode Enable */
+#define USART_CR1_CMIE ((uint32_t)0x00004000) /*!< Character match interrupt enable */
+#define USART_CR1_OVER8 ((uint32_t)0x00008000) /*!< Oversampling by 8-bit or 16-bit mode */
+#define USART_CR1_DEDT ((uint32_t)0x001F0000) /*!< DEDT[4:0] bits (Driver Enable Deassertion Time) */
+#define USART_CR1_DEDT_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define USART_CR1_DEDT_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define USART_CR1_DEDT_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define USART_CR1_DEDT_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+#define USART_CR1_DEDT_4 ((uint32_t)0x00100000) /*!< Bit 4 */
+#define USART_CR1_DEAT ((uint32_t)0x03E00000) /*!< DEAT[4:0] bits (Driver Enable Assertion Time) */
+#define USART_CR1_DEAT_0 ((uint32_t)0x00200000) /*!< Bit 0 */
+#define USART_CR1_DEAT_1 ((uint32_t)0x00400000) /*!< Bit 1 */
+#define USART_CR1_DEAT_2 ((uint32_t)0x00800000) /*!< Bit 2 */
+#define USART_CR1_DEAT_3 ((uint32_t)0x01000000) /*!< Bit 3 */
+#define USART_CR1_DEAT_4 ((uint32_t)0x02000000) /*!< Bit 4 */
+#define USART_CR1_RTOIE ((uint32_t)0x04000000) /*!< Receive Time Out interrupt enable */
+#define USART_CR1_EOBIE ((uint32_t)0x08000000) /*!< End of Block interrupt enable */
+#define USART_CR1_M1 ((uint32_t)0x10000000) /*!< Word length bit 1 */
+#define USART_CR1_M ((uint32_t)0x10001000) /*!< [M1:M0] Word length */
+
+/****************** Bit definition for USART_CR2 register *******************/
+#define USART_CR2_ADDM7 ((uint32_t)0x00000010) /*!< 7-bit or 4-bit Address Detection */
+#define USART_CR2_LBDL ((uint32_t)0x00000020) /*!< LIN Break Detection Length */
+#define USART_CR2_LBDIE ((uint32_t)0x00000040) /*!< LIN Break Detection Interrupt Enable */
+#define USART_CR2_LBCL ((uint32_t)0x00000100) /*!< Last Bit Clock pulse */
+#define USART_CR2_CPHA ((uint32_t)0x00000200) /*!< Clock Phase */
+#define USART_CR2_CPOL ((uint32_t)0x00000400) /*!< Clock Polarity */
+#define USART_CR2_CLKEN ((uint32_t)0x00000800) /*!< Clock Enable */
+#define USART_CR2_STOP ((uint32_t)0x00003000) /*!< STOP[1:0] bits (STOP bits) */
+#define USART_CR2_STOP_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define USART_CR2_STOP_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+#define USART_CR2_LINEN ((uint32_t)0x00004000) /*!< LIN mode enable */
+#define USART_CR2_SWAP ((uint32_t)0x00008000) /*!< SWAP TX/RX pins */
+#define USART_CR2_RXINV ((uint32_t)0x00010000) /*!< RX pin active level inversion */
+#define USART_CR2_TXINV ((uint32_t)0x00020000) /*!< TX pin active level inversion */
+#define USART_CR2_DATAINV ((uint32_t)0x00040000) /*!< Binary data inversion */
+#define USART_CR2_MSBFIRST ((uint32_t)0x00080000) /*!< Most Significant Bit First */
+#define USART_CR2_ABREN ((uint32_t)0x00100000) /*!< Auto Baud-Rate Enable*/
+#define USART_CR2_ABRMODE ((uint32_t)0x00600000) /*!< ABRMOD[1:0] bits (Auto Baud-Rate Mode) */
+#define USART_CR2_ABRMODE_0 ((uint32_t)0x00200000) /*!< Bit 0 */
+#define USART_CR2_ABRMODE_1 ((uint32_t)0x00400000) /*!< Bit 1 */
+#define USART_CR2_RTOEN ((uint32_t)0x00800000) /*!< Receiver Time-Out enable */
+#define USART_CR2_ADD ((uint32_t)0xFF000000) /*!< Address of the USART node */
+
+/****************** Bit definition for USART_CR3 register *******************/
+#define USART_CR3_EIE ((uint32_t)0x00000001) /*!< Error Interrupt Enable */
+#define USART_CR3_IREN ((uint32_t)0x00000002) /*!< IrDA mode Enable */
+#define USART_CR3_IRLP ((uint32_t)0x00000004) /*!< IrDA Low-Power */
+#define USART_CR3_HDSEL ((uint32_t)0x00000008) /*!< Half-Duplex Selection */
+#define USART_CR3_NACK ((uint32_t)0x00000010) /*!< SmartCard NACK enable */
+#define USART_CR3_SCEN ((uint32_t)0x00000020) /*!< SmartCard mode enable */
+#define USART_CR3_DMAR ((uint32_t)0x00000040) /*!< DMA Enable Receiver */
+#define USART_CR3_DMAT ((uint32_t)0x00000080) /*!< DMA Enable Transmitter */
+#define USART_CR3_RTSE ((uint32_t)0x00000100) /*!< RTS Enable */
+#define USART_CR3_CTSE ((uint32_t)0x00000200) /*!< CTS Enable */
+#define USART_CR3_CTSIE ((uint32_t)0x00000400) /*!< CTS Interrupt Enable */
+#define USART_CR3_ONEBIT ((uint32_t)0x00000800) /*!< One sample bit method enable */
+#define USART_CR3_OVRDIS ((uint32_t)0x00001000) /*!< Overrun Disable */
+#define USART_CR3_DDRE ((uint32_t)0x00002000) /*!< DMA Disable on Reception Error */
+#define USART_CR3_DEM ((uint32_t)0x00004000) /*!< Driver Enable Mode */
+#define USART_CR3_DEP ((uint32_t)0x00008000) /*!< Driver Enable Polarity Selection */
+#define USART_CR3_SCARCNT ((uint32_t)0x000E0000) /*!< SCARCNT[2:0] bits (SmartCard Auto-Retry Count) */
+#define USART_CR3_SCARCNT_0 ((uint32_t)0x00020000) /*!< Bit 0 */
+#define USART_CR3_SCARCNT_1 ((uint32_t)0x00040000) /*!< Bit 1 */
+#define USART_CR3_SCARCNT_2 ((uint32_t)0x00080000) /*!< Bit 2 */
+#define USART_CR3_WUS ((uint32_t)0x00300000) /*!< WUS[1:0] bits (Wake UP Interrupt Flag Selection) */
+#define USART_CR3_WUS_0 ((uint32_t)0x00100000) /*!< Bit 0 */
+#define USART_CR3_WUS_1 ((uint32_t)0x00200000) /*!< Bit 1 */
+#define USART_CR3_WUFIE ((uint32_t)0x00400000) /*!< Wake Up Interrupt Enable */
+
+/****************** Bit definition for USART_BRR register *******************/
+#define USART_BRR_DIV_FRACTION ((uint32_t)0x0000000F) /*!< Fraction of USARTDIV */
+#define USART_BRR_DIV_MANTISSA ((uint32_t)0x0000FFF0) /*!< Mantissa of USARTDIV */
+
+/****************** Bit definition for USART_GTPR register ******************/
+#define USART_GTPR_PSC ((uint32_t)0x000000FF) /*!< PSC[7:0] bits (Prescaler value) */
+#define USART_GTPR_GT ((uint32_t)0x0000FF00) /*!< GT[7:0] bits (Guard time value) */
+
+
+/******************* Bit definition for USART_RTOR register *****************/
+#define USART_RTOR_RTO ((uint32_t)0x00FFFFFF) /*!< Receiver Time Out Value */
+#define USART_RTOR_BLEN ((uint32_t)0xFF000000) /*!< Block Length */
+
+/******************* Bit definition for USART_RQR register ******************/
+#define USART_RQR_ABRRQ ((uint32_t)0x00000001) /*!< Auto-Baud Rate Request */
+#define USART_RQR_SBKRQ ((uint32_t)0x00000002) /*!< Send Break Request */
+#define USART_RQR_MMRQ ((uint32_t)0x00000004) /*!< Mute Mode Request */
+#define USART_RQR_RXFRQ ((uint32_t)0x00000008) /*!< Receive Data flush Request */
+#define USART_RQR_TXFRQ ((uint32_t)0x00000010) /*!< Transmit data flush Request */
+
+/******************* Bit definition for USART_ISR register ******************/
+#define USART_ISR_PE ((uint32_t)0x00000001) /*!< Parity Error */
+#define USART_ISR_FE ((uint32_t)0x00000002) /*!< Framing Error */
+#define USART_ISR_NE ((uint32_t)0x00000004) /*!< Noise detected Flag */
+#define USART_ISR_ORE ((uint32_t)0x00000008) /*!< OverRun Error */
+#define USART_ISR_IDLE ((uint32_t)0x00000010) /*!< IDLE line detected */
+#define USART_ISR_RXNE ((uint32_t)0x00000020) /*!< Read Data Register Not Empty */
+#define USART_ISR_TC ((uint32_t)0x00000040) /*!< Transmission Complete */
+#define USART_ISR_TXE ((uint32_t)0x00000080) /*!< Transmit Data Register Empty */
+#define USART_ISR_LBDF ((uint32_t)0x00000100) /*!< LIN Break Detection Flag */
+#define USART_ISR_CTSIF ((uint32_t)0x00000200) /*!< CTS interrupt flag */
+#define USART_ISR_CTS ((uint32_t)0x00000400) /*!< CTS flag */
+#define USART_ISR_RTOF ((uint32_t)0x00000800) /*!< Receiver Time Out */
+#define USART_ISR_EOBF ((uint32_t)0x00001000) /*!< End Of Block Flag */
+#define USART_ISR_ABRE ((uint32_t)0x00004000) /*!< Auto-Baud Rate Error */
+#define USART_ISR_ABRF ((uint32_t)0x00008000) /*!< Auto-Baud Rate Flag */
+#define USART_ISR_BUSY ((uint32_t)0x00010000) /*!< Busy Flag */
+#define USART_ISR_CMF ((uint32_t)0x00020000) /*!< Character Match Flag */
+#define USART_ISR_SBKF ((uint32_t)0x00040000) /*!< Send Break Flag */
+#define USART_ISR_RWU ((uint32_t)0x00080000) /*!< Receive Wake Up from mute mode Flag */
+#define USART_ISR_WUF ((uint32_t)0x00100000) /*!< Wake Up from stop mode Flag */
+#define USART_ISR_TEACK ((uint32_t)0x00200000) /*!< Transmit Enable Acknowledge Flag */
+#define USART_ISR_REACK ((uint32_t)0x00400000) /*!< Receive Enable Acknowledge Flag */
+
+/******************* Bit definition for USART_ICR register ******************/
+#define USART_ICR_PECF ((uint32_t)0x00000001) /*!< Parity Error Clear Flag */
+#define USART_ICR_FECF ((uint32_t)0x00000002) /*!< Framing Error Clear Flag */
+#define USART_ICR_NCF ((uint32_t)0x00000004) /*!< Noise detected Clear Flag */
+#define USART_ICR_ORECF ((uint32_t)0x00000008) /*!< OverRun Error Clear Flag */
+#define USART_ICR_IDLECF ((uint32_t)0x00000010) /*!< IDLE line detected Clear Flag */
+#define USART_ICR_TCCF ((uint32_t)0x00000040) /*!< Transmission Complete Clear Flag */
+#define USART_ICR_LBDCF ((uint32_t)0x00000100) /*!< LIN Break Detection Clear Flag */
+#define USART_ICR_CTSCF ((uint32_t)0x00000200) /*!< CTS Interrupt Clear Flag */
+#define USART_ICR_RTOCF ((uint32_t)0x00000800) /*!< Receiver Time Out Clear Flag */
+#define USART_ICR_EOBCF ((uint32_t)0x00001000) /*!< End Of Block Clear Flag */
+#define USART_ICR_CMCF ((uint32_t)0x00020000) /*!< Character Match Clear Flag */
+#define USART_ICR_WUCF ((uint32_t)0x00100000) /*!< Wake Up from stop mode Clear Flag */
+
+/******************* Bit definition for USART_RDR register ******************/
+#define USART_RDR_RDR ((uint16_t)0x01FF) /*!< RDR[8:0] bits (Receive Data value) */
+
+/******************* Bit definition for USART_TDR register ******************/
+#define USART_TDR_TDR ((uint16_t)0x01FF) /*!< TDR[8:0] bits (Transmit Data value) */
+
+/******************************************************************************/
+/* */
+/* USB Device General registers */
+/* */
+/******************************************************************************/
+#define USB_CNTR (USB_BASE + 0x40) /*!< Control register */
+#define USB_ISTR (USB_BASE + 0x44) /*!< Interrupt status register */
+#define USB_FNR (USB_BASE + 0x48) /*!< Frame number register */
+#define USB_DADDR (USB_BASE + 0x4C) /*!< Device address register */
+#define USB_BTABLE (USB_BASE + 0x50) /*!< Buffer Table address register */
+#define USB_LPMCSR (USB_BASE + 0x54) /*!< LPM Control and Status register */
+#define USB_BCDR (USB_BASE + 0x58) /*!< Battery Charging detector register*/
+
+/**************************** ISTR interrupt events *************************/
+#define USB_ISTR_CTR ((uint16_t)0x8000) /*!< Correct TRansfer (clear-only bit) */
+#define USB_ISTR_PMAOVR ((uint16_t)0x4000) /*!< DMA OVeR/underrun (clear-only bit) */
+#define USB_ISTR_ERR ((uint16_t)0x2000) /*!< ERRor (clear-only bit) */
+#define USB_ISTR_WKUP ((uint16_t)0x1000) /*!< WaKe UP (clear-only bit) */
+#define USB_ISTR_SUSP ((uint16_t)0x0800) /*!< SUSPend (clear-only bit) */
+#define USB_ISTR_RESET ((uint16_t)0x0400) /*!< RESET (clear-only bit) */
+#define USB_ISTR_SOF ((uint16_t)0x0200) /*!< Start Of Frame (clear-only bit) */
+#define USB_ISTR_ESOF ((uint16_t)0x0100) /*!< Expected Start Of Frame (clear-only bit) */
+#define USB_ISTR_L1REQ ((uint16_t)0x0080) /*!< LPM L1 state request */
+#define USB_ISTR_DIR ((uint16_t)0x0010) /*!< DIRection of transaction (read-only bit) */
+#define USB_ISTR_EP_ID ((uint16_t)0x000F) /*!< EndPoint IDentifier (read-only bit) */
+
+#define USB_CLR_CTR (~USB_ISTR_CTR) /*!< clear Correct TRansfer bit */
+#define USB_CLR_PMAOVR (~USB_ISTR_PMAOVR) /*!< clear DMA OVeR/underrun bit*/
+#define USB_CLR_ERR (~USB_ISTR_ERR) /*!< clear ERRor bit */
+#define USB_CLR_WKUP (~USB_ISTR_WKUP) /*!< clear WaKe UP bit */
+#define USB_CLR_SUSP (~USB_ISTR_SUSP) /*!< clear SUSPend bit */
+#define USB_CLR_RESET (~USB_ISTR_RESET) /*!< clear RESET bit */
+#define USB_CLR_SOF (~USB_ISTR_SOF) /*!< clear Start Of Frame bit */
+#define USB_CLR_ESOF (~USB_ISTR_ESOF) /*!< clear Expected Start Of Frame bit */
+#define USB_CLR_L1REQ (~USB_ISTR_L1REQ) /*!< clear LPM L1 bit */
+
+/************************* CNTR control register bits definitions ***********/
+#define USB_CNTR_CTRM ((uint16_t)0x8000) /*!< Correct TRansfer Mask */
+#define USB_CNTR_PMAOVRM ((uint16_t)0x4000) /*!< DMA OVeR/underrun Mask */
+#define USB_CNTR_ERRM ((uint16_t)0x2000) /*!< ERRor Mask */
+#define USB_CNTR_WKUPM ((uint16_t)0x1000) /*!< WaKe UP Mask */
+#define USB_CNTR_SUSPM ((uint16_t)0x0800) /*!< SUSPend Mask */
+#define USB_CNTR_RESETM ((uint16_t)0x0400) /*!< RESET Mask */
+#define USB_CNTR_SOFM ((uint16_t)0x0200) /*!< Start Of Frame Mask */
+#define USB_CNTR_ESOFM ((uint16_t)0x0100) /*!< Expected Start Of Frame Mask */
+#define USB_CNTR_L1REQM ((uint16_t)0x0080) /*!< LPM L1 state request interrupt mask */
+#define USB_CNTR_L1RESUME ((uint16_t)0x0020) /*!< LPM L1 Resume request */
+#define USB_CNTR_RESUME ((uint16_t)0x0010) /*!< RESUME request */
+#define USB_CNTR_FSUSP ((uint16_t)0x0008) /*!< Force SUSPend */
+#define USB_CNTR_LPMODE ((uint16_t)0x0004) /*!< Low-power MODE */
+#define USB_CNTR_PDWN ((uint16_t)0x0002) /*!< Power DoWN */
+#define USB_CNTR_FRES ((uint16_t)0x0001) /*!< Force USB RESet */
+
+/************************* BCDR control register bits definitions ***********/
+#define USB_BCDR_DPPU ((uint16_t)0x8000) /*!< DP Pull-up Enable */
+#define USB_BCDR_PS2DET ((uint16_t)0x0080) /*!< PS2 port or proprietary charger detected */
+#define USB_BCDR_SDET ((uint16_t)0x0040) /*!< Secondary detection (SD) status */
+#define USB_BCDR_PDET ((uint16_t)0x0020) /*!< Primary detection (PD) status */
+#define USB_BCDR_DCDET ((uint16_t)0x0010) /*!< Data contact detection (DCD) status */
+#define USB_BCDR_SDEN ((uint16_t)0x0008) /*!< Secondary detection (SD) mode enable */
+#define USB_BCDR_PDEN ((uint16_t)0x0004) /*!< Primary detection (PD) mode enable */
+#define USB_BCDR_DCDEN ((uint16_t)0x0002) /*!< Data contact detection (DCD) mode enable */
+#define USB_BCDR_BCDEN ((uint16_t)0x0001) /*!< Battery charging detector (BCD) enable */
+
+/*************************** LPM register bits definitions ******************/
+#define USB_LPMCSR_BESL ((uint16_t)0x00F0) /*!< BESL value received with last ACKed LPM Token */
+#define USB_LPMCSR_REMWAKE ((uint16_t)0x0008) /*!< bRemoteWake value received with last ACKed LPM Token */
+#define USB_LPMCSR_LPMACK ((uint16_t)0x0002) /*!< LPM Token acknowledge enable*/
+#define USB_LPMCSR_LMPEN ((uint16_t)0x0001) /*!< LPM support enable */
+
+/******************** FNR Frame Number Register bit definitions ************/
+#define USB_FNR_RXDP ((uint16_t)0x8000) /*!< status of D+ data line */
+#define USB_FNR_RXDM ((uint16_t)0x4000) /*!< status of D- data line */
+#define USB_FNR_LCK ((uint16_t)0x2000) /*!< LoCKed */
+#define USB_FNR_LSOF ((uint16_t)0x1800) /*!< Lost SOF */
+#define USB_FNR_FN ((uint16_t)0x07FF) /*!< Frame Number */
+
+/******************** DADDR Device ADDRess bit definitions ****************/
+#define USB_DADDR_EF ((uint8_t)0x80) /*!< USB device address Enable Function */
+#define USB_DADDR_ADD ((uint8_t)0x7F) /*!< USB device address */
+
+/****************************** Endpoint register *************************/
+#define USB_EP0R USB_BASE /*!< endpoint 0 register address */
+#define USB_EP1R (USB_BASE + 0x04) /*!< endpoint 1 register address */
+#define USB_EP2R (USB_BASE + 0x08) /*!< endpoint 2 register address */
+#define USB_EP3R (USB_BASE + 0x0C) /*!< endpoint 3 register address */
+#define USB_EP4R (USB_BASE + 0x10) /*!< endpoint 4 register address */
+#define USB_EP5R (USB_BASE + 0x14) /*!< endpoint 5 register address */
+#define USB_EP6R (USB_BASE + 0x18) /*!< endpoint 6 register address */
+#define USB_EP7R (USB_BASE + 0x1C) /*!< endpoint 7 register address */
+/* bit positions */
+#define USB_EP_CTR_RX ((uint16_t)0x8000) /*!< EndPoint Correct TRansfer RX */
+#define USB_EP_DTOG_RX ((uint16_t)0x4000) /*!< EndPoint Data TOGGLE RX */
+#define USB_EPRX_STAT ((uint16_t)0x3000) /*!< EndPoint RX STATus bit field */
+#define USB_EP_SETUP ((uint16_t)0x0800) /*!< EndPoint SETUP */
+#define USB_EP_T_FIELD ((uint16_t)0x0600) /*!< EndPoint TYPE */
+#define USB_EP_KIND ((uint16_t)0x0100) /*!< EndPoint KIND */
+#define USB_EP_CTR_TX ((uint16_t)0x0080) /*!< EndPoint Correct TRansfer TX */
+#define USB_EP_DTOG_TX ((uint16_t)0x0040) /*!< EndPoint Data TOGGLE TX */
+#define USB_EPTX_STAT ((uint16_t)0x0030) /*!< EndPoint TX STATus bit field */
+#define USB_EPADDR_FIELD ((uint16_t)0x000F) /*!< EndPoint ADDRess FIELD */
+
+/* EndPoint REGister MASK (no toggle fields) */
+#define USB_EPREG_MASK (USB_EP_CTR_RX|USB_EP_SETUP|USB_EP_T_FIELD|USB_EP_KIND|USB_EP_CTR_TX|USB_EPADDR_FIELD)
+ /*!< EP_TYPE[1:0] EndPoint TYPE */
+#define USB_EP_TYPE_MASK ((uint16_t)0x0600) /*!< EndPoint TYPE Mask */
+#define USB_EP_BULK ((uint16_t)0x0000) /*!< EndPoint BULK */
+#define USB_EP_CONTROL ((uint16_t)0x0200) /*!< EndPoint CONTROL */
+#define USB_EP_ISOCHRONOUS ((uint16_t)0x0400) /*!< EndPoint ISOCHRONOUS */
+#define USB_EP_INTERRUPT ((uint16_t)0x0600) /*!< EndPoint INTERRUPT */
+#define USB_EP_T_MASK (~USB_EP_T_FIELD & USB_EPREG_MASK)
+
+#define USB_EPKIND_MASK (~USB_EP_KIND & USB_EPREG_MASK) /*!< EP_KIND EndPoint KIND */
+ /*!< STAT_TX[1:0] STATus for TX transfer */
+#define USB_EP_TX_DIS ((uint16_t)0x0000) /*!< EndPoint TX DISabled */
+#define USB_EP_TX_STALL ((uint16_t)0x0010) /*!< EndPoint TX STALLed */
+#define USB_EP_TX_NAK ((uint16_t)0x0020) /*!< EndPoint TX NAKed */
+#define USB_EP_TX_VALID ((uint16_t)0x0030) /*!< EndPoint TX VALID */
+#define USB_EPTX_DTOG1 ((uint16_t)0x0010) /*!< EndPoint TX Data TOGgle bit1 */
+#define USB_EPTX_DTOG2 ((uint16_t)0x0020) /*!< EndPoint TX Data TOGgle bit2 */
+#define USB_EPTX_DTOGMASK (USB_EPTX_STAT|USB_EPREG_MASK)
+ /*!< STAT_RX[1:0] STATus for RX transfer */
+#define USB_EP_RX_DIS ((uint16_t)0x0000) /*!< EndPoint RX DISabled */
+#define USB_EP_RX_STALL ((uint16_t)0x1000) /*!< EndPoint RX STALLed */
+#define USB_EP_RX_NAK ((uint16_t)0x2000) /*!< EndPoint RX NAKed */
+#define USB_EP_RX_VALID ((uint16_t)0x3000) /*!< EndPoint RX VALID */
+#define USB_EPRX_DTOG1 ((uint16_t)0x1000) /*!< EndPoint RX Data TOGgle bit1 */
+#define USB_EPRX_DTOG2 ((uint16_t)0x2000) /*!< EndPoint RX Data TOGgle bit1 */
+#define USB_EPRX_DTOGMASK (USB_EPRX_STAT|USB_EPREG_MASK)
+
+/******************************************************************************/
+/* */
+/* Window WATCHDOG (WWDG) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for WWDG_CR register ********************/
+#define WWDG_CR_T ((uint32_t)0x7F) /*!<T[6:0] bits (7-Bit counter (MSB to LSB)) */
+#define WWDG_CR_T0 ((uint32_t)0x01) /*!<Bit 0 */
+#define WWDG_CR_T1 ((uint32_t)0x02) /*!<Bit 1 */
+#define WWDG_CR_T2 ((uint32_t)0x04) /*!<Bit 2 */
+#define WWDG_CR_T3 ((uint32_t)0x08) /*!<Bit 3 */
+#define WWDG_CR_T4 ((uint32_t)0x10) /*!<Bit 4 */
+#define WWDG_CR_T5 ((uint32_t)0x20) /*!<Bit 5 */
+#define WWDG_CR_T6 ((uint32_t)0x40) /*!<Bit 6 */
+
+#define WWDG_CR_WDGA ((uint32_t)0x80) /*!<Activation bit */
+
+/******************* Bit definition for WWDG_CFR register *******************/
+#define WWDG_CFR_W ((uint32_t)0x007F) /*!<W[6:0] bits (7-bit window value) */
+#define WWDG_CFR_W0 ((uint32_t)0x0001) /*!<Bit 0 */
+#define WWDG_CFR_W1 ((uint32_t)0x0002) /*!<Bit 1 */
+#define WWDG_CFR_W2 ((uint32_t)0x0004) /*!<Bit 2 */
+#define WWDG_CFR_W3 ((uint32_t)0x0008) /*!<Bit 3 */
+#define WWDG_CFR_W4 ((uint32_t)0x0010) /*!<Bit 4 */
+#define WWDG_CFR_W5 ((uint32_t)0x0020) /*!<Bit 5 */
+#define WWDG_CFR_W6 ((uint32_t)0x0040) /*!<Bit 6 */
+
+#define WWDG_CFR_WDGTB ((uint32_t)0x0180) /*!<WDGTB[1:0] bits (Timer Base) */
+#define WWDG_CFR_WDGTB0 ((uint32_t)0x0080) /*!<Bit 0 */
+#define WWDG_CFR_WDGTB1 ((uint32_t)0x0100) /*!<Bit 1 */
+
+#define WWDG_CFR_EWI ((uint32_t)0x0200) /*!<Early Wakeup Interrupt */
+
+/******************* Bit definition for WWDG_SR register ********************/
+#define WWDG_SR_EWIF ((uint32_t)0x01) /*!<Early Wakeup Interrupt Flag */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+
+/** @addtogroup Exported_macro
+ * @{
+ */
+
+/****************************** ADC Instances *********************************/
+#define IS_ADC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == ADC1)
+
+#define IS_ADC_COMMON_INSTANCE(INSTANCE) ((INSTANCE) == ADC)
+
+/******************************* CAN Instances ********************************/
+#define IS_CAN_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CAN)
+
+/****************************** COMP Instances *********************************/
+#define IS_COMP_ALL_INSTANCE(INSTANCE) (((INSTANCE) == COMP1) || \
+ ((INSTANCE) == COMP2))
+
+#define IS_COMP_DAC1SWITCH_INSTANCE(INSTANCE) ((INSTANCE) == COMP1)
+
+#define IS_COMP_WINDOWMODE_INSTANCE(INSTANCE) ((INSTANCE) == COMP2)
+
+/****************************** CEC Instances *********************************/
+#define IS_CEC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CEC)
+
+/****************************** CRC Instances *********************************/
+#define IS_CRC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CRC)
+
+/******************************* DAC Instances ********************************/
+#define IS_DAC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == DAC)
+
+/******************************* DMA Instances ******************************/
+#define IS_DMA_ALL_INSTANCE(INSTANCE) (((INSTANCE) == DMA1_Channel1) || \
+ ((INSTANCE) == DMA1_Channel2) || \
+ ((INSTANCE) == DMA1_Channel3) || \
+ ((INSTANCE) == DMA1_Channel4) || \
+ ((INSTANCE) == DMA1_Channel5) || \
+ ((INSTANCE) == DMA1_Channel6) || \
+ ((INSTANCE) == DMA1_Channel7))
+
+/****************************** GPIO Instances ********************************/
+#define IS_GPIO_ALL_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB) || \
+ ((INSTANCE) == GPIOC) || \
+ ((INSTANCE) == GPIOD) || \
+ ((INSTANCE) == GPIOE) || \
+ ((INSTANCE) == GPIOF))
+
+#define IS_GPIO_AF_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB) || \
+ ((INSTANCE) == GPIOC) || \
+ ((INSTANCE) == GPIOD) || \
+ ((INSTANCE) == GPIOE))
+
+#define IS_GPIO_LOCK_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB))
+
+/****************************** I2C Instances *********************************/
+#define IS_I2C_ALL_INSTANCE(INSTANCE) (((INSTANCE) == I2C1) || \
+ ((INSTANCE) == I2C2))
+
+/****************************** I2S Instances *********************************/
+#define IS_I2S_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
+ ((INSTANCE) == SPI2))
+
+/****************************** IWDG Instances ********************************/
+#define IS_IWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == IWDG)
+
+/****************************** RTC Instances *********************************/
+#define IS_RTC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == RTC)
+
+/****************************** SMBUS Instances *********************************/
+#define IS_SMBUS_ALL_INSTANCE(INSTANCE) ((INSTANCE) == I2C1)
+
+/****************************** SPI Instances *********************************/
+#define IS_SPI_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
+ ((INSTANCE) == SPI2))
+
+/****************************** TIM Instances *********************************/
+#define IS_TIM_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM6) || \
+ ((INSTANCE) == TIM7) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CC1_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CC2_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_CC3_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CC4_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_TIX_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_ENCODER_INTERFACE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_HALL_INTERFACE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1))
+
+#define IS_TIM_XOR_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_MASTER_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM6) || \
+ ((INSTANCE) == TIM7) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_SLAVE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_32B_COUNTER_INSTANCE(INSTANCE)\
+ ((INSTANCE) == TIM2)
+
+#define IS_TIM_DMABURST_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_BREAK_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CCX_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM2) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM3) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM14) && \
+ (((CHANNEL) == TIM_CHANNEL_1))) \
+ || \
+ (((INSTANCE) == TIM15) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))) \
+ || \
+ (((INSTANCE) == TIM16) && \
+ (((CHANNEL) == TIM_CHANNEL_1))) \
+ || \
+ (((INSTANCE) == TIM17) && \
+ (((CHANNEL) == TIM_CHANNEL_1))))
+
+#define IS_TIM_CCXN_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3))) \
+ || \
+ (((INSTANCE) == TIM15) && \
+ ((CHANNEL) == TIM_CHANNEL_1)) \
+ || \
+ (((INSTANCE) == TIM16) && \
+ ((CHANNEL) == TIM_CHANNEL_1)) \
+ || \
+ (((INSTANCE) == TIM17) && \
+ ((CHANNEL) == TIM_CHANNEL_1)))
+
+#define IS_TIM_COUNTER_MODE_SELECT_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_REPETITION_COUNTER_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CLOCK_DIVISION_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_DMA_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM6) || \
+ ((INSTANCE) == TIM7) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_DMA_CC_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_COMMUTATION_EVENT_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_REMAP_INSTANCE(INSTANCE)\
+ ((INSTANCE) == TIM14)
+
+/****************************** TSC Instances *********************************/
+#define IS_TSC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == TSC)
+
+/*********************** UART Instances : IRDA mode ***************************/
+#define IS_IRDA_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/********************* UART Instances : Smard card mode ***********************/
+#define IS_SMARTCARD_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/******************** USART Instances : Synchronous mode **********************/
+#define IS_USART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3) || \
+ ((INSTANCE) == USART4))
+
+/******************** USART Instances : auto Baud rate detection **************/
+#define IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/******************** UART Instances : Asynchronous mode **********************/
+#define IS_UART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3) || \
+ ((INSTANCE) == USART4))
+
+/******************** UART Instances : Half-Duplex mode **********************/
+#define IS_UART_HALFDUPLEX_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3) || \
+ ((INSTANCE) == USART4))
+
+/****************** UART Instances : Hardware Flow control ********************/
+#define IS_UART_HWFLOW_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3) || \
+ ((INSTANCE) == USART4))
+
+/****************** UART Instances : LIN mode ********************/
+#define IS_UART_LIN_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/****************** UART Instances : wakeup from stop mode ********************/
+#define IS_UART_WAKEUP_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/****************** UART Instances : Auto Baud Rate detection ********************/
+#define IS_UART_AUTOBAUDRATE_DETECTION_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/****************** UART Instances : Driver enable detection ********************/
+#define IS_UART_DRIVER_ENABLE_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3) || \
+ ((INSTANCE) == USART4))
+
+/****************************** USB Instances ********************************/
+#define IS_USB_ALL_INSTANCE(INSTANCE) ((INSTANCE) == USB)
+
+/****************************** WWDG Instances ********************************/
+#define IS_WWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == WWDG)
+
+/**
+ * @}
+ */
+
+
+/******************************************************************************/
+/* For a painless codes migration between the STM32F0xx device product */
+/* lines, the aliases defined below are put in place to overcome the */
+/* differences in the interrupt handlers and IRQn definitions. */
+/* No need to update developed interrupt code when moving across */
+/* product lines within the same STM32F0 Family */
+/******************************************************************************/
+
+/* Aliases for __IRQn */
+#define PVD_VDDIO2_IRQn VDDIO2_IRQn
+#define RCC_IRQn RCC_CRS_IRQn
+#define DMA1_Channel4_5_IRQn DMA1_Channel4_5_6_7_IRQn
+#define ADC1_IRQn ADC1_COMP_IRQn
+#define TIM6_IRQn TIM6_DAC_IRQn
+
+/* Aliases for __IRQHandler */
+#define PVD_VDDIO2_IRQHandler VDDIO2_IRQHandler
+#define RCC_IRQHandler RCC_CRS_IRQHandler
+#define DMA1_Channel4_5_IRQHandler DMA1_Channel4_5_6_7_IRQHandler
+#define ADC1_IRQHandler ADC1_COMP_IRQHandler
+#define TIM6_IRQHandler TIM6_DAC_IRQHandler
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F078xx_H */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/include/devices/stm32f091xc.h b/f0/include/devices/stm32f091xc.h
new file mode 100755
index 0000000000000000000000000000000000000000..4f904138c65aa0c3fa62f7bad3d1b891c46bbed9
--- /dev/null
+++ b/f0/include/devices/stm32f091xc.h
@@ -0,0 +1,5710 @@
+/**
+ ******************************************************************************
+ * @file stm32f091xc.h
+ * @author MCD Application Team
+ * @version V2.2.1
+ * @date 09-January-2015
+ * @brief CMSIS STM32F091xC devices Peripheral Access Layer Header File.
+ *
+ * This file contains:
+ * - Data structures and the address mapping for all peripherals
+ * - Peripheral's registers declarations and bits definition
+ * - Macros to access peripheral’s registers hardware
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS_Device
+ * @{
+ */
+
+/** @addtogroup stm32f091xc
+ * @{
+ */
+
+#ifndef __STM32F091xC_H
+#define __STM32F091xC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+
+/**
+ * @brief Configuration of the Cortex-M0 Processor and Core Peripherals
+ */
+#define __CM0_REV 0 /*!< Core Revision r0p0 */
+#define __MPU_PRESENT 0 /*!< STM32F0xx do not provide MPU */
+#define __NVIC_PRIO_BITS 2 /*!< STM32F0xx uses 2 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F091xC device Interrupt Number Definition
+ */
+typedef enum
+{
+/****** Cortex-M0 Processor Exceptions Numbers **************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */
+ SVC_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */
+
+/****** STM32F091xC specific Interrupt Numbers **************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ PVD_VDDIO2_IRQn = 1, /*!< PVD & VDDIO2 Interrupts through EXTI Lines 16 and 31 */
+ RTC_IRQn = 2, /*!< RTC Interrupt through EXTI Lines 17, 19 and 20 */
+ FLASH_IRQn = 3, /*!< FLASH global Interrupt */
+ RCC_CRS_IRQn = 4, /*!< RCC & CRS global Interrupts */
+ EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupts */
+ EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupts */
+ EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupts */
+ TSC_IRQn = 8, /*!< Touch Sensing Controller Interrupts */
+ DMA1_Ch1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */
+ DMA1_Ch2_3_DMA2_Ch1_2_IRQn = 10, /*!< DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2 Interrupts */
+ DMA1_Ch4_7_DMA2_Ch3_5_IRQn = 11, /*!< DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5 Interrupts */
+ ADC1_COMP_IRQn = 12, /*!< ADC, COMP1 and COMP2 Interrupts (EXTI Lines 21 and 22) */
+ TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupts */
+ TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 15, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 16, /*!< TIM3 global Interrupt */
+ TIM6_DAC_IRQn = 17, /*!< TIM6 global and DAC channel underrun error Interrupts */
+ TIM7_IRQn = 18, /*!< TIM7 global Interrupt */
+ TIM14_IRQn = 19, /*!< TIM14 global Interrupt */
+ TIM15_IRQn = 20, /*!< TIM15 global Interrupt */
+ TIM16_IRQn = 21, /*!< TIM16 global Interrupt */
+ TIM17_IRQn = 22, /*!< TIM17 global Interrupt */
+ I2C1_IRQn = 23, /*!< I2C1 Event Interrupt & EXTI Line23 Interrupt (I2C1 wakeup) */
+ I2C2_IRQn = 24, /*!< I2C2 Event Interrupt */
+ SPI1_IRQn = 25, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 26, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 27, /*!< USART1 global Interrupt & EXTI Line25 Interrupt (USART1 wakeup) */
+ USART2_IRQn = 28, /*!< USART2 global Interrupt & EXTI Line26 Interrupt (USART2 wakeup) */
+ USART3_8_IRQn = 29, /*!< USART3 to USART8 global Interrupts */
+ CEC_CAN_IRQn = 30 /*!< CEC and CAN global Interrupts & EXTI Line27 Interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm0.h" /* Cortex-M0 processor and core peripherals */
+#include "system_stm32f0xx.h" /* STM32F0xx System Header */
+#include <stdint.h>
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< ADC Interrupt and Status register, Address offset:0x00 */
+ __IO uint32_t IER; /*!< ADC Interrupt Enable register, Address offset:0x04 */
+ __IO uint32_t CR; /*!< ADC Control register, Address offset:0x08 */
+ __IO uint32_t CFGR1; /*!< ADC Configuration register 1, Address offset:0x0C */
+ __IO uint32_t CFGR2; /*!< ADC Configuration register 2, Address offset:0x10 */
+ __IO uint32_t SMPR; /*!< ADC Sampling time register, Address offset:0x14 */
+ uint32_t RESERVED1; /*!< Reserved, 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, 0x1C */
+ __IO uint32_t TR; /*!< ADC watchdog threshold register, Address offset:0x20 */
+ uint32_t RESERVED3; /*!< Reserved, 0x24 */
+ __IO uint32_t CHSELR; /*!< ADC channel selection register, Address offset:0x28 */
+ uint32_t RESERVED4[5]; /*!< Reserved, 0x2C */
+ __IO uint32_t DR; /*!< ADC data register, Address offset:0x40 */
+}ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CCR;
+}ADC_Common_TypeDef;
+
+/**
+ * @brief Controller Area Network TxMailBox
+ */
+typedef struct
+{
+ __IO uint32_t TIR; /*!< CAN TX mailbox identifier register */
+ __IO uint32_t TDTR; /*!< CAN mailbox data length control and time stamp register */
+ __IO uint32_t TDLR; /*!< CAN mailbox data low register */
+ __IO uint32_t TDHR; /*!< CAN mailbox data high register */
+}CAN_TxMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FIFOMailBox
+ */
+typedef struct
+{
+ __IO uint32_t RIR; /*!< CAN receive FIFO mailbox identifier register */
+ __IO uint32_t RDTR; /*!< CAN receive FIFO mailbox data length control and time stamp register */
+ __IO uint32_t RDLR; /*!< CAN receive FIFO mailbox data low register */
+ __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */
+}CAN_FIFOMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FilterRegister
+ */
+typedef struct
+{
+ __IO uint32_t FR1; /*!< CAN Filter bank register 1 */
+ __IO uint32_t FR2; /*!< CAN Filter bank register 1 */
+}CAN_FilterRegister_TypeDef;
+
+/**
+ * @brief Controller Area Network
+ */
+typedef struct
+{
+ __IO uint32_t MCR; /*!< CAN master control register, Address offset: 0x00 */
+ __IO uint32_t MSR; /*!< CAN master status register, Address offset: 0x04 */
+ __IO uint32_t TSR; /*!< CAN transmit status register, Address offset: 0x08 */
+ __IO uint32_t RF0R; /*!< CAN receive FIFO 0 register, Address offset: 0x0C */
+ __IO uint32_t RF1R; /*!< CAN receive FIFO 1 register, Address offset: 0x10 */
+ __IO uint32_t IER; /*!< CAN interrupt enable register, Address offset: 0x14 */
+ __IO uint32_t ESR; /*!< CAN error status register, Address offset: 0x18 */
+ __IO uint32_t BTR; /*!< CAN bit timing register, Address offset: 0x1C */
+ uint32_t RESERVED0[88]; /*!< Reserved, 0x020 - 0x17F */
+ CAN_TxMailBox_TypeDef sTxMailBox[3]; /*!< CAN Tx MailBox, Address offset: 0x180 - 0x1AC */
+ CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; /*!< CAN FIFO MailBox, Address offset: 0x1B0 - 0x1CC */
+ uint32_t RESERVED1[12]; /*!< Reserved, 0x1D0 - 0x1FF */
+ __IO uint32_t FMR; /*!< CAN filter master register, Address offset: 0x200 */
+ __IO uint32_t FM1R; /*!< CAN filter mode register, Address offset: 0x204 */
+ uint32_t RESERVED2; /*!< Reserved, 0x208 */
+ __IO uint32_t FS1R; /*!< CAN filter scale register, Address offset: 0x20C */
+ uint32_t RESERVED3; /*!< Reserved, 0x210 */
+ __IO uint32_t FFA1R; /*!< CAN filter FIFO assignment register, Address offset: 0x214 */
+ uint32_t RESERVED4; /*!< Reserved, 0x218 */
+ __IO uint32_t FA1R; /*!< CAN filter activation register, Address offset: 0x21C */
+ uint32_t RESERVED5[8]; /*!< Reserved, 0x220-0x23F */
+ CAN_FilterRegister_TypeDef sFilterRegister[28]; /*!< CAN Filter Register, Address offset: 0x240-0x31C */
+}CAN_TypeDef;
+
+/**
+ * @brief HDMI-CEC
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< CEC control register, Address offset:0x00 */
+ __IO uint32_t CFGR; /*!< CEC configuration register, Address offset:0x04 */
+ __IO uint32_t TXDR; /*!< CEC Tx data register , Address offset:0x08 */
+ __IO uint32_t RXDR; /*!< CEC Rx Data Register, Address offset:0x0C */
+ __IO uint32_t ISR; /*!< CEC Interrupt and Status Register, Address offset:0x10 */
+ __IO uint32_t IER; /*!< CEC interrupt enable register, Address offset:0x14 */
+}CEC_TypeDef;
+
+/**
+ * @brief Comparator
+ */
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< Comparator 1 & 2 control Status register, Address offset: 0x00 */
+}COMP1_2_TypeDef;
+
+typedef struct
+{
+ __IO uint16_t CSR; /*!< Comparator control Status register, Address offset: 0x00 */
+}COMP_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+ uint32_t RESERVED2; /*!< Reserved, 0x0C */
+ __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */
+ __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */
+}CRC_TypeDef;
+
+/**
+ * @brief Clock Recovery System
+ */
+typedef struct
+{
+__IO uint32_t CR; /*!< CRS ccontrol register, Address offset: 0x00 */
+__IO uint32_t CFGR; /*!< CRS configuration register, Address offset: 0x04 */
+__IO uint32_t ISR; /*!< CRS interrupt and status register, Address offset: 0x08 */
+__IO uint32_t ICR; /*!< CRS interrupt flag clear register, Address offset: 0x0C */
+}CRS_TypeDef;
+
+/**
+ * @brief Digital to Analog Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */
+ __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */
+ __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */
+ __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */
+ __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */
+ __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */
+ __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */
+ __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */
+ __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */
+ __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */
+ __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */
+ __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */
+ __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */
+ __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */
+}DAC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< DMA channel x configuration register */
+ __IO uint32_t CNDTR; /*!< DMA channel x number of data register */
+ __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */
+ __IO uint32_t CMAR; /*!< DMA channel x memory address register */
+}DMA_Channel_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */
+ __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */
+ uint32_t RESERVED0[40];/*!< Reserved as declared by channel typedef 0x08 - 0xA4 */
+ __IO uint32_t CSELR; /*!< Channel selection register, Address offset: 0xA8 */
+}DMA_TypeDef;
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!<EXTI Interrupt mask register, Address offset: 0x00 */
+ __IO uint32_t EMR; /*!<EXTI Event mask register, Address offset: 0x04 */
+ __IO uint32_t RTSR; /*!<EXTI Rising trigger selection register , Address offset: 0x08 */
+ __IO uint32_t FTSR; /*!<EXTI Falling trigger selection register, Address offset: 0x0C */
+ __IO uint32_t SWIER; /*!<EXTI Software interrupt event register, Address offset: 0x10 */
+ __IO uint32_t PR; /*!<EXTI Pending register, Address offset: 0x14 */
+}EXTI_TypeDef;
+
+/**
+ * @brief FLASH Registers
+ */
+typedef struct
+{
+ __IO uint32_t ACR; /*!<FLASH access control register, Address offset: 0x00 */
+ __IO uint32_t KEYR; /*!<FLASH key register, Address offset: 0x04 */
+ __IO uint32_t OPTKEYR; /*!<FLASH OPT key register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!<FLASH status register, Address offset: 0x0C */
+ __IO uint32_t CR; /*!<FLASH control register, Address offset: 0x10 */
+ __IO uint32_t AR; /*!<FLASH address register, Address offset: 0x14 */
+ __IO uint32_t RESERVED; /*!< Reserved, 0x18 */
+ __IO uint32_t OBR; /*!<FLASH option bytes register, Address offset: 0x1C */
+ __IO uint32_t WRPR; /*!<FLASH option bytes register, Address offset: 0x20 */
+}FLASH_TypeDef;
+
+
+/**
+ * @brief Option Bytes Registers
+ */
+typedef struct
+{
+ __IO uint16_t RDP; /*!< FLASH option byte Read protection, Address offset: 0x00 */
+ __IO uint16_t USER; /*!< FLASH option byte user options, Address offset: 0x02 */
+ __IO uint16_t DATA0; /*!< User data byte 0 (stored in FLASH_OBR[23:16]), Address offset: 0x04 */
+ __IO uint16_t DATA1; /*!< User data byte 1 (stored in FLASH_OBR[31:24]), Address offset: 0x06 */
+ __IO uint16_t WRP0; /*!< FLASH option byte write protection 0, Address offset: 0x08 */
+ __IO uint16_t WRP1; /*!< FLASH option byte write protection 1, Address offset: 0x0A */
+ __IO uint16_t WRP2; /*!< FLASH option byte write protection 2, Address offset: 0x0C */
+ __IO uint16_t WRP3; /*!< FLASH option byte write protection 3, Address offset: 0x0E */
+}OB_TypeDef;
+
+/**
+ * @brief General Purpose I/O
+ */
+
+typedef struct
+{
+ __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */
+ __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */
+ __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */
+ __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */
+ __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */
+ __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */
+ __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x1A */
+ __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */
+ __IO uint32_t AFR[2]; /*!< GPIO alternate function low register, Address offset: 0x20-0x24 */
+ __IO uint32_t BRR; /*!< GPIO bit reset register, Address offset: 0x28 */
+}GPIO_TypeDef;
+
+/**
+ * @brief SysTem Configuration
+ */
+
+typedef struct
+{
+ __IO uint32_t CFGR1; /*!< SYSCFG configuration register 1, Address offset: 0x00 */
+ uint32_t RESERVED; /*!< Reserved, 0x04 */
+ __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration register, Address offset: 0x14-0x08 */
+ __IO uint32_t CFGR2; /*!< SYSCFG configuration register 2, Address offset: 0x18 */
+ uint32_t RESERVED1[25]; /*!< Reserved + COMP, 0x1C */
+ __IO uint32_t IT_LINE_SR[32]; /*!< SYSCFG configuration IT_LINE register, Address offset: 0x80 */
+
+}SYSCFG_TypeDef;
+
+/**
+ * @brief Inter-integrated Circuit Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */
+ __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */
+ __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */
+ __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */
+ __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */
+ __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */
+ __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */
+ __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */
+ __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */
+ __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */
+}I2C_TypeDef;
+
+/**
+ * @brief Independent WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */
+ __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */
+ __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */
+ __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */
+}IWDG_TypeDef;
+
+/**
+ * @brief Power Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< PWR power control register, Address offset: 0x00 */
+ __IO uint32_t CSR; /*!< PWR power control/status register, Address offset: 0x04 */
+}PWR_TypeDef;
+
+/**
+ * @brief Reset and Clock Control
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */
+ __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x04 */
+ __IO uint32_t CIR; /*!< RCC clock interrupt register, Address offset: 0x08 */
+ __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x0C */
+ __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x10 */
+ __IO uint32_t AHBENR; /*!< RCC AHB peripheral clock register, Address offset: 0x14 */
+ __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x18 */
+ __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x1C */
+ __IO uint32_t BDCR; /*!< RCC Backup domain control register, Address offset: 0x20 */
+ __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x24 */
+ __IO uint32_t AHBRSTR; /*!< RCC AHB peripheral reset register, Address offset: 0x28 */
+ __IO uint32_t CFGR2; /*!< RCC clock configuration register 2, Address offset: 0x2C */
+ __IO uint32_t CFGR3; /*!< RCC clock configuration register 3, Address offset: 0x30 */
+ __IO uint32_t CR2; /*!< RCC clock control register 2, Address offset: 0x34 */
+}RCC_TypeDef;
+
+/**
+ * @brief Real-Time Clock
+ */
+
+typedef struct
+{
+ __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */
+ __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */
+ __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */
+ uint32_t RESERVED1; /*!< Reserved, Address offset: 0x18 */
+ __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */
+ uint32_t RESERVED2; /*!< Reserved, Address offset: 0x20 */
+ __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */
+ __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */
+ __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */
+ __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */
+ __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */
+ __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */
+ __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */
+ __IO uint32_t TAFCR; /*!< RTC tamper and alternate function configuration register, Address offset: 0x40 */
+ __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */
+ uint32_t RESERVED3; /*!< Reserved, Address offset: 0x48 */
+ uint32_t RESERVED4; /*!< Reserved, Address offset: 0x4C */
+ __IO uint32_t BKP0R; /*!< RTC backup register 0, Address offset: 0x50 */
+ __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */
+ __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */
+ __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */
+ __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */
+}RTC_TypeDef;
+
+/**
+ * @brief Serial Peripheral Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< SPI Control register 1 (not used in I2S mode), Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */
+ __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */
+ __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */
+ __IO uint32_t RXCRCR; /*!< SPI Rx CRC register (not used in I2S mode), Address offset: 0x14 */
+ __IO uint32_t TXCRCR; /*!< SPI Tx CRC register (not used in I2S mode), Address offset: 0x18 */
+ __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */
+ __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */
+}SPI_TypeDef;
+
+/**
+ * @brief TIM
+ */
+typedef struct
+{
+ __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */
+ __IO uint32_t SMCR; /*!< TIM slave Mode Control register, Address offset: 0x08 */
+ __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */
+ __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */
+ __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */
+ __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */
+ __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */
+ __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */
+ __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */
+ __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */
+ __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */
+ __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */
+ __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */
+ __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */
+ __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */
+ __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */
+ __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */
+ __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */
+ __IO uint32_t DMAR; /*!< TIM DMA address for full transfer register, Address offset: 0x4C */
+ __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */
+}TIM_TypeDef;
+
+/**
+ * @brief Touch Sensing Controller (TSC)
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< TSC control register, Address offset: 0x00 */
+ __IO uint32_t IER; /*!< TSC interrupt enable register, Address offset: 0x04 */
+ __IO uint32_t ICR; /*!< TSC interrupt clear register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< TSC interrupt status register, Address offset: 0x0C */
+ __IO uint32_t IOHCR; /*!< TSC I/O hysteresis control register, Address offset: 0x10 */
+ uint32_t RESERVED1; /*!< Reserved, Address offset: 0x14 */
+ __IO uint32_t IOASCR; /*!< TSC I/O analog switch control register, Address offset: 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, Address offset: 0x1C */
+ __IO uint32_t IOSCR; /*!< TSC I/O sampling control register, Address offset: 0x20 */
+ uint32_t RESERVED3; /*!< Reserved, Address offset: 0x24 */
+ __IO uint32_t IOCCR; /*!< TSC I/O channel control register, Address offset: 0x28 */
+ uint32_t RESERVED4; /*!< Reserved, Address offset: 0x2C */
+ __IO uint32_t IOGCSR; /*!< TSC I/O group control status register, Address offset: 0x30 */
+ __IO uint32_t IOGXCR[8]; /*!< TSC I/O group x counter register, Address offset: 0x34-50 */
+}TSC_TypeDef;
+
+/**
+ * @brief Universal Synchronous Asynchronous Receiver Transmitter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */
+ __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */
+ __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */
+ __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */
+ __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */
+ __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */
+ __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */
+ __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */
+ __IO uint16_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */
+ uint16_t RESERVED1; /*!< Reserved, 0x26 */
+ __IO uint16_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */
+ uint16_t RESERVED2; /*!< Reserved, 0x2A */
+}USART_TypeDef;
+
+/**
+ * @brief Window WATCHDOG
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */
+ __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */
+}WWDG_TypeDef;
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_memory_map
+ * @{
+ */
+
+#define FLASH_BASE ((uint32_t)0x08000000) /*!< FLASH base address in the alias region */
+#define SRAM_BASE ((uint32_t)0x20000000) /*!< SRAM base address in the alias region */
+#define PERIPH_BASE ((uint32_t)0x40000000) /*!< Peripheral base address in the alias region */
+
+/*!< Peripheral memory map */
+#define APBPERIPH_BASE PERIPH_BASE
+#define AHBPERIPH_BASE (PERIPH_BASE + 0x00020000)
+#define AHB2PERIPH_BASE (PERIPH_BASE + 0x08000000)
+
+#define TIM2_BASE (APBPERIPH_BASE + 0x00000000)
+#define TIM3_BASE (APBPERIPH_BASE + 0x00000400)
+#define TIM6_BASE (APBPERIPH_BASE + 0x00001000)
+#define TIM7_BASE (APBPERIPH_BASE + 0x00001400)
+#define TIM14_BASE (APBPERIPH_BASE + 0x00002000)
+#define RTC_BASE (APBPERIPH_BASE + 0x00002800)
+#define WWDG_BASE (APBPERIPH_BASE + 0x00002C00)
+#define IWDG_BASE (APBPERIPH_BASE + 0x00003000)
+#define SPI2_BASE (APBPERIPH_BASE + 0x00003800)
+#define USART2_BASE (APBPERIPH_BASE + 0x00004400)
+#define USART3_BASE (APBPERIPH_BASE + 0x00004800)
+#define USART4_BASE (APBPERIPH_BASE + 0x00004C00)
+#define USART5_BASE (APBPERIPH_BASE + 0x00005000)
+#define I2C1_BASE (APBPERIPH_BASE + 0x00005400)
+#define I2C2_BASE (APBPERIPH_BASE + 0x00005800)
+#define CAN_BASE (APBPERIPH_BASE + 0x00006400)
+#define CRS_BASE (APBPERIPH_BASE + 0x00006C00)
+#define PWR_BASE (APBPERIPH_BASE + 0x00007000)
+#define DAC_BASE (APBPERIPH_BASE + 0x00007400)
+#define CEC_BASE (APBPERIPH_BASE + 0x00007800)
+
+#define SYSCFG_BASE (APBPERIPH_BASE + 0x00010000)
+#define COMP_BASE (APBPERIPH_BASE + 0x0001001C)
+#define EXTI_BASE (APBPERIPH_BASE + 0x00010400)
+#define USART6_BASE (APBPERIPH_BASE + 0x00011400)
+#define USART7_BASE (APBPERIPH_BASE + 0x00011800)
+#define USART8_BASE (APBPERIPH_BASE + 0x00011C00)
+#define ADC1_BASE (APBPERIPH_BASE + 0x00012400)
+#define ADC_BASE (APBPERIPH_BASE + 0x00012708)
+#define TIM1_BASE (APBPERIPH_BASE + 0x00012C00)
+#define SPI1_BASE (APBPERIPH_BASE + 0x00013000)
+#define USART1_BASE (APBPERIPH_BASE + 0x00013800)
+#define TIM15_BASE (APBPERIPH_BASE + 0x00014000)
+#define TIM16_BASE (APBPERIPH_BASE + 0x00014400)
+#define TIM17_BASE (APBPERIPH_BASE + 0x00014800)
+#define DBGMCU_BASE (APBPERIPH_BASE + 0x00015800)
+
+/*!< AHB1 peripherals */
+#define DMA1_BASE (AHBPERIPH_BASE + 0x00000000)
+#define DMA1_Channel1_BASE (DMA1_BASE + 0x00000008)
+#define DMA1_Channel2_BASE (DMA1_BASE + 0x0000001C)
+#define DMA1_Channel3_BASE (DMA1_BASE + 0x00000030)
+#define DMA1_Channel4_BASE (DMA1_BASE + 0x00000044)
+#define DMA1_Channel5_BASE (DMA1_BASE + 0x00000058)
+#define DMA1_Channel6_BASE (DMA1_BASE + 0x0000006C)
+#define DMA1_Channel7_BASE (DMA1_BASE + 0x00000080)
+#define DMA2_BASE (AHBPERIPH_BASE + 0x00000400)
+#define DMA2_Channel1_BASE (DMA2_BASE + 0x00000008)
+#define DMA2_Channel2_BASE (DMA2_BASE + 0x0000001C)
+#define DMA2_Channel3_BASE (DMA2_BASE + 0x00000030)
+#define DMA2_Channel4_BASE (DMA2_BASE + 0x00000044)
+#define DMA2_Channel5_BASE (DMA2_BASE + 0x00000058)
+
+#define RCC_BASE (AHBPERIPH_BASE + 0x00001000)
+#define FLASH_R_BASE (AHBPERIPH_BASE + 0x00002000) /*!< FLASH registers base address */
+#define OB_BASE ((uint32_t)0x1FFFF800) /*!< FLASH Option Bytes base address */
+#define CRC_BASE (AHBPERIPH_BASE + 0x00003000)
+#define TSC_BASE (AHBPERIPH_BASE + 0x00004000)
+
+#define GPIOA_BASE (AHB2PERIPH_BASE + 0x00000000)
+#define GPIOB_BASE (AHB2PERIPH_BASE + 0x00000400)
+#define GPIOC_BASE (AHB2PERIPH_BASE + 0x00000800)
+#define GPIOD_BASE (AHB2PERIPH_BASE + 0x00000C00)
+#define GPIOE_BASE (AHB2PERIPH_BASE + 0x00001000)
+#define GPIOF_BASE (AHB2PERIPH_BASE + 0x00001400)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_declaration
+ * @{
+ */
+
+#define TIM2 ((TIM_TypeDef *) TIM2_BASE)
+#define TIM3 ((TIM_TypeDef *) TIM3_BASE)
+#define TIM6 ((TIM_TypeDef *) TIM6_BASE)
+#define TIM7 ((TIM_TypeDef *) TIM7_BASE)
+#define TIM14 ((TIM_TypeDef *) TIM14_BASE)
+#define RTC ((RTC_TypeDef *) RTC_BASE)
+#define WWDG ((WWDG_TypeDef *) WWDG_BASE)
+#define IWDG ((IWDG_TypeDef *) IWDG_BASE)
+#define SPI2 ((SPI_TypeDef *) SPI2_BASE)
+#define USART2 ((USART_TypeDef *) USART2_BASE)
+#define USART3 ((USART_TypeDef *) USART3_BASE)
+#define USART4 ((USART_TypeDef *) USART4_BASE)
+#define USART5 ((USART_TypeDef *) USART5_BASE)
+#define I2C1 ((I2C_TypeDef *) I2C1_BASE)
+#define I2C2 ((I2C_TypeDef *) I2C2_BASE)
+#define CAN ((CAN_TypeDef *) CAN_BASE)
+#define CRS ((CRS_TypeDef *) CRS_BASE)
+#define PWR ((PWR_TypeDef *) PWR_BASE)
+#define DAC ((DAC_TypeDef *) DAC_BASE)
+#define CEC ((CEC_TypeDef *) CEC_BASE)
+#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE)
+#define COMP ((COMP1_2_TypeDef *) COMP_BASE)
+#define COMP1 ((COMP_TypeDef *) COMP_BASE)
+#define COMP2 ((COMP_TypeDef *) (COMP_BASE + 0x00000002))
+#define EXTI ((EXTI_TypeDef *) EXTI_BASE)
+#define USART6 ((USART_TypeDef *) USART6_BASE)
+#define USART7 ((USART_TypeDef *) USART7_BASE)
+#define USART8 ((USART_TypeDef *) USART8_BASE)
+#define ADC1 ((ADC_TypeDef *) ADC1_BASE)
+#define ADC ((ADC_Common_TypeDef *) ADC_BASE)
+#define TIM1 ((TIM_TypeDef *) TIM1_BASE)
+#define SPI1 ((SPI_TypeDef *) SPI1_BASE)
+#define USART1 ((USART_TypeDef *) USART1_BASE)
+#define TIM15 ((TIM_TypeDef *) TIM15_BASE)
+#define TIM16 ((TIM_TypeDef *) TIM16_BASE)
+#define TIM17 ((TIM_TypeDef *) TIM17_BASE)
+#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE)
+#define DMA1 ((DMA_TypeDef *) DMA1_BASE)
+#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE)
+#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE)
+#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE)
+#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE)
+#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE)
+#define DMA1_Channel6 ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE)
+#define DMA1_Channel7 ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE)
+#define DMA2 ((DMA_TypeDef *) DMA2_BASE)
+#define DMA2_Channel1 ((DMA_Channel_TypeDef *) DMA2_Channel1_BASE)
+#define DMA2_Channel2 ((DMA_Channel_TypeDef *) DMA2_Channel2_BASE)
+#define DMA2_Channel3 ((DMA_Channel_TypeDef *) DMA2_Channel3_BASE)
+#define DMA2_Channel4 ((DMA_Channel_TypeDef *) DMA2_Channel4_BASE)
+#define DMA2_Channel5 ((DMA_Channel_TypeDef *) DMA2_Channel5_BASE)
+#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE)
+#define OB ((OB_TypeDef *) OB_BASE)
+#define RCC ((RCC_TypeDef *) RCC_BASE)
+#define CRC ((CRC_TypeDef *) CRC_BASE)
+#define TSC ((TSC_TypeDef *) TSC_BASE)
+#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE)
+#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE)
+#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE)
+#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE)
+#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE)
+#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_constants
+ * @{
+ */
+
+ /** @addtogroup Peripheral_Registers_Bits_Definition
+ * @{
+ */
+
+/******************************************************************************/
+/* Peripheral Registers Bits Definition */
+/******************************************************************************/
+/******************************************************************************/
+/* */
+/* Analog to Digital Converter (ADC) */
+/* */
+/******************************************************************************/
+/******************** Bits definition for ADC_ISR register ******************/
+#define ADC_ISR_AWD ((uint32_t)0x00000080) /*!< Analog watchdog flag */
+#define ADC_ISR_OVR ((uint32_t)0x00000010) /*!< Overrun flag */
+#define ADC_ISR_EOSEQ ((uint32_t)0x00000008) /*!< End of Sequence flag */
+#define ADC_ISR_EOC ((uint32_t)0x00000004) /*!< End of Conversion */
+#define ADC_ISR_EOSMP ((uint32_t)0x00000002) /*!< End of sampling flag */
+#define ADC_ISR_ADRDY ((uint32_t)0x00000001) /*!< ADC Ready */
+
+/* Old EOSEQ bit definition, maintained for legacy purpose */
+#define ADC_ISR_EOS ADC_ISR_EOSEQ
+
+/******************** Bits definition for ADC_IER register ******************/
+#define ADC_IER_AWDIE ((uint32_t)0x00000080) /*!< Analog Watchdog interrupt enable */
+#define ADC_IER_OVRIE ((uint32_t)0x00000010) /*!< Overrun interrupt enable */
+#define ADC_IER_EOSEQIE ((uint32_t)0x00000008) /*!< End of Sequence of conversion interrupt enable */
+#define ADC_IER_EOCIE ((uint32_t)0x00000004) /*!< End of Conversion interrupt enable */
+#define ADC_IER_EOSMPIE ((uint32_t)0x00000002) /*!< End of sampling interrupt enable */
+#define ADC_IER_ADRDYIE ((uint32_t)0x00000001) /*!< ADC Ready interrupt enable */
+
+/* Old EOSEQIE bit definition, maintained for legacy purpose */
+#define ADC_IER_EOSIE ADC_IER_EOSEQIE
+
+/******************** Bits definition for ADC_CR register *******************/
+#define ADC_CR_ADCAL ((uint32_t)0x80000000) /*!< ADC calibration */
+#define ADC_CR_ADSTP ((uint32_t)0x00000010) /*!< ADC stop of conversion command */
+#define ADC_CR_ADSTART ((uint32_t)0x00000004) /*!< ADC start of conversion */
+#define ADC_CR_ADDIS ((uint32_t)0x00000002) /*!< ADC disable command */
+#define ADC_CR_ADEN ((uint32_t)0x00000001) /*!< ADC enable control */
+
+/******************* Bits definition for ADC_CFGR1 register *****************/
+#define ADC_CFGR1_AWDCH ((uint32_t)0x7C000000) /*!< AWDCH[4:0] bits (Analog watchdog channel select bits) */
+#define ADC_CFGR1_AWDCH_0 ((uint32_t)0x04000000) /*!< Bit 0 */
+#define ADC_CFGR1_AWDCH_1 ((uint32_t)0x08000000) /*!< Bit 1 */
+#define ADC_CFGR1_AWDCH_2 ((uint32_t)0x10000000) /*!< Bit 2 */
+#define ADC_CFGR1_AWDCH_3 ((uint32_t)0x20000000) /*!< Bit 3 */
+#define ADC_CFGR1_AWDCH_4 ((uint32_t)0x40000000) /*!< Bit 4 */
+#define ADC_CFGR1_AWDEN ((uint32_t)0x00800000) /*!< Analog watchdog enable on regular channels */
+#define ADC_CFGR1_AWDSGL ((uint32_t)0x00400000) /*!< Enable the watchdog on a single channel or on all channels */
+#define ADC_CFGR1_DISCEN ((uint32_t)0x00010000) /*!< Discontinuous mode on regular channels */
+#define ADC_CFGR1_AUTOFF ((uint32_t)0x00008000) /*!< ADC auto power off */
+#define ADC_CFGR1_WAIT ((uint32_t)0x00004000) /*!< ADC wait conversion mode */
+#define ADC_CFGR1_CONT ((uint32_t)0x00002000) /*!< Continuous Conversion */
+#define ADC_CFGR1_OVRMOD ((uint32_t)0x00001000) /*!< Overrun mode */
+#define ADC_CFGR1_EXTEN ((uint32_t)0x00000C00) /*!< EXTEN[1:0] bits (External Trigger Conversion mode for regular channels) */
+#define ADC_CFGR1_EXTEN_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define ADC_CFGR1_EXTEN_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define ADC_CFGR1_EXTSEL ((uint32_t)0x000001C0) /*!< EXTSEL[2:0] bits (External Event Select for regular group) */
+#define ADC_CFGR1_EXTSEL_0 ((uint32_t)0x00000040) /*!< Bit 0 */
+#define ADC_CFGR1_EXTSEL_1 ((uint32_t)0x00000080) /*!< Bit 1 */
+#define ADC_CFGR1_EXTSEL_2 ((uint32_t)0x00000100) /*!< Bit 2 */
+#define ADC_CFGR1_ALIGN ((uint32_t)0x00000020) /*!< Data Alignment */
+#define ADC_CFGR1_RES ((uint32_t)0x00000018) /*!< RES[1:0] bits (Resolution) */
+#define ADC_CFGR1_RES_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define ADC_CFGR1_RES_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define ADC_CFGR1_SCANDIR ((uint32_t)0x00000004) /*!< Sequence scan direction */
+#define ADC_CFGR1_DMACFG ((uint32_t)0x00000002) /*!< Direct memory access configuration */
+#define ADC_CFGR1_DMAEN ((uint32_t)0x00000001) /*!< Direct memory access enable */
+
+/* Old WAIT bit definition, maintained for legacy purpose */
+#define ADC_CFGR1_AUTDLY ADC_CFGR1_WAIT
+
+/******************* Bits definition for ADC_CFGR2 register *****************/
+#define ADC_CFGR2_CKMODE ((uint32_t)0xC0000000) /*!< ADC clock mode */
+#define ADC_CFGR2_CKMODE_1 ((uint32_t)0x80000000) /*!< ADC clocked by PCLK div4 */
+#define ADC_CFGR2_CKMODE_0 ((uint32_t)0x40000000) /*!< ADC clocked by PCLK div2 */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_CFGR2_JITOFFDIV4 ADC_CFGR2_CKMODE_1 /*!< ADC clocked by PCLK div4 */
+#define ADC_CFGR2_JITOFFDIV2 ADC_CFGR2_CKMODE_0 /*!< ADC clocked by PCLK div2 */
+
+/****************** Bit definition for ADC_SMPR register ********************/
+#define ADC_SMPR_SMP ((uint32_t)0x00000007) /*!< SMP[2:0] bits (Sampling time selection) */
+#define ADC_SMPR_SMP_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define ADC_SMPR_SMP_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define ADC_SMPR_SMP_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_SMPR1_SMPR ADC_SMPR_SMP /*!< SMP[2:0] bits (Sampling time selection) */
+#define ADC_SMPR1_SMPR_0 ADC_SMPR_SMP_0 /*!< Bit 0 */
+#define ADC_SMPR1_SMPR_1 ADC_SMPR_SMP_1 /*!< Bit 1 */
+#define ADC_SMPR1_SMPR_2 ADC_SMPR_SMP_2 /*!< Bit 2 */
+
+/******************* Bit definition for ADC_TR register ********************/
+#define ADC_TR_HT ((uint32_t)0x0FFF0000) /*!< Analog watchdog high threshold */
+#define ADC_TR_LT ((uint32_t)0x00000FFF) /*!< Analog watchdog low threshold */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_HTR_HT ADC_TR_HT /*!< Analog watchdog high threshold */
+#define ADC_LTR_LT ADC_TR_LT /*!< Analog watchdog low threshold */
+
+/****************** Bit definition for ADC_CHSELR register ******************/
+#define ADC_CHSELR_CHSEL18 ((uint32_t)0x00040000) /*!< Channel 18 selection */
+#define ADC_CHSELR_CHSEL17 ((uint32_t)0x00020000) /*!< Channel 17 selection */
+#define ADC_CHSELR_CHSEL16 ((uint32_t)0x00010000) /*!< Channel 16 selection */
+#define ADC_CHSELR_CHSEL15 ((uint32_t)0x00008000) /*!< Channel 15 selection */
+#define ADC_CHSELR_CHSEL14 ((uint32_t)0x00004000) /*!< Channel 14 selection */
+#define ADC_CHSELR_CHSEL13 ((uint32_t)0x00002000) /*!< Channel 13 selection */
+#define ADC_CHSELR_CHSEL12 ((uint32_t)0x00001000) /*!< Channel 12 selection */
+#define ADC_CHSELR_CHSEL11 ((uint32_t)0x00000800) /*!< Channel 11 selection */
+#define ADC_CHSELR_CHSEL10 ((uint32_t)0x00000400) /*!< Channel 10 selection */
+#define ADC_CHSELR_CHSEL9 ((uint32_t)0x00000200) /*!< Channel 9 selection */
+#define ADC_CHSELR_CHSEL8 ((uint32_t)0x00000100) /*!< Channel 8 selection */
+#define ADC_CHSELR_CHSEL7 ((uint32_t)0x00000080) /*!< Channel 7 selection */
+#define ADC_CHSELR_CHSEL6 ((uint32_t)0x00000040) /*!< Channel 6 selection */
+#define ADC_CHSELR_CHSEL5 ((uint32_t)0x00000020) /*!< Channel 5 selection */
+#define ADC_CHSELR_CHSEL4 ((uint32_t)0x00000010) /*!< Channel 4 selection */
+#define ADC_CHSELR_CHSEL3 ((uint32_t)0x00000008) /*!< Channel 3 selection */
+#define ADC_CHSELR_CHSEL2 ((uint32_t)0x00000004) /*!< Channel 2 selection */
+#define ADC_CHSELR_CHSEL1 ((uint32_t)0x00000002) /*!< Channel 1 selection */
+#define ADC_CHSELR_CHSEL0 ((uint32_t)0x00000001) /*!< Channel 0 selection */
+
+/******************** Bit definition for ADC_DR register ********************/
+#define ADC_DR_DATA ((uint32_t)0x0000FFFF) /*!< Regular data */
+
+/******************* Bit definition for ADC_CCR register ********************/
+#define ADC_CCR_VBATEN ((uint32_t)0x01000000) /*!< Voltage battery enable */
+#define ADC_CCR_TSEN ((uint32_t)0x00800000) /*!< Tempurature sensore enable */
+#define ADC_CCR_VREFEN ((uint32_t)0x00400000) /*!< Vrefint enable */
+
+/******************************************************************************/
+/* */
+/* Controller Area Network (CAN ) */
+/* */
+/******************************************************************************/
+/*!<CAN control and status registers */
+/******************* Bit definition for CAN_MCR register ********************/
+#define CAN_MCR_INRQ ((uint32_t)0x00000001) /*!<Initialization Request */
+#define CAN_MCR_SLEEP ((uint32_t)0x00000002) /*!<Sleep Mode Request */
+#define CAN_MCR_TXFP ((uint32_t)0x00000004) /*!<Transmit FIFO Priority */
+#define CAN_MCR_RFLM ((uint32_t)0x00000008) /*!<Receive FIFO Locked Mode */
+#define CAN_MCR_NART ((uint32_t)0x00000010) /*!<No Automatic Retransmission */
+#define CAN_MCR_AWUM ((uint32_t)0x00000020) /*!<Automatic Wakeup Mode */
+#define CAN_MCR_ABOM ((uint32_t)0x00000040) /*!<Automatic Bus-Off Management */
+#define CAN_MCR_TTCM ((uint32_t)0x00000080) /*!<Time Triggered Communication Mode */
+#define CAN_MCR_RESET ((uint32_t)0x00008000) /*!<bxCAN software master reset */
+
+/******************* Bit definition for CAN_MSR register ********************/
+#define CAN_MSR_INAK ((uint32_t)0x00000001) /*!<Initialization Acknowledge */
+#define CAN_MSR_SLAK ((uint32_t)0x00000002) /*!<Sleep Acknowledge */
+#define CAN_MSR_ERRI ((uint32_t)0x00000004) /*!<Error Interrupt */
+#define CAN_MSR_WKUI ((uint32_t)0x00000008) /*!<Wakeup Interrupt */
+#define CAN_MSR_SLAKI ((uint32_t)0x00000010) /*!<Sleep Acknowledge Interrupt */
+#define CAN_MSR_TXM ((uint32_t)0x00000100) /*!<Transmit Mode */
+#define CAN_MSR_RXM ((uint32_t)0x00000200) /*!<Receive Mode */
+#define CAN_MSR_SAMP ((uint32_t)0x00000400) /*!<Last Sample Point */
+#define CAN_MSR_RX ((uint32_t)0x00000800) /*!<CAN Rx Signal */
+
+/******************* Bit definition for CAN_TSR register ********************/
+#define CAN_TSR_RQCP0 ((uint32_t)0x00000001) /*!<Request Completed Mailbox0 */
+#define CAN_TSR_TXOK0 ((uint32_t)0x00000002) /*!<Transmission OK of Mailbox0 */
+#define CAN_TSR_ALST0 ((uint32_t)0x00000004) /*!<Arbitration Lost for Mailbox0 */
+#define CAN_TSR_TERR0 ((uint32_t)0x00000008) /*!<Transmission Error of Mailbox0 */
+#define CAN_TSR_ABRQ0 ((uint32_t)0x00000080) /*!<Abort Request for Mailbox0 */
+#define CAN_TSR_RQCP1 ((uint32_t)0x00000100) /*!<Request Completed Mailbox1 */
+#define CAN_TSR_TXOK1 ((uint32_t)0x00000200) /*!<Transmission OK of Mailbox1 */
+#define CAN_TSR_ALST1 ((uint32_t)0x00000400) /*!<Arbitration Lost for Mailbox1 */
+#define CAN_TSR_TERR1 ((uint32_t)0x00000800) /*!<Transmission Error of Mailbox1 */
+#define CAN_TSR_ABRQ1 ((uint32_t)0x00008000) /*!<Abort Request for Mailbox 1 */
+#define CAN_TSR_RQCP2 ((uint32_t)0x00010000) /*!<Request Completed Mailbox2 */
+#define CAN_TSR_TXOK2 ((uint32_t)0x00020000) /*!<Transmission OK of Mailbox 2 */
+#define CAN_TSR_ALST2 ((uint32_t)0x00040000) /*!<Arbitration Lost for mailbox 2 */
+#define CAN_TSR_TERR2 ((uint32_t)0x00080000) /*!<Transmission Error of Mailbox 2 */
+#define CAN_TSR_ABRQ2 ((uint32_t)0x00800000) /*!<Abort Request for Mailbox 2 */
+#define CAN_TSR_CODE ((uint32_t)0x03000000) /*!<Mailbox Code */
+
+#define CAN_TSR_TME ((uint32_t)0x1C000000) /*!<TME[2:0] bits */
+#define CAN_TSR_TME0 ((uint32_t)0x04000000) /*!<Transmit Mailbox 0 Empty */
+#define CAN_TSR_TME1 ((uint32_t)0x08000000) /*!<Transmit Mailbox 1 Empty */
+#define CAN_TSR_TME2 ((uint32_t)0x10000000) /*!<Transmit Mailbox 2 Empty */
+
+#define CAN_TSR_LOW ((uint32_t)0xE0000000) /*!<LOW[2:0] bits */
+#define CAN_TSR_LOW0 ((uint32_t)0x20000000) /*!<Lowest Priority Flag for Mailbox 0 */
+#define CAN_TSR_LOW1 ((uint32_t)0x40000000) /*!<Lowest Priority Flag for Mailbox 1 */
+#define CAN_TSR_LOW2 ((uint32_t)0x80000000) /*!<Lowest Priority Flag for Mailbox 2 */
+
+/******************* Bit definition for CAN_RF0R register *******************/
+#define CAN_RF0R_FMP0 ((uint32_t)0x00000003) /*!<FIFO 0 Message Pending */
+#define CAN_RF0R_FULL0 ((uint32_t)0x00000008) /*!<FIFO 0 Full */
+#define CAN_RF0R_FOVR0 ((uint32_t)0x00000010) /*!<FIFO 0 Overrun */
+#define CAN_RF0R_RFOM0 ((uint32_t)0x00000020) /*!<Release FIFO 0 Output Mailbox */
+
+/******************* Bit definition for CAN_RF1R register *******************/
+#define CAN_RF1R_FMP1 ((uint32_t)0x00000003) /*!<FIFO 1 Message Pending */
+#define CAN_RF1R_FULL1 ((uint32_t)0x00000008) /*!<FIFO 1 Full */
+#define CAN_RF1R_FOVR1 ((uint32_t)0x00000010) /*!<FIFO 1 Overrun */
+#define CAN_RF1R_RFOM1 ((uint32_t)0x00000020) /*!<Release FIFO 1 Output Mailbox */
+
+/******************** Bit definition for CAN_IER register *******************/
+#define CAN_IER_TMEIE ((uint32_t)0x00000001) /*!<Transmit Mailbox Empty Interrupt Enable */
+#define CAN_IER_FMPIE0 ((uint32_t)0x00000002) /*!<FIFO Message Pending Interrupt Enable */
+#define CAN_IER_FFIE0 ((uint32_t)0x00000004) /*!<FIFO Full Interrupt Enable */
+#define CAN_IER_FOVIE0 ((uint32_t)0x00000008) /*!<FIFO Overrun Interrupt Enable */
+#define CAN_IER_FMPIE1 ((uint32_t)0x00000010) /*!<FIFO Message Pending Interrupt Enable */
+#define CAN_IER_FFIE1 ((uint32_t)0x00000020) /*!<FIFO Full Interrupt Enable */
+#define CAN_IER_FOVIE1 ((uint32_t)0x00000040) /*!<FIFO Overrun Interrupt Enable */
+#define CAN_IER_EWGIE ((uint32_t)0x00000100) /*!<Error Warning Interrupt Enable */
+#define CAN_IER_EPVIE ((uint32_t)0x00000200) /*!<Error Passive Interrupt Enable */
+#define CAN_IER_BOFIE ((uint32_t)0x00000400) /*!<Bus-Off Interrupt Enable */
+#define CAN_IER_LECIE ((uint32_t)0x00000800) /*!<Last Error Code Interrupt Enable */
+#define CAN_IER_ERRIE ((uint32_t)0x00008000) /*!<Error Interrupt Enable */
+#define CAN_IER_WKUIE ((uint32_t)0x00010000) /*!<Wakeup Interrupt Enable */
+#define CAN_IER_SLKIE ((uint32_t)0x00020000) /*!<Sleep Interrupt Enable */
+
+/******************** Bit definition for CAN_ESR register *******************/
+#define CAN_ESR_EWGF ((uint32_t)0x00000001) /*!<Error Warning Flag */
+#define CAN_ESR_EPVF ((uint32_t)0x00000002) /*!<Error Passive Flag */
+#define CAN_ESR_BOFF ((uint32_t)0x00000004) /*!<Bus-Off Flag */
+
+#define CAN_ESR_LEC ((uint32_t)0x00000070) /*!<LEC[2:0] bits (Last Error Code) */
+#define CAN_ESR_LEC_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define CAN_ESR_LEC_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define CAN_ESR_LEC_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define CAN_ESR_TEC ((uint32_t)0x00FF0000) /*!<Least significant byte of the 9-bit Transmit Error Counter */
+#define CAN_ESR_REC ((uint32_t)0xFF000000) /*!<Receive Error Counter */
+
+/******************* Bit definition for CAN_BTR register ********************/
+#define CAN_BTR_BRP ((uint32_t)0x000003FF) /*!<Baud Rate Prescaler */
+#define CAN_BTR_TS1 ((uint32_t)0x000F0000) /*!<Time Segment 1 */
+#define CAN_BTR_TS1_0 ((uint32_t)0x00010000) /*!<Time Segment 1 (Bit 0) */
+#define CAN_BTR_TS1_1 ((uint32_t)0x00020000) /*!<Time Segment 1 (Bit 1) */
+#define CAN_BTR_TS1_2 ((uint32_t)0x00040000) /*!<Time Segment 1 (Bit 2) */
+#define CAN_BTR_TS1_3 ((uint32_t)0x00080000) /*!<Time Segment 1 (Bit 3) */
+#define CAN_BTR_TS2 ((uint32_t)0x00700000) /*!<Time Segment 2 */
+#define CAN_BTR_TS2_0 ((uint32_t)0x00100000) /*!<Time Segment 2 (Bit 0) */
+#define CAN_BTR_TS2_1 ((uint32_t)0x00200000) /*!<Time Segment 2 (Bit 1) */
+#define CAN_BTR_TS2_2 ((uint32_t)0x00400000) /*!<Time Segment 2 (Bit 2) */
+#define CAN_BTR_SJW ((uint32_t)0x03000000) /*!<Resynchronization Jump Width */
+#define CAN_BTR_SJW_0 ((uint32_t)0x01000000) /*!<Resynchronization Jump Width (Bit 0) */
+#define CAN_BTR_SJW_1 ((uint32_t)0x02000000) /*!<Resynchronization Jump Width (Bit 1) */
+#define CAN_BTR_LBKM ((uint32_t)0x40000000) /*!<Loop Back Mode (Debug) */
+#define CAN_BTR_SILM ((uint32_t)0x80000000) /*!<Silent Mode */
+
+/*!<Mailbox registers */
+/****************** Bit definition for CAN_TI0R register ********************/
+#define CAN_TI0R_TXRQ ((uint32_t)0x00000001) /*!<Transmit Mailbox Request */
+#define CAN_TI0R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_TI0R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_TI0R_EXID ((uint32_t)0x001FFFF8) /*!<Extended Identifier */
+#define CAN_TI0R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/****************** Bit definition for CAN_TDT0R register *******************/
+#define CAN_TDT0R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_TDT0R_TGT ((uint32_t)0x00000100) /*!<Transmit Global Time */
+#define CAN_TDT0R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/****************** Bit definition for CAN_TDL0R register *******************/
+#define CAN_TDL0R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_TDL0R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_TDL0R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_TDL0R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/****************** Bit definition for CAN_TDH0R register *******************/
+#define CAN_TDH0R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_TDH0R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_TDH0R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_TDH0R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/******************* Bit definition for CAN_TI1R register *******************/
+#define CAN_TI1R_TXRQ ((uint32_t)0x00000001) /*!<Transmit Mailbox Request */
+#define CAN_TI1R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_TI1R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_TI1R_EXID ((uint32_t)0x001FFFF8) /*!<Extended Identifier */
+#define CAN_TI1R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/******************* Bit definition for CAN_TDT1R register ******************/
+#define CAN_TDT1R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_TDT1R_TGT ((uint32_t)0x00000100) /*!<Transmit Global Time */
+#define CAN_TDT1R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/******************* Bit definition for CAN_TDL1R register ******************/
+#define CAN_TDL1R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_TDL1R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_TDL1R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_TDL1R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/******************* Bit definition for CAN_TDH1R register ******************/
+#define CAN_TDH1R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_TDH1R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_TDH1R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_TDH1R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/******************* Bit definition for CAN_TI2R register *******************/
+#define CAN_TI2R_TXRQ ((uint32_t)0x00000001) /*!<Transmit Mailbox Request */
+#define CAN_TI2R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_TI2R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_TI2R_EXID ((uint32_t)0x001FFFF8) /*!<Extended identifier */
+#define CAN_TI2R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/******************* Bit definition for CAN_TDT2R register ******************/
+#define CAN_TDT2R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_TDT2R_TGT ((uint32_t)0x00000100) /*!<Transmit Global Time */
+#define CAN_TDT2R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/******************* Bit definition for CAN_TDL2R register ******************/
+#define CAN_TDL2R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_TDL2R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_TDL2R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_TDL2R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/******************* Bit definition for CAN_TDH2R register ******************/
+#define CAN_TDH2R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_TDH2R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_TDH2R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_TDH2R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/******************* Bit definition for CAN_RI0R register *******************/
+#define CAN_RI0R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_RI0R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_RI0R_EXID ((uint32_t)0x001FFFF8) /*!<Extended Identifier */
+#define CAN_RI0R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/******************* Bit definition for CAN_RDT0R register ******************/
+#define CAN_RDT0R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_RDT0R_FMI ((uint32_t)0x0000FF00) /*!<Filter Match Index */
+#define CAN_RDT0R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/******************* Bit definition for CAN_RDL0R register ******************/
+#define CAN_RDL0R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_RDL0R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_RDL0R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_RDL0R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/******************* Bit definition for CAN_RDH0R register ******************/
+#define CAN_RDH0R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_RDH0R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_RDH0R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_RDH0R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/******************* Bit definition for CAN_RI1R register *******************/
+#define CAN_RI1R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_RI1R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_RI1R_EXID ((uint32_t)0x001FFFF8) /*!<Extended identifier */
+#define CAN_RI1R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/******************* Bit definition for CAN_RDT1R register ******************/
+#define CAN_RDT1R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_RDT1R_FMI ((uint32_t)0x0000FF00) /*!<Filter Match Index */
+#define CAN_RDT1R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/******************* Bit definition for CAN_RDL1R register ******************/
+#define CAN_RDL1R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_RDL1R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_RDL1R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_RDL1R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/******************* Bit definition for CAN_RDH1R register ******************/
+#define CAN_RDH1R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_RDH1R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_RDH1R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_RDH1R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/*!<CAN filter registers */
+/******************* Bit definition for CAN_FMR register ********************/
+#define CAN_FMR_FINIT ((uint32_t)0x00000001) /*!<Filter Init Mode */
+
+/******************* Bit definition for CAN_FM1R register *******************/
+#define CAN_FM1R_FBM ((uint32_t)0x00003FFF) /*!<Filter Mode */
+#define CAN_FM1R_FBM0 ((uint32_t)0x00000001) /*!<Filter Init Mode bit 0 */
+#define CAN_FM1R_FBM1 ((uint32_t)0x00000002) /*!<Filter Init Mode bit 1 */
+#define CAN_FM1R_FBM2 ((uint32_t)0x00000004) /*!<Filter Init Mode bit 2 */
+#define CAN_FM1R_FBM3 ((uint32_t)0x00000008) /*!<Filter Init Mode bit 3 */
+#define CAN_FM1R_FBM4 ((uint32_t)0x00000010) /*!<Filter Init Mode bit 4 */
+#define CAN_FM1R_FBM5 ((uint32_t)0x00000020) /*!<Filter Init Mode bit 5 */
+#define CAN_FM1R_FBM6 ((uint32_t)0x00000040) /*!<Filter Init Mode bit 6 */
+#define CAN_FM1R_FBM7 ((uint32_t)0x00000080) /*!<Filter Init Mode bit 7 */
+#define CAN_FM1R_FBM8 ((uint32_t)0x00000100) /*!<Filter Init Mode bit 8 */
+#define CAN_FM1R_FBM9 ((uint32_t)0x00000200) /*!<Filter Init Mode bit 9 */
+#define CAN_FM1R_FBM10 ((uint32_t)0x00000400) /*!<Filter Init Mode bit 10 */
+#define CAN_FM1R_FBM11 ((uint32_t)0x00000800) /*!<Filter Init Mode bit 11 */
+#define CAN_FM1R_FBM12 ((uint32_t)0x00001000) /*!<Filter Init Mode bit 12 */
+#define CAN_FM1R_FBM13 ((uint32_t)0x00002000) /*!<Filter Init Mode bit 13 */
+
+/******************* Bit definition for CAN_FS1R register *******************/
+#define CAN_FS1R_FSC ((uint32_t)0x00003FFF) /*!<Filter Scale Configuration */
+#define CAN_FS1R_FSC0 ((uint32_t)0x00000001) /*!<Filter Scale Configuration bit 0 */
+#define CAN_FS1R_FSC1 ((uint32_t)0x00000002) /*!<Filter Scale Configuration bit 1 */
+#define CAN_FS1R_FSC2 ((uint32_t)0x00000004) /*!<Filter Scale Configuration bit 2 */
+#define CAN_FS1R_FSC3 ((uint32_t)0x00000008) /*!<Filter Scale Configuration bit 3 */
+#define CAN_FS1R_FSC4 ((uint32_t)0x00000010) /*!<Filter Scale Configuration bit 4 */
+#define CAN_FS1R_FSC5 ((uint32_t)0x00000020) /*!<Filter Scale Configuration bit 5 */
+#define CAN_FS1R_FSC6 ((uint32_t)0x00000040) /*!<Filter Scale Configuration bit 6 */
+#define CAN_FS1R_FSC7 ((uint32_t)0x00000080) /*!<Filter Scale Configuration bit 7 */
+#define CAN_FS1R_FSC8 ((uint32_t)0x00000100) /*!<Filter Scale Configuration bit 8 */
+#define CAN_FS1R_FSC9 ((uint32_t)0x00000200) /*!<Filter Scale Configuration bit 9 */
+#define CAN_FS1R_FSC10 ((uint32_t)0x00000400) /*!<Filter Scale Configuration bit 10 */
+#define CAN_FS1R_FSC11 ((uint32_t)0x00000800) /*!<Filter Scale Configuration bit 11 */
+#define CAN_FS1R_FSC12 ((uint32_t)0x00001000) /*!<Filter Scale Configuration bit 12 */
+#define CAN_FS1R_FSC13 ((uint32_t)0x00002000) /*!<Filter Scale Configuration bit 13 */
+
+/****************** Bit definition for CAN_FFA1R register *******************/
+#define CAN_FFA1R_FFA ((uint32_t)0x00003FFF) /*!<Filter FIFO Assignment */
+#define CAN_FFA1R_FFA0 ((uint32_t)0x00000001) /*!<Filter FIFO Assignment for Filter 0 */
+#define CAN_FFA1R_FFA1 ((uint32_t)0x00000002) /*!<Filter FIFO Assignment for Filter 1 */
+#define CAN_FFA1R_FFA2 ((uint32_t)0x00000004) /*!<Filter FIFO Assignment for Filter 2 */
+#define CAN_FFA1R_FFA3 ((uint32_t)0x00000008) /*!<Filter FIFO Assignment for Filter 3 */
+#define CAN_FFA1R_FFA4 ((uint32_t)0x00000010) /*!<Filter FIFO Assignment for Filter 4 */
+#define CAN_FFA1R_FFA5 ((uint32_t)0x00000020) /*!<Filter FIFO Assignment for Filter 5 */
+#define CAN_FFA1R_FFA6 ((uint32_t)0x00000040) /*!<Filter FIFO Assignment for Filter 6 */
+#define CAN_FFA1R_FFA7 ((uint32_t)0x00000080) /*!<Filter FIFO Assignment for Filter 7 */
+#define CAN_FFA1R_FFA8 ((uint32_t)0x00000100) /*!<Filter FIFO Assignment for Filter 8 */
+#define CAN_FFA1R_FFA9 ((uint32_t)0x00000200) /*!<Filter FIFO Assignment for Filter 9 */
+#define CAN_FFA1R_FFA10 ((uint32_t)0x00000400) /*!<Filter FIFO Assignment for Filter 10 */
+#define CAN_FFA1R_FFA11 ((uint32_t)0x00000800) /*!<Filter FIFO Assignment for Filter 11 */
+#define CAN_FFA1R_FFA12 ((uint32_t)0x00001000) /*!<Filter FIFO Assignment for Filter 12 */
+#define CAN_FFA1R_FFA13 ((uint32_t)0x00002000) /*!<Filter FIFO Assignment for Filter 13 */
+
+/******************* Bit definition for CAN_FA1R register *******************/
+#define CAN_FA1R_FACT ((uint32_t)0x00003FFF) /*!<Filter Active */
+#define CAN_FA1R_FACT0 ((uint32_t)0x00000001) /*!<Filter 0 Active */
+#define CAN_FA1R_FACT1 ((uint32_t)0x00000002) /*!<Filter 1 Active */
+#define CAN_FA1R_FACT2 ((uint32_t)0x00000004) /*!<Filter 2 Active */
+#define CAN_FA1R_FACT3 ((uint32_t)0x00000008) /*!<Filter 3 Active */
+#define CAN_FA1R_FACT4 ((uint32_t)0x00000010) /*!<Filter 4 Active */
+#define CAN_FA1R_FACT5 ((uint32_t)0x00000020) /*!<Filter 5 Active */
+#define CAN_FA1R_FACT6 ((uint32_t)0x00000040) /*!<Filter 6 Active */
+#define CAN_FA1R_FACT7 ((uint32_t)0x00000080) /*!<Filter 7 Active */
+#define CAN_FA1R_FACT8 ((uint32_t)0x00000100) /*!<Filter 8 Active */
+#define CAN_FA1R_FACT9 ((uint32_t)0x00000200) /*!<Filter 9 Active */
+#define CAN_FA1R_FACT10 ((uint32_t)0x00000400) /*!<Filter 10 Active */
+#define CAN_FA1R_FACT11 ((uint32_t)0x00000800) /*!<Filter 11 Active */
+#define CAN_FA1R_FACT12 ((uint32_t)0x00001000) /*!<Filter 12 Active */
+#define CAN_FA1R_FACT13 ((uint32_t)0x00002000) /*!<Filter 13 Active */
+
+/******************* Bit definition for CAN_F0R1 register *******************/
+#define CAN_F0R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F0R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F0R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F0R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F0R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F0R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F0R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F0R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F0R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F0R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F0R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F0R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F0R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F0R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F0R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F0R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F0R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F0R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F0R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F0R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F0R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F0R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F0R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F0R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F0R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F0R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F0R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F0R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F0R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F0R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F0R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F0R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F1R1 register *******************/
+#define CAN_F1R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F1R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F1R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F1R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F1R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F1R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F1R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F1R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F1R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F1R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F1R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F1R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F1R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F1R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F1R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F1R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F1R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F1R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F1R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F1R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F1R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F1R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F1R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F1R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F1R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F1R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F1R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F1R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F1R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F1R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F1R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F1R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F2R1 register *******************/
+#define CAN_F2R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F2R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F2R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F2R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F2R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F2R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F2R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F2R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F2R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F2R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F2R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F2R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F2R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F2R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F2R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F2R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F2R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F2R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F2R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F2R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F2R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F2R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F2R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F2R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F2R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F2R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F2R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F2R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F2R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F2R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F2R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F2R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F3R1 register *******************/
+#define CAN_F3R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F3R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F3R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F3R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F3R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F3R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F3R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F3R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F3R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F3R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F3R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F3R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F3R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F3R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F3R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F3R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F3R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F3R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F3R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F3R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F3R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F3R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F3R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F3R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F3R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F3R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F3R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F3R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F3R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F3R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F3R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F3R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F4R1 register *******************/
+#define CAN_F4R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F4R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F4R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F4R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F4R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F4R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F4R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F4R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F4R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F4R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F4R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F4R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F4R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F4R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F4R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F4R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F4R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F4R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F4R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F4R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F4R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F4R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F4R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F4R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F4R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F4R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F4R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F4R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F4R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F4R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F4R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F4R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F5R1 register *******************/
+#define CAN_F5R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F5R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F5R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F5R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F5R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F5R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F5R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F5R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F5R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F5R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F5R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F5R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F5R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F5R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F5R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F5R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F5R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F5R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F5R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F5R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F5R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F5R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F5R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F5R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F5R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F5R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F5R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F5R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F5R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F5R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F5R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F5R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F6R1 register *******************/
+#define CAN_F6R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F6R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F6R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F6R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F6R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F6R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F6R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F6R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F6R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F6R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F6R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F6R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F6R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F6R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F6R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F6R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F6R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F6R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F6R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F6R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F6R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F6R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F6R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F6R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F6R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F6R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F6R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F6R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F6R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F6R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F6R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F6R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F7R1 register *******************/
+#define CAN_F7R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F7R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F7R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F7R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F7R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F7R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F7R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F7R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F7R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F7R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F7R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F7R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F7R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F7R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F7R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F7R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F7R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F7R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F7R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F7R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F7R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F7R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F7R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F7R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F7R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F7R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F7R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F7R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F7R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F7R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F7R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F7R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F8R1 register *******************/
+#define CAN_F8R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F8R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F8R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F8R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F8R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F8R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F8R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F8R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F8R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F8R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F8R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F8R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F8R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F8R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F8R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F8R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F8R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F8R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F8R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F8R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F8R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F8R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F8R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F8R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F8R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F8R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F8R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F8R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F8R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F8R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F8R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F8R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F9R1 register *******************/
+#define CAN_F9R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F9R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F9R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F9R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F9R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F9R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F9R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F9R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F9R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F9R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F9R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F9R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F9R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F9R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F9R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F9R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F9R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F9R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F9R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F9R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F9R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F9R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F9R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F9R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F9R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F9R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F9R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F9R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F9R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F9R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F9R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F9R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F10R1 register ******************/
+#define CAN_F10R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F10R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F10R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F10R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F10R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F10R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F10R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F10R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F10R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F10R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F10R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F10R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F10R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F10R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F10R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F10R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F10R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F10R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F10R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F10R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F10R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F10R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F10R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F10R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F10R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F10R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F10R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F10R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F10R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F10R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F10R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F10R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F11R1 register ******************/
+#define CAN_F11R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F11R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F11R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F11R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F11R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F11R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F11R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F11R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F11R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F11R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F11R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F11R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F11R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F11R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F11R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F11R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F11R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F11R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F11R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F11R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F11R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F11R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F11R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F11R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F11R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F11R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F11R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F11R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F11R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F11R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F11R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F11R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F12R1 register ******************/
+#define CAN_F12R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F12R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F12R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F12R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F12R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F12R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F12R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F12R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F12R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F12R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F12R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F12R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F12R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F12R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F12R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F12R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F12R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F12R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F12R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F12R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F12R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F12R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F12R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F12R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F12R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F12R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F12R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F12R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F12R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F12R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F12R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F12R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F13R1 register ******************/
+#define CAN_F13R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F13R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F13R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F13R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F13R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F13R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F13R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F13R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F13R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F13R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F13R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F13R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F13R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F13R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F13R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F13R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F13R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F13R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F13R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F13R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F13R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F13R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F13R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F13R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F13R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F13R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F13R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F13R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F13R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F13R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F13R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F13R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F0R2 register *******************/
+#define CAN_F0R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F0R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F0R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F0R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F0R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F0R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F0R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F0R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F0R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F0R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F0R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F0R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F0R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F0R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F0R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F0R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F0R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F0R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F0R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F0R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F0R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F0R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F0R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F0R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F0R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F0R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F0R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F0R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F0R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F0R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F0R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F0R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F1R2 register *******************/
+#define CAN_F1R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F1R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F1R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F1R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F1R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F1R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F1R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F1R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F1R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F1R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F1R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F1R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F1R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F1R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F1R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F1R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F1R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F1R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F1R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F1R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F1R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F1R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F1R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F1R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F1R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F1R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F1R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F1R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F1R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F1R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F1R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F1R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F2R2 register *******************/
+#define CAN_F2R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F2R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F2R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F2R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F2R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F2R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F2R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F2R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F2R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F2R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F2R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F2R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F2R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F2R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F2R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F2R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F2R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F2R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F2R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F2R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F2R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F2R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F2R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F2R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F2R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F2R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F2R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F2R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F2R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F2R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F2R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F2R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F3R2 register *******************/
+#define CAN_F3R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F3R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F3R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F3R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F3R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F3R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F3R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F3R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F3R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F3R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F3R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F3R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F3R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F3R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F3R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F3R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F3R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F3R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F3R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F3R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F3R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F3R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F3R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F3R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F3R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F3R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F3R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F3R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F3R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F3R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F3R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F3R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F4R2 register *******************/
+#define CAN_F4R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F4R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F4R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F4R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F4R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F4R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F4R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F4R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F4R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F4R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F4R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F4R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F4R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F4R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F4R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F4R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F4R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F4R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F4R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F4R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F4R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F4R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F4R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F4R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F4R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F4R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F4R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F4R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F4R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F4R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F4R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F4R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F5R2 register *******************/
+#define CAN_F5R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F5R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F5R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F5R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F5R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F5R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F5R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F5R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F5R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F5R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F5R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F5R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F5R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F5R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F5R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F5R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F5R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F5R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F5R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F5R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F5R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F5R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F5R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F5R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F5R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F5R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F5R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F5R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F5R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F5R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F5R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F5R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F6R2 register *******************/
+#define CAN_F6R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F6R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F6R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F6R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F6R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F6R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F6R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F6R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F6R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F6R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F6R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F6R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F6R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F6R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F6R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F6R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F6R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F6R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F6R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F6R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F6R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F6R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F6R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F6R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F6R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F6R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F6R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F6R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F6R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F6R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F6R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F6R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F7R2 register *******************/
+#define CAN_F7R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F7R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F7R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F7R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F7R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F7R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F7R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F7R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F7R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F7R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F7R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F7R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F7R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F7R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F7R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F7R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F7R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F7R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F7R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F7R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F7R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F7R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F7R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F7R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F7R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F7R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F7R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F7R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F7R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F7R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F7R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F7R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F8R2 register *******************/
+#define CAN_F8R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F8R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F8R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F8R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F8R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F8R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F8R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F8R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F8R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F8R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F8R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F8R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F8R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F8R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F8R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F8R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F8R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F8R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F8R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F8R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F8R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F8R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F8R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F8R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F8R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F8R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F8R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F8R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F8R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F8R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F8R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F8R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F9R2 register *******************/
+#define CAN_F9R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F9R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F9R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F9R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F9R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F9R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F9R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F9R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F9R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F9R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F9R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F9R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F9R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F9R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F9R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F9R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F9R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F9R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F9R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F9R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F9R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F9R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F9R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F9R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F9R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F9R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F9R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F9R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F9R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F9R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F9R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F9R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F10R2 register ******************/
+#define CAN_F10R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F10R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F10R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F10R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F10R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F10R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F10R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F10R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F10R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F10R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F10R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F10R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F10R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F10R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F10R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F10R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F10R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F10R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F10R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F10R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F10R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F10R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F10R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F10R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F10R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F10R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F10R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F10R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F10R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F10R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F10R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F10R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F11R2 register ******************/
+#define CAN_F11R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F11R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F11R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F11R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F11R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F11R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F11R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F11R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F11R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F11R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F11R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F11R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F11R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F11R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F11R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F11R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F11R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F11R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F11R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F11R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F11R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F11R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F11R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F11R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F11R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F11R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F11R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F11R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F11R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F11R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F11R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F11R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F12R2 register ******************/
+#define CAN_F12R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F12R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F12R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F12R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F12R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F12R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F12R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F12R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F12R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F12R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F12R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F12R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F12R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F12R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F12R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F12R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F12R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F12R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F12R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F12R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F12R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F12R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F12R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F12R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F12R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F12R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F12R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F12R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F12R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F12R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F12R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F12R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F13R2 register ******************/
+#define CAN_F13R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F13R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F13R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F13R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F13R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F13R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F13R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F13R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F13R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F13R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F13R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F13R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F13R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F13R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F13R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F13R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F13R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F13R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F13R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F13R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F13R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F13R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F13R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F13R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F13R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F13R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F13R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F13R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F13R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F13R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F13R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F13R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************************************************************************/
+/* */
+/* HDMI-CEC (CEC) */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for CEC_CR register *********************/
+#define CEC_CR_CECEN ((uint32_t)0x00000001) /*!< CEC Enable */
+#define CEC_CR_TXSOM ((uint32_t)0x00000002) /*!< CEC Tx Start Of Message */
+#define CEC_CR_TXEOM ((uint32_t)0x00000004) /*!< CEC Tx End Of Message */
+
+/******************* Bit definition for CEC_CFGR register *******************/
+#define CEC_CFGR_SFT ((uint32_t)0x00000007) /*!< CEC Signal Free Time */
+#define CEC_CFGR_RXTOL ((uint32_t)0x00000008) /*!< CEC Tolerance */
+#define CEC_CFGR_BRESTP ((uint32_t)0x00000010) /*!< CEC Rx Stop */
+#define CEC_CFGR_BREGEN ((uint32_t)0x00000020) /*!< CEC Bit Rising Error generation */
+#define CEC_CFGR_LBPEGEN ((uint32_t)0x00000040) /*!< CEC Long Bit Period Error gener. */
+#define CEC_CFGR_BRDNOGEN ((uint32_t)0x00000080) /*!< CEC Broadcast No Error generation */
+#define CEC_CFGR_SFTOPT ((uint32_t)0x00000100) /*!< CEC Signal Free Time optional */
+#define CEC_CFGR_OAR ((uint32_t)0x7FFF0000) /*!< CEC Own Address */
+#define CEC_CFGR_LSTN ((uint32_t)0x80000000) /*!< CEC Listen mode */
+
+/******************* Bit definition for CEC_TXDR register *******************/
+#define CEC_TXDR_TXD ((uint32_t)0x000000FF) /*!< CEC Tx Data */
+
+/******************* Bit definition for CEC_RXDR register *******************/
+#define CEC_TXDR_RXD ((uint32_t)0x000000FF) /*!< CEC Rx Data */
+
+/******************* Bit definition for CEC_ISR register ********************/
+#define CEC_ISR_RXBR ((uint32_t)0x00000001) /*!< CEC Rx-Byte Received */
+#define CEC_ISR_RXEND ((uint32_t)0x00000002) /*!< CEC End Of Reception */
+#define CEC_ISR_RXOVR ((uint32_t)0x00000004) /*!< CEC Rx-Overrun */
+#define CEC_ISR_BRE ((uint32_t)0x00000008) /*!< CEC Rx Bit Rising Error */
+#define CEC_ISR_SBPE ((uint32_t)0x00000010) /*!< CEC Rx Short Bit period Error */
+#define CEC_ISR_LBPE ((uint32_t)0x00000020) /*!< CEC Rx Long Bit period Error */
+#define CEC_ISR_RXACKE ((uint32_t)0x00000040) /*!< CEC Rx Missing Acknowledge */
+#define CEC_ISR_ARBLST ((uint32_t)0x00000080) /*!< CEC Arbitration Lost */
+#define CEC_ISR_TXBR ((uint32_t)0x00000100) /*!< CEC Tx Byte Request */
+#define CEC_ISR_TXEND ((uint32_t)0x00000200) /*!< CEC End of Transmission */
+#define CEC_ISR_TXUDR ((uint32_t)0x00000400) /*!< CEC Tx-Buffer Underrun */
+#define CEC_ISR_TXERR ((uint32_t)0x00000800) /*!< CEC Tx-Error */
+#define CEC_ISR_TXACKE ((uint32_t)0x00001000) /*!< CEC Tx Missing Acknowledge */
+
+/******************* Bit definition for CEC_IER register ********************/
+#define CEC_IER_RXBRIE ((uint32_t)0x00000001) /*!< CEC Rx-Byte Received IT Enable */
+#define CEC_IER_RXENDIE ((uint32_t)0x00000002) /*!< CEC End Of Reception IT Enable */
+#define CEC_IER_RXOVRIE ((uint32_t)0x00000004) /*!< CEC Rx-Overrun IT Enable */
+#define CEC_IER_BREIE ((uint32_t)0x00000008) /*!< CEC Rx Bit Rising Error IT Enable */
+#define CEC_IER_SBPEIE ((uint32_t)0x00000010) /*!< CEC Rx Short Bit period Error IT Enable*/
+#define CEC_IER_LBPEIE ((uint32_t)0x00000020) /*!< CEC Rx Long Bit period Error IT Enable */
+#define CEC_IER_RXACKEIE ((uint32_t)0x00000040) /*!< CEC Rx Missing Acknowledge IT Enable */
+#define CEC_IER_ARBLSTIE ((uint32_t)0x00000080) /*!< CEC Arbitration Lost IT Enable */
+#define CEC_IER_TXBRIE ((uint32_t)0x00000100) /*!< CEC Tx Byte Request IT Enable */
+#define CEC_IER_TXENDIE ((uint32_t)0x00000200) /*!< CEC End of Transmission IT Enable */
+#define CEC_IER_TXUDRIE ((uint32_t)0x00000400) /*!< CEC Tx-Buffer Underrun IT Enable */
+#define CEC_IER_TXERRIE ((uint32_t)0x00000800) /*!< CEC Tx-Error IT Enable */
+#define CEC_IER_TXACKEIE ((uint32_t)0x00001000) /*!< CEC Tx Missing Acknowledge IT Enable */
+
+
+/******************************************************************************/
+/* */
+/* Analog Comparators (COMP) */
+/* */
+/******************************************************************************/
+/*********************** Bit definition for COMP_CSR register ***************/
+/* COMP1 bits definition */
+#define COMP_CSR_COMP1EN ((uint32_t)0x00000001) /*!< COMP1 enable */
+#define COMP_CSR_COMP1SW1 ((uint32_t)0x00000002) /*!< SW1 switch control */
+#define COMP_CSR_COMP1MODE ((uint32_t)0x0000000C) /*!< COMP1 power mode */
+#define COMP_CSR_COMP1MODE_0 ((uint32_t)0x00000004) /*!< COMP1 power mode bit 0 */
+#define COMP_CSR_COMP1MODE_1 ((uint32_t)0x00000008) /*!< COMP1 power mode bit 1 */
+#define COMP_CSR_COMP1INSEL ((uint32_t)0x00000070) /*!< COMP1 inverting input select */
+#define COMP_CSR_COMP1INSEL_0 ((uint32_t)0x00000010) /*!< COMP1 inverting input select bit 0 */
+#define COMP_CSR_COMP1INSEL_1 ((uint32_t)0x00000020) /*!< COMP1 inverting input select bit 1 */
+#define COMP_CSR_COMP1INSEL_2 ((uint32_t)0x00000040) /*!< COMP1 inverting input select bit 2 */
+#define COMP_CSR_COMP1OUTSEL ((uint32_t)0x00000700) /*!< COMP1 output select */
+#define COMP_CSR_COMP1OUTSEL_0 ((uint32_t)0x00000100) /*!< COMP1 output select bit 0 */
+#define COMP_CSR_COMP1OUTSEL_1 ((uint32_t)0x00000200) /*!< COMP1 output select bit 1 */
+#define COMP_CSR_COMP1OUTSEL_2 ((uint32_t)0x00000400) /*!< COMP1 output select bit 2 */
+#define COMP_CSR_COMP1POL ((uint32_t)0x00000800) /*!< COMP1 output polarity */
+#define COMP_CSR_COMP1HYST ((uint32_t)0x00003000) /*!< COMP1 hysteresis */
+#define COMP_CSR_COMP1HYST_0 ((uint32_t)0x00001000) /*!< COMP1 hysteresis bit 0 */
+#define COMP_CSR_COMP1HYST_1 ((uint32_t)0x00002000) /*!< COMP1 hysteresis bit 1 */
+#define COMP_CSR_COMP1OUT ((uint32_t)0x00004000) /*!< COMP1 output level */
+#define COMP_CSR_COMP1LOCK ((uint32_t)0x00008000) /*!< COMP1 lock */
+/* COMP2 bits definition */
+#define COMP_CSR_COMP2EN ((uint32_t)0x00010000) /*!< COMP2 enable */
+#define COMP_CSR_COMP2MODE ((uint32_t)0x000C0000) /*!< COMP2 power mode */
+#define COMP_CSR_COMP2MODE_0 ((uint32_t)0x00040000) /*!< COMP2 power mode bit 0 */
+#define COMP_CSR_COMP2MODE_1 ((uint32_t)0x00080000) /*!< COMP2 power mode bit 1 */
+#define COMP_CSR_COMP2INSEL ((uint32_t)0x00700000) /*!< COMP2 inverting input select */
+#define COMP_CSR_COMP2INSEL_0 ((uint32_t)0x00100000) /*!< COMP2 inverting input select bit 0 */
+#define COMP_CSR_COMP2INSEL_1 ((uint32_t)0x00200000) /*!< COMP2 inverting input select bit 1 */
+#define COMP_CSR_COMP2INSEL_2 ((uint32_t)0x00400000) /*!< COMP2 inverting input select bit 2 */
+#define COMP_CSR_WNDWEN ((uint32_t)0x00800000) /*!< Comparators window mode enable */
+#define COMP_CSR_COMP2OUTSEL ((uint32_t)0x07000000) /*!< COMP2 output select */
+#define COMP_CSR_COMP2OUTSEL_0 ((uint32_t)0x01000000) /*!< COMP2 output select bit 0 */
+#define COMP_CSR_COMP2OUTSEL_1 ((uint32_t)0x02000000) /*!< COMP2 output select bit 1 */
+#define COMP_CSR_COMP2OUTSEL_2 ((uint32_t)0x04000000) /*!< COMP2 output select bit 2 */
+#define COMP_CSR_COMP2POL ((uint32_t)0x08000000) /*!< COMP2 output polarity */
+#define COMP_CSR_COMP2HYST ((uint32_t)0x30000000) /*!< COMP2 hysteresis */
+#define COMP_CSR_COMP2HYST_0 ((uint32_t)0x10000000) /*!< COMP2 hysteresis bit 0 */
+#define COMP_CSR_COMP2HYST_1 ((uint32_t)0x20000000) /*!< COMP2 hysteresis bit 1 */
+#define COMP_CSR_COMP2OUT ((uint32_t)0x40000000) /*!< COMP2 output level */
+#define COMP_CSR_COMP2LOCK ((uint32_t)0x80000000) /*!< COMP2 lock */
+/* COMPx bits definition */
+#define COMP_CSR_COMPxEN ((uint16_t)0x0001) /*!< COMPx enable */
+#define COMP_CSR_COMPxMODE ((uint16_t)0x000C) /*!< COMPx power mode */
+#define COMP_CSR_COMPxMODE_0 ((uint16_t)0x0004) /*!< COMPx power mode bit 0 */
+#define COMP_CSR_COMPxMODE_1 ((uint16_t)0x0008) /*!< COMPx power mode bit 1 */
+#define COMP_CSR_COMPxINSEL ((uint16_t)0x0070) /*!< COMPx inverting input select */
+#define COMP_CSR_COMPxINSEL_0 ((uint16_t)0x0010) /*!< COMPx inverting input select bit 0 */
+#define COMP_CSR_COMPxINSEL_1 ((uint16_t)0x0020) /*!< COMPx inverting input select bit 1 */
+#define COMP_CSR_COMPxINSEL_2 ((uint16_t)0x0040) /*!< COMPx inverting input select bit 2 */
+#define COMP_CSR_COMPxOUTSEL ((uint16_t)0x0700) /*!< COMPx output select */
+#define COMP_CSR_COMPxOUTSEL_0 ((uint16_t)0x0100) /*!< COMPx output select bit 0 */
+#define COMP_CSR_COMPxOUTSEL_1 ((uint16_t)0x0200) /*!< COMPx output select bit 1 */
+#define COMP_CSR_COMPxOUTSEL_2 ((uint16_t)0x0400) /*!< COMPx output select bit 2 */
+#define COMP_CSR_COMPxPOL ((uint16_t)0x0800) /*!< COMPx output polarity */
+#define COMP_CSR_COMPxHYST ((uint16_t)0x3000) /*!< COMPx hysteresis */
+#define COMP_CSR_COMPxHYST_0 ((uint16_t)0x1000) /*!< COMPx hysteresis bit 0 */
+#define COMP_CSR_COMPxHYST_1 ((uint16_t)0x2000) /*!< COMPx hysteresis bit 1 */
+#define COMP_CSR_COMPxOUT ((uint16_t)0x4000) /*!< COMPx output level */
+#define COMP_CSR_COMPxLOCK ((uint16_t)0x8000) /*!< COMPx lock */
+
+/******************************************************************************/
+/* */
+/* CRC calculation unit (CRC) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for CRC_DR register *********************/
+#define CRC_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data register bits */
+
+/******************* Bit definition for CRC_IDR register ********************/
+#define CRC_IDR_IDR ((uint8_t)0xFF) /*!< General-purpose 8-bit data register bits */
+
+/******************** Bit definition for CRC_CR register ********************/
+#define CRC_CR_RESET ((uint32_t)0x00000001) /*!< RESET the CRC computation unit bit */
+#define CRC_CR_POLYSIZE ((uint32_t)0x00000018) /*!< Polynomial size bits */
+#define CRC_CR_POLYSIZE_0 ((uint32_t)0x00000008) /*!< Polynomial size bit 0 */
+#define CRC_CR_POLYSIZE_1 ((uint32_t)0x00000010) /*!< Polynomial size bit 1 */
+#define CRC_CR_REV_IN ((uint32_t)0x00000060) /*!< REV_IN Reverse Input Data bits */
+#define CRC_CR_REV_IN_0 ((uint32_t)0x00000020) /*!< REV_IN Bit 0 */
+#define CRC_CR_REV_IN_1 ((uint32_t)0x00000040) /*!< REV_IN Bit 1 */
+#define CRC_CR_REV_OUT ((uint32_t)0x00000080) /*!< REV_OUT Reverse Output Data bits */
+
+/******************* Bit definition for CRC_INIT register *******************/
+#define CRC_INIT_INIT ((uint32_t)0xFFFFFFFF) /*!< Initial CRC value bits */
+
+/******************* Bit definition for CRC_POL register ********************/
+#define CRC_POL_POL ((uint32_t)0xFFFFFFFF) /*!< Coefficients of the polynomial */
+
+/******************************************************************************/
+/* */
+/* CRS Clock Recovery System */
+/******************************************************************************/
+
+/******************* Bit definition for CRS_CR register *********************/
+#define CRS_CR_SYNCOKIE ((uint32_t)0x00000001) /* SYNC event OK interrupt enable */
+#define CRS_CR_SYNCWARNIE ((uint32_t)0x00000002) /* SYNC warning interrupt enable */
+#define CRS_CR_ERRIE ((uint32_t)0x00000004) /* SYNC error interrupt enable */
+#define CRS_CR_ESYNCIE ((uint32_t)0x00000008) /* Expected SYNC(ESYNCF) interrupt Enable*/
+#define CRS_CR_CEN ((uint32_t)0x00000020) /* Frequency error counter enable */
+#define CRS_CR_AUTOTRIMEN ((uint32_t)0x00000040) /* Automatic trimming enable */
+#define CRS_CR_SWSYNC ((uint32_t)0x00000080) /* A Software SYNC event is generated */
+#define CRS_CR_TRIM ((uint32_t)0x00003F00) /* HSI48 oscillator smooth trimming */
+
+/******************* Bit definition for CRS_CFGR register *********************/
+#define CRS_CFGR_RELOAD ((uint32_t)0x0000FFFF) /* Counter reload value */
+#define CRS_CFGR_FELIM ((uint32_t)0x00FF0000) /* Frequency error limit */
+
+#define CRS_CFGR_SYNCDIV ((uint32_t)0x07000000) /* SYNC divider */
+#define CRS_CFGR_SYNCDIV_0 ((uint32_t)0x01000000) /* Bit 0 */
+#define CRS_CFGR_SYNCDIV_1 ((uint32_t)0x02000000) /* Bit 1 */
+#define CRS_CFGR_SYNCDIV_2 ((uint32_t)0x04000000) /* Bit 2 */
+
+#define CRS_CFGR_SYNCSRC ((uint32_t)0x30000000) /* SYNC signal source selection */
+#define CRS_CFGR_SYNCSRC_0 ((uint32_t)0x10000000) /* Bit 0 */
+#define CRS_CFGR_SYNCSRC_1 ((uint32_t)0x20000000) /* Bit 1 */
+
+#define CRS_CFGR_SYNCPOL ((uint32_t)0x80000000) /* SYNC polarity selection */
+
+/******************* Bit definition for CRS_ISR register *********************/
+#define CRS_ISR_SYNCOKF ((uint32_t)0x00000001) /* SYNC event OK flag */
+#define CRS_ISR_SYNCWARNF ((uint32_t)0x00000002) /* SYNC warning */
+#define CRS_ISR_ERRF ((uint32_t)0x00000004) /* SYNC error flag */
+#define CRS_ISR_ESYNCF ((uint32_t)0x00000008) /* Expected SYNC flag */
+#define CRS_ISR_SYNCERR ((uint32_t)0x00000100) /* SYNC error */
+#define CRS_ISR_SYNCMISS ((uint32_t)0x00000200) /* SYNC missed */
+#define CRS_ISR_TRIMOVF ((uint32_t)0x00000400) /* Trimming overflow or underflow */
+#define CRS_ISR_FEDIR ((uint32_t)0x00008000) /* Frequency error direction */
+#define CRS_ISR_FECAP ((uint32_t)0xFFFF0000) /* Frequency error capture */
+
+/******************* Bit definition for CRS_ICR register *********************/
+#define CRS_ICR_SYNCOKC ((uint32_t)0x00000001) /* SYNC event OK clear flag */
+#define CRS_ICR_SYNCWARNC ((uint32_t)0x00000002) /* SYNC warning clear flag */
+#define CRS_ICR_ERRC ((uint32_t)0x00000004) /* Error clear flag */
+#define CRS_ICR_ESYNCC ((uint32_t)0x00000008) /* Expected SYNC clear flag */
+
+/******************************************************************************/
+/* */
+/* Digital to Analog Converter (DAC) */
+/* */
+/******************************************************************************/
+/******************** Bit definition for DAC_CR register ********************/
+#define DAC_CR_EN1 ((uint32_t)0x00000001) /*!< DAC channel1 enable */
+#define DAC_CR_BOFF1 ((uint32_t)0x00000002) /*!< DAC channel1 output buffer disable */
+#define DAC_CR_TEN1 ((uint32_t)0x00000004) /*!< DAC channel1 Trigger enable */
+
+#define DAC_CR_TSEL1 ((uint32_t)0x00000038) /*!< TSEL1[2:0] (DAC channel1 Trigger selection) */
+#define DAC_CR_TSEL1_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define DAC_CR_TSEL1_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define DAC_CR_TSEL1_2 ((uint32_t)0x00000020) /*!< Bit 2 */
+
+#define DAC_CR_WAVE1 ((uint32_t)0x000000C0) /*!< WAVE1[1:0] (DAC channel1 noise/triangle wave generation enable) */
+#define DAC_CR_WAVE1_0 ((uint32_t)0x00000040) /*!< Bit 0 */
+#define DAC_CR_WAVE1_1 ((uint32_t)0x00000080) /*!< Bit 1 */
+
+#define DAC_CR_MAMP1 ((uint32_t)0x00000F00) /*!< MAMP1[3:0] (DAC channel1 Mask/Amplitude selector) */
+#define DAC_CR_MAMP1_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define DAC_CR_MAMP1_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define DAC_CR_MAMP1_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define DAC_CR_MAMP1_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+
+#define DAC_CR_DMAEN1 ((uint32_t)0x00001000) /*!< DAC channel1 DMA enable */
+#define DAC_CR_DMAUDRIE1 ((uint32_t)0x00002000) /*!< DAC channel1 DMA Underrun Interrupt enable */
+
+#define DAC_CR_EN2 ((uint32_t)0x00010000) /*!< DAC channel2 enable */
+#define DAC_CR_BOFF2 ((uint32_t)0x00020000) /*!< DAC channel2 output buffer disable */
+#define DAC_CR_TEN2 ((uint32_t)0x00040000) /*!< DAC channel2 Trigger enable */
+
+#define DAC_CR_TSEL2 ((uint32_t)0x00380000) /*!< TSEL2[2:0] (DAC channel2 Trigger selection) */
+#define DAC_CR_TSEL2_0 ((uint32_t)0x00080000) /*!< Bit 0 */
+#define DAC_CR_TSEL2_1 ((uint32_t)0x00100000) /*!< Bit 1 */
+#define DAC_CR_TSEL2_2 ((uint32_t)0x00200000) /*!< Bit 2 */
+
+#define DAC_CR_WAVE2 ((uint32_t)0x00C00000) /*!< WAVE2[1:0] (DAC channel2 noise/triangle wave generation enable) */
+#define DAC_CR_WAVE2_0 ((uint32_t)0x00400000) /*!< Bit 0 */
+#define DAC_CR_WAVE2_1 ((uint32_t)0x00800000) /*!< Bit 1 */
+
+#define DAC_CR_MAMP2 ((uint32_t)0x0F000000) /*!< MAMP2[3:0] (DAC channel2 Mask/Amplitude selector) */
+#define DAC_CR_MAMP2_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define DAC_CR_MAMP2_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define DAC_CR_MAMP2_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+#define DAC_CR_MAMP2_3 ((uint32_t)0x08000000) /*!< Bit 3 */
+
+#define DAC_CR_DMAEN2 ((uint32_t)0x10000000) /*!< DAC channel2 DMA enabled */
+#define DAC_CR_DMAUDRIE2 ((uint32_t)0x20000000) /*!< DAC channel2 DMA Underrun Interrupt enable */
+
+/***************** Bit definition for DAC_SWTRIGR register ******************/
+#define DAC_SWTRIGR_SWTRIG1 ((uint32_t)0x00000001) /*!< DAC channel1 software trigger */
+#define DAC_SWTRIGR_SWTRIG2 ((uint32_t)0x00000002) /*!< DAC channel2 software trigger */
+
+/***************** Bit definition for DAC_DHR12R1 register ******************/
+#define DAC_DHR12R1_DACC1DHR ((uint32_t)0x00000FFF) /*!< DAC channel1 12-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12L1 register ******************/
+#define DAC_DHR12L1_DACC1DHR ((uint32_t)0x0000FFF0) /*!< DAC channel1 12-bit Left aligned data */
+
+/****************** Bit definition for DAC_DHR8R1 register ******************/
+#define DAC_DHR8R1_DACC1DHR ((uint32_t)0x000000FF) /*!< DAC channel1 8-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12R2 register ******************/
+#define DAC_DHR12R2_DACC2DHR ((uint32_t)0x00000FFF) /*!< DAC channel2 12-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12L2 register ******************/
+#define DAC_DHR12L2_DACC2DHR ((uint32_t)0x0000FFF0) /*!< DAC channel2 12-bit Left aligned data */
+
+/****************** Bit definition for DAC_DHR8R2 register ******************/
+#define DAC_DHR8R2_DACC2DHR ((uint32_t)0x000000FF) /*!< DAC channel2 8-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12RD register ******************/
+#define DAC_DHR12RD_DACC1DHR ((uint32_t)0x00000FFF) /*!< DAC channel1 12-bit Right aligned data */
+#define DAC_DHR12RD_DACC2DHR ((uint32_t)0x0FFF0000) /*!< DAC channel2 12-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12LD register ******************/
+#define DAC_DHR12LD_DACC1DHR ((uint32_t)0x0000FFF0) /*!< DAC channel1 12-bit Left aligned data */
+#define DAC_DHR12LD_DACC2DHR ((uint32_t)0xFFF00000) /*!< DAC channel2 12-bit Left aligned data */
+
+/****************** Bit definition for DAC_DHR8RD register ******************/
+#define DAC_DHR8RD_DACC1DHR ((uint32_t)0x000000FF) /*!< DAC channel1 8-bit Right aligned data */
+#define DAC_DHR8RD_DACC2DHR ((uint32_t)0x0000FF00) /*!< DAC channel2 8-bit Right aligned data */
+
+/******************* Bit definition for DAC_DOR1 register *******************/
+#define DAC_DOR1_DACC1DOR ((uint32_t)0x00000FFF) /*!< DAC channel1 data output */
+
+/******************* Bit definition for DAC_DOR2 register *******************/
+#define DAC_DOR2_DACC2DOR ((uint32_t)0x00000FFF) /*!< DAC channel2 data output */
+
+/******************** Bit definition for DAC_SR register ********************/
+#define DAC_SR_DMAUDR1 ((uint32_t)0x00002000) /*!< DAC channel1 DMA underrun flag */
+#define DAC_SR_DMAUDR2 ((uint32_t)0x20000000) /*!< DAC channel2 DMA underrun flag */
+
+/******************************************************************************/
+/* */
+/* Debug MCU (DBGMCU) */
+/* */
+/******************************************************************************/
+
+/**************** Bit definition for DBGMCU_IDCODE register *****************/
+#define DBGMCU_IDCODE_DEV_ID ((uint32_t)0x00000FFF) /*!< Device Identifier */
+
+#define DBGMCU_IDCODE_REV_ID ((uint32_t)0xFFFF0000) /*!< REV_ID[15:0] bits (Revision Identifier) */
+#define DBGMCU_IDCODE_REV_ID_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define DBGMCU_IDCODE_REV_ID_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define DBGMCU_IDCODE_REV_ID_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define DBGMCU_IDCODE_REV_ID_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+#define DBGMCU_IDCODE_REV_ID_4 ((uint32_t)0x00100000) /*!< Bit 4 */
+#define DBGMCU_IDCODE_REV_ID_5 ((uint32_t)0x00200000) /*!< Bit 5 */
+#define DBGMCU_IDCODE_REV_ID_6 ((uint32_t)0x00400000) /*!< Bit 6 */
+#define DBGMCU_IDCODE_REV_ID_7 ((uint32_t)0x00800000) /*!< Bit 7 */
+#define DBGMCU_IDCODE_REV_ID_8 ((uint32_t)0x01000000) /*!< Bit 8 */
+#define DBGMCU_IDCODE_REV_ID_9 ((uint32_t)0x02000000) /*!< Bit 9 */
+#define DBGMCU_IDCODE_REV_ID_10 ((uint32_t)0x04000000) /*!< Bit 10 */
+#define DBGMCU_IDCODE_REV_ID_11 ((uint32_t)0x08000000) /*!< Bit 11 */
+#define DBGMCU_IDCODE_REV_ID_12 ((uint32_t)0x10000000) /*!< Bit 12 */
+#define DBGMCU_IDCODE_REV_ID_13 ((uint32_t)0x20000000) /*!< Bit 13 */
+#define DBGMCU_IDCODE_REV_ID_14 ((uint32_t)0x40000000) /*!< Bit 14 */
+#define DBGMCU_IDCODE_REV_ID_15 ((uint32_t)0x80000000) /*!< Bit 15 */
+
+/****************** Bit definition for DBGMCU_CR register *******************/
+#define DBGMCU_CR_DBG_STOP ((uint32_t)0x00000002) /*!< Debug Stop Mode */
+#define DBGMCU_CR_DBG_STANDBY ((uint32_t)0x00000004) /*!< Debug Standby mode */
+
+/****************** Bit definition for DBGMCU_APB1_FZ register **************/
+#define DBGMCU_APB1_FZ_DBG_TIM2_STOP ((uint32_t)0x00000001) /*!< TIM2 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM3_STOP ((uint32_t)0x00000002) /*!< TIM3 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM6_STOP ((uint32_t)0x00000010) /*!< TIM6 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM7_STOP ((uint32_t)0x00000020) /*!< TIM7 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM14_STOP ((uint32_t)0x00000100) /*!< TIM14 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_RTC_STOP ((uint32_t)0x00000400) /*!< RTC Calendar frozen when core is halted */
+#define DBGMCU_APB1_FZ_DBG_WWDG_STOP ((uint32_t)0x00000800) /*!< Debug Window Watchdog stopped when Core is halted */
+#define DBGMCU_APB1_FZ_DBG_IWDG_STOP ((uint32_t)0x00001000) /*!< Debug Independent Watchdog stopped when Core is halted */
+#define DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00200000) /*!< I2C1 SMBUS timeout mode stopped when Core is halted */
+#define DBGMCU_APB1_FZ_DBG_CAN_STOP ((uint32_t)0x02000000) /*!< CAN debug stopped when Core is halted */
+
+/****************** Bit definition for DBGMCU_APB2_FZ register **************/
+#define DBGMCU_APB2_FZ_DBG_TIM1_STOP ((uint32_t)0x00000800) /*!< TIM1 counter stopped when core is halted */
+#define DBGMCU_APB2_FZ_DBG_TIM15_STOP ((uint32_t)0x00010000) /*!< TIM15 counter stopped when core is halted */
+#define DBGMCU_APB2_FZ_DBG_TIM16_STOP ((uint32_t)0x00020000) /*!< TIM16 counter stopped when core is halted */
+#define DBGMCU_APB2_FZ_DBG_TIM17_STOP ((uint32_t)0x00040000) /*!< TIM17 counter stopped when core is halted */
+
+/******************************************************************************/
+/* */
+/* DMA Controller (DMA) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for DMA_ISR register ********************/
+#define DMA_ISR_GIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt flag */
+#define DMA_ISR_TCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete flag */
+#define DMA_ISR_HTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer flag */
+#define DMA_ISR_TEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error flag */
+#define DMA_ISR_GIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt flag */
+#define DMA_ISR_TCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete flag */
+#define DMA_ISR_HTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer flag */
+#define DMA_ISR_TEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error flag */
+#define DMA_ISR_GIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt flag */
+#define DMA_ISR_TCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete flag */
+#define DMA_ISR_HTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer flag */
+#define DMA_ISR_TEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error flag */
+#define DMA_ISR_GIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt flag */
+#define DMA_ISR_TCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete flag */
+#define DMA_ISR_HTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer flag */
+#define DMA_ISR_TEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error flag */
+#define DMA_ISR_GIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt flag */
+#define DMA_ISR_TCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete flag */
+#define DMA_ISR_HTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer flag */
+#define DMA_ISR_TEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error flag */
+#define DMA_ISR_GIF6 ((uint32_t)0x00100000) /*!< Channel 6 Global interrupt flag */
+#define DMA_ISR_TCIF6 ((uint32_t)0x00200000) /*!< Channel 6 Transfer Complete flag */
+#define DMA_ISR_HTIF6 ((uint32_t)0x00400000) /*!< Channel 6 Half Transfer flag */
+#define DMA_ISR_TEIF6 ((uint32_t)0x00800000) /*!< Channel 6 Transfer Error flag */
+#define DMA_ISR_GIF7 ((uint32_t)0x01000000) /*!< Channel 7 Global interrupt flag */
+#define DMA_ISR_TCIF7 ((uint32_t)0x02000000) /*!< Channel 7 Transfer Complete flag */
+#define DMA_ISR_HTIF7 ((uint32_t)0x04000000) /*!< Channel 7 Half Transfer flag */
+#define DMA_ISR_TEIF7 ((uint32_t)0x08000000) /*!< Channel 7 Transfer Error flag */
+
+/******************* Bit definition for DMA_IFCR register *******************/
+#define DMA_IFCR_CGIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt clear */
+#define DMA_IFCR_CTCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete clear */
+#define DMA_IFCR_CHTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer clear */
+#define DMA_IFCR_CTEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error clear */
+#define DMA_IFCR_CGIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt clear */
+#define DMA_IFCR_CTCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete clear */
+#define DMA_IFCR_CHTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer clear */
+#define DMA_IFCR_CTEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error clear */
+#define DMA_IFCR_CGIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt clear */
+#define DMA_IFCR_CTCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete clear */
+#define DMA_IFCR_CHTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer clear */
+#define DMA_IFCR_CTEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error clear */
+#define DMA_IFCR_CGIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt clear */
+#define DMA_IFCR_CTCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete clear */
+#define DMA_IFCR_CHTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer clear */
+#define DMA_IFCR_CTEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error clear */
+#define DMA_IFCR_CGIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt clear */
+#define DMA_IFCR_CTCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete clear */
+#define DMA_IFCR_CHTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer clear */
+#define DMA_IFCR_CTEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error clear */
+#define DMA_IFCR_CGIF6 ((uint32_t)0x00100000) /*!< Channel 6 Global interrupt clear */
+#define DMA_IFCR_CTCIF6 ((uint32_t)0x00200000) /*!< Channel 6 Transfer Complete clear */
+#define DMA_IFCR_CHTIF6 ((uint32_t)0x00400000) /*!< Channel 6 Half Transfer clear */
+#define DMA_IFCR_CTEIF6 ((uint32_t)0x00800000) /*!< Channel 6 Transfer Error clear */
+#define DMA_IFCR_CGIF7 ((uint32_t)0x01000000) /*!< Channel 7 Global interrupt clear */
+#define DMA_IFCR_CTCIF7 ((uint32_t)0x02000000) /*!< Channel 7 Transfer Complete clear */
+#define DMA_IFCR_CHTIF7 ((uint32_t)0x04000000) /*!< Channel 7 Half Transfer clear */
+#define DMA_IFCR_CTEIF7 ((uint32_t)0x08000000) /*!< Channel 7 Transfer Error clear */
+
+/******************* Bit definition for DMA_CCR register ********************/
+#define DMA_CCR_EN ((uint32_t)0x00000001) /*!< Channel enable */
+#define DMA_CCR_TCIE ((uint32_t)0x00000002) /*!< Transfer complete interrupt enable */
+#define DMA_CCR_HTIE ((uint32_t)0x00000004) /*!< Half Transfer interrupt enable */
+#define DMA_CCR_TEIE ((uint32_t)0x00000008) /*!< Transfer error interrupt enable */
+#define DMA_CCR_DIR ((uint32_t)0x00000010) /*!< Data transfer direction */
+#define DMA_CCR_CIRC ((uint32_t)0x00000020) /*!< Circular mode */
+#define DMA_CCR_PINC ((uint32_t)0x00000040) /*!< Peripheral increment mode */
+#define DMA_CCR_MINC ((uint32_t)0x00000080) /*!< Memory increment mode */
+
+#define DMA_CCR_PSIZE ((uint32_t)0x00000300) /*!< PSIZE[1:0] bits (Peripheral size) */
+#define DMA_CCR_PSIZE_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define DMA_CCR_PSIZE_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+
+#define DMA_CCR_MSIZE ((uint32_t)0x00000C00) /*!< MSIZE[1:0] bits (Memory size) */
+#define DMA_CCR_MSIZE_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define DMA_CCR_MSIZE_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+
+#define DMA_CCR_PL ((uint32_t)0x00003000) /*!< PL[1:0] bits(Channel Priority level)*/
+#define DMA_CCR_PL_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define DMA_CCR_PL_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+
+#define DMA_CCR_MEM2MEM ((uint32_t)0x00004000) /*!< Memory to memory mode */
+
+/****************** Bit definition for DMA_CNDTR register *******************/
+#define DMA_CNDTR_NDT ((uint32_t)0x0000FFFF) /*!< Number of data to Transfer */
+
+/****************** Bit definition for DMA_CPAR register ********************/
+#define DMA_CPAR_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */
+
+/****************** Bit definition for DMA_CMAR register ********************/
+#define DMA_CMAR_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */
+
+/****************** Bit definition for DMA1_CSELR register ********************/
+#define DMA1_CSELR_DEFAULT ((uint32_t)0x00000000) /*!< Default remap position for DMA1 */
+#define DMA1_CSELR_CH1_ADC ((uint32_t)0x00000001) /*!< Remap ADC on DMA1 Channel 1*/
+#define DMA1_CSELR_CH1_TIM17_CH1 ((uint32_t)0x00000007) /*!< Remap TIM17 channel 1 on DMA1 channel 1 */
+#define DMA1_CSELR_CH1_TIM17_UP ((uint32_t)0x00000007) /*!< Remap TIM17 up on DMA1 channel 1 */
+#define DMA1_CSELR_CH1_USART1_RX ((uint32_t)0x00000008) /*!< Remap USART1 Rx on DMA1 channel 1 */
+#define DMA1_CSELR_CH1_USART2_RX ((uint32_t)0x00000009) /*!< Remap USART2 Rx on DMA1 channel 1 */
+#define DMA1_CSELR_CH1_USART3_RX ((uint32_t)0x0000000A) /*!< Remap USART3 Rx on DMA1 channel 1 */
+#define DMA1_CSELR_CH1_USART4_RX ((uint32_t)0x0000000B) /*!< Remap USART4 Rx on DMA1 channel 1 */
+#define DMA1_CSELR_CH1_USART5_RX ((uint32_t)0x0000000C) /*!< Remap USART5 Rx on DMA1 channel 1 */
+#define DMA1_CSELR_CH1_USART6_RX ((uint32_t)0x0000000D) /*!< Remap USART6 Rx on DMA1 channel 1 */
+#define DMA1_CSELR_CH1_USART7_RX ((uint32_t)0x0000000E) /*!< Remap USART7 Rx on DMA1 channel 1 */
+#define DMA1_CSELR_CH1_USART8_RX ((uint32_t)0x0000000F) /*!< Remap USART8 Rx on DMA1 channel 1 */
+#define DMA1_CSELR_CH2_ADC ((uint32_t)0x00000010) /*!< Remap ADC on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_I2C1_TX ((uint32_t)0x00000020) /*!< Remap I2C1 Tx on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_SPI1_RX ((uint32_t)0x00000030) /*!< Remap SPI1 Rx on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_TIM1_CH1 ((uint32_t)0x00000040) /*!< Remap TIM1 channel 1 on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_TIM17_CH1 ((uint32_t)0x00000070) /*!< Remap TIM17 channel 1 on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_TIM17_UP ((uint32_t)0x00000070) /*!< Remap TIM17 up on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_USART1_TX ((uint32_t)0x00000080) /*!< Remap USART1 Tx on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_USART2_TX ((uint32_t)0x00000090) /*!< Remap USART2 Tx on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_USART3_TX ((uint32_t)0x000000A0) /*!< Remap USART3 Tx on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_USART4_TX ((uint32_t)0x000000B0) /*!< Remap USART4 Tx on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_USART5_TX ((uint32_t)0x000000C0) /*!< Remap USART5 Tx on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_USART6_TX ((uint32_t)0x000000D0) /*!< Remap USART6 Tx on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_USART7_TX ((uint32_t)0x000000E0) /*!< Remap USART7 Tx on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_USART8_TX ((uint32_t)0x000000F0) /*!< Remap USART8 Tx on DMA1 channel 2 */
+#define DMA1_CSELR_CH3_TIM6_UP ((uint32_t)0x00000100) /*!< Remap TIM6 up on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_DAC_CH1 ((uint32_t)0x00000100) /*!< Remap DAC Channel 1on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_I2C1_RX ((uint32_t)0x00000200) /*!< Remap I2C1 Rx on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_SPI1_TX ((uint32_t)0x00000300) /*!< Remap SPI1 Tx on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_TIM1_CH2 ((uint32_t)0x00000400) /*!< Remap TIM1 channel 2 on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_TIM2_CH2 ((uint32_t)0x00000500) /*!< Remap TIM2 channel 2 on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_TIM16_CH1 ((uint32_t)0x00000700) /*!< Remap TIM16 channel 1 on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_TIM16_UP ((uint32_t)0x00000700) /*!< Remap TIM16 up on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_USART1_RX ((uint32_t)0x00000800) /*!< Remap USART1 Rx on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_USART2_RX ((uint32_t)0x00000900) /*!< Remap USART2 Rx on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_USART3_RX ((uint32_t)0x00000A00) /*!< Remap USART3 Rx on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_USART4_RX ((uint32_t)0x00000B00) /*!< Remap USART4 Rx on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_USART5_RX ((uint32_t)0x00000C00) /*!< Remap USART5 Rx on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_USART6_RX ((uint32_t)0x00000D00) /*!< Remap USART6 Rx on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_USART7_RX ((uint32_t)0x00000E00) /*!< Remap USART7 Rx on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_USART8_RX ((uint32_t)0x00000F00) /*!< Remap USART8 Rx on DMA1 channel 3 */
+#define DMA1_CSELR_CH4_TIM7_UP ((uint32_t)0x00001000) /*!< Remap TIM7 up on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_DAC_CH2 ((uint32_t)0x00001000) /*!< Remap DAC Channel 2 on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_I2C2_TX ((uint32_t)0x00002000) /*!< Remap I2C2 Tx on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_SPI2_RX ((uint32_t)0x00003000) /*!< Remap SPI2 Rx on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_TIM2_CH4 ((uint32_t)0x00005000) /*!< Remap TIM2 channel 4 on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_TIM3_CH1 ((uint32_t)0x00006000) /*!< Remap TIM3 channel 1 on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_TIM3_TRIG ((uint32_t)0x00006000) /*!< Remap TIM3 Trig on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_TIM16_CH1 ((uint32_t)0x00007000) /*!< Remap TIM16 channel 1 on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_TIM16_UP ((uint32_t)0x00007000) /*!< Remap TIM16 up on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_USART1_TX ((uint32_t)0x00008000) /*!< Remap USART1 Tx on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_USART2_TX ((uint32_t)0x00009000) /*!< Remap USART2 Tx on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_USART3_TX ((uint32_t)0x0000A000) /*!< Remap USART3 Tx on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_USART4_TX ((uint32_t)0x0000B000) /*!< Remap USART4 Tx on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_USART5_TX ((uint32_t)0x0000C000) /*!< Remap USART5 Tx on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_USART6_TX ((uint32_t)0x0000D000) /*!< Remap USART6 Tx on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_USART7_TX ((uint32_t)0x0000E000) /*!< Remap USART7 Tx on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_USART8_TX ((uint32_t)0x0000F000) /*!< Remap USART8 Tx on DMA1 channel 4 */
+#define DMA1_CSELR_CH5_I2C2_RX ((uint32_t)0x00020000) /*!< Remap I2C2 Rx on DMA1 channel 5 */
+#define DMA1_CSELR_CH5_SPI2_TX ((uint32_t)0x00030000) /*!< Remap SPI1 Tx on DMA1 channel 5 */
+#define DMA1_CSELR_CH5_TIM1_CH3 ((uint32_t)0x00040000) /*!< Remap TIM1 channel 3 on DMA1 channel 5 */
+#define DMA1_CSELR_CH5_USART1_RX ((uint32_t)0x00080000) /*!< Remap USART1 Rx on DMA1 channel 5 */
+#define DMA1_CSELR_CH5_USART2_RX ((uint32_t)0x00090000) /*!< Remap USART2 Rx on DMA1 channel 5 */
+#define DMA1_CSELR_CH5_USART3_RX ((uint32_t)0x000A0000) /*!< Remap USART3 Rx on DMA1 channel 5 */
+#define DMA1_CSELR_CH5_USART4_RX ((uint32_t)0x000B0000) /*!< Remap USART4 Rx on DMA1 channel 5 */
+#define DMA1_CSELR_CH5_USART5_RX ((uint32_t)0x000C0000) /*!< Remap USART5 Rx on DMA1 channel 5 */
+#define DMA1_CSELR_CH5_USART6_RX ((uint32_t)0x000D0000) /*!< Remap USART6 Rx on DMA1 channel 5 */
+#define DMA1_CSELR_CH5_USART7_RX ((uint32_t)0x000E0000) /*!< Remap USART7 Rx on DMA1 channel 5 */
+#define DMA1_CSELR_CH5_USART8_RX ((uint32_t)0x000F0000) /*!< Remap USART8 Rx on DMA1 channel 5 */
+#define DMA1_CSELR_CH6_I2C1_TX ((uint32_t)0x00200000) /*!< Remap I2C1 Tx on DMA1 channel 6 */
+#define DMA1_CSELR_CH6_SPI2_RX ((uint32_t)0x00300000) /*!< Remap SPI2 Rx on DMA1 channel 6 */
+#define DMA1_CSELR_CH6_TIM1_CH1 ((uint32_t)0x00400000) /*!< Remap TIM1 channel 1 on DMA1 channel 6 */
+#define DMA1_CSELR_CH6_TIM1_CH2 ((uint32_t)0x00400000) /*!< Remap TIM1 channel 2 on DMA1 channel 6 */
+#define DMA1_CSELR_CH6_TIM1_CH3 ((uint32_t)0x00400000) /*!< Remap TIM1 channel 3 on DMA1 channel 6 */
+#define DMA1_CSELR_CH6_TIM3_CH1 ((uint32_t)0x00600000) /*!< Remap TIM3 channel 1 on DMA1 channel 6 */
+#define DMA1_CSELR_CH6_TIM3_TRIG ((uint32_t)0x00600000) /*!< Remap TIM3 Trig on DMA1 channel 6 */
+#define DMA1_CSELR_CH6_TIM16_CH1 ((uint32_t)0x00700000) /*!< Remap TIM16 channel 1 on DMA1 channel 6 */
+#define DMA1_CSELR_CH6_TIM16_UP ((uint32_t)0x00700000) /*!< Remap TIM16 up on DMA1 channel 6 */
+#define DMA1_CSELR_CH6_USART1_RX ((uint32_t)0x00800000) /*!< Remap USART1 Rx on DMA1 channel 6 */
+#define DMA1_CSELR_CH6_USART2_RX ((uint32_t)0x00900000) /*!< Remap USART2 Rx on DMA1 channel 6 */
+#define DMA1_CSELR_CH6_USART3_RX ((uint32_t)0x00A00000) /*!< Remap USART3 Rx on DMA1 channel 6 */
+#define DMA1_CSELR_CH6_USART4_RX ((uint32_t)0x00B00000) /*!< Remap USART4 Rx on DMA1 channel 6 */
+#define DMA1_CSELR_CH6_USART5_RX ((uint32_t)0x00C00000) /*!< Remap USART5 Rx on DMA1 channel 6 */
+#define DMA1_CSELR_CH6_USART6_RX ((uint32_t)0x00D00000) /*!< Remap USART6 Rx on DMA1 channel 6 */
+#define DMA1_CSELR_CH6_USART7_RX ((uint32_t)0x00E00000) /*!< Remap USART7 Rx on DMA1 channel 6 */
+#define DMA1_CSELR_CH6_USART8_RX ((uint32_t)0x00F00000) /*!< Remap USART8 Rx on DMA1 channel 6 */
+#define DMA1_CSELR_CH7_I2C1_RX ((uint32_t)0x02000000) /*!< Remap I2C1 Rx on DMA1 channel 7 */
+#define DMA1_CSELR_CH7_SPI2_TX ((uint32_t)0x03000000) /*!< Remap SPI2 Tx on DMA1 channel 7 */
+#define DMA1_CSELR_CH7_TIM2_CH2 ((uint32_t)0x05000000) /*!< Remap TIM2 channel 2 on DMA1 channel 7 */
+#define DMA1_CSELR_CH7_TIM2_CH4 ((uint32_t)0x05000000) /*!< Remap TIM2 channel 4 on DMA1 channel 7 */
+#define DMA1_CSELR_CH7_TIM17_CH1 ((uint32_t)0x07000000) /*!< Remap TIM17 channel 1 on DMA1 channel 7 */
+#define DMA1_CSELR_CH7_TIM17_UP ((uint32_t)0x07000000) /*!< Remap TIM17 up on DMA1 channel 7 */
+#define DMA1_CSELR_CH7_USART1_TX ((uint32_t)0x08000000) /*!< Remap USART1 Tx on DMA1 channel 7 */
+#define DMA1_CSELR_CH7_USART2_TX ((uint32_t)0x09000000) /*!< Remap USART2 Tx on DMA1 channel 7 */
+#define DMA1_CSELR_CH7_USART3_TX ((uint32_t)0x0A000000) /*!< Remap USART3 Tx on DMA1 channel 7 */
+#define DMA1_CSELR_CH7_USART4_TX ((uint32_t)0x0B000000) /*!< Remap USART4 Tx on DMA1 channel 7 */
+#define DMA1_CSELR_CH7_USART5_TX ((uint32_t)0x0C000000) /*!< Remap USART5 Tx on DMA1 channel 7 */
+#define DMA1_CSELR_CH7_USART6_TX ((uint32_t)0x0D000000) /*!< Remap USART6 Tx on DMA1 channel 7 */
+#define DMA1_CSELR_CH7_USART7_TX ((uint32_t)0x0E000000) /*!< Remap USART7 Tx on DMA1 channel 7 */
+#define DMA1_CSELR_CH7_USART8_TX ((uint32_t)0x0F000000) /*!< Remap USART8 Tx on DMA1 channel 7 */
+
+/****************** Bit definition for DMA2_CSELR register ********************/
+#define DMA2_CSELR_DEFAULT ((uint32_t)0x00000000) /*!< Default remap position for DMA2 */
+#define DMA2_CSELR_CH1_I2C2_TX ((uint32_t)0x00000002) /*!< Remap I2C2 TX on DMA2 channel 1 */
+#define DMA2_CSELR_CH1_USART1_TX ((uint32_t)0x00000008) /*!< Remap USART1 Tx on DMA2 channel 1 */
+#define DMA2_CSELR_CH1_USART2_TX ((uint32_t)0x00000009) /*!< Remap USART2 Tx on DMA2 channel 1 */
+#define DMA2_CSELR_CH1_USART3_TX ((uint32_t)0x0000000A) /*!< Remap USART3 Tx on DMA2 channel 1 */
+#define DMA2_CSELR_CH1_USART4_TX ((uint32_t)0x0000000B) /*!< Remap USART4 Tx on DMA2 channel 1 */
+#define DMA2_CSELR_CH1_USART5_TX ((uint32_t)0x0000000C) /*!< Remap USART5 Tx on DMA2 channel 1 */
+#define DMA2_CSELR_CH1_USART6_TX ((uint32_t)0x0000000D) /*!< Remap USART6 Tx on DMA2 channel 1 */
+#define DMA2_CSELR_CH1_USART7_TX ((uint32_t)0x0000000E) /*!< Remap USART7 Tx on DMA2 channel 1 */
+#define DMA2_CSELR_CH1_USART8_TX ((uint32_t)0x0000000F) /*!< Remap USART8 Tx on DMA2 channel 1 */
+#define DMA2_CSELR_CH2_I2C2_RX ((uint32_t)0x00000020) /*!< Remap I2C2 Rx on DMA2 channel 2 */
+#define DMA2_CSELR_CH2_USART1_RX ((uint32_t)0x00000080) /*!< Remap USART1 Rx on DMA2 channel 2 */
+#define DMA2_CSELR_CH2_USART2_RX ((uint32_t)0x00000090) /*!< Remap USART2 Rx on DMA2 channel 2 */
+#define DMA2_CSELR_CH2_USART3_RX ((uint32_t)0x000000A0) /*!< Remap USART3 Rx on DMA2 channel 2 */
+#define DMA2_CSELR_CH2_USART4_RX ((uint32_t)0x000000B0) /*!< Remap USART4 Rx on DMA2 channel 2 */
+#define DMA2_CSELR_CH2_USART5_RX ((uint32_t)0x000000C0) /*!< Remap USART5 Rx on DMA2 channel 2 */
+#define DMA2_CSELR_CH2_USART6_RX ((uint32_t)0x000000D0) /*!< Remap USART6 Rx on DMA2 channel 2 */
+#define DMA2_CSELR_CH2_USART7_RX ((uint32_t)0x000000E0) /*!< Remap USART7 Rx on DMA2 channel 2 */
+#define DMA2_CSELR_CH2_USART8_RX ((uint32_t)0x000000F0) /*!< Remap USART8 Rx on DMA2 channel 2 */
+#define DMA2_CSELR_CH3_TIM6_UP ((uint32_t)0x00000100) /*!< Remap TIM6 up on DMA2 channel 3 */
+#define DMA2_CSELR_CH3_DAC_CH1 ((uint32_t)0x00000100) /*!< Remap DAC channel 1 on DMA2 channel 3 */
+#define DMA2_CSELR_CH3_SPI1_RX ((uint32_t)0x00000300) /*!< Remap SPI1 Rx on DMA2 channel 3 */
+#define DMA2_CSELR_CH3_USART1_RX ((uint32_t)0x00000800) /*!< Remap USART1 Rx on DMA2 channel 3 */
+#define DMA2_CSELR_CH3_USART2_RX ((uint32_t)0x00000900) /*!< Remap USART2 Rx on DMA2 channel 3 */
+#define DMA2_CSELR_CH3_USART3_RX ((uint32_t)0x00000A00) /*!< Remap USART3 Rx on DMA2 channel 3 */
+#define DMA2_CSELR_CH3_USART4_RX ((uint32_t)0x00000B00) /*!< Remap USART4 Rx on DMA2 channel 3 */
+#define DMA2_CSELR_CH3_USART5_RX ((uint32_t)0x00000C00) /*!< Remap USART5 Rx on DMA2 channel 3 */
+#define DMA2_CSELR_CH3_USART6_RX ((uint32_t)0x00000D00) /*!< Remap USART6 Rx on DMA2 channel 3 */
+#define DMA2_CSELR_CH3_USART7_RX ((uint32_t)0x00000E00) /*!< Remap USART7 Rx on DMA2 channel 3 */
+#define DMA2_CSELR_CH3_USART8_RX ((uint32_t)0x00000F00) /*!< Remap USART8 Rx on DMA2 channel 3 */
+#define DMA2_CSELR_CH4_TIM7_UP ((uint32_t)0x00001000) /*!< Remap TIM7 up on DMA2 channel 4 */
+#define DMA2_CSELR_CH4_DAC_CH2 ((uint32_t)0x00001000) /*!< Remap DAC channel 2 on DMA2 channel 4 */
+#define DMA2_CSELR_CH4_SPI1_TX ((uint32_t)0x00003000) /*!< Remap SPI1 Tx on DMA2 channel 4 */
+#define DMA2_CSELR_CH4_USART1_TX ((uint32_t)0x00008000) /*!< Remap USART1 Tx on DMA2 channel 4 */
+#define DMA2_CSELR_CH4_USART2_TX ((uint32_t)0x00009000) /*!< Remap USART2 Tx on DMA2 channel 4 */
+#define DMA2_CSELR_CH4_USART3_TX ((uint32_t)0x0000A000) /*!< Remap USART3 Tx on DMA2 channel 4 */
+#define DMA2_CSELR_CH4_USART4_TX ((uint32_t)0x0000B000) /*!< Remap USART4 Tx on DMA2 channel 4 */
+#define DMA2_CSELR_CH4_USART5_TX ((uint32_t)0x0000C000) /*!< Remap USART5 Tx on DMA2 channel 4 */
+#define DMA2_CSELR_CH4_USART6_TX ((uint32_t)0x0000D000) /*!< Remap USART6 Tx on DMA2 channel 4 */
+#define DMA2_CSELR_CH4_USART7_TX ((uint32_t)0x0000E000) /*!< Remap USART7 Tx on DMA2 channel 4 */
+#define DMA2_CSELR_CH4_USART8_TX ((uint32_t)0x0000F000) /*!< Remap USART8 Tx on DMA2 channel 4 */
+#define DMA2_CSELR_CH5_ADC ((uint32_t)0x00010000) /*!< Remap ADC on DMA2 channel 5 */
+#define DMA2_CSELR_CH5_USART1_TX ((uint32_t)0x00080000) /*!< Remap USART1 Tx on DMA2 channel 5 */
+#define DMA2_CSELR_CH5_USART2_TX ((uint32_t)0x00090000) /*!< Remap USART2 Tx on DMA2 channel 5 */
+#define DMA2_CSELR_CH5_USART3_TX ((uint32_t)0x000A0000) /*!< Remap USART3 Tx on DMA2 channel 5 */
+#define DMA2_CSELR_CH5_USART4_TX ((uint32_t)0x000B0000) /*!< Remap USART4 Tx on DMA2 channel 5 */
+#define DMA2_CSELR_CH5_USART5_TX ((uint32_t)0x000C0000) /*!< Remap USART5 Tx on DMA2 channel 5 */
+#define DMA2_CSELR_CH5_USART6_TX ((uint32_t)0x000D0000) /*!< Remap USART6 Tx on DMA2 channel 5 */
+#define DMA2_CSELR_CH5_USART7_TX ((uint32_t)0x000E0000) /*!< Remap USART7 Tx on DMA2 channel 5 */
+#define DMA2_CSELR_CH5_USART8_TX ((uint32_t)0x000F0000) /*!< Remap USART8 Tx on DMA2 channel 5 */
+
+/******************************************************************************/
+/* */
+/* External Interrupt/Event Controller (EXTI) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for EXTI_IMR register *******************/
+#define EXTI_IMR_MR0 ((uint32_t)0x00000001) /*!< Interrupt Mask on line 0 */
+#define EXTI_IMR_MR1 ((uint32_t)0x00000002) /*!< Interrupt Mask on line 1 */
+#define EXTI_IMR_MR2 ((uint32_t)0x00000004) /*!< Interrupt Mask on line 2 */
+#define EXTI_IMR_MR3 ((uint32_t)0x00000008) /*!< Interrupt Mask on line 3 */
+#define EXTI_IMR_MR4 ((uint32_t)0x00000010) /*!< Interrupt Mask on line 4 */
+#define EXTI_IMR_MR5 ((uint32_t)0x00000020) /*!< Interrupt Mask on line 5 */
+#define EXTI_IMR_MR6 ((uint32_t)0x00000040) /*!< Interrupt Mask on line 6 */
+#define EXTI_IMR_MR7 ((uint32_t)0x00000080) /*!< Interrupt Mask on line 7 */
+#define EXTI_IMR_MR8 ((uint32_t)0x00000100) /*!< Interrupt Mask on line 8 */
+#define EXTI_IMR_MR9 ((uint32_t)0x00000200) /*!< Interrupt Mask on line 9 */
+#define EXTI_IMR_MR10 ((uint32_t)0x00000400) /*!< Interrupt Mask on line 10 */
+#define EXTI_IMR_MR11 ((uint32_t)0x00000800) /*!< Interrupt Mask on line 11 */
+#define EXTI_IMR_MR12 ((uint32_t)0x00001000) /*!< Interrupt Mask on line 12 */
+#define EXTI_IMR_MR13 ((uint32_t)0x00002000) /*!< Interrupt Mask on line 13 */
+#define EXTI_IMR_MR14 ((uint32_t)0x00004000) /*!< Interrupt Mask on line 14 */
+#define EXTI_IMR_MR15 ((uint32_t)0x00008000) /*!< Interrupt Mask on line 15 */
+#define EXTI_IMR_MR16 ((uint32_t)0x00010000) /*!< Interrupt Mask on line 16 */
+#define EXTI_IMR_MR17 ((uint32_t)0x00020000) /*!< Interrupt Mask on line 17 */
+#define EXTI_IMR_MR19 ((uint32_t)0x00080000) /*!< Interrupt Mask on line 19 */
+#define EXTI_IMR_MR20 ((uint32_t)0x00100000) /*!< Interrupt Mask on line 20 */
+#define EXTI_IMR_MR21 ((uint32_t)0x00200000) /*!< Interrupt Mask on line 21 */
+#define EXTI_IMR_MR22 ((uint32_t)0x00400000) /*!< Interrupt Mask on line 22 */
+#define EXTI_IMR_MR23 ((uint32_t)0x00800000) /*!< Interrupt Mask on line 23 */
+#define EXTI_IMR_MR25 ((uint32_t)0x02000000) /*!< Interrupt Mask on line 25 */
+#define EXTI_IMR_MR26 ((uint32_t)0x04000000) /*!< Interrupt Mask on line 26 */
+#define EXTI_IMR_MR27 ((uint32_t)0x08000000) /*!< Interrupt Mask on line 27 */
+#define EXTI_IMR_MR28 ((uint32_t)0x10000000) /*!< Interrupt Mask on line 28 */
+#define EXTI_IMR_MR31 ((uint32_t)0x80000000) /*!< Interrupt Mask on line 31 */
+
+/****************** Bit definition for EXTI_EMR register ********************/
+#define EXTI_EMR_MR0 ((uint32_t)0x00000001) /*!< Event Mask on line 0 */
+#define EXTI_EMR_MR1 ((uint32_t)0x00000002) /*!< Event Mask on line 1 */
+#define EXTI_EMR_MR2 ((uint32_t)0x00000004) /*!< Event Mask on line 2 */
+#define EXTI_EMR_MR3 ((uint32_t)0x00000008) /*!< Event Mask on line 3 */
+#define EXTI_EMR_MR4 ((uint32_t)0x00000010) /*!< Event Mask on line 4 */
+#define EXTI_EMR_MR5 ((uint32_t)0x00000020) /*!< Event Mask on line 5 */
+#define EXTI_EMR_MR6 ((uint32_t)0x00000040) /*!< Event Mask on line 6 */
+#define EXTI_EMR_MR7 ((uint32_t)0x00000080) /*!< Event Mask on line 7 */
+#define EXTI_EMR_MR8 ((uint32_t)0x00000100) /*!< Event Mask on line 8 */
+#define EXTI_EMR_MR9 ((uint32_t)0x00000200) /*!< Event Mask on line 9 */
+#define EXTI_EMR_MR10 ((uint32_t)0x00000400) /*!< Event Mask on line 10 */
+#define EXTI_EMR_MR11 ((uint32_t)0x00000800) /*!< Event Mask on line 11 */
+#define EXTI_EMR_MR12 ((uint32_t)0x00001000) /*!< Event Mask on line 12 */
+#define EXTI_EMR_MR13 ((uint32_t)0x00002000) /*!< Event Mask on line 13 */
+#define EXTI_EMR_MR14 ((uint32_t)0x00004000) /*!< Event Mask on line 14 */
+#define EXTI_EMR_MR15 ((uint32_t)0x00008000) /*!< Event Mask on line 15 */
+#define EXTI_EMR_MR16 ((uint32_t)0x00010000) /*!< Event Mask on line 16 */
+#define EXTI_EMR_MR17 ((uint32_t)0x00020000) /*!< Event Mask on line 17 */
+#define EXTI_EMR_MR19 ((uint32_t)0x00080000) /*!< Event Mask on line 19 */
+#define EXTI_EMR_MR20 ((uint32_t)0x00100000) /*!< Event Mask on line 20 */
+#define EXTI_EMR_MR21 ((uint32_t)0x00200000) /*!< Event Mask on line 21 */
+#define EXTI_EMR_MR22 ((uint32_t)0x00400000) /*!< Event Mask on line 22 */
+#define EXTI_EMR_MR23 ((uint32_t)0x00800000) /*!< Event Mask on line 23 */
+#define EXTI_EMR_MR25 ((uint32_t)0x02000000) /*!< Event Mask on line 25 */
+#define EXTI_EMR_MR26 ((uint32_t)0x04000000) /*!< Event Mask on line 26 */
+#define EXTI_EMR_MR27 ((uint32_t)0x08000000) /*!< Event Mask on line 27 */
+#define EXTI_EMR_MR28 ((uint32_t)0x10000000) /*!< Event Mask on line 28 */
+#define EXTI_EMR_MR31 ((uint32_t)0x80000000) /*!< Event Mask on line 31 */
+
+/******************* Bit definition for EXTI_RTSR register ******************/
+#define EXTI_RTSR_TR0 ((uint32_t)0x00000001) /*!< Rising trigger event configuration bit of line 0 */
+#define EXTI_RTSR_TR1 ((uint32_t)0x00000002) /*!< Rising trigger event configuration bit of line 1 */
+#define EXTI_RTSR_TR2 ((uint32_t)0x00000004) /*!< Rising trigger event configuration bit of line 2 */
+#define EXTI_RTSR_TR3 ((uint32_t)0x00000008) /*!< Rising trigger event configuration bit of line 3 */
+#define EXTI_RTSR_TR4 ((uint32_t)0x00000010) /*!< Rising trigger event configuration bit of line 4 */
+#define EXTI_RTSR_TR5 ((uint32_t)0x00000020) /*!< Rising trigger event configuration bit of line 5 */
+#define EXTI_RTSR_TR6 ((uint32_t)0x00000040) /*!< Rising trigger event configuration bit of line 6 */
+#define EXTI_RTSR_TR7 ((uint32_t)0x00000080) /*!< Rising trigger event configuration bit of line 7 */
+#define EXTI_RTSR_TR8 ((uint32_t)0x00000100) /*!< Rising trigger event configuration bit of line 8 */
+#define EXTI_RTSR_TR9 ((uint32_t)0x00000200) /*!< Rising trigger event configuration bit of line 9 */
+#define EXTI_RTSR_TR10 ((uint32_t)0x00000400) /*!< Rising trigger event configuration bit of line 10 */
+#define EXTI_RTSR_TR11 ((uint32_t)0x00000800) /*!< Rising trigger event configuration bit of line 11 */
+#define EXTI_RTSR_TR12 ((uint32_t)0x00001000) /*!< Rising trigger event configuration bit of line 12 */
+#define EXTI_RTSR_TR13 ((uint32_t)0x00002000) /*!< Rising trigger event configuration bit of line 13 */
+#define EXTI_RTSR_TR14 ((uint32_t)0x00004000) /*!< Rising trigger event configuration bit of line 14 */
+#define EXTI_RTSR_TR15 ((uint32_t)0x00008000) /*!< Rising trigger event configuration bit of line 15 */
+#define EXTI_RTSR_TR16 ((uint32_t)0x00010000) /*!< Rising trigger event configuration bit of line 16 */
+#define EXTI_RTSR_TR17 ((uint32_t)0x00020000) /*!< Rising trigger event configuration bit of line 17 */
+#define EXTI_RTSR_TR19 ((uint32_t)0x00080000) /*!< Rising trigger event configuration bit of line 19 */
+#define EXTI_RTSR_TR20 ((uint32_t)0x00100000) /*!< Rising trigger event configuration bit of line 20 */
+#define EXTI_RTSR_TR21 ((uint32_t)0x00200000) /*!< Rising trigger event configuration bit of line 21 */
+#define EXTI_RTSR_TR22 ((uint32_t)0x00400000) /*!< Rising trigger event configuration bit of line 22 */
+
+/******************* Bit definition for EXTI_FTSR register *******************/
+#define EXTI_FTSR_TR0 ((uint32_t)0x00000001) /*!< Falling trigger event configuration bit of line 0 */
+#define EXTI_FTSR_TR1 ((uint32_t)0x00000002) /*!< Falling trigger event configuration bit of line 1 */
+#define EXTI_FTSR_TR2 ((uint32_t)0x00000004) /*!< Falling trigger event configuration bit of line 2 */
+#define EXTI_FTSR_TR3 ((uint32_t)0x00000008) /*!< Falling trigger event configuration bit of line 3 */
+#define EXTI_FTSR_TR4 ((uint32_t)0x00000010) /*!< Falling trigger event configuration bit of line 4 */
+#define EXTI_FTSR_TR5 ((uint32_t)0x00000020) /*!< Falling trigger event configuration bit of line 5 */
+#define EXTI_FTSR_TR6 ((uint32_t)0x00000040) /*!< Falling trigger event configuration bit of line 6 */
+#define EXTI_FTSR_TR7 ((uint32_t)0x00000080) /*!< Falling trigger event configuration bit of line 7 */
+#define EXTI_FTSR_TR8 ((uint32_t)0x00000100) /*!< Falling trigger event configuration bit of line 8 */
+#define EXTI_FTSR_TR9 ((uint32_t)0x00000200) /*!< Falling trigger event configuration bit of line 9 */
+#define EXTI_FTSR_TR10 ((uint32_t)0x00000400) /*!< Falling trigger event configuration bit of line 10 */
+#define EXTI_FTSR_TR11 ((uint32_t)0x00000800) /*!< Falling trigger event configuration bit of line 11 */
+#define EXTI_FTSR_TR12 ((uint32_t)0x00001000) /*!< Falling trigger event configuration bit of line 12 */
+#define EXTI_FTSR_TR13 ((uint32_t)0x00002000) /*!< Falling trigger event configuration bit of line 13 */
+#define EXTI_FTSR_TR14 ((uint32_t)0x00004000) /*!< Falling trigger event configuration bit of line 14 */
+#define EXTI_FTSR_TR15 ((uint32_t)0x00008000) /*!< Falling trigger event configuration bit of line 15 */
+#define EXTI_FTSR_TR16 ((uint32_t)0x00010000) /*!< Falling trigger event configuration bit of line 16 */
+#define EXTI_FTSR_TR17 ((uint32_t)0x00020000) /*!< Falling trigger event configuration bit of line 17 */
+#define EXTI_FTSR_TR19 ((uint32_t)0x00080000) /*!< Falling trigger event configuration bit of line 19 */
+#define EXTI_FTSR_TR20 ((uint32_t)0x00100000) /*!< Falling trigger event configuration bit of line 20 */
+#define EXTI_FTSR_TR21 ((uint32_t)0x00200000) /*!< Falling trigger event configuration bit of line 21 */
+#define EXTI_FTSR_TR22 ((uint32_t)0x00400000) /*!< Falling trigger event configuration bit of line 22 */
+
+/******************* Bit definition for EXTI_SWIER register *******************/
+#define EXTI_SWIER_SWIER0 ((uint32_t)0x00000001) /*!< Software Interrupt on line 0 */
+#define EXTI_SWIER_SWIER1 ((uint32_t)0x00000002) /*!< Software Interrupt on line 1 */
+#define EXTI_SWIER_SWIER2 ((uint32_t)0x00000004) /*!< Software Interrupt on line 2 */
+#define EXTI_SWIER_SWIER3 ((uint32_t)0x00000008) /*!< Software Interrupt on line 3 */
+#define EXTI_SWIER_SWIER4 ((uint32_t)0x00000010) /*!< Software Interrupt on line 4 */
+#define EXTI_SWIER_SWIER5 ((uint32_t)0x00000020) /*!< Software Interrupt on line 5 */
+#define EXTI_SWIER_SWIER6 ((uint32_t)0x00000040) /*!< Software Interrupt on line 6 */
+#define EXTI_SWIER_SWIER7 ((uint32_t)0x00000080) /*!< Software Interrupt on line 7 */
+#define EXTI_SWIER_SWIER8 ((uint32_t)0x00000100) /*!< Software Interrupt on line 8 */
+#define EXTI_SWIER_SWIER9 ((uint32_t)0x00000200) /*!< Software Interrupt on line 9 */
+#define EXTI_SWIER_SWIER10 ((uint32_t)0x00000400) /*!< Software Interrupt on line 10 */
+#define EXTI_SWIER_SWIER11 ((uint32_t)0x00000800) /*!< Software Interrupt on line 11 */
+#define EXTI_SWIER_SWIER12 ((uint32_t)0x00001000) /*!< Software Interrupt on line 12 */
+#define EXTI_SWIER_SWIER13 ((uint32_t)0x00002000) /*!< Software Interrupt on line 13 */
+#define EXTI_SWIER_SWIER14 ((uint32_t)0x00004000) /*!< Software Interrupt on line 14 */
+#define EXTI_SWIER_SWIER15 ((uint32_t)0x00008000) /*!< Software Interrupt on line 15 */
+#define EXTI_SWIER_SWIER16 ((uint32_t)0x00010000) /*!< Software Interrupt on line 16 */
+#define EXTI_SWIER_SWIER17 ((uint32_t)0x00020000) /*!< Software Interrupt on line 17 */
+#define EXTI_SWIER_SWIER19 ((uint32_t)0x00080000) /*!< Software Interrupt on line 19 */
+#define EXTI_SWIER_SWIER20 ((uint32_t)0x00100000) /*!< Software Interrupt on line 20 */
+#define EXTI_SWIER_SWIER21 ((uint32_t)0x00200000) /*!< Software Interrupt on line 21 */
+#define EXTI_SWIER_SWIER22 ((uint32_t)0x00400000) /*!< Software Interrupt on line 22 */
+
+/****************** Bit definition for EXTI_PR register *********************/
+#define EXTI_PR_PR0 ((uint32_t)0x00000001) /*!< Pending bit 0 */
+#define EXTI_PR_PR1 ((uint32_t)0x00000002) /*!< Pending bit 1 */
+#define EXTI_PR_PR2 ((uint32_t)0x00000004) /*!< Pending bit 2 */
+#define EXTI_PR_PR3 ((uint32_t)0x00000008) /*!< Pending bit 3 */
+#define EXTI_PR_PR4 ((uint32_t)0x00000010) /*!< Pending bit 4 */
+#define EXTI_PR_PR5 ((uint32_t)0x00000020) /*!< Pending bit 5 */
+#define EXTI_PR_PR6 ((uint32_t)0x00000040) /*!< Pending bit 6 */
+#define EXTI_PR_PR7 ((uint32_t)0x00000080) /*!< Pending bit 7 */
+#define EXTI_PR_PR8 ((uint32_t)0x00000100) /*!< Pending bit 8 */
+#define EXTI_PR_PR9 ((uint32_t)0x00000200) /*!< Pending bit 9 */
+#define EXTI_PR_PR10 ((uint32_t)0x00000400) /*!< Pending bit 10 */
+#define EXTI_PR_PR11 ((uint32_t)0x00000800) /*!< Pending bit 11 */
+#define EXTI_PR_PR12 ((uint32_t)0x00001000) /*!< Pending bit 12 */
+#define EXTI_PR_PR13 ((uint32_t)0x00002000) /*!< Pending bit 13 */
+#define EXTI_PR_PR14 ((uint32_t)0x00004000) /*!< Pending bit 14 */
+#define EXTI_PR_PR15 ((uint32_t)0x00008000) /*!< Pending bit 15 */
+#define EXTI_PR_PR16 ((uint32_t)0x00010000) /*!< Pending bit 16 */
+#define EXTI_PR_PR17 ((uint32_t)0x00020000) /*!< Pending bit 17 */
+#define EXTI_PR_PR19 ((uint32_t)0x00080000) /*!< Pending bit 19 */
+#define EXTI_PR_PR20 ((uint32_t)0x00100000) /*!< Pending bit 20 */
+#define EXTI_PR_PR21 ((uint32_t)0x00200000) /*!< Pending bit 21 */
+#define EXTI_PR_PR22 ((uint32_t)0x00400000) /*!< Pending bit 22 */
+
+/******************************************************************************/
+/* */
+/* FLASH and Option Bytes Registers */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for FLASH_ACR register ******************/
+#define FLASH_ACR_LATENCY ((uint32_t)0x00000001) /*!< LATENCY bit (Latency) */
+
+#define FLASH_ACR_PRFTBE ((uint32_t)0x00000010) /*!< Prefetch Buffer Enable */
+#define FLASH_ACR_PRFTBS ((uint32_t)0x00000020) /*!< Prefetch Buffer Status */
+
+/****************** Bit definition for FLASH_KEYR register ******************/
+#define FLASH_KEYR_FKEYR ((uint32_t)0xFFFFFFFF) /*!< FPEC Key */
+
+/***************** Bit definition for FLASH_OPTKEYR register ****************/
+#define FLASH_OPTKEYR_OPTKEYR ((uint32_t)0xFFFFFFFF) /*!< Option Byte Key */
+
+/****************** FLASH Keys **********************************************/
+#define FLASH_FKEY1 ((uint32_t)0x45670123) /*!< Flash program erase key1 */
+#define FLASH_FKEY2 ((uint32_t)0xCDEF89AB) /*!< Flash program erase key2: used with FLASH_PEKEY1
+ to unlock the write access to the FPEC. */
+
+#define FLASH_OPTKEY1 ((uint32_t)0x45670123) /*!< Flash option key1 */
+#define FLASH_OPTKEY2 ((uint32_t)0xCDEF89AB) /*!< Flash option key2: used with FLASH_OPTKEY1 to
+ unlock the write access to the option byte block */
+
+/****************** Bit definition for FLASH_SR register *******************/
+#define FLASH_SR_BSY ((uint32_t)0x00000001) /*!< Busy */
+#define FLASH_SR_PGERR ((uint32_t)0x00000004) /*!< Programming Error */
+#define FLASH_SR_WRPRTERR ((uint32_t)0x00000010) /*!< Write Protection Error */
+#define FLASH_SR_EOP ((uint32_t)0x00000020) /*!< End of operation */
+#define FLASH_SR_WRPERR FLASH_SR_WRPRTERR /*!< Legacy of Write Protection Error */
+
+/******************* Bit definition for FLASH_CR register *******************/
+#define FLASH_CR_PG ((uint32_t)0x00000001) /*!< Programming */
+#define FLASH_CR_PER ((uint32_t)0x00000002) /*!< Page Erase */
+#define FLASH_CR_MER ((uint32_t)0x00000004) /*!< Mass Erase */
+#define FLASH_CR_OPTPG ((uint32_t)0x00000010) /*!< Option Byte Programming */
+#define FLASH_CR_OPTER ((uint32_t)0x00000020) /*!< Option Byte Erase */
+#define FLASH_CR_STRT ((uint32_t)0x00000040) /*!< Start */
+#define FLASH_CR_LOCK ((uint32_t)0x00000080) /*!< Lock */
+#define FLASH_CR_OPTWRE ((uint32_t)0x00000200) /*!< Option Bytes Write Enable */
+#define FLASH_CR_ERRIE ((uint32_t)0x00000400) /*!< Error Interrupt Enable */
+#define FLASH_CR_EOPIE ((uint32_t)0x00001000) /*!< End of operation interrupt enable */
+#define FLASH_CR_OBL_LAUNCH ((uint32_t)0x00002000) /*!< Option Bytes Loader Launch */
+
+/******************* Bit definition for FLASH_AR register *******************/
+#define FLASH_AR_FAR ((uint32_t)0xFFFFFFFF) /*!< Flash Address */
+
+/****************** Bit definition for FLASH_OBR register *******************/
+#define FLASH_OBR_OPTERR ((uint32_t)0x00000001) /*!< Option Byte Error */
+#define FLASH_OBR_RDPRT1 ((uint32_t)0x00000002) /*!< Read protection Level 1 */
+#define FLASH_OBR_RDPRT2 ((uint32_t)0x00000004) /*!< Read protection Level 2 */
+
+#define FLASH_OBR_USER ((uint32_t)0x00003700) /*!< User Option Bytes */
+#define FLASH_OBR_IWDG_SW ((uint32_t)0x00000100) /*!< IWDG SW */
+#define FLASH_OBR_nRST_STOP ((uint32_t)0x00000200) /*!< nRST_STOP */
+#define FLASH_OBR_nRST_STDBY ((uint32_t)0x00000400) /*!< nRST_STDBY */
+#define FLASH_OBR_nBOOT1 ((uint32_t)0x00001000) /*!< nBOOT1 */
+#define FLASH_OBR_VDDA_MONITOR ((uint32_t)0x00002000) /*!< VDDA power supply supervisor */
+
+/* Old BOOT1 bit definition, maintained for legacy purpose */
+#define FLASH_OBR_BOOT1 FLASH_OBR_nBOOT1
+
+/* Old OBR_VDDA bit definition, maintained for legacy purpose */
+#define FLASH_OBR_VDDA_ANALOG FLASH_OBR_VDDA_MONITOR
+
+/****************** Bit definition for FLASH_WRPR register ******************/
+#define FLASH_WRPR_WRP ((uint32_t)0x0000FFFF) /*!< Write Protect */
+
+/*----------------------------------------------------------------------------*/
+
+/****************** Bit definition for OB_RDP register **********************/
+#define OB_RDP_RDP ((uint32_t)0x000000FF) /*!< Read protection option byte */
+#define OB_RDP_nRDP ((uint32_t)0x0000FF00) /*!< Read protection complemented option byte */
+
+/****************** Bit definition for OB_USER register *********************/
+#define OB_USER_USER ((uint32_t)0x00FF0000) /*!< User option byte */
+#define OB_USER_nUSER ((uint32_t)0xFF000000) /*!< User complemented option byte */
+
+/****************** Bit definition for OB_WRP0 register *********************/
+#define OB_WRP0_WRP0 ((uint32_t)0x000000FF) /*!< Flash memory write protection option bytes */
+#define OB_WRP0_nWRP0 ((uint32_t)0x0000FF00) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for OB_WRP1 register *********************/
+#define OB_WRP1_WRP1 ((uint32_t)0x00FF0000) /*!< Flash memory write protection option bytes */
+#define OB_WRP1_nWRP1 ((uint32_t)0xFF000000) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for OB_WRP2 register *********************/
+#define OB_WRP2_WRP2 ((uint32_t)0x000000FF) /*!< Flash memory write protection option bytes */
+#define OB_WRP2_nWRP2 ((uint32_t)0x0000FF00) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for OB_WRP3 register *********************/
+#define OB_WRP3_WRP3 ((uint32_t)0x00FF0000) /*!< Flash memory write protection option bytes */
+#define OB_WRP3_nWRP3 ((uint32_t)0xFF000000) /*!< Flash memory write protection complemented option bytes */
+
+/******************************************************************************/
+/* */
+/* General Purpose IOs (GPIO) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for GPIO_MODER register *****************/
+#define GPIO_MODER_MODER0 ((uint32_t)0x00000003)
+#define GPIO_MODER_MODER0_0 ((uint32_t)0x00000001)
+#define GPIO_MODER_MODER0_1 ((uint32_t)0x00000002)
+#define GPIO_MODER_MODER1 ((uint32_t)0x0000000C)
+#define GPIO_MODER_MODER1_0 ((uint32_t)0x00000004)
+#define GPIO_MODER_MODER1_1 ((uint32_t)0x00000008)
+#define GPIO_MODER_MODER2 ((uint32_t)0x00000030)
+#define GPIO_MODER_MODER2_0 ((uint32_t)0x00000010)
+#define GPIO_MODER_MODER2_1 ((uint32_t)0x00000020)
+#define GPIO_MODER_MODER3 ((uint32_t)0x000000C0)
+#define GPIO_MODER_MODER3_0 ((uint32_t)0x00000040)
+#define GPIO_MODER_MODER3_1 ((uint32_t)0x00000080)
+#define GPIO_MODER_MODER4 ((uint32_t)0x00000300)
+#define GPIO_MODER_MODER4_0 ((uint32_t)0x00000100)
+#define GPIO_MODER_MODER4_1 ((uint32_t)0x00000200)
+#define GPIO_MODER_MODER5 ((uint32_t)0x00000C00)
+#define GPIO_MODER_MODER5_0 ((uint32_t)0x00000400)
+#define GPIO_MODER_MODER5_1 ((uint32_t)0x00000800)
+#define GPIO_MODER_MODER6 ((uint32_t)0x00003000)
+#define GPIO_MODER_MODER6_0 ((uint32_t)0x00001000)
+#define GPIO_MODER_MODER6_1 ((uint32_t)0x00002000)
+#define GPIO_MODER_MODER7 ((uint32_t)0x0000C000)
+#define GPIO_MODER_MODER7_0 ((uint32_t)0x00004000)
+#define GPIO_MODER_MODER7_1 ((uint32_t)0x00008000)
+#define GPIO_MODER_MODER8 ((uint32_t)0x00030000)
+#define GPIO_MODER_MODER8_0 ((uint32_t)0x00010000)
+#define GPIO_MODER_MODER8_1 ((uint32_t)0x00020000)
+#define GPIO_MODER_MODER9 ((uint32_t)0x000C0000)
+#define GPIO_MODER_MODER9_0 ((uint32_t)0x00040000)
+#define GPIO_MODER_MODER9_1 ((uint32_t)0x00080000)
+#define GPIO_MODER_MODER10 ((uint32_t)0x00300000)
+#define GPIO_MODER_MODER10_0 ((uint32_t)0x00100000)
+#define GPIO_MODER_MODER10_1 ((uint32_t)0x00200000)
+#define GPIO_MODER_MODER11 ((uint32_t)0x00C00000)
+#define GPIO_MODER_MODER11_0 ((uint32_t)0x00400000)
+#define GPIO_MODER_MODER11_1 ((uint32_t)0x00800000)
+#define GPIO_MODER_MODER12 ((uint32_t)0x03000000)
+#define GPIO_MODER_MODER12_0 ((uint32_t)0x01000000)
+#define GPIO_MODER_MODER12_1 ((uint32_t)0x02000000)
+#define GPIO_MODER_MODER13 ((uint32_t)0x0C000000)
+#define GPIO_MODER_MODER13_0 ((uint32_t)0x04000000)
+#define GPIO_MODER_MODER13_1 ((uint32_t)0x08000000)
+#define GPIO_MODER_MODER14 ((uint32_t)0x30000000)
+#define GPIO_MODER_MODER14_0 ((uint32_t)0x10000000)
+#define GPIO_MODER_MODER14_1 ((uint32_t)0x20000000)
+#define GPIO_MODER_MODER15 ((uint32_t)0xC0000000)
+#define GPIO_MODER_MODER15_0 ((uint32_t)0x40000000)
+#define GPIO_MODER_MODER15_1 ((uint32_t)0x80000000)
+
+/****************** Bit definition for GPIO_OTYPER register *****************/
+#define GPIO_OTYPER_OT_0 ((uint32_t)0x00000001)
+#define GPIO_OTYPER_OT_1 ((uint32_t)0x00000002)
+#define GPIO_OTYPER_OT_2 ((uint32_t)0x00000004)
+#define GPIO_OTYPER_OT_3 ((uint32_t)0x00000008)
+#define GPIO_OTYPER_OT_4 ((uint32_t)0x00000010)
+#define GPIO_OTYPER_OT_5 ((uint32_t)0x00000020)
+#define GPIO_OTYPER_OT_6 ((uint32_t)0x00000040)
+#define GPIO_OTYPER_OT_7 ((uint32_t)0x00000080)
+#define GPIO_OTYPER_OT_8 ((uint32_t)0x00000100)
+#define GPIO_OTYPER_OT_9 ((uint32_t)0x00000200)
+#define GPIO_OTYPER_OT_10 ((uint32_t)0x00000400)
+#define GPIO_OTYPER_OT_11 ((uint32_t)0x00000800)
+#define GPIO_OTYPER_OT_12 ((uint32_t)0x00001000)
+#define GPIO_OTYPER_OT_13 ((uint32_t)0x00002000)
+#define GPIO_OTYPER_OT_14 ((uint32_t)0x00004000)
+#define GPIO_OTYPER_OT_15 ((uint32_t)0x00008000)
+
+/**************** Bit definition for GPIO_OSPEEDR register ******************/
+#define GPIO_OSPEEDR_OSPEEDR0 ((uint32_t)0x00000003)
+#define GPIO_OSPEEDR_OSPEEDR0_0 ((uint32_t)0x00000001)
+#define GPIO_OSPEEDR_OSPEEDR0_1 ((uint32_t)0x00000002)
+#define GPIO_OSPEEDR_OSPEEDR1 ((uint32_t)0x0000000C)
+#define GPIO_OSPEEDR_OSPEEDR1_0 ((uint32_t)0x00000004)
+#define GPIO_OSPEEDR_OSPEEDR1_1 ((uint32_t)0x00000008)
+#define GPIO_OSPEEDR_OSPEEDR2 ((uint32_t)0x00000030)
+#define GPIO_OSPEEDR_OSPEEDR2_0 ((uint32_t)0x00000010)
+#define GPIO_OSPEEDR_OSPEEDR2_1 ((uint32_t)0x00000020)
+#define GPIO_OSPEEDR_OSPEEDR3 ((uint32_t)0x000000C0)
+#define GPIO_OSPEEDR_OSPEEDR3_0 ((uint32_t)0x00000040)
+#define GPIO_OSPEEDR_OSPEEDR3_1 ((uint32_t)0x00000080)
+#define GPIO_OSPEEDR_OSPEEDR4 ((uint32_t)0x00000300)
+#define GPIO_OSPEEDR_OSPEEDR4_0 ((uint32_t)0x00000100)
+#define GPIO_OSPEEDR_OSPEEDR4_1 ((uint32_t)0x00000200)
+#define GPIO_OSPEEDR_OSPEEDR5 ((uint32_t)0x00000C00)
+#define GPIO_OSPEEDR_OSPEEDR5_0 ((uint32_t)0x00000400)
+#define GPIO_OSPEEDR_OSPEEDR5_1 ((uint32_t)0x00000800)
+#define GPIO_OSPEEDR_OSPEEDR6 ((uint32_t)0x00003000)
+#define GPIO_OSPEEDR_OSPEEDR6_0 ((uint32_t)0x00001000)
+#define GPIO_OSPEEDR_OSPEEDR6_1 ((uint32_t)0x00002000)
+#define GPIO_OSPEEDR_OSPEEDR7 ((uint32_t)0x0000C000)
+#define GPIO_OSPEEDR_OSPEEDR7_0 ((uint32_t)0x00004000)
+#define GPIO_OSPEEDR_OSPEEDR7_1 ((uint32_t)0x00008000)
+#define GPIO_OSPEEDR_OSPEEDR8 ((uint32_t)0x00030000)
+#define GPIO_OSPEEDR_OSPEEDR8_0 ((uint32_t)0x00010000)
+#define GPIO_OSPEEDR_OSPEEDR8_1 ((uint32_t)0x00020000)
+#define GPIO_OSPEEDR_OSPEEDR9 ((uint32_t)0x000C0000)
+#define GPIO_OSPEEDR_OSPEEDR9_0 ((uint32_t)0x00040000)
+#define GPIO_OSPEEDR_OSPEEDR9_1 ((uint32_t)0x00080000)
+#define GPIO_OSPEEDR_OSPEEDR10 ((uint32_t)0x00300000)
+#define GPIO_OSPEEDR_OSPEEDR10_0 ((uint32_t)0x00100000)
+#define GPIO_OSPEEDR_OSPEEDR10_1 ((uint32_t)0x00200000)
+#define GPIO_OSPEEDR_OSPEEDR11 ((uint32_t)0x00C00000)
+#define GPIO_OSPEEDR_OSPEEDR11_0 ((uint32_t)0x00400000)
+#define GPIO_OSPEEDR_OSPEEDR11_1 ((uint32_t)0x00800000)
+#define GPIO_OSPEEDR_OSPEEDR12 ((uint32_t)0x03000000)
+#define GPIO_OSPEEDR_OSPEEDR12_0 ((uint32_t)0x01000000)
+#define GPIO_OSPEEDR_OSPEEDR12_1 ((uint32_t)0x02000000)
+#define GPIO_OSPEEDR_OSPEEDR13 ((uint32_t)0x0C000000)
+#define GPIO_OSPEEDR_OSPEEDR13_0 ((uint32_t)0x04000000)
+#define GPIO_OSPEEDR_OSPEEDR13_1 ((uint32_t)0x08000000)
+#define GPIO_OSPEEDR_OSPEEDR14 ((uint32_t)0x30000000)
+#define GPIO_OSPEEDR_OSPEEDR14_0 ((uint32_t)0x10000000)
+#define GPIO_OSPEEDR_OSPEEDR14_1 ((uint32_t)0x20000000)
+#define GPIO_OSPEEDR_OSPEEDR15 ((uint32_t)0xC0000000)
+#define GPIO_OSPEEDR_OSPEEDR15_0 ((uint32_t)0x40000000)
+#define GPIO_OSPEEDR_OSPEEDR15_1 ((uint32_t)0x80000000)
+
+/* Old Bit definition for GPIO_OSPEEDR register maintained for legacy purpose */
+#define GPIO_OSPEEDER_OSPEEDR0 GPIO_OSPEEDR_OSPEEDR0
+#define GPIO_OSPEEDER_OSPEEDR0_0 GPIO_OSPEEDR_OSPEEDR0_0
+#define GPIO_OSPEEDER_OSPEEDR0_1 GPIO_OSPEEDR_OSPEEDR0_1
+#define GPIO_OSPEEDER_OSPEEDR1 GPIO_OSPEEDR_OSPEEDR1
+#define GPIO_OSPEEDER_OSPEEDR1_0 GPIO_OSPEEDR_OSPEEDR1_0
+#define GPIO_OSPEEDER_OSPEEDR1_1 GPIO_OSPEEDR_OSPEEDR1_1
+#define GPIO_OSPEEDER_OSPEEDR2 GPIO_OSPEEDR_OSPEEDR2
+#define GPIO_OSPEEDER_OSPEEDR2_0 GPIO_OSPEEDR_OSPEEDR2_0
+#define GPIO_OSPEEDER_OSPEEDR2_1 GPIO_OSPEEDR_OSPEEDR2_1
+#define GPIO_OSPEEDER_OSPEEDR3 GPIO_OSPEEDR_OSPEEDR3
+#define GPIO_OSPEEDER_OSPEEDR3_0 GPIO_OSPEEDR_OSPEEDR3_0
+#define GPIO_OSPEEDER_OSPEEDR3_1 GPIO_OSPEEDR_OSPEEDR3_1
+#define GPIO_OSPEEDER_OSPEEDR4 GPIO_OSPEEDR_OSPEEDR4
+#define GPIO_OSPEEDER_OSPEEDR4_0 GPIO_OSPEEDR_OSPEEDR4_0
+#define GPIO_OSPEEDER_OSPEEDR4_1 GPIO_OSPEEDR_OSPEEDR4_1
+#define GPIO_OSPEEDER_OSPEEDR5 GPIO_OSPEEDR_OSPEEDR5
+#define GPIO_OSPEEDER_OSPEEDR5_0 GPIO_OSPEEDR_OSPEEDR5_0
+#define GPIO_OSPEEDER_OSPEEDR5_1 GPIO_OSPEEDR_OSPEEDR5_1
+#define GPIO_OSPEEDER_OSPEEDR6 GPIO_OSPEEDR_OSPEEDR6
+#define GPIO_OSPEEDER_OSPEEDR6_0 GPIO_OSPEEDR_OSPEEDR6_0
+#define GPIO_OSPEEDER_OSPEEDR6_1 GPIO_OSPEEDR_OSPEEDR6_1
+#define GPIO_OSPEEDER_OSPEEDR7 GPIO_OSPEEDR_OSPEEDR7
+#define GPIO_OSPEEDER_OSPEEDR7_0 GPIO_OSPEEDR_OSPEEDR7_0
+#define GPIO_OSPEEDER_OSPEEDR7_1 GPIO_OSPEEDR_OSPEEDR7_1
+#define GPIO_OSPEEDER_OSPEEDR8 GPIO_OSPEEDR_OSPEEDR8
+#define GPIO_OSPEEDER_OSPEEDR8_0 GPIO_OSPEEDR_OSPEEDR8_0
+#define GPIO_OSPEEDER_OSPEEDR8_1 GPIO_OSPEEDR_OSPEEDR8_1
+#define GPIO_OSPEEDER_OSPEEDR9 GPIO_OSPEEDR_OSPEEDR9
+#define GPIO_OSPEEDER_OSPEEDR9_0 GPIO_OSPEEDR_OSPEEDR9_0
+#define GPIO_OSPEEDER_OSPEEDR9_1 GPIO_OSPEEDR_OSPEEDR9_1
+#define GPIO_OSPEEDER_OSPEEDR10 GPIO_OSPEEDR_OSPEEDR10
+#define GPIO_OSPEEDER_OSPEEDR10_0 GPIO_OSPEEDR_OSPEEDR10_0
+#define GPIO_OSPEEDER_OSPEEDR10_1 GPIO_OSPEEDR_OSPEEDR10_1
+#define GPIO_OSPEEDER_OSPEEDR11 GPIO_OSPEEDR_OSPEEDR11
+#define GPIO_OSPEEDER_OSPEEDR11_0 GPIO_OSPEEDR_OSPEEDR11_0
+#define GPIO_OSPEEDER_OSPEEDR11_1 GPIO_OSPEEDR_OSPEEDR11_1
+#define GPIO_OSPEEDER_OSPEEDR12 GPIO_OSPEEDR_OSPEEDR12
+#define GPIO_OSPEEDER_OSPEEDR12_0 GPIO_OSPEEDR_OSPEEDR12_0
+#define GPIO_OSPEEDER_OSPEEDR12_1 GPIO_OSPEEDR_OSPEEDR12_1
+#define GPIO_OSPEEDER_OSPEEDR13 GPIO_OSPEEDR_OSPEEDR13
+#define GPIO_OSPEEDER_OSPEEDR13_0 GPIO_OSPEEDR_OSPEEDR13_0
+#define GPIO_OSPEEDER_OSPEEDR13_1 GPIO_OSPEEDR_OSPEEDR13_1
+#define GPIO_OSPEEDER_OSPEEDR14 GPIO_OSPEEDR_OSPEEDR14
+#define GPIO_OSPEEDER_OSPEEDR14_0 GPIO_OSPEEDR_OSPEEDR14_0
+#define GPIO_OSPEEDER_OSPEEDR14_1 GPIO_OSPEEDR_OSPEEDR14_1
+#define GPIO_OSPEEDER_OSPEEDR15 GPIO_OSPEEDR_OSPEEDR15
+#define GPIO_OSPEEDER_OSPEEDR15_0 GPIO_OSPEEDR_OSPEEDR15_0
+#define GPIO_OSPEEDER_OSPEEDR15_1 GPIO_OSPEEDR_OSPEEDR15_1
+
+/******************* Bit definition for GPIO_PUPDR register ******************/
+#define GPIO_PUPDR_PUPDR0 ((uint32_t)0x00000003)
+#define GPIO_PUPDR_PUPDR0_0 ((uint32_t)0x00000001)
+#define GPIO_PUPDR_PUPDR0_1 ((uint32_t)0x00000002)
+#define GPIO_PUPDR_PUPDR1 ((uint32_t)0x0000000C)
+#define GPIO_PUPDR_PUPDR1_0 ((uint32_t)0x00000004)
+#define GPIO_PUPDR_PUPDR1_1 ((uint32_t)0x00000008)
+#define GPIO_PUPDR_PUPDR2 ((uint32_t)0x00000030)
+#define GPIO_PUPDR_PUPDR2_0 ((uint32_t)0x00000010)
+#define GPIO_PUPDR_PUPDR2_1 ((uint32_t)0x00000020)
+#define GPIO_PUPDR_PUPDR3 ((uint32_t)0x000000C0)
+#define GPIO_PUPDR_PUPDR3_0 ((uint32_t)0x00000040)
+#define GPIO_PUPDR_PUPDR3_1 ((uint32_t)0x00000080)
+#define GPIO_PUPDR_PUPDR4 ((uint32_t)0x00000300)
+#define GPIO_PUPDR_PUPDR4_0 ((uint32_t)0x00000100)
+#define GPIO_PUPDR_PUPDR4_1 ((uint32_t)0x00000200)
+#define GPIO_PUPDR_PUPDR5 ((uint32_t)0x00000C00)
+#define GPIO_PUPDR_PUPDR5_0 ((uint32_t)0x00000400)
+#define GPIO_PUPDR_PUPDR5_1 ((uint32_t)0x00000800)
+#define GPIO_PUPDR_PUPDR6 ((uint32_t)0x00003000)
+#define GPIO_PUPDR_PUPDR6_0 ((uint32_t)0x00001000)
+#define GPIO_PUPDR_PUPDR6_1 ((uint32_t)0x00002000)
+#define GPIO_PUPDR_PUPDR7 ((uint32_t)0x0000C000)
+#define GPIO_PUPDR_PUPDR7_0 ((uint32_t)0x00004000)
+#define GPIO_PUPDR_PUPDR7_1 ((uint32_t)0x00008000)
+#define GPIO_PUPDR_PUPDR8 ((uint32_t)0x00030000)
+#define GPIO_PUPDR_PUPDR8_0 ((uint32_t)0x00010000)
+#define GPIO_PUPDR_PUPDR8_1 ((uint32_t)0x00020000)
+#define GPIO_PUPDR_PUPDR9 ((uint32_t)0x000C0000)
+#define GPIO_PUPDR_PUPDR9_0 ((uint32_t)0x00040000)
+#define GPIO_PUPDR_PUPDR9_1 ((uint32_t)0x00080000)
+#define GPIO_PUPDR_PUPDR10 ((uint32_t)0x00300000)
+#define GPIO_PUPDR_PUPDR10_0 ((uint32_t)0x00100000)
+#define GPIO_PUPDR_PUPDR10_1 ((uint32_t)0x00200000)
+#define GPIO_PUPDR_PUPDR11 ((uint32_t)0x00C00000)
+#define GPIO_PUPDR_PUPDR11_0 ((uint32_t)0x00400000)
+#define GPIO_PUPDR_PUPDR11_1 ((uint32_t)0x00800000)
+#define GPIO_PUPDR_PUPDR12 ((uint32_t)0x03000000)
+#define GPIO_PUPDR_PUPDR12_0 ((uint32_t)0x01000000)
+#define GPIO_PUPDR_PUPDR12_1 ((uint32_t)0x02000000)
+#define GPIO_PUPDR_PUPDR13 ((uint32_t)0x0C000000)
+#define GPIO_PUPDR_PUPDR13_0 ((uint32_t)0x04000000)
+#define GPIO_PUPDR_PUPDR13_1 ((uint32_t)0x08000000)
+#define GPIO_PUPDR_PUPDR14 ((uint32_t)0x30000000)
+#define GPIO_PUPDR_PUPDR14_0 ((uint32_t)0x10000000)
+#define GPIO_PUPDR_PUPDR14_1 ((uint32_t)0x20000000)
+#define GPIO_PUPDR_PUPDR15 ((uint32_t)0xC0000000)
+#define GPIO_PUPDR_PUPDR15_0 ((uint32_t)0x40000000)
+#define GPIO_PUPDR_PUPDR15_1 ((uint32_t)0x80000000)
+
+/******************* Bit definition for GPIO_IDR register *******************/
+#define GPIO_IDR_0 ((uint32_t)0x00000001)
+#define GPIO_IDR_1 ((uint32_t)0x00000002)
+#define GPIO_IDR_2 ((uint32_t)0x00000004)
+#define GPIO_IDR_3 ((uint32_t)0x00000008)
+#define GPIO_IDR_4 ((uint32_t)0x00000010)
+#define GPIO_IDR_5 ((uint32_t)0x00000020)
+#define GPIO_IDR_6 ((uint32_t)0x00000040)
+#define GPIO_IDR_7 ((uint32_t)0x00000080)
+#define GPIO_IDR_8 ((uint32_t)0x00000100)
+#define GPIO_IDR_9 ((uint32_t)0x00000200)
+#define GPIO_IDR_10 ((uint32_t)0x00000400)
+#define GPIO_IDR_11 ((uint32_t)0x00000800)
+#define GPIO_IDR_12 ((uint32_t)0x00001000)
+#define GPIO_IDR_13 ((uint32_t)0x00002000)
+#define GPIO_IDR_14 ((uint32_t)0x00004000)
+#define GPIO_IDR_15 ((uint32_t)0x00008000)
+
+/****************** Bit definition for GPIO_ODR register ********************/
+#define GPIO_ODR_0 ((uint32_t)0x00000001)
+#define GPIO_ODR_1 ((uint32_t)0x00000002)
+#define GPIO_ODR_2 ((uint32_t)0x00000004)
+#define GPIO_ODR_3 ((uint32_t)0x00000008)
+#define GPIO_ODR_4 ((uint32_t)0x00000010)
+#define GPIO_ODR_5 ((uint32_t)0x00000020)
+#define GPIO_ODR_6 ((uint32_t)0x00000040)
+#define GPIO_ODR_7 ((uint32_t)0x00000080)
+#define GPIO_ODR_8 ((uint32_t)0x00000100)
+#define GPIO_ODR_9 ((uint32_t)0x00000200)
+#define GPIO_ODR_10 ((uint32_t)0x00000400)
+#define GPIO_ODR_11 ((uint32_t)0x00000800)
+#define GPIO_ODR_12 ((uint32_t)0x00001000)
+#define GPIO_ODR_13 ((uint32_t)0x00002000)
+#define GPIO_ODR_14 ((uint32_t)0x00004000)
+#define GPIO_ODR_15 ((uint32_t)0x00008000)
+
+/****************** Bit definition for GPIO_BSRR register ********************/
+#define GPIO_BSRR_BS_0 ((uint32_t)0x00000001)
+#define GPIO_BSRR_BS_1 ((uint32_t)0x00000002)
+#define GPIO_BSRR_BS_2 ((uint32_t)0x00000004)
+#define GPIO_BSRR_BS_3 ((uint32_t)0x00000008)
+#define GPIO_BSRR_BS_4 ((uint32_t)0x00000010)
+#define GPIO_BSRR_BS_5 ((uint32_t)0x00000020)
+#define GPIO_BSRR_BS_6 ((uint32_t)0x00000040)
+#define GPIO_BSRR_BS_7 ((uint32_t)0x00000080)
+#define GPIO_BSRR_BS_8 ((uint32_t)0x00000100)
+#define GPIO_BSRR_BS_9 ((uint32_t)0x00000200)
+#define GPIO_BSRR_BS_10 ((uint32_t)0x00000400)
+#define GPIO_BSRR_BS_11 ((uint32_t)0x00000800)
+#define GPIO_BSRR_BS_12 ((uint32_t)0x00001000)
+#define GPIO_BSRR_BS_13 ((uint32_t)0x00002000)
+#define GPIO_BSRR_BS_14 ((uint32_t)0x00004000)
+#define GPIO_BSRR_BS_15 ((uint32_t)0x00008000)
+#define GPIO_BSRR_BR_0 ((uint32_t)0x00010000)
+#define GPIO_BSRR_BR_1 ((uint32_t)0x00020000)
+#define GPIO_BSRR_BR_2 ((uint32_t)0x00040000)
+#define GPIO_BSRR_BR_3 ((uint32_t)0x00080000)
+#define GPIO_BSRR_BR_4 ((uint32_t)0x00100000)
+#define GPIO_BSRR_BR_5 ((uint32_t)0x00200000)
+#define GPIO_BSRR_BR_6 ((uint32_t)0x00400000)
+#define GPIO_BSRR_BR_7 ((uint32_t)0x00800000)
+#define GPIO_BSRR_BR_8 ((uint32_t)0x01000000)
+#define GPIO_BSRR_BR_9 ((uint32_t)0x02000000)
+#define GPIO_BSRR_BR_10 ((uint32_t)0x04000000)
+#define GPIO_BSRR_BR_11 ((uint32_t)0x08000000)
+#define GPIO_BSRR_BR_12 ((uint32_t)0x10000000)
+#define GPIO_BSRR_BR_13 ((uint32_t)0x20000000)
+#define GPIO_BSRR_BR_14 ((uint32_t)0x40000000)
+#define GPIO_BSRR_BR_15 ((uint32_t)0x80000000)
+
+/****************** Bit definition for GPIO_LCKR register ********************/
+#define GPIO_LCKR_LCK0 ((uint32_t)0x00000001)
+#define GPIO_LCKR_LCK1 ((uint32_t)0x00000002)
+#define GPIO_LCKR_LCK2 ((uint32_t)0x00000004)
+#define GPIO_LCKR_LCK3 ((uint32_t)0x00000008)
+#define GPIO_LCKR_LCK4 ((uint32_t)0x00000010)
+#define GPIO_LCKR_LCK5 ((uint32_t)0x00000020)
+#define GPIO_LCKR_LCK6 ((uint32_t)0x00000040)
+#define GPIO_LCKR_LCK7 ((uint32_t)0x00000080)
+#define GPIO_LCKR_LCK8 ((uint32_t)0x00000100)
+#define GPIO_LCKR_LCK9 ((uint32_t)0x00000200)
+#define GPIO_LCKR_LCK10 ((uint32_t)0x00000400)
+#define GPIO_LCKR_LCK11 ((uint32_t)0x00000800)
+#define GPIO_LCKR_LCK12 ((uint32_t)0x00001000)
+#define GPIO_LCKR_LCK13 ((uint32_t)0x00002000)
+#define GPIO_LCKR_LCK14 ((uint32_t)0x00004000)
+#define GPIO_LCKR_LCK15 ((uint32_t)0x00008000)
+#define GPIO_LCKR_LCKK ((uint32_t)0x00010000)
+
+/****************** Bit definition for GPIO_AFRL register ********************/
+#define GPIO_AFRL_AFRL0 ((uint32_t)0x0000000F)
+#define GPIO_AFRL_AFRL1 ((uint32_t)0x000000F0)
+#define GPIO_AFRL_AFRL2 ((uint32_t)0x00000F00)
+#define GPIO_AFRL_AFRL3 ((uint32_t)0x0000F000)
+#define GPIO_AFRL_AFRL4 ((uint32_t)0x000F0000)
+#define GPIO_AFRL_AFRL5 ((uint32_t)0x00F00000)
+#define GPIO_AFRL_AFRL6 ((uint32_t)0x0F000000)
+#define GPIO_AFRL_AFRL7 ((uint32_t)0xF0000000)
+
+/****************** Bit definition for GPIO_AFRH register ********************/
+#define GPIO_AFRH_AFRH0 ((uint32_t)0x0000000F)
+#define GPIO_AFRH_AFRH1 ((uint32_t)0x000000F0)
+#define GPIO_AFRH_AFRH2 ((uint32_t)0x00000F00)
+#define GPIO_AFRH_AFRH3 ((uint32_t)0x0000F000)
+#define GPIO_AFRH_AFRH4 ((uint32_t)0x000F0000)
+#define GPIO_AFRH_AFRH5 ((uint32_t)0x00F00000)
+#define GPIO_AFRH_AFRH6 ((uint32_t)0x0F000000)
+#define GPIO_AFRH_AFRH7 ((uint32_t)0xF0000000)
+
+/****************** Bit definition for GPIO_BRR register *********************/
+#define GPIO_BRR_BR_0 ((uint32_t)0x00000001)
+#define GPIO_BRR_BR_1 ((uint32_t)0x00000002)
+#define GPIO_BRR_BR_2 ((uint32_t)0x00000004)
+#define GPIO_BRR_BR_3 ((uint32_t)0x00000008)
+#define GPIO_BRR_BR_4 ((uint32_t)0x00000010)
+#define GPIO_BRR_BR_5 ((uint32_t)0x00000020)
+#define GPIO_BRR_BR_6 ((uint32_t)0x00000040)
+#define GPIO_BRR_BR_7 ((uint32_t)0x00000080)
+#define GPIO_BRR_BR_8 ((uint32_t)0x00000100)
+#define GPIO_BRR_BR_9 ((uint32_t)0x00000200)
+#define GPIO_BRR_BR_10 ((uint32_t)0x00000400)
+#define GPIO_BRR_BR_11 ((uint32_t)0x00000800)
+#define GPIO_BRR_BR_12 ((uint32_t)0x00001000)
+#define GPIO_BRR_BR_13 ((uint32_t)0x00002000)
+#define GPIO_BRR_BR_14 ((uint32_t)0x00004000)
+#define GPIO_BRR_BR_15 ((uint32_t)0x00008000)
+
+/******************************************************************************/
+/* */
+/* Inter-integrated Circuit Interface (I2C) */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for I2C_CR1 register *******************/
+#define I2C_CR1_PE ((uint32_t)0x00000001) /*!< Peripheral enable */
+#define I2C_CR1_TXIE ((uint32_t)0x00000002) /*!< TX interrupt enable */
+#define I2C_CR1_RXIE ((uint32_t)0x00000004) /*!< RX interrupt enable */
+#define I2C_CR1_ADDRIE ((uint32_t)0x00000008) /*!< Address match interrupt enable */
+#define I2C_CR1_NACKIE ((uint32_t)0x00000010) /*!< NACK received interrupt enable */
+#define I2C_CR1_STOPIE ((uint32_t)0x00000020) /*!< STOP detection interrupt enable */
+#define I2C_CR1_TCIE ((uint32_t)0x00000040) /*!< Transfer complete interrupt enable */
+#define I2C_CR1_ERRIE ((uint32_t)0x00000080) /*!< Errors interrupt enable */
+#define I2C_CR1_DFN ((uint32_t)0x00000F00) /*!< Digital noise filter */
+#define I2C_CR1_ANFOFF ((uint32_t)0x00001000) /*!< Analog noise filter OFF */
+#define I2C_CR1_SWRST ((uint32_t)0x00002000) /*!< Software reset */
+#define I2C_CR1_TXDMAEN ((uint32_t)0x00004000) /*!< DMA transmission requests enable */
+#define I2C_CR1_RXDMAEN ((uint32_t)0x00008000) /*!< DMA reception requests enable */
+#define I2C_CR1_SBC ((uint32_t)0x00010000) /*!< Slave byte control */
+#define I2C_CR1_NOSTRETCH ((uint32_t)0x00020000) /*!< Clock stretching disable */
+#define I2C_CR1_WUPEN ((uint32_t)0x00040000) /*!< Wakeup from STOP enable */
+#define I2C_CR1_GCEN ((uint32_t)0x00080000) /*!< General call enable */
+#define I2C_CR1_SMBHEN ((uint32_t)0x00100000) /*!< SMBus host address enable */
+#define I2C_CR1_SMBDEN ((uint32_t)0x00200000) /*!< SMBus device default address enable */
+#define I2C_CR1_ALERTEN ((uint32_t)0x00400000) /*!< SMBus alert enable */
+#define I2C_CR1_PECEN ((uint32_t)0x00800000) /*!< PEC enable */
+
+/****************** Bit definition for I2C_CR2 register ********************/
+#define I2C_CR2_SADD ((uint32_t)0x000003FF) /*!< Slave address (master mode) */
+#define I2C_CR2_RD_WRN ((uint32_t)0x00000400) /*!< Transfer direction (master mode) */
+#define I2C_CR2_ADD10 ((uint32_t)0x00000800) /*!< 10-bit addressing mode (master mode) */
+#define I2C_CR2_HEAD10R ((uint32_t)0x00001000) /*!< 10-bit address header only read direction (master mode) */
+#define I2C_CR2_START ((uint32_t)0x00002000) /*!< START generation */
+#define I2C_CR2_STOP ((uint32_t)0x00004000) /*!< STOP generation (master mode) */
+#define I2C_CR2_NACK ((uint32_t)0x00008000) /*!< NACK generation (slave mode) */
+#define I2C_CR2_NBYTES ((uint32_t)0x00FF0000) /*!< Number of bytes */
+#define I2C_CR2_RELOAD ((uint32_t)0x01000000) /*!< NBYTES reload mode */
+#define I2C_CR2_AUTOEND ((uint32_t)0x02000000) /*!< Automatic end mode (master mode) */
+#define I2C_CR2_PECBYTE ((uint32_t)0x04000000) /*!< Packet error checking byte */
+
+/******************* Bit definition for I2C_OAR1 register ******************/
+#define I2C_OAR1_OA1 ((uint32_t)0x000003FF) /*!< Interface own address 1 */
+#define I2C_OAR1_OA1MODE ((uint32_t)0x00000400) /*!< Own address 1 10-bit mode */
+#define I2C_OAR1_OA1EN ((uint32_t)0x00008000) /*!< Own address 1 enable */
+
+/******************* Bit definition for I2C_OAR2 register ******************/
+#define I2C_OAR2_OA2 ((uint32_t)0x000000FE) /*!< Interface own address 2 */
+#define I2C_OAR2_OA2MSK ((uint32_t)0x00000700) /*!< Own address 2 masks */
+#define I2C_OAR2_OA2EN ((uint32_t)0x00008000) /*!< Own address 2 enable */
+
+/******************* Bit definition for I2C_TIMINGR register ****************/
+#define I2C_TIMINGR_SCLL ((uint32_t)0x000000FF) /*!< SCL low period (master mode) */
+#define I2C_TIMINGR_SCLH ((uint32_t)0x0000FF00) /*!< SCL high period (master mode) */
+#define I2C_TIMINGR_SDADEL ((uint32_t)0x000F0000) /*!< Data hold time */
+#define I2C_TIMINGR_SCLDEL ((uint32_t)0x00F00000) /*!< Data setup time */
+#define I2C_TIMINGR_PRESC ((uint32_t)0xF0000000) /*!< Timings prescaler */
+
+/******************* Bit definition for I2C_TIMEOUTR register ****************/
+#define I2C_TIMEOUTR_TIMEOUTA ((uint32_t)0x00000FFF) /*!< Bus timeout A */
+#define I2C_TIMEOUTR_TIDLE ((uint32_t)0x00001000) /*!< Idle clock timeout detection */
+#define I2C_TIMEOUTR_TIMOUTEN ((uint32_t)0x00008000) /*!< Clock timeout enable */
+#define I2C_TIMEOUTR_TIMEOUTB ((uint32_t)0x0FFF0000) /*!< Bus timeout B*/
+#define I2C_TIMEOUTR_TEXTEN ((uint32_t)0x80000000) /*!< Extended clock timeout enable */
+
+/****************** Bit definition for I2C_ISR register ********************/
+#define I2C_ISR_TXE ((uint32_t)0x00000001) /*!< Transmit data register empty */
+#define I2C_ISR_TXIS ((uint32_t)0x00000002) /*!< Transmit interrupt status */
+#define I2C_ISR_RXNE ((uint32_t)0x00000004) /*!< Receive data register not empty */
+#define I2C_ISR_ADDR ((uint32_t)0x00000008) /*!< Address matched (slave mode)*/
+#define I2C_ISR_NACKF ((uint32_t)0x00000010) /*!< NACK received flag */
+#define I2C_ISR_STOPF ((uint32_t)0x00000020) /*!< STOP detection flag */
+#define I2C_ISR_TC ((uint32_t)0x00000040) /*!< Transfer complete (master mode) */
+#define I2C_ISR_TCR ((uint32_t)0x00000080) /*!< Transfer complete reload */
+#define I2C_ISR_BERR ((uint32_t)0x00000100) /*!< Bus error */
+#define I2C_ISR_ARLO ((uint32_t)0x00000200) /*!< Arbitration lost */
+#define I2C_ISR_OVR ((uint32_t)0x00000400) /*!< Overrun/Underrun */
+#define I2C_ISR_PECERR ((uint32_t)0x00000800) /*!< PEC error in reception */
+#define I2C_ISR_TIMEOUT ((uint32_t)0x00001000) /*!< Timeout or Tlow detection flag */
+#define I2C_ISR_ALERT ((uint32_t)0x00002000) /*!< SMBus alert */
+#define I2C_ISR_BUSY ((uint32_t)0x00008000) /*!< Bus busy */
+#define I2C_ISR_DIR ((uint32_t)0x00010000) /*!< Transfer direction (slave mode) */
+#define I2C_ISR_ADDCODE ((uint32_t)0x00FE0000) /*!< Address match code (slave mode) */
+
+/****************** Bit definition for I2C_ICR register ********************/
+#define I2C_ICR_ADDRCF ((uint32_t)0x00000008) /*!< Address matched clear flag */
+#define I2C_ICR_NACKCF ((uint32_t)0x00000010) /*!< NACK clear flag */
+#define I2C_ICR_STOPCF ((uint32_t)0x00000020) /*!< STOP detection clear flag */
+#define I2C_ICR_BERRCF ((uint32_t)0x00000100) /*!< Bus error clear flag */
+#define I2C_ICR_ARLOCF ((uint32_t)0x00000200) /*!< Arbitration lost clear flag */
+#define I2C_ICR_OVRCF ((uint32_t)0x00000400) /*!< Overrun/Underrun clear flag */
+#define I2C_ICR_PECCF ((uint32_t)0x00000800) /*!< PAC error clear flag */
+#define I2C_ICR_TIMOUTCF ((uint32_t)0x00001000) /*!< Timeout clear flag */
+#define I2C_ICR_ALERTCF ((uint32_t)0x00002000) /*!< Alert clear flag */
+
+/****************** Bit definition for I2C_PECR register *******************/
+#define I2C_PECR_PEC ((uint32_t)0x000000FF) /*!< PEC register */
+
+/****************** Bit definition for I2C_RXDR register *********************/
+#define I2C_RXDR_RXDATA ((uint32_t)0x000000FF) /*!< 8-bit receive data */
+
+/****************** Bit definition for I2C_TXDR register *******************/
+#define I2C_TXDR_TXDATA ((uint32_t)0x000000FF) /*!< 8-bit transmit data */
+
+/*****************************************************************************/
+/* */
+/* Independent WATCHDOG (IWDG) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for IWDG_KR register *******************/
+#define IWDG_KR_KEY ((uint32_t)0xFFFF) /*!< Key value (write only, read 0000h) */
+
+/******************* Bit definition for IWDG_PR register *******************/
+#define IWDG_PR_PR ((uint32_t)0x07) /*!< PR[2:0] (Prescaler divider) */
+#define IWDG_PR_PR_0 ((uint32_t)0x01) /*!< Bit 0 */
+#define IWDG_PR_PR_1 ((uint32_t)0x02) /*!< Bit 1 */
+#define IWDG_PR_PR_2 ((uint32_t)0x04) /*!< Bit 2 */
+
+/******************* Bit definition for IWDG_RLR register ******************/
+#define IWDG_RLR_RL ((uint32_t)0x0FFF) /*!< Watchdog counter reload value */
+
+/******************* Bit definition for IWDG_SR register *******************/
+#define IWDG_SR_PVU ((uint32_t)0x01) /*!< Watchdog prescaler value update */
+#define IWDG_SR_RVU ((uint32_t)0x02) /*!< Watchdog counter reload value update */
+#define IWDG_SR_WVU ((uint32_t)0x04) /*!< Watchdog counter window value update */
+
+/******************* Bit definition for IWDG_KR register *******************/
+#define IWDG_WINR_WIN ((uint32_t)0x0FFF) /*!< Watchdog counter window value */
+
+/*****************************************************************************/
+/* */
+/* Power Control (PWR) */
+/* */
+/*****************************************************************************/
+
+/******************** Bit definition for PWR_CR register *******************/
+#define PWR_CR_LPDS ((uint32_t)0x00000001) /*!< Low-power Deepsleep */
+#define PWR_CR_PDDS ((uint32_t)0x00000002) /*!< Power Down Deepsleep */
+#define PWR_CR_CWUF ((uint32_t)0x00000004) /*!< Clear Wakeup Flag */
+#define PWR_CR_CSBF ((uint32_t)0x00000008) /*!< Clear Standby Flag */
+#define PWR_CR_PVDE ((uint32_t)0x00000010) /*!< Power Voltage Detector Enable */
+
+#define PWR_CR_PLS ((uint32_t)0x000000E0) /*!< PLS[2:0] bits (PVD Level Selection) */
+#define PWR_CR_PLS_0 ((uint32_t)0x00000020) /*!< Bit 0 */
+#define PWR_CR_PLS_1 ((uint32_t)0x00000040) /*!< Bit 1 */
+#define PWR_CR_PLS_2 ((uint32_t)0x00000080) /*!< Bit 2 */
+
+/*!< PVD level configuration */
+#define PWR_CR_PLS_LEV0 ((uint32_t)0x00000000) /*!< PVD level 0 */
+#define PWR_CR_PLS_LEV1 ((uint32_t)0x00000020) /*!< PVD level 1 */
+#define PWR_CR_PLS_LEV2 ((uint32_t)0x00000040) /*!< PVD level 2 */
+#define PWR_CR_PLS_LEV3 ((uint32_t)0x00000060) /*!< PVD level 3 */
+#define PWR_CR_PLS_LEV4 ((uint32_t)0x00000080) /*!< PVD level 4 */
+#define PWR_CR_PLS_LEV5 ((uint32_t)0x000000A0) /*!< PVD level 5 */
+#define PWR_CR_PLS_LEV6 ((uint32_t)0x000000C0) /*!< PVD level 6 */
+#define PWR_CR_PLS_LEV7 ((uint32_t)0x000000E0) /*!< PVD level 7 */
+
+#define PWR_CR_DBP ((uint32_t)0x00000100) /*!< Disable Backup Domain write protection */
+
+/******************* Bit definition for PWR_CSR register *******************/
+#define PWR_CSR_WUF ((uint32_t)0x00000001) /*!< Wakeup Flag */
+#define PWR_CSR_SBF ((uint32_t)0x00000002) /*!< Standby Flag */
+#define PWR_CSR_PVDO ((uint32_t)0x00000004) /*!< PVD Output */
+#define PWR_CSR_VREFINTRDYF ((uint32_t)0x00000008) /*!< Internal voltage reference (VREFINT) ready flag */
+
+#define PWR_CSR_EWUP1 ((uint32_t)0x00000100) /*!< Enable WKUP pin 1 */
+#define PWR_CSR_EWUP2 ((uint32_t)0x00000200) /*!< Enable WKUP pin 2 */
+#define PWR_CSR_EWUP3 ((uint32_t)0x00000400) /*!< Enable WKUP pin 3 */
+#define PWR_CSR_EWUP4 ((uint32_t)0x00000800) /*!< Enable WKUP pin 4 */
+#define PWR_CSR_EWUP5 ((uint32_t)0x00001000) /*!< Enable WKUP pin 5 */
+#define PWR_CSR_EWUP6 ((uint32_t)0x00002000) /*!< Enable WKUP pin 6 */
+#define PWR_CSR_EWUP7 ((uint32_t)0x00004000) /*!< Enable WKUP pin 7 */
+#define PWR_CSR_EWUP8 ((uint32_t)0x00008000) /*!< Enable WKUP pin 8 */
+
+/*****************************************************************************/
+/* */
+/* Reset and Clock Control */
+/* */
+/*****************************************************************************/
+
+/******************** Bit definition for RCC_CR register *******************/
+#define RCC_CR_HSION ((uint32_t)0x00000001) /*!< Internal High Speed clock enable */
+#define RCC_CR_HSIRDY ((uint32_t)0x00000002) /*!< Internal High Speed clock ready flag */
+
+#define RCC_CR_HSITRIM ((uint32_t)0x000000F8) /*!< Internal High Speed clock trimming */
+#define RCC_CR_HSITRIM_0 ((uint32_t)0x00000008) /*!<Bit 0 */
+#define RCC_CR_HSITRIM_1 ((uint32_t)0x00000010) /*!<Bit 1 */
+#define RCC_CR_HSITRIM_2 ((uint32_t)0x00000020) /*!<Bit 2 */
+#define RCC_CR_HSITRIM_3 ((uint32_t)0x00000040) /*!<Bit 3 */
+#define RCC_CR_HSITRIM_4 ((uint32_t)0x00000080) /*!<Bit 4 */
+
+#define RCC_CR_HSICAL ((uint32_t)0x0000FF00) /*!< Internal High Speed clock Calibration */
+#define RCC_CR_HSICAL_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define RCC_CR_HSICAL_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define RCC_CR_HSICAL_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define RCC_CR_HSICAL_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define RCC_CR_HSICAL_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+#define RCC_CR_HSICAL_5 ((uint32_t)0x00002000) /*!<Bit 5 */
+#define RCC_CR_HSICAL_6 ((uint32_t)0x00004000) /*!<Bit 6 */
+#define RCC_CR_HSICAL_7 ((uint32_t)0x00008000) /*!<Bit 7 */
+
+#define RCC_CR_HSEON ((uint32_t)0x00010000) /*!< External High Speed clock enable */
+#define RCC_CR_HSERDY ((uint32_t)0x00020000) /*!< External High Speed clock ready flag */
+#define RCC_CR_HSEBYP ((uint32_t)0x00040000) /*!< External High Speed clock Bypass */
+#define RCC_CR_CSSON ((uint32_t)0x00080000) /*!< Clock Security System enable */
+#define RCC_CR_PLLON ((uint32_t)0x01000000) /*!< PLL enable */
+#define RCC_CR_PLLRDY ((uint32_t)0x02000000) /*!< PLL clock ready flag */
+
+/******************** Bit definition for RCC_CFGR register *****************/
+/*!< SW configuration */
+#define RCC_CFGR_SW ((uint32_t)0x00000003) /*!< SW[1:0] bits (System clock Switch) */
+#define RCC_CFGR_SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR_SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+#define RCC_CFGR_SW_HSI ((uint32_t)0x00000000) /*!< HSI selected as system clock */
+#define RCC_CFGR_SW_HSE ((uint32_t)0x00000001) /*!< HSE selected as system clock */
+#define RCC_CFGR_SW_PLL ((uint32_t)0x00000002) /*!< PLL selected as system clock */
+#define RCC_CFGR_SW_HSI48 ((uint32_t)0x00000003) /*!< HSI48 selected as system clock */
+
+/*!< SWS configuration */
+#define RCC_CFGR_SWS ((uint32_t)0x0000000C) /*!< SWS[1:0] bits (System Clock Switch Status) */
+#define RCC_CFGR_SWS_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define RCC_CFGR_SWS_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+
+#define RCC_CFGR_SWS_HSI ((uint32_t)0x00000000) /*!< HSI oscillator used as system clock */
+#define RCC_CFGR_SWS_HSE ((uint32_t)0x00000004) /*!< HSE oscillator used as system clock */
+#define RCC_CFGR_SWS_PLL ((uint32_t)0x00000008) /*!< PLL used as system clock */
+#define RCC_CFGR_SWS_HSI48 ((uint32_t)0x0000000C) /*!< HSI48 oscillator used as system clock */
+
+/*!< HPRE configuration */
+#define RCC_CFGR_HPRE ((uint32_t)0x000000F0) /*!< HPRE[3:0] bits (AHB prescaler) */
+#define RCC_CFGR_HPRE_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define RCC_CFGR_HPRE_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define RCC_CFGR_HPRE_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+#define RCC_CFGR_HPRE_3 ((uint32_t)0x00000080) /*!< Bit 3 */
+
+#define RCC_CFGR_HPRE_DIV1 ((uint32_t)0x00000000) /*!< SYSCLK not divided */
+#define RCC_CFGR_HPRE_DIV2 ((uint32_t)0x00000080) /*!< SYSCLK divided by 2 */
+#define RCC_CFGR_HPRE_DIV4 ((uint32_t)0x00000090) /*!< SYSCLK divided by 4 */
+#define RCC_CFGR_HPRE_DIV8 ((uint32_t)0x000000A0) /*!< SYSCLK divided by 8 */
+#define RCC_CFGR_HPRE_DIV16 ((uint32_t)0x000000B0) /*!< SYSCLK divided by 16 */
+#define RCC_CFGR_HPRE_DIV64 ((uint32_t)0x000000C0) /*!< SYSCLK divided by 64 */
+#define RCC_CFGR_HPRE_DIV128 ((uint32_t)0x000000D0) /*!< SYSCLK divided by 128 */
+#define RCC_CFGR_HPRE_DIV256 ((uint32_t)0x000000E0) /*!< SYSCLK divided by 256 */
+#define RCC_CFGR_HPRE_DIV512 ((uint32_t)0x000000F0) /*!< SYSCLK divided by 512 */
+
+/*!< PPRE configuration */
+#define RCC_CFGR_PPRE ((uint32_t)0x00000700) /*!< PRE[2:0] bits (APB prescaler) */
+#define RCC_CFGR_PPRE_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define RCC_CFGR_PPRE_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define RCC_CFGR_PPRE_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+
+#define RCC_CFGR_PPRE_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */
+#define RCC_CFGR_PPRE_DIV2 ((uint32_t)0x00000400) /*!< HCLK divided by 2 */
+#define RCC_CFGR_PPRE_DIV4 ((uint32_t)0x00000500) /*!< HCLK divided by 4 */
+#define RCC_CFGR_PPRE_DIV8 ((uint32_t)0x00000600) /*!< HCLK divided by 8 */
+#define RCC_CFGR_PPRE_DIV16 ((uint32_t)0x00000700) /*!< HCLK divided by 16 */
+
+/*!< ADCPPRE configuration: obsolete setting for STM32F091xC */
+/*#define RCC_CFGR_ADCPRE ((uint32_t)0x00004000)*/ /*!< ADCPRE bit (ADC prescaler) */
+
+/*#define RCC_CFGR_ADCPRE_DIV2 ((uint32_t)0x00000000)*/ /*!< PCLK divided by 2 */
+/*#define RCC_CFGR_ADCPRE_DIV4 ((uint32_t)0x00004000)*/ /*!< PCLK divided by 4 */
+
+#define RCC_CFGR_PLLSRC ((uint32_t)0x00018000) /*!< PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSI_DIV2 ((uint32_t)0x00000000) /*!< HSI clock divided by 2 selected as PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSI_PREDIV ((uint32_t)0x00008000) /*!< HSI/PREDIV clock selected as PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSE_PREDIV ((uint32_t)0x00010000) /*!< HSE/PREDIV clock selected as PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSI48_PREDIV ((uint32_t)0x00018000) /*!< HSI48/PREDIV clock selected as PLL entry clock source */
+
+#define RCC_CFGR_PLLXTPRE ((uint32_t)0x00020000) /*!< HSE divider for PLL entry */
+#define RCC_CFGR_PLLXTPRE_HSE_PREDIV_DIV1 ((uint32_t)0x00000000) /*!< HSE/PREDIV clock not divided for PLL entry */
+#define RCC_CFGR_PLLXTPRE_HSE_PREDIV_DIV2 ((uint32_t)0x00020000) /*!< HSE/PREDIV clock divided by 2 for PLL entry */
+
+/*!< PLLMUL configuration */
+#define RCC_CFGR_PLLMUL ((uint32_t)0x003C0000) /*!< PLLMUL[3:0] bits (PLL multiplication factor) */
+#define RCC_CFGR_PLLMUL_0 ((uint32_t)0x00040000) /*!< Bit 0 */
+#define RCC_CFGR_PLLMUL_1 ((uint32_t)0x00080000) /*!< Bit 1 */
+#define RCC_CFGR_PLLMUL_2 ((uint32_t)0x00100000) /*!< Bit 2 */
+#define RCC_CFGR_PLLMUL_3 ((uint32_t)0x00200000) /*!< Bit 3 */
+
+#define RCC_CFGR_PLLMUL2 ((uint32_t)0x00000000) /*!< PLL input clock*2 */
+#define RCC_CFGR_PLLMUL3 ((uint32_t)0x00040000) /*!< PLL input clock*3 */
+#define RCC_CFGR_PLLMUL4 ((uint32_t)0x00080000) /*!< PLL input clock*4 */
+#define RCC_CFGR_PLLMUL5 ((uint32_t)0x000C0000) /*!< PLL input clock*5 */
+#define RCC_CFGR_PLLMUL6 ((uint32_t)0x00100000) /*!< PLL input clock*6 */
+#define RCC_CFGR_PLLMUL7 ((uint32_t)0x00140000) /*!< PLL input clock*7 */
+#define RCC_CFGR_PLLMUL8 ((uint32_t)0x00180000) /*!< PLL input clock*8 */
+#define RCC_CFGR_PLLMUL9 ((uint32_t)0x001C0000) /*!< PLL input clock*9 */
+#define RCC_CFGR_PLLMUL10 ((uint32_t)0x00200000) /*!< PLL input clock10 */
+#define RCC_CFGR_PLLMUL11 ((uint32_t)0x00240000) /*!< PLL input clock*11 */
+#define RCC_CFGR_PLLMUL12 ((uint32_t)0x00280000) /*!< PLL input clock*12 */
+#define RCC_CFGR_PLLMUL13 ((uint32_t)0x002C0000) /*!< PLL input clock*13 */
+#define RCC_CFGR_PLLMUL14 ((uint32_t)0x00300000) /*!< PLL input clock*14 */
+#define RCC_CFGR_PLLMUL15 ((uint32_t)0x00340000) /*!< PLL input clock*15 */
+#define RCC_CFGR_PLLMUL16 ((uint32_t)0x00380000) /*!< PLL input clock*16 */
+
+/*!< MCO configuration */
+#define RCC_CFGR_MCO ((uint32_t)0x0F000000) /*!< MCO[3:0] bits (Microcontroller Clock Output) */
+#define RCC_CFGR_MCO_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define RCC_CFGR_MCO_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define RCC_CFGR_MCO_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+#define RCC_CFGR_MCO_3 ((uint32_t)0x08000000) /*!< Bit 3 */
+
+#define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
+#define RCC_CFGR_MCO_HSI14 ((uint32_t)0x01000000) /*!< HSI14 clock selected as MCO source */
+#define RCC_CFGR_MCO_LSI ((uint32_t)0x02000000) /*!< LSI clock selected as MCO source */
+#define RCC_CFGR_MCO_LSE ((uint32_t)0x03000000) /*!< LSE clock selected as MCO source */
+#define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x04000000) /*!< System clock selected as MCO source */
+#define RCC_CFGR_MCO_HSI ((uint32_t)0x05000000) /*!< HSI clock selected as MCO source */
+#define RCC_CFGR_MCO_HSE ((uint32_t)0x06000000) /*!< HSE clock selected as MCO source */
+#define RCC_CFGR_MCO_PLL ((uint32_t)0x07000000) /*!< PLL clock divided by 2 selected as MCO source */
+#define RCC_CFGR_MCO_HSI48 ((uint32_t)0x08000000) /*!< HSI48 clock selected as MCO source */
+
+#define RCC_CFGR_MCOPRE ((uint32_t)0x70000000) /*!< MCO prescaler */
+#define RCC_CFGR_MCOPRE_DIV1 ((uint32_t)0x00000000) /*!< MCO is divided by 1 */
+#define RCC_CFGR_MCOPRE_DIV2 ((uint32_t)0x10000000) /*!< MCO is divided by 2 */
+#define RCC_CFGR_MCOPRE_DIV4 ((uint32_t)0x20000000) /*!< MCO is divided by 4 */
+#define RCC_CFGR_MCOPRE_DIV8 ((uint32_t)0x30000000) /*!< MCO is divided by 8 */
+#define RCC_CFGR_MCOPRE_DIV16 ((uint32_t)0x40000000) /*!< MCO is divided by 16 */
+#define RCC_CFGR_MCOPRE_DIV32 ((uint32_t)0x50000000) /*!< MCO is divided by 32 */
+#define RCC_CFGR_MCOPRE_DIV64 ((uint32_t)0x60000000) /*!< MCO is divided by 64 */
+#define RCC_CFGR_MCOPRE_DIV128 ((uint32_t)0x70000000) /*!< MCO is divided by 128 */
+
+#define RCC_CFGR_PLLNODIV ((uint32_t)0x80000000) /*!< PLL is not divided to MCO */
+
+/*!<****************** Bit definition for RCC_CIR register *****************/
+#define RCC_CIR_LSIRDYF ((uint32_t)0x00000001) /*!< LSI Ready Interrupt flag */
+#define RCC_CIR_LSERDYF ((uint32_t)0x00000002) /*!< LSE Ready Interrupt flag */
+#define RCC_CIR_HSIRDYF ((uint32_t)0x00000004) /*!< HSI Ready Interrupt flag */
+#define RCC_CIR_HSERDYF ((uint32_t)0x00000008) /*!< HSE Ready Interrupt flag */
+#define RCC_CIR_PLLRDYF ((uint32_t)0x00000010) /*!< PLL Ready Interrupt flag */
+#define RCC_CIR_HSI14RDYF ((uint32_t)0x00000020) /*!< HSI14 Ready Interrupt flag */
+#define RCC_CIR_HSI48RDYF ((uint32_t)0x00000040) /*!< HSI48 Ready Interrupt flag */
+#define RCC_CIR_CSSF ((uint32_t)0x00000080) /*!< Clock Security System Interrupt flag */
+#define RCC_CIR_LSIRDYIE ((uint32_t)0x00000100) /*!< LSI Ready Interrupt Enable */
+#define RCC_CIR_LSERDYIE ((uint32_t)0x00000200) /*!< LSE Ready Interrupt Enable */
+#define RCC_CIR_HSIRDYIE ((uint32_t)0x00000400) /*!< HSI Ready Interrupt Enable */
+#define RCC_CIR_HSERDYIE ((uint32_t)0x00000800) /*!< HSE Ready Interrupt Enable */
+#define RCC_CIR_PLLRDYIE ((uint32_t)0x00001000) /*!< PLL Ready Interrupt Enable */
+#define RCC_CIR_HSI14RDYIE ((uint32_t)0x00002000) /*!< HSI14 Ready Interrupt Enable */
+#define RCC_CIR_HSI48RDYIE ((uint32_t)0x00004000) /*!< HSI48 Ready Interrupt Enable */
+#define RCC_CIR_LSIRDYC ((uint32_t)0x00010000) /*!< LSI Ready Interrupt Clear */
+#define RCC_CIR_LSERDYC ((uint32_t)0x00020000) /*!< LSE Ready Interrupt Clear */
+#define RCC_CIR_HSIRDYC ((uint32_t)0x00040000) /*!< HSI Ready Interrupt Clear */
+#define RCC_CIR_HSERDYC ((uint32_t)0x00080000) /*!< HSE Ready Interrupt Clear */
+#define RCC_CIR_PLLRDYC ((uint32_t)0x00100000) /*!< PLL Ready Interrupt Clear */
+#define RCC_CIR_HSI14RDYC ((uint32_t)0x00200000) /*!< HSI14 Ready Interrupt Clear */
+#define RCC_CIR_HSI48RDYC ((uint32_t)0x00400000) /*!< HSI48 Ready Interrupt Clear */
+#define RCC_CIR_CSSC ((uint32_t)0x00800000) /*!< Clock Security System Interrupt Clear */
+
+/***************** Bit definition for RCC_APB2RSTR register ****************/
+#define RCC_APB2RSTR_SYSCFGRST ((uint32_t)0x00000001) /*!< SYSCFG clock reset */
+#define RCC_APB2RSTR_ADCRST ((uint32_t)0x00000200) /*!< ADC clock reset */
+#define RCC_APB2RSTR_USART8RST ((uint32_t)0x00000080) /*!< USART8 clock reset */
+#define RCC_APB2RSTR_USART7RST ((uint32_t)0x00000040) /*!< USART7 clock reset */
+#define RCC_APB2RSTR_USART6RST ((uint32_t)0x00000020) /*!< USART6 clock reset */
+#define RCC_APB2RSTR_TIM1RST ((uint32_t)0x00000800) /*!< TIM1 clock reset */
+#define RCC_APB2RSTR_SPI1RST ((uint32_t)0x00001000) /*!< SPI1 clock reset */
+#define RCC_APB2RSTR_USART1RST ((uint32_t)0x00004000) /*!< USART1 clock reset */
+#define RCC_APB2RSTR_TIM15RST ((uint32_t)0x00010000) /*!< TIM15 clock reset */
+#define RCC_APB2RSTR_TIM16RST ((uint32_t)0x00020000) /*!< TIM16 clock reset */
+#define RCC_APB2RSTR_TIM17RST ((uint32_t)0x00040000) /*!< TIM17 clock reset */
+#define RCC_APB2RSTR_DBGMCURST ((uint32_t)0x00400000) /*!< DBGMCU clock reset */
+
+/*!< Old ADC1 clock reset bit definition maintained for legacy purpose */
+#define RCC_APB2RSTR_ADC1RST RCC_APB2RSTR_ADCRST
+
+/***************** Bit definition for RCC_APB1RSTR register ****************/
+#define RCC_APB1RSTR_TIM2RST ((uint32_t)0x00000001) /*!< Timer 2 clock reset */
+#define RCC_APB1RSTR_TIM3RST ((uint32_t)0x00000002) /*!< Timer 3 clock reset */
+#define RCC_APB1RSTR_TIM6RST ((uint32_t)0x00000010) /*!< Timer 6 clock reset */
+#define RCC_APB1RSTR_TIM7RST ((uint32_t)0x00000020) /*!< Timer 7 clock reset */
+#define RCC_APB1RSTR_TIM14RST ((uint32_t)0x00000100) /*!< Timer 14 clock reset */
+#define RCC_APB1RSTR_WWDGRST ((uint32_t)0x00000800) /*!< Window Watchdog clock reset */
+#define RCC_APB1RSTR_SPI2RST ((uint32_t)0x00004000) /*!< SPI2 clock reset */
+#define RCC_APB1RSTR_USART2RST ((uint32_t)0x00020000) /*!< USART 2 clock reset */
+#define RCC_APB1RSTR_USART3RST ((uint32_t)0x00040000) /*!< USART 3 clock reset */
+#define RCC_APB1RSTR_USART4RST ((uint32_t)0x00080000) /*!< USART 4 clock reset */
+#define RCC_APB1RSTR_USART5RST ((uint32_t)0x00100000) /*!< USART 5 clock reset */
+#define RCC_APB1RSTR_I2C1RST ((uint32_t)0x00200000) /*!< I2C 1 clock reset */
+#define RCC_APB1RSTR_I2C2RST ((uint32_t)0x00400000) /*!< I2C 2 clock reset */
+#define RCC_APB1RSTR_CANRST ((uint32_t)0x02000000) /*!< CAN clock reset */
+#define RCC_APB1RSTR_CRSRST ((uint32_t)0x08000000) /*!< CRS clock reset */
+#define RCC_APB1RSTR_PWRRST ((uint32_t)0x10000000) /*!< PWR clock reset */
+#define RCC_APB1RSTR_DACRST ((uint32_t)0x20000000) /*!< DAC clock reset */
+#define RCC_APB1RSTR_CECRST ((uint32_t)0x40000000) /*!< CEC clock reset */
+
+/****************** Bit definition for RCC_AHBENR register *****************/
+#define RCC_AHBENR_DMAEN ((uint32_t)0x00000001) /*!< DMA1 clock enable */
+#define RCC_AHBENR_DMA2EN ((uint32_t)0x00000002) /*!< DMA2 clock enable */
+#define RCC_AHBENR_SRAMEN ((uint32_t)0x00000004) /*!< SRAM interface clock enable */
+#define RCC_AHBENR_FLITFEN ((uint32_t)0x00000010) /*!< FLITF clock enable */
+#define RCC_AHBENR_CRCEN ((uint32_t)0x00000040) /*!< CRC clock enable */
+#define RCC_AHBENR_GPIOAEN ((uint32_t)0x00020000) /*!< GPIOA clock enable */
+#define RCC_AHBENR_GPIOBEN ((uint32_t)0x00040000) /*!< GPIOB clock enable */
+#define RCC_AHBENR_GPIOCEN ((uint32_t)0x00080000) /*!< GPIOC clock enable */
+#define RCC_AHBENR_GPIODEN ((uint32_t)0x00100000) /*!< GPIOD clock enable */
+#define RCC_AHBENR_GPIOEEN ((uint32_t)0x00200000) /*!< GPIOE clock enable */
+#define RCC_AHBENR_GPIOFEN ((uint32_t)0x00400000) /*!< GPIOF clock enable */
+#define RCC_AHBENR_TSCEN ((uint32_t)0x01000000) /*!< TS controller clock enable */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_AHBENR_DMA1EN RCC_AHBENR_DMAEN /*!< DMA1 clock enable */
+#define RCC_AHBENR_TSEN RCC_AHBENR_TSCEN /*!< TS clock enable */
+
+/***************** Bit definition for RCC_APB2ENR register *****************/
+#define RCC_APB2ENR_SYSCFGCOMPEN ((uint32_t)0x00000001) /*!< SYSCFG and comparator clock enable */
+#define RCC_APB2ENR_ADCEN ((uint32_t)0x00000200) /*!< ADC1 clock enable */
+#define RCC_APB2ENR_USART8EN ((uint32_t)0x00000080) /*!< USART8 clock enable */
+#define RCC_APB2ENR_USART7EN ((uint32_t)0x00000040) /*!< USART7 clock enable */
+#define RCC_APB2ENR_USART6EN ((uint32_t)0x00000020) /*!< USART6 clock enable */
+#define RCC_APB2ENR_TIM1EN ((uint32_t)0x00000800) /*!< TIM1 clock enable */
+#define RCC_APB2ENR_SPI1EN ((uint32_t)0x00001000) /*!< SPI1 clock enable */
+#define RCC_APB2ENR_USART1EN ((uint32_t)0x00004000) /*!< USART1 clock enable */
+#define RCC_APB2ENR_TIM15EN ((uint32_t)0x00010000) /*!< TIM15 clock enable */
+#define RCC_APB2ENR_TIM16EN ((uint32_t)0x00020000) /*!< TIM16 clock enable */
+#define RCC_APB2ENR_TIM17EN ((uint32_t)0x00040000) /*!< TIM17 clock enable */
+#define RCC_APB2ENR_DBGMCUEN ((uint32_t)0x00400000) /*!< DBGMCU clock enable */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_APB2ENR_SYSCFGEN RCC_APB2ENR_SYSCFGCOMPEN /*!< SYSCFG clock enable */
+#define RCC_APB2ENR_ADC1EN RCC_APB2ENR_ADCEN /*!< ADC1 clock enable */
+
+/***************** Bit definition for RCC_APB1ENR register *****************/
+#define RCC_APB1ENR_TIM2EN ((uint32_t)0x00000001) /*!< Timer 2 clock enable */
+#define RCC_APB1ENR_TIM3EN ((uint32_t)0x00000002) /*!< Timer 3 clock enable */
+#define RCC_APB1ENR_TIM6EN ((uint32_t)0x00000010) /*!< Timer 6 clock enable */
+#define RCC_APB1ENR_TIM7EN ((uint32_t)0x00000020) /*!< Timer 7 clock enable */
+#define RCC_APB1ENR_TIM14EN ((uint32_t)0x00000100) /*!< Timer 14 clock enable */
+#define RCC_APB1ENR_WWDGEN ((uint32_t)0x00000800) /*!< Window Watchdog clock enable */
+#define RCC_APB1ENR_SPI2EN ((uint32_t)0x00004000) /*!< SPI2 clock enable */
+#define RCC_APB1ENR_USART2EN ((uint32_t)0x00020000) /*!< USART2 clock enable */
+#define RCC_APB1ENR_USART3EN ((uint32_t)0x00040000) /*!< USART3 clock enable */
+#define RCC_APB1ENR_USART4EN ((uint32_t)0x00080000) /*!< USART4 clock enable */
+#define RCC_APB1ENR_USART5EN ((uint32_t)0x00100000) /*!< USART5 clock enable */
+#define RCC_APB1ENR_I2C1EN ((uint32_t)0x00200000) /*!< I2C1 clock enable */
+#define RCC_APB1ENR_I2C2EN ((uint32_t)0x00400000) /*!< I2C2 clock enable */
+#define RCC_APB1ENR_CANEN ((uint32_t)0x02000000) /*!< CAN clock enable */
+#define RCC_APB1ENR_CRSEN ((uint32_t)0x08000000) /*!< CRS clock enable */
+#define RCC_APB1ENR_PWREN ((uint32_t)0x10000000) /*!< PWR clock enable */
+#define RCC_APB1ENR_DACEN ((uint32_t)0x20000000) /*!< DAC clock enable */
+#define RCC_APB1ENR_CECEN ((uint32_t)0x40000000) /*!< CEC clock enable */
+
+/******************* Bit definition for RCC_BDCR register ******************/
+#define RCC_BDCR_LSEON ((uint32_t)0x00000001) /*!< External Low Speed oscillator enable */
+#define RCC_BDCR_LSERDY ((uint32_t)0x00000002) /*!< External Low Speed oscillator Ready */
+#define RCC_BDCR_LSEBYP ((uint32_t)0x00000004) /*!< External Low Speed oscillator Bypass */
+
+#define RCC_BDCR_LSEDRV ((uint32_t)0x00000018) /*!< LSEDRV[1:0] bits (LSE Osc. drive capability) */
+#define RCC_BDCR_LSEDRV_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define RCC_BDCR_LSEDRV_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+
+#define RCC_BDCR_RTCSEL ((uint32_t)0x00000300) /*!< RTCSEL[1:0] bits (RTC clock source selection) */
+#define RCC_BDCR_RTCSEL_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define RCC_BDCR_RTCSEL_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+
+/*!< RTC configuration */
+#define RCC_BDCR_RTCSEL_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
+#define RCC_BDCR_RTCSEL_LSE ((uint32_t)0x00000100) /*!< LSE oscillator clock used as RTC clock */
+#define RCC_BDCR_RTCSEL_LSI ((uint32_t)0x00000200) /*!< LSI oscillator clock used as RTC clock */
+#define RCC_BDCR_RTCSEL_HSE ((uint32_t)0x00000300) /*!< HSE oscillator clock divided by 128 used as RTC clock */
+
+#define RCC_BDCR_RTCEN ((uint32_t)0x00008000) /*!< RTC clock enable */
+#define RCC_BDCR_BDRST ((uint32_t)0x00010000) /*!< Backup domain software reset */
+
+/******************* Bit definition for RCC_CSR register *******************/
+#define RCC_CSR_LSION ((uint32_t)0x00000001) /*!< Internal Low Speed oscillator enable */
+#define RCC_CSR_LSIRDY ((uint32_t)0x00000002) /*!< Internal Low Speed oscillator Ready */
+#define RCC_CSR_V18PWRRSTF ((uint32_t)0x00800000) /*!< V1.8 power domain reset flag */
+#define RCC_CSR_RMVF ((uint32_t)0x01000000) /*!< Remove reset flag */
+#define RCC_CSR_OBLRSTF ((uint32_t)0x02000000) /*!< OBL reset flag */
+#define RCC_CSR_PINRSTF ((uint32_t)0x04000000) /*!< PIN reset flag */
+#define RCC_CSR_PORRSTF ((uint32_t)0x08000000) /*!< POR/PDR reset flag */
+#define RCC_CSR_SFTRSTF ((uint32_t)0x10000000) /*!< Software Reset flag */
+#define RCC_CSR_IWDGRSTF ((uint32_t)0x20000000) /*!< Independent Watchdog reset flag */
+#define RCC_CSR_WWDGRSTF ((uint32_t)0x40000000) /*!< Window watchdog reset flag */
+#define RCC_CSR_LPWRRSTF ((uint32_t)0x80000000) /*!< Low-Power reset flag */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_CSR_OBL RCC_CSR_OBLRSTF /*!< OBL reset flag */
+
+/******************* Bit definition for RCC_AHBRSTR register ***************/
+#define RCC_AHBRSTR_GPIOARST ((uint32_t)0x00020000) /*!< GPIOA clock reset */
+#define RCC_AHBRSTR_GPIOBRST ((uint32_t)0x00040000) /*!< GPIOB clock reset */
+#define RCC_AHBRSTR_GPIOCRST ((uint32_t)0x00080000) /*!< GPIOC clock reset */
+#define RCC_AHBRSTR_GPIODRST ((uint32_t)0x00100000) /*!< GPIOD clock reset */
+#define RCC_AHBRSTR_GPIOERST ((uint32_t)0x00200000) /*!< GPIOE clock reset */
+#define RCC_AHBRSTR_GPIOFRST ((uint32_t)0x00400000) /*!< GPIOF clock reset */
+#define RCC_AHBRSTR_TSCRST ((uint32_t)0x01000000) /*!< TS clock reset */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_AHBRSTR_TSRST RCC_AHBRSTR_TSCRST /*!< TS clock reset */
+
+/******************* Bit definition for RCC_CFGR2 register *****************/
+/*!< PREDIV configuration */
+#define RCC_CFGR2_PREDIV ((uint32_t)0x0000000F) /*!< PREDIV[3:0] bits */
+#define RCC_CFGR2_PREDIV_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR2_PREDIV_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define RCC_CFGR2_PREDIV_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define RCC_CFGR2_PREDIV_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+
+#define RCC_CFGR2_PREDIV_DIV1 ((uint32_t)0x00000000) /*!< PREDIV input clock not divided */
+#define RCC_CFGR2_PREDIV_DIV2 ((uint32_t)0x00000001) /*!< PREDIV input clock divided by 2 */
+#define RCC_CFGR2_PREDIV_DIV3 ((uint32_t)0x00000002) /*!< PREDIV input clock divided by 3 */
+#define RCC_CFGR2_PREDIV_DIV4 ((uint32_t)0x00000003) /*!< PREDIV input clock divided by 4 */
+#define RCC_CFGR2_PREDIV_DIV5 ((uint32_t)0x00000004) /*!< PREDIV input clock divided by 5 */
+#define RCC_CFGR2_PREDIV_DIV6 ((uint32_t)0x00000005) /*!< PREDIV input clock divided by 6 */
+#define RCC_CFGR2_PREDIV_DIV7 ((uint32_t)0x00000006) /*!< PREDIV input clock divided by 7 */
+#define RCC_CFGR2_PREDIV_DIV8 ((uint32_t)0x00000007) /*!< PREDIV input clock divided by 8 */
+#define RCC_CFGR2_PREDIV_DIV9 ((uint32_t)0x00000008) /*!< PREDIV input clock divided by 9 */
+#define RCC_CFGR2_PREDIV_DIV10 ((uint32_t)0x00000009) /*!< PREDIV input clock divided by 10 */
+#define RCC_CFGR2_PREDIV_DIV11 ((uint32_t)0x0000000A) /*!< PREDIV input clock divided by 11 */
+#define RCC_CFGR2_PREDIV_DIV12 ((uint32_t)0x0000000B) /*!< PREDIV input clock divided by 12 */
+#define RCC_CFGR2_PREDIV_DIV13 ((uint32_t)0x0000000C) /*!< PREDIV input clock divided by 13 */
+#define RCC_CFGR2_PREDIV_DIV14 ((uint32_t)0x0000000D) /*!< PREDIV input clock divided by 14 */
+#define RCC_CFGR2_PREDIV_DIV15 ((uint32_t)0x0000000E) /*!< PREDIV input clock divided by 15 */
+#define RCC_CFGR2_PREDIV_DIV16 ((uint32_t)0x0000000F) /*!< PREDIV input clock divided by 16 */
+
+/******************* Bit definition for RCC_CFGR3 register *****************/
+/*!< USART1 Clock source selection */
+#define RCC_CFGR3_USART1SW ((uint32_t)0x00000003) /*!< USART1SW[1:0] bits */
+#define RCC_CFGR3_USART1SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR3_USART1SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+#define RCC_CFGR3_USART1SW_PCLK ((uint32_t)0x00000000) /*!< PCLK clock used as USART1 clock source */
+#define RCC_CFGR3_USART1SW_SYSCLK ((uint32_t)0x00000001) /*!< System clock selected as USART1 clock source */
+#define RCC_CFGR3_USART1SW_LSE ((uint32_t)0x00000002) /*!< LSE oscillator clock used as USART1 clock source */
+#define RCC_CFGR3_USART1SW_HSI ((uint32_t)0x00000003) /*!< HSI oscillator clock used as USART1 clock source */
+
+/*!< I2C1 Clock source selection */
+#define RCC_CFGR3_I2C1SW ((uint32_t)0x00000010) /*!< I2C1SW bits */
+
+#define RCC_CFGR3_I2C1SW_HSI ((uint32_t)0x00000000) /*!< HSI oscillator clock used as I2C1 clock source */
+#define RCC_CFGR3_I2C1SW_SYSCLK ((uint32_t)0x00000010) /*!< System clock selected as I2C1 clock source */
+
+/*!< CEC Clock source selection */
+#define RCC_CFGR3_CECSW ((uint32_t)0x00000040) /*!< CECSW bits */
+
+#define RCC_CFGR3_CECSW_HSI_DIV244 ((uint32_t)0x00000000) /*!< HSI clock divided by 244 selected as HDMI CEC entry clock source */
+#define RCC_CFGR3_CECSW_LSE ((uint32_t)0x00000040) /*!< LSE clock selected as HDMI CEC entry clock source */
+
+/*!< USART2 Clock source selection */
+#define RCC_CFGR3_USART2SW ((uint32_t)0x00030000) /*!< USART2SW[1:0] bits */
+#define RCC_CFGR3_USART2SW_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define RCC_CFGR3_USART2SW_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+
+#define RCC_CFGR3_USART2SW_PCLK ((uint32_t)0x00000000) /*!< PCLK clock used as USART2 clock source */
+#define RCC_CFGR3_USART2SW_SYSCLK ((uint32_t)0x00010000) /*!< System clock selected as USART2 clock source */
+#define RCC_CFGR3_USART2SW_LSE ((uint32_t)0x00020000) /*!< LSE oscillator clock used as USART2 clock source */
+#define RCC_CFGR3_USART2SW_HSI ((uint32_t)0x00030000) /*!< HSI oscillator clock used as USART2 clock source */
+
+/*!< USART3 Clock source selection */
+#define RCC_CFGR3_USART3SW ((uint32_t)0x000C0000) /*!< USART3SW[1:0] bits */
+#define RCC_CFGR3_USART3SW_0 ((uint32_t)0x00040000) /*!< Bit 0 */
+#define RCC_CFGR3_USART3SW_1 ((uint32_t)0x00080000) /*!< Bit 1 */
+
+#define RCC_CFGR3_USART3SW_PCLK ((uint32_t)0x00000000) /*!< PCLK clock used as USART3 clock source */
+#define RCC_CFGR3_USART3SW_SYSCLK ((uint32_t)0x00040000) /*!< System clock selected as USART3 clock source */
+#define RCC_CFGR3_USART3SW_LSE ((uint32_t)0x00080000) /*!< LSE oscillator clock used as USART3 clock source */
+#define RCC_CFGR3_USART3SW_HSI ((uint32_t)0x000C0000) /*!< HSI oscillator clock used as USART3 clock source */
+
+/******************* Bit definition for RCC_CR2 register *******************/
+#define RCC_CR2_HSI14ON ((uint32_t)0x00000001) /*!< Internal High Speed 14MHz clock enable */
+#define RCC_CR2_HSI14RDY ((uint32_t)0x00000002) /*!< Internal High Speed 14MHz clock ready flag */
+#define RCC_CR2_HSI14DIS ((uint32_t)0x00000004) /*!< Internal High Speed 14MHz clock disable */
+#define RCC_CR2_HSI14TRIM ((uint32_t)0x000000F8) /*!< Internal High Speed 14MHz clock trimming */
+#define RCC_CR2_HSI14CAL ((uint32_t)0x0000FF00) /*!< Internal High Speed 14MHz clock Calibration */
+#define RCC_CR2_HSI48ON ((uint32_t)0x00010000) /*!< Internal High Speed 48MHz clock enable */
+#define RCC_CR2_HSI48RDY ((uint32_t)0x00020000) /*!< Internal High Speed 48MHz clock ready flag */
+#define RCC_CR2_HSI48CAL ((uint32_t)0xFF000000) /*!< Internal High Speed 48MHz clock Calibration */
+
+/*****************************************************************************/
+/* */
+/* Real-Time Clock (RTC) */
+/* */
+/*****************************************************************************/
+/******************** Bits definition for RTC_TR register ******************/
+#define RTC_TR_PM ((uint32_t)0x00400000)
+#define RTC_TR_HT ((uint32_t)0x00300000)
+#define RTC_TR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TR_HU ((uint32_t)0x000F0000)
+#define RTC_TR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TR_MNT ((uint32_t)0x00007000)
+#define RTC_TR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TR_MNU ((uint32_t)0x00000F00)
+#define RTC_TR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TR_ST ((uint32_t)0x00000070)
+#define RTC_TR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TR_SU ((uint32_t)0x0000000F)
+#define RTC_TR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_DR register ******************/
+#define RTC_DR_YT ((uint32_t)0x00F00000)
+#define RTC_DR_YT_0 ((uint32_t)0x00100000)
+#define RTC_DR_YT_1 ((uint32_t)0x00200000)
+#define RTC_DR_YT_2 ((uint32_t)0x00400000)
+#define RTC_DR_YT_3 ((uint32_t)0x00800000)
+#define RTC_DR_YU ((uint32_t)0x000F0000)
+#define RTC_DR_YU_0 ((uint32_t)0x00010000)
+#define RTC_DR_YU_1 ((uint32_t)0x00020000)
+#define RTC_DR_YU_2 ((uint32_t)0x00040000)
+#define RTC_DR_YU_3 ((uint32_t)0x00080000)
+#define RTC_DR_WDU ((uint32_t)0x0000E000)
+#define RTC_DR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_DR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_DR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_DR_MT ((uint32_t)0x00001000)
+#define RTC_DR_MU ((uint32_t)0x00000F00)
+#define RTC_DR_MU_0 ((uint32_t)0x00000100)
+#define RTC_DR_MU_1 ((uint32_t)0x00000200)
+#define RTC_DR_MU_2 ((uint32_t)0x00000400)
+#define RTC_DR_MU_3 ((uint32_t)0x00000800)
+#define RTC_DR_DT ((uint32_t)0x00000030)
+#define RTC_DR_DT_0 ((uint32_t)0x00000010)
+#define RTC_DR_DT_1 ((uint32_t)0x00000020)
+#define RTC_DR_DU ((uint32_t)0x0000000F)
+#define RTC_DR_DU_0 ((uint32_t)0x00000001)
+#define RTC_DR_DU_1 ((uint32_t)0x00000002)
+#define RTC_DR_DU_2 ((uint32_t)0x00000004)
+#define RTC_DR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_CR register ******************/
+#define RTC_CR_COE ((uint32_t)0x00800000)
+#define RTC_CR_OSEL ((uint32_t)0x00600000)
+#define RTC_CR_OSEL_0 ((uint32_t)0x00200000)
+#define RTC_CR_OSEL_1 ((uint32_t)0x00400000)
+#define RTC_CR_POL ((uint32_t)0x00100000)
+#define RTC_CR_COSEL ((uint32_t)0x00080000)
+#define RTC_CR_BCK ((uint32_t)0x00040000)
+#define RTC_CR_SUB1H ((uint32_t)0x00020000)
+#define RTC_CR_ADD1H ((uint32_t)0x00010000)
+#define RTC_CR_TSIE ((uint32_t)0x00008000)
+#define RTC_CR_ALRAIE ((uint32_t)0x00001000)
+#define RTC_CR_TSE ((uint32_t)0x00000800)
+#define RTC_CR_WUTE ((uint32_t)0x00000400)
+#define RTC_CR_ALRAE ((uint32_t)0x00000100)
+#define RTC_CR_FMT ((uint32_t)0x00000040)
+#define RTC_CR_BYPSHAD ((uint32_t)0x00000020)
+#define RTC_CR_REFCKON ((uint32_t)0x00000010)
+#define RTC_CR_TSEDGE ((uint32_t)0x00000008)
+#define RTC_CR_WUCKSEL ((uint32_t)0x00000007)
+#define RTC_CR_WUCKSEL_0 ((uint32_t)0x00000001)
+#define RTC_CR_WUCKSEL_1 ((uint32_t)0x00000002)
+#define RTC_CR_WUCKSEL_2 ((uint32_t)0x00000004)
+
+/******************** Bits definition for RTC_ISR register *****************/
+#define RTC_ISR_RECALPF ((uint32_t)0x00010000)
+#define RTC_ISR_TAMP3F ((uint32_t)0x00008000)
+#define RTC_ISR_TAMP2F ((uint32_t)0x00004000)
+#define RTC_ISR_TAMP1F ((uint32_t)0x00002000)
+#define RTC_ISR_TSOVF ((uint32_t)0x00001000)
+#define RTC_ISR_TSF ((uint32_t)0x00000800)
+#define RTC_ISR_WUTF ((uint32_t)0x00000400)
+#define RTC_ISR_ALRAF ((uint32_t)0x00000100)
+#define RTC_ISR_INIT ((uint32_t)0x00000080)
+#define RTC_ISR_INITF ((uint32_t)0x00000040)
+#define RTC_ISR_RSF ((uint32_t)0x00000020)
+#define RTC_ISR_INITS ((uint32_t)0x00000010)
+#define RTC_ISR_SHPF ((uint32_t)0x00000008)
+#define RTC_ISR_WUTWF ((uint32_t)0x00000004)
+#define RTC_ISR_ALRAWF ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_PRER register ****************/
+#define RTC_PRER_PREDIV_A ((uint32_t)0x007F0000)
+#define RTC_PRER_PREDIV_S ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_WUTR register ****************/
+#define RTC_WUTR_WUT ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_ALRMAR register **************/
+#define RTC_ALRMAR_MSK4 ((uint32_t)0x80000000)
+#define RTC_ALRMAR_WDSEL ((uint32_t)0x40000000)
+#define RTC_ALRMAR_DT ((uint32_t)0x30000000)
+#define RTC_ALRMAR_DT_0 ((uint32_t)0x10000000)
+#define RTC_ALRMAR_DT_1 ((uint32_t)0x20000000)
+#define RTC_ALRMAR_DU ((uint32_t)0x0F000000)
+#define RTC_ALRMAR_DU_0 ((uint32_t)0x01000000)
+#define RTC_ALRMAR_DU_1 ((uint32_t)0x02000000)
+#define RTC_ALRMAR_DU_2 ((uint32_t)0x04000000)
+#define RTC_ALRMAR_DU_3 ((uint32_t)0x08000000)
+#define RTC_ALRMAR_MSK3 ((uint32_t)0x00800000)
+#define RTC_ALRMAR_PM ((uint32_t)0x00400000)
+#define RTC_ALRMAR_HT ((uint32_t)0x00300000)
+#define RTC_ALRMAR_HT_0 ((uint32_t)0x00100000)
+#define RTC_ALRMAR_HT_1 ((uint32_t)0x00200000)
+#define RTC_ALRMAR_HU ((uint32_t)0x000F0000)
+#define RTC_ALRMAR_HU_0 ((uint32_t)0x00010000)
+#define RTC_ALRMAR_HU_1 ((uint32_t)0x00020000)
+#define RTC_ALRMAR_HU_2 ((uint32_t)0x00040000)
+#define RTC_ALRMAR_HU_3 ((uint32_t)0x00080000)
+#define RTC_ALRMAR_MSK2 ((uint32_t)0x00008000)
+#define RTC_ALRMAR_MNT ((uint32_t)0x00007000)
+#define RTC_ALRMAR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_ALRMAR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_ALRMAR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_ALRMAR_MNU ((uint32_t)0x00000F00)
+#define RTC_ALRMAR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_ALRMAR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_ALRMAR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_ALRMAR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_ALRMAR_MSK1 ((uint32_t)0x00000080)
+#define RTC_ALRMAR_ST ((uint32_t)0x00000070)
+#define RTC_ALRMAR_ST_0 ((uint32_t)0x00000010)
+#define RTC_ALRMAR_ST_1 ((uint32_t)0x00000020)
+#define RTC_ALRMAR_ST_2 ((uint32_t)0x00000040)
+#define RTC_ALRMAR_SU ((uint32_t)0x0000000F)
+#define RTC_ALRMAR_SU_0 ((uint32_t)0x00000001)
+#define RTC_ALRMAR_SU_1 ((uint32_t)0x00000002)
+#define RTC_ALRMAR_SU_2 ((uint32_t)0x00000004)
+#define RTC_ALRMAR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_WPR register *****************/
+#define RTC_WPR_KEY ((uint32_t)0x000000FF)
+
+/******************** Bits definition for RTC_SSR register *****************/
+#define RTC_SSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_SHIFTR register **************/
+#define RTC_SHIFTR_SUBFS ((uint32_t)0x00007FFF)
+#define RTC_SHIFTR_ADD1S ((uint32_t)0x80000000)
+
+/******************** Bits definition for RTC_TSTR register ****************/
+#define RTC_TSTR_PM ((uint32_t)0x00400000)
+#define RTC_TSTR_HT ((uint32_t)0x00300000)
+#define RTC_TSTR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TSTR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TSTR_HU ((uint32_t)0x000F0000)
+#define RTC_TSTR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TSTR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TSTR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TSTR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TSTR_MNT ((uint32_t)0x00007000)
+#define RTC_TSTR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TSTR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TSTR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TSTR_MNU ((uint32_t)0x00000F00)
+#define RTC_TSTR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TSTR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TSTR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TSTR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TSTR_ST ((uint32_t)0x00000070)
+#define RTC_TSTR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TSTR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TSTR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TSTR_SU ((uint32_t)0x0000000F)
+#define RTC_TSTR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TSTR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TSTR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TSTR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSDR register ****************/
+#define RTC_TSDR_WDU ((uint32_t)0x0000E000)
+#define RTC_TSDR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_TSDR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_TSDR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_TSDR_MT ((uint32_t)0x00001000)
+#define RTC_TSDR_MU ((uint32_t)0x00000F00)
+#define RTC_TSDR_MU_0 ((uint32_t)0x00000100)
+#define RTC_TSDR_MU_1 ((uint32_t)0x00000200)
+#define RTC_TSDR_MU_2 ((uint32_t)0x00000400)
+#define RTC_TSDR_MU_3 ((uint32_t)0x00000800)
+#define RTC_TSDR_DT ((uint32_t)0x00000030)
+#define RTC_TSDR_DT_0 ((uint32_t)0x00000010)
+#define RTC_TSDR_DT_1 ((uint32_t)0x00000020)
+#define RTC_TSDR_DU ((uint32_t)0x0000000F)
+#define RTC_TSDR_DU_0 ((uint32_t)0x00000001)
+#define RTC_TSDR_DU_1 ((uint32_t)0x00000002)
+#define RTC_TSDR_DU_2 ((uint32_t)0x00000004)
+#define RTC_TSDR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSSSR register ***************/
+#define RTC_TSSSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_CALR register ****************/
+#define RTC_CALR_CALP ((uint32_t)0x00008000)
+#define RTC_CALR_CALW8 ((uint32_t)0x00004000)
+#define RTC_CALR_CALW16 ((uint32_t)0x00002000)
+#define RTC_CALR_CALM ((uint32_t)0x000001FF)
+#define RTC_CALR_CALM_0 ((uint32_t)0x00000001)
+#define RTC_CALR_CALM_1 ((uint32_t)0x00000002)
+#define RTC_CALR_CALM_2 ((uint32_t)0x00000004)
+#define RTC_CALR_CALM_3 ((uint32_t)0x00000008)
+#define RTC_CALR_CALM_4 ((uint32_t)0x00000010)
+#define RTC_CALR_CALM_5 ((uint32_t)0x00000020)
+#define RTC_CALR_CALM_6 ((uint32_t)0x00000040)
+#define RTC_CALR_CALM_7 ((uint32_t)0x00000080)
+#define RTC_CALR_CALM_8 ((uint32_t)0x00000100)
+
+/******************** Bits definition for RTC_TAFCR register ***************/
+#define RTC_TAFCR_ALARMOUTTYPE ((uint32_t)0x00040000)
+#define RTC_TAFCR_TAMPPUDIS ((uint32_t)0x00008000)
+#define RTC_TAFCR_TAMPPRCH ((uint32_t)0x00006000)
+#define RTC_TAFCR_TAMPPRCH_0 ((uint32_t)0x00002000)
+#define RTC_TAFCR_TAMPPRCH_1 ((uint32_t)0x00004000)
+#define RTC_TAFCR_TAMPFLT ((uint32_t)0x00001800)
+#define RTC_TAFCR_TAMPFLT_0 ((uint32_t)0x00000800)
+#define RTC_TAFCR_TAMPFLT_1 ((uint32_t)0x00001000)
+#define RTC_TAFCR_TAMPFREQ ((uint32_t)0x00000700)
+#define RTC_TAFCR_TAMPFREQ_0 ((uint32_t)0x00000100)
+#define RTC_TAFCR_TAMPFREQ_1 ((uint32_t)0x00000200)
+#define RTC_TAFCR_TAMPFREQ_2 ((uint32_t)0x00000400)
+#define RTC_TAFCR_TAMPTS ((uint32_t)0x00000080)
+#define RTC_TAFCR_TAMP3TRG ((uint32_t)0x00000040)
+#define RTC_TAFCR_TAMP3E ((uint32_t)0x00000020)
+#define RTC_TAFCR_TAMP2TRG ((uint32_t)0x00000010)
+#define RTC_TAFCR_TAMP2E ((uint32_t)0x00000008)
+#define RTC_TAFCR_TAMPIE ((uint32_t)0x00000004)
+#define RTC_TAFCR_TAMP1TRG ((uint32_t)0x00000002)
+#define RTC_TAFCR_TAMP1E ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_ALRMASSR register ************/
+#define RTC_ALRMASSR_MASKSS ((uint32_t)0x0F000000)
+#define RTC_ALRMASSR_MASKSS_0 ((uint32_t)0x01000000)
+#define RTC_ALRMASSR_MASKSS_1 ((uint32_t)0x02000000)
+#define RTC_ALRMASSR_MASKSS_2 ((uint32_t)0x04000000)
+#define RTC_ALRMASSR_MASKSS_3 ((uint32_t)0x08000000)
+#define RTC_ALRMASSR_SS ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_BKP0R register ***************/
+#define RTC_BKP0R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP1R register ***************/
+#define RTC_BKP1R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP2R register ***************/
+#define RTC_BKP2R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP3R register ***************/
+#define RTC_BKP3R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP4R register ***************/
+#define RTC_BKP4R ((uint32_t)0xFFFFFFFF)
+
+/******************** Number of backup registers ******************************/
+#define RTC_BKP_NUMBER ((uint32_t)0x00000005)
+
+/*****************************************************************************/
+/* */
+/* Serial Peripheral Interface (SPI) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for SPI_CR1 register *******************/
+#define SPI_CR1_CPHA ((uint32_t)0x00000001) /*!< Clock Phase */
+#define SPI_CR1_CPOL ((uint32_t)0x00000002) /*!< Clock Polarity */
+#define SPI_CR1_MSTR ((uint32_t)0x00000004) /*!< Master Selection */
+#define SPI_CR1_BR ((uint32_t)0x00000038) /*!< BR[2:0] bits (Baud Rate Control) */
+#define SPI_CR1_BR_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define SPI_CR1_BR_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define SPI_CR1_BR_2 ((uint32_t)0x00000020) /*!< Bit 2 */
+#define SPI_CR1_SPE ((uint32_t)0x00000040) /*!< SPI Enable */
+#define SPI_CR1_LSBFIRST ((uint32_t)0x00000080) /*!< Frame Format */
+#define SPI_CR1_SSI ((uint32_t)0x00000100) /*!< Internal slave select */
+#define SPI_CR1_SSM ((uint32_t)0x00000200) /*!< Software slave management */
+#define SPI_CR1_RXONLY ((uint32_t)0x00000400) /*!< Receive only */
+#define SPI_CR1_CRCL ((uint32_t)0x00000800) /*!< CRC Length */
+#define SPI_CR1_CRCNEXT ((uint32_t)0x00001000) /*!< Transmit CRC next */
+#define SPI_CR1_CRCEN ((uint32_t)0x00002000) /*!< Hardware CRC calculation enable */
+#define SPI_CR1_BIDIOE ((uint32_t)0x00004000) /*!< Output enable in bidirectional mode */
+#define SPI_CR1_BIDIMODE ((uint32_t)0x00008000) /*!< Bidirectional data mode enable */
+
+/******************* Bit definition for SPI_CR2 register *******************/
+#define SPI_CR2_RXDMAEN ((uint32_t)0x00000001) /*!< Rx Buffer DMA Enable */
+#define SPI_CR2_TXDMAEN ((uint32_t)0x00000002) /*!< Tx Buffer DMA Enable */
+#define SPI_CR2_SSOE ((uint32_t)0x00000004) /*!< SS Output Enable */
+#define SPI_CR2_NSSP ((uint32_t)0x00000008) /*!< NSS pulse management Enable */
+#define SPI_CR2_FRF ((uint32_t)0x00000010) /*!< Frame Format Enable */
+#define SPI_CR2_ERRIE ((uint32_t)0x00000020) /*!< Error Interrupt Enable */
+#define SPI_CR2_RXNEIE ((uint32_t)0x00000040) /*!< RX buffer Not Empty Interrupt Enable */
+#define SPI_CR2_TXEIE ((uint32_t)0x00000080) /*!< Tx buffer Empty Interrupt Enable */
+#define SPI_CR2_DS ((uint32_t)0x00000F00) /*!< DS[3:0] Data Size */
+#define SPI_CR2_DS_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define SPI_CR2_DS_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define SPI_CR2_DS_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define SPI_CR2_DS_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+#define SPI_CR2_FRXTH ((uint32_t)0x00001000) /*!< FIFO reception Threshold */
+#define SPI_CR2_LDMARX ((uint32_t)0x00002000) /*!< Last DMA transfer for reception */
+#define SPI_CR2_LDMATX ((uint32_t)0x00004000) /*!< Last DMA transfer for transmission */
+
+/******************** Bit definition for SPI_SR register *******************/
+#define SPI_SR_RXNE ((uint32_t)0x00000001) /*!< Receive buffer Not Empty */
+#define SPI_SR_TXE ((uint32_t)0x00000002) /*!< Transmit buffer Empty */
+#define SPI_SR_CHSIDE ((uint32_t)0x00000004) /*!< Channel side */
+#define SPI_SR_UDR ((uint32_t)0x00000008) /*!< Underrun flag */
+#define SPI_SR_CRCERR ((uint32_t)0x00000010) /*!< CRC Error flag */
+#define SPI_SR_MODF ((uint32_t)0x00000020) /*!< Mode fault */
+#define SPI_SR_OVR ((uint32_t)0x00000040) /*!< Overrun flag */
+#define SPI_SR_BSY ((uint32_t)0x00000080) /*!< Busy flag */
+#define SPI_SR_FRE ((uint32_t)0x00000100) /*!< TI frame format error */
+#define SPI_SR_FRLVL ((uint32_t)0x00000600) /*!< FIFO Reception Level */
+#define SPI_SR_FRLVL_0 ((uint32_t)0x00000200) /*!< Bit 0 */
+#define SPI_SR_FRLVL_1 ((uint32_t)0x00000400) /*!< Bit 1 */
+#define SPI_SR_FTLVL ((uint32_t)0x00001800) /*!< FIFO Transmission Level */
+#define SPI_SR_FTLVL_0 ((uint32_t)0x00000800) /*!< Bit 0 */
+#define SPI_SR_FTLVL_1 ((uint32_t)0x00001000) /*!< Bit 1 */
+
+/******************** Bit definition for SPI_DR register *******************/
+#define SPI_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data Register */
+
+/******************* Bit definition for SPI_CRCPR register *****************/
+#define SPI_CRCPR_CRCPOLY ((uint32_t)0xFFFFFFFF) /*!< CRC polynomial register */
+
+/****************** Bit definition for SPI_RXCRCR register *****************/
+#define SPI_RXCRCR_RXCRC ((uint32_t)0xFFFFFFFF) /*!< Rx CRC Register */
+
+/****************** Bit definition for SPI_TXCRCR register *****************/
+#define SPI_TXCRCR_TXCRC ((uint32_t)0xFFFFFFFF) /*!< Tx CRC Register */
+
+/****************** Bit definition for SPI_I2SCFGR register ****************/
+#define SPI_I2SCFGR_CHLEN ((uint32_t)0x00000001) /*!<Channel length (number of bits per audio channel) */
+#define SPI_I2SCFGR_DATLEN ((uint32_t)0x00000006) /*!<DATLEN[1:0] bits (Data length to be transferred) */
+#define SPI_I2SCFGR_DATLEN_0 ((uint32_t)0x00000002) /*!<Bit 0 */
+#define SPI_I2SCFGR_DATLEN_1 ((uint32_t)0x00000004) /*!<Bit 1 */
+#define SPI_I2SCFGR_CKPOL ((uint32_t)0x00000008) /*!<steady state clock polarity */
+#define SPI_I2SCFGR_I2SSTD ((uint32_t)0x00000030) /*!<I2SSTD[1:0] bits (I2S standard selection) */
+#define SPI_I2SCFGR_I2SSTD_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SSTD_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define SPI_I2SCFGR_PCMSYNC ((uint32_t)0x00000080) /*!<PCM frame synchronization */
+#define SPI_I2SCFGR_I2SCFG ((uint32_t)0x00000300) /*!<I2SCFG[1:0] bits (I2S configuration mode) */
+#define SPI_I2SCFGR_I2SCFG_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SCFG_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define SPI_I2SCFGR_I2SE ((uint32_t)0x00000400) /*!<I2S Enable */
+#define SPI_I2SCFGR_I2SMOD ((uint32_t)0x00000800) /*!<I2S mode selection */
+
+/****************** Bit definition for SPI_I2SPR register ******************/
+#define SPI_I2SPR_I2SDIV ((uint32_t)0x000000FF) /*!<I2S Linear prescaler */
+#define SPI_I2SPR_ODD ((uint32_t)0x00000100) /*!<Odd factor for the prescaler */
+#define SPI_I2SPR_MCKOE ((uint32_t)0x00000200) /*!<Master Clock Output Enable */
+
+/*****************************************************************************/
+/* */
+/* System Configuration (SYSCFG) */
+/* */
+/*****************************************************************************/
+/***************** Bit definition for SYSCFG_CFGR1 register ****************/
+#define SYSCFG_CFGR1_MEM_MODE ((uint32_t)0x00000003) /*!< SYSCFG_Memory Remap Config */
+#define SYSCFG_CFGR1_MEM_MODE_0 ((uint32_t)0x00000001) /*!< SYSCFG_Memory Remap Config Bit 0 */
+#define SYSCFG_CFGR1_MEM_MODE_1 ((uint32_t)0x00000002) /*!< SYSCFG_Memory Remap Config Bit 1 */
+#define SYSCFG_CFGR1_IRDA_ENV_SEL ((uint32_t)0x000000C0) /*!< IRDA_SEL_ENV config */
+#define SYSCFG_CFGR1_IRDA_ENV_SEL_0 ((uint32_t)0x00000040) /*!< IRDA_SEL_ENV Bit 0 */
+#define SYSCFG_CFGR1_IRDA_ENV_SEL_1 ((uint32_t)0x00000080) /*!< IRDA_SEL_ENV Bit 1 */
+#define SYSCFG_CFGR1_I2C_FMP_PB6 ((uint32_t)0x00010000) /*!< I2C PB6 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB7 ((uint32_t)0x00020000) /*!< I2C PB7 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB8 ((uint32_t)0x00040000) /*!< I2C PB8 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB9 ((uint32_t)0x00080000) /*!< I2C PB9 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_I2C1 ((uint32_t)0x00100000) /*!< Enable Fast Mode Plus on PB10, PB11, PF6 and PF7 */
+#define SYSCFG_CFGR1_I2C_FMP_I2C2 ((uint32_t)0x00200000) /*!< Enable I2C2 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PA9 ((uint32_t)0x00400000) /*!< Enable Fast Mode Plus on PA9 */
+#define SYSCFG_CFGR1_I2C_FMP_PA10 ((uint32_t)0x00800000) /*!< Enable Fast Mode Plus on PA10 */
+
+/***************** Bit definition for SYSCFG_EXTICR1 register **************/
+#define SYSCFG_EXTICR1_EXTI0 ((uint16_t)0x000F) /*!< EXTI 0 configuration */
+#define SYSCFG_EXTICR1_EXTI1 ((uint16_t)0x00F0) /*!< EXTI 1 configuration */
+#define SYSCFG_EXTICR1_EXTI2 ((uint16_t)0x0F00) /*!< EXTI 2 configuration */
+#define SYSCFG_EXTICR1_EXTI3 ((uint16_t)0xF000) /*!< EXTI 3 configuration */
+
+/**
+ * @brief EXTI0 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI0_PA ((uint16_t)0x0000) /*!< PA[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PB ((uint16_t)0x0001) /*!< PB[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PC ((uint16_t)0x0002) /*!< PC[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PD ((uint16_t)0x0003) /*!< PD[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PE ((uint16_t)0x0004) /*!< PE[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PF ((uint16_t)0x0005) /*!< PF[0] pin */
+
+/**
+ * @brief EXTI1 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI1_PA ((uint16_t)0x0000) /*!< PA[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PB ((uint16_t)0x0010) /*!< PB[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PC ((uint16_t)0x0020) /*!< PC[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PD ((uint16_t)0x0030) /*!< PD[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PE ((uint16_t)0x0040) /*!< PE[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PF ((uint16_t)0x0050) /*!< PF[1] pin */
+
+/**
+ * @brief EXTI2 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI2_PA ((uint16_t)0x0000) /*!< PA[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PB ((uint16_t)0x0100) /*!< PB[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PC ((uint16_t)0x0200) /*!< PC[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PD ((uint16_t)0x0300) /*!< PD[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PE ((uint16_t)0x0400) /*!< PE[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PF ((uint16_t)0x0500) /*!< PF[2] pin */
+
+/**
+ * @brief EXTI3 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI3_PA ((uint16_t)0x0000) /*!< PA[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PB ((uint16_t)0x1000) /*!< PB[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PC ((uint16_t)0x2000) /*!< PC[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PD ((uint16_t)0x3000) /*!< PD[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PE ((uint16_t)0x4000) /*!< PE[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PF ((uint16_t)0x5000) /*!< PF[3] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR2 register **************/
+#define SYSCFG_EXTICR2_EXTI4 ((uint16_t)0x000F) /*!< EXTI 4 configuration */
+#define SYSCFG_EXTICR2_EXTI5 ((uint16_t)0x00F0) /*!< EXTI 5 configuration */
+#define SYSCFG_EXTICR2_EXTI6 ((uint16_t)0x0F00) /*!< EXTI 6 configuration */
+#define SYSCFG_EXTICR2_EXTI7 ((uint16_t)0xF000) /*!< EXTI 7 configuration */
+
+/**
+ * @brief EXTI4 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI4_PA ((uint16_t)0x0000) /*!< PA[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PB ((uint16_t)0x0001) /*!< PB[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PC ((uint16_t)0x0002) /*!< PC[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PD ((uint16_t)0x0003) /*!< PD[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PE ((uint16_t)0x0004) /*!< PE[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PF ((uint16_t)0x0005) /*!< PF[4] pin */
+
+/**
+ * @brief EXTI5 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI5_PA ((uint16_t)0x0000) /*!< PA[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PB ((uint16_t)0x0010) /*!< PB[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PC ((uint16_t)0x0020) /*!< PC[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PD ((uint16_t)0x0030) /*!< PD[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PE ((uint16_t)0x0040) /*!< PE[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PF ((uint16_t)0x0050) /*!< PF[5] pin */
+
+/**
+ * @brief EXTI6 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI6_PA ((uint16_t)0x0000) /*!< PA[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PB ((uint16_t)0x0100) /*!< PB[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PC ((uint16_t)0x0200) /*!< PC[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PD ((uint16_t)0x0300) /*!< PD[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PE ((uint16_t)0x0400) /*!< PE[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PF ((uint16_t)0x0500) /*!< PF[6] pin */
+
+/**
+ * @brief EXTI7 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI7_PA ((uint16_t)0x0000) /*!< PA[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PB ((uint16_t)0x1000) /*!< PB[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PC ((uint16_t)0x2000) /*!< PC[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PD ((uint16_t)0x3000) /*!< PD[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PE ((uint16_t)0x4000) /*!< PE[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PF ((uint16_t)0x5000) /*!< PF[7] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR3 register **************/
+#define SYSCFG_EXTICR3_EXTI8 ((uint16_t)0x000F) /*!< EXTI 8 configuration */
+#define SYSCFG_EXTICR3_EXTI9 ((uint16_t)0x00F0) /*!< EXTI 9 configuration */
+#define SYSCFG_EXTICR3_EXTI10 ((uint16_t)0x0F00) /*!< EXTI 10 configuration */
+#define SYSCFG_EXTICR3_EXTI11 ((uint16_t)0xF000) /*!< EXTI 11 configuration */
+
+/**
+ * @brief EXTI8 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI8_PA ((uint16_t)0x0000) /*!< PA[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PB ((uint16_t)0x0001) /*!< PB[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PC ((uint16_t)0x0002) /*!< PC[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PD ((uint16_t)0x0003) /*!< PD[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PE ((uint16_t)0x0004) /*!< PE[8] pin */
+
+/**
+ * @brief EXTI9 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI9_PA ((uint16_t)0x0000) /*!< PA[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PB ((uint16_t)0x0010) /*!< PB[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PC ((uint16_t)0x0020) /*!< PC[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PD ((uint16_t)0x0030) /*!< PD[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PE ((uint16_t)0x0040) /*!< PE[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PF ((uint16_t)0x0050) /*!< PF[9] pin */
+
+/**
+ * @brief EXTI10 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI10_PA ((uint16_t)0x0000) /*!< PA[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PB ((uint16_t)0x0100) /*!< PB[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PC ((uint16_t)0x0200) /*!< PC[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PD ((uint16_t)0x0300) /*!< PE[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PE ((uint16_t)0x0400) /*!< PD[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PF ((uint16_t)0x0500) /*!< PF[10] pin */
+
+/**
+ * @brief EXTI11 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI11_PA ((uint16_t)0x0000) /*!< PA[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PB ((uint16_t)0x1000) /*!< PB[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PC ((uint16_t)0x2000) /*!< PC[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PD ((uint16_t)0x3000) /*!< PD[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PE ((uint16_t)0x4000) /*!< PE[11] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR4 register **************/
+#define SYSCFG_EXTICR4_EXTI12 ((uint16_t)0x000F) /*!< EXTI 12 configuration */
+#define SYSCFG_EXTICR4_EXTI13 ((uint16_t)0x00F0) /*!< EXTI 13 configuration */
+#define SYSCFG_EXTICR4_EXTI14 ((uint16_t)0x0F00) /*!< EXTI 14 configuration */
+#define SYSCFG_EXTICR4_EXTI15 ((uint16_t)0xF000) /*!< EXTI 15 configuration */
+
+/**
+ * @brief EXTI12 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI12_PA ((uint16_t)0x0000) /*!< PA[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PB ((uint16_t)0x0001) /*!< PB[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PC ((uint16_t)0x0002) /*!< PC[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PD ((uint16_t)0x0003) /*!< PD[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PE ((uint16_t)0x0004) /*!< PE[12] pin */
+
+/**
+ * @brief EXTI13 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI13_PA ((uint16_t)0x0000) /*!< PA[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PB ((uint16_t)0x0010) /*!< PB[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PC ((uint16_t)0x0020) /*!< PC[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PD ((uint16_t)0x0030) /*!< PD[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PE ((uint16_t)0x0040) /*!< PE[13] pin */
+
+/**
+ * @brief EXTI14 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI14_PA ((uint16_t)0x0000) /*!< PA[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PB ((uint16_t)0x0100) /*!< PB[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PC ((uint16_t)0x0200) /*!< PC[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PD ((uint16_t)0x0300) /*!< PD[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PE ((uint16_t)0x0400) /*!< PE[14] pin */
+
+/**
+ * @brief EXTI15 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI15_PA ((uint16_t)0x0000) /*!< PA[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PB ((uint16_t)0x1000) /*!< PB[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PC ((uint16_t)0x2000) /*!< PC[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PD ((uint16_t)0x3000) /*!< PD[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PE ((uint16_t)0x4000) /*!< PE[15] pin */
+
+/***************** Bit definition for SYSCFG_CFGR2 register ****************/
+#define SYSCFG_CFGR2_LOCKUP_LOCK ((uint32_t)0x00000001) /*!< Enables and locks the LOCKUP (Hardfault) output of CortexM0 with Break Input of TIMER1 */
+#define SYSCFG_CFGR2_SRAM_PARITY_LOCK ((uint32_t)0x00000002) /*!< Enables and locks the SRAM_PARITY error signal with Break Input of TIMER1 */
+#define SYSCFG_CFGR2_PVD_LOCK ((uint32_t)0x00000004) /*!< Enables and locks the PVD connection with Timer1 Break Input and also the PVD_EN and PVDSEL[2:0] bits of the Power Control Interface */
+#define SYSCFG_CFGR2_SRAM_PEF ((uint32_t)0x00000100) /*!< SRAM Parity error flag */
+#define SYSCFG_CFGR2_SRAM_PE SYSCFG_CFGR2_SRAM_PEF /*!< SRAM Parity error flag (define maintained for legacy purpose) */
+
+/***************** Bit definition for SYSCFG_xxx ISR Wrapper register ****************/
+#define SYSCFG_ITLINE0_SR_EWDG ((uint32_t)0x00000001) /*!< EWDG interrupt */
+#define SYSCFG_ITLINE1_SR_PVDOUT ((uint32_t)0x00000001) /*!< Power voltage detection -> exti[31] Interrupt */
+#define SYSCFG_ITLINE1_SR_VDDIO2 ((uint32_t)0x00000002) /*!< VDDIO2 -> exti[16] Interrupt */
+#define SYSCFG_ITLINE2_SR_RTC_WAKEUP ((uint32_t)0x00000001) /*!< RTC WAKEUP -> exti[20] Interrupt */
+#define SYSCFG_ITLINE2_SR_RTC_TSTAMP ((uint32_t)0x00000002) /*!< RTC Time Stamp -> exti[19] interrupt */
+#define SYSCFG_ITLINE2_SR_RTC_ALRA ((uint32_t)0x00000003) /*!< RTC Alarm -> exti[17] interrupt .... */
+#define SYSCFG_ITLINE3_SR_FLASH_ITF ((uint32_t)0x00000001) /*!< Flash ITF Interrupt */
+#define SYSCFG_ITLINE4_SR_CRS ((uint32_t)0x00000001) /*!< CRS interrupt */
+#define SYSCFG_ITLINE4_SR_CLK_CTRL ((uint32_t)0x00000002) /*!< CLK CTRL interrupt */
+#define SYSCFG_ITLINE5_SR_EXTI0 ((uint32_t)0x00000001) /*!< External Interrupt 0 */
+#define SYSCFG_ITLINE5_SR_EXTI1 ((uint32_t)0x00000002) /*!< External Interrupt 1 */
+#define SYSCFG_ITLINE6_SR_EXTI2 ((uint32_t)0x00000001) /*!< External Interrupt 2 */
+#define SYSCFG_ITLINE6_SR_EXTI3 ((uint32_t)0x00000002) /*!< External Interrupt 3 */
+#define SYSCFG_ITLINE7_SR_EXTI4 ((uint32_t)0x00000001) /*!< External Interrupt 15 to 4 */
+#define SYSCFG_ITLINE7_SR_EXTI5 ((uint32_t)0x00000002) /*!< External Interrupt 15 to 4 */
+#define SYSCFG_ITLINE7_SR_EXTI6 ((uint32_t)0x00000004) /*!< External Interrupt 15 to 4 */
+#define SYSCFG_ITLINE7_SR_EXTI7 ((uint32_t)0x00000008) /*!< External Interrupt 15 to 4 */
+#define SYSCFG_ITLINE7_SR_EXTI8 ((uint32_t)0x00000010) /*!< External Interrupt 15 to 4 */
+#define SYSCFG_ITLINE7_SR_EXTI9 ((uint32_t)0x00000020) /*!< External Interrupt 15 to 4 */
+#define SYSCFG_ITLINE7_SR_EXTI10 ((uint32_t)0x00000040) /*!< External Interrupt 15 to 4 */
+#define SYSCFG_ITLINE7_SR_EXTI11 ((uint32_t)0x00000080) /*!< External Interrupt 15 to 4 */
+#define SYSCFG_ITLINE7_SR_EXTI12 ((uint32_t)0x00000100) /*!< External Interrupt 15 to 4 */
+#define SYSCFG_ITLINE7_SR_EXTI13 ((uint32_t)0x00000200) /*!< External Interrupt 15 to 4 */
+#define SYSCFG_ITLINE7_SR_EXTI14 ((uint32_t)0x00000400) /*!< External Interrupt 15 to 4 */
+#define SYSCFG_ITLINE7_SR_EXTI15 ((uint32_t)0x00000800) /*!< External Interrupt 15 to 4 */
+#define SYSCFG_ITLINE8_SR_TSC_EOA ((uint32_t)0x00000001) /*!< Touch control EOA Interrupt */
+#define SYSCFG_ITLINE8_SR_TSC_MCE ((uint32_t)0x00000002) /*!< Touch control MCE Interrupt */
+#define SYSCFG_ITLINE9_SR_DMA1_CH1 ((uint32_t)0x00000001) /*!< DMA1 Channel 1 Interrupt */
+#define SYSCFG_ITLINE10_SR_DMA1_CH2 ((uint32_t)0x00000001) /*!< DMA1 Channel 2 Interrupt */
+#define SYSCFG_ITLINE10_SR_DMA1_CH3 ((uint32_t)0x00000002) /*!< DMA2 Channel 3 Interrupt */
+#define SYSCFG_ITLINE10_SR_DMA2_CH1 ((uint32_t)0x00000004) /*!< DMA2 Channel 1 Interrupt */
+#define SYSCFG_ITLINE10_SR_DMA2_CH2 ((uint32_t)0x00000008) /*!< DMA2 Channel 2 Interrupt */
+#define SYSCFG_ITLINE11_SR_DMA1_CH4 ((uint32_t)0x00000001) /*!< DMA1 Channel 4 Interrupt */
+#define SYSCFG_ITLINE11_SR_DMA1_CH5 ((uint32_t)0x00000002) /*!< DMA1 Channel 5 Interrupt */
+#define SYSCFG_ITLINE11_SR_DMA1_CH6 ((uint32_t)0x00000004) /*!< DMA1 Channel 6 Interrupt */
+#define SYSCFG_ITLINE11_SR_DMA1_CH7 ((uint32_t)0x00000008) /*!< DMA1 Channel 7 Interrupt */
+#define SYSCFG_ITLINE11_SR_DMA2_CH3 ((uint32_t)0x00000010) /*!< DMA2 Channel 3 Interrupt */
+#define SYSCFG_ITLINE11_SR_DMA2_CH4 ((uint32_t)0x00000020) /*!< DMA2 Channel 4 Interrupt */
+#define SYSCFG_ITLINE11_SR_DMA2_CH5 ((uint32_t)0x00000040) /*!< DMA2 Channel 5 Interrupt */
+#define SYSCFG_ITLINE12_SR_ADC ((uint32_t)0x00000001) /*!< ADC Interrupt */
+#define SYSCFG_ITLINE12_SR_COMP1 ((uint32_t)0x00000002) /*!< COMP1 Interrupt -> exti[21] */
+#define SYSCFG_ITLINE12_SR_COMP2 ((uint32_t)0x00000004) /*!< COMP2 Interrupt -> exti[22] */
+#define SYSCFG_ITLINE13_SR_TIM1_BRK ((uint32_t)0x00000001) /*!< TIM1 BRK Interrupt */
+#define SYSCFG_ITLINE13_SR_TIM1_UPD ((uint32_t)0x00000002) /*!< TIM1 UPD Interrupt */
+#define SYSCFG_ITLINE13_SR_TIM1_TRG ((uint32_t)0x00000004) /*!< TIM1 TRG Interrupt */
+#define SYSCFG_ITLINE13_SR_TIM1_CCU ((uint32_t)0x00000008) /*!< TIM1 CCU Interrupt */
+#define SYSCFG_ITLINE14_SR_TIM1_CC ((uint32_t)0x00000001) /*!< TIM1 CC Interrupt */
+#define SYSCFG_ITLINE15_SR_TIM2_GLB ((uint32_t)0x00000001) /*!< TIM2 GLB Interrupt */
+#define SYSCFG_ITLINE16_SR_TIM3_GLB ((uint32_t)0x00000001) /*!< TIM3 GLB Interrupt */
+#define SYSCFG_ITLINE17_SR_DAC ((uint32_t)0x00000001) /*!< DAC Interrupt */
+#define SYSCFG_ITLINE17_SR_TIM6_GLB ((uint32_t)0x00000002) /*!< TIM6 GLB Interrupt */
+#define SYSCFG_ITLINE18_SR_TIM7_GLB ((uint32_t)0x00000001) /*!< TIM7 GLB Interrupt */
+#define SYSCFG_ITLINE19_SR_TIM14_GLB ((uint32_t)0x00000001) /*!< TIM14 GLB Interrupt */
+#define SYSCFG_ITLINE20_SR_TIM15_GLB ((uint32_t)0x00000001) /*!< TIM15 GLB Interrupt */
+#define SYSCFG_ITLINE21_SR_TIM16_GLB ((uint32_t)0x00000001) /*!< TIM16 GLB Interrupt */
+#define SYSCFG_ITLINE22_SR_TIM17_GLB ((uint32_t)0x00000001) /*!< TIM17 GLB Interrupt */
+#define SYSCFG_ITLINE23_SR_I2C1_GLB ((uint32_t)0x00000001) /*!< I2C1 GLB Interrupt -> exti[23] */
+#define SYSCFG_ITLINE24_SR_I2C2_GLB ((uint32_t)0x00000001) /*!< I2C2 GLB Interrupt */
+#define SYSCFG_ITLINE25_SR_SPI1 ((uint32_t)0x00000001) /*!< SPI1 Interrupt */
+#define SYSCFG_ITLINE26_SR_SPI2 ((uint32_t)0x00000001) /*!< SPI2 Interrupt */
+#define SYSCFG_ITLINE27_SR_USART1_GLB ((uint32_t)0x00000001) /*!< USART1 GLB Interrupt -> exti[25] */
+#define SYSCFG_ITLINE28_SR_USART2_GLB ((uint32_t)0x00000001) /*!< USART2 GLB Interrupt -> exti[26] */
+#define SYSCFG_ITLINE29_SR_USART3_GLB ((uint32_t)0x00000001) /*!< USART3 GLB Interrupt -> exti[28] */
+#define SYSCFG_ITLINE29_SR_USART4_GLB ((uint32_t)0x00000002) /*!< USART4 GLB Interrupt */
+#define SYSCFG_ITLINE29_SR_USART5_GLB ((uint32_t)0x00000004) /*!< USART5 GLB Interrupt */
+#define SYSCFG_ITLINE29_SR_USART6_GLB ((uint32_t)0x00000008) /*!< USART6 GLB Interrupt */
+#define SYSCFG_ITLINE29_SR_USART7_GLB ((uint32_t)0x00000010) /*!< USART7 GLB Interrupt */
+#define SYSCFG_ITLINE29_SR_USART8_GLB ((uint32_t)0x00000020) /*!< USART8 GLB Interrupt */
+#define SYSCFG_ITLINE30_SR_CAN ((uint32_t)0x00000001) /*!< CAN Interrupt */
+#define SYSCFG_ITLINE30_SR_CEC ((uint32_t)0x00000002) /*!< CEC Interrupt */
+
+/*****************************************************************************/
+/* */
+/* Timers (TIM) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for TIM_CR1 register *******************/
+#define TIM_CR1_CEN ((uint32_t)0x00000001) /*!<Counter enable */
+#define TIM_CR1_UDIS ((uint32_t)0x00000002) /*!<Update disable */
+#define TIM_CR1_URS ((uint32_t)0x00000004) /*!<Update request source */
+#define TIM_CR1_OPM ((uint32_t)0x00000008) /*!<One pulse mode */
+#define TIM_CR1_DIR ((uint32_t)0x00000010) /*!<Direction */
+
+#define TIM_CR1_CMS ((uint32_t)0x00000060) /*!<CMS[1:0] bits (Center-aligned mode selection) */
+#define TIM_CR1_CMS_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define TIM_CR1_CMS_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+
+#define TIM_CR1_ARPE ((uint32_t)0x00000080) /*!<Auto-reload preload enable */
+
+#define TIM_CR1_CKD ((uint32_t)0x00000300) /*!<CKD[1:0] bits (clock division) */
+#define TIM_CR1_CKD_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CR1_CKD_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+/******************* Bit definition for TIM_CR2 register *******************/
+#define TIM_CR2_CCPC ((uint32_t)0x00000001) /*!<Capture/Compare Preloaded Control */
+#define TIM_CR2_CCUS ((uint32_t)0x00000004) /*!<Capture/Compare Control Update Selection */
+#define TIM_CR2_CCDS ((uint32_t)0x00000008) /*!<Capture/Compare DMA Selection */
+
+#define TIM_CR2_MMS ((uint32_t)0x00000070) /*!<MMS[2:0] bits (Master Mode Selection) */
+#define TIM_CR2_MMS_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CR2_MMS_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CR2_MMS_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CR2_TI1S ((uint32_t)0x00000080) /*!<TI1 Selection */
+#define TIM_CR2_OIS1 ((uint32_t)0x00000100) /*!<Output Idle state 1 (OC1 output) */
+#define TIM_CR2_OIS1N ((uint32_t)0x00000200) /*!<Output Idle state 1 (OC1N output) */
+#define TIM_CR2_OIS2 ((uint32_t)0x00000400) /*!<Output Idle state 2 (OC2 output) */
+#define TIM_CR2_OIS2N ((uint32_t)0x00000800) /*!<Output Idle state 2 (OC2N output) */
+#define TIM_CR2_OIS3 ((uint32_t)0x00001000) /*!<Output Idle state 3 (OC3 output) */
+#define TIM_CR2_OIS3N ((uint32_t)0x00002000) /*!<Output Idle state 3 (OC3N output) */
+#define TIM_CR2_OIS4 ((uint32_t)0x00004000) /*!<Output Idle state 4 (OC4 output) */
+
+/******************* Bit definition for TIM_SMCR register ******************/
+#define TIM_SMCR_SMS ((uint32_t)0x00000007) /*!<SMS[2:0] bits (Slave mode selection) */
+#define TIM_SMCR_SMS_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_SMCR_SMS_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_SMCR_SMS_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+
+#define TIM_SMCR_OCCS ((uint32_t)0x00000008) /*!< OCREF clear selection */
+
+#define TIM_SMCR_TS ((uint32_t)0x00000070) /*!<TS[2:0] bits (Trigger selection) */
+#define TIM_SMCR_TS_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_SMCR_TS_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_SMCR_TS_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_SMCR_MSM ((uint32_t)0x00000080) /*!<Master/slave mode */
+
+#define TIM_SMCR_ETF ((uint32_t)0x00000F00) /*!<ETF[3:0] bits (External trigger filter) */
+#define TIM_SMCR_ETF_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_SMCR_ETF_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define TIM_SMCR_ETF_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define TIM_SMCR_ETF_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+
+#define TIM_SMCR_ETPS ((uint32_t)0x00003000) /*!<ETPS[1:0] bits (External trigger prescaler) */
+#define TIM_SMCR_ETPS_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_SMCR_ETPS_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+
+#define TIM_SMCR_ECE ((uint32_t)0x00004000) /*!<External clock enable */
+#define TIM_SMCR_ETP ((uint32_t)0x00008000) /*!<External trigger polarity */
+
+/******************* Bit definition for TIM_DIER register ******************/
+#define TIM_DIER_UIE ((uint32_t)0x00000001) /*!<Update interrupt enable */
+#define TIM_DIER_CC1IE ((uint32_t)0x00000002) /*!<Capture/Compare 1 interrupt enable */
+#define TIM_DIER_CC2IE ((uint32_t)0x00000004) /*!<Capture/Compare 2 interrupt enable */
+#define TIM_DIER_CC3IE ((uint32_t)0x00000008) /*!<Capture/Compare 3 interrupt enable */
+#define TIM_DIER_CC4IE ((uint32_t)0x00000010) /*!<Capture/Compare 4 interrupt enable */
+#define TIM_DIER_COMIE ((uint32_t)0x00000020) /*!<COM interrupt enable */
+#define TIM_DIER_TIE ((uint32_t)0x00000040) /*!<Trigger interrupt enable */
+#define TIM_DIER_BIE ((uint32_t)0x00000080) /*!<Break interrupt enable */
+#define TIM_DIER_UDE ((uint32_t)0x00000100) /*!<Update DMA request enable */
+#define TIM_DIER_CC1DE ((uint32_t)0x00000200) /*!<Capture/Compare 1 DMA request enable */
+#define TIM_DIER_CC2DE ((uint32_t)0x00000400) /*!<Capture/Compare 2 DMA request enable */
+#define TIM_DIER_CC3DE ((uint32_t)0x00000800) /*!<Capture/Compare 3 DMA request enable */
+#define TIM_DIER_CC4DE ((uint32_t)0x00001000) /*!<Capture/Compare 4 DMA request enable */
+#define TIM_DIER_COMDE ((uint32_t)0x00002000) /*!<COM DMA request enable */
+#define TIM_DIER_TDE ((uint32_t)0x00004000) /*!<Trigger DMA request enable */
+
+/******************** Bit definition for TIM_SR register *******************/
+#define TIM_SR_UIF ((uint32_t)0x00000001) /*!<Update interrupt Flag */
+#define TIM_SR_CC1IF ((uint32_t)0x00000002) /*!<Capture/Compare 1 interrupt Flag */
+#define TIM_SR_CC2IF ((uint32_t)0x00000004) /*!<Capture/Compare 2 interrupt Flag */
+#define TIM_SR_CC3IF ((uint32_t)0x00000008) /*!<Capture/Compare 3 interrupt Flag */
+#define TIM_SR_CC4IF ((uint32_t)0x00000010) /*!<Capture/Compare 4 interrupt Flag */
+#define TIM_SR_COMIF ((uint32_t)0x00000020) /*!<COM interrupt Flag */
+#define TIM_SR_TIF ((uint32_t)0x00000040) /*!<Trigger interrupt Flag */
+#define TIM_SR_BIF ((uint32_t)0x00000080) /*!<Break interrupt Flag */
+#define TIM_SR_CC1OF ((uint32_t)0x00000200) /*!<Capture/Compare 1 Overcapture Flag */
+#define TIM_SR_CC2OF ((uint32_t)0x00000400) /*!<Capture/Compare 2 Overcapture Flag */
+#define TIM_SR_CC3OF ((uint32_t)0x00000800) /*!<Capture/Compare 3 Overcapture Flag */
+#define TIM_SR_CC4OF ((uint32_t)0x00001000) /*!<Capture/Compare 4 Overcapture Flag */
+
+/******************* Bit definition for TIM_EGR register *******************/
+#define TIM_EGR_UG ((uint32_t)0x00000001) /*!<Update Generation */
+#define TIM_EGR_CC1G ((uint32_t)0x00000002) /*!<Capture/Compare 1 Generation */
+#define TIM_EGR_CC2G ((uint32_t)0x00000004) /*!<Capture/Compare 2 Generation */
+#define TIM_EGR_CC3G ((uint32_t)0x00000008) /*!<Capture/Compare 3 Generation */
+#define TIM_EGR_CC4G ((uint32_t)0x00000010) /*!<Capture/Compare 4 Generation */
+#define TIM_EGR_COMG ((uint32_t)0x00000020) /*!<Capture/Compare Control Update Generation */
+#define TIM_EGR_TG ((uint32_t)0x00000040) /*!<Trigger Generation */
+#define TIM_EGR_BG ((uint32_t)0x00000080) /*!<Break Generation */
+
+/****************** Bit definition for TIM_CCMR1 register ******************/
+#define TIM_CCMR1_CC1S ((uint32_t)0x00000003) /*!<CC1S[1:0] bits (Capture/Compare 1 Selection) */
+#define TIM_CCMR1_CC1S_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_CCMR1_CC1S_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC1FE ((uint32_t)0x00000004) /*!<Output Compare 1 Fast enable */
+#define TIM_CCMR1_OC1PE ((uint32_t)0x00000008) /*!<Output Compare 1 Preload enable */
+
+#define TIM_CCMR1_OC1M ((uint32_t)0x00000070) /*!<OC1M[2:0] bits (Output Compare 1 Mode) */
+#define TIM_CCMR1_OC1M_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR1_OC1M_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR1_OC1M_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CCMR1_OC1CE ((uint32_t)0x00000080) /*!<Output Compare 1Clear Enable */
+
+#define TIM_CCMR1_CC2S ((uint32_t)0x00000300) /*!<CC2S[1:0] bits (Capture/Compare 2 Selection) */
+#define TIM_CCMR1_CC2S_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CCMR1_CC2S_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC2FE ((uint32_t)0x00000400) /*!<Output Compare 2 Fast enable */
+#define TIM_CCMR1_OC2PE ((uint32_t)0x00000800) /*!<Output Compare 2 Preload enable */
+
+#define TIM_CCMR1_OC2M ((uint32_t)0x00007000) /*!<OC2M[2:0] bits (Output Compare 2 Mode) */
+#define TIM_CCMR1_OC2M_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR1_OC2M_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR1_OC2M_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+
+#define TIM_CCMR1_OC2CE ((uint32_t)0x00008000) /*!<Output Compare 2 Clear Enable */
+
+/*---------------------------------------------------------------------------*/
+
+#define TIM_CCMR1_IC1PSC ((uint32_t)0x0000000C) /*!<IC1PSC[1:0] bits (Input Capture 1 Prescaler) */
+#define TIM_CCMR1_IC1PSC_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define TIM_CCMR1_IC1PSC_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC1F ((uint32_t)0x000000F0) /*!<IC1F[3:0] bits (Input Capture 1 Filter) */
+#define TIM_CCMR1_IC1F_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR1_IC1F_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR1_IC1F_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define TIM_CCMR1_IC1F_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define TIM_CCMR1_IC2PSC ((uint32_t)0x00000C00) /*!<IC2PSC[1:0] bits (Input Capture 2 Prescaler) */
+#define TIM_CCMR1_IC2PSC_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define TIM_CCMR1_IC2PSC_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC2F ((uint32_t)0x0000F000) /*!<IC2F[3:0] bits (Input Capture 2 Filter) */
+#define TIM_CCMR1_IC2F_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR1_IC2F_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR1_IC2F_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define TIM_CCMR1_IC2F_3 ((uint32_t)0x00008000) /*!<Bit 3 */
+
+/****************** Bit definition for TIM_CCMR2 register ******************/
+#define TIM_CCMR2_CC3S ((uint32_t)0x00000003) /*!<CC3S[1:0] bits (Capture/Compare 3 Selection) */
+#define TIM_CCMR2_CC3S_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_CCMR2_CC3S_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC3FE ((uint32_t)0x00000004) /*!<Output Compare 3 Fast enable */
+#define TIM_CCMR2_OC3PE ((uint32_t)0x00000008) /*!<Output Compare 3 Preload enable */
+
+#define TIM_CCMR2_OC3M ((uint32_t)0x00000070) /*!<OC3M[2:0] bits (Output Compare 3 Mode) */
+#define TIM_CCMR2_OC3M_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR2_OC3M_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR2_OC3M_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CCMR2_OC3CE ((uint32_t)0x00000080) /*!<Output Compare 3 Clear Enable */
+
+#define TIM_CCMR2_CC4S ((uint32_t)0x00000300) /*!<CC4S[1:0] bits (Capture/Compare 4 Selection) */
+#define TIM_CCMR2_CC4S_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CCMR2_CC4S_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC4FE ((uint32_t)0x00000400) /*!<Output Compare 4 Fast enable */
+#define TIM_CCMR2_OC4PE ((uint32_t)0x00000800) /*!<Output Compare 4 Preload enable */
+
+#define TIM_CCMR2_OC4M ((uint32_t)0x00007000) /*!<OC4M[2:0] bits (Output Compare 4 Mode) */
+#define TIM_CCMR2_OC4M_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR2_OC4M_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR2_OC4M_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+
+#define TIM_CCMR2_OC4CE ((uint32_t)0x00008000) /*!<Output Compare 4 Clear Enable */
+
+/*---------------------------------------------------------------------------*/
+
+#define TIM_CCMR2_IC3PSC ((uint32_t)0x0000000C) /*!<IC3PSC[1:0] bits (Input Capture 3 Prescaler) */
+#define TIM_CCMR2_IC3PSC_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define TIM_CCMR2_IC3PSC_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC3F ((uint32_t)0x000000F0) /*!<IC3F[3:0] bits (Input Capture 3 Filter) */
+#define TIM_CCMR2_IC3F_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR2_IC3F_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR2_IC3F_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define TIM_CCMR2_IC3F_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define TIM_CCMR2_IC4PSC ((uint32_t)0x00000C00) /*!<IC4PSC[1:0] bits (Input Capture 4 Prescaler) */
+#define TIM_CCMR2_IC4PSC_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define TIM_CCMR2_IC4PSC_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC4F ((uint32_t)0x0000F000) /*!<IC4F[3:0] bits (Input Capture 4 Filter) */
+#define TIM_CCMR2_IC4F_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR2_IC4F_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR2_IC4F_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define TIM_CCMR2_IC4F_3 ((uint32_t)0x00008000) /*!<Bit 3 */
+
+/******************* Bit definition for TIM_CCER register ******************/
+#define TIM_CCER_CC1E ((uint32_t)0x00000001) /*!<Capture/Compare 1 output enable */
+#define TIM_CCER_CC1P ((uint32_t)0x00000002) /*!<Capture/Compare 1 output Polarity */
+#define TIM_CCER_CC1NE ((uint32_t)0x00000004) /*!<Capture/Compare 1 Complementary output enable */
+#define TIM_CCER_CC1NP ((uint32_t)0x00000008) /*!<Capture/Compare 1 Complementary output Polarity */
+#define TIM_CCER_CC2E ((uint32_t)0x00000010) /*!<Capture/Compare 2 output enable */
+#define TIM_CCER_CC2P ((uint32_t)0x00000020) /*!<Capture/Compare 2 output Polarity */
+#define TIM_CCER_CC2NE ((uint32_t)0x00000040) /*!<Capture/Compare 2 Complementary output enable */
+#define TIM_CCER_CC2NP ((uint32_t)0x00000080) /*!<Capture/Compare 2 Complementary output Polarity */
+#define TIM_CCER_CC3E ((uint32_t)0x00000100) /*!<Capture/Compare 3 output enable */
+#define TIM_CCER_CC3P ((uint32_t)0x00000200) /*!<Capture/Compare 3 output Polarity */
+#define TIM_CCER_CC3NE ((uint32_t)0x00000400) /*!<Capture/Compare 3 Complementary output enable */
+#define TIM_CCER_CC3NP ((uint32_t)0x00000800) /*!<Capture/Compare 3 Complementary output Polarity */
+#define TIM_CCER_CC4E ((uint32_t)0x00001000) /*!<Capture/Compare 4 output enable */
+#define TIM_CCER_CC4P ((uint32_t)0x00002000) /*!<Capture/Compare 4 output Polarity */
+#define TIM_CCER_CC4NP ((uint32_t)0x00008000) /*!<Capture/Compare 4 Complementary output Polarity */
+
+/******************* Bit definition for TIM_CNT register *******************/
+#define TIM_CNT_CNT ((uint32_t)0xFFFFFFFF) /*!<Counter Value */
+
+/******************* Bit definition for TIM_PSC register *******************/
+#define TIM_PSC_PSC ((uint32_t)0x0000FFFF) /*!<Prescaler Value */
+
+/******************* Bit definition for TIM_ARR register *******************/
+#define TIM_ARR_ARR ((uint32_t)0xFFFFFFFF) /*!<actual auto-reload Value */
+
+/******************* Bit definition for TIM_RCR register *******************/
+#define TIM_RCR_REP ((uint32_t)0x000000FF) /*!<Repetition Counter Value */
+
+/******************* Bit definition for TIM_CCR1 register ******************/
+#define TIM_CCR1_CCR1 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 1 Value */
+
+/******************* Bit definition for TIM_CCR2 register ******************/
+#define TIM_CCR2_CCR2 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 2 Value */
+
+/******************* Bit definition for TIM_CCR3 register ******************/
+#define TIM_CCR3_CCR3 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 3 Value */
+
+/******************* Bit definition for TIM_CCR4 register ******************/
+#define TIM_CCR4_CCR4 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 4 Value */
+
+/******************* Bit definition for TIM_BDTR register ******************/
+#define TIM_BDTR_DTG ((uint32_t)0x000000FF) /*!<DTG[0:7] bits (Dead-Time Generator set-up) */
+#define TIM_BDTR_DTG_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_BDTR_DTG_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_BDTR_DTG_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define TIM_BDTR_DTG_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define TIM_BDTR_DTG_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define TIM_BDTR_DTG_5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define TIM_BDTR_DTG_6 ((uint32_t)0x00000040) /*!<Bit 6 */
+#define TIM_BDTR_DTG_7 ((uint32_t)0x00000080) /*!<Bit 7 */
+
+#define TIM_BDTR_LOCK ((uint32_t)0x00000300) /*!<LOCK[1:0] bits (Lock Configuration) */
+#define TIM_BDTR_LOCK_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_BDTR_LOCK_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_BDTR_OSSI ((uint32_t)0x00000400) /*!<Off-State Selection for Idle mode */
+#define TIM_BDTR_OSSR ((uint32_t)0x00000800) /*!<Off-State Selection for Run mode */
+#define TIM_BDTR_BKE ((uint32_t)0x00001000) /*!<Break enable */
+#define TIM_BDTR_BKP ((uint32_t)0x00002000) /*!<Break Polarity */
+#define TIM_BDTR_AOE ((uint32_t)0x00004000) /*!<Automatic Output enable */
+#define TIM_BDTR_MOE ((uint32_t)0x00008000) /*!<Main Output enable */
+
+/******************* Bit definition for TIM_DCR register *******************/
+#define TIM_DCR_DBA ((uint32_t)0x0000001F) /*!<DBA[4:0] bits (DMA Base Address) */
+#define TIM_DCR_DBA_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_DCR_DBA_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_DCR_DBA_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define TIM_DCR_DBA_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define TIM_DCR_DBA_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+
+#define TIM_DCR_DBL ((uint32_t)0x00001F00) /*!<DBL[4:0] bits (DMA Burst Length) */
+#define TIM_DCR_DBL_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_DCR_DBL_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define TIM_DCR_DBL_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define TIM_DCR_DBL_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define TIM_DCR_DBL_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+
+/******************* Bit definition for TIM_DMAR register ******************/
+#define TIM_DMAR_DMAB ((uint32_t)0x0000FFFF) /*!<DMA register for burst accesses */
+
+/******************* Bit definition for TIM14_OR register ********************/
+#define TIM14_OR_TI1_RMP ((uint32_t)0x00000003) /*!<TI1_RMP[1:0] bits (TIM14 Input 4 remap) */
+#define TIM14_OR_TI1_RMP_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM14_OR_TI1_RMP_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+/******************************************************************************/
+/* */
+/* Touch Sensing Controller (TSC) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for TSC_CR register *********************/
+#define TSC_CR_TSCE ((uint32_t)0x00000001) /*!<Touch sensing controller enable */
+#define TSC_CR_START ((uint32_t)0x00000002) /*!<Start acquisition */
+#define TSC_CR_AM ((uint32_t)0x00000004) /*!<Acquisition mode */
+#define TSC_CR_SYNCPOL ((uint32_t)0x00000008) /*!<Synchronization pin polarity */
+#define TSC_CR_IODEF ((uint32_t)0x00000010) /*!<IO default mode */
+
+#define TSC_CR_MCV ((uint32_t)0x000000E0) /*!<MCV[2:0] bits (Max Count Value) */
+#define TSC_CR_MCV_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define TSC_CR_MCV_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+#define TSC_CR_MCV_2 ((uint32_t)0x00000080) /*!<Bit 2 */
+
+#define TSC_CR_PGPSC ((uint32_t)0x00007000) /*!<PGPSC[2:0] bits (Pulse Generator Prescaler) */
+#define TSC_CR_PGPSC_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TSC_CR_PGPSC_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TSC_CR_PGPSC_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+
+#define TSC_CR_SSPSC ((uint32_t)0x00008000) /*!<Spread Spectrum Prescaler */
+#define TSC_CR_SSE ((uint32_t)0x00010000) /*!<Spread Spectrum Enable */
+
+#define TSC_CR_SSD ((uint32_t)0x00FE0000) /*!<SSD[6:0] bits (Spread Spectrum Deviation) */
+#define TSC_CR_SSD_0 ((uint32_t)0x00020000) /*!<Bit 0 */
+#define TSC_CR_SSD_1 ((uint32_t)0x00040000) /*!<Bit 1 */
+#define TSC_CR_SSD_2 ((uint32_t)0x00080000) /*!<Bit 2 */
+#define TSC_CR_SSD_3 ((uint32_t)0x00100000) /*!<Bit 3 */
+#define TSC_CR_SSD_4 ((uint32_t)0x00200000) /*!<Bit 4 */
+#define TSC_CR_SSD_5 ((uint32_t)0x00400000) /*!<Bit 5 */
+#define TSC_CR_SSD_6 ((uint32_t)0x00800000) /*!<Bit 6 */
+
+#define TSC_CR_CTPL ((uint32_t)0x0F000000) /*!<CTPL[3:0] bits (Charge Transfer pulse low) */
+#define TSC_CR_CTPL_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define TSC_CR_CTPL_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define TSC_CR_CTPL_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define TSC_CR_CTPL_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+
+#define TSC_CR_CTPH ((uint32_t)0xF0000000) /*!<CTPH[3:0] bits (Charge Transfer pulse high) */
+#define TSC_CR_CTPH_0 ((uint32_t)0x10000000) /*!<Bit 0 */
+#define TSC_CR_CTPH_1 ((uint32_t)0x20000000) /*!<Bit 1 */
+#define TSC_CR_CTPH_2 ((uint32_t)0x40000000) /*!<Bit 2 */
+#define TSC_CR_CTPH_3 ((uint32_t)0x80000000) /*!<Bit 3 */
+
+/******************* Bit definition for TSC_IER register ********************/
+#define TSC_IER_EOAIE ((uint32_t)0x00000001) /*!<End of acquisition interrupt enable */
+#define TSC_IER_MCEIE ((uint32_t)0x00000002) /*!<Max count error interrupt enable */
+
+/******************* Bit definition for TSC_ICR register ********************/
+#define TSC_ICR_EOAIC ((uint32_t)0x00000001) /*!<End of acquisition interrupt clear */
+#define TSC_ICR_MCEIC ((uint32_t)0x00000002) /*!<Max count error interrupt clear */
+
+/******************* Bit definition for TSC_ISR register ********************/
+#define TSC_ISR_EOAF ((uint32_t)0x00000001) /*!<End of acquisition flag */
+#define TSC_ISR_MCEF ((uint32_t)0x00000002) /*!<Max count error flag */
+
+/******************* Bit definition for TSC_IOHCR register ******************/
+#define TSC_IOHCR_G1_IO1 ((uint32_t)0x00000001) /*!<GROUP1_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G1_IO2 ((uint32_t)0x00000002) /*!<GROUP1_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G1_IO3 ((uint32_t)0x00000004) /*!<GROUP1_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G1_IO4 ((uint32_t)0x00000008) /*!<GROUP1_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G2_IO1 ((uint32_t)0x00000010) /*!<GROUP2_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G2_IO2 ((uint32_t)0x00000020) /*!<GROUP2_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G2_IO3 ((uint32_t)0x00000040) /*!<GROUP2_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G2_IO4 ((uint32_t)0x00000080) /*!<GROUP2_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G3_IO1 ((uint32_t)0x00000100) /*!<GROUP3_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G3_IO2 ((uint32_t)0x00000200) /*!<GROUP3_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G3_IO3 ((uint32_t)0x00000400) /*!<GROUP3_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G3_IO4 ((uint32_t)0x00000800) /*!<GROUP3_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G4_IO1 ((uint32_t)0x00001000) /*!<GROUP4_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G4_IO2 ((uint32_t)0x00002000) /*!<GROUP4_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G4_IO3 ((uint32_t)0x00004000) /*!<GROUP4_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G4_IO4 ((uint32_t)0x00008000) /*!<GROUP4_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G5_IO1 ((uint32_t)0x00010000) /*!<GROUP5_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G5_IO2 ((uint32_t)0x00020000) /*!<GROUP5_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G5_IO3 ((uint32_t)0x00040000) /*!<GROUP5_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G5_IO4 ((uint32_t)0x00080000) /*!<GROUP5_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G6_IO1 ((uint32_t)0x00100000) /*!<GROUP6_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G6_IO2 ((uint32_t)0x00200000) /*!<GROUP6_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G6_IO3 ((uint32_t)0x00400000) /*!<GROUP6_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G6_IO4 ((uint32_t)0x00800000) /*!<GROUP6_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G7_IO1 ((uint32_t)0x01000000) /*!<GROUP7_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G7_IO2 ((uint32_t)0x02000000) /*!<GROUP7_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G7_IO3 ((uint32_t)0x04000000) /*!<GROUP7_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G7_IO4 ((uint32_t)0x08000000) /*!<GROUP7_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G8_IO1 ((uint32_t)0x10000000) /*!<GROUP8_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G8_IO2 ((uint32_t)0x20000000) /*!<GROUP8_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G8_IO3 ((uint32_t)0x40000000) /*!<GROUP8_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G8_IO4 ((uint32_t)0x80000000) /*!<GROUP8_IO4 schmitt trigger hysteresis mode */
+
+/******************* Bit definition for TSC_IOASCR register *****************/
+#define TSC_IOASCR_G1_IO1 ((uint32_t)0x00000001) /*!<GROUP1_IO1 analog switch enable */
+#define TSC_IOASCR_G1_IO2 ((uint32_t)0x00000002) /*!<GROUP1_IO2 analog switch enable */
+#define TSC_IOASCR_G1_IO3 ((uint32_t)0x00000004) /*!<GROUP1_IO3 analog switch enable */
+#define TSC_IOASCR_G1_IO4 ((uint32_t)0x00000008) /*!<GROUP1_IO4 analog switch enable */
+#define TSC_IOASCR_G2_IO1 ((uint32_t)0x00000010) /*!<GROUP2_IO1 analog switch enable */
+#define TSC_IOASCR_G2_IO2 ((uint32_t)0x00000020) /*!<GROUP2_IO2 analog switch enable */
+#define TSC_IOASCR_G2_IO3 ((uint32_t)0x00000040) /*!<GROUP2_IO3 analog switch enable */
+#define TSC_IOASCR_G2_IO4 ((uint32_t)0x00000080) /*!<GROUP2_IO4 analog switch enable */
+#define TSC_IOASCR_G3_IO1 ((uint32_t)0x00000100) /*!<GROUP3_IO1 analog switch enable */
+#define TSC_IOASCR_G3_IO2 ((uint32_t)0x00000200) /*!<GROUP3_IO2 analog switch enable */
+#define TSC_IOASCR_G3_IO3 ((uint32_t)0x00000400) /*!<GROUP3_IO3 analog switch enable */
+#define TSC_IOASCR_G3_IO4 ((uint32_t)0x00000800) /*!<GROUP3_IO4 analog switch enable */
+#define TSC_IOASCR_G4_IO1 ((uint32_t)0x00001000) /*!<GROUP4_IO1 analog switch enable */
+#define TSC_IOASCR_G4_IO2 ((uint32_t)0x00002000) /*!<GROUP4_IO2 analog switch enable */
+#define TSC_IOASCR_G4_IO3 ((uint32_t)0x00004000) /*!<GROUP4_IO3 analog switch enable */
+#define TSC_IOASCR_G4_IO4 ((uint32_t)0x00008000) /*!<GROUP4_IO4 analog switch enable */
+#define TSC_IOASCR_G5_IO1 ((uint32_t)0x00010000) /*!<GROUP5_IO1 analog switch enable */
+#define TSC_IOASCR_G5_IO2 ((uint32_t)0x00020000) /*!<GROUP5_IO2 analog switch enable */
+#define TSC_IOASCR_G5_IO3 ((uint32_t)0x00040000) /*!<GROUP5_IO3 analog switch enable */
+#define TSC_IOASCR_G5_IO4 ((uint32_t)0x00080000) /*!<GROUP5_IO4 analog switch enable */
+#define TSC_IOASCR_G6_IO1 ((uint32_t)0x00100000) /*!<GROUP6_IO1 analog switch enable */
+#define TSC_IOASCR_G6_IO2 ((uint32_t)0x00200000) /*!<GROUP6_IO2 analog switch enable */
+#define TSC_IOASCR_G6_IO3 ((uint32_t)0x00400000) /*!<GROUP6_IO3 analog switch enable */
+#define TSC_IOASCR_G6_IO4 ((uint32_t)0x00800000) /*!<GROUP6_IO4 analog switch enable */
+#define TSC_IOASCR_G7_IO1 ((uint32_t)0x01000000) /*!<GROUP7_IO1 analog switch enable */
+#define TSC_IOASCR_G7_IO2 ((uint32_t)0x02000000) /*!<GROUP7_IO2 analog switch enable */
+#define TSC_IOASCR_G7_IO3 ((uint32_t)0x04000000) /*!<GROUP7_IO3 analog switch enable */
+#define TSC_IOASCR_G7_IO4 ((uint32_t)0x08000000) /*!<GROUP7_IO4 analog switch enable */
+#define TSC_IOASCR_G8_IO1 ((uint32_t)0x10000000) /*!<GROUP8_IO1 analog switch enable */
+#define TSC_IOASCR_G8_IO2 ((uint32_t)0x20000000) /*!<GROUP8_IO2 analog switch enable */
+#define TSC_IOASCR_G8_IO3 ((uint32_t)0x40000000) /*!<GROUP8_IO3 analog switch enable */
+#define TSC_IOASCR_G8_IO4 ((uint32_t)0x80000000) /*!<GROUP8_IO4 analog switch enable */
+
+/******************* Bit definition for TSC_IOSCR register ******************/
+#define TSC_IOSCR_G1_IO1 ((uint32_t)0x00000001) /*!<GROUP1_IO1 sampling mode */
+#define TSC_IOSCR_G1_IO2 ((uint32_t)0x00000002) /*!<GROUP1_IO2 sampling mode */
+#define TSC_IOSCR_G1_IO3 ((uint32_t)0x00000004) /*!<GROUP1_IO3 sampling mode */
+#define TSC_IOSCR_G1_IO4 ((uint32_t)0x00000008) /*!<GROUP1_IO4 sampling mode */
+#define TSC_IOSCR_G2_IO1 ((uint32_t)0x00000010) /*!<GROUP2_IO1 sampling mode */
+#define TSC_IOSCR_G2_IO2 ((uint32_t)0x00000020) /*!<GROUP2_IO2 sampling mode */
+#define TSC_IOSCR_G2_IO3 ((uint32_t)0x00000040) /*!<GROUP2_IO3 sampling mode */
+#define TSC_IOSCR_G2_IO4 ((uint32_t)0x00000080) /*!<GROUP2_IO4 sampling mode */
+#define TSC_IOSCR_G3_IO1 ((uint32_t)0x00000100) /*!<GROUP3_IO1 sampling mode */
+#define TSC_IOSCR_G3_IO2 ((uint32_t)0x00000200) /*!<GROUP3_IO2 sampling mode */
+#define TSC_IOSCR_G3_IO3 ((uint32_t)0x00000400) /*!<GROUP3_IO3 sampling mode */
+#define TSC_IOSCR_G3_IO4 ((uint32_t)0x00000800) /*!<GROUP3_IO4 sampling mode */
+#define TSC_IOSCR_G4_IO1 ((uint32_t)0x00001000) /*!<GROUP4_IO1 sampling mode */
+#define TSC_IOSCR_G4_IO2 ((uint32_t)0x00002000) /*!<GROUP4_IO2 sampling mode */
+#define TSC_IOSCR_G4_IO3 ((uint32_t)0x00004000) /*!<GROUP4_IO3 sampling mode */
+#define TSC_IOSCR_G4_IO4 ((uint32_t)0x00008000) /*!<GROUP4_IO4 sampling mode */
+#define TSC_IOSCR_G5_IO1 ((uint32_t)0x00010000) /*!<GROUP5_IO1 sampling mode */
+#define TSC_IOSCR_G5_IO2 ((uint32_t)0x00020000) /*!<GROUP5_IO2 sampling mode */
+#define TSC_IOSCR_G5_IO3 ((uint32_t)0x00040000) /*!<GROUP5_IO3 sampling mode */
+#define TSC_IOSCR_G5_IO4 ((uint32_t)0x00080000) /*!<GROUP5_IO4 sampling mode */
+#define TSC_IOSCR_G6_IO1 ((uint32_t)0x00100000) /*!<GROUP6_IO1 sampling mode */
+#define TSC_IOSCR_G6_IO2 ((uint32_t)0x00200000) /*!<GROUP6_IO2 sampling mode */
+#define TSC_IOSCR_G6_IO3 ((uint32_t)0x00400000) /*!<GROUP6_IO3 sampling mode */
+#define TSC_IOSCR_G6_IO4 ((uint32_t)0x00800000) /*!<GROUP6_IO4 sampling mode */
+#define TSC_IOSCR_G7_IO1 ((uint32_t)0x01000000) /*!<GROUP7_IO1 sampling mode */
+#define TSC_IOSCR_G7_IO2 ((uint32_t)0x02000000) /*!<GROUP7_IO2 sampling mode */
+#define TSC_IOSCR_G7_IO3 ((uint32_t)0x04000000) /*!<GROUP7_IO3 sampling mode */
+#define TSC_IOSCR_G7_IO4 ((uint32_t)0x08000000) /*!<GROUP7_IO4 sampling mode */
+#define TSC_IOSCR_G8_IO1 ((uint32_t)0x10000000) /*!<GROUP8_IO1 sampling mode */
+#define TSC_IOSCR_G8_IO2 ((uint32_t)0x20000000) /*!<GROUP8_IO2 sampling mode */
+#define TSC_IOSCR_G8_IO3 ((uint32_t)0x40000000) /*!<GROUP8_IO3 sampling mode */
+#define TSC_IOSCR_G8_IO4 ((uint32_t)0x80000000) /*!<GROUP8_IO4 sampling mode */
+
+/******************* Bit definition for TSC_IOCCR register ******************/
+#define TSC_IOCCR_G1_IO1 ((uint32_t)0x00000001) /*!<GROUP1_IO1 channel mode */
+#define TSC_IOCCR_G1_IO2 ((uint32_t)0x00000002) /*!<GROUP1_IO2 channel mode */
+#define TSC_IOCCR_G1_IO3 ((uint32_t)0x00000004) /*!<GROUP1_IO3 channel mode */
+#define TSC_IOCCR_G1_IO4 ((uint32_t)0x00000008) /*!<GROUP1_IO4 channel mode */
+#define TSC_IOCCR_G2_IO1 ((uint32_t)0x00000010) /*!<GROUP2_IO1 channel mode */
+#define TSC_IOCCR_G2_IO2 ((uint32_t)0x00000020) /*!<GROUP2_IO2 channel mode */
+#define TSC_IOCCR_G2_IO3 ((uint32_t)0x00000040) /*!<GROUP2_IO3 channel mode */
+#define TSC_IOCCR_G2_IO4 ((uint32_t)0x00000080) /*!<GROUP2_IO4 channel mode */
+#define TSC_IOCCR_G3_IO1 ((uint32_t)0x00000100) /*!<GROUP3_IO1 channel mode */
+#define TSC_IOCCR_G3_IO2 ((uint32_t)0x00000200) /*!<GROUP3_IO2 channel mode */
+#define TSC_IOCCR_G3_IO3 ((uint32_t)0x00000400) /*!<GROUP3_IO3 channel mode */
+#define TSC_IOCCR_G3_IO4 ((uint32_t)0x00000800) /*!<GROUP3_IO4 channel mode */
+#define TSC_IOCCR_G4_IO1 ((uint32_t)0x00001000) /*!<GROUP4_IO1 channel mode */
+#define TSC_IOCCR_G4_IO2 ((uint32_t)0x00002000) /*!<GROUP4_IO2 channel mode */
+#define TSC_IOCCR_G4_IO3 ((uint32_t)0x00004000) /*!<GROUP4_IO3 channel mode */
+#define TSC_IOCCR_G4_IO4 ((uint32_t)0x00008000) /*!<GROUP4_IO4 channel mode */
+#define TSC_IOCCR_G5_IO1 ((uint32_t)0x00010000) /*!<GROUP5_IO1 channel mode */
+#define TSC_IOCCR_G5_IO2 ((uint32_t)0x00020000) /*!<GROUP5_IO2 channel mode */
+#define TSC_IOCCR_G5_IO3 ((uint32_t)0x00040000) /*!<GROUP5_IO3 channel mode */
+#define TSC_IOCCR_G5_IO4 ((uint32_t)0x00080000) /*!<GROUP5_IO4 channel mode */
+#define TSC_IOCCR_G6_IO1 ((uint32_t)0x00100000) /*!<GROUP6_IO1 channel mode */
+#define TSC_IOCCR_G6_IO2 ((uint32_t)0x00200000) /*!<GROUP6_IO2 channel mode */
+#define TSC_IOCCR_G6_IO3 ((uint32_t)0x00400000) /*!<GROUP6_IO3 channel mode */
+#define TSC_IOCCR_G6_IO4 ((uint32_t)0x00800000) /*!<GROUP6_IO4 channel mode */
+#define TSC_IOCCR_G7_IO1 ((uint32_t)0x01000000) /*!<GROUP7_IO1 channel mode */
+#define TSC_IOCCR_G7_IO2 ((uint32_t)0x02000000) /*!<GROUP7_IO2 channel mode */
+#define TSC_IOCCR_G7_IO3 ((uint32_t)0x04000000) /*!<GROUP7_IO3 channel mode */
+#define TSC_IOCCR_G7_IO4 ((uint32_t)0x08000000) /*!<GROUP7_IO4 channel mode */
+#define TSC_IOCCR_G8_IO1 ((uint32_t)0x10000000) /*!<GROUP8_IO1 channel mode */
+#define TSC_IOCCR_G8_IO2 ((uint32_t)0x20000000) /*!<GROUP8_IO2 channel mode */
+#define TSC_IOCCR_G8_IO3 ((uint32_t)0x40000000) /*!<GROUP8_IO3 channel mode */
+#define TSC_IOCCR_G8_IO4 ((uint32_t)0x80000000) /*!<GROUP8_IO4 channel mode */
+
+/******************* Bit definition for TSC_IOGCSR register *****************/
+#define TSC_IOGCSR_G1E ((uint32_t)0x00000001) /*!<Analog IO GROUP1 enable */
+#define TSC_IOGCSR_G2E ((uint32_t)0x00000002) /*!<Analog IO GROUP2 enable */
+#define TSC_IOGCSR_G3E ((uint32_t)0x00000004) /*!<Analog IO GROUP3 enable */
+#define TSC_IOGCSR_G4E ((uint32_t)0x00000008) /*!<Analog IO GROUP4 enable */
+#define TSC_IOGCSR_G5E ((uint32_t)0x00000010) /*!<Analog IO GROUP5 enable */
+#define TSC_IOGCSR_G6E ((uint32_t)0x00000020) /*!<Analog IO GROUP6 enable */
+#define TSC_IOGCSR_G7E ((uint32_t)0x00000040) /*!<Analog IO GROUP7 enable */
+#define TSC_IOGCSR_G8E ((uint32_t)0x00000080) /*!<Analog IO GROUP8 enable */
+#define TSC_IOGCSR_G1S ((uint32_t)0x00010000) /*!<Analog IO GROUP1 status */
+#define TSC_IOGCSR_G2S ((uint32_t)0x00020000) /*!<Analog IO GROUP2 status */
+#define TSC_IOGCSR_G3S ((uint32_t)0x00040000) /*!<Analog IO GROUP3 status */
+#define TSC_IOGCSR_G4S ((uint32_t)0x00080000) /*!<Analog IO GROUP4 status */
+#define TSC_IOGCSR_G5S ((uint32_t)0x00100000) /*!<Analog IO GROUP5 status */
+#define TSC_IOGCSR_G6S ((uint32_t)0x00200000) /*!<Analog IO GROUP6 status */
+#define TSC_IOGCSR_G7S ((uint32_t)0x00400000) /*!<Analog IO GROUP7 status */
+#define TSC_IOGCSR_G8S ((uint32_t)0x00800000) /*!<Analog IO GROUP8 status */
+
+/******************* Bit definition for TSC_IOGXCR register *****************/
+#define TSC_IOGXCR_CNT ((uint32_t)0x00003FFF) /*!<CNT[13:0] bits (Counter value) */
+
+/******************************************************************************/
+/* */
+/* Universal Synchronous Asynchronous Receiver Transmitter (USART) */
+/* */
+/******************************************************************************/
+/****************** Bit definition for USART_CR1 register *******************/
+#define USART_CR1_UE ((uint32_t)0x00000001) /*!< USART Enable */
+#define USART_CR1_UESM ((uint32_t)0x00000002) /*!< USART Enable in STOP Mode */
+#define USART_CR1_RE ((uint32_t)0x00000004) /*!< Receiver Enable */
+#define USART_CR1_TE ((uint32_t)0x00000008) /*!< Transmitter Enable */
+#define USART_CR1_IDLEIE ((uint32_t)0x00000010) /*!< IDLE Interrupt Enable */
+#define USART_CR1_RXNEIE ((uint32_t)0x00000020) /*!< RXNE Interrupt Enable */
+#define USART_CR1_TCIE ((uint32_t)0x00000040) /*!< Transmission Complete Interrupt Enable */
+#define USART_CR1_TXEIE ((uint32_t)0x00000080) /*!< TXE Interrupt Enable */
+#define USART_CR1_PEIE ((uint32_t)0x00000100) /*!< PE Interrupt Enable */
+#define USART_CR1_PS ((uint32_t)0x00000200) /*!< Parity Selection */
+#define USART_CR1_PCE ((uint32_t)0x00000400) /*!< Parity Control Enable */
+#define USART_CR1_WAKE ((uint32_t)0x00000800) /*!< Receiver Wakeup method */
+#define USART_CR1_M0 ((uint32_t)0x00001000) /*!< Word length bit 0 */
+#define USART_CR1_MME ((uint32_t)0x00002000) /*!< Mute Mode Enable */
+#define USART_CR1_CMIE ((uint32_t)0x00004000) /*!< Character match interrupt enable */
+#define USART_CR1_OVER8 ((uint32_t)0x00008000) /*!< Oversampling by 8-bit or 16-bit mode */
+#define USART_CR1_DEDT ((uint32_t)0x001F0000) /*!< DEDT[4:0] bits (Driver Enable Deassertion Time) */
+#define USART_CR1_DEDT_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define USART_CR1_DEDT_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define USART_CR1_DEDT_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define USART_CR1_DEDT_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+#define USART_CR1_DEDT_4 ((uint32_t)0x00100000) /*!< Bit 4 */
+#define USART_CR1_DEAT ((uint32_t)0x03E00000) /*!< DEAT[4:0] bits (Driver Enable Assertion Time) */
+#define USART_CR1_DEAT_0 ((uint32_t)0x00200000) /*!< Bit 0 */
+#define USART_CR1_DEAT_1 ((uint32_t)0x00400000) /*!< Bit 1 */
+#define USART_CR1_DEAT_2 ((uint32_t)0x00800000) /*!< Bit 2 */
+#define USART_CR1_DEAT_3 ((uint32_t)0x01000000) /*!< Bit 3 */
+#define USART_CR1_DEAT_4 ((uint32_t)0x02000000) /*!< Bit 4 */
+#define USART_CR1_RTOIE ((uint32_t)0x04000000) /*!< Receive Time Out interrupt enable */
+#define USART_CR1_EOBIE ((uint32_t)0x08000000) /*!< End of Block interrupt enable */
+#define USART_CR1_M1 ((uint32_t)0x10000000) /*!< Word length bit 1 */
+#define USART_CR1_M ((uint32_t)0x10001000) /*!< [M1:M0] Word length */
+
+/****************** Bit definition for USART_CR2 register *******************/
+#define USART_CR2_ADDM7 ((uint32_t)0x00000010) /*!< 7-bit or 4-bit Address Detection */
+#define USART_CR2_LBDL ((uint32_t)0x00000020) /*!< LIN Break Detection Length */
+#define USART_CR2_LBDIE ((uint32_t)0x00000040) /*!< LIN Break Detection Interrupt Enable */
+#define USART_CR2_LBCL ((uint32_t)0x00000100) /*!< Last Bit Clock pulse */
+#define USART_CR2_CPHA ((uint32_t)0x00000200) /*!< Clock Phase */
+#define USART_CR2_CPOL ((uint32_t)0x00000400) /*!< Clock Polarity */
+#define USART_CR2_CLKEN ((uint32_t)0x00000800) /*!< Clock Enable */
+#define USART_CR2_STOP ((uint32_t)0x00003000) /*!< STOP[1:0] bits (STOP bits) */
+#define USART_CR2_STOP_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define USART_CR2_STOP_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+#define USART_CR2_LINEN ((uint32_t)0x00004000) /*!< LIN mode enable */
+#define USART_CR2_SWAP ((uint32_t)0x00008000) /*!< SWAP TX/RX pins */
+#define USART_CR2_RXINV ((uint32_t)0x00010000) /*!< RX pin active level inversion */
+#define USART_CR2_TXINV ((uint32_t)0x00020000) /*!< TX pin active level inversion */
+#define USART_CR2_DATAINV ((uint32_t)0x00040000) /*!< Binary data inversion */
+#define USART_CR2_MSBFIRST ((uint32_t)0x00080000) /*!< Most Significant Bit First */
+#define USART_CR2_ABREN ((uint32_t)0x00100000) /*!< Auto Baud-Rate Enable*/
+#define USART_CR2_ABRMODE ((uint32_t)0x00600000) /*!< ABRMOD[1:0] bits (Auto Baud-Rate Mode) */
+#define USART_CR2_ABRMODE_0 ((uint32_t)0x00200000) /*!< Bit 0 */
+#define USART_CR2_ABRMODE_1 ((uint32_t)0x00400000) /*!< Bit 1 */
+#define USART_CR2_RTOEN ((uint32_t)0x00800000) /*!< Receiver Time-Out enable */
+#define USART_CR2_ADD ((uint32_t)0xFF000000) /*!< Address of the USART node */
+
+/****************** Bit definition for USART_CR3 register *******************/
+#define USART_CR3_EIE ((uint32_t)0x00000001) /*!< Error Interrupt Enable */
+#define USART_CR3_IREN ((uint32_t)0x00000002) /*!< IrDA mode Enable */
+#define USART_CR3_IRLP ((uint32_t)0x00000004) /*!< IrDA Low-Power */
+#define USART_CR3_HDSEL ((uint32_t)0x00000008) /*!< Half-Duplex Selection */
+#define USART_CR3_NACK ((uint32_t)0x00000010) /*!< SmartCard NACK enable */
+#define USART_CR3_SCEN ((uint32_t)0x00000020) /*!< SmartCard mode enable */
+#define USART_CR3_DMAR ((uint32_t)0x00000040) /*!< DMA Enable Receiver */
+#define USART_CR3_DMAT ((uint32_t)0x00000080) /*!< DMA Enable Transmitter */
+#define USART_CR3_RTSE ((uint32_t)0x00000100) /*!< RTS Enable */
+#define USART_CR3_CTSE ((uint32_t)0x00000200) /*!< CTS Enable */
+#define USART_CR3_CTSIE ((uint32_t)0x00000400) /*!< CTS Interrupt Enable */
+#define USART_CR3_ONEBIT ((uint32_t)0x00000800) /*!< One sample bit method enable */
+#define USART_CR3_OVRDIS ((uint32_t)0x00001000) /*!< Overrun Disable */
+#define USART_CR3_DDRE ((uint32_t)0x00002000) /*!< DMA Disable on Reception Error */
+#define USART_CR3_DEM ((uint32_t)0x00004000) /*!< Driver Enable Mode */
+#define USART_CR3_DEP ((uint32_t)0x00008000) /*!< Driver Enable Polarity Selection */
+#define USART_CR3_SCARCNT ((uint32_t)0x000E0000) /*!< SCARCNT[2:0] bits (SmartCard Auto-Retry Count) */
+#define USART_CR3_SCARCNT_0 ((uint32_t)0x00020000) /*!< Bit 0 */
+#define USART_CR3_SCARCNT_1 ((uint32_t)0x00040000) /*!< Bit 1 */
+#define USART_CR3_SCARCNT_2 ((uint32_t)0x00080000) /*!< Bit 2 */
+#define USART_CR3_WUS ((uint32_t)0x00300000) /*!< WUS[1:0] bits (Wake UP Interrupt Flag Selection) */
+#define USART_CR3_WUS_0 ((uint32_t)0x00100000) /*!< Bit 0 */
+#define USART_CR3_WUS_1 ((uint32_t)0x00200000) /*!< Bit 1 */
+#define USART_CR3_WUFIE ((uint32_t)0x00400000) /*!< Wake Up Interrupt Enable */
+
+/****************** Bit definition for USART_BRR register *******************/
+#define USART_BRR_DIV_FRACTION ((uint32_t)0x0000000F) /*!< Fraction of USARTDIV */
+#define USART_BRR_DIV_MANTISSA ((uint32_t)0x0000FFF0) /*!< Mantissa of USARTDIV */
+
+/****************** Bit definition for USART_GTPR register ******************/
+#define USART_GTPR_PSC ((uint32_t)0x000000FF) /*!< PSC[7:0] bits (Prescaler value) */
+#define USART_GTPR_GT ((uint32_t)0x0000FF00) /*!< GT[7:0] bits (Guard time value) */
+
+
+/******************* Bit definition for USART_RTOR register *****************/
+#define USART_RTOR_RTO ((uint32_t)0x00FFFFFF) /*!< Receiver Time Out Value */
+#define USART_RTOR_BLEN ((uint32_t)0xFF000000) /*!< Block Length */
+
+/******************* Bit definition for USART_RQR register ******************/
+#define USART_RQR_ABRRQ ((uint32_t)0x00000001) /*!< Auto-Baud Rate Request */
+#define USART_RQR_SBKRQ ((uint32_t)0x00000002) /*!< Send Break Request */
+#define USART_RQR_MMRQ ((uint32_t)0x00000004) /*!< Mute Mode Request */
+#define USART_RQR_RXFRQ ((uint32_t)0x00000008) /*!< Receive Data flush Request */
+#define USART_RQR_TXFRQ ((uint32_t)0x00000010) /*!< Transmit data flush Request */
+
+/******************* Bit definition for USART_ISR register ******************/
+#define USART_ISR_PE ((uint32_t)0x00000001) /*!< Parity Error */
+#define USART_ISR_FE ((uint32_t)0x00000002) /*!< Framing Error */
+#define USART_ISR_NE ((uint32_t)0x00000004) /*!< Noise detected Flag */
+#define USART_ISR_ORE ((uint32_t)0x00000008) /*!< OverRun Error */
+#define USART_ISR_IDLE ((uint32_t)0x00000010) /*!< IDLE line detected */
+#define USART_ISR_RXNE ((uint32_t)0x00000020) /*!< Read Data Register Not Empty */
+#define USART_ISR_TC ((uint32_t)0x00000040) /*!< Transmission Complete */
+#define USART_ISR_TXE ((uint32_t)0x00000080) /*!< Transmit Data Register Empty */
+#define USART_ISR_LBDF ((uint32_t)0x00000100) /*!< LIN Break Detection Flag */
+#define USART_ISR_CTSIF ((uint32_t)0x00000200) /*!< CTS interrupt flag */
+#define USART_ISR_CTS ((uint32_t)0x00000400) /*!< CTS flag */
+#define USART_ISR_RTOF ((uint32_t)0x00000800) /*!< Receiver Time Out */
+#define USART_ISR_EOBF ((uint32_t)0x00001000) /*!< End Of Block Flag */
+#define USART_ISR_ABRE ((uint32_t)0x00004000) /*!< Auto-Baud Rate Error */
+#define USART_ISR_ABRF ((uint32_t)0x00008000) /*!< Auto-Baud Rate Flag */
+#define USART_ISR_BUSY ((uint32_t)0x00010000) /*!< Busy Flag */
+#define USART_ISR_CMF ((uint32_t)0x00020000) /*!< Character Match Flag */
+#define USART_ISR_SBKF ((uint32_t)0x00040000) /*!< Send Break Flag */
+#define USART_ISR_RWU ((uint32_t)0x00080000) /*!< Receive Wake Up from mute mode Flag */
+#define USART_ISR_WUF ((uint32_t)0x00100000) /*!< Wake Up from stop mode Flag */
+#define USART_ISR_TEACK ((uint32_t)0x00200000) /*!< Transmit Enable Acknowledge Flag */
+#define USART_ISR_REACK ((uint32_t)0x00400000) /*!< Receive Enable Acknowledge Flag */
+
+/******************* Bit definition for USART_ICR register ******************/
+#define USART_ICR_PECF ((uint32_t)0x00000001) /*!< Parity Error Clear Flag */
+#define USART_ICR_FECF ((uint32_t)0x00000002) /*!< Framing Error Clear Flag */
+#define USART_ICR_NCF ((uint32_t)0x00000004) /*!< Noise detected Clear Flag */
+#define USART_ICR_ORECF ((uint32_t)0x00000008) /*!< OverRun Error Clear Flag */
+#define USART_ICR_IDLECF ((uint32_t)0x00000010) /*!< IDLE line detected Clear Flag */
+#define USART_ICR_TCCF ((uint32_t)0x00000040) /*!< Transmission Complete Clear Flag */
+#define USART_ICR_LBDCF ((uint32_t)0x00000100) /*!< LIN Break Detection Clear Flag */
+#define USART_ICR_CTSCF ((uint32_t)0x00000200) /*!< CTS Interrupt Clear Flag */
+#define USART_ICR_RTOCF ((uint32_t)0x00000800) /*!< Receiver Time Out Clear Flag */
+#define USART_ICR_EOBCF ((uint32_t)0x00001000) /*!< End Of Block Clear Flag */
+#define USART_ICR_CMCF ((uint32_t)0x00020000) /*!< Character Match Clear Flag */
+#define USART_ICR_WUCF ((uint32_t)0x00100000) /*!< Wake Up from stop mode Clear Flag */
+
+/******************* Bit definition for USART_RDR register ******************/
+#define USART_RDR_RDR ((uint16_t)0x01FF) /*!< RDR[8:0] bits (Receive Data value) */
+
+/******************* Bit definition for USART_TDR register ******************/
+#define USART_TDR_TDR ((uint16_t)0x01FF) /*!< TDR[8:0] bits (Transmit Data value) */
+
+/******************************************************************************/
+/* */
+/* Window WATCHDOG (WWDG) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for WWDG_CR register ********************/
+#define WWDG_CR_T ((uint32_t)0x7F) /*!<T[6:0] bits (7-Bit counter (MSB to LSB)) */
+#define WWDG_CR_T0 ((uint32_t)0x01) /*!<Bit 0 */
+#define WWDG_CR_T1 ((uint32_t)0x02) /*!<Bit 1 */
+#define WWDG_CR_T2 ((uint32_t)0x04) /*!<Bit 2 */
+#define WWDG_CR_T3 ((uint32_t)0x08) /*!<Bit 3 */
+#define WWDG_CR_T4 ((uint32_t)0x10) /*!<Bit 4 */
+#define WWDG_CR_T5 ((uint32_t)0x20) /*!<Bit 5 */
+#define WWDG_CR_T6 ((uint32_t)0x40) /*!<Bit 6 */
+
+#define WWDG_CR_WDGA ((uint32_t)0x80) /*!<Activation bit */
+
+/******************* Bit definition for WWDG_CFR register *******************/
+#define WWDG_CFR_W ((uint32_t)0x007F) /*!<W[6:0] bits (7-bit window value) */
+#define WWDG_CFR_W0 ((uint32_t)0x0001) /*!<Bit 0 */
+#define WWDG_CFR_W1 ((uint32_t)0x0002) /*!<Bit 1 */
+#define WWDG_CFR_W2 ((uint32_t)0x0004) /*!<Bit 2 */
+#define WWDG_CFR_W3 ((uint32_t)0x0008) /*!<Bit 3 */
+#define WWDG_CFR_W4 ((uint32_t)0x0010) /*!<Bit 4 */
+#define WWDG_CFR_W5 ((uint32_t)0x0020) /*!<Bit 5 */
+#define WWDG_CFR_W6 ((uint32_t)0x0040) /*!<Bit 6 */
+
+#define WWDG_CFR_WDGTB ((uint32_t)0x0180) /*!<WDGTB[1:0] bits (Timer Base) */
+#define WWDG_CFR_WDGTB0 ((uint32_t)0x0080) /*!<Bit 0 */
+#define WWDG_CFR_WDGTB1 ((uint32_t)0x0100) /*!<Bit 1 */
+
+#define WWDG_CFR_EWI ((uint32_t)0x0200) /*!<Early Wakeup Interrupt */
+
+/******************* Bit definition for WWDG_SR register ********************/
+#define WWDG_SR_EWIF ((uint32_t)0x01) /*!<Early Wakeup Interrupt Flag */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+
+/** @addtogroup Exported_macro
+ * @{
+ */
+
+/****************************** ADC Instances *********************************/
+#define IS_ADC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == ADC1)
+
+#define IS_ADC_COMMON_INSTANCE(INSTANCE) ((INSTANCE) == ADC)
+
+/******************************* CAN Instances ********************************/
+#define IS_CAN_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CAN)
+
+/****************************** COMP Instances *********************************/
+#define IS_COMP_ALL_INSTANCE(INSTANCE) (((INSTANCE) == COMP1) || \
+ ((INSTANCE) == COMP2))
+
+#define IS_COMP_DAC1SWITCH_INSTANCE(INSTANCE) ((INSTANCE) == COMP1)
+
+#define IS_COMP_WINDOWMODE_INSTANCE(INSTANCE) ((INSTANCE) == COMP2)
+
+/****************************** CEC Instances *********************************/
+#define IS_CEC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CEC)
+
+/****************************** CRC Instances *********************************/
+#define IS_CRC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CRC)
+
+/******************************* DAC Instances ********************************/
+#define IS_DAC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == DAC)
+
+/******************************* DMA Instances ******************************/
+#define IS_DMA_ALL_INSTANCE(INSTANCE) (((INSTANCE) == DMA1_Channel1) || \
+ ((INSTANCE) == DMA1_Channel2) || \
+ ((INSTANCE) == DMA1_Channel3) || \
+ ((INSTANCE) == DMA1_Channel4) || \
+ ((INSTANCE) == DMA1_Channel5) || \
+ ((INSTANCE) == DMA1_Channel6) || \
+ ((INSTANCE) == DMA1_Channel7) || \
+ ((INSTANCE) == DMA2_Channel1) || \
+ ((INSTANCE) == DMA2_Channel2) || \
+ ((INSTANCE) == DMA2_Channel3) || \
+ ((INSTANCE) == DMA2_Channel4) || \
+ ((INSTANCE) == DMA2_Channel5))
+
+/****************************** GPIO Instances ********************************/
+#define IS_GPIO_ALL_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB) || \
+ ((INSTANCE) == GPIOC) || \
+ ((INSTANCE) == GPIOD) || \
+ ((INSTANCE) == GPIOE) || \
+ ((INSTANCE) == GPIOF))
+
+#define IS_GPIO_AF_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB) || \
+ ((INSTANCE) == GPIOC) || \
+ ((INSTANCE) == GPIOD) || \
+ ((INSTANCE) == GPIOE) || \
+ ((INSTANCE) == GPIOF))
+
+#define IS_GPIO_LOCK_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB))
+
+/****************************** I2C Instances *********************************/
+#define IS_I2C_ALL_INSTANCE(INSTANCE) (((INSTANCE) == I2C1) || \
+ ((INSTANCE) == I2C2))
+
+/****************************** I2S Instances *********************************/
+#define IS_I2S_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
+ ((INSTANCE) == SPI2))
+
+/****************************** IWDG Instances ********************************/
+#define IS_IWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == IWDG)
+
+/****************************** RTC Instances *********************************/
+#define IS_RTC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == RTC)
+
+/****************************** SMBUS Instances *********************************/
+#define IS_SMBUS_ALL_INSTANCE(INSTANCE) ((INSTANCE) == I2C1)
+
+/****************************** SPI Instances *********************************/
+#define IS_SPI_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
+ ((INSTANCE) == SPI2))
+
+/****************************** TIM Instances *********************************/
+#define IS_TIM_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM6) || \
+ ((INSTANCE) == TIM7) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CC1_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CC2_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_CC3_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CC4_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_TIX_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_ENCODER_INTERFACE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_HALL_INTERFACE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1))
+
+#define IS_TIM_XOR_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_MASTER_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM6) || \
+ ((INSTANCE) == TIM7) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_SLAVE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_32B_COUNTER_INSTANCE(INSTANCE)\
+ ((INSTANCE) == TIM2)
+
+#define IS_TIM_DMABURST_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_BREAK_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CCX_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM2) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM3) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM14) && \
+ (((CHANNEL) == TIM_CHANNEL_1))) \
+ || \
+ (((INSTANCE) == TIM15) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))) \
+ || \
+ (((INSTANCE) == TIM16) && \
+ (((CHANNEL) == TIM_CHANNEL_1))) \
+ || \
+ (((INSTANCE) == TIM17) && \
+ (((CHANNEL) == TIM_CHANNEL_1))))
+
+#define IS_TIM_CCXN_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3))) \
+ || \
+ (((INSTANCE) == TIM15) && \
+ ((CHANNEL) == TIM_CHANNEL_1)) \
+ || \
+ (((INSTANCE) == TIM16) && \
+ ((CHANNEL) == TIM_CHANNEL_1)) \
+ || \
+ (((INSTANCE) == TIM17) && \
+ ((CHANNEL) == TIM_CHANNEL_1)))
+
+#define IS_TIM_COUNTER_MODE_SELECT_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_REPETITION_COUNTER_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CLOCK_DIVISION_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_DMA_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM6) || \
+ ((INSTANCE) == TIM7) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_DMA_CC_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_COMMUTATION_EVENT_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_REMAP_INSTANCE(INSTANCE)\
+ ((INSTANCE) == TIM14)
+
+/****************************** TSC Instances *********************************/
+#define IS_TSC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == TSC)
+
+/*********************** UART Instances : IRDA mode ***************************/
+#define IS_IRDA_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3))
+
+/********************* UART Instances : Smard card mode ***********************/
+#define IS_SMARTCARD_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3))
+
+/******************** USART Instances : Synchronous mode **********************/
+#define IS_USART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3) || \
+ ((INSTANCE) == USART4) || \
+ ((INSTANCE) == USART5) || \
+ ((INSTANCE) == USART6) || \
+ ((INSTANCE) == USART7) || \
+ ((INSTANCE) == USART8))
+
+/******************** USART Instances : auto Baud rate detection **************/
+#define IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3))
+
+/******************** UART Instances : Asynchronous mode **********************/
+#define IS_UART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3) || \
+ ((INSTANCE) == USART4) || \
+ ((INSTANCE) == USART5) || \
+ ((INSTANCE) == USART6) || \
+ ((INSTANCE) == USART7) || \
+ ((INSTANCE) == USART8))
+
+/******************** UART Instances : Half-Duplex mode **********************/
+#define IS_UART_HALFDUPLEX_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3) || \
+ ((INSTANCE) == USART4) || \
+ ((INSTANCE) == USART5) || \
+ ((INSTANCE) == USART6) || \
+ ((INSTANCE) == USART7) || \
+ ((INSTANCE) == USART8))
+
+/****************** UART Instances : Hardware Flow control ********************/
+#define IS_UART_HWFLOW_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3) || \
+ ((INSTANCE) == USART4) || \
+ ((INSTANCE) == USART5) || \
+ ((INSTANCE) == USART6) || \
+ ((INSTANCE) == USART7) || \
+ ((INSTANCE) == USART8))
+
+/****************** UART Instances : LIN mode ********************/
+#define IS_UART_LIN_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3))
+
+/****************** UART Instances : wakeup from stop mode ********************/
+#define IS_UART_WAKEUP_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3))
+
+/****************** UART Instances : Auto Baud Rate detection ********************/
+#define IS_UART_AUTOBAUDRATE_DETECTION_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3))
+
+/****************** UART Instances : Driver enable detection ********************/
+#define IS_UART_DRIVER_ENABLE_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3) || \
+ ((INSTANCE) == USART4) || \
+ ((INSTANCE) == USART5) || \
+ ((INSTANCE) == USART6) || \
+ ((INSTANCE) == USART7) || \
+ ((INSTANCE) == USART8))
+
+/****************************** WWDG Instances ********************************/
+#define IS_WWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == WWDG)
+
+/**
+ * @}
+ */
+
+/******************************************************************************/
+/* For a painless codes migration between the STM32F3xx device product */
+/* lines, the aliases defined below are put in place to overcome the */
+/* differences in the interrupt handlers and IRQn definitions. */
+/* No need to update developed interrupt code when moving across */
+/* product lines within the same STM32L0 Family */
+/******************************************************************************/
+
+/* Aliases for __IRQn */
+#define PVD_IRQn PVD_VDDIO2_IRQn
+#define VDDIO2_IRQn PVD_VDDIO2_IRQn
+#define RCC_IRQn RCC_CRS_IRQn
+#define DMA1_Channel1_IRQn DMA1_Ch1_IRQn
+#define DMA1_Channel2_3_IRQn DMA1_Ch2_3_DMA2_Ch1_2_IRQn
+#define DMA1_Channel4_5_IRQn DMA1_Ch4_7_DMA2_Ch3_5_IRQn
+#define DMA1_Channel4_5_6_7_IRQn DMA1_Ch4_7_DMA2_Ch3_5_IRQn
+#define ADC1_IRQn ADC1_COMP_IRQn
+#define TIM6_IRQn TIM6_DAC_IRQn
+#define USART3_4_IRQn USART3_8_IRQn
+
+/* Aliases for __IRQHandler */
+#define PVD_IRQHandler PVD_VDDIO2_IRQHandler
+#define VDDIO2_IRQHandler PVD_VDDIO2_IRQHandler
+#define RCC_IRQHandler RCC_CRS_IRQHandler
+#define DMA1_Channel1_IRQHandler DMA1_Ch1_IRQHandler
+#define DMA1_Channel2_3_IRQHandler DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
+#define DMA1_Channel4_5_IRQHandler DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
+#define DMA1_Channel4_5_6_7_IRQHandler DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
+#define ADC1_IRQHandler ADC1_COMP_IRQHandler
+#define TIM6_IRQHandler TIM6_DAC_IRQHandler
+#define USART3_4_IRQHandler USART3_8_IRQHandler
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F091xC_H */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/include/devices/stm32f098xx.h b/f0/include/devices/stm32f098xx.h
new file mode 100755
index 0000000000000000000000000000000000000000..21679adc29e87a3ee9325d37031f5dc63c85e182
--- /dev/null
+++ b/f0/include/devices/stm32f098xx.h
@@ -0,0 +1,5668 @@
+/**
+ ******************************************************************************
+ * @file stm32f098xx.h
+ * @author MCD Application Team
+ * @version V2.2.1
+ * @date 09-January-2015
+ * @brief CMSIS STM32F098xx devices Peripheral Access Layer Header File.
+ *
+ * This file contains:
+ * - Data structures and the address mapping for all peripherals
+ * - Peripheral's registers declarations and bits definition
+ * - Macros to access peripheral’s registers hardware
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS_Device
+ * @{
+ */
+
+/** @addtogroup stm32f098xx
+ * @{
+ */
+
+#ifndef __STM32F098xx_H
+#define __STM32F098xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+
+/**
+ * @brief Configuration of the Cortex-M0 Processor and Core Peripherals
+ */
+#define __CM0_REV 0 /*!< Core Revision r0p0 */
+#define __MPU_PRESENT 0 /*!< STM32F0xx do not provide MPU */
+#define __NVIC_PRIO_BITS 2 /*!< STM32F0xx uses 2 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F098xx device Interrupt Number Definition
+ */
+typedef enum
+{
+/****** Cortex-M0 Processor Exceptions Numbers **************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */
+ SVC_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */
+
+/****** STM32F091xC specific Interrupt Numbers **************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ VDDIO2_IRQn = 1, /*!< VDDIO2 Interrupt through EXTI Line 31 */
+ RTC_IRQn = 2, /*!< RTC Interrupt through EXTI Lines 17, 19 and 20 */
+ FLASH_IRQn = 3, /*!< FLASH global Interrupt */
+ RCC_CRS_IRQn = 4, /*!< RCC & CRS global Interrupts */
+ EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupts */
+ EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupts */
+ EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupts */
+ TSC_IRQn = 8, /*!< Touch Sensing Controller Interrupts */
+ DMA1_Ch1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */
+ DMA1_Ch2_3_DMA2_Ch1_2_IRQn = 10, /*!< DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2 Interrupts */
+ DMA1_Ch4_7_DMA2_Ch3_5_IRQn = 11, /*!< DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5 Interrupts */
+ ADC1_COMP_IRQn = 12, /*!< ADC, COMP1 and COMP2 Interrupts (EXTI Lines 21 and 22) */
+ TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupts */
+ TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 15, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 16, /*!< TIM3 global Interrupt */
+ TIM6_DAC_IRQn = 17, /*!< TIM6 global and DAC channel underrun error Interrupts */
+ TIM7_IRQn = 18, /*!< TIM7 global Interrupt */
+ TIM14_IRQn = 19, /*!< TIM14 global Interrupt */
+ TIM15_IRQn = 20, /*!< TIM15 global Interrupt */
+ TIM16_IRQn = 21, /*!< TIM16 global Interrupt */
+ TIM17_IRQn = 22, /*!< TIM17 global Interrupt */
+ I2C1_IRQn = 23, /*!< I2C1 Event Interrupt & EXTI Line23 Interrupt (I2C1 wakeup) */
+ I2C2_IRQn = 24, /*!< I2C2 Event Interrupt */
+ SPI1_IRQn = 25, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 26, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 27, /*!< USART1 global Interrupt & EXTI Line25 Interrupt (USART1 wakeup) */
+ USART2_IRQn = 28, /*!< USART2 global Interrupt & EXTI Line26 Interrupt (USART2 wakeup) */
+ USART3_8_IRQn = 29, /*!< USART3 to USART8 global Interrupts */
+ CEC_CAN_IRQn = 30 /*!< CEC and CAN global Interrupts & EXTI Line27 Interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm0.h" /* Cortex-M0 processor and core peripherals */
+#include "system_stm32f0xx.h" /* STM32F0xx System Header */
+#include <stdint.h>
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< ADC Interrupt and Status register, Address offset:0x00 */
+ __IO uint32_t IER; /*!< ADC Interrupt Enable register, Address offset:0x04 */
+ __IO uint32_t CR; /*!< ADC Control register, Address offset:0x08 */
+ __IO uint32_t CFGR1; /*!< ADC Configuration register 1, Address offset:0x0C */
+ __IO uint32_t CFGR2; /*!< ADC Configuration register 2, Address offset:0x10 */
+ __IO uint32_t SMPR; /*!< ADC Sampling time register, Address offset:0x14 */
+ uint32_t RESERVED1; /*!< Reserved, 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, 0x1C */
+ __IO uint32_t TR; /*!< ADC watchdog threshold register, Address offset:0x20 */
+ uint32_t RESERVED3; /*!< Reserved, 0x24 */
+ __IO uint32_t CHSELR; /*!< ADC channel selection register, Address offset:0x28 */
+ uint32_t RESERVED4[5]; /*!< Reserved, 0x2C */
+ __IO uint32_t DR; /*!< ADC data register, Address offset:0x40 */
+}ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CCR;
+}ADC_Common_TypeDef;
+
+/**
+ * @brief Controller Area Network TxMailBox
+ */
+typedef struct
+{
+ __IO uint32_t TIR; /*!< CAN TX mailbox identifier register */
+ __IO uint32_t TDTR; /*!< CAN mailbox data length control and time stamp register */
+ __IO uint32_t TDLR; /*!< CAN mailbox data low register */
+ __IO uint32_t TDHR; /*!< CAN mailbox data high register */
+}CAN_TxMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FIFOMailBox
+ */
+typedef struct
+{
+ __IO uint32_t RIR; /*!< CAN receive FIFO mailbox identifier register */
+ __IO uint32_t RDTR; /*!< CAN receive FIFO mailbox data length control and time stamp register */
+ __IO uint32_t RDLR; /*!< CAN receive FIFO mailbox data low register */
+ __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */
+}CAN_FIFOMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FilterRegister
+ */
+typedef struct
+{
+ __IO uint32_t FR1; /*!< CAN Filter bank register 1 */
+ __IO uint32_t FR2; /*!< CAN Filter bank register 1 */
+}CAN_FilterRegister_TypeDef;
+
+/**
+ * @brief Controller Area Network
+ */
+typedef struct
+{
+ __IO uint32_t MCR; /*!< CAN master control register, Address offset: 0x00 */
+ __IO uint32_t MSR; /*!< CAN master status register, Address offset: 0x04 */
+ __IO uint32_t TSR; /*!< CAN transmit status register, Address offset: 0x08 */
+ __IO uint32_t RF0R; /*!< CAN receive FIFO 0 register, Address offset: 0x0C */
+ __IO uint32_t RF1R; /*!< CAN receive FIFO 1 register, Address offset: 0x10 */
+ __IO uint32_t IER; /*!< CAN interrupt enable register, Address offset: 0x14 */
+ __IO uint32_t ESR; /*!< CAN error status register, Address offset: 0x18 */
+ __IO uint32_t BTR; /*!< CAN bit timing register, Address offset: 0x1C */
+ uint32_t RESERVED0[88]; /*!< Reserved, 0x020 - 0x17F */
+ CAN_TxMailBox_TypeDef sTxMailBox[3]; /*!< CAN Tx MailBox, Address offset: 0x180 - 0x1AC */
+ CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; /*!< CAN FIFO MailBox, Address offset: 0x1B0 - 0x1CC */
+ uint32_t RESERVED1[12]; /*!< Reserved, 0x1D0 - 0x1FF */
+ __IO uint32_t FMR; /*!< CAN filter master register, Address offset: 0x200 */
+ __IO uint32_t FM1R; /*!< CAN filter mode register, Address offset: 0x204 */
+ uint32_t RESERVED2; /*!< Reserved, 0x208 */
+ __IO uint32_t FS1R; /*!< CAN filter scale register, Address offset: 0x20C */
+ uint32_t RESERVED3; /*!< Reserved, 0x210 */
+ __IO uint32_t FFA1R; /*!< CAN filter FIFO assignment register, Address offset: 0x214 */
+ uint32_t RESERVED4; /*!< Reserved, 0x218 */
+ __IO uint32_t FA1R; /*!< CAN filter activation register, Address offset: 0x21C */
+ uint32_t RESERVED5[8]; /*!< Reserved, 0x220-0x23F */
+ CAN_FilterRegister_TypeDef sFilterRegister[28]; /*!< CAN Filter Register, Address offset: 0x240-0x31C */
+}CAN_TypeDef;
+
+/**
+ * @brief HDMI-CEC
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< CEC control register, Address offset:0x00 */
+ __IO uint32_t CFGR; /*!< CEC configuration register, Address offset:0x04 */
+ __IO uint32_t TXDR; /*!< CEC Tx data register , Address offset:0x08 */
+ __IO uint32_t RXDR; /*!< CEC Rx Data Register, Address offset:0x0C */
+ __IO uint32_t ISR; /*!< CEC Interrupt and Status Register, Address offset:0x10 */
+ __IO uint32_t IER; /*!< CEC interrupt enable register, Address offset:0x14 */
+}CEC_TypeDef;
+
+/**
+ * @brief Comparator
+ */
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< Comparator 1 & 2 control Status register, Address offset: 0x00 */
+}COMP1_2_TypeDef;
+
+typedef struct
+{
+ __IO uint16_t CSR; /*!< Comparator control Status register, Address offset: 0x00 */
+}COMP_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+ uint32_t RESERVED2; /*!< Reserved, 0x0C */
+ __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */
+ __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */
+}CRC_TypeDef;
+
+/**
+ * @brief Clock Recovery System
+ */
+typedef struct
+{
+__IO uint32_t CR; /*!< CRS ccontrol register, Address offset: 0x00 */
+__IO uint32_t CFGR; /*!< CRS configuration register, Address offset: 0x04 */
+__IO uint32_t ISR; /*!< CRS interrupt and status register, Address offset: 0x08 */
+__IO uint32_t ICR; /*!< CRS interrupt flag clear register, Address offset: 0x0C */
+}CRS_TypeDef;
+
+/**
+ * @brief Digital to Analog Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */
+ __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */
+ __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */
+ __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */
+ __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */
+ __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */
+ __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */
+ __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */
+ __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */
+ __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */
+ __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */
+ __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */
+ __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */
+ __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */
+}DAC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< DMA channel x configuration register */
+ __IO uint32_t CNDTR; /*!< DMA channel x number of data register */
+ __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */
+ __IO uint32_t CMAR; /*!< DMA channel x memory address register */
+}DMA_Channel_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */
+ __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */
+ uint32_t RESERVED0[40];/*!< Reserved as declared by channel typedef 0x08 - 0xA4*/
+ __IO uint32_t CSELR; /*!< Channel selection register, Address offset: 0xA8 */
+}DMA_TypeDef;
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!<EXTI Interrupt mask register, Address offset: 0x00 */
+ __IO uint32_t EMR; /*!<EXTI Event mask register, Address offset: 0x04 */
+ __IO uint32_t RTSR; /*!<EXTI Rising trigger selection register , Address offset: 0x08 */
+ __IO uint32_t FTSR; /*!<EXTI Falling trigger selection register, Address offset: 0x0C */
+ __IO uint32_t SWIER; /*!<EXTI Software interrupt event register, Address offset: 0x10 */
+ __IO uint32_t PR; /*!<EXTI Pending register, Address offset: 0x14 */
+}EXTI_TypeDef;
+
+/**
+ * @brief FLASH Registers
+ */
+typedef struct
+{
+ __IO uint32_t ACR; /*!<FLASH access control register, Address offset: 0x00 */
+ __IO uint32_t KEYR; /*!<FLASH key register, Address offset: 0x04 */
+ __IO uint32_t OPTKEYR; /*!<FLASH OPT key register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!<FLASH status register, Address offset: 0x0C */
+ __IO uint32_t CR; /*!<FLASH control register, Address offset: 0x10 */
+ __IO uint32_t AR; /*!<FLASH address register, Address offset: 0x14 */
+ __IO uint32_t RESERVED; /*!< Reserved, 0x18 */
+ __IO uint32_t OBR; /*!<FLASH option bytes register, Address offset: 0x1C */
+ __IO uint32_t WRPR; /*!<FLASH option bytes register, Address offset: 0x20 */
+}FLASH_TypeDef;
+
+
+/**
+ * @brief Option Bytes Registers
+ */
+typedef struct
+{
+ __IO uint16_t RDP; /*!< FLASH option byte Read protection, Address offset: 0x00 */
+ __IO uint16_t USER; /*!< FLASH option byte user options, Address offset: 0x02 */
+ __IO uint16_t DATA0; /*!< User data byte 0 (stored in FLASH_OBR[23:16]), Address offset: 0x04 */
+ __IO uint16_t DATA1; /*!< User data byte 1 (stored in FLASH_OBR[31:24]), Address offset: 0x06 */
+ __IO uint16_t WRP0; /*!< FLASH option byte write protection 0, Address offset: 0x08 */
+ __IO uint16_t WRP1; /*!< FLASH option byte write protection 1, Address offset: 0x0A */
+ __IO uint16_t WRP2; /*!< FLASH option byte write protection 2, Address offset: 0x0C */
+ __IO uint16_t WRP3; /*!< FLASH option byte write protection 3, Address offset: 0x0E */
+}OB_TypeDef;
+
+/**
+ * @brief General Purpose I/O
+ */
+
+typedef struct
+{
+ __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */
+ __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */
+ __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */
+ __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */
+ __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */
+ __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */
+ __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x1A */
+ __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */
+ __IO uint32_t AFR[2]; /*!< GPIO alternate function low register, Address offset: 0x20-0x24 */
+ __IO uint32_t BRR; /*!< GPIO bit reset register, Address offset: 0x28 */
+}GPIO_TypeDef;
+
+/**
+ * @brief SysTem Configuration
+ */
+
+typedef struct
+{
+ __IO uint32_t CFGR1; /*!< SYSCFG configuration register 1, Address offset: 0x00 */
+ uint32_t RESERVED; /*!< Reserved, 0x04 */
+ __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration register, Address offset: 0x14-0x08 */
+ __IO uint32_t CFGR2; /*!< SYSCFG configuration register 2, Address offset: 0x18 */
+ uint32_t RESERVED1[25]; /*!< Reserved + COMP, 0x1C */
+ __IO uint32_t IT_LINE_SR[32]; /*!< SYSCFG configuration IT_LINE register, Address offset: 0x80 */
+
+}SYSCFG_TypeDef;
+
+/**
+ * @brief Inter-integrated Circuit Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */
+ __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */
+ __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */
+ __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */
+ __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */
+ __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */
+ __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */
+ __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */
+ __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */
+ __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */
+}I2C_TypeDef;
+
+/**
+ * @brief Independent WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */
+ __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */
+ __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */
+ __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */
+}IWDG_TypeDef;
+
+/**
+ * @brief Power Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< PWR power control register, Address offset: 0x00 */
+ __IO uint32_t CSR; /*!< PWR power control/status register, Address offset: 0x04 */
+}PWR_TypeDef;
+
+/**
+ * @brief Reset and Clock Control
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */
+ __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x04 */
+ __IO uint32_t CIR; /*!< RCC clock interrupt register, Address offset: 0x08 */
+ __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x0C */
+ __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x10 */
+ __IO uint32_t AHBENR; /*!< RCC AHB peripheral clock register, Address offset: 0x14 */
+ __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x18 */
+ __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x1C */
+ __IO uint32_t BDCR; /*!< RCC Backup domain control register, Address offset: 0x20 */
+ __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x24 */
+ __IO uint32_t AHBRSTR; /*!< RCC AHB peripheral reset register, Address offset: 0x28 */
+ __IO uint32_t CFGR2; /*!< RCC clock configuration register 2, Address offset: 0x2C */
+ __IO uint32_t CFGR3; /*!< RCC clock configuration register 3, Address offset: 0x30 */
+ __IO uint32_t CR2; /*!< RCC clock control register 2, Address offset: 0x34 */
+}RCC_TypeDef;
+
+/**
+ * @brief Real-Time Clock
+ */
+
+typedef struct
+{
+ __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */
+ __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */
+ __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */
+ uint32_t RESERVED1; /*!< Reserved, Address offset: 0x18 */
+ __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */
+ uint32_t RESERVED2; /*!< Reserved, Address offset: 0x20 */
+ __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */
+ __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */
+ __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */
+ __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */
+ __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */
+ __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */
+ __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */
+ __IO uint32_t TAFCR; /*!< RTC tamper and alternate function configuration register, Address offset: 0x40 */
+ __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */
+ uint32_t RESERVED3; /*!< Reserved, Address offset: 0x48 */
+ uint32_t RESERVED4; /*!< Reserved, Address offset: 0x4C */
+ __IO uint32_t BKP0R; /*!< RTC backup register 0, Address offset: 0x50 */
+ __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */
+ __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */
+ __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */
+ __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */
+}RTC_TypeDef;
+
+/**
+ * @brief Serial Peripheral Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< SPI Control register 1 (not used in I2S mode), Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */
+ __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */
+ __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */
+ __IO uint32_t RXCRCR; /*!< SPI Rx CRC register (not used in I2S mode), Address offset: 0x14 */
+ __IO uint32_t TXCRCR; /*!< SPI Tx CRC register (not used in I2S mode), Address offset: 0x18 */
+ __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */
+ __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */
+}SPI_TypeDef;
+
+/**
+ * @brief TIM
+ */
+typedef struct
+{
+ __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */
+ __IO uint32_t SMCR; /*!< TIM slave Mode Control register, Address offset: 0x08 */
+ __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */
+ __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */
+ __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */
+ __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */
+ __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */
+ __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */
+ __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */
+ __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */
+ __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */
+ __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */
+ __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */
+ __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */
+ __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */
+ __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */
+ __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */
+ __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */
+ __IO uint32_t DMAR; /*!< TIM DMA address for full transfer register, Address offset: 0x4C */
+ __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */
+}TIM_TypeDef;
+
+/**
+ * @brief Touch Sensing Controller (TSC)
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< TSC control register, Address offset: 0x00 */
+ __IO uint32_t IER; /*!< TSC interrupt enable register, Address offset: 0x04 */
+ __IO uint32_t ICR; /*!< TSC interrupt clear register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< TSC interrupt status register, Address offset: 0x0C */
+ __IO uint32_t IOHCR; /*!< TSC I/O hysteresis control register, Address offset: 0x10 */
+ uint32_t RESERVED1; /*!< Reserved, Address offset: 0x14 */
+ __IO uint32_t IOASCR; /*!< TSC I/O analog switch control register, Address offset: 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, Address offset: 0x1C */
+ __IO uint32_t IOSCR; /*!< TSC I/O sampling control register, Address offset: 0x20 */
+ uint32_t RESERVED3; /*!< Reserved, Address offset: 0x24 */
+ __IO uint32_t IOCCR; /*!< TSC I/O channel control register, Address offset: 0x28 */
+ uint32_t RESERVED4; /*!< Reserved, Address offset: 0x2C */
+ __IO uint32_t IOGCSR; /*!< TSC I/O group control status register, Address offset: 0x30 */
+ __IO uint32_t IOGXCR[8]; /*!< TSC I/O group x counter register, Address offset: 0x34-50 */
+}TSC_TypeDef;
+
+/**
+ * @brief Universal Synchronous Asynchronous Receiver Transmitter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */
+ __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */
+ __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */
+ __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */
+ __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */
+ __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */
+ __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */
+ __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */
+ __IO uint16_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */
+ uint16_t RESERVED1; /*!< Reserved, 0x26 */
+ __IO uint16_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */
+ uint16_t RESERVED2; /*!< Reserved, 0x2A */
+}USART_TypeDef;
+
+/**
+ * @brief Window WATCHDOG
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */
+ __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */
+}WWDG_TypeDef;
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_memory_map
+ * @{
+ */
+
+#define FLASH_BASE ((uint32_t)0x08000000) /*!< FLASH base address in the alias region */
+#define SRAM_BASE ((uint32_t)0x20000000) /*!< SRAM base address in the alias region */
+#define PERIPH_BASE ((uint32_t)0x40000000) /*!< Peripheral base address in the alias region */
+
+/*!< Peripheral memory map */
+#define APBPERIPH_BASE PERIPH_BASE
+#define AHBPERIPH_BASE (PERIPH_BASE + 0x00020000)
+#define AHB2PERIPH_BASE (PERIPH_BASE + 0x08000000)
+
+#define TIM2_BASE (APBPERIPH_BASE + 0x00000000)
+#define TIM3_BASE (APBPERIPH_BASE + 0x00000400)
+#define TIM6_BASE (APBPERIPH_BASE + 0x00001000)
+#define TIM7_BASE (APBPERIPH_BASE + 0x00001400)
+#define TIM14_BASE (APBPERIPH_BASE + 0x00002000)
+#define RTC_BASE (APBPERIPH_BASE + 0x00002800)
+#define WWDG_BASE (APBPERIPH_BASE + 0x00002C00)
+#define IWDG_BASE (APBPERIPH_BASE + 0x00003000)
+#define SPI2_BASE (APBPERIPH_BASE + 0x00003800)
+#define USART2_BASE (APBPERIPH_BASE + 0x00004400)
+#define USART3_BASE (APBPERIPH_BASE + 0x00004800)
+#define USART4_BASE (APBPERIPH_BASE + 0x00004C00)
+#define USART5_BASE (APBPERIPH_BASE + 0x00005000)
+#define I2C1_BASE (APBPERIPH_BASE + 0x00005400)
+#define I2C2_BASE (APBPERIPH_BASE + 0x00005800)
+#define CAN_BASE (APBPERIPH_BASE + 0x00006400)
+#define CRS_BASE (APBPERIPH_BASE + 0x00006C00)
+#define PWR_BASE (APBPERIPH_BASE + 0x00007000)
+#define DAC_BASE (APBPERIPH_BASE + 0x00007400)
+#define CEC_BASE (APBPERIPH_BASE + 0x00007800)
+
+#define SYSCFG_BASE (APBPERIPH_BASE + 0x00010000)
+#define COMP_BASE (APBPERIPH_BASE + 0x0001001C)
+#define EXTI_BASE (APBPERIPH_BASE + 0x00010400)
+#define USART6_BASE (APBPERIPH_BASE + 0x00011400)
+#define USART7_BASE (APBPERIPH_BASE + 0x00011800)
+#define USART8_BASE (APBPERIPH_BASE + 0x00011C00)
+#define ADC1_BASE (APBPERIPH_BASE + 0x00012400)
+#define ADC_BASE (APBPERIPH_BASE + 0x00012708)
+#define TIM1_BASE (APBPERIPH_BASE + 0x00012C00)
+#define SPI1_BASE (APBPERIPH_BASE + 0x00013000)
+#define USART1_BASE (APBPERIPH_BASE + 0x00013800)
+#define TIM15_BASE (APBPERIPH_BASE + 0x00014000)
+#define TIM16_BASE (APBPERIPH_BASE + 0x00014400)
+#define TIM17_BASE (APBPERIPH_BASE + 0x00014800)
+#define DBGMCU_BASE (APBPERIPH_BASE + 0x00015800)
+
+/*!< AHB1 peripherals */
+#define DMA1_BASE (AHBPERIPH_BASE + 0x00000000)
+#define DMA1_Channel1_BASE (DMA1_BASE + 0x00000008)
+#define DMA1_Channel2_BASE (DMA1_BASE + 0x0000001C)
+#define DMA1_Channel3_BASE (DMA1_BASE + 0x00000030)
+#define DMA1_Channel4_BASE (DMA1_BASE + 0x00000044)
+#define DMA1_Channel5_BASE (DMA1_BASE + 0x00000058)
+#define DMA1_Channel6_BASE (DMA1_BASE + 0x0000006C)
+#define DMA1_Channel7_BASE (DMA1_BASE + 0x00000080)
+#define DMA2_BASE (AHBPERIPH_BASE + 0x00000400)
+#define DMA2_Channel1_BASE (DMA2_BASE + 0x00000008)
+#define DMA2_Channel2_BASE (DMA2_BASE + 0x0000001C)
+#define DMA2_Channel3_BASE (DMA2_BASE + 0x00000030)
+#define DMA2_Channel4_BASE (DMA2_BASE + 0x00000044)
+#define DMA2_Channel5_BASE (DMA2_BASE + 0x00000058)
+
+#define RCC_BASE (AHBPERIPH_BASE + 0x00001000)
+#define FLASH_R_BASE (AHBPERIPH_BASE + 0x00002000) /*!< FLASH registers base address */
+#define OB_BASE ((uint32_t)0x1FFFF800) /*!< FLASH Option Bytes base address */
+#define CRC_BASE (AHBPERIPH_BASE + 0x00003000)
+#define TSC_BASE (AHBPERIPH_BASE + 0x00004000)
+
+#define GPIOA_BASE (AHB2PERIPH_BASE + 0x00000000)
+#define GPIOB_BASE (AHB2PERIPH_BASE + 0x00000400)
+#define GPIOC_BASE (AHB2PERIPH_BASE + 0x00000800)
+#define GPIOD_BASE (AHB2PERIPH_BASE + 0x00000C00)
+#define GPIOE_BASE (AHB2PERIPH_BASE + 0x00001000)
+#define GPIOF_BASE (AHB2PERIPH_BASE + 0x00001400)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_declaration
+ * @{
+ */
+
+#define TIM2 ((TIM_TypeDef *) TIM2_BASE)
+#define TIM3 ((TIM_TypeDef *) TIM3_BASE)
+#define TIM6 ((TIM_TypeDef *) TIM6_BASE)
+#define TIM7 ((TIM_TypeDef *) TIM7_BASE)
+#define TIM14 ((TIM_TypeDef *) TIM14_BASE)
+#define RTC ((RTC_TypeDef *) RTC_BASE)
+#define WWDG ((WWDG_TypeDef *) WWDG_BASE)
+#define IWDG ((IWDG_TypeDef *) IWDG_BASE)
+#define SPI2 ((SPI_TypeDef *) SPI2_BASE)
+#define USART2 ((USART_TypeDef *) USART2_BASE)
+#define USART3 ((USART_TypeDef *) USART3_BASE)
+#define USART4 ((USART_TypeDef *) USART4_BASE)
+#define USART5 ((USART_TypeDef *) USART5_BASE)
+#define I2C1 ((I2C_TypeDef *) I2C1_BASE)
+#define I2C2 ((I2C_TypeDef *) I2C2_BASE)
+#define CAN ((CAN_TypeDef *) CAN_BASE)
+#define CRS ((CRS_TypeDef *) CRS_BASE)
+#define PWR ((PWR_TypeDef *) PWR_BASE)
+#define DAC ((DAC_TypeDef *) DAC_BASE)
+#define CEC ((CEC_TypeDef *) CEC_BASE)
+#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE)
+#define COMP ((COMP1_2_TypeDef *) COMP_BASE)
+#define COMP1 ((COMP_TypeDef *) COMP_BASE)
+#define COMP2 ((COMP_TypeDef *) (COMP_BASE + 0x00000002))
+#define EXTI ((EXTI_TypeDef *) EXTI_BASE)
+#define USART6 ((USART_TypeDef *) USART6_BASE)
+#define USART7 ((USART_TypeDef *) USART7_BASE)
+#define USART8 ((USART_TypeDef *) USART8_BASE)
+#define ADC1 ((ADC_TypeDef *) ADC1_BASE)
+#define ADC ((ADC_Common_TypeDef *) ADC_BASE)
+#define TIM1 ((TIM_TypeDef *) TIM1_BASE)
+#define SPI1 ((SPI_TypeDef *) SPI1_BASE)
+#define USART1 ((USART_TypeDef *) USART1_BASE)
+#define TIM15 ((TIM_TypeDef *) TIM15_BASE)
+#define TIM16 ((TIM_TypeDef *) TIM16_BASE)
+#define TIM17 ((TIM_TypeDef *) TIM17_BASE)
+#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE)
+#define DMA1 ((DMA_TypeDef *) DMA1_BASE)
+#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE)
+#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE)
+#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE)
+#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE)
+#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE)
+#define DMA1_Channel6 ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE)
+#define DMA1_Channel7 ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE)
+#define DMA2 ((DMA_TypeDef *) DMA2_BASE)
+#define DMA2_Channel1 ((DMA_Channel_TypeDef *) DMA2_Channel1_BASE)
+#define DMA2_Channel2 ((DMA_Channel_TypeDef *) DMA2_Channel2_BASE)
+#define DMA2_Channel3 ((DMA_Channel_TypeDef *) DMA2_Channel3_BASE)
+#define DMA2_Channel4 ((DMA_Channel_TypeDef *) DMA2_Channel4_BASE)
+#define DMA2_Channel5 ((DMA_Channel_TypeDef *) DMA2_Channel5_BASE)
+#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE)
+#define OB ((OB_TypeDef *) OB_BASE)
+#define RCC ((RCC_TypeDef *) RCC_BASE)
+#define CRC ((CRC_TypeDef *) CRC_BASE)
+#define TSC ((TSC_TypeDef *) TSC_BASE)
+#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE)
+#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE)
+#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE)
+#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE)
+#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE)
+#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_constants
+ * @{
+ */
+
+ /** @addtogroup Peripheral_Registers_Bits_Definition
+ * @{
+ */
+
+/******************************************************************************/
+/* Peripheral Registers Bits Definition */
+/******************************************************************************/
+/******************************************************************************/
+/* */
+/* Analog to Digital Converter (ADC) */
+/* */
+/******************************************************************************/
+/******************** Bits definition for ADC_ISR register ******************/
+#define ADC_ISR_AWD ((uint32_t)0x00000080) /*!< Analog watchdog flag */
+#define ADC_ISR_OVR ((uint32_t)0x00000010) /*!< Overrun flag */
+#define ADC_ISR_EOSEQ ((uint32_t)0x00000008) /*!< End of Sequence flag */
+#define ADC_ISR_EOC ((uint32_t)0x00000004) /*!< End of Conversion */
+#define ADC_ISR_EOSMP ((uint32_t)0x00000002) /*!< End of sampling flag */
+#define ADC_ISR_ADRDY ((uint32_t)0x00000001) /*!< ADC Ready */
+
+/* Old EOSEQ bit definition, maintained for legacy purpose */
+#define ADC_ISR_EOS ADC_ISR_EOSEQ
+
+/******************** Bits definition for ADC_IER register ******************/
+#define ADC_IER_AWDIE ((uint32_t)0x00000080) /*!< Analog Watchdog interrupt enable */
+#define ADC_IER_OVRIE ((uint32_t)0x00000010) /*!< Overrun interrupt enable */
+#define ADC_IER_EOSEQIE ((uint32_t)0x00000008) /*!< End of Sequence of conversion interrupt enable */
+#define ADC_IER_EOCIE ((uint32_t)0x00000004) /*!< End of Conversion interrupt enable */
+#define ADC_IER_EOSMPIE ((uint32_t)0x00000002) /*!< End of sampling interrupt enable */
+#define ADC_IER_ADRDYIE ((uint32_t)0x00000001) /*!< ADC Ready interrupt enable */
+
+/* Old EOSEQIE bit definition, maintained for legacy purpose */
+#define ADC_IER_EOSIE ADC_IER_EOSEQIE
+
+/******************** Bits definition for ADC_CR register *******************/
+#define ADC_CR_ADCAL ((uint32_t)0x80000000) /*!< ADC calibration */
+#define ADC_CR_ADSTP ((uint32_t)0x00000010) /*!< ADC stop of conversion command */
+#define ADC_CR_ADSTART ((uint32_t)0x00000004) /*!< ADC start of conversion */
+#define ADC_CR_ADDIS ((uint32_t)0x00000002) /*!< ADC disable command */
+#define ADC_CR_ADEN ((uint32_t)0x00000001) /*!< ADC enable control */
+
+/******************* Bits definition for ADC_CFGR1 register *****************/
+#define ADC_CFGR1_AWDCH ((uint32_t)0x7C000000) /*!< AWDCH[4:0] bits (Analog watchdog channel select bits) */
+#define ADC_CFGR1_AWDCH_0 ((uint32_t)0x04000000) /*!< Bit 0 */
+#define ADC_CFGR1_AWDCH_1 ((uint32_t)0x08000000) /*!< Bit 1 */
+#define ADC_CFGR1_AWDCH_2 ((uint32_t)0x10000000) /*!< Bit 2 */
+#define ADC_CFGR1_AWDCH_3 ((uint32_t)0x20000000) /*!< Bit 3 */
+#define ADC_CFGR1_AWDCH_4 ((uint32_t)0x40000000) /*!< Bit 4 */
+#define ADC_CFGR1_AWDEN ((uint32_t)0x00800000) /*!< Analog watchdog enable on regular channels */
+#define ADC_CFGR1_AWDSGL ((uint32_t)0x00400000) /*!< Enable the watchdog on a single channel or on all channels */
+#define ADC_CFGR1_DISCEN ((uint32_t)0x00010000) /*!< Discontinuous mode on regular channels */
+#define ADC_CFGR1_AUTOFF ((uint32_t)0x00008000) /*!< ADC auto power off */
+#define ADC_CFGR1_WAIT ((uint32_t)0x00004000) /*!< ADC wait conversion mode */
+#define ADC_CFGR1_CONT ((uint32_t)0x00002000) /*!< Continuous Conversion */
+#define ADC_CFGR1_OVRMOD ((uint32_t)0x00001000) /*!< Overrun mode */
+#define ADC_CFGR1_EXTEN ((uint32_t)0x00000C00) /*!< EXTEN[1:0] bits (External Trigger Conversion mode for regular channels) */
+#define ADC_CFGR1_EXTEN_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define ADC_CFGR1_EXTEN_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define ADC_CFGR1_EXTSEL ((uint32_t)0x000001C0) /*!< EXTSEL[2:0] bits (External Event Select for regular group) */
+#define ADC_CFGR1_EXTSEL_0 ((uint32_t)0x00000040) /*!< Bit 0 */
+#define ADC_CFGR1_EXTSEL_1 ((uint32_t)0x00000080) /*!< Bit 1 */
+#define ADC_CFGR1_EXTSEL_2 ((uint32_t)0x00000100) /*!< Bit 2 */
+#define ADC_CFGR1_ALIGN ((uint32_t)0x00000020) /*!< Data Alignment */
+#define ADC_CFGR1_RES ((uint32_t)0x00000018) /*!< RES[1:0] bits (Resolution) */
+#define ADC_CFGR1_RES_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define ADC_CFGR1_RES_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define ADC_CFGR1_SCANDIR ((uint32_t)0x00000004) /*!< Sequence scan direction */
+#define ADC_CFGR1_DMACFG ((uint32_t)0x00000002) /*!< Direct memory access configuration */
+#define ADC_CFGR1_DMAEN ((uint32_t)0x00000001) /*!< Direct memory access enable */
+
+/* Old WAIT bit definition, maintained for legacy purpose */
+#define ADC_CFGR1_AUTDLY ADC_CFGR1_WAIT
+
+/******************* Bits definition for ADC_CFGR2 register *****************/
+#define ADC_CFGR2_CKMODE ((uint32_t)0xC0000000) /*!< ADC clock mode */
+#define ADC_CFGR2_CKMODE_1 ((uint32_t)0x80000000) /*!< ADC clocked by PCLK div4 */
+#define ADC_CFGR2_CKMODE_0 ((uint32_t)0x40000000) /*!< ADC clocked by PCLK div2 */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_CFGR2_JITOFFDIV4 ADC_CFGR2_CKMODE_1 /*!< ADC clocked by PCLK div4 */
+#define ADC_CFGR2_JITOFFDIV2 ADC_CFGR2_CKMODE_0 /*!< ADC clocked by PCLK div2 */
+
+/****************** Bit definition for ADC_SMPR register ********************/
+#define ADC_SMPR_SMP ((uint32_t)0x00000007) /*!< SMP[2:0] bits (Sampling time selection) */
+#define ADC_SMPR_SMP_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define ADC_SMPR_SMP_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define ADC_SMPR_SMP_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_SMPR1_SMPR ADC_SMPR_SMP /*!< SMP[2:0] bits (Sampling time selection) */
+#define ADC_SMPR1_SMPR_0 ADC_SMPR_SMP_0 /*!< Bit 0 */
+#define ADC_SMPR1_SMPR_1 ADC_SMPR_SMP_1 /*!< Bit 1 */
+#define ADC_SMPR1_SMPR_2 ADC_SMPR_SMP_2 /*!< Bit 2 */
+
+/******************* Bit definition for ADC_TR register ********************/
+#define ADC_TR_HT ((uint32_t)0x0FFF0000) /*!< Analog watchdog high threshold */
+#define ADC_TR_LT ((uint32_t)0x00000FFF) /*!< Analog watchdog low threshold */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_HTR_HT ADC_TR_HT /*!< Analog watchdog high threshold */
+#define ADC_LTR_LT ADC_TR_LT /*!< Analog watchdog low threshold */
+
+/****************** Bit definition for ADC_CHSELR register ******************/
+#define ADC_CHSELR_CHSEL18 ((uint32_t)0x00040000) /*!< Channel 18 selection */
+#define ADC_CHSELR_CHSEL17 ((uint32_t)0x00020000) /*!< Channel 17 selection */
+#define ADC_CHSELR_CHSEL16 ((uint32_t)0x00010000) /*!< Channel 16 selection */
+#define ADC_CHSELR_CHSEL15 ((uint32_t)0x00008000) /*!< Channel 15 selection */
+#define ADC_CHSELR_CHSEL14 ((uint32_t)0x00004000) /*!< Channel 14 selection */
+#define ADC_CHSELR_CHSEL13 ((uint32_t)0x00002000) /*!< Channel 13 selection */
+#define ADC_CHSELR_CHSEL12 ((uint32_t)0x00001000) /*!< Channel 12 selection */
+#define ADC_CHSELR_CHSEL11 ((uint32_t)0x00000800) /*!< Channel 11 selection */
+#define ADC_CHSELR_CHSEL10 ((uint32_t)0x00000400) /*!< Channel 10 selection */
+#define ADC_CHSELR_CHSEL9 ((uint32_t)0x00000200) /*!< Channel 9 selection */
+#define ADC_CHSELR_CHSEL8 ((uint32_t)0x00000100) /*!< Channel 8 selection */
+#define ADC_CHSELR_CHSEL7 ((uint32_t)0x00000080) /*!< Channel 7 selection */
+#define ADC_CHSELR_CHSEL6 ((uint32_t)0x00000040) /*!< Channel 6 selection */
+#define ADC_CHSELR_CHSEL5 ((uint32_t)0x00000020) /*!< Channel 5 selection */
+#define ADC_CHSELR_CHSEL4 ((uint32_t)0x00000010) /*!< Channel 4 selection */
+#define ADC_CHSELR_CHSEL3 ((uint32_t)0x00000008) /*!< Channel 3 selection */
+#define ADC_CHSELR_CHSEL2 ((uint32_t)0x00000004) /*!< Channel 2 selection */
+#define ADC_CHSELR_CHSEL1 ((uint32_t)0x00000002) /*!< Channel 1 selection */
+#define ADC_CHSELR_CHSEL0 ((uint32_t)0x00000001) /*!< Channel 0 selection */
+
+/******************** Bit definition for ADC_DR register ********************/
+#define ADC_DR_DATA ((uint32_t)0x0000FFFF) /*!< Regular data */
+
+/******************* Bit definition for ADC_CCR register ********************/
+#define ADC_CCR_VBATEN ((uint32_t)0x01000000) /*!< Voltage battery enable */
+#define ADC_CCR_TSEN ((uint32_t)0x00800000) /*!< Tempurature sensore enable */
+#define ADC_CCR_VREFEN ((uint32_t)0x00400000) /*!< Vrefint enable */
+
+/******************************************************************************/
+/* */
+/* Controller Area Network (CAN ) */
+/* */
+/******************************************************************************/
+/*!<CAN control and status registers */
+/******************* Bit definition for CAN_MCR register ********************/
+#define CAN_MCR_INRQ ((uint32_t)0x00000001) /*!<Initialization Request */
+#define CAN_MCR_SLEEP ((uint32_t)0x00000002) /*!<Sleep Mode Request */
+#define CAN_MCR_TXFP ((uint32_t)0x00000004) /*!<Transmit FIFO Priority */
+#define CAN_MCR_RFLM ((uint32_t)0x00000008) /*!<Receive FIFO Locked Mode */
+#define CAN_MCR_NART ((uint32_t)0x00000010) /*!<No Automatic Retransmission */
+#define CAN_MCR_AWUM ((uint32_t)0x00000020) /*!<Automatic Wakeup Mode */
+#define CAN_MCR_ABOM ((uint32_t)0x00000040) /*!<Automatic Bus-Off Management */
+#define CAN_MCR_TTCM ((uint32_t)0x00000080) /*!<Time Triggered Communication Mode */
+#define CAN_MCR_RESET ((uint32_t)0x00008000) /*!<bxCAN software master reset */
+
+/******************* Bit definition for CAN_MSR register ********************/
+#define CAN_MSR_INAK ((uint32_t)0x00000001) /*!<Initialization Acknowledge */
+#define CAN_MSR_SLAK ((uint32_t)0x00000002) /*!<Sleep Acknowledge */
+#define CAN_MSR_ERRI ((uint32_t)0x00000004) /*!<Error Interrupt */
+#define CAN_MSR_WKUI ((uint32_t)0x00000008) /*!<Wakeup Interrupt */
+#define CAN_MSR_SLAKI ((uint32_t)0x00000010) /*!<Sleep Acknowledge Interrupt */
+#define CAN_MSR_TXM ((uint32_t)0x00000100) /*!<Transmit Mode */
+#define CAN_MSR_RXM ((uint32_t)0x00000200) /*!<Receive Mode */
+#define CAN_MSR_SAMP ((uint32_t)0x00000400) /*!<Last Sample Point */
+#define CAN_MSR_RX ((uint32_t)0x00000800) /*!<CAN Rx Signal */
+
+/******************* Bit definition for CAN_TSR register ********************/
+#define CAN_TSR_RQCP0 ((uint32_t)0x00000001) /*!<Request Completed Mailbox0 */
+#define CAN_TSR_TXOK0 ((uint32_t)0x00000002) /*!<Transmission OK of Mailbox0 */
+#define CAN_TSR_ALST0 ((uint32_t)0x00000004) /*!<Arbitration Lost for Mailbox0 */
+#define CAN_TSR_TERR0 ((uint32_t)0x00000008) /*!<Transmission Error of Mailbox0 */
+#define CAN_TSR_ABRQ0 ((uint32_t)0x00000080) /*!<Abort Request for Mailbox0 */
+#define CAN_TSR_RQCP1 ((uint32_t)0x00000100) /*!<Request Completed Mailbox1 */
+#define CAN_TSR_TXOK1 ((uint32_t)0x00000200) /*!<Transmission OK of Mailbox1 */
+#define CAN_TSR_ALST1 ((uint32_t)0x00000400) /*!<Arbitration Lost for Mailbox1 */
+#define CAN_TSR_TERR1 ((uint32_t)0x00000800) /*!<Transmission Error of Mailbox1 */
+#define CAN_TSR_ABRQ1 ((uint32_t)0x00008000) /*!<Abort Request for Mailbox 1 */
+#define CAN_TSR_RQCP2 ((uint32_t)0x00010000) /*!<Request Completed Mailbox2 */
+#define CAN_TSR_TXOK2 ((uint32_t)0x00020000) /*!<Transmission OK of Mailbox 2 */
+#define CAN_TSR_ALST2 ((uint32_t)0x00040000) /*!<Arbitration Lost for mailbox 2 */
+#define CAN_TSR_TERR2 ((uint32_t)0x00080000) /*!<Transmission Error of Mailbox 2 */
+#define CAN_TSR_ABRQ2 ((uint32_t)0x00800000) /*!<Abort Request for Mailbox 2 */
+#define CAN_TSR_CODE ((uint32_t)0x03000000) /*!<Mailbox Code */
+
+#define CAN_TSR_TME ((uint32_t)0x1C000000) /*!<TME[2:0] bits */
+#define CAN_TSR_TME0 ((uint32_t)0x04000000) /*!<Transmit Mailbox 0 Empty */
+#define CAN_TSR_TME1 ((uint32_t)0x08000000) /*!<Transmit Mailbox 1 Empty */
+#define CAN_TSR_TME2 ((uint32_t)0x10000000) /*!<Transmit Mailbox 2 Empty */
+
+#define CAN_TSR_LOW ((uint32_t)0xE0000000) /*!<LOW[2:0] bits */
+#define CAN_TSR_LOW0 ((uint32_t)0x20000000) /*!<Lowest Priority Flag for Mailbox 0 */
+#define CAN_TSR_LOW1 ((uint32_t)0x40000000) /*!<Lowest Priority Flag for Mailbox 1 */
+#define CAN_TSR_LOW2 ((uint32_t)0x80000000) /*!<Lowest Priority Flag for Mailbox 2 */
+
+/******************* Bit definition for CAN_RF0R register *******************/
+#define CAN_RF0R_FMP0 ((uint32_t)0x00000003) /*!<FIFO 0 Message Pending */
+#define CAN_RF0R_FULL0 ((uint32_t)0x00000008) /*!<FIFO 0 Full */
+#define CAN_RF0R_FOVR0 ((uint32_t)0x00000010) /*!<FIFO 0 Overrun */
+#define CAN_RF0R_RFOM0 ((uint32_t)0x00000020) /*!<Release FIFO 0 Output Mailbox */
+
+/******************* Bit definition for CAN_RF1R register *******************/
+#define CAN_RF1R_FMP1 ((uint32_t)0x00000003) /*!<FIFO 1 Message Pending */
+#define CAN_RF1R_FULL1 ((uint32_t)0x00000008) /*!<FIFO 1 Full */
+#define CAN_RF1R_FOVR1 ((uint32_t)0x00000010) /*!<FIFO 1 Overrun */
+#define CAN_RF1R_RFOM1 ((uint32_t)0x00000020) /*!<Release FIFO 1 Output Mailbox */
+
+/******************** Bit definition for CAN_IER register *******************/
+#define CAN_IER_TMEIE ((uint32_t)0x00000001) /*!<Transmit Mailbox Empty Interrupt Enable */
+#define CAN_IER_FMPIE0 ((uint32_t)0x00000002) /*!<FIFO Message Pending Interrupt Enable */
+#define CAN_IER_FFIE0 ((uint32_t)0x00000004) /*!<FIFO Full Interrupt Enable */
+#define CAN_IER_FOVIE0 ((uint32_t)0x00000008) /*!<FIFO Overrun Interrupt Enable */
+#define CAN_IER_FMPIE1 ((uint32_t)0x00000010) /*!<FIFO Message Pending Interrupt Enable */
+#define CAN_IER_FFIE1 ((uint32_t)0x00000020) /*!<FIFO Full Interrupt Enable */
+#define CAN_IER_FOVIE1 ((uint32_t)0x00000040) /*!<FIFO Overrun Interrupt Enable */
+#define CAN_IER_EWGIE ((uint32_t)0x00000100) /*!<Error Warning Interrupt Enable */
+#define CAN_IER_EPVIE ((uint32_t)0x00000200) /*!<Error Passive Interrupt Enable */
+#define CAN_IER_BOFIE ((uint32_t)0x00000400) /*!<Bus-Off Interrupt Enable */
+#define CAN_IER_LECIE ((uint32_t)0x00000800) /*!<Last Error Code Interrupt Enable */
+#define CAN_IER_ERRIE ((uint32_t)0x00008000) /*!<Error Interrupt Enable */
+#define CAN_IER_WKUIE ((uint32_t)0x00010000) /*!<Wakeup Interrupt Enable */
+#define CAN_IER_SLKIE ((uint32_t)0x00020000) /*!<Sleep Interrupt Enable */
+
+/******************** Bit definition for CAN_ESR register *******************/
+#define CAN_ESR_EWGF ((uint32_t)0x00000001) /*!<Error Warning Flag */
+#define CAN_ESR_EPVF ((uint32_t)0x00000002) /*!<Error Passive Flag */
+#define CAN_ESR_BOFF ((uint32_t)0x00000004) /*!<Bus-Off Flag */
+
+#define CAN_ESR_LEC ((uint32_t)0x00000070) /*!<LEC[2:0] bits (Last Error Code) */
+#define CAN_ESR_LEC_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define CAN_ESR_LEC_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define CAN_ESR_LEC_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define CAN_ESR_TEC ((uint32_t)0x00FF0000) /*!<Least significant byte of the 9-bit Transmit Error Counter */
+#define CAN_ESR_REC ((uint32_t)0xFF000000) /*!<Receive Error Counter */
+
+/******************* Bit definition for CAN_BTR register ********************/
+#define CAN_BTR_BRP ((uint32_t)0x000003FF) /*!<Baud Rate Prescaler */
+#define CAN_BTR_TS1 ((uint32_t)0x000F0000) /*!<Time Segment 1 */
+#define CAN_BTR_TS1_0 ((uint32_t)0x00010000) /*!<Time Segment 1 (Bit 0) */
+#define CAN_BTR_TS1_1 ((uint32_t)0x00020000) /*!<Time Segment 1 (Bit 1) */
+#define CAN_BTR_TS1_2 ((uint32_t)0x00040000) /*!<Time Segment 1 (Bit 2) */
+#define CAN_BTR_TS1_3 ((uint32_t)0x00080000) /*!<Time Segment 1 (Bit 3) */
+#define CAN_BTR_TS2 ((uint32_t)0x00700000) /*!<Time Segment 2 */
+#define CAN_BTR_TS2_0 ((uint32_t)0x00100000) /*!<Time Segment 2 (Bit 0) */
+#define CAN_BTR_TS2_1 ((uint32_t)0x00200000) /*!<Time Segment 2 (Bit 1) */
+#define CAN_BTR_TS2_2 ((uint32_t)0x00400000) /*!<Time Segment 2 (Bit 2) */
+#define CAN_BTR_SJW ((uint32_t)0x03000000) /*!<Resynchronization Jump Width */
+#define CAN_BTR_SJW_0 ((uint32_t)0x01000000) /*!<Resynchronization Jump Width (Bit 0) */
+#define CAN_BTR_SJW_1 ((uint32_t)0x02000000) /*!<Resynchronization Jump Width (Bit 1) */
+#define CAN_BTR_LBKM ((uint32_t)0x40000000) /*!<Loop Back Mode (Debug) */
+#define CAN_BTR_SILM ((uint32_t)0x80000000) /*!<Silent Mode */
+
+/*!<Mailbox registers */
+/****************** Bit definition for CAN_TI0R register ********************/
+#define CAN_TI0R_TXRQ ((uint32_t)0x00000001) /*!<Transmit Mailbox Request */
+#define CAN_TI0R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_TI0R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_TI0R_EXID ((uint32_t)0x001FFFF8) /*!<Extended Identifier */
+#define CAN_TI0R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/****************** Bit definition for CAN_TDT0R register *******************/
+#define CAN_TDT0R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_TDT0R_TGT ((uint32_t)0x00000100) /*!<Transmit Global Time */
+#define CAN_TDT0R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/****************** Bit definition for CAN_TDL0R register *******************/
+#define CAN_TDL0R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_TDL0R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_TDL0R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_TDL0R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/****************** Bit definition for CAN_TDH0R register *******************/
+#define CAN_TDH0R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_TDH0R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_TDH0R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_TDH0R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/******************* Bit definition for CAN_TI1R register *******************/
+#define CAN_TI1R_TXRQ ((uint32_t)0x00000001) /*!<Transmit Mailbox Request */
+#define CAN_TI1R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_TI1R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_TI1R_EXID ((uint32_t)0x001FFFF8) /*!<Extended Identifier */
+#define CAN_TI1R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/******************* Bit definition for CAN_TDT1R register ******************/
+#define CAN_TDT1R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_TDT1R_TGT ((uint32_t)0x00000100) /*!<Transmit Global Time */
+#define CAN_TDT1R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/******************* Bit definition for CAN_TDL1R register ******************/
+#define CAN_TDL1R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_TDL1R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_TDL1R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_TDL1R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/******************* Bit definition for CAN_TDH1R register ******************/
+#define CAN_TDH1R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_TDH1R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_TDH1R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_TDH1R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/******************* Bit definition for CAN_TI2R register *******************/
+#define CAN_TI2R_TXRQ ((uint32_t)0x00000001) /*!<Transmit Mailbox Request */
+#define CAN_TI2R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_TI2R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_TI2R_EXID ((uint32_t)0x001FFFF8) /*!<Extended identifier */
+#define CAN_TI2R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/******************* Bit definition for CAN_TDT2R register ******************/
+#define CAN_TDT2R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_TDT2R_TGT ((uint32_t)0x00000100) /*!<Transmit Global Time */
+#define CAN_TDT2R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/******************* Bit definition for CAN_TDL2R register ******************/
+#define CAN_TDL2R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_TDL2R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_TDL2R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_TDL2R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/******************* Bit definition for CAN_TDH2R register ******************/
+#define CAN_TDH2R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_TDH2R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_TDH2R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_TDH2R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/******************* Bit definition for CAN_RI0R register *******************/
+#define CAN_RI0R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_RI0R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_RI0R_EXID ((uint32_t)0x001FFFF8) /*!<Extended Identifier */
+#define CAN_RI0R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/******************* Bit definition for CAN_RDT0R register ******************/
+#define CAN_RDT0R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_RDT0R_FMI ((uint32_t)0x0000FF00) /*!<Filter Match Index */
+#define CAN_RDT0R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/******************* Bit definition for CAN_RDL0R register ******************/
+#define CAN_RDL0R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_RDL0R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_RDL0R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_RDL0R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/******************* Bit definition for CAN_RDH0R register ******************/
+#define CAN_RDH0R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_RDH0R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_RDH0R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_RDH0R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/******************* Bit definition for CAN_RI1R register *******************/
+#define CAN_RI1R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_RI1R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_RI1R_EXID ((uint32_t)0x001FFFF8) /*!<Extended identifier */
+#define CAN_RI1R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/******************* Bit definition for CAN_RDT1R register ******************/
+#define CAN_RDT1R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_RDT1R_FMI ((uint32_t)0x0000FF00) /*!<Filter Match Index */
+#define CAN_RDT1R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/******************* Bit definition for CAN_RDL1R register ******************/
+#define CAN_RDL1R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_RDL1R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_RDL1R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_RDL1R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/******************* Bit definition for CAN_RDH1R register ******************/
+#define CAN_RDH1R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_RDH1R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_RDH1R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_RDH1R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/*!<CAN filter registers */
+/******************* Bit definition for CAN_FMR register ********************/
+#define CAN_FMR_FINIT ((uint32_t)0x00000001) /*!<Filter Init Mode */
+
+/******************* Bit definition for CAN_FM1R register *******************/
+#define CAN_FM1R_FBM ((uint32_t)0x00003FFF) /*!<Filter Mode */
+#define CAN_FM1R_FBM0 ((uint32_t)0x00000001) /*!<Filter Init Mode bit 0 */
+#define CAN_FM1R_FBM1 ((uint32_t)0x00000002) /*!<Filter Init Mode bit 1 */
+#define CAN_FM1R_FBM2 ((uint32_t)0x00000004) /*!<Filter Init Mode bit 2 */
+#define CAN_FM1R_FBM3 ((uint32_t)0x00000008) /*!<Filter Init Mode bit 3 */
+#define CAN_FM1R_FBM4 ((uint32_t)0x00000010) /*!<Filter Init Mode bit 4 */
+#define CAN_FM1R_FBM5 ((uint32_t)0x00000020) /*!<Filter Init Mode bit 5 */
+#define CAN_FM1R_FBM6 ((uint32_t)0x00000040) /*!<Filter Init Mode bit 6 */
+#define CAN_FM1R_FBM7 ((uint32_t)0x00000080) /*!<Filter Init Mode bit 7 */
+#define CAN_FM1R_FBM8 ((uint32_t)0x00000100) /*!<Filter Init Mode bit 8 */
+#define CAN_FM1R_FBM9 ((uint32_t)0x00000200) /*!<Filter Init Mode bit 9 */
+#define CAN_FM1R_FBM10 ((uint32_t)0x00000400) /*!<Filter Init Mode bit 10 */
+#define CAN_FM1R_FBM11 ((uint32_t)0x00000800) /*!<Filter Init Mode bit 11 */
+#define CAN_FM1R_FBM12 ((uint32_t)0x00001000) /*!<Filter Init Mode bit 12 */
+#define CAN_FM1R_FBM13 ((uint32_t)0x00002000) /*!<Filter Init Mode bit 13 */
+
+/******************* Bit definition for CAN_FS1R register *******************/
+#define CAN_FS1R_FSC ((uint32_t)0x00003FFF) /*!<Filter Scale Configuration */
+#define CAN_FS1R_FSC0 ((uint32_t)0x00000001) /*!<Filter Scale Configuration bit 0 */
+#define CAN_FS1R_FSC1 ((uint32_t)0x00000002) /*!<Filter Scale Configuration bit 1 */
+#define CAN_FS1R_FSC2 ((uint32_t)0x00000004) /*!<Filter Scale Configuration bit 2 */
+#define CAN_FS1R_FSC3 ((uint32_t)0x00000008) /*!<Filter Scale Configuration bit 3 */
+#define CAN_FS1R_FSC4 ((uint32_t)0x00000010) /*!<Filter Scale Configuration bit 4 */
+#define CAN_FS1R_FSC5 ((uint32_t)0x00000020) /*!<Filter Scale Configuration bit 5 */
+#define CAN_FS1R_FSC6 ((uint32_t)0x00000040) /*!<Filter Scale Configuration bit 6 */
+#define CAN_FS1R_FSC7 ((uint32_t)0x00000080) /*!<Filter Scale Configuration bit 7 */
+#define CAN_FS1R_FSC8 ((uint32_t)0x00000100) /*!<Filter Scale Configuration bit 8 */
+#define CAN_FS1R_FSC9 ((uint32_t)0x00000200) /*!<Filter Scale Configuration bit 9 */
+#define CAN_FS1R_FSC10 ((uint32_t)0x00000400) /*!<Filter Scale Configuration bit 10 */
+#define CAN_FS1R_FSC11 ((uint32_t)0x00000800) /*!<Filter Scale Configuration bit 11 */
+#define CAN_FS1R_FSC12 ((uint32_t)0x00001000) /*!<Filter Scale Configuration bit 12 */
+#define CAN_FS1R_FSC13 ((uint32_t)0x00002000) /*!<Filter Scale Configuration bit 13 */
+
+/****************** Bit definition for CAN_FFA1R register *******************/
+#define CAN_FFA1R_FFA ((uint32_t)0x00003FFF) /*!<Filter FIFO Assignment */
+#define CAN_FFA1R_FFA0 ((uint32_t)0x00000001) /*!<Filter FIFO Assignment for Filter 0 */
+#define CAN_FFA1R_FFA1 ((uint32_t)0x00000002) /*!<Filter FIFO Assignment for Filter 1 */
+#define CAN_FFA1R_FFA2 ((uint32_t)0x00000004) /*!<Filter FIFO Assignment for Filter 2 */
+#define CAN_FFA1R_FFA3 ((uint32_t)0x00000008) /*!<Filter FIFO Assignment for Filter 3 */
+#define CAN_FFA1R_FFA4 ((uint32_t)0x00000010) /*!<Filter FIFO Assignment for Filter 4 */
+#define CAN_FFA1R_FFA5 ((uint32_t)0x00000020) /*!<Filter FIFO Assignment for Filter 5 */
+#define CAN_FFA1R_FFA6 ((uint32_t)0x00000040) /*!<Filter FIFO Assignment for Filter 6 */
+#define CAN_FFA1R_FFA7 ((uint32_t)0x00000080) /*!<Filter FIFO Assignment for Filter 7 */
+#define CAN_FFA1R_FFA8 ((uint32_t)0x00000100) /*!<Filter FIFO Assignment for Filter 8 */
+#define CAN_FFA1R_FFA9 ((uint32_t)0x00000200) /*!<Filter FIFO Assignment for Filter 9 */
+#define CAN_FFA1R_FFA10 ((uint32_t)0x00000400) /*!<Filter FIFO Assignment for Filter 10 */
+#define CAN_FFA1R_FFA11 ((uint32_t)0x00000800) /*!<Filter FIFO Assignment for Filter 11 */
+#define CAN_FFA1R_FFA12 ((uint32_t)0x00001000) /*!<Filter FIFO Assignment for Filter 12 */
+#define CAN_FFA1R_FFA13 ((uint32_t)0x00002000) /*!<Filter FIFO Assignment for Filter 13 */
+
+/******************* Bit definition for CAN_FA1R register *******************/
+#define CAN_FA1R_FACT ((uint32_t)0x00003FFF) /*!<Filter Active */
+#define CAN_FA1R_FACT0 ((uint32_t)0x00000001) /*!<Filter 0 Active */
+#define CAN_FA1R_FACT1 ((uint32_t)0x00000002) /*!<Filter 1 Active */
+#define CAN_FA1R_FACT2 ((uint32_t)0x00000004) /*!<Filter 2 Active */
+#define CAN_FA1R_FACT3 ((uint32_t)0x00000008) /*!<Filter 3 Active */
+#define CAN_FA1R_FACT4 ((uint32_t)0x00000010) /*!<Filter 4 Active */
+#define CAN_FA1R_FACT5 ((uint32_t)0x00000020) /*!<Filter 5 Active */
+#define CAN_FA1R_FACT6 ((uint32_t)0x00000040) /*!<Filter 6 Active */
+#define CAN_FA1R_FACT7 ((uint32_t)0x00000080) /*!<Filter 7 Active */
+#define CAN_FA1R_FACT8 ((uint32_t)0x00000100) /*!<Filter 8 Active */
+#define CAN_FA1R_FACT9 ((uint32_t)0x00000200) /*!<Filter 9 Active */
+#define CAN_FA1R_FACT10 ((uint32_t)0x00000400) /*!<Filter 10 Active */
+#define CAN_FA1R_FACT11 ((uint32_t)0x00000800) /*!<Filter 11 Active */
+#define CAN_FA1R_FACT12 ((uint32_t)0x00001000) /*!<Filter 12 Active */
+#define CAN_FA1R_FACT13 ((uint32_t)0x00002000) /*!<Filter 13 Active */
+
+/******************* Bit definition for CAN_F0R1 register *******************/
+#define CAN_F0R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F0R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F0R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F0R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F0R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F0R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F0R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F0R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F0R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F0R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F0R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F0R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F0R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F0R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F0R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F0R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F0R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F0R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F0R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F0R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F0R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F0R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F0R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F0R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F0R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F0R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F0R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F0R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F0R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F0R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F0R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F0R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F1R1 register *******************/
+#define CAN_F1R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F1R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F1R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F1R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F1R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F1R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F1R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F1R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F1R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F1R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F1R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F1R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F1R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F1R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F1R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F1R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F1R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F1R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F1R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F1R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F1R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F1R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F1R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F1R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F1R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F1R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F1R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F1R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F1R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F1R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F1R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F1R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F2R1 register *******************/
+#define CAN_F2R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F2R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F2R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F2R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F2R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F2R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F2R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F2R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F2R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F2R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F2R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F2R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F2R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F2R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F2R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F2R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F2R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F2R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F2R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F2R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F2R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F2R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F2R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F2R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F2R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F2R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F2R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F2R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F2R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F2R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F2R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F2R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F3R1 register *******************/
+#define CAN_F3R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F3R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F3R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F3R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F3R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F3R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F3R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F3R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F3R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F3R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F3R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F3R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F3R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F3R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F3R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F3R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F3R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F3R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F3R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F3R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F3R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F3R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F3R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F3R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F3R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F3R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F3R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F3R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F3R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F3R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F3R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F3R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F4R1 register *******************/
+#define CAN_F4R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F4R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F4R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F4R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F4R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F4R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F4R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F4R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F4R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F4R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F4R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F4R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F4R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F4R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F4R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F4R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F4R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F4R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F4R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F4R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F4R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F4R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F4R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F4R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F4R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F4R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F4R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F4R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F4R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F4R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F4R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F4R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F5R1 register *******************/
+#define CAN_F5R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F5R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F5R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F5R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F5R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F5R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F5R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F5R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F5R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F5R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F5R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F5R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F5R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F5R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F5R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F5R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F5R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F5R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F5R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F5R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F5R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F5R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F5R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F5R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F5R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F5R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F5R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F5R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F5R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F5R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F5R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F5R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F6R1 register *******************/
+#define CAN_F6R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F6R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F6R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F6R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F6R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F6R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F6R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F6R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F6R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F6R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F6R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F6R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F6R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F6R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F6R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F6R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F6R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F6R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F6R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F6R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F6R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F6R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F6R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F6R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F6R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F6R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F6R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F6R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F6R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F6R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F6R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F6R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F7R1 register *******************/
+#define CAN_F7R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F7R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F7R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F7R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F7R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F7R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F7R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F7R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F7R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F7R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F7R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F7R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F7R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F7R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F7R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F7R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F7R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F7R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F7R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F7R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F7R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F7R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F7R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F7R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F7R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F7R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F7R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F7R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F7R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F7R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F7R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F7R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F8R1 register *******************/
+#define CAN_F8R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F8R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F8R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F8R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F8R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F8R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F8R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F8R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F8R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F8R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F8R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F8R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F8R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F8R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F8R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F8R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F8R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F8R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F8R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F8R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F8R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F8R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F8R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F8R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F8R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F8R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F8R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F8R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F8R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F8R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F8R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F8R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F9R1 register *******************/
+#define CAN_F9R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F9R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F9R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F9R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F9R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F9R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F9R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F9R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F9R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F9R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F9R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F9R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F9R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F9R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F9R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F9R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F9R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F9R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F9R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F9R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F9R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F9R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F9R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F9R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F9R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F9R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F9R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F9R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F9R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F9R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F9R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F9R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F10R1 register ******************/
+#define CAN_F10R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F10R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F10R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F10R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F10R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F10R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F10R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F10R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F10R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F10R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F10R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F10R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F10R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F10R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F10R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F10R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F10R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F10R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F10R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F10R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F10R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F10R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F10R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F10R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F10R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F10R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F10R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F10R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F10R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F10R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F10R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F10R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F11R1 register ******************/
+#define CAN_F11R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F11R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F11R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F11R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F11R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F11R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F11R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F11R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F11R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F11R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F11R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F11R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F11R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F11R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F11R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F11R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F11R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F11R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F11R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F11R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F11R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F11R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F11R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F11R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F11R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F11R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F11R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F11R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F11R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F11R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F11R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F11R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F12R1 register ******************/
+#define CAN_F12R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F12R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F12R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F12R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F12R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F12R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F12R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F12R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F12R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F12R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F12R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F12R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F12R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F12R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F12R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F12R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F12R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F12R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F12R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F12R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F12R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F12R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F12R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F12R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F12R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F12R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F12R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F12R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F12R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F12R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F12R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F12R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F13R1 register ******************/
+#define CAN_F13R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F13R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F13R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F13R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F13R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F13R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F13R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F13R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F13R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F13R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F13R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F13R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F13R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F13R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F13R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F13R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F13R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F13R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F13R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F13R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F13R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F13R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F13R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F13R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F13R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F13R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F13R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F13R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F13R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F13R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F13R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F13R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F0R2 register *******************/
+#define CAN_F0R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F0R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F0R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F0R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F0R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F0R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F0R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F0R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F0R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F0R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F0R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F0R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F0R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F0R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F0R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F0R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F0R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F0R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F0R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F0R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F0R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F0R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F0R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F0R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F0R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F0R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F0R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F0R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F0R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F0R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F0R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F0R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F1R2 register *******************/
+#define CAN_F1R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F1R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F1R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F1R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F1R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F1R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F1R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F1R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F1R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F1R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F1R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F1R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F1R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F1R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F1R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F1R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F1R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F1R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F1R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F1R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F1R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F1R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F1R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F1R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F1R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F1R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F1R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F1R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F1R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F1R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F1R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F1R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F2R2 register *******************/
+#define CAN_F2R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F2R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F2R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F2R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F2R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F2R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F2R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F2R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F2R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F2R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F2R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F2R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F2R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F2R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F2R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F2R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F2R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F2R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F2R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F2R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F2R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F2R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F2R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F2R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F2R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F2R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F2R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F2R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F2R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F2R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F2R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F2R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F3R2 register *******************/
+#define CAN_F3R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F3R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F3R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F3R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F3R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F3R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F3R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F3R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F3R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F3R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F3R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F3R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F3R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F3R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F3R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F3R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F3R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F3R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F3R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F3R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F3R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F3R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F3R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F3R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F3R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F3R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F3R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F3R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F3R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F3R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F3R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F3R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F4R2 register *******************/
+#define CAN_F4R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F4R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F4R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F4R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F4R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F4R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F4R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F4R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F4R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F4R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F4R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F4R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F4R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F4R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F4R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F4R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F4R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F4R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F4R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F4R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F4R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F4R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F4R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F4R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F4R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F4R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F4R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F4R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F4R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F4R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F4R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F4R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F5R2 register *******************/
+#define CAN_F5R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F5R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F5R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F5R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F5R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F5R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F5R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F5R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F5R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F5R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F5R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F5R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F5R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F5R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F5R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F5R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F5R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F5R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F5R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F5R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F5R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F5R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F5R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F5R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F5R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F5R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F5R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F5R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F5R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F5R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F5R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F5R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F6R2 register *******************/
+#define CAN_F6R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F6R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F6R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F6R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F6R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F6R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F6R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F6R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F6R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F6R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F6R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F6R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F6R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F6R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F6R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F6R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F6R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F6R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F6R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F6R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F6R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F6R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F6R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F6R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F6R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F6R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F6R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F6R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F6R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F6R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F6R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F6R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F7R2 register *******************/
+#define CAN_F7R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F7R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F7R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F7R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F7R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F7R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F7R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F7R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F7R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F7R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F7R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F7R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F7R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F7R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F7R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F7R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F7R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F7R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F7R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F7R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F7R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F7R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F7R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F7R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F7R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F7R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F7R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F7R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F7R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F7R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F7R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F7R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F8R2 register *******************/
+#define CAN_F8R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F8R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F8R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F8R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F8R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F8R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F8R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F8R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F8R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F8R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F8R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F8R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F8R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F8R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F8R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F8R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F8R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F8R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F8R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F8R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F8R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F8R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F8R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F8R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F8R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F8R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F8R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F8R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F8R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F8R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F8R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F8R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F9R2 register *******************/
+#define CAN_F9R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F9R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F9R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F9R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F9R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F9R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F9R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F9R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F9R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F9R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F9R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F9R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F9R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F9R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F9R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F9R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F9R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F9R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F9R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F9R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F9R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F9R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F9R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F9R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F9R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F9R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F9R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F9R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F9R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F9R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F9R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F9R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F10R2 register ******************/
+#define CAN_F10R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F10R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F10R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F10R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F10R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F10R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F10R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F10R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F10R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F10R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F10R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F10R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F10R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F10R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F10R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F10R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F10R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F10R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F10R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F10R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F10R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F10R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F10R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F10R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F10R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F10R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F10R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F10R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F10R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F10R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F10R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F10R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F11R2 register ******************/
+#define CAN_F11R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F11R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F11R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F11R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F11R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F11R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F11R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F11R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F11R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F11R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F11R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F11R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F11R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F11R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F11R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F11R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F11R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F11R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F11R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F11R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F11R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F11R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F11R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F11R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F11R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F11R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F11R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F11R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F11R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F11R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F11R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F11R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F12R2 register ******************/
+#define CAN_F12R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F12R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F12R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F12R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F12R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F12R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F12R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F12R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F12R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F12R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F12R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F12R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F12R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F12R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F12R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F12R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F12R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F12R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F12R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F12R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F12R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F12R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F12R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F12R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F12R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F12R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F12R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F12R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F12R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F12R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F12R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F12R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F13R2 register ******************/
+#define CAN_F13R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F13R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F13R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F13R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F13R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F13R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F13R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F13R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F13R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F13R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F13R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F13R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F13R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F13R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F13R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F13R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F13R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F13R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F13R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F13R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F13R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F13R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F13R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F13R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F13R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F13R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F13R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F13R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F13R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F13R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F13R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F13R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************************************************************************/
+/* */
+/* HDMI-CEC (CEC) */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for CEC_CR register *********************/
+#define CEC_CR_CECEN ((uint32_t)0x00000001) /*!< CEC Enable */
+#define CEC_CR_TXSOM ((uint32_t)0x00000002) /*!< CEC Tx Start Of Message */
+#define CEC_CR_TXEOM ((uint32_t)0x00000004) /*!< CEC Tx End Of Message */
+
+/******************* Bit definition for CEC_CFGR register *******************/
+#define CEC_CFGR_SFT ((uint32_t)0x00000007) /*!< CEC Signal Free Time */
+#define CEC_CFGR_RXTOL ((uint32_t)0x00000008) /*!< CEC Tolerance */
+#define CEC_CFGR_BRESTP ((uint32_t)0x00000010) /*!< CEC Rx Stop */
+#define CEC_CFGR_BREGEN ((uint32_t)0x00000020) /*!< CEC Bit Rising Error generation */
+#define CEC_CFGR_LBPEGEN ((uint32_t)0x00000040) /*!< CEC Long Bit Period Error gener. */
+#define CEC_CFGR_BRDNOGEN ((uint32_t)0x00000080) /*!< CEC Broadcast No Error generation */
+#define CEC_CFGR_SFTOPT ((uint32_t)0x00000100) /*!< CEC Signal Free Time optional */
+#define CEC_CFGR_OAR ((uint32_t)0x7FFF0000) /*!< CEC Own Address */
+#define CEC_CFGR_LSTN ((uint32_t)0x80000000) /*!< CEC Listen mode */
+
+/******************* Bit definition for CEC_TXDR register *******************/
+#define CEC_TXDR_TXD ((uint32_t)0x000000FF) /*!< CEC Tx Data */
+
+/******************* Bit definition for CEC_RXDR register *******************/
+#define CEC_TXDR_RXD ((uint32_t)0x000000FF) /*!< CEC Rx Data */
+
+/******************* Bit definition for CEC_ISR register ********************/
+#define CEC_ISR_RXBR ((uint32_t)0x00000001) /*!< CEC Rx-Byte Received */
+#define CEC_ISR_RXEND ((uint32_t)0x00000002) /*!< CEC End Of Reception */
+#define CEC_ISR_RXOVR ((uint32_t)0x00000004) /*!< CEC Rx-Overrun */
+#define CEC_ISR_BRE ((uint32_t)0x00000008) /*!< CEC Rx Bit Rising Error */
+#define CEC_ISR_SBPE ((uint32_t)0x00000010) /*!< CEC Rx Short Bit period Error */
+#define CEC_ISR_LBPE ((uint32_t)0x00000020) /*!< CEC Rx Long Bit period Error */
+#define CEC_ISR_RXACKE ((uint32_t)0x00000040) /*!< CEC Rx Missing Acknowledge */
+#define CEC_ISR_ARBLST ((uint32_t)0x00000080) /*!< CEC Arbitration Lost */
+#define CEC_ISR_TXBR ((uint32_t)0x00000100) /*!< CEC Tx Byte Request */
+#define CEC_ISR_TXEND ((uint32_t)0x00000200) /*!< CEC End of Transmission */
+#define CEC_ISR_TXUDR ((uint32_t)0x00000400) /*!< CEC Tx-Buffer Underrun */
+#define CEC_ISR_TXERR ((uint32_t)0x00000800) /*!< CEC Tx-Error */
+#define CEC_ISR_TXACKE ((uint32_t)0x00001000) /*!< CEC Tx Missing Acknowledge */
+
+/******************* Bit definition for CEC_IER register ********************/
+#define CEC_IER_RXBRIE ((uint32_t)0x00000001) /*!< CEC Rx-Byte Received IT Enable */
+#define CEC_IER_RXENDIE ((uint32_t)0x00000002) /*!< CEC End Of Reception IT Enable */
+#define CEC_IER_RXOVRIE ((uint32_t)0x00000004) /*!< CEC Rx-Overrun IT Enable */
+#define CEC_IER_BREIE ((uint32_t)0x00000008) /*!< CEC Rx Bit Rising Error IT Enable */
+#define CEC_IER_SBPEIE ((uint32_t)0x00000010) /*!< CEC Rx Short Bit period Error IT Enable*/
+#define CEC_IER_LBPEIE ((uint32_t)0x00000020) /*!< CEC Rx Long Bit period Error IT Enable */
+#define CEC_IER_RXACKEIE ((uint32_t)0x00000040) /*!< CEC Rx Missing Acknowledge IT Enable */
+#define CEC_IER_ARBLSTIE ((uint32_t)0x00000080) /*!< CEC Arbitration Lost IT Enable */
+#define CEC_IER_TXBRIE ((uint32_t)0x00000100) /*!< CEC Tx Byte Request IT Enable */
+#define CEC_IER_TXENDIE ((uint32_t)0x00000200) /*!< CEC End of Transmission IT Enable */
+#define CEC_IER_TXUDRIE ((uint32_t)0x00000400) /*!< CEC Tx-Buffer Underrun IT Enable */
+#define CEC_IER_TXERRIE ((uint32_t)0x00000800) /*!< CEC Tx-Error IT Enable */
+#define CEC_IER_TXACKEIE ((uint32_t)0x00001000) /*!< CEC Tx Missing Acknowledge IT Enable */
+
+
+/******************************************************************************/
+/* */
+/* Analog Comparators (COMP) */
+/* */
+/******************************************************************************/
+/*********************** Bit definition for COMP_CSR register ***************/
+/* COMP1 bits definition */
+#define COMP_CSR_COMP1EN ((uint32_t)0x00000001) /*!< COMP1 enable */
+#define COMP_CSR_COMP1SW1 ((uint32_t)0x00000002) /*!< SW1 switch control */
+#define COMP_CSR_COMP1MODE ((uint32_t)0x0000000C) /*!< COMP1 power mode */
+#define COMP_CSR_COMP1MODE_0 ((uint32_t)0x00000004) /*!< COMP1 power mode bit 0 */
+#define COMP_CSR_COMP1MODE_1 ((uint32_t)0x00000008) /*!< COMP1 power mode bit 1 */
+#define COMP_CSR_COMP1INSEL ((uint32_t)0x00000070) /*!< COMP1 inverting input select */
+#define COMP_CSR_COMP1INSEL_0 ((uint32_t)0x00000010) /*!< COMP1 inverting input select bit 0 */
+#define COMP_CSR_COMP1INSEL_1 ((uint32_t)0x00000020) /*!< COMP1 inverting input select bit 1 */
+#define COMP_CSR_COMP1INSEL_2 ((uint32_t)0x00000040) /*!< COMP1 inverting input select bit 2 */
+#define COMP_CSR_COMP1OUTSEL ((uint32_t)0x00000700) /*!< COMP1 output select */
+#define COMP_CSR_COMP1OUTSEL_0 ((uint32_t)0x00000100) /*!< COMP1 output select bit 0 */
+#define COMP_CSR_COMP1OUTSEL_1 ((uint32_t)0x00000200) /*!< COMP1 output select bit 1 */
+#define COMP_CSR_COMP1OUTSEL_2 ((uint32_t)0x00000400) /*!< COMP1 output select bit 2 */
+#define COMP_CSR_COMP1POL ((uint32_t)0x00000800) /*!< COMP1 output polarity */
+#define COMP_CSR_COMP1HYST ((uint32_t)0x00003000) /*!< COMP1 hysteresis */
+#define COMP_CSR_COMP1HYST_0 ((uint32_t)0x00001000) /*!< COMP1 hysteresis bit 0 */
+#define COMP_CSR_COMP1HYST_1 ((uint32_t)0x00002000) /*!< COMP1 hysteresis bit 1 */
+#define COMP_CSR_COMP1OUT ((uint32_t)0x00004000) /*!< COMP1 output level */
+#define COMP_CSR_COMP1LOCK ((uint32_t)0x00008000) /*!< COMP1 lock */
+/* COMP2 bits definition */
+#define COMP_CSR_COMP2EN ((uint32_t)0x00010000) /*!< COMP2 enable */
+#define COMP_CSR_COMP2MODE ((uint32_t)0x000C0000) /*!< COMP2 power mode */
+#define COMP_CSR_COMP2MODE_0 ((uint32_t)0x00040000) /*!< COMP2 power mode bit 0 */
+#define COMP_CSR_COMP2MODE_1 ((uint32_t)0x00080000) /*!< COMP2 power mode bit 1 */
+#define COMP_CSR_COMP2INSEL ((uint32_t)0x00700000) /*!< COMP2 inverting input select */
+#define COMP_CSR_COMP2INSEL_0 ((uint32_t)0x00100000) /*!< COMP2 inverting input select bit 0 */
+#define COMP_CSR_COMP2INSEL_1 ((uint32_t)0x00200000) /*!< COMP2 inverting input select bit 1 */
+#define COMP_CSR_COMP2INSEL_2 ((uint32_t)0x00400000) /*!< COMP2 inverting input select bit 2 */
+#define COMP_CSR_WNDWEN ((uint32_t)0x00800000) /*!< Comparators window mode enable */
+#define COMP_CSR_COMP2OUTSEL ((uint32_t)0x07000000) /*!< COMP2 output select */
+#define COMP_CSR_COMP2OUTSEL_0 ((uint32_t)0x01000000) /*!< COMP2 output select bit 0 */
+#define COMP_CSR_COMP2OUTSEL_1 ((uint32_t)0x02000000) /*!< COMP2 output select bit 1 */
+#define COMP_CSR_COMP2OUTSEL_2 ((uint32_t)0x04000000) /*!< COMP2 output select bit 2 */
+#define COMP_CSR_COMP2POL ((uint32_t)0x08000000) /*!< COMP2 output polarity */
+#define COMP_CSR_COMP2HYST ((uint32_t)0x30000000) /*!< COMP2 hysteresis */
+#define COMP_CSR_COMP2HYST_0 ((uint32_t)0x10000000) /*!< COMP2 hysteresis bit 0 */
+#define COMP_CSR_COMP2HYST_1 ((uint32_t)0x20000000) /*!< COMP2 hysteresis bit 1 */
+#define COMP_CSR_COMP2OUT ((uint32_t)0x40000000) /*!< COMP2 output level */
+#define COMP_CSR_COMP2LOCK ((uint32_t)0x80000000) /*!< COMP2 lock */
+/* COMPx bits definition */
+#define COMP_CSR_COMPxEN ((uint16_t)0x0001) /*!< COMPx enable */
+#define COMP_CSR_COMPxMODE ((uint16_t)0x000C) /*!< COMPx power mode */
+#define COMP_CSR_COMPxMODE_0 ((uint16_t)0x0004) /*!< COMPx power mode bit 0 */
+#define COMP_CSR_COMPxMODE_1 ((uint16_t)0x0008) /*!< COMPx power mode bit 1 */
+#define COMP_CSR_COMPxINSEL ((uint16_t)0x0070) /*!< COMPx inverting input select */
+#define COMP_CSR_COMPxINSEL_0 ((uint16_t)0x0010) /*!< COMPx inverting input select bit 0 */
+#define COMP_CSR_COMPxINSEL_1 ((uint16_t)0x0020) /*!< COMPx inverting input select bit 1 */
+#define COMP_CSR_COMPxINSEL_2 ((uint16_t)0x0040) /*!< COMPx inverting input select bit 2 */
+#define COMP_CSR_COMPxOUTSEL ((uint16_t)0x0700) /*!< COMPx output select */
+#define COMP_CSR_COMPxOUTSEL_0 ((uint16_t)0x0100) /*!< COMPx output select bit 0 */
+#define COMP_CSR_COMPxOUTSEL_1 ((uint16_t)0x0200) /*!< COMPx output select bit 1 */
+#define COMP_CSR_COMPxOUTSEL_2 ((uint16_t)0x0400) /*!< COMPx output select bit 2 */
+#define COMP_CSR_COMPxPOL ((uint16_t)0x0800) /*!< COMPx output polarity */
+#define COMP_CSR_COMPxHYST ((uint16_t)0x3000) /*!< COMPx hysteresis */
+#define COMP_CSR_COMPxHYST_0 ((uint16_t)0x1000) /*!< COMPx hysteresis bit 0 */
+#define COMP_CSR_COMPxHYST_1 ((uint16_t)0x2000) /*!< COMPx hysteresis bit 1 */
+#define COMP_CSR_COMPxOUT ((uint16_t)0x4000) /*!< COMPx output level */
+#define COMP_CSR_COMPxLOCK ((uint16_t)0x8000) /*!< COMPx lock */
+
+/******************************************************************************/
+/* */
+/* CRC calculation unit (CRC) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for CRC_DR register *********************/
+#define CRC_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data register bits */
+
+/******************* Bit definition for CRC_IDR register ********************/
+#define CRC_IDR_IDR ((uint8_t)0xFF) /*!< General-purpose 8-bit data register bits */
+
+/******************** Bit definition for CRC_CR register ********************/
+#define CRC_CR_RESET ((uint32_t)0x00000001) /*!< RESET the CRC computation unit bit */
+#define CRC_CR_POLYSIZE ((uint32_t)0x00000018) /*!< Polynomial size bits */
+#define CRC_CR_POLYSIZE_0 ((uint32_t)0x00000008) /*!< Polynomial size bit 0 */
+#define CRC_CR_POLYSIZE_1 ((uint32_t)0x00000010) /*!< Polynomial size bit 1 */
+#define CRC_CR_REV_IN ((uint32_t)0x00000060) /*!< REV_IN Reverse Input Data bits */
+#define CRC_CR_REV_IN_0 ((uint32_t)0x00000020) /*!< REV_IN Bit 0 */
+#define CRC_CR_REV_IN_1 ((uint32_t)0x00000040) /*!< REV_IN Bit 1 */
+#define CRC_CR_REV_OUT ((uint32_t)0x00000080) /*!< REV_OUT Reverse Output Data bits */
+
+/******************* Bit definition for CRC_INIT register *******************/
+#define CRC_INIT_INIT ((uint32_t)0xFFFFFFFF) /*!< Initial CRC value bits */
+
+/******************* Bit definition for CRC_POL register ********************/
+#define CRC_POL_POL ((uint32_t)0xFFFFFFFF) /*!< Coefficients of the polynomial */
+
+/******************************************************************************/
+/* */
+/* CRS Clock Recovery System */
+/******************************************************************************/
+
+/******************* Bit definition for CRS_CR register *********************/
+#define CRS_CR_SYNCOKIE ((uint32_t)0x00000001) /* SYNC event OK interrupt enable */
+#define CRS_CR_SYNCWARNIE ((uint32_t)0x00000002) /* SYNC warning interrupt enable */
+#define CRS_CR_ERRIE ((uint32_t)0x00000004) /* SYNC error interrupt enable */
+#define CRS_CR_ESYNCIE ((uint32_t)0x00000008) /* Expected SYNC(ESYNCF) interrupt Enable*/
+#define CRS_CR_CEN ((uint32_t)0x00000020) /* Frequency error counter enable */
+#define CRS_CR_AUTOTRIMEN ((uint32_t)0x00000040) /* Automatic trimming enable */
+#define CRS_CR_SWSYNC ((uint32_t)0x00000080) /* A Software SYNC event is generated */
+#define CRS_CR_TRIM ((uint32_t)0x00003F00) /* HSI48 oscillator smooth trimming */
+
+/******************* Bit definition for CRS_CFGR register *********************/
+#define CRS_CFGR_RELOAD ((uint32_t)0x0000FFFF) /* Counter reload value */
+#define CRS_CFGR_FELIM ((uint32_t)0x00FF0000) /* Frequency error limit */
+
+#define CRS_CFGR_SYNCDIV ((uint32_t)0x07000000) /* SYNC divider */
+#define CRS_CFGR_SYNCDIV_0 ((uint32_t)0x01000000) /* Bit 0 */
+#define CRS_CFGR_SYNCDIV_1 ((uint32_t)0x02000000) /* Bit 1 */
+#define CRS_CFGR_SYNCDIV_2 ((uint32_t)0x04000000) /* Bit 2 */
+
+#define CRS_CFGR_SYNCSRC ((uint32_t)0x30000000) /* SYNC signal source selection */
+#define CRS_CFGR_SYNCSRC_0 ((uint32_t)0x10000000) /* Bit 0 */
+#define CRS_CFGR_SYNCSRC_1 ((uint32_t)0x20000000) /* Bit 1 */
+
+#define CRS_CFGR_SYNCPOL ((uint32_t)0x80000000) /* SYNC polarity selection */
+
+/******************* Bit definition for CRS_ISR register *********************/
+#define CRS_ISR_SYNCOKF ((uint32_t)0x00000001) /* SYNC event OK flag */
+#define CRS_ISR_SYNCWARNF ((uint32_t)0x00000002) /* SYNC warning */
+#define CRS_ISR_ERRF ((uint32_t)0x00000004) /* SYNC error flag */
+#define CRS_ISR_ESYNCF ((uint32_t)0x00000008) /* Expected SYNC flag */
+#define CRS_ISR_SYNCERR ((uint32_t)0x00000100) /* SYNC error */
+#define CRS_ISR_SYNCMISS ((uint32_t)0x00000200) /* SYNC missed */
+#define CRS_ISR_TRIMOVF ((uint32_t)0x00000400) /* Trimming overflow or underflow */
+#define CRS_ISR_FEDIR ((uint32_t)0x00008000) /* Frequency error direction */
+#define CRS_ISR_FECAP ((uint32_t)0xFFFF0000) /* Frequency error capture */
+
+/******************* Bit definition for CRS_ICR register *********************/
+#define CRS_ICR_SYNCOKC ((uint32_t)0x00000001) /* SYNC event OK clear flag */
+#define CRS_ICR_SYNCWARNC ((uint32_t)0x00000002) /* SYNC warning clear flag */
+#define CRS_ICR_ERRC ((uint32_t)0x00000004) /* Error clear flag */
+#define CRS_ICR_ESYNCC ((uint32_t)0x00000008) /* Expected SYNC clear flag */
+
+/******************************************************************************/
+/* */
+/* Digital to Analog Converter (DAC) */
+/* */
+/******************************************************************************/
+/******************** Bit definition for DAC_CR register ********************/
+#define DAC_CR_EN1 ((uint32_t)0x00000001) /*!< DAC channel1 enable */
+#define DAC_CR_BOFF1 ((uint32_t)0x00000002) /*!< DAC channel1 output buffer disable */
+#define DAC_CR_TEN1 ((uint32_t)0x00000004) /*!< DAC channel1 Trigger enable */
+
+#define DAC_CR_TSEL1 ((uint32_t)0x00000038) /*!< TSEL1[2:0] (DAC channel1 Trigger selection) */
+#define DAC_CR_TSEL1_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define DAC_CR_TSEL1_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define DAC_CR_TSEL1_2 ((uint32_t)0x00000020) /*!< Bit 2 */
+
+#define DAC_CR_WAVE1 ((uint32_t)0x000000C0) /*!< WAVE1[1:0] (DAC channel1 noise/triangle wave generation enable) */
+#define DAC_CR_WAVE1_0 ((uint32_t)0x00000040) /*!< Bit 0 */
+#define DAC_CR_WAVE1_1 ((uint32_t)0x00000080) /*!< Bit 1 */
+
+#define DAC_CR_MAMP1 ((uint32_t)0x00000F00) /*!< MAMP1[3:0] (DAC channel1 Mask/Amplitude selector) */
+#define DAC_CR_MAMP1_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define DAC_CR_MAMP1_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define DAC_CR_MAMP1_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define DAC_CR_MAMP1_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+
+#define DAC_CR_DMAEN1 ((uint32_t)0x00001000) /*!< DAC channel1 DMA enable */
+#define DAC_CR_DMAUDRIE1 ((uint32_t)0x00002000) /*!< DAC channel1 DMA Underrun Interrupt enable */
+
+#define DAC_CR_EN2 ((uint32_t)0x00010000) /*!< DAC channel2 enable */
+#define DAC_CR_BOFF2 ((uint32_t)0x00020000) /*!< DAC channel2 output buffer disable */
+#define DAC_CR_TEN2 ((uint32_t)0x00040000) /*!< DAC channel2 Trigger enable */
+
+#define DAC_CR_TSEL2 ((uint32_t)0x00380000) /*!< TSEL2[2:0] (DAC channel2 Trigger selection) */
+#define DAC_CR_TSEL2_0 ((uint32_t)0x00080000) /*!< Bit 0 */
+#define DAC_CR_TSEL2_1 ((uint32_t)0x00100000) /*!< Bit 1 */
+#define DAC_CR_TSEL2_2 ((uint32_t)0x00200000) /*!< Bit 2 */
+
+#define DAC_CR_WAVE2 ((uint32_t)0x00C00000) /*!< WAVE2[1:0] (DAC channel2 noise/triangle wave generation enable) */
+#define DAC_CR_WAVE2_0 ((uint32_t)0x00400000) /*!< Bit 0 */
+#define DAC_CR_WAVE2_1 ((uint32_t)0x00800000) /*!< Bit 1 */
+
+#define DAC_CR_MAMP2 ((uint32_t)0x0F000000) /*!< MAMP2[3:0] (DAC channel2 Mask/Amplitude selector) */
+#define DAC_CR_MAMP2_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define DAC_CR_MAMP2_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define DAC_CR_MAMP2_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+#define DAC_CR_MAMP2_3 ((uint32_t)0x08000000) /*!< Bit 3 */
+
+#define DAC_CR_DMAEN2 ((uint32_t)0x10000000) /*!< DAC channel2 DMA enabled */
+#define DAC_CR_DMAUDRIE2 ((uint32_t)0x20000000) /*!< DAC channel2 DMA Underrun Interrupt enable */
+
+/***************** Bit definition for DAC_SWTRIGR register ******************/
+#define DAC_SWTRIGR_SWTRIG1 ((uint32_t)0x00000001) /*!< DAC channel1 software trigger */
+#define DAC_SWTRIGR_SWTRIG2 ((uint32_t)0x00000002) /*!< DAC channel2 software trigger */
+
+/***************** Bit definition for DAC_DHR12R1 register ******************/
+#define DAC_DHR12R1_DACC1DHR ((uint32_t)0x00000FFF) /*!< DAC channel1 12-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12L1 register ******************/
+#define DAC_DHR12L1_DACC1DHR ((uint32_t)0x0000FFF0) /*!< DAC channel1 12-bit Left aligned data */
+
+/****************** Bit definition for DAC_DHR8R1 register ******************/
+#define DAC_DHR8R1_DACC1DHR ((uint32_t)0x000000FF) /*!< DAC channel1 8-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12R2 register ******************/
+#define DAC_DHR12R2_DACC2DHR ((uint32_t)0x00000FFF) /*!< DAC channel2 12-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12L2 register ******************/
+#define DAC_DHR12L2_DACC2DHR ((uint32_t)0x0000FFF0) /*!< DAC channel2 12-bit Left aligned data */
+
+/****************** Bit definition for DAC_DHR8R2 register ******************/
+#define DAC_DHR8R2_DACC2DHR ((uint32_t)0x000000FF) /*!< DAC channel2 8-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12RD register ******************/
+#define DAC_DHR12RD_DACC1DHR ((uint32_t)0x00000FFF) /*!< DAC channel1 12-bit Right aligned data */
+#define DAC_DHR12RD_DACC2DHR ((uint32_t)0x0FFF0000) /*!< DAC channel2 12-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12LD register ******************/
+#define DAC_DHR12LD_DACC1DHR ((uint32_t)0x0000FFF0) /*!< DAC channel1 12-bit Left aligned data */
+#define DAC_DHR12LD_DACC2DHR ((uint32_t)0xFFF00000) /*!< DAC channel2 12-bit Left aligned data */
+
+/****************** Bit definition for DAC_DHR8RD register ******************/
+#define DAC_DHR8RD_DACC1DHR ((uint32_t)0x000000FF) /*!< DAC channel1 8-bit Right aligned data */
+#define DAC_DHR8RD_DACC2DHR ((uint32_t)0x0000FF00) /*!< DAC channel2 8-bit Right aligned data */
+
+/******************* Bit definition for DAC_DOR1 register *******************/
+#define DAC_DOR1_DACC1DOR ((uint32_t)0x00000FFF) /*!< DAC channel1 data output */
+
+/******************* Bit definition for DAC_DOR2 register *******************/
+#define DAC_DOR2_DACC2DOR ((uint32_t)0x00000FFF) /*!< DAC channel2 data output */
+
+/******************** Bit definition for DAC_SR register ********************/
+#define DAC_SR_DMAUDR1 ((uint32_t)0x00002000) /*!< DAC channel1 DMA underrun flag */
+#define DAC_SR_DMAUDR2 ((uint32_t)0x20000000) /*!< DAC channel2 DMA underrun flag */
+
+/******************************************************************************/
+/* */
+/* Debug MCU (DBGMCU) */
+/* */
+/******************************************************************************/
+
+/**************** Bit definition for DBGMCU_IDCODE register *****************/
+#define DBGMCU_IDCODE_DEV_ID ((uint32_t)0x00000FFF) /*!< Device Identifier */
+
+#define DBGMCU_IDCODE_REV_ID ((uint32_t)0xFFFF0000) /*!< REV_ID[15:0] bits (Revision Identifier) */
+#define DBGMCU_IDCODE_REV_ID_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define DBGMCU_IDCODE_REV_ID_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define DBGMCU_IDCODE_REV_ID_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define DBGMCU_IDCODE_REV_ID_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+#define DBGMCU_IDCODE_REV_ID_4 ((uint32_t)0x00100000) /*!< Bit 4 */
+#define DBGMCU_IDCODE_REV_ID_5 ((uint32_t)0x00200000) /*!< Bit 5 */
+#define DBGMCU_IDCODE_REV_ID_6 ((uint32_t)0x00400000) /*!< Bit 6 */
+#define DBGMCU_IDCODE_REV_ID_7 ((uint32_t)0x00800000) /*!< Bit 7 */
+#define DBGMCU_IDCODE_REV_ID_8 ((uint32_t)0x01000000) /*!< Bit 8 */
+#define DBGMCU_IDCODE_REV_ID_9 ((uint32_t)0x02000000) /*!< Bit 9 */
+#define DBGMCU_IDCODE_REV_ID_10 ((uint32_t)0x04000000) /*!< Bit 10 */
+#define DBGMCU_IDCODE_REV_ID_11 ((uint32_t)0x08000000) /*!< Bit 11 */
+#define DBGMCU_IDCODE_REV_ID_12 ((uint32_t)0x10000000) /*!< Bit 12 */
+#define DBGMCU_IDCODE_REV_ID_13 ((uint32_t)0x20000000) /*!< Bit 13 */
+#define DBGMCU_IDCODE_REV_ID_14 ((uint32_t)0x40000000) /*!< Bit 14 */
+#define DBGMCU_IDCODE_REV_ID_15 ((uint32_t)0x80000000) /*!< Bit 15 */
+
+/****************** Bit definition for DBGMCU_CR register *******************/
+#define DBGMCU_CR_DBG_STOP ((uint32_t)0x00000002) /*!< Debug Stop Mode */
+#define DBGMCU_CR_DBG_STANDBY ((uint32_t)0x00000004) /*!< Debug Standby mode */
+
+/****************** Bit definition for DBGMCU_APB1_FZ register **************/
+#define DBGMCU_APB1_FZ_DBG_TIM2_STOP ((uint32_t)0x00000001) /*!< TIM2 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM3_STOP ((uint32_t)0x00000002) /*!< TIM3 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM6_STOP ((uint32_t)0x00000010) /*!< TIM6 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM7_STOP ((uint32_t)0x00000020) /*!< TIM7 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM14_STOP ((uint32_t)0x00000100) /*!< TIM14 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_RTC_STOP ((uint32_t)0x00000400) /*!< RTC Calendar frozen when core is halted */
+#define DBGMCU_APB1_FZ_DBG_WWDG_STOP ((uint32_t)0x00000800) /*!< Debug Window Watchdog stopped when Core is halted */
+#define DBGMCU_APB1_FZ_DBG_IWDG_STOP ((uint32_t)0x00001000) /*!< Debug Independent Watchdog stopped when Core is halted */
+#define DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00200000) /*!< I2C1 SMBUS timeout mode stopped when Core is halted */
+#define DBGMCU_APB1_FZ_DBG_CAN_STOP ((uint32_t)0x02000000) /*!< CAN debug stopped when Core is halted */
+
+/****************** Bit definition for DBGMCU_APB2_FZ register **************/
+#define DBGMCU_APB2_FZ_DBG_TIM1_STOP ((uint32_t)0x00000800) /*!< TIM1 counter stopped when core is halted */
+#define DBGMCU_APB2_FZ_DBG_TIM15_STOP ((uint32_t)0x00010000) /*!< TIM15 counter stopped when core is halted */
+#define DBGMCU_APB2_FZ_DBG_TIM16_STOP ((uint32_t)0x00020000) /*!< TIM16 counter stopped when core is halted */
+#define DBGMCU_APB2_FZ_DBG_TIM17_STOP ((uint32_t)0x00040000) /*!< TIM17 counter stopped when core is halted */
+
+/******************************************************************************/
+/* */
+/* DMA Controller (DMA) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for DMA_ISR register ********************/
+#define DMA_ISR_GIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt flag */
+#define DMA_ISR_TCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete flag */
+#define DMA_ISR_HTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer flag */
+#define DMA_ISR_TEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error flag */
+#define DMA_ISR_GIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt flag */
+#define DMA_ISR_TCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete flag */
+#define DMA_ISR_HTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer flag */
+#define DMA_ISR_TEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error flag */
+#define DMA_ISR_GIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt flag */
+#define DMA_ISR_TCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete flag */
+#define DMA_ISR_HTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer flag */
+#define DMA_ISR_TEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error flag */
+#define DMA_ISR_GIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt flag */
+#define DMA_ISR_TCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete flag */
+#define DMA_ISR_HTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer flag */
+#define DMA_ISR_TEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error flag */
+#define DMA_ISR_GIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt flag */
+#define DMA_ISR_TCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete flag */
+#define DMA_ISR_HTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer flag */
+#define DMA_ISR_TEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error flag */
+#define DMA_ISR_GIF6 ((uint32_t)0x00100000) /*!< Channel 6 Global interrupt flag */
+#define DMA_ISR_TCIF6 ((uint32_t)0x00200000) /*!< Channel 6 Transfer Complete flag */
+#define DMA_ISR_HTIF6 ((uint32_t)0x00400000) /*!< Channel 6 Half Transfer flag */
+#define DMA_ISR_TEIF6 ((uint32_t)0x00800000) /*!< Channel 6 Transfer Error flag */
+#define DMA_ISR_GIF7 ((uint32_t)0x01000000) /*!< Channel 7 Global interrupt flag */
+#define DMA_ISR_TCIF7 ((uint32_t)0x02000000) /*!< Channel 7 Transfer Complete flag */
+#define DMA_ISR_HTIF7 ((uint32_t)0x04000000) /*!< Channel 7 Half Transfer flag */
+#define DMA_ISR_TEIF7 ((uint32_t)0x08000000) /*!< Channel 7 Transfer Error flag */
+
+/******************* Bit definition for DMA_IFCR register *******************/
+#define DMA_IFCR_CGIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt clear */
+#define DMA_IFCR_CTCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete clear */
+#define DMA_IFCR_CHTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer clear */
+#define DMA_IFCR_CTEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error clear */
+#define DMA_IFCR_CGIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt clear */
+#define DMA_IFCR_CTCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete clear */
+#define DMA_IFCR_CHTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer clear */
+#define DMA_IFCR_CTEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error clear */
+#define DMA_IFCR_CGIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt clear */
+#define DMA_IFCR_CTCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete clear */
+#define DMA_IFCR_CHTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer clear */
+#define DMA_IFCR_CTEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error clear */
+#define DMA_IFCR_CGIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt clear */
+#define DMA_IFCR_CTCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete clear */
+#define DMA_IFCR_CHTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer clear */
+#define DMA_IFCR_CTEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error clear */
+#define DMA_IFCR_CGIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt clear */
+#define DMA_IFCR_CTCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete clear */
+#define DMA_IFCR_CHTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer clear */
+#define DMA_IFCR_CTEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error clear */
+#define DMA_IFCR_CGIF6 ((uint32_t)0x00100000) /*!< Channel 6 Global interrupt clear */
+#define DMA_IFCR_CTCIF6 ((uint32_t)0x00200000) /*!< Channel 6 Transfer Complete clear */
+#define DMA_IFCR_CHTIF6 ((uint32_t)0x00400000) /*!< Channel 6 Half Transfer clear */
+#define DMA_IFCR_CTEIF6 ((uint32_t)0x00800000) /*!< Channel 6 Transfer Error clear */
+#define DMA_IFCR_CGIF7 ((uint32_t)0x01000000) /*!< Channel 7 Global interrupt clear */
+#define DMA_IFCR_CTCIF7 ((uint32_t)0x02000000) /*!< Channel 7 Transfer Complete clear */
+#define DMA_IFCR_CHTIF7 ((uint32_t)0x04000000) /*!< Channel 7 Half Transfer clear */
+#define DMA_IFCR_CTEIF7 ((uint32_t)0x08000000) /*!< Channel 7 Transfer Error clear */
+
+/******************* Bit definition for DMA_CCR register ********************/
+#define DMA_CCR_EN ((uint32_t)0x00000001) /*!< Channel enable */
+#define DMA_CCR_TCIE ((uint32_t)0x00000002) /*!< Transfer complete interrupt enable */
+#define DMA_CCR_HTIE ((uint32_t)0x00000004) /*!< Half Transfer interrupt enable */
+#define DMA_CCR_TEIE ((uint32_t)0x00000008) /*!< Transfer error interrupt enable */
+#define DMA_CCR_DIR ((uint32_t)0x00000010) /*!< Data transfer direction */
+#define DMA_CCR_CIRC ((uint32_t)0x00000020) /*!< Circular mode */
+#define DMA_CCR_PINC ((uint32_t)0x00000040) /*!< Peripheral increment mode */
+#define DMA_CCR_MINC ((uint32_t)0x00000080) /*!< Memory increment mode */
+
+#define DMA_CCR_PSIZE ((uint32_t)0x00000300) /*!< PSIZE[1:0] bits (Peripheral size) */
+#define DMA_CCR_PSIZE_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define DMA_CCR_PSIZE_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+
+#define DMA_CCR_MSIZE ((uint32_t)0x00000C00) /*!< MSIZE[1:0] bits (Memory size) */
+#define DMA_CCR_MSIZE_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define DMA_CCR_MSIZE_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+
+#define DMA_CCR_PL ((uint32_t)0x00003000) /*!< PL[1:0] bits(Channel Priority level)*/
+#define DMA_CCR_PL_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define DMA_CCR_PL_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+
+#define DMA_CCR_MEM2MEM ((uint32_t)0x00004000) /*!< Memory to memory mode */
+
+/****************** Bit definition for DMA_CNDTR register *******************/
+#define DMA_CNDTR_NDT ((uint32_t)0x0000FFFF) /*!< Number of data to Transfer */
+
+/****************** Bit definition for DMA_CPAR register ********************/
+#define DMA_CPAR_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */
+
+/****************** Bit definition for DMA_CMAR register ********************/
+#define DMA_CMAR_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */
+
+/****************** Bit definition for DMA1_CSELR register ********************/
+#define DMA1_CSELR_DEFAULT ((uint32_t)0x00000000) /*!< Default remap position for DMA1 */
+#define DMA1_CSELR_CH1_ADC ((uint32_t)0x00000001) /*!< Remap ADC on DMA1 Channel 1*/
+#define DMA1_CSELR_CH1_TIM17_CH1 ((uint32_t)0x00000007) /*!< Remap TIM17 channel 1 on DMA1 channel 1 */
+#define DMA1_CSELR_CH1_TIM17_UP ((uint32_t)0x00000007) /*!< Remap TIM17 up on DMA1 channel 1 */
+#define DMA1_CSELR_CH1_USART1_RX ((uint32_t)0x00000008) /*!< Remap USART1 Rx on DMA1 channel 1 */
+#define DMA1_CSELR_CH1_USART2_RX ((uint32_t)0x00000009) /*!< Remap USART2 Rx on DMA1 channel 1 */
+#define DMA1_CSELR_CH1_USART3_RX ((uint32_t)0x0000000A) /*!< Remap USART3 Rx on DMA1 channel 1 */
+#define DMA1_CSELR_CH1_USART4_RX ((uint32_t)0x0000000B) /*!< Remap USART4 Rx on DMA1 channel 1 */
+#define DMA1_CSELR_CH1_USART5_RX ((uint32_t)0x0000000C) /*!< Remap USART5 Rx on DMA1 channel 1 */
+#define DMA1_CSELR_CH1_USART6_RX ((uint32_t)0x0000000D) /*!< Remap USART6 Rx on DMA1 channel 1 */
+#define DMA1_CSELR_CH1_USART7_RX ((uint32_t)0x0000000E) /*!< Remap USART7 Rx on DMA1 channel 1 */
+#define DMA1_CSELR_CH1_USART8_RX ((uint32_t)0x0000000F) /*!< Remap USART8 Rx on DMA1 channel 1 */
+#define DMA1_CSELR_CH2_ADC ((uint32_t)0x00000010) /*!< Remap ADC on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_I2C1_TX ((uint32_t)0x00000020) /*!< Remap I2C1 Tx on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_SPI1_RX ((uint32_t)0x00000030) /*!< Remap SPI1 Rx on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_TIM1_CH1 ((uint32_t)0x00000040) /*!< Remap TIM1 channel 1 on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_TIM17_CH1 ((uint32_t)0x00000070) /*!< Remap TIM17 channel 1 on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_TIM17_UP ((uint32_t)0x00000070) /*!< Remap TIM17 up on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_USART1_TX ((uint32_t)0x00000080) /*!< Remap USART1 Tx on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_USART2_TX ((uint32_t)0x00000090) /*!< Remap USART2 Tx on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_USART3_TX ((uint32_t)0x000000A0) /*!< Remap USART3 Tx on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_USART4_TX ((uint32_t)0x000000B0) /*!< Remap USART4 Tx on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_USART5_TX ((uint32_t)0x000000C0) /*!< Remap USART5 Tx on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_USART6_TX ((uint32_t)0x000000D0) /*!< Remap USART6 Tx on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_USART7_TX ((uint32_t)0x000000E0) /*!< Remap USART7 Tx on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_USART8_TX ((uint32_t)0x000000F0) /*!< Remap USART8 Tx on DMA1 channel 2 */
+#define DMA1_CSELR_CH3_TIM6_UP ((uint32_t)0x00000100) /*!< Remap TIM6 up on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_DAC_CH1 ((uint32_t)0x00000100) /*!< Remap DAC Channel 1on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_I2C1_RX ((uint32_t)0x00000200) /*!< Remap I2C1 Rx on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_SPI1_TX ((uint32_t)0x00000300) /*!< Remap SPI1 Tx on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_TIM1_CH2 ((uint32_t)0x00000400) /*!< Remap TIM1 channel 2 on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_TIM2_CH2 ((uint32_t)0x00000500) /*!< Remap TIM2 channel 2 on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_TIM16_CH1 ((uint32_t)0x00000700) /*!< Remap TIM16 channel 1 on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_TIM16_UP ((uint32_t)0x00000700) /*!< Remap TIM16 up on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_USART1_RX ((uint32_t)0x00000800) /*!< Remap USART1 Rx on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_USART2_RX ((uint32_t)0x00000900) /*!< Remap USART2 Rx on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_USART3_RX ((uint32_t)0x00000A00) /*!< Remap USART3 Rx on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_USART4_RX ((uint32_t)0x00000B00) /*!< Remap USART4 Rx on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_USART5_RX ((uint32_t)0x00000C00) /*!< Remap USART5 Rx on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_USART6_RX ((uint32_t)0x00000D00) /*!< Remap USART6 Rx on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_USART7_RX ((uint32_t)0x00000E00) /*!< Remap USART7 Rx on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_USART8_RX ((uint32_t)0x00000F00) /*!< Remap USART8 Rx on DMA1 channel 3 */
+#define DMA1_CSELR_CH4_TIM7_UP ((uint32_t)0x00001000) /*!< Remap TIM7 up on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_DAC_CH2 ((uint32_t)0x00001000) /*!< Remap DAC Channel 2 on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_I2C2_TX ((uint32_t)0x00002000) /*!< Remap I2C2 Tx on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_SPI2_RX ((uint32_t)0x00003000) /*!< Remap SPI2 Rx on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_TIM2_CH4 ((uint32_t)0x00005000) /*!< Remap TIM2 channel 4 on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_TIM3_CH1 ((uint32_t)0x00006000) /*!< Remap TIM3 channel 1 on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_TIM3_TRIG ((uint32_t)0x00006000) /*!< Remap TIM3 Trig on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_TIM16_CH1 ((uint32_t)0x00007000) /*!< Remap TIM16 channel 1 on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_TIM16_UP ((uint32_t)0x00007000) /*!< Remap TIM16 up on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_USART1_TX ((uint32_t)0x00008000) /*!< Remap USART1 Tx on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_USART2_TX ((uint32_t)0x00009000) /*!< Remap USART2 Tx on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_USART3_TX ((uint32_t)0x0000A000) /*!< Remap USART3 Tx on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_USART4_TX ((uint32_t)0x0000B000) /*!< Remap USART4 Tx on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_USART5_TX ((uint32_t)0x0000C000) /*!< Remap USART5 Tx on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_USART6_TX ((uint32_t)0x0000D000) /*!< Remap USART6 Tx on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_USART7_TX ((uint32_t)0x0000E000) /*!< Remap USART7 Tx on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_USART8_TX ((uint32_t)0x0000F000) /*!< Remap USART8 Tx on DMA1 channel 4 */
+#define DMA1_CSELR_CH5_I2C2_RX ((uint32_t)0x00020000) /*!< Remap I2C2 Rx on DMA1 channel 5 */
+#define DMA1_CSELR_CH5_SPI2_TX ((uint32_t)0x00030000) /*!< Remap SPI1 Tx on DMA1 channel 5 */
+#define DMA1_CSELR_CH5_TIM1_CH3 ((uint32_t)0x00040000) /*!< Remap TIM1 channel 3 on DMA1 channel 5 */
+#define DMA1_CSELR_CH5_USART1_RX ((uint32_t)0x00080000) /*!< Remap USART1 Rx on DMA1 channel 5 */
+#define DMA1_CSELR_CH5_USART2_RX ((uint32_t)0x00090000) /*!< Remap USART2 Rx on DMA1 channel 5 */
+#define DMA1_CSELR_CH5_USART3_RX ((uint32_t)0x000A0000) /*!< Remap USART3 Rx on DMA1 channel 5 */
+#define DMA1_CSELR_CH5_USART4_RX ((uint32_t)0x000B0000) /*!< Remap USART4 Rx on DMA1 channel 5 */
+#define DMA1_CSELR_CH5_USART5_RX ((uint32_t)0x000C0000) /*!< Remap USART5 Rx on DMA1 channel 5 */
+#define DMA1_CSELR_CH5_USART6_RX ((uint32_t)0x000D0000) /*!< Remap USART6 Rx on DMA1 channel 5 */
+#define DMA1_CSELR_CH5_USART7_RX ((uint32_t)0x000E0000) /*!< Remap USART7 Rx on DMA1 channel 5 */
+#define DMA1_CSELR_CH5_USART8_RX ((uint32_t)0x000F0000) /*!< Remap USART8 Rx on DMA1 channel 5 */
+#define DMA1_CSELR_CH6_I2C1_TX ((uint32_t)0x00200000) /*!< Remap I2C1 Tx on DMA1 channel 6 */
+#define DMA1_CSELR_CH6_SPI2_RX ((uint32_t)0x00300000) /*!< Remap SPI2 Rx on DMA1 channel 6 */
+#define DMA1_CSELR_CH6_TIM1_CH1 ((uint32_t)0x00400000) /*!< Remap TIM1 channel 1 on DMA1 channel 6 */
+#define DMA1_CSELR_CH6_TIM1_CH2 ((uint32_t)0x00400000) /*!< Remap TIM1 channel 2 on DMA1 channel 6 */
+#define DMA1_CSELR_CH6_TIM1_CH3 ((uint32_t)0x00400000) /*!< Remap TIM1 channel 3 on DMA1 channel 6 */
+#define DMA1_CSELR_CH6_TIM3_CH1 ((uint32_t)0x00600000) /*!< Remap TIM3 channel 1 on DMA1 channel 6 */
+#define DMA1_CSELR_CH6_TIM3_TRIG ((uint32_t)0x00600000) /*!< Remap TIM3 Trig on DMA1 channel 6 */
+#define DMA1_CSELR_CH6_TIM16_CH1 ((uint32_t)0x00700000) /*!< Remap TIM16 channel 1 on DMA1 channel 6 */
+#define DMA1_CSELR_CH6_TIM16_UP ((uint32_t)0x00700000) /*!< Remap TIM16 up on DMA1 channel 6 */
+#define DMA1_CSELR_CH6_USART1_RX ((uint32_t)0x00800000) /*!< Remap USART1 Rx on DMA1 channel 6 */
+#define DMA1_CSELR_CH6_USART2_RX ((uint32_t)0x00900000) /*!< Remap USART2 Rx on DMA1 channel 6 */
+#define DMA1_CSELR_CH6_USART3_RX ((uint32_t)0x00A00000) /*!< Remap USART3 Rx on DMA1 channel 6 */
+#define DMA1_CSELR_CH6_USART4_RX ((uint32_t)0x00B00000) /*!< Remap USART4 Rx on DMA1 channel 6 */
+#define DMA1_CSELR_CH6_USART5_RX ((uint32_t)0x00C00000) /*!< Remap USART5 Rx on DMA1 channel 6 */
+#define DMA1_CSELR_CH6_USART6_RX ((uint32_t)0x00D00000) /*!< Remap USART6 Rx on DMA1 channel 6 */
+#define DMA1_CSELR_CH6_USART7_RX ((uint32_t)0x00E00000) /*!< Remap USART7 Rx on DMA1 channel 6 */
+#define DMA1_CSELR_CH6_USART8_RX ((uint32_t)0x00F00000) /*!< Remap USART8 Rx on DMA1 channel 6 */
+#define DMA1_CSELR_CH7_I2C1_RX ((uint32_t)0x02000000) /*!< Remap I2C1 Rx on DMA1 channel 7 */
+#define DMA1_CSELR_CH7_SPI2_TX ((uint32_t)0x03000000) /*!< Remap SPI2 Tx on DMA1 channel 7 */
+#define DMA1_CSELR_CH7_TIM2_CH2 ((uint32_t)0x05000000) /*!< Remap TIM2 channel 2 on DMA1 channel 7 */
+#define DMA1_CSELR_CH7_TIM2_CH4 ((uint32_t)0x05000000) /*!< Remap TIM2 channel 4 on DMA1 channel 7 */
+#define DMA1_CSELR_CH7_TIM17_CH1 ((uint32_t)0x07000000) /*!< Remap TIM17 channel 1 on DMA1 channel 7 */
+#define DMA1_CSELR_CH7_TIM17_UP ((uint32_t)0x07000000) /*!< Remap TIM17 up on DMA1 channel 7 */
+#define DMA1_CSELR_CH7_USART1_TX ((uint32_t)0x08000000) /*!< Remap USART1 Tx on DMA1 channel 7 */
+#define DMA1_CSELR_CH7_USART2_TX ((uint32_t)0x09000000) /*!< Remap USART2 Tx on DMA1 channel 7 */
+#define DMA1_CSELR_CH7_USART3_TX ((uint32_t)0x0A000000) /*!< Remap USART3 Tx on DMA1 channel 7 */
+#define DMA1_CSELR_CH7_USART4_TX ((uint32_t)0x0B000000) /*!< Remap USART4 Tx on DMA1 channel 7 */
+#define DMA1_CSELR_CH7_USART5_TX ((uint32_t)0x0C000000) /*!< Remap USART5 Tx on DMA1 channel 7 */
+#define DMA1_CSELR_CH7_USART6_TX ((uint32_t)0x0D000000) /*!< Remap USART6 Tx on DMA1 channel 7 */
+#define DMA1_CSELR_CH7_USART7_TX ((uint32_t)0x0E000000) /*!< Remap USART7 Tx on DMA1 channel 7 */
+#define DMA1_CSELR_CH7_USART8_TX ((uint32_t)0x0F000000) /*!< Remap USART8 Tx on DMA1 channel 7 */
+
+/****************** Bit definition for DMA2_CSELR register ********************/
+#define DMA2_CSELR_DEFAULT ((uint32_t)0x00000000) /*!< Default remap position for DMA2 */
+#define DMA2_CSELR_CH1_I2C2_TX ((uint32_t)0x00000002) /*!< Remap I2C2 TX on DMA2 channel 1 */
+#define DMA2_CSELR_CH1_USART1_TX ((uint32_t)0x00000008) /*!< Remap USART1 Tx on DMA2 channel 1 */
+#define DMA2_CSELR_CH1_USART2_TX ((uint32_t)0x00000009) /*!< Remap USART2 Tx on DMA2 channel 1 */
+#define DMA2_CSELR_CH1_USART3_TX ((uint32_t)0x0000000A) /*!< Remap USART3 Tx on DMA2 channel 1 */
+#define DMA2_CSELR_CH1_USART4_TX ((uint32_t)0x0000000B) /*!< Remap USART4 Tx on DMA2 channel 1 */
+#define DMA2_CSELR_CH1_USART5_TX ((uint32_t)0x0000000C) /*!< Remap USART5 Tx on DMA2 channel 1 */
+#define DMA2_CSELR_CH1_USART6_TX ((uint32_t)0x0000000D) /*!< Remap USART6 Tx on DMA2 channel 1 */
+#define DMA2_CSELR_CH1_USART7_TX ((uint32_t)0x0000000E) /*!< Remap USART7 Tx on DMA2 channel 1 */
+#define DMA2_CSELR_CH1_USART8_TX ((uint32_t)0x0000000F) /*!< Remap USART8 Tx on DMA2 channel 1 */
+#define DMA2_CSELR_CH2_I2C2_RX ((uint32_t)0x00000020) /*!< Remap I2C2 Rx on DMA2 channel 2 */
+#define DMA2_CSELR_CH2_USART1_RX ((uint32_t)0x00000080) /*!< Remap USART1 Rx on DMA2 channel 2 */
+#define DMA2_CSELR_CH2_USART2_RX ((uint32_t)0x00000090) /*!< Remap USART2 Rx on DMA2 channel 2 */
+#define DMA2_CSELR_CH2_USART3_RX ((uint32_t)0x000000A0) /*!< Remap USART3 Rx on DMA2 channel 2 */
+#define DMA2_CSELR_CH2_USART4_RX ((uint32_t)0x000000B0) /*!< Remap USART4 Rx on DMA2 channel 2 */
+#define DMA2_CSELR_CH2_USART5_RX ((uint32_t)0x000000C0) /*!< Remap USART5 Rx on DMA2 channel 2 */
+#define DMA2_CSELR_CH2_USART6_RX ((uint32_t)0x000000D0) /*!< Remap USART6 Rx on DMA2 channel 2 */
+#define DMA2_CSELR_CH2_USART7_RX ((uint32_t)0x000000E0) /*!< Remap USART7 Rx on DMA2 channel 2 */
+#define DMA2_CSELR_CH2_USART8_RX ((uint32_t)0x000000F0) /*!< Remap USART8 Rx on DMA2 channel 2 */
+#define DMA2_CSELR_CH3_TIM6_UP ((uint32_t)0x00000100) /*!< Remap TIM6 up on DMA2 channel 3 */
+#define DMA2_CSELR_CH3_DAC_CH1 ((uint32_t)0x00000100) /*!< Remap DAC channel 1 on DMA2 channel 3 */
+#define DMA2_CSELR_CH3_SPI1_RX ((uint32_t)0x00000300) /*!< Remap SPI1 Rx on DMA2 channel 3 */
+#define DMA2_CSELR_CH3_USART1_RX ((uint32_t)0x00000800) /*!< Remap USART1 Rx on DMA2 channel 3 */
+#define DMA2_CSELR_CH3_USART2_RX ((uint32_t)0x00000900) /*!< Remap USART2 Rx on DMA2 channel 3 */
+#define DMA2_CSELR_CH3_USART3_RX ((uint32_t)0x00000A00) /*!< Remap USART3 Rx on DMA2 channel 3 */
+#define DMA2_CSELR_CH3_USART4_RX ((uint32_t)0x00000B00) /*!< Remap USART4 Rx on DMA2 channel 3 */
+#define DMA2_CSELR_CH3_USART5_RX ((uint32_t)0x00000C00) /*!< Remap USART5 Rx on DMA2 channel 3 */
+#define DMA2_CSELR_CH3_USART6_RX ((uint32_t)0x00000D00) /*!< Remap USART6 Rx on DMA2 channel 3 */
+#define DMA2_CSELR_CH3_USART7_RX ((uint32_t)0x00000E00) /*!< Remap USART7 Rx on DMA2 channel 3 */
+#define DMA2_CSELR_CH3_USART8_RX ((uint32_t)0x00000F00) /*!< Remap USART8 Rx on DMA2 channel 3 */
+#define DMA2_CSELR_CH4_TIM7_UP ((uint32_t)0x00001000) /*!< Remap TIM7 up on DMA2 channel 4 */
+#define DMA2_CSELR_CH4_DAC_CH2 ((uint32_t)0x00001000) /*!< Remap DAC channel 2 on DMA2 channel 4 */
+#define DMA2_CSELR_CH4_SPI1_TX ((uint32_t)0x00003000) /*!< Remap SPI1 Tx on DMA2 channel 4 */
+#define DMA2_CSELR_CH4_USART1_TX ((uint32_t)0x00008000) /*!< Remap USART1 Tx on DMA2 channel 4 */
+#define DMA2_CSELR_CH4_USART2_TX ((uint32_t)0x00009000) /*!< Remap USART2 Tx on DMA2 channel 4 */
+#define DMA2_CSELR_CH4_USART3_TX ((uint32_t)0x0000A000) /*!< Remap USART3 Tx on DMA2 channel 4 */
+#define DMA2_CSELR_CH4_USART4_TX ((uint32_t)0x0000B000) /*!< Remap USART4 Tx on DMA2 channel 4 */
+#define DMA2_CSELR_CH4_USART5_TX ((uint32_t)0x0000C000) /*!< Remap USART5 Tx on DMA2 channel 4 */
+#define DMA2_CSELR_CH4_USART6_TX ((uint32_t)0x0000D000) /*!< Remap USART6 Tx on DMA2 channel 4 */
+#define DMA2_CSELR_CH4_USART7_TX ((uint32_t)0x0000E000) /*!< Remap USART7 Tx on DMA2 channel 4 */
+#define DMA2_CSELR_CH4_USART8_TX ((uint32_t)0x0000F000) /*!< Remap USART8 Tx on DMA2 channel 4 */
+#define DMA2_CSELR_CH5_ADC ((uint32_t)0x00010000) /*!< Remap ADC on DMA2 channel 5 */
+#define DMA2_CSELR_CH5_USART1_TX ((uint32_t)0x00080000) /*!< Remap USART1 Tx on DMA2 channel 5 */
+#define DMA2_CSELR_CH5_USART2_TX ((uint32_t)0x00090000) /*!< Remap USART2 Tx on DMA2 channel 5 */
+#define DMA2_CSELR_CH5_USART3_TX ((uint32_t)0x000A0000) /*!< Remap USART3 Tx on DMA2 channel 5 */
+#define DMA2_CSELR_CH5_USART4_TX ((uint32_t)0x000B0000) /*!< Remap USART4 Tx on DMA2 channel 5 */
+#define DMA2_CSELR_CH5_USART5_TX ((uint32_t)0x000C0000) /*!< Remap USART5 Tx on DMA2 channel 5 */
+#define DMA2_CSELR_CH5_USART6_TX ((uint32_t)0x000D0000) /*!< Remap USART6 Tx on DMA2 channel 5 */
+#define DMA2_CSELR_CH5_USART7_TX ((uint32_t)0x000E0000) /*!< Remap USART7 Tx on DMA2 channel 5 */
+#define DMA2_CSELR_CH5_USART8_TX ((uint32_t)0x000F0000) /*!< Remap USART8 Tx on DMA2 channel 5 */
+
+/******************************************************************************/
+/* */
+/* External Interrupt/Event Controller (EXTI) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for EXTI_IMR register *******************/
+#define EXTI_IMR_MR0 ((uint32_t)0x00000001) /*!< Interrupt Mask on line 0 */
+#define EXTI_IMR_MR1 ((uint32_t)0x00000002) /*!< Interrupt Mask on line 1 */
+#define EXTI_IMR_MR2 ((uint32_t)0x00000004) /*!< Interrupt Mask on line 2 */
+#define EXTI_IMR_MR3 ((uint32_t)0x00000008) /*!< Interrupt Mask on line 3 */
+#define EXTI_IMR_MR4 ((uint32_t)0x00000010) /*!< Interrupt Mask on line 4 */
+#define EXTI_IMR_MR5 ((uint32_t)0x00000020) /*!< Interrupt Mask on line 5 */
+#define EXTI_IMR_MR6 ((uint32_t)0x00000040) /*!< Interrupt Mask on line 6 */
+#define EXTI_IMR_MR7 ((uint32_t)0x00000080) /*!< Interrupt Mask on line 7 */
+#define EXTI_IMR_MR8 ((uint32_t)0x00000100) /*!< Interrupt Mask on line 8 */
+#define EXTI_IMR_MR9 ((uint32_t)0x00000200) /*!< Interrupt Mask on line 9 */
+#define EXTI_IMR_MR10 ((uint32_t)0x00000400) /*!< Interrupt Mask on line 10 */
+#define EXTI_IMR_MR11 ((uint32_t)0x00000800) /*!< Interrupt Mask on line 11 */
+#define EXTI_IMR_MR12 ((uint32_t)0x00001000) /*!< Interrupt Mask on line 12 */
+#define EXTI_IMR_MR13 ((uint32_t)0x00002000) /*!< Interrupt Mask on line 13 */
+#define EXTI_IMR_MR14 ((uint32_t)0x00004000) /*!< Interrupt Mask on line 14 */
+#define EXTI_IMR_MR15 ((uint32_t)0x00008000) /*!< Interrupt Mask on line 15 */
+#define EXTI_IMR_MR16 ((uint32_t)0x00010000) /*!< Interrupt Mask on line 16 */
+#define EXTI_IMR_MR17 ((uint32_t)0x00020000) /*!< Interrupt Mask on line 17 */
+#define EXTI_IMR_MR19 ((uint32_t)0x00080000) /*!< Interrupt Mask on line 19 */
+#define EXTI_IMR_MR21 ((uint32_t)0x00200000) /*!< Interrupt Mask on line 21 */
+#define EXTI_IMR_MR22 ((uint32_t)0x00400000) /*!< Interrupt Mask on line 22 */
+#define EXTI_IMR_MR23 ((uint32_t)0x00800000) /*!< Interrupt Mask on line 23 */
+#define EXTI_IMR_MR25 ((uint32_t)0x02000000) /*!< Interrupt Mask on line 25 */
+#define EXTI_IMR_MR27 ((uint32_t)0x08000000) /*!< Interrupt Mask on line 27 */
+
+/****************** Bit definition for EXTI_EMR register ********************/
+#define EXTI_EMR_MR0 ((uint32_t)0x00000001) /*!< Event Mask on line 0 */
+#define EXTI_EMR_MR1 ((uint32_t)0x00000002) /*!< Event Mask on line 1 */
+#define EXTI_EMR_MR2 ((uint32_t)0x00000004) /*!< Event Mask on line 2 */
+#define EXTI_EMR_MR3 ((uint32_t)0x00000008) /*!< Event Mask on line 3 */
+#define EXTI_EMR_MR4 ((uint32_t)0x00000010) /*!< Event Mask on line 4 */
+#define EXTI_EMR_MR5 ((uint32_t)0x00000020) /*!< Event Mask on line 5 */
+#define EXTI_EMR_MR6 ((uint32_t)0x00000040) /*!< Event Mask on line 6 */
+#define EXTI_EMR_MR7 ((uint32_t)0x00000080) /*!< Event Mask on line 7 */
+#define EXTI_EMR_MR8 ((uint32_t)0x00000100) /*!< Event Mask on line 8 */
+#define EXTI_EMR_MR9 ((uint32_t)0x00000200) /*!< Event Mask on line 9 */
+#define EXTI_EMR_MR10 ((uint32_t)0x00000400) /*!< Event Mask on line 10 */
+#define EXTI_EMR_MR11 ((uint32_t)0x00000800) /*!< Event Mask on line 11 */
+#define EXTI_EMR_MR12 ((uint32_t)0x00001000) /*!< Event Mask on line 12 */
+#define EXTI_EMR_MR13 ((uint32_t)0x00002000) /*!< Event Mask on line 13 */
+#define EXTI_EMR_MR14 ((uint32_t)0x00004000) /*!< Event Mask on line 14 */
+#define EXTI_EMR_MR15 ((uint32_t)0x00008000) /*!< Event Mask on line 15 */
+#define EXTI_EMR_MR16 ((uint32_t)0x00010000) /*!< Event Mask on line 16 */
+#define EXTI_EMR_MR17 ((uint32_t)0x00020000) /*!< Event Mask on line 17 */
+#define EXTI_EMR_MR19 ((uint32_t)0x00080000) /*!< Event Mask on line 19 */
+#define EXTI_EMR_MR21 ((uint32_t)0x00200000) /*!< Event Mask on line 21 */
+#define EXTI_EMR_MR22 ((uint32_t)0x00400000) /*!< Event Mask on line 22 */
+#define EXTI_EMR_MR23 ((uint32_t)0x00800000) /*!< Event Mask on line 23 */
+#define EXTI_EMR_MR25 ((uint32_t)0x02000000) /*!< Event Mask on line 25 */
+#define EXTI_EMR_MR27 ((uint32_t)0x08000000) /*!< Event Mask on line 27 */
+
+/******************* Bit definition for EXTI_RTSR register ******************/
+#define EXTI_RTSR_TR0 ((uint32_t)0x00000001) /*!< Rising trigger event configuration bit of line 0 */
+#define EXTI_RTSR_TR1 ((uint32_t)0x00000002) /*!< Rising trigger event configuration bit of line 1 */
+#define EXTI_RTSR_TR2 ((uint32_t)0x00000004) /*!< Rising trigger event configuration bit of line 2 */
+#define EXTI_RTSR_TR3 ((uint32_t)0x00000008) /*!< Rising trigger event configuration bit of line 3 */
+#define EXTI_RTSR_TR4 ((uint32_t)0x00000010) /*!< Rising trigger event configuration bit of line 4 */
+#define EXTI_RTSR_TR5 ((uint32_t)0x00000020) /*!< Rising trigger event configuration bit of line 5 */
+#define EXTI_RTSR_TR6 ((uint32_t)0x00000040) /*!< Rising trigger event configuration bit of line 6 */
+#define EXTI_RTSR_TR7 ((uint32_t)0x00000080) /*!< Rising trigger event configuration bit of line 7 */
+#define EXTI_RTSR_TR8 ((uint32_t)0x00000100) /*!< Rising trigger event configuration bit of line 8 */
+#define EXTI_RTSR_TR9 ((uint32_t)0x00000200) /*!< Rising trigger event configuration bit of line 9 */
+#define EXTI_RTSR_TR10 ((uint32_t)0x00000400) /*!< Rising trigger event configuration bit of line 10 */
+#define EXTI_RTSR_TR11 ((uint32_t)0x00000800) /*!< Rising trigger event configuration bit of line 11 */
+#define EXTI_RTSR_TR12 ((uint32_t)0x00001000) /*!< Rising trigger event configuration bit of line 12 */
+#define EXTI_RTSR_TR13 ((uint32_t)0x00002000) /*!< Rising trigger event configuration bit of line 13 */
+#define EXTI_RTSR_TR14 ((uint32_t)0x00004000) /*!< Rising trigger event configuration bit of line 14 */
+#define EXTI_RTSR_TR15 ((uint32_t)0x00008000) /*!< Rising trigger event configuration bit of line 15 */
+#define EXTI_RTSR_TR16 ((uint32_t)0x00010000) /*!< Rising trigger event configuration bit of line 16 */
+#define EXTI_RTSR_TR17 ((uint32_t)0x00020000) /*!< Rising trigger event configuration bit of line 17 */
+#define EXTI_RTSR_TR19 ((uint32_t)0x00080000) /*!< Rising trigger event configuration bit of line 19 */
+
+/******************* Bit definition for EXTI_FTSR register *******************/
+#define EXTI_FTSR_TR0 ((uint32_t)0x00000001) /*!< Falling trigger event configuration bit of line 0 */
+#define EXTI_FTSR_TR1 ((uint32_t)0x00000002) /*!< Falling trigger event configuration bit of line 1 */
+#define EXTI_FTSR_TR2 ((uint32_t)0x00000004) /*!< Falling trigger event configuration bit of line 2 */
+#define EXTI_FTSR_TR3 ((uint32_t)0x00000008) /*!< Falling trigger event configuration bit of line 3 */
+#define EXTI_FTSR_TR4 ((uint32_t)0x00000010) /*!< Falling trigger event configuration bit of line 4 */
+#define EXTI_FTSR_TR5 ((uint32_t)0x00000020) /*!< Falling trigger event configuration bit of line 5 */
+#define EXTI_FTSR_TR6 ((uint32_t)0x00000040) /*!< Falling trigger event configuration bit of line 6 */
+#define EXTI_FTSR_TR7 ((uint32_t)0x00000080) /*!< Falling trigger event configuration bit of line 7 */
+#define EXTI_FTSR_TR8 ((uint32_t)0x00000100) /*!< Falling trigger event configuration bit of line 8 */
+#define EXTI_FTSR_TR9 ((uint32_t)0x00000200) /*!< Falling trigger event configuration bit of line 9 */
+#define EXTI_FTSR_TR10 ((uint32_t)0x00000400) /*!< Falling trigger event configuration bit of line 10 */
+#define EXTI_FTSR_TR11 ((uint32_t)0x00000800) /*!< Falling trigger event configuration bit of line 11 */
+#define EXTI_FTSR_TR12 ((uint32_t)0x00001000) /*!< Falling trigger event configuration bit of line 12 */
+#define EXTI_FTSR_TR13 ((uint32_t)0x00002000) /*!< Falling trigger event configuration bit of line 13 */
+#define EXTI_FTSR_TR14 ((uint32_t)0x00004000) /*!< Falling trigger event configuration bit of line 14 */
+#define EXTI_FTSR_TR15 ((uint32_t)0x00008000) /*!< Falling trigger event configuration bit of line 15 */
+#define EXTI_FTSR_TR16 ((uint32_t)0x00010000) /*!< Falling trigger event configuration bit of line 16 */
+#define EXTI_FTSR_TR17 ((uint32_t)0x00020000) /*!< Falling trigger event configuration bit of line 17 */
+#define EXTI_FTSR_TR19 ((uint32_t)0x00080000) /*!< Falling trigger event configuration bit of line 19 */
+
+/******************* Bit definition for EXTI_SWIER register *******************/
+#define EXTI_SWIER_SWIER0 ((uint32_t)0x00000001) /*!< Software Interrupt on line 0 */
+#define EXTI_SWIER_SWIER1 ((uint32_t)0x00000002) /*!< Software Interrupt on line 1 */
+#define EXTI_SWIER_SWIER2 ((uint32_t)0x00000004) /*!< Software Interrupt on line 2 */
+#define EXTI_SWIER_SWIER3 ((uint32_t)0x00000008) /*!< Software Interrupt on line 3 */
+#define EXTI_SWIER_SWIER4 ((uint32_t)0x00000010) /*!< Software Interrupt on line 4 */
+#define EXTI_SWIER_SWIER5 ((uint32_t)0x00000020) /*!< Software Interrupt on line 5 */
+#define EXTI_SWIER_SWIER6 ((uint32_t)0x00000040) /*!< Software Interrupt on line 6 */
+#define EXTI_SWIER_SWIER7 ((uint32_t)0x00000080) /*!< Software Interrupt on line 7 */
+#define EXTI_SWIER_SWIER8 ((uint32_t)0x00000100) /*!< Software Interrupt on line 8 */
+#define EXTI_SWIER_SWIER9 ((uint32_t)0x00000200) /*!< Software Interrupt on line 9 */
+#define EXTI_SWIER_SWIER10 ((uint32_t)0x00000400) /*!< Software Interrupt on line 10 */
+#define EXTI_SWIER_SWIER11 ((uint32_t)0x00000800) /*!< Software Interrupt on line 11 */
+#define EXTI_SWIER_SWIER12 ((uint32_t)0x00001000) /*!< Software Interrupt on line 12 */
+#define EXTI_SWIER_SWIER13 ((uint32_t)0x00002000) /*!< Software Interrupt on line 13 */
+#define EXTI_SWIER_SWIER14 ((uint32_t)0x00004000) /*!< Software Interrupt on line 14 */
+#define EXTI_SWIER_SWIER15 ((uint32_t)0x00008000) /*!< Software Interrupt on line 15 */
+#define EXTI_SWIER_SWIER16 ((uint32_t)0x00010000) /*!< Software Interrupt on line 16 */
+#define EXTI_SWIER_SWIER17 ((uint32_t)0x00020000) /*!< Software Interrupt on line 17 */
+#define EXTI_SWIER_SWIER19 ((uint32_t)0x00080000) /*!< Software Interrupt on line 19 */
+
+/****************** Bit definition for EXTI_PR register *********************/
+#define EXTI_PR_PR0 ((uint32_t)0x00000001) /*!< Pending bit 0 */
+#define EXTI_PR_PR1 ((uint32_t)0x00000002) /*!< Pending bit 1 */
+#define EXTI_PR_PR2 ((uint32_t)0x00000004) /*!< Pending bit 2 */
+#define EXTI_PR_PR3 ((uint32_t)0x00000008) /*!< Pending bit 3 */
+#define EXTI_PR_PR4 ((uint32_t)0x00000010) /*!< Pending bit 4 */
+#define EXTI_PR_PR5 ((uint32_t)0x00000020) /*!< Pending bit 5 */
+#define EXTI_PR_PR6 ((uint32_t)0x00000040) /*!< Pending bit 6 */
+#define EXTI_PR_PR7 ((uint32_t)0x00000080) /*!< Pending bit 7 */
+#define EXTI_PR_PR8 ((uint32_t)0x00000100) /*!< Pending bit 8 */
+#define EXTI_PR_PR9 ((uint32_t)0x00000200) /*!< Pending bit 9 */
+#define EXTI_PR_PR10 ((uint32_t)0x00000400) /*!< Pending bit 10 */
+#define EXTI_PR_PR11 ((uint32_t)0x00000800) /*!< Pending bit 11 */
+#define EXTI_PR_PR12 ((uint32_t)0x00001000) /*!< Pending bit 12 */
+#define EXTI_PR_PR13 ((uint32_t)0x00002000) /*!< Pending bit 13 */
+#define EXTI_PR_PR14 ((uint32_t)0x00004000) /*!< Pending bit 14 */
+#define EXTI_PR_PR15 ((uint32_t)0x00008000) /*!< Pending bit 15 */
+#define EXTI_PR_PR16 ((uint32_t)0x00010000) /*!< Pending bit 16 */
+#define EXTI_PR_PR17 ((uint32_t)0x00020000) /*!< Pending bit 17 */
+#define EXTI_PR_PR19 ((uint32_t)0x00080000) /*!< Pending bit 19 */
+
+/******************************************************************************/
+/* */
+/* FLASH and Option Bytes Registers */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for FLASH_ACR register ******************/
+#define FLASH_ACR_LATENCY ((uint32_t)0x00000001) /*!< LATENCY bit (Latency) */
+
+#define FLASH_ACR_PRFTBE ((uint32_t)0x00000010) /*!< Prefetch Buffer Enable */
+#define FLASH_ACR_PRFTBS ((uint32_t)0x00000020) /*!< Prefetch Buffer Status */
+
+/****************** Bit definition for FLASH_KEYR register ******************/
+#define FLASH_KEYR_FKEYR ((uint32_t)0xFFFFFFFF) /*!< FPEC Key */
+
+/***************** Bit definition for FLASH_OPTKEYR register ****************/
+#define FLASH_OPTKEYR_OPTKEYR ((uint32_t)0xFFFFFFFF) /*!< Option Byte Key */
+
+/****************** FLASH Keys **********************************************/
+#define FLASH_FKEY1 ((uint32_t)0x45670123) /*!< Flash program erase key1 */
+#define FLASH_FKEY2 ((uint32_t)0xCDEF89AB) /*!< Flash program erase key2: used with FLASH_PEKEY1
+ to unlock the write access to the FPEC. */
+
+#define FLASH_OPTKEY1 ((uint32_t)0x45670123) /*!< Flash option key1 */
+#define FLASH_OPTKEY2 ((uint32_t)0xCDEF89AB) /*!< Flash option key2: used with FLASH_OPTKEY1 to
+ unlock the write access to the option byte block */
+
+/****************** Bit definition for FLASH_SR register *******************/
+#define FLASH_SR_BSY ((uint32_t)0x00000001) /*!< Busy */
+#define FLASH_SR_PGERR ((uint32_t)0x00000004) /*!< Programming Error */
+#define FLASH_SR_WRPRTERR ((uint32_t)0x00000010) /*!< Write Protection Error */
+#define FLASH_SR_EOP ((uint32_t)0x00000020) /*!< End of operation */
+#define FLASH_SR_WRPERR FLASH_SR_WRPRTERR /*!< Legacy of Write Protection Error */
+
+/******************* Bit definition for FLASH_CR register *******************/
+#define FLASH_CR_PG ((uint32_t)0x00000001) /*!< Programming */
+#define FLASH_CR_PER ((uint32_t)0x00000002) /*!< Page Erase */
+#define FLASH_CR_MER ((uint32_t)0x00000004) /*!< Mass Erase */
+#define FLASH_CR_OPTPG ((uint32_t)0x00000010) /*!< Option Byte Programming */
+#define FLASH_CR_OPTER ((uint32_t)0x00000020) /*!< Option Byte Erase */
+#define FLASH_CR_STRT ((uint32_t)0x00000040) /*!< Start */
+#define FLASH_CR_LOCK ((uint32_t)0x00000080) /*!< Lock */
+#define FLASH_CR_OPTWRE ((uint32_t)0x00000200) /*!< Option Bytes Write Enable */
+#define FLASH_CR_ERRIE ((uint32_t)0x00000400) /*!< Error Interrupt Enable */
+#define FLASH_CR_EOPIE ((uint32_t)0x00001000) /*!< End of operation interrupt enable */
+#define FLASH_CR_OBL_LAUNCH ((uint32_t)0x00002000) /*!< Option Bytes Loader Launch */
+
+/******************* Bit definition for FLASH_AR register *******************/
+#define FLASH_AR_FAR ((uint32_t)0xFFFFFFFF) /*!< Flash Address */
+
+/****************** Bit definition for FLASH_OBR register *******************/
+#define FLASH_OBR_OPTERR ((uint32_t)0x00000001) /*!< Option Byte Error */
+#define FLASH_OBR_RDPRT1 ((uint32_t)0x00000002) /*!< Read protection Level 1 */
+#define FLASH_OBR_RDPRT2 ((uint32_t)0x00000004) /*!< Read protection Level 2 */
+
+#define FLASH_OBR_USER ((uint32_t)0x00003700) /*!< User Option Bytes */
+#define FLASH_OBR_IWDG_SW ((uint32_t)0x00000100) /*!< IWDG SW */
+#define FLASH_OBR_nRST_STOP ((uint32_t)0x00000200) /*!< nRST_STOP */
+#define FLASH_OBR_nRST_STDBY ((uint32_t)0x00000400) /*!< nRST_STDBY */
+#define FLASH_OBR_nBOOT1 ((uint32_t)0x00001000) /*!< nBOOT1 */
+#define FLASH_OBR_VDDA_MONITOR ((uint32_t)0x00002000) /*!< VDDA power supply supervisor */
+
+/* Old BOOT1 bit definition, maintained for legacy purpose */
+#define FLASH_OBR_BOOT1 FLASH_OBR_nBOOT1
+
+/* Old OBR_VDDA bit definition, maintained for legacy purpose */
+#define FLASH_OBR_VDDA_ANALOG FLASH_OBR_VDDA_MONITOR
+
+/****************** Bit definition for FLASH_WRPR register ******************/
+#define FLASH_WRPR_WRP ((uint32_t)0x0000FFFF) /*!< Write Protect */
+
+/*----------------------------------------------------------------------------*/
+
+/****************** Bit definition for OB_RDP register **********************/
+#define OB_RDP_RDP ((uint32_t)0x000000FF) /*!< Read protection option byte */
+#define OB_RDP_nRDP ((uint32_t)0x0000FF00) /*!< Read protection complemented option byte */
+
+/****************** Bit definition for OB_USER register *********************/
+#define OB_USER_USER ((uint32_t)0x00FF0000) /*!< User option byte */
+#define OB_USER_nUSER ((uint32_t)0xFF000000) /*!< User complemented option byte */
+
+/****************** Bit definition for OB_WRP0 register *********************/
+#define OB_WRP0_WRP0 ((uint32_t)0x000000FF) /*!< Flash memory write protection option bytes */
+#define OB_WRP0_nWRP0 ((uint32_t)0x0000FF00) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for OB_WRP1 register *********************/
+#define OB_WRP1_WRP1 ((uint32_t)0x00FF0000) /*!< Flash memory write protection option bytes */
+#define OB_WRP1_nWRP1 ((uint32_t)0xFF000000) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for OB_WRP2 register *********************/
+#define OB_WRP2_WRP2 ((uint32_t)0x000000FF) /*!< Flash memory write protection option bytes */
+#define OB_WRP2_nWRP2 ((uint32_t)0x0000FF00) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for OB_WRP3 register *********************/
+#define OB_WRP3_WRP3 ((uint32_t)0x00FF0000) /*!< Flash memory write protection option bytes */
+#define OB_WRP3_nWRP3 ((uint32_t)0xFF000000) /*!< Flash memory write protection complemented option bytes */
+
+/******************************************************************************/
+/* */
+/* General Purpose IOs (GPIO) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for GPIO_MODER register *****************/
+#define GPIO_MODER_MODER0 ((uint32_t)0x00000003)
+#define GPIO_MODER_MODER0_0 ((uint32_t)0x00000001)
+#define GPIO_MODER_MODER0_1 ((uint32_t)0x00000002)
+#define GPIO_MODER_MODER1 ((uint32_t)0x0000000C)
+#define GPIO_MODER_MODER1_0 ((uint32_t)0x00000004)
+#define GPIO_MODER_MODER1_1 ((uint32_t)0x00000008)
+#define GPIO_MODER_MODER2 ((uint32_t)0x00000030)
+#define GPIO_MODER_MODER2_0 ((uint32_t)0x00000010)
+#define GPIO_MODER_MODER2_1 ((uint32_t)0x00000020)
+#define GPIO_MODER_MODER3 ((uint32_t)0x000000C0)
+#define GPIO_MODER_MODER3_0 ((uint32_t)0x00000040)
+#define GPIO_MODER_MODER3_1 ((uint32_t)0x00000080)
+#define GPIO_MODER_MODER4 ((uint32_t)0x00000300)
+#define GPIO_MODER_MODER4_0 ((uint32_t)0x00000100)
+#define GPIO_MODER_MODER4_1 ((uint32_t)0x00000200)
+#define GPIO_MODER_MODER5 ((uint32_t)0x00000C00)
+#define GPIO_MODER_MODER5_0 ((uint32_t)0x00000400)
+#define GPIO_MODER_MODER5_1 ((uint32_t)0x00000800)
+#define GPIO_MODER_MODER6 ((uint32_t)0x00003000)
+#define GPIO_MODER_MODER6_0 ((uint32_t)0x00001000)
+#define GPIO_MODER_MODER6_1 ((uint32_t)0x00002000)
+#define GPIO_MODER_MODER7 ((uint32_t)0x0000C000)
+#define GPIO_MODER_MODER7_0 ((uint32_t)0x00004000)
+#define GPIO_MODER_MODER7_1 ((uint32_t)0x00008000)
+#define GPIO_MODER_MODER8 ((uint32_t)0x00030000)
+#define GPIO_MODER_MODER8_0 ((uint32_t)0x00010000)
+#define GPIO_MODER_MODER8_1 ((uint32_t)0x00020000)
+#define GPIO_MODER_MODER9 ((uint32_t)0x000C0000)
+#define GPIO_MODER_MODER9_0 ((uint32_t)0x00040000)
+#define GPIO_MODER_MODER9_1 ((uint32_t)0x00080000)
+#define GPIO_MODER_MODER10 ((uint32_t)0x00300000)
+#define GPIO_MODER_MODER10_0 ((uint32_t)0x00100000)
+#define GPIO_MODER_MODER10_1 ((uint32_t)0x00200000)
+#define GPIO_MODER_MODER11 ((uint32_t)0x00C00000)
+#define GPIO_MODER_MODER11_0 ((uint32_t)0x00400000)
+#define GPIO_MODER_MODER11_1 ((uint32_t)0x00800000)
+#define GPIO_MODER_MODER12 ((uint32_t)0x03000000)
+#define GPIO_MODER_MODER12_0 ((uint32_t)0x01000000)
+#define GPIO_MODER_MODER12_1 ((uint32_t)0x02000000)
+#define GPIO_MODER_MODER13 ((uint32_t)0x0C000000)
+#define GPIO_MODER_MODER13_0 ((uint32_t)0x04000000)
+#define GPIO_MODER_MODER13_1 ((uint32_t)0x08000000)
+#define GPIO_MODER_MODER14 ((uint32_t)0x30000000)
+#define GPIO_MODER_MODER14_0 ((uint32_t)0x10000000)
+#define GPIO_MODER_MODER14_1 ((uint32_t)0x20000000)
+#define GPIO_MODER_MODER15 ((uint32_t)0xC0000000)
+#define GPIO_MODER_MODER15_0 ((uint32_t)0x40000000)
+#define GPIO_MODER_MODER15_1 ((uint32_t)0x80000000)
+
+/****************** Bit definition for GPIO_OTYPER register *****************/
+#define GPIO_OTYPER_OT_0 ((uint32_t)0x00000001)
+#define GPIO_OTYPER_OT_1 ((uint32_t)0x00000002)
+#define GPIO_OTYPER_OT_2 ((uint32_t)0x00000004)
+#define GPIO_OTYPER_OT_3 ((uint32_t)0x00000008)
+#define GPIO_OTYPER_OT_4 ((uint32_t)0x00000010)
+#define GPIO_OTYPER_OT_5 ((uint32_t)0x00000020)
+#define GPIO_OTYPER_OT_6 ((uint32_t)0x00000040)
+#define GPIO_OTYPER_OT_7 ((uint32_t)0x00000080)
+#define GPIO_OTYPER_OT_8 ((uint32_t)0x00000100)
+#define GPIO_OTYPER_OT_9 ((uint32_t)0x00000200)
+#define GPIO_OTYPER_OT_10 ((uint32_t)0x00000400)
+#define GPIO_OTYPER_OT_11 ((uint32_t)0x00000800)
+#define GPIO_OTYPER_OT_12 ((uint32_t)0x00001000)
+#define GPIO_OTYPER_OT_13 ((uint32_t)0x00002000)
+#define GPIO_OTYPER_OT_14 ((uint32_t)0x00004000)
+#define GPIO_OTYPER_OT_15 ((uint32_t)0x00008000)
+
+/**************** Bit definition for GPIO_OSPEEDR register ******************/
+#define GPIO_OSPEEDR_OSPEEDR0 ((uint32_t)0x00000003)
+#define GPIO_OSPEEDR_OSPEEDR0_0 ((uint32_t)0x00000001)
+#define GPIO_OSPEEDR_OSPEEDR0_1 ((uint32_t)0x00000002)
+#define GPIO_OSPEEDR_OSPEEDR1 ((uint32_t)0x0000000C)
+#define GPIO_OSPEEDR_OSPEEDR1_0 ((uint32_t)0x00000004)
+#define GPIO_OSPEEDR_OSPEEDR1_1 ((uint32_t)0x00000008)
+#define GPIO_OSPEEDR_OSPEEDR2 ((uint32_t)0x00000030)
+#define GPIO_OSPEEDR_OSPEEDR2_0 ((uint32_t)0x00000010)
+#define GPIO_OSPEEDR_OSPEEDR2_1 ((uint32_t)0x00000020)
+#define GPIO_OSPEEDR_OSPEEDR3 ((uint32_t)0x000000C0)
+#define GPIO_OSPEEDR_OSPEEDR3_0 ((uint32_t)0x00000040)
+#define GPIO_OSPEEDR_OSPEEDR3_1 ((uint32_t)0x00000080)
+#define GPIO_OSPEEDR_OSPEEDR4 ((uint32_t)0x00000300)
+#define GPIO_OSPEEDR_OSPEEDR4_0 ((uint32_t)0x00000100)
+#define GPIO_OSPEEDR_OSPEEDR4_1 ((uint32_t)0x00000200)
+#define GPIO_OSPEEDR_OSPEEDR5 ((uint32_t)0x00000C00)
+#define GPIO_OSPEEDR_OSPEEDR5_0 ((uint32_t)0x00000400)
+#define GPIO_OSPEEDR_OSPEEDR5_1 ((uint32_t)0x00000800)
+#define GPIO_OSPEEDR_OSPEEDR6 ((uint32_t)0x00003000)
+#define GPIO_OSPEEDR_OSPEEDR6_0 ((uint32_t)0x00001000)
+#define GPIO_OSPEEDR_OSPEEDR6_1 ((uint32_t)0x00002000)
+#define GPIO_OSPEEDR_OSPEEDR7 ((uint32_t)0x0000C000)
+#define GPIO_OSPEEDR_OSPEEDR7_0 ((uint32_t)0x00004000)
+#define GPIO_OSPEEDR_OSPEEDR7_1 ((uint32_t)0x00008000)
+#define GPIO_OSPEEDR_OSPEEDR8 ((uint32_t)0x00030000)
+#define GPIO_OSPEEDR_OSPEEDR8_0 ((uint32_t)0x00010000)
+#define GPIO_OSPEEDR_OSPEEDR8_1 ((uint32_t)0x00020000)
+#define GPIO_OSPEEDR_OSPEEDR9 ((uint32_t)0x000C0000)
+#define GPIO_OSPEEDR_OSPEEDR9_0 ((uint32_t)0x00040000)
+#define GPIO_OSPEEDR_OSPEEDR9_1 ((uint32_t)0x00080000)
+#define GPIO_OSPEEDR_OSPEEDR10 ((uint32_t)0x00300000)
+#define GPIO_OSPEEDR_OSPEEDR10_0 ((uint32_t)0x00100000)
+#define GPIO_OSPEEDR_OSPEEDR10_1 ((uint32_t)0x00200000)
+#define GPIO_OSPEEDR_OSPEEDR11 ((uint32_t)0x00C00000)
+#define GPIO_OSPEEDR_OSPEEDR11_0 ((uint32_t)0x00400000)
+#define GPIO_OSPEEDR_OSPEEDR11_1 ((uint32_t)0x00800000)
+#define GPIO_OSPEEDR_OSPEEDR12 ((uint32_t)0x03000000)
+#define GPIO_OSPEEDR_OSPEEDR12_0 ((uint32_t)0x01000000)
+#define GPIO_OSPEEDR_OSPEEDR12_1 ((uint32_t)0x02000000)
+#define GPIO_OSPEEDR_OSPEEDR13 ((uint32_t)0x0C000000)
+#define GPIO_OSPEEDR_OSPEEDR13_0 ((uint32_t)0x04000000)
+#define GPIO_OSPEEDR_OSPEEDR13_1 ((uint32_t)0x08000000)
+#define GPIO_OSPEEDR_OSPEEDR14 ((uint32_t)0x30000000)
+#define GPIO_OSPEEDR_OSPEEDR14_0 ((uint32_t)0x10000000)
+#define GPIO_OSPEEDR_OSPEEDR14_1 ((uint32_t)0x20000000)
+#define GPIO_OSPEEDR_OSPEEDR15 ((uint32_t)0xC0000000)
+#define GPIO_OSPEEDR_OSPEEDR15_0 ((uint32_t)0x40000000)
+#define GPIO_OSPEEDR_OSPEEDR15_1 ((uint32_t)0x80000000)
+
+/* Old Bit definition for GPIO_OSPEEDR register maintained for legacy purpose */
+#define GPIO_OSPEEDER_OSPEEDR0 GPIO_OSPEEDR_OSPEEDR0
+#define GPIO_OSPEEDER_OSPEEDR0_0 GPIO_OSPEEDR_OSPEEDR0_0
+#define GPIO_OSPEEDER_OSPEEDR0_1 GPIO_OSPEEDR_OSPEEDR0_1
+#define GPIO_OSPEEDER_OSPEEDR1 GPIO_OSPEEDR_OSPEEDR1
+#define GPIO_OSPEEDER_OSPEEDR1_0 GPIO_OSPEEDR_OSPEEDR1_0
+#define GPIO_OSPEEDER_OSPEEDR1_1 GPIO_OSPEEDR_OSPEEDR1_1
+#define GPIO_OSPEEDER_OSPEEDR2 GPIO_OSPEEDR_OSPEEDR2
+#define GPIO_OSPEEDER_OSPEEDR2_0 GPIO_OSPEEDR_OSPEEDR2_0
+#define GPIO_OSPEEDER_OSPEEDR2_1 GPIO_OSPEEDR_OSPEEDR2_1
+#define GPIO_OSPEEDER_OSPEEDR3 GPIO_OSPEEDR_OSPEEDR3
+#define GPIO_OSPEEDER_OSPEEDR3_0 GPIO_OSPEEDR_OSPEEDR3_0
+#define GPIO_OSPEEDER_OSPEEDR3_1 GPIO_OSPEEDR_OSPEEDR3_1
+#define GPIO_OSPEEDER_OSPEEDR4 GPIO_OSPEEDR_OSPEEDR4
+#define GPIO_OSPEEDER_OSPEEDR4_0 GPIO_OSPEEDR_OSPEEDR4_0
+#define GPIO_OSPEEDER_OSPEEDR4_1 GPIO_OSPEEDR_OSPEEDR4_1
+#define GPIO_OSPEEDER_OSPEEDR5 GPIO_OSPEEDR_OSPEEDR5
+#define GPIO_OSPEEDER_OSPEEDR5_0 GPIO_OSPEEDR_OSPEEDR5_0
+#define GPIO_OSPEEDER_OSPEEDR5_1 GPIO_OSPEEDR_OSPEEDR5_1
+#define GPIO_OSPEEDER_OSPEEDR6 GPIO_OSPEEDR_OSPEEDR6
+#define GPIO_OSPEEDER_OSPEEDR6_0 GPIO_OSPEEDR_OSPEEDR6_0
+#define GPIO_OSPEEDER_OSPEEDR6_1 GPIO_OSPEEDR_OSPEEDR6_1
+#define GPIO_OSPEEDER_OSPEEDR7 GPIO_OSPEEDR_OSPEEDR7
+#define GPIO_OSPEEDER_OSPEEDR7_0 GPIO_OSPEEDR_OSPEEDR7_0
+#define GPIO_OSPEEDER_OSPEEDR7_1 GPIO_OSPEEDR_OSPEEDR7_1
+#define GPIO_OSPEEDER_OSPEEDR8 GPIO_OSPEEDR_OSPEEDR8
+#define GPIO_OSPEEDER_OSPEEDR8_0 GPIO_OSPEEDR_OSPEEDR8_0
+#define GPIO_OSPEEDER_OSPEEDR8_1 GPIO_OSPEEDR_OSPEEDR8_1
+#define GPIO_OSPEEDER_OSPEEDR9 GPIO_OSPEEDR_OSPEEDR9
+#define GPIO_OSPEEDER_OSPEEDR9_0 GPIO_OSPEEDR_OSPEEDR9_0
+#define GPIO_OSPEEDER_OSPEEDR9_1 GPIO_OSPEEDR_OSPEEDR9_1
+#define GPIO_OSPEEDER_OSPEEDR10 GPIO_OSPEEDR_OSPEEDR10
+#define GPIO_OSPEEDER_OSPEEDR10_0 GPIO_OSPEEDR_OSPEEDR10_0
+#define GPIO_OSPEEDER_OSPEEDR10_1 GPIO_OSPEEDR_OSPEEDR10_1
+#define GPIO_OSPEEDER_OSPEEDR11 GPIO_OSPEEDR_OSPEEDR11
+#define GPIO_OSPEEDER_OSPEEDR11_0 GPIO_OSPEEDR_OSPEEDR11_0
+#define GPIO_OSPEEDER_OSPEEDR11_1 GPIO_OSPEEDR_OSPEEDR11_1
+#define GPIO_OSPEEDER_OSPEEDR12 GPIO_OSPEEDR_OSPEEDR12
+#define GPIO_OSPEEDER_OSPEEDR12_0 GPIO_OSPEEDR_OSPEEDR12_0
+#define GPIO_OSPEEDER_OSPEEDR12_1 GPIO_OSPEEDR_OSPEEDR12_1
+#define GPIO_OSPEEDER_OSPEEDR13 GPIO_OSPEEDR_OSPEEDR13
+#define GPIO_OSPEEDER_OSPEEDR13_0 GPIO_OSPEEDR_OSPEEDR13_0
+#define GPIO_OSPEEDER_OSPEEDR13_1 GPIO_OSPEEDR_OSPEEDR13_1
+#define GPIO_OSPEEDER_OSPEEDR14 GPIO_OSPEEDR_OSPEEDR14
+#define GPIO_OSPEEDER_OSPEEDR14_0 GPIO_OSPEEDR_OSPEEDR14_0
+#define GPIO_OSPEEDER_OSPEEDR14_1 GPIO_OSPEEDR_OSPEEDR14_1
+#define GPIO_OSPEEDER_OSPEEDR15 GPIO_OSPEEDR_OSPEEDR15
+#define GPIO_OSPEEDER_OSPEEDR15_0 GPIO_OSPEEDR_OSPEEDR15_0
+#define GPIO_OSPEEDER_OSPEEDR15_1 GPIO_OSPEEDR_OSPEEDR15_1
+
+/******************* Bit definition for GPIO_PUPDR register ******************/
+#define GPIO_PUPDR_PUPDR0 ((uint32_t)0x00000003)
+#define GPIO_PUPDR_PUPDR0_0 ((uint32_t)0x00000001)
+#define GPIO_PUPDR_PUPDR0_1 ((uint32_t)0x00000002)
+#define GPIO_PUPDR_PUPDR1 ((uint32_t)0x0000000C)
+#define GPIO_PUPDR_PUPDR1_0 ((uint32_t)0x00000004)
+#define GPIO_PUPDR_PUPDR1_1 ((uint32_t)0x00000008)
+#define GPIO_PUPDR_PUPDR2 ((uint32_t)0x00000030)
+#define GPIO_PUPDR_PUPDR2_0 ((uint32_t)0x00000010)
+#define GPIO_PUPDR_PUPDR2_1 ((uint32_t)0x00000020)
+#define GPIO_PUPDR_PUPDR3 ((uint32_t)0x000000C0)
+#define GPIO_PUPDR_PUPDR3_0 ((uint32_t)0x00000040)
+#define GPIO_PUPDR_PUPDR3_1 ((uint32_t)0x00000080)
+#define GPIO_PUPDR_PUPDR4 ((uint32_t)0x00000300)
+#define GPIO_PUPDR_PUPDR4_0 ((uint32_t)0x00000100)
+#define GPIO_PUPDR_PUPDR4_1 ((uint32_t)0x00000200)
+#define GPIO_PUPDR_PUPDR5 ((uint32_t)0x00000C00)
+#define GPIO_PUPDR_PUPDR5_0 ((uint32_t)0x00000400)
+#define GPIO_PUPDR_PUPDR5_1 ((uint32_t)0x00000800)
+#define GPIO_PUPDR_PUPDR6 ((uint32_t)0x00003000)
+#define GPIO_PUPDR_PUPDR6_0 ((uint32_t)0x00001000)
+#define GPIO_PUPDR_PUPDR6_1 ((uint32_t)0x00002000)
+#define GPIO_PUPDR_PUPDR7 ((uint32_t)0x0000C000)
+#define GPIO_PUPDR_PUPDR7_0 ((uint32_t)0x00004000)
+#define GPIO_PUPDR_PUPDR7_1 ((uint32_t)0x00008000)
+#define GPIO_PUPDR_PUPDR8 ((uint32_t)0x00030000)
+#define GPIO_PUPDR_PUPDR8_0 ((uint32_t)0x00010000)
+#define GPIO_PUPDR_PUPDR8_1 ((uint32_t)0x00020000)
+#define GPIO_PUPDR_PUPDR9 ((uint32_t)0x000C0000)
+#define GPIO_PUPDR_PUPDR9_0 ((uint32_t)0x00040000)
+#define GPIO_PUPDR_PUPDR9_1 ((uint32_t)0x00080000)
+#define GPIO_PUPDR_PUPDR10 ((uint32_t)0x00300000)
+#define GPIO_PUPDR_PUPDR10_0 ((uint32_t)0x00100000)
+#define GPIO_PUPDR_PUPDR10_1 ((uint32_t)0x00200000)
+#define GPIO_PUPDR_PUPDR11 ((uint32_t)0x00C00000)
+#define GPIO_PUPDR_PUPDR11_0 ((uint32_t)0x00400000)
+#define GPIO_PUPDR_PUPDR11_1 ((uint32_t)0x00800000)
+#define GPIO_PUPDR_PUPDR12 ((uint32_t)0x03000000)
+#define GPIO_PUPDR_PUPDR12_0 ((uint32_t)0x01000000)
+#define GPIO_PUPDR_PUPDR12_1 ((uint32_t)0x02000000)
+#define GPIO_PUPDR_PUPDR13 ((uint32_t)0x0C000000)
+#define GPIO_PUPDR_PUPDR13_0 ((uint32_t)0x04000000)
+#define GPIO_PUPDR_PUPDR13_1 ((uint32_t)0x08000000)
+#define GPIO_PUPDR_PUPDR14 ((uint32_t)0x30000000)
+#define GPIO_PUPDR_PUPDR14_0 ((uint32_t)0x10000000)
+#define GPIO_PUPDR_PUPDR14_1 ((uint32_t)0x20000000)
+#define GPIO_PUPDR_PUPDR15 ((uint32_t)0xC0000000)
+#define GPIO_PUPDR_PUPDR15_0 ((uint32_t)0x40000000)
+#define GPIO_PUPDR_PUPDR15_1 ((uint32_t)0x80000000)
+
+/******************* Bit definition for GPIO_IDR register *******************/
+#define GPIO_IDR_0 ((uint32_t)0x00000001)
+#define GPIO_IDR_1 ((uint32_t)0x00000002)
+#define GPIO_IDR_2 ((uint32_t)0x00000004)
+#define GPIO_IDR_3 ((uint32_t)0x00000008)
+#define GPIO_IDR_4 ((uint32_t)0x00000010)
+#define GPIO_IDR_5 ((uint32_t)0x00000020)
+#define GPIO_IDR_6 ((uint32_t)0x00000040)
+#define GPIO_IDR_7 ((uint32_t)0x00000080)
+#define GPIO_IDR_8 ((uint32_t)0x00000100)
+#define GPIO_IDR_9 ((uint32_t)0x00000200)
+#define GPIO_IDR_10 ((uint32_t)0x00000400)
+#define GPIO_IDR_11 ((uint32_t)0x00000800)
+#define GPIO_IDR_12 ((uint32_t)0x00001000)
+#define GPIO_IDR_13 ((uint32_t)0x00002000)
+#define GPIO_IDR_14 ((uint32_t)0x00004000)
+#define GPIO_IDR_15 ((uint32_t)0x00008000)
+
+/****************** Bit definition for GPIO_ODR register ********************/
+#define GPIO_ODR_0 ((uint32_t)0x00000001)
+#define GPIO_ODR_1 ((uint32_t)0x00000002)
+#define GPIO_ODR_2 ((uint32_t)0x00000004)
+#define GPIO_ODR_3 ((uint32_t)0x00000008)
+#define GPIO_ODR_4 ((uint32_t)0x00000010)
+#define GPIO_ODR_5 ((uint32_t)0x00000020)
+#define GPIO_ODR_6 ((uint32_t)0x00000040)
+#define GPIO_ODR_7 ((uint32_t)0x00000080)
+#define GPIO_ODR_8 ((uint32_t)0x00000100)
+#define GPIO_ODR_9 ((uint32_t)0x00000200)
+#define GPIO_ODR_10 ((uint32_t)0x00000400)
+#define GPIO_ODR_11 ((uint32_t)0x00000800)
+#define GPIO_ODR_12 ((uint32_t)0x00001000)
+#define GPIO_ODR_13 ((uint32_t)0x00002000)
+#define GPIO_ODR_14 ((uint32_t)0x00004000)
+#define GPIO_ODR_15 ((uint32_t)0x00008000)
+
+/****************** Bit definition for GPIO_BSRR register ********************/
+#define GPIO_BSRR_BS_0 ((uint32_t)0x00000001)
+#define GPIO_BSRR_BS_1 ((uint32_t)0x00000002)
+#define GPIO_BSRR_BS_2 ((uint32_t)0x00000004)
+#define GPIO_BSRR_BS_3 ((uint32_t)0x00000008)
+#define GPIO_BSRR_BS_4 ((uint32_t)0x00000010)
+#define GPIO_BSRR_BS_5 ((uint32_t)0x00000020)
+#define GPIO_BSRR_BS_6 ((uint32_t)0x00000040)
+#define GPIO_BSRR_BS_7 ((uint32_t)0x00000080)
+#define GPIO_BSRR_BS_8 ((uint32_t)0x00000100)
+#define GPIO_BSRR_BS_9 ((uint32_t)0x00000200)
+#define GPIO_BSRR_BS_10 ((uint32_t)0x00000400)
+#define GPIO_BSRR_BS_11 ((uint32_t)0x00000800)
+#define GPIO_BSRR_BS_12 ((uint32_t)0x00001000)
+#define GPIO_BSRR_BS_13 ((uint32_t)0x00002000)
+#define GPIO_BSRR_BS_14 ((uint32_t)0x00004000)
+#define GPIO_BSRR_BS_15 ((uint32_t)0x00008000)
+#define GPIO_BSRR_BR_0 ((uint32_t)0x00010000)
+#define GPIO_BSRR_BR_1 ((uint32_t)0x00020000)
+#define GPIO_BSRR_BR_2 ((uint32_t)0x00040000)
+#define GPIO_BSRR_BR_3 ((uint32_t)0x00080000)
+#define GPIO_BSRR_BR_4 ((uint32_t)0x00100000)
+#define GPIO_BSRR_BR_5 ((uint32_t)0x00200000)
+#define GPIO_BSRR_BR_6 ((uint32_t)0x00400000)
+#define GPIO_BSRR_BR_7 ((uint32_t)0x00800000)
+#define GPIO_BSRR_BR_8 ((uint32_t)0x01000000)
+#define GPIO_BSRR_BR_9 ((uint32_t)0x02000000)
+#define GPIO_BSRR_BR_10 ((uint32_t)0x04000000)
+#define GPIO_BSRR_BR_11 ((uint32_t)0x08000000)
+#define GPIO_BSRR_BR_12 ((uint32_t)0x10000000)
+#define GPIO_BSRR_BR_13 ((uint32_t)0x20000000)
+#define GPIO_BSRR_BR_14 ((uint32_t)0x40000000)
+#define GPIO_BSRR_BR_15 ((uint32_t)0x80000000)
+
+/****************** Bit definition for GPIO_LCKR register ********************/
+#define GPIO_LCKR_LCK0 ((uint32_t)0x00000001)
+#define GPIO_LCKR_LCK1 ((uint32_t)0x00000002)
+#define GPIO_LCKR_LCK2 ((uint32_t)0x00000004)
+#define GPIO_LCKR_LCK3 ((uint32_t)0x00000008)
+#define GPIO_LCKR_LCK4 ((uint32_t)0x00000010)
+#define GPIO_LCKR_LCK5 ((uint32_t)0x00000020)
+#define GPIO_LCKR_LCK6 ((uint32_t)0x00000040)
+#define GPIO_LCKR_LCK7 ((uint32_t)0x00000080)
+#define GPIO_LCKR_LCK8 ((uint32_t)0x00000100)
+#define GPIO_LCKR_LCK9 ((uint32_t)0x00000200)
+#define GPIO_LCKR_LCK10 ((uint32_t)0x00000400)
+#define GPIO_LCKR_LCK11 ((uint32_t)0x00000800)
+#define GPIO_LCKR_LCK12 ((uint32_t)0x00001000)
+#define GPIO_LCKR_LCK13 ((uint32_t)0x00002000)
+#define GPIO_LCKR_LCK14 ((uint32_t)0x00004000)
+#define GPIO_LCKR_LCK15 ((uint32_t)0x00008000)
+#define GPIO_LCKR_LCKK ((uint32_t)0x00010000)
+
+/****************** Bit definition for GPIO_AFRL register ********************/
+#define GPIO_AFRL_AFRL0 ((uint32_t)0x0000000F)
+#define GPIO_AFRL_AFRL1 ((uint32_t)0x000000F0)
+#define GPIO_AFRL_AFRL2 ((uint32_t)0x00000F00)
+#define GPIO_AFRL_AFRL3 ((uint32_t)0x0000F000)
+#define GPIO_AFRL_AFRL4 ((uint32_t)0x000F0000)
+#define GPIO_AFRL_AFRL5 ((uint32_t)0x00F00000)
+#define GPIO_AFRL_AFRL6 ((uint32_t)0x0F000000)
+#define GPIO_AFRL_AFRL7 ((uint32_t)0xF0000000)
+
+/****************** Bit definition for GPIO_AFRH register ********************/
+#define GPIO_AFRH_AFRH0 ((uint32_t)0x0000000F)
+#define GPIO_AFRH_AFRH1 ((uint32_t)0x000000F0)
+#define GPIO_AFRH_AFRH2 ((uint32_t)0x00000F00)
+#define GPIO_AFRH_AFRH3 ((uint32_t)0x0000F000)
+#define GPIO_AFRH_AFRH4 ((uint32_t)0x000F0000)
+#define GPIO_AFRH_AFRH5 ((uint32_t)0x00F00000)
+#define GPIO_AFRH_AFRH6 ((uint32_t)0x0F000000)
+#define GPIO_AFRH_AFRH7 ((uint32_t)0xF0000000)
+
+/****************** Bit definition for GPIO_BRR register *********************/
+#define GPIO_BRR_BR_0 ((uint32_t)0x00000001)
+#define GPIO_BRR_BR_1 ((uint32_t)0x00000002)
+#define GPIO_BRR_BR_2 ((uint32_t)0x00000004)
+#define GPIO_BRR_BR_3 ((uint32_t)0x00000008)
+#define GPIO_BRR_BR_4 ((uint32_t)0x00000010)
+#define GPIO_BRR_BR_5 ((uint32_t)0x00000020)
+#define GPIO_BRR_BR_6 ((uint32_t)0x00000040)
+#define GPIO_BRR_BR_7 ((uint32_t)0x00000080)
+#define GPIO_BRR_BR_8 ((uint32_t)0x00000100)
+#define GPIO_BRR_BR_9 ((uint32_t)0x00000200)
+#define GPIO_BRR_BR_10 ((uint32_t)0x00000400)
+#define GPIO_BRR_BR_11 ((uint32_t)0x00000800)
+#define GPIO_BRR_BR_12 ((uint32_t)0x00001000)
+#define GPIO_BRR_BR_13 ((uint32_t)0x00002000)
+#define GPIO_BRR_BR_14 ((uint32_t)0x00004000)
+#define GPIO_BRR_BR_15 ((uint32_t)0x00008000)
+
+/******************************************************************************/
+/* */
+/* Inter-integrated Circuit Interface (I2C) */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for I2C_CR1 register *******************/
+#define I2C_CR1_PE ((uint32_t)0x00000001) /*!< Peripheral enable */
+#define I2C_CR1_TXIE ((uint32_t)0x00000002) /*!< TX interrupt enable */
+#define I2C_CR1_RXIE ((uint32_t)0x00000004) /*!< RX interrupt enable */
+#define I2C_CR1_ADDRIE ((uint32_t)0x00000008) /*!< Address match interrupt enable */
+#define I2C_CR1_NACKIE ((uint32_t)0x00000010) /*!< NACK received interrupt enable */
+#define I2C_CR1_STOPIE ((uint32_t)0x00000020) /*!< STOP detection interrupt enable */
+#define I2C_CR1_TCIE ((uint32_t)0x00000040) /*!< Transfer complete interrupt enable */
+#define I2C_CR1_ERRIE ((uint32_t)0x00000080) /*!< Errors interrupt enable */
+#define I2C_CR1_DFN ((uint32_t)0x00000F00) /*!< Digital noise filter */
+#define I2C_CR1_ANFOFF ((uint32_t)0x00001000) /*!< Analog noise filter OFF */
+#define I2C_CR1_SWRST ((uint32_t)0x00002000) /*!< Software reset */
+#define I2C_CR1_TXDMAEN ((uint32_t)0x00004000) /*!< DMA transmission requests enable */
+#define I2C_CR1_RXDMAEN ((uint32_t)0x00008000) /*!< DMA reception requests enable */
+#define I2C_CR1_SBC ((uint32_t)0x00010000) /*!< Slave byte control */
+#define I2C_CR1_NOSTRETCH ((uint32_t)0x00020000) /*!< Clock stretching disable */
+#define I2C_CR1_WUPEN ((uint32_t)0x00040000) /*!< Wakeup from STOP enable */
+#define I2C_CR1_GCEN ((uint32_t)0x00080000) /*!< General call enable */
+#define I2C_CR1_SMBHEN ((uint32_t)0x00100000) /*!< SMBus host address enable */
+#define I2C_CR1_SMBDEN ((uint32_t)0x00200000) /*!< SMBus device default address enable */
+#define I2C_CR1_ALERTEN ((uint32_t)0x00400000) /*!< SMBus alert enable */
+#define I2C_CR1_PECEN ((uint32_t)0x00800000) /*!< PEC enable */
+
+/****************** Bit definition for I2C_CR2 register ********************/
+#define I2C_CR2_SADD ((uint32_t)0x000003FF) /*!< Slave address (master mode) */
+#define I2C_CR2_RD_WRN ((uint32_t)0x00000400) /*!< Transfer direction (master mode) */
+#define I2C_CR2_ADD10 ((uint32_t)0x00000800) /*!< 10-bit addressing mode (master mode) */
+#define I2C_CR2_HEAD10R ((uint32_t)0x00001000) /*!< 10-bit address header only read direction (master mode) */
+#define I2C_CR2_START ((uint32_t)0x00002000) /*!< START generation */
+#define I2C_CR2_STOP ((uint32_t)0x00004000) /*!< STOP generation (master mode) */
+#define I2C_CR2_NACK ((uint32_t)0x00008000) /*!< NACK generation (slave mode) */
+#define I2C_CR2_NBYTES ((uint32_t)0x00FF0000) /*!< Number of bytes */
+#define I2C_CR2_RELOAD ((uint32_t)0x01000000) /*!< NBYTES reload mode */
+#define I2C_CR2_AUTOEND ((uint32_t)0x02000000) /*!< Automatic end mode (master mode) */
+#define I2C_CR2_PECBYTE ((uint32_t)0x04000000) /*!< Packet error checking byte */
+
+/******************* Bit definition for I2C_OAR1 register ******************/
+#define I2C_OAR1_OA1 ((uint32_t)0x000003FF) /*!< Interface own address 1 */
+#define I2C_OAR1_OA1MODE ((uint32_t)0x00000400) /*!< Own address 1 10-bit mode */
+#define I2C_OAR1_OA1EN ((uint32_t)0x00008000) /*!< Own address 1 enable */
+
+/******************* Bit definition for I2C_OAR2 register ******************/
+#define I2C_OAR2_OA2 ((uint32_t)0x000000FE) /*!< Interface own address 2 */
+#define I2C_OAR2_OA2MSK ((uint32_t)0x00000700) /*!< Own address 2 masks */
+#define I2C_OAR2_OA2EN ((uint32_t)0x00008000) /*!< Own address 2 enable */
+
+/******************* Bit definition for I2C_TIMINGR register ****************/
+#define I2C_TIMINGR_SCLL ((uint32_t)0x000000FF) /*!< SCL low period (master mode) */
+#define I2C_TIMINGR_SCLH ((uint32_t)0x0000FF00) /*!< SCL high period (master mode) */
+#define I2C_TIMINGR_SDADEL ((uint32_t)0x000F0000) /*!< Data hold time */
+#define I2C_TIMINGR_SCLDEL ((uint32_t)0x00F00000) /*!< Data setup time */
+#define I2C_TIMINGR_PRESC ((uint32_t)0xF0000000) /*!< Timings prescaler */
+
+/******************* Bit definition for I2C_TIMEOUTR register ****************/
+#define I2C_TIMEOUTR_TIMEOUTA ((uint32_t)0x00000FFF) /*!< Bus timeout A */
+#define I2C_TIMEOUTR_TIDLE ((uint32_t)0x00001000) /*!< Idle clock timeout detection */
+#define I2C_TIMEOUTR_TIMOUTEN ((uint32_t)0x00008000) /*!< Clock timeout enable */
+#define I2C_TIMEOUTR_TIMEOUTB ((uint32_t)0x0FFF0000) /*!< Bus timeout B*/
+#define I2C_TIMEOUTR_TEXTEN ((uint32_t)0x80000000) /*!< Extended clock timeout enable */
+
+/****************** Bit definition for I2C_ISR register ********************/
+#define I2C_ISR_TXE ((uint32_t)0x00000001) /*!< Transmit data register empty */
+#define I2C_ISR_TXIS ((uint32_t)0x00000002) /*!< Transmit interrupt status */
+#define I2C_ISR_RXNE ((uint32_t)0x00000004) /*!< Receive data register not empty */
+#define I2C_ISR_ADDR ((uint32_t)0x00000008) /*!< Address matched (slave mode)*/
+#define I2C_ISR_NACKF ((uint32_t)0x00000010) /*!< NACK received flag */
+#define I2C_ISR_STOPF ((uint32_t)0x00000020) /*!< STOP detection flag */
+#define I2C_ISR_TC ((uint32_t)0x00000040) /*!< Transfer complete (master mode) */
+#define I2C_ISR_TCR ((uint32_t)0x00000080) /*!< Transfer complete reload */
+#define I2C_ISR_BERR ((uint32_t)0x00000100) /*!< Bus error */
+#define I2C_ISR_ARLO ((uint32_t)0x00000200) /*!< Arbitration lost */
+#define I2C_ISR_OVR ((uint32_t)0x00000400) /*!< Overrun/Underrun */
+#define I2C_ISR_PECERR ((uint32_t)0x00000800) /*!< PEC error in reception */
+#define I2C_ISR_TIMEOUT ((uint32_t)0x00001000) /*!< Timeout or Tlow detection flag */
+#define I2C_ISR_ALERT ((uint32_t)0x00002000) /*!< SMBus alert */
+#define I2C_ISR_BUSY ((uint32_t)0x00008000) /*!< Bus busy */
+#define I2C_ISR_DIR ((uint32_t)0x00010000) /*!< Transfer direction (slave mode) */
+#define I2C_ISR_ADDCODE ((uint32_t)0x00FE0000) /*!< Address match code (slave mode) */
+
+/****************** Bit definition for I2C_ICR register ********************/
+#define I2C_ICR_ADDRCF ((uint32_t)0x00000008) /*!< Address matched clear flag */
+#define I2C_ICR_NACKCF ((uint32_t)0x00000010) /*!< NACK clear flag */
+#define I2C_ICR_STOPCF ((uint32_t)0x00000020) /*!< STOP detection clear flag */
+#define I2C_ICR_BERRCF ((uint32_t)0x00000100) /*!< Bus error clear flag */
+#define I2C_ICR_ARLOCF ((uint32_t)0x00000200) /*!< Arbitration lost clear flag */
+#define I2C_ICR_OVRCF ((uint32_t)0x00000400) /*!< Overrun/Underrun clear flag */
+#define I2C_ICR_PECCF ((uint32_t)0x00000800) /*!< PAC error clear flag */
+#define I2C_ICR_TIMOUTCF ((uint32_t)0x00001000) /*!< Timeout clear flag */
+#define I2C_ICR_ALERTCF ((uint32_t)0x00002000) /*!< Alert clear flag */
+
+/****************** Bit definition for I2C_PECR register *******************/
+#define I2C_PECR_PEC ((uint32_t)0x000000FF) /*!< PEC register */
+
+/****************** Bit definition for I2C_RXDR register *********************/
+#define I2C_RXDR_RXDATA ((uint32_t)0x000000FF) /*!< 8-bit receive data */
+
+/****************** Bit definition for I2C_TXDR register *******************/
+#define I2C_TXDR_TXDATA ((uint32_t)0x000000FF) /*!< 8-bit transmit data */
+
+/*****************************************************************************/
+/* */
+/* Independent WATCHDOG (IWDG) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for IWDG_KR register *******************/
+#define IWDG_KR_KEY ((uint32_t)0xFFFF) /*!< Key value (write only, read 0000h) */
+
+/******************* Bit definition for IWDG_PR register *******************/
+#define IWDG_PR_PR ((uint32_t)0x07) /*!< PR[2:0] (Prescaler divider) */
+#define IWDG_PR_PR_0 ((uint32_t)0x01) /*!< Bit 0 */
+#define IWDG_PR_PR_1 ((uint32_t)0x02) /*!< Bit 1 */
+#define IWDG_PR_PR_2 ((uint32_t)0x04) /*!< Bit 2 */
+
+/******************* Bit definition for IWDG_RLR register ******************/
+#define IWDG_RLR_RL ((uint32_t)0x0FFF) /*!< Watchdog counter reload value */
+
+/******************* Bit definition for IWDG_SR register *******************/
+#define IWDG_SR_PVU ((uint32_t)0x01) /*!< Watchdog prescaler value update */
+#define IWDG_SR_RVU ((uint32_t)0x02) /*!< Watchdog counter reload value update */
+#define IWDG_SR_WVU ((uint32_t)0x04) /*!< Watchdog counter window value update */
+
+/******************* Bit definition for IWDG_KR register *******************/
+#define IWDG_WINR_WIN ((uint32_t)0x0FFF) /*!< Watchdog counter window value */
+
+/*****************************************************************************/
+/* */
+/* Power Control (PWR) */
+/* */
+/*****************************************************************************/
+
+/******************** Bit definition for PWR_CR register *******************/
+#define PWR_CR_LPDS ((uint32_t)0x00000001) /*!< Low-power Deepsleep */
+#define PWR_CR_PDDS ((uint32_t)0x00000002) /*!< Power Down Deepsleep */
+#define PWR_CR_CWUF ((uint32_t)0x00000004) /*!< Clear Wakeup Flag */
+#define PWR_CR_CSBF ((uint32_t)0x00000008) /*!< Clear Standby Flag */
+#define PWR_CR_DBP ((uint32_t)0x00000100) /*!< Disable Backup Domain write protection */
+
+/******************* Bit definition for PWR_CSR register *******************/
+#define PWR_CSR_WUF ((uint32_t)0x00000001) /*!< Wakeup Flag */
+#define PWR_CSR_SBF ((uint32_t)0x00000002) /*!< Standby Flag */
+#define PWR_CSR_VREFINTRDYF ((uint32_t)0x00000008) /*!< Internal voltage reference (VREFINT) ready flag */
+
+#define PWR_CSR_EWUP1 ((uint32_t)0x00000100) /*!< Enable WKUP pin 1 */
+#define PWR_CSR_EWUP2 ((uint32_t)0x00000200) /*!< Enable WKUP pin 2 */
+#define PWR_CSR_EWUP3 ((uint32_t)0x00000400) /*!< Enable WKUP pin 3 */
+#define PWR_CSR_EWUP4 ((uint32_t)0x00000800) /*!< Enable WKUP pin 4 */
+#define PWR_CSR_EWUP5 ((uint32_t)0x00001000) /*!< Enable WKUP pin 5 */
+#define PWR_CSR_EWUP6 ((uint32_t)0x00002000) /*!< Enable WKUP pin 6 */
+#define PWR_CSR_EWUP7 ((uint32_t)0x00004000) /*!< Enable WKUP pin 7 */
+#define PWR_CSR_EWUP8 ((uint32_t)0x00008000) /*!< Enable WKUP pin 8 */
+
+/*****************************************************************************/
+/* */
+/* Reset and Clock Control */
+/* */
+/*****************************************************************************/
+
+/******************** Bit definition for RCC_CR register *******************/
+#define RCC_CR_HSION ((uint32_t)0x00000001) /*!< Internal High Speed clock enable */
+#define RCC_CR_HSIRDY ((uint32_t)0x00000002) /*!< Internal High Speed clock ready flag */
+
+#define RCC_CR_HSITRIM ((uint32_t)0x000000F8) /*!< Internal High Speed clock trimming */
+#define RCC_CR_HSITRIM_0 ((uint32_t)0x00000008) /*!<Bit 0 */
+#define RCC_CR_HSITRIM_1 ((uint32_t)0x00000010) /*!<Bit 1 */
+#define RCC_CR_HSITRIM_2 ((uint32_t)0x00000020) /*!<Bit 2 */
+#define RCC_CR_HSITRIM_3 ((uint32_t)0x00000040) /*!<Bit 3 */
+#define RCC_CR_HSITRIM_4 ((uint32_t)0x00000080) /*!<Bit 4 */
+
+#define RCC_CR_HSICAL ((uint32_t)0x0000FF00) /*!< Internal High Speed clock Calibration */
+#define RCC_CR_HSICAL_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define RCC_CR_HSICAL_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define RCC_CR_HSICAL_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define RCC_CR_HSICAL_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define RCC_CR_HSICAL_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+#define RCC_CR_HSICAL_5 ((uint32_t)0x00002000) /*!<Bit 5 */
+#define RCC_CR_HSICAL_6 ((uint32_t)0x00004000) /*!<Bit 6 */
+#define RCC_CR_HSICAL_7 ((uint32_t)0x00008000) /*!<Bit 7 */
+
+#define RCC_CR_HSEON ((uint32_t)0x00010000) /*!< External High Speed clock enable */
+#define RCC_CR_HSERDY ((uint32_t)0x00020000) /*!< External High Speed clock ready flag */
+#define RCC_CR_HSEBYP ((uint32_t)0x00040000) /*!< External High Speed clock Bypass */
+#define RCC_CR_CSSON ((uint32_t)0x00080000) /*!< Clock Security System enable */
+#define RCC_CR_PLLON ((uint32_t)0x01000000) /*!< PLL enable */
+#define RCC_CR_PLLRDY ((uint32_t)0x02000000) /*!< PLL clock ready flag */
+
+/******************** Bit definition for RCC_CFGR register *****************/
+/*!< SW configuration */
+#define RCC_CFGR_SW ((uint32_t)0x00000003) /*!< SW[1:0] bits (System clock Switch) */
+#define RCC_CFGR_SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR_SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+#define RCC_CFGR_SW_HSI ((uint32_t)0x00000000) /*!< HSI selected as system clock */
+#define RCC_CFGR_SW_HSE ((uint32_t)0x00000001) /*!< HSE selected as system clock */
+#define RCC_CFGR_SW_PLL ((uint32_t)0x00000002) /*!< PLL selected as system clock */
+#define RCC_CFGR_SW_HSI48 ((uint32_t)0x00000003) /*!< HSI48 selected as system clock */
+
+/*!< SWS configuration */
+#define RCC_CFGR_SWS ((uint32_t)0x0000000C) /*!< SWS[1:0] bits (System Clock Switch Status) */
+#define RCC_CFGR_SWS_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define RCC_CFGR_SWS_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+
+#define RCC_CFGR_SWS_HSI ((uint32_t)0x00000000) /*!< HSI oscillator used as system clock */
+#define RCC_CFGR_SWS_HSE ((uint32_t)0x00000004) /*!< HSE oscillator used as system clock */
+#define RCC_CFGR_SWS_PLL ((uint32_t)0x00000008) /*!< PLL used as system clock */
+#define RCC_CFGR_SWS_HSI48 ((uint32_t)0x0000000C) /*!< HSI48 oscillator used as system clock */
+
+/*!< HPRE configuration */
+#define RCC_CFGR_HPRE ((uint32_t)0x000000F0) /*!< HPRE[3:0] bits (AHB prescaler) */
+#define RCC_CFGR_HPRE_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define RCC_CFGR_HPRE_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define RCC_CFGR_HPRE_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+#define RCC_CFGR_HPRE_3 ((uint32_t)0x00000080) /*!< Bit 3 */
+
+#define RCC_CFGR_HPRE_DIV1 ((uint32_t)0x00000000) /*!< SYSCLK not divided */
+#define RCC_CFGR_HPRE_DIV2 ((uint32_t)0x00000080) /*!< SYSCLK divided by 2 */
+#define RCC_CFGR_HPRE_DIV4 ((uint32_t)0x00000090) /*!< SYSCLK divided by 4 */
+#define RCC_CFGR_HPRE_DIV8 ((uint32_t)0x000000A0) /*!< SYSCLK divided by 8 */
+#define RCC_CFGR_HPRE_DIV16 ((uint32_t)0x000000B0) /*!< SYSCLK divided by 16 */
+#define RCC_CFGR_HPRE_DIV64 ((uint32_t)0x000000C0) /*!< SYSCLK divided by 64 */
+#define RCC_CFGR_HPRE_DIV128 ((uint32_t)0x000000D0) /*!< SYSCLK divided by 128 */
+#define RCC_CFGR_HPRE_DIV256 ((uint32_t)0x000000E0) /*!< SYSCLK divided by 256 */
+#define RCC_CFGR_HPRE_DIV512 ((uint32_t)0x000000F0) /*!< SYSCLK divided by 512 */
+
+/*!< PPRE configuration */
+#define RCC_CFGR_PPRE ((uint32_t)0x00000700) /*!< PRE[2:0] bits (APB prescaler) */
+#define RCC_CFGR_PPRE_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define RCC_CFGR_PPRE_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define RCC_CFGR_PPRE_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+
+#define RCC_CFGR_PPRE_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */
+#define RCC_CFGR_PPRE_DIV2 ((uint32_t)0x00000400) /*!< HCLK divided by 2 */
+#define RCC_CFGR_PPRE_DIV4 ((uint32_t)0x00000500) /*!< HCLK divided by 4 */
+#define RCC_CFGR_PPRE_DIV8 ((uint32_t)0x00000600) /*!< HCLK divided by 8 */
+#define RCC_CFGR_PPRE_DIV16 ((uint32_t)0x00000700) /*!< HCLK divided by 16 */
+
+/*!< ADCPPRE configuration: obsolete setting for STM32F091xC */
+/*#define RCC_CFGR_ADCPRE ((uint32_t)0x00004000)*/ /*!< ADCPRE bit (ADC prescaler) */
+
+/*#define RCC_CFGR_ADCPRE_DIV2 ((uint32_t)0x00000000)*/ /*!< PCLK divided by 2 */
+/*#define RCC_CFGR_ADCPRE_DIV4 ((uint32_t)0x00004000)*/ /*!< PCLK divided by 4 */
+
+#define RCC_CFGR_PLLSRC ((uint32_t)0x00018000) /*!< PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSI_DIV2 ((uint32_t)0x00000000) /*!< HSI clock divided by 2 selected as PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSI_PREDIV ((uint32_t)0x00008000) /*!< HSI/PREDIV clock selected as PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSE_PREDIV ((uint32_t)0x00010000) /*!< HSE/PREDIV clock selected as PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSI48_PREDIV ((uint32_t)0x00018000) /*!< HSI48/PREDIV clock selected as PLL entry clock source */
+
+#define RCC_CFGR_PLLXTPRE ((uint32_t)0x00020000) /*!< HSE divider for PLL entry */
+#define RCC_CFGR_PLLXTPRE_HSE_PREDIV_DIV1 ((uint32_t)0x00000000) /*!< HSE/PREDIV clock not divided for PLL entry */
+#define RCC_CFGR_PLLXTPRE_HSE_PREDIV_DIV2 ((uint32_t)0x00020000) /*!< HSE/PREDIV clock divided by 2 for PLL entry */
+
+/*!< PLLMUL configuration */
+#define RCC_CFGR_PLLMUL ((uint32_t)0x003C0000) /*!< PLLMUL[3:0] bits (PLL multiplication factor) */
+#define RCC_CFGR_PLLMUL_0 ((uint32_t)0x00040000) /*!< Bit 0 */
+#define RCC_CFGR_PLLMUL_1 ((uint32_t)0x00080000) /*!< Bit 1 */
+#define RCC_CFGR_PLLMUL_2 ((uint32_t)0x00100000) /*!< Bit 2 */
+#define RCC_CFGR_PLLMUL_3 ((uint32_t)0x00200000) /*!< Bit 3 */
+
+#define RCC_CFGR_PLLMUL2 ((uint32_t)0x00000000) /*!< PLL input clock*2 */
+#define RCC_CFGR_PLLMUL3 ((uint32_t)0x00040000) /*!< PLL input clock*3 */
+#define RCC_CFGR_PLLMUL4 ((uint32_t)0x00080000) /*!< PLL input clock*4 */
+#define RCC_CFGR_PLLMUL5 ((uint32_t)0x000C0000) /*!< PLL input clock*5 */
+#define RCC_CFGR_PLLMUL6 ((uint32_t)0x00100000) /*!< PLL input clock*6 */
+#define RCC_CFGR_PLLMUL7 ((uint32_t)0x00140000) /*!< PLL input clock*7 */
+#define RCC_CFGR_PLLMUL8 ((uint32_t)0x00180000) /*!< PLL input clock*8 */
+#define RCC_CFGR_PLLMUL9 ((uint32_t)0x001C0000) /*!< PLL input clock*9 */
+#define RCC_CFGR_PLLMUL10 ((uint32_t)0x00200000) /*!< PLL input clock10 */
+#define RCC_CFGR_PLLMUL11 ((uint32_t)0x00240000) /*!< PLL input clock*11 */
+#define RCC_CFGR_PLLMUL12 ((uint32_t)0x00280000) /*!< PLL input clock*12 */
+#define RCC_CFGR_PLLMUL13 ((uint32_t)0x002C0000) /*!< PLL input clock*13 */
+#define RCC_CFGR_PLLMUL14 ((uint32_t)0x00300000) /*!< PLL input clock*14 */
+#define RCC_CFGR_PLLMUL15 ((uint32_t)0x00340000) /*!< PLL input clock*15 */
+#define RCC_CFGR_PLLMUL16 ((uint32_t)0x00380000) /*!< PLL input clock*16 */
+
+/*!< MCO configuration */
+#define RCC_CFGR_MCO ((uint32_t)0x0F000000) /*!< MCO[3:0] bits (Microcontroller Clock Output) */
+#define RCC_CFGR_MCO_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define RCC_CFGR_MCO_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define RCC_CFGR_MCO_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+#define RCC_CFGR_MCO_3 ((uint32_t)0x08000000) /*!< Bit 3 */
+
+#define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
+#define RCC_CFGR_MCO_HSI14 ((uint32_t)0x01000000) /*!< HSI14 clock selected as MCO source */
+#define RCC_CFGR_MCO_LSI ((uint32_t)0x02000000) /*!< LSI clock selected as MCO source */
+#define RCC_CFGR_MCO_LSE ((uint32_t)0x03000000) /*!< LSE clock selected as MCO source */
+#define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x04000000) /*!< System clock selected as MCO source */
+#define RCC_CFGR_MCO_HSI ((uint32_t)0x05000000) /*!< HSI clock selected as MCO source */
+#define RCC_CFGR_MCO_HSE ((uint32_t)0x06000000) /*!< HSE clock selected as MCO source */
+#define RCC_CFGR_MCO_PLL ((uint32_t)0x07000000) /*!< PLL clock divided by 2 selected as MCO source */
+#define RCC_CFGR_MCO_HSI48 ((uint32_t)0x08000000) /*!< HSI48 clock selected as MCO source */
+
+#define RCC_CFGR_MCOPRE ((uint32_t)0x70000000) /*!< MCO prescaler */
+#define RCC_CFGR_MCOPRE_DIV1 ((uint32_t)0x00000000) /*!< MCO is divided by 1 */
+#define RCC_CFGR_MCOPRE_DIV2 ((uint32_t)0x10000000) /*!< MCO is divided by 2 */
+#define RCC_CFGR_MCOPRE_DIV4 ((uint32_t)0x20000000) /*!< MCO is divided by 4 */
+#define RCC_CFGR_MCOPRE_DIV8 ((uint32_t)0x30000000) /*!< MCO is divided by 8 */
+#define RCC_CFGR_MCOPRE_DIV16 ((uint32_t)0x40000000) /*!< MCO is divided by 16 */
+#define RCC_CFGR_MCOPRE_DIV32 ((uint32_t)0x50000000) /*!< MCO is divided by 32 */
+#define RCC_CFGR_MCOPRE_DIV64 ((uint32_t)0x60000000) /*!< MCO is divided by 64 */
+#define RCC_CFGR_MCOPRE_DIV128 ((uint32_t)0x70000000) /*!< MCO is divided by 128 */
+
+#define RCC_CFGR_PLLNODIV ((uint32_t)0x80000000) /*!< PLL is not divided to MCO */
+
+/*!<****************** Bit definition for RCC_CIR register *****************/
+#define RCC_CIR_LSIRDYF ((uint32_t)0x00000001) /*!< LSI Ready Interrupt flag */
+#define RCC_CIR_LSERDYF ((uint32_t)0x00000002) /*!< LSE Ready Interrupt flag */
+#define RCC_CIR_HSIRDYF ((uint32_t)0x00000004) /*!< HSI Ready Interrupt flag */
+#define RCC_CIR_HSERDYF ((uint32_t)0x00000008) /*!< HSE Ready Interrupt flag */
+#define RCC_CIR_PLLRDYF ((uint32_t)0x00000010) /*!< PLL Ready Interrupt flag */
+#define RCC_CIR_HSI14RDYF ((uint32_t)0x00000020) /*!< HSI14 Ready Interrupt flag */
+#define RCC_CIR_HSI48RDYF ((uint32_t)0x00000040) /*!< HSI48 Ready Interrupt flag */
+#define RCC_CIR_CSSF ((uint32_t)0x00000080) /*!< Clock Security System Interrupt flag */
+#define RCC_CIR_LSIRDYIE ((uint32_t)0x00000100) /*!< LSI Ready Interrupt Enable */
+#define RCC_CIR_LSERDYIE ((uint32_t)0x00000200) /*!< LSE Ready Interrupt Enable */
+#define RCC_CIR_HSIRDYIE ((uint32_t)0x00000400) /*!< HSI Ready Interrupt Enable */
+#define RCC_CIR_HSERDYIE ((uint32_t)0x00000800) /*!< HSE Ready Interrupt Enable */
+#define RCC_CIR_PLLRDYIE ((uint32_t)0x00001000) /*!< PLL Ready Interrupt Enable */
+#define RCC_CIR_HSI14RDYIE ((uint32_t)0x00002000) /*!< HSI14 Ready Interrupt Enable */
+#define RCC_CIR_HSI48RDYIE ((uint32_t)0x00004000) /*!< HSI48 Ready Interrupt Enable */
+#define RCC_CIR_LSIRDYC ((uint32_t)0x00010000) /*!< LSI Ready Interrupt Clear */
+#define RCC_CIR_LSERDYC ((uint32_t)0x00020000) /*!< LSE Ready Interrupt Clear */
+#define RCC_CIR_HSIRDYC ((uint32_t)0x00040000) /*!< HSI Ready Interrupt Clear */
+#define RCC_CIR_HSERDYC ((uint32_t)0x00080000) /*!< HSE Ready Interrupt Clear */
+#define RCC_CIR_PLLRDYC ((uint32_t)0x00100000) /*!< PLL Ready Interrupt Clear */
+#define RCC_CIR_HSI14RDYC ((uint32_t)0x00200000) /*!< HSI14 Ready Interrupt Clear */
+#define RCC_CIR_HSI48RDYC ((uint32_t)0x00400000) /*!< HSI48 Ready Interrupt Clear */
+#define RCC_CIR_CSSC ((uint32_t)0x00800000) /*!< Clock Security System Interrupt Clear */
+
+/***************** Bit definition for RCC_APB2RSTR register ****************/
+#define RCC_APB2RSTR_SYSCFGRST ((uint32_t)0x00000001) /*!< SYSCFG clock reset */
+#define RCC_APB2RSTR_ADCRST ((uint32_t)0x00000200) /*!< ADC clock reset */
+#define RCC_APB2RSTR_USART8RST ((uint32_t)0x00000080) /*!< USART8 clock reset */
+#define RCC_APB2RSTR_USART7RST ((uint32_t)0x00000040) /*!< USART7 clock reset */
+#define RCC_APB2RSTR_USART6RST ((uint32_t)0x00000020) /*!< USART6 clock reset */
+#define RCC_APB2RSTR_TIM1RST ((uint32_t)0x00000800) /*!< TIM1 clock reset */
+#define RCC_APB2RSTR_SPI1RST ((uint32_t)0x00001000) /*!< SPI1 clock reset */
+#define RCC_APB2RSTR_USART1RST ((uint32_t)0x00004000) /*!< USART1 clock reset */
+#define RCC_APB2RSTR_TIM15RST ((uint32_t)0x00010000) /*!< TIM15 clock reset */
+#define RCC_APB2RSTR_TIM16RST ((uint32_t)0x00020000) /*!< TIM16 clock reset */
+#define RCC_APB2RSTR_TIM17RST ((uint32_t)0x00040000) /*!< TIM17 clock reset */
+#define RCC_APB2RSTR_DBGMCURST ((uint32_t)0x00400000) /*!< DBGMCU clock reset */
+
+/*!< Old ADC1 clock reset bit definition maintained for legacy purpose */
+#define RCC_APB2RSTR_ADC1RST RCC_APB2RSTR_ADCRST
+
+/***************** Bit definition for RCC_APB1RSTR register ****************/
+#define RCC_APB1RSTR_TIM2RST ((uint32_t)0x00000001) /*!< Timer 2 clock reset */
+#define RCC_APB1RSTR_TIM3RST ((uint32_t)0x00000002) /*!< Timer 3 clock reset */
+#define RCC_APB1RSTR_TIM6RST ((uint32_t)0x00000010) /*!< Timer 6 clock reset */
+#define RCC_APB1RSTR_TIM7RST ((uint32_t)0x00000020) /*!< Timer 7 clock reset */
+#define RCC_APB1RSTR_TIM14RST ((uint32_t)0x00000100) /*!< Timer 14 clock reset */
+#define RCC_APB1RSTR_WWDGRST ((uint32_t)0x00000800) /*!< Window Watchdog clock reset */
+#define RCC_APB1RSTR_SPI2RST ((uint32_t)0x00004000) /*!< SPI2 clock reset */
+#define RCC_APB1RSTR_USART2RST ((uint32_t)0x00020000) /*!< USART 2 clock reset */
+#define RCC_APB1RSTR_USART3RST ((uint32_t)0x00040000) /*!< USART 3 clock reset */
+#define RCC_APB1RSTR_USART4RST ((uint32_t)0x00080000) /*!< USART 4 clock reset */
+#define RCC_APB1RSTR_USART5RST ((uint32_t)0x00100000) /*!< USART 5 clock reset */
+#define RCC_APB1RSTR_I2C1RST ((uint32_t)0x00200000) /*!< I2C 1 clock reset */
+#define RCC_APB1RSTR_I2C2RST ((uint32_t)0x00400000) /*!< I2C 2 clock reset */
+#define RCC_APB1RSTR_CANRST ((uint32_t)0x02000000) /*!< CAN clock reset */
+#define RCC_APB1RSTR_CRSRST ((uint32_t)0x08000000) /*!< CRS clock reset */
+#define RCC_APB1RSTR_PWRRST ((uint32_t)0x10000000) /*!< PWR clock reset */
+#define RCC_APB1RSTR_DACRST ((uint32_t)0x20000000) /*!< DAC clock reset */
+#define RCC_APB1RSTR_CECRST ((uint32_t)0x40000000) /*!< CEC clock reset */
+
+/****************** Bit definition for RCC_AHBENR register *****************/
+#define RCC_AHBENR_DMAEN ((uint32_t)0x00000001) /*!< DMA1 clock enable */
+#define RCC_AHBENR_DMA2EN ((uint32_t)0x00000002) /*!< DMA2 clock enable */
+#define RCC_AHBENR_SRAMEN ((uint32_t)0x00000004) /*!< SRAM interface clock enable */
+#define RCC_AHBENR_FLITFEN ((uint32_t)0x00000010) /*!< FLITF clock enable */
+#define RCC_AHBENR_CRCEN ((uint32_t)0x00000040) /*!< CRC clock enable */
+#define RCC_AHBENR_GPIOAEN ((uint32_t)0x00020000) /*!< GPIOA clock enable */
+#define RCC_AHBENR_GPIOBEN ((uint32_t)0x00040000) /*!< GPIOB clock enable */
+#define RCC_AHBENR_GPIOCEN ((uint32_t)0x00080000) /*!< GPIOC clock enable */
+#define RCC_AHBENR_GPIODEN ((uint32_t)0x00100000) /*!< GPIOD clock enable */
+#define RCC_AHBENR_GPIOEEN ((uint32_t)0x00200000) /*!< GPIOE clock enable */
+#define RCC_AHBENR_GPIOFEN ((uint32_t)0x00400000) /*!< GPIOF clock enable */
+#define RCC_AHBENR_TSCEN ((uint32_t)0x01000000) /*!< TS controller clock enable */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_AHBENR_DMA1EN RCC_AHBENR_DMAEN /*!< DMA1 clock enable */
+#define RCC_AHBENR_TSEN RCC_AHBENR_TSCEN /*!< TS clock enable */
+
+/***************** Bit definition for RCC_APB2ENR register *****************/
+#define RCC_APB2ENR_SYSCFGCOMPEN ((uint32_t)0x00000001) /*!< SYSCFG and comparator clock enable */
+#define RCC_APB2ENR_ADCEN ((uint32_t)0x00000200) /*!< ADC1 clock enable */
+#define RCC_APB2ENR_USART8EN ((uint32_t)0x00000080) /*!< USART8 clock enable */
+#define RCC_APB2ENR_USART7EN ((uint32_t)0x00000040) /*!< USART7 clock enable */
+#define RCC_APB2ENR_USART6EN ((uint32_t)0x00000020) /*!< USART6 clock enable */
+#define RCC_APB2ENR_TIM1EN ((uint32_t)0x00000800) /*!< TIM1 clock enable */
+#define RCC_APB2ENR_SPI1EN ((uint32_t)0x00001000) /*!< SPI1 clock enable */
+#define RCC_APB2ENR_USART1EN ((uint32_t)0x00004000) /*!< USART1 clock enable */
+#define RCC_APB2ENR_TIM15EN ((uint32_t)0x00010000) /*!< TIM15 clock enable */
+#define RCC_APB2ENR_TIM16EN ((uint32_t)0x00020000) /*!< TIM16 clock enable */
+#define RCC_APB2ENR_TIM17EN ((uint32_t)0x00040000) /*!< TIM17 clock enable */
+#define RCC_APB2ENR_DBGMCUEN ((uint32_t)0x00400000) /*!< DBGMCU clock enable */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_APB2ENR_SYSCFGEN RCC_APB2ENR_SYSCFGCOMPEN /*!< SYSCFG clock enable */
+#define RCC_APB2ENR_ADC1EN RCC_APB2ENR_ADCEN /*!< ADC1 clock enable */
+
+/***************** Bit definition for RCC_APB1ENR register *****************/
+#define RCC_APB1ENR_TIM2EN ((uint32_t)0x00000001) /*!< Timer 2 clock enable */
+#define RCC_APB1ENR_TIM3EN ((uint32_t)0x00000002) /*!< Timer 3 clock enable */
+#define RCC_APB1ENR_TIM6EN ((uint32_t)0x00000010) /*!< Timer 6 clock enable */
+#define RCC_APB1ENR_TIM7EN ((uint32_t)0x00000020) /*!< Timer 7 clock enable */
+#define RCC_APB1ENR_TIM14EN ((uint32_t)0x00000100) /*!< Timer 14 clock enable */
+#define RCC_APB1ENR_WWDGEN ((uint32_t)0x00000800) /*!< Window Watchdog clock enable */
+#define RCC_APB1ENR_SPI2EN ((uint32_t)0x00004000) /*!< SPI2 clock enable */
+#define RCC_APB1ENR_USART2EN ((uint32_t)0x00020000) /*!< USART2 clock enable */
+#define RCC_APB1ENR_USART3EN ((uint32_t)0x00040000) /*!< USART3 clock enable */
+#define RCC_APB1ENR_USART4EN ((uint32_t)0x00080000) /*!< USART4 clock enable */
+#define RCC_APB1ENR_USART5EN ((uint32_t)0x00100000) /*!< USART5 clock enable */
+#define RCC_APB1ENR_I2C1EN ((uint32_t)0x00200000) /*!< I2C1 clock enable */
+#define RCC_APB1ENR_I2C2EN ((uint32_t)0x00400000) /*!< I2C2 clock enable */
+#define RCC_APB1ENR_CANEN ((uint32_t)0x02000000) /*!< CAN clock enable */
+#define RCC_APB1ENR_CRSEN ((uint32_t)0x08000000) /*!< CRS clock enable */
+#define RCC_APB1ENR_PWREN ((uint32_t)0x10000000) /*!< PWR clock enable */
+#define RCC_APB1ENR_DACEN ((uint32_t)0x20000000) /*!< DAC clock enable */
+#define RCC_APB1ENR_CECEN ((uint32_t)0x40000000) /*!< CEC clock enable */
+
+/******************* Bit definition for RCC_BDCR register ******************/
+#define RCC_BDCR_LSEON ((uint32_t)0x00000001) /*!< External Low Speed oscillator enable */
+#define RCC_BDCR_LSERDY ((uint32_t)0x00000002) /*!< External Low Speed oscillator Ready */
+#define RCC_BDCR_LSEBYP ((uint32_t)0x00000004) /*!< External Low Speed oscillator Bypass */
+
+#define RCC_BDCR_LSEDRV ((uint32_t)0x00000018) /*!< LSEDRV[1:0] bits (LSE Osc. drive capability) */
+#define RCC_BDCR_LSEDRV_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define RCC_BDCR_LSEDRV_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+
+#define RCC_BDCR_RTCSEL ((uint32_t)0x00000300) /*!< RTCSEL[1:0] bits (RTC clock source selection) */
+#define RCC_BDCR_RTCSEL_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define RCC_BDCR_RTCSEL_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+
+/*!< RTC configuration */
+#define RCC_BDCR_RTCSEL_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
+#define RCC_BDCR_RTCSEL_LSE ((uint32_t)0x00000100) /*!< LSE oscillator clock used as RTC clock */
+#define RCC_BDCR_RTCSEL_LSI ((uint32_t)0x00000200) /*!< LSI oscillator clock used as RTC clock */
+#define RCC_BDCR_RTCSEL_HSE ((uint32_t)0x00000300) /*!< HSE oscillator clock divided by 128 used as RTC clock */
+
+#define RCC_BDCR_RTCEN ((uint32_t)0x00008000) /*!< RTC clock enable */
+#define RCC_BDCR_BDRST ((uint32_t)0x00010000) /*!< Backup domain software reset */
+
+/******************* Bit definition for RCC_CSR register *******************/
+#define RCC_CSR_LSION ((uint32_t)0x00000001) /*!< Internal Low Speed oscillator enable */
+#define RCC_CSR_LSIRDY ((uint32_t)0x00000002) /*!< Internal Low Speed oscillator Ready */
+#define RCC_CSR_V18PWRRSTF ((uint32_t)0x00800000) /*!< V1.8 power domain reset flag */
+#define RCC_CSR_RMVF ((uint32_t)0x01000000) /*!< Remove reset flag */
+#define RCC_CSR_OBLRSTF ((uint32_t)0x02000000) /*!< OBL reset flag */
+#define RCC_CSR_PINRSTF ((uint32_t)0x04000000) /*!< PIN reset flag */
+#define RCC_CSR_PORRSTF ((uint32_t)0x08000000) /*!< POR/PDR reset flag */
+#define RCC_CSR_SFTRSTF ((uint32_t)0x10000000) /*!< Software Reset flag */
+#define RCC_CSR_IWDGRSTF ((uint32_t)0x20000000) /*!< Independent Watchdog reset flag */
+#define RCC_CSR_WWDGRSTF ((uint32_t)0x40000000) /*!< Window watchdog reset flag */
+#define RCC_CSR_LPWRRSTF ((uint32_t)0x80000000) /*!< Low-Power reset flag */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_CSR_OBL RCC_CSR_OBLRSTF /*!< OBL reset flag */
+
+/******************* Bit definition for RCC_AHBRSTR register ***************/
+#define RCC_AHBRSTR_GPIOARST ((uint32_t)0x00020000) /*!< GPIOA clock reset */
+#define RCC_AHBRSTR_GPIOBRST ((uint32_t)0x00040000) /*!< GPIOB clock reset */
+#define RCC_AHBRSTR_GPIOCRST ((uint32_t)0x00080000) /*!< GPIOC clock reset */
+#define RCC_AHBRSTR_GPIODRST ((uint32_t)0x00100000) /*!< GPIOD clock reset */
+#define RCC_AHBRSTR_GPIOERST ((uint32_t)0x00200000) /*!< GPIOE clock reset */
+#define RCC_AHBRSTR_GPIOFRST ((uint32_t)0x00400000) /*!< GPIOF clock reset */
+#define RCC_AHBRSTR_TSCRST ((uint32_t)0x01000000) /*!< TS clock reset */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_AHBRSTR_TSRST RCC_AHBRSTR_TSCRST /*!< TS clock reset */
+
+/******************* Bit definition for RCC_CFGR2 register *****************/
+/*!< PREDIV configuration */
+#define RCC_CFGR2_PREDIV ((uint32_t)0x0000000F) /*!< PREDIV[3:0] bits */
+#define RCC_CFGR2_PREDIV_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR2_PREDIV_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define RCC_CFGR2_PREDIV_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define RCC_CFGR2_PREDIV_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+
+#define RCC_CFGR2_PREDIV_DIV1 ((uint32_t)0x00000000) /*!< PREDIV input clock not divided */
+#define RCC_CFGR2_PREDIV_DIV2 ((uint32_t)0x00000001) /*!< PREDIV input clock divided by 2 */
+#define RCC_CFGR2_PREDIV_DIV3 ((uint32_t)0x00000002) /*!< PREDIV input clock divided by 3 */
+#define RCC_CFGR2_PREDIV_DIV4 ((uint32_t)0x00000003) /*!< PREDIV input clock divided by 4 */
+#define RCC_CFGR2_PREDIV_DIV5 ((uint32_t)0x00000004) /*!< PREDIV input clock divided by 5 */
+#define RCC_CFGR2_PREDIV_DIV6 ((uint32_t)0x00000005) /*!< PREDIV input clock divided by 6 */
+#define RCC_CFGR2_PREDIV_DIV7 ((uint32_t)0x00000006) /*!< PREDIV input clock divided by 7 */
+#define RCC_CFGR2_PREDIV_DIV8 ((uint32_t)0x00000007) /*!< PREDIV input clock divided by 8 */
+#define RCC_CFGR2_PREDIV_DIV9 ((uint32_t)0x00000008) /*!< PREDIV input clock divided by 9 */
+#define RCC_CFGR2_PREDIV_DIV10 ((uint32_t)0x00000009) /*!< PREDIV input clock divided by 10 */
+#define RCC_CFGR2_PREDIV_DIV11 ((uint32_t)0x0000000A) /*!< PREDIV input clock divided by 11 */
+#define RCC_CFGR2_PREDIV_DIV12 ((uint32_t)0x0000000B) /*!< PREDIV input clock divided by 12 */
+#define RCC_CFGR2_PREDIV_DIV13 ((uint32_t)0x0000000C) /*!< PREDIV input clock divided by 13 */
+#define RCC_CFGR2_PREDIV_DIV14 ((uint32_t)0x0000000D) /*!< PREDIV input clock divided by 14 */
+#define RCC_CFGR2_PREDIV_DIV15 ((uint32_t)0x0000000E) /*!< PREDIV input clock divided by 15 */
+#define RCC_CFGR2_PREDIV_DIV16 ((uint32_t)0x0000000F) /*!< PREDIV input clock divided by 16 */
+
+/******************* Bit definition for RCC_CFGR3 register *****************/
+/*!< USART1 Clock source selection */
+#define RCC_CFGR3_USART1SW ((uint32_t)0x00000003) /*!< USART1SW[1:0] bits */
+#define RCC_CFGR3_USART1SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR3_USART1SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+#define RCC_CFGR3_USART1SW_PCLK ((uint32_t)0x00000000) /*!< PCLK clock used as USART1 clock source */
+#define RCC_CFGR3_USART1SW_SYSCLK ((uint32_t)0x00000001) /*!< System clock selected as USART1 clock source */
+#define RCC_CFGR3_USART1SW_LSE ((uint32_t)0x00000002) /*!< LSE oscillator clock used as USART1 clock source */
+#define RCC_CFGR3_USART1SW_HSI ((uint32_t)0x00000003) /*!< HSI oscillator clock used as USART1 clock source */
+
+/*!< I2C1 Clock source selection */
+#define RCC_CFGR3_I2C1SW ((uint32_t)0x00000010) /*!< I2C1SW bits */
+
+#define RCC_CFGR3_I2C1SW_HSI ((uint32_t)0x00000000) /*!< HSI oscillator clock used as I2C1 clock source */
+#define RCC_CFGR3_I2C1SW_SYSCLK ((uint32_t)0x00000010) /*!< System clock selected as I2C1 clock source */
+
+/*!< CEC Clock source selection */
+#define RCC_CFGR3_CECSW ((uint32_t)0x00000040) /*!< CECSW bits */
+
+#define RCC_CFGR3_CECSW_HSI_DIV244 ((uint32_t)0x00000000) /*!< HSI clock divided by 244 selected as HDMI CEC entry clock source */
+#define RCC_CFGR3_CECSW_LSE ((uint32_t)0x00000040) /*!< LSE clock selected as HDMI CEC entry clock source */
+
+/*!< USART2 Clock source selection */
+#define RCC_CFGR3_USART2SW ((uint32_t)0x00030000) /*!< USART2SW[1:0] bits */
+#define RCC_CFGR3_USART2SW_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define RCC_CFGR3_USART2SW_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+
+#define RCC_CFGR3_USART2SW_PCLK ((uint32_t)0x00000000) /*!< PCLK clock used as USART2 clock source */
+#define RCC_CFGR3_USART2SW_SYSCLK ((uint32_t)0x00010000) /*!< System clock selected as USART2 clock source */
+#define RCC_CFGR3_USART2SW_LSE ((uint32_t)0x00020000) /*!< LSE oscillator clock used as USART2 clock source */
+#define RCC_CFGR3_USART2SW_HSI ((uint32_t)0x00030000) /*!< HSI oscillator clock used as USART2 clock source */
+
+/*!< USART3 Clock source selection */
+#define RCC_CFGR3_USART3SW ((uint32_t)0x000C0000) /*!< USART3SW[1:0] bits */
+#define RCC_CFGR3_USART3SW_0 ((uint32_t)0x00040000) /*!< Bit 0 */
+#define RCC_CFGR3_USART3SW_1 ((uint32_t)0x00080000) /*!< Bit 1 */
+
+#define RCC_CFGR3_USART3SW_PCLK ((uint32_t)0x00000000) /*!< PCLK clock used as USART3 clock source */
+#define RCC_CFGR3_USART3SW_SYSCLK ((uint32_t)0x00040000) /*!< System clock selected as USART3 clock source */
+#define RCC_CFGR3_USART3SW_LSE ((uint32_t)0x00080000) /*!< LSE oscillator clock used as USART3 clock source */
+#define RCC_CFGR3_USART3SW_HSI ((uint32_t)0x000C0000) /*!< HSI oscillator clock used as USART3 clock source */
+
+/******************* Bit definition for RCC_CR2 register *******************/
+#define RCC_CR2_HSI14ON ((uint32_t)0x00000001) /*!< Internal High Speed 14MHz clock enable */
+#define RCC_CR2_HSI14RDY ((uint32_t)0x00000002) /*!< Internal High Speed 14MHz clock ready flag */
+#define RCC_CR2_HSI14DIS ((uint32_t)0x00000004) /*!< Internal High Speed 14MHz clock disable */
+#define RCC_CR2_HSI14TRIM ((uint32_t)0x000000F8) /*!< Internal High Speed 14MHz clock trimming */
+#define RCC_CR2_HSI14CAL ((uint32_t)0x0000FF00) /*!< Internal High Speed 14MHz clock Calibration */
+#define RCC_CR2_HSI48ON ((uint32_t)0x00010000) /*!< Internal High Speed 48MHz clock enable */
+#define RCC_CR2_HSI48RDY ((uint32_t)0x00020000) /*!< Internal High Speed 48MHz clock ready flag */
+#define RCC_CR2_HSI48CAL ((uint32_t)0xFF000000) /*!< Internal High Speed 48MHz clock Calibration */
+
+/*****************************************************************************/
+/* */
+/* Real-Time Clock (RTC) */
+/* */
+/*****************************************************************************/
+/******************** Bits definition for RTC_TR register ******************/
+#define RTC_TR_PM ((uint32_t)0x00400000)
+#define RTC_TR_HT ((uint32_t)0x00300000)
+#define RTC_TR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TR_HU ((uint32_t)0x000F0000)
+#define RTC_TR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TR_MNT ((uint32_t)0x00007000)
+#define RTC_TR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TR_MNU ((uint32_t)0x00000F00)
+#define RTC_TR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TR_ST ((uint32_t)0x00000070)
+#define RTC_TR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TR_SU ((uint32_t)0x0000000F)
+#define RTC_TR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_DR register ******************/
+#define RTC_DR_YT ((uint32_t)0x00F00000)
+#define RTC_DR_YT_0 ((uint32_t)0x00100000)
+#define RTC_DR_YT_1 ((uint32_t)0x00200000)
+#define RTC_DR_YT_2 ((uint32_t)0x00400000)
+#define RTC_DR_YT_3 ((uint32_t)0x00800000)
+#define RTC_DR_YU ((uint32_t)0x000F0000)
+#define RTC_DR_YU_0 ((uint32_t)0x00010000)
+#define RTC_DR_YU_1 ((uint32_t)0x00020000)
+#define RTC_DR_YU_2 ((uint32_t)0x00040000)
+#define RTC_DR_YU_3 ((uint32_t)0x00080000)
+#define RTC_DR_WDU ((uint32_t)0x0000E000)
+#define RTC_DR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_DR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_DR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_DR_MT ((uint32_t)0x00001000)
+#define RTC_DR_MU ((uint32_t)0x00000F00)
+#define RTC_DR_MU_0 ((uint32_t)0x00000100)
+#define RTC_DR_MU_1 ((uint32_t)0x00000200)
+#define RTC_DR_MU_2 ((uint32_t)0x00000400)
+#define RTC_DR_MU_3 ((uint32_t)0x00000800)
+#define RTC_DR_DT ((uint32_t)0x00000030)
+#define RTC_DR_DT_0 ((uint32_t)0x00000010)
+#define RTC_DR_DT_1 ((uint32_t)0x00000020)
+#define RTC_DR_DU ((uint32_t)0x0000000F)
+#define RTC_DR_DU_0 ((uint32_t)0x00000001)
+#define RTC_DR_DU_1 ((uint32_t)0x00000002)
+#define RTC_DR_DU_2 ((uint32_t)0x00000004)
+#define RTC_DR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_CR register ******************/
+#define RTC_CR_COE ((uint32_t)0x00800000)
+#define RTC_CR_OSEL ((uint32_t)0x00600000)
+#define RTC_CR_OSEL_0 ((uint32_t)0x00200000)
+#define RTC_CR_OSEL_1 ((uint32_t)0x00400000)
+#define RTC_CR_POL ((uint32_t)0x00100000)
+#define RTC_CR_COSEL ((uint32_t)0x00080000)
+#define RTC_CR_BCK ((uint32_t)0x00040000)
+#define RTC_CR_SUB1H ((uint32_t)0x00020000)
+#define RTC_CR_ADD1H ((uint32_t)0x00010000)
+#define RTC_CR_TSIE ((uint32_t)0x00008000)
+#define RTC_CR_ALRAIE ((uint32_t)0x00001000)
+#define RTC_CR_TSE ((uint32_t)0x00000800)
+#define RTC_CR_WUTE ((uint32_t)0x00000400)
+#define RTC_CR_ALRAE ((uint32_t)0x00000100)
+#define RTC_CR_FMT ((uint32_t)0x00000040)
+#define RTC_CR_BYPSHAD ((uint32_t)0x00000020)
+#define RTC_CR_REFCKON ((uint32_t)0x00000010)
+#define RTC_CR_TSEDGE ((uint32_t)0x00000008)
+#define RTC_CR_WUCKSEL ((uint32_t)0x00000007)
+#define RTC_CR_WUCKSEL_0 ((uint32_t)0x00000001)
+#define RTC_CR_WUCKSEL_1 ((uint32_t)0x00000002)
+#define RTC_CR_WUCKSEL_2 ((uint32_t)0x00000004)
+
+/******************** Bits definition for RTC_ISR register *****************/
+#define RTC_ISR_RECALPF ((uint32_t)0x00010000)
+#define RTC_ISR_TAMP3F ((uint32_t)0x00008000)
+#define RTC_ISR_TAMP2F ((uint32_t)0x00004000)
+#define RTC_ISR_TAMP1F ((uint32_t)0x00002000)
+#define RTC_ISR_TSOVF ((uint32_t)0x00001000)
+#define RTC_ISR_TSF ((uint32_t)0x00000800)
+#define RTC_ISR_WUTF ((uint32_t)0x00000400)
+#define RTC_ISR_ALRAF ((uint32_t)0x00000100)
+#define RTC_ISR_INIT ((uint32_t)0x00000080)
+#define RTC_ISR_INITF ((uint32_t)0x00000040)
+#define RTC_ISR_RSF ((uint32_t)0x00000020)
+#define RTC_ISR_INITS ((uint32_t)0x00000010)
+#define RTC_ISR_SHPF ((uint32_t)0x00000008)
+#define RTC_ISR_WUTWF ((uint32_t)0x00000004)
+#define RTC_ISR_ALRAWF ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_PRER register ****************/
+#define RTC_PRER_PREDIV_A ((uint32_t)0x007F0000)
+#define RTC_PRER_PREDIV_S ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_WUTR register ****************/
+#define RTC_WUTR_WUT ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_ALRMAR register **************/
+#define RTC_ALRMAR_MSK4 ((uint32_t)0x80000000)
+#define RTC_ALRMAR_WDSEL ((uint32_t)0x40000000)
+#define RTC_ALRMAR_DT ((uint32_t)0x30000000)
+#define RTC_ALRMAR_DT_0 ((uint32_t)0x10000000)
+#define RTC_ALRMAR_DT_1 ((uint32_t)0x20000000)
+#define RTC_ALRMAR_DU ((uint32_t)0x0F000000)
+#define RTC_ALRMAR_DU_0 ((uint32_t)0x01000000)
+#define RTC_ALRMAR_DU_1 ((uint32_t)0x02000000)
+#define RTC_ALRMAR_DU_2 ((uint32_t)0x04000000)
+#define RTC_ALRMAR_DU_3 ((uint32_t)0x08000000)
+#define RTC_ALRMAR_MSK3 ((uint32_t)0x00800000)
+#define RTC_ALRMAR_PM ((uint32_t)0x00400000)
+#define RTC_ALRMAR_HT ((uint32_t)0x00300000)
+#define RTC_ALRMAR_HT_0 ((uint32_t)0x00100000)
+#define RTC_ALRMAR_HT_1 ((uint32_t)0x00200000)
+#define RTC_ALRMAR_HU ((uint32_t)0x000F0000)
+#define RTC_ALRMAR_HU_0 ((uint32_t)0x00010000)
+#define RTC_ALRMAR_HU_1 ((uint32_t)0x00020000)
+#define RTC_ALRMAR_HU_2 ((uint32_t)0x00040000)
+#define RTC_ALRMAR_HU_3 ((uint32_t)0x00080000)
+#define RTC_ALRMAR_MSK2 ((uint32_t)0x00008000)
+#define RTC_ALRMAR_MNT ((uint32_t)0x00007000)
+#define RTC_ALRMAR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_ALRMAR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_ALRMAR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_ALRMAR_MNU ((uint32_t)0x00000F00)
+#define RTC_ALRMAR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_ALRMAR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_ALRMAR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_ALRMAR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_ALRMAR_MSK1 ((uint32_t)0x00000080)
+#define RTC_ALRMAR_ST ((uint32_t)0x00000070)
+#define RTC_ALRMAR_ST_0 ((uint32_t)0x00000010)
+#define RTC_ALRMAR_ST_1 ((uint32_t)0x00000020)
+#define RTC_ALRMAR_ST_2 ((uint32_t)0x00000040)
+#define RTC_ALRMAR_SU ((uint32_t)0x0000000F)
+#define RTC_ALRMAR_SU_0 ((uint32_t)0x00000001)
+#define RTC_ALRMAR_SU_1 ((uint32_t)0x00000002)
+#define RTC_ALRMAR_SU_2 ((uint32_t)0x00000004)
+#define RTC_ALRMAR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_WPR register *****************/
+#define RTC_WPR_KEY ((uint32_t)0x000000FF)
+
+/******************** Bits definition for RTC_SSR register *****************/
+#define RTC_SSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_SHIFTR register **************/
+#define RTC_SHIFTR_SUBFS ((uint32_t)0x00007FFF)
+#define RTC_SHIFTR_ADD1S ((uint32_t)0x80000000)
+
+/******************** Bits definition for RTC_TSTR register ****************/
+#define RTC_TSTR_PM ((uint32_t)0x00400000)
+#define RTC_TSTR_HT ((uint32_t)0x00300000)
+#define RTC_TSTR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TSTR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TSTR_HU ((uint32_t)0x000F0000)
+#define RTC_TSTR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TSTR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TSTR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TSTR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TSTR_MNT ((uint32_t)0x00007000)
+#define RTC_TSTR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TSTR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TSTR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TSTR_MNU ((uint32_t)0x00000F00)
+#define RTC_TSTR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TSTR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TSTR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TSTR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TSTR_ST ((uint32_t)0x00000070)
+#define RTC_TSTR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TSTR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TSTR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TSTR_SU ((uint32_t)0x0000000F)
+#define RTC_TSTR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TSTR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TSTR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TSTR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSDR register ****************/
+#define RTC_TSDR_WDU ((uint32_t)0x0000E000)
+#define RTC_TSDR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_TSDR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_TSDR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_TSDR_MT ((uint32_t)0x00001000)
+#define RTC_TSDR_MU ((uint32_t)0x00000F00)
+#define RTC_TSDR_MU_0 ((uint32_t)0x00000100)
+#define RTC_TSDR_MU_1 ((uint32_t)0x00000200)
+#define RTC_TSDR_MU_2 ((uint32_t)0x00000400)
+#define RTC_TSDR_MU_3 ((uint32_t)0x00000800)
+#define RTC_TSDR_DT ((uint32_t)0x00000030)
+#define RTC_TSDR_DT_0 ((uint32_t)0x00000010)
+#define RTC_TSDR_DT_1 ((uint32_t)0x00000020)
+#define RTC_TSDR_DU ((uint32_t)0x0000000F)
+#define RTC_TSDR_DU_0 ((uint32_t)0x00000001)
+#define RTC_TSDR_DU_1 ((uint32_t)0x00000002)
+#define RTC_TSDR_DU_2 ((uint32_t)0x00000004)
+#define RTC_TSDR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSSSR register ***************/
+#define RTC_TSSSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_CALR register ****************/
+#define RTC_CALR_CALP ((uint32_t)0x00008000)
+#define RTC_CALR_CALW8 ((uint32_t)0x00004000)
+#define RTC_CALR_CALW16 ((uint32_t)0x00002000)
+#define RTC_CALR_CALM ((uint32_t)0x000001FF)
+#define RTC_CALR_CALM_0 ((uint32_t)0x00000001)
+#define RTC_CALR_CALM_1 ((uint32_t)0x00000002)
+#define RTC_CALR_CALM_2 ((uint32_t)0x00000004)
+#define RTC_CALR_CALM_3 ((uint32_t)0x00000008)
+#define RTC_CALR_CALM_4 ((uint32_t)0x00000010)
+#define RTC_CALR_CALM_5 ((uint32_t)0x00000020)
+#define RTC_CALR_CALM_6 ((uint32_t)0x00000040)
+#define RTC_CALR_CALM_7 ((uint32_t)0x00000080)
+#define RTC_CALR_CALM_8 ((uint32_t)0x00000100)
+
+/******************** Bits definition for RTC_TAFCR register ***************/
+#define RTC_TAFCR_ALARMOUTTYPE ((uint32_t)0x00040000)
+#define RTC_TAFCR_TAMPPUDIS ((uint32_t)0x00008000)
+#define RTC_TAFCR_TAMPPRCH ((uint32_t)0x00006000)
+#define RTC_TAFCR_TAMPPRCH_0 ((uint32_t)0x00002000)
+#define RTC_TAFCR_TAMPPRCH_1 ((uint32_t)0x00004000)
+#define RTC_TAFCR_TAMPFLT ((uint32_t)0x00001800)
+#define RTC_TAFCR_TAMPFLT_0 ((uint32_t)0x00000800)
+#define RTC_TAFCR_TAMPFLT_1 ((uint32_t)0x00001000)
+#define RTC_TAFCR_TAMPFREQ ((uint32_t)0x00000700)
+#define RTC_TAFCR_TAMPFREQ_0 ((uint32_t)0x00000100)
+#define RTC_TAFCR_TAMPFREQ_1 ((uint32_t)0x00000200)
+#define RTC_TAFCR_TAMPFREQ_2 ((uint32_t)0x00000400)
+#define RTC_TAFCR_TAMPTS ((uint32_t)0x00000080)
+#define RTC_TAFCR_TAMP3TRG ((uint32_t)0x00000040)
+#define RTC_TAFCR_TAMP3E ((uint32_t)0x00000020)
+#define RTC_TAFCR_TAMP2TRG ((uint32_t)0x00000010)
+#define RTC_TAFCR_TAMP2E ((uint32_t)0x00000008)
+#define RTC_TAFCR_TAMPIE ((uint32_t)0x00000004)
+#define RTC_TAFCR_TAMP1TRG ((uint32_t)0x00000002)
+#define RTC_TAFCR_TAMP1E ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_ALRMASSR register ************/
+#define RTC_ALRMASSR_MASKSS ((uint32_t)0x0F000000)
+#define RTC_ALRMASSR_MASKSS_0 ((uint32_t)0x01000000)
+#define RTC_ALRMASSR_MASKSS_1 ((uint32_t)0x02000000)
+#define RTC_ALRMASSR_MASKSS_2 ((uint32_t)0x04000000)
+#define RTC_ALRMASSR_MASKSS_3 ((uint32_t)0x08000000)
+#define RTC_ALRMASSR_SS ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_BKP0R register ***************/
+#define RTC_BKP0R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP1R register ***************/
+#define RTC_BKP1R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP2R register ***************/
+#define RTC_BKP2R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP3R register ***************/
+#define RTC_BKP3R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP4R register ***************/
+#define RTC_BKP4R ((uint32_t)0xFFFFFFFF)
+
+/******************** Number of backup registers ******************************/
+#define RTC_BKP_NUMBER ((uint32_t)0x00000005)
+
+/*****************************************************************************/
+/* */
+/* Serial Peripheral Interface (SPI) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for SPI_CR1 register *******************/
+#define SPI_CR1_CPHA ((uint32_t)0x00000001) /*!< Clock Phase */
+#define SPI_CR1_CPOL ((uint32_t)0x00000002) /*!< Clock Polarity */
+#define SPI_CR1_MSTR ((uint32_t)0x00000004) /*!< Master Selection */
+#define SPI_CR1_BR ((uint32_t)0x00000038) /*!< BR[2:0] bits (Baud Rate Control) */
+#define SPI_CR1_BR_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define SPI_CR1_BR_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define SPI_CR1_BR_2 ((uint32_t)0x00000020) /*!< Bit 2 */
+#define SPI_CR1_SPE ((uint32_t)0x00000040) /*!< SPI Enable */
+#define SPI_CR1_LSBFIRST ((uint32_t)0x00000080) /*!< Frame Format */
+#define SPI_CR1_SSI ((uint32_t)0x00000100) /*!< Internal slave select */
+#define SPI_CR1_SSM ((uint32_t)0x00000200) /*!< Software slave management */
+#define SPI_CR1_RXONLY ((uint32_t)0x00000400) /*!< Receive only */
+#define SPI_CR1_CRCL ((uint32_t)0x00000800) /*!< CRC Length */
+#define SPI_CR1_CRCNEXT ((uint32_t)0x00001000) /*!< Transmit CRC next */
+#define SPI_CR1_CRCEN ((uint32_t)0x00002000) /*!< Hardware CRC calculation enable */
+#define SPI_CR1_BIDIOE ((uint32_t)0x00004000) /*!< Output enable in bidirectional mode */
+#define SPI_CR1_BIDIMODE ((uint32_t)0x00008000) /*!< Bidirectional data mode enable */
+
+/******************* Bit definition for SPI_CR2 register *******************/
+#define SPI_CR2_RXDMAEN ((uint32_t)0x00000001) /*!< Rx Buffer DMA Enable */
+#define SPI_CR2_TXDMAEN ((uint32_t)0x00000002) /*!< Tx Buffer DMA Enable */
+#define SPI_CR2_SSOE ((uint32_t)0x00000004) /*!< SS Output Enable */
+#define SPI_CR2_NSSP ((uint32_t)0x00000008) /*!< NSS pulse management Enable */
+#define SPI_CR2_FRF ((uint32_t)0x00000010) /*!< Frame Format Enable */
+#define SPI_CR2_ERRIE ((uint32_t)0x00000020) /*!< Error Interrupt Enable */
+#define SPI_CR2_RXNEIE ((uint32_t)0x00000040) /*!< RX buffer Not Empty Interrupt Enable */
+#define SPI_CR2_TXEIE ((uint32_t)0x00000080) /*!< Tx buffer Empty Interrupt Enable */
+#define SPI_CR2_DS ((uint32_t)0x00000F00) /*!< DS[3:0] Data Size */
+#define SPI_CR2_DS_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define SPI_CR2_DS_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define SPI_CR2_DS_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define SPI_CR2_DS_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+#define SPI_CR2_FRXTH ((uint32_t)0x00001000) /*!< FIFO reception Threshold */
+#define SPI_CR2_LDMARX ((uint32_t)0x00002000) /*!< Last DMA transfer for reception */
+#define SPI_CR2_LDMATX ((uint32_t)0x00004000) /*!< Last DMA transfer for transmission */
+
+/******************** Bit definition for SPI_SR register *******************/
+#define SPI_SR_RXNE ((uint32_t)0x00000001) /*!< Receive buffer Not Empty */
+#define SPI_SR_TXE ((uint32_t)0x00000002) /*!< Transmit buffer Empty */
+#define SPI_SR_CHSIDE ((uint32_t)0x00000004) /*!< Channel side */
+#define SPI_SR_UDR ((uint32_t)0x00000008) /*!< Underrun flag */
+#define SPI_SR_CRCERR ((uint32_t)0x00000010) /*!< CRC Error flag */
+#define SPI_SR_MODF ((uint32_t)0x00000020) /*!< Mode fault */
+#define SPI_SR_OVR ((uint32_t)0x00000040) /*!< Overrun flag */
+#define SPI_SR_BSY ((uint32_t)0x00000080) /*!< Busy flag */
+#define SPI_SR_FRE ((uint32_t)0x00000100) /*!< TI frame format error */
+#define SPI_SR_FRLVL ((uint32_t)0x00000600) /*!< FIFO Reception Level */
+#define SPI_SR_FRLVL_0 ((uint32_t)0x00000200) /*!< Bit 0 */
+#define SPI_SR_FRLVL_1 ((uint32_t)0x00000400) /*!< Bit 1 */
+#define SPI_SR_FTLVL ((uint32_t)0x00001800) /*!< FIFO Transmission Level */
+#define SPI_SR_FTLVL_0 ((uint32_t)0x00000800) /*!< Bit 0 */
+#define SPI_SR_FTLVL_1 ((uint32_t)0x00001000) /*!< Bit 1 */
+
+/******************** Bit definition for SPI_DR register *******************/
+#define SPI_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data Register */
+
+/******************* Bit definition for SPI_CRCPR register *****************/
+#define SPI_CRCPR_CRCPOLY ((uint32_t)0xFFFFFFFF) /*!< CRC polynomial register */
+
+/****************** Bit definition for SPI_RXCRCR register *****************/
+#define SPI_RXCRCR_RXCRC ((uint32_t)0xFFFFFFFF) /*!< Rx CRC Register */
+
+/****************** Bit definition for SPI_TXCRCR register *****************/
+#define SPI_TXCRCR_TXCRC ((uint32_t)0xFFFFFFFF) /*!< Tx CRC Register */
+
+/****************** Bit definition for SPI_I2SCFGR register ****************/
+#define SPI_I2SCFGR_CHLEN ((uint32_t)0x00000001) /*!<Channel length (number of bits per audio channel) */
+#define SPI_I2SCFGR_DATLEN ((uint32_t)0x00000006) /*!<DATLEN[1:0] bits (Data length to be transferred) */
+#define SPI_I2SCFGR_DATLEN_0 ((uint32_t)0x00000002) /*!<Bit 0 */
+#define SPI_I2SCFGR_DATLEN_1 ((uint32_t)0x00000004) /*!<Bit 1 */
+#define SPI_I2SCFGR_CKPOL ((uint32_t)0x00000008) /*!<steady state clock polarity */
+#define SPI_I2SCFGR_I2SSTD ((uint32_t)0x00000030) /*!<I2SSTD[1:0] bits (I2S standard selection) */
+#define SPI_I2SCFGR_I2SSTD_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SSTD_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define SPI_I2SCFGR_PCMSYNC ((uint32_t)0x00000080) /*!<PCM frame synchronization */
+#define SPI_I2SCFGR_I2SCFG ((uint32_t)0x00000300) /*!<I2SCFG[1:0] bits (I2S configuration mode) */
+#define SPI_I2SCFGR_I2SCFG_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SCFG_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define SPI_I2SCFGR_I2SE ((uint32_t)0x00000400) /*!<I2S Enable */
+#define SPI_I2SCFGR_I2SMOD ((uint32_t)0x00000800) /*!<I2S mode selection */
+
+/****************** Bit definition for SPI_I2SPR register ******************/
+#define SPI_I2SPR_I2SDIV ((uint32_t)0x000000FF) /*!<I2S Linear prescaler */
+#define SPI_I2SPR_ODD ((uint32_t)0x00000100) /*!<Odd factor for the prescaler */
+#define SPI_I2SPR_MCKOE ((uint32_t)0x00000200) /*!<Master Clock Output Enable */
+
+/*****************************************************************************/
+/* */
+/* System Configuration (SYSCFG) */
+/* */
+/*****************************************************************************/
+/***************** Bit definition for SYSCFG_CFGR1 register ****************/
+#define SYSCFG_CFGR1_MEM_MODE ((uint32_t)0x00000003) /*!< SYSCFG_Memory Remap Config */
+#define SYSCFG_CFGR1_MEM_MODE_0 ((uint32_t)0x00000001) /*!< SYSCFG_Memory Remap Config Bit 0 */
+#define SYSCFG_CFGR1_MEM_MODE_1 ((uint32_t)0x00000002) /*!< SYSCFG_Memory Remap Config Bit 1 */
+#define SYSCFG_CFGR1_IRDA_ENV_SEL ((uint32_t)0x000000C0) /*!< IRDA_SEL_ENV config */
+#define SYSCFG_CFGR1_IRDA_ENV_SEL_0 ((uint32_t)0x00000040) /*!< IRDA_SEL_ENV Bit 0 */
+#define SYSCFG_CFGR1_IRDA_ENV_SEL_1 ((uint32_t)0x00000080) /*!< IRDA_SEL_ENV Bit 1 */
+#define SYSCFG_CFGR1_I2C_FMP_PB6 ((uint32_t)0x00010000) /*!< I2C PB6 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB7 ((uint32_t)0x00020000) /*!< I2C PB7 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB8 ((uint32_t)0x00040000) /*!< I2C PB8 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB9 ((uint32_t)0x00080000) /*!< I2C PB9 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_I2C1 ((uint32_t)0x00100000) /*!< Enable Fast Mode Plus on PB10, PB11, PF6 and PF7 */
+#define SYSCFG_CFGR1_I2C_FMP_I2C2 ((uint32_t)0x00200000) /*!< Enable I2C2 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PA9 ((uint32_t)0x00400000) /*!< Enable Fast Mode Plus on PA9 */
+#define SYSCFG_CFGR1_I2C_FMP_PA10 ((uint32_t)0x00800000) /*!< Enable Fast Mode Plus on PA10 */
+
+/***************** Bit definition for SYSCFG_EXTICR1 register **************/
+#define SYSCFG_EXTICR1_EXTI0 ((uint16_t)0x000F) /*!< EXTI 0 configuration */
+#define SYSCFG_EXTICR1_EXTI1 ((uint16_t)0x00F0) /*!< EXTI 1 configuration */
+#define SYSCFG_EXTICR1_EXTI2 ((uint16_t)0x0F00) /*!< EXTI 2 configuration */
+#define SYSCFG_EXTICR1_EXTI3 ((uint16_t)0xF000) /*!< EXTI 3 configuration */
+
+/**
+ * @brief EXTI0 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI0_PA ((uint16_t)0x0000) /*!< PA[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PB ((uint16_t)0x0001) /*!< PB[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PC ((uint16_t)0x0002) /*!< PC[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PD ((uint16_t)0x0003) /*!< PD[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PE ((uint16_t)0x0004) /*!< PE[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PF ((uint16_t)0x0005) /*!< PF[0] pin */
+
+/**
+ * @brief EXTI1 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI1_PA ((uint16_t)0x0000) /*!< PA[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PB ((uint16_t)0x0010) /*!< PB[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PC ((uint16_t)0x0020) /*!< PC[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PD ((uint16_t)0x0030) /*!< PD[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PE ((uint16_t)0x0040) /*!< PE[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PF ((uint16_t)0x0050) /*!< PF[1] pin */
+
+/**
+ * @brief EXTI2 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI2_PA ((uint16_t)0x0000) /*!< PA[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PB ((uint16_t)0x0100) /*!< PB[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PC ((uint16_t)0x0200) /*!< PC[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PD ((uint16_t)0x0300) /*!< PD[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PE ((uint16_t)0x0400) /*!< PE[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PF ((uint16_t)0x0500) /*!< PF[2] pin */
+
+/**
+ * @brief EXTI3 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI3_PA ((uint16_t)0x0000) /*!< PA[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PB ((uint16_t)0x1000) /*!< PB[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PC ((uint16_t)0x2000) /*!< PC[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PD ((uint16_t)0x3000) /*!< PD[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PE ((uint16_t)0x4000) /*!< PE[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PF ((uint16_t)0x5000) /*!< PF[3] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR2 register **************/
+#define SYSCFG_EXTICR2_EXTI4 ((uint16_t)0x000F) /*!< EXTI 4 configuration */
+#define SYSCFG_EXTICR2_EXTI5 ((uint16_t)0x00F0) /*!< EXTI 5 configuration */
+#define SYSCFG_EXTICR2_EXTI6 ((uint16_t)0x0F00) /*!< EXTI 6 configuration */
+#define SYSCFG_EXTICR2_EXTI7 ((uint16_t)0xF000) /*!< EXTI 7 configuration */
+
+/**
+ * @brief EXTI4 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI4_PA ((uint16_t)0x0000) /*!< PA[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PB ((uint16_t)0x0001) /*!< PB[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PC ((uint16_t)0x0002) /*!< PC[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PD ((uint16_t)0x0003) /*!< PD[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PE ((uint16_t)0x0004) /*!< PE[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PF ((uint16_t)0x0005) /*!< PF[4] pin */
+
+/**
+ * @brief EXTI5 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI5_PA ((uint16_t)0x0000) /*!< PA[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PB ((uint16_t)0x0010) /*!< PB[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PC ((uint16_t)0x0020) /*!< PC[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PD ((uint16_t)0x0030) /*!< PD[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PE ((uint16_t)0x0040) /*!< PE[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PF ((uint16_t)0x0050) /*!< PF[5] pin */
+
+/**
+ * @brief EXTI6 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI6_PA ((uint16_t)0x0000) /*!< PA[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PB ((uint16_t)0x0100) /*!< PB[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PC ((uint16_t)0x0200) /*!< PC[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PD ((uint16_t)0x0300) /*!< PD[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PE ((uint16_t)0x0400) /*!< PE[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PF ((uint16_t)0x0500) /*!< PF[6] pin */
+
+/**
+ * @brief EXTI7 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI7_PA ((uint16_t)0x0000) /*!< PA[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PB ((uint16_t)0x1000) /*!< PB[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PC ((uint16_t)0x2000) /*!< PC[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PD ((uint16_t)0x3000) /*!< PD[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PE ((uint16_t)0x4000) /*!< PE[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PF ((uint16_t)0x5000) /*!< PF[7] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR3 register **************/
+#define SYSCFG_EXTICR3_EXTI8 ((uint16_t)0x000F) /*!< EXTI 8 configuration */
+#define SYSCFG_EXTICR3_EXTI9 ((uint16_t)0x00F0) /*!< EXTI 9 configuration */
+#define SYSCFG_EXTICR3_EXTI10 ((uint16_t)0x0F00) /*!< EXTI 10 configuration */
+#define SYSCFG_EXTICR3_EXTI11 ((uint16_t)0xF000) /*!< EXTI 11 configuration */
+
+/**
+ * @brief EXTI8 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI8_PA ((uint16_t)0x0000) /*!< PA[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PB ((uint16_t)0x0001) /*!< PB[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PC ((uint16_t)0x0002) /*!< PC[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PD ((uint16_t)0x0003) /*!< PD[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PE ((uint16_t)0x0004) /*!< PE[8] pin */
+
+/**
+ * @brief EXTI9 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI9_PA ((uint16_t)0x0000) /*!< PA[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PB ((uint16_t)0x0010) /*!< PB[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PC ((uint16_t)0x0020) /*!< PC[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PD ((uint16_t)0x0030) /*!< PD[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PE ((uint16_t)0x0040) /*!< PE[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PF ((uint16_t)0x0050) /*!< PF[9] pin */
+
+/**
+ * @brief EXTI10 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI10_PA ((uint16_t)0x0000) /*!< PA[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PB ((uint16_t)0x0100) /*!< PB[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PC ((uint16_t)0x0200) /*!< PC[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PD ((uint16_t)0x0300) /*!< PE[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PE ((uint16_t)0x0400) /*!< PD[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PF ((uint16_t)0x0500) /*!< PF[10] pin */
+
+/**
+ * @brief EXTI11 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI11_PA ((uint16_t)0x0000) /*!< PA[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PB ((uint16_t)0x1000) /*!< PB[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PC ((uint16_t)0x2000) /*!< PC[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PD ((uint16_t)0x3000) /*!< PD[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PE ((uint16_t)0x4000) /*!< PE[11] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR4 register **************/
+#define SYSCFG_EXTICR4_EXTI12 ((uint16_t)0x000F) /*!< EXTI 12 configuration */
+#define SYSCFG_EXTICR4_EXTI13 ((uint16_t)0x00F0) /*!< EXTI 13 configuration */
+#define SYSCFG_EXTICR4_EXTI14 ((uint16_t)0x0F00) /*!< EXTI 14 configuration */
+#define SYSCFG_EXTICR4_EXTI15 ((uint16_t)0xF000) /*!< EXTI 15 configuration */
+
+/**
+ * @brief EXTI12 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI12_PA ((uint16_t)0x0000) /*!< PA[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PB ((uint16_t)0x0001) /*!< PB[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PC ((uint16_t)0x0002) /*!< PC[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PD ((uint16_t)0x0003) /*!< PD[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PE ((uint16_t)0x0004) /*!< PE[12] pin */
+
+/**
+ * @brief EXTI13 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI13_PA ((uint16_t)0x0000) /*!< PA[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PB ((uint16_t)0x0010) /*!< PB[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PC ((uint16_t)0x0020) /*!< PC[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PD ((uint16_t)0x0030) /*!< PD[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PE ((uint16_t)0x0040) /*!< PE[13] pin */
+
+/**
+ * @brief EXTI14 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI14_PA ((uint16_t)0x0000) /*!< PA[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PB ((uint16_t)0x0100) /*!< PB[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PC ((uint16_t)0x0200) /*!< PC[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PD ((uint16_t)0x0300) /*!< PD[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PE ((uint16_t)0x0400) /*!< PE[14] pin */
+
+/**
+ * @brief EXTI15 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI15_PA ((uint16_t)0x0000) /*!< PA[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PB ((uint16_t)0x1000) /*!< PB[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PC ((uint16_t)0x2000) /*!< PC[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PD ((uint16_t)0x3000) /*!< PD[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PE ((uint16_t)0x4000) /*!< PE[15] pin */
+
+/***************** Bit definition for SYSCFG_CFGR2 register ****************/
+#define SYSCFG_CFGR2_LOCKUP_LOCK ((uint32_t)0x00000001) /*!< Enables and locks the LOCKUP (Hardfault) output of CortexM0 with Break Input of TIMER1 */
+#define SYSCFG_CFGR2_SRAM_PARITY_LOCK ((uint32_t)0x00000002) /*!< Enables and locks the SRAM_PARITY error signal with Break Input of TIMER1 */
+#define SYSCFG_CFGR2_SRAM_PEF ((uint32_t)0x00000100) /*!< SRAM Parity error flag */
+#define SYSCFG_CFGR2_SRAM_PE SYSCFG_CFGR2_SRAM_PEF /*!< SRAM Parity error flag (define maintained for legacy purpose) */
+
+/***************** Bit definition for SYSCFG_xxx ISR Wrapper register ****************/
+#define SYSCFG_ITLINE0_SR_EWDG ((uint32_t)0x00000001) /*!< EWDG interrupt */
+#define SYSCFG_ITLINE1_SR_VDDIO2 ((uint32_t)0x00000002) /*!< VDDIO2 -> exti[16] Interrupt */
+#define SYSCFG_ITLINE2_SR_RTC_WAKEUP ((uint32_t)0x00000001) /*!< RTC WAKEUP -> exti[20] Interrupt */
+#define SYSCFG_ITLINE2_SR_RTC_TSTAMP ((uint32_t)0x00000002) /*!< RTC Time Stamp -> exti[19] interrupt */
+#define SYSCFG_ITLINE2_SR_RTC_ALRA ((uint32_t)0x00000003) /*!< RTC Alarm -> exti[17] interrupt .... */
+#define SYSCFG_ITLINE3_SR_FLASH_ITF ((uint32_t)0x00000001) /*!< Flash ITF Interrupt */
+#define SYSCFG_ITLINE4_SR_CRS ((uint32_t)0x00000001) /*!< CRS interrupt */
+#define SYSCFG_ITLINE4_SR_CLK_CTRL ((uint32_t)0x00000002) /*!< CLK CTRL interrupt */
+#define SYSCFG_ITLINE5_SR_EXTI0 ((uint32_t)0x00000001) /*!< External Interrupt 0 */
+#define SYSCFG_ITLINE5_SR_EXTI1 ((uint32_t)0x00000002) /*!< External Interrupt 1 */
+#define SYSCFG_ITLINE6_SR_EXTI2 ((uint32_t)0x00000001) /*!< External Interrupt 2 */
+#define SYSCFG_ITLINE6_SR_EXTI3 ((uint32_t)0x00000002) /*!< External Interrupt 3 */
+#define SYSCFG_ITLINE7_SR_EXTI4 ((uint32_t)0x00000001) /*!< External Interrupt 15 to 4 */
+#define SYSCFG_ITLINE7_SR_EXTI5 ((uint32_t)0x00000002) /*!< External Interrupt 15 to 4 */
+#define SYSCFG_ITLINE7_SR_EXTI6 ((uint32_t)0x00000004) /*!< External Interrupt 15 to 4 */
+#define SYSCFG_ITLINE7_SR_EXTI7 ((uint32_t)0x00000008) /*!< External Interrupt 15 to 4 */
+#define SYSCFG_ITLINE7_SR_EXTI8 ((uint32_t)0x00000010) /*!< External Interrupt 15 to 4 */
+#define SYSCFG_ITLINE7_SR_EXTI9 ((uint32_t)0x00000020) /*!< External Interrupt 15 to 4 */
+#define SYSCFG_ITLINE7_SR_EXTI10 ((uint32_t)0x00000040) /*!< External Interrupt 15 to 4 */
+#define SYSCFG_ITLINE7_SR_EXTI11 ((uint32_t)0x00000080) /*!< External Interrupt 15 to 4 */
+#define SYSCFG_ITLINE7_SR_EXTI12 ((uint32_t)0x00000100) /*!< External Interrupt 15 to 4 */
+#define SYSCFG_ITLINE7_SR_EXTI13 ((uint32_t)0x00000200) /*!< External Interrupt 15 to 4 */
+#define SYSCFG_ITLINE7_SR_EXTI14 ((uint32_t)0x00000400) /*!< External Interrupt 15 to 4 */
+#define SYSCFG_ITLINE7_SR_EXTI15 ((uint32_t)0x00000800) /*!< External Interrupt 15 to 4 */
+#define SYSCFG_ITLINE8_SR_TSC_EOA ((uint32_t)0x00000001) /*!< Touch control EOA Interrupt */
+#define SYSCFG_ITLINE8_SR_TSC_MCE ((uint32_t)0x00000002) /*!< Touch control MCE Interrupt */
+#define SYSCFG_ITLINE9_SR_DMA1_CH1 ((uint32_t)0x00000001) /*!< DMA1 Channel 1 Interrupt */
+#define SYSCFG_ITLINE10_SR_DMA1_CH2 ((uint32_t)0x00000001) /*!< DMA1 Channel 2 Interrupt */
+#define SYSCFG_ITLINE10_SR_DMA1_CH3 ((uint32_t)0x00000002) /*!< DMA2 Channel 3 Interrupt */
+#define SYSCFG_ITLINE10_SR_DMA2_CH1 ((uint32_t)0x00000004) /*!< DMA2 Channel 1 Interrupt */
+#define SYSCFG_ITLINE10_SR_DMA2_CH2 ((uint32_t)0x00000008) /*!< DMA2 Channel 2 Interrupt */
+#define SYSCFG_ITLINE11_SR_DMA1_CH4 ((uint32_t)0x00000001) /*!< DMA1 Channel 4 Interrupt */
+#define SYSCFG_ITLINE11_SR_DMA1_CH5 ((uint32_t)0x00000002) /*!< DMA1 Channel 5 Interrupt */
+#define SYSCFG_ITLINE11_SR_DMA1_CH6 ((uint32_t)0x00000004) /*!< DMA1 Channel 6 Interrupt */
+#define SYSCFG_ITLINE11_SR_DMA1_CH7 ((uint32_t)0x00000008) /*!< DMA1 Channel 7 Interrupt */
+#define SYSCFG_ITLINE11_SR_DMA2_CH3 ((uint32_t)0x00000010) /*!< DMA2 Channel 3 Interrupt */
+#define SYSCFG_ITLINE11_SR_DMA2_CH4 ((uint32_t)0x00000020) /*!< DMA2 Channel 4 Interrupt */
+#define SYSCFG_ITLINE11_SR_DMA2_CH5 ((uint32_t)0x00000040) /*!< DMA2 Channel 5 Interrupt */
+#define SYSCFG_ITLINE12_SR_ADC ((uint32_t)0x00000001) /*!< ADC Interrupt */
+#define SYSCFG_ITLINE12_SR_COMP1 ((uint32_t)0x00000002) /*!< COMP1 Interrupt -> exti[21] */
+#define SYSCFG_ITLINE12_SR_COMP2 ((uint32_t)0x00000004) /*!< COMP2 Interrupt -> exti[22] */
+#define SYSCFG_ITLINE13_SR_TIM1_BRK ((uint32_t)0x00000001) /*!< TIM1 BRK Interrupt */
+#define SYSCFG_ITLINE13_SR_TIM1_UPD ((uint32_t)0x00000002) /*!< TIM1 UPD Interrupt */
+#define SYSCFG_ITLINE13_SR_TIM1_TRG ((uint32_t)0x00000004) /*!< TIM1 TRG Interrupt */
+#define SYSCFG_ITLINE13_SR_TIM1_CCU ((uint32_t)0x00000008) /*!< TIM1 CCU Interrupt */
+#define SYSCFG_ITLINE14_SR_TIM1_CC ((uint32_t)0x00000001) /*!< TIM1 CC Interrupt */
+#define SYSCFG_ITLINE15_SR_TIM2_GLB ((uint32_t)0x00000001) /*!< TIM2 GLB Interrupt */
+#define SYSCFG_ITLINE16_SR_TIM3_GLB ((uint32_t)0x00000001) /*!< TIM3 GLB Interrupt */
+#define SYSCFG_ITLINE17_SR_DAC ((uint32_t)0x00000001) /*!< DAC Interrupt */
+#define SYSCFG_ITLINE17_SR_TIM6_GLB ((uint32_t)0x00000002) /*!< TIM6 GLB Interrupt */
+#define SYSCFG_ITLINE18_SR_TIM7_GLB ((uint32_t)0x00000001) /*!< TIM7 GLB Interrupt */
+#define SYSCFG_ITLINE19_SR_TIM14_GLB ((uint32_t)0x00000001) /*!< TIM14 GLB Interrupt */
+#define SYSCFG_ITLINE20_SR_TIM15_GLB ((uint32_t)0x00000001) /*!< TIM15 GLB Interrupt */
+#define SYSCFG_ITLINE21_SR_TIM16_GLB ((uint32_t)0x00000001) /*!< TIM16 GLB Interrupt */
+#define SYSCFG_ITLINE22_SR_TIM17_GLB ((uint32_t)0x00000001) /*!< TIM17 GLB Interrupt */
+#define SYSCFG_ITLINE23_SR_I2C1_GLB ((uint32_t)0x00000001) /*!< I2C1 GLB Interrupt -> exti[23] */
+#define SYSCFG_ITLINE24_SR_I2C2_GLB ((uint32_t)0x00000001) /*!< I2C2 GLB Interrupt */
+#define SYSCFG_ITLINE25_SR_SPI1 ((uint32_t)0x00000001) /*!< SPI1 Interrupt */
+#define SYSCFG_ITLINE26_SR_SPI2 ((uint32_t)0x00000001) /*!< SPI2 Interrupt */
+#define SYSCFG_ITLINE27_SR_USART1_GLB ((uint32_t)0x00000001) /*!< USART1 GLB Interrupt -> exti[25] */
+#define SYSCFG_ITLINE28_SR_USART2_GLB ((uint32_t)0x00000001) /*!< USART2 GLB Interrupt -> exti[26] */
+#define SYSCFG_ITLINE29_SR_USART3_GLB ((uint32_t)0x00000001) /*!< USART3 GLB Interrupt -> exti[28] */
+#define SYSCFG_ITLINE29_SR_USART4_GLB ((uint32_t)0x00000002) /*!< USART4 GLB Interrupt */
+#define SYSCFG_ITLINE29_SR_USART5_GLB ((uint32_t)0x00000004) /*!< USART5 GLB Interrupt */
+#define SYSCFG_ITLINE29_SR_USART6_GLB ((uint32_t)0x00000008) /*!< USART6 GLB Interrupt */
+#define SYSCFG_ITLINE29_SR_USART7_GLB ((uint32_t)0x00000010) /*!< USART7 GLB Interrupt */
+#define SYSCFG_ITLINE29_SR_USART8_GLB ((uint32_t)0x00000020) /*!< USART8 GLB Interrupt */
+#define SYSCFG_ITLINE30_SR_CAN ((uint32_t)0x00000001) /*!< CAN Interrupt */
+#define SYSCFG_ITLINE30_SR_CEC ((uint32_t)0x00000002) /*!< CEC Interrupt */
+
+/*****************************************************************************/
+/* */
+/* Timers (TIM) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for TIM_CR1 register *******************/
+#define TIM_CR1_CEN ((uint32_t)0x00000001) /*!<Counter enable */
+#define TIM_CR1_UDIS ((uint32_t)0x00000002) /*!<Update disable */
+#define TIM_CR1_URS ((uint32_t)0x00000004) /*!<Update request source */
+#define TIM_CR1_OPM ((uint32_t)0x00000008) /*!<One pulse mode */
+#define TIM_CR1_DIR ((uint32_t)0x00000010) /*!<Direction */
+
+#define TIM_CR1_CMS ((uint32_t)0x00000060) /*!<CMS[1:0] bits (Center-aligned mode selection) */
+#define TIM_CR1_CMS_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define TIM_CR1_CMS_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+
+#define TIM_CR1_ARPE ((uint32_t)0x00000080) /*!<Auto-reload preload enable */
+
+#define TIM_CR1_CKD ((uint32_t)0x00000300) /*!<CKD[1:0] bits (clock division) */
+#define TIM_CR1_CKD_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CR1_CKD_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+/******************* Bit definition for TIM_CR2 register *******************/
+#define TIM_CR2_CCPC ((uint32_t)0x00000001) /*!<Capture/Compare Preloaded Control */
+#define TIM_CR2_CCUS ((uint32_t)0x00000004) /*!<Capture/Compare Control Update Selection */
+#define TIM_CR2_CCDS ((uint32_t)0x00000008) /*!<Capture/Compare DMA Selection */
+
+#define TIM_CR2_MMS ((uint32_t)0x00000070) /*!<MMS[2:0] bits (Master Mode Selection) */
+#define TIM_CR2_MMS_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CR2_MMS_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CR2_MMS_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CR2_TI1S ((uint32_t)0x00000080) /*!<TI1 Selection */
+#define TIM_CR2_OIS1 ((uint32_t)0x00000100) /*!<Output Idle state 1 (OC1 output) */
+#define TIM_CR2_OIS1N ((uint32_t)0x00000200) /*!<Output Idle state 1 (OC1N output) */
+#define TIM_CR2_OIS2 ((uint32_t)0x00000400) /*!<Output Idle state 2 (OC2 output) */
+#define TIM_CR2_OIS2N ((uint32_t)0x00000800) /*!<Output Idle state 2 (OC2N output) */
+#define TIM_CR2_OIS3 ((uint32_t)0x00001000) /*!<Output Idle state 3 (OC3 output) */
+#define TIM_CR2_OIS3N ((uint32_t)0x00002000) /*!<Output Idle state 3 (OC3N output) */
+#define TIM_CR2_OIS4 ((uint32_t)0x00004000) /*!<Output Idle state 4 (OC4 output) */
+
+/******************* Bit definition for TIM_SMCR register ******************/
+#define TIM_SMCR_SMS ((uint32_t)0x00000007) /*!<SMS[2:0] bits (Slave mode selection) */
+#define TIM_SMCR_SMS_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_SMCR_SMS_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_SMCR_SMS_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+
+#define TIM_SMCR_OCCS ((uint32_t)0x00000008) /*!< OCREF clear selection */
+
+#define TIM_SMCR_TS ((uint32_t)0x00000070) /*!<TS[2:0] bits (Trigger selection) */
+#define TIM_SMCR_TS_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_SMCR_TS_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_SMCR_TS_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_SMCR_MSM ((uint32_t)0x00000080) /*!<Master/slave mode */
+
+#define TIM_SMCR_ETF ((uint32_t)0x00000F00) /*!<ETF[3:0] bits (External trigger filter) */
+#define TIM_SMCR_ETF_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_SMCR_ETF_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define TIM_SMCR_ETF_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define TIM_SMCR_ETF_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+
+#define TIM_SMCR_ETPS ((uint32_t)0x00003000) /*!<ETPS[1:0] bits (External trigger prescaler) */
+#define TIM_SMCR_ETPS_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_SMCR_ETPS_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+
+#define TIM_SMCR_ECE ((uint32_t)0x00004000) /*!<External clock enable */
+#define TIM_SMCR_ETP ((uint32_t)0x00008000) /*!<External trigger polarity */
+
+/******************* Bit definition for TIM_DIER register ******************/
+#define TIM_DIER_UIE ((uint32_t)0x00000001) /*!<Update interrupt enable */
+#define TIM_DIER_CC1IE ((uint32_t)0x00000002) /*!<Capture/Compare 1 interrupt enable */
+#define TIM_DIER_CC2IE ((uint32_t)0x00000004) /*!<Capture/Compare 2 interrupt enable */
+#define TIM_DIER_CC3IE ((uint32_t)0x00000008) /*!<Capture/Compare 3 interrupt enable */
+#define TIM_DIER_CC4IE ((uint32_t)0x00000010) /*!<Capture/Compare 4 interrupt enable */
+#define TIM_DIER_COMIE ((uint32_t)0x00000020) /*!<COM interrupt enable */
+#define TIM_DIER_TIE ((uint32_t)0x00000040) /*!<Trigger interrupt enable */
+#define TIM_DIER_BIE ((uint32_t)0x00000080) /*!<Break interrupt enable */
+#define TIM_DIER_UDE ((uint32_t)0x00000100) /*!<Update DMA request enable */
+#define TIM_DIER_CC1DE ((uint32_t)0x00000200) /*!<Capture/Compare 1 DMA request enable */
+#define TIM_DIER_CC2DE ((uint32_t)0x00000400) /*!<Capture/Compare 2 DMA request enable */
+#define TIM_DIER_CC3DE ((uint32_t)0x00000800) /*!<Capture/Compare 3 DMA request enable */
+#define TIM_DIER_CC4DE ((uint32_t)0x00001000) /*!<Capture/Compare 4 DMA request enable */
+#define TIM_DIER_COMDE ((uint32_t)0x00002000) /*!<COM DMA request enable */
+#define TIM_DIER_TDE ((uint32_t)0x00004000) /*!<Trigger DMA request enable */
+
+/******************** Bit definition for TIM_SR register *******************/
+#define TIM_SR_UIF ((uint32_t)0x00000001) /*!<Update interrupt Flag */
+#define TIM_SR_CC1IF ((uint32_t)0x00000002) /*!<Capture/Compare 1 interrupt Flag */
+#define TIM_SR_CC2IF ((uint32_t)0x00000004) /*!<Capture/Compare 2 interrupt Flag */
+#define TIM_SR_CC3IF ((uint32_t)0x00000008) /*!<Capture/Compare 3 interrupt Flag */
+#define TIM_SR_CC4IF ((uint32_t)0x00000010) /*!<Capture/Compare 4 interrupt Flag */
+#define TIM_SR_COMIF ((uint32_t)0x00000020) /*!<COM interrupt Flag */
+#define TIM_SR_TIF ((uint32_t)0x00000040) /*!<Trigger interrupt Flag */
+#define TIM_SR_BIF ((uint32_t)0x00000080) /*!<Break interrupt Flag */
+#define TIM_SR_CC1OF ((uint32_t)0x00000200) /*!<Capture/Compare 1 Overcapture Flag */
+#define TIM_SR_CC2OF ((uint32_t)0x00000400) /*!<Capture/Compare 2 Overcapture Flag */
+#define TIM_SR_CC3OF ((uint32_t)0x00000800) /*!<Capture/Compare 3 Overcapture Flag */
+#define TIM_SR_CC4OF ((uint32_t)0x00001000) /*!<Capture/Compare 4 Overcapture Flag */
+
+/******************* Bit definition for TIM_EGR register *******************/
+#define TIM_EGR_UG ((uint32_t)0x00000001) /*!<Update Generation */
+#define TIM_EGR_CC1G ((uint32_t)0x00000002) /*!<Capture/Compare 1 Generation */
+#define TIM_EGR_CC2G ((uint32_t)0x00000004) /*!<Capture/Compare 2 Generation */
+#define TIM_EGR_CC3G ((uint32_t)0x00000008) /*!<Capture/Compare 3 Generation */
+#define TIM_EGR_CC4G ((uint32_t)0x00000010) /*!<Capture/Compare 4 Generation */
+#define TIM_EGR_COMG ((uint32_t)0x00000020) /*!<Capture/Compare Control Update Generation */
+#define TIM_EGR_TG ((uint32_t)0x00000040) /*!<Trigger Generation */
+#define TIM_EGR_BG ((uint32_t)0x00000080) /*!<Break Generation */
+
+/****************** Bit definition for TIM_CCMR1 register ******************/
+#define TIM_CCMR1_CC1S ((uint32_t)0x00000003) /*!<CC1S[1:0] bits (Capture/Compare 1 Selection) */
+#define TIM_CCMR1_CC1S_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_CCMR1_CC1S_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC1FE ((uint32_t)0x00000004) /*!<Output Compare 1 Fast enable */
+#define TIM_CCMR1_OC1PE ((uint32_t)0x00000008) /*!<Output Compare 1 Preload enable */
+
+#define TIM_CCMR1_OC1M ((uint32_t)0x00000070) /*!<OC1M[2:0] bits (Output Compare 1 Mode) */
+#define TIM_CCMR1_OC1M_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR1_OC1M_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR1_OC1M_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CCMR1_OC1CE ((uint32_t)0x00000080) /*!<Output Compare 1Clear Enable */
+
+#define TIM_CCMR1_CC2S ((uint32_t)0x00000300) /*!<CC2S[1:0] bits (Capture/Compare 2 Selection) */
+#define TIM_CCMR1_CC2S_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CCMR1_CC2S_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC2FE ((uint32_t)0x00000400) /*!<Output Compare 2 Fast enable */
+#define TIM_CCMR1_OC2PE ((uint32_t)0x00000800) /*!<Output Compare 2 Preload enable */
+
+#define TIM_CCMR1_OC2M ((uint32_t)0x00007000) /*!<OC2M[2:0] bits (Output Compare 2 Mode) */
+#define TIM_CCMR1_OC2M_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR1_OC2M_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR1_OC2M_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+
+#define TIM_CCMR1_OC2CE ((uint32_t)0x00008000) /*!<Output Compare 2 Clear Enable */
+
+/*---------------------------------------------------------------------------*/
+
+#define TIM_CCMR1_IC1PSC ((uint32_t)0x0000000C) /*!<IC1PSC[1:0] bits (Input Capture 1 Prescaler) */
+#define TIM_CCMR1_IC1PSC_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define TIM_CCMR1_IC1PSC_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC1F ((uint32_t)0x000000F0) /*!<IC1F[3:0] bits (Input Capture 1 Filter) */
+#define TIM_CCMR1_IC1F_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR1_IC1F_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR1_IC1F_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define TIM_CCMR1_IC1F_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define TIM_CCMR1_IC2PSC ((uint32_t)0x00000C00) /*!<IC2PSC[1:0] bits (Input Capture 2 Prescaler) */
+#define TIM_CCMR1_IC2PSC_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define TIM_CCMR1_IC2PSC_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC2F ((uint32_t)0x0000F000) /*!<IC2F[3:0] bits (Input Capture 2 Filter) */
+#define TIM_CCMR1_IC2F_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR1_IC2F_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR1_IC2F_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define TIM_CCMR1_IC2F_3 ((uint32_t)0x00008000) /*!<Bit 3 */
+
+/****************** Bit definition for TIM_CCMR2 register ******************/
+#define TIM_CCMR2_CC3S ((uint32_t)0x00000003) /*!<CC3S[1:0] bits (Capture/Compare 3 Selection) */
+#define TIM_CCMR2_CC3S_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_CCMR2_CC3S_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC3FE ((uint32_t)0x00000004) /*!<Output Compare 3 Fast enable */
+#define TIM_CCMR2_OC3PE ((uint32_t)0x00000008) /*!<Output Compare 3 Preload enable */
+
+#define TIM_CCMR2_OC3M ((uint32_t)0x00000070) /*!<OC3M[2:0] bits (Output Compare 3 Mode) */
+#define TIM_CCMR2_OC3M_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR2_OC3M_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR2_OC3M_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CCMR2_OC3CE ((uint32_t)0x00000080) /*!<Output Compare 3 Clear Enable */
+
+#define TIM_CCMR2_CC4S ((uint32_t)0x00000300) /*!<CC4S[1:0] bits (Capture/Compare 4 Selection) */
+#define TIM_CCMR2_CC4S_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CCMR2_CC4S_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC4FE ((uint32_t)0x00000400) /*!<Output Compare 4 Fast enable */
+#define TIM_CCMR2_OC4PE ((uint32_t)0x00000800) /*!<Output Compare 4 Preload enable */
+
+#define TIM_CCMR2_OC4M ((uint32_t)0x00007000) /*!<OC4M[2:0] bits (Output Compare 4 Mode) */
+#define TIM_CCMR2_OC4M_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR2_OC4M_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR2_OC4M_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+
+#define TIM_CCMR2_OC4CE ((uint32_t)0x00008000) /*!<Output Compare 4 Clear Enable */
+
+/*---------------------------------------------------------------------------*/
+
+#define TIM_CCMR2_IC3PSC ((uint32_t)0x0000000C) /*!<IC3PSC[1:0] bits (Input Capture 3 Prescaler) */
+#define TIM_CCMR2_IC3PSC_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define TIM_CCMR2_IC3PSC_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC3F ((uint32_t)0x000000F0) /*!<IC3F[3:0] bits (Input Capture 3 Filter) */
+#define TIM_CCMR2_IC3F_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR2_IC3F_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR2_IC3F_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define TIM_CCMR2_IC3F_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define TIM_CCMR2_IC4PSC ((uint32_t)0x00000C00) /*!<IC4PSC[1:0] bits (Input Capture 4 Prescaler) */
+#define TIM_CCMR2_IC4PSC_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define TIM_CCMR2_IC4PSC_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC4F ((uint32_t)0x0000F000) /*!<IC4F[3:0] bits (Input Capture 4 Filter) */
+#define TIM_CCMR2_IC4F_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR2_IC4F_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR2_IC4F_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define TIM_CCMR2_IC4F_3 ((uint32_t)0x00008000) /*!<Bit 3 */
+
+/******************* Bit definition for TIM_CCER register ******************/
+#define TIM_CCER_CC1E ((uint32_t)0x00000001) /*!<Capture/Compare 1 output enable */
+#define TIM_CCER_CC1P ((uint32_t)0x00000002) /*!<Capture/Compare 1 output Polarity */
+#define TIM_CCER_CC1NE ((uint32_t)0x00000004) /*!<Capture/Compare 1 Complementary output enable */
+#define TIM_CCER_CC1NP ((uint32_t)0x00000008) /*!<Capture/Compare 1 Complementary output Polarity */
+#define TIM_CCER_CC2E ((uint32_t)0x00000010) /*!<Capture/Compare 2 output enable */
+#define TIM_CCER_CC2P ((uint32_t)0x00000020) /*!<Capture/Compare 2 output Polarity */
+#define TIM_CCER_CC2NE ((uint32_t)0x00000040) /*!<Capture/Compare 2 Complementary output enable */
+#define TIM_CCER_CC2NP ((uint32_t)0x00000080) /*!<Capture/Compare 2 Complementary output Polarity */
+#define TIM_CCER_CC3E ((uint32_t)0x00000100) /*!<Capture/Compare 3 output enable */
+#define TIM_CCER_CC3P ((uint32_t)0x00000200) /*!<Capture/Compare 3 output Polarity */
+#define TIM_CCER_CC3NE ((uint32_t)0x00000400) /*!<Capture/Compare 3 Complementary output enable */
+#define TIM_CCER_CC3NP ((uint32_t)0x00000800) /*!<Capture/Compare 3 Complementary output Polarity */
+#define TIM_CCER_CC4E ((uint32_t)0x00001000) /*!<Capture/Compare 4 output enable */
+#define TIM_CCER_CC4P ((uint32_t)0x00002000) /*!<Capture/Compare 4 output Polarity */
+#define TIM_CCER_CC4NP ((uint32_t)0x00008000) /*!<Capture/Compare 4 Complementary output Polarity */
+
+/******************* Bit definition for TIM_CNT register *******************/
+#define TIM_CNT_CNT ((uint32_t)0xFFFFFFFF) /*!<Counter Value */
+
+/******************* Bit definition for TIM_PSC register *******************/
+#define TIM_PSC_PSC ((uint32_t)0x0000FFFF) /*!<Prescaler Value */
+
+/******************* Bit definition for TIM_ARR register *******************/
+#define TIM_ARR_ARR ((uint32_t)0xFFFFFFFF) /*!<actual auto-reload Value */
+
+/******************* Bit definition for TIM_RCR register *******************/
+#define TIM_RCR_REP ((uint32_t)0x000000FF) /*!<Repetition Counter Value */
+
+/******************* Bit definition for TIM_CCR1 register ******************/
+#define TIM_CCR1_CCR1 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 1 Value */
+
+/******************* Bit definition for TIM_CCR2 register ******************/
+#define TIM_CCR2_CCR2 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 2 Value */
+
+/******************* Bit definition for TIM_CCR3 register ******************/
+#define TIM_CCR3_CCR3 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 3 Value */
+
+/******************* Bit definition for TIM_CCR4 register ******************/
+#define TIM_CCR4_CCR4 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 4 Value */
+
+/******************* Bit definition for TIM_BDTR register ******************/
+#define TIM_BDTR_DTG ((uint32_t)0x000000FF) /*!<DTG[0:7] bits (Dead-Time Generator set-up) */
+#define TIM_BDTR_DTG_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_BDTR_DTG_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_BDTR_DTG_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define TIM_BDTR_DTG_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define TIM_BDTR_DTG_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define TIM_BDTR_DTG_5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define TIM_BDTR_DTG_6 ((uint32_t)0x00000040) /*!<Bit 6 */
+#define TIM_BDTR_DTG_7 ((uint32_t)0x00000080) /*!<Bit 7 */
+
+#define TIM_BDTR_LOCK ((uint32_t)0x00000300) /*!<LOCK[1:0] bits (Lock Configuration) */
+#define TIM_BDTR_LOCK_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_BDTR_LOCK_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_BDTR_OSSI ((uint32_t)0x00000400) /*!<Off-State Selection for Idle mode */
+#define TIM_BDTR_OSSR ((uint32_t)0x00000800) /*!<Off-State Selection for Run mode */
+#define TIM_BDTR_BKE ((uint32_t)0x00001000) /*!<Break enable */
+#define TIM_BDTR_BKP ((uint32_t)0x00002000) /*!<Break Polarity */
+#define TIM_BDTR_AOE ((uint32_t)0x00004000) /*!<Automatic Output enable */
+#define TIM_BDTR_MOE ((uint32_t)0x00008000) /*!<Main Output enable */
+
+/******************* Bit definition for TIM_DCR register *******************/
+#define TIM_DCR_DBA ((uint32_t)0x0000001F) /*!<DBA[4:0] bits (DMA Base Address) */
+#define TIM_DCR_DBA_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_DCR_DBA_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_DCR_DBA_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define TIM_DCR_DBA_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define TIM_DCR_DBA_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+
+#define TIM_DCR_DBL ((uint32_t)0x00001F00) /*!<DBL[4:0] bits (DMA Burst Length) */
+#define TIM_DCR_DBL_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_DCR_DBL_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define TIM_DCR_DBL_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define TIM_DCR_DBL_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define TIM_DCR_DBL_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+
+/******************* Bit definition for TIM_DMAR register ******************/
+#define TIM_DMAR_DMAB ((uint32_t)0x0000FFFF) /*!<DMA register for burst accesses */
+
+/******************* Bit definition for TIM14_OR register ********************/
+#define TIM14_OR_TI1_RMP ((uint32_t)0x00000003) /*!<TI1_RMP[1:0] bits (TIM14 Input 4 remap) */
+#define TIM14_OR_TI1_RMP_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM14_OR_TI1_RMP_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+/******************************************************************************/
+/* */
+/* Touch Sensing Controller (TSC) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for TSC_CR register *********************/
+#define TSC_CR_TSCE ((uint32_t)0x00000001) /*!<Touch sensing controller enable */
+#define TSC_CR_START ((uint32_t)0x00000002) /*!<Start acquisition */
+#define TSC_CR_AM ((uint32_t)0x00000004) /*!<Acquisition mode */
+#define TSC_CR_SYNCPOL ((uint32_t)0x00000008) /*!<Synchronization pin polarity */
+#define TSC_CR_IODEF ((uint32_t)0x00000010) /*!<IO default mode */
+
+#define TSC_CR_MCV ((uint32_t)0x000000E0) /*!<MCV[2:0] bits (Max Count Value) */
+#define TSC_CR_MCV_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define TSC_CR_MCV_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+#define TSC_CR_MCV_2 ((uint32_t)0x00000080) /*!<Bit 2 */
+
+#define TSC_CR_PGPSC ((uint32_t)0x00007000) /*!<PGPSC[2:0] bits (Pulse Generator Prescaler) */
+#define TSC_CR_PGPSC_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TSC_CR_PGPSC_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TSC_CR_PGPSC_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+
+#define TSC_CR_SSPSC ((uint32_t)0x00008000) /*!<Spread Spectrum Prescaler */
+#define TSC_CR_SSE ((uint32_t)0x00010000) /*!<Spread Spectrum Enable */
+
+#define TSC_CR_SSD ((uint32_t)0x00FE0000) /*!<SSD[6:0] bits (Spread Spectrum Deviation) */
+#define TSC_CR_SSD_0 ((uint32_t)0x00020000) /*!<Bit 0 */
+#define TSC_CR_SSD_1 ((uint32_t)0x00040000) /*!<Bit 1 */
+#define TSC_CR_SSD_2 ((uint32_t)0x00080000) /*!<Bit 2 */
+#define TSC_CR_SSD_3 ((uint32_t)0x00100000) /*!<Bit 3 */
+#define TSC_CR_SSD_4 ((uint32_t)0x00200000) /*!<Bit 4 */
+#define TSC_CR_SSD_5 ((uint32_t)0x00400000) /*!<Bit 5 */
+#define TSC_CR_SSD_6 ((uint32_t)0x00800000) /*!<Bit 6 */
+
+#define TSC_CR_CTPL ((uint32_t)0x0F000000) /*!<CTPL[3:0] bits (Charge Transfer pulse low) */
+#define TSC_CR_CTPL_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define TSC_CR_CTPL_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define TSC_CR_CTPL_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define TSC_CR_CTPL_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+
+#define TSC_CR_CTPH ((uint32_t)0xF0000000) /*!<CTPH[3:0] bits (Charge Transfer pulse high) */
+#define TSC_CR_CTPH_0 ((uint32_t)0x10000000) /*!<Bit 0 */
+#define TSC_CR_CTPH_1 ((uint32_t)0x20000000) /*!<Bit 1 */
+#define TSC_CR_CTPH_2 ((uint32_t)0x40000000) /*!<Bit 2 */
+#define TSC_CR_CTPH_3 ((uint32_t)0x80000000) /*!<Bit 3 */
+
+/******************* Bit definition for TSC_IER register ********************/
+#define TSC_IER_EOAIE ((uint32_t)0x00000001) /*!<End of acquisition interrupt enable */
+#define TSC_IER_MCEIE ((uint32_t)0x00000002) /*!<Max count error interrupt enable */
+
+/******************* Bit definition for TSC_ICR register ********************/
+#define TSC_ICR_EOAIC ((uint32_t)0x00000001) /*!<End of acquisition interrupt clear */
+#define TSC_ICR_MCEIC ((uint32_t)0x00000002) /*!<Max count error interrupt clear */
+
+/******************* Bit definition for TSC_ISR register ********************/
+#define TSC_ISR_EOAF ((uint32_t)0x00000001) /*!<End of acquisition flag */
+#define TSC_ISR_MCEF ((uint32_t)0x00000002) /*!<Max count error flag */
+
+/******************* Bit definition for TSC_IOHCR register ******************/
+#define TSC_IOHCR_G1_IO1 ((uint32_t)0x00000001) /*!<GROUP1_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G1_IO2 ((uint32_t)0x00000002) /*!<GROUP1_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G1_IO3 ((uint32_t)0x00000004) /*!<GROUP1_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G1_IO4 ((uint32_t)0x00000008) /*!<GROUP1_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G2_IO1 ((uint32_t)0x00000010) /*!<GROUP2_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G2_IO2 ((uint32_t)0x00000020) /*!<GROUP2_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G2_IO3 ((uint32_t)0x00000040) /*!<GROUP2_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G2_IO4 ((uint32_t)0x00000080) /*!<GROUP2_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G3_IO1 ((uint32_t)0x00000100) /*!<GROUP3_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G3_IO2 ((uint32_t)0x00000200) /*!<GROUP3_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G3_IO3 ((uint32_t)0x00000400) /*!<GROUP3_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G3_IO4 ((uint32_t)0x00000800) /*!<GROUP3_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G4_IO1 ((uint32_t)0x00001000) /*!<GROUP4_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G4_IO2 ((uint32_t)0x00002000) /*!<GROUP4_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G4_IO3 ((uint32_t)0x00004000) /*!<GROUP4_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G4_IO4 ((uint32_t)0x00008000) /*!<GROUP4_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G5_IO1 ((uint32_t)0x00010000) /*!<GROUP5_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G5_IO2 ((uint32_t)0x00020000) /*!<GROUP5_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G5_IO3 ((uint32_t)0x00040000) /*!<GROUP5_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G5_IO4 ((uint32_t)0x00080000) /*!<GROUP5_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G6_IO1 ((uint32_t)0x00100000) /*!<GROUP6_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G6_IO2 ((uint32_t)0x00200000) /*!<GROUP6_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G6_IO3 ((uint32_t)0x00400000) /*!<GROUP6_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G6_IO4 ((uint32_t)0x00800000) /*!<GROUP6_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G7_IO1 ((uint32_t)0x01000000) /*!<GROUP7_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G7_IO2 ((uint32_t)0x02000000) /*!<GROUP7_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G7_IO3 ((uint32_t)0x04000000) /*!<GROUP7_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G7_IO4 ((uint32_t)0x08000000) /*!<GROUP7_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G8_IO1 ((uint32_t)0x10000000) /*!<GROUP8_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G8_IO2 ((uint32_t)0x20000000) /*!<GROUP8_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G8_IO3 ((uint32_t)0x40000000) /*!<GROUP8_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G8_IO4 ((uint32_t)0x80000000) /*!<GROUP8_IO4 schmitt trigger hysteresis mode */
+
+/******************* Bit definition for TSC_IOASCR register *****************/
+#define TSC_IOASCR_G1_IO1 ((uint32_t)0x00000001) /*!<GROUP1_IO1 analog switch enable */
+#define TSC_IOASCR_G1_IO2 ((uint32_t)0x00000002) /*!<GROUP1_IO2 analog switch enable */
+#define TSC_IOASCR_G1_IO3 ((uint32_t)0x00000004) /*!<GROUP1_IO3 analog switch enable */
+#define TSC_IOASCR_G1_IO4 ((uint32_t)0x00000008) /*!<GROUP1_IO4 analog switch enable */
+#define TSC_IOASCR_G2_IO1 ((uint32_t)0x00000010) /*!<GROUP2_IO1 analog switch enable */
+#define TSC_IOASCR_G2_IO2 ((uint32_t)0x00000020) /*!<GROUP2_IO2 analog switch enable */
+#define TSC_IOASCR_G2_IO3 ((uint32_t)0x00000040) /*!<GROUP2_IO3 analog switch enable */
+#define TSC_IOASCR_G2_IO4 ((uint32_t)0x00000080) /*!<GROUP2_IO4 analog switch enable */
+#define TSC_IOASCR_G3_IO1 ((uint32_t)0x00000100) /*!<GROUP3_IO1 analog switch enable */
+#define TSC_IOASCR_G3_IO2 ((uint32_t)0x00000200) /*!<GROUP3_IO2 analog switch enable */
+#define TSC_IOASCR_G3_IO3 ((uint32_t)0x00000400) /*!<GROUP3_IO3 analog switch enable */
+#define TSC_IOASCR_G3_IO4 ((uint32_t)0x00000800) /*!<GROUP3_IO4 analog switch enable */
+#define TSC_IOASCR_G4_IO1 ((uint32_t)0x00001000) /*!<GROUP4_IO1 analog switch enable */
+#define TSC_IOASCR_G4_IO2 ((uint32_t)0x00002000) /*!<GROUP4_IO2 analog switch enable */
+#define TSC_IOASCR_G4_IO3 ((uint32_t)0x00004000) /*!<GROUP4_IO3 analog switch enable */
+#define TSC_IOASCR_G4_IO4 ((uint32_t)0x00008000) /*!<GROUP4_IO4 analog switch enable */
+#define TSC_IOASCR_G5_IO1 ((uint32_t)0x00010000) /*!<GROUP5_IO1 analog switch enable */
+#define TSC_IOASCR_G5_IO2 ((uint32_t)0x00020000) /*!<GROUP5_IO2 analog switch enable */
+#define TSC_IOASCR_G5_IO3 ((uint32_t)0x00040000) /*!<GROUP5_IO3 analog switch enable */
+#define TSC_IOASCR_G5_IO4 ((uint32_t)0x00080000) /*!<GROUP5_IO4 analog switch enable */
+#define TSC_IOASCR_G6_IO1 ((uint32_t)0x00100000) /*!<GROUP6_IO1 analog switch enable */
+#define TSC_IOASCR_G6_IO2 ((uint32_t)0x00200000) /*!<GROUP6_IO2 analog switch enable */
+#define TSC_IOASCR_G6_IO3 ((uint32_t)0x00400000) /*!<GROUP6_IO3 analog switch enable */
+#define TSC_IOASCR_G6_IO4 ((uint32_t)0x00800000) /*!<GROUP6_IO4 analog switch enable */
+#define TSC_IOASCR_G7_IO1 ((uint32_t)0x01000000) /*!<GROUP7_IO1 analog switch enable */
+#define TSC_IOASCR_G7_IO2 ((uint32_t)0x02000000) /*!<GROUP7_IO2 analog switch enable */
+#define TSC_IOASCR_G7_IO3 ((uint32_t)0x04000000) /*!<GROUP7_IO3 analog switch enable */
+#define TSC_IOASCR_G7_IO4 ((uint32_t)0x08000000) /*!<GROUP7_IO4 analog switch enable */
+#define TSC_IOASCR_G8_IO1 ((uint32_t)0x10000000) /*!<GROUP8_IO1 analog switch enable */
+#define TSC_IOASCR_G8_IO2 ((uint32_t)0x20000000) /*!<GROUP8_IO2 analog switch enable */
+#define TSC_IOASCR_G8_IO3 ((uint32_t)0x40000000) /*!<GROUP8_IO3 analog switch enable */
+#define TSC_IOASCR_G8_IO4 ((uint32_t)0x80000000) /*!<GROUP8_IO4 analog switch enable */
+
+/******************* Bit definition for TSC_IOSCR register ******************/
+#define TSC_IOSCR_G1_IO1 ((uint32_t)0x00000001) /*!<GROUP1_IO1 sampling mode */
+#define TSC_IOSCR_G1_IO2 ((uint32_t)0x00000002) /*!<GROUP1_IO2 sampling mode */
+#define TSC_IOSCR_G1_IO3 ((uint32_t)0x00000004) /*!<GROUP1_IO3 sampling mode */
+#define TSC_IOSCR_G1_IO4 ((uint32_t)0x00000008) /*!<GROUP1_IO4 sampling mode */
+#define TSC_IOSCR_G2_IO1 ((uint32_t)0x00000010) /*!<GROUP2_IO1 sampling mode */
+#define TSC_IOSCR_G2_IO2 ((uint32_t)0x00000020) /*!<GROUP2_IO2 sampling mode */
+#define TSC_IOSCR_G2_IO3 ((uint32_t)0x00000040) /*!<GROUP2_IO3 sampling mode */
+#define TSC_IOSCR_G2_IO4 ((uint32_t)0x00000080) /*!<GROUP2_IO4 sampling mode */
+#define TSC_IOSCR_G3_IO1 ((uint32_t)0x00000100) /*!<GROUP3_IO1 sampling mode */
+#define TSC_IOSCR_G3_IO2 ((uint32_t)0x00000200) /*!<GROUP3_IO2 sampling mode */
+#define TSC_IOSCR_G3_IO3 ((uint32_t)0x00000400) /*!<GROUP3_IO3 sampling mode */
+#define TSC_IOSCR_G3_IO4 ((uint32_t)0x00000800) /*!<GROUP3_IO4 sampling mode */
+#define TSC_IOSCR_G4_IO1 ((uint32_t)0x00001000) /*!<GROUP4_IO1 sampling mode */
+#define TSC_IOSCR_G4_IO2 ((uint32_t)0x00002000) /*!<GROUP4_IO2 sampling mode */
+#define TSC_IOSCR_G4_IO3 ((uint32_t)0x00004000) /*!<GROUP4_IO3 sampling mode */
+#define TSC_IOSCR_G4_IO4 ((uint32_t)0x00008000) /*!<GROUP4_IO4 sampling mode */
+#define TSC_IOSCR_G5_IO1 ((uint32_t)0x00010000) /*!<GROUP5_IO1 sampling mode */
+#define TSC_IOSCR_G5_IO2 ((uint32_t)0x00020000) /*!<GROUP5_IO2 sampling mode */
+#define TSC_IOSCR_G5_IO3 ((uint32_t)0x00040000) /*!<GROUP5_IO3 sampling mode */
+#define TSC_IOSCR_G5_IO4 ((uint32_t)0x00080000) /*!<GROUP5_IO4 sampling mode */
+#define TSC_IOSCR_G6_IO1 ((uint32_t)0x00100000) /*!<GROUP6_IO1 sampling mode */
+#define TSC_IOSCR_G6_IO2 ((uint32_t)0x00200000) /*!<GROUP6_IO2 sampling mode */
+#define TSC_IOSCR_G6_IO3 ((uint32_t)0x00400000) /*!<GROUP6_IO3 sampling mode */
+#define TSC_IOSCR_G6_IO4 ((uint32_t)0x00800000) /*!<GROUP6_IO4 sampling mode */
+#define TSC_IOSCR_G7_IO1 ((uint32_t)0x01000000) /*!<GROUP7_IO1 sampling mode */
+#define TSC_IOSCR_G7_IO2 ((uint32_t)0x02000000) /*!<GROUP7_IO2 sampling mode */
+#define TSC_IOSCR_G7_IO3 ((uint32_t)0x04000000) /*!<GROUP7_IO3 sampling mode */
+#define TSC_IOSCR_G7_IO4 ((uint32_t)0x08000000) /*!<GROUP7_IO4 sampling mode */
+#define TSC_IOSCR_G8_IO1 ((uint32_t)0x10000000) /*!<GROUP8_IO1 sampling mode */
+#define TSC_IOSCR_G8_IO2 ((uint32_t)0x20000000) /*!<GROUP8_IO2 sampling mode */
+#define TSC_IOSCR_G8_IO3 ((uint32_t)0x40000000) /*!<GROUP8_IO3 sampling mode */
+#define TSC_IOSCR_G8_IO4 ((uint32_t)0x80000000) /*!<GROUP8_IO4 sampling mode */
+
+/******************* Bit definition for TSC_IOCCR register ******************/
+#define TSC_IOCCR_G1_IO1 ((uint32_t)0x00000001) /*!<GROUP1_IO1 channel mode */
+#define TSC_IOCCR_G1_IO2 ((uint32_t)0x00000002) /*!<GROUP1_IO2 channel mode */
+#define TSC_IOCCR_G1_IO3 ((uint32_t)0x00000004) /*!<GROUP1_IO3 channel mode */
+#define TSC_IOCCR_G1_IO4 ((uint32_t)0x00000008) /*!<GROUP1_IO4 channel mode */
+#define TSC_IOCCR_G2_IO1 ((uint32_t)0x00000010) /*!<GROUP2_IO1 channel mode */
+#define TSC_IOCCR_G2_IO2 ((uint32_t)0x00000020) /*!<GROUP2_IO2 channel mode */
+#define TSC_IOCCR_G2_IO3 ((uint32_t)0x00000040) /*!<GROUP2_IO3 channel mode */
+#define TSC_IOCCR_G2_IO4 ((uint32_t)0x00000080) /*!<GROUP2_IO4 channel mode */
+#define TSC_IOCCR_G3_IO1 ((uint32_t)0x00000100) /*!<GROUP3_IO1 channel mode */
+#define TSC_IOCCR_G3_IO2 ((uint32_t)0x00000200) /*!<GROUP3_IO2 channel mode */
+#define TSC_IOCCR_G3_IO3 ((uint32_t)0x00000400) /*!<GROUP3_IO3 channel mode */
+#define TSC_IOCCR_G3_IO4 ((uint32_t)0x00000800) /*!<GROUP3_IO4 channel mode */
+#define TSC_IOCCR_G4_IO1 ((uint32_t)0x00001000) /*!<GROUP4_IO1 channel mode */
+#define TSC_IOCCR_G4_IO2 ((uint32_t)0x00002000) /*!<GROUP4_IO2 channel mode */
+#define TSC_IOCCR_G4_IO3 ((uint32_t)0x00004000) /*!<GROUP4_IO3 channel mode */
+#define TSC_IOCCR_G4_IO4 ((uint32_t)0x00008000) /*!<GROUP4_IO4 channel mode */
+#define TSC_IOCCR_G5_IO1 ((uint32_t)0x00010000) /*!<GROUP5_IO1 channel mode */
+#define TSC_IOCCR_G5_IO2 ((uint32_t)0x00020000) /*!<GROUP5_IO2 channel mode */
+#define TSC_IOCCR_G5_IO3 ((uint32_t)0x00040000) /*!<GROUP5_IO3 channel mode */
+#define TSC_IOCCR_G5_IO4 ((uint32_t)0x00080000) /*!<GROUP5_IO4 channel mode */
+#define TSC_IOCCR_G6_IO1 ((uint32_t)0x00100000) /*!<GROUP6_IO1 channel mode */
+#define TSC_IOCCR_G6_IO2 ((uint32_t)0x00200000) /*!<GROUP6_IO2 channel mode */
+#define TSC_IOCCR_G6_IO3 ((uint32_t)0x00400000) /*!<GROUP6_IO3 channel mode */
+#define TSC_IOCCR_G6_IO4 ((uint32_t)0x00800000) /*!<GROUP6_IO4 channel mode */
+#define TSC_IOCCR_G7_IO1 ((uint32_t)0x01000000) /*!<GROUP7_IO1 channel mode */
+#define TSC_IOCCR_G7_IO2 ((uint32_t)0x02000000) /*!<GROUP7_IO2 channel mode */
+#define TSC_IOCCR_G7_IO3 ((uint32_t)0x04000000) /*!<GROUP7_IO3 channel mode */
+#define TSC_IOCCR_G7_IO4 ((uint32_t)0x08000000) /*!<GROUP7_IO4 channel mode */
+#define TSC_IOCCR_G8_IO1 ((uint32_t)0x10000000) /*!<GROUP8_IO1 channel mode */
+#define TSC_IOCCR_G8_IO2 ((uint32_t)0x20000000) /*!<GROUP8_IO2 channel mode */
+#define TSC_IOCCR_G8_IO3 ((uint32_t)0x40000000) /*!<GROUP8_IO3 channel mode */
+#define TSC_IOCCR_G8_IO4 ((uint32_t)0x80000000) /*!<GROUP8_IO4 channel mode */
+
+/******************* Bit definition for TSC_IOGCSR register *****************/
+#define TSC_IOGCSR_G1E ((uint32_t)0x00000001) /*!<Analog IO GROUP1 enable */
+#define TSC_IOGCSR_G2E ((uint32_t)0x00000002) /*!<Analog IO GROUP2 enable */
+#define TSC_IOGCSR_G3E ((uint32_t)0x00000004) /*!<Analog IO GROUP3 enable */
+#define TSC_IOGCSR_G4E ((uint32_t)0x00000008) /*!<Analog IO GROUP4 enable */
+#define TSC_IOGCSR_G5E ((uint32_t)0x00000010) /*!<Analog IO GROUP5 enable */
+#define TSC_IOGCSR_G6E ((uint32_t)0x00000020) /*!<Analog IO GROUP6 enable */
+#define TSC_IOGCSR_G7E ((uint32_t)0x00000040) /*!<Analog IO GROUP7 enable */
+#define TSC_IOGCSR_G8E ((uint32_t)0x00000080) /*!<Analog IO GROUP8 enable */
+#define TSC_IOGCSR_G1S ((uint32_t)0x00010000) /*!<Analog IO GROUP1 status */
+#define TSC_IOGCSR_G2S ((uint32_t)0x00020000) /*!<Analog IO GROUP2 status */
+#define TSC_IOGCSR_G3S ((uint32_t)0x00040000) /*!<Analog IO GROUP3 status */
+#define TSC_IOGCSR_G4S ((uint32_t)0x00080000) /*!<Analog IO GROUP4 status */
+#define TSC_IOGCSR_G5S ((uint32_t)0x00100000) /*!<Analog IO GROUP5 status */
+#define TSC_IOGCSR_G6S ((uint32_t)0x00200000) /*!<Analog IO GROUP6 status */
+#define TSC_IOGCSR_G7S ((uint32_t)0x00400000) /*!<Analog IO GROUP7 status */
+#define TSC_IOGCSR_G8S ((uint32_t)0x00800000) /*!<Analog IO GROUP8 status */
+
+/******************* Bit definition for TSC_IOGXCR register *****************/
+#define TSC_IOGXCR_CNT ((uint32_t)0x00003FFF) /*!<CNT[13:0] bits (Counter value) */
+
+/******************************************************************************/
+/* */
+/* Universal Synchronous Asynchronous Receiver Transmitter (USART) */
+/* */
+/******************************************************************************/
+/****************** Bit definition for USART_CR1 register *******************/
+#define USART_CR1_UE ((uint32_t)0x00000001) /*!< USART Enable */
+#define USART_CR1_UESM ((uint32_t)0x00000002) /*!< USART Enable in STOP Mode */
+#define USART_CR1_RE ((uint32_t)0x00000004) /*!< Receiver Enable */
+#define USART_CR1_TE ((uint32_t)0x00000008) /*!< Transmitter Enable */
+#define USART_CR1_IDLEIE ((uint32_t)0x00000010) /*!< IDLE Interrupt Enable */
+#define USART_CR1_RXNEIE ((uint32_t)0x00000020) /*!< RXNE Interrupt Enable */
+#define USART_CR1_TCIE ((uint32_t)0x00000040) /*!< Transmission Complete Interrupt Enable */
+#define USART_CR1_TXEIE ((uint32_t)0x00000080) /*!< TXE Interrupt Enable */
+#define USART_CR1_PEIE ((uint32_t)0x00000100) /*!< PE Interrupt Enable */
+#define USART_CR1_PS ((uint32_t)0x00000200) /*!< Parity Selection */
+#define USART_CR1_PCE ((uint32_t)0x00000400) /*!< Parity Control Enable */
+#define USART_CR1_WAKE ((uint32_t)0x00000800) /*!< Receiver Wakeup method */
+#define USART_CR1_M0 ((uint32_t)0x00001000) /*!< Word length bit 0 */
+#define USART_CR1_MME ((uint32_t)0x00002000) /*!< Mute Mode Enable */
+#define USART_CR1_CMIE ((uint32_t)0x00004000) /*!< Character match interrupt enable */
+#define USART_CR1_OVER8 ((uint32_t)0x00008000) /*!< Oversampling by 8-bit or 16-bit mode */
+#define USART_CR1_DEDT ((uint32_t)0x001F0000) /*!< DEDT[4:0] bits (Driver Enable Deassertion Time) */
+#define USART_CR1_DEDT_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define USART_CR1_DEDT_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define USART_CR1_DEDT_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define USART_CR1_DEDT_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+#define USART_CR1_DEDT_4 ((uint32_t)0x00100000) /*!< Bit 4 */
+#define USART_CR1_DEAT ((uint32_t)0x03E00000) /*!< DEAT[4:0] bits (Driver Enable Assertion Time) */
+#define USART_CR1_DEAT_0 ((uint32_t)0x00200000) /*!< Bit 0 */
+#define USART_CR1_DEAT_1 ((uint32_t)0x00400000) /*!< Bit 1 */
+#define USART_CR1_DEAT_2 ((uint32_t)0x00800000) /*!< Bit 2 */
+#define USART_CR1_DEAT_3 ((uint32_t)0x01000000) /*!< Bit 3 */
+#define USART_CR1_DEAT_4 ((uint32_t)0x02000000) /*!< Bit 4 */
+#define USART_CR1_RTOIE ((uint32_t)0x04000000) /*!< Receive Time Out interrupt enable */
+#define USART_CR1_EOBIE ((uint32_t)0x08000000) /*!< End of Block interrupt enable */
+#define USART_CR1_M1 ((uint32_t)0x10000000) /*!< Word length bit 1 */
+#define USART_CR1_M ((uint32_t)0x10001000) /*!< [M1:M0] Word length */
+
+/****************** Bit definition for USART_CR2 register *******************/
+#define USART_CR2_ADDM7 ((uint32_t)0x00000010) /*!< 7-bit or 4-bit Address Detection */
+#define USART_CR2_LBDL ((uint32_t)0x00000020) /*!< LIN Break Detection Length */
+#define USART_CR2_LBDIE ((uint32_t)0x00000040) /*!< LIN Break Detection Interrupt Enable */
+#define USART_CR2_LBCL ((uint32_t)0x00000100) /*!< Last Bit Clock pulse */
+#define USART_CR2_CPHA ((uint32_t)0x00000200) /*!< Clock Phase */
+#define USART_CR2_CPOL ((uint32_t)0x00000400) /*!< Clock Polarity */
+#define USART_CR2_CLKEN ((uint32_t)0x00000800) /*!< Clock Enable */
+#define USART_CR2_STOP ((uint32_t)0x00003000) /*!< STOP[1:0] bits (STOP bits) */
+#define USART_CR2_STOP_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define USART_CR2_STOP_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+#define USART_CR2_LINEN ((uint32_t)0x00004000) /*!< LIN mode enable */
+#define USART_CR2_SWAP ((uint32_t)0x00008000) /*!< SWAP TX/RX pins */
+#define USART_CR2_RXINV ((uint32_t)0x00010000) /*!< RX pin active level inversion */
+#define USART_CR2_TXINV ((uint32_t)0x00020000) /*!< TX pin active level inversion */
+#define USART_CR2_DATAINV ((uint32_t)0x00040000) /*!< Binary data inversion */
+#define USART_CR2_MSBFIRST ((uint32_t)0x00080000) /*!< Most Significant Bit First */
+#define USART_CR2_ABREN ((uint32_t)0x00100000) /*!< Auto Baud-Rate Enable*/
+#define USART_CR2_ABRMODE ((uint32_t)0x00600000) /*!< ABRMOD[1:0] bits (Auto Baud-Rate Mode) */
+#define USART_CR2_ABRMODE_0 ((uint32_t)0x00200000) /*!< Bit 0 */
+#define USART_CR2_ABRMODE_1 ((uint32_t)0x00400000) /*!< Bit 1 */
+#define USART_CR2_RTOEN ((uint32_t)0x00800000) /*!< Receiver Time-Out enable */
+#define USART_CR2_ADD ((uint32_t)0xFF000000) /*!< Address of the USART node */
+
+/****************** Bit definition for USART_CR3 register *******************/
+#define USART_CR3_EIE ((uint32_t)0x00000001) /*!< Error Interrupt Enable */
+#define USART_CR3_IREN ((uint32_t)0x00000002) /*!< IrDA mode Enable */
+#define USART_CR3_IRLP ((uint32_t)0x00000004) /*!< IrDA Low-Power */
+#define USART_CR3_HDSEL ((uint32_t)0x00000008) /*!< Half-Duplex Selection */
+#define USART_CR3_NACK ((uint32_t)0x00000010) /*!< SmartCard NACK enable */
+#define USART_CR3_SCEN ((uint32_t)0x00000020) /*!< SmartCard mode enable */
+#define USART_CR3_DMAR ((uint32_t)0x00000040) /*!< DMA Enable Receiver */
+#define USART_CR3_DMAT ((uint32_t)0x00000080) /*!< DMA Enable Transmitter */
+#define USART_CR3_RTSE ((uint32_t)0x00000100) /*!< RTS Enable */
+#define USART_CR3_CTSE ((uint32_t)0x00000200) /*!< CTS Enable */
+#define USART_CR3_CTSIE ((uint32_t)0x00000400) /*!< CTS Interrupt Enable */
+#define USART_CR3_ONEBIT ((uint32_t)0x00000800) /*!< One sample bit method enable */
+#define USART_CR3_OVRDIS ((uint32_t)0x00001000) /*!< Overrun Disable */
+#define USART_CR3_DDRE ((uint32_t)0x00002000) /*!< DMA Disable on Reception Error */
+#define USART_CR3_DEM ((uint32_t)0x00004000) /*!< Driver Enable Mode */
+#define USART_CR3_DEP ((uint32_t)0x00008000) /*!< Driver Enable Polarity Selection */
+#define USART_CR3_SCARCNT ((uint32_t)0x000E0000) /*!< SCARCNT[2:0] bits (SmartCard Auto-Retry Count) */
+#define USART_CR3_SCARCNT_0 ((uint32_t)0x00020000) /*!< Bit 0 */
+#define USART_CR3_SCARCNT_1 ((uint32_t)0x00040000) /*!< Bit 1 */
+#define USART_CR3_SCARCNT_2 ((uint32_t)0x00080000) /*!< Bit 2 */
+#define USART_CR3_WUS ((uint32_t)0x00300000) /*!< WUS[1:0] bits (Wake UP Interrupt Flag Selection) */
+#define USART_CR3_WUS_0 ((uint32_t)0x00100000) /*!< Bit 0 */
+#define USART_CR3_WUS_1 ((uint32_t)0x00200000) /*!< Bit 1 */
+#define USART_CR3_WUFIE ((uint32_t)0x00400000) /*!< Wake Up Interrupt Enable */
+
+/****************** Bit definition for USART_BRR register *******************/
+#define USART_BRR_DIV_FRACTION ((uint32_t)0x0000000F) /*!< Fraction of USARTDIV */
+#define USART_BRR_DIV_MANTISSA ((uint32_t)0x0000FFF0) /*!< Mantissa of USARTDIV */
+
+/****************** Bit definition for USART_GTPR register ******************/
+#define USART_GTPR_PSC ((uint32_t)0x000000FF) /*!< PSC[7:0] bits (Prescaler value) */
+#define USART_GTPR_GT ((uint32_t)0x0000FF00) /*!< GT[7:0] bits (Guard time value) */
+
+
+/******************* Bit definition for USART_RTOR register *****************/
+#define USART_RTOR_RTO ((uint32_t)0x00FFFFFF) /*!< Receiver Time Out Value */
+#define USART_RTOR_BLEN ((uint32_t)0xFF000000) /*!< Block Length */
+
+/******************* Bit definition for USART_RQR register ******************/
+#define USART_RQR_ABRRQ ((uint32_t)0x00000001) /*!< Auto-Baud Rate Request */
+#define USART_RQR_SBKRQ ((uint32_t)0x00000002) /*!< Send Break Request */
+#define USART_RQR_MMRQ ((uint32_t)0x00000004) /*!< Mute Mode Request */
+#define USART_RQR_RXFRQ ((uint32_t)0x00000008) /*!< Receive Data flush Request */
+#define USART_RQR_TXFRQ ((uint32_t)0x00000010) /*!< Transmit data flush Request */
+
+/******************* Bit definition for USART_ISR register ******************/
+#define USART_ISR_PE ((uint32_t)0x00000001) /*!< Parity Error */
+#define USART_ISR_FE ((uint32_t)0x00000002) /*!< Framing Error */
+#define USART_ISR_NE ((uint32_t)0x00000004) /*!< Noise detected Flag */
+#define USART_ISR_ORE ((uint32_t)0x00000008) /*!< OverRun Error */
+#define USART_ISR_IDLE ((uint32_t)0x00000010) /*!< IDLE line detected */
+#define USART_ISR_RXNE ((uint32_t)0x00000020) /*!< Read Data Register Not Empty */
+#define USART_ISR_TC ((uint32_t)0x00000040) /*!< Transmission Complete */
+#define USART_ISR_TXE ((uint32_t)0x00000080) /*!< Transmit Data Register Empty */
+#define USART_ISR_LBDF ((uint32_t)0x00000100) /*!< LIN Break Detection Flag */
+#define USART_ISR_CTSIF ((uint32_t)0x00000200) /*!< CTS interrupt flag */
+#define USART_ISR_CTS ((uint32_t)0x00000400) /*!< CTS flag */
+#define USART_ISR_RTOF ((uint32_t)0x00000800) /*!< Receiver Time Out */
+#define USART_ISR_EOBF ((uint32_t)0x00001000) /*!< End Of Block Flag */
+#define USART_ISR_ABRE ((uint32_t)0x00004000) /*!< Auto-Baud Rate Error */
+#define USART_ISR_ABRF ((uint32_t)0x00008000) /*!< Auto-Baud Rate Flag */
+#define USART_ISR_BUSY ((uint32_t)0x00010000) /*!< Busy Flag */
+#define USART_ISR_CMF ((uint32_t)0x00020000) /*!< Character Match Flag */
+#define USART_ISR_SBKF ((uint32_t)0x00040000) /*!< Send Break Flag */
+#define USART_ISR_RWU ((uint32_t)0x00080000) /*!< Receive Wake Up from mute mode Flag */
+#define USART_ISR_WUF ((uint32_t)0x00100000) /*!< Wake Up from stop mode Flag */
+#define USART_ISR_TEACK ((uint32_t)0x00200000) /*!< Transmit Enable Acknowledge Flag */
+#define USART_ISR_REACK ((uint32_t)0x00400000) /*!< Receive Enable Acknowledge Flag */
+
+/******************* Bit definition for USART_ICR register ******************/
+#define USART_ICR_PECF ((uint32_t)0x00000001) /*!< Parity Error Clear Flag */
+#define USART_ICR_FECF ((uint32_t)0x00000002) /*!< Framing Error Clear Flag */
+#define USART_ICR_NCF ((uint32_t)0x00000004) /*!< Noise detected Clear Flag */
+#define USART_ICR_ORECF ((uint32_t)0x00000008) /*!< OverRun Error Clear Flag */
+#define USART_ICR_IDLECF ((uint32_t)0x00000010) /*!< IDLE line detected Clear Flag */
+#define USART_ICR_TCCF ((uint32_t)0x00000040) /*!< Transmission Complete Clear Flag */
+#define USART_ICR_LBDCF ((uint32_t)0x00000100) /*!< LIN Break Detection Clear Flag */
+#define USART_ICR_CTSCF ((uint32_t)0x00000200) /*!< CTS Interrupt Clear Flag */
+#define USART_ICR_RTOCF ((uint32_t)0x00000800) /*!< Receiver Time Out Clear Flag */
+#define USART_ICR_EOBCF ((uint32_t)0x00001000) /*!< End Of Block Clear Flag */
+#define USART_ICR_CMCF ((uint32_t)0x00020000) /*!< Character Match Clear Flag */
+#define USART_ICR_WUCF ((uint32_t)0x00100000) /*!< Wake Up from stop mode Clear Flag */
+
+/******************* Bit definition for USART_RDR register ******************/
+#define USART_RDR_RDR ((uint16_t)0x01FF) /*!< RDR[8:0] bits (Receive Data value) */
+
+/******************* Bit definition for USART_TDR register ******************/
+#define USART_TDR_TDR ((uint16_t)0x01FF) /*!< TDR[8:0] bits (Transmit Data value) */
+
+/******************************************************************************/
+/* */
+/* Window WATCHDOG (WWDG) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for WWDG_CR register ********************/
+#define WWDG_CR_T ((uint32_t)0x7F) /*!<T[6:0] bits (7-Bit counter (MSB to LSB)) */
+#define WWDG_CR_T0 ((uint32_t)0x01) /*!<Bit 0 */
+#define WWDG_CR_T1 ((uint32_t)0x02) /*!<Bit 1 */
+#define WWDG_CR_T2 ((uint32_t)0x04) /*!<Bit 2 */
+#define WWDG_CR_T3 ((uint32_t)0x08) /*!<Bit 3 */
+#define WWDG_CR_T4 ((uint32_t)0x10) /*!<Bit 4 */
+#define WWDG_CR_T5 ((uint32_t)0x20) /*!<Bit 5 */
+#define WWDG_CR_T6 ((uint32_t)0x40) /*!<Bit 6 */
+
+#define WWDG_CR_WDGA ((uint32_t)0x80) /*!<Activation bit */
+
+/******************* Bit definition for WWDG_CFR register *******************/
+#define WWDG_CFR_W ((uint32_t)0x007F) /*!<W[6:0] bits (7-bit window value) */
+#define WWDG_CFR_W0 ((uint32_t)0x0001) /*!<Bit 0 */
+#define WWDG_CFR_W1 ((uint32_t)0x0002) /*!<Bit 1 */
+#define WWDG_CFR_W2 ((uint32_t)0x0004) /*!<Bit 2 */
+#define WWDG_CFR_W3 ((uint32_t)0x0008) /*!<Bit 3 */
+#define WWDG_CFR_W4 ((uint32_t)0x0010) /*!<Bit 4 */
+#define WWDG_CFR_W5 ((uint32_t)0x0020) /*!<Bit 5 */
+#define WWDG_CFR_W6 ((uint32_t)0x0040) /*!<Bit 6 */
+
+#define WWDG_CFR_WDGTB ((uint32_t)0x0180) /*!<WDGTB[1:0] bits (Timer Base) */
+#define WWDG_CFR_WDGTB0 ((uint32_t)0x0080) /*!<Bit 0 */
+#define WWDG_CFR_WDGTB1 ((uint32_t)0x0100) /*!<Bit 1 */
+
+#define WWDG_CFR_EWI ((uint32_t)0x0200) /*!<Early Wakeup Interrupt */
+
+/******************* Bit definition for WWDG_SR register ********************/
+#define WWDG_SR_EWIF ((uint32_t)0x01) /*!<Early Wakeup Interrupt Flag */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+
+/** @addtogroup Exported_macro
+ * @{
+ */
+
+/****************************** ADC Instances *********************************/
+#define IS_ADC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == ADC1)
+
+#define IS_ADC_COMMON_INSTANCE(INSTANCE) ((INSTANCE) == ADC)
+
+/******************************* CAN Instances ********************************/
+#define IS_CAN_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CAN)
+
+/****************************** COMP Instances *********************************/
+#define IS_COMP_ALL_INSTANCE(INSTANCE) (((INSTANCE) == COMP1) || \
+ ((INSTANCE) == COMP2))
+
+#define IS_COMP_DAC1SWITCH_INSTANCE(INSTANCE) ((INSTANCE) == COMP1)
+
+#define IS_COMP_WINDOWMODE_INSTANCE(INSTANCE) ((INSTANCE) == COMP2)
+
+/****************************** CEC Instances *********************************/
+#define IS_CEC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CEC)
+
+/****************************** CRC Instances *********************************/
+#define IS_CRC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CRC)
+
+/******************************* DAC Instances ********************************/
+#define IS_DAC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == DAC)
+
+/******************************* DMA Instances ******************************/
+#define IS_DMA_ALL_INSTANCE(INSTANCE) (((INSTANCE) == DMA1_Channel1) || \
+ ((INSTANCE) == DMA1_Channel2) || \
+ ((INSTANCE) == DMA1_Channel3) || \
+ ((INSTANCE) == DMA1_Channel4) || \
+ ((INSTANCE) == DMA1_Channel5) || \
+ ((INSTANCE) == DMA1_Channel6) || \
+ ((INSTANCE) == DMA1_Channel7) || \
+ ((INSTANCE) == DMA2_Channel1) || \
+ ((INSTANCE) == DMA2_Channel2) || \
+ ((INSTANCE) == DMA2_Channel3) || \
+ ((INSTANCE) == DMA2_Channel4) || \
+ ((INSTANCE) == DMA2_Channel5))
+
+/****************************** GPIO Instances ********************************/
+#define IS_GPIO_ALL_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB) || \
+ ((INSTANCE) == GPIOC) || \
+ ((INSTANCE) == GPIOD) || \
+ ((INSTANCE) == GPIOE) || \
+ ((INSTANCE) == GPIOF))
+
+#define IS_GPIO_AF_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB) || \
+ ((INSTANCE) == GPIOC) || \
+ ((INSTANCE) == GPIOD) || \
+ ((INSTANCE) == GPIOE) || \
+ ((INSTANCE) == GPIOF))
+
+#define IS_GPIO_LOCK_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB))
+
+/****************************** I2C Instances *********************************/
+#define IS_I2C_ALL_INSTANCE(INSTANCE) (((INSTANCE) == I2C1) || \
+ ((INSTANCE) == I2C2))
+
+/****************************** I2S Instances *********************************/
+#define IS_I2S_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
+ ((INSTANCE) == SPI2))
+
+/****************************** IWDG Instances ********************************/
+#define IS_IWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == IWDG)
+
+/****************************** RTC Instances *********************************/
+#define IS_RTC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == RTC)
+
+/****************************** SMBUS Instances *********************************/
+#define IS_SMBUS_ALL_INSTANCE(INSTANCE) ((INSTANCE) == I2C1)
+
+/****************************** SPI Instances *********************************/
+#define IS_SPI_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
+ ((INSTANCE) == SPI2))
+
+/****************************** TIM Instances *********************************/
+#define IS_TIM_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM6) || \
+ ((INSTANCE) == TIM7) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CC1_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CC2_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_CC3_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CC4_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_TIX_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_ENCODER_INTERFACE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_HALL_INTERFACE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1))
+
+#define IS_TIM_XOR_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_MASTER_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM6) || \
+ ((INSTANCE) == TIM7) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_SLAVE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_32B_COUNTER_INSTANCE(INSTANCE)\
+ ((INSTANCE) == TIM2)
+
+#define IS_TIM_DMABURST_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_BREAK_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CCX_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM2) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM3) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM14) && \
+ (((CHANNEL) == TIM_CHANNEL_1))) \
+ || \
+ (((INSTANCE) == TIM15) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))) \
+ || \
+ (((INSTANCE) == TIM16) && \
+ (((CHANNEL) == TIM_CHANNEL_1))) \
+ || \
+ (((INSTANCE) == TIM17) && \
+ (((CHANNEL) == TIM_CHANNEL_1))))
+
+#define IS_TIM_CCXN_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3))) \
+ || \
+ (((INSTANCE) == TIM15) && \
+ ((CHANNEL) == TIM_CHANNEL_1)) \
+ || \
+ (((INSTANCE) == TIM16) && \
+ ((CHANNEL) == TIM_CHANNEL_1)) \
+ || \
+ (((INSTANCE) == TIM17) && \
+ ((CHANNEL) == TIM_CHANNEL_1)))
+
+#define IS_TIM_COUNTER_MODE_SELECT_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_REPETITION_COUNTER_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CLOCK_DIVISION_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_DMA_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM6) || \
+ ((INSTANCE) == TIM7) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_DMA_CC_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_COMMUTATION_EVENT_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_REMAP_INSTANCE(INSTANCE)\
+ ((INSTANCE) == TIM14)
+
+/****************************** TSC Instances *********************************/
+#define IS_TSC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == TSC)
+
+/*********************** UART Instances : IRDA mode ***************************/
+#define IS_IRDA_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3))
+
+/********************* UART Instances : Smard card mode ***********************/
+#define IS_SMARTCARD_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3))
+
+/******************** USART Instances : Synchronous mode **********************/
+#define IS_USART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3) || \
+ ((INSTANCE) == USART4) || \
+ ((INSTANCE) == USART5) || \
+ ((INSTANCE) == USART6) || \
+ ((INSTANCE) == USART7) || \
+ ((INSTANCE) == USART8))
+
+/******************** USART Instances : auto Baud rate detection **************/
+#define IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3))
+
+/******************** UART Instances : Asynchronous mode **********************/
+#define IS_UART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3) || \
+ ((INSTANCE) == USART4) || \
+ ((INSTANCE) == USART5) || \
+ ((INSTANCE) == USART6) || \
+ ((INSTANCE) == USART7) || \
+ ((INSTANCE) == USART8))
+
+/******************** UART Instances : Half-Duplex mode **********************/
+#define IS_UART_HALFDUPLEX_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3) || \
+ ((INSTANCE) == USART4) || \
+ ((INSTANCE) == USART5) || \
+ ((INSTANCE) == USART6) || \
+ ((INSTANCE) == USART7) || \
+ ((INSTANCE) == USART8))
+
+/****************** UART Instances : Hardware Flow control ********************/
+#define IS_UART_HWFLOW_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3) || \
+ ((INSTANCE) == USART4) || \
+ ((INSTANCE) == USART5) || \
+ ((INSTANCE) == USART6) || \
+ ((INSTANCE) == USART7) || \
+ ((INSTANCE) == USART8))
+
+/****************** UART Instances : LIN mode ********************/
+#define IS_UART_LIN_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3))
+
+/****************** UART Instances : wakeup from stop mode ********************/
+#define IS_UART_WAKEUP_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3))
+
+/****************** UART Instances : Auto Baud Rate detection ********************/
+#define IS_UART_AUTOBAUDRATE_DETECTION_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3))
+
+/****************** UART Instances : Driver enable detection ********************/
+#define IS_UART_DRIVER_ENABLE_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3) || \
+ ((INSTANCE) == USART4) || \
+ ((INSTANCE) == USART5) || \
+ ((INSTANCE) == USART6) || \
+ ((INSTANCE) == USART7) || \
+ ((INSTANCE) == USART8))
+
+/****************************** WWDG Instances ********************************/
+#define IS_WWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == WWDG)
+
+/**
+ * @}
+ */
+
+/******************************************************************************/
+/* For a painless codes migration between the STM32F3xx device product */
+/* lines, the aliases defined below are put in place to overcome the */
+/* differences in the interrupt handlers and IRQn definitions. */
+/* No need to update developed interrupt code when moving across */
+/* product lines within the same STM32L0 Family */
+/******************************************************************************/
+
+/* Aliases for __IRQn */
+#define PVD_VDDIO2_IRQn VDDIO2_IRQn
+#define RCC_IRQn RCC_CRS_IRQn
+#define DMA1_Channel1_IRQn DMA1_Ch1_IRQn
+#define DMA1_Channel2_3_IRQn DMA1_Ch2_3_DMA2_Ch1_2_IRQn
+#define DMA1_Channel4_5_IRQn DMA1_Ch4_7_DMA2_Ch3_5_IRQn
+#define DMA1_Channel4_5_6_7_IRQn DMA1_Ch4_7_DMA2_Ch3_5_IRQn
+#define ADC1_IRQn ADC1_COMP_IRQn
+#define TIM6_IRQn TIM6_DAC_IRQn
+#define USART3_4_IRQn USART3_8_IRQn
+
+/* Aliases for __IRQHandler */
+#define PVD_VDDIO2_IRQHandler VDDIO2_IRQHandler
+#define RCC_IRQHandler RCC_CRS_IRQHandler
+#define DMA1_Channel1_IRQHandler DMA1_Ch1_IRQHandler
+#define DMA1_Channel2_3_IRQHandler DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
+#define DMA1_Channel4_5_IRQHandler DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
+#define DMA1_Channel4_5_6_7_IRQHandler DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
+#define ADC1_IRQHandler ADC1_COMP_IRQHandler
+#define TIM6_IRQHandler TIM6_DAC_IRQHandler
+#define USART3_4_IRQHandler USART3_8_IRQHandler
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F098xx_H */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/include/devices/stm32f0xx.h b/f0/include/devices/stm32f0xx.h
new file mode 100755
index 0000000000000000000000000000000000000000..c5300f28d914cfa6846bda9a6bf3edad01c68f06
--- /dev/null
+++ b/f0/include/devices/stm32f0xx.h
@@ -0,0 +1,237 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx.h
+ * @author MCD Application Team
+ * @version V2.2.1
+ * @date 09-January-2015
+ * @brief CMSIS STM32F0xx Device Peripheral Access Layer Header File.
+ *
+ * The file is the unique include file that the application programmer
+ * is using in the C source code, usually in main.c. This file contains:
+ * - Configuration section that allows to select:
+ * - The STM32F0xx device used in the target application
+ * - To use or not the peripheral’s drivers in application code(i.e.
+ * code will be based on direct access to peripheral’s registers
+ * rather than drivers API), this option is controlled by
+ * "#define USE_HAL_DRIVER"
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f0xx
+ * @{
+ */
+
+#ifndef __STM32F0xx_H
+#define __STM32F0xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Library_configuration_section
+ * @{
+ */
+
+/* Uncomment the line below according to the target STM32 device used in your
+ application
+ */
+
+#if !defined (STM32F030x6) && !defined (STM32F030x8) && \
+ !defined (STM32F031x6) && !defined (STM32F038xx) && \
+ !defined (STM32F042x6) && !defined (STM32F048xx) && !defined (STM32F070x6) && \
+ !defined (STM32F051x8) && !defined (STM32F058xx) && \
+ !defined (STM32F071xB) && !defined (STM32F072xB) && !defined (STM32F078xx) && !defined (STM32F070xB) && \
+ !defined (STM32F091xC) && !defined (STM32F098xx) && !defined (STM32F030xC)
+ /* #define STM32F030x6 */ /*!< STM32F030x4, STM32F030x6 Devices (STM32F030xx microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */
+ /* #define STM32F030x8 */ /*!< STM32F030x8 Devices (STM32F030xx microcontrollers where the Flash memory is 64 Kbytes) */
+ /* #define STM32F031x6 */ /*!< STM32F031x4, STM32F031x6 Devices (STM32F031xx microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */
+ /* #define STM32F038xx */ /*!< STM32F038xx Devices (STM32F038xx microcontrollers where the Flash memory is 32 Kbytes) */
+ /* #define STM32F042x6 */ /*!< STM32F042x4, STM32F042x6 Devices (STM32F042xx microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */
+ /* #define STM32F048x6 */ /*!< STM32F048xx Devices (STM32F042xx microcontrollers where the Flash memory is 32 Kbytes) */
+ /* #define STM32F051x8 */ /*!< STM32F051x4, STM32F051x6, STM32F051x8 Devices (STM32F051xx microcontrollers where the Flash memory ranges between 16 and 64 Kbytes) */
+ /* #define STM32F058xx */ /*!< STM32F058xx Devices (STM32F058xx microcontrollers where the Flash memory is 64 Kbytes) */
+ /* #define STM32F070x6 */ /*!< STM32F070x6 Devices (STM32F070x6 microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */
+ /* #define STM32F070xB */ /*!< STM32F070xB Devices (STM32F070xB microcontrollers where the Flash memory ranges between 64 and 128 Kbytes) */
+ /* #define STM32F071xB */ /*!< STM32F071x8, STM32F071xB Devices (STM32F071xx microcontrollers where the Flash memory ranges between 64 and 128 Kbytes) */
+ /* #define STM32F072xB */ /*!< STM32F072x8, STM32F072xB Devices (STM32F072xx microcontrollers where the Flash memory ranges between 64 and 128 Kbytes) */
+ /* #define STM32F078xx */ /*!< STM32F078xx Devices (STM32F078xx microcontrollers where the Flash memory is 128 Kbytes) */
+ /* #define STM32F030xC */ /*!< STM32F030xC Devices (STM32F030xC microcontrollers where the Flash memory is 256 Kbytes) */
+ /* #define STM32F091xC */ /*!< STM32F091xC Devices (STM32F091xx microcontrollers where the Flash memory is 256 Kbytes) */
+ /* #define STM32F098xx */ /*!< STM32F098xx Devices (STM32F098xx microcontrollers where the Flash memory is 256 Kbytes) */
+#endif
+
+/* Tip: To avoid modifying this file each time you need to switch between these
+ devices, you can define the device in your toolchain compiler preprocessor.
+ */
+#if !defined (USE_HAL_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+ In this case, these drivers will not be included and the application code will
+ be based on direct access to peripherals registers
+ */
+ /*#define USE_HAL_DRIVER */
+#endif /* USE_HAL_DRIVER */
+
+/**
+ * @brief CMSIS Device version number V2.2.1
+ */
+#define __STM32F0xx_CMSIS_DEVICE_VERSION_MAIN (0x02) /*!< [31:24] main version */
+#define __STM32F0xx_CMSIS_DEVICE_VERSION_SUB1 (0x02) /*!< [23:16] sub1 version */
+#define __STM32F0xx_CMSIS_DEVICE_VERSION_SUB2 (0x01) /*!< [15:8] sub2 version */
+#define __STM32F0xx_CMSIS_DEVICE_VERSION_RC (0x00) /*!< [7:0] release candidate */
+#define __STM32F0xx_CMSIS_DEVICE_VERSION ((__CMSIS_DEVICE_VERSION_MAIN << 24)\
+ |(__CMSIS_DEVICE_HAL_VERSION_SUB1 << 16)\
+ |(__CMSIS_DEVICE_HAL_VERSION_SUB2 << 8 )\
+ |(__CMSIS_DEVICE_HAL_VERSION_RC))
+
+/**
+ * @}
+ */
+
+/** @addtogroup Device_Included
+ * @{
+ */
+
+#if defined(STM32F030x6)
+ #include "stm32f030x6.h"
+#elif defined(STM32F030x8)
+ #include "stm32f030x8.h"
+#elif defined(STM32F031x6)
+ #include "stm32f031x6.h"
+#elif defined(STM32F038xx)
+ #include "stm32f038xx.h"
+#elif defined(STM32F042x6)
+ #include "stm32f042x6.h"
+#elif defined(STM32F048xx)
+ #include "stm32f048xx.h"
+#elif defined(STM32F051x8)
+ #include "stm32f051x8.h"
+#elif defined(STM32F058xx)
+ #include "stm32f058xx.h"
+#elif defined(STM32F070x6)
+ #include "stm32f070x6.h"
+#elif defined(STM32F070xB)
+ #include "stm32f070xb.h"
+#elif defined(STM32F071xB)
+ #include "stm32f071xb.h"
+#elif defined(STM32F072xB)
+ #include "stm32f072xb.h"
+#elif defined(STM32F078xx)
+ #include "stm32f078xx.h"
+#elif defined(STM32F091xC)
+ #include "stm32f091xc.h"
+#elif defined(STM32F098xx)
+ #include "stm32f098xx.h"
+#elif defined(STM32F030xC)
+ #include "stm32f030xc.h"
+#else
+ #error "Please select first the target STM32F0xx device used in your application (in stm32f0xx.h file)"
+#endif
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_types
+ * @{
+ */
+typedef enum
+{
+ RESET = 0,
+ SET = !RESET
+} FlagStatus, ITStatus;
+
+typedef enum
+{
+ DISABLE = 0,
+ ENABLE = !DISABLE
+} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum
+{
+ ERROR = 0,
+ SUCCESS = !ERROR
+} ErrorStatus;
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup Exported_macros
+ * @{
+ */
+#define SET_BIT(REG, BIT) ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT) ((REG) & (BIT))
+
+#define CLEAR_REG(REG) ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL) ((REG) = (VAL))
+
+#define READ_REG(REG) ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+
+/**
+ * @}
+ */
+
+#if defined (USE_HAL_DRIVER)
+ #include "stm32f0xx_hal.h"
+#endif /* USE_HAL_DRIVER */
+
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F0xx_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/include/devices/system_stm32f0xx.h b/f0/include/devices/system_stm32f0xx.h
new file mode 100755
index 0000000000000000000000000000000000000000..a40b1bf1580a9b1e28757dd17540d79ee778ebf8
--- /dev/null
+++ b/f0/include/devices/system_stm32f0xx.h
@@ -0,0 +1,121 @@
+/**
+ ******************************************************************************
+ * @file system_stm32f0xx.h
+ * @author MCD Application Team
+ * @version V2.2.1
+ * @date 09-January-2015
+ * @brief CMSIS Cortex-M0 Device System Source File for STM32F0xx devices.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f0xx_system
+ * @{
+ */
+
+/**
+ * @brief Define to prevent recursive inclusion
+ */
+#ifndef __SYSTEM_STM32F0XX_H
+#define __SYSTEM_STM32F0XX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** @addtogroup STM32F0xx_System_Includes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup STM32F0xx_System_Exported_types
+ * @{
+ */
+ /* This variable is updated in three ways:
+ 1) by calling CMSIS function SystemCoreClockUpdate()
+ 3) by calling HAL API function HAL_RCC_GetHCLKFreq()
+ 3) by calling HAL API function HAL_RCC_ClockConfig()
+ Note: If you use this function to configure the system clock; then there
+ is no need to call the 2 first functions listed above, since SystemCoreClock
+ variable is updated automatically.
+ */
+extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F0xx_System_Exported_Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F0xx_System_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F0xx_System_Exported_Functions
+ * @{
+ */
+
+extern void SystemInit(void);
+extern void SystemCoreClockUpdate(void);
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SYSTEM_STM32F0XX_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/include/stm32f0xx_hal.h b/f0/include/stm32f0xx_hal.h
new file mode 100755
index 0000000000000000000000000000000000000000..238c1d0f2eb7e8e3bf23aaf3fbd178bfc7db0b3b
--- /dev/null
+++ b/f0/include/stm32f0xx_hal.h
@@ -0,0 +1,711 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal.h
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief This file contains all the functions prototypes for the HAL
+ * module driver.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_H
+#define __STM32F0xx_HAL_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_conf.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup HAL
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup HAL_Exported_Constants HAL Exported Constants
+ * @{
+ */
+
+#if defined(SYSCFG_CFGR1_DMA_RMP)
+/** @defgroup HAL_DMA_remapping HAL DMA remapping
+ * Elements values convention: 0xYYYYYYYY
+ * - YYYYYYYY : Position in the SYSCFG register CFGR1
+ * @{
+ */
+#define HAL_REMAPDMA_ADC_DMA_CH2 ((uint32_t)SYSCFG_CFGR1_ADC_DMA_RMP) /*!< ADC DMA remap
+ 0: No remap (ADC DMA requests mapped on DMA channel 1
+ 1: Remap (ADC DMA requests mapped on DMA channel 2 */
+#define HAL_REMAPDMA_USART1_TX_DMA_CH4 ((uint32_t)SYSCFG_CFGR1_USART1TX_DMA_RMP) /*!< USART1 TX DMA remap
+ 0: No remap (USART1_TX DMA request mapped on DMA channel 2
+ 1: Remap (USART1_TX DMA request mapped on DMA channel 4 */
+#define HAL_REMAPDMA_USART1_RX_DMA_CH5 ((uint32_t)SYSCFG_CFGR1_USART1RX_DMA_RMP) /*!< USART1 RX DMA remap
+ 0: No remap (USART1_RX DMA request mapped on DMA channel 3
+ 1: Remap (USART1_RX DMA request mapped on DMA channel 5 */
+#define HAL_REMAPDMA_TIM16_DMA_CH4 ((uint32_t)SYSCFG_CFGR1_TIM16_DMA_RMP) /*!< TIM16 DMA request remap
+ 0: No remap (TIM16_CH1 and TIM16_UP DMA requests mapped on DMA channel 3)
+ 1: Remap (TIM16_CH1 and TIM16_UP DMA requests mapped on DMA channel 4) */
+#define HAL_REMAPDMA_TIM17_DMA_CH2 ((uint32_t)SYSCFG_CFGR1_TIM17_DMA_RMP) /*!< TIM17 DMA request remap
+ 0: No remap (TIM17_CH1 and TIM17_UP DMA requests mapped on DMA channel 1
+ 1: Remap (TIM17_CH1 and TIM17_UP DMA requests mapped on DMA channel 2) */
+#if defined (STM32F070xB)
+#define HAL_REMAPDMA_USART3_DMA_CH32 ((uint32_t)SYSCFG_CFGR1_USART3_DMA_RMP) /*!< USART3 DMA request remapping bit. Available on STM32F070xB devices only.
+ 0: Disabled, need to remap before use
+ 1: Remap (USART3_RX and USART3_TX DMA requests mapped on DMA channel 3 and 2 respectively) */
+
+#endif
+
+#if defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx)
+#define HAL_REMAPDMA_TIM16_DMA_CH6 ((uint32_t)SYSCFG_CFGR1_TIM16_DMA_RMP2) /*!< TIM16 alternate DMA request remapping bit. Available on STM32F07x devices only
+ 0: No alternate remap (TIM16 DMA requestsmapped according to TIM16_DMA_RMP bit)
+ 1: Alternate remap (TIM16_CH1 and TIM16_UP DMA requests mapped on DMA channel 6) */
+#define HAL_REMAPDMA_TIM17_DMA_CH7 ((uint32_t)SYSCFG_CFGR1_TIM17_DMA_RMP2) /*!< TIM17 alternate DMA request remapping bit. Available on STM32F07x devices only
+ 0: No alternate remap (TIM17 DMA requestsmapped according to TIM17_DMA_RMP bit)
+ 1: Alternate remap (TIM17_CH1 and TIM17_UP DMA requests mapped on DMA channel 7) */
+#define HAL_REMAPDMA_SPI2_DMA_CH67 ((uint32_t)SYSCFG_CFGR1_SPI2_DMA_RMP) /*!< SPI2 DMA request remapping bit. Available on STM32F07x devices only.
+ 0: No remap (SPI2_RX and SPI2_TX DMA requests mapped on DMA channel 4 and 5 respectively)
+ 1: Remap (SPI2_RX and SPI2_TX DMA requests mapped on DMA channel 6 and 7 respectively) */
+#define HAL_REMAPDMA_USART2_DMA_CH67 ((uint32_t)SYSCFG_CFGR1_USART2_DMA_RMP) /*!< USART2 DMA request remapping bit. Available on STM32F07x devices only.
+ 0: No remap (USART2_RX and USART2_TX DMA requests mapped on DMA channel 5 and 4 respectively)
+ 1: 1: Remap (USART2_RX and USART2_TX DMA requests mapped on DMA channel 6 and 7 respectively) */
+#define HAL_REMAPDMA_USART3_DMA_CH32 ((uint32_t)SYSCFG_CFGR1_USART3_DMA_RMP) /*!< USART3 DMA request remapping bit. Available on STM32F07x devices only.
+ 0: No remap (USART3_RX and USART3_TX DMA requests mapped on DMA channel 6 and 7 respectively)
+ 1: Remap (USART3_RX and USART3_TX DMA requests mapped on DMA channel 3 and 2 respectively) */
+#define HAL_REMAPDMA_I2C1_DMA_CH76 ((uint32_t)SYSCFG_CFGR1_I2C1_DMA_RMP) /*!< I2C1 DMA request remapping bit. Available on STM32F07x devices only.
+ 0: No remap (I2C1_RX and I2C1_TX DMA requests mapped on DMA channel 3 and 2 respectively)
+ 1: Remap (I2C1_RX and I2C1_TX DMA requests mapped on DMA channel 7 and 6 respectively) */
+#define HAL_REMAPDMA_TIM1_DMA_CH6 ((uint32_t)SYSCFG_CFGR1_TIM1_DMA_RMP) /*!< TIM1 DMA request remapping bit. Available on STM32F07x devices only.
+ 0: No remap (TIM1_CH1, TIM1_CH2 and TIM1_CH3 DMA requests mapped on DMA channel 2, 3 and 4 respectively)
+ 1: Remap (TIM1_CH1, TIM1_CH2 and TIM1_CH3 DMA requests mapped on DMA channel 6 */
+#define HAL_REMAPDMA_TIM2_DMA_CH7 ((uint32_t)SYSCFG_CFGR1_TIM2_DMA_RMP) /*!< TIM2 DMA request remapping bit. Available on STM32F07x devices only.
+ 0: No remap (TIM2_CH2 and TIM2_CH4 DMA requests mapped on DMA channel 3 and 4 respectively)
+ 1: Remap (TIM2_CH2 and TIM2_CH4 DMA requests mapped on DMA channel 7 */
+#define HAL_REMAPDMA_TIM3_DMA_CH6 ((uint32_t)SYSCFG_CFGR1_TIM3_DMA_RMP) /*!< TIM3 DMA request remapping bit. Available on STM32F07x devices only.
+ 0: No remap (TIM3_CH1 and TIM3_TRIG DMA requests mapped on DMA channel 4)
+ 1: Remap (TIM3_CH1 and TIM3_TRIG DMA requests mapped on DMA channel 6) */
+#endif
+
+#if defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx)
+#define IS_HAL_REMAPDMA(RMP) (((RMP) == HAL_REMAPDMA_ADC_DMA_CH2) || \
+ ((RMP) == HAL_REMAPDMA_USART1_TX_DMA_CH4) || \
+ ((RMP) == HAL_REMAPDMA_USART1_RX_DMA_CH5) || \
+ ((RMP) == HAL_REMAPDMA_TIM16_DMA_CH4) || \
+ ((RMP) == HAL_REMAPDMA_TIM17_DMA_CH2) || \
+ ((RMP) == HAL_REMAPDMA_TIM16_DMA_CH6) || \
+ ((RMP) == HAL_REMAPDMA_TIM17_DMA_CH7) || \
+ ((RMP) == HAL_REMAPDMA_SPI2_DMA_CH67) || \
+ ((RMP) == HAL_REMAPDMA_USART2_DMA_CH67) || \
+ ((RMP) == HAL_REMAPDMA_USART3_DMA_CH32) || \
+ ((RMP) == HAL_REMAPDMA_I2C1_DMA_CH76) || \
+ ((RMP) == HAL_REMAPDMA_TIM1_DMA_CH6) || \
+ ((RMP) == HAL_REMAPDMA_TIM2_DMA_CH7) || \
+ ((RMP) == HAL_REMAPDMA_TIM3_DMA_CH6))
+#elif defined (STM32F070xB)
+#define IS_HAL_REMAPDMA(RMP) (((RMP) == HAL_REMAPDMA_USART3_DMA_CH32) || \
+ ((RMP) == HAL_REMAPDMA_ADC_DMA_CH2) || \
+ ((RMP) == HAL_REMAPDMA_USART1_TX_DMA_CH4) || \
+ ((RMP) == HAL_REMAPDMA_USART1_RX_DMA_CH5) || \
+ ((RMP) == HAL_REMAPDMA_TIM16_DMA_CH4) || \
+ ((RMP) == HAL_REMAPDMA_TIM17_DMA_CH2))
+#else
+#define IS_HAL_REMAPDMA(RMP) (((RMP) == HAL_REMAPDMA_ADC_DMA_CH2) || \
+ ((RMP) == HAL_REMAPDMA_USART1_TX_DMA_CH4) || \
+ ((RMP) == HAL_REMAPDMA_USART1_RX_DMA_CH5) || \
+ ((RMP) == HAL_REMAPDMA_TIM16_DMA_CH4) || \
+ ((RMP) == HAL_REMAPDMA_TIM17_DMA_CH2))
+#endif
+/**
+ * @}
+ */
+#endif /* SYSCFG_CFGR1_DMA_RMP */
+
+#if defined(SYSCFG_CFGR1_PA11_PA12_RMP)
+/** @defgroup HAL_Pin_remapping HAL Pin remapping
+ * @{
+ */
+#define HAL_REMAP_PA11_PA12 (SYSCFG_CFGR1_PA11_PA12_RMP) /*!< PA11 and PA12 remapping bit for small packages (28 and 20 pins).
+ 0: No remap (pin pair PA9/10 mapped on the pins)
+ 1: Remap (pin pair PA11/12 mapped instead of PA9/10) */
+
+#define IS_HAL_REMAP_PIN(RMP) ((RMP) == HAL_REMAP_PA11_PA12)
+/**
+ * @}
+ */
+#endif /* SYSCFG_CFGR1_PA11_PA12_RMP */
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+/** @defgroup HAL_IRDA_ENV_SEL HAL IRDA Enveloppe Selection
+ * @note Applicable on STM32F09x
+ * @{
+ */
+#define HAL_SYSCFG_IRDA_ENV_SEL_TIM16 (SYSCFG_CFGR1_IRDA_ENV_SEL_0 & SYSCFG_CFGR1_IRDA_ENV_SEL_1) /* 00: Timer16 is selected as IRDA Modulation enveloppe source */
+#define HAL_SYSCFG_IRDA_ENV_SEL_USART1 (SYSCFG_CFGR1_IRDA_ENV_SEL_0) /* 01: USART1 is selected as IRDA Modulation enveloppe source */
+#define HAL_SYSCFG_IRDA_ENV_SEL_USART4 (SYSCFG_CFGR1_IRDA_ENV_SEL_1) /* 10: USART4 is selected as IRDA Modulation enveloppe source */
+
+#define IS_HAL_SYSCFG_IRDA_ENV_SEL(SEL) (((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_TIM16) || \
+ ((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_USART1) || \
+ ((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_USART4))
+/**
+ * @}
+ */
+#endif /* STM32F091xC || STM32F098xx */
+
+
+/** @defgroup HAL_FastModePlus_I2C HAL FastModePlus I2C
+ * @{
+ */
+#if defined(SYSCFG_CFGR1_I2C_FMP_PB6)
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB6 (SYSCFG_CFGR1_I2C_FMP_PB6) /*!< Fast Mode Plus (FM+) driving capability activation on the pad
+ 0: PB6 pin operates in standard mode
+ 1: I2C FM+ mode enabled on PB6 pin, and the Speed control is bypassed */
+#endif /* SYSCFG_CFGR1_I2C_FMP_PB6 */
+
+#if defined(SYSCFG_CFGR1_I2C_FMP_PB7)
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB7 (SYSCFG_CFGR1_I2C_FMP_PB7) /*!< Fast Mode Plus (FM+) driving capability activation on the pad
+ 0: PB7 pin operates in standard mode
+ 1: I2C FM+ mode enabled on PB7 pin, and the Speed control is bypassed */
+#endif /* SYSCFG_CFGR1_I2C_FMP_PB7 */
+
+#if defined(SYSCFG_CFGR1_I2C_FMP_PB8)
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB8 (SYSCFG_CFGR1_I2C_FMP_PB8) /*!< Fast Mode Plus (FM+) driving capability activation on the pad
+ 0: PB8 pin operates in standard mode
+ 1: I2C FM+ mode enabled on PB8 pin, and the Speed control is bypassed */
+#endif /* SYSCFG_CFGR1_I2C_FMP_PB8 */
+
+#if defined(SYSCFG_CFGR1_I2C_FMP_PB9)
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB9 (SYSCFG_CFGR1_I2C_FMP_PB9) /*!< Fast Mode Plus (FM+) driving capability activation on the pad
+ 0: PB9 pin operates in standard mode
+ 1: I2C FM+ mode enabled on PB9 pin, and the Speed control is bypassed */
+#endif /* SYSCFG_CFGR1_I2C_FMP_PB9 */
+
+#if defined(SYSCFG_CFGR1_I2C_FMP_I2C1)
+#define HAL_SYSCFG_FASTMODEPLUS_I2C1 (SYSCFG_CFGR1_I2C_FMP_I2C1) /*!< I2C1 fast mode Plus driving capability activation
+ 0: FM+ mode is not enabled on I2C1 pins selected through AF selection bits
+ 1: FM+ mode is enabled on I2C1 pins selected through AF selection bits */
+#endif /* SYSCFG_CFGR1_I2C_FMP_I2C1 */
+
+#if defined(SYSCFG_CFGR1_I2C_FMP_I2C2)
+#define HAL_SYSCFG_FASTMODEPLUS_I2C2 (SYSCFG_CFGR1_I2C_FMP_I2C2) /*!< I2C2 fast mode Plus driving capability activation
+ 0: FM+ mode is not enabled on I2C2 pins selected through AF selection bits
+ 1: FM+ mode is enabled on I2C2 pins selected through AF selection bits */
+#endif /* SYSCFG_CFGR1_I2C_FMP_I2C2 */
+
+#if defined(SYSCFG_CFGR1_I2C_FMP_PA9)
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA9 (SYSCFG_CFGR1_I2C_FMP_PA9) /*!< Fast Mode Plus (FM+) driving capability activation on the pad
+ 0: PA9 pin operates in standard mode
+ 1: FM+ mode is enabled on PA9 pin, and the Speed control is bypassed */
+#endif /* SYSCFG_CFGR1_I2C_FMP_PA9 */
+
+#if defined(SYSCFG_CFGR1_I2C_FMP_PA10)
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA10 (SYSCFG_CFGR1_I2C_FMP_PA10) /*!< Fast Mode Plus (FM+) driving capability activation on the pad
+ 0: PA10 pin operates in standard mode
+ 1: FM+ mode is enabled on PA10 pin, and the Speed control is bypassed */
+#endif /* SYSCFG_CFGR1_I2C_FMP_PA10 */
+
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F042x6) || defined(STM32F048xx)
+#define IS_HAL_SYSCFG_FASTMODEPLUS_CONFIG(CONFIG) (((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C1) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C2) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PA9) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PA10) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB6) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB7) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB8) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB9))
+#elif defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)
+#define IS_HAL_SYSCFG_FASTMODEPLUS_CONFIG(CONFIG) (((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C1) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C2) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB6) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB7) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB8) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB9))
+#elif defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) || defined(STM32F070x6) || defined(STM32F070xB) || defined(STM32F030x6)
+#define IS_HAL_SYSCFG_FASTMODEPLUS_CONFIG(CONFIG) (((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C1) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PA9) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PA10) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB6) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB7) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB8) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB9))
+#else
+#define IS_HAL_SYSCFG_FASTMODEPLUS_CONFIG(CONFIG) (((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB6) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB7) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB8) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB9))
+#endif
+
+/**
+ * @}
+ */
+
+#if defined(STM32F091xC) || defined (STM32F098xx)
+/** @defgroup HAL_ISR_Wrapper HAL ISR Wrapper
+ * @brief ISR Wrapper
+ * @note applicable on STM32F09x
+ * @{
+ */
+#define HAL_SYSCFG_ITLINE0 ((uint32_t) 0x00000000) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE1 ((uint32_t) 0x00000001) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE2 ((uint32_t) 0x00000002) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE3 ((uint32_t) 0x00000003) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE4 ((uint32_t) 0x00000004) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE5 ((uint32_t) 0x00000005) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE6 ((uint32_t) 0x00000006) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE7 ((uint32_t) 0x00000007) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE8 ((uint32_t) 0x00000008) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE9 ((uint32_t) 0x00000009) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE10 ((uint32_t) 0x0000000A) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE11 ((uint32_t) 0x0000000B) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE12 ((uint32_t) 0x0000000C) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE13 ((uint32_t) 0x0000000D) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE14 ((uint32_t) 0x0000000E) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE15 ((uint32_t) 0x0000000F) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE16 ((uint32_t) 0x00000010) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE17 ((uint32_t) 0x00000011) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE18 ((uint32_t) 0x00000012) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE19 ((uint32_t) 0x00000013) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE20 ((uint32_t) 0x00000014) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE21 ((uint32_t) 0x00000015) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE22 ((uint32_t) 0x00000016) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE23 ((uint32_t) 0x00000017) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE24 ((uint32_t) 0x00000018) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE25 ((uint32_t) 0x00000019) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE26 ((uint32_t) 0x0000001A) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE27 ((uint32_t) 0x0000001B) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE28 ((uint32_t) 0x0000001C) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE29 ((uint32_t) 0x0000001D) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE30 ((uint32_t) 0x0000001E) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE31 ((uint32_t) 0x0000001F) /*!< Internal define for macro handling */
+
+#define HAL_ITLINE_EWDG ((uint32_t) ((HAL_SYSCFG_ITLINE0 << 0x18) | SYSCFG_ITLINE0_SR_EWDG)) /*!< EWDG has expired .... */
+#if defined(STM32F091xC)
+#define HAL_ITLINE_PVDOUT ((uint32_t) ((HAL_SYSCFG_ITLINE1 << 0x18) | SYSCFG_ITLINE1_SR_PVDOUT)) /*!< Power voltage detection Interrupt .... */
+#endif
+#define HAL_ITLINE_VDDIO2 ((uint32_t) ((HAL_SYSCFG_ITLINE1 << 0x18) | SYSCFG_ITLINE1_SR_VDDIO2)) /*!< VDDIO2 Interrupt .... */
+#define HAL_ITLINE_RTC_WAKEUP ((uint32_t) ((HAL_SYSCFG_ITLINE2 << 0x18) | SYSCFG_ITLINE2_SR_RTC_WAKEUP)) /*!< RTC WAKEUP -> exti[20] Interrupt */
+#define HAL_ITLINE_RTC_TSTAMP ((uint32_t) ((HAL_SYSCFG_ITLINE2 << 0x18) | SYSCFG_ITLINE2_SR_RTC_TSTAMP)) /*!< RTC Time Stamp -> exti[19] interrupt */
+#define HAL_ITLINE_RTC_ALRA ((uint32_t) ((HAL_SYSCFG_ITLINE2 << 0x18) | SYSCFG_ITLINE2_SR_RTC_ALRA)) /*!< RTC Alarm -> exti[17] interrupt .... */
+#define HAL_ITLINE_FLASH_ITF ((uint32_t) ((HAL_SYSCFG_ITLINE3 << 0x18) | SYSCFG_ITLINE3_SR_FLASH_ITF)) /*!< Flash ITF Interrupt */
+#define HAL_ITLINE_CRS ((uint32_t) ((HAL_SYSCFG_ITLINE4 << 0x18) | SYSCFG_ITLINE4_SR_CRS)) /*!< CRS Interrupt */
+#define HAL_ITLINE_CLK_CTRL ((uint32_t) ((HAL_SYSCFG_ITLINE4 << 0x18) | SYSCFG_ITLINE4_SR_CLK_CTRL)) /*!< CLK Control Interrupt */
+#define HAL_ITLINE_EXTI0 ((uint32_t) ((HAL_SYSCFG_ITLINE5 << 0x18) | SYSCFG_ITLINE5_SR_EXTI0)) /*!< External Interrupt 0 */
+#define HAL_ITLINE_EXTI1 ((uint32_t) ((HAL_SYSCFG_ITLINE5 << 0x18) | SYSCFG_ITLINE5_SR_EXTI1)) /*!< External Interrupt 1 */
+#define HAL_ITLINE_EXTI2 ((uint32_t) ((HAL_SYSCFG_ITLINE6 << 0x18) | SYSCFG_ITLINE6_SR_EXTI2)) /*!< External Interrupt 2 */
+#define HAL_ITLINE_EXTI3 ((uint32_t) ((HAL_SYSCFG_ITLINE6 << 0x18) | SYSCFG_ITLINE6_SR_EXTI3)) /*!< External Interrupt 3 */
+#define HAL_ITLINE_EXTI4 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI4)) /*!< EXTI4 Interrupt */
+#define HAL_ITLINE_EXTI5 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI5)) /*!< EXTI5 Interrupt */
+#define HAL_ITLINE_EXTI6 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI6)) /*!< EXTI6 Interrupt */
+#define HAL_ITLINE_EXTI7 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI7)) /*!< EXTI7 Interrupt */
+#define HAL_ITLINE_EXTI8 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI8)) /*!< EXTI8 Interrupt */
+#define HAL_ITLINE_EXTI9 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI9)) /*!< EXTI9 Interrupt */
+#define HAL_ITLINE_EXTI10 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI10)) /*!< EXTI10 Interrupt */
+#define HAL_ITLINE_EXTI11 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI11)) /*!< EXTI11 Interrupt */
+#define HAL_ITLINE_EXTI12 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI12)) /*!< EXTI12 Interrupt */
+#define HAL_ITLINE_EXTI13 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI13)) /*!< EXTI13 Interrupt */
+#define HAL_ITLINE_EXTI14 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI14)) /*!< EXTI14 Interrupt */
+#define HAL_ITLINE_EXTI15 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI15)) /*!< EXTI15 Interrupt */
+#define HAL_ITLINE_TSC_EOA ((uint32_t) ((HAL_SYSCFG_ITLINE8 << 0x18) | SYSCFG_ITLINE8_SR_TSC_EOA)) /*!< Touch control EOA Interrupt */
+#define HAL_ITLINE_TSC_MCE ((uint32_t) ((HAL_SYSCFG_ITLINE8 << 0x18) | SYSCFG_ITLINE8_SR_TSC_MCE)) /*!< Touch control MCE Interrupt */
+#define HAL_ITLINE_DMA1_CH1 ((uint32_t) ((HAL_SYSCFG_ITLINE9 << 0x18) | SYSCFG_ITLINE9_SR_DMA1_CH1)) /*!< DMA1 Channel 1 Interrupt */
+#define HAL_ITLINE_DMA1_CH2 ((uint32_t) ((HAL_SYSCFG_ITLINE10 << 0x18) | SYSCFG_ITLINE10_SR_DMA1_CH2)) /*!< DMA1 Channel 2 Interrupt */
+#define HAL_ITLINE_DMA1_CH3 ((uint32_t) ((HAL_SYSCFG_ITLINE10 << 0x18) | SYSCFG_ITLINE10_SR_DMA1_CH3)) /*!< DMA1 Channel 3 Interrupt */
+#define HAL_ITLINE_DMA2_CH1 ((uint32_t) ((HAL_SYSCFG_ITLINE10 << 0x18) | SYSCFG_ITLINE10_SR_DMA2_CH1)) /*!< DMA2 Channel 1 Interrupt */
+#define HAL_ITLINE_DMA2_CH2 ((uint32_t) ((HAL_SYSCFG_ITLINE10 << 0x18) | SYSCFG_ITLINE10_SR_DMA2_CH2)) /*!< DMA2 Channel 2 Interrupt */
+#define HAL_ITLINE_DMA1_CH4 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA1_CH4)) /*!< DMA1 Channel 4 Interrupt */
+#define HAL_ITLINE_DMA1_CH5 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA1_CH5)) /*!< DMA1 Channel 5 Interrupt */
+#define HAL_ITLINE_DMA1_CH6 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA1_CH6)) /*!< DMA1 Channel 6 Interrupt */
+#define HAL_ITLINE_DMA1_CH7 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA1_CH7)) /*!< DMA1 Channel 7 Interrupt */
+#define HAL_ITLINE_DMA2_CH3 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA2_CH3)) /*!< DMA2 Channel 3 Interrupt */
+#define HAL_ITLINE_DMA2_CH4 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA2_CH4)) /*!< DMA2 Channel 4 Interrupt */
+#define HAL_ITLINE_DMA2_CH5 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA2_CH5)) /*!< DMA2 Channel 5 Interrupt */
+#define HAL_ITLINE_ADC ((uint32_t) ((HAL_SYSCFG_ITLINE12 << 0x18) | SYSCFG_ITLINE12_SR_ADC)) /*!< ADC Interrupt */
+#define HAL_ITLINE_COMP1 ((uint32_t) ((HAL_SYSCFG_ITLINE12 << 0x18) | SYSCFG_ITLINE12_SR_COMP1)) /*!< COMP1 Interrupt -> exti[21] */
+#define HAL_ITLINE_COMP2 ((uint32_t) ((HAL_SYSCFG_ITLINE12 << 0x18) | SYSCFG_ITLINE12_SR_COMP2)) /*!< COMP2 Interrupt -> exti[21] */
+#define HAL_ITLINE_TIM1_BRK ((uint32_t) ((HAL_SYSCFG_ITLINE13 << 0x18) | SYSCFG_ITLINE13_SR_TIM1_BRK)) /*!< TIM1 BRK Interrupt */
+#define HAL_ITLINE_TIM1_UPD ((uint32_t) ((HAL_SYSCFG_ITLINE13 << 0x18) | SYSCFG_ITLINE13_SR_TIM1_UPD)) /*!< TIM1 UPD Interrupt */
+#define HAL_ITLINE_TIM1_TRG ((uint32_t) ((HAL_SYSCFG_ITLINE13 << 0x18) | SYSCFG_ITLINE13_SR_TIM1_TRG)) /*!< TIM1 TRG Interrupt */
+#define HAL_ITLINE_TIM1_CCU ((uint32_t) ((HAL_SYSCFG_ITLINE13 << 0x18) | SYSCFG_ITLINE13_SR_TIM1_CCU)) /*!< TIM1 CCU Interrupt */
+#define HAL_ITLINE_TIM1_CC ((uint32_t) ((HAL_SYSCFG_ITLINE14 << 0x18) | SYSCFG_ITLINE14_SR_TIM1_CC)) /*!< TIM1 CC Interrupt */
+#define HAL_ITLINE_TIM2 ((uint32_t) ((HAL_SYSCFG_ITLINE15 << 0x18) | SYSCFG_ITLINE15_SR_TIM2_GLB)) /*!< TIM2 Interrupt */
+#define HAL_ITLINE_TIM3 ((uint32_t) ((HAL_SYSCFG_ITLINE16 << 0x18) | SYSCFG_ITLINE16_SR_TIM3_GLB)) /*!< TIM3 Interrupt */
+#define HAL_ITLINE_DAC ((uint32_t) ((HAL_SYSCFG_ITLINE17 << 0x18) | SYSCFG_ITLINE17_SR_DAC)) /*!< DAC Interrupt */
+#define HAL_ITLINE_TIM6 ((uint32_t) ((HAL_SYSCFG_ITLINE17 << 0x18) | SYSCFG_ITLINE17_SR_TIM6_GLB)) /*!< TIM6 Interrupt */
+#define HAL_ITLINE_TIM7 ((uint32_t) ((HAL_SYSCFG_ITLINE18 << 0x18) | SYSCFG_ITLINE18_SR_TIM7_GLB)) /*!< TIM7 Interrupt */
+#define HAL_ITLINE_TIM14 ((uint32_t) ((HAL_SYSCFG_ITLINE19 << 0x18) | SYSCFG_ITLINE19_SR_TIM14_GLB)) /*!< TIM14 Interrupt */
+#define HAL_ITLINE_TIM15 ((uint32_t) ((HAL_SYSCFG_ITLINE20 << 0x18) | SYSCFG_ITLINE20_SR_TIM15_GLB)) /*!< TIM15 Interrupt */
+#define HAL_ITLINE_TIM16 ((uint32_t) ((HAL_SYSCFG_ITLINE21 << 0x18) | SYSCFG_ITLINE21_SR_TIM16_GLB)) /*!< TIM16 Interrupt */
+#define HAL_ITLINE_TIM17 ((uint32_t) ((HAL_SYSCFG_ITLINE22 << 0x18) | SYSCFG_ITLINE22_SR_TIM17_GLB)) /*!< TIM17 Interrupt */
+#define HAL_ITLINE_I2C1 ((uint32_t) ((HAL_SYSCFG_ITLINE23 << 0x18) | SYSCFG_ITLINE23_SR_I2C1_GLB)) /*!< I2C1 Interrupt -> exti[23] */
+#define HAL_ITLINE_I2C2 ((uint32_t) ((HAL_SYSCFG_ITLINE24 << 0x18) | SYSCFG_ITLINE24_SR_I2C2_GLB)) /*!< I2C2 Interrupt */
+#define HAL_ITLINE_SPI1 ((uint32_t) ((HAL_SYSCFG_ITLINE25 << 0x18) | SYSCFG_ITLINE25_SR_SPI1)) /*!< I2C1 Interrupt -> exti[23] */
+#define HAL_ITLINE_SPI2 ((uint32_t) ((HAL_SYSCFG_ITLINE26 << 0x18) | SYSCFG_ITLINE26_SR_SPI2)) /*!< SPI1 Interrupt */
+#define HAL_ITLINE_USART1 ((uint32_t) ((HAL_SYSCFG_ITLINE27 << 0x18) | SYSCFG_ITLINE27_SR_USART1_GLB)) /*!< USART1 GLB Interrupt -> exti[25] */
+#define HAL_ITLINE_USART2 ((uint32_t) ((HAL_SYSCFG_ITLINE28 << 0x18) | SYSCFG_ITLINE28_SR_USART2_GLB)) /*!< USART2 GLB Interrupt -> exti[26] */
+#define HAL_ITLINE_USART3 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART3_GLB)) /*!< USART3 Interrupt .... */
+#define HAL_ITLINE_USART4 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART4_GLB)) /*!< USART4 Interrupt .... */
+#define HAL_ITLINE_USART5 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART5_GLB)) /*!< USART5 Interrupt .... */
+#define HAL_ITLINE_USART6 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART6_GLB)) /*!< USART6 Interrupt .... */
+#define HAL_ITLINE_USART7 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART7_GLB)) /*!< USART7 Interrupt .... */
+#define HAL_ITLINE_USART8 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART8_GLB)) /*!< USART8 Interrupt .... */
+#define HAL_ITLINE_CAN ((uint32_t) ((HAL_SYSCFG_ITLINE30 << 0x18) | SYSCFG_ITLINE30_SR_CAN)) /*!< CAN Interrupt */
+#define HAL_ITLINE_CEC ((uint32_t) ((HAL_SYSCFG_ITLINE30 << 0x18) | SYSCFG_ITLINE30_SR_CEC)) /*!< CEC Interrupt -> exti[27] */
+/**
+ * @}
+ */
+#endif /* STM32F091xC || STM32F098xx */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup HAL_Exported_Macros HAL Exported Macros
+ * @{
+ */
+
+/** @defgroup HAL_Freeze_Unfreeze_Peripherals HAL Freeze Unfreeze Peripherals
+ * @brief Freeze/Unfreeze Peripherals in Debug mode
+ * @{
+ */
+
+#if defined(DBGMCU_APB1_FZ_DBG_CAN_STOP)
+#define __HAL_FREEZE_CAN_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN_STOP))
+#define __HAL_UNFREEZE_CAN_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_CAN_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_RTC_STOP)
+#define __HAL_FREEZE_RTC_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_RTC_STOP))
+#define __HAL_UNFREEZE_RTC_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_RTC_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_RTC_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT)
+#define __HAL_FREEZE_I2C1_TIMEOUT_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
+#define __HAL_UNFREEZE_I2C1_TIMEOUT_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
+#endif /* DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT */
+
+#if defined(DBGMCU_APB1_FZ_DBG_IWDG_STOP)
+#define __HAL_FREEZE_IWDG_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_IWDG_STOP))
+#define __HAL_UNFREEZE_IWDG_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_IWDG_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_IWDG_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_WWDG_STOP)
+#define __HAL_FREEZE_WWDG_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_WWDG_STOP))
+#define __HAL_UNFREEZE_WWDG_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_WWDG_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_WWDG_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM2_STOP)
+#define __HAL_FREEZE_TIM2_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM2_STOP))
+#define __HAL_UNFREEZE_TIM2_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM2_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM2_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM3_STOP)
+#define __HAL_FREEZE_TIM3_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM3_STOP))
+#define __HAL_UNFREEZE_TIM3_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM3_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM3_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM6_STOP)
+#define __HAL_FREEZE_TIM6_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM6_STOP))
+#define __HAL_UNFREEZE_TIM6_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM6_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM6_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM7_STOP)
+#define __HAL_FREEZE_TIM7_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM7_STOP))
+#define __HAL_UNFREEZE_TIM7_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM7_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM7_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM14_STOP)
+#define __HAL_FREEZE_TIM14_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM14_STOP))
+#define __HAL_UNFREEZE_TIM14_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM14_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM14_STOP */
+
+#if defined(DBGMCU_APB2_FZ_DBG_TIM1_STOP)
+#define __HAL_FREEZE_TIM1_DBGMCU() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM1_STOP))
+#define __HAL_UNFREEZE_TIM1_DBGMCU() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM1_STOP))
+#endif /* DBGMCU_APB2_FZ_DBG_TIM1_STOP */
+
+#if defined(DBGMCU_APB2_FZ_DBG_TIM15_STOP)
+#define __HAL_FREEZE_TIM15_DBGMCU() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM15_STOP))
+#define __HAL_UNFREEZE_TIM15_DBGMCU() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM15_STOP))
+#endif /* DBGMCU_APB2_FZ_DBG_TIM15_STOP */
+
+#if defined(DBGMCU_APB2_FZ_DBG_TIM16_STOP)
+#define __HAL_FREEZE_TIM16_DBGMCU() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM16_STOP))
+#define __HAL_UNFREEZE_TIM16_DBGMCU() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM16_STOP))
+#endif /* DBGMCU_APB2_FZ_DBG_TIM16_STOP */
+
+#if defined(DBGMCU_APB2_FZ_DBG_TIM17_STOP)
+#define __HAL_FREEZE_TIM17_DBGMCU() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM17_STOP))
+#define __HAL_UNFREEZE_TIM17_DBGMCU() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM17_STOP))
+#endif /* DBGMCU_APB2_FZ_DBG_TIM17_STOP */
+
+/**
+ * @}
+ */
+
+/** @defgroup Memory_Mapping_Selection Memory Mapping Selection
+ * @{
+ */
+#if defined(SYSCFG_CFGR1_MEM_MODE)
+/** @brief Main Flash memory mapped at 0x00000000
+ */
+#define __HAL_REMAPMEMORY_FLASH() (SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_MEM_MODE))
+#endif /* SYSCFG_CFGR1_MEM_MODE */
+
+#if defined(SYSCFG_CFGR1_MEM_MODE_0)
+/** @brief System Flash memory mapped at 0x00000000
+ */
+#define __HAL_REMAPMEMORY_SYSTEMFLASH() do {SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_MEM_MODE); \
+ SYSCFG->CFGR1 |= SYSCFG_CFGR1_MEM_MODE_0; \
+ }while(0)
+#endif /* SYSCFG_CFGR1_MEM_MODE_0 */
+
+#if defined(SYSCFG_CFGR1_MEM_MODE_0) && defined(SYSCFG_CFGR1_MEM_MODE_1)
+/** @brief Embedded SRAM mapped at 0x00000000
+ */
+#define __HAL_REMAPMEMORY_SRAM() do {SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_MEM_MODE); \
+ SYSCFG->CFGR1 |= (SYSCFG_CFGR1_MEM_MODE_0 | SYSCFG_CFGR1_MEM_MODE_1); \
+ }while(0)
+#endif /* SYSCFG_CFGR1_MEM_MODE_0 && SYSCFG_CFGR1_MEM_MODE_1 */
+/**
+ * @}
+ */
+
+#if defined(SYSCFG_CFGR1_DMA_RMP)
+/** @defgroup HAL_DMA_remap HAL DMA remap
+ * @brief DMA remapping enable/disable macros
+ * @param __DMA_REMAP__: This parameter can be a value of @ref HAL_DMA_remapping
+ * @{
+ */
+#define __HAL_REMAPDMA_CHANNEL_ENABLE(__DMA_REMAP__) do {assert_param(IS_HAL_REMAPDMA((__DMA_REMAP__))); \
+ SYSCFG->CFGR1 |= (__DMA_REMAP__); \
+ }while(0)
+#define __HAL_REMAPDMA_CHANNEL_DISABLE(__DMA_REMAP__) do {assert_param(IS_HAL_REMAPDMA((__DMA_REMAP__))); \
+ SYSCFG->CFGR1 &= ~(__DMA_REMAP__); \
+ }while(0)
+/**
+ * @}
+ */
+#endif /* SYSCFG_CFGR1_DMA_RMP */
+
+#if defined(SYSCFG_CFGR1_PA11_PA12_RMP)
+/** @defgroup HAL_Pin_remap HAL Pin remap
+ * @brief Pin remapping enable/disable macros
+ * @param __PIN_REMAP__: This parameter can be a value of @ref HAL_Pin_remapping
+ * @{
+ */
+#define __HAL_REMAP_PIN_ENABLE(__PIN_REMAP__) do {assert_param(IS_HAL_REMAP_PIN((__PIN_REMAP__))); \
+ SYSCFG->CFGR1 |= (__PIN_REMAP__); \
+ }while(0)
+#define __HAL_REMAP_PIN_DISABLE(__PIN_REMAP__) do {assert_param(IS_HAL_REMAP_PIN((__PIN_REMAP__))); \
+ SYSCFG->CFGR1 &= ~(__PIN_REMAP__); \
+ }while(0)
+/**
+ * @}
+ */
+#endif /* SYSCFG_CFGR1_PA11_PA12_RMP */
+
+/** @defgroup HAL_Fast_mode_plus_driving_cap HAL Fast mode plus driving cap
+ * @brief Fast mode Plus driving capability enable/disable macros
+ * @param __FASTMODEPLUS__: This parameter can be a value of @ref HAL_FastModePlus_I2C
+ * @{
+ */
+#define __HAL_SYSCFG_FASTMODEPLUS_ENABLE(__FASTMODEPLUS__) do {assert_param(IS_HAL_SYSCFG_FASTMODEPLUS_CONFIG((__FASTMODEPLUS__))); \
+ SYSCFG->CFGR1 |= (__FASTMODEPLUS__); \
+ }while(0)
+
+#define __HAL_SYSCFG_FASTMODEPLUS_DISABLE(__FASTMODEPLUS__) do {assert_param(IS_HAL_SYSCFG_FASTMODEPLUS_CONFIG((__FASTMODEPLUS__))); \
+ SYSCFG->CFGR1 &= ~(__FASTMODEPLUS__); \
+ }while(0)
+/**
+ * @}
+ */
+
+#if defined(SYSCFG_CFGR2_LOCKUP_LOCK)
+/** @defgroup Cortex_Lockup_Enable Cortex Lockup Enable
+ * @{
+ */
+/** @brief SYSCFG Break Lockup lock
+ * Enables and locks the connection of Cortex-M0 LOCKUP (Hardfault) output to TIM1/15/16/17 Break input
+ * @note The selected configuration is locked and can be unlocked by system reset
+ */
+#define __HAL_SYSCFG_BREAK_LOCKUP_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_LOCKUP_LOCK); \
+ SYSCFG->CFGR2 |= SYSCFG_CFGR2_LOCKUP_LOCK; \
+ }while(0)
+/**
+ * @}
+ */
+#endif /* SYSCFG_CFGR2_LOCKUP_LOCK */
+
+#if defined(SYSCFG_CFGR2_PVD_LOCK)
+/** @defgroup PVD_Lock_Enable PVD Lock
+ * @{
+ */
+/** @brief SYSCFG Break PVD lock
+ * Enables and locks the PVD connection with Timer1/8/15/16/17 Break Input, , as well as the PVDE and PLS[2:0] in the PWR_CR register
+ * @note The selected configuration is locked and can be unlocked by system reset
+ */
+#define __HAL_SYSCFG_BREAK_PVD_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_PVD_LOCK); \
+ SYSCFG->CFGR2 |= SYSCFG_CFGR2_PVD_LOCK; \
+ }while(0)
+/**
+ * @}
+ */
+#endif /* SYSCFG_CFGR2_PVD_LOCK */
+
+#if defined(SYSCFG_CFGR2_SRAM_PARITY_LOCK)
+/** @defgroup SRAM_Parity_Lock SRAM Parity Lock
+ * @{
+ */
+/** @brief SYSCFG Break SRAM PARITY lock
+ * Enables and locks the SRAM_PARITY error signal with Break Input of TIMER1/8/15/16/17
+ * @note The selected configuration is locked and can be unlocked by system reset
+ */
+#define __HAL_SYSCFG_BREAK_SRAMPARITY_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_SRAM_PARITY_LOCK); \
+ SYSCFG->CFGR2 |= SYSCFG_CFGR2_SRAM_PARITY_LOCK; \
+ }while(0)
+/**
+ * @}
+ */
+#endif /* SYSCFG_CFGR2_SRAM_PARITY_LOCK */
+
+#if defined(SYSCFG_CFGR2_SRAM_PEF)
+/** @defgroup HAL_SYSCFG_Parity_check_on_RAM HAL SYSCFG Parity check on RAM
+ * @brief Parity check on RAM disable macro
+ * @note Disabling the parity check on RAM locks the configuration bit.
+ * To re-enable the parity check on RAM perform a system reset.
+ * @{
+ */
+#define __HAL_SYSCFG_RAM_PARITYCHECK_DISABLE() (SYSCFG->CFGR2 |= SYSCFG_CFGR2_SRAM_PEF)
+/**
+ * @}
+ */
+#endif /* SYSCFG_CFGR2_SRAM_PEF */
+
+
+#if defined(STM32F091xC) || defined (STM32F098xx)
+/** @defgroup HAL_ISR_wrapper_check HAL ISR wrapper check
+ * @brief ISR wrapper check
+ * @note This feature is applicable on STM32F09x
+ * @note Allow to determine interrupt source per line.
+ * @{
+ */
+#define __HAL_GET_PENDING_IT(__SOURCE__) (SYSCFG->IT_LINE_SR[((__SOURCE__) >> 0x18)] & ((__SOURCE__) & 0x00FFFFFF))
+/**
+ * @}
+ */
+#endif /* (STM32F091xC) || defined (STM32F098xx)*/
+
+#if defined(STM32F091xC) || defined (STM32F098xx)
+/** @defgroup HAL_SYSCFG_IRDA_modulation_envelope_selection HAL SYSCFG IRDA modulation envelope selection
+ * @brief selection of the modulation envelope signal macro, using bits [7:6] of SYS_CTRL(CFGR1) register
+ * @note This feature is applicable on STM32F09x
+ * @param __SOURCE__: This parameter can be a value of @ref HAL_IRDA_ENV_SEL
+ * @{
+ */
+#define __HAL_SYSCFG_IRDA_ENV_SELECTION(__SOURCE__) do {assert_param(IS_HAL_SYSCFG_IRDA_ENV_SEL((__SOURCE__))); \
+ SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_IRDA_ENV_SEL); \
+ SYSCFG->CFGR1 |= (__SOURCE__); \
+ }while(0)
+
+#define __HAL_SYSCFG_GET_IRDA_ENV_SELECTION() ((SYSCFG->CFGR1) & 0x000000C0)
+/**
+ * @}
+ */
+#endif /* (STM32F091xC) || defined (STM32F098xx)*/
+
+/**
+ * @}
+ */
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup HAL_Exported_Functions HAL Exported Functions
+ * @{
+ */
+
+/** @addtogroup HAL_Exported_Functions_Group1 Initialization and de-initialization Functions
+ * @brief Initialization and de-initialization functions
+ * @{
+ */
+/* Initialization and de-initialization functions ******************************/
+HAL_StatusTypeDef HAL_Init(void);
+HAL_StatusTypeDef HAL_DeInit(void);
+void HAL_MspInit(void);
+void HAL_MspDeInit(void);
+HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority);
+/**
+ * @}
+ */
+
+/** @addtogroup HAL_Exported_Functions_Group2 HAL Control functions
+ * @brief HAL Control functions
+ * @{
+ */
+/* Peripheral Control functions **********************************************/
+void HAL_IncTick(void);
+void HAL_Delay(__IO uint32_t Delay);
+uint32_t HAL_GetTick(void);
+void HAL_SuspendTick(void);
+void HAL_ResumeTick(void);
+uint32_t HAL_GetHalVersion(void);
+uint32_t HAL_GetREVID(void);
+uint32_t HAL_GetDEVID(void);
+void HAL_EnableDBGStopMode(void);
+void HAL_DisableDBGStopMode(void);
+void HAL_EnableDBGStandbyMode(void);
+void HAL_DisableDBGStandbyMode(void);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/include/stm32f0xx_hal_adc.h b/f0/include/stm32f0xx_hal_adc.h
new file mode 100755
index 0000000000000000000000000000000000000000..46f5ab21751401dd8d47a689d0d6487fbb544ad5
--- /dev/null
+++ b/f0/include/stm32f0xx_hal_adc.h
@@ -0,0 +1,951 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_adc.h
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief Header file containing functions prototypes of ADC HAL library.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_ADC_H
+#define __STM32F0xx_HAL_ADC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup ADC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup ADC_Exported_Types ADC Exported Types
+ * @{
+ */
+
+/**
+ * @brief Structure definition of ADC initialization and regular group
+ * @note The setting of these parameters with function HAL_ADC_Init() is conditioned to ADC state.
+ * ADC state can be either:
+ * - For all parameters: ADC disabled (this is the only possible ADC state to modify parameter 'ClockPrescaler')
+ * - For all parameters except 'ClockPrescaler': ADC enabled without conversion on going on regular group.
+ * If ADC is not in the appropriate state to modify some parameters, these parameters setting is bypassed
+ * without error reporting (as it can be the expected behaviour in case of intended action to update another parameter (which fulfills the ADC state condition) on the fly).
+ */
+typedef struct
+{
+ uint32_t ClockPrescaler; /*!< Select ADC clock source (synchronous clock derived from APB clock or asynchronous clock derived from ADC dedicated HSI RC oscillator 14MHz) and clock prescaler.
+ This parameter can be a value of @ref ADC_ClockPrescaler
+ Note: In case of usage of the ADC dedicated HSI RC oscillator, it must be preliminarily enabled at RCC top level.
+ Note: This parameter can be modified only if the ADC is disabled */
+ uint32_t Resolution; /*!< Configures the ADC resolution.
+ This parameter can be a value of @ref ADC_Resolution */
+ uint32_t DataAlign; /*!< Specifies whether the ADC data alignment is left or right.
+ This parameter can be a value of @ref ADC_Data_align */
+ uint32_t ScanConvMode; /*!< Configures the sequencer of regular group.
+ This parameter can be associated to parameter 'DiscontinuousConvMode' to have main sequence subdivided in successive parts.
+ Sequencer is automatically enabled if several channels are set (sequencer cannot be disabled, as it can be the case on other STM32 devices):
+ If only 1 channel is set: Conversion is performed in single mode.
+ If several channels are set: Conversions are performed in sequence mode (ranks defined by each channel number: channel 0 fixed on rank 0, channel 1 fixed on rank1, ...).
+ Scan direction can be set to forward (from channel 0 to channel 18) or backward (from channel 18 to channel 0).
+ This parameter can be a value of @ref ADC_Scan_mode */
+ uint32_t EOCSelection; /*!< Specifies what EOC (End Of Conversion) flag is used for conversion by polling and interruption: end of conversion of each rank or complete sequence.
+ This parameter can be a value of @ref ADC_EOCSelection. */
+ uint32_t LowPowerAutoWait; /*!< Selects the dynamic low power Auto Delay: new conversion start only when the previous
+ conversion (for regular group) or previous sequence (for injected group) has been treated by user software.
+ This feature automatically adapts the speed of ADC to the speed of the system that reads the data. Moreover, this avoids risk of overrun for low frequency applications.
+ This parameter can be set to ENABLE or DISABLE.
+ Note: Do not use with interruption or DMA (HAL_ADC_Start_IT(), HAL_ADC_Start_DMA()) since they have to clear immediately the EOC flag to free the IRQ vector sequencer.
+ Do use with polling: 1. Start conversion with HAL_ADC_Start(), 2. Later on, when conversion data is needed: use HAL_ADC_PollForConversion() to ensure that conversion is completed
+ and use HAL_ADC_GetValue() to retrieve conversion result and trig another conversion. */
+ uint32_t LowPowerAutoPowerOff; /*!< Selects the auto-off mode: the ADC automatically powers-off after a conversion and automatically wakes-up when a new conversion is triggered (with startup time between trigger and start of sampling).
+ This feature can be combined with automatic wait mode (parameter 'LowPowerAutoWait').
+ This parameter can be set to ENABLE or DISABLE.
+ Note: If enabled, this feature also turns off the ADC dedicated 14 MHz RC oscillator (HSI14) */
+ uint32_t ContinuousConvMode; /*!< Specifies whether the conversion is performed in single mode (one conversion) or continuous mode for regular group,
+ after the selected trigger occurred (software start or external trigger).
+ This parameter can be set to ENABLE or DISABLE. */
+ uint32_t DiscontinuousConvMode; /*!< Specifies whether the conversions sequence of regular group is performed in Complete-sequence/Discontinuous-sequence (main sequence subdivided in successive parts).
+ Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded.
+ Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded.
+ This parameter can be set to ENABLE or DISABLE
+ Note: Number of discontinuous ranks increment is fixed to one-by-one. */
+ uint32_t ExternalTrigConv; /*!< Selects the external event used to trigger the conversion start of regular group.
+ If set to ADC_SOFTWARE_START, external triggers are disabled.
+ This parameter can be a value of @ref ADC_External_trigger_source_Regular */
+ uint32_t ExternalTrigConvEdge; /*!< Selects the external trigger edge of regular group.
+ If trigger is set to ADC_SOFTWARE_START, this parameter is discarded.
+ This parameter can be a value of @ref ADC_External_trigger_edge_Regular */
+ uint32_t DMAContinuousRequests; /*!< Specifies whether the DMA requests are performed in one shot mode (DMA transfer stop when number of conversions is reached)
+ or in Continuous mode (DMA transfer unlimited, whatever number of conversions).
+ Note: In continuous mode, DMA must be configured in circular mode. Otherwise an overrun will be triggered when DMA buffer maximum pointer is reached.
+ This parameter can be set to ENABLE or DISABLE. */
+ uint32_t Overrun; /*!< Select the behaviour in case of overrun: data preserved or overwritten
+ This parameter has an effect on regular group only, including in DMA mode.
+ This parameter can be a value of @ref ADC_Overrun */
+}ADC_InitTypeDef;
+
+/**
+ * @brief Structure definition of ADC channel for regular group
+ * @note The setting of these parameters with function HAL_ADC_ConfigChannel() is conditioned to ADC state.
+ * ADC state can be either:
+ * - For all parameters: ADC disabled or enabled without conversion on going on regular group.
+ * If ADC is not in the appropriate state to modify some parameters, these parameters setting is bypassed
+ * without error reporting (as it can be the expected behaviour in case of intended action to update another parameter (which fulfills the ADC state condition) on the fly).
+ */
+typedef struct
+{
+ uint32_t Channel; /*!< Specifies the channel to configure into ADC regular group.
+ This parameter can be a value of @ref ADC_channels
+ Note: Depending on devices, some channels may not be available on package pins. Refer to device datasheet for channels availability. */
+ uint32_t Rank; /*!< Add or remove the channel from ADC regular group sequencer.
+ On STM32F0 devices, rank is defined by each channel number (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...).
+ Despite the channel rank is fixed, this parameter allow an additional possibility: to remove the selected rank (selected channel) from sequencer.
+ This parameter can be a value of @ref ADC_rank */
+ uint32_t SamplingTime; /*!< Sampling time value to be set for the selected channel.
+ Unit: ADC clock cycles
+ Conversion time is the addition of sampling time and processing time (12.5 ADC clock cycles at ADC resolution 12 bits, 10.5 cycles at 10 bits, 8.5 cycles at 8 bits, 6.5 cycles at 6 bits).
+ This parameter can be a value of @ref ADC_sampling_times
+ Caution: this setting impacts the entire regular group. Therefore, call of HAL_ADC_ConfigChannel() to configure a channel can impact the configuration of other channels previously set.
+ Note: In case of usage of internal measurement channels (VrefInt/Vbat/TempSensor),
+ sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting)
+ Refer to device datasheet for timings values, parameters TS_vrefint, TS_vbat, TS_temp (values rough order: 5us to 17us). */
+}ADC_ChannelConfTypeDef;
+
+/**
+ * @brief Structure definition of ADC analog watchdog
+ * @note The setting of these parameters with function HAL_ADC_AnalogWDGConfig() is conditioned to ADC state.
+ * ADC state can be either: ADC disabled or ADC enabled without conversion on going on regular group.
+ */
+typedef struct
+{
+ uint32_t WatchdogMode; /*!< Configures the ADC analog watchdog mode: single/all/none channels.
+ This parameter can be a value of @ref ADC_analog_watchdog_mode. */
+ uint32_t Channel; /*!< Selects which ADC channel to monitor by analog watchdog.
+ This parameter has an effect only if parameter 'WatchdogMode' is configured on single channel. Only 1 channel can be monitored.
+ This parameter can be a value of @ref ADC_channels. */
+ uint32_t ITMode; /*!< Specifies whether the analog watchdog is configured in interrupt or polling mode.
+ This parameter can be set to ENABLE or DISABLE */
+ uint32_t HighThreshold; /*!< Configures the ADC analog watchdog High threshold value.
+ Depending of ADC resolution selected (12, 10, 8 or 6 bits), this parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively. */
+ uint32_t LowThreshold; /*!< Configures the ADC analog watchdog High threshold value.
+ Depending of ADC resolution selected (12, 10, 8 or 6 bits), this parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively. */
+}ADC_AnalogWDGConfTypeDef;
+
+/**
+ * @brief HAL ADC state machine: ADC States structure definition
+ */
+typedef enum
+{
+ HAL_ADC_STATE_RESET = 0x00, /*!< ADC not yet initialized or disabled */
+ HAL_ADC_STATE_READY = 0x01, /*!< ADC peripheral ready for use */
+ HAL_ADC_STATE_BUSY = 0x02, /*!< An internal process is ongoing */
+ HAL_ADC_STATE_BUSY_REG = 0x12, /*!< Regular conversion is ongoing */
+ HAL_ADC_STATE_BUSY_INJ = 0x22, /*!< Not used on STM32F0xx devices (kept for compatibility with other devices featuring an injected group) */
+ HAL_ADC_STATE_BUSY_INJ_REG = 0x32, /*!< Not used on STM32F0xx devices (kept for compatibility with other devices featuring an injected group) */
+ HAL_ADC_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_ADC_STATE_ERROR = 0x04, /*!< ADC state error */
+ HAL_ADC_STATE_EOC = 0x05, /*!< Conversion is completed */
+ HAL_ADC_STATE_EOC_REG = 0x15, /*!< Regular conversion is completed */
+ HAL_ADC_STATE_EOC_INJ = 0x25, /*!< Not used on STM32F0xx devices (kept for compatibility with other devices featuring an injected group) */
+ HAL_ADC_STATE_EOC_INJ_REG = 0x35, /*!< Not used on STM32F0xx devices (kept for compatibility with other devices featuring an injected group) */
+ HAL_ADC_STATE_AWD = 0x06, /*!< ADC state analog watchdog */
+ HAL_ADC_STATE_AWD2 = 0x07, /*!< Not used on STM32F0xx devices (kept for compatibility with other devices featuring several AWD) */
+ HAL_ADC_STATE_AWD3 = 0x08, /*!< Not used on STM32F0xx devices (kept for compatibility with other devices featuring several AWD) */
+}HAL_ADC_StateTypeDef;
+
+/**
+ * @brief ADC handle Structure definition
+ */
+typedef struct
+{
+ ADC_TypeDef *Instance; /*!< Register base address */
+
+ ADC_InitTypeDef Init; /*!< ADC required parameters */
+
+ __IO uint32_t NbrOfConversionRank ; /*!< ADC conversion rank counter */
+
+ DMA_HandleTypeDef *DMA_Handle; /*!< Pointer DMA Handler */
+
+ HAL_LockTypeDef Lock; /*!< ADC locking object */
+
+ __IO HAL_ADC_StateTypeDef State; /*!< ADC communication state */
+
+ __IO uint32_t ErrorCode; /*!< ADC Error code */
+}ADC_HandleTypeDef;
+/**
+ * @}
+ */
+
+
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup ADC_Exported_Constants ADC Exported Constants
+ * @{
+ */
+
+/** @defgroup ADC_Error_Code ADC Error Code
+ * @{
+ */
+#define HAL_ADC_ERROR_NONE ((uint32_t)0x00) /*!< No error */
+#define HAL_ADC_ERROR_INTERNAL ((uint32_t)0x01) /*!< ADC IP internal error: if problem of clocking,
+ enable/disable, erroneous state */
+#define HAL_ADC_ERROR_OVR ((uint32_t)0x02) /*!< Overrun error */
+#define HAL_ADC_ERROR_DMA ((uint32_t)0x04) /*!< DMA transfer error */
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_ClockPrescaler ADC ClockPrescaler
+ * @{
+ */
+#define ADC_CLOCK_ASYNC ((uint32_t)0x00000000) /*!< ADC asynchronous clock derived from ADC dedicated HSI */
+
+#define ADC_CLOCK_SYNC_PCLK_DIV2 ((uint32_t)ADC_CFGR2_CKMODE_0) /*!< ADC synchronous clock derived from AHB clock divided by a prescaler of 2 */
+#define ADC_CLOCK_SYNC_PCLK_DIV4 ((uint32_t)ADC_CFGR2_CKMODE_1) /*!< ADC synchronous clock derived from AHB clock divided by a prescaler of 4 */
+
+#define ADC_CLOCKPRESCALER_PCLK_DIV2 ADC_CLOCK_SYNC_PCLK_DIV2 /* Obsolete naming, kept for compatibility with some other devices */
+#define ADC_CLOCKPRESCALER_PCLK_DIV4 ADC_CLOCK_SYNC_PCLK_DIV4 /* Obsolete naming, kept for compatibility with some other devices */
+
+#define IS_ADC_CLOCKPRESCALER(ADC_CLOCK) (((ADC_CLOCK) == ADC_CLOCK_ASYNC) || \
+ ((ADC_CLOCK) == ADC_CLOCK_SYNC_PCLK_DIV2) || \
+ ((ADC_CLOCK) == ADC_CLOCK_SYNC_PCLK_DIV4) )
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Resolution ADC Resolution
+ * @{
+ */
+#define ADC_RESOLUTION12b ((uint32_t)0x00000000) /*!< ADC 12-bit resolution */
+#define ADC_RESOLUTION10b ((uint32_t)ADC_CFGR1_RES_0) /*!< ADC 10-bit resolution */
+#define ADC_RESOLUTION8b ((uint32_t)ADC_CFGR1_RES_1) /*!< ADC 8-bit resolution */
+#define ADC_RESOLUTION6b ((uint32_t)ADC_CFGR1_RES) /*!< ADC 6-bit resolution */
+
+#define IS_ADC_RESOLUTION(RESOLUTION) (((RESOLUTION) == ADC_RESOLUTION12b) || \
+ ((RESOLUTION) == ADC_RESOLUTION10b) || \
+ ((RESOLUTION) == ADC_RESOLUTION8b) || \
+ ((RESOLUTION) == ADC_RESOLUTION6b) )
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Data_align ADC Data_align
+ * @{
+ */
+#define ADC_DATAALIGN_RIGHT ((uint32_t)0x00000000)
+#define ADC_DATAALIGN_LEFT ((uint32_t)ADC_CFGR1_ALIGN)
+
+#define IS_ADC_DATA_ALIGN(ALIGN) (((ALIGN) == ADC_DATAALIGN_RIGHT) || \
+ ((ALIGN) == ADC_DATAALIGN_LEFT) )
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Scan_mode ADC Scan mode
+ * @{
+ */
+/* Note: Scan mode values must be compatible with other STM32 devices having */
+/* a configurable sequencer. */
+/* Scan direction setting values are defined by taking in account */
+/* already defined values for other STM32 devices: */
+/* ADC_SCAN_DISABLE ((uint32_t)0x00000000) */
+/* ADC_SCAN_ENABLE ((uint32_t)0x00000001) */
+/* Scan direction forward is considered as default setting equivalent */
+/* to scan enable. */
+/* Scan direction backward is considered as additional setting. */
+/* In case of migration from another STM32 device, the user will be */
+/* warned of change of setting choices with assert check. */
+#define ADC_SCAN_DIRECTION_FORWARD ((uint32_t)0x00000001) /*!< Scan direction forward: from channel 0 to channel 18 */
+#define ADC_SCAN_DIRECTION_BACKWARD ((uint32_t)0x00000002) /*!< Scan direction backward: from channel 18 to channel 0 */
+
+#define ADC_SCAN_ENABLE ADC_SCAN_DIRECTION_FORWARD /* For compatibility with other STM32 devices */
+
+#define IS_ADC_SCAN_MODE(SCAN_MODE) (((SCAN_MODE) == ADC_SCAN_DIRECTION_FORWARD) || \
+ ((SCAN_MODE) == ADC_SCAN_DIRECTION_BACKWARD) )
+/**
+ * @}
+ */
+
+/** @defgroup ADC_External_trigger_edge_Regular ADC External trigger edge Regular
+ * @{
+ */
+#define ADC_EXTERNALTRIGCONVEDGE_NONE ((uint32_t)0x00000000)
+#define ADC_EXTERNALTRIGCONVEDGE_RISING ((uint32_t)ADC_CFGR1_EXTEN_0)
+#define ADC_EXTERNALTRIGCONVEDGE_FALLING ((uint32_t)ADC_CFGR1_EXTEN_1)
+#define ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING ((uint32_t)ADC_CFGR1_EXTEN)
+
+#define IS_ADC_EXTTRIG_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGCONVEDGE_NONE) || \
+ ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_RISING) || \
+ ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_FALLING) || \
+ ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING) )
+/**
+ * @}
+ */
+
+/** @defgroup ADC_External_trigger_source_Regular ADC External trigger source Regular
+ * @{
+ */
+/* List of external triggers with generic trigger name, sorted by trigger */
+/* name: */
+
+/* External triggers of regular group for ADC1 */
+#define ADC_EXTERNALTRIGCONV_T1_TRGO ADC1_2_EXTERNALTRIG_T1_TRGO
+#define ADC_EXTERNALTRIGCONV_T1_CC4 ADC1_2_EXTERNALTRIG_T1_CC4
+#define ADC_EXTERNALTRIGCONV_T2_TRGO ADC1_2_EXTERNALTRIG_T2_TRGO
+#define ADC_EXTERNALTRIGCONV_T3_TRGO ADC1_2_EXTERNALTRIG_T3_TRGO
+#define ADC_EXTERNALTRIGCONV_T15_TRGO ADC1_2_EXTERNALTRIG_T15_TRGO
+#define ADC_SOFTWARE_START ((uint32_t)0x00000010)
+
+#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC4) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T15_TRGO) || \
+ ((REGTRIG) == ADC_SOFTWARE_START) )
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Internal_HAL_driver_Ext_trig_src_Regular ADC Internal HAL driver Ext trig src Regular
+ * @{
+ */
+
+/* List of external triggers of regular group for ADC1: */
+/* (used internally by HAL driver. To not use into HAL structure parameters) */
+#define ADC1_2_EXTERNALTRIG_T1_TRGO ((uint32_t)0x00000000)
+#define ADC1_2_EXTERNALTRIG_T1_CC4 ((uint32_t)ADC_CFGR1_EXTSEL_0)
+#define ADC1_2_EXTERNALTRIG_T2_TRGO ((uint32_t)ADC_CFGR1_EXTSEL_1)
+#define ADC1_2_EXTERNALTRIG_T3_TRGO ((uint32_t)(ADC_CFGR1_EXTSEL_1 | ADC_CFGR1_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_T15_TRGO ((uint32_t)ADC_CFGR1_EXTSEL_2)
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_EOCSelection ADC EOCSelection
+ * @{
+ */
+#define EOC_SINGLE_CONV ((uint32_t) ADC_ISR_EOC)
+#define EOC_SEQ_CONV ((uint32_t) ADC_ISR_EOS)
+#define EOC_SINGLE_SEQ_CONV ((uint32_t)(ADC_ISR_EOC | ADC_ISR_EOS)) /*!< reserved for future use */
+
+#define IS_ADC_EOC_SELECTION(EOC_SELECTION) (((EOC_SELECTION) == EOC_SINGLE_CONV) || \
+ ((EOC_SELECTION) == EOC_SEQ_CONV) || \
+ ((EOC_SELECTION) == EOC_SINGLE_SEQ_CONV) )
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Overrun ADC Overrun
+ * @{
+ */
+#define OVR_DATA_OVERWRITTEN ((uint32_t)0x00000000)
+#define OVR_DATA_PRESERVED ((uint32_t)0x00000001)
+
+#define IS_ADC_OVERRUN(OVR) (((OVR) == OVR_DATA_PRESERVED) || \
+ ((OVR) == OVR_DATA_OVERWRITTEN) )
+/**
+ * @}
+ */
+
+/** @defgroup ADC_channels ADC channels
+ * @{
+ */
+/* Note: Depending on devices, some channels may not be available on package */
+/* pins. Refer to device datasheet for channels availability. */
+/* Note: Channels are used by bitfields for setting of channel selection */
+/* (register ADC_CHSELR) and used by number for setting of analog watchdog */
+/* channel (bits AWDCH in register ADC_CFGR1). */
+/* Channels are defined with decimal numbers and converted them to bitfields */
+/* when needed. */
+#define ADC_CHANNEL_0 ((uint32_t) 0x00000000)
+#define ADC_CHANNEL_1 ((uint32_t) 0x00000001)
+#define ADC_CHANNEL_2 ((uint32_t) 0x00000002)
+#define ADC_CHANNEL_3 ((uint32_t) 0x00000003)
+#define ADC_CHANNEL_4 ((uint32_t) 0x00000004)
+#define ADC_CHANNEL_5 ((uint32_t) 0x00000005)
+#define ADC_CHANNEL_6 ((uint32_t) 0x00000006)
+#define ADC_CHANNEL_7 ((uint32_t) 0x00000007)
+#define ADC_CHANNEL_8 ((uint32_t) 0x00000008)
+#define ADC_CHANNEL_9 ((uint32_t) 0x00000009)
+#define ADC_CHANNEL_10 ((uint32_t) 0x0000000A)
+#define ADC_CHANNEL_11 ((uint32_t) 0x0000000B)
+#define ADC_CHANNEL_12 ((uint32_t) 0x0000000C)
+#define ADC_CHANNEL_13 ((uint32_t) 0x0000000D)
+#define ADC_CHANNEL_14 ((uint32_t) 0x0000000E)
+#define ADC_CHANNEL_15 ((uint32_t) 0x0000000F)
+#define ADC_CHANNEL_16 ((uint32_t) 0x00000010)
+#define ADC_CHANNEL_17 ((uint32_t) 0x00000011)
+#define ADC_CHANNEL_18 ((uint32_t) 0x00000012)
+
+#define ADC_CHANNEL_TEMPSENSOR ADC_CHANNEL_16
+#define ADC_CHANNEL_VREFINT ADC_CHANNEL_17
+#define ADC_CHANNEL_VBAT ADC_CHANNEL_18
+
+#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) == ADC_CHANNEL_0) || \
+ ((CHANNEL) == ADC_CHANNEL_1) || \
+ ((CHANNEL) == ADC_CHANNEL_2) || \
+ ((CHANNEL) == ADC_CHANNEL_3) || \
+ ((CHANNEL) == ADC_CHANNEL_4) || \
+ ((CHANNEL) == ADC_CHANNEL_5) || \
+ ((CHANNEL) == ADC_CHANNEL_6) || \
+ ((CHANNEL) == ADC_CHANNEL_7) || \
+ ((CHANNEL) == ADC_CHANNEL_8) || \
+ ((CHANNEL) == ADC_CHANNEL_9) || \
+ ((CHANNEL) == ADC_CHANNEL_10) || \
+ ((CHANNEL) == ADC_CHANNEL_11) || \
+ ((CHANNEL) == ADC_CHANNEL_12) || \
+ ((CHANNEL) == ADC_CHANNEL_13) || \
+ ((CHANNEL) == ADC_CHANNEL_14) || \
+ ((CHANNEL) == ADC_CHANNEL_15) || \
+ ((CHANNEL) == ADC_CHANNEL_TEMPSENSOR) || \
+ ((CHANNEL) == ADC_CHANNEL_VREFINT) || \
+ ((CHANNEL) == ADC_CHANNEL_VBAT) )
+/**
+ * @}
+ */
+
+/** @defgroup ADC_rank ADC rank
+ * @{
+ */
+#define ADC_RANK_CHANNEL_NUMBER ((uint32_t)0x00001000) /*!< Enable the rank of the selected channels. Rank is defined by each channel number (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...) */
+#define ADC_RANK_NONE ((uint32_t)0x00001001) /*!< Disable the selected rank (selected channel) from sequencer */
+
+#define IS_ADC_RANK(WATCHDOG) (((WATCHDOG) == ADC_RANK_CHANNEL_NUMBER) || \
+ ((WATCHDOG) == ADC_RANK_NONE) )
+/**
+ * @}
+ */
+
+/** @defgroup ADC_sampling_times ADC sampling times
+ * @{
+ */
+#define ADC_SAMPLETIME_1CYCLE_5 ((uint32_t)0x00000000) /*!< Sampling time 1.5 ADC clock cycle */
+#define ADC_SAMPLETIME_7CYCLES_5 ((uint32_t) ADC_SMPR_SMP_0) /*!< Sampling time 7.5 ADC clock cycles */
+#define ADC_SAMPLETIME_13CYCLES_5 ((uint32_t) ADC_SMPR_SMP_1) /*!< Sampling time 13.5 ADC clock cycles */
+#define ADC_SAMPLETIME_28CYCLES_5 ((uint32_t)(ADC_SMPR_SMP_1 | ADC_SMPR_SMP_0)) /*!< Sampling time 28.5 ADC clock cycles */
+#define ADC_SAMPLETIME_41CYCLES_5 ((uint32_t) ADC_SMPR_SMP_2) /*!< Sampling time 41.5 ADC clock cycles */
+#define ADC_SAMPLETIME_55CYCLES_5 ((uint32_t)(ADC_SMPR_SMP_2 | ADC_SMPR_SMP_0)) /*!< Sampling time 55.5 ADC clock cycles */
+#define ADC_SAMPLETIME_71CYCLES_5 ((uint32_t)(ADC_SMPR_SMP_2 | ADC_SMPR_SMP_1)) /*!< Sampling time 71.5 ADC clock cycles */
+#define ADC_SAMPLETIME_239CYCLES_5 ((uint32_t) ADC_SMPR_SMP) /*!< Sampling time 239.5 ADC clock cycles */
+
+#define IS_ADC_SAMPLE_TIME(TIME) (((TIME) == ADC_SAMPLETIME_1CYCLE_5) || \
+ ((TIME) == ADC_SAMPLETIME_7CYCLES_5) || \
+ ((TIME) == ADC_SAMPLETIME_13CYCLES_5) || \
+ ((TIME) == ADC_SAMPLETIME_28CYCLES_5) || \
+ ((TIME) == ADC_SAMPLETIME_41CYCLES_5) || \
+ ((TIME) == ADC_SAMPLETIME_55CYCLES_5) || \
+ ((TIME) == ADC_SAMPLETIME_71CYCLES_5) || \
+ ((TIME) == ADC_SAMPLETIME_239CYCLES_5) )
+/**
+ * @}
+ */
+
+/** @defgroup ADC_analog_watchdog_mode ADC analog watchdog mode
+ * @{
+ */
+#define ADC_ANALOGWATCHDOG_NONE ((uint32_t) 0x00000000)
+#define ADC_ANALOGWATCHDOG_SINGLE_REG ((uint32_t)(ADC_CFGR1_AWDSGL | ADC_CFGR1_AWDEN))
+#define ADC_ANALOGWATCHDOG_ALL_REG ((uint32_t) ADC_CFGR1_AWDEN)
+
+
+#define IS_ADC_ANALOG_WATCHDOG_MODE(WATCHDOG) (((WATCHDOG) == ADC_ANALOGWATCHDOG_NONE) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_REG) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_REG) )
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Event_type ADC Event type
+ * @{
+ */
+#define AWD_EVENT ((uint32_t)ADC_FLAG_AWD) /*!< ADC Analog watchdog 1 event */
+#define OVR_EVENT ((uint32_t)ADC_FLAG_OVR) /*!< ADC overrun event */
+
+#define IS_ADC_EVENT_TYPE(EVENT) (((EVENT) == AWD_EVENT) || \
+ ((EVENT) == OVR_EVENT) )
+/**
+ * @}
+ */
+
+/** @defgroup ADC_interrupts_definition ADC interrupts definition
+ * @{
+ */
+#define ADC_IT_AWD ADC_IER_AWDIE /*!< ADC Analog watchdog interrupt source */
+#define ADC_IT_OVR ADC_IER_OVRIE /*!< ADC overrun interrupt source */
+#define ADC_IT_EOS ADC_IER_EOSEQIE /*!< ADC End of Regular sequence of Conversions interrupt source */
+#define ADC_IT_EOC ADC_IER_EOCIE /*!< ADC End of Regular Conversion interrupt source */
+#define ADC_IT_EOSMP ADC_IER_EOSMPIE /*!< ADC End of Sampling interrupt source */
+#define ADC_IT_RDY ADC_IER_ADRDYIE /*!< ADC Ready interrupt source */
+/**
+ * @}
+ */
+
+/** @defgroup ADC_flags_definition ADC flags definition
+ * @{
+ */
+#define ADC_FLAG_AWD ADC_ISR_AWD /*!< ADC Analog watchdog flag */
+#define ADC_FLAG_OVR ADC_ISR_OVR /*!< ADC overrun flag */
+#define ADC_FLAG_EOS ADC_ISR_EOSEQ /*!< ADC End of Regular sequence of Conversions flag */
+#define ADC_FLAG_EOC ADC_ISR_EOC /*!< ADC End of Regular Conversion flag */
+#define ADC_FLAG_EOSMP ADC_ISR_EOSMP /*!< ADC End of Sampling flag */
+#define ADC_FLAG_RDY ADC_ISR_ADRDY /*!< ADC Ready flag */
+
+#define ADC_FLAG_ALL (ADC_FLAG_AWD | ADC_FLAG_OVR | ADC_FLAG_EOS | ADC_FLAG_EOC | \
+ ADC_FLAG_EOSMP | ADC_FLAG_RDY )
+
+/* Combination of all post-conversion flags bits: EOC/EOS, OVR, AWD */
+#define ADC_FLAG_POSTCONV_ALL (ADC_FLAG_AWD | ADC_FLAG_OVR | ADC_FLAG_EOS | ADC_FLAG_EOC)
+/**
+ * @}
+ */
+
+/** @defgroup ADC_range_verification ADC range verification
+ * in function of ADC resolution selected (12, 10, 8 or 6 bits)
+ * @{
+ */
+#define IS_ADC_RANGE(RESOLUTION, ADC_VALUE) \
+ ((((RESOLUTION) == ADC_RESOLUTION12b) && ((ADC_VALUE) <= ((uint32_t)0x0FFF))) || \
+ (((RESOLUTION) == ADC_RESOLUTION10b) && ((ADC_VALUE) <= ((uint32_t)0x03FF))) || \
+ (((RESOLUTION) == ADC_RESOLUTION8b) && ((ADC_VALUE) <= ((uint32_t)0x00FF))) || \
+ (((RESOLUTION) == ADC_RESOLUTION6b) && ((ADC_VALUE) <= ((uint32_t)0x003F))) )
+/**
+ * @}
+ */
+
+/** @defgroup ADC_regular_rank_verification ADC regular rank verification
+ * @{
+ */
+#define IS_ADC_REGULAR_RANK(RANK) (((RANK) >= ((uint32_t)1)) && ((RANK) <= ((uint32_t)16)))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @defgroup ADC_Exported_Macros ADC Exported Macros
+ * @{
+ */
+/** @brief Reset ADC handle state
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#define __HAL_ADC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_ADC_STATE_RESET)
+
+/* Macro for internal HAL driver usage, and possibly can be used into code of */
+/* final user. */
+
+/**
+ * @brief Verification of ADC state: enabled or disabled
+ * @param __HANDLE__: ADC handle
+ * @retval SET (ADC enabled) or RESET (ADC disabled)
+ */
+/* Note: If low power mode AutoPowerOff is enabled, power-on/off phases are */
+/* performed automatically by hardware and flag ADC_FLAG_RDY is not */
+/* set. */
+#define __HAL_ADC_IS_ENABLED(__HANDLE__) \
+ (( ((((__HANDLE__)->Instance->CR) & (ADC_CR_ADEN | ADC_CR_ADDIS)) == ADC_CR_ADEN) && \
+ (((((__HANDLE__)->Instance->ISR) & ADC_FLAG_RDY) == ADC_FLAG_RDY) || \
+ ((((__HANDLE__)->Instance->CFGR1) & ADC_CFGR1_AUTOFF) == ADC_CFGR1_AUTOFF) ) \
+ ) ? SET : RESET)
+
+/**
+ * @brief Test if conversion trigger of regular group is software start
+ * or external trigger.
+ * @param __HANDLE__: ADC handle
+ * @retval SET (software start) or RESET (external trigger)
+ */
+#define __HAL_ADC_IS_SOFTWARE_START_REGULAR(__HANDLE__) \
+ (((__HANDLE__)->Instance->CFGR1 & ADC_CFGR1_EXTEN) == RESET)
+
+/**
+ * @brief Check if no conversion on going on regular group
+ * @param __HANDLE__: ADC handle
+ * @retval SET (conversion is on going) or RESET (no conversion is on going)
+ */
+#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR(__HANDLE__) \
+ (( (((__HANDLE__)->Instance->CR) & ADC_CR_ADSTART) == RESET \
+ ) ? RESET : SET)
+
+/**
+ * @brief Returns resolution bits in CFGR1 register: RES[1:0].
+ * Returned value is among parameters to @ref ADC_Resolution.
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#define __HAL_ADC_GET_RESOLUTION(__HANDLE__) (((__HANDLE__)->Instance->CFGR1) & ADC_CFGR1_RES)
+
+/**
+ * @brief Returns ADC sample time bits in SMPR register: SMP[2:0].
+ * Returned value is among parameters to @ref ADC_Resolution.
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#define __HAL_ADC_GET_SAMPLINGTIME(__HANDLE__) (((__HANDLE__)->Instance->SMPR) & ADC_SMPR_SMP)
+
+/** @brief Checks if the specified ADC interrupt source is enabled or disabled.
+ * @param __HANDLE__: ADC handle
+ * @param __INTERRUPT__: ADC interrupt source to check
+ * @retval State ofinterruption (SET or RESET)
+ */
+#define __HAL_ADC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) \
+ (( ((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__) \
+ )? SET : RESET \
+ )
+
+/**
+ * @brief Enable the ADC end of conversion interrupt.
+ * @param __HANDLE__: ADC handle
+ * @param __INTERRUPT__: ADC Interrupt
+ * @retval None
+ */
+#define __HAL_ADC_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the ADC end of conversion interrupt.
+ * @param __HANDLE__: ADC handle
+ * @param __INTERRUPT__: ADC Interrupt
+ * @retval None
+ */
+#define __HAL_ADC_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) &= ~(__INTERRUPT__))
+
+/**
+ * @brief Get the selected ADC's flag status.
+ * @param __HANDLE__: ADC handle
+ * @param __FLAG__: ADC flag
+ * @retval None
+ */
+#define __HAL_ADC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->ISR) & (__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clear the ADC's pending flags
+ * @param __HANDLE__: ADC handle
+ * @param __FLAG__: ADC flag
+ * @retval None
+ */
+/* Note: bit cleared bit by writing 1 (writing 0 has no effect on any bit of register ISR) */
+#define __HAL_ADC_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR) = (__FLAG__))
+
+/**
+ * @brief Clear ADC error code (set it to error code: "no error")
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#define __HAL_ADC_CLEAR_ERRORCODE(__HANDLE__) ((__HANDLE__)->ErrorCode = HAL_ADC_ERROR_NONE)
+
+
+/**
+ * @brief Configure the channel number into channel selection register
+ * @param _CHANNEL_: ADC Channel
+ * @retval None
+ */
+/* This function converts ADC channels from numbers (see defgroup ADC_channels)
+ to bitfields, to get the equivalence of CMSIS channels:
+ ADC_CHANNEL_0 ((uint32_t) ADC_CHSELR_CHSEL0)
+ ADC_CHANNEL_1 ((uint32_t) ADC_CHSELR_CHSEL1)
+ ADC_CHANNEL_2 ((uint32_t) ADC_CHSELR_CHSEL2)
+ ADC_CHANNEL_3 ((uint32_t) ADC_CHSELR_CHSEL3)
+ ADC_CHANNEL_4 ((uint32_t) ADC_CHSELR_CHSEL4)
+ ADC_CHANNEL_5 ((uint32_t) ADC_CHSELR_CHSEL5)
+ ADC_CHANNEL_6 ((uint32_t) ADC_CHSELR_CHSEL6)
+ ADC_CHANNEL_7 ((uint32_t) ADC_CHSELR_CHSEL7)
+ ADC_CHANNEL_8 ((uint32_t) ADC_CHSELR_CHSEL8)
+ ADC_CHANNEL_9 ((uint32_t) ADC_CHSELR_CHSEL9)
+ ADC_CHANNEL_10 ((uint32_t) ADC_CHSELR_CHSEL10)
+ ADC_CHANNEL_11 ((uint32_t) ADC_CHSELR_CHSEL11)
+ ADC_CHANNEL_12 ((uint32_t) ADC_CHSELR_CHSEL12)
+ ADC_CHANNEL_13 ((uint32_t) ADC_CHSELR_CHSEL13)
+ ADC_CHANNEL_14 ((uint32_t) ADC_CHSELR_CHSEL14)
+ ADC_CHANNEL_15 ((uint32_t) ADC_CHSELR_CHSEL15)
+ ADC_CHANNEL_16 ((uint32_t) ADC_CHSELR_CHSEL16)
+ ADC_CHANNEL_17 ((uint32_t) ADC_CHSELR_CHSEL17)
+ ADC_CHANNEL_18 ((uint32_t) ADC_CHSELR_CHSEL18)
+*/
+#define __HAL_ADC_CHSELR_CHANNEL(_CHANNEL_) ( 1U << (_CHANNEL_))
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Exported_Macro_internal_HAL_driver ADC Exported Macro internal HAL driver
+ * @{
+ */
+/* Macro reserved for internal HAL driver usage, not intended to be used in */
+/* code of final user. */
+
+/**
+ * @brief Set the Analog Watchdog 1 channel.
+ * @param _CHANNEL_: channel to be monitored by Analog Watchdog 1.
+ * @retval None
+ */
+#define __HAL_ADC_CFGR_AWDCH(_CHANNEL_) ((_CHANNEL_) << 26)
+
+/**
+ * @brief Enable ADC discontinuous conversion mode for regular group
+ * @param _REG_DISCONTINUOUS_MODE_: Regular discontinuous mode.
+ * @retval None
+ */
+#define __HAL_ADC_CFGR1_REG_DISCCONTINUOUS(_REG_DISCONTINUOUS_MODE_) ((_REG_DISCONTINUOUS_MODE_) << 16)
+
+/**
+ * @brief Enable the ADC auto off mode.
+ * @param _AUTOOFF_: Auto off bit enable or disable.
+ * @retval None
+ */
+#define __HAL_ADC_CFGR1_AUTOOFF(_AUTOOFF_) ((_AUTOOFF_) << 15)
+
+/**
+ * @brief Enable the ADC auto delay mode.
+ * @param _AUTOWAIT_: Auto delay bit enable or disable.
+ * @retval None
+ */
+#define __HAL_ADC_CFGR1_AUTOWAIT(_AUTOWAIT_) ((_AUTOWAIT_) << 14)
+
+/**
+ * @brief Enable ADC continuous conversion mode.
+ * @param _CONTINUOUS_MODE_: Continuous mode.
+ * @retval None
+ */
+#define __HAL_ADC_CFGR1_CONTINUOUS(_CONTINUOUS_MODE_) ((_CONTINUOUS_MODE_) << 13)
+
+/**
+ * @brief Enable ADC overrun mode.
+ * @param _OVERRUN_MODE_: Overrun mode.
+ * @retval Overun bit setting to be programmed into CFGR register
+ */
+/* Note: Bit ADC_CFGR1_OVRMOD not used directly in constant */
+/* "OVR_DATA_OVERWRITTEN" to have this case defined to 0x00, to set it as the */
+/* default case to be compliant with other STM32 devices. */
+#define __HAL_ADC_CFGR1_OVERRUN(_OVERRUN_MODE_) \
+ ( ( (_OVERRUN_MODE_) != (OVR_DATA_PRESERVED) \
+ )? (ADC_CFGR1_OVRMOD) : (0x00000000) \
+ )
+
+/**
+ * @brief Enable ADC scan mode to convert multiple ranks with sequencer.
+ * @param _SCAN_MODE_: Scan conversion mode.
+ * @retval None
+ */
+#define __HAL_ADC_CFGR1_SCANDIR(_SCAN_MODE_) \
+ ( ( (_SCAN_MODE_) == (ADC_SCAN_DIRECTION_BACKWARD) \
+ )? (ADC_CFGR1_SCANDIR) : (0x00000000) \
+ )
+
+/**
+ * @brief Enable the ADC DMA continuous request.
+ * @param _DMACONTREQ_MODE_: DMA continuous request mode.
+ * @retval None
+ */
+#define __HAL_ADC_CFGR1_DMACONTREQ(_DMACONTREQ_MODE_) ((_DMACONTREQ_MODE_) << 1)
+
+/**
+ * @brief Configure the analog watchdog high threshold into register TR.
+ * @param _Threshold_: Threshold value
+ * @retval None
+ */
+#define __HAL_ADC_TRX_HIGHTHRESHOLD(_Threshold_) ((_Threshold_) << 16)
+
+/**
+ * @brief Enable the ADC peripheral
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#define __HAL_ADC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= ADC_CR_ADEN)
+
+/**
+ * @brief Verification of hardware constraints before ADC can be enabled
+ * @param __HANDLE__: ADC handle
+ * @retval SET (ADC can be enabled) or RESET (ADC cannot be enabled)
+ */
+#define __HAL_ADC_ENABLING_CONDITIONS(__HANDLE__) \
+ (( ( ((__HANDLE__)->Instance->CR) & \
+ (ADC_CR_ADCAL | ADC_CR_ADSTP | \
+ ADC_CR_ADSTART | ADC_CR_ADDIS | ADC_CR_ADEN ) \
+ ) == RESET \
+ ) ? SET : RESET)
+
+/**
+ * @brief Disable the ADC peripheral
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#define __HAL_ADC_DISABLE(__HANDLE__) \
+ do{ \
+ (__HANDLE__)->Instance->CR |= ADC_CR_ADDIS; \
+ __HAL_ADC_CLEAR_FLAG((__HANDLE__), (ADC_FLAG_EOSMP | ADC_FLAG_RDY)); \
+ } while(0)
+
+/**
+ * @brief Verification of hardware constraints before ADC can be disabled
+ * @param __HANDLE__: ADC handle
+ * @retval SET (ADC can be disabled) or RESET (ADC cannot be disabled)
+ */
+#define __HAL_ADC_DISABLING_CONDITIONS(__HANDLE__) \
+ (( ( ((__HANDLE__)->Instance->CR) & \
+ (ADC_CR_ADSTART | ADC_CR_ADEN)) == ADC_CR_ADEN \
+ ) ? SET : RESET)
+
+/**
+ * @brief Shift the AWD threshold in function of the selected ADC resolution.
+ * Thresholds have to be left-aligned on bit 11, the LSB (right bits) are set to 0.
+ * If resolution 12 bits, no shift.
+ * If resolution 10 bits, shift of 2 ranks on the left.
+ * If resolution 8 bits, shift of 4 ranks on the left.
+ * If resolution 6 bits, shift of 6 ranks on the left.
+ * therefore, shift = (12 - resolution) = 12 - (12- (((RES[1:0]) >> 3)*2))
+ * @param __HANDLE__: ADC handle
+ * @param _Threshold_: Value to be shifted
+ * @retval None
+ */
+#define __HAL_ADC_AWD1THRESHOLD_SHIFT_RESOLUTION(__HANDLE__, _Threshold_) \
+ ((_Threshold_) << ((((__HANDLE__)->Instance->CFGR1 & ADC_CFGR1_RES) >> 3)*2))
+
+/**
+ * @}
+ */
+
+/* Include ADC HAL Extension module */
+#include "stm32f0xx_hal_adc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup ADC_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup ADC_Exported_Functions_Group1
+ * @{
+ */
+
+
+/* Initialization and de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef *hadc);
+void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc);
+void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc);
+/**
+ * @}
+ */
+
+/* IO operation functions *****************************************************/
+
+/** @addtogroup ADC_Exported_Functions_Group2
+ * @{
+ */
+
+
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout);
+HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef* hadc, uint32_t EventType, uint32_t Timeout);
+
+/* Non-blocking mode: Interruption */
+HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef* hadc);
+
+/* Non-blocking mode: DMA */
+HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length);
+HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef* hadc);
+
+/* ADC retrieve conversion value intended to be used with polling or interruption */
+uint32_t HAL_ADC_GetValue(ADC_HandleTypeDef* hadc);
+
+/* ADC IRQHandler and Callbacks used in non-blocking modes (Interruption and DMA) */
+void HAL_ADC_IRQHandler(ADC_HandleTypeDef* hadc);
+void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef* hadc);
+void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef* hadc);
+void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef* hadc);
+void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc);
+/**
+ * @}
+ */
+
+
+/* Peripheral Control functions ***********************************************/
+/** @addtogroup ADC_Exported_Functions_Group3
+ * @{
+ */
+HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef* hadc, ADC_ChannelConfTypeDef* sConfig);
+HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef* hadc, ADC_AnalogWDGConfTypeDef* AnalogWDGConfig);
+/**
+ * @}
+ */
+
+
+/* Peripheral State functions *************************************************/
+/** @addtogroup ADC_Exported_Functions_Group4
+ * @{
+ */
+HAL_ADC_StateTypeDef HAL_ADC_GetState(ADC_HandleTypeDef* hadc);
+uint32_t HAL_ADC_GetError(ADC_HandleTypeDef *hadc);
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F0xx_HAL_ADC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/include/stm32f0xx_hal_adc_ex.h b/f0/include/stm32f0xx_hal_adc_ex.h
new file mode 100755
index 0000000000000000000000000000000000000000..0d609addcce9a9425db5a8bfebe5c5b98bb17704
--- /dev/null
+++ b/f0/include/stm32f0xx_hal_adc_ex.h
@@ -0,0 +1,98 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_adc_ex.h
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief Header file of ADC HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_ADC_EX_H
+#define __STM32F0xx_HAL_ADC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup ADCEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup ADCEx_Exported_Functions
+ * @{
+ */
+
+/* IO operation functions *****************************************************/
+/** @addtogroup ADCEx_Exported_Functions_Group1
+ * @{
+ */
+
+/* ADC calibration */
+HAL_StatusTypeDef HAL_ADCEx_Calibration_Start(ADC_HandleTypeDef* hadc);
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_ADC_EX_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/include/stm32f0xx_hal_can.h b/f0/include/stm32f0xx_hal_can.h
new file mode 100755
index 0000000000000000000000000000000000000000..6f712e7d97dcb335df1b4a3752a9681f5a86f1fd
--- /dev/null
+++ b/f0/include/stm32f0xx_hal_can.h
@@ -0,0 +1,810 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_can.h
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief Header file of CAN HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_CAN_H
+#define __STM32F0xx_HAL_CAN_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F072xB) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CAN CAN HAL Module Driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup CAN_Exported_Types CAN Exported Types
+ * @{
+ */
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_CAN_STATE_RESET = 0x00, /*!< CAN not yet initialized or disabled */
+ HAL_CAN_STATE_READY = 0x01, /*!< CAN initialized and ready for use */
+ HAL_CAN_STATE_BUSY = 0x02, /*!< CAN process is ongoing */
+ HAL_CAN_STATE_BUSY_TX = 0x12, /*!< CAN process is ongoing */
+ HAL_CAN_STATE_BUSY_RX = 0x22, /*!< CAN process is ongoing */
+ HAL_CAN_STATE_BUSY_TX_RX = 0x32, /*!< CAN process is ongoing */
+ HAL_CAN_STATE_TIMEOUT = 0x03, /*!< CAN in Timeout state */
+ HAL_CAN_STATE_ERROR = 0x04 /*!< CAN error state */
+
+}HAL_CAN_StateTypeDef;
+
+/**
+ * @brief CAN init structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Specifies the length of a time quantum.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 1024. */
+
+ uint32_t Mode; /*!< Specifies the CAN operating mode.
+ This parameter can be a value of @ref CAN_operating_mode */
+
+ uint32_t SJW; /*!< Specifies the maximum number of time quanta
+ the CAN hardware is allowed to lengthen or
+ shorten a bit to perform resynchronization.
+ This parameter can be a value of @ref CAN_synchronisation_jump_width */
+
+ uint32_t BS1; /*!< Specifies the number of time quanta in Bit Segment 1.
+ This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_1 */
+
+ uint32_t BS2; /*!< Specifies the number of time quanta in Bit Segment 2.
+ This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_2 */
+
+ uint32_t TTCM; /*!< Enable or disable the time triggered communication mode.
+ This parameter can be set to ENABLE or DISABLE. */
+
+ uint32_t ABOM; /*!< Enable or disable the automatic bus-off management.
+ This parameter can be set to ENABLE or DISABLE. */
+
+ uint32_t AWUM; /*!< Enable or disable the automatic wake-up mode.
+ This parameter can be set to ENABLE or DISABLE. */
+
+ uint32_t NART; /*!< Enable or disable the non-automatic retransmission mode.
+ This parameter can be set to ENABLE or DISABLE. */
+
+ uint32_t RFLM; /*!< Enable or disable the Receive FIFO Locked mode.
+ This parameter can be set to ENABLE or DISABLE. */
+
+ uint32_t TXFP; /*!< Enable or disable the transmit FIFO priority.
+ This parameter can be set to ENABLE or DISABLE. */
+}CAN_InitTypeDef;
+
+/**
+ * @brief CAN filter configuration structure definition
+ */
+typedef struct
+{
+ uint32_t FilterIdHigh; /*!< Specifies the filter identification number (MSBs for a 32-bit
+ configuration, first one for a 16-bit configuration).
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+ uint32_t FilterIdLow; /*!< Specifies the filter identification number (LSBs for a 32-bit
+ configuration, second one for a 16-bit configuration).
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+ uint32_t FilterMaskIdHigh; /*!< Specifies the filter mask number or identification number,
+ according to the mode (MSBs for a 32-bit configuration,
+ first one for a 16-bit configuration).
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+ uint32_t FilterMaskIdLow; /*!< Specifies the filter mask number or identification number,
+ according to the mode (LSBs for a 32-bit configuration,
+ second one for a 16-bit configuration).
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+ uint32_t FilterFIFOAssignment; /*!< Specifies the FIFO (0 or 1) which will be assigned to the filter.
+ This parameter can be a value of @ref CAN_filter_FIFO */
+
+ uint32_t FilterNumber; /*!< Specifies the filter which will be initialized.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 27. */
+
+ uint32_t FilterMode; /*!< Specifies the filter mode to be initialized.
+ This parameter can be a value of @ref CAN_filter_mode */
+
+ uint32_t FilterScale; /*!< Specifies the filter scale.
+ This parameter can be a value of @ref CAN_filter_scale */
+
+ uint32_t FilterActivation; /*!< Enable or disable the filter.
+ This parameter can be set to ENABLE or DISABLE. */
+
+ uint32_t BankNumber; /*!< Select the start slave bank filter
+ This parameter must be a number between Min_Data = 0 and Max_Data = 28. */
+
+}CAN_FilterConfTypeDef;
+
+/**
+ * @brief CAN Tx message structure definition
+ */
+typedef struct
+{
+ uint32_t StdId; /*!< Specifies the standard identifier.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF. */
+
+ uint32_t ExtId; /*!< Specifies the extended identifier.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF. */
+
+ uint32_t IDE; /*!< Specifies the type of identifier for the message that will be transmitted.
+ This parameter can be a value of @ref CAN_identifier_type */
+
+ uint32_t RTR; /*!< Specifies the type of frame for the message that will be transmitted.
+ This parameter can be a value of @ref CAN_remote_transmission_request */
+
+ uint32_t DLC; /*!< Specifies the length of the frame that will be transmitted.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 8. */
+
+ uint32_t Data[8]; /*!< Contains the data to be transmitted.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF. */
+
+}CanTxMsgTypeDef;
+
+/**
+ * @brief CAN Rx message structure definition
+ */
+typedef struct
+{
+ uint32_t StdId; /*!< Specifies the standard identifier.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF. */
+
+ uint32_t ExtId; /*!< Specifies the extended identifier.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF. */
+
+ uint32_t IDE; /*!< Specifies the type of identifier for the message that will be received.
+ This parameter can be a value of @ref CAN_identifier_type */
+
+ uint32_t RTR; /*!< Specifies the type of frame for the received message.
+ This parameter can be a value of @ref CAN_remote_transmission_request */
+
+ uint32_t DLC; /*!< Specifies the length of the frame that will be received.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 8. */
+
+ uint32_t Data[8]; /*!< Contains the data to be received.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF. */
+
+ uint32_t FMI; /*!< Specifies the index of the filter the message stored in the mailbox passes through.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF. */
+
+ uint32_t FIFONumber; /*!< Specifies the receive FIFO number.
+ This parameter can be CAN_FIFO0 or CAN_FIFO1 */
+
+}CanRxMsgTypeDef;
+
+/**
+ * @brief CAN handle Structure definition
+ */
+typedef struct
+{
+ CAN_TypeDef *Instance; /*!< Register base address */
+
+ CAN_InitTypeDef Init; /*!< CAN required parameters */
+
+ CanTxMsgTypeDef* pTxMsg; /*!< Pointer to transmit structure */
+
+ CanRxMsgTypeDef* pRxMsg; /*!< Pointer to reception structure */
+
+ HAL_LockTypeDef Lock; /*!< CAN locking object */
+
+ __IO HAL_CAN_StateTypeDef State; /*!< CAN communication state */
+
+ __IO uint32_t ErrorCode; /*!< CAN Error code
+ This parameter can be a value of @ref CAN_Error */
+
+}CAN_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup CAN_Exported_Constants CAN Exported Constants
+ * @{
+ */
+
+/** @defgroup CAN_Error CAN Error
+ * @{
+ */
+#define HAL_CAN_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_CAN_ERROR_EWG ((uint32_t)0x00000001) /*!< EWG error */
+#define HAL_CAN_ERROR_EPV ((uint32_t)0x00000002) /*!< EPV error */
+#define HAL_CAN_ERROR_BOF ((uint32_t)0x00000004) /*!< BOF error */
+#define HAL_CAN_ERROR_STF ((uint32_t)0x00000008) /*!< Stuff error */
+#define HAL_CAN_ERROR_FOR ((uint32_t)0x00000010) /*!< Form error */
+#define HAL_CAN_ERROR_ACK ((uint32_t)0x00000020) /*!< Acknowledgment error */
+#define HAL_CAN_ERROR_BR ((uint32_t)0x00000040) /*!< Bit recessive */
+#define HAL_CAN_ERROR_BD ((uint32_t)0x00000080) /*!< LEC dominant */
+#define HAL_CAN_ERROR_CRC ((uint32_t)0x00000100) /*!< LEC transfer error */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_InitStatus CAN InitStatus
+ * @{
+ */
+#define CAN_INITSTATUS_FAILED ((uint32_t)0x00000000) /*!< CAN initialization failed */
+#define CAN_INITSTATUS_SUCCESS ((uint32_t)0x00000001) /*!< CAN initialization OK */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_operating_mode CAN operating mode
+ * @{
+ */
+#define CAN_MODE_NORMAL ((uint32_t)0x00000000) /*!< Normal mode */
+#define CAN_MODE_LOOPBACK ((uint32_t)CAN_BTR_LBKM) /*!< Loopback mode */
+#define CAN_MODE_SILENT ((uint32_t)CAN_BTR_SILM) /*!< Silent mode */
+#define CAN_MODE_SILENT_LOOPBACK ((uint32_t)(CAN_BTR_LBKM | CAN_BTR_SILM)) /*!< Loopback combined with silent mode */
+
+#define IS_CAN_MODE(MODE) (((MODE) == CAN_MODE_NORMAL) || \
+ ((MODE) == CAN_MODE_LOOPBACK)|| \
+ ((MODE) == CAN_MODE_SILENT) || \
+ ((MODE) == CAN_MODE_SILENT_LOOPBACK))
+/**
+ * @}
+ */
+
+
+/** @defgroup CAN_synchronisation_jump_width CAN synchronisation jump width
+ * @{
+ */
+#define CAN_SJW_1TQ ((uint32_t)0x00000000) /*!< 1 time quantum */
+#define CAN_SJW_2TQ ((uint32_t)CAN_BTR_SJW_0) /*!< 2 time quantum */
+#define CAN_SJW_3TQ ((uint32_t)CAN_BTR_SJW_1) /*!< 3 time quantum */
+#define CAN_SJW_4TQ ((uint32_t)CAN_BTR_SJW) /*!< 4 time quantum */
+
+#define IS_CAN_SJW(SJW) (((SJW) == CAN_SJW_1TQ) || ((SJW) == CAN_SJW_2TQ)|| \
+ ((SJW) == CAN_SJW_3TQ) || ((SJW) == CAN_SJW_4TQ))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_time_quantum_in_bit_segment_1 CAN time quantum in bit segment 1
+ * @{
+ */
+#define CAN_BS1_1TQ ((uint32_t)0x00000000) /*!< 1 time quantum */
+#define CAN_BS1_2TQ ((uint32_t)CAN_BTR_TS1_0) /*!< 2 time quantum */
+#define CAN_BS1_3TQ ((uint32_t)CAN_BTR_TS1_1) /*!< 3 time quantum */
+#define CAN_BS1_4TQ ((uint32_t)(CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 4 time quantum */
+#define CAN_BS1_5TQ ((uint32_t)CAN_BTR_TS1_2) /*!< 5 time quantum */
+#define CAN_BS1_6TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_0)) /*!< 6 time quantum */
+#define CAN_BS1_7TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_1)) /*!< 7 time quantum */
+#define CAN_BS1_8TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 8 time quantum */
+#define CAN_BS1_9TQ ((uint32_t)CAN_BTR_TS1_3) /*!< 9 time quantum */
+#define CAN_BS1_10TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_0)) /*!< 10 time quantum */
+#define CAN_BS1_11TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_1)) /*!< 11 time quantum */
+#define CAN_BS1_12TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 12 time quantum */
+#define CAN_BS1_13TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2)) /*!< 13 time quantum */
+#define CAN_BS1_14TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_0)) /*!< 14 time quantum */
+#define CAN_BS1_15TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_1)) /*!< 15 time quantum */
+#define CAN_BS1_16TQ ((uint32_t)CAN_BTR_TS1) /*!< 16 time quantum */
+
+#define IS_CAN_BS1(BS1) ((BS1) <= CAN_BS1_16TQ)
+/**
+ * @}
+ */
+
+/** @defgroup CAN_time_quantum_in_bit_segment_2 CAN time quantum in bit segment 2
+ * @{
+ */
+#define CAN_BS2_1TQ ((uint32_t)0x00000000) /*!< 1 time quantum */
+#define CAN_BS2_2TQ ((uint32_t)CAN_BTR_TS2_0) /*!< 2 time quantum */
+#define CAN_BS2_3TQ ((uint32_t)CAN_BTR_TS2_1) /*!< 3 time quantum */
+#define CAN_BS2_4TQ ((uint32_t)(CAN_BTR_TS2_1 | CAN_BTR_TS2_0)) /*!< 4 time quantum */
+#define CAN_BS2_5TQ ((uint32_t)CAN_BTR_TS2_2) /*!< 5 time quantum */
+#define CAN_BS2_6TQ ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_0)) /*!< 6 time quantum */
+#define CAN_BS2_7TQ ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_1)) /*!< 7 time quantum */
+#define CAN_BS2_8TQ ((uint32_t)CAN_BTR_TS2) /*!< 8 time quantum */
+
+#define IS_CAN_BS2(BS2) ((BS2) <= CAN_BS2_8TQ)
+/**
+ * @}
+ */
+
+/** @defgroup CAN_clock_prescaler CAN clock prescaler
+ * @{
+ */
+#define IS_CAN_PRESCALER(PRESCALER) (((PRESCALER) >= 1) && ((PRESCALER) <= 1024))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_filter_number CAN filter number
+ * @{
+ */
+#define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 27)
+/**
+ * @}
+ */
+
+/** @defgroup CAN_filter_mode CAN filter mode
+ * @{
+ */
+#define CAN_FILTERMODE_IDMASK ((uint8_t)0x00) /*!< Identifier mask mode */
+#define CAN_FILTERMODE_IDLIST ((uint8_t)0x01) /*!< Identifier list mode */
+
+#define IS_CAN_FILTER_MODE(MODE) (((MODE) == CAN_FILTERMODE_IDMASK) || \
+ ((MODE) == CAN_FILTERMODE_IDLIST))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_filter_scale CAN filter scale
+ * @{
+ */
+#define CAN_FILTERSCALE_16BIT ((uint8_t)0x00) /*!< Two 16-bit filters */
+#define CAN_FILTERSCALE_32BIT ((uint8_t)0x01) /*!< One 32-bit filter */
+
+#define IS_CAN_FILTER_SCALE(SCALE) (((SCALE) == CAN_FILTERSCALE_16BIT) || \
+ ((SCALE) == CAN_FILTERSCALE_32BIT))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_filter_FIFO CAN filter FIFO
+ * @{
+ */
+#define CAN_FILTER_FIFO0 ((uint8_t)0x00) /*!< Filter FIFO 0 assignment for filter x */
+#define CAN_FILTER_FIFO1 ((uint8_t)0x01) /*!< Filter FIFO 1 assignment for filter x */
+
+#define IS_CAN_FILTER_FIFO(FIFO) (((FIFO) == CAN_FILTER_FIFO0) || \
+ ((FIFO) == CAN_FILTER_FIFO1))
+
+/* Legacy defines */
+#define CAN_FilterFIFO0 CAN_FILTER_FIFO0
+#define CAN_FilterFIFO1 CAN_FILTER_FIFO1
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Start_bank_filter_for_slave_CAN CAN Start bank filter for slave CAN
+ * @{
+ */
+#define IS_CAN_BANKNUMBER(BANKNUMBER) ((BANKNUMBER) <= 28)
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Tx CAN Tx
+ * @{
+ */
+#define IS_CAN_TRANSMITMAILBOX(TRANSMITMAILBOX) ((TRANSMITMAILBOX) <= ((uint8_t)0x02))
+#define IS_CAN_STDID(STDID) ((STDID) <= ((uint32_t)0x7FF))
+#define IS_CAN_EXTID(EXTID) ((EXTID) <= ((uint32_t)0x1FFFFFFF))
+#define IS_CAN_DLC(DLC) ((DLC) <= ((uint8_t)0x08))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_identifier_type CAN identifier type
+ * @{
+ */
+#define CAN_ID_STD ((uint32_t)0x00000000) /*!< Standard Id */
+#define CAN_ID_EXT ((uint32_t)0x00000004) /*!< Extended Id */
+#define IS_CAN_IDTYPE(IDTYPE) (((IDTYPE) == CAN_ID_STD) || \
+ ((IDTYPE) == CAN_ID_EXT))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_remote_transmission_request CAN remote transmission request
+ * @{
+ */
+#define CAN_RTR_DATA ((uint32_t)0x00000000) /*!< Data frame */
+#define CAN_RTR_REMOTE ((uint32_t)0x00000002) /*!< Remote frame */
+#define IS_CAN_RTR(RTR) (((RTR) == CAN_RTR_DATA) || ((RTR) == CAN_RTR_REMOTE))
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_transmit_constants CAN transmit constants
+ * @{
+ */
+#define CAN_TXSTATUS_FAILED ((uint8_t)0x00) /*!< CAN transmission failed */
+#define CAN_TXSTATUS_OK ((uint8_t)0x01) /*!< CAN transmission succeeded */
+#define CAN_TXSTATUS_PENDING ((uint8_t)0x02) /*!< CAN transmission pending */
+#define CAN_TXSTATUS_NOMAILBOX ((uint8_t)0x04) /*!< CAN cell did not provide CAN_TxStatus_NoMailBox */
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_receive_FIFO_number_constants CAN receive FIFO number constants
+ * @{
+ */
+#define CAN_FIFO0 ((uint8_t)0x00) /*!< CAN FIFO 0 used to receive */
+#define CAN_FIFO1 ((uint8_t)0x01) /*!< CAN FIFO 1 used to receive */
+
+#define IS_CAN_FIFO(FIFO) (((FIFO) == CAN_FIFO0) || ((FIFO) == CAN_FIFO1))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_flags CAN flags
+ * @{
+ */
+/* If the flag is 0x3XXXXXXX, it means that it can be used with CAN_GetFlagStatus()
+ and CAN_ClearFlag() functions. */
+/* If the flag is 0x1XXXXXXX, it means that it can only be used with
+ CAN_GetFlagStatus() function. */
+
+/* Transmit Flags */
+#define CAN_FLAG_RQCP0 ((uint32_t)0x00000500) /*!< Request MailBox0 flag */
+#define CAN_FLAG_RQCP1 ((uint32_t)0x00000508) /*!< Request MailBox1 flag */
+#define CAN_FLAG_RQCP2 ((uint32_t)0x00000510) /*!< Request MailBox2 flag */
+#define CAN_FLAG_TXOK0 ((uint32_t)0x00000501) /*!< Transmission OK MailBox0 flag */
+#define CAN_FLAG_TXOK1 ((uint32_t)0x00000509) /*!< Transmission OK MailBox1 flag */
+#define CAN_FLAG_TXOK2 ((uint32_t)0x00000511) /*!< Transmission OK MailBox2 flag */
+#define CAN_FLAG_TME0 ((uint32_t)0x0000051A) /*!< Transmit mailbox 0 empty flag */
+#define CAN_FLAG_TME1 ((uint32_t)0x0000051B) /*!< Transmit mailbox 0 empty flag */
+#define CAN_FLAG_TME2 ((uint32_t)0x0000051C) /*!< Transmit mailbox 0 empty flag */
+
+/* Receive Flags */
+#define CAN_FLAG_FF0 ((uint32_t)0x00000203) /*!< FIFO 0 Full flag */
+#define CAN_FLAG_FOV0 ((uint32_t)0x00000204) /*!< FIFO 0 Overrun flag */
+
+#define CAN_FLAG_FF1 ((uint32_t)0x00000403) /*!< FIFO 1 Full flag */
+#define CAN_FLAG_FOV1 ((uint32_t)0x00000404) /*!< FIFO 1 Overrun flag */
+
+/* Operating Mode Flags */
+#define CAN_FLAG_WKU ((uint32_t)0x00000103) /*!< Wake up flag */
+#define CAN_FLAG_SLAK ((uint32_t)0x00000101) /*!< Sleep acknowledge flag */
+#define CAN_FLAG_SLAKI ((uint32_t)0x00000104) /*!< Sleep acknowledge flag */
+/* @note When SLAK interrupt is disabled (SLKIE=0), no polling on SLAKI is possible.
+ In this case the SLAK bit can be polled.*/
+
+/* Error Flags */
+#define CAN_FLAG_EWG ((uint32_t)0x00000300) /*!< Error warning flag */
+#define CAN_FLAG_EPV ((uint32_t)0x00000301) /*!< Error passive flag */
+#define CAN_FLAG_BOF ((uint32_t)0x00000302) /*!< Bus-Off flag */
+/**
+ * @}
+ */
+
+
+/** @defgroup CAN_interrupts CAN interrupts
+ * @{
+ */
+#define CAN_IT_TME ((uint32_t)CAN_IER_TMEIE) /*!< Transmit mailbox empty interrupt */
+
+/* Receive Interrupts */
+#define CAN_IT_FMP0 ((uint32_t)CAN_IER_FMPIE0) /*!< FIFO 0 message pending interrupt */
+#define CAN_IT_FF0 ((uint32_t)CAN_IER_FFIE0) /*!< FIFO 0 full interrupt */
+#define CAN_IT_FOV0 ((uint32_t)CAN_IER_FOVIE0) /*!< FIFO 0 overrun interrupt */
+#define CAN_IT_FMP1 ((uint32_t)CAN_IER_FMPIE1) /*!< FIFO 1 message pending interrupt */
+#define CAN_IT_FF1 ((uint32_t)CAN_IER_FFIE1) /*!< FIFO 1 full interrupt */
+#define CAN_IT_FOV1 ((uint32_t)CAN_IER_FOVIE1) /*!< FIFO 1 overrun interrupt */
+
+/* Operating Mode Interrupts */
+#define CAN_IT_WKU ((uint32_t)CAN_IER_WKUIE) /*!< Wake-up interrupt */
+#define CAN_IT_SLK ((uint32_t)CAN_IER_SLKIE) /*!< Sleep acknowledge interrupt */
+
+/* Error Interrupts */
+#define CAN_IT_EWG ((uint32_t)CAN_IER_EWGIE) /*!< Error warning interrupt */
+#define CAN_IT_EPV ((uint32_t)CAN_IER_EPVIE) /*!< Error passive interrupt */
+#define CAN_IT_BOF ((uint32_t)CAN_IER_BOFIE) /*!< Bus-off interrupt */
+#define CAN_IT_LEC ((uint32_t)CAN_IER_LECIE) /*!< Last error code interrupt */
+#define CAN_IT_ERR ((uint32_t)CAN_IER_ERRIE) /*!< Error Interrupt */
+
+/* Flags named as Interrupts : kept only for FW compatibility */
+#define CAN_IT_RQCP0 CAN_IT_TME
+#define CAN_IT_RQCP1 CAN_IT_TME
+#define CAN_IT_RQCP2 CAN_IT_TME
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Timeouts CAN Timeouts
+* @{
+*/
+
+/* Time out for INAK bit */
+#define INAK_TIMEOUT ((uint32_t)0x00FFFFFF)
+/* Time out for SLAK bit */
+#define SLAK_TIMEOUT ((uint32_t)0x00FFFFFF)
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Mailboxes CAN Mailboxes
+* @{
+*/
+/* Mailboxes definition */
+#define CAN_TXMAILBOX_0 ((uint8_t)0x00)
+#define CAN_TXMAILBOX_1 ((uint8_t)0x01)
+#define CAN_TXMAILBOX_2 ((uint8_t)0x02)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup CAN_Exported_Macros CAN Exported Macros
+ * @{
+ */
+
+/** @brief Reset CAN handle state
+ * @param __HANDLE__: CAN handle.
+ * @retval None
+ */
+#define __HAL_CAN_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CAN_STATE_RESET)
+
+/**
+ * @brief Enable the specified CAN interrupts.
+ * @param __HANDLE__: CAN handle.
+ * @param __INTERRUPT__: CAN Interrupt
+ * @retval None
+ */
+#define __HAL_CAN_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the specified CAN interrupts.
+ * @param __HANDLE__: CAN handle.
+ * @param __INTERRUPT__: CAN Interrupt
+ * @retval None
+ */
+#define __HAL_CAN_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) &= ~(__INTERRUPT__))
+
+/**
+ * @brief Return the number of pending received messages.
+ * @param __HANDLE__: CAN handle.
+ * @param __FIFONUMBER__: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1.
+ * @retval The number of pending message.
+ */
+#define __HAL_CAN_MSG_PENDING(__HANDLE__, __FIFONUMBER__) (((__FIFONUMBER__) == CAN_FIFO0)? \
+((uint8_t)((__HANDLE__)->Instance->RF0R&(uint32_t)0x03)) : ((uint8_t)((__HANDLE__)->Instance->RF1R&(uint32_t)0x03)))
+
+/** @brief Check whether the specified CAN flag is set or not.
+ * @param __HANDLE__: specifies the CAN Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg CAN_TSR_RQCP0: Request MailBox0 Flag
+ * @arg CAN_TSR_RQCP1: Request MailBox1 Flag
+ * @arg CAN_TSR_RQCP2: Request MailBox2 Flag
+ * @arg CAN_FLAG_TXOK0: Transmission OK MailBox0 Flag
+ * @arg CAN_FLAG_TXOK1: Transmission OK MailBox1 Flag
+ * @arg CAN_FLAG_TXOK2: Transmission OK MailBox2 Flag
+ * @arg CAN_FLAG_TME0: Transmit mailbox 0 empty Flag
+ * @arg CAN_FLAG_TME1: Transmit mailbox 1 empty Flag
+ * @arg CAN_FLAG_TME2: Transmit mailbox 2 empty Flag
+ * @arg CAN_FLAG_FMP0: FIFO 0 Message Pending Flag
+ * @arg CAN_FLAG_FF0: FIFO 0 Full Flag
+ * @arg CAN_FLAG_FOV0: FIFO 0 Overrun Flag
+ * @arg CAN_FLAG_FMP1: FIFO 1 Message Pending Flag
+ * @arg CAN_FLAG_FF1: FIFO 1 Full Flag
+ * @arg CAN_FLAG_FOV1: FIFO 1 Overrun Flag
+ * @arg CAN_FLAG_WKU: Wake up Flag
+ * @arg CAN_FLAG_SLAK: Sleep acknowledge Flag
+ * @arg CAN_FLAG_SLAKI: Sleep acknowledge Flag
+ * @arg CAN_FLAG_EWG: Error Warning Flag
+ * @arg CAN_FLAG_EPV: Error Passive Flag
+ * @arg CAN_FLAG_BOF: Bus-Off Flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define CAN_FLAG_MASK ((uint32_t)0x000000FF)
+#define __HAL_CAN_GET_FLAG(__HANDLE__, __FLAG__) \
+((((__FLAG__) >> 8) == 5)? ((((__HANDLE__)->Instance->TSR) & (1 << ((__FLAG__) & CAN_FLAG_MASK))) == (1 << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8) == 2)? ((((__HANDLE__)->Instance->RF0R) & (1 << ((__FLAG__) & CAN_FLAG_MASK))) == (1 << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8) == 4)? ((((__HANDLE__)->Instance->RF1R) & (1 << ((__FLAG__) & CAN_FLAG_MASK))) == (1 << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8) == 1)? ((((__HANDLE__)->Instance->MSR) & (1 << ((__FLAG__) & CAN_FLAG_MASK))) == (1 << ((__FLAG__) & CAN_FLAG_MASK))): \
+ ((((__HANDLE__)->Instance->ESR) & (1 << ((__FLAG__) & CAN_FLAG_MASK))) == (1 << ((__FLAG__) & CAN_FLAG_MASK))))
+
+/** @brief Clear the specified CAN pending flag.
+ * @param __HANDLE__: specifies the CAN Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg CAN_TSR_RQCP0: Request MailBox0 Flag
+ * @arg CAN_TSR_RQCP1: Request MailBox1 Flag
+ * @arg CAN_TSR_RQCP2: Request MailBox2 Flag
+ * @arg CAN_FLAG_TXOK0: Transmission OK MailBox0 Flag
+ * @arg CAN_FLAG_TXOK1: Transmission OK MailBox1 Flag
+ * @arg CAN_FLAG_TXOK2: Transmission OK MailBox2 Flag
+ * @arg CAN_FLAG_TME0: Transmit mailbox 0 empty Flag
+ * @arg CAN_FLAG_TME1: Transmit mailbox 1 empty Flag
+ * @arg CAN_FLAG_TME2: Transmit mailbox 2 empty Flag
+ * @arg CAN_FLAG_FMP0: FIFO 0 Message Pending Flag
+ * @arg CAN_FLAG_FF0: FIFO 0 Full Flag
+ * @arg CAN_FLAG_FOV0: FIFO 0 Overrun Flag
+ * @arg CAN_FLAG_FMP1: FIFO 1 Message Pending Flag
+ * @arg CAN_FLAG_FF1: FIFO 1 Full Flag
+ * @arg CAN_FLAG_FOV1: FIFO 1 Overrun Flag
+ * @arg CAN_FLAG_WKU: Wake up Flag
+ * @arg CAN_FLAG_SLAKI: Sleep acknowledge Flag
+ * @arg CAN_FLAG_EWG: Error Warning Flag
+ * @arg CAN_FLAG_EPV: Error Passive Flag
+ * @arg CAN_FLAG_BOF: Bus-Off Flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_CAN_CLEAR_FLAG(__HANDLE__, __FLAG__) \
+((((__FLAG__) >> 8U) == 5)? (((__HANDLE__)->Instance->TSR) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8U) == 2)? (((__HANDLE__)->Instance->RF0R) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8U) == 4)? (((__HANDLE__)->Instance->RF1R) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8U) == 1)? (((__HANDLE__)->Instance->MSR) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): 0)
+
+
+/** @brief Check if the specified CAN interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the CAN Handle.
+ * @param __INTERRUPT__: specifies the CAN interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg CAN_IT_TME: Transmit mailbox empty interrupt enable
+ * @arg CAN_IT_FMP0: FIFO0 message pending interrupt enablev
+ * @arg CAN_IT_FMP1: FIFO1 message pending interrupt enable
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_CAN_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/**
+ * @brief Check the transmission status of a CAN Frame.
+ * @param __HANDLE__: CAN handle.
+ * @param __TRANSMITMAILBOX__: the number of the mailbox that is used for transmission.
+ * @retval The new status of transmission (TRUE or FALSE).
+ */
+#define __HAL_CAN_TRANSMIT_STATUS(__HANDLE__, __TRANSMITMAILBOX__)\
+(((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_0)? ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP0 | CAN_TSR_TXOK0 | CAN_TSR_TME0)) == (CAN_TSR_RQCP0 | CAN_TSR_TXOK0 | CAN_TSR_TME0)) :\
+ ((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_1)? ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1)) == (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1)) :\
+ ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2)) == (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2)))
+
+
+
+/**
+ * @brief Release the specified receive FIFO.
+ * @param __HANDLE__: CAN handle.
+ * @param __FIFONUMBER__: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1.
+ * @retval None
+ */
+#define __HAL_CAN_FIFO_RELEASE(__HANDLE__, __FIFONUMBER__) (((__FIFONUMBER__) == CAN_FIFO0)? \
+((__HANDLE__)->Instance->RF0R |= CAN_RF0R_RFOM0) : ((__HANDLE__)->Instance->RF1R |= CAN_RF1R_RFOM1))
+
+/**
+ * @brief Cancel a transmit request.
+ * @param __HANDLE__: specifies the CAN Handle.
+ * @param __TRANSMITMAILBOX__: the number of the mailbox that is used for transmission.
+ * @retval None
+ */
+#define __HAL_CAN_CANCEL_TRANSMIT(__HANDLE__, __TRANSMITMAILBOX__)\
+(((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_0)? ((__HANDLE__)->Instance->TSR |= CAN_TSR_ABRQ0) :\
+ ((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_1)? ((__HANDLE__)->Instance->TSR |= CAN_TSR_ABRQ1) :\
+ ((__HANDLE__)->Instance->TSR |= CAN_TSR_ABRQ2))
+
+/**
+ * @brief Enable or disables the DBG Freeze for CAN.
+ * @param __HANDLE__: specifies the CAN Handle.
+ * @param __NEWSTATE__: new state of the CAN peripheral.
+ * This parameter can be: ENABLE (CAN reception/transmission is frozen
+ * during debug. Reception FIFOs can still be accessed/controlled normally)
+ * or DISABLE (CAN is working during debug).
+ * @retval None
+ */
+#define __HAL_CAN_DBG_FREEZE(__HANDLE__, __NEWSTATE__) (((__NEWSTATE__) == ENABLE)? \
+((__HANDLE__)->Instance->MCR |= CAN_MCR_DBF) : ((__HANDLE__)->Instance->MCR &= ~CAN_MCR_DBF))
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CAN_Exported_Functions CAN Exported Functions
+ * @{
+ */
+
+/** @addtogroup CAN_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_CAN_Init(CAN_HandleTypeDef* hcan);
+HAL_StatusTypeDef HAL_CAN_ConfigFilter(CAN_HandleTypeDef* hcan, CAN_FilterConfTypeDef* sFilterConfig);
+HAL_StatusTypeDef HAL_CAN_DeInit(CAN_HandleTypeDef* hcan);
+void HAL_CAN_MspInit(CAN_HandleTypeDef* hcan);
+void HAL_CAN_MspDeInit(CAN_HandleTypeDef* hcan);
+/**
+ * @}
+ */
+
+/** @addtogroup CAN_Exported_Functions_Group2 I/O operation functions
+ * @brief I/O operation functions
+ * @{
+ */
+
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_CAN_Transmit(CAN_HandleTypeDef *hcan, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CAN_Transmit_IT(CAN_HandleTypeDef *hcan);
+HAL_StatusTypeDef HAL_CAN_Receive(CAN_HandleTypeDef *hcan, uint8_t FIFONumber, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CAN_Receive_IT(CAN_HandleTypeDef *hcan, uint8_t FIFONumber);
+HAL_StatusTypeDef HAL_CAN_Sleep(CAN_HandleTypeDef *hcan);
+HAL_StatusTypeDef HAL_CAN_WakeUp(CAN_HandleTypeDef *hcan);
+
+void HAL_CAN_IRQHandler(CAN_HandleTypeDef* hcan);
+
+void HAL_CAN_TxCpltCallback(CAN_HandleTypeDef* hcan);
+void HAL_CAN_RxCpltCallback(CAN_HandleTypeDef* hcan);
+void HAL_CAN_ErrorCallback(CAN_HandleTypeDef *hcan);
+/**
+ * @}
+ */
+
+/** @addtogroup CAN_Exported_Functions_Group3 Peripheral State and Error functions
+ * @brief CAN Peripheral State functions
+ * @{
+ */
+/* Peripheral State and Error functions ***************************************/
+uint32_t HAL_CAN_GetError(CAN_HandleTypeDef *hcan);
+HAL_CAN_StateTypeDef HAL_CAN_GetState(CAN_HandleTypeDef* hcan);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F072xB || STM32F042x6 || STM32F048xx || STM32F078xx || STM32F091xC || STM32F098xx */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_CAN_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/include/stm32f0xx_hal_cec.h b/f0/include/stm32f0xx_hal_cec.h
new file mode 100755
index 0000000000000000000000000000000000000000..1ef17c5b7fb5e49f7556d287695279a3d4b30421
--- /dev/null
+++ b/f0/include/stm32f0xx_hal_cec.h
@@ -0,0 +1,598 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_cec.h
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief Header file of CEC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_CEC_H
+#define __STM32F0xx_HAL_CEC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F042x6) || defined(STM32F048xx) ||\
+ defined(STM32F051x8) || defined(STM32F058xx) ||\
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) ||\
+ defined(STM32F091xC) || defined(STM32F098xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CEC CEC HAL Module Driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup CEC_Exported_Types CEC Exported Types
+ * @{
+ */
+
+/**
+ * @brief CEC Init Structure definition
+ */
+typedef struct
+{
+ uint32_t SignalFreeTime; /*!< Set SFT field, specifies the Signal Free Time.
+ It can be one of @ref CEC_Signal_Free_Time
+ and belongs to the set {0,...,7} where
+ 0x0 is the default configuration
+ else means 0.5 + (SignalFreeTime - 1) nominal data bit periods */
+
+ uint32_t Tolerance; /*!< Set RXTOL bit, specifies the tolerance accepted on the received waveforms,
+ it can be a value of @ref CEC_Tolerance : it is either CEC_STANDARD_TOLERANCE
+ or CEC_EXTENDED_TOLERANCE */
+
+ uint32_t BRERxStop; /*!< Set BRESTP bit @ref CEC_BRERxStop : specifies whether or not a Bit Rising Error stops the reception.
+ CEC_NO_RX_STOP_ON_BRE: reception is not stopped.
+ CEC_RX_STOP_ON_BRE: reception is stopped. */
+
+ uint32_t BREErrorBitGen; /*!< Set BREGEN bit @ref CEC_BREErrorBitGen : specifies whether or not an Error-Bit is generated on the
+ CEC line upon Bit Rising Error detection.
+ CEC_BRE_ERRORBIT_NO_GENERATION: no error-bit generation.
+ CEC_BRE_ERRORBIT_GENERATION: error-bit generation if BRESTP is set. */
+
+ uint32_t LBPEErrorBitGen; /*!< Set LBPEGEN bit @ref CEC_LBPEErrorBitGen : specifies whether or not an Error-Bit is generated on the
+ CEC line upon Long Bit Period Error detection.
+ CEC_LBPE_ERRORBIT_NO_GENERATION: no error-bit generation.
+ CEC_LBPE_ERRORBIT_GENERATION: error-bit generation. */
+
+ uint32_t BroadcastMsgNoErrorBitGen; /*!< Set BRDNOGEN bit @ref CEC_BroadCastMsgErrorBitGen : allows to avoid an Error-Bit generation on the CEC line
+ upon an error detected on a broadcast message.
+
+ It supersedes BREGEN and LBPEGEN bits for a broadcast message error handling. It can take two values:
+
+ 1) CEC_BROADCASTERROR_ERRORBIT_GENERATION.
+ a) BRE detection: error-bit generation on the CEC line if BRESTP=CEC_RX_STOP_ON_BRE
+ and BREGEN=CEC_BRE_ERRORBIT_NO_GENERATION.
+ b) LBPE detection: error-bit generation on the CEC line
+ if LBPGEN=CEC_LBPE_ERRORBIT_NO_GENERATION.
+
+ 2) CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION.
+ no error-bit generation in case neither a) nor b) are satisfied. Additionally,
+ there is no error-bit generation in case of Short Bit Period Error detection in
+ a broadcast message while LSTN bit is set. */
+
+ uint32_t SignalFreeTimeOption; /*!< Set SFTOP bit @ref CEC_SFT_Option : specifies when SFT timer starts.
+ CEC_SFT_START_ON_TXSOM SFT: timer starts when TXSOM is set by software.
+ CEC_SFT_START_ON_TX_RX_END: SFT timer starts automatically at the end of message transmission/reception. */
+
+ uint32_t OwnAddress; /*!< Set OAR field, specifies CEC device address within a 15-bit long field */
+
+ uint32_t ListenMode; /*!< Set LSTN bit @ref CEC_Listening_Mode : specifies device listening mode. It can take two values:
+
+ CEC_REDUCED_LISTENING_MODE: CEC peripheral receives only message addressed to its
+ own address (OAR). Messages addressed to different destination are ignored.
+ Broadcast messages are always received.
+
+ CEC_FULL_LISTENING_MODE: CEC peripheral receives messages addressed to its own
+ address (OAR) with positive acknowledge. Messages addressed to different destination
+ are received, but without interfering with the CEC bus: no acknowledge sent. */
+
+ uint8_t InitiatorAddress; /* Initiator address (source logical address, sent in each header) */
+
+}CEC_InitTypeDef;
+
+/**
+ * @brief HAL CEC State structures definition
+ */
+typedef enum
+{
+ HAL_CEC_STATE_RESET = 0x00, /*!< Peripheral Reset state */
+ HAL_CEC_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_CEC_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_CEC_STATE_BUSY_TX = 0x03, /*!< Data Transmission process is ongoing */
+ HAL_CEC_STATE_BUSY_RX = 0x04, /*!< Data Reception process is ongoing */
+ HAL_CEC_STATE_STANDBY_RX = 0x05, /*!< IP ready to receive, doesn't prevent IP to transmit */
+ HAL_CEC_STATE_TIMEOUT = 0x06, /*!< Timeout state */
+ HAL_CEC_STATE_ERROR = 0x07 /*!< State Error */
+}HAL_CEC_StateTypeDef;
+
+/**
+ * @brief HAL Error structures definition
+ */
+typedef enum
+{
+ HAL_CEC_ERROR_NONE = (uint32_t) 0x0, /*!< no error */
+ HAL_CEC_ERROR_RXOVR = CEC_ISR_RXOVR, /*!< CEC Rx-Overrun */
+ HAL_CEC_ERROR_BRE = CEC_ISR_BRE, /*!< CEC Rx Bit Rising Error */
+ HAL_CEC_ERROR_SBPE = CEC_ISR_SBPE, /*!< CEC Rx Short Bit period Error */
+ HAL_CEC_ERROR_LBPE = CEC_ISR_LBPE, /*!< CEC Rx Long Bit period Error */
+ HAL_CEC_ERROR_RXACKE = CEC_ISR_RXACKE, /*!< CEC Rx Missing Acknowledge */
+ HAL_CEC_ERROR_ARBLST = CEC_ISR_ARBLST, /*!< CEC Arbitration Lost */
+ HAL_CEC_ERROR_TXUDR = CEC_ISR_TXUDR, /*!< CEC Tx-Buffer Underrun */
+ HAL_CEC_ERROR_TXERR = CEC_ISR_TXERR, /*!< CEC Tx-Error */
+ HAL_CEC_ERROR_TXACKE = CEC_ISR_TXACKE /*!< CEC Tx Missing Acknowledge */
+}
+HAL_CEC_ErrorTypeDef;
+
+/**
+ * @brief CEC handle Structure definition
+ */
+typedef struct
+{
+ CEC_TypeDef *Instance; /* CEC registers base address */
+
+ CEC_InitTypeDef Init; /* CEC communication parameters */
+
+ uint8_t *pTxBuffPtr; /* Pointer to CEC Tx transfer Buffer */
+
+ uint16_t TxXferCount; /* CEC Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /* Pointer to CEC Rx transfer Buffer */
+
+ uint16_t RxXferSize; /* CEC Rx Transfer size, 0: header received only */
+
+ __IO uint32_t ErrorCode; /* For errors handling purposes, copy of ISR register
+ in case error is reported */
+
+ HAL_LockTypeDef Lock; /* Locking object */
+
+ HAL_CEC_StateTypeDef State; /* CEC communication state */
+
+}CEC_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup CEC_Exported_Constants CEC Exported Constants
+ * @{
+ */
+
+/** @defgroup CEC_Signal_Free_Time Signal Free Time setting parameter
+ * @{
+ */
+#define CEC_DEFAULT_SFT ((uint32_t)0x00000000)
+#define CEC_0_5_BITPERIOD_SFT ((uint32_t)0x00000001)
+#define CEC_1_5_BITPERIOD_SFT ((uint32_t)0x00000002)
+#define CEC_2_5_BITPERIOD_SFT ((uint32_t)0x00000003)
+#define CEC_3_5_BITPERIOD_SFT ((uint32_t)0x00000004)
+#define CEC_4_5_BITPERIOD_SFT ((uint32_t)0x00000005)
+#define CEC_5_5_BITPERIOD_SFT ((uint32_t)0x00000006)
+#define CEC_6_5_BITPERIOD_SFT ((uint32_t)0x00000007)
+#define IS_CEC_SIGNALFREETIME(SFT) ((SFT) <= CEC_CFGR_SFT)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Tolerance Receiver Tolerance
+ * @{
+ */
+#define CEC_STANDARD_TOLERANCE ((uint32_t)0x00000000)
+#define CEC_EXTENDED_TOLERANCE ((uint32_t)CEC_CFGR_RXTOL)
+#define IS_CEC_TOLERANCE(RXTOL) (((RXTOL) == CEC_STANDARD_TOLERANCE) || \
+ ((RXTOL) == CEC_EXTENDED_TOLERANCE))
+/**
+ * @}
+ */
+
+/** @defgroup CEC_BRERxStop Reception Stop on Error
+ * @{
+ */
+#define CEC_NO_RX_STOP_ON_BRE ((uint32_t)0x00000000)
+#define CEC_RX_STOP_ON_BRE ((uint32_t)CEC_CFGR_BRESTP)
+#define IS_CEC_BRERXSTOP(BRERXSTOP) (((BRERXSTOP) == CEC_NO_RX_STOP_ON_BRE) || \
+ ((BRERXSTOP) == CEC_RX_STOP_ON_BRE))
+/**
+ * @}
+ */
+
+/** @defgroup CEC_BREErrorBitGen Error Bit Generation if Bit Rise Error reported
+ * @{
+ */
+#define CEC_BRE_ERRORBIT_NO_GENERATION ((uint32_t)0x00000000)
+#define CEC_BRE_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_BREGEN)
+#define IS_CEC_BREERRORBITGEN(ERRORBITGEN) (((ERRORBITGEN) == CEC_BRE_ERRORBIT_NO_GENERATION) || \
+ ((ERRORBITGEN) == CEC_BRE_ERRORBIT_GENERATION))
+/**
+ * @}
+ */
+
+/** @defgroup CEC_LBPEErrorBitGen Error Bit Generation if Long Bit Period Error reported
+ * @{
+ */
+#define CEC_LBPE_ERRORBIT_NO_GENERATION ((uint32_t)0x00000000)
+#define CEC_LBPE_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_LBPEGEN)
+#define IS_CEC_LBPEERRORBITGEN(ERRORBITGEN) (((ERRORBITGEN) == CEC_LBPE_ERRORBIT_NO_GENERATION) || \
+ ((ERRORBITGEN) == CEC_LBPE_ERRORBIT_GENERATION))
+/**
+ * @}
+ */
+
+/** @defgroup CEC_BroadCastMsgErrorBitGen Error Bit Generation on Broadcast message
+ * @{
+ */
+#define CEC_BROADCASTERROR_ERRORBIT_GENERATION ((uint32_t)0x00000000)
+#define CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_BRDNOGEN)
+#define IS_CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION(ERRORBITGEN) (((ERRORBITGEN) == CEC_BROADCASTERROR_ERRORBIT_GENERATION) || \
+ ((ERRORBITGEN) == CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION))
+/**
+ * @}
+ */
+
+/** @defgroup CEC_SFT_Option Signal Free Time start option
+ * @{
+ */
+#define CEC_SFT_START_ON_TXSOM ((uint32_t)0x00000000)
+#define CEC_SFT_START_ON_TX_RX_END ((uint32_t)CEC_CFGR_SFTOPT)
+#define IS_CEC_SFTOP(SFTOP) (((SFTOP) == CEC_SFT_START_ON_TXSOM) || \
+ ((SFTOP) == CEC_SFT_START_ON_TX_RX_END))
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Listening_Mode Listening mode option
+ * @{
+ */
+#define CEC_REDUCED_LISTENING_MODE ((uint32_t)0x00000000)
+#define CEC_FULL_LISTENING_MODE ((uint32_t)CEC_CFGR_LSTN)
+#define IS_CEC_LISTENING_MODE(MODE) (((MODE) == CEC_REDUCED_LISTENING_MODE) || \
+ ((MODE) == CEC_FULL_LISTENING_MODE))
+/**
+ * @}
+ */
+
+/** @defgroup CEC_ALL_ERROR all RX or TX errors flags in CEC ISR register
+ * @{
+ */
+#define CEC_ISR_ALL_ERROR ((uint32_t)CEC_ISR_RXOVR|CEC_ISR_BRE|CEC_ISR_SBPE|CEC_ISR_LBPE|CEC_ISR_RXACKE|\
+ CEC_ISR_ARBLST|CEC_ISR_TXUDR|CEC_ISR_TXERR|CEC_ISR_TXACKE)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_IER_ALL_RX all RX errors interrupts enabling flag
+ * @{
+ */
+#define CEC_IER_RX_ALL_ERR ((uint32_t)CEC_IER_RXACKEIE|CEC_IER_LBPEIE|CEC_IER_SBPEIE|CEC_IER_BREIE|CEC_IER_RXOVRIE)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_IER_ALL_TX all TX errors interrupts enabling flag
+ * @{
+ */
+#define CEC_IER_TX_ALL_ERR ((uint32_t)CEC_IER_TXACKEIE|CEC_IER_TXERRIE|CEC_IER_TXUDRIE|CEC_IER_ARBLSTIE)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_OAR_Position Device Own Address position in CEC CFGR register
+ * @{
+ */
+#define CEC_CFGR_OAR_LSB_POS ((uint32_t) 16)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Initiator_Position Initiator logical address position in message header
+ * @{
+ */
+#define CEC_INITIATOR_LSB_POS ((uint32_t) 4)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup CEC_Exported_Macros CEC Exported Macros
+ * @{
+ */
+
+/** @brief Reset CEC handle state
+ * @param __HANDLE__: CEC handle.
+ * @retval None
+ */
+#define __HAL_CEC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CEC_STATE_RESET)
+
+/** @brief Checks whether or not the specified CEC interrupt flag is set.
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @param __INTERRUPT__: specifies the interrupt to check.
+ * This parameter can be one of the following values:
+ * @arg CEC_ISR_RXBR : Rx-Byte Received
+ * @arg CEC_ISR_RXEND : End of Reception
+ * @arg CEC_ISR_RXOVR : Rx Overrun
+ * @arg CEC_ISR_BRE : Rx Bit Rising Error
+ * @arg CEC_ISR_SBPE : Rx Short Bit Period Error
+ * @arg CEC_ISR_LBPE : Rx Long Bit Period Error
+ * @arg CEC_ISR_RXACKE : Rx Missing Acknowledge
+ * @arg CEC_ISR_ARBLST : Arbitration lost
+ * @arg CEC_ISR_TXBR : Tx-Byte Request
+ * @arg CEC_ISR_TXEND : End of Transmission
+ * @arg CEC_ISR_TXUDR : Tx-buffer Underrun
+ * @arg CEC_ISR_TXERR : Tx Error
+ * @arg CEC_ISR_TXACKE : Tx Missing Acknowledge
+ * @retval ITStatus
+ */
+#define __HAL_CEC_GET_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->ISR & (__INTERRUPT__))
+
+/** @brief Clears the interrupt or status flag when raised (write at 1)
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @param __FLAG__: specifies the interrupt/status flag to clear.
+ * This parameter can be one of the following values:
+ * @arg CEC_ISR_RXBR : Rx-Byte Received
+ * @arg CEC_ISR_RXEND : End of Reception
+ * @arg CEC_ISR_RXOVR : Rx Overrun
+ * @arg CEC_ISR_BRE : Rx Bit Rising Error
+ * @arg CEC_ISR_SBPE : Rx Short Bit Period Error
+ * @arg CEC_ISR_LBPE : Rx Long Bit Period Error
+ * @arg CEC_ISR_RXACKE : Rx Missing Acknowledge
+ * @arg CEC_ISR_ARBLST : Arbitration lost
+ * @arg CEC_ISR_TXBR : Tx-Byte Request
+ * @arg CEC_ISR_TXEND : End of Transmission
+ * @arg CEC_ISR_TXUDR : Tx-buffer Underrun
+ * @arg CEC_ISR_TXERR : Tx Error
+ * @arg CEC_ISR_TXACKE : Tx Missing Acknowledge
+ * @retval none
+ */
+#define __HAL_CEC_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR = (__FLAG__))
+
+/** @brief Enables the specified CEC interrupt.
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @param __INTERRUPT__: specifies the CEC interrupt to enable.
+ * This parameter can be one of the following values:
+ * @arg CEC_IER_RXBRIE : Rx-Byte Received IT Enable
+ * @arg CEC_IER_RXENDIE : End Of Reception IT Enable
+ * @arg CEC_IER_RXOVRIE : Rx-Overrun IT Enable
+ * @arg CEC_IER_BREIE : Rx Bit Rising Error IT Enable
+ * @arg CEC_IER_SBPEIE : Rx Short Bit period Error IT Enable
+ * @arg CEC_IER_LBPEIE : Rx Long Bit period Error IT Enable
+ * @arg CEC_IER_RXACKEIE : Rx Missing Acknowledge IT Enable
+ * @arg CEC_IER_ARBLSTIE : Arbitration Lost IT Enable
+ * @arg CEC_IER_TXBRIE : Tx Byte Request IT Enable
+ * @arg CEC_IER_TXENDIE : End of Transmission IT Enable
+ * @arg CEC_IER_TXUDRIE : Tx-Buffer Underrun IT Enable
+ * @arg CEC_IER_TXERRIE : Tx-Error IT Enable
+ * @arg CEC_IER_TXACKEIE : Tx Missing Acknowledge IT Enable
+ * @retval none
+ */
+#define __HAL_CEC_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__))
+
+/** @brief Disables the specified CEC interrupt.
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @param __INTERRUPT__: specifies the CEC interrupt to disable.
+ * This parameter can be one of the following values:
+ * @arg CEC_IER_RXBRIE : Rx-Byte Received IT Enable
+ * @arg CEC_IER_RXENDIE : End Of Reception IT Enable
+ * @arg CEC_IER_RXOVRIE : Rx-Overrun IT Enable
+ * @arg CEC_IER_BREIE : Rx Bit Rising Error IT Enable
+ * @arg CEC_IER_SBPEIE : Rx Short Bit period Error IT Enable
+ * @arg CEC_IER_LBPEIE : Rx Long Bit period Error IT Enable
+ * @arg CEC_IER_RXACKEIE : Rx Missing Acknowledge IT Enable
+ * @arg CEC_IER_ARBLSTIE : Arbitration Lost IT Enable
+ * @arg CEC_IER_TXBRIE : Tx Byte Request IT Enable
+ * @arg CEC_IER_TXENDIE : End of Transmission IT Enable
+ * @arg CEC_IER_TXUDRIE : Tx-Buffer Underrun IT Enable
+ * @arg CEC_IER_TXERRIE : Tx-Error IT Enable
+ * @arg CEC_IER_TXACKEIE : Tx Missing Acknowledge IT Enable
+ * @retval none
+ */
+#define __HAL_CEC_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= (~(__INTERRUPT__)))
+
+/** @brief Checks whether or not the specified CEC interrupt is enabled.
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @param __INTERRUPT__: specifies the CEC interrupt to check.
+ * This parameter can be one of the following values:
+ * @arg CEC_IER_RXBRIE : Rx-Byte Received IT Enable
+ * @arg CEC_IER_RXENDIE : End Of Reception IT Enable
+ * @arg CEC_IER_RXOVRIE : Rx-Overrun IT Enable
+ * @arg CEC_IER_BREIE : Rx Bit Rising Error IT Enable
+ * @arg CEC_IER_SBPEIE : Rx Short Bit period Error IT Enable
+ * @arg CEC_IER_LBPEIE : Rx Long Bit period Error IT Enable
+ * @arg CEC_IER_RXACKEIE : Rx Missing Acknowledge IT Enable
+ * @arg CEC_IER_ARBLSTIE : Arbitration Lost IT Enable
+ * @arg CEC_IER_TXBRIE : Tx Byte Request IT Enable
+ * @arg CEC_IER_TXENDIE : End of Transmission IT Enable
+ * @arg CEC_IER_TXUDRIE : Tx-Buffer Underrun IT Enable
+ * @arg CEC_IER_TXERRIE : Tx-Error IT Enable
+ * @arg CEC_IER_TXACKEIE : Tx Missing Acknowledge IT Enable
+ * @retval FlagStatus
+ */
+#define __HAL_CEC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER & (__INTERRUPT__))
+
+/** @brief Enables the CEC device
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval none
+ */
+#define __HAL_CEC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= CEC_CR_CECEN)
+
+/** @brief Disables the CEC device
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval none
+ */
+#define __HAL_CEC_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~CEC_CR_CECEN)
+
+/** @brief Set Transmission Start flag
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval none
+ */
+#define __HAL_CEC_FIRST_BYTE_TX_SET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CEC_CR_TXSOM)
+
+/** @brief Set Transmission End flag
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval none
+ * If the CEC message consists of only one byte, TXEOM must be set before of TXSOM.
+ */
+#define __HAL_CEC_LAST_BYTE_TX_SET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CEC_CR_TXEOM)
+
+/** @brief Get Transmission Start flag
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval FlagStatus
+ */
+#define __HAL_CEC_GET_TRANSMISSION_START_FLAG(__HANDLE__) ((__HANDLE__)->Instance->CR & CEC_CR_TXSOM)
+
+/** @brief Get Transmission End flag
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval FlagStatus
+ */
+#define __HAL_CEC_GET_TRANSMISSION_END_FLAG(__HANDLE__) ((__HANDLE__)->Instance->CR & CEC_CR_TXEOM)
+
+/** @brief Clear OAR register
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval none
+ */
+#define __HAL_CEC_CLEAR_OAR(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CFGR, CEC_CFGR_OAR)
+
+/** @brief Set OAR register (without resetting previously set address in case of multi-address mode)
+ * To reset OAR, __HAL_CEC_CLEAR_OAR() needs to be called beforehand
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @param __ADDRESS__: Own Address value (CEC logical address is identified by bit position)
+ * @retval none
+ */
+#define __HAL_CEC_SET_OAR(__HANDLE__,__ADDRESS__) SET_BIT((__HANDLE__)->Instance->CFGR, (__ADDRESS__)<< CEC_CFGR_OAR_LSB_POS)
+
+/** @brief Check CEC device Own Address Register (OAR) setting.
+ * OAR address is written in a 15-bit field within CEC_CFGR register.
+ * @param __ADDRESS__: CEC own address.
+ * @retval Test result (TRUE or FALSE).
+ */
+#define IS_CEC_OAR_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0x07FFF)
+
+/** @brief Check CEC initiator or destination logical address setting.
+ * Initiator and destination addresses are coded over 4 bits.
+ * @param __ADDRESS__: CEC initiator or logical address.
+ * @retval Test result (TRUE or FALSE).
+ */
+#define IS_CEC_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0xF)
+
+/** @brief Check CEC message size.
+ * The message size is the payload size: without counting the header,
+ * it varies from 0 byte (ping operation, one header only, no payload) to
+ * 15 bytes (1 opcode and up to 14 operands following the header).
+ * @param __SIZE__: CEC message size.
+ * @retval Test result (TRUE or FALSE).
+ */
+#define IS_CEC_MSGSIZE(__SIZE__) ((__SIZE__) <= 0xF)
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CEC_Exported_Functions CEC Exported Functions
+ * @{
+ */
+/** @addtogroup CEC_Exported_Functions_Group1 Initialization/de-initialization function
+ * @brief Initialization and Configuration functions
+ * @{
+ */
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_CEC_Init(CEC_HandleTypeDef *hcec);
+HAL_StatusTypeDef HAL_CEC_DeInit(CEC_HandleTypeDef *hcec);
+void HAL_CEC_MspInit(CEC_HandleTypeDef *hcec);
+void HAL_CEC_MspDeInit(CEC_HandleTypeDef *hcec);
+/**
+ * @}
+ */
+
+/** @addtogroup CEC_Exported_Functions_Group2 IO operation function
+ * @brief CEC Transmit/Receive functions
+ * @{
+ */
+/* I/O operation functions ***************************************************/
+HAL_StatusTypeDef HAL_CEC_Transmit(CEC_HandleTypeDef *hcec, uint8_t DestinationAddress, uint8_t *pData, uint32_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CEC_Receive(CEC_HandleTypeDef *hcec, uint8_t *pData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CEC_Transmit_IT(CEC_HandleTypeDef *hcec, uint8_t DestinationAddress, uint8_t *pData, uint32_t Size);
+HAL_StatusTypeDef HAL_CEC_Receive_IT(CEC_HandleTypeDef *hcec, uint8_t *pData);
+void HAL_CEC_IRQHandler(CEC_HandleTypeDef *hcec);
+void HAL_CEC_TxCpltCallback(CEC_HandleTypeDef *hcec);
+void HAL_CEC_RxCpltCallback(CEC_HandleTypeDef *hcec);
+void HAL_CEC_ErrorCallback(CEC_HandleTypeDef *hcec);
+/**
+ * @}
+ */
+
+/** @addtogroup CEC_Exported_Functions_Group3 Peripheral Control function
+ * @brief CEC control functions
+ * @{
+ */
+/* Peripheral State functions ************************************************/
+HAL_CEC_StateTypeDef HAL_CEC_GetState(CEC_HandleTypeDef *hcec);
+uint32_t HAL_CEC_GetError(CEC_HandleTypeDef *hcec);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined(STM32F042x6) || defined(STM32F048xx) || */
+ /* defined(STM32F051x8) || defined(STM32F058xx) || */
+ /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || */
+ /* defined(STM32F091xC) || defined(STM32F098xx) */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_CEC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/include/stm32f0xx_hal_comp.h b/f0/include/stm32f0xx_hal_comp.h
new file mode 100755
index 0000000000000000000000000000000000000000..cbc12568113003f2296e9b4523b251ed35bcd771
--- /dev/null
+++ b/f0/include/stm32f0xx_hal_comp.h
@@ -0,0 +1,479 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_comp.h
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief Header file of COMP HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_COMP_H
+#define __STM32F0xx_HAL_COMP_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup COMP COMP HAL Module Driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup COMP_Exported_Types COMP Exported Types
+ * @{
+ */
+
+/**
+ * @brief COMP Init structure definition
+ */
+typedef struct
+{
+
+ uint32_t InvertingInput; /*!< Selects the inverting input of the comparator.
+ This parameter can be a value of @ref COMP_InvertingInput */
+
+ uint32_t NonInvertingInput; /*!< Selects the non inverting input of the comparator.
+ This parameter can be a value of @ref COMP_NonInvertingInput */
+
+ uint32_t Output; /*!< Selects the output redirection of the comparator.
+ This parameter can be a value of @ref COMP_Output */
+
+ uint32_t OutputPol; /*!< Selects the output polarity of the comparator.
+ This parameter can be a value of @ref COMP_OutputPolarity */
+
+ uint32_t Hysteresis; /*!< Selects the hysteresis voltage of the comparator.
+ This parameter can be a value of @ref COMP_Hysteresis */
+
+ uint32_t Mode; /*!< Selects the operating comsumption mode of the comparator
+ to adjust the speed/consumption.
+ This parameter can be a value of @ref COMP_Mode */
+
+ uint32_t WindowMode; /*!< Selects the window mode of the comparator 1 & 2.
+ This parameter can be a value of @ref COMP_WindowMode */
+
+ uint32_t TriggerMode; /*!< Selects the trigger mode of the comparator (interrupt mode).
+ This parameter can be a value of @ref COMP_TriggerMode */
+
+}COMP_InitTypeDef;
+
+/**
+ * @brief COMP Handle Structure definition
+ */
+typedef struct
+{
+ COMP_TypeDef *Instance; /*!< Register base address */
+ COMP_InitTypeDef Init; /*!< COMP required parameters */
+ HAL_LockTypeDef Lock; /*!< Locking object */
+ __IO uint32_t State; /*!< COMP communication state
+ This parameter can be a value of @ref COMP_State */
+}COMP_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup COMP_Exported_Constants COMP Exported Constants
+ * @{
+ */
+
+/** @defgroup COMP_State COMP State
+ * @{
+ */
+#define HAL_COMP_STATE_RESET ((uint32_t)0x00000000) /*!< COMP not yet initialized or disabled */
+#define HAL_COMP_STATE_READY ((uint32_t)0x00000001) /*!< COMP initialized and ready for use */
+#define HAL_COMP_STATE_READY_LOCKED ((uint32_t)0x00000011) /*!< COMP initialized but the configuration is locked */
+#define HAL_COMP_STATE_BUSY ((uint32_t)0x00000002) /*!< COMP is running */
+#define HAL_COMP_STATE_BUSY_LOCKED ((uint32_t)0x00000012) /*!< COMP is running and the configuration is locked */
+/**
+ * @}
+ */
+
+/** @defgroup COMP_OutputPolarity COMP OutputPolarity
+ * @{
+ */
+#define COMP_OUTPUTPOL_NONINVERTED ((uint32_t)0x00000000) /*!< COMP output on GPIO isn't inverted */
+#define COMP_OUTPUTPOL_INVERTED COMP_CSR_COMP1POL /*!< COMP output on GPIO is inverted */
+
+#define IS_COMP_OUTPUTPOL(POL) (((POL) == COMP_OUTPUTPOL_NONINVERTED) || \
+ ((POL) == COMP_OUTPUTPOL_INVERTED))
+/**
+ * @}
+ */
+
+/** @defgroup COMP_Hysteresis COMP Hysteresis
+ * @{
+ */
+#define COMP_HYSTERESIS_NONE ((uint32_t)0x00000000) /*!< No hysteresis */
+#define COMP_HYSTERESIS_LOW COMP_CSR_COMP1HYST_0 /*!< Hysteresis level low */
+#define COMP_HYSTERESIS_MEDIUM COMP_CSR_COMP1HYST_1 /*!< Hysteresis level medium */
+#define COMP_HYSTERESIS_HIGH COMP_CSR_COMP1HYST /*!< Hysteresis level high */
+
+#define IS_COMP_HYSTERESIS(HYSTERESIS) (((HYSTERESIS) == COMP_HYSTERESIS_NONE) || \
+ ((HYSTERESIS) == COMP_HYSTERESIS_LOW) || \
+ ((HYSTERESIS) == COMP_HYSTERESIS_MEDIUM) || \
+ ((HYSTERESIS) == COMP_HYSTERESIS_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup COMP_Mode COMP Mode
+ * @{
+ */
+/* Please refer to the electrical characteristics in the device datasheet for
+ the power consumption values */
+#define COMP_MODE_HIGHSPEED ((uint32_t)0x00000000) /*!< High Speed */
+#define COMP_MODE_MEDIUMSPEED COMP_CSR_COMP1MODE_0 /*!< Medium Speed */
+#define COMP_MODE_LOWPOWER COMP_CSR_COMP1MODE_1 /*!< Low power mode */
+#define COMP_MODE_ULTRALOWPOWER COMP_CSR_COMP1MODE /*!< Ultra-low power mode */
+
+#define IS_COMP_MODE(MODE) (((MODE) == COMP_MODE_HIGHSPEED) || \
+ ((MODE) == COMP_MODE_MEDIUMSPEED) || \
+ ((MODE) == COMP_MODE_LOWPOWER) || \
+ ((MODE) == COMP_MODE_ULTRALOWPOWER))
+
+/**
+ * @}
+ */
+
+/** @defgroup COMP_InvertingInput COMP InvertingInput
+ * @{
+ */
+
+#define COMP_INVERTINGINPUT_1_4VREFINT ((uint32_t)0x00000000) /*!< 1/4 VREFINT connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_1_2VREFINT COMP_CSR_COMP1INSEL_0 /*!< 1/2 VREFINT connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_3_4VREFINT COMP_CSR_COMP1INSEL_1 /*!< 3/4 VREFINT connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_VREFINT (COMP_CSR_COMP1INSEL_1|COMP_CSR_COMP1INSEL_0) /*!< VREFINT connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_DAC1 COMP_CSR_COMP1INSEL_2 /*!< DAC_OUT1 (PA4) connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_DAC1SWITCHCLOSED (COMP_CSR_COMP1INSEL_2|COMP_CSR_COMP1SW1) /*!< DAC_OUT1 (PA4) connected to comparator inverting input
+ and close switch (PA0 for COMP1 only) */
+#define COMP_INVERTINGINPUT_DAC2 (COMP_CSR_COMP1INSEL_2|COMP_CSR_COMP1INSEL_0) /*!< DAC_OUT2 (PA5) connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_IO1 (COMP_CSR_COMP1INSEL_2|COMP_CSR_COMP1INSEL_1) /*!< IO (PA0 for COMP1 and PA2 for COMP2) connected to comparator inverting input */
+
+#define IS_COMP_INVERTINGINPUT(INPUT) (((INPUT) == COMP_INVERTINGINPUT_1_4VREFINT) || \
+ ((INPUT) == COMP_INVERTINGINPUT_1_2VREFINT) || \
+ ((INPUT) == COMP_INVERTINGINPUT_3_4VREFINT) || \
+ ((INPUT) == COMP_INVERTINGINPUT_VREFINT) || \
+ ((INPUT) == COMP_INVERTINGINPUT_DAC1) || \
+ ((INPUT) == COMP_INVERTINGINPUT_DAC1SWITCHCLOSED) || \
+ ((INPUT) == COMP_INVERTINGINPUT_DAC2) || \
+ ((INPUT) == COMP_INVERTINGINPUT_IO1))
+/**
+ * @}
+ */
+
+/** @defgroup COMP_NonInvertingInput COMP NonInvertingInput
+ * @{
+ */
+#define COMP_NONINVERTINGINPUT_IO1 ((uint32_t)0x00000000) /*!< I/O1 (PA1 for COMP1, PA3 for COMP2)
+ connected to comparator non inverting input */
+#define COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED COMP_CSR_COMP1SW1 /*!< DAC ouput connected to comparator COMP1 non inverting input */
+
+#define IS_COMP_NONINVERTINGINPUT(INPUT) (((INPUT) == COMP_NONINVERTINGINPUT_IO1) || \
+ ((INPUT) == COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED))
+/**
+ * @}
+ */
+
+/** @defgroup COMP_Output COMP Output
+ * @{
+ */
+
+/* Output Redirection common for COMP1 and COMP2 */
+#define COMP_OUTPUT_NONE ((uint32_t)0x00000000) /*!< COMP output isn't connected to other peripherals */
+#define COMP_OUTPUT_TIM1BKIN COMP_CSR_COMP1OUTSEL_0 /*!< COMP output connected to TIM1 Break Input (BKIN) */
+#define COMP_OUTPUT_TIM1IC1 COMP_CSR_COMP1OUTSEL_1 /*!< COMP output connected to TIM1 Input Capture 1 */
+#define COMP_OUTPUT_TIM1OCREFCLR (COMP_CSR_COMP1OUTSEL_1|COMP_CSR_COMP1OUTSEL_0) /*!< COMP output connected to TIM1 OCREF Clear */
+#define COMP_OUTPUT_TIM2IC4 COMP_CSR_COMP1OUTSEL_2 /*!< COMP output connected to TIM2 Input Capture 4 */
+#define COMP_OUTPUT_TIM2OCREFCLR (COMP_CSR_COMP1OUTSEL_2|COMP_CSR_COMP1OUTSEL_0) /*!< COMP output connected to TIM2 OCREF Clear */
+#define COMP_OUTPUT_TIM3IC1 (COMP_CSR_COMP1OUTSEL_2|COMP_CSR_COMP1OUTSEL_1) /*!< COMP output connected to TIM3 Input Capture 1 */
+#define COMP_OUTPUT_TIM3OCREFCLR COMP_CSR_COMP1OUTSEL /*!< COMP output connected to TIM3 OCREF Clear */
+
+#define IS_COMP_OUTPUT(OUTPUT) (((OUTPUT) == COMP_OUTPUT_NONE) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1IC1) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM3IC1) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM3OCREFCLR))
+
+/**
+ * @}
+ */
+
+/** @defgroup COMP_OutputLevel COMP OutputLevel
+ * @{
+ */
+/* When output polarity is not inverted, comparator output is low when
+ the non-inverting input is at a lower voltage than the inverting input*/
+#define COMP_OUTPUTLEVEL_LOW ((uint32_t)0x00000000)
+/* When output polarity is not inverted, comparator output is high when
+ the non-inverting input is at a higher voltage than the inverting input */
+#define COMP_OUTPUTLEVEL_HIGH COMP_CSR_COMP1OUT
+/**
+ * @}
+ */
+
+/** @defgroup COMP_TriggerMode COMP TriggerMode
+ * @{
+ */
+#define COMP_TRIGGERMODE_NONE ((uint32_t)0x00000000) /*!< No External Interrupt trigger detection */
+#define COMP_TRIGGERMODE_IT_RISING ((uint32_t)0x00000001) /*!< External Interrupt Mode with Rising edge trigger detection */
+#define COMP_TRIGGERMODE_IT_FALLING ((uint32_t)0x00000002) /*!< External Interrupt Mode with Falling edge trigger detection */
+#define COMP_TRIGGERMODE_IT_RISING_FALLING ((uint32_t)0x00000003) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+
+#define IS_COMP_TRIGGERMODE(MODE) (((MODE) == COMP_TRIGGERMODE_NONE) || \
+ ((MODE) == COMP_TRIGGERMODE_IT_RISING) || \
+ ((MODE) == COMP_TRIGGERMODE_IT_FALLING) || \
+ ((MODE) == COMP_TRIGGERMODE_IT_RISING_FALLING))
+/**
+ * @}
+ */
+
+/** @defgroup COMP_WindowMode COMP WindowMode
+ * @{
+ */
+#define COMP_WINDOWMODE_DISABLED ((uint32_t)0x00000000) /*!< Window mode disabled */
+#define COMP_WINDOWMODE_ENABLED COMP_CSR_WNDWEN /*!< Window mode enabled: non inverting input of comparator 2
+ is connected to the non inverting input of comparator 1 (PA1) */
+
+#define IS_COMP_WINDOWMODE(WINDOWMODE) (((WINDOWMODE) == COMP_WINDOWMODE_DISABLED) || \
+ ((WINDOWMODE) == COMP_WINDOWMODE_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup COMP_ExtiLineEvent COMP ExtiLineEvent
+ * Elements values convention: XXXX0000
+ * - XXXX : Interrupt mask in the EMR/IMR/RTSR/FTSR register
+ * @{
+ */
+#define COMP_EXTI_LINE_COMP1_EVENT ((uint32_t)0x00200000) /*!< External interrupt line 21 Connected to COMP1 */
+#define COMP_EXTI_LINE_COMP2_EVENT ((uint32_t)0x00400000) /*!< External interrupt line 22 Connected to COMP2 */
+
+/**
+ * @}
+ */
+
+/** @defgroup COMP_Lock COMP Lock
+ * @{
+ */
+#define COMP_LOCK_DISABLE ((uint32_t)0x00000000)
+#define COMP_LOCK_ENABLE COMP_CSR_COMP1LOCK
+
+#define COMP_STATE_BIT_LOCK ((uint32_t)0x10)
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup COMP_Exported_Macros COMP Exported Macros
+ * @{
+ */
+
+/** @brief Reset COMP handle state
+ * @param __HANDLE__: COMP handle.
+ * @retval None
+ */
+#define __HAL_COMP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_COMP_STATE_RESET)
+
+/**
+ * @brief Checks whether the specified EXTI line flag is set or not.
+ * @param __FLAG__: specifies the COMP Exti sources to be checked.
+ * This parameter can be a value of @ref COMP_ExtiLineEvent
+ * @retval The state of __FLAG__ (SET or RESET).
+ */
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (EXTI->PR & (__FLAG__))
+
+/**
+ * @brief Clear the COMP Exti flags.
+ * @param __FLAG__: specifies the COMP Exti sources to be cleared.
+ * This parameter can be a value of @ref COMP_ExtiLineEvent
+ * @retval None.
+ */
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (EXTI->PR = (__FLAG__))
+
+/**
+ * @brief Enable the COMP Exti Line.
+ * @param __EXTILINE__: specifies the COMP Exti sources to be enabled.
+ * This parameter can be a value of @ref COMP_ExtiLineEvent
+ * @retval None.
+ */
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (EXTI->IMR |= (__EXTILINE__))
+
+/**
+ * @brief Disable the COMP Exti Line.
+ * @param __EXTILINE__: specifies the COMP Exti sources to be disabled.
+ * This parameter can be a value of @ref COMP_ExtiLineEvent
+ * @retval None.
+ */
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (EXTI->IMR &= ~(__EXTILINE__))
+
+/**
+ * @brief Enable the Exti Line rising edge trigger.
+ * @param __EXTILINE__: specifies the COMP Exti sources to be enabled.
+ * This parameter can be a value of @ref COMP_ExtiLineEvent
+ * @retval None.
+ */
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (EXTI->RTSR |= (__EXTILINE__))
+
+/**
+ * @brief Disable the Exti Line rising edge trigger.
+ * @param __EXTILINE__: specifies the COMP Exti sources to be disabled.
+ * This parameter can be a value of @ref COMP_ExtiLineEvent
+ * @retval None.
+ */
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (EXTI->RTSR &= ~(__EXTILINE__))
+
+/**
+ * @brief Enable the Exti Line falling edge trigger.
+ * @param __EXTILINE__: specifies the COMP Exti sources to be enabled.
+ * This parameter can be a value of @ref COMP_ExtiLineEvent
+ * @retval None.
+ */
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (EXTI->FTSR |= (__EXTILINE__))
+
+/**
+ * @brief Disable the Exti Line falling edge trigger.
+ * @param __EXTILINE__: specifies the COMP Exti sources to be disabled.
+ * This parameter can be a value of @ref COMP_ExtiLineEvent
+ * @retval None.
+ */
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (EXTI->FTSR &= ~(__EXTILINE__))
+
+/**
+ * @brief Get the specified EXTI line for a comparator instance
+ * @param __INSTANCE__: specifies the COMP instance.
+ * @retval value of @ref COMP_ExtiLineEvent
+ */
+#define __HAL_COMP_GET_EXTI_LINE(__INSTANCE__) (((__INSTANCE__) == COMP1) ? COMP_EXTI_LINE_COMP1_EVENT : \
+ COMP_EXTI_LINE_COMP2_EVENT)
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup COMP_Exported_Functions COMP Exported Functions
+ * @{
+ */
+/** @addtogroup COMP_Exported_Functions_Group1 Initialization/de-initialization functions
+ * @brief Initialization and Configuration functions
+ * @{
+ */
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_COMP_Init(COMP_HandleTypeDef *hcomp);
+HAL_StatusTypeDef HAL_COMP_DeInit (COMP_HandleTypeDef *hcomp);
+void HAL_COMP_MspInit(COMP_HandleTypeDef *hcomp);
+void HAL_COMP_MspDeInit(COMP_HandleTypeDef *hcomp);
+/**
+ * @}
+ */
+
+/** @addtogroup COMP_Exported_Functions_Group2 I/O operation functions
+ * @brief Data transfers functions
+ * @{
+ */
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_COMP_Start(COMP_HandleTypeDef *hcomp);
+HAL_StatusTypeDef HAL_COMP_Stop(COMP_HandleTypeDef *hcomp);
+HAL_StatusTypeDef HAL_COMP_Start_IT(COMP_HandleTypeDef *hcomp);
+HAL_StatusTypeDef HAL_COMP_Stop_IT(COMP_HandleTypeDef *hcomp);
+void HAL_COMP_IRQHandler(COMP_HandleTypeDef *hcomp);
+/**
+ * @}
+ */
+
+/** @addtogroup COMP_Exported_Functions_Group3 Peripheral Control functions
+ * @brief management functions
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_COMP_Lock(COMP_HandleTypeDef *hcomp);
+uint32_t HAL_COMP_GetOutputLevel(COMP_HandleTypeDef *hcomp);
+
+/* Callback in Interrupt mode */
+void HAL_COMP_TriggerCallback(COMP_HandleTypeDef *hcomp);
+/**
+ * @}
+ */
+
+/** @addtogroup COMP_Exported_Functions_Group4 Peripheral State functions
+ * @brief Peripheral State functions
+ * @{
+ */
+/* Peripheral State and Error functions ***************************************/
+uint32_t HAL_COMP_GetState(COMP_HandleTypeDef *hcomp);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_COMP_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/include/stm32f0xx_hal_cortex.h b/f0/include/stm32f0xx_hal_cortex.h
new file mode 100755
index 0000000000000000000000000000000000000000..aaa0f0593f2659779133b944738510fe8da36a37
--- /dev/null
+++ b/f0/include/stm32f0xx_hal_cortex.h
@@ -0,0 +1,166 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_cortex.h
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief Header file of CORTEX HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_CORTEX_H
+#define __STM32F0xx_HAL_CORTEX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CORTEX CORTEX HAL module driver
+ * @{
+ */
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants
+ * @{
+ */
+
+/** @defgroup CORTEX_Priority CORTEX Priority
+ * @{
+ */
+#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x4)
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_SysTick_clock_source CORTEX SysTick clock source
+ * @{
+ */
+#define SYSTICK_CLKSOURCE_HCLK_DIV8 ((uint32_t)0x00000000)
+#define SYSTICK_CLKSOURCE_HCLK ((uint32_t)0x00000004)
+#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \
+ ((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported Macros -----------------------------------------------------------*/
+/** @defgroup CORTEX_Exported_Macro CORTEX Exported Macro
+ * @{
+ */
+
+/** @brief Configures the SysTick clock source.
+ * @param __CLKSRC__: specifies the SysTick clock source.
+ * This parameter can be one of the following values:
+ * @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source.
+ * @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source.
+ * @retval None
+ */
+#define __HAL_CORTEX_SYSTICKCLK_CONFIG(__CLKSRC__) \
+ do { \
+ if ((__CLKSRC__) == SYSTICK_CLKSOURCE_HCLK) \
+ { \
+ SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK; \
+ } \
+ else \
+ SysTick->CTRL &= ~SYSTICK_CLKSOURCE_HCLK; \
+ } while(0)
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CORTEX_Exported_Functions CORTEX Exported Functions
+ * @{
+ */
+/** @addtogroup CORTEX_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ * @{
+ */
+/* Initialization and de-initialization functions *******************************/
+void HAL_NVIC_SetPriority(IRQn_Type IRQn,uint32_t PreemptPriority, uint32_t SubPriority);
+void HAL_NVIC_EnableIRQ(IRQn_Type IRQn);
+void HAL_NVIC_DisableIRQ(IRQn_Type IRQn);
+void HAL_NVIC_SystemReset(void);
+uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb);
+/**
+ * @}
+ */
+
+/** @addtogroup CORTEX_Exported_Functions_Group2 Peripheral Control functions
+ * @brief Cortex control functions
+ * @{
+ */
+
+/* Peripheral Control functions *************************************************/
+uint32_t HAL_NVIC_GetPriority(IRQn_Type IRQn);
+uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn);
+void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn);
+void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn);
+void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource);
+void HAL_SYSTICK_IRQHandler(void);
+void HAL_SYSTICK_Callback(void);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_CORTEX_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/include/stm32f0xx_hal_crc.h b/f0/include/stm32f0xx_hal_crc.h
new file mode 100755
index 0000000000000000000000000000000000000000..dde8df42064cfcf0c917639e4af835f049ab0486
--- /dev/null
+++ b/f0/include/stm32f0xx_hal_crc.h
@@ -0,0 +1,327 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_crc.h
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief Header file of CRC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_CRC_H
+#define __STM32F0xx_HAL_CRC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CRC CRC HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup CRC_Exported_Types CRC Exported Types
+ * @{
+ */
+/**
+ * @brief CRC HAL State Structure definition
+ */
+typedef enum
+{
+ HAL_CRC_STATE_RESET = 0x00, /*!< CRC not yet initialized or disabled */
+ HAL_CRC_STATE_READY = 0x01, /*!< CRC initialized and ready for use */
+ HAL_CRC_STATE_BUSY = 0x02, /*!< CRC internal process is ongoing */
+ HAL_CRC_STATE_TIMEOUT = 0x03, /*!< CRC timeout state */
+ HAL_CRC_STATE_ERROR = 0x04 /*!< CRC error state */
+}HAL_CRC_StateTypeDef;
+
+
+/**
+ * @brief CRC Init Structure definition
+ */
+typedef struct
+{
+ uint8_t DefaultPolynomialUse; /*!< This parameter is a value of @ref CRC_Default_Polynomial and indicates if default polynomial is used.
+ If set to DEFAULT_POLYNOMIAL_ENABLE, resort to default
+ X^32 + X^26 + X^23 + X^22 + X^16 + X^12 + X^11 + X^10 +X^8 + X^7 + X^5 + X^4 + X^2+ X +1.
+ In that case, there is no need to set GeneratingPolynomial field.
+ If otherwise set to DEFAULT_POLYNOMIAL_DISABLE, GeneratingPolynomial and CRCLength fields must be set */
+
+ uint8_t DefaultInitValueUse; /*!< This parameter is a value of @ref CRC_Default_InitValue_Use and indicates if default init value is used.
+ If set to DEFAULT_INIT_VALUE_ENABLE, resort to default
+ 0xFFFFFFFF value. In that case, there is no need to set InitValue field.
+ If otherwise set to DEFAULT_INIT_VALUE_DISABLE, InitValue field must be set */
+
+ uint32_t GeneratingPolynomial; /*!< Set CRC generating polynomial. 7, 8, 16 or 32-bit long value for a polynomial degree
+ respectively equal to 7, 8, 16 or 32. This field is written in normal representation,
+ e.g., for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 is written 0x65.
+ No need to specify it if DefaultPolynomialUse is set to DEFAULT_POLYNOMIAL_ENABLE */
+
+ uint32_t CRCLength; /*!< This parameter is a value of @ref CRCEx_Polynomial_Sizes and indicates CRC length.
+ Value can be either one of
+ CRC_POLYLENGTH_32B (32-bit CRC)
+ CRC_POLYLENGTH_16B (16-bit CRC)
+ CRC_POLYLENGTH_8B (8-bit CRC)
+ CRC_POLYLENGTH_7B (7-bit CRC) */
+
+ uint32_t InitValue; /*!< Init value to initiate CRC computation. No need to specify it if DefaultInitValueUse
+ is set to DEFAULT_INIT_VALUE_ENABLE */
+
+ uint32_t InputDataInversionMode; /*!< This parameter is a value of @ref CRCEx_Input_Data_Inversion and specifies input data inversion mode.
+ Can be either one of the following values
+ CRC_INPUTDATA_INVERSION_NONE no input data inversion
+ CRC_INPUTDATA_INVERSION_BYTE byte-wise inversion, 0x1A2B3C4D becomes 0x58D43CB2
+ CRC_INPUTDATA_INVERSION_HALFWORD halfword-wise inversion, 0x1A2B3C4D becomes 0xD458B23C
+ CRC_INPUTDATA_INVERSION_WORD word-wise inversion, 0x1A2B3C4D becomes 0xB23CD458 */
+
+ uint32_t OutputDataInversionMode; /*!< This parameter is a value of @ref CRCEx_Output_Data_Inversion and specifies output data (i.e. CRC) inversion mode.
+ Can be either
+ CRC_OUTPUTDATA_INVERSION_DISABLED no CRC inversion, or
+ CRC_OUTPUTDATA_INVERSION_ENABLED CRC 0x11223344 is converted into 0x22CC4488 */
+}CRC_InitTypeDef;
+
+
+/**
+ * @brief CRC Handle Structure definition
+ */
+typedef struct
+{
+ CRC_TypeDef *Instance; /*!< Register base address */
+
+ CRC_InitTypeDef Init; /*!< CRC configuration parameters */
+
+ HAL_LockTypeDef Lock; /*!< CRC Locking object */
+
+ __IO HAL_CRC_StateTypeDef State; /*!< CRC communication state */
+
+ uint32_t InputDataFormat; /*!< This parameter is a value of @ref CRC_Input_Buffer_Format and specifies input data format.
+ Can be either
+ CRC_INPUTDATA_FORMAT_BYTES input data is a stream of bytes (8-bit data)
+ CRC_INPUTDATA_FORMAT_HALFWORDS input data is a stream of half-words (16-bit data)
+ CRC_INPUTDATA_FORMAT_WORDS input data is a stream of words (32-bits data)
+ Note that constant CRC_INPUT_FORMAT_UNDEFINED is defined but an initialization error
+ must occur if InputBufferFormat is not one of the three values listed above */
+}CRC_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup CRC_Exported_Constants CRC Exported Constants
+ * @{
+ */
+/** @defgroup CRC_Default_Polynomial_Value Default CRC generating polynomial
+ * @{
+ */
+#define DEFAULT_CRC32_POLY 0x04C11DB7
+
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Default_InitValue Default CRC computation initialization value
+ * @{
+ */
+#define DEFAULT_CRC_INITVALUE 0xFFFFFFFF
+
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Default_Polynomial Indicates whether or not default polynomial is used
+ * @{
+ */
+#define DEFAULT_POLYNOMIAL_ENABLE ((uint8_t)0x00)
+#define DEFAULT_POLYNOMIAL_DISABLE ((uint8_t)0x01)
+
+#define IS_DEFAULT_POLYNOMIAL(DEFAULT) (((DEFAULT) == DEFAULT_POLYNOMIAL_ENABLE) || \
+ ((DEFAULT) == DEFAULT_POLYNOMIAL_DISABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Default_InitValue_Use Indicates whether or not default init value is used
+ * @{
+ */
+#define DEFAULT_INIT_VALUE_ENABLE ((uint8_t)0x00)
+#define DEFAULT_INIT_VALUE_DISABLE ((uint8_t)0x01)
+
+#define IS_DEFAULT_INIT_VALUE(VALUE) (((VALUE) == DEFAULT_INIT_VALUE_ENABLE) || \
+ ((VALUE) == DEFAULT_INIT_VALUE_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Input_Buffer_Format Input Buffer Format
+ * @{
+ */
+/* WARNING: CRC_INPUT_FORMAT_UNDEFINED is created for reference purposes but
+ * an error is triggered in HAL_CRC_Init() if InputDataFormat field is set
+ * to CRC_INPUT_FORMAT_UNDEFINED: the format MUST be defined by the user for
+ * the CRC APIs to provide a correct result */
+#define CRC_INPUTDATA_FORMAT_UNDEFINED ((uint32_t)0x00000000)
+#define CRC_INPUTDATA_FORMAT_BYTES ((uint32_t)0x00000001)
+#define CRC_INPUTDATA_FORMAT_HALFWORDS ((uint32_t)0x00000002)
+#define CRC_INPUTDATA_FORMAT_WORDS ((uint32_t)0x00000003)
+
+#define IS_CRC_INPUTDATA_FORMAT(FORMAT) (((FORMAT) == CRC_INPUTDATA_FORMAT_BYTES) || \
+ ((FORMAT) == CRC_INPUTDATA_FORMAT_HALFWORDS) || \
+ ((FORMAT) == CRC_INPUTDATA_FORMAT_WORDS))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @defgroup CRC_Exported_Macros CRC Exported Macros
+ * @{
+ */
+
+/** @brief Reset CRC handle state
+ * @param __HANDLE__: CRC handle.
+ * @retval None
+ */
+#define __HAL_CRC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CRC_STATE_RESET)
+
+/**
+ * @brief Reset CRC Data Register.
+ * @param __HANDLE__: CRC handle
+ * @retval None.
+ */
+#define __HAL_CRC_DR_RESET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRC_CR_RESET)
+
+/**
+ * @brief Set CRC INIT non-default value
+ * @param __HANDLE__ : CRC handle
+ * @param __INIT__ : 32-bit initial value
+ * @retval None.
+ */
+#define __HAL_CRC_INITIALCRCVALUE_CONFIG(__HANDLE__, __INIT__) ((__HANDLE__)->Instance->INIT = (__INIT__))
+
+/**
+ * @}
+ */
+
+
+/* Include CRC HAL Extension module */
+#include "stm32f0xx_hal_crc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CRC_Exported_Functions CRC Exported Functions
+ * @{
+ */
+
+/** @addtogroup CRC_Exported_Functions_Group1 Initialization/de-initialization functions
+ * @brief Initialization and Configuration functions.
+ * @{
+ */
+
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_CRC_Init(CRC_HandleTypeDef *hcrc);
+HAL_StatusTypeDef HAL_CRC_DeInit (CRC_HandleTypeDef *hcrc);
+void HAL_CRC_MspInit(CRC_HandleTypeDef *hcrc);
+void HAL_CRC_MspDeInit(CRC_HandleTypeDef *hcrc);
+/**
+ * @}
+ */
+
+/** @addtogroup CRC_Exported_Functions_Group2 Peripheral Control functions
+ * @brief management functions.
+ * @{
+ */
+
+/* Peripheral Control functions ***********************************************/
+uint32_t HAL_CRC_Accumulate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength);
+uint32_t HAL_CRC_Calculate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength);
+/**
+ * @}
+ */
+
+/** @addtogroup CRC_Exported_Functions_Group3 Peripheral State functions
+ * @brief Peripheral State functions.
+ * @{
+ */
+/* Peripheral State and Error functions ***************************************/
+HAL_CRC_StateTypeDef HAL_CRC_GetState(CRC_HandleTypeDef *hcrc);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup CRC_Exported_Constants CRC Exported Constants
+ * @brief aliases for inter STM32 series compatibility
+ * @{
+ */
+/** @defgroup CRC_Aliases Aliases for inter STM32 series compatibility
+ * @{
+ */
+/* Aliases for inter STM32 series compatibility */
+#define HAL_CRC_Input_Data_Reverse HAL_CRCEx_Input_Data_Reverse
+#define HAL_CRC_Output_Data_Reverse HAL_CRCEx_Output_Data_Reverse
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_CRC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/include/stm32f0xx_hal_crc_ex.h b/f0/include/stm32f0xx_hal_crc_ex.h
new file mode 100755
index 0000000000000000000000000000000000000000..0b53e63787e61c76114bd1fb65d76ce8d4a01653
--- /dev/null
+++ b/f0/include/stm32f0xx_hal_crc_ex.h
@@ -0,0 +1,202 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_crc_ex.h
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief Header file of CRC HAL extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_CRC_EX_H
+#define __STM32F0xx_HAL_CRC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CRCEx CRCEx Extended HAL Module Driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup CRCEx_Exported_Constants CRCEx Exported Constants
+ * @{
+ */
+/** @defgroup CRCEx_Input_Data_Inversion Input Data Inversion Modes
+ * @{
+ */
+#define CRC_INPUTDATA_INVERSION_NONE ((uint32_t)0x00000000)
+#define CRC_INPUTDATA_INVERSION_BYTE ((uint32_t)CRC_CR_REV_IN_0)
+#define CRC_INPUTDATA_INVERSION_HALFWORD ((uint32_t)CRC_CR_REV_IN_1)
+#define CRC_INPUTDATA_INVERSION_WORD ((uint32_t)CRC_CR_REV_IN)
+
+#define IS_CRC_INPUTDATA_INVERSION_MODE(MODE) (((MODE) == CRC_INPUTDATA_INVERSION_NONE) || \
+ ((MODE) == CRC_INPUTDATA_INVERSION_BYTE) || \
+ ((MODE) == CRC_INPUTDATA_INVERSION_HALFWORD) || \
+ ((MODE) == CRC_INPUTDATA_INVERSION_WORD))
+/**
+ * @}
+ */
+
+/** @defgroup CRCEx_Output_Data_Inversion Output Data Inversion Modes
+ * @{
+ */
+#define CRC_OUTPUTDATA_INVERSION_DISABLED ((uint32_t)0x00000000)
+#define CRC_OUTPUTDATA_INVERSION_ENABLED ((uint32_t)CRC_CR_REV_OUT)
+
+#define IS_CRC_OUTPUTDATA_INVERSION_MODE(MODE) (((MODE) == CRC_OUTPUTDATA_INVERSION_DISABLED) || \
+ ((MODE) == CRC_OUTPUTDATA_INVERSION_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup CRCEx_Polynomial_Sizes Polynomial sizes to configure the IP
+ * @{
+ */
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#define CRC_POLYLENGTH_32B ((uint32_t)0x00000000)
+#define CRC_POLYLENGTH_16B ((uint32_t)CRC_CR_POLYSIZE_0)
+#define CRC_POLYLENGTH_8B ((uint32_t)CRC_CR_POLYSIZE_1)
+#define CRC_POLYLENGTH_7B ((uint32_t)CRC_CR_POLYSIZE)
+#define IS_CRC_POL_LENGTH(LENGTH) (((LENGTH) == CRC_POLYLENGTH_32B) || \
+ ((LENGTH) == CRC_POLYLENGTH_16B) || \
+ ((LENGTH) == CRC_POLYLENGTH_8B) || \
+ ((LENGTH) == CRC_POLYLENGTH_7B))
+#else
+#define CRC_POLYLENGTH_32B ((uint32_t)0x00000000)
+#define IS_CRC_POL_LENGTH(LENGTH) ((LENGTH) == CRC_POLYLENGTH_32B)
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) */
+/**
+ * @}
+ */
+
+/** @defgroup CRCEx_Polynomial_Size_Definitions CRC polynomial possible sizes actual definitions
+ * @{
+ */
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#define HAL_CRC_LENGTH_32B 32
+#define HAL_CRC_LENGTH_16B 16
+#define HAL_CRC_LENGTH_8B 8
+#define HAL_CRC_LENGTH_7B 7
+#else
+#define HAL_CRC_LENGTH_32B 32
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup CRCEx_Exported_Macros CRCEx Exported Macros
+ * @{
+ */
+
+/**
+ * @brief Set CRC output reversal
+ * @param __HANDLE__ : CRC handle
+ * @retval None.
+ */
+#define __HAL_CRC_OUTPUTREVERSAL_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRC_CR_REV_OUT)
+
+/**
+ * @brief Unset CRC output reversal
+ * @param __HANDLE__ : CRC handle
+ * @retval None.
+ */
+#define __HAL_CRC_OUTPUTREVERSAL_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(CRC_CR_REV_OUT))
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
+/**
+ * @brief Set CRC non-default polynomial
+ * @param __HANDLE__ : CRC handle
+ * @param __POLYNOMIAL__: 7, 8, 16 or 32-bit polynomial
+ * @retval None.
+ */
+#define __HAL_CRC_POLYNOMIAL_CONFIG(__HANDLE__, __POLYNOMIAL__) ((__HANDLE__)->Instance->POL = (__POLYNOMIAL__))
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CRCEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup CRCEx_Exported_Functions_Group1 Extended Initialization/de-initialization functions
+ * @brief Extended Initialization and Configuration functions.
+ * @{
+ */
+
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_CRCEx_Init(CRC_HandleTypeDef *hcrc);
+HAL_StatusTypeDef HAL_CRCEx_Input_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t InputReverseMode);
+HAL_StatusTypeDef HAL_CRCEx_Output_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t OutputReverseMode);
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
+HAL_StatusTypeDef HAL_CRCEx_Polynomial_Set(CRC_HandleTypeDef *hcrc, uint32_t Pol, uint32_t PolyLength);
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
+/**
+ * @}
+ */
+/* Peripheral Control functions ***********************************************/
+/* Peripheral State and Error functions ***************************************/
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_CRC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/include/stm32f0xx_hal_dac.h b/f0/include/stm32f0xx_hal_dac.h
new file mode 100755
index 0000000000000000000000000000000000000000..6b9facac610bfc5026718a078f850cab5e680651
--- /dev/null
+++ b/f0/include/stm32f0xx_hal_dac.h
@@ -0,0 +1,354 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_dac.h
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief Header file of DAC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_DAC_H
+#define __STM32F0xx_HAL_DAC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DAC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup DAC_Exported_Types DAC Exported Types
+ * @{
+ */
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_DAC_STATE_RESET = 0x00, /*!< DAC not yet initialized or disabled */
+ HAL_DAC_STATE_READY = 0x01, /*!< DAC initialized and ready for use */
+ HAL_DAC_STATE_BUSY = 0x02, /*!< DAC internal processing is ongoing */
+ HAL_DAC_STATE_TIMEOUT = 0x03, /*!< DAC timeout state */
+ HAL_DAC_STATE_ERROR = 0x04 /*!< DAC error state */
+
+}HAL_DAC_StateTypeDef;
+
+/**
+ * @brief DAC handle Structure definition
+ */
+typedef struct
+{
+ DAC_TypeDef *Instance; /*!< Register base address */
+
+ __IO HAL_DAC_StateTypeDef State; /*!< DAC communication state */
+
+ HAL_LockTypeDef Lock; /*!< DAC locking object */
+
+ DMA_HandleTypeDef *DMA_Handle1; /*!< Pointer DMA handler for channel 1 */
+
+ DMA_HandleTypeDef *DMA_Handle2; /*!< Pointer DMA handler for channel 2 */
+
+ __IO uint32_t ErrorCode; /*!< DAC Error code */
+
+}DAC_HandleTypeDef;
+
+/**
+ * @brief DAC Configuration regular Channel structure definition
+ */
+typedef struct
+{
+ uint32_t DAC_Trigger; /*!< Specifies the external trigger for the selected DAC channel.
+ This parameter can be a value of @ref DAC_trigger_selection */
+
+ uint32_t DAC_OutputBuffer; /*!< Specifies whether the DAC channel output buffer is enabled or disabled.
+ This parameter can be a value of @ref DAC_output_buffer */
+
+}DAC_ChannelConfTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup DAC_Exported_Constants DAC Exported Constants
+ * @{
+ */
+
+/** @defgroup DAC_Error_Code DAC Error Code
+ * @{
+ */
+#define HAL_DAC_ERROR_NONE 0x00 /*!< No error */
+#define HAL_DAC_ERROR_DMAUNDERRUNCH1 0x01 /*!< DAC channel1 DAM underrun error */
+#define HAL_DAC_ERROR_DMAUNDERRUNCH2 0x02 /*!< DAC channel2 DAM underrun error */
+#define HAL_DAC_ERROR_DMA 0x04 /*!< DMA error */
+/**
+ * @}
+ */
+
+/** @defgroup DAC_output_buffer DAC output buffer
+ * @{
+ */
+#define DAC_OUTPUTBUFFER_ENABLE ((uint32_t)0x00000000)
+#define DAC_OUTPUTBUFFER_DISABLE ((uint32_t)DAC_CR_BOFF1)
+
+#define IS_DAC_OUTPUT_BUFFER_STATE(STATE) (((STATE) == DAC_OUTPUTBUFFER_ENABLE) || \
+ ((STATE) == DAC_OUTPUTBUFFER_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup DAC_data_alignement DAC data alignement
+ * @{
+ */
+#define DAC_ALIGN_12B_R ((uint32_t)0x00000000)
+#define DAC_ALIGN_12B_L ((uint32_t)0x00000004)
+#define DAC_ALIGN_8B_R ((uint32_t)0x00000008)
+
+#define IS_DAC_ALIGN(ALIGN) (((ALIGN) == DAC_ALIGN_12B_R) || \
+ ((ALIGN) == DAC_ALIGN_12B_L) || \
+ ((ALIGN) == DAC_ALIGN_8B_R))
+/**
+ * @}
+ */
+
+/** @defgroup DAC_data DAC data
+ * @{
+ */
+#define IS_DAC_DATA(DATA) ((DATA) <= 0xFFF0)
+/**
+ * @}
+ */
+
+/** @defgroup DAC_flags_definition DAC flags definition
+ * @{
+ */
+#define DAC_FLAG_DMAUDR1 ((uint32_t)DAC_SR_DMAUDR1)
+#define DAC_FLAG_DMAUDR2 ((uint32_t)DAC_SR_DMAUDR2)
+/**
+ * @}
+ */
+
+/** @defgroup DAC_IT_definition DAC IT definition
+ * @{
+ */
+#define DAC_IT_DMAUDR1 ((uint32_t)DAC_SR_DMAUDR1)
+#define DAC_IT_DMAUDR2 ((uint32_t)DAC_SR_DMAUDR2)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup DAC_Exported_Macros DAC Exported Macros
+ * @{
+ */
+
+/** @brief Reset DAC handle state
+ * @param __HANDLE__: specifies the DAC handle.
+ * @retval None
+ */
+#define __HAL_DAC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DAC_STATE_RESET)
+
+/** @brief Enable the DAC channel
+ * @param __HANDLE__: specifies the DAC handle.
+ * @param __DAC_Channel__: specifies the DAC channel
+ * @retval None
+ */
+#define __HAL_DAC_ENABLE(__HANDLE__, __DAC_Channel__) \
+((__HANDLE__)->Instance->CR |= (DAC_CR_EN1 << (__DAC_Channel__)))
+
+/** @brief Disable the DAC channel
+ * @param __HANDLE__: specifies the DAC handle
+ * @param __DAC_Channel__: specifies the DAC channel.
+ * @retval None
+ */
+#define __HAL_DAC_DISABLE(__HANDLE__, __DAC_Channel__) \
+((__HANDLE__)->Instance->CR &= ~(DAC_CR_EN1 << (__DAC_Channel__)))
+
+/** @brief Set DHR12R1 alignment
+ * @param __ALIGNEMENT__: specifies the DAC alignement
+ * @retval None
+ */
+#define __HAL_DHR12R1_ALIGNEMENT(__ALIGNEMENT__) (((uint32_t)0x00000008) + (__ALIGNEMENT__))
+
+/** @brief Set DHR12R2 alignment
+ * @param __ALIGNEMENT__: specifies the DAC alignement
+ * @retval None
+ */
+#define __HAL_DHR12R2_ALIGNEMENT(__ALIGNEMENT__) (((uint32_t)0x00000014) + (__ALIGNEMENT__))
+
+/** @brief Set DHR12RD alignment
+ * @param __ALIGNEMENT__: specifies the DAC alignement
+ * @retval None
+ */
+#define __HAL_DHR12RD_ALIGNEMENT(__ALIGNEMENT__) (((uint32_t)0x00000020) + (__ALIGNEMENT__))
+
+/** @brief Enable the DAC interrupt
+ * @param __HANDLE__: specifies the DAC handle
+ * @param __INTERRUPT__: specifies the DAC interrupt.
+ * @retval None
+ */
+#define __HAL_DAC_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) |= (__INTERRUPT__))
+
+/** @brief Disable the DAC interrupt
+ * @param __HANDLE__: specifies the DAC handle
+ * @param __INTERRUPT__: specifies the DAC interrupt.
+ * @retval None
+ */
+#define __HAL_DAC_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) &= ~(__INTERRUPT__))
+
+/** @brief Get the selected DAC's flag status.
+ * @param __HANDLE__: specifies the DAC handle.
+ * @param __FLAG__: specifies the FLAG.
+ * @retval None
+ */
+#define __HAL_DAC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the DAC's flag.
+ * @param __HANDLE__: specifies the DAC handle.
+ * @param __FLAG__: specifies the FLAG.
+ * @retval None
+ */
+#define __HAL_DAC_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = (__FLAG__))
+
+/**
+ * @}
+ */
+
+
+/* Include DAC HAL Extension module */
+#include "stm32f0xx_hal_dac_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup DAC_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup DAC_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_DAC_Init(DAC_HandleTypeDef* hdac);
+HAL_StatusTypeDef HAL_DAC_DeInit(DAC_HandleTypeDef* hdac);
+void HAL_DAC_MspInit(DAC_HandleTypeDef* hdac);
+void HAL_DAC_MspDeInit(DAC_HandleTypeDef* hdac);
+
+/**
+ * @}
+ */
+
+/** @addtogroup DAC_Exported_Functions_Group2
+ * @{
+ */
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_DAC_Start(DAC_HandleTypeDef* hdac, uint32_t Channel);
+HAL_StatusTypeDef HAL_DAC_Stop(DAC_HandleTypeDef* hdac, uint32_t Channel);
+HAL_StatusTypeDef HAL_DAC_Start_DMA(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t* pData, uint32_t Length, uint32_t Alignment);
+HAL_StatusTypeDef HAL_DAC_Stop_DMA(DAC_HandleTypeDef* hdac, uint32_t Channel);
+
+void HAL_DAC_ConvCpltCallbackCh1(DAC_HandleTypeDef* hdac);
+void HAL_DAC_ConvHalfCpltCallbackCh1(DAC_HandleTypeDef* hdac);
+void HAL_DAC_ErrorCallbackCh1(DAC_HandleTypeDef *hdac);
+void HAL_DAC_DMAUnderrunCallbackCh1(DAC_HandleTypeDef *hdac);
+/**
+ * @}
+ */
+
+/** @addtogroup DAC_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_DAC_ConfigChannel(DAC_HandleTypeDef* hdac, DAC_ChannelConfTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_DAC_SetValue(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Alignment, uint32_t Data);
+uint32_t HAL_DAC_GetValue(DAC_HandleTypeDef* hdac, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup DAC_Exported_Functions_Group4
+ * @{
+ */
+/* Peripheral State and Error functions ***************************************/
+HAL_DAC_StateTypeDef HAL_DAC_GetState(DAC_HandleTypeDef* hdac);
+void HAL_DAC_IRQHandler(DAC_HandleTypeDef* hdac);
+uint32_t HAL_DAC_GetError(DAC_HandleTypeDef *hdac);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /*__STM32F0xx_HAL_DAC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/include/stm32f0xx_hal_dac_ex.h b/f0/include/stm32f0xx_hal_dac_ex.h
new file mode 100755
index 0000000000000000000000000000000000000000..eb6262699f4e49863b02fece5b7575ddcd369c51
--- /dev/null
+++ b/f0/include/stm32f0xx_hal_dac_ex.h
@@ -0,0 +1,297 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_dac_ex.h
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief Header file of DAC HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_DAC_EX_H
+#define __STM32F0xx_HAL_DAC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DACEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief HAL State structures definition
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup DACEx_Exported_Constants DACEx Exported Constants
+ * @{
+ */
+/** @defgroup DACEx_wave_generation DACEx wave generation
+ * @{
+ */
+#define DAC_WAVEGENERATION_NONE ((uint32_t)0x00000000)
+#define DAC_WAVEGENERATION_NOISE ((uint32_t)DAC_CR_WAVE1_0)
+#define DAC_WAVEGENERATION_TRIANGLE ((uint32_t)DAC_CR_WAVE1_1)
+
+#define IS_DAC_GENERATE_WAVE(WAVE) (((WAVE) == DAC_WAVEGENERATION_NONE) || \
+ ((WAVE) == DAC_WAVEGENERATION_NOISE) || \
+ ((WAVE) == DAC_WAVEGENERATION_TRIANGLE))
+/**
+ * @}
+ */
+
+/** @defgroup DACEx_lfsrunmask_triangleamplitude DACEx lfsrunmask triangleamplitude
+ * @{
+ */
+#define DAC_LFSRUNMASK_BIT0 ((uint32_t)0x00000000) /*!< Unmask DAC channel LFSR bit0 for noise wave generation */
+#define DAC_LFSRUNMASK_BITS1_0 ((uint32_t)DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[1:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS2_0 ((uint32_t)DAC_CR_MAMP1_1) /*!< Unmask DAC channel LFSR bit[2:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS3_0 ((uint32_t)DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0)/*!< Unmask DAC channel LFSR bit[3:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS4_0 ((uint32_t)DAC_CR_MAMP1_2) /*!< Unmask DAC channel LFSR bit[4:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS5_0 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[5:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS6_0 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1) /*!< Unmask DAC channel LFSR bit[6:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS7_0 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[7:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS8_0 ((uint32_t)DAC_CR_MAMP1_3) /*!< Unmask DAC channel LFSR bit[8:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS9_0 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[9:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS10_0 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1) /*!< Unmask DAC channel LFSR bit[10:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS11_0 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[11:0] for noise wave generation */
+#define DAC_TRIANGLEAMPLITUDE_1 ((uint32_t)0x00000000) /*!< Select max triangle amplitude of 1 */
+#define DAC_TRIANGLEAMPLITUDE_3 ((uint32_t)DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 3 */
+#define DAC_TRIANGLEAMPLITUDE_7 ((uint32_t)DAC_CR_MAMP1_1) /*!< Select max triangle amplitude of 7 */
+#define DAC_TRIANGLEAMPLITUDE_15 ((uint32_t)DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 15 */
+#define DAC_TRIANGLEAMPLITUDE_31 ((uint32_t)DAC_CR_MAMP1_2) /*!< Select max triangle amplitude of 31 */
+#define DAC_TRIANGLEAMPLITUDE_63 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 63 */
+#define DAC_TRIANGLEAMPLITUDE_127 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1) /*!< Select max triangle amplitude of 127 */
+#define DAC_TRIANGLEAMPLITUDE_255 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 255 */
+#define DAC_TRIANGLEAMPLITUDE_511 ((uint32_t)DAC_CR_MAMP1_3) /*!< Select max triangle amplitude of 511 */
+#define DAC_TRIANGLEAMPLITUDE_1023 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 1023 */
+#define DAC_TRIANGLEAMPLITUDE_2047 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1) /*!< Select max triangle amplitude of 2047 */
+#define DAC_TRIANGLEAMPLITUDE_4095 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 4095 */
+
+#define IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(VALUE) (((VALUE) == DAC_LFSRUNMASK_BIT0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS1_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS2_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS3_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS4_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS5_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS6_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS7_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS8_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS9_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS10_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS11_0) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_1) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_3) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_7) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_15) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_31) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_63) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_127) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_255) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_511) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_1023) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_2047) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_4095))
+/**
+ * @}
+ */
+
+/** @defgroup DACEx_wave_generationbis DACEx wave generation bis
+ * @{
+ */
+#define DAC_WAVE_NOISE ((uint32_t)DAC_CR_WAVE1_0)
+#define DAC_WAVE_TRIANGLE ((uint32_t)DAC_CR_WAVE1_1)
+
+#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_WAVE_NOISE) || \
+ ((WAVE) == DAC_WAVE_TRIANGLE))
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup DACEx_Exported_Macros DACEx Exported Macros
+ * @{
+ */
+
+/** @defgroup DAC_trigger_selection DAC trigger selection
+ * @{
+ */
+#if defined(STM32F051x8) || defined(STM32F058xx)
+
+#define DAC_TRIGGER_NONE ((uint32_t)0x00000000) /*!< Conversion is automatic once the DAC1_DHRxxxx register
+ has been loaded, and not by external trigger */
+#define DAC_TRIGGER_T2_TRGO ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TEN1)) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T3_TRGO ((uint32_t)(DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM3 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T6_TRGO ((uint32_t)DAC_CR_TEN1) /*!< TIM6 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T15_TRGO ((uint32_t)(DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM15 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_EXT_IT9 ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_SOFTWARE ((uint32_t)(DAC_CR_TSEL1 | DAC_CR_TEN1)) /*!< Conversion started by software trigger for DAC channel */
+
+#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_TRIGGER_NONE) || \
+ ((TRIGGER) == DAC_TRIGGER_T2_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T3_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T6_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T15_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_EXT_IT9) || \
+ ((TRIGGER) == DAC_TRIGGER_SOFTWARE))
+
+#endif /* STM32F051x8 || STM32F058xx */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+#define DAC_TRIGGER_NONE ((uint32_t)0x00000000) /*!< Conversion is automatic once the DAC1_DHRxxxx register
+ has been loaded, and not by external trigger */
+#define DAC_TRIGGER_T2_TRGO ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TEN1)) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T3_TRGO ((uint32_t)(DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM3 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T6_TRGO ((uint32_t)DAC_CR_TEN1) /*!< TIM6 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T7_TRGO ((uint32_t)(DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< TIM7 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T15_TRGO ((uint32_t)(DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM15 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_EXT_IT9 ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_SOFTWARE ((uint32_t)(DAC_CR_TSEL1 | DAC_CR_TEN1)) /*!< Conversion started by software trigger for DAC channel */
+
+#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_TRIGGER_NONE) || \
+ ((TRIGGER) == DAC_TRIGGER_T2_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T3_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T6_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T7_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T15_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_EXT_IT9) || \
+ ((TRIGGER) == DAC_TRIGGER_SOFTWARE))
+
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+/**
+ * @}
+ */
+
+/** @defgroup DAC_Channel_selection DAC Channel selection
+ * @{
+ */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+#define DAC_CHANNEL_1 ((uint32_t)0x00000000)
+#define DAC_CHANNEL_2 ((uint32_t)0x00000010)
+
+#define IS_DAC_CHANNEL(CHANNEL) (((CHANNEL) == DAC_CHANNEL_1) || \
+ ((CHANNEL) == DAC_CHANNEL_2))
+
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F051x8) || defined(STM32F058xx)
+
+#define DAC_CHANNEL_1 ((uint32_t)0x00000000)
+#define IS_DAC_CHANNEL(CHANNEL) (((CHANNEL) == DAC_CHANNEL_1))
+
+#endif /* STM32F051x8 || STM32F058xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/* Extension features functions ***********************************************/
+
+/** @addtogroup DACEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup DACEx_Exported_Functions_Group1 Extended features functions
+ * @brief Extended features functions
+ * @{
+ */
+
+uint32_t HAL_DACEx_DualGetValue(DAC_HandleTypeDef* hdac);
+HAL_StatusTypeDef HAL_DACEx_TriangleWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Amplitude);
+HAL_StatusTypeDef HAL_DACEx_NoiseWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Amplitude);
+HAL_StatusTypeDef HAL_DACEx_DualSetValue(DAC_HandleTypeDef* hdac, uint32_t Alignment, uint32_t Data1, uint32_t Data2);
+
+void HAL_DACEx_ConvCpltCallbackCh2(DAC_HandleTypeDef* hdac);
+void HAL_DACEx_ConvHalfCpltCallbackCh2(DAC_HandleTypeDef* hdac);
+void HAL_DACEx_ErrorCallbackCh2(DAC_HandleTypeDef* hdac);
+void HAL_DACEx_DMAUnderrunCallbackCh2(DAC_HandleTypeDef* hdac);
+
+void DAC_DMAConvCpltCh2(DMA_HandleTypeDef *hdma);
+void DAC_DMAErrorCh2(DMA_HandleTypeDef *hdma);
+void DAC_DMAHalfConvCpltCh2(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+#endif /* */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#endif /*__STM32F0xx_HAL_DAC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/include/stm32f0xx_hal_def.h b/f0/include/stm32f0xx_hal_def.h
new file mode 100755
index 0000000000000000000000000000000000000000..f342c2d7e6591944f3985512578bac672e68c511
--- /dev/null
+++ b/f0/include/stm32f0xx_hal_def.h
@@ -0,0 +1,183 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_def.h
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief This file contains HAL common defines, enumeration, macros and
+ * structures definitions.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_DEF
+#define __STM32F0xx_HAL_DEF
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx.h"
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief HAL Status structures definition
+ */
+typedef enum
+{
+ HAL_OK = 0x00,
+ HAL_ERROR = 0x01,
+ HAL_BUSY = 0x02,
+ HAL_TIMEOUT = 0x03
+} HAL_StatusTypeDef;
+
+/**
+ * @brief HAL Lock structures definition
+ */
+typedef enum
+{
+ HAL_UNLOCKED = 0x00,
+ HAL_LOCKED = 0x01
+} HAL_LockTypeDef;
+
+/* Exported macro ------------------------------------------------------------*/
+#ifndef NULL
+ #define NULL 0
+#endif
+
+#define HAL_MAX_DELAY 0xFFFFFFFF
+
+#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) != RESET)
+#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == RESET)
+
+#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD_, __DMA_HANDLE_) \
+ do{ \
+ (__HANDLE__)->__PPP_DMA_FIELD_ = &(__DMA_HANDLE_); \
+ (__DMA_HANDLE_).Parent = (__HANDLE__); \
+ } while(0)
+
+#define UNUSED(x) ((void)(x))
+
+/** @brief Reset the Handle's State field.
+ * @param __HANDLE__: specifies the Peripheral Handle.
+ * @note This macro can be used for the following purpose:
+ * - When the Handle is declared as local variable; before passing it as parameter
+ * to HAL_PPP_Init() for the first time, it is mandatory to use this macro
+ * to set to 0 the Handle's "State" field.
+ * Otherwise, "State" field may have any random value and the first time the function
+ * HAL_PPP_Init() is called, the low level hardware initialization will be missed
+ * (i.e. HAL_PPP_MspInit() will not be executed).
+ * - When there is a need to reconfigure the low level hardware: instead of calling
+ * HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init().
+ * In this later function, when the Handle's "State" field is set to 0, it will execute the function
+ * HAL_PPP_MspInit() which will reconfigure the low level hardware.
+ * @retval None
+ */
+#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0)
+
+#if (USE_RTOS == 1)
+ #error " USE_RTOS should be 0 in the current HAL release "
+#else
+ #define __HAL_LOCK(__HANDLE__) \
+ do{ \
+ if((__HANDLE__)->Lock == HAL_LOCKED) \
+ { \
+ return HAL_BUSY; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Lock = HAL_LOCKED; \
+ } \
+ }while (0)
+
+ #define __HAL_UNLOCK(__HANDLE__) \
+ do{ \
+ (__HANDLE__)->Lock = HAL_UNLOCKED; \
+ }while (0)
+#endif /* USE_RTOS */
+
+#if defined ( __GNUC__ )
+ #ifndef __weak
+ #define __weak __attribute__((weak))
+ #endif /* __weak */
+ #ifndef __packed
+ #define __packed __attribute__((__packed__))
+ #endif /* __packed */
+#endif /* __GNUC__ */
+
+
+/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */
+#if defined (__GNUC__) /* GNU Compiler */
+ #ifndef __ALIGN_END
+ #define __ALIGN_END __attribute__ ((aligned (4)))
+ #endif /* __ALIGN_END */
+ #ifndef __ALIGN_BEGIN
+ #define __ALIGN_BEGIN
+ #endif /* __ALIGN_BEGIN */
+#else
+ #ifndef __ALIGN_END
+ #define __ALIGN_END
+ #endif /* __ALIGN_END */
+ #ifndef __ALIGN_BEGIN
+ #if defined (__CC_ARM) /* ARM Compiler */
+ #define __ALIGN_BEGIN __align(4)
+ #elif defined (__ICCARM__) /* IAR Compiler */
+ #define __ALIGN_BEGIN
+ #endif /* __CC_ARM */
+ #endif /* __ALIGN_BEGIN */
+#endif /* __GNUC__ */
+
+/**
+ * @brief __NOINLINE definition
+ */
+#if defined ( __CC_ARM ) || defined ( __GNUC__ )
+/* ARM & GNUCompiler
+ ----------------
+*/
+#define __NOINLINE __attribute__ ( (noinline) )
+
+#elif defined ( __ICCARM__ )
+/* ICCARM Compiler
+ ---------------
+*/
+#define __NOINLINE _Pragma("optimize = no_inline")
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ___STM32F0xx_HAL_DEF */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/include/stm32f0xx_hal_dma.h b/f0/include/stm32f0xx_hal_dma.h
new file mode 100755
index 0000000000000000000000000000000000000000..3300968ce4af5453e840cc5b3c4e875a327966ea
--- /dev/null
+++ b/f0/include/stm32f0xx_hal_dma.h
@@ -0,0 +1,460 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_dma.h
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief Header file of DMA HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_DMA_H
+#define __STM32F0xx_HAL_DMA_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DMA
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup DMA_Exported_Types DMA Exported Types
+ * @{
+ */
+
+/**
+ * @brief DMA Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral,
+ from memory to memory or from peripheral to memory.
+ This parameter can be a value of @ref DMA_Data_transfer_direction */
+
+ uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not.
+ This parameter can be a value of @ref DMA_Peripheral_incremented_mode */
+
+ uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not.
+ This parameter can be a value of @ref DMA_Memory_incremented_mode */
+
+ uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width.
+ This parameter can be a value of @ref DMA_Peripheral_data_size */
+
+ uint32_t MemDataAlignment; /*!< Specifies the Memory data width.
+ This parameter can be a value of @ref DMA_Memory_data_size */
+
+ uint32_t Mode; /*!< Specifies the operation mode of the DMAy Channelx.
+ This parameter can be a value of @ref DMA_mode
+ @note The circular buffer mode cannot be used if the memory-to-memory
+ data transfer is configured on the selected Channel */
+
+ uint32_t Priority; /*!< Specifies the software priority for the DMAy Channelx.
+ This parameter can be a value of @ref DMA_Priority_level */
+
+} DMA_InitTypeDef;
+
+/**
+ * @brief DMA Configuration enumeration values definition
+ */
+typedef enum
+{
+ DMA_MODE = 0, /*!< Control related DMA mode Parameter in DMA_InitTypeDef */
+ DMA_PRIORITY = 1, /*!< Control related priority level Parameter in DMA_InitTypeDef */
+
+} DMA_ControlTypeDef;
+
+/**
+ * @brief HAL DMA State structures definition
+ */
+typedef enum
+{
+ HAL_DMA_STATE_RESET = 0x00, /*!< DMA not yet initialized or disabled */
+ HAL_DMA_STATE_READY = 0x01, /*!< DMA process success and ready for use */
+ HAL_DMA_STATE_READY_HALF = 0x11, /*!< DMA Half process success */
+ HAL_DMA_STATE_BUSY = 0x02, /*!< DMA process is ongoing */
+ HAL_DMA_STATE_TIMEOUT = 0x03, /*!< DMA timeout state */
+ HAL_DMA_STATE_ERROR = 0x04, /*!< DMA error state */
+
+}HAL_DMA_StateTypeDef;
+
+/**
+ * @brief HAL DMA Error Code structure definition
+ */
+typedef enum
+{
+ HAL_DMA_FULL_TRANSFER = 0x00, /*!< Full transfer */
+ HAL_DMA_HALF_TRANSFER = 0x01, /*!< Half Transfer */
+
+}HAL_DMA_LevelCompleteTypeDef;
+
+
+/**
+ * @brief DMA handle Structure definition
+ */
+typedef struct __DMA_HandleTypeDef
+{
+ DMA_Channel_TypeDef *Instance; /*!< Register base address */
+
+ DMA_InitTypeDef Init; /*!< DMA communication parameters */
+
+ HAL_LockTypeDef Lock; /*!< DMA locking object */
+
+ HAL_DMA_StateTypeDef State; /*!< DMA transfer state */
+
+ void *Parent; /*!< Parent object state */
+
+ void (* XferCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete callback */
+
+ void (* XferHalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA Half transfer complete callback */
+
+ void (* XferErrorCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer error callback */
+
+ __IO uint32_t ErrorCode; /*!< DMA Error code */
+
+} DMA_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup DMA_Exported_Constants DMA Exported Constants
+ * @{
+ */
+
+/** @defgroup DMA_Error_Code DMA Error Code
+ * @{
+ */
+#define HAL_DMA_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_DMA_ERROR_TE ((uint32_t)0x00000001) /*!< Transfer error */
+#define HAL_DMA_ERROR_TIMEOUT ((uint32_t)0x00000020) /*!< Timeout error */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction
+ * @{
+ */
+#define DMA_PERIPH_TO_MEMORY ((uint32_t)0x00000000) /*!< Peripheral to memory direction */
+#define DMA_MEMORY_TO_PERIPH ((uint32_t)DMA_CCR_DIR) /*!< Memory to peripheral direction */
+#define DMA_MEMORY_TO_MEMORY ((uint32_t)(DMA_CCR_MEM2MEM)) /*!< Memory to memory direction */
+
+#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \
+ ((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \
+ ((DIRECTION) == DMA_MEMORY_TO_MEMORY))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Data_buffer_size DMA Data buffer size
+ * @{
+ */
+#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1) && ((SIZE) < 0x10000))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode
+ * @{
+ */
+#define DMA_PINC_ENABLE ((uint32_t)DMA_CCR_PINC) /*!< Peripheral increment mode Enable */
+#define DMA_PINC_DISABLE ((uint32_t)0x00000000) /*!< Peripheral increment mode Disable */
+
+#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \
+ ((STATE) == DMA_PINC_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode
+ * @{
+ */
+#define DMA_MINC_ENABLE ((uint32_t)DMA_CCR_MINC) /*!< Memory increment mode Enable */
+#define DMA_MINC_DISABLE ((uint32_t)0x00000000) /*!< Memory increment mode Disable */
+
+#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \
+ ((STATE) == DMA_MINC_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size
+ * @{
+ */
+#define DMA_PDATAALIGN_BYTE ((uint32_t)0x00000000) /*!< Peripheral data alignment : Byte */
+#define DMA_PDATAALIGN_HALFWORD ((uint32_t)DMA_CCR_PSIZE_0) /*!< Peripheral data alignment : HalfWord */
+#define DMA_PDATAALIGN_WORD ((uint32_t)DMA_CCR_PSIZE_1) /*!< Peripheral data alignment : Word */
+
+#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \
+ ((SIZE) == DMA_PDATAALIGN_HALFWORD) || \
+ ((SIZE) == DMA_PDATAALIGN_WORD))
+/**
+ * @}
+ */
+
+
+/** @defgroup DMA_Memory_data_size DMA Memory data size
+ * @{
+ */
+#define DMA_MDATAALIGN_BYTE ((uint32_t)0x00000000) /*!< Memory data alignment : Byte */
+#define DMA_MDATAALIGN_HALFWORD ((uint32_t)DMA_CCR_MSIZE_0) /*!< Memory data alignment : HalfWord */
+#define DMA_MDATAALIGN_WORD ((uint32_t)DMA_CCR_MSIZE_1) /*!< Memory data alignment : Word */
+
+#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \
+ ((SIZE) == DMA_MDATAALIGN_HALFWORD) || \
+ ((SIZE) == DMA_MDATAALIGN_WORD ))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_mode DMA mode
+ * @{
+ */
+#define DMA_NORMAL ((uint32_t)0x00000000) /*!< Normal Mode */
+#define DMA_CIRCULAR ((uint32_t)DMA_CCR_CIRC) /*!< Circular Mode */
+
+#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \
+ ((MODE) == DMA_CIRCULAR))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Priority_level DMA Priority level
+ * @{
+ */
+#define DMA_PRIORITY_LOW ((uint32_t)0x00000000) /*!< Priority level : Low */
+#define DMA_PRIORITY_MEDIUM ((uint32_t)DMA_CCR_PL_0) /*!< Priority level : Medium */
+#define DMA_PRIORITY_HIGH ((uint32_t)DMA_CCR_PL_1) /*!< Priority level : High */
+#define DMA_PRIORITY_VERY_HIGH ((uint32_t)DMA_CCR_PL) /*!< Priority level : Very_High */
+
+#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \
+ ((PRIORITY) == DMA_PRIORITY_MEDIUM) || \
+ ((PRIORITY) == DMA_PRIORITY_HIGH) || \
+ ((PRIORITY) == DMA_PRIORITY_VERY_HIGH))
+/**
+ * @}
+ */
+
+
+/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions
+ * @{
+ */
+
+#define DMA_IT_TC ((uint32_t)DMA_CCR_TCIE)
+#define DMA_IT_HT ((uint32_t)DMA_CCR_HTIE)
+#define DMA_IT_TE ((uint32_t)DMA_CCR_TEIE)
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_flag_definitions DMA flag definitions
+ * @{
+ */
+
+#define DMA_FLAG_GL1 ((uint32_t)0x00000001) /*!< Channel 1 global interrupt flag */
+#define DMA_FLAG_TC1 ((uint32_t)0x00000002) /*!< Channel 1 transfer complete flag */
+#define DMA_FLAG_HT1 ((uint32_t)0x00000004) /*!< Channel 1 half transfer flag */
+#define DMA_FLAG_TE1 ((uint32_t)0x00000008) /*!< Channel 1 transfer error flag */
+#define DMA_FLAG_GL2 ((uint32_t)0x00000010) /*!< Channel 2 global interrupt flag */
+#define DMA_FLAG_TC2 ((uint32_t)0x00000020) /*!< Channel 2 transfer complete flag */
+#define DMA_FLAG_HT2 ((uint32_t)0x00000040) /*!< Channel 2 half transfer flag */
+#define DMA_FLAG_TE2 ((uint32_t)0x00000080) /*!< Channel 2 transfer error flag */
+#define DMA_FLAG_GL3 ((uint32_t)0x00000100) /*!< Channel 3 global interrupt flag */
+#define DMA_FLAG_TC3 ((uint32_t)0x00000200) /*!< Channel 3 transfer complete flag */
+#define DMA_FLAG_HT3 ((uint32_t)0x00000400) /*!< Channel 3 half transfer flag */
+#define DMA_FLAG_TE3 ((uint32_t)0x00000800) /*!< Channel 3 transfer error flag */
+#define DMA_FLAG_GL4 ((uint32_t)0x00001000) /*!< Channel 4 global interrupt flag */
+#define DMA_FLAG_TC4 ((uint32_t)0x00002000) /*!< Channel 4 transfer complete flag */
+#define DMA_FLAG_HT4 ((uint32_t)0x00004000) /*!< Channel 4 half transfer flag */
+#define DMA_FLAG_TE4 ((uint32_t)0x00008000) /*!< Channel 4 transfer error flag */
+#define DMA_FLAG_GL5 ((uint32_t)0x00010000) /*!< Channel 5 global interrupt flag */
+#define DMA_FLAG_TC5 ((uint32_t)0x00020000) /*!< Channel 5 transfer complete flag */
+#define DMA_FLAG_HT5 ((uint32_t)0x00040000) /*!< Channel 5 half transfer flag */
+#define DMA_FLAG_TE5 ((uint32_t)0x00080000) /*!< Channel 5 transfer error flag */
+#define DMA_FLAG_GL6 ((uint32_t)0x00100000) /*!< Channel 6 global interrupt flag */
+#define DMA_FLAG_TC6 ((uint32_t)0x00200000) /*!< Channel 6 transfer complete flag */
+#define DMA_FLAG_HT6 ((uint32_t)0x00400000) /*!< Channel 6 half transfer flag */
+#define DMA_FLAG_TE6 ((uint32_t)0x00800000) /*!< Channel 6 transfer error flag */
+#define DMA_FLAG_GL7 ((uint32_t)0x01000000) /*!< Channel 7 global interrupt flag */
+#define DMA_FLAG_TC7 ((uint32_t)0x02000000) /*!< Channel 7 transfer complete flag */
+#define DMA_FLAG_HT7 ((uint32_t)0x04000000) /*!< Channel 7 half transfer flag */
+#define DMA_FLAG_TE7 ((uint32_t)0x08000000) /*!< Channel 7 transfer error flag */
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup DMA_Exported_Macros DMA Exported Macros
+ * @{
+ */
+
+/** @brief Reset DMA handle state
+ * @param __HANDLE__: DMA handle.
+ * @retval None
+ */
+#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET)
+
+/**
+ * @brief Enable the specified DMA Channel.
+ * @param __HANDLE__: DMA handle
+ * @retval None.
+ */
+#define __HAL_DMA_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CCR, DMA_CCR_EN))
+
+/**
+ * @brief Disable the specified DMA Channel.
+ * @param __HANDLE__: DMA handle
+ * @retval None.
+ */
+#define __HAL_DMA_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CCR, DMA_CCR_EN))
+
+
+/* Interrupt & Flag management */
+
+/**
+ * @brief Enables the specified DMA Channel interrupts.
+ * @param __HANDLE__: DMA handle
+ * @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_IT_TC: Transfer complete interrupt mask
+ * @arg DMA_IT_HT: Half transfer complete interrupt mask
+ * @arg DMA_IT_TE: Transfer error interrupt mask
+ * @retval None
+ */
+#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) (SET_BIT((__HANDLE__)->Instance->CCR, (__INTERRUPT__)))
+
+/**
+ * @brief Disables the specified DMA Channel interrupts.
+ * @param __HANDLE__: DMA handle
+ * @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_IT_TC: Transfer complete interrupt mask
+ * @arg DMA_IT_HT: Half transfer complete interrupt mask
+ * @arg DMA_IT_TE: Transfer error interrupt mask
+ * @retval None
+ */
+#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) (CLEAR_BIT((__HANDLE__)->Instance->CCR , (__INTERRUPT__)))
+
+/**
+ * @brief Checks whether the specified DMA Channel interrupt has occurred or not.
+ * @param __HANDLE__: DMA handle
+ * @param __INTERRUPT__: specifies the DMA interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg DMA_IT_TC: Transfer complete interrupt mask
+ * @arg DMA_IT_HT: Half transfer complete interrupt mask
+ * @arg DMA_IT_TE: Transfer error interrupt mask
+ * @retval The state of DMA_IT (SET or RESET).
+ */
+#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CCR & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/**
+ * @}
+ */
+
+/* Include DMA HAL Extension module */
+#include "stm32f0xx_hal_dma_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup DMA_Exported_Functions DMA Exported Functions
+ * @{
+ */
+/** @addtogroup DMA_Exported_Functions_Group1
+ * @brief Initialization and de-initialization functions
+ * @{
+ */
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_DeInit (DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+/** @addtogroup DMA_Exported_Functions_Group2
+ * @brief I/O operation functions
+ * @{
+ */
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_DMA_Start (DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, uint32_t CompleteLevel, uint32_t Timeout);
+void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+/* Peripheral State and Error functions ***************************************/
+/** @addtogroup DMA_Exported_Functions_Group3
+ * @brief Peripheral State functions
+ * @{
+ */
+HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma);
+uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_DMA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
+
diff --git a/f0/include/stm32f0xx_hal_dma_ex.h b/f0/include/stm32f0xx_hal_dma_ex.h
new file mode 100755
index 0000000000000000000000000000000000000000..19ebd1dbff4d4d27d8049716df92f9bca1bed2c6
--- /dev/null
+++ b/f0/include/stm32f0xx_hal_dma_ex.h
@@ -0,0 +1,784 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_dma_ex.h
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief Header file of DMA HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_DMA_EX_H
+#define __STM32F0xx_HAL_DMA_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DMAEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+/** @defgroup DMAEx_Exported_Constants DMAEx Exported Constants
+ * @{
+ */
+#define DMA1_CHANNEL1_RMP 0x00000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA1_CHANNEL2_RMP 0x10000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA1_CHANNEL3_RMP 0x20000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA1_CHANNEL4_RMP 0x30000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA1_CHANNEL5_RMP 0x40000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#if !defined(STM32F030xC)
+#define DMA1_CHANNEL6_RMP 0x50000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA1_CHANNEL7_RMP 0x60000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA2_CHANNEL1_RMP 0x00000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA2_CHANNEL2_RMP 0x10000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA2_CHANNEL3_RMP 0x20000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA2_CHANNEL4_RMP 0x30000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA2_CHANNEL5_RMP 0x40000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#endif /* !defined(STM32F030xC) */
+
+/****************** DMA1 remap bit field definition********************/
+/* DMA1 - Channel 1 */
+#define HAL_DMA1_CH1_DEFAULT (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */
+#define HAL_DMA1_CH1_ADC (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_ADC) /*!< Remap ADC on DMA1 Channel 1*/
+#define HAL_DMA1_CH1_TIM17_CH1 (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_TIM17_CH1) /*!< Remap TIM17 channel 1 on DMA1 channel 1 */
+#define HAL_DMA1_CH1_TIM17_UP (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_TIM17_UP) /*!< Remap TIM17 up on DMA1 channel 1 */
+#define HAL_DMA1_CH1_USART1_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 1 */
+#define HAL_DMA1_CH1_USART2_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 1 */
+#define HAL_DMA1_CH1_USART3_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 1 */
+#define HAL_DMA1_CH1_USART4_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 1 */
+#define HAL_DMA1_CH1_USART5_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 1 */
+#define HAL_DMA1_CH1_USART6_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 1 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH1_USART7_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 1 */
+#define HAL_DMA1_CH1_USART8_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 1 */
+#endif /* !defined(STM32F030xC) */
+
+/* DMA1 - Channel 2 */
+#define HAL_DMA1_CH2_DEFAULT (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */
+#define HAL_DMA1_CH2_ADC (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_ADC) /*!< Remap ADC on DMA1 channel 2 */
+#define HAL_DMA1_CH2_I2C1_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_I2C1_TX) /*!< Remap I2C1 Tx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_SPI1_RX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_SPI1_RX) /*!< Remap SPI1 Rx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_TIM1_CH1 (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_TIM1_CH1) /*!< Remap TIM1 channel 1 on DMA1 channel 2 */
+#define HAL_DMA1_CH2_TIM17_CH1 (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_TIM17_CH1) /*!< Remap TIM17 channel 1 on DMA1 channel 2 */
+#define HAL_DMA1_CH2_TIM17_UP (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_TIM17_UP) /*!< Remap TIM17 up on DMA1 channel 2 */
+#define HAL_DMA1_CH2_USART1_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART1_TX) /*!< Remap USART1 Tx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_USART2_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART2_TX) /*!< Remap USART2 Tx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_USART3_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART3_TX) /*!< Remap USART3 Tx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_USART4_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART4_TX) /*!< Remap USART4 Tx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_USART5_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART5_TX) /*!< Remap USART5 Tx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_USART6_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART6_TX) /*!< Remap USART6 Tx on DMA1 channel 2 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH2_USART7_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART7_TX) /*!< Remap USART7 Tx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_USART8_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART8_TX) /*!< Remap USART8 Tx on DMA1 channel 2 */
+#endif /* !defined(STM32F030xC) */
+
+/* DMA1 - Channel 3 */
+#define HAL_DMA1_CH3_DEFAULT (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */
+#define HAL_DMA1_CH3_TIM6_UP (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM6_UP) /*!< Remap TIM6 up on DMA1 channel 3 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH3_DAC_CH1 (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_DAC_CH1) /*!< Remap DAC Channel 1on DMA1 channel 3 */
+#endif /* !defined(STM32F030xC) */
+#define HAL_DMA1_CH3_I2C1_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_I2C1_RX) /*!< Remap I2C1 Rx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_SPI1_TX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_SPI1_TX) /*!< Remap SPI1 Tx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_TIM1_CH2 (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM1_CH2) /*!< Remap TIM1 channel 2 on DMA1 channel 3 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH3_TIM2_CH2 (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM2_CH2) /*!< Remap TIM2 channel 2 on DMA1 channel 3 */
+#endif /* !defined(STM32F030xC) */
+#define HAL_DMA1_CH3_TIM16_CH1 (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM16_CH1) /*!< Remap TIM16 channel 1 on DMA1 channel 3 */
+#define HAL_DMA1_CH3_TIM16_UP (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM16_UP) /*!< Remap TIM16 up on DMA1 channel 3 */
+#define HAL_DMA1_CH3_USART1_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_USART2_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_USART3_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_USART4_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_USART5_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_USART6_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 3 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH3_USART7_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_USART8_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 3 */
+#endif /* !defined(STM32F030xC) */
+
+/* DMA1 - Channel 4 */
+#define HAL_DMA1_CH4_DEFAULT (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */
+#define HAL_DMA1_CH4_TIM7_UP (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM7_UP) /*!< Remap TIM7 up on DMA1 channel 4 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH4_DAC_CH2 (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_DAC_CH2) /*!< Remap DAC Channel 2 on DMA1 channel 4 */
+#endif /* !defined(STM32F030xC) */
+#define HAL_DMA1_CH4_I2C2_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_I2C2_TX) /*!< Remap I2C2 Tx on DMA1 channel 4 */
+#define HAL_DMA1_CH4_SPI2_RX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_SPI2_RX) /*!< Remap SPI2 Rx on DMA1 channel 4 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH4_TIM2_CH4 (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM2_CH4) /*!< Remap TIM2 channel 4 on DMA1 channel 4 */
+#endif /* !defined(STM32F030xC) */
+#define HAL_DMA1_CH4_TIM3_CH1 (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM3_CH1) /*!< Remap TIM3 channel 1 on DMA1 channel 4 */
+#define HAL_DMA1_CH4_TIM3_TRIG (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM3_TRIG) /*!< Remap TIM3 Trig on DMA1 channel 4 */
+#define HAL_DMA1_CH4_TIM16_CH1 (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM16_CH1) /*!< Remap TIM16 channel 1 on DMA1 channel 4 */
+#define HAL_DMA1_CH4_TIM16_UP (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM16_UP) /*!< Remap TIM16 up on DMA1 channel 4 */
+#define HAL_DMA1_CH4_USART1_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART1_TX) /*!< Remap USART1 Tx on DMA1 channel 4 */
+#define HAL_DMA1_CH4_USART2_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART2_TX) /*!< Remap USART2 Tx on DMA1 channel 4 */
+#define HAL_DMA1_CH4_USART3_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART3_TX) /*!< Remap USART3 Tx on DMA1 channel 4 */
+#define HAL_DMA1_CH4_USART4_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART4_TX) /*!< Remap USART4 Tx on DMA1 channel 4 */
+#define HAL_DMA1_CH4_USART5_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART5_TX) /*!< Remap USART5 Tx on DMA1 channel 4 */
+#define HAL_DMA1_CH4_USART6_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART6_TX) /*!< Remap USART6 Tx on DMA1 channel 4 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH4_USART7_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART7_TX) /*!< Remap USART7 Tx on DMA1 channel 4 */
+#define HAL_DMA1_CH4_USART8_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART8_TX) /*!< Remap USART8 Tx on DMA1 channel 4 */
+#endif /* !defined(STM32F030xC) */
+
+/* DMA1 - Channel 5 */
+#define HAL_DMA1_CH5_DEFAULT (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */
+#define HAL_DMA1_CH5_I2C2_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_I2C2_RX) /*!< Remap I2C2 Rx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_SPI2_TX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_SPI2_TX) /*!< Remap SPI1 Tx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_TIM1_CH3 (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_TIM1_CH3) /*!< Remap TIM1 channel 3 on DMA1 channel 5 */
+#define HAL_DMA1_CH5_USART1_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_USART2_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_USART3_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_USART4_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_USART5_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_USART6_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 5 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH5_USART7_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_USART8_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 5 */
+#endif /* !defined(STM32F030xC) */
+
+#if !defined(STM32F030xC)
+/* DMA1 - Channel 6 */
+#define HAL_DMA1_CH6_DEFAULT (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */
+#define HAL_DMA1_CH6_I2C1_TX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_I2C1_TX) /*!< Remap I2C1 Tx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_SPI2_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_SPI2_RX) /*!< Remap SPI2 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_TIM1_CH1 (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM1_CH1) /*!< Remap TIM1 channel 1 on DMA1 channel 6 */
+#define HAL_DMA1_CH6_TIM1_CH2 (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM1_CH2) /*!< Remap TIM1 channel 2 on DMA1 channel 6 */
+#define HAL_DMA1_CH6_TIM1_CH3 (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM1_CH3) /*!< Remap TIM1 channel 3 on DMA1 channel 6 */
+#define HAL_DMA1_CH6_TIM3_CH1 (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM3_CH1) /*!< Remap TIM3 channel 1 on DMA1 channel 6 */
+#define HAL_DMA1_CH6_TIM3_TRIG (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM3_TRIG) /*!< Remap TIM3 Trig on DMA1 channel 6 */
+#define HAL_DMA1_CH6_TIM16_CH1 (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM16_CH1) /*!< Remap TIM16 channel 1 on DMA1 channel 6 */
+#define HAL_DMA1_CH6_TIM16_UP (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM16_UP) /*!< Remap TIM16 up on DMA1 channel 6 */
+#define HAL_DMA1_CH6_USART1_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_USART2_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_USART3_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_USART4_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_USART5_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_USART6_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_USART7_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_USART8_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 6 */
+/* DMA1 - Channel 7 */
+#define HAL_DMA1_CH7_DEFAULT (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */
+#define HAL_DMA1_CH7_I2C1_RX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_I2C1_RX) /*!< Remap I2C1 Rx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_SPI2_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_SPI2_TX) /*!< Remap SPI2 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_TIM2_CH2 (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_TIM2_CH2) /*!< Remap TIM2 channel 2 on DMA1 channel 7 */
+#define HAL_DMA1_CH7_TIM2_CH4 (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_TIM2_CH4) /*!< Remap TIM2 channel 4 on DMA1 channel 7 */
+#define HAL_DMA1_CH7_TIM17_CH1 (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_TIM17_CH1) /*!< Remap TIM17 channel 1 on DMA1 channel 7 */
+#define HAL_DMA1_CH7_TIM17_UP (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_TIM17_UP) /*!< Remap TIM17 up on DMA1 channel 7 */
+#define HAL_DMA1_CH7_USART1_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART1_TX) /*!< Remap USART1 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_USART2_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART2_TX) /*!< Remap USART2 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_USART3_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART3_TX) /*!< Remap USART3 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_USART4_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART4_TX) /*!< Remap USART4 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_USART5_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART5_TX) /*!< Remap USART5 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_USART6_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART6_TX) /*!< Remap USART6 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_USART7_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART7_TX) /*!< Remap USART7 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_USART8_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART8_TX) /*!< Remap USART8 Tx on DMA1 channel 7 */
+
+/****************** DMA2 remap bit field definition********************/
+/* DMA2 - Channel 1 */
+#define HAL_DMA2_CH1_DEFAULT (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */
+#define HAL_DMA2_CH1_I2C2_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_I2C2_TX) /*!< Remap I2C2 TX on DMA2 channel 1 */
+#define HAL_DMA2_CH1_USART1_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART1_TX) /*!< Remap USART1 Tx on DMA2 channel 1 */
+#define HAL_DMA2_CH1_USART2_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART2_TX) /*!< Remap USART2 Tx on DMA2 channel 1 */
+#define HAL_DMA2_CH1_USART3_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART3_TX) /*!< Remap USART3 Tx on DMA2 channel 1 */
+#define HAL_DMA2_CH1_USART4_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART4_TX) /*!< Remap USART4 Tx on DMA2 channel 1 */
+#define HAL_DMA2_CH1_USART5_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART5_TX) /*!< Remap USART5 Tx on DMA2 channel 1 */
+#define HAL_DMA2_CH1_USART6_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART6_TX) /*!< Remap USART6 Tx on DMA2 channel 1 */
+#define HAL_DMA2_CH1_USART7_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART7_TX) /*!< Remap USART7 Tx on DMA2 channel 1 */
+#define HAL_DMA2_CH1_USART8_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART8_TX) /*!< Remap USART8 Tx on DMA2 channel 1 */
+/* DMA2 - Channel 2 */
+#define HAL_DMA2_CH2_DEFAULT (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */
+#define HAL_DMA2_CH2_I2C2_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_I2C2_RX) /*!< Remap I2C2 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_USART1_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART1_RX) /*!< Remap USART1 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_USART2_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART2_RX) /*!< Remap USART2 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_USART3_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART3_RX) /*!< Remap USART3 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_USART4_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART4_RX) /*!< Remap USART4 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_USART5_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART5_RX) /*!< Remap USART5 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_USART6_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART6_RX) /*!< Remap USART6 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_USART7_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART7_RX) /*!< Remap USART7 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_USART8_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART8_RX) /*!< Remap USART8 Rx on DMA2 channel 2 */
+/* DMA2 - Channel 3 */
+#define HAL_DMA2_CH3_DEFAULT (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */
+#define HAL_DMA2_CH3_TIM6_UP (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_TIM6_UP) /*!< Remap TIM6 up on DMA2 channel 3 */
+#define HAL_DMA2_CH3_DAC_CH1 (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_DAC_CH1) /*!< Remap DAC channel 1 on DMA2 channel 3 */
+#define HAL_DMA2_CH3_SPI1_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_SPI1_RX) /*!< Remap SPI1 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_USART1_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART1_RX) /*!< Remap USART1 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_USART2_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART2_RX) /*!< Remap USART2 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_USART3_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART3_RX) /*!< Remap USART3 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_USART4_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART4_RX) /*!< Remap USART4 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_USART5_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART5_RX) /*!< Remap USART5 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_USART6_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART6_RX) /*!< Remap USART6 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_USART7_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART7_RX) /*!< Remap USART7 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_USART8_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART8_RX) /*!< Remap USART8 Rx on DMA2 channel 3 */
+/* DMA2 - Channel 4 */
+#define HAL_DMA2_CH4_DEFAULT (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */
+#define HAL_DMA2_CH4_TIM7_UP (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_TIM7_UP) /*!< Remap TIM7 up on DMA2 channel 4 */
+#define HAL_DMA2_CH4_DAC_CH2 (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_DAC_CH2) /*!< Remap DAC channel 2 on DMA2 channel 4 */
+#define HAL_DMA2_CH4_SPI1_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_SPI1_TX) /*!< Remap SPI1 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_USART1_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART1_TX) /*!< Remap USART1 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_USART2_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART2_TX) /*!< Remap USART2 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_USART3_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART3_TX) /*!< Remap USART3 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_USART4_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART4_TX) /*!< Remap USART4 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_USART5_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART5_TX) /*!< Remap USART5 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_USART6_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART6_TX) /*!< Remap USART6 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_USART7_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART7_TX) /*!< Remap USART7 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_USART8_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART8_TX) /*!< Remap USART8 Tx on DMA2 channel 4 */
+/* DMA2 - Channel 5 */
+#define HAL_DMA2_CH5_DEFAULT (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */
+#define HAL_DMA2_CH5_ADC (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_ADC) /*!< Remap ADC on DMA2 channel 5 */
+#define HAL_DMA2_CH5_USART1_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART1_TX) /*!< Remap USART1 Tx on DMA2 channel 5 */
+#define HAL_DMA2_CH5_USART2_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART2_TX) /*!< Remap USART2 Tx on DMA2 channel 5 */
+#define HAL_DMA2_CH5_USART3_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART3_TX) /*!< Remap USART3 Tx on DMA2 channel 5 */
+#define HAL_DMA2_CH5_USART4_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART4_TX) /*!< Remap USART4 Tx on DMA2 channel 5 */
+#define HAL_DMA2_CH5_USART5_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART5_TX) /*!< Remap USART5 Tx on DMA2 channel 5 */
+#define HAL_DMA2_CH5_USART6_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART6_TX) /*!< Remap USART6 Tx on DMA2 channel 5 */
+#define HAL_DMA2_CH5_USART7_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART7_TX) /*!< Remap USART7 Tx on DMA2 channel 5 */
+#define HAL_DMA2_CH5_USART8_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART8_TX) /*!< Remap USART8 Tx on DMA2 channel 5 */
+#endif /* !defined(STM32F030xC) */
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+#define IS_HAL_DMA1_REMAP(REQUEST) (((REQUEST) == HAL_DMA1_CH1_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH1_ADC) ||\
+ ((REQUEST) == HAL_DMA1_CH1_TIM17_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH1_TIM17_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART3_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART4_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART5_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART6_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART7_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART8_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH2_ADC) ||\
+ ((REQUEST) == HAL_DMA1_CH2_I2C1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_SPI1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_TIM1_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH2_I2C1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_TIM17_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH2_TIM17_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART2_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART3_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART4_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART5_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART6_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART7_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART8_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH3_TIM6_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH3_DAC_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH3_I2C1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_SPI1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_TIM1_CH2) ||\
+ ((REQUEST) == HAL_DMA1_CH3_TIM2_CH2) ||\
+ ((REQUEST) == HAL_DMA1_CH3_TIM16_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH3_TIM16_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART3_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART4_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART5_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART6_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART7_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART8_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH4_TIM7_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH4_DAC_CH2) ||\
+ ((REQUEST) == HAL_DMA1_CH4_I2C2_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_SPI2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_TIM2_CH4) ||\
+ ((REQUEST) == HAL_DMA1_CH4_TIM3_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH4_TIM3_TRIG) ||\
+ ((REQUEST) == HAL_DMA1_CH4_TIM16_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH4_TIM16_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART2_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART3_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART4_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART5_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART6_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART7_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART8_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH5_I2C2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_SPI2_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_TIM1_CH3) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART3_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART4_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART5_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART6_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART7_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART8_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH6_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH6_I2C1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH6_SPI2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH6_TIM1_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH6_TIM1_CH2) ||\
+ ((REQUEST) == HAL_DMA1_CH6_TIM1_CH3) ||\
+ ((REQUEST) == HAL_DMA1_CH6_TIM3_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH6_TIM3_TRIG) ||\
+ ((REQUEST) == HAL_DMA1_CH6_TIM16_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH6_TIM16_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH6_USART1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH6_USART2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH6_USART3_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH6_USART4_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH6_USART5_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH6_USART6_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH6_USART7_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH6_USART8_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH7_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH7_I2C1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH7_SPI2_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH7_TIM2_CH2) ||\
+ ((REQUEST) == HAL_DMA1_CH7_TIM2_CH4) ||\
+ ((REQUEST) == HAL_DMA1_CH7_TIM17_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH7_TIM17_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH7_USART1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH7_USART2_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH7_USART3_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH7_USART4_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH7_USART5_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH7_USART6_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH7_USART7_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH7_USART8_TX))
+
+#define IS_HAL_DMA2_REMAP(REQUEST) (((REQUEST) == HAL_DMA2_CH1_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA2_CH1_I2C2_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH1_USART1_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH1_USART2_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH1_USART3_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH1_USART4_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH1_USART5_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH1_USART6_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH1_USART7_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH1_USART8_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH2_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA2_CH2_I2C2_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH2_USART1_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH2_USART2_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH2_USART3_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH2_USART4_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH2_USART5_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH2_USART6_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH2_USART7_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH2_USART8_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH3_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA2_CH3_TIM6_UP) ||\
+ ((REQUEST) == HAL_DMA2_CH3_DAC_CH1) ||\
+ ((REQUEST) == HAL_DMA2_CH3_SPI1_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH3_USART1_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH3_USART2_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH3_USART3_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH3_USART4_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH3_USART5_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH3_USART6_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH3_USART7_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH3_USART8_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH4_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA2_CH4_TIM7_UP) ||\
+ ((REQUEST) == HAL_DMA2_CH4_DAC_CH2) ||\
+ ((REQUEST) == HAL_DMA2_CH4_SPI1_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH4_USART1_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH4_USART2_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH4_USART3_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH4_USART4_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH4_USART5_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH4_USART6_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH4_USART7_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH4_USART8_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH5_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA2_CH5_ADC) ||\
+ ((REQUEST) == HAL_DMA2_CH5_USART1_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH5_USART2_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH5_USART3_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH5_USART4_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH5_USART5_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH5_USART6_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH5_USART7_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH5_USART8_TX ))
+#endif /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F030xC)
+#define IS_HAL_DMA1_REMAP(REQUEST) (((REQUEST) == HAL_DMA1_CH1_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH1_ADC) ||\
+ ((REQUEST) == HAL_DMA1_CH1_TIM17_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH1_TIM17_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART3_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART4_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART5_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART6_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH2_ADC) ||\
+ ((REQUEST) == HAL_DMA1_CH2_I2C1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_SPI1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_TIM1_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH2_I2C1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_TIM17_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH2_TIM17_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART2_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART3_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART4_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART5_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART6_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH3_TIM6_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH3_I2C1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_SPI1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_TIM1_CH2) ||\
+ ((REQUEST) == HAL_DMA1_CH3_TIM16_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH3_TIM16_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART3_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART4_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART5_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART6_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH4_TIM7_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH4_I2C2_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_SPI2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_TIM3_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH4_TIM3_TRIG) ||\
+ ((REQUEST) == HAL_DMA1_CH4_TIM16_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH4_TIM16_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART2_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART3_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART4_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART5_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART6_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH5_I2C2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_SPI2_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_TIM1_CH3) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART3_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART4_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART5_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART6_RX))
+#endif /* STM32F030xC */
+
+/**
+ * @}
+ */
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @defgroup DMAEx_Exported_Macros DMAEx Exported Macros
+ * @{
+ */
+/* Interrupt & Flag management */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)
+/**
+ * @brief Returns the current DMA Channel transfer complete flag.
+ * @param __HANDLE__: DMA handle
+ * @retval The specified transfer complete flag index.
+ */
+#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\
+ DMA_FLAG_TC7)
+
+/**
+ * @brief Returns the current DMA Channel half transfer complete flag.
+ * @param __HANDLE__: DMA handle
+ * @retval The specified half transfer complete flag index.
+ */
+#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\
+ DMA_FLAG_HT7)
+
+/**
+ * @brief Returns the current DMA Channel transfer error flag.
+ * @param __HANDLE__: DMA handle
+ * @retval The specified transfer error flag index.
+ */
+#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\
+ DMA_FLAG_TE7)
+
+/**
+ * @brief Get the DMA Channel pending flags.
+ * @param __HANDLE__: DMA handle
+ * @param __FLAG__: Get the specified flag.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_FLAG_TCx: Transfer complete flag
+ * @arg DMA_FLAG_HTx: Half transfer complete flag
+ * @arg DMA_FLAG_TEx: Transfer error flag
+ * Where x can be 1_7 to select the DMA Channel flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+
+#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__) (DMA1->ISR & (__FLAG__))
+
+/**
+ * @brief Clears the DMA Channel pending flags.
+ * @param __HANDLE__: DMA handle
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_FLAG_TCx: Transfer complete flag
+ * @arg DMA_FLAG_HTx: Half transfer complete flag
+ * @arg DMA_FLAG_TEx: Transfer error flag
+ * Where x can be 1_7 to select the DMA Channel flag.
+ * @retval None
+ */
+#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) (DMA1->IFCR = (__FLAG__))
+
+#elif defined(STM32F091xC) || defined(STM32F098xx)
+/**
+ * @brief Returns the current DMA Channel transfer complete flag.
+ * @param __HANDLE__: DMA handle
+ * @retval The specified transfer complete flag index.
+ */
+#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_TC7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TC1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TC2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TC3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TC4 :\
+ DMA_FLAG_TC5)
+
+/**
+ * @brief Returns the current DMA Channel half transfer complete flag.
+ * @param __HANDLE__: DMA handle
+ * @retval The specified half transfer complete flag index.
+ */
+#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_HT7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_HT1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_HT2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_HT3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_HT4 :\
+ DMA_FLAG_HT5)
+
+/**
+ * @brief Returns the current DMA Channel transfer error flag.
+ * @param __HANDLE__: DMA handle
+ * @retval The specified transfer error flag index.
+ */
+#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_TE7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TE1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TE2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TE3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TE4 :\
+ DMA_FLAG_TE5)
+
+/**
+ * @brief Get the DMA Channel pending flags.
+ * @param __HANDLE__: DMA handle
+ * @param __FLAG__: Get the specified flag.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_FLAG_TCx: Transfer complete flag
+ * @arg DMA_FLAG_HTx: Half transfer complete flag
+ * @arg DMA_FLAG_TEx: Transfer error flag
+ * Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Channel flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+
+#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__)\
+(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Channel7)? (DMA2->ISR & (__FLAG__)) :\
+ (DMA1->ISR & (__FLAG__)))
+
+/**
+ * @brief Clears the DMA Channel pending flags.
+ * @param __HANDLE__: DMA handle
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_FLAG_TCx: Transfer complete flag
+ * @arg DMA_FLAG_HTx: Half transfer complete flag
+ * @arg DMA_FLAG_TEx: Transfer error flag
+ * Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Channel flag.
+ * @retval None
+ */
+#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) \
+(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Channel7)? (DMA2->IFCR = (__FLAG__)) :\
+ (DMA1->IFCR = (__FLAG__)))
+
+#else /* STM32F030x8_STM32F030xC_STM32F031x6_STM32F038xx_STM32F051x8_STM32F058xx_STM32F070x6_STM32F070xB Product devices */
+/**
+ * @brief Returns the current DMA Channel transfer complete flag.
+ * @param __HANDLE__: DMA handle
+ * @retval The specified transfer complete flag index.
+ */
+#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\
+ DMA_FLAG_TC5)
+
+/**
+ * @brief Returns the current DMA Channel half transfer complete flag.
+ * @param __HANDLE__: DMA handle
+ * @retval The specified half transfer complete flag index.
+ */
+#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\
+ DMA_FLAG_HT5)
+
+/**
+ * @brief Returns the current DMA Channel transfer error flag.
+ * @param __HANDLE__: DMA handle
+ * @retval The specified transfer error flag index.
+ */
+#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\
+ DMA_FLAG_TE5)
+
+/**
+ * @brief Get the DMA Channel pending flags.
+ * @param __HANDLE__: DMA handle
+ * @param __FLAG__: Get the specified flag.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_FLAG_TCx: Transfer complete flag
+ * @arg DMA_FLAG_HTx: Half transfer complete flag
+ * @arg DMA_FLAG_TEx: Transfer error flag
+ * Where x can be 1_5 to select the DMA Channel flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+
+#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__) (DMA1->ISR & (__FLAG__))
+
+/**
+ * @brief Clears the DMA Channel pending flags.
+ * @param __HANDLE__: DMA handle
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_FLAG_TCx: Transfer complete flag
+ * @arg DMA_FLAG_HTx: Half transfer complete flag
+ * @arg DMA_FLAG_TEx: Transfer error flag
+ * Where x can be 1_5 to select the DMA Channel flag.
+ * @retval None
+ */
+#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) (DMA1->IFCR = (__FLAG__))
+
+#endif
+
+
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+#define __HAL_DMA1_REMAP(__REQUEST__) \
+ do { assert_param(IS_HAL_DMA1_REMAP(__REQUEST__)); \
+ DMA1->CSELR &= ~((uint32_t)0x0F << (uint32_t)(((__REQUEST__) >> 28) * 4)); \
+ DMA1->CSELR |= (uint32_t)((__REQUEST__) & 0x0FFFFFFF); \
+ }while(0)
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+#define __HAL_DMA2_REMAP(__REQUEST__) \
+ do { assert_param(IS_HAL_DMA2_REMAP(__REQUEST__)); \
+ DMA2->CSELR &= ~((uint32_t)0x0F << (uint32_t)(((__REQUEST__) >> 28) * 4)); \
+ DMA2->CSELR |= (uint32_t)((__REQUEST__) & 0x0FFFFFFF); \
+ }while(0)
+#endif /* STM32F091xC || STM32F098xx */
+
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_DMA_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/include/stm32f0xx_hal_flash.h b/f0/include/stm32f0xx_hal_flash.h
new file mode 100755
index 0000000000000000000000000000000000000000..669696bd7d441425bc1f0683b2394fa9a0d8c51f
--- /dev/null
+++ b/f0/include/stm32f0xx_hal_flash.h
@@ -0,0 +1,515 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_flash.h
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief Header file of Flash HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_FLASH_H
+#define __STM32F0xx_HAL_FLASH_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FLASH
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup FLASH_Exported_Types FLASH Exported Types
+ * @{
+ */
+
+/**
+ * @brief FLASH Erase structure definition
+ */
+typedef struct
+{
+ uint32_t TypeErase; /*!< TypeErase: Mass erase or page erase.
+ This parameter can be a value of @ref FLASH_Type_Erase */
+
+ uint32_t PageAddress; /*!< PageAdress: Initial FLASH page address to erase when mass erase is disabled
+ This parameter must be a value of @ref FLASHEx_Address */
+
+ uint32_t NbPages; /*!< NbPages: Number of pagess to be erased.
+ This parameter must be a value between 1 and (max number of pages - value of initial page)*/
+
+} FLASH_EraseInitTypeDef;
+
+/**
+ * @brief FLASH Options bytes program structure definition
+ */
+typedef struct
+{
+ uint32_t OptionType; /*!< OptionType: Option byte to be configured.
+ This parameter can be a value of @ref FLASH_OB_Type */
+
+ uint32_t WRPState; /*!< WRPState: Write protection activation or deactivation.
+ This parameter can be a value of @ref FLASH_OB_WRP_State */
+
+ uint32_t WRPPage; /*!< WRPSector: specifies the page(s) to be write protected
+ This parameter can be a value of @ref FLASHEx_OB_Write_Protection */
+
+ uint8_t RDPLevel; /*!< RDPLevel: Set the read protection level..
+ This parameter can be a value of @ref FLASH_OB_Read_Protection */
+
+ uint8_t USERConfig; /*!< USERConfig: Program the FLASH User Option Byte:
+ IWDG / STOP / STDBY / BOOT1 / VDDA_ANALOG / SRAM_PARITY
+ This parameter can be a combination of @ref FLASH_OB_Watchdog, @ref FLASH_OB_nRST_STOP,
+ @ref FLASH_OB_nRST_STDBY, @ref FLASH_OB_BOOT1, @ref FLASH_OB_VDDA_Analog_Monitoring and
+ @ref FLASH_OB_RAM_Parity_Check_Enable */
+
+ uint32_t DATAAddress; /*!< DATAAddress: Address of the option byte DATA to be prgrammed
+ This parameter can be a value of @ref FLASH_OB_Data_Address */
+
+ uint8_t DATAData; /*!< DATAData: Data to be stored in the option byte DATA
+ This parameter can have any value */
+
+} FLASH_OBProgramInitTypeDef;
+
+/**
+ * @brief FLASH Procedure structure definition
+ */
+typedef enum
+{
+ FLASH_PROC_NONE = 0,
+ FLASH_PROC_PAGEERASE = 1,
+ FLASH_PROC_MASSERASE = 2,
+ FLASH_PROC_PROGRAMHALFWORD = 3,
+ FLASH_PROC_PROGRAMWORD = 4,
+ FLASH_PROC_PROGRAMDOUBLEWORD = 5
+} FLASH_ProcedureTypeDef;
+
+/**
+ * @brief FLASH handle Structure definition
+ */
+typedef struct
+{
+ __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /*!< Internal variable to indicate which procedure is ongoing or not in IT context */
+
+ __IO uint32_t DataRemaining; /*!< Internal variable to save the remaining pages to erase or half-word to program in IT context */
+
+ __IO uint32_t Address; /*!< Internal variable to save address selected for program or erase */
+
+ __IO uint64_t Data; /*!< Internal variable to save data to be programmed */
+
+ HAL_LockTypeDef Lock; /*!< FLASH locking object */
+
+ __IO uint32_t ErrorCode; /*!< FLASH error code
+ This parameter can be a value of @ref FLASH_Error */
+
+} FLASH_ProcessTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup FLASH_Exported_Constants FLASH Exported Constants
+ * @{
+ */
+
+/** @defgroup FLASH_Error FLASH Error
+ * @{
+ */
+#define FLASH_ERROR_NONE ((uint32_t)0x00000000)
+#define FLASH_ERROR_PG ((uint32_t)0x00000001)
+#define FLASH_ERROR_WRP ((uint32_t)0x00000002)
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Type_Erase FLASH Type Erase
+ * @{
+ */
+#define TYPEERASE_PAGES ((uint32_t)0x00) /*!<Pages erase only*/
+#define TYPEERASE_MASSERASE ((uint32_t)0x01) /*!<Flash mass erase activation*/
+
+#define IS_TYPEERASE(VALUE) (((VALUE) == TYPEERASE_PAGES) || \
+ ((VALUE) == TYPEERASE_MASSERASE))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Type_Program FLASH Type Program
+ * @{
+ */
+#define TYPEPROGRAM_HALFWORD ((uint32_t)0x01) /*!<Program a half-word (16-bit) at a specified address.*/
+#define TYPEPROGRAM_WORD ((uint32_t)0x02) /*!<Program a word (32-bit) at a specified address.*/
+#define TYPEPROGRAM_DOUBLEWORD ((uint32_t)0x03) /*!<Program a double word (64-bit) at a specified address*/
+
+#define IS_TYPEPROGRAM(VALUE) (((VALUE) == TYPEPROGRAM_HALFWORD) || \
+ ((VALUE) == TYPEPROGRAM_WORD) || \
+ ((VALUE) == TYPEPROGRAM_DOUBLEWORD))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_WRP_State FLASH WRP State
+ * @{
+ */
+#define WRPSTATE_DISABLE ((uint32_t)0x00) /*!<Disable the write protection of the desired pages*/
+#define WRPSTATE_ENABLE ((uint32_t)0x01) /*!<Enable the write protection of the desired pagess*/
+
+#define IS_WRPSTATE(VALUE) (((VALUE) == WRPSTATE_DISABLE) || \
+ ((VALUE) == WRPSTATE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_Type FLASH Option Bytes Type
+ * @{
+ */
+#define OPTIONBYTE_WRP ((uint32_t)0x01) /*!<WRP option byte configuration*/
+#define OPTIONBYTE_RDP ((uint32_t)0x02) /*!<RDP option byte configuration*/
+#define OPTIONBYTE_USER ((uint32_t)0x04) /*!<USER option byte configuration*/
+#define OPTIONBYTE_DATA ((uint32_t)0x08) /*!<DATA option byte configuration*/
+
+#define IS_OPTIONBYTE(VALUE) ((VALUE) <= (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER | OPTIONBYTE_DATA))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Latency FLASH Latency
+ * @{
+ */
+#define FLASH_LATENCY_0 ((uint32_t)0x00000000) /*!< FLASH Zero Latency cycle */
+#define FLASH_LATENCY_1 FLASH_ACR_LATENCY /*!< FLASH One Latency cycle */
+
+#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_LATENCY_0) || \
+ ((LATENCY) == FLASH_LATENCY_1))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_Data_Address FLASH OB Data Address
+ * @{
+ */
+#define IS_OB_DATA_ADDRESS(ADDRESS) (((ADDRESS) == 0x1FFFF804) || ((ADDRESS) == 0x1FFFF806))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_Read_Protection FLASH OB Read Protection
+ * @{
+ */
+#define OB_RDP_LEVEL_0 ((uint8_t)0xAA)
+#define OB_RDP_LEVEL_1 ((uint8_t)0xBB)
+#define OB_RDP_LEVEL_2 ((uint8_t)0xCC) /*!< Warning: When enabling read protection level 2
+ it's no more possible to go back to level 1 or 0 */
+#define IS_OB_RDP_LEVEL(LEVEL) (((LEVEL) == OB_RDP_LEVEL_0) ||\
+ ((LEVEL) == OB_RDP_LEVEL_1))/*||\
+ ((LEVEL) == OB_RDP_LEVEL_2))*/
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_Watchdog FLASH OB Watchdog
+ * @{
+ */
+#define OB_WDG_SW ((uint8_t)0x01) /*!< Software WDG selected */
+#define OB_WDG_HW ((uint8_t)0x00) /*!< Hardware WDG selected */
+#define IS_OB_WDG_SOURCE(SOURCE) (((SOURCE) == OB_WDG_SW) || ((SOURCE) == OB_WDG_HW))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_nRST_STOP FLASH OB nRST STOP
+ * @{
+ */
+#define OB_STOP_NO_RST ((uint8_t)0x02) /*!< No reset generated when entering in STOP */
+#define OB_STOP_RST ((uint8_t)0x00) /*!< Reset generated when entering in STOP */
+#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NO_RST) || ((SOURCE) == OB_STOP_RST))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_nRST_STDBY FLASH OB nRST STDBY
+ * @{
+ */
+#define OB_STDBY_NO_RST ((uint8_t)0x04) /*!< No reset generated when entering in STANDBY */
+#define OB_STDBY_RST ((uint8_t)0x00) /*!< Reset generated when entering in STANDBY */
+#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NO_RST) || ((SOURCE) == OB_STDBY_RST))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_BOOT1 FLASH OB BOOT1
+ * @{
+ */
+#define OB_BOOT1_RESET ((uint8_t)0x00) /*!< BOOT1 Reset */
+#define OB_BOOT1_SET ((uint8_t)0x10) /*!< BOOT1 Set */
+#define IS_OB_BOOT1(BOOT1) (((BOOT1) == OB_BOOT1_RESET) || ((BOOT1) == OB_BOOT1_SET))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_VDDA_Analog_Monitoring FLASH OB VDDA Analog Monitoring
+ * @{
+ */
+#define OB_VDDA_ANALOG_ON ((uint8_t)0x20) /*!< Analog monitoring on VDDA Power source ON */
+#define OB_VDDA_ANALOG_OFF ((uint8_t)0x00) /*!< Analog monitoring on VDDA Power source OFF */
+#define IS_OB_VDDA_ANALOG(ANALOG) (((ANALOG) == OB_VDDA_ANALOG_ON) || ((ANALOG) == OB_VDDA_ANALOG_OFF))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_RAM_Parity_Check_Enable FLASH OB RAM Parity Check Enable
+ * @{
+ */
+#define OB_RAM_PARITY_CHECK_SET ((uint8_t)0x00) /*!< RAM parity check enable set */
+#define OB_RAM_PARITY_CHECK_RESET ((uint8_t)0x40) /*!< RAM parity check enable reset */
+#define IS_OB_SRAM_PARITY(PARITY) (((PARITY) == OB_RAM_PARITY_CHECK_SET) || ((PARITY) == OB_RAM_PARITY_CHECK_RESET))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Flag_definition FLASH Flag definition
+ * @{
+ */
+#define FLASH_FLAG_BSY FLASH_SR_BSY /*!< FLASH Busy flag */
+#define FLASH_FLAG_PGERR FLASH_SR_PGERR /*!< FLASH Programming error flag */
+#define FLASH_FLAG_WRPERR FLASH_SR_WRPERR /*!< FLASH Write protected error flag */
+#define FLASH_FLAG_EOP FLASH_SR_EOP /*!< FLASH End of Operation flag */
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Interrupt_definition FLASH Interrupt definition
+ * @{
+ */
+#define FLASH_IT_EOP FLASH_CR_EOPIE /*!< End of FLASH Operation Interrupt source */
+#define FLASH_IT_ERR FLASH_CR_ERRIE /*!< Error Interrupt source */
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Timeout_definition FLASH Timeout definition
+ * @brief FLASH Timeout definition
+ * @{
+ */
+#define HAL_FLASH_TIMEOUT_VALUE ((uint32_t)50000)/* 50 s */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup FLASH_Exported_Macros FLASH Exported Macros
+ * @brief macros to control FLASH features
+ * @{
+ */
+
+/** @defgroup FLASH_Latency FLASH Latency
+ * @brief macros to handle FLASH Latency
+ * @{
+ */
+
+/**
+ * @brief Set the FLASH Latency.
+ * @param __LATENCY__: FLASH Latency
+ * The value of this parameter depend on device used within the same series
+ * @retval None
+ */
+#define __HAL_FLASH_SET_LATENCY(__LATENCY__) (FLASH->ACR = (FLASH->ACR&(~FLASH_ACR_LATENCY)) | (__LATENCY__))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Prefetch FLASH Prefetch
+ * @brief macros to handle FLASH Prefetch buffer
+ * @{
+ */
+/**
+ * @brief Enable the FLASH prefetch buffer.
+ * @retval None
+ */
+#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() (FLASH->ACR |= FLASH_ACR_PRFTBE)
+
+/**
+ * @brief Disable the FLASH prefetch buffer.
+ * @retval None
+ */
+#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() (FLASH->ACR &= (~FLASH_ACR_PRFTBE))
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Interrupt FLASH Interrupt
+ * @brief macros to handle FLASH interrupts
+ * @{
+ */
+
+/**
+ * @brief Enable the specified FLASH interrupt.
+ * @param __INTERRUPT__ : FLASH interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
+ * @arg FLASH_IT_ERR: Error Interrupt
+ * @retval none
+ */
+#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) (FLASH->CR |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the specified FLASH interrupt.
+ * @param __INTERRUPT__ : FLASH interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
+ * @arg FLASH_IT_ERR: Error Interrupt
+ * @retval none
+ */
+#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) (FLASH->CR &= ~(uint32_t)(__INTERRUPT__))
+
+/**
+ * @brief Get the specified FLASH flag status.
+ * @param __FLAG__: specifies the FLASH flag to check.
+ * This parameter can be one of the following values:
+ * @arg FLASH_FLAG_EOP : FLASH End of Operation flag
+ * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
+ * @arg FLASH_FLAG_PGERR : FLASH Programming error flag
+ * @arg FLASH_FLAG_BSY : FLASH Busy flag
+ * @retval The new state of __FLAG__ (SET or RESET).
+ */
+#define __HAL_FLASH_GET_FLAG(__FLAG__) ((FLASH->SR & (__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clear the specified FLASH flag.
+ * @param __FLAG__: specifies the FLASH flags to clear.
+ * This parameter can be any combination of the following values:
+ * @arg FLASH_FLAG_EOP : FLASH End of Operation flag
+ * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
+ * @arg FLASH_FLAG_PGERR : FLASH Programming error flag
+ * @retval none
+ */
+#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) (FLASH->SR = (__FLAG__))
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Include FLASH HAL Extension module */
+#include "stm32f0xx_hal_flash_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup FLASH_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup FLASH_Exported_Functions_Group1
+ * @brief Data transfers functions
+ * @{
+ */
+
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+
+/* FLASH IRQ handler method */
+void HAL_FLASH_IRQHandler(void);
+/* Callbacks in non blocking modes */
+void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue);
+void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue);
+
+/**
+ * @}
+ */
+
+/** @addtogroup FLASH_Exported_Functions_Group2
+ * @brief management functions
+ * @{
+ */
+
+/* FLASH Memory Programming functions *****************************************/
+HAL_StatusTypeDef HAL_FLASH_Unlock(void);
+HAL_StatusTypeDef HAL_FLASH_Lock(void);
+
+/* Option Bytes Programming functions *****************************************/
+HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Lock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Launch(void);
+
+/**
+ * @}
+ */
+
+/** @addtogroup FLASH_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral State and Error functions ***************************************/
+uint32_t HAL_FLASH_GetError(void);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_FLASH_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/include/stm32f0xx_hal_flash_ex.h b/f0/include/stm32f0xx_hal_flash_ex.h
new file mode 100755
index 0000000000000000000000000000000000000000..cac17262fa08ce6cc32c637d6d852619d1591910
--- /dev/null
+++ b/f0/include/stm32f0xx_hal_flash_ex.h
@@ -0,0 +1,296 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_flash_ex.h
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief Header file of FLASH HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_FLASH_EX_H
+#define __STM32F0xx_HAL_FLASH_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FLASHEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup FLASHEx_Exported_Constants FLASHEx Exported Constants
+ * @{
+ */
+/** @defgroup FLASHEx_Address FLASHEx Address
+ * @{
+ */
+#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F038xx) || defined(STM32F070x6)
+#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= 0x08000000) && ((ADDRESS) <= 0x08007FFF))
+#endif /* STM32F030x6 || STM32F031x6 || STM32F042x6 || STM32F048xx || STM32F038xx || STM32F070x6 */
+
+#if defined(STM32F030x8) || defined(STM32F051x8) || defined(STM32F058xx)
+#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= 0x08000000) && ((ADDRESS) <= 0x0800FFFF))
+#endif /* STM32F030x8 || STM32F051x8 || STM32F058xx */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)
+#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= 0x08000000) && ((ADDRESS) <= 0x0801FFFF))
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB*/
+
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= 0x08000000) && ((ADDRESS) <= 0x0803FFFF))
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC*/
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Page_Size FLASHEx Page Size
+ * @{
+ */
+#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx) || \
+ defined(STM32F051x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F058xx) || defined(STM32F070x6)
+#define FLASH_PAGE_SIZE 0x400
+#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F051x8 || STM32F042x6 || STM32F048xx || STM32F058xx || STM32F070x6 */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+#define FLASH_PAGE_SIZE 0x800
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx || STM32F030xC */
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Nb_Pages FLASHEx Nb Pages
+ * @{
+ */
+#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F038xx)|| defined(STM32F070x6)
+#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x08007FFF)
+#endif /* STM32F030x6 || STM32F031x6 || STM32F042x6 || STM32F048xx || STM32F038xx || STM32F070x6 */
+
+#if defined(STM32F030x8) || defined(STM32F051x8) || defined(STM32F058xx)
+#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0800FFFF)
+#endif /* STM32F030x8 || STM32F051x8 || STM32F058xx */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)
+#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0801FFFF)
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB */
+
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0803FFFF)
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_OB_Write_Protection FLASHEx OB Write Protection
+ * @{
+ */
+#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx) || \
+ defined(STM32F051x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F058xx) || defined(STM32F070x6)
+#define OB_WRP_PAGES0TO3 ((uint32_t)0x00000001) /* Write protection of page 0 to 3 */
+#define OB_WRP_PAGES4TO7 ((uint32_t)0x00000002) /* Write protection of page 4 to 7 */
+#define OB_WRP_PAGES8TO11 ((uint32_t)0x00000004) /* Write protection of page 8 to 11 */
+#define OB_WRP_PAGES12TO15 ((uint32_t)0x00000008) /* Write protection of page 12 to 15 */
+#define OB_WRP_PAGES16TO19 ((uint32_t)0x00000010) /* Write protection of page 16 to 19 */
+#define OB_WRP_PAGES20TO23 ((uint32_t)0x00000020) /* Write protection of page 20 to 23 */
+#define OB_WRP_PAGES24TO27 ((uint32_t)0x00000040) /* Write protection of page 24 to 27 */
+#define OB_WRP_PAGES28TO31 ((uint32_t)0x00000080) /* Write protection of page 28 to 31 */
+#if defined(STM32F030x8) || defined(STM32F051x8) || defined(STM32F058xx)
+#define OB_WRP_PAGES32TO35 ((uint32_t)0x00000100) /* Write protection of page 32 to 35 */
+#define OB_WRP_PAGES36TO39 ((uint32_t)0x00000200) /* Write protection of page 36 to 39 */
+#define OB_WRP_PAGES40TO43 ((uint32_t)0x00000400) /* Write protection of page 40 to 43 */
+#define OB_WRP_PAGES44TO47 ((uint32_t)0x00000800) /* Write protection of page 44 to 47 */
+#define OB_WRP_PAGES48TO51 ((uint32_t)0x00001000) /* Write protection of page 48 to 51 */
+#define OB_WRP_PAGES52TO57 ((uint32_t)0x00002000) /* Write protection of page 52 to 57 */
+#define OB_WRP_PAGES56TO59 ((uint32_t)0x00004000) /* Write protection of page 56 to 59 */
+#define OB_WRP_PAGES60TO63 ((uint32_t)0x00008000) /* Write protection of page 60 to 63 */
+#endif /* STM32F030x8 || STM32F051x8 || STM32F058xx */
+
+#define OB_WRP_PAGES0TO31MASK ((uint32_t)0x000000FF)
+#if defined(STM32F030x8) || defined(STM32F051x8) || defined(STM32F058xx)
+#define OB_WRP_PAGES32TO63MASK ((uint32_t)0x0000FF00)
+#endif /* STM32F030x8 || STM32F051x8 || STM32F058xx */
+
+#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F038xx)|| defined(STM32F070x6)
+#define OB_WRP_ALLPAGES ((uint32_t)0x000000FF) /*!< Write protection of all pages */
+#endif /* STM32F030x6 || STM32F031x6 || STM32F042x6 || STM32F048xx || STM32F038xx || STM32F070x6 */
+
+#if defined(STM32F030x8) || defined(STM32F051x8) || defined(STM32F058xx)
+#define OB_WRP_ALLPAGES ((uint32_t)0x0000FFFF) /*!< Write protection of all pages */
+#endif /* STM32F030x8 || STM32F051x8 || STM32F058xx */
+#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F051x8 || STM32F042x6 || STM32F048xx || STM32F038xx || STM32F058xx || STM32F070x6 */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+#define OB_WRP_PAGES0TO1 ((uint32_t)0x00000001) /* Write protection of page 0 to 1 */
+#define OB_WRP_PAGES2TO3 ((uint32_t)0x00000002) /* Write protection of page 2 to 3 */
+#define OB_WRP_PAGES4TO5 ((uint32_t)0x00000004) /* Write protection of page 4 to 5 */
+#define OB_WRP_PAGES6TO7 ((uint32_t)0x00000008) /* Write protection of page 6 to 7 */
+#define OB_WRP_PAGES8TO9 ((uint32_t)0x00000010) /* Write protection of page 8 to 9 */
+#define OB_WRP_PAGES10TO11 ((uint32_t)0x00000020) /* Write protection of page 10 to 11 */
+#define OB_WRP_PAGES12TO13 ((uint32_t)0x00000040) /* Write protection of page 12 to 13 */
+#define OB_WRP_PAGES14TO15 ((uint32_t)0x00000080) /* Write protection of page 14 to 15 */
+#define OB_WRP_PAGES16TO17 ((uint32_t)0x00000100) /* Write protection of page 16 to 17 */
+#define OB_WRP_PAGES18TO19 ((uint32_t)0x00000200) /* Write protection of page 18 to 19 */
+#define OB_WRP_PAGES20TO21 ((uint32_t)0x00000400) /* Write protection of page 20 to 21 */
+#define OB_WRP_PAGES22TO23 ((uint32_t)0x00000800) /* Write protection of page 22 to 23 */
+#define OB_WRP_PAGES24TO25 ((uint32_t)0x00001000) /* Write protection of page 24 to 25 */
+#define OB_WRP_PAGES26TO27 ((uint32_t)0x00002000) /* Write protection of page 26 to 27 */
+#define OB_WRP_PAGES28TO29 ((uint32_t)0x00004000) /* Write protection of page 28 to 29 */
+#define OB_WRP_PAGES30TO31 ((uint32_t)0x00008000) /* Write protection of page 30 to 31 */
+#define OB_WRP_PAGES32TO33 ((uint32_t)0x00010000) /* Write protection of page 32 to 33 */
+#define OB_WRP_PAGES34TO35 ((uint32_t)0x00020000) /* Write protection of page 34 to 35 */
+#define OB_WRP_PAGES36TO37 ((uint32_t)0x00040000) /* Write protection of page 36 to 37 */
+#define OB_WRP_PAGES38TO39 ((uint32_t)0x00080000) /* Write protection of page 38 to 39 */
+#define OB_WRP_PAGES40TO41 ((uint32_t)0x00100000) /* Write protection of page 40 to 41 */
+#define OB_WRP_PAGES42TO43 ((uint32_t)0x00200000) /* Write protection of page 42 to 43 */
+#define OB_WRP_PAGES44TO45 ((uint32_t)0x00400000) /* Write protection of page 44 to 45 */
+#define OB_WRP_PAGES46TO47 ((uint32_t)0x00800000) /* Write protection of page 46 to 47 */
+#define OB_WRP_PAGES48TO49 ((uint32_t)0x01000000) /* Write protection of page 48 to 49 */
+#define OB_WRP_PAGES50TO51 ((uint32_t)0x02000000) /* Write protection of page 50 to 51 */
+#define OB_WRP_PAGES52TO53 ((uint32_t)0x04000000) /* Write protection of page 52 to 53 */
+#define OB_WRP_PAGES54TO55 ((uint32_t)0x08000000) /* Write protection of page 54 to 55 */
+#define OB_WRP_PAGES56TO57 ((uint32_t)0x10000000) /* Write protection of page 56 to 57 */
+#define OB_WRP_PAGES58TO59 ((uint32_t)0x20000000) /* Write protection of page 58 to 59 */
+#define OB_WRP_PAGES60TO61 ((uint32_t)0x40000000) /* Write protection of page 60 to 61 */
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)
+#define OB_WRP_PAGES62TO63 ((uint32_t)0x80000000) /* Write protection of page 62 to 63 */
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB */
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+#define OB_WRP_PAGES62TO127 ((uint32_t)0x80000000) /* Write protection of page 62 to 127 */
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#define OB_WRP_PAGES0TO15MASK ((uint32_t)0x000000FF)
+#define OB_WRP_PAGES16TO31MASK ((uint32_t)0x0000FF00)
+#define OB_WRP_PAGES32TO47MASK ((uint32_t)0x00FF0000)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)
+#define OB_WRP_PAGES48TO63MASK ((uint32_t)0xFF000000)
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB */
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+#define OB_WRP_PAGES48TO127MASK ((uint32_t)0xFF000000)
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#define OB_WRP_ALLPAGES ((uint32_t)0xFFFFFFFF) /*!< Write protection of all pages */
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx || STM32F030xC || STM32F070xB */
+
+#define IS_OB_WRP(PAGE) (((PAGE) != 0x0000000))
+/**
+ * @}
+ */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)|| defined(STM32F070x6)
+/** @defgroup FLASHEx_OB_BOOT_SEL FLASHEx OB BOOT SEL
+ * @{
+ */
+#define OB_BOOT_SEL_RESET ((uint8_t)0x00) /*!< BOOT_SEL Reset */
+#define OB_BOOT_SEL_SET ((uint8_t)0x80) /*!< BOOT_SEL Set */
+#define IS_OB_BOOT_SEL(BOOT_SEL) (((BOOT_SEL) == OB_BOOT_SEL_RESET) || ((BOOT_SEL) == OB_BOOT_SEL_SET))
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_OB_BOOT0 FLASHEx OB BOOT0
+ * @{
+ */
+#define OB_BOOT0_RESET ((uint8_t)0x00) /*!< BOOT0 Reset */
+#define OB_BOOT0_SET ((uint8_t)0x08) /*!< BOOT0 Set */
+#define IS_OB_BOOT0(BOOT0) (((BOOT0) == OB_BOOT0_RESET) || ((BOOT0) == OB_BOOT0_SET))
+/**
+ * @}
+ */
+#endif /* STM32F042x6 || STM32F048xx || STM32F091xC || STM32F098xx || STM32F030xC || STM32F070x6 */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup FLASHEx_Exported_Functions FLASHEx Exported Functions
+ * @{
+ */
+
+/** @addtogroup FLASHEx_Exported_Functions_Group2 Extended I/O operation functions
+ * @brief Extended I/O operation functions
+ * @{
+ */
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *PageError);
+HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit);
+
+/**
+ * @}
+ */
+
+/** @addtogroup FLASHEx_Exported_Functions_Group3 Extended Peripheral Control functions
+ * @brief Extended Peripheral Control functions
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_FLASHEx_OBErase(void);
+HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit);
+void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_FLASH_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/include/stm32f0xx_hal_gpio.h b/f0/include/stm32f0xx_hal_gpio.h
new file mode 100755
index 0000000000000000000000000000000000000000..b0dec85947a48a7b5fa882ebd0149b7fd10063a4
--- /dev/null
+++ b/f0/include/stm32f0xx_hal_gpio.h
@@ -0,0 +1,318 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_gpio.h
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief Header file of GPIO HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_GPIO_H
+#define __STM32F0xx_HAL_GPIO_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup GPIO
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup GPIO_Exported_Types GPIO Exported Types
+ * @{
+ */
+/**
+ * @brief GPIO Init structure definition
+ */
+typedef struct
+{
+ uint32_t Pin; /*!< Specifies the GPIO pins to be configured.
+ This parameter can be any value of @ref GPIO_pins */
+
+ uint32_t Mode; /*!< Specifies the operating mode for the selected pins.
+ This parameter can be a value of @ref GPIO_mode */
+
+ uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins.
+ This parameter can be a value of @ref GPIO_pull */
+
+ uint32_t Speed; /*!< Specifies the speed for the selected pins.
+ This parameter can be a value of @ref GPIO_speed */
+
+ uint32_t Alternate; /*!< Peripheral to be connected to the selected pins
+ This parameter can be a value of @ref GPIOEx_Alternate_function_selection */
+}GPIO_InitTypeDef;
+
+/**
+ * @brief GPIO Bit SET and Bit RESET enumeration
+ */
+typedef enum
+{
+ GPIO_PIN_RESET = 0,
+ GPIO_PIN_SET
+}GPIO_PinState;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup GPIO_Exported_Constants GPIO Exported Constants
+ * @{
+ */
+
+/** @defgroup GPIO_pin_actions GPIO pin actions
+ * @{
+ */
+#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET))
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_pins GPIO pins
+ * @{
+ */
+#define GPIO_PIN_0 ((uint16_t)0x0001) /* Pin 0 selected */
+#define GPIO_PIN_1 ((uint16_t)0x0002) /* Pin 1 selected */
+#define GPIO_PIN_2 ((uint16_t)0x0004) /* Pin 2 selected */
+#define GPIO_PIN_3 ((uint16_t)0x0008) /* Pin 3 selected */
+#define GPIO_PIN_4 ((uint16_t)0x0010) /* Pin 4 selected */
+#define GPIO_PIN_5 ((uint16_t)0x0020) /* Pin 5 selected */
+#define GPIO_PIN_6 ((uint16_t)0x0040) /* Pin 6 selected */
+#define GPIO_PIN_7 ((uint16_t)0x0080) /* Pin 7 selected */
+#define GPIO_PIN_8 ((uint16_t)0x0100) /* Pin 8 selected */
+#define GPIO_PIN_9 ((uint16_t)0x0200) /* Pin 9 selected */
+#define GPIO_PIN_10 ((uint16_t)0x0400) /* Pin 10 selected */
+#define GPIO_PIN_11 ((uint16_t)0x0800) /* Pin 11 selected */
+#define GPIO_PIN_12 ((uint16_t)0x1000) /* Pin 12 selected */
+#define GPIO_PIN_13 ((uint16_t)0x2000) /* Pin 13 selected */
+#define GPIO_PIN_14 ((uint16_t)0x4000) /* Pin 14 selected */
+#define GPIO_PIN_15 ((uint16_t)0x8000) /* Pin 15 selected */
+#define GPIO_PIN_All ((uint16_t)0xFFFF) /* All pins selected */
+
+#define GPIO_PIN_MASK ((uint32_t)0x0000FFFF) /* PIN mask for assert test */
+
+#define IS_GPIO_PIN(PIN) (((PIN) & GPIO_PIN_MASK) != (uint32_t)0x00)
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_mode GPIO mode
+ * @brief GPIO Configuration Mode
+ * Elements values convention: 0xX0yz00YZ
+ * - X : GPIO mode or EXTI Mode
+ * - y : External IT or Event trigger detection
+ * - z : IO configuration on External IT or Event
+ * - Y : Output type (Push Pull or Open Drain)
+ * - Z : IO Direction mode (Input, Output, Alternate or Analog)
+ * @{
+ */
+#define GPIO_MODE_INPUT ((uint32_t)0x00000000) /*!< Input Floating Mode */
+#define GPIO_MODE_OUTPUT_PP ((uint32_t)0x00000001) /*!< Output Push Pull Mode */
+#define GPIO_MODE_OUTPUT_OD ((uint32_t)0x00000011) /*!< Output Open Drain Mode */
+#define GPIO_MODE_AF_PP ((uint32_t)0x00000002) /*!< Alternate Function Push Pull Mode */
+#define GPIO_MODE_AF_OD ((uint32_t)0x00000012) /*!< Alternate Function Open Drain Mode */
+
+#define GPIO_MODE_ANALOG ((uint32_t)0x00000003) /*!< Analog Mode */
+
+#define GPIO_MODE_IT_RISING ((uint32_t)0x10110000) /*!< External Interrupt Mode with Rising edge trigger detection */
+#define GPIO_MODE_IT_FALLING ((uint32_t)0x10210000) /*!< External Interrupt Mode with Falling edge trigger detection */
+#define GPIO_MODE_IT_RISING_FALLING ((uint32_t)0x10310000) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+
+#define GPIO_MODE_EVT_RISING ((uint32_t)0x10120000) /*!< External Event Mode with Rising edge trigger detection */
+#define GPIO_MODE_EVT_FALLING ((uint32_t)0x10220000) /*!< External Event Mode with Falling edge trigger detection */
+#define GPIO_MODE_EVT_RISING_FALLING ((uint32_t)0x10320000) /*!< External Event Mode with Rising/Falling edge trigger detection */
+
+#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_MODE_INPUT) ||\
+ ((MODE) == GPIO_MODE_OUTPUT_PP) ||\
+ ((MODE) == GPIO_MODE_OUTPUT_OD) ||\
+ ((MODE) == GPIO_MODE_AF_PP) ||\
+ ((MODE) == GPIO_MODE_AF_OD) ||\
+ ((MODE) == GPIO_MODE_IT_RISING) ||\
+ ((MODE) == GPIO_MODE_IT_FALLING) ||\
+ ((MODE) == GPIO_MODE_IT_RISING_FALLING) ||\
+ ((MODE) == GPIO_MODE_EVT_RISING) ||\
+ ((MODE) == GPIO_MODE_EVT_FALLING) ||\
+ ((MODE) == GPIO_MODE_EVT_RISING_FALLING) ||\
+ ((MODE) == GPIO_MODE_ANALOG))
+
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_speed GPIO speed
+ * @brief GPIO Output Maximum frequency
+ * @{
+ */
+#define GPIO_SPEED_LOW ((uint32_t)0x00000000) /*!< Low speed */
+#define GPIO_SPEED_MEDIUM ((uint32_t)0x00000001) /*!< Medium speed */
+#define GPIO_SPEED_HIGH ((uint32_t)0x00000003) /*!< High speed */
+
+#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_SPEED_LOW) || ((SPEED) == GPIO_SPEED_MEDIUM) || \
+ ((SPEED) == GPIO_SPEED_HIGH))
+/**
+ * @}
+ */
+
+ /** @defgroup GPIO_pull GPIO pull
+ * @brief GPIO Pull-Up or Pull-Down Activation
+ * @{
+ */
+#define GPIO_NOPULL ((uint32_t)0x00000000) /*!< No Pull-up or Pull-down activation */
+#define GPIO_PULLUP ((uint32_t)0x00000001) /*!< Pull-up activation */
+#define GPIO_PULLDOWN ((uint32_t)0x00000002) /*!< Pull-down activation */
+
+#define IS_GPIO_PULL(PULL) (((PULL) == GPIO_NOPULL) || ((PULL) == GPIO_PULLUP) || \
+ ((PULL) == GPIO_PULLDOWN))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup GPIO_Exported_Macros GPIO Exported Macros
+ * @{
+ */
+
+/**
+ * @brief Checks whether the specified EXTI line flag is set or not.
+ * @param __EXTI_LINE__: specifies the EXTI line flag to check.
+ * This parameter can be GPIO_PIN_x where x can be(0..15)
+ * @retval The new state of __EXTI_LINE__ (SET or RESET).
+ */
+#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
+
+/**
+ * @brief Clears the EXTI's line pending flags.
+ * @param __EXTI_LINE__: specifies the EXTI lines flags to clear.
+ * This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+ * @retval None
+ */
+#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
+
+/**
+ * @brief Checks whether the specified EXTI line is asserted or not.
+ * @param __EXTI_LINE__: specifies the EXTI line to check.
+ * This parameter can be GPIO_PIN_x where x can be(0..15)
+ * @retval The new state of __EXTI_LINE__ (SET or RESET).
+ */
+#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
+
+/**
+ * @brief Clears the EXTI's line pending bits.
+ * @param __EXTI_LINE__: specifies the EXTI lines to clear.
+ * This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+ * @retval None
+ */
+#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
+
+/**
+ * @brief Generates a Software interrupt on selected EXTI line.
+ * @param __EXTI_LINE__: specifies the EXTI line to check.
+ * This parameter can be GPIO_PIN_x where x can be(0..15)
+ * @retval None
+ */
+#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__))
+
+/**
+ * @}
+ */
+
+/* Include GPIO HAL Extension module */
+#include "stm32f0xx_hal_gpio_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup GPIO_Exported_Functions GPIO Exported Functions
+ * @{
+ */
+
+/** @addtogroup GPIO_Exported_Functions_Group1 Initialization/de-initialization functions
+ * @brief Initialization and Configuration functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions *****************************/
+void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init);
+void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin);
+
+/**
+ * @}
+ */
+
+/** @addtogroup GPIO_Exported_Functions_Group2 IO operation functions
+ * @{
+ */
+
+/* IO operation functions *****************************************************/
+GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState);
+void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin);
+void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_GPIO_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/include/stm32f0xx_hal_gpio_ex.h b/f0/include/stm32f0xx_hal_gpio_ex.h
new file mode 100755
index 0000000000000000000000000000000000000000..0b0e1caa7f928d621af9bd52d23d974360f0e2ed
--- /dev/null
+++ b/f0/include/stm32f0xx_hal_gpio_ex.h
@@ -0,0 +1,812 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_gpio_ex.h
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief Header file of GPIO HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_GPIO_EX_H
+#define __STM32F0xx_HAL_GPIO_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup GPIOEx GPIOEx Extended HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup GPIOEx_Exported_Constants GPIOEx Exported Constants
+ * @{
+ */
+
+/** @defgroup GPIOEx_Alternate_function_selection GPIOEx Alternate function selection
+ * @{
+ */
+
+#if defined (STM32F030x6)
+/*------------------------- STM32F030x6---------------------------*/
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< AF0: EVENTOUT Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< AF0: MCO Alternate Function mapping */
+#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< AF0: SPI1 Alternate Function mapping */
+#define GPIO_AF0_TIM17 ((uint8_t)0x00) /*!< AF0: TIM17 Alternate Function mapping */
+#define GPIO_AF0_SWDIO ((uint8_t)0x00) /*!< AF0: SWDIO Alternate Function mapping */
+#define GPIO_AF0_SWCLK ((uint8_t)0x00) /*!< AF0: SWCLK Alternate Function mapping */
+#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< AF0: TIM14 Alternate Function mapping */
+#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< AF0: USART1 Alternate Function mapping */
+#define GPIO_AF0_IR ((uint8_t)0x00) /*!< AF0: IR Alternate Function mapping */
+
+/* AF 1 */
+#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< AF1: TIM3 Alternate Function mapping */
+#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< AF1: USART1 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /*!< AF1: EVENTOUT Alternate Function mapping */
+#define GPIO_AF1_I2C1 ((uint8_t)0x01) /*!< AF1: I2C1 Alternate Function mapping */
+
+/* AF 2 */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< AF2: TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< AF2: TIM16 Alternate Function mapping */
+#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< AF2: TIM17 Alternate Function mapping */
+#define GPIO_AF2_EVENTOUT ((uint8_t)0x02) /*!< AF2: EVENTOUT Alternate Function mapping */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT ((uint8_t)0x03) /*!< AF3: EVENTOUT Alternate Function mapping */
+#define GPIO_AF3_I2C1 ((uint8_t)0x03) /*!< AF3: I2C1 Alternate Function mapping */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< AF4: TIM14 Alternate Function mapping */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /*!< AF4: I2C1 Alternate Function mapping */
+
+/* AF 5 */
+#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< AF5: TIM16 Alternate Function mapping */
+#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< AF5: TIM17 Alternate Function mapping */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT ((uint8_t)0x06) /*!< AF6: EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x06)
+
+#endif /* STM32F030x6 */
+
+/*---------------------------------- STM32F030x8 -------------------------------------------*/
+#if defined (STM32F030x8)
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< AF0: EVENTOUT Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< AF0: MCO Alternate Function mapping */
+#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< AF0: SPI1 Alternate Function mapping */
+#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< AF0: SPI2 Alternate Function mapping */
+#define GPIO_AF0_TIM15 ((uint8_t)0x00) /*!< AF0: TIM15 Alternate Function mapping */
+#define GPIO_AF0_TIM17 ((uint8_t)0x00) /*!< AF0: TIM17 Alternate Function mapping */
+#define GPIO_AF0_SWDIO ((uint8_t)0x00) /*!< AF0: SWDIO Alternate Function mapping */
+#define GPIO_AF0_SWCLK ((uint8_t)0x00) /*!< AF0: SWCLK Alternate Function mapping */
+#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< AF0: TIM14 Alternate Function mapping */
+#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< AF0: USART1 Alternate Function mapping */
+#define GPIO_AF0_IR ((uint8_t)0x00) /*!< AF0: IR Alternate Function mapping */
+
+/* AF 1 */
+#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< AF1: TIM3 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01) /*!< AF1: TIM15 Alternate Function mapping */
+#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< AF1: USART1 Alternate Function mapping */
+#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< AF1: USART2 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /*!< AF1: EVENTOUT Alternate Function mapping */
+#define GPIO_AF1_I2C1 ((uint8_t)0x01) /*!< AF1: I2C1 Alternate Function mapping */
+#define GPIO_AF1_I2C2 ((uint8_t)0x01) /*!< AF1: I2C2 Alternate Function mapping */
+#define GPIO_AF1_IR ((uint8_t)0x01) /*!< AF1: IR Alternate Function mapping */
+
+/* AF 2 */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< AF2: TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< AF2: TIM16 Alternate Function mapping */
+#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< AF2: TIM17 Alternate Function mapping */
+#define GPIO_AF2_EVENTOUT ((uint8_t)0x02) /*!< AF2: EVENTOUT Alternate Function mapping */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT ((uint8_t)0x03) /*!< AF3: EVENTOUT Alternate Function mapping */
+#define GPIO_AF3_I2C1 ((uint8_t)0x03) /*!< AF3: I2C1 Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03) /*!< AF3: TIM15 Alternate Function mapping */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< AF4: TIM14 Alternate Function mapping */
+
+/* AF 5 */
+#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< AF5: TIM16 Alternate Function mapping */
+#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< AF5: TIM17 Alternate Function mapping */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT ((uint8_t)0x06) /*!< AF6: EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x06)
+
+#endif /* STM32F030x8 */
+
+#if defined (STM32F031x6) || defined (STM32F038xx)
+/*--------------------------- STM32F031x6/STM32F038xx ---------------------------*/
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< AF0: EVENTOUT Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< AF0: MCO Alternate Function mapping */
+#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< AF0: SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF0_TIM17 ((uint8_t)0x00) /*!< AF0: TIM17 Alternate Function mapping */
+#define GPIO_AF0_SWDAT ((uint8_t)0x00) /*!< AF0: SWDAT Alternate Function mapping */
+#define GPIO_AF0_SWCLK ((uint8_t)0x00) /*!< AF0: SWCLK Alternate Function mapping */
+#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< AF0: TIM14 Alternate Function mapping */
+#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< AF0: USART1 Alternate Function mapping */
+#define GPIO_AF0_IR ((uint8_t)0x00) /*!< AF0: IR Alternate Function mapping */
+
+/* AF 1 */
+#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< AF1: TIM3 Alternate Function mapping */
+#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< AF1: USART1 Alternate Function mapping */
+#define GPIO_AF1_IR ((uint8_t)0x01) /*!< AF1: IR Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /*!< AF1: EVENTOUT Alternate Function mapping */
+#define GPIO_AF1_I2C1 ((uint8_t)0x01) /*!< AF1: I2C1 Alternate Function mapping */
+
+/* AF 2 */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< AF2: TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM2 ((uint8_t)0x02) /*!< AF2: TIM2 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< AF2: TIM16 Alternate Function mapping */
+#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< AF2: TIM17 Alternate Function mapping */
+#define GPIO_AF2_EVENTOUT ((uint8_t)0x02) /*!< AF2: EVENTOUT Alternate Function mapping */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT ((uint8_t)0x03) /*!< AF3: EVENTOUT Alternate Function mapping */
+#define GPIO_AF3_I2C1 ((uint8_t)0x03) /*!< AF3: I2C1 Alternate Function mapping */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< AF4: TIM14 Alternate Function mapping */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /*!< AF4: I2C1 Alternate Function mapping */
+
+/* AF 5 */
+#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< AF5: TIM16 Alternate Function mapping */
+#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< AF5: TIM17 Alternate Function mapping */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT ((uint8_t)0x06) /*!< AF6: EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x06)
+
+#endif /* STM32F031x6 || STM32F038xx */
+
+#if defined (STM32F051x8) || defined (STM32F058xx)
+/*--------------------------- STM32F051x8/STM32F058xx---------------------------*/
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< AF0: EVENTOUT Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< AF0: MCO Alternate Function mapping */
+#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< AF0: SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< AF0: SPI2 Alternate Function mapping */
+#define GPIO_AF0_TIM15 ((uint8_t)0x00) /*!< AF0: TIM15 Alternate Function mapping */
+#define GPIO_AF0_TIM17 ((uint8_t)0x00) /*!< AF0: TIM17 Alternate Function mapping */
+#define GPIO_AF0_SWDIO ((uint8_t)0x00) /*!< AF0: SWDIO Alternate Function mapping */
+#define GPIO_AF0_SWCLK ((uint8_t)0x00) /*!< AF0: SWCLK Alternate Function mapping */
+#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< AF0: TIM14 Alternate Function mapping */
+#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< AF0: USART1 Alternate Function mapping */
+#define GPIO_AF0_IR ((uint8_t)0x00) /*!< AF0: IR Alternate Function mapping */
+#define GPIO_AF0_CEC ((uint8_t)0x00) /*!< AF0: CEC Alternate Function mapping */
+
+/* AF 1 */
+#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< AF1: TIM3 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01) /*!< AF1: TIM15 Alternate Function mapping */
+#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< AF1: USART1 Alternate Function mapping */
+#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< AF1: USART2 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /*!< AF1: EVENTOUT Alternate Function mapping */
+#define GPIO_AF1_I2C1 ((uint8_t)0x01) /*!< AF1: I2C1 Alternate Function mapping */
+#define GPIO_AF1_I2C2 ((uint8_t)0x01) /*!< AF1: I2C2 Alternate Function mapping */
+#define GPIO_AF1_IR ((uint8_t)0x01) /*!< AF1: IR Alternate Function mapping */
+#define GPIO_AF1_CEC ((uint8_t)0x01) /*!< AF1: CEC Alternate Function mapping */
+
+/* AF 2 */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< AF2: TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM2 ((uint8_t)0x02) /*!< AF2: TIM2 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< AF2: TIM16 Alternate Function mapping */
+#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< AF2: TIM17 Alternate Function mapping */
+#define GPIO_AF2_EVENTOUT ((uint8_t)0x02) /*!< AF2: EVENTOUT Alternate Function mapping */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT ((uint8_t)0x03) /*!< AF3: EVENTOUT Alternate Function mapping */
+#define GPIO_AF3_I2C1 ((uint8_t)0x03) /*!< AF3: I2C1 Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03) /*!< AF3: TIM15 Alternate Function mapping */
+#define GPIO_AF3_TSC ((uint8_t)0x03) /*!< AF3: TSC Alternate Function mapping */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< AF4: TIM14 Alternate Function mapping */
+
+/* AF 5 */
+#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< AF5: TIM16 Alternate Function mapping */
+#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< AF5: TIM17 Alternate Function mapping */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT ((uint8_t)0x06) /*!< AF6: EVENTOUT Alternate Function mapping */
+
+/* AF 7 */
+#define GPIO_AF7_COMP1 ((uint8_t)0x07) /*!< AF7: COMP1 Alternate Function mapping */
+#define GPIO_AF7_COMP2 ((uint8_t)0x07) /*!< AF7: COMP2 Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x07)
+
+#endif /* STM32F051x8/STM32F058xx */
+
+#if defined (STM32F071xB)
+/*--------------------------- STM32F071xB ---------------------------*/
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< AF0: AEVENTOUT Alternate Function mapping */
+#define GPIO_AF0_SWDIO ((uint8_t)0x00) /*!< AF0: SWDIO Alternate Function mapping */
+#define GPIO_AF0_SWCLK ((uint8_t)0x00) /*!< AF0: SWCLK Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< AF0: MCO Alternate Function mapping */
+#define GPIO_AF0_CEC ((uint8_t)0x00) /*!< AF0: CEC Alternate Function mapping */
+#define GPIO_AF0_CRS ((uint8_t)0x00) /*!< AF0: CRS Alternate Function mapping */
+#define GPIO_AF0_IR ((uint8_t)0x00) /*!< AF0: IR Alternate Function mapping */
+#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< AF0: SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< AF0: SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF0_TIM1 ((uint8_t)0x00) /*!< AF0: TIM1 Alternate Function mapping */
+#define GPIO_AF0_TIM3 ((uint8_t)0x00) /*!< AF0: TIM3 Alternate Function mapping */
+#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< AF0: TIM14 Alternate Function mapping */
+#define GPIO_AF0_TIM15 ((uint8_t)0x00) /*!< AF0: TIM15 Alternate Function mapping */
+#define GPIO_AF0_TIM16 ((uint8_t)0x00) /*!< AF0: TIM16 Alternate Function mapping */
+#define GPIO_AF0_TIM17 ((uint8_t)0x00) /*!< AF0: TIM17 Alternate Function mapping */
+#define GPIO_AF0_TSC ((uint8_t)0x00) /*!< AF0: TSC Alternate Function mapping */
+#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< AF0: USART1 Alternate Function mapping */
+#define GPIO_AF0_USART2 ((uint8_t)0x00) /*!< AF0: USART2 Alternate Function mapping */
+#define GPIO_AF0_USART3 ((uint8_t)0x00) /*!< AF0: USART3 Alternate Function mapping */
+#define GPIO_AF0_USART4 ((uint8_t)0x00) /*!< AF0: USART4 Alternate Function mapping */
+
+/* AF 1 */
+#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< AF1: TIM3 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01) /*!< AF1: TIM15 Alternate Function mapping */
+#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< AF1: USART1 Alternate Function mapping */
+#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< AF1: USART2 Alternate Function mapping */
+#define GPIO_AF1_USART3 ((uint8_t)0x01) /*!< AF1: USART3 Alternate Function mapping */
+#define GPIO_AF1_IR ((uint8_t)0x01) /*!< AF1: IR Alternate Function mapping */
+#define GPIO_AF1_CEC ((uint8_t)0x01) /*!< AF1: CEC Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /*!< AF1: EVENTOUT Alternate Function mapping */
+#define GPIO_AF1_I2C1 ((uint8_t)0x01) /*!< AF1: I2C1 Alternate Function mapping */
+#define GPIO_AF1_I2C2 ((uint8_t)0x01) /*!< AF1: I2C2 Alternate Function mapping */
+#define GPIO_AF1_TSC ((uint8_t)0x01) /*!< AF1: TSC Alternate Function mapping */
+#define GPIO_AF1_SPI1 ((uint8_t)0x01) /*!< AF1: SPI1 Alternate Function mapping */
+#define GPIO_AF1_SPI2 ((uint8_t)0x01) /*!< AF1: SPI2 Alternate Function mapping */
+
+/* AF 2 */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< AF2: TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM2 ((uint8_t)0x02) /*!< AF2: TIM2 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< AF2: TIM16 Alternate Function mapping */
+#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< AF2: TIM17 Alternate Function mapping */
+#define GPIO_AF2_EVENTOUT ((uint8_t)0x02) /*!< AF2: EVENTOUT Alternate Function mapping */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT ((uint8_t)0x03) /*!< AF3: EVENTOUT Alternate Function mapping */
+#define GPIO_AF3_TSC ((uint8_t)0x03) /*!< AF3: TSC Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03) /*!< AF3: TIM15 Alternate Function mapping */
+#define GPIO_AF3_I2C1 ((uint8_t)0x03) /*!< AF3: I2C1 Alternate Function mapping */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< AF4: TIM14 Alternate Function mapping */
+#define GPIO_AF4_USART4 ((uint8_t)0x04) /*!< AF4: USART4 Alternate Function mapping */
+#define GPIO_AF4_USART3 ((uint8_t)0x04) /*!< AF4: USART3 Alternate Function mapping */
+#define GPIO_AF4_CRS ((uint8_t)0x04) /*!< AF4: CRS Alternate Function mapping */
+
+/* AF 5 */
+#define GPIO_AF5_TIM15 ((uint8_t)0x05) /*!< AF5: TIM15 Alternate Function mapping */
+#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< AF5: TIM16 Alternate Function mapping */
+#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< AF5: TIM17 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< AF5: SPI2 Alternate Function mapping */
+#define GPIO_AF5_I2C2 ((uint8_t)0x05) /*!< AF5: I2C2 Alternate Function mapping */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT ((uint8_t)0x06) /*!< AF6: EVENTOUT Alternate Function mapping */
+
+/* AF 7 */
+#define GPIO_AF7_COMP1 ((uint8_t)0x07) /*!< AF7: COMP1 Alternate Function mapping */
+#define GPIO_AF7_COMP2 ((uint8_t)0x07) /*!< AF7: COMP2 Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x07)
+
+#endif /* STM32F071xB */
+
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+/*--------------------------- STM32F091xC || STM32F098xx ------------------------------*/
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< AF0: EVENTOUT Alternate Function mapping */
+#define GPIO_AF0_SWDIO ((uint8_t)0x00) /*!< AF0: SWDIO Alternate Function mapping */
+#define GPIO_AF0_SWCLK ((uint8_t)0x00) /*!< AF0: SWCLK Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< AF0: MCO Alternate Function mapping */
+#define GPIO_AF0_CEC ((uint8_t)0x00) /*!< AF0: CEC Alternate Function mapping */
+#define GPIO_AF0_CRS ((uint8_t)0x00) /*!< AF0: CRS Alternate Function mapping */
+#define GPIO_AF0_IR ((uint8_t)0x00) /*!< AF0: IR Alternate Function mapping */
+#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< AF0: SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< AF0: SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF0_TIM1 ((uint8_t)0x00) /*!< AF0: TIM1 Alternate Function mapping */
+#define GPIO_AF0_TIM3 ((uint8_t)0x00) /*!< AF0: TIM3 Alternate Function mapping */
+#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< AF0: TIM14 Alternate Function mapping */
+#define GPIO_AF0_TIM15 ((uint8_t)0x00) /*!< AF0: TIM15 Alternate Function mapping */
+#define GPIO_AF0_TIM16 ((uint8_t)0x00) /*!< AF0: TIM16 Alternate Function mapping */
+#define GPIO_AF0_TIM17 ((uint8_t)0x00) /*!< AF0: TIM17 Alternate Function mapping */
+#define GPIO_AF0_TSC ((uint8_t)0x00) /*!< AF0: TSC Alternate Function mapping */
+#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< AF0: USART1 Alternate Function mapping */
+#define GPIO_AF0_USART2 ((uint8_t)0x00) /*!< AF0: USART2 Alternate Function mapping */
+#define GPIO_AF0_USART3 ((uint8_t)0x00) /*!< AF0: USART3 Alternate Function mapping */
+#define GPIO_AF0_USART4 ((uint8_t)0x00) /*!< AF0: USART4 Alternate Function mapping */
+#define GPIO_AF0_USART8 ((uint8_t)0x00) /*!< AF0: USART8 Alternate Function mapping */
+#define GPIO_AF0_CAN ((uint8_t)0x00) /*!< AF0: CAN Alternate Function mapping */
+
+/* AF 1 */
+#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< AF1: TIM3 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01) /*!< AF1: TIM15 Alternate Function mapping */
+#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< AF1: USART1 Alternate Function mapping */
+#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< AF1: USART2 Alternate Function mapping */
+#define GPIO_AF1_USART3 ((uint8_t)0x01) /*!< AF1: USART3 Alternate Function mapping */
+#define GPIO_AF1_USART4 ((uint8_t)0x01) /*!< AF1: USART4 Alternate Function mapping */
+#define GPIO_AF1_USART5 ((uint8_t)0x01) /*!< AF1: USART5 Alternate Function mapping */
+#define GPIO_AF1_USART6 ((uint8_t)0x01) /*!< AF1: USART6 Alternate Function mapping */
+#define GPIO_AF1_USART7 ((uint8_t)0x01) /*!< AF1: USART7 Alternate Function mapping */
+#define GPIO_AF1_USART8 ((uint8_t)0x01) /*!< AF1: USART8 Alternate Function mapping */
+#define GPIO_AF1_IR ((uint8_t)0x01) /*!< AF1: IR Alternate Function mapping */
+#define GPIO_AF1_CEC ((uint8_t)0x01) /*!< AF1: CEC Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /*!< AF1: EVENTOUT Alternate Function mapping */
+#define GPIO_AF1_I2C1 ((uint8_t)0x01) /*!< AF1: I2C1 Alternate Function mapping */
+#define GPIO_AF1_I2C2 ((uint8_t)0x01) /*!< AF1: I2C2 Alternate Function mapping */
+#define GPIO_AF1_TSC ((uint8_t)0x01) /*!< AF1: TSC Alternate Function mapping */
+#define GPIO_AF1_SPI1 ((uint8_t)0x01) /*!< AF1: SPI1 Alternate Function mapping */
+#define GPIO_AF1_SPI2 ((uint8_t)0x01) /*!< AF1: SPI2 Alternate Function mapping */
+
+/* AF 2 */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< AF2: TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM2 ((uint8_t)0x02) /*!< AF2: TIM2 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< AF2: TIM16 Alternate Function mapping */
+#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< AF2: TIM17 Alternate Function mapping */
+#define GPIO_AF2_EVENTOUT ((uint8_t)0x02) /*!< AF2: EVENTOUT Alternate Function mapping */
+#define GPIO_AF2_USART5 ((uint8_t)0x02) /*!< AF2: USART5 Alternate Function mapping */
+#define GPIO_AF2_USART6 ((uint8_t)0x02) /*!< AF2: USART6 Alternate Function mapping */
+#define GPIO_AF2_USART7 ((uint8_t)0x02) /*!< AF2: USART7 Alternate Function mapping */
+#define GPIO_AF2_USART8 ((uint8_t)0x02) /*!< AF2: USART8 Alternate Function mapping */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT ((uint8_t)0x03) /*!< AF3: EVENTOUT Alternate Function mapping */
+#define GPIO_AF3_TSC ((uint8_t)0x03) /*!< AF3: TSC Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03) /*!< AF3: TIM15 Alternate Function mapping */
+#define GPIO_AF3_I2C1 ((uint8_t)0x03) /*!< AF3: I2C1 Alternate Function mapping */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< AF4: TIM14 Alternate Function mapping */
+#define GPIO_AF4_USART4 ((uint8_t)0x04) /*!< AF4: USART4 Alternate Function mapping */
+#define GPIO_AF4_USART3 ((uint8_t)0x04) /*!< AF4: USART3 Alternate Function mapping */
+#define GPIO_AF4_CRS ((uint8_t)0x04) /*!< AF4: CRS Alternate Function mapping */
+#define GPIO_AF4_CAN ((uint8_t)0x04) /*!< AF4: CAN Alternate Function mapping */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /*!< AF4: I2C1 Alternate Function mapping */
+#define GPIO_AF4_USART5 ((uint8_t)0x04) /*!< AF4: USART5 Alternate Function mapping */
+
+/* AF 5 */
+#define GPIO_AF5_TIM15 ((uint8_t)0x05) /*!< AF5: TIM15 Alternate Function mapping */
+#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< AF5: TIM16 Alternate Function mapping */
+#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< AF5: TIM17 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< AF5: SPI2 Alternate Function mapping */
+#define GPIO_AF5_I2C2 ((uint8_t)0x05) /*!< AF5: I2C2 Alternate Function mapping */
+#define GPIO_AF5_MCO ((uint8_t)0x05) /*!< AF5: MCO Alternate Function mapping */
+#define GPIO_AF5_USART6 ((uint8_t)0x05) /*!< AF5: USART6 Alternate Function mapping */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT ((uint8_t)0x06) /*!< AF6: EVENTOUT Alternate Function mapping */
+
+/* AF 7 */
+#define GPIO_AF7_COMP1 ((uint8_t)0x07) /*!< AF7: COMP1 Alternate Function mapping */
+#define GPIO_AF7_COMP2 ((uint8_t)0x07) /*!< AF7: COMP2 Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x07)
+
+#endif /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F030xC)
+/*--------------------------- STM32F030xC ----------------------------------------------------*/
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< AF0: EVENTOUT Alternate Function mapping */
+#define GPIO_AF0_SWDIO ((uint8_t)0x00) /*!< AF0: SWDIO Alternate Function mapping */
+#define GPIO_AF0_SWCLK ((uint8_t)0x00) /*!< AF0: SWCLK Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< AF0: MCO Alternate Function mapping */
+#define GPIO_AF0_IR ((uint8_t)0x00) /*!< AF0: IR Alternate Function mapping */
+#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< AF0: SPI1 Alternate Function mapping */
+#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< AF0: SPI2 Alternate Function mapping */
+#define GPIO_AF0_TIM3 ((uint8_t)0x00) /*!< AF0: TIM3 Alternate Function mapping */
+#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< AF0: TIM14 Alternate Function mapping */
+#define GPIO_AF0_TIM15 ((uint8_t)0x00) /*!< AF0: TIM15 Alternate Function mapping */
+#define GPIO_AF0_TIM17 ((uint8_t)0x00) /*!< AF0: TIM17 Alternate Function mapping */
+#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< AF0: USART1 Alternate Function mapping */
+#define GPIO_AF0_USART4 ((uint8_t)0x00) /*!< AF0: USART4 Alternate Function mapping */
+
+/* AF 1 */
+#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< AF1: TIM3 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01) /*!< AF1: TIM15 Alternate Function mapping */
+#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< AF1: USART1 Alternate Function mapping */
+#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< AF1: USART2 Alternate Function mapping */
+#define GPIO_AF1_USART3 ((uint8_t)0x01) /*!< AF1: USART3 Alternate Function mapping */
+#define GPIO_AF1_IR ((uint8_t)0x01) /*!< AF1: IR Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /*!< AF1: EVENTOUT Alternate Function mapping */
+#define GPIO_AF1_I2C1 ((uint8_t)0x01) /*!< AF1: I2C1 Alternate Function mapping */
+#define GPIO_AF1_I2C2 ((uint8_t)0x01) /*!< AF1: I2C2 Alternate Function mapping */
+#define GPIO_AF1_SPI2 ((uint8_t)0x01) /*!< AF1: SPI2 Alternate Function mapping */
+
+/* AF 2 */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< AF2: TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< AF2: TIM16 Alternate Function mapping */
+#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< AF2: TIM17 Alternate Function mapping */
+#define GPIO_AF2_EVENTOUT ((uint8_t)0x02) /*!< AF2: EVENTOUT Alternate Function mapping */
+#define GPIO_AF2_USART5 ((uint8_t)0x02) /*!< AF2: USART5 Alternate Function mapping */
+#define GPIO_AF2_USART6 ((uint8_t)0x02) /*!< AF2: USART6 Alternate Function mapping */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT ((uint8_t)0x03) /*!< AF3: EVENTOUT Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03) /*!< AF3: TIM15 Alternate Function mapping */
+#define GPIO_AF3_I2C1 ((uint8_t)0x03) /*!< AF3: I2C1 Alternate Function mapping */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< AF4: TIM14 Alternate Function mapping */
+#define GPIO_AF4_USART4 ((uint8_t)0x04) /*!< AF4: USART4 Alternate Function mapping */
+#define GPIO_AF4_USART3 ((uint8_t)0x04) /*!< AF4: USART3 Alternate Function mapping */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /*!< AF4: I2C1 Alternate Function mapping */
+#define GPIO_AF4_USART5 ((uint8_t)0x04) /*!< AF4: USART5 Alternate Function mapping */
+
+/* AF 5 */
+#define GPIO_AF5_TIM15 ((uint8_t)0x05) /*!< AF5: TIM15 Alternate Function mapping */
+#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< AF5: TIM16 Alternate Function mapping */
+#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< AF5: TIM17 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< AF5: SPI2 Alternate Function mapping */
+#define GPIO_AF5_I2C2 ((uint8_t)0x05) /*!< AF5: I2C2 Alternate Function mapping */
+#define GPIO_AF5_MCO ((uint8_t)0x05) /*!< AF5: MCO Alternate Function mapping */
+#define GPIO_AF5_USART6 ((uint8_t)0x05) /*!< AF5: USART6 Alternate Function mapping */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT ((uint8_t)0x06) /*!< AF6: EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x06)
+
+#endif /* STM32F030xC */
+
+#if defined (STM32F072xB) || defined (STM32F078xx)
+/*--------------------------- STM32F072xB/STM32F078xx ---------------------------*/
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< AF0: EVENTOUT Alternate Function mapping */
+#define GPIO_AF0_SWDIO ((uint8_t)0x00) /*!< AF0: SWDIO Alternate Function mapping */
+#define GPIO_AF0_SWCLK ((uint8_t)0x00) /*!< AF0: SWCLK Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< AF0: MCO Alternate Function mapping */
+#define GPIO_AF0_CEC ((uint8_t)0x00) /*!< AF0: CEC Alternate Function mapping */
+#define GPIO_AF0_CRS ((uint8_t)0x00) /*!< AF0: CRS Alternate Function mapping */
+#define GPIO_AF0_IR ((uint8_t)0x00) /*!< AF0: IR Alternate Function mapping */
+#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< AF0: SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< AF0: SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF0_TIM1 ((uint8_t)0x00) /*!< AF0: TIM1 Alternate Function mapping */
+#define GPIO_AF0_TIM3 ((uint8_t)0x00) /*!< AF0: TIM3 Alternate Function mapping */
+#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< AF0: TIM14 Alternate Function mapping */
+#define GPIO_AF0_TIM15 ((uint8_t)0x00) /*!< AF0: TIM15 Alternate Function mapping */
+#define GPIO_AF0_TIM16 ((uint8_t)0x00) /*!< AF0: TIM16 Alternate Function mapping */
+#define GPIO_AF0_TIM17 ((uint8_t)0x00) /*!< AF0: TIM17 Alternate Function mapping */
+#define GPIO_AF0_TSC ((uint8_t)0x00) /*!< AF0: TSC Alternate Function mapping */
+#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< AF0: USART1 Alternate Function mapping */
+#define GPIO_AF0_USART2 ((uint8_t)0x00) /*!< AF0: USART2 Alternate Function mapping */
+#define GPIO_AF0_USART3 ((uint8_t)0x00) /*!< AF0: USART2 Alternate Function mapping */
+#define GPIO_AF0_USART4 ((uint8_t)0x00) /*!< AF0: USART4 Alternate Function mapping */
+#define GPIO_AF0_CAN ((uint8_t)0x00) /*!< AF0: CAN Alternate Function mapping */
+
+/* AF 1 */
+#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< AF1: TIM3 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01) /*!< AF1: TIM15 Alternate Function mapping */
+#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< AF1: USART1 Alternate Function mapping */
+#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< AF1: USART2 Alternate Function mapping */
+#define GPIO_AF1_USART3 ((uint8_t)0x01) /*!< AF1: USART3 Alternate Function mapping */
+#define GPIO_AF1_IR ((uint8_t)0x01) /*!< AF1: IR Alternate Function mapping */
+#define GPIO_AF1_CEC ((uint8_t)0x01) /*!< AF1: CEC Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /*!< AF1: EVENTOUT Alternate Function mapping */
+#define GPIO_AF1_I2C1 ((uint8_t)0x01) /*!< AF1: I2C1 Alternate Function mapping */
+#define GPIO_AF1_I2C2 ((uint8_t)0x01) /*!< AF1: I2C1 Alternate Function mapping */
+#define GPIO_AF1_TSC ((uint8_t)0x01) /*!< AF1: I2C1 Alternate Function mapping */
+#define GPIO_AF1_SPI1 ((uint8_t)0x01) /*!< AF1: SPI1 Alternate Function mapping */
+#define GPIO_AF1_SPI2 ((uint8_t)0x01) /*!< AF1: SPI2 Alternate Function mapping */
+
+/* AF 2 */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< AF2: TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM2 ((uint8_t)0x02) /*!< AF2: TIM2 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< AF2: TIM16 Alternate Function mapping */
+#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< AF2: TIM17 Alternate Function mapping */
+#define GPIO_AF2_EVENTOUT ((uint8_t)0x02) /*!< AF2: EVENTOUT Alternate Function mapping */
+#define GPIO_AF2_USB ((uint8_t)0x02) /*!< AF2: USB Alternate Function mapping */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT ((uint8_t)0x03) /*!< AF3: EVENTOUT Alternate Function mapping */
+#define GPIO_AF3_TSC ((uint8_t)0x03) /*!< AF3: TSC Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03) /*!< AF3: TIM15 Alternate Function mapping */
+#define GPIO_AF3_I2C1 ((uint8_t)0x03) /*!< AF3: I2C1 Alternate Function mapping */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< AF4: TIM14 Alternate Function mapping */
+#define GPIO_AF4_USART4 ((uint8_t)0x04) /*!< AF4: USART4 Alternate Function mapping */
+#define GPIO_AF4_USART3 ((uint8_t)0x04) /*!< AF4: USART3 Alternate Function mapping */
+#define GPIO_AF4_CRS ((uint8_t)0x04) /*!< AF4: CRS Alternate Function mapping */
+#define GPIO_AF4_CAN ((uint8_t)0x04) /*!< AF4: CAN Alternate Function mapping */
+
+/* AF 5 */
+#define GPIO_AF5_TIM15 ((uint8_t)0x05) /*!< AF5: TIM15 Alternate Function mapping */
+#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< AF5: TIM16 Alternate Function mapping */
+#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< AF5: TIM17 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< AF5: SPI2 Alternate Function mapping */
+#define GPIO_AF5_I2C2 ((uint8_t)0x05) /*!< AF5: I2C2 Alternate Function mapping */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT ((uint8_t)0x06) /*!< AF6: EVENTOUT Alternate Function mapping */
+
+/* AF 7 */
+#define GPIO_AF7_COMP1 ((uint8_t)0x07) /*!< AF7: COMP1 Alternate Function mapping */
+#define GPIO_AF7_COMP2 ((uint8_t)0x07) /*!< AF7: COMP2 Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x07)
+
+#endif /* STM32F072xB || STM32F078xx */
+
+#if defined (STM32F070xB)
+/*---------------------------------- STM32F070xB ---------------------------------------------*/
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< AF0: EVENTOUT Alternate Function mapping */
+#define GPIO_AF0_SWDIO ((uint8_t)0x00) /*!< AF0: SWDIO Alternate Function mapping */
+#define GPIO_AF0_SWCLK ((uint8_t)0x00) /*!< AF0: SWCLK Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< AF0: MCO Alternate Function mapping */
+#define GPIO_AF0_IR ((uint8_t)0x00) /*!< AF0: IR Alternate Function mapping */
+#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< AF0: SPI1 Alternate Function mapping */
+#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< AF0: SPI2 Alternate Function mapping */
+#define GPIO_AF0_TIM3 ((uint8_t)0x00) /*!< AF0: TIM3 Alternate Function mapping */
+#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< AF0: TIM14 Alternate Function mapping */
+#define GPIO_AF0_TIM15 ((uint8_t)0x00) /*!< AF0: TIM15 Alternate Function mapping */
+#define GPIO_AF0_TIM17 ((uint8_t)0x00) /*!< AF0: TIM17 Alternate Function mapping */
+#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< AF0: USART1 Alternate Function mapping */
+#define GPIO_AF0_USART4 ((uint8_t)0x00) /*!< AF0: USART4 Alternate Function mapping */
+
+/* AF 1 */
+#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< AF1: TIM3 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01) /*!< AF1: TIM15 Alternate Function mapping */
+#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< AF1: USART1 Alternate Function mapping */
+#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< AF1: USART2 Alternate Function mapping */
+#define GPIO_AF1_USART3 ((uint8_t)0x01) /*!< AF1: USART4 Alternate Function mapping */
+#define GPIO_AF1_IR ((uint8_t)0x01) /*!< AF1: IR Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /*!< AF1: EVENTOUT Alternate Function mapping */
+#define GPIO_AF1_I2C1 ((uint8_t)0x01) /*!< AF1: I2C1 Alternate Function mapping */
+#define GPIO_AF1_I2C2 ((uint8_t)0x01) /*!< AF1: I2C1 Alternate Function mapping */
+#define GPIO_AF1_SPI2 ((uint8_t)0x01) /*!< AF1: SPI2 Alternate Function mapping */
+
+/* AF 2 */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< AF2: TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< AF2: TIM16 Alternate Function mapping */
+#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< AF2: TIM17 Alternate Function mapping */
+#define GPIO_AF2_EVENTOUT ((uint8_t)0x02) /*!< AF2: EVENTOUT Alternate Function mapping */
+#define GPIO_AF2_USB ((uint8_t)0x02) /*!< AF2: USB Alternate Function mapping */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT ((uint8_t)0x03) /*!< AF3: EVENTOUT Alternate Function mapping */
+#define GPIO_AF3_I2C1 ((uint8_t)0x03) /*!< AF3: I2C1 Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03) /*!< AF3: TIM15 Alternate Function mapping */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< AF4: TIM14 Alternate Function mapping */
+#define GPIO_AF4_USART4 ((uint8_t)0x04) /*!< AF4: USART4 Alternate Function mapping */
+#define GPIO_AF4_USART3 ((uint8_t)0x04) /*!< AF4: USART3 Alternate Function mapping */
+
+/* AF 5 */
+#define GPIO_AF5_TIM15 ((uint8_t)0x05) /*!< AF5: TIM15 Alternate Function mapping */
+#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< AF5: TIM16 Alternate Function mapping */
+#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< AF5: TIM17 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< AF5: SPI2 Alternate Function mapping */
+#define GPIO_AF5_I2C2 ((uint8_t)0x05) /*!< AF5: I2C2 Alternate Function mapping */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT ((uint8_t)0x06) /*!< AF6: EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x06)
+
+#endif /* STM32F070xB */
+
+#if defined (STM32F042x6) || defined (STM32F048xx)
+/*--------------------------- STM32F042x6/STM32F048xx ---------------------------*/
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< AF0: EVENTOUT Alternate Function mapping */
+#define GPIO_AF0_CEC ((uint8_t)0x00) /*!< AF0: CEC Alternate Function mapping */
+#define GPIO_AF0_CRS ((uint8_t)0x00) /*!< AF0: CRS Alternate Function mapping */
+#define GPIO_AF0_IR ((uint8_t)0x00) /*!< AF0: IR Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< AF0: MCO Alternate Function mapping */
+#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< AF0: SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< AF0: SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF0_SWDIO ((uint8_t)0x00) /*!< AF0: SWDIO Alternate Function mapping */
+#define GPIO_AF0_SWCLK ((uint8_t)0x00) /*!< AF0: SWCLK Alternate Function mapping */
+#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< AF0: TIM14 Alternate Function mapping */
+#define GPIO_AF0_TIM17 ((uint8_t)0x00) /*!< AF0: TIM17 Alternate Function mapping */
+#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< AF0: USART1 Alternate Function mapping */
+
+/* AF 1 */
+#define GPIO_AF1_CEC ((uint8_t)0x01) /*!< AF1: CEC Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /*!< AF1: EVENTOUT Alternate Function mapping */
+#define GPIO_AF1_I2C1 ((uint8_t)0x01) /*!< AF1: I2C1 Alternate Function mapping */
+#define GPIO_AF1_IR ((uint8_t)0x01) /*!< AF1: IR Alternate Function mapping */
+#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< AF1: USART1 Alternate Function mapping */
+#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< AF1: USART2 Alternate Function mapping */
+#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< AF1: TIM3 Alternate Function mapping */
+
+/* AF 2 */
+#define GPIO_AF2_EVENTOUT ((uint8_t)0x02) /*!< AF2: EVENTOUT Alternate Function mapping */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< AF2: TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM2 ((uint8_t)0x02) /*!< AF2: TIM2 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< AF2: TIM16 Alternate Function mapping */
+#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< AF2: TIM17 Alternate Function mapping */
+#define GPIO_AF2_USB ((uint8_t)0x02) /*!< AF2: USB Alternate Function mapping */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT ((uint8_t)0x03) /*!< AF3: EVENTOUT Alternate Function mapping */
+#define GPIO_AF3_I2C1 ((uint8_t)0x03) /*!< AF3: I2C1 Alternate Function mapping */
+#define GPIO_AF3_TSC ((uint8_t)0x03) /*!< AF3: TSC Alternate Function mapping */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< AF4: TIM14 Alternate Function mapping */
+#define GPIO_AF4_CAN ((uint8_t)0x04) /*!< AF4: CAN Alternate Function mapping */
+#define GPIO_AF4_CRS ((uint8_t)0x04) /*!< AF4: CRS Alternate Function mapping */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /*!< AF4: I2C1 Alternate Function mapping */
+
+/* AF 5 */
+#define GPIO_AF5_MCO ((uint8_t)0x05) /*!< AF5: MCO Alternate Function mapping */
+#define GPIO_AF5_I2C1 ((uint8_t)0x05) /*!< AF5: I2C1 Alternate Function mapping */
+#define GPIO_AF5_I2C2 ((uint8_t)0x05) /*!< AF5: I2C2 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< AF5: SPI2 Alternate Function mapping */
+#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< AF5: TIM16 Alternate Function mapping */
+#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< AF5: TIM17 Alternate Function mapping */
+#define GPIO_AF5_USB ((uint8_t)0x05) /*!< AF5: USB Alternate Function mapping */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT ((uint8_t)0x06) /*!< AF6: EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x06)
+
+#endif /* STM32F042x6 || STM32F048xx */
+
+#if defined (STM32F070x6)
+/*--------------------------------------- STM32F070x6 ----------------------------------------*/
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< AF0: EVENTOUT Alternate Function mapping */
+#define GPIO_AF0_IR ((uint8_t)0x00) /*!< AF0: IR Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< AF0: MCO Alternate Function mapping */
+#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< AF0: SPI1 Alternate Function mapping */
+#define GPIO_AF0_SWDIO ((uint8_t)0x00) /*!< AF0: SWDIO Alternate Function mapping */
+#define GPIO_AF0_SWCLK ((uint8_t)0x00) /*!< AF0: SWCLK Alternate Function mapping */
+#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< AF0: TIM14 Alternate Function mapping */
+#define GPIO_AF0_TIM17 ((uint8_t)0x00) /*!< AF0: TIM17 Alternate Function mapping */
+#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< AF0: USART1 Alternate Function mapping */
+
+/* AF 1 */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /*!< AF1: EVENTOUT Alternate Function mapping */
+#define GPIO_AF1_I2C1 ((uint8_t)0x01) /*!< AF1: I2C1 Alternate Function mapping */
+#define GPIO_AF1_IR ((uint8_t)0x01) /*!< AF1: IR Alternate Function mapping */
+#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< AF1: USART1 Alternate Function mapping */
+#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< AF1: USART2 Alternate Function mapping */
+#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< AF1: TIM3 Alternate Function mapping */
+
+/* AF 2 */
+#define GPIO_AF2_EVENTOUT ((uint8_t)0x02) /*!< AF2: EVENTOUT Alternate Function mapping */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< AF2: TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< AF2: TIM16 Alternate Function mapping */
+#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< AF2: TIM17 Alternate Function mapping */
+#define GPIO_AF2_USB ((uint8_t)0x02) /*!< AF2: USB Alternate Function mapping */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT ((uint8_t)0x03) /*!< AF3: EVENTOUT Alternate Function mapping */
+#define GPIO_AF3_I2C1 ((uint8_t)0x03) /*!< AF3: I2C1 Alternate Function mapping */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< AF4: TIM14 Alternate Function mapping */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /*!< AF4: I2C1 Alternate Function mapping */
+
+/* AF 5 */
+#define GPIO_AF5_MCO ((uint8_t)0x05) /*!< AF5: MCO Alternate Function mapping */
+#define GPIO_AF5_I2C1 ((uint8_t)0x05) /*!< AF5: I2C1 Alternate Function mapping */
+#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< AF5: TIM16 Alternate Function mapping */
+#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< AF5: TIM17 Alternate Function mapping */
+#define GPIO_AF5_USB ((uint8_t)0x05) /*!< AF5: USB Alternate Function mapping */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT ((uint8_t)0x06) /*!< AF6: EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x06)
+
+#endif /* STM32F070x6 */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup GPIOEx_Exported_Macros GPIOEx Exported Macros
+ * @{
+ */
+
+/** @defgroup GPIOEx_Get_Port_Index GPIOEx_Get Port Index
+* @{
+ */
+#if defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+ defined (STM32F091xC) || defined (STM32F098xx)
+#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\
+ ((__GPIOx__) == (GPIOB))? 1U :\
+ ((__GPIOx__) == (GPIOC))? 2U :\
+ ((__GPIOx__) == (GPIOD))? 3U :\
+ ((__GPIOx__) == (GPIOE))? 4U : 5U)
+#endif
+
+#if defined (STM32F030x6) || defined (STM32F030x8) || defined (STM32F070xB) || defined (STM32F030xC) || \
+ defined (STM32F051x8) || defined (STM32F058xx)
+#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\
+ ((__GPIOx__) == (GPIOB))? 1U :\
+ ((__GPIOx__) == (GPIOC))? 2U :\
+ ((__GPIOx__) == (GPIOD))? 3U : 5U)
+#endif
+
+#if defined (STM32F031x6) || defined (STM32F038xx) || \
+ defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6)
+#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\
+ ((__GPIOx__) == (GPIOB))? 1U :\
+ ((__GPIOx__) == (GPIOC))? 2U : 5U)
+#endif
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_GPIO_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
+
diff --git a/f0/include/stm32f0xx_hal_i2c.h b/f0/include/stm32f0xx_hal_i2c.h
new file mode 100755
index 0000000000000000000000000000000000000000..d6963aa17116a68c5b3f02bc035c82461a4b1044
--- /dev/null
+++ b/f0/include/stm32f0xx_hal_i2c.h
@@ -0,0 +1,562 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_i2c.h
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief Header file of I2C HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_I2C_H
+#define __STM32F0xx_HAL_I2C_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup I2C
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup I2C_Exported_Types I2C Exported Types
+ * @{
+ */
+
+/** @defgroup I2C_Configuration_Structure_definition I2C Configuration Structure definition
+ * @brief I2C Configuration Structure definition
+ * @{
+ */
+typedef struct
+{
+ uint32_t Timing; /*!< Specifies the I2C_TIMINGR_register value.
+ This parameter calculated by referring to I2C initialization
+ section in Reference manual */
+
+ uint32_t OwnAddress1; /*!< Specifies the first device own address.
+ This parameter can be a 7-bit or 10-bit address. */
+
+ uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected.
+ This parameter can be a value of @ref I2C_addressing_mode */
+
+ uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected.
+ This parameter can be a value of @ref I2C_dual_addressing_mode */
+
+ uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected
+ This parameter can be a 7-bit address. */
+
+ uint32_t OwnAddress2Masks; /*!< Specifies the acknoledge mask address second device own address if dual addressing mode is selected
+ This parameter can be a value of @ref I2C_own_address2_masks. */
+
+ uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected.
+ This parameter can be a value of @ref I2C_general_call_addressing_mode. */
+
+ uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected.
+ This parameter can be a value of @ref I2C_nostretch_mode */
+
+}I2C_InitTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_state_structure_definition HAL state structure definition
+ * @brief HAL State structure definition
+ * @{
+ */
+
+typedef enum
+{
+ HAL_I2C_STATE_RESET = 0x00, /*!< I2C not yet initialized or disabled */
+ HAL_I2C_STATE_READY = 0x01, /*!< I2C initialized and ready for use */
+ HAL_I2C_STATE_BUSY = 0x02, /*!< I2C internal process is ongoing */
+ HAL_I2C_STATE_MASTER_BUSY_TX = 0x12, /*!< Master Data Transmission process is ongoing */
+ HAL_I2C_STATE_MASTER_BUSY_RX = 0x22, /*!< Master Data Reception process is ongoing */
+ HAL_I2C_STATE_SLAVE_BUSY_TX = 0x32, /*!< Slave Data Transmission process is ongoing */
+ HAL_I2C_STATE_SLAVE_BUSY_RX = 0x42, /*!< Slave Data Reception process is ongoing */
+ HAL_I2C_STATE_MEM_BUSY_TX = 0x52, /*!< Memory Data Transmission process is ongoing */
+ HAL_I2C_STATE_MEM_BUSY_RX = 0x62, /*!< Memory Data Reception process is ongoing */
+ HAL_I2C_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_I2C_STATE_ERROR = 0x04 /*!< Reception process is ongoing */
+
+}HAL_I2C_StateTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_handle_Structure_definition I2C handle Structure definition
+ * @brief I2C handle Structure definition
+ * @{
+ */
+
+typedef struct
+{
+ I2C_TypeDef *Instance; /*!< I2C registers base address */
+
+ I2C_InitTypeDef Init; /*!< I2C communication parameters */
+
+ uint8_t *pBuffPtr; /*!< Pointer to I2C transfer buffer */
+
+ uint16_t XferSize; /*!< I2C transfer size */
+
+ __IO uint16_t XferCount; /*!< I2C transfer counter */
+
+ DMA_HandleTypeDef *hdmatx; /*!< I2C Tx DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< I2C Rx DMA handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< I2C locking object */
+
+ __IO HAL_I2C_StateTypeDef State; /*!< I2C communication state */
+
+ __IO uint32_t ErrorCode; /*!< I2C Error code
+ This parameter can be a value of @ref I2C_Error */
+
+}I2C_HandleTypeDef;
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup I2C_Exported_Constants I2C Exported Constants
+ * @{
+ */
+
+/** @defgroup I2C_Error I2C Error
+ * @brief I2C Error
+ * @{
+ */
+
+#define HAL_I2C_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_I2C_ERROR_BERR ((uint32_t)0x00000001) /*!< BERR error */
+#define HAL_I2C_ERROR_ARLO ((uint32_t)0x00000002) /*!< ARLO error */
+#define HAL_I2C_ERROR_AF ((uint32_t)0x00000004) /*!< AF error */
+#define HAL_I2C_ERROR_OVR ((uint32_t)0x00000008) /*!< OVR error */
+#define HAL_I2C_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */
+#define HAL_I2C_ERROR_TIMEOUT ((uint32_t)0x00000020) /*!< Timeout error */
+#define HAL_I2C_ERROR_SIZE ((uint32_t)0x00000040) /*!< Size Management error */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup I2C_addressing_mode I2C addressing mode
+ * @{
+ */
+#define I2C_ADDRESSINGMODE_7BIT ((uint32_t)0x00000001)
+#define I2C_ADDRESSINGMODE_10BIT ((uint32_t)0x00000002)
+
+#define IS_I2C_ADDRESSING_MODE(MODE) (((MODE) == I2C_ADDRESSINGMODE_7BIT) || \
+ ((MODE) == I2C_ADDRESSINGMODE_10BIT))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_dual_addressing_mode I2C dual addressing mode
+ * @{
+ */
+
+#define I2C_DUALADDRESS_DISABLED ((uint32_t)0x00000000)
+#define I2C_DUALADDRESS_ENABLED I2C_OAR2_OA2EN
+
+#define IS_I2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == I2C_DUALADDRESS_DISABLED) || \
+ ((ADDRESS) == I2C_DUALADDRESS_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_own_address2_masks I2C own address2 masks
+ * @{
+ */
+
+#define I2C_OA2_NOMASK ((uint8_t)0x00)
+#define I2C_OA2_MASK01 ((uint8_t)0x01)
+#define I2C_OA2_MASK02 ((uint8_t)0x02)
+#define I2C_OA2_MASK03 ((uint8_t)0x03)
+#define I2C_OA2_MASK04 ((uint8_t)0x04)
+#define I2C_OA2_MASK05 ((uint8_t)0x05)
+#define I2C_OA2_MASK06 ((uint8_t)0x06)
+#define I2C_OA2_MASK07 ((uint8_t)0x07)
+
+#define IS_I2C_OWN_ADDRESS2_MASK(MASK) (((MASK) == I2C_OA2_NOMASK) || \
+ ((MASK) == I2C_OA2_MASK01) || \
+ ((MASK) == I2C_OA2_MASK02) || \
+ ((MASK) == I2C_OA2_MASK03) || \
+ ((MASK) == I2C_OA2_MASK04) || \
+ ((MASK) == I2C_OA2_MASK05) || \
+ ((MASK) == I2C_OA2_MASK06) || \
+ ((MASK) == I2C_OA2_MASK07))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_general_call_addressing_mode I2C general call addressing mode
+ * @{
+ */
+#define I2C_GENERALCALL_DISABLED ((uint32_t)0x00000000)
+#define I2C_GENERALCALL_ENABLED I2C_CR1_GCEN
+
+#define IS_I2C_GENERAL_CALL(CALL) (((CALL) == I2C_GENERALCALL_DISABLED) || \
+ ((CALL) == I2C_GENERALCALL_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_nostretch_mode I2C nostretch mode
+ * @{
+ */
+#define I2C_NOSTRETCH_DISABLED ((uint32_t)0x00000000)
+#define I2C_NOSTRETCH_ENABLED I2C_CR1_NOSTRETCH
+
+#define IS_I2C_NO_STRETCH(STRETCH) (((STRETCH) == I2C_NOSTRETCH_DISABLED) || \
+ ((STRETCH) == I2C_NOSTRETCH_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Memory_Address_Size I2C Memory Address Size
+ * @{
+ */
+#define I2C_MEMADD_SIZE_8BIT ((uint32_t)0x00000001)
+#define I2C_MEMADD_SIZE_16BIT ((uint32_t)0x00000002)
+
+#define IS_I2C_MEMADD_SIZE(SIZE) (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \
+ ((SIZE) == I2C_MEMADD_SIZE_16BIT))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_ReloadEndMode_definition I2C ReloadEndMode definition
+ * @{
+ */
+
+#define I2C_RELOAD_MODE I2C_CR2_RELOAD
+#define I2C_AUTOEND_MODE I2C_CR2_AUTOEND
+#define I2C_SOFTEND_MODE ((uint32_t)0x00000000)
+
+#define IS_TRANSFER_MODE(MODE) (((MODE) == I2C_RELOAD_MODE) || \
+ ((MODE) == I2C_AUTOEND_MODE) || \
+ ((MODE) == I2C_SOFTEND_MODE))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_StartStopMode_definition I2C StartStopMode definition
+ * @{
+ */
+
+#define I2C_NO_STARTSTOP ((uint32_t)0x00000000)
+#define I2C_GENERATE_STOP I2C_CR2_STOP
+#define I2C_GENERATE_START_READ (uint32_t)(I2C_CR2_START | I2C_CR2_RD_WRN)
+#define I2C_GENERATE_START_WRITE I2C_CR2_START
+
+#define IS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == I2C_GENERATE_STOP) || \
+ ((REQUEST) == I2C_GENERATE_START_READ) || \
+ ((REQUEST) == I2C_GENERATE_START_WRITE) || \
+ ((REQUEST) == I2C_NO_STARTSTOP))
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Interrupt_configuration_definition I2C Interrupt configuration definition
+ * @brief I2C Interrupt definition
+ * Elements values convention: 0xXXXXXXXX
+ * - XXXXXXXX : Interrupt control mask
+ * @{
+ */
+#define I2C_IT_ERRI I2C_CR1_ERRIE
+#define I2C_IT_TCI I2C_CR1_TCIE
+#define I2C_IT_STOPI I2C_CR1_STOPIE
+#define I2C_IT_NACKI I2C_CR1_NACKIE
+#define I2C_IT_ADDRI I2C_CR1_ADDRIE
+#define I2C_IT_RXI I2C_CR1_RXIE
+#define I2C_IT_TXI I2C_CR1_TXIE
+
+/**
+ * @}
+ */
+
+
+/** @defgroup I2C_Flag_definition I2C Flag definition
+ * @{
+ */
+
+#define I2C_FLAG_TXE I2C_ISR_TXE
+#define I2C_FLAG_TXIS I2C_ISR_TXIS
+#define I2C_FLAG_RXNE I2C_ISR_RXNE
+#define I2C_FLAG_ADDR I2C_ISR_ADDR
+#define I2C_FLAG_AF I2C_ISR_NACKF
+#define I2C_FLAG_STOPF I2C_ISR_STOPF
+#define I2C_FLAG_TC I2C_ISR_TC
+#define I2C_FLAG_TCR I2C_ISR_TCR
+#define I2C_FLAG_BERR I2C_ISR_BERR
+#define I2C_FLAG_ARLO I2C_ISR_ARLO
+#define I2C_FLAG_OVR I2C_ISR_OVR
+#define I2C_FLAG_PECERR I2C_ISR_PECERR
+#define I2C_FLAG_TIMEOUT I2C_ISR_TIMEOUT
+#define I2C_FLAG_ALERT I2C_ISR_ALERT
+#define I2C_FLAG_BUSY I2C_ISR_BUSY
+#define I2C_FLAG_DIR I2C_ISR_DIR
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @defgroup I2C_Exported_Macros I2C Exported Macros
+ * @{
+ */
+
+/** @brief Reset I2C handle state
+ * @param __HANDLE__: I2C handle.
+ * @retval None
+ */
+#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2C_STATE_RESET)
+
+/** @brief Enables or disables the specified I2C interrupts.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2Cx where x: 1 or 2 to select the I2C peripheral.
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg I2C_IT_ERRI: Errors interrupt enable
+ * @arg I2C_IT_TCI: Transfer complete interrupt enable
+ * @arg I2C_IT_STOPI: STOP detection interrupt enable
+ * @arg I2C_IT_NACKI: NACK received interrupt enable
+ * @arg I2C_IT_ADDRI: Address match interrupt enable
+ * @arg I2C_IT_RXI: RX interrupt enable
+ * @arg I2C_IT_TXI: TX interrupt enable
+ *
+ * @retval None
+ */
+
+#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__))
+#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__)))
+
+/** @brief Checks if the specified I2C interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2Cx where x: 1 or 2 to select the I2C peripheral.
+ * @param __INTERRUPT__: specifies the I2C interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg I2C_IT_ERRI: Errors interrupt enable
+ * @arg I2C_IT_TCI: Transfer complete interrupt enable
+ * @arg I2C_IT_STOPI: STOP detection interrupt enable
+ * @arg I2C_IT_NACKI: NACK received interrupt enable
+ * @arg I2C_IT_ADDRI: Address match interrupt enable
+ * @arg I2C_IT_RXI: RX interrupt enable
+ * @arg I2C_IT_TXI: TX interrupt enable
+ *
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Checks whether the specified I2C flag is set or not.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2Cx where x: 1 or 2 to select the I2C peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg I2C_FLAG_TXE: Transmit data register empty
+ * @arg I2C_FLAG_TXIS: Transmit interrupt status
+ * @arg I2C_FLAG_RXNE: Receive data register not empty
+ * @arg I2C_FLAG_ADDR: Address matched (slave mode)
+ * @arg I2C_FLAG_AF: Acknowledge failure received flag
+ * @arg I2C_FLAG_STOPF: STOP detection flag
+ * @arg I2C_FLAG_TC: Transfer complete (master mode)
+ * @arg I2C_FLAG_TCR: Transfer complete reload
+ * @arg I2C_FLAG_BERR: Bus error
+ * @arg I2C_FLAG_ARLO: Arbitration lost
+ * @arg I2C_FLAG_OVR: Overrun/Underrun
+ * @arg I2C_FLAG_PECERR: PEC error in reception
+ * @arg I2C_FLAG_TIMEOUT: Timeout or Tlow detection flag
+ * @arg I2C_FLAG_ALERT: SMBus alert
+ * @arg I2C_FLAG_BUSY: Bus busy
+ * @arg I2C_FLAG_DIR: Transfer direction (slave mode)
+ *
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->ISR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the I2C pending flags which are cleared by writing 1 in a specific bit.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2Cx where x: 1 or 2 to select the I2C peripheral.
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg I2C_FLAG_ADDR: Address matched (slave mode)
+ * @arg I2C_FLAG_AF: Acknowledge failure flag
+ * @arg I2C_FLAG_STOPF: STOP detection flag
+ * @arg I2C_FLAG_BERR: Bus error
+ * @arg I2C_FLAG_ARLO: Arbitration lost
+ * @arg I2C_FLAG_OVR: Overrun/Underrun
+ * @arg I2C_FLAG_PECERR: PEC error in reception
+ * @arg I2C_FLAG_TIMEOUT: Timeout or Tlow detection flag
+ * @arg I2C_FLAG_ALERT: SMBus alert
+ *
+ * @retval None
+ */
+#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
+
+
+#define __HAL_I2C_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= I2C_CR1_PE)
+#define __HAL_I2C_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~I2C_CR1_PE)
+
+#define __HAL_I2C_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_RD_WRN)))
+
+#define __HAL_I2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0xFF00))) >> 8)))
+#define __HAL_I2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FF))))
+
+#define __HAL_I2C_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == I2C_ADDRESSINGMODE_7BIT) ? (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & (~I2C_CR2_RD_WRN)) : \
+ (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_ADD10) | (I2C_CR2_START)) & (~I2C_CR2_RD_WRN)))
+
+#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= (uint32_t)0x000003FF)
+#define IS_I2C_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FF)
+/**
+ * @}
+ */
+
+/* Include I2C HAL Extended module */
+#include "stm32f0xx_hal_i2c_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup I2C_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c);
+HAL_StatusTypeDef HAL_I2C_DeInit (I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c);
+
+/**
+ * @}
+ */
+
+/** @addtogroup I2C_Exported_Functions_Group2 Input and Output operation functions
+ * @{
+ */
+
+/* IO operation functions *****************************************************/
+
+ /******* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout);
+
+ /******* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+
+ /******* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+
+ /******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */
+void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c);
+
+/**
+ * @}
+ */
+
+/** @addtogroup I2C_Exported_Functions_Group3 Peripheral State and Errors functions
+ * @{
+ */
+
+/* Peripheral State and Errors functions **************************************/
+HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c);
+uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F0xx_HAL_I2C_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/include/stm32f0xx_hal_i2c_ex.h b/f0/include/stm32f0xx_hal_i2c_ex.h
new file mode 100755
index 0000000000000000000000000000000000000000..2d55c89b5436ddd59b7f9e498db1553be9c7f681
--- /dev/null
+++ b/f0/include/stm32f0xx_hal_i2c_ex.h
@@ -0,0 +1,132 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_i2c_ex.h
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief Header file of I2C HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_I2C_EX_H
+#define __STM32F0xx_HAL_I2C_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup I2CEx I2CEx Extended HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup I2CEx_Exported_Constants I2CEx Exported Constants
+ * @{
+ */
+
+/** @defgroup I2CEx_Analog_Filter I2CEx Analog Filter
+ * @{
+ */
+#define I2C_ANALOGFILTER_ENABLED ((uint32_t)0x00000000)
+#define I2C_ANALOGFILTER_DISABLED I2C_CR1_ANFOFF
+
+#define IS_I2C_ANALOG_FILTER(FILTER) (((FILTER) == I2C_ANALOGFILTER_ENABLED) || \
+ ((FILTER) == I2C_ANALOGFILTER_DISABLED))
+/**
+ * @}
+ */
+
+/** @defgroup I2CEx_Digital_Filter I2CEx Digital Filter
+ * @{
+ */
+#define IS_I2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000F)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup I2CEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup I2CEx_Exported_Functions_Group1 Extended features functions
+ * @brief Extended features functions
+ * @{
+ */
+
+/* Peripheral Control functions ************************************************/
+HAL_StatusTypeDef HAL_I2CEx_AnalogFilter_Config(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter);
+HAL_StatusTypeDef HAL_I2CEx_DigitalFilter_Config(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter);
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp (I2C_HandleTypeDef *hi2c);
+HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp (I2C_HandleTypeDef *hi2c);
+#endif /* !(STM32F030x6) && !(STM32F030x8) && !(STM32F070x6) && !(STM32F070xB) && !(STM32F030xC) */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_I2C_EX_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/include/stm32f0xx_hal_i2s.h b/f0/include/stm32f0xx_hal_i2s.h
new file mode 100755
index 0000000000000000000000000000000000000000..0637f82926ce09202d888da87954f7bfd54d084f
--- /dev/null
+++ b/f0/include/stm32f0xx_hal_i2s.h
@@ -0,0 +1,453 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_i2s.h
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief Header file of I2S HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_I2S_H
+#define __STM32F0xx_HAL_I2S_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F031x6) || defined(STM32F038xx) || \
+ defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup I2S
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup I2S_Exported_Types I2S Exported Types
+ * @{
+ */
+
+/**
+ * @brief I2S Init structure definition
+ */
+typedef struct
+{
+ uint32_t Mode; /*!< Specifies the I2S operating mode.
+ This parameter can be a value of @ref I2S_Mode */
+
+ uint32_t Standard; /*!< Specifies the standard used for the I2S communication.
+ This parameter can be a value of @ref I2S_Standard */
+
+ uint32_t DataFormat; /*!< Specifies the data format for the I2S communication.
+ This parameter can be a value of @ref I2S_Data_Format */
+
+ uint32_t MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not.
+ This parameter can be a value of @ref I2S_MCLK_Output */
+
+ uint32_t AudioFreq; /*!< Specifies the frequency selected for the I2S communication.
+ This parameter can be a value of @ref I2S_Audio_Frequency */
+
+ uint32_t CPOL; /*!< Specifies the idle state of the I2S clock.
+ This parameter can be a value of @ref I2S_Clock_Polarity */
+}I2S_InitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_I2S_STATE_RESET = 0x00, /*!< I2S not yet initialized or disabled */
+ HAL_I2S_STATE_READY = 0x01, /*!< I2S initialized and ready for use */
+ HAL_I2S_STATE_BUSY = 0x02, /*!< I2S internal process is ongoing */
+ HAL_I2S_STATE_BUSY_TX = 0x03, /*!< Data Transmission process is ongoing */
+ HAL_I2S_STATE_BUSY_RX = 0x04, /*!< Data Reception process is ongoing */
+ HAL_I2S_STATE_PAUSE = 0x06, /*!< I2S pause state: used in case of DMA */
+ HAL_I2S_STATE_ERROR = 0x07 /*!< I2S error state */
+}HAL_I2S_StateTypeDef;
+
+/**
+ * @brief I2S handle Structure definition
+ */
+typedef struct
+{
+ SPI_TypeDef *Instance; /*!< I2S registers base address */
+
+ I2S_InitTypeDef Init; /*!< I2S communication parameters */
+
+ uint16_t *pTxBuffPtr; /*!< Pointer to I2S Tx transfer buffer */
+
+ __IO uint16_t TxXferSize; /*!< I2S Tx transfer size */
+
+ __IO uint16_t TxXferCount; /*!< I2S Tx transfer Counter */
+
+ uint16_t *pRxBuffPtr; /*!< Pointer to I2S Rx transfer buffer */
+
+ __IO uint16_t RxXferSize; /*!< I2S Rx transfer size */
+
+ __IO uint16_t RxXferCount; /*!< I2S Rx transfer counter
+ (This field is initialized at the
+ same value as transfer size at the
+ beginning of the transfer and
+ decremented when a sample is received.
+ NbSamplesReceived = RxBufferSize-RxBufferCount) */
+
+ DMA_HandleTypeDef *hdmatx; /*!< I2S Tx DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< I2S Rx DMA handle parameters */
+
+ __IO HAL_LockTypeDef Lock; /*!< I2S locking object */
+
+ __IO HAL_I2S_StateTypeDef State; /*!< I2S communication state */
+
+ __IO uint32_t ErrorCode; /*!< I2S Error code
+ This parameter can be a value of @ref I2S_Error */
+
+}I2S_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup I2S_Exported_Constants I2S Exported Constants
+ * @{
+ */
+/** @defgroup I2S_Error I2S Error
+ * @{
+ */
+#define HAL_I2S_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_I2S_ERROR_TIMEOUT ((uint32_t)0x00000001) /*!< Timeout error */
+#define HAL_I2S_ERROR_OVR ((uint32_t)0x00000002) /*!< OVR error */
+#define HAL_I2S_ERROR_UDR ((uint32_t)0x00000004) /*!< UDR error */
+#define HAL_I2S_ERROR_DMA ((uint32_t)0x00000008) /*!< DMA transfer error */
+#define HAL_I2S_ERROR_UNKNOW ((uint32_t)0x00000010) /*!< Unknow Error error */
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Mode I2S Mode
+ * @{
+ */
+#define I2S_MODE_SLAVE_TX ((uint32_t)0x00000000)
+#define I2S_MODE_SLAVE_RX ((uint32_t)0x00000100)
+#define I2S_MODE_MASTER_TX ((uint32_t)0x00000200)
+#define I2S_MODE_MASTER_RX ((uint32_t)0x00000300)
+
+#define IS_I2S_MODE(MODE) (((MODE) == I2S_MODE_SLAVE_TX) || \
+ ((MODE) == I2S_MODE_SLAVE_RX) || \
+ ((MODE) == I2S_MODE_MASTER_TX)|| \
+ ((MODE) == I2S_MODE_MASTER_RX))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Standard I2S Standard
+ * @{
+ */
+#define I2S_STANDARD_PHILIPS ((uint32_t)0x00000000)
+#define I2S_STANDARD_MSB ((uint32_t)0x00000010)
+#define I2S_STANDARD_LSB ((uint32_t)0x00000020)
+#define I2S_STANDARD_PCM_SHORT ((uint32_t)0x00000030)
+#define I2S_STANDARD_PCM_LONG ((uint32_t)0x000000B0)
+
+#define IS_I2S_STANDARD(STANDARD) (((STANDARD) == I2S_STANDARD_PHILIPS) || \
+ ((STANDARD) == I2S_STANDARD_MSB) || \
+ ((STANDARD) == I2S_STANDARD_LSB) || \
+ ((STANDARD) == I2S_STANDARD_PCM_SHORT) || \
+ ((STANDARD) == I2S_STANDARD_PCM_LONG))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Data_Format I2S Data Format
+ * @{
+ */
+#define I2S_DATAFORMAT_16B ((uint32_t)0x00000000)
+#define I2S_DATAFORMAT_16B_EXTENDED ((uint32_t)0x00000001)
+#define I2S_DATAFORMAT_24B ((uint32_t)0x00000003)
+#define I2S_DATAFORMAT_32B ((uint32_t)0x00000005)
+
+#define IS_I2S_DATA_FORMAT(FORMAT) (((FORMAT) == I2S_DATAFORMAT_16B) || \
+ ((FORMAT) == I2S_DATAFORMAT_16B_EXTENDED) || \
+ ((FORMAT) == I2S_DATAFORMAT_24B) || \
+ ((FORMAT) == I2S_DATAFORMAT_32B))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_MCLK_Output I2S MCLK Output
+ * @{
+ */
+#define I2S_MCLKOUTPUT_ENABLE ((uint32_t)SPI_I2SPR_MCKOE)
+#define I2S_MCLKOUTPUT_DISABLE ((uint32_t)0x00000000)
+
+#define IS_I2S_MCLK_OUTPUT(OUTPUT) (((OUTPUT) == I2S_MCLKOUTPUT_ENABLE) || \
+ ((OUTPUT) == I2S_MCLKOUTPUT_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Audio_Frequency I2S Audio Frequency
+ * @{
+ */
+#define I2S_AUDIOFREQ_192K ((uint32_t)192000)
+#define I2S_AUDIOFREQ_96K ((uint32_t)96000)
+#define I2S_AUDIOFREQ_48K ((uint32_t)48000)
+#define I2S_AUDIOFREQ_44K ((uint32_t)44100)
+#define I2S_AUDIOFREQ_32K ((uint32_t)32000)
+#define I2S_AUDIOFREQ_22K ((uint32_t)22050)
+#define I2S_AUDIOFREQ_16K ((uint32_t)16000)
+#define I2S_AUDIOFREQ_11K ((uint32_t)11025)
+#define I2S_AUDIOFREQ_8K ((uint32_t)8000)
+#define I2S_AUDIOFREQ_DEFAULT ((uint32_t)2)
+
+#define IS_I2S_AUDIO_FREQ(FREQ) ((((FREQ) >= I2S_AUDIOFREQ_8K) && \
+ ((FREQ) <= I2S_AUDIOFREQ_192K)) || \
+ ((FREQ) == I2S_AUDIOFREQ_DEFAULT))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Clock_Polarity I2S Clock Polarity
+ * @{
+ */
+#define I2S_CPOL_LOW ((uint32_t)0x00000000)
+#define I2S_CPOL_HIGH ((uint32_t)SPI_I2SCFGR_CKPOL)
+
+#define IS_I2S_CPOL(CPOL) (((CPOL) == I2S_CPOL_LOW) || \
+ ((CPOL) == I2S_CPOL_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Interrupt_configuration_definition I2S Interrupt configuration definition
+ * @{
+ */
+#define I2S_IT_TXE SPI_CR2_TXEIE
+#define I2S_IT_RXNE SPI_CR2_RXNEIE
+#define I2S_IT_ERR SPI_CR2_ERRIE
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Flag_definition I2S Flag definition
+ * @{
+ */
+#define I2S_FLAG_TXE SPI_SR_TXE
+#define I2S_FLAG_RXNE SPI_SR_RXNE
+
+#define I2S_FLAG_UDR SPI_SR_UDR
+#define I2S_FLAG_OVR SPI_SR_OVR
+#define I2S_FLAG_FRE SPI_SR_FRE
+
+#define I2S_FLAG_CHSIDE SPI_SR_CHSIDE
+#define I2S_FLAG_BSY SPI_SR_BSY
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup I2S_Exported_macros I2S Exported Macros
+ * @{
+ */
+
+/** @brief Reset I2S handle state
+ * @param __HANDLE__: I2S handle.
+ * @retval None
+ */
+#define __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2S_STATE_RESET)
+
+/** @brief Enable or disable the specified SPI peripheral (in I2S mode).
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2S_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->I2SCFGR |= SPI_I2SCFGR_I2SE)
+#define __HAL_I2S_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->I2SCFGR &= (uint16_t)(~SPI_I2SCFGR_I2SE))
+
+/** @brief Enable or disable the specified I2S interrupts.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg I2S_IT_TXE: Tx buffer empty interrupt enable
+ * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg I2S_IT_ERR: Error interrupt enable
+ * @retval None
+ */
+#define __HAL_I2S_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 |= (__INTERRUPT__))
+#define __HAL_I2S_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 &= (uint16_t)(~(__INTERRUPT__)))
+
+/** @brief Checks if the specified I2S interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * This parameter can be I2S where x: 1, 2, or 3 to select the I2S peripheral.
+ * @param __INTERRUPT__: specifies the I2S interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg I2S_IT_TXE: Tx buffer empty interrupt enable
+ * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg I2S_IT_ERR: Error interrupt enable
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_I2S_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Checks whether the specified I2S flag is set or not.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg I2S_FLAG_RXNE: Receive buffer not empty flag
+ * @arg I2S_FLAG_TXE: Transmit buffer empty flag
+ * @arg I2S_FLAG_UDR: Underrun flag
+ * @arg I2S_FLAG_OVR: Overrun flag
+ * @arg I2S_FLAG_FRE: Frame error flag
+ * @arg I2S_FLAG_CHSIDE: Channel Side flag
+ * @arg I2S_FLAG_BSY: Busy flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_I2S_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the I2S OVR pending flag.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2S_CLEAR_OVRFLAG(__HANDLE__) do{ \
+ __IO uint32_t tmpreg; \
+ tmpreg = (__HANDLE__)->Instance->DR; \
+ tmpreg = (__HANDLE__)->Instance->SR; \
+ UNUSED(tmpreg); \
+ }while(0)
+/** @brief Clears the I2S UDR pending flag.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2S_CLEAR_UDRFLAG(__HANDLE__) do{\
+ __IO uint32_t tmpreg;\
+ tmpreg = ((__HANDLE__)->Instance->SR);\
+ UNUSED(tmpreg); \
+ }while(0)
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup I2S_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup I2S_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef HAL_I2S_DeInit (I2S_HandleTypeDef *hi2s);
+void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s);
+/**
+ * @}
+ */
+
+/** @addtogroup I2S_Exported_Functions_Group2
+ * @{
+ */
+/* I/O operation functions ***************************************************/
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout);
+
+ /* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+
+HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s);
+
+/* Callbacks used in non blocking modes (Interrupt and DMA) *******************/
+void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s);
+/**
+ * @}
+ */
+
+/** @addtogroup I2S_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral Control and State functions ************************************/
+HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s);
+uint32_t HAL_I2S_GetError(I2S_HandleTypeDef *hi2s);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* defined(STM32F031x6) || defined(STM32F038xx) || */
+ /* defined(STM32F051x8) || defined(STM32F058xx) || */
+ /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) ||*/
+ /* defined(STM32F042x6) || defined(STM32F048xx) || */
+ /* defined(STM32F091xC) || defined(STM32F098xx) */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F0xx_HAL_I2S_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/include/stm32f0xx_hal_irda.h b/f0/include/stm32f0xx_hal_irda.h
new file mode 100755
index 0000000000000000000000000000000000000000..12477f89423baeedfbbfc958f60da711af6c7093
--- /dev/null
+++ b/f0/include/stm32f0xx_hal_irda.h
@@ -0,0 +1,631 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_irda.h
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief This file contains all the functions prototypes for the IRDA
+ * firmware library.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_IRDA_H
+#define __STM32F0xx_HAL_IRDA_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup IRDA
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup IRDA_Exported_Types IRDA Exported Types
+ * @{
+ */
+
+/**
+ * @brief IRDA Init Structure definition
+ */
+typedef struct
+{
+ uint32_t BaudRate; /*!< This member configures the IRDA communication baud rate.
+ The baud rate register is computed using the following formula:
+ Baud Rate Register = ((PCLKx) / ((hirda->Init.BaudRate))) */
+
+ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter can be a value of @ref IRDAEx_Word_Length */
+
+ uint16_t Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref IRDA_Parity
+ @note When parity is enabled, the computed parity is inserted
+ at the MSB position of the transmitted data (9th bit when
+ the word length is set to 9 data bits; 8th bit when the
+ word length is set to 8 data bits). */
+
+ uint16_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref IRDA_Mode */
+
+ uint8_t Prescaler; /*!< Specifies the Prescaler value for dividing the UART/USART source clock
+ to achieve low-power frequency.
+ @note Prescaler value 0 is forbidden */
+
+ uint16_t PowerMode; /*!< Specifies the IRDA power mode.
+ This parameter can be a value of @ref IRDA_Low_Power */
+}IRDA_InitTypeDef;
+
+/**
+ * @brief HAL IRDA State structures definition
+ */
+typedef enum
+{
+ HAL_IRDA_STATE_RESET = 0x00, /*!< Peripheral is not initialized */
+ HAL_IRDA_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_IRDA_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_IRDA_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
+ HAL_IRDA_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
+ HAL_IRDA_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */
+ HAL_IRDA_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_IRDA_STATE_ERROR = 0x04 /*!< Error */
+}HAL_IRDA_StateTypeDef;
+
+/**
+ * @brief IRDA clock sources definition
+ */
+typedef enum
+{
+ IRDA_CLOCKSOURCE_PCLK1 = 0x00, /*!< PCLK1 clock source */
+ IRDA_CLOCKSOURCE_HSI = 0x02, /*!< HSI clock source */
+ IRDA_CLOCKSOURCE_SYSCLK = 0x04, /*!< SYSCLK clock source */
+ IRDA_CLOCKSOURCE_LSE = 0x08, /*!< LSE clock source */
+ IRDA_CLOCKSOURCE_UNDEFINED = 0x10 /*!< undefined clock source */
+}IRDA_ClockSourceTypeDef;
+
+/**
+ * @brief IRDA handle Structure definition
+ */
+typedef struct
+{
+ USART_TypeDef *Instance; /*!< USART registers base address */
+
+ IRDA_InitTypeDef Init; /*!< IRDA communication parameters */
+
+ uint8_t *pTxBuffPtr; /*!< Pointer to IRDA Tx transfer Buffer */
+
+ uint16_t TxXferSize; /*!< IRDA Tx Transfer size */
+
+ uint16_t TxXferCount; /*!< IRDA Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /*!< Pointer to IRDA Rx transfer Buffer */
+
+ uint16_t RxXferSize; /*!< IRDA Rx Transfer size */
+
+ uint16_t RxXferCount; /*!< IRDA Rx Transfer Counter */
+
+ uint16_t Mask; /*!< USART RX RDR register mask */
+
+ DMA_HandleTypeDef *hdmatx; /*!< IRDA Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< IRDA Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< Locking object */
+
+ HAL_IRDA_StateTypeDef State; /*!< IRDA communication state */
+
+ __IO uint32_t ErrorCode; /*!< IRDA Error code
+ This parameter can be a value of @ref IRDA_Error */
+
+}IRDA_HandleTypeDef;
+
+/**
+ * @brief IRDA Configuration enumeration values definition
+ */
+typedef enum
+{
+ IRDA_BAUDRATE = 0x00,
+ IRDA_PARITY = 0x01,
+ IRDA_WORDLENGTH = 0x02,
+ IRDA_MODE = 0x03,
+ IRDA_PRESCALER = 0x04,
+ IRDA_POWERMODE = 0x05
+}IRDA_ControlTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup IRDA_Exported_Constants IRDA Exported constants
+ * @{
+ */
+
+/** @defgroup IRDA_Error IRDA Error
+ * @{
+ */
+#define HAL_IRDA_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_IRDA_ERROR_PE ((uint32_t)0x00000001) /*!< Parity error */
+#define HAL_IRDA_ERROR_NE ((uint32_t)0x00000002) /*!< Noise error */
+#define HAL_IRDA_ERROR_FE ((uint32_t)0x00000004) /*!< frame error */
+#define HAL_IRDA_ERROR_ORE ((uint32_t)0x00000008) /*!< Overrun error */
+#define HAL_IRDA_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Parity IRDA Parity
+ * @{
+ */
+#define IRDA_PARITY_NONE ((uint16_t)0x0000)
+#define IRDA_PARITY_EVEN ((uint16_t)USART_CR1_PCE)
+#define IRDA_PARITY_ODD ((uint16_t)(USART_CR1_PCE | USART_CR1_PS))
+#define IS_IRDA_PARITY(PARITY) (((PARITY) == IRDA_PARITY_NONE) || \
+ ((PARITY) == IRDA_PARITY_EVEN) || \
+ ((PARITY) == IRDA_PARITY_ODD))
+/**
+ * @}
+ */
+
+
+/** @defgroup IRDA_Transfer_Mode IRDA Transfer Mode
+ * @{
+ */
+#define IRDA_MODE_RX ((uint16_t)USART_CR1_RE)
+#define IRDA_MODE_TX ((uint16_t)USART_CR1_TE)
+#define IRDA_MODE_TX_RX ((uint16_t)(USART_CR1_TE |USART_CR1_RE))
+#define IS_IRDA_TX_RX_MODE(MODE) ((((MODE) & ((uint16_t)(~((uint16_t)(IRDA_MODE_TX_RX))))) == (uint16_t)0x00) && ((MODE) != (uint16_t)0x00))
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Low_Power IRDA Low Power
+ * @{
+ */
+#define IRDA_POWERMODE_NORMAL ((uint16_t)0x0000)
+#define IRDA_POWERMODE_LOWPOWER ((uint16_t)USART_CR3_IRLP)
+#define IS_IRDA_POWERMODE(MODE) (((MODE) == IRDA_POWERMODE_LOWPOWER) || \
+ ((MODE) == IRDA_POWERMODE_NORMAL))
+/**
+ * @}
+ */
+
+ /** @defgroup IRDA_State IRDA State
+ * @{
+ */
+#define IRDA_STATE_DISABLE ((uint16_t)0x0000)
+#define IRDA_STATE_ENABLE ((uint16_t)USART_CR1_UE)
+#define IS_IRDA_STATE(STATE) (((STATE) == IRDA_STATE_DISABLE) || \
+ ((STATE) == IRDA_STATE_ENABLE))
+/**
+ * @}
+ */
+
+ /** @defgroup IRDA_Mode IRDA Mode
+ * @{
+ */
+#define IRDA_MODE_DISABLE ((uint16_t)0x0000)
+#define IRDA_MODE_ENABLE ((uint16_t)USART_CR3_IREN)
+#define IS_IRDA_MODE(STATE) (((STATE) == IRDA_MODE_DISABLE) || \
+ ((STATE) == IRDA_MODE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_One_Bit IRDA One Bit Sampling
+ * @{
+ */
+#define IRDA_ONE_BIT_SAMPLE_DISABLED ((uint16_t)0x00000000)
+#define IRDA_ONE_BIT_SAMPLE_ENABLED ((uint16_t)USART_CR3_ONEBIT)
+#define IS_IRDA_ONEBIT_SAMPLE(ONEBIT) (((ONEBIT) == IRDA_ONE_BIT_SAMPLE_DISABLED) || \
+ ((ONEBIT) == IRDA_ONE_BIT_SAMPLE_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_DMA_Tx IRDA DMA Tx
+ * @{
+ */
+#define IRDA_DMA_TX_DISABLE ((uint16_t)0x00000000)
+#define IRDA_DMA_TX_ENABLE ((uint16_t)USART_CR3_DMAT)
+#define IS_IRDA_DMA_TX(DMATX) (((DMATX) == IRDA_DMA_TX_DISABLE) || \
+ ((DMATX) == IRDA_DMA_TX_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_DMA_Rx IRDA DMA Rx
+ * @{
+ */
+#define IRDA_DMA_RX_DISABLE ((uint16_t)0x0000)
+#define IRDA_DMA_RX_ENABLE ((uint16_t)USART_CR3_DMAR)
+#define IS_IRDA_DMA_RX(DMARX) (((DMARX) == IRDA_DMA_RX_DISABLE) || \
+ ((DMARX) == IRDA_DMA_RX_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Flags IRDA Flags
+ * Elements values convention: 0xXXXX
+ * - 0xXXXX : Flag mask in the ISR register
+ * @{
+ */
+#define IRDA_FLAG_REACK ((uint32_t)0x00400000)
+#define IRDA_FLAG_TEACK ((uint32_t)0x00200000)
+#define IRDA_FLAG_BUSY ((uint32_t)0x00010000)
+#define IRDA_FLAG_ABRF ((uint32_t)0x00008000)
+#define IRDA_FLAG_ABRE ((uint32_t)0x00004000)
+#define IRDA_FLAG_TXE ((uint32_t)0x00000080)
+#define IRDA_FLAG_TC ((uint32_t)0x00000040)
+#define IRDA_FLAG_RXNE ((uint32_t)0x00000020)
+#define IRDA_FLAG_ORE ((uint32_t)0x00000008)
+#define IRDA_FLAG_NE ((uint32_t)0x00000004)
+#define IRDA_FLAG_FE ((uint32_t)0x00000002)
+#define IRDA_FLAG_PE ((uint32_t)0x00000001)
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Interrupt_definition IRDA Interrupt Definition
+ * Elements values convention: 0000ZZZZ0XXYYYYYb
+ * - YYYYY : Interrupt source position in the XX register (5bits)
+ * - XX : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR2 register
+ * - 11: CR3 register
+ * - ZZZZ : Flag position in the ISR register(4bits)
+ * @{
+ */
+#define IRDA_IT_PE ((uint16_t)0x0028)
+#define IRDA_IT_TXE ((uint16_t)0x0727)
+#define IRDA_IT_TC ((uint16_t)0x0626)
+#define IRDA_IT_RXNE ((uint16_t)0x0525)
+#define IRDA_IT_IDLE ((uint16_t)0x0424)
+
+
+
+/** Elements values convention: 000000000XXYYYYYb
+ * - YYYYY : Interrupt source position in the XX register (5bits)
+ * - XX : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR2 register
+ * - 11: CR3 register
+ */
+#define IRDA_IT_ERR ((uint16_t)0x0060)
+
+/** Elements values convention: 0000ZZZZ00000000b
+ * - ZZZZ : Flag position in the ISR register(4bits)
+ */
+#define IRDA_IT_ORE ((uint16_t)0x0300)
+#define IRDA_IT_NE ((uint16_t)0x0200)
+#define IRDA_IT_FE ((uint16_t)0x0100)
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_IT_CLEAR_Flags IRDA Interruption Clear Flags
+ * @{
+ */
+#define IRDA_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */
+#define IRDA_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */
+#define IRDA_CLEAR_NEF USART_ICR_NCF /*!< Noise detected Clear Flag */
+#define IRDA_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */
+#define IRDA_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */
+/**
+ * @}
+ */
+
+
+
+/** @defgroup IRDA_Request_Parameters IRDA Request Parameters
+ * @{
+ */
+#define IRDA_AUTOBAUD_REQUEST ((uint16_t)USART_RQR_ABRRQ) /*!< Auto-Baud Rate Request */
+#define IRDA_RXDATA_FLUSH_REQUEST ((uint16_t)USART_RQR_RXFRQ) /*!< Receive Data flush Request */
+#define IRDA_TXDATA_FLUSH_REQUEST ((uint16_t)USART_RQR_TXFRQ) /*!< Transmit data flush Request */
+#define IS_IRDA_REQUEST_PARAMETER(PARAM) (((PARAM) == IRDA_AUTOBAUD_REQUEST) || \
+ ((PARAM) == IRDA_RXDATA_FLUSH_REQUEST) || \
+ ((PARAM) == IRDA_TXDATA_FLUSH_REQUEST))
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Interruption_Mask IRDA interruptions flag mask
+ * @{
+ */
+#define IRDA_IT_MASK ((uint16_t)0x001F)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup IRDA_Exported_Macros IRDA Exported Macros
+ * @{
+ */
+
+/** @brief Reset IRDA handle state
+ * @param __HANDLE__: IRDA handle.
+ * @retval None
+ */
+#define __HAL_IRDA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_IRDA_STATE_RESET)
+
+/** @brief Checks whether the specified IRDA flag is set or not.
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg IRDA_FLAG_REACK: Receive enable ackowledge flag
+ * @arg IRDA_FLAG_TEACK: Transmit enable ackowledge flag
+ * @arg IRDA_FLAG_BUSY: Busy flag
+ * @arg IRDA_FLAG_ABRF: Auto Baud rate detection flag
+ * @arg IRDA_FLAG_ABRE: Auto Baud rate detection error flag
+ * @arg IRDA_FLAG_TXE: Transmit data register empty flag
+ * @arg IRDA_FLAG_TC: Transmission Complete flag
+ * @arg IRDA_FLAG_RXNE: Receive data register not empty flag
+ * @arg IRDA_FLAG_IDLE: Idle Line detection flag
+ * @arg IRDA_FLAG_ORE: OverRun Error flag
+ * @arg IRDA_FLAG_NE: Noise Error flag
+ * @arg IRDA_FLAG_FE: Framing Error flag
+ * @arg IRDA_FLAG_PE: Parity Error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_IRDA_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Enables the specified IRDA interrupt.
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral
+ * @param __INTERRUPT__: specifies the IRDA interrupt source to enable.
+ * This parameter can be one of the following values:
+ * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt
+ * @arg IRDA_IT_TC: Transmission complete interrupt
+ * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt
+ * @arg IRDA_IT_IDLE: Idle line detection interrupt
+ * @arg IRDA_IT_PE: Parity Error interrupt
+ * @arg IRDA_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_IRDA_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 |= (1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \
+ ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 |= (1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 |= (1U << ((__INTERRUPT__) & IRDA_IT_MASK))))
+
+/** @brief Disables the specified IRDA interrupt.
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral
+ * @param __INTERRUPT__: specifies the IRDA interrupt source to disable.
+ * This parameter can be one of the following values:
+ * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt
+ * @arg IRDA_IT_TC: Transmission complete interrupt
+ * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt
+ * @arg IRDA_IT_IDLE: Idle line detection interrupt
+ * @arg IRDA_IT_PE: Parity Error interrupt
+ * @arg IRDA_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_IRDA_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \
+ ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & IRDA_IT_MASK))))
+
+
+/** @brief Checks whether the specified IRDA interrupt has occurred or not.
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral
+ * @param __IT__: specifies the IRDA interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt
+ * @arg IRDA_IT_TC: Transmission complete interrupt
+ * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt
+ * @arg IRDA_IT_IDLE: Idle line detection interrupt
+ * @arg IRDA_IT_ORE: OverRun Error interrupt
+ * @arg IRDA_IT_NE: Noise Error interrupt
+ * @arg IRDA_IT_FE: Framing Error interrupt
+ * @arg IRDA_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_IRDA_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & ((uint32_t)1U << ((__IT__)>> 0x08)))
+
+/** @brief Checks whether the specified IRDA interrupt source is enabled.
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral
+ * @param __IT__: specifies the IRDA interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt
+ * @arg IRDA_IT_TC: Transmission complete interrupt
+ * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt
+ * @arg IRDA_IT_IDLE: Idle line detection interrupt
+ * @arg IRDA_IT_ORE: OverRun Error interrupt
+ * @arg IRDA_IT_NE: Noise Error interrupt
+ * @arg IRDA_IT_FE: Framing Error interrupt
+ * @arg IRDA_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_IRDA_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((uint8_t)(__IT__)) >> 5U) == 1)? (__HANDLE__)->Instance->CR1:(((((uint8_t)(__IT__)) >> 5U) == 2)? \
+ (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & ((uint32_t)1 << (((uint16_t)(__IT__)) & IRDA_IT_MASK)))
+
+
+/** @brief Clears the specified IRDA ISR flag, in setting the proper ICR register flag.
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral
+ * @param __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set
+ * to clear the corresponding interrupt
+ * This parameter can be one of the following values:
+ * @arg IRDA_CLEAR_PEF: Parity Error Clear Flag
+ * @arg IRDA_CLEAR_FEF: Framing Error Clear Flag
+ * @arg IRDA_CLEAR_NEF: Noise detected Clear Flag
+ * @arg IRDA_CLEAR_OREF: OverRun Error Clear Flag
+ * @arg IRDA_CLEAR_TCF: Transmission Complete Clear Flag
+ * @retval None
+ */
+#define __HAL_IRDA_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__))
+
+
+/** @brief Set a specific IRDA request flag.
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral
+ * @param __REQ__: specifies the request flag to set
+ * This parameter can be one of the following values:
+ * @arg IRDA_AUTOBAUD_REQUEST: Auto-Baud Rate Request
+ * @arg IRDA_RXDATA_FLUSH_REQUEST: Receive Data flush Request
+ * @arg IRDA_TXDATA_FLUSH_REQUEST: Transmit data flush Request
+ *
+ * @retval None
+ */
+#define __HAL_IRDA_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__))
+
+
+
+/** @brief Enable UART/USART associated to IRDA Handle
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral
+ * @retval None
+ */
+#define __HAL_IRDA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
+
+/** @brief Disable UART/USART associated to IRDA Handle
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral
+ * @retval None
+ */
+#define __HAL_IRDA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
+
+/** @brief Ensure that IRDA Baud rate is less or equal to maximum value
+ * @param __BAUDRATE__: specifies the IRDA Baudrate set by the user.
+ * @retval True or False
+ */
+#define IS_IRDA_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 115201)
+
+/** @brief Ensure that IRDA prescaler value is strictly larger than 0
+ * @param __PRESCALER__: specifies the IRDA prescaler value set by the user.
+ * @retval True or False
+ */
+#define IS_IRDA_PRESCALER(__PRESCALER__) ((__PRESCALER__) > 0)
+
+/**
+ * @}
+ */
+
+/* Include IRDA HAL Extended module */
+#include "stm32f0xx_hal_irda_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup IRDA_Exported_Functions IRDA Exported Functions
+ * @{
+ */
+
+/** @addtogroup IRDA_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_IRDA_Init(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_DeInit(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_MspInit(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_MspDeInit(IRDA_HandleTypeDef *hirda);
+
+/**
+ * @}
+ */
+
+/** @addtogroup IRDA_Exported_Functions_Group2 IO operation functions
+ * @{
+ */
+
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_IRDA_Receive(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+void HAL_IRDA_IRQHandler(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_TxCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_RxCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_ErrorCallback(IRDA_HandleTypeDef *hirda);
+
+/**
+ * @}
+ */
+
+/** @addtogroup IRDA_Exported_Functions_Group3
+ * @{
+ */
+
+/* Peripheral State and Error functions ***************************************/
+HAL_IRDA_StateTypeDef HAL_IRDA_GetState(IRDA_HandleTypeDef *hirda);
+uint32_t HAL_IRDA_GetError(IRDA_HandleTypeDef *hirda);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_IRDA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/include/stm32f0xx_hal_irda_ex.h b/f0/include/stm32f0xx_hal_irda_ex.h
new file mode 100755
index 0000000000000000000000000000000000000000..2e97a63e22b410edced00ad1dfcc9e3ba00590c6
--- /dev/null
+++ b/f0/include/stm32f0xx_hal_irda_ex.h
@@ -0,0 +1,415 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_irda_ex.h
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief Header file of IRDA HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_IRDA_EX_H
+#define __STM32F0xx_HAL_IRDA_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup IRDAEx IRDAEx Extended HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup IRDAEx_Exported_Constants IRDAEx Exported Constants
+ * @{
+ */
+
+/** @defgroup IRDAEx_Word_Length IRDA Word Length
+ * @{
+ */
+#if defined (STM32F042x6) || defined (STM32F048xx) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+ defined (STM32F091xC) || defined (STM32F098xx)
+#define IRDA_WORDLENGTH_7B ((uint32_t)USART_CR1_M1)
+#define IRDA_WORDLENGTH_8B ((uint32_t)0x00000000)
+#define IRDA_WORDLENGTH_9B ((uint32_t)USART_CR1_M0)
+#define IS_IRDA_WORD_LENGTH(LENGTH) (((LENGTH) == IRDA_WORDLENGTH_7B) || \
+ ((LENGTH) == IRDA_WORDLENGTH_8B) || \
+ ((LENGTH) == IRDA_WORDLENGTH_9B))
+#else
+#define IRDA_WORDLENGTH_8B ((uint32_t)0x00000000)
+#define IRDA_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
+#define IS_IRDA_WORD_LENGTH(LENGTH) (((LENGTH) == IRDA_WORDLENGTH_8B) || \
+ ((LENGTH) == IRDA_WORDLENGTH_9B))
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+ defined (STM32F091xC) || defined (STM32F098xx)*/
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @defgroup IRDAEx_Exported_Macros IRDAEx Exported Macros
+ * @{
+ */
+
+/** @brief Reports the IRDA clock source.
+ * @param __HANDLE__: specifies the IRDA Handle
+ * @param __CLOCKSOURCE__ : output variable
+ * @retval IRDA clocking source, written in __CLOCKSOURCE__.
+ */
+
+#if defined(STM32F031x6) || defined(STM32F038xx)
+#define __HAL_IRDA_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } while(0)
+#elif defined (STM32F042x6) || defined (STM32F048xx) || \
+ defined (STM32F051x8) || defined (STM32F058xx)
+#define __HAL_IRDA_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+#elif defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)
+#define __HAL_IRDA_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+#elif defined(STM32F091xC) || defined(STM32F098xx)
+#define __HAL_IRDA_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ switch(__HAL_RCC_GET_USART3_SOURCE()) \
+ { \
+ case RCC_USART3CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART3CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART3CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART3CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART5) \
+ { \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART6) \
+ { \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART7) \
+ { \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART8) \
+ { \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+
+#endif /* defined(STM32F031x6) || defined(STM32F038xx) */
+
+
+/** @brief Computes the mask to apply to retrieve the received data
+ * according to the word length and to the parity bits activation.
+ * @param __HANDLE__: specifies the IRDA Handle
+ * @retval none
+ */
+#if defined (STM32F042x6) || defined (STM32F048xx) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+ defined (STM32F091xC) || defined (STM32F098xx)
+#define __HAL_IRDA_MASK_COMPUTATION(__HANDLE__) \
+ do { \
+ if ((__HANDLE__)->Init.WordLength == IRDA_WORDLENGTH_9B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == IRDA_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x01FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == IRDA_WORDLENGTH_8B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == IRDA_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x007F ; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == IRDA_WORDLENGTH_7B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == IRDA_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x007F ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x003F ; \
+ } \
+ } \
+} while(0)
+#else
+#define __HAL_IRDA_MASK_COMPUTATION(__HANDLE__) \
+ do { \
+ if ((__HANDLE__)->Init.WordLength == IRDA_WORDLENGTH_9B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == IRDA_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x01FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == IRDA_WORDLENGTH_8B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == IRDA_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x007F ; \
+ } \
+ } \
+} while(0)
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+ defined (STM32F091xC) || defined(STM32F098xx) */
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/* Initialization and de-initialization functions ****************************/
+/* IO operation functions *****************************************************/
+/* Peripheral Control functions ***********************************************/
+/* Peripheral State and Error functions ***************************************/
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_IRDA_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/include/stm32f0xx_hal_iwdg.h b/f0/include/stm32f0xx_hal_iwdg.h
new file mode 100755
index 0000000000000000000000000000000000000000..ed00d561597b96762bbebcfe30e0f067b3aa0c9b
--- /dev/null
+++ b/f0/include/stm32f0xx_hal_iwdg.h
@@ -0,0 +1,311 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_iwdg.h
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief Header file of IWDG HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_IWDG_H
+#define __STM32F0xx_HAL_IWDG_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup IWDG
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup IWDG_Exported_Types IWDG Exported Types
+ * @{
+ */
+
+/**
+ * @brief IWDG HAL State Structure definition
+ */
+typedef enum
+{
+ HAL_IWDG_STATE_RESET = 0x00, /*!< IWDG not yet initialized or disabled */
+ HAL_IWDG_STATE_READY = 0x01, /*!< IWDG initialized and ready for use */
+ HAL_IWDG_STATE_BUSY = 0x02, /*!< IWDG internal process is ongoing */
+ HAL_IWDG_STATE_TIMEOUT = 0x03, /*!< IWDG timeout state */
+ HAL_IWDG_STATE_ERROR = 0x04 /*!< IWDG error state */
+
+}HAL_IWDG_StateTypeDef;
+
+/**
+ * @brief IWDG Init structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Select the prescaler of the IWDG.
+ This parameter can be a value of @ref IWDG_Prescaler */
+
+ uint32_t Reload; /*!< Specifies the IWDG down-counter reload value.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x0FFF */
+
+ uint32_t Window; /*!< Specifies the window value to be compared to the down-counter.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x0FFF */
+
+} IWDG_InitTypeDef;
+
+/**
+ * @brief IWDG Handle Structure definition
+ */
+typedef struct
+{
+ IWDG_TypeDef *Instance; /*!< Register base address */
+
+ IWDG_InitTypeDef Init; /*!< IWDG required parameters */
+
+ HAL_LockTypeDef Lock; /*!< IWDG Locking object */
+
+ __IO HAL_IWDG_StateTypeDef State; /*!< IWDG communication state */
+
+}IWDG_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup IWDG_Exported_Constants IWDG Exported Constants
+ * @{
+ */
+
+/** @defgroup IWDG_Registers_BitMask IWDG Registers BitMask
+ * @brief IWDG registers bit mask
+ * @{
+ */
+/* --- KR Register ---*/
+/* KR register bit mask */
+#define KR_KEY_RELOAD ((uint32_t)0xAAAA) /*!< IWDG Reload Counter Enable */
+#define KR_KEY_ENABLE ((uint32_t)0xCCCC) /*!< IWDG Peripheral Enable */
+#define KR_KEY_EWA ((uint32_t)0x5555) /*!< IWDG KR Write Access Enable */
+#define KR_KEY_DWA ((uint32_t)0x0000) /*!< IWDG KR Write Access Disable */
+
+#define IS_IWDG_KR(__KR__) (((__KR__) == KR_KEY_RELOAD) || \
+ ((__KR__) == KR_KEY_ENABLE))|| \
+ ((__KR__) == KR_KEY_EWA)) || \
+ ((__KR__) == KR_KEY_DWA))
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Flag_definition IWDG Flag definition
+ * @{
+ */
+#define IWDG_FLAG_PVU ((uint32_t)IWDG_SR_PVU) /*!< Watchdog counter prescaler value update Flag */
+#define IWDG_FLAG_RVU ((uint32_t)IWDG_SR_RVU) /*!< Watchdog counter reload value update Flag */
+#define IWDG_FLAG_WVU ((uint32_t)IWDG_SR_WVU) /*!< Watchdog counter window value update Flag */
+
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Prescaler IWDG Prescaler
+ * @{
+ */
+#define IWDG_PRESCALER_4 ((uint8_t)0x00) /*!< IWDG prescaler set to 4 */
+#define IWDG_PRESCALER_8 ((uint8_t)(IWDG_PR_PR_0)) /*!< IWDG prescaler set to 8 */
+#define IWDG_PRESCALER_16 ((uint8_t)(IWDG_PR_PR_1)) /*!< IWDG prescaler set to 16 */
+#define IWDG_PRESCALER_32 ((uint8_t)(IWDG_PR_PR_1 | IWDG_PR_PR_0)) /*!< IWDG prescaler set to 32 */
+#define IWDG_PRESCALER_64 ((uint8_t)(IWDG_PR_PR_2)) /*!< IWDG prescaler set to 64 */
+#define IWDG_PRESCALER_128 ((uint8_t)(IWDG_PR_PR_2 | IWDG_PR_PR_0)) /*!< IWDG prescaler set to 128 */
+#define IWDG_PRESCALER_256 ((uint8_t)(IWDG_PR_PR_2 | IWDG_PR_PR_1)) /*!< IWDG prescaler set to 256 */
+
+#define IS_IWDG_PRESCALER(__PRESCALER__) (((__PRESCALER__) == IWDG_PRESCALER_4) || \
+ ((__PRESCALER__) == IWDG_PRESCALER_8) || \
+ ((__PRESCALER__) == IWDG_PRESCALER_16) || \
+ ((__PRESCALER__) == IWDG_PRESCALER_32) || \
+ ((__PRESCALER__) == IWDG_PRESCALER_64) || \
+ ((__PRESCALER__) == IWDG_PRESCALER_128)|| \
+ ((__PRESCALER__) == IWDG_PRESCALER_256))
+
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Reload_Value IWDG Reload Value
+ * @{
+ */
+#define IS_IWDG_RELOAD(__RELOAD__) ((__RELOAD__) <= 0xFFF)
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_CounterWindow_Value IWDG CounterWindow Value
+ * @{
+ */
+#define IS_IWDG_WINDOW(__VALUE__) ((__VALUE__) <= 0xFFF)
+/**
+ * @}
+ */
+/** @defgroup IWDG_Window_option IWDG Window option
+ * @{
+ */
+#define IWDG_WINDOW_DISABLE 0xFFF
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @defgroup IWDG_Exported_Macros IWDG Exported Macros
+ * @{
+ */
+
+/** @brief Reset IWDG handle state
+ * @param __HANDLE__: IWDG handle.
+ * @retval None
+ */
+#define __HAL_IWDG_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_IWDG_STATE_RESET)
+
+/**
+ * @brief Enables the IWDG peripheral.
+ * @param __HANDLE__: IWDG handle
+ * @retval None
+ */
+#define __HAL_IWDG_START(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, KR_KEY_ENABLE)
+
+/**
+ * @brief Reloads IWDG counter with value defined in the reload register
+ * (write access to IWDG_PR and IWDG_RLR registers disabled).
+ * @param __HANDLE__: IWDG handle
+ * @retval None
+ */
+#define __HAL_IWDG_RELOAD_COUNTER(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, KR_KEY_RELOAD)
+
+/**
+ * @brief Enable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers.
+ * @param __HANDLE__: IWDG handle
+ * @retval None
+ */
+#define __HAL_IWDG_ENABLE_WRITE_ACCESS(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, KR_KEY_EWA)
+
+/**
+ * @brief Disable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers.
+ * @param __HANDLE__: IWDG handle
+ * @retval None
+ */
+#define __HAL_IWDG_DISABLE_WRITE_ACCESS(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, KR_KEY_DWA)
+
+/**
+ * @brief Gets the selected IWDG's flag status.
+ * @param __HANDLE__: IWDG handle
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg IWDG_FLAG_PVU: Watchdog counter reload value update flag
+ * @arg IWDG_FLAG_RVU: Watchdog counter prescaler value flag
+ * @arg IWDG_FLAG_WVU: Watchdog counter window value flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_IWDG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup IWDG_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup IWDG_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions ********************************/
+HAL_StatusTypeDef HAL_IWDG_Init(IWDG_HandleTypeDef *hiwdg);
+void HAL_IWDG_MspInit(IWDG_HandleTypeDef *hiwdg);
+
+/**
+ * @}
+ */
+
+/** @addtogroup IWDG_Exported_Functions_Group2
+ * @{
+ */
+/* I/O operation functions ****************************************************/
+HAL_StatusTypeDef HAL_IWDG_Start(IWDG_HandleTypeDef *hiwdg);
+HAL_StatusTypeDef HAL_IWDG_Refresh(IWDG_HandleTypeDef *hiwdg);
+
+/**
+ * @}
+ */
+
+/** @addtogroup IWDG_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral State functions ************************************************/
+HAL_IWDG_StateTypeDef HAL_IWDG_GetState(IWDG_HandleTypeDef *hiwdg);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_IWDG_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/include/stm32f0xx_hal_pcd.h b/f0/include/stm32f0xx_hal_pcd.h
new file mode 100755
index 0000000000000000000000000000000000000000..c90423c16da40323be099dcb95de311de26d7a4f
--- /dev/null
+++ b/f0/include/stm32f0xx_hal_pcd.h
@@ -0,0 +1,783 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_pcd.h
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief Header file of PCD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_PCD_H
+#define __STM32F0xx_HAL_PCD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)|| defined(STM32F070x6)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PCD
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup PCD_Exported_Types PCD Exported Types
+ * @{
+ */
+
+/**
+ * @brief PCD State structures definition
+ */
+typedef enum
+{
+ PCD_READY = 0x00,
+ PCD_ERROR = 0x01,
+ PCD_BUSY = 0x02,
+ PCD_TIMEOUT = 0x03
+} PCD_StateTypeDef;
+
+typedef enum
+{
+ /* double buffered endpoint direction */
+ PCD_EP_DBUF_OUT,
+ PCD_EP_DBUF_IN,
+ PCD_EP_DBUF_ERR,
+}PCD_EP_DBUF_DIR;
+
+/* endpoint buffer number */
+typedef enum
+{
+ PCD_EP_NOBUF,
+ PCD_EP_BUF0,
+ PCD_EP_BUF1
+}PCD_EP_BUF_NUM;
+
+/**
+ * @brief PCD Initialization Structure definition
+ */
+typedef struct
+{
+ uint32_t dev_endpoints; /*!< Device Endpoints number.
+ This parameter depends on the used USB core.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+ uint32_t speed; /*!< USB Core speed.
+ This parameter can be any value of @ref PCD_Core_Speed */
+
+ uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size.
+ This parameter can be any value of @ref PCD_EP0_MPS */
+
+ uint32_t phy_itface; /*!< Select the used PHY interface.
+ This parameter can be any value of @ref PCD_Core_PHY */
+
+ uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal.
+ This parameter can be set to ENABLE or DISABLE */
+
+ uint32_t low_power_enable; /*!< Enable or disable Low Power mode
+ This parameter can be set to ENABLE or DISABLE */
+
+ uint32_t lpm_enable; /*!< Enable or disable the Link Power Management .
+ This parameter can be set to ENABLE or DISABLE */
+
+ uint32_t battery_charging_enable; /*!< Enable or disable Battery charging.
+ This parameter can be set to ENABLE or DISABLE */
+
+}PCD_InitTypeDef;
+
+typedef struct
+{
+ uint8_t num; /*!< Endpoint number
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+ uint8_t is_in; /*!< Endpoint direction
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint8_t is_stall; /*!< Endpoint stall condition
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint8_t type; /*!< Endpoint type
+ This parameter can be any value of @ref PCD_EP_Type */
+
+ uint16_t pmaadress; /*!< PMA Address
+ This parameter can be any value between Min_addr = 0 and Max_addr = 1K */
+
+
+ uint16_t pmaaddr0; /*!< PMA Address0
+ This parameter can be any value between Min_addr = 0 and Max_addr = 1K */
+
+
+ uint16_t pmaaddr1; /*!< PMA Address1
+ This parameter can be any value between Min_addr = 0 and Max_addr = 1K */
+
+
+ uint8_t doublebuffer; /*!< Double buffer enable
+ This parameter can be 0 or 1 */
+
+ uint32_t maxpacket; /*!< Endpoint Max packet size
+ This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */
+
+ uint8_t *xfer_buff; /*!< Pointer to transfer buffer */
+
+
+ uint32_t xfer_len; /*!< Current transfer length */
+
+ uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */
+
+}PCD_EPTypeDef;
+
+typedef USB_TypeDef PCD_TypeDef;
+
+/**
+ * @brief PCD Handle Structure definition
+ */
+typedef struct
+{
+ PCD_TypeDef *Instance; /*!< Register base address */
+ PCD_InitTypeDef Init; /*!< PCD required parameters */
+ __IO uint8_t USB_Address; /*!< USB Address */
+ PCD_EPTypeDef IN_ep[8]; /*!< IN endpoint parameters */
+ PCD_EPTypeDef OUT_ep[8]; /*!< OUT endpoint parameters */
+ HAL_LockTypeDef Lock; /*!< PCD peripheral status */
+ __IO PCD_StateTypeDef State; /*!< PCD communication state */
+ uint32_t Setup[12]; /*!< Setup packet buffer */
+ void *pData; /*!< Pointer to upper stack Handler */
+
+} PCD_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+#include "stm32f0xx_hal_pcd_ex.h"
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PCD_Exported_Constants PCD Exported Constants
+ * @{
+ */
+
+/** @defgroup PCD_Core_Speed PCD Core Speed
+ * @{
+ */
+#define PCD_SPEED_HIGH 0 /* Not Supported */
+#define PCD_SPEED_FULL 2
+/**
+ * @}
+ */
+
+ /** @defgroup PCD_Core_PHY PCD Core PHY
+ * @{
+ */
+#define PCD_PHY_EMBEDDED 2
+/**
+ * @}
+ */
+
+/** @defgroup PCD_EP0_MPS PCD EP0 MPS
+ * @{
+ */
+#define DEP0CTL_MPS_64 0
+#define DEP0CTL_MPS_32 1
+#define DEP0CTL_MPS_16 2
+#define DEP0CTL_MPS_8 3
+
+#define PCD_EP0MPS_64 DEP0CTL_MPS_64
+#define PCD_EP0MPS_32 DEP0CTL_MPS_32
+#define PCD_EP0MPS_16 DEP0CTL_MPS_16
+#define PCD_EP0MPS_08 DEP0CTL_MPS_8
+/**
+ * @}
+ */
+
+/** @defgroup PCD_EP_Type PCD EP Type
+ * @{
+ */
+#define PCD_EP_TYPE_CTRL 0
+#define PCD_EP_TYPE_ISOC 1
+#define PCD_EP_TYPE_BULK 2
+#define PCD_EP_TYPE_INTR 3
+/**
+ * @}
+ */
+
+/** @defgroup PCD_ENDP_Type PCD_ENDP_Type
+ * @{
+ */
+
+#define PCD_ENDP0 ((uint8_t)0)
+#define PCD_ENDP1 ((uint8_t)1)
+#define PCD_ENDP2 ((uint8_t)2)
+#define PCD_ENDP3 ((uint8_t)3)
+#define PCD_ENDP4 ((uint8_t)4)
+#define PCD_ENDP5 ((uint8_t)5)
+#define PCD_ENDP6 ((uint8_t)6)
+#define PCD_ENDP7 ((uint8_t)7)
+
+/* Endpoint Kind */
+#define PCD_SNG_BUF 0
+#define PCD_DBL_BUF 1
+
+#define IS_PCD_ALL_INSTANCE IS_USB_ALL_INSTANCE
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @defgroup PCD_Exported_Macros PCD Exported Macros
+ * @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->ISTR) & (__INTERRUPT__)) == (__INTERRUPT__))
+#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->ISTR) &= ~(__INTERRUPT__))
+
+#define USB_EXTI_LINE_WAKEUP ((uint32_t)0x00040000) /*!< External interrupt line 18 Connected to the USB FS EXTI Line */
+
+#define __HAL_USB_EXTI_ENABLE_IT() EXTI->IMR |= USB_EXTI_LINE_WAKEUP
+#define __HAL_USB_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_EXTI_LINE_WAKEUP)
+#define __HAL_USB_EXTI_GENERATE_SWIT(__EXTILINE__) (EXTI->SWIER |= (__EXTILINE__))
+
+/**
+ * @}
+ */
+
+/* Internal macros -----------------------------------------------------------*/
+
+/** @defgroup PCD_Private_Macros PCD Private Macros
+ * @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+
+/* SetENDPOINT */
+#define PCD_SET_ENDPOINT(USBx, bEpNum,wRegValue) (*(&(USBx)->EP0R + (bEpNum) * 2)= (uint16_t)(wRegValue))
+
+/* GetENDPOINT */
+#define PCD_GET_ENDPOINT(USBx, bEpNum) (*(&(USBx)->EP0R + (bEpNum) * 2))
+
+
+
+/**
+ * @brief sets the type in the endpoint register(bits EP_TYPE[1:0])
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param wType: Endpoint Type.
+ * @retval None
+ */
+#define PCD_SET_EPTYPE(USBx, bEpNum,wType) (PCD_SET_ENDPOINT((USBx), (bEpNum),\
+ ((PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_T_MASK) | (wType) )))
+
+/**
+ * @brief gets the type in the endpoint register(bits EP_TYPE[1:0])
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval Endpoint Type
+ */
+#define PCD_GET_EPTYPE(USBx, bEpNum) (PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_T_FIELD)
+
+
+/**
+ * @brief free buffer used from the application realizing it to the line
+ toggles bit SW_BUF in the double buffered endpoint register
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param bDir: Direction
+ * @retval None
+ */
+#define PCD_FreeUserBuffer(USBx, bEpNum, bDir)\
+{\
+ if ((bDir) == PCD_EP_DBUF_OUT)\
+ { /* OUT double buffered endpoint */\
+ PCD_TX_DTOG((USBx), (bEpNum));\
+ }\
+ else if ((bDir) == PCD_EP_DBUF_IN)\
+ { /* IN double buffered endpoint */\
+ PCD_RX_DTOG((USBx), (bEpNum));\
+ }\
+}
+
+/**
+ * @brief gets direction of the double buffered endpoint
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval EP_DBUF_OUT, EP_DBUF_IN,
+ * EP_DBUF_ERR if the endpoint counter not yet programmed.
+ */
+#define PCD_GET_DB_DIR(USBx, bEpNum)\
+{\
+ if ((uint16_t)(*PCD_EP_RX_CNT((USBx), (bEpNum)) & 0xFC00) != 0)\
+ return(PCD_EP_DBUF_OUT);\
+ else if (((uint16_t)(*PCD_EP_TX_CNT((USBx), (bEpNum))) & 0x03FF) != 0)\
+ return(PCD_EP_DBUF_IN);\
+ else\
+ return(PCD_EP_DBUF_ERR);\
+}
+
+/**
+ * @brief sets the status for tx transfer (bits STAT_TX[1:0]).
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param wState: new state
+ * @retval None
+ */
+#define PCD_SET_EP_TX_STATUS(USBx, bEpNum, wState) {\
+ register uint16_t _wRegVal; \
+ \
+ _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPTX_DTOGMASK;\
+ /* toggle first bit ? */ \
+ if((USB_EPTX_DTOG1 & (wState))!= 0) \
+ _wRegVal ^= USB_EPTX_DTOG1; \
+ /* toggle second bit ? */ \
+ if((USB_EPTX_DTOG2 & (wState))!= 0) \
+ _wRegVal ^= USB_EPTX_DTOG2; \
+ PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX|USB_EP_CTR_TX)); \
+ } /* PCD_SET_EP_TX_STATUS */
+
+/**
+ * @brief sets the status for rx transfer (bits STAT_TX[1:0])
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param wState: new state
+ * @retval None
+ */
+#define PCD_SET_EP_RX_STATUS(USBx, bEpNum,wState) {\
+ register uint16_t _wRegVal; \
+ \
+ _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPRX_DTOGMASK;\
+ /* toggle first bit ? */ \
+ if((USB_EPRX_DTOG1 & (wState))!= 0) \
+ _wRegVal ^= USB_EPRX_DTOG1; \
+ /* toggle second bit ? */ \
+ if((USB_EPRX_DTOG2 & (wState))!= 0) \
+ _wRegVal ^= USB_EPRX_DTOG2; \
+ PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX|USB_EP_CTR_TX)); \
+ } /* PCD_SET_EP_RX_STATUS */
+
+/**
+ * @brief sets the status for rx & tx (bits STAT_TX[1:0] & STAT_RX[1:0])
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param wStaterx: new state.
+ * @param wStatetx: new state.
+ * @retval None
+ */
+#define PCD_SET_EP_TXRX_STATUS(USBx,bEpNum,wStaterx,wStatetx) {\
+ register uint32_t _wRegVal; \
+ \
+ _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & (USB_EPRX_DTOGMASK |USB_EPTX_STAT) ;\
+ /* toggle first bit ? */ \
+ if((USB_EPRX_DTOG1 & ((wStaterx)))!= 0) \
+ _wRegVal ^= USB_EPRX_DTOG1; \
+ /* toggle second bit ? */ \
+ if((USB_EPRX_DTOG2 & (wStaterx))!= 0) \
+ _wRegVal ^= USB_EPRX_DTOG2; \
+ /* toggle first bit ? */ \
+ if((USB_EPTX_DTOG1 & (wStatetx))!= 0) \
+ _wRegVal ^= USB_EPTX_DTOG1; \
+ /* toggle second bit ? */ \
+ if((USB_EPTX_DTOG2 & (wStatetx))!= 0) \
+ _wRegVal ^= USB_EPTX_DTOG2; \
+ PCD_SET_ENDPOINT((USBx), (bEpNum), _wRegVal | USB_EP_CTR_RX|USB_EP_CTR_TX); \
+ } /* PCD_SET_EP_TXRX_STATUS */
+
+/**
+ * @brief gets the status for tx/rx transfer (bits STAT_TX[1:0]
+ * /STAT_RX[1:0])
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval status
+ */
+#define PCD_GET_EP_TX_STATUS(USBx, bEpNum) ((uint16_t)PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPTX_STAT)
+
+#define PCD_GET_EP_RX_STATUS(USBx, bEpNum) ((uint16_t)PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPRX_STAT)
+
+/**
+ * @brief sets directly the VALID tx/rx-status into the endpoint register
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval None
+ */
+#define PCD_SET_EP_TX_VALID(USBx, bEpNum) (PCD_SET_EP_TX_STATUS((USBx), (bEpNum), USB_EP_TX_VALID))
+
+#define PCD_SET_EP_RX_VALID(USBx, bEpNum) (PCD_SET_EP_RX_STATUS((USBx), (bEpNum), USB_EP_RX_VALID))
+
+/**
+ * @brief checks stall condition in an endpoint.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval TRUE = endpoint in stall condition.
+ */
+#define PCD_GET_EP_TX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_TX_STATUS((USBx), (bEpNum)) \
+ == USB_EP_TX_STALL)
+#define PCD_GET_EP_RX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_RX_STATUS((USBx), (bEpNum)) \
+ == USB_EP_RX_STALL)
+
+/**
+ * @brief set & clear EP_KIND bit.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval None
+ */
+#define PCD_SET_EP_KIND(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum), \
+ (USB_EP_CTR_RX|USB_EP_CTR_TX|((PCD_GET_ENDPOINT((USBx), (bEpNum)) | USB_EP_KIND) & USB_EPREG_MASK))))
+#define PCD_CLEAR_EP_KIND(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum), \
+ (USB_EP_CTR_RX|USB_EP_CTR_TX|(PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPKIND_MASK))))
+
+/**
+ * @brief Sets/clears directly STATUS_OUT bit in the endpoint register.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval None
+ */
+#define PCD_SET_OUT_STATUS(USBx, bEpNum) PCD_SET_EP_KIND((USBx), (bEpNum))
+#define PCD_CLEAR_OUT_STATUS(USBx, bEpNum) PCD_CLEAR_EP_KIND((USBx), (bEpNum))
+
+/**
+ * @brief Sets/clears directly EP_KIND bit in the endpoint register.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval None
+ */
+#define PCD_SET_EP_DBUF(USBx, bEpNum) PCD_SET_EP_KIND((USBx), (bEpNum))
+#define PCD_CLEAR_EP_DBUF(USBx, bEpNum) PCD_CLEAR_EP_KIND((USBx), (bEpNum))
+
+/**
+ * @brief Clears bit CTR_RX / CTR_TX in the endpoint register.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval None
+ */
+#define PCD_CLEAR_RX_EP_CTR(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum),\
+ PCD_GET_ENDPOINT((USBx), (bEpNum)) & 0x7FFF & USB_EPREG_MASK))
+#define PCD_CLEAR_TX_EP_CTR(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum),\
+ PCD_GET_ENDPOINT((USBx), (bEpNum)) & 0xFF7F & USB_EPREG_MASK))
+
+/**
+ * @brief Toggles DTOG_RX / DTOG_TX bit in the endpoint register.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval None
+ */
+#define PCD_RX_DTOG(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum), \
+ USB_EP_CTR_RX|USB_EP_CTR_TX|USB_EP_DTOG_RX | (PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK)))
+#define PCD_TX_DTOG(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum), \
+ USB_EP_CTR_RX|USB_EP_CTR_TX|USB_EP_DTOG_TX | (PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK)))
+
+/**
+ * @brief Clears DTOG_RX / DTOG_TX bit in the endpoint register.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval None
+ */
+#define PCD_CLEAR_RX_DTOG(USBx, bEpNum) if((PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_DTOG_RX) != 0)\
+ PCD_RX_DTOG((USBx), (bEpNum))
+#define PCD_CLEAR_TX_DTOG(USBx, bEpNum) if((PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_DTOG_TX) != 0)\
+ PCD_TX_DTOG((USBx), (bEpNum))
+
+/**
+ * @brief Sets address in an endpoint register.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param bAddr: Address.
+ * @retval None
+ */
+#define PCD_SET_EP_ADDRESS(USBx, bEpNum,bAddr) PCD_SET_ENDPOINT((USBx), (bEpNum),\
+ USB_EP_CTR_RX|USB_EP_CTR_TX|(PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK) | (bAddr))
+
+/**
+ * @brief Gets address in an endpoint register.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval None
+ */
+#define PCD_GET_EP_ADDRESS(USBx, bEpNum) ((uint8_t)(PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPADDR_FIELD))
+
+#define PCD_EP_TX_ADDRESS(USBx, bEpNum) ((uint16_t *)(((USBx)->BTABLE+(bEpNum)*8)+ ((uint32_t)(USBx) + 0x400)))
+#define PCD_EP_TX_CNT(USBx, bEpNum) ((uint16_t *)(((USBx)->BTABLE+(bEpNum)*8+2)+ ((uint32_t)(USBx) + 0x400)))
+#define PCD_EP_RX_ADDRESS(USBx, bEpNum) ((uint16_t *)(((USBx)->BTABLE+(bEpNum)*8+4)+ ((uint32_t)(USBx) + 0x400)))
+#define PCD_EP_RX_CNT(USBx, bEpNum) ((uint16_t *)(((USBx)->BTABLE+(bEpNum)*8+6)+ ((uint32_t)(USBx) + 0x400)))
+
+/**
+ * @brief sets address of the tx/rx buffer.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param wAddr: address to be set (must be word aligned).
+ * @retval None
+ */
+#define PCD_SET_EP_TX_ADDRESS(USBx, bEpNum,wAddr) (*PCD_EP_TX_ADDRESS((USBx), (bEpNum)) = (((wAddr) >> 1) << 1))
+#define PCD_SET_EP_RX_ADDRESS(USBx, bEpNum,wAddr) (*PCD_EP_RX_ADDRESS((USBx), (bEpNum)) = (((wAddr) >> 1) << 1))
+
+/**
+ * @brief Gets address of the tx/rx buffer.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval address of the buffer.
+ */
+#define PCD_GET_EP_TX_ADDRESS(USBx, bEpNum) ((uint16_t)*PCD_EP_TX_ADDRESS((USBx), (bEpNum)))
+#define PCD_GET_EP_RX_ADDRESS(USBx, bEpNum) ((uint16_t)*PCD_EP_RX_ADDRESS((USBx), (bEpNum)))
+
+/**
+ * @brief Sets counter of rx buffer with no. of blocks.
+ * @param dwReg: Register
+ * @param wCount: Counter.
+ * @param wNBlocks: no. of Blocks.
+ * @retval None
+ */
+#define PCD_CALC_BLK32(dwReg,wCount,wNBlocks) {\
+ (wNBlocks) = (wCount) >> 5;\
+ if(((wCount) & 0x1f) == 0)\
+ (wNBlocks)--;\
+ *pdwReg = (uint16_t)(((wNBlocks) << 10) | 0x8000);\
+ }/* PCD_CALC_BLK32 */
+
+#define PCD_CALC_BLK2(dwReg,wCount,wNBlocks) {\
+ (wNBlocks) = (wCount) >> 1;\
+ if(((wCount) & 0x1) != 0)\
+ (wNBlocks)++;\
+ *pdwReg = (uint16_t)((wNBlocks) << 10);\
+ }/* PCD_CALC_BLK2 */
+
+#define PCD_SET_EP_CNT_RX_REG(dwReg,wCount) {\
+ uint16_t wNBlocks;\
+ if((wCount) > 62){PCD_CALC_BLK32((dwReg),(wCount),wNBlocks);}\
+ else {PCD_CALC_BLK2((dwReg),(wCount),wNBlocks);}\
+ }/* PCD_SET_EP_CNT_RX_REG */
+
+#define PCD_SET_EP_RX_DBUF0_CNT(USBx, bEpNum,wCount) {\
+ uint16_t *pdwReg = PCD_EP_TX_CNT((USBx), (bEpNum)); \
+ PCD_SET_EP_CNT_RX_REG(pdwReg, (wCount));\
+ }
+/**
+ * @brief sets counter for the tx/rx buffer.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param wCount: Counter value.
+ * @retval None
+ */
+#define PCD_SET_EP_TX_CNT(USBx, bEpNum,wCount) (*PCD_EP_TX_CNT((USBx), (bEpNum)) = (wCount))
+#define PCD_SET_EP_RX_CNT(USBx, bEpNum,wCount) {\
+ uint16_t *pdwReg = PCD_EP_RX_CNT(USBx, bEpNum); \
+ PCD_SET_EP_CNT_RX_REG(pdwReg, wCount);\
+ }
+
+/**
+ * @brief gets counter of the tx buffer.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval Counter value
+ */
+#define PCD_GET_EP_TX_CNT(USBx, bEpNum)((uint16_t)(*PCD_EP_TX_CNT((USBx), (bEpNum))) & 0x3ff)
+#define PCD_GET_EP_RX_CNT(USBx, bEpNum)((uint16_t)(*PCD_EP_RX_CNT((USBx), (bEpNum))) & 0x3ff)
+
+/**
+ * @brief Sets buffer 0/1 address in a double buffer endpoint.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param wBuf0Addr: buffer 0 address.
+ * @retval Counter value
+ */
+#define PCD_SET_EP_DBUF0_ADDR(USBx, bEpNum,wBuf0Addr) {PCD_SET_EP_TX_ADDRESS((USBx), (bEpNum), (wBuf0Addr));}
+#define PCD_SET_EP_DBUF1_ADDR(USBx, bEpNum,wBuf1Addr) {PCD_SET_EP_RX_ADDRESS((USBx), (bEpNum), (wBuf1Addr));}
+
+/**
+ * @brief Sets addresses in a double buffer endpoint.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param wBuf0Addr: buffer 0 address.
+ * @param wBuf1Addr = buffer 1 address.
+ * @retval None
+ */
+#define PCD_SET_EP_DBUF_ADDR(USBx, bEpNum,wBuf0Addr,wBuf1Addr) { \
+ PCD_SET_EP_DBUF0_ADDR((USBx), (bEpNum), (wBuf0Addr));\
+ PCD_SET_EP_DBUF1_ADDR((USBx), (bEpNum), (wBuf1Addr));\
+ } /* PCD_SET_EP_DBUF_ADDR */
+
+/**
+ * @brief Gets buffer 0/1 address of a double buffer endpoint.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval None
+ */
+#define PCD_GET_EP_DBUF0_ADDR(USBx, bEpNum) (PCD_GET_EP_TX_ADDRESS((USBx), (bEpNum)))
+#define PCD_GET_EP_DBUF1_ADDR(USBx, bEpNum) (PCD_GET_EP_RX_ADDRESS((USBx), (bEpNum)))
+
+/**
+ * @brief Gets buffer 0/1 address of a double buffer endpoint.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param bDir: endpoint dir EP_DBUF_OUT = OUT
+ * EP_DBUF_IN = IN
+ * @param wCount: Counter value
+ * @retval None
+ */
+#define PCD_SET_EP_DBUF0_CNT(USBx, bEpNum, bDir, wCount) { \
+ if((bDir) == PCD_EP_DBUF_OUT)\
+ /* OUT endpoint */ \
+ {PCD_SET_EP_RX_DBUF0_CNT((USBx), (bEpNum),(wCount));} \
+ else if((bDir) == PCD_EP_DBUF_IN)\
+ /* IN endpoint */ \
+ *PCD_EP_TX_CNT((USBx), (bEpNum)) = (uint32_t)(wCount); \
+ } /* SetEPDblBuf0Count*/
+
+#define PCD_SET_EP_DBUF1_CNT(USBx, bEpNum, bDir, wCount) { \
+ if((bDir) == PCD_EP_DBUF_OUT)\
+ /* OUT endpoint */ \
+ {PCD_SET_EP_RX_CNT((USBx), (bEpNum),(wCount));}\
+ else if((bDir) == PCD_EP_DBUF_IN)\
+ /* IN endpoint */\
+ *PCD_EP_RX_CNT((USBx), (bEpNum)) = (uint32_t)(wCount); \
+ } /* SetEPDblBuf1Count */
+
+#define PCD_SET_EP_DBUF_CNT(USBx, bEpNum, bDir, wCount) {\
+ PCD_SET_EP_DBUF0_CNT((USBx), (bEpNum), (bDir), (wCount)); \
+ PCD_SET_EP_DBUF1_CNT((USBx), (bEpNum), (bDir), (wCount)); \
+ } /* PCD_SET_EP_DBUF_CNT */
+
+/**
+ * @brief Gets buffer 0/1 rx/tx counter for double buffering.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval None
+ */
+#define PCD_GET_EP_DBUF0_CNT(USBx, bEpNum) (PCD_GET_EP_TX_CNT((USBx), (bEpNum)))
+#define PCD_GET_EP_DBUF1_CNT(USBx, bEpNum) (PCD_GET_EP_RX_CNT((USBx), (bEpNum)))
+
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup PCD_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup PCD_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization and de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DeInit (PCD_HandleTypeDef *hpcd);
+void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd);
+
+/**
+ * @}
+ */
+
+/** @addtogroup PCD_Exported_Functions_Group2
+ * @{
+ */
+/* IO operation functions *****************************************************/
+ /* Non Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd);
+
+void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd);
+
+/**
+ * @}
+ */
+
+/** @addtogroup PCD_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral Control functions ************************************************/
+HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address);
+HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type);
+HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
+HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
+uint16_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_ActiveRemoteWakeup(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DeActiveRemoteWakeup(PCD_HandleTypeDef *hpcd);
+/**
+ * @}
+ */
+
+/** @addtogroup PCD_Exported_Functions_Group4
+ * @{
+ */
+/* Peripheral State functions **************************************************/
+PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F042x6 || STM32F072xB || STM32F078xx || STM32F070xB || STM32F070x6 */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F0xx_HAL_PCD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/include/stm32f0xx_hal_pcd_ex.h b/f0/include/stm32f0xx_hal_pcd_ex.h
new file mode 100755
index 0000000000000000000000000000000000000000..fa375976b107368d353192ecee2c467745968d53
--- /dev/null
+++ b/f0/include/stm32f0xx_hal_pcd_ex.h
@@ -0,0 +1,103 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_pcd_ex.h
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief Header file of PCD HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32L0xx_HAL_PCD_EX_H
+#define __STM32L0xx_HAL_PCD_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx)|| defined(STM32F070xB)|| defined(STM32F070x6)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PCDEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macros -----------------------------------------------------------*/
+/* Internal macros -----------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup PCDEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup PCDEx_Exported_Functions_Group2
+ * @{
+ */
+
+HAL_StatusTypeDef HAL_PCDEx_PMAConfig(PCD_HandleTypeDef *hpcd,
+ uint16_t ep_addr,
+ uint16_t ep_kind,
+ uint32_t pmaadress);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F042x6 || STM32F072xB || STM32F078xx || STM32F070xB || STM32F070x6*/
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F0xx_HAL_PCD_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/include/stm32f0xx_hal_pwr.h b/f0/include/stm32f0xx_hal_pwr.h
new file mode 100755
index 0000000000000000000000000000000000000000..bfad2bc097dd5204a8d040cc3bc652202210c4e2
--- /dev/null
+++ b/f0/include/stm32f0xx_hal_pwr.h
@@ -0,0 +1,207 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_pwr.h
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief Header file of PWR HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_PWR_H
+#define __STM32F0xx_HAL_PWR_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PWR PWR HAL module Driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup PWR_Exported_Constants PWR Exported Constants
+ * @{
+ */
+
+/** @defgroup PWR_Regulator_state_in_STOP_mode PWR Regulator state in STOP mode
+ * @{
+ */
+#define PWR_MAINREGULATOR_ON ((uint32_t)0x00000000)
+#define PWR_LOWPOWERREGULATOR_ON PWR_CR_LPDS
+
+#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \
+ ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON))
+/**
+ * @}
+ */
+
+/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry
+ * @{
+ */
+#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01)
+#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02)
+#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE))
+/**
+ * @}
+ */
+
+/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry
+ * @{
+ */
+#define PWR_STOPENTRY_WFI ((uint8_t)0x01)
+#define PWR_STOPENTRY_WFE ((uint8_t)0x02)
+#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE))
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PWR_Exported_Macro PWR Exported Macro
+ * @{
+ */
+
+/** @brief Check PWR flag is set or not.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event
+ * was received from the WKUP pin or from the RTC alarm (Alarm A),
+ * RTC Tamper event, RTC TimeStamp event or RTC Wakeup.
+ * An additional wakeup event is detected if the WKUP pin is enabled
+ * (by setting the EWUP bit) when the WKUP pin level is already high.
+ * @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was
+ * resumed from StandBy mode.
+ * @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled
+ * by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode
+ * For this reason, this bit is equal to 0 after Standby or reset
+ * until the PVDE bit is set.
+ * Warning: this Flag is not available on STM32F030x8 products
+ * @arg PWR_FLAG_VREFINTRDY: This flag indicates that the internal reference
+ * voltage VREFINT is ready.
+ * Warning: this Flag is not available on STM32F030x8 products
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the PWR's pending flags.
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be one of the following values:
+ * @arg PWR_FLAG_WU: Wake Up flag
+ * @arg PWR_FLAG_SB: StandBy flag
+ */
+#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->CR |= (__FLAG__) << 2)
+
+
+/**
+ * @}
+ */
+
+/* Include PWR HAL Extension module */
+#include "stm32f0xx_hal_pwr_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup PWR_Exported_Functions PWR Exported Functions
+ * @{
+ */
+
+/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions *****************************/
+void HAL_PWR_DeInit(void);
+
+/**
+ * @}
+ */
+
+/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions
+ * @{
+ */
+
+/* Peripheral Control functions **********************************************/
+void HAL_PWR_EnableBkUpAccess(void);
+void HAL_PWR_DisableBkUpAccess(void);
+
+/* WakeUp pins configuration functions ****************************************/
+void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx);
+void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx);
+
+/* Low Power modes configuration functions ************************************/
+void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
+void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry);
+void HAL_PWR_EnterSTANDBYMode(void);
+
+void HAL_PWR_EnableSleepOnExit(void);
+void HAL_PWR_DisableSleepOnExit(void);
+void HAL_PWR_EnableSEVOnPend(void);
+void HAL_PWR_DisableSEVOnPend(void);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F0xx_HAL_PWR_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/include/stm32f0xx_hal_pwr_ex.h b/f0/include/stm32f0xx_hal_pwr_ex.h
new file mode 100755
index 0000000000000000000000000000000000000000..b36b8f698514338ab9dea14cd832f57ea6204f77
--- /dev/null
+++ b/f0/include/stm32f0xx_hal_pwr_ex.h
@@ -0,0 +1,426 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_pwr_ex.h
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief Header file of PWR HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_PWR_EX_H
+#define __STM32F0xx_HAL_PWR_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PWREx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup PWREx_Exported_Types PWREx Exported Types
+ * @{
+ */
+
+#if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || \
+ defined (STM32F091xC)
+
+/**
+ * @brief PWR PVD configuration structure definition
+ */
+typedef struct
+{
+ uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level
+ This parameter can be a value of @ref PWREx_PVD_detection_level */
+
+ uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins.
+ This parameter can be a value of @ref PWREx_PVD_Mode */
+}PWR_PVDTypeDef;
+
+#endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */
+ /* defined (STM32F071xB) || defined (STM32F072xB) || */
+ /* defined (STM32F091xC) */
+/**
+ * @}
+ */
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup PWREx_Exported_Constants PWREx Exported Constants
+ * @{
+ */
+
+
+/** @defgroup PWREx_WakeUp_Pins PWREx Wakeup Pins
+ * @{
+ */
+#if defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC)
+#define PWR_WAKEUP_PIN1 ((uint32_t)0x00)
+#define PWR_WAKEUP_PIN2 ((uint32_t)0x01)
+#define PWR_WAKEUP_PIN3 ((uint32_t)0x02)
+#define PWR_WAKEUP_PIN4 ((uint32_t)0x03)
+#define PWR_WAKEUP_PIN5 ((uint32_t)0x04)
+#define PWR_WAKEUP_PIN6 ((uint32_t)0x05)
+#define PWR_WAKEUP_PIN7 ((uint32_t)0x06)
+#define PWR_WAKEUP_PIN8 ((uint32_t)0x07)
+
+#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || \
+ ((PIN) == PWR_WAKEUP_PIN2) || \
+ ((PIN) == PWR_WAKEUP_PIN3) || \
+ ((PIN) == PWR_WAKEUP_PIN4) || \
+ ((PIN) == PWR_WAKEUP_PIN5) || \
+ ((PIN) == PWR_WAKEUP_PIN6) || \
+ ((PIN) == PWR_WAKEUP_PIN7) || \
+ ((PIN) == PWR_WAKEUP_PIN8))
+#else
+#define PWR_WAKEUP_PIN1 ((uint32_t)0x00)
+#define PWR_WAKEUP_PIN2 ((uint32_t)0x01)
+
+#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || \
+ ((PIN) == PWR_WAKEUP_PIN2))
+#endif /* defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || */
+ /* defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */
+/**
+ * @}
+ */
+
+/** @defgroup PWREx_EXTI_Line PWREx EXTI Line
+ * @{
+ */
+#if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || \
+ defined (STM32F091xC)
+
+#define PWR_EXTI_LINE_PVD ((uint32_t)0x00010000) /*!< External interrupt line 16 Connected to the PVD EXTI Line */
+
+#endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */
+ /* defined (STM32F071xB) || defined (STM32F072xB) || */
+ /* defined (STM32F091xC) */
+
+#if defined (STM32F042x6) || defined (STM32F048xx) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+ defined (STM32F091xC) || defined (STM32F098xx)
+
+#define PWR_EXTI_LINE_VDDIO2 ((uint32_t)0x80000000) /*!< External interrupt line 31 Connected to the Vddio2 Monitor EXTI Line */
+
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) ||\
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+ defined (STM32F091xC) || defined (STM32F098xx) ||*/
+/**
+ * @}
+ */
+
+#if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || \
+ defined (STM32F091xC)
+/** @defgroup PWREx_PVD_detection_level PWREx PVD detection level
+ * @{
+ */
+#define PWR_PVDLEVEL_0 PWR_CR_PLS_LEV0
+#define PWR_PVDLEVEL_1 PWR_CR_PLS_LEV1
+#define PWR_PVDLEVEL_2 PWR_CR_PLS_LEV2
+#define PWR_PVDLEVEL_3 PWR_CR_PLS_LEV3
+#define PWR_PVDLEVEL_4 PWR_CR_PLS_LEV4
+#define PWR_PVDLEVEL_5 PWR_CR_PLS_LEV5
+#define PWR_PVDLEVEL_6 PWR_CR_PLS_LEV6
+#define PWR_PVDLEVEL_7 PWR_CR_PLS_LEV7
+#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \
+ ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \
+ ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \
+ ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7))
+/**
+ * @}
+ */
+
+/** @defgroup PWREx_PVD_Mode PWREx PVD Mode
+ * @{
+ */
+#define PWR_PVD_MODE_NORMAL ((uint32_t)0x00000000) /*!< basic mode is used */
+#define PWR_PVD_MODE_IT_RISING ((uint32_t)0x00010001) /*!< External Interrupt Mode with Rising edge trigger detection */
+#define PWR_PVD_MODE_IT_FALLING ((uint32_t)0x00010002) /*!< External Interrupt Mode with Falling edge trigger detection */
+#define PWR_PVD_MODE_IT_RISING_FALLING ((uint32_t)0x00010003) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+#define PWR_PVD_MODE_EVENT_RISING ((uint32_t)0x00020001) /*!< Event Mode with Rising edge trigger detection */
+#define PWR_PVD_MODE_EVENT_FALLING ((uint32_t)0x00020002) /*!< Event Mode with Falling edge trigger detection */
+#define PWR_PVD_MODE_EVENT_RISING_FALLING ((uint32_t)0x00020003) /*!< Event Mode with Rising/Falling edge trigger detection */
+
+#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \
+ ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \
+ ((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \
+ ((MODE) == PWR_PVD_MODE_NORMAL))
+/**
+ * @}
+ */
+#endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */
+ /* defined (STM32F071xB) || defined (STM32F072xB) || */
+ /* defined (STM32F091xC) */
+
+/** @defgroup PWREx_Flag PWREx Flag
+ * @{
+ */
+#if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || \
+ defined (STM32F091xC)
+
+#define PWR_FLAG_WU PWR_CSR_WUF
+#define PWR_FLAG_SB PWR_CSR_SBF
+#define PWR_FLAG_PVDO PWR_CSR_PVDO
+#define PWR_FLAG_VREFINTRDY PWR_CSR_VREFINTRDYF
+#elif defined (STM32F070x6) || defined (STM32F070xB) || defined (STM32F030xC)
+#define PWR_FLAG_WU PWR_CSR_WUF
+#define PWR_FLAG_SB PWR_CSR_SBF
+#define PWR_FLAG_VREFINTRDY PWR_CSR_VREFINTRDYF
+#else
+#define PWR_FLAG_WU PWR_CSR_WUF
+#define PWR_FLAG_SB PWR_CSR_SBF
+
+#endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */
+ /* defined (STM32F071xB) || defined (STM32F072xB) || */
+ /* defined (STM32F091xC) */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PWREx_Exported_Macros PWREx Exported Macros
+ * @{
+ */
+#if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || \
+ defined (STM32F091xC)
+/**
+ * @brief Enable interrupt on PVD Exti Line 16.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_IT() (EXTI->IMR |= (PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Disable interrupt on PVD Exti Line 16.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_IT() (EXTI->IMR &= ~(PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Enable event on PVD Exti Line 16.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() (EXTI->EMR |= (PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Disable event on PVD Exti Line 16.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief PVD EXTI line configuration: clear falling edge and rising edge trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_CLEAR_EGDE_TRIGGER() EXTI->FTSR &= ~(PWR_EXTI_LINE_PVD); \
+ EXTI->RTSR &= ~(PWR_EXTI_LINE_PVD)
+
+/**
+ * @brief PVD EXTI line configuration: set falling edge trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_SET_FALLING_EGDE_TRIGGER() EXTI->FTSR |= (PWR_EXTI_LINE_PVD)
+
+/**
+ * @brief PVD EXTI line configuration: set rising edge trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_SET_RISING_EDGE_TRIGGER() EXTI->RTSR |= (PWR_EXTI_LINE_PVD)
+
+/**
+ * @brief Check whether the specified PVD EXTI interrupt flag is set or not.
+ * @retval EXTI PVD Line Status.
+ */
+#define __HAL_PWR_PVD_EXTI_GET_FLAG() (EXTI->PR & (PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Clear the PVD EXTI flag.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() (EXTI->PR = (PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Generate a Software interrupt on selected EXTI line.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() (EXTI->SWIER |= (PWR_EXTI_LINE_PVD))
+
+#endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */
+ /* defined (STM32F071xB) || defined (STM32F072xB) || */
+ /* defined (STM32F091xC) */
+
+
+#if defined (STM32F042x6) || defined (STM32F048xx) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+ defined (STM32F091xC) || defined (STM32F098xx)
+/**
+ * @brief Enable interrupt on Vddio2 Monitor Exti Line 31.
+ * @retval None.
+ */
+#define __HAL_PWR_VDDIO2_EXTI_ENABLE_IT() (EXTI->IMR |= (PWR_EXTI_LINE_VDDIO2))
+
+/**
+ * @brief Disable interrupt on Vddio2 Monitor Exti Line 31.
+ * @retval None.
+ */
+#define __HAL_PWR_VDDIO2_EXTI_DISABLE_IT() (EXTI->IMR &= ~(PWR_EXTI_LINE_VDDIO2))
+
+/**
+ * @brief Vddio2 Monitor EXTI line configuration: clear falling edge and rising edge trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_VDDIO2_EXTI_CLEAR_EGDE_TRIGGER() EXTI->FTSR &= ~(PWR_EXTI_LINE_VDDIO2); \
+ EXTI->RTSR &= ~(PWR_EXTI_LINE_VDDIO2)
+
+/**
+ * @brief Vddio2 Monitor EXTI line configuration: set falling edge trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_VDDIO2_EXTI_SET_FALLING_EGDE_TRIGGER() EXTI->FTSR |= (PWR_EXTI_LINE_VDDIO2)
+
+/**
+ * @brief Check whether the specified VDDIO2 monitor EXTI interrupt flag is set or not.
+ * @retval EXTI VDDIO2 Monitor Line Status.
+ */
+#define __HAL_PWR_VDDIO2_EXTI_GET_FLAG() (EXTI->PR & (PWR_EXTI_LINE_VDDIO2))
+
+/**
+ * @brief Clear the VDDIO2 Monitor EXTI flag.
+ * @retval None.
+ */
+#define __HAL_PWR_VDDIO2_EXTI_CLEAR_FLAG() (EXTI->PR = (PWR_EXTI_LINE_VDDIO2))
+
+/**
+ * @brief Generate a Software interrupt on selected EXTI line.
+ * @retval None.
+ */
+#define __HAL_PWR_VDDIO2_EXTI_GENERATE_SWIT() (EXTI->SWIER |= (PWR_EXTI_LINE_VDDIO2))
+
+
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) ||\
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+ defined (STM32F091xC) || defined (STM32F098xx) */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup PWREx_Exported_Functions PWREx Exported Functions
+ * @{
+ */
+
+/** @addtogroup PWREx_Exported_Functions_Group1
+ * @{
+ */
+/* I/O operation functions ***************************************************/
+#if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || \
+ defined (STM32F091xC)
+void HAL_PWR_PVD_IRQHandler(void);
+void HAL_PWR_PVDCallback(void);
+#endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */
+ /* defined (STM32F071xB) || defined (STM32F072xB) || */
+ /* defined (STM32F091xC) */
+
+#if defined (STM32F042x6) || defined (STM32F048xx) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+ defined (STM32F091xC) || defined (STM32F098xx)
+void HAL_PWR_Vddio2Monitor_IRQHandler(void);
+void HAL_PWR_Vddio2MonitorCallback(void);
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+ defined (STM32F091xC) || defined (STM32F098xx) */
+
+/* Peripheral Control functions **********************************************/
+#if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || \
+ defined (STM32F091xC)
+void HAL_PWR_PVDConfig(PWR_PVDTypeDef *sConfigPVD);
+void HAL_PWR_EnablePVD(void);
+void HAL_PWR_DisablePVD(void);
+#endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */
+ /* defined (STM32F071xB) || defined (STM32F072xB) || */
+ /* defined (STM32F091xC) */
+
+#if defined (STM32F042x6) || defined (STM32F048xx) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+ defined (STM32F091xC) || defined (STM32F098xx)
+void HAL_PWR_EnableVddio2Monitor(void);
+void HAL_PWR_DisableVddio2Monitor(void);
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+ defined (STM32F091xC) || defined (STM32F098xx) */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_PWR_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
+
diff --git a/f0/include/stm32f0xx_hal_rcc.h b/f0/include/stm32f0xx_hal_rcc.h
new file mode 100755
index 0000000000000000000000000000000000000000..d9ed5c7cc89f0c59f71c04787b000d9fd42bd57a
--- /dev/null
+++ b/f0/include/stm32f0xx_hal_rcc.h
@@ -0,0 +1,1256 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_rcc.h
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief Header file of RCC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_RCC_H
+#define __STM32F0xx_HAL_RCC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RCC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup RCC_Exported_Types RCC Exported Types
+ * @{
+ */
+
+/**
+ * @brief RCC PLL configuration structure definition
+ */
+typedef struct
+{
+ uint32_t PLLState; /*!< PLLState: The new state of the PLL.
+ This parameter can be a value of @ref RCC_PLL_Config */
+
+ uint32_t PLLSource; /*!< PLLSource: PLL entry clock source.
+ This parameter must be a value of @ref RCC_PLL_Clock_Source */
+
+ uint32_t PREDIV; /*!< PREDIV: Predivision factor for PLL VCO input clock
+ This parameter must be a value of @ref RCC_PLL_Prediv_Factor */
+
+ uint32_t PLLMUL; /*!< PLLMUL: Multiplication factor for PLL VCO input clock
+ This parameter must be a value of @ref RCC_PLL_Multiplication_Factor */
+
+}RCC_PLLInitTypeDef;
+
+/**
+ * @brief RCC Internal/External Oscillator (HSE, HSI, LSE and LSI) configuration structure definition
+ */
+typedef struct
+{
+ uint32_t OscillatorType; /*!< The Oscillators to be configured.
+ This parameter can be a value of @ref RCC_Oscillator_Type */
+
+ uint32_t HSEState; /*!< The new state of the HSE.
+ This parameter can be a value of @ref RCC_HSE_Config */
+
+ uint32_t LSEState; /*!< The new state of the LSE.
+ This parameter can be a value of @ref RCC_LSE_Config */
+
+ uint32_t HSIState; /*!< The new state of the HSI.
+ This parameter can be a value of @ref RCC_HSI_Config */
+
+ uint32_t HSICalibrationValue; /*!< The HSI calibration trimming value (default is RCC_HSICALIBRATION_DEFAULT).
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F */
+
+ uint32_t HSI14State; /*!< The new state of the HSI14.
+ This parameter can be a value of @ref RCC_HSI14_Config */
+
+ uint32_t HSI14CalibrationValue; /*!< The HSI14 calibration trimming value (default is RCC_HSI14CALIBRATION_DEFAULT).
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F */
+
+ uint32_t HSI48State; /*!< The new state of the HSI48 (only applicable to STM32F07x, STM32F0x2 and STM32F09x devices).
+ This parameter can be a value of @ref RCCEx_HSI48_Config */
+
+ uint32_t LSIState; /*!< The new state of the LSI.
+ This parameter can be a value of @ref RCC_LSI_Config */
+
+ RCC_PLLInitTypeDef PLL; /*!< PLL structure parameters */
+
+}RCC_OscInitTypeDef;
+
+/**
+ * @brief RCC System, AHB and APB busses clock configuration structure definition
+ */
+typedef struct
+{
+ uint32_t ClockType; /*!< The clock to be configured.
+ This parameter can be a value of @ref RCC_System_Clock_Type */
+
+ uint32_t SYSCLKSource; /*!< The clock source (SYSCLKS) used as system clock.
+ This parameter can be a value of @ref RCC_System_Clock_Source */
+
+ uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK).
+ This parameter can be a value of @ref RCC_AHB_Clock_Source */
+
+ uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK).
+ This parameter can be a value of @ref RCC_APB1_Clock_Source */
+
+}RCC_ClkInitTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RCC_Exported_Constants RCC Exported Constants
+ * @{
+ */
+
+/** @defgroup RCC_BitAddress_AliasRegion RCC BitAddress AliasRegion
+ * @brief RCC registers bit address in the alias region
+ * @{
+ */
+#define RCC_OFFSET (RCC_BASE - PERIPH_BASE)
+/* --- CR Register ---*/
+#define RCC_CR_OFFSET (RCC_OFFSET + 0x00)
+/* --- CFGR Register ---*/
+#define RCC_CFGR_OFFSET (RCC_OFFSET + 0x04)
+/* --- CIR Register ---*/
+#define RCC_CIR_OFFSET (RCC_OFFSET + 0x08)
+/* --- BDCR Register ---*/
+#define RCC_BDCR_OFFSET (RCC_OFFSET + 0x20)
+/* --- CSR Register ---*/
+#define RCC_CSR_OFFSET (RCC_OFFSET + 0x24)
+/* --- CR2 Register ---*/
+#define RCC_CR2_OFFSET (RCC_OFFSET + 0x34)
+
+/* CR register byte 2 (Bits[23:16]) base address */
+#define RCC_CR_BYTE2_ADDRESS (PERIPH_BASE + RCC_CR_OFFSET + 0x02)
+
+/* CIR register byte 1 (Bits[15:8]) base address */
+#define RCC_CIR_BYTE1_ADDRESS (PERIPH_BASE + RCC_CIR_OFFSET + 0x01)
+
+/* CIR register byte 2 (Bits[23:16]) base address */
+#define RCC_CIR_BYTE2_ADDRESS (PERIPH_BASE + RCC_CIR_OFFSET + 0x02)
+
+/* CSR register byte 1 (Bits[15:8]) base address */
+#define RCC_CSR_BYTE1_ADDRESS (PERIPH_BASE + RCC_CSR_OFFSET + 0x01)
+
+/* BDCR register byte 0 (Bits[7:0] base address */
+#define RCC_BDCR_BYTE0_ADDRESS (PERIPH_BASE + RCC_BDCR_OFFSET)
+
+#define RCC_CFGR_PLLMUL_BITNUMBER 18
+#define RCC_CFGR2_PREDIV_BITNUMBER 0
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Timeout RCC Timeout
+ * @{
+ */
+/* LSE state change timeout */
+#define LSE_TIMEOUT_VALUE ((uint32_t)5000) /* 5 s */
+
+/* Disable Backup domain write protection state change timeout */
+#define DBP_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Oscillator_Type RCC Oscillator Type
+ * @{
+ */
+#define RCC_OSCILLATORTYPE_NONE ((uint32_t)0x00000000)
+#define RCC_OSCILLATORTYPE_HSE ((uint32_t)0x00000001)
+#define RCC_OSCILLATORTYPE_HSI ((uint32_t)0x00000002)
+#define RCC_OSCILLATORTYPE_LSE ((uint32_t)0x00000004)
+#define RCC_OSCILLATORTYPE_LSI ((uint32_t)0x00000008)
+#define RCC_OSCILLATORTYPE_HSI14 ((uint32_t)0x00000010)
+#define RCC_OSCILLATORTYPE_HSI48 ((uint32_t)0x00000020)
+
+#define IS_RCC_OSCILLATORTYPE(OSCILLATOR) (((OSCILLATOR) == RCC_OSCILLATORTYPE_NONE) || \
+ (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) || \
+ (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) || \
+ (((OSCILLATOR) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) || \
+ (((OSCILLATOR) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE) || \
+ (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSI14) == RCC_OSCILLATORTYPE_HSI14) || \
+ (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSI48) == RCC_OSCILLATORTYPE_HSI48))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSE_Config RCC HSE Config
+ * @{
+ */
+#define RCC_HSE_OFF ((uint8_t)0x00)
+#define RCC_HSE_ON ((uint8_t)0x01)
+#define RCC_HSE_BYPASS ((uint8_t)0x05)
+
+#define IS_RCC_HSE(HSE) (((HSE) == RCC_HSE_OFF) || ((HSE) == RCC_HSE_ON) || \
+ ((HSE) == RCC_HSE_BYPASS))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSE_Config RCC_LSE_Config
+ * @{
+ */
+#define RCC_LSE_OFF ((uint8_t)0x00)
+#define RCC_LSE_ON ((uint8_t)0x01)
+#define RCC_LSE_BYPASS ((uint8_t)0x05)
+
+#define IS_RCC_LSE(LSE) (((LSE) == RCC_LSE_OFF) || ((LSE) == RCC_LSE_ON) || \
+ ((LSE) == RCC_LSE_BYPASS))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSI_Config RCC HSI Config
+ * @{
+ */
+#define RCC_HSI_OFF ((uint8_t)0x00)
+#define RCC_HSI_ON ((uint8_t)0x01)
+
+#define IS_RCC_HSI(HSI) (((HSI) == RCC_HSI_OFF) || ((HSI) == RCC_HSI_ON))
+
+#define RCC_HSICALIBRATION_DEFAULT ((uint32_t)0x10) /* Default HSI calibration trimming value */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSI14_Config RCC HSI14 Config
+ * @{
+ */
+#define RCC_HSI14_OFF ((uint32_t)0x00)
+#define RCC_HSI14_ON RCC_CR2_HSI14ON
+#define RCC_HSI14_ADC_CONTROL (~RCC_CR2_HSI14DIS)
+
+#define IS_RCC_HSI14(HSI14) (((HSI14) == RCC_HSI14_OFF) || ((HSI14) == RCC_HSI14_ON) || ((HSI14) == RCC_HSI14_ADC_CONTROL))
+
+#define RCC_HSI14CALIBRATION_DEFAULT ((uint32_t)0x10) /* Default HSI14 calibration trimming value */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSI_Config RCC LSI Config
+ * @{
+ */
+#define RCC_LSI_OFF ((uint8_t)0x00)
+#define RCC_LSI_ON ((uint8_t)0x01)
+
+#define IS_RCC_LSI(LSI) (((LSI) == RCC_LSI_OFF) || ((LSI) == RCC_LSI_ON))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLL_Config RCC PLL Config
+ * @{
+ */
+#define RCC_PLL_NONE ((uint8_t)0x00)
+#define RCC_PLL_OFF ((uint8_t)0x01)
+#define RCC_PLL_ON ((uint8_t)0x02)
+
+#define IS_RCC_PLL(PLL) (((PLL) == RCC_PLL_NONE) ||((PLL) == RCC_PLL_OFF) || ((PLL) == RCC_PLL_ON))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLL_Prediv_Factor RCC PLL Prediv Factor
+ * @{
+ */
+#define RCC_PREDIV_DIV1 RCC_CFGR2_PREDIV_DIV1
+#define RCC_PREDIV_DIV2 RCC_CFGR2_PREDIV_DIV2
+#define RCC_PREDIV_DIV3 RCC_CFGR2_PREDIV_DIV3
+#define RCC_PREDIV_DIV4 RCC_CFGR2_PREDIV_DIV4
+#define RCC_PREDIV_DIV5 RCC_CFGR2_PREDIV_DIV5
+#define RCC_PREDIV_DIV6 RCC_CFGR2_PREDIV_DIV6
+#define RCC_PREDIV_DIV7 RCC_CFGR2_PREDIV_DIV7
+#define RCC_PREDIV_DIV8 RCC_CFGR2_PREDIV_DIV8
+#define RCC_PREDIV_DIV9 RCC_CFGR2_PREDIV_DIV9
+#define RCC_PREDIV_DIV10 RCC_CFGR2_PREDIV_DIV10
+#define RCC_PREDIV_DIV11 RCC_CFGR2_PREDIV_DIV11
+#define RCC_PREDIV_DIV12 RCC_CFGR2_PREDIV_DIV12
+#define RCC_PREDIV_DIV13 RCC_CFGR2_PREDIV_DIV13
+#define RCC_PREDIV_DIV14 RCC_CFGR2_PREDIV_DIV14
+#define RCC_PREDIV_DIV15 RCC_CFGR2_PREDIV_DIV15
+#define RCC_PREDIV_DIV16 RCC_CFGR2_PREDIV_DIV16
+
+#define IS_RCC_PREDIV(PREDIV) (((PREDIV) == RCC_PREDIV_DIV1) || ((PREDIV) == RCC_PREDIV_DIV2) || \
+ ((PREDIV) == RCC_PREDIV_DIV3) || ((PREDIV) == RCC_PREDIV_DIV4) || \
+ ((PREDIV) == RCC_PREDIV_DIV5) || ((PREDIV) == RCC_PREDIV_DIV6) || \
+ ((PREDIV) == RCC_PREDIV_DIV7) || ((PREDIV) == RCC_PREDIV_DIV8) || \
+ ((PREDIV) == RCC_PREDIV_DIV9) || ((PREDIV) == RCC_PREDIV_DIV10) || \
+ ((PREDIV) == RCC_PREDIV_DIV11) || ((PREDIV) == RCC_PREDIV_DIV12) || \
+ ((PREDIV) == RCC_PREDIV_DIV13) || ((PREDIV) == RCC_PREDIV_DIV14) || \
+ ((PREDIV) == RCC_PREDIV_DIV15) || ((PREDIV) == RCC_PREDIV_DIV16))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLL_Multiplication_Factor RCC PLL Multiplication Factor
+ * @{
+ */
+#define RCC_PLL_MUL2 RCC_CFGR_PLLMUL2
+#define RCC_PLL_MUL3 RCC_CFGR_PLLMUL3
+#define RCC_PLL_MUL4 RCC_CFGR_PLLMUL4
+#define RCC_PLL_MUL5 RCC_CFGR_PLLMUL5
+#define RCC_PLL_MUL6 RCC_CFGR_PLLMUL6
+#define RCC_PLL_MUL7 RCC_CFGR_PLLMUL7
+#define RCC_PLL_MUL8 RCC_CFGR_PLLMUL8
+#define RCC_PLL_MUL9 RCC_CFGR_PLLMUL9
+#define RCC_PLL_MUL10 RCC_CFGR_PLLMUL10
+#define RCC_PLL_MUL11 RCC_CFGR_PLLMUL11
+#define RCC_PLL_MUL12 RCC_CFGR_PLLMUL12
+#define RCC_PLL_MUL13 RCC_CFGR_PLLMUL13
+#define RCC_PLL_MUL14 RCC_CFGR_PLLMUL14
+#define RCC_PLL_MUL15 RCC_CFGR_PLLMUL15
+#define RCC_PLL_MUL16 RCC_CFGR_PLLMUL16
+
+#define IS_RCC_PLL_MUL(MUL) (((MUL) == RCC_PLL_MUL2) || ((MUL) == RCC_PLL_MUL3) || \
+ ((MUL) == RCC_PLL_MUL4) || ((MUL) == RCC_PLL_MUL5) || \
+ ((MUL) == RCC_PLL_MUL6) || ((MUL) == RCC_PLL_MUL7) || \
+ ((MUL) == RCC_PLL_MUL8) || ((MUL) == RCC_PLL_MUL9) || \
+ ((MUL) == RCC_PLL_MUL10) || ((MUL) == RCC_PLL_MUL11) || \
+ ((MUL) == RCC_PLL_MUL12) || ((MUL) == RCC_PLL_MUL13) || \
+ ((MUL) == RCC_PLL_MUL14) || ((MUL) == RCC_PLL_MUL15) || \
+ ((MUL) == RCC_PLL_MUL16))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLL_Clock_Source RCC PLL Clock Source
+ * @{
+ */
+#define RCC_PLLSOURCE_HSE RCC_CFGR_PLLSRC_HSE_PREDIV
+/**
+ * @}
+ */
+
+/** @defgroup RCC_System_Clock_Type RCC System Clock Type
+ * @{
+ */
+#define RCC_CLOCKTYPE_SYSCLK ((uint32_t)0x00000001)
+#define RCC_CLOCKTYPE_HCLK ((uint32_t)0x00000002)
+#define RCC_CLOCKTYPE_PCLK1 ((uint32_t)0x00000004)
+
+#define IS_RCC_CLOCKTYPE(CLK) ((((CLK) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK) || \
+ (((CLK) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) || \
+ (((CLK) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_System_Clock_Source RCC System Clock Source
+ * @{
+ */
+#define RCC_SYSCLKSOURCE_HSI RCC_CFGR_SW_HSI
+#define RCC_SYSCLKSOURCE_HSE RCC_CFGR_SW_HSE
+#define RCC_SYSCLKSOURCE_PLLCLK RCC_CFGR_SW_PLL
+/**
+ * @}
+ */
+
+/** @defgroup RCC_System_Clock_Source_Status RCC System Clock Source Status
+ * @{
+ */
+#define RCC_SYSCLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI
+#define RCC_SYSCLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE
+#define RCC_SYSCLKSOURCE_STATUS_PLLCLK RCC_CFGR_SWS_PLL
+/**
+ * @}
+ */
+
+/** @defgroup RCC_AHB_Clock_Source RCC AHB Clock Source
+ * @{
+ */
+#define RCC_SYSCLK_DIV1 RCC_CFGR_HPRE_DIV1
+#define RCC_SYSCLK_DIV2 RCC_CFGR_HPRE_DIV2
+#define RCC_SYSCLK_DIV4 RCC_CFGR_HPRE_DIV4
+#define RCC_SYSCLK_DIV8 RCC_CFGR_HPRE_DIV8
+#define RCC_SYSCLK_DIV16 RCC_CFGR_HPRE_DIV16
+#define RCC_SYSCLK_DIV64 RCC_CFGR_HPRE_DIV64
+#define RCC_SYSCLK_DIV128 RCC_CFGR_HPRE_DIV128
+#define RCC_SYSCLK_DIV256 RCC_CFGR_HPRE_DIV256
+#define RCC_SYSCLK_DIV512 RCC_CFGR_HPRE_DIV512
+
+#define IS_RCC_SYSCLK_DIV(DIV) (((DIV) == RCC_SYSCLK_DIV1) || ((DIV) == RCC_SYSCLK_DIV2) || \
+ ((DIV) == RCC_SYSCLK_DIV4) || ((DIV) == RCC_SYSCLK_DIV8) || \
+ ((DIV) == RCC_SYSCLK_DIV16) || ((DIV) == RCC_SYSCLK_DIV64) || \
+ ((DIV) == RCC_SYSCLK_DIV128) || ((DIV) == RCC_SYSCLK_DIV256) || \
+ ((DIV) == RCC_SYSCLK_DIV512))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_Clock_Source RCC APB1 Clock Source
+ * @{
+ */
+#define RCC_HCLK_DIV1 RCC_CFGR_PPRE_DIV1
+#define RCC_HCLK_DIV2 RCC_CFGR_PPRE_DIV2
+#define RCC_HCLK_DIV4 RCC_CFGR_PPRE_DIV4
+#define RCC_HCLK_DIV8 RCC_CFGR_PPRE_DIV8
+#define RCC_HCLK_DIV16 RCC_CFGR_PPRE_DIV16
+
+#define IS_RCC_HCLK_DIV(DIV) (((DIV) == RCC_HCLK_DIV1) || ((DIV) == RCC_HCLK_DIV2) || \
+ ((DIV) == RCC_HCLK_DIV4) || ((DIV) == RCC_HCLK_DIV8) || \
+ ((DIV) == RCC_HCLK_DIV16))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_RTC_Clock_Source RCC RTC Clock Source
+ * @{
+ */
+#define RCC_RTCCLKSOURCE_NONE RCC_BDCR_RTCSEL_NOCLOCK
+#define RCC_RTCCLKSOURCE_LSE RCC_BDCR_RTCSEL_LSE
+#define RCC_RTCCLKSOURCE_LSI RCC_BDCR_RTCSEL_LSI
+#define RCC_RTCCLKSOURCE_HSE_DIV32 RCC_BDCR_RTCSEL_HSE
+
+#define IS_RCC_RTCCLKSOURCE(SOURCE) (((SOURCE) == RCC_RTCCLKSOURCE_NONE) || \
+ ((SOURCE) == RCC_RTCCLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_RTCCLKSOURCE_LSI) || \
+ ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV32))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_USART1_Clock_Source RCC USART1 Clock Source
+ * @{
+ */
+#define RCC_USART1CLKSOURCE_PCLK1 RCC_CFGR3_USART1SW_PCLK
+#define RCC_USART1CLKSOURCE_SYSCLK RCC_CFGR3_USART1SW_SYSCLK
+#define RCC_USART1CLKSOURCE_LSE RCC_CFGR3_USART1SW_LSE
+#define RCC_USART1CLKSOURCE_HSI RCC_CFGR3_USART1SW_HSI
+
+#define IS_RCC_USART1CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART1CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_HSI))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_I2C1_Clock_Source RCC I2C1 Clock Source
+ * @{
+ */
+#define RCC_I2C1CLKSOURCE_HSI RCC_CFGR3_I2C1SW_HSI
+#define RCC_I2C1CLKSOURCE_SYSCLK RCC_CFGR3_I2C1SW_SYSCLK
+
+#define IS_RCC_I2C1CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C1CLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_I2C1CLKSOURCE_SYSCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_MCOx_Index RCC MCOx Index
+ * @{
+ */
+#define RCC_MCO ((uint32_t)0x00000000)
+
+#define IS_RCC_MCO(MCOx) ((MCOx) == RCC_MCO)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_MCO_Clock_Source RCC MCO Clock Source
+ * @{
+ */
+#define RCC_MCOSOURCE_NONE RCC_CFGR_MCO_NOCLOCK
+#define RCC_MCOSOURCE_LSI RCC_CFGR_MCO_LSI
+#define RCC_MCOSOURCE_LSE RCC_CFGR_MCO_LSE
+#define RCC_MCOSOURCE_SYSCLK RCC_CFGR_MCO_SYSCLK
+#define RCC_MCOSOURCE_HSI RCC_CFGR_MCO_HSI
+#define RCC_MCOSOURCE_HSE RCC_CFGR_MCO_HSE
+#define RCC_MCOSOURCE_PLLCLK_DIV2 RCC_CFGR_MCO_PLL
+#define RCC_MCOSOURCE_HSI14 RCC_CFGR_MCO_HSI14
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Interrupt RCC Interrupt
+ * @{
+ */
+#define RCC_IT_LSIRDY ((uint8_t)0x01)
+#define RCC_IT_LSERDY ((uint8_t)0x02)
+#define RCC_IT_HSIRDY ((uint8_t)0x04)
+#define RCC_IT_HSERDY ((uint8_t)0x08)
+#define RCC_IT_PLLRDY ((uint8_t)0x10)
+#define RCC_IT_HSI14 ((uint8_t)0x20)
+#define RCC_IT_CSS ((uint8_t)0x80)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Flag RCC Flag
+ * Elements values convention: 0XXYYYYYb
+ * - YYYYY : Flag position in the register
+ * - XX : Register index
+ * - 00: CR register
+ * - 01: CR2 register
+ * - 10: BDCR register
+ * - 11: CSR register
+ * @{
+ */
+#define CR_REG_INDEX 0
+#define CR2_REG_INDEX 1
+#define BDCR_REG_INDEX 2
+#define CSR_REG_INDEX 3
+
+/* Flags in the CR register */
+#define RCC_CR_HSIRDY_BitNumber 1
+#define RCC_CR_HSERDY_BitNumber 17
+#define RCC_CR_PLLRDY_BitNumber 25
+
+#define RCC_FLAG_HSIRDY ((uint8_t)((CR_REG_INDEX << 5) | RCC_CR_HSIRDY_BitNumber))
+#define RCC_FLAG_HSERDY ((uint8_t)((CR_REG_INDEX << 5) | RCC_CR_HSERDY_BitNumber))
+#define RCC_FLAG_PLLRDY ((uint8_t)((CR_REG_INDEX << 5) | RCC_CR_PLLRDY_BitNumber))
+
+/* Flags in the CR2 register */
+#define RCC_CR2_HSI14RDY_BitNumber 1
+
+#define RCC_FLAG_HSI14RDY ((uint8_t)((CR2_REG_INDEX << 5) | RCC_CR2_HSI14RDY_BitNumber))
+
+/* Flags in the BDCR register */
+#define RCC_BDCR_LSERDY_BitNumber 1
+
+#define RCC_FLAG_LSERDY ((uint8_t)((BDCR_REG_INDEX << 5) | RCC_BDCR_LSERDY_BitNumber))
+
+/* Flags in the CSR register */
+#define RCC_CSR_LSIRDY_BitNumber 1
+#define RCC_CSR_V18PWRRSTF_BitNumber 23
+#define RCC_CSR_RMVF_BitNumber 24
+#define RCC_CSR_OBLRSTF_BitNumber 25
+#define RCC_CSR_PINRSTF_BitNumber 26
+#define RCC_CSR_PORRSTF_BitNumber 27
+#define RCC_CSR_SFTRSTF_BitNumber 28
+#define RCC_CSR_IWDGRSTF_BitNumber 29
+#define RCC_CSR_WWDGRSTF_BitNumber 30
+#define RCC_CSR_LPWRRSTF_BitNumber 31
+
+#define RCC_FLAG_LSIRDY ((uint8_t)((CSR_REG_INDEX << 5) | RCC_CSR_LSIRDY_BitNumber))
+#define RCC_FLAG_V18PWRRST ((uint8_t)((CSR_REG_INDEX << 5) | RCC_CSR_LSIRDY_BitNumber))
+#define RCC_FLAG_RMV ((uint8_t)((CSR_REG_INDEX << 5) | RCC_CSR_RMVF_BitNumber))
+#define RCC_FLAG_OBLRST ((uint8_t)((CSR_REG_INDEX << 5) | RCC_CSR_OBLRSTF_BitNumber))
+#define RCC_FLAG_PINRST ((uint8_t)((CSR_REG_INDEX << 5) | RCC_CSR_PINRSTF_BitNumber))
+#define RCC_FLAG_PORRST ((uint8_t)((CSR_REG_INDEX << 5) | RCC_CSR_PORRSTF_BitNumber))
+#define RCC_FLAG_SFTRST ((uint8_t)((CSR_REG_INDEX << 5) | RCC_CSR_SFTRSTF_BitNumber))
+#define RCC_FLAG_IWDGRST ((uint8_t)((CSR_REG_INDEX << 5) | RCC_CSR_IWDGRSTF_BitNumber))
+#define RCC_FLAG_WWDGRST ((uint8_t)((CSR_REG_INDEX << 5) | RCC_CSR_WWDGRSTF_BitNumber))
+#define RCC_FLAG_LPWRRST ((uint8_t)((CSR_REG_INDEX << 5) | RCC_CSR_LPWRRSTF_BitNumber))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Calibration_values RCC Calibration values
+ * @{
+ */
+#define IS_RCC_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x1F)
+
+/**
+ * @}
+ */
+
+/** @addtogroup RCC_Timeout
+ * @{
+ */
+
+#define HSE_TIMEOUT_VALUE HSE_STARTUP_TIMEOUT
+#define HSI_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */
+#define LSI_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */
+#define LSE_TIMEOUT_VALUE ((uint32_t)5000) /* 5 s */
+#define HSI14_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */
+#define HSI48_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */
+#define PLL_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */
+#define CLOCKSWITCH_TIMEOUT_VALUE ((uint32_t)5000) /* 5 s */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup RCC_Exported_Macros RCC Exported Macros
+ * @{
+ */
+
+/** @defgroup RCC_AHB_Clock_Enable_Disable RCC AHB Clock Enable Disable
+ * @brief Enable or disable the AHB peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __GPIOA_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_GPIOAEN))
+#define __GPIOB_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_GPIOBEN))
+#define __GPIOC_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_GPIOCEN))
+#define __GPIOF_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_GPIOFEN))
+#define __CRC_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_CRCEN))
+#define __DMA1_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_DMA1EN))
+#define __SRAM_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_SRAMEN))
+#define __FLITF_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_FLITFEN))
+
+#define __GPIOA_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOAEN))
+#define __GPIOB_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOBEN))
+#define __GPIOC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOCEN))
+#define __GPIOF_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOFEN))
+#define __CRC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_CRCEN))
+#define __DMA1_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_DMA1EN))
+#define __SRAM_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_SRAMEN))
+#define __FLITF_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_FLITFEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_Clock_Enable_Disable RCC APB1 Clock Enable Disable
+ * @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __TIM3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM3EN))
+#define __TIM14_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM14EN))
+#define __WWDG_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_WWDGEN))
+#define __I2C1_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_I2C1EN))
+#define __PWR_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_PWREN))
+
+#define __TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN))
+#define __TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN))
+#define __WWDG_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_WWDGEN))
+#define __I2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C1EN))
+#define __PWR_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_PWREN))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB2_Clock_Enable_Disable RCC APB2 Clock Enable Disable
+ * @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __SYSCFG_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SYSCFGEN))
+#define __ADC1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_ADC1EN))
+#define __TIM1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM1EN))
+#define __SPI1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SPI1EN))
+#define __TIM16_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM16EN))
+#define __TIM17_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM17EN))
+#define __USART1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_USART1EN))
+#define __DBGMCU_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_DBGMCUEN))
+
+#define __SYSCFG_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SYSCFGEN))
+#define __ADC1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC1EN))
+#define __TIM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM1EN))
+#define __SPI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI1EN))
+#define __TIM16_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM16EN))
+#define __TIM17_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM17EN))
+#define __USART1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART1EN))
+#define __DBGMCU_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_DBGMCUEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_AHB_Force_Release_Reset RCC AHB Force Release Reset
+ * @brief Force or release AHB peripheral reset.
+ * @{
+ */
+#define __AHB_FORCE_RESET() (RCC->AHBRSTR = 0xFFFFFFFF)
+#define __GPIOA_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOARST))
+#define __GPIOB_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOBRST))
+#define __GPIOC_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOCRST))
+#define __GPIOF_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOFRST))
+
+#define __AHB_RELEASE_RESET() (RCC->AHBRSTR = 0x00)
+#define __GPIOA_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOARST))
+#define __GPIOB_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOBRST))
+#define __GPIOC_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOCRST))
+#define __GPIOF_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOFRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_Force_Release_Reset RCC APB1 Force Release Reset
+ * @brief Force or release APB1 peripheral reset.
+ * @{
+ */
+#define __APB1_FORCE_RESET() (RCC->APB1RSTR = 0xFFFFFFFF)
+#define __TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
+#define __TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST))
+#define __WWDG_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_WWDGRST))
+#define __I2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C1RST))
+#define __PWR_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_PWRRST))
+
+#define __APB1_RELEASE_RESET() (RCC->APB1RSTR = 0x00)
+#define __TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST))
+#define __TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST))
+#define __WWDG_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_WWDGRST))
+#define __I2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C1RST))
+#define __PWR_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_PWRRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB2_Force_Release_Reset RCC APB2 Force Release Reset
+ * @brief Force or release APB2 peripheral reset.
+ * @{
+ */
+#define __APB2_FORCE_RESET() (RCC->APB2RSTR = 0xFFFFFFFF)
+#define __SYSCFG_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SYSCFGRST))
+#define __ADC1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_ADC1RST))
+#define __TIM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM1RST))
+#define __SPI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI1RST))
+#define __USART1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART1RST))
+#define __TIM16_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM16RST))
+#define __TIM17_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM17RST))
+#define __DBGMCU_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_DBGMCURST))
+
+#define __APB2_RELEASE_RESET() (RCC->APB2RSTR = 0x00)
+#define __SYSCFG_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SYSCFGRST))
+#define __ADC1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADC1RST))
+#define __TIM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM1RST))
+#define __SPI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI1RST))
+#define __USART1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART1RST))
+#define __TIM16_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM16RST))
+#define __TIM17_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM17RST))
+#define __DBGMCU_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_DBGMCURST))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSI_Configuration RCC HSI Configuration
+ * @{
+ */
+
+/** @brief Macros to enable or disable the Internal High Speed oscillator (HSI).
+ * @note The HSI is stopped by hardware when entering STOP and STANDBY modes.
+ * It is used (enabled by hardware) as system clock source after startup
+ * from Reset, wakeup from STOP and STANDBY mode, or in case of failure
+ * of the HSE used directly or indirectly as system clock (if the Clock
+ * Security System CSS is enabled).
+ * @note HSI can not be stopped if it is used as system clock source. In this case,
+ * you have to select another source of the system clock then stop the HSI.
+ * @note After enabling the HSI, the application software should wait on HSIRDY
+ * flag to be set indicating that HSI clock is stable and can be used as
+ * system clock source.
+ * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator
+ * clock cycles.
+ */
+#define __HAL_RCC_HSI_ENABLE() SET_BIT(RCC->CR, RCC_CR_HSION)
+#define __HAL_RCC_HSI_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_HSION)
+
+/** @brief Macro to adjust the Internal High Speed oscillator (HSI) calibration value.
+ * @note The calibration is used to compensate for the variations in voltage
+ * and temperature that influence the frequency of the internal HSI RC.
+ * @param __HSICalibrationValue__: specifies the calibration trimming value
+ * (default is RCC_HSICALIBRATION_DEFAULT).
+ * This parameter must be a number between 0 and 0x1F.
+ */
+#define RCC_CR_HSITRIM_BitNumber 3
+#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(__HSICalibrationValue__) \
+ MODIFY_REG(RCC->CR, RCC_CR_HSITRIM, (uint32_t)(__HSICalibrationValue__) << RCC_CR_HSITRIM_BitNumber)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSI_Configuration RCC LSI Configuration
+ * @{
+ */
+
+/** @brief Macro to enable or disable the Internal Low Speed oscillator (LSI).
+ * @note After enabling the LSI, the application software should wait on
+ * LSIRDY flag to be set indicating that LSI clock is stable and can
+ * be used to clock the IWDG and/or the RTC.
+ * @note LSI can not be disabled if the IWDG is running.
+ * @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator
+ * clock cycles.
+ */
+#define __HAL_RCC_LSI_ENABLE() SET_BIT(RCC->CSR, RCC_CSR_LSION)
+#define __HAL_RCC_LSI_DISABLE() CLEAR_BIT(RCC->CSR, RCC_CSR_LSION)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSE_Configuration RCC HSE Configuration
+ * @{
+ */
+
+/**
+ * @brief Macro to configure the External High Speed oscillator (HSE).
+ * @note After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application
+ * software should wait on HSERDY flag to be set indicating that HSE clock
+ * is stable and can be used to clock the PLL and/or system clock.
+ * @note HSE state can not be changed if it is used directly or through the
+ * PLL as system clock. In this case, you have to select another source
+ * of the system clock then change the HSE state (ex. disable it).
+ * @note The HSE is stopped by hardware when entering STOP and STANDBY modes.
+ * @note This function reset the CSSON bit, so if the Clock security system(CSS)
+ * was previously enabled you have to enable it again after calling this
+ * function.
+ * @param __STATE__: specifies the new state of the HSE.
+ * This parameter can be one of the following values:
+ * @arg RCC_HSE_OFF: turn OFF the HSE oscillator, HSERDY flag goes low after
+ * 6 HSE oscillator clock cycles.
+ * @arg RCC_HSE_ON: turn ON the HSE oscillator
+ * @arg RCC_HSE_BYPASS: HSE oscillator bypassed with external clock
+ */
+#define __HAL_RCC_HSE_CONFIG(__STATE__) (*(__IO uint8_t *)RCC_CR_BYTE2_ADDRESS = (__STATE__))
+
+/**
+ * @brief Macro to configure the External High Speed oscillator (HSE) Predivision factor for PLL.
+ * @note Predivision factor can not be changed if PLL is used as system clock
+ * In this case, you have to select another source of the system clock, disable the PLL and
+ * then change the HSE predivision factor.
+ * @param __HSEPredivValue__: specifies the division value applied to HSE.
+ * This parameter must be a number between RCC_HSE_PREDIV_DIV1 and RCC_HSE_PREDIV_DIV16.
+ */
+#define __HAL_RCC_HSE_PREDIV_CONFIG(__HSEPredivValue__) \
+ MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV, (uint32_t)(__HSEPredivValue__))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSE_Configuration RCC LSE Configuration
+ * @{
+ */
+/**
+ * @brief Macro to configure the External Low Speed oscillator (LSE).
+ * @note As the LSE is in the Backup domain and write access is denied to
+ * this domain after reset, you have to enable write access using
+ * HAL_PWR_EnableBkUpAccess() function before to configure the LSE
+ * (to be done once after reset).
+ * @note After enabling the LSE (RCC_LSE_ON or RCC_LSE_BYPASS), the application
+ * software should wait on LSERDY flag to be set indicating that LSE clock
+ * is stable and can be used to clock the RTC.
+ * @param __STATE__: specifies the new state of the LSE.
+ * This parameter can be one of the following values:
+ * @arg RCC_LSE_OFF: turn OFF the LSE oscillator, LSERDY flag goes low after
+ * 6 LSE oscillator clock cycles.
+ * @arg RCC_LSE_ON: turn ON the LSE oscillator
+ * @arg RCC_LSE_BYPASS: LSE oscillator bypassed with external clock
+ */
+#define __HAL_RCC_LSE_CONFIG(__STATE__) \
+ MODIFY_REG(RCC->BDCR, RCC_BDCR_LSEON|RCC_BDCR_LSEBYP, (uint32_t)(__STATE__))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSI14_Configuration RCC_HSI14_Configuration
+ * @{
+ */
+
+/** @brief Macros to enable or disable the Internal 14Mhz High Speed oscillator (HSI14).
+ * @note The HSI14 is stopped by hardware when entering STOP and STANDBY modes.
+ * @note HSI14 can not be stopped if it is used as system clock source. In this case,
+ * you have to select another source of the system clock then stop the HSI14.
+ * @note After enabling the HSI14 with __HAL_RCC_HSI14_ENABLE(), the application software
+ * should wait on HSI14RDY flag to be set indicating that HSI clock is stable and can be
+ * used as system clock source. This is not necessary if HAL_RCC_OscConfig() is used.
+ * @note When the HSI14 is stopped, HSI14RDY flag goes low after 6 HSI14 oscillator
+ * clock cycles.
+ */
+#define __HAL_RCC_HSI14_ENABLE() SET_BIT(RCC->CR2, RCC_CR2_HSI14ON)
+#define __HAL_RCC_HSI14_DISABLE() CLEAR_BIT(RCC->CR2, RCC_CR2_HSI14ON)
+
+/** @brief macros to Enable or Disable the Internal 14Mhz High Speed oscillator (HSI14) usage by ADC.
+ */
+#define __HAL_RCC_HSI14ADC_ENABLE() CLEAR_BIT(RCC->CR2, RCC_CR2_HSI14DIS)
+#define __HAL_RCC_HSI14ADC_DISABLE() SET_BIT(RCC->CR2, RCC_CR2_HSI14DIS)
+
+/** @brief Macro to adjust the Internal 14Mhz High Speed oscillator (HSI) calibration value.
+ * @note The calibration is used to compensate for the variations in voltage
+ * and temperature that influence the frequency of the internal HSI14 RC.
+ * @param __HSI14CalibrationValue__: specifies the calibration trimming value
+ * (default is RCC_HSI14CALIBRATION_DEFAULT).
+ * This parameter must be a number between 0 and 0x1F.
+ */
+#define RCC_CR2_HSI14TRIM_BitNumber 3
+#define __HAL_RCC_HSI14_CALIBRATIONVALUE_ADJUST(__HSI14CalibrationValue__) \
+ MODIFY_REG(RCC->CR2, RCC_CR2_HSI14TRIM, (uint32_t)(__HSI14CalibrationValue__) << RCC_CR2_HSI14TRIM_BitNumber)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_USARTx_Clock_Config RCC USARTx Clock Config
+ * @{
+ */
+
+/** @brief Macro to configure the USART1 clock (USART1CLK).
+ * @param __USART1CLKSource__: specifies the USART1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_USART1CLKSOURCE_PCLK1: PCLK1 selected as USART1 clock
+ * @arg RCC_USART1CLKSOURCE_HSI: HSI selected as USART1 clock
+ * @arg RCC_USART1CLKSOURCE_SYSCLK: System Clock selected as USART1 clock
+ * @arg RCC_USART1CLKSOURCE_LSE: LSE selected as USART1 clock
+ */
+#define __HAL_RCC_USART1_CONFIG(__USART1CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USART1SW, (uint32_t)(__USART1CLKSource__))
+
+/** @brief Macro to get the USART1 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_USART1CLKSOURCE_PCLK1: PCLK1 selected as USART1 clock
+ * @arg RCC_USART1CLKSOURCE_HSI: HSI selected as USART1 clock
+ * @arg RCC_USART1CLKSOURCE_SYSCLK: System Clock selected as USART1 clock
+ * @arg RCC_USART1CLKSOURCE_LSE: LSE selected as USART1 clock
+ */
+#define __HAL_RCC_GET_USART1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USART1SW)))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_I2Cx_Clock_Config RCC I2Cx Clock Config
+ * @{
+ */
+
+/** @brief Macro to configure the I2C1 clock (I2C1CLK).
+ * @param __I2C1CLKSource__: specifies the I2C1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2C1CLKSOURCE_HSI: HSI selected as I2C1 clock
+ * @arg RCC_I2C1CLKSOURCE_SYSCLK: System Clock selected as I2C1 clock
+ */
+#define __HAL_RCC_I2C1_CONFIG(__I2C1CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_I2C1SW, (uint32_t)(__I2C1CLKSource__))
+
+/** @brief Macro to get the I2C1 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_I2C1CLKSOURCE_HSI: HSI selected as I2C1 clock
+ * @arg RCC_I2C1CLKSOURCE_SYSCLK: System Clock selected as I2C1 clock
+ */
+#define __HAL_RCC_GET_I2C1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_I2C1SW)))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_RTC_Clock_Configuration RCC RTC Clock Configuration
+ * @{
+ */
+/** @brief Macros to enable or disable the the RTC clock.
+ * @note These macros must be used only after the RTC clock source was selected.
+ */
+#define __HAL_RCC_RTC_ENABLE() SET_BIT(RCC->BDCR, RCC_BDCR_RTCEN)
+#define __HAL_RCC_RTC_DISABLE() CLEAR_BIT(RCC->BDCR, RCC_BDCR_RTCEN)
+
+/** @brief Macro to configure the RTC clock (RTCCLK).
+ * @note As the RTC clock configuration bits are in the Backup domain and write
+ * access is denied to this domain after reset, you have to enable write
+ * access using the Power Backup Access macro before to configure
+ * the RTC clock source (to be done once after reset).
+ * @note Once the RTC clock is configured it can't be changed unless the
+ * Backup domain is reset using __HAL_RCC_BackupReset_RELEASE() macro, or by
+ * a Power On Reset (POR).
+ * @param __RTCCLKSource__: specifies the RTC clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_RTCCLKSOURCE_NONE: No clock selected as RTC clock
+ * @arg RCC_RTCCLKSOURCE_LSE: LSE selected as RTC clock
+ * @arg RCC_RTCCLKSOURCE_LSI: LSI selected as RTC clock
+ * @arg RCC_RTCCLKSOURCE_HSE_DIV32: HSE clock divided by 32
+ *
+ * @note If the LSE is used as RTC clock source, the RTC continues to
+ * work in STOP and STANDBY modes, and can be used as wakeup source.
+ * However, when the LSI clock and HSE clock divided by 32 is used as RTC clock source,
+ * the RTC cannot be used in STOP and STANDBY modes.
+ * @note The system must always be configured so as to get a PCLK frequency greater than or
+ * equal to the RTCCLK frequency for a proper operation of the RTC.
+ */
+#define __HAL_RCC_RTC_CONFIG(__RTCCLKSource__) \
+ MODIFY_REG(RCC->BDCR, RCC_BDCR_RTCSEL, (uint32_t)(__RTCCLKSource__))
+
+/** @brief Macro to get the RTC clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_RTCCLKSOURCE_NONE: No clock selected as RTC clock
+ * @arg RCC_RTCCLKSOURCE_LSE: LSE selected as RTC clock
+ * @arg RCC_RTCCLKSOURCE_LSI: LSI selected as RTC clock
+ * @arg RCC_RTCCLKSOURCE_HSE_DIV32: HSE clock divided by 32 selected as RTC clock
+ */
+#define __HAL_RCC_GET_RTC_SOURCE() ((uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL)))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Force_Release_Backup RCC Force Release Backup
+ * @{
+ */
+
+/** @brief Macro to force or release the Backup domain reset.
+ * @note These macros reset the RTC peripheral (including the backup registers)
+ * and the RTC clock source selection in RCC_CSR register.
+ * @note The BKPSRAM is not affected by this reset.
+ */
+#define __HAL_RCC_BACKUPRESET_FORCE() SET_BIT(RCC->BDCR, RCC_BDCR_BDRST)
+#define __HAL_RCC_BACKUPRESET_RELEASE() CLEAR_BIT(RCC->BDCR, RCC_BDCR_BDRST)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLL_Configuration RCC PLL Configuration
+ * @{
+ */
+
+/** @brief Macro to enable or disable the PLL.
+ * @note After enabling the PLL, the application software should wait on
+ * PLLRDY flag to be set indicating that PLL clock is stable and can
+ * be used as system clock source.
+ * @note The PLL can not be disabled if it is used as system clock source
+ * @note The PLL is disabled by hardware when entering STOP and STANDBY modes.
+ */
+#define __HAL_RCC_PLL_ENABLE() SET_BIT(RCC->CR, RCC_CR_PLLON)
+#define __HAL_RCC_PLL_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_PLLON)
+
+/** @brief Macro to configure the PLL clock source, multiplication and division factors.
+ * @note This macro must be used only when the PLL is disabled.
+ *
+ * @param __RCC_PLLSource__: specifies the PLL entry clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry
+ * @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry
+ * @param __PREDIV__: specifies the predivider factor for PLL VCO input clock
+ * This parameter must be a number between RCC_PREDIV_DIV1 and RCC_PREDIV_DIV16.
+ * @param __PLLMUL__: specifies the multiplication factor for PLL VCO input clock
+ * This parameter must be a number between RCC_PLL_MUL2 and RCC_PLL_MUL16.
+ *
+ */
+#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSource__ , __PREDIV__, __PLLMUL__) \
+ do { \
+ MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV, (__PREDIV__)); \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_PLLMUL | RCC_CFGR_PLLSRC, (uint32_t)((__PLLMUL__)|(__RCC_PLLSource__))); \
+ } while(0)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Get_Clock_source RCC Get Clock source
+ * @{
+ */
+
+/** @brief Macro to get the clock source used as system clock.
+ * @retval The clock source used as system clock.
+ * The returned value can be one of the following value:
+ * @arg RCC_SYSCLKSOURCE_STATUS_HSI: HSI used as system clock
+ * @arg RCC_SYSCLKSOURCE_STATUS_HSE: HSE used as system clock
+ * @arg RCC_SYSCLKSOURCE_STATUS_PLLCLK: PLL used as system clock
+ */
+#define __HAL_RCC_GET_SYSCLK_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_SWS)))
+
+/** @brief Macro to get the oscillator used as PLL clock source.
+ * @retval The oscillator used as PLL clock source. The returned value can be one
+ * of the following:
+ * - RCC_PLLSOURCE_HSI: HSI oscillator is used as PLL clock source.
+ * - RCC_PLLSOURCE_HSE: HSE oscillator is used as PLL clock source.
+ */
+#define __HAL_RCC_GET_PLL_OSCSOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PLLSRC)))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Flags_Interrupts_Management RCC Flags Interrupts Management
+ * @brief macros to manage the specified RCC Flags and interrupts.
+ * @{
+ */
+
+/** @brief Enable RCC interrupt (Perform Byte access to RCC_CIR[12:8] bits to enable
+ * the selected interrupts.).
+ * @param __INTERRUPT__: specifies the RCC interrupt sources to be enabled.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt enable
+ * @arg RCC_IT_LSERDY: LSE ready interrupt enable
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt enable
+ * @arg RCC_IT_HSERDY: HSE ready interrupt enable
+ * @arg RCC_IT_PLLRDY: PLL ready interrupt enable
+ * @arg RCC_IT_HSI14RDY: HSI14 ready interrupt enable
+ * @arg RCC_IT_HSI48RDY: HSI48 ready interrupt enable (only applicable to STM32F0X2 USB devices)
+ */
+#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) (*(__IO uint8_t *)RCC_CIR_BYTE1_ADDRESS |= (__INTERRUPT__))
+
+/** @brief Disable RCC interrupt (Perform Byte access to RCC_CIR[12:8] bits to disable
+ * the selected interrupts.).
+ * @param __INTERRUPT__: specifies the RCC interrupt sources to be disabled.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt enable
+ * @arg RCC_IT_LSERDY: LSE ready interrupt enable
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt enable
+ * @arg RCC_IT_HSERDY: HSE ready interrupt enable
+ * @arg RCC_IT_PLLRDY: PLL ready interrupt enable
+ * @arg RCC_IT_HSI14RDY: HSI14 ready interrupt enable
+ * @arg RCC_IT_HSI48RDY: HSI48 ready interrupt enable (only applicable to STM32F0X2 USB devices)
+ */
+#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) (*(__IO uint8_t *)RCC_CIR_BYTE1_ADDRESS &= ~(__INTERRUPT__))
+
+/** @brief Clear the RCC's interrupt pending bits ( Perform Byte access to RCC_CIR[23:16]
+ * bits to clear the selected interrupt pending bits.
+ * @param __IT__: specifies the interrupt pending bit to clear.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt clear
+ * @arg RCC_IT_LSERDY: LSE ready interrupt clear
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt clear
+ * @arg RCC_IT_HSERDY: HSE ready interrupt clear
+ * @arg RCC_IT_PLLRDY: PLL ready interrupt clear
+ * @arg RCC_IT_HSI14RDY: HSI14 ready interrupt clear
+ * @arg RCC_IT_HSI48RDY: HSI48 ready interrupt clear (only applicable to STM32F0X2 USB devices)
+ * @arg RCC_IT_CSS: Clock Security System interrupt clear
+ */
+#define __HAL_RCC_CLEAR_IT(__IT__) (*(__IO uint8_t *)RCC_CIR_BYTE2_ADDRESS = (__IT__))
+
+/** @brief Check the RCC's interrupt has occurred or not.
+ * @param __IT__: specifies the RCC interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt flag
+ * @arg RCC_IT_LSERDY: LSE ready interrupt flag
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt flag
+ * @arg RCC_IT_HSERDY: HSE ready interrupt flag
+ * @arg RCC_IT_PLLRDY: PLL ready interrupt flag
+ * @arg RCC_IT_HSI14RDY: HSI14 ready interrupt flag
+ * @arg RCC_IT_HSI48RDY: HSI48 ready interrupt flag (only applicable to STM32F0X2 USB devices)
+ * @arg RCC_IT_CSS: Clock Security System interrupt flag
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_RCC_GET_IT(__IT__) ((RCC->CIR & (__IT__)) == (__IT__))
+
+/** @brief Set RMVF bit to clear the reset flags: RCC_FLAG_OBLRST, RCC_FLAG_PINRST, RCC_FLAG_PORRST, RCC_FLAG_SFTRST,
+ * RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST, RCC_FLAG_LPWRRST
+ */
+#define __HAL_RCC_CLEAR_RESET_FLAGS() SET_BIT(RCC->CSR, RCC_CSR_RMVF)
+
+/** @brief Check RCC flag is set or not.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready
+ * @arg RCC_FLAG_HSERDY: HSE oscillator clock ready
+ * @arg RCC_FLAG_PLLRDY: PLL clock ready
+ * @arg RCC_FLAG_HSI14RDY: HSI14 oscillator clock ready
+ * @arg RCC_FLAG_HSI48RDY: HSI48 oscillator clock ready (only applicable to STM32F0X2 USB devices)
+ * @arg RCC_FLAG_LSERDY: LSE oscillator clock ready
+ * @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready
+ * @arg RCC_FLAG_OBLRST: Option Byte Load reset
+ * @arg RCC_FLAG_PINRST: Pin reset
+ * @arg RCC_FLAG_PORRST: POR/PDR reset
+ * @arg RCC_FLAG_SFTRST: Software reset
+ * @arg RCC_FLAG_IWDGRST: Independent Watchdog reset
+ * @arg RCC_FLAG_WWDGRST: Window Watchdog reset
+ * @arg RCC_FLAG_LPWRRST: Low Power reset
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define RCC_FLAG_MASK ((uint8_t)0x1F)
+#define __HAL_RCC_GET_FLAG(__FLAG__) (((((__FLAG__) >> 5) == CR_REG_INDEX)? RCC->CR : \
+ (((__FLAG__) >> 5) == CR2_REG_INDEX)? RCC->CR2 : \
+ (((__FLAG__) >> 5) == BDCR_REG_INDEX) ? RCC->BDCR : \
+ RCC->CSR) & ((uint32_t)1 << ((__FLAG__) & RCC_FLAG_MASK)))
+
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Include RCC HAL Extension module */
+#include "stm32f0xx_hal_rcc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup RCC_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup RCC_Exported_Functions_Group1
+ * @{
+ */
+
+/* Initialization and de-initialization functions ***************************/
+void HAL_RCC_DeInit(void);
+HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct);
+HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency);
+
+/**
+ * @}
+ */
+
+/** @addtogroup RCC_Exported_Functions_Group2
+ * @{
+ */
+
+/* Peripheral Control functions *********************************************/
+void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv);
+void HAL_RCC_EnableCSS(void);
+void HAL_RCC_DisableCSS(void);
+uint32_t HAL_RCC_GetSysClockFreq(void);
+uint32_t HAL_RCC_GetHCLKFreq(void);
+uint32_t HAL_RCC_GetPCLK1Freq(void);
+void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct);
+void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency);
+
+/* CSS NMI IRQ handler */
+void HAL_RCC_NMI_IRQHandler(void);
+
+/* User Callbacks in non blocking mode (IT mode) */
+void HAL_RCC_CCSCallback(void);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_RCC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
+
diff --git a/f0/include/stm32f0xx_hal_rcc_ex.h b/f0/include/stm32f0xx_hal_rcc_ex.h
new file mode 100755
index 0000000000000000000000000000000000000000..6675388aa9a306bc6479756b564d2e64b2009551
--- /dev/null
+++ b/f0/include/stm32f0xx_hal_rcc_ex.h
@@ -0,0 +1,1693 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_rcc_ex.h
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief Header file of RCC HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_RCC_EX_H
+#define __STM32F0xx_HAL_RCC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RCCEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup RCCEx_Exported_Types RCCEx Exported Types
+ * @{
+ */
+
+/**
+ * @brief RCC extended clocks structure definition
+ */
+#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx) || \
+ defined(STM32F030xC)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCC_USART1_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F038xx ||
+ STM32F030xC */
+
+#if defined(STM32F070x6) || defined(STM32F070xB)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCC_USART1_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t UsbClockSelection; /*!< USB clock source
+ This parameter can be a value of @ref RCCEx_USB_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F070x6 || STM32F070xB */
+
+#if defined(STM32F042x6) || defined(STM32F048xx)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCC_USART1_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t CecClockSelection; /*!< HDMI CEC clock source
+ This parameter can be a value of @ref RCCEx_CEC_Clock_Source */
+
+ uint32_t UsbClockSelection; /*!< USB clock source
+ This parameter can be a value of @ref RCCEx_USB_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F042x6 || STM32F048xx */
+
+#if defined(STM32F051x8) || defined(STM32F058xx)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCC_USART1_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t CecClockSelection; /*!< HDMI CEC clock source
+ This parameter can be a value of @ref RCCEx_CEC_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F051x8 || STM32F058xx */
+
+#if defined(STM32F071xB)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCC_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCCEx_USART2_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t CecClockSelection; /*!< HDMI CEC clock source
+ This parameter can be a value of @ref RCCEx_CEC_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F071xB */
+
+#if defined(STM32F072xB) || defined(STM32F078xx)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCC_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCCEx_USART2_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t CecClockSelection; /*!< HDMI CEC clock source
+ This parameter can be a value of @ref RCCEx_CEC_Clock_Source */
+
+ uint32_t UsbClockSelection; /*!< USB clock source
+ This parameter can be a value of @ref RCCEx_USB_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F072xB || STM32F078xx */
+
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCC_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCCEx_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCCEx_USART3_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t CecClockSelection; /*!< HDMI CEC clock source
+ This parameter can be a value of @ref RCCEx_CEC_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+/**
+ * @brief RCC_CRS Init structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Specifies the division factor of the SYNC signal.
+ This parameter can be a value of @ref RCCEx_CRS_SynchroDivider */
+
+ uint32_t Source; /*!< Specifies the SYNC signal source.
+ This parameter can be a value of @ref RCCEx_CRS_SynchroSource */
+
+ uint32_t Polarity; /*!< Specifies the input polarity for the SYNC signal source.
+ This parameter can be a value of @ref RCCEx_CRS_SynchroPolarity */
+
+ uint32_t ReloadValue; /*!< Specifies the value to be loaded in the frequency error counter with each SYNC event.
+ It can be calculated in using macro __HAL_RCC_CRS_CALCULATE_RELOADVALUE(_FTARGET_, _FSYNC_)
+ This parameter must be a number between 0 and 0xFFFF or a value of @ref RCCEx_CRS_ReloadValueDefault .*/
+
+ uint32_t ErrorLimitValue; /*!< Specifies the value to be used to evaluate the captured frequency error value.
+ This parameter must be a number between 0 and 0xFF or a value of @ref RCCEx_CRS_ErrorLimitDefault */
+
+ uint32_t HSI48CalibrationValue; /*!< Specifies a user-programmable trimming value to the HSI48 oscillator.
+ This parameter must be a number between 0 and 0x3F or a value of @ref RCCEx_CRS_HSI48CalibrationDefault */
+
+}RCC_CRSInitTypeDef;
+
+/**
+ * @brief RCC_CRS Synchronization structure definition
+ */
+typedef struct
+{
+ uint32_t ReloadValue; /*!< Specifies the value loaded in the Counter reload value.
+ This parameter must be a number between 0 and 0xFFFF*/
+
+ uint32_t HSI48CalibrationValue; /*!< Specifies value loaded in HSI48 oscillator smooth trimming.
+ This parameter must be a number between 0 and 0x3F */
+
+ uint32_t FreqErrorCapture; /*!< Specifies the value loaded in the .FECAP, the frequency error counter
+ value latched in the time of the last SYNC event.
+ This parameter must be a number between 0 and 0xFFFF */
+
+ uint32_t FreqErrorDirection; /*!< Specifies the value loaded in the .FEDIR, the counting direction of the
+ frequency error counter latched in the time of the last SYNC event.
+ It shows whether the actual frequency is below or above the target.
+ This parameter must be a value of @ref RCCEx_CRS_FreqErrorDirection*/
+
+}RCC_CRSSynchroInfoTypeDef;
+
+#endif /* STM32F042x6 || STM32F048xx */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup RCCEx_Exported_Constants RCCEx Exported Constants
+ * @{
+ */
+
+/** @defgroup RCCEx_CRS_Status RCCEx CRS Status
+ * @{
+ */
+#if defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+#define RCC_CRS_NONE ((uint32_t)0x00000000)
+#define RCC_CRS_TIMEOUT ((uint32_t)0x00000001)
+#define RCC_CRS_SYNCOK ((uint32_t)0x00000002)
+#define RCC_CRS_SYNCWARM ((uint32_t)0x00000004)
+#define RCC_CRS_SYNCERR ((uint32_t)0x00000008)
+#define RCC_CRS_SYNCMISS ((uint32_t)0x00000010)
+#define RCC_CRS_TRIMOV ((uint32_t)0x00000020)
+
+#endif /* STM32F042x6 || STM32F048xx */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_Periph_Clock_Selection RCCEx Periph Clock Selection
+ * @{
+ */
+#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx) || \
+ defined(STM32F030xC)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_I2C1 | \
+ RCC_PERIPHCLK_RTC))
+#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F038xx ||
+ STM32F030xC */
+
+#if defined(STM32F070x6) || defined(STM32F070xB)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+#define RCC_PERIPHCLK_USB ((uint32_t)0x00020000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_I2C1 | \
+ RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_USB))
+#endif /* STM32F070x6 || STM32F070xB */
+
+#if defined(STM32F042x6) || defined(STM32F048xx)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_CEC ((uint32_t)0x00000400)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+#define RCC_PERIPHCLK_USB ((uint32_t)0x00020000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_I2C1 | \
+ RCC_PERIPHCLK_CEC | RCC_PERIPHCLK_RTC | \
+ RCC_PERIPHCLK_USB))
+#endif /* STM32F042x6 || STM32F048xx */
+
+#if defined(STM32F051x8) || defined(STM32F058xx)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_CEC ((uint32_t)0x00000400)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_I2C1 | \
+ RCC_PERIPHCLK_CEC | RCC_PERIPHCLK_RTC))
+#endif /* STM32F051x8 || STM32F058xx */
+
+#if defined(STM32F071xB)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_USART2 ((uint32_t)0x00000002)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_CEC ((uint32_t)0x00000400)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_CEC | \
+ RCC_PERIPHCLK_RTC))
+#endif /* STM32F071xB */
+
+#if defined(STM32F072xB) || defined(STM32F078xx)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_USART2 ((uint32_t)0x00000002)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_CEC ((uint32_t)0x00000400)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+#define RCC_PERIPHCLK_USB ((uint32_t)0x00020000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_CEC | \
+ RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_USB))
+#endif /* STM32F072xB || STM32F078xx */
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_USART2 ((uint32_t)0x00000002)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_CEC ((uint32_t)0x00000400)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+#define RCC_PERIPHCLK_USART3 ((uint32_t)0x00040000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_CEC | \
+ RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_USART3 ))
+#endif /* STM32F091xC || STM32F098xx */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_MCO_Clock_Source RCCEx MCO Clock Source
+ * @{
+ */
+
+#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) || defined(STM32F070x6) || defined(STM32F070xB) || defined(STM32F030xC)
+
+#define RCC_MCOSOURCE_PLLCLK_NODIV (RCC_CFGR_MCO_PLL | RCC_CFGR_PLLNODIV)
+
+#define IS_RCC_MCOSOURCE(SOURCE) (((SOURCE) == RCC_MCOSOURCE_NONE) || \
+ ((SOURCE) == RCC_MCOSOURCE_LSI) || \
+ ((SOURCE) == RCC_MCOSOURCE_LSE) || \
+ ((SOURCE) == RCC_MCOSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_MCOSOURCE_HSI) || \
+ ((SOURCE) == RCC_MCOSOURCE_HSE) || \
+ ((SOURCE) == RCC_MCOSOURCE_PLLCLK_NODIV) || \
+ ((SOURCE) == RCC_MCOSOURCE_PLLCLK_DIV2) || \
+ ((SOURCE) == RCC_MCOSOURCE_HSI14))
+
+#endif /* STM32F030x6 || STM32F031x6 || STM32F038xx || STM32F070x6 || STM32F070xB || STM32F030xC */
+
+#if defined(STM32F030x8) || defined(STM32F051x8) || defined(STM32F058xx)
+
+#define IS_RCC_MCOSOURCE(SOURCE) (((SOURCE) == RCC_MCOSOURCE_NONE) || \
+ ((SOURCE) == RCC_MCOSOURCE_LSI) || \
+ ((SOURCE) == RCC_MCOSOURCE_LSE) || \
+ ((SOURCE) == RCC_MCOSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_MCOSOURCE_HSI) || \
+ ((SOURCE) == RCC_MCOSOURCE_HSE) || \
+ ((SOURCE) == RCC_MCOSOURCE_PLLCLK_DIV2) || \
+ ((SOURCE) == RCC_MCOSOURCE_HSI14))
+
+#endif /* STM32F030x8 || STM32F051x8 || STM32F058xx */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+#define RCC_MCOSOURCE_HSI48 RCC_CFGR_MCO_HSI48
+#define RCC_MCOSOURCE_PLLCLK_NODIV (RCC_CFGR_MCO_PLL | RCC_CFGR_PLLNODIV)
+
+#define IS_RCC_MCOSOURCE(SOURCE) (((SOURCE) == RCC_MCOSOURCE_NONE) || \
+ ((SOURCE) == RCC_MCOSOURCE_LSI) || \
+ ((SOURCE) == RCC_MCOSOURCE_LSE) || \
+ ((SOURCE) == RCC_MCOSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_MCOSOURCE_HSI) || \
+ ((SOURCE) == RCC_MCOSOURCE_HSE) || \
+ ((SOURCE) == RCC_MCOSOURCE_PLLCLK_NODIV) || \
+ ((SOURCE) == RCC_MCOSOURCE_PLLCLK_DIV2) || \
+ ((SOURCE) == RCC_MCOSOURCE_HSI14) || \
+ ((SOURCE) == RCC_MCOSOURCE_HSI48))
+
+#define RCC_IT_HSI48 ((uint8_t)0x40)
+
+/* Flags in the CR2 register */
+#define RCC_CR2_HSI48RDY_BitNumber 16
+
+#define RCC_FLAG_HSI48RDY ((uint8_t)((CR2_REG_INDEX << 5) | RCC_CR2_HSI48RDY_BitNumber))
+
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+/**
+ * @}
+ */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx)
+
+/** @defgroup RCCEx_USB_Clock_Source RCCEx USB Clock Source
+ * @{
+ */
+#define RCC_USBCLKSOURCE_HSI48 RCC_CFGR3_USBSW_HSI48
+#define RCC_USBCLKSOURCE_PLLCLK RCC_CFGR3_USBSW_PLLCLK
+
+#define IS_RCC_USBCLKSOURCE(SOURCE) (((SOURCE) == RCC_USBCLKSOURCE_HSI48) || \
+ ((SOURCE) == RCC_USBCLKSOURCE_PLLCLK))
+/**
+ * @}
+ */
+
+#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || STM32F078xx */
+
+#if defined(STM32F070x6) || defined(STM32F070xB)
+
+/** @defgroup RCCEx_USB_Clock_Source RCCEx USB Clock Source
+ * @{
+ */
+#define RCC_USBCLKSOURCE_PLLCLK RCC_CFGR3_USBSW_PLLCLK
+
+#define IS_RCC_USBCLKSOURCE(SOURCE) (((SOURCE) == RCC_USBCLKSOURCE_PLLCLK))
+/**
+ * @}
+ */
+
+#endif /* STM32F070x6 || STM32F070xB */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+/** @defgroup RCCEx_USART2_Clock_Source RCCEx USART2 Clock Source
+ * @{
+ */
+#define RCC_USART2CLKSOURCE_PCLK1 RCC_CFGR3_USART2SW_PCLK
+#define RCC_USART2CLKSOURCE_SYSCLK RCC_CFGR3_USART2SW_SYSCLK
+#define RCC_USART2CLKSOURCE_LSE RCC_CFGR3_USART2SW_LSE
+#define RCC_USART2CLKSOURCE_HSI RCC_CFGR3_USART2SW_HSI
+
+#define IS_RCC_USART2CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART2CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_USART2CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_USART2CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_USART2CLKSOURCE_HSI))
+/**
+ * @}
+ */
+
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+
+/** @defgroup RCCEx_USART3_Clock_Source RCCEx USART3 Clock Source
+ * @{
+ */
+#define RCC_USART3CLKSOURCE_PCLK1 RCC_CFGR3_USART3SW_PCLK
+#define RCC_USART3CLKSOURCE_SYSCLK RCC_CFGR3_USART3SW_SYSCLK
+#define RCC_USART3CLKSOURCE_LSE RCC_CFGR3_USART3SW_LSE
+#define RCC_USART3CLKSOURCE_HSI RCC_CFGR3_USART3SW_HSI
+
+#define IS_RCC_USART3CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART3CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_USART3CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_USART3CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_USART3CLKSOURCE_HSI))
+/**
+ * @}
+ */
+
+#endif /* STM32F091xC || STM32F098xx */
+
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+/** @defgroup RCCEx_CEC_Clock_Source RCCEx CEC Clock Source
+ * @{
+ */
+#define RCC_CECCLKSOURCE_HSI RCC_CFGR3_CECSW_HSI_DIV244
+#define RCC_CECCLKSOURCE_LSE RCC_CFGR3_CECSW_LSE
+
+#define IS_RCC_CECCLKSOURCE(SOURCE) (((SOURCE) == RCC_CECCLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_CECCLKSOURCE_LSE))
+/**
+ * @}
+ */
+
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+/** @defgroup RCCEx_PLL_Clock_Source RCCEx PLL Clock Source
+ * @{
+ */
+#define RCC_PLLSOURCE_HSI RCC_CFGR_PLLSRC_HSI_PREDIV
+#define RCC_PLLSOURCE_HSI48 RCC_CFGR_PLLSRC_HSI48_PREDIV
+
+#define IS_RCC_PLLSOURCE(SOURCE) (((SOURCE) == RCC_PLLSOURCE_HSI) || \
+ ((SOURCE) == RCC_PLLSOURCE_HSI48) || \
+ ((SOURCE) == RCC_PLLSOURCE_HSE))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_System_Clock_Source RCCEx System Clock Source
+ * @{
+ */
+#define RCC_SYSCLKSOURCE_HSI48 RCC_CFGR_SW_HSI48
+
+#define IS_RCC_SYSCLKSOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_HSE) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_PLLCLK) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_HSI48))
+
+#define RCC_SYSCLKSOURCE_STATUS_HSI48 RCC_CFGR_SWS_HSI48
+
+#define IS_RCC_SYSCLKSOURCE_STATUS(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_STATUS_HSI) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_STATUS_HSE) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_STATUS_PLLCLK) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_STATUS_HSI48))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_HSI48_Config RCCEx HSI48 Config
+ * @{
+ */
+#define RCC_HSI48_OFF ((uint8_t)0x00)
+#define RCC_HSI48_ON ((uint8_t)0x01)
+
+#define IS_RCC_HSI48(HSI48) (((HSI48) == RCC_HSI48_OFF) || ((HSI48) == RCC_HSI48_ON))
+/**
+ * @}
+ */
+#else
+/** @defgroup RCCEx_PLL_Clock_Source RCCEx PLL Clock Source
+ * @{
+ */
+
+#if defined(STM32F070xB) || defined(STM32F070x6) || defined(STM32F030xC)
+#define RCC_PLLSOURCE_HSI RCC_CFGR_PLLSRC_HSI_PREDIV
+#else
+#define RCC_PLLSOURCE_HSI RCC_CFGR_PLLSRC_HSI_DIV2
+#endif
+
+#define IS_RCC_PLLSOURCE(SOURCE) (((SOURCE) == RCC_PLLSOURCE_HSI) || \
+ ((SOURCE) == RCC_PLLSOURCE_HSE))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_System_Clock_Source RCCEx System Clock Source
+ * @{
+ */
+#define IS_RCC_SYSCLKSOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_HSE) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_PLLCLK))
+
+#define IS_RCC_SYSCLKSOURCE_STATUS(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_STATUS_HSI) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_STATUS_HSE) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_STATUS_PLLCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_HSI48_Config RCCEx HSI48 Config
+ * @{
+ */
+#define RCC_HSI48_OFF ((uint8_t)0x00)
+
+#define IS_RCC_HSI48(HSI48) (((HSI48) == RCC_HSI48_OFF))
+/**
+ * @}
+ */
+
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+
+/** @defgroup RCCEx_MCOx_Clock_Prescaler RCCEx MCOx Clock Prescaler
+ * @{
+ */
+
+#if defined(STM32F030x8) || defined(STM32F051x8) || defined(STM32F058xx)
+
+#define RCC_MCO_NODIV ((uint32_t)0x00000000)
+
+#define IS_RCC_MCODIV(DIV) (((DIV) == RCC_MCO_NODIV))
+
+#endif /* STM32F030x8 || STM32F051x8 || STM32F058xx */
+
+#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) || defined(STM32F070x6) || \
+ defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F071xB) || defined(STM32F070xB) || \
+ defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define RCC_MCO_DIV1 ((uint32_t)0x00000000)
+#define RCC_MCO_DIV2 ((uint32_t)0x10000000)
+#define RCC_MCO_DIV4 ((uint32_t)0x20000000)
+#define RCC_MCO_DIV8 ((uint32_t)0x30000000)
+#define RCC_MCO_DIV16 ((uint32_t)0x40000000)
+#define RCC_MCO_DIV32 ((uint32_t)0x50000000)
+#define RCC_MCO_DIV64 ((uint32_t)0x60000000)
+#define RCC_MCO_DIV128 ((uint32_t)0x70000000)
+
+#define IS_RCC_MCODIV(DIV) (((DIV) == RCC_MCO_DIV1) || ((DIV) == RCC_MCO_DIV2) || \
+ ((DIV) == RCC_MCO_DIV4) || ((DIV) == RCC_MCO_DIV8) || \
+ ((DIV) == RCC_MCO_DIV16) || ((DIV) == RCC_MCO_DIV32) || \
+ ((DIV) == RCC_MCO_DIV64) || ((DIV) == RCC_MCO_DIV128))
+
+#endif /* STM32F030x6 || STM32F031x6 || STM32F038xx || STM32F042x6 || STM32F048xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070x6 || STM32F070xB */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+/**
+ * @}
+ */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+/** @defgroup RCCEx_CRS_SynchroSource RCCEx CRS SynchroSource
+ * @{
+ */
+#define RCC_CRS_SYNC_SOURCE_GPIO ((uint32_t)0x00) /*!< Synchro Signal soucre GPIO */
+#define RCC_CRS_SYNC_SOURCE_LSE CRS_CFGR_SYNCSRC_0 /*!< Synchro Signal source LSE */
+#define RCC_CRS_SYNC_SOURCE_USB CRS_CFGR_SYNCSRC_1 /*!< Synchro Signal source USB SOF (default)*/
+
+#define IS_RCC_CRS_SYNC_SOURCE(_SOURCE_) (((_SOURCE_) == RCC_CRS_SYNC_SOURCE_GPIO) || \
+ ((_SOURCE_) == RCC_CRS_SYNC_SOURCE_LSE) || \
+ ((_SOURCE_) == RCC_CRS_SYNC_SOURCE_USB))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_SynchroDivider RCCEx CRS SynchroDivider
+ * @{
+ */
+#define RCC_CRS_SYNC_DIV1 ((uint32_t)0x00) /*!< Synchro Signal not divided (default) */
+#define RCC_CRS_SYNC_DIV2 CRS_CFGR_SYNCDIV_0 /*!< Synchro Signal divided by 2 */
+#define RCC_CRS_SYNC_DIV4 CRS_CFGR_SYNCDIV_1 /*!< Synchro Signal divided by 4 */
+#define RCC_CRS_SYNC_DIV8 (CRS_CFGR_SYNCDIV_1 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 8 */
+#define RCC_CRS_SYNC_DIV16 CRS_CFGR_SYNCDIV_2 /*!< Synchro Signal divided by 16 */
+#define RCC_CRS_SYNC_DIV32 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 32 */
+#define RCC_CRS_SYNC_DIV64 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_1) /*!< Synchro Signal divided by 64 */
+#define RCC_CRS_SYNC_DIV128 CRS_CFGR_SYNCDIV /*!< Synchro Signal divided by 128 */
+
+#define IS_RCC_CRS_SYNC_DIV(_DIV_) (((_DIV_) == RCC_CRS_SYNC_DIV1) || ((_DIV_) == RCC_CRS_SYNC_DIV2) || \
+ ((_DIV_) == RCC_CRS_SYNC_DIV4) || ((_DIV_) == RCC_CRS_SYNC_DIV8) || \
+ ((_DIV_) == RCC_CRS_SYNC_DIV16) || ((_DIV_) == RCC_CRS_SYNC_DIV32) || \
+ ((_DIV_) == RCC_CRS_SYNC_DIV64) || ((_DIV_) == RCC_CRS_SYNC_DIV128))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_SynchroPolarity RCCEx CRS SynchroPolarity
+ * @{
+ */
+#define RCC_CRS_SYNC_POLARITY_RISING ((uint32_t)0x00) /*!< Synchro Active on rising edge (default) */
+#define RCC_CRS_SYNC_POLARITY_FALLING CRS_CFGR_SYNCPOL /*!< Synchro Active on falling edge */
+
+#define IS_RCC_CRS_SYNC_POLARITY(_POLARITY_) (((_POLARITY_) == RCC_CRS_SYNC_POLARITY_RISING) || \
+ ((_POLARITY_) == RCC_CRS_SYNC_POLARITY_FALLING))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_ReloadValueDefault RCCEx CRS ReloadValueDefault
+ * @{
+ */
+#define RCC_CRS_RELOADVALUE_DEFAULT ((uint32_t)0xBB7F) /*!< The reset value of the RELOAD field corresponds
+ to a target frequency of 48 MHz and a synchronization signal frequency of 1 kHz (SOF signal from USB). */
+
+#define IS_RCC_CRS_RELOADVALUE(_VALUE_) (((_VALUE_) <= 0xFFFF))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_ErrorLimitDefault RCCEx CRS ErrorLimitDefault
+ * @{
+ */
+#define RCC_CRS_ERRORLIMIT_DEFAULT ((uint32_t)0x22) /*!< Default Frequency error limit */
+
+#define IS_RCC_CRS_ERRORLIMIT(_VALUE_) (((_VALUE_) <= 0xFF))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_HSI48CalibrationDefault RCCEx CRS HSI48CalibrationDefault
+ * @{
+ */
+#define RCC_CRS_HSI48CALIBRATION_DEFAULT ((uint32_t)0x20) /*!< The default value is 32, which corresponds to the middle of the trimming interval.
+ The trimming step is around 67 kHz between two consecutive TRIM steps. A higher TRIM value
+ corresponds to a higher output frequency */
+
+#define IS_RCC_CRS_HSI48CALIBRATION(_VALUE_) (((_VALUE_) <= 0x3F))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_FreqErrorDirection RCCEx CRS FreqErrorDirection
+ * @{
+ */
+#define RCC_CRS_FREQERRORDIR_UP ((uint32_t)0x00) /*!< Upcounting direction, the actual frequency is above the target */
+#define RCC_CRS_FREQERRORDIR_DOWN ((uint32_t)CRS_ISR_FEDIR) /*!< Downcounting direction, the actual frequency is below the target */
+
+#define IS_RCC_CRS_FREQERRORDIR(_DIR_) (((_DIR_) == RCC_CRS_FREQERRORDIR_UP) || \
+ ((_DIR_) == RCC_CRS_FREQERRORDIR_DOWN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_Interrupt_Sources RCCEx CRS Interrupt Sources
+ * @{
+ */
+#define RCC_CRS_IT_SYNCOK CRS_ISR_SYNCOKF /*!< SYNC event OK */
+#define RCC_CRS_IT_SYNCWARN CRS_ISR_SYNCWARNF /*!< SYNC warning */
+#define RCC_CRS_IT_ERR CRS_ISR_ERRF /*!< error */
+#define RCC_CRS_IT_ESYNC CRS_ISR_ESYNCF /*!< Expected SYNC */
+#define RCC_CRS_IT_TRIMOVF CRS_ISR_TRIMOVF /*!< Trimming overflow or underflow */
+#define RCC_CRS_IT_SYNCERR CRS_ISR_SYNCERR /*!< SYNC error */
+#define RCC_CRS_IT_SYNCMISS CRS_ISR_SYNCMISS /*!< SYNC missed*/
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_Flags RCCEx CRS Flags
+ * @{
+ */
+#define RCC_CRS_FLAG_SYNCOK CRS_ISR_SYNCOKF /* SYNC event OK flag */
+#define RCC_CRS_FLAG_SYNCWARN CRS_ISR_SYNCWARNF /* SYNC warning flag */
+#define RCC_CRS_FLAG_ERR CRS_ISR_ERRF /* Error flag */
+#define RCC_CRS_FLAG_ESYNC CRS_ISR_ESYNCF /* Expected SYNC flag */
+#define RCC_CRS_FLAG_TRIMOVF CRS_ISR_TRIMOVF /*!< Trimming overflow or underflow */
+#define RCC_CRS_FLAG_SYNCERR CRS_ISR_SYNCERR /*!< SYNC error */
+#define RCC_CRS_FLAG_SYNCMISS CRS_ISR_SYNCMISS /*!< SYNC missed*/
+
+/**
+ * @}
+ */
+
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+/**
+ * @}
+ */
+
+/* Exported macros ------------------------------------------------------------*/
+/** @defgroup RCCEx_Exported_Macros RCCEx Exported Macros
+ * @{
+ */
+
+/** @defgroup RCCEx_Peripheral_Clock_Enable_Disable RCCEx_Peripheral_Clock_Enable_Disable
+ * @brief Enables or disables the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#if defined(STM32F030x6) || defined(STM32F030x8) || \
+ defined(STM32F051x8) || defined(STM32F058xx) || defined(STM32F070xB) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __GPIOD_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_GPIODEN))
+
+#define __GPIOD_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIODEN))
+
+#endif /* STM32F030x6 || STM32F030x8 || */
+ /* STM32F051x8 || STM32F058xx || STM32F070xB || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __GPIOE_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_GPIOEEN))
+
+#define __GPIOE_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOEEN))
+
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __TSC_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_TSCEN))
+
+#define __TSC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_TSCEN))
+
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __DMA2_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_DMA2EN))
+
+#define __DMA2_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_DMA2EN))
+
+#endif /* STM32F091xC || STM32F098xx */
+
+/** @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#if defined(STM32F030x8) || \
+ defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) || \
+ defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __USART2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_USART2EN))
+
+#define __USART2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART2EN))
+
+#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || STM32F070x6 || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F030x8) || \
+ defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __SPI2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_SPI2EN))
+
+#define __SPI2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI2EN))
+
+#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F031x6) || defined(STM32F038xx) || \
+ defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __TIM2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM2EN))
+
+#define __TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN))
+
+#endif /* STM32F031x6 || STM32F038xx || */
+ /* STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F030x8) || \
+ defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __TIM6_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM6EN))
+#define __I2C2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_I2C2EN))
+
+#define __TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN))
+#define __I2C2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C2EN))
+
+#endif /* STM32F030x8 || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __DAC1_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_DACEN))
+
+#define __DAC1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN))
+
+#endif /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __CEC_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_CECEN))
+
+#define __CEC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CECEN))
+
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __TIM7_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM7EN))
+#define __USART3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_USART3EN))
+#define __USART4_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_USART4EN))
+
+#define __TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN))
+#define __USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN))
+#define __USART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART4EN))
+
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) || \
+ defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)
+
+#define __USB_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_USBEN))
+
+#define __USB_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USBEN))
+
+#endif /* STM32F042x6 || STM32F048xx || STM32F070x6 || */
+ /* STM32F072xB || STM32F078xx || STM32F070xB */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __CAN_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_CANEN))
+#define __CAN_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CANEN))
+
+#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __CRS_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_CRSEN))
+
+#define __CRS_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CRSEN))
+
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __USART5_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_USART5EN))
+
+#define __USART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART5EN))
+
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+/** @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#if defined(STM32F030x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) || \
+ defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __TIM15_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM15EN))
+
+#define __TIM15_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM15EN))
+
+#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || STM32F070x6 || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __USART6_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_USART6EN))
+
+#define __USART6_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART6EN))
+
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __USART7_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_USART7EN))
+#define __USART8_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_USART8EN))
+
+#define __USART7_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART7EN))
+#define __USART8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART8EN))
+
+#endif /* STM32F091xC || STM32F098xx */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup RCCEx_Force_Release_Peripheral_Reset RCCEx Force Release Peripheral Reset
+ * @brief Forces or releases peripheral reset.
+ * @{
+ */
+
+/** @brief Force or release AHB peripheral reset.
+ */
+#if defined(STM32F030x6) || defined(STM32F030x8) || \
+ defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __GPIOD_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIODRST))
+
+#define __GPIOD_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIODRST))
+
+#endif /* STM32F030x6 || STM32F030x8 || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __GPIOE_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOERST))
+
+#define __GPIOE_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOERST))
+
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __TSC_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_TSCRST))
+
+#define __TSC_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_TSCRST))
+
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+/** @brief Force or release APB1 peripheral reset.
+ */
+#if defined(STM32F030x8) || \
+ defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) || \
+ defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __USART2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART2RST))
+#define __SPI2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST))
+
+#define __USART2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART2RST))
+#define __SPI2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST))
+
+#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || STM32F070x6 || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F031x6) || defined(STM32F038xx) || \
+ defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST))
+
+#define __TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST))
+
+#endif /* STM32F031x6 || STM32F038xx || */
+ /* STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F030x8) || \
+ defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) ||\
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST))
+#define __I2C2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST))
+
+#define __TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST))
+#define __I2C2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C2RST))
+
+#endif /* STM32F030x8 || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __DAC1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST))
+
+#define __DAC1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST))
+
+#endif /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __CEC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CECRST))
+
+#define __CEC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CECRST))
+
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST))
+#define __USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST))
+#define __USART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART4RST))
+
+#define __TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST))
+#define __USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST))
+#define __USART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART4RST))
+
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) || \
+ defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)
+
+#define __USB_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USBRST))
+
+#define __USB_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USBRST))
+
+#endif /* STM32F042x6 || STM32F048xx || STM32F070x6 || */
+ /* STM32F072xB || STM32F078xx || STM32F070xB */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __CAN_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CANRST))
+
+#define __CAN_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CANRST))
+
+#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __CRS_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CRSRST))
+
+#define __CRS_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CRSRST))
+
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __USART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART5RST))
+
+#define __USART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART5RST))
+
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+
+/** @brief Force or release APB2 peripheral reset.
+ */
+#if defined(STM32F030x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) || \
+ defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __TIM15_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM15RST))
+
+#define __TIM15_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM15RST))
+
+#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || STM32F070x6 || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __USART6_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART6RST))
+
+#define __USART6_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART6RST))
+
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __USART7_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART7RST))
+#define __USART8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART8RST))
+
+#define __USART7_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART7RST))
+#define __USART8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART8RST))
+
+#endif /* STM32F091xC || STM32F098xx */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_HSI48_Enable_Disable RCCEx HSI48 Enable Disable
+ * @brief Macros to enable or disable the Internal 48Mhz High Speed oscillator (HSI48).
+ * @note The HSI48 is stopped by hardware when entering STOP and STANDBY modes.
+ * @note HSI48 can not be stopped if it is used as system clock source. In this case,
+ * you have to select another source of the system clock then stop the HSI14.
+ * @note After enabling the HSI48 with __HAL_RCC_HSI48_ENABLE(), the application software
+ * should wait on HSI48RDY flag to be set indicating that HSI48 clock is stable and can be
+ * used as system clock source. This is not necessary if HAL_RCC_OscConfig() is used.
+ * @note When the HSI48 is stopped, HSI48RDY flag goes low after 6 HSI48 oscillator
+ * clock cycles.
+ * @{
+ */
+#if defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_HSI48_ENABLE() SET_BIT(RCC->CR2, RCC_CR2_HSI48ON)
+#define __HAL_RCC_HSI48_DISABLE() CLEAR_BIT(RCC->CR2, RCC_CR2_HSI48ON)
+
+/** @brief Macro to get the Internal 48Mhz High Speed oscillator (HSI48) state.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_HSI48_ON: HSI48 enabled
+ * @arg RCC_HSI48_OFF: HSI48 disabled
+ */
+#define __HAL_RCC_GET_HSI48_STATE() \
+ (((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CR2_HSI48ON)) != RESET) ? RCC_HSI48_ON : RCC_HSI48_OFF)
+
+#else
+
+/** @brief Macro to get the Internal 48Mhz High Speed oscillator (HSI48) state.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_HSI_OFF: HSI48 disabled
+ */
+#define __HAL_RCC_GET_HSI48_STATE() RCC_HSI_OFF
+
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_Peripheral_Clock_Source_Config RCCEx Peripheral Clock Source Config
+ * @{
+ */
+#if defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F070x6) || defined(STM32F070xB)
+
+/** @brief Macro to configure the USB clock (USBCLK).
+ * @param __USBCLKSource__: specifies the USB clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_USBCLKSOURCE_HSI48: HSI48 selected as USB clock (not available for STM32F070x6 & STM32F070xB)
+ * @arg RCC_USBCLKSOURCE_PLLCLK: PLL Clock selected as USB clock
+ */
+#define __HAL_RCC_USB_CONFIG(__USBCLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USBSW, (uint32_t)(__USBCLKSource__))
+
+/** @brief Macro to get the USB clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_USBCLKSOURCE_HSI48: HSI48 selected as USB clock
+ * @arg RCC_USBCLKSOURCE_PLLCLK: PLL Clock selected as USB clock
+ */
+#define __HAL_RCC_GET_USB_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USBSW)))
+
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F072xB || STM32F078xx || */
+ /* STM32F070x6 || STM32F070xB */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+/** @brief Macro to configure the CEC clock.
+ * @param __CECCLKSource__: specifies the CEC clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_CECCLKSOURCE_HSI: HSI selected as CEC clock
+ * @arg RCC_CECCLKSOURCE_LSE: LSE selected as CEC clock
+ */
+#define __HAL_RCC_CEC_CONFIG(__CECCLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_CECSW, (uint32_t)(__CECCLKSource__))
+
+/** @brief Macro to get the HDMI CEC clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_CECCLKSOURCE_HSI: HSI selected as CEC clock
+ * @arg RCC_CECCLKSOURCE_LSE: LSE selected as CEC clock
+ */
+#define __HAL_RCC_GET_CEC_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_CECSW)))
+
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || defined(STM32F098xx) */
+
+#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) || \
+ defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+/** @brief Macro to configure the MCO clock.
+ * @param __MCOCLKSource__: specifies the MCO clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_MCOSOURCE_HSI: HSI selected as MCO clock
+ * @arg RCC_MCOSOURCE_HSE: HSE selected as MCO clock
+ * @arg RCC_MCOSOURCE_LSI: LSI selected as MCO clock
+ * @arg RCC_MCOSOURCE_LSE: LSE selected as MCO clock
+ * @arg RCC_MCOSOURCE_PLLCLK_NODIV: PLLCLK selected as MCO clock
+ * @arg RCC_MCOSOURCE_PLLCLK_DIV2: PLLCLK Divided by 2 selected as MCO clock
+ * @arg RCC_MCOSOURCE_SYSCLK: System Clock selected as MCO clock
+ * @arg RCC_MCOSOURCE_HSI14: HSI14 selected as MCO clock
+ * @arg RCC_MCOSOURCE_HSI48: HSI48 selected as MCO clock
+ * @param __MCODiv__: specifies the MCO clock prescaler.
+ * This parameter can be one of the following values:
+ * @arg RCC_MCO_DIV1: MCO clock source is divided by 1
+ * @arg RCC_MCO_DIV2: MCO clock source is divided by 2
+ * @arg RCC_MCO_DIV4: MCO clock source is divided by 4
+ * @arg RCC_MCO_DIV8: MCO clock source is divided by 8
+ * @arg RCC_MCO_DIV16: MCO clock source is divided by 16
+ * @arg RCC_MCO_DIV32: MCO clock source is divided by 32
+ * @arg RCC_MCO_DIV64: MCO clock source is divided by 64
+ * @arg RCC_MCO_DIV128: MCO clock source is divided by 128
+ */
+#define __HAL_RCC_MCO_CONFIG(__MCOCLKSource__, __MCODiv__) \
+ MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO | RCC_CFGR_MCOPRE), ((__MCOCLKSource__) | (__MCODiv__)))
+#else
+
+/** @brief Macro to configure the MCO clock.
+ * @param __MCOCLKSource__: specifies the MCO clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_MCOSOURCE_HSI: HSI selected as MCO clock
+ * @arg RCC_MCOSOURCE_HSE: HSE selected as MCO clock
+ * @arg RCC_MCOSOURCE_LSI: LSI selected as MCO clock
+ * @arg RCC_MCOSOURCE_LSE: LSE selected as MCO clock
+ * @arg RCC_MCOSOURCE_PLLCLK_DIV2: PLLCLK Divided by 2 selected as MCO clock
+ * @arg RCC_MCOSOURCE_SYSCLK: System Clock selected as MCO clock
+ * @arg RCC_MCOSOURCE_HSI14: HSI14 selected as MCO clock
+ * @arg RCC_MCOSOURCE_HSI48: HSI48 selected as MCO clock
+ * @param __MCODiv__: specifies the MCO clock prescaler.
+ * This parameter can be one of the following values:
+ * @arg RCC_MCO_NODIV: No division applied on MCO clock source
+ */
+#define __HAL_RCC_MCO_CONFIG(__MCOCLKSource__, __MCODiv__) \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_MCO, __MCOCLKSource__)
+
+#endif /* STM32F030x6 || STM32F031x6 || STM32F038xx || STM32F070x6 || */
+ /* STM32F042x6 || STM32F048xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+/** @brief Macro to configure the USART2 clock (USART2CLK).
+ * @param __USART2CLKSource__: specifies the USART2 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_USART2CLKSOURCE_PCLK1: PCLK1 selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_HSI: HSI selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_SYSCLK: System Clock selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_LSE: LSE selected as USART2 clock
+ */
+#define __HAL_RCC_USART2_CONFIG(__USART2CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USART2SW, (uint32_t)(__USART2CLKSource__))
+
+/** @brief Macro to get the USART2 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_USART2CLKSOURCE_PCLK1: PCLK1 selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_HSI: HSI selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_SYSCLK: System Clock selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_LSE: LSE selected as USART2 clock
+ */
+#define __HAL_RCC_GET_USART2_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USART2SW)))
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx*/
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+/** @brief Macro to configure the USART3 clock (USART3CLK).
+ * @param __USART3CLKSource__: specifies the USART3 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_USART3CLKSOURCE_PCLK1: PCLK1 selected as USART3 clock
+ * @arg RCC_USART3CLKSOURCE_HSI: HSI selected as USART3 clock
+ * @arg RCC_USART3CLKSOURCE_SYSCLK: System Clock selected as USART3 clock
+ * @arg RCC_USART3CLKSOURCE_LSE: LSE selected as USART3 clock
+ */
+#define __HAL_RCC_USART3_CONFIG(__USART3CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USART3SW, (uint32_t)(__USART3CLKSource__))
+
+/** @brief Macro to get the USART3 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_USART3CLKSOURCE_PCLK1: PCLK1 selected as USART3 clock
+ * @arg RCC_USART3CLKSOURCE_HSI: HSI selected as USART3 clock
+ * @arg RCC_USART3CLKSOURCE_SYSCLK: System Clock selected as USART3 clock
+ * @arg RCC_USART3CLKSOURCE_LSE: LSE selected as USART3 clock
+ */
+#define __HAL_RCC_GET_USART3_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USART3SW)))
+
+#endif /* STM32F091xC || STM32F098xx */
+/**
+ * @}
+ */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+/** @defgroup RCCEx_IT_And_Flag RCCEx IT and Flag
+ * @{
+ */
+/* Interrupt & Flag management */
+
+/**
+ * @brief Enables the specified CRS interrupts.
+ * @param __INTERRUPT__: specifies the CRS interrupt sources to be enabled.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_CRS_IT_SYNCOK
+ * @arg RCC_CRS_IT_SYNCWARN
+ * @arg RCC_CRS_IT_ERR
+ * @arg RCC_CRS_IT_ESYNC
+ * @retval None
+ */
+#define __HAL_RCC_CRS_ENABLE_IT(__INTERRUPT__) (CRS->CR |= (__INTERRUPT__))
+
+/**
+ * @brief Disables the specified CRS interrupts.
+ * @param __INTERRUPT__: specifies the CRS interrupt sources to be disabled.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_CRS_IT_SYNCOK
+ * @arg RCC_CRS_IT_SYNCWARN
+ * @arg RCC_CRS_IT_ERR
+ * @arg RCC_CRS_IT_ESYNC
+ * @retval None
+ */
+#define __HAL_RCC_CRS_DISABLE_IT(__INTERRUPT__) (CRS->CR &= ~(__INTERRUPT__))
+
+/** @brief Check the CRS's interrupt has occurred or not.
+ * @param __INTERRUPT__: specifies the CRS interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg RCC_CRS_IT_SYNCOK
+ * @arg RCC_CRS_IT_SYNCWARN
+ * @arg RCC_CRS_IT_ERR
+ * @arg RCC_CRS_IT_ESYNC
+ * @retval The new state of __INTERRUPT__ (SET or RESET).
+ */
+#define __HAL_RCC_CRS_GET_IT_SOURCE(__INTERRUPT__) ((CRS->CR & (__INTERRUPT__))? SET : RESET)
+
+/** @brief Clear the CRS's interrupt pending bits
+ * bits to clear the selected interrupt pending bits.
+ * @param __INTERRUPT__: specifies the interrupt pending bit to clear.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_CRS_IT_SYNCOK
+ * @arg RCC_CRS_IT_SYNCWARN
+ * @arg RCC_CRS_IT_ERR
+ * @arg RCC_CRS_IT_ESYNC
+ * @arg RCC_CRS_IT_TRIMOVF
+ * @arg RCC_CRS_IT_SYNCERR
+ * @arg RCC_CRS_IT_SYNCMISS
+ */
+/* CRS IT Error Mask */
+#define RCC_CRS_IT_ERROR_MASK ((uint32_t)(RCC_CRS_IT_TRIMOVF | RCC_CRS_IT_SYNCERR | RCC_CRS_IT_SYNCMISS))
+
+#define __HAL_RCC_CRS_CLEAR_IT(__INTERRUPT__) ((((__INTERRUPT__) & RCC_CRS_IT_ERROR_MASK)!= 0) ? (CRS->ICR |= CRS_ICR_ERRC) : \
+ (CRS->ICR |= (__INTERRUPT__)))
+
+/**
+ * @brief Checks whether the specified CRS flag is set or not.
+ * @param _FLAG_: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg RCC_CRS_FLAG_SYNCOK
+ * @arg RCC_CRS_FLAG_SYNCWARN
+ * @arg RCC_CRS_FLAG_ERR
+ * @arg RCC_CRS_FLAG_ESYNC
+ * @arg RCC_CRS_FLAG_TRIMOVF
+ * @arg RCC_CRS_FLAG_SYNCERR
+ * @arg RCC_CRS_FLAG_SYNCMISS
+ * @retval The new state of _FLAG_ (TRUE or FALSE).
+ */
+#define __HAL_RCC_CRS_GET_FLAG(_FLAG_) ((CRS->ISR & (_FLAG_)) == (_FLAG_))
+
+/**
+ * @brief Clears the CRS specified FLAG.
+ * @param _FLAG_: specifies the flag to clear.
+ * This parameter can be one of the following values:
+ * @arg RCC_CRS_FLAG_SYNCOK
+ * @arg RCC_CRS_FLAG_SYNCWARN
+ * @arg RCC_CRS_FLAG_ERR
+ * @arg RCC_CRS_FLAG_ESYNC
+ * @arg RCC_CRS_FLAG_TRIMOVF
+ * @arg RCC_CRS_FLAG_SYNCERR
+ * @arg RCC_CRS_FLAG_SYNCMISS
+ * @retval None
+ */
+
+/* CRS Flag Error Mask */
+#define RCC_CRS_FLAG_ERROR_MASK ((uint32_t)(RCC_CRS_FLAG_TRIMOVF | RCC_CRS_FLAG_SYNCERR | RCC_CRS_FLAG_SYNCMISS))
+
+#define __HAL_RCC_CRS_CLEAR_FLAG(__FLAG__) ((((__FLAG__) & RCC_CRS_FLAG_ERROR_MASK)!= 0) ? (CRS->ICR |= CRS_ICR_ERRC) : \
+ (CRS->ICR |= (__FLAG__)))
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_Extended_Features RCCEx CRS Extended Features
+ * @{
+ */
+/**
+ * @brief Enables the oscillator clock for frequency error counter.
+ * @note when the CEN bit is set the CRS_CFGR register becomes write-protected.
+ * @retval None
+ */
+#define __HAL_RCC_CRS_ENABLE_FREQ_ERROR_COUNTER() (CRS->CR |= CRS_CR_CEN)
+
+/**
+ * @brief Disables the oscillator clock for frequency error counter.
+ * @retval None
+ */
+#define __HAL_RCC_CRS_DISABLE_FREQ_ERROR_COUNTER() (CRS->CR &= ~CRS_CR_CEN)
+
+/**
+ * @brief Enables the automatic hardware adjustement of TRIM bits.
+ * @note When the AUTOTRIMEN bit is set the CRS_CFGR register becomes write-protected.
+ * @retval None
+ */
+#define __HAL_RCC_CRS_ENABLE_AUTOMATIC_CALIB() (CRS->CR |= CRS_CR_AUTOTRIMEN)
+
+/**
+ * @brief Enables or disables the automatic hardware adjustement of TRIM bits.
+ * @retval None
+ */
+#define __HAL_RCC_CRS_DISABLE_AUTOMATIC_CALIB() (CRS->CR &= ~CRS_CR_AUTOTRIMEN)
+
+/**
+ * @brief Macro to calculate reload value to be set in CRS register according to target and sync frequencies
+ * @note The RELOAD value should be selected according to the ratio between the target frequency and the frequency
+ * of the synchronization source after prescaling. It is then decreased by one in order to
+ * reach the expected synchronization on the zero value. The formula is the following:
+ * RELOAD = (fTARGET / fSYNC) -1
+ * @param _FTARGET_ Target frequency (value in Hz)
+ * @param _FSYNC_ Synchronization signal frequency (value in Hz)
+ * @retval None
+ */
+#define __HAL_RCC_CRS_CALCULATE_RELOADVALUE(_FTARGET_, _FSYNC_) (((_FTARGET_) / (_FSYNC_)) - 1)
+
+/**
+ * @}
+ */
+
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup RCCEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup RCCEx_Exported_Functions_Group1
+ * @{
+ */
+
+HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit);
+void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit);
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+void HAL_RCCEx_CRSConfig(RCC_CRSInitTypeDef *pInit);
+void HAL_RCCEx_CRSSoftwareSynchronizationGenerate(void);
+void HAL_RCCEx_CRSGetSynchronizationInfo(RCC_CRSSynchroInfoTypeDef *pSynchroInfo);
+uint32_t HAL_RCCEx_CRSWaitSynchronization(uint32_t Timeout);
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_RCC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/include/stm32f0xx_hal_rtc.h b/f0/include/stm32f0xx_hal_rtc.h
new file mode 100755
index 0000000000000000000000000000000000000000..640639be8a40a079e207a2635d7a29d44a232bb1
--- /dev/null
+++ b/f0/include/stm32f0xx_hal_rtc.h
@@ -0,0 +1,785 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_rtc.h
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief Header file of RTC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_RTC_H
+#define __STM32F0xx_HAL_RTC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RTC RTC HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup RTC_Exported_Types RTC Exported Types
+ * @{
+ */
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_RTC_STATE_RESET = 0x00, /*!< RTC not yet initialized or disabled */
+ HAL_RTC_STATE_READY = 0x01, /*!< RTC initialized and ready for use */
+ HAL_RTC_STATE_BUSY = 0x02, /*!< RTC process is ongoing */
+ HAL_RTC_STATE_TIMEOUT = 0x03, /*!< RTC timeout state */
+ HAL_RTC_STATE_ERROR = 0x04 /*!< RTC error state */
+
+}HAL_RTCStateTypeDef;
+
+/**
+ * @brief RTC Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t HourFormat; /*!< Specifies the RTC Hour Format.
+ This parameter can be a value of @ref RTC_Hour_Formats */
+
+ uint32_t AsynchPrediv; /*!< Specifies the RTC Asynchronous Predivider value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7F */
+
+ uint32_t SynchPrediv; /*!< Specifies the RTC Synchronous Predivider value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7FFF */
+
+ uint32_t OutPut; /*!< Specifies which signal will be routed to the RTC output.
+ This parameter can be a value of @ref RTCEx_Output_selection_Definitions */
+
+ uint32_t OutPutPolarity; /*!< Specifies the polarity of the output signal.
+ This parameter can be a value of @ref RTC_Output_Polarity_Definitions */
+
+ uint32_t OutPutType; /*!< Specifies the RTC Output Pin mode.
+ This parameter can be a value of @ref RTC_Output_Type_ALARM_OUT */
+}RTC_InitTypeDef;
+
+/**
+ * @brief RTC Time structure definition
+ */
+typedef struct
+{
+ uint8_t Hours; /*!< Specifies the RTC Time Hour.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 12 if the RTC_HourFormat_12 is selected.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 23 if the RTC_HourFormat_24 is selected */
+
+ uint8_t Minutes; /*!< Specifies the RTC Time Minutes.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 59 */
+
+ uint8_t Seconds; /*!< Specifies the RTC Time Seconds.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 59 */
+
+ uint32_t SubSeconds; /*!< Specifies the RTC Time SubSeconds.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 59 */
+
+ uint8_t TimeFormat; /*!< Specifies the RTC AM/PM Time.
+ This parameter can be a value of @ref RTC_AM_PM_Definitions */
+
+ uint32_t DayLightSaving; /*!< Specifies RTC_DayLightSaveOperation: the value of hour adjustment.
+ This parameter can be a value of @ref RTC_DayLightSaving_Definitions */
+
+ uint32_t StoreOperation; /*!< Specifies RTC_StoreOperation value to be written in the BCK bit
+ in CR register to store the operation.
+ This parameter can be a value of @ref RTC_StoreOperation_Definitions */
+}RTC_TimeTypeDef;
+
+/**
+ * @brief RTC Date structure definition
+ */
+typedef struct
+{
+ uint8_t WeekDay; /*!< Specifies the RTC Date WeekDay.
+ This parameter can be a value of @ref RTC_WeekDay_Definitions */
+
+ uint8_t Month; /*!< Specifies the RTC Date Month (in BCD format).
+ This parameter can be a value of @ref RTC_Month_Date_Definitions */
+
+ uint8_t Date; /*!< Specifies the RTC Date.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 31 */
+
+ uint8_t Year; /*!< Specifies the RTC Date Year.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 99 */
+
+}RTC_DateTypeDef;
+
+/**
+ * @brief RTC Alarm structure definition
+ */
+typedef struct
+{
+ RTC_TimeTypeDef AlarmTime; /*!< Specifies the RTC Alarm Time members */
+
+ uint32_t AlarmMask; /*!< Specifies the RTC Alarm Masks.
+ This parameter can be a value of @ref RTC_AlarmMask_Definitions */
+
+ uint32_t AlarmSubSecondMask; /*!< Specifies the RTC Alarm SubSeconds Masks.
+ This parameter can be a value of @ref RTC_Alarm_Sub_Seconds_Masks_Definitions */
+
+ uint32_t AlarmDateWeekDaySel; /*!< Specifies the RTC Alarm is on Date or WeekDay.
+ This parameter can be a value of @ref RTC_AlarmDateWeekDay_Definitions */
+
+ uint8_t AlarmDateWeekDay; /*!< Specifies the RTC Alarm Date/WeekDay.
+ If the Alarm Date is selected, this parameter must be set to a value in the 1-31 range.
+ If the Alarm WeekDay is selected, this parameter can be a value of @ref RTC_WeekDay_Definitions */
+
+ uint32_t Alarm; /*!< Specifies the alarm .
+ This parameter can be a value of @ref RTC_Alarms_Definitions */
+}RTC_AlarmTypeDef;
+
+/**
+ * @brief Time Handle Structure definition
+ */
+typedef struct
+{
+ RTC_TypeDef *Instance; /*!< Register base address */
+
+ RTC_InitTypeDef Init; /*!< RTC required parameters */
+
+ HAL_LockTypeDef Lock; /*!< RTC locking object */
+
+ __IO HAL_RTCStateTypeDef State; /*!< Time communication state */
+
+}RTC_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RTC_Exported_Constants RTC Exported Constants
+ * @{
+ */
+
+/** @defgroup RTC_Mask_Definition RTC Mask Definition
+ * @{
+ */
+/* Masks Definition */
+#define RTC_TR_RESERVED_MASK ((uint32_t)0x007F7F7F)
+#define RTC_DR_RESERVED_MASK ((uint32_t)0x00FFFF3F)
+#define RTC_INIT_MASK ((uint32_t)0xFFFFFFFF)
+#define RTC_RSF_MASK ((uint32_t)0xFFFFFF5F)
+
+#define RTC_TIMEOUT_VALUE 1000
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Hour_Formats RTC Hour Formats
+ * @{
+ */
+#define RTC_HOURFORMAT_24 ((uint32_t)0x00000000)
+#define RTC_HOURFORMAT_12 ((uint32_t)0x00000040)
+
+#define IS_RTC_HOUR_FORMAT(FORMAT) (((FORMAT) == RTC_HOURFORMAT_12) || \
+ ((FORMAT) == RTC_HOURFORMAT_24))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Output_Polarity_Definitions RTC Output Polarity Definitions
+ * @{
+ */
+#define RTC_OUTPUT_POLARITY_HIGH ((uint32_t)0x00000000)
+#define RTC_OUTPUT_POLARITY_LOW ((uint32_t)0x00100000)
+
+#define IS_RTC_OUTPUT_POL(POL) (((POL) == RTC_OUTPUT_POLARITY_HIGH) || \
+ ((POL) == RTC_OUTPUT_POLARITY_LOW))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Output_Type_ALARM_OUT RTC Output Type ALARM OUT
+ * @{
+ */
+#define RTC_OUTPUT_TYPE_OPENDRAIN ((uint32_t)0x00000000)
+#define RTC_OUTPUT_TYPE_PUSHPULL ((uint32_t)0x00040000)
+
+#define IS_RTC_OUTPUT_TYPE(TYPE) (((TYPE) == RTC_OUTPUT_TYPE_OPENDRAIN) || \
+ ((TYPE) == RTC_OUTPUT_TYPE_PUSHPULL))
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Asynchronous_Predivider RTC Asynchronous Predivider
+ * @{
+ */
+#define IS_RTC_ASYNCH_PREDIV(PREDIV) ((PREDIV) <= (uint32_t)0x7F)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Synchronous_Predivider RTC Synchronous Predivider
+ * @{
+ */
+#define IS_RTC_SYNCH_PREDIV(PREDIV) ((PREDIV) <= (uint32_t)0x7FFF)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Time_Definitions RTC Time Definitions
+ * @{
+ */
+#define IS_RTC_HOUR12(HOUR) (((HOUR) > (uint32_t)0) && ((HOUR) <= (uint32_t)12))
+#define IS_RTC_HOUR24(HOUR) ((HOUR) <= (uint32_t)23)
+#define IS_RTC_MINUTES(MINUTES) ((MINUTES) <= (uint32_t)59)
+#define IS_RTC_SECONDS(SECONDS) ((SECONDS) <= (uint32_t)59)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_AM_PM_Definitions RTC AM PM Definitions
+ * @{
+ */
+#define RTC_HOURFORMAT12_AM ((uint8_t)0x00)
+#define RTC_HOURFORMAT12_PM ((uint8_t)0x40)
+
+#define IS_RTC_HOURFORMAT12(PM) (((PM) == RTC_HOURFORMAT12_AM) || ((PM) == RTC_HOURFORMAT12_PM))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_DayLightSaving_Definitions RTC DayLightSaving Definitions
+ * @{
+ */
+#define RTC_DAYLIGHTSAVING_SUB1H ((uint32_t)0x00020000)
+#define RTC_DAYLIGHTSAVING_ADD1H ((uint32_t)0x00010000)
+#define RTC_DAYLIGHTSAVING_NONE ((uint32_t)0x00000000)
+
+#define IS_RTC_DAYLIGHT_SAVING(SAVE) (((SAVE) == RTC_DAYLIGHTSAVING_SUB1H) || \
+ ((SAVE) == RTC_DAYLIGHTSAVING_ADD1H) || \
+ ((SAVE) == RTC_DAYLIGHTSAVING_NONE))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_StoreOperation_Definitions RTC StoreOperation Definitions
+ * @{
+ */
+#define RTC_STOREOPERATION_RESET ((uint32_t)0x00000000)
+#define RTC_STOREOPERATION_SET ((uint32_t)0x00040000)
+
+#define IS_RTC_STORE_OPERATION(OPERATION) (((OPERATION) == RTC_STOREOPERATION_RESET) || \
+ ((OPERATION) == RTC_STOREOPERATION_SET))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Input_parameter_format_definitions RTC Input parameter format definitions
+ * @{
+ */
+#define FORMAT_BIN ((uint32_t)0x000000000)
+#define FORMAT_BCD ((uint32_t)0x000000001)
+
+#define IS_RTC_FORMAT(FORMAT) (((FORMAT) == FORMAT_BIN) || ((FORMAT) == FORMAT_BCD))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Year_Date_Definitions RTC Year Date Definitions
+ * @{
+ */
+#define IS_RTC_YEAR(YEAR) ((YEAR) <= (uint32_t)99)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Month_Date_Definitions RTC Month Date Definitions
+ * @{
+ */
+
+/* Coded in BCD format */
+#define RTC_MONTH_JANUARY ((uint8_t)0x01)
+#define RTC_MONTH_FEBRUARY ((uint8_t)0x02)
+#define RTC_MONTH_MARCH ((uint8_t)0x03)
+#define RTC_MONTH_APRIL ((uint8_t)0x04)
+#define RTC_MONTH_MAY ((uint8_t)0x05)
+#define RTC_MONTH_JUNE ((uint8_t)0x06)
+#define RTC_MONTH_JULY ((uint8_t)0x07)
+#define RTC_MONTH_AUGUST ((uint8_t)0x08)
+#define RTC_MONTH_SEPTEMBER ((uint8_t)0x09)
+#define RTC_MONTH_OCTOBER ((uint8_t)0x10)
+#define RTC_MONTH_NOVEMBER ((uint8_t)0x11)
+#define RTC_MONTH_DECEMBER ((uint8_t)0x12)
+
+#define IS_RTC_MONTH(MONTH) (((MONTH) >= (uint32_t)1) && ((MONTH) <= (uint32_t)12))
+#define IS_RTC_DATE(DATE) (((DATE) >= (uint32_t)1) && ((DATE) <= (uint32_t)31))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_WeekDay_Definitions RTC WeekDay Definitions
+ * @{
+ */
+#define RTC_WEEKDAY_MONDAY ((uint8_t)0x01)
+#define RTC_WEEKDAY_TUESDAY ((uint8_t)0x02)
+#define RTC_WEEKDAY_WEDNESDAY ((uint8_t)0x03)
+#define RTC_WEEKDAY_THURSDAY ((uint8_t)0x04)
+#define RTC_WEEKDAY_FRIDAY ((uint8_t)0x05)
+#define RTC_WEEKDAY_SATURDAY ((uint8_t)0x06)
+#define RTC_WEEKDAY_SUNDAY ((uint8_t)0x07)
+
+#define IS_RTC_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_WEEKDAY_MONDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_TUESDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_WEDNESDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_THURSDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_FRIDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_SATURDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_SUNDAY))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Alarm_Definitions RTC Alarm Definitions
+ * @{
+ */
+#define IS_RTC_ALARM_DATE_WEEKDAY_DATE(DATE) (((DATE) >(uint32_t) 0) && ((DATE) <= (uint32_t)31))
+#define IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_WEEKDAY_MONDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_TUESDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_WEDNESDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_THURSDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_FRIDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_SATURDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_SUNDAY))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_AlarmDateWeekDay_Definitions RTC AlarmDateWeekDay Definitions
+ * @{
+ */
+#define RTC_ALARMDATEWEEKDAYSEL_DATE ((uint32_t)0x00000000)
+#define RTC_ALARMDATEWEEKDAYSEL_WEEKDAY ((uint32_t)0x40000000)
+
+#define IS_RTC_ALARM_DATE_WEEKDAY_SEL(SEL) (((SEL) == RTC_ALARMDATEWEEKDAYSEL_DATE) || \
+ ((SEL) == RTC_ALARMDATEWEEKDAYSEL_WEEKDAY))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_AlarmMask_Definitions RTC AlarmMask Definitions
+ * @{
+ */
+#define RTC_ALARMMASK_NONE ((uint32_t)0x00000000)
+#define RTC_ALARMMASK_DATEWEEKDAY RTC_ALRMAR_MSK4
+#define RTC_ALARMMASK_HOURS RTC_ALRMAR_MSK3
+#define RTC_ALARMMASK_MINUTES RTC_ALRMAR_MSK2
+#define RTC_ALARMMASK_SECONDS RTC_ALRMAR_MSK1
+#define RTC_ALARMMASK_ALL ((uint32_t)0x80808080)
+
+#define IS_ALARM_MASK(MASK) (((MASK) & 0x7F7F7F7F) == (uint32_t)RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Alarms_Definitions RTC Alarms Definitions
+ * @{
+ */
+#define RTC_ALARM_A RTC_CR_ALRAE
+
+#define IS_ALARM(ALARM) ((ALARM) == RTC_ALARM_A)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Alarm_Sub_Seconds_Value RTC Alarm Sub Seconds Value
+ * @{
+ */
+#define IS_RTC_ALARM_SUB_SECOND_VALUE(VALUE) ((VALUE) <= (uint32_t)0x00007FFF)
+/**
+ * @}
+ */
+
+ /** @defgroup RTC_Alarm_Sub_Seconds_Masks_Definitions RTC Alarm Sub Seconds Masks Definitions
+ * @{
+ */
+#define RTC_ALARMSUBSECONDMASK_ALL ((uint32_t)0x00000000) /*!< All Alarm SS fields are masked.
+ There is no comparison on sub seconds
+ for Alarm */
+#define RTC_ALARMSUBSECONDMASK_SS14_1 ((uint32_t)0x01000000) /*!< SS[14:1] are don't care in Alarm
+ comparison. Only SS[0] is compared. */
+#define RTC_ALARMSUBSECONDMASK_SS14_2 ((uint32_t)0x02000000) /*!< SS[14:2] are don't care in Alarm
+ comparison. Only SS[1:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_3 ((uint32_t)0x03000000) /*!< SS[14:3] are don't care in Alarm
+ comparison. Only SS[2:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_4 ((uint32_t)0x04000000) /*!< SS[14:4] are don't care in Alarm
+ comparison. Only SS[3:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_5 ((uint32_t)0x05000000) /*!< SS[14:5] are don't care in Alarm
+ comparison. Only SS[4:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_6 ((uint32_t)0x06000000) /*!< SS[14:6] are don't care in Alarm
+ comparison. Only SS[5:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_7 ((uint32_t)0x07000000) /*!< SS[14:7] are don't care in Alarm
+ comparison. Only SS[6:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_8 ((uint32_t)0x08000000) /*!< SS[14:8] are don't care in Alarm
+ comparison. Only SS[7:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_9 ((uint32_t)0x09000000) /*!< SS[14:9] are don't care in Alarm
+ comparison. Only SS[8:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_10 ((uint32_t)0x0A000000) /*!< SS[14:10] are don't care in Alarm
+ comparison. Only SS[9:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_11 ((uint32_t)0x0B000000) /*!< SS[14:11] are don't care in Alarm
+ comparison. Only SS[10:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_12 ((uint32_t)0x0C000000) /*!< SS[14:12] are don't care in Alarm
+ comparison.Only SS[11:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_13 ((uint32_t)0x0D000000) /*!< SS[14:13] are don't care in Alarm
+ comparison. Only SS[12:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14 ((uint32_t)0x0E000000) /*!< SS[14] is don't care in Alarm
+ comparison.Only SS[13:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_None ((uint32_t)0x0F000000) /*!< SS[14:0] are compared and must match
+ to activate alarm. */
+
+#define IS_RTC_ALARM_SUB_SECOND_MASK(MASK) (((MASK) == RTC_ALARMSUBSECONDMASK_ALL) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_1) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_2) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_3) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_4) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_5) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_6) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_7) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_8) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_9) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_10) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_11) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_12) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_13) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_None))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Interrupts_Definitions RTC Interrupts Definitions
+ * @{
+ */
+#define RTC_IT_TS ((uint32_t)0x00008000)
+#define RTC_IT_WUT ((uint32_t)0x00004000)
+#define RTC_IT_ALRA ((uint32_t)0x00001000)
+#define RTC_IT_TAMP ((uint32_t)0x00000004) /* Used only to Enable the Tamper Interrupt */
+#define RTC_IT_TAMP1 ((uint32_t)0x00020000)
+#define RTC_IT_TAMP2 ((uint32_t)0x00040000)
+#define RTC_IT_TAMP3 ((uint32_t)0x00080000)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Flags_Definitions RTC Flags Definitions
+ * @{
+ */
+#define RTC_FLAG_RECALPF ((uint32_t)0x00010000)
+#define RTC_FLAG_TAMP3F ((uint32_t)0x00008000)
+#define RTC_FLAG_TAMP2F ((uint32_t)0x00004000)
+#define RTC_FLAG_TAMP1F ((uint32_t)0x00002000)
+#define RTC_FLAG_TSOVF ((uint32_t)0x00001000)
+#define RTC_FLAG_TSF ((uint32_t)0x00000800)
+#define RTC_FLAG_WUTF ((uint32_t)0x00000400)
+#define RTC_FLAG_ALRAF ((uint32_t)0x00000100)
+#define RTC_FLAG_INITF ((uint32_t)0x00000040)
+#define RTC_FLAG_RSF ((uint32_t)0x00000020)
+#define RTC_FLAG_INITS ((uint32_t)0x00000010)
+#define RTC_FLAG_SHPF ((uint32_t)0x00000008)
+#define RTC_FLAG_WUTWF ((uint32_t)0x00000004)
+#define RTC_FLAG_ALRAWF ((uint32_t)0x00000001)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup RTC_Exported_Macros RTC Exported Macros
+ * @{
+ */
+
+/** @brief Reset RTC handle state
+ * @param __HANDLE__: RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RTC_STATE_RESET)
+
+/**
+ * @brief Disable the write protection for RTC registers.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_WRITEPROTECTION_DISABLE(__HANDLE__) \
+ do{ \
+ (__HANDLE__)->Instance->WPR = 0xCA; \
+ (__HANDLE__)->Instance->WPR = 0x53; \
+ } while(0)
+
+/**
+ * @brief Enable the write protection for RTC registers.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_WRITEPROTECTION_ENABLE(__HANDLE__) \
+ do{ \
+ (__HANDLE__)->Instance->WPR = 0xFF; \
+ } while(0)
+
+/**
+ * @brief Enable the RTC ALARMA peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_ALARMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_ALRAE))
+
+/**
+ * @brief Disable the RTC ALARMA peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_ALARMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ALRAE))
+
+/**
+ * @brief Enable the RTC Alarm interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Alarm interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg RTC_IT_ALRA: Alarm A interrupt
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the RTC Alarm interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Alarm interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg RTC_IT_ALRA: Alarm A interrupt
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Check whether the specified RTC Alarm interrupt has occurred or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Alarm interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_ALRA: Alarm A interrupt
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_GET_IT(__HANDLE__, __FLAG__) ((((((__HANDLE__)->Instance->ISR)& ((__FLAG__)>> 4)) & 0x0000FFFF) != RESET)? SET : RESET)
+
+/**
+ * @brief Get the selected RTC Alarm's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Alarm Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_ALRAF
+ * @arg RTC_FLAG_ALRAWF
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+/**
+ * @brief Clear the RTC Alarm's pending flags.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Alarm Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_ALRAF
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0000FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+
+#define RTC_EXTI_LINE_ALARM_EVENT ((uint32_t)0x00020000) /*!< External interrupt line 17 Connected to the RTC Alarm event */
+#define RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT ((uint32_t)0x00080000) /*!< External interrupt line 19 Connected to the RTC Tamper and Time Stamp events */
+#define RTC_EXTI_LINE_WAKEUPTIMER_EVENT ((uint32_t)0x00100000) /*!< External interrupt line 20 Connected to the RTC Wakeup event */
+
+/**
+ * @brief Enable the RTC Exti line.
+ * @param __EXTILINE__: specifies the RTC Exti sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_EXTI_LINE_ALARM_EVENT
+ * @arg RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT
+ * @arg RTC_EXTI_LINE_WAKEUPTIMER_EVENT
+ * @retval None
+ */
+#define __HAL_RTC_EXTI_ENABLE_IT(__EXTILINE__) (EXTI->IMR |= (__EXTILINE__))
+
+/* alias define maintained for legacy */
+#define __HAL_RTC_ENABLE_IT __HAL_RTC_EXTI_ENABLE_IT
+
+/**
+ * @brief Disable the RTC Exti line.
+ * @param __EXTILINE__: specifies the RTC Exti sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_EXTI_LINE_ALARM_EVENT
+ * @arg RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT
+ * @arg RTC_EXTI_LINE_WAKEUPTIMER_EVENT
+ * @retval None
+ */
+#define __HAL_RTC_EXTI_DISABLE_IT(__EXTILINE__) (EXTI->IMR &= ~(__EXTILINE__))
+
+/* alias define maintained for legacy */
+#define __HAL_RTC_DISABLE_IT __HAL_RTC_EXTI_DISABLE_IT
+
+/**
+ * @brief Generates a Software interrupt on selected EXTI line.
+ * @param __EXTILINE__: specifies the RTC Exti sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_EXTI_LINE_ALARM_EVENT
+ * @arg RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT
+ * @arg RTC_EXTI_LINE_WAKEUPTIMER_EVENT
+ * @retval None
+ */
+#define __HAL_RTC_EXTI_GENERATE_SWIT(__EXTILINE__) (EXTI->SWIER |= (__EXTILINE__))
+
+/**
+ * @brief Clear the RTC Exti flags.
+ * @param __FLAG__: specifies the RTC Exti sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_EXTI_LINE_ALARM_EVENT
+ * @arg RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT
+ * @arg RTC_EXTI_LINE_WAKEUPTIMER_EVENT
+ * @retval None
+ */
+#define __HAL_RTC_EXTI_CLEAR_FLAG(__FLAG__) (EXTI->PR = (__FLAG__))
+
+/* alias define maintained for legacy */
+#define __HAL_RTC_CLEAR_FLAG __HAL_RTC_EXTI_CLEAR_FLAG
+
+/**
+ * @}
+ */
+
+/* Include RTC HAL Extension module */
+#include "stm32f0xx_hal_rtc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup RTC_Exported_Functions RTC Exported Functions
+ * @{
+ */
+
+/** @addtogroup RTC_Exported_Functions_Group1
+ * @{
+ */
+
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc);
+void HAL_RTC_MspInit(RTC_HandleTypeDef *hrtc);
+void HAL_RTC_MspDeInit(RTC_HandleTypeDef *hrtc);
+/**
+ * @}
+ */
+
+/** @addtogroup RTC_Exported_Functions_Group2
+ * @{
+ */
+
+/* RTC Time and Date functions ************************************************/
+HAL_StatusTypeDef HAL_RTC_SetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_GetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_GetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format);
+/**
+ * @}
+ */
+
+/** @addtogroup RTC_Exported_Functions_Group3
+ * @{
+ */
+/* RTC Alarm functions ********************************************************/
+HAL_StatusTypeDef HAL_RTC_SetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_SetAlarm_IT(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_DeactivateAlarm(RTC_HandleTypeDef *hrtc, uint32_t Alarm);
+HAL_StatusTypeDef HAL_RTC_GetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Alarm, uint32_t Format);
+void HAL_RTC_AlarmIRQHandler(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTC_PollForAlarmAEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc);
+/**
+ * @}
+ */
+
+/** @addtogroup RTC_Exported_Functions_Group4
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_RTC_WaitForSynchro(RTC_HandleTypeDef* hrtc);
+/**
+ * @}
+ */
+
+/** @addtogroup RTC_Exported_Functions_Group5
+ * @{
+ */
+/* Peripheral State functions *************************************************/
+HAL_RTCStateTypeDef HAL_RTC_GetState(RTC_HandleTypeDef *hrtc);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup RTC_Private_Functions
+ * @{
+ */
+HAL_StatusTypeDef RTC_EnterInitMode(RTC_HandleTypeDef* hrtc);
+uint8_t RTC_ByteToBcd2(uint8_t Value);
+uint8_t RTC_Bcd2ToByte(uint8_t Value);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_RTC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/include/stm32f0xx_hal_rtc_ex.h b/f0/include/stm32f0xx_hal_rtc_ex.h
new file mode 100755
index 0000000000000000000000000000000000000000..397682228894454382d331fc02adc75222b888ca
--- /dev/null
+++ b/f0/include/stm32f0xx_hal_rtc_ex.h
@@ -0,0 +1,708 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_rtc_ex.h
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief Header file of RTC HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_RTC_EX_H
+#define __STM32F0xx_HAL_RTC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RTCEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup RTCEx_Exported_Types RTCEx Exported Types
+ * @{
+ */
+
+/**
+ * @brief RTC Tamper structure definition
+ */
+typedef struct
+{
+ uint32_t Tamper; /*!< Specifies the Tamper Pin.
+ This parameter can be a value of @ref RTCEx_Tamper_Pins_Definitions */
+
+ uint32_t Trigger; /*!< Specifies the Tamper Trigger.
+ This parameter can be a value of @ref RTCEx_Tamper_Trigger_Definitions */
+
+ uint32_t Filter; /*!< Specifies the RTC Filter Tamper.
+ This parameter can be a value of @ref RTCEx_Tamper_Filter_Definitions */
+
+ uint32_t SamplingFrequency; /*!< Specifies the sampling frequency.
+ This parameter can be a value of @ref RTCEx_Tamper_Sampling_Frequencies_Definitions */
+
+ uint32_t PrechargeDuration; /*!< Specifies the Precharge Duration .
+ This parameter can be a value of @ref RTCEx_Tamper_Pin_Precharge_Duration_Definitions */
+
+ uint32_t TamperPullUp; /*!< Specifies the Tamper PullUp .
+ This parameter can be a value of @ref RTCEx_Tamper_Pull_UP_Definitions */
+
+ uint32_t TimeStampOnTamperDetection; /*!< Specifies the TimeStampOnTamperDetection.
+ This parameter can be a value of @ref RTCEx_Tamper_TimeStampOnTamperDetection_Definitions */
+}RTC_TamperTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RTCEx_Exported_Constants RTCEx Exported Constants
+ * @{
+ */
+
+/** @defgroup RTCEx_Output_selection_Definitions RTCEx Output Selection Definition
+ * @{
+ */
+#define RTC_OUTPUT_DISABLE ((uint32_t)0x00000000)
+#define RTC_OUTPUT_ALARMA ((uint32_t)0x00200000)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
+#define RTC_OUTPUT_WAKEUP ((uint32_t)0x00600000)
+#endif
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
+#define IS_RTC_OUTPUT(OUTPUT) (((OUTPUT) == RTC_OUTPUT_DISABLE) || \
+ ((OUTPUT) == RTC_OUTPUT_ALARMA) || \
+ ((OUTPUT) == RTC_OUTPUT_WAKEUP))
+#else
+#define IS_RTC_OUTPUT(OUTPUT) (((OUTPUT) == RTC_OUTPUT_DISABLE) || \
+ ((OUTPUT) == RTC_OUTPUT_ALARMA))
+#endif
+/**
+ * @}
+ */
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F030xC) && !defined(STM32F070x6) && !defined(STM32F070xB)
+/** @defgroup RTCEx_Backup_Registers_Definitions RTCEx Backup Registers Definition
+ * @{
+ */
+#define RTC_BKP_DR0 ((uint32_t)0x00000000)
+#define RTC_BKP_DR1 ((uint32_t)0x00000001)
+#define RTC_BKP_DR2 ((uint32_t)0x00000002)
+#define RTC_BKP_DR3 ((uint32_t)0x00000003)
+#define RTC_BKP_DR4 ((uint32_t)0x00000004)
+
+#define IS_RTC_BKP(BKP) ((BKP) < (uint32_t) RTC_BKP_NUMBER)
+/**
+ * @}
+ */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F030xC) && !defined(STM32F070x6) && !defined(STM32F070xB) */
+
+/** @defgroup RTCEx_Time_Stamp_Edges_definitions RTCEx Time Stamp Edges definition
+ * @{
+ */
+#define RTC_TIMESTAMPEDGE_RISING ((uint32_t)0x00000000)
+#define RTC_TIMESTAMPEDGE_FALLING ((uint32_t)0x00000008)
+
+#define IS_TIMESTAMP_EDGE(EDGE) (((EDGE) == RTC_TIMESTAMPEDGE_RISING) || \
+ ((EDGE) == RTC_TIMESTAMPEDGE_FALLING))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Pins_Definitions RTCEx Tamper Pins Definition
+ * @{
+ */
+#define RTC_TAMPER_1 RTC_TAFCR_TAMP1E
+#define RTC_TAMPER_2 RTC_TAFCR_TAMP2E
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#define RTC_TAMPER_3 RTC_TAFCR_TAMP3E
+#endif
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#define IS_TAMPER(TAMPER) (((TAMPER) == RTC_TAMPER_1) || \
+ ((TAMPER) == RTC_TAMPER_2) || \
+ ((TAMPER) == RTC_TAMPER_3))
+#else
+#define IS_TAMPER(TAMPER) (((TAMPER) == RTC_TAMPER_1) || \
+ ((TAMPER) == RTC_TAMPER_2))
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_TimeStamp_Pin_Selections RTCEx TimeStamp Pin Selection
+ * @{
+ */
+#define RTC_TIMESTAMPPIN_PC13 ((uint32_t)0x00000000)
+
+#define IS_RTC_TIMESTAMP_PIN(PIN) (((PIN) == RTC_TIMESTAMPPIN_PC13))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Trigger_Definitions RTCEx Tamper Trigger Definition
+ * @{
+ */
+#define RTC_TAMPERTRIGGER_RISINGEDGE ((uint32_t)0x00000000)
+#define RTC_TAMPERTRIGGER_FALLINGEDGE ((uint32_t)0x00000002)
+#define RTC_TAMPERTRIGGER_LOWLEVEL RTC_TAMPERTRIGGER_RISINGEDGE
+#define RTC_TAMPERTRIGGER_HIGHLEVEL RTC_TAMPERTRIGGER_FALLINGEDGE
+
+#define IS_TAMPER_TRIGGER(TRIGGER) (((TRIGGER) == RTC_TAMPERTRIGGER_RISINGEDGE) || \
+ ((TRIGGER) == RTC_TAMPERTRIGGER_FALLINGEDGE) || \
+ ((TRIGGER) == RTC_TAMPERTRIGGER_LOWLEVEL) || \
+ ((TRIGGER) == RTC_TAMPERTRIGGER_HIGHLEVEL))
+
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Filter_Definitions RTCEx Tamper Filter Definition
+ * @{
+ */
+#define RTC_TAMPERFILTER_DISABLE ((uint32_t)0x00000000) /*!< Tamper filter is disabled */
+
+#define RTC_TAMPERFILTER_2SAMPLE ((uint32_t)0x00000800) /*!< Tamper is activated after 2
+ consecutive samples at the active level */
+#define RTC_TAMPERFILTER_4SAMPLE ((uint32_t)0x00001000) /*!< Tamper is activated after 4
+ consecutive samples at the active level */
+#define RTC_TAMPERFILTER_8SAMPLE ((uint32_t)0x00001800) /*!< Tamper is activated after 8
+ consecutive samples at the active level. */
+
+#define IS_TAMPER_FILTER(FILTER) (((FILTER) == RTC_TAMPERFILTER_DISABLE) || \
+ ((FILTER) == RTC_TAMPERFILTER_2SAMPLE) || \
+ ((FILTER) == RTC_TAMPERFILTER_4SAMPLE) || \
+ ((FILTER) == RTC_TAMPERFILTER_8SAMPLE))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Sampling_Frequencies_Definitions RTCEx Tamper Sampling Frequencies Definition
+ * @{
+ */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768 ((uint32_t)0x00000000) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 32768 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384 ((uint32_t)0x00000100) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 16384 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192 ((uint32_t)0x00000200) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 8192 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096 ((uint32_t)0x00000300) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 4096 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048 ((uint32_t)0x00000400) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 2048 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024 ((uint32_t)0x00000500) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 1024 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512 ((uint32_t)0x00000600) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 512 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256 ((uint32_t)0x00000700) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 256 */
+
+#define IS_TAMPER_SAMPLING_FREQ(FREQ) (((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768)|| \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384)|| \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Pin_Precharge_Duration_Definitions RTCEx Tamper Pin Precharge Duration Definition
+ * @{
+ */
+#define RTC_TAMPERPRECHARGEDURATION_1RTCCLK ((uint32_t)0x00000000) /*!< Tamper pins are pre-charged before
+ sampling during 1 RTCCLK cycle */
+#define RTC_TAMPERPRECHARGEDURATION_2RTCCLK ((uint32_t)0x00002000) /*!< Tamper pins are pre-charged before
+ sampling during 2 RTCCLK cycles */
+#define RTC_TAMPERPRECHARGEDURATION_4RTCCLK ((uint32_t)0x00004000) /*!< Tamper pins are pre-charged before
+ sampling during 4 RTCCLK cycles */
+#define RTC_TAMPERPRECHARGEDURATION_8RTCCLK ((uint32_t)0x00006000) /*!< Tamper pins are pre-charged before
+ sampling during 8 RTCCLK cycles */
+
+#define IS_TAMPER_PRECHARGE_DURATION(DURATION) (((DURATION) == RTC_TAMPERPRECHARGEDURATION_1RTCCLK) || \
+ ((DURATION) == RTC_TAMPERPRECHARGEDURATION_2RTCCLK) || \
+ ((DURATION) == RTC_TAMPERPRECHARGEDURATION_4RTCCLK) || \
+ ((DURATION) == RTC_TAMPERPRECHARGEDURATION_8RTCCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_TimeStampOnTamperDetection_Definitions RTCEx Tamper TimeStampOnTamperDetection Definition
+ * @{
+ */
+#define RTC_TIMESTAMPONTAMPERDETECTION_ENABLE ((uint32_t)RTC_TAFCR_TAMPTS) /*!< TimeStamp on Tamper Detection event saved */
+#define RTC_TIMESTAMPONTAMPERDETECTION_DISABLE ((uint32_t)0x00000000) /*!< TimeStamp on Tamper Detection event is not saved */
+
+#define IS_TAMPER_TIMESTAMPONTAMPER_DETECTION(DETECTION) (((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_ENABLE) || \
+ ((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Pull_UP_Definitions RTCEx Tamper Pull UP Definition
+ * @{
+ */
+#define RTC_TAMPER_PULLUP_ENABLE ((uint32_t)0x00000000) /*!< TimeStamp on Tamper Detection event saved */
+#define RTC_TAMPER_PULLUP_DISABLE ((uint32_t)RTC_TAFCR_TAMPPUDIS) /*!< TimeStamp on Tamper Detection event is not saved */
+
+#define IS_TAMPER_PULLUP_STATE(STATE) (((STATE) == RTC_TAMPER_PULLUP_ENABLE) || \
+ ((STATE) == RTC_TAMPER_PULLUP_DISABLE))
+/**
+ * @}
+ */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
+/** @defgroup RTCEx_Wakeup_Timer_Definitions RTCEx Wakeup Timer Definition
+ * @{
+ */
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV16 ((uint32_t)0x00000000)
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV8 ((uint32_t)0x00000001)
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV4 ((uint32_t)0x00000002)
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV2 ((uint32_t)0x00000003)
+#define RTC_WAKEUPCLOCK_CK_SPRE_16BITS ((uint32_t)0x00000004)
+#define RTC_WAKEUPCLOCK_CK_SPRE_17BITS ((uint32_t)0x00000006)
+
+#define IS_WAKEUP_CLOCK(CLOCK) (((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV16) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV8) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV4) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV2) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_16BITS) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_17BITS))
+
+#define IS_WAKEUP_COUNTER(COUNTER) ((COUNTER) <= 0xFFFF)
+/**
+ * @}
+ */
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
+
+/** @defgroup RTCEx_Smooth_calib_period_Definitions RTCEx Smooth calib period Definition
+ * @{
+ */
+#define RTC_SMOOTHCALIB_PERIOD_32SEC ((uint32_t)0x00000000) /*!< If RTCCLK = 32768 Hz, Smooth calibation
+ period is 32s, else 2exp20 RTCCLK seconds */
+#define RTC_SMOOTHCALIB_PERIOD_16SEC ((uint32_t)0x00002000) /*!< If RTCCLK = 32768 Hz, Smooth calibation
+ period is 16s, else 2exp19 RTCCLK seconds */
+#define RTC_SMOOTHCALIB_PERIOD_8SEC ((uint32_t)0x00004000) /*!< If RTCCLK = 32768 Hz, Smooth calibation
+ period is 8s, else 2exp18 RTCCLK seconds */
+
+#define IS_RTC_SMOOTH_CALIB_PERIOD(PERIOD) (((PERIOD) == RTC_SMOOTHCALIB_PERIOD_32SEC) || \
+ ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_16SEC) || \
+ ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_8SEC))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Smooth_calib_Plus_pulses_Definitions RTCEx Smooth calib Plus pulses Definition
+ * @{
+ */
+#define RTC_SMOOTHCALIB_PLUSPULSES_SET ((uint32_t)0x00008000) /*!< The number of RTCCLK pulses added
+ during a X -second window = Y - CALM[8:0]
+ with Y = 512, 256, 128 when X = 32, 16, 8 */
+#define RTC_SMOOTHCALIB_PLUSPULSES_RESET ((uint32_t)0x00000000) /*!< The number of RTCCLK pulses subbstited
+ during a 32-second window = CALM[8:0] */
+
+#define IS_RTC_SMOOTH_CALIB_PLUS(PLUS) (((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_SET) || \
+ ((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_RESET))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Smooth_calib_Minus_pulses_Definitions RTCEx Smooth calib Minus pulses Definition
+ * @{
+ */
+#define IS_RTC_SMOOTH_CALIB_MINUS(VALUE) ((VALUE) <= 0x000001FF)
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Add_1_Second_Parameter_Definition RTCEx Add 1 Second Parameter Definition
+ * @{
+ */
+#define RTC_SHIFTADD1S_RESET ((uint32_t)0x00000000)
+#define RTC_SHIFTADD1S_SET ((uint32_t)0x80000000)
+
+#define IS_RTC_SHIFT_ADD1S(SEL) (((SEL) == RTC_SHIFTADD1S_RESET) || \
+ ((SEL) == RTC_SHIFTADD1S_SET))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Substract_Fraction_Of_Second_Value RTCEx Substract Fraction Of Second Value
+ * @{
+ */
+#define IS_RTC_SHIFT_SUBFS(FS) ((FS) <= 0x00007FFF)
+/**
+ * @}
+ */
+
+ /** @defgroup RTCEx_Calib_Output_selection_Definitions RTCEx Calib Output selection Definition
+ * @{
+ */
+#define RTC_CALIBOUTPUT_512HZ ((uint32_t)0x00000000)
+#define RTC_CALIBOUTPUT_1HZ ((uint32_t)0x00080000)
+
+#define IS_RTC_CALIB_OUTPUT(OUTPUT) (((OUTPUT) == RTC_CALIBOUTPUT_512HZ) || \
+ ((OUTPUT) == RTC_CALIBOUTPUT_1HZ))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup RTCEx_Exported_Macros RTCEx Exported Macros
+ * @{
+ */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
+/**
+ * @brief Enable the RTC WakeUp Timer peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_WUTE))
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
+
+/**
+ * @brief Enable the RTC TimeStamp peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_TSE))
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
+/**
+ * @brief Disable the RTC WakeUp Timer peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE))
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
+
+/**
+ * @brief Disable the RTC TimeStamp peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TSE))
+
+/**
+ * @brief Enable the RTC calibration output.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_COE))
+
+/**
+ * @brief Disable the calibration output.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_COE))
+
+/**
+ * @brief Enable the clock reference detection.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_REFCKON))
+
+/**
+ * @brief Disable the clock reference detection.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_REFCKON))
+
+/**
+ * @brief Enable the RTC TimeStamp interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_TS: TimeStamp interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
+/**
+ * @brief Enable the RTC WakeUpTimer interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_WUT: WakeUpTimer A interrupt
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
+
+/**
+ * @brief Disable the RTC TimeStamp interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_TS: TimeStamp interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
+/**
+ * @brief Disable the RTC WakeUpTimer interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_WUT: WakeUpTimer A interrupt
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
+
+/**
+ * @brief Check whether the specified RTC Tamper interrupt has occurred or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Tamper interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_TAMP1
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & ((__FLAG__)>> 4)) != RESET)? SET : RESET)
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
+/**
+ * @brief Check whether the specified RTC WakeUpTimer interrupt has occurred or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_WUT: WakeUpTimer A interrupt
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & ((__FLAG__)>> 4)) != RESET)? SET : RESET)
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
+
+/**
+ * @brief Check whether the specified RTC TimeStamp interrupt has occurred or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC TimeStamp interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_TS: TimeStamp interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & ((__FLAG__)>> 4)) != RESET)? SET : RESET)
+
+/**
+ * @brief Get the selected RTC TimeStamp's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC TimeStamp Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_TSF
+ * @arg RTC_FLAG_TSOVF
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
+/**
+ * @brief Get the selected RTC WakeUpTimer's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC WakeUpTimer Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_WUTF
+ * @arg RTC_FLAG_WUTWF
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
+
+/**
+ * @brief Get the selected RTC Tamper's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_TAMP1F
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+/**
+ * @brief Get the selected RTC shift operation's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC shift operation Flag is pending or not.
+ * This parameter can be:
+ * @arg RTC_FLAG_SHPF
+ * @retval None
+ */
+#define __HAL_RTC_SHIFT_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+/**
+ * @brief Clear the RTC Time Stamp's pending flags.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Alarm Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_TSF
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0000FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+/**
+ * @brief Clear the RTC Tamper's pending flags.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_TAMP1F
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0000FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
+/**
+ * @brief Clear the RTC Wake Up timer's pending flags.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_WUTF
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0000FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup RTCEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup RTCEx_Exported_Functions_Group1
+ * @{
+ */
+
+/* RTC TimeStamp and Tamper functions *****************************************/
+HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
+HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, RTC_DateTypeDef *sTimeStampDate, uint32_t Format);
+
+HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);
+HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper);
+void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc);
+
+void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc);
+void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc);
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
+void HAL_RTCEx_Tamper3EventCallback(RTC_HandleTypeDef *hrtc);
+#endif
+void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper3Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+#endif
+/**
+ * @}
+ */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
+/** @addtogroup RTCEx_Exported_Functions_Group2
+ * @{
+ */
+
+/* RTC Wake-up functions ******************************************************/
+HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
+HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
+uint32_t HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc);
+uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc);
+void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc);
+void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+#endif
+/**
+ * @}
+ */
+
+/** @addtogroup RTCEx_Exported_Functions_Group3
+ * @{
+ */
+
+/* Extension Control functions ************************************************/
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F030xC) && !defined(STM32F070x6) && !defined(STM32F070xB)
+void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data);
+uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister);
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F030xC) && !defined(STM32F070x6) && !defined(STM32F070xB) */
+
+HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmouthCalibMinusPulsesValue);
+HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS);
+HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc);
+/**
+ * @}
+ */
+
+/* Extension RTC features functions *******************************************/
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_RTC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/include/stm32f0xx_hal_smartcard.h b/f0/include/stm32f0xx_hal_smartcard.h
new file mode 100755
index 0000000000000000000000000000000000000000..ba18bdc18740a8969f77f6307a0efcdd1a3e146f
--- /dev/null
+++ b/f0/include/stm32f0xx_hal_smartcard.h
@@ -0,0 +1,818 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_smartcard.h
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief Header file of SMARTCARD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_SMARTCARD_H
+#define __STM32F0xx_HAL_SMARTCARD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SMARTCARD
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup SMARTCARD_Exported_Types SMARTCARD Exported Types
+ * @{
+ */
+
+
+/**
+ * @brief SMARTCARD Init Structure definition
+ */
+typedef struct
+{
+ uint32_t BaudRate; /*!< Configures the SmartCard communication baud rate.
+ The baud rate register is computed using the following formula:
+ Baud Rate Register = ((PCLKx) / ((hsmartcard->Init.BaudRate))) */
+
+ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter @ref SMARTCARD_Word_Length can only be set to 9 (8 data + 1 parity bits). */
+
+ uint32_t StopBits; /*!< Specifies the number of stop bits @ref SMARTCARD_Stop_Bits.
+ Only 1.5 stop bits are authorized in SmartCard mode. */
+
+ uint16_t Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref SMARTCARD_Parity
+ @note The parity is enabled by default (PCE is forced to 1).
+ Since the WordLength is forced to 8 bits + parity, M is
+ forced to 1 and the parity bit is the 9th bit. */
+
+ uint16_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref SMARTCARD_Mode */
+
+ uint16_t CLKPolarity; /*!< Specifies the steady state of the serial clock.
+ This parameter can be a value of @ref SMARTCARD_Clock_Polarity */
+
+ uint16_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made.
+ This parameter can be a value of @ref SMARTCARD_Clock_Phase */
+
+ uint16_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted
+ data bit (MSB) has to be output on the SCLK pin in synchronous mode.
+ This parameter can be a value of @ref SMARTCARD_Last_Bit */
+
+ uint16_t OneBitSampling; /*!< Specifies whether a single sample or three samples' majority vote is selected.
+ Selecting the single sample method increases the receiver tolerance to clock
+ deviations. This parameter can be a value of @ref SMARTCARD_OneBit_Sampling. */
+
+ uint8_t Prescaler; /*!< Specifies the SmartCard Prescaler */
+
+ uint8_t GuardTime; /*!< Specifies the SmartCard Guard Time */
+
+ uint16_t NACKEnable; /*!< Specifies whether the SmartCard NACK transmission is enabled
+ in case of parity error.
+ This parameter can be a value of @ref SMARTCARD_NACK_Enable */
+
+ uint32_t TimeOutEnable; /*!< Specifies whether the receiver timeout is enabled.
+ This parameter can be a value of @ref SMARTCARD_Timeout_Enable*/
+
+ uint32_t TimeOutValue; /*!< Specifies the receiver time out value in number of baud blocks:
+ it is used to implement the Character Wait Time (CWT) and
+ Block Wait Time (BWT). It is coded over 24 bits. */
+
+ uint8_t BlockLength; /*!< Specifies the SmartCard Block Length in T=1 Reception mode.
+ This parameter can be any value from 0x0 to 0xFF */
+
+ uint8_t AutoRetryCount; /*!< Specifies the SmartCard auto-retry count (number of retries in
+ receive and transmit mode). When set to 0, retransmission is
+ disabled. Otherwise, its maximum value is 7 (before signalling
+ an error) */
+
+}SMARTCARD_InitTypeDef;
+
+/**
+ * @brief SMARTCARD advanced features initalization structure definition
+ */
+typedef struct
+{
+ uint32_t AdvFeatureInit; /*!< Specifies which advanced SMARTCARD features is initialized. Several
+ advanced features may be initialized at the same time. This parameter
+ can be a value of @ref SMARTCARD_Advanced_Features_Initialization_Type */
+
+ uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted.
+ This parameter can be a value of @ref SMARTCARD_Tx_Inv */
+
+ uint32_t RxPinLevelInvert; /*!< Specifies whether the RX pin active level is inverted.
+ This parameter can be a value of @ref SMARTCARD_Rx_Inv */
+
+ uint32_t DataInvert; /*!< Specifies whether data are inverted (positive/direct logic
+ vs negative/inverted logic).
+ This parameter can be a value of @ref SMARTCARD_Data_Inv */
+
+ uint32_t Swap; /*!< Specifies whether TX and RX pins are swapped.
+ This parameter can be a value of @ref SMARTCARD_Rx_Tx_Swap */
+
+ uint32_t OverrunDisable; /*!< Specifies whether the reception overrun detection is disabled.
+ This parameter can be a value of @ref SMARTCARD_Overrun_Disable */
+
+ uint32_t DMADisableonRxError; /*!< Specifies whether the DMA is disabled in case of reception error.
+ This parameter can be a value of @ref SMARTCARD_DMA_Disable_on_Rx_Error */
+
+ uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line.
+ This parameter can be a value of @ref SMARTCARD_MSB_First */
+}SMARTCARD_AdvFeatureInitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_SMARTCARD_STATE_RESET = 0x00, /*!< Peripheral is not initialized */
+ HAL_SMARTCARD_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_SMARTCARD_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_SMARTCARD_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
+ HAL_SMARTCARD_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
+ HAL_SMARTCARD_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */
+ HAL_SMARTCARD_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_SMARTCARD_STATE_ERROR = 0x04 /*!< Error */
+}HAL_SMARTCARD_StateTypeDef;
+
+/**
+ * @brief SMARTCARD clock sources
+ */
+typedef enum
+{
+ SMARTCARD_CLOCKSOURCE_PCLK1 = 0x00, /*!< PCLK1 clock source */
+ SMARTCARD_CLOCKSOURCE_HSI = 0x02, /*!< HSI clock source */
+ SMARTCARD_CLOCKSOURCE_SYSCLK = 0x04, /*!< SYSCLK clock source */
+ SMARTCARD_CLOCKSOURCE_LSE = 0x08, /*!< LSE clock source */
+ SMARTCARD_CLOCKSOURCE_UNDEFINED = 0x10 /*!< undefined clock source */
+}SMARTCARD_ClockSourceTypeDef;
+
+/**
+ * @brief SMARTCARD handle Structure definition
+ */
+typedef struct
+{
+ USART_TypeDef *Instance; /*!< USART registers base address */
+
+ SMARTCARD_InitTypeDef Init; /*!< SmartCard communication parameters */
+
+ SMARTCARD_AdvFeatureInitTypeDef AdvancedInit; /*!< SmartCard advanced features initialization parameters */
+
+ uint8_t *pTxBuffPtr; /*!< Pointer to SmartCard Tx transfer Buffer */
+
+ uint16_t TxXferSize; /*!< SmartCard Tx Transfer size */
+
+ uint16_t TxXferCount; /*!< SmartCard Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /*!< Pointer to SmartCard Rx transfer Buffer */
+
+ uint16_t RxXferSize; /*!< SmartCard Rx Transfer size */
+
+ uint16_t RxXferCount; /*!< SmartCard Rx Transfer Counter */
+
+ DMA_HandleTypeDef *hdmatx; /*!< SmartCard Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< SmartCard Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< Locking object */
+
+ HAL_SMARTCARD_StateTypeDef State; /*!< SmartCard communication state */
+
+ __IO uint32_t ErrorCode; /*!< SmartCard Error code
+ This parameter can be a value of @ref SMARTCARD_Error */
+
+}SMARTCARD_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup SMARTCARD_Exported_Constants SMARTCARD Exported constants
+ * @{
+ */
+
+/** @defgroup SMARTCARD_Error SMARTCARD Error
+ * @{
+ */
+#define HAL_SMARTCARD_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_SMARTCARD_ERROR_PE ((uint32_t)0x00000001) /*!< Parity error */
+#define HAL_SMARTCARD_ERROR_NE ((uint32_t)0x00000002) /*!< Noise error */
+#define HAL_SMARTCARD_ERROR_FE ((uint32_t)0x00000004) /*!< frame error */
+#define HAL_SMARTCARD_ERROR_ORE ((uint32_t)0x00000008) /*!< Overrun error */
+#define HAL_SMARTCARD_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */
+#define HAL_SMARTCARD_ERROR_RTO ((uint32_t)0x00000020) /*!< Receiver TimeOut error */
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Word_Length SMARTCARD Word Length
+ * @{
+ */
+#define SMARTCARD_WORDLENGTH_9B ((uint32_t)USART_CR1_M0)
+#define IS_SMARTCARD_WORD_LENGTH(LENGTH) ((LENGTH) == SMARTCARD_WORDLENGTH_9B)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Stop_Bits SMARTCARD Stop Bits
+ * @{
+ */
+#define SMARTCARD_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP))
+#define IS_SMARTCARD_STOPBITS(STOPBITS) ((STOPBITS) == SMARTCARD_STOPBITS_1_5)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Parity SMARTCARD Parity
+ * @{
+ */
+#define SMARTCARD_PARITY_EVEN ((uint16_t)USART_CR1_PCE)
+#define SMARTCARD_PARITY_ODD ((uint16_t)(USART_CR1_PCE | USART_CR1_PS))
+#define IS_SMARTCARD_PARITY(PARITY) (((PARITY) == SMARTCARD_PARITY_EVEN) || \
+ ((PARITY) == SMARTCARD_PARITY_ODD))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Mode SMARTCARD Transfer Mode
+ * @{
+ */
+#define SMARTCARD_MODE_RX ((uint16_t)USART_CR1_RE)
+#define SMARTCARD_MODE_TX ((uint16_t)USART_CR1_TE)
+#define SMARTCARD_MODE_TX_RX ((uint16_t)(USART_CR1_TE |USART_CR1_RE))
+#define IS_SMARTCARD_MODE(MODE) ((((MODE) & (uint16_t)0xFFF3) == 0x00) && ((MODE) != (uint16_t)0x00))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Clock_Polarity SMARTCARD Clock Polarity
+ * @{
+ */
+#define SMARTCARD_POLARITY_LOW ((uint16_t)0x0000)
+#define SMARTCARD_POLARITY_HIGH ((uint16_t)USART_CR2_CPOL)
+#define IS_SMARTCARD_POLARITY(CPOL) (((CPOL) == SMARTCARD_POLARITY_LOW) || ((CPOL) == SMARTCARD_POLARITY_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Clock_Phase SMARTCARD Clock Phase
+ * @{
+ */
+#define SMARTCARD_PHASE_1EDGE ((uint16_t)0x0000)
+#define SMARTCARD_PHASE_2EDGE ((uint16_t)USART_CR2_CPHA)
+#define IS_SMARTCARD_PHASE(CPHA) (((CPHA) == SMARTCARD_PHASE_1EDGE) || ((CPHA) == SMARTCARD_PHASE_2EDGE))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Last_Bit SMARTCARD Last Bit
+ * @{
+ */
+#define SMARTCARD_LASTBIT_DISABLED ((uint16_t)0x0000)
+#define SMARTCARD_LASTBIT_ENABLED ((uint16_t)USART_CR2_LBCL)
+#define IS_SMARTCARD_LASTBIT(LASTBIT) (((LASTBIT) == SMARTCARD_LASTBIT_DISABLED) || \
+ ((LASTBIT) == SMARTCARD_LASTBIT_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_OneBit_Sampling SMARTCARD One Bit Sampling Method
+ * @{
+ */
+#define SMARTCARD_ONEBIT_SAMPLING_DISABLED ((uint16_t)0x0000)
+#define SMARTCARD_ONEBIT_SAMPLING_ENABLED ((uint16_t)USART_CR3_ONEBIT)
+#define IS_SMARTCARD_ONEBIT_SAMPLING(ONEBIT) (((ONEBIT) == SMARTCARD_ONEBIT_SAMPLING_DISABLED) || \
+ ((ONEBIT) == SMARTCARD_ONEBIT_SAMPLING_ENABLED))
+/**
+ * @}
+ */
+
+
+/** @defgroup SMARTCARD_NACK_Enable SMARTCARD NACK Enable
+ * @{
+ */
+#define SMARTCARD_NACK_ENABLED ((uint16_t)USART_CR3_NACK)
+#define SMARTCARD_NACK_DISABLED ((uint16_t)0x0000)
+#define IS_SMARTCARD_NACK(NACK) (((NACK) == SMARTCARD_NACK_ENABLED) || \
+ ((NACK) == SMARTCARD_NACK_DISABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Timeout_Enable SMARTCARD Timeout Enable
+ * @{
+ */
+#define SMARTCARD_TIMEOUT_DISABLED ((uint32_t)0x00000000)
+#define SMARTCARD_TIMEOUT_ENABLED ((uint32_t)USART_CR2_RTOEN)
+#define IS_SMARTCARD_TIMEOUT(TIMEOUT) (((TIMEOUT) == SMARTCARD_TIMEOUT_DISABLED) || \
+ ((TIMEOUT) == SMARTCARD_TIMEOUT_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Advanced_Features_Initialization_Type SMARTCARD advanced feature initialization type
+ * @{
+ */
+#define SMARTCARD_ADVFEATURE_NO_INIT ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_TXINVERT_INIT ((uint32_t)0x00000001)
+#define SMARTCARD_ADVFEATURE_RXINVERT_INIT ((uint32_t)0x00000002)
+#define SMARTCARD_ADVFEATURE_DATAINVERT_INIT ((uint32_t)0x00000004)
+#define SMARTCARD_ADVFEATURE_SWAP_INIT ((uint32_t)0x00000008)
+#define SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT ((uint32_t)0x00000010)
+#define SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT ((uint32_t)0x00000020)
+#define SMARTCARD_ADVFEATURE_MSBFIRST_INIT ((uint32_t)0x00000080)
+#define IS_SMARTCARD_ADVFEATURE_INIT(INIT) ((INIT) <= (SMARTCARD_ADVFEATURE_NO_INIT | \
+ SMARTCARD_ADVFEATURE_TXINVERT_INIT | \
+ SMARTCARD_ADVFEATURE_RXINVERT_INIT | \
+ SMARTCARD_ADVFEATURE_DATAINVERT_INIT | \
+ SMARTCARD_ADVFEATURE_SWAP_INIT | \
+ SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT | \
+ SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT | \
+ SMARTCARD_ADVFEATURE_MSBFIRST_INIT))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Tx_Inv SMARTCARD advanced feature TX pin active level inversion
+ * @{
+ */
+#define SMARTCARD_ADVFEATURE_TXINV_DISABLE ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_TXINV_ENABLE ((uint32_t)USART_CR2_TXINV)
+#define IS_SMARTCARD_ADVFEATURE_TXINV(TXINV) (((TXINV) == SMARTCARD_ADVFEATURE_TXINV_DISABLE) || \
+ ((TXINV) == SMARTCARD_ADVFEATURE_TXINV_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Rx_Inv SMARTCARD advanced feature RX pin active level inversion
+ * @{
+ */
+#define SMARTCARD_ADVFEATURE_RXINV_DISABLE ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_RXINV_ENABLE ((uint32_t)USART_CR2_RXINV)
+#define IS_SMARTCARD_ADVFEATURE_RXINV(RXINV) (((RXINV) == SMARTCARD_ADVFEATURE_RXINV_DISABLE) || \
+ ((RXINV) == SMARTCARD_ADVFEATURE_RXINV_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Data_Inv SMARTCARD advanced feature Binary Data inversion
+ * @{
+ */
+#define SMARTCARD_ADVFEATURE_DATAINV_DISABLE ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_DATAINV_ENABLE ((uint32_t)USART_CR2_DATAINV)
+#define IS_SMARTCARD_ADVFEATURE_DATAINV(DATAINV) (((DATAINV) == SMARTCARD_ADVFEATURE_DATAINV_DISABLE) || \
+ ((DATAINV) == SMARTCARD_ADVFEATURE_DATAINV_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Rx_Tx_Swap SMARTCARD advanced feature RX TX pins swap
+ * @{
+ */
+#define SMARTCARD_ADVFEATURE_SWAP_DISABLE ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_SWAP_ENABLE ((uint32_t)USART_CR2_SWAP)
+#define IS_SMARTCARD_ADVFEATURE_SWAP(SWAP) (((SWAP) == SMARTCARD_ADVFEATURE_SWAP_DISABLE) || \
+ ((SWAP) == SMARTCARD_ADVFEATURE_SWAP_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Overrun_Disable SMARTCARD advanced feature Overrun Disable
+ * @{
+ */
+#define SMARTCARD_ADVFEATURE_OVERRUN_ENABLE ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_OVERRUN_DISABLE ((uint32_t)USART_CR3_OVRDIS)
+#define IS_SMARTCARD_OVERRUN(OVERRUN) (((OVERRUN) == SMARTCARD_ADVFEATURE_OVERRUN_ENABLE) || \
+ ((OVERRUN) == SMARTCARD_ADVFEATURE_OVERRUN_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_DMA_Disable_on_Rx_Error SMARTCARD advanced feature DMA Disable on Rx Error
+ * @{
+ */
+#define SMARTCARD_ADVFEATURE_DMA_ENABLEONRXERROR ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_DMA_DISABLEONRXERROR ((uint32_t)USART_CR3_DDRE)
+#define IS_SMARTCARD_ADVFEATURE_DMAONRXERROR(DMA) (((DMA) == SMARTCARD_ADVFEATURE_DMA_ENABLEONRXERROR) || \
+ ((DMA) == SMARTCARD_ADVFEATURE_DMA_DISABLEONRXERROR))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_MSB_First SMARTCARD advanced feature MSB first
+ * @{
+ */
+#define SMARTCARD_ADVFEATURE_MSBFIRST_DISABLE ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_MSBFIRST_ENABLE ((uint32_t)USART_CR2_MSBFIRST)
+#define IS_SMARTCARD_ADVFEATURE_MSBFIRST(MSBFIRST) (((MSBFIRST) == SMARTCARD_ADVFEATURE_MSBFIRST_DISABLE) || \
+ ((MSBFIRST) == SMARTCARD_ADVFEATURE_MSBFIRST_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Flags SMARTCARD Flags
+ * Elements values convention: 0xXXXX
+ * - 0xXXXX : Flag mask in the ISR register
+ * @{
+ */
+#define SMARTCARD_FLAG_REACK ((uint32_t)0x00400000)
+#define SMARTCARD_FLAG_TEACK ((uint32_t)0x00200000)
+#define SMARTCARD_FLAG_BUSY ((uint32_t)0x00010000)
+#define SMARTCARD_FLAG_EOBF ((uint32_t)0x00001000)
+#define SMARTCARD_FLAG_RTOF ((uint32_t)0x00000800)
+#define SMARTCARD_FLAG_TXE ((uint32_t)0x00000080)
+#define SMARTCARD_FLAG_TC ((uint32_t)0x00000040)
+#define SMARTCARD_FLAG_RXNE ((uint32_t)0x00000020)
+#define SMARTCARD_FLAG_ORE ((uint32_t)0x00000008)
+#define SMARTCARD_FLAG_NE ((uint32_t)0x00000004)
+#define SMARTCARD_FLAG_FE ((uint32_t)0x00000002)
+#define SMARTCARD_FLAG_PE ((uint32_t)0x00000001)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Interrupt_definition SMARTCARD Interrupts Definition
+ * Elements values convention: 0000ZZZZ0XXYYYYYb
+ * - YYYYY : Interrupt source position in the XX register (5bits)
+ * - XX : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR2 register
+ * - 11: CR3 register
+ * - ZZZZ : Flag position in the ISR register(4bits)
+ * @{
+ */
+
+#define SMARTCARD_IT_PE ((uint16_t)0x0028)
+#define SMARTCARD_IT_TXE ((uint16_t)0x0727)
+#define SMARTCARD_IT_TC ((uint16_t)0x0626)
+#define SMARTCARD_IT_RXNE ((uint16_t)0x0525)
+
+#define SMARTCARD_IT_ERR ((uint16_t)0x0060)
+#define SMARTCARD_IT_ORE ((uint16_t)0x0300)
+#define SMARTCARD_IT_NE ((uint16_t)0x0200)
+#define SMARTCARD_IT_FE ((uint16_t)0x0100)
+
+#define SMARTCARD_IT_EOB ((uint16_t)0x0C3B)
+#define SMARTCARD_IT_RTO ((uint16_t)0x0B3A)
+/**
+ * @}
+ */
+
+
+/** @defgroup SMARTCARD_IT_CLEAR_Flags SMARTCARD Interruption Clear Flags
+ * @{
+ */
+#define SMARTCARD_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */
+#define SMARTCARD_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */
+#define SMARTCARD_CLEAR_NEF USART_ICR_NCF /*!< Noise detected Clear Flag */
+#define SMARTCARD_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */
+#define SMARTCARD_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */
+#define SMARTCARD_CLEAR_RTOF USART_ICR_RTOCF /*!< Receiver Time Out Clear Flag */
+#define SMARTCARD_CLEAR_EOBF USART_ICR_EOBCF /*!< End Of Block Clear Flag */
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Request_Parameters SMARTCARD Request Parameters
+ * @{
+ */
+#define SMARTCARD_RXDATA_FLUSH_REQUEST ((uint16_t)USART_RQR_RXFRQ) /*!< Receive Data flush Request */
+#define SMARTCARD_TXDATA_FLUSH_REQUEST ((uint16_t)USART_RQR_TXFRQ) /*!< Transmit data flush Request */
+#define IS_SMARTCARD_REQUEST_PARAMETER(PARAM) (((PARAM) == SMARTCARD_RXDATA_FLUSH_REQUEST) || \
+ ((PARAM) == SMARTCARD_TXDATA_FLUSH_REQUEST))
+/**
+ * @}
+ */
+
+
+/** @defgroup SMARTCARD_CR3_SCARCNT_LSB_POS SMARTCARD auto retry counter LSB position in CR3 register
+ * @{
+ */
+#define SMARTCARD_CR3_SCARCNT_LSB_POS ((uint32_t) 17)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_GTPR_GT_LSB_POS SMARTCARD guard time value LSB position in GTPR register
+ * @{
+ */
+#define SMARTCARD_GTPR_GT_LSB_POS ((uint32_t) 8)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_RTOR_BLEN_LSB_POS SMARTCARD block length LSB position in RTOR register
+ * @{
+ */
+#define SMARTCARD_RTOR_BLEN_LSB_POS ((uint32_t) 24)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Interruption_Mask SMARTCARD interruptions flag mask
+ * @{
+ */
+#define SMARTCARD_IT_MASK ((uint16_t)0x001F)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup SMARTCARD_Exported_Macros SMARTCARD Exported Macros
+ * @{
+ */
+
+/** @brief Reset SMARTCARD handle state
+ * @param __HANDLE__: SMARTCARD handle.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SMARTCARD_STATE_RESET)
+
+/** @brief Checks whether the specified Smartcard flag is set or not.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_FLAG_REACK: Receive enable ackowledge flag
+ * @arg SMARTCARD_FLAG_TEACK: Transmit enable ackowledge flag
+ * @arg SMARTCARD_FLAG_BUSY: Busy flag
+ * @arg SMARTCARD_FLAG_EOBF: End of block flag
+ * @arg SMARTCARD_FLAG_RTOF: Receiver timeout flag
+ * @arg SMARTCARD_FLAG_TXE: Transmit data register empty flag
+ * @arg SMARTCARD_FLAG_TC: Transmission Complete flag
+ * @arg SMARTCARD_FLAG_RXNE: Receive data register not empty flag
+ * @arg SMARTCARD_FLAG_ORE: OverRun Error flag
+ * @arg SMARTCARD_FLAG_NE: Noise Error flag
+ * @arg SMARTCARD_FLAG_FE: Framing Error flag
+ * @arg SMARTCARD_FLAG_PE: Parity Error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_SMARTCARD_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))
+
+
+/** @brief Enables the specified SmartCard interrupt.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral.
+ * @param __INTERRUPT__: specifies the SMARTCARD interrupt to enable.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_IT_EOBF: End Of Block interrupt
+ * @arg SMARTCARD_IT_RTOF: Receive TimeOut interrupt
+ * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt
+ * @arg SMARTCARD_IT_TC: Transmission complete interrupt
+ * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
+ * @arg SMARTCARD_IT_PE: Parity Error interrupt
+ * @arg SMARTCARD_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_SMARTCARD_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 |= (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
+ ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 |= (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 |= (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))))
+
+/** @brief Disables the specified SmartCard interrupt.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral.
+ * @param __INTERRUPT__: specifies the SMARTCARD interrupt to disable.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_IT_EOBF: End Of Block interrupt
+ * @arg SMARTCARD_IT_RTOF: Receive TimeOut interrupt
+ * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt
+ * @arg SMARTCARD_IT_TC: Transmission complete interrupt
+ * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
+ * @arg SMARTCARD_IT_PE: Parity Error interrupt
+ * @arg SMARTCARD_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_SMARTCARD_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
+ ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))))
+
+
+/** @brief Checks whether the specified SmartCard interrupt has occurred or not.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral.
+ * @param __IT__: specifies the SMARTCARD interrupt to check.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_IT_EOBF: End Of Block interrupt
+ * @arg SMARTCARD_IT_RTOF: Receive TimeOut interrupt
+ * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt
+ * @arg SMARTCARD_IT_TC: Transmission complete interrupt
+ * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
+ * @arg SMARTCARD_IT_ORE: OverRun Error interrupt
+ * @arg SMARTCARD_IT_NE: Noise Error interrupt
+ * @arg SMARTCARD_IT_FE: Framing Error interrupt
+ * @arg SMARTCARD_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_SMARTCARD_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & ((uint32_t)1 << ((__IT__)>> 0x08)))
+
+/** @brief Checks whether the specified SmartCard interrupt interrupt source is enabled.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral.
+ * @param __IT__: specifies the SMARTCARD interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_IT_EOBF: End Of Block interrupt
+ * @arg SMARTCARD_IT_RTOF: Receive TimeOut interrupt
+ * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt
+ * @arg SMARTCARD_IT_TC: Transmission complete interrupt
+ * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
+ * @arg SMARTCARD_IT_ORE: OverRun Error interrupt
+ * @arg SMARTCARD_IT_NE: Noise Error interrupt
+ * @arg SMARTCARD_IT_FE: Framing Error interrupt
+ * @arg SMARTCARD_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_SMARTCARD_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((uint8_t)(__IT__)) >> 5U) == 1)? (__HANDLE__)->Instance->CR1 : \
+ (((((uint8_t)(__IT__)) >> 5U) == 2)? (__HANDLE__)->Instance->CR2 : \
+ (__HANDLE__)->Instance->CR3)) & ((uint32_t)1 << (((uint16_t)(__IT__)) & SMARTCARD_IT_MASK)))
+
+
+/** @brief Clears the specified SMARTCARD ISR flag, in setting the proper ICR register flag.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral.
+ * @param __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set
+ * to clear the corresponding interrupt
+ * This parameter can be one of the following values:
+ * @arg USART_CLEAR_PEF: Parity Error Clear Flag
+ * @arg USART_CLEAR_FEF: Framing Error Clear Flag
+ * @arg USART_CLEAR_NEF: Noise detected Clear Flag
+ * @arg USART_CLEAR_OREF: OverRun Error Clear Flag
+ * @arg USART_CLEAR_TCF: Transmission Complete Clear Flag
+ * @arg USART_CLEAR_RTOF: Receiver Time Out Clear Flag
+ * @arg USART_CLEAR_EOBF: End Of Block Clear Flag
+ * @retval None
+ */
+#define __HAL_SMARTCARD_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__))
+
+/** @brief Set a specific SMARTCARD request flag.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral.
+ * @param __REQ__: specifies the request flag to set
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_RXDATA_FLUSH_REQUEST: Receive Data flush Request
+ * @arg SMARTCARD_TXDATA_FLUSH_REQUEST: Transmit data flush Request
+ *
+ * @retval None
+ */
+#define __HAL_SMARTCARD_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__))
+
+/** @brief Enable the USART associated to the SMARTCARD Handle
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3 to select the USART peripheral
+ * @retval None
+ */
+#define __HAL_SMARTCARD_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
+
+/** @brief Disable the USART associated to the SMARTCARD Handle
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3 to select the USART peripheral
+ * @retval None
+ */
+#define __HAL_SMARTCARD_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
+
+/** @brief Check the Baud rate range. The maximum Baud Rate is derived from the
+ * maximum clock on F0 (i.e. 48 MHz) divided by the oversampling used
+ * on the SMARTCARD (i.e. 16)
+ * @param __BAUDRATE__: Baud rate set by the configuration function.
+ * @retval Test result (TRUE or FALSE)
+ */
+#define IS_SMARTCARD_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 4500001)
+
+/** @brief Check the block length range. The maximum SMARTCARD block length is 0xFF.
+ * @param __LENGTH__: block length.
+ * @retval Test result (TRUE or FALSE)
+ */
+#define IS_SMARTCARD_BLOCKLENGTH(__LENGTH__) ((__LENGTH__) <= 0xFF)
+
+/** @brief Check the receiver timeout value. The maximum SMARTCARD receiver timeout
+ * value is 0xFFFFFF.
+ * @param __TIMEOUTVALUE__: receiver timeout value.
+ * @retval Test result (TRUE or FALSE)
+ */
+#define IS_SMARTCARD_TIMEOUT_VALUE(__TIMEOUTVALUE__) ((__TIMEOUTVALUE__) <= 0xFFFFFF)
+
+/** @brief Check the SMARTCARD autoretry counter value. The maximum number of
+ * retransmissions is 0x7.
+ * @param __COUNT__: number of retransmissions
+ * @retval Test result (TRUE or FALSE)
+ */
+#define IS_SMARTCARD_AUTORETRY_COUNT(__COUNT__) ((__COUNT__) <= 0x7)
+
+/**
+ * @}
+ */
+
+/* Include SMARTCARD HAL Extended module */
+#include "stm32f0xx_hal_smartcard_ex.h"
+
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup SMARTCARD_Exported_Functions SMARTCARD Exported Functions
+ * @{
+ */
+
+/** @addtogroup SMARTCARD_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsmartcard);
+HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsmartcard);
+void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsmartcard);
+void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsmartcard);
+/**
+ * @}
+ */
+
+/** @addtogroup SMARTCARD_Exported_Functions_Group2 IO operation functions
+ * @{
+ */
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size);
+void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsmartcard);
+void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard);
+void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard);
+void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsmartcard);
+/**
+ * @}
+ */
+
+/** @addtogroup SMARTCARD_Exported_Functions_Group3 Peripheral State and Errors functions
+ * @{
+ */
+/* Peripheral State and Error functions ***************************************/
+HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsmartcard);
+uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsmartcard);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_SMARTCARD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/include/stm32f0xx_hal_smartcard_ex.h b/f0/include/stm32f0xx_hal_smartcard_ex.h
new file mode 100755
index 0000000000000000000000000000000000000000..7a13e1a389647db17a1b19fe2d653122fd6dd021
--- /dev/null
+++ b/f0/include/stm32f0xx_hal_smartcard_ex.h
@@ -0,0 +1,330 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_smartcard_ex.h
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief Header file of SMARTCARD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_SMARTCARD_EX_H
+#define __STM32F0xx_HAL_SMARTCARD_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SMARTCARDEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup SMARTCARD_Extended_Exported_Macros SMARTCARDEx Exported Macros
+ * @{
+ */
+
+/** @brief Reports the SMARTCARD clock source.
+ * @param __HANDLE__: specifies the SMARTCARD Handle
+ * @param __CLOCKSOURCE__ : output variable
+ * @retval the SMARTCARD clocking source, written in __CLOCKSOURCE__.
+ */
+#if defined(STM32F031x6) || defined(STM32F038xx)
+#define __HAL_SMARTCARD_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } while(0)
+#elif defined (STM32F030x8) || \
+ defined (STM32F042x6) || defined (STM32F048xx) || \
+ defined (STM32F051x8) || defined (STM32F058xx)
+#define __HAL_SMARTCARD_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+#elif defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)
+#define __HAL_SMARTCARD_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+#elif defined(STM32F091xC) || defined(STM32F098xx)
+#define __HAL_SMARTCARD_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ switch(__HAL_RCC_GET_USART3_SOURCE()) \
+ { \
+ case RCC_USART3CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART3CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART3CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART3CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART5) \
+ { \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART6) \
+ { \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART7) \
+ { \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART8) \
+ { \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+#endif /* defined(STM32F031x6) || defined(STM32F038xx) */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization and de-initialization functions ****************************/
+/* IO operation functions *****************************************************/
+
+/** @addtogroup SMARTCARDEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup SMARTCARDEx_Exported_Functions_Group1
+ * @{
+ */
+
+/* Peripheral Control functions ***********************************************/
+void HAL_SMARTCARDEx_BlockLength_Config(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t BlockLength);
+void HAL_SMARTCARDEx_TimeOut_Config(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t TimeOutValue);
+HAL_StatusTypeDef HAL_SMARTCARDEx_EnableReceiverTimeOut(SMARTCARD_HandleTypeDef *hsmartcard);
+HAL_StatusTypeDef HAL_SMARTCARDEx_DisableReceiverTimeOut(SMARTCARD_HandleTypeDef *hsmartcard);
+
+/* Peripheral State and Error functions ***************************************/
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_SMARTCARD_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/include/stm32f0xx_hal_smbus.h b/f0/include/stm32f0xx_hal_smbus.h
new file mode 100755
index 0000000000000000000000000000000000000000..eb3ecad077e8ef656c4b398b893b9319975044e5
--- /dev/null
+++ b/f0/include/stm32f0xx_hal_smbus.h
@@ -0,0 +1,617 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_smbus.h
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief Header file of SMBUS HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_SMBUS_H
+#define __STM32F0xx_HAL_SMBUS_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SMBUS
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup SMBUS_Exported_Types SMBUS Exported Types
+ * @{
+ */
+
+/**
+ * @brief SMBUS Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Timing; /*!< Specifies the SMBUS_TIMINGR_register value.
+ This parameter calculated by referring to SMBUS initialization
+ section in Reference manual */
+ uint32_t AnalogFilter; /*!< Specifies if Analog Filter is enable or not.
+ This parameter can be a a value of @ref SMBUS_Analog_Filter */
+
+ uint32_t OwnAddress1; /*!< Specifies the first device own address.
+ This parameter can be a 7-bit or 10-bit address. */
+
+ uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode for master is selected.
+ This parameter can be a value of @ref SMBUS_addressing_mode */
+
+ uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected.
+ This parameter can be a value of @ref SMBUS_dual_addressing_mode */
+
+ uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected
+ This parameter can be a 7-bit address. */
+
+ uint32_t OwnAddress2Masks; /*!< Specifies the acknoledge mask address second device own address if dual addressing mode is selected
+ This parameter can be a value of @ref SMBUS_own_address2_masks. */
+
+ uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected.
+ This parameter can be a value of @ref SMBUS_general_call_addressing_mode. */
+
+ uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected.
+ This parameter can be a value of @ref SMBUS_nostretch_mode */
+
+ uint32_t PacketErrorCheckMode; /*!< Specifies if Packet Error Check mode is selected.
+ This parameter can be a value of @ref SMBUS_packet_error_check_mode */
+
+ uint32_t PeripheralMode; /*!< Specifies which mode of Periphal is selected.
+ This parameter can be a value of @ref SMBUS_peripheral_mode */
+
+ uint32_t SMBusTimeout; /*!< Specifies the content of the 32 Bits SMBUS_TIMEOUT_register value.
+ (Enable bits and different timeout values)
+ This parameter calculated by referring to SMBUS initialization
+ section in Reference manual */
+} SMBUS_InitTypeDef;
+
+/**
+ * @brief SMBUS handle Structure definition
+ */
+typedef struct
+{
+ I2C_TypeDef *Instance; /*!< SMBUS registers base address */
+
+ SMBUS_InitTypeDef Init; /*!< SMBUS communication parameters */
+
+ uint8_t *pBuffPtr; /*!< Pointer to SMBUS transfer buffer */
+
+ uint16_t XferSize; /*!< SMBUS transfer size */
+
+ __IO uint16_t XferCount; /*!< SMBUS transfer counter */
+
+ __IO uint32_t XferOptions; /*!< SMBUS transfer options */
+
+ __IO uint32_t PreviousState; /*!< SMBUS communication Previous state
+ This parameter can be a value of @ref SMBUS_State */
+
+ HAL_LockTypeDef Lock; /*!< SMBUS locking object */
+
+ __IO uint32_t State; /*!< SMBUS communication state
+ This parameter can be a value of @ref SMBUS_State */
+
+ __IO uint32_t ErrorCode; /*!< SMBUS Error code
+ This parameter can be a value of @ref SMBUS_Error */
+
+}SMBUS_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup SMBUS_Exported_Constants SMBUS Exported Constants
+ * @{
+ */
+
+/** @defgroup SMBUS_Error SMBUS Error
+ * @{
+ */
+#define HAL_SMBUS_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_SMBUS_ERROR_BERR ((uint32_t)0x00000001) /*!< BERR error */
+#define HAL_SMBUS_ERROR_ARLO ((uint32_t)0x00000002) /*!< ARLO error */
+#define HAL_SMBUS_ERROR_ACKF ((uint32_t)0x00000004) /*!< ACKF error */
+#define HAL_SMBUS_ERROR_OVR ((uint32_t)0x00000008) /*!< OVR error */
+#define HAL_SMBUS_ERROR_HALTIMEOUT ((uint32_t)0x00000010) /*!< Timeout error */
+#define HAL_SMBUS_ERROR_BUSTIMEOUT ((uint32_t)0x00000020) /*!< Bus Timeout error */
+#define HAL_SMBUS_ERROR_ALERT ((uint32_t)0x00000040) /*!< Alert error */
+#define HAL_SMBUS_ERROR_PECERR ((uint32_t)0x00000080) /*!< PEC error */
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_State SMBUS State
+ * @{
+ */
+
+#define HAL_SMBUS_STATE_RESET ((uint32_t)0x00000000) /*!< SMBUS not yet initialized or disabled */
+#define HAL_SMBUS_STATE_READY ((uint32_t)0x00000001) /*!< SMBUS initialized and ready for use */
+#define HAL_SMBUS_STATE_BUSY ((uint32_t)0x00000002) /*!< SMBUS internal process is ongoing */
+#define HAL_SMBUS_STATE_MASTER_BUSY_TX ((uint32_t)0x00000012) /*!< Master Data Transmission process is ongoing */
+#define HAL_SMBUS_STATE_MASTER_BUSY_RX ((uint32_t)0x00000022) /*!< Master Data Reception process is ongoing */
+#define HAL_SMBUS_STATE_SLAVE_BUSY_TX ((uint32_t)0x00000032) /*!< Slave Data Transmission process is ongoing */
+#define HAL_SMBUS_STATE_SLAVE_BUSY_RX ((uint32_t)0x00000042) /*!< Slave Data Reception process is ongoing */
+#define HAL_SMBUS_STATE_TIMEOUT ((uint32_t)0x00000003) /*!< Timeout state */
+#define HAL_SMBUS_STATE_ERROR ((uint32_t)0x00000004) /*!< Reception process is ongoing */
+#define HAL_SMBUS_STATE_SLAVE_LISTEN ((uint32_t)0x00000008) /*!< Address Listen Mode is ongoing */
+ /* Aliases for inter STM32 series compatibility */
+#define HAL_SMBUS_STATE_LISTEN HAL_SMBUS_STATE_SLAVE_LISTEN
+
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_Analog_Filter SMBUS Analog Filter
+ * @{
+ */
+#define SMBUS_ANALOGFILTER_ENABLED ((uint32_t)0x00000000)
+#define SMBUS_ANALOGFILTER_DISABLED I2C_CR1_ANFOFF
+
+#define IS_SMBUS_ANALOG_FILTER(FILTER) (((FILTER) == SMBUS_ANALOGFILTER_ENABLED) || \
+ ((FILTER) == SMBUS_ANALOGFILTER_DISABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_addressing_mode SMBUS addressing mode
+ * @{
+ */
+#define SMBUS_ADDRESSINGMODE_7BIT ((uint32_t)0x00000001)
+#define SMBUS_ADDRESSINGMODE_10BIT ((uint32_t)0x00000002)
+
+#define IS_SMBUS_ADDRESSING_MODE(MODE) (((MODE) == SMBUS_ADDRESSINGMODE_7BIT) || \
+ ((MODE) == SMBUS_ADDRESSINGMODE_10BIT))
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_dual_addressing_mode SMBUS dual addressing mode
+ * @{
+ */
+
+#define SMBUS_DUALADDRESS_DISABLED ((uint32_t)0x00000000)
+#define SMBUS_DUALADDRESS_ENABLED I2C_OAR2_OA2EN
+
+#define IS_SMBUS_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == SMBUS_DUALADDRESS_DISABLED) || \
+ ((ADDRESS) == SMBUS_DUALADDRESS_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_own_address2_masks SMBUS ownaddress2 masks
+ * @{
+ */
+
+#define SMBUS_OA2_NOMASK ((uint8_t)0x00)
+#define SMBUS_OA2_MASK01 ((uint8_t)0x01)
+#define SMBUS_OA2_MASK02 ((uint8_t)0x02)
+#define SMBUS_OA2_MASK03 ((uint8_t)0x03)
+#define SMBUS_OA2_MASK04 ((uint8_t)0x04)
+#define SMBUS_OA2_MASK05 ((uint8_t)0x05)
+#define SMBUS_OA2_MASK06 ((uint8_t)0x06)
+#define SMBUS_OA2_MASK07 ((uint8_t)0x07)
+
+#define IS_SMBUS_OWN_ADDRESS2_MASK(MASK) (((MASK) == SMBUS_OA2_NOMASK) || \
+ ((MASK) == SMBUS_OA2_MASK01) || \
+ ((MASK) == SMBUS_OA2_MASK02) || \
+ ((MASK) == SMBUS_OA2_MASK03) || \
+ ((MASK) == SMBUS_OA2_MASK04) || \
+ ((MASK) == SMBUS_OA2_MASK05) || \
+ ((MASK) == SMBUS_OA2_MASK06) || \
+ ((MASK) == SMBUS_OA2_MASK07))
+/**
+ * @}
+ */
+
+
+/** @defgroup SMBUS_general_call_addressing_mode SMBUS general call addressing mode
+ * @{
+ */
+#define SMBUS_GENERALCALL_DISABLED ((uint32_t)0x00000000)
+#define SMBUS_GENERALCALL_ENABLED I2C_CR1_GCEN
+
+#define IS_SMBUS_GENERAL_CALL(CALL) (((CALL) == SMBUS_GENERALCALL_DISABLED) || \
+ ((CALL) == SMBUS_GENERALCALL_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_nostretch_mode SMBUS nostretch mode
+ * @{
+ */
+#define SMBUS_NOSTRETCH_DISABLED ((uint32_t)0x00000000)
+#define SMBUS_NOSTRETCH_ENABLED I2C_CR1_NOSTRETCH
+
+#define IS_SMBUS_NO_STRETCH(STRETCH) (((STRETCH) == SMBUS_NOSTRETCH_DISABLED) || \
+ ((STRETCH) == SMBUS_NOSTRETCH_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_packet_error_check_mode SMBUS packet error check mode
+ * @{
+ */
+#define SMBUS_PEC_DISABLED ((uint32_t)0x00000000)
+#define SMBUS_PEC_ENABLED I2C_CR1_PECEN
+
+#define IS_SMBUS_PEC(PEC) (((PEC) == SMBUS_PEC_DISABLED) || \
+ ((PEC) == SMBUS_PEC_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_peripheral_mode SMBUS peripheral mode
+ * @{
+ */
+#define SMBUS_PERIPHERAL_MODE_SMBUS_HOST (uint32_t)(I2C_CR1_SMBHEN)
+#define SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE (uint32_t)(0x00000000)
+#define SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE_ARP (uint32_t)(I2C_CR1_SMBDEN)
+
+#define IS_SMBUS_PERIPHERAL_MODE(MODE) (((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_HOST) || \
+ ((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE) || \
+ ((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE_ARP))
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_ReloadEndMode_definition SMBUS ReloadEndMode definition
+ * @{
+ */
+
+#define SMBUS_SOFTEND_MODE ((uint32_t)0x00000000)
+#define SMBUS_RELOAD_MODE I2C_CR2_RELOAD
+#define SMBUS_AUTOEND_MODE I2C_CR2_AUTOEND
+#define SMBUS_SENDPEC_MODE I2C_CR2_PECBYTE
+
+#define IS_SMBUS_TRANSFER_MODE(MODE) (((MODE) == SMBUS_RELOAD_MODE) || \
+ ((MODE) == SMBUS_AUTOEND_MODE) || \
+ ((MODE) == SMBUS_SOFTEND_MODE) || \
+ ((MODE) == (SMBUS_RELOAD_MODE | SMBUS_SENDPEC_MODE)) || \
+ ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE)) || \
+ ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_RELOAD_MODE)) || \
+ ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE | SMBUS_RELOAD_MODE )))
+
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_StartStopMode_definition SMBUS StartStopMode definition
+ * @{
+ */
+
+#define SMBUS_NO_STARTSTOP ((uint32_t)0x00000000)
+#define SMBUS_GENERATE_STOP I2C_CR2_STOP
+#define SMBUS_GENERATE_START_READ (uint32_t)(I2C_CR2_START | I2C_CR2_RD_WRN)
+#define SMBUS_GENERATE_START_WRITE I2C_CR2_START
+
+#define IS_SMBUS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == SMBUS_GENERATE_STOP) || \
+ ((REQUEST) == SMBUS_GENERATE_START_READ) || \
+ ((REQUEST) == SMBUS_GENERATE_START_WRITE) || \
+ ((REQUEST) == SMBUS_NO_STARTSTOP))
+
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_XferOptions_definition SMBUS XferOptions definition
+ * @{
+ */
+
+#define SMBUS_FIRST_FRAME ((uint32_t)(SMBUS_SOFTEND_MODE))
+#define SMBUS_NEXT_FRAME ((uint32_t)(SMBUS_RELOAD_MODE | SMBUS_SOFTEND_MODE))
+#define SMBUS_FIRST_AND_LAST_FRAME_NO_PEC SMBUS_AUTOEND_MODE
+#define SMBUS_LAST_FRAME_NO_PEC SMBUS_AUTOEND_MODE
+#define SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC ((uint32_t)(SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE))
+#define SMBUS_LAST_FRAME_WITH_PEC ((uint32_t)(SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE))
+
+#define IS_SMBUS_TRANSFER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == SMBUS_FIRST_FRAME) || \
+ ((REQUEST) == SMBUS_NEXT_FRAME) || \
+ ((REQUEST) == SMBUS_FIRST_AND_LAST_FRAME_NO_PEC) || \
+ ((REQUEST) == SMBUS_LAST_FRAME_NO_PEC) || \
+ ((REQUEST) == SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC) || \
+ ((REQUEST) == SMBUS_LAST_FRAME_WITH_PEC))
+
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_Interrupt_configuration_definition SMBUS Interrupt configuration definition
+ * @brief SMBUS Interrupt definition
+ * Elements values convention: 0xXXXXXXXX
+ * - XXXXXXXX : Interrupt control mask
+ * @{
+ */
+#define SMBUS_IT_ERRI I2C_CR1_ERRIE
+#define SMBUS_IT_TCI I2C_CR1_TCIE
+#define SMBUS_IT_STOPI I2C_CR1_STOPIE
+#define SMBUS_IT_NACKI I2C_CR1_NACKIE
+#define SMBUS_IT_ADDRI I2C_CR1_ADDRIE
+#define SMBUS_IT_RXI I2C_CR1_RXIE
+#define SMBUS_IT_TXI I2C_CR1_TXIE
+#define SMBUS_IT_TX (SMBUS_IT_ERRI | SMBUS_IT_TCI | SMBUS_IT_STOPI | SMBUS_IT_NACKI | SMBUS_IT_TXI)
+#define SMBUS_IT_RX (SMBUS_IT_ERRI | SMBUS_IT_TCI | SMBUS_IT_NACKI | SMBUS_IT_RXI)
+#define SMBUS_IT_ALERT (SMBUS_IT_ERRI)
+#define SMBUS_IT_ADDR (SMBUS_IT_ADDRI | SMBUS_IT_STOPI | SMBUS_IT_NACKI)
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_Flag_definition SMBUS Flag definition
+ * @brief Flag definition
+ * Elements values convention: 0xXXXXYYYY
+ * - XXXXXXXX : Flag mask
+ * @{
+ */
+
+#define SMBUS_FLAG_TXE I2C_ISR_TXE
+#define SMBUS_FLAG_TXIS I2C_ISR_TXIS
+#define SMBUS_FLAG_RXNE I2C_ISR_RXNE
+#define SMBUS_FLAG_ADDR I2C_ISR_ADDR
+#define SMBUS_FLAG_AF I2C_ISR_NACKF
+#define SMBUS_FLAG_STOPF I2C_ISR_STOPF
+#define SMBUS_FLAG_TC I2C_ISR_TC
+#define SMBUS_FLAG_TCR I2C_ISR_TCR
+#define SMBUS_FLAG_BERR I2C_ISR_BERR
+#define SMBUS_FLAG_ARLO I2C_ISR_ARLO
+#define SMBUS_FLAG_OVR I2C_ISR_OVR
+#define SMBUS_FLAG_PECERR I2C_ISR_PECERR
+#define SMBUS_FLAG_TIMEOUT I2C_ISR_TIMEOUT
+#define SMBUS_FLAG_ALERT I2C_ISR_ALERT
+#define SMBUS_FLAG_BUSY I2C_ISR_BUSY
+#define SMBUS_FLAG_DIR I2C_ISR_DIR
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros ------------------------------------------------------------*/
+/** @defgroup SMBUS_Exported_Macros SMBUS Exported Macros
+ * @{
+ */
+
+/** @brief Reset SMBUS handle state
+ * @param __HANDLE__: SMBUS handle.
+ * @retval None
+ */
+#define __HAL_SMBUS_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SMBUS_STATE_RESET)
+
+/** @brief Enable or disable the specified SMBUS interrupts.
+ * @param __HANDLE__: specifies the SMBUS Handle.
+ * This parameter can be SMBUS where x: 1 or 2 to select the SMBUS peripheral.
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg SMBUS_IT_ERRI: Errors interrupt enable
+ * @arg SMBUS_IT_TCI: Transfer complete interrupt enable
+ * @arg SMBUS_IT_STOPI: STOP detection interrupt enable
+ * @arg SMBUS_IT_NACKI: NACK received interrupt enable
+ * @arg SMBUS_IT_ADDRI: Address match interrupt enable
+ * @arg SMBUS_IT_RXI: RX interrupt enable
+ * @arg SMBUS_IT_TXI: TX interrupt enable
+ *
+ * @retval None
+ */
+
+#define __HAL_SMBUS_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__))
+#define __HAL_SMBUS_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__)))
+
+/** @brief Checks if the specified SMBUS interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the SMBUS Handle.
+ * This parameter can be SMBUS where x: 1 or 2 to select the SMBUS peripheral.
+ * @param __INTERRUPT__: specifies the SMBUS interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SMBUS_IT_ERRI: Errors interrupt enable
+ * @arg SMBUS_IT_TCI: Transfer complete interrupt enable
+ * @arg SMBUS_IT_STOPI: STOP detection interrupt enable
+ * @arg SMBUS_IT_NACKI: NACK received interrupt enable
+ * @arg SMBUS_IT_ADDRI: Address match interrupt enable
+ * @arg SMBUS_IT_RXI: RX interrupt enable
+ * @arg SMBUS_IT_TXI: TX interrupt enable
+ *
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_SMBUS_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Checks whether the specified SMBUS flag is set or not.
+ * @param __HANDLE__: specifies the SMBUS Handle.
+ * This parameter can be SMBUS where x: 1 or 2 to select the SMBUS peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SMBUS_FLAG_TXE: Transmit data register empty
+ * @arg SMBUS_FLAG_TXIS: Transmit interrupt status
+ * @arg SMBUS_FLAG_RXNE: Receive data register not empty
+ * @arg SMBUS_FLAG_ADDR: Address matched (slave mode)
+ * @arg SMBUS_FLAG_AF: NACK received flag
+ * @arg SMBUS_FLAG_STOPF: STOP detection flag
+ * @arg SMBUS_FLAG_TC: Transfer complete (master mode)
+ * @arg SMBUS_FLAG_TCR: Transfer complete reload
+ * @arg SMBUS_FLAG_BERR: Bus error
+ * @arg SMBUS_FLAG_ARLO: Arbitration lost
+ * @arg SMBUS_FLAG_OVR: Overrun/Underrun
+ * @arg SMBUS_FLAG_PECERR: PEC error in reception
+ * @arg SMBUS_FLAG_TIMEOUT: Timeout or Tlow detection flag
+ * @arg SMBUS_FLAG_ALERT: SMBus alert
+ * @arg SMBUS_FLAG_BUSY: Bus busy
+ * @arg SMBUS_FLAG_DIR: Transfer direction (slave mode)
+ *
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define SMBUS_FLAG_MASK ((uint32_t)0x0001FFFF)
+#define __HAL_SMBUS_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & ((__FLAG__) & SMBUS_FLAG_MASK)) == ((__FLAG__) & SMBUS_FLAG_MASK)))
+
+/** @brief Clears the SMBUS pending flags which are cleared by writing 1 in a specific bit.
+ * @param __HANDLE__: specifies the SMBUS Handle.
+ * This parameter can be SMBUS where x: 1 or 2 to select the SMBUS peripheral.
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg SMBUS_FLAG_ADDR: Address matched (slave mode)
+ * @arg SMBUS_FLAG_AF: NACK received flag
+ * @arg SMBUS_FLAG_STOPF: STOP detection flag
+ * @arg SMBUS_FLAG_BERR: Bus error
+ * @arg SMBUS_FLAG_ARLO: Arbitration lost
+ * @arg SMBUS_FLAG_OVR: Overrun/Underrun
+ * @arg SMBUS_FLAG_PECERR: PEC error in reception
+ * @arg SMBUS_FLAG_TIMEOUT: Timeout or Tlow detection flag
+ * @arg SMBUS_FLAG_ALERT: SMBus alert
+ *
+ * @retval None
+ */
+#define __HAL_SMBUS_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
+
+
+#define __HAL_SMBUS_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= I2C_CR1_PE)
+#define __HAL_SMBUS_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~I2C_CR1_PE)
+
+#define __HAL_SMBUS_RESET_CR1(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= (uint32_t)~((uint32_t)(I2C_CR1_SMBHEN | I2C_CR1_SMBDEN | I2C_CR1_PECEN)))
+#define __HAL_SMBUS_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_RD_WRN)))
+
+#define __HAL_SMBUS_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == SMBUS_ADDRESSINGMODE_7BIT) ? (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & (~I2C_CR2_RD_WRN)) : \
+ (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_ADD10) | (I2C_CR2_START)) & (~I2C_CR2_RD_WRN)))
+
+#define __HAL_SMBUS_GET_ADDR_MATCH(__HANDLE__) (((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) >> 17)
+#define __HAL_SMBUS_GET_DIR(__HANDLE__) (((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) >> 16)
+#define __HAL_SMBUS_GET_STOP_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_AUTOEND)
+#define __HAL_SMBUS_GET_PEC_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_PECBYTE)
+#define __HAL_SMBUS_GET_ALERT_ENABLED(__HANDLE__) ((__HANDLE__)->Instance->CR1 & I2C_CR1_ALERTEN)
+#define __HAL_SMBUS_GENERATE_NACK(__HANDLE__) ((__HANDLE__)->Instance->CR2 |= I2C_CR2_NACK)
+
+#define IS_SMBUS_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= (uint32_t)0x000003FF)
+#define IS_SMBUS_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FF)
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SMBUS_Exported_Functions SMBUS Exported Functions
+ * @{
+ */
+
+/** @addtogroup SMBUS_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_SMBUS_Init(SMBUS_HandleTypeDef *hsmbus);
+HAL_StatusTypeDef HAL_SMBUS_DeInit (SMBUS_HandleTypeDef *hsmbus);
+void HAL_SMBUS_MspInit(SMBUS_HandleTypeDef *hsmbus);
+void HAL_SMBUS_MspDeInit(SMBUS_HandleTypeDef *hsmbus);
+
+/**
+ * @}
+ */
+
+/** @addtogroup SMBUS_Exported_Functions_Group2 Input and Output operation functions
+ * @{
+ */
+
+/* IO operation functions *****************************************************/
+/******* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_SMBUS_IsDeviceReady(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout);
+
+/******* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_SMBUS_Master_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_SMBUS_Master_Receive_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_SMBUS_Master_Abort_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress);
+HAL_StatusTypeDef HAL_SMBUS_Slave_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_SMBUS_Slave_Receive_IT(SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+
+HAL_StatusTypeDef HAL_SMBUS_EnableAlert_IT(SMBUS_HandleTypeDef *hsmbus);
+HAL_StatusTypeDef HAL_SMBUS_DisableAlert_IT(SMBUS_HandleTypeDef *hsmbus);
+HAL_StatusTypeDef HAL_SMBUS_Slave_Listen_IT(SMBUS_HandleTypeDef *hsmbus);
+HAL_StatusTypeDef HAL_SMBUS_DisableListen_IT(SMBUS_HandleTypeDef *hsmbus);
+
+/* Aliases for new API and to insure inter STM32 series compatibility */
+#define HAL_SMBUS_EnableListen_IT HAL_SMBUS_Slave_Listen_IT
+
+/******* SMBUS IRQHandler and Callbacks used in non blocking modes (Interrupt) */
+void HAL_SMBUS_EV_IRQHandler(SMBUS_HandleTypeDef *hsmbus);
+void HAL_SMBUS_ER_IRQHandler(SMBUS_HandleTypeDef *hsmbus);
+void HAL_SMBUS_MasterTxCpltCallback(SMBUS_HandleTypeDef *hsmbus);
+void HAL_SMBUS_MasterRxCpltCallback(SMBUS_HandleTypeDef *hsmbus);
+void HAL_SMBUS_SlaveTxCpltCallback(SMBUS_HandleTypeDef *hsmbus);
+void HAL_SMBUS_SlaveRxCpltCallback(SMBUS_HandleTypeDef *hsmbus);
+void HAL_SMBUS_SlaveAddrCallback(SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection, uint16_t AddrMatchCode);
+void HAL_SMBUS_SlaveListenCpltCallback(SMBUS_HandleTypeDef *hsmbus);
+
+/* Aliases for new API and to insure inter STM32 series compatibility */
+#define HAL_SMBUS_AddrCallback HAL_SMBUS_SlaveAddrCallback
+#define HAL_SMBUS_ListenCpltCallback HAL_SMBUS_SlaveListenCpltCallback
+
+void HAL_SMBUS_ErrorCallback(SMBUS_HandleTypeDef *hsmbus);
+
+/**
+ * @}
+ */
+
+/** @addtogroup SMBUS_Exported_Functions_Group3 Peripheral State and Errors functions
+ * @{
+ */
+
+/* Peripheral State and Errors functions **************************************************/
+uint32_t HAL_SMBUS_GetState(SMBUS_HandleTypeDef *hsmbus);
+uint32_t HAL_SMBUS_GetError(SMBUS_HandleTypeDef *hsmbus);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F0xx_HAL_SMBUS_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/include/stm32f0xx_hal_spi.h b/f0/include/stm32f0xx_hal_spi.h
new file mode 100755
index 0000000000000000000000000000000000000000..2c5397d41fea2f413ad45785e7da2d4ad846a271
--- /dev/null
+++ b/f0/include/stm32f0xx_hal_spi.h
@@ -0,0 +1,677 @@
+ /**
+ ******************************************************************************
+ * @file stm32f0xx_hal_spi.h
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief Header file of SPI HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_SPI_H
+#define __STM32F0xx_HAL_SPI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SPI
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup SPI_Exported_Types SPI Exported Types
+ * @{
+ */
+
+/**
+ * @brief SPI Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Mode; /*!< Specifies the SPI operating mode.
+ This parameter can be a value of @ref SPI_mode */
+
+ uint32_t Direction; /*!< Specifies the SPI bidirectional mode state.
+ This parameter can be a value of @ref SPI_Direction */
+
+ uint32_t DataSize; /*!< Specifies the SPI data size.
+ This parameter can be a value of @ref SPI_data_size */
+
+ uint32_t CLKPolarity; /*!< Specifies the serial clock steady state.
+ This parameter can be a value of @ref SPI_Clock_Polarity */
+
+ uint32_t CLKPhase; /*!< Specifies the clock active edge for the bit capture.
+ This parameter can be a value of @ref SPI_Clock_Phase */
+
+ uint32_t NSS; /*!< Specifies whether the NSS signal is managed by
+ hardware (NSS pin) or by software using the SSI bit.
+ This parameter can be a value of @ref SPI_Slave_Select_management */
+
+ uint32_t BaudRatePrescaler; /*!< Specifies the Baud Rate prescaler value which will be
+ used to configure the transmit and receive SCK clock.
+ This parameter can be a value of @ref SPI_BaudRate_Prescaler
+ @note The communication clock is derived from the master
+ clock. The slave clock does not need to be set. */
+
+ uint32_t FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit.
+ This parameter can be a value of @ref SPI_MSB_LSB_transmission */
+
+ uint32_t TIMode; /*!< Specifies if the TI mode is enabled or not .
+ This parameter can be a value of @ref SPI_TI_mode */
+
+ uint32_t CRCCalculation; /*!< Specifies if the CRC calculation is enabled or not.
+ This parameter can be a value of @ref SPI_CRC_Calculation */
+
+ uint32_t CRCPolynomial; /*!< Specifies the polynomial used for the CRC calculation.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 65535 */
+
+ uint32_t CRCLength; /*!< Specifies the CRC Length used for the CRC calculation.
+ CRC Length is only used with Data8 and Data16, not other data size
+ This parameter must 0 or 1 or 2*/
+
+ uint32_t NSSPMode; /*!< Specifies whether the NSSP signal is enabled or not .
+ This parameter can be a value of @ref SPI_NSSP_Mode
+ This mode is activated by the NSSP bit in the SPIx_CR2 register and
+ it takes effect only if the SPI interface is configured as Motorola SPI
+ master (FRF=0) with capture on the first edge (SPIx_CR1 CPHA = 0,
+ CPOL setting is ignored).. */
+} SPI_InitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_SPI_STATE_RESET = 0x00, /*!< Peripheral not Initialized */
+ HAL_SPI_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_SPI_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_SPI_STATE_BUSY_TX = 0x03, /*!< Data Transmission process is ongoing */
+ HAL_SPI_STATE_BUSY_RX = 0x04, /*!< Data Reception process is ongoing */
+ HAL_SPI_STATE_BUSY_TX_RX = 0x05, /*!< Data Transmission and Reception process is ongoing */
+ HAL_SPI_STATE_ERROR = 0x06 /*!< SPI error state */
+}HAL_SPI_StateTypeDef;
+
+/**
+ * @brief SPI handle Structure definition
+ */
+typedef struct __SPI_HandleTypeDef
+{
+ SPI_TypeDef *Instance; /*!< SPI registers base address */
+
+ SPI_InitTypeDef Init; /*!< SPI communication parameters */
+
+ uint8_t *pTxBuffPtr; /*!< Pointer to SPI Tx transfer Buffer */
+
+ uint16_t TxXferSize; /*!< SPI Tx Transfer size */
+
+ uint16_t TxXferCount; /*!< SPI Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /*!< Pointer to SPI Rx transfer Buffer */
+
+ uint16_t RxXferSize; /*!< SPI Rx Transfer size */
+
+ uint16_t RxXferCount; /*!< SPI Rx Transfer Counter */
+
+ uint32_t CRCSize; /*!< SPI CRC size used for the transfer */
+
+ void (*RxISR)(struct __SPI_HandleTypeDef *hspi); /*!< function pointer on Rx IRQ handler */
+
+ void (*TxISR)(struct __SPI_HandleTypeDef *hspi); /*!< function pointer on Tx IRQ handler */
+
+ DMA_HandleTypeDef *hdmatx; /*!< SPI Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< SPI Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< Locking object */
+
+ HAL_SPI_StateTypeDef State; /*!< SPI communication state */
+
+ __IO uint32_t ErrorCode; /*!< SPI Error code
+ This parameter can be a value of @ref SPI_Error */
+
+}SPI_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup SPI_Exported_Constants SPI Exported Constants
+ * @{
+ */
+
+/** @defgroup SPI_Error SPI Error
+ * @{
+ */
+ #define HAL_SPI_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+ #define HAL_SPI_ERROR_MODF ((uint32_t)0x00000001) /*!< MODF error */
+ #define HAL_SPI_ERROR_CRC ((uint32_t)0x00000002) /*!< CRC error */
+ #define HAL_SPI_ERROR_OVR ((uint32_t)0x00000004) /*!< OVR error */
+ #define HAL_SPI_ERROR_FRE ((uint32_t)0x00000008) /*!< FRE error */
+ #define HAL_SPI_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */
+ #define HAL_SPI_ERROR_FLAG ((uint32_t)0x00000020) /*!< Error on BSY/TXE/FTLVL/FRLVL Flag */
+ #define HAL_SPI_ERROR_UNKNOW ((uint32_t)0x00000040) /*!< Unknow Error error */
+/**
+ * @}
+ */
+
+/** @defgroup SPI_mode SPI mode
+ * @{
+ */
+#define SPI_MODE_SLAVE ((uint32_t)0x00000000)
+#define SPI_MODE_MASTER (SPI_CR1_MSTR | SPI_CR1_SSI)
+#define IS_SPI_MODE(MODE) (((MODE) == SPI_MODE_SLAVE) || \
+ ((MODE) == SPI_MODE_MASTER))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Direction SPI Direction
+ * @{
+ */
+#define SPI_DIRECTION_2LINES ((uint32_t)0x00000000)
+#define SPI_DIRECTION_2LINES_RXONLY SPI_CR1_RXONLY
+#define SPI_DIRECTION_1LINE SPI_CR1_BIDIMODE
+
+#define IS_SPI_DIRECTION(MODE) (((MODE) == SPI_DIRECTION_2LINES) || \
+ ((MODE) == SPI_DIRECTION_2LINES_RXONLY) ||\
+ ((MODE) == SPI_DIRECTION_1LINE))
+
+#define IS_SPI_DIRECTION_2LINES(MODE) ((MODE) == SPI_DIRECTION_2LINES)
+
+#define IS_SPI_DIRECTION_2LINES_OR_1LINE(MODE) (((MODE) == SPI_DIRECTION_2LINES)|| \
+ ((MODE) == SPI_DIRECTION_1LINE))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_data_size SPI Data size
+ * @{
+ */
+#define SPI_DATASIZE_4BIT ((uint32_t)0x0300) /*!< SPI Datasize = 4bits */
+#define SPI_DATASIZE_5BIT ((uint32_t)0x0400) /*!< SPI Datasize = 5bits */
+#define SPI_DATASIZE_6BIT ((uint32_t)0x0500) /*!< SPI Datasize = 6bits */
+#define SPI_DATASIZE_7BIT ((uint32_t)0x0600) /*!< SPI Datasize = 7bits */
+#define SPI_DATASIZE_8BIT ((uint32_t)0x0700) /*!< SPI Datasize = 8bits */
+#define SPI_DATASIZE_9BIT ((uint32_t)0x0800) /*!< SPI Datasize = 9bits */
+#define SPI_DATASIZE_10BIT ((uint32_t)0x0900) /*!< SPI Datasize = 10bits */
+#define SPI_DATASIZE_11BIT ((uint32_t)0x0A00) /*!< SPI Datasize = 11bits */
+#define SPI_DATASIZE_12BIT ((uint32_t)0x0B00) /*!< SPI Datasize = 12bits */
+#define SPI_DATASIZE_13BIT ((uint32_t)0x0C00) /*!< SPI Datasize = 13bits */
+#define SPI_DATASIZE_14BIT ((uint32_t)0x0D00) /*!< SPI Datasize = 14bits */
+#define SPI_DATASIZE_15BIT ((uint32_t)0x0E00) /*!< SPI Datasize = 15bits */
+#define SPI_DATASIZE_16BIT ((uint32_t)0x0F00) /*!< SPI Datasize = 16bits */
+#define IS_SPI_DATASIZE(DATASIZE) (((DATASIZE) == SPI_DATASIZE_16BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_15BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_14BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_13BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_12BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_11BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_10BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_9BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_8BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_7BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_6BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_5BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_4BIT))
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Clock_Polarity SPI Clock Polarity
+ * @{
+ */
+#define SPI_POLARITY_LOW ((uint32_t)0x00000000) /*!< SPI polarity Low */
+#define SPI_POLARITY_HIGH SPI_CR1_CPOL /*!< SPI polarity High */
+#define IS_SPI_CPOL(CPOL) (((CPOL) == SPI_POLARITY_LOW) || \
+ ((CPOL) == SPI_POLARITY_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Clock_Phase SPI Clock Phase
+ * @{
+ */
+#define SPI_PHASE_1EDGE ((uint32_t)0x00000000) /*!< SPI Phase 1EDGE */
+#define SPI_PHASE_2EDGE SPI_CR1_CPHA /*!< SPI Phase 2EDGE */
+#define IS_SPI_CPHA(CPHA) (((CPHA) == SPI_PHASE_1EDGE) || \
+ ((CPHA) == SPI_PHASE_2EDGE))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Slave_Select_management SPI Slave Select management
+ * @{
+ */
+#define SPI_NSS_SOFT SPI_CR1_SSM
+#define SPI_NSS_HARD_INPUT ((uint32_t)0x00000000)
+#define SPI_NSS_HARD_OUTPUT ((uint32_t)0x00040000)
+#define IS_SPI_NSS(NSS) (((NSS) == SPI_NSS_SOFT) || \
+ ((NSS) == SPI_NSS_HARD_INPUT) || \
+ ((NSS) == SPI_NSS_HARD_OUTPUT))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_NSSP_Mode SPI NSS pulse management
+ * @{
+ */
+#define SPI_NSS_PULSE_ENABLED SPI_CR2_NSSP
+#define SPI_NSS_PULSE_DISABLED ((uint32_t)0x00000000)
+
+#define IS_SPI_NSSP(NSSP) (((NSSP) == SPI_NSS_PULSE_ENABLED) || \
+ ((NSSP) == SPI_NSS_PULSE_DISABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_BaudRate_Prescaler SPI BaudRate Prescaler
+ * @{
+ */
+#define SPI_BAUDRATEPRESCALER_2 ((uint32_t)0x00000000)
+#define SPI_BAUDRATEPRESCALER_4 ((uint32_t)0x00000008)
+#define SPI_BAUDRATEPRESCALER_8 ((uint32_t)0x00000010)
+#define SPI_BAUDRATEPRESCALER_16 ((uint32_t)0x00000018)
+#define SPI_BAUDRATEPRESCALER_32 ((uint32_t)0x00000020)
+#define SPI_BAUDRATEPRESCALER_64 ((uint32_t)0x00000028)
+#define SPI_BAUDRATEPRESCALER_128 ((uint32_t)0x00000030)
+#define SPI_BAUDRATEPRESCALER_256 ((uint32_t)0x00000038)
+#define IS_SPI_BAUDRATE_PRESCALER(PRESCALER) (((PRESCALER) == SPI_BAUDRATEPRESCALER_2) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_4) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_8) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_16) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_32) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_64) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_128) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_256))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_MSB_LSB_transmission SPI MSB LSB transmission
+ * @{
+ */
+#define SPI_FIRSTBIT_MSB ((uint32_t)0x00000000)
+#define SPI_FIRSTBIT_LSB SPI_CR1_LSBFIRST
+#define IS_SPI_FIRST_BIT(BIT) (((BIT) == SPI_FIRSTBIT_MSB) || \
+ ((BIT) == SPI_FIRSTBIT_LSB))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_TI_mode SPI TI mode
+ * @{
+ */
+#define SPI_TIMODE_DISABLED ((uint32_t)0x00000000)
+#define SPI_TIMODE_ENABLED SPI_CR2_FRF
+#define IS_SPI_TIMODE(MODE) (((MODE) == SPI_TIMODE_DISABLED) || \
+ ((MODE) == SPI_TIMODE_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_CRC_Calculation SPI CRC Calculation
+ * @{
+ */
+#define SPI_CRCCALCULATION_DISABLED ((uint32_t)0x00000000)
+#define SPI_CRCCALCULATION_ENABLED SPI_CR1_CRCEN
+#define IS_SPI_CRC_CALCULATION(CALCULATION) (((CALCULATION) == SPI_CRCCALCULATION_DISABLED) || \
+ ((CALCULATION) == SPI_CRCCALCULATION_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_CRC_length SPI CRC length
+ * @{
+ * This parameter can be one of the following values:
+ * SPI_CRC_LENGTH_DATASIZE: aligned with the data size
+ * SPI_CRC_LENGTH_8BIT : CRC 8bit
+ * SPI_CRC_LENGTH_16BIT : CRC 16bit
+ */
+#define SPI_CRC_LENGTH_DATASIZE 0
+#define SPI_CRC_LENGTH_8BIT 1
+#define SPI_CRC_LENGTH_16BIT 2
+#define IS_SPI_CRC_LENGTH(LENGTH) (((LENGTH) == SPI_CRC_LENGTH_DATASIZE) ||\
+ ((LENGTH) == SPI_CRC_LENGTH_8BIT) || \
+ ((LENGTH) == SPI_CRC_LENGTH_16BIT))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_FIFO_reception_threshold SPI FIFO reception threshold
+ * @{
+ * This parameter can be one of the following values:
+ * SPI_RXFIFO_THRESHOLD or SPI_RXFIFO_THRESHOLD_QF :
+ * RXNE event is generated if the FIFO
+ * level is greater or equal to 1/2(16-bits).
+ * SPI_RXFIFO_THRESHOLD_HF: RXNE event is generated if the FIFO
+ * level is greater or equal to 1/4(8 bits). */
+#define SPI_RXFIFO_THRESHOLD SPI_CR2_FRXTH
+#define SPI_RXFIFO_THRESHOLD_QF SPI_CR2_FRXTH
+#define SPI_RXFIFO_THRESHOLD_HF ((uint32_t)0x0)
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Interrupt_configuration_definition SPI Interrupt configuration definition
+ * @brief SPI Interrupt definition
+ * Elements values convention: 0xXXXXXXXX
+ * - XXXXXXXX : Interrupt control mask
+ * @{
+ */
+#define SPI_IT_TXE SPI_CR2_TXEIE
+#define SPI_IT_RXNE SPI_CR2_RXNEIE
+#define SPI_IT_ERR SPI_CR2_ERRIE
+/**
+ * @}
+ */
+
+
+/** @defgroup SPI_Flag_definition SPI Flag definition
+ * @brief Flag definition
+ * Elements values convention: 0xXXXXYYYY
+ * - XXXX : Flag register Index
+ * - YYYY : Flag mask
+ * @{
+ */
+#define SPI_FLAG_RXNE SPI_SR_RXNE /* SPI status flag: Rx buffer not empty flag */
+#define SPI_FLAG_TXE SPI_SR_TXE /* SPI status flag: Tx buffer empty flag */
+#define SPI_FLAG_BSY SPI_SR_BSY /* SPI status flag: Busy flag */
+#define SPI_FLAG_CRCERR SPI_SR_CRCERR /* SPI Error flag: CRC error flag */
+#define SPI_FLAG_MODF SPI_SR_MODF /* SPI Error flag: Mode fault flag */
+#define SPI_FLAG_OVR SPI_SR_OVR /* SPI Error flag: Overrun flag */
+#define SPI_FLAG_FRE SPI_SR_FRE /* SPI Error flag: TI mode frame format error flag */
+#define SPI_FLAG_FTLVL SPI_SR_FTLVL /* SPI fifo transmission level */
+#define SPI_FLAG_FRLVL SPI_SR_FRLVL /* SPI fifo reception level */
+/**
+ * @}
+ */
+
+/** @defgroup SPI_transmission_fifo_status_level SPI transmission fifo status level
+ * @{
+ */
+#define SPI_FTLVL_EMPTY ((uint32_t)0x0000)
+#define SPI_FTLVL_QUARTER_FULL ((uint32_t)0x0800)
+#define SPI_FTLVL_HALF_FULL ((uint32_t)0x1000)
+#define SPI_FTLVL_FULL ((uint32_t)0x1800)
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_reception_fifo_status_level SPI reception fifo status level
+ * @{
+ */
+#define SPI_FRLVL_EMPTY ((uint32_t)0x0000)
+#define SPI_FRLVL_QUARTER_FULL ((uint32_t)0x0200)
+#define SPI_FRLVL_HALF_FULL ((uint32_t)0x0400)
+#define SPI_FRLVL_FULL ((uint32_t)0x0600)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/* Exported macros ------------------------------------------------------------*/
+/** @defgroup SPI_Exported_Macros SPI Exported Macros
+ * @{
+ */
+
+/** @brief Reset SPI handle state
+ * @param __HANDLE__: SPI handle.
+ * @retval None
+ */
+#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SPI_STATE_RESET)
+
+/** @brief Enables or disables the specified SPI interrupts.
+ * @param __HANDLE__ : specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @param __INTERRUPT__ : specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg SPI_IT_TXE: Tx buffer empty interrupt enable
+ * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg SPI_IT_ERR: Error interrupt enable
+ * @retval None
+ */
+#define __HAL_SPI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 |= (__INTERRUPT__))
+#define __HAL_SPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 &= (~(__INTERRUPT__)))
+
+/** @brief Checks if the specified SPI interrupt source is enabled or disabled.
+ * @param __HANDLE__ : specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @param __INTERRUPT__ : specifies the SPI interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SPI_IT_TXE: Tx buffer empty interrupt enable
+ * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg SPI_IT_ERR: Error interrupt enable
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_SPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Checks whether the specified SPI flag is set or not.
+ * @param __HANDLE__ : specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @param __FLAG__ : specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SPI_FLAG_RXNE: Receive buffer not empty flag
+ * @arg SPI_FLAG_TXE: Transmit buffer empty flag
+ * @arg SPI_FLAG_CRCERR: CRC error flag
+ * @arg SPI_FLAG_MODF: Mode fault flag
+ * @arg SPI_FLAG_OVR: Overrun flag
+ * @arg SPI_FLAG_BSY: Busy flag
+ * @arg SPI_FLAG_FRE: Frame format error flag
+ * @arg SPI_FLAG_FTLVL: SPI fifo transmission level
+ * @arg SPI_FLAG_FRLVL: SPI fifo reception level
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_SPI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the SPI CRCERR pending flag.
+ * @param __HANDLE__ : specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_CRCERRFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR = (uint16_t)(~SPI_FLAG_CRCERR))
+
+/** @brief Clears the SPI MODF pending flag.
+ * @param __HANDLE__ : specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ *
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_MODFFLAG(__HANDLE__) do{\
+ __IO uint32_t tmpreg;\
+ tmpreg = (__HANDLE__)->Instance->SR;\
+ UNUSED(tmpreg); \
+ (__HANDLE__)->Instance->CR1 &= (~SPI_CR1_SPE);\
+ }while(0)
+
+/** @brief Clears the SPI OVR pending flag.
+ * @param __HANDLE__ : specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ *
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_OVRFLAG(__HANDLE__) do{ \
+ __IO uint32_t tmpreg; \
+ tmpreg = (__HANDLE__)->Instance->DR; \
+ tmpreg = (__HANDLE__)->Instance->SR; \
+ UNUSED(tmpreg); \
+ } while(0)
+
+/** @brief Clears the SPI FRE pending flag.
+ * @param __HANDLE__ : specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ *
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_FREFLAG(__HANDLE__) do{\
+ __IO uint32_t tmpreg;\
+ tmpreg = ((__HANDLE__)->Instance->SR);\
+ UNUSED(tmpreg); \
+ }while(0)
+/** @brief Enables the SPI.
+ * @param __HANDLE__ : specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SPI_CR1_SPE)
+
+/** @brief Disables the SPI.
+ * @param __HANDLE__ : specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= (~SPI_CR1_SPE))
+
+/** @brief Sets the SPI transmit-only mode.
+ * @param __HANDLE__ : specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_1LINE_TX(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SPI_CR1_BIDIOE)
+
+/** @brief Sets the SPI receive-only mode.
+ * @param __HANDLE__ : specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_1LINE_RX(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= (~SPI_CR1_BIDIOE))
+
+/** @brief Resets the CRC calculation of the SPI.
+ * @param __HANDLE__ : specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_RESET_CRC(__HANDLE__) do{(__HANDLE__)->Instance->CR1 &= (uint16_t)(~SPI_CR1_CRCEN);\
+ (__HANDLE__)->Instance->CR1 |= SPI_CR1_CRCEN;}while(0)
+
+
+#define IS_SPI_CRC_POLYNOMIAL(POLYNOMIAL) (((POLYNOMIAL) >= 0x1) && ((POLYNOMIAL) <= 0xFFFF))
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SPI_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup SPI_Exported_Functions_Group1
+ * @{
+ */
+
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_InitExtended(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DeInit (SPI_HandleTypeDef *hspi);
+void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi);
+void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi);
+/**
+ * @}
+ */
+
+/** @addtogroup SPI_Exported_Functions_Group2
+ * @{
+ */
+
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_FlushRxFifo(SPI_HandleTypeDef *hspi);
+
+void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi);
+/**
+ * @}
+ */
+
+/** @addtogroup SPI_Exported_Functions_Group3
+ * @{
+ */
+
+/* Peripheral State and Error functions ***************************************/
+HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi);
+uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_SPI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/include/stm32f0xx_hal_tim.h b/f0/include/stm32f0xx_hal_tim.h
new file mode 100755
index 0000000000000000000000000000000000000000..61714b79802268df3038a82da31cc1bc4986e73f
--- /dev/null
+++ b/f0/include/stm32f0xx_hal_tim.h
@@ -0,0 +1,1645 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_tim.h
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief Header file of TIM HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_TIM_H
+#define __STM32F0xx_HAL_TIM_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup TIM
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup TIM_Exported_Types TIM Exported Types
+ * @{
+ */
+
+/**
+ * @brief TIM Time base Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+ uint32_t CounterMode; /*!< Specifies the counter mode.
+ This parameter can be a value of @ref TIM_Counter_Mode */
+
+ uint32_t Period; /*!< Specifies the period value to be loaded into the active
+ Auto-Reload Register at the next update event.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+ uint32_t ClockDivision; /*!< Specifies the clock division.
+ This parameter can be a value of @ref TIM_ClockDivision */
+
+ uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter
+ reaches zero, an update event is generated and counting restarts
+ from the RCR value (N).
+ This means in PWM mode that (N+1) corresponds to:
+ - the number of PWM periods in edge-aligned mode
+ - the number of half PWM period in center-aligned mode
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.
+ @note This parameter is valid only for TIM1 and TIM8. */
+} TIM_Base_InitTypeDef;
+
+/**
+ * @brief TIM Output Compare Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t OCMode; /*!< Specifies the TIM mode.
+ This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */
+
+ uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+ uint32_t OCPolarity; /*!< Specifies the output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_Polarity */
+
+ uint32_t OCNPolarity; /*!< Specifies the complementary output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCFastMode; /*!< Specifies the Fast mode state.
+ This parameter can be a value of @ref TIM_Output_Fast_State
+ @note This parameter is valid only in PWM1 and PWM2 mode. */
+
+
+ uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+} TIM_OC_InitTypeDef;
+
+/**
+ * @brief TIM One Pulse Mode Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t OCMode; /*!< Specifies the TIM mode.
+ This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */
+
+ uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+ uint32_t OCPolarity; /*!< Specifies the output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_Polarity */
+
+ uint32_t OCNPolarity; /*!< Specifies the complementary output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t ICPolarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t ICSelection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t ICFilter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_OnePulse_InitTypeDef;
+
+
+/**
+ * @brief TIM Input Capture Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t ICPolarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t ICSelection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t ICFilter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_IC_InitTypeDef;
+
+/**
+ * @brief TIM Encoder Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t EncoderMode; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Encoder_Mode */
+
+ uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t IC1Selection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t IC1Filter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+
+ uint32_t IC2Polarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t IC2Selection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t IC2Prescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t IC2Filter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_Encoder_InitTypeDef;
+
+
+/**
+ * @brief Clock Configuration Handle Structure definition
+ */
+typedef struct
+{
+ uint32_t ClockSource; /*!< TIM clock sources
+ This parameter can be a value of @ref TIM_Clock_Source */
+ uint32_t ClockPolarity; /*!< TIM clock polarity
+ This parameter can be a value of @ref TIM_Clock_Polarity */
+ uint32_t ClockPrescaler; /*!< TIM clock prescaler
+ This parameter can be a value of @ref TIM_Clock_Prescaler */
+ uint32_t ClockFilter; /*!< TIM clock filter
+ This parameter can be a value of @ref TIM_Clock_Filter */
+}TIM_ClockConfigTypeDef;
+
+/**
+ * @brief Clear Input Configuration Handle Structure definition
+ */
+typedef struct
+{
+ uint32_t ClearInputState; /*!< TIM clear Input state
+ This parameter can be ENABLE or DISABLE */
+ uint32_t ClearInputSource; /*!< TIM clear Input sources
+ This parameter can be a value of @ref TIM_ClearInput_Source */
+ uint32_t ClearInputPolarity; /*!< TIM Clear Input polarity
+ This parameter can be a value of @ref TIM_ClearInput_Polarity */
+ uint32_t ClearInputPrescaler; /*!< TIM Clear Input prescaler
+ This parameter can be a value of @ref TIM_ClearInput_Prescaler */
+ uint32_t ClearInputFilter; /*!< TIM Clear Input filter
+ This parameter can be a value of @ref TIM_ClearInput_Filter */
+}TIM_ClearInputConfigTypeDef;
+
+/**
+ * @brief TIM Slave configuration Structure definition
+ */
+typedef struct {
+ uint32_t SlaveMode; /*!< Slave mode selection
+ This parameter can be a value of @ref TIM_Slave_Mode */
+ uint32_t InputTrigger; /*!< Input Trigger source
+ This parameter can be a value of @ref TIM_Trigger_Selection */
+ uint32_t TriggerPolarity; /*!< Input Trigger polarity
+ This parameter can be a value of @ref TIM_Trigger_Polarity */
+ uint32_t TriggerPrescaler; /*!< Input trigger prescaler
+ This parameter can be a value of @ref TIM_Trigger_Prescaler */
+ uint32_t TriggerFilter; /*!< Input trigger filter
+ This parameter can be a value of @ref TIM_Trigger_Filter */
+
+}TIM_SlaveConfigTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_TIM_STATE_RESET = 0x00, /*!< Peripheral not yet initialized or disabled */
+ HAL_TIM_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_TIM_STATE_BUSY = 0x02, /*!< An internal process is ongoing */
+ HAL_TIM_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_TIM_STATE_ERROR = 0x04 /*!< Reception process is ongoing */
+}HAL_TIM_StateTypeDef;
+
+/**
+ * @brief HAL Active channel structures definition
+ */
+typedef enum
+{
+ HAL_TIM_ACTIVE_CHANNEL_1 = 0x01, /*!< The active channel is 1 */
+ HAL_TIM_ACTIVE_CHANNEL_2 = 0x02, /*!< The active channel is 2 */
+ HAL_TIM_ACTIVE_CHANNEL_3 = 0x04, /*!< The active channel is 3 */
+ HAL_TIM_ACTIVE_CHANNEL_4 = 0x08, /*!< The active channel is 4 */
+ HAL_TIM_ACTIVE_CHANNEL_CLEARED = 0x00 /*!< All active channels cleared */
+}HAL_TIM_ActiveChannel;
+
+/**
+ * @brief TIM Time Base Handle Structure definition
+ */
+typedef struct
+{
+ TIM_TypeDef *Instance; /*!< Register base address */
+ TIM_Base_InitTypeDef Init; /*!< TIM Time Base required parameters */
+ HAL_TIM_ActiveChannel Channel; /*!< Active channel */
+ DMA_HandleTypeDef *hdma[7]; /*!< DMA Handlers array
+ This array is accessed by a @ref TIM_DMA_Handle_index */
+ HAL_LockTypeDef Lock; /*!< Locking object */
+ __IO HAL_TIM_StateTypeDef State; /*!< TIM operation state */
+}TIM_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup TIM_Exported_Constants TIM Exported Constants
+ * @{
+ */
+
+/** @defgroup TIM_Input_Channel_Polarity TIM Input Channel polarity
+ * @{
+ */
+#define TIM_INPUTCHANNELPOLARITY_RISING ((uint32_t)0x00000000) /*!< Polarity for TIx source */
+#define TIM_INPUTCHANNELPOLARITY_FALLING (TIM_CCER_CC1P) /*!< Polarity for TIx source */
+#define TIM_INPUTCHANNELPOLARITY_BOTHEDGE (TIM_CCER_CC1P | TIM_CCER_CC1NP) /*!< Polarity for TIx source */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ETR_Polarity TIM ETR Polarity
+ * @{
+ */
+#define TIM_ETRPOLARITY_INVERTED (TIM_SMCR_ETP) /*!< Polarity for ETR source */
+#define TIM_ETRPOLARITY_NONINVERTED ((uint32_t)0x0000) /*!< Polarity for ETR source */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ETR_Prescaler TIM ETR Prescaler
+ * @{
+ */
+#define TIM_ETRPRESCALER_DIV1 ((uint32_t)0x0000) /*!< No prescaler is used */
+#define TIM_ETRPRESCALER_DIV2 (TIM_SMCR_ETPS_0) /*!< ETR input source is divided by 2 */
+#define TIM_ETRPRESCALER_DIV4 (TIM_SMCR_ETPS_1) /*!< ETR input source is divided by 4 */
+#define TIM_ETRPRESCALER_DIV8 (TIM_SMCR_ETPS) /*!< ETR input source is divided by 8 */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Counter_Mode TIM Counter Mode
+ * @{
+ */
+
+#define TIM_COUNTERMODE_UP ((uint32_t)0x0000)
+#define TIM_COUNTERMODE_DOWN TIM_CR1_DIR
+#define TIM_COUNTERMODE_CENTERALIGNED1 TIM_CR1_CMS_0
+#define TIM_COUNTERMODE_CENTERALIGNED2 TIM_CR1_CMS_1
+#define TIM_COUNTERMODE_CENTERALIGNED3 TIM_CR1_CMS
+
+#define IS_TIM_COUNTER_MODE(MODE) (((MODE) == TIM_COUNTERMODE_UP) || \
+ ((MODE) == TIM_COUNTERMODE_DOWN) || \
+ ((MODE) == TIM_COUNTERMODE_CENTERALIGNED1) || \
+ ((MODE) == TIM_COUNTERMODE_CENTERALIGNED2) || \
+ ((MODE) == TIM_COUNTERMODE_CENTERALIGNED3))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClockDivision TIM Clock Division
+ * @{
+ */
+
+#define TIM_CLOCKDIVISION_DIV1 ((uint32_t)0x0000)
+#define TIM_CLOCKDIVISION_DIV2 (TIM_CR1_CKD_0)
+#define TIM_CLOCKDIVISION_DIV4 (TIM_CR1_CKD_1)
+
+#define IS_TIM_CLOCKDIVISION_DIV(DIV) (((DIV) == TIM_CLOCKDIVISION_DIV1) || \
+ ((DIV) == TIM_CLOCKDIVISION_DIV2) || \
+ ((DIV) == TIM_CLOCKDIVISION_DIV4))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_and_PWM_modes TIM Output Compare & PWM modes
+ * @{
+ */
+
+#define TIM_OCMODE_TIMING ((uint32_t)0x0000)
+#define TIM_OCMODE_ACTIVE (TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_INACTIVE (TIM_CCMR1_OC1M_1)
+#define TIM_OCMODE_TOGGLE (TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_1)
+#define TIM_OCMODE_PWM1 (TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_PWM2 (TIM_CCMR1_OC1M)
+#define TIM_OCMODE_FORCED_ACTIVE (TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_FORCED_INACTIVE (TIM_CCMR1_OC1M_2)
+
+#define IS_TIM_PWM_MODE(MODE) (((MODE) == TIM_OCMODE_PWM1) || \
+ ((MODE) == TIM_OCMODE_PWM2))
+
+#define IS_TIM_OC_MODE(MODE) (((MODE) == TIM_OCMODE_TIMING) || \
+ ((MODE) == TIM_OCMODE_ACTIVE) || \
+ ((MODE) == TIM_OCMODE_INACTIVE) || \
+ ((MODE) == TIM_OCMODE_TOGGLE) || \
+ ((MODE) == TIM_OCMODE_FORCED_ACTIVE) || \
+ ((MODE) == TIM_OCMODE_FORCED_INACTIVE))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_State TIM Output Compare State
+ * @{
+ */
+
+#define TIM_OUTPUTSTATE_DISABLE ((uint32_t)0x0000)
+#define TIM_OUTPUTSTATE_ENABLE (TIM_CCER_CC1E)
+
+#define IS_TIM_OUTPUT_STATE(STATE) (((STATE) == TIM_OUTPUTSTATE_DISABLE) || \
+ ((STATE) == TIM_OUTPUTSTATE_ENABLE))
+/**
+ * @}
+ */
+/** @defgroup TIM_Output_Fast_State TIM Output Fast State
+ * @{
+ */
+#define TIM_OCFAST_DISABLE ((uint32_t)0x0000)
+#define TIM_OCFAST_ENABLE (TIM_CCMR1_OC1FE)
+
+#define IS_TIM_FAST_STATE(STATE) (((STATE) == TIM_OCFAST_DISABLE) || \
+ ((STATE) == TIM_OCFAST_ENABLE))
+/**
+ * @}
+ */
+/** @defgroup TIM_Output_Compare_N_State TIM Complementary Output Compare State
+ * @{
+ */
+
+#define TIM_OUTPUTNSTATE_DISABLE ((uint32_t)0x0000)
+#define TIM_OUTPUTNSTATE_ENABLE (TIM_CCER_CC1NE)
+
+#define IS_TIM_OUTPUTN_STATE(STATE) (((STATE) == TIM_OUTPUTNSTATE_DISABLE) || \
+ ((STATE) == TIM_OUTPUTNSTATE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Polarity TIM Output Compare Polarity
+ * @{
+ */
+
+#define TIM_OCPOLARITY_HIGH ((uint32_t)0x0000)
+#define TIM_OCPOLARITY_LOW (TIM_CCER_CC1P)
+
+#define IS_TIM_OC_POLARITY(POLARITY) (((POLARITY) == TIM_OCPOLARITY_HIGH) || \
+ ((POLARITY) == TIM_OCPOLARITY_LOW))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_N_Polarity TIM Complementary Output Compare Polarity
+ * @{
+ */
+
+#define TIM_OCNPOLARITY_HIGH ((uint32_t)0x0000)
+#define TIM_OCNPOLARITY_LOW (TIM_CCER_CC1NP)
+
+#define IS_TIM_OCN_POLARITY(POLARITY) (((POLARITY) == TIM_OCNPOLARITY_HIGH) || \
+ ((POLARITY) == TIM_OCNPOLARITY_LOW))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Idle_State TIM Output Compare Idle State
+ * @{
+ */
+
+#define TIM_OCIDLESTATE_SET (TIM_CR2_OIS1)
+#define TIM_OCIDLESTATE_RESET ((uint32_t)0x0000)
+#define IS_TIM_OCIDLE_STATE(STATE) (((STATE) == TIM_OCIDLESTATE_SET) || \
+ ((STATE) == TIM_OCIDLESTATE_RESET))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_N_Idle_State TIM Complementary Output Compare Idle State
+ * @{
+ */
+
+#define TIM_OCNIDLESTATE_SET (TIM_CR2_OIS1N)
+#define TIM_OCNIDLESTATE_RESET ((uint32_t)0x0000)
+#define IS_TIM_OCNIDLE_STATE(STATE) (((STATE) == TIM_OCNIDLESTATE_SET) || \
+ ((STATE) == TIM_OCNIDLESTATE_RESET))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Channel TIM Channel
+ * @{
+ */
+#define TIM_CHANNEL_1 ((uint32_t)0x0000)
+#define TIM_CHANNEL_2 ((uint32_t)0x0004)
+#define TIM_CHANNEL_3 ((uint32_t)0x0008)
+#define TIM_CHANNEL_4 ((uint32_t)0x000C)
+#define TIM_CHANNEL_ALL ((uint32_t)0x0018)
+
+#define IS_TIM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4) || \
+ ((CHANNEL) == TIM_CHANNEL_ALL))
+
+#define IS_TIM_PWMI_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))
+
+#define IS_TIM_OPM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))
+
+#define IS_TIM_COMPLEMENTARY_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Polarity TIM Input Capture Polarity
+ * @{
+ */
+
+#define TIM_ICPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING
+#define TIM_ICPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING
+#define TIM_ICPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE
+
+#define IS_TIM_IC_POLARITY(POLARITY) (((POLARITY) == TIM_ICPOLARITY_RISING) || \
+ ((POLARITY) == TIM_ICPOLARITY_FALLING) || \
+ ((POLARITY) == TIM_ICPOLARITY_BOTHEDGE))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Selection TIM Input Capture Selection
+ * @{
+ */
+
+#define TIM_ICSELECTION_DIRECTTI (TIM_CCMR1_CC1S_0) /*!< TIM Input 1, 2, 3 or 4 is selected to be
+ connected to IC1, IC2, IC3 or IC4, respectively */
+#define TIM_ICSELECTION_INDIRECTTI (TIM_CCMR1_CC1S_1) /*!< TIM Input 1, 2, 3 or 4 is selected to be
+ connected to IC2, IC1, IC4 or IC3, respectively */
+#define TIM_ICSELECTION_TRC (TIM_CCMR1_CC1S) /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC */
+
+#define IS_TIM_IC_SELECTION(SELECTION) (((SELECTION) == TIM_ICSELECTION_DIRECTTI) || \
+ ((SELECTION) == TIM_ICSELECTION_INDIRECTTI) || \
+ ((SELECTION) == TIM_ICSELECTION_TRC))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Prescaler TIM Input Capture Prescaler
+ * @{
+ */
+
+#define TIM_ICPSC_DIV1 ((uint32_t)0x0000) /*!< Capture performed each time an edge is detected on the capture input */
+#define TIM_ICPSC_DIV2 (TIM_CCMR1_IC1PSC_0) /*!< Capture performed once every 2 events */
+#define TIM_ICPSC_DIV4 (TIM_CCMR1_IC1PSC_1) /*!< Capture performed once every 4 events */
+#define TIM_ICPSC_DIV8 (TIM_CCMR1_IC1PSC) /*!< Capture performed once every 8 events */
+
+#define IS_TIM_IC_PRESCALER(PRESCALER) (((PRESCALER) == TIM_ICPSC_DIV1) || \
+ ((PRESCALER) == TIM_ICPSC_DIV2) || \
+ ((PRESCALER) == TIM_ICPSC_DIV4) || \
+ ((PRESCALER) == TIM_ICPSC_DIV8))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_One_Pulse_Mode TIM One Pulse Mode
+ * @{
+ */
+
+#define TIM_OPMODE_SINGLE (TIM_CR1_OPM)
+#define TIM_OPMODE_REPETITIVE ((uint32_t)0x0000)
+
+#define IS_TIM_OPM_MODE(MODE) (((MODE) == TIM_OPMODE_SINGLE) || \
+ ((MODE) == TIM_OPMODE_REPETITIVE))
+/**
+ * @}
+ */
+/** @defgroup TIM_Encoder_Mode TIM Encoder Mode
+ * @{
+ */
+#define TIM_ENCODERMODE_TI1 (TIM_SMCR_SMS_0)
+#define TIM_ENCODERMODE_TI2 (TIM_SMCR_SMS_1)
+#define TIM_ENCODERMODE_TI12 (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0)
+
+#define IS_TIM_ENCODER_MODE(MODE) (((MODE) == TIM_ENCODERMODE_TI1) || \
+ ((MODE) == TIM_ENCODERMODE_TI2) || \
+ ((MODE) == TIM_ENCODERMODE_TI12))
+/**
+ * @}
+ */
+/** @defgroup TIM_Interrupt_definition TIM interrupt Definition
+ * @{
+ */
+#define TIM_IT_UPDATE (TIM_DIER_UIE)
+#define TIM_IT_CC1 (TIM_DIER_CC1IE)
+#define TIM_IT_CC2 (TIM_DIER_CC2IE)
+#define TIM_IT_CC3 (TIM_DIER_CC3IE)
+#define TIM_IT_CC4 (TIM_DIER_CC4IE)
+#define TIM_IT_COM (TIM_DIER_COMIE)
+#define TIM_IT_TRIGGER (TIM_DIER_TIE)
+#define TIM_IT_BREAK (TIM_DIER_BIE)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_COMMUTATION TIM Commutation
+ * @{
+ */
+#define TIM_COMMUTATION_TRGI (TIM_CR2_CCUS)
+#define TIM_COMMUTATION_SOFTWARE ((uint32_t)0x0000)
+
+/**
+ * @}
+ */
+/** @defgroup TIM_DMA_sources TIM DMA Sources
+ * @{
+ */
+
+#define TIM_DMA_UPDATE (TIM_DIER_UDE)
+#define TIM_DMA_CC1 (TIM_DIER_CC1DE)
+#define TIM_DMA_CC2 (TIM_DIER_CC2DE)
+#define TIM_DMA_CC3 (TIM_DIER_CC3DE)
+#define TIM_DMA_CC4 (TIM_DIER_CC4DE)
+#define TIM_DMA_COM (TIM_DIER_COMDE)
+#define TIM_DMA_TRIGGER (TIM_DIER_TDE)
+
+#define IS_TIM_DMA_SOURCE(SOURCE) ((((SOURCE) & 0xFFFF80FF) == 0x00000000) && ((SOURCE) != 0x00000000))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Event_Source TIM Event Source
+ * @{
+ */
+#define TIM_EventSource_Update TIM_EGR_UG
+#define TIM_EventSource_CC1 TIM_EGR_CC1G
+#define TIM_EventSource_CC2 TIM_EGR_CC2G
+#define TIM_EventSource_CC3 TIM_EGR_CC3G
+#define TIM_EventSource_CC4 TIM_EGR_CC4G
+#define TIM_EventSource_COM TIM_EGR_COMG
+#define TIM_EventSource_Trigger TIM_EGR_TG
+#define TIM_EventSource_Break TIM_EGR_BG
+
+#define IS_TIM_EVENT_SOURCE(SOURCE) ((((SOURCE) & 0xFFFFFF00) == 0x00000000) && ((SOURCE) != 0x00000000))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Flag_definition TIM Flag Definition
+ * @{
+ */
+
+#define TIM_FLAG_UPDATE (TIM_SR_UIF)
+#define TIM_FLAG_CC1 (TIM_SR_CC1IF)
+#define TIM_FLAG_CC2 (TIM_SR_CC2IF)
+#define TIM_FLAG_CC3 (TIM_SR_CC3IF)
+#define TIM_FLAG_CC4 (TIM_SR_CC4IF)
+#define TIM_FLAG_COM (TIM_SR_COMIF)
+#define TIM_FLAG_TRIGGER (TIM_SR_TIF)
+#define TIM_FLAG_BREAK (TIM_SR_BIF)
+#define TIM_FLAG_CC1OF (TIM_SR_CC1OF)
+#define TIM_FLAG_CC2OF (TIM_SR_CC2OF)
+#define TIM_FLAG_CC3OF (TIM_SR_CC3OF)
+#define TIM_FLAG_CC4OF (TIM_SR_CC4OF)
+
+#define IS_TIM_FLAG(FLAG) (((FLAG) == TIM_FLAG_UPDATE) || \
+ ((FLAG) == TIM_FLAG_CC1) || \
+ ((FLAG) == TIM_FLAG_CC2) || \
+ ((FLAG) == TIM_FLAG_CC3) || \
+ ((FLAG) == TIM_FLAG_CC4) || \
+ ((FLAG) == TIM_FLAG_COM) || \
+ ((FLAG) == TIM_FLAG_TRIGGER) || \
+ ((FLAG) == TIM_FLAG_BREAK) || \
+ ((FLAG) == TIM_FLAG_CC1OF) || \
+ ((FLAG) == TIM_FLAG_CC2OF) || \
+ ((FLAG) == TIM_FLAG_CC3OF) || \
+ ((FLAG) == TIM_FLAG_CC4OF))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Clock_Source TIM Clock Source
+ * @{
+ */
+#define TIM_CLOCKSOURCE_ETRMODE2 (TIM_SMCR_ETPS_1)
+#define TIM_CLOCKSOURCE_INTERNAL (TIM_SMCR_ETPS_0)
+#define TIM_CLOCKSOURCE_ITR0 ((uint32_t)0x0000)
+#define TIM_CLOCKSOURCE_ITR1 (TIM_SMCR_TS_0)
+#define TIM_CLOCKSOURCE_ITR2 (TIM_SMCR_TS_1)
+#define TIM_CLOCKSOURCE_ITR3 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1)
+#define TIM_CLOCKSOURCE_TI1ED (TIM_SMCR_TS_2)
+#define TIM_CLOCKSOURCE_TI1 (TIM_SMCR_TS_0 | TIM_SMCR_TS_2)
+#define TIM_CLOCKSOURCE_TI2 (TIM_SMCR_TS_1 | TIM_SMCR_TS_2)
+#define TIM_CLOCKSOURCE_ETRMODE1 (TIM_SMCR_TS)
+
+#define IS_TIM_CLOCKSOURCE(CLOCK) (((CLOCK) == TIM_CLOCKSOURCE_INTERNAL) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ETRMODE2) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ITR0) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ITR1) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ITR2) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ITR3) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_TI1ED) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_TI1) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_TI2) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ETRMODE1))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Clock_Polarity TIM Clock Polarity
+ * @{
+ */
+#define TIM_CLOCKPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx clock sources */
+#define TIM_CLOCKPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx clock sources */
+#define TIM_CLOCKPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIx clock sources */
+#define TIM_CLOCKPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIx clock sources */
+#define TIM_CLOCKPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIx clock sources */
+
+#define IS_TIM_CLOCKPOLARITY(POLARITY) (((POLARITY) == TIM_CLOCKPOLARITY_INVERTED) || \
+ ((POLARITY) == TIM_CLOCKPOLARITY_NONINVERTED) || \
+ ((POLARITY) == TIM_CLOCKPOLARITY_RISING) || \
+ ((POLARITY) == TIM_CLOCKPOLARITY_FALLING) || \
+ ((POLARITY) == TIM_CLOCKPOLARITY_BOTHEDGE))
+/**
+ * @}
+ */
+/** @defgroup TIM_Clock_Prescaler TIM Clock Prescaler
+ * @{
+ */
+#define TIM_CLOCKPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
+#define TIM_CLOCKPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Clock: Capture performed once every 2 events. */
+#define TIM_CLOCKPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Clock: Capture performed once every 4 events. */
+#define TIM_CLOCKPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Clock: Capture performed once every 8 events. */
+
+#define IS_TIM_CLOCKPRESCALER(PRESCALER) (((PRESCALER) == TIM_CLOCKPRESCALER_DIV1) || \
+ ((PRESCALER) == TIM_CLOCKPRESCALER_DIV2) || \
+ ((PRESCALER) == TIM_CLOCKPRESCALER_DIV4) || \
+ ((PRESCALER) == TIM_CLOCKPRESCALER_DIV8))
+/**
+ * @}
+ */
+/** @defgroup TIM_Clock_Filter TIM Clock Filter
+ * @{
+ */
+
+#define IS_TIM_CLOCKFILTER(ICFILTER) ((ICFILTER) <= 0xF)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClearInput_Source TIM ClearInput Source
+ * @{
+ */
+#define TIM_CLEARINPUTSOURCE_ETR ((uint32_t)0x0001)
+#define TIM_CLEARINPUTSOURCE_NONE ((uint32_t)0x0000)
+
+#define IS_TIM_CLEARINPUT_SOURCE(SOURCE) (((SOURCE) == TIM_CLEARINPUTSOURCE_NONE) || \
+ ((SOURCE) == TIM_CLEARINPUTSOURCE_ETR))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClearInput_Polarity TIM Clear Input Polarity
+ * @{
+ */
+#define TIM_CLEARINPUTPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx pin */
+#define TIM_CLEARINPUTPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx pin */
+
+
+#define IS_TIM_CLEARINPUT_POLARITY(POLARITY) (((POLARITY) == TIM_CLEARINPUTPOLARITY_INVERTED) || \
+ ((POLARITY) == TIM_CLEARINPUTPOLARITY_NONINVERTED))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClearInput_Prescaler TIM Clear Input Prescaler
+ * @{
+ */
+#define TIM_CLEARINPUTPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
+#define TIM_CLEARINPUTPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR pin: Capture performed once every 2 events. */
+#define TIM_CLEARINPUTPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR pin: Capture performed once every 4 events. */
+#define TIM_CLEARINPUTPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR pin: Capture performed once every 8 events. */
+
+#define IS_TIM_CLEARINPUT_PRESCALER(PRESCALER) (((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV1) || \
+ ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV2) || \
+ ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV4) || \
+ ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV8))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClearInput_Filter TIM Clear Input Filter
+ * @{
+ */
+
+#define IS_TIM_CLEARINPUT_FILTER(ICFILTER) ((ICFILTER) <= 0xF)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_OSSR_Off_State_Selection_for_Run_mode_state TIM Off-state Selection for Run Mode
+ * @{
+ */
+#define TIM_OSSR_ENABLE (TIM_BDTR_OSSR)
+#define TIM_OSSR_DISABLE ((uint32_t)0x0000)
+
+#define IS_TIM_OSSR_STATE(STATE) (((STATE) == TIM_OSSR_ENABLE) || \
+ ((STATE) == TIM_OSSR_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_OSSI_Off_State_Selection_for_Idle_mode_state TIM Off-state Selection for Idle Mode
+ * @{
+ */
+#define TIM_OSSI_ENABLE (TIM_BDTR_OSSI)
+#define TIM_OSSI_DISABLE ((uint32_t)0x0000)
+
+#define IS_TIM_OSSI_STATE(STATE) (((STATE) == TIM_OSSI_ENABLE) || \
+ ((STATE) == TIM_OSSI_DISABLE))
+/**
+ * @}
+ */
+/** @defgroup TIM_Lock_level TIM Lock Configuration
+ * @{
+ */
+#define TIM_LOCKLEVEL_OFF ((uint32_t)0x0000)
+#define TIM_LOCKLEVEL_1 (TIM_BDTR_LOCK_0)
+#define TIM_LOCKLEVEL_2 (TIM_BDTR_LOCK_1)
+#define TIM_LOCKLEVEL_3 (TIM_BDTR_LOCK)
+
+#define IS_TIM_LOCK_LEVEL(LEVEL) (((LEVEL) == TIM_LOCKLEVEL_OFF) || \
+ ((LEVEL) == TIM_LOCKLEVEL_1) || \
+ ((LEVEL) == TIM_LOCKLEVEL_2) || \
+ ((LEVEL) == TIM_LOCKLEVEL_3))
+/**
+ * @}
+ */
+/** @defgroup TIM_Break_Input_enable_disable TIM Break Input Enable
+ * @{
+ */
+#define TIM_BREAK_ENABLE (TIM_BDTR_BKE)
+#define TIM_BREAK_DISABLE ((uint32_t)0x0000)
+
+#define IS_TIM_BREAK_STATE(STATE) (((STATE) == TIM_BREAK_ENABLE) || \
+ ((STATE) == TIM_BREAK_DISABLE))
+/**
+ * @}
+ */
+/** @defgroup TIM_Break_Polarity TIM Break Input Polarity
+ * @{
+ */
+#define TIM_BREAKPOLARITY_LOW ((uint32_t)0x0000)
+#define TIM_BREAKPOLARITY_HIGH (TIM_BDTR_BKP)
+
+#define IS_TIM_BREAK_POLARITY(POLARITY) (((POLARITY) == TIM_BREAKPOLARITY_LOW) || \
+ ((POLARITY) == TIM_BREAKPOLARITY_HIGH))
+/**
+ * @}
+ */
+/** @defgroup TIM_AOE_Bit_Set_Reset TIM Automatic Output Enable
+ * @{
+ */
+#define TIM_AUTOMATICOUTPUT_ENABLE (TIM_BDTR_AOE)
+#define TIM_AUTOMATICOUTPUT_DISABLE ((uint32_t)0x0000)
+
+#define IS_TIM_AUTOMATIC_OUTPUT_STATE(STATE) (((STATE) == TIM_AUTOMATICOUTPUT_ENABLE) || \
+ ((STATE) == TIM_AUTOMATICOUTPUT_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Master_Mode_Selection TIM Master Mode Selection
+ * @{
+ */
+#define TIM_TRGO_RESET ((uint32_t)0x0000)
+#define TIM_TRGO_ENABLE (TIM_CR2_MMS_0)
+#define TIM_TRGO_UPDATE (TIM_CR2_MMS_1)
+#define TIM_TRGO_OC1 ((TIM_CR2_MMS_1 | TIM_CR2_MMS_0))
+#define TIM_TRGO_OC1REF (TIM_CR2_MMS_2)
+#define TIM_TRGO_OC2REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_0))
+#define TIM_TRGO_OC3REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_1))
+#define TIM_TRGO_OC4REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0))
+
+#define IS_TIM_TRGO_SOURCE(SOURCE) (((SOURCE) == TIM_TRGO_RESET) || \
+ ((SOURCE) == TIM_TRGO_ENABLE) || \
+ ((SOURCE) == TIM_TRGO_UPDATE) || \
+ ((SOURCE) == TIM_TRGO_OC1) || \
+ ((SOURCE) == TIM_TRGO_OC1REF) || \
+ ((SOURCE) == TIM_TRGO_OC2REF) || \
+ ((SOURCE) == TIM_TRGO_OC3REF) || \
+ ((SOURCE) == TIM_TRGO_OC4REF))
+
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Slave_Mode TIM Slave Mode
+ * @{
+ */
+
+#define TIM_SLAVEMODE_DISABLE ((uint32_t)0x0000)
+#define TIM_SLAVEMODE_RESET ((uint32_t)0x0004)
+#define TIM_SLAVEMODE_GATED ((uint32_t)0x0005)
+#define TIM_SLAVEMODE_TRIGGER ((uint32_t)0x0006)
+#define TIM_SLAVEMODE_EXTERNAL1 ((uint32_t)0x0007)
+
+#define IS_TIM_SLAVE_MODE(MODE) (((MODE) == TIM_SLAVEMODE_DISABLE) || \
+ ((MODE) == TIM_SLAVEMODE_GATED) || \
+ ((MODE) == TIM_SLAVEMODE_RESET) || \
+ ((MODE) == TIM_SLAVEMODE_TRIGGER) || \
+ ((MODE) == TIM_SLAVEMODE_EXTERNAL1))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Master_Slave_Mode TIM Master/Slave Mode
+ * @{
+ */
+
+#define TIM_MASTERSLAVEMODE_ENABLE ((uint32_t)0x0080)
+#define TIM_MASTERSLAVEMODE_DISABLE ((uint32_t)0x0000)
+
+#define IS_TIM_MSM_STATE(STATE) (((STATE) == TIM_MASTERSLAVEMODE_ENABLE) || \
+ ((STATE) == TIM_MASTERSLAVEMODE_DISABLE))
+/**
+ * @}
+ */
+/** @defgroup TIM_Trigger_Selection TIM Trigger Selection
+ * @{
+ */
+
+#define TIM_TS_ITR0 ((uint32_t)0x0000)
+#define TIM_TS_ITR1 ((uint32_t)0x0010)
+#define TIM_TS_ITR2 ((uint32_t)0x0020)
+#define TIM_TS_ITR3 ((uint32_t)0x0030)
+#define TIM_TS_TI1F_ED ((uint32_t)0x0040)
+#define TIM_TS_TI1FP1 ((uint32_t)0x0050)
+#define TIM_TS_TI2FP2 ((uint32_t)0x0060)
+#define TIM_TS_ETRF ((uint32_t)0x0070)
+#define TIM_TS_NONE ((uint32_t)0xFFFF)
+
+#define IS_TIM_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
+ ((SELECTION) == TIM_TS_ITR1) || \
+ ((SELECTION) == TIM_TS_ITR2) || \
+ ((SELECTION) == TIM_TS_ITR3) || \
+ ((SELECTION) == TIM_TS_TI1F_ED) || \
+ ((SELECTION) == TIM_TS_TI1FP1) || \
+ ((SELECTION) == TIM_TS_TI2FP2) || \
+ ((SELECTION) == TIM_TS_ETRF))
+
+#define IS_TIM_INTERNAL_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
+ ((SELECTION) == TIM_TS_ITR1) || \
+ ((SELECTION) == TIM_TS_ITR2) || \
+ ((SELECTION) == TIM_TS_ITR3))
+
+#define IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
+ ((SELECTION) == TIM_TS_ITR1) || \
+ ((SELECTION) == TIM_TS_ITR2) || \
+ ((SELECTION) == TIM_TS_ITR3) || \
+ ((SELECTION) == TIM_TS_NONE))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Trigger_Polarity TIM Trigger Polarity
+ * @{
+ */
+#define TIM_TRIGGERPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx trigger sources */
+#define TIM_TRIGGERPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx trigger sources */
+#define TIM_TRIGGERPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+#define TIM_TRIGGERPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+#define TIM_TRIGGERPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+
+#define IS_TIM_TRIGGERPOLARITY(POLARITY) (((POLARITY) == TIM_TRIGGERPOLARITY_INVERTED ) || \
+ ((POLARITY) == TIM_TRIGGERPOLARITY_NONINVERTED) || \
+ ((POLARITY) == TIM_TRIGGERPOLARITY_RISING ) || \
+ ((POLARITY) == TIM_TRIGGERPOLARITY_FALLING ) || \
+ ((POLARITY) == TIM_TRIGGERPOLARITY_BOTHEDGE ))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Trigger_Prescaler TIM Trigger Prescaler
+ * @{
+ */
+#define TIM_TRIGGERPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
+#define TIM_TRIGGERPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Trigger: Capture performed once every 2 events. */
+#define TIM_TRIGGERPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Trigger: Capture performed once every 4 events. */
+#define TIM_TRIGGERPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Trigger: Capture performed once every 8 events. */
+
+#define IS_TIM_TRIGGERPRESCALER(PRESCALER) (((PRESCALER) == TIM_TRIGGERPRESCALER_DIV1) || \
+ ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV2) || \
+ ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV4) || \
+ ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV8))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Trigger_Filter TIM Trigger Filter
+ * @{
+ */
+
+#define IS_TIM_TRIGGERFILTER(ICFILTER) ((ICFILTER) <= 0xF)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_TI1_Selection TIM TI1 Input Selection
+ * @{
+ */
+
+#define TIM_TI1SELECTION_CH1 ((uint32_t)0x0000)
+#define TIM_TI1SELECTION_XORCOMBINATION (TIM_CR2_TI1S)
+
+#define IS_TIM_TI1SELECTION(TI1SELECTION) (((TI1SELECTION) == TIM_TI1SELECTION_CH1) || \
+ ((TI1SELECTION) == TIM_TI1SELECTION_XORCOMBINATION))
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_Base_address TIM DMA Base address
+ * @{
+ */
+#define TIM_DMABase_CR1 (0x00000000)
+#define TIM_DMABase_CR2 (0x00000001)
+#define TIM_DMABase_SMCR (0x00000002)
+#define TIM_DMABase_DIER (0x00000003)
+#define TIM_DMABase_SR (0x00000004)
+#define TIM_DMABase_EGR (0x00000005)
+#define TIM_DMABase_CCMR1 (0x00000006)
+#define TIM_DMABase_CCMR2 (0x00000007)
+#define TIM_DMABase_CCER (0x00000008)
+#define TIM_DMABase_CNT (0x00000009)
+#define TIM_DMABase_PSC (0x0000000A)
+#define TIM_DMABase_ARR (0x0000000B)
+#define TIM_DMABase_RCR (0x0000000C)
+#define TIM_DMABase_CCR1 (0x0000000D)
+#define TIM_DMABase_CCR2 (0x0000000E)
+#define TIM_DMABase_CCR3 (0x0000000F)
+#define TIM_DMABase_CCR4 (0x00000010)
+#define TIM_DMABase_BDTR (0x00000011)
+#define TIM_DMABase_DCR (0x00000012)
+#define TIM_DMABase_OR (0x00000013)
+
+#define IS_TIM_DMA_BASE(BASE) (((BASE) == TIM_DMABase_CR1) || \
+ ((BASE) == TIM_DMABase_CR2) || \
+ ((BASE) == TIM_DMABase_SMCR) || \
+ ((BASE) == TIM_DMABase_DIER) || \
+ ((BASE) == TIM_DMABase_SR) || \
+ ((BASE) == TIM_DMABase_EGR) || \
+ ((BASE) == TIM_DMABase_CCMR1) || \
+ ((BASE) == TIM_DMABase_CCMR2) || \
+ ((BASE) == TIM_DMABase_CCER) || \
+ ((BASE) == TIM_DMABase_CNT) || \
+ ((BASE) == TIM_DMABase_PSC) || \
+ ((BASE) == TIM_DMABase_ARR) || \
+ ((BASE) == TIM_DMABase_RCR) || \
+ ((BASE) == TIM_DMABase_CCR1) || \
+ ((BASE) == TIM_DMABase_CCR2) || \
+ ((BASE) == TIM_DMABase_CCR3) || \
+ ((BASE) == TIM_DMABase_CCR4) || \
+ ((BASE) == TIM_DMABase_BDTR) || \
+ ((BASE) == TIM_DMABase_DCR) || \
+ ((BASE) == TIM_DMABase_OR))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_Burst_Length TIM DMA Burst Length
+ * @{
+ */
+
+#define TIM_DMABurstLength_1Transfer (0x00000000)
+#define TIM_DMABurstLength_2Transfers (0x00000100)
+#define TIM_DMABurstLength_3Transfers (0x00000200)
+#define TIM_DMABurstLength_4Transfers (0x00000300)
+#define TIM_DMABurstLength_5Transfers (0x00000400)
+#define TIM_DMABurstLength_6Transfers (0x00000500)
+#define TIM_DMABurstLength_7Transfers (0x00000600)
+#define TIM_DMABurstLength_8Transfers (0x00000700)
+#define TIM_DMABurstLength_9Transfers (0x00000800)
+#define TIM_DMABurstLength_10Transfers (0x00000900)
+#define TIM_DMABurstLength_11Transfers (0x00000A00)
+#define TIM_DMABurstLength_12Transfers (0x00000B00)
+#define TIM_DMABurstLength_13Transfers (0x00000C00)
+#define TIM_DMABurstLength_14Transfers (0x00000D00)
+#define TIM_DMABurstLength_15Transfers (0x00000E00)
+#define TIM_DMABurstLength_16Transfers (0x00000F00)
+#define TIM_DMABurstLength_17Transfers (0x00001000)
+#define TIM_DMABurstLength_18Transfers (0x00001100)
+
+#define IS_TIM_DMA_LENGTH(LENGTH) (((LENGTH) == TIM_DMABurstLength_1Transfer) || \
+ ((LENGTH) == TIM_DMABurstLength_2Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_3Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_4Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_5Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_6Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_7Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_8Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_9Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_10Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_11Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_12Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_13Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_14Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_15Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_16Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_17Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_18Transfers))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Filer_Value TIM Input Capture Value
+ * @{
+ */
+
+#define IS_TIM_IC_FILTER(ICFILTER) ((ICFILTER) <= 0xF)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_Handle_index TIM DMA Handle Index
+ * @{
+ */
+#define TIM_DMA_ID_UPDATE ((uint16_t) 0x0) /*!< Index of the DMA handle used for Update DMA requests */
+#define TIM_DMA_ID_CC1 ((uint16_t) 0x1) /*!< Index of the DMA handle used for Capture/Compare 1 DMA requests */
+#define TIM_DMA_ID_CC2 ((uint16_t) 0x2) /*!< Index of the DMA handle used for Capture/Compare 2 DMA requests */
+#define TIM_DMA_ID_CC3 ((uint16_t) 0x3) /*!< Index of the DMA handle used for Capture/Compare 3 DMA requests */
+#define TIM_DMA_ID_CC4 ((uint16_t) 0x4) /*!< Index of the DMA handle used for Capture/Compare 4 DMA requests */
+#define TIM_DMA_ID_COMMUTATION ((uint16_t) 0x5) /*!< Index of the DMA handle used for Commutation DMA requests */
+#define TIM_DMA_ID_TRIGGER ((uint16_t) 0x6) /*!< Index of the DMA handle used for Trigger DMA requests */
+/**
+ * @}
+ */
+
+/** @defgroup Channel_CC_State TIM Capture/Compare Channel State
+ * @{
+ */
+#define TIM_CCx_ENABLE ((uint32_t)0x0001)
+#define TIM_CCx_DISABLE ((uint32_t)0x0000)
+#define TIM_CCxN_ENABLE ((uint32_t)0x0004)
+#define TIM_CCxN_DISABLE ((uint32_t)0x0000)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup TIM_Exported_Macros TIM Exported Macros
+ * @{
+ */
+
+/** @brief Reset TIM handle state
+ * @param __HANDLE__: TIM handle.
+ * @retval None
+ */
+#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_TIM_STATE_RESET)
+
+/**
+ * @brief Enable the TIM peripheral.
+ * @param __HANDLE__: TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|=(TIM_CR1_CEN))
+
+/**
+ * @brief Enable the TIM main Output.
+ * @param __HANDLE__: TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_MOE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->BDTR|=(TIM_BDTR_MOE))
+
+/**
+ * @brief Disable the TIM peripheral.
+ * @param __HANDLE__: TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_DISABLE(__HANDLE__) \
+ do { \
+ if (((__HANDLE__)->Instance->CCER & CCER_CCxE_MASK) == 0) \
+ { \
+ if(((__HANDLE__)->Instance->CCER & CCER_CCxNE_MASK) == 0) \
+ { \
+ (__HANDLE__)->Instance->CR1 &= ~(TIM_CR1_CEN); \
+ } \
+ } \
+ } while(0)
+/* The Main Output Enable of a timer instance is disabled only if all the CCx and CCxN
+ channels have been disabled */
+/**
+ * @brief Disable the TIM main Output.
+ * @param __HANDLE__: TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_MOE_DISABLE(__HANDLE__) \
+ do { \
+ if (((__HANDLE__)->Instance->CCER & CCER_CCxE_MASK) == 0) \
+ { \
+ if(((__HANDLE__)->Instance->CCER & CCER_CCxNE_MASK) == 0) \
+ { \
+ (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE); \
+ } \
+ } \
+ } while(0)
+
+#define __HAL_TIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER |= (__INTERRUPT__))
+#define __HAL_TIM_ENABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER |= (__DMA__))
+#define __HAL_TIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER &= ~(__INTERRUPT__))
+#define __HAL_TIM_DISABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER &= ~(__DMA__))
+#define __HAL_TIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__))
+#define __HAL_TIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
+
+#define __HAL_TIM_GET_ITSTATUS(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->DIER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+#define __HAL_TIM_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__))
+
+#define __HAL_TIM_DIRECTION_STATUS(__HANDLE__) (((__HANDLE__)->Instance->CR1 & (TIM_CR1_DIR)) == (TIM_CR1_DIR))
+#define __HAL_TIM_PRESCALER (__HANDLE__, __PRESC__) ((__HANDLE__)->Instance->PSC = (__PRESC__))
+
+#define __HAL_TIM_SetICPrescalerValue(__HANDLE__, __CHANNEL__, __ICPSC__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= (__ICPSC__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= ((__ICPSC__) << 8)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= (__ICPSC__)) :\
+ ((__HANDLE__)->Instance->CCMR2 |= ((__ICPSC__) << 8)))
+
+#define __HAL_TIM_ResetICPrescalerValue(__HANDLE__, __CHANNEL__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC) :\
+ ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC))
+
+/**
+ * @brief Sets the TIM Capture Compare Register value on runtime without
+ * calling another time ConfigChannel function.
+ * @param __HANDLE__: TIM handle.
+ * @param __CHANNEL__ : TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param __COMPARE__: specifies the Capture Compare register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SetCompare(__HANDLE__, __CHANNEL__, __COMPARE__) \
+(*(__IO uint32_t *)(&((__HANDLE__)->Instance->CCR1) + ((__CHANNEL__) >> 2)) = (__COMPARE__))
+
+/**
+ * @brief Gets the TIM Capture Compare Register value on runtime
+ * @param __HANDLE__: TIM handle.
+ * @param __CHANNEL__ : TIM Channel associated with the capture compare register
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: get capture/compare 1 register value
+ * @arg TIM_CHANNEL_2: get capture/compare 2 register value
+ * @arg TIM_CHANNEL_3: get capture/compare 3 register value
+ * @arg TIM_CHANNEL_4: get capture/compare 4 register value
+ * @retval None
+ */
+#define __HAL_TIM_GetCompare(__HANDLE__, __CHANNEL__) \
+ (*(__IO uint32_t *)(&((__HANDLE__)->Instance->CCR1) + ((__CHANNEL__) >> 2)))
+
+/**
+ * @brief Sets the TIM Counter Register value on runtime.
+ * @param __HANDLE__: TIM handle.
+ * @param __COUNTER__: specifies the Counter register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SetCounter(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->CNT = (__COUNTER__))
+
+/**
+ * @brief Gets the TIM Counter Register value on runtime.
+ * @param __HANDLE__: TIM handle.
+ * @retval None
+ */
+#define __HAL_TIM_GetCounter(__HANDLE__) \
+ ((__HANDLE__)->Instance->CNT)
+
+/**
+ * @brief Sets the TIM Autoreload Register value on runtime without calling
+ * another time any Init function.
+ * @param __HANDLE__: TIM handle.
+ * @param __AUTORELOAD__: specifies the Counter register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SetAutoreload(__HANDLE__, __AUTORELOAD__) \
+ do{ \
+ (__HANDLE__)->Instance->ARR = (__AUTORELOAD__); \
+ (__HANDLE__)->Init.Period = (__AUTORELOAD__); \
+ } while(0)
+
+/**
+ * @brief Gets the TIM Autoreload Register value on runtime
+ * @param __HANDLE__: TIM handle.
+ * @retval None
+ */
+#define __HAL_TIM_GetAutoreload(__HANDLE__) \
+ ((__HANDLE__)->Instance->ARR)
+
+/**
+ * @brief Sets the TIM Clock Division value on runtime without calling
+ * another time any Init function.
+ * @param __HANDLE__: TIM handle.
+ * @param __CKD__: specifies the clock division value.
+ * This parameter can be one of the following value:
+ * @arg TIM_CLOCKDIVISION_DIV1
+ * @arg TIM_CLOCKDIVISION_DIV2
+ * @arg TIM_CLOCKDIVISION_DIV4
+ * @retval None
+ */
+#define __HAL_TIM_SetClockDivision(__HANDLE__, __CKD__) \
+ do{ \
+ (__HANDLE__)->Instance->CR1 &= ~TIM_CR1_CKD; \
+ (__HANDLE__)->Instance->CR1 |= (__CKD__); \
+ (__HANDLE__)->Init.ClockDivision = (__CKD__); \
+ } while(0)
+
+/**
+ * @brief Gets the TIM Clock Division value on runtime
+ * @param __HANDLE__: TIM handle.
+ * @retval None
+ */
+#define __HAL_TIM_GetClockDivision(__HANDLE__) \
+ ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD)
+
+/**
+ * @brief Sets the TIM Input Capture prescaler on runtime without calling
+ * another time HAL_TIM_IC_ConfigChannel() function.
+ * @param __HANDLE__: TIM handle.
+ * @param __CHANNEL__ : TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param __ICPSC__: specifies the Input Capture4 prescaler new value.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPSC_DIV1: no prescaler
+ * @arg TIM_ICPSC_DIV2: capture is done once every 2 events
+ * @arg TIM_ICPSC_DIV4: capture is done once every 4 events
+ * @arg TIM_ICPSC_DIV8: capture is done once every 8 events
+ * @retval None
+ */
+#define __HAL_TIM_SetICPrescaler(__HANDLE__, __CHANNEL__, __ICPSC__) \
+ do{ \
+ __HAL_TIM_ResetICPrescalerValue((__HANDLE__), (__CHANNEL__)); \
+ __HAL_TIM_SetICPrescalerValue((__HANDLE__), (__CHANNEL__), (__ICPSC__)); \
+ } while(0)
+
+/**
+ * @brief Gets the TIM Input Capture prescaler on runtime
+ * @param __HANDLE__: TIM handle.
+ * @param __CHANNEL__: TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: get input capture 1 prescaler value
+ * @arg TIM_CHANNEL_2: get input capture 2 prescaler value
+ * @arg TIM_CHANNEL_3: get input capture 3 prescaler value
+ * @arg TIM_CHANNEL_4: get input capture 4 prescaler value
+ * @retval None
+ */
+#define __HAL_TIM_GetICPrescaler(__HANDLE__, __CHANNEL__) \
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC1PSC) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? (((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC2PSC) >> 8) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC3PSC) :\
+ (((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC4PSC)) >> 8)
+
+/**
+ * @brief Set the Update Request Source (URS) bit of the TIMx_CR1 register
+ * @param __HANDLE__: TIM handle.
+ * @note When the USR bit of the TIMx_CR1 register is set, only counter
+ * overflow/underflow generates an update interrupt or DMA request (if
+ * enabled)
+ * @retval None
+ */
+#define __HAL_TIM_URS_ENABLE(__HANDLE__) \
+ ((__HANDLE__)->Instance->CR1|= (TIM_CR1_URS))
+
+/**
+ * @brief Reset the Update Request Source (URS) bit of the TIMx_CR1 register
+ * @param __HANDLE__: TIM handle.
+ * @note When the USR bit of the TIMx_CR1 register is reset, any of the
+ * following events generate an update interrupt or DMA request (if
+ * enabled):
+ * (+) Counter overflow/underflow
+ * (+) Setting the UG bit
+ * (+) Update generation through the slave mode controller
+ * @retval None
+ */
+#define __HAL_TIM_URS_DISABLE(__HANDLE__) \
+ ((__HANDLE__)->Instance->CR1&=~(TIM_CR1_URS))
+
+/**
+ * @}
+ */
+
+/* Include TIM HAL Extension module */
+#include "stm32f0xx_hal_tim_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup TIM_Exported_Functions TIM Exported Functions
+ * @{
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group1 Time Base functions
+ * @brief Time Base functions
+ * @{
+ */
+/* Time Base functions ********************************************************/
+HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group2 Time Output Compare functions
+ * @brief Time Output Compare functions
+ * @{
+ */
+/* Timer Output Compare functions **********************************************/
+HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group3 Time PWM functions
+ * @brief Time PWM functions
+ * @{
+ */
+/* Timer PWM functions *********************************************************/
+HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group4 Time Input Capture functions
+ * @brief Time Input Capture functions
+ * @{
+ */
+/* Timer Input Capture functions ***********************************************/
+HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group5 Time One Pulse functions
+ * @brief Time One Pulse functions
+ * @{
+ */
+/* Timer One Pulse functions ***************************************************/
+HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode);
+HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group6 Time Encoder functions
+ * @brief Time Encoder functions
+ * @{
+ */
+/* Timer Encoder functions *****************************************************/
+HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef* sConfig);
+HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim);
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, uint32_t *pData2, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group7 TIM IRQ handler management
+ * @brief IRQ handler management
+ * @{
+ */
+/* Interrupt Handler functions **********************************************/
+void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group8 Peripheral Control functions
+ * @brief Peripheral Control functions
+ * @{
+ */
+/* Control functions *********************************************************/
+HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef* sConfig, uint32_t OutputChannel, uint32_t InputChannel);
+HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef * sClearInputConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef * sClockSourceConfig);
+HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection);
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig);
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization_IT(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig);
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \
+ uint32_t *BurstBuffer, uint32_t BurstLength);
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \
+ uint32_t *BurstBuffer, uint32_t BurstLength);
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
+HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource);
+uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group9
+ * @brief TIM Callbacks functions
+ * @{
+ */
+/* Callback in non blocking modes (Interrupt and DMA) *************************/
+void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group10
+ * @brief Peripheral State functions
+ * @{
+ */
+/* Peripheral State functions **************************************************/
+HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private Macros -----------------------------------------------------------*/
+/** @defgroup TIM_Private_Macros TIM Private Macros
+ * @{
+ */
+/* The counter of a timer instance is disabled only if all the CCx and CCxN
+ channels have been disabled */
+#define CCER_CCxE_MASK ((uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E | TIM_CCER_CC3E | TIM_CCER_CC4E))
+#define CCER_CCxNE_MASK ((uint32_t)(TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE))
+/**
+ * @}
+ */
+
+/* Private Functions --------------------------------------------------------*/
+/** @addtogroup TIM_Private_Functions
+ * @{
+ */
+void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure);
+void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter);
+void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+void HAL_TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma);
+void HAL_TIM_DMAError(DMA_HandleTypeDef *hdma);
+void HAL_TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma);
+void TIM_CCxChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelState);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_TIM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/include/stm32f0xx_hal_tim_ex.h b/f0/include/stm32f0xx_hal_tim_ex.h
new file mode 100755
index 0000000000000000000000000000000000000000..da7cb355bd4eed687693c247e8c2f2b448933dce
--- /dev/null
+++ b/f0/include/stm32f0xx_hal_tim_ex.h
@@ -0,0 +1,293 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_tim_ex.h
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief Header file of TIM HAL Extended module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_TIM_EX_H
+#define __STM32F0xx_HAL_TIM_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup TIMEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Types TIMEx Extended Exported Types
+ * @{
+ */
+
+/**
+ * @brief TIM Hall sensor Configuration Structure definition
+ */
+
+typedef struct
+{
+
+ uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t IC1Filter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+ uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+} TIM_HallSensor_InitTypeDef;
+
+/**
+ * @brief TIM Master configuration Structure definition
+ */
+typedef struct {
+ uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection
+ This parameter can be a value of @ref TIM_Master_Mode_Selection */
+ uint32_t MasterSlaveMode; /*!< Master/slave mode selection
+ This parameter can be a value of @ref TIM_Master_Slave_Mode */
+}TIM_MasterConfigTypeDef;
+
+/**
+ * @brief TIM Break and Dead time configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t OffStateRunMode; /*!< TIM off state in run mode
+ This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */
+ uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode
+ This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */
+ uint32_t LockLevel; /*!< TIM Lock level
+ This parameter can be a value of @ref TIM_Lock_level */
+ uint32_t DeadTime; /*!< TIM dead Time
+ This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */
+ uint32_t BreakState; /*!< TIM Break State
+ This parameter can be a value of @ref TIM_Break_Input_enable_disable */
+ uint32_t BreakPolarity; /*!< TIM Break input polarity
+ This parameter can be a value of @ref TIM_Break_Polarity */
+ uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state
+ This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */
+} TIM_BreakDeadTimeConfigTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Constants TIMEx Exported Constants
+ * @{
+ */
+
+/** @defgroup TIMEx_Remap TIMEx Remap
+ * @{
+ */
+
+#define TIM_TIM14_GPIO (0x00000000) /*!< TIM14 TI1 is connected to GPIO */
+#define TIM_TIM14_RTC (0x00000001) /*!< TIM14 TI1 is connected to RTC_clock */
+#define TIM_TIM14_HSE (0x00000002) /*!< TIM14 TI1 is connected to HSE/32 */
+#define TIM_TIM14_MCO (0x00000003) /*!< TIM14 TI1 is connected to MCO */
+
+#define IS_TIM_REMAP(TIM_REMAP) (((TIM_REMAP) == TIM_TIM14_GPIO) ||\
+ ((TIM_REMAP) == TIM_TIM14_RTC) ||\
+ ((TIM_REMAP) == TIM_TIM14_HSE) ||\
+ ((TIM_REMAP) == TIM_TIM14_MCO))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Clock_Filter TIM Clock Filter
+ * @{
+ */
+#define IS_TIM_DEADTIME(DEADTIME) ((DEADTIME) <= 0xFF)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup TIMEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group1 Timer Hall Sensor functions
+ * @brief Timer Hall Sensor functions
+ * @{
+ */
+/* Timer Hall Sensor functions **********************************************/
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef* sConfig);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim);
+
+void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim);
+
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group2 Timer Complementary Output Compare functions
+ * @brief Timer Complementary Output Compare functions
+ * @{
+ */
+/* Timer Complementary Output Compare functions *****************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group3 Timer Complementary PWM functions
+ * @brief Timer Complementary PWM functions
+ * @{
+ */
+/* Timer Complementary PWM functions ****************************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group4 Timer Complementary One Pulse functions
+ * @brief Timer Complementary One Pulse functions
+ * @{
+ */
+/* Timer Complementary One Pulse functions **********************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group5 Peripheral Control functions
+ * @brief Peripheral Control functions
+ * @{
+ */
+/* Extended Control functions ************************************************/
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, TIM_MasterConfigTypeDef * sMasterConfig);
+HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig);
+HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group6 Extension Callbacks functions
+ * @brief Extended Callbacks functions
+ * @{
+ */
+/* Extension Callback *********************************************************/
+void HAL_TIMEx_CommutationCallback(TIM_HandleTypeDef *htim);
+void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim);
+void HAL_TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group7 Extension Peripheral State functions
+ * @brief Extended Peripheral State functions
+ * @{
+ */
+/* Extension Peripheral State functions **************************************/
+HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F0xx_HAL_TIM_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/include/stm32f0xx_hal_tsc.h b/f0/include/stm32f0xx_hal_tsc.h
new file mode 100755
index 0000000000000000000000000000000000000000..882c91544b9811939c66805f9cc3ac67eed6ef9a
--- /dev/null
+++ b/f0/include/stm32f0xx_hal_tsc.h
@@ -0,0 +1,724 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_tsc.h
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief This file contains all the functions prototypes for the TSC firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_TSC_H
+#define __STM32F0xx_TSC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F051x8) || defined(STM32F071xB) || defined(STM32F091xC) || \
+ defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || \
+ defined(STM32F058xx) || defined(STM32F078xx) || defined(STM32F098xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup TSC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup TSC_Exported_Types TSC Exported Types
+ * @{
+ */
+/**
+ * @brief TSC state structure definition
+ */
+typedef enum
+{
+ HAL_TSC_STATE_RESET = 0x00, /*!< TSC registers have their reset value */
+ HAL_TSC_STATE_READY = 0x01, /*!< TSC registers are initialized or acquisition is completed with success */
+ HAL_TSC_STATE_BUSY = 0x02, /*!< TSC initialization or acquisition is on-going */
+ HAL_TSC_STATE_ERROR = 0x03 /*!< Acquisition is completed with max count error */
+} HAL_TSC_StateTypeDef;
+
+/**
+ * @brief TSC group status structure definition
+ */
+typedef enum
+{
+ TSC_GROUP_ONGOING = 0x00, /*!< Acquisition on group is on-going or not started */
+ TSC_GROUP_COMPLETED = 0x01 /*!< Acquisition on group is completed with success (no max count error) */
+} TSC_GroupStatusTypeDef;
+
+/**
+ * @brief TSC init structure definition
+ */
+typedef struct
+{
+ uint32_t CTPulseHighLength; /*!< Charge-transfer high pulse length */
+ uint32_t CTPulseLowLength; /*!< Charge-transfer low pulse length */
+ uint32_t SpreadSpectrum; /*!< Spread spectrum activation */
+ uint32_t SpreadSpectrumDeviation; /*!< Spread spectrum deviation */
+ uint32_t SpreadSpectrumPrescaler; /*!< Spread spectrum prescaler */
+ uint32_t PulseGeneratorPrescaler; /*!< Pulse generator prescaler */
+ uint32_t MaxCountValue; /*!< Max count value */
+ uint32_t IODefaultMode; /*!< IO default mode */
+ uint32_t SynchroPinPolarity; /*!< Synchro pin polarity */
+ uint32_t AcquisitionMode; /*!< Acquisition mode */
+ uint32_t MaxCountInterrupt; /*!< Max count interrupt activation */
+ uint32_t ChannelIOs; /*!< Channel IOs mask */
+ uint32_t ShieldIOs; /*!< Shield IOs mask */
+ uint32_t SamplingIOs; /*!< Sampling IOs mask */
+} TSC_InitTypeDef;
+
+/**
+ * @brief TSC IOs configuration structure definition
+ */
+typedef struct
+{
+ uint32_t ChannelIOs; /*!< Channel IOs mask */
+ uint32_t ShieldIOs; /*!< Shield IOs mask */
+ uint32_t SamplingIOs; /*!< Sampling IOs mask */
+} TSC_IOConfigTypeDef;
+
+/**
+ * @brief TSC handle Structure definition
+ */
+typedef struct
+{
+ TSC_TypeDef *Instance; /*!< Register base address */
+ TSC_InitTypeDef Init; /*!< Initialization parameters */
+ __IO HAL_TSC_StateTypeDef State; /*!< Peripheral state */
+ HAL_LockTypeDef Lock; /*!< Lock feature */
+} TSC_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup TSC_Exported_Constants TSC Exported Constants
+ * @{
+ */
+
+/** @defgroup TSC_CTPH_Cycles TSC Charge Transfer Pulse High
+ * @{
+ */
+#define TSC_CTPH_1CYCLE ((uint32_t)((uint32_t) 0 << 28))
+#define TSC_CTPH_2CYCLES ((uint32_t)((uint32_t) 1 << 28))
+#define TSC_CTPH_3CYCLES ((uint32_t)((uint32_t) 2 << 28))
+#define TSC_CTPH_4CYCLES ((uint32_t)((uint32_t) 3 << 28))
+#define TSC_CTPH_5CYCLES ((uint32_t)((uint32_t) 4 << 28))
+#define TSC_CTPH_6CYCLES ((uint32_t)((uint32_t) 5 << 28))
+#define TSC_CTPH_7CYCLES ((uint32_t)((uint32_t) 6 << 28))
+#define TSC_CTPH_8CYCLES ((uint32_t)((uint32_t) 7 << 28))
+#define TSC_CTPH_9CYCLES ((uint32_t)((uint32_t) 8 << 28))
+#define TSC_CTPH_10CYCLES ((uint32_t)((uint32_t) 9 << 28))
+#define TSC_CTPH_11CYCLES ((uint32_t)((uint32_t)10 << 28))
+#define TSC_CTPH_12CYCLES ((uint32_t)((uint32_t)11 << 28))
+#define TSC_CTPH_13CYCLES ((uint32_t)((uint32_t)12 << 28))
+#define TSC_CTPH_14CYCLES ((uint32_t)((uint32_t)13 << 28))
+#define TSC_CTPH_15CYCLES ((uint32_t)((uint32_t)14 << 28))
+#define TSC_CTPH_16CYCLES ((uint32_t)((uint32_t)15 << 28))
+#define IS_TSC_CTPH(VAL) (((VAL) == TSC_CTPH_1CYCLE) || \
+ ((VAL) == TSC_CTPH_2CYCLES) || \
+ ((VAL) == TSC_CTPH_3CYCLES) || \
+ ((VAL) == TSC_CTPH_4CYCLES) || \
+ ((VAL) == TSC_CTPH_5CYCLES) || \
+ ((VAL) == TSC_CTPH_6CYCLES) || \
+ ((VAL) == TSC_CTPH_7CYCLES) || \
+ ((VAL) == TSC_CTPH_8CYCLES) || \
+ ((VAL) == TSC_CTPH_9CYCLES) || \
+ ((VAL) == TSC_CTPH_10CYCLES) || \
+ ((VAL) == TSC_CTPH_11CYCLES) || \
+ ((VAL) == TSC_CTPH_12CYCLES) || \
+ ((VAL) == TSC_CTPH_13CYCLES) || \
+ ((VAL) == TSC_CTPH_14CYCLES) || \
+ ((VAL) == TSC_CTPH_15CYCLES) || \
+ ((VAL) == TSC_CTPH_16CYCLES))
+/**
+ * @}
+ */
+
+/** @defgroup TSC_CTPL_Cycles TSC Charge Transfer Pulse Low
+ * @{
+ */
+#define TSC_CTPL_1CYCLE ((uint32_t)((uint32_t) 0 << 24))
+#define TSC_CTPL_2CYCLES ((uint32_t)((uint32_t) 1 << 24))
+#define TSC_CTPL_3CYCLES ((uint32_t)((uint32_t) 2 << 24))
+#define TSC_CTPL_4CYCLES ((uint32_t)((uint32_t) 3 << 24))
+#define TSC_CTPL_5CYCLES ((uint32_t)((uint32_t) 4 << 24))
+#define TSC_CTPL_6CYCLES ((uint32_t)((uint32_t) 5 << 24))
+#define TSC_CTPL_7CYCLES ((uint32_t)((uint32_t) 6 << 24))
+#define TSC_CTPL_8CYCLES ((uint32_t)((uint32_t) 7 << 24))
+#define TSC_CTPL_9CYCLES ((uint32_t)((uint32_t) 8 << 24))
+#define TSC_CTPL_10CYCLES ((uint32_t)((uint32_t) 9 << 24))
+#define TSC_CTPL_11CYCLES ((uint32_t)((uint32_t)10 << 24))
+#define TSC_CTPL_12CYCLES ((uint32_t)((uint32_t)11 << 24))
+#define TSC_CTPL_13CYCLES ((uint32_t)((uint32_t)12 << 24))
+#define TSC_CTPL_14CYCLES ((uint32_t)((uint32_t)13 << 24))
+#define TSC_CTPL_15CYCLES ((uint32_t)((uint32_t)14 << 24))
+#define TSC_CTPL_16CYCLES ((uint32_t)((uint32_t)15 << 24))
+#define IS_TSC_CTPL(VAL) (((VAL) == TSC_CTPL_1CYCLE) || \
+ ((VAL) == TSC_CTPL_2CYCLES) || \
+ ((VAL) == TSC_CTPL_3CYCLES) || \
+ ((VAL) == TSC_CTPL_4CYCLES) || \
+ ((VAL) == TSC_CTPL_5CYCLES) || \
+ ((VAL) == TSC_CTPL_6CYCLES) || \
+ ((VAL) == TSC_CTPL_7CYCLES) || \
+ ((VAL) == TSC_CTPL_8CYCLES) || \
+ ((VAL) == TSC_CTPL_9CYCLES) || \
+ ((VAL) == TSC_CTPL_10CYCLES) || \
+ ((VAL) == TSC_CTPL_11CYCLES) || \
+ ((VAL) == TSC_CTPL_12CYCLES) || \
+ ((VAL) == TSC_CTPL_13CYCLES) || \
+ ((VAL) == TSC_CTPL_14CYCLES) || \
+ ((VAL) == TSC_CTPL_15CYCLES) || \
+ ((VAL) == TSC_CTPL_16CYCLES))
+/**
+ * @}
+ */
+
+/** @defgroup TSC_SS_Prescaler_definition TSC Spread spectrum prescaler definition
+ * @{
+ */
+#define TSC_SS_PRESC_DIV1 ((uint32_t)0)
+#define TSC_SS_PRESC_DIV2 (TSC_CR_SSPSC)
+#define IS_TSC_SS_PRESC(VAL) (((VAL) == TSC_SS_PRESC_DIV1) || ((VAL) == TSC_SS_PRESC_DIV2))
+
+/**
+ * @}
+ */
+
+/** @defgroup TSC_PG_Prescaler_definition TSC Pulse Generator prescaler definition
+ * @{
+ */
+#define TSC_PG_PRESC_DIV1 ((uint32_t)(0 << 12))
+#define TSC_PG_PRESC_DIV2 ((uint32_t)(1 << 12))
+#define TSC_PG_PRESC_DIV4 ((uint32_t)(2 << 12))
+#define TSC_PG_PRESC_DIV8 ((uint32_t)(3 << 12))
+#define TSC_PG_PRESC_DIV16 ((uint32_t)(4 << 12))
+#define TSC_PG_PRESC_DIV32 ((uint32_t)(5 << 12))
+#define TSC_PG_PRESC_DIV64 ((uint32_t)(6 << 12))
+#define TSC_PG_PRESC_DIV128 ((uint32_t)(7 << 12))
+#define IS_TSC_PG_PRESC(VAL) (((VAL) == TSC_PG_PRESC_DIV1) || \
+ ((VAL) == TSC_PG_PRESC_DIV2) || \
+ ((VAL) == TSC_PG_PRESC_DIV4) || \
+ ((VAL) == TSC_PG_PRESC_DIV8) || \
+ ((VAL) == TSC_PG_PRESC_DIV16) || \
+ ((VAL) == TSC_PG_PRESC_DIV32) || \
+ ((VAL) == TSC_PG_PRESC_DIV64) || \
+ ((VAL) == TSC_PG_PRESC_DIV128))
+/**
+ * @}
+ */
+
+/** @defgroup TSC_MCV_definition TSC Max Count Value definition
+ * @{
+ */
+#define TSC_MCV_255 ((uint32_t)(0 << 5))
+#define TSC_MCV_511 ((uint32_t)(1 << 5))
+#define TSC_MCV_1023 ((uint32_t)(2 << 5))
+#define TSC_MCV_2047 ((uint32_t)(3 << 5))
+#define TSC_MCV_4095 ((uint32_t)(4 << 5))
+#define TSC_MCV_8191 ((uint32_t)(5 << 5))
+#define TSC_MCV_16383 ((uint32_t)(6 << 5))
+#define IS_TSC_MCV(VAL) (((VAL) == TSC_MCV_255) || \
+ ((VAL) == TSC_MCV_511) || \
+ ((VAL) == TSC_MCV_1023) || \
+ ((VAL) == TSC_MCV_2047) || \
+ ((VAL) == TSC_MCV_4095) || \
+ ((VAL) == TSC_MCV_8191) || \
+ ((VAL) == TSC_MCV_16383))
+/**
+ * @}
+ */
+
+/** @defgroup TSC_IO_default_mode_definition TSC I/O default mode definition
+ * @{
+ */
+#define TSC_IODEF_OUT_PP_LOW ((uint32_t)0)
+#define TSC_IODEF_IN_FLOAT (TSC_CR_IODEF)
+#define IS_TSC_IODEF(VAL) (((VAL) == TSC_IODEF_OUT_PP_LOW) || ((VAL) == TSC_IODEF_IN_FLOAT))
+/**
+ * @}
+ */
+
+/** @defgroup TSC_Synchronization_pin_polarity TSC Synchronization pin polarity
+ * @{
+ */
+#define TSC_SYNC_POL_FALL ((uint32_t)0)
+#define TSC_SYNC_POL_RISE_HIGH (TSC_CR_SYNCPOL)
+#define IS_TSC_SYNC_POL(VAL) (((VAL) == TSC_SYNC_POL_FALL) || ((VAL) == TSC_SYNC_POL_RISE_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup TSC_Acquisition_mode TSC Acquisition mode
+ * @{
+ */
+#define TSC_ACQ_MODE_NORMAL ((uint32_t)0)
+#define TSC_ACQ_MODE_SYNCHRO (TSC_CR_AM)
+#define IS_TSC_ACQ_MODE(VAL) (((VAL) == TSC_ACQ_MODE_NORMAL) || ((VAL) == TSC_ACQ_MODE_SYNCHRO))
+/**
+ * @}
+ */
+
+/** @defgroup TSC_IO_mode_definition TSC I/O mode definition
+ * @{
+ */
+#define TSC_IOMODE_UNUSED ((uint32_t)0)
+#define TSC_IOMODE_CHANNEL ((uint32_t)1)
+#define TSC_IOMODE_SHIELD ((uint32_t)2)
+#define TSC_IOMODE_SAMPLING ((uint32_t)3)
+#define IS_TSC_IOMODE(VAL) (((VAL) == TSC_IOMODE_UNUSED) || \
+ ((VAL) == TSC_IOMODE_CHANNEL) || \
+ ((VAL) == TSC_IOMODE_SHIELD) || \
+ ((VAL) == TSC_IOMODE_SAMPLING))
+/**
+ * @}
+ */
+
+/** @defgroup TSC_interrupts_definition TSC interrupts definition
+ * @{
+ */
+#define TSC_IT_EOA ((uint32_t)TSC_IER_EOAIE)
+#define TSC_IT_MCE ((uint32_t)TSC_IER_MCEIE)
+#define IS_TSC_MCE_IT(VAL) (((VAL) == DISABLE) || ((VAL) == ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup TSC_flags_definition TSC Flags Definition
+ * @{
+ */
+#define TSC_FLAG_EOA ((uint32_t)TSC_ISR_EOAF)
+#define TSC_FLAG_MCE ((uint32_t)TSC_ISR_MCEF)
+/**
+ * @}
+ */
+
+/** @defgroup TSC_groups_definition TSC groups definition
+ * @{
+ */
+#define TSC_NB_OF_GROUPS (8)
+
+#define TSC_GROUP1 ((uint32_t)0x00000001)
+#define TSC_GROUP2 ((uint32_t)0x00000002)
+#define TSC_GROUP3 ((uint32_t)0x00000004)
+#define TSC_GROUP4 ((uint32_t)0x00000008)
+#define TSC_GROUP5 ((uint32_t)0x00000010)
+#define TSC_GROUP6 ((uint32_t)0x00000020)
+#define TSC_GROUP7 ((uint32_t)0x00000040)
+#define TSC_GROUP8 ((uint32_t)0x00000080)
+#define TSC_ALL_GROUPS ((uint32_t)0x000000FF)
+
+#define TSC_GROUP1_IDX ((uint32_t)0)
+#define TSC_GROUP2_IDX ((uint32_t)1)
+#define TSC_GROUP3_IDX ((uint32_t)2)
+#define TSC_GROUP4_IDX ((uint32_t)3)
+#define TSC_GROUP5_IDX ((uint32_t)4)
+#define TSC_GROUP6_IDX ((uint32_t)5)
+#define TSC_GROUP7_IDX ((uint32_t)6)
+#define TSC_GROUP8_IDX ((uint32_t)7)
+#define IS_GROUP_INDEX(VAL) (((VAL) == 0) || (((VAL) > 0) && ((VAL) < TSC_NB_OF_GROUPS)))
+
+#define TSC_GROUP1_IO1 ((uint32_t)0x00000001)
+#define TSC_GROUP1_IO2 ((uint32_t)0x00000002)
+#define TSC_GROUP1_IO3 ((uint32_t)0x00000004)
+#define TSC_GROUP1_IO4 ((uint32_t)0x00000008)
+#define TSC_GROUP1_ALL_IOS ((uint32_t)0x0000000F)
+
+#define TSC_GROUP2_IO1 ((uint32_t)0x00000010)
+#define TSC_GROUP2_IO2 ((uint32_t)0x00000020)
+#define TSC_GROUP2_IO3 ((uint32_t)0x00000040)
+#define TSC_GROUP2_IO4 ((uint32_t)0x00000080)
+#define TSC_GROUP2_ALL_IOS ((uint32_t)0x000000F0)
+
+#define TSC_GROUP3_IO1 ((uint32_t)0x00000100)
+#define TSC_GROUP3_IO2 ((uint32_t)0x00000200)
+#define TSC_GROUP3_IO3 ((uint32_t)0x00000400)
+#define TSC_GROUP3_IO4 ((uint32_t)0x00000800)
+#define TSC_GROUP3_ALL_IOS ((uint32_t)0x00000F00)
+
+#define TSC_GROUP4_IO1 ((uint32_t)0x00001000)
+#define TSC_GROUP4_IO2 ((uint32_t)0x00002000)
+#define TSC_GROUP4_IO3 ((uint32_t)0x00004000)
+#define TSC_GROUP4_IO4 ((uint32_t)0x00008000)
+#define TSC_GROUP4_ALL_IOS ((uint32_t)0x0000F000)
+
+#define TSC_GROUP5_IO1 ((uint32_t)0x00010000)
+#define TSC_GROUP5_IO2 ((uint32_t)0x00020000)
+#define TSC_GROUP5_IO3 ((uint32_t)0x00040000)
+#define TSC_GROUP5_IO4 ((uint32_t)0x00080000)
+#define TSC_GROUP5_ALL_IOS ((uint32_t)0x000F0000)
+
+#define TSC_GROUP6_IO1 ((uint32_t)0x00100000)
+#define TSC_GROUP6_IO2 ((uint32_t)0x00200000)
+#define TSC_GROUP6_IO3 ((uint32_t)0x00400000)
+#define TSC_GROUP6_IO4 ((uint32_t)0x00800000)
+#define TSC_GROUP6_ALL_IOS ((uint32_t)0x00F00000)
+
+#define TSC_GROUP7_IO1 ((uint32_t)0x01000000)
+#define TSC_GROUP7_IO2 ((uint32_t)0x02000000)
+#define TSC_GROUP7_IO3 ((uint32_t)0x04000000)
+#define TSC_GROUP7_IO4 ((uint32_t)0x08000000)
+#define TSC_GROUP7_ALL_IOS ((uint32_t)0x0F000000)
+
+#define TSC_GROUP8_IO1 ((uint32_t)0x10000000)
+#define TSC_GROUP8_IO2 ((uint32_t)0x20000000)
+#define TSC_GROUP8_IO3 ((uint32_t)0x40000000)
+#define TSC_GROUP8_IO4 ((uint32_t)0x80000000)
+#define TSC_GROUP8_ALL_IOS ((uint32_t)0xF0000000)
+
+#define TSC_ALL_GROUPS_ALL_IOS ((uint32_t)0xFFFFFFFF)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros -----------------------------------------------------------*/
+/** @defgroup TSC_Private_Macros TSC Private Macros
+ * @{
+ */
+/** @defgroup TSC_Spread_Spectrum TSC Spread Spectrum
+ * @{
+ */
+#define IS_TSC_SS(VAL) (((VAL) == DISABLE) || ((VAL) == ENABLE))
+
+#define IS_TSC_SSD(VAL) (((VAL) == 0) || (((VAL) > 0) && ((VAL) < 128)))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup TSC_Exported_Macros TSC Exported Macros
+ * @{
+ */
+
+/** @brief Reset TSC handle state
+ * @param __HANDLE__: TSC handle.
+ * @retval None
+ */
+#define __HAL_TSC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_TSC_STATE_RESET)
+
+/**
+ * @brief Enable the TSC peripheral.
+ * @param __HANDLE__: TSC handle
+ * @retval None
+ */
+#define __HAL_TSC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= TSC_CR_TSCE)
+
+/**
+ * @brief Disable the TSC peripheral.
+ * @param __HANDLE__: TSC handle
+ * @retval None
+ */
+#define __HAL_TSC_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= (uint32_t)(~TSC_CR_TSCE))
+
+/**
+ * @brief Start acquisition
+ * @param __HANDLE__: TSC handle
+ * @retval None
+ */
+#define __HAL_TSC_START_ACQ(__HANDLE__) ((__HANDLE__)->Instance->CR |= TSC_CR_START)
+
+/**
+ * @brief Stop acquisition
+ * @param __HANDLE__: TSC handle
+ * @retval None
+ */
+#define __HAL_TSC_STOP_ACQ(__HANDLE__) ((__HANDLE__)->Instance->CR &= (uint32_t)(~TSC_CR_START))
+
+/**
+ * @brief Set IO default mode to output push-pull low
+ * @param __HANDLE__: TSC handle
+ * @retval None
+ */
+#define __HAL_TSC_SET_IODEF_OUTPPLOW(__HANDLE__) ((__HANDLE__)->Instance->CR &= (uint32_t)(~TSC_CR_IODEF))
+
+/**
+ * @brief Set IO default mode to input floating
+ * @param __HANDLE__: TSC handle
+ * @retval None
+ */
+#define __HAL_TSC_SET_IODEF_INFLOAT(__HANDLE__) ((__HANDLE__)->Instance->CR |= TSC_CR_IODEF)
+
+/**
+ * @brief Set synchronization polarity to falling edge
+ * @param __HANDLE__: TSC handle
+ * @retval None
+ */
+#define __HAL_TSC_SET_SYNC_POL_FALL(__HANDLE__) ((__HANDLE__)->Instance->CR &= (uint32_t)(~TSC_CR_SYNCPOL))
+
+/**
+ * @brief Set synchronization polarity to rising edge and high level
+ * @param __HANDLE__: TSC handle
+ * @retval None
+ */
+#define __HAL_TSC_SET_SYNC_POL_RISE_HIGH(__HANDLE__) ((__HANDLE__)->Instance->CR |= TSC_CR_SYNCPOL)
+
+/**
+ * @brief Enable TSC interrupt.
+ * @param __HANDLE__: TSC handle
+ * @param __INTERRUPT__: TSC interrupt
+ * @retval None
+ */
+#define __HAL_TSC_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__))
+
+/**
+ * @brief Disable TSC interrupt.
+ * @param __HANDLE__: TSC handle
+ * @param __INTERRUPT__: TSC interrupt
+ * @retval None
+ */
+#define __HAL_TSC_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= (uint32_t)(~(__INTERRUPT__)))
+
+/** @brief Check if the specified TSC interrupt source is enabled or disabled.
+ * @param __HANDLE__: TSC Handle
+ * @param __INTERRUPT__: TSC interrupt
+ * @retval SET or RESET
+ */
+#define __HAL_TSC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/**
+ * @brief Get the selected TSC's flag status.
+ * @param __HANDLE__: TSC handle
+ * @param __FLAG__: TSC flag
+ * @retval SET or RESET
+ */
+#define __HAL_TSC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__)) ? SET : RESET)
+
+/**
+ * @brief Clear the TSC's pending flag.
+ * @param __HANDLE__: TSC handle
+ * @param __FLAG__: TSC flag
+ * @retval None
+ */
+#define __HAL_TSC_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
+
+/**
+ * @brief Enable schmitt trigger hysteresis on a group of IOs
+ * @param __HANDLE__: TSC handle
+ * @param __GX_IOY_MASK__: IOs mask
+ * @retval None
+ */
+#define __HAL_TSC_ENABLE_HYSTERESIS(__HANDLE__, __GX_IOY_MASK__) ((__HANDLE__)->Instance->IOHCR |= (__GX_IOY_MASK__))
+
+/**
+ * @brief Disable schmitt trigger hysteresis on a group of IOs
+ * @param __HANDLE__: TSC handle
+ * @param __GX_IOY_MASK__: IOs mask
+ * @retval None
+ */
+#define __HAL_TSC_DISABLE_HYSTERESIS(__HANDLE__, __GX_IOY_MASK__) ((__HANDLE__)->Instance->IOHCR &= (uint32_t)(~(__GX_IOY_MASK__)))
+
+/**
+ * @brief Open analog switch on a group of IOs
+ * @param __HANDLE__: TSC handle
+ * @param __GX_IOY_MASK__: IOs mask
+ * @retval None
+ */
+#define __HAL_TSC_OPEN_ANALOG_SWITCH(__HANDLE__, __GX_IOY_MASK__) ((__HANDLE__)->Instance->IOASCR &= (uint32_t)(~(__GX_IOY_MASK__)))
+
+/**
+ * @brief Close analog switch on a group of IOs
+ * @param __HANDLE__: TSC handle
+ * @param __GX_IOY_MASK__: IOs mask
+ * @retval None
+ */
+#define __HAL_TSC_CLOSE_ANALOG_SWITCH(__HANDLE__, __GX_IOY_MASK__) ((__HANDLE__)->Instance->IOASCR |= (__GX_IOY_MASK__))
+
+/**
+ * @brief Enable a group of IOs in channel mode
+ * @param __HANDLE__: TSC handle
+ * @param __GX_IOY_MASK__: IOs mask
+ * @retval None
+ */
+#define __HAL_TSC_ENABLE_CHANNEL(__HANDLE__, __GX_IOY_MASK__) ((__HANDLE__)->Instance->IOCCR |= (__GX_IOY_MASK__))
+
+/**
+ * @brief Disable a group of channel IOs
+ * @param __HANDLE__: TSC handle
+ * @param __GX_IOY_MASK__: IOs mask
+ * @retval None
+ */
+#define __HAL_TSC_DISABLE_CHANNEL(__HANDLE__, __GX_IOY_MASK__) ((__HANDLE__)->Instance->IOCCR &= (uint32_t)(~(__GX_IOY_MASK__)))
+
+/**
+ * @brief Enable a group of IOs in sampling mode
+ * @param __HANDLE__: TSC handle
+ * @param __GX_IOY_MASK__: IOs mask
+ * @retval None
+ */
+#define __HAL_TSC_ENABLE_SAMPLING(__HANDLE__, __GX_IOY_MASK__) ((__HANDLE__)->Instance->IOSCR |= (__GX_IOY_MASK__))
+
+/**
+ * @brief Disable a group of sampling IOs
+ * @param __HANDLE__: TSC handle
+ * @param __GX_IOY_MASK__: IOs mask
+ * @retval None
+ */
+#define __HAL_TSC_DISABLE_SAMPLING(__HANDLE__, __GX_IOY_MASK__) ((__HANDLE__)->Instance->IOSCR &= (uint32_t)(~(__GX_IOY_MASK__)))
+
+/**
+ * @brief Enable acquisition groups
+ * @param __HANDLE__: TSC handle
+ * @param __GX_MASK__: Groups mask
+ * @retval None
+ */
+#define __HAL_TSC_ENABLE_GROUP(__HANDLE__, __GX_MASK__) ((__HANDLE__)->Instance->IOGCSR |= (__GX_MASK__))
+
+/**
+ * @brief Disable acquisition groups
+ * @param __HANDLE__: TSC handle
+ * @param __GX_MASK__: Groups mask
+ * @retval None
+ */
+#define __HAL_TSC_DISABLE_GROUP(__HANDLE__, __GX_MASK__) ((__HANDLE__)->Instance->IOGCSR &= (uint32_t)(~(__GX_MASK__)))
+
+/** @brief Gets acquisition group status
+ * @param __HANDLE__: TSC Handle
+ * @param __GX_INDEX__: Group index
+ * @retval SET or RESET
+ */
+#define __HAL_TSC_GET_GROUP_STATUS(__HANDLE__, __GX_INDEX__) \
+((((__HANDLE__)->Instance->IOGCSR & (uint32_t)((uint32_t)1 << ((__GX_INDEX__) + (uint32_t)16))) == (uint32_t)((uint32_t)1 << ((__GX_INDEX__) + (uint32_t)16))) ? TSC_GROUP_COMPLETED : TSC_GROUP_ONGOING)
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup TSC_Exported_Functions TSC Exported Functions
+ * @{
+ */
+
+/** @addtogroup TSC_Exported_Functions_Group1 Initialization/de-initialization functions
+ * @brief Initialization and Configuration functions
+ * @{
+ */
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_TSC_Init(TSC_HandleTypeDef* htsc);
+HAL_StatusTypeDef HAL_TSC_DeInit(TSC_HandleTypeDef *htsc);
+void HAL_TSC_MspInit(TSC_HandleTypeDef* htsc);
+void HAL_TSC_MspDeInit(TSC_HandleTypeDef* htsc);
+/**
+ * @}
+ */
+
+/** @addtogroup TSC_Exported_Functions_Group2 IO operation functions
+ * @brief IO operation functions * @{
+ */
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_TSC_Start(TSC_HandleTypeDef* htsc);
+HAL_StatusTypeDef HAL_TSC_Start_IT(TSC_HandleTypeDef* htsc);
+HAL_StatusTypeDef HAL_TSC_Stop(TSC_HandleTypeDef* htsc);
+HAL_StatusTypeDef HAL_TSC_Stop_IT(TSC_HandleTypeDef* htsc);
+TSC_GroupStatusTypeDef HAL_TSC_GroupGetStatus(TSC_HandleTypeDef* htsc, uint32_t gx_index);
+uint32_t HAL_TSC_GroupGetValue(TSC_HandleTypeDef* htsc, uint32_t gx_index);
+/**
+ * @}
+ */
+
+/** @addtogroup TSC_Exported_Functions_Group3 Peripheral Control functions
+ * @brief Peripheral Control functions
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_TSC_IOConfig(TSC_HandleTypeDef* htsc, TSC_IOConfigTypeDef* config);
+HAL_StatusTypeDef HAL_TSC_IODischarge(TSC_HandleTypeDef* htsc, uint32_t choice);
+/**
+ * @}
+ */
+
+/** @addtogroup TSC_Exported_Functions_Group4 State functions
+ * @brief State functions
+ * @{
+ */
+/* Peripheral State and Error functions ***************************************/
+HAL_TSC_StateTypeDef HAL_TSC_GetState(TSC_HandleTypeDef* htsc);
+HAL_StatusTypeDef HAL_TSC_PollForAcquisition(TSC_HandleTypeDef* htsc);
+void HAL_TSC_IRQHandler(TSC_HandleTypeDef* htsc);
+/**
+ * @}
+ */
+
+/** @addtogroup TSC_Exported_Functions_Group5 Callback functions
+ * @brief Callback functions
+ * @{
+ */
+/* Callback functions *********************************************************/
+void HAL_TSC_ConvCpltCallback(TSC_HandleTypeDef* htsc);
+void HAL_TSC_ErrorCallback(TSC_HandleTypeDef* htsc);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined(STM32F051x8) || defined(STM32F071xB) || defined(STM32F091xC) || */
+ /* defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || */
+ /* defined(STM32F058xx) || defined(STM32F078xx) || defined(STM32F098xx) */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F0xx_TSC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/include/stm32f0xx_hal_uart.h b/f0/include/stm32f0xx_hal_uart.h
new file mode 100755
index 0000000000000000000000000000000000000000..12f824af677deaab6ae001b4d7117223c7ed547b
--- /dev/null
+++ b/f0/include/stm32f0xx_hal_uart.h
@@ -0,0 +1,934 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_uart.h
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief Header file of UART HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_UART_H
+#define __STM32F0xx_HAL_UART_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup UART
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup UART_Exported_Types UART Exported Types
+ * @{
+ */
+
+
+/**
+ * @brief UART Init Structure definition
+ */
+typedef struct
+{
+ uint32_t BaudRate; /*!< This member configures the UART communication baud rate.
+ The baud rate register is computed using the following formula:
+ - If oversampling is 16 or in LIN mode (LIN mode not available on F030xx devices),
+ Baud Rate Register = ((PCLKx) / ((huart->Init.BaudRate)))
+ - If oversampling is 8,
+ Baud Rate Register[15:4] = ((2 * PCLKx) / ((huart->Init.BaudRate)))[15:4]
+ Baud Rate Register[3] = 0
+ Baud Rate Register[2:0] = (((2 * PCLKx) / ((huart->Init.BaudRate)))[3:0]) >> 1 */
+
+ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter can be a value of @ref UARTEx_Word_Length */
+
+ uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
+ This parameter can be a value of @ref UART_Stop_Bits */
+
+ uint32_t Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref UART_Parity
+ @note When parity is enabled, the computed parity is inserted
+ at the MSB position of the transmitted data (9th bit when
+ the word length is set to 9 data bits; 8th bit when the
+ word length is set to 8 data bits). */
+
+ uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref UART_Mode */
+
+ uint32_t HwFlowCtl; /*!< Specifies whether the hardware flow control mode is enabled
+ or disabled.
+ This parameter can be a value of @ref UART_Hardware_Flow_Control */
+
+ uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled, to achieve higher speed (up to fPCLK/8).
+ This parameter can be a value of @ref UART_Over_Sampling */
+
+ uint32_t OneBitSampling; /*!< Specifies whether a single sample or three samples' majority vote is selected.
+ Selecting the single sample method increases the receiver tolerance to clock
+ deviations. This parameter can be a value of @ref UART_OneBit_Sampling. */
+}UART_InitTypeDef;
+
+/**
+ * @brief UART Advanced Features initalization structure definition
+ */
+typedef struct
+{
+ uint32_t AdvFeatureInit; /*!< Specifies which advanced UART features is initialized. Several
+ Advanced Features may be initialized at the same time .
+ This parameter can be a value of @ref UART_Advanced_Features_Initialization_Type */
+
+ uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted.
+ This parameter can be a value of @ref UART_Tx_Inv */
+
+ uint32_t RxPinLevelInvert; /*!< Specifies whether the RX pin active level is inverted.
+ This parameter can be a value of @ref UART_Rx_Inv */
+
+ uint32_t DataInvert; /*!< Specifies whether data are inverted (positive/direct logic
+ vs negative/inverted logic).
+ This parameter can be a value of @ref UART_Data_Inv */
+
+ uint32_t Swap; /*!< Specifies whether TX and RX pins are swapped.
+ This parameter can be a value of @ref UART_Rx_Tx_Swap */
+
+ uint32_t OverrunDisable; /*!< Specifies whether the reception overrun detection is disabled.
+ This parameter can be a value of @ref UART_Overrun_Disable */
+
+ uint32_t DMADisableonRxError; /*!< Specifies whether the DMA is disabled in case of reception error.
+ This parameter can be a value of @ref UART_DMA_Disable_on_Rx_Error */
+
+ uint32_t AutoBaudRateEnable; /*!< Specifies whether auto Baud rate detection is enabled.
+ This parameter can be a value of @ref UART_AutoBaudRate_Enable */
+
+ uint32_t AutoBaudRateMode; /*!< If auto Baud rate detection is enabled, specifies how the rate
+ detection is carried out.
+ This parameter can be a value of @ref UARTEx_AutoBaud_Rate_Mode */
+
+ uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line.
+ This parameter can be a value of @ref UART_MSB_First */
+} UART_AdvFeatureInitTypeDef;
+
+/**
+ * @brief HAL UART State structures definition
+ */
+typedef enum
+{
+ HAL_UART_STATE_RESET = 0x00, /*!< Peripheral is not initialized */
+ HAL_UART_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_UART_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_UART_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
+ HAL_UART_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
+ HAL_UART_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */
+ HAL_UART_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_UART_STATE_ERROR = 0x04 /*!< Error */
+}HAL_UART_StateTypeDef;
+
+/**
+ * @brief UART clock sources definition
+ */
+typedef enum
+{
+ UART_CLOCKSOURCE_PCLK1 = 0x00, /*!< PCLK1 clock source */
+ UART_CLOCKSOURCE_HSI = 0x02, /*!< HSI clock source */
+ UART_CLOCKSOURCE_SYSCLK = 0x04, /*!< SYSCLK clock source */
+ UART_CLOCKSOURCE_LSE = 0x08, /*!< LSE clock source */
+ UART_CLOCKSOURCE_UNDEFINED = 0x10 /*!< undefined clock source */
+}UART_ClockSourceTypeDef;
+
+/**
+ * @brief UART handle Structure definition
+ */
+typedef struct
+{
+ USART_TypeDef *Instance; /*!< UART registers base address */
+
+ UART_InitTypeDef Init; /*!< UART communication parameters */
+
+ UART_AdvFeatureInitTypeDef AdvancedInit; /*!< UART Advanced Features initialization parameters */
+
+ uint8_t *pTxBuffPtr; /*!< Pointer to UART Tx transfer Buffer */
+
+ uint16_t TxXferSize; /*!< UART Tx Transfer size */
+
+ uint16_t TxXferCount; /*!< UART Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /*!< Pointer to UART Rx transfer Buffer */
+
+ uint16_t RxXferSize; /*!< UART Rx Transfer size */
+
+ uint16_t RxXferCount; /*!< UART Rx Transfer Counter */
+
+ uint16_t Mask; /*!< UART Rx RDR register mask */
+
+ DMA_HandleTypeDef *hdmatx; /*!< UART Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< UART Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< Locking object */
+
+ HAL_UART_StateTypeDef State; /*!< UART communication state */
+
+ __IO uint32_t ErrorCode; /*!< UART Error code
+ This parameter can be a value of @ref UART_Error */
+
+}UART_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup UART_Exported_Constants UART Exported constants
+ * @{
+ */
+
+/** @defgroup UART_Error UART Error
+ * @{
+ */
+#define HAL_UART_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_UART_ERROR_PE ((uint32_t)0x00000001) /*!< Parity error */
+#define HAL_UART_ERROR_NE ((uint32_t)0x00000002) /*!< Noise error */
+#define HAL_UART_ERROR_FE ((uint32_t)0x00000004) /*!< frame error */
+#define HAL_UART_ERROR_ORE ((uint32_t)0x00000008) /*!< Overrun error */
+#define HAL_UART_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */
+/**
+ * @}
+ */
+
+/** @defgroup UART_Stop_Bits UART Number of Stop Bits
+ * @{
+ */
+#define UART_STOPBITS_1 ((uint32_t)0x0000)
+#define UART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1)
+#define UART_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1))
+#define IS_UART_STOPBITS(STOPBITS) (((STOPBITS) == UART_STOPBITS_1) || \
+ ((STOPBITS) == UART_STOPBITS_2) || \
+ ((STOPBITS) == UART_STOPBITS_1_5))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Parity UART Parity
+ * @{
+ */
+#define UART_PARITY_NONE ((uint32_t)0x0000)
+#define UART_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
+#define UART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
+#define IS_UART_PARITY(PARITY) (((PARITY) == UART_PARITY_NONE) || \
+ ((PARITY) == UART_PARITY_EVEN) || \
+ ((PARITY) == UART_PARITY_ODD))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control
+ * @{
+ */
+#define UART_HWCONTROL_NONE ((uint32_t)0x0000)
+#define UART_HWCONTROL_RTS ((uint32_t)USART_CR3_RTSE)
+#define UART_HWCONTROL_CTS ((uint32_t)USART_CR3_CTSE)
+#define UART_HWCONTROL_RTS_CTS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE))
+#define IS_UART_HARDWARE_FLOW_CONTROL(CONTROL)\
+ (((CONTROL) == UART_HWCONTROL_NONE) || \
+ ((CONTROL) == UART_HWCONTROL_RTS) || \
+ ((CONTROL) == UART_HWCONTROL_CTS) || \
+ ((CONTROL) == UART_HWCONTROL_RTS_CTS))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Mode UART Transfer Mode
+ * @{
+ */
+#define UART_MODE_RX ((uint32_t)USART_CR1_RE)
+#define UART_MODE_TX ((uint32_t)USART_CR1_TE)
+#define UART_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
+#define IS_UART_MODE(MODE) ((((MODE) & (~((uint32_t)(UART_MODE_TX_RX)))) == (uint32_t)0x00) && ((MODE) != (uint32_t)0x00))
+/**
+ * @}
+ */
+
+ /** @defgroup UART_State UART State
+ * @{
+ */
+#define UART_STATE_DISABLE ((uint32_t)0x0000)
+#define UART_STATE_ENABLE ((uint32_t)USART_CR1_UE)
+#define IS_UART_STATE(STATE) (((STATE) == UART_STATE_DISABLE) || \
+ ((STATE) == UART_STATE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Over_Sampling UART Over Sampling
+ * @{
+ */
+#define UART_OVERSAMPLING_16 ((uint32_t)0x0000)
+#define UART_OVERSAMPLING_8 ((uint32_t)USART_CR1_OVER8)
+#define IS_UART_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16) || \
+ ((SAMPLING) == UART_OVERSAMPLING_8))
+/**
+ * @}
+ */
+
+/** @defgroup UART_OneBit_Sampling UART One Bit Sampling Method
+ * @{
+ */
+#define UART_ONEBIT_SAMPLING_DISABLED ((uint32_t)0x0000)
+#define UART_ONEBIT_SAMPLING_ENABLED ((uint32_t)USART_CR3_ONEBIT)
+#define IS_UART_ONEBIT_SAMPLING(ONEBIT) (((ONEBIT) == UART_ONEBIT_SAMPLING_DISABLED) || \
+ ((ONEBIT) == UART_ONEBIT_SAMPLING_ENABLED))
+/**
+ * @}
+ */
+
+
+/** @defgroup UART_Receiver_TimeOut UART Receiver TimeOut
+ * @{
+ */
+#define UART_RECEIVER_TIMEOUT_DISABLE ((uint32_t)0x00000000)
+#define UART_RECEIVER_TIMEOUT_ENABLE ((uint32_t)USART_CR2_RTOEN)
+#define IS_UART_RECEIVER_TIMEOUT(TIMEOUT) (((TIMEOUT) == UART_RECEIVER_TIMEOUT_DISABLE) || \
+ ((TIMEOUT) == UART_RECEIVER_TIMEOUT_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_One_Bit UART One Bit sampling
+ * @{
+ */
+#define UART_ONE_BIT_SAMPLE_DISABLED ((uint32_t)0x00000000)
+#define UART_ONE_BIT_SAMPLE_ENABLED ((uint32_t)USART_CR3_ONEBIT)
+#define IS_UART_ONEBIT_SAMPLE(ONEBIT) (((ONEBIT) == UART_ONE_BIT_SAMPLE_DISABLED) || \
+ ((ONEBIT) == UART_ONE_BIT_SAMPLE_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup UART_DMA_Tx UART DMA Tx
+ * @{
+ */
+#define UART_DMA_TX_DISABLE ((uint32_t)0x00000000)
+#define UART_DMA_TX_ENABLE ((uint32_t)USART_CR3_DMAT)
+#define IS_UART_DMA_TX(DMATX) (((DMATX) == UART_DMA_TX_DISABLE) || \
+ ((DMATX) == UART_DMA_TX_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_DMA_Rx UART DMA Rx
+ * @{
+ */
+#define UART_DMA_RX_DISABLE ((uint32_t)0x0000)
+#define UART_DMA_RX_ENABLE ((uint32_t)USART_CR3_DMAR)
+#define IS_UART_DMA_RX(DMARX) (((DMARX) == UART_DMA_RX_DISABLE) || \
+ ((DMARX) == UART_DMA_RX_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Half_Duplex_Selection UART Half Duplex Selection
+ * @{
+ */
+#define UART_HALF_DUPLEX_DISABLE ((uint32_t)0x0000)
+#define UART_HALF_DUPLEX_ENABLE ((uint32_t)USART_CR3_HDSEL)
+#define IS_UART_HALF_DUPLEX(HDSEL) (((HDSEL) == UART_HALF_DUPLEX_DISABLE) || \
+ ((HDSEL) == UART_HALF_DUPLEX_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_WakeUp_Address_Length UART WakeUp Address Length
+ * @{
+ */
+#define UART_ADDRESS_DETECT_4B ((uint32_t)0x00000000)
+#define UART_ADDRESS_DETECT_7B ((uint32_t)USART_CR2_ADDM7)
+#define IS_UART_ADDRESSLENGTH_DETECT(ADDRESS) (((ADDRESS) == UART_ADDRESS_DETECT_4B) || \
+ ((ADDRESS) == UART_ADDRESS_DETECT_7B))
+/**
+ * @}
+ */
+
+/** @defgroup UART_WakeUp_Methods UART WakeUp Methods
+ * @{
+ */
+#define UART_WAKEUPMETHOD_IDLELINE ((uint32_t)0x00000000)
+#define UART_WAKEUPMETHOD_ADDRESSMARK ((uint32_t)USART_CR1_WAKE)
+#define IS_UART_WAKEUPMETHOD(WAKEUP) (((WAKEUP) == UART_WAKEUPMETHOD_IDLELINE) || \
+ ((WAKEUP) == UART_WAKEUPMETHOD_ADDRESSMARK))
+/**
+ * @}
+ */
+
+/** @defgroup UART_IT UART IT
+ * Elements values convention: 000000000XXYYYYYb
+ * - YYYYY : Interrupt source position in the XX register (5bits)
+ * - XX : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR2 register
+ * - 11: CR3 register
+ * @{
+ */
+#define UART_IT_ERR ((uint16_t)0x0060)
+
+/** Elements values convention: 0000ZZZZ00000000b
+ * - ZZZZ : Flag position in the ISR register(4bits)
+ */
+#define UART_IT_ORE ((uint16_t)0x0300)
+#define UART_IT_NE ((uint16_t)0x0200)
+#define UART_IT_FE ((uint16_t)0x0100)
+/**
+ * @}
+ */
+
+/** @defgroup UART_Advanced_Features_Initialization_Type UART Advanced Feature Initialization Type
+ * @{
+ */
+#define UART_ADVFEATURE_NO_INIT ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_TXINVERT_INIT ((uint32_t)0x00000001)
+#define UART_ADVFEATURE_RXINVERT_INIT ((uint32_t)0x00000002)
+#define UART_ADVFEATURE_DATAINVERT_INIT ((uint32_t)0x00000004)
+#define UART_ADVFEATURE_SWAP_INIT ((uint32_t)0x00000008)
+#define UART_ADVFEATURE_RXOVERRUNDISABLE_INIT ((uint32_t)0x00000010)
+#define UART_ADVFEATURE_DMADISABLEONERROR_INIT ((uint32_t)0x00000020)
+#define UART_ADVFEATURE_AUTOBAUDRATE_INIT ((uint32_t)0x00000040)
+#define UART_ADVFEATURE_MSBFIRST_INIT ((uint32_t)0x00000080)
+#define IS_UART_ADVFEATURE_INIT(INIT) ((INIT) <= (UART_ADVFEATURE_NO_INIT | \
+ UART_ADVFEATURE_TXINVERT_INIT | \
+ UART_ADVFEATURE_RXINVERT_INIT | \
+ UART_ADVFEATURE_DATAINVERT_INIT | \
+ UART_ADVFEATURE_SWAP_INIT | \
+ UART_ADVFEATURE_RXOVERRUNDISABLE_INIT | \
+ UART_ADVFEATURE_DMADISABLEONERROR_INIT | \
+ UART_ADVFEATURE_AUTOBAUDRATE_INIT | \
+ UART_ADVFEATURE_MSBFIRST_INIT))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Tx_Inv UART Advanced Feature TX Pin Active Level Inversion
+ * @{
+ */
+#define UART_ADVFEATURE_TXINV_DISABLE ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_TXINV_ENABLE ((uint32_t)USART_CR2_TXINV)
+#define IS_UART_ADVFEATURE_TXINV(TXINV) (((TXINV) == UART_ADVFEATURE_TXINV_DISABLE) || \
+ ((TXINV) == UART_ADVFEATURE_TXINV_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Rx_Inv UART Advanced Feature RX Pin Active Level Inversion
+ * @{
+ */
+#define UART_ADVFEATURE_RXINV_DISABLE ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_RXINV_ENABLE ((uint32_t)USART_CR2_RXINV)
+#define IS_UART_ADVFEATURE_RXINV(RXINV) (((RXINV) == UART_ADVFEATURE_RXINV_DISABLE) || \
+ ((RXINV) == UART_ADVFEATURE_RXINV_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Data_Inv UART Advanced Feature Binary Data Inversion
+ * @{
+ */
+#define UART_ADVFEATURE_DATAINV_DISABLE ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_DATAINV_ENABLE ((uint32_t)USART_CR2_DATAINV)
+#define IS_UART_ADVFEATURE_DATAINV(DATAINV) (((DATAINV) == UART_ADVFEATURE_DATAINV_DISABLE) || \
+ ((DATAINV) == UART_ADVFEATURE_DATAINV_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Rx_Tx_Swap UART Advanced Feature RX TX Pins Swap
+ * @{
+ */
+#define UART_ADVFEATURE_SWAP_DISABLE ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_SWAP_ENABLE ((uint32_t)USART_CR2_SWAP)
+#define IS_UART_ADVFEATURE_SWAP(SWAP) (((SWAP) == UART_ADVFEATURE_SWAP_DISABLE) || \
+ ((SWAP) == UART_ADVFEATURE_SWAP_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Overrun_Disable UART Advanced Feature Overrun Disable
+ * @{
+ */
+#define UART_ADVFEATURE_OVERRUN_ENABLE ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_OVERRUN_DISABLE ((uint32_t)USART_CR3_OVRDIS)
+#define IS_UART_OVERRUN(OVERRUN) (((OVERRUN) == UART_ADVFEATURE_OVERRUN_ENABLE) || \
+ ((OVERRUN) == UART_ADVFEATURE_OVERRUN_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_AutoBaudRate_Enable UART Advanced Feature Auto BaudRate Enable
+ * @{
+ */
+#define UART_ADVFEATURE_AUTOBAUDRATE_DISABLE ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_AUTOBAUDRATE_ENABLE ((uint32_t)USART_CR2_ABREN)
+#define IS_UART_ADVFEATURE_AUTOBAUDRATE(AUTOBAUDRATE) (((AUTOBAUDRATE) == UART_ADVFEATURE_AUTOBAUDRATE_DISABLE) || \
+ ((AUTOBAUDRATE) == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_DMA_Disable_on_Rx_Error UART Advanced Feature DMA Disable On Rx Error
+ * @{
+ */
+#define UART_ADVFEATURE_DMA_ENABLEONRXERROR ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_DMA_DISABLEONRXERROR ((uint32_t)USART_CR3_DDRE)
+#define IS_UART_ADVFEATURE_DMAONRXERROR(DMA) (((DMA) == UART_ADVFEATURE_DMA_ENABLEONRXERROR) || \
+ ((DMA) == UART_ADVFEATURE_DMA_DISABLEONRXERROR))
+/**
+ * @}
+ */
+
+/** @defgroup UART_MSB_First UART Advanced Feature MSB First
+ * @{
+ */
+#define UART_ADVFEATURE_MSBFIRST_DISABLE ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_MSBFIRST_ENABLE ((uint32_t)USART_CR2_MSBFIRST)
+#define IS_UART_ADVFEATURE_MSBFIRST(MSBFIRST) (((MSBFIRST) == UART_ADVFEATURE_MSBFIRST_DISABLE) || \
+ ((MSBFIRST) == UART_ADVFEATURE_MSBFIRST_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Mute_Mode UART Advanced Feature Mute Mode Enable
+ * @{
+ */
+#define UART_ADVFEATURE_MUTEMODE_DISABLE ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_MUTEMODE_ENABLE ((uint32_t)USART_CR1_MME)
+#define IS_UART_MUTE_MODE(MUTE) (((MUTE) == UART_ADVFEATURE_MUTEMODE_DISABLE) || \
+ ((MUTE) == UART_ADVFEATURE_MUTEMODE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_CR2_ADDRESS_LSB_POS UART Address-matching LSB Position In CR2 Register
+ * @{
+ */
+#define UART_CR2_ADDRESS_LSB_POS ((uint32_t) 24)
+/**
+ * @}
+ */
+
+/** @defgroup UART_DriverEnable_Polarity UART DriverEnable Polarity
+ * @{
+ */
+#define UART_DE_POLARITY_HIGH ((uint32_t)0x00000000)
+#define UART_DE_POLARITY_LOW ((uint32_t)USART_CR3_DEP)
+#define IS_UART_DE_POLARITY(POLARITY) (((POLARITY) == UART_DE_POLARITY_HIGH) || \
+ ((POLARITY) == UART_DE_POLARITY_LOW))
+/**
+ * @}
+ */
+
+/** @defgroup UART_CR1_DEAT_ADDRESS_LSB_POS UART Driver Enable Assertion Time LSB Position In CR1 Register
+ * @{
+ */
+#define UART_CR1_DEAT_ADDRESS_LSB_POS ((uint32_t) 21)
+/**
+ * @}
+ */
+
+/** @defgroup UART_CR1_DEDT_ADDRESS_LSB_POS UART Driver Enable DeAssertion Time LSB Position In CR1 Register
+ * @{
+ */
+#define UART_CR1_DEDT_ADDRESS_LSB_POS ((uint32_t) 16)
+/**
+ * @}
+ */
+
+/** @defgroup UART_Interruption_Mask UART Interruptions Flag Mask
+ * @{
+ */
+#define UART_IT_MASK ((uint32_t)0x001F)
+/**
+ * @}
+ */
+
+/** @defgroup UART_TimeOut_Value UART polling-based communications time-out value
+ * @{
+ */
+#define HAL_UART_TIMEOUT_VALUE 0x1FFFFFF
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup UART_Exported_Macros UART Exported Macros
+ * @{
+ */
+
+/** @brief Reset UART handle state
+ * @param __HANDLE__: UART handle.
+ * @retval None
+ */
+#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_UART_STATE_RESET)
+
+/** @brief Checks whether the specified UART flag is set or not.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3 or 4 to select the USART or
+ * UART peripheral (datasheet: up to four USART/UARTs)
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg UART_FLAG_REACK: Receive enable ackowledge flag
+ * @arg UART_FLAG_TEACK: Transmit enable ackowledge flag
+ * @arg UART_FLAG_WUF: Wake up from stop mode flag (not available on F030xx devices)
+ * @arg UART_FLAG_RWU: Receiver wake up flag (not available on F030xx devices)
+ * @arg UART_FLAG_SBKF: Send Break flag
+ * @arg UART_FLAG_CMF: Character match flag
+ * @arg UART_FLAG_BUSY: Busy flag
+ * @arg UART_FLAG_ABRF: Auto Baud rate detection flag
+ * @arg UART_FLAG_ABRE: Auto Baud rate detection error flag
+ * @arg UART_FLAG_EOBF: End of block flag (not available on F030xx devices)
+ * @arg UART_FLAG_RTOF: Receiver timeout flag
+ * @arg UART_FLAG_CTS: CTS Change flag
+ * @arg UART_FLAG_LBD: LIN Break detection flag (not available on F030xx devices)
+ * @arg UART_FLAG_TXE: Transmit data register empty flag
+ * @arg UART_FLAG_TC: Transmission Complete flag
+ * @arg UART_FLAG_RXNE: Receive data register not empty flag
+ * @arg UART_FLAG_IDLE: Idle Line detection flag
+ * @arg UART_FLAG_ORE: OverRun Error flag
+ * @arg UART_FLAG_NE: Noise Error flag
+ * @arg UART_FLAG_FE: Framing Error flag
+ * @arg UART_FLAG_PE: Parity Error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Enables the specified UART interrupt.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3 or 4 to select the USART or
+ * UART peripheral. (datasheet: up to four USART/UARTs)
+ * @param __INTERRUPT__: specifies the UART interrupt source to enable.
+ * This parameter can be one of the following values:
+ * @arg UART_IT_WUF: Wakeup from stop mode interrupt (not available on F030xx devices)
+ * @arg UART_IT_CM: Character match interrupt
+ * @arg UART_IT_CTS: CTS change interrupt
+ * @arg UART_IT_LBD: LIN Break detection interrupt (not available on F030xx devices)
+ * @arg UART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg UART_IT_TC: Transmission complete interrupt
+ * @arg UART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg UART_IT_IDLE: Idle line detection interrupt
+ * @arg UART_IT_PE: Parity Error interrupt
+ * @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 |= (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
+ ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 |= (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 |= (1U << ((__INTERRUPT__) & UART_IT_MASK))))
+
+
+/** @brief Disables the specified UART interrupt.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3 or 4 to select the USART or
+ * UART peripheral. (datasheet: up to four USART/UARTs)
+ * @param __INTERRUPT__: specifies the UART interrupt source to disable.
+ * This parameter can be one of the following values:
+ * @arg UART_IT_WUF: Wakeup from stop mode interrupt (not available on F030xx devices)
+ * @arg UART_IT_CM: Character match interrupt
+ * @arg UART_IT_CTS: CTS change interrupt
+ * @arg UART_IT_LBD: LIN Break detection interrupt (not available on F030xx devices)
+ * @arg UART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg UART_IT_TC: Transmission complete interrupt
+ * @arg UART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg UART_IT_IDLE: Idle line detection interrupt
+ * @arg UART_IT_PE: Parity Error interrupt
+ * @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
+ ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK))))
+
+/** @brief Checks whether the specified UART interrupt has occurred or not.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3 or 4 to select the USART or
+ * UART peripheral. (datasheet: up to four USART/UARTs)
+ * @param __IT__: specifies the UART interrupt to check.
+ * This parameter can be one of the following values:
+ * @arg UART_IT_WUF: Wakeup from stop mode interrupt (not available on F030xx devices)
+ * @arg UART_IT_CM: Character match interrupt
+ * @arg UART_IT_CTS: CTS change interrupt
+ * @arg UART_IT_LBD: LIN Break detection interrupt (not available on F030xx devices)
+ * @arg UART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg UART_IT_TC: Transmission complete interrupt
+ * @arg UART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg UART_IT_IDLE: Idle line detection interrupt
+ * @arg UART_IT_ORE: OverRun Error interrupt
+ * @arg UART_IT_NE: Noise Error interrupt
+ * @arg UART_IT_FE: Framing Error interrupt
+ * @arg UART_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_UART_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & ((uint32_t)1 << ((__IT__)>> 0x08)))
+
+/** @brief Checks whether the specified UART interrupt source is enabled.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3 or 4 to select the USART or
+ * UART peripheral. (datasheet: up to four USART/UARTs)
+ * @param __IT__: specifies the UART interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg UART_IT_WUF: Wakeup from stop mode interrupt (not available on F030xx devices)
+ * @arg UART_IT_CM: Character match interrupt
+ * @arg UART_IT_CTS: CTS change interrupt
+ * @arg UART_IT_LBD: LIN Break detection interrupt (not available on F030xx devices)
+ * @arg UART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg UART_IT_TC: Transmission complete interrupt
+ * @arg UART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg UART_IT_IDLE: Idle line detection interrupt
+ * @arg UART_IT_ORE: OverRun Error interrupt
+ * @arg UART_IT_NE: Noise Error interrupt
+ * @arg UART_IT_FE: Framing Error interrupt
+ * @arg UART_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((uint8_t)(__IT__)) >> 5U) == 1)? (__HANDLE__)->Instance->CR1:(((((uint8_t)(__IT__)) >> 5U) == 2)? \
+ (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & ((uint32_t)1 << (((uint16_t)(__IT__)) & UART_IT_MASK)))
+
+/** @brief Clears the specified UART ISR flag, in setting the proper ICR register flag.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3 or 4 to select the USART or
+ * UART peripheral. (datasheet: up to four USART/UARTs)
+ * @param __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set
+ * to clear the corresponding interrupt
+ * This parameter can be one of the following values:
+ * @arg UART_CLEAR_PEF: Parity Error Clear Flag
+ * @arg UART_CLEAR_FEF: Framing Error Clear Flag
+ * @arg UART_CLEAR_NEF: Noise detected Clear Flag
+ * @arg UART_CLEAR_OREF: OverRun Error Clear Flag
+ * @arg UART_CLEAR_IDLEF: IDLE line detected Clear Flag
+ * @arg UART_CLEAR_TCF: Transmission Complete Clear Flag
+ * @arg UART_CLEAR_LBDF: LIN Break Detection Clear Flag (not available on F030xx devices)
+ * @arg UART_CLEAR_CTSF: CTS Interrupt Clear Flag
+ * @arg UART_CLEAR_RTOF: Receiver Time Out Clear Flag
+ * @arg UART_CLEAR_EOBF: End Of Block Clear Flag (not available on F030xx devices)
+ * @arg UART_CLEAR_CMF: Character Match Clear Flag
+ * @arg UART_CLEAR_WUF: Wake Up from stop mode Clear Flag (not available on F030xx devices)
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__))
+
+/** @brief Set a specific UART request flag.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3 or 4 to select the USART or
+ * UART peripheral. (datasheet: up to four USART/UARTs)
+ * @param __REQ__: specifies the request flag to set
+ * This parameter can be one of the following values:
+ * @arg UART_AUTOBAUD_REQUEST: Auto-Baud Rate Request
+ * @arg UART_SENDBREAK_REQUEST: Send Break Request
+ * @arg UART_MUTE_MODE_REQUEST: Mute Mode Request
+ * @arg UART_RXDATA_FLUSH_REQUEST: Receive Data flush Request
+ * @arg UART_TXDATA_FLUSH_REQUEST: Transmit data flush Request (not available on F030xx devices)
+ * @retval None
+ */
+#define __HAL_UART_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__))
+
+/** @brief Enable UART
+ * @param __HANDLE__: specifies the UART Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4 or 5 to select the UART peripheral
+ * @retval None
+ */
+#define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
+
+/** @brief Disable UART
+ * @param __HANDLE__: specifies the UART Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4 or 5 to select the UART peripheral
+ * @retval None
+ */
+#define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
+
+/**
+ * @}
+ */
+
+/* Private macros --------------------------------------------------------*/
+/** @defgroup UART_Private_Macros UART Private Macros
+ * @{
+ */
+
+/** @brief BRR division operation to set BRR register in 8-bit oversampling mode
+ * @param _PCLK_: UART clock
+ * @param _BAUD_: Baud rate set by the user
+ * @retval Division result
+ */
+#define __DIV_SAMPLING8(_PCLK_, _BAUD_) (((_PCLK_)*2)/((_BAUD_)))
+
+/** @brief BRR division operation to set BRR register in 16-bit oversampling mode
+ * @param _PCLK_: UART clock
+ * @param _BAUD_: Baud rate set by the user
+ * @retval Division result
+ */
+#define __DIV_SAMPLING16(_PCLK_, _BAUD_) (((_PCLK_))/((_BAUD_)))
+
+/** @brief Check UART Baud rate
+ * @param BAUDRATE: Baudrate specified by the user
+ * The maximum Baud Rate is derived from the maximum clock on F0 (i.e. 48 MHz)
+ * divided by the smallest oversampling used on the USART (i.e. 8)
+ * @retval Test result (TRUE or FALSE).
+ */
+#define IS_UART_BAUDRATE(BAUDRATE) ((BAUDRATE) < 9000001)
+
+/** @brief Check UART assertion time
+ * @param TIME: 5-bit value assertion time
+ * @retval Test result (TRUE or FALSE).
+ */
+#define IS_UART_ASSERTIONTIME(TIME) ((TIME) <= 0x1F)
+
+/** @brief Check UART deassertion time
+ * @param TIME: 5-bit value deassertion time
+ * @retval Test result (TRUE or FALSE).
+ */
+#define IS_UART_DEASSERTIONTIME(TIME) ((TIME) <= 0x1F)
+
+/**
+ * @}
+ */
+
+/* Include UART HAL Extension module */
+#include "stm32f0xx_hal_uart_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup UART_Exported_Functions UART Exported Functions
+ * @{
+ */
+
+/** @addtogroup UART_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod);
+HAL_StatusTypeDef HAL_UART_DeInit (UART_HandleTypeDef *huart);
+void HAL_UART_MspInit(UART_HandleTypeDef *huart);
+void HAL_UART_MspDeInit(UART_HandleTypeDef *huart);
+
+/**
+ * @}
+ */
+
+/** @addtogroup UART_Exported_Functions_Group2 IO operation functions
+ * @{
+ */
+
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart);
+void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart);
+
+/**
+ * @}
+ */
+
+/** @addtogroup UART_Exported_Functions_Group3 Peripheral Control functions
+ * @{
+ */
+
+/* Peripheral Control functions ***********************************************/
+void HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_MultiProcessor_EnableMuteMode(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_MultiProcessor_DisableMuteMode(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart);
+
+/**
+ * @}
+ */
+
+/** @addtogroup UART_Exported_Functions_Group4 Peripheral State and Errors functions
+ * @{
+ */
+
+/* Peripheral State and Errors functions **************************************************/
+HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart);
+uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup UART_Private_Functions
+ * @{
+ */
+void UART_AdvFeatureConfig(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef UART_Transmit_IT(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef UART_Receive_IT(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, uint32_t Timeout);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_UART_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/include/stm32f0xx_hal_uart_ex.h b/f0/include/stm32f0xx_hal_uart_ex.h
new file mode 100755
index 0000000000000000000000000000000000000000..97cc3947681aa4f1116fb3b30216ae8b16998467
--- /dev/null
+++ b/f0/include/stm32f0xx_hal_uart_ex.h
@@ -0,0 +1,770 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_uart_ex.h
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief Header file of UART HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_UART_EX_H
+#define __STM32F0xx_HAL_UART_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup UARTEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+/** @defgroup UARTEx_Exported_Types UARTEx Exported Types
+ * @{
+ */
+
+/**
+ * @brief UART wake up from stop mode parameters
+ */
+typedef struct
+{
+ uint32_t WakeUpEvent; /*!< Specifies which event will activat the Wakeup from Stop mode flag (WUF).
+ This parameter can be a value of @ref UART_WakeUp_from_Stop_Selection.
+ If set to UART_WAKEUP_ON_ADDRESS, the two other fields below must
+ be filled up. */
+
+ uint16_t AddressLength; /*!< Specifies whether the address is 4 or 7-bit long.
+ This parameter can be a value of @ref UART_WakeUp_Address_Length */
+
+ uint8_t Address; /*!< UART/USART node address (7-bit long max) */
+} UART_WakeUpTypeDef;
+/**
+ * @}
+ */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup UARTEx_Exported_Constants UARTEx Exported Constants
+ * @{
+ */
+
+/** @defgroup UARTEx_Word_Length UARTEx Word Length
+ * @{
+ */
+#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC)
+#define UART_WORDLENGTH_7B ((uint32_t)USART_CR1_M1)
+#define UART_WORDLENGTH_8B ((uint32_t)0x00000000)
+#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M0)
+#define IS_UART_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_7B) || \
+ ((LENGTH) == UART_WORDLENGTH_8B) || \
+ ((LENGTH) == UART_WORDLENGTH_9B))
+#else
+#define UART_WORDLENGTH_8B ((uint32_t)0x00000000)
+#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
+#define IS_UART_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B) || \
+ ((LENGTH) == UART_WORDLENGTH_9B))
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */
+/**
+ * @}
+ */
+
+/** @defgroup UARTEx_AutoBaud_Rate_Mode UARTEx Advanced Feature AutoBaud Rate Mode
+ * @{
+ */
+#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC)
+#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT ((uint32_t)0x0000)
+#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE ((uint32_t)USART_CR2_ABRMODE_0)
+#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME ((uint32_t)USART_CR2_ABRMODE_1)
+#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME ((uint32_t)USART_CR2_ABRMODE)
+#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(MODE) (((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) || \
+ ((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE) || \
+ ((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME) || \
+ ((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME))
+#else
+#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT ((uint32_t)0x0000)
+#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE ((uint32_t)USART_CR2_ABRMODE_0)
+#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(MODE) (((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) || \
+ ((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE))
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */
+/**
+ * @}
+ */
+
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+/** @defgroup UARTEx_LIN UARTEx Local Interconnection Network mode
+ * @{
+ */
+#define UART_LIN_DISABLE ((uint32_t)0x00000000)
+#define UART_LIN_ENABLE ((uint32_t)USART_CR2_LINEN)
+#define IS_UART_LIN(LIN) (((LIN) == UART_LIN_DISABLE) || \
+ ((LIN) == UART_LIN_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UARTEx_LIN_Break_Detection UARTEx LIN Break Detection
+ * @{
+ */
+#define UART_LINBREAKDETECTLENGTH_10B ((uint32_t)0x00000000)
+#define UART_LINBREAKDETECTLENGTH_11B ((uint32_t)USART_CR2_LBDL)
+#define IS_UART_LIN_BREAK_DETECT_LENGTH(LENGTH) (((LENGTH) == UART_LINBREAKDETECTLENGTH_10B) || \
+ ((LENGTH) == UART_LINBREAKDETECTLENGTH_11B))
+/**
+ * @}
+ */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
+
+/** @defgroup UART_Flags UARTEx Status Flags
+ * Elements values convention: 0xXXXX
+ * - 0xXXXX : Flag mask in the ISR register
+ * @{
+ */
+#define UART_FLAG_REACK ((uint32_t)0x00400000)
+#define UART_FLAG_TEACK ((uint32_t)0x00200000)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+#define UART_FLAG_WUF ((uint32_t)0x00100000)
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
+#define UART_FLAG_RWU ((uint32_t)0x00080000)
+#define UART_FLAG_SBKF ((uint32_t)0x00040000
+#define UART_FLAG_CMF ((uint32_t)0x00020000)
+#define UART_FLAG_BUSY ((uint32_t)0x00010000)
+#define UART_FLAG_ABRF ((uint32_t)0x00008000)
+#define UART_FLAG_ABRE ((uint32_t)0x00004000)
+#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#define UART_FLAG_EOBF ((uint32_t)0x00001000)
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#define UART_FLAG_RTOF ((uint32_t)0x00000800)
+#define UART_FLAG_CTS ((uint32_t)0x00000400)
+#define UART_FLAG_CTSIF ((uint32_t)0x00000200)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+#define UART_FLAG_LBDF ((uint32_t)0x00000100)
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
+#define UART_FLAG_TXE ((uint32_t)0x00000080)
+#define UART_FLAG_TC ((uint32_t)0x00000040)
+#define UART_FLAG_RXNE ((uint32_t)0x00000020)
+#define UART_FLAG_IDLE ((uint32_t)0x00000010)
+#define UART_FLAG_ORE ((uint32_t)0x00000008)
+#define UART_FLAG_NE ((uint32_t)0x00000004)
+#define UART_FLAG_FE ((uint32_t)0x00000002)
+#define UART_FLAG_PE ((uint32_t)0x00000001)
+/**
+ * @}
+ */
+
+/** @defgroup UART_Interrupt_definition UARTEx Interrupts Definition
+ * Elements values convention: 0000ZZZZZ0XXYYYYYb
+ * - YYYYY : Interrupt source position in the XX register (5bits)
+ * - XX : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR2 register
+ * - 11: CR3 register
+ * - ZZZZZ : Flag position in the ISR register(5bits)
+ * @{
+ */
+#define UART_IT_PE ((uint16_t)0x0028)
+#define UART_IT_TXE ((uint16_t)0x0727)
+#define UART_IT_TC ((uint16_t)0x0626)
+#define UART_IT_RXNE ((uint16_t)0x0525)
+#define UART_IT_IDLE ((uint16_t)0x0424)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+#define UART_IT_LBD ((uint16_t)0x0846)
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
+#define UART_IT_CTS ((uint16_t)0x096A)
+#define UART_IT_CM ((uint16_t)0x112E)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+#define UART_IT_WUF ((uint16_t)0x1476)
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
+/**
+ * @}
+ */
+
+
+/** @defgroup UART_IT_CLEAR_Flags UARTEx Interruption Clear Flags
+ * @{
+ */
+#define UART_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */
+#define UART_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */
+#define UART_CLEAR_NEF USART_ICR_NCF /*!< Noise detected Clear Flag */
+#define UART_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */
+#define UART_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */
+#define UART_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+#define UART_CLEAR_LBDF USART_ICR_LBDCF /*!< LIN Break Detection Clear Flag (not available on F030xx devices)*/
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
+#define UART_CLEAR_CTSF USART_ICR_CTSCF /*!< CTS Interrupt Clear Flag */
+#define UART_CLEAR_RTOF USART_ICR_RTOCF /*!< Receiver Time Out Clear Flag */
+#define UART_CLEAR_EOBF USART_ICR_EOBCF /*!< End Of Block Clear Flag */
+#define UART_CLEAR_CMF USART_ICR_CMCF /*!< Character Match Clear Flag */
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+#define UART_CLEAR_WUF USART_ICR_WUCF /*!< Wake Up from stop mode Clear Flag */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
+/**
+ * @}
+ */
+
+/** @defgroup UART_Request_Parameters UARTEx Request Parameters
+ * @{
+ */
+#define UART_AUTOBAUD_REQUEST ((uint32_t)USART_RQR_ABRRQ) /*!< Auto-Baud Rate Request */
+#define UART_SENDBREAK_REQUEST ((uint32_t)USART_RQR_SBKRQ) /*!< Send Break Request */
+#define UART_MUTE_MODE_REQUEST ((uint32_t)USART_RQR_MMRQ) /*!< Mute Mode Request */
+#define UART_RXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_RXFRQ) /*!< Receive Data flush Request */
+#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#define UART_TXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_TXFRQ) /*!< Transmit data flush Request */
+#define IS_UART_REQUEST_PARAMETER(PARAM) (((PARAM) == UART_AUTOBAUD_REQUEST) || \
+ ((PARAM) == UART_SENDBREAK_REQUEST) || \
+ ((PARAM) == UART_MUTE_MODE_REQUEST) || \
+ ((PARAM) == UART_RXDATA_FLUSH_REQUEST) || \
+ ((PARAM) == UART_TXDATA_FLUSH_REQUEST))
+#else
+#define IS_UART_REQUEST_PARAMETER(PARAM) (((PARAM) == UART_AUTOBAUD_REQUEST) || \
+ ((PARAM) == UART_SENDBREAK_REQUEST) || \
+ ((PARAM) == UART_MUTE_MODE_REQUEST) || \
+ ((PARAM) == UART_RXDATA_FLUSH_REQUEST))
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+/**
+ * @}
+ */
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+/** @defgroup UART_Stop_Mode_Enable UARTEx Advanced Feature Stop Mode Enable
+ * @{
+ */
+#define UART_ADVFEATURE_STOPMODE_DISABLE ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_STOPMODE_ENABLE ((uint32_t)USART_CR1_UESM)
+#define IS_UART_ADVFEATURE_STOPMODE(STOPMODE) (((STOPMODE) == UART_ADVFEATURE_STOPMODE_DISABLE) || \
+ ((STOPMODE) == UART_ADVFEATURE_STOPMODE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_WakeUp_from_Stop_Selection UART WakeUp From Stop Selection
+ * @{
+ */
+#define UART_WAKEUP_ON_ADDRESS ((uint32_t)0x0000)
+#define UART_WAKEUP_ON_STARTBIT ((uint32_t)USART_CR3_WUS_1)
+#define UART_WAKEUP_ON_READDATA_NONEMPTY ((uint32_t)USART_CR3_WUS)
+#define IS_UART_WAKEUP_SELECTION(WAKE) (((WAKE) == UART_WAKEUP_ON_ADDRESS) || \
+ ((WAKE) == UART_WAKEUP_ON_STARTBIT) || \
+ ((WAKE) == UART_WAKEUP_ON_READDATA_NONEMPTY))
+/**
+ * @}
+ */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup UARTEx_Exported_Macros UARTEx Exported Macros
+ * @{
+ */
+
+/** @brief Reports the UART clock source.
+ * @param __HANDLE__: specifies the UART Handle
+ * @param __CLOCKSOURCE__ : output variable
+ * @retval UART clocking source, written in __CLOCKSOURCE__.
+ */
+
+
+#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx)
+#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } while(0)
+#elif defined (STM32F030x8) || defined (STM32F070x6) || \
+ defined (STM32F042x6) || defined (STM32F048xx) || \
+ defined (STM32F051x8) || defined (STM32F058xx)
+#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+#elif defined(STM32F070xB)
+#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+#elif defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)
+#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+#elif defined(STM32F091xC) || defined (STM32F098xx)
+#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ switch(__HAL_RCC_GET_USART3_SOURCE()) \
+ { \
+ case RCC_USART3CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART3CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART3CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART3CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART5) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART6) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART7) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART8) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+#elif defined(STM32F030xC)
+#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART5) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART6) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+
+#endif /* defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) */
+
+
+/** @brief Computes the UART mask to apply to retrieve the received data
+ * according to the word length and to the parity bits activation.
+ * If PCE = 1, the parity bit is not included in the data extracted
+ * by the reception API().
+ * This masking operation is not carried out in the case of
+ * DMA transfers.
+ * @param __HANDLE__: specifies the UART Handle
+ * @retval none
+ */
+#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC)
+#define __HAL_UART_MASK_COMPUTATION(__HANDLE__) \
+ do { \
+ if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x01FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x007F ; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_7B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x007F ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x003F ; \
+ } \
+ } \
+} while(0)
+#else
+#define __HAL_UART_MASK_COMPUTATION(__HANDLE__) \
+ do { \
+ if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x01FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x007F ; \
+ } \
+ } \
+} while(0)
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup UARTEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup UARTEx_Exported_Functions_Group1
+ * @brief Extended Initialization and Configuration Functions
+ * @{
+ */
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t UART_DEPolarity, uint32_t UART_DEAssertionTime, uint32_t UART_DEDeassertionTime);
+#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC)
+HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength);
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) */
+/**
+ * @}
+ */
+
+/** @addtogroup UARTEx_Exported_Functions_Group2
+ * @brief Extended UART Interrupt handling function
+ * @{
+ */
+
+/* IO operation functions ***************************************************/
+void HAL_UART_IRQHandler(UART_HandleTypeDef *huart);
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC)
+void HAL_UART_WakeupCallback(UART_HandleTypeDef *huart);
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) */
+/**
+ * @}
+ */
+
+/** @addtogroup UARTEx_Exported_Functions_Group3
+ * @brief Extended Peripheral Control functions
+ * @{
+ */
+
+/* Peripheral Control functions **********************************************/
+HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength);
+#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6) && !defined(STM32F030xC)
+HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection);
+HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart);
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) */
+/**
+ * @}
+ */
+/* Peripheral State functions ************************************************/
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_UART_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/include/stm32f0xx_hal_usart.h b/f0/include/stm32f0xx_hal_usart.h
new file mode 100755
index 0000000000000000000000000000000000000000..b3d663b13a55b0962601b301fd0c5b8c7246b7ab
--- /dev/null
+++ b/f0/include/stm32f0xx_hal_usart.h
@@ -0,0 +1,595 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_usart.h
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief Header file of USART HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_USART_H
+#define __STM32F0xx_HAL_USART_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup USART
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup USART_Exported_Types USART Exported Types
+ * @{
+ */
+
+
+/**
+ * @brief USART Init Structure definition
+ */
+typedef struct
+{
+ uint32_t BaudRate; /*!< This member configures the Usart communication baud rate.
+ The baud rate is computed using the following formula:
+ Baud Rate Register = ((PCLKx) / ((huart->Init.BaudRate))) */
+
+ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter can be a value of @ref USARTEx_Word_Length */
+
+ uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
+ This parameter can be a value of @ref USART_Stop_Bits */
+
+ uint32_t Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref USART_Parity
+ @note When parity is enabled, the computed parity is inserted
+ at the MSB position of the transmitted data (9th bit when
+ the word length is set to 9 data bits; 8th bit when the
+ word length is set to 8 data bits). */
+
+ uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref USART_Mode */
+
+ uint32_t CLKPolarity; /*!< Specifies the steady state of the serial clock.
+ This parameter can be a value of @ref USART_Clock_Polarity */
+
+ uint32_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made.
+ This parameter can be a value of @ref USART_Clock_Phase */
+
+ uint32_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted
+ data bit (MSB) has to be output on the SCLK pin in synchronous mode.
+ This parameter can be a value of @ref USART_Last_Bit */
+}USART_InitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_USART_STATE_RESET = 0x00, /*!< Peripheral is not initialized */
+ HAL_USART_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_USART_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_USART_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
+ HAL_USART_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
+ HAL_USART_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission Reception process is ongoing */
+ HAL_USART_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_USART_STATE_ERROR = 0x04 /*!< Error */
+}HAL_USART_StateTypeDef;
+
+/**
+ * @brief USART clock sources definitions
+ */
+typedef enum
+{
+ USART_CLOCKSOURCE_PCLK1 = 0x00, /*!< PCLK1 clock source */
+ USART_CLOCKSOURCE_HSI = 0x02, /*!< HSI clock source */
+ USART_CLOCKSOURCE_SYSCLK = 0x04, /*!< SYSCLK clock source */
+ USART_CLOCKSOURCE_LSE = 0x08, /*!< LSE clock source */
+ USART_CLOCKSOURCE_UNDEFINED = 0x10 /*!< undefined clock source */
+}USART_ClockSourceTypeDef;
+
+/**
+ * @brief USART handle Structure definition
+ */
+typedef struct
+{
+ USART_TypeDef *Instance; /*!< USART registers base address */
+
+ USART_InitTypeDef Init; /*!< USART communication parameters */
+
+ uint8_t *pTxBuffPtr; /*!< Pointer to USART Tx transfer Buffer */
+
+ uint16_t TxXferSize; /*!< USART Tx Transfer size */
+
+ uint16_t TxXferCount; /*!< USART Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /*!< Pointer to USART Rx transfer Buffer */
+
+ uint16_t RxXferSize; /*!< USART Rx Transfer size */
+
+ uint16_t RxXferCount; /*!< USART Rx Transfer Counter */
+
+ uint16_t Mask; /*!< USART Rx RDR register mask */
+
+ DMA_HandleTypeDef *hdmatx; /*!< USART Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< USART Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< Locking object */
+
+ HAL_USART_StateTypeDef State; /*!< USART communication state */
+
+ __IO uint32_t ErrorCode; /*!< USART Error code
+ This parameter can be a value of @ref USART_Error */
+
+}USART_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup USART_Exported_Constants USART Exported constants
+ * @{
+ */
+
+/** @defgroup USART_Error USART Error
+ * @{
+ */
+#define HAL_USART_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_USART_ERROR_PE ((uint32_t)0x00000001) /*!< Parity error */
+#define HAL_USART_ERROR_NE ((uint32_t)0x00000002) /*!< Noise error */
+#define HAL_USART_ERROR_FE ((uint32_t)0x00000004) /*!< frame error */
+#define HAL_USART_ERROR_ORE ((uint32_t)0x00000008) /*!< Overrun error */
+#define HAL_USART_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */
+/**
+ * @}
+ */
+
+/** @defgroup USART_Stop_Bits USART Number of Stop Bits
+ * @{
+ */
+#define USART_STOPBITS_1 ((uint32_t)0x0000)
+#define USART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1)
+#define USART_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1))
+#define IS_USART_STOPBITS(STOPBITS) (((STOPBITS) == USART_STOPBITS_1) || \
+ ((STOPBITS) == USART_STOPBITS_1_5) || \
+ ((STOPBITS) == USART_STOPBITS_2))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Parity USART Parity
+ * @{
+ */
+#define USART_PARITY_NONE ((uint32_t)0x0000)
+#define USART_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
+#define USART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
+#define IS_USART_PARITY(PARITY) (((PARITY) == USART_PARITY_NONE) || \
+ ((PARITY) == USART_PARITY_EVEN) || \
+ ((PARITY) == USART_PARITY_ODD))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Mode USART Mode
+ * @{
+ */
+#define USART_MODE_RX ((uint32_t)USART_CR1_RE)
+#define USART_MODE_TX ((uint32_t)USART_CR1_TE)
+#define USART_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
+#define IS_USART_MODE(MODE) ((((MODE) & (uint32_t)0xFFFFFFF3) == 0x00) && ((MODE) != (uint32_t)0x00))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Clock USART Clock
+ * @{
+ */
+#define USART_CLOCK_DISABLED ((uint32_t)0x0000)
+#define USART_CLOCK_ENABLED ((uint32_t)USART_CR2_CLKEN)
+#define IS_USART_CLOCK(CLOCK) (((CLOCK) == USART_CLOCK_DISABLED) || \
+ ((CLOCK) == USART_CLOCK_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Clock_Polarity USART Clock Polarity
+ * @{
+ */
+#define USART_POLARITY_LOW ((uint32_t)0x0000)
+#define USART_POLARITY_HIGH ((uint32_t)USART_CR2_CPOL)
+#define IS_USART_POLARITY(CPOL) (((CPOL) == USART_POLARITY_LOW) || ((CPOL) == USART_POLARITY_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Clock_Phase USART Clock Phase
+ * @{
+ */
+#define USART_PHASE_1EDGE ((uint32_t)0x0000)
+#define USART_PHASE_2EDGE ((uint32_t)USART_CR2_CPHA)
+#define IS_USART_PHASE(CPHA) (((CPHA) == USART_PHASE_1EDGE) || ((CPHA) == USART_PHASE_2EDGE))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Last_Bit USART Last Bit
+ * @{
+ */
+#define USART_LASTBIT_DISABLE ((uint32_t)0x0000)
+#define USART_LASTBIT_ENABLE ((uint32_t)USART_CR2_LBCL)
+#define IS_USART_LASTBIT(LASTBIT) (((LASTBIT) == USART_LASTBIT_DISABLE) || \
+ ((LASTBIT) == USART_LASTBIT_ENABLE))
+/**
+ * @}
+ */
+
+
+/** @defgroup USART_Flags USART Flags
+ * Elements values convention: 0xXXXX
+ * - 0xXXXX : Flag mask in the ISR register
+ * @{
+ */
+#define USART_FLAG_REACK ((uint32_t)0x00400000)
+#define USART_FLAG_TEACK ((uint32_t)0x00200000)
+#define USART_FLAG_BUSY ((uint32_t)0x00010000)
+#define USART_FLAG_CTS ((uint32_t)0x00000400)
+#define USART_FLAG_CTSIF ((uint32_t)0x00000200)
+#define USART_FLAG_LBDF ((uint32_t)0x00000100)
+#define USART_FLAG_TXE ((uint32_t)0x00000080)
+#define USART_FLAG_TC ((uint32_t)0x00000040)
+#define USART_FLAG_RXNE ((uint32_t)0x00000020)
+#define USART_FLAG_IDLE ((uint32_t)0x00000010)
+#define USART_FLAG_ORE ((uint32_t)0x00000008)
+#define USART_FLAG_NE ((uint32_t)0x00000004)
+#define USART_FLAG_FE ((uint32_t)0x00000002)
+#define USART_FLAG_PE ((uint32_t)0x00000001)
+/**
+ * @}
+ */
+
+/** @defgroup USART_Interrupt_definition USART Interrupts Definition
+ * Elements values convention: 0000ZZZZ0XXYYYYYb
+ * - YYYYY : Interrupt source position in the XX register (5bits)
+ * - XX : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR2 register
+ * - 11: CR3 register
+ * - ZZZZ : Flag position in the ISR register(4bits)
+ * @{
+ */
+
+#define USART_IT_PE ((uint16_t)0x0028)
+#define USART_IT_TXE ((uint16_t)0x0727)
+#define USART_IT_TC ((uint16_t)0x0626)
+#define USART_IT_RXNE ((uint16_t)0x0525)
+#define USART_IT_IDLE ((uint16_t)0x0424)
+#define USART_IT_ERR ((uint16_t)0x0060)
+
+#define USART_IT_ORE ((uint16_t)0x0300)
+#define USART_IT_NE ((uint16_t)0x0200)
+#define USART_IT_FE ((uint16_t)0x0100)
+/**
+ * @}
+ */
+
+/** @defgroup USART_IT_CLEAR_Flags USART Interruption Clear Flags
+ * @{
+ */
+#define USART_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */
+#define USART_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */
+#define USART_CLEAR_NEF USART_ICR_NCF /*!< Noise detected Clear Flag */
+#define USART_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */
+#define USART_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */
+#define USART_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */
+#define USART_CLEAR_CTSF USART_ICR_CTSCF /*!< CTS Interrupt Clear Flag */
+/**
+ * @}
+ */
+
+/** @defgroup USART_Request_Parameters USART Request Parameters
+ * @{
+ */
+#define USART_RXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_RXFRQ) /*!< Receive Data flush Request */
+#define USART_TXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_TXFRQ) /*!< Transmit data flush Request */
+#define IS_USART_REQUEST_PARAMETER(PARAM) (((PARAM) == USART_RXDATA_FLUSH_REQUEST) || \
+ ((PARAM) == USART_TXDATA_FLUSH_REQUEST))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Interruption_Mask USART interruptions flag mask
+ * @{
+ */
+#define USART_IT_MASK ((uint16_t)0x001F)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup USART_Exported_Macros USART Exported Macros
+ * @{
+ */
+
+
+/** @brief Reset USART handle state
+ * @param __HANDLE__: USART handle.
+ * @retval None
+ */
+#define __HAL_USART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_USART_STATE_RESET)
+
+/** @brief Checks whether the specified USART flag is set or not.
+ * @param __HANDLE__: specifies the USART Handle
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg USART_FLAG_REACK: Receive enable ackowledge flag
+ * @arg USART_FLAG_TEACK: Transmit enable ackowledge flag
+ * @arg USART_FLAG_BUSY: Busy flag
+ * @arg USART_FLAG_CTS: CTS Change flag
+ * @arg USART_FLAG_TXE: Transmit data register empty flag
+ * @arg USART_FLAG_TC: Transmission Complete flag
+ * @arg USART_FLAG_RXNE: Receive data register not empty flag
+ * @arg USART_FLAG_IDLE: Idle Line detection flag
+ * @arg USART_FLAG_ORE: OverRun Error flag
+ * @arg USART_FLAG_NE: Noise Error flag
+ * @arg USART_FLAG_FE: Framing Error flag
+ * @arg USART_FLAG_PE: Parity Error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_USART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))
+
+
+/** @brief Enables the specified USART interrupt.
+ * @param __HANDLE__: specifies the USART Handle
+ * @param __INTERRUPT__: specifies the USART interrupt source to enable.
+ * This parameter can be one of the following values:
+ * @arg USART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg USART_IT_TC: Transmission complete interrupt
+ * @arg USART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg USART_IT_IDLE: Idle line detection interrupt
+ * @arg USART_IT_PE: Parity Error interrupt
+ * @arg USART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_USART_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 |= (1U << ((__INTERRUPT__) & USART_IT_MASK))): \
+ ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 |= (1U << ((__INTERRUPT__) & USART_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 |= (1U << ((__INTERRUPT__) & USART_IT_MASK))))
+
+/** @brief Disables the specified USART interrupt.
+ * @param __HANDLE__: specifies the USART Handle.
+ * @param __INTERRUPT__: specifies the USART interrupt source to disable.
+ * This parameter can be one of the following values:
+ * @arg USART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg USART_IT_TC: Transmission complete interrupt
+ * @arg USART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg USART_IT_IDLE: Idle line detection interrupt
+ * @arg USART_IT_PE: Parity Error interrupt
+ * @arg USART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_USART_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & USART_IT_MASK))): \
+ ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & USART_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & USART_IT_MASK))))
+
+
+/** @brief Checks whether the specified USART interrupt has occurred or not.
+ * @param __HANDLE__: specifies the USART Handle
+ * @param __IT__: specifies the USART interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg USART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg USART_IT_TC: Transmission complete interrupt
+ * @arg USART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg USART_IT_IDLE: Idle line detection interrupt
+ * @arg USART_IT_ORE: OverRun Error interrupt
+ * @arg USART_IT_NE: Noise Error interrupt
+ * @arg USART_IT_FE: Framing Error interrupt
+ * @arg USART_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_USART_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & ((uint32_t)1 << ((__IT__)>> 0x08)))
+
+/** @brief Checks whether the specified USART interrupt source is enabled.
+ * @param __HANDLE__: specifies the USART Handle.
+ * @param __IT__: specifies the USART interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg USART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg USART_IT_TC: Transmission complete interrupt
+ * @arg USART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg USART_IT_IDLE: Idle line detection interrupt
+ * @arg USART_IT_ORE: OverRun Error interrupt
+ * @arg USART_IT_NE: Noise Error interrupt
+ * @arg USART_IT_FE: Framing Error interrupt
+ * @arg USART_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_USART_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((uint8_t)(__IT__)) >> 5) == 1)? (__HANDLE__)->Instance->CR1:(((((uint8_t)(__IT__)) >> 5) == 2)? \
+ (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & ((uint32_t)1 << \
+ (((uint16_t)(__IT__)) & USART_IT_MASK)))
+
+
+/** @brief Clears the specified USART ISR flag, in setting the proper ICR register flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * @param __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set
+ * to clear the corresponding interrupt
+ * This parameter can be one of the following values:
+ * @arg USART_CLEAR_PEF: Parity Error Clear Flag
+ * @arg USART_CLEAR_FEF: Framing Error Clear Flag
+ * @arg USART_CLEAR_NEF: Noise detected Clear Flag
+ * @arg USART_CLEAR_OREF: OverRun Error Clear Flag
+ * @arg USART_CLEAR_IDLEF: IDLE line detected Clear Flag
+ * @arg USART_CLEAR_TCF: Transmission Complete Clear Flag
+ * @arg USART_CLEAR_CTSF: CTS Interrupt Clear Flag
+ * @retval None
+ */
+#define __HAL_USART_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__))
+
+/** @brief Set a specific USART request flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * @param __REQ__: specifies the request flag to set
+ * This parameter can be one of the following values:
+ * @arg USART_RXDATA_FLUSH_REQUEST: Receive Data flush Request
+ * @arg USART_TXDATA_FLUSH_REQUEST: Transmit data flush Request
+ *
+ * @retval None
+ */
+#define __HAL_USART_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__))
+
+/** @brief Enable USART
+ * @param __HANDLE__: specifies the USART Handle.
+ * @retval None
+ */
+#define __HAL_USART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
+
+/** @brief Disable USART
+ * @param __HANDLE__: specifies the USART Handle.
+ * @retval None
+ */
+#define __HAL_USART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
+
+/**
+ * @}
+ */
+
+/* Private macros --------------------------------------------------------*/
+/** @defgroup USART_Private_Macros USART Private Macros
+ * @{
+ */
+
+/** @brief Check USART Baud rate
+ * @param BAUDRATE: Baudrate specified by the user
+ * The maximum Baud Rate is derived from the maximum clock on F0 (i.e. 48 MHz)
+ * divided by the smallest oversampling used on the USART (i.e. 8)
+ * @retval Test result (TRUE or FALSE)
+ */
+#define IS_USART_BAUDRATE(BAUDRATE) ((BAUDRATE) < 9000001)
+/**
+ * @}
+ */
+
+/* Include USART HAL Extension module */
+#include "stm32f0xx_hal_usart_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup USART_Exported_Functions USART Exported Functions
+ * @{
+ */
+
+/** @addtogroup USART_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions ******************************/
+HAL_StatusTypeDef HAL_USART_Init(USART_HandleTypeDef *husart);
+HAL_StatusTypeDef HAL_USART_DeInit(USART_HandleTypeDef *husart);
+void HAL_USART_MspInit(USART_HandleTypeDef *husart);
+void HAL_USART_MspDeInit(USART_HandleTypeDef *husart);
+HAL_StatusTypeDef HAL_USART_CheckIdleState(USART_HandleTypeDef *husart);
+
+/**
+ * @}
+ */
+
+/** @addtogroup USART_Exported_Functions_Group2 IO operation functions
+ * @{
+ */
+
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_USART_Receive(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_USART_Transmit_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_Receive_IT(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_Receive_DMA(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_TransmitReceive_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_DMAPause(USART_HandleTypeDef *husart);
+HAL_StatusTypeDef HAL_USART_DMAResume(USART_HandleTypeDef *husart);
+HAL_StatusTypeDef HAL_USART_DMAStop(USART_HandleTypeDef *husart);
+void HAL_USART_IRQHandler(USART_HandleTypeDef *husart);
+void HAL_USART_TxCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_RxCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_TxHalfCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_RxHalfCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_TxRxCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_ErrorCallback(USART_HandleTypeDef *husart);
+
+/**
+ * @}
+ */
+
+/* Peripheral Control functions ***********************************************/
+
+/** @addtogroup USART_Exported_Functions_Group3 Peripheral State and Errors functions
+ * @{
+ */
+
+/* Peripheral State and Error functions ***************************************/
+HAL_USART_StateTypeDef HAL_USART_GetState(USART_HandleTypeDef *husart);
+uint32_t HAL_USART_GetError(USART_HandleTypeDef *husart);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_USART_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/include/stm32f0xx_hal_usart_ex.h b/f0/include/stm32f0xx_hal_usart_ex.h
new file mode 100755
index 0000000000000000000000000000000000000000..b29a32b4fe75702545ff3098c1b5689ba640a928
--- /dev/null
+++ b/f0/include/stm32f0xx_hal_usart_ex.h
@@ -0,0 +1,503 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_usart_ex.h
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief Header file of USART HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_USART_EX_H
+#define __STM32F0xx_HAL_USART_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup USARTEx USARTEx Extended HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup USARTEx_Exported_Constants USARTEx Exported Constants
+ * @{
+ */
+
+/** @defgroup USARTEx_Word_Length USARTEx Word Length
+ * @{
+ */
+#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC)
+#define USART_WORDLENGTH_7B ((uint32_t)USART_CR1_M1)
+#define USART_WORDLENGTH_8B ((uint32_t)0x00000000)
+#define USART_WORDLENGTH_9B ((uint32_t)USART_CR1_M0)
+#define IS_USART_WORD_LENGTH(LENGTH) (((LENGTH) == USART_WORDLENGTH_7B) || \
+ ((LENGTH) == USART_WORDLENGTH_8B) || \
+ ((LENGTH) == USART_WORDLENGTH_9B))
+#else
+#define USART_WORDLENGTH_8B ((uint32_t)0x00000000)
+#define USART_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
+#define IS_USART_WORD_LENGTH(LENGTH) (((LENGTH) == USART_WORDLENGTH_8B) || \
+ ((LENGTH) == USART_WORDLENGTH_9B))
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || defined (STM32F070xB) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup USARTEx_Exported_Macros USARTEx Exported Macros
+ * @{
+ */
+
+/** @brief Reports the USART clock source.
+ * @param __HANDLE__: specifies the USART Handle
+ * @param __CLOCKSOURCE__ : output variable
+ * @retval the USART clocking source, written in __CLOCKSOURCE__.
+ */
+#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx)
+#define __HAL_USART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } while(0)
+#elif defined (STM32F030x8) || defined (STM32F070x6) || \
+ defined (STM32F042x6) || defined (STM32F048xx) || \
+ defined (STM32F051x8) || defined (STM32F058xx)
+#define __HAL_USART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+#elif defined (STM32F070xB)
+#define __HAL_USART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+#elif defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)
+#define __HAL_USART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+#elif defined(STM32F091xC) || defined (STM32F098xx)
+#define __HAL_USART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ switch(__HAL_RCC_GET_USART3_SOURCE()) \
+ { \
+ case RCC_USART3CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART3CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART3CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART3CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART5) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART6) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART7) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART8) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+#elif defined(STM32F030xC)
+#define __HAL_USART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART5) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART6) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+#endif /* defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) */
+
+
+/** @brief Reports the USART mask to apply to retrieve the received data
+ * according to the word length and to the parity bits activation.
+ * If PCE = 1, the parity bit is not included in the data extracted
+ * by the reception API().
+ * This masking operation is not carried out in the case of
+ * DMA transfers.
+ * @param __HANDLE__: specifies the USART Handle
+ * @retval none
+ */
+#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC)
+#define __HAL_USART_MASK_COMPUTATION(__HANDLE__) \
+ do { \
+ if ((__HANDLE__)->Init.WordLength == USART_WORDLENGTH_9B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == USART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x01FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == USART_WORDLENGTH_8B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == USART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x007F ; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == USART_WORDLENGTH_7B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == USART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x007F ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x003F ; \
+ } \
+ } \
+} while(0)
+#else
+#define __HAL_USART_MASK_COMPUTATION(__HANDLE__) \
+ do { \
+ if ((__HANDLE__)->Init.WordLength == USART_WORDLENGTH_9B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == USART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x01FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == USART_WORDLENGTH_8B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == USART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x007F ; \
+ } \
+ } \
+} while(0)
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/* Initialization and de-initialization functions ****************************/
+/* I/O operation functions ***************************************************/
+/* Peripheral Control functions **********************************************/
+/* Peripheral State functions ************************************************/
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_USART_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/include/stm32f0xx_hal_wwdg.h b/f0/include/stm32f0xx_hal_wwdg.h
new file mode 100755
index 0000000000000000000000000000000000000000..f9700abc1f896708022ddfe79f5628d5dd340ec1
--- /dev/null
+++ b/f0/include/stm32f0xx_hal_wwdg.h
@@ -0,0 +1,334 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_wwdg.h
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief Header file of WWDG HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_WWDG_H
+#define __STM32F0xx_HAL_WWDG_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup WWDG
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup WWDG_Exported_Types WWDG Exported Types
+ * @{
+ */
+
+/**
+ * @brief WWDG HAL State Structure definition
+ */
+typedef enum
+{
+ HAL_WWDG_STATE_RESET = 0x00, /*!< WWDG not yet initialized or disabled */
+ HAL_WWDG_STATE_READY = 0x01, /*!< WWDG initialized and ready for use */
+ HAL_WWDG_STATE_BUSY = 0x02, /*!< WWDG internal process is ongoing */
+ HAL_WWDG_STATE_TIMEOUT = 0x03, /*!< WWDG timeout state */
+ HAL_WWDG_STATE_ERROR = 0x04 /*!< WWDG error state */
+}HAL_WWDG_StateTypeDef;
+
+/**
+ * @brief WWDG Init structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Specifies the prescaler value of the WWDG.
+ This parameter can be a value of @ref WWDG_Prescaler */
+
+ uint32_t Window; /*!< Specifies the WWDG window value to be compared to the downcounter.
+ This parameter must be a number lower than Max_Data = 0x80 */
+
+ uint32_t Counter; /*!< Specifies the WWDG free-running downcounter value.
+ This parameter must be a number between Min_Data = 0x40 and Max_Data = 0x7F */
+
+} WWDG_InitTypeDef;
+
+/**
+ * @brief WWDG handle Structure definition
+ */
+typedef struct
+{
+ WWDG_TypeDef *Instance; /*!< Register base address */
+
+ WWDG_InitTypeDef Init; /*!< WWDG required parameters */
+
+ HAL_LockTypeDef Lock; /*!< WWDG locking object */
+
+ __IO HAL_WWDG_StateTypeDef State; /*!< WWDG communication state */
+
+} WWDG_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup WWDG_Exported_Constants WWDG Exported Constants
+ * @{
+ */
+
+/** @defgroup WWDG_Interrupt_definition WWDG Interrupt definition
+ * @{
+ */
+#define WWDG_IT_EWI WWDG_CFR_EWI /*!< Early wakeup interrupt */
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Flag_definition WWDG Flag definition
+ * @brief WWDG Flag definition
+ * @{
+ */
+#define WWDG_FLAG_EWIF WWDG_SR_EWIF /*!< Early wakeup interrupt flag */
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Prescaler WWDG Prescaler
+ * @{
+ */
+#define WWDG_PRESCALER_1 ((uint32_t)0x00000000) /*!< WWDG counter clock = (PCLK1/4096)/1 */
+#define WWDG_PRESCALER_2 WWDG_CFR_WDGTB0 /*!< WWDG counter clock = (PCLK1/4096)/2 */
+#define WWDG_PRESCALER_4 WWDG_CFR_WDGTB1 /*!< WWDG counter clock = (PCLK1/4096)/4 */
+#define WWDG_PRESCALER_8 WWDG_CFR_WDGTB /*!< WWDG counter clock = (PCLK1/4096)/8 */
+
+#define IS_WWDG_PRESCALER(__PRESCALER__) (((__PRESCALER__) == WWDG_PRESCALER_1) || \
+ ((__PRESCALER__) == WWDG_PRESCALER_2) || \
+ ((__PRESCALER__) == WWDG_PRESCALER_4) || \
+ ((__PRESCALER__) == WWDG_PRESCALER_8))
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Window WWDG Window
+ * @{
+ */
+#define IS_WWDG_WINDOW(__WINDOW__) ((__WINDOW__) <= 0x7F)
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Counter WWDG Counter
+ * @{
+ */
+#define IS_WWDG_COUNTER(__COUNTER__) (((__COUNTER__) >= 0x40) && ((__COUNTER__) <= 0x7F))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup WWDG_Exported_Macros WWDG Exported Macros
+ * @{
+ */
+
+/** @brief Reset WWDG handle state
+ * @param __HANDLE__: WWDG handle
+ * @retval None
+ */
+#define __HAL_WWDG_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_WWDG_STATE_RESET)
+
+/**
+ * @brief Enables the WWDG peripheral.
+ * @param __HANDLE__: WWDG handle
+ * @retval None
+ */
+#define __HAL_WWDG_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= WWDG_CR_WDGA)
+
+/**
+ * @brief Disables the WWDG peripheral.
+ * @param __HANDLE__: WWDG handle
+ * @note WARNING: This is a dummy macro for HAL code alignment.
+ * Once enable, WWDG Peripheral cannot be disabled except by a system reset.
+ * @retval None
+ */
+#define __HAL_WWDG_DISABLE(__HANDLE__) /* dummy macro */
+
+/**
+ * @brief Enables the WWDG early wakeup interrupt.
+ * @param __HANDLE__: WWDG handle
+ * @param __INTERRUPT__: specifies the interrupt to enable.
+ * This parameter can be one of the following values:
+ * @arg WWDG_IT_EWI: Early wakeup interrupt
+ * @note Once enabled this interrupt cannot be disabled except by a system reset.
+ * @retval None
+ */
+#define __HAL_WWDG_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CFR |= (__INTERRUPT__))
+
+/**
+ * @brief Disables the WWDG early wakeup interrupt.
+ * @param __HANDLE__: WWDG handle
+ * @param __INTERRUPT__: specifies the interrupt to disable.
+ * This parameter can be one of the following values:
+ * @arg WWDG_IT_EWI: Early wakeup interrupt
+ * @note WARNING: This is a dummy macro for HAL code alignment.
+ * Once enabled this interrupt cannot be disabled except by a system reset.
+ * @retval None
+ */
+#define __HAL_WWDG_DISABLE_IT(__HANDLE__, __INTERRUPT__) /* dummy macro */
+
+/**
+ * @brief Gets the selected WWDG's it status.
+ * @param __HANDLE__: WWDG handle
+ * @param __INTERRUPT__: specifies the it to check.
+ * This parameter can be one of the following values:
+ * @arg WWDG_FLAG_EWIF: Early wakeup interrupt IT
+ * @retval The new state of WWDG_FLAG (SET or RESET).
+ */
+#define __HAL_WWDG_GET_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->SR & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/** @brief Clear the WWDG's interrupt pending bits
+ * bits to clear the selected interrupt pending bits.
+ * @param __HANDLE__: WWDG handle
+ * @param __INTERRUPT__: specifies the interrupt pending bit to clear.
+ * This parameter can be one of the following values:
+ * @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag
+ */
+#define __HAL_WWDG_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__))
+
+/**
+ * @brief Gets the selected WWDG's flag status.
+ * @param __HANDLE__: WWDG handle
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag
+ * @retval The new state of WWDG_FLAG (SET or RESET).
+ */
+#define __HAL_WWDG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clears the WWDG's pending flags.
+ * @param __HANDLE__: WWDG handle
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be one of the following values:
+ * @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag
+ * @retval None
+ */
+#define __HAL_WWDG_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
+
+/** @brief Checks if the specified WWDG interrupt source is enabled or disabled.
+ * @param __HANDLE__: WWDG Handle.
+ * @param __INTERRUPT__: specifies the WWDG interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg WWDG_IT_EWI: Early Wakeup Interrupt
+ * @retval state of __INTERRUPT__ (TRUE or FALSE).
+ */
+#define __HAL_WWDG_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CFR & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup WWDG_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup WWDG_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_WWDG_Init(WWDG_HandleTypeDef *hwwdg);
+HAL_StatusTypeDef HAL_WWDG_DeInit(WWDG_HandleTypeDef *hwwdg);
+void HAL_WWDG_MspInit(WWDG_HandleTypeDef *hwwdg);
+void HAL_WWDG_MspDeInit(WWDG_HandleTypeDef *hwwdg);
+void HAL_WWDG_WakeupCallback(WWDG_HandleTypeDef* hwwdg);
+
+/**
+ * @}
+ */
+
+/** @addtogroup WWDG_Exported_Functions_Group2
+ * @{
+ */
+/* I/O operation functions ******************************************************/
+HAL_StatusTypeDef HAL_WWDG_Start(WWDG_HandleTypeDef *hwwdg);
+HAL_StatusTypeDef HAL_WWDG_Start_IT(WWDG_HandleTypeDef *hwwdg);
+HAL_StatusTypeDef HAL_WWDG_Refresh(WWDG_HandleTypeDef *hwwdg, uint32_t Counter);
+void HAL_WWDG_IRQHandler(WWDG_HandleTypeDef *hwwdg);
+
+/**
+ * @}
+ */
+
+/** @addtogroup WWDG_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral State functions **************************************************/
+HAL_WWDG_StateTypeDef HAL_WWDG_GetState(WWDG_HandleTypeDef *hwwdg);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_WWDG_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/linker_scripts/STMF0_128FLASH_16RAM.ld b/f0/linker_scripts/STMF0_128FLASH_16RAM.ld
new file mode 100644
index 0000000000000000000000000000000000000000..132cd65dc962113c777b20980e59c88beb028694
--- /dev/null
+++ b/f0/linker_scripts/STMF0_128FLASH_16RAM.ld
@@ -0,0 +1,165 @@
+/*
+*****************************************************************************
+**
+** File : stm32_flash.ld
+**
+** Abstract : Linker script for STM32F4 Devices with 1024KByte FLASH
+** and 192KByte RAM
+**
+** Set heap size, stack size and stack location according
+** to application requirements.
+**
+** Set memory bank area and size if external memory is used.
+**
+** Target : STMicroelectronics STM32
+**
+** Environment : GNU compiler
+**
+** Distribution: The file is distributed “as is,” without any warranty
+** of any kind.
+**
+** (c)Copyright Atollic AB.
+** You may use this file as-is or modify it according to the needs of your
+** project. This file may only be built (assembled or compiled and linked)
+** using the Atollic TrueSTUDIO(R) product. The use of this file together
+** with other tools than Atollic TrueSTUDIO(R) is not permitted.
+**
+*****************************************************************************
+*/
+
+/* Entry Point */
+ENTRY(Reset_Handler)
+
+/* Highest address of the user mode stack */
+_estack = 0x20003FFF; /* end of RAM */
+
+/* Generate a link error if heap and stack don't fit into RAM */
+_Min_Heap_Size = 0; /* required amount of heap */
+_Min_Stack_Size = 0x400; /* required amount of stack */
+
+/* Specify the memory areas */
+MEMORY
+{
+FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 128K
+RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 16K
+}
+
+/* Define output sections */
+SECTIONS
+{
+ /* The startup code goes first into FLASH */
+ .isr_vector :
+ {
+ . = ALIGN(4);
+ KEEP(*(.isr_vector)) /* Startup code */
+ . = ALIGN(4);
+ } >FLASH
+
+ /* The program code and other data goes into FLASH */
+ .text :
+ {
+ . = ALIGN(4);
+ *(.text) /* .text sections (code) */
+ *(.text*) /* .text* sections (code) */
+ *(.glue_7) /* glue arm to thumb code */
+ *(.glue_7t) /* glue thumb to arm code */
+ *(.eh_frame)
+
+ KEEP (*(.init))
+ KEEP (*(.fini))
+
+ . = ALIGN(4);
+ _etext = .; /* define a global symbols at end of code */
+ } >FLASH
+
+ /* Constant data goes into FLASH */
+ .rodata :
+ {
+ . = ALIGN(4);
+ *(.rodata) /* .rodata sections (constants, strings, etc.) */
+ *(.rodata*) /* .rodata* sections (constants, strings, etc.) */
+ . = ALIGN(4);
+ } >FLASH
+
+ .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
+ .ARM : {
+ __exidx_start = .;
+ *(.ARM.exidx*)
+ __exidx_end = .;
+ } >FLASH
+
+ .preinit_array :
+ {
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP (*(.preinit_array*))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+ } >FLASH
+ .init_array :
+ {
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP (*(SORT(.init_array.*)))
+ KEEP (*(.init_array*))
+ PROVIDE_HIDDEN (__init_array_end = .);
+ } >FLASH
+ .fini_array :
+ {
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP (*(SORT(.fini_array.*)))
+ KEEP (*(.fini_array*))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+ } >FLASH
+
+ /* used by the startup to initialize data */
+ _sidata = LOADADDR(.data);
+
+ /* Initialized data sections goes into RAM, load LMA copy after code */
+ .data :
+ {
+ . = ALIGN(4);
+ _sdata = .; /* create a global symbol at data start */
+ *(.data) /* .data sections */
+ *(.data*) /* .data* sections */
+
+ . = ALIGN(4);
+ _edata = .; /* define a global symbol at data end */
+ } >RAM AT> FLASH
+
+ /* Uninitialized data section */
+ . = ALIGN(4);
+ .bss :
+ {
+ /* This is used by the startup in order to initialize the .bss secion */
+ _sbss = .; /* define a global symbol at bss start */
+ __bss_start__ = _sbss;
+ *(.bss)
+ *(.bss*)
+ *(COMMON)
+
+ . = ALIGN(4);
+ _ebss = .; /* define a global symbol at bss end */
+ __bss_end__ = _ebss;
+ } >RAM
+
+ /* User_heap_stack section, used to check that there is enough RAM left */
+ ._user_heap_stack :
+ {
+ . = ALIGN(4);
+ PROVIDE ( end = . );
+ PROVIDE ( _end = . );
+ . = . + _Min_Heap_Size;
+ . = . + _Min_Stack_Size;
+ . = ALIGN(4);
+ } >RAM
+
+
+
+ /* Remove information from the standard libraries */
+ /DISCARD/ :
+ {
+ libc.a ( * )
+ libm.a ( * )
+ libgcc.a ( * )
+ }
+
+ .ARM.attributes 0 : { *(.ARM.attributes) }
+}
diff --git a/f0/linker_scripts/STMF0_128FLASH_32RAM.ld b/f0/linker_scripts/STMF0_128FLASH_32RAM.ld
new file mode 100644
index 0000000000000000000000000000000000000000..b7e8cf660c8a3a6fabc7227a491cab6977b85f92
--- /dev/null
+++ b/f0/linker_scripts/STMF0_128FLASH_32RAM.ld
@@ -0,0 +1,165 @@
+/*
+*****************************************************************************
+**
+** File : stm32_flash.ld
+**
+** Abstract : Linker script for STM32F4 Devices with 1024KByte FLASH
+** and 192KByte RAM
+**
+** Set heap size, stack size and stack location according
+** to application requirements.
+**
+** Set memory bank area and size if external memory is used.
+**
+** Target : STMicroelectronics STM32
+**
+** Environment : GNU compiler
+**
+** Distribution: The file is distributed “as is,” without any warranty
+** of any kind.
+**
+** (c)Copyright Atollic AB.
+** You may use this file as-is or modify it according to the needs of your
+** project. This file may only be built (assembled or compiled and linked)
+** using the Atollic TrueSTUDIO(R) product. The use of this file together
+** with other tools than Atollic TrueSTUDIO(R) is not permitted.
+**
+*****************************************************************************
+*/
+
+/* Entry Point */
+ENTRY(Reset_Handler)
+
+/* Highest address of the user mode stack */
+_estack = 0x20007FFF; /* end of RAM */
+
+/* Generate a link error if heap and stack don't fit into RAM */
+_Min_Heap_Size = 0; /* required amount of heap */
+_Min_Stack_Size = 0x400; /* required amount of stack */
+
+/* Specify the memory areas */
+MEMORY
+{
+FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 128K
+RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 32K
+}
+
+/* Define output sections */
+SECTIONS
+{
+ /* The startup code goes first into FLASH */
+ .isr_vector :
+ {
+ . = ALIGN(4);
+ KEEP(*(.isr_vector)) /* Startup code */
+ . = ALIGN(4);
+ } >FLASH
+
+ /* The program code and other data goes into FLASH */
+ .text :
+ {
+ . = ALIGN(4);
+ *(.text) /* .text sections (code) */
+ *(.text*) /* .text* sections (code) */
+ *(.glue_7) /* glue arm to thumb code */
+ *(.glue_7t) /* glue thumb to arm code */
+ *(.eh_frame)
+
+ KEEP (*(.init))
+ KEEP (*(.fini))
+
+ . = ALIGN(4);
+ _etext = .; /* define a global symbols at end of code */
+ } >FLASH
+
+ /* Constant data goes into FLASH */
+ .rodata :
+ {
+ . = ALIGN(4);
+ *(.rodata) /* .rodata sections (constants, strings, etc.) */
+ *(.rodata*) /* .rodata* sections (constants, strings, etc.) */
+ . = ALIGN(4);
+ } >FLASH
+
+ .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
+ .ARM : {
+ __exidx_start = .;
+ *(.ARM.exidx*)
+ __exidx_end = .;
+ } >FLASH
+
+ .preinit_array :
+ {
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP (*(.preinit_array*))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+ } >FLASH
+ .init_array :
+ {
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP (*(SORT(.init_array.*)))
+ KEEP (*(.init_array*))
+ PROVIDE_HIDDEN (__init_array_end = .);
+ } >FLASH
+ .fini_array :
+ {
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP (*(SORT(.fini_array.*)))
+ KEEP (*(.fini_array*))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+ } >FLASH
+
+ /* used by the startup to initialize data */
+ _sidata = LOADADDR(.data);
+
+ /* Initialized data sections goes into RAM, load LMA copy after code */
+ .data :
+ {
+ . = ALIGN(4);
+ _sdata = .; /* create a global symbol at data start */
+ *(.data) /* .data sections */
+ *(.data*) /* .data* sections */
+
+ . = ALIGN(4);
+ _edata = .; /* define a global symbol at data end */
+ } >RAM AT> FLASH
+
+ /* Uninitialized data section */
+ . = ALIGN(4);
+ .bss :
+ {
+ /* This is used by the startup in order to initialize the .bss secion */
+ _sbss = .; /* define a global symbol at bss start */
+ __bss_start__ = _sbss;
+ *(.bss)
+ *(.bss*)
+ *(COMMON)
+
+ . = ALIGN(4);
+ _ebss = .; /* define a global symbol at bss end */
+ __bss_end__ = _ebss;
+ } >RAM
+
+ /* User_heap_stack section, used to check that there is enough RAM left */
+ ._user_heap_stack :
+ {
+ . = ALIGN(4);
+ PROVIDE ( end = . );
+ PROVIDE ( _end = . );
+ . = . + _Min_Heap_Size;
+ . = . + _Min_Stack_Size;
+ . = ALIGN(4);
+ } >RAM
+
+
+
+ /* Remove information from the standard libraries */
+ /DISCARD/ :
+ {
+ libc.a ( * )
+ libm.a ( * )
+ libgcc.a ( * )
+ }
+
+ .ARM.attributes 0 : { *(.ARM.attributes) }
+}
diff --git a/f0/linker_scripts/STMF0_16FLASH_4RAM.ld b/f0/linker_scripts/STMF0_16FLASH_4RAM.ld
new file mode 100644
index 0000000000000000000000000000000000000000..5bae64089f08db6d4e86eb44eb5e352c969a8106
--- /dev/null
+++ b/f0/linker_scripts/STMF0_16FLASH_4RAM.ld
@@ -0,0 +1,165 @@
+/*
+*****************************************************************************
+**
+** File : stm32_flash.ld
+**
+** Abstract : Linker script for STM32F4 Devices with 1024KByte FLASH
+** and 192KByte RAM
+**
+** Set heap size, stack size and stack location according
+** to application requirements.
+**
+** Set memory bank area and size if external memory is used.
+**
+** Target : STMicroelectronics STM32
+**
+** Environment : GNU compiler
+**
+** Distribution: The file is distributed “as is,” without any warranty
+** of any kind.
+**
+** (c)Copyright Atollic AB.
+** You may use this file as-is or modify it according to the needs of your
+** project. This file may only be built (assembled or compiled and linked)
+** using the Atollic TrueSTUDIO(R) product. The use of this file together
+** with other tools than Atollic TrueSTUDIO(R) is not permitted.
+**
+*****************************************************************************
+*/
+
+/* Entry Point */
+ENTRY(Reset_Handler)
+
+/* Highest address of the user mode stack */
+_estack = 0x20000FFF; /* end of RAM */
+
+/* Generate a link error if heap and stack don't fit into RAM */
+_Min_Heap_Size = 0; /* required amount of heap */
+_Min_Stack_Size = 0x400; /* required amount of stack */
+
+/* Specify the memory areas */
+MEMORY
+{
+FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 16K
+RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 4K
+}
+
+/* Define output sections */
+SECTIONS
+{
+ /* The startup code goes first into FLASH */
+ .isr_vector :
+ {
+ . = ALIGN(4);
+ KEEP(*(.isr_vector)) /* Startup code */
+ . = ALIGN(4);
+ } >FLASH
+
+ /* The program code and other data goes into FLASH */
+ .text :
+ {
+ . = ALIGN(4);
+ *(.text) /* .text sections (code) */
+ *(.text*) /* .text* sections (code) */
+ *(.glue_7) /* glue arm to thumb code */
+ *(.glue_7t) /* glue thumb to arm code */
+ *(.eh_frame)
+
+ KEEP (*(.init))
+ KEEP (*(.fini))
+
+ . = ALIGN(4);
+ _etext = .; /* define a global symbols at end of code */
+ } >FLASH
+
+ /* Constant data goes into FLASH */
+ .rodata :
+ {
+ . = ALIGN(4);
+ *(.rodata) /* .rodata sections (constants, strings, etc.) */
+ *(.rodata*) /* .rodata* sections (constants, strings, etc.) */
+ . = ALIGN(4);
+ } >FLASH
+
+ .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
+ .ARM : {
+ __exidx_start = .;
+ *(.ARM.exidx*)
+ __exidx_end = .;
+ } >FLASH
+
+ .preinit_array :
+ {
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP (*(.preinit_array*))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+ } >FLASH
+ .init_array :
+ {
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP (*(SORT(.init_array.*)))
+ KEEP (*(.init_array*))
+ PROVIDE_HIDDEN (__init_array_end = .);
+ } >FLASH
+ .fini_array :
+ {
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP (*(SORT(.fini_array.*)))
+ KEEP (*(.fini_array*))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+ } >FLASH
+
+ /* used by the startup to initialize data */
+ _sidata = LOADADDR(.data);
+
+ /* Initialized data sections goes into RAM, load LMA copy after code */
+ .data :
+ {
+ . = ALIGN(4);
+ _sdata = .; /* create a global symbol at data start */
+ *(.data) /* .data sections */
+ *(.data*) /* .data* sections */
+
+ . = ALIGN(4);
+ _edata = .; /* define a global symbol at data end */
+ } >RAM AT> FLASH
+
+ /* Uninitialized data section */
+ . = ALIGN(4);
+ .bss :
+ {
+ /* This is used by the startup in order to initialize the .bss secion */
+ _sbss = .; /* define a global symbol at bss start */
+ __bss_start__ = _sbss;
+ *(.bss)
+ *(.bss*)
+ *(COMMON)
+
+ . = ALIGN(4);
+ _ebss = .; /* define a global symbol at bss end */
+ __bss_end__ = _ebss;
+ } >RAM
+
+ /* User_heap_stack section, used to check that there is enough RAM left */
+ ._user_heap_stack :
+ {
+ . = ALIGN(4);
+ PROVIDE ( end = . );
+ PROVIDE ( _end = . );
+ . = . + _Min_Heap_Size;
+ . = . + _Min_Stack_Size;
+ . = ALIGN(4);
+ } >RAM
+
+
+
+ /* Remove information from the standard libraries */
+ /DISCARD/ :
+ {
+ libc.a ( * )
+ libm.a ( * )
+ libgcc.a ( * )
+ }
+
+ .ARM.attributes 0 : { *(.ARM.attributes) }
+}
diff --git a/f0/linker_scripts/STMF0_16FLASH_6RAM.ld b/f0/linker_scripts/STMF0_16FLASH_6RAM.ld
new file mode 100644
index 0000000000000000000000000000000000000000..9e7b80149d04b168080563e829b8616902f57eca
--- /dev/null
+++ b/f0/linker_scripts/STMF0_16FLASH_6RAM.ld
@@ -0,0 +1,165 @@
+/*
+*****************************************************************************
+**
+** File : stm32_flash.ld
+**
+** Abstract : Linker script for STM32F4 Devices with 1024KByte FLASH
+** and 192KByte RAM
+**
+** Set heap size, stack size and stack location according
+** to application requirements.
+**
+** Set memory bank area and size if external memory is used.
+**
+** Target : STMicroelectronics STM32
+**
+** Environment : GNU compiler
+**
+** Distribution: The file is distributed “as is,” without any warranty
+** of any kind.
+**
+** (c)Copyright Atollic AB.
+** You may use this file as-is or modify it according to the needs of your
+** project. This file may only be built (assembled or compiled and linked)
+** using the Atollic TrueSTUDIO(R) product. The use of this file together
+** with other tools than Atollic TrueSTUDIO(R) is not permitted.
+**
+*****************************************************************************
+*/
+
+/* Entry Point */
+ENTRY(Reset_Handler)
+
+/* Highest address of the user mode stack */
+_estack = 0x200017FF; /* end of RAM */
+
+/* Generate a link error if heap and stack don't fit into RAM */
+_Min_Heap_Size = 0; /* required amount of heap */
+_Min_Stack_Size = 0x400; /* required amount of stack */
+
+/* Specify the memory areas */
+MEMORY
+{
+FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 16K
+RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 6K
+}
+
+/* Define output sections */
+SECTIONS
+{
+ /* The startup code goes first into FLASH */
+ .isr_vector :
+ {
+ . = ALIGN(4);
+ KEEP(*(.isr_vector)) /* Startup code */
+ . = ALIGN(4);
+ } >FLASH
+
+ /* The program code and other data goes into FLASH */
+ .text :
+ {
+ . = ALIGN(4);
+ *(.text) /* .text sections (code) */
+ *(.text*) /* .text* sections (code) */
+ *(.glue_7) /* glue arm to thumb code */
+ *(.glue_7t) /* glue thumb to arm code */
+ *(.eh_frame)
+
+ KEEP (*(.init))
+ KEEP (*(.fini))
+
+ . = ALIGN(4);
+ _etext = .; /* define a global symbols at end of code */
+ } >FLASH
+
+ /* Constant data goes into FLASH */
+ .rodata :
+ {
+ . = ALIGN(4);
+ *(.rodata) /* .rodata sections (constants, strings, etc.) */
+ *(.rodata*) /* .rodata* sections (constants, strings, etc.) */
+ . = ALIGN(4);
+ } >FLASH
+
+ .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
+ .ARM : {
+ __exidx_start = .;
+ *(.ARM.exidx*)
+ __exidx_end = .;
+ } >FLASH
+
+ .preinit_array :
+ {
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP (*(.preinit_array*))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+ } >FLASH
+ .init_array :
+ {
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP (*(SORT(.init_array.*)))
+ KEEP (*(.init_array*))
+ PROVIDE_HIDDEN (__init_array_end = .);
+ } >FLASH
+ .fini_array :
+ {
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP (*(SORT(.fini_array.*)))
+ KEEP (*(.fini_array*))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+ } >FLASH
+
+ /* used by the startup to initialize data */
+ _sidata = LOADADDR(.data);
+
+ /* Initialized data sections goes into RAM, load LMA copy after code */
+ .data :
+ {
+ . = ALIGN(4);
+ _sdata = .; /* create a global symbol at data start */
+ *(.data) /* .data sections */
+ *(.data*) /* .data* sections */
+
+ . = ALIGN(4);
+ _edata = .; /* define a global symbol at data end */
+ } >RAM AT> FLASH
+
+ /* Uninitialized data section */
+ . = ALIGN(4);
+ .bss :
+ {
+ /* This is used by the startup in order to initialize the .bss secion */
+ _sbss = .; /* define a global symbol at bss start */
+ __bss_start__ = _sbss;
+ *(.bss)
+ *(.bss*)
+ *(COMMON)
+
+ . = ALIGN(4);
+ _ebss = .; /* define a global symbol at bss end */
+ __bss_end__ = _ebss;
+ } >RAM
+
+ /* User_heap_stack section, used to check that there is enough RAM left */
+ ._user_heap_stack :
+ {
+ . = ALIGN(4);
+ PROVIDE ( end = . );
+ PROVIDE ( _end = . );
+ . = . + _Min_Heap_Size;
+ . = . + _Min_Stack_Size;
+ . = ALIGN(4);
+ } >RAM
+
+
+
+ /* Remove information from the standard libraries */
+ /DISCARD/ :
+ {
+ libc.a ( * )
+ libm.a ( * )
+ libgcc.a ( * )
+ }
+
+ .ARM.attributes 0 : { *(.ARM.attributes) }
+}
diff --git a/f0/linker_scripts/STMF0_16FLASH_8RAM.ld b/f0/linker_scripts/STMF0_16FLASH_8RAM.ld
new file mode 100644
index 0000000000000000000000000000000000000000..f563cf2515742b80fa03926ce08b1a8bb1066da1
--- /dev/null
+++ b/f0/linker_scripts/STMF0_16FLASH_8RAM.ld
@@ -0,0 +1,165 @@
+/*
+*****************************************************************************
+**
+** File : stm32_flash.ld
+**
+** Abstract : Linker script for STM32F4 Devices with 1024KByte FLASH
+** and 192KByte RAM
+**
+** Set heap size, stack size and stack location according
+** to application requirements.
+**
+** Set memory bank area and size if external memory is used.
+**
+** Target : STMicroelectronics STM32
+**
+** Environment : GNU compiler
+**
+** Distribution: The file is distributed “as is,” without any warranty
+** of any kind.
+**
+** (c)Copyright Atollic AB.
+** You may use this file as-is or modify it according to the needs of your
+** project. This file may only be built (assembled or compiled and linked)
+** using the Atollic TrueSTUDIO(R) product. The use of this file together
+** with other tools than Atollic TrueSTUDIO(R) is not permitted.
+**
+*****************************************************************************
+*/
+
+/* Entry Point */
+ENTRY(Reset_Handler)
+
+/* Highest address of the user mode stack */
+_estack = 0x20001FFF; /* end of RAM */
+
+/* Generate a link error if heap and stack don't fit into RAM */
+_Min_Heap_Size = 0; /* required amount of heap */
+_Min_Stack_Size = 0x400; /* required amount of stack */
+
+/* Specify the memory areas */
+MEMORY
+{
+FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 16K
+RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 8K
+}
+
+/* Define output sections */
+SECTIONS
+{
+ /* The startup code goes first into FLASH */
+ .isr_vector :
+ {
+ . = ALIGN(4);
+ KEEP(*(.isr_vector)) /* Startup code */
+ . = ALIGN(4);
+ } >FLASH
+
+ /* The program code and other data goes into FLASH */
+ .text :
+ {
+ . = ALIGN(4);
+ *(.text) /* .text sections (code) */
+ *(.text*) /* .text* sections (code) */
+ *(.glue_7) /* glue arm to thumb code */
+ *(.glue_7t) /* glue thumb to arm code */
+ *(.eh_frame)
+
+ KEEP (*(.init))
+ KEEP (*(.fini))
+
+ . = ALIGN(4);
+ _etext = .; /* define a global symbols at end of code */
+ } >FLASH
+
+ /* Constant data goes into FLASH */
+ .rodata :
+ {
+ . = ALIGN(4);
+ *(.rodata) /* .rodata sections (constants, strings, etc.) */
+ *(.rodata*) /* .rodata* sections (constants, strings, etc.) */
+ . = ALIGN(4);
+ } >FLASH
+
+ .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
+ .ARM : {
+ __exidx_start = .;
+ *(.ARM.exidx*)
+ __exidx_end = .;
+ } >FLASH
+
+ .preinit_array :
+ {
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP (*(.preinit_array*))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+ } >FLASH
+ .init_array :
+ {
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP (*(SORT(.init_array.*)))
+ KEEP (*(.init_array*))
+ PROVIDE_HIDDEN (__init_array_end = .);
+ } >FLASH
+ .fini_array :
+ {
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP (*(SORT(.fini_array.*)))
+ KEEP (*(.fini_array*))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+ } >FLASH
+
+ /* used by the startup to initialize data */
+ _sidata = LOADADDR(.data);
+
+ /* Initialized data sections goes into RAM, load LMA copy after code */
+ .data :
+ {
+ . = ALIGN(4);
+ _sdata = .; /* create a global symbol at data start */
+ *(.data) /* .data sections */
+ *(.data*) /* .data* sections */
+
+ . = ALIGN(4);
+ _edata = .; /* define a global symbol at data end */
+ } >RAM AT> FLASH
+
+ /* Uninitialized data section */
+ . = ALIGN(4);
+ .bss :
+ {
+ /* This is used by the startup in order to initialize the .bss secion */
+ _sbss = .; /* define a global symbol at bss start */
+ __bss_start__ = _sbss;
+ *(.bss)
+ *(.bss*)
+ *(COMMON)
+
+ . = ALIGN(4);
+ _ebss = .; /* define a global symbol at bss end */
+ __bss_end__ = _ebss;
+ } >RAM
+
+ /* User_heap_stack section, used to check that there is enough RAM left */
+ ._user_heap_stack :
+ {
+ . = ALIGN(4);
+ PROVIDE ( end = . );
+ PROVIDE ( _end = . );
+ . = . + _Min_Heap_Size;
+ . = . + _Min_Stack_Size;
+ . = ALIGN(4);
+ } >RAM
+
+
+
+ /* Remove information from the standard libraries */
+ /DISCARD/ :
+ {
+ libc.a ( * )
+ libm.a ( * )
+ libgcc.a ( * )
+ }
+
+ .ARM.attributes 0 : { *(.ARM.attributes) }
+}
diff --git a/f0/linker_scripts/STMF0_256FLASH_32RAM.ld b/f0/linker_scripts/STMF0_256FLASH_32RAM.ld
new file mode 100644
index 0000000000000000000000000000000000000000..30df4ea4d4fd7a493fd9aebcc1632521cc860fca
--- /dev/null
+++ b/f0/linker_scripts/STMF0_256FLASH_32RAM.ld
@@ -0,0 +1,165 @@
+/*
+*****************************************************************************
+**
+** File : stm32_flash.ld
+**
+** Abstract : Linker script for STM32F4 Devices with 1024KByte FLASH
+** and 192KByte RAM
+**
+** Set heap size, stack size and stack location according
+** to application requirements.
+**
+** Set memory bank area and size if external memory is used.
+**
+** Target : STMicroelectronics STM32
+**
+** Environment : GNU compiler
+**
+** Distribution: The file is distributed “as is,” without any warranty
+** of any kind.
+**
+** (c)Copyright Atollic AB.
+** You may use this file as-is or modify it according to the needs of your
+** project. This file may only be built (assembled or compiled and linked)
+** using the Atollic TrueSTUDIO(R) product. The use of this file together
+** with other tools than Atollic TrueSTUDIO(R) is not permitted.
+**
+*****************************************************************************
+*/
+
+/* Entry Point */
+ENTRY(Reset_Handler)
+
+/* Highest address of the user mode stack */
+_estack = 0x20007FFF; /* end of RAM */
+
+/* Generate a link error if heap and stack don't fit into RAM */
+_Min_Heap_Size = 0; /* required amount of heap */
+_Min_Stack_Size = 0x400; /* required amount of stack */
+
+/* Specify the memory areas */
+MEMORY
+{
+FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 256K
+RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 32K
+}
+
+/* Define output sections */
+SECTIONS
+{
+ /* The startup code goes first into FLASH */
+ .isr_vector :
+ {
+ . = ALIGN(4);
+ KEEP(*(.isr_vector)) /* Startup code */
+ . = ALIGN(4);
+ } >FLASH
+
+ /* The program code and other data goes into FLASH */
+ .text :
+ {
+ . = ALIGN(4);
+ *(.text) /* .text sections (code) */
+ *(.text*) /* .text* sections (code) */
+ *(.glue_7) /* glue arm to thumb code */
+ *(.glue_7t) /* glue thumb to arm code */
+ *(.eh_frame)
+
+ KEEP (*(.init))
+ KEEP (*(.fini))
+
+ . = ALIGN(4);
+ _etext = .; /* define a global symbols at end of code */
+ } >FLASH
+
+ /* Constant data goes into FLASH */
+ .rodata :
+ {
+ . = ALIGN(4);
+ *(.rodata) /* .rodata sections (constants, strings, etc.) */
+ *(.rodata*) /* .rodata* sections (constants, strings, etc.) */
+ . = ALIGN(4);
+ } >FLASH
+
+ .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
+ .ARM : {
+ __exidx_start = .;
+ *(.ARM.exidx*)
+ __exidx_end = .;
+ } >FLASH
+
+ .preinit_array :
+ {
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP (*(.preinit_array*))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+ } >FLASH
+ .init_array :
+ {
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP (*(SORT(.init_array.*)))
+ KEEP (*(.init_array*))
+ PROVIDE_HIDDEN (__init_array_end = .);
+ } >FLASH
+ .fini_array :
+ {
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP (*(SORT(.fini_array.*)))
+ KEEP (*(.fini_array*))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+ } >FLASH
+
+ /* used by the startup to initialize data */
+ _sidata = LOADADDR(.data);
+
+ /* Initialized data sections goes into RAM, load LMA copy after code */
+ .data :
+ {
+ . = ALIGN(4);
+ _sdata = .; /* create a global symbol at data start */
+ *(.data) /* .data sections */
+ *(.data*) /* .data* sections */
+
+ . = ALIGN(4);
+ _edata = .; /* define a global symbol at data end */
+ } >RAM AT> FLASH
+
+ /* Uninitialized data section */
+ . = ALIGN(4);
+ .bss :
+ {
+ /* This is used by the startup in order to initialize the .bss secion */
+ _sbss = .; /* define a global symbol at bss start */
+ __bss_start__ = _sbss;
+ *(.bss)
+ *(.bss*)
+ *(COMMON)
+
+ . = ALIGN(4);
+ _ebss = .; /* define a global symbol at bss end */
+ __bss_end__ = _ebss;
+ } >RAM
+
+ /* User_heap_stack section, used to check that there is enough RAM left */
+ ._user_heap_stack :
+ {
+ . = ALIGN(4);
+ PROVIDE ( end = . );
+ PROVIDE ( _end = . );
+ . = . + _Min_Heap_Size;
+ . = . + _Min_Stack_Size;
+ . = ALIGN(4);
+ } >RAM
+
+
+
+ /* Remove information from the standard libraries */
+ /DISCARD/ :
+ {
+ libc.a ( * )
+ libm.a ( * )
+ libgcc.a ( * )
+ }
+
+ .ARM.attributes 0 : { *(.ARM.attributes) }
+}
diff --git a/f0/linker_scripts/STMF0_32FLASH_4RAM.ld b/f0/linker_scripts/STMF0_32FLASH_4RAM.ld
new file mode 100644
index 0000000000000000000000000000000000000000..9b6ca880a5621db7ae9a8fe28334879e7c98c49d
--- /dev/null
+++ b/f0/linker_scripts/STMF0_32FLASH_4RAM.ld
@@ -0,0 +1,165 @@
+/*
+*****************************************************************************
+**
+** File : stm32_flash.ld
+**
+** Abstract : Linker script for STM32F4 Devices with 1024KByte FLASH
+** and 192KByte RAM
+**
+** Set heap size, stack size and stack location according
+** to application requirements.
+**
+** Set memory bank area and size if external memory is used.
+**
+** Target : STMicroelectronics STM32
+**
+** Environment : GNU compiler
+**
+** Distribution: The file is distributed “as is,” without any warranty
+** of any kind.
+**
+** (c)Copyright Atollic AB.
+** You may use this file as-is or modify it according to the needs of your
+** project. This file may only be built (assembled or compiled and linked)
+** using the Atollic TrueSTUDIO(R) product. The use of this file together
+** with other tools than Atollic TrueSTUDIO(R) is not permitted.
+**
+*****************************************************************************
+*/
+
+/* Entry Point */
+ENTRY(Reset_Handler)
+
+/* Highest address of the user mode stack */
+_estack = 0x20000FFF; /* end of RAM */
+
+/* Generate a link error if heap and stack don't fit into RAM */
+_Min_Heap_Size = 0; /* required amount of heap */
+_Min_Stack_Size = 0x400; /* required amount of stack */
+
+/* Specify the memory areas */
+MEMORY
+{
+FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 32K
+RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 4K
+}
+
+/* Define output sections */
+SECTIONS
+{
+ /* The startup code goes first into FLASH */
+ .isr_vector :
+ {
+ . = ALIGN(4);
+ KEEP(*(.isr_vector)) /* Startup code */
+ . = ALIGN(4);
+ } >FLASH
+
+ /* The program code and other data goes into FLASH */
+ .text :
+ {
+ . = ALIGN(4);
+ *(.text) /* .text sections (code) */
+ *(.text*) /* .text* sections (code) */
+ *(.glue_7) /* glue arm to thumb code */
+ *(.glue_7t) /* glue thumb to arm code */
+ *(.eh_frame)
+
+ KEEP (*(.init))
+ KEEP (*(.fini))
+
+ . = ALIGN(4);
+ _etext = .; /* define a global symbols at end of code */
+ } >FLASH
+
+ /* Constant data goes into FLASH */
+ .rodata :
+ {
+ . = ALIGN(4);
+ *(.rodata) /* .rodata sections (constants, strings, etc.) */
+ *(.rodata*) /* .rodata* sections (constants, strings, etc.) */
+ . = ALIGN(4);
+ } >FLASH
+
+ .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
+ .ARM : {
+ __exidx_start = .;
+ *(.ARM.exidx*)
+ __exidx_end = .;
+ } >FLASH
+
+ .preinit_array :
+ {
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP (*(.preinit_array*))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+ } >FLASH
+ .init_array :
+ {
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP (*(SORT(.init_array.*)))
+ KEEP (*(.init_array*))
+ PROVIDE_HIDDEN (__init_array_end = .);
+ } >FLASH
+ .fini_array :
+ {
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP (*(SORT(.fini_array.*)))
+ KEEP (*(.fini_array*))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+ } >FLASH
+
+ /* used by the startup to initialize data */
+ _sidata = LOADADDR(.data);
+
+ /* Initialized data sections goes into RAM, load LMA copy after code */
+ .data :
+ {
+ . = ALIGN(4);
+ _sdata = .; /* create a global symbol at data start */
+ *(.data) /* .data sections */
+ *(.data*) /* .data* sections */
+
+ . = ALIGN(4);
+ _edata = .; /* define a global symbol at data end */
+ } >RAM AT> FLASH
+
+ /* Uninitialized data section */
+ . = ALIGN(4);
+ .bss :
+ {
+ /* This is used by the startup in order to initialize the .bss secion */
+ _sbss = .; /* define a global symbol at bss start */
+ __bss_start__ = _sbss;
+ *(.bss)
+ *(.bss*)
+ *(COMMON)
+
+ . = ALIGN(4);
+ _ebss = .; /* define a global symbol at bss end */
+ __bss_end__ = _ebss;
+ } >RAM
+
+ /* User_heap_stack section, used to check that there is enough RAM left */
+ ._user_heap_stack :
+ {
+ . = ALIGN(4);
+ PROVIDE ( end = . );
+ PROVIDE ( _end = . );
+ . = . + _Min_Heap_Size;
+ . = . + _Min_Stack_Size;
+ . = ALIGN(4);
+ } >RAM
+
+
+
+ /* Remove information from the standard libraries */
+ /DISCARD/ :
+ {
+ libc.a ( * )
+ libm.a ( * )
+ libgcc.a ( * )
+ }
+
+ .ARM.attributes 0 : { *(.ARM.attributes) }
+}
diff --git a/f0/linker_scripts/STMF0_32FLASH_6RAM.ld b/f0/linker_scripts/STMF0_32FLASH_6RAM.ld
new file mode 100644
index 0000000000000000000000000000000000000000..f8f0e3dcf051b42f85b8af526cf84c8e01f6eacc
--- /dev/null
+++ b/f0/linker_scripts/STMF0_32FLASH_6RAM.ld
@@ -0,0 +1,165 @@
+/*
+*****************************************************************************
+**
+** File : stm32_flash.ld
+**
+** Abstract : Linker script for STM32F4 Devices with 1024KByte FLASH
+** and 192KByte RAM
+**
+** Set heap size, stack size and stack location according
+** to application requirements.
+**
+** Set memory bank area and size if external memory is used.
+**
+** Target : STMicroelectronics STM32
+**
+** Environment : GNU compiler
+**
+** Distribution: The file is distributed “as is,” without any warranty
+** of any kind.
+**
+** (c)Copyright Atollic AB.
+** You may use this file as-is or modify it according to the needs of your
+** project. This file may only be built (assembled or compiled and linked)
+** using the Atollic TrueSTUDIO(R) product. The use of this file together
+** with other tools than Atollic TrueSTUDIO(R) is not permitted.
+**
+*****************************************************************************
+*/
+
+/* Entry Point */
+ENTRY(Reset_Handler)
+
+/* Highest address of the user mode stack */
+_estack = 0x200017FF; /* end of RAM */
+
+/* Generate a link error if heap and stack don't fit into RAM */
+_Min_Heap_Size = 0; /* required amount of heap */
+_Min_Stack_Size = 0x400; /* required amount of stack */
+
+/* Specify the memory areas */
+MEMORY
+{
+FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 32K
+RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 6K
+}
+
+/* Define output sections */
+SECTIONS
+{
+ /* The startup code goes first into FLASH */
+ .isr_vector :
+ {
+ . = ALIGN(4);
+ KEEP(*(.isr_vector)) /* Startup code */
+ . = ALIGN(4);
+ } >FLASH
+
+ /* The program code and other data goes into FLASH */
+ .text :
+ {
+ . = ALIGN(4);
+ *(.text) /* .text sections (code) */
+ *(.text*) /* .text* sections (code) */
+ *(.glue_7) /* glue arm to thumb code */
+ *(.glue_7t) /* glue thumb to arm code */
+ *(.eh_frame)
+
+ KEEP (*(.init))
+ KEEP (*(.fini))
+
+ . = ALIGN(4);
+ _etext = .; /* define a global symbols at end of code */
+ } >FLASH
+
+ /* Constant data goes into FLASH */
+ .rodata :
+ {
+ . = ALIGN(4);
+ *(.rodata) /* .rodata sections (constants, strings, etc.) */
+ *(.rodata*) /* .rodata* sections (constants, strings, etc.) */
+ . = ALIGN(4);
+ } >FLASH
+
+ .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
+ .ARM : {
+ __exidx_start = .;
+ *(.ARM.exidx*)
+ __exidx_end = .;
+ } >FLASH
+
+ .preinit_array :
+ {
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP (*(.preinit_array*))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+ } >FLASH
+ .init_array :
+ {
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP (*(SORT(.init_array.*)))
+ KEEP (*(.init_array*))
+ PROVIDE_HIDDEN (__init_array_end = .);
+ } >FLASH
+ .fini_array :
+ {
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP (*(SORT(.fini_array.*)))
+ KEEP (*(.fini_array*))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+ } >FLASH
+
+ /* used by the startup to initialize data */
+ _sidata = LOADADDR(.data);
+
+ /* Initialized data sections goes into RAM, load LMA copy after code */
+ .data :
+ {
+ . = ALIGN(4);
+ _sdata = .; /* create a global symbol at data start */
+ *(.data) /* .data sections */
+ *(.data*) /* .data* sections */
+
+ . = ALIGN(4);
+ _edata = .; /* define a global symbol at data end */
+ } >RAM AT> FLASH
+
+ /* Uninitialized data section */
+ . = ALIGN(4);
+ .bss :
+ {
+ /* This is used by the startup in order to initialize the .bss secion */
+ _sbss = .; /* define a global symbol at bss start */
+ __bss_start__ = _sbss;
+ *(.bss)
+ *(.bss*)
+ *(COMMON)
+
+ . = ALIGN(4);
+ _ebss = .; /* define a global symbol at bss end */
+ __bss_end__ = _ebss;
+ } >RAM
+
+ /* User_heap_stack section, used to check that there is enough RAM left */
+ ._user_heap_stack :
+ {
+ . = ALIGN(4);
+ PROVIDE ( end = . );
+ PROVIDE ( _end = . );
+ . = . + _Min_Heap_Size;
+ . = . + _Min_Stack_Size;
+ . = ALIGN(4);
+ } >RAM
+
+
+
+ /* Remove information from the standard libraries */
+ /DISCARD/ :
+ {
+ libc.a ( * )
+ libm.a ( * )
+ libgcc.a ( * )
+ }
+
+ .ARM.attributes 0 : { *(.ARM.attributes) }
+}
diff --git a/f0/linker_scripts/STMF0_32FLASH_8RAM.ld b/f0/linker_scripts/STMF0_32FLASH_8RAM.ld
new file mode 100644
index 0000000000000000000000000000000000000000..b86f6d3eeff8e7a0369cab0ee7d838dea5830818
--- /dev/null
+++ b/f0/linker_scripts/STMF0_32FLASH_8RAM.ld
@@ -0,0 +1,165 @@
+/*
+*****************************************************************************
+**
+** File : stm32_flash.ld
+**
+** Abstract : Linker script for STM32F4 Devices with 1024KByte FLASH
+** and 192KByte RAM
+**
+** Set heap size, stack size and stack location according
+** to application requirements.
+**
+** Set memory bank area and size if external memory is used.
+**
+** Target : STMicroelectronics STM32
+**
+** Environment : GNU compiler
+**
+** Distribution: The file is distributed “as is,” without any warranty
+** of any kind.
+**
+** (c)Copyright Atollic AB.
+** You may use this file as-is or modify it according to the needs of your
+** project. This file may only be built (assembled or compiled and linked)
+** using the Atollic TrueSTUDIO(R) product. The use of this file together
+** with other tools than Atollic TrueSTUDIO(R) is not permitted.
+**
+*****************************************************************************
+*/
+
+/* Entry Point */
+ENTRY(Reset_Handler)
+
+/* Highest address of the user mode stack */
+_estack = 0x20001FFF; /* end of RAM */
+
+/* Generate a link error if heap and stack don't fit into RAM */
+_Min_Heap_Size = 0; /* required amount of heap */
+_Min_Stack_Size = 0x400; /* required amount of stack */
+
+/* Specify the memory areas */
+MEMORY
+{
+FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 32K
+RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 8K
+}
+
+/* Define output sections */
+SECTIONS
+{
+ /* The startup code goes first into FLASH */
+ .isr_vector :
+ {
+ . = ALIGN(4);
+ KEEP(*(.isr_vector)) /* Startup code */
+ . = ALIGN(4);
+ } >FLASH
+
+ /* The program code and other data goes into FLASH */
+ .text :
+ {
+ . = ALIGN(4);
+ *(.text) /* .text sections (code) */
+ *(.text*) /* .text* sections (code) */
+ *(.glue_7) /* glue arm to thumb code */
+ *(.glue_7t) /* glue thumb to arm code */
+ *(.eh_frame)
+
+ KEEP (*(.init))
+ KEEP (*(.fini))
+
+ . = ALIGN(4);
+ _etext = .; /* define a global symbols at end of code */
+ } >FLASH
+
+ /* Constant data goes into FLASH */
+ .rodata :
+ {
+ . = ALIGN(4);
+ *(.rodata) /* .rodata sections (constants, strings, etc.) */
+ *(.rodata*) /* .rodata* sections (constants, strings, etc.) */
+ . = ALIGN(4);
+ } >FLASH
+
+ .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
+ .ARM : {
+ __exidx_start = .;
+ *(.ARM.exidx*)
+ __exidx_end = .;
+ } >FLASH
+
+ .preinit_array :
+ {
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP (*(.preinit_array*))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+ } >FLASH
+ .init_array :
+ {
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP (*(SORT(.init_array.*)))
+ KEEP (*(.init_array*))
+ PROVIDE_HIDDEN (__init_array_end = .);
+ } >FLASH
+ .fini_array :
+ {
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP (*(SORT(.fini_array.*)))
+ KEEP (*(.fini_array*))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+ } >FLASH
+
+ /* used by the startup to initialize data */
+ _sidata = LOADADDR(.data);
+
+ /* Initialized data sections goes into RAM, load LMA copy after code */
+ .data :
+ {
+ . = ALIGN(4);
+ _sdata = .; /* create a global symbol at data start */
+ *(.data) /* .data sections */
+ *(.data*) /* .data* sections */
+
+ . = ALIGN(4);
+ _edata = .; /* define a global symbol at data end */
+ } >RAM AT> FLASH
+
+ /* Uninitialized data section */
+ . = ALIGN(4);
+ .bss :
+ {
+ /* This is used by the startup in order to initialize the .bss secion */
+ _sbss = .; /* define a global symbol at bss start */
+ __bss_start__ = _sbss;
+ *(.bss)
+ *(.bss*)
+ *(COMMON)
+
+ . = ALIGN(4);
+ _ebss = .; /* define a global symbol at bss end */
+ __bss_end__ = _ebss;
+ } >RAM
+
+ /* User_heap_stack section, used to check that there is enough RAM left */
+ ._user_heap_stack :
+ {
+ . = ALIGN(4);
+ PROVIDE ( end = . );
+ PROVIDE ( _end = . );
+ . = . + _Min_Heap_Size;
+ . = . + _Min_Stack_Size;
+ . = ALIGN(4);
+ } >RAM
+
+
+
+ /* Remove information from the standard libraries */
+ /DISCARD/ :
+ {
+ libc.a ( * )
+ libm.a ( * )
+ libgcc.a ( * )
+ }
+
+ .ARM.attributes 0 : { *(.ARM.attributes) }
+}
diff --git a/f0/linker_scripts/STMF0_64FLASH_16RAM.ld b/f0/linker_scripts/STMF0_64FLASH_16RAM.ld
new file mode 100644
index 0000000000000000000000000000000000000000..cfe78c7b597ee6afb05af698ecbfad4f34e57ad5
--- /dev/null
+++ b/f0/linker_scripts/STMF0_64FLASH_16RAM.ld
@@ -0,0 +1,165 @@
+/*
+*****************************************************************************
+**
+** File : stm32_flash.ld
+**
+** Abstract : Linker script for STM32F4 Devices with 1024KByte FLASH
+** and 192KByte RAM
+**
+** Set heap size, stack size and stack location according
+** to application requirements.
+**
+** Set memory bank area and size if external memory is used.
+**
+** Target : STMicroelectronics STM32
+**
+** Environment : GNU compiler
+**
+** Distribution: The file is distributed “as is,” without any warranty
+** of any kind.
+**
+** (c)Copyright Atollic AB.
+** You may use this file as-is or modify it according to the needs of your
+** project. This file may only be built (assembled or compiled and linked)
+** using the Atollic TrueSTUDIO(R) product. The use of this file together
+** with other tools than Atollic TrueSTUDIO(R) is not permitted.
+**
+*****************************************************************************
+*/
+
+/* Entry Point */
+ENTRY(Reset_Handler)
+
+/* Highest address of the user mode stack */
+_estack = 0x20003FFF; /* end of RAM */
+
+/* Generate a link error if heap and stack don't fit into RAM */
+_Min_Heap_Size = 0; /* required amount of heap */
+_Min_Stack_Size = 0x400; /* required amount of stack */
+
+/* Specify the memory areas */
+MEMORY
+{
+FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 64K
+RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 16K
+}
+
+/* Define output sections */
+SECTIONS
+{
+ /* The startup code goes first into FLASH */
+ .isr_vector :
+ {
+ . = ALIGN(4);
+ KEEP(*(.isr_vector)) /* Startup code */
+ . = ALIGN(4);
+ } >FLASH
+
+ /* The program code and other data goes into FLASH */
+ .text :
+ {
+ . = ALIGN(4);
+ *(.text) /* .text sections (code) */
+ *(.text*) /* .text* sections (code) */
+ *(.glue_7) /* glue arm to thumb code */
+ *(.glue_7t) /* glue thumb to arm code */
+ *(.eh_frame)
+
+ KEEP (*(.init))
+ KEEP (*(.fini))
+
+ . = ALIGN(4);
+ _etext = .; /* define a global symbols at end of code */
+ } >FLASH
+
+ /* Constant data goes into FLASH */
+ .rodata :
+ {
+ . = ALIGN(4);
+ *(.rodata) /* .rodata sections (constants, strings, etc.) */
+ *(.rodata*) /* .rodata* sections (constants, strings, etc.) */
+ . = ALIGN(4);
+ } >FLASH
+
+ .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
+ .ARM : {
+ __exidx_start = .;
+ *(.ARM.exidx*)
+ __exidx_end = .;
+ } >FLASH
+
+ .preinit_array :
+ {
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP (*(.preinit_array*))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+ } >FLASH
+ .init_array :
+ {
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP (*(SORT(.init_array.*)))
+ KEEP (*(.init_array*))
+ PROVIDE_HIDDEN (__init_array_end = .);
+ } >FLASH
+ .fini_array :
+ {
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP (*(SORT(.fini_array.*)))
+ KEEP (*(.fini_array*))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+ } >FLASH
+
+ /* used by the startup to initialize data */
+ _sidata = LOADADDR(.data);
+
+ /* Initialized data sections goes into RAM, load LMA copy after code */
+ .data :
+ {
+ . = ALIGN(4);
+ _sdata = .; /* create a global symbol at data start */
+ *(.data) /* .data sections */
+ *(.data*) /* .data* sections */
+
+ . = ALIGN(4);
+ _edata = .; /* define a global symbol at data end */
+ } >RAM AT> FLASH
+
+ /* Uninitialized data section */
+ . = ALIGN(4);
+ .bss :
+ {
+ /* This is used by the startup in order to initialize the .bss secion */
+ _sbss = .; /* define a global symbol at bss start */
+ __bss_start__ = _sbss;
+ *(.bss)
+ *(.bss*)
+ *(COMMON)
+
+ . = ALIGN(4);
+ _ebss = .; /* define a global symbol at bss end */
+ __bss_end__ = _ebss;
+ } >RAM
+
+ /* User_heap_stack section, used to check that there is enough RAM left */
+ ._user_heap_stack :
+ {
+ . = ALIGN(4);
+ PROVIDE ( end = . );
+ PROVIDE ( _end = . );
+ . = . + _Min_Heap_Size;
+ . = . + _Min_Stack_Size;
+ . = ALIGN(4);
+ } >RAM
+
+
+
+ /* Remove information from the standard libraries */
+ /DISCARD/ :
+ {
+ libc.a ( * )
+ libm.a ( * )
+ libgcc.a ( * )
+ }
+
+ .ARM.attributes 0 : { *(.ARM.attributes) }
+}
diff --git a/f0/linker_scripts/STMF0_64FLASH_8RAM.ld b/f0/linker_scripts/STMF0_64FLASH_8RAM.ld
new file mode 100644
index 0000000000000000000000000000000000000000..9ca59f5703b6728ad21835fb2ce5acc6b9962d55
--- /dev/null
+++ b/f0/linker_scripts/STMF0_64FLASH_8RAM.ld
@@ -0,0 +1,165 @@
+/*
+*****************************************************************************
+**
+** File : stm32_flash.ld
+**
+** Abstract : Linker script for STM32F4 Devices with 1024KByte FLASH
+** and 192KByte RAM
+**
+** Set heap size, stack size and stack location according
+** to application requirements.
+**
+** Set memory bank area and size if external memory is used.
+**
+** Target : STMicroelectronics STM32
+**
+** Environment : GNU compiler
+**
+** Distribution: The file is distributed “as is,” without any warranty
+** of any kind.
+**
+** (c)Copyright Atollic AB.
+** You may use this file as-is or modify it according to the needs of your
+** project. This file may only be built (assembled or compiled and linked)
+** using the Atollic TrueSTUDIO(R) product. The use of this file together
+** with other tools than Atollic TrueSTUDIO(R) is not permitted.
+**
+*****************************************************************************
+*/
+
+/* Entry Point */
+ENTRY(Reset_Handler)
+
+/* Highest address of the user mode stack */
+_estack = 0x20001FFF; /* end of RAM */
+
+/* Generate a link error if heap and stack don't fit into RAM */
+_Min_Heap_Size = 0; /* required amount of heap */
+_Min_Stack_Size = 0x400; /* required amount of stack */
+
+/* Specify the memory areas */
+MEMORY
+{
+FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 64K
+RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 8K
+}
+
+/* Define output sections */
+SECTIONS
+{
+ /* The startup code goes first into FLASH */
+ .isr_vector :
+ {
+ . = ALIGN(4);
+ KEEP(*(.isr_vector)) /* Startup code */
+ . = ALIGN(4);
+ } >FLASH
+
+ /* The program code and other data goes into FLASH */
+ .text :
+ {
+ . = ALIGN(4);
+ *(.text) /* .text sections (code) */
+ *(.text*) /* .text* sections (code) */
+ *(.glue_7) /* glue arm to thumb code */
+ *(.glue_7t) /* glue thumb to arm code */
+ *(.eh_frame)
+
+ KEEP (*(.init))
+ KEEP (*(.fini))
+
+ . = ALIGN(4);
+ _etext = .; /* define a global symbols at end of code */
+ } >FLASH
+
+ /* Constant data goes into FLASH */
+ .rodata :
+ {
+ . = ALIGN(4);
+ *(.rodata) /* .rodata sections (constants, strings, etc.) */
+ *(.rodata*) /* .rodata* sections (constants, strings, etc.) */
+ . = ALIGN(4);
+ } >FLASH
+
+ .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
+ .ARM : {
+ __exidx_start = .;
+ *(.ARM.exidx*)
+ __exidx_end = .;
+ } >FLASH
+
+ .preinit_array :
+ {
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP (*(.preinit_array*))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+ } >FLASH
+ .init_array :
+ {
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP (*(SORT(.init_array.*)))
+ KEEP (*(.init_array*))
+ PROVIDE_HIDDEN (__init_array_end = .);
+ } >FLASH
+ .fini_array :
+ {
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP (*(SORT(.fini_array.*)))
+ KEEP (*(.fini_array*))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+ } >FLASH
+
+ /* used by the startup to initialize data */
+ _sidata = LOADADDR(.data);
+
+ /* Initialized data sections goes into RAM, load LMA copy after code */
+ .data :
+ {
+ . = ALIGN(4);
+ _sdata = .; /* create a global symbol at data start */
+ *(.data) /* .data sections */
+ *(.data*) /* .data* sections */
+
+ . = ALIGN(4);
+ _edata = .; /* define a global symbol at data end */
+ } >RAM AT> FLASH
+
+ /* Uninitialized data section */
+ . = ALIGN(4);
+ .bss :
+ {
+ /* This is used by the startup in order to initialize the .bss secion */
+ _sbss = .; /* define a global symbol at bss start */
+ __bss_start__ = _sbss;
+ *(.bss)
+ *(.bss*)
+ *(COMMON)
+
+ . = ALIGN(4);
+ _ebss = .; /* define a global symbol at bss end */
+ __bss_end__ = _ebss;
+ } >RAM
+
+ /* User_heap_stack section, used to check that there is enough RAM left */
+ ._user_heap_stack :
+ {
+ . = ALIGN(4);
+ PROVIDE ( end = . );
+ PROVIDE ( _end = . );
+ . = . + _Min_Heap_Size;
+ . = . + _Min_Stack_Size;
+ . = ALIGN(4);
+ } >RAM
+
+
+
+ /* Remove information from the standard libraries */
+ /DISCARD/ :
+ {
+ libc.a ( * )
+ libm.a ( * )
+ libgcc.a ( * )
+ }
+
+ .ARM.attributes 0 : { *(.ARM.attributes) }
+}
diff --git a/f0/select_processor.mk b/f0/select_processor.mk
new file mode 100644
index 0000000000000000000000000000000000000000..3ca5905874b3156d33d88c2d2efda002f9c8ee62
--- /dev/null
+++ b/f0/select_processor.mk
@@ -0,0 +1,275 @@
+ifeq ($(TARGET_PROCESSOR),STM32F030C6)
+ LINKER_SCRIPT_FILE=STM32F0_32FLASH_4RAM.ld
+ STARTUP_FILE=startup_stm32f030x6.s
+ PROCESSOR_MACRO=STM32F030x6
+else ifeq ($(TARGET_PROCESSOR),STM32F030C8)
+ LINKER_SCRIPT_FILE=STM32F0_64FLASH_8RAM.ld
+ STARTUP_FILE=startup_stm32f030x8.s
+ PROCESSOR_MACRO=STM32F030x8
+else ifeq ($(TARGET_PROCESSOR),STM32F030CC)
+ LINKER_SCRIPT_FILE=STM32F0_256FLASH_32RAM.ld
+ STARTUP_FILE=startup_stm32f030xc.s
+ PROCESSOR_MACRO=STM32F030xC
+else ifeq ($(TARGET_PROCESSOR),STM32F030F4)
+ LINKER_SCRIPT_FILE=STM32F0_16FLASH_4RAM.ld
+ STARTUP_FILE=startup_stm32f030x6.s
+ PROCESSOR_MACRO=STM32F030x6
+else ifeq ($(TARGET_PROCESSOR),STM32F030K6)
+ LINKER_SCRIPT_FILE=STM32F0_32FLASH_4RAM.ld
+ STARTUP_FILE=startup_stm32f030x6.s
+ PROCESSOR_MACRO=STM32F030x6
+else ifeq ($(TARGET_PROCESSOR),STM32F030R8)
+ LINKER_SCRIPT_FILE=STM32F0_64FLASH_8RAM.ld
+ STARTUP_FILE=startup_stm32f030x6.s
+ PROCESSOR_MACRO=STM32F030x8
+else ifeq ($(TARGET_PROCESSOR),STM32F030RC)
+ LINKER_SCRIPT_FILE=STM32F0_256FLASH_32RAM.ld
+ STARTUP_FILE=startup_stm32f030xc.s
+ PROCESSOR_MACRO=STM32F030xC
+else ifeq ($(TARGET_PROCESSOR),STM32F031C4)
+ LINKER_SCRIPT_FILE=STM32F0_16FLASH_4RAM.ld
+ STARTUP_FILE=startup_stm32f031x6.s
+ PROCESSOR_MACRO=STM32F030x6
+else ifeq ($(TARGET_PROCESSOR),STM32F031C6)
+ LINKER_SCRIPT_FILE=STM32F0_32FLASH_4RAM.ld
+ STARTUP_FILE=startup_stm32f031x6.s
+ PROCESSOR_MACRO=STM32F030x6
+else ifeq ($(TARGET_PROCESSOR),STM32F031F4)
+ LINKER_SCRIPT_FILE=STM32F0_16FLASH_4RAM.ld
+ STARTUP_FILE=startup_stm32f031x6.s
+ PROCESSOR_MACRO=STM32F031x6
+else ifeq ($(TARGET_PROCESSOR),STM32F031F6)
+ LINKER_SCRIPT_FILE=STM32F0_32FLASH_4RAM.ld
+ STARTUP_FILE=startup_stm32f031x6.s
+ PROCESSOR_MACRO=STM32F031x6
+else ifeq ($(TARGET_PROCESSOR),STM32F031G4)
+ LINKER_SCRIPT_FILE=STM32F0_16FLASH_4RAM.ld
+ STARTUP_FILE=startup_stm32f031x6.s
+ PROCESSOR_MACRO=STM32F031x6
+else ifeq ($(TARGET_PROCESSOR),STM32F031G6)
+ LINKER_SCRIPT_FILE=STM32F0_32FLASH_4RAM.ld
+ STARTUP_FILE=startup_stm32f031x6.s
+ PROCESSOR_MACRO=STM32F031x6
+else ifeq ($(TARGET_PROCESSOR),STM32F031K4)
+ LINKER_SCRIPT_FILE=STM32F0_16FLASH_4RAM.ld
+ STARTUP_FILE=startup_stm32f031x6.s
+ PROCESSOR_MACRO=STM32F031x6
+else ifeq ($(TARGET_PROCESSOR),STM32F031K6)
+ LINKER_SCRIPT_FILE=STM32F0_32FLASH_4RAM.ld
+ STARTUP_FILE=startup_stm32f031x6.s
+ PROCESSOR_MACRO=STM32F031x6
+else ifeq ($(TARGET_PROCESSOR),STM32F038C6)
+ LINKER_SCRIPT_FILE=STM32F0_32FLASH_4RAM.ld
+ STARTUP_FILE=startup_stm32f038xx.s
+ PROCESSOR_MACRO=STM32F038xx
+else ifeq ($(TARGET_PROCESSOR),STM32F038F6)
+ LINKER_SCRIPT_FILE=STM32F0_32FLASH_4RAM.ld
+ STARTUP_FILE=startup_stm32f038xx.s
+ PROCESSOR_MACRO=STM32F038xx
+else ifeq ($(TARGET_PROCESSOR),STM32F038G6)
+ LINKER_SCRIPT_FILE=STM32F0_32FLASH_4RAM.ld
+ STARTUP_FILE=startup_stm32f038xx.s
+ PROCESSOR_MACRO=STM32F038xx
+else ifeq ($(TARGET_PROCESSOR),STM32F038K6)
+ LINKER_SCRIPT_FILE=STM32F0_32FLASH_4RAM.ld
+ STARTUP_FILE=startup_stm32f038xx.s
+ PROCESSOR_MACRO=STM32F038xx
+else ifeq ($(TARGET_PROCESSOR),STM32F042C4)
+ LINKER_SCRIPT_FILE=STM32F0_16FLASH_6RAM.ld
+ STARTUP_FILE=startup_stm32f042x6.s
+ PROCESSOR_MACRO=STM32F042x6
+else ifeq ($(TARGET_PROCESSOR),STM32F042C6)
+ LINKER_SCRIPT_FILE=STM32F0_32FLASH_6RAM.ld
+ STARTUP_FILE=startup_stm32f042x6.s
+ PROCESSOR_MACRO=STM32F042x6
+else ifeq ($(TARGET_PROCESSOR),STM32F042F4)
+ LINKER_SCRIPT_FILE=STM32F0_16FLASH_6RAM.ld
+ STARTUP_FILE=startup_stm32f042x6.s
+ PROCESSOR_MACRO=STM32F042x6
+else ifeq ($(TARGET_PROCESSOR),STM32F042F6)
+ LINKER_SCRIPT_FILE=STM32F0_32FLASH_6RAM.ld
+ STARTUP_FILE=startup_stm32f042x6.s
+ PROCESSOR_MACRO=STM32F042x6
+else ifeq ($(TARGET_PROCESSOR),STM32F042G4)
+ LINKER_SCRIPT_FILE=STM32F0_16FLASH_6RAM.ld
+ STARTUP_FILE=startup_stm32f042x6.s
+ PROCESSOR_MACRO=STM32F042x6
+else ifeq ($(TARGET_PROCESSOR),STM32F042G6)
+ LINKER_SCRIPT_FILE=STM32F0_32FLASH_6RAM.ld
+ STARTUP_FILE=startup_stm32f042x6.s
+ PROCESSOR_MACRO=STM32F042x6
+else ifeq ($(TARGET_PROCESSOR),STM32F042K4)
+ LINKER_SCRIPT_FILE=STM32F0_16FLASH_6RAM.ld
+ STARTUP_FILE=startup_stm32f042x6.s
+ PROCESSOR_MACRO=STM32F042x6
+else ifeq ($(TARGET_PROCESSOR),STM32F042K6)
+ LINKER_SCRIPT_FILE=STM32F0_32FLASH_6RAM.ld
+ STARTUP_FILE=startup_stm32f042x6.s
+ PROCESSOR_MACRO=STM32F042x6
+else ifeq ($(TARGET_PROCESSOR),STM32F042T6)
+ LINKER_SCRIPT_FILE=STM32F0_32FLASH_6RAM.ld
+ STARTUP_FILE=startup_stm32f042x6.s
+ PROCESSOR_MACRO=STM32F042x6
+else ifeq ($(TARGET_PROCESSOR),STM32F048C6)
+ LINKER_SCRIPT_FILE=STM32F0_32FLASH_6RAM.ld
+ STARTUP_FILE=startup_stm32f048x6.s
+ PROCESSOR_MACRO=STM32F048x6
+else ifeq ($(TARGET_PROCESSOR),STM32F048G6)
+ LINKER_SCRIPT_FILE=STM32F0_32FLASH_6RAM.ld
+ STARTUP_FILE=startup_stm32f048x6.s
+ PROCESSOR_MACRO=STM32F048x6
+else ifeq ($(TARGET_PROCESSOR),STM32F048T6)
+ LINKER_SCRIPT_FILE=STM32F0_32FLASH_6RAM.ld
+ STARTUP_FILE=startup_stm32f048x6.s
+ PROCESSOR_MACRO=STM32F048x6
+else ifeq ($(TARGET_PROCESSOR),STM32F051C4)
+ LINKER_SCRIPT_FILE=STM32F0_16FLASH_8RAM.ld
+ STARTUP_FILE=startup_stm32f051x8.s
+ PROCESSOR_MACRO=STM32F051x8
+else ifeq ($(TARGET_PROCESSOR),STM32F051C6)
+ LINKER_SCRIPT_FILE=STM32F0_32FLASH_8RAM.ld
+ STARTUP_FILE=startup_stm32f051x8.s
+ PROCESSOR_MACRO=STM32F051x8
+else ifeq ($(TARGET_PROCESSOR),STM32F051C8)
+ LINKER_SCRIPT_FILE=STM32F0_64FLASH_8RAM.ld
+ STARTUP_FILE=startup_stm32f051x8.s
+ PROCESSOR_MACRO=STM32F051x8
+else ifeq ($(TARGET_PROCESSOR),STM32F051K4)
+ LINKER_SCRIPT_FILE=STM32F0_16FLASH_8RAM.ld
+ STARTUP_FILE=startup_stm32f051x8.s
+ PROCESSOR_MACRO=STM32F051x8
+else ifeq ($(TARGET_PROCESSOR),STM32F051K6)
+ LINKER_SCRIPT_FILE=STM32F0_32FLASH_8RAM.ld
+ STARTUP_FILE=startup_stm32f051x8.s
+ PROCESSOR_MACRO=STM32F051x8
+else ifeq ($(TARGET_PROCESSOR),STM32F051K8)
+ LINKER_SCRIPT_FILE=STM32F0_64FLASH_8RAM.ld
+ STARTUP_FILE=startup_stm32f051x8.s
+ PROCESSOR_MACRO=STM32F051x8
+else ifeq ($(TARGET_PROCESSOR),STM32F051R4)
+ LINKER_SCRIPT_FILE=STM32F0_16FLASH_8RAM.ld
+ STARTUP_FILE=startup_stm32f051x8.s
+ PROCESSOR_MACRO=STM32F051x8
+else ifeq ($(TARGET_PROCESSOR),STM32F051R6)
+ LINKER_SCRIPT_FILE=STM32F0_32FLASH_8RAM.ld
+ STARTUP_FILE=startup_stm32f051x8.s
+ PROCESSOR_MACRO=STM32F051x8
+else ifeq ($(TARGET_PROCESSOR),STM32F051R8)
+ LINKER_SCRIPT_FILE=STM32F0_64FLASH_8RAM.ld
+ STARTUP_FILE=startup_stm32f051x8.s
+ PROCESSOR_MACRO=STM32F051x8
+else ifeq ($(TARGET_PROCESSOR),STM32F058C8)
+ LINKER_SCRIPT_FILE=STM32F0_64FLASH_8RAM.ld
+ STARTUP_FILE=startup_stm32f058xx.s
+ PROCESSOR_MACRO=STM32F058xx
+else ifeq ($(TARGET_PROCESSOR),STM32F058R8)
+ LINKER_SCRIPT_FILE=STM32F0_64FLASH_8RAM.ld
+ STARTUP_FILE=startup_stm32f058xx.s
+ PROCESSOR_MACRO=STM32F058xx
+else ifeq ($(TARGET_PROCESSOR),STM32F070C6)
+ LINKER_SCRIPT_FILE=STM32F0_32FLASH_6RAM.ld
+ STARTUP_FILE=startup_stm32f070x6.s
+ PROCESSOR_MACRO=STM32F070x6
+else ifeq ($(TARGET_PROCESSOR),STM32F070CB)
+ LINKER_SCRIPT_FILE=STM32F0_128FLASH_16RAM.ld
+ STARTUP_FILE=startup_stm32f070xb.s
+ PROCESSOR_MACRO=STM32F070xB
+else ifeq ($(TARGET_PROCESSOR),STM32F070F6)
+ LINKER_SCRIPT_FILE=STM32F0_32FLASH_6RAM.ld
+ STARTUP_FILE=startup_stm32f070x6.s
+ PROCESSOR_MACRO=STM32F070x6
+else ifeq ($(TARGET_PROCESSOR),STM32F070RB)
+ LINKER_SCRIPT_FILE=STM32F0_128FLASH_16RAM.ld
+ STARTUP_FILE=startup_stm32f070xb.s
+ PROCESSOR_MACRO=STM32F070xB
+else ifeq ($(TARGET_PROCESSOR),STM32F071CB)
+ LINKER_SCRIPT_FILE=STM32F0_128FLASH_16RAM.ld
+ STARTUP_FILE=startup_stm32f071xb.s
+ PROCESSOR_MACRO=STM32F071xB
+else ifeq ($(TARGET_PROCESSOR),STM32F071RB)
+ LINKER_SCRIPT_FILE=STM32F0_128FLASH_16RAM.ld
+ STARTUP_FILE=startup_stm32f071xb.s
+ PROCESSOR_MACRO=STM32F071xB
+else ifeq ($(TARGET_PROCESSOR),STM32F071V8)
+ LINKER_SCRIPT_FILE=STM32F0_64FLASH_16RAM.ld
+ STARTUP_FILE=startup_stm32f071xb.s
+ PROCESSOR_MACRO=STM32F071xB
+else ifeq ($(TARGET_PROCESSOR),STM32F071VB)
+ LINKER_SCRIPT_FILE=STM32F0_128FLASH_16RAM.ld
+ STARTUP_FILE=startup_stm32f071xb.s
+ PROCESSOR_MACRO=STM32F071xB
+else ifeq ($(TARGET_PROCESSOR),STM32F072C8)
+ LINKER_SCRIPT_FILE=STM32F0_64FLASH_16RAM.ld
+ STARTUP_FILE=startup_stm32f072xb.s
+ PROCESSOR_MACRO=STM32F072xB
+else ifeq ($(TARGET_PROCESSOR),STM32F072CB)
+ LINKER_SCRIPT_FILE=STM32F0_128FLASH_16RAM.ld
+ STARTUP_FILE=startup_stm32f072xb.s
+ PROCESSOR_MACRO=STM32F072xB
+else ifeq ($(TARGET_PROCESSOR),STM32F072R8)
+ LINKER_SCRIPT_FILE=STM32F0_64FLASH_16RAM.ld
+ STARTUP_FILE=startup_stm32f072xb.s
+ PROCESSOR_MACRO=STM32F072xB
+else ifeq ($(TARGET_PROCESSOR),STM32F072RB)
+ LINKER_SCRIPT_FILE=STM32F0_128FLASH_16RAM.ld
+ STARTUP_FILE=startup_stm32f072xb.s
+ PROCESSOR_MACRO=STM32F072xB
+else ifeq ($(TARGET_PROCESSOR),STM32F072V8)
+ LINKER_SCRIPT_FILE=STM32F0_64FLASH_16RAM.ld
+ STARTUP_FILE=startup_stm32f072xb.s
+ PROCESSOR_MACRO=STM32F072xB
+else ifeq ($(TARGET_PROCESSOR),STM32F072VB)
+ LINKER_SCRIPT_FILE=STM32F0_128FLASH_16RAM.ld
+ STARTUP_FILE=startup_stm32f072xb.s
+ PROCESSOR_MACRO=STM32F072xB
+else ifeq ($(TARGET_PROCESSOR),STM32F078CB)
+ LINKER_SCRIPT_FILE=STM32F0_128FLASH_16RAM.ld
+ STARTUP_FILE=startup_stm32f078xx.s
+ PROCESSOR_MACRO=STM32F078xx
+else ifeq ($(TARGET_PROCESSOR),STM32F078RB)
+ LINKER_SCRIPT_FILE=STM32F0_128FLASH_16RAM.ld
+ STARTUP_FILE=startup_stm32f078xx.s
+ PROCESSOR_MACRO=STM32F078xx
+else ifeq ($(TARGET_PROCESSOR),STM32F078VB)
+ LINKER_SCRIPT_FILE=STM32F0_128FLASH_16RAM.ld
+ STARTUP_FILE=startup_stm32f078xx.s
+ PROCESSOR_MACRO=STM32F078xx
+else ifeq ($(TARGET_PROCESSOR),STM32F091CB)
+ LINKER_SCRIPT_FILE=STM32F0_128FLASH_32RAM.ld
+ STARTUP_FILE=startup_stm32f091xc.s
+ PROCESSOR_MACRO=STM32F091xC
+else ifeq ($(TARGET_PROCESSOR),STM32F091CC)
+ LINKER_SCRIPT_FILE=STM32F0_256FLASH_32RAM.ld
+ STARTUP_FILE=startup_stm32f091xc.s
+ PROCESSOR_MACRO=STM32F091xC
+else ifeq ($(TARGET_PROCESSOR),STM32F091RB)
+ LINKER_SCRIPT_FILE=STM32F0_128FLASH_32RAM.ld
+ STARTUP_FILE=startup_stm32f091xc.s
+ PROCESSOR_MACRO=STM32F091xC
+else ifeq ($(TARGET_PROCESSOR),STM32F091RC)
+ LINKER_SCRIPT_FILE=STM32F0_256FLASH_32RAM.ld
+ STARTUP_FILE=startup_stm32f091xc.s
+ PROCESSOR_MACRO=STM32F091xC
+else ifeq ($(TARGET_PROCESSOR),STM32F091VB)
+ LINKER_SCRIPT_FILE=STM32F0_128FLASH_32RAM.ld
+ STARTUP_FILE=startup_stm32f091xc.s
+ PROCESSOR_MACRO=STM32F091xC
+else ifeq ($(TARGET_PROCESSOR),STM32F091VC)
+ LINKER_SCRIPT_FILE=STM32F0_256FLASH_32RAM.ld
+ STARTUP_FILE=startup_stm32f091xc.s
+ PROCESSOR_MACRO=STM32F091xC
+else ifeq ($(TARGET_PROCESSOR),STM32F098CC)
+ LINKER_SCRIPT_FILE=STM32F0_256FLASH_32RAM.ld
+ STARTUP_FILE=startup_stm32f098xx.s
+ PROCESSOR_MACRO=STM32F098xx
+else ifeq ($(TARGET_PROCESSOR),STM32F098RC)
+ LINKER_SCRIPT_FILE=STM32F0_256FLASH_32RAM.ld
+ STARTUP_FILE=startup_stm32f098xx.s
+ PROCESSOR_MACRO=STM32F098xx
+else ifeq ($(TARGET_PROCESSOR),STM32F098VC)
+ LINKER_SCRIPT_FILE=STM32F0_256FLASH_32RAM.ld
+ STARTUP_FILE=startup_stm32f098xx.s
+ PROCESSOR_MACRO=STM32F098xx
+endif
+
+
diff --git a/f0/src/devices/system_stm32f0xx.c b/f0/src/devices/system_stm32f0xx.c
new file mode 100755
index 0000000000000000000000000000000000000000..073651c0e070c89f1f43cd11d2d01a4ed53dcbee
--- /dev/null
+++ b/f0/src/devices/system_stm32f0xx.c
@@ -0,0 +1,329 @@
+/**
+ ******************************************************************************
+ * @file system_stm32f0xx.c
+ * @author MCD Application Team
+ * @version V2.2.1
+ * @date 09-January-2015
+ * @brief CMSIS Cortex-M0 Device Peripheral Access Layer System Source File.
+ *
+ * 1. This file provides two functions and one global variable to be called from
+ * user application:
+ * - SystemInit(): This function is called at startup just after reset and
+ * before branch to main program. This call is made inside
+ * the "startup_stm32f0xx.s" file.
+ *
+ * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+ * by the user application to setup the SysTick
+ * timer or configure other parameters.
+ *
+ * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+ * be called whenever the core clock is changed
+ * during program execution.
+ *
+ * 2. After each device reset the HSI (8 MHz) is used as system clock source.
+ * Then SystemInit() function is called, in "startup_stm32f0xx.s" file, to
+ * configure the system clock before to branch to main program.
+ *
+ * 3. This file configures the system clock as follows:
+ *=============================================================================
+ * Supported STM32F0xx device
+ *-----------------------------------------------------------------------------
+ * System Clock source | HSI
+ *-----------------------------------------------------------------------------
+ * SYSCLK(Hz) | 8000000
+ *-----------------------------------------------------------------------------
+ * HCLK(Hz) | 8000000
+ *-----------------------------------------------------------------------------
+ * AHB Prescaler | 1
+ *-----------------------------------------------------------------------------
+ * APB1 Prescaler | 1
+ *-----------------------------------------------------------------------------
+ *=============================================================================
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f0xx_system
+ * @{
+ */
+
+/** @addtogroup STM32F0xx_System_Private_Includes
+ * @{
+ */
+
+#include "stm32f0xx.h"
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F0xx_System_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F0xx_System_Private_Defines
+ * @{
+ */
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE ((uint32_t)8000000) /*!< Default value of the External oscillator in Hz.
+ This value can be provided and adapted by the user application. */
+#endif /* HSE_VALUE */
+
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE ((uint32_t)8000000) /*!< Default value of the Internal oscillator in Hz.
+ This value can be provided and adapted by the user application. */
+#endif /* HSI_VALUE */
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F0xx_System_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F0xx_System_Private_Variables
+ * @{
+ */
+ /* This variable is updated in three ways:
+ 1) by calling CMSIS function SystemCoreClockUpdate()
+ 2) by calling HAL API function HAL_RCC_GetHCLKFreq()
+ 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+ Note: If you use this function to configure the system clock there is no need to
+ call the 2 first functions listed above, since SystemCoreClock variable is
+ updated automatically.
+ */
+uint32_t SystemCoreClock = 8000000;
+
+__IO const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F0xx_System_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F0xx_System_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Setup the microcontroller system.
+ * Initialize the default HSI clock source, vector table location and the PLL configuration is reset.
+ * @param None
+ * @retval None
+ */
+void SystemInit(void)
+{
+ /* Reset the RCC clock configuration to the default reset state ------------*/
+ /* Set HSION bit */
+ RCC->CR |= (uint32_t)0x00000001;
+
+#if defined (STM32F051x8) || defined (STM32F058x8)
+ /* Reset SW[1:0], HPRE[3:0], PPRE[2:0], ADCPRE and MCOSEL[2:0] bits */
+ RCC->CFGR &= (uint32_t)0xF8FFB80C;
+#else
+ /* Reset SW[1:0], HPRE[3:0], PPRE[2:0], ADCPRE, MCOSEL[2:0], MCOPRE[2:0] and PLLNODIV bits */
+ RCC->CFGR &= (uint32_t)0x08FFB80C;
+#endif /* STM32F051x8 or STM32F058x8 */
+
+ /* Reset HSEON, CSSON and PLLON bits */
+ RCC->CR &= (uint32_t)0xFEF6FFFF;
+
+ /* Reset HSEBYP bit */
+ RCC->CR &= (uint32_t)0xFFFBFFFF;
+
+ /* Reset PLLSRC, PLLXTPRE and PLLMUL[3:0] bits */
+ RCC->CFGR &= (uint32_t)0xFFC0FFFF;
+
+ /* Reset PREDIV[3:0] bits */
+ RCC->CFGR2 &= (uint32_t)0xFFFFFFF0;
+
+#if defined (STM32F072xB) || defined (STM32F078xx)
+ /* Reset USART2SW[1:0], USART1SW[1:0], I2C1SW, CECSW, USBSW and ADCSW bits */
+ RCC->CFGR3 &= (uint32_t)0xFFFCFE2C;
+#elif defined (STM32F071xB)
+ /* Reset USART2SW[1:0], USART1SW[1:0], I2C1SW, CECSW and ADCSW bits */
+ RCC->CFGR3 &= (uint32_t)0xFFFFCEAC;
+#elif defined (STM32F091xC) || defined (STM32F098xx)
+ /* Reset USART3SW[1:0], USART2SW[1:0], USART1SW[1:0], I2C1SW, CECSW and ADCSW bits */
+ RCC->CFGR3 &= (uint32_t)0xFFF0FEAC;
+#elif defined (STM32F030x6) || defined (STM32F030x8) || defined (STM32F031x6) || defined (STM32F038xx) || defined (STM32F030xC)
+ /* Reset USART1SW[1:0], I2C1SW and ADCSW bits */
+ RCC->CFGR3 &= (uint32_t)0xFFFFFEEC;
+#elif defined (STM32F051x8) || defined (STM32F058xx)
+ /* Reset USART1SW[1:0], I2C1SW, CECSW and ADCSW bits */
+ RCC->CFGR3 &= (uint32_t)0xFFFFFEAC;
+#elif defined (STM32F042x6) || defined (STM32F048xx)
+ /* Reset USART1SW[1:0], I2C1SW, CECSW, USBSW and ADCSW bits */
+ RCC->CFGR3 &= (uint32_t)0xFFFFFE2C;
+#elif defined (STM32F070x6) || defined (STM32F070xB)
+ /* Reset USART1SW[1:0], I2C1SW, USBSW and ADCSW bits */
+ RCC->CFGR3 &= (uint32_t)0xFFFFFE6C;
+ /* Set default USB clock to PLLCLK, since there is no HSI48 */
+ RCC->CFGR3 |= (uint32_t)0x00000080;
+#else
+ #warning "No target selected"
+#endif
+
+ /* Reset HSI14 bit */
+ RCC->CR2 &= (uint32_t)0xFFFFFFFE;
+
+ /* Disable all interrupts */
+ RCC->CIR = 0x00000000;
+
+}
+
+/**
+ * @brief Update SystemCoreClock variable according to Clock Register Values.
+ * The SystemCoreClock variable contains the core clock (HCLK), it can
+ * be used by the user application to setup the SysTick timer or configure
+ * other parameters.
+ *
+ * @note Each time the core clock (HCLK) changes, this function must be called
+ * to update SystemCoreClock variable value. Otherwise, any configuration
+ * based on this variable will be incorrect.
+ *
+ * @note - The system frequency computed by this function is not the real
+ * frequency in the chip. It is calculated based on the predefined
+ * constant and the selected clock source:
+ *
+ * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+ *
+ * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+ *
+ * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
+ * or HSI_VALUE(*) multiplied/divided by the PLL factors.
+ *
+ * (*) HSI_VALUE is a constant defined in stm32f0xx_hal.h file (default value
+ * 8 MHz) but the real value may vary depending on the variations
+ * in voltage and temperature.
+ *
+ * (**) HSE_VALUE is a constant defined in stm32f0xx_hal.h file (default value
+ * 8 MHz), user has to ensure that HSE_VALUE is same as the real
+ * frequency of the crystal used. Otherwise, this function may
+ * have wrong result.
+ *
+ * - The result of this function could be not correct when using fractional
+ * value for HSE crystal.
+ *
+ * @param None
+ * @retval None
+ */
+void SystemCoreClockUpdate (void)
+{
+ uint32_t tmp = 0, pllmull = 0, pllsource = 0, predivfactor = 0;
+
+ /* Get SYSCLK source -------------------------------------------------------*/
+ tmp = RCC->CFGR & RCC_CFGR_SWS;
+
+ switch (tmp)
+ {
+ case RCC_CFGR_SWS_HSI: /* HSI used as system clock */
+ SystemCoreClock = HSI_VALUE;
+ break;
+ case RCC_CFGR_SWS_HSE: /* HSE used as system clock */
+ SystemCoreClock = HSE_VALUE;
+ break;
+ case RCC_CFGR_SWS_PLL: /* PLL used as system clock */
+ /* Get PLL clock source and multiplication factor ----------------------*/
+ pllmull = RCC->CFGR & RCC_CFGR_PLLMUL;
+ pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
+ pllmull = ( pllmull >> 18) + 2;
+ predivfactor = (RCC->CFGR2 & RCC_CFGR2_PREDIV) + 1;
+
+ if (pllsource == RCC_CFGR_PLLSRC_HSE_PREDIV)
+ {
+ /* HSE used as PLL clock source : SystemCoreClock = HSE/PREDIV * PLLMUL */
+ SystemCoreClock = (HSE_VALUE/predivfactor) * pllmull;
+ }
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+ else if (pllsource == RCC_CFGR_PLLSRC_HSI48_PREDIV)
+ {
+ /* HSI48 used as PLL clock source : SystemCoreClock = HSI48/PREDIV * PLLMUL */
+ SystemCoreClock = (HSI48_VALUE/predivfactor) * pllmull;
+ }
+#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx */
+ else
+ {
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) || \
+ defined(STM32F078xx) || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+ /* HSI used as PLL clock source : SystemCoreClock = HSI/PREDIV * PLLMUL */
+ SystemCoreClock = (HSI_VALUE/predivfactor) * pllmull;
+#else
+ /* HSI used as PLL clock source : SystemCoreClock = HSI/2 * PLLMUL */
+ SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
+#endif /* STM32F042x6 || STM32F048xx || STM32F070x6 ||
+ STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB ||
+ STM32F091xC || STM32F098xx || STM32F030xC */
+ }
+ break;
+ default: /* HSI used as system clock */
+ SystemCoreClock = HSI_VALUE;
+ break;
+ }
+ /* Compute HCLK clock frequency ----------------*/
+ /* Get HCLK prescaler */
+ tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
+ /* HCLK clock frequency */
+ SystemCoreClock >>= tmp;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/src/stm32f0xx_hal.c b/f0/src/stm32f0xx_hal.c
new file mode 100755
index 0000000000000000000000000000000000000000..7ce22d5f0af1f5bfe59eba737d2822a321164739
--- /dev/null
+++ b/f0/src/stm32f0xx_hal.c
@@ -0,0 +1,430 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal.c
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief HAL module driver.
+ * This is the common part of the HAL initialization
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The common HAL driver contains a set of generic and common APIs that can be
+ used by the PPP peripheral drivers and the user to start using the HAL.
+ [..]
+ The HAL contains two APIs categories:
+ (+) HAL Initialization and de-initialization functions
+ (+) HAL Control functions
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup HAL HAL module driver
+ * @brief HAL module driver.
+ * @{
+ */
+
+#ifdef HAL_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup HAL_Private Constants
+ * @{
+ */
+/**
+ * @brief STM32F0xx HAL Driver version number V1.2.1
+ */
+#define __STM32F0xx_HAL_VERSION_MAIN (0x01) /*!< [31:24] main version */
+#define __STM32F0xx_HAL_VERSION_SUB1 (0x02) /*!< [23:16] sub1 version */
+#define __STM32F0xx_HAL_VERSION_SUB2 (0x01) /*!< [15:8] sub2 version */
+#define __STM32F0xx_HAL_VERSION_RC (0x00) /*!< [7:0] release candidate */
+#define __STM32F0xx_HAL_VERSION ((__STM32F0xx_HAL_VERSION_MAIN << 24)\
+ |(__STM32F0xx_HAL_VERSION_SUB1 << 16)\
+ |(__STM32F0xx_HAL_VERSION_SUB2 << 8 )\
+ |(__STM32F0xx_HAL_VERSION_RC))
+
+#define IDCODE_DEVID_MASK ((uint32_t)0x00000FFF)
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup HAL_Private_Variables HAL Private Variables
+ * @{
+ */
+static __IO uint32_t uwTick;
+/**
+ * @}
+ */
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup HAL_Exported_Functions HAL Exported Functions
+ * @{
+ */
+
+/** @defgroup HAL_Exported_Functions_Group1 Initialization and de-initialization Functions
+ * @brief Initialization and de-initialization functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Initializes the Flash interface, the NVIC allocation and initial clock
+ configuration. It initializes the source of time base also when timeout
+ is needed and the backup domain when enabled.
+ (+) de-Initializes common part of the HAL.
+ (+) Configure The time base source to have 1ms time base with a dedicated
+ Tick interrupt priority.
+ (++) Systick timer is used by default as source of time base, but user
+ can eventually implement his proper time base source (a general purpose
+ timer for example or other time source), keeping in mind that Time base
+ duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and
+ handled in milliseconds basis.
+ (++) Time base configuration function (HAL_InitTick ()) is called automatically
+ at the beginning of the program after reset by HAL_Init() or at any time
+ when clock is configured, by HAL_RCC_ClockConfig().
+ (++) Source of time base is configured to generate interrupts at regular
+ time intervals. Care must be taken if HAL_Delay() is called from a
+ peripheral ISR process, the Tick interrupt line must have higher priority
+ (numerically lower) than the peripheral interrupt. Otherwise the caller
+ ISR process will be blocked.
+ (++) functions affecting time base configurations are declared as __Weak
+ to make override possible in case of other implementations in user file.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief This function configures the Flash prefetch,
+ * Configures time base source, NVIC and Low level hardware
+ * @note This function is called at the beginning of program after reset and before
+ * the clock configuration
+ * @note The time base configuration is based on HSI clock when exiting from Reset.
+ * Once done, time base tick start incrementing.
+ * In the default implementation,Systick is used as source of time base.
+ * The tick variable is incremented each 1ms in its ISR.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_Init(void)
+{
+ /* Configure Flash prefetch */
+#if (PREFETCH_ENABLE != 0)
+ __HAL_FLASH_PREFETCH_BUFFER_ENABLE();
+#endif /* PREFETCH_ENABLE */
+
+ /* Use systick as time base source and configure 1ms tick (default clock after Reset is HSI) */
+
+ HAL_InitTick(TICK_INT_PRIORITY);
+
+ /* Init the low level hardware */
+ HAL_MspInit();
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief This function de-Initializes common part of the HAL and stops the source
+ * of time base.
+ * @note This function is optional.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DeInit(void)
+{
+ /* Reset of all peripherals */
+ __APB1_FORCE_RESET();
+ __APB1_RELEASE_RESET();
+
+ __APB2_FORCE_RESET();
+ __APB2_RELEASE_RESET();
+
+ __AHB_FORCE_RESET();
+ __AHB_RELEASE_RESET();
+
+ /* De-Init the low level hardware */
+ HAL_MspDeInit();
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the MSP.
+ * @retval None
+ */
+__weak void HAL_MspInit(void)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes the MSP.
+ * @retval None
+ */
+__weak void HAL_MspDeInit(void)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief This function configures the source of the time base.
+ * The time source is configured to have 1ms time base with a dedicated
+ * Tick interrupt priority.
+ * @note This function is called automatically at the beginning of program after
+ * reset by HAL_Init() or at any time when clock is reconfigured by HAL_RCC_ClockConfig().
+ * @note In the default implementation, SysTick timer is the source of time base.
+ * It is used to generate interrupts at regular time intervals.
+ * Care must be taken if HAL_Delay() is called from a peripheral ISR process,
+ * The the SysTick interrupt must have higher priority (numerically lower)
+ * than the peripheral interrupt. Otherwise the caller ISR process will be blocked.
+ * The function is declared as __Weak to be overwritten in case of other
+ * implementation in user file.
+ * @param TickPriority: Tick interrupt priority.
+ * @retval HAL status
+ */
+__weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority)
+{
+ /*Configure the SysTick to have interrupt in 1ms time basis*/
+ HAL_SYSTICK_Config(HAL_RCC_GetHCLKFreq()/1000);
+
+ /*Configure the SysTick IRQ priority */
+ HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority ,0);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_Exported_Functions_Group2 HAL Control functions
+ * @brief HAL Control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### HAL Control functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Provide a tick value in millisecond
+ (+) Provide a blocking delay in millisecond
+ (+) Suspend the time base source interrupt
+ (+) Resume the time base source interrupt
+ (+) Get the HAL API driver version
+ (+) Get the device identifier
+ (+) Get the device revision identifier
+ (+) Enable/Disable Debug module during Sleep mode
+ (+) Enable/Disable Debug module during STOP mode
+ (+) Enable/Disable Debug module during STANDBY mode
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief This function is called to increment a global variable "uwTick"
+ * used as application time base.
+ * @note In the default implementation, this variable is incremented each 1ms
+ * in Systick ISR.
+ * @note This function is declared as __weak to be overwritten in case of other
+ * implementations in user file.
+ * @retval None
+ */
+__weak void HAL_IncTick(void)
+{
+ uwTick++;
+}
+
+/**
+ * @brief Povides a tick value in millisecond.
+ * @note The function is declared as __Weak to be overwritten in case of other
+ * implementations in user file.
+ * @retval tick value
+ */
+__weak uint32_t HAL_GetTick(void)
+{
+ return uwTick;
+}
+
+/**
+ * @brief Suspend Tick increment.
+ * @note In the default implementation , SysTick timer is the source of time base. It is
+ * used to generate interrupts at regular time intervals. Once HAL_SuspendTick()
+ * is called, the the SysTick interrupt will be disabled and so Tick increment
+ * is suspended.
+ * @note This function is declared as __weak to be overwritten in case of other
+ * implementations in user file.
+ * @retval None
+ */
+__weak void HAL_SuspendTick(void)
+
+{
+ /* Disable SysTick Interrupt */
+ SysTick->CTRL &= ~SysTick_CTRL_TICKINT_Msk;
+
+}
+
+/**
+ * @brief Resume Tick increment.
+ * @note In the default implementation , SysTick timer is the source of time base. It is
+ * used to generate interrupts at regular time intervals. Once HAL_ResumeTick()
+ * is called, the the SysTick interrupt will be enabled and so Tick increment
+ * is resumed.
+ * The function is declared as __Weak to be overwritten in case of other
+ * implementations in user file.
+ * @retval None
+ */
+__weak void HAL_ResumeTick(void)
+{
+ /* Enable SysTick Interrupt */
+ SysTick->CTRL |= SysTick_CTRL_TICKINT_Msk;
+
+}
+
+/**
+ * @brief This function provides accurate delay (in milliseconds) based
+ * on variable incremented.
+ * @note In the default implementation , SysTick timer is the source of time base.
+ * It is used to generate interrupts at regular time intervals where uwTick
+ * is incremented.
+ * @note ThiS function is declared as __weak to be overwritten in case of other
+ * implementations in user file.
+ * @param Delay: specifies the delay time length, in milliseconds.
+ * @retval None
+ */
+__weak void HAL_Delay(__IO uint32_t Delay)
+{
+ uint32_t tickstart = 0;
+ tickstart = HAL_GetTick();
+ while((HAL_GetTick() - tickstart) < Delay)
+ {
+ }
+}
+
+/**
+ * @brief This method returns the HAL revision
+ * @retval version : 0xXYZR (8bits for each decimal, R for RC)
+ */
+uint32_t HAL_GetHalVersion(void)
+{
+ return __STM32F0xx_HAL_VERSION;
+}
+
+/**
+ * @brief Returns the device revision identifier.
+ * @retval Device revision identifier
+ */
+uint32_t HAL_GetREVID(void)
+{
+ return((DBGMCU->IDCODE) >> 16);
+}
+
+/**
+ * @brief Returns the device identifier.
+ * @retval Device identifier
+ */
+uint32_t HAL_GetDEVID(void)
+{
+ return((DBGMCU->IDCODE) & IDCODE_DEVID_MASK);
+}
+
+/**
+ * @brief Enable the Debug Module during STOP mode
+ * @retval None
+ */
+void HAL_EnableDBGStopMode(void)
+{
+ SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
+}
+
+/**
+ * @brief Disable the Debug Module during STOP mode
+ * @retval None
+ */
+void HAL_DisableDBGStopMode(void)
+{
+ CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
+}
+
+/**
+ * @brief Enable the Debug Module during STANDBY mode
+ * @retval None
+ */
+void HAL_EnableDBGStandbyMode(void)
+{
+ SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
+}
+
+/**
+ * @brief Disable the Debug Module during STANDBY mode
+ * @retval None
+ */
+void HAL_DisableDBGStandbyMode(void)
+{
+ CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/src/stm32f0xx_hal_adc.c b/f0/src/stm32f0xx_hal_adc.c
new file mode 100755
index 0000000000000000000000000000000000000000..15749a3d114ef26a6d0a0ccb2e23ccb4e72ad882
--- /dev/null
+++ b/f0/src/stm32f0xx_hal_adc.c
@@ -0,0 +1,1865 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_adc.c
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief This file provides firmware functions to manage the following
+ * functionalities of the Analog to Digital Convertor (ADC)
+ * peripheral:
+ * + Initialization and de-initialization functions
+ * ++ Initialization and Configuration of ADC
+ * + Operation functions
+ * ++ Start, stop, get result of conversions of regular group,
+ * using 3 possible modes: polling, interruption or DMA.
+ * + Control functions
+ * ++ Analog Watchdog configuration
+ * ++ Channels configuration on regular group
+ * + State functions
+ * ++ ADC state machine management
+ * ++ Interrupts and flags management
+ *
+ @verbatim
+ ==============================================================================
+ ##### ADC specific features #####
+ ==============================================================================
+ [..]
+ (#) 12-bit, 10-bit, 8-bit or 6-bit configurable resolution
+
+ (#) Interrupt generation at the end of regular conversion and in case of
+ analog watchdog or overrun events.
+
+ (#) Single and continuous conversion modes.
+
+ (#) Scan mode for automatic conversion of channel 0 to channel 'n'.
+
+ (#) Data alignment with in-built data coherency.
+
+ (#) Programmable sampling time.
+
+ (#) ADC conversion group Regular.
+
+ (#) External trigger (timer or EXTI) with configurable polarity.
+
+ (#) DMA request generation for transfer of conversions data of regular group.
+
+ (#) ADC calibration
+
+ (#) ADC supply requirements: 2.4 V to 3.6 V at full speed and down to 1.8 V at
+ slower speed.
+
+ (#) ADC input range: from Vref minus (connected to Vssa) to Vref plus (connected to
+ Vdda or to an external voltage reference).
+
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+
+ (#) Enable the ADC interface
+ (++) As prerequisite, into HAL_ADC_MspInit(), ADC clock must be configured
+ at RCC top level: clock source and clock prescaler.
+ (++)Two possible clock sources: synchronous clock derived from APB clock
+ or asynchronous clock derived from ADC dedicated HSI RC oscillator
+ 14MHz.
+ (++)Example:
+ __ADC1_CLK_ENABLE(); (mandatory)
+
+ HI14 enable or let under control of ADC: (optional)
+
+ RCC_OscInitTypeDef RCC_OscInitStructure;
+ RCC_OscInitStructure.OscillatorType = RCC_OSCILLATORTYPE_HSI14;
+ RCC_OscInitStructure.HSI14CalibrationValue = RCC_HSI14CALIBRATION_DEFAULT;
+ RCC_OscInitStructure.HSI14State = RCC_HSI14_ADC_CONTROL;
+ RCC_OscInitStructure.PLL... (optional if used for system clock)
+ HAL_RCC_OscConfig(&RCC_OscInitStructure);
+
+ Parameter "HSI14State" must be set either:
+ - to "...HSI14State = RCC_HSI14_ADC_CONTROL" to let the ADC control
+ the HSI14 oscillator enable/disable (if not used to supply the main
+ system clock): feature used if ADC mode LowPowerAutoPowerOff is
+ enabled.
+ - to "...HSI14State = RCC_HSI14_ON" to maintain the HSI14 oscillator
+ always enabled: can be used to supply the main system clock.
+
+ (#) ADC pins configuration
+ (++) Enable the clock for the ADC GPIOs using the following function:
+ __GPIOx_CLK_ENABLE();
+ (++) Configure these ADC pins in analog mode using HAL_GPIO_Init();
+
+ (#) Configure the ADC parameters (conversion resolution, data alignment,
+ continuous mode, ...) using the HAL_ADC_Init() function.
+
+ (#) Activate the ADC peripheral using one of the start functions:
+ HAL_ADC_Start(), HAL_ADC_Start_IT(), HAL_ADC_Start_DMA().
+
+ *** Channels configuration to regular group ***
+ ================================================
+ [..]
+ (+) To configure the ADC regular group features, use
+ HAL_ADC_Init() and HAL_ADC_ConfigChannel() functions.
+ (+) To activate the continuous mode, use the HAL_ADC_Init() function.
+ (+) To read the ADC converted values, use the HAL_ADC_GetValue() function.
+
+ *** DMA for regular configuration ***
+ =============================================================
+ [..]
+ (+) To enable the DMA mode for regular group, use the
+ HAL_ADC_Start_DMA() function.
+ (+) To enable the generation of DMA requests continuously at the end of
+ the last DMA transfer, use the HAL_ADC_Init() function.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup ADC ADC HAL module driver
+ * @brief ADC HAL module driver
+ * @{
+ */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup ADC_Private_Constants ADC Private Constants
+ * @{
+ */
+
+ /* Fixed timeout values for ADC calibration, enable settling time, disable */
+ /* settling time. */
+ /* Values defined to be higher than worst cases: low clock frequency, */
+ /* maximum prescaler. */
+ /* Ex of profile low frequency : Clock source at 0.1 MHz, ADC clock */
+ /* prescaler 4, sampling time 7.5 ADC clock cycles, resolution 12 bits. */
+ /* Unit: ms */
+ #define ADC_ENABLE_TIMEOUT ((uint32_t) 2)
+ #define ADC_DISABLE_TIMEOUT ((uint32_t) 2)
+ #define ADC_STOP_CONVERSION_TIMEOUT ((uint32_t) 2)
+
+ /* Delay for temperature sensor stabilization time. */
+ /* Maximum delay is 10us (refer to device datasheet, parameter tSTART). */
+ /* Delay in CPU cycles, fixed to worst case: maximum CPU frequency 48MHz to */
+ /* have the minimum number of CPU cycles to fulfill this delay. */
+ #define ADC_TEMPSENSOR_DELAY_CPU_CYCLES ((uint32_t) 480)
+
+ /* Delay for ADC stabilization time. */
+ /* Maximum delay is 1us (refer to device datasheet, parameter tSTAB). */
+ /* Delay in CPU cycles, fixed to worst case: maximum CPU frequency 48MHz to */
+ /* have the minimum number of CPU cycles to fulfill this delay. */
+ #define ADC_STAB_DELAY_CPU_CYCLES ((uint32_t)48)
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup ADC_Private_Functions ADC Private Functions
+ * @{
+ */
+static HAL_StatusTypeDef ADC_Enable(ADC_HandleTypeDef* hadc);
+static HAL_StatusTypeDef ADC_Disable(ADC_HandleTypeDef* hadc);
+static HAL_StatusTypeDef ADC_ConversionStop(ADC_HandleTypeDef* hadc);
+static void ADC_DMAConvCplt(DMA_HandleTypeDef *hdma);
+static void ADC_DMAHalfConvCplt(DMA_HandleTypeDef *hdma);
+static void ADC_DMAError(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup ADC_Exported_Functions ADC Exported Functions
+ * @{
+ */
+
+/** @defgroup ADC_Exported_Functions_Group1 Initialization/de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Initialize and configure the ADC.
+ (+) De-initialize the ADC
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the ADC peripheral and regular group according to
+ * parameters specified in structure "ADC_InitTypeDef".
+ * @note As prerequisite, ADC clock must be configured at RCC top level
+ * depending on both possible clock sources: APB clock of HSI clock.
+ * See commented example code below that can be copied and uncommented
+ * into HAL_ADC_MspInit().
+ * @note Possibility to update parameters on the fly:
+ * This function initializes the ADC MSP (HAL_ADC_MspInit()) only when
+ * coming from ADC state reset. Following calls to this function can
+ * be used to reconfigure some parameters of ADC_InitTypeDef
+ * structure on the fly, without modifying MSP configuration. If ADC
+ * MSP has to be modified again, HAL_ADC_DeInit() must be called
+ * before HAL_ADC_Init().
+ * The setting of these parameters is conditioned to ADC state.
+ * For parameters constraints, see comments of structure
+ * "ADC_InitTypeDef".
+ * @note This function configures the ADC within 2 scopes: scope of entire
+ * ADC and scope of regular group. For parameters details, see comments
+ * of structure "ADC_InitTypeDef".
+ * @param hadc: ADC handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef* hadc)
+{
+ HAL_StatusTypeDef tmpHALStatus = HAL_OK;
+ uint32_t tmpCFGR1 = 0;
+
+ /* Check ADC handle */
+ if(hadc == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
+ assert_param(IS_ADC_CLOCKPRESCALER(hadc->Init.ClockPrescaler));
+ assert_param(IS_ADC_RESOLUTION(hadc->Init.Resolution));
+ assert_param(IS_ADC_DATA_ALIGN(hadc->Init.DataAlign));
+ assert_param(IS_ADC_SCAN_MODE(hadc->Init.ScanConvMode));
+ assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode));
+ assert_param(IS_FUNCTIONAL_STATE(hadc->Init.DiscontinuousConvMode));
+ assert_param(IS_ADC_EXTTRIG_EDGE(hadc->Init.ExternalTrigConvEdge));
+ assert_param(IS_ADC_EXTTRIG(hadc->Init.ExternalTrigConv));
+ assert_param(IS_FUNCTIONAL_STATE(hadc->Init.DMAContinuousRequests));
+ assert_param(IS_ADC_EOC_SELECTION(hadc->Init.EOCSelection));
+ assert_param(IS_ADC_OVERRUN(hadc->Init.Overrun));
+ assert_param(IS_FUNCTIONAL_STATE(hadc->Init.LowPowerAutoWait));
+ assert_param(IS_FUNCTIONAL_STATE(hadc->Init.LowPowerAutoPowerOff));
+
+ /* As prerequisite, into HAL_ADC_MspInit(), ADC clock must be configured */
+ /* at RCC top level depending on both possible clock sources: */
+ /* APB clock or HSI clock. */
+ /* Refer to header of this file for more details on clock enabling procedure*/
+
+ /* Actions performed only if ADC is coming from state reset: */
+ /* - Initialization of ADC MSP */
+ /* - ADC voltage regulator enable */
+ if (hadc->State == HAL_ADC_STATE_RESET)
+ {
+ /* Init the low level hardware */
+ HAL_ADC_MspInit(hadc);
+
+ }
+
+ /* Configuration of ADC parameters if previous preliminary actions are */
+ /* correctly completed. */
+ /* and if there is no conversion on going on regular group (ADC can be */
+ /* enabled anyway, in case of call of this function to update a parameter */
+ /* on the fly). */
+ if ((hadc->State != HAL_ADC_STATE_ERROR) &&
+ (__HAL_ADC_IS_CONVERSION_ONGOING_REGULAR(hadc) == RESET) )
+ {
+ /* Initialize the ADC state */
+ hadc->State = HAL_ADC_STATE_BUSY;
+
+ /* Parameters update conditioned to ADC state: */
+ /* Parameters that can be updated only when ADC is disabled: */
+ /* - ADC clock mode */
+ /* - ADC clock prescaler */
+ if (__HAL_ADC_IS_ENABLED(hadc) == RESET)
+ {
+ /* Some parameters of this register are not reset, since they are set */
+ /* by other functions and must be kept in case of usage of this */
+ /* function on the fly (update of a parameter of ADC_InitTypeDef */
+ /* without needing to reconfigure all other ADC groups/channels */
+ /* parameters): */
+ /* - internal measurement paths: Vbat, temperature sensor, Vref */
+ /* (set into HAL_ADC_ConfigChannel() ) */
+
+ /* Reset configuration of ADC configuration register CFGR2: */
+ /* - ADC clock mode: CKMODE */
+ hadc->Instance->CFGR2 &= ~(ADC_CFGR2_CKMODE);
+
+ /* Configuration of ADC clock mode: clock source AHB or HSI with */
+ /* selectable prescaler */
+ hadc->Instance->CFGR2 |= hadc->Init.ClockPrescaler;
+ }
+
+ /* Configuration of ADC: */
+ /* - discontinuous mode */
+ /* - LowPowerAutoWait mode */
+ /* - LowPowerAutoPowerOff mode */
+ /* - continuous conversion mode */
+ /* - overrun */
+ /* - external trigger to start conversion */
+ /* - external trigger polarity */
+ /* - data alignment */
+ /* - resolution */
+ /* - scan direction */
+ /* - DMA continuous request */
+ hadc->Instance->CFGR1 &= ~( ADC_CFGR1_DISCEN |
+ ADC_CFGR1_AUTOFF |
+ ADC_CFGR1_AUTDLY |
+ ADC_CFGR1_CONT |
+ ADC_CFGR1_OVRMOD |
+ ADC_CFGR1_EXTSEL |
+ ADC_CFGR1_EXTEN |
+ ADC_CFGR1_ALIGN |
+ ADC_CFGR1_RES |
+ ADC_CFGR1_SCANDIR |
+ ADC_CFGR1_DMACFG );
+
+ tmpCFGR1 |= (__HAL_ADC_CFGR1_AUTOWAIT(hadc->Init.LowPowerAutoWait) |
+ __HAL_ADC_CFGR1_AUTOOFF(hadc->Init.LowPowerAutoPowerOff) |
+ __HAL_ADC_CFGR1_CONTINUOUS(hadc->Init.ContinuousConvMode) |
+ __HAL_ADC_CFGR1_OVERRUN(hadc->Init.Overrun) |
+ hadc->Init.DataAlign |
+ hadc->Init.Resolution |
+ __HAL_ADC_CFGR1_SCANDIR(hadc->Init.ScanConvMode) |
+ __HAL_ADC_CFGR1_DMACONTREQ(hadc->Init.DMAContinuousRequests) );
+
+ /* Enable discontinuous mode only if continuous mode is disabled */
+ if ((hadc->Init.DiscontinuousConvMode == ENABLE) &&
+ (hadc->Init.ContinuousConvMode == DISABLE) )
+ {
+ /* Enable discontinuous mode of regular group */
+ tmpCFGR1 |= ADC_CFGR1_DISCEN;
+ }
+
+ /* Enable external trigger if trigger selection is different of software */
+ /* start. */
+ /* @Note: This configuration keeps the hardware feature of parameter */
+ /* ExternalTrigConvEdge "trigger edge none" equivalent to */
+ /* software start. */
+ if (hadc->Init.ExternalTrigConv != ADC_SOFTWARE_START)
+ {
+ tmpCFGR1 |= ( hadc->Init.ExternalTrigConv |
+ hadc->Init.ExternalTrigConvEdge );
+ }
+
+ /* Update ADC configuration register with previous settings */
+ hadc->Instance->CFGR1 |= tmpCFGR1;
+
+ /* Check back that ADC registers have effectively been configured to */
+ /* ensure of no potential problem of ADC core IP clocking. */
+ /* Check through register CFGR1 (excluding analog watchdog configuration: */
+ /* set into separate dedicated function). */
+ if ((hadc->Instance->CFGR1 & ~(ADC_CFGR1_AWDCH | ADC_CFGR1_AWDEN | ADC_CFGR1_AWDSGL))
+ == tmpCFGR1)
+ {
+ /* Set ADC error code to none */
+ __HAL_ADC_CLEAR_ERRORCODE(hadc);
+
+ /* Initialize the ADC state */
+ hadc->State = HAL_ADC_STATE_READY;
+ }
+ else
+ {
+ /* Update ADC state machine to error */
+ hadc->State = HAL_ADC_STATE_ERROR;
+
+ /* Set ADC error code to ADC IP internal error */
+ hadc->ErrorCode |= HAL_ADC_ERROR_INTERNAL;
+
+ tmpHALStatus = HAL_ERROR;
+ }
+
+ }
+ else
+ {
+ /* Update ADC state machine to error */
+ hadc->State = HAL_ADC_STATE_ERROR;
+
+ tmpHALStatus = HAL_ERROR;
+ }
+
+ /* Return function status */
+ return tmpHALStatus;
+}
+
+
+/**
+ * @brief Deinitialize the ADC peripheral registers to their default reset
+ * values, with deinitialization of the ADC MSP.
+ * @note For devices with several ADCs: reset of ADC common registers is done
+ * only if all ADCs sharing the same common group are disabled.
+ * If this is not the case, reset of these common parameters reset is
+ * bypassed without error reporting: it can be the intended behaviour in
+ * case of reset of a single ADC while the other ADCs sharing the same
+ * common group is still running.
+ * @param hadc: ADC handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef* hadc)
+{
+ HAL_StatusTypeDef tmpHALStatus = HAL_OK;
+
+ /* Check ADC handle */
+ if(hadc == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
+
+ /* Change ADC state */
+ hadc->State = HAL_ADC_STATE_BUSY;
+
+ /* Stop potential conversion on going, on regular group */
+ tmpHALStatus = ADC_ConversionStop(hadc);
+
+ /* Disable ADC peripheral if conversions are effectively stopped */
+ if (tmpHALStatus != HAL_ERROR)
+ {
+ /* Disable the ADC peripheral */
+ tmpHALStatus = ADC_Disable(hadc);
+
+ /* Check if ADC is effectively disabled */
+ if (tmpHALStatus != HAL_ERROR)
+ {
+ /* Change ADC state */
+ hadc->State = HAL_ADC_STATE_READY;
+ }
+ }
+
+
+ /* Configuration of ADC parameters if previous preliminary actions are */
+ /* correctly completed. */
+ if (tmpHALStatus != HAL_ERROR)
+ {
+
+ /* ========== Reset ADC registers ========== */
+ /* Reset register IER */
+ __HAL_ADC_DISABLE_IT(hadc, (ADC_IT_AWD | ADC_IT_OVR |
+ ADC_IT_EOS | ADC_IT_EOC |
+ ADC_IT_EOSMP | ADC_IT_RDY ) );
+
+ /* Reset register ISR */
+ __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_AWD | ADC_FLAG_OVR |
+ ADC_FLAG_EOS | ADC_FLAG_EOC |
+ ADC_FLAG_EOSMP | ADC_FLAG_RDY ) );
+
+ /* Reset register CR */
+ /* Bits ADC_CR_ADCAL, ADC_CR_ADSTP, ADC_CR_ADSTART are in access mode */
+ /* "read-set": no direct reset applicable. */
+
+ /* Reset register CFGR1 */
+ hadc->Instance->CFGR1 &= ~(ADC_CFGR1_AWDCH | ADC_CFGR1_AWDEN | ADC_CFGR1_AWDSGL | ADC_CFGR1_DISCEN |
+ ADC_CFGR1_AUTOFF | ADC_CFGR1_WAIT | ADC_CFGR1_CONT | ADC_CFGR1_OVRMOD |
+ ADC_CFGR1_EXTEN | ADC_CFGR1_EXTSEL | ADC_CFGR1_ALIGN | ADC_CFGR1_RES |
+ ADC_CFGR1_SCANDIR | ADC_CFGR1_DMACFG | ADC_CFGR1_DMAEN );
+
+ /* Reset register CFGR2 */
+ /* @Note: Update of ADC clock mode is conditioned to ADC state disabled: */
+ /* already done above. */
+ hadc->Instance->CFGR2 &= ~ADC_CFGR2_CKMODE;
+
+ /* Reset register SMPR */
+ hadc->Instance->SMPR &= ~ADC_SMPR_SMP;
+
+ /* Reset register TR1 */
+ hadc->Instance->TR &= ~(ADC_TR_HT | ADC_TR_LT);
+
+ /* Reset register CHSELR */
+ hadc->Instance->CHSELR &= ~(ADC_CHSELR_CHSEL18 | ADC_CHSELR_CHSEL17 | ADC_CHSELR_CHSEL16 |
+ ADC_CHSELR_CHSEL15 | ADC_CHSELR_CHSEL14 | ADC_CHSELR_CHSEL13 | ADC_CHSELR_CHSEL12 |
+ ADC_CHSELR_CHSEL11 | ADC_CHSELR_CHSEL10 | ADC_CHSELR_CHSEL9 | ADC_CHSELR_CHSEL8 |
+ ADC_CHSELR_CHSEL7 | ADC_CHSELR_CHSEL6 | ADC_CHSELR_CHSEL5 | ADC_CHSELR_CHSEL4 |
+ ADC_CHSELR_CHSEL3 | ADC_CHSELR_CHSEL2 | ADC_CHSELR_CHSEL1 | ADC_CHSELR_CHSEL0 );
+
+ /* Reset register DR */
+ /* bits in access mode read only, no direct reset applicable*/
+
+ /* Reset register CCR */
+ ADC->CCR &= ~( ADC_CCR_VBATEN |
+ ADC_CCR_TSEN |
+ ADC_CCR_VREFEN );
+
+ /* ========== Hard reset ADC peripheral ========== */
+ /* Performs a global reset of the entire ADC peripheral: ADC state is */
+ /* forced to a similar state after device power-on. */
+ /* If needed, copy-paste and uncomment the following reset code into */
+ /* function "void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)": */
+ /* */
+ /* __ADC1_FORCE_RESET() */
+ /* __ADC1_RELEASE_RESET() */
+
+ /* DeInit the low level hardware */
+ HAL_ADC_MspDeInit(hadc);
+
+ /* Set ADC error code to none */
+ __HAL_ADC_CLEAR_ERRORCODE(hadc);
+
+ /* Change ADC state */
+ hadc->State = HAL_ADC_STATE_RESET;
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hadc);
+
+ /* Return function status */
+ return tmpHALStatus;
+}
+
+
+/**
+ * @brief Initializes the ADC MSP.
+ * @param hadc: ADC handle
+ * @retval None
+ */
+__weak void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
+{
+ /* NOTE : This function should not be modified. When the callback is needed,
+ function HAL_ADC_MspInit must be implemented in the user file.
+ */
+}
+
+/**
+ * @brief DeInitializes the ADC MSP.
+ * @param hadc: ADC handle
+ * @retval None
+ */
+__weak void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
+{
+ /* NOTE : This function should not be modified. When the callback is needed,
+ function HAL_ADC_MspDeInit must be implemented in the user file.
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Exported_Functions_Group2 IO operation functions
+ * @brief IO operation functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Start conversion of regular group.
+ (+) Stop conversion of regular group.
+ (+) Poll for conversion complete on regular group.
+ (+) Poll for conversion event.
+ (+) Get result of regular channel conversion.
+ (+) Start conversion of regular group and enable interruptions.
+ (+) Stop conversion of regular group and disable interruptions.
+ (+) Handle ADC interrupt request
+ (+) Start conversion of regular group and enable DMA transfer.
+ (+) Stop conversion of regular group and disable ADC DMA transfer.
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Enables ADC, starts conversion of regular group.
+ * Interruptions enabled in this function: None.
+ * @param hadc: ADC handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef* hadc)
+{
+ HAL_StatusTypeDef tmpHALStatus = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
+
+ /* Perform ADC enable and conversion start if no conversion is on going */
+ if (__HAL_ADC_IS_CONVERSION_ONGOING_REGULAR(hadc) == RESET)
+ {
+ /* Process locked */
+ __HAL_LOCK(hadc);
+
+ /* Enable the ADC peripheral */
+ /* If low power mode AutoPowerOff is enabled, power-on/off phases are */
+ /* performed automatically by hardware. */
+ if (hadc->Init.LowPowerAutoPowerOff != ENABLE)
+ {
+ tmpHALStatus = ADC_Enable(hadc);
+ }
+
+ /* Start conversion if ADC is effectively enabled */
+ if (tmpHALStatus != HAL_ERROR)
+ {
+ /* State machine update: Change ADC state */
+ hadc->State = HAL_ADC_STATE_BUSY_REG;
+
+ /* Set ADC error code to none */
+ __HAL_ADC_CLEAR_ERRORCODE(hadc);
+
+ /* Clear regular group conversion flag and overrun flag */
+ /* (To ensure of no unknown state from potential previous ADC */
+ /* operations) */
+ __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_EOC | ADC_FLAG_EOS | ADC_FLAG_OVR));
+
+ /* Enable conversion of regular group. */
+ /* If software start has been selected, conversion starts immediately. */
+ /* If external trigger has been selected, conversion will start at next */
+ /* trigger event. */
+ hadc->Instance->CR |= ADC_CR_ADSTART;
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hadc);
+ }
+ else
+ {
+ tmpHALStatus = HAL_BUSY;
+ }
+
+ /* Return function status */
+ return tmpHALStatus;
+}
+
+/**
+ * @brief Stop ADC conversion of regular group, disable ADC peripheral.
+ * @param hadc: ADC handle
+ * @retval HAL status.
+ */
+HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef* hadc)
+{
+ HAL_StatusTypeDef tmpHALStatus = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
+
+ /* Process locked */
+ __HAL_LOCK(hadc);
+
+ /* 1. Stop potential conversion on going, on regular group */
+ tmpHALStatus = ADC_ConversionStop(hadc);
+
+ /* Disable ADC peripheral if conversions are effectively stopped */
+ if (tmpHALStatus != HAL_ERROR)
+ {
+ /* 2. Disable the ADC peripheral */
+ tmpHALStatus = ADC_Disable(hadc);
+
+ /* Check if ADC is effectively disabled */
+ if (tmpHALStatus != HAL_ERROR)
+ {
+ /* Change ADC state */
+ hadc->State = HAL_ADC_STATE_READY;
+ }
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hadc);
+
+ /* Return function status */
+ return tmpHALStatus;
+}
+
+/**
+ * @brief Wait for regular group conversion to be completed.
+ * @param hadc: ADC handle
+ * @param Timeout: Timeout value in millisecond.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout)
+{
+ uint32_t tickstart;
+ uint32_t tmp_Flag_EOC;
+
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
+
+ /* If end of conversion selected to end of sequence */
+ if (hadc->Init.EOCSelection == EOC_SEQ_CONV)
+ {
+ tmp_Flag_EOC = ADC_FLAG_EOS;
+ }
+ /* If end of conversion selected to end of each conversion */
+ else /* EOC_SINGLE_CONV */
+ {
+ tmp_Flag_EOC = (ADC_FLAG_EOC | ADC_FLAG_EOS);
+ }
+
+ /* Get timeout */
+ tickstart = HAL_GetTick();
+
+ /* Wait until End of Conversion flag is raised */
+ while(HAL_IS_BIT_CLR(hadc->Instance->ISR, tmp_Flag_EOC))
+ {
+ /* Check if timeout is disabled (set to infinite wait) */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0) || ((HAL_GetTick()-tickstart) > Timeout))
+ {
+ /* Update ADC state machine to timeout */
+ hadc->State = HAL_ADC_STATE_TIMEOUT;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hadc);
+
+ return HAL_ERROR;
+ }
+ }
+ }
+
+ /* Clear end of conversion flag of regular group if low power feature */
+ /* "LowPowerAutoWait " is disabled, to not interfere with this feature */
+ /* until data register is read using function HAL_ADC_GetValue(). */
+ if (hadc->Init.LowPowerAutoWait == DISABLE)
+ {
+ /* Clear regular group conversion flag */
+ __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_EOC | ADC_FLAG_EOS));
+ }
+
+ /* Update state machine on conversion status if not in error state */
+ if(hadc->State != HAL_ADC_STATE_ERROR)
+ {
+ /* Change ADC state */
+ hadc->State = HAL_ADC_STATE_EOC_REG;
+ }
+
+ /* Return ADC state */
+ return HAL_OK;
+}
+
+/**
+ * @brief Poll for conversion event.
+ * @param hadc: ADC handle
+ * @param EventType: the ADC event type.
+ * This parameter can be one of the following values:
+ * @arg AWD_EVENT: ADC Analog watchdog event
+ * @arg OVR_EVENT: ADC Overrun event
+ * @param Timeout: Timeout value in millisecond.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef* hadc, uint32_t EventType, uint32_t Timeout)
+{
+ uint32_t tickstart=0;
+
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
+ assert_param(IS_ADC_EVENT_TYPE(EventType));
+
+ tickstart = HAL_GetTick();
+
+ /* Check selected event flag */
+ while(__HAL_ADC_GET_FLAG(hadc, EventType) == RESET)
+ {
+ /* Check if timeout is disabled (set to infinite wait) */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0) || ((HAL_GetTick()-tickstart) > Timeout))
+ {
+ /* Update ADC state machine to timeout */
+ hadc->State = HAL_ADC_STATE_TIMEOUT;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hadc);
+
+ return HAL_ERROR;
+ }
+ }
+ }
+
+ switch(EventType)
+ {
+ /* Analog watchdog (level out of window) event */
+ case AWD_EVENT:
+ /* Change ADC state */
+ hadc->State = HAL_ADC_STATE_AWD;
+
+ /* Clear ADC analog watchdog flag */
+ __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD);
+ break;
+
+ /* Overrun event */
+ default: /* Case OVR_EVENT */
+ /* If overrun is set to overwrite previous data, overrun event is not */
+ /* considered as an error. */
+ /* (cf ref manual "Managing conversions without using the DMA and without */
+ /* overrun ") */
+ if (hadc->Init.Overrun == OVR_DATA_PRESERVED)
+ {
+ /* Change ADC state */
+ hadc->State = HAL_ADC_STATE_ERROR;
+
+ /* Set ADC error code to overrun */
+ hadc->ErrorCode |= HAL_ADC_ERROR_OVR;
+ }
+
+ /* Clear ADC Overrun flag */
+ __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_OVR);
+ break;
+ }
+
+ /* Return ADC state */
+ return HAL_OK;
+}
+
+/**
+ * @brief Enables ADC, starts conversion of regular group with interruption.
+ * Interruptions enabled in this function:
+ * - EOC (end of conversion of regular group) or EOS (end of
+ * sequence of regular group) depending on ADC initialization
+ * parameter "EOCSelection"
+ * - overrun (if available)
+ * Each of these interruptions has its dedicated callback function.
+ * @param hadc: ADC handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef* hadc)
+{
+ HAL_StatusTypeDef tmpHALStatus = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
+
+ /* Perform ADC enable and conversion start if no conversion is on going */
+ if (__HAL_ADC_IS_CONVERSION_ONGOING_REGULAR(hadc) == RESET)
+ {
+ /* Process locked */
+ __HAL_LOCK(hadc);
+
+ /* Enable the ADC peripheral */
+ /* If low power mode AutoPowerOff is enabled, power-on/off phases are */
+ /* performed automatically by hardware. */
+ if (hadc->Init.LowPowerAutoPowerOff != ENABLE)
+ {
+ tmpHALStatus = ADC_Enable(hadc);
+ }
+
+ /* Start conversion if ADC is effectively enabled */
+ if (tmpHALStatus != HAL_ERROR)
+ {
+ /* State machine update: Change ADC state */
+ hadc->State = HAL_ADC_STATE_BUSY_REG;
+
+ /* Set ADC error code to none */
+ __HAL_ADC_CLEAR_ERRORCODE(hadc);
+
+ /* Clear regular group conversion flag and overrun flag */
+ /* (To ensure of no unknown state from potential previous ADC */
+ /* operations) */
+ __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_EOC | ADC_FLAG_EOS | ADC_FLAG_OVR));
+
+ /* Enable ADC end of conversion interrupt */
+ /* Enable ADC overrun interrupt */
+ switch(hadc->Init.EOCSelection)
+ {
+ case EOC_SEQ_CONV:
+ __HAL_ADC_DISABLE_IT(hadc, ADC_IT_EOC);
+ __HAL_ADC_ENABLE_IT(hadc, (ADC_IT_EOS | ADC_IT_OVR));
+ break;
+ /* case EOC_SINGLE_CONV */
+ default:
+ __HAL_ADC_ENABLE_IT(hadc, (ADC_IT_EOC | ADC_IT_EOS | ADC_IT_OVR));
+ break;
+ }
+
+ /* Enable conversion of regular group. */
+ /* If software start has been selected, conversion starts immediately. */
+ /* If external trigger has been selected, conversion will start at next */
+ /* trigger event. */
+ hadc->Instance->CR |= ADC_CR_ADSTART;
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hadc);
+ }
+ else
+ {
+ tmpHALStatus = HAL_BUSY;
+ }
+
+ /* Return function status */
+ return tmpHALStatus;
+}
+
+
+/**
+ * @brief Stop ADC conversion of regular group, disable interruption of
+ * end-of-conversion, disable ADC peripheral.
+ * @param hadc: ADC handle
+ * @retval HAL status.
+ */
+HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef* hadc)
+{
+ HAL_StatusTypeDef tmpHALStatus = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
+
+ /* Process locked */
+ __HAL_LOCK(hadc);
+
+ /* 1. Stop potential conversion on going, on regular group */
+ tmpHALStatus = ADC_ConversionStop(hadc);
+
+ /* Disable ADC peripheral if conversions are effectively stopped */
+ if (tmpHALStatus != HAL_ERROR)
+ {
+ /* Disable ADC end of conversion interrupt for regular group */
+ /* Disable ADC overrun interrupt */
+ __HAL_ADC_DISABLE_IT(hadc, (ADC_IT_EOC | ADC_IT_EOS | ADC_IT_OVR));
+
+ /* 2. Disable the ADC peripheral */
+ tmpHALStatus = ADC_Disable(hadc);
+
+ /* Check if ADC is effectively disabled */
+ if (tmpHALStatus != HAL_ERROR)
+ {
+ /* Change ADC state */
+ hadc->State = HAL_ADC_STATE_READY;
+ }
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hadc);
+
+ /* Return function status */
+ return tmpHALStatus;
+}
+
+/**
+ * @brief Enables ADC, starts conversion of regular group and transfers result
+ * through DMA.
+ * Interruptions enabled in this function:
+ * - DMA transfer complete
+ * - DMA half transfer
+ * - overrun
+ * Each of these interruptions has its dedicated callback function.
+ * @param hadc: ADC handle
+ * @param pData: The destination Buffer address.
+ * @param Length: The length of data to be transferred from ADC peripheral to memory.
+ * @retval None
+ */
+HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length)
+{
+ HAL_StatusTypeDef tmpHALStatus = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
+
+ /* Perform ADC enable and conversion start if no conversion is on going */
+ if (__HAL_ADC_IS_CONVERSION_ONGOING_REGULAR(hadc) == RESET)
+ {
+ /* Process locked */
+ __HAL_LOCK(hadc);
+
+ /* Enable the ADC peripheral */
+ /* If low power mode AutoPowerOff is enabled, power-on/off phases are */
+ /* performed automatically by hardware. */
+ if (hadc->Init.LowPowerAutoPowerOff != ENABLE)
+ {
+ tmpHALStatus = ADC_Enable(hadc);
+ }
+
+ /* Start conversion if ADC is effectively enabled */
+ if (tmpHALStatus != HAL_ERROR)
+ {
+ /* State machine update: Change ADC state */
+ hadc->State = HAL_ADC_STATE_BUSY_REG;
+
+ /* Set ADC error code to none */
+ __HAL_ADC_CLEAR_ERRORCODE(hadc);
+
+
+ /* Set the DMA transfer complete callback */
+ hadc->DMA_Handle->XferCpltCallback = ADC_DMAConvCplt;
+
+ /* Set the DMA half transfer complete callback */
+ hadc->DMA_Handle->XferHalfCpltCallback = ADC_DMAHalfConvCplt;
+
+ /* Set the DMA error callback */
+ hadc->DMA_Handle->XferErrorCallback = ADC_DMAError;
+
+
+ /* Manage ADC and DMA start: ADC overrun interruption, DMA start, ADC */
+ /* start (in case of SW start): */
+
+ /* Clear regular group conversion flag and overrun flag */
+ /* (To ensure of no unknown state from potential previous ADC */
+ /* operations) */
+ __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_EOC | ADC_FLAG_EOS | ADC_FLAG_OVR));
+
+ /* Enable ADC overrun interrupt */
+ __HAL_ADC_ENABLE_IT(hadc, ADC_IT_OVR);
+
+ /* Enable ADC DMA mode */
+ hadc->Instance->CFGR1 |= ADC_CFGR1_DMAEN;
+
+ /* Start the DMA channel */
+ HAL_DMA_Start_IT(hadc->DMA_Handle, (uint32_t)&hadc->Instance->DR, (uint32_t)pData, Length);
+
+ /* Enable conversion of regular group. */
+ /* If software start has been selected, conversion starts immediately. */
+ /* If external trigger has been selected, conversion will start at next */
+ /* trigger event. */
+ hadc->Instance->CR |= ADC_CR_ADSTART;
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hadc);
+ }
+ else
+ {
+ tmpHALStatus = HAL_BUSY;
+ }
+
+ /* Return function status */
+ return tmpHALStatus;
+}
+
+/**
+ * @brief Stop ADC conversion of regular group, disable ADC DMA transfer, disable
+ * ADC peripheral.
+ * Each of these interruptions has its dedicated callback function.
+ * @param hadc: ADC handle
+ * @retval HAL status.
+ */
+HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef* hadc)
+{
+ HAL_StatusTypeDef tmpHALStatus = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
+
+ /* Process locked */
+ __HAL_LOCK(hadc);
+
+ /* 1. Stop potential conversion on going, on regular group */
+ tmpHALStatus = ADC_ConversionStop(hadc);
+
+ /* Disable ADC peripheral if conversions are effectively stopped */
+ if (tmpHALStatus != HAL_ERROR)
+ {
+ /* Disable ADC DMA (ADC DMA configuration ADC_CFGR_DMACFG is kept) */
+ hadc->Instance->CFGR1 &= ~ADC_CFGR1_DMAEN;
+
+ /* Disable the DMA channel (in case of DMA in circular mode or stop while */
+ /* while DMA transfer is on going) */
+ tmpHALStatus = HAL_DMA_Abort(hadc->DMA_Handle);
+
+ /* Check if DMA channel effectively disabled */
+ if (tmpHALStatus != HAL_OK)
+ {
+ /* Update ADC state machine to error */
+ hadc->State = HAL_ADC_STATE_ERROR;
+ }
+
+ /* Disable ADC overrun interrupt */
+ __HAL_ADC_DISABLE_IT(hadc, ADC_IT_OVR);
+
+ /* 2. Disable the ADC peripheral */
+ /* Update "tmpHALStatus" only if DMA channel disabling passed, to keep in */
+ /* memory a potential failing status. */
+ if (tmpHALStatus == HAL_OK)
+ {
+ tmpHALStatus = ADC_Disable(hadc);
+ }
+ else
+ {
+ ADC_Disable(hadc);
+ }
+
+ /* Check if ADC is effectively disabled */
+ if (tmpHALStatus == HAL_OK)
+ {
+ /* Change ADC state */
+ hadc->State = HAL_ADC_STATE_READY;
+ }
+
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hadc);
+
+ /* Return function status */
+ return tmpHALStatus;
+}
+
+/**
+ * @brief Get ADC regular group conversion result.
+ * @note Reading DR register automatically clears EOC (end of conversion of
+ * regular group) flag.
+ * Additionally, this functions clears EOS (end of sequence of
+ * regular group) flag, in case of the end of the sequence is reached.
+ * @param hadc: ADC handle
+ * @retval Converted value
+ */
+uint32_t HAL_ADC_GetValue(ADC_HandleTypeDef* hadc)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
+
+ /* @Note: EOC flag is not cleared here by software because automatically */
+ /* cleared by hardware when reading register DR. */
+
+ /* Clear regular group end of sequence flag */
+ __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_EOS);
+
+ /* Return ADC converted value */
+ return hadc->Instance->DR;
+}
+
+/**
+ * @brief DMA transfer complete callback.
+ * @param hdma: pointer to DMA handle.
+ * @retval None
+ */
+static void ADC_DMAConvCplt(DMA_HandleTypeDef *hdma)
+{
+ /* Retrieve ADC handle corresponding to current DMA handle */
+ ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ /* Update state machine on conversion status if not in error state */
+ if(hadc->State != HAL_ADC_STATE_ERROR)
+ {
+ /* Change ADC state */
+ hadc->State = HAL_ADC_STATE_EOC_REG;
+ }
+
+ /* Conversion complete callback */
+ HAL_ADC_ConvCpltCallback(hadc);
+}
+
+/**
+ * @brief DMA half transfer complete callback.
+ * @param hdma: pointer to DMA handle.
+ * @retval None
+ */
+static void ADC_DMAHalfConvCplt(DMA_HandleTypeDef *hdma)
+{
+ /* Retrieve ADC handle corresponding to current DMA handle */
+ ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ /* Half conversion callback */
+ HAL_ADC_ConvHalfCpltCallback(hadc);
+}
+
+/**
+ * @brief DMA error callback
+ * @param hdma: pointer to DMA handle.
+ * @retval None
+ */
+static void ADC_DMAError(DMA_HandleTypeDef *hdma)
+{
+ /* Retrieve ADC handle corresponding to current DMA handle */
+ ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ /* Change ADC state */
+ hadc->State = HAL_ADC_STATE_ERROR;
+
+ /* Set ADC error code to DMA error */
+ hadc->ErrorCode |= HAL_ADC_ERROR_DMA;
+
+ /* Error callback */
+ HAL_ADC_ErrorCallback(hadc);
+}
+
+/**
+ * @brief Handles ADC interrupt request.
+ * @param hadc: ADC handle
+ * @retval None
+ */
+void HAL_ADC_IRQHandler(ADC_HandleTypeDef* hadc)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
+ assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode));
+ assert_param(IS_ADC_EOC_SELECTION(hadc->Init.EOCSelection));
+
+ /* ========== Check End of Conversion flag for regular group ========== */
+ if( (__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_EOC) && __HAL_ADC_GET_IT_SOURCE(hadc, ADC_IT_EOC)) ||
+ (__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_EOS) && __HAL_ADC_GET_IT_SOURCE(hadc, ADC_IT_EOS)) )
+ {
+ /* Update state machine on conversion status if not in error state */
+ if(hadc->State != HAL_ADC_STATE_ERROR)
+ {
+ /* Change ADC state */
+ hadc->State = HAL_ADC_STATE_EOC_REG;
+ }
+
+ /* Disable interruption if no further conversion upcoming by regular */
+ /* external trigger or by continuous mode, */
+ /* and if scan sequence if completed. */
+ if(__HAL_ADC_IS_SOFTWARE_START_REGULAR(hadc) &&
+ (hadc->Init.ContinuousConvMode == DISABLE) )
+ {
+ /* If End of Sequence is reached, disable interrupts */
+ if( __HAL_ADC_GET_FLAG(hadc, ADC_FLAG_EOS) )
+ {
+ /* Allowed to modify bits ADC_IT_EOC/ADC_IT_EOS only if bit */
+ /* ADSTART==0 (no conversion on going) */
+ if (__HAL_ADC_IS_CONVERSION_ONGOING_REGULAR(hadc) == RESET)
+ {
+ /* Disable ADC end of sequence conversion interrupt */
+ /* @Note: Overrun interrupt was enabled with EOC interrupt in */
+ /* HAL_Start_IT(), but is not disabled here because can be used */
+ /* by overrun IRQ process below. */
+ __HAL_ADC_DISABLE_IT(hadc, ADC_IT_EOC | ADC_IT_EOS);
+ }
+ else
+ {
+ /* Change ADC state to error state */
+ hadc->State = HAL_ADC_STATE_ERROR;
+
+ /* Set ADC error code to ADC IP internal error */
+ hadc->ErrorCode |= HAL_ADC_ERROR_INTERNAL;
+ }
+ }
+ }
+
+ /* Conversion complete callback */
+ /* @Note: into callback, to determine if conversion has been triggered */
+ /* from EOC or EOS, possibility to use: */
+ /* " if( __HAL_ADC_GET_FLAG(&hadc, ADC_FLAG_EOS)) " */
+ HAL_ADC_ConvCpltCallback(hadc);
+
+
+ /* Clear regular group conversion flag */
+ /* @Note: in case of overrun set to OVR_DATA_PRESERVED, end of conversion */
+ /* flags clear induces the release of the preserved data. */
+ /* Therefore, if the preserved data value is needed, it must be */
+ /* read preliminarily into HAL_ADC_ConvCpltCallback(). */
+ __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_EOC | ADC_FLAG_EOS) );
+ }
+
+ /* ========== Check Analog watchdog flags ========== */
+ if(__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_AWD) && __HAL_ADC_GET_IT_SOURCE(hadc, ADC_IT_AWD))
+ {
+ /* Change ADC state */
+ hadc->State = HAL_ADC_STATE_AWD;
+
+ /* Level out of window callback */
+ HAL_ADC_LevelOutOfWindowCallback(hadc);
+
+ /* Clear ADC Analog watchdog flag */
+ __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD);
+
+ }
+
+
+ /* ========== Check Overrun flag ========== */
+ if(__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_OVR) && __HAL_ADC_GET_IT_SOURCE(hadc, ADC_IT_OVR))
+ {
+ /* If overrun is set to overwrite previous data (default setting), */
+ /* overrun event is not considered as an error. */
+ /* (cf ref manual "Managing conversions without using the DMA and without */
+ /* overrun ") */
+ /* Exception for usage with DMA overrun event always considered as an */
+ /* error. */
+ if ((hadc->Init.Overrun == OVR_DATA_PRESERVED) ||
+ HAL_IS_BIT_SET(hadc->Instance->CFGR1, ADC_CFGR1_DMAEN) )
+ {
+ /* Change ADC state to error state */
+ hadc->State = HAL_ADC_STATE_ERROR;
+
+ /* Set ADC error code to overrun */
+ hadc->ErrorCode |= HAL_ADC_ERROR_OVR;
+
+ /* Error callback */
+ HAL_ADC_ErrorCallback(hadc);
+ }
+
+ /* Clear the Overrun flag */
+ __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_OVR);
+ }
+
+}
+
+
+/**
+ * @brief Conversion complete callback in non blocking mode
+ * @param hadc: ADC handle
+ * @retval None
+ */
+__weak void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef* hadc)
+{
+ /* NOTE : This function should not be modified. When the callback is needed,
+ function HAL_ADC_ConvCpltCallback must be implemented in the user file.
+ */
+}
+
+/**
+ * @brief Conversion DMA half-transfer callback in non blocking mode
+ * @param hadc: ADC handle
+ * @retval None
+ */
+__weak void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef* hadc)
+{
+ /* NOTE : This function should not be modified. When the callback is needed,
+ function HAL_ADC_ConvHalfCpltCallback must be implemented in the user file.
+ */
+}
+
+/**
+ * @brief Analog watchdog callback in non blocking mode.
+ * @param hadc: ADC handle
+ * @retval None
+ */
+__weak void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef* hadc)
+{
+ /* NOTE : This function should not be modified. When the callback is needed,
+ function HAL_ADC_LevelOoutOfWindowCallback must be implemented in the user file.
+ */
+}
+
+/**
+ * @brief ADC error callback in non blocking mode
+ * (ADC conversion with interruption or transfer by DMA)
+ * @param hadc: ADC handle
+ * @retval None
+ */
+__weak void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc)
+{
+ /* NOTE : This function should not be modified. When the callback is needed,
+ function HAL_ADC_ErrorCallback must be implemented in the user file.
+ */
+}
+
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Exported_Functions_Group3 Peripheral Control functions
+ * @brief Peripheral Control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Configure channels on regular group
+ (+) Configure the analog watchdog
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Configures the the selected channel to be linked to the regular
+ * group.
+ * @note In case of usage of internal measurement channels:
+ * VrefInt/Vbat/TempSensor.
+ * Sampling time constraints must be respected (sampling time can be
+ * adjusted in function of ADC clock frequency and sampling time
+ * setting).
+ * Refer to device datasheet for timings values, parameters TS_vrefint,
+ * TS_vbat, TS_temp (values rough order: 5us to 17us).
+ * These internal paths can be be disabled using function
+ * HAL_ADC_DeInit().
+ * @note Possibility to update parameters on the fly:
+ * This function initializes channel into regular group, following
+ * calls to this function can be used to reconfigure some parameters
+ * of structure "ADC_ChannelConfTypeDef" on the fly, without reseting
+ * the ADC.
+ * The setting of these parameters is conditioned to ADC state.
+ * For parameters constraints, see comments of structure
+ * "ADC_ChannelConfTypeDef".
+ * @param hadc: ADC handle
+ * @param sConfig: Structure of ADC channel for regular group.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef* hadc, ADC_ChannelConfTypeDef* sConfig)
+{
+ HAL_StatusTypeDef tmpHALStatus = HAL_OK;
+ __IO uint32_t wait_loop_index = 0;
+
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
+ assert_param(IS_ADC_CHANNEL(sConfig->Channel));
+ assert_param(IS_ADC_RANK(sConfig->Rank));
+ assert_param(IS_ADC_SAMPLE_TIME(sConfig->SamplingTime));
+
+ /* Process locked */
+ __HAL_LOCK(hadc);
+
+ /* Parameters update conditioned to ADC state: */
+ /* Parameters that can be updated when ADC is disabled or enabled without */
+ /* conversion on going on regular group: */
+ /* - Channel number */
+ /* - Channel sampling time */
+ /* - Management of internal measurement channels: Vbat/VrefInt/TempSensor */
+ if (__HAL_ADC_IS_CONVERSION_ONGOING_REGULAR(hadc) == RESET)
+ {
+ /* Configure channel: depending on rank setting, add it or remove it from */
+ /* ADC conversion sequencer. */
+ if (sConfig->Rank != ADC_RANK_NONE)
+ {
+ /* Regular sequence configuration */
+ /* Set the channel selection register from the selected channel */
+ hadc->Instance->CHSELR |= __HAL_ADC_CHSELR_CHANNEL(sConfig->Channel);
+
+ /* Channel sampling time configuration */
+ /* Modify sampling time if needed (not needed in case of reoccurrence */
+ /* for several channels programmed consecutively into the sequencer) */
+ if (sConfig->SamplingTime != __HAL_ADC_GET_SAMPLINGTIME(hadc))
+ {
+ /* Channel sampling time configuration */
+ /* Clear the old sample time */
+ hadc->Instance->SMPR &= ~(ADC_SMPR_SMP);
+
+ /* Set the new sample time */
+ hadc->Instance->SMPR |= (sConfig->SamplingTime);
+ }
+
+ /* Management of internal measurement channels: Vbat/VrefInt/TempSensor */
+ /* internal measurement paths enable: If internal channel selected, */
+ /* enable dedicated internal buffers and path. */
+ /* @Note: these internal measurement paths can be disabled using */
+ /* HAL_ADC_DeInit() or removing the channel from sequencer with */
+ /* channel configuration parameter "Rank". */
+
+ /* If Channel_16 is selected, enable Temp. sensor measurement path. */
+ if (sConfig->Channel == ADC_CHANNEL_TEMPSENSOR)
+ {
+ ADC->CCR |= ADC_CCR_TSEN;
+
+ /* Delay for temperature sensor stabilization time */
+ while(wait_loop_index < ADC_TEMPSENSOR_DELAY_CPU_CYCLES)
+ {
+ wait_loop_index++;
+ }
+ }
+ /* If Channel_17 is selected, enable VBAT measurement path. */
+ else if (sConfig->Channel == ADC_CHANNEL_VBAT)
+ {
+ ADC->CCR |= ADC_CCR_VBATEN;
+ }
+ /* If Channel_18 is selected, enable VREFINT measurement path. */
+ else if (sConfig->Channel == ADC_CHANNEL_VREFINT)
+ {
+ ADC->CCR |= ADC_CCR_VREFEN;
+ }
+
+ }
+ else
+ {
+ /* Regular sequence configuration */
+ /* Reset the channel selection register from the selected channel */
+ hadc->Instance->CHSELR &= ~__HAL_ADC_CHSELR_CHANNEL(sConfig->Channel);
+
+ /* Management of internal measurement channels: Vbat/VrefInt/TempSensor */
+ /* internal measurement paths disable: If internal channel selected, */
+ /* disable dedicated internal buffers and path. */
+
+ /* If Channel_16 is selected, disable Temp. sensor measurement path. */
+ if (sConfig->Channel == ADC_CHANNEL_TEMPSENSOR)
+ {
+ ADC->CCR &= ~ADC_CCR_TSEN;
+ }
+ /* If Channel_17 is selected, disable VBAT measurement path. */
+ else if (sConfig->Channel == ADC_CHANNEL_VBAT)
+ {
+ ADC->CCR &= ~ADC_CCR_VBATEN;
+ }
+ /* If Channel_18 is selected, disable VREFINT measurement path. */
+ else if (sConfig->Channel == ADC_CHANNEL_VREFINT)
+ {
+ ADC->CCR &= ~ADC_CCR_VREFEN;
+ }
+ }
+
+ }
+
+
+ /* If a conversion is on going on regular group, no update on regular */
+ /* channel could be done on neither of the channel configuration structure */
+ /* parameters. */
+ else
+ {
+ /* Update ADC state machine to error */
+ hadc->State = HAL_ADC_STATE_ERROR;
+
+ tmpHALStatus = HAL_ERROR;
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hadc);
+
+ /* Return function status */
+ return tmpHALStatus;
+}
+
+
+/**
+ * @brief Configures the analog watchdog.
+ * @note Possibility to update parameters on the fly:
+ * This function initializes the selected analog watchdog, following
+ * calls to this function can be used to reconfigure some parameters
+ * of structure "ADC_AnalogWDGConfTypeDef" on the fly, without reseting
+ * the ADC.
+ * The setting of these parameters is conditioned to ADC state.
+ * For parameters constraints, see comments of structure
+ * "ADC_AnalogWDGConfTypeDef".
+ * @param hadc: ADC handle
+ * @param AnalogWDGConfig: Structure of ADC analog watchdog configuration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef* hadc, ADC_AnalogWDGConfTypeDef* AnalogWDGConfig)
+{
+ HAL_StatusTypeDef tmpHALStatus = HAL_OK;
+
+ uint32_t tmpAWDHighThresholdShifted;
+ uint32_t tmpAWDLowThresholdShifted;
+
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
+ assert_param(IS_FUNCTIONAL_STATE(AnalogWDGConfig->ITMode));
+
+ /* Verify if threshold is within the selected ADC resolution */
+ assert_param(IS_ADC_RANGE(__HAL_ADC_GET_RESOLUTION(hadc), AnalogWDGConfig->HighThreshold));
+ assert_param(IS_ADC_RANGE(__HAL_ADC_GET_RESOLUTION(hadc), AnalogWDGConfig->LowThreshold));
+
+ if(AnalogWDGConfig->WatchdogMode == ADC_ANALOGWATCHDOG_SINGLE_REG)
+ {
+ assert_param(IS_ADC_CHANNEL(AnalogWDGConfig->Channel));
+ }
+
+ /* Process locked */
+ __HAL_LOCK(hadc);
+
+ /* Parameters update conditioned to ADC state: */
+ /* Parameters that can be updated when ADC is disabled or enabled without */
+ /* conversion on going on regular group: */
+ /* - Analog watchdog channels */
+ /* - Analog watchdog thresholds */
+ if (__HAL_ADC_IS_CONVERSION_ONGOING_REGULAR(hadc) == RESET)
+ {
+ /* Configuration of analog watchdog: */
+ /* - Set the analog watchdog enable mode: one or overall group of */
+ /* channels. */
+ /* - Set the Analog watchdog channel (is not used if watchdog */
+ /* mode "all channels": ADC_CFGR_AWD1SGL=0). */
+ hadc->Instance->CFGR1 &= ~( ADC_CFGR1_AWDSGL |
+ ADC_CFGR1_AWDEN |
+ ADC_CFGR1_AWDCH );
+
+ hadc->Instance->CFGR1 |= ( AnalogWDGConfig->WatchdogMode |
+ __HAL_ADC_CFGR_AWDCH(AnalogWDGConfig->Channel) );
+
+ /* Shift the offset in function of the selected ADC resolution: Thresholds*/
+ /* have to be left-aligned on bit 11, the LSB (right bits) are set to 0 */
+ tmpAWDHighThresholdShifted = __HAL_ADC_AWD1THRESHOLD_SHIFT_RESOLUTION(hadc, AnalogWDGConfig->HighThreshold);
+ tmpAWDLowThresholdShifted = __HAL_ADC_AWD1THRESHOLD_SHIFT_RESOLUTION(hadc, AnalogWDGConfig->LowThreshold);
+
+ /* Set the high and low thresholds */
+ hadc->Instance->TR &= ~(ADC_TR_HT | ADC_TR_LT);
+ hadc->Instance->TR |= ( __HAL_ADC_TRX_HIGHTHRESHOLD (tmpAWDHighThresholdShifted) |
+ tmpAWDLowThresholdShifted );
+
+ /* Clear the ADC Analog watchdog flag (in case of left enabled by */
+ /* previous ADC operations) to be ready to use for HAL_ADC_IRQHandler() */
+ /* or HAL_ADC_PollForEvent(). */
+ __HAL_ADC_CLEAR_FLAG(hadc, ADC_IT_AWD);
+
+ /* Configure ADC Analog watchdog interrupt */
+ if(AnalogWDGConfig->ITMode == ENABLE)
+ {
+ /* Enable the ADC Analog watchdog interrupt */
+ __HAL_ADC_ENABLE_IT(hadc, ADC_IT_AWD);
+ }
+ else
+ {
+ /* Disable the ADC Analog watchdog interrupt */
+ __HAL_ADC_DISABLE_IT(hadc, ADC_IT_AWD);
+ }
+
+ }
+ /* If a conversion is on going on regular group, no update could be done */
+ /* on neither of the AWD configuration structure parameters. */
+ else
+ {
+ /* Update ADC state machine to error */
+ hadc->State = HAL_ADC_STATE_ERROR;
+
+ tmpHALStatus = HAL_ERROR;
+ }
+
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hadc);
+
+ /* Return function status */
+ return tmpHALStatus;
+}
+
+
+/**
+ * @}
+ */
+
+
+/** @defgroup ADC_Exported_Functions_Group4 Peripheral State functions
+ * @brief Peripheral State functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral State and Errors functions #####
+ ===============================================================================
+ [..]
+ This subsection provides functions to get in run-time the status of the
+ peripheral.
+ (+) Check the ADC state
+ (+) Check the ADC error code
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief return the ADC state
+ * @param hadc: ADC handle
+ * @retval HAL state
+ */
+HAL_ADC_StateTypeDef HAL_ADC_GetState(ADC_HandleTypeDef* hadc)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
+
+ /* Return ADC state */
+ return hadc->State;
+}
+
+/**
+ * @brief Return the ADC error code
+ * @param hadc: ADC handle
+ * @retval ADC Error Code
+ */
+uint32_t HAL_ADC_GetError(ADC_HandleTypeDef *hadc)
+{
+ return hadc->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Private_Functions ADC Private Functions
+ * @{
+ */
+
+/**
+ * @brief Enable the selected ADC.
+ * @note Prerequisite condition to use this function: ADC must be disabled
+ * and voltage regulator must be enabled (done into HAL_ADC_Init()).
+ * @param hadc: ADC handle
+ * @retval HAL status.
+ */
+static HAL_StatusTypeDef ADC_Enable(ADC_HandleTypeDef* hadc)
+{
+ uint32_t tickstart = 0;
+ __IO uint32_t wait_loop_index = 0;
+
+ /* ADC enable and wait for ADC ready (in case of ADC is disabled or */
+ /* enabling phase not yet completed: flag ADC ready not yet set). */
+ /* Timeout implemented to not be stuck if ADC cannot be enabled (possible */
+ /* causes: ADC clock not running, ...). */
+ if (__HAL_ADC_IS_ENABLED(hadc) == RESET)
+ {
+ /* Check if conditions to enable the ADC are fulfilled */
+ if (__HAL_ADC_ENABLING_CONDITIONS(hadc) == RESET)
+ {
+ /* Update ADC state machine to error */
+ hadc->State = HAL_ADC_STATE_ERROR;
+
+ /* Set ADC error code to ADC IP internal error */
+ hadc->ErrorCode |= HAL_ADC_ERROR_INTERNAL;
+
+ return HAL_ERROR;
+ }
+
+ /* Enable the ADC peripheral */
+ __HAL_ADC_ENABLE(hadc);
+
+ /* Delay for ADC stabilization time. */
+ /* Delay fixed to worst case: maximum CPU frequency */
+ while(wait_loop_index < ADC_STAB_DELAY_CPU_CYCLES)
+ {
+ wait_loop_index++;
+ }
+
+ /* Get timeout */
+ tickstart = HAL_GetTick();
+
+ /* Wait for ADC effectively enabled */
+ while(__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_RDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart) > ADC_ENABLE_TIMEOUT)
+ {
+ /* Update ADC state machine to error */
+ hadc->State = HAL_ADC_STATE_ERROR;
+
+ /* Set ADC error code to ADC IP internal error */
+ hadc->ErrorCode |= HAL_ADC_ERROR_INTERNAL;
+
+ return HAL_ERROR;
+ }
+ }
+
+ }
+
+ /* Return HAL status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Disable the selected ADC.
+ * @note Prerequisite condition to use this function: ADC conversions must be
+ * stopped.
+ * @param hadc: ADC handle
+ * @retval HAL status.
+ */
+static HAL_StatusTypeDef ADC_Disable(ADC_HandleTypeDef* hadc)
+{
+ uint32_t tickstart = 0;
+
+ /* Verification if ADC is not already disabled: */
+ /* @Note: forbidden to disable ADC (set bit ADC_CR_ADDIS) if ADC is already */
+ /* disabled. */
+ if (__HAL_ADC_IS_ENABLED(hadc) != RESET )
+ {
+ /* Check if conditions to disable the ADC are fulfilled */
+ if (__HAL_ADC_DISABLING_CONDITIONS(hadc) != RESET)
+ {
+ /* Disable the ADC peripheral */
+ __HAL_ADC_DISABLE(hadc);
+ }
+ else
+ {
+ /* Update ADC state machine to error */
+ hadc->State = HAL_ADC_STATE_ERROR;
+
+ /* Set ADC error code to ADC IP internal error */
+ hadc->ErrorCode |= HAL_ADC_ERROR_INTERNAL;
+
+ return HAL_ERROR;
+ }
+
+ /* Wait for ADC effectively disabled */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_SET(hadc->Instance->CR, ADC_CR_ADEN))
+ {
+ if((HAL_GetTick() - tickstart) > ADC_ENABLE_TIMEOUT)
+ {
+ /* Update ADC state machine to error */
+ hadc->State = HAL_ADC_STATE_ERROR;
+
+ /* Set ADC error code to ADC IP internal error */
+ hadc->ErrorCode |= HAL_ADC_ERROR_INTERNAL;
+
+ return HAL_ERROR;
+ }
+ }
+ }
+
+ /* Return HAL status */
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Stop ADC conversion.
+ * @note Prerequisite condition to use this function: ADC conversions must be
+ * stopped to disable the ADC.
+ * @param hadc: ADC handle
+ * @retval HAL status.
+ */
+static HAL_StatusTypeDef ADC_ConversionStop(ADC_HandleTypeDef* hadc)
+{
+ uint32_t tickstart = 0;
+
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
+
+ /* Verification if ADC is not already stopped on regular group to bypass */
+ /* this function if not needed. */
+ if (__HAL_ADC_IS_CONVERSION_ONGOING_REGULAR(hadc))
+ {
+
+ /* Stop potential conversion on going on regular group */
+ /* Software is allowed to set ADSTP only when ADSTART=1 and ADDIS=0 */
+ if (HAL_IS_BIT_SET(hadc->Instance->CR, ADC_CR_ADSTART) &&
+ HAL_IS_BIT_CLR(hadc->Instance->CR, ADC_CR_ADDIS) )
+ {
+ /* Stop conversions on regular group */
+ hadc->Instance->CR |= ADC_CR_ADSTP;
+ }
+
+ /* Wait for conversion effectively stopped */
+ tickstart = HAL_GetTick();
+
+ while((hadc->Instance->CR & ADC_CR_ADSTART) != RESET)
+ {
+ if((HAL_GetTick() - tickstart) > ADC_STOP_CONVERSION_TIMEOUT)
+ {
+ /* Update ADC state machine to error */
+ hadc->State = HAL_ADC_STATE_ERROR;
+
+ /* Set ADC error code to ADC IP internal error */
+ hadc->ErrorCode |= HAL_ADC_ERROR_INTERNAL;
+
+ return HAL_ERROR;
+ }
+ }
+
+ }
+
+ /* Return HAL status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+#endif /* HAL_ADC_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/src/stm32f0xx_hal_adc_ex.c b/f0/src/stm32f0xx_hal_adc_ex.c
new file mode 100755
index 0000000000000000000000000000000000000000..c86d4359c09bf7d90fa66c8c6852d898e31eefd3
--- /dev/null
+++ b/f0/src/stm32f0xx_hal_adc_ex.c
@@ -0,0 +1,265 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_adc_ex.c
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief This file provides firmware functions to manage the following
+ * functionalities of the Analog to Digital Convertor (ADC)
+ * peripheral:
+ * + Operation functions
+ * ++ Calibration (ADC automatic self-calibration)
+ *
+ @verbatim
+ ==============================================================================
+ ##### ADC specific features #####
+ ==============================================================================
+ [..]
+ (#) 12-bit, 10-bit, 8-bit or 6-bit configurable resolution
+
+ (#) Interrupt generation at the end of regular conversion and in case of
+ analog watchdog or overrun events.
+
+ (#) Single and continuous conversion modes.
+
+ (#) Scan mode for automatic conversion of channel 0 to channel 'n'.
+
+ (#) Data alignment with in-built data coherency.
+
+ (#) Programmable sampling time.
+
+ (#) ADC conversion group Regular.
+
+ (#) External trigger (timer or EXTI) with configurable polarity.
+
+ (#) DMA request generation for transfer of conversions data of regular group.
+
+ (#) ADC calibration
+
+ (#) ADC supply requirements: 2.4 V to 3.6 V at full speed and down to 1.8 V at
+ slower speed.
+
+ (#) ADC input range: from Vref minud (connected to Vssa) to Vref plus(connected to
+ Vdda or to an external voltage reference).
+
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+
+ (#) Enable the ADC interface
+ As prerequisite, into HAL_ADC_MspInit(), ADC clock must be configured
+ at RCC top level: clock source and clock prescaler.
+ Two possible clock sources: synchronous clock derived from APB clock
+ or asynchronous clock derived from ADC dedicated HSI RC oscillator
+ 14MHz.
+ Example:
+ __ADC1_CLK_ENABLE(); (mandatory)
+
+ HI14 enable or let under control of ADC: (optional)
+
+ RCC_OscInitTypeDef RCC_OscInitStructure;
+ RCC_OscInitStructure.OscillatorType = RCC_OSCILLATORTYPE_HSI14;
+ RCC_OscInitStructure.HSI14CalibrationValue = RCC_HSI14CALIBRATION_DEFAULT;
+ RCC_OscInitStructure.HSI14State = RCC_HSI14_ADC_CONTROL;
+ RCC_OscInitStructure.PLL... (optional if used for system clock)
+ HAL_RCC_OscConfig(&RCC_OscInitStructure);
+
+ Parameter "HSI14State" must be set either:
+ - to "...HSI14State = RCC_HSI14_ADC_CONTROL" to let the ADC control
+ the HSI14 oscillator enable/disable (if not used to supply the main
+ system clock): feature used if ADC mode LowPowerAutoPowerOff is
+ enabled.
+ - to "...HSI14State = RCC_HSI14_ON" to maintain the HSI14 oscillator
+ always enabled: can be used to supply the main system clock.
+
+ (#) ADC pins configuration
+ (++) Enable the clock for the ADC GPIOs using the following function:
+ __GPIOx_CLK_ENABLE();
+ (++) Configure these ADC pins in analog mode using HAL_GPIO_Init();
+
+ (#) Configure the ADC parameters (conversion resolution, data alignment,
+ continuous mode, ...) using the HAL_ADC_Init() function.
+
+ (#) Activate the ADC peripheral using one of the start functions:
+ HAL_ADC_Start(), HAL_ADC_Start_IT(), HAL_ADC_Start_DMA().
+
+ *** Regular channels group configuration ***
+ ============================================
+ [..]
+ (+) To configure the ADC regular channels group features, use
+ HAL_ADC_Init() and HAL_ADC_ConfigChannel() functions.
+ (+) To activate the continuous mode, use the HAL_ADC_Init() function.
+ (+) To read the ADC converted values, use the HAL_ADC_GetValue() function.
+
+ *** DMA for Regular channels group features configuration ***
+ =============================================================
+ [..]
+ (+) To enable the DMA mode for regular channels group, use the
+ HAL_ADC_Start_DMA() function.
+ (+) To enable the generation of DMA requests continuously at the end of
+ the last DMA transfer, use the HAL_ADC_Init() function.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup ADCEx ADCEx Extended HAL Module Driver
+ * @brief ADC HAL module driver
+ * @{
+ */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup ADCEx_Private_Constants ADCEx Private Constants
+ * @{
+ */
+
+/* Fixed timeout values for ADC calibration, enable settling time, disable */
+ /* settling time. */
+ /* Values defined to be higher than worst cases: low clock frequency, */
+ /* maximum prescaler. */
+ /* Ex of profile low frequency : Clock source at 0.1 MHz, ADC clock */
+ /* prescaler 4. */
+ /* Unit: ms */
+ #define ADC_DISABLE_TIMEOUT 2
+ #define ADC_CALIBRATION_TIMEOUT 2
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup ADCEx_Exported_Functions ADCEx Exported Functions
+ * @{
+ */
+
+/** @defgroup ADCEx_Exported_Functions_Group1 Extended Initialization/de-initialization functions
+ * @brief Extended Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Perform the ADC calibration.
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Perform an ADC automatic self-calibration
+ * Calibration prerequisite: ADC must be disabled (execute this
+ * function before HAL_ADC_Start() or after HAL_ADC_Stop() ).
+ * @note Calibration factor can be read after calibration, using function
+ * HAL_ADC_GetValue() (value on 7 bits: from DR[6;0]).
+ * @param hadc: ADC handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ADCEx_Calibration_Start(ADC_HandleTypeDef* hadc)
+{
+ HAL_StatusTypeDef tmpHALStatus = HAL_OK;
+ uint32_t tickstart=0;
+
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
+
+ /* Process locked */
+ __HAL_LOCK(hadc);
+
+ /* Calibration prerequisite: ADC must be disabled. */
+ if (__HAL_ADC_IS_ENABLED(hadc) == RESET )
+ {
+ /* Change ADC state */
+ hadc->State = HAL_ADC_STATE_READY;
+
+ /* Start ADC calibration */
+ hadc->Instance->CR |= ADC_CR_ADCAL;
+
+ tickstart = HAL_GetTick();
+
+ /* Wait for calibration completion */
+ while(HAL_IS_BIT_SET(hadc->Instance->CR, ADC_CR_ADCAL))
+ {
+ if((HAL_GetTick() - tickstart) > ADC_CALIBRATION_TIMEOUT)
+ {
+ /* Update ADC state machine to error */
+ hadc->State = HAL_ADC_STATE_ERROR;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hadc);
+
+ return HAL_ERROR;
+ }
+ }
+ }
+ else
+ {
+ /* Update ADC state machine to error */
+ hadc->State = HAL_ADC_STATE_ERROR;
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hadc);
+
+ /* Return function status */
+ return tmpHALStatus;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_ADC_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/src/stm32f0xx_hal_can.c b/f0/src/stm32f0xx_hal_can.c
new file mode 100755
index 0000000000000000000000000000000000000000..8e5298fa4526c427045c913c3ea3cc9e728e3809
--- /dev/null
+++ b/f0/src/stm32f0xx_hal_can.c
@@ -0,0 +1,1400 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_can.c
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief CAN HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Controller Area Network (CAN) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral Control functions
+ * + Peripheral State and Error functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#) Enable the CAN controller interface clock using __CAN_CLK_ENABLE();
+
+ (#) CAN pins configuration
+ (++) Enable the clock for the CAN GPIOs using the following function:
+ __GPIOx_CLK_ENABLE();
+ (++) Connect and configure the involved CAN pins to AF9 using the
+ following function HAL_GPIO_Init();
+
+ (#) Initialise and configure the CAN using HAL_CAN_Init() function.
+
+ (#) Transmit the desired CAN frame using HAL_CAN_Transmit() function.
+
+ (#) Receive a CAN frame using HAL_CAN_Receive() function.
+
+ *** Polling mode IO operation ***
+ =================================
+ [..]
+ (+) Start the CAN peripheral transmission and wait the end of this operation
+ using HAL_CAN_Transmit(), at this stage user can specify the value of timeout
+ according to his end application
+ (+) Start the CAN peripheral reception and wait the end of this operation
+ using HAL_CAN_Receive(), at this stage user can specify the value of timeout
+ according to his end application
+
+ *** Interrupt mode IO operation ***
+ ===================================
+ [..]
+ (+) Start the CAN peripheral transmission using HAL_CAN_Transmit_IT()
+ (+) Start the CAN peripheral reception using HAL_CAN_Receive_IT()
+ (+) Use HAL_CAN_IRQHandler() called under the used CAN Interrupt subroutine
+ (+) At CAN end of transmission HAL_CAN_TxCpltCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_CAN_TxCpltCallback
+ (+) In case of CAN Error, HAL_CAN_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_CAN_ErrorCallback
+
+ *** CAN HAL driver macros list ***
+ =============================================
+ [..]
+ Below the list of most used macros in CAN HAL driver.
+
+ (+) __HAL_CAN_ENABLE_IT: Enable the specified CAN interrupts
+ (+) __HAL_CAN_DISABLE_IT: Disable the specified CAN interrupts
+ (+) __HAL_CAN_GET_IT_SOURCE: Check if the specified CAN interrupt source is enabled or disabled
+ (+) __HAL_CAN_CLEAR_FLAG: Clear the CAN's pending flags
+ (+) __HAL_CAN_GET_FLAG: Get the selected CAN's flag status
+
+ [..]
+ (@) You can refer to the CAN HAL driver header file for more useful macros
+
+ @endverbatim
+
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+#ifdef HAL_CAN_MODULE_ENABLED
+
+#if defined(STM32F072xB) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F091xC) || defined(STM32F098xx)
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup CAN CAN HAL Module Driver
+ * @brief CAN driver modules
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup CAN_Private_Constants CAN Private Constants
+ * @{
+ */
+#define HAL_CAN_DEFAULT_TIMEOUT 10
+/**
+ * @}
+ */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup CAN_Private_Functions CAN Private Functions
+ * @{
+ */
+static HAL_StatusTypeDef CAN_Receive_IT(CAN_HandleTypeDef* hcan, uint8_t FIFONumber);
+static HAL_StatusTypeDef CAN_Transmit_IT(CAN_HandleTypeDef* hcan);
+/**
+ * @}
+ */
+
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup CAN_Exported_Functions CAN Exported Functions
+ * @{
+ */
+
+/** @defgroup CAN_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Initialization and de-initialization functions #####
+ ==============================================================================
+ [..] This section provides functions allowing to:
+ (+) Initialize and configure the CAN.
+ (+) De-initialize the CAN.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the CAN peripheral according to the specified
+ * parameters in the CAN_InitStruct.
+ * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
+ * the configuration information for the specified CAN.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CAN_Init(CAN_HandleTypeDef* hcan)
+{
+ uint32_t status = CAN_INITSTATUS_FAILED; /* Default init status */
+ uint32_t tickstart = 0;
+
+ /* Check CAN handle */
+ if(hcan == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_INSTANCE(hcan->Instance));
+ assert_param(IS_FUNCTIONAL_STATE(hcan->Init.TTCM));
+ assert_param(IS_FUNCTIONAL_STATE(hcan->Init.ABOM));
+ assert_param(IS_FUNCTIONAL_STATE(hcan->Init.AWUM));
+ assert_param(IS_FUNCTIONAL_STATE(hcan->Init.NART));
+ assert_param(IS_FUNCTIONAL_STATE(hcan->Init.RFLM));
+ assert_param(IS_FUNCTIONAL_STATE(hcan->Init.TXFP));
+ assert_param(IS_CAN_MODE(hcan->Init.Mode));
+ assert_param(IS_CAN_SJW(hcan->Init.SJW));
+ assert_param(IS_CAN_BS1(hcan->Init.BS1));
+ assert_param(IS_CAN_BS2(hcan->Init.BS2));
+ assert_param(IS_CAN_PRESCALER(hcan->Init.Prescaler));
+
+ if(hcan->State == HAL_CAN_STATE_RESET)
+ {
+ /* Init the low level hardware */
+ HAL_CAN_MspInit(hcan);
+ }
+
+ /* Initialize the CAN state*/
+ hcan->State = HAL_CAN_STATE_BUSY;
+
+ /* Exit from sleep mode */
+ hcan->Instance->MCR &= (~(uint32_t)CAN_MCR_SLEEP);
+
+ /* Request initialisation */
+ hcan->Instance->MCR |= CAN_MCR_INRQ ;
+
+ /* Get tickstart */
+ tickstart = HAL_GetTick();
+
+ /* Wait the acknowledge */
+ while((hcan->Instance->MSR & CAN_MSR_INAK) != CAN_MSR_INAK)
+ {
+ if((HAL_GetTick() - tickstart) > HAL_CAN_DEFAULT_TIMEOUT)
+ {
+ hcan->State= HAL_CAN_STATE_TIMEOUT;
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Check acknowledge */
+ if ((hcan->Instance->MSR & CAN_MSR_INAK) == CAN_MSR_INAK)
+ {
+ /* Set the time triggered communication mode */
+ if (hcan->Init.TTCM == ENABLE)
+ {
+ hcan->Instance->MCR |= CAN_MCR_TTCM;
+ }
+ else
+ {
+ hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_TTCM;
+ }
+
+ /* Set the automatic bus-off management */
+ if (hcan->Init.ABOM == ENABLE)
+ {
+ hcan->Instance->MCR |= CAN_MCR_ABOM;
+ }
+ else
+ {
+ hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_ABOM;
+ }
+
+ /* Set the automatic wake-up mode */
+ if (hcan->Init.AWUM == ENABLE)
+ {
+ hcan->Instance->MCR |= CAN_MCR_AWUM;
+ }
+ else
+ {
+ hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_AWUM;
+ }
+
+ /* Set the no automatic retransmission */
+ if (hcan->Init.NART == ENABLE)
+ {
+ hcan->Instance->MCR |= CAN_MCR_NART;
+ }
+ else
+ {
+ hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_NART;
+ }
+
+ /* Set the receive FIFO locked mode */
+ if (hcan->Init.RFLM == ENABLE)
+ {
+ hcan->Instance->MCR |= CAN_MCR_RFLM;
+ }
+ else
+ {
+ hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_RFLM;
+ }
+
+ /* Set the transmit FIFO priority */
+ if (hcan->Init.TXFP == ENABLE)
+ {
+ hcan->Instance->MCR |= CAN_MCR_TXFP;
+ }
+ else
+ {
+ hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_TXFP;
+ }
+
+ /* Set the bit timing register */
+ hcan->Instance->BTR = (uint32_t)((uint32_t)hcan->Init.Mode) | \
+ ((uint32_t)hcan->Init.SJW) | \
+ ((uint32_t)hcan->Init.BS1) | \
+ ((uint32_t)hcan->Init.BS2) | \
+ ((uint32_t)hcan->Init.Prescaler - 1);
+
+ /* Request leave initialisation */
+ hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_INRQ;
+
+ /* Get timeout */
+ tickstart = HAL_GetTick();
+
+ /* Wait the acknowledge */
+ while((hcan->Instance->MSR & CAN_MSR_INAK) == CAN_MSR_INAK)
+ {
+ if((HAL_GetTick() - tickstart) > HAL_CAN_DEFAULT_TIMEOUT)
+ {
+ hcan->State= HAL_CAN_STATE_TIMEOUT;
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Check acknowledged */
+ if ((hcan->Instance->MSR & CAN_MSR_INAK) != CAN_MSR_INAK)
+ {
+ status = CAN_INITSTATUS_SUCCESS;
+ }
+ }
+
+ if(status == CAN_INITSTATUS_SUCCESS)
+ {
+ /* Set CAN error code to none */
+ hcan->ErrorCode = HAL_CAN_ERROR_NONE;
+
+ /* Initialize the CAN state */
+ hcan->State = HAL_CAN_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else
+ {
+ /* Initialize the CAN state */
+ hcan->State = HAL_CAN_STATE_ERROR;
+
+ /* Return function status */
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Configures the CAN reception filter according to the specified
+ * parameters in the CAN_FilterInitStruct.
+ * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
+ * the configuration information for the specified CAN.
+ * @param sFilterConfig: pointer to a CAN_FilterConfTypeDef structure that
+ * contains the filter configuration information.
+ * @retval None
+ */
+HAL_StatusTypeDef HAL_CAN_ConfigFilter(CAN_HandleTypeDef* hcan, CAN_FilterConfTypeDef* sFilterConfig)
+{
+ uint32_t filternbrbitpos = 0;
+
+ /* Check the parameters */
+ assert_param(IS_CAN_FILTER_NUMBER(sFilterConfig->FilterNumber));
+ assert_param(IS_CAN_FILTER_MODE(sFilterConfig->FilterMode));
+ assert_param(IS_CAN_FILTER_SCALE(sFilterConfig->FilterScale));
+ assert_param(IS_CAN_FILTER_FIFO(sFilterConfig->FilterFIFOAssignment));
+ assert_param(IS_FUNCTIONAL_STATE(sFilterConfig->FilterActivation));
+ assert_param(IS_CAN_BANKNUMBER(sFilterConfig->BankNumber));
+
+ filternbrbitpos = ((uint32_t)1) << sFilterConfig->FilterNumber;
+
+ /* Initialisation mode for the filter */
+ hcan->Instance->FMR |= (uint32_t)CAN_FMR_FINIT;
+
+ /* Filter Deactivation */
+ hcan->Instance->FA1R &= ~(uint32_t)filternbrbitpos;
+
+ /* Filter Scale */
+ if (sFilterConfig->FilterScale == CAN_FILTERSCALE_16BIT)
+ {
+ /* 16-bit scale for the filter */
+ hcan->Instance->FS1R &= ~(uint32_t)filternbrbitpos;
+
+ /* First 16-bit identifier and First 16-bit mask */
+ /* Or First 16-bit identifier and Second 16-bit identifier */
+ hcan->Instance->sFilterRegister[sFilterConfig->FilterNumber].FR1 =
+ ((0x0000FFFF & (uint32_t)sFilterConfig->FilterMaskIdLow) << 16) |
+ (0x0000FFFF & (uint32_t)sFilterConfig->FilterIdLow);
+
+ /* Second 16-bit identifier and Second 16-bit mask */
+ /* Or Third 16-bit identifier and Fourth 16-bit identifier */
+ hcan->Instance->sFilterRegister[sFilterConfig->FilterNumber].FR2 =
+ ((0x0000FFFF & (uint32_t)sFilterConfig->FilterMaskIdHigh) << 16) |
+ (0x0000FFFF & (uint32_t)sFilterConfig->FilterIdHigh);
+ }
+
+ if (sFilterConfig->FilterScale == CAN_FILTERSCALE_32BIT)
+ {
+ /* 32-bit scale for the filter */
+ hcan->Instance->FS1R |= filternbrbitpos;
+ /* 32-bit identifier or First 32-bit identifier */
+ hcan->Instance->sFilterRegister[sFilterConfig->FilterNumber].FR1 =
+ ((0x0000FFFF & (uint32_t)sFilterConfig->FilterIdHigh) << 16) |
+ (0x0000FFFF & (uint32_t)sFilterConfig->FilterIdLow);
+ /* 32-bit mask or Second 32-bit identifier */
+ hcan->Instance->sFilterRegister[sFilterConfig->FilterNumber].FR2 =
+ ((0x0000FFFF & (uint32_t)sFilterConfig->FilterMaskIdHigh) << 16) |
+ (0x0000FFFF & (uint32_t)sFilterConfig->FilterMaskIdLow);
+ }
+
+ /* Filter Mode */
+ if (sFilterConfig->FilterMode == CAN_FILTERMODE_IDMASK)
+ {
+ /*Id/Mask mode for the filter*/
+ hcan->Instance->FM1R &= ~(uint32_t)filternbrbitpos;
+ }
+ else /* CAN_FilterInitStruct->CAN_FilterMode == CAN_FilterMode_IdList */
+ {
+ /*Identifier list mode for the filter*/
+ hcan->Instance->FM1R |= (uint32_t)filternbrbitpos;
+ }
+
+ /* Filter FIFO assignment */
+ if (sFilterConfig->FilterFIFOAssignment == CAN_FILTER_FIFO0)
+ {
+ /* FIFO 0 assignation for the filter */
+ hcan->Instance->FFA1R &= ~(uint32_t)filternbrbitpos;
+ }
+
+ if (sFilterConfig->FilterFIFOAssignment == CAN_FILTER_FIFO1)
+ {
+ /* FIFO 1 assignation for the filter */
+ hcan->Instance->FFA1R |= (uint32_t)filternbrbitpos;
+ }
+
+ /* Filter activation */
+ if (sFilterConfig->FilterActivation == ENABLE)
+ {
+ hcan->Instance->FA1R |= filternbrbitpos;
+ }
+
+ /* Leave the initialisation mode for the filter */
+ hcan->Instance->FMR &= ~((uint32_t)CAN_FMR_FINIT);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Deinitializes the CANx peripheral registers to their default reset values.
+ * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
+ * the configuration information for the specified CAN.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CAN_DeInit(CAN_HandleTypeDef* hcan)
+{
+ /* Check CAN handle */
+ if(hcan == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_INSTANCE(hcan->Instance));
+
+ /* Change CAN state */
+ hcan->State = HAL_CAN_STATE_BUSY;
+
+ /* DeInit the low level hardware */
+ HAL_CAN_MspDeInit(hcan);
+
+ /* Change CAN state */
+ hcan->State = HAL_CAN_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hcan);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CAN MSP.
+ * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
+ * the configuration information for the specified CAN.
+ * @retval None
+ */
+__weak void HAL_CAN_MspInit(CAN_HandleTypeDef* hcan)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_CAN_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes the CAN MSP.
+ * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
+ * the configuration information for the specified CAN.
+ * @retval None
+ */
+__weak void HAL_CAN_MspDeInit(CAN_HandleTypeDef* hcan)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_CAN_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Exported_Functions_Group2 I/O operation functions
+ * @brief I/O operation functions
+ *
+@verbatim
+ ==============================================================================
+ ##### IO operation functions #####
+ ==============================================================================
+ [..] This section provides functions allowing to:
+ (+) Transmit a CAN frame message.
+ (+) Receive a CAN frame message.
+ (+) Enter CAN peripheral in sleep mode.
+ (+) Wake up the CAN peripheral from sleep mode.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initiates and transmits a CAN frame message.
+ * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
+ * the configuration information for the specified CAN.
+ * @param Timeout: Timeout duration.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CAN_Transmit(CAN_HandleTypeDef* hcan, uint32_t Timeout)
+{
+ uint32_t transmitmailbox = CAN_TXSTATUS_NOMAILBOX;
+ uint32_t tickstart = 0;
+
+ /* Check the parameters */
+ assert_param(IS_CAN_IDTYPE(hcan->pTxMsg->IDE));
+ assert_param(IS_CAN_RTR(hcan->pTxMsg->RTR));
+ assert_param(IS_CAN_DLC(hcan->pTxMsg->DLC));
+
+ /* Process locked */
+ __HAL_LOCK(hcan);
+
+ if(hcan->State == HAL_CAN_STATE_BUSY_RX)
+ {
+ /* Change CAN state */
+ hcan->State = HAL_CAN_STATE_BUSY_TX_RX;
+ }
+ else
+ {
+ /* Change CAN state */
+ hcan->State = HAL_CAN_STATE_BUSY_TX;
+ }
+
+ /* Select one empty transmit mailbox */
+ if ((hcan->Instance->TSR&CAN_TSR_TME0) == CAN_TSR_TME0)
+ {
+ transmitmailbox = 0;
+ }
+ else if ((hcan->Instance->TSR&CAN_TSR_TME1) == CAN_TSR_TME1)
+ {
+ transmitmailbox = 1;
+ }
+ else if ((hcan->Instance->TSR&CAN_TSR_TME2) == CAN_TSR_TME2)
+ {
+ transmitmailbox = 2;
+ }
+
+ if (transmitmailbox != CAN_TXSTATUS_NOMAILBOX)
+ {
+ /* Set up the Id */
+ hcan->Instance->sTxMailBox[transmitmailbox].TIR &= CAN_TI0R_TXRQ;
+ if (hcan->pTxMsg->IDE == CAN_ID_STD)
+ {
+ assert_param(IS_CAN_STDID(hcan->pTxMsg->StdId));
+ hcan->Instance->sTxMailBox[transmitmailbox].TIR |= ((hcan->pTxMsg->StdId << 21) | \
+ hcan->pTxMsg->RTR);
+ }
+ else
+ {
+ assert_param(IS_CAN_EXTID(hcan->pTxMsg->ExtId));
+ hcan->Instance->sTxMailBox[transmitmailbox].TIR |= ((hcan->pTxMsg->ExtId << 3) | \
+ hcan->pTxMsg->IDE | \
+ hcan->pTxMsg->RTR);
+ }
+
+ /* Set up the DLC */
+ hcan->pTxMsg->DLC &= (uint8_t)0x0000000F;
+ hcan->Instance->sTxMailBox[transmitmailbox].TDTR &= (uint32_t)0xFFFFFFF0;
+ hcan->Instance->sTxMailBox[transmitmailbox].TDTR |= hcan->pTxMsg->DLC;
+
+ /* Set up the data field */
+ hcan->Instance->sTxMailBox[transmitmailbox].TDLR = (((uint32_t)hcan->pTxMsg->Data[3] << 24) |
+ ((uint32_t)hcan->pTxMsg->Data[2] << 16) |
+ ((uint32_t)hcan->pTxMsg->Data[1] << 8) |
+ ((uint32_t)hcan->pTxMsg->Data[0]));
+ hcan->Instance->sTxMailBox[transmitmailbox].TDHR = (((uint32_t)hcan->pTxMsg->Data[7] << 24) |
+ ((uint32_t)hcan->pTxMsg->Data[6] << 16) |
+ ((uint32_t)hcan->pTxMsg->Data[5] << 8) |
+ ((uint32_t)hcan->pTxMsg->Data[4]));
+ /* Request transmission */
+ hcan->Instance->sTxMailBox[transmitmailbox].TIR |= CAN_TI0R_TXRQ;
+
+ /* Get timeout */
+ tickstart = HAL_GetTick();
+
+ /* Check End of transmission flag */
+ while(!(__HAL_CAN_TRANSMIT_STATUS(hcan, transmitmailbox)))
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0) || ((HAL_GetTick() - tickstart) > Timeout))
+ {
+ hcan->State = HAL_CAN_STATE_TIMEOUT;
+ /* Process unlocked */
+ __HAL_UNLOCK(hcan);
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ if(hcan->State == HAL_CAN_STATE_BUSY_TX_RX)
+ {
+ /* Change CAN state */
+ hcan->State = HAL_CAN_STATE_BUSY_RX;
+ }
+ else
+ {
+ /* Change CAN state */
+ hcan->State = HAL_CAN_STATE_READY;
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hcan);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else
+ {
+ /* Change CAN state */
+ hcan->State = HAL_CAN_STATE_ERROR;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hcan);
+
+ /* Return function status */
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Initiates and transmits a CAN frame message.
+ * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
+ * the configuration information for the specified CAN.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CAN_Transmit_IT(CAN_HandleTypeDef* hcan)
+{
+ uint32_t transmitmailbox = CAN_TXSTATUS_NOMAILBOX;
+
+ /* Check the parameters */
+ assert_param(IS_CAN_IDTYPE(hcan->pTxMsg->IDE));
+ assert_param(IS_CAN_RTR(hcan->pTxMsg->RTR));
+ assert_param(IS_CAN_DLC(hcan->pTxMsg->DLC));
+
+ if((hcan->State == HAL_CAN_STATE_READY) || (hcan->State == HAL_CAN_STATE_BUSY_RX))
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcan);
+
+ /* Select one empty transmit mailbox */
+ if((hcan->Instance->TSR&CAN_TSR_TME0) == CAN_TSR_TME0)
+ {
+ transmitmailbox = 0;
+ }
+ else if((hcan->Instance->TSR&CAN_TSR_TME1) == CAN_TSR_TME1)
+ {
+ transmitmailbox = 1;
+ }
+ else if((hcan->Instance->TSR&CAN_TSR_TME2) == CAN_TSR_TME2)
+ {
+ transmitmailbox = 2;
+ }
+
+ if(transmitmailbox != CAN_TXSTATUS_NOMAILBOX)
+ {
+ /* Set up the Id */
+ hcan->Instance->sTxMailBox[transmitmailbox].TIR &= CAN_TI0R_TXRQ;
+ if(hcan->pTxMsg->IDE == CAN_ID_STD)
+ {
+ assert_param(IS_CAN_STDID(hcan->pTxMsg->StdId));
+ hcan->Instance->sTxMailBox[transmitmailbox].TIR |= ((hcan->pTxMsg->StdId << 21) | \
+ hcan->pTxMsg->RTR);
+ }
+ else
+ {
+ assert_param(IS_CAN_EXTID(hcan->pTxMsg->ExtId));
+ hcan->Instance->sTxMailBox[transmitmailbox].TIR |= ((hcan->pTxMsg->ExtId << 3) | \
+ hcan->pTxMsg->IDE | \
+ hcan->pTxMsg->RTR);
+ }
+
+ /* Set up the DLC */
+ hcan->pTxMsg->DLC &= (uint8_t)0x0000000F;
+ hcan->Instance->sTxMailBox[transmitmailbox].TDTR &= (uint32_t)0xFFFFFFF0;
+ hcan->Instance->sTxMailBox[transmitmailbox].TDTR |= hcan->pTxMsg->DLC;
+
+ /* Set up the data field */
+ hcan->Instance->sTxMailBox[transmitmailbox].TDLR = (((uint32_t)hcan->pTxMsg->Data[3] << 24) |
+ ((uint32_t)hcan->pTxMsg->Data[2] << 16) |
+ ((uint32_t)hcan->pTxMsg->Data[1] << 8) |
+ ((uint32_t)hcan->pTxMsg->Data[0]));
+ hcan->Instance->sTxMailBox[transmitmailbox].TDHR = (((uint32_t)hcan->pTxMsg->Data[7] << 24) |
+ ((uint32_t)hcan->pTxMsg->Data[6] << 16) |
+ ((uint32_t)hcan->pTxMsg->Data[5] << 8) |
+ ((uint32_t)hcan->pTxMsg->Data[4]));
+
+ if(hcan->State == HAL_CAN_STATE_BUSY_RX)
+ {
+ /* Change CAN state */
+ hcan->State = HAL_CAN_STATE_BUSY_TX_RX;
+ }
+ else
+ {
+ /* Change CAN state */
+ hcan->State = HAL_CAN_STATE_BUSY_TX;
+ }
+
+ /* Set CAN error code to none */
+ hcan->ErrorCode = HAL_CAN_ERROR_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcan);
+
+ /* Enable Error warning Interrupt */
+ __HAL_CAN_ENABLE_IT(hcan, CAN_IT_EWG);
+
+ /* Enable Error passive Interrupt */
+ __HAL_CAN_ENABLE_IT(hcan, CAN_IT_EPV);
+
+ /* Enable Bus-off Interrupt */
+ __HAL_CAN_ENABLE_IT(hcan, CAN_IT_BOF);
+
+ /* Enable Last error code Interrupt */
+ __HAL_CAN_ENABLE_IT(hcan, CAN_IT_LEC);
+
+ /* Enable Error Interrupt */
+ __HAL_CAN_ENABLE_IT(hcan, CAN_IT_ERR);
+
+ /* Enable Transmit mailbox empty Interrupt */
+ __HAL_CAN_ENABLE_IT(hcan, CAN_IT_TME);
+
+ /* Request transmission */
+ hcan->Instance->sTxMailBox[transmitmailbox].TIR |= CAN_TI0R_TXRQ;
+ }
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Receives a correct CAN frame.
+ * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
+ * the configuration information for the specified CAN.
+ * @param FIFONumber: FIFO number.
+ * @param Timeout: Timeout duration.
+ * @retval HAL status
+ * @retval None
+ */
+HAL_StatusTypeDef HAL_CAN_Receive(CAN_HandleTypeDef* hcan, uint8_t FIFONumber, uint32_t Timeout)
+{
+ uint32_t tickstart = 0;
+
+ /* Check the parameters */
+ assert_param(IS_CAN_FIFO(FIFONumber));
+
+ /* Process locked */
+ __HAL_LOCK(hcan);
+
+ if(hcan->State == HAL_CAN_STATE_BUSY_TX)
+ {
+ /* Change CAN state */
+ hcan->State = HAL_CAN_STATE_BUSY_TX_RX;
+ }
+ else
+ {
+ /* Change CAN state */
+ hcan->State = HAL_CAN_STATE_BUSY_RX;
+ }
+
+ /* Get timeout */
+ tickstart = HAL_GetTick();
+
+ /* Check pending message */
+ while(__HAL_CAN_MSG_PENDING(hcan, FIFONumber) == 0)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0) || ((HAL_GetTick() - tickstart) > Timeout))
+ {
+ hcan->State = HAL_CAN_STATE_TIMEOUT;
+ /* Process unlocked */
+ __HAL_UNLOCK(hcan);
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Get the Id */
+ hcan->pRxMsg->IDE = (uint8_t)0x04 & hcan->Instance->sFIFOMailBox[FIFONumber].RIR;
+ if (hcan->pRxMsg->IDE == CAN_ID_STD)
+ {
+ hcan->pRxMsg->StdId = (uint32_t)0x000007FF & (hcan->Instance->sFIFOMailBox[FIFONumber].RIR >> 21);
+ }
+ else
+ {
+ hcan->pRxMsg->ExtId = (uint32_t)0x1FFFFFFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RIR >> 3);
+ }
+
+ hcan->pRxMsg->RTR = (uint8_t)0x02 & hcan->Instance->sFIFOMailBox[FIFONumber].RIR;
+ /* Get the DLC */
+ hcan->pRxMsg->DLC = (uint8_t)0x0F & hcan->Instance->sFIFOMailBox[FIFONumber].RDTR;
+ /* Get the FMI */
+ hcan->pRxMsg->FMI = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDTR >> 8);
+ /* Get the data field */
+ hcan->pRxMsg->Data[0] = (uint8_t)0xFF & hcan->Instance->sFIFOMailBox[FIFONumber].RDLR;
+ hcan->pRxMsg->Data[1] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 8);
+ hcan->pRxMsg->Data[2] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 16);
+ hcan->pRxMsg->Data[3] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 24);
+ hcan->pRxMsg->Data[4] = (uint8_t)0xFF & hcan->Instance->sFIFOMailBox[FIFONumber].RDHR;
+ hcan->pRxMsg->Data[5] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 8);
+ hcan->pRxMsg->Data[6] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 16);
+ hcan->pRxMsg->Data[7] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 24);
+
+ /* Release the FIFO */
+ if(FIFONumber == CAN_FIFO0)
+ {
+ /* Release FIFO0 */
+ __HAL_CAN_FIFO_RELEASE(hcan, CAN_FIFO0);
+ }
+ else /* FIFONumber == CAN_FIFO1 */
+ {
+ /* Release FIFO1 */
+ __HAL_CAN_FIFO_RELEASE(hcan, CAN_FIFO1);
+ }
+
+ if(hcan->State == HAL_CAN_STATE_BUSY_TX_RX)
+ {
+ /* Change CAN state */
+ hcan->State = HAL_CAN_STATE_BUSY_TX;
+ }
+ else
+ {
+ /* Change CAN state */
+ hcan->State = HAL_CAN_STATE_READY;
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hcan);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Receives a correct CAN frame.
+ * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
+ * the configuration information for the specified CAN.
+ * @param FIFONumber: FIFO number.
+ * @retval HAL status
+ * @retval None
+ */
+HAL_StatusTypeDef HAL_CAN_Receive_IT(CAN_HandleTypeDef* hcan, uint8_t FIFONumber)
+{
+ /* Check the parameters */
+ assert_param(IS_CAN_FIFO(FIFONumber));
+
+ if((hcan->State == HAL_CAN_STATE_READY) || (hcan->State == HAL_CAN_STATE_BUSY_TX))
+ {
+ /* Process locked */
+ __HAL_LOCK(hcan);
+
+ if(hcan->State == HAL_CAN_STATE_BUSY_TX)
+ {
+ /* Change CAN state */
+ hcan->State = HAL_CAN_STATE_BUSY_TX_RX;
+ }
+ else
+ {
+ /* Change CAN state */
+ hcan->State = HAL_CAN_STATE_BUSY_RX;
+ }
+
+ /* Set CAN error code to none */
+ hcan->ErrorCode = HAL_CAN_ERROR_NONE;
+
+ /* Enable Error warning Interrupt */
+ __HAL_CAN_ENABLE_IT(hcan, CAN_IT_EWG);
+
+ /* Enable Error passive Interrupt */
+ __HAL_CAN_ENABLE_IT(hcan, CAN_IT_EPV);
+
+ /* Enable Bus-off Interrupt */
+ __HAL_CAN_ENABLE_IT(hcan, CAN_IT_BOF);
+
+ /* Enable Last error code Interrupt */
+ __HAL_CAN_ENABLE_IT(hcan, CAN_IT_LEC);
+
+ /* Enable Error Interrupt */
+ __HAL_CAN_ENABLE_IT(hcan, CAN_IT_ERR);
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hcan);
+
+ if(FIFONumber == CAN_FIFO0)
+ {
+ /* Enable FIFO 0 message pending Interrupt */
+ __HAL_CAN_ENABLE_IT(hcan, CAN_IT_FMP0);
+ }
+ else
+ {
+ /* Enable FIFO 1 message pending Interrupt */
+ __HAL_CAN_ENABLE_IT(hcan, CAN_IT_FMP1);
+ }
+
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Enters the Sleep (low power) mode.
+ * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
+ * the configuration information for the specified CAN.
+ * @retval HAL status.
+ */
+HAL_StatusTypeDef HAL_CAN_Sleep(CAN_HandleTypeDef* hcan)
+{
+ uint32_t tickstart = 0;
+
+ /* Process locked */
+ __HAL_LOCK(hcan);
+
+ /* Change CAN state */
+ hcan->State = HAL_CAN_STATE_BUSY;
+
+ /* Request Sleep mode */
+ hcan->Instance->MCR = (((hcan->Instance->MCR) & (uint32_t)(~(uint32_t)CAN_MCR_INRQ)) | CAN_MCR_SLEEP);
+
+ /* Sleep mode status */
+ if ((hcan->Instance->MSR & (CAN_MSR_SLAK|CAN_MSR_INAK)) != CAN_MSR_SLAK)
+ {
+ /* Process unlocked */
+ __HAL_UNLOCK(hcan);
+
+ /* Return function status */
+ return HAL_ERROR;
+ }
+
+ /* Get timeout */
+ tickstart = HAL_GetTick();
+
+ /* Wait the acknowledge */
+ while((hcan->Instance->MSR & (CAN_MSR_SLAK|CAN_MSR_INAK)) != CAN_MSR_SLAK)
+ {
+ if((HAL_GetTick() - tickstart) > HAL_CAN_DEFAULT_TIMEOUT)
+ {
+ hcan->State = HAL_CAN_STATE_TIMEOUT;
+ /* Process unlocked */
+ __HAL_UNLOCK(hcan);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Change CAN state */
+ hcan->State = HAL_CAN_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hcan);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Wakes up the CAN peripheral from sleep mode, after that the CAN peripheral
+ * is in the normal mode.
+ * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
+ * the configuration information for the specified CAN.
+ * @retval HAL status.
+ */
+HAL_StatusTypeDef HAL_CAN_WakeUp(CAN_HandleTypeDef* hcan)
+{
+ uint32_t tickstart = 0;
+
+ /* Process locked */
+ __HAL_LOCK(hcan);
+
+ /* Change CAN state */
+ hcan->State = HAL_CAN_STATE_BUSY;
+
+ /* Wake up request */
+ hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_SLEEP;
+
+ /* Get timeout */
+ tickstart = HAL_GetTick();
+
+ /* Sleep mode status */
+ while((hcan->Instance->MSR & CAN_MSR_SLAK) == CAN_MSR_SLAK)
+ {
+ if((HAL_GetTick() - tickstart) > HAL_CAN_DEFAULT_TIMEOUT)
+ {
+ hcan->State= HAL_CAN_STATE_TIMEOUT;
+ /* Process unlocked */
+ __HAL_UNLOCK(hcan);
+ return HAL_TIMEOUT;
+ }
+ }
+ if((hcan->Instance->MSR & CAN_MSR_SLAK) == CAN_MSR_SLAK)
+ {
+ /* Process unlocked */
+ __HAL_UNLOCK(hcan);
+
+ /* Return function status */
+ return HAL_ERROR;
+ }
+
+ /* Change CAN state */
+ hcan->State = HAL_CAN_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hcan);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Handles CAN interrupt request
+ * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
+ * the configuration information for the specified CAN.
+ * @retval None
+ */
+void HAL_CAN_IRQHandler(CAN_HandleTypeDef* hcan)
+{
+ /* Check End of transmission flag */
+ if(__HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_TME))
+ {
+ if((__HAL_CAN_TRANSMIT_STATUS(hcan, CAN_TXMAILBOX_0)) ||
+ (__HAL_CAN_TRANSMIT_STATUS(hcan, CAN_TXMAILBOX_1)) ||
+ (__HAL_CAN_TRANSMIT_STATUS(hcan, CAN_TXMAILBOX_2)))
+ {
+ /* Call transmit function */
+ CAN_Transmit_IT(hcan);
+ }
+ }
+
+ /* Check End of reception flag for FIFO0 */
+ if((__HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_FMP0)) &&
+ (__HAL_CAN_MSG_PENDING(hcan, CAN_FIFO0) != 0))
+ {
+ /* Call receive function */
+ CAN_Receive_IT(hcan, CAN_FIFO0);
+ }
+
+ /* Check End of reception flag for FIFO1 */
+ if((__HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_FMP1)) &&
+ (__HAL_CAN_MSG_PENDING(hcan, CAN_FIFO1) != 0))
+ {
+ /* Call receive function */
+ CAN_Receive_IT(hcan, CAN_FIFO1);
+ }
+
+ /* Check Error Warning Flag */
+ if((__HAL_CAN_GET_FLAG(hcan, CAN_FLAG_EWG)) &&
+ (__HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_EWG)) &&
+ (__HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_ERR)))
+ {
+ /* Set CAN error code to EWG error */
+ hcan->ErrorCode |= HAL_CAN_ERROR_EWG;
+ /* No need for clear of Error Warning Flag as read-only */
+ }
+
+ /* Check Error Passive Flag */
+ if((__HAL_CAN_GET_FLAG(hcan, CAN_FLAG_EPV)) &&
+ (__HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_EPV)) &&
+ (__HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_ERR)))
+ {
+ /* Set CAN error code to EPV error */
+ hcan->ErrorCode |= HAL_CAN_ERROR_EPV;
+ /* No need for clear of Error Passive Flag as read-only */
+ }
+
+ /* Check Bus-Off Flag */
+ if((__HAL_CAN_GET_FLAG(hcan, CAN_FLAG_BOF)) &&
+ (__HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_BOF)) &&
+ (__HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_ERR)))
+ {
+ /* Set CAN error code to BOF error */
+ hcan->ErrorCode |= HAL_CAN_ERROR_BOF;
+ /* No need for clear of Bus-Off Flag as read-only */
+ }
+
+ /* Check Last error code Flag */
+ if((!HAL_IS_BIT_CLR(hcan->Instance->ESR, CAN_ESR_LEC)) &&
+ (__HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_LEC)) &&
+ (__HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_ERR)))
+ {
+ switch(hcan->Instance->ESR & CAN_ESR_LEC)
+ {
+ case(CAN_ESR_LEC_0):
+ /* Set CAN error code to STF error */
+ hcan->ErrorCode |= HAL_CAN_ERROR_STF;
+ break;
+ case(CAN_ESR_LEC_1):
+ /* Set CAN error code to FOR error */
+ hcan->ErrorCode |= HAL_CAN_ERROR_FOR;
+ break;
+ case(CAN_ESR_LEC_1 | CAN_ESR_LEC_0):
+ /* Set CAN error code to ACK error */
+ hcan->ErrorCode |= HAL_CAN_ERROR_ACK;
+ break;
+ case(CAN_ESR_LEC_2):
+ /* Set CAN error code to BR error */
+ hcan->ErrorCode |= HAL_CAN_ERROR_BR;
+ break;
+ case(CAN_ESR_LEC_2 | CAN_ESR_LEC_0):
+ /* Set CAN error code to BD error */
+ hcan->ErrorCode |= HAL_CAN_ERROR_BD;
+ break;
+ case(CAN_ESR_LEC_2 | CAN_ESR_LEC_1):
+ /* Set CAN error code to CRC error */
+ hcan->ErrorCode |= HAL_CAN_ERROR_CRC;
+ break;
+ default:
+ break;
+ }
+
+ /* Clear Last error code Flag */
+ hcan->Instance->ESR &= ~(CAN_ESR_LEC);
+ }
+
+ /* Call the Error call Back in case of Errors */
+ if(hcan->ErrorCode != HAL_CAN_ERROR_NONE)
+ {
+ /* Set the CAN state ready to be able to start again the process */
+ hcan->State = HAL_CAN_STATE_READY;
+ /* Call Error callback function */
+ HAL_CAN_ErrorCallback(hcan);
+ }
+}
+
+/**
+ * @brief Transmission complete callback in non blocking mode
+ * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
+ * the configuration information for the specified CAN.
+ * @retval None
+ */
+__weak void HAL_CAN_TxCpltCallback(CAN_HandleTypeDef* hcan)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_CAN_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Transmission complete callback in non blocking mode
+ * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
+ * the configuration information for the specified CAN.
+ * @retval None
+ */
+__weak void HAL_CAN_RxCpltCallback(CAN_HandleTypeDef* hcan)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_CAN_RxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Error CAN callback.
+ * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
+ * the configuration information for the specified CAN.
+ * @retval None
+ */
+__weak void HAL_CAN_ErrorCallback(CAN_HandleTypeDef *hcan)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_CAN_ErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Exported_Functions_Group3 Peripheral State and Error functions
+ * @brief CAN Peripheral State functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral State and Error functions #####
+ ==============================================================================
+ [..]
+ This subsection provides functions allowing to :
+ (+) Check the CAN state.
+ (+) Check CAN Errors detected during interrupt process
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief return the CAN state
+ * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
+ * the configuration information for the specified CAN.
+ * @retval HAL state
+ */
+HAL_CAN_StateTypeDef HAL_CAN_GetState(CAN_HandleTypeDef* hcan)
+{
+ /* Return CAN state */
+ return hcan->State;
+}
+
+/**
+ * @brief Return the CAN error code
+ * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
+ * the configuration information for the specified CAN.
+ * @retval CAN Error Code
+ */
+uint32_t HAL_CAN_GetError(CAN_HandleTypeDef *hcan)
+{
+ return hcan->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup CAN_Private_Functions CAN Private Functions
+ * @brief CAN Frame message Rx/Tx functions
+ *
+ * @{
+ */
+
+/**
+ * @brief Initiates and transmits a CAN frame message.
+ * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
+ * the configuration information for the specified CAN.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef CAN_Transmit_IT(CAN_HandleTypeDef* hcan)
+{
+ /* Disable Transmit mailbox empty Interrupt */
+ __HAL_CAN_DISABLE_IT(hcan, CAN_IT_TME);
+
+ if(hcan->State == HAL_CAN_STATE_BUSY_TX)
+ {
+ /* Disable Error warning Interrupt */
+ __HAL_CAN_DISABLE_IT(hcan, CAN_IT_EWG);
+
+ /* Disable Error passive Interrupt */
+ __HAL_CAN_DISABLE_IT(hcan, CAN_IT_EPV);
+
+ /* Disable Bus-off Interrupt */
+ __HAL_CAN_DISABLE_IT(hcan, CAN_IT_BOF);
+
+ /* Disable Last error code Interrupt */
+ __HAL_CAN_DISABLE_IT(hcan, CAN_IT_LEC);
+
+ /* Disable Error Interrupt */
+ __HAL_CAN_DISABLE_IT(hcan, CAN_IT_ERR);
+ }
+
+ if(hcan->State == HAL_CAN_STATE_BUSY_TX_RX)
+ {
+ /* Change CAN state */
+ hcan->State = HAL_CAN_STATE_BUSY_RX;
+ }
+ else
+ {
+ /* Change CAN state */
+ hcan->State = HAL_CAN_STATE_READY;
+ }
+
+ /* Transmission complete callback */
+ HAL_CAN_TxCpltCallback(hcan);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Receives a correct CAN frame.
+ * @param hcan: Pointer to a CAN_HandleTypeDef structure that contains
+ * the configuration information for the specified CAN.
+ * @param FIFONumber: Specify the FIFO number
+ * @retval HAL status
+ * @retval None
+ */
+static HAL_StatusTypeDef CAN_Receive_IT(CAN_HandleTypeDef* hcan, uint8_t FIFONumber)
+{
+ /* Get the Id */
+ hcan->pRxMsg->IDE = (uint8_t)0x04 & hcan->Instance->sFIFOMailBox[FIFONumber].RIR;
+ if (hcan->pRxMsg->IDE == CAN_ID_STD)
+ {
+ hcan->pRxMsg->StdId = (uint32_t)0x000007FF & (hcan->Instance->sFIFOMailBox[FIFONumber].RIR >> 21);
+ }
+ else
+ {
+ hcan->pRxMsg->ExtId = (uint32_t)0x1FFFFFFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RIR >> 3);
+ }
+
+ hcan->pRxMsg->RTR = (uint8_t)0x02 & hcan->Instance->sFIFOMailBox[FIFONumber].RIR;
+ /* Get the DLC */
+ hcan->pRxMsg->DLC = (uint8_t)0x0F & hcan->Instance->sFIFOMailBox[FIFONumber].RDTR;
+ /* Get the FMI */
+ hcan->pRxMsg->FMI = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDTR >> 8);
+ /* Get the data field */
+ hcan->pRxMsg->Data[0] = (uint8_t)0xFF & hcan->Instance->sFIFOMailBox[FIFONumber].RDLR;
+ hcan->pRxMsg->Data[1] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 8);
+ hcan->pRxMsg->Data[2] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 16);
+ hcan->pRxMsg->Data[3] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 24);
+ hcan->pRxMsg->Data[4] = (uint8_t)0xFF & hcan->Instance->sFIFOMailBox[FIFONumber].RDHR;
+ hcan->pRxMsg->Data[5] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 8);
+ hcan->pRxMsg->Data[6] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 16);
+ hcan->pRxMsg->Data[7] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 24);
+ /* Release the FIFO */
+ /* Release FIFO0 */
+ if (FIFONumber == CAN_FIFO0)
+ {
+ __HAL_CAN_FIFO_RELEASE(hcan, CAN_FIFO0);
+
+ /* Disable FIFO 0 message pending Interrupt */
+ __HAL_CAN_DISABLE_IT(hcan, CAN_IT_FMP0);
+ }
+ /* Release FIFO1 */
+ else /* FIFONumber == CAN_FIFO1 */
+ {
+ __HAL_CAN_FIFO_RELEASE(hcan, CAN_FIFO1);
+
+ /* Disable FIFO 1 message pending Interrupt */
+ __HAL_CAN_DISABLE_IT(hcan, CAN_IT_FMP1);
+ }
+
+ if(hcan->State == HAL_CAN_STATE_BUSY_RX)
+ {
+ /* Disable Error warning Interrupt */
+ __HAL_CAN_DISABLE_IT(hcan, CAN_IT_EWG);
+
+ /* Disable Error passive Interrupt */
+ __HAL_CAN_DISABLE_IT(hcan, CAN_IT_EPV);
+
+ /* Disable Bus-off Interrupt */
+ __HAL_CAN_DISABLE_IT(hcan, CAN_IT_BOF);
+
+ /* Disable Last error code Interrupt */
+ __HAL_CAN_DISABLE_IT(hcan, CAN_IT_LEC);
+
+ /* Disable Error Interrupt */
+ __HAL_CAN_DISABLE_IT(hcan, CAN_IT_ERR);
+ }
+
+ if(hcan->State == HAL_CAN_STATE_BUSY_TX_RX)
+ {
+ /* Disable CAN state */
+ hcan->State = HAL_CAN_STATE_BUSY_TX;
+ }
+ else
+ {
+ /* Change CAN state */
+ hcan->State = HAL_CAN_STATE_READY;
+ }
+
+ /* Receive complete callback */
+ HAL_CAN_RxCpltCallback(hcan);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined(STM32F072xB) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F091xC) || defined(STM32F098xx) */
+
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/src/stm32f0xx_hal_cec.c b/f0/src/stm32f0xx_hal_cec.c
new file mode 100755
index 0000000000000000000000000000000000000000..0615354c4faa46ea710b0fd61f63c829240910f9
--- /dev/null
+++ b/f0/src/stm32f0xx_hal_cec.c
@@ -0,0 +1,1119 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_cec.c
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief CEC HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the High Definition Multimedia Interface
+ * Consumer Electronics Control Peripheral (CEC).
+ * + Initialization and de-initialization function
+ * + IO operation function
+ * + Peripheral Control function
+ *
+ @verbatim
+ ===============================================================================
+ ##### How to use this driver #####
+ ===============================================================================
+ [..]
+ The CEC HAL driver can be used as follows:
+
+ (#) Declare a CEC_HandleTypeDef handle structure.
+ (#) Initialize the CEC low level resources by implementing the HAL_CEC_MspInit ()API:
+ (++) Enable the CEC interface clock.
+ (++) CEC pins configuration:
+ (+++) Enable the clock for the CEC GPIOs.
+ (+++) Configure these CEC pins as alternate function pull-up.
+ (++) NVIC configuration if you need to use interrupt process (HAL_CEC_Transmit_IT()
+ and HAL_CEC_Receive_IT() APIs):
+ (+++) Configure the CEC interrupt priority.
+ (+++) Enable the NVIC CEC IRQ handle.
+
+ (#) Program the Signal Free Time (SFT) and SFT option, Tolerance, reception stop in
+ in case of Bit Rising Error, Error-Bit generation conditions, device logical
+ address and Listen mode in the hcec Init structure.
+
+ (#) Initialize the CEC registers by calling the HAL_CEC_Init() API.
+ (++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc)
+ by calling the customed HAL_CEC_MspInit() API.
+
+ -@@- The specific CEC interrupts (Transmission complete interrupt,
+ RXNE interrupt and Error Interrupts) will be managed using the macros
+ __HAL_CEC_ENABLE_IT() and __HAL_CEC_DISABLE_IT() inside the transmit
+ and receive process.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+#ifdef HAL_CEC_MODULE_ENABLED
+
+#if defined(STM32F042x6) || defined(STM32F048xx) ||\
+ defined(STM32F051x8) || defined(STM32F058xx) ||\
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) ||\
+ defined(STM32F091xC) || defined (STM32F098xx)
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup CEC CEC HAL Module Driver
+ * @brief HAL CEC module driver
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup CEC_Private_Constants CEC Private Constants
+ * @{
+ */
+#define CEC_CFGR_FIELDS (CEC_CFGR_SFT | CEC_CFGR_RXTOL | CEC_CFGR_BRESTP \
+ | CEC_CFGR_BREGEN | CEC_CFGR_LBPEGEN | CEC_CFGR_SFTOPT \
+ | CEC_CFGR_BRDNOGEN | CEC_CFGR_OAR | CEC_CFGR_LSTN)
+/**
+ * @}
+ */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup CEC_Private_Functions CEC Private Functions
+ * @{
+ */
+static HAL_StatusTypeDef CEC_Transmit_IT(CEC_HandleTypeDef *hcec);
+static HAL_StatusTypeDef CEC_Receive_IT(CEC_HandleTypeDef *hcec);
+/**
+ * @}
+ */
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup CEC_Exported_Functions CEC Exported Functions
+ * @{
+ */
+
+/** @defgroup CEC_Exported_Functions_Group1 Initialization/de-initialization function
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+===============================================================================
+ ##### Initialization and Configuration functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to initialize the CEC
+ (+) The following parameters need to be configured:
+ (++) SignalFreeTime
+ (++) Tolerance
+ (++) BRERxStop (RX stopped or not upon Bit Rising Error)
+ (++) BREErrorBitGen (Error-Bit generation in case of Bit Rising Error)
+ (++) LBPEErrorBitGen (Error-Bit generation in case of Long Bit Period Error)
+ (++) BroadcastMsgNoErrorBitGen (Error-bit generation in case of broadcast message error)
+ (++) SignalFreeTimeOption (SFT Timer start definition)
+ (++) OwnAddress (CEC device address)
+ (++) ListenMode
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the CEC mode according to the specified
+ * parameters in the CEC_InitTypeDef and creates the associated handle .
+ * @param hcec: CEC handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CEC_Init(CEC_HandleTypeDef *hcec)
+{
+ uint32_t tmpreg = 0x0;
+
+ /* Check the CEC handle allocation */
+ if(hcec == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_CEC_SIGNALFREETIME(hcec->Init.SignalFreeTime));
+ assert_param(IS_CEC_TOLERANCE(hcec->Init.Tolerance));
+ assert_param(IS_CEC_BRERXSTOP(hcec->Init.BRERxStop));
+ assert_param(IS_CEC_BREERRORBITGEN(hcec->Init.BREErrorBitGen));
+ assert_param(IS_CEC_LBPEERRORBITGEN(hcec->Init.LBPEErrorBitGen));
+ assert_param(IS_CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION(hcec->Init.BroadcastMsgNoErrorBitGen));
+ assert_param(IS_CEC_SFTOP(hcec->Init.SignalFreeTimeOption));
+ assert_param(IS_CEC_OAR_ADDRESS(hcec->Init.OwnAddress));
+ assert_param(IS_CEC_LISTENING_MODE(hcec->Init.ListenMode));
+ assert_param(IS_CEC_ADDRESS(hcec->Init.InitiatorAddress));
+
+
+ if(hcec->State == HAL_CEC_STATE_RESET)
+ {
+ /* Init the low level hardware : GPIO, CLOCK */
+ HAL_CEC_MspInit(hcec);
+ }
+
+ hcec->State = HAL_CEC_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_CEC_DISABLE(hcec);
+
+ tmpreg = hcec->Init.SignalFreeTime;
+ tmpreg |= hcec->Init.Tolerance;
+ tmpreg |= hcec->Init.BRERxStop;
+ tmpreg |= hcec->Init.BREErrorBitGen;
+ tmpreg |= hcec->Init.LBPEErrorBitGen;
+ tmpreg |= hcec->Init.BroadcastMsgNoErrorBitGen;
+ tmpreg |= hcec->Init.SignalFreeTimeOption;
+ tmpreg |= (hcec->Init.OwnAddress << CEC_CFGR_OAR_LSB_POS);
+ tmpreg |= hcec->Init.ListenMode;
+
+ /* Write to CEC Control Register */
+ MODIFY_REG(hcec->Instance->CFGR, CEC_CFGR_FIELDS, tmpreg);
+
+ /* Enable the Peripheral */
+ __HAL_CEC_ENABLE(hcec);
+
+ hcec->State = HAL_CEC_STATE_READY;
+
+ return HAL_OK;
+}
+
+
+
+/**
+ * @brief DeInitializes the CEC peripheral
+ * @param hcec: CEC handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CEC_DeInit(CEC_HandleTypeDef *hcec)
+{
+ /* Check the CEC handle allocation */
+ if(hcec == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_CEC_ALL_INSTANCE(hcec->Instance));
+
+ hcec->State = HAL_CEC_STATE_BUSY;
+
+ /* DeInit the low level hardware */
+ HAL_CEC_MspDeInit(hcec);
+ /* Disable the Peripheral */
+ __HAL_CEC_DISABLE(hcec);
+
+ hcec->ErrorCode = HAL_CEC_ERROR_NONE;
+ hcec->State = HAL_CEC_STATE_RESET;
+
+ /* Process Unlock */
+ __HAL_UNLOCK(hcec);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief CEC MSP Init
+ * @param hcec: CEC handle
+ * @retval None
+ */
+ __weak void HAL_CEC_MspInit(CEC_HandleTypeDef *hcec)
+{
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_CEC_MspInit can be implemented in the user file
+ */
+}
+
+/**
+ * @brief CEC MSP DeInit
+ * @param hcec: CEC handle
+ * @retval None
+ */
+ __weak void HAL_CEC_MspDeInit(CEC_HandleTypeDef *hcec)
+{
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_CEC_MspDeInit can be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Exported_Functions_Group2 IO operation function
+ * @brief CEC Transmit/Receive functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation function #####
+ ===============================================================================
+ This subsection provides a set of functions allowing to manage the CEC data transfers.
+
+ (#) The CEC handle must contain the initiator (TX side) and the destination (RX side)
+ logical addresses (4-bit long addresses, 0xF for broadcast messages destination)
+
+ (#) There are two mode of transfer:
+ (+) Blocking mode: The communication is performed in polling mode.
+ The HAL status of all data processing is returned by the same function
+ after finishing transfer.
+ (+) Non Blocking mode: The communication is performed using Interrupts.
+ These API's return the HAL status.
+ The end of the data processing will be indicated through the
+ dedicated CEC IRQ when using Interrupt mode.
+ The HAL_CEC_TxCpltCallback(), HAL_CEC_RxCpltCallback() user callbacks
+ will be executed respectivelly at the end of the transmit or Receive process
+ The HAL_CEC_ErrorCallback()user callback will be executed when a communication
+ error is detected
+
+ (#) Blocking mode API s are :
+ (+) HAL_CEC_Transmit()
+ (+) HAL_CEC_Receive()
+
+ (#) Non-Blocking mode API s with Interrupt are :
+ (+) HAL_CEC_Transmit_IT()
+ (+) HAL_CEC_Receive_IT()
+ (+) HAL_CEC_IRQHandler()
+
+ (#) A set of Transfer Complete Callbacks are provided in No_Blocking mode:
+ (+) HAL_CEC_TxCpltCallback()
+ (+) HAL_CEC_RxCpltCallback()
+ (+) HAL_CEC_ErrorCallback()
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Send data in blocking mode
+ * @param hcec: CEC handle
+ * @param DestinationAddress: destination logical address
+ * @param pData: pointer to input byte data buffer
+ * @param Size: amount of data to be sent in bytes (without counting the header).
+ * 0 means only the header is sent (ping operation).
+ * Maximum TX size is 15 bytes (1 opcode and up to 14 operands).
+ * @param Timeout: Timeout duration.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CEC_Transmit(CEC_HandleTypeDef *hcec, uint8_t DestinationAddress, uint8_t *pData, uint32_t Size, uint32_t Timeout)
+{
+ uint8_t temp = 0;
+ uint32_t tempisr = 0;
+ uint32_t tickstart = 0;
+
+ if((hcec->State == HAL_CEC_STATE_READY) && (__HAL_CEC_GET_TRANSMISSION_START_FLAG(hcec) == RESET))
+ {
+ hcec->ErrorCode = HAL_CEC_ERROR_NONE;
+ if((pData == NULL ) && (Size > 0))
+ {
+ hcec->State = HAL_CEC_STATE_ERROR;
+ return HAL_ERROR;
+ }
+
+ assert_param(IS_CEC_ADDRESS(DestinationAddress));
+ assert_param(IS_CEC_MSGSIZE(Size));
+
+ /* Process Locked */
+ __HAL_LOCK(hcec);
+
+ hcec->State = HAL_CEC_STATE_BUSY_TX;
+
+ hcec->TxXferCount = Size;
+
+ /* case no data to be sent, sender is only pinging the system */
+ if (Size == 0)
+ {
+ /* Set TX End of Message (TXEOM) bit, must be set before writing data to TXDR */
+ __HAL_CEC_LAST_BYTE_TX_SET(hcec);
+ }
+
+ /* send header block */
+ temp = ((uint32_t)hcec->Init.InitiatorAddress << CEC_INITIATOR_LSB_POS) | DestinationAddress;
+ hcec->Instance->TXDR = temp;
+ /* Set TX Start of Message (TXSOM) bit */
+ __HAL_CEC_FIRST_BYTE_TX_SET(hcec);
+
+ while (hcec->TxXferCount > 0)
+ {
+ hcec->TxXferCount--;
+
+ tickstart = HAL_GetTick();
+ while(HAL_IS_BIT_CLR(hcec->Instance->ISR, CEC_ISR_TXBR))
+ {
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0) || ((HAL_GetTick() - tickstart) > Timeout))
+ {
+ hcec->State = HAL_CEC_STATE_READY;
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcec);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* check whether error occured while waiting for TXBR to be set:
+ * has Tx underrun occurred ?
+ * has Tx error occurred ?
+ * has Tx Missing Acknowledge error occurred ?
+ * has Arbitration Loss error occurred ? */
+ tempisr = hcec->Instance->ISR;
+ if ((tempisr & (CEC_ISR_TXUDR|CEC_ISR_TXERR|CEC_ISR_TXACKE|CEC_ISR_ARBLST)) != 0)
+ {
+ /* copy ISR for error handling purposes */
+ hcec->ErrorCode = tempisr;
+ /* clear all error flags by default */
+ __HAL_CEC_CLEAR_FLAG(hcec, (CEC_ISR_TXUDR|CEC_ISR_TXERR|CEC_ISR_TXACKE|CEC_ISR_ARBLST));
+ hcec->State = HAL_CEC_STATE_ERROR;
+ __HAL_UNLOCK(hcec);
+ return HAL_ERROR;
+ }
+ }
+ /* TXBR to clear BEFORE writing TXDR register */
+ __HAL_CEC_CLEAR_FLAG(hcec,CEC_ISR_TXBR);
+ if (hcec->TxXferCount == 0)
+ {
+ /* if last byte transmission, set TX End of Message (TXEOM) bit */
+ __HAL_CEC_LAST_BYTE_TX_SET(hcec);
+ }
+ hcec->Instance->TXDR = *pData++;
+
+ /* error check after TX byte write up */
+ tempisr = hcec->Instance->ISR;
+ if ((tempisr & (CEC_ISR_TXUDR|CEC_ISR_TXERR|CEC_ISR_TXACKE|CEC_ISR_ARBLST)) != 0)
+ {
+ /* copy ISR for error handling purposes */
+ hcec->ErrorCode = tempisr;
+ /* clear all error flags by default */
+ __HAL_CEC_CLEAR_FLAG(hcec, (CEC_ISR_TXUDR|CEC_ISR_TXERR|CEC_ISR_TXACKE|CEC_ISR_ARBLST));
+ hcec->State = HAL_CEC_STATE_ERROR;
+ __HAL_UNLOCK(hcec);
+ return HAL_ERROR;
+ }
+ } /* end while (while (hcec->TxXferCount > 0)) */
+
+
+ /* if no error up to this point, check that transmission is
+ * complete, that is wait until TXEOM is reset */
+ tickstart = HAL_GetTick();
+
+ while (HAL_IS_BIT_SET(hcec->Instance->CR, CEC_CR_TXEOM))
+ {
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0) || ((HAL_GetTick() - tickstart) > Timeout))
+ {
+ hcec->State = HAL_CEC_STATE_ERROR;
+ __HAL_UNLOCK(hcec);
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Final error check once all bytes have been transmitted */
+ tempisr = hcec->Instance->ISR;
+ if ((tempisr & (CEC_ISR_TXUDR|CEC_ISR_TXERR|CEC_ISR_TXACKE)) != 0)
+ {
+ /* copy ISR for error handling purposes */
+ hcec->ErrorCode = tempisr;
+ /* clear all error flags by default */
+ __HAL_CEC_CLEAR_FLAG(hcec, (CEC_ISR_TXUDR|CEC_ISR_TXERR|CEC_ISR_TXACKE));
+ hcec->State = HAL_CEC_STATE_ERROR;
+ __HAL_UNLOCK(hcec);
+ return HAL_ERROR;
+ }
+
+ hcec->State = HAL_CEC_STATE_READY;
+ __HAL_UNLOCK(hcec);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive data in blocking mode. Must be invoked when RXBR has been set.
+ * @param hcec: CEC handle
+ * @param pData: pointer to received data buffer.
+ * @param Timeout: Timeout duration.
+ * Note that the received data size is not known beforehand, the latter is known
+ * when the reception is complete and is stored in hcec->RxXferSize.
+ * hcec->RxXferSize is the sum of opcodes + operands (0 to 14 operands max).
+ * If only a header is received, hcec->RxXferSize = 0
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CEC_Receive(CEC_HandleTypeDef *hcec, uint8_t *pData, uint32_t Timeout)
+{
+ uint32_t temp;
+ uint32_t tickstart = 0;
+
+ if (hcec->State == HAL_CEC_STATE_READY)
+ {
+ hcec->ErrorCode = HAL_CEC_ERROR_NONE;
+ if (pData == NULL )
+ {
+ hcec->State = HAL_CEC_STATE_ERROR;
+ return HAL_ERROR;
+ }
+
+ hcec->RxXferSize = 0;
+ /* Process Locked */
+ __HAL_LOCK(hcec);
+
+
+ /* Rx loop until CEC_ISR_RXEND is set */
+ while (HAL_IS_BIT_CLR(hcec->Instance->ISR, CEC_ISR_RXEND))
+ {
+ tickstart = HAL_GetTick();
+ /* Wait for next byte to be received */
+ while (HAL_IS_BIT_CLR(hcec->Instance->ISR, CEC_ISR_RXBR))
+ {
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0) || ((HAL_GetTick() - tickstart) > Timeout))
+ {
+ hcec->State = HAL_CEC_STATE_READY;
+ __HAL_UNLOCK(hcec);
+ return HAL_TIMEOUT;
+ }
+ }
+ /* any error so far ?
+ * has Rx Missing Acknowledge occurred ?
+ * has Rx Long Bit Period error occurred ?
+ * has Rx Short Bit Period error occurred ?
+ * has Rx Bit Rising error occurred ?
+ * has Rx Overrun error occurred ? */
+ temp = (uint32_t) (hcec->Instance->ISR);
+ if ((temp & (CEC_ISR_RXACKE|CEC_ISR_LBPE|CEC_ISR_SBPE|CEC_ISR_BRE|CEC_ISR_RXOVR)) != 0)
+ {
+ /* copy ISR for error handling purposes */
+ hcec->ErrorCode = temp;
+ /* clear all error flags by default */
+ __HAL_CEC_CLEAR_FLAG(hcec, (CEC_ISR_RXACKE|CEC_ISR_LBPE|CEC_ISR_SBPE|CEC_ISR_BRE|CEC_ISR_RXOVR));
+ hcec->State = HAL_CEC_STATE_ERROR;
+ __HAL_UNLOCK(hcec);
+ return HAL_ERROR;
+ }
+ } /* while (HAL_IS_BIT_CLR(hcec->Instance->ISR, CEC_ISR_RXBR)) */
+
+
+ /* read received data */
+ *pData++ = hcec->Instance->RXDR;
+ temp = (uint32_t) (hcec->Instance->ISR);
+ /* end of message ? */
+ if ((temp & CEC_ISR_RXEND) != 0)
+ {
+ assert_param(IS_CEC_MSGSIZE(hcec->RxXferSize));
+ __HAL_CEC_CLEAR_FLAG(hcec,CEC_ISR_RXEND);
+ hcec->State = HAL_CEC_STATE_READY;
+ __HAL_UNLOCK(hcec);
+ return HAL_OK;
+ }
+
+ /* clear Rx-Byte Received flag */
+ __HAL_CEC_CLEAR_FLAG(hcec,CEC_ISR_RXBR);
+ /* increment payload byte counter */
+ hcec->RxXferSize++;
+ } /* while (HAL_IS_BIT_CLR(hcec->Instance->ISR, CEC_ISR_RXEND)) */
+
+ /* if the instructions below are executed, it means RXEND was set when RXBR was
+ * set for the first time:
+ * the code within the "while (HAL_IS_BIT_CLR(hcec->Instance->ISR, CEC_ISR_RXEND))"
+ * loop has not been executed and this means a single byte has been sent */
+ *pData++ = hcec->Instance->RXDR;
+ /* only one header is received: RxXferSize is set to 0 (no operand, no opcode) */
+ hcec->RxXferSize = 0;
+ __HAL_CEC_CLEAR_FLAG(hcec,CEC_ISR_RXEND);
+
+ hcec->State = HAL_CEC_STATE_READY;
+ __HAL_UNLOCK(hcec);
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+
+/**
+ * @brief Send data in interrupt mode
+ * @param hcec: CEC handle
+ * @param DestinationAddress: destination logical address
+ * @param pData: pointer to input byte data buffer
+ * @param Size: amount of data to be sent in bytes (without counting the header).
+ * 0 means only the header is sent (ping operation).
+ * Maximum TX size is 15 bytes (1 opcode and up to 14 operands).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CEC_Transmit_IT(CEC_HandleTypeDef *hcec, uint8_t DestinationAddress, uint8_t *pData, uint32_t Size)
+{
+ uint8_t temp = 0;
+ /* if the IP isn't already busy and if there is no previous transmission
+ already pending due to arbitration lost */
+ if (((hcec->State == HAL_CEC_STATE_READY) || (hcec->State == HAL_CEC_STATE_STANDBY_RX))
+ && (__HAL_CEC_GET_TRANSMISSION_START_FLAG(hcec) == RESET))
+ {
+ if((pData == NULL ) && (Size > 0))
+ {
+ hcec->State = HAL_CEC_STATE_ERROR;
+ return HAL_ERROR;
+ }
+
+ assert_param(IS_CEC_ADDRESS(DestinationAddress));
+ assert_param(IS_CEC_MSGSIZE(Size));
+
+ /* Process Locked */
+ __HAL_LOCK(hcec);
+ hcec->pTxBuffPtr = pData;
+ hcec->State = HAL_CEC_STATE_BUSY_TX;
+ hcec->ErrorCode = HAL_CEC_ERROR_NONE;
+
+ /* Disable Peripheral to write CEC_IER register */
+ __HAL_CEC_DISABLE(hcec);
+
+ /* Enable the following two CEC Transmission interrupts as
+ * well as the following CEC Transmission Errors interrupts:
+ * Tx Byte Request IT
+ * End of Transmission IT
+ * Tx Missing Acknowledge IT
+ * Tx-Error IT
+ * Tx-Buffer Underrun IT
+ * Tx arbitration lost */
+ __HAL_CEC_ENABLE_IT(hcec, CEC_IER_TXBRIE|CEC_IER_TXENDIE|CEC_IER_TX_ALL_ERR);
+
+ /* Enable the Peripheral */
+ __HAL_CEC_ENABLE(hcec);
+
+ /* initialize the number of bytes to send,
+ * 0 means only one header is sent (ping operation) */
+ hcec->TxXferCount = Size;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcec);
+
+ /* in case of no payload (Size = 0), sender is only pinging the system;
+ * Set TX End of Message (TXEOM) bit, must be set before writing data to TXDR */
+ if (Size == 0)
+ {
+ __HAL_CEC_LAST_BYTE_TX_SET(hcec);
+ }
+
+ /* send header block */
+ temp = ((uint32_t)hcec->Init.InitiatorAddress << CEC_INITIATOR_LSB_POS) | DestinationAddress;
+ hcec->Instance->TXDR = temp;
+ /* Set TX Start of Message (TXSOM) bit */
+ __HAL_CEC_FIRST_BYTE_TX_SET(hcec);
+
+ return HAL_OK;
+ }
+ /* if the IP is already busy or if there is a previous transmission
+ already pending due to arbitration loss */
+ else if ((hcec->State == HAL_CEC_STATE_BUSY_TX)
+ || (__HAL_CEC_GET_TRANSMISSION_START_FLAG(hcec) != RESET))
+ {
+ __HAL_LOCK(hcec);
+ /* set state to BUSY TX, in case it wasn't set already (case
+ * of transmission new attempt after arbitration loss) */
+ if (hcec->State != HAL_CEC_STATE_BUSY_TX)
+ {
+ hcec->State = HAL_CEC_STATE_BUSY_TX;
+ }
+
+ /* if all data have been sent */
+ if(hcec->TxXferCount == 0)
+ {
+ /* Disable Peripheral to write CEC_IER register */
+ __HAL_CEC_DISABLE(hcec);
+
+ /* Disable the CEC Transmission Interrupts */
+ __HAL_CEC_DISABLE_IT(hcec, CEC_IER_TXBRIE|CEC_IER_TXENDIE);
+ /* Disable the CEC Transmission Error Interrupts */
+ __HAL_CEC_DISABLE_IT(hcec, CEC_IER_TX_ALL_ERR);
+
+ /* Enable the Peripheral */
+ __HAL_CEC_ENABLE(hcec);
+
+ __HAL_CEC_CLEAR_FLAG(hcec,CEC_ISR_TXBR|CEC_ISR_TXEND);
+
+ hcec->State = HAL_CEC_STATE_READY;
+ /* Call the Process Unlocked before calling the Tx call back API to give the possibility to
+ start again the Transmission under the Tx call back API */
+ __HAL_UNLOCK(hcec);
+
+ HAL_CEC_TxCpltCallback(hcec);
+
+ return HAL_OK;
+ }
+ else
+ {
+ if (hcec->TxXferCount == 1)
+ {
+ /* if this is the last byte transmission, set TX End of Message (TXEOM) bit */
+ __HAL_CEC_LAST_BYTE_TX_SET(hcec);
+ }
+ /* clear Tx-Byte request flag */
+ __HAL_CEC_CLEAR_FLAG(hcec,CEC_ISR_TXBR);
+ hcec->Instance->TXDR = *hcec->pTxBuffPtr++;
+ hcec->TxXferCount--;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcec);
+
+ return HAL_OK;
+ }
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+
+/**
+ * @brief Receive data in interrupt mode.
+ * @param hcec: CEC handle
+ * @param pData: pointer to received data buffer.
+ * Note that the received data size is not known beforehand, the latter is known
+ * when the reception is complete and is stored in hcec->RxXferSize.
+ * hcec->RxXferSize is the sum of opcodes + operands (0 to 14 operands max).
+ * If only a header is received, hcec->RxXferSize = 0
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CEC_Receive_IT(CEC_HandleTypeDef *hcec, uint8_t *pData)
+{
+ if(hcec->State == HAL_CEC_STATE_READY)
+ {
+ if(pData == NULL )
+ {
+ hcec->State = HAL_CEC_STATE_ERROR;
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hcec);
+ hcec->RxXferSize = 0;
+ hcec->pRxBuffPtr = pData;
+ hcec->ErrorCode = HAL_CEC_ERROR_NONE;
+ /* the IP is moving to a ready to receive state */
+ hcec->State = HAL_CEC_STATE_STANDBY_RX;
+
+ /* Disable Peripheral to write CEC_IER register */
+ __HAL_CEC_DISABLE(hcec);
+
+ /* Enable the following CEC Reception Error Interrupts:
+ * Rx overrun
+ * Rx bit rising error
+ * Rx short bit period error
+ * Rx long bit period error
+ * Rx missing acknowledge */
+ __HAL_CEC_ENABLE_IT(hcec, CEC_IER_RX_ALL_ERR);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcec);
+
+ /* Enable the following two CEC Reception interrupts:
+ * Rx Byte Received IT
+ * End of Reception IT */
+ __HAL_CEC_ENABLE_IT(hcec, CEC_IER_RXBRIE|CEC_IER_RXENDIE);
+
+ __HAL_CEC_ENABLE(hcec);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+
+
+/**
+ * @brief This function handles CEC interrupt requests.
+ * @param hcec: CEC handle
+ * @retval None
+ */
+void HAL_CEC_IRQHandler(CEC_HandleTypeDef *hcec)
+{
+ /* save interrupts register for further error or interrupts handling purposes */
+ hcec->ErrorCode = hcec->Instance->ISR;
+ /* CEC TX missing acknowledge error interrupt occurred -------------------------------------*/
+ if((__HAL_CEC_GET_IT(hcec, CEC_ISR_TXACKE) != RESET) && (__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IER_TXACKEIE) != RESET))
+ {
+ __HAL_CEC_CLEAR_FLAG(hcec, CEC_ISR_TXACKE);
+ hcec->State = HAL_CEC_STATE_ERROR;
+ }
+
+ /* CEC transmit error interrupt occured --------------------------------------*/
+ if((__HAL_CEC_GET_IT(hcec, CEC_ISR_TXERR) != RESET) && (__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IER_TXERRIE) != RESET))
+ {
+ __HAL_CEC_CLEAR_FLAG(hcec, CEC_ISR_TXERR);
+ hcec->State = HAL_CEC_STATE_ERROR;
+ }
+
+ /* CEC TX underrun error interrupt occured --------------------------------------*/
+ if((__HAL_CEC_GET_IT(hcec, CEC_ISR_TXUDR) != RESET) && (__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IER_TXUDRIE) != RESET))
+ {
+ __HAL_CEC_CLEAR_FLAG(hcec, CEC_ISR_TXUDR);
+ hcec->State = HAL_CEC_STATE_ERROR;
+ }
+
+ /* CEC TX arbitration error interrupt occured --------------------------------------*/
+ if((__HAL_CEC_GET_IT(hcec, CEC_ISR_ARBLST) != RESET) && (__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IER_ARBLSTIE) != RESET))
+ {
+ __HAL_CEC_CLEAR_FLAG(hcec, CEC_ISR_ARBLST);
+ hcec->State = HAL_CEC_STATE_ERROR;
+ }
+
+ /* CEC RX overrun error interrupt occured --------------------------------------*/
+ if((__HAL_CEC_GET_IT(hcec, CEC_ISR_RXOVR) != RESET) && (__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IER_RXOVRIE) != RESET))
+ {
+ __HAL_CEC_CLEAR_FLAG(hcec, CEC_ISR_RXOVR);
+ hcec->State = HAL_CEC_STATE_ERROR;
+ }
+
+ /* CEC RX bit rising error interrupt occured --------------------------------------*/
+ if((__HAL_CEC_GET_IT(hcec, CEC_ISR_BRE) != RESET) && (__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IER_BREIE) != RESET))
+ {
+ __HAL_CEC_CLEAR_FLAG(hcec, CEC_ISR_BRE);
+ hcec->State = HAL_CEC_STATE_ERROR;
+ }
+
+ /* CEC RX short bit period error interrupt occured --------------------------------------*/
+ if((__HAL_CEC_GET_IT(hcec, CEC_ISR_SBPE) != RESET) && (__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IER_SBPEIE) != RESET))
+ {
+ __HAL_CEC_CLEAR_FLAG(hcec, CEC_ISR_SBPE);
+ hcec->State = HAL_CEC_STATE_ERROR;
+ }
+
+ /* CEC RX long bit period error interrupt occured --------------------------------------*/
+ if((__HAL_CEC_GET_IT(hcec, CEC_ISR_LBPE) != RESET) && (__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IER_LBPEIE) != RESET))
+ {
+ __HAL_CEC_CLEAR_FLAG(hcec, CEC_ISR_LBPE);
+ hcec->State = HAL_CEC_STATE_ERROR;
+ }
+
+ /* CEC RX missing acknowledge error interrupt occured --------------------------------------*/
+ if((__HAL_CEC_GET_IT(hcec, CEC_ISR_RXACKE) != RESET) && (__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IER_RXACKEIE) != RESET))
+ {
+ __HAL_CEC_CLEAR_FLAG(hcec, CEC_ISR_RXACKE);
+ hcec->State = HAL_CEC_STATE_ERROR;
+ }
+
+ if ((hcec->ErrorCode & CEC_ISR_ALL_ERROR) != 0)
+ {
+ HAL_CEC_ErrorCallback(hcec);
+ }
+
+ /* CEC RX byte received interrupt ---------------------------------------------------*/
+ if((__HAL_CEC_GET_IT(hcec, CEC_ISR_RXBR) != RESET) && (__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IER_RXBRIE) != RESET))
+ {
+ /* RXBR IT is cleared during HAL_CEC_Transmit_IT processing */
+ CEC_Receive_IT(hcec);
+ }
+
+ /* CEC RX end received interrupt ---------------------------------------------------*/
+ if((__HAL_CEC_GET_IT(hcec, CEC_ISR_RXEND) != RESET) && (__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IER_RXENDIE) != RESET))
+ {
+ /* RXBR IT is cleared during HAL_CEC_Transmit_IT processing */
+ CEC_Receive_IT(hcec);
+ }
+
+
+ /* CEC TX byte request interrupt ------------------------------------------------*/
+ if((__HAL_CEC_GET_IT(hcec, CEC_ISR_TXBR) != RESET) &&(__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IER_TXBRIE) != RESET))
+ {
+ /* TXBR IT is cleared during HAL_CEC_Transmit_IT processing */
+ CEC_Transmit_IT(hcec);
+ }
+
+ /* CEC TX end interrupt ------------------------------------------------*/
+ if((__HAL_CEC_GET_IT(hcec, CEC_ISR_TXEND) != RESET) &&(__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IER_TXENDIE) != RESET))
+ {
+ /* TXEND IT is cleared during HAL_CEC_Transmit_IT processing */
+ CEC_Transmit_IT(hcec);
+ }
+
+}
+
+
+/**
+ * @brief Tx Transfer completed callback
+ * @param hcec: CEC handle
+ * @retval None
+ */
+ __weak void HAL_CEC_TxCpltCallback(CEC_HandleTypeDef *hcec)
+{
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_CEC_TxCpltCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Transfer completed callback
+ * @param hcec: CEC handle
+ * @retval None
+ */
+__weak void HAL_CEC_RxCpltCallback(CEC_HandleTypeDef *hcec)
+{
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_CEC_TxCpltCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief CEC error callbacks
+ * @param hcec: CEC handle
+ * @retval None
+ */
+ __weak void HAL_CEC_ErrorCallback(CEC_HandleTypeDef *hcec)
+{
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_CEC_ErrorCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Exported_Functions_Group3 Peripheral Control function
+ * @brief CEC control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control function #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the CEC.
+ (+) HAL_CEC_GetState() API can be helpful to check in run-time the state of the CEC peripheral.
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief return the CEC state
+ * @param hcec: CEC handle
+ * @retval HAL state
+ */
+HAL_CEC_StateTypeDef HAL_CEC_GetState(CEC_HandleTypeDef *hcec)
+{
+ return hcec->State;
+}
+
+/**
+* @brief Return the CEC error code
+* @param hcec : pointer to a CEC_HandleTypeDef structure that contains
+ * the configuration information for the specified CEC.
+* @retval CEC Error Code
+*/
+uint32_t HAL_CEC_GetError(CEC_HandleTypeDef *hcec)
+{
+ return hcec->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Private_Functions CEC Private Functions
+ * @{
+ */
+
+/**
+ * @brief Send data in interrupt mode
+ * @param hcec: CEC handle.
+ * Function called under interruption only, once
+ * interruptions have been enabled by HAL_CEC_Transmit_IT()
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef CEC_Transmit_IT(CEC_HandleTypeDef *hcec)
+{
+ /* if the IP is already busy or if there is a previous transmission
+ already pending due to arbitration loss */
+ if ((hcec->State == HAL_CEC_STATE_BUSY_TX)
+ || (__HAL_CEC_GET_TRANSMISSION_START_FLAG(hcec) != RESET))
+ {
+
+ /* set state to BUSY TX, in case it wasn't set already (case
+ * of transmission new attempt after arbitration loss) */
+ if (hcec->State != HAL_CEC_STATE_BUSY_TX)
+ {
+ hcec->State = HAL_CEC_STATE_BUSY_TX;
+ }
+
+ /* if all data have been sent */
+ if(hcec->TxXferCount == 0)
+ {
+ /* Disable Peripheral to write CEC_IER register */
+ __HAL_CEC_DISABLE(hcec);
+
+ /* Disable the CEC Transmission Interrupts */
+ __HAL_CEC_DISABLE_IT(hcec, CEC_IER_TXBRIE|CEC_IER_TXENDIE);
+ /* Disable the CEC Transmission Error Interrupts */
+ __HAL_CEC_DISABLE_IT(hcec, CEC_IER_TX_ALL_ERR);
+
+ /* Enable the Peripheral */
+ __HAL_CEC_ENABLE(hcec);
+
+ __HAL_CEC_CLEAR_FLAG(hcec,CEC_ISR_TXBR|CEC_ISR_TXEND);
+
+ /* If RX interruptions are enabled, return to HAL_CEC_STATE_STANDBY_RX state */
+ if (__HAL_CEC_GET_IT_SOURCE(hcec, (CEC_IER_RXBRIE|CEC_IER_RXENDIE) ) != RESET)
+ {
+ hcec->State = HAL_CEC_STATE_STANDBY_RX;
+ }
+ else
+ {
+ hcec->State = HAL_CEC_STATE_READY;
+ }
+
+ HAL_CEC_TxCpltCallback(hcec);
+
+ return HAL_OK;
+ }
+ else
+ {
+ if (hcec->TxXferCount == 1)
+ {
+ /* if this is the last byte transmission, set TX End of Message (TXEOM) bit */
+ __HAL_CEC_LAST_BYTE_TX_SET(hcec);
+ }
+ /* clear Tx-Byte request flag */
+ __HAL_CEC_CLEAR_FLAG(hcec,CEC_ISR_TXBR);
+ hcec->Instance->TXDR = *hcec->pTxBuffPtr++;
+ hcec->TxXferCount--;
+
+ return HAL_OK;
+ }
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+
+/**
+ * @brief Receive data in interrupt mode.
+ * @param hcec: CEC handle.
+ * Function called under interruption only, once
+ * interruptions have been enabled by HAL_CEC_Receive_IT()
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef CEC_Receive_IT(CEC_HandleTypeDef *hcec)
+{
+ uint32_t tempisr;
+
+ /* Three different conditions are tested to carry out the RX IT processing:
+ * - the IP is in reception stand-by (the IP state is HAL_CEC_STATE_STANDBY_RX) and
+ * the reception of the first byte is starting
+ * - a message reception is already on-going (the IP state is HAL_CEC_STATE_BUSY_RX)
+ * and a new byte is being received
+ * - a transmission has just been started (the IP state is HAL_CEC_STATE_BUSY_TX)
+ * but has been interrupted by a new message reception or discarded due to
+ * arbitration loss: the reception of the first or higher priority message
+ * (the arbitration winner) is starting */
+ if ((hcec->State == HAL_CEC_STATE_STANDBY_RX)
+ || (hcec->State == HAL_CEC_STATE_BUSY_RX)
+ || (hcec->State == HAL_CEC_STATE_BUSY_TX))
+ {
+ /* reception is starting */
+ hcec->State = HAL_CEC_STATE_BUSY_RX;
+ tempisr = (uint32_t) (hcec->Instance->ISR);
+ if ((tempisr & CEC_ISR_RXBR) != 0)
+ {
+ /* read received byte */
+ *hcec->pRxBuffPtr++ = hcec->Instance->RXDR;
+ /* if last byte has been received */
+ if ((tempisr & CEC_ISR_RXEND) != 0)
+ {
+ /* clear IT */
+ __HAL_CEC_CLEAR_FLAG(hcec,CEC_ISR_RXBR|CEC_ISR_RXEND);
+ /* RX interrupts are not disabled at this point.
+ * Indeed, to disable the IT, the IP must be disabled first
+ * which resets the TXSOM flag. In case of arbitration loss,
+ * this leads to a transmission abort.
+ * Therefore, RX interruptions disabling if so required,
+ * is done in HAL_CEC_RxCpltCallback */
+
+ /* IP state is moved to READY.
+ * If the IP must remain in standby mode to listen
+ * any new message, it is up to HAL_CEC_RxCpltCallback
+ * to move it again to HAL_CEC_STATE_STANDBY_RX */
+ hcec->State = HAL_CEC_STATE_READY;
+
+ HAL_CEC_RxCpltCallback(hcec);
+
+ return HAL_OK;
+ }
+ __HAL_CEC_CLEAR_FLAG(hcec, CEC_ISR_RXBR);
+
+ hcec->RxXferSize++;
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F051x8) || defined(STM32F058xx) || */
+ /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || */
+ /* defined(STM32F091xC) || defined (STM32F098xx) */
+
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/src/stm32f0xx_hal_comp.c b/f0/src/stm32f0xx_hal_comp.c
new file mode 100755
index 0000000000000000000000000000000000000000..6868b120e2cf47717cbe44263bef70857346ec52
--- /dev/null
+++ b/f0/src/stm32f0xx_hal_comp.c
@@ -0,0 +1,695 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_comp.c
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief COMP HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the COMP peripheral:
+ * + Initialization/de-initialization functions
+ * + I/O operation functions
+ * + Peripheral Control functions
+ * + Peripheral State functions
+ *
+ @verbatim
+================================================================================
+ ##### COMP Peripheral features #####
+================================================================================
+
+ [..]
+ The STM32F0xx device family integrates up to 2 analog comparators COMP1 and COMP2:
+ (#) The non inverting input and inverting input can be set to GPIO pins
+ as shown in table1. COMP Inputs below.
+
+ (#) The COMP output is available using HAL_COMP_GetOutputLevel()
+ and can be set on GPIO pins. Refer to table 2. COMP Outputs below.
+
+ (#) The COMP output can be redirected to embedded timers (TIM1, TIM2 and TIM3)
+ Refer to table 3. COMP Outputs redirection to embedded timers below.
+
+ (#) The comparators COMP1 and COMP2 can be combined in window mode.
+
+ (#) The comparators have interrupt capability with wake-up
+ from Sleep and Stop modes (through the EXTI controller):
+ (++) COMP1 is internally connected to EXTI Line 21
+ (++) COMP2 is internally connected to EXTI Line 22
+ From the corresponding IRQ handler, the right interrupt source can be retrieved with the
+ macro __HAL_COMP_EXTI_GET_FLAG(). Possible values are:
+ (++) COMP_EXTI_LINE_COMP1_EVENT
+ (++) COMP_EXTI_LINE_COMP2_EVENT
+
+
+[..] Table 1. COMP Inputs for the STM32F05x, STM32F07x and STM32F09x devices
+ +--------------------------------------------------+
+ | | | COMP1 | COMP2 |
+ |-----------------|----------------|---------------|
+ | | 1/4 VREFINT | OK | OK |
+ | | 1/2 VREFINT | OK | OK |
+ | | 3/4 VREFINT | OK | OK |
+ | Inverting Input | VREFINT | OK | OK |
+ | | DAC1 OUT (PA4) | OK | OK |
+ | | DAC2 OUT (PA5) | OK | OK |
+ | | IO1 | PA0 | PA2 |
+ |-----------------|----------------|-------|-------|
+ | Non Inverting | | PA1 | PA3 |
+ | Input | | | |
+ +--------------------------------------------------+
+
+ [..] Table 2. COMP Outputs for the STM32F05x, STM32F07x and STM32F09x devices
+ +---------------+
+ | COMP1 | COMP2 |
+ |-------|-------|
+ | PA0 | PA2 |
+ | PA6 | PA7 |
+ | PA11 | PA12 |
+ +---------------+
+
+ [..] Table 3. COMP Outputs redirection to embedded timers for the STM32F05x, STM32F07x and STM32F09x devices
+ +---------------------------------+
+ | COMP1 | COMP2 |
+ |----------------|----------------|
+ | TIM1 BKIN | TIM1 BKIN |
+ | | |
+ | TIM1 OCREFCLR | TIM1 OCREFCLR |
+ | | |
+ | TIM1 IC1 | TIM1 IC1 |
+ | | |
+ | TIM2 IC4 | TIM2 IC4 |
+ | | |
+ | TIM2 OCREFCLR | TIM2 OCREFCLR |
+ | | |
+ | TIM3 IC1 | TIM3 IC1 |
+ | | |
+ | TIM3 OCREFCLR | TIM3 OCREFCLR |
+ +---------------------------------+
+
+ ##### How to use this driver #####
+================================================================================
+ [..]
+ This driver provides functions to configure and program the Comparators of STM32F05x, STM32F07x and STM32F09x devices.
+
+ To use the comparator, perform the following steps:
+
+ (#) Fill in the HAL_COMP_MspInit() to
+ (++) Configure the comparator input in analog mode using HAL_GPIO_Init()
+ (++) Configure the comparator output in alternate function mode using HAL_GPIO_Init() to map the comparator
+ output to the GPIO pin
+ (++) If required enable the COMP interrupt by configuring and enabling EXTI line in Interrupt mode and
+ selecting the desired sensitivity level using HAL_GPIO_Init() function. After that enable the comparator
+ interrupt vector using HAL_NVIC_EnableIRQ() function.
+
+ (#) Configure the comparator using HAL_COMP_Init() function:
+ (++) Select the inverting input
+ (++) Select the non inverting input
+ (++) Select the output polarity
+ (++) Select the output redirection
+ (++) Select the hysteresis level
+ (++) Select the power mode
+ (++) Select the event/interrupt mode
+
+ (#) Enable the comparator using HAL_COMP_Start() function or HAL_COMP_Start_IT() function for interrupt mode
+
+ (#) Read the comparator output level with HAL_COMP_GetOutputLevel()
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+#ifdef HAL_COMP_MODULE_ENABLED
+
+#if defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined (STM32F098xx)
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup COMP COMP HAL Module Driver
+ * @brief COMP HAL module driver
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup COMP_Private_Constants COMP Private Constants
+ * @{
+ */
+/* CSR register reset value */
+#define COMP_CSR_RESET_VALUE ((uint32_t)0x00000000)
+/* CSR register masks */
+#define COMP_CSR_RESET_PARAMETERS_MASK ((uint32_t)0x00003FFF)
+#define COMP_CSR_UPDATE_PARAMETERS_MASK ((uint32_t)0x00003FFE)
+/* CSR COMPx non inverting input mask */
+#define COMP_CSR_COMPxNONINSEL_MASK ((uint16_t)COMP_CSR_COMP1SW1)
+/* CSR COMP2 shift */
+#define COMP_CSR_COMP1_SHIFT 0U
+#define COMP_CSR_COMP2_SHIFT 16U
+/**
+ * @}
+ */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup COMP_Exported_Functions COMP Exported Functions
+ * @{
+ */
+
+/** @defgroup COMP_Exported_Functions_Group1 Initialization/de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and Configuration functions #####
+ ===============================================================================
+ [..] This section provides functions to initialize and de-initialize comparators
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the COMP according to the specified
+ * parameters in the COMP_InitTypeDef and create the associated handle.
+ * @note If the selected comparator is locked, initialization can't be performed.
+ * To unlock the configuration, perform a system reset.
+ * @param hcomp: COMP handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_COMP_Init(COMP_HandleTypeDef *hcomp)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t regshift = COMP_CSR_COMP1_SHIFT;
+
+ /* Check the COMP handle allocation and lock status */
+ if((hcomp == NULL) || ((hcomp->State & COMP_STATE_BIT_LOCK) != RESET))
+ {
+ status = HAL_ERROR;
+ }
+ else
+ {
+ /* Check the parameter */
+ assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance));
+ assert_param(IS_COMP_INVERTINGINPUT(hcomp->Init.InvertingInput));
+ assert_param(IS_COMP_NONINVERTINGINPUT(hcomp->Init.NonInvertingInput));
+ assert_param(IS_COMP_OUTPUT(hcomp->Init.Output));
+ assert_param(IS_COMP_OUTPUTPOL(hcomp->Init.OutputPol));
+ assert_param(IS_COMP_HYSTERESIS(hcomp->Init.Hysteresis));
+ assert_param(IS_COMP_MODE(hcomp->Init.Mode));
+
+ if(hcomp->Init.NonInvertingInput == COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED)
+ {
+ assert_param(IS_COMP_DAC1SWITCH_INSTANCE(hcomp->Instance));
+ }
+
+ if(hcomp->Init.WindowMode != COMP_WINDOWMODE_DISABLED)
+ {
+ assert_param(IS_COMP_WINDOWMODE_INSTANCE(hcomp->Instance));
+ }
+
+ if(hcomp->State == HAL_COMP_STATE_RESET)
+ {
+ /* Init SYSCFG and the low level hardware to access comparators */
+ __SYSCFG_CLK_ENABLE();
+
+ HAL_COMP_MspInit(hcomp);
+ }
+
+ /* Set COMP parameters */
+ /* Set COMPxINSEL bits according to hcomp->Init.InvertingInput value */
+ /* Set COMPxOUTSEL bits according to hcomp->Init.Output value */
+ /* Set COMPxPOL bit according to hcomp->Init.OutputPol value */
+ /* Set COMPxHYST bits according to hcomp->Init.Hysteresis value */
+ /* Set COMPxMODE bits according to hcomp->Init.Mode value */
+ if(hcomp->Instance == COMP2)
+ {
+ regshift = COMP_CSR_COMP2_SHIFT;
+ }
+ MODIFY_REG(COMP->CSR,
+ (uint32_t)(COMP_CSR_COMPxINSEL | COMP_CSR_COMPxNONINSEL_MASK | \
+ COMP_CSR_COMPxOUTSEL | COMP_CSR_COMPxPOL | \
+ COMP_CSR_COMPxHYST | COMP_CSR_COMPxMODE) << regshift,
+ (hcomp->Init.InvertingInput | \
+ hcomp->Init.NonInvertingInput | \
+ hcomp->Init.Output | \
+ hcomp->Init.OutputPol | \
+ hcomp->Init.Hysteresis | \
+ hcomp->Init.Mode) << regshift);
+
+ if(hcomp->Init.WindowMode != COMP_WINDOWMODE_DISABLED)
+ {
+ COMP->CSR |= COMP_CSR_WNDWEN;
+ }
+
+ /* Initialize the COMP state*/
+ if(hcomp->State == HAL_COMP_STATE_RESET)
+ {
+ hcomp->State = HAL_COMP_STATE_READY;
+ }
+ }
+
+ return status;
+}
+
+/**
+ * @brief DeInitializes the COMP peripheral
+ * @note Deinitialization can't be performed if the COMP configuration is locked.
+ * To unlock the configuration, perform a system reset.
+ * @param hcomp: COMP handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_COMP_DeInit(COMP_HandleTypeDef *hcomp)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t regshift = COMP_CSR_COMP1_SHIFT;
+
+ /* Check the COMP handle allocation and lock status */
+ if((hcomp == NULL) || ((hcomp->State & COMP_STATE_BIT_LOCK) != RESET))
+ {
+ status = HAL_ERROR;
+ }
+ else
+ {
+ /* Check the parameter */
+ assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance));
+
+ /* Set COMP_CSR register to reset value for the corresponding COMP instance */
+ if(hcomp->Instance == COMP2)
+ {
+ regshift = COMP_CSR_COMP2_SHIFT;
+ }
+ MODIFY_REG(COMP->CSR,
+ COMP_CSR_RESET_PARAMETERS_MASK << regshift,
+ COMP_CSR_RESET_VALUE << regshift);
+
+ /* DeInit the low level hardware: SYSCFG, GPIO, CLOCK and NVIC */
+ HAL_COMP_MspDeInit(hcomp);
+
+ hcomp->State = HAL_COMP_STATE_RESET;
+ }
+
+ return status;
+}
+
+/**
+ * @brief Initializes the COMP MSP.
+ * @param hcomp: COMP handle
+ * @retval None
+ */
+__weak void HAL_COMP_MspInit(COMP_HandleTypeDef *hcomp)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_COMP_MspInit could be implenetd in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes COMP MSP.
+ * @param hcomp: COMP handle
+ * @retval None
+ */
+__weak void HAL_COMP_MspDeInit(COMP_HandleTypeDef *hcomp)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_COMP_MspDeInit could be implenetd in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup COMP_Exported_Functions_Group2 I/O operation functions
+ * @brief Data transfers functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the COMP data
+ transfers.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Start the comparator
+ * @param hcomp: COMP handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_COMP_Start(COMP_HandleTypeDef *hcomp)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t regshift = COMP_CSR_COMP1_SHIFT;
+
+ /* Check the COMP handle allocation and lock status */
+ if((hcomp == NULL) || ((hcomp->State & COMP_STATE_BIT_LOCK) != RESET))
+ {
+ status = HAL_ERROR;
+ }
+ else
+ {
+ /* Check the parameter */
+ assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance));
+
+ if(hcomp->State == HAL_COMP_STATE_READY)
+ {
+ /* Enable the selected comparator */
+ if(hcomp->Instance == COMP2)
+ {
+ regshift = COMP_CSR_COMP2_SHIFT;
+ }
+ SET_BIT(COMP->CSR, (uint32_t)COMP_CSR_COMPxEN << regshift);
+
+ hcomp->State = HAL_COMP_STATE_BUSY;
+ }
+ else
+ {
+ status = HAL_ERROR;
+ }
+ }
+
+ return status;
+}
+
+/**
+ * @brief Stop the comparator
+ * @param hcomp: COMP handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_COMP_Stop(COMP_HandleTypeDef *hcomp)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t regshift = COMP_CSR_COMP1_SHIFT;
+
+ /* Check the COMP handle allocation and lock status */
+ if((hcomp == NULL) || ((hcomp->State & COMP_STATE_BIT_LOCK) != RESET))
+ {
+ status = HAL_ERROR;
+ }
+ else
+ {
+ /* Check the parameter */
+ assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance));
+
+ if(hcomp->State == HAL_COMP_STATE_BUSY)
+ {
+ /* Disable the selected comparator */
+ if(hcomp->Instance == COMP2)
+ {
+ regshift = COMP_CSR_COMP2_SHIFT;
+ }
+ CLEAR_BIT(COMP->CSR, (uint32_t)COMP_CSR_COMPxEN << regshift);
+
+ hcomp->State = HAL_COMP_STATE_READY;
+ }
+ else
+ {
+ status = HAL_ERROR;
+ }
+ }
+
+ return status;
+}
+
+/**
+ * @brief Enables the interrupt and starts the comparator
+ * @param hcomp: COMP handle
+ * @retval HAL status.
+ */
+HAL_StatusTypeDef HAL_COMP_Start_IT(COMP_HandleTypeDef *hcomp)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t extiline = 0;
+
+ /* Check the parameter */
+ assert_param(IS_COMP_TRIGGERMODE(hcomp->Init.TriggerMode));
+
+ status = HAL_COMP_Start(hcomp);
+ if(status == HAL_OK)
+ {
+ /* Check the Exti Line output configuration */
+ extiline = __HAL_COMP_GET_EXTI_LINE(hcomp->Instance);
+ /* Configure the rising edge */
+ if((hcomp->Init.TriggerMode & COMP_TRIGGERMODE_IT_RISING) != RESET)
+ {
+ __HAL_COMP_EXTI_RISING_IT_ENABLE(extiline);
+ }
+ else
+ {
+ __HAL_COMP_EXTI_RISING_IT_DISABLE(extiline);
+ }
+ /* Configure the falling edge */
+ if((hcomp->Init.TriggerMode & COMP_TRIGGERMODE_IT_FALLING) != RESET)
+ {
+ __HAL_COMP_EXTI_FALLING_IT_ENABLE(extiline);
+ }
+ else
+ {
+ __HAL_COMP_EXTI_FALLING_IT_DISABLE(extiline);
+ }
+ /* Enable Exti interrupt mode */
+ __HAL_COMP_EXTI_ENABLE_IT(extiline);
+ /* Clear COMP Exti pending bit */
+ __HAL_COMP_EXTI_CLEAR_FLAG(extiline);
+ }
+
+ return status;
+}
+
+/**
+ * @brief Disable the interrupt and Stop the comparator
+ * @param hcomp: COMP handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_COMP_Stop_IT(COMP_HandleTypeDef *hcomp)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Disable the Exti Line interrupt mode */
+ __HAL_COMP_EXTI_DISABLE_IT(__HAL_COMP_GET_EXTI_LINE(hcomp->Instance));
+
+ status = HAL_COMP_Stop(hcomp);
+
+ return status;
+}
+
+/**
+ * @brief Comparator IRQ Handler
+ * @param hcomp: COMP handle
+ * @retval HAL status
+ */
+void HAL_COMP_IRQHandler(COMP_HandleTypeDef *hcomp)
+{
+ uint32_t extiline = __HAL_COMP_GET_EXTI_LINE(hcomp->Instance);
+
+ /* Check COMP Exti flag */
+ if(__HAL_COMP_EXTI_GET_FLAG(extiline) != RESET)
+ {
+ /* Clear COMP Exti pending bit */
+ __HAL_COMP_EXTI_CLEAR_FLAG(extiline);
+
+ /* COMP trigger user callback */
+ HAL_COMP_TriggerCallback(hcomp);
+ }
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup COMP_Exported_Functions_Group3 Peripheral Control functions
+ * @brief management functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the COMP data
+ transfers.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Lock the selected comparator configuration.
+ * @param hcomp: COMP handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_COMP_Lock(COMP_HandleTypeDef *hcomp)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t regshift = COMP_CSR_COMP1_SHIFT;
+
+ /* Check the COMP handle allocation and lock status */
+ if((hcomp == NULL) || ((hcomp->State & COMP_STATE_BIT_LOCK) != RESET))
+ {
+ status = HAL_ERROR;
+ }
+ else
+ {
+ /* Check the parameter */
+ assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance));
+
+ /* Set lock flag */
+ hcomp->State |= COMP_STATE_BIT_LOCK;
+
+ /* Set the lock bit corresponding to selected comparator */
+ if(hcomp->Instance == COMP2)
+ {
+ regshift = COMP_CSR_COMP2_SHIFT;
+ }
+ SET_BIT(COMP->CSR, (uint32_t)COMP_CSR_COMPxLOCK << regshift);
+ }
+
+ return status;
+}
+
+/**
+ * @brief Return the output level (high or low) of the selected comparator.
+ * The output level depends on the selected polarity.
+ * If the polarity is not inverted:
+ * - Comparator output is low when the non-inverting input is at a lower
+ * voltage than the inverting input
+ * - Comparator output is high when the non-inverting input is at a higher
+ * voltage than the inverting input
+ * If the polarity is inverted:
+ * - Comparator output is high when the non-inverting input is at a lower
+ * voltage than the inverting input
+ * - Comparator output is low when the non-inverting input is at a higher
+ * voltage than the inverting input
+ * @param hcomp: COMP handle
+ * @retval Returns the selected comparator output level: COMP_OUTPUTLEVEL_LOW or COMP_OUTPUTLEVEL_HIGH.
+ *
+ */
+uint32_t HAL_COMP_GetOutputLevel(COMP_HandleTypeDef *hcomp)
+{
+ uint32_t level=0;
+ uint32_t regshift = COMP_CSR_COMP1_SHIFT;
+
+ /* Check the parameter */
+ assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance));
+
+ if(hcomp->Instance == COMP2)
+ {
+ regshift = COMP_CSR_COMP2_SHIFT;
+ }
+ level = READ_BIT(COMP->CSR, (uint32_t)COMP_CSR_COMPxOUT << regshift);
+
+ if(level != 0)
+ {
+ return(COMP_OUTPUTLEVEL_HIGH);
+ }
+ return(COMP_OUTPUTLEVEL_LOW);
+}
+
+/**
+ * @brief Comparator callback.
+ * @param hcomp: COMP handle
+ * @retval None
+ */
+__weak void HAL_COMP_TriggerCallback(COMP_HandleTypeDef *hcomp)
+{
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_COMP_TriggerCallback should be implemented in the user file
+ */
+}
+
+
+/**
+ * @}
+ */
+
+/** @defgroup COMP_Exported_Functions_Group4 Peripheral State functions
+ * @brief Peripheral State functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral State functions #####
+ ===============================================================================
+ [..]
+ This subsection permit to get in run-time the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the COMP state
+ * @param hcomp : COMP handle
+ * @retval HAL state
+ */
+uint32_t HAL_COMP_GetState(COMP_HandleTypeDef *hcomp)
+{
+ /* Check the COMP handle allocation */
+ if(hcomp == NULL)
+ {
+ return HAL_COMP_STATE_RESET;
+ }
+
+ /* Check the parameter */
+ assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance));
+
+ return hcomp->State;
+}
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || defined (STM32F098xx) */
+
+#endif /* HAL_COMP_MODULE_ENABLED */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/src/stm32f0xx_hal_cortex.c b/f0/src/stm32f0xx_hal_cortex.c
new file mode 100755
index 0000000000000000000000000000000000000000..0c1c943c31a59e71fc6e17376ea54bef681bae5b
--- /dev/null
+++ b/f0/src/stm32f0xx_hal_cortex.c
@@ -0,0 +1,342 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_cortex.c
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief CORTEX HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the CORTEX:
+ * + Initialization and de-initialization functions
+ * + Peripheral Control functions
+ *
+ * @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+
+ [..]
+ *** How to configure Interrupts using CORTEX HAL driver ***
+ ===========================================================
+ [..]
+ This section provides functions allowing to configure the NVIC interrupts (IRQ).
+ The Cortex-M0 exceptions are managed by CMSIS functions.
+ (#) Enable and Configure the priority of the selected IRQ Channels.
+ The priority can be 0..3.
+
+ -@- Lower priority values gives higher priority.
+ -@- Priority Order:
+ (#@) Lowest priority.
+ (#@) Lowest hardware priority (IRQn position).
+
+ (#) Configure the priority of the selected IRQ Channels using HAL_NVIC_SetPriority()
+
+ (#) Enable the selected IRQ Channels using HAL_NVIC_EnableIRQ()
+
+
+ [..]
+ *** How to configure Systick using CORTEX HAL driver ***
+ ========================================================
+ [..]
+ Setup SysTick Timer for time base
+
+ (+) The HAL_SYSTICK_Config()function calls the SysTick_Config() function which
+ is a CMSIS function that:
+ (++) Configures the SysTick Reload register with value passed as function parameter.
+ (++) Configures the SysTick IRQ priority to the lowest value (0x03).
+ (++) Resets the SysTick Counter register.
+ (++) Configures the SysTick Counter clock source to be Core Clock Source (HCLK).
+ (++) Enables the SysTick Interrupt.
+ (++) Starts the SysTick Counter.
+
+ (+) You can change the SysTick Clock source to be HCLK_Div8 by calling the macro
+ __HAL_CORTEX_SYSTICKCLK_CONFIG(SYSTICK_CLKSOURCE_HCLK_DIV8) just after the
+ HAL_SYSTICK_Config() function call. The __HAL_CORTEX_SYSTICKCLK_CONFIG() macro is defined
+ inside the stm32f0xx_hal_cortex.h file.
+
+ (+) You can change the SysTick IRQ priority by calling the
+ HAL_NVIC_SetPriority(SysTick_IRQn,...) function just after the HAL_SYSTICK_Config() function
+ call. The HAL_NVIC_SetPriority() call the NVIC_SetPriority() function which is a CMSIS function.
+
+ (+) To adjust the SysTick time base, use the following formula:
+
+ Reload Value = SysTick Counter Clock (Hz) x Desired Time base (s)
+ (++) Reload Value is the parameter to be passed for HAL_SYSTICK_Config() function
+ (++) Reload Value should not exceed 0xFFFFFF
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup CORTEX CORTEX HAL module driver
+ * @brief CORTEX CORTEX HAL module driver
+ * @{
+ */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup CORTEX_Exported_Functions CORTEX Exported Functions
+ * @{
+ */
+
+
+/** @defgroup CORTEX_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Initialization and de-initialization functions #####
+ ==============================================================================
+ [..]
+ This section provides the CORTEX HAL driver functions allowing to configure Interrupts
+ Systick functionalities
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Sets the priority of an interrupt.
+ * @param IRQn: External interrupt number .
+ * This parameter can be an enumerator of IRQn_Type enumeration
+ * (For the complete STM32 Devices IRQ Channels list, please refer to stm32l0xx.h file)
+ * @param PreemptPriority: The pre-emption priority for the IRQn channel.
+ * This parameter can be a value between 0 and 3.
+ * A lower priority value indicates a higher priority
+ * @param SubPriority: The subpriority level for the IRQ channel.
+ * with stm32f0xx devices, this parameter is a dummy value and it is ignored, because
+ * no subpriority supported in Cortex M0 based products.
+ * @retval None
+ */
+void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ /* Check the parameters */
+ assert_param(IS_NVIC_PREEMPTION_PRIORITY(PreemptPriority));
+ NVIC_SetPriority(IRQn,PreemptPriority);
+}
+
+/**
+ * @brief Enables a device specific interrupt in the NVIC interrupt controller.
+ * @note To configure interrupts priority correctly, the NVIC_PriorityGroupConfig()
+ * function should be called before.
+ * @param IRQn External interrupt number
+ * This parameter can be an enumerator of IRQn_Type enumeration
+ * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f0xxxx.h))
+ * @retval None
+ */
+void HAL_NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ /* Enable interrupt */
+ NVIC_EnableIRQ(IRQn);
+}
+
+/**
+ * @brief Disables a device specific interrupt in the NVIC interrupt controller.
+ * @param IRQn External interrupt number
+ * This parameter can be an enumerator of IRQn_Type enumeration
+ * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f0xxxx.h))
+ * @retval None
+ */
+void HAL_NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ /* Disable interrupt */
+ NVIC_DisableIRQ(IRQn);
+}
+
+/**
+ * @brief Initiates a system reset request to reset the MCU.
+ * @retval None
+ */
+void HAL_NVIC_SystemReset(void)
+{
+ /* System Reset */
+ NVIC_SystemReset();
+}
+
+/**
+ * @brief Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ * Counter is in free running mode to generate periodic interrupts.
+ * @param TicksNumb: Specifies the ticks Number of ticks between two interrupts.
+ * @retval status: - 0 Function succeeded.
+ * - 1 Function failed.
+ */
+uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb)
+{
+ return SysTick_Config(TicksNumb);
+}
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_Exported_Functions_Group2 Peripheral Control functions
+ * @brief Cortex control functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral Control functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the CORTEX
+ (NVIC, SYSTICK) functionalities.
+
+
+@endverbatim
+ * @{
+ */
+
+
+/**
+ * @brief Gets the priority of an interrupt.
+ * @param IRQn: External interrupt number
+ * This parameter can be an enumerator of IRQn_Type enumeration
+ * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f0xxxx.h))
+ * @retval None
+ */
+uint32_t HAL_NVIC_GetPriority(IRQn_Type IRQn)
+{
+ /* Get priority for Cortex-M system or device specific interrupts */
+ return NVIC_GetPriority(IRQn);
+}
+
+/**
+ * @brief Sets Pending bit of an external interrupt.
+ * @param IRQn External interrupt number
+ * This parameter can be an enumerator of IRQn_Type enumeration
+ * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f0xxxx.h))
+ * @retval None
+ */
+void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ /* Set interrupt pending */
+ NVIC_SetPendingIRQ(IRQn);
+}
+
+/**
+ * @brief Gets Pending Interrupt (reads the pending register in the NVIC
+ * and returns the pending bit for the specified interrupt).
+ * @param IRQn External interrupt number
+ * This parameter can be an enumerator of IRQn_Type enumeration
+ * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f0xxxx.h))
+ * @retval status: - 0 Interrupt status is not pending.
+ * - 1 Interrupt status is pending.
+ */
+uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ /* Return 1 if pending else 0 */
+ return NVIC_GetPendingIRQ(IRQn);
+}
+
+/**
+ * @brief Clears the pending bit of an external interrupt.
+ * @param IRQn External interrupt number
+ * This parameter can be an enumerator of IRQn_Type enumeration
+ * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f0xxxx.h))
+ * @retval None
+ */
+void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ /* Clear pending interrupt */
+ NVIC_ClearPendingIRQ(IRQn);
+}
+
+/**
+ * @brief Configures the SysTick clock source.
+ * @param CLKSource: specifies the SysTick clock source.
+ * This parameter can be one of the following values:
+ * @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source.
+ * @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source.
+ * @retval None
+ */
+void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource)
+{
+ /* Check the parameters */
+ assert_param(IS_SYSTICK_CLK_SOURCE(CLKSource));
+ if (CLKSource == SYSTICK_CLKSOURCE_HCLK)
+ {
+ SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK;
+ }
+ else
+ {
+ SysTick->CTRL &= ~SYSTICK_CLKSOURCE_HCLK;
+ }
+}
+
+/**
+ * @brief This function handles SYSTICK interrupt request.
+ * @retval None
+ */
+void HAL_SYSTICK_IRQHandler(void)
+{
+ HAL_SYSTICK_Callback();
+}
+
+/**
+ * @brief SYSTICK callback.
+ * @retval None
+ */
+__weak void HAL_SYSTICK_Callback(void)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SYSTICK_Callback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/src/stm32f0xx_hal_crc.c b/f0/src/stm32f0xx_hal_crc.c
new file mode 100755
index 0000000000000000000000000000000000000000..2acdea5846ba62e8855f562785f99844ffefb6ac
--- /dev/null
+++ b/f0/src/stm32f0xx_hal_crc.c
@@ -0,0 +1,506 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_crc.c
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief CRC HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Cyclic Redundancy Check (CRC) peripheral:
+ * + Initialization and de-initialization functions
+ * + Peripheral Control functions
+ * + Peripheral State functions
+ *
+ @verbatim
+ ===============================================================================
+ ##### How to use this driver #####
+ ===============================================================================
+ [..]
+ (#) Enable CRC AHB clock using __CRC_CLK_ENABLE();
+ (#) Initialize CRC calculator
+ (++)specify generating polynomial (IP default or non-default one)
+ (++)specify initialization value (IP default or non-default one)
+ (++)specify input data format
+ (++)specify input or output data inversion mode if any
+ (#) Use HAL_CRC_Accumulate() function to compute the CRC value of the
+ input data buffer starting with the previously computed CRC as
+ initialization value
+ (#) Use HAL_CRC_Calculate() function to compute the CRC value of the
+ input data buffer starting with the defined initialization value
+ (default or non-default) to initiate CRC calculation
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup CRC CRC HAL module driver
+ * @brief CRC HAL module driver.
+ * @{
+ */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup CRC_Private_Functions CRC Private Functions
+ * @{
+ */
+static uint32_t CRC_Handle_8(CRC_HandleTypeDef *hcrc, uint8_t pBuffer[], uint32_t BufferLength);
+static uint32_t CRC_Handle_16(CRC_HandleTypeDef *hcrc, uint16_t pBuffer[], uint32_t BufferLength);
+/**
+ * @}
+ */
+
+/* Exported functions ---------------------------------------------------------*/
+/** @defgroup CRC_Exported_Functions CRC Exported Functions
+ * @{
+ */
+
+/** @defgroup CRC_Exported_Functions_Group1 Initialization/de-initialization functions
+ * @brief Initialization and Configuration functions.
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and Configuration functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Initialize the CRC according to the specified parameters
+ in the CRC_InitTypeDef and create the associated handle
+ (+) DeInitialize the CRC peripheral
+ (+) Initialize the CRC MSP
+ (+) DeInitialize CRC MSP
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the CRC according to the specified
+ * parameters in the CRC_InitTypeDef and creates the associated handle.
+ * @param hcrc: CRC handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRC_Init(CRC_HandleTypeDef *hcrc)
+{
+ /* Check the CRC handle allocation */
+ if(hcrc == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_CRC_ALL_INSTANCE(hcrc->Instance));
+
+ if(hcrc->State == HAL_CRC_STATE_RESET)
+ {
+ /* Init the low level hardware */
+ HAL_CRC_MspInit(hcrc);
+ }
+
+ hcrc->State = HAL_CRC_STATE_BUSY;
+
+ /* Extended initialization: if programmable polynomial feature is
+ applicable to device, set default or non-default generating
+ polynomial according to hcrc->Init parameters.
+ If feature is non-applicable to device in use, HAL_CRCEx_Init straight
+ away reports HAL_OK. */
+ if (HAL_CRCEx_Init(hcrc) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ /* check whether or not non-default CRC initial value has been
+ * picked up by user */
+ assert_param(IS_DEFAULT_INIT_VALUE(hcrc->Init.DefaultInitValueUse));
+ if (hcrc->Init.DefaultInitValueUse == DEFAULT_INIT_VALUE_ENABLE)
+ {
+ WRITE_REG(hcrc->Instance->INIT, DEFAULT_CRC_INITVALUE);
+ }
+ else
+ {
+ WRITE_REG(hcrc->Instance->INIT, hcrc->Init.InitValue);
+ }
+
+
+ /* set input data inversion mode */
+ assert_param(IS_CRC_INPUTDATA_INVERSION_MODE(hcrc->Init.InputDataInversionMode));
+ MODIFY_REG(hcrc->Instance->CR, CRC_CR_REV_IN, hcrc->Init.InputDataInversionMode);
+
+ /* set output data inversion mode */
+ assert_param(IS_CRC_OUTPUTDATA_INVERSION_MODE(hcrc->Init.OutputDataInversionMode));
+ MODIFY_REG(hcrc->Instance->CR, CRC_CR_REV_OUT, hcrc->Init.OutputDataInversionMode);
+
+ /* makes sure the input data format (bytes, halfwords or words stream)
+ * is properly specified by user */
+ assert_param(IS_CRC_INPUTDATA_FORMAT(hcrc->InputDataFormat));
+
+ /* Change CRC peripheral state */
+ hcrc->State = HAL_CRC_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the CRC peripheral.
+ * @param hcrc: CRC handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRC_DeInit(CRC_HandleTypeDef *hcrc)
+{
+ /* Check the CRC handle allocation */
+ if(hcrc == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_CRC_ALL_INSTANCE(hcrc->Instance));
+
+ /* Check the CRC peripheral state */
+ if(hcrc->State == HAL_CRC_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Change CRC peripheral state */
+ hcrc->State = HAL_CRC_STATE_BUSY;
+
+ /* DeInit the low level hardware */
+ HAL_CRC_MspDeInit(hcrc);
+
+ /* Change CRC peripheral state */
+ hcrc->State = HAL_CRC_STATE_RESET;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hcrc);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRC MSP.
+ * @param hcrc: CRC handle
+ * @retval None
+ */
+__weak void HAL_CRC_MspInit(CRC_HandleTypeDef *hcrc)
+{
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_CRC_MspInit can be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes the CRC MSP.
+ * @param hcrc: CRC handle
+ * @retval None
+ */
+__weak void HAL_CRC_MspDeInit(CRC_HandleTypeDef *hcrc)
+{
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_CRC_MspDeInit can be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Exported_Functions_Group2 Peripheral Control functions
+ * @brief management functions.
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Compute the 7, 8, 16 or 32-bit CRC value of an 8, 16 or 32-bit data buffer
+ using combination of the previous CRC value and the new one.
+
+ or
+
+ (+) Compute the 7, 8, 16 or 32-bit CRC value of an 8, 16 or 32-bit data buffer
+ independently of the previous CRC value.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Compute the 7, 8, 16 or 32-bit CRC value of an 8, 16 or 32-bit data buffer
+ * starting with the previously computed CRC as initialization value.
+ * @param hcrc: CRC handle
+ * @param pBuffer: pointer to the input data buffer, exact input data format is
+ * provided by hcrc->InputDataFormat.
+ * @param BufferLength: input data buffer length
+ * @retval uint32_t CRC (returned value LSBs for CRC shorter than 32 bits)
+ */
+uint32_t HAL_CRC_Accumulate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength)
+{
+ uint32_t index = 0; /* CRC input data buffer index */
+ uint32_t temp = 0; /* CRC output (read from hcrc->Instance->DR register) */
+
+ /* Process locked */
+ __HAL_LOCK(hcrc);
+
+ /* Change CRC peripheral state */
+ hcrc->State = HAL_CRC_STATE_BUSY;
+
+ switch (hcrc->InputDataFormat)
+ {
+ case CRC_INPUTDATA_FORMAT_WORDS:
+ /* Enter Data to the CRC calculator */
+ for(index = 0; index < BufferLength; index++)
+ {
+ hcrc->Instance->DR = pBuffer[index];
+ }
+ temp = hcrc->Instance->DR;
+ break;
+
+ case CRC_INPUTDATA_FORMAT_BYTES:
+ temp = CRC_Handle_8(hcrc, (uint8_t*)pBuffer, BufferLength);
+ break;
+
+ case CRC_INPUTDATA_FORMAT_HALFWORDS:
+ temp = CRC_Handle_16(hcrc, (uint16_t*)pBuffer, BufferLength);
+ break;
+
+ default:
+ break;
+ }
+
+ /* Change CRC peripheral state */
+ hcrc->State = HAL_CRC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hcrc);
+
+ /* Return the CRC computed value */
+ return temp;
+}
+
+
+/**
+ * @brief Compute the 7, 8, 16 or 32-bit CRC value of an 8, 16 or 32-bit data buffer
+ * starting with hcrc->Instance->INIT as initialization value.
+ * @param hcrc: CRC handle
+ * @param pBuffer: pointer to the input data buffer, exact input data format is
+ * provided by hcrc->InputDataFormat.
+ * @param BufferLength: input data buffer length
+ * @retval uint32_t CRC (returned value LSBs for CRC shorter than 32 bits)
+ */
+uint32_t HAL_CRC_Calculate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength)
+{
+ uint32_t index = 0; /* CRC input data buffer index */
+ uint32_t temp = 0; /* CRC output (read from hcrc->Instance->DR register) */
+
+ /* Process locked */
+ __HAL_LOCK(hcrc);
+
+ /* Change CRC peripheral state */
+ hcrc->State = HAL_CRC_STATE_BUSY;
+
+ /* Reset CRC Calculation Unit (hcrc->Instance->INIT is
+ * written in hcrc->Instance->DR) */
+ __HAL_CRC_DR_RESET(hcrc);
+
+ switch (hcrc->InputDataFormat)
+ {
+ case CRC_INPUTDATA_FORMAT_WORDS:
+ /* Enter 32-bit input data to the CRC calculator */
+ for(index = 0; index < BufferLength; index++)
+ {
+ hcrc->Instance->DR = pBuffer[index];
+ }
+ temp = hcrc->Instance->DR;
+ break;
+
+ case CRC_INPUTDATA_FORMAT_BYTES:
+ /* Specific 8-bit input data handling */
+ temp = CRC_Handle_8(hcrc, (uint8_t*)pBuffer, BufferLength);
+ break;
+
+ case CRC_INPUTDATA_FORMAT_HALFWORDS:
+ /* Specific 16-bit input data handling */
+ temp = CRC_Handle_16(hcrc, (uint16_t*)pBuffer, BufferLength);
+ break;
+
+ default:
+ break;
+ }
+
+ /* Change CRC peripheral state */
+ hcrc->State = HAL_CRC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hcrc);
+
+ /* Return the CRC computed value */
+ return temp;
+}
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Exported_Functions_Group3 Peripheral State functions
+ * @brief Peripheral State functions.
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral State functions #####
+ ===============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Returns the CRC state.
+ * @param hcrc: CRC handle
+ * @retval HAL state
+ */
+HAL_CRC_StateTypeDef HAL_CRC_GetState(CRC_HandleTypeDef *hcrc)
+{
+ return hcrc->State;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup CRC_Private_Functions CRC Private Functions
+ * @{
+ */
+/**
+ * @brief Enter 8-bit input data to the CRC calculator.
+ * Specific data handling to optimize processing time.
+ * @param hcrc: CRC handle
+ * @param pBuffer: pointer to the input data buffer
+ * @param BufferLength: input data buffer length
+ * @retval uint32_t CRC (returned value LSBs for CRC shorter than 32 bits)
+ */
+static uint32_t CRC_Handle_8(CRC_HandleTypeDef *hcrc, uint8_t pBuffer[], uint32_t BufferLength)
+{
+ uint32_t i = 0; /* input data buffer index */
+
+ /* Processing time optimization: 4 bytes are entered in a row with a single word write,
+ * last bytes must be carefully fed to the CRC calculator to ensure a correct type
+ * handling by the IP */
+ for(i = 0; i < (BufferLength/4); i++)
+ {
+ hcrc->Instance->DR = ((uint32_t)pBuffer[4*i]<<24) | ((uint32_t)pBuffer[4*i+1]<<16) | ((uint32_t)pBuffer[4*i+2]<<8) | (uint32_t)pBuffer[4*i+3];
+ }
+ /* last bytes specific handling */
+ if ((BufferLength%4) != 0)
+ {
+ if (BufferLength%4 == 1)
+ {
+ *(uint8_t*) (&hcrc->Instance->DR) = pBuffer[4*i];
+ }
+ if (BufferLength%4 == 2)
+ {
+ *(uint16_t*) (&hcrc->Instance->DR) = ((uint16_t)pBuffer[4*i]<<8) | (uint16_t)pBuffer[4*i+1];
+ }
+ if (BufferLength%4 == 3)
+ {
+ *(uint16_t*) (&hcrc->Instance->DR) = ((uint16_t)pBuffer[4*i]<<8) | (uint16_t)pBuffer[4*i+1];
+ *(uint8_t*) (&hcrc->Instance->DR) = pBuffer[4*i+2];
+ }
+ }
+
+ /* Return the CRC computed value */
+ return hcrc->Instance->DR;
+}
+
+
+
+/**
+ * @brief Enter 16-bit input data to the CRC calculator.
+ * Specific data handling to optimize processing time.
+ * @param hcrc: CRC handle
+ * @param pBuffer: pointer to the input data buffer
+ * @param BufferLength: input data buffer length
+ * @retval uint32_t CRC (returned value LSBs for CRC shorter than 32 bits)
+ */
+static uint32_t CRC_Handle_16(CRC_HandleTypeDef *hcrc, uint16_t pBuffer[], uint32_t BufferLength)
+{
+ uint32_t i = 0; /* input data buffer index */
+
+ /* Processing time optimization: 2 HalfWords are entered in a row with a single word write,
+ * in case of odd length, last HalfWord must be carefully fed to the CRC calculator to ensure
+ * a correct type handling by the IP */
+ for(i = 0; i < (BufferLength/2); i++)
+ {
+ hcrc->Instance->DR = (pBuffer[2*i]<<16) | pBuffer[2*i+1];
+ }
+ if ((BufferLength%2) != 0)
+ {
+ *(uint16_t*) (&hcrc->Instance->DR) = pBuffer[2*i];
+ }
+
+ /* Return the CRC computed value */
+ return hcrc->Instance->DR;
+}
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_CRC_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/src/stm32f0xx_hal_crc_ex.c b/f0/src/stm32f0xx_hal_crc_ex.c
new file mode 100755
index 0000000000000000000000000000000000000000..568b5cd67ff959f651f26ae82c25cbc59ceb27a1
--- /dev/null
+++ b/f0/src/stm32f0xx_hal_crc_ex.c
@@ -0,0 +1,275 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_crc_ex.c
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief Extended CRC HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the CRC peripheral:
+ * + Extended initialization functions
+ *
+ @verbatim
+================================================================================
+ ##### Product specific features #####
+================================================================================
+
+ ##### How to use this driver #####
+================================================================================
+ [..]
+ (+) Extended initialization
+ (+) Set or not user-defined generating
+ polynomial other than default one
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup CRCEx CRCEx Extended HAL Module Driver
+ * @brief CRC Extended HAL module driver
+ * @{
+ */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup CRCEx_Exported_Functions CRCEx Exported Functions
+ * @{
+ */
+
+/** @defgroup CRCEx_Exported_Functions_Group1 Extended Initialization/de-initialization functions
+ * @brief Extended Initialization and Configuration functions.
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and Configuration functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Initialize the CRC generating polynomial: if programmable polynomial
+ feature is applicable to device, set default or non-default generating
+ polynomial according to hcrc->Init.DefaultPolynomialUse parameter.
+ If feature is non-applicable to device in use, HAL_CRCEx_Init straight
+ away reports HAL_OK.
+ (+) Set the generating polynomial
+
+@endverbatim
+ * @{
+ */
+
+
+/**
+ * @brief Extended initialization to set generating polynomial
+ * @param hcrc: CRC handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRCEx_Init(CRC_HandleTypeDef *hcrc)
+{
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined (STM32F098xx)
+ /* check whether or not non-default generating polynomial has been
+ * picked up by user */
+ assert_param(IS_DEFAULT_POLYNOMIAL(hcrc->Init.DefaultPolynomialUse));
+ if (hcrc->Init.DefaultPolynomialUse == DEFAULT_POLYNOMIAL_ENABLE)
+ {
+ /* initialize IP with default generating polynomial */
+ WRITE_REG(hcrc->Instance->POL, DEFAULT_CRC32_POLY);
+ MODIFY_REG(hcrc->Instance->CR, CRC_CR_POLYSIZE, CRC_POLYLENGTH_32B);
+ }
+ else
+ {
+ /* initialize CRC IP with generating polynomial defined by user */
+ if (HAL_CRCEx_Polynomial_Set(hcrc, hcrc->Init.GeneratingPolynomial, hcrc->Init.CRCLength) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+ }
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined (STM32F098xx) */
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Set the Reverse Input data mode.
+ * @param hcrc: CRC handle
+ * @param InputReverseMode: Input Data inversion mode
+ * This parameter can be one of the following values:
+ * @arg CRC_INPUTDATA_NOINVERSION: no change in bit order (default value)
+ * @arg CRC_INPUTDATA_INVERSION_BYTE: Byte-wise bit reversal
+ * @arg CRC_INPUTDATA_INVERSION_HALFWORD: HalfWord-wise bit reversal
+ * @arg CRC_INPUTDATA_INVERSION_WORD: Word-wise bit reversal
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRCEx_Input_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t InputReverseMode)
+{
+ /* Check the parameters */
+ assert_param(IS_CRC_INPUTDATA_INVERSION_MODE(InputReverseMode));
+
+ /* Change CRC peripheral state */
+ hcrc->State = HAL_CRC_STATE_BUSY;
+
+ /* set input data inversion mode */
+ MODIFY_REG(hcrc->Instance->CR, CRC_CR_REV_IN, InputReverseMode);
+ /* Change CRC peripheral state */
+ hcrc->State = HAL_CRC_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Set the Reverse Output data mode.
+ * @param hcrc: CRC handle
+ * @param OutputReverseMode: Output Data inversion mode
+ * This parameter can be one of the following values:
+ * @arg CRC_OUTPUTDATA_INVERSION_DISABLED: no CRC inversion (default value)
+ * @arg CRC_OUTPUTDATA_INVERSION_ENABLED: bit-level inversion (e.g for a 8-bit CRC: 0xB5 becomes 0xAD)
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRCEx_Output_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t OutputReverseMode)
+{
+ /* Check the parameters */
+ assert_param(IS_CRC_OUTPUTDATA_INVERSION_MODE(OutputReverseMode));
+
+ /* Change CRC peripheral state */
+ hcrc->State = HAL_CRC_STATE_BUSY;
+
+ /* set output data inversion mode */
+ MODIFY_REG(hcrc->Instance->CR, CRC_CR_REV_OUT, OutputReverseMode);
+
+ /* Change CRC peripheral state */
+ hcrc->State = HAL_CRC_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+#if defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F091xC) || defined (STM32F098xx)
+/**
+ * @brief Initializes the CRC polynomial if different from default one.
+ * @param hcrc: CRC handle
+ * @param Pol: CRC generating polynomial (7, 8, 16 or 32-bit long)
+ * This parameter is written in normal representation, e.g.
+ * for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 is written 0x65
+ * for a polynomial of degree 16, X^16 + X^12 + X^5 + 1 is written 0x1021
+ * @param PolyLength: CRC polynomial length
+ * This parameter can be one of the following values:
+ * @arg CRC_POLYLENGTH_7B: 7-bit long CRC (generating polynomial of degree 7)
+ * @arg CRC_POLYLENGTH_8B: 8-bit long CRC (generating polynomial of degree 8)
+ * @arg CRC_POLYLENGTH_16B: 16-bit long CRC (generating polynomial of degree 16)
+ * @arg CRC_POLYLENGTH_32B: 32-bit long CRC (generating polynomial of degree 32)
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRCEx_Polynomial_Set(CRC_HandleTypeDef *hcrc, uint32_t Pol, uint32_t PolyLength)
+{
+ uint32_t msb = 31; /* polynomial degree is 32 at most, so msb is initialized to max value */
+
+ /* Check the parameters */
+ assert_param(IS_CRC_POL_LENGTH(PolyLength));
+
+ /* check polynomial definition vs polynomial size:
+ * polynomial length must be aligned with polynomial
+ * definition. HAL_ERROR is reported if Pol degree is
+ * larger than that indicated by PolyLength.
+ * Look for MSB position: msb will contain the degree of
+ * the second to the largest polynomial member. E.g., for
+ * X^7 + X^6 + X^5 + X^2 + 1, msb = 6. */
+ while (((Pol & (1U << msb)) == 0) && (msb-- > 0))
+ {}
+
+ switch (PolyLength)
+ {
+ case CRC_POLYLENGTH_7B:
+ if (msb >= HAL_CRC_LENGTH_7B)
+ {
+ return HAL_ERROR;
+ }
+ break;
+ case CRC_POLYLENGTH_8B:
+ if (msb >= HAL_CRC_LENGTH_8B)
+ {
+ return HAL_ERROR;
+ }
+ break;
+ case CRC_POLYLENGTH_16B:
+ if (msb >= HAL_CRC_LENGTH_16B)
+ {
+ return HAL_ERROR;
+ }
+ break;
+ case CRC_POLYLENGTH_32B:
+ /* no polynomial definition vs. polynomial length issue possible */
+ break;
+ default:
+ break;
+ }
+
+ /* set generating polynomial */
+ WRITE_REG(hcrc->Instance->POL, Pol);
+
+ /* set generating polynomial size */
+ MODIFY_REG(hcrc->Instance->CR, CRC_CR_POLYSIZE, PolyLength);
+
+ /* Return function status */
+ return HAL_OK;
+}
+#endif /* #if defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F091xC) || defined (STM32F098xx) */
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+
+#endif /* HAL_CRC_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/src/stm32f0xx_hal_dac.c b/f0/src/stm32f0xx_hal_dac.c
new file mode 100755
index 0000000000000000000000000000000000000000..e6b4d1d8fdadef6e7e13c888a7b497933a88f5ff
--- /dev/null
+++ b/f0/src/stm32f0xx_hal_dac.c
@@ -0,0 +1,693 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_dac.c
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief DAC HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Digital to Analog Converter (DAC) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral Control functions
+ * + Peripheral State and Errors functions
+ *
+ *
+ @verbatim
+ ==============================================================================
+ ##### DAC Peripheral features #####
+ ==============================================================================
+ [..]
+ *** DAC Channels ***
+ ====================
+ [..]
+ STM32F0 devices integrates no, one or two 12-bit Digital Analog Converters.
+ STM32F05x devices have one converter (channel1)
+ STM32F07x & STM32F09x devices have two converters (i.e. channel1 & channel2)
+
+ When 2 converters are present (i.e. channel1 & channel2) they
+ can be used independently or simultaneously (dual mode):
+ (#) DAC channel1 with DAC_OUT1 (PA4) as output
+ (#) DAC channel2 with DAC_OUT2 (PA5) as output
+
+ *** DAC Triggers ***
+ ====================
+ [..]
+ Digital to Analog conversion can be non-triggered using DAC_Trigger_None
+ and DAC_OUT1/DAC_OUT2 is available once writing to DHRx register.
+ [..]
+ Digital to Analog conversion can be triggered by:
+ (#) External event: EXTI Line 9 (any GPIOx_Pin9) using DAC_Trigger_Ext_IT9.
+ The used pin (GPIOx_Pin9) must be configured in input mode.
+
+ (#) Timers TRGO: TIM2, TIM3, TIM6, and TIM15
+ (DAC_Trigger_T2_TRGO, DAC_Trigger_T3_TRGO...)
+
+ (#) Software using DAC_Trigger_Software
+
+ *** DAC Buffer mode feature ***
+ ===============================
+ [..]
+ Each DAC channel integrates an output buffer that can be used to
+ reduce the output impedance, and to drive external loads directly
+ without having to add an external operational amplifier.
+ To enable, the output buffer use
+ sConfig.DAC_OutputBuffer = DAC_OutputBuffer_Enable;
+ [..]
+ (@) Refer to the device datasheet for more details about output
+ impedance value with and without output buffer.
+
+ *** DAC wave generation feature ***
+ ===================================
+ [..]
+ Both DAC channels can be used to generate
+ (#) Noise wave
+ (#) Triangle wave
+
+ *** DAC data format ***
+ =======================
+ [..]
+ The DAC data format can be:
+ (#) 8-bit right alignment using DAC_ALIGN_8B_R
+ (#) 12-bit left alignment using DAC_ALIGN_12B_L
+ (#) 12-bit right alignment using DAC_ALIGN_12B_R
+
+ *** DAC data value to voltage correspondence ***
+ ================================================
+ [..]
+ The analog output voltage on each DAC channel pin is determined
+ by the following equation:
+ DAC_OUTx = VREF+ * DOR / 4095
+ with DOR is the Data Output Register
+ VEF+ is the input voltage reference (refer to the device datasheet)
+ e.g. To set DAC_OUT1 to 0.7V, use
+ Assuming that VREF+ = 3.3V, DAC_OUT1 = (3.3 * 868) / 4095 = 0.7V
+
+ *** DMA requests ***
+ =====================
+ [..]
+ A DMA1 request can be generated when an external trigger (but not
+ a software trigger) occurs if DMA1 requests are enabled using
+ HAL_DAC_Start_DMA()
+ [..]
+ DMA1 requests are mapped as following:
+ (#) DAC channel1 : mapped on DMA1 channel3 which must be
+ already configured
+ (#) DAC channel2 : mapped on DMA1 channel4 which must be
+ already configured
+
+ -@- For Dual mode and specific signal (Triangle and noise) generation please
+ refer to Extension Features Driver description
+ STM32F0 devices with one channel (one converting capability) does not
+ support Dual mode and specific signal (Triangle and noise) generation.
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (+) DAC APB clock must be enabled to get write access to DAC
+ registers using HAL_DAC_Init()
+ (+) Configure DAC_OUTx (DAC_OUT1: PA4, DAC_OUT2: PA5) in analog mode.
+ (+) Configure the DAC channel using HAL_DAC_ConfigChannel() function.
+ (+) Enable the DAC channel using HAL_DAC_Start() or HAL_DAC_Start_DMA functions
+
+ *** Polling mode IO operation ***
+ =================================
+ [..]
+ (+) Start the DAC peripheral using HAL_DAC_Start()
+ (+) To read the DAC last data output value value, use the HAL_DAC_GetValue() function.
+ (+) Stop the DAC peripheral using HAL_DAC_Stop()
+
+ *** DMA mode IO operation ***
+ ==============================
+ [..]
+ (+) Start the DAC peripheral using HAL_DAC_Start_DMA(), at this stage the user specify the length
+ of data to be transfered at each end of conversion
+ (+) At The end of data transfer HAL_DAC_ConvCpltCallbackCh1()or HAL_DAC_ConvCpltCallbackCh2()
+ function is executed and user can add his own code by customization of function pointer
+ HAL_DAC_ConvCpltCallbackCh1 or HAL_DAC_ConvCpltCallbackCh2
+ (+) In case of transfer Error, HAL_DAC_ErrorCallbackCh1() function is executed and user can
+ add his own code by customization of function pointer HAL_DAC_ErrorCallbackCh1
+ (+) Stop the DAC peripheral using HAL_DAC_Stop_DMA()
+
+ *** DAC HAL driver macros list ***
+ =============================================
+ [..]
+ Below the list of most used macros in DAC HAL driver.
+
+ (+) __HAL_DAC_ENABLE : Enable the DAC peripheral
+ (+) __HAL_DAC_DISABLE : Disable the DAC peripheral
+ (+) __HAL_DAC_CLEAR_FLAG: Clear the DAC's pending flags
+ (+) __HAL_DAC_GET_FLAG: Get the selected DAC's flag status
+
+ [..]
+ (@) You can refer to the DAC HAL driver header file for more useful macros
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+#ifdef HAL_DAC_MODULE_ENABLED
+
+#if defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined (STM32F098xx)
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup DAC DAC HAL module driver
+ * @brief DAC driver modules
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup DAC_Exported_Functions DAC Exported Functions
+ * @{
+ */
+
+/** @defgroup DAC_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Initialization and de-initialization functions #####
+ ==============================================================================
+ [..] This section provides functions allowing to:
+ (+) Initialize and configure the DAC.
+ (+) De-initialize the DAC.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the DAC peripheral according to the specified parameters
+ * in the DAC_InitStruct.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DAC_Init(DAC_HandleTypeDef* hdac)
+{
+ /* Check DAC handle */
+ if(hdac == NULL)
+ {
+ return HAL_ERROR;
+ }
+ /* Check the parameters */
+ assert_param(IS_DAC_ALL_INSTANCE(hdac->Instance));
+
+ if(hdac->State == HAL_DAC_STATE_RESET)
+ {
+ /* Init the low level hardware */
+ HAL_DAC_MspInit(hdac);
+ }
+
+ /* Initialize the DAC state*/
+ hdac->State = HAL_DAC_STATE_BUSY;
+
+ /* Set DAC error code to none */
+ hdac->ErrorCode = HAL_DAC_ERROR_NONE;
+
+ /* Initialize the DAC state*/
+ hdac->State = HAL_DAC_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Deinitializes the DAC peripheral registers to their default reset values.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DAC_DeInit(DAC_HandleTypeDef* hdac)
+{
+ /* Check DAC handle */
+ if(hdac == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_DAC_ALL_INSTANCE(hdac->Instance));
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_BUSY;
+
+ /* DeInit the low level hardware */
+ HAL_DAC_MspDeInit(hdac);
+
+ /* Set DAC error code to none */
+ hdac->ErrorCode = HAL_DAC_ERROR_NONE;
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hdac);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the DAC MSP.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval None
+ */
+__weak void HAL_DAC_MspInit(DAC_HandleTypeDef* hdac)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DAC_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes the DAC MSP.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval None
+ */
+__weak void HAL_DAC_MspDeInit(DAC_HandleTypeDef* hdac)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DAC_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup DAC_Exported_Functions_Group2 IO operation functions
+ * @brief IO operation functions
+ *
+@verbatim
+ ==============================================================================
+ ##### IO operation functions #####
+ ==============================================================================
+ [..] This section provides functions allowing to:
+ (+) Start conversion.
+ (+) Stop conversion.
+ (+) Start conversion and enable DMA transfer.
+ (+) Stop conversion and disable DMA transfer.
+ (+) Get result of conversion.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Enables DAC and starts conversion of channel.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @param Channel: The selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_CHANNEL_1: DAC Channel1 selected
+ * @arg DAC_CHANNEL_2: DAC Channel2 selected
+ * @retval HAL status
+ */
+__weak HAL_StatusTypeDef HAL_DAC_Start(DAC_HandleTypeDef* hdac, uint32_t Channel)
+{
+ /* Note : This function is defined into this file for library reference. */
+ /* Function content is located into file stm32f0xx_hal_dac_ex.c */
+
+ /* Return error status as not implemented here */
+ return HAL_ERROR;
+}
+
+/**
+ * @brief Disables DAC and stop conversion of channel.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @param Channel: The selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_CHANNEL_1: DAC Channel1 selected
+ * @arg DAC_CHANNEL_2: DAC Channel2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DAC_Stop(DAC_HandleTypeDef* hdac, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(Channel));
+
+ /* Disable the Peripheral */
+ __HAL_DAC_DISABLE(hdac, Channel);
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Enables DAC and starts conversion of channel.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @param Channel: The selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_CHANNEL_1: DAC Channel1 selected
+ * @arg DAC_CHANNEL_2: DAC Channel2 selected
+ * @param pData: The destination peripheral Buffer address.
+ * @param Length: The length of data to be transferred from memory to DAC peripheral
+ * @param Alignment: Specifies the data alignment for DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_ALIGN_8B_R: 8bit right data alignment selected
+ * @arg DAC_ALIGN_12B_L: 12bit left data alignment selected
+ * @arg DAC_ALIGN_12B_R: 12bit right data alignment selected
+ * @retval HAL status
+ */
+__weak HAL_StatusTypeDef HAL_DAC_Start_DMA(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t* pData, uint32_t Length, uint32_t Alignment)
+{
+ /* Note : This function is defined into this file for library reference. */
+ /* Function content is located into file stm32f0xx_hal_dac_ex.c */
+
+ /* Return error status as not implemented here */
+ return HAL_ERROR;
+}
+
+/**
+ * @brief Disables DAC and stop conversion of channel.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @param Channel: The selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_CHANNEL_1: DAC Channel1 selected
+ * @arg DAC_CHANNEL_2: DAC Channel2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DAC_Stop_DMA(DAC_HandleTypeDef* hdac, uint32_t Channel)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(Channel));
+
+ /* Disable the selected DAC channel DMA request */
+ hdac->Instance->CR &= ~(DAC_CR_DMAEN1 << Channel);
+
+ /* Disable the Peripharal */
+ __HAL_DAC_DISABLE(hdac, Channel);
+
+ /* Disable the DMA Channel */
+ /* Channel1 is used */
+ if (Channel == DAC_CHANNEL_1)
+ {
+ status = HAL_DMA_Abort(hdac->DMA_Handle1);
+ }
+ else /* Channel2 is used for */
+ {
+ status = HAL_DMA_Abort(hdac->DMA_Handle2);
+ }
+
+ /* Check if DMA Channel effectively disabled */
+ if (status != HAL_OK)
+ {
+ /* Update DAC state machine to error */
+ hdac->State = HAL_DAC_STATE_ERROR;
+ }
+ else
+ {
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_READY;
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Conversion complete callback in non blocking mode for Channel1
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval None
+ */
+__weak void HAL_DAC_ConvCpltCallbackCh1(DAC_HandleTypeDef* hdac)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DAC_ConvCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Conversion half DMA transfer callback in non blocking mode for Channel1
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval None
+ */
+__weak void HAL_DAC_ConvHalfCpltCallbackCh1(DAC_HandleTypeDef* hdac)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DAC_ConvHalfCpltCallbackCh1 could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Error DAC callback for Channel1.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval None
+ */
+__weak void HAL_DAC_ErrorCallbackCh1(DAC_HandleTypeDef *hdac)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DAC_ErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DMA underrun DAC callback for channel1.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval None
+ */
+__weak void HAL_DAC_DMAUnderrunCallbackCh1(DAC_HandleTypeDef *hdac)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DAC_DMAUnderrunCallbackCh1 could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup DAC_Exported_Functions_Group3 Peripheral Control functions
+ * @brief Peripheral Control functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral Control functions #####
+ ==============================================================================
+ [..] This section provides functions allowing to:
+ (+) Configure channels.
+ (+) Set the specified data holding register value for DAC channel.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Configures the selected DAC channel.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @param sConfig: DAC configuration structure.
+ * @param Channel: The selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_CHANNEL_1: DAC Channel1 selected
+ * @arg DAC_CHANNEL_2: DAC Channel2 selected
+ * @retval HAL status
+ */
+__weak HAL_StatusTypeDef HAL_DAC_ConfigChannel(DAC_HandleTypeDef* hdac, DAC_ChannelConfTypeDef* sConfig, uint32_t Channel)
+{
+ /* Note : This function is defined into this file for library reference. */
+ /* Function content is located into file stm32f0xx_hal_dac_ex.c */
+
+ /* Return error status as not implemented here */
+ return HAL_ERROR;
+}
+
+/**
+ * @brief Set the specified data holding register value for DAC channel.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @param Channel: The selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_CHANNEL_1: DAC Channel1 selected
+ * @arg DAC_CHANNEL_2: DAC Channel2 selected
+ * @param Alignment: Specifies the data alignment.
+ * This parameter can be one of the following values:
+ * @arg DAC_ALIGN_8B_R: 8bit right data alignment selected
+ * @arg DAC_ALIGN_12B_L: 12bit left data alignment selected
+ * @arg DAC_ALIGN_12B_R: 12bit right data alignment selected
+ * @param Data: Data to be loaded in the selected data holding register.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DAC_SetValue(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Alignment, uint32_t Data)
+{
+ __IO uint32_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(Channel));
+ assert_param(IS_DAC_ALIGN(Alignment));
+ assert_param(IS_DAC_DATA(Data));
+
+ tmp = (uint32_t)hdac->Instance;
+ if(Channel == DAC_CHANNEL_1)
+ {
+ tmp += __HAL_DHR12R1_ALIGNEMENT(Alignment);
+ }
+ else
+ {
+ tmp += __HAL_DHR12R2_ALIGNEMENT(Alignment);
+ }
+
+ /* Set the DAC channel1 selected data holding register */
+ *(__IO uint32_t *) tmp = Data;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Returns the last data output value of the selected DAC channel.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @param Channel: The selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_CHANNEL_1: DAC Channel1 selected
+ * @arg DAC_CHANNEL_2: DAC Channel2 selected
+ * @retval The selected DAC channel data output value.
+ */
+__weak uint32_t HAL_DAC_GetValue(DAC_HandleTypeDef* hdac, uint32_t Channel)
+{
+ /* Note : This function is defined into this file for library reference. */
+ /* Function content is located into file stm32f0xx_hal_dac_ex.c */
+
+ /* Return error status as not implemented here */
+ return HAL_ERROR;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup DAC_Exported_Functions_Group4 Peripheral State and Errors functions
+ * @brief Peripheral State and Errors functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral State and Errors functions #####
+ ==============================================================================
+ [..]
+ This subsection provides functions allowing to
+ (+) Check the DAC state.
+ (+) Check the DAC Errors.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief return the DAC state
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval HAL state
+ */
+HAL_DAC_StateTypeDef HAL_DAC_GetState(DAC_HandleTypeDef* hdac)
+{
+ /* Return DAC state */
+ return hdac->State;
+}
+
+
+/**
+ * @brief Return the DAC error code
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval DAC Error Code
+ */
+uint32_t HAL_DAC_GetError(DAC_HandleTypeDef *hdac)
+{
+ return hdac->ErrorCode;
+}
+
+/**
+ * @brief Handles DAC interrupt request
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval None
+ */
+__weak void HAL_DAC_IRQHandler(DAC_HandleTypeDef* hdac)
+{
+ /* Note : This function is defined into this file for library reference. */
+ /* Function content is located into file stm32f0xx_hal_dac_ex.c */
+}
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/src/stm32f0xx_hal_dac_ex.c b/f0/src/stm32f0xx_hal_dac_ex.c
new file mode 100755
index 0000000000000000000000000000000000000000..2e5da54561a331954a8e97aec673a4d853e7f79a
--- /dev/null
+++ b/f0/src/stm32f0xx_hal_dac_ex.c
@@ -0,0 +1,1083 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_dac_ex.c
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief DAC HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of DAC extension peripheral:
+ * + Extended features functions
+ *
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (+) When Dual mode is enabled (i.e DAC Channel1 and Channel2 are used simultaneously) :
+ Use HAL_DACEx_DualGetValue() to get digital data to be converted and use
+ HAL_DACEx_DualSetValue() to set digital value to converted simultaneously in Channel 1 and Channel 2.
+ (+) Use HAL_DACEx_TriangleWaveGenerate() to generate Triangle signal.
+ (+) Use HAL_DACEx_NoiseWaveGenerate() to generate Noise signal.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+#ifdef HAL_DAC_MODULE_ENABLED
+
+#if defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup DACEx DACEx Extended HAL module driver
+ * @brief DACEx driver module
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup DACEx_Private_Functions DACEx Private Functions
+ * @{
+ */
+static void DAC_DMAConvCpltCh1(DMA_HandleTypeDef *hdma);
+static void DAC_DMAErrorCh1(DMA_HandleTypeDef *hdma);
+static void DAC_DMAHalfConvCpltCh1(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+/** @defgroup DACEx_Exported_Functions DACEx Exported Functions
+ * @{
+ */
+
+/** @defgroup DACEx_Exported_Functions_Group1 Extended features functions
+ * @brief Extended features functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Extended features functions #####
+ ==============================================================================
+ [..] This section provides functions allowing to:
+ (+) Start conversion.
+ (+) Stop conversion.
+ (+) Start conversion and enable DMA transfer.
+ (+) Stop conversion and disable DMA transfer.
+ (+) Get result of conversion.
+ (+) Get result of dual mode conversion.
+
+@endverbatim
+ * @{
+ */
+
+#endif /* STM32F051x8 STM32F058xx */
+ /* STM32F071xB STM32F072xB STM32F078xx */
+ /* STM32F091xC STM32F098xx */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+/**
+ * @brief Configures the selected DAC channel.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @param sConfig: DAC configuration structure.
+ * @param Channel: The selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_CHANNEL_1: DAC Channel1 selected
+ * @arg DAC_CHANNEL_2: DAC Channel2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DAC_ConfigChannel(DAC_HandleTypeDef* hdac, DAC_ChannelConfTypeDef* sConfig, uint32_t Channel)
+{
+ uint32_t tmpreg1 = 0, tmpreg2 = 0;
+
+ /* Check the DAC parameters */
+ assert_param(IS_DAC_TRIGGER(sConfig->DAC_Trigger));
+ assert_param(IS_DAC_OUTPUT_BUFFER_STATE(sConfig->DAC_OutputBuffer));
+ assert_param(IS_DAC_TRIGGER(sConfig->DAC_Trigger));
+ assert_param(IS_DAC_CHANNEL(Channel));
+
+ /* Process locked */
+ __HAL_LOCK(hdac);
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_BUSY;
+
+ /* Get the DAC CR value */
+ tmpreg1 = DAC->CR;
+ /* Clear BOFFx, TENx, TSELx, WAVEx and MAMPx bits */
+ tmpreg1 &= ~(((uint32_t)(DAC_CR_MAMP1 | DAC_CR_WAVE1 | DAC_CR_TSEL1 | DAC_CR_TEN1 | DAC_CR_BOFF1)) << Channel);
+ /* Configure for the selected DAC channel: buffer output, trigger */
+ /* Set TSELx and TENx bits according to DAC_Trigger value */
+ /* Set BOFFx bit according to DAC_OutputBuffer value */
+ tmpreg2 = (sConfig->DAC_Trigger | sConfig->DAC_OutputBuffer);
+ /* Calculate CR register value depending on DAC_Channel */
+ tmpreg1 |= tmpreg2 << Channel;
+ /* Write to DAC CR */
+ DAC->CR = tmpreg1;
+ /* Disable wave generation */
+ DAC->CR &= ~(DAC_CR_WAVE1 << Channel);
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdac);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+#endif /* STM32F071xB STM32F072xB STM32F078xx */
+ /* STM32F091xC STM32F098xx */
+
+#if defined (STM32F051x8) || defined (STM32F058xx)
+
+/**
+ * @brief Configures the selected DAC channel.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @param sConfig: DAC configuration structure.
+ * @param Channel: The selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_CHANNEL_1: DAC Channel1 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DAC_ConfigChannel(DAC_HandleTypeDef* hdac, DAC_ChannelConfTypeDef* sConfig, uint32_t Channel)
+{
+ uint32_t tmpreg1 = 0, tmpreg2 = 0;
+
+ /* Check the DAC parameters */
+ assert_param(IS_DAC_TRIGGER(sConfig->DAC_Trigger));
+ assert_param(IS_DAC_OUTPUT_BUFFER_STATE(sConfig->DAC_OutputBuffer));
+ assert_param(IS_DAC_TRIGGER(sConfig->DAC_Trigger));
+ assert_param(IS_DAC_CHANNEL(Channel));
+
+ /* Process locked */
+ __HAL_LOCK(hdac);
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_BUSY;
+
+ /* Get the DAC CR value */
+ tmpreg1 = DAC->CR;
+ /* Clear BOFFx, TENx, TSELx, WAVEx and MAMPx bits */
+ // tmpreg1 &= ~(((uint32_t)(DAC_CR_MAMP1 | DAC_CR_WAVE1 | DAC_CR_TSEL1 | DAC_CR_TEN1 | DAC_CR_BOFF1)) << Channel);
+ tmpreg1 &= ~(((uint32_t)(DAC_CR_TSEL1 | DAC_CR_TEN1 | DAC_CR_BOFF1)) << Channel);
+ /* Configure for the selected DAC channel: buffer output, trigger */
+ /* Set TSELx and TENx bits according to DAC_Trigger value */
+ /* Set BOFFx bit according to DAC_OutputBuffer value */
+ tmpreg2 = (sConfig->DAC_Trigger | sConfig->DAC_OutputBuffer);
+ /* Calculate CR register value depending on DAC_Channel */
+ tmpreg1 |= tmpreg2 << Channel;
+ /* Write to DAC CR */
+ DAC->CR = tmpreg1;
+ /* Disable wave generation */
+ // DAC->CR &= ~(DAC_CR_WAVE1 << Channel);
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdac);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+#endif /* STM32F051x8 STM32F058xx */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+/* DAC 1 has 2 channels 1 & 2 */
+
+/**
+ * @brief Returns the last data output value of the selected DAC channel.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @param Channel: The selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_CHANNEL_1: DAC Channel1 selected
+ * @arg DAC_CHANNEL_2: DAC Channel2 selected
+ * @retval The selected DAC channel data output value.
+ */
+uint32_t HAL_DAC_GetValue(DAC_HandleTypeDef* hdac, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(Channel));
+
+ /* Returns the DAC channel data output register value */
+ if(Channel == DAC_CHANNEL_1)
+ {
+ return hdac->Instance->DOR1;
+ }
+ else
+ {
+ return hdac->Instance->DOR2;
+ }
+}
+
+#endif /* STM32F071xB STM32F072xB STM32F078xx */
+ /* STM32F091xC STM32F098xx */
+
+#if defined (STM32F051x8) || defined (STM32F058xx)
+
+/* DAC 1 has 1 channels */
+
+/**
+ * @brief Returns the last data output value of the selected DAC channel.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @param Channel: The selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_CHANNEL_1: DAC Channel1 selected
+ * @retval The selected DAC channel data output value.
+ */
+uint32_t HAL_DAC_GetValue(DAC_HandleTypeDef* hdac, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(Channel));
+
+ /* Returns the DAC channel data output register value */
+ return hdac->Instance->DOR1;
+}
+
+
+
+#endif /* STM32F051x8 STM32F058xx */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+/**
+ * @brief Enables DAC and starts conversion of channel.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @param Channel: The selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_CHANNEL_1: DAC Channel1 selected
+ * @arg DAC_CHANNEL_2: DAC Channel2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DAC_Start(DAC_HandleTypeDef* hdac, uint32_t Channel)
+{
+ uint32_t tmp1 = 0, tmp2 = 0;
+
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(Channel));
+
+ /* Process locked */
+ __HAL_LOCK(hdac);
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_BUSY;
+
+ /* Enable the Peripharal */
+ __HAL_DAC_ENABLE(hdac, Channel);
+
+ if(Channel == DAC_CHANNEL_1)
+ {
+ tmp1 = hdac->Instance->CR & DAC_CR_TEN1;
+ tmp2 = hdac->Instance->CR & DAC_CR_TSEL1;
+ /* Check if software trigger enabled */
+ if((tmp1 == DAC_CR_TEN1) && (tmp2 == DAC_CR_TSEL1))
+ {
+ /* Enable the selected DAC software conversion */
+ hdac->Instance->SWTRIGR |= (uint32_t)DAC_SWTRIGR_SWTRIG1;
+ }
+ }
+ else
+ {
+ tmp1 = hdac->Instance->CR & DAC_CR_TEN2;
+ tmp2 = hdac->Instance->CR & DAC_CR_TSEL2;
+ /* Check if software trigger enabled */
+ if((tmp1 == DAC_CR_TEN2) && (tmp2 == DAC_CR_TSEL2))
+ {
+ /* Enable the selected DAC software conversion*/
+ hdac->Instance->SWTRIGR |= (uint32_t)DAC_SWTRIGR_SWTRIG2;
+ }
+ }
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdac);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Enables DAC and starts conversion of channel.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @param Channel: The selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_CHANNEL_1: DAC Channel1 selected
+ * @arg DAC_CHANNEL_2: DAC Channel2 selected
+ * @param pData: The destination peripheral Buffer address.
+ * @param Length: The length of data to be transferred from memory to DAC peripheral
+ * @param Alignment: Specifies the data alignment for DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_ALIGN_8B_R: 8bit right data alignment selected
+ * @arg DAC_ALIGN_12B_L: 12bit left data alignment selected
+ * @arg DAC_ALIGN_12B_R: 12bit right data alignment selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DAC_Start_DMA(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t* pData, uint32_t Length, uint32_t Alignment)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(Channel));
+ assert_param(IS_DAC_ALIGN(Alignment));
+
+ /* Process locked */
+ __HAL_LOCK(hdac);
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_BUSY;
+
+ if(Channel == DAC_CHANNEL_1)
+ {
+ /* Set the DMA transfer complete callback for channel1 */
+ hdac->DMA_Handle1->XferCpltCallback = DAC_DMAConvCpltCh1;
+
+ /* Set the DMA half transfer complete callback for channel1 */
+ hdac->DMA_Handle1->XferHalfCpltCallback = DAC_DMAHalfConvCpltCh1;
+
+ /* Set the DMA error callback for channel1 */
+ hdac->DMA_Handle1->XferErrorCallback = DAC_DMAErrorCh1;
+
+ /* Enable the selected DAC channel1 DMA request */
+ hdac->Instance->CR |= DAC_CR_DMAEN1;
+
+ /* Case of use of channel 1 */
+ switch(Alignment)
+ {
+ case DAC_ALIGN_12B_R:
+ /* Get DHR12R1 address */
+ tmpreg = (uint32_t)&hdac->Instance->DHR12R1;
+ break;
+ case DAC_ALIGN_12B_L:
+ /* Get DHR12L1 address */
+ tmpreg = (uint32_t)&hdac->Instance->DHR12L1;
+ break;
+ case DAC_ALIGN_8B_R:
+ /* Get DHR8R1 address */
+ tmpreg = (uint32_t)&hdac->Instance->DHR8R1;
+ break;
+ default:
+ break;
+ }
+ }
+ else
+ {
+ /* Set the DMA transfer complete callback for channel2 */
+ hdac->DMA_Handle2->XferCpltCallback = DAC_DMAConvCpltCh2;
+
+ /* Set the DMA half transfer complete callback for channel2 */
+ hdac->DMA_Handle2->XferHalfCpltCallback = DAC_DMAHalfConvCpltCh2;
+
+ /* Set the DMA error callback for channel2 */
+ hdac->DMA_Handle2->XferErrorCallback = DAC_DMAErrorCh2;
+
+ /* Enable the selected DAC channel2 DMA request */
+ hdac->Instance->CR |= DAC_CR_DMAEN2;
+
+ /* Case of use of channel 2 */
+ switch(Alignment)
+ {
+ case DAC_ALIGN_12B_R:
+ /* Get DHR12R2 address */
+ tmpreg = (uint32_t)&hdac->Instance->DHR12R2;
+ break;
+ case DAC_ALIGN_12B_L:
+ /* Get DHR12L2 address */
+ tmpreg = (uint32_t)&hdac->Instance->DHR12L2;
+ break;
+ case DAC_ALIGN_8B_R:
+ /* Get DHR8R2 address */
+ tmpreg = (uint32_t)&hdac->Instance->DHR8R2;
+ break;
+ default:
+ break;
+ }
+ }
+
+ /* Enable the DMA channel */
+ if(Channel == DAC_CHANNEL_1)
+ {
+ /* Enable the DAC DMA underrun interrupt */
+ __HAL_DAC_ENABLE_IT(hdac, DAC_IT_DMAUDR1);
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hdac->DMA_Handle1, (uint32_t)pData, tmpreg, Length);
+ }
+ else
+ {
+ /* Enable the DAC DMA underrun interrupt */
+ __HAL_DAC_ENABLE_IT(hdac, DAC_IT_DMAUDR2);
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hdac->DMA_Handle2, (uint32_t)pData, tmpreg, Length);
+ }
+
+ /* Enable the Peripharal */
+ __HAL_DAC_ENABLE(hdac, Channel);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdac);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+
+
+#endif /* STM32F071xB STM32F072xB STM32F078xx */
+ /* STM32F091xC STM32F098xx */
+
+#if defined (STM32F051x8) || defined (STM32F058xx)
+
+HAL_StatusTypeDef HAL_DAC_Start(DAC_HandleTypeDef* hdac, uint32_t Channel)
+{
+ uint32_t tmp1 = 0, tmp2 = 0;
+
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(Channel));
+
+ /* Process locked */
+ __HAL_LOCK(hdac);
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_BUSY;
+
+ /* Enable the Peripharal */
+ __HAL_DAC_ENABLE(hdac, Channel);
+
+ if(Channel == DAC_CHANNEL_1)
+ {
+ tmp1 = hdac->Instance->CR & DAC_CR_TEN1;
+ tmp2 = hdac->Instance->CR & DAC_CR_TSEL1;
+ /* Check if software trigger enabled */
+ if((tmp1 == DAC_CR_TEN1) && (tmp2 == DAC_CR_TSEL1))
+ {
+ /* Enable the selected DAC software conversion */
+ hdac->Instance->SWTRIGR |= (uint32_t)DAC_SWTRIGR_SWTRIG1;
+ }
+ }
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdac);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Enables DAC and starts conversion of channel.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @param Channel: The selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_CHANNEL_1: DAC Channel1 selected
+ * @param pData: The destination peripheral Buffer address.
+ * @param Length: The length of data to be transferred from memory to DAC peripheral
+ * @param Alignment: Specifies the data alignment for DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_ALIGN_8B_R: 8bit right data alignment selected
+ * @arg DAC_ALIGN_12B_L: 12bit left data alignment selected
+ * @arg DAC_ALIGN_12B_R: 12bit right data alignment selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DAC_Start_DMA(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t* pData, uint32_t Length, uint32_t Alignment)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(Channel));
+ assert_param(IS_DAC_ALIGN(Alignment));
+
+ /* Process locked */
+ __HAL_LOCK(hdac);
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_BUSY;
+
+ /* Set the DMA transfer complete callback for channel1 */
+ hdac->DMA_Handle1->XferCpltCallback = DAC_DMAConvCpltCh1;
+
+ /* Set the DMA half transfer complete callback for channel1 */
+ hdac->DMA_Handle1->XferHalfCpltCallback = DAC_DMAHalfConvCpltCh1;
+
+ /* Set the DMA error callback for channel1 */
+ hdac->DMA_Handle1->XferErrorCallback = DAC_DMAErrorCh1;
+
+ /* Enable the selected DAC channel1 DMA request */
+ hdac->Instance->CR |= DAC_CR_DMAEN1;
+
+ /* Case of use of channel 1 */
+ switch(Alignment)
+ {
+ case DAC_ALIGN_12B_R:
+ /* Get DHR12R1 address */
+ tmpreg = (uint32_t)&hdac->Instance->DHR12R1;
+ break;
+ case DAC_ALIGN_12B_L:
+ /* Get DHR12L1 address */
+ tmpreg = (uint32_t)&hdac->Instance->DHR12L1;
+ break;
+ case DAC_ALIGN_8B_R:
+ /* Get DHR8R1 address */
+ tmpreg = (uint32_t)&hdac->Instance->DHR8R1;
+ break;
+ default:
+ break;
+ }
+
+ /* Enable the DMA channel */
+ /* Enable the DAC DMA underrun interrupt */
+ __HAL_DAC_ENABLE_IT(hdac, DAC_IT_DMAUDR1);
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hdac->DMA_Handle1, (uint32_t)pData, tmpreg, Length);
+
+ /* Enable the DAC DMA underrun interrupt */
+ __HAL_DAC_ENABLE_IT(hdac, DAC_IT_DMAUDR1);
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hdac->DMA_Handle1, (uint32_t)pData, tmpreg, Length);
+
+ /* Enable the Peripharal */
+ __HAL_DAC_ENABLE(hdac, Channel);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdac);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+#endif /* STM32F051x8 STM32F058xx */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+/* DAC channel 2 is available on top of DAC channel 1 */
+
+/**
+ * @brief Handles DAC interrupt request
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval None
+ */
+void HAL_DAC_IRQHandler(DAC_HandleTypeDef* hdac)
+{
+ /* Check Overrun flag */
+ if(__HAL_DAC_GET_FLAG(hdac, DAC_FLAG_DMAUDR1))
+ {
+ /* Change DAC state to error state */
+ hdac->State = HAL_DAC_STATE_ERROR;
+
+ /* Set DAC error code to chanel1 DMA underrun error */
+ hdac->ErrorCode |= HAL_DAC_ERROR_DMAUNDERRUNCH1;
+
+ /* Clear the underrun flag */
+ __HAL_DAC_CLEAR_FLAG(hdac,DAC_FLAG_DMAUDR1);
+
+ /* Disable the selected DAC channel1 DMA request */
+ hdac->Instance->CR &= ~DAC_CR_DMAEN1;
+
+ /* Error callback */
+ HAL_DAC_DMAUnderrunCallbackCh1(hdac);
+ }
+ else
+ {
+ /* Change DAC state to error state */
+ hdac->State = HAL_DAC_STATE_ERROR;
+
+ /* Set DAC error code to channel2 DMA underrun error */
+ hdac->ErrorCode |= HAL_DAC_ERROR_DMAUNDERRUNCH2;
+
+ /* Clear the underrun flag */
+ __HAL_DAC_CLEAR_FLAG(hdac,DAC_FLAG_DMAUDR2);
+
+ /* Disable the selected DAC channel1 DMA request */
+ hdac->Instance->CR &= ~DAC_CR_DMAEN2;
+
+ /* Error callback */
+ HAL_DACEx_DMAUnderrunCallbackCh2(hdac);
+ }
+}
+
+#endif /* STM32F071xB STM32F072xB STM32F078xx */
+ /* STM32F091xC STM32F098xx */
+
+#if defined (STM32F051x8) || defined (STM32F058xx)
+/* DAC channel 2 is NOT available. Only DAC channel 1 is available */
+
+/**
+ * @brief Handles DAC interrupt request
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval None
+ */
+void HAL_DAC_IRQHandler(DAC_HandleTypeDef* hdac)
+{
+ /* Check Overrun flag */
+ if(__HAL_DAC_GET_FLAG(hdac, DAC_FLAG_DMAUDR1))
+ {
+ /* Change DAC state to error state */
+ hdac->State = HAL_DAC_STATE_ERROR;
+
+ /* Set DAC error code to chanel1 DMA underrun error */
+ hdac->ErrorCode |= HAL_DAC_ERROR_DMAUNDERRUNCH1;
+
+ /* Clear the underrun flag */
+ __HAL_DAC_CLEAR_FLAG(hdac,DAC_FLAG_DMAUDR1);
+
+ /* Disable the selected DAC channel1 DMA request */
+ hdac->Instance->CR &= ~DAC_CR_DMAEN1;
+
+ /* Error callback */
+ HAL_DAC_DMAUnderrunCallbackCh1(hdac);
+ }
+}
+
+#endif /* STM32F051x8 STM32F058xx */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+/**
+ * @brief Returns the last data output value of the selected DAC channel.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval The selected DAC channel data output value.
+ */
+uint32_t HAL_DACEx_DualGetValue(DAC_HandleTypeDef* hdac)
+{
+ uint32_t tmp = 0;
+
+ tmp |= hdac->Instance->DOR1;
+
+ /* DAC channel 2 is present in DAC 1 */
+ tmp |= hdac->Instance->DOR2 << 16;
+
+ /* Returns the DAC channel data output register value */
+ return tmp;
+}
+
+#endif /* STM32F071xB STM32F072xB STM32F078xx */
+ /* STM32F091xC STM32F098xx */
+
+#if defined (STM32F051x8) || defined (STM32F058xx)
+
+/**
+ * @brief Returns the last data output value of the selected DAC channel.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval The selected DAC channel data output value.
+ */
+uint32_t HAL_DACEx_DualGetValue(DAC_HandleTypeDef* hdac)
+{
+ uint32_t tmp = 0;
+
+ tmp |= hdac->Instance->DOR1;
+
+ /* Returns the DAC channel data output register value */
+ return tmp;
+}
+
+#endif /* STM32F051x8 STM32F058xx */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+/**
+ * @brief Enables or disables the selected DAC channel wave generation.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @param Channel: The selected DAC channel.
+ * This parameter can be one of the following values:
+ * DAC_CHANNEL_1 / DAC_CHANNEL_2
+ * @param Amplitude: Select max triangle amplitude.
+ * This parameter can be one of the following values:
+ * @arg DAC_TRIANGLEAMPLITUDE_1: Select max triangle amplitude of 1
+ * @arg DAC_TRIANGLEAMPLITUDE_3: Select max triangle amplitude of 3
+ * @arg DAC_TRIANGLEAMPLITUDE_7: Select max triangle amplitude of 7
+ * @arg DAC_TRIANGLEAMPLITUDE_15: Select max triangle amplitude of 15
+ * @arg DAC_TRIANGLEAMPLITUDE_31: Select max triangle amplitude of 31
+ * @arg DAC_TRIANGLEAMPLITUDE_63: Select max triangle amplitude of 63
+ * @arg DAC_TRIANGLEAMPLITUDE_127: Select max triangle amplitude of 127
+ * @arg DAC_TRIANGLEAMPLITUDE_255: Select max triangle amplitude of 255
+ * @arg DAC_TRIANGLEAMPLITUDE_511: Select max triangle amplitude of 511
+ * @arg DAC_TRIANGLEAMPLITUDE_1023: Select max triangle amplitude of 1023
+ * @arg DAC_TRIANGLEAMPLITUDE_2047: Select max triangle amplitude of 2047
+ * @arg DAC_TRIANGLEAMPLITUDE_4095: Select max triangle amplitude of 4095
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DACEx_TriangleWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Amplitude)
+{
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(Channel));
+ assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(Amplitude));
+
+ /* Process locked */
+ __HAL_LOCK(hdac);
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_BUSY;
+
+ /* Enable the selected wave generation for the selected DAC channel */
+ MODIFY_REG(hdac->Instance->CR, ((DAC_CR_WAVE1)|(DAC_CR_MAMP1))<<Channel, (DAC_WAVE_TRIANGLE | Amplitude) << Channel);
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdac);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Enables or disables the selected DAC channel wave generation.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @param Channel: The selected DAC channel.
+ * This parameter can be one of the following values:
+ * DAC_CHANNEL_1 / DAC_CHANNEL_2
+ * @param Amplitude: Unmask DAC channel LFSR for noise wave generation.
+ * This parameter can be one of the following values:
+ * @arg DAC_LFSRUNMASK_BIT0: Unmask DAC channel LFSR bit0 for noise wave generation
+ * @arg DAC_LFSRUNMASK_BITS1_0: Unmask DAC channel LFSR bit[1:0] for noise wave generation
+ * @arg DAC_LFSRUNMASK_BITS2_0: Unmask DAC channel LFSR bit[2:0] for noise wave generation
+ * @arg DAC_LFSRUNMASK_BITS3_0: Unmask DAC channel LFSR bit[3:0] for noise wave generation
+ * @arg DAC_LFSRUNMASK_BITS4_0: Unmask DAC channel LFSR bit[4:0] for noise wave generation
+ * @arg DAC_LFSRUNMASK_BITS5_0: Unmask DAC channel LFSR bit[5:0] for noise wave generation
+ * @arg DAC_LFSRUNMASK_BITS6_0: Unmask DAC channel LFSR bit[6:0] for noise wave generation
+ * @arg DAC_LFSRUNMASK_BITS7_0: Unmask DAC channel LFSR bit[7:0] for noise wave generation
+ * @arg DAC_LFSRUNMASK_BITS8_0: Unmask DAC channel LFSR bit[8:0] for noise wave generation
+ * @arg DAC_LFSRUNMASK_BITS9_0: Unmask DAC channel LFSR bit[9:0] for noise wave generation
+ * @arg DAC_LFSRUNMASK_BITS10_0: Unmask DAC channel LFSR bit[10:0] for noise wave generation
+ * @arg DAC_LFSRUNMASK_BITS11_0: Unmask DAC channel LFSR bit[11:0] for noise wave generation
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DACEx_NoiseWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Amplitude)
+{
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(Channel));
+ assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(Amplitude));
+
+ /* Process locked */
+ __HAL_LOCK(hdac);
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_BUSY;
+
+ /* Enable the selected wave generation for the selected DAC channel */
+ MODIFY_REG(hdac->Instance->CR, ((DAC_CR_WAVE1)|(DAC_CR_MAMP1))<<Channel, (DAC_WAVE_NOISE | Amplitude) << Channel);
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdac);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+#endif /* STM32F071xB STM32F072xB STM32F078xx */
+ /* STM32F091xC STM32F098xx */
+
+#if defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+/**
+ * @brief Set the specified data holding register value for dual DAC channel.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @param Alignment: Specifies the data alignment for dual channel DAC.
+ * This parameter can be one of the following values:
+ * DAC_ALIGN_8B_R: 8bit right data alignment selected
+ * DAC_ALIGN_12B_L: 12bit left data alignment selected
+ * DAC_ALIGN_12B_R: 12bit right data alignment selected
+ * @param Data1: Data for DAC Channel2 to be loaded in the selected data holding register.
+ * @param Data2: Data for DAC Channel1 to be loaded in the selected data holding register.
+ * @note In dual mode, a unique register access is required to write in both
+ * DAC channels at the same time.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DACEx_DualSetValue(DAC_HandleTypeDef* hdac, uint32_t Alignment, uint32_t Data1, uint32_t Data2)
+{
+ uint32_t data = 0, tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_DAC_ALIGN(Alignment));
+ assert_param(IS_DAC_DATA(Data1));
+ assert_param(IS_DAC_DATA(Data2));
+
+ /* Calculate and set dual DAC data holding register value */
+ if (Alignment == DAC_ALIGN_8B_R)
+ {
+ data = ((uint32_t)Data2 << 8) | Data1;
+ }
+ else
+ {
+ data = ((uint32_t)Data2 << 16) | Data1;
+ }
+
+ tmp = (uint32_t)hdac->Instance;
+ tmp += __HAL_DHR12RD_ALIGNEMENT(Alignment);
+
+ /* Set the dual DAC selected data holding register */
+ *(__IO uint32_t *)tmp = data;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup DACEx_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief DMA conversion complete callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void DAC_DMAConvCpltCh1(DMA_HandleTypeDef *hdma)
+{
+ DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ HAL_DAC_ConvCpltCallbackCh1(hdac);
+
+ hdac->State= HAL_DAC_STATE_READY;
+}
+
+/**
+ * @brief DMA half transfer complete callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void DAC_DMAHalfConvCpltCh1(DMA_HandleTypeDef *hdma)
+{
+ DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ /* Conversion complete callback */
+ HAL_DAC_ConvHalfCpltCallbackCh1(hdac);
+}
+
+/**
+ * @brief DMA error callback
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void DAC_DMAErrorCh1(DMA_HandleTypeDef *hdma)
+{
+ DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ /* Set DAC error code to DMA error */
+ hdac->ErrorCode |= HAL_DAC_ERROR_DMA;
+
+ HAL_DAC_ErrorCallbackCh1(hdac);
+
+ hdac->State= HAL_DAC_STATE_READY;
+}
+/**
+ * @}
+ */
+#endif /* STM32F051x8 STM32F058xx */
+ /* STM32F071xB STM32F072xB STM32F078xx */
+ /* STM32F091xC STM32F098xx */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+/** @addtogroup DACEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup DACEx_Exported_Functions_Group1
+ * @brief Extended features functions
+ * @{
+ */
+/**
+ * @brief Conversion complete callback in non blocking mode for Channel2
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval None
+ */
+__weak void HAL_DACEx_ConvCpltCallbackCh2(DAC_HandleTypeDef* hdac)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DAC_ConvCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Conversion half DMA transfer callback in non blocking mode for Channel2
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval None
+ */
+__weak void HAL_DACEx_ConvHalfCpltCallbackCh2(DAC_HandleTypeDef* hdac)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DAC_ConvHalfCpltCallbackCh2 could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Error DAC callback for Channel2.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval None
+ */
+__weak void HAL_DACEx_ErrorCallbackCh2(DAC_HandleTypeDef *hdac)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DAC_ErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DMA underrun DAC callback for channel2.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval None
+ */
+__weak void HAL_DACEx_DMAUnderrunCallbackCh2(DAC_HandleTypeDef *hdac)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DAC_DMAUnderrunCallbackCh2 could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DMA conversion complete callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+void DAC_DMAConvCpltCh2(DMA_HandleTypeDef *hdma)
+{
+ DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ HAL_DACEx_ConvCpltCallbackCh2(hdac);
+
+ hdac->State= HAL_DAC_STATE_READY;
+}
+
+/**
+ * @brief DMA half transfer complete callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+void DAC_DMAHalfConvCpltCh2(DMA_HandleTypeDef *hdma)
+{
+ DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ /* Conversion complete callback */
+ HAL_DACEx_ConvHalfCpltCallbackCh2(hdac);
+}
+
+/**
+ * @brief DMA error callback
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+void DAC_DMAErrorCh2(DMA_HandleTypeDef *hdma)
+{
+ DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ /* Set DAC error code to DMA error */
+ hdac->ErrorCode |= HAL_DAC_ERROR_DMA;
+
+ HAL_DACEx_ErrorCallbackCh2(hdac);
+
+ hdac->State= HAL_DAC_STATE_READY;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F071xB STM32F072xB STM32F078xx */
+ /* STM32F091xC STM32F098xx */
+
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/src/stm32f0xx_hal_dma.c b/f0/src/stm32f0xx_hal_dma.c
new file mode 100755
index 0000000000000000000000000000000000000000..2933b93139583d663963a6def47f8f5140477976
--- /dev/null
+++ b/f0/src/stm32f0xx_hal_dma.c
@@ -0,0 +1,703 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_dma.c
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief DMA HAL module driver.
+ *
+ * This file provides firmware functions to manage the following
+ * functionalities of the Direct Memory Access (DMA) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral State and errors functions
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#) Enable and configure the peripheral to be connected to the DMA Channel
+ (except for internal SRAM / FLASH memories: no initialization is
+ necessary) please refer to Reference manual for connection between peripherals
+ and DMA requests .
+
+ (#) For a given Channel, program the required configuration through the following parameters:
+ Transfer Direction, Source and Destination data formats,
+ Circular or Normal mode, Channel Priority level, Source and Destination Increment mode,
+ using HAL_DMA_Init() function.
+
+ (#) Use HAL_DMA_GetState() function to return the DMA state and HAL_DMA_GetError() in case of error
+ detection.
+
+ (#) Use HAL_DMA_Abort() function to abort the current transfer
+
+ -@- In Memory-to-Memory transfer mode, Circular mode is not allowed.
+ *** Polling mode IO operation ***
+ =================================
+ [..]
+ (+) Use HAL_DMA_Start() to start DMA transfer after the configuration of Source
+ address and destination address and the Length of data to be transferred
+ (+) Use HAL_DMA_PollForTransfer() to poll for the end of current transfer, in this
+ case a fixed Timeout can be configured by User depending from his application.
+
+ *** Interrupt mode IO operation ***
+ ===================================
+ [..]
+ (+) Configure the DMA interrupt priority using HAL_NVIC_SetPriority()
+ (+) Enable the DMA IRQ handler using HAL_NVIC_EnableIRQ()
+ (+) Use HAL_DMA_Start_IT() to start DMA transfer after the configuration of
+ Source address and destination address and the Length of data to be transferred.
+ In this case the DMA interrupt is configured
+ (+) Use HAL_DMAy_Channelx_IRQHandler() called under DMA_IRQHandler() Interrupt subroutine
+ (+) At the end of data transfer HAL_DMA_IRQHandler() function is executed and user can
+ add his own function by customization of function pointer XferCpltCallback and
+ XferErrorCallback (i.e a member of DMA handle structure).
+
+ *** DMA HAL driver macros list ***
+ =============================================
+ [..]
+ Below the list of most used macros in DMA HAL driver.
+
+ (+) __HAL_DMA_ENABLE: Enable the specified DMA Channel.
+ (+) __HAL_DMA_DISABLE: Disable the specified DMA Channel.
+ (+) __HAL_DMA_GET_FLAG: Get the DMA Channel pending flags.
+ (+) __HAL_DMA_CLEAR_FLAG: Clear the DMA Channel pending flags.
+ (+) __HAL_DMA_ENABLE_IT: Enable the specified DMA Channel interrupts.
+ (+) __HAL_DMA_DISABLE_IT: Disable the specified DMA Channel interrupts.
+ (+) __HAL_DMA_GET_IT_SOURCE: Check whether the specified DMA Channel interrupt has occurred or not.
+
+ [..]
+ (@) You can refer to the DMA HAL driver header file for more useful macros
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup DMA DMA
+ * @brief DMA HAL module driver
+ * @{
+ */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup DMA_Private_Constants DMA Private Constants
+ * @{
+ */
+#define HAL_TIMEOUT_DMA_ABORT ((uint32_t)1000) /* 1s */
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup DMA_Private_Functions DMA Private Functions
+ * @{
+ */
+static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+/**
+ * @}
+ */
+
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup DMA_Exported_Functions DMA Exported Functions
+ * @{
+ */
+
+/** @defgroup DMA_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and de-initialization functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..]
+ This section provides functions allowing to initialize the DMA Channel source
+ and destination addresses, incrementation and data sizes, transfer direction,
+ circular/normal mode selection, memory-to-memory mode selection and Channel priority value.
+ [..]
+ The HAL_DMA_Init() function follows the DMA configuration procedures as described in
+ reference manual.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the DMA according to the specified
+ * parameters in the DMA_InitTypeDef and create the associated handle.
+ * @param hdma: Pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Channel.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma)
+{
+ uint32_t tmp = 0;
+
+ /* Check the DMA handle allocation */
+ if(hdma == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance));
+ assert_param(IS_DMA_DIRECTION(hdma->Init.Direction));
+ assert_param(IS_DMA_PERIPHERAL_INC_STATE(hdma->Init.PeriphInc));
+ assert_param(IS_DMA_MEMORY_INC_STATE(hdma->Init.MemInc));
+ assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(hdma->Init.PeriphDataAlignment));
+ assert_param(IS_DMA_MEMORY_DATA_SIZE(hdma->Init.MemDataAlignment));
+ assert_param(IS_DMA_MODE(hdma->Init.Mode));
+ assert_param(IS_DMA_PRIORITY(hdma->Init.Priority));
+
+ /* Change DMA peripheral state */
+ hdma->State = HAL_DMA_STATE_BUSY;
+
+ /* Get the CR register value */
+ tmp = hdma->Instance->CCR;
+
+ /* Clear PL, MSIZE, PSIZE, MINC, PINC, CIRC, DIR bits */
+ tmp &= ((uint32_t)~(DMA_CCR_PL | DMA_CCR_MSIZE | DMA_CCR_PSIZE | \
+ DMA_CCR_MINC | DMA_CCR_PINC | DMA_CCR_CIRC | \
+ DMA_CCR_DIR));
+
+ /* Prepare the DMA Channel configuration */
+ tmp |= hdma->Init.Direction |
+ hdma->Init.PeriphInc | hdma->Init.MemInc |
+ hdma->Init.PeriphDataAlignment | hdma->Init.MemDataAlignment |
+ hdma->Init.Mode | hdma->Init.Priority;
+
+ /* Write to DMA Channel CR register */
+ hdma->Instance->CCR = tmp;
+
+ /* Initialise the error code */
+ hdma->ErrorCode = HAL_DMA_ERROR_NONE;
+
+ /* Initialize the DMA state*/
+ hdma->State = HAL_DMA_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the DMA peripheral
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Channel.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma)
+{
+ /* Check the DMA handle allocation */
+ if(hdma == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance));
+
+ /* Check the DMA peripheral state */
+ if(hdma->State == HAL_DMA_STATE_BUSY)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Disable the selected DMA Channelx */
+ __HAL_DMA_DISABLE(hdma);
+
+ /* Reset DMA Channel control register */
+ hdma->Instance->CCR = 0;
+
+ /* Reset DMA Channel Number of Data to Transfer register */
+ hdma->Instance->CNDTR = 0;
+
+ /* Reset DMA Channel peripheral address register */
+ hdma->Instance->CPAR = 0;
+
+ /* Reset DMA Channel memory address register */
+ hdma->Instance->CMAR = 0;
+
+ /* Clear all flags */
+ __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_TC_FLAG_INDEX(hdma));
+ __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_TE_FLAG_INDEX(hdma));
+ __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_HT_FLAG_INDEX(hdma));
+
+ /* Initialise the error code */
+ hdma->ErrorCode = HAL_DMA_ERROR_NONE;
+
+ /* Initialize the DMA state */
+ hdma->State = HAL_DMA_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hdma);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Exported_Functions_Group2 Input and Output operation functions
+ * @brief I/O operation functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Configure the source, destination address and data length and Start DMA transfer
+ (+) Configure the source, destination address and data length and
+ Start DMA transfer with interrupt
+ (+) Abort DMA transfer
+ (+) Poll for transfer complete
+ (+) Handle DMA interrupt request
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Starts the DMA Transfer.
+ * @param hdma : pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Channel.
+ * @param SrcAddress: The source memory Buffer address
+ * @param DstAddress: The destination memory Buffer address
+ * @param DataLength: The length of data to be transferred from source to destination
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
+{
+ /* Process locked */
+ __HAL_LOCK(hdma);
+
+ /* Change DMA peripheral state */
+ hdma->State = HAL_DMA_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_DMA_BUFFER_SIZE(DataLength));
+
+ /* Disable the peripheral */
+ __HAL_DMA_DISABLE(hdma);
+
+ /* Configure the source, destination address and the data length */
+ DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength);
+
+ /* Enable the Peripheral */
+ __HAL_DMA_ENABLE(hdma);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Start the DMA Transfer with interrupt enabled.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Channel.
+ * @param SrcAddress: The source memory Buffer address
+ * @param DstAddress: The destination memory Buffer address
+ * @param DataLength: The length of data to be transferred from source to destination
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
+{
+ /* Process locked */
+ __HAL_LOCK(hdma);
+
+ /* Change DMA peripheral state */
+ hdma->State = HAL_DMA_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_DMA_BUFFER_SIZE(DataLength));
+
+ /* Disable the peripheral */
+ __HAL_DMA_DISABLE(hdma);
+
+ /* Configure the source, destination address and the data length */
+ DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength);
+
+ /* Enable the transfer complete interrupt */
+ __HAL_DMA_ENABLE_IT(hdma, DMA_IT_TC);
+
+ /* Enable the Half transfer complete interrupt */
+ __HAL_DMA_ENABLE_IT(hdma, DMA_IT_HT);
+
+ /* Enable the transfer Error interrupt */
+ __HAL_DMA_ENABLE_IT(hdma, DMA_IT_TE);
+
+ /* Enable the Peripheral */
+ __HAL_DMA_ENABLE(hdma);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Aborts the DMA Transfer.
+ * @param hdma : pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Channel.
+ *
+ * @note After disabling a DMA Channel, a check for wait until the DMA Channel is
+ * effectively disabled is added. If a Channel is disabled
+ * while a data transfer is ongoing, the current data will be transferred
+ * and the Channel will be effectively disabled only after the transfer of
+ * this single data is finished.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma)
+{
+ uint32_t tickstart = 0x00;
+
+ /* Disable the channel */
+ __HAL_DMA_DISABLE(hdma);
+
+ /* Get timeout */
+ tickstart = HAL_GetTick();
+
+ /* Check if the DMA Channel is effectively disabled */
+ while((hdma->Instance->CCR & DMA_CCR_EN) != 0)
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart) > HAL_TIMEOUT_DMA_ABORT)
+ {
+ /* Update error code */
+ SET_BIT(hdma->ErrorCode, HAL_DMA_ERROR_TIMEOUT);
+
+ /* Change the DMA state */
+ hdma->State = HAL_DMA_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ /* Change the DMA state*/
+ hdma->State = HAL_DMA_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Polling for transfer complete.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Channel.
+ * @param CompleteLevel: Specifies the DMA level complete.
+ * @param Timeout: Timeout duration.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, uint32_t CompleteLevel, uint32_t Timeout)
+{
+ uint32_t temp;
+ uint32_t tickstart = 0x00;
+
+ /* Get the level transfer complete flag */
+ if(CompleteLevel == HAL_DMA_FULL_TRANSFER)
+ {
+ /* Transfer Complete flag */
+ temp = __HAL_DMA_GET_TC_FLAG_INDEX(hdma);
+ }
+ else
+ {
+ /* Half Transfer Complete flag */
+ temp = __HAL_DMA_GET_HT_FLAG_INDEX(hdma);
+ }
+
+ /* Get timeout */
+ tickstart = HAL_GetTick();
+
+ while(__HAL_DMA_GET_FLAG(hdma, temp) == RESET)
+ {
+ if((__HAL_DMA_GET_FLAG(hdma, __HAL_DMA_GET_TE_FLAG_INDEX(hdma)) != RESET))
+ {
+ /* Clear the transfer error flags */
+ __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_TE_FLAG_INDEX(hdma));
+
+ /* Update error code */
+ SET_BIT(hdma->ErrorCode, HAL_DMA_ERROR_TE);
+
+ /* Change the DMA state */
+ hdma->State= HAL_DMA_STATE_ERROR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
+ return HAL_ERROR;
+ }
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0) || ((HAL_GetTick() - tickstart) > Timeout))
+ {
+ /* Update error code */
+ SET_BIT(hdma->ErrorCode, HAL_DMA_ERROR_TIMEOUT);
+
+ /* Change the DMA state */
+ hdma->State = HAL_DMA_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ if(CompleteLevel == HAL_DMA_FULL_TRANSFER)
+ {
+ /* Clear the transfer complete flag */
+ __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_TC_FLAG_INDEX(hdma));
+
+ /* The selected Channelx EN bit is cleared (DMA is disabled and
+ all transfers are complete) */
+ hdma->State = HAL_DMA_STATE_READY;
+
+ }
+ else
+ {
+ /* Clear the half transfer complete flag */
+ __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_HT_FLAG_INDEX(hdma));
+
+ /* The selected Channelx EN bit is cleared (DMA is disabled and
+ all transfers of half buffer are complete) */
+ hdma->State = HAL_DMA_STATE_READY_HALF;
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdma);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Handles DMA interrupt request.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Channel.
+ * @retval None
+ */
+void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma)
+{
+ /* Transfer Error Interrupt management ***************************************/
+ if(__HAL_DMA_GET_FLAG(hdma, __HAL_DMA_GET_TE_FLAG_INDEX(hdma)) != RESET)
+ {
+ if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_TE) != RESET)
+ {
+ /* Disable the transfer error interrupt */
+ __HAL_DMA_DISABLE_IT(hdma, DMA_IT_TE);
+
+ /* Clear the transfer error flag */
+ __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_TE_FLAG_INDEX(hdma));
+
+ /* Update error code */
+ SET_BIT(hdma->ErrorCode, HAL_DMA_ERROR_TE);
+
+ /* Change the DMA state */
+ hdma->State = HAL_DMA_STATE_ERROR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
+ if (hdma->XferErrorCallback != (void (*)(DMA_HandleTypeDef *))NULL)
+ {
+ /* Transfer error callback */
+ hdma->XferErrorCallback(hdma);
+ }
+ }
+ }
+
+ /* Half Transfer Complete Interrupt management ******************************/
+ if(__HAL_DMA_GET_FLAG(hdma, __HAL_DMA_GET_HT_FLAG_INDEX(hdma)) != RESET)
+ {
+ if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_HT) != RESET)
+ {
+ /* Disable the half transfer interrupt if the DMA mode is not CIRCULAR */
+ if((hdma->Instance->CCR & DMA_CCR_CIRC) == 0)
+ {
+ /* Disable the half transfer interrupt */
+ __HAL_DMA_DISABLE_IT(hdma, DMA_IT_HT);
+ }
+ /* Clear the half transfer complete flag */
+ __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_HT_FLAG_INDEX(hdma));
+
+ /* Change DMA peripheral state */
+ hdma->State = HAL_DMA_STATE_READY_HALF;
+
+ if(hdma->XferHalfCpltCallback != (void (*)(DMA_HandleTypeDef *))NULL)
+ {
+ /* Half transfer callback */
+ hdma->XferHalfCpltCallback(hdma);
+ }
+ }
+ }
+
+ /* Transfer Complete Interrupt management ***********************************/
+ if(__HAL_DMA_GET_FLAG(hdma, __HAL_DMA_GET_TC_FLAG_INDEX(hdma)) != RESET)
+ {
+ if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_TC) != RESET)
+ {
+ if((hdma->Instance->CCR & DMA_CCR_CIRC) == 0)
+ {
+ /* Disable the transfer complete interrupt */
+ __HAL_DMA_DISABLE_IT(hdma, DMA_IT_TC);
+ }
+ /* Clear the transfer complete flag */
+ __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_TC_FLAG_INDEX(hdma));
+
+ /* Update error code */
+ SET_BIT(hdma->ErrorCode, HAL_DMA_ERROR_NONE);
+
+ /* Change the DMA state */
+ hdma->State = HAL_DMA_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
+ if(hdma->XferCpltCallback != (void (*)(DMA_HandleTypeDef *))NULL)
+ {
+ /* Transfer complete callback */
+ hdma->XferCpltCallback(hdma);
+ }
+ }
+ }
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Exported_Functions_Group3 Peripheral State functions
+ * @brief Peripheral State functions
+ *
+@verbatim
+ ===============================================================================
+ ##### State and Errors functions #####
+ ===============================================================================
+ [..]
+ This subsection provides functions allowing to
+ (+) Check the DMA state
+ (+) Get error code
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Returns the DMA state.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Channel.
+ * @retval HAL state
+ */
+HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma)
+{
+ return hdma->State;
+}
+
+/**
+ * @brief Return the DMA error code
+ * @param hdma : pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Channel.
+ * @retval DMA Error Code
+ */
+uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma)
+{
+ return hdma->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup DMA_Private_Functions DMA Private Functions
+ * @{
+ */
+
+/**
+ * @brief Sets the DMA Transfer parameter.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Channel.
+ * @param SrcAddress: The source memory Buffer address
+ * @param DstAddress: The destination memory Buffer address
+ * @param DataLength: The length of data to be transferred from source to destination
+ * @retval HAL status
+ */
+static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
+{
+ /* Configure DMA Channel data length */
+ hdma->Instance->CNDTR = DataLength;
+
+ /* Peripheral to Memory */
+ if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH)
+ {
+ /* Configure DMA Channel destination address */
+ hdma->Instance->CPAR = DstAddress;
+
+ /* Configure DMA Channel source address */
+ hdma->Instance->CMAR = SrcAddress;
+ }
+ /* Memory to Peripheral */
+ else
+ {
+ /* Configure DMA Channel source address */
+ hdma->Instance->CPAR = SrcAddress;
+
+ /* Configure DMA Channel destination address */
+ hdma->Instance->CMAR = DstAddress;
+ }
+}
+
+/**
+ * @}
+ */
+
+#endif /* HAL_DMA_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/src/stm32f0xx_hal_flash.c b/f0/src/stm32f0xx_hal_flash.c
new file mode 100755
index 0000000000000000000000000000000000000000..1d0fa2db995dbe939a663e4da18e2b957f474e0a
--- /dev/null
+++ b/f0/src/stm32f0xx_hal_flash.c
@@ -0,0 +1,722 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_flash.c
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief FLASH HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the internal FLASH memory:
+ * + Program operations functions
+ * + Memory Control functions
+ * + Peripheral State functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### FLASH peripheral features #####
+ ==============================================================================
+ [..] The Flash memory interface manages CPU AHB I-Code and D-Code accesses
+ to the Flash memory. It implements the erase and program Flash memory operations
+ and the read and write protection mechanisms.
+
+ [..] The Flash memory interface accelerates code execution with a system of instruction
+ prefetch.
+
+ [..] The FLASH main features are:
+ (+) Flash memory read operations
+ (+) Flash memory program/erase operations
+ (+) Read / write protections
+ (+) Prefetch on I-Code
+ (+) Option Bytes programming
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ This driver provides functions and macros to configure and program the FLASH
+ memory of all STM32F0xx devices. These functions are split in 3 groups:
+
+ (#) FLASH Memory I/O Programming functions: this group includes all needed
+ functions to erase and program the main memory:
+ (++) Lock and Unlock the FLASH interface
+ (++) Erase function: Erase page, erase all pages
+ (++) Program functions: half word, word and doubleword
+
+ (#) Option Bytes Programming functions: this group includes all needed
+ functions to manage the Option Bytes:
+ (++) Lock and Unlock the Option Bytes
+ (++) Erase Option Bytes
+ (++) Set/Reset the write protection
+ (++) Set the Read protection Level
+ (++) Program the user Option Bytes
+ (++) Program the data Option Bytes
+ (++) Launch the Option Bytes loader
+
+ (#) Interrupts and flags management functions : this group
+ includes all needed functions to:
+ (++) Handle FLASH interrupts
+ (++) Wait for last FLASH operation according to its status
+ (++) Get error flag status
+
+ [..] In addition to these function, this driver includes a set of macros allowing
+ to handle the following operations:
+
+ (+) Set the latency
+ (+) Enable/Disable the prefetch buffer
+ (+) Enable/Disable the FLASH interrupts
+ (+) Monitor the FLASH flags status
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup FLASH FLASH HAL module driver
+ * @brief FLASH HAL module driver
+ * @{
+ */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup FLASH_Private_Defines FLASH Private Define
+ * @{
+ */
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup FLASH_Private_Macros FLASH Private Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup FLASH_Private_Variables FLASH Private Variables
+ * @{
+ */
+/* Variables used for Erase pages under interruption*/
+FLASH_ProcessTypeDef pFlash;
+/**
+ * @}
+ */
+
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup FLASH_Private_Functions FLASH Private Functions
+ * @{
+ */
+/* Erase operations */
+void FLASH_PageErase(uint32_t PageAddress);
+
+/* Program operations */
+static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data);
+
+HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
+static void FLASH_SetErrorCode(void);
+
+/**
+ * @}
+ */
+
+/* Exported functions ---------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Functions FLASH Exported Functions
+ * @{
+ */
+
+/** @defgroup FLASH_Exported_Functions_Group1 I/O operation functions
+ * @brief Data transfers functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the FLASH
+ program operations (write/erase).
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Program halfword, word or double word at a specified address
+ * @note The function HAL_FLASH_Unlock() should be called before to unlock the FLASH interface
+ * The function HAL_FLASH_Lock() should be called after to lock the FLASH interface
+ *
+ * @note If an erase and a program operations are requested simultaneously,
+ * the erase operation is performed before the program one.
+ *
+ * @note FLASH should be previously erased before new programmation (only exception to this
+ * is when 0x0000 is programmed)
+ *
+ * @param TypeProgram: Indicate the way to program at a specified address.
+ * This parameter can be a value of @ref FLASH_Type_Program
+ * @param Address: Specifies the address to be programmed.
+ * @param Data: Specifies the data to be programmed
+ *
+ * @retval HAL_StatusTypeDef HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data)
+{
+ HAL_StatusTypeDef status = HAL_ERROR;
+ uint8_t index = 0;
+ uint8_t nbiterations = 0;
+
+ /* Process Locked */
+ __HAL_LOCK(&pFlash);
+
+ /* Check the parameters */
+ assert_param(IS_TYPEPROGRAM(TypeProgram));
+ assert_param(IS_FLASH_PROGRAM_ADDRESS(Address));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)HAL_FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ if(TypeProgram == TYPEPROGRAM_HALFWORD)
+ {
+ /* Program halfword (16-bit) at a specified address. */
+ nbiterations = 1;
+ }
+ else if(TypeProgram == TYPEPROGRAM_WORD)
+ {
+ /* Program word (32-bit = 2*16-bit) at a specified address. */
+ nbiterations = 2;
+ }
+ else
+ {
+ /* Program double word (64-bit = 4*16-bit) at a specified address. */
+ nbiterations = 4;
+ }
+
+ for (index = 0; index < nbiterations; index++)
+ {
+ FLASH_Program_HalfWord((Address + (2*index)), (uint16_t)(Data >> (16*index)));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)HAL_FLASH_TIMEOUT_VALUE);
+
+ /* If the program operation is completed, disable the PG Bit */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_PG);
+
+ /* In case of error, stop programation procedure */
+ if (status != HAL_OK)
+ {
+ break;
+ }
+ }
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(&pFlash);
+
+ return status;
+}
+
+/**
+ * @brief Program halfword, word or double word at a specified address with interrupt enabled.
+ * @note The function HAL_FLASH_Unlock() should be called before to unlock the FLASH interface
+ * The function HAL_FLASH_Lock() should be called after to lock the FLASH interface
+ *
+ * @note If an erase and a program operations are requested simultaneously,
+ * the erase operation is performed before the program one.
+ *
+ * @param TypeProgram: Indicate the way to program at a specified address.
+ * This parameter can be a value of @ref FLASH_Type_Program
+ * @param Address: Specifies the address to be programmed.
+ * @param Data: Specifies the data to be programmed
+ *
+ * @retval HAL_StatusTypeDef HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Process Locked */
+ __HAL_LOCK(&pFlash);
+
+ /* Check the parameters */
+ assert_param(IS_TYPEPROGRAM(TypeProgram));
+ assert_param(IS_FLASH_PROGRAM_ADDRESS(Address));
+
+ /* Enable End of FLASH Operation and Error source interrupts */
+ __HAL_FLASH_ENABLE_IT((FLASH_IT_EOP | FLASH_IT_ERR));
+
+ pFlash.Address = Address;
+ pFlash.Data = Data;
+
+ if(TypeProgram == TYPEPROGRAM_HALFWORD)
+ {
+ pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAMHALFWORD;
+ /*Program halfword (16-bit) at a specified address.*/
+ pFlash.DataRemaining = 1;
+ }
+ else if(TypeProgram == TYPEPROGRAM_WORD)
+ {
+ pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAMWORD;
+ /*Program word (32-bit : 2*16-bit) at a specified address.*/
+ pFlash.DataRemaining = 2;
+ }
+ else
+ {
+ pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAMDOUBLEWORD;
+ /*Program double word (64-bit : 4*16-bit) at a specified address.*/
+ pFlash.DataRemaining = 4;
+ }
+
+ /*Program halfword (16-bit) at a specified address.*/
+ FLASH_Program_HalfWord(Address, (uint16_t)Data);
+
+ return status;
+}
+
+/**
+ * @brief This function handles FLASH interrupt request.
+ * @retval None
+ */
+void HAL_FLASH_IRQHandler(void)
+{
+ uint32_t addresstmp = 0;
+
+ /* Check FLASH operation error flags */
+ if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) ||__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR))
+ {
+ /*Save the Error code*/
+ FLASH_SetErrorCode();
+
+ /* FLASH error interrupt user callback */
+ HAL_FLASH_OperationErrorCallback(pFlash.Address);
+
+ /* Reset address and stop the procedure ongoing*/
+ pFlash.Address = 0xFFFFFFFF;
+ pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
+ }
+
+ /* Check FLASH End of Operation flag */
+ if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP))
+ {
+ /* Clear FLASH End of Operation pending bit */
+ __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP);
+
+ /* Process can continue only if no error detected */
+ if(pFlash.ProcedureOnGoing != FLASH_PROC_NONE)
+ {
+ if(pFlash.ProcedureOnGoing == FLASH_PROC_PAGEERASE)
+ {
+ /* Nb of pages to erased can be decreased */
+ pFlash.DataRemaining--;
+
+ /* Indicate user which page address has been erased*/
+ HAL_FLASH_EndOfOperationCallback(pFlash.Address);
+
+ /* Check if there are still pages to erase*/
+ if(pFlash.DataRemaining != 0)
+ {
+ /* Increment page address to next page */
+ pFlash.Address += FLASH_PAGE_SIZE;
+ addresstmp = pFlash.Address;
+
+ /* Operation is completed, disable the PER Bit */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_PER);
+
+ FLASH_PageErase(addresstmp);
+ }
+ else
+ {
+ /*No more pages to Erase*/
+
+ /*Reset Address and stop Erase pages procedure*/
+ pFlash.Address = 0xFFFFFFFF;
+ pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
+ }
+ }
+ else if(pFlash.ProcedureOnGoing == FLASH_PROC_MASSERASE)
+ {
+ /* Operation is completed, disable the MER Bit */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_MER);
+
+ /*MassErase ended. Return the selected bank*/
+ /* FLASH EOP interrupt user callback */
+ HAL_FLASH_EndOfOperationCallback(0);
+
+ /* Stop Mass Erase procedure*/
+ pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
+ }
+ else
+ {
+ /* Nb of 16-bit data to program can be decreased */
+ pFlash.DataRemaining--;
+
+ /* Check if there are still 16-bit data to program */
+ if(pFlash.DataRemaining != 0)
+ {
+ /* Increment address to 16-bit */
+ pFlash.Address += 2;
+ addresstmp = pFlash.Address;
+
+ /* Shift to have next 16-bit data */
+ pFlash.Data = (pFlash.Data >> 16);
+
+ /* Operation is completed, disable the PG Bit */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_PG);
+
+ /*Program halfword (16-bit) at a specified address.*/
+ FLASH_Program_HalfWord(addresstmp, (uint16_t)pFlash.Data);
+ }
+ else
+ {
+ /*Program ended. Return the selected address*/
+ /* FLASH EOP interrupt user callback */
+ if (pFlash.ProcedureOnGoing == FLASH_PROC_PROGRAMHALFWORD)
+ {
+ HAL_FLASH_EndOfOperationCallback(pFlash.Address);
+ }
+ else if (pFlash.ProcedureOnGoing == FLASH_PROC_PROGRAMWORD)
+ {
+ HAL_FLASH_EndOfOperationCallback(pFlash.Address-2);
+ }
+ else
+ {
+ HAL_FLASH_EndOfOperationCallback(pFlash.Address-6);
+ }
+
+ /* Reset Address and stop Program procedure*/
+ pFlash.Address = 0xFFFFFFFF;
+ pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
+ }
+ }
+ }
+ }
+
+ if(pFlash.ProcedureOnGoing == FLASH_PROC_NONE)
+ {
+ /* Operation is completed, disable the PG, PER and MER Bits */
+ CLEAR_BIT(FLASH->CR, (FLASH_CR_PG | FLASH_CR_PER | FLASH_CR_MER));
+
+ /* Disable End of FLASH Operation and Error source interrupts */
+ __HAL_FLASH_DISABLE_IT((FLASH_IT_EOP | FLASH_IT_ERR));
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(&pFlash);
+ }
+}
+
+
+/**
+ * @brief FLASH end of operation interrupt callback
+ * @param ReturnValue: The value saved in this parameter depends on the ongoing procedure
+ * - Mass Erase: No return value expected
+ * - Pages Erase: Address of the page which has been erased
+ * - Program: Address which was selected for data program
+ * @retval none
+ */
+__weak void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_FLASH_EndOfOperationCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief FLASH operation error interrupt callback
+ * @param ReturnValue: The value saved in this parameter depends on the ongoing procedure
+ * - Mass Erase: No return value expected
+ * - Pages Erase: Address of the page which returned an error
+ * - Program: Address which was selected for data program
+ * @retval none
+ */
+__weak void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_FLASH_OperationErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Exported_Functions_Group2 Peripheral Control functions
+ * @brief management functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the FLASH
+ memory operations.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Unlock the FLASH control register access
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASH_Unlock(void)
+{
+ if((READ_BIT(FLASH->CR, FLASH_CR_LOCK)) != RESET)
+ {
+ /* Authorize the FLASH Registers access */
+ WRITE_REG(FLASH->KEYR, FLASH_FKEY1);
+ WRITE_REG(FLASH->KEYR, FLASH_FKEY2);
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Locks the FLASH control register access
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASH_Lock(void)
+{
+ /* Set the LOCK Bit to lock the FLASH Registers access */
+ SET_BIT(FLASH->CR, FLASH_CR_LOCK);
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Unlock the FLASH Option Control Registers access.
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void)
+{
+ if((READ_BIT(FLASH->CR, FLASH_CR_OPTWRE)) == RESET)
+ {
+ /* Authorizes the Option Byte register programming */
+ WRITE_REG(FLASH->OPTKEYR, FLASH_OPTKEY1);
+ WRITE_REG(FLASH->OPTKEYR, FLASH_OPTKEY2);
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Lock the FLASH Option Control Registers access.
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASH_OB_Lock(void)
+{
+ /* Clear the OPTWRE Bit to lock the FLASH Option Byte Registers access */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_OPTWRE);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Launch the option byte loading.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FLASH_OB_Launch(void)
+{
+ /* Clean the error context */
+ pFlash.ErrorCode = FLASH_ERROR_NONE;
+
+ /* Set the bit to force the option byte reloading */
+ SET_BIT(FLASH->CR, FLASH_CR_OBL_LAUNCH);
+
+ /* Wait for last operation to be completed */
+ return(FLASH_WaitForLastOperation((uint32_t)HAL_FLASH_TIMEOUT_VALUE));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Exported_Functions_Group3 Peripheral State and Errors functions
+ * @brief Peripheral Errors functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Errors functions #####
+ ===============================================================================
+ [..]
+ This subsection permit to get in run-time Errors of the FLASH peripheral.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Get the specific FLASH error flag.
+ * @retval FLASH_ErrorCode: The returned value can be:
+ * @arg FLASH_ERROR_PG: FLASH Programming error flag
+ * @arg FLASH_ERROR_WRP: FLASH Write protected error flag
+ */
+uint32_t HAL_FLASH_GetError(void)
+{
+ return pFlash.ErrorCode;
+}
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup FLASH_Private_Functions
+ * @{
+ */
+/**
+ * @brief Erase the specified FLASH memory page
+ * @param PageAddress: FLASH page to erase
+ * The value of this parameter depend on device used within the same series
+ *
+ * @retval None
+ */
+void FLASH_PageErase(uint32_t PageAddress)
+{
+ /* Clean the error context */
+ pFlash.ErrorCode = FLASH_ERROR_NONE;
+
+ /* Proceed to erase the page */
+ SET_BIT(FLASH->CR, FLASH_CR_PER);
+ WRITE_REG(FLASH->AR, PageAddress);
+ SET_BIT(FLASH->CR, FLASH_CR_STRT);
+}
+
+/**
+ * @brief Program a half-word (16-bit) at a specified address.
+ * @param Address: specifies the address to be programmed.
+ * @param Data: specifies the data to be programmed.
+ * @retval None
+ */
+static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data)
+{
+ /* Clean the error context */
+ pFlash.ErrorCode = FLASH_ERROR_NONE;
+
+ /* Proceed to program the new data */
+ SET_BIT(FLASH->CR, FLASH_CR_PG);
+
+ *(__IO uint16_t*)Address = Data;
+}
+
+/**
+ * @brief Wait for a FLASH operation to complete.
+ * @param Timeout: maximum flash operationtimeout
+ * @retval HAL_StatusTypeDef HAL Status
+ */
+HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout)
+{
+ /* Wait for the FLASH operation to complete by polling on BUSY flag to be reset.
+ Even if the FLASH operation fails, the BUSY flag will be reset and an error
+ flag will be set */
+
+ uint32_t tickstart = HAL_GetTick();
+
+ while(__HAL_FLASH_GET_FLAG(FLASH_FLAG_BSY))
+ {
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0) || ((HAL_GetTick() - tickstart) > Timeout))
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Check FLASH End of Operation flag */
+ if (__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP))
+ {
+ /* Clear FLASH End of Operation pending bit */
+ __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP);
+ }
+
+ if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) || __HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR))
+ {
+ /*Save the error code*/
+ FLASH_SetErrorCode();
+ return HAL_ERROR;
+ }
+
+ /* If there is no error flag set */
+ return HAL_OK;
+
+}
+
+/**
+ * @brief Set the specific FLASH error flag.
+ * @retval None
+ */
+static void FLASH_SetErrorCode(void)
+{
+ if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR))
+ {
+ pFlash.ErrorCode |= FLASH_ERROR_WRP;
+ }
+ if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR))
+ {
+ pFlash.ErrorCode |= FLASH_ERROR_PG;
+ }
+
+ __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_WRPERR | FLASH_FLAG_PGERR);
+}
+
+/**
+ * @}
+ */
+
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/src/stm32f0xx_hal_flash_ex.c b/f0/src/stm32f0xx_hal_flash_ex.c
new file mode 100755
index 0000000000000000000000000000000000000000..8e4c5b4746f2d5d9abc0886fc2ace3092d5e04ab
--- /dev/null
+++ b/f0/src/stm32f0xx_hal_flash_ex.c
@@ -0,0 +1,854 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_flash_ex.c
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief Extended FLASH HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the FLASH peripheral:
+ * + Extended Initialization/de-initialization functions
+ * + Extended I/O operation functions
+ * + Extended Peripheral Control functions
+ * + Extended Peripheral State functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### Flash peripheral extended features #####
+ ==============================================================================
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..] This driver provides functions to configure and program the FLASH memory
+ of all STM32F0xxx devices. It includes
+
+ (+) Set/Reset the write protection
+ (+) Program the user Option Bytes
+ (+) Get the Read protection Level
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup FLASHEx FLASHEx Extended HAL module driver
+ * @brief FLASH Extended HAL module driver
+ * @{
+ */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+
+/** @addtogroup FLASHEx_Private_Constants FLASHEx Private Constants
+ * @{
+ */
+#define HAL_FLASH_TIMEOUT_VALUE ((uint32_t)50000)/* 50 s */
+
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @addtogroup FLASHEx_Private_Variables FLASHEx Private Variables
+ * @{
+ */
+
+/* Variables used for Erase pages under interruption*/
+extern FLASH_ProcessTypeDef pFlash;
+
+/**
+ * @}
+ */
+
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup FLASHEx_Private_Functions FLASHEx Private Functions
+ * @{
+ */
+
+/* Erase operations */
+extern void FLASH_PageErase(uint32_t PageAddress);
+static void FLASH_MassErase(void);
+
+/* Option bytes control */
+static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WriteProtectPage);
+static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WriteProtectPage);
+static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t ReadProtectLevel);
+static HAL_StatusTypeDef FLASH_OB_UserConfig(uint8_t UserConfig);
+static HAL_StatusTypeDef FLASH_OB_ProgramData(uint32_t Address, uint8_t Data);
+static uint32_t FLASH_OB_GetWRP(void);
+static FlagStatus FLASH_OB_GetRDP(void);
+static uint8_t FLASH_OB_GetUser(void);
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Extern_Functions FLASHEx Extern Functions
+ * @{
+ */
+/* Private functions ---------------------------------------------------------*/
+extern HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Exported_Functions FLASHEx Exported Functions
+ * @{
+ */
+
+/** @defgroup FLASHEx_Exported_Functions_Group2 Extended I/O operation functions
+ * @brief Extended I/O operation functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Perform a mass erase or erase the specified FLASH memory pages
+ * @note The function HAL_FLASH_Unlock() should be called before to unlock the FLASH interface
+ * The function HAL_FLASH_Lock() should be called after to lock the FLASH interface
+ * @param[in] pEraseInit: pointer to an FLASH_EraseInitTypeDef structure that
+ * contains the configuration information for the erasing.
+ *
+ * @param[out] PageError: pointer to variable that
+ * contains the configuration information on faulty page in case of error
+ * (0xFFFFFFFF means that all the pages have been correctly erased)
+ *
+ * @retval HAL_StatusTypeDef HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *PageError)
+{
+ HAL_StatusTypeDef status = HAL_ERROR;
+ uint32_t address = 0;
+
+ /* Process Locked */
+ __HAL_LOCK(&pFlash);
+
+ /* Check the parameters */
+ assert_param(IS_TYPEERASE(pEraseInit->TypeErase));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)HAL_FLASH_TIMEOUT_VALUE);
+
+ if (status == HAL_OK)
+ {
+ if (pEraseInit->TypeErase == TYPEERASE_MASSERASE)
+ {
+ /*Mass erase to be done*/
+ FLASH_MassErase();
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)HAL_FLASH_TIMEOUT_VALUE);
+
+ /* If the erase operation is completed, disable the MER Bit */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_MER);
+ }
+ else
+ {
+ /* Check the parameters */
+ assert_param(IS_FLASH_PROGRAM_ADDRESS(pEraseInit->PageAddress));
+ assert_param(IS_FLASH_NB_PAGES(pEraseInit->PageAddress, pEraseInit->NbPages));
+
+ /*Initialization of PageError variable*/
+ *PageError = 0xFFFFFFFF;
+
+ /* Erase by page by page to be done*/
+ for(address = pEraseInit->PageAddress;
+ address < (pEraseInit->PageAddress + (pEraseInit->NbPages)*FLASH_PAGE_SIZE);
+ address += FLASH_PAGE_SIZE)
+ {
+ FLASH_PageErase(address);
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)HAL_FLASH_TIMEOUT_VALUE);
+
+ /* If the erase operation is completed, disable the PER Bit */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_PER);
+
+ if (status != HAL_OK)
+ {
+ /* In case of error, stop erase procedure and return the faulty address */
+ *PageError = address;
+ break;
+ }
+ }
+ }
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(&pFlash);
+
+ return status;
+}
+
+/**
+ * @brief Perform a mass erase or erase the specified FLASH memory sectors with interrupt enabled
+ * @note The function HAL_FLASH_Unlock() should be called before to unlock the FLASH interface
+ * The function HAL_FLASH_Lock() should be called after to lock the FLASH interface
+ * @param pEraseInit: pointer to an FLASH_EraseInitTypeDef structure that
+ * contains the configuration information for the erasing.
+ *
+ * @retval HAL_StatusTypeDef HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Process Locked */
+ __HAL_LOCK(&pFlash);
+
+ /* If procedure already ongoing, reject the next one */
+ if (pFlash.ProcedureOnGoing != FLASH_PROC_NONE)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TYPEERASE(pEraseInit->TypeErase));
+
+ /* Enable End of FLASH Operation and Error source interrupts */
+ __HAL_FLASH_ENABLE_IT((FLASH_IT_EOP | FLASH_IT_ERR));
+
+ if (pEraseInit->TypeErase == TYPEERASE_MASSERASE)
+ {
+ /*Mass erase to be done*/
+ pFlash.ProcedureOnGoing = FLASH_PROC_MASSERASE;
+ FLASH_MassErase();
+ }
+ else
+ {
+ /* Erase by page to be done*/
+
+ /* Check the parameters */
+ assert_param(IS_FLASH_PROGRAM_ADDRESS(pEraseInit->PageAddress));
+ assert_param(IS_FLASH_NB_PAGES(pEraseInit->PageAddress, pEraseInit->NbPages));
+
+ pFlash.ProcedureOnGoing = FLASH_PROC_PAGEERASE;
+ pFlash.DataRemaining = pEraseInit->NbPages;
+ pFlash.Address = pEraseInit->PageAddress;
+
+ /*Erase 1st page and wait for IT*/
+ FLASH_PageErase(pEraseInit->PageAddress);
+ }
+
+ return status;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Exported_Functions_Group3 Extended Peripheral Control functions
+ * @brief Extended Peripheral Control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the FLASH
+ memory operations.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Erases the FLASH option bytes.
+ * @note This functions erases all option bytes except the Read protection (RDP).
+ * The function HAL_FLASH_Unlock() should be called before to unlock the FLASH interface
+ * The function HAL_FLASH_OB_Unlock() should be called before to unlock the options bytes
+ * The function HAL_FLASH_OB_Launch() should be called after to force the reload of the options bytes
+ * (system reset will occur)
+ * @retval HAL status
+ */
+
+HAL_StatusTypeDef HAL_FLASHEx_OBErase(void)
+{
+ uint8_t rdptmp = OB_RDP_LEVEL_0;
+ HAL_StatusTypeDef status = HAL_ERROR;
+ FLASH_OBProgramInitTypeDef optionsbytes;
+
+ /* Get the actual read protection Option Byte value */
+ HAL_FLASHEx_OBGetConfig(&optionsbytes);
+ if(optionsbytes.RDPLevel != RESET)
+ {
+ rdptmp = OB_RDP_LEVEL_1;
+ }
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)HAL_FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ /* Clean the error context */
+ pFlash.ErrorCode = FLASH_ERROR_NONE;
+
+ /* If the previous operation is completed, proceed to erase the option bytes */
+ SET_BIT(FLASH->CR, FLASH_CR_OPTER);
+ SET_BIT(FLASH->CR, FLASH_CR_STRT);
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)HAL_FLASH_TIMEOUT_VALUE);
+
+ /* If the erase operation is completed, disable the OPTER Bit */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_OPTER);
+
+ if(status == HAL_OK)
+ {
+ /* Restore the last read protection Option Byte value */
+ optionsbytes.OptionType = OPTIONBYTE_RDP;
+ optionsbytes.RDPLevel = rdptmp;
+ status = HAL_FLASHEx_OBProgram(&optionsbytes);
+ }
+ }
+
+ /* Return the erase status */
+ return status;
+}
+
+/**
+ * @brief Program option bytes
+ * @note The function HAL_FLASH_Unlock() should be called before to unlock the FLASH interface
+ * The function HAL_FLASH_OB_Unlock() should be called before to unlock the options bytes
+ * The function HAL_FLASH_OB_Launch() should be called after to force the reload of the options bytes
+ * (system reset will occur)
+ *
+ * @param pOBInit: pointer to an FLASH_OBInitStruct structure that
+ * contains the configuration information for the programming.
+ *
+ * @retval HAL_StatusTypeDef HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit)
+{
+ HAL_StatusTypeDef status = HAL_ERROR;
+
+ /* Check the parameters */
+ assert_param(IS_OPTIONBYTE(pOBInit->OptionType));
+
+ /* Write protection configuration */
+ if((pOBInit->OptionType & OPTIONBYTE_WRP) == OPTIONBYTE_WRP)
+ {
+ assert_param(IS_WRPSTATE(pOBInit->WRPState));
+ if (pOBInit->WRPState == WRPSTATE_ENABLE)
+ {
+ /* Enable of Write protection on the selected page */
+ status = FLASH_OB_EnableWRP(pOBInit->WRPPage);
+ }
+ else
+ {
+ /* Disable of Write protection on the selected page */
+ status = FLASH_OB_DisableWRP(pOBInit->WRPPage);
+ }
+ }
+
+ /* Read protection configuration */
+ if((pOBInit->OptionType & OPTIONBYTE_RDP) == OPTIONBYTE_RDP)
+ {
+ status = FLASH_OB_RDP_LevelConfig(pOBInit->RDPLevel);
+ }
+
+ /* USER configuration */
+ if((pOBInit->OptionType & OPTIONBYTE_USER) == OPTIONBYTE_USER)
+ {
+ status = FLASH_OB_UserConfig(pOBInit->USERConfig);
+ }
+
+ /* DATA configuration*/
+ if((pOBInit->OptionType & OPTIONBYTE_DATA) == OPTIONBYTE_DATA)
+ {
+ status = FLASH_OB_ProgramData(pOBInit->DATAAddress, pOBInit->DATAData);
+ }
+
+ return status;
+}
+
+/**
+ * @brief Get the Option byte configuration
+ * @param pOBInit: pointer to an FLASH_OBInitStruct structure that
+ * contains the configuration information for the programming.
+ *
+ * @retval None
+ */
+void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit)
+{
+ pOBInit->OptionType = OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER;
+
+ /*Get WRP*/
+ pOBInit->WRPPage = FLASH_OB_GetWRP();
+
+ /*Get RDP Level*/
+ pOBInit->RDPLevel = FLASH_OB_GetRDP();
+
+ /*Get USER*/
+ pOBInit->USERConfig = FLASH_OB_GetUser();
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Private_Functions FLASHEx Private Functions
+ * @{
+ */
+
+/**
+ * @brief Mass erase of FLASH memory
+ * @retval None
+ */
+static void FLASH_MassErase(void)
+{
+
+ /* Clean the error context */
+ pFlash.ErrorCode = FLASH_ERROR_NONE;
+
+ /* Proceed to erase all sectors */
+ SET_BIT(FLASH->CR, FLASH_CR_MER);
+ SET_BIT(FLASH->CR, FLASH_CR_STRT);
+}
+
+/**
+ * @brief Enable the write protection of the desired pages
+ * @note When the memory read protection level is selected (RDP level = 1),
+ * it is not possible to program or erase the flash page i if CortexM4
+ * debug features are connected or boot code is executed in RAM, even if nWRPi = 1
+ *
+ * @param WriteProtectPage: specifies the page(s) to be write protected.
+ * The value of this parameter depend on device used within the same series
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WriteProtectPage)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx) || defined(STM32F070x6) || \
+ defined(STM32F051x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F058xx)
+ uint16_t WRP0_Data = 0xFFFF;
+#if defined(STM32F030x8) || defined(STM32F051x8) || defined(STM32F058xx)
+ uint16_t WRP1_Data = 0xFFFF;
+#endif /* STM32F030x8 || STM32F051x8 || STM32F058xx */
+#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F038xx || STM32F051x8 || STM32F042x6 || STM32F048xx || STM32F058xx || STM32F070x6 */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+ uint16_t WRP0_Data = 0xFFFF, WRP1_Data = 0xFFFF, WRP2_Data = 0xFFFF, WRP3_Data = 0xFFFF;
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx || STM32F070xB || STM32F030xC */
+
+ /* Check the parameters */
+ assert_param(IS_OB_WRP(WriteProtectPage));
+
+ WriteProtectPage = (uint32_t)(~WriteProtectPage);
+#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx) || defined(STM32F070x6) || \
+ defined(STM32F051x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F058xx)
+ WRP0_Data = (uint16_t)(WriteProtectPage & OB_WRP_PAGES0TO31MASK);
+#if defined(STM32F030x8) || defined(STM32F051x8) || defined(STM32F058xx)
+ WRP1_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES32TO63MASK) >> 8);
+#endif /* STM32F030x8 || STM32F051x8 || STM32F058xx */
+#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F038xx || STM32F051x8 || STM32F042x6 || STM32F048xx || STM32F058xx || STM32F070x6 */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx)|| defined(STM32F030xC)
+ WRP0_Data = (uint16_t)(WriteProtectPage & OB_WRP_PAGES0TO15MASK);
+ WRP1_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES16TO31MASK) >> 8);
+ WRP2_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES32TO47MASK) >> 16);
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)
+ WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO63MASK) >> 24);
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx */
+#if defined(STM32F091xC) || defined(STM32F098xx)
+ WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO127MASK) >> 24);
+#endif /* STM32F091xC || STM32F098xx */
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx || STM32F070xB || STM32F030xC */
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)HAL_FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ /* Clean the error context */
+ pFlash.ErrorCode = FLASH_ERROR_NONE;
+
+ SET_BIT(FLASH->CR, FLASH_CR_OPTPG);
+
+ if(WRP0_Data != 0xFF)
+ {
+ OB->WRP0 &= WRP0_Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)HAL_FLASH_TIMEOUT_VALUE);
+ }
+
+#if defined(STM32F030x8) || defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+ if((status == HAL_OK) && (WRP1_Data != 0xFF))
+ {
+ OB->WRP1 &= WRP1_Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)HAL_FLASH_TIMEOUT_VALUE);
+ }
+#endif /* STM32F030x8 || STM32F051x8 || STM32F058xx || STM32F071xB || STM32F070xB ||
+ STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)|| defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+ if((status == HAL_OK) && (WRP2_Data != 0xFF))
+ {
+ OB->WRP2 &= WRP2_Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)HAL_FLASH_TIMEOUT_VALUE);
+ }
+
+ if((status == HAL_OK) && (WRP3_Data != 0xFF))
+ {
+ OB->WRP3 &= WRP3_Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)HAL_FLASH_TIMEOUT_VALUE);
+ }
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx || STM32F070xB || STM32F030xC*/
+
+ /* if the program operation is completed, disable the OPTPG Bit */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG);
+ }
+
+ return status;
+}
+
+/**
+ * @brief Disable the write protection of the desired pages
+ * @note When the memory read protection level is selected (RDP level = 1),
+ * it is not possible to program or erase the flash page i if CortexM4
+ * debug features are connected or boot code is executed in RAM, even if nWRPi = 1
+ *
+ * @param WriteProtectPage: specifies the page(s) to be write unprotected.
+ * The value of this parameter depend on device used within the same series
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WriteProtectPage)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx) || defined(STM32F070x6) || \
+ defined(STM32F051x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F058xx)
+ uint16_t WRP0_Data = 0xFFFF;
+#if defined(STM32F030x8) || defined(STM32F051x8) || defined(STM32F058xx)
+ uint16_t WRP1_Data = 0xFFFF;
+#endif /* STM32F030x8 || STM32F051x8 || STM32F058xx */
+#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F038xx || STM32F051x8 || STM32F042x6 || STM32F048xx || STM32F058xx || STM32F070x6 */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+ uint16_t WRP0_Data = 0xFFFF, WRP1_Data = 0xFFFF, WRP2_Data = 0xFFFF, WRP3_Data = 0xFFFF;
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx || STM32F070xB || STM32F030xC */
+
+ /* Check the parameters */
+ assert_param(IS_OB_WRP(WriteProtectPage));
+
+#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx) || STM32F070x6 || \
+ defined(STM32F051x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F058xx)
+ WRP0_Data = (uint16_t)(WriteProtectPage & OB_WRP_PAGES0TO31MASK);
+#if defined(STM32F030x8) || defined(STM32F051x8) || defined(STM32F058xx)
+ WRP1_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES32TO63MASK) >> 8);
+#endif /* STM32F030x8 || STM32F051x8 || STM32F058xx */
+#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F038xx || STM32F051x8 || STM32F042x6 || STM32F048xx || STM32F058xx || STM32F070x6 */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+ WRP0_Data = (uint16_t)(WriteProtectPage & OB_WRP_PAGES0TO15MASK);
+ WRP1_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES16TO31MASK) >> 8);
+ WRP2_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES32TO47MASK) >> 16);
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)
+ WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO63MASK) >> 24);
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx */
+#if defined(STM32F091xC) || defined(STM32F098xx)
+ WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO127MASK) >> 24);
+#endif /* STM32F091xC || STM32F098xx */
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx || STM32F030xC || STM32F070xB */
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)HAL_FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ /* Clean the error context */
+ pFlash.ErrorCode = FLASH_ERROR_NONE;
+
+ SET_BIT(FLASH->CR, FLASH_CR_OPTPG);
+
+ if(WRP0_Data != 0xFF)
+ {
+ OB->WRP0 |= WRP0_Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)HAL_FLASH_TIMEOUT_VALUE);
+ }
+
+#if defined(STM32F030x8) || defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+ if((status == HAL_OK) && (WRP1_Data != 0xFF))
+ {
+ OB->WRP1 |= WRP1_Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)HAL_FLASH_TIMEOUT_VALUE);
+ }
+#endif /* STM32F030x8 || STM32F051x8 || STM32F058xx || STM32F071xB || STM32F070xB ||
+ STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+ if((status == HAL_OK) && (WRP2_Data != 0xFF))
+ {
+ OB->WRP2 |= WRP2_Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)HAL_FLASH_TIMEOUT_VALUE);
+ }
+
+ if((status == HAL_OK) && (WRP3_Data != 0xFF))
+ {
+ OB->WRP3 |= WRP3_Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)HAL_FLASH_TIMEOUT_VALUE);
+ }
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx || STM32F070xB || STM32F030xC */
+
+ /* if the program operation is completed, disable the OPTPG Bit */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG);
+ }
+ return status;
+}
+
+/**
+ * @brief Set the read protection level.
+ * @param ReadProtectLevel: specifies the read protection level.
+ * This parameter can be one of the following values:
+ * @arg OB_RDP_LEVEL_0: No protection
+ * @arg OB_RDP_LEVEL_1: Read protection of the memory
+ * @arg OB_RDP_LEVEL_2: Full chip protection
+ *
+ * @note Warning: When enabling OB_RDP level 2 it's no more possible to go back to level 1 or 0
+ *
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t ReadProtectLevel)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_OB_RDP_LEVEL(ReadProtectLevel));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)HAL_FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ /* Clean the error context */
+ pFlash.ErrorCode = FLASH_ERROR_NONE;
+
+ /* Enable the Option Bytes Programming operation */
+ SET_BIT(FLASH->CR, FLASH_CR_OPTPG);
+
+ WRITE_REG(OB->RDP, ReadProtectLevel);
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)HAL_FLASH_TIMEOUT_VALUE);
+
+ /* if the program operation is completed, disable the OPTPG Bit */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG);
+ }
+
+ return status;
+}
+
+/**
+ * @brief Program the FLASH User Option Byte.
+ * @note Programming of the OB should be performed only after an erase (otherwise PGERR occurs)
+ * @param UserConfig: The FLASH User Option Bytes values: IWDG_SW(Bit0), RST_STOP(Bit1), RST_STDBY(Bit2), BOOT1(Bit4),
+ * VDDA_Analog_Monitoring(Bit5) and SRAM_Parity_Enable(Bit6).
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef FLASH_OB_UserConfig(uint8_t UserConfig)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_OB_WDG_SOURCE((UserConfig&OB_WDG_SW)));
+ assert_param(IS_OB_STOP_SOURCE((UserConfig&OB_STOP_NO_RST)));
+ assert_param(IS_OB_STDBY_SOURCE((UserConfig&OB_STDBY_NO_RST)));
+ assert_param(IS_OB_BOOT1((UserConfig&OB_BOOT1_SET)));
+ assert_param(IS_OB_VDDA_ANALOG((UserConfig&OB_VDDA_ANALOG_ON)));
+ assert_param(IS_OB_SRAM_PARITY((UserConfig&OB_RAM_PARITY_CHECK_RESET)));
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)|| defined(STM32F070x6)
+ assert_param(IS_OB_BOOT_SEL((UserConfig&OB_BOOT_SEL_SET)));
+ assert_param(IS_OB_BOOT0((UserConfig&OB_BOOT0_SET)));
+#endif /* STM32F042x6 || STM32F048xx || STM32F091xC || STM32F098xx || STM32F030xC || STM32F070x6 */
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)HAL_FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ /* Clean the error context */
+ pFlash.ErrorCode = FLASH_ERROR_NONE;
+
+ /* Enable the Option Bytes Programming operation */
+ SET_BIT(FLASH->CR, FLASH_CR_OPTPG);
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)|| defined(STM32F070x6)
+ OB->USER = UserConfig;
+#else
+ OB->USER = (UserConfig | 0x88);
+#endif /* STM32F042x6 || STM32F048xx || STM32F091xC || STM32F098xx || STM32F030xC || STM32F070x6 */
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)HAL_FLASH_TIMEOUT_VALUE);
+
+ /* if the program operation is completed, disable the OPTPG Bit */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG);
+ }
+
+ return status;
+}
+
+/**
+ * @brief Programs a half word at a specified Option Byte Data address.
+ * @note The function HAL_FLASH_Unlock() should be called before to unlock the FLASH interface
+ * The function HAL_FLASH_OB_Unlock() should be called before to unlock the options bytes
+ * The function HAL_FLASH_OB_Launch() should be called after to force the reload of the options bytes
+ * (system reset will occur)
+ * Programming of the OB should be performed only after an erase (otherwise PGERR occurs)
+ * @param Address: specifies the address to be programmed.
+ * This parameter can be 0x1FFFF804 or 0x1FFFF806.
+ * @param Data: specifies the data to be programmed.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef FLASH_OB_ProgramData(uint32_t Address, uint8_t Data)
+{
+ HAL_StatusTypeDef status = HAL_ERROR;
+
+ /* Check the parameters */
+ assert_param(IS_OB_DATA_ADDRESS(Address));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)HAL_FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ /* Clean the error context */
+ pFlash.ErrorCode = FLASH_ERROR_NONE;
+
+ /* Enables the Option Bytes Programming operation */
+ SET_BIT(FLASH->CR, FLASH_CR_OPTPG);
+ *(__IO uint16_t*)Address = Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)HAL_FLASH_TIMEOUT_VALUE);
+
+ /* If the program operation is completed, disable the OPTPG Bit */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG);
+ }
+ /* Return the Option Byte Data Program Status */
+ return status;
+}
+
+/**
+ * @brief Return the FLASH Write Protection Option Bytes value.
+ * @retval The FLASH Write Protection Option Bytes value
+ */
+static uint32_t FLASH_OB_GetWRP(void)
+{
+ /* Return the FLASH write protection Register value */
+ return (uint32_t)(READ_REG(FLASH->WRPR));
+}
+
+/**
+ * @brief Returns the FLASH Read Protection level.
+ * @retval FLASH ReadOut Protection Status:
+ * - SET, when OB_RDP_Level_1 or OB_RDP_Level_2 is set
+ * - RESET, when OB_RDP_Level_0 is set
+ */
+static FlagStatus FLASH_OB_GetRDP(void)
+{
+ FlagStatus readstatus = RESET;
+
+ if ((uint8_t)READ_BIT(FLASH->OBR, FLASH_OBR_RDPRT1) != RESET)
+ {
+ readstatus = SET;
+ }
+
+ return readstatus;
+}
+
+/**
+ * @brief Return the FLASH User Option Byte value.
+ * @retval The FLASH User Option Bytes values: IWDG_SW(Bit0), RST_STOP(Bit1), RST_STDBY(Bit2), BOOT1(Bit4),
+ * VDDA_Analog_Monitoring(Bit5) and SRAM_Parity_Enable(Bit6).
+ */
+static uint8_t FLASH_OB_GetUser(void)
+{
+ /* Return the User Option Byte */
+ return (uint8_t)(READ_REG(FLASH->OBR) >> 8);
+}
+
+/**
+ * @}
+ */
+
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/src/stm32f0xx_hal_gpio.c b/f0/src/stm32f0xx_hal_gpio.c
new file mode 100755
index 0000000000000000000000000000000000000000..dabc7d19107bfbb0fb008f8935ea99beb0c69069
--- /dev/null
+++ b/f0/src/stm32f0xx_hal_gpio.c
@@ -0,0 +1,561 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_gpio.c
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief GPIO HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the General Purpose Input/Output (GPIO) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### GPIO Peripheral features #####
+ ==============================================================================
+ [..]
+ Each port bit of the general-purpose I/O (GPIO) ports can be individually
+ configured by software in several modes:
+ (+) Input mode
+ (+) Analog mode
+ (+) Output mode
+ (+) Alternate function mode
+ (+) External interrupt/event lines
+
+ [..]
+ During and just after reset, the alternate functions and external interrupt
+ lines are not active and the I/O ports are configured in input floating mode.
+
+ [..]
+ All GPIO pins have weak internal pull-up and pull-down resistors, which can be
+ activated or not.
+
+ [..]
+ In Output or Alternate mode, each IO can be configured on open-drain or push-pull
+ type and the IO speed can be selected depending on the VDD value.
+
+ [..]
+ The microcontroller IO pins are connected to onboard peripherals/modules through a
+ multiplexer that allows only one peripheral s alternate function (AF) connected
+ to an IO pin at a time. In this way, there can be no conflict between peripherals
+ sharing the same IO pin.
+
+ [..]
+ All ports have external interrupt/event capability. To use external interrupt
+ lines, the port must be configured in input mode. All available GPIO pins are
+ connected to the 16 external interrupt/event lines from EXTI0 to EXTI15.
+
+ [..]
+ The external interrupt/event controller consists of up to 28 edge detectors
+ (depending on products 16 lines are connected to GPIO) for generating event/interrupt
+ requests (each input line can be independently configured to select the type
+ (interrupt or event) and the corresponding trigger event (rising or falling or both).
+ Each line can also be masked independently.
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#) Enable the GPIO AHB clock using the following function : __GPIOx_CLK_ENABLE().
+
+ (#) Configure the GPIO pin(s) using HAL_GPIO_Init().
+ (++) Configure the IO mode using "Mode" member from GPIO_InitTypeDef structure
+ (++) Activate Pull-up, Pull-down resistor using "Pull" member from GPIO_InitTypeDef
+ structure.
+ (++) In case of Output or alternate function mode selection: the speed is
+ configured through "Speed" member from GPIO_InitTypeDef structure,
+ the speed is configurable: Low, Medium and High.
+ (++) If alternate mode is selected, the alternate function connected to the IO
+ is configured through "Alternate" member from GPIO_InitTypeDef structure
+ (++) Analog mode is required when a pin is to be used as ADC channel
+ or DAC output.
+ (++) In case of external interrupt/event selection the "Mode" member from
+ GPIO_InitTypeDef structure select the type (interrupt or event) and
+ the corresponding trigger event (rising or falling or both).
+
+ (#) In case of external interrupt/event mode selection, configure NVIC IRQ priority
+ mapped to the EXTI line using HAL_NVIC_SetPriority() and enable it using
+ HAL_NVIC_EnableIRQ().
+
+ (#) HAL_GPIO_DeInit allows to set register values to their reset value. It's also
+ recommended to use it to unconfigure pin which was used as an external interrupt
+ or in event mode. That's the only way to reset corresponding bit in EXTI & SYSCFG
+ registers.
+
+ (#) To get the level of a pin configured in input mode use HAL_GPIO_ReadPin().
+
+ (#) To set/reset the level of a pin configured in output mode use
+ HAL_GPIO_WritePin()/HAL_GPIO_TogglePin().
+
+ (#) To lock pin configuration until next reset use HAL_GPIO_LockPin().
+
+ (#) During and just after reset, the alternate functions are not
+ active and the GPIO pins are configured in input floating mode (except JTAG
+ pins).
+
+ (#) The LSE oscillator pins OSC32_IN and OSC32_OUT can be used as general purpose
+ (PC14 and PC15, respectively) when the LSE oscillator is off. The LSE has
+ priority over the GPIO function.
+
+ (#) The HSE oscillator pins OSC_IN/OSC_OUT can be used as
+ general purpose PD0 and PD1, respectively, when the HSE oscillator is off.
+ The HSE has priority over the GPIO function.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup GPIO GPIO HAL module driver
+ * @brief GPIO HAL module driver
+ * @{
+ */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup GPIO_Private_Define GPIO Private Define
+ * @{
+ */
+#define GPIO_MODE ((uint32_t)0x00000003)
+#define EXTI_MODE ((uint32_t)0x10000000)
+#define GPIO_MODE_IT ((uint32_t)0x00010000)
+#define GPIO_MODE_EVT ((uint32_t)0x00020000)
+#define RISING_EDGE ((uint32_t)0x00100000)
+#define FALLING_EDGE ((uint32_t)0x00200000)
+#define GPIO_OUTPUT_TYPE ((uint32_t)0x00000010)
+
+#define GPIO_NUMBER ((uint32_t)16)
+
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exporte functions ---------------------------------------------------------*/
+
+/** @defgroup GPIO_Exported_Functions GPIO Exported Functions
+ * @{
+ */
+
+/** @defgroup GPIO_Exported_Functions_Group1 Initialization/de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the GPIOx peripheral according to the specified parameters in the GPIO_Init.
+ * @param GPIOx: where x can be (A..F) to select the GPIO peripheral for STM32F0 family
+ * @note GPIOD is only available on STM32F05xx, STM32F07xx and STM32F09xx
+ * @note GPIOE is only available on STM32F07xx and STM32F09xx
+ * @param GPIO_Init: pointer to a GPIO_InitTypeDef structure that contains
+ * the configuration information for the specified GPIO peripheral.
+ * @retval None
+ */
+void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init)
+{
+ uint32_t position = 0x00;
+ uint32_t iocurrent = 0x00;
+ uint32_t temp = 0x00;
+
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
+ assert_param(IS_GPIO_PIN(GPIO_Init->Pin));
+ assert_param(IS_GPIO_MODE(GPIO_Init->Mode));
+ assert_param(IS_GPIO_PULL(GPIO_Init->Pull));
+
+ /* Configure the port pins */
+ while ((GPIO_Init->Pin) >> position)
+ {
+ /* Get current io position */
+ iocurrent = (GPIO_Init->Pin) & (1 << position);
+
+ if(iocurrent)
+ {
+ /*--------------------- GPIO Mode Configuration ------------------------*/
+ /* In case of Alternate function mode selection */
+ if((GPIO_Init->Mode == GPIO_MODE_AF_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_OD))
+ {
+ /* Check the Alternate function parameters */
+ assert_param(IS_GPIO_AF_INSTANCE(GPIOx));
+ assert_param(IS_GPIO_AF(GPIO_Init->Alternate));
+
+ /* Configure Alternate function mapped with the current IO */
+ temp = GPIOx->AFR[position >> 3];
+ temp &= ~((uint32_t)0xF << ((uint32_t)(position & (uint32_t)0x07) * 4)) ;
+ temp |= ((uint32_t)(GPIO_Init->Alternate) << (((uint32_t)position & (uint32_t)0x07) * 4));
+ GPIOx->AFR[position >> 3] = temp;
+ }
+
+ /* Configure IO Direction mode (Input, Output, Alternate or Analog) */
+ temp = GPIOx->MODER;
+ temp &= ~(GPIO_MODER_MODER0 << (position * 2));
+ temp |= ((GPIO_Init->Mode & GPIO_MODE) << (position * 2));
+ GPIOx->MODER = temp;
+
+ /* In case of Output or Alternate function mode selection */
+ if ((GPIO_Init->Mode == GPIO_MODE_OUTPUT_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_PP) ||
+ (GPIO_Init->Mode == GPIO_MODE_OUTPUT_OD) || (GPIO_Init->Mode == GPIO_MODE_AF_OD))
+ {
+ /* Check the Speed parameter */
+ assert_param(IS_GPIO_SPEED(GPIO_Init->Speed));
+ /* Configure the IO Speed */
+ temp = GPIOx->OSPEEDR;
+ temp &= ~(GPIO_OSPEEDER_OSPEEDR0 << (position * 2));
+ temp |= (GPIO_Init->Speed << (position * 2));
+ GPIOx->OSPEEDR = temp;
+
+ /* Configure the IO Output Type */
+ temp = GPIOx->OTYPER;
+ temp &= ~(GPIO_OTYPER_OT_0 << position) ;
+ temp |= (((GPIO_Init->Mode & GPIO_OUTPUT_TYPE) >> 4) << position);
+ GPIOx->OTYPER = temp;
+ }
+
+ /* Activate the Pull-up or Pull down resistor for the current IO */
+ temp = GPIOx->PUPDR;
+ temp &= ~(GPIO_PUPDR_PUPDR0 << (position * 2));
+ temp |= ((GPIO_Init->Pull) << (position * 2));
+ GPIOx->PUPDR = temp;
+
+ /*--------------------- EXTI Mode Configuration ------------------------*/
+ /* Configure the External Interrupt or event for the current IO */
+ if((GPIO_Init->Mode & EXTI_MODE) == EXTI_MODE)
+ {
+ /* Enable SYSCFG Clock */
+ __SYSCFG_CLK_ENABLE();
+
+ temp = SYSCFG->EXTICR[position >> 2];
+ temp &= ~(((uint32_t)0x0F) << (4 * (position & 0x03)));
+ temp |= (GPIO_GET_INDEX(GPIOx) << (4 * (position & 0x03)));
+ SYSCFG->EXTICR[position >> 2] = temp;
+
+ /* Clear EXTI line configuration */
+ temp = EXTI->IMR;
+ temp &= ~((uint32_t)iocurrent);
+ if((GPIO_Init->Mode & GPIO_MODE_IT) == GPIO_MODE_IT)
+ {
+ temp |= iocurrent;
+ }
+ EXTI->IMR = temp;
+
+ temp = EXTI->EMR;
+ temp &= ~((uint32_t)iocurrent);
+ if((GPIO_Init->Mode & GPIO_MODE_EVT) == GPIO_MODE_EVT)
+ {
+ temp |= iocurrent;
+ }
+ EXTI->EMR = temp;
+
+ /* Clear Rising Falling edge configuration */
+ temp = EXTI->RTSR;
+ temp &= ~((uint32_t)iocurrent);
+ if((GPIO_Init->Mode & RISING_EDGE) == RISING_EDGE)
+ {
+ temp |= iocurrent;
+ }
+ EXTI->RTSR = temp;
+
+ temp = EXTI->FTSR;
+ temp &= ~((uint32_t)iocurrent);
+ if((GPIO_Init->Mode & FALLING_EDGE) == FALLING_EDGE)
+ {
+ temp |= iocurrent;
+ }
+ EXTI->FTSR = temp;
+ }
+ }
+
+ position++;
+ }
+}
+
+/**
+ * @brief De-initializes the GPIOx peripheral registers to their default reset values.
+ * @param GPIOx: where x can be (A..F) to select the GPIO peripheral for STM32F0 family
+ * @note GPIOD is only available on STM32F05xx, STM32F07xx and STM32F09xx
+ * @note GPIOE is only available on STM32F07xx and STM32F09xx
+ * @param GPIO_Pin: specifies the port bit to be written.
+ * This parameter can be one of GPIO_PIN_x where x can be (0..15).
+ * @retval None
+ */
+void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin)
+{
+ uint32_t position = 0x00;
+ uint32_t iocurrent = 0x00;
+ uint32_t tmp = 0x00;
+
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
+ assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+ /* Configure the port pins */
+ while (GPIO_Pin >> position)
+ {
+ /* Get current io position */
+ iocurrent = (GPIO_Pin) & (1 << position);
+
+ if (iocurrent)
+ {
+ /*------------------------- GPIO Mode Configuration --------------------*/
+ /* Configure IO Direction in Input Floting Mode */
+ GPIOx->MODER &= ~(GPIO_MODER_MODER0 << (position * 2));
+
+ /* Configure the default Alternate Function in current IO */
+ GPIOx->AFR[position >> 3] &= ~((uint32_t)0xF << ((uint32_t)(position & (uint32_t)0x07) * 4)) ;
+
+ /* Configure the default value for IO Speed */
+ GPIOx->OSPEEDR &= ~(GPIO_OSPEEDER_OSPEEDR0 << (position * 2));
+
+ /* Configure the default value IO Output Type */
+ GPIOx->OTYPER &= ~(GPIO_OTYPER_OT_0 << position) ;
+
+ /* Deactivate the Pull-up oand Pull-down resistor for the current IO */
+ GPIOx->PUPDR &= ~(GPIO_PUPDR_PUPDR0 << (position * 2));
+
+ /*------------------------- EXTI Mode Configuration --------------------*/
+ /* Clear the External Interrupt or Event for the current IO */
+
+ tmp = SYSCFG->EXTICR[position >> 2];
+ tmp &= (((uint32_t)0x0F) << (4 * (position & 0x03)));
+ if(tmp == (GPIO_GET_INDEX(GPIOx) << (4 * (position & 0x03))))
+ {
+ tmp = ((uint32_t)0x0F) << (4 * (position & 0x03));
+ SYSCFG->EXTICR[position >> 2] &= ~tmp;
+
+ /* Clear EXTI line configuration */
+ EXTI->IMR &= ~((uint32_t)iocurrent);
+ EXTI->EMR &= ~((uint32_t)iocurrent);
+
+ /* Clear Rising Falling edge configuration */
+ EXTI->RTSR &= ~((uint32_t)iocurrent);
+ EXTI->FTSR &= ~((uint32_t)iocurrent);
+ }
+ }
+
+ position++;
+ }
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_Exported_Functions_Group2 IO operation functions
+ * @brief GPIO Read, Write, Toggle, Lock and EXTI management functions.
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Reads the specified input port pin.
+ * @param GPIOx: where x can be (A..F) to select the GPIO peripheral for STM32F0 family
+ * @note GPIOD is only available on STM32F05xx, STM32F07xx and STM32F09xx
+ * @note GPIOE is only available on STM32F07xx and STM32F09xx
+ * @param GPIO_Pin: specifies the port bit to read.
+ * This parameter can be GPIO_PIN_x where x can be (0..15).
+ * @retval The input port pin value.
+ */
+GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+ GPIO_PinState bitstatus;
+
+ /* Check the parameters */
+ assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+ if ((GPIOx->IDR & GPIO_Pin) != (uint32_t)GPIO_PIN_RESET)
+ {
+ bitstatus = GPIO_PIN_SET;
+ }
+ else
+ {
+ bitstatus = GPIO_PIN_RESET;
+ }
+ return bitstatus;
+ }
+
+/**
+ * @brief Sets or clears the selected data port bit.
+ * @note This function uses GPIOx_BSRR register to allow atomic read/modify
+ * accesses. In this way, there is no risk of an IRQ occurring between
+ * the read and the modify access.
+ * @param GPIOx: where x can be (A..F) to select the GPIO peripheral for STM32F0 family
+ * @note GPIOD is only available on STM32F05xx, STM32F07xx and STM32F09xx
+ * @note GPIOE is only available on STM32F07xx and STM32F09xx
+ * @param GPIO_Pin: specifies the port bit to be written.
+ * This parameter can be one of GPIO_PIN_x where x can be (0..15).
+ * @param PinState: specifies the value to be written to the selected bit.
+ * This parameter can be one of the GPIO_PinState enum values:
+ * @arg GPIO_PIN_RESET: to clear the port pin
+ * @arg GPIO_PIN_SET: to set the port pin
+ * @retval None
+ */
+void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState)
+{
+ /* Check the parameters */
+ assert_param(IS_GPIO_PIN(GPIO_Pin));
+ assert_param(IS_GPIO_PIN_ACTION(PinState));
+
+ if (PinState != GPIO_PIN_RESET)
+ {
+ GPIOx->BSRR = (uint32_t)GPIO_Pin;
+ }
+ else
+ {
+ GPIOx->BSRR = (uint32_t)GPIO_Pin << 16 ;
+ }
+}
+
+/**
+ * @brief Toggles the specified GPIO pin
+ * @param GPIOx: where x can be (A..F) to select the GPIO peripheral for STM32F0 family
+ * @note GPIOD is only available on STM32F05xx, STM32F07xx and STM32F09xx
+ * @note GPIOE is only available on STM32F07xx and STM32F09xx
+ * @param GPIO_Pin: specifies the pins to be toggled.
+ * @retval None
+ */
+void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+ /* Check the parameters */
+ assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+ GPIOx->ODR ^= GPIO_Pin;
+}
+
+/**
+* @brief Locks GPIO Pins configuration registers.
+* @note The locked registers are GPIOx_MODER, GPIOx_OTYPER, GPIOx_OSPEEDR,
+* GPIOx_PUPDR, GPIOx_AFRL and GPIOx_AFRH.
+* @note The configuration of the locked GPIO pins can no longer be modified
+* until the next reset.
+* @param GPIOx: where x can be (A..F) to select the GPIO peripheral for STM32F0 family
+* @note GPIOD is only available on STM32F05xx, STM32F07xx and STM32F09xx
+* @note GPIOE is only available on STM32F07xx and STM32F09xx
+* @param GPIO_Pin: specifies the port bit to be locked.
+* This parameter can be any combination of GPIO_Pin_x where x can be (0..15).
+* @retval None
+*/
+HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+ __IO uint32_t tmp = GPIO_LCKR_LCKK;
+
+ /* Check the parameters */
+ assert_param(IS_GPIO_LOCK_INSTANCE(GPIOx));
+ assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+ /* Apply lock key write sequence */
+ tmp |= GPIO_Pin;
+ /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */
+ GPIOx->LCKR = tmp;
+ /* Reset LCKx bit(s): LCKK='0' + LCK[15-0] */
+ GPIOx->LCKR = GPIO_Pin;
+ /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */
+ GPIOx->LCKR = tmp;
+ /* Read LCKK bit*/
+ tmp = GPIOx->LCKR;
+
+ if((GPIOx->LCKR & GPIO_LCKR_LCKK) != RESET)
+ {
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief This function handles EXTI interrupt request.
+ * @param GPIO_Pin: Specifies the port pin connected to corresponding EXTI line.
+ * @retval None
+ */
+void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin)
+{
+ /* EXTI line interrupt detected */
+ if(__HAL_GPIO_EXTI_GET_IT(GPIO_Pin) != RESET)
+ {
+ __HAL_GPIO_EXTI_CLEAR_IT(GPIO_Pin);
+ HAL_GPIO_EXTI_Callback(GPIO_Pin);
+ }
+}
+
+/**
+ * @brief EXTI line detection callbacks.
+ * @param GPIO_Pin: Specifies the port pin connected to corresponding EXTI line.
+ * @retval None
+ */
+__weak void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_GPIO_EXTI_Callback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+#endif /* HAL_GPIO_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/src/stm32f0xx_hal_i2c.c b/f0/src/stm32f0xx_hal_i2c.c
new file mode 100755
index 0000000000000000000000000000000000000000..cbf90173b143ba3941e1e7bb9eff78bdfda6b45e
--- /dev/null
+++ b/f0/src/stm32f0xx_hal_i2c.c
@@ -0,0 +1,4101 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_i2c.c
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief I2C HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Inter Integrated Circuit (I2C) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral State functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The I2C HAL driver can be used as follows:
+
+ (#) Declare a I2C_HandleTypeDef handle structure, for example:
+ I2C_HandleTypeDef hi2c;
+
+ (#)Initialize the I2C low level resources by implement the HAL_I2C_MspInit ()API:
+ (++) Enable the I2Cx interface clock
+ (++) I2C pins configuration
+ (+++) Enable the clock for the I2C GPIOs
+ (+++) Configure I2C pins as alternate function open-drain
+ (++) NVIC configuration if you need to use interrupt process
+ (+++) Configure the I2Cx interrupt priority
+ (+++) Enable the NVIC I2C IRQ Channel
+ (++) DMA Configuration if you need to use DMA process
+ (+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive channel
+ (+++) Enable the DMAx interface clock using
+ (+++) Configure the DMA handle parameters
+ (+++) Configure the DMA Tx or Rx channel
+ (+++) Associate the initilalized DMA handle to the hi2c DMA Tx or Rx handle
+ (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx or Rx channel
+
+ (#) Configure the Communication Clock Timing, Own Address1, Master Adressing Mode, Dual Addressing mode,
+ Own Address2, Own Address2 Mask, General call and Nostretch mode in the hi2c Init structure.
+
+ (#) Initialize the I2C registers by calling the HAL_I2C_Init() API:
+ (++) These API s configures also the low level Hardware GPIO, CLOCK, CORTEX...etc)
+ by calling the customed HAL_I2C_MspInit(&hi2c) API.
+
+ (#) To check if target device is ready for communication, use the function HAL_I2C_IsDeviceReady()
+
+ (#) For I2C IO and IO MEM operations, three modes of operations are available within this driver :
+
+ *** Polling mode IO operation ***
+ =================================
+ [..]
+ (+) Transmit in master mode an amount of data in blocking mode using HAL_I2C_Master_Transmit()
+ (+) Receive in master mode an amount of data in blocking mode using HAL_I2C_Master_Receive()
+ (+) Transmit in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Transmit()
+ (+) Receive in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Receive()
+
+ *** Polling mode IO MEM operation ***
+ =====================================
+ [..]
+ (+) Write an amount of data in blocking mode to a specific memory address using HAL_I2C_Mem_Write()
+ (+) Read an amount of data in blocking mode from a specific memory address using HAL_I2C_Mem_Read()
+
+
+ *** Interrupt mode IO operation ***
+ ===================================
+ [..]
+ (+) Transmit in master mode an amount of data in non blocking mode using HAL_I2C_Master_Transmit_IT()
+ (+) At transmission end of transfer HAL_I2C_MasterTxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MasterTxCpltCallback
+ (+) Receive in master mode an amount of data in non blocking mode using HAL_I2C_Master_Receive_IT()
+ (+) At reception end of transfer HAL_I2C_MasterRxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MasterRxCpltCallback
+ (+) Transmit in slave mode an amount of data in non blocking mode using HAL_I2C_Slave_Transmit_IT()
+ (+) At transmission end of transfer HAL_I2C_SlaveTxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback
+ (+) Receive in slave mode an amount of data in non blocking mode using HAL_I2C_Slave_Receive_IT()
+ (+) At reception end of transfer HAL_I2C_SlaveRxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback
+ (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_I2C_ErrorCallback
+
+ *** Interrupt mode IO MEM operation ***
+ =======================================
+ [..]
+ (+) Write an amount of data in no-blocking mode with Interrupt to a specific memory address using
+ HAL_I2C_Mem_Write_IT()
+ (+) At MEM end of write transfer HAL_I2C_MemTxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MemTxCpltCallback
+ (+) Read an amount of data in no-blocking mode with Interrupt from a specific memory address using
+ HAL_I2C_Mem_Read_IT()
+ (+) At MEM end of read transfer HAL_I2C_MemRxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MemRxCpltCallback
+ (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_I2C_ErrorCallback
+
+ *** DMA mode IO operation ***
+ ==============================
+ [..]
+ (+) Transmit in master mode an amount of data in non blocking mode (DMA) using
+ HAL_I2C_Master_Transmit_DMA()
+ (+) At transmission end of transfer HAL_I2C_MasterTxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MasterTxCpltCallback
+ (+) Receive in master mode an amount of data in non blocking mode (DMA) using
+ HAL_I2C_Master_Receive_DMA()
+ (+) At reception end of transfer HAL_I2C_MasterRxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MasterRxCpltCallback
+ (+) Transmit in slave mode an amount of data in non blocking mode (DMA) using
+ HAL_I2C_Slave_Transmit_DMA()
+ (+) At transmission end of transfer HAL_I2C_SlaveTxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback
+ (+) Receive in slave mode an amount of data in non blocking mode (DMA) using
+ HAL_I2C_Slave_Receive_DMA()
+ (+) At reception end of transfer HAL_I2C_SlaveRxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback
+ (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_I2C_ErrorCallback
+
+ *** DMA mode IO MEM operation ***
+ =================================
+ [..]
+ (+) Write an amount of data in no-blocking mode with DMA to a specific memory address using
+ HAL_I2C_Mem_Write_DMA()
+ (+) At MEM end of write transfer HAL_I2C_MemTxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MemTxCpltCallback
+ (+) Read an amount of data in no-blocking mode with DMA from a specific memory address using
+ HAL_I2C_Mem_Read_DMA()
+ (+) At MEM end of read transfer HAL_I2C_MemRxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MemRxCpltCallback
+ (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_I2C_ErrorCallback
+
+
+ *** I2C HAL driver macros list ***
+ ==================================
+ [..]
+ Below the list of most used macros in I2C HAL driver.
+
+ (+) __HAL_I2C_ENABLE: Enable the I2C peripheral
+ (+) __HAL_I2C_DISABLE: Disable the I2C peripheral
+ (+) __HAL_I2C_GET_FLAG : Checks whether the specified I2C flag is set or not
+ (+) __HAL_I2C_CLEAR_FLAG : Clears the specified I2C pending flag
+ (+) __HAL_I2C_ENABLE_IT: Enables the specified I2C interrupt
+ (+) __HAL_I2C_DISABLE_IT: Disables the specified I2C interrupt
+
+ [..]
+ (@) You can refer to the I2C HAL driver header file for more useful macros
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup I2C I2C HAL module driver
+ * @brief I2C HAL module driver
+ * @{
+ */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+
+/** @defgroup I2C_Private_Define I2C Private Define
+ * @{
+ */
+#define TIMING_CLEAR_MASK ((uint32_t)0xF0FFFFFF) /*<! I2C TIMING clear register Mask */
+#define I2C_TIMEOUT_ADDR ((uint32_t)10000) /* 10 s */
+#define I2C_TIMEOUT_BUSY ((uint32_t)25) /* 25 ms */
+#define I2C_TIMEOUT_DIR ((uint32_t)25) /* 25 ms */
+#define I2C_TIMEOUT_RXNE ((uint32_t)25) /* 25 ms */
+#define I2C_TIMEOUT_STOPF ((uint32_t)25) /* 25 ms */
+#define I2C_TIMEOUT_TC ((uint32_t)25) /* 25 ms */
+#define I2C_TIMEOUT_TCR ((uint32_t)25) /* 25 ms */
+#define I2C_TIMEOUT_TXIS ((uint32_t)25) /* 25 ms */
+#define I2C_TIMEOUT_FLAG ((uint32_t)25) /* 25 ms */
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+
+/** @defgroup I2C_Private_Functions I2C Private Functions
+ * @{
+ */
+static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma);
+static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma);
+static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma);
+static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma);
+static void I2C_DMAMemTransmitCplt(DMA_HandleTypeDef *hdma);
+static void I2C_DMAMemReceiveCplt(DMA_HandleTypeDef *hdma);
+static void I2C_DMAError(DMA_HandleTypeDef *hdma);
+
+static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout);
+static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout);
+static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, uint32_t Timeout);
+static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout);
+static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout);
+static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout);
+static HAL_StatusTypeDef I2C_IsAcknowledgeFailed(I2C_HandleTypeDef *hi2c, uint32_t Timeout);
+
+static HAL_StatusTypeDef I2C_MasterTransmit_ISR(I2C_HandleTypeDef *hi2c);
+static HAL_StatusTypeDef I2C_MasterReceive_ISR(I2C_HandleTypeDef *hi2c);
+
+static HAL_StatusTypeDef I2C_SlaveTransmit_ISR(I2C_HandleTypeDef *hi2c);
+static HAL_StatusTypeDef I2C_SlaveReceive_ISR(I2C_HandleTypeDef *hi2c);
+
+static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, uint32_t Request);
+/**
+ * @}
+ */
+
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup I2C_Exported_Functions I2C Exported Functions
+ * @{
+ */
+
+/** @defgroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and Configuration functions #####
+ ===============================================================================
+ [..] This subsection provides a set of functions allowing to initialize and
+ de-initialiaze the I2Cx peripheral:
+
+ (+) User must Implement HAL_I2C_MspInit() function in which he configures
+ all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ).
+
+ (+) Call the function HAL_I2C_Init() to configure the selected device with
+ the selected configuration:
+ (++) Clock Timing
+ (++) Own Address 1
+ (++) Addressing mode (Master, Slave)
+ (++) Dual Addressing mode
+ (++) Own Address 2
+ (++) Own Address 2 Mask
+ (++) General call mode
+ (++) Nostretch mode
+
+ (+) Call the function HAL_I2C_DeInit() to restore the default configuration
+ of the selected I2Cx periperal.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the I2C according to the specified parameters
+ * in the I2C_InitTypeDef and create the associated handle.
+ * @param hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c)
+{
+ /* Check the I2C handle allocation */
+ if(hi2c == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+ assert_param(IS_I2C_OWN_ADDRESS1(hi2c->Init.OwnAddress1));
+ assert_param(IS_I2C_ADDRESSING_MODE(hi2c->Init.AddressingMode));
+ assert_param(IS_I2C_DUAL_ADDRESS(hi2c->Init.DualAddressMode));
+ assert_param(IS_I2C_OWN_ADDRESS2(hi2c->Init.OwnAddress2));
+ assert_param(IS_I2C_OWN_ADDRESS2_MASK(hi2c->Init.OwnAddress2Masks));
+ assert_param(IS_I2C_GENERAL_CALL(hi2c->Init.GeneralCallMode));
+ assert_param(IS_I2C_NO_STRETCH(hi2c->Init.NoStretchMode));
+
+ if(hi2c->State == HAL_I2C_STATE_RESET)
+ {
+ /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */
+ HAL_I2C_MspInit(hi2c);
+ }
+
+ hi2c->State = HAL_I2C_STATE_BUSY;
+
+ /* Disable the selected I2C peripheral */
+ __HAL_I2C_DISABLE(hi2c);
+
+ /*---------------------------- I2Cx TIMINGR Configuration ------------------*/
+ /* Configure I2Cx: Frequency range */
+ hi2c->Instance->TIMINGR = hi2c->Init.Timing & TIMING_CLEAR_MASK;
+
+ /*---------------------------- I2Cx OAR1 Configuration ---------------------*/
+ /* Configure I2Cx: Own Address1 and ack own address1 mode */
+ hi2c->Instance->OAR1 &= ~I2C_OAR1_OA1EN;
+ if(hi2c->Init.OwnAddress1 != 0)
+ {
+ if(hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT)
+ {
+ hi2c->Instance->OAR1 = (I2C_OAR1_OA1EN | hi2c->Init.OwnAddress1);
+ }
+ else /* I2C_ADDRESSINGMODE_10BIT */
+ {
+ hi2c->Instance->OAR1 = (I2C_OAR1_OA1EN | I2C_OAR1_OA1MODE | hi2c->Init.OwnAddress1);
+ }
+ }
+
+ /*---------------------------- I2Cx CR2 Configuration ----------------------*/
+ /* Configure I2Cx: Addressing Master mode */
+ if(hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT)
+ {
+ hi2c->Instance->CR2 = (I2C_CR2_ADD10);
+ }
+ /* Enable the AUTOEND by default, and enable NACK (should be disable only during Slave process */
+ hi2c->Instance->CR2 |= (I2C_CR2_AUTOEND | I2C_CR2_NACK);
+
+ /*---------------------------- I2Cx OAR2 Configuration ---------------------*/
+ /* Configure I2Cx: Dual mode and Own Address2 */
+ hi2c->Instance->OAR2 = (hi2c->Init.DualAddressMode | hi2c->Init.OwnAddress2 | (hi2c->Init.OwnAddress2Masks << 8));
+
+ /*---------------------------- I2Cx CR1 Configuration ----------------------*/
+ /* Configure I2Cx: Generalcall and NoStretch mode */
+ hi2c->Instance->CR1 = (hi2c->Init.GeneralCallMode | hi2c->Init.NoStretchMode);
+
+ /* Enable the selected I2C peripheral */
+ __HAL_I2C_ENABLE(hi2c);
+
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the I2C peripheral.
+ * @param hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c)
+{
+ /* Check the I2C handle allocation */
+ if(hi2c == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+
+ hi2c->State = HAL_I2C_STATE_BUSY;
+
+ /* Disable the I2C Peripheral Clock */
+ __HAL_I2C_DISABLE(hi2c);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+ HAL_I2C_MspDeInit(hi2c);
+
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+ hi2c->State = HAL_I2C_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief I2C MSP Init.
+ * @param hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+ __weak void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_I2C_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief I2C MSP DeInit
+ * @param hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+ __weak void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_I2C_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Exported_Functions_Group2 Input and Output operation functions
+ * @brief Data transfers functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the I2C data
+ transfers.
+
+ (#) There is two mode of transfer:
+ (++) Blocking mode : The communication is performed in the polling mode.
+ The status of all data processing is returned by the same function
+ after finishing transfer.
+ (++) No-Blocking mode : The communication is performed using Interrupts
+ or DMA. These functions return the status of the transfer startup.
+ The end of the data processing will be indicated through the
+ dedicated I2C IRQ when using Interrupt mode or the DMA IRQ when
+ using DMA mode.
+
+ (#) Blocking mode functions are :
+ (++) HAL_I2C_Master_Transmit()
+ (++) HAL_I2C_Master_Receive()
+ (++) HAL_I2C_Slave_Transmit()
+ (++) HAL_I2C_Slave_Receive()
+ (++) HAL_I2C_Mem_Write()
+ (++) HAL_I2C_Mem_Read()
+ (++) HAL_I2C_IsDeviceReady()
+
+ (#) No-Blocking mode functions with Interrupt are :
+ (++) HAL_I2C_Master_Transmit_IT()
+ (++) HAL_I2C_Master_Receive_IT()
+ (++) HAL_I2C_Slave_Transmit_IT()
+ (++) HAL_I2C_Slave_Receive_IT()
+ (++) HAL_I2C_Mem_Write_IT()
+ (++) HAL_I2C_Mem_Read_IT()
+
+ (#) No-Blocking mode functions with DMA are :
+ (++) HAL_I2C_Master_Transmit_DMA()
+ (++) HAL_I2C_Master_Receive_DMA()
+ (++) HAL_I2C_Slave_Transmit_DMA()
+ (++) HAL_I2C_Slave_Receive_DMA()
+ (++) HAL_I2C_Mem_Write_DMA()
+ (++) HAL_I2C_Mem_Read_DMA()
+
+ (#) A set of Transfer Complete Callbacks are provided in No_Blocking mode:
+ (++) HAL_I2C_MemTxCpltCallback()
+ (++) HAL_I2C_MemRxCpltCallback()
+ (++) HAL_I2C_MasterTxCpltCallback()
+ (++) HAL_I2C_MasterRxCpltCallback()
+ (++) HAL_I2C_SlaveTxCpltCallback()
+ (++) HAL_I2C_SlaveRxCpltCallback()
+ (++) HAL_I2C_ErrorCallback()
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Transmits in master mode an amount of data in blocking mode.
+ * @param hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress: Target device address
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be sent
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t sizetmp = 0;
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if((pData == NULL ) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_MASTER_BUSY_TX;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if size > 255 and generate RESTART */
+ /* Size > 255, need to set RELOAD bit */
+ if(Size > 255)
+ {
+ I2C_TransferConfig(hi2c,DevAddress,255, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE);
+ sizetmp = 255;
+ }
+ else
+ {
+ I2C_TransferConfig(hi2c,DevAddress,Size, I2C_AUTOEND_MODE, I2C_GENERATE_START_WRITE);
+ sizetmp = Size;
+ }
+
+ do
+ {
+ /* Wait until TXIS flag is set */
+ if(I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ /* Write data to TXDR */
+ hi2c->Instance->TXDR = (*pData++);
+ sizetmp--;
+ Size--;
+
+ if((sizetmp == 0)&&(Size!=0))
+ {
+ /* Wait until TXE flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ if(Size > 255)
+ {
+ I2C_TransferConfig(hi2c,DevAddress,255, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+ sizetmp = 255;
+ }
+ else
+ {
+ I2C_TransferConfig(hi2c,DevAddress,Size, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+ sizetmp = Size;
+ }
+ }
+
+ }while(Size > 0);
+
+ /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+ /* Wait until STOPF flag is set */
+ if(I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ __HAL_I2C_RESET_CR2(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receives in master mode an amount of data in blocking mode.
+ * @param hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress: Target device address
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be sent
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t sizetmp = 0;
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if((pData == NULL ) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_MASTER_BUSY_RX;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if size > 255 and generate RESTART */
+ /* Size > 255, need to set RELOAD bit */
+ if(Size > 255)
+ {
+ I2C_TransferConfig(hi2c,DevAddress,255, I2C_RELOAD_MODE, I2C_GENERATE_START_READ);
+ sizetmp = 255;
+ }
+ else
+ {
+ I2C_TransferConfig(hi2c,DevAddress,Size, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ);
+ sizetmp = Size;
+ }
+
+ do
+ {
+ /* Wait until RXNE flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Write data to RXDR */
+ (*pData++) =hi2c->Instance->RXDR;
+ sizetmp--;
+ Size--;
+
+ if((sizetmp == 0)&&(Size!=0))
+ {
+ /* Wait until TCR flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ if(Size > 255)
+ {
+ I2C_TransferConfig(hi2c,DevAddress,255, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+ sizetmp = 255;
+ }
+ else
+ {
+ I2C_TransferConfig(hi2c,DevAddress,Size, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+ sizetmp = Size;
+ }
+ }
+
+ }while(Size > 0);
+
+ /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+ /* Wait until STOPF flag is set */
+ if(I2C_WaitOnSTOPFlagUntilTimeout(hi2c, I2C_TIMEOUT_STOPF) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ __HAL_I2C_RESET_CR2(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmits in slave mode an amount of data in blocking mode.
+ * @param hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be sent
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if((pData == NULL ) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_SLAVE_BUSY_RX;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+
+ /* Wait until ADDR flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c,I2C_FLAG_ADDR);
+
+ /* If 10bit addressing mode is selected */
+ if(hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT)
+ {
+ /* Wait until ADDR flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c,I2C_FLAG_ADDR);
+ }
+
+ /* Wait until DIR flag is set Transmitter mode */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, RESET, Timeout) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ do
+ {
+ /* Wait until TXIS flag is set */
+ if(I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Read data from TXDR */
+ hi2c->Instance->TXDR = (*pData++);
+ Size--;
+ }while(Size > 0);
+
+ /* Wait until STOP flag is set */
+ if(I2C_WaitOnSTOPFlagUntilTimeout(hi2c, I2C_TIMEOUT_STOPF) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Normal use case for Transmitter mode */
+ /* A NACK is generated to confirm the end of transfer */
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c,I2C_FLAG_STOPF);
+
+ /* Wait until BUSY flag is reset */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, Timeout) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive in slave mode an amount of data in blocking mode
+ * @param hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be sent
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if((pData == NULL ) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_SLAVE_BUSY_RX;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+
+ /* Wait until ADDR flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c,I2C_FLAG_ADDR);
+
+ /* Wait until DIR flag is reset Receiver mode */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, SET, Timeout) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ while(Size > 0)
+ {
+ /* Wait until RXNE flag is set */
+ if(I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_TIMEOUT)
+ {
+ return HAL_TIMEOUT;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ /* Read data from RXDR */
+ (*pData++) = hi2c->Instance->RXDR;
+ Size--;
+ }
+
+ /* Wait until STOP flag is set */
+ if(I2C_WaitOnSTOPFlagUntilTimeout(hi2c, I2C_TIMEOUT_STOPF) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c,I2C_FLAG_STOPF);
+
+ /* Wait until BUSY flag is reset */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, Timeout) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmit in master mode an amount of data in no-blocking mode with Interrupt
+ * @param hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress: Target device address
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+{
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_MASTER_BUSY_TX;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ if(Size > 255)
+ {
+ hi2c->XferSize = 255;
+ }
+ else
+ {
+ hi2c->XferSize = Size;
+ }
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if size > 255 and generate RESTART */
+ if( (hi2c->XferSize == 255) && (hi2c->XferSize < hi2c->XferCount) )
+ {
+ I2C_TransferConfig(hi2c,DevAddress,hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE);
+ }
+ else
+ {
+ I2C_TransferConfig(hi2c,DevAddress,hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_WRITE);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+
+
+ /* Enable ERR, TC, STOP, NACK, TXI interrupt */
+ /* possible to enable all of these */
+ /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+ __HAL_I2C_ENABLE_IT(hi2c,I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_TXI );
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive in master mode an amount of data in no-blocking mode with Interrupt
+ * @param hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress: Target device address
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+{
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_MASTER_BUSY_RX;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ if(Size > 255)
+ {
+ hi2c->XferSize = 255;
+ }
+ else
+ {
+ hi2c->XferSize = Size;
+ }
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if size > 255 and generate RESTART */
+ if( (hi2c->XferSize == 255) && (hi2c->XferSize < hi2c->XferCount) )
+ {
+ I2C_TransferConfig(hi2c,DevAddress,hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_READ);
+ }
+ else
+ {
+ I2C_TransferConfig(hi2c,DevAddress,hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable ERR, TC, STOP, NACK, RXI interrupt */
+ /* possible to enable all of these */
+ /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+ __HAL_I2C_ENABLE_IT(hi2c,I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_RXI );
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmit in slave mode an amount of data in no-blocking mode with Interrupt
+ * @param hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size)
+{
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_SLAVE_BUSY_TX;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+
+ hi2c->pBuffPtr = pData;
+ hi2c->XferSize = Size;
+ hi2c->XferCount = Size;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable ERR, TC, STOP, NACK, TXI interrupt */
+ /* possible to enable all of these */
+ /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+ __HAL_I2C_ENABLE_IT(hi2c,I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_TXI );
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive in slave mode an amount of data in no-blocking mode with Interrupt
+ * @param hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size)
+{
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_SLAVE_BUSY_RX;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+
+ hi2c->pBuffPtr = pData;
+ hi2c->XferSize = Size;
+ hi2c->XferCount = Size;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable ERR, TC, STOP, NACK, RXI interrupt */
+ /* possible to enable all of these */
+ /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+ __HAL_I2C_ENABLE_IT(hi2c,I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmit in master mode an amount of data in no-blocking mode with DMA
+ * @param hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress: Target device address
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+{
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_MASTER_BUSY_TX;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ if(Size > 255)
+ {
+ hi2c->XferSize = 255;
+ }
+ else
+ {
+ hi2c->XferSize = Size;
+ }
+
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt;
+
+ /* Set the DMA error callback */
+ hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize);
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if size > 255 and generate RESTART */
+ if( (hi2c->XferSize == 255) && (hi2c->XferSize < hi2c->XferCount) )
+ {
+ I2C_TransferConfig(hi2c,DevAddress,hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE);
+ }
+ else
+ {
+ I2C_TransferConfig(hi2c,DevAddress,hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_WRITE);
+ }
+
+ /* Wait until TXIS flag is set */
+ if(I2C_WaitOnTXISFlagUntilTimeout(hi2c, I2C_TIMEOUT_TXIS) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+
+ /* Enable DMA Request */
+ hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive in master mode an amount of data in no-blocking mode with DMA
+ * @param hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress: Target device address
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+{
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_MASTER_BUSY_RX;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ if(Size > 255)
+ {
+ hi2c->XferSize = 255;
+ }
+ else
+ {
+ hi2c->XferSize = Size;
+ }
+
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt;
+
+ /* Set the DMA error callback */
+ hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize);
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if size > 255 and generate RESTART */
+ if( (hi2c->XferSize == 255) && (hi2c->XferSize < hi2c->XferCount) )
+ {
+ I2C_TransferConfig(hi2c,DevAddress,hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_READ);
+ }
+ else
+ {
+ I2C_TransferConfig(hi2c,DevAddress,hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ);
+ }
+
+ /* Wait until RXNE flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, I2C_TIMEOUT_RXNE) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+
+ /* Enable DMA Request */
+ hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmit in slave mode an amount of data in no-blocking mode with DMA
+ * @param hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size)
+{
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_SLAVE_BUSY_TX;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferSize = Size;
+
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmatx->XferCpltCallback = I2C_DMASlaveTransmitCplt;
+
+ /* Set the DMA error callback */
+ hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize);
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+
+ /* Wait until ADDR flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, I2C_TIMEOUT_ADDR) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c,I2C_FLAG_ADDR);
+
+ /* If 10bits addressing mode is selected */
+ if(hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT)
+ {
+ /* Wait until ADDR flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, I2C_TIMEOUT_ADDR) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c,I2C_FLAG_ADDR);
+ }
+
+ /* Wait until DIR flag is set Transmitter mode */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, RESET, I2C_TIMEOUT_BUSY) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ /* Enable DMA Request */
+ hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive in slave mode an amount of data in no-blocking mode with DMA
+ * @param hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size)
+{
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_SLAVE_BUSY_RX;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ hi2c->pBuffPtr = pData;
+ hi2c->XferSize = Size;
+ hi2c->XferCount = Size;
+
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmarx->XferCpltCallback = I2C_DMASlaveReceiveCplt;
+
+ /* Set the DMA error callback */
+ hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, Size);
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+
+ /* Wait until ADDR flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, I2C_TIMEOUT_ADDR) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c,I2C_FLAG_ADDR);
+
+ /* Wait until DIR flag is set Receiver mode */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, SET, I2C_TIMEOUT_DIR) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ /* Enable DMA Request */
+ hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Write an amount of data in blocking mode to a specific memory address
+ * @param hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress: Target device address
+ * @param MemAddress: Internal memory address
+ * @param MemAddSize: Size of internal memory address
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be sent
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t Sizetmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_MEM_BUSY_TX;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Send Slave Address and Memory Address */
+ if(I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, Timeout) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set NBYTES to write and reload if size > 255 */
+ /* Size > 255, need to set RELOAD bit */
+ if(Size > 255)
+ {
+ I2C_TransferConfig(hi2c,DevAddress,255, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+ Sizetmp = 255;
+ }
+ else
+ {
+ I2C_TransferConfig(hi2c,DevAddress,Size, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+ Sizetmp = Size;
+ }
+
+ do
+ {
+ /* Wait until TXIS flag is set */
+ if(I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Write data to DR */
+ hi2c->Instance->TXDR = (*pData++);
+ Sizetmp--;
+ Size--;
+
+ if((Sizetmp == 0)&&(Size!=0))
+ {
+ /* Wait until TCR flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+
+ if(Size > 255)
+ {
+ I2C_TransferConfig(hi2c,DevAddress,255, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+ Sizetmp = 255;
+ }
+ else
+ {
+ I2C_TransferConfig(hi2c,DevAddress,Size, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+ Sizetmp = Size;
+ }
+ }
+
+ }while(Size > 0);
+
+ /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+ /* Wait until STOPF flag is reset */
+ if(I2C_WaitOnSTOPFlagUntilTimeout(hi2c, I2C_TIMEOUT_STOPF) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ __HAL_I2C_RESET_CR2(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Read an amount of data in blocking mode from a specific memory address
+ * @param hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress: Target device address
+ * @param MemAddress: Internal memory address
+ * @param MemAddSize: Size of internal memory address
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be sent
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t Sizetmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_MEM_BUSY_RX;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Send Slave Address and Memory Address */
+ if(I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, Timeout) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if size > 255 and generate RESTART */
+ /* Size > 255, need to set RELOAD bit */
+ if(Size > 255)
+ {
+ I2C_TransferConfig(hi2c,DevAddress,255, I2C_RELOAD_MODE, I2C_GENERATE_START_READ);
+ Sizetmp = 255;
+ }
+ else
+ {
+ I2C_TransferConfig(hi2c,DevAddress,Size, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ);
+ Sizetmp = Size;
+ }
+
+ do
+ {
+ /* Wait until RXNE flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Read data from RXDR */
+ (*pData++) = hi2c->Instance->RXDR;
+
+ /* Decrement the Size counter */
+ Sizetmp--;
+ Size--;
+
+ if((Sizetmp == 0)&&(Size!=0))
+ {
+ /* Wait until TCR flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ if(Size > 255)
+ {
+ I2C_TransferConfig(hi2c,DevAddress,255, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+ Sizetmp = 255;
+ }
+ else
+ {
+ I2C_TransferConfig(hi2c,DevAddress,Size, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+ Sizetmp = Size;
+ }
+ }
+
+ }while(Size > 0);
+
+ /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+ /* Wait until STOPF flag is reset */
+ if(I2C_WaitOnSTOPFlagUntilTimeout(hi2c, I2C_TIMEOUT_STOPF) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ __HAL_I2C_RESET_CR2(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Write an amount of data in no-blocking mode with Interrupt to a specific memory address
+ * @param hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress: Target device address
+ * @param MemAddress: Internal memory address
+ * @param MemAddSize: Size of internal memory address
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_MEM_BUSY_TX;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ if(Size > 255)
+ {
+ hi2c->XferSize = 255;
+ }
+ else
+ {
+ hi2c->XferSize = Size;
+ }
+
+ /* Send Slave Address and Memory Address */
+ if(I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set NBYTES to write and reload if size > 255 */
+ /* Size > 255, need to set RELOAD bit */
+ if( (hi2c->XferSize == 255) && (hi2c->XferSize < hi2c->XferCount) )
+ {
+ I2C_TransferConfig(hi2c,DevAddress,hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+ }
+ else
+ {
+ I2C_TransferConfig(hi2c,DevAddress,hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable ERR, TC, STOP, NACK, TXI interrupt */
+ /* possible to enable all of these */
+ /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+ __HAL_I2C_ENABLE_IT(hi2c,I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_TXI );
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Read an amount of data in no-blocking mode with Interrupt from a specific memory address
+ * @param hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress: Target device address
+ * @param MemAddress: Internal memory address
+ * @param MemAddSize: Size of internal memory address
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_MEM_BUSY_RX;
+
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ if(Size > 255)
+ {
+ hi2c->XferSize = 255;
+ }
+ else
+ {
+ hi2c->XferSize = Size;
+ }
+
+ /* Send Slave Address and Memory Address */
+ if(I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set NBYTES to write and reload if size > 255 and generate RESTART */
+ /* Size > 255, need to set RELOAD bit */
+ if( (hi2c->XferSize == 255) && (hi2c->XferSize < hi2c->XferCount) )
+ {
+ I2C_TransferConfig(hi2c,DevAddress,hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_READ);
+ }
+ else
+ {
+ I2C_TransferConfig(hi2c,DevAddress,hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable ERR, TC, STOP, NACK, RXI interrupt */
+ /* possible to enable all of these */
+ /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+ __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_RXI );
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Write an amount of data in no-blocking mode with DMA to a specific memory address
+ * @param hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress: Target device address
+ * @param MemAddress: Internal memory address
+ * @param MemAddSize: Size of internal memory address
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_MEM_BUSY_TX;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ if(Size > 255)
+ {
+ hi2c->XferSize = 255;
+ }
+ else
+ {
+ hi2c->XferSize = Size;
+ }
+
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmatx->XferCpltCallback = I2C_DMAMemTransmitCplt;
+
+ /* Set the DMA error callback */
+ hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize);
+
+ /* Send Slave Address and Memory Address */
+ if(I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if size > 255 */
+ if( (hi2c->XferSize == 255) && (hi2c->XferSize < hi2c->XferCount) )
+ {
+ I2C_TransferConfig(hi2c,DevAddress,hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+ }
+ else
+ {
+ I2C_TransferConfig(hi2c,DevAddress,hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+ }
+
+ /* Wait until TXIS flag is set */
+ if(I2C_WaitOnTXISFlagUntilTimeout(hi2c, I2C_TIMEOUT_TXIS) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Enable DMA Request */
+ hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Reads an amount of data in no-blocking mode with DMA from a specific memory address.
+ * @param hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress: Target device address
+ * @param MemAddress: Internal memory address
+ * @param MemAddSize: Size of internal memory address
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be read
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_MEM_BUSY_RX;
+
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ if(Size > 255)
+ {
+ hi2c->XferSize = 255;
+ }
+ else
+ {
+ hi2c->XferSize = Size;
+ }
+
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmarx->XferCpltCallback = I2C_DMAMemReceiveCplt;
+
+ /* Set the DMA error callback */
+ hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize);
+
+ /* Send Slave Address and Memory Address */
+ if(I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set NBYTES to write and reload if size > 255 and generate RESTART */
+ if( (hi2c->XferSize == 255) && (hi2c->XferSize < hi2c->XferCount) )
+ {
+ I2C_TransferConfig(hi2c,DevAddress,hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_READ);
+ }
+ else
+ {
+ I2C_TransferConfig(hi2c,DevAddress,hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ);
+ }
+
+ /* Wait until RXNE flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, I2C_TIMEOUT_RXNE) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Enable DMA Request */
+ hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Checks if target device is ready for communication.
+ * @note This function is used with Memory devices
+ * @param hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress: Target device address
+ * @param Trials: Number of trials
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout)
+{
+ uint32_t tickstart = 0;
+
+ __IO uint32_t I2C_Trials = 0;
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ do
+ {
+ /* Generate Start */
+ hi2c->Instance->CR2 = __HAL_I2C_GENERATE_START(hi2c->Init.AddressingMode,DevAddress);
+
+ /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+ /* Wait until STOPF flag is set or a NACK flag is set*/
+ tickstart = HAL_GetTick();
+ while((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) && (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == RESET) && (hi2c->State != HAL_I2C_STATE_TIMEOUT))
+ {
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0) || ((HAL_GetTick() - tickstart) > Timeout))
+ {
+ /* Device is ready */
+ hi2c->State = HAL_I2C_STATE_READY;
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Check if the NACKF flag has not been set */
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == RESET)
+ {
+ /* Wait until STOPF flag is reset */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Device is ready */
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ /* Wait until STOPF flag is reset */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear NACK Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Clear STOP Flag, auto generated with autoend*/
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+ }
+
+ /* Check if the maximum allowed number of trials has been reached */
+ if (I2C_Trials++ == Trials)
+ {
+ /* Generate Stop */
+ hi2c->Instance->CR2 |= I2C_CR2_STOP;
+
+ /* Wait until STOPF flag is reset */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+ }
+ }while(I2C_Trials < Trials);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief This function handles I2C event interrupt request.
+ * @param hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c)
+{
+ /* I2C in mode Transmitter ---------------------------------------------------*/
+ if (((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) == SET) || (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TCR) == SET) || (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TC) == SET) || (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET) || (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET) || (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR) == SET)) && (__HAL_I2C_GET_IT_SOURCE(hi2c, (I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_TXI | I2C_IT_ADDRI)) == SET))
+ {
+ /* Slave mode selected */
+ if (hi2c->State == HAL_I2C_STATE_SLAVE_BUSY_TX)
+ {
+ I2C_SlaveTransmit_ISR(hi2c);
+ }
+ }
+
+ if (((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) == SET) || (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TCR) == SET) || (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TC) == SET) || (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET) || (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET)) && (__HAL_I2C_GET_IT_SOURCE(hi2c, (I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_TXI)) == SET))
+ {
+ /* Master mode selected */
+ if ((hi2c->State == HAL_I2C_STATE_MASTER_BUSY_TX) || (hi2c->State == HAL_I2C_STATE_MEM_BUSY_TX))
+ {
+ I2C_MasterTransmit_ISR(hi2c);
+ }
+ }
+
+ /* I2C in mode Receiver ----------------------------------------------------*/
+ if (((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) || (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TCR) == SET) || (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TC) == SET) || (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET) || (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET) || (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR) == SET)) && (__HAL_I2C_GET_IT_SOURCE(hi2c, (I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_RXI | I2C_IT_ADDRI)) == SET))
+ {
+ /* Slave mode selected */
+ if (hi2c->State == HAL_I2C_STATE_SLAVE_BUSY_RX)
+ {
+ I2C_SlaveReceive_ISR(hi2c);
+ }
+ }
+ if (((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) || (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TCR) == SET) || (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TC) == SET) || (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET) || (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET)) && (__HAL_I2C_GET_IT_SOURCE(hi2c, (I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_RXI)) == SET))
+ {
+ /* Master mode selected */
+ if ((hi2c->State == HAL_I2C_STATE_MASTER_BUSY_RX) || (hi2c->State == HAL_I2C_STATE_MEM_BUSY_RX))
+ {
+ I2C_MasterReceive_ISR(hi2c);
+ }
+ }
+}
+
+/**
+ * @brief This function handles I2C error interrupt request.
+ * @param hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c)
+{
+ /* I2C Bus error interrupt occurred ------------------------------------*/
+ if((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BERR) == SET) && (__HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_ERRI) == SET))
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_BERR;
+
+ /* Clear BERR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_BERR);
+ }
+
+ /* I2C Over-Run/Under-Run interrupt occurred ----------------------------------------*/
+ if((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_OVR) == SET) && (__HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_ERRI) == SET))
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_OVR;
+
+ /* Clear OVR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_OVR);
+ }
+
+ /* I2C Arbitration Loss error interrupt occurred -------------------------------------*/
+ if((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ARLO) == SET) && (__HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_ERRI) == SET))
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_ARLO;
+
+ /* Clear ARLO flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ARLO);
+ }
+
+ /* Call the Error Callback in case of Error detected */
+ if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ HAL_I2C_ErrorCallback(hi2c);
+ }
+}
+
+/**
+ * @brief Master Tx Transfer completed callbacks.
+ * @param hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+ __weak void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_I2C_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Master Rx Transfer completed callbacks.
+ * @param hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_I2C_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/** @brief Slave Tx Transfer completed callbacks.
+ * @param hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+ __weak void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_I2C_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Slave Rx Transfer completed callbacks.
+ * @param hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_I2C_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Memory Tx Transfer completed callbacks.
+ * @param hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+ __weak void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_I2C_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Memory Rx Transfer completed callbacks.
+ * @param hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_I2C_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief I2C error callbacks.
+ * @param hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+ __weak void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_I2C_ErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Exported_Functions_Group3 Peripheral State and Errors functions
+ * @brief Peripheral State and Errors functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral State and Errors functions #####
+ ===============================================================================
+ [..]
+ This subsection permit to get in run-time the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Returns the I2C state.
+ * @param hi2c : I2C handle
+ * @retval HAL state
+ */
+HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c)
+{
+ return hi2c->State;
+}
+
+/**
+* @brief Return the I2C error code
+* @param hi2c : pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+* @retval I2C Error Code
+*/
+uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c)
+{
+ return hi2c->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup I2C_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Handle Interrupt Flags Master Transmit Mode
+ * @param hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_MasterTransmit_ISR(I2C_HandleTypeDef *hi2c)
+{
+ uint16_t DevAddress;
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) == SET)
+ {
+ /* Write data to TXDR */
+ hi2c->Instance->TXDR = (*hi2c->pBuffPtr++);
+ hi2c->XferSize--;
+ hi2c->XferCount--;
+ }
+ else if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TCR) == SET)
+ {
+ if((hi2c->XferSize == 0)&&(hi2c->XferCount!=0))
+ {
+ DevAddress = (hi2c->Instance->CR2 & I2C_CR2_SADD);
+
+ if(hi2c->XferCount > 255)
+ {
+ I2C_TransferConfig(hi2c,DevAddress,255, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+ hi2c->XferSize = 255;
+ }
+ else
+ {
+ I2C_TransferConfig(hi2c,DevAddress,hi2c->XferCount, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+ hi2c->XferSize = hi2c->XferCount;
+ }
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Wrong size Status regarding TCR flag event */
+ hi2c->ErrorCode |= HAL_I2C_ERROR_SIZE;
+ HAL_I2C_ErrorCallback(hi2c);
+ }
+ }
+ else if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TC) == SET)
+ {
+ if(hi2c->XferCount == 0)
+ {
+ /* Generate Stop */
+ hi2c->Instance->CR2 |= I2C_CR2_STOP;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Wrong size Status regarding TCR flag event */
+ hi2c->ErrorCode |= HAL_I2C_ERROR_SIZE;
+ HAL_I2C_ErrorCallback(hi2c);
+ }
+ }
+ else if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET)
+ {
+ /* Disable ERR, TC, STOP, NACK, TXI interrupt */
+ __HAL_I2C_DISABLE_IT(hi2c,I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_TXI );
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ __HAL_I2C_RESET_CR2(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ if(hi2c->State == HAL_I2C_STATE_MEM_BUSY_TX)
+ {
+ HAL_I2C_MemTxCpltCallback(hi2c);
+ }
+ else
+ {
+ HAL_I2C_MasterTxCpltCallback(hi2c);
+ }
+ }
+ else if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET)
+ {
+ /* Clear NACK Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+ HAL_I2C_ErrorCallback(hi2c);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Handle Interrupt Flags Master Receive Mode
+ * @param hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_MasterReceive_ISR(I2C_HandleTypeDef *hi2c)
+{
+ uint16_t DevAddress;
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET)
+ {
+ /* Read data from RXDR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->RXDR;
+ hi2c->XferSize--;
+ hi2c->XferCount--;
+ }
+ else if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TCR) == SET)
+ {
+ if((hi2c->XferSize == 0)&&(hi2c->XferCount!=0))
+ {
+ DevAddress = (hi2c->Instance->CR2 & I2C_CR2_SADD);
+
+ if(hi2c->XferCount > 255)
+ {
+ I2C_TransferConfig(hi2c,DevAddress,255, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+ hi2c->XferSize = 255;
+ }
+ else
+ {
+ I2C_TransferConfig(hi2c,DevAddress,hi2c->XferCount, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+ hi2c->XferSize = hi2c->XferCount;
+ }
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Wrong size Status regarding TCR flag event */
+ hi2c->ErrorCode |= HAL_I2C_ERROR_SIZE;
+ HAL_I2C_ErrorCallback(hi2c);
+ }
+ }
+ else if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TC) == SET)
+ {
+ if(hi2c->XferCount == 0)
+ {
+ /* Generate Stop */
+ hi2c->Instance->CR2 |= I2C_CR2_STOP;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Wrong size Status regarding TCR flag event */
+ hi2c->ErrorCode |= HAL_I2C_ERROR_SIZE;
+ HAL_I2C_ErrorCallback(hi2c);
+ }
+ }
+ else if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET)
+ {
+ /* Disable ERR, TC, STOP, NACK, TXI interrupt */
+ __HAL_I2C_DISABLE_IT(hi2c,I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_RXI );
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ __HAL_I2C_RESET_CR2(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ if(hi2c->State == HAL_I2C_STATE_MEM_BUSY_RX)
+ {
+ HAL_I2C_MemRxCpltCallback(hi2c);
+ }
+ else
+ {
+ HAL_I2C_MasterRxCpltCallback(hi2c);
+ }
+ }
+ else if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET)
+ {
+ /* Clear NACK Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+ HAL_I2C_ErrorCallback(hi2c);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+
+}
+
+/**
+ * @brief Handle Interrupt Flags Slave Transmit Mode
+ * @param hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_SlaveTransmit_ISR(I2C_HandleTypeDef *hi2c)
+{
+ /* Process locked */
+ __HAL_LOCK(hi2c);
+
+ if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) != RESET)
+ {
+ /* Check that I2C transfer finished */
+ /* if yes, normal usecase, a NACK is sent by the MASTER when Transfer is finished */
+ /* Mean XferCount == 0*/
+ /* So clear Flag NACKF only */
+ if(hi2c->XferCount == 0)
+ {
+ /* Clear NACK Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ }
+ else
+ {
+ /* if no, error usecase, a Non-Acknowledge of last Data is generated by the MASTER*/
+ /* Clear NACK Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Set ErrorCode corresponding to a Non-Acknowledge */
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call the Error callback to prevent upper layer */
+ HAL_I2C_ErrorCallback(hi2c);
+ }
+ }
+ else if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR) == SET)
+ {
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+ }
+ /* Check first if STOPF is set */
+ /* to prevent a Write Data in TX buffer */
+ /* which is stuck in TXDR until next */
+ /* communication with Master */
+ else if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET)
+ {
+ /* Disable ERRI, TCI, STOPI, NACKI, ADDRI, RXI, TXI interrupt */
+ __HAL_I2C_DISABLE_IT(hi2c,I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI );
+
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ HAL_I2C_SlaveTxCpltCallback(hi2c);
+ }
+ else if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) == SET)
+ {
+ /* Write data to TXDR only if XferCount not reach "0" */
+ /* A TXIS flag can be set, during STOP treatment */
+ if(hi2c->XferCount > 0)
+ {
+ /* Write data to TXDR */
+ hi2c->Instance->TXDR = (*hi2c->pBuffPtr++);
+ hi2c->XferCount--;
+ }
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Handle Interrupt Flags Slave Receive Mode
+ * @param hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_SlaveReceive_ISR(I2C_HandleTypeDef *hi2c)
+{
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) != RESET)
+ {
+ /* Clear NACK Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+ HAL_I2C_ErrorCallback(hi2c);
+ }
+ else if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR) == SET)
+ {
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+ }
+ else if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET)
+ {
+ /* Read data from RXDR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->RXDR;
+ hi2c->XferSize--;
+ hi2c->XferCount--;
+ }
+ else if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET)
+ {
+ /* Disable ERRI, TCI, STOPI, NACKI, ADDRI, RXI, TXI interrupt */
+ __HAL_I2C_DISABLE_IT(hi2c,I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_RXI );
+
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ HAL_I2C_SlaveRxCpltCallback(hi2c);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Master sends target device address followed by internal memory address for write request.
+ * @param hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress: Target device address
+ * @param MemAddress: Internal memory address
+ * @param MemAddSize: Size of internal memory address
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout)
+{
+ I2C_TransferConfig(hi2c,DevAddress,MemAddSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE);
+
+ /* Wait until TXIS flag is set */
+ if(I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* If Memory address size is 8Bit */
+ if(MemAddSize == I2C_MEMADD_SIZE_8BIT)
+ {
+ /* Send Memory Address */
+ hi2c->Instance->TXDR = __HAL_I2C_MEM_ADD_LSB(MemAddress);
+ }
+ /* If Memory address size is 16Bit */
+ else
+ {
+ /* Send MSB of Memory Address */
+ hi2c->Instance->TXDR = __HAL_I2C_MEM_ADD_MSB(MemAddress);
+
+ /* Wait until TXIS flag is set */
+ if(I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Send LSB of Memory Address */
+ hi2c->Instance->TXDR = __HAL_I2C_MEM_ADD_LSB(MemAddress);
+ }
+
+ /* Wait until TCR flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+return HAL_OK;
+}
+
+/**
+ * @brief Master sends target device address followed by internal memory address for read request.
+ * @param hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress: Target device address
+ * @param MemAddress: Internal memory address
+ * @param MemAddSize: Size of internal memory address
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout)
+{
+ I2C_TransferConfig(hi2c,DevAddress,MemAddSize, I2C_SOFTEND_MODE, I2C_GENERATE_START_WRITE);
+
+ /* Wait until TXIS flag is set */
+ if(I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* If Memory address size is 8Bit */
+ if(MemAddSize == I2C_MEMADD_SIZE_8BIT)
+ {
+ /* Send Memory Address */
+ hi2c->Instance->TXDR = __HAL_I2C_MEM_ADD_LSB(MemAddress);
+ }
+ /* If Mememory address size is 16Bit */
+ else
+ {
+ /* Send MSB of Memory Address */
+ hi2c->Instance->TXDR = __HAL_I2C_MEM_ADD_MSB(MemAddress);
+
+ /* Wait until TXIS flag is set */
+ if(I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Send LSB of Memory Address */
+ hi2c->Instance->TXDR = __HAL_I2C_MEM_ADD_LSB(MemAddress);
+ }
+
+ /* Wait until TC flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TC, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DMA I2C master transmit process complete callback.
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma)
+{
+ uint16_t DevAddress;
+ I2C_HandleTypeDef* hi2c = (I2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ /* Check if last DMA request was done with RELOAD */
+ /* Set NBYTES to write and reload if size > 255 */
+ if( (hi2c->XferSize == 255) && (hi2c->XferSize < hi2c->XferCount) )
+ {
+ /* Wait until TCR flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, I2C_TIMEOUT_TCR) != HAL_OK)
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+ }
+
+ /* Disable DMA Request */
+ hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN;
+
+ /* Check if Errors has been detected during transfer */
+ if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
+ {
+ /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+ /* Wait until STOPF flag is reset */
+ if(I2C_WaitOnSTOPFlagUntilTimeout(hi2c, I2C_TIMEOUT_STOPF) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+ }
+ else
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ __HAL_I2C_RESET_CR2(hi2c);
+
+ hi2c->XferCount = 0;
+
+ hi2c->State = HAL_I2C_STATE_READY;
+ HAL_I2C_ErrorCallback(hi2c);
+ }
+ else
+ {
+ hi2c->pBuffPtr += hi2c->XferSize;
+ hi2c->XferCount -= hi2c->XferSize;
+ if(hi2c->XferCount > 255)
+ {
+ hi2c->XferSize = 255;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ }
+
+ DevAddress = (hi2c->Instance->CR2 & I2C_CR2_SADD);
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize);
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if size > 255 */
+ if( (hi2c->XferSize == 255) && (hi2c->XferSize < hi2c->XferCount) )
+ {
+ I2C_TransferConfig(hi2c,DevAddress,hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+ }
+ else
+ {
+ I2C_TransferConfig(hi2c,DevAddress,hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+ }
+
+ /* Wait until TXIS flag is set */
+ if(I2C_WaitOnTXISFlagUntilTimeout(hi2c, I2C_TIMEOUT_TXIS) != HAL_OK)
+ {
+ /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+ /* Wait until STOPF flag is reset */
+ if(I2C_WaitOnSTOPFlagUntilTimeout(hi2c, I2C_TIMEOUT_STOPF) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+ }
+ else
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ __HAL_I2C_RESET_CR2(hi2c);
+
+ hi2c->XferCount = 0;
+
+ hi2c->State = HAL_I2C_STATE_READY;
+ HAL_I2C_ErrorCallback(hi2c);
+ }
+ else
+ {
+ /* Enable DMA Request */
+ hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN;
+ }
+ }
+ }
+ else
+ {
+ /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+ /* Wait until STOPF flag is reset */
+ if(I2C_WaitOnSTOPFlagUntilTimeout(hi2c, I2C_TIMEOUT_STOPF) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+ }
+ else
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ __HAL_I2C_RESET_CR2(hi2c);
+
+ /* Disable DMA Request */
+ hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN;
+
+ hi2c->XferCount = 0;
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Check if Errors has been detected during transfer */
+ if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
+ {
+ HAL_I2C_ErrorCallback(hi2c);
+ }
+ else
+ {
+ HAL_I2C_MasterTxCpltCallback(hi2c);
+ }
+ }
+}
+
+/**
+ * @brief DMA I2C slave transmit process complete callback.
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma)
+{
+ I2C_HandleTypeDef* hi2c = (I2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ /* Wait until STOP flag is set */
+ if(I2C_WaitOnSTOPFlagUntilTimeout(hi2c, I2C_TIMEOUT_STOPF) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Normal Use case, a AF is generated by master */
+ /* to inform slave the end of transfer */
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+ }
+ else
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c,I2C_FLAG_STOPF);
+
+ /* Wait until BUSY flag is reset */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY) != HAL_OK)
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+ }
+
+ /* Disable DMA Request */
+ hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN;
+
+ hi2c->XferCount = 0;
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Check if Errors has been detected during transfer */
+ if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
+ {
+ HAL_I2C_ErrorCallback(hi2c);
+ }
+ else
+ {
+ HAL_I2C_SlaveTxCpltCallback(hi2c);
+ }
+}
+
+/**
+ * @brief DMA I2C master receive process complete callback
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+ I2C_HandleTypeDef* hi2c = (I2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+ uint16_t DevAddress;
+
+ /* Check if last DMA request was done with RELOAD */
+ /* Set NBYTES to write and reload if size > 255 */
+ if( (hi2c->XferSize == 255) && (hi2c->XferSize < hi2c->XferCount) )
+ {
+ /* Wait until TCR flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, I2C_TIMEOUT_TCR) != HAL_OK)
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+ }
+
+ /* Disable DMA Request */
+ hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN;
+
+ /* Check if Errors has been detected during transfer */
+ if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
+ {
+ /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+ /* Wait until STOPF flag is reset */
+ if(I2C_WaitOnSTOPFlagUntilTimeout(hi2c, I2C_TIMEOUT_STOPF) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+ }
+ else
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ __HAL_I2C_RESET_CR2(hi2c);
+
+ hi2c->XferCount = 0;
+
+ hi2c->State = HAL_I2C_STATE_READY;
+ HAL_I2C_ErrorCallback(hi2c);
+ }
+ else
+ {
+ hi2c->pBuffPtr += hi2c->XferSize;
+ hi2c->XferCount -= hi2c->XferSize;
+ if(hi2c->XferCount > 255)
+ {
+ hi2c->XferSize = 255;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ }
+
+ DevAddress = (hi2c->Instance->CR2 & I2C_CR2_SADD);
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)hi2c->pBuffPtr, hi2c->XferSize);
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if size > 255 */
+ if( (hi2c->XferSize == 255) && (hi2c->XferSize < hi2c->XferCount) )
+ {
+ I2C_TransferConfig(hi2c,DevAddress,hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+ }
+ else
+ {
+ I2C_TransferConfig(hi2c,DevAddress,hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+ }
+
+ /* Wait until RXNE flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, I2C_TIMEOUT_RXNE) != HAL_OK)
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+ }
+
+ /* Check if Errors has been detected during transfer */
+ if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
+ {
+ /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+ /* Wait until STOPF flag is reset */
+ if(I2C_WaitOnSTOPFlagUntilTimeout(hi2c, I2C_TIMEOUT_STOPF) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+ }
+ else
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ __HAL_I2C_RESET_CR2(hi2c);
+
+ hi2c->XferCount = 0;
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ HAL_I2C_ErrorCallback(hi2c);
+ }
+ else
+ {
+ /* Enable DMA Request */
+ hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN;
+ }
+ }
+ }
+ else
+ {
+ /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+ /* Wait until STOPF flag is reset */
+ if(I2C_WaitOnSTOPFlagUntilTimeout(hi2c, I2C_TIMEOUT_STOPF) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+ }
+ else
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ __HAL_I2C_RESET_CR2(hi2c);
+
+ /* Disable DMA Request */
+ hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN;
+
+ hi2c->XferCount = 0;
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Check if Errors has been detected during transfer */
+ if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
+ {
+ HAL_I2C_ErrorCallback(hi2c);
+ }
+ else
+ {
+ HAL_I2C_MasterRxCpltCallback(hi2c);
+ }
+ }
+}
+
+/**
+ * @brief DMA I2C slave receive process complete callback.
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+ I2C_HandleTypeDef* hi2c = (I2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ /* Wait until STOPF flag is reset */
+ if(I2C_WaitOnSTOPFlagUntilTimeout(hi2c, I2C_TIMEOUT_STOPF) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+ }
+ else
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+ }
+ }
+
+ /* Clear STOPF flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Wait until BUSY flag is reset */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY) != HAL_OK)
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+ }
+
+ /* Disable DMA Request */
+ hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN;
+
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+ hi2c->XferCount = 0;
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Check if Errors has been detected during transfer */
+ if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
+ {
+ HAL_I2C_ErrorCallback(hi2c);
+ }
+ else
+ {
+ HAL_I2C_SlaveRxCpltCallback(hi2c);
+ }
+}
+
+/**
+ * @brief DMA I2C Memory Write process complete callback
+ * @param hdma : DMA handle
+ * @retval None
+ */
+static void I2C_DMAMemTransmitCplt(DMA_HandleTypeDef *hdma)
+{
+ uint16_t DevAddress;
+ I2C_HandleTypeDef* hi2c = ( I2C_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ /* Check if last DMA request was done with RELOAD */
+ /* Set NBYTES to write and reload if size > 255 */
+ if( (hi2c->XferSize == 255) && (hi2c->XferSize < hi2c->XferCount) )
+ {
+ /* Wait until TCR flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, I2C_TIMEOUT_TCR) != HAL_OK)
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+ }
+
+ /* Disable DMA Request */
+ hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN;
+
+ /* Check if Errors has been detected during transfer */
+ if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
+ {
+ /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+ /* Wait until STOPF flag is reset */
+ if(I2C_WaitOnSTOPFlagUntilTimeout(hi2c, I2C_TIMEOUT_STOPF) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+ }
+ else
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ __HAL_I2C_RESET_CR2(hi2c);
+
+ hi2c->XferCount = 0;
+
+ hi2c->State = HAL_I2C_STATE_READY;
+ HAL_I2C_ErrorCallback(hi2c);
+ }
+ else
+ {
+ hi2c->pBuffPtr += hi2c->XferSize;
+ hi2c->XferCount -= hi2c->XferSize;
+ if(hi2c->XferCount > 255)
+ {
+ hi2c->XferSize = 255;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ }
+
+ DevAddress = (hi2c->Instance->CR2 & I2C_CR2_SADD);
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize);
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if size > 255 */
+ if( (hi2c->XferSize == 255) && (hi2c->XferSize < hi2c->XferCount) )
+ {
+ I2C_TransferConfig(hi2c,DevAddress,hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+ }
+ else
+ {
+ I2C_TransferConfig(hi2c,DevAddress,hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+ }
+
+ /* Wait until TXIS flag is set */
+ if(I2C_WaitOnTXISFlagUntilTimeout(hi2c, I2C_TIMEOUT_TXIS) != HAL_OK)
+ {
+ /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+ /* Wait until STOPF flag is reset */
+ if(I2C_WaitOnSTOPFlagUntilTimeout(hi2c, I2C_TIMEOUT_STOPF) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+ }
+ else
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ __HAL_I2C_RESET_CR2(hi2c);
+
+ hi2c->XferCount = 0;
+
+ hi2c->State = HAL_I2C_STATE_READY;
+ HAL_I2C_ErrorCallback(hi2c);
+ }
+ else
+ {
+ /* Enable DMA Request */
+ hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN;
+ }
+ }
+ }
+ else
+ {
+ /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+ /* Wait until STOPF flag is reset */
+ if(I2C_WaitOnSTOPFlagUntilTimeout(hi2c, I2C_TIMEOUT_STOPF) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+ }
+ else
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ __HAL_I2C_RESET_CR2(hi2c);
+
+ /* Disable DMA Request */
+ hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN;
+
+ hi2c->XferCount = 0;
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Check if Errors has been detected during transfer */
+ if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
+ {
+ HAL_I2C_ErrorCallback(hi2c);
+ }
+ else
+ {
+ HAL_I2C_MemTxCpltCallback(hi2c);
+ }
+ }
+}
+
+/**
+ * @brief DMA I2C Memory Read process complete callback
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void I2C_DMAMemReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+ I2C_HandleTypeDef* hi2c = ( I2C_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ uint16_t DevAddress;
+
+ /* Check if last DMA request was done with RELOAD */
+ /* Set NBYTES to write and reload if size > 255 */
+ if( (hi2c->XferSize == 255) && (hi2c->XferSize < hi2c->XferCount) )
+ {
+ /* Wait until TCR flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, I2C_TIMEOUT_TCR) != HAL_OK)
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+ }
+
+ /* Disable DMA Request */
+ hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN;
+
+ /* Check if Errors has been detected during transfer */
+ if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
+ {
+ /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+ /* Wait until STOPF flag is reset */
+ if(I2C_WaitOnSTOPFlagUntilTimeout(hi2c, I2C_TIMEOUT_STOPF) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+ }
+ else
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ __HAL_I2C_RESET_CR2(hi2c);
+
+ hi2c->XferCount = 0;
+
+ hi2c->State = HAL_I2C_STATE_READY;
+ HAL_I2C_ErrorCallback(hi2c);
+ }
+ else
+ {
+ hi2c->pBuffPtr += hi2c->XferSize;
+ hi2c->XferCount -= hi2c->XferSize;
+ if(hi2c->XferCount > 255)
+ {
+ hi2c->XferSize = 255;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ }
+
+ DevAddress = (hi2c->Instance->CR2 & I2C_CR2_SADD);
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)hi2c->pBuffPtr, hi2c->XferSize);
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if size > 255 */
+ if( (hi2c->XferSize == 255) && (hi2c->XferSize < hi2c->XferCount) )
+ {
+ I2C_TransferConfig(hi2c,DevAddress,hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+ }
+ else
+ {
+ I2C_TransferConfig(hi2c,DevAddress,hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+ }
+
+ /* Wait until RXNE flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, I2C_TIMEOUT_RXNE) != HAL_OK)
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+ }
+
+ /* Check if Errors has been detected during transfer */
+ if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
+ {
+ /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+ /* Wait until STOPF flag is reset */
+ if(I2C_WaitOnSTOPFlagUntilTimeout(hi2c, I2C_TIMEOUT_STOPF) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+ }
+ else
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ __HAL_I2C_RESET_CR2(hi2c);
+
+ hi2c->XferCount = 0;
+
+ hi2c->State = HAL_I2C_STATE_READY;
+ HAL_I2C_ErrorCallback(hi2c);
+ }
+ else
+ {
+ /* Enable DMA Request */
+ hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN;
+ }
+ }
+ }
+ else
+ {
+ /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+ /* Wait until STOPF flag is reset */
+ if(I2C_WaitOnSTOPFlagUntilTimeout(hi2c, I2C_TIMEOUT_STOPF) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+ }
+ else
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ __HAL_I2C_RESET_CR2(hi2c);
+
+ /* Disable DMA Request */
+ hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN;
+
+ hi2c->XferCount = 0;
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Check if Errors has been detected during transfer */
+ if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
+ {
+ HAL_I2C_ErrorCallback(hi2c);
+ }
+ else
+ {
+ HAL_I2C_MemRxCpltCallback(hi2c);
+ }
+ }
+}
+
+/**
+ * @brief DMA I2C communication error callback.
+ * @param hdma : DMA handle
+ * @retval None
+ */
+static void I2C_DMAError(DMA_HandleTypeDef *hdma)
+{
+ I2C_HandleTypeDef* hi2c = ( I2C_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ /* Disable Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+ hi2c->XferCount = 0;
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ hi2c->ErrorCode |= HAL_I2C_ERROR_DMA;
+
+ HAL_I2C_ErrorCallback(hi2c);
+}
+
+/**
+ * @brief This function handles I2C Communication Timeout.
+ * @param hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param Flag: specifies the I2C flag to check.
+ * @param Status: The new Flag status (SET or RESET).
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, uint32_t Timeout)
+{
+ uint32_t tickstart = HAL_GetTick();
+
+ /* Wait until flag is set */
+ if(Status == RESET)
+ {
+ while(__HAL_I2C_GET_FLAG(hi2c, Flag) == RESET)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0) || ((HAL_GetTick() - tickstart) > Timeout))
+ {
+ hi2c->State= HAL_I2C_STATE_READY;
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ else
+ {
+ while(__HAL_I2C_GET_FLAG(hi2c, Flag) != RESET)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0) || ((HAL_GetTick() - tickstart) > Timeout))
+ {
+ hi2c->State= HAL_I2C_STATE_READY;
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles I2C Communication Timeout for specific usage of TXIS flag.
+ * @param hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout)
+{
+ uint32_t tickstart = HAL_GetTick();
+
+ while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) == RESET)
+ {
+ /* Check if a NACK is detected */
+ if(I2C_IsAcknowledgeFailed(hi2c, Timeout) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0) || ((HAL_GetTick() - tickstart) > Timeout))
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles I2C Communication Timeout for specific usage of STOP flag.
+ * @param hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout)
+{
+ uint32_t tickstart = 0x00;
+ tickstart = HAL_GetTick();
+
+ while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET)
+ {
+ /* Check if a NACK is detected */
+ if(I2C_IsAcknowledgeFailed(hi2c, Timeout) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check for the Timeout */
+ if((Timeout == 0) || ((HAL_GetTick() - tickstart) > Timeout))
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles I2C Communication Timeout for specific usage of RXNE flag.
+ * @param hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout)
+{
+ uint32_t tickstart = 0x00;
+ tickstart = HAL_GetTick();
+
+ while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == RESET)
+ {
+ /* Check if a STOPF is detected */
+ if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET)
+ {
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ __HAL_I2C_RESET_CR2(hi2c);
+
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_ERROR;
+ }
+
+ /* Check for the Timeout */
+ if((Timeout == 0) || ((HAL_GetTick() - tickstart) > Timeout))
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles Acknowledge failed detection during an I2C Communication.
+ * @param hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_IsAcknowledgeFailed(I2C_HandleTypeDef *hi2c, uint32_t Timeout)
+{
+ uint32_t tickstart = 0x00;
+ tickstart = HAL_GetTick();
+
+ if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET)
+ {
+ /* Generate stop if necessary only in case of I2C peripheral in MASTER mode */
+ if((hi2c->State == HAL_I2C_STATE_MASTER_BUSY_TX) || (hi2c->State == HAL_I2C_STATE_MEM_BUSY_TX)
+ || (hi2c->State == HAL_I2C_STATE_MEM_BUSY_RX))
+ {
+ /* No need to generate the STOP condition if AUTOEND mode is enabled */
+ /* Generate the STOP condition only in case of SOFTEND mode is enabled */
+ if((hi2c->Instance->CR2 & I2C_AUTOEND_MODE) != I2C_AUTOEND_MODE)
+ {
+ /* Generate Stop */
+ hi2c->Instance->CR2 |= I2C_CR2_STOP;
+ }
+ }
+
+ /* Wait until STOP Flag is reset */
+ /* AutoEnd should be initiate after AF */
+ while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0) || ((HAL_GetTick() - tickstart) > Timeout))
+ {
+ hi2c->State= HAL_I2C_STATE_READY;
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Clear NACKF Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ __HAL_I2C_RESET_CR2(hi2c);
+
+ hi2c->ErrorCode = HAL_I2C_ERROR_AF;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_ERROR;
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Handles I2Cx communication when starting transfer or during transfer (TC or TCR flag are set).
+ * @param hi2c: I2C handle.
+ * @param DevAddress: specifies the slave address to be programmed.
+ * @param Size: specifies the number of bytes to be programmed.
+ * This parameter must be a value between 0 and 255.
+ * @param Mode: new state of the I2C START condition generation.
+ * This parameter can be one of the following values:
+ * @arg I2C_RELOAD_MODE: Enable Reload mode .
+ * @arg I2C_AUTOEND_MODE: Enable Automatic end mode.
+ * @arg I2C_SOFTEND_MODE: Enable Software end mode.
+ * @param Request: new state of the I2C START condition generation.
+ * This parameter can be one of the following values:
+ * @arg I2C_NO_STARTSTOP: Don't Generate stop and start condition.
+ * @arg I2C_GENERATE_STOP: Generate stop condition (Size should be set to 0).
+ * @arg I2C_GENERATE_START_READ: Generate Restart for read request.
+ * @arg I2C_GENERATE_START_WRITE: Generate Restart for write request.
+ * @retval None
+ */
+static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, uint32_t Request)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+ assert_param(IS_TRANSFER_MODE(Mode));
+ assert_param(IS_TRANSFER_REQUEST(Request));
+
+ /* Get the CR2 register value */
+ tmpreg = hi2c->Instance->CR2;
+
+ /* clear tmpreg specific bits */
+ tmpreg &= (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | I2C_CR2_RD_WRN | I2C_CR2_START | I2C_CR2_STOP));
+
+ /* update tmpreg */
+ tmpreg |= (uint32_t)(((uint32_t)DevAddress & I2C_CR2_SADD) | (((uint32_t)Size << 16 ) & I2C_CR2_NBYTES) | \
+ (uint32_t)Mode | (uint32_t)Request);
+
+ /* update CR2 register */
+ hi2c->Instance->CR2 = tmpreg;
+}
+
+/**
+ * @}
+ */
+
+#endif /* HAL_I2C_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/src/stm32f0xx_hal_i2c_ex.c b/f0/src/stm32f0xx_hal_i2c_ex.c
new file mode 100755
index 0000000000000000000000000000000000000000..59c070ae5eb656b5ab3a10673c310d6eeca800d2
--- /dev/null
+++ b/f0/src/stm32f0xx_hal_i2c_ex.c
@@ -0,0 +1,292 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_i2c_ex.c
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief I2C Extension HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of I2C extension peripheral:
+ * + Extension features functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### I2C peripheral extension features #####
+ ==============================================================================
+
+ [..] Comparing to other previous devices, the I2C interface for STM32F0XX
+ devices contains the following additional features
+
+ (+) Possibility to disable or enable Analog Noise Filter
+ (+) Use of a configured Digital Noise Filter
+ (+) Disable or enable wakeup from Stop mode
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..] This driver provides functions to configure Noise Filter
+ (#) Configure I2C Analog noise filter using the function HAL_I2CEx_AnalogFilter_Config()
+ (#) Configure I2C Digital noise filter using the function HAL_I2CEx_DigitalFilter_Config()
+ (#) Configure the enabling or disabling of I2C Wake Up Mode using the functions :
+ (++) HAL_I2CEx_EnableWakeUp()
+ (++) HAL_I2CEx_DisableWakeUp()
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup I2CEx I2CEx Extended HAL module driver
+ * @brief I2C Extended HAL module driver
+ * @{
+ */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup I2CEx_Exported_Functions I2CEx Exported Functions
+ * @{
+ */
+
+/** @defgroup I2CEx_Exported_Functions_Group1 Extended features functions
+ * @brief Extended features functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Extension features functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Configure Noise Filters
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Configures I2C Analog noise filter.
+ * @param hi2c : pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2Cx peripheral.
+ * @param AnalogFilter : new state of the Analog filter.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2CEx_AnalogFilter_Config(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+ assert_param(IS_I2C_ANALOG_FILTER(AnalogFilter));
+
+ if((hi2c->State == HAL_I2C_STATE_BUSY) || (hi2c->State == HAL_I2C_STATE_MASTER_BUSY_TX) || (hi2c->State == HAL_I2C_STATE_MASTER_BUSY_RX)
+ || (hi2c->State == HAL_I2C_STATE_SLAVE_BUSY_TX) || (hi2c->State == HAL_I2C_STATE_SLAVE_BUSY_RX))
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY;
+
+ /* Disable the selected I2C peripheral */
+ __HAL_I2C_DISABLE(hi2c);
+
+ /* Reset I2Cx ANOFF bit */
+ hi2c->Instance->CR1 &= ~(I2C_CR1_ANFOFF);
+
+ /* Set analog filter bit*/
+ hi2c->Instance->CR1 |= AnalogFilter;
+
+ __HAL_I2C_ENABLE(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures I2C Digital noise filter.
+ * @param hi2c : pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2Cx peripheral.
+ * @param DigitalFilter : Coefficient of digital noise filter between 0x00 and 0x0F.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2CEx_DigitalFilter_Config(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+ assert_param(IS_I2C_DIGITAL_FILTER(DigitalFilter));
+
+ if((hi2c->State == HAL_I2C_STATE_BUSY) || (hi2c->State == HAL_I2C_STATE_MASTER_BUSY_TX) || (hi2c->State == HAL_I2C_STATE_MASTER_BUSY_RX)
+ || (hi2c->State == HAL_I2C_STATE_SLAVE_BUSY_TX) || (hi2c->State == HAL_I2C_STATE_SLAVE_BUSY_RX))
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY;
+
+ /* Disable the selected I2C peripheral */
+ __HAL_I2C_DISABLE(hi2c);
+
+ /* Get the old register value */
+ tmpreg = hi2c->Instance->CR1;
+
+ /* Reset I2Cx DNF bits [11:8] */
+ tmpreg &= ~(I2C_CR1_DFN);
+
+ /* Set I2Cx DNF coefficient */
+ tmpreg |= DigitalFilter << 8;
+
+ /* Store the new register value */
+ hi2c->Instance->CR1 = tmpreg;
+
+ __HAL_I2C_ENABLE(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+}
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+/**
+ * @brief Enables I2C wakeup from stop mode.
+ * @param hi2c : pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2Cx peripheral.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp (I2C_HandleTypeDef *hi2c)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+
+ if((hi2c->State == HAL_I2C_STATE_BUSY) || (hi2c->State == HAL_I2C_STATE_MASTER_BUSY_TX) || (hi2c->State == HAL_I2C_STATE_MASTER_BUSY_RX)
+ || (hi2c->State == HAL_I2C_STATE_SLAVE_BUSY_TX) || (hi2c->State == HAL_I2C_STATE_SLAVE_BUSY_RX))
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY;
+
+ /* Disable the selected I2C peripheral */
+ __HAL_I2C_DISABLE(hi2c);
+
+ /* Enable wakeup from stop mode */
+ hi2c->Instance->CR1 |= I2C_CR1_WUPEN;
+
+ __HAL_I2C_ENABLE(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Disables I2C wakeup from stop mode.
+ * @param hi2c : pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2Cx peripheral.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp (I2C_HandleTypeDef *hi2c)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+
+ if((hi2c->State == HAL_I2C_STATE_BUSY) || (hi2c->State == HAL_I2C_STATE_MASTER_BUSY_TX) || (hi2c->State == HAL_I2C_STATE_MASTER_BUSY_RX)
+ || (hi2c->State == HAL_I2C_STATE_SLAVE_BUSY_TX) || (hi2c->State == HAL_I2C_STATE_SLAVE_BUSY_RX))
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY;
+
+ /* Disable the selected I2C peripheral */
+ __HAL_I2C_DISABLE(hi2c);
+
+ /* Enable wakeup from stop mode */
+ hi2c->Instance->CR1 &= ~(I2C_CR1_WUPEN);
+
+ __HAL_I2C_ENABLE(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+}
+#endif /* !(STM32F030x6) && !(STM32F030x8) && !(STM32F070x6) && !(STM32F070xB) && !(STM32F030xC) */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_I2C_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/src/stm32f0xx_hal_i2s.c b/f0/src/stm32f0xx_hal_i2s.c
new file mode 100755
index 0000000000000000000000000000000000000000..5a2e5f0c586483ad3cb63ff66235ebbf879ff8e1
--- /dev/null
+++ b/f0/src/stm32f0xx_hal_i2s.c
@@ -0,0 +1,1389 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_i2s.c
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief I2S HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Integrated Interchip Sound (I2S) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral State and Errors functions
+ @verbatim
+ ===============================================================================
+ ##### How to use this driver #####
+ ===============================================================================
+ [..]
+ The I2S HAL driver can be used as follow:
+
+ (#) Declare a I2S_HandleTypeDef handle structure.
+ (#) Initialize the I2S low level resources by implement the HAL_I2S_MspInit() API:
+ (##) Enable the SPIx interface clock.
+ (##) I2S pins configuration:
+ (+++) Enable the clock for the I2S GPIOs.
+ (+++) Configure these I2S pins as alternate function pull-up.
+ (##) NVIC configuration if you need to use interrupt process (HAL_I2S_Transmit_IT()
+ and HAL_I2S_Receive_IT() APIs).
+ (+++) Configure the I2Sx interrupt priority.
+ (+++) Enable the NVIC I2S IRQ handle.
+ (##) DMA Configuration if you need to use DMA process (HAL_I2S_Transmit_DMA()
+ and HAL_I2S_Receive_DMA() APIs:
+ (+++) Declare a DMA handle structure for the Tx/Rx Channel.
+ (+++) Enable the DMAx interface clock.
+ (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters.
+ (+++) Configure the DMA Tx/Rx Channel.
+ (+++) Associate the initilalized DMA handle to the I2S DMA Tx/Rx handle.
+ (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the
+ DMA Tx/Rx Channel.
+
+ (#) Program the Mode, Standard, Data Format, MCLK Output, Audio frequency and Polarity
+ using HAL_I2S_Init() function.
+
+ -@- The specific I2S interrupts (Transmission complete interrupt,
+ RXNE interrupt and Error Interrupts) will be managed using the macros
+ __HAL_I2S_ENABLE_IT() and __HAL_I2S_DISABLE_IT() inside the transmit and receive process.
+ -@- Make sure that either:
+ (+@) External clock source is configured after setting correctly
+ the define constant EXTERNAL_CLOCK_VALUE in the stm32f0xx_hal_conf.h file.
+
+ (#) Three mode of operations are available within this driver :
+
+ *** Polling mode IO operation ***
+ =================================
+ [..]
+ (+) Send an amount of data in blocking mode using HAL_I2S_Transmit()
+ (+) Receive an amount of data in blocking mode using HAL_I2S_Receive()
+
+ *** Interrupt mode IO operation ***
+ ===================================
+ [..]
+ (+) Send an amount of data in non blocking mode using HAL_I2S_Transmit_IT()
+ (+) At transmission end of half transfer HAL_I2S_TxHalfCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2S_TxHalfCpltCallback
+ (+) At transmission end of transfer HAL_I2S_TxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2S_TxCpltCallback
+ (+) Receive an amount of data in non blocking mode using HAL_I2S_Receive_IT()
+ (+) At reception end of half transfer HAL_I2S_RxHalfCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2S_RxHalfCpltCallback
+ (+) At reception end of transfer HAL_I2S_RxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2S_RxCpltCallback
+ (+) In case of transfer Error, HAL_I2S_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_I2S_ErrorCallback
+
+ *** DMA mode IO operation ***
+ ==============================
+ [..]
+ (+) Send an amount of data in non blocking mode (DMA) using HAL_I2S_Transmit_DMA()
+ (+) At transmission end of half transfer HAL_I2S_TxHalfCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2S_TxHalfCpltCallback
+ (+) At transmission end of transfer HAL_I2S_TxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2S_TxCpltCallback
+ (+) Receive an amount of data in non blocking mode (DMA) using HAL_I2S_Receive_DMA()
+ (+) At reception end of half transfer HAL_I2S_RxHalfCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2S_RxHalfCpltCallback
+ (+) At reception end of transfer HAL_I2S_RxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2S_RxCpltCallback
+ (+) In case of transfer Error, HAL_I2S_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_I2S_ErrorCallback
+ (+) Pause the DMA Transfer using HAL_I2S_DMAPause()
+ (+) Resume the DMA Transfer using HAL_I2S_DMAResume()
+ (+) Stop the DMA Transfer using HAL_I2S_DMAStop()
+
+ *** I2S HAL driver macros list ***
+ =============================================
+ [..]
+ Below the list of most used macros in I2S HAL driver.
+
+ (+) __HAL_I2S_ENABLE: Enable the specified SPI peripheral (in I2S mode)
+ (+) __HAL_I2S_DISABLE: Disable the specified SPI peripheral (in I2S mode)
+ (+) __HAL_I2S_ENABLE_IT : Enable the specified I2S interrupts
+ (+) __HAL_I2S_DISABLE_IT : Disable the specified I2S interrupts
+ (+) __HAL_I2S_GET_FLAG: Check whether the specified I2S flag is set or not
+
+ [..]
+ (@) You can refer to the I2S HAL driver header file for more useful macros
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+#ifdef HAL_I2S_MODULE_ENABLED
+
+#if defined(STM32F031x6) || defined(STM32F038xx) || \
+ defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup I2S I2S HAL module driver
+ * @brief I2S HAL module driver
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup I2S_Private_Functions I2S Private Functions
+ * @{
+ */
+static void I2S_DMATxCplt(DMA_HandleTypeDef *hdma);
+static void I2S_DMATxHalfCplt(DMA_HandleTypeDef *hdma);
+static void I2S_DMARxCplt(DMA_HandleTypeDef *hdma);
+static void I2S_DMARxHalfCplt(DMA_HandleTypeDef *hdma);
+static void I2S_DMAError(DMA_HandleTypeDef *hdma);
+static void I2S_Transmit_IT(I2S_HandleTypeDef *hi2s);
+static void I2S_Receive_IT(I2S_HandleTypeDef *hi2s);
+static HAL_StatusTypeDef I2S_WaitFlagStateUntilTimeout(I2S_HandleTypeDef *hi2s, uint32_t Flag, uint32_t State, uint32_t Timeout);
+/**
+ * @}
+ */
+
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup I2S_Exported_Functions I2S Exported Functions
+ * @{
+ */
+
+/** @defgroup I2S_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..] This subsection provides a set of functions allowing to initialize and
+ de-initialiaze the I2Sx peripheral in simplex mode:
+
+ (+) User must Implement HAL_I2S_MspInit() function in which he configures
+ all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ).
+
+ (+) Call the function HAL_I2S_Init() to configure the selected device with
+ the selected configuration:
+ (++) Mode
+ (++) Standard
+ (++) Data Format
+ (++) MCLK Output
+ (++) Audio frequency
+ (++) Polarity
+
+ (+) Call the function HAL_I2S_DeInit() to restore the default configuration
+ of the selected I2Sx periperal.
+ @endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the I2S according to the specified parameters
+ * in the I2S_InitTypeDef and create the associated handle.
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s)
+{
+ uint32_t tmpreg = 0, i2sdiv = 2, i2sodd = 0, packetlength = 1;
+ uint32_t tmp = 0, i2sclk = 0;
+
+ /* Check the I2S handle allocation */
+ if(hi2s == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the I2S parameters */
+ assert_param(IS_I2S_ALL_INSTANCE(hi2s->Instance));
+ assert_param(IS_I2S_MODE(hi2s->Init.Mode));
+ assert_param(IS_I2S_STANDARD(hi2s->Init.Standard));
+ assert_param(IS_I2S_DATA_FORMAT(hi2s->Init.DataFormat));
+ assert_param(IS_I2S_MCLK_OUTPUT(hi2s->Init.MCLKOutput));
+ assert_param(IS_I2S_AUDIO_FREQ(hi2s->Init.AudioFreq));
+ assert_param(IS_I2S_CPOL(hi2s->Init.CPOL));
+
+ if(hi2s->State == HAL_I2S_STATE_RESET)
+ {
+ /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */
+ HAL_I2S_MspInit(hi2s);
+ }
+
+ hi2s->State = HAL_I2S_STATE_BUSY;
+
+ /*----------------------- SPIx I2SCFGR & I2SPR Configuration ---------------*/
+ /* Clear I2SMOD, I2SE, I2SCFG, PCMSYNC, I2SSTD, CKPOL, DATLEN and CHLEN bits */
+ hi2s->Instance->I2SCFGR &= (uint16_t)(~(SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CKPOL | \
+ SPI_I2SCFGR_I2SSTD | SPI_I2SCFGR_PCMSYNC | SPI_I2SCFGR_I2SCFG | \
+ SPI_I2SCFGR_I2SE | SPI_I2SCFGR_I2SMOD));
+ hi2s->Instance->I2SPR = 0x0002;
+
+ /* Get the I2SCFGR register value */
+ tmpreg = hi2s->Instance->I2SCFGR;
+
+ /* If the default value has to be written, reinitialize i2sdiv and i2sodd*/
+ if(hi2s->Init.AudioFreq == I2S_AUDIOFREQ_DEFAULT)
+ {
+ i2sodd = (uint16_t)0;
+ i2sdiv = (uint16_t)2;
+ }
+ /* If the requested audio frequency is not the default, compute the prescaler */
+ else
+ {
+ /* Check the frame length (For the Prescaler computing) *******************/
+ if(hi2s->Init.DataFormat == I2S_DATAFORMAT_16B)
+ {
+ /* Packet length is 16 bits */
+ packetlength = 1;
+ }
+ else
+ {
+ /* Packet length is 32 bits */
+ packetlength = 2;
+ }
+
+ /* Get I2S source Clock frequency ****************************************/
+ i2sclk = HAL_RCC_GetSysClockFreq();
+
+ /* Compute the Real divider depending on the MCLK output state, with a floating point */
+ if(hi2s->Init.MCLKOutput == I2S_MCLKOUTPUT_ENABLE)
+ {
+ /* MCLK output is enabled */
+ tmp = (uint32_t)(((((i2sclk / 256) * 10) / hi2s->Init.AudioFreq)) + 5);
+ }
+ else
+ {
+ /* MCLK output is disabled */
+ tmp = (uint32_t)(((((i2sclk / (32 * packetlength)) *10 ) / hi2s->Init.AudioFreq)) + 5);
+ }
+
+ /* Remove the flatting point */
+ tmp = tmp / 10;
+
+ /* Check the parity of the divider */
+ i2sodd = (uint32_t)(tmp & (uint32_t)1);
+
+ /* Compute the i2sdiv prescaler */
+ i2sdiv = (uint32_t)((tmp - i2sodd) / 2);
+
+ /* Get the Mask for the Odd bit (SPI_I2SPR[8]) register */
+ i2sodd = (uint32_t) (i2sodd << 8);
+ }
+
+ /* Test if the divider is 1 or 0 or greater than 0xFF */
+ if((i2sdiv < 2) || (i2sdiv > 0xFF))
+ {
+ /* Set the default values */
+ i2sdiv = 2;
+ i2sodd = 0;
+ }
+
+ /* Write to SPIx I2SPR register the computed value */
+ hi2s->Instance->I2SPR = (uint32_t)((uint32_t)i2sdiv | (uint32_t)(i2sodd | (uint32_t)hi2s->Init.MCLKOutput));
+
+ /* Configure the I2S with the I2S_InitStruct values */
+ tmpreg |= (uint32_t)(SPI_I2SCFGR_I2SMOD | hi2s->Init.Mode | hi2s->Init.Standard | hi2s->Init.DataFormat | hi2s->Init.CPOL);
+
+ /* Write to SPIx I2SCFGR */
+ hi2s->Instance->I2SCFGR = tmpreg;
+
+ hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
+ hi2s->State= HAL_I2S_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the I2S peripheral
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2S_DeInit(I2S_HandleTypeDef *hi2s)
+{
+ /* Check the I2S handle allocation */
+ if(hi2s == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_I2S_ALL_INSTANCE(hi2s->Instance));
+
+ hi2s->State = HAL_I2S_STATE_BUSY;
+
+ /* Disable the I2S Peripheral Clock */
+ __HAL_I2S_DISABLE(hi2s);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */
+ HAL_I2S_MspDeInit(hi2s);
+
+ hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
+ hi2s->State = HAL_I2S_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief I2S MSP Init
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval None
+ */
+ __weak void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_I2S_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief I2S MSP DeInit
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval None
+ */
+ __weak void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_I2S_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Exported_Functions_Group2 IO operation functions
+ * @brief Data transfers functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the I2S data
+ transfers.
+
+ (#) There are two modes of transfer:
+ (++) Blocking mode : The communication is performed in the polling mode.
+ The status of all data processing is returned by the same function
+ after finishing transfer.
+ (++) No-Blocking mode : The communication is performed using Interrupts
+ or DMA. These functions return the status of the transfer startup.
+ The end of the data processing will be indicated through the
+ dedicated I2S IRQ when using Interrupt mode or the DMA IRQ when
+ using DMA mode.
+
+ (#) Blocking mode functions are :
+ (++) HAL_I2S_Transmit()
+ (++) HAL_I2S_Receive()
+
+ (#) No-Blocking mode functions with Interrupt are :
+ (++) HAL_I2S_Transmit_IT()
+ (++) HAL_I2S_Receive_IT()
+
+ (#) No-Blocking mode functions with DMA are :
+ (++) HAL_I2S_Transmit_DMA()
+ (++) HAL_I2S_Receive_DMA()
+
+ (#) A set of Transfer Complete Callbacks are provided in non Blocking mode:
+ (++) HAL_I2S_TxCpltCallback()
+ (++) HAL_I2S_RxCpltCallback()
+ (++) HAL_I2S_ErrorCallback()
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Transmit an amount of data in blocking mode
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @param pData: a 16-bit pointer to data buffer.
+ * @param Size: number of data sample to be sent:
+ * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
+ * configuration phase, the Size parameter means the number of 16-bit data length
+ * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
+ * the Size parameter means the number of 16-bit data length.
+ * @param Timeout: Timeout duration
+ * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
+ * between Master and Slave(example: audio streaming).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ if((pData == NULL ) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2s);
+
+ if(hi2s->State == HAL_I2S_STATE_READY)
+ {
+ if(((hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN)) == I2S_DATAFORMAT_24B)||\
+ ((hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN)) == I2S_DATAFORMAT_32B))
+ {
+ hi2s->TxXferSize = (Size << 1);
+ hi2s->TxXferCount = (Size << 1);
+ }
+ else
+ {
+ hi2s->TxXferSize = Size;
+ hi2s->TxXferCount = Size;
+ }
+
+ /* Set state and reset error code */
+ hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
+ hi2s->State = HAL_I2S_STATE_BUSY_TX;
+ hi2s->pTxBuffPtr = pData;
+
+ /* Check if the I2S is already enabled */
+ if((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+ {
+ /* Enable I2S peripheral */
+ __HAL_I2S_ENABLE(hi2s);
+ }
+
+ while(hi2s->TxXferCount > 0)
+ {
+ /* Wait until TXE flag is set */
+ if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_TXE, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ hi2s->Instance->DR = (*hi2s->pTxBuffPtr++);
+ hi2s->TxXferCount--;
+ }
+
+ /* Wait until TXE flag is set, to confirm the end of the transcation */
+ if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_TXE, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ /* Wait until Busy flag is reset */
+ if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_BSY, SET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ hi2s->State = HAL_I2S_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_OK;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data in blocking mode
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @param pData: a 16-bit pointer to data buffer.
+ * @param Size: number of data sample to be sent:
+ * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
+ * configuration phase, the Size parameter means the number of 16-bit data length
+ * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
+ * the Size parameter means the number of 16-bit data length.
+ * @param Timeout: Timeout duration
+ * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
+ * between Master and Slave(example: audio streaming).
+ * @note In I2S Master Receiver mode, just after enabling the peripheral the clock will be generate
+ * in continouse way and as the I2S is not disabled at the end of the I2S transaction.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ if((pData == NULL ) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2s);
+
+ if(hi2s->State == HAL_I2S_STATE_READY)
+ {
+ if(((hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN)) == I2S_DATAFORMAT_24B)||\
+ ((hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN)) == I2S_DATAFORMAT_32B))
+ {
+ hi2s->RxXferSize = (Size << 1);
+ hi2s->RxXferCount = (Size << 1);
+ }
+ else
+ {
+ hi2s->RxXferSize = Size;
+ hi2s->RxXferCount = Size;
+ }
+
+ /* Set state and reset error code */
+ hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
+ hi2s->State = HAL_I2S_STATE_BUSY_RX;
+ hi2s->pRxBuffPtr = pData;
+
+ /* Check if the I2S is already enabled */
+ if((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+ {
+ /* Enable I2S peripheral */
+ __HAL_I2S_ENABLE(hi2s);
+ }
+
+ /* Receive data */
+ while(hi2s->RxXferCount > 0)
+ {
+ /* Wait until RXNE flag is set */
+ if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ (*hi2s->pRxBuffPtr++) = hi2s->Instance->DR;
+ hi2s->RxXferCount--;
+ }
+
+ hi2s->State = HAL_I2S_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_OK;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmit an amount of data in non-blocking mode with Interrupt
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @param pData: a 16-bit pointer to data buffer.
+ * @param Size: number of data sample to be sent:
+ * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
+ * configuration phase, the Size parameter means the number of 16-bit data length
+ * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
+ * the Size parameter means the number of 16-bit data length.
+ * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
+ * between Master and Slave(example: audio streaming).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size)
+{
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2s);
+
+ if(hi2s->State == HAL_I2S_STATE_READY)
+ {
+ hi2s->pTxBuffPtr = pData;
+ hi2s->State = HAL_I2S_STATE_BUSY_TX;
+ hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
+
+ if(((hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN)) == I2S_DATAFORMAT_24B)||\
+ ((hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN)) == I2S_DATAFORMAT_32B))
+ {
+ hi2s->TxXferSize = (Size << 1);
+ hi2s->TxXferCount = (Size << 1);
+ }
+ else
+ {
+ hi2s->TxXferSize = Size;
+ hi2s->TxXferCount = Size;
+ }
+
+ /* Enable TXE and ERR interrupt */
+ __HAL_I2S_ENABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR));
+
+ /* Check if the I2S is already enabled */
+ if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+ {
+ /* Enable I2S peripheral */
+ __HAL_I2S_ENABLE(hi2s);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_OK;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data in non-blocking mode with Interrupt
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @param pData: a 16-bit pointer to the Receive data buffer.
+ * @param Size: number of data sample to be sent:
+ * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
+ * configuration phase, the Size parameter means the number of 16-bit data length
+ * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
+ * the Size parameter means the number of 16-bit data length.
+ * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
+ * between Master and Slave(example: audio streaming).
+ * @note It is recommended to use DMA for the I2S receiver to avoid de-synchronisation
+ * between Master and Slave otherwise the I2S interrupt should be optimized.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size)
+{
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2s);
+
+ if(hi2s->State == HAL_I2S_STATE_READY)
+ {
+ hi2s->pRxBuffPtr = pData;
+ hi2s->State = HAL_I2S_STATE_BUSY_RX;
+ hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
+
+ if(((hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN)) == I2S_DATAFORMAT_24B)||\
+ ((hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN)) == I2S_DATAFORMAT_32B))
+ {
+ hi2s->RxXferSize = (Size << 1);
+ hi2s->RxXferCount = (Size << 1);
+ }
+ else
+ {
+ hi2s->RxXferSize = Size;
+ hi2s->RxXferCount = Size;
+ }
+
+ /* Enable TXE and ERR interrupt */
+ __HAL_I2S_ENABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR));
+
+ /* Check if the I2S is already enabled */
+ if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+ {
+ /* Enable I2S peripheral */
+ __HAL_I2S_ENABLE(hi2s);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_OK;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmit an amount of data in non-blocking mode with DMA
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @param pData: a 16-bit pointer to the Transmit data buffer.
+ * @param Size: number of data sample to be sent:
+ * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
+ * configuration phase, the Size parameter means the number of 16-bit data length
+ * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
+ * the Size parameter means the number of 16-bit data length.
+ * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
+ * between Master and Slave(example: audio streaming).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size)
+{
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2s);
+
+ if(hi2s->State == HAL_I2S_STATE_READY)
+ {
+ hi2s->pTxBuffPtr = pData;
+ hi2s->State = HAL_I2S_STATE_BUSY_TX;
+ hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
+
+ if(((hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN)) == I2S_DATAFORMAT_24B)||\
+ ((hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN)) == I2S_DATAFORMAT_32B))
+ {
+ hi2s->TxXferSize = (Size << 1);
+ hi2s->TxXferCount = (Size << 1);
+ }
+ else
+ {
+ hi2s->TxXferSize = Size;
+ hi2s->TxXferCount = Size;
+ }
+
+ /* Set the I2S Tx DMA Half transfert complete callback */
+ hi2s->hdmatx->XferHalfCpltCallback = I2S_DMATxHalfCplt;
+
+ /* Set the I2S Tx DMA transfert complete callback */
+ hi2s->hdmatx->XferCpltCallback = I2S_DMATxCplt;
+
+ /* Set the DMA error callback */
+ hi2s->hdmatx->XferErrorCallback = I2S_DMAError;
+
+ /* Enable the Tx DMA Channel */
+ HAL_DMA_Start_IT(hi2s->hdmatx, (uint32_t)hi2s->pTxBuffPtr, (uint32_t)&hi2s->Instance->DR, hi2s->TxXferSize);
+
+ /* Check if the I2S is already enabled */
+ if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+ {
+ /* Enable I2S peripheral */
+ __HAL_I2S_ENABLE(hi2s);
+ }
+
+ /* Check if the I2S Tx request is already enabled */
+ if((hi2s->Instance->CR2 & SPI_CR2_TXDMAEN) != SPI_CR2_TXDMAEN)
+ {
+ /* Enable Tx DMA Request */
+ hi2s->Instance->CR2 |= SPI_CR2_TXDMAEN;
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_OK;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data in non-blocking mode with DMA
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @param pData: a 16-bit pointer to the Receive data buffer.
+ * @param Size: number of data sample to be sent:
+ * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
+ * configuration phase, the Size parameter means the number of 16-bit data length
+ * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
+ * the Size parameter means the number of 16-bit data length.
+ * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
+ * between Master and Slave(example: audio streaming).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size)
+{
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2s);
+
+ if(hi2s->State == HAL_I2S_STATE_READY)
+ {
+ hi2s->pRxBuffPtr = pData;
+ hi2s->State = HAL_I2S_STATE_BUSY_RX;
+ hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
+
+ if(((hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN)) == I2S_DATAFORMAT_24B)||\
+ ((hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN)) == I2S_DATAFORMAT_32B))
+ {
+ hi2s->RxXferSize = (Size << 1);
+ hi2s->RxXferCount = (Size << 1);
+ }
+ else
+ {
+ hi2s->RxXferSize = Size;
+ hi2s->RxXferCount = Size;
+ }
+
+
+ /* Set the I2S Rx DMA Half transfert complete callback */
+ hi2s->hdmarx->XferHalfCpltCallback = I2S_DMARxHalfCplt;
+
+ /* Set the I2S Rx DMA transfert complete callback */
+ hi2s->hdmarx->XferCpltCallback = I2S_DMARxCplt;
+
+ /* Set the DMA error callback */
+ hi2s->hdmarx->XferErrorCallback = I2S_DMAError;
+
+ /* Check if Master Receiver mode is selected */
+ if((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX)
+ {
+ /* Clear the Overrun Flag by a read operation to the SPI_DR register followed by a read
+ access to the SPI_SR register. */
+ __HAL_I2S_CLEAR_OVRFLAG(hi2s);
+ }
+
+ /* Enable the Rx DMA Channel */
+ HAL_DMA_Start_IT(hi2s->hdmarx, (uint32_t)&hi2s->Instance->DR, (uint32_t)hi2s->pRxBuffPtr, hi2s->RxXferSize);
+
+ /* Check if the I2S is already enabled */
+ if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+ {
+ /* Enable I2S peripheral */
+ __HAL_I2S_ENABLE(hi2s);
+ }
+
+ /* Check if the I2S Rx request is already enabled */
+ if((hi2s->Instance->CR2 &SPI_CR2_RXDMAEN) != SPI_CR2_RXDMAEN)
+ {
+ /* Enable Rx DMA Request */
+ hi2s->Instance->CR2 |= SPI_CR2_RXDMAEN;
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_OK;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Pauses the audio stream playing from the Media.
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s)
+{
+ /* Process Locked */
+ __HAL_LOCK(hi2s);
+
+ if(hi2s->State == HAL_I2S_STATE_BUSY_TX)
+ {
+ /* Disable the I2S DMA Tx request */
+ hi2s->Instance->CR2 &= (uint16_t)(~SPI_CR2_TXDMAEN);
+ }
+ else if(hi2s->State == HAL_I2S_STATE_BUSY_RX)
+ {
+ /* Disable the I2S DMA Rx request */
+ hi2s->Instance->CR2 &= (uint16_t)(~SPI_CR2_RXDMAEN);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Resumes the audio stream playing from the Media.
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s)
+{
+ /* Process Locked */
+ __HAL_LOCK(hi2s);
+
+ if(hi2s->State == HAL_I2S_STATE_BUSY_TX)
+ {
+ /* Enable the I2S DMA Tx request */
+ hi2s->Instance->CR2 |= SPI_CR2_TXDMAEN;
+ }
+ else if(hi2s->State == HAL_I2S_STATE_BUSY_RX)
+ {
+ /* Enable the I2S DMA Rx request */
+ hi2s->Instance->CR2 |= SPI_CR2_RXDMAEN;
+ }
+
+ /* If the I2S peripheral is still not enabled, enable it */
+ if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) == 0)
+ {
+ /* Enable I2S peripheral */
+ __HAL_I2S_ENABLE(hi2s);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Resumes the audio stream playing from the Media.
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s)
+{
+ /* Process Locked */
+ __HAL_LOCK(hi2s);
+
+ /* Disable the I2S Tx/Rx DMA requests */
+ hi2s->Instance->CR2 &= (uint16_t)(~SPI_CR2_TXDMAEN);
+ hi2s->Instance->CR2 &= (uint16_t)(~SPI_CR2_RXDMAEN);
+
+ /* Disable the I2S DMA channel */
+ __HAL_DMA_DISABLE(hi2s->hdmatx);
+ __HAL_DMA_DISABLE(hi2s->hdmarx);
+
+ /* Abort the I2S DMA tx channel */
+ if(hi2s->hdmatx != NULL)
+ {
+ HAL_DMA_Abort(hi2s->hdmatx);
+ }
+ /* Abort the I2S DMA rx channel */
+ if(hi2s->hdmarx != NULL)
+ {
+ HAL_DMA_Abort(hi2s->hdmarx);
+ }
+
+ /* Disable I2S peripheral */
+ __HAL_I2S_DISABLE(hi2s);
+
+ hi2s->State = HAL_I2S_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles I2S interrupt request.
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval None
+ */
+void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s)
+{
+ uint32_t i2ssr = hi2s->Instance->SR;
+
+ /* I2S in mode Receiver ------------------------------------------------*/
+ if(((i2ssr & I2S_FLAG_OVR) != I2S_FLAG_OVR) &&
+ ((i2ssr & I2S_FLAG_RXNE) == I2S_FLAG_RXNE) && (__HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_RXNE) != RESET))
+ {
+ I2S_Receive_IT(hi2s);
+ return;
+ }
+
+ /* I2S in mode Tramitter -----------------------------------------------*/
+ if(((i2ssr & I2S_FLAG_TXE) == I2S_FLAG_TXE) && (__HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_TXE) != RESET))
+ {
+ I2S_Transmit_IT(hi2s);
+ return;
+ }
+
+ /* I2S Overrun error interrupt occured ---------------------------------*/
+ if(((i2ssr & I2S_FLAG_OVR) == I2S_FLAG_OVR) && (__HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_ERR) != RESET))
+ {
+ /* Disable RXNE and ERR interrupt */
+ __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR));
+
+ /* Set the I2S State ready */
+ hi2s->State = HAL_I2S_STATE_READY;
+
+ /* Set the error code and execute error callback*/
+ hi2s->ErrorCode |= HAL_I2S_ERROR_OVR;
+ HAL_I2S_ErrorCallback(hi2s);
+ }
+
+ /* I2S Underrun error interrupt occured --------------------------------*/
+ if(((i2ssr & I2S_FLAG_UDR) == I2S_FLAG_UDR) && (__HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_ERR) != RESET))
+ {
+ /* Disable TXE and ERR interrupt */
+ __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR));
+
+ /* Set the I2S State ready */
+ hi2s->State = HAL_I2S_STATE_READY;
+
+ /* Set the error code and execute error callback*/
+ hi2s->ErrorCode |= HAL_I2S_ERROR_UDR;
+ HAL_I2S_ErrorCallback(hi2s);
+ }
+}
+
+/**
+ * @brief Tx Transfer Half completed callbacks
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval None
+ */
+ __weak void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_I2S_TxHalfCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Tx Transfer completed callbacks
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval None
+ */
+ __weak void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_I2S_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Transfer half completed callbacks
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval None
+ */
+__weak void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_I2S_RxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Transfer completed callbacks
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval None
+ */
+__weak void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_I2S_RxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief I2S error callbacks
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval None
+ */
+ __weak void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_I2S_ErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Exported_Functions_Group3 Peripheral State and Errors functions
+ * @brief Peripheral State functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral State and Errors functions #####
+ ===============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the I2S state
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval HAL state
+ */
+HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s)
+{
+ return hi2s->State;
+}
+
+/**
+ * @brief Return the I2S error code
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval I2S Error Code
+ */
+uint32_t HAL_I2S_GetError(I2S_HandleTypeDef *hi2s)
+{
+ return hi2s->ErrorCode;
+}
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup I2S_Private_Functions I2S Private Functions
+ * @{
+ */
+/**
+ * @brief DMA I2S transmit process complete callback
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void I2S_DMATxCplt(DMA_HandleTypeDef *hdma)
+{
+ I2S_HandleTypeDef* hi2s = (I2S_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ if((hdma->Instance->CCR & DMA_CCR_CIRC) == 0)
+ {
+ /* Disable Tx DMA Request */
+ hi2s->Instance->CR2 &= (uint16_t)(~SPI_CR2_TXDMAEN);
+
+ hi2s->TxXferCount = 0;
+ hi2s->State = HAL_I2S_STATE_READY;
+ }
+ HAL_I2S_TxCpltCallback(hi2s);
+}
+
+/**
+ * @brief DMA I2S transmit process half complete callback
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void I2S_DMATxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+ I2S_HandleTypeDef* hi2s = (I2S_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ HAL_I2S_TxHalfCpltCallback(hi2s);
+}
+
+/**
+ * @brief DMA I2S receive process complete callback
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void I2S_DMARxCplt(DMA_HandleTypeDef *hdma)
+{
+ I2S_HandleTypeDef* hi2s = ( I2S_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ if((hdma->Instance->CCR & DMA_CCR_CIRC) == 0)
+ {
+ /* Disable Rx DMA Request */
+ hi2s->Instance->CR2 &= (uint16_t)(~SPI_CR2_RXDMAEN);
+ hi2s->RxXferCount = 0;
+ hi2s->State = HAL_I2S_STATE_READY;
+ }
+ HAL_I2S_RxCpltCallback(hi2s);
+}
+
+/**
+ * @brief DMA I2S receive process half complete callback
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void I2S_DMARxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+ I2S_HandleTypeDef* hi2s = (I2S_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ HAL_I2S_RxHalfCpltCallback(hi2s);
+}
+
+/**
+ * @brief DMA I2S communication error callback
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void I2S_DMAError(DMA_HandleTypeDef *hdma)
+{
+ I2S_HandleTypeDef* hi2s = ( I2S_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ /* Disable Rx and Tx DMA Request */
+ hi2s->Instance->CR2 &= (uint16_t)(~(SPI_CR2_RXDMAEN | SPI_CR2_TXDMAEN));
+ hi2s->TxXferCount = 0;
+ hi2s->RxXferCount = 0;
+
+ hi2s->State= HAL_I2S_STATE_READY;
+
+ /* Set the error code and execute error callback*/
+ hi2s->ErrorCode |= HAL_I2S_ERROR_DMA;
+ HAL_I2S_ErrorCallback(hi2s);
+}
+
+/**
+ * @brief Transmit an amount of data in non-blocking mode with Interrupt
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval None
+ */
+static void I2S_Transmit_IT(I2S_HandleTypeDef *hi2s)
+{
+ /* Transmit data */
+ hi2s->Instance->DR = (*hi2s->pTxBuffPtr++);
+ hi2s->TxXferCount--;
+
+ if(hi2s->TxXferCount == 0)
+ {
+ /* Disable TXE and ERR interrupt */
+ __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR));
+
+ hi2s->State = HAL_I2S_STATE_READY;
+ HAL_I2S_TxCpltCallback(hi2s);
+ }
+}
+
+/**
+* @brief Receive an amount of data in non-blocking mode with Interrupt
+* @param hi2s: I2S handle
+ * @retval None
+*/
+static void I2S_Receive_IT(I2S_HandleTypeDef *hi2s)
+{
+ /* Receive data */
+ (*hi2s->pRxBuffPtr++) = hi2s->Instance->DR;
+ hi2s->RxXferCount--;
+
+ if(hi2s->RxXferCount == 0)
+ {
+ /* Disable RXNE and ERR interrupt */
+ __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR));
+
+ hi2s->State = HAL_I2S_STATE_READY;
+ HAL_I2S_RxCpltCallback(hi2s);
+ }
+}
+
+
+/**
+ * @brief This function handles I2S Communication Timeout.
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @param Flag: Flag checked
+ * @param State: Value of the flag expected
+ * @param Timeout: Duration of the timeout
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2S_WaitFlagStateUntilTimeout(I2S_HandleTypeDef *hi2s, uint32_t Flag, uint32_t State, uint32_t Timeout)
+{
+ uint32_t tickstart = HAL_GetTick();
+
+ /* Wait until flag is set */
+ if(State == RESET)
+ {
+ while(__HAL_I2S_GET_FLAG(hi2s, Flag) == RESET)
+ {
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0) || ((HAL_GetTick() - tickstart) > Timeout))
+ {
+ /* Set the I2S State ready */
+ hi2s->State= HAL_I2S_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ else
+ {
+ while(__HAL_I2S_GET_FLAG(hi2s, Flag) != RESET)
+ {
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0) || ((HAL_GetTick() - tickstart) > Timeout))
+ {
+ /* Set the I2S State ready */
+ hi2s->State= HAL_I2S_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined(STM32F031x6) || defined(STM32F038xx) || */
+ /* defined(STM32F051x8) || defined(STM32F058xx) || */
+ /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || */
+ /* defined(STM32F042x6) || defined(STM32F048xx) || */
+ /* defined(STM32F091xC) || defined(STM32F098xx) */
+
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/src/stm32f0xx_hal_irda.c b/f0/src/stm32f0xx_hal_irda.c
new file mode 100755
index 0000000000000000000000000000000000000000..d95d82b94e844dcd19dc555c281d9a7c116fda79
--- /dev/null
+++ b/f0/src/stm32f0xx_hal_irda.c
@@ -0,0 +1,1363 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_irda.c
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief IRDA HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the IrDA (Infrared Data Association) Peripheral
+ * (IRDA)
+ * + Initialization and de-initialization function
+ * + IO operation function
+ * + Peripheral Control function
+ *
+ *
+ @verbatim
+ ===============================================================================
+ ##### How to use this driver #####
+ ===============================================================================
+ [..]
+ The IRDA HAL driver can be used as follows:
+
+ (#) Declare a IRDA_HandleTypeDef handle structure.
+ (#) Initialize the IRDA low level resources by implementing the HAL_IRDA_MspInit() API:
+ (##) Enable the USARTx interface clock.
+ (##) IRDA pins configuration:
+ (+++) Enable the clock for the IRDA GPIOs.
+ (+++) Configure these IRDA pins as alternate function pull-up.
+ (##) NVIC configuration if you need to use interrupt process (HAL_IRDA_Transmit_IT()
+ and HAL_IRDA_Receive_IT() APIs):
+ (+++) Configure the USARTx interrupt priority.
+ (+++) Enable the NVIC USART IRQ handle.
+ (##) DMA Configuration if you need to use DMA process (HAL_IRDA_Transmit_DMA()
+ and HAL_IRDA_Receive_DMA() APIs):
+ (+++) Declare a DMA handle structure for the Tx/Rx channel.
+ (+++) Enable the DMAx interface clock.
+ (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters.
+ (+++) Configure the DMA Tx/Rx channel.
+ (+++) Associate the initilalized DMA handle to the IRDA DMA Tx/Rx handle.
+ (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx/Rx channel.
+
+ (#) Program the Baud Rate, Word Length and Parity and Mode(Receiver/Transmitter),
+ the normal or low power mode and the clock prescaler in the hirda Init structure.
+
+ (#) Initialize the IRDA registers by calling the HAL_IRDA_Init() API:
+ (++) This API configures also the low level Hardware (GPIO, CLOCK, CORTEX...etc)
+ by calling the customed HAL_IRDA_MspInit() API.
+
+ -@@- The specific IRDA interrupts (Transmission complete interrupt,
+ RXNE interrupt and Error Interrupts) will be managed using the macros
+ __HAL_IRDA_ENABLE_IT() and __HAL_IRDA_DISABLE_IT() inside the transmit and receive process.
+
+ (#) Three operation modes are available within this driver :
+
+ *** Polling mode IO operation ***
+ =================================
+ [..]
+ (+) Send an amount of data in blocking mode using HAL_IRDA_Transmit()
+ (+) Receive an amount of data in blocking mode using HAL_IRDA_Receive()
+
+ *** Interrupt mode IO operation ***
+ ===================================
+ [..]
+ (+) Send an amount of data in non blocking mode using HAL_IRDA_Transmit_IT()
+ (+) At transmission end of transfer HAL_IRDA_TxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_IRDA_TxCpltCallback
+ (+) Receive an amount of data in non blocking mode using HAL_IRDA_Receive_IT()
+ (+) At reception end of transfer HAL_IRDA_RxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_IRDA_RxCpltCallback
+ (+) In case of transfer Error, HAL_IRDA_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_IRDA_ErrorCallback
+
+ *** DMA mode IO operation ***
+ ==============================
+ [..]
+ (+) Send an amount of data in non blocking mode (DMA) using HAL_IRDA_Transmit_DMA()
+ (+) At transmission end of transfer HAL_IRDA_TxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_IRDA_TxCpltCallback
+ (+) Receive an amount of data in non blocking mode (DMA) using HAL_IRDA_Receive_DMA()
+ (+) At reception end of transfer HAL_IRDA_RxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_IRDA_RxCpltCallback
+ (+) In case of transfer Error, HAL_IRDA_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_IRDA_ErrorCallback
+
+ *** IRDA HAL driver macros list ***
+ ====================================
+ [..]
+ Below the list of most used macros in IRDA HAL driver.
+
+ (+) __HAL_IRDA_ENABLE: Enable the IRDA peripheral
+ (+) __HAL_IRDA_DISABLE: Disable the IRDA peripheral
+ (+) __HAL_IRDA_GET_FLAG : Check whether the specified IRDA flag is set or not
+ (+) __HAL_IRDA_CLEAR_FLAG : Clear the specified IRDA pending flag
+ (+) __HAL_IRDA_ENABLE_IT: Enable the specified IRDA interrupt
+ (+) __HAL_IRDA_DISABLE_IT: Disable the specified IRDA interrupt
+
+ [..]
+ (@) You can refer to the IRDA HAL driver header file for more useful macros
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup IRDA IRDA HAL module driver
+ * @brief HAL IRDA module driver
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup IRDA_Private_Constants IRDA Private Constants
+ * @{
+ */
+#define TEACK_REACK_TIMEOUT 1000
+#define IRDA_TXDMA_TIMEOUTVALUE 22000
+#define IRDA_TIMEOUT_VALUE 22000
+#define IRDA_CR1_FIELDS ((uint32_t)(USART_CR1_M | USART_CR1_PCE \
+ | USART_CR1_PS | USART_CR1_TE | USART_CR1_RE))
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup IRDA_Private_Functions IRDA Private Functions
+ * @{
+ */
+static void IRDA_DMATransmitCplt(DMA_HandleTypeDef *hdma);
+static void IRDA_DMAReceiveCplt(DMA_HandleTypeDef *hdma);
+static void IRDA_DMAError(DMA_HandleTypeDef *hdma);
+static HAL_StatusTypeDef IRDA_SetConfig(IRDA_HandleTypeDef *hirda);
+static HAL_StatusTypeDef IRDA_CheckIdleState(IRDA_HandleTypeDef *hirda);
+static HAL_StatusTypeDef IRDA_WaitOnFlagUntilTimeout(IRDA_HandleTypeDef *hirda, uint32_t Flag, FlagStatus Status, uint32_t Timeout);
+static HAL_StatusTypeDef IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda);
+static HAL_StatusTypeDef IRDA_EndTransmit_IT(IRDA_HandleTypeDef *hirda);
+static HAL_StatusTypeDef IRDA_Receive_IT(IRDA_HandleTypeDef *hirda);
+/**
+ * @}
+ */
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup IRDA_Exported_Functions IRDA Exported Functions
+ * @{
+ */
+
+/** @defgroup IRDA_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Initialization and Configuration functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to initialize the USARTx
+ in IRDA mode.
+ (+) For the asynchronous mode only these parameters can be configured:
+ (++) Baud Rate
+ (++) Word Length
+ (++) Parity: If the parity is enabled, then the MSB bit of the data written
+ in the data register is transmitted but is changed by the parity bit.
+ Depending on the frame length defined by the M bit (8-bits or 9-bits)
+ or by the M1 and M0 bits (7-bit, 8-bit or 9-bit),
+ the possible IRDA frame formats are as listed in the following table:
+ +---------------------------------------------------------------+
+ | M bit | PCE bit | IRDA frame |
+ |-----------|-----------|---------------------------------------|
+ | 0 | 0 | | SB | 8-bit data | STB | |
+ |-----------|-----------|---------------------------------------|
+ | 0 | 1 | | SB | 7-bit data | PB | STB | |
+ |-----------|-----------|---------------------------------------|
+ | 1 | 0 | | SB | 9-bit data | STB | |
+ |-----------|-----------|---------------------------------------|
+ | 1 | 1 | | SB | 8-bit data | PB | STB | |
+ +---------------------------------------------------------------+
+ | M1M0 bits | PCE bit | IRDA frame |
+ |-----------------------|---------------------------------------|
+ | 10 | 0 | | SB | 7-bit data | STB | |
+ |-----------|-----------|---------------------------------------|
+ | 10 | 1 | | SB | 6-bit data | PB | STB | |
+ +---------------------------------------------------------------+
+
+ (++) Power mode
+ (++) Prescaler setting
+ (++) Receiver/transmitter modes
+
+ [..]
+ The HAL_IRDA_Init() function follows IRDA configuration procedures
+ (details for the procedures are available in reference manual).
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the IRDA mode according to the specified
+ * parameters in the IRDA_InitTypeDef and creates the associated handle .
+ * @param hirda: IRDA handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_IRDA_Init(IRDA_HandleTypeDef *hirda)
+{
+ /* Check the IRDA handle allocation */
+ if(hirda == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the USART/UART associated to the IRDA handle */
+ assert_param(IS_IRDA_INSTANCE(hirda->Instance));
+
+ if(hirda->State == HAL_IRDA_STATE_RESET)
+ {
+ /* Init the low level hardware : GPIO, CLOCK */
+ HAL_IRDA_MspInit(hirda);
+ }
+
+ hirda->State = HAL_IRDA_STATE_BUSY;
+
+ /* Disable the Peripheral to update the configuration registers */
+ __HAL_IRDA_DISABLE(hirda);
+
+ /* Set the IRDA Communication parameters */
+ if (IRDA_SetConfig(hirda) == HAL_ERROR)
+ {
+ return HAL_ERROR;
+ }
+
+ /* In IRDA mode, the following bits must be kept cleared:
+ - LINEN, STOP and CLKEN bits in the USART_CR2 register,
+ - SCEN and HDSEL bits in the USART_CR3 register.*/
+ hirda->Instance->CR2 &= ~(USART_CR2_LINEN | USART_CR2_CLKEN | USART_CR2_STOP);
+ hirda->Instance->CR3 &= ~(USART_CR3_SCEN | USART_CR3_HDSEL);
+
+ /* set the UART/USART in IRDA mode */
+ hirda->Instance->CR3 |= USART_CR3_IREN;
+
+ /* Enable the Peripheral */
+ __HAL_IRDA_ENABLE(hirda);
+
+ /* TEACK and/or REACK to check before moving hirda->State to Ready */
+ return (IRDA_CheckIdleState(hirda));
+}
+
+/**
+ * @brief DeInitializes the IRDA peripheral
+ * @param hirda: IRDA handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_IRDA_DeInit(IRDA_HandleTypeDef *hirda)
+{
+ /* Check the IRDA handle allocation */
+ if(hirda == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the USART/UART associated to the IRDA handle */
+ assert_param(IS_IRDA_INSTANCE(hirda->Instance));
+
+ hirda->State = HAL_IRDA_STATE_BUSY;
+
+ /* DeInit the low level hardware */
+ HAL_IRDA_MspDeInit(hirda);
+ /* Disable the Peripheral */
+ __HAL_IRDA_DISABLE(hirda);
+
+ hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+ hirda->State = HAL_IRDA_STATE_RESET;
+
+ /* Process Unlock */
+ __HAL_UNLOCK(hirda);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief IRDA MSP Init
+ * @param hirda: IRDA handle
+ * @retval None
+ */
+ __weak void HAL_IRDA_MspInit(IRDA_HandleTypeDef *hirda)
+{
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_IRDA_MspInit can be implemented in the user file
+ */
+}
+
+/**
+ * @brief IRDA MSP DeInit
+ * @param hirda: IRDA handle
+ * @retval None
+ */
+ __weak void HAL_IRDA_MspDeInit(IRDA_HandleTypeDef *hirda)
+{
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_IRDA_MspDeInit can be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Exported_Functions_Group2 IO operation functions
+ * @brief IRDA Transmit and Receive functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the IRDA data transfers.
+
+ [..]
+ IrDA is a half duplex communication protocol. If the Transmitter is busy, any data
+ on the IrDA receive line will be ignored by the IrDA decoder and if the Receiver
+ is busy, data on the TX from the USART to IrDA will not be encoded by IrDA.
+ While receiving data, transmission should be avoided as the data to be transmitted
+ could be corrupted.
+
+ (#) There are two modes of transfer:
+ (++) Blocking mode: The communication is performed in polling mode.
+ The HAL status of all data processing is returned by the same function
+ after finishing transfer.
+ (++) Non Blocking mode: The communication is performed using Interrupts
+ or DMA, these API s return the HAL status.
+ The end of the data processing will be indicated through the
+ dedicated IRDA IRQ when using Interrupt mode or the DMA IRQ when
+ using DMA mode.
+ The HAL_IRDA_TxCpltCallback(), HAL_IRDA_RxCpltCallback() user callbacks
+ will be executed respectivelly at the end of the Transmit or Receive process
+ The HAL_IRDA_ErrorCallback() user callback will be executed when a communication error is detected
+
+ (#) Blocking mode API s are :
+ (++) HAL_IRDA_Transmit()
+ (++) HAL_IRDA_Receive()
+
+ (#) Non Blocking mode API s with Interrupt are :
+ (++) HAL_IRDA_Transmit_IT()
+ (++) HAL_IRDA_Receive_IT()
+ (++) HAL_IRDA_IRQHandler()
+ (++) IRDA_Transmit_IT()
+ (++) IRDA_Receive_IT()
+
+ (#) Non Blocking mode functions with DMA are :
+ (++) HAL_IRDA_Transmit_DMA()
+ (++) HAL_IRDA_Receive_DMA()
+
+ (#) A set of Transfer Complete Callbacks are provided in Non Blocking mode:
+ (++) HAL_IRDA_TxCpltCallback()
+ (++) HAL_IRDA_RxCpltCallback()
+ (++) HAL_IRDA_ErrorCallback()
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Send an amount of data in blocking mode
+ * @param hirda: IRDA handle
+ * @param pData: pointer to data buffer
+ * @param Size: amount of data to be sent
+ * @param Timeout: Duration of the timeout
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint16_t* tmp;
+
+ if ((hirda->State == HAL_IRDA_STATE_READY) || (hirda->State == HAL_IRDA_STATE_BUSY_RX))
+ {
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hirda);
+ hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+
+ if(hirda->State == HAL_IRDA_STATE_BUSY_RX)
+ {
+ hirda->State = HAL_IRDA_STATE_BUSY_TX_RX;
+ }
+ else
+ {
+ hirda->State = HAL_IRDA_STATE_BUSY_TX;
+ }
+
+ hirda->TxXferSize = Size;
+ hirda->TxXferCount = Size;
+ while(hirda->TxXferCount > 0)
+ {
+ hirda->TxXferCount--;
+
+ if(IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_TXE, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE))
+ {
+ tmp = (uint16_t*) pData;
+ hirda->Instance->TDR = (*tmp & (uint16_t)0x01FF);
+ pData += 2;
+ }
+ else
+ {
+ hirda->Instance->TDR = (*pData++ & (uint8_t)0xFF);
+ }
+ }
+
+ if(IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_TC, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ if(hirda->State == HAL_IRDA_STATE_BUSY_TX_RX)
+ {
+ hirda->State = HAL_IRDA_STATE_BUSY_RX;
+ }
+ else
+ {
+ hirda->State = HAL_IRDA_STATE_READY;
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hirda);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data in blocking mode
+ * @param hirda: IRDA handle
+ * @param pData: pointer to data buffer
+ * @param Size: amount of data to be received
+ * @param Timeout: Duration of the timeout
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_IRDA_Receive(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint16_t* tmp;
+ uint16_t uhMask;
+
+ if ((hirda->State == HAL_IRDA_STATE_READY) || (hirda->State == HAL_IRDA_STATE_BUSY_TX))
+ {
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hirda);
+ hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+
+ if(hirda->State == HAL_IRDA_STATE_BUSY_TX)
+ {
+ hirda->State = HAL_IRDA_STATE_BUSY_TX_RX;
+ }
+ else
+ {
+ hirda->State = HAL_IRDA_STATE_BUSY_RX;
+ }
+
+ hirda->RxXferSize = Size;
+ hirda->RxXferCount = Size;
+
+ /* Computation of the mask to apply to the RDR register
+ of the UART associated to the IRDA */
+ __HAL_IRDA_MASK_COMPUTATION(hirda);
+ uhMask = hirda->Mask;
+
+ /* Check data remaining to be received */
+ while(hirda->RxXferCount > 0)
+ {
+ hirda->RxXferCount--;
+
+ if(IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE))
+ {
+ tmp = (uint16_t*) pData ;
+ *tmp = (uint16_t)(hirda->Instance->RDR & uhMask);
+ pData +=2;
+ }
+ else
+ {
+ *pData++ = (uint8_t)(hirda->Instance->RDR & (uint8_t)uhMask);
+ }
+ }
+
+ if(hirda->State == HAL_IRDA_STATE_BUSY_TX_RX)
+ {
+ hirda->State = HAL_IRDA_STATE_BUSY_TX;
+ }
+ else
+ {
+ hirda->State = HAL_IRDA_STATE_READY;
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hirda);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Send an amount of data in interrupt mode
+ * @param hirda: IRDA handle
+ * @param pData: pointer to data buffer
+ * @param Size: amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size)
+{
+ if ((hirda->State == HAL_IRDA_STATE_READY) || (hirda->State == HAL_IRDA_STATE_BUSY_RX))
+ {
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hirda);
+
+ hirda->pTxBuffPtr = pData;
+ hirda->TxXferSize = Size;
+ hirda->TxXferCount = Size;
+
+ hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+ if(hirda->State == HAL_IRDA_STATE_BUSY_RX)
+ {
+ hirda->State = HAL_IRDA_STATE_BUSY_TX_RX;
+ }
+ else
+ {
+ hirda->State = HAL_IRDA_STATE_BUSY_TX;
+ }
+
+ /* Enable the IRDA Error Interrupt: (Frame error, noise error, overrun error) */
+ __HAL_IRDA_ENABLE_IT(hirda, IRDA_IT_ERR);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hirda);
+
+ /* Enable the IRDA Transmit Data Register Empty Interrupt */
+ __HAL_IRDA_ENABLE_IT(hirda, IRDA_IT_TXE);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data in interrupt mode
+ * @param hirda: IRDA handle
+ * @param pData: pointer to data buffer
+ * @param Size: amount of data to be received
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size)
+{
+ if ((hirda->State == HAL_IRDA_STATE_READY) || (hirda->State == HAL_IRDA_STATE_BUSY_TX))
+ {
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hirda);
+
+ hirda->pRxBuffPtr = pData;
+ hirda->RxXferSize = Size;
+ hirda->RxXferCount = Size;
+
+ /* Computation of the mask to apply to the RDR register
+ of the UART associated to the IRDA */
+ __HAL_IRDA_MASK_COMPUTATION(hirda);
+
+ hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+ if(hirda->State == HAL_IRDA_STATE_BUSY_TX)
+ {
+ hirda->State = HAL_IRDA_STATE_BUSY_TX_RX;
+ }
+ else
+ {
+ hirda->State = HAL_IRDA_STATE_BUSY_RX;
+ }
+
+ /* Enable the IRDA Parity Error Interrupt */
+ __HAL_IRDA_ENABLE_IT(hirda, IRDA_IT_PE);
+
+ /* Enable the IRDA Error Interrupt: (Frame error, noise error, overrun error) */
+ __HAL_IRDA_ENABLE_IT(hirda, IRDA_IT_ERR);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hirda);
+
+ /* Enable the IRDA Data Register not empty Interrupt */
+ __HAL_IRDA_ENABLE_IT(hirda, IRDA_IT_RXNE);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Send an amount of data in DMA mode
+ * @param hirda: IRDA handle
+ * @param pData: pointer to data buffer
+ * @param Size: amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size)
+{
+ uint32_t *tmp;
+
+ if ((hirda->State == HAL_IRDA_STATE_READY) || (hirda->State == HAL_IRDA_STATE_BUSY_RX))
+ {
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hirda);
+
+ hirda->pTxBuffPtr = pData;
+ hirda->TxXferSize = Size;
+ hirda->TxXferCount = Size;
+
+ hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+
+ if(hirda->State == HAL_IRDA_STATE_BUSY_RX)
+ {
+ hirda->State = HAL_IRDA_STATE_BUSY_TX_RX;
+ }
+ else
+ {
+ hirda->State = HAL_IRDA_STATE_BUSY_TX;
+ }
+
+ /* Set the IRDA DMA transfer complete callback */
+ hirda->hdmatx->XferCpltCallback = IRDA_DMATransmitCplt;
+
+ /* Set the DMA error callback */
+ hirda->hdmatx->XferErrorCallback = IRDA_DMAError;
+
+ /* Enable the IRDA transmit DMA channel */
+ tmp = (uint32_t*)&pData;
+ HAL_DMA_Start_IT(hirda->hdmatx, *(uint32_t*)tmp, (uint32_t)&hirda->Instance->TDR, Size);
+
+ /* Enable the DMA transfer for transmit request by setting the DMAT bit
+ in the IRDA CR3 register */
+ hirda->Instance->CR3 |= USART_CR3_DMAT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hirda);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data in DMA mode
+ * @param hirda: IRDA handle
+ * @param pData: pointer to data buffer
+ * @param Size: amount of data to be received
+ * @note When the IRDA parity is enabled (PCE = 1), the received data contain
+ * the parity bit (MSB position)
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size)
+{
+ uint32_t *tmp;
+
+ if ((hirda->State == HAL_IRDA_STATE_READY) || (hirda->State == HAL_IRDA_STATE_BUSY_TX))
+ {
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hirda);
+
+ hirda->pRxBuffPtr = pData;
+ hirda->RxXferSize = Size;
+
+ hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+ if(hirda->State == HAL_IRDA_STATE_BUSY_TX)
+ {
+ hirda->State = HAL_IRDA_STATE_BUSY_TX_RX;
+ }
+ else
+ {
+ hirda->State = HAL_IRDA_STATE_BUSY_RX;
+ }
+
+ /* Set the IRDA DMA transfer complete callback */
+ hirda->hdmarx->XferCpltCallback = IRDA_DMAReceiveCplt;
+
+ /* Set the DMA error callback */
+ hirda->hdmarx->XferErrorCallback = IRDA_DMAError;
+
+ /* Enable the DMA channel */
+ tmp = (uint32_t*)&pData;
+ HAL_DMA_Start_IT(hirda->hdmarx, (uint32_t)&hirda->Instance->RDR, *(uint32_t*)tmp, Size);
+
+ /* Enable the DMA transfer for the receiver request by setting the DMAR bit
+ in the IRDA CR3 register */
+ hirda->Instance->CR3 |= USART_CR3_DMAR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hirda);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief This function handles IRDA interrupt request.
+ * @param hirda: IRDA handle
+ * @retval None
+ */
+void HAL_IRDA_IRQHandler(IRDA_HandleTypeDef *hirda)
+{
+ /* IRDA parity error interrupt occurred -------------------------------------*/
+ if((__HAL_IRDA_GET_IT(hirda, IRDA_IT_PE) != RESET) && (__HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_PE) != RESET))
+ {
+ __HAL_IRDA_CLEAR_IT(hirda, IRDA_CLEAR_PEF);
+
+ hirda->ErrorCode |= HAL_IRDA_ERROR_PE;
+ /* Set the IRDA state ready to be able to start again the process */
+ hirda->State = HAL_IRDA_STATE_READY;
+ }
+
+ /* IRDA frame error interrupt occured --------------------------------------*/
+ if((__HAL_IRDA_GET_IT(hirda, IRDA_IT_FE) != RESET) && (__HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_ERR) != RESET))
+ {
+ __HAL_IRDA_CLEAR_IT(hirda, IRDA_CLEAR_FEF);
+
+ hirda->ErrorCode |= HAL_IRDA_ERROR_FE;
+ /* Set the IRDA state ready to be able to start again the process */
+ hirda->State = HAL_IRDA_STATE_READY;
+ }
+
+ /* IRDA noise error interrupt occured --------------------------------------*/
+ if((__HAL_IRDA_GET_IT(hirda, IRDA_IT_NE) != RESET) && (__HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_ERR) != RESET))
+ {
+ __HAL_IRDA_CLEAR_IT(hirda, IRDA_CLEAR_NEF);
+
+ hirda->ErrorCode |= HAL_IRDA_ERROR_NE;
+ /* Set the IRDA state ready to be able to start again the process */
+ hirda->State = HAL_IRDA_STATE_READY;
+ }
+
+ /* IRDA Over-Run interrupt occured -----------------------------------------*/
+ if((__HAL_IRDA_GET_IT(hirda, IRDA_IT_ORE) != RESET) && (__HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_ERR) != RESET))
+ {
+ __HAL_IRDA_CLEAR_IT(hirda, IRDA_CLEAR_OREF);
+
+ hirda->ErrorCode |= HAL_IRDA_ERROR_ORE;
+ /* Set the IRDA state ready to be able to start again the process */
+ hirda->State = HAL_IRDA_STATE_READY;
+ }
+
+ /* Call IRDA Error Call back function if need be --------------------------*/
+ if(hirda->ErrorCode != HAL_IRDA_ERROR_NONE)
+ {
+ HAL_IRDA_ErrorCallback(hirda);
+ }
+
+ /* IRDA in mode Receiver ---------------------------------------------------*/
+ if((__HAL_IRDA_GET_IT(hirda, IRDA_IT_RXNE) != RESET) && (__HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_RXNE) != RESET))
+ {
+ IRDA_Receive_IT(hirda);
+ /* Clear RXNE interrupt flag */
+ __HAL_IRDA_SEND_REQ(hirda, IRDA_RXDATA_FLUSH_REQUEST);
+ }
+
+
+ /* IRDA in mode Transmitter ------------------------------------------------*/
+ if((__HAL_IRDA_GET_IT(hirda, IRDA_IT_TXE) != RESET) &&(__HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_TXE) != RESET))
+ {
+ IRDA_Transmit_IT(hirda);
+ }
+
+ /* IRDA in mode Transmitter (transmission end) -----------------------------*/
+ if((__HAL_IRDA_GET_IT(hirda, IRDA_IT_TC) != RESET) &&(__HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_TC) != RESET))
+ {
+ IRDA_EndTransmit_IT(hirda);
+ }
+
+}
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup IRDA_Private_Functions IRDA Private Functions
+ * @{
+ */
+
+/**
+ * @brief DMA IRDA Tx transfer completed callback
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void IRDA_DMATransmitCplt(DMA_HandleTypeDef *hdma)
+{
+ IRDA_HandleTypeDef* hirda = ( IRDA_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ hirda->TxXferCount = 0;
+
+ /* Disable the DMA transfer for transmit request by resetting the DMAT bit
+ in the IRDA CR3 register */
+ hirda->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_DMAT);
+
+ /* Enable the IRDA Transmit Complete Interrupt */
+ __HAL_IRDA_ENABLE_IT(hirda, IRDA_IT_TC);
+}
+
+/**
+ * @brief DMA IRDA Rx Transfer completed callback
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void IRDA_DMAReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+ IRDA_HandleTypeDef* hirda = ( IRDA_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ hirda->RxXferCount = 0;
+
+ /* Disable the DMA transfer for the receiver request by resetting the DMAR bit
+ in the IRDA CR3 register */
+ hirda->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_DMAR);
+
+ if(hirda->State == HAL_IRDA_STATE_BUSY_TX_RX)
+ {
+ hirda->State = HAL_IRDA_STATE_BUSY_TX;
+ }
+ else
+ {
+ hirda->State = HAL_IRDA_STATE_READY;
+ }
+
+ HAL_IRDA_RxCpltCallback(hirda);
+}
+
+/**
+ * @brief DMA IRDA communication error callback
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void IRDA_DMAError(DMA_HandleTypeDef *hdma)
+{
+ IRDA_HandleTypeDef* hirda = ( IRDA_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ hirda->RxXferCount = 0;
+ hirda->TxXferCount = 0;
+ hirda->State= HAL_IRDA_STATE_READY;
+ hirda->ErrorCode |= HAL_IRDA_ERROR_DMA;
+ HAL_IRDA_ErrorCallback(hirda);
+}
+/**
+ * @}
+ */
+
+/** @addtogroup IRDA_Exported_Functions IRDA Exported Functions
+ * @{
+ */
+
+/** @addtogroup IRDA_Exported_Functions_Group2 IO operation functions
+ * @{
+ */
+
+/**
+ * @brief Tx Transfer completed callback
+ * @param hirda: irda handle
+ * @retval None
+ */
+ __weak void HAL_IRDA_TxCpltCallback(IRDA_HandleTypeDef *hirda)
+{
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_IRDA_TxCpltCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Transfer completed callback
+ * @param hirda: irda handle
+ * @retval None
+ */
+__weak void HAL_IRDA_RxCpltCallback(IRDA_HandleTypeDef *hirda)
+{
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_IRDA_TxCpltCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief IRDA error callback
+ * @param hirda: IRDA handle
+ * @retval None
+ */
+ __weak void HAL_IRDA_ErrorCallback(IRDA_HandleTypeDef *hirda)
+{
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_IRDA_ErrorCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup IRDA_Private_Functions IRDA Private Functions
+ * @{
+ */
+
+/**
+ * @brief Receive an amount of data in non blocking mode.
+ * Function called under interruption only, once
+ * interruptions have been enabled by HAL_IRDA_Transmit_IT()
+ * @param hirda: IRDA handle
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda)
+{
+ uint16_t* tmp;
+
+ if((hirda->State == HAL_IRDA_STATE_BUSY_TX) || (hirda->State == HAL_IRDA_STATE_BUSY_TX_RX))
+ {
+
+ if(hirda->TxXferCount == 0)
+ {
+ /* Disable the IRDA Transmit Data Register Empty Interrupt */
+ __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_TXE);
+
+ /* Enable the IRDA Transmit Complete Interrupt */
+ __HAL_IRDA_ENABLE_IT(hirda, IRDA_IT_TC);
+
+ return HAL_OK;
+ }
+ else
+ {
+ if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE))
+ {
+ tmp = (uint16_t*) hirda->pTxBuffPtr;
+ hirda->Instance->TDR = (*tmp & (uint16_t)0x01FF);
+ hirda->pTxBuffPtr += 2;
+ }
+ else
+ {
+ hirda->Instance->TDR = (uint8_t)(*hirda->pTxBuffPtr++ & (uint8_t)0xFF);
+ }
+ hirda->TxXferCount--;
+
+ return HAL_OK;
+ }
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Wraps up transmission in non blocking mode.
+ * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA module.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef IRDA_EndTransmit_IT(IRDA_HandleTypeDef *hirda)
+{
+ /* Disable the IRDA Transmit Complete Interrupt */
+ __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_TC);
+
+ /* Check if a receive process is ongoing or not */
+ if(hirda->State == HAL_IRDA_STATE_BUSY_TX_RX)
+ {
+ hirda->State = HAL_IRDA_STATE_BUSY_RX;
+ }
+ else
+ {
+ /* Disable the IRDA Error Interrupt: (Frame error, noise error, overrun error) */
+ __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_ERR);
+
+ hirda->State = HAL_IRDA_STATE_READY;
+ }
+
+ HAL_IRDA_TxCpltCallback(hirda);
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Receive an amount of data in non blocking mode.
+ * Function called under interruption only, once
+ * interruptions have been enabled by HAL_IRDA_Receive_IT()
+ * @param hirda: IRDA handle
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef IRDA_Receive_IT(IRDA_HandleTypeDef *hirda)
+{
+ uint16_t* tmp;
+ uint16_t uhMask = hirda->Mask;
+
+ if ((hirda->State == HAL_IRDA_STATE_BUSY_RX) || (hirda->State == HAL_IRDA_STATE_BUSY_TX_RX))
+ {
+
+ if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE))
+ {
+ tmp = (uint16_t*) hirda->pRxBuffPtr ;
+ *tmp = (uint16_t)(hirda->Instance->RDR & uhMask);
+ hirda->pRxBuffPtr +=2;
+ }
+ else
+ {
+ *hirda->pRxBuffPtr++ = (uint8_t)(hirda->Instance->RDR & (uint8_t)uhMask);
+ }
+
+ if(--hirda->RxXferCount == 0)
+ {
+ __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_RXNE);
+
+ if(hirda->State == HAL_IRDA_STATE_BUSY_TX_RX)
+ {
+ hirda->State = HAL_IRDA_STATE_BUSY_TX;
+ }
+ else
+ {
+ /* Disable the IRDA Parity Error Interrupt */
+ __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_PE);
+
+ /* Disable the IRDA Error Interrupt: (Frame error, noise error, overrun error) */
+ __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_ERR);
+
+ hirda->State = HAL_IRDA_STATE_READY;
+ }
+
+ HAL_IRDA_RxCpltCallback(hirda);
+
+ return HAL_OK;
+ }
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @}
+ */
+
+/** @addtogroup IRDA_Exported_Functions IRDA Exported Functions
+ * @{
+ */
+
+/** @defgroup IRDA_Exported_Functions_Group3 Peripheral State and Errors functions
+ * @brief IRDA control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the IRDA.
+ (+) HAL_IRDA_GetState() API can be helpful to check in run-time the state of the IRDA peripheral.
+ (+) IRDA_SetConfig() API is used to configure the IRDA communications parameters.
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief return the IRDA state
+ * @param hirda: irda handle
+ * @retval HAL state
+ */
+HAL_IRDA_StateTypeDef HAL_IRDA_GetState(IRDA_HandleTypeDef *hirda)
+{
+ return hirda->State;
+}
+
+/**
+* @brief Return the IRDA error code
+* @param hirda : pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA.
+* @retval IRDA Error Code
+*/
+uint32_t HAL_IRDA_GetError(IRDA_HandleTypeDef *hirda)
+{
+ return hirda->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup IRDA_Private_Functions IRDA Private Functions
+ * @{
+ */
+
+/**
+ * @brief Configure the IRDA peripheral
+ * @param hirda: irda handle
+ * @retval None
+ */
+static HAL_StatusTypeDef IRDA_SetConfig(IRDA_HandleTypeDef *hirda)
+{
+ uint32_t tmpreg = 0x00000000;
+ IRDA_ClockSourceTypeDef clocksource = IRDA_CLOCKSOURCE_UNDEFINED;
+ HAL_StatusTypeDef ret = HAL_OK;
+
+ /* Check the communication parameters */
+ assert_param(IS_IRDA_BAUDRATE(hirda->Init.BaudRate));
+ assert_param(IS_IRDA_WORD_LENGTH(hirda->Init.WordLength));
+ assert_param(IS_IRDA_PARITY(hirda->Init.Parity));
+ assert_param(IS_IRDA_TX_RX_MODE(hirda->Init.Mode));
+ assert_param(IS_IRDA_PRESCALER(hirda->Init.Prescaler));
+ assert_param(IS_IRDA_POWERMODE(hirda->Init.PowerMode));
+
+ /*-------------------------- USART CR1 Configuration -----------------------*/
+ /* Configure the IRDA Word Length, Parity and transfer Mode:
+ Set the M bits according to hirda->Init.WordLength value
+ Set PCE and PS bits according to hirda->Init.Parity value
+ Set TE and RE bits according to hirda->Init.Mode value */
+ tmpreg = (uint32_t)hirda->Init.WordLength | hirda->Init.Parity | hirda->Init.Mode ;
+
+ MODIFY_REG(hirda->Instance->CR1, IRDA_CR1_FIELDS, tmpreg);
+
+ /*-------------------------- USART CR3 Configuration -----------------------*/
+ MODIFY_REG(hirda->Instance->CR3, USART_CR3_IRLP, hirda->Init.PowerMode);
+
+ /*-------------------------- USART GTPR Configuration ----------------------*/
+ MODIFY_REG(hirda->Instance->GTPR, USART_GTPR_PSC, hirda->Init.Prescaler);
+
+ /*-------------------------- USART BRR Configuration -----------------------*/
+ __HAL_IRDA_GETCLOCKSOURCE(hirda, clocksource);
+ switch (clocksource)
+ {
+ case IRDA_CLOCKSOURCE_PCLK1:
+ hirda->Instance->BRR = (uint16_t)(HAL_RCC_GetPCLK1Freq() / hirda->Init.BaudRate);
+ break;
+ case IRDA_CLOCKSOURCE_HSI:
+ hirda->Instance->BRR = (uint16_t)(HSI_VALUE / hirda->Init.BaudRate);
+ break;
+ case IRDA_CLOCKSOURCE_SYSCLK:
+ hirda->Instance->BRR = (uint16_t)(HAL_RCC_GetSysClockFreq() / hirda->Init.BaudRate);
+ break;
+ case IRDA_CLOCKSOURCE_LSE:
+ hirda->Instance->BRR = (uint16_t)(LSE_VALUE / hirda->Init.BaudRate);
+ break;
+ case IRDA_CLOCKSOURCE_UNDEFINED:
+ default:
+ ret = HAL_ERROR;
+ break;
+ }
+
+ return ret;
+}
+
+/**
+ * @brief Check the IRDA Idle State
+ * @param hirda: IRDA handle
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef IRDA_CheckIdleState(IRDA_HandleTypeDef *hirda)
+{
+
+ /* Initialize the IRDA ErrorCode */
+ hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+
+ /* Check if the Transmitter is enabled */
+ if((hirda->Instance->CR1 & USART_CR1_TE) == USART_CR1_TE)
+ {
+ /* Wait until TEACK flag is set */
+ if(IRDA_WaitOnFlagUntilTimeout(hirda, USART_ISR_TEACK, RESET, TEACK_REACK_TIMEOUT) != HAL_OK)
+ {
+ /* Timeout Occured */
+ return HAL_TIMEOUT;
+ }
+ }
+ /* Check if the Receiver is enabled */
+ if((hirda->Instance->CR1 & USART_CR1_RE) == USART_CR1_RE)
+ {
+ if(IRDA_WaitOnFlagUntilTimeout(hirda, USART_ISR_REACK, RESET, TEACK_REACK_TIMEOUT) != HAL_OK)
+ {
+ /* Timeout Occured */
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Initialize the IRDA state*/
+ hirda->State= HAL_IRDA_STATE_READY;
+ /* Process Unlocked */
+ __HAL_UNLOCK(hirda);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Handle IRDA Communication Timeout.
+ * @param hirda: IRDA handle
+ * @param Flag: specifies the IRDA flag to check.
+ * @param Status: the flag status (SET or RESET). The function is locked in a while loop as long as the flag remains set to Status.
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef IRDA_WaitOnFlagUntilTimeout(IRDA_HandleTypeDef *hirda, uint32_t Flag, FlagStatus Status, uint32_t Timeout)
+{
+ uint32_t tickstart = HAL_GetTick();
+
+ /* Wait until flag is set */
+ if(Status == RESET)
+ {
+ while(__HAL_IRDA_GET_FLAG(hirda, Flag) == RESET)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0) || ((HAL_GetTick() - tickstart) > Timeout))
+ {
+ /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
+ __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_TXE);
+ __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_RXNE);
+ __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_PE);
+ __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_ERR);
+
+ hirda->State= HAL_IRDA_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hirda);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ else
+ {
+ while(__HAL_IRDA_GET_FLAG(hirda, Flag) != RESET)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0) || ((HAL_GetTick() - tickstart) > Timeout))
+ {
+ /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
+ __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_TXE);
+ __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_RXNE);
+ __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_PE);
+ __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_ERR);
+
+ hirda->State= HAL_IRDA_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hirda);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
+
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/src/stm32f0xx_hal_iwdg.c b/f0/src/stm32f0xx_hal_iwdg.c
new file mode 100755
index 0000000000000000000000000000000000000000..a22e9f9aa6186b930759fa94f84df2ac681c00fb
--- /dev/null
+++ b/f0/src/stm32f0xx_hal_iwdg.c
@@ -0,0 +1,415 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_iwdg.c
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief IWDG HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Independent Watchdog (IWDG) peripheral:
+ * + Initialization and Configuration functions
+ * + IO operation functions
+ * + Peripheral State functions
+ *
+ @verbatim
+ ===============================================================================
+ ##### IWDG Specific features #####
+ ===============================================================================
+ [..]
+ (+) The IWDG can be started by either software or hardware (configurable
+ through option byte).
+ (+) The IWDG is clocked by its own dedicated Low-Speed clock (LSI) and
+ thus stays active even if the main clock fails.
+ (+) Once the IWDG is started, the LSI is forced ON and cannot be disabled
+ (LSI cannot be disabled too), and the counter starts counting down from
+ the reset value of 0xFFF. When it reaches the end of count value (0x000)
+ a system reset is generated.
+ (+) The IWDG counter should be refreshed at regular intervals, otherwise the
+ watchdog generates an MCU reset when the counter reaches 0.
+ (+) The IWDG is implemented in the VDD voltage domain that is still functional
+ in STOP and STANDBY mode (IWDG reset can wake-up from STANDBY).
+ (+) IWDGRST flag in RCC_CSR register can be used to inform when an IWDG
+ reset occurs.
+ (+) Min-max timeout value @41KHz (LSI): ~0.1ms / ~25.5s
+ The IWDG timeout may vary due to LSI frequency dispersion. STM32F0x
+ devices provide the capability to measure the LSI frequency (LSI clock
+ connected internally to TIM16 CH1 input capture). The measured value
+ can be used to have an IWDG timeout with an acceptable accuracy.
+ For more information, please refer to the STM32F0x Reference manual.
+
+ ##### How to use this driver #####
+ ===============================================================================
+ [..]
+ (#) if Window option is disabled
+ (++) Use IWDG using HAL_IWDG_Init() function to :
+ (+++) Enable write access to IWDG_PR, IWDG_RLR.
+ (+++) Configure the IWDG prescaler, counter reload value.
+ This reload value will be loaded in the IWDG counter each time the counter
+ is reloaded, then the IWDG will start counting down from this value.
+ (++) Use IWDG using HAL_IWDG_Start() function to :
+ (+++) Reload IWDG counter with value defined in the IWDG_RLR register.
+ (+++) Start the IWDG, when the IWDG is used in software mode (no need
+ to enable the LSI, it will be enabled by hardware).
+ (++) Then the application program must refresh the IWDG counter at regular
+ intervals during normal operation to prevent an MCU reset, using
+ HAL_IWDG_Refresh() function.
+ (#) if Window option is enabled:
+ (++) Use IWDG using HAL_IWDG_Start() function to enable IWDG downcounter
+ (++) Use IWDG using HAL_IWDG_Init() function to :
+ (+++) Enable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers.
+ (+++) Configure the IWDG prescaler, reload value and window value.
+ (++) Then the application program must refresh the IWDG counter at regular
+ intervals during normal operation to prevent an MCU reset, using
+ HAL_IWDG_Refresh() function.
+
+ *** IWDG HAL driver macros list ***
+ ====================================
+ [..]
+ Below the list of most used macros in IWDG HAL driver.
+
+ (+) __HAL_IWDG_START: Enable the IWDG peripheral
+ (+) __HAL_IWDG_RELOAD_COUNTER: Reloads IWDG counter with value defined in the reload register
+ (+) __HAL_IWDG_ENABLE_WRITE_ACCESS : Enable write access to IWDG_PR and IWDG_RLR registers
+ (+) __HAL_IWDG_DISABLE_WRITE_ACCESS : Disable write access to IWDG_PR and IWDG_RLR registers
+ (+) __HAL_IWDG_GET_FLAG: Get the selected IWDG's flag status
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup IWDG IWDG HAL module driver
+ * @brief IWDG HAL module driver.
+ * @{
+ */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+
+/** @defgroup IWDG_Private_Defines IWDG Private Defines
+ * @{
+ */
+
+#define HAL_IWDG_DEFAULT_TIMEOUT (uint32_t)1000
+
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup IWDG_Exported_Functions IWDG Exported Functions
+ * @{
+ */
+
+/** @defgroup IWDG_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions.
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Initialize the IWDG according to the specified parameters
+ in the IWDG_InitTypeDef and create the associated handle
+ (+) Manage Window option
+ (+) Initialize the IWDG MSP
+ (+) DeInitialize IWDG MSP
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the IWDG according to the specified
+ * parameters in the IWDG_InitTypeDef and creates the associated handle.
+ * @param hiwdg: pointer to a IWDG_HandleTypeDef structure that contains
+ * the configuration information for the specified IWDG module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_IWDG_Init(IWDG_HandleTypeDef *hiwdg)
+{
+ uint32_t tickstart = 0;
+
+ /* Check the IWDG handle allocation */
+ if(hiwdg == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_IWDG_ALL_INSTANCE(hiwdg->Instance));
+ assert_param(IS_IWDG_PRESCALER(hiwdg->Init.Prescaler));
+ assert_param(IS_IWDG_RELOAD(hiwdg->Init.Reload));
+ assert_param(IS_IWDG_WINDOW(hiwdg->Init.Window));
+
+ /* Check pending flag, if previous update not done, return error */
+ if((__HAL_IWDG_GET_FLAG(hiwdg, IWDG_FLAG_PVU) != RESET)
+ &&(__HAL_IWDG_GET_FLAG(hiwdg, IWDG_FLAG_RVU) != RESET)
+ &&(__HAL_IWDG_GET_FLAG(hiwdg, IWDG_FLAG_WVU) != RESET))
+ {
+ return HAL_ERROR;
+ }
+
+ if(hiwdg->State == HAL_IWDG_STATE_RESET)
+ {
+ /* Init the low level hardware */
+ HAL_IWDG_MspInit(hiwdg);
+ }
+
+ /* Change IWDG peripheral state */
+ hiwdg->State = HAL_IWDG_STATE_BUSY;
+
+ /* Enable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers */
+ /* by writing 0x5555 in KR */
+ __HAL_IWDG_ENABLE_WRITE_ACCESS(hiwdg);
+
+ /* Write to IWDG registers the IWDG_Prescaler & IWDG_Reload values to work with */
+ MODIFY_REG(hiwdg->Instance->PR, IWDG_PR_PR, hiwdg->Init.Prescaler);
+ MODIFY_REG(hiwdg->Instance->RLR, IWDG_RLR_RL, hiwdg->Init.Reload);
+
+ /* check if window option is enabled */
+ if (((hiwdg->Init.Window) != IWDG_WINDOW_DISABLE) || ((hiwdg->Instance->WINR) != IWDG_WINDOW_DISABLE))
+ {
+ tickstart = HAL_GetTick();
+
+ /* Wait for register to be updated */
+ while((uint32_t)(hiwdg->Instance->SR) != RESET)
+ {
+ if((HAL_GetTick() - tickstart) > HAL_IWDG_DEFAULT_TIMEOUT)
+ {
+ /* Set IWDG state */
+ hiwdg->State = HAL_IWDG_STATE_TIMEOUT;
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Write to IWDG WINR the IWDG_Window value to compare with */
+ MODIFY_REG(hiwdg->Instance->WINR, IWDG_WINR_WIN, hiwdg->Init.Window);
+
+ }
+ /* Change IWDG peripheral state */
+ hiwdg->State = HAL_IWDG_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the IWDG MSP.
+ * @param hiwdg: pointer to a IWDG_HandleTypeDef structure that contains
+ * the configuration information for the specified IWDG module.
+ * @retval None
+ */
+__weak void HAL_IWDG_MspInit(IWDG_HandleTypeDef *hiwdg)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_IWDG_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Exported_Functions_Group2 IO operation functions
+ * @brief IO operation functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Start the IWDG.
+ (+) Refresh the IWDG.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Starts the IWDG.
+ * @param hiwdg: pointer to a IWDG_HandleTypeDef structure that contains
+ * the configuration information for the specified IWDG module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_IWDG_Start(IWDG_HandleTypeDef *hiwdg)
+{
+ uint32_t tickstart = 0;
+
+ /* Process Locked */
+ __HAL_LOCK(hiwdg);
+
+ /* Change IWDG peripheral state */
+ hiwdg->State = HAL_IWDG_STATE_BUSY;
+
+ /* Reload IWDG counter with value defined in the RLR register */
+ if ((hiwdg->Init.Window) == IWDG_WINDOW_DISABLE)
+ {
+ __HAL_IWDG_RELOAD_COUNTER(hiwdg);
+ }
+
+ /* Enable the IWDG peripheral */
+ __HAL_IWDG_START(hiwdg);
+
+ tickstart = HAL_GetTick();
+
+ /* Wait until PVU, RVU, WVU flag are RESET */
+ while( (__HAL_IWDG_GET_FLAG(hiwdg, IWDG_FLAG_PVU) != RESET)
+ &&(__HAL_IWDG_GET_FLAG(hiwdg, IWDG_FLAG_RVU) != RESET)
+ &&(__HAL_IWDG_GET_FLAG(hiwdg, IWDG_FLAG_WVU) != RESET) )
+ {
+ if((HAL_GetTick() - tickstart) > HAL_IWDG_DEFAULT_TIMEOUT)
+ {
+ /* Set IWDG state */
+ hiwdg->State = HAL_IWDG_STATE_TIMEOUT;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hiwdg);
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Change IWDG peripheral state */
+ hiwdg->State = HAL_IWDG_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hiwdg);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Refreshes the IWDG.
+ * @param hiwdg: pointer to a IWDG_HandleTypeDef structure that contains
+ * the configuration information for the specified IWDG module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_IWDG_Refresh(IWDG_HandleTypeDef *hiwdg)
+ {
+ uint32_t tickstart = 0;
+
+ /* Process Locked */
+ __HAL_LOCK(hiwdg);
+
+ /* Change IWDG peripheral state */
+ hiwdg->State = HAL_IWDG_STATE_BUSY;
+
+ tickstart = HAL_GetTick();
+
+ /* Wait until RVU flag is RESET */
+ while(__HAL_IWDG_GET_FLAG(hiwdg, IWDG_FLAG_RVU) != RESET)
+ {
+ if((HAL_GetTick() - tickstart) > HAL_IWDG_DEFAULT_TIMEOUT)
+ {
+ /* Set IWDG state */
+ hiwdg->State = HAL_IWDG_STATE_TIMEOUT;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hiwdg);
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Reload IWDG counter with value defined in the reload register */
+ __HAL_IWDG_RELOAD_COUNTER(hiwdg);
+
+ /* Change IWDG peripheral state */
+ hiwdg->State = HAL_IWDG_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hiwdg);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Exported_Functions_Group3 Peripheral State functions
+ * @brief Peripheral State functions.
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral State functions #####
+ ===============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Returns the IWDG state.
+ * @param hiwdg: pointer to a IWDG_HandleTypeDef structure that contains
+ * the configuration information for the specified IWDG module.
+ * @retval HAL state
+ */
+HAL_IWDG_StateTypeDef HAL_IWDG_GetState(IWDG_HandleTypeDef *hiwdg)
+{
+ return hiwdg->State;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_IWDG_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/src/stm32f0xx_hal_pcd.c b/f0/src/stm32f0xx_hal_pcd.c
new file mode 100755
index 0000000000000000000000000000000000000000..58e4d413fbc89e9abfe94e6adffad29ff5fb799b
--- /dev/null
+++ b/f0/src/stm32f0xx_hal_pcd.c
@@ -0,0 +1,1360 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_pcd.c
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief PCD HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the USB Peripheral Controller:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral Control functions
+ * + Peripheral State functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The PCD HAL driver can be used as follows:
+
+ (#) Declare a PCD_HandleTypeDef handle structure, for example:
+ PCD_HandleTypeDef hpcd;
+
+ (#) Fill parameters of Init structure in HCD handle
+
+ (#) Call HAL_PCD_Init() API to initialize the HCD peripheral (Core, Device core, ...)
+
+ (#) Initialize the PCD low level resources through the HAL_PCD_MspInit() API:
+ (##) Enable the PCD/USB Low Level interface clock using
+ (+++) __USB_CLK_ENABLE);
+
+ (##) Initialize the related GPIO clocks
+ (##) Configure PCD pin-out
+ (##) Configure PCD NVIC interrupt
+
+ (#)Associate the Upper USB device stack to the HAL PCD Driver:
+ (##) hpcd.pData = pdev;
+
+ (#)Enable HCD transmission and reception:
+ (##) HAL_PCD_Start();
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+#ifdef HAL_PCD_MODULE_ENABLED
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)|| defined(STM32F070x6)
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup PCD PCD HAL module driver
+ * @brief PCD HAL module driver
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+
+/** @defgroup PCD_Private_Define PCD Private Define
+ * @{
+ */
+#define BTABLE_ADDRESS (0x000)
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup PCD_Private_Functions PCD Private Functions
+ * @{
+ */
+static HAL_StatusTypeDef PCD_EP_ISR_Handler(PCD_HandleTypeDef *hpcd);
+void PCD_WritePMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes);
+void PCD_ReadPMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes);
+/**
+ * @}
+ */
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup PCD_Exported_Functions PCD Exported Functions
+ * @{
+ */
+
+/** @defgroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the PCD according to the specified
+ * parameters in the PCD_InitTypeDef and create the associated handle.
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd)
+{
+ uint32_t i = 0;
+
+ uint32_t wInterrupt_Mask = 0;
+
+ /* Check the PCD handle allocation */
+ if(hpcd == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_PCD_ALL_INSTANCE(hpcd->Instance));
+
+ hpcd->State = PCD_BUSY;
+
+ /* Init the low level hardware : GPIO, CLOCK, NVIC... */
+ HAL_PCD_MspInit(hpcd);
+
+ /* Init endpoints structures */
+ for (i = 0; i < hpcd->Init.dev_endpoints ; i++)
+ {
+ /* Init ep structure */
+ hpcd->IN_ep[i].is_in = 1;
+ hpcd->IN_ep[i].num = i;
+ /* Control until ep is actvated */
+ hpcd->IN_ep[i].type = PCD_EP_TYPE_CTRL;
+ hpcd->IN_ep[i].maxpacket = 0;
+ hpcd->IN_ep[i].xfer_buff = 0;
+ hpcd->IN_ep[i].xfer_len = 0;
+ }
+
+ for (i = 0; i < hpcd->Init.dev_endpoints ; i++)
+ {
+ hpcd->OUT_ep[i].is_in = 0;
+ hpcd->OUT_ep[i].num = i;
+ /* Control until ep is activated */
+ hpcd->OUT_ep[i].type = PCD_EP_TYPE_CTRL;
+ hpcd->OUT_ep[i].maxpacket = 0;
+ hpcd->OUT_ep[i].xfer_buff = 0;
+ hpcd->OUT_ep[i].xfer_len = 0;
+ }
+
+ /* Init Device */
+ /*CNTR_FRES = 1*/
+ hpcd->Instance->CNTR = USB_CNTR_FRES;
+
+ /*CNTR_FRES = 0*/
+ hpcd->Instance->CNTR = 0;
+
+ /*Clear pending interrupts*/
+ hpcd->Instance->ISTR = 0;
+
+ /*Set Btable Adress*/
+ hpcd->Instance->BTABLE = BTABLE_ADDRESS;
+
+ /*set wInterrupt_Mask global variable*/
+ wInterrupt_Mask = USB_CNTR_CTRM | USB_CNTR_WKUPM | USB_CNTR_SUSPM | USB_CNTR_ERRM \
+ | USB_CNTR_ESOFM | USB_CNTR_RESETM;
+
+ /*Set interrupt mask*/
+ hpcd->Instance->CNTR = wInterrupt_Mask;
+
+ hpcd->USB_Address = 0;
+ hpcd->State= PCD_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the PCD peripheral
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd)
+{
+ /* Check the PCD handle allocation */
+ if(hpcd == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ hpcd->State = PCD_BUSY;
+
+ /* Stop Device */
+ HAL_PCD_Stop(hpcd);
+
+ /* DeInit the low level hardware */
+ HAL_PCD_MspDeInit(hpcd);
+
+ hpcd->State = PCD_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the PCD MSP.
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+__weak void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes PCD MSP.
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+__weak void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup PCD_Exported_Functions_Group2 IO operation functions
+ * @brief Data transfers functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the PCD data
+ transfers.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Start The USB OTG Device.
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd)
+{
+ /* Enabling DP Pull-Down bit to Connect internal pull-up on USB DP line */
+ hpcd->Instance->BCDR |= USB_BCDR_DPPU;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Stop The USB OTG Device.
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd)
+{
+ __HAL_LOCK(hpcd);
+
+ /* disable all interrupts and force USB reset */
+ hpcd->Instance->CNTR = USB_CNTR_FRES;
+
+ /* clear interrupt status register */
+ hpcd->Instance->ISTR = 0;
+
+ /* switch-off device */
+ hpcd->Instance->CNTR = (USB_CNTR_FRES | USB_CNTR_PDWN);
+
+ __HAL_UNLOCK(hpcd);
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup PCD_Private_Functions PCD Private Functions
+ * @{
+ */
+/**
+ * @brief This function handles PCD Endpoint interrupt request.
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef PCD_EP_ISR_Handler(PCD_HandleTypeDef *hpcd)
+{
+ PCD_EPTypeDef *ep;
+ uint16_t count=0;
+ uint8_t EPindex;
+ __IO uint16_t wIstr;
+ __IO uint16_t wEPVal = 0;
+
+ /* stay in loop while pending interrupts */
+ while (((wIstr = hpcd->Instance->ISTR) & USB_ISTR_CTR) != 0)
+ {
+ /* extract highest priority endpoint number */
+ EPindex = (uint8_t)(wIstr & USB_ISTR_EP_ID);
+
+ if (EPindex == 0)
+ {
+ /* Decode and service control endpoint interrupt */
+
+ /* DIR bit = origin of the interrupt */
+ if ((wIstr & USB_ISTR_DIR) == 0)
+ {
+ /* DIR = 0 */
+
+ /* DIR = 0 => IN int */
+ /* DIR = 0 implies that (EP_CTR_TX = 1) always */
+ PCD_CLEAR_TX_EP_CTR(hpcd->Instance, PCD_ENDP0);
+ ep = &hpcd->IN_ep[0];
+
+ ep->xfer_count = PCD_GET_EP_TX_CNT(hpcd->Instance, ep->num);
+ ep->xfer_buff += ep->xfer_count;
+
+ /* TX COMPLETE */
+ HAL_PCD_DataInStageCallback(hpcd, 0);
+
+
+ if((hpcd->USB_Address > 0)&& ( ep->xfer_len == 0))
+ {
+ hpcd->Instance->DADDR = (hpcd->USB_Address | USB_DADDR_EF);
+ hpcd->USB_Address = 0;
+ }
+
+ }
+ else
+ {
+ /* DIR = 1 */
+
+ /* DIR = 1 & CTR_RX => SETUP or OUT int */
+ /* DIR = 1 & (CTR_TX | CTR_RX) => 2 int pending */
+ ep = &hpcd->OUT_ep[0];
+ wEPVal = PCD_GET_ENDPOINT(hpcd->Instance, PCD_ENDP0);
+
+ if ((wEPVal & USB_EP_SETUP) != 0)
+ {
+ /* Get SETUP Packet*/
+ ep->xfer_count = PCD_GET_EP_RX_CNT(hpcd->Instance, ep->num);
+ PCD_ReadPMA(hpcd->Instance, (uint8_t*)hpcd->Setup ,ep->pmaadress , ep->xfer_count);
+ /* SETUP bit kept frozen while CTR_RX = 1*/
+ PCD_CLEAR_RX_EP_CTR(hpcd->Instance, PCD_ENDP0);
+
+ /* Process SETUP Packet*/
+ HAL_PCD_SetupStageCallback(hpcd);
+ }
+
+ else if ((wEPVal & USB_EP_CTR_RX) != 0)
+ {
+ PCD_CLEAR_RX_EP_CTR(hpcd->Instance, PCD_ENDP0);
+ /* Get Control Data OUT Packet*/
+ ep->xfer_count = PCD_GET_EP_RX_CNT(hpcd->Instance, ep->num);
+
+ if (ep->xfer_count != 0)
+ {
+ PCD_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaadress, ep->xfer_count);
+ ep->xfer_buff+=ep->xfer_count;
+ }
+
+ /* Process Control Data OUT Packet*/
+ HAL_PCD_DataOutStageCallback(hpcd, 0);
+
+ PCD_SET_EP_RX_CNT(hpcd->Instance, PCD_ENDP0, ep->maxpacket);
+ PCD_SET_EP_RX_STATUS(hpcd->Instance, PCD_ENDP0, USB_EP_RX_VALID);
+ }
+ }
+ }
+ else
+ {
+
+ /* Decode and service non control endpoints interrupt */
+
+ /* process related endpoint register */
+ wEPVal = PCD_GET_ENDPOINT(hpcd->Instance, EPindex);
+ if ((wEPVal & USB_EP_CTR_RX) != 0)
+ {
+ /* clear int flag */
+ PCD_CLEAR_RX_EP_CTR(hpcd->Instance, EPindex);
+ ep = &hpcd->OUT_ep[EPindex];
+
+ /* OUT double Buffering*/
+ if (ep->doublebuffer == 0)
+ {
+ count = PCD_GET_EP_RX_CNT(hpcd->Instance, ep->num);
+ if (count != 0)
+ {
+ PCD_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaadress, count);
+ }
+ }
+ else
+ {
+ if (PCD_GET_ENDPOINT(hpcd->Instance, ep->num) & USB_EP_DTOG_RX)
+ {
+ /*read from endpoint BUF0Addr buffer*/
+ count = PCD_GET_EP_DBUF0_CNT(hpcd->Instance, ep->num);
+ if (count != 0)
+ {
+ PCD_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr0, count);
+ }
+ }
+ else
+ {
+ /*read from endpoint BUF1Addr buffer*/
+ count = PCD_GET_EP_DBUF1_CNT(hpcd->Instance, ep->num);
+ if (count != 0)
+ {
+ PCD_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr1, count);
+ }
+ }
+ PCD_FreeUserBuffer(hpcd->Instance, ep->num, PCD_EP_DBUF_OUT);
+ }
+ /*multi-packet on the NON control OUT endpoint*/
+ ep->xfer_count+=count;
+ ep->xfer_buff+=count;
+
+ if ((ep->xfer_len == 0) || (count < ep->maxpacket))
+ {
+ /* RX COMPLETE */
+ HAL_PCD_DataOutStageCallback(hpcd, ep->num);
+ }
+ else
+ {
+ HAL_PCD_EP_Receive(hpcd, ep->num, ep->xfer_buff, ep->xfer_len);
+ }
+
+ } /* if((wEPVal & EP_CTR_RX) */
+
+ if ((wEPVal & USB_EP_CTR_TX) != 0)
+ {
+ ep = &hpcd->IN_ep[EPindex];
+
+ /* clear int flag */
+ PCD_CLEAR_TX_EP_CTR(hpcd->Instance, EPindex);
+
+ /* IN double Buffering*/
+ if (ep->doublebuffer == 0)
+ {
+ ep->xfer_count = PCD_GET_EP_TX_CNT(hpcd->Instance, ep->num);
+ if (ep->xfer_count != 0)
+ {
+ PCD_WritePMA(hpcd->Instance, ep->xfer_buff, ep->pmaadress, ep->xfer_count);
+ }
+ }
+ else
+ {
+ if (PCD_GET_ENDPOINT(hpcd->Instance, ep->num) & USB_EP_DTOG_TX)
+ {
+ /*read from endpoint BUF0Addr buffer*/
+ ep->xfer_count = PCD_GET_EP_DBUF0_CNT(hpcd->Instance, ep->num);
+ if (ep->xfer_count != 0)
+ {
+ PCD_WritePMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr0, ep->xfer_count);
+ }
+ }
+ else
+ {
+ /*read from endpoint BUF1Addr buffer*/
+ ep->xfer_count = PCD_GET_EP_DBUF1_CNT(hpcd->Instance, ep->num);
+ if (ep->xfer_count != 0)
+ {
+ PCD_WritePMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr1, ep->xfer_count);
+ }
+ }
+ PCD_FreeUserBuffer(hpcd->Instance, ep->num, PCD_EP_DBUF_IN);
+ }
+ /*multi-packet on the NON control IN endpoint*/
+ ep->xfer_count = PCD_GET_EP_TX_CNT(hpcd->Instance, ep->num);
+ ep->xfer_buff+=ep->xfer_count;
+
+ /* Zero Length Packet? */
+ if (ep->xfer_len == 0)
+ {
+ /* TX COMPLETE */
+ HAL_PCD_DataInStageCallback(hpcd, ep->num);
+ }
+ else
+ {
+ HAL_PCD_EP_Transmit(hpcd, ep->num, ep->xfer_buff, ep->xfer_len);
+ }
+ }
+ }
+ }
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+/** @addtogroup PCD_Exported_Functions
+ * @{
+ */
+
+/** @defgroup PCD_Exported_Functions_Group2 IO operation functions
+ * @{
+ */
+
+/**
+ * @brief This function handles PCD interrupt request.
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd)
+{
+ uint32_t wInterrupt_Mask = 0;
+
+ if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_CTR))
+ {
+ /* servicing of the endpoint correct transfer interrupt */
+ /* clear of the CTR flag into the sub */
+ PCD_EP_ISR_Handler(hpcd);
+ }
+
+ if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_RESET))
+ {
+ __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_RESET);
+ HAL_PCD_ResetCallback(hpcd);
+ HAL_PCD_SetAddress(hpcd, 0);
+ }
+
+ if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_PMAOVR))
+ {
+ __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_PMAOVR);
+ }
+
+ if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_ERR))
+ {
+ __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_ERR);
+ }
+
+ if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_WKUP))
+ {
+
+ hpcd->Instance->CNTR &= ~(USB_CNTR_LPMODE);
+
+ /*set wInterrupt_Mask global variable*/
+ wInterrupt_Mask = USB_CNTR_CTRM | USB_CNTR_WKUPM | USB_CNTR_SUSPM | USB_CNTR_ERRM \
+ | USB_CNTR_ESOFM | USB_CNTR_RESETM;
+
+ /*Set interrupt mask*/
+ hpcd->Instance->CNTR = wInterrupt_Mask;
+
+ HAL_PCD_ResumeCallback(hpcd);
+
+ __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_WKUP);
+ }
+
+ if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_SUSP))
+ {
+ /* clear of the ISTR bit must be done after setting of CNTR_FSUSP */
+ __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_SUSP);
+
+ /* Force low-power mode in the macrocell */
+ hpcd->Instance->CNTR |= USB_CNTR_FSUSP;
+ hpcd->Instance->CNTR |= USB_CNTR_LPMODE;
+
+ if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_WKUP) == 0)
+ {
+ HAL_PCD_SuspendCallback(hpcd);
+ }
+ }
+
+ if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_SOF))
+ {
+ __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_SOF);
+ HAL_PCD_SOFCallback(hpcd);
+ }
+
+ if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_ESOF))
+ {
+ /* clear ESOF flag in ISTR */
+ __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_ESOF);
+ }
+}
+
+/**
+ * @brief Data out stage callbacks
+ * @param hpcd: PCD handle
+ * @param epnum: endpoint number
+ * @retval None
+ */
+ __weak void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_DataOutStageCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Data IN stage callbacks
+ * @param hpcd: PCD handle
+ * @param epnum: endpoint number
+ * @retval None
+ */
+ __weak void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_DataInStageCallback could be implemented in the user file
+ */
+}
+/**
+ * @brief Setup stage callback
+ * @param hpcd: ppp handle
+ * @retval None
+ */
+ __weak void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_SetupStageCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief USB Start Of Frame callbacks
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+ __weak void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_SOFCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief USB Reset callbacks
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+ __weak void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_ResetCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Suspend event callbacks
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+ __weak void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_SuspendCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Resume event callbacks
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+ __weak void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_ResumeCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Incomplete ISO OUT callbacks
+ * @param hpcd: PCD handle
+ * @param epnum: endpoint number
+ * @retval None
+ */
+ __weak void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_ISOOUTIncompleteCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Incomplete ISO IN callbacks
+ * @param hpcd: PCD handle
+ * @param epnum: endpoint number
+ * @retval None
+ */
+ __weak void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_ISOINIncompleteCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Connection event callbacks
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+ __weak void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_ConnectCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Disconnection event callbacks
+ * @param hpcd: ppp handle
+ * @retval None
+ */
+ __weak void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_DisconnectCallback could be implemented in the user file
+ */
+}
+/**
+ * @}
+ */
+
+/** @defgroup PCD_Exported_Functions_Group3 Peripheral Control functions
+ * @brief management functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the PCD data
+ transfers.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Connect the USB device
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd)
+{
+ __HAL_LOCK(hpcd);
+
+ /* Enabling DP Pull-Down bit to Connect internal pull-up on USB DP line */
+ hpcd->Instance->BCDR |= USB_BCDR_DPPU;
+
+ __HAL_UNLOCK(hpcd);
+ return HAL_OK;
+}
+
+/**
+ * @brief Disconnect the USB device
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd)
+{
+ __HAL_LOCK(hpcd);
+
+ /* Disable DP Pull-Down bit*/
+ hpcd->Instance->BCDR &= ~(USB_BCDR_DPPU);
+
+ __HAL_UNLOCK(hpcd);
+ return HAL_OK;
+}
+
+/**
+ * @brief Set the USB Device address
+ * @param hpcd: PCD handle
+ * @param address: new device address
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address)
+{
+ __HAL_LOCK(hpcd);
+
+ if(address == 0)
+ {
+ /* set device address and enable function */
+ hpcd->Instance->DADDR = USB_DADDR_EF;
+ }
+ else /* USB Address will be applied later */
+ {
+ hpcd->USB_Address = address;
+ }
+
+ __HAL_UNLOCK(hpcd);
+ return HAL_OK;
+}
+/**
+ * @brief Open and configure an endpoint
+ * @param hpcd: PCD handle
+ * @param ep_addr: endpoint address
+ * @param ep_mps: endpoint max packert size
+ * @param ep_type: endpoint type
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type)
+{
+ HAL_StatusTypeDef ret = HAL_OK;
+ PCD_EPTypeDef *ep;
+
+ if ((ep_addr & 0x80) == 0x80)
+ {
+ ep = &hpcd->IN_ep[ep_addr & 0x7F];
+ }
+ else
+ {
+ ep = &hpcd->OUT_ep[ep_addr & 0x7F];
+ }
+ ep->num = ep_addr & 0x7F;
+
+ ep->is_in = (0x80 & ep_addr) != 0;
+ ep->maxpacket = ep_mps;
+ ep->type = ep_type;
+
+ __HAL_LOCK(hpcd);
+
+/* initialize Endpoint */
+ switch (ep->type)
+ {
+ case PCD_EP_TYPE_CTRL:
+ PCD_SET_EPTYPE(hpcd->Instance, ep->num, USB_EP_CONTROL);
+ break;
+ case PCD_EP_TYPE_BULK:
+ PCD_SET_EPTYPE(hpcd->Instance, ep->num, USB_EP_BULK);
+ break;
+ case PCD_EP_TYPE_INTR:
+ PCD_SET_EPTYPE(hpcd->Instance, ep->num, USB_EP_INTERRUPT);
+ break;
+ case PCD_EP_TYPE_ISOC:
+ PCD_SET_EPTYPE(hpcd->Instance, ep->num, USB_EP_ISOCHRONOUS);
+ break;
+ }
+
+ PCD_SET_EP_ADDRESS(hpcd->Instance, ep->num, ep->num);
+
+ if (ep->doublebuffer == 0)
+ {
+ if (ep->is_in)
+ {
+ /*Set the endpoint Transmit buffer address */
+ PCD_SET_EP_TX_ADDRESS(hpcd->Instance, ep->num, ep->pmaadress);
+ PCD_CLEAR_TX_DTOG(hpcd->Instance, ep->num);
+ /* Configure NAK status for the Endpoint*/
+ PCD_SET_EP_TX_STATUS(hpcd->Instance, ep->num, USB_EP_TX_NAK);
+ }
+ else
+ {
+ /*Set the endpoint Receive buffer address */
+ PCD_SET_EP_RX_ADDRESS(hpcd->Instance, ep->num, ep->pmaadress);
+ /*Set the endpoint Receive buffer counter*/
+ PCD_SET_EP_RX_CNT(hpcd->Instance, ep->num, ep->maxpacket);
+ PCD_CLEAR_RX_DTOG(hpcd->Instance, ep->num);
+ /* Configure VALID status for the Endpoint*/
+ PCD_SET_EP_RX_STATUS(hpcd->Instance, ep->num, USB_EP_RX_VALID);
+ }
+ }
+ /*Double Buffer*/
+ else
+ {
+ /*Set the endpoint as double buffered*/
+ PCD_SET_EP_DBUF(hpcd->Instance, ep->num);
+ /*Set buffer address for double buffered mode*/
+ PCD_SET_EP_DBUF_ADDR(hpcd->Instance, ep->num,ep->pmaaddr0, ep->pmaaddr1);
+
+ if (ep->is_in==0)
+ {
+ /* Clear the data toggle bits for the endpoint IN/OUT*/
+ PCD_CLEAR_RX_DTOG(hpcd->Instance, ep->num);
+ PCD_CLEAR_TX_DTOG(hpcd->Instance, ep->num);
+
+ /* Reset value of the data toggle bits for the endpoint out*/
+ PCD_TX_DTOG(hpcd->Instance, ep->num);
+
+ PCD_SET_EP_RX_STATUS(hpcd->Instance, ep->num, USB_EP_RX_VALID);
+ PCD_SET_EP_TX_STATUS(hpcd->Instance, ep->num, USB_EP_TX_DIS);
+ }
+ else
+ {
+ /* Clear the data toggle bits for the endpoint IN/OUT*/
+ PCD_CLEAR_RX_DTOG(hpcd->Instance, ep->num);
+ PCD_CLEAR_TX_DTOG(hpcd->Instance, ep->num);
+ PCD_RX_DTOG(hpcd->Instance, ep->num);
+ /* Configure DISABLE status for the Endpoint*/
+ PCD_SET_EP_TX_STATUS(hpcd->Instance, ep->num, USB_EP_TX_DIS);
+ PCD_SET_EP_RX_STATUS(hpcd->Instance, ep->num, USB_EP_RX_DIS);
+ }
+ }
+
+ __HAL_UNLOCK(hpcd);
+ return ret;
+}
+
+
+/**
+ * @brief Deactivate an endpoint
+ * @param hpcd: PCD handle
+ * @param ep_addr: endpoint address
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr)
+{
+ PCD_EPTypeDef *ep;
+
+ if ((ep_addr & 0x80) == 0x80)
+ {
+ ep = &hpcd->IN_ep[ep_addr & 0x7F];
+ }
+ else
+ {
+ ep = &hpcd->OUT_ep[ep_addr & 0x7F];
+ }
+ ep->num = ep_addr & 0x7F;
+
+ ep->is_in = (0x80 & ep_addr) != 0;
+
+ __HAL_LOCK(hpcd);
+
+ if (ep->doublebuffer == 0)
+ {
+ if (ep->is_in)
+ {
+ PCD_CLEAR_TX_DTOG(hpcd->Instance, ep->num);
+ /* Configure DISABLE status for the Endpoint*/
+ PCD_SET_EP_TX_STATUS(hpcd->Instance, ep->num, USB_EP_TX_DIS);
+ }
+ else
+ {
+ PCD_CLEAR_RX_DTOG(hpcd->Instance, ep->num);
+ /* Configure DISABLE status for the Endpoint*/
+ PCD_SET_EP_RX_STATUS(hpcd->Instance, ep->num, USB_EP_RX_DIS);
+ }
+ }
+ /*Double Buffer*/
+ else
+ {
+ if (ep->is_in==0)
+ {
+ /* Clear the data toggle bits for the endpoint IN/OUT*/
+ PCD_CLEAR_RX_DTOG(hpcd->Instance, ep->num);
+ PCD_CLEAR_TX_DTOG(hpcd->Instance, ep->num);
+
+ /* Reset value of the data toggle bits for the endpoint out*/
+ PCD_TX_DTOG(hpcd->Instance, ep->num);
+
+ PCD_SET_EP_RX_STATUS(hpcd->Instance, ep->num, USB_EP_RX_DIS);
+ PCD_SET_EP_TX_STATUS(hpcd->Instance, ep->num, USB_EP_TX_DIS);
+ }
+ else
+ {
+ /* Clear the data toggle bits for the endpoint IN/OUT*/
+ PCD_CLEAR_RX_DTOG(hpcd->Instance, ep->num);
+ PCD_CLEAR_TX_DTOG(hpcd->Instance, ep->num);
+ PCD_RX_DTOG(hpcd->Instance, ep->num);
+ /* Configure DISABLE status for the Endpoint*/
+ PCD_SET_EP_TX_STATUS(hpcd->Instance, ep->num, USB_EP_TX_DIS);
+ PCD_SET_EP_RX_STATUS(hpcd->Instance, ep->num, USB_EP_RX_DIS);
+ }
+ }
+
+ __HAL_UNLOCK(hpcd);
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Receive an amount of data
+ * @param hpcd: PCD handle
+ * @param ep_addr: endpoint address
+ * @param pBuf: pointer to the reception buffer
+ * @param len: amount of data to be received
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len)
+{
+
+ PCD_EPTypeDef *ep;
+
+ ep = &hpcd->OUT_ep[ep_addr & 0x7F];
+
+ /*setup and start the Xfer */
+ ep->xfer_buff = pBuf;
+ ep->xfer_len = len;
+ ep->xfer_count = 0;
+ ep->is_in = 0;
+ ep->num = ep_addr & 0x7F;
+
+ __HAL_LOCK(hpcd);
+
+ /* Multi packet transfer*/
+ if (ep->xfer_len > ep->maxpacket)
+ {
+ len=ep->maxpacket;
+ ep->xfer_len-=len;
+ }
+ else
+ {
+ len=ep->xfer_len;
+ ep->xfer_len =0;
+ }
+
+ /* configure and validate Rx endpoint */
+ if (ep->doublebuffer == 0)
+ {
+ /*Set RX buffer count*/
+ PCD_SET_EP_RX_CNT(hpcd->Instance, ep->num, len);
+ }
+ else
+ {
+ /*Set the Double buffer counter*/
+ PCD_SET_EP_DBUF1_CNT(hpcd->Instance, ep->num, ep->is_in, len);
+ }
+
+ PCD_SET_EP_RX_STATUS(hpcd->Instance, ep->num, USB_EP_RX_VALID);
+
+ __HAL_UNLOCK(hpcd);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Get Received Data Size
+ * @param hpcd: PCD handle
+ * @param ep_addr: endpoint address
+ * @retval Data Size
+ */
+uint16_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr)
+{
+ return hpcd->OUT_ep[ep_addr & 0x7F].xfer_count;
+}
+/**
+ * @brief Send an amount of data
+ * @param hpcd: PCD handle
+ * @param ep_addr: endpoint address
+ * @param pBuf: pointer to the transmission buffer
+ * @param len: amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len)
+{
+ PCD_EPTypeDef *ep;
+ uint16_t pmabuffer = 0;
+
+ ep = &hpcd->IN_ep[ep_addr & 0x7F];
+
+ /*setup and start the Xfer */
+ ep->xfer_buff = pBuf;
+ ep->xfer_len = len;
+ ep->xfer_count = 0;
+ ep->is_in = 1;
+ ep->num = ep_addr & 0x7F;
+
+ __HAL_LOCK(hpcd);
+
+ /*Multi packet transfer*/
+ if (ep->xfer_len > ep->maxpacket)
+ {
+ len=ep->maxpacket;
+ ep->xfer_len-=len;
+ }
+ else
+ {
+ len=ep->xfer_len;
+ ep->xfer_len =0;
+ }
+
+ /* configure and validate Tx endpoint */
+ if (ep->doublebuffer == 0)
+ {
+ PCD_WritePMA(hpcd->Instance, ep->xfer_buff, ep->pmaadress, len);
+ PCD_SET_EP_TX_CNT(hpcd->Instance, ep->num, len);
+ }
+ else
+ {
+ /*Set the Double buffer counter*/
+ PCD_SET_EP_DBUF1_CNT(hpcd->Instance, ep->num, ep->is_in, len);
+
+ /*Write the data to the USB endpoint*/
+ if (PCD_GET_ENDPOINT(hpcd->Instance, ep->num)& USB_EP_DTOG_TX)
+ {
+ pmabuffer = ep->pmaaddr1;
+ }
+ else
+ {
+ pmabuffer = ep->pmaaddr0;
+ }
+ PCD_WritePMA(hpcd->Instance, ep->xfer_buff, pmabuffer, len);
+ PCD_FreeUserBuffer(hpcd->Instance, ep->num, ep->is_in);
+ }
+
+ PCD_SET_EP_TX_STATUS(hpcd->Instance, ep->num, USB_EP_TX_VALID);
+
+ __HAL_UNLOCK(hpcd);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Set a STALL condition over an endpoint
+ * @param hpcd: PCD handle
+ * @param ep_addr: endpoint address
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr)
+{
+ PCD_EPTypeDef *ep;
+
+ __HAL_LOCK(hpcd);
+
+ if ((0x80 & ep_addr) == 0x80)
+ {
+ ep = &hpcd->IN_ep[ep_addr & 0x7F];
+ }
+ else
+ {
+ ep = &hpcd->OUT_ep[ep_addr];
+ }
+
+ ep->is_stall = 1;
+ ep->num = ep_addr & 0x7F;
+ ep->is_in = ((ep_addr & 0x80) == 0x80);
+
+ if (ep->num == 0)
+ {
+ /* This macro sets STALL status for RX & TX*/
+ PCD_SET_EP_TXRX_STATUS(hpcd->Instance, ep->num, USB_EP_RX_STALL, USB_EP_TX_STALL);
+ }
+ else
+ {
+ if (ep->is_in)
+ {
+ PCD_SET_EP_TX_STATUS(hpcd->Instance, ep->num , USB_EP_TX_STALL);
+ }
+ else
+ {
+ PCD_SET_EP_RX_STATUS(hpcd->Instance, ep->num , USB_EP_RX_STALL);
+ }
+ }
+ __HAL_UNLOCK(hpcd);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Clear a STALL condition over in an endpoint
+ * @param hpcd: PCD handle
+ * @param ep_addr: endpoint address
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr)
+{
+ PCD_EPTypeDef *ep;
+
+ if ((0x80 & ep_addr) == 0x80)
+ {
+ ep = &hpcd->IN_ep[ep_addr & 0x7F];
+ }
+ else
+ {
+ ep = &hpcd->OUT_ep[ep_addr];
+ }
+
+ ep->is_stall = 0;
+ ep->num = ep_addr & 0x7F;
+ ep->is_in = ((ep_addr & 0x80) == 0x80);
+
+ __HAL_LOCK(hpcd);
+
+ if (ep->is_in)
+ {
+ PCD_CLEAR_TX_DTOG(hpcd->Instance, ep->num);
+ PCD_SET_EP_TX_STATUS(hpcd->Instance, ep->num, USB_EP_TX_VALID);
+ }
+ else
+ {
+ PCD_CLEAR_RX_DTOG(hpcd->Instance, ep->num);
+ PCD_SET_EP_RX_STATUS(hpcd->Instance, ep->num, USB_EP_RX_VALID);
+ }
+ __HAL_UNLOCK(hpcd);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Flush an endpoint
+ * @param hpcd: PCD handle
+ * @param ep_addr: endpoint address
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr)
+{
+ return HAL_OK;
+}
+
+/**
+ * @brief HAL_PCD_ActiveRemoteWakeup : active remote wakeup signalling
+ * @param hpcd: PCD handle
+ * @retval status
+ */
+HAL_StatusTypeDef HAL_PCD_ActiveRemoteWakeup(PCD_HandleTypeDef *hpcd)
+{
+ hpcd->Instance->CNTR |= USB_CNTR_RESUME;
+ return HAL_OK;
+}
+
+/**
+ * @brief HAL_PCD_DeActiveRemoteWakeup : de-active remote wakeup signalling
+ * @param hpcd: PCD handle
+ * @retval status
+ */
+HAL_StatusTypeDef HAL_PCD_DeActiveRemoteWakeup(PCD_HandleTypeDef *hpcd)
+{
+ hpcd->Instance->CNTR &= ~(USB_CNTR_RESUME);
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup PCD_Private_Functions
+ * @{
+ */
+/**
+ * @brief Copy a buffer from user memory area to packet memory area (PMA)
+ * @param USBx: USB peripheral instance register address.
+ * @param pbUsrBuf: pointer to user memory area.
+ * @param wPMABufAddr: address into PMA.
+ * @param wNBytes: no. of bytes to be copied.
+ * @retval None
+ */
+void PCD_WritePMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes)
+{
+ uint32_t n = (wNBytes + 1) >> 1;
+ uint32_t i;
+ uint16_t temp1, temp2;
+ uint16_t *pdwVal;
+ pdwVal = (uint16_t *)(wPMABufAddr + (uint32_t)USBx + 0x400);
+
+ for (i = n; i != 0; i--)
+ {
+ temp1 = (uint16_t) * pbUsrBuf;
+ pbUsrBuf++;
+ temp2 = temp1 | (uint16_t) * pbUsrBuf << 8;
+ *pdwVal++ = temp2;
+ pbUsrBuf++;
+ }
+}
+
+/**
+ * @brief Copy a buffer from user memory area to packet memory area (PMA)
+ * @param USBx: USB peripheral instance register address.
+ * @param pbUsrBuf = pointer to user memory area.
+ * @param wPMABufAddr: address into PMA.
+ * @param wNBytes: no. of bytes to be copied.
+ * @retval None
+ */
+void PCD_ReadPMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes)
+{
+ uint32_t n = (wNBytes + 1) >> 1;
+ uint32_t i;
+ uint16_t *pdwVal;
+ pdwVal = (uint16_t *)(wPMABufAddr + (uint32_t)USBx + 0x400);
+ for (i = n; i != 0; i--)
+ {
+ *(uint16_t*)pbUsrBuf++ = *pdwVal++;
+ pbUsrBuf++;
+ }
+}
+/**
+ * @}
+ */
+
+/** @addtogroup PCD_Exported_Functions
+ * @{
+ */
+
+/** @defgroup PCD_Exported_Functions_Group4 Peripheral State functions
+ * @brief Peripheral State functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral State functions #####
+ ===============================================================================
+ [..]
+ This subsection permit to get in run-time the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the PCD state
+ * @param hpcd : PCD handle
+ * @retval HAL state
+ */
+PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd)
+{
+ return hpcd->State;
+}
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F042x6 || STM32F072xB || STM32F078xx || STM32F070xB || STM32F070x6 */
+
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/src/stm32f0xx_hal_pcd_ex.c b/f0/src/stm32f0xx_hal_pcd_ex.c
new file mode 100755
index 0000000000000000000000000000000000000000..0343a50dd7dce5341dfe26bcd06cffeb53544458
--- /dev/null
+++ b/f0/src/stm32f0xx_hal_pcd_ex.c
@@ -0,0 +1,153 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_pcd_ex.c
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief Extended PCD HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the USB Peripheral Controller:
+ * + Configuration of the PMA for EP
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+#ifdef HAL_PCD_MODULE_ENABLED
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)|| defined(STM32F070x6)
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup PCDEx PCDEx Extended HAL module driver
+ * @brief PCDEx PCDEx Extended HAL module driver
+ * @{
+ */
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup PCDEx_Exported_Functions PCDEx Exported Functions
+ * @{
+ */
+
+/** @defgroup PCDEx_Exported_Functions_Group2 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral extended features methods #####
+ ===============================================================================
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Configure PMA for EP
+ * @param hpcd: PCD handle
+ * @param ep_addr: endpoint address
+ * @param ep_kind: endpoint Kind
+ * @arg USB_SNG_BUF: Single Buffer used
+ * @arg USB_DBL_BUF: Double Buffer used
+ * @param pmaadress: EP address in The PMA: In case of single buffer endpoint
+ * this parameter is 16-bit value providing the address
+ * in PMA allocated to endpoint.
+ * In case of double buffer endpoint this parameter
+ * is a 32-bit value providing the endpoint buffer 0 address
+ * in the LSB part of 32-bit value and endpoint buffer 1 address
+ * in the MSB part of 32-bit value.
+ * @retval : status
+ */
+
+HAL_StatusTypeDef HAL_PCDEx_PMAConfig(PCD_HandleTypeDef *hpcd,
+ uint16_t ep_addr,
+ uint16_t ep_kind,
+ uint32_t pmaadress)
+
+{
+ PCD_EPTypeDef *ep;
+
+ /* initialize ep structure*/
+ if ((0x80 & ep_addr) == 0x80)
+ {
+ ep = &hpcd->IN_ep[ep_addr & 0x7F];
+ }
+ else
+ {
+ ep = &hpcd->OUT_ep[ep_addr];
+ }
+
+ /* Here we check if the endpoint is single or double Buffer*/
+ if (ep_kind == PCD_SNG_BUF)
+ {
+ /*Single Buffer*/
+ ep->doublebuffer = 0;
+ /*Configure te PMA*/
+ ep->pmaadress = (uint16_t)pmaadress;
+ }
+ else /*USB_DBL_BUF*/
+ {
+ /*Double Buffer Endpoint*/
+ ep->doublebuffer = 1;
+ /*Configure the PMA*/
+ ep->pmaaddr0 = pmaadress & 0xFFFF;
+ ep->pmaaddr1 = (pmaadress & 0xFFFF0000) >> 16;
+ }
+
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F042x6 || STM32F072xB || STM32F078xx || STM32F070xB || STM32F070x6 */
+
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/src/stm32f0xx_hal_pwr.c b/f0/src/stm32f0xx_hal_pwr.c
new file mode 100755
index 0000000000000000000000000000000000000000..74aff8ae53caea581d5bed85483449b7171138e2
--- /dev/null
+++ b/f0/src/stm32f0xx_hal_pwr.c
@@ -0,0 +1,470 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_pwr.c
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief PWR HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Power Controller (PWR) peripheral:
+ * + Initialization/de-initialization function
+ * + Peripheral Control function
+ *
+ @verbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup PWR PWR HAL module Driver
+ * @brief PWR HAL module driver
+ * @{
+ */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup PWR_Exported_Functions PWR Exported Functions
+ * @{
+ */
+
+/** @defgroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and de-initialization functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..]
+ After reset, the backup domain (RTC registers, RTC backup data
+ registers) is protected against possible unwanted
+ write accesses.
+ To enable access to the RTC Domain and RTC registers, proceed as follows:
+ (+) Enable the Power Controller (PWR) APB1 interface clock using the
+ __PWR_CLK_ENABLE() macro.
+ (+) Enable access to RTC domain using the HAL_PWR_EnableBkUpAccess() function.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the PWR peripheral registers to their default reset values.
+ * @retval None
+ */
+void HAL_PWR_DeInit(void)
+{
+ __PWR_FORCE_RESET();
+ __PWR_RELEASE_RESET();
+}
+
+/**
+ * @brief Enables access to the backup domain (RTC registers, RTC
+ * backup data registers).
+ * @note If the HSE divided by 32 is used as the RTC clock, the
+ * Backup Domain Access should be kept enabled.
+ * @retval None
+ */
+void HAL_PWR_EnableBkUpAccess(void)
+{
+ PWR->CR |= (uint32_t)PWR_CR_DBP;
+}
+
+/**
+ * @brief Disables access to the backup domain (RTC registers, RTC
+ * backup data registers).
+ * @note If the HSE divided by 32 is used as the RTC clock, the
+ * Backup Domain Access should be kept enabled.
+ * @retval None
+ */
+void HAL_PWR_DisableBkUpAccess(void)
+{
+ PWR->CR &= ~((uint32_t)PWR_CR_DBP);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Exported_Functions_Group2 Peripheral Control functions
+ * @brief Low Power modes configuration functions
+ *
+@verbatim
+
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+
+ *** WakeUp pin configuration ***
+ ================================
+ [..]
+ (+) WakeUp pin is used to wakeup the system from Standby mode. This pin is
+ forced in input pull down configuration and is active on rising edges.
+ (+) There are two WakeUp pins, and up to eight Wakeup pins on STM32F07x & STM32F09x devices.
+ (++)WakeUp Pin 1 on PA.00.
+ (++)WakeUp Pin 2 on PC.13.
+ (++)WakeUp Pin 3 on PE.06.(STM32F07x/STM32F09x)
+ (++)WakeUp Pin 4 on PA.02.(STM32F07x/STM32F09x)
+ (++)WakeUp Pin 5 on PC.05.(STM32F07x/STM32F09x)
+ (++)WakeUp Pin 6 on PB.05.(STM32F07x/STM32F09x)
+ (++)WakeUp Pin 7 on PB.15.(STM32F07x/STM32F09x)
+ (++)WakeUp Pin 8 on PF.02.(STM32F07x/STM32F09x)
+
+ *** Low Power modes configuration ***
+ =====================================
+ [..]
+ The devices feature 3 low-power modes:
+ (+) Sleep mode: Cortex-M0 core stopped, peripherals kept running.
+ (+) Stop mode: all clocks are stopped, regulator running, regulator
+ in low power mode
+ (+) Standby mode: 1.2V domain powered off (mode not available on STM32F0x8 devices).
+
+ *** Sleep mode ***
+ ==================
+ [..]
+ (+) Entry:
+ The Sleep mode is entered by using the HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFx)
+ functions with
+ (++) PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction
+ (++) PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction
+
+ (+) Exit:
+ (++) Any peripheral interrupt acknowledged by the nested vectored interrupt
+ controller (NVIC) can wake up the device from Sleep mode.
+
+ *** Stop mode ***
+ =================
+ [..]
+ In Stop mode, all clocks in the 1.8V domain are stopped, the PLL, the HSI,
+ and the HSE RC oscillators are disabled. Internal SRAM and register contents
+ are preserved.
+ The voltage regulator can be configured either in normal or low-power mode.
+ To minimize the consumption.
+
+ (+) Entry:
+ The Stop mode is entered using the HAL_PWR_EnterSTOPMode(PWR_MAINREGULATOR_ON, PWR_STOPENTRY_WFI )
+ function with:
+ (++) Main regulator ON.
+ (++) Low Power regulator ON.
+ (++) PWR_STOPENTRY_WFI: enter STOP mode with WFI instruction
+ (++) PWR_STOPENTRY_WFE: enter STOP mode with WFE instruction
+ (+) Exit:
+ (++) Any EXTI Line (Internal or External) configured in Interrupt/Event mode.
+ (++) Some specific communication peripherals (CEC, USART, I2C) interrupts,
+ when programmed in wakeup mode (the peripheral must be
+ programmed in wakeup mode and the corresponding interrupt vector
+ must be enabled in the NVIC)
+
+ *** Standby mode ***
+ ====================
+ [..]
+ The Standby mode allows to achieve the lowest power consumption. It is based
+ on the Cortex-M0 deep sleep mode, with the voltage regulator disabled.
+ The 1.8V domain is consequently powered off. The PLL, the HSI oscillator and
+ the HSE oscillator are also switched off. SRAM and register contents are lost
+ except for the RTC registers, RTC backup registers and Standby circuitry.
+ The voltage regulator is OFF.
+
+ (+) Entry:
+ (++) The Standby mode is entered using the HAL_PWR_EnterSTANDBYMode() function.
+ (+) Exit:
+ (++) WKUP pin rising edge, RTC alarm (Alarm A), RTC wakeup,
+ tamper event, time-stamp event, external reset in NRST pin, IWDG reset.
+
+ *** Auto-wakeup (AWU) from low-power mode ***
+ =============================================
+ [..]
+ The MCU can be woken up from low-power mode by an RTC Alarm event, an RTC
+ Wakeup event, a tamper event, a time-stamp event, or a comparator event,
+ without depending on an external interrupt (Auto-wakeup mode).
+
+ (+) RTC auto-wakeup (AWU) from the Stop and Standby modes
+
+ (++) To wake up from the Stop mode with an RTC alarm event, it is necessary to
+ configure the RTC to generate the RTC alarm using the HAL_RTC_SetAlarm_IT() function.
+
+ (++) To wake up from the Stop mode with an RTC Tamper or time stamp event, it
+ is necessary to configure the RTC to detect the tamper or time stamp event using the
+ HAL_RTC_SetTimeStamp_IT() or HAL_RTC_SetTamper_IT() functions.
+
+ (++) To wake up from the Stop mode with an RTC WakeUp event, it is necessary to
+ configure the RTC to generate the RTC WakeUp event using the HAL_RTC_SetWakeUpTimer_IT() function.
+
+ (+) Comparator auto-wakeup (AWU) from the Stop mode
+
+ (++) To wake up from the Stop mode with a comparator wakeup event, it is necessary to:
+ (+++) Configure the EXTI Line associated with the comparator (example EXTI Line 22 for comparator 2)
+ to be sensitive to to the selected edges (falling, rising or falling
+ and rising) (Interrupt or Event modes) using the EXTI_Init() function.
+ (+++) Configure the comparator to generate the event.
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Enables the WakeUp PINx functionality.
+ * @param WakeUpPinx: Specifies the Power Wake-Up pin to enable.
+ * This parameter can be value of :
+ * @ref PWREx_WakeUp_Pins
+ * @retval None
+ */
+void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx)
+{
+ /* Check the parameters */
+ assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx));
+ PWR->CSR |= (PWR_CSR_EWUP1 << (uint8_t)WakeUpPinx);
+}
+
+/**
+ * @brief Disables the WakeUp PINx functionality.
+ * @param WakeUpPinx: Specifies the Power Wake-Up pin to disable.
+ * This parameter can be values of :
+ * @ref PWREx_WakeUp_Pins
+ * @retval None
+ */
+void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx)
+{
+ /* Check the parameters */
+ assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx));
+ PWR->CSR &= ~(PWR_CSR_EWUP1 << (uint8_t)WakeUpPinx);
+}
+
+/**
+ * @brief Enters Sleep mode.
+ * @note In Sleep mode, all I/O pins keep the same state as in Run mode.
+ * @param Regulator: Specifies the regulator state in SLEEP mode.
+ * On STM32F0 devices, this parameter is a dummy value and it is ignored
+ * as regulator can't be modified in this mode. Parameter is kept for platform
+ * compatibility.
+ * @param SLEEPEntry: Specifies if SLEEP mode is entered with WFI or WFE instruction.
+ * When WFI entry is used, tick interrupt have to be disabled if not desired as
+ * the interrupt wake up source.
+ * This parameter can be one of the following values:
+ * @arg PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction
+ * @arg PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction
+ * @retval None
+ */
+void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry)
+{
+ /* Check the parameters */
+ assert_param(IS_PWR_REGULATOR(Regulator));
+ assert_param(IS_PWR_SLEEP_ENTRY(SLEEPEntry));
+
+ /* Clear SLEEPDEEP bit of Cortex System Control Register */
+ SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP_Msk);
+
+ /* Select SLEEP mode entry -------------------------------------------------*/
+ if(SLEEPEntry == PWR_SLEEPENTRY_WFI)
+ {
+ /* Request Wait For Interrupt */
+ __WFI();
+ }
+ else
+ {
+ /* Request Wait For Event */
+ __SEV();
+ __WFE();
+ __WFE();
+ }
+}
+
+/**
+ * @brief Enters STOP mode.
+ * @note In Stop mode, all I/O pins keep the same state as in Run mode.
+ * @note When exiting Stop mode by issuing an interrupt or a wakeup event,
+ * the HSI RC oscillator is selected as system clock.
+ * @note When the voltage regulator operates in low power mode, an additional
+ * startup delay is incurred when waking up from Stop mode.
+ * By keeping the internal regulator ON during Stop mode, the consumption
+ * is higher although the startup time is reduced.
+ * @param Regulator: Specifies the regulator state in STOP mode.
+ * This parameter can be one of the following values:
+ * @arg PWR_MAINREGULATOR_ON: STOP mode with regulator ON
+ * @arg PWR_LOWPOWERREGULATOR_ON: STOP mode with low power regulator ON
+ * @param STOPEntry: specifies if STOP mode in entered with WFI or WFE instruction.
+ * This parameter can be one of the following values:
+ * @arg PWR_STOPENTRY_WFI:Enter STOP mode with WFI instruction
+ * @arg PWR_STOPENTRY_WFE: Enter STOP mode with WFE instruction
+ * @retval None
+ */
+void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_PWR_REGULATOR(Regulator));
+ assert_param(IS_PWR_STOP_ENTRY(STOPEntry));
+
+ /* Select the regulator state in STOP mode ---------------------------------*/
+ tmpreg = PWR->CR;
+
+ /* Clear PDDS and LPDS bits */
+ tmpreg &= (uint32_t)~(PWR_CR_PDDS | PWR_CR_LPDS);
+
+ /* Set LPDS bit according to Regulator value */
+ tmpreg |= Regulator;
+
+ /* Store the new value */
+ PWR->CR = tmpreg;
+
+ /* Set SLEEPDEEP bit of Cortex System Control Register */
+ SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk;
+
+ /* Select STOP mode entry --------------------------------------------------*/
+ if(STOPEntry == PWR_STOPENTRY_WFI)
+ {
+ /* Request Wait For Interrupt */
+ __WFI();
+ }
+ else
+ {
+ /* Request Wait For Event */
+ __SEV();
+ __WFE();
+ __WFE();
+ }
+
+ /* Reset SLEEPDEEP bit of Cortex System Control Register */
+ SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP_Msk);
+}
+
+/**
+ * @brief Enters STANDBY mode.
+ * @note In Standby mode, all I/O pins are high impedance except for:
+ * - Reset pad (still available)
+ * - RTC alternate function pins if configured for tamper, time-stamp, RTC
+ * Alarm out, or RTC clock calibration out.
+ * - WKUP pins if enabled.
+ * STM32F0x8 devices, the Stop mode is available, but it is
+ * aningless to distinguish between voltage regulator in Low power
+ * mode and voltage regulator in Run mode because the regulator
+ * not used and the core is supplied directly from an external source.
+ * Consequently, the Standby mode is not available on those devices.
+ * @retval None
+ */
+void HAL_PWR_EnterSTANDBYMode(void)
+{
+ /* Select STANDBY mode */
+ PWR->CR |= (uint32_t)PWR_CR_PDDS;
+
+ /* Set SLEEPDEEP bit of Cortex System Control Register */
+ SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk;
+
+ /* This option is used to ensure that store operations are completed */
+#if defined ( __CC_ARM)
+ __force_stores();
+#endif
+ /* Request Wait For Interrupt */
+ __WFI();
+}
+
+/**
+ * @brief Indicates Sleep-On-Exit when returning from Handler mode to Thread mode.
+ * @note Set SLEEPONEXIT bit of SCR register. When this bit is set, the processor
+ * re-enters SLEEP mode when an interruption handling is over.
+ * Setting this bit is useful when the processor is expected to run only on
+ * interruptions handling.
+ * @retval None
+ */
+void HAL_PWR_EnableSleepOnExit(void)
+{
+ /* Set SLEEPONEXIT bit of Cortex System Control Register */
+ SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
+}
+
+
+/**
+ * @brief Disables Sleep-On-Exit feature when returning from Handler mode to Thread mode.
+ * @note Clears SLEEPONEXIT bit of SCR register. When this bit is set, the processor
+ * re-enters SLEEP mode when an interruption handling is over.
+ * @retval None
+ */
+void HAL_PWR_DisableSleepOnExit(void)
+{
+ /* Clear SLEEPONEXIT bit of Cortex System Control Register */
+ CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
+}
+
+
+
+/**
+ * @brief Enables CORTEX M4 SEVONPEND bit.
+ * @note Sets SEVONPEND bit of SCR register. When this bit is set, this causes
+ * WFE to wake up when an interrupt moves from inactive to pended.
+ * @retval None
+ */
+void HAL_PWR_EnableSEVOnPend(void)
+{
+ /* Set SEVONPEND bit of Cortex System Control Register */
+ SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
+}
+
+
+/**
+ * @brief Disables CORTEX M4 SEVONPEND bit.
+ * @note Clears SEVONPEND bit of SCR register. When this bit is set, this causes
+ * WFE to wake up when an interrupt moves from inactive to pended.
+ * @retval None
+ */
+void HAL_PWR_DisableSEVOnPend(void)
+{
+ /* Clear SEVONPEND bit of Cortex System Control Register */
+ CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_PWR_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/src/stm32f0xx_hal_pwr_ex.c b/f0/src/stm32f0xx_hal_pwr_ex.c
new file mode 100755
index 0000000000000000000000000000000000000000..4c68e0d9cf26839d684ec06840fa654a1cb7bb20
--- /dev/null
+++ b/f0/src/stm32f0xx_hal_pwr_ex.c
@@ -0,0 +1,292 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_pwr_ex.c
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief Extended PWR HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Power Controller (PWR) peripheral:
+ * + Extended Initialization and de-initialization functions
+ * + Extended Peripheral Control functions
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup PWREx PWREx Extended HAL module driver
+ * @brief PWREx HAL module driver
+ * @{
+ */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup PWREx_Private_Constants PWREx Private Constants
+ * @{
+ */
+#define PVD_MODE_IT ((uint32_t)0x00010000)
+#define PVD_MODE_EVT ((uint32_t)0x00020000)
+#define PVD_RISING_EDGE ((uint32_t)0x00000001)
+#define PVD_FALLING_EDGE ((uint32_t)0x00000002)
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup PWREx_Exported_Functions PWREx Exported Functions
+ * @{
+ */
+
+/** @defgroup PWREx_Exported_Functions_Group1 Peripheral Extended Control Functions
+ * @brief Extended Peripheral Control functions
+ *
+@verbatim
+
+ ===============================================================================
+ ##### Peripheral extended control functions #####
+ ===============================================================================
+
+ *** PVD configuration ***
+ =========================
+ [..]
+ (+) The PVD is used to monitor the VDD power supply by comparing it to a
+ threshold selected by the PVD Level (PLS[2:0] bits in the PWR_CR).
+ (+) A PVDO flag is available to indicate if VDD/VDDA is higher or lower
+ than the PVD threshold. This event is internally connected to the EXTI
+ line16 and can generate an interrupt if enabled. This is done through
+ HAL_PWR_PVDConfig(), HAL_PWR_EnablePVD() functions.
+ (+) The PVD is stopped in Standby mode.
+ -@- PVD is not available on STM32F030x4/x6/x8
+
+ *** VDDIO2 Monitor Configuration ***
+ ====================================
+ [..]
+ (+) VDDIO2 monitor is used to monitor the VDDIO2 power supply by comparing it
+ to VREFInt Voltage
+ (+) This monitor is internally connected to the EXTI line31
+ and can generate an interrupt if enabled. This is done through
+ HAL_PWR_EnableVddio2Monitor() function.
+ -@- VDDIO2 is available on STM32F07x/09x/04x
+
+@endverbatim
+ * @{
+ */
+
+#if defined (STM32F031x6) || defined (STM32F051x8) || \
+ defined (STM32F071xB) || defined (STM32F091xC) || \
+ defined (STM32F042x6) || defined (STM32F072xB)
+/**
+ * @brief Configures the voltage threshold detected by the Power Voltage Detector(PVD).
+ * @param sConfigPVD: pointer to an PWR_PVDTypeDef structure that contains the configuration
+ * information for the PVD.
+ * @note Refer to the electrical characteristics of your device datasheet for
+ * more details about the voltage threshold corresponding to each
+ * detection level.
+ * @retval None
+ */
+void HAL_PWR_PVDConfig(PWR_PVDTypeDef *sConfigPVD)
+{
+ /* Check the parameters */
+ assert_param(IS_PWR_PVD_LEVEL(sConfigPVD->PVDLevel));
+ assert_param(IS_PWR_PVD_MODE(sConfigPVD->Mode));
+
+ /* Set PLS[7:5] bits according to PVDLevel value */
+ MODIFY_REG(PWR->CR, PWR_CR_PLS, sConfigPVD->PVDLevel);
+
+ /* Clear any previous config. Keep it clear if no event or IT mode is selected */
+ __HAL_PWR_PVD_EXTI_DISABLE_EVENT();
+ __HAL_PWR_PVD_EXTI_DISABLE_IT();
+ __HAL_PWR_PVD_EXTI_CLEAR_EGDE_TRIGGER();
+
+ /* Configure interrupt mode */
+ if((sConfigPVD->Mode & PVD_MODE_IT) == PVD_MODE_IT)
+ {
+ __HAL_PWR_PVD_EXTI_ENABLE_IT();
+ }
+
+ /* Configure event mode */
+ if((sConfigPVD->Mode & PVD_MODE_EVT) == PVD_MODE_EVT)
+ {
+ __HAL_PWR_PVD_EXTI_ENABLE_EVENT();
+ }
+
+ /* Configure the edge */
+ if((sConfigPVD->Mode & PVD_RISING_EDGE) == PVD_RISING_EDGE)
+ {
+ __HAL_PWR_PVD_EXTI_SET_RISING_EDGE_TRIGGER();
+ }
+
+ if((sConfigPVD->Mode & PVD_FALLING_EDGE) == PVD_FALLING_EDGE)
+ {
+ __HAL_PWR_PVD_EXTI_SET_FALLING_EGDE_TRIGGER();
+ }
+}
+
+/**
+ * @brief Enables the Power Voltage Detector(PVD).
+ * @retval None
+ */
+void HAL_PWR_EnablePVD(void)
+{
+ PWR->CR |= (uint32_t)PWR_CR_PVDE;
+}
+
+/**
+ * @brief Disables the Power Voltage Detector(PVD).
+ * @retval None
+ */
+void HAL_PWR_DisablePVD(void)
+{
+ PWR->CR &= ~((uint32_t)PWR_CR_PVDE);
+}
+
+/**
+ * @brief This function handles the PWR PVD interrupt request.
+ * @note This API should be called under the PVD_IRQHandler() or PVD_VDDIO2_IRQHandler().
+ * @retval None
+ */
+void HAL_PWR_PVD_IRQHandler(void)
+{
+ /* Check PWR exti flag */
+ if(__HAL_PWR_PVD_EXTI_GET_FLAG() != RESET)
+ {
+ /* PWR PVD interrupt user callback */
+ HAL_PWR_PVDCallback();
+
+ /* Clear PWR Exti pending bit */
+ __HAL_PWR_PVD_EXTI_CLEAR_FLAG();
+ }
+}
+
+/**
+ * @brief PWR PVD interrupt callback
+ * @retval None
+ */
+__weak void HAL_PWR_PVDCallback(void)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PWR_PVDCallback could be implemented in the user file
+ */
+}
+
+#endif /* defined (STM32F031x6) || defined (STM32F051x8) || */
+ /* defined (STM32F071xB) || defined (STM32F091xC) || */
+ /* defined (STM32F042x6) || defined (STM32F072xB) */
+
+#if defined (STM32F042x6) || defined (STM32F048xx) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+ defined (STM32F091xC) || defined (STM32F098xx)
+/**
+ * @brief Enable VDDIO2 monitor: enable Exti 31 and falling edge detection.
+ * @note If Exti 31 is enable correlty and VDDIO2 voltage goes below Vrefint,
+ an interrupt is generated Irq line 1.
+ NVIS has to be enable by user.
+ * @retval None
+ */
+void HAL_PWR_EnableVddio2Monitor(void)
+{
+ __HAL_PWR_VDDIO2_EXTI_ENABLE_IT();
+ __HAL_PWR_VDDIO2_EXTI_SET_FALLING_EGDE_TRIGGER();
+}
+
+/**
+ * @brief Disable the Vddio2 Monitor.
+ * @retval None
+ */
+void HAL_PWR_DisableVddio2Monitor(void)
+{
+ __HAL_PWR_VDDIO2_EXTI_DISABLE_IT();
+ __HAL_PWR_VDDIO2_EXTI_CLEAR_EGDE_TRIGGER();
+
+}
+
+/**
+ * @brief This function handles the PWR Vddio2 monitor interrupt request.
+ * @note This API should be called under the VDDIO2_IRQHandler() PVD_VDDIO2_IRQHandler().
+ * @retval None
+ */
+void HAL_PWR_Vddio2Monitor_IRQHandler(void)
+{
+ /* Check PWR exti flag */
+ if(__HAL_PWR_VDDIO2_EXTI_GET_FLAG() != RESET)
+ {
+ /* PWR Vddio2 monitor interrupt user callback */
+ HAL_PWR_Vddio2MonitorCallback();
+
+ /* Clear PWR Exti pending bit */
+ __HAL_PWR_VDDIO2_EXTI_CLEAR_FLAG();
+ }
+}
+
+/**
+ * @brief PWR Vddio2 Monitor interrupt callback
+ * @retval None
+ */
+__weak void HAL_PWR_Vddio2MonitorCallback(void)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PWR_Vddio2MonitorCallback could be implemented in the user file
+ */
+}
+
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+ defined (STM32F091xC) || defined (STM32F098xx) */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_PWR_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/src/stm32f0xx_hal_rcc.c b/f0/src/stm32f0xx_hal_rcc.c
new file mode 100755
index 0000000000000000000000000000000000000000..28ae1e4a45cbf4fc56a11ce7d7e69636ac5ddb74
--- /dev/null
+++ b/f0/src/stm32f0xx_hal_rcc.c
@@ -0,0 +1,628 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_rcc.c
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief RCC HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Reset and Clock Control (RCC) peripheral:
+ * + Initialization and de-initialization functions
+ * + Peripheral Control functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### RCC specific features #####
+ ==============================================================================
+ [..]
+ After reset the device is running from Internal High Speed oscillator
+ (HSI 8MHz) with Flash 0 wait state, Flash prefetch buffer is disabled,
+ and all peripherals are off except internal SRAM, Flash and JTAG.
+ (+) There is no prescaler on High speed (AHB) and Low speed (APB) busses;
+ all peripherals mapped on these busses are running at HSI speed.
+ (+) The clock for all peripherals is switched off, except the SRAM and FLASH.
+ (+) All GPIOs are in input floating state, except the JTAG pins which
+ are assigned to be used for debug purpose.
+ [..] Once the device started from reset, the user application has to:
+ (+) Configure the clock source to be used to drive the System clock
+ (if the application needs higher frequency/performance)
+ (+) Configure the System clock frequency and Flash settings
+ (+) Configure the AHB and APB busses prescalers
+ (+) Enable the clock for the peripheral(s) to be used
+ (+) Configure the clock source(s) for peripherals which clocks are not
+ derived from the System clock (RTC, ADC, I2C, USART, TIM, USB FS, etc..)
+
+ ##### RCC Limitations #####
+ ==============================================================================
+ [..]
+ A delay between an RCC peripheral clock enable and the effective peripheral
+ enabling should be taken into account in order to manage the peripheral read/write
+ from/to registeres.
+ (+) This delay depends on the peripheral mapping.
+ (+) If peripheral is mapped on AHB: the delay is 2 AHB clock cycle
+ after the clock enable bit is set on the hardware register
+ (+) If peripheral is mapped on APB: the delay is 2 APB clock cycle
+ after the clock enable bit is set on the hardware register
+
+ [..]
+ Possible Workarounds:
+ (#) Enable the peripheral clock sometimes before the peripheral read/write
+ register is required.
+ (#) For AHB peripheral, insert two dummy read to the peripheral register.
+ (#) For APB peripheral, insert a dummy read to the peripheral register.
+
+@endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup RCC RCC HAL module driver
+ * @brief RCC HAL module driver
+ * @{
+ */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup RCC_Private_Define RCC Private Define
+ * @{
+ */
+#define RCC_CFGR_HPRE_BITNUMBER 4
+#define RCC_CFGR_PPRE_BITNUMBER 8
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup RCC_Private_Macros RCC Private Macros
+ * @{
+ */
+#define __MCO_CLK_ENABLE() __GPIOA_CLK_ENABLE()
+#define MCO_GPIO_PORT GPIOA
+#define MCO_PIN GPIO_PIN_8
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup RCC_Private_Variables RCC Private Variables
+ * @{
+ */
+const uint8_t APBAHBPrescTable[16] = {0, 0, 0, 0, 1, 2, 3, 4, 1, 2, 3, 4, 6, 7, 8, 9};
+/**
+ * @}
+ */
+
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup RCC_Exported_Functions RCC Exported Functions
+ * @{
+ */
+
+/** @defgroup RCC_Exported_Functions_Group1 Initialization/de-initialization function
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization function #####
+ ===============================================================================
+ [..]
+ This section provide functions allowing to configure the internal/external oscillators
+ (HSE, HSI, HSI14, HSI48, LSE, LSI, PLL, CSS and MCO) and the System busses clocks (SYSCLK,
+ AHB and APB1).
+
+ [..] Internal/external clock and PLL configuration
+ (#) HSI (high-speed internal), 8 MHz factory-trimmed RC used directly or through
+ the PLL as System clock source.
+ The HSI clock can be used also to clock the USART and I2C peripherals.
+
+ (#) HSI14 (high-speed internal), 14 MHz factory-trimmed RC used directly to clock
+ the ADC peripheral.
+
+ (#) LSI (low-speed internal), 40 KHz low consumption RC used as IWDG and/or RTC
+ clock source.
+
+ (#) HSE (high-speed external), 4 to 32 MHz crystal oscillator used directly or
+ through the PLL as System clock source. Can be used also as RTC clock source.
+
+ (#) LSE (low-speed external), 32 KHz oscillator used as RTC clock source.
+
+ (#) PLL (clocked by HSI, HSI48 or HSE), featuring different output clocks:
+ (++) The first output is used to generate the high speed system clock (up to 48 MHz)
+ (++) The second output is used to generate the clock for the USB FS (48 MHz)
+ (++) The third output may be used to generate the clock for the TIM, I2C and USART
+ peripherals (up to 48 MHz)
+
+ (#) CSS (Clock security system), once enable using the macro __HAL_RCC_CSS_ENABLE()
+ and if a HSE clock failure occurs(HSE used directly or through PLL as System
+ clock source), the System clockis automatically switched to HSI and an interrupt
+ is generated if enabled. The interrupt is linked to the Cortex-M0 NMI
+ (Non-Maskable Interrupt) exception vector.
+
+ (#) MCO (microcontroller clock output), used to output SYSCLK, HSI, HSE, LSI, LSE or PLL
+ clock (divided by 2) output on pin (such as PA8 pin).
+
+ [..] System, AHB and APB busses clocks configuration
+ (#) Several clock sources can be used to drive the System clock (SYSCLK): HSI,
+ HSE and PLL.
+ The AHB clock (HCLK) is derived from System clock through configurable
+ prescaler and used to clock the CPU, memory and peripherals mapped
+ on AHB bus (DMA, GPIO...). APB1 (PCLK1) clock is derived
+ from AHB clock through configurable prescalers and used to clock
+ the peripherals mapped on these busses. You can use
+ "HAL_RCC_GetSysClockFreq()" function to retrieve the frequencies of these clocks.
+
+ (#) All the peripheral clocks are derived from the System clock (SYSCLK) except:
+ (++) The FLASH program/erase clock which is always HSI 8MHz clock.
+ (++) The USB 48 MHz clock which is derived from the PLL VCO clock.
+ (++) The USART clock which can be derived as well from HSI 8MHz, LSI or LSE.
+ (++) The I2C clock which can be derived as well from HSI 8MHz clock.
+ (++) The ADC clock which is derived from PLL output.
+ (++) The RTC clock which is derived from the LSE, LSI or 1 MHz HSE_RTC
+ (HSE divided by a programmable prescaler). The System clock (SYSCLK)
+ frequency must be higher or equal to the RTC clock frequency.
+ (++) IWDG clock which is always the LSI clock.
+
+ (#) For the STM32F0xx devices, the maximum frequency of the SYSCLK, HCLK and PCLK1 is 48 MHz,
+ Depending on the SYSCLK frequency, the flash latency should be adapted accordingly:
+ +-----------------------------------------------+
+ | Latency | SYSCLK clock frequency (MHz) |
+ |---------------|-------------------------------|
+ |0WS(1CPU cycle)| 0 < SYSCLK <= 24 |
+ |---------------|-------------------------------|
+ |1WS(2CPU cycle)| 24 < SYSCLK <= 48 |
+ +-----------------------------------------------+
+
+ (#) After reset, the System clock source is the HSI (8 MHz) with 0 WS and
+ prefetch is disabled.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Resets the RCC clock configuration to the default reset state.
+ * @note The default reset state of the clock configuration is given below:
+ * - HSI ON and used as system clock source
+ * - HSE and PLL OFF
+ * - AHB, APB1 prescaler set to 1.
+ * - CSS, MCO OFF
+ * - All interrupts disabled
+ * @note This function doesn't modify the configuration of the
+ * - Peripheral clocks
+ * - LSI, LSE and RTC clocks
+ * @retval None
+ */
+void HAL_RCC_DeInit(void)
+{
+ /* Set HSION bit, HSITRIM[4:0] bits to the reset value*/
+ SET_BIT(RCC->CR, RCC_CR_HSION | RCC_CR_HSITRIM_4);
+
+ /* Reset SW[1:0], HPRE[3:0], PPRE[2:0] and MCOSEL[2:0] bits */
+ CLEAR_BIT(RCC->CFGR, RCC_CFGR_SW | RCC_CFGR_HPRE | RCC_CFGR_PPRE | RCC_CFGR_MCO);
+
+ /* Reset HSEON, CSSON, PLLON bits */
+ CLEAR_BIT(RCC->CR, RCC_CR_PLLON | RCC_CR_CSSON | RCC_CR_HSEON);
+
+ /* Reset HSEBYP bit */
+ CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP);
+
+ /* Reset CFGR register */
+ CLEAR_REG(RCC->CFGR);
+
+ /* Reset CFGR2 register */
+ CLEAR_REG(RCC->CFGR2);
+
+ /* Reset CFGR3 register */
+ CLEAR_REG(RCC->CFGR3);
+
+ /* Disable all interrupts */
+ CLEAR_REG(RCC->CIR);
+}
+
+/**
+ * @brief Initializes the RCC Oscillators according to the specified parameters in the
+ * RCC_OscInitTypeDef.
+ * @param RCC_OscInitStruct: pointer to an RCC_OscInitTypeDef structure that
+ * contains the configuration information for the RCC Oscillators.
+ * @note The PLL is not disabled when used as system clock.
+ * @retval HAL status
+ */
+__weak HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
+{
+ /* Note : This function is defined into this file for library reference. */
+ /* Function content is located into file stm32f0xx_hal_rcc_ex.c to */
+ /* handle the possible oscillators present in STM32F0xx devices */
+
+ /* Return error status as not implemented here */
+ return HAL_ERROR;
+}
+
+/**
+ * @brief Initializes the CPU, AHB and APB busses clocks according to the specified
+ * parameters in the RCC_ClkInitStruct.
+ * @param RCC_ClkInitStruct: pointer to an RCC_OscInitTypeDef structure that
+ * contains the configuration information for the RCC peripheral.
+ * @param FLatency: FLASH Latency
+ * This parameter can be one of the following values:
+ * @arg FLASH_LATENCY_0: FLASH 0 Latency cycle
+ * @arg FLASH_LATENCY_1: FLASH 1 Latency cycle
+ *
+ * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency
+ * and updated by HAL_RCC_GetHCLKFreq() function called within this function
+ *
+ * @note The HSI is used (enabled by hardware) as system clock source after
+ * startup from Reset, wake-up from STOP and STANDBY mode, or in case
+ * of failure of the HSE used directly or indirectly as system clock
+ * (if the Clock Security System CSS is enabled).
+ *
+ * @note A switch from one clock source to another occurs only if the target
+ * clock source is ready (clock stable after startup delay or PLL locked).
+ * If a clock source which is not yet ready is selected, the switch will
+ * occur when the clock source will be ready.
+ * @retval HAL status
+ */
+__weak HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency)
+{
+ /* Note : This function is defined into this file for library reference. */
+ /* Function content is located into file stm32f0xx_hal_rcc_ex.c to */
+ /* handle the possible oscillators present in STM32F0xx devices */
+
+ /* Return error status as not implemented here */
+ return HAL_ERROR;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Exported_Functions_Group2 Peripheral Control function
+ * @brief RCC clocks control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control function #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the RCC Clocks
+ frequencies.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Selects the clock source to output on MCO pin(such as PA8).
+ * @note MCO pin (such as PA8) should be configured in alternate function mode.
+ * @param RCC_MCOx: specifies the output direction for the clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_MCO: Clock source to output on MCO pin(such as PA8).
+ * @param RCC_MCOSource: specifies the clock source to output.
+ * This parameter can be one of the following values:
+ * @arg RCC_MCOSOURCE_LSI: LSI clock selected as MCO source
+ * @arg RCC_MCOSOURCE_HSI: HSI clock selected as MCO source
+ * @arg RCC_MCOSOURCE_LSE: LSE clock selected as MCO source
+ * @arg RCC_MCOSOURCE_HSE: HSE clock selected as MCO source
+ * @arg RCC_MCOSOURCE_PLLCLK_NODIV: main PLL clock not divided selected as MCO source (not applicable to STM32F05x devices)
+ * @arg RCC_MCOSOURCE_PLLCLK_DIV2: main PLL clock divided by 2 selected as MCO source
+ * @arg RCC_MCOSOURCE_SYSCLK: System clock (SYSCLK) selected as MCO source
+ * @param RCC_MCODiv: specifies the MCOx prescaler.
+ * This parameter can be one of the following values:
+ * @arg RCC_MCO_NODIV: no division applied to MCO clock
+ * @retval None
+ */
+void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv)
+{
+ GPIO_InitTypeDef gpio;
+ /* Check the parameters */
+ assert_param(IS_RCC_MCO(RCC_MCOx));
+ assert_param(IS_RCC_MCODIV(RCC_MCODiv));
+ /* RCC_MCO */
+ assert_param(IS_RCC_MCOSOURCE(RCC_MCOSource));
+
+ /* MCO Clock Enable */
+ __MCO_CLK_ENABLE();
+
+ /* Configue the MCO pin in alternate function mode */
+ gpio.Pin = MCO_PIN;
+ gpio.Mode = GPIO_MODE_AF_PP;
+ gpio.Speed = GPIO_SPEED_HIGH;
+ gpio.Pull = GPIO_NOPULL;
+ gpio.Alternate = GPIO_AF0_MCO;
+ HAL_GPIO_Init(MCO_GPIO_PORT, &gpio);
+
+ /* Configure the MCO clock source */
+ __HAL_RCC_MCO_CONFIG(RCC_MCOSource, RCC_MCODiv);
+}
+
+/**
+ * @brief Enables the Clock Security System.
+ * @note If a failure is detected on the HSE oscillator clock, this oscillator
+ * is automatically disabled and an interrupt is generated to inform the
+ * software about the failure (Clock Security System Interrupt, CSSI),
+ * allowing the MCU to perform rescue operations. The CSSI is linked to
+ * the Cortex-M0 NMI (Non-Maskable Interrupt) exception vector.
+ * @retval None
+ */
+void HAL_RCC_EnableCSS(void)
+{
+ SET_BIT(RCC->CR, RCC_CR_CSSON);
+}
+
+/**
+ * @brief Disables the Clock Security System.
+ * @retval None
+ */
+void HAL_RCC_DisableCSS(void)
+{
+ CLEAR_BIT(RCC->CR, RCC_CR_CSSON);
+}
+
+/**
+ * @brief Returns the SYSCLK frequency
+ * @note The system frequency computed by this function is not the real
+ * frequency in the chip. It is calculated based on the predefined
+ * constant and the selected clock source:
+ * @note If SYSCLK source is HSI, function returns a value based on HSI_VALUE(*)
+ * @note If SYSCLK source is HSI48, function returns a value based on HSI48_VALUE(*)
+ * @note If SYSCLK source is HSE, function returns a value based on HSE_VALUE
+ * divided by PREDIV factor(**)
+ * @note If SYSCLK source is PLL, function returns a value based on HSE_VALUE
+ * divided by PREDIV factor(**) or depending on STM32F0xx devices either a value based
+ * on HSI_VALUE divided by 2 or HSI_VALUE divided by PREDIV factor(*) multiplied by the
+ * PLL factor .
+ * @note (*) HSI_VALUE & HSI48_VALUE are constants defined in stm32f0xx_hal_conf.h file
+ * (default values 8 MHz and 48MHz).
+ * @note (**) HSE_VALUE is a constant defined in stm32f0xx_hal_conf.h file (default value
+ * 8 MHz), user has to ensure that HSE_VALUE is same as the real
+ * frequency of the crystal used. Otherwise, this function may
+ * have wrong result.
+ *
+ * @note The result of this function could be not correct when using fractional
+ * value for HSE crystal.
+ *
+ * @note This function can be used by the user application to compute the
+ * baudrate for the communication peripherals or configure other parameters.
+ *
+ * @note Each time SYSCLK changes, this function must be called to update the
+ * right SYSCLK value. Otherwise, any configuration based on this function will be incorrect.
+ *
+ * @retval SYSCLK frequency
+ */
+__weak uint32_t HAL_RCC_GetSysClockFreq(void)
+{
+ /* Note : This function is defined into this file for library reference. */
+ /* Function content is located into file stm32f0xx_hal_rcc_ex.c to */
+ /* handle the possible oscillators present in STM32F0xx devices */
+
+ /* Return error status as not implemented here */
+ return HAL_ERROR;
+}
+
+/**
+ * @brief Returns the HCLK frequency
+ * @note Each time HCLK changes, this function must be called to update the
+ * right HCLK value. Otherwise, any configuration based on this function will be incorrect.
+ *
+ * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency
+ * and updated within this function
+ *
+ * @retval HCLK frequency
+ */
+uint32_t HAL_RCC_GetHCLKFreq(void)
+{
+ SystemCoreClock = HAL_RCC_GetSysClockFreq() >> APBAHBPrescTable[(RCC->CFGR & RCC_CFGR_HPRE)>> RCC_CFGR_HPRE_BITNUMBER];
+ return SystemCoreClock;
+}
+
+/**
+ * @brief Returns the PCLK1 frequency
+ * @note Each time PCLK1 changes, this function must be called to update the
+ * right PCLK1 value. Otherwise, any configuration based on this function will be incorrect.
+ * @retval PCLK1 frequency
+ */
+uint32_t HAL_RCC_GetPCLK1Freq(void)
+{
+ /* Get HCLK source and Compute PCLK1 frequency ---------------------------*/
+ return (HAL_RCC_GetHCLKFreq() >> APBAHBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE)>> RCC_CFGR_PPRE_BITNUMBER]);
+}
+
+/**
+ * @brief Configures the RCC_OscInitStruct according to the internal
+ * RCC configuration registers.
+ * @param RCC_OscInitStruct: pointer to an RCC_OscInitTypeDef structure that
+ * will be configured.
+ * @retval None
+ */
+void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
+{
+ /* Set all possible values for the Oscillator type parameter ---------------*/
+ RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI;
+
+ /* Get the HSE configuration -----------------------------------------------*/
+ if((RCC->CR & RCC_CR_HSEBYP) == RCC_CR_HSEBYP)
+ {
+ RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS;
+ }
+ else if((RCC->CR & RCC_CR_HSEON) == RCC_CR_HSEON)
+ {
+ RCC_OscInitStruct->HSEState = RCC_HSE_ON;
+ }
+ else
+ {
+ RCC_OscInitStruct->HSEState = RCC_HSE_OFF;
+ }
+
+ /* Get the HSI configuration -----------------------------------------------*/
+ if((RCC->CR & RCC_CR_HSION) == RCC_CR_HSION)
+ {
+ RCC_OscInitStruct->HSIState = RCC_HSI_ON;
+ }
+ else
+ {
+ RCC_OscInitStruct->HSIState = RCC_HSI_OFF;
+ }
+
+ RCC_OscInitStruct->HSICalibrationValue = (uint32_t)((RCC->CR &RCC_CR_HSITRIM) >> RCC_CR_HSITRIM_BitNumber);
+
+ /* Get the LSE configuration -----------------------------------------------*/
+ if((RCC->BDCR & RCC_BDCR_LSEBYP) == RCC_BDCR_LSEBYP)
+ {
+ RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS;
+ }
+ else if((RCC->BDCR & RCC_BDCR_LSEON) == RCC_BDCR_LSEON)
+ {
+ RCC_OscInitStruct->LSEState = RCC_LSE_ON;
+ }
+ else
+ {
+ RCC_OscInitStruct->LSEState = RCC_LSE_OFF;
+ }
+
+ /* Get the LSI configuration -----------------------------------------------*/
+ if((RCC->CSR & RCC_CSR_LSION) == RCC_CSR_LSION)
+ {
+ RCC_OscInitStruct->LSIState = RCC_LSI_ON;
+ }
+ else
+ {
+ RCC_OscInitStruct->LSIState = RCC_LSI_OFF;
+ }
+
+ /* Get the PLL configuration -----------------------------------------------*/
+ if((RCC->CR & RCC_CR_PLLON) == RCC_CR_PLLON)
+ {
+ RCC_OscInitStruct->PLL.PLLState = RCC_PLL_ON;
+ }
+ else
+ {
+ RCC_OscInitStruct->PLL.PLLState = RCC_PLL_OFF;
+ }
+ RCC_OscInitStruct->PLL.PLLSource = (uint32_t)(RCC->CFGR & RCC_CFGR_PLLSRC);
+ RCC_OscInitStruct->PLL.PLLMUL = (uint32_t)(RCC->CFGR & RCC_CFGR_PLLMUL);
+ RCC_OscInitStruct->PLL.PREDIV = (uint32_t)(RCC->CFGR2 & RCC_CFGR2_PREDIV);
+
+ /* Get the HSI14 configuration -----------------------------------------------*/
+ if((RCC->CR2 & RCC_CR2_HSI14ON) == RCC_CR2_HSI14ON)
+ {
+ RCC_OscInitStruct->HSI14State = RCC_HSI_ON;
+ }
+ else
+ {
+ RCC_OscInitStruct->HSI14State = RCC_HSI_OFF;
+ }
+
+ RCC_OscInitStruct->HSI14CalibrationValue = (uint32_t)((RCC->CR2 & RCC_CR2_HSI14TRIM) >> RCC_CR2_HSI14TRIM_BitNumber);
+
+ /* Get the HSI48 configuration if any-----------------------------------------*/
+ RCC_OscInitStruct->HSI48State = __HAL_RCC_GET_HSI48_STATE();
+}
+
+/**
+ * @brief Get the RCC_ClkInitStruct according to the internal
+ * RCC configuration registers.
+ * @param RCC_ClkInitStruct: pointer to an RCC_ClkInitTypeDef structure that
+ * contains the current clock configuration.
+ * @param pFLatency: Pointer on the Flash Latency.
+ * @retval None
+ */
+void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency)
+{
+ /* Set all possible values for the Clock type parameter --------------------*/
+ RCC_ClkInitStruct->ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1;
+
+ /* Get the SYSCLK configuration --------------------------------------------*/
+ RCC_ClkInitStruct->SYSCLKSource = (uint32_t)(RCC->CFGR & RCC_CFGR_SW);
+
+ /* Get the HCLK configuration ----------------------------------------------*/
+ RCC_ClkInitStruct->AHBCLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_HPRE);
+
+ /* Get the APB1 configuration ----------------------------------------------*/
+ RCC_ClkInitStruct->APB1CLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_PPRE);
+
+ /* Get the Flash Wait State (Latency) configuration ------------------------*/
+ *pFLatency = (uint32_t)(FLASH->ACR & FLASH_ACR_LATENCY);
+}
+
+/**
+ * @brief This function handles the RCC CSS interrupt request.
+ * @note This API should be called under the NMI_Handler().
+ * @retval None
+ */
+void HAL_RCC_NMI_IRQHandler(void)
+{
+ /* Check RCC CSSF flag */
+ if(__HAL_RCC_GET_IT(RCC_IT_CSS))
+ {
+ /* RCC Clock Security System interrupt user callback */
+ HAL_RCC_CCSCallback();
+
+ /* Clear RCC CSS pending bit */
+ __HAL_RCC_CLEAR_IT(RCC_IT_CSS);
+ }
+}
+
+/**
+ * @brief RCC Clock Security System interrupt callback
+ * @retval none
+ */
+__weak void HAL_RCC_CCSCallback(void)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_RCC_CCSCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_RCC_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/src/stm32f0xx_hal_rcc_ex.c b/f0/src/stm32f0xx_hal_rcc_ex.c
new file mode 100755
index 0000000000000000000000000000000000000000..c34b70c3f05f10ce0bb653a2538464c0b7482d3d
--- /dev/null
+++ b/f0/src/stm32f0xx_hal_rcc_ex.c
@@ -0,0 +1,1407 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_rcc_ex.c
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief Extended RCC HAL module driver
+ * This file provides firmware functions to manage the following
+ * functionalities RCC extension peripheral:
+ * + Extended Clock Source configuration functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+
+ For CRS, RCC Extention HAL driver can be used as follows:
+
+ (#) In System clock config, HSI48 need to be enabled
+
+ (#] Enable CRS clock in IP MSP init which will use CRS functions
+
+ (#) Call CRS functions like this
+ (##) Prepare synchronization configuration necessary for HSI48 calibration
+ (+++) Default values can be set for frequency Error Measurement (reload and error limit)
+ and also HSI48 oscillator smooth trimming.
+ (+++) Macro __HAL_RCC_CRS_CALCULATE_RELOADVALUE can be also used to calculate
+ directly reload value with target and sychronization frequencies values
+ (##) Call function HAL_RCCEx_CRSConfig which
+ (+++) Reset CRS registers to their default values.
+ (+++) Configure CRS registers with synchronization configuration
+ (+++) Enable automatic calibration and frequency error counter feature
+
+ (##) A polling function is provided to wait for complete Synchronization
+ (+++) Call function HAL_RCCEx_CRSWaitSynchronization()
+ (+++) According to CRS status, user can decide to adjust again the calibration or continue
+ application if synchronization is OK
+
+ (#) User can retrieve information related to synchronization in calling function
+ HAL_RCCEx_CRSGetSynchronizationInfo()
+
+ (#) Regarding synchronization status and synchronization information, user can try a new calibration
+ in changing synchronization configuration and call again HAL_RCCEx_CRSConfig.
+ Note: When the SYNC event is detected during the downcounting phase (before reaching the zero value),
+ it means that the actual frequency is lower than the target (and so, that the TRIM value should be
+ incremented), while when it is detected during the upcounting phase it means that the actual frequency
+ is higher (and that the TRIM value should be decremented).
+
+ (#) To use IT mode, user needs to handle it in calling different macros available to do it
+ (__HAL_RCC_CRS_XXX_IT). Interuptions will go through RCC Handler (RCC_IRQn/RCC_CRS_IRQHandler)
+ (++) Call function HAL_RCCEx_CRSConfig()
+ (++) Enable RCC_IRQn (thnaks to NVIC functions)
+ (++) Enable CRS IT (__HAL_RCC_CRS_ENABLE_IT)
+ (++) Implement CRS status management in RCC_CRS_IRQHandler
+
+ (#) To force a SYNC EVENT, user can use function HAL_RCCEx_CRSSoftwareSynchronizationGenerate(). Function can be
+ called before calling HAL_RCCEx_CRSConfig (for instance in Systick handler)
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup RCCEx RCCEx Extended HAL module driver
+ * @brief RCC Extension HAL module driver.
+ * @{
+ */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup RCCEx_Private_Define RCCEx Private Define
+ * @{
+ */
+#define HSI48_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */
+
+/* Bit position in register */
+#define CRS_CFGR_FELIM_BITNUMBER 16
+#define CRS_CR_TRIM_BITNUMBER 8
+#define CRS_ISR_FECAP_BITNUMBER 16
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup RCCEx_Private_Variables RCCEx Private Variables
+ * @{
+ */
+const uint8_t PLLMULFactorTable[16] = { 2, 3, 4, 5, 6, 7, 8, 9,
+ 10, 11, 12, 13, 14, 15, 16, 16};
+const uint8_t PredivFactorTable[16] = { 1, 2, 3, 4, 5, 6, 7, 8,
+ 9,10, 11, 12, 13, 14, 15, 16};
+/**
+ * @}
+ */
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup RCCEx_Exported_Functions RCCEx Exported Functions
+ * @{
+ */
+
+/** @defgroup RCCEx_Exported_Functions_Group1 Extended Peripheral Control functions
+ * @brief Extended RCC clocks control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Extended Peripheral Control functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the RCC Clocks
+ frequencies.
+ [..]
+ (@) Important note: Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to
+ select the RTC clock source; in this case the Backup domain will be reset in
+ order to modify the RTC Clock source, as consequence RTC registers (including
+ the backup registers) and RCC_BDCR register are set to their reset values.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the RCC Oscillators according to the specified parameters in the
+ * RCC_OscInitTypeDef.
+ * @param RCC_OscInitStruct: pointer to an RCC_OscInitTypeDef structure that
+ * contains the configuration information for the RCC Oscillators.
+ * @note The PLL is not disabled when used as system clock.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
+{
+ uint32_t tickstart = 0;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType));
+ /*------------------------------- HSE Configuration ------------------------*/
+ if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState));
+ /* When the HSE is used as system clock or clock source for PLL in these cases it is not allowed to be disabled */
+ if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSE) ||
+ ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSE)))
+ {
+ if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) && (RCC_OscInitStruct->HSEState != RCC_HSE_ON))
+ {
+ return HAL_ERROR;
+ }
+ }
+ else
+ {
+ /* Reset HSEON and HSEBYP bits before configuring the HSE --------------*/
+ __HAL_RCC_HSE_CONFIG(RCC_HSE_OFF);
+
+ /* Get timeout */
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSE is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set the new HSE configuration ---------------------------------------*/
+ __HAL_RCC_HSE_CONFIG((uint8_t)RCC_OscInitStruct->HSEState);
+
+ /* Check the HSE State */
+ if(RCC_OscInitStruct->HSEState != RCC_HSE_OFF)
+ {
+ /* Get timeout */
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSE is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ /* Get timeout */
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSE is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ }
+ /*----------------------------- HSI Configuration --------------------------*/
+ if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState));
+ assert_param(IS_RCC_CALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue));
+
+ /* Check if HSI is used as system clock or as PLL source when PLL is selected as system clock */
+ if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSI) ||
+ ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSI)))
+ {
+ /* When the HSI is used as system clock it is not allowed to be disabled */
+ if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) && (RCC_OscInitStruct->HSIState != RCC_HSI_ON))
+ {
+ return HAL_ERROR;
+ }
+ /* Otherwise, just the calibration is allowed */
+ else
+ {
+ /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/
+ __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue);
+ }
+ }
+ else
+ {
+ /* Check the HSI State */
+ if(RCC_OscInitStruct->HSIState != RCC_HSI_OFF)
+ {
+ /* Enable the Internal High Speed oscillator (HSI). */
+ __HAL_RCC_HSI_ENABLE();
+
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSI is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Adjusts the Internal High Speed oscillator (HSI) calibration value. */
+ __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue);
+ }
+ else
+ {
+ /* Disable the Internal High Speed oscillator (HSI). */
+ __HAL_RCC_HSI_DISABLE();
+
+ /* Get timeout */
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSI is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ }
+ /*------------------------------ LSI Configuration -------------------------*/
+ if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState));
+
+ /* Check the LSI State */
+ if(RCC_OscInitStruct->LSIState != RCC_LSI_OFF)
+ {
+ /* Enable the Internal Low Speed oscillator (LSI). */
+ __HAL_RCC_LSI_ENABLE();
+
+ /* Get timeout */
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSI is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart) > LSI_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ /* Disable the Internal Low Speed oscillator (LSI). */
+ __HAL_RCC_LSI_DISABLE();
+
+ /* Get timeout */
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSI is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart) > LSI_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ /*------------------------------ LSE Configuration -------------------------*/
+ if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState));
+
+ /* Enable Power Clock */
+ __PWR_CLK_ENABLE();
+
+ /* Enable write access to Backup domain */
+ SET_BIT(PWR->CR, PWR_CR_DBP);
+
+ /* Wait for Backup domain Write protection disable */
+ tickstart = HAL_GetTick();
+
+ while((PWR->CR & PWR_CR_DBP) == RESET)
+ {
+ if((HAL_GetTick() - tickstart) > DBP_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Reset LSEON and LSEBYP bits before configuring the LSE ----------------*/
+ __HAL_RCC_LSE_CONFIG(RCC_LSE_OFF);
+
+ /* Get timeout */
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSE is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart) > LSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set the new LSE configuration -----------------------------------------*/
+ __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState);
+ /* Check the LSE State */
+ if(RCC_OscInitStruct->LSEState == RCC_LSE_ON)
+ {
+ /* Get timeout */
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSE is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart) > LSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ /* Get timeout */
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSE is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart) > LSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+
+ /*----------------------------- HSI14 Configuration --------------------------*/
+ if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI14) == RCC_OSCILLATORTYPE_HSI14)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_HSI14(RCC_OscInitStruct->HSI14State));
+ assert_param(IS_RCC_CALIBRATION_VALUE(RCC_OscInitStruct->HSI14CalibrationValue));
+
+ /* Check the HSI14 State */
+ if(RCC_OscInitStruct->HSI14State == RCC_HSI14_ON)
+ {
+ /* Disable ADC control of the Internal High Speed oscillator HSI14 */
+ __HAL_RCC_HSI14ADC_DISABLE();
+
+ /* Enable the Internal High Speed oscillator (HSI). */
+ __HAL_RCC_HSI14_ENABLE();
+
+ /* Get timeout */
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSI is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSI14RDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart) > HSI14_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Adjusts the Internal High Speed oscillator 14Mhz (HSI14) calibration value. */
+ __HAL_RCC_HSI14_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSI14CalibrationValue);
+ }
+ else if(RCC_OscInitStruct->HSI14State == RCC_HSI14_ADC_CONTROL)
+ {
+ /* Enable ADC control of the Internal High Speed oscillator HSI14 */
+ __HAL_RCC_HSI14ADC_ENABLE();
+
+ /* Adjusts the Internal High Speed oscillator 14Mhz (HSI14) calibration value. */
+ __HAL_RCC_HSI14_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSI14CalibrationValue);
+ }
+ else
+ {
+ /* Disable ADC control of the Internal High Speed oscillator HSI14 */
+ __HAL_RCC_HSI14ADC_DISABLE();
+
+ /* Disable the Internal High Speed oscillator (HSI). */
+ __HAL_RCC_HSI14_DISABLE();
+
+ /* Get timeout */
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSI is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSI14RDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart) > HSI14_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+ /*----------------------------- HSI48 Configuration --------------------------*/
+ if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI48) == RCC_OSCILLATORTYPE_HSI48)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_HSI48(RCC_OscInitStruct->HSI48State));
+
+ /* When the HSI48 is used as system clock it is not allowed to be disabled */
+ if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSI48) ||
+ ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSI48)))
+ {
+ if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSI48RDY) != RESET) && (RCC_OscInitStruct->HSI48State != RCC_HSI48_ON))
+ {
+ return HAL_ERROR;
+ }
+ }
+ else
+ {
+ /* Check the HSI State */
+ if(RCC_OscInitStruct->HSI48State != RCC_HSI48_OFF)
+ {
+ /* Enable the Internal High Speed oscillator (HSI48). */
+ __HAL_RCC_HSI48_ENABLE();
+
+ /* Get timeout */
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSI is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSI48RDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart) > HSI48_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ /* Disable the Internal High Speed oscillator (HSI48). */
+ __HAL_RCC_HSI48_DISABLE();
+
+ /* Get timeout */
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSI is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSI48RDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart) > HSI48_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ }
+#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+ /*-------------------------------- PLL Configuration -----------------------*/
+ /* Check the parameters */
+ assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState));
+ if ((RCC_OscInitStruct->PLL.PLLState) != RCC_PLL_NONE)
+ {
+ /* Check if the PLL is used as system clock or not */
+ if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_PLLCLK)
+ {
+ if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_ON)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource));
+ assert_param(IS_RCC_PREDIV(RCC_OscInitStruct->PLL.PREDIV));
+ assert_param(IS_RCC_PLL_MUL(RCC_OscInitStruct->PLL.PLLMUL));
+
+ /* Disable the main PLL. */
+ __HAL_RCC_PLL_DISABLE();
+
+ /* Get timeout */
+ tickstart = HAL_GetTick();
+
+ /* Wait till PLL is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Configure the main PLL clock source, predivider and multiplication factor. */
+ __HAL_RCC_PLL_CONFIG(RCC_OscInitStruct->PLL.PLLSource,
+ RCC_OscInitStruct->PLL.PREDIV,
+ RCC_OscInitStruct->PLL.PLLMUL);
+
+ /* Enable the main PLL. */
+ __HAL_RCC_PLL_ENABLE();
+
+ /* Get timeout */
+ tickstart = HAL_GetTick();
+
+ /* Wait till PLL is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ /* Disable the main PLL. */
+ __HAL_RCC_PLL_DISABLE();
+ /* Get timeout */
+ tickstart = HAL_GetTick();
+
+ /* Wait till PLL is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CPU, AHB and APB busses clocks according to the specified
+ * parameters in the RCC_ClkInitStruct.
+ * @param RCC_ClkInitStruct: pointer to an RCC_OscInitTypeDef structure that
+ * contains the configuration information for the RCC peripheral.
+ * @param FLatency: FLASH Latency
+ * This parameter can be one of the following values:
+ * @arg FLASH_LATENCY_0: FLASH 0 Latency cycle
+ * @arg FLASH_LATENCY_1: FLASH 1 Latency cycle
+ *
+ * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency
+ * and updated by HAL_RCC_GetHCLKFreq() function called within this function
+ *
+ * @note The HSI is used (enabled by hardware) as system clock source after
+ * startup from Reset, wake-up from STOP and STANDBY mode, or in case
+ * of failure of the HSE used directly or indirectly as system clock
+ * (if the Clock Security System CSS is enabled).
+ *
+ * @note A switch from one clock source to another occurs only if the target
+ * clock source is ready (clock stable after startup delay or PLL locked).
+ * If a clock source which is not yet ready is selected, the switch will
+ * occur when the clock source will be ready.
+ * @retval None
+ */
+HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency)
+{
+ uint32_t tickstart = 0;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_CLOCKTYPE(RCC_ClkInitStruct->ClockType));
+ assert_param(IS_FLASH_LATENCY(FLatency));
+
+ /* To correctly read data from FLASH memory, the number of wait states (LATENCY)
+ must be correctly programmed according to the frequency of the CPU clock
+ (HCLK) of the device. */
+
+ /* Increasing the CPU frequency */
+ if(FLatency > (FLASH->ACR & FLASH_ACR_LATENCY))
+ {
+ /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */
+ __HAL_FLASH_SET_LATENCY(FLatency);
+
+ /* Check that the new number of wait states is taken into account to access the Flash
+ memory by reading the FLASH_ACR register */
+ if((FLASH->ACR & FLASH_ACR_LATENCY) != FLatency)
+ {
+ return HAL_ERROR;
+ }
+
+ /*-------------------------- HCLK Configuration --------------------------*/
+ if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK)
+ {
+ assert_param(IS_RCC_SYSCLK_DIV(RCC_ClkInitStruct->AHBCLKDivider));
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider);
+ }
+
+ /*------------------------- SYSCLK Configuration ---------------------------*/
+ if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK)
+ {
+ assert_param(IS_RCC_SYSCLKSOURCE(RCC_ClkInitStruct->SYSCLKSource));
+
+ /* HSE is selected as System Clock Source */
+ if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE)
+ {
+ /* Check the HSE ready flag */
+ if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET)
+ {
+ return HAL_ERROR;
+ }
+ }
+ /* PLL is selected as System Clock Source */
+ else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK)
+ {
+ /* Check the PLL ready flag */
+ if(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
+ {
+ return HAL_ERROR;
+ }
+ }
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+ /* HSI48 is selected as System Clock Source */
+ else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSI48)
+ {
+ /* Check the HSI48 ready flag */
+ if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSI48RDY) == RESET)
+ {
+ return HAL_ERROR;
+ }
+ }
+#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+ /* HSI is selected as System Clock Source */
+ else
+ {
+ /* Check the HSI ready flag */
+ if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET)
+ {
+ return HAL_ERROR;
+ }
+ }
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, RCC_ClkInitStruct->SYSCLKSource);
+
+ /* Get timeout */
+ tickstart = HAL_GetTick();
+
+ if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE)
+ {
+ while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_HSE)
+ {
+ if((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK)
+ {
+ while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_PLLCLK)
+ {
+ if((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+ else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSI48)
+ {
+ while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_HSI48)
+ {
+ if((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+ else
+ {
+ while(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_HSI)
+ {
+ if((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ }
+ /* Decreasing the CPU frequency */
+ else
+ {
+ /*-------------------------- HCLK Configuration --------------------------*/
+ if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK)
+ {
+ assert_param(IS_RCC_SYSCLK_DIV(RCC_ClkInitStruct->AHBCLKDivider));
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider);
+ }
+
+ /*------------------------- SYSCLK Configuration ---------------------------*/
+ if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK)
+ {
+ assert_param(IS_RCC_SYSCLKSOURCE(RCC_ClkInitStruct->SYSCLKSource));
+
+ /* HSE is selected as System Clock Source */
+ if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE)
+ {
+ /* Check the HSE ready flag */
+ if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET)
+ {
+ return HAL_ERROR;
+ }
+ }
+ /* PLL is selected as System Clock Source */
+ else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK)
+ {
+ /* Check the PLL ready flag */
+ if(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
+ {
+ return HAL_ERROR;
+ }
+ }
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+ /* HSI48 is selected as System Clock Source */
+ else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSI48)
+ {
+ /* Check the HSI48 ready flag */
+ if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSI48RDY) == RESET)
+ {
+ return HAL_ERROR;
+ }
+ }
+#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+ /* HSI is selected as System Clock Source */
+ else
+ {
+ /* Check the HSI ready flag */
+ if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET)
+ {
+ return HAL_ERROR;
+ }
+ }
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, RCC_ClkInitStruct->SYSCLKSource);
+
+ /* Get timeout */
+ tickstart = HAL_GetTick();
+
+ if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE)
+ {
+ while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_HSE)
+ {
+ if((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK)
+ {
+ while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_PLLCLK)
+ {
+ if((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+ else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSI48)
+ {
+ while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_HSI48)
+ {
+ if((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+ else
+ {
+ while(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_HSI)
+ {
+ if((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+
+ /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */
+ __HAL_FLASH_SET_LATENCY(FLatency);
+
+ /* Check that the new number of wait states is taken into account to access the Flash
+ memory by reading the FLASH_ACR register */
+ if((FLASH->ACR & FLASH_ACR_LATENCY) != FLatency)
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ /*-------------------------- PCLK1 Configuration ---------------------------*/
+ if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1)
+ {
+ assert_param(IS_RCC_HCLK_DIV(RCC_ClkInitStruct->APB1CLKDivider));
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE, RCC_ClkInitStruct->APB1CLKDivider);
+ }
+
+ /* Configure the source of time base considering new system clocks settings*/
+ HAL_InitTick (TICK_INT_PRIORITY);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Returns the SYSCLK frequency
+ * @note The system frequency computed by this function is not the real
+ * frequency in the chip. It is calculated based on the predefined
+ * constant and the selected clock source:
+ * @note If SYSCLK source is HSI, function returns a value based on HSI_VALUE(*)
+ * @note If SYSCLK source is HSI48, function returns a value based on HSI48_VALUE(*)
+ * @note If SYSCLK source is HSE, function returns a value based on HSE_VALUE
+ * divided by PREDIV factor(**)
+ * @note If SYSCLK source is PLL, function returns a value based on HSE_VALUE
+ * divided by PREDIV factor(**) or depending on STM32F0xx devices either a value based
+ * on HSI_VALUE divided by 2 or HSI_VALUE divided by PREDIV factor(*) multiplied by the
+ * PLL factor .
+ * @note (*) HSI_VALUE & HSI48_VALUE are constants defined in stm32f0xx_hal_conf.h file
+ * (default values 8 MHz and 48MHz).
+ * @note (**) HSE_VALUE is a constant defined in stm32f0xx_hal_conf.h file (default value
+ * 8 MHz), user has to ensure that HSE_VALUE is same as the real
+ * frequency of the crystal used. Otherwise, this function may
+ * have wrong result.
+ *
+ * @note The result of this function could be not correct when using fractional
+ * value for HSE crystal.
+ *
+ * @note This function can be used by the user application to compute the
+ * baudrate for the communication peripherals or configure other parameters.
+ *
+ * @note Each time SYSCLK changes, this function must be called to update the
+ * right SYSCLK value. Otherwise, any configuration based on this function will be incorrect.
+ *
+ * @retval SYSCLK frequency
+ */
+uint32_t HAL_RCC_GetSysClockFreq(void)
+{
+ uint32_t tmpreg = 0, prediv = 0, pllmul = 0, pllclk = 0;
+ uint32_t sysclockfreq = 0;
+
+ tmpreg = RCC->CFGR;
+
+ /* Get SYSCLK source -------------------------------------------------------*/
+ switch (tmpreg & RCC_CFGR_SWS)
+ {
+ case RCC_SYSCLKSOURCE_STATUS_HSE: /* HSE used as system clock source */
+ sysclockfreq = HSE_VALUE;
+ break;
+
+ case RCC_SYSCLKSOURCE_STATUS_PLLCLK: /* PLL used as system clock source */
+ pllmul = PLLMULFactorTable[(uint32_t)(tmpreg & RCC_CFGR_PLLMUL) >> RCC_CFGR_PLLMUL_BITNUMBER];
+ prediv = PredivFactorTable[(uint32_t)(RCC->CFGR2 & RCC_CFGR2_PREDIV) >> RCC_CFGR2_PREDIV_BITNUMBER];
+ if ((tmpreg & RCC_CFGR_PLLSRC) == RCC_PLLSOURCE_HSE)
+ {
+ /* HSE used as PLL clock source : PLLCLK = HSE/PREDIV * PLLMUL */
+ pllclk = (HSE_VALUE/prediv) * pllmul;
+ }
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+ else if ((tmpreg & RCC_CFGR_PLLSRC) == RCC_PLLSOURCE_HSI48)
+ {
+ /* HSI48 used as PLL clock source : PLLCLK = HSI48/PREDIV * PLLMUL */
+ pllclk = (HSI48_VALUE/prediv) * pllmul;
+ }
+#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+ else
+ {
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+ /* HSI used as PLL clock source : PLLCLK = HSI/PREDIV * PLLMUL */
+ pllclk = (HSI_VALUE/prediv) * pllmul;
+#else
+ /* HSI used as PLL clock source : PLLCLK = HSI/2 * PLLMUL */
+ pllclk = (HSI_VALUE >> 1) * pllmul;
+#endif /* STM32F042x6 || STM32F048xx || STM32F070x6 ||
+ STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB
+ STM32F091xC || STM32F098xx || STM32F030xC */
+ }
+ sysclockfreq = pllclk;
+ break;
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+ case RCC_SYSCLKSOURCE_STATUS_HSI48: /* HSI48 used as system clock source */
+ sysclockfreq = HSI48_VALUE;
+ break;
+#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+ case RCC_SYSCLKSOURCE_STATUS_HSI: /* HSI used as system clock source */
+ default:
+ sysclockfreq = HSI_VALUE;
+ break;
+ }
+ return sysclockfreq;
+}
+
+/**
+ * @brief Initializes the RCC extended peripherals clocks according to the specified
+ * parameters in the RCC_PeriphCLKInitTypeDef.
+ * @param PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that
+ * contains the configuration information for the Extended Peripherals clocks
+ * (USART, RTC, I2C, CEC and USB).
+ *
+ * @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select
+ * the RTC clock source; in this case the Backup domain will be reset in
+ * order to modify the RTC Clock source, as consequence RTC registers (including
+ * the backup registers) and RCC_BDCR register are set to their reset values.
+ *
+ * @retval None
+ */
+HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
+{
+ uint32_t tickstart = 0;
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_PERIPHCLK(PeriphClkInit->PeriphClockSelection));
+
+ /*---------------------------- RTC configuration -------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC))
+ {
+ /* Enable Power Clock*/
+ __PWR_CLK_ENABLE();
+
+ /* Enable write access to Backup domain */
+ SET_BIT(PWR->CR, PWR_CR_DBP);
+
+ /* Wait for Backup domain Write protection disable */
+ tickstart = HAL_GetTick();
+
+ while((PWR->CR & PWR_CR_DBP) == RESET)
+ {
+ if((HAL_GetTick() - tickstart) > DBP_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Reset the Backup domain only if the RTC Clock source selction is modified */
+ if((RCC->BDCR & RCC_BDCR_RTCSEL) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL))
+ {
+ /* Store the content of BDCR register before the reset of Backup Domain */
+ tmpreg = (RCC->BDCR & ~(RCC_BDCR_RTCSEL));
+ /* RTC Clock selection can be changed only if the Backup Domain is reset */
+ __HAL_RCC_BACKUPRESET_FORCE();
+ __HAL_RCC_BACKUPRESET_RELEASE();
+ /* Restore the Content of BDCR register */
+ RCC->BDCR = tmpreg;
+ }
+
+ /* If LSE is selected as RTC clock source, wait for LSE reactivation */
+ if(PeriphClkInit->RTCClockSelection == RCC_RTCCLKSOURCE_LSE)
+ {
+ /* Get timeout */
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSE is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart) > LSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection);
+ }
+
+ /*------------------------------- USART1 Configuration ------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_USART1CLKSOURCE(PeriphClkInit->Usart1ClockSelection));
+
+ /* Configure the USART1 clock source */
+ __HAL_RCC_USART1_CONFIG(PeriphClkInit->Usart1ClockSelection);
+ }
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+ /*----------------------------- USART2 Configuration --------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_USART2CLKSOURCE(PeriphClkInit->Usart2ClockSelection));
+
+ /* Configure the USART2 clock source */
+ __HAL_RCC_USART2_CONFIG(PeriphClkInit->Usart2ClockSelection);
+ }
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+ /*----------------------------- USART3 Configuration --------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_USART3CLKSOURCE(PeriphClkInit->Usart3ClockSelection));
+
+ /* Configure the USART3 clock source */
+ __HAL_RCC_USART3_CONFIG(PeriphClkInit->Usart3ClockSelection);
+ }
+#endif /* STM32F091xC || STM32F098xx */
+
+ /*------------------------------ I2C1 Configuration ------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_I2C1CLKSOURCE(PeriphClkInit->I2c1ClockSelection));
+
+ /* Configure the I2C1 clock source */
+ __HAL_RCC_I2C1_CONFIG(PeriphClkInit->I2c1ClockSelection);
+ }
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || defined(STM32F070x6)
+ /*------------------------------ USB Configuration ------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_USBCLKSOURCE(PeriphClkInit->UsbClockSelection));
+
+ /* Configure the USB clock source */
+ __HAL_RCC_USB_CONFIG(PeriphClkInit->UsbClockSelection);
+ }
+#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || STM32F078xx || STM32F070xB || STM32F070x6 */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+ /*------------------------------ CEC clock Configuration -------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_CECCLKSOURCE(PeriphClkInit->CecClockSelection));
+
+ /* Configure the CEC clock source */
+ __HAL_RCC_CEC_CONFIG(PeriphClkInit->CecClockSelection);
+ }
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Get the RCC_ClkInitStruct according to the internal
+ * RCC configuration registers.
+ * @param PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that
+ * returns the configuration information for the Extended Peripherals clocks
+ * (USART, RTC, I2C, CEC and USB).
+ * @retval None
+ */
+void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
+{
+ /* Set all possible values for the extended clock type parameter------------*/
+ /* Common part first */
+ PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_RTC;
+ /* Get the RTC configuration --------------------------------------------*/
+ PeriphClkInit->RTCClockSelection = __HAL_RCC_GET_RTC_SOURCE();
+ /* Get the USART1 configuration --------------------------------------------*/
+ PeriphClkInit->Usart1ClockSelection = __HAL_RCC_GET_USART1_SOURCE();
+ /* Get the I2C1 clock source -----------------------------------------------*/
+ PeriphClkInit->I2c1ClockSelection = __HAL_RCC_GET_I2C1_SOURCE();
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+ PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_USART2;
+ /* Get the USART2 clock source ---------------------------------------------*/
+ PeriphClkInit->Usart2ClockSelection = __HAL_RCC_GET_USART2_SOURCE();
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+ PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_USART3;
+ /* Get the USART3 clock source ---------------------------------------------*/
+ PeriphClkInit->Usart3ClockSelection = __HAL_RCC_GET_USART3_SOURCE();
+#endif /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || defined(STM32F070x6)
+ PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_USB;
+ /* Get the USB clock source ---------------------------------------------*/
+ PeriphClkInit->UsbClockSelection = __HAL_RCC_GET_USB_SOURCE();
+#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || STM32F078xx || STM32F070xB || STM32F070x6 */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+ PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_CEC;
+ /* Get the CEC clock source ------------------------------------------------*/
+ PeriphClkInit->CecClockSelection = __HAL_RCC_GET_CEC_SOURCE();
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+}
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+/**
+ * @brief Start automatic synchronization using polling mode
+ * @param pInit Pointer on RCC_CRSInitTypeDef structure
+ * @retval None
+ */
+void HAL_RCCEx_CRSConfig(RCC_CRSInitTypeDef *pInit)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_CRS_SYNC_DIV(pInit->Prescaler));
+ assert_param(IS_RCC_CRS_SYNC_SOURCE(pInit->Source));
+ assert_param(IS_RCC_CRS_SYNC_POLARITY(pInit->Polarity));
+ assert_param(IS_RCC_CRS_RELOADVALUE(pInit->ReloadValue));
+ assert_param(IS_RCC_CRS_ERRORLIMIT(pInit->ErrorLimitValue));
+ assert_param(IS_RCC_CRS_HSI48CALIBRATION(pInit->HSI48CalibrationValue));
+
+
+ /* CONFIGURATION */
+
+ /* Before configuration, reset CRS registers to their default values*/
+ __CRS_FORCE_RESET();
+ __CRS_RELEASE_RESET();
+
+ /* Configure Synchronization input */
+ /* Clear SYNCDIV[2:0], SYNCSRC[1:0] & SYNCSPOL bits */
+ CRS->CFGR &= ~(CRS_CFGR_SYNCDIV | CRS_CFGR_SYNCSRC | CRS_CFGR_SYNCPOL);
+
+ /* Set the CRS_CFGR_SYNCDIV[2:0] bits according to Prescaler value */
+ CRS->CFGR |= pInit->Prescaler;
+
+ /* Set the SYNCSRC[1:0] bits according to Source value */
+ CRS->CFGR |= pInit->Source;
+
+ /* Set the SYNCSPOL bits according to Polarity value */
+ CRS->CFGR |= pInit->Polarity;
+
+ /* Configure Frequency Error Measurement */
+ /* Clear RELOAD[15:0] & FELIM[7:0] bits*/
+ CRS->CFGR &= ~(CRS_CFGR_RELOAD | CRS_CFGR_FELIM);
+
+ /* Set the RELOAD[15:0] bits according to ReloadValue value */
+ CRS->CFGR |= pInit->ReloadValue;
+
+ /* Set the FELIM[7:0] bits according to ErrorLimitValue value */
+ CRS->CFGR |= (pInit->ErrorLimitValue << CRS_CFGR_FELIM_BITNUMBER);
+
+ /* Adjust HSI48 oscillator smooth trimming */
+ /* Clear TRIM[5:0] bits */
+ CRS->CR &= ~CRS_CR_TRIM;
+
+ /* Set the TRIM[5:0] bits according to RCC_CRS_HSI48CalibrationValue value */
+ CRS->CR |= (pInit->HSI48CalibrationValue << CRS_CR_TRIM_BITNUMBER);
+
+
+ /* START AUTOMATIC SYNCHRONIZATION*/
+
+ /* Enable Automatic trimming */
+ __HAL_RCC_CRS_ENABLE_AUTOMATIC_CALIB();
+
+ /* Enable Frequency error counter */
+ __HAL_RCC_CRS_ENABLE_FREQ_ERROR_COUNTER();
+
+}
+
+/**
+ * @brief Generate the software synchronization event
+ * @retval None
+ */
+void HAL_RCCEx_CRSSoftwareSynchronizationGenerate(void)
+{
+ CRS->CR |= CRS_CR_SWSYNC;
+}
+
+
+/**
+ * @brief Function to return synchronization info
+ * @param pSynchroInfo Pointer on RCC_CRSSynchroInfoTypeDef structure
+ * @retval None
+ */
+void HAL_RCCEx_CRSGetSynchronizationInfo(RCC_CRSSynchroInfoTypeDef *pSynchroInfo)
+{
+ /* Check the parameter */
+ assert_param(pSynchroInfo != NULL);
+
+ /* Get the reload value */
+ pSynchroInfo->ReloadValue = (uint32_t)(CRS->CFGR & CRS_CFGR_RELOAD);
+
+ /* Get HSI48 oscillator smooth trimming */
+ pSynchroInfo->HSI48CalibrationValue = (uint32_t)((CRS->CR & CRS_CR_TRIM) >> CRS_CR_TRIM_BITNUMBER);
+
+ /* Get Frequency error capture */
+ pSynchroInfo->FreqErrorCapture = (uint32_t)((CRS->ISR & CRS_ISR_FECAP) >> CRS_ISR_FECAP_BITNUMBER);
+
+ /* Get FFrequency error direction */
+ pSynchroInfo->FreqErrorDirection = (uint32_t)(CRS->ISR & CRS_ISR_FEDIR);
+
+
+}
+
+/**
+* @brief This function handles CRS Synchronization Timeout.
+* @param Timeout: Duration of the timeout
+* @note Timeout is based on the maximum time to receive a SYNC event based on synchronization
+* frequency.
+* @note If Timeout set to HAL_MAX_DELAY, HAL_TIMEOUT will be never returned.
+* @retval Combination of Synchronization status
+* This parameter can be a combination of the following values:
+* @arg RCC_CRS_TIMEOUT
+* @arg RCC_CRS_SYNCOK
+* @arg RCC_CRS_SYNCWARM
+* @arg RCC_CRS_SYNCERR
+* @arg RCC_CRS_SYNCMISS
+* @arg RCC_CRS_TRIMOV
+*/
+uint32_t HAL_RCCEx_CRSWaitSynchronization(uint32_t Timeout)
+{
+ uint32_t crsstatus = RCC_CRS_NONE;
+ uint32_t tickstart = 0;
+
+ /* Get timeout */
+ tickstart = HAL_GetTick();
+
+ /* Check that if one of CRS flags have been set */
+ while(RCC_CRS_NONE == crsstatus)
+ {
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0) || ((HAL_GetTick() - tickstart) > Timeout))
+ {
+ crsstatus = RCC_CRS_TIMEOUT;
+ }
+ }
+ /* Check CRS SYNCOK flag */
+ if(__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCOK))
+ {
+ /* CRS SYNC event OK */
+ crsstatus |= RCC_CRS_SYNCOK;
+
+ /* Clear CRS SYNC event OK bit */
+ __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCOK);
+ }
+
+ /* Check CRS SYNCWARN flag */
+ if(__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCWARN))
+ {
+ /* CRS SYNC warning */
+ crsstatus |= RCC_CRS_SYNCWARM;
+
+ /* Clear CRS SYNCWARN bit */
+ __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCWARN);
+ }
+
+ /* Check CRS TRIM overflow flag */
+ if(__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_TRIMOVF))
+ {
+ /* CRS SYNC Error */
+ crsstatus |= RCC_CRS_TRIMOV;
+
+ /* Clear CRS Error bit */
+ __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_TRIMOVF);
+ }
+
+ /* Check CRS Error flag */
+ if(__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCERR))
+ {
+ /* CRS SYNC Error */
+ crsstatus |= RCC_CRS_SYNCERR;
+
+ /* Clear CRS Error bit */
+ __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCERR);
+ }
+
+ /* Check CRS SYNC Missed flag */
+ if(__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCMISS))
+ {
+ /* CRS SYNC Missed */
+ crsstatus |= RCC_CRS_SYNCMISS;
+
+ /* Clear CRS SYNC Missed bit */
+ __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCMISS);
+ }
+
+ /* Check CRS Expected SYNC flag */
+ if(__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_ESYNC))
+ {
+ /* frequency error counter reached a zero value */
+ __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_ESYNC);
+ }
+ }
+
+ return crsstatus;
+}
+
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_RCC_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/src/stm32f0xx_hal_rtc.c b/f0/src/stm32f0xx_hal_rtc.c
new file mode 100755
index 0000000000000000000000000000000000000000..71cd5f5f3e37881445dbe395f24aca0c89455ed1
--- /dev/null
+++ b/f0/src/stm32f0xx_hal_rtc.c
@@ -0,0 +1,1385 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_rtc.c
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief RTC HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Real-Time Clock (RTC) peripheral:
+ * + Initialization
+ * + RTC Time and Date functions
+ * + RTC Alarm functions
+ * + Backup Data Registers configuration
+ * + Interrupts and flags management
+ *
+ @verbatim
+
+ ===============================================================================
+ ##### RTC Operating Condition #####
+ ===============================================================================
+ [..] The real-time clock (RTC) and the RTC backup registers can be powered
+ from the VBAT voltage when the main VDD supply is powered off.
+ To retain the content of the RTC backup registers and supply the RTC
+ when VDD is turned off, VBAT pin can be connected to an optional
+ standby voltage supplied by a battery or by another source.
+
+ [..] To allow the RTC to operate even when the main digital supply (VDD)
+ is turned off, the VBAT pin powers the following blocks:
+ (#) The RTC
+ (#) The LSE oscillator
+ (#) PC13 to PC15 I/Os (when available)
+
+ [..] When the backup domain is supplied by VDD (analog switch connected
+ to VDD), the following pins are available:
+ (#) PC14 and PC15 can be used as either GPIO or LSE pins
+ (#) PC13 can be used as a GPIO or as the RTC_OUT pin
+
+ [..] When the backup domain is supplied by VBAT (analog switch connected
+ to VBAT because VDD is not present), the following pins are available:
+ (#) PC14 and PC15 can be used as LSE pins only
+ (#) PC13 can be used as the RTC_OUT pin
+
+ ##### Backup Domain Reset #####
+ ===============================================================================
+ [..] The backup domain reset sets all RTC registers and the RCC_BDCR
+ register to their reset values.
+ A backup domain reset is generated when one of the following events
+ occurs:
+ (#) Software reset, triggered by setting the BDRST bit in the
+ RCC Backup domain control register (RCC_BDCR).
+ (#) VDD or VBAT power on, if both supplies have previously been powered off.
+
+ ##### Backup Domain Access #####
+ ===================================================================
+ [..] After reset, the backup domain (RTC registers, RTC backup data
+ registers and backup SRAM) is protected against possible unwanted write
+ accesses.
+ [..] To enable access to the RTC Domain and RTC registers, proceed as follows:
+ (#) Enable the Power Controller (PWR) APB1 interface clock using the
+ __PWR_CLK_ENABLE() function.
+ (#) Enable access to RTC domain using the HAL_PWR_EnableBkUpAccess() function.
+ (#) Select the RTC clock source using the __HAL_RCC_RTC_CONFIG() function.
+ (#) Enable RTC Clock using the __HAL_RCC_RTC_ENABLE() function.
+
+
+ ##### How to use this driver #####
+ ===================================================================
+ [..]
+ (+) Enable the RTC domain access (see description in the section above).
+ (+) Configure the RTC Prescaler (Asynchronous and Synchronous) and RTC hour
+ format using the HAL_RTC_Init() function.
+
+ *** Time and Date configuration ***
+ ===================================
+ [..]
+ (+) To configure the RTC Calendar (Time and Date) use the HAL_RTC_SetTime()
+ and HAL_RTC_SetDate() functions.
+ (+) To read the RTC Calendar, use the HAL_RTC_GetTime() and HAL_RTC_GetDate() functions.
+
+ *** Alarm configuration ***
+ ===========================
+ [..]
+ (+) To configure the RTC Alarm use the HAL_RTC_SetAlarm() function.
+ You can also configure the RTC Alarm with interrupt mode using the HAL_RTC_SetAlarm_IT() function.
+ (+) To read the RTC Alarm, use the HAL_RTC_GetAlarm() function.
+
+ ##### RTC and low power modes #####
+ ===================================================================
+ [..] The MCU can be woken up from a low power mode by an RTC alternate
+ function.
+ [..] The RTC alternate functions are the RTC alarm (Alarm A),
+ RTC wake-up, RTC tamper event detection and RTC time stamp event detection.
+ These RTC alternate functions can wake up the system from the Stop and
+ Standby low power modes.
+ [..] The system can also wake up from low power modes without depending
+ on an external interrupt (Auto-wake-up mode), by using the RTC alarm
+ or the RTC wake-up events.
+ [..] The RTC provides a programmable time base for waking up from the
+ Stop or Standby mode at regular intervals.
+ Wake-up from STOP and STANDBY modes is possible only when the RTC clock source
+ is LSE or LSI.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup RTC RTC HAL module driver
+ * @brief RTC HAL module driver
+ * @{
+ */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup RTC_Exported_Functions RTC Exported Functions
+ * @{
+ */
+
+/** @defgroup RTC_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to initialize and configure the
+ RTC Prescaler (Synchronous and Asynchronous), RTC Hour format, disable
+ RTC registers Write protection, enter and exit the RTC initialization mode,
+ RTC registers synchronization check and reference clock detection enable.
+ (#) The RTC Prescaler is programmed to generate the RTC 1Hz time base.
+ It is split into 2 programmable prescalers to minimize power consumption.
+ (++) A 7-bit asynchronous prescaler and a 15-bit synchronous prescaler.
+ (++) When both prescalers are used, it is recommended to configure the
+ asynchronous prescaler to a high value to minimize power consumption.
+ (#) All RTC registers are Write protected. Writing to the RTC registers
+ is enabled by writing a key into the Write Protection register, RTC_WPR.
+ (#) To configure the RTC Calendar, user application should enter
+ initialization mode. In this mode, the calendar counter is stopped
+ and its value can be updated. When the initialization sequence is
+ complete, the calendar restarts counting after 4 RTCCLK cycles.
+ (#) To read the calendar through the shadow registers after Calendar
+ initialization, calendar update or after wake-up from low power modes
+ the software must first clear the RSF flag. The software must then
+ wait until it is set again before reading the calendar, which means
+ that the calendar registers have been correctly copied into the
+ RTC_TR and RTC_DR shadow registers.The HAL_RTC_WaitForSynchro() function
+ implements the above software sequence (RSF clear and RSF check).
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the RTC peripheral
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc)
+{
+ /* Check the RTC peripheral state */
+ if(hrtc == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_RTC_ALL_INSTANCE(hrtc->Instance));
+ assert_param(IS_RTC_HOUR_FORMAT(hrtc->Init.HourFormat));
+ assert_param(IS_RTC_ASYNCH_PREDIV(hrtc->Init.AsynchPrediv));
+ assert_param(IS_RTC_SYNCH_PREDIV(hrtc->Init.SynchPrediv));
+ assert_param(IS_RTC_OUTPUT(hrtc->Init.OutPut));
+ assert_param(IS_RTC_OUTPUT_POL(hrtc->Init.OutPutPolarity));
+ assert_param(IS_RTC_OUTPUT_TYPE(hrtc->Init.OutPutType));
+
+ if(hrtc->State == HAL_RTC_STATE_RESET)
+ {
+ /* Initialize RTC MSP */
+ HAL_RTC_MspInit(hrtc);
+ }
+
+ /* Set RTC state */
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Set Initialization mode */
+ if(RTC_EnterInitMode(hrtc) != HAL_OK)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Set RTC state */
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Clear RTC_CR FMT, OSEL and POL Bits */
+ hrtc->Instance->CR &= ((uint32_t)~(RTC_CR_FMT | RTC_CR_OSEL | RTC_CR_POL));
+ /* Set RTC_CR register */
+ hrtc->Instance->CR |= (uint32_t)(hrtc->Init.HourFormat | hrtc->Init.OutPut | hrtc->Init.OutPutPolarity);
+
+ /* Configure the RTC PRER */
+ hrtc->Instance->PRER = (uint32_t)(hrtc->Init.SynchPrediv);
+ hrtc->Instance->PRER |= (uint32_t)(hrtc->Init.AsynchPrediv << 16);
+
+ /* Exit Initialization mode */
+ hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT;
+
+ hrtc->Instance->TAFCR &= (uint32_t)~RTC_TAFCR_ALARMOUTTYPE;
+ hrtc->Instance->TAFCR |= (uint32_t)(hrtc->Init.OutPutType);
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Set RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ return HAL_OK;
+ }
+}
+
+/**
+ * @brief DeInitializes the RTC peripheral
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @note This function doesn't reset the RTC Backup Data registers.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc)
+{
+ /* Check the parameters */
+ assert_param(IS_RTC_ALL_INSTANCE(hrtc->Instance));
+
+ /* Set RTC state */
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Set Initialization mode */
+ if(RTC_EnterInitMode(hrtc) != HAL_OK)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Set RTC state */
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Reset TR, DR and CR registers */
+ hrtc->Instance->TR = (uint32_t)0x00000000;
+ hrtc->Instance->DR = (uint32_t)0x00002101;
+ /* Reset all RTC CR register bits */
+ hrtc->Instance->CR &= (uint32_t)0x00000000;
+ hrtc->Instance->PRER = (uint32_t)0x007F00FF;
+ hrtc->Instance->ALRMAR = (uint32_t)0x00000000;
+ hrtc->Instance->SHIFTR = (uint32_t)0x00000000;
+ hrtc->Instance->CALR = (uint32_t)0x00000000;
+ hrtc->Instance->ALRMASSR = (uint32_t)0x00000000;
+
+ /* Reset ISR register and exit initialization mode */
+ hrtc->Instance->ISR = (uint32_t)0x00000000;
+
+ /* Reset Tamper and alternate functions configuration register */
+ hrtc->Instance->TAFCR = 0x00000000;
+
+ /* If RTC_CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */
+ if((hrtc->Instance->CR & RTC_CR_BYPSHAD) == RESET)
+ {
+ if(HAL_RTC_WaitForSynchro(hrtc) != HAL_OK)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ return HAL_ERROR;
+ }
+ }
+ }
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* De-Initialize RTC MSP */
+ HAL_RTC_MspDeInit(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the RTC MSP.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval None
+ */
+__weak void HAL_RTC_MspInit(RTC_HandleTypeDef* hrtc)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_RTC_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes the RTC MSP.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval None
+ */
+__weak void HAL_RTC_MspDeInit(RTC_HandleTypeDef* hrtc)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_RTC_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Exported_Functions_Group2 RTC Time and Date functions
+ * @brief RTC Time and Date functions
+ *
+@verbatim
+ ===============================================================================
+ ##### RTC Time and Date functions #####
+ ===============================================================================
+
+ [..] This section provide functions allowing to configure Time and Date features
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Sets RTC current time.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param sTime: Pointer to Time structure
+ * @param Format: Specifies the format of the entered parameters.
+ * This parameter can be one of the following values:
+ * @arg FORMAT_BIN: Binary data format
+ * @arg FORMAT_BCD: BCD data format
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_SetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_FORMAT(Format));
+ assert_param(IS_RTC_DAYLIGHT_SAVING(sTime->DayLightSaving));
+ assert_param(IS_RTC_STORE_OPERATION(sTime->StoreOperation));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ if(Format == FORMAT_BIN)
+ {
+ if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET)
+ {
+ assert_param(IS_RTC_HOUR12(sTime->Hours));
+ assert_param(IS_RTC_HOURFORMAT12(sTime->TimeFormat));
+ }
+ else
+ {
+ sTime->TimeFormat = 0x00;
+ assert_param(IS_RTC_HOUR24(sTime->Hours));
+ }
+ assert_param(IS_RTC_MINUTES(sTime->Minutes));
+ assert_param(IS_RTC_SECONDS(sTime->Seconds));
+
+ tmpreg = (uint32_t)(((uint32_t)RTC_ByteToBcd2(sTime->Hours) << 16) | \
+ ((uint32_t)RTC_ByteToBcd2(sTime->Minutes) << 8) | \
+ ((uint32_t)RTC_ByteToBcd2(sTime->Seconds)) | \
+ (((uint32_t)sTime->TimeFormat) << 16));
+ }
+ else
+ {
+ if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET)
+ {
+ tmpreg = RTC_Bcd2ToByte(sTime->Hours);
+ assert_param(IS_RTC_HOUR12(tmpreg));
+ assert_param(IS_RTC_HOURFORMAT12(sTime->TimeFormat));
+ }
+ else
+ {
+ sTime->TimeFormat = 0x00;
+ assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sTime->Hours)));
+ }
+ assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sTime->Minutes)));
+ assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sTime->Seconds)));
+ tmpreg = (((uint32_t)(sTime->Hours) << 16) | \
+ ((uint32_t)(sTime->Minutes) << 8) | \
+ ((uint32_t)sTime->Seconds) | \
+ ((uint32_t)(sTime->TimeFormat) << 16));
+ }
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Set Initialization mode */
+ if(RTC_EnterInitMode(hrtc) != HAL_OK)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Set RTC state */
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Set the RTC_TR register */
+ hrtc->Instance->TR = (uint32_t)(tmpreg & RTC_TR_RESERVED_MASK);
+
+ /* Clear the bits to be configured */
+ hrtc->Instance->CR &= (uint32_t)~RTC_CR_BCK;
+
+ /* Configure the RTC_CR register */
+ hrtc->Instance->CR |= (uint32_t)(sTime->DayLightSaving | sTime->StoreOperation);
+
+ /* Exit Initialization mode */
+ hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT;
+
+ /* If CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */
+ if((hrtc->Instance->CR & RTC_CR_BYPSHAD) == RESET)
+ {
+ if(HAL_RTC_WaitForSynchro(hrtc) != HAL_OK)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_ERROR;
+ }
+ }
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+ }
+}
+
+/**
+ * @brief Gets RTC current time.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param sTime: Pointer to Time structure
+ * @param Format: Specifies the format of the entered parameters.
+ * This parameter can be one of the following values:
+ * @arg FORMAT_BIN: Binary data format
+ * @arg FORMAT_BCD: BCD data format
+ * @note You must call HAL_RTC_GetDate() after HAL_RTC_GetTime() to unlock the values
+ * in the higher-order calendar shadow registers to ensure consistency between the time and date values.
+ * Reading RTC current time locks the values in calendar shadow registers until Current date is read.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_GetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_FORMAT(Format));
+
+ /* Get subseconds values from the correspondent registers*/
+ sTime->SubSeconds = (uint32_t)(hrtc->Instance->SSR);
+
+ /* Get the TR register */
+ tmpreg = (uint32_t)(hrtc->Instance->TR & RTC_TR_RESERVED_MASK);
+
+ /* Fill the structure fields with the read parameters */
+ sTime->Hours = (uint8_t)((tmpreg & (RTC_TR_HT | RTC_TR_HU)) >> 16);
+ sTime->Minutes = (uint8_t)((tmpreg & (RTC_TR_MNT | RTC_TR_MNU)) >>8);
+ sTime->Seconds = (uint8_t)(tmpreg & (RTC_TR_ST | RTC_TR_SU));
+ sTime->TimeFormat = (uint8_t)((tmpreg & (RTC_TR_PM)) >> 16);
+
+ /* Check the input parameters format */
+ if(Format == FORMAT_BIN)
+ {
+ /* Convert the time structure parameters to Binary format */
+ sTime->Hours = (uint8_t)RTC_Bcd2ToByte(sTime->Hours);
+ sTime->Minutes = (uint8_t)RTC_Bcd2ToByte(sTime->Minutes);
+ sTime->Seconds = (uint8_t)RTC_Bcd2ToByte(sTime->Seconds);
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Sets RTC current date.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param sDate: Pointer to date structure
+ * @param Format: specifies the format of the entered parameters.
+ * This parameter can be one of the following values:
+ * @arg FORMAT_BIN: Binary data format
+ * @arg FORMAT_BCD: BCD data format
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format)
+{
+ uint32_t datetmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_FORMAT(Format));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ if((Format == FORMAT_BIN) && ((sDate->Month & 0x10) == 0x10))
+ {
+ sDate->Month = (uint8_t)((sDate->Month & (uint8_t)~(0x10)) + (uint8_t)0x0A);
+ }
+
+ assert_param(IS_RTC_WEEKDAY(sDate->WeekDay));
+
+ if(Format == FORMAT_BIN)
+ {
+ assert_param(IS_RTC_YEAR(sDate->Year));
+ assert_param(IS_RTC_MONTH(sDate->Month));
+ assert_param(IS_RTC_DATE(sDate->Date));
+
+ datetmpreg = (((uint32_t)RTC_ByteToBcd2(sDate->Year) << 16) | \
+ ((uint32_t)RTC_ByteToBcd2(sDate->Month) << 8) | \
+ ((uint32_t)RTC_ByteToBcd2(sDate->Date)) | \
+ ((uint32_t)sDate->WeekDay << 13));
+ }
+ else
+ {
+ assert_param(IS_RTC_YEAR(RTC_Bcd2ToByte(sDate->Year)));
+ datetmpreg = RTC_Bcd2ToByte(sDate->Month);
+ assert_param(IS_RTC_MONTH(datetmpreg));
+ datetmpreg = RTC_Bcd2ToByte(sDate->Date);
+ assert_param(IS_RTC_DATE(datetmpreg));
+
+ datetmpreg = ((((uint32_t)sDate->Year) << 16) | \
+ (((uint32_t)sDate->Month) << 8) | \
+ ((uint32_t)sDate->Date) | \
+ (((uint32_t)sDate->WeekDay) << 13));
+ }
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Set Initialization mode */
+ if(RTC_EnterInitMode(hrtc) != HAL_OK)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Set RTC state*/
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Set the RTC_DR register */
+ hrtc->Instance->DR = (uint32_t)(datetmpreg & RTC_DR_RESERVED_MASK);
+
+ /* Exit Initialization mode */
+ hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT;
+
+ /* If CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */
+ if((hrtc->Instance->CR & RTC_CR_BYPSHAD) == RESET)
+ {
+ if(HAL_RTC_WaitForSynchro(hrtc) != HAL_OK)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_ERROR;
+ }
+ }
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_READY ;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+ }
+}
+
+/**
+ * @brief Gets RTC current date.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param sDate: Pointer to Date structure
+ * @param Format: Specifies the format of the entered parameters.
+ * This parameter can be one of the following values:
+ * @arg FORMAT_BIN : Binary data format
+ * @arg FORMAT_BCD : BCD data format
+ * @note You must call HAL_RTC_GetDate() after HAL_RTC_GetTime() to unlock the values
+ * in the higher-order calendar shadow registers to ensure consistency between the time and date values.
+ * Reading RTC current time locks the values in calendar shadow registers until Current date is read.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_GetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format)
+{
+ uint32_t datetmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_FORMAT(Format));
+
+ /* Get the DR register */
+ datetmpreg = (uint32_t)(hrtc->Instance->DR & RTC_DR_RESERVED_MASK);
+
+ /* Fill the structure fields with the read parameters */
+ sDate->Year = (uint8_t)((datetmpreg & (RTC_DR_YT | RTC_DR_YU)) >> 16);
+ sDate->Month = (uint8_t)((datetmpreg & (RTC_DR_MT | RTC_DR_MU)) >> 8);
+ sDate->Date = (uint8_t)(datetmpreg & (RTC_DR_DT | RTC_DR_DU));
+ sDate->WeekDay = (uint8_t)((datetmpreg & (RTC_DR_WDU)) >> 13);
+
+ /* Check the input parameters format */
+ if(Format == FORMAT_BIN)
+ {
+ /* Convert the date structure parameters to Binary format */
+ sDate->Year = (uint8_t)RTC_Bcd2ToByte(sDate->Year);
+ sDate->Month = (uint8_t)RTC_Bcd2ToByte(sDate->Month);
+ sDate->Date = (uint8_t)RTC_Bcd2ToByte(sDate->Date);
+ }
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Exported_Functions_Group3 RTC Alarm functions
+ * @brief RTC Alarm functions
+ *
+@verbatim
+ ===============================================================================
+ ##### RTC Alarm functions #####
+ ===============================================================================
+
+ [..] This section provides functions allowing to configure Alarm feature
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Sets the specified RTC Alarm.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param sAlarm: Pointer to Alarm structure
+ * @param Format: Specifies the format of the entered parameters.
+ * This parameter can be one of the following values:
+ * @arg FORMAT_BIN: Binary data format
+ * @arg FORMAT_BCD: BCD data format
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_SetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format)
+{
+ uint32_t tickstart = 0;
+ uint32_t tmpreg = 0, subsecondtmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_FORMAT(Format));
+ assert_param(IS_ALARM(sAlarm->Alarm));
+ assert_param(IS_ALARM_MASK(sAlarm->AlarmMask));
+ assert_param(IS_RTC_ALARM_DATE_WEEKDAY_SEL(sAlarm->AlarmDateWeekDaySel));
+ assert_param(IS_RTC_ALARM_SUB_SECOND_VALUE(sAlarm->AlarmTime.SubSeconds));
+ assert_param(IS_RTC_ALARM_SUB_SECOND_MASK(sAlarm->AlarmSubSecondMask));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ if(Format == FORMAT_BIN)
+ {
+ if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET)
+ {
+ assert_param(IS_RTC_HOUR12(sAlarm->AlarmTime.Hours));
+ assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat));
+ }
+ else
+ {
+ sAlarm->AlarmTime.TimeFormat = 0x00;
+ assert_param(IS_RTC_HOUR24(sAlarm->AlarmTime.Hours));
+ }
+ assert_param(IS_RTC_MINUTES(sAlarm->AlarmTime.Minutes));
+ assert_param(IS_RTC_SECONDS(sAlarm->AlarmTime.Seconds));
+
+ if(sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE)
+ {
+ assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(sAlarm->AlarmDateWeekDay));
+ }
+ else
+ {
+ assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(sAlarm->AlarmDateWeekDay));
+ }
+
+ tmpreg = (((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Hours) << 16) | \
+ ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Minutes) << 8) | \
+ ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Seconds)) | \
+ ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << 16) | \
+ ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmDateWeekDay) << 24) | \
+ ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \
+ ((uint32_t)sAlarm->AlarmMask));
+ }
+ else
+ {
+ if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET)
+ {
+ tmpreg = RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours);
+ assert_param(IS_RTC_HOUR12(tmpreg));
+ assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat));
+ }
+ else
+ {
+ sAlarm->AlarmTime.TimeFormat = 0x00;
+ assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours)));
+ }
+
+ assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes)));
+ assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds)));
+
+ if(sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE)
+ {
+ tmpreg = RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay);
+ assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(tmpreg));
+ }
+ else
+ {
+ tmpreg = RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay);
+ assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(tmpreg));
+ }
+
+ tmpreg = (((uint32_t)(sAlarm->AlarmTime.Hours) << 16) | \
+ ((uint32_t)(sAlarm->AlarmTime.Minutes) << 8) | \
+ ((uint32_t) sAlarm->AlarmTime.Seconds) | \
+ ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << 16) | \
+ ((uint32_t)(sAlarm->AlarmDateWeekDay) << 24) | \
+ ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \
+ ((uint32_t)sAlarm->AlarmMask));
+ }
+
+ /* Configure the Alarm A Sub Second registers */
+ subsecondtmpreg = (uint32_t)((uint32_t)(sAlarm->AlarmTime.SubSeconds) | (uint32_t)(sAlarm->AlarmSubSecondMask));
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Disable the Alarm A interrupt */
+ __HAL_RTC_ALARMA_DISABLE(hrtc);
+
+ /* In case of interrupt mode is used, the interrupt source must disabled */
+ __HAL_RTC_ALARM_DISABLE_IT(hrtc, RTC_IT_ALRA);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till RTC ALRAWF flag is set and if Time out is reached exit */
+ while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAWF) == RESET)
+ {
+ if((HAL_GetTick()-tickstart) > RTC_TIMEOUT_VALUE)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ hrtc->Instance->ALRMAR = (uint32_t)tmpreg;
+ /* Configure the Alarm A Sub Second register */
+ hrtc->Instance->ALRMASSR = subsecondtmpreg;
+ /* Configure the Alarm state: Enable Alarm */
+ __HAL_RTC_ALARMA_ENABLE(hrtc);
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Sets the specified RTC Alarm with Interrupt
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param sAlarm: Pointer to Alarm structure
+ * @param Format: Specifies the format of the entered parameters.
+ * This parameter can be one of the following values:
+ * @arg FORMAT_BIN: Binary data format
+ * @arg FORMAT_BCD: BCD data format
+ * @note The Alarm register can only be written when the corresponding Alarm
+ * is disabled (Use the HAL_RTC_DeactivateAlarm()).
+ * @note The HAL_RTC_SetTime() must be called before enabling the Alarm feature.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_SetAlarm_IT(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format)
+{
+ uint32_t tickstart = 0;
+ uint32_t tmpreg = 0, subsecondtmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_FORMAT(Format));
+ assert_param(IS_ALARM(sAlarm->Alarm));
+ assert_param(IS_ALARM_MASK(sAlarm->AlarmMask));
+ assert_param(IS_RTC_ALARM_DATE_WEEKDAY_SEL(sAlarm->AlarmDateWeekDaySel));
+ assert_param(IS_RTC_ALARM_SUB_SECOND_VALUE(sAlarm->AlarmTime.SubSeconds));
+ assert_param(IS_RTC_ALARM_SUB_SECOND_MASK(sAlarm->AlarmSubSecondMask));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ if(Format == FORMAT_BIN)
+ {
+ if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET)
+ {
+ assert_param(IS_RTC_HOUR12(sAlarm->AlarmTime.Hours));
+ assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat));
+ }
+ else
+ {
+ sAlarm->AlarmTime.TimeFormat = 0x00;
+ assert_param(IS_RTC_HOUR24(sAlarm->AlarmTime.Hours));
+ }
+ assert_param(IS_RTC_MINUTES(sAlarm->AlarmTime.Minutes));
+ assert_param(IS_RTC_SECONDS(sAlarm->AlarmTime.Seconds));
+
+ if(sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE)
+ {
+ assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(sAlarm->AlarmDateWeekDay));
+ }
+ else
+ {
+ assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(sAlarm->AlarmDateWeekDay));
+ }
+ tmpreg = (((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Hours) << 16) | \
+ ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Minutes) << 8) | \
+ ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Seconds)) | \
+ ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << 16) | \
+ ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmDateWeekDay) << 24) | \
+ ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \
+ ((uint32_t)sAlarm->AlarmMask));
+ }
+ else
+ {
+ if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET)
+ {
+ tmpreg = RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours);
+ assert_param(IS_RTC_HOUR12(tmpreg));
+ assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat));
+ }
+ else
+ {
+ sAlarm->AlarmTime.TimeFormat = 0x00;
+ assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours)));
+ }
+
+ assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes)));
+ assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds)));
+
+ if(sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE)
+ {
+ tmpreg = RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay);
+ assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(tmpreg));
+ }
+ else
+ {
+ tmpreg = RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay);
+ assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(tmpreg));
+ }
+ tmpreg = (((uint32_t)(sAlarm->AlarmTime.Hours) << 16) | \
+ ((uint32_t)(sAlarm->AlarmTime.Minutes) << 8) | \
+ ((uint32_t) sAlarm->AlarmTime.Seconds) | \
+ ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << 16) | \
+ ((uint32_t)(sAlarm->AlarmDateWeekDay) << 24) | \
+ ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \
+ ((uint32_t)sAlarm->AlarmMask));
+ }
+ /* Configure the Alarm A Sub Second registers */
+ subsecondtmpreg = (uint32_t)((uint32_t)(sAlarm->AlarmTime.SubSeconds) | (uint32_t)(sAlarm->AlarmSubSecondMask));
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Disable the Alarm A interrupt */
+ __HAL_RTC_ALARMA_DISABLE(hrtc);
+
+ /* Clear flag alarm A */
+ __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF);
+
+ tickstart = HAL_GetTick();
+
+ /* Wait till RTC ALRAWF flag is set and if Time out is reached exit */
+ while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAWF) == RESET)
+ {
+ if((HAL_GetTick()-tickstart) > RTC_TIMEOUT_VALUE)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ hrtc->Instance->ALRMAR = (uint32_t)tmpreg;
+ /* Configure the Alarm A Sub Second register */
+ hrtc->Instance->ALRMASSR = subsecondtmpreg;
+ /* Configure the Alarm state: Enable Alarm */
+ __HAL_RTC_ALARMA_ENABLE(hrtc);
+ /* Configure the Alarm interrupt */
+ __HAL_RTC_ALARM_ENABLE_IT(hrtc,RTC_IT_ALRA);
+
+ /* RTC Alarm Interrupt Configuration: EXTI configuration */
+ __HAL_RTC_EXTI_ENABLE_IT(RTC_EXTI_LINE_ALARM_EVENT);
+
+ EXTI->RTSR |= RTC_EXTI_LINE_ALARM_EVENT;
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Deactive the specified RTC Alarm
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param Alarm: Specifies the Alarm.
+ * This parameter can be one of the following values:
+ * @arg RTC_ALARM_A: AlarmA
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_DeactivateAlarm(RTC_HandleTypeDef *hrtc, uint32_t Alarm)
+{
+ uint32_t tickstart = 0;
+
+ /* Check the parameters */
+ assert_param(IS_ALARM(Alarm));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ __HAL_RTC_ALARMA_DISABLE(hrtc);
+
+ /* In case of interrupt mode is used, the interrupt source must disabled */
+ __HAL_RTC_ALARM_DISABLE_IT(hrtc, RTC_IT_ALRA);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till RTC ALRxWF flag is set and if Time out is reached exit */
+ while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAWF) == RESET)
+ {
+ if((HAL_GetTick()-tickstart) > RTC_TIMEOUT_VALUE)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Gets the RTC Alarm value and masks.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param sAlarm: Pointer to Date structure
+ * @param Alarm: Specifies the Alarm.
+ * This parameter can be one of the following values:
+ * @arg RTC_ALARM_A: AlarmA
+ * @param Format: Specifies the format of the entered parameters.
+ * This parameter can be one of the following values:
+ * @arg FORMAT_BIN: Binary data format
+ * @arg FORMAT_BCD: BCD data format
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_GetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Alarm, uint32_t Format)
+{
+ uint32_t tmpreg = 0, subsecondtmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_FORMAT(Format));
+ assert_param(IS_ALARM(Alarm));
+
+ sAlarm->Alarm = RTC_ALARM_A;
+
+ tmpreg = (uint32_t)(hrtc->Instance->ALRMAR);
+ subsecondtmpreg = (uint32_t)((hrtc->Instance->ALRMASSR ) & RTC_ALRMASSR_SS);
+
+ /* Fill the structure with the read parameters */
+ sAlarm->AlarmTime.Hours = (uint32_t)((tmpreg & (RTC_ALRMAR_HT | RTC_ALRMAR_HU)) >> 16);
+ sAlarm->AlarmTime.Minutes = (uint32_t)((tmpreg & (RTC_ALRMAR_MNT | RTC_ALRMAR_MNU)) >> 8);
+ sAlarm->AlarmTime.Seconds = (uint32_t)(tmpreg & (RTC_ALRMAR_ST | RTC_ALRMAR_SU));
+ sAlarm->AlarmTime.TimeFormat = (uint32_t)((tmpreg & RTC_ALRMAR_PM) >> 16);
+ sAlarm->AlarmTime.SubSeconds = (uint32_t) subsecondtmpreg;
+ sAlarm->AlarmDateWeekDay = (uint32_t)((tmpreg & (RTC_ALRMAR_DT | RTC_ALRMAR_DU)) >> 24);
+ sAlarm->AlarmDateWeekDaySel = (uint32_t)(tmpreg & RTC_ALRMAR_WDSEL);
+ sAlarm->AlarmMask = (uint32_t)(tmpreg & RTC_ALARMMASK_ALL);
+
+ if(Format == FORMAT_BIN)
+ {
+ sAlarm->AlarmTime.Hours = RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours);
+ sAlarm->AlarmTime.Minutes = RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes);
+ sAlarm->AlarmTime.Seconds = RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds);
+ sAlarm->AlarmDateWeekDay = RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay);
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles Alarm interrupt request.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval None
+ */
+void HAL_RTC_AlarmIRQHandler(RTC_HandleTypeDef* hrtc)
+{
+ if(__HAL_RTC_ALARM_GET_IT(hrtc, RTC_IT_ALRA))
+ {
+ /* Get the status of the Interrupt */
+ if((uint32_t)(hrtc->Instance->CR & RTC_IT_ALRA) != (uint32_t)RESET)
+ {
+ /* AlarmA callback */
+ HAL_RTC_AlarmAEventCallback(hrtc);
+
+ /* Clear the Alarm interrupt pending bit */
+ __HAL_RTC_ALARM_CLEAR_FLAG(hrtc,RTC_FLAG_ALRAF);
+ }
+ }
+
+ /* Clear the EXTI's line Flag for RTC Alarm */
+ __HAL_RTC_EXTI_CLEAR_FLAG(RTC_EXTI_LINE_ALARM_EVENT);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+}
+
+/**
+ * @brief Alarm A callback.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval None
+ */
+__weak void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_RTC_AlarmAEventCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief This function handles AlarmA Polling request.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_PollForAlarmAEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
+{
+ uint32_t tickstart = 0;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAF) == RESET)
+ {
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0) || ((HAL_GetTick() - tickstart) > Timeout))
+ {
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Clear the Alarm interrupt pending bit */
+ __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Exported_Functions_Group4 Peripheral Control functions
+ * @brief Peripheral Control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+ [..]
+ This subsection provides functions allowing to
+ (+) Wait for RTC Time and Date Synchronization
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Waits until the RTC Time and Date registers (RTC_TR and RTC_DR) are
+ * synchronized with RTC APB clock.
+ * @note The RTC Resynchronization mode is write protected, use the
+ * __HAL_RTC_WRITEPROTECTION_DISABLE() before calling this function.
+ * @note To read the calendar through the shadow registers after Calendar
+ * initialization, calendar update or after wake-up from low power modes
+ * the software must first clear the RSF flag.
+ * The software must then wait until it is set again before reading
+ * the calendar, which means that the calendar registers have been
+ * correctly copied into the RTC_TR and RTC_DR shadow registers.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_WaitForSynchro(RTC_HandleTypeDef* hrtc)
+{
+ uint32_t tickstart = 0;
+
+ /* Clear RSF flag */
+ hrtc->Instance->ISR &= (uint32_t)RTC_RSF_MASK;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait the registers to be synchronised */
+ while((hrtc->Instance->ISR & RTC_ISR_RSF) == (uint32_t)RESET)
+ {
+ if((HAL_GetTick()-tickstart) > RTC_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Exported_Functions_Group5 Peripheral State functions
+ * @brief Peripheral State functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral State functions #####
+ ===============================================================================
+ [..]
+ This subsection provides functions allowing to
+ (+) Get RTC state
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Returns the RTC state.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval HAL state
+ */
+HAL_RTCStateTypeDef HAL_RTC_GetState(RTC_HandleTypeDef* hrtc)
+{
+ return hrtc->State;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Private_Functions RTC Private Functions
+ * @{
+ */
+
+/**
+ * @brief Enters the RTC Initialization mode.
+ * @note The RTC Initialization mode is write protected, use the
+ * __HAL_RTC_WRITEPROTECTION_DISABLE() before calling this function.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval HAL status:
+ * - HAL_OK : RTC is in Init mode
+ * - HAL_TIMEOUT : RTC is not in Init mode and in Timeout
+ */
+HAL_StatusTypeDef RTC_EnterInitMode(RTC_HandleTypeDef* hrtc)
+{
+ uint32_t tickstart = 0;
+
+ /* Check if the Initialization mode is set */
+ if((hrtc->Instance->ISR & RTC_ISR_INITF) == (uint32_t)RESET)
+ {
+ /* Set the Initialization mode */
+ hrtc->Instance->ISR = (uint32_t)RTC_INIT_MASK;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till RTC is in INIT state and if Time out is reached exit */
+ while((hrtc->Instance->ISR & RTC_ISR_INITF) == (uint32_t)RESET)
+ {
+ if((HAL_GetTick()-tickstart) > RTC_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Converts a 2 digit decimal to BCD format.
+ * @param Value: Byte to be converted
+ * @retval Converted byte
+ */
+uint8_t RTC_ByteToBcd2(uint8_t Value)
+{
+ uint32_t bcdhigh = 0;
+
+ while(Value >= 10)
+ {
+ bcdhigh++;
+ Value -= 10;
+ }
+
+ return ((uint8_t)(bcdhigh << 4) | Value);
+}
+
+/**
+ * @brief Converts from 2 digit BCD to Binary.
+ * @param Value: BCD value to be converted
+ * @retval Converted word
+ */
+uint8_t RTC_Bcd2ToByte(uint8_t Value)
+{
+ uint32_t tmp = 0;
+ tmp = ((uint8_t)(Value & (uint8_t)0xF0) >> (uint8_t)0x4) * 10;
+ return (tmp + (Value & (uint8_t)0x0F));
+}
+
+/**
+ * @}
+ */
+
+#endif /* HAL_RTC_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/src/stm32f0xx_hal_rtc_ex.c b/f0/src/stm32f0xx_hal_rtc_ex.c
new file mode 100755
index 0000000000000000000000000000000000000000..bd9419aefdd48ecee21b102d1ffbe2b2350282f6
--- /dev/null
+++ b/f0/src/stm32f0xx_hal_rtc_ex.c
@@ -0,0 +1,1577 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_rtc_ex.c
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief Extended RTC HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Real Time Clock (RTC) Extension peripheral:
+ * + RTC TimeStamp functions
+ * + RTC Tamper functions
+ * + RTC Wake-up functions
+ * + Extension Control functions
+ * + Extension RTC features functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (+) Enable the RTC domain access (see description in the section above).
+ (+) Configure the RTC Prescaler (Asynchronous and Synchronous) and RTC hour
+ format using the HAL_RTC_Init() function.
+
+ *** RTC Wake-up configuration ***
+ ================================
+ [..]
+ (+) To configure the RTC Wake-up Clock source and Counter use the HAL_RTCEx_SetWakeUpTimer()
+ function. You can also configure the RTC Wake-up timer in interrupt mode
+ using the HAL_RTCEx_SetWakeUpTimer_IT() function.
+ (+) To read the RTC Wake-up Counter register, use the HAL_RTCEx_GetWakeUpTimer()
+ function.
+ (@) Not available on F030x4/x6/x8 and F070x6
+
+ *** TimeStamp configuration ***
+ ===============================
+ [..]
+ (+) Configure the RTC_AF trigger and enable the RTC TimeStamp using the
+ HAL_RTCEx_SetTimeStamp() function. You can also configure the RTC TimeStamp with
+ interrupt mode using the HAL_RTCEx_SetTimeStamp_IT() function.
+ (+) To read the RTC TimeStamp Time and Date register, use the HAL_RTCEx_GetTimeStamp()
+ function.
+
+ *** Tamper configuration ***
+ ============================
+ [..]
+ (+) Enable the RTC Tamper and configure the Tamper filter count, trigger Edge
+ or Level according to the Tamper filter (if equal to 0 Edge else Level)
+ value, sampling frequency, precharge or discharge and Pull-UP using the
+ HAL_RTCEx_SetTamper() function. You can configure RTC Tamper in interrupt
+ mode using HAL_RTCEx_SetTamper_IT() function.
+
+ *** Backup Data Registers configuration ***
+ ===========================================
+ [..]
+ (+) To write to the RTC Backup Data registers, use the HAL_RTCEx_BKUPWrite()
+ function.
+ (+) To read the RTC Backup Data registers, use the HAL_RTCEx_BKUPRead()
+ function.
+ (@) Not available on F030x6/x8/xC and F070x6/xB (F0xx Value Line devices)
+
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup RTCEx RTCEx Extended HAL module driver
+ * @brief RTCEx Extended HAL module driver
+ * @{
+ */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions
+ * @{
+ */
+
+/** @defgroup RTCEx_Exported_Functions_Group1 RTC TimeStamp and Tamper functions
+ * @brief RTC TimeStamp and Tamper functions
+ *
+@verbatim
+ ===============================================================================
+ ##### RTC TimeStamp and Tamper functions #####
+ ===============================================================================
+
+ [..] This section provides functions allowing to configure TimeStamp feature
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Sets TimeStamp.
+ * @note This API must be called before enabling the TimeStamp feature.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param TimeStampEdge: Specifies the pin edge on which the TimeStamp is
+ * activated.
+ * This parameter can be one of the following values:
+ * @arg RTC_TIMESTAMPEDGE_RISING: the Time stamp event occurs on the
+ * rising edge of the related pin.
+ * @arg RTC_TIMESTAMPEDGE_FALLING: the Time stamp event occurs on the
+ * falling edge of the related pin.
+ * @param RTC_TimeStampPin: specifies the RTC TimeStamp Pin.
+ * This parameter can be one of the following values:
+ * @arg RTC_TIMESTAMPPIN_PC13: PC13 is selected as RTC TimeStamp Pin.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIMESTAMP_EDGE(TimeStampEdge));
+ assert_param(IS_RTC_TIMESTAMP_PIN(RTC_TimeStampPin));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Get the RTC_CR register and clear the bits to be configured */
+ tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE));
+
+ tmpreg|= TimeStampEdge;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Configure the Time Stamp TSEDGE and Enable bits */
+ hrtc->Instance->CR = (uint32_t)tmpreg;
+
+ __HAL_RTC_TIMESTAMP_ENABLE(hrtc);
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Sets TimeStamp with Interrupt.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @note This API must be called before enabling the TimeStamp feature.
+ * @param TimeStampEdge: Specifies the pin edge on which the TimeStamp is
+ * activated.
+ * This parameter can be one of the following values:
+ * @arg RTC_TIMESTAMPEDGE_RISING: the Time stamp event occurs on the
+ * rising edge of the related pin.
+ * @arg RTC_TIMESTAMPEDGE_FALLING: the Time stamp event occurs on the
+ * falling edge of the related pin.
+ * @param RTC_TimeStampPin: Specifies the RTC TimeStamp Pin.
+ * This parameter can be one of the following values:
+ * @arg RTC_TIMESTAMPPIN_PC13: PC13 is selected as RTC TimeStamp Pin.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIMESTAMP_EDGE(TimeStampEdge));
+ assert_param(IS_RTC_TIMESTAMP_PIN(RTC_TimeStampPin));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Get the RTC_CR register and clear the bits to be configured */
+ tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE));
+
+ tmpreg |= TimeStampEdge;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Configure the Time Stamp TSEDGE and Enable bits */
+ hrtc->Instance->CR = (uint32_t)tmpreg;
+
+ __HAL_RTC_TIMESTAMP_ENABLE(hrtc);
+
+ /* Enable IT timestamp */
+ __HAL_RTC_TIMESTAMP_ENABLE_IT(hrtc,RTC_IT_TS);
+
+ /* RTC timestamp Interrupt Configuration: EXTI configuration */
+ __HAL_RTC_EXTI_ENABLE_IT(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT);
+
+ EXTI->RTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT;
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Deactivates TimeStamp.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc)
+{
+ uint32_t tmpreg = 0;
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* In case of interrupt mode is used, the interrupt source must disabled */
+ __HAL_RTC_TIMESTAMP_DISABLE_IT(hrtc, RTC_IT_TS);
+
+ /* Get the RTC_CR register and clear the bits to be configured */
+ tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE));
+
+ /* Configure the Time Stamp TSEDGE and Enable bits */
+ hrtc->Instance->CR = (uint32_t)tmpreg;
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Gets the RTC TimeStamp value.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param sTimeStamp: Pointer to Time structure
+ * @param sTimeStampDate: Pointer to Date structure
+ * @param Format: specifies the format of the entered parameters.
+ * This parameter can be one of the following values:
+ * @arg FORMAT_BIN: Binary data format
+ * @arg FORMAT_BCD: BCD data format
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef* sTimeStamp, RTC_DateTypeDef* sTimeStampDate, uint32_t Format)
+{
+ uint32_t tmptime = 0, tmpdate = 0;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_FORMAT(Format));
+
+ /* Get the TimeStamp time and date registers values */
+ tmptime = (uint32_t)(hrtc->Instance->TSTR & RTC_TR_RESERVED_MASK);
+ tmpdate = (uint32_t)(hrtc->Instance->TSDR & RTC_DR_RESERVED_MASK);
+
+ /* Fill the Time structure fields with the read parameters */
+ sTimeStamp->Hours = (uint8_t)((tmptime & (RTC_TR_HT | RTC_TR_HU)) >> 16);
+ sTimeStamp->Minutes = (uint8_t)((tmptime & (RTC_TR_MNT | RTC_TR_MNU)) >> 8);
+ sTimeStamp->Seconds = (uint8_t)(tmptime & (RTC_TR_ST | RTC_TR_SU));
+ sTimeStamp->TimeFormat = (uint8_t)((tmptime & (RTC_TR_PM)) >> 16);
+ sTimeStamp->SubSeconds = (uint32_t) hrtc->Instance->TSSSR;
+
+ /* Fill the Date structure fields with the read parameters */
+ sTimeStampDate->Year = 0;
+ sTimeStampDate->Month = (uint8_t)((tmpdate & (RTC_DR_MT | RTC_DR_MU)) >> 8);
+ sTimeStampDate->Date = (uint8_t)(tmpdate & (RTC_DR_DT | RTC_DR_DU));
+ sTimeStampDate->WeekDay = (uint8_t)((tmpdate & (RTC_DR_WDU)) >> 13);
+
+ /* Check the input parameters format */
+ if(Format == FORMAT_BIN)
+ {
+ /* Convert the TimeStamp structure parameters to Binary format */
+ sTimeStamp->Hours = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Hours);
+ sTimeStamp->Minutes = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Minutes);
+ sTimeStamp->Seconds = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Seconds);
+
+ /* Convert the DateTimeStamp structure parameters to Binary format */
+ sTimeStampDate->Month = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->Month);
+ sTimeStampDate->Date = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->Date);
+ sTimeStampDate->WeekDay = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->WeekDay);
+ }
+
+ /* Clear the TIMESTAMP Flag */
+ __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSF);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Sets Tamper
+ * @note By calling this API we disable the tamper interrupt for all tampers.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param sTamper: Pointer to Tamper Structure.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TAMPER(sTamper->Tamper));
+ assert_param(IS_TAMPER_TRIGGER(sTamper->Trigger));
+ assert_param(IS_TAMPER_FILTER(sTamper->Filter));
+ assert_param(IS_TAMPER_SAMPLING_FREQ(sTamper->SamplingFrequency));
+ assert_param(IS_TAMPER_PRECHARGE_DURATION(sTamper->PrechargeDuration));
+ assert_param(IS_TAMPER_PULLUP_STATE(sTamper->TamperPullUp));
+ assert_param(IS_TAMPER_TIMESTAMPONTAMPER_DETECTION(sTamper->TimeStampOnTamperDetection));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ if(sTamper->Trigger != RTC_TAMPERTRIGGER_RISINGEDGE)
+ {
+ sTamper->Trigger = (uint32_t)(sTamper->Tamper << 1);
+ }
+
+ tmpreg = ((uint32_t)sTamper->Tamper | (uint32_t)sTamper->Trigger | (uint32_t)sTamper->Filter |\
+ (uint32_t)sTamper->SamplingFrequency | (uint32_t)sTamper->PrechargeDuration |\
+ (uint32_t)sTamper->TamperPullUp | sTamper->TimeStampOnTamperDetection);
+
+ hrtc->Instance->TAFCR &= (uint32_t)~((uint32_t)sTamper->Tamper | (uint32_t)(sTamper->Tamper << 1) | (uint32_t)RTC_TAFCR_TAMPTS |\
+ (uint32_t)RTC_TAFCR_TAMPFREQ | (uint32_t)RTC_TAFCR_TAMPFLT | (uint32_t)RTC_TAFCR_TAMPPRCH |\
+ (uint32_t)RTC_TAFCR_TAMPPUDIS | (uint32_t)RTC_TAFCR_TAMPIE);
+
+ hrtc->Instance->TAFCR |= tmpreg;
+
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Sets Tamper with interrupt.
+ * @note By calling this API we force the tamper interrupt for all tampers.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param sTamper: Pointer to RTC Tamper.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TAMPER(sTamper->Tamper));
+ assert_param(IS_TAMPER_TRIGGER(sTamper->Trigger));
+ assert_param(IS_TAMPER_FILTER(sTamper->Filter));
+ assert_param(IS_TAMPER_SAMPLING_FREQ(sTamper->SamplingFrequency));
+ assert_param(IS_TAMPER_PRECHARGE_DURATION(sTamper->PrechargeDuration));
+ assert_param(IS_TAMPER_PULLUP_STATE(sTamper->TamperPullUp));
+ assert_param(IS_TAMPER_TIMESTAMPONTAMPER_DETECTION(sTamper->TimeStampOnTamperDetection));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Configure the tamper trigger */
+ if(sTamper->Trigger != RTC_TAMPERTRIGGER_RISINGEDGE)
+ {
+ sTamper->Trigger = (uint32_t)(sTamper->Tamper << 1);
+ }
+
+ tmpreg = ((uint32_t)sTamper->Tamper | (uint32_t)sTamper->Trigger | (uint32_t)sTamper->Filter |\
+ (uint32_t)sTamper->SamplingFrequency | (uint32_t)sTamper->PrechargeDuration |\
+ (uint32_t)sTamper->TamperPullUp | sTamper->TimeStampOnTamperDetection);
+
+ hrtc->Instance->TAFCR &= (uint32_t)~((uint32_t)sTamper->Tamper | (uint32_t)(sTamper->Tamper << 1) | (uint32_t)RTC_TAFCR_TAMPTS |\
+ (uint32_t)RTC_TAFCR_TAMPFREQ | (uint32_t)RTC_TAFCR_TAMPFLT | (uint32_t)RTC_TAFCR_TAMPPRCH |\
+ (uint32_t)RTC_TAFCR_TAMPPUDIS);
+
+ hrtc->Instance->TAFCR |= tmpreg;
+
+ /* Configure the Tamper Interrupt in the RTC_TAFCR */
+ hrtc->Instance->TAFCR |= (uint32_t)RTC_TAFCR_TAMPIE;
+
+ /* RTC Tamper Interrupt Configuration: EXTI configuration */
+ __HAL_RTC_EXTI_ENABLE_IT(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT);
+
+ EXTI->RTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT;
+
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Deactivates Tamper.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param Tamper: Selected tamper pin.
+ * This parameter can be any combination of RTC_TAMPER_1, RTC_TAMPER_2 and RTC_TAMPER_3.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper)
+{
+ assert_param(IS_TAMPER(Tamper));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the selected Tamper pin */
+ hrtc->Instance->TAFCR &= (uint32_t)~Tamper;
+
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles TimeStamp interrupt request.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval None
+ */
+void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc)
+{
+ if(__HAL_RTC_TIMESTAMP_GET_IT(hrtc, RTC_IT_TS))
+ {
+ /* Get the status of the Interrupt */
+ if((uint32_t)(hrtc->Instance->CR & RTC_IT_TS) != (uint32_t)RESET)
+ {
+ /* TIMESTAMP callback */
+ HAL_RTCEx_TimeStampEventCallback(hrtc);
+
+ /* Clear the TIMESTAMP interrupt pending bit */
+ __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc,RTC_FLAG_TSF);
+ }
+ }
+
+ /* Get the status of the Interrupt */
+ if(__HAL_RTC_TAMPER_GET_IT(hrtc,RTC_IT_TAMP1))
+ {
+ /* Get the TAMPER Interrupt enable bit and pending bit */
+ if(((hrtc->Instance->TAFCR & (RTC_TAFCR_TAMPIE))) != (uint32_t)RESET)
+ {
+ /* Tamper callback */
+ HAL_RTCEx_Tamper1EventCallback(hrtc);
+
+ /* Clear the Tamper interrupt pending bit */
+ __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc,RTC_FLAG_TAMP1F);
+ }
+ }
+
+ /* Get the status of the Interrupt */
+ if(__HAL_RTC_TAMPER_GET_IT(hrtc, RTC_IT_TAMP2))
+ {
+ /* Get the TAMPER Interrupt enable bit and pending bit */
+ if(((hrtc->Instance->TAFCR & RTC_TAFCR_TAMPIE)) != (uint32_t)RESET)
+ {
+ /* Tamper callback */
+ HAL_RTCEx_Tamper2EventCallback(hrtc);
+
+ /* Clear the Tamper interrupt pending bit */
+ __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP2F);
+ }
+ }
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+ /* Get the status of the Interrupt */
+ if(__HAL_RTC_TAMPER_GET_IT(hrtc, RTC_IT_TAMP3))
+ {
+ /* Get the TAMPER Interrupt enable bit and pending bit */
+ if(((hrtc->Instance->TAFCR & RTC_TAFCR_TAMPIE)) != (uint32_t)RESET)
+ {
+ /* Tamper callback */
+ HAL_RTCEx_Tamper3EventCallback(hrtc);
+
+ /* Clear the Tamper interrupt pending bit */
+ __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP3F);
+ }
+ }
+#endif
+
+ /* Clear the EXTI's Flag for RTC TimeStamp and Tamper */
+ __HAL_RTC_EXTI_CLEAR_FLAG(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+}
+
+/**
+ * @brief TimeStamp callback.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval None
+ */
+__weak void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_RTCEx_TimeStampEventCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Tamper 1 callback.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval None
+ */
+__weak void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_RTCEx_Tamper1EventCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Tamper 2 callback.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval None
+ */
+__weak void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_RTCEx_Tamper2EventCallback could be implemented in the user file
+ */
+}
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+/**
+ * @brief Tamper 3 callback.
+ * @param hrtc: RTC handle
+ * @retval None
+ */
+__weak void HAL_RTCEx_Tamper3EventCallback(RTC_HandleTypeDef *hrtc)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_RTCEx_Tamper3EventCallback could be implemented in the user file
+ */
+}
+#endif
+
+/**
+ * @brief This function handles TimeStamp polling request.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
+{
+ uint32_t tickstart = 0;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(__HAL_RTC_TIMESTAMP_GET_FLAG(hrtc, RTC_FLAG_TSF) == RESET)
+ {
+ if(__HAL_RTC_TIMESTAMP_GET_FLAG(hrtc, RTC_FLAG_TSOVF) != RESET)
+ {
+ /* Clear the TIMESTAMP Overrun Flag */
+ __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSOVF);
+
+ /* Change TIMESTAMP state */
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ return HAL_ERROR;
+ }
+
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0) || ((HAL_GetTick() - tickstart) > Timeout))
+ {
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles Tamper1 Polling.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
+{
+ uint32_t tickstart = 0;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Get the status of the Interrupt */
+ while(__HAL_RTC_TAMPER_GET_FLAG(hrtc,RTC_FLAG_TAMP1F)== RESET)
+ {
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0) || ((HAL_GetTick() - tickstart) > Timeout))
+ {
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Clear the Tamper Flag */
+ __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc,RTC_FLAG_TAMP1F);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles Tamper2 Polling.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
+{
+ uint32_t tickstart = 0;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Get the status of the Interrupt */
+ while(__HAL_RTC_TAMPER_GET_FLAG(hrtc,RTC_FLAG_TAMP2F) == RESET)
+ {
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0) || ((HAL_GetTick() - tickstart) > Timeout))
+ {
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Clear the Tamper Flag */
+ __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc,RTC_FLAG_TAMP2F);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ return HAL_OK;
+}
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+/**
+ * @brief This function handles Tamper3 Polling.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper3Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
+{
+ uint32_t tickstart = 0;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Get the status of the Interrupt */
+ while(__HAL_RTC_TAMPER_GET_FLAG(hrtc,RTC_FLAG_TAMP3F) == RESET)
+ {
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0) || ((HAL_GetTick() - tickstart) > Timeout))
+ {
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Clear the Tamper Flag */
+ __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc,RTC_FLAG_TAMP3F);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ return HAL_OK;
+}
+#endif
+
+/**
+ * @}
+ */
+
+#if defined(STM32F070xB) || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+/** @defgroup RTCEx_Exported_Functions_Group2 RTC Wake-up functions
+ * @brief RTC Wake-up functions
+ *
+@verbatim
+ ===============================================================================
+ ##### RTC Wake-up functions #####
+ ===============================================================================
+
+ [..] This section provides functions allowing to configure Wake-up feature
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Sets wake up timer.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param WakeUpCounter: Wake up counter
+ * @param WakeUpClock: Wake up clock
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock)
+{
+ uint32_t tickstart = 0;
+
+ /* Check the parameters */
+ assert_param(IS_WAKEUP_CLOCK(WakeUpClock));
+ assert_param(IS_WAKEUP_COUNTER(WakeUpCounter));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ __HAL_RTC_WAKEUPTIMER_DISABLE(hrtc);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till RTC WUTWF flag is set and if Time out is reached exit */
+ while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == RESET)
+ {
+ if((HAL_GetTick()-tickstart) > RTC_TIMEOUT_VALUE)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear the Wake-up Timer clock source bits in CR register */
+ hrtc->Instance->CR &= (uint32_t)~RTC_CR_WUCKSEL;
+
+ /* Configure the clock source */
+ hrtc->Instance->CR |= (uint32_t)WakeUpClock;
+
+ /* Configure the Wake-up Timer counter */
+ hrtc->Instance->WUTR = (uint32_t)WakeUpCounter;
+
+ /* Enable the Wake-up Timer */
+ __HAL_RTC_WAKEUPTIMER_ENABLE(hrtc);
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Sets wake up timer with interrupt
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param WakeUpCounter: Wake up counter
+ * @param WakeUpClock: Wake up clock
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock)
+{
+ uint32_t tickstart = 0;
+
+ /* Check the parameters */
+ assert_param(IS_WAKEUP_CLOCK(WakeUpClock));
+ assert_param(IS_WAKEUP_COUNTER(WakeUpCounter));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ __HAL_RTC_WAKEUPTIMER_DISABLE(hrtc);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till RTC WUTWF flag is set and if Time out is reached exit */
+ while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == RESET)
+ {
+ if((HAL_GetTick()-tickstart) > RTC_TIMEOUT_VALUE)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Configure the Wake-up Timer counter */
+ hrtc->Instance->WUTR = (uint32_t)WakeUpCounter;
+
+ /* Clear the Wake-up Timer clock source bits in CR register */
+ hrtc->Instance->CR &= (uint32_t)~RTC_CR_WUCKSEL;
+
+ /* Configure the clock source */
+ hrtc->Instance->CR |= (uint32_t)WakeUpClock;
+
+ /* RTC WakeUpTimer Interrupt Configuration: EXTI configuration */
+ __HAL_RTC_EXTI_ENABLE_IT(RTC_EXTI_LINE_WAKEUPTIMER_EVENT);
+
+ EXTI->RTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT;
+
+ /* Configure the Interrupt in the RTC_CR register */
+ __HAL_RTC_WAKEUPTIMER_ENABLE_IT(hrtc,RTC_IT_WUT);
+
+ /* Enable the Wake-up Timer */
+ __HAL_RTC_WAKEUPTIMER_ENABLE(hrtc);
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Deactivates wake up timer counter.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval HAL status
+ */
+uint32_t HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc)
+{
+ uint32_t tickstart = 0;
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Disable the Wake-up Timer */
+ __HAL_RTC_WAKEUPTIMER_DISABLE(hrtc);
+
+ /* In case of interrupt mode is used, the interrupt source must disabled */
+ __HAL_RTC_WAKEUPTIMER_DISABLE_IT(hrtc,RTC_IT_WUT);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till RTC WUTWF flag is set and if Time out is reached exit */
+ while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == RESET)
+ {
+ if((HAL_GetTick()-tickstart) > RTC_TIMEOUT_VALUE)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Gets wake up timer counter.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval Counter value
+ */
+uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc)
+{
+ /* Get the counter value */
+ return ((uint32_t)(hrtc->Instance->WUTR & RTC_WUTR_WUT));
+}
+
+/**
+ * @brief This function handles Wake Up Timer interrupt request.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval None
+ */
+void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc)
+{
+ if(__HAL_RTC_WAKEUPTIMER_GET_IT(hrtc, RTC_IT_WUT))
+ {
+ /* Get the status of the Interrupt */
+ if((uint32_t)(hrtc->Instance->CR & RTC_IT_WUT) != (uint32_t)RESET)
+ {
+ /* WAKEUPTIMER callback */
+ HAL_RTCEx_WakeUpTimerEventCallback(hrtc);
+
+ /* Clear the WAKEUPTIMER interrupt pending bit */
+ __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(hrtc, RTC_FLAG_WUTF);
+ }
+ }
+
+ /* Clear the EXTI's line Flag for RTC WakeUpTimer */
+ __HAL_RTC_EXTI_CLEAR_FLAG(RTC_EXTI_LINE_WAKEUPTIMER_EVENT);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+}
+
+/**
+ * @brief Wake Up Timer callback.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval None
+ */
+__weak void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_RTCEx_WakeUpTimerEventCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief This function handles Wake Up Timer Polling.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
+{
+ uint32_t tickstart = 0;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTF) == RESET)
+ {
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0) || ((HAL_GetTick() - tickstart) > Timeout))
+ {
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Clear the WAKEUPTIMER Flag */
+ __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(hrtc, RTC_FLAG_WUTF);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+#endif /* defined(STM32F070xB) || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) | defined(STM32F030xC) */
+
+/** @defgroup RTCEx_Exported_Functions_Group3 Extension Peripheral Control functions
+ * @brief Extension Peripheral Control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Extension Peripheral Control functions #####
+ ===============================================================================
+ [..]
+ This subsection provides functions allowing to
+ (+) Write a data in a specified RTC Backup data register
+ (+) Read a data in a specified RTC Backup data register
+ (+) Set the Coarse calibration parameters.
+ (+) Deactivate the Coarse calibration parameters
+ (+) Set the Smooth calibration parameters.
+ (+) Configure the Synchronization Shift Control Settings.
+ (+) Configure the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz).
+ (+) Deactivate the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz).
+ (+) Enable the RTC reference clock detection.
+ (+) Disable the RTC reference clock detection.
+ (+) Enable the Bypass Shadow feature.
+ (+) Disable the Bypass Shadow feature.
+
+@endverbatim
+ * @{
+ */
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+/**
+ * @brief Writes a data in a specified RTC Backup data register.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param BackupRegister: RTC Backup data Register number.
+ * This parameter can be: RTC_BKP_DRx where x can be from 0 to 4 to
+ * specify the register.
+ * @param Data: Data to be written in the specified RTC Backup data register.
+ * @retval None
+ */
+void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data)
+{
+ uint32_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_BKP(BackupRegister));
+
+ tmp = (uint32_t)&(hrtc->Instance->BKP0R);
+ tmp += (BackupRegister * 4);
+
+ /* Write the specified register */
+ *(__IO uint32_t *)tmp = (uint32_t)Data;
+}
+
+/**
+ * @brief Reads data from the specified RTC Backup data Register.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param BackupRegister: RTC Backup data Register number.
+ * This parameter can be: RTC_BKP_DRx where x can be from 0 to 4 to
+ * specify the register.
+ * @retval Read value
+ */
+uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister)
+{
+ uint32_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_BKP(BackupRegister));
+
+ tmp = (uint32_t)&(hrtc->Instance->BKP0R);
+ tmp += (BackupRegister * 4);
+
+ /* Read the specified register */
+ return (*(__IO uint32_t *)tmp);
+}
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
+
+/**
+ * @brief Sets the Smooth calibration parameters.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param SmoothCalibPeriod: Select the Smooth Calibration Period.
+ * This parameter can be can be one of the following values :
+ * @arg RTC_SMOOTHCALIB_PERIOD_32SEC: The smooth calibration period is 32s.
+ * @arg RTC_SMOOTHCALIB_PERIOD_16SEC: The smooth calibration period is 16s.
+ * @arg RTC_SMOOTHCALIB_PERIOD_8SEC: The smooth calibration period is 8s.
+ * @param SmoothCalibPlusPulses: Select to Set or reset the CALP bit.
+ * This parameter can be one of the following values:
+ * @arg RTC_SMOOTHCALIB_PLUSPULSES_SET: Add one RTCCLK pulse every 2*11 pulses.
+ * @arg RTC_SMOOTHCALIB_PLUSPULSES_RESET: No RTCCLK pulses are added.
+ * @param SmouthCalibMinusPulsesValue: Select the value of CALM[8:0] bits.
+ * This parameter can be one any value from 0 to 0x000001FF.
+ * @note To deactivate the smooth calibration, the field SmoothCalibPlusPulses
+ * must be equal to SMOOTHCALIB_PLUSPULSES_RESET and the field
+ * SmouthCalibMinusPulsesValue must be equal to 0.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef* hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmouthCalibMinusPulsesValue)
+{
+ uint32_t tickstart = 0;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_SMOOTH_CALIB_PERIOD(SmoothCalibPeriod));
+ assert_param(IS_RTC_SMOOTH_CALIB_PLUS(SmoothCalibPlusPulses));
+ assert_param(IS_RTC_SMOOTH_CALIB_MINUS(SmouthCalibMinusPulsesValue));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* check if a calibration is pending*/
+ if((hrtc->Instance->ISR & RTC_ISR_RECALPF) != RESET)
+ {
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* check if a calibration is pending*/
+ while((hrtc->Instance->ISR & RTC_ISR_RECALPF) != RESET)
+ {
+ if((HAL_GetTick()-tickstart) > RTC_TIMEOUT_VALUE)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Configure the Smooth calibration settings */
+ hrtc->Instance->CALR = (uint32_t)((uint32_t)SmoothCalibPeriod | (uint32_t)SmoothCalibPlusPulses | (uint32_t)SmouthCalibMinusPulsesValue);
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the Synchronization Shift Control Settings.
+ * @note When REFCKON is set, firmware must not write to Shift control register.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param ShiftAdd1S: Select to add or not 1 second to the time calendar.
+ * This parameter can be one of the following values :
+ * @arg RTC_SHIFTADD1S_SET: Add one second to the clock calendar.
+ * @arg RTC_SHIFTADD1S_RESET: No effect.
+ * @param ShiftSubFS: Select the number of Second Fractions to substitute.
+ * This parameter can be one any value from 0 to 0x7FFF.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef* hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS)
+{
+ uint32_t tickstart = 0;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_SHIFT_ADD1S(ShiftAdd1S));
+ assert_param(IS_RTC_SHIFT_SUBFS(ShiftSubFS));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait until the shift is completed*/
+ while((hrtc->Instance->ISR & RTC_ISR_SHPF) != RESET)
+ {
+ if((HAL_GetTick()-tickstart) > RTC_TIMEOUT_VALUE)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Check if the reference clock detection is disabled */
+ if((hrtc->Instance->CR & RTC_CR_REFCKON) == RESET)
+ {
+ /* Configure the Shift settings */
+ hrtc->Instance->SHIFTR = (uint32_t)(uint32_t)(ShiftSubFS) | (uint32_t)(ShiftAdd1S);
+
+ /* If RTC_CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */
+ if((hrtc->Instance->CR & RTC_CR_BYPSHAD) == RESET)
+ {
+ if(HAL_RTC_WaitForSynchro(hrtc) != HAL_OK)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_ERROR;
+ }
+ }
+ }
+ else
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_ERROR;
+ }
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz).
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param CalibOutput : Select the Calibration output Selection .
+ * This parameter can be one of the following values:
+ * @arg RTC_CALIBOUTPUT_512HZ: A signal has a regular waveform at 512Hz.
+ * @arg RTC_CALIBOUTPUT_1HZ: A signal has a regular waveform at 1Hz.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef* hrtc, uint32_t CalibOutput)
+{
+ /* Check the parameters */
+ assert_param(IS_RTC_CALIB_OUTPUT(CalibOutput));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Clear flags before config */
+ hrtc->Instance->CR &= (uint32_t)~RTC_CR_COSEL;
+
+ /* Configure the RTC_CR register */
+ hrtc->Instance->CR |= (uint32_t)CalibOutput;
+
+ __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(hrtc);
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Deactivates the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz).
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef* hrtc)
+{
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(hrtc);
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enables the RTC reference clock detection.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef* hrtc)
+{
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Set Initialization mode */
+ if(RTC_EnterInitMode(hrtc) != HAL_OK)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Set RTC state*/
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_ERROR;
+ }
+ else
+ {
+ __HAL_RTC_CLOCKREF_DETECTION_ENABLE(hrtc);
+
+ /* Exit Initialization mode */
+ hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT;
+ }
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disable the RTC reference clock detection.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef* hrtc)
+{
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Set Initialization mode */
+ if(RTC_EnterInitMode(hrtc) != HAL_OK)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Set RTC state*/
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_ERROR;
+ }
+ else
+ {
+ __HAL_RTC_CLOCKREF_DETECTION_DISABLE(hrtc);
+
+ /* Exit Initialization mode */
+ hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT;
+ }
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enables the Bypass Shadow feature.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @note When the Bypass Shadow is enabled the calendar value are taken
+ * directly from the Calendar counter.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef* hrtc)
+{
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Set the BYPSHAD bit */
+ hrtc->Instance->CR |= (uint8_t)RTC_CR_BYPSHAD;
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disables the Bypass Shadow feature.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @note When the Bypass Shadow is enabled the calendar value are taken
+ * directly from the Calendar counter.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef* hrtc)
+{
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Reset the BYPSHAD bit */
+ hrtc->Instance->CR &= (uint8_t)~RTC_CR_BYPSHAD;
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_RTC_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/src/stm32f0xx_hal_smartcard.c b/f0/src/stm32f0xx_hal_smartcard.c
new file mode 100755
index 0000000000000000000000000000000000000000..c3f4619278187d0db396f98fe88358bbeaf68355
--- /dev/null
+++ b/f0/src/stm32f0xx_hal_smartcard.c
@@ -0,0 +1,1431 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_smartcard.c
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief SMARTCARD HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the SMARTCARD peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral State and Errors functions
+ * + Peripheral Control functions
+ *
+ @verbatim
+ ===============================================================================
+ ##### How to use this driver #####
+ ===============================================================================
+ [..]
+ The SMARTCARD HAL driver can be used as follows:
+
+ (#) Declare a SMARTCARD_HandleTypeDef handle structure.
+ (#) Initialize the SMARTCARD low level resources by implementing the HAL_SMARTCARD_MspInit ()API:
+ (++) Enable the USARTx interface clock.
+ (++) SMARTCARD pins configuration:
+ (+++) Enable the clock for the SMARTCARD GPIOs.
+ (+++) Configure these SMARTCARD pins as alternate function pull-up.
+ (++) NVIC configuration if you need to use interrupt process (HAL_SMARTCARD_Transmit_IT()
+ and HAL_SMARTCARD_Receive_IT() APIs):
+ (+++) Configure the USARTx interrupt priority.
+ (+++) Enable the NVIC USART IRQ handle.
+ (++) DMA Configuration if you need to use DMA process (HAL_SMARTCARD_Transmit_DMA()
+ and HAL_SMARTCARD_Receive_DMA() APIs):
+ (+++) Declare a DMA handle structure for the Tx/Rx channel.
+ (+++) Enable the DMAx interface clock.
+ (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters.
+ (+++) Configure the DMA Tx/Rx channel.
+ (+++) Associate the initialized DMA handle to the SMARTCARD DMA Tx/Rx handle.
+ (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx/Rx channel.
+
+ (#) Program the Baud Rate, Parity, Mode(Receiver/Transmitter), clock enabling/disabling and accordingly,
+ the clock parameters (parity, phase, last bit), prescaler value, guard time and NACK on transmission
+ error enabling or disabling in the hsmartcard Init structure.
+
+ (#) If required, program SMARTCARD advanced features (TX/RX pins swap, TimeOut, auto-retry counter,...)
+ in the hsmartcard AdvancedInit structure.
+
+ (#) Initialize the SMARTCARD associated USART registers by calling the HAL_SMARTCARD_Init() API:
+ (++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc) by
+ calling the customed HAL_SMARTCARD_MspInit() API.
+
+ -@@- The specific SMARTCARD interrupts (Transmission complete interrupt,
+ RXNE interrupt and Error Interrupts) will be managed using the macros
+ __HAL_SMARTCARD_ENABLE_IT() and __HAL_SMARTCARD_DISABLE_IT() inside the transmit and receive process.
+
+ (#) Three operation modes are available within this driver :
+
+ *** Polling mode IO operation ***
+ =================================
+ [..]
+ (+) Send an amount of data in blocking mode using HAL_SMARTCARD_Transmit()
+ (+) Receive an amount of data in blocking mode using HAL_SMARTCARD_Receive()
+
+ *** Interrupt mode IO operation ***
+ ===================================
+ [..]
+ (+) Send an amount of data in non blocking mode using HAL_SMARTCARD_Transmit_IT()
+ (+) At transmission end of transfer HAL_SMARTCARD_TxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_SMARTCARD_TxCpltCallback
+ (+) Receive an amount of data in non blocking mode using HAL_SMARTCARD_Receive_IT()
+ (+) At reception end of transfer HAL_SMARTCARD_RxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_SMARTCARD_RxCpltCallback
+ (+) In case of transfer Error, HAL_SMARTCARD_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_SMARTCARD_ErrorCallback
+
+ *** DMA mode IO operation ***
+ ==============================
+ [..]
+ (+) Send an amount of data in non blocking mode (DMA) using HAL_SMARTCARD_Transmit_DMA()
+ (+) At transmission end of transfer HAL_SMARTCARD_TxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_SMARTCARD_TxCpltCallback
+ (+) Receive an amount of data in non blocking mode (DMA) using HAL_SMARTCARD_Receive_DMA()
+ (+) At reception end of transfer HAL_SMARTCARD_RxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_SMARTCARD_RxCpltCallback
+ (+) In case of transfer Error, HAL_SMARTCARD_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_SMARTCARD_ErrorCallback
+
+ *** SMARTCARD HAL driver macros list ***
+ ========================================
+ [..]
+ Below the list of most used macros in SMARTCARD HAL driver.
+
+ (+) __HAL_SMARTCARD_ENABLE: Enable the SMARTCARD peripheral
+ (+) __HAL_SMARTCARD_DISABLE: Disable the SMARTCARD peripheral
+ (+) __HAL_SMARTCARD_GET_FLAG : Check whether the specified SMARTCARD flag is set or not
+ (+) __HAL_SMARTCARD_CLEAR_FLAG : Clear the specified SMARTCARD pending flag
+ (+) __HAL_SMARTCARD_ENABLE_IT: Enable the specified SMARTCARD interrupt
+ (+) __HAL_SMARTCARD_DISABLE_IT: Disable the specified SMARTCARD interrupt
+
+ [..]
+ (@) You can refer to the SMARTCARD HAL driver header file for more useful macros
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup SMARTCARD SMARTCARD HAL module driver
+ * @brief HAL SMARTCARD module driver
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup SMARTCARD_Private_Constants SMARTCARD Private Constants
+ * @{
+ */
+#define TEACK_REACK_TIMEOUT 1000
+#define SMARTCARD_TXDMA_TIMEOUTVALUE 22000
+#define SMARTCARD_TIMEOUT_VALUE 22000
+#define USART_CR1_FIELDS ((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | \
+ USART_CR1_TE | USART_CR1_RE | USART_CR1_OVER8))
+#define USART_CR2_CLK_FIELDS ((uint32_t)(USART_CR2_CLKEN|USART_CR2_CPOL|USART_CR2_CPHA|USART_CR2_LBCL))
+#define USART_CR2_FIELDS ((uint32_t)(USART_CR2_RTOEN|USART_CR2_CLK_FIELDS|USART_CR2_STOP))
+#define USART_CR3_FIELDS ((uint32_t)(USART_CR3_ONEBIT|USART_CR3_NACK|USART_CR3_SCARCNT))
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup SMARTCARD_Private_Functions SMARTCARD Private Functions
+ * @{
+ */
+static void SMARTCARD_DMATransmitCplt(DMA_HandleTypeDef *hdma);
+static void SMARTCARD_DMAReceiveCplt(DMA_HandleTypeDef *hdma);
+static void SMARTCARD_DMAError(DMA_HandleTypeDef *hdma);
+static HAL_StatusTypeDef SMARTCARD_SetConfig(SMARTCARD_HandleTypeDef *hsmartcard);
+static HAL_StatusTypeDef SMARTCARD_WaitOnFlagUntilTimeout(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t Flag, FlagStatus Status, uint32_t Timeout);
+static HAL_StatusTypeDef SMARTCARD_CheckIdleState(SMARTCARD_HandleTypeDef *hsmartcard);
+static HAL_StatusTypeDef SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsmartcard);
+static HAL_StatusTypeDef SMARTCARD_EndTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard);
+static HAL_StatusTypeDef SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsmartcard);
+static void SMARTCARD_AdvFeatureConfig(SMARTCARD_HandleTypeDef *hsmartcard);
+/**
+ * @}
+ */
+
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup SMARTCARD_Exported_Functions SMARTCARD Exported Functions
+ * @{
+ */
+
+/** @defgroup SMARTCARD_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+===============================================================================
+ ##### Initialization and Configuration functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to initialize the USART
+ in Smartcard mode.
+ [..]
+ The Smartcard interface is designed to support asynchronous protocol Smartcards as
+ defined in the ISO 7816-3 standard.
+ [..]
+ The USART can provide a clock to the smartcard through the SCLK output.
+ In smartcard mode, SCLK is not associated to the communication but is simply derived
+ from the internal peripheral input clock through a 5-bit prescaler.
+ [..]
+ (+) For the Smartcard mode only these parameters can be configured:
+ (++) Baud Rate
+ (++) Parity: parity should be enabled,
+ Frame Length is fixed to 8 bits plus parity:
+ the USART frame format is given in the following table:
+ +---------------------------------------------------------------+
+ | M bit | PCE bit | USART frame |
+ |---------------------|-----------------------------------------|
+ | 1 | 1 | | SB | 8 bit data | PB | STB | |
+ +---------------------------------------------------------------+
+ or
+ +---------------------------------------------------------------+
+ | M1M0 bits | PCE bit | USART frame |
+ |-----------------------|---------------------------------------|
+ | 01 | 1 | | SB | 8 bit data | PB | STB | |
+ +---------------------------------------------------------------+
+
+ (++) Receiver/transmitter modes
+ (++) Synchronous mode (and if enabled, phase, polarity and last bit parameters)
+ (++) Prescaler value
+ (++) Guard bit time
+ (++) NACK enabling or disabling on transmission error
+
+ (+) The following advanced features can be configured as well:
+ (++) TX and/or RX pin level inversion
+ (++) data logical level inversion
+ (++) RX and TX pins swap
+ (++) RX overrun detection disabling
+ (++) DMA disabling on RX error
+ (++) MSB first on communication line
+ (++) Time out enabling (and if activated, timeout value)
+ (++) Block length
+ (++) Auto-retry counter
+
+ [..]
+ The HAL_SMARTCARD_Init() API follow respectively the USART (a)synchronous configuration procedures
+ (details for the procedures are available in reference manual).
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the SMARTCARD mode according to the specified
+ * parameters in the SMARTCARD_InitTypeDef and creates the associated handle .
+ * @param hsmartcard: SMARTCARD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsmartcard)
+{
+ /* Check the SMARTCARD handle allocation */
+ if(hsmartcard == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the USART associated to the SmartCard */
+ assert_param(IS_SMARTCARD_INSTANCE(hsmartcard->Instance));
+
+ if(hsmartcard->State == HAL_SMARTCARD_STATE_RESET)
+ {
+ /* Init the low level hardware : GPIO, CLOCK */
+ HAL_SMARTCARD_MspInit(hsmartcard);
+ }
+
+ hsmartcard->State = HAL_SMARTCARD_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_SMARTCARD_DISABLE(hsmartcard);
+
+ /* Set the SMARTCARD Communication parameters */
+ if (SMARTCARD_SetConfig(hsmartcard) == HAL_ERROR)
+ {
+ return HAL_ERROR;
+ }
+
+ if (hsmartcard->AdvancedInit.AdvFeatureInit != SMARTCARD_ADVFEATURE_NO_INIT)
+ {
+ SMARTCARD_AdvFeatureConfig(hsmartcard);
+ }
+
+ /* In SmartCard mode, the following bits must be kept cleared:
+ - LINEN in the USART_CR2 register,
+ - HDSEL and IREN bits in the USART_CR3 register.*/
+ hsmartcard->Instance->CR2 &= ~(USART_CR2_LINEN);
+ hsmartcard->Instance->CR3 &= ~(USART_CR3_HDSEL | USART_CR3_IREN);
+
+ /* set the USART in SMARTCARD mode */
+ hsmartcard->Instance->CR3 |= USART_CR3_SCEN;
+
+ /* Enable the Peripheral */
+ __HAL_SMARTCARD_ENABLE(hsmartcard);
+
+ /* TEACK and/or REACK to check before moving hsmartcard->State to Ready */
+ return (SMARTCARD_CheckIdleState(hsmartcard));
+}
+
+
+/**
+ * @brief DeInitializes the SMARTCARD peripheral
+ * @param hsmartcard: SMARTCARD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsmartcard)
+{
+ /* Check the SMARTCARD handle allocation */
+ if(hsmartcard == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_SMARTCARD_INSTANCE(hsmartcard->Instance));
+
+ hsmartcard->State = HAL_SMARTCARD_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_SMARTCARD_DISABLE(hsmartcard);
+
+ hsmartcard->Instance->CR1 = 0x0;
+ hsmartcard->Instance->CR2 = 0x0;
+ hsmartcard->Instance->CR3 = 0x0;
+ hsmartcard->Instance->RTOR = 0x0;
+ hsmartcard->Instance->GTPR = 0x0;
+
+ /* DeInit the low level hardware */
+ HAL_SMARTCARD_MspDeInit(hsmartcard);
+
+ hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+ hsmartcard->State = HAL_SMARTCARD_STATE_RESET;
+
+ /* Process Unlock */
+ __HAL_UNLOCK(hsmartcard);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief SMARTCARD MSP Init
+ * @param hsmartcard: SMARTCARD handle
+ * @retval None
+ */
+ __weak void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsmartcard)
+{
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SMARTCARD_MspInit can be implemented in the user file
+ */
+}
+
+/**
+ * @brief SMARTCARD MSP DeInit
+ * @param hsmartcard: SMARTCARD handle
+ * @retval None
+ */
+ __weak void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsmartcard)
+{
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SMARTCARD_MspDeInit can be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Exported_Functions_Group2 IO operation functions
+ * @brief SMARTCARD Transmit and Receive functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the SMARTCARD data transfers.
+
+ [..]
+ Smartcard is a single wire half duplex communication protocol.
+ The Smartcard interface is designed to support asynchronous protocol Smartcards as
+ defined in the ISO 7816-3 standard. The USART should be configured as:
+ - 8 bits plus parity: where M=1 and PCE=1 in the USART_CR1 register
+ - 1.5 stop bits when transmitting and receiving: where STOP=11 in the USART_CR2 register.
+
+ (#) There are two modes of transfer:
+ (++) Blocking mode: The communication is performed in polling mode.
+ The HAL status of all data processing is returned by the same function
+ after finishing transfer.
+ (++) No-Blocking mode: The communication is performed using Interrupts
+ or DMA, These API s return the HAL status.
+ The end of the data processing will be indicated through the
+ dedicated SMARTCARD IRQ when using Interrupt mode or the DMA IRQ when
+ using DMA mode.
+ The HAL_SMARTCARD_TxCpltCallback(), HAL_SMARTCARD_RxCpltCallback() user callbacks
+ will be executed respectivelly at the end of the transmit or Receive process
+ The HAL_SMARTCARD_ErrorCallback()user callback will be executed when a communication error is detected
+
+ (#) Blocking mode API s are :
+ (++) HAL_SMARTCARD_Transmit()
+ (++) HAL_SMARTCARD_Receive()
+
+ (#) Non Blocking mode API s with Interrupt are :
+ (++) HAL_SMARTCARD_Transmit_IT()
+ (++) HAL_SMARTCARD_Receive_IT()
+ (++) HAL_SMARTCARD_IRQHandler()
+
+ (#) Non Blocking mode functions with DMA are :
+ (++) HAL_SMARTCARD_Transmit_DMA()
+ (++) HAL_SMARTCARD_Receive_DMA()
+
+ (#) A set of Transfer Complete Callbacks are provided in non Blocking mode:
+ (++) HAL_SMARTCARD_TxCpltCallback()
+ (++) HAL_SMARTCARD_RxCpltCallback()
+ (++) HAL_SMARTCARD_ErrorCallback()
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Send an amount of data in blocking mode
+ * @param hsmartcard: SMARTCARD handle
+ * @param pData: pointer to data buffer
+ * @param Size: amount of data to be sent
+ * @param Timeout : Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ if ((hsmartcard->State == HAL_SMARTCARD_STATE_READY) || (hsmartcard->State == HAL_SMARTCARD_STATE_BUSY_RX))
+ {
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hsmartcard);
+ hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+ /* Check if a non-blocking receive process is ongoing or not */
+ if(hsmartcard->State == HAL_SMARTCARD_STATE_BUSY_RX)
+ {
+ hsmartcard->State = HAL_SMARTCARD_STATE_BUSY_TX_RX;
+ }
+ else
+ {
+ hsmartcard->State = HAL_SMARTCARD_STATE_BUSY_TX;
+ }
+
+ hsmartcard->TxXferSize = Size;
+ hsmartcard->TxXferCount = Size;
+ while(hsmartcard->TxXferCount > 0)
+ {
+ hsmartcard->TxXferCount--;
+ if(SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, SMARTCARD_FLAG_TXE, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ hsmartcard->Instance->TDR = (*pData++ & (uint8_t)0xFF);
+ }
+ if(SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, SMARTCARD_FLAG_TC, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ /* Check if a non-blocking receive Process is ongoing or not */
+ if(hsmartcard->State == HAL_SMARTCARD_STATE_BUSY_TX_RX)
+ {
+ hsmartcard->State = HAL_SMARTCARD_STATE_BUSY_RX;
+ }
+ else
+ {
+ hsmartcard->State = HAL_SMARTCARD_STATE_READY;
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsmartcard);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data in blocking mode
+ * @param hsmartcard: SMARTCARD handle
+ * @param pData: pointer to data buffer
+ * @param Size: amount of data to be received
+ * @param Timeout : Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ if ((hsmartcard->State == HAL_SMARTCARD_STATE_READY) || (hsmartcard->State == HAL_SMARTCARD_STATE_BUSY_TX))
+ {
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hsmartcard);
+
+ hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+ /* Check if a non-blocking transmit process is ongoing or not */
+ if(hsmartcard->State == HAL_SMARTCARD_STATE_BUSY_TX)
+ {
+ hsmartcard->State = HAL_SMARTCARD_STATE_BUSY_TX_RX;
+ }
+ else
+ {
+ hsmartcard->State = HAL_SMARTCARD_STATE_BUSY_RX;
+ }
+
+ hsmartcard->RxXferSize = Size;
+ hsmartcard->RxXferCount = Size;
+ /* Check the remain data to be received */
+ while(hsmartcard->RxXferCount > 0)
+ {
+ hsmartcard->RxXferCount--;
+ if(SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, SMARTCARD_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ *pData++ = (uint8_t)(hsmartcard->Instance->RDR & (uint8_t)0x00FF);
+ }
+
+ /* Check if a non-blocking transmit Process is ongoing or not */
+ if(hsmartcard->State == HAL_SMARTCARD_STATE_BUSY_TX_RX)
+ {
+ hsmartcard->State = HAL_SMARTCARD_STATE_BUSY_TX;
+ }
+ else
+ {
+ hsmartcard->State = HAL_SMARTCARD_STATE_READY;
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsmartcard);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Send an amount of data in interrupt mode
+ * @param hsmartcard: SMARTCARD handle
+ * @param pData: pointer to data buffer
+ * @param Size: amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size)
+{
+ if ((hsmartcard->State == HAL_SMARTCARD_STATE_READY) || (hsmartcard->State == HAL_SMARTCARD_STATE_BUSY_RX))
+ {
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hsmartcard);
+
+ hsmartcard->pTxBuffPtr = pData;
+ hsmartcard->TxXferSize = Size;
+ hsmartcard->TxXferCount = Size;
+
+ hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+ /* Check if a receive process is ongoing or not */
+ if(hsmartcard->State == HAL_SMARTCARD_STATE_BUSY_RX)
+ {
+ hsmartcard->State = HAL_SMARTCARD_STATE_BUSY_TX_RX;
+ }
+ else
+ {
+ hsmartcard->State = HAL_SMARTCARD_STATE_BUSY_TX;
+ }
+
+ /* Enable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
+ __HAL_SMARTCARD_ENABLE_IT(hsmartcard, SMARTCARD_IT_ERR);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsmartcard);
+
+ /* Enable the SMARTCARD Transmit Data Register Empty Interrupt */
+ __HAL_SMARTCARD_ENABLE_IT(hsmartcard, SMARTCARD_IT_TXE);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data in interrupt mode
+ * @param hsmartcard: SMARTCARD handle
+ * @param pData: pointer to data buffer
+ * @param Size: amount of data to be received
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size)
+{
+ if ((hsmartcard->State == HAL_SMARTCARD_STATE_READY) || (hsmartcard->State == HAL_SMARTCARD_STATE_BUSY_TX))
+ {
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hsmartcard);
+
+ hsmartcard->pRxBuffPtr = pData;
+ hsmartcard->RxXferSize = Size;
+ hsmartcard->RxXferCount = Size;
+
+ hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+ /* Check if a transmit process is ongoing or not */
+ if(hsmartcard->State == HAL_SMARTCARD_STATE_BUSY_TX)
+ {
+ hsmartcard->State = HAL_SMARTCARD_STATE_BUSY_TX_RX;
+ }
+ else
+ {
+ hsmartcard->State = HAL_SMARTCARD_STATE_BUSY_RX;
+ }
+
+ /* Enable the SMARTCARD Parity Error Interrupt */
+ __HAL_SMARTCARD_ENABLE_IT(hsmartcard, SMARTCARD_IT_PE);
+
+ /* Enable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
+ __HAL_SMARTCARD_ENABLE_IT(hsmartcard, SMARTCARD_IT_ERR);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsmartcard);
+
+ /* Enable the SMARTCARD Data Register not empty Interrupt */
+ __HAL_SMARTCARD_ENABLE_IT(hsmartcard, SMARTCARD_IT_RXNE);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Send an amount of data in DMA mode
+ * @param hsmartcard: SMARTCARD handle
+ * @param pData: pointer to data buffer
+ * @param Size: amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size)
+{
+ uint32_t *tmp;
+
+ if ((hsmartcard->State == HAL_SMARTCARD_STATE_READY) || (hsmartcard->State == HAL_SMARTCARD_STATE_BUSY_RX))
+ {
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hsmartcard);
+
+ hsmartcard->pTxBuffPtr = pData;
+ hsmartcard->TxXferSize = Size;
+ hsmartcard->TxXferCount = Size;
+
+ hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+ /* Check if a receive process is ongoing or not */
+ if(hsmartcard->State == HAL_SMARTCARD_STATE_BUSY_RX)
+ {
+ hsmartcard->State = HAL_SMARTCARD_STATE_BUSY_TX_RX;
+ }
+ else
+ {
+ hsmartcard->State = HAL_SMARTCARD_STATE_BUSY_TX;
+ }
+
+ /* Set the SMARTCARD DMA transfer complete callback */
+ hsmartcard->hdmatx->XferCpltCallback = SMARTCARD_DMATransmitCplt;
+
+ /* Set the SMARTCARD error callback */
+ hsmartcard->hdmatx->XferErrorCallback = SMARTCARD_DMAError;
+
+ /* Enable the SMARTCARD transmit DMA channel */
+ tmp = (uint32_t*)&pData;
+ HAL_DMA_Start_IT(hsmartcard->hdmatx, *(uint32_t*)tmp, (uint32_t)&hsmartcard->Instance->TDR, Size);
+
+ /* Enable the DMA transfer for transmit request by setting the DMAT bit
+ in the SMARTCARD associated USART CR3 register */
+ hsmartcard->Instance->CR3 |= USART_CR3_DMAT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsmartcard);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data in DMA mode
+ * @param hsmartcard: SMARTCARD handle
+ * @param pData: pointer to data buffer
+ * @param Size: amount of data to be received
+ * @note The SMARTCARD-associated USART parity is enabled (PCE = 1),
+ * the received data contain the parity bit (MSB position)
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size)
+{
+ uint32_t *tmp;
+
+ if ((hsmartcard->State == HAL_SMARTCARD_STATE_READY) || (hsmartcard->State == HAL_SMARTCARD_STATE_BUSY_TX))
+ {
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hsmartcard);
+
+ hsmartcard->pRxBuffPtr = pData;
+ hsmartcard->RxXferSize = Size;
+
+ hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+ /* Check if a transmit rocess is ongoing or not */
+ if(hsmartcard->State == HAL_SMARTCARD_STATE_BUSY_TX)
+ {
+ hsmartcard->State = HAL_SMARTCARD_STATE_BUSY_TX_RX;
+ }
+ else
+ {
+ hsmartcard->State = HAL_SMARTCARD_STATE_BUSY_RX;
+ }
+
+ /* Set the SMARTCARD DMA transfer complete callback */
+ hsmartcard->hdmarx->XferCpltCallback = SMARTCARD_DMAReceiveCplt;
+
+ /* Set the SMARTCARD DMA error callback */
+ hsmartcard->hdmarx->XferErrorCallback = SMARTCARD_DMAError;
+
+ /* Enable the DMA channel */
+ tmp = (uint32_t*)&pData;
+ HAL_DMA_Start_IT(hsmartcard->hdmarx, (uint32_t)&hsmartcard->Instance->RDR, *(uint32_t*)tmp, Size);
+
+ /* Enable the DMA transfer for the receiver request by setting the DMAR bit
+ in the SMARTCARD associated USART CR3 register */
+ hsmartcard->Instance->CR3 |= USART_CR3_DMAR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsmartcard);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief SMARTCARD interrupt requests handling.
+ * @param hsmartcard: SMARTCARD handle
+ * @retval None
+ */
+void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsmartcard)
+{
+ /* SMARTCARD parity error interrupt occurred -------------------------------------*/
+ if((__HAL_SMARTCARD_GET_IT(hsmartcard, SMARTCARD_IT_PE) != RESET) && (__HAL_SMARTCARD_GET_IT_SOURCE(hsmartcard, SMARTCARD_IT_PE) != RESET))
+ {
+ __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_PEF);
+ hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_PE;
+ /* Set the SMARTCARD state ready to be able to start again the process */
+ hsmartcard->State = HAL_SMARTCARD_STATE_READY;
+ }
+
+ /* SMARTCARD frame error interrupt occured --------------------------------------*/
+ if((__HAL_SMARTCARD_GET_IT(hsmartcard, SMARTCARD_IT_FE) != RESET) && (__HAL_SMARTCARD_GET_IT_SOURCE(hsmartcard, SMARTCARD_IT_ERR) != RESET))
+ {
+ __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_FEF);
+ hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_FE;
+ /* Set the SMARTCARD state ready to be able to start again the process */
+ hsmartcard->State = HAL_SMARTCARD_STATE_READY;
+ }
+
+ /* SMARTCARD noise error interrupt occured --------------------------------------*/
+ if((__HAL_SMARTCARD_GET_IT(hsmartcard, SMARTCARD_IT_NE) != RESET) && (__HAL_SMARTCARD_GET_IT_SOURCE(hsmartcard, SMARTCARD_IT_ERR) != RESET))
+ {
+ __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_NEF);
+ hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_NE;
+ /* Set the SMARTCARD state ready to be able to start again the process */
+ hsmartcard->State = HAL_SMARTCARD_STATE_READY;
+ }
+
+ /* SMARTCARD Over-Run interrupt occured -----------------------------------------*/
+ if((__HAL_SMARTCARD_GET_IT(hsmartcard, SMARTCARD_IT_ORE) != RESET) && (__HAL_SMARTCARD_GET_IT_SOURCE(hsmartcard, SMARTCARD_IT_ERR) != RESET))
+ {
+ __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_OREF);
+ hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_ORE;
+ /* Set the SMARTCARD state ready to be able to start again the process */
+ hsmartcard->State = HAL_SMARTCARD_STATE_READY;
+ }
+
+ /* SMARTCARD receiver timeout interrupt occured -----------------------------------------*/
+ if((__HAL_SMARTCARD_GET_IT(hsmartcard, SMARTCARD_IT_RTO) != RESET) && (__HAL_SMARTCARD_GET_IT_SOURCE(hsmartcard, SMARTCARD_IT_RTO) != RESET))
+ {
+ __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_RTOF);
+ hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_RTO;
+ /* Set the SMARTCARD state ready to be able to start again the process */
+ hsmartcard->State = HAL_SMARTCARD_STATE_READY;
+ }
+
+ /* Call SMARTCARD Error Call back function if need be --------------------------*/
+ if(hsmartcard->ErrorCode != HAL_SMARTCARD_ERROR_NONE)
+ {
+ HAL_SMARTCARD_ErrorCallback(hsmartcard);
+ }
+
+ /* SMARTCARD in mode Receiver ---------------------------------------------------*/
+ if((__HAL_SMARTCARD_GET_IT(hsmartcard, SMARTCARD_IT_RXNE) != RESET) && (__HAL_SMARTCARD_GET_IT_SOURCE(hsmartcard, SMARTCARD_IT_RXNE) != RESET))
+ {
+ SMARTCARD_Receive_IT(hsmartcard);
+ /* Clear RXNE interrupt flag */
+ __HAL_SMARTCARD_SEND_REQ(hsmartcard, SMARTCARD_RXDATA_FLUSH_REQUEST);
+ }
+
+ /* SMARTCARD in mode Receiver, end of block interruption ------------------------*/
+ if((__HAL_SMARTCARD_GET_IT(hsmartcard, SMARTCARD_IT_EOB) != RESET) && (__HAL_SMARTCARD_GET_IT_SOURCE(hsmartcard, SMARTCARD_IT_EOB) != RESET))
+ {
+ hsmartcard->State = HAL_SMARTCARD_STATE_READY;
+ __HAL_UNLOCK(hsmartcard);
+ HAL_SMARTCARD_RxCpltCallback(hsmartcard);
+ /* Clear EOBF interrupt after HAL_SMARTCARD_RxCpltCallback() call for the End of Block information
+ * to be available during HAL_SMARTCARD_RxCpltCallback() processing */
+ __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_EOBF);
+ }
+
+ /* SMARTCARD in mode Transmitter ------------------------------------------------*/
+ if((__HAL_SMARTCARD_GET_IT(hsmartcard, SMARTCARD_IT_TXE) != RESET) &&(__HAL_SMARTCARD_GET_IT_SOURCE(hsmartcard, SMARTCARD_IT_TXE) != RESET))
+ {
+ SMARTCARD_Transmit_IT(hsmartcard);
+ }
+
+ /* SMARTCARD in mode Transmitter (transmission end) ------------------------*/
+ if((__HAL_SMARTCARD_GET_IT(hsmartcard, SMARTCARD_IT_TC) != RESET) &&(__HAL_SMARTCARD_GET_IT_SOURCE(hsmartcard, SMARTCARD_IT_TC) != RESET))
+ {
+ SMARTCARD_EndTransmit_IT(hsmartcard);
+ }
+}
+
+/**
+ * @brief Tx Transfer completed callbacks
+ * @param hsmartcard: SMARTCARD handle
+ * @retval None
+ */
+ __weak void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard)
+{
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SMARTCARD_TxCpltCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Transfer completed callbacks
+ * @param hsmartcard: SMARTCARD handle
+ * @retval None
+ */
+__weak void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard)
+{
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SMARTCARD_TxCpltCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief SMARTCARD error callbacks
+ * @param hsmartcard: SMARTCARD handle
+ * @retval None
+ */
+ __weak void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsmartcard)
+{
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SMARTCARD_ErrorCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Exported_Functions_Group3 Peripheral State and Errors functions
+ * @brief SMARTCARD State and Errors functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral State and Errors functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to return the State of SmartCard
+ communication process and also return Peripheral Errors occurred during communication process
+ (+) HAL_SMARTCARD_GetState() API can be helpful to check in run-time the state of the SMARTCARD peripheral
+ (+) HAL_SMARTCARD_GetError() check in run-time errors that could be occurred during
+ communication.
+
+ (+) SMARTCARD_SetConfig() API configures the SMARTCARD peripheral
+ (+) SMARTCARD_AdvFeatureConfig() API optionally configures the SMARTCARD advanced features
+ (+) SMARTCARD_CheckIdleState() API ensures that TEACK and/or REACK are set after initialization
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief return the SMARTCARD state
+ * @param hsmartcard: SMARTCARD handle
+ * @retval HAL state
+ */
+HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsmartcard)
+{
+ return hsmartcard->State;
+}
+
+/**
+* @brief Return the SMARTCARD error code
+* @param hsmartcard : pointer to a SMARTCARD_HandleTypeDef structure that contains
+ * the configuration information for the specified SMARTCARD.
+* @retval SMARTCARD Error Code
+*/
+uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsmartcard)
+{
+ return hsmartcard->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Private_Functions SMARTCARD Private Functions
+ * @{
+ */
+
+/**
+ * @brief This function handles SMARTCARD Communication Timeout.
+ * @param hsmartcard: SMARTCARD handle
+ * @param Flag: specifies the SMARTCARD flag to check.
+ * @param Status: The new Flag status (SET or RESET).
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef SMARTCARD_WaitOnFlagUntilTimeout(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t Flag, FlagStatus Status, uint32_t Timeout)
+{
+ uint32_t tickstart = HAL_GetTick();
+
+ /* Wait until flag is set */
+ if(Status == RESET)
+ {
+ while(__HAL_SMARTCARD_GET_FLAG(hsmartcard, Flag) == RESET)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0) || ((HAL_GetTick() - tickstart) > Timeout))
+ {
+ /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
+ __HAL_SMARTCARD_DISABLE_IT(hsmartcard, SMARTCARD_IT_TXE);
+ __HAL_SMARTCARD_DISABLE_IT(hsmartcard, SMARTCARD_IT_RXNE);
+ __HAL_SMARTCARD_DISABLE_IT(hsmartcard, SMARTCARD_IT_PE);
+ __HAL_SMARTCARD_DISABLE_IT(hsmartcard, SMARTCARD_IT_ERR);
+
+ hsmartcard->State= HAL_SMARTCARD_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsmartcard);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ else
+ {
+ while(__HAL_SMARTCARD_GET_FLAG(hsmartcard, Flag) != RESET)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0) || ((HAL_GetTick() - tickstart) > Timeout))
+ {
+ /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
+ __HAL_SMARTCARD_DISABLE_IT(hsmartcard, SMARTCARD_IT_TXE);
+ __HAL_SMARTCARD_DISABLE_IT(hsmartcard, SMARTCARD_IT_RXNE);
+ __HAL_SMARTCARD_DISABLE_IT(hsmartcard, SMARTCARD_IT_PE);
+ __HAL_SMARTCARD_DISABLE_IT(hsmartcard, SMARTCARD_IT_ERR);
+
+ hsmartcard->State= HAL_SMARTCARD_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsmartcard);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief DMA SMARTCARD transmit process complete callback.
+ * @param hdma: Pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SMARTCARD_DMATransmitCplt(DMA_HandleTypeDef *hdma)
+{
+ SMARTCARD_HandleTypeDef* hsmartcard = ( SMARTCARD_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ hsmartcard->TxXferCount = 0;
+
+ /* Disable the DMA transfer for transmit request by resetting the DMAT bit
+ in the SMARTCARD associated USART CR3 register */
+ hsmartcard->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_DMAT);
+
+ /* Enable the SMARTCARD Transmit Complete Interrupt */
+ __HAL_SMARTCARD_ENABLE_IT(hsmartcard, SMARTCARD_IT_TC);
+}
+
+/**
+ * @brief DMA SMARTCARD receive process complete callback.
+ * @param hdma: Pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SMARTCARD_DMAReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+ SMARTCARD_HandleTypeDef* hsmartcard = ( SMARTCARD_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ hsmartcard->RxXferCount = 0;
+
+ /* Disable the DMA transfer for the receiver request by resetting the DMAR bit
+ in the SMARTCARD associated USART CR3 register */
+ hsmartcard->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_DMAR);
+
+ /* Check if a transmit Process is ongoing or not */
+ if(hsmartcard->State == HAL_SMARTCARD_STATE_BUSY_TX_RX)
+ {
+ hsmartcard->State = HAL_SMARTCARD_STATE_BUSY_TX;
+ }
+ else
+ {
+ hsmartcard->State = HAL_SMARTCARD_STATE_READY;
+ }
+
+ HAL_SMARTCARD_RxCpltCallback(hsmartcard);
+}
+
+/**
+ * @brief DMA SMARTCARD communication error callback.
+ * @param hdma: Pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SMARTCARD_DMAError(DMA_HandleTypeDef *hdma)
+{
+ SMARTCARD_HandleTypeDef* hsmartcard = ( SMARTCARD_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ hsmartcard->RxXferCount = 0;
+ hsmartcard->TxXferCount = 0;
+ hsmartcard->State= HAL_SMARTCARD_STATE_READY;
+ hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_DMA;
+ HAL_SMARTCARD_ErrorCallback(hsmartcard);
+}
+
+/**
+ * @brief Send an amount of data in non blocking mode
+ * @param hsmartcard: SMARTCARD handle.
+ * Function called under interruption only, once
+ * interruptions have been enabled by HAL_SMARTCARD_Transmit_IT()
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsmartcard)
+{
+ if ((hsmartcard->State == HAL_SMARTCARD_STATE_BUSY_TX) || (hsmartcard->State == HAL_SMARTCARD_STATE_BUSY_TX_RX))
+ {
+
+ if(hsmartcard->TxXferCount == 0)
+ {
+ /* Disable the SMARTCARD Transmit Data Register Empty Interrupt */
+ __HAL_SMARTCARD_DISABLE_IT(hsmartcard, SMARTCARD_IT_TXE);
+
+ /* Enable the SMARTCARD Transmit Complete Interrupt */
+ __HAL_SMARTCARD_ENABLE_IT(hsmartcard, SMARTCARD_IT_TC);
+
+ return HAL_OK;
+ }
+ else
+ {
+ hsmartcard->Instance->TDR = (*hsmartcard->pTxBuffPtr++ & (uint8_t)0xFF);
+ hsmartcard->TxXferCount--;
+
+ return HAL_OK;
+ }
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+
+/**
+ * @brief Wraps up transmission in non blocking mode.
+ * @param hsmartcard: pointer to a SMARTCARD_HandleTypeDef structure that contains
+ * the configuration information for the specified SMARTCARD module.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef SMARTCARD_EndTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard)
+{
+ /* Disable the SMARTCARD Transmit Complete Interrupt */
+ __HAL_SMARTCARD_DISABLE_IT(hsmartcard, SMARTCARD_IT_TC);
+
+ /* Check if a receive process is ongoing or not */
+ if(hsmartcard->State == HAL_SMARTCARD_STATE_BUSY_TX_RX)
+ {
+ hsmartcard->State = HAL_SMARTCARD_STATE_BUSY_RX;
+ }
+ else
+ {
+ /* Disable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
+ __HAL_SMARTCARD_DISABLE_IT(hsmartcard, SMARTCARD_IT_ERR);
+
+ hsmartcard->State = HAL_SMARTCARD_STATE_READY;
+ }
+
+ HAL_SMARTCARD_TxCpltCallback(hsmartcard);
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Receive an amount of data in non blocking mode
+ * @param hsmartcard: SMARTCARD handle.
+ * Function called under interruption only, once
+ * interruptions have been enabled by HAL_SMARTCARD_Receive_IT()
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsmartcard)
+{
+ if ((hsmartcard->State == HAL_SMARTCARD_STATE_BUSY_RX) || (hsmartcard->State == HAL_SMARTCARD_STATE_BUSY_TX_RX))
+ {
+
+ *hsmartcard->pRxBuffPtr++ = (uint8_t)(hsmartcard->Instance->RDR & (uint8_t)0xFF);
+
+ if(--hsmartcard->RxXferCount == 0)
+ {
+ __HAL_SMARTCARD_DISABLE_IT(hsmartcard, SMARTCARD_IT_RXNE);
+
+ /* Check if a transmit Process is ongoing or not */
+ if(hsmartcard->State == HAL_SMARTCARD_STATE_BUSY_TX_RX)
+ {
+ hsmartcard->State = HAL_SMARTCARD_STATE_BUSY_TX;
+ }
+ else
+ {
+ /* Disable the SMARTCARD Parity Error Interrupt */
+ __HAL_SMARTCARD_DISABLE_IT(hsmartcard, SMARTCARD_IT_PE);
+
+ /* Disable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
+ __HAL_SMARTCARD_DISABLE_IT(hsmartcard, SMARTCARD_IT_ERR);
+
+ hsmartcard->State = HAL_SMARTCARD_STATE_READY;
+ }
+
+ HAL_SMARTCARD_RxCpltCallback(hsmartcard);
+
+ return HAL_OK;
+ }
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Configure the SMARTCARD associated USART peripheral
+ * @param hsmartcard: SMARTCARD handle
+ * @retval None
+ */
+static HAL_StatusTypeDef SMARTCARD_SetConfig(SMARTCARD_HandleTypeDef *hsmartcard)
+{
+ uint32_t tmpreg = 0x00000000;
+ SMARTCARD_ClockSourceTypeDef clocksource = SMARTCARD_CLOCKSOURCE_UNDEFINED;
+ HAL_StatusTypeDef ret = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_SMARTCARD_INSTANCE(hsmartcard->Instance));
+ assert_param(IS_SMARTCARD_BAUDRATE(hsmartcard->Init.BaudRate));
+ assert_param(IS_SMARTCARD_WORD_LENGTH(hsmartcard->Init.WordLength));
+ assert_param(IS_SMARTCARD_STOPBITS(hsmartcard->Init.StopBits));
+ assert_param(IS_SMARTCARD_PARITY(hsmartcard->Init.Parity));
+ assert_param(IS_SMARTCARD_MODE(hsmartcard->Init.Mode));
+ assert_param(IS_SMARTCARD_POLARITY(hsmartcard->Init.CLKPolarity));
+ assert_param(IS_SMARTCARD_PHASE(hsmartcard->Init.CLKPhase));
+ assert_param(IS_SMARTCARD_LASTBIT(hsmartcard->Init.CLKLastBit));
+ assert_param(IS_SMARTCARD_ONEBIT_SAMPLING(hsmartcard->Init.OneBitSampling));
+ assert_param(IS_SMARTCARD_NACK(hsmartcard->Init.NACKEnable));
+ assert_param(IS_SMARTCARD_TIMEOUT(hsmartcard->Init.TimeOutEnable));
+ assert_param(IS_SMARTCARD_AUTORETRY_COUNT(hsmartcard->Init.AutoRetryCount));
+
+ /*-------------------------- USART CR1 Configuration -----------------------*/
+ /* In SmartCard mode, M and PCE are forced to 1 (8 bits + parity).
+ * Oversampling is forced to 16 (OVER8 = 0).
+ * Configure the Parity and Mode:
+ * set PS bit according to hsmartcard->Init.Parity value
+ * set TE and RE bits according to hsmartcard->Init.Mode value */
+ tmpreg = (uint32_t) hsmartcard->Init.Parity | hsmartcard->Init.Mode;
+ /* in case of TX-only mode, if NACK is enabled, the USART must be able to monitor
+ the bidirectional line to detect a NACK signal in case of parity error.
+ Therefore, the receiver block must be enabled as well (RE bit must be set). */
+ if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX)
+ && (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLED))
+ {
+ tmpreg |= USART_CR1_RE;
+ }
+ tmpreg |= (uint32_t) hsmartcard->Init.WordLength;
+ MODIFY_REG(hsmartcard->Instance->CR1, USART_CR1_FIELDS, tmpreg);
+
+ /*-------------------------- USART CR2 Configuration -----------------------*/
+ /* Stop bits are forced to 1.5 (STOP = 11) */
+ tmpreg = hsmartcard->Init.StopBits;
+ /* Synchronous mode is activated by default */
+ tmpreg |= (uint32_t) USART_CR2_CLKEN | hsmartcard->Init.CLKPolarity;
+ tmpreg |= (uint32_t) hsmartcard->Init.CLKPhase | hsmartcard->Init.CLKLastBit;
+ tmpreg |= (uint32_t) hsmartcard->Init.TimeOutEnable;
+ MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_FIELDS, tmpreg);
+
+ /*-------------------------- USART CR3 Configuration -----------------------*/
+ /* Configure
+ * - one-bit sampling method versus three samples' majority rule
+ * according to hsmartcard->Init.OneBitSampling
+ * - NACK transmission in case of parity error according
+ * to hsmartcard->Init.NACKEnable
+ * - autoretry counter according to hsmartcard->Init.AutoRetryCount */
+ tmpreg = (uint32_t) hsmartcard->Init.OneBitSampling | hsmartcard->Init.NACKEnable;
+ tmpreg |= ((uint32_t)hsmartcard->Init.AutoRetryCount << SMARTCARD_CR3_SCARCNT_LSB_POS);
+ MODIFY_REG(hsmartcard->Instance-> CR3,USART_CR3_FIELDS, tmpreg);
+
+ /*-------------------------- USART GTPR Configuration ----------------------*/
+ tmpreg = (hsmartcard->Init.Prescaler | ((uint32_t)hsmartcard->Init.GuardTime << SMARTCARD_GTPR_GT_LSB_POS));
+ MODIFY_REG(hsmartcard->Instance->GTPR, (USART_GTPR_GT|USART_GTPR_PSC), tmpreg);
+
+ /*-------------------------- USART RTOR Configuration ----------------------*/
+ tmpreg = ((uint32_t)hsmartcard->Init.BlockLength << SMARTCARD_RTOR_BLEN_LSB_POS);
+ if (hsmartcard->Init.TimeOutEnable == SMARTCARD_TIMEOUT_ENABLED)
+ {
+ assert_param(IS_SMARTCARD_TIMEOUT_VALUE(hsmartcard->Init.TimeOutValue));
+ tmpreg |= (uint32_t) hsmartcard->Init.TimeOutValue;
+ }
+ MODIFY_REG(hsmartcard->Instance->RTOR, (USART_RTOR_RTO|USART_RTOR_BLEN), tmpreg);
+
+ /*-------------------------- USART BRR Configuration -----------------------*/
+ __HAL_SMARTCARD_GETCLOCKSOURCE(hsmartcard, clocksource);
+ switch (clocksource)
+ {
+ case SMARTCARD_CLOCKSOURCE_PCLK1:
+ hsmartcard->Instance->BRR = (uint16_t)(HAL_RCC_GetPCLK1Freq() / hsmartcard->Init.BaudRate);
+ break;
+ case SMARTCARD_CLOCKSOURCE_HSI:
+ hsmartcard->Instance->BRR = (uint16_t)(HSI_VALUE / hsmartcard->Init.BaudRate);
+ break;
+ case SMARTCARD_CLOCKSOURCE_SYSCLK:
+ hsmartcard->Instance->BRR = (uint16_t)(HAL_RCC_GetSysClockFreq() / hsmartcard->Init.BaudRate);
+ break;
+ case SMARTCARD_CLOCKSOURCE_LSE:
+ hsmartcard->Instance->BRR = (uint16_t)(LSE_VALUE / hsmartcard->Init.BaudRate);
+ break;
+ case SMARTCARD_CLOCKSOURCE_UNDEFINED:
+ default:
+ ret = HAL_ERROR;
+ break;
+ }
+
+ return ret;
+}
+
+/**
+ * @brief Check the SMARTCARD Idle State
+ * @param hsmartcard: SMARTCARD handle
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef SMARTCARD_CheckIdleState(SMARTCARD_HandleTypeDef *hsmartcard)
+{
+
+ /* Initialize the SMARTCARD ErrorCode */
+ hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+
+ /* Check if the Transmitter is enabled */
+ if((hsmartcard->Instance->CR1 & USART_CR1_TE) == USART_CR1_TE)
+ {
+ /* Wait until TEACK flag is set */
+ if(SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, USART_ISR_TEACK, RESET, TEACK_REACK_TIMEOUT) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ /* Check if the Receiver is enabled */
+ if((hsmartcard->Instance->CR1 & USART_CR1_RE) == USART_CR1_RE)
+ {
+ /* Wait until REACK flag is set */
+ if(SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, USART_ISR_REACK, RESET, TEACK_REACK_TIMEOUT) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Initialize the SMARTCARD state*/
+ hsmartcard->State= HAL_SMARTCARD_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsmartcard);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configure the SMARTCARD associated USART peripheral advanced feautures
+ * @param hsmartcard: SMARTCARD handle
+ * @retval None
+ */
+static void SMARTCARD_AdvFeatureConfig(SMARTCARD_HandleTypeDef *hsmartcard)
+{
+ /* Check whether the set of advanced features to configure is properly set */
+ assert_param(IS_SMARTCARD_ADVFEATURE_INIT(hsmartcard->AdvancedInit.AdvFeatureInit));
+
+ /* if required, configure TX pin active level inversion */
+ if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_TXINVERT_INIT))
+ {
+ assert_param(IS_SMARTCARD_ADVFEATURE_TXINV(hsmartcard->AdvancedInit.TxPinLevelInvert));
+ MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_TXINV, hsmartcard->AdvancedInit.TxPinLevelInvert);
+ }
+
+ /* if required, configure RX pin active level inversion */
+ if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_RXINVERT_INIT))
+ {
+ assert_param(IS_SMARTCARD_ADVFEATURE_RXINV(hsmartcard->AdvancedInit.RxPinLevelInvert));
+ MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_RXINV, hsmartcard->AdvancedInit.RxPinLevelInvert);
+ }
+
+ /* if required, configure data inversion */
+ if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_DATAINVERT_INIT))
+ {
+ assert_param(IS_SMARTCARD_ADVFEATURE_DATAINV(hsmartcard->AdvancedInit.DataInvert));
+ MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_DATAINV, hsmartcard->AdvancedInit.DataInvert);
+ }
+
+ /* if required, configure RX/TX pins swap */
+ if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_SWAP_INIT))
+ {
+ assert_param(IS_SMARTCARD_ADVFEATURE_SWAP(hsmartcard->AdvancedInit.Swap));
+ MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_SWAP, hsmartcard->AdvancedInit.Swap);
+ }
+
+ /* if required, configure RX overrun detection disabling */
+ if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT))
+ {
+ assert_param(IS_SMARTCARD_OVERRUN(hsmartcard->AdvancedInit.OverrunDisable));
+ MODIFY_REG(hsmartcard->Instance->CR3, USART_CR3_OVRDIS, hsmartcard->AdvancedInit.OverrunDisable);
+ }
+
+ /* if required, configure DMA disabling on reception error */
+ if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT))
+ {
+ assert_param(IS_SMARTCARD_ADVFEATURE_DMAONRXERROR(hsmartcard->AdvancedInit.DMADisableonRxError));
+ MODIFY_REG(hsmartcard->Instance->CR3, USART_CR3_DDRE, hsmartcard->AdvancedInit.DMADisableonRxError);
+ }
+
+ /* if required, configure MSB first on communication line */
+ if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_MSBFIRST_INIT))
+ {
+ assert_param(IS_SMARTCARD_ADVFEATURE_MSBFIRST(hsmartcard->AdvancedInit.MSBFirst));
+ MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_MSBFIRST, hsmartcard->AdvancedInit.MSBFirst);
+ }
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
+
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/src/stm32f0xx_hal_smartcard_ex.c b/f0/src/stm32f0xx_hal_smartcard_ex.c
new file mode 100755
index 0000000000000000000000000000000000000000..fe521c658f68da8ac021cf76ff878cd913b09db5
--- /dev/null
+++ b/f0/src/stm32f0xx_hal_smartcard_ex.c
@@ -0,0 +1,197 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_smartcard_ex.c
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief SMARTCARD HAL module driver.
+ *
+ * This file provides extended firmware functions to manage the following
+ * functionalities of the SmartCard.
+ * + Initialization and de-initialization function
+ * + Peripheral Control function
+ *
+ *
+ @verbatim
+ ===============================================================================
+ ##### How to use this driver #####
+ ===============================================================================
+ [..]
+ The Extended SMARTCARD HAL driver can be used as follows:
+
+
+ (#) After having configured the SMARTCARD basic features with HAL_SMARTCARD_Init(),
+ then if required, program SMARTCARD advanced features (TX/RX pins swap, TimeOut,
+ auto-retry counter,...) in the hsmartcard AdvancedInit structure.
+
+
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup SMARTCARDEx SMARTCARD Extended HAL module driver
+ * @brief SMARTCARD Extended HAL module driver
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup SMARTCARDEx_Exported_Functions SMARTCARDEx Exported Functions
+ * @{
+ */
+
+/** @defgroup SMARTCARDEx_Exported_Functions_Group1 Extended Peripheral Control functions
+ * @brief Extended control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to initialize the SMARTCARD.
+ (+) HAL_SMARTCARDEx_BlockLength_Config() API allows to configure the Block Length on the fly
+ (+) HAL_SMARTCARDEx_TimeOut_Config() API allows to configure the receiver timeout value on the fly
+ (+) HAL_SMARTCARDEx_EnableReceiverTimeOut() API enables the receiver timeout feature
+ (+) HAL_SMARTCARDEx_DisableReceiverTimeOut() API disables the receiver timeout feature
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Update on the fly the SMARTCARD block length in RTOR register
+ * @param hsmartcard: SMARTCARD handle
+ * @param BlockLength: SMARTCARD block length (8-bit long at most)
+ * @retval None
+ */
+void HAL_SMARTCARDEx_BlockLength_Config(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t BlockLength)
+{
+ MODIFY_REG(hsmartcard->Instance->RTOR, USART_RTOR_BLEN, ((uint32_t)BlockLength << SMARTCARD_RTOR_BLEN_LSB_POS));
+}
+
+/**
+ * @brief Update on the fly the receiver timeout value in RTOR register
+ * @param hsmartcard: SMARTCARD handle
+ * @param TimeOutValue: receiver timeout value in number of baud blocks. The timeout
+ * value must be less or equal to 0x0FFFFFFFF.
+ * @retval None
+ */
+void HAL_SMARTCARDEx_TimeOut_Config(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t TimeOutValue)
+{
+ assert_param(IS_SMARTCARD_TIMEOUT_VALUE(hsmartcard->Init.TimeOutValue));
+ MODIFY_REG(hsmartcard->Instance->RTOR, USART_RTOR_RTO, TimeOutValue);
+}
+
+/**
+ * @brief Enable the SMARTCARD receiver timeout feature
+ * @param hsmartcard: SMARTCARD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SMARTCARDEx_EnableReceiverTimeOut(SMARTCARD_HandleTypeDef *hsmartcard)
+{
+
+ /* Process Locked */
+ __HAL_LOCK(hsmartcard);
+
+ hsmartcard->State = HAL_SMARTCARD_STATE_BUSY;
+
+ /* Set the USART RTOEN bit */
+ hsmartcard->Instance->CR2 |= USART_CR2_RTOEN;
+
+ hsmartcard->State = HAL_SMARTCARD_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsmartcard);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disable the SMARTCARD receiver timeout feature
+ * @param hsmartcard: SMARTCARD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SMARTCARDEx_DisableReceiverTimeOut(SMARTCARD_HandleTypeDef *hsmartcard)
+{
+
+ /* Process Locked */
+ __HAL_LOCK(hsmartcard);
+
+ hsmartcard->State = HAL_SMARTCARD_STATE_BUSY;
+
+ /* Clear the USART RTOEN bit */
+ hsmartcard->Instance->CR2 &= ~(USART_CR2_RTOEN);
+
+ hsmartcard->State = HAL_SMARTCARD_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsmartcard);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
+
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/src/stm32f0xx_hal_smbus.c b/f0/src/stm32f0xx_hal_smbus.c
new file mode 100755
index 0000000000000000000000000000000000000000..e83fe8fe8f8286bc1c3a28ee70d0b82004ff5c26
--- /dev/null
+++ b/f0/src/stm32f0xx_hal_smbus.c
@@ -0,0 +1,1939 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_smbus.c
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief SMBUS HAL module driver.
+ *
+ * This file provides firmware functions to manage the following
+ * functionalities of the System Management Bus (SMBus) peripheral,
+ * based on I2C principales of operation :
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral State and Errors functions
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The SMBUS HAL driver can be used as follows:
+
+ (#) Declare a SMBUS_HandleTypeDef handle structure, for example:
+ SMBUS_HandleTypeDef hsmbus;
+
+ (#)Initialize the SMBUS low level resources by implement the HAL_SMBUS_MspInit ()API:
+ (##) Enable the SMBUSx interface clock
+ (##) SMBUS pins configuration
+ (+++) Enable the clock for the SMBUS GPIOs
+ (+++) Configure SMBUS pins as alternate function open-drain
+ (##) NVIC configuration if you need to use interrupt process
+ (+++) Configure the SMBUSx interrupt priority
+ (+++) Enable the NVIC SMBUS IRQ Channel
+
+ (#) Configure the Communication Clock Timing, Bus Timeout, Own Address1, Master Adressing Mode,
+ Dual Addressing mode, Own Address2, Own Address2 Mask, General call, Nostretch mode,
+ Peripheral mode and Packet Error Check mode in the hsmbus Init structure.
+
+ (#) Initialize the SMBUS registers by calling the HAL_SMBUS_Init() API:
+ (++) These API s configures also the low level Hardware GPIO, CLOCK, CORTEX...etc)
+ by calling the customed HAL_SMBUS_MspInit(&hsmbus) API.
+
+ (#) To check if target device is ready for communication, use the function HAL_SMBUS_IsDeviceReady()
+
+ (#) For SMBUS IO operations, only one mode of operations is available within this driver :
+
+ *** Interrupt mode IO operation ***
+ ===================================
+ [..]
+ (+) Transmit in master/host SMBUS mode an amount of data in non blocking mode using HAL_SMBUS_Master_Transmit_IT()
+ (++) At transmission end of transfer HAL_SMBUS_MasterTxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_SMBUS_MasterTxCpltCallback
+ (+) Receive in master/host SMBUS mode an amount of data in non blocking mode using HAL_SMBUS_Master_Receive_IT()
+ (++) At reception end of transfer HAL_SMBUS_MasterRxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_SMBUS_MasterRxCpltCallback
+ (+) Abort a master/host SMBUS process commnunication with Interrupt using HAL_SMBUS_Master_Abort_IT()
+ (++) The associated previous transfer callback is called at the end of abort process
+ (++) mean HAL_SMBUS_MasterTxCpltCallback in case of previous state was master transmit
+ (++) mean HAL_SMBUS_MasterRxCpltCallback in case of previous state was master receive
+ (+) Enable/disable the Address listen mode in slave/device or host/slave SMBUS mode
+ using HAL_SMBUS_Slave_Listen_IT() HAL_SMBUS_DisableListen_IT()
+ (++) When address slave/device SMBUS match, HAL_SMBUS_SlaveAddrCallback is executed and user can
+ add his own code to check the Address Match Code and the transmission direction request by master/host (Write/Read).
+ (++) At Listen mode end HAL_SMBUS_SlaveListenCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_SMBUS_SlaveListenCpltCallback
+ (+) Transmit in slave/device SMBUS mode an amount of data in non blocking mode using HAL_SMBUS_Slave_Transmit_IT()
+ (++) At transmission end of transfer HAL_SMBUS_SlaveTxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_SMBUS_SlaveTxCpltCallback
+ (+) Receive in slave/device SMBUS mode an amount of data in non blocking mode using HAL_SMBUS_Slave_Receive_IT()
+ (++) At reception end of transfer HAL_SMBUS_SlaveRxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_SMBUS_SlaveRxCpltCallback
+ (+) Enable/Disable the SMBUS alert mode using HAL_SMBUS_EnableAlert_IT() HAL_SMBUS_DisableAlert_IT()
+ (++) When SMBUS Alert is generated HAL_SMBUS_ErrorCallback() is executed and user can
+ add his own code by customization of function pointer HAL_SMBUS_ErrorCallback
+ to check the Alert Error Code using function HAL_SMBUS_GetError()
+ (+) Get HAL state machine or error values using HAL_SMBUS_GetState() or HAL_SMBUS_GetError()
+ (+) In case of transfer Error, HAL_SMBUS_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_SMBUS_ErrorCallback
+ to check the Error Code using function HAL_SMBUS_GetError()
+
+ *** SMBUS HAL driver macros list ***
+ ==================================
+ [..]
+ Below the list of most used macros in SMBUS HAL driver.
+
+ (+) __HAL_SMBUS_ENABLE: Enable the SMBUS peripheral
+ (+) __HAL_SMBUS_DISABLE: Disable the SMBUS peripheral
+ (+) __HAL_SMBUS_GET_FLAG : Checks whether the specified SMBUS flag is set or not
+ (+) __HAL_SMBUS_CLEAR_FLAG : Clears the specified SMBUS pending flag
+ (+) __HAL_SMBUS_ENABLE_IT: Enables the specified SMBUS interrupt
+ (+) __HAL_SMBUS_DISABLE_IT: Disables the specified SMBUS interrupt
+
+ [..]
+ (@) You can refer to the SMBUS HAL driver header file for more useful macros
+
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup SMBUS SMBUS HAL module driver
+ * @brief SMBUS HAL module driver
+ * @{
+ */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup SMBUS_Private_Define SMBUS Private Define
+ * @{
+ */
+#define TIMING_CLEAR_MASK ((uint32_t)0xF0FFFFFF) /*<! SMBUS TIMING clear register Mask */
+#define HAL_TIMEOUT_ADDR ((uint32_t)10000) /* 10 s */
+#define HAL_TIMEOUT_BUSY ((uint32_t)25) /* 25 ms */
+#define HAL_TIMEOUT_DIR ((uint32_t)25) /* 25 ms */
+#define HAL_TIMEOUT_RXNE ((uint32_t)25) /* 25 ms */
+#define HAL_TIMEOUT_STOPF ((uint32_t)25) /* 25 ms */
+#define HAL_TIMEOUT_TC ((uint32_t)25) /* 25 ms */
+#define HAL_TIMEOUT_TCR ((uint32_t)25) /* 25 ms */
+#define HAL_TIMEOUT_TXIS ((uint32_t)25) /* 25 ms */
+#define MAX_NBYTE_SIZE 255
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup SMBUS_Private_Macros SMBUS Private Macros
+ * @{
+ */
+#define __SMBUS_GET_ISR_REG(__HANDLE__) ((__HANDLE__)->Instance->ISR)
+#define __SMBUS_CHECK_FLAG(__ISR__, __FLAG__) ((((__ISR__) & ((__FLAG__) & SMBUS_FLAG_MASK)) == ((__FLAG__) & SMBUS_FLAG_MASK)))
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup SMBUS_Private_Functions SMBUS Private Functions
+ * @{
+ */
+static HAL_StatusTypeDef SMBUS_WaitOnFlagUntilTimeout(SMBUS_HandleTypeDef *hsmbus, uint32_t Flag, FlagStatus Status, uint32_t Timeout);
+
+static HAL_StatusTypeDef SMBUS_Enable_IRQ(SMBUS_HandleTypeDef *hsmbus, uint16_t InterruptRequest);
+static HAL_StatusTypeDef SMBUS_Disable_IRQ(SMBUS_HandleTypeDef *hsmbus, uint16_t InterruptRequest);
+static HAL_StatusTypeDef SMBUS_Master_ISR(SMBUS_HandleTypeDef *hsmbus);
+static HAL_StatusTypeDef SMBUS_Slave_ISR(SMBUS_HandleTypeDef *hsmbus);
+
+static void SMBUS_TransferConfig(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t Size, uint32_t Mode, uint32_t Request);
+/**
+ * @}
+ */
+
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup SMBUS_Exported_Functions SMBUS Exported Functions
+ * @{
+ */
+
+/** @defgroup SMBUS_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..] This subsection provides a set of functions allowing to initialize and
+ de-initialiaze the SMBUSx peripheral:
+
+ (+) User must Implement HAL_SMBUS_MspInit() function in which he configures
+ all related peripherals resources (CLOCK, GPIO, IT and NVIC ).
+
+ (+) Call the function HAL_SMBUS_Init() to configure the selected device with
+ the selected configuration:
+ (++) Clock Timing
+ (++) Bus Timeout
+ (++) Analog Filer mode
+ (++) Own Address 1
+ (++) Addressing mode (Master, Slave)
+ (++) Dual Addressing mode
+ (++) Own Address 2
+ (++) Own Address 2 Mask
+ (++) General call mode
+ (++) Nostretch mode
+ (++) Packet Error Check mode
+ (++) Peripheral mode
+
+
+ (+) Call the function HAL_SMBUS_DeInit() to restore the default configuration
+ of the selected SMBUSx periperal.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the SMBUS according to the specified parameters
+ * in the SMBUS_InitTypeDef and create the associated handle.
+ * @param hsmbus : Pointer to a SMBUS_HandleTypeDef structure that contains
+ * the configuration information for the specified SMBUS.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SMBUS_Init(SMBUS_HandleTypeDef *hsmbus)
+{
+ /* Check the SMBUS handle allocation */
+ if(hsmbus == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_SMBUS_ALL_INSTANCE(hsmbus->Instance));
+ assert_param(IS_SMBUS_ANALOG_FILTER(hsmbus->Init.AnalogFilter));
+ assert_param(IS_SMBUS_OWN_ADDRESS1(hsmbus->Init.OwnAddress1));
+ assert_param(IS_SMBUS_ADDRESSING_MODE(hsmbus->Init.AddressingMode));
+ assert_param(IS_SMBUS_DUAL_ADDRESS(hsmbus->Init.DualAddressMode));
+ assert_param(IS_SMBUS_OWN_ADDRESS2(hsmbus->Init.OwnAddress2));
+ assert_param(IS_SMBUS_OWN_ADDRESS2_MASK(hsmbus->Init.OwnAddress2Masks));
+ assert_param(IS_SMBUS_GENERAL_CALL(hsmbus->Init.GeneralCallMode));
+ assert_param(IS_SMBUS_NO_STRETCH(hsmbus->Init.NoStretchMode));
+ assert_param(IS_SMBUS_PEC(hsmbus->Init.PacketErrorCheckMode));
+ assert_param(IS_SMBUS_PERIPHERAL_MODE(hsmbus->Init.PeripheralMode));
+
+ if(hsmbus->State == HAL_SMBUS_STATE_RESET)
+ {
+ /* Init the low level hardware : GPIO, CLOCK, NVIC */
+ HAL_SMBUS_MspInit(hsmbus);
+ }
+
+ hsmbus->State = HAL_SMBUS_STATE_BUSY;
+
+ /* Disable the selected SMBUS peripheral */
+ __HAL_SMBUS_DISABLE(hsmbus);
+
+ /*---------------------------- SMBUSx TIMINGR Configuration ------------------------*/
+ /* Configure SMBUSx: Frequency range */
+ hsmbus->Instance->TIMINGR = hsmbus->Init.Timing & TIMING_CLEAR_MASK;
+
+ /*---------------------------- SMBUSx TIMEOUTR Configuration ------------------------*/
+ /* Configure SMBUSx: Bus Timeout */
+ hsmbus->Instance->TIMEOUTR &= ~I2C_TIMEOUTR_TIMOUTEN;
+ hsmbus->Instance->TIMEOUTR &= ~I2C_TIMEOUTR_TEXTEN;
+ hsmbus->Instance->TIMEOUTR = hsmbus->Init.SMBusTimeout;
+
+ /*---------------------------- SMBUSx OAR1 Configuration -----------------------*/
+ /* Configure SMBUSx: Own Address1 and ack own address1 mode */
+ hsmbus->Instance->OAR1 &= ~I2C_OAR1_OA1EN;
+
+ if(hsmbus->Init.OwnAddress1 != 0)
+ {
+ if(hsmbus->Init.AddressingMode == SMBUS_ADDRESSINGMODE_7BIT)
+ {
+ hsmbus->Instance->OAR1 = (I2C_OAR1_OA1EN | hsmbus->Init.OwnAddress1);
+ }
+ else /* SMBUS_ADDRESSINGMODE_10BIT */
+ {
+ hsmbus->Instance->OAR1 = (I2C_OAR1_OA1EN | I2C_OAR1_OA1MODE | hsmbus->Init.OwnAddress1);
+ }
+ }
+
+ /*---------------------------- SMBUSx CR2 Configuration ------------------------*/
+ /* Configure SMBUSx: Addressing Master mode */
+ if(hsmbus->Init.AddressingMode == SMBUS_ADDRESSINGMODE_10BIT)
+ {
+ hsmbus->Instance->CR2 = (I2C_CR2_ADD10);
+ }
+ /* Enable the AUTOEND by default, and enable NACK (should be disable only during Slave process) */
+ /* AUTOEND and NACK bit will be manage during Transfer process */
+ hsmbus->Instance->CR2 |= (I2C_CR2_AUTOEND | I2C_CR2_NACK);
+
+ /*---------------------------- SMBUSx OAR2 Configuration -----------------------*/
+ /* Configure SMBUSx: Dual mode and Own Address2 */
+ hsmbus->Instance->OAR2 = (hsmbus->Init.DualAddressMode | hsmbus->Init.OwnAddress2 | (hsmbus->Init.OwnAddress2Masks << 8));
+
+ /*---------------------------- SMBUSx CR1 Configuration ------------------------*/
+ /* Configure SMBUSx: Generalcall and NoStretch mode */
+ hsmbus->Instance->CR1 = (hsmbus->Init.GeneralCallMode | hsmbus->Init.NoStretchMode | hsmbus->Init.PacketErrorCheckMode | hsmbus->Init.PeripheralMode | hsmbus->Init.AnalogFilter);
+
+ /* Enable Slave Byte Control only in case of Packet Error Check is enabled and SMBUS Peripheral is set in Slave mode */
+ if( (hsmbus->Init.PacketErrorCheckMode == SMBUS_PEC_ENABLED)
+ && ( (hsmbus->Init.PeripheralMode == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE) || (hsmbus->Init.PeripheralMode == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE_ARP) ) )
+ {
+ hsmbus->Instance->CR1 |= I2C_CR1_SBC;
+ }
+
+ /* Enable the selected SMBUS peripheral */
+ __HAL_SMBUS_ENABLE(hsmbus);
+
+ hsmbus->ErrorCode = HAL_SMBUS_ERROR_NONE;
+ hsmbus->PreviousState = HAL_SMBUS_STATE_READY;
+ hsmbus->State = HAL_SMBUS_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the SMBUS peripheral.
+ * @param hsmbus : Pointer to a SMBUS_HandleTypeDef structure that contains
+ * the configuration information for the specified SMBUS.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SMBUS_DeInit(SMBUS_HandleTypeDef *hsmbus)
+{
+ /* Check the SMBUS handle allocation */
+ if(hsmbus == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_SMBUS_ALL_INSTANCE(hsmbus->Instance));
+
+ hsmbus->State = HAL_SMBUS_STATE_BUSY;
+
+ /* Disable the SMBUS Peripheral Clock */
+ __HAL_SMBUS_DISABLE(hsmbus);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+ HAL_SMBUS_MspDeInit(hsmbus);
+
+ hsmbus->ErrorCode = HAL_SMBUS_ERROR_NONE;
+ hsmbus->PreviousState = HAL_SMBUS_STATE_RESET;
+ hsmbus->State = HAL_SMBUS_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hsmbus);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief SMBUS MSP Init.
+ * @param hsmbus : Pointer to a SMBUS_HandleTypeDef structure that contains
+ * the configuration information for the specified SMBUS.
+ * @retval None
+ */
+ __weak void HAL_SMBUS_MspInit(SMBUS_HandleTypeDef *hsmbus)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SMBUS_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief SMBUS MSP DeInit
+ * @param hsmbus : Pointer to a SMBUS_HandleTypeDef structure that contains
+ * the configuration information for the specified SMBUS.
+ * @retval None
+ */
+ __weak void HAL_SMBUS_MspDeInit(SMBUS_HandleTypeDef *hsmbus)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SMBUS_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_Exported_Functions_Group2 Input and Output operation functions
+ * @brief Data transfers functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the SMBUS data
+ transfers.
+
+ (#) Blocking mode function to check if device is ready for usage is :
+ (++) HAL_SMBUS_IsDeviceReady()
+
+ (#) There is only one mode of transfer:
+ (++) No-Blocking mode : The communication is performed using Interrupts.
+ These functions return the status of the transfer startup.
+ The end of the data processing will be indicated through the
+ dedicated SMBUS IRQ when using Interrupt mode.
+
+ (#) No-Blocking mode functions with Interrupt are :
+ (++) HAL_SMBUS_Master_Transmit_IT()
+ (++) HAL_SMBUS_Master_Receive_IT()
+ (++) HAL_SMBUS_Slave_Transmit_IT()
+ (++) HAL_SMBUS_Slave_Receive_IT()
+ (++) HAL_SMBUS_Slave_Listen_IT() or alias HAL_SMBUS_EnableListen_IT()
+ (++) HAL_SMBUS_DisableListen_IT()
+ (++) HAL_SMBUS_EnableAlert_IT()
+ (++) HAL_SMBUS_DisableAlert_IT()
+
+ (#) A set of Transfer Complete Callbacks are provided in No_Blocking mode:
+ (++) HAL_SMBUS_MasterTxCpltCallback()
+ (++) HAL_SMBUS_MasterRxCpltCallback()
+ (++) HAL_SMBUS_SlaveTxCpltCallback()
+ (++) HAL_SMBUS_SlaveRxCpltCallback()
+ (++) HAL_SMBUS_SlaveAddrCallback() or alias HAL_SMBUS_AddrCallback()
+ (++) HAL_SMBUS_SlaveListenCpltCallback() or alias HAL_SMBUS_ListenCpltCallback()
+ (++) HAL_SMBUS_ErrorCallback()
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Transmit in master/host SMBUS mode an amount of data in no-blocking mode with Interrupt
+ * @param hsmbus : Pointer to a SMBUS_HandleTypeDef structure that contains
+ * the configuration information for the specified SMBUS.
+ * @param DevAddress: Target device address
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be sent
+ * @param XferOptions: Options of Transfer, value of @ref SMBUS_XferOptions_definition
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SMBUS_Master_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
+{
+ /* Check the parameters */
+ assert_param(IS_SMBUS_TRANSFER_OPTIONS_REQUEST(XferOptions));
+
+ if(hsmbus->State == HAL_SMBUS_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hsmbus);
+
+ hsmbus->State = HAL_SMBUS_STATE_MASTER_BUSY_TX;
+ hsmbus->ErrorCode = HAL_SMBUS_ERROR_NONE;
+ /* Prepare transfer parameters */
+ hsmbus->pBuffPtr = pData;
+ hsmbus->XferCount = Size;
+ hsmbus->XferOptions = XferOptions;
+
+ /* In case of Quick command, remove autoend mode */
+ /* Manage the stop generation by software */
+ if(hsmbus->pBuffPtr == NULL)
+ {
+ hsmbus->XferOptions &= ~SMBUS_AUTOEND_MODE;
+ }
+
+ if(Size > MAX_NBYTE_SIZE)
+ {
+ hsmbus->XferSize = MAX_NBYTE_SIZE;
+ }
+ else
+ {
+ hsmbus->XferSize = Size;
+ }
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if size > MAX_NBYTE_SIZE and generate RESTART */
+ if( (hsmbus->XferSize == MAX_NBYTE_SIZE) && (hsmbus->XferSize < hsmbus->XferCount) )
+ {
+ SMBUS_TransferConfig(hsmbus,DevAddress,hsmbus->XferSize, SMBUS_RELOAD_MODE | (hsmbus->XferOptions & SMBUS_SENDPEC_MODE), SMBUS_GENERATE_START_WRITE);
+ }
+ else
+ {
+ /* If transfer direction not change, do not generate Restart Condition */
+ /* Mean Previous state is same as current state */
+ if(hsmbus->PreviousState == HAL_SMBUS_STATE_MASTER_BUSY_TX)
+ {
+ SMBUS_TransferConfig(hsmbus,DevAddress,hsmbus->XferSize, hsmbus->XferOptions, SMBUS_NO_STARTSTOP);
+ }
+ /* Else transfer direction change, so generate Restart with new transfer direction */
+ else
+ {
+ SMBUS_TransferConfig(hsmbus,DevAddress,hsmbus->XferSize, hsmbus->XferOptions, SMBUS_GENERATE_START_WRITE);
+ }
+
+ /* If PEC mode is enable, size to transmit manage by SW part should be Size-1 byte, corresponding to PEC byte */
+ /* PEC byte is automatically sent by HW block, no need to manage it in Transmit process */
+ if(__HAL_SMBUS_GET_PEC_MODE(hsmbus) != RESET)
+ {
+ hsmbus->XferSize--;
+ hsmbus->XferCount--;
+ }
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsmbus);
+
+ /* Note : The SMBUS interrupts must be enabled after unlocking current process
+ to avoid the risk of SMBUS interrupt handle execution before current
+ process unlock */
+ SMBUS_Enable_IRQ(hsmbus, SMBUS_IT_TX);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive in master/host SMBUS mode an amount of data in no-blocking mode with Interrupt
+ * @param hsmbus : Pointer to a SMBUS_HandleTypeDef structure that contains
+ * the configuration information for the specified SMBUS.
+ * @param DevAddress: Target device address
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be sent
+ * @param XferOptions: Options of Transfer, value of @ref SMBUS_XferOptions_definition
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SMBUS_Master_Receive_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
+{
+ /* Check the parameters */
+ assert_param(IS_SMBUS_TRANSFER_OPTIONS_REQUEST(XferOptions));
+
+ if(hsmbus->State == HAL_SMBUS_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hsmbus);
+
+ hsmbus->State = HAL_SMBUS_STATE_MASTER_BUSY_RX;
+ hsmbus->ErrorCode = HAL_SMBUS_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hsmbus->pBuffPtr = pData;
+ hsmbus->XferCount = Size;
+ hsmbus->XferOptions = XferOptions;
+
+ /* In case of Quick command, remove autoend mode */
+ /* Manage the stop generation by software */
+ if(hsmbus->pBuffPtr == NULL)
+ {
+ hsmbus->XferOptions &= ~SMBUS_AUTOEND_MODE;
+ }
+
+ if(Size > MAX_NBYTE_SIZE)
+ {
+ hsmbus->XferSize = MAX_NBYTE_SIZE;
+ }
+ else
+ {
+ hsmbus->XferSize = Size;
+ }
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if size > MAX_NBYTE_SIZE and generate RESTART */
+ if( (hsmbus->XferSize == MAX_NBYTE_SIZE) && (hsmbus->XferSize < hsmbus->XferCount) )
+ {
+ SMBUS_TransferConfig(hsmbus,DevAddress,hsmbus->XferSize, SMBUS_RELOAD_MODE | (hsmbus->XferOptions & SMBUS_SENDPEC_MODE), SMBUS_GENERATE_START_READ);
+ }
+ else
+ {
+ /* If transfer direction not change, do not generate Restart Condition */
+ /* Mean Previous state is same as current state */
+ if(hsmbus->PreviousState == HAL_SMBUS_STATE_MASTER_BUSY_RX)
+ {
+ SMBUS_TransferConfig(hsmbus,DevAddress,hsmbus->XferSize, hsmbus->XferOptions, SMBUS_NO_STARTSTOP);
+ }
+ /* Else transfer direction change, so generate Restart with new transfer direction */
+ else
+ {
+ SMBUS_TransferConfig(hsmbus,DevAddress,hsmbus->XferSize, hsmbus->XferOptions, SMBUS_GENERATE_START_READ);
+ }
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsmbus);
+
+ /* Note : The SMBUS interrupts must be enabled after unlocking current process
+ to avoid the risk of SMBUS interrupt handle execution before current
+ process unlock */
+ SMBUS_Enable_IRQ(hsmbus, SMBUS_IT_RX);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Abort a master/host SMBUS process commnunication with Interrupt
+ * @note : This abort can be called only if state is ready
+ * @param hsmbus : Pointer to a SMBUS_HandleTypeDef structure that contains
+ * the configuration information for the specified SMBUS.
+ * @param DevAddress: Target device address
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SMBUS_Master_Abort_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress)
+{
+ if(hsmbus->State == HAL_SMBUS_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hsmbus);
+
+ /* Keep the same state as previous */
+ /* to perform as well the call of the corresponding end of transfer callback */
+ if(hsmbus->PreviousState == HAL_SMBUS_STATE_MASTER_BUSY_TX)
+ {
+ hsmbus->State = HAL_SMBUS_STATE_MASTER_BUSY_TX;
+ }
+ else if(hsmbus->PreviousState == HAL_SMBUS_STATE_MASTER_BUSY_RX)
+ {
+ hsmbus->State = HAL_SMBUS_STATE_MASTER_BUSY_RX;
+ }
+ else
+ {
+ /* Wrong usage of abort function */
+ /* This function should be used only in case of abort monitored by master device */
+ return HAL_ERROR;
+ }
+ hsmbus->ErrorCode = HAL_SMBUS_ERROR_NONE;
+
+ /* Set NBYTES to 1 to generate a dummy read on SMBUS peripheral */
+ /* Set AUTOEND mode, this will generate a NACK then STOP condition to abort the current transfer */
+ SMBUS_TransferConfig(hsmbus, DevAddress, 1, SMBUS_AUTOEND_MODE, SMBUS_NO_STARTSTOP);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsmbus);
+
+ /* Note : The SMBUS interrupts must be enabled after unlocking current process
+ to avoid the risk of SMBUS interrupt handle execution before current
+ process unlock */
+ if(hsmbus->State == HAL_SMBUS_STATE_MASTER_BUSY_TX)
+ {
+ SMBUS_Enable_IRQ(hsmbus, SMBUS_IT_TX);
+ }
+ else if(hsmbus->State == HAL_SMBUS_STATE_MASTER_BUSY_RX)
+ {
+ SMBUS_Enable_IRQ(hsmbus, SMBUS_IT_RX);
+ }
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmit in slave/device SMBUS mode an amount of data in no-blocking mode with Interrupt
+ * @param hsmbus : Pointer to a SMBUS_HandleTypeDef structure that contains
+ * the configuration information for the specified SMBUS.
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be sent
+ * @param XferOptions: Options of Transfer, value of @ref SMBUS_XferOptions_definition
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SMBUS_Slave_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
+{
+ /* Check the parameters */
+ assert_param(IS_SMBUS_TRANSFER_OPTIONS_REQUEST(XferOptions));
+
+ if(hsmbus->State == HAL_SMBUS_STATE_LISTEN)
+ {
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Disable Interrupts, to prevent preemption during treatment in case of multicall */
+ SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_ADDR | SMBUS_IT_TX);
+
+ /* Process Locked */
+ __HAL_LOCK(hsmbus);
+
+ hsmbus->State |= HAL_SMBUS_STATE_SLAVE_BUSY_TX;
+ hsmbus->ErrorCode = HAL_SMBUS_ERROR_NONE;
+
+ /* Set SBC bit to manage Acknowledge at each bit */
+ hsmbus->Instance->CR1 |= I2C_CR1_SBC;
+
+ /* Enable Address Acknowledge */
+ hsmbus->Instance->CR2 &= ~I2C_CR2_NACK;
+
+ /* Prepare transfer parameters */
+ hsmbus->pBuffPtr = pData;
+ hsmbus->XferSize = Size;
+ hsmbus->XferCount = Size;
+ hsmbus->XferOptions = XferOptions;
+
+ if(Size > MAX_NBYTE_SIZE)
+ {
+ hsmbus->XferSize = MAX_NBYTE_SIZE;
+ }
+ else
+ {
+ hsmbus->XferSize = Size;
+ }
+
+ /* Set NBYTES to write and reload if size > MAX_NBYTE_SIZE and generate RESTART */
+ if( (hsmbus->XferSize == MAX_NBYTE_SIZE) && (hsmbus->XferSize < hsmbus->XferCount) )
+ {
+ SMBUS_TransferConfig(hsmbus,0,hsmbus->XferSize, SMBUS_RELOAD_MODE | (hsmbus->XferOptions & SMBUS_SENDPEC_MODE), SMBUS_NO_STARTSTOP);
+ }
+ else
+ {
+ /* Set NBYTE to transmit */
+ SMBUS_TransferConfig(hsmbus,0,hsmbus->XferSize, hsmbus->XferOptions, SMBUS_NO_STARTSTOP);
+
+ /* If PEC mode is enable, size to transmit should be Size-1 byte, corresponding to PEC byte */
+ /* PEC byte is automatically sent by HW block, no need to manage it in Transmit process */
+ if(__HAL_SMBUS_GET_PEC_MODE(hsmbus) != RESET)
+ {
+ hsmbus->XferSize--;
+ hsmbus->XferCount--;
+ }
+ }
+
+ /* Clear ADDR flag after prepare the transfer parameters */
+ /* This action will generate an acknowledge to the HOST */
+ __HAL_SMBUS_CLEAR_FLAG(hsmbus,SMBUS_FLAG_ADDR);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsmbus);
+
+ /* Note : The SMBUS interrupts must be enabled after unlocking current process
+ to avoid the risk of SMBUS interrupt handle execution before current
+ process unlock */
+ /* REnable ADDR interrupt */
+ SMBUS_Enable_IRQ(hsmbus, SMBUS_IT_TX | SMBUS_IT_ADDR);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Receive in slave/device SMBUS mode an amount of data in no-blocking mode with Interrupt
+ * @param hsmbus : Pointer to a SMBUS_HandleTypeDef structure that contains
+ * the configuration information for the specified SMBUS.
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be sent
+ * @param XferOptions: Options of Transfer, value of @ref SMBUS_XferOptions_definition
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SMBUS_Slave_Receive_IT(SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
+{
+ /* Check the parameters */
+ assert_param(IS_SMBUS_TRANSFER_OPTIONS_REQUEST(XferOptions));
+
+ if(hsmbus->State == HAL_SMBUS_STATE_LISTEN)
+ {
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Disable Interrupts, to prevent preemption during treatment in case of multicall */
+ SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_ADDR | SMBUS_IT_RX);
+
+ /* Process Locked */
+ __HAL_LOCK(hsmbus);
+
+ hsmbus->State |= HAL_SMBUS_STATE_SLAVE_BUSY_RX;
+ hsmbus->ErrorCode = HAL_SMBUS_ERROR_NONE;
+
+ /* Set SBC bit to manage Acknowledge at each bit */
+ hsmbus->Instance->CR1 |= I2C_CR1_SBC;
+
+ /* Enable Address Acknowledge */
+ hsmbus->Instance->CR2 &= ~I2C_CR2_NACK;
+
+ /* Prepare transfer parameters */
+ hsmbus->pBuffPtr = pData;
+ hsmbus->XferSize = Size;
+ hsmbus->XferCount = Size;
+ hsmbus->XferOptions = XferOptions;
+
+ /* Set NBYTE to receive */
+ /* If XferSize equal "1", or XferSize equal "2" with PEC requested (mean 1 data byte + 1 PEC byte */
+ /* no need to set RELOAD bit mode, a ACK will be automatically generated in that case */
+ /* else need to set RELOAD bit mode to generate an automatic ACK at each byte Received */
+ /* This RELOAD bit will be reset for last BYTE to be receive in SMBUS_Slave_ISR */
+ if((hsmbus->XferSize == 1) || ((hsmbus->XferSize == 2) && (__HAL_SMBUS_GET_PEC_MODE(hsmbus) != RESET)))
+ {
+ SMBUS_TransferConfig(hsmbus,0,hsmbus->XferSize, hsmbus->XferOptions, SMBUS_NO_STARTSTOP);
+ }
+ else
+ {
+ SMBUS_TransferConfig(hsmbus,0, 1, hsmbus->XferOptions | SMBUS_RELOAD_MODE, SMBUS_NO_STARTSTOP);
+ }
+
+ /* Clear ADDR flag after prepare the transfer parameters */
+ /* This action will generate an acknowledge to the HOST */
+ __HAL_SMBUS_CLEAR_FLAG(hsmbus,SMBUS_FLAG_ADDR);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsmbus);
+
+ /* Note : The SMBUS interrupts must be enabled after unlocking current process
+ to avoid the risk of SMBUS interrupt handle execution before current
+ process unlock */
+ /* REnable ADDR interrupt */
+ SMBUS_Enable_IRQ(hsmbus, SMBUS_IT_RX | SMBUS_IT_ADDR);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief This function enable the Address listen mode
+ * @param hsmbus : Pointer to a SMBUS_HandleTypeDef structure that contains
+ * the configuration information for the specified SMBUS.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SMBUS_Slave_Listen_IT(SMBUS_HandleTypeDef *hsmbus)
+{
+ hsmbus->State = HAL_SMBUS_STATE_LISTEN;
+
+ /* Enable the Address Match interrupt */
+ SMBUS_Enable_IRQ(hsmbus, SMBUS_IT_ADDR);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief This function disable the Address listen mode
+ * @param hsmbus : Pointer to a SMBUS_HandleTypeDef structure that contains
+ * the configuration information for the specified SMBUS.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SMBUS_DisableListen_IT(SMBUS_HandleTypeDef *hsmbus)
+{
+ /* Disable Address listen mode only if a transfer is not ongoing */
+ if(hsmbus->State == HAL_SMBUS_STATE_LISTEN)
+ {
+ hsmbus->State = HAL_SMBUS_STATE_READY;
+
+ /* Disable the Address Match interrupt */
+ SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_ADDR);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief This function enable the SMBUS alert mode.
+ * @param hsmbus : pointer to a SMBUS_HandleTypeDef structure that contains
+ * the configuration information for the specified SMBUSx peripheral.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SMBUS_EnableAlert_IT(SMBUS_HandleTypeDef *hsmbus)
+{
+ /* Enable SMBus alert */
+ hsmbus->Instance->CR1 |= I2C_CR1_ALERTEN;
+
+ /* Clear ALERT flag */
+ __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_ALERT);
+
+ /* Enable Alert Interrupt */
+ SMBUS_Enable_IRQ(hsmbus, SMBUS_IT_ALERT);
+
+ return HAL_OK;
+}
+/**
+ * @brief This function disable the SMBUS alert mode.
+ * @param hsmbus : pointer to a SMBUS_HandleTypeDef structure that contains
+ * the configuration information for the specified SMBUSx peripheral.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SMBUS_DisableAlert_IT(SMBUS_HandleTypeDef *hsmbus)
+{
+ /* Enable SMBus alert */
+ hsmbus->Instance->CR1 &= ~I2C_CR1_ALERTEN;
+
+ /* Disable Alert Interrupt */
+ SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_ALERT);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Checks if target device is ready for communication.
+ * @note This function is used with Memory devices
+ * @param hsmbus : Pointer to a SMBUS_HandleTypeDef structure that contains
+ * the configuration information for the specified SMBUS.
+ * @param DevAddress: Target device address
+ * @param Trials: Number of trials
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SMBUS_IsDeviceReady(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout)
+{
+ uint32_t tickstart = 0;
+
+ __IO uint32_t SMBUS_Trials = 0;
+
+ if(hsmbus->State == HAL_SMBUS_STATE_READY)
+ {
+ if(__HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_BUSY) != RESET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hsmbus);
+
+ hsmbus->State = HAL_SMBUS_STATE_BUSY;
+ hsmbus->ErrorCode = HAL_SMBUS_ERROR_NONE;
+
+ do
+ {
+ /* Generate Start */
+ hsmbus->Instance->CR2 = __HAL_SMBUS_GENERATE_START(hsmbus->Init.AddressingMode,DevAddress);
+
+ /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+ /* Wait until STOPF flag is set or a NACK flag is set*/
+ tickstart = HAL_GetTick();
+ while((__HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_STOPF) == RESET) && (__HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_AF) == RESET) && (hsmbus->State != HAL_SMBUS_STATE_TIMEOUT))
+ {
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0) || ((HAL_GetTick() - tickstart) > Timeout))
+ {
+ /* Device is ready */
+ hsmbus->State = HAL_SMBUS_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsmbus);
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Check if the NACKF flag has not been set */
+ if (__HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_AF) == RESET)
+ {
+ /* Wait until STOPF flag is reset */
+ if(SMBUS_WaitOnFlagUntilTimeout(hsmbus, SMBUS_FLAG_STOPF, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear STOP Flag */
+ __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_STOPF);
+
+ /* Device is ready */
+ hsmbus->State = HAL_SMBUS_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsmbus);
+
+ return HAL_OK;
+ }
+ else
+ {
+ /* Wait until STOPF flag is reset */
+ if(SMBUS_WaitOnFlagUntilTimeout(hsmbus, SMBUS_FLAG_STOPF, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear NACK Flag */
+ __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_AF);
+
+ /* Clear STOP Flag, auto generated with autoend*/
+ __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_STOPF);
+ }
+
+ /* Check if the maximum allowed number of trials has been reached */
+ if (SMBUS_Trials++ == Trials)
+ {
+ /* Generate Stop */
+ hsmbus->Instance->CR2 |= I2C_CR2_STOP;
+
+ /* Wait until STOPF flag is reset */
+ if(SMBUS_WaitOnFlagUntilTimeout(hsmbus, SMBUS_FLAG_STOPF, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear STOP Flag */
+ __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_STOPF);
+ }
+ }while(SMBUS_Trials < Trials);
+
+ hsmbus->State = HAL_SMBUS_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsmbus);
+
+ return HAL_TIMEOUT;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief This function handles SMBUS event interrupt request.
+ * @param hsmbus : Pointer to a SMBUS_HandleTypeDef structure that contains
+ * the configuration information for the specified SMBUS.
+ * @retval None
+ */
+void HAL_SMBUS_EV_IRQHandler(SMBUS_HandleTypeDef *hsmbus)
+{
+ uint32_t tmpisrvalue = 0;
+
+ /* Use a local variable to store the current ISR flags */
+ /* This action will avoid a wrong treatment due to ISR flags change during interrupt handler */
+ tmpisrvalue = __SMBUS_GET_ISR_REG(hsmbus);
+
+ /* SMBUS in mode Transmitter ---------------------------------------------------*/
+ if (((__SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_TXIS) != RESET) || (__SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_TCR) != RESET) || (__SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_TC) != RESET) || (__SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_STOPF) != RESET) || (__SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_AF) != RESET)) && (__HAL_SMBUS_GET_IT_SOURCE(hsmbus, (SMBUS_IT_TCI| SMBUS_IT_STOPI| SMBUS_IT_NACKI | SMBUS_IT_TXI)) != RESET))
+ {
+ /* Slave mode selected */
+ if ((hsmbus->State & HAL_SMBUS_STATE_SLAVE_BUSY_TX) == HAL_SMBUS_STATE_SLAVE_BUSY_TX)
+ {
+ SMBUS_Slave_ISR(hsmbus);
+ }
+ /* Master mode selected */
+ else if((hsmbus->State & HAL_SMBUS_STATE_MASTER_BUSY_TX) == HAL_SMBUS_STATE_MASTER_BUSY_TX)
+ {
+ SMBUS_Master_ISR(hsmbus);
+ }
+ }
+
+ /* SMBUS in mode Receiver ----------------------------------------------------*/
+ if (((__SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_RXNE) != RESET) || (__SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_TCR) != RESET) || (__SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_TC) != RESET) || (__SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_STOPF) != RESET) || (__SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_AF) != RESET)) && (__HAL_SMBUS_GET_IT_SOURCE(hsmbus, (SMBUS_IT_TCI| SMBUS_IT_STOPI| SMBUS_IT_NACKI | SMBUS_IT_RXI)) != RESET))
+ {
+ /* Slave mode selected */
+ if ((hsmbus->State & HAL_SMBUS_STATE_SLAVE_BUSY_RX) == HAL_SMBUS_STATE_SLAVE_BUSY_RX)
+ {
+ SMBUS_Slave_ISR(hsmbus);
+ }
+ /* Master mode selected */
+ else if((hsmbus->State & HAL_SMBUS_STATE_MASTER_BUSY_RX) == HAL_SMBUS_STATE_MASTER_BUSY_RX)
+ {
+ SMBUS_Master_ISR(hsmbus);
+ }
+ }
+
+ /* SMBUS in mode Listener Only --------------------------------------------------*/
+ if (((__SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_ADDR) != RESET) || (__SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_STOPF) != RESET) || (__SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_AF) != RESET))
+ && ((__HAL_SMBUS_GET_IT_SOURCE(hsmbus, SMBUS_IT_ADDRI) != RESET) || (__HAL_SMBUS_GET_IT_SOURCE(hsmbus, SMBUS_IT_STOPI) != RESET) || (__HAL_SMBUS_GET_IT_SOURCE(hsmbus, SMBUS_IT_NACKI) != RESET)))
+ {
+ if (hsmbus->State == HAL_SMBUS_STATE_LISTEN)
+ {
+ SMBUS_Slave_ISR(hsmbus);
+ }
+ }
+}
+
+/**
+ * @brief This function handles SMBUS error interrupt request.
+ * @param hsmbus : Pointer to a SMBUS_HandleTypeDef structure that contains
+ * the configuration information for the specified SMBUS.
+ * @retval None
+ */
+void HAL_SMBUS_ER_IRQHandler(SMBUS_HandleTypeDef *hsmbus)
+{
+ /* SMBUS Bus error interrupt occurred ------------------------------------*/
+ if((__HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_BERR) != RESET) && (__HAL_SMBUS_GET_IT_SOURCE(hsmbus, SMBUS_IT_ERRI) != RESET))
+ {
+ hsmbus->ErrorCode |= HAL_SMBUS_ERROR_BERR;
+
+ /* Clear BERR flag */
+ __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_BERR);
+ }
+
+ /* SMBUS Over-Run/Under-Run interrupt occurred ----------------------------------------*/
+ if((__HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_OVR) != RESET) && (__HAL_SMBUS_GET_IT_SOURCE(hsmbus, SMBUS_IT_ERRI) != RESET))
+ {
+ hsmbus->ErrorCode |= HAL_SMBUS_ERROR_OVR;
+
+ /* Clear OVR flag */
+ __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_OVR);
+ }
+
+ /* SMBUS Arbitration Loss error interrupt occurred ------------------------------------*/
+ if((__HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_ARLO) != RESET) && (__HAL_SMBUS_GET_IT_SOURCE(hsmbus, SMBUS_IT_ERRI) != RESET))
+ {
+ hsmbus->ErrorCode |= HAL_SMBUS_ERROR_ARLO;
+
+ /* Clear ARLO flag */
+ __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_ARLO);
+ }
+
+ /* SMBUS Timeout error interrupt occurred ---------------------------------------------*/
+ if((__HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_TIMEOUT) != RESET) && (__HAL_SMBUS_GET_IT_SOURCE(hsmbus, SMBUS_IT_ERRI) != RESET))
+ {
+ hsmbus->ErrorCode |= HAL_SMBUS_ERROR_BUSTIMEOUT;
+
+ /* Clear TIMEOUT flag */
+ __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_TIMEOUT);
+ }
+
+ /* SMBUS Alert error interrupt occurred -----------------------------------------------*/
+ if((__HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_ALERT) != RESET) && (__HAL_SMBUS_GET_IT_SOURCE(hsmbus, SMBUS_IT_ERRI) != RESET))
+ {
+ hsmbus->ErrorCode |= HAL_SMBUS_ERROR_ALERT;
+
+ /* Clear ALERT flag */
+ __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_ALERT);
+ }
+
+ /* SMBUS Packet Error Check error interrupt occurred ----------------------------------*/
+ if((__HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_PECERR) != RESET) && (__HAL_SMBUS_GET_IT_SOURCE(hsmbus, SMBUS_IT_ERRI) != RESET))
+ {
+ hsmbus->ErrorCode |= HAL_SMBUS_ERROR_PECERR;
+
+ /* Clear PEC error flag */
+ __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_PECERR);
+ }
+
+ /* Call the Error Callback in case of Error detected */
+ if((hsmbus->ErrorCode != HAL_SMBUS_ERROR_NONE)&&(hsmbus->ErrorCode != HAL_SMBUS_ERROR_ACKF))
+ {
+ /* Do not Reset the the HAL state in case of ALERT error */
+ if((hsmbus->ErrorCode & HAL_SMBUS_ERROR_ALERT) != HAL_SMBUS_ERROR_ALERT)
+ {
+ if(((hsmbus->State & HAL_SMBUS_STATE_SLAVE_BUSY_TX) == HAL_SMBUS_STATE_SLAVE_BUSY_TX)
+ || ((hsmbus->State & HAL_SMBUS_STATE_SLAVE_BUSY_RX) == HAL_SMBUS_STATE_SLAVE_BUSY_RX))
+ {
+ /* Reset only HAL_SMBUS_STATE_SLAVE_BUSY_XX */
+ /* keep HAL_SMBUS_STATE_LISTEN if set */
+ hsmbus->PreviousState = HAL_SMBUS_STATE_READY;
+ hsmbus->State = HAL_SMBUS_STATE_LISTEN;
+ }
+ }
+
+ /* Call the Error callback to prevent upper layer */
+ HAL_SMBUS_ErrorCallback(hsmbus);
+ }
+}
+
+/**
+ * @brief Master Tx Transfer completed callbacks.
+ * @param hsmbus : Pointer to a SMBUS_HandleTypeDef structure that contains
+ * the configuration information for the specified SMBUS.
+ * @retval None
+ */
+ __weak void HAL_SMBUS_MasterTxCpltCallback(SMBUS_HandleTypeDef *hsmbus)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SMBUS_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Master Rx Transfer completed callbacks.
+ * @param hsmbus : Pointer to a SMBUS_HandleTypeDef structure that contains
+ * the configuration information for the specified SMBUS.
+ * @retval None
+ */
+__weak void HAL_SMBUS_MasterRxCpltCallback(SMBUS_HandleTypeDef *hsmbus)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SMBUS_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/** @brief Slave Tx Transfer completed callbacks.
+ * @param hsmbus : Pointer to a SMBUS_HandleTypeDef structure that contains
+ * the configuration information for the specified SMBUS.
+ * @retval None
+ */
+ __weak void HAL_SMBUS_SlaveTxCpltCallback(SMBUS_HandleTypeDef *hsmbus)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SMBUS_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Slave Rx Transfer completed callbacks.
+ * @param hsmbus : Pointer to a SMBUS_HandleTypeDef structure that contains
+ * the configuration information for the specified SMBUS.
+ * @retval None
+ */
+__weak void HAL_SMBUS_SlaveRxCpltCallback(SMBUS_HandleTypeDef *hsmbus)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SMBUS_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Slave Address Match callbacks.
+ * @param hsmbus : Pointer to a SMBUS_HandleTypeDef structure that contains
+ * the configuration information for the specified SMBUS.
+ * @param TransferDirection: Master request Transfer Direction (Write/Read)
+ * @param AddrMatchCode: Address Match Code
+ * @retval None
+ */
+__weak void HAL_SMBUS_SlaveAddrCallback(SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection, uint16_t AddrMatchCode)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SMBUS_SlaveAddrCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Listen Complete callbacks.
+ * @param hsmbus : Pointer to a SMBUS_HandleTypeDef structure that contains
+ * the configuration information for the specified SMBUS.
+ * @retval None
+ */
+__weak void HAL_SMBUS_SlaveListenCpltCallback(SMBUS_HandleTypeDef *hsmbus)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SMBUS_SlaveListenCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief SMBUS error callbacks.
+ * @param hsmbus : Pointer to a SMBUS_HandleTypeDef structure that contains
+ * the configuration information for the specified SMBUS.
+ * @retval None
+ */
+ __weak void HAL_SMBUS_ErrorCallback(SMBUS_HandleTypeDef *hsmbus)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SMBUS_ErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_Exported_Functions_Group3 Peripheral State and Errors functions
+ * @brief Peripheral State and Errors functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral State and Errors functions #####
+ ===============================================================================
+ [..]
+ This subsection permit to get in run-time the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Returns the SMBUS state.
+ * @param hsmbus : SMBUS handle
+ * @retval HAL state
+ */
+uint32_t HAL_SMBUS_GetState(SMBUS_HandleTypeDef *hsmbus)
+{
+ return hsmbus->State;
+}
+
+/**
+* @brief Return the SMBUS error code
+* @param hsmbus : pointer to a SMBUS_HandleTypeDef structure that contains
+ * the configuration information for the specified SMBUS.
+* @retval SMBUS Error Code
+*/
+uint32_t HAL_SMBUS_GetError(SMBUS_HandleTypeDef *hsmbus)
+{
+ return hsmbus->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup SMBUS_Private_Functions SMBUS Private Functions
+ * @brief Data transfers Private functions
+ * @{
+ */
+
+/**
+ * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode
+ * @param hsmbus : Pointer to a SMBUS_HandleTypeDef structure that contains
+ * the configuration information for the specified SMBUS.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef SMBUS_Master_ISR(SMBUS_HandleTypeDef *hsmbus)
+{
+ uint16_t DevAddress;
+
+ /* Process Locked */
+ __HAL_LOCK(hsmbus);
+
+ if(__HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_AF) != RESET)
+ {
+ /* Clear NACK Flag */
+ __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_AF);
+
+ /* Set corresponding Error Code */
+ /* No need to generate STOP, it is automatically done */
+ hsmbus->ErrorCode |= HAL_SMBUS_ERROR_ACKF;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsmbus);
+
+ /* Call the Error callback to prevent upper layer */
+ HAL_SMBUS_ErrorCallback(hsmbus);
+ }
+ else if(__HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_STOPF) != RESET)
+ {
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ if(hsmbus->State == HAL_SMBUS_STATE_MASTER_BUSY_TX)
+ {
+ /* Disable Interrupt */
+ SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_TX);
+
+ /* Clear STOP Flag */
+ __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ __HAL_SMBUS_RESET_CR2(hsmbus);
+
+ /* Flush remaining data in Fifo register in case of error occurs before TXEmpty */
+ /* Disable the selected SMBUS peripheral */
+ __HAL_SMBUS_DISABLE(hsmbus);
+
+ hsmbus->PreviousState = HAL_SMBUS_STATE_READY;
+ hsmbus->State = HAL_SMBUS_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsmbus);
+
+ /* REenable the selected SMBUS peripheral */
+ __HAL_SMBUS_ENABLE(hsmbus);
+
+ HAL_SMBUS_MasterTxCpltCallback(hsmbus);
+ }
+ else if(hsmbus->State == HAL_SMBUS_STATE_MASTER_BUSY_RX)
+ {
+ /* Disable Interrupt */
+ SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_RX);
+
+ /* Clear STOP Flag */
+ __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ __HAL_SMBUS_RESET_CR2(hsmbus);
+
+ hsmbus->PreviousState = HAL_SMBUS_STATE_READY;
+ hsmbus->State = HAL_SMBUS_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsmbus);
+
+ HAL_SMBUS_MasterRxCpltCallback(hsmbus);
+ }
+ }
+ else if(__HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_RXNE) != RESET)
+ {
+ /* Read data from RXDR */
+ (*hsmbus->pBuffPtr++) = hsmbus->Instance->RXDR;
+ hsmbus->XferSize--;
+ hsmbus->XferCount--;
+ }
+ else if(__HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_TXIS) != RESET)
+ {
+ /* Write data to TXDR */
+ hsmbus->Instance->TXDR = (*hsmbus->pBuffPtr++);
+ hsmbus->XferSize--;
+ hsmbus->XferCount--;
+ }
+ else if(__HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_TCR) != RESET)
+ {
+ if((hsmbus->XferSize == 0)&&(hsmbus->XferCount!=0))
+ {
+ DevAddress = (hsmbus->Instance->CR2 & I2C_CR2_SADD);
+
+ if(hsmbus->XferCount > MAX_NBYTE_SIZE)
+ {
+ SMBUS_TransferConfig(hsmbus, DevAddress, MAX_NBYTE_SIZE, (SMBUS_RELOAD_MODE | (hsmbus->XferOptions & SMBUS_SENDPEC_MODE)), SMBUS_NO_STARTSTOP);
+ hsmbus->XferSize = MAX_NBYTE_SIZE;
+ }
+ else
+ {
+ hsmbus->XferSize = hsmbus->XferCount;
+ SMBUS_TransferConfig(hsmbus,DevAddress,hsmbus->XferSize, hsmbus->XferOptions, SMBUS_NO_STARTSTOP);
+ /* If PEC mode is enable, size to transmit should be Size-1 byte, corresponding to PEC byte */
+ /* PEC byte is automatically sent by HW block, no need to manage it in Transmit process */
+ if(__HAL_SMBUS_GET_PEC_MODE(hsmbus) != RESET)
+ {
+ hsmbus->XferSize--;
+ hsmbus->XferCount--;
+ }
+ }
+ }
+ else if((hsmbus->XferSize == 0)&&(hsmbus->XferCount==0))
+ {
+ /* Call TxCpltCallback if no stop mode is set */
+ if(__HAL_SMBUS_GET_STOP_MODE(hsmbus) != SMBUS_AUTOEND_MODE)
+ {
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ if(hsmbus->State == HAL_SMBUS_STATE_MASTER_BUSY_TX)
+ {
+ /* Disable Interrupt */
+ SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_TX);
+ hsmbus->PreviousState = hsmbus->State;
+ hsmbus->State = HAL_SMBUS_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsmbus);
+
+ HAL_SMBUS_MasterTxCpltCallback(hsmbus);
+ }
+ else if(hsmbus->State == HAL_SMBUS_STATE_MASTER_BUSY_RX)
+ {
+ SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_RX);
+ hsmbus->PreviousState = hsmbus->State;
+ hsmbus->State = HAL_SMBUS_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsmbus);
+
+ HAL_SMBUS_MasterRxCpltCallback(hsmbus);
+ }
+ }
+ }
+ }
+ else if(__HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_TC) != RESET)
+ {
+ if(hsmbus->XferCount == 0)
+ {
+ /* Specific use case for Quick command */
+ if(hsmbus->pBuffPtr == NULL)
+ {
+ /* Generate a Stop command */
+ hsmbus->Instance->CR2 |= I2C_CR2_STOP;
+ }
+ /* Call TxCpltCallback if no stop mode is set */
+ else if(__HAL_SMBUS_GET_STOP_MODE(hsmbus) != SMBUS_AUTOEND_MODE)
+ {
+ /* No Generate Stop, to permit restart mode */
+ /* The stop will be done at the end of transfer, when SMBUS_AUTOEND_MODE enable */
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ if(hsmbus->State == HAL_SMBUS_STATE_MASTER_BUSY_TX)
+ {
+ /* Disable Interrupt */
+ SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_TX);
+ hsmbus->PreviousState = hsmbus->State;
+ hsmbus->State = HAL_SMBUS_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsmbus);
+
+ HAL_SMBUS_MasterTxCpltCallback(hsmbus);
+ }
+ else if(hsmbus->State == HAL_SMBUS_STATE_MASTER_BUSY_RX)
+ {
+ SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_RX);
+ hsmbus->PreviousState = hsmbus->State;
+ hsmbus->State = HAL_SMBUS_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsmbus);
+
+ HAL_SMBUS_MasterRxCpltCallback(hsmbus);
+ }
+ }
+ }
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsmbus);
+
+ return HAL_OK;
+}
+/**
+ * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode
+ * @param hsmbus : Pointer to a SMBUS_HandleTypeDef structure that contains
+ * the configuration information for the specified SMBUS.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef SMBUS_Slave_ISR(SMBUS_HandleTypeDef *hsmbus)
+{
+ uint8_t TransferDirection = 0;
+ uint16_t SlaveAddrCode = 0;
+
+ /* Process Locked */
+ __HAL_LOCK(hsmbus);
+
+ if(__HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_AF) != RESET)
+ {
+ /* Check that SMBUS transfer finished */
+ /* if yes, normal usecase, a NACK is sent by the HOST when Transfer is finished */
+ /* Mean XferCount == 0*/
+ /* So clear Flag NACKF only */
+ if(hsmbus->XferCount == 0)
+ {
+ /* Clear NACK Flag */
+ __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_AF);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsmbus);
+ }
+ else
+ {
+ /* if no, error usecase, a Non-Acknowledge of last Data is generated by the HOST*/
+ /* Clear NACK Flag */
+ __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_AF);
+
+ /* Set HAL State to "Idle" State, mean to LISTEN state */
+ /* So reset Slave Busy state */
+ hsmbus->PreviousState = hsmbus->State;
+ hsmbus->State &= ~((uint32_t)HAL_SMBUS_STATE_SLAVE_BUSY_TX);
+ hsmbus->State &= ~((uint32_t)HAL_SMBUS_STATE_SLAVE_BUSY_RX);
+
+ /* Disable RX/TX Interrupts, keep only ADDR Interrupt */
+ SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_RX | SMBUS_IT_TX);
+
+ /* Set ErrorCode corresponding to a Non-Acknowledge */
+ hsmbus->ErrorCode |= HAL_SMBUS_ERROR_ACKF;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsmbus);
+
+ /* Call the Error callback to prevent upper layer */
+ HAL_SMBUS_ErrorCallback(hsmbus);
+ }
+ }
+ else if(__HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_ADDR) != RESET)
+ {
+ TransferDirection = __HAL_SMBUS_GET_DIR(hsmbus);
+ SlaveAddrCode = __HAL_SMBUS_GET_ADDR_MATCH(hsmbus);
+
+ /* Disable ADDR interrupt to prevent multiple ADDRInterrupt*/
+ /* Other ADDRInterrupt will be treat in next Listen usecase */
+ __HAL_SMBUS_DISABLE_IT(hsmbus, SMBUS_IT_ADDRI);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsmbus);
+
+ /* Call Slave Addr callback */
+ HAL_SMBUS_SlaveAddrCallback(hsmbus, TransferDirection, SlaveAddrCode);
+ }
+ else if((__HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_RXNE) != RESET) || (__HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_TCR) != RESET))
+ {
+ if( (hsmbus->State & HAL_SMBUS_STATE_SLAVE_BUSY_RX) == HAL_SMBUS_STATE_SLAVE_BUSY_RX)
+ {
+ /* Read data from RXDR */
+ (*hsmbus->pBuffPtr++) = hsmbus->Instance->RXDR;
+ hsmbus->XferSize--;
+ hsmbus->XferCount--;
+
+ if(hsmbus->XferCount == 1)
+ {
+ /* Receive last Byte, can be PEC byte in case of PEC BYTE enabled */
+ /* or only the last Byte of Transfer */
+ /* So reset the RELOAD bit mode */
+ hsmbus->XferOptions &= ~SMBUS_RELOAD_MODE;
+ SMBUS_TransferConfig(hsmbus,0 ,1 , hsmbus->XferOptions, SMBUS_NO_STARTSTOP);
+ }
+ else if(hsmbus->XferCount == 0)
+ {
+ /* Last Byte is received, disable Interrupt */
+ SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_RX);
+
+ /* Remove HAL_SMBUS_STATE_SLAVE_BUSY_RX, keep only HAL_SMBUS_STATE_LISTEN */
+ hsmbus->PreviousState = hsmbus->State;
+ hsmbus->State &= ~((uint32_t)HAL_SMBUS_STATE_SLAVE_BUSY_RX);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsmbus);
+
+ /* Call the Rx complete callback to inform upper layer of the end of receive process */
+ HAL_SMBUS_SlaveRxCpltCallback(hsmbus);
+ }
+ else
+ {
+ /* Set Reload for next Bytes */
+ SMBUS_TransferConfig(hsmbus,0, 1, SMBUS_RELOAD_MODE | (hsmbus->XferOptions & SMBUS_SENDPEC_MODE), SMBUS_NO_STARTSTOP);
+
+ /* Ack last Byte Read */
+ hsmbus->Instance->CR2 &= ~I2C_CR2_NACK;
+ }
+ }
+ else if( (hsmbus->State & HAL_SMBUS_STATE_SLAVE_BUSY_TX) == HAL_SMBUS_STATE_SLAVE_BUSY_TX)
+ {
+ if((hsmbus->XferSize == 0)&&(hsmbus->XferCount!=0))
+ {
+ if(hsmbus->XferCount > MAX_NBYTE_SIZE)
+ {
+ SMBUS_TransferConfig(hsmbus, 0, MAX_NBYTE_SIZE, (SMBUS_RELOAD_MODE | (hsmbus->XferOptions & SMBUS_SENDPEC_MODE)), SMBUS_NO_STARTSTOP);
+ hsmbus->XferSize = MAX_NBYTE_SIZE;
+ }
+ else
+ {
+ hsmbus->XferSize = hsmbus->XferCount;
+ SMBUS_TransferConfig(hsmbus, 0, hsmbus->XferSize, hsmbus->XferOptions, SMBUS_NO_STARTSTOP);
+ /* If PEC mode is enable, size to transmit should be Size-1 byte, corresponding to PEC byte */
+ /* PEC byte is automatically sent by HW block, no need to manage it in Transmit process */
+ if(__HAL_SMBUS_GET_PEC_MODE(hsmbus) != RESET)
+ {
+ hsmbus->XferSize--;
+ hsmbus->XferCount--;
+ }
+ }
+ }
+ }
+ }
+ else if(__HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_TXIS) != RESET)
+ {
+ /* Write data to TXDR only if XferCount not reach "0" */
+ /* A TXIS flag can be set, during STOP treatment */
+ /* Check if all Datas have already been sent */
+ /* If it is the case, this last write in TXDR is not sent, correspond to a dummy TXIS event */
+ if(hsmbus->XferCount > 0)
+ {
+ /* Write data to TXDR */
+ hsmbus->Instance->TXDR = (*hsmbus->pBuffPtr++);
+ hsmbus->XferCount--;
+ hsmbus->XferSize--;
+ }
+
+ if(hsmbus->XferCount == 0)
+ {
+ /* Last Byte is Transmitted */
+ /* Remove HAL_SMBUS_STATE_SLAVE_BUSY_TX, keep only HAL_SMBUS_STATE_LISTEN */
+ SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_TX);
+ hsmbus->PreviousState = hsmbus->State;
+ hsmbus->State &= ~((uint32_t)HAL_SMBUS_STATE_SLAVE_BUSY_TX);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsmbus);
+
+ /* Call the Tx complete callback to inform upper layer of the end of transmit process */
+ HAL_SMBUS_SlaveTxCpltCallback(hsmbus);
+ }
+ }
+
+ /* Check if STOPF is set */
+ if(__HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_STOPF) != RESET)
+ {
+ if((hsmbus->State & HAL_SMBUS_STATE_LISTEN) == HAL_SMBUS_STATE_LISTEN)
+ {
+ /* Disable RX and TX Interrupts */
+ SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_RX | SMBUS_IT_TX);
+
+ /* Disable ADDR Interrupt */
+ SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_ADDR);
+
+ /* Disable Address Acknowledge */
+ hsmbus->Instance->CR2 |= I2C_CR2_NACK;
+
+ /* Clear Configuration Register 2 */
+ __HAL_SMBUS_RESET_CR2(hsmbus);
+
+ /* Clear STOP Flag */
+ __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_STOPF);
+
+ /* Clear ADDR flag */
+ __HAL_SMBUS_CLEAR_FLAG(hsmbus,SMBUS_FLAG_ADDR);
+
+ hsmbus->XferOptions = 0;
+ hsmbus->PreviousState = hsmbus->State;
+ hsmbus->State = HAL_SMBUS_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsmbus);
+
+ /* Call the Listen Complete callback, to prevent upper layer of the end of Listen usecase */
+ HAL_SMBUS_SlaveListenCpltCallback(hsmbus);
+ }
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsmbus);
+
+ return HAL_OK;
+}
+/**
+ * @brief Manage the enabling of Interrupts
+ * @param hsmbus : Pointer to a SMBUS_HandleTypeDef structure that contains
+ * the configuration information for the specified SMBUS.
+ * @param InterruptRequest : Value of @ref SMBUS_Interrupt_configuration_definition.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef SMBUS_Enable_IRQ(SMBUS_HandleTypeDef *hsmbus, uint16_t InterruptRequest)
+{
+ uint32_t tmpisr = 0;
+
+ if((InterruptRequest & SMBUS_IT_ALERT) == SMBUS_IT_ALERT)
+ {
+ /* Enable ERR interrupt */
+ tmpisr |= SMBUS_IT_ERRI;
+ }
+
+ if((InterruptRequest & SMBUS_IT_ADDR) == SMBUS_IT_ADDR)
+ {
+ /* Enable ADDR, STOP interrupt */
+ tmpisr |= SMBUS_IT_ADDRI | SMBUS_IT_STOPI | SMBUS_IT_NACKI | SMBUS_IT_ERRI;
+ }
+
+ if((InterruptRequest & SMBUS_IT_TX) == SMBUS_IT_TX)
+ {
+ /* Enable ERR, TC, STOP, NACK, RXI interrupt */
+ tmpisr |= SMBUS_IT_ERRI | SMBUS_IT_TCI | SMBUS_IT_STOPI | SMBUS_IT_NACKI | SMBUS_IT_TXI;
+ }
+
+ if((InterruptRequest & SMBUS_IT_RX) == SMBUS_IT_RX)
+ {
+ /* Enable ERR, TC, STOP, NACK, TXI interrupt */
+ tmpisr |= SMBUS_IT_ERRI | SMBUS_IT_TCI | SMBUS_IT_STOPI | SMBUS_IT_NACKI | SMBUS_IT_RXI;
+ }
+
+ /* Enable interrupts only at the end */
+ /* to avoid the risk of SMBUS interrupt handle execution before */
+ /* all interrupts requested done */
+ __HAL_SMBUS_ENABLE_IT(hsmbus, tmpisr);
+
+ return HAL_OK;
+}
+/**
+ * @brief Manage the disabling of Interrupts
+ * @param hsmbus : Pointer to a SMBUS_HandleTypeDef structure that contains
+ * the configuration information for the specified SMBUS.
+ * @param InterruptRequest : Value of @ref SMBUS_Interrupt_configuration_definition.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef SMBUS_Disable_IRQ(SMBUS_HandleTypeDef *hsmbus, uint16_t InterruptRequest)
+{
+ uint32_t tmpisr = 0;
+
+ if( ((InterruptRequest & SMBUS_IT_ALERT) == SMBUS_IT_ALERT) && (hsmbus->State == HAL_SMBUS_STATE_READY) )
+ {
+ /* Disable ERR interrupt */
+ tmpisr |= SMBUS_IT_ERRI;
+ }
+
+ if((InterruptRequest & SMBUS_IT_TX) == SMBUS_IT_TX)
+ {
+ /* Disable TC, STOP, NACK, TXI interrupt */
+ tmpisr |= SMBUS_IT_TCI | SMBUS_IT_TXI;
+
+ if((__HAL_SMBUS_GET_ALERT_ENABLED(hsmbus) == RESET)
+ && ((hsmbus->State & HAL_SMBUS_STATE_LISTEN) != HAL_SMBUS_STATE_LISTEN))
+ {
+ /* Disable ERR interrupt */
+ tmpisr |= SMBUS_IT_ERRI;
+ }
+
+ if((hsmbus->State & HAL_SMBUS_STATE_LISTEN) != HAL_SMBUS_STATE_LISTEN)
+ {
+ /* Disable STOPI, NACKI */
+ tmpisr |= SMBUS_IT_STOPI | SMBUS_IT_NACKI;
+ }
+ }
+
+ if((InterruptRequest & SMBUS_IT_RX) == SMBUS_IT_RX)
+ {
+ /* Disable TC, STOP, NACK, RXI interrupt */
+ tmpisr |= SMBUS_IT_TCI | SMBUS_IT_RXI;
+
+ if((__HAL_SMBUS_GET_ALERT_ENABLED(hsmbus) == RESET)
+ && ((hsmbus->State & HAL_SMBUS_STATE_LISTEN) != HAL_SMBUS_STATE_LISTEN))
+ {
+ /* Disable ERR interrupt */
+ tmpisr |= SMBUS_IT_ERRI;
+ }
+
+ if((hsmbus->State & HAL_SMBUS_STATE_LISTEN) != HAL_SMBUS_STATE_LISTEN)
+ {
+ /* Disable STOPI, NACKI */
+ tmpisr |= SMBUS_IT_STOPI | SMBUS_IT_NACKI;
+ }
+ }
+
+ if((InterruptRequest & SMBUS_IT_ADDR) == SMBUS_IT_ADDR)
+ {
+ /* Enable ADDR, STOP interrupt */
+ tmpisr |= SMBUS_IT_ADDRI | SMBUS_IT_STOPI | SMBUS_IT_NACKI;
+
+ if(__HAL_SMBUS_GET_ALERT_ENABLED(hsmbus) == RESET)
+ {
+ /* Disable ERR interrupt */
+ tmpisr |= SMBUS_IT_ERRI;
+ }
+ }
+
+ /* Disable interrupts only at the end */
+ /* to avoid a breaking situation like at "t" time */
+ /* all disable interrupts request are not done */
+ __HAL_SMBUS_DISABLE_IT(hsmbus, tmpisr);
+
+ return HAL_OK;
+}
+/**
+ * @brief This function handles SMBUS Communication Timeout.
+ * @param hsmbus : Pointer to a SMBUS_HandleTypeDef structure that contains
+ * the configuration information for the specified SMBUS.
+ * @param Flag: specifies the SMBUS flag to check.
+ * @param Status: The new Flag status (SET or RESET).
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef SMBUS_WaitOnFlagUntilTimeout(SMBUS_HandleTypeDef *hsmbus, uint32_t Flag, FlagStatus Status, uint32_t Timeout)
+{
+ uint32_t tickstart = HAL_GetTick();
+
+ /* Wait until flag is set */
+ if(Status == RESET)
+ {
+ while(__HAL_SMBUS_GET_FLAG(hsmbus, Flag) == RESET)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0) || ((HAL_GetTick() - tickstart) > Timeout))
+ {
+ hsmbus->PreviousState = hsmbus->State;
+ hsmbus->State= HAL_SMBUS_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsmbus);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ else
+ {
+ while(__HAL_SMBUS_GET_FLAG(hsmbus, Flag) != RESET)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0) || ((HAL_GetTick() - tickstart) > Timeout))
+ {
+ hsmbus->PreviousState = hsmbus->State;
+ hsmbus->State= HAL_SMBUS_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsmbus);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Handles SMBUSx communication when starting transfer or during transfer (TC or TCR flag are set).
+ * @param hsmbus: SMBUS handle.
+ * @param DevAddress: specifies the slave address to be programmed.
+ * @param Size: specifies the number of bytes to be programmed.
+ * This parameter must be a value between 0 and 255.
+ * @param Mode: new state of the SMBUS START condition generation.
+ * This parameter can be one or a combination of the following values:
+ * @arg SMBUS_NO_MODE: No specific mode enabled.
+ * @arg SMBUS_RELOAD_MODE: Enable Reload mode.
+ * @arg SMBUS_AUTOEND_MODE: Enable Automatic end mode.
+ * @arg SMBUS_SOFTEND_MODE: Enable Software end mode and Reload mode.
+ * @param Request: new state of the SMBUS START condition generation.
+ * This parameter can be one of the following values:
+ * @arg SMBUS_NO_STARTSTOP: Don't Generate stop and start condition.
+ * @arg SMBUS_GENERATE_STOP: Generate stop condition (Size should be set to 0).
+ * @arg SMBUS_GENERATE_START_READ: Generate Restart for read request.
+ * @arg SMBUS_GENERATE_START_WRITE: Generate Restart for write request.
+ * @retval None
+ */
+static void SMBUS_TransferConfig(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t Size, uint32_t Mode, uint32_t Request)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_SMBUS_ALL_INSTANCE(hsmbus->Instance));
+ assert_param(IS_SMBUS_TRANSFER_MODE(Mode));
+ assert_param(IS_SMBUS_TRANSFER_REQUEST(Request));
+
+ /* Get the CR2 register value */
+ tmpreg = hsmbus->Instance->CR2;
+
+ /* clear tmpreg specific bits */
+ tmpreg &= (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | I2C_CR2_RD_WRN | I2C_CR2_START | I2C_CR2_STOP | I2C_CR2_PECBYTE));
+
+ /* update tmpreg */
+ tmpreg |= (uint32_t)(((uint32_t)DevAddress & I2C_CR2_SADD) | (((uint32_t)Size << 16 ) & I2C_CR2_NBYTES) | \
+ (uint32_t)Mode | (uint32_t)Request);
+
+ /* update CR2 register */
+ hsmbus->Instance->CR2 = tmpreg;
+}
+/**
+ * @}
+ */
+
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/src/stm32f0xx_hal_spi.c b/f0/src/stm32f0xx_hal_spi.c
new file mode 100755
index 0000000000000000000000000000000000000000..0bb905755b2afb15a4ed66c15e379ec764bf7ecd
--- /dev/null
+++ b/f0/src/stm32f0xx_hal_spi.c
@@ -0,0 +1,2722 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_spi.c
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief SPI HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the SPI peripheral:
+ * + Initialization/de-initialization functions
+ * + I/O operation functions
+ * + Peripheral Control functions
+ * + Peripheral State functions
+ *
+ @verbatim
+===============================================================================
+ ##### How to use this driver #####
+ ===============================================================================
+ [..]
+ The SPI HAL driver can be used as follows:
+
+ (#) Declare a SPI_HandleTypeDef handle structure, for example:
+ SPI_HandleTypeDef hspi;
+
+ (#)Initialize the SPI low level resources by implement the HAL_SPI_MspInit ()API:
+ (##) Enable the SPIx interface clock
+ (##) SPI pins configuration
+ (+++) Enable the clock for the SPI GPIOs
+ (+++) Configure these SPI pins as alternate function push-pull
+ (##) NVIC configuration if you need to use interrupt process
+ (+++) Configure the SPIx interrupt priority
+ (+++) Enable the NVIC SPI IRQ handle
+ (##) DMA Configuration if you need to use DMA process
+ (+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive channel
+ (+++) Enable the DMAx interface clock using
+ (+++) Configure the DMA handle parameters
+ (+++) Configure the DMA Tx or Rx channel
+ (+++) Associate the initilalized hdma_tx handle to the hspi DMA Tx or Rx handle
+ (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx or Rx channel
+
+ (#) Program the Mode, BidirectionalMode , Data size, Baudrate Prescaler, NSS
+ management, Clock polarity and phase, FirstBit and CRC configuration in the hspi Init structure.
+
+ (#) Initialize the SPI registers by calling the HAL_SPI_Init() API:
+ (++) These APIs configures also the low level Hardware GPIO, CLOCK, CORTEX...etc)
+ by calling the customed HAL_SPI_MspInit(&hspi) API.
+
+ [..]
+ Using the HAL it is not possible to reach all supported SPI frequency with the differents SPI Modes,
+ the following table resume the max SPI frequency reached with data size 8bits/16bits:
+ +-----------------------------------------------------------------------------------------+
+ | | | 2Lines Fullduplex | 2Lines RxOnly | 1Line |
+ | Process | Tranfert mode |--------------------|--------------------|--------------------|
+ | | | Master | Slave | Master | Slave | Master | Slave |
+ |=========================================================================================|
+ | T | Polling | Fcpu/32 | Fcpu/32 | NA | NA | NA | NA |
+ | X |----------------|----------|---------|----------|---------|----------|---------|
+ | / | Interrupt | Fcpu/32 | Fcpu/32 | NA | NA | NA | NA |
+ | R |----------------|----------|---------|----------|---------|----------|---------|
+ | X | DMA | Fcpu/32 | Fcpu/16 | NA | NA | NA | NA |
+ |=========|================|==========|=========|==========|=========|==========|=========|
+ | | Polling | Fcpu/32 | Fcpu/16 | Fcpu/16 | Fcpu/16 | Fcpu/16 | Fcpu/16 |
+ | |----------------|----------|---------|----------|---------|----------|---------|
+ | R | Interrupt | Fcpu/16 | Fcpu/16 | Fcpu/16 | Fcpu/16 | Fcpu/16 | Fcpu/16 |
+ | X |----------------|----------|---------|----------|---------|----------|---------|
+ | | DMA | Fcpu/4 | Fcpu/8 | Fcpu/4 | Fcpu/4 | Fcpu/8 | Fcpu/16 |
+ |=========|================|==========|=========|==========|=========|==========|=========|
+ | | Polling | Fcpu/16 | Fcpu/16 | NA | NA | Fcpu/16 | Fcpu/16 |
+ | |----------------|----------|---------|----------|---------|----------|---------|
+ | T | Interrupt | Fcpu/32 | Fcpu/16 | NA | NA | Fcpu/16 | Fcpu/16 |
+ | X |----------------|----------|---------|----------|---------|----------|---------|
+ | | DMA | Fcpu/2 | Fcpu/16 | NA | NA | Fcpu/8 | Fcpu/16 |
+ +-----------------------------------------------------------------------------------------+
+ @note The max SPI frequency depend on SPI data size (4bits, 5bits,..., 8bits,...15bits, 16bits),
+ SPI mode(2 Lines fullduplex, 2 lines RxOnly, 1 line TX/RX) and Process mode (Polling, IT, DMA).
+ @note
+ (#) TX/RX processes are HAL_SPI_TransmitReceive(), HAL_SPI_TransmitReceive_IT() and HAL_SPI_TransmitReceive_DMA()
+ (#) RX processes are HAL_SPI_Receive(), HAL_SPI_Receive_IT() and HAL_SPI_Receive_DMA()
+ (#) TX processes are HAL_SPI_Transmit(), HAL_SPI_Transmit_IT() and HAL_SPI_Transmit_DMA()
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup SPI SPI HAL module driver
+ * @brief SPI HAL module driver
+ * @{
+ */
+#ifdef HAL_SPI_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+
+/** @defgroup SPI_Private_Constants SPI Private Constants
+ * @{
+ */
+#define SPI_DEFAULT_TIMEOUT 50
+#define SPI_FIFO_SIZE 4
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup SPI_Private_Functions SPI Private Functions
+ * @{
+ */
+
+static void SPI_DMATransmitCplt(DMA_HandleTypeDef *hdma);
+static void SPI_DMAReceiveCplt(DMA_HandleTypeDef *hdma);
+static void SPI_DMATransmitReceiveCplt(DMA_HandleTypeDef *hdma);
+static void SPI_DMAHalfTransmitCplt(DMA_HandleTypeDef *hdma);
+static void SPI_DMAHalfReceiveCplt(DMA_HandleTypeDef *hdma);
+static void SPI_DMAHalfTransmitReceiveCplt(DMA_HandleTypeDef *hdma);
+static void SPI_DMAError(DMA_HandleTypeDef *hdma);
+static HAL_StatusTypeDef SPI_WaitFlagStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Flag, uint32_t State, uint32_t Timeout);
+static HAL_StatusTypeDef SPI_WaitFifoStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Fifo, uint32_t State, uint32_t Timeout);
+static void SPI_TxISR_8BIT(struct __SPI_HandleTypeDef *hspi);
+static void SPI_TxISR_16BIT(struct __SPI_HandleTypeDef *hspi);
+static void SPI_RxISR_8BIT(struct __SPI_HandleTypeDef *hspi);
+static void SPI_RxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi);
+static void SPI_RxISR_16BIT(struct __SPI_HandleTypeDef *hspi);
+static void SPI_RxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi);
+static void SPI_2linesRxISR_8BIT(struct __SPI_HandleTypeDef *hspi);
+static void SPI_2linesRxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi);
+static void SPI_2linesTxISR_8BIT(struct __SPI_HandleTypeDef *hspi);
+static void SPI_2linesTxISR_16BIT(struct __SPI_HandleTypeDef *hspi);
+static void SPI_2linesRxISR_16BIT(struct __SPI_HandleTypeDef *hspi);
+static void SPI_2linesRxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi);
+static void SPI_CloseRxTx_ISR(SPI_HandleTypeDef *hspi);
+static void SPI_CloseRx_ISR(SPI_HandleTypeDef *hspi);
+static void SPI_CloseTx_ISR(SPI_HandleTypeDef *hspi);
+static HAL_StatusTypeDef SPI_EndRxTransaction(SPI_HandleTypeDef *hspi, uint32_t Timeout);
+/**
+ * @}
+ */
+
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup SPI_Exported_Functions SPI Exported Functions
+ * @{
+ */
+
+/** @defgroup SPI_Exported_Functions_Group1 Initialization/de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and Configuration functions #####
+ ===============================================================================
+ [..] This subsection provides a set of functions allowing to initialize and
+ de-initialiaze the SPIx peripheral:
+
+ (+) User must Implement HAL_SPI_MspInit() function in which he configures
+ all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ).
+
+ (+) Call the function HAL_SPI_Init() to configure the selected device with
+ the selected configuration:
+ (++) Mode
+ (++) Direction
+ (++) Data Size
+ (++) Clock Polarity and Phase
+ (++) NSS Management
+ (++) BaudRate Prescaler
+ (++) FirstBit
+ (++) TIMode
+ (++) CRC Calculation
+ (++) CRC Polynomial if CRC enabled
+ (++) CRC Length, used only with Data8 and Data16
+ (++) FIFO reception threshold
+
+ (+) Call the function HAL_SPI_DeInit() to restore the default configuration
+ of the selected SPIx periperal.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the SPI according to the specified parameters
+ * in the SPI_InitTypeDef and create the associated handle.
+ * @param hspi : pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi)
+{
+ uint32_t frxth;
+
+ /* Check the SPI handle allocation */
+ if(hspi == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_INSTANCE(hspi->Instance));
+ assert_param(IS_SPI_MODE(hspi->Init.Mode));
+ assert_param(IS_SPI_DIRECTION(hspi->Init.Direction));
+ assert_param(IS_SPI_DATASIZE(hspi->Init.DataSize));
+ assert_param(IS_SPI_CPOL(hspi->Init.CLKPolarity));
+ assert_param(IS_SPI_CPHA(hspi->Init.CLKPhase));
+ assert_param(IS_SPI_NSS(hspi->Init.NSS));
+ assert_param(IS_SPI_NSSP(hspi->Init.NSSPMode));
+ assert_param(IS_SPI_BAUDRATE_PRESCALER(hspi->Init.BaudRatePrescaler));
+ assert_param(IS_SPI_FIRST_BIT(hspi->Init.FirstBit));
+ assert_param(IS_SPI_TIMODE(hspi->Init.TIMode));
+ assert_param(IS_SPI_CRC_CALCULATION(hspi->Init.CRCCalculation));
+ assert_param(IS_SPI_CRC_POLYNOMIAL(hspi->Init.CRCPolynomial));
+ assert_param(IS_SPI_CRC_LENGTH(hspi->Init.CRCLength));
+
+ hspi->State = HAL_SPI_STATE_BUSY;
+
+ /* Init the low level hardware : GPIO, CLOCK, NVIC... */
+ HAL_SPI_MspInit(hspi);
+
+ /* Disable the selected SPI peripheral */
+ __HAL_SPI_DISABLE(hspi);
+
+ /* Align by default the rs fifo threshold on the data size */
+ if(hspi->Init.DataSize > SPI_DATASIZE_8BIT)
+ {
+ frxth = SPI_RXFIFO_THRESHOLD_HF;
+ }
+ else
+ {
+ frxth = SPI_RXFIFO_THRESHOLD_QF;
+ }
+
+ /* CRC calculation is valid only for 16Bit and 8 Bit */
+ if(( hspi->Init.DataSize != SPI_DATASIZE_16BIT ) && ( hspi->Init.DataSize != SPI_DATASIZE_8BIT ))
+ {
+ /* CRC must be disabled */
+ hspi->Init.CRCCalculation = SPI_CRCCALCULATION_DISABLED;
+ }
+
+ /* Align the CRC Length on the data size */
+ if( hspi->Init.CRCLength == SPI_CRC_LENGTH_DATASIZE)
+ {
+ /* CRC Lengtht aligned on the data size : value set by default */
+ if(hspi->Init.DataSize > SPI_DATASIZE_8BIT)
+ {
+ hspi->Init.CRCLength = SPI_CRC_LENGTH_16BIT;
+ }
+ else
+ {
+ hspi->Init.CRCLength = SPI_CRC_LENGTH_8BIT;
+ }
+ }
+
+ /*---------------------------- SPIx CR1 & CR2 Configuration ------------------------*/
+ /* Configure : SPI Mode, Communication Mode, Clock polarity and phase, NSS management,
+ Communication speed, First bit, CRC calculation state, CRC Length */
+ hspi->Instance->CR1 = (hspi->Init.Mode | hspi->Init.Direction |
+ hspi->Init.CLKPolarity | hspi->Init.CLKPhase | (hspi->Init.NSS & SPI_CR1_SSM) |
+ hspi->Init.BaudRatePrescaler | hspi->Init.FirstBit | hspi->Init.CRCCalculation);
+
+ if( hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT)
+ {
+ hspi->Instance->CR1|= SPI_CR1_CRCL;
+ }
+
+ /* Configure : NSS management */
+ /* Configure : Rx Fifo Threshold */
+ hspi->Instance->CR2 = (((hspi->Init.NSS >> 16) & SPI_CR2_SSOE) | hspi->Init.TIMode | hspi->Init.NSSPMode |
+ hspi->Init.DataSize ) | frxth;
+
+ /*---------------------------- SPIx CRCPOLY Configuration --------------------*/
+ /* Configure : CRC Polynomial */
+ hspi->Instance->CRCPR = hspi->Init.CRCPolynomial;
+
+ /* Activate the SPI mode (Make sure that I2SMOD bit in I2SCFGR register is reset) */
+ hspi->Instance->I2SCFGR &= (uint16_t)(~SPI_I2SCFGR_I2SMOD);
+
+ hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+ hspi->State= HAL_SPI_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the SPI peripheral
+ * @param hspi : pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_DeInit(SPI_HandleTypeDef *hspi)
+{
+ /* Check the SPI handle allocation */
+ if(hspi == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_INSTANCE(hspi->Instance));
+ hspi->State = HAL_SPI_STATE_BUSY;
+
+ /* check flag before the SPI disable */
+ SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FTLVL, SPI_FTLVL_EMPTY, SPI_DEFAULT_TIMEOUT);
+ SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, SPI_DEFAULT_TIMEOUT);
+ SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT);
+
+ /* Disable the SPI Peripheral Clock */
+ __HAL_SPI_DISABLE(hspi);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */
+ HAL_SPI_MspDeInit(hspi);
+
+ hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+ hspi->State = HAL_SPI_STATE_RESET;
+
+ __HAL_UNLOCK(hspi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief SPI MSP Init
+ * @param hspi : pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None.
+ */
+ __weak void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SPI_MspInit could be implenetd in the user file
+ */
+}
+
+/**
+ * @brief SPI MSP DeInit
+ * @param hspi : pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None.
+ */
+ __weak void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SPI_MspDeInit could be implenetd in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Exported_Functions_Group2 I/O operation functions
+ * @brief Data transfers functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ This subsection provides a set of functions allowing to manage the SPI
+ data transfers.
+
+ [..] The SPI supports master and slave mode :
+
+ (#) There are two modes of transfer:
+ (++) Blocking mode: The communication is performed in polling mode.
+ The HAL status of all data processing is returned by the same function
+ after finishing transfer.
+ (++) Non Blocking mode: The communication is performed using Interrupts
+ or DMA, These APIs return the HAL status.
+ The end of the data processing will be indicated through the
+ dedicated SPI IRQ when using Interrupt mode or the DMA IRQ when
+ using DMA mode.
+ The HAL_SPI_TxCpltCallback(), HAL_SPI_RxCpltCallback() and HAL_SPI_TxRxCpltCallback() user callbacks
+ will be executed respectivelly at the end of the transmit or Receive process
+ The HAL_SPI_ErrorCallback()user callback will be executed when a communication error is detected
+
+ (#) Blocking mode APIs are :
+ (++) HAL_SPI_Transmit()in 1Line (simplex) and 2Lines (full duplex) mode
+ (++) HAL_SPI_Receive() in 1Line (simplex) and 2Lines (full duplex) mode
+ (++) HAL_SPI_TransmitReceive() in full duplex mode
+
+ (#) Non Blocking mode APIs with Interrupt are :
+ (++) HAL_SPI_Transmit_IT()in 1Line (simplex) and 2Lines (full duplex) mode
+ (++) HAL_SPI_Receive_IT() in 1Line (simplex) and 2Lines (full duplex) mode
+ (++) HAL_SPI_TransmitReceive_IT()in full duplex mode
+ (++) HAL_SPI_IRQHandler()
+
+ (#) Non Blocking mode functions with DMA are :
+ (++) HAL_SPI_Transmit_DMA()in 1Line (simplex) and 2Lines (full duplex) mode
+ (++) HAL_SPI_Receive_DMA() in 1Line (simplex) and 2Lines (full duplex) mode
+ (++) HAL_SPI_TransmitReceie_DMA() in full duplex mode
+
+ (#) A set of Transfer Complete Callbacks are provided in Non Blocking mode:
+ (++) HAL_SPI_TxCpltCallback()
+ (++) HAL_SPI_RxCpltCallback()
+ (++) HAL_SPI_ErrorCallback()
+ (++) HAL_SPI_TxRxCpltCallback()
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Transmit an amount of data in blocking mode
+ * @param hspi : pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @param pData : pointer to data buffer
+ * @param Size : amount of data to be sent
+ * @param Timeout : Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = HAL_GetTick();
+ HAL_StatusTypeDef errorcode = HAL_OK;
+
+ assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction));
+
+ /* Process Locked */
+ __HAL_LOCK(hspi);
+
+ if(hspi->State != HAL_SPI_STATE_READY)
+ {
+ errorcode = HAL_BUSY;
+ goto error;
+ }
+
+ if((pData == NULL ) || (Size == 0))
+ {
+ errorcode = HAL_ERROR;
+ goto error;
+ }
+
+ /* Set the transaction information */
+ hspi->State = HAL_SPI_STATE_BUSY_TX;
+ hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+ hspi->pTxBuffPtr = pData;
+ hspi->TxXferSize = Size;
+ hspi->TxXferCount = Size;
+ hspi->pRxBuffPtr = (uint8_t*)NULL;
+ hspi->RxXferSize = 0;
+ hspi->RxXferCount = 0;
+
+ /* Configure communication direction : 1Line */
+ if(hspi->Init.Direction == SPI_DIRECTION_1LINE)
+ {
+ __HAL_SPI_1LINE_TX(hspi);
+ }
+
+ /* Reset CRC Calculation */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLED)
+ {
+ __HAL_SPI_RESET_CRC(hspi);
+ }
+
+ /* Check if the SPI is already enabled */
+ if((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE)
+ {
+ /* Enable SPI peripheral */
+ __HAL_SPI_ENABLE(hspi);
+ }
+
+ /* Transmit data in 16 Bit mode */
+ if(hspi->Init.DataSize > SPI_DATASIZE_8BIT)
+ {
+ /* Transmit data in 16 Bit mode */
+ while (hspi->TxXferCount > 0)
+ {
+ /* Wait until TXE flag is set to send data */
+ if((hspi->Instance->SR & SPI_FLAG_TXE) == SPI_FLAG_TXE)
+ {
+ hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr);
+ hspi->pTxBuffPtr += sizeof(uint16_t);
+ hspi->TxXferCount--;
+ }
+ else
+ {
+ /* Timeout management */
+ if((Timeout == 0) || ((Timeout != HAL_MAX_DELAY) && ((HAL_GetTick()-tickstart) >= Timeout)))
+ {
+ errorcode = HAL_TIMEOUT;
+ goto error;
+ }
+ }
+ }
+ }
+ /* Transmit data in 8 Bit mode */
+ else
+ {
+ while (hspi->TxXferCount > 0)
+ {
+ /* Wait until TXE flag is set to send data */
+ if((hspi->Instance->SR & SPI_FLAG_TXE) == SPI_FLAG_TXE)
+ {
+ if(hspi->TxXferCount > 1)
+ {
+ /* write on the data register in packaing mode */
+ hspi->Instance->DR = *((uint16_t*)hspi->pTxBuffPtr);
+ hspi->pTxBuffPtr += sizeof(uint16_t);
+ hspi->TxXferCount -= 2;
+ }
+ else
+ {
+ *((__IO uint8_t*)&hspi->Instance->DR) = (*hspi->pTxBuffPtr++);
+ hspi->TxXferCount--;
+ }
+ }
+ else
+ {
+ /* Timeout management */
+ if((Timeout == 0) || ((Timeout != HAL_MAX_DELAY) && ((HAL_GetTick()-tickstart) >= Timeout)))
+ {
+ errorcode = HAL_TIMEOUT;
+ goto error;
+ }
+ }
+ }
+ }
+
+ /* Enable CRC Transmission */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLED)
+ {
+ hspi->Instance->CR1|= SPI_CR1_CRCNEXT;
+ }
+
+ /* Clear OVERUN flag in 2 Lines communication mode because received is not read */
+ if(hspi->Init.Direction == SPI_DIRECTION_2LINES)
+ {
+ __HAL_SPI_CLEAR_OVRFLAG(hspi);
+ }
+
+ if(hspi->ErrorCode != HAL_SPI_ERROR_NONE)
+ {
+ errorcode = HAL_ERROR;
+ }
+
+error:
+ hspi->State = HAL_SPI_STATE_READY;
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspi);
+ return errorcode;
+}
+
+/**
+ * @brief Receive an amount of data in blocking mode
+ * @param hspi : pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @param pData : pointer to data buffer
+ * @param Size : amount of data to be sent
+ * @param Timeout : Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ __IO uint16_t tmpreg;
+ uint32_t tickstart = HAL_GetTick();
+ HAL_StatusTypeDef errorcode = HAL_OK;
+
+ if((hspi->Init.Mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES))
+ {
+ /* the receive process is not supported in 2Lines direction master mode */
+ /* in this case we call the transmitReceive process */
+ /* Process Locked */
+ return HAL_SPI_TransmitReceive(hspi,pData,pData,Size,Timeout);
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hspi);
+
+ if(hspi->State != HAL_SPI_STATE_READY)
+ {
+ errorcode = HAL_BUSY;
+ goto error;
+ }
+
+ if((pData == NULL ) || (Size == 0))
+ {
+ errorcode = HAL_ERROR;
+ goto error;
+ }
+
+ hspi->State = HAL_SPI_STATE_BUSY_RX;
+ hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+ hspi->pRxBuffPtr = pData;
+ hspi->RxXferSize = Size;
+ hspi->RxXferCount = Size;
+ hspi->pTxBuffPtr = (uint8_t*)NULL;
+ hspi->TxXferSize = 0;
+ hspi->TxXferCount = 0;
+
+ /* Reset CRC Calculation */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLED)
+ {
+ __HAL_SPI_RESET_CRC(hspi);
+ /* this is done to handle the CRCNEXT before the latest data */
+ hspi->RxXferCount--;
+ }
+
+ /* Set the Rx Fido thresold */
+ if(hspi->Init.DataSize > SPI_DATASIZE_8BIT)
+ {
+ /* set fiforxthresold according the reception data lenght: 16bit */
+ CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+ }
+ else
+ {
+ /* set fiforxthresold according the reception data lenght: 8bit */
+ SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+ }
+
+ /* Configure communication direction 1Line and enabled SPI if needed */
+ if(hspi->Init.Direction == SPI_DIRECTION_1LINE)
+ {
+ __HAL_SPI_1LINE_RX(hspi);
+ }
+
+ /* Check if the SPI is already enabled */
+ if((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE)
+ {
+ /* Enable SPI peripheral */
+ __HAL_SPI_ENABLE(hspi);
+ }
+
+ if(hspi->Init.DataSize <= SPI_DATASIZE_8BIT)
+ {
+ /* Transfert loop */
+ while(hspi->RxXferCount > 0)
+ {
+ /* Check the RXNE flag */
+ if((hspi->Instance->SR & SPI_FLAG_RXNE) == SPI_FLAG_RXNE)
+ {
+ /* read the received data */
+ (*hspi->pRxBuffPtr++)= *(__IO uint8_t *)&hspi->Instance->DR;
+ hspi->RxXferCount--;
+ }
+ else
+ {
+ /* Timeout manamgement */
+ if((Timeout == 0) || ((Timeout != HAL_MAX_DELAY) && ((HAL_GetTick()-tickstart) >= Timeout)))
+ {
+ errorcode = HAL_TIMEOUT;
+ goto error;
+ }
+ }
+ }
+ }
+ else
+ {
+ /* Transfert loop */
+ while(hspi->RxXferCount > 0)
+ {
+ /* Check the RXNE flag */
+ if((hspi->Instance->SR & SPI_FLAG_RXNE) == SPI_FLAG_RXNE)
+ {
+ *((uint16_t*)hspi->pRxBuffPtr) = hspi->Instance->DR;
+ hspi->pRxBuffPtr += sizeof(uint16_t);
+ hspi->RxXferCount--;
+ }
+ else
+ {
+ /* Timeout mamangement */
+ if((Timeout == 0) || ((Timeout != HAL_MAX_DELAY) && ((HAL_GetTick()-tickstart) >= Timeout)))
+ {
+ errorcode = HAL_TIMEOUT;
+ goto error;
+ }
+ }
+ }
+ }
+
+ /* Handle the CRC Transmission */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLED)
+ {
+ /* freeze the CRC before the latest data */
+ hspi->Instance->CR1|= SPI_CR1_CRCNEXT;
+
+ /* Read the latest data */
+ if(SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SPI_FLAG_RXNE, Timeout) != HAL_OK)
+ {
+ errorcode = HAL_TIMEOUT;
+ goto error;
+ }
+
+ /* Receive last data in 16 Bit mode */
+ if(hspi->Init.DataSize > SPI_DATASIZE_8BIT)
+ {
+ *((uint16_t*)hspi->pRxBuffPtr) = hspi->Instance->DR;
+ }
+ /* Receive last data in 8 Bit mode */
+ else
+ {
+ *hspi->pRxBuffPtr = *(__IO uint8_t *)&hspi->Instance->DR;
+ }
+
+ /* Wait until TXE flag */
+ if(SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SPI_FLAG_RXNE, Timeout) != HAL_OK)
+ {
+ /* Flag Error*/
+ hspi->ErrorCode|= HAL_SPI_ERROR_FLAG;
+ }
+
+ if(hspi->Init.DataSize == SPI_DATASIZE_16BIT)
+ {
+ tmpreg = hspi->Instance->DR;
+ UNUSED(tmpreg);
+ }
+ else
+ {
+ tmpreg = *(__IO uint8_t *)&hspi->Instance->DR;
+ UNUSED(tmpreg);
+ if((hspi->Init.DataSize == SPI_DATASIZE_8BIT) && (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT))
+ {
+ if(SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SPI_FLAG_RXNE, Timeout) != HAL_OK)
+ {
+ /* Erreur on the CRC reception */
+ hspi->ErrorCode|= HAL_SPI_ERROR_FLAG;
+ }
+ tmpreg = *(__IO uint8_t *)&hspi->Instance->DR;
+ UNUSED(tmpreg);
+ }
+ }
+ }
+
+ /* Check the end of the transaction */
+ if(SPI_EndRxTransaction(hspi,Timeout) != HAL_OK)
+ {
+ errorcode = HAL_TIMEOUT;
+ goto error;
+ }
+
+ /* Check if CRC error occurred */
+ if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET)
+ {
+ hspi->ErrorCode|= HAL_SPI_ERROR_CRC;
+ __HAL_SPI_CLEAR_CRCERRFLAG(hspi);
+ }
+
+ if(hspi->ErrorCode != HAL_SPI_ERROR_NONE)
+ {
+ errorcode = HAL_ERROR;
+ }
+
+error :
+ hspi->State = HAL_SPI_STATE_READY;
+ __HAL_UNLOCK(hspi);
+ return errorcode;
+}
+
+/**
+ * @brief Transmit and Receive an amount of data in blocking mode
+ * @param hspi : pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @param pTxData : pointer to transmission data buffer
+ * @param pRxData : pointer to reception data buffer to be
+ * @param Size : amount of data to be sent
+ * @param Timeout : Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout)
+{
+__IO uint16_t tmpreg;
+ uint32_t tickstart = HAL_GetTick();
+ HAL_StatusTypeDef errorcode = HAL_OK;
+
+ assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction));
+ assert_param(pTxData != NULL);
+
+ /* Process Locked */
+ __HAL_LOCK(hspi);
+
+ if(hspi->State != HAL_SPI_STATE_READY)
+ {
+ errorcode = HAL_BUSY;
+ goto error;
+ }
+
+ if((pTxData == NULL) || (pRxData == NULL) || (Size == 0))
+ {
+ errorcode = HAL_ERROR;
+ goto error;
+ }
+
+ hspi->State = HAL_SPI_STATE_BUSY_TX_RX;
+ hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+ hspi->pRxBuffPtr = pRxData;
+ hspi->RxXferCount = Size;
+ hspi->RxXferSize = Size;
+ hspi->pTxBuffPtr = pTxData;
+ hspi->TxXferCount = Size;
+ hspi->TxXferSize = Size;
+
+ /* Reset CRC Calculation */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLED)
+ {
+ __HAL_SPI_RESET_CRC(hspi);
+ }
+
+ /* Set the Rx Fido threshold */
+ if((hspi->Init.DataSize > SPI_DATASIZE_8BIT) || (hspi->RxXferCount > 1))
+ {
+ /* set fiforxthreshold according the reception data lenght: 16bit */
+ CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+ }
+ else
+ {
+ /* set fiforxthreshold according the reception data lenght: 8bit */
+ SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+ }
+
+ /* Check if the SPI is already enabled */
+ if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE)
+ {
+ /* Enable SPI peripheral */
+ __HAL_SPI_ENABLE(hspi);
+ }
+
+ /* Transmit and Receive data in 16 Bit mode */
+ if(hspi->Init.DataSize > SPI_DATASIZE_8BIT)
+ {
+ while ((hspi->TxXferCount > 0 ) || (hspi->RxXferCount > 0))
+ {
+ /* Check TXE flag */
+ if((hspi->TxXferCount > 0) && ((hspi->Instance->SR & SPI_FLAG_TXE) == SPI_FLAG_TXE))
+ {
+ hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr);
+ hspi->pTxBuffPtr += sizeof(uint16_t);
+ hspi->TxXferCount--;
+
+ /* Enable CRC Transmission */
+ if((hspi->TxXferCount == 0) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLED))
+ {
+ hspi->Instance->CR1|= SPI_CR1_CRCNEXT;
+ }
+ }
+
+ /* Check RXNE flag */
+ if((hspi->RxXferCount > 0) && ((hspi->Instance->SR & SPI_FLAG_RXNE) == SPI_FLAG_RXNE))
+ {
+ *((uint16_t *)hspi->pRxBuffPtr) = hspi->Instance->DR;
+ hspi->pRxBuffPtr += sizeof(uint16_t);
+ hspi->RxXferCount--;
+ }
+ if((Timeout != HAL_MAX_DELAY) && ((HAL_GetTick()-tickstart) >= Timeout))
+ {
+ errorcode = HAL_TIMEOUT;
+ goto error;
+ }
+ }
+ }
+ /* Transmit and Receive data in 8 Bit mode */
+ else
+ {
+ while((hspi->TxXferCount > 0) || (hspi->RxXferCount > 0))
+ {
+ /* check TXE flag */
+ if((hspi->TxXferCount > 0) && ((hspi->Instance->SR & SPI_FLAG_TXE) == SPI_FLAG_TXE))
+ {
+ if(hspi->TxXferCount > 1)
+ {
+ hspi->Instance->DR = *((uint16_t*)hspi->pTxBuffPtr);
+ hspi->pTxBuffPtr += sizeof(uint16_t);
+ hspi->TxXferCount -= 2;
+ }
+ else
+ {
+ *(__IO uint8_t *)&hspi->Instance->DR = (*hspi->pTxBuffPtr++);
+ hspi->TxXferCount--;
+ }
+
+ /* Enable CRC Transmission */
+ if((hspi->TxXferCount == 0) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLED))
+ {
+ hspi->Instance->CR1 |= SPI_CR1_CRCNEXT;
+ }
+ }
+
+ /* Wait until RXNE flag is reset */
+ if((hspi->RxXferCount > 0) && ((hspi->Instance->SR & SPI_FLAG_RXNE) == SPI_FLAG_RXNE))
+ {
+ if(hspi->RxXferCount > 1)
+ {
+ *((uint16_t*)hspi->pRxBuffPtr) = hspi->Instance->DR;
+ hspi->pRxBuffPtr += sizeof(uint16_t);
+ hspi->RxXferCount -= 2;
+ if(hspi->RxXferCount <= 1)
+ {
+ /* set fiforxthresold before to switch on 8 bit data size */
+ SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+ }
+ }
+ else
+ {
+ (*hspi->pRxBuffPtr++) = *(__IO uint8_t *)&hspi->Instance->DR;
+ hspi->RxXferCount--;
+ }
+ }
+ if((Timeout != HAL_MAX_DELAY) && ((HAL_GetTick()-tickstart) >= Timeout))
+ {
+ errorcode = HAL_TIMEOUT;
+ goto error;
+ }
+ }
+ }
+
+ /* Read CRC from DR to close CRC calculation process */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLED)
+ {
+ /* Wait until TXE flag */
+ if(SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SPI_FLAG_RXNE, Timeout) != HAL_OK)
+ {
+ /* Erreur on the CRC reception */
+ hspi->ErrorCode|= HAL_SPI_ERROR_CRC;
+ }
+
+ if(hspi->Init.DataSize == SPI_DATASIZE_16BIT)
+ {
+ tmpreg = hspi->Instance->DR;
+ UNUSED(tmpreg);
+ }
+ else
+ {
+ tmpreg = *(__IO uint8_t *)&hspi->Instance->DR;
+ UNUSED(tmpreg);
+ if(hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT)
+ {
+ if(SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SPI_FLAG_RXNE, Timeout) != HAL_OK)
+ {
+ /* Erreur on the CRC reception */
+ hspi->ErrorCode|= HAL_SPI_ERROR_CRC;
+ }
+ tmpreg = *(__IO uint8_t *)&hspi->Instance->DR;
+ UNUSED(tmpreg);
+ }
+ }
+ }
+
+ /* Check if CRC error occurred */
+ if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET)
+ {
+ hspi->ErrorCode|= HAL_SPI_ERROR_CRC;
+ /* Clear CRC Flag */
+ __HAL_SPI_CLEAR_CRCERRFLAG(hspi);
+
+ errorcode = HAL_ERROR;
+ }
+
+ if(hspi->ErrorCode != HAL_SPI_ERROR_NONE)
+ {
+ errorcode = HAL_ERROR;
+ }
+
+error :
+ hspi->State = HAL_SPI_STATE_READY;
+ __HAL_UNLOCK(hspi);
+ return errorcode;
+}
+
+/**
+ * @brief Transmit an amount of data in no-blocking mode with Interrupt
+ * @param hspi : pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @param pData : pointer to data buffer
+ * @param Size : amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size)
+{
+ HAL_StatusTypeDef errorcode = HAL_OK;
+ assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction));
+
+ /* Process Locked */
+ __HAL_LOCK(hspi);
+
+ if((pData == NULL) || (Size == 0))
+ {
+ errorcode = HAL_ERROR;
+ goto error;
+ }
+
+ if(hspi->State != HAL_SPI_STATE_READY)
+ {
+ errorcode = HAL_BUSY;
+ goto error;
+ }
+
+ /* prepore the transfer */
+ hspi->State = HAL_SPI_STATE_BUSY_TX;
+ hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+ hspi->pTxBuffPtr = pData;
+ hspi->TxXferSize = Size;
+ hspi->TxXferCount = Size;
+ hspi->pRxBuffPtr = (uint8_t*)NULL;
+ hspi->RxXferSize = 0;
+ hspi->RxXferCount = 0;
+ hspi->RxISR = (void (*)(SPI_HandleTypeDef *))NULL;
+
+ /* Set the function for IT treatement */
+ if(hspi->Init.DataSize > SPI_DATASIZE_8BIT )
+ {
+ hspi->TxISR = SPI_TxISR_16BIT;
+ }
+ else
+ {
+ hspi->TxISR = SPI_TxISR_8BIT;
+ }
+
+ /* Configure communication direction : 1Line */
+ if(hspi->Init.Direction == SPI_DIRECTION_1LINE)
+ {
+ __HAL_SPI_1LINE_TX(hspi);
+ }
+
+ /* Reset CRC Calculation */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLED)
+ {
+ __HAL_SPI_RESET_CRC(hspi);
+ }
+
+ /* Enable TXE and ERR interrupt */
+ __HAL_SPI_ENABLE_IT(hspi,(SPI_IT_TXE));
+
+
+ /* Check if the SPI is already enabled */
+ if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE)
+ {
+ /* Enable SPI peripheral */
+ __HAL_SPI_ENABLE(hspi);
+ }
+
+error :
+ __HAL_UNLOCK(hspi);
+ return errorcode;
+}
+
+/**
+ * @brief Receive an amount of data in no-blocking mode with Interrupt
+ * @param hspi : pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @param pData : pointer to data buffer
+ * @param Size : amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size)
+{
+ HAL_StatusTypeDef errorcode = HAL_OK;
+
+ /* Process Locked */
+ __HAL_LOCK(hspi);
+
+ if(hspi->State != HAL_SPI_STATE_READY)
+ {
+ errorcode = HAL_BUSY;
+ goto error;
+ }
+ if((pData == NULL) || (Size == 0))
+ {
+ errorcode = HAL_ERROR;
+ goto error;
+ }
+
+ /* Configure communication */
+ hspi->State = HAL_SPI_STATE_BUSY_RX;
+ hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+ hspi->pRxBuffPtr = pData;
+ hspi->RxXferSize = Size;
+ hspi->RxXferCount = Size;
+ hspi->pTxBuffPtr = (uint8_t*)NULL;
+ hspi->TxXferSize = 0;
+ hspi->TxXferCount = 0;
+
+ if((hspi->Init.Mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES))
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspi);
+ /* the receive process is not supported in 2Lines direction master mode */
+ /* in this we call the transmitReceive process */
+ return HAL_SPI_TransmitReceive_IT(hspi,pData,pData,Size);
+ }
+
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLED)
+ {
+ hspi->CRCSize = 1;
+ if((hspi->Init.DataSize <= SPI_DATASIZE_8BIT) && (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT))
+ {
+ hspi->CRCSize = 2;
+ }
+ }
+ else
+ {
+ hspi->CRCSize = 0;
+ }
+
+ hspi->TxISR = (void (*)(SPI_HandleTypeDef *))NULL;
+ /* check the data size to adapt Rx threshold and the set the function for IT treatement */
+ if(hspi->Init.DataSize > SPI_DATASIZE_8BIT )
+ {
+ /* set fiforxthresold according the reception data lenght: 16 bit */
+ CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+ hspi->RxISR = SPI_RxISR_16BIT;
+ }
+ else
+ {
+ /* set fiforxthresold according the reception data lenght: 8 bit */
+ SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+ hspi->RxISR = SPI_RxISR_8BIT;
+ }
+
+ /* Configure communication direction : 1Line */
+ if(hspi->Init.Direction == SPI_DIRECTION_1LINE)
+ {
+ __HAL_SPI_1LINE_RX(hspi);
+ }
+
+ /* Reset CRC Calculation */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLED)
+ {
+ __HAL_SPI_RESET_CRC(hspi);
+ }
+
+ /* Enable TXE and ERR interrupt */
+ __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR));
+
+ /* Check if the SPI is already enabled */
+ if((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE)
+ {
+ /* Enable SPI peripheral */
+ __HAL_SPI_ENABLE(hspi);
+ }
+
+error :
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspi);
+ return errorcode;
+}
+
+/**
+ * @brief Transmit and Receive an amount of data in no-blocking mode with Interrupt
+ * @param hspi : pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @param pTxData : pointer to transmission data buffer
+ * @param pRxData : pointer to reception data buffer to be
+ * @param Size : amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size)
+{
+ HAL_StatusTypeDef errorcode = HAL_OK;
+ assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction));
+
+ /* Process locked */
+ __HAL_LOCK(hspi);
+
+ if(!((hspi->State == HAL_SPI_STATE_READY) || \
+ ((hspi->Init.Mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES) && (hspi->State == HAL_SPI_STATE_BUSY_RX))))
+ {
+ errorcode = HAL_BUSY;
+ goto error;
+ }
+
+ if((pTxData == NULL ) || (pRxData == NULL ) || (Size == 0))
+ {
+ errorcode = HAL_ERROR;
+ goto error;
+ }
+
+ hspi->CRCSize = 0;
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLED)
+ {
+ hspi->CRCSize = 1;
+ if((hspi->Init.DataSize <= SPI_DATASIZE_8BIT) && (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT))
+ {
+ hspi->CRCSize = 2;
+ }
+ }
+
+ if(hspi->State != HAL_SPI_STATE_BUSY_RX)
+ {
+ hspi->State = HAL_SPI_STATE_BUSY_TX_RX;
+ }
+
+ hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+ hspi->pTxBuffPtr = pTxData;
+ hspi->TxXferSize = Size;
+ hspi->TxXferCount = Size;
+ hspi->pRxBuffPtr = pRxData;
+ hspi->RxXferSize = Size;
+ hspi->RxXferCount = Size;
+
+ /* Set the function for IT treatement */
+ if(hspi->Init.DataSize > SPI_DATASIZE_8BIT )
+ {
+ hspi->RxISR = SPI_2linesRxISR_16BIT;
+ hspi->TxISR = SPI_2linesTxISR_16BIT;
+ }
+ else
+ {
+ hspi->RxISR = SPI_2linesRxISR_8BIT;
+ hspi->TxISR = SPI_2linesTxISR_8BIT;
+ }
+
+ /* Reset CRC Calculation */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLED)
+ {
+ __HAL_SPI_RESET_CRC(hspi);
+ }
+
+ /* check if packing mode is enabled and if there is more than 2 data to receive */
+ if((hspi->Init.DataSize > SPI_DATASIZE_8BIT) || (hspi->RxXferCount >= 2))
+ {
+ /* set fiforxthresold according the reception data lenght: 16 bit */
+ CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+ }
+ else
+ {
+ /* set fiforxthresold according the reception data lenght: 8 bit */
+ SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+ }
+
+ /* Enable TXE, RXNE and ERR interrupt */
+ __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR));
+
+ /* Check if the SPI is already enabled */
+ if((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE)
+ {
+ /* Enable SPI peripheral */
+ __HAL_SPI_ENABLE(hspi);
+ }
+
+error :
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspi);
+ return errorcode;
+}
+
+/**
+ * @brief Transmit an amount of data in no-blocking mode with DMA
+ * @param hspi : pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @param pData : pointer to data buffer
+ * @param Size : amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size)
+{
+ HAL_StatusTypeDef errorcode = HAL_OK;
+ assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction));
+
+ /* Process Locked */
+ __HAL_LOCK(hspi);
+
+ if(hspi->State != HAL_SPI_STATE_READY)
+ {
+ errorcode = HAL_BUSY;
+ goto error;
+ }
+
+ if((pData == NULL) || (Size == 0))
+ {
+ errorcode = HAL_ERROR;
+ goto error;
+ }
+
+ hspi->State = HAL_SPI_STATE_BUSY_TX;
+ hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+ hspi->pTxBuffPtr = pData;
+ hspi->TxXferSize = Size;
+ hspi->TxXferCount = Size;
+ hspi->pRxBuffPtr = (uint8_t*)NULL;
+ hspi->RxXferSize = 0;
+ hspi->RxXferCount = 0;
+
+ /* Configure communication direction : 1Line */
+ if(hspi->Init.Direction == SPI_DIRECTION_1LINE)
+ {
+ __HAL_SPI_1LINE_TX(hspi);
+ }
+
+ /* Reset CRC Calculation */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLED)
+ {
+ __HAL_SPI_RESET_CRC(hspi);
+ }
+
+ /* Set the SPI TxDMA Half transfer complete callback */
+ hspi->hdmatx->XferHalfCpltCallback = SPI_DMAHalfTransmitCplt;
+
+ /* Set the SPI TxDMA transfert complete callback */
+ hspi->hdmatx->XferCpltCallback = SPI_DMATransmitCplt;
+
+ /* Set the DMA error callback */
+ hspi->hdmatx->XferErrorCallback = SPI_DMAError;
+
+ CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX);
+ /* packing mode is enabled only if the DMA setting is HALWORD */
+ if((hspi->Init.DataSize <= SPI_DATASIZE_8BIT) && (hspi->hdmatx->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD))
+ {
+ /* Check the even/odd of the data size + crc if enabled */
+ if((hspi->TxXferCount & 0x1) == 0)
+ {
+ CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX);
+ hspi->TxXferCount = (hspi->TxXferCount >> 1);
+ }
+ else
+ {
+ SET_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX);
+ hspi->TxXferCount = (hspi->TxXferCount >> 1) + 1;
+ }
+ }
+
+ /* Enable the Tx DMA channel */
+ HAL_DMA_Start_IT(hspi->hdmatx, (uint32_t)hspi->pTxBuffPtr, (uint32_t)&hspi->Instance->DR, hspi->TxXferCount);
+
+ /* Check if the SPI is already enabled */
+ if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE)
+ {
+ /* Enable SPI peripheral */
+ __HAL_SPI_ENABLE(hspi);
+ }
+
+ /* Enable Tx DMA Request */
+ SET_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN);
+
+error :
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspi);
+ return errorcode;
+}
+
+/**
+ * @brief Receive an amount of data in no-blocking mode with DMA
+ * @param hspi : pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @param pData : pointer to data buffer
+ * @param Size : amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size)
+{
+ HAL_StatusTypeDef errorcode = HAL_OK;
+
+ /* Process Locked */
+ __HAL_LOCK(hspi);
+
+ if(hspi->State != HAL_SPI_STATE_READY)
+ {
+ errorcode = HAL_BUSY;
+ goto error;
+ }
+
+ if((pData == NULL) || (Size == 0))
+ {
+ errorcode = HAL_ERROR;
+ goto error;
+ }
+
+ hspi->State = HAL_SPI_STATE_BUSY_RX;
+ hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+ hspi->pRxBuffPtr = pData;
+ hspi->RxXferSize = Size;
+ hspi->RxXferCount = Size;
+ hspi->pTxBuffPtr = (uint8_t*)NULL;
+ hspi->TxXferSize = 0;
+ hspi->TxXferCount = 0;
+
+ if((hspi->Init.Mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES))
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspi);
+ /* the receive process is not supported in 2Lines direction master mode */
+ /* in this case we call the transmitReceive process */
+ return HAL_SPI_TransmitReceive_DMA(hspi,pData,pData,Size);
+ }
+
+ /* Configure communication direction : 1Line */
+ if(hspi->Init.Direction == SPI_DIRECTION_1LINE)
+ {
+ __HAL_SPI_1LINE_RX(hspi);
+ }
+
+ /* Reset CRC Calculation */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLED)
+ {
+ __HAL_SPI_RESET_CRC(hspi);
+ }
+
+ /* packing mode management is enabled by the DMA settings */
+ if((hspi->Init.DataSize <= SPI_DATASIZE_8BIT) && (hspi->hdmarx->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD))
+ {
+ /* Restriction the DMA data received is not allowed in this mode */
+ errorcode = HAL_ERROR;
+ goto error;
+ }
+
+ CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMARX);
+ if( hspi->Init.DataSize > SPI_DATASIZE_8BIT)
+ {
+ /* set fiforxthresold according the reception data lenght: 16bit */
+ CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+ }
+ else
+ {
+ /* set fiforxthresold according the reception data lenght: 8bit */
+ SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+ }
+
+ /* Set the SPI RxDMA Half transfer complete callback */
+ hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfReceiveCplt;
+
+ /* Set the SPI Rx DMA transfert complete callback */
+ hspi->hdmarx->XferCpltCallback = SPI_DMAReceiveCplt;
+
+ /* Set the DMA error callback */
+ hspi->hdmarx->XferErrorCallback = SPI_DMAError;
+
+ /* Enable Rx DMA Request */
+ SET_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN);
+
+ /* Enable the Rx DMA channel */
+ HAL_DMA_Start_IT(hspi->hdmarx, (uint32_t)&hspi->Instance->DR, (uint32_t)hspi->pRxBuffPtr, hspi->RxXferCount);
+
+ /* Check if the SPI is already enabled */
+ if((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE)
+ {
+ /* Enable SPI peripheral */
+ __HAL_SPI_ENABLE(hspi);
+ }
+
+error:
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspi);
+ return errorcode;
+}
+
+/**
+ * @brief Transmit and Receive an amount of data in no-blocking mode with DMA
+ * @param hspi : pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @param pTxData : pointer to transmission data buffer
+ * @param pRxData : pointer to reception data buffer
+ * @param Size : amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size)
+{
+ HAL_StatusTypeDef errorcode = HAL_OK;
+ assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction));
+
+ /* Process locked */
+ __HAL_LOCK(hspi);
+
+ if(!((hspi->State == HAL_SPI_STATE_READY) ||
+ ((hspi->Init.Mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES) && (hspi->State == HAL_SPI_STATE_BUSY_RX))))
+ {
+ errorcode = HAL_BUSY;
+ goto error;
+ }
+
+ if((pTxData == NULL ) || (pRxData == NULL ) || (Size == 0))
+ {
+ errorcode = HAL_ERROR;
+ goto error;
+ }
+
+ /* check if the transmit Receive function is not called by a receive master */
+ if(hspi->State != HAL_SPI_STATE_BUSY_RX)
+ {
+ hspi->State = HAL_SPI_STATE_BUSY_TX_RX;
+ }
+
+ hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+ hspi->pTxBuffPtr = (uint8_t *)pTxData;
+ hspi->TxXferSize = Size;
+ hspi->TxXferCount = Size;
+ hspi->pRxBuffPtr = (uint8_t *)pRxData;
+ hspi->RxXferSize = Size;
+ hspi->RxXferCount = Size;
+
+ /* Reset CRC Calculation + increase the rxsize */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLED)
+ {
+ __HAL_SPI_RESET_CRC(hspi);
+ }
+
+ /* Reset the threshold bit */
+ CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX | SPI_CR2_LDMARX);
+
+ /* the packing mode management is enabled by the DMA settings according the spi data size */
+ if(hspi->Init.DataSize > SPI_DATASIZE_8BIT)
+ {
+ /* set fiforxthreshold according the reception data lenght: 16bit */
+ CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+ }
+ else
+ {
+ /* set fiforxthresold according the reception data lenght: 8bit */
+ SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+
+ if(hspi->hdmatx->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD)
+ {
+ if((hspi->TxXferSize & 0x1) == 0x0)
+ {
+ CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX);
+ hspi->TxXferCount = hspi->TxXferCount >> 1;
+ }
+ else
+ {
+ SET_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX);
+ hspi->TxXferCount = (hspi->TxXferCount >> 1) + 1;
+ }
+ }
+
+ if(hspi->hdmarx->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD)
+ {
+ /* set fiforxthresold according the reception data lenght: 16bit */
+ CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+
+ if((hspi->RxXferCount & 0x1) == 0x0 )
+ {
+ CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMARX);
+ hspi->RxXferCount = hspi->RxXferCount >> 1;
+ }
+ else
+ {
+ SET_BIT(hspi->Instance->CR2, SPI_CR2_LDMARX);
+ hspi->RxXferCount = (hspi->RxXferCount >> 1) + 1;
+ }
+ }
+ }
+
+ /* Set the SPI Rx DMA transfer complete callback if the transfer request is a
+ reception request (RXNE) */
+ if(hspi->State == HAL_SPI_STATE_BUSY_RX)
+ {
+ /* Set the SPI Rx DMA Half transfer complete callback */
+ hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfReceiveCplt;
+ hspi->hdmarx->XferCpltCallback = SPI_DMAReceiveCplt;
+ }
+ else
+ {
+ /* Set the SPI Rx DMA Half transfer complete callback */
+ hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfTransmitReceiveCplt;
+ hspi->hdmarx->XferCpltCallback = SPI_DMATransmitReceiveCplt;
+ }
+
+ /* Set the DMA error callback */
+ hspi->hdmarx->XferErrorCallback = SPI_DMAError;
+
+ /* Enable Rx DMA Request */
+ SET_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN);
+
+ /* Enable the Rx DMA channel */
+ HAL_DMA_Start_IT(hspi->hdmarx, (uint32_t)&hspi->Instance->DR, (uint32_t) hspi->pRxBuffPtr, hspi->RxXferCount);
+
+ /* Set the SPI Tx DMA transfer complete callback as NULL because the communication closing
+ is performed in DMA reception complete callback */
+ hspi->hdmatx->XferCpltCallback = (void (*)(DMA_HandleTypeDef *))NULL;
+
+ /* Set the DMA error callback */
+ hspi->hdmatx->XferErrorCallback = SPI_DMAError;
+
+ /* Enable the Tx DMA channel */
+ HAL_DMA_Start_IT(hspi->hdmatx, (uint32_t)hspi->pTxBuffPtr, (uint32_t)&hspi->Instance->DR, hspi->TxXferCount);
+
+ /* Check if the SPI is already enabled */
+ if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE)
+ {
+ /* Enable SPI peripheral */
+ __HAL_SPI_ENABLE(hspi);
+ }
+
+ /* Enable Tx DMA Request */
+ SET_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN);
+
+error :
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspi);
+ return errorcode;
+}
+
+/**
+ * @brief Pauses the DMA Transfer.
+ * @param hspi : pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for the specified SPI module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi)
+{
+ /* Process Locked */
+ __HAL_LOCK(hspi);
+
+ /* Disable the SPI DMA Tx & Rx requests */
+ CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Resumes the DMA Transfer.
+ * @param hspi : pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for the specified SPI module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi)
+{
+ /* Process Locked */
+ __HAL_LOCK(hspi);
+
+ /* Enable the SPI DMA Tx & Rx requests */
+ SET_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the DMA Transfer.
+ * @param hspi : pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for the specified SPI module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi)
+{
+ /* The Lock is not implemented on this API to allow the user application
+ to call the HAL SPI API under callbacks HAL_SPI_TxCpltCallback() or HAL_SPI_RxCpltCallback() or HAL_SPI_TxRxCpltCallback():
+ when calling HAL_DMA_Abort() API the DMA TX/RX Transfer complete interrupt is generated
+ and the correspond call back is executed HAL_SPI_TxCpltCallback() or HAL_SPI_RxCpltCallback() or HAL_SPI_TxRxCpltCallback()
+ */
+
+ /* Abort the SPI DMA tx channel */
+ if(hspi->hdmatx != NULL)
+ {
+ HAL_DMA_Abort(hspi->hdmatx);
+ }
+ /* Abort the SPI DMA rx channel */
+ if(hspi->hdmarx != NULL)
+ {
+ HAL_DMA_Abort(hspi->hdmarx);
+ }
+
+ /* Disable the SPI DMA Tx & Rx requests */
+ CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN);
+ hspi->State = HAL_SPI_STATE_READY;
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles SPI interrupt request.
+ * @param hspi : pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for the specified SPI module.
+ * @retval None.
+ */
+void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi)
+{
+ uint32_t itsource = hspi->Instance->CR2;
+ uint32_t itflag = hspi->Instance->SR;
+
+ /* SPI in mode Receiver ----------------------------------------------------*/
+ if(((itflag & SPI_FLAG_OVR) == RESET) &&
+ ((itflag & SPI_FLAG_RXNE) != RESET) && ((itsource & SPI_IT_RXNE) != RESET))
+ {
+ hspi->RxISR(hspi);
+ return;
+ }
+
+ /* SPI in mode Tramitter ---------------------------------------------------*/
+ if(((itflag & SPI_FLAG_TXE) != RESET) && ((itsource & SPI_IT_TXE) != RESET))
+ {
+ hspi->TxISR(hspi);
+ return;
+ }
+
+ /* SPI in Erreur Treatment ---------------------------------------------------*/
+ if((itflag & (SPI_FLAG_MODF | SPI_FLAG_OVR | SPI_FLAG_FRE)) != RESET)
+ {
+ /* SPI Overrun error interrupt occured -------------------------------------*/
+ if((itflag & SPI_FLAG_OVR) != RESET)
+ {
+ if(hspi->State != HAL_SPI_STATE_BUSY_TX)
+ {
+ hspi->ErrorCode |= HAL_SPI_ERROR_OVR;
+ __HAL_SPI_CLEAR_OVRFLAG(hspi);
+ }
+ else
+ {
+ return;
+ }
+ }
+
+ /* SPI Mode Fault error interrupt occured -------------------------------------*/
+ if((itflag & SPI_FLAG_MODF) != RESET)
+ {
+ hspi->ErrorCode |= HAL_SPI_ERROR_MODF;
+ __HAL_SPI_CLEAR_MODFFLAG(hspi);
+ }
+
+ /* SPI Frame error interrupt occured ----------------------------------------*/
+ if((itflag & SPI_FLAG_FRE) != RESET)
+ {
+ hspi->ErrorCode |= HAL_SPI_ERROR_FRE;
+ __HAL_SPI_CLEAR_FREFLAG(hspi);
+ }
+
+ __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE | SPI_IT_TXE | SPI_IT_ERR);
+ hspi->State = HAL_SPI_STATE_READY;
+ HAL_SPI_ErrorCallback(hspi);
+ return;
+ }
+}
+
+/**
+ * @brief Flush the RX fifo.
+ * @param hspi : pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for the specified SPI module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_FlushRxFifo(SPI_HandleTypeDef *hspi)
+{
+ __IO uint32_t tmpreg;
+ uint8_t count = 0;
+ while((hspi->Instance->SR & SPI_FLAG_FRLVL) != SPI_FRLVL_EMPTY)
+ {
+ count++;
+ tmpreg = hspi->Instance->DR;
+ UNUSED(tmpreg);
+ if(count == SPI_FIFO_SIZE)
+ {
+ return HAL_TIMEOUT;
+ }
+ };
+ return HAL_OK;
+}
+
+/**
+ * @brief Tx Transfer completed callbacks
+ * @param hspi : pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None.
+ */
+__weak void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SPI_TxCpltCallback could be implenetd in the user file
+ */
+}
+
+/**
+ * @brief Rx Transfer completed callbacks
+ * @param hspi : pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None.
+ */
+__weak void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SPI_RxCpltCallback could be implenetd in the user file
+ */
+}
+
+/**
+ * @brief Tx and Rx Transfer completed callbacks
+ * @param hspi : pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None.
+ */
+__weak void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SPI_TxRxCpltCallback could be implenetd in the user file
+ */
+}
+
+/**
+ * @brief Tx Half Transfer completed callbacks
+ * @param hspi : pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None.
+ */
+__weak void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SPI_TxHalfCpltCallback could be implenetd in the user file
+ */
+}
+
+/**
+ * @brief Rx Half Transfer completed callbacks
+ * @param hspi : pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None.
+ */
+__weak void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SPI_RxHalfCpltCallback() could be implenetd in the user file
+ */
+}
+
+/**
+ * @brief Tx and Rx Transfer completed callbacks
+ * @param hspi : pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None.
+ */
+__weak void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SPI_TxRxHalfCpltCallback() could be implenetd in the user file
+ */
+}
+
+/**
+ * @brief SPI error callbacks
+ * @param hspi : pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None.
+ */
+ __weak void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SPI_ErrorCallback could be implenetd in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Exported_Functions_Group3 Peripheral Control functions
+ * @brief SPI control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the SPI.
+ (+) HAL_SPI_GetState() API can be helpful to check in run-time the state of the SPI peripheral.
+ (+) HAL_SPI_GetError() check in run-time Errors occurring during communication
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the SPI state
+ * @param hspi : pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval SPI state
+ */
+HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi)
+{
+ return hspi->State;
+}
+
+/**
+ * @brief Return the SPI error code
+ * @param hspi : pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval SPI Error Code
+ */
+uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi)
+{
+ return hspi->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/** @addtogroup SPI_Private_Functions SPI Private Functions
+ * @brief Data transfers Private functions
+ * @{
+ */
+
+/**
+ * @brief DMA SPI transmit process complete callback
+ * @param hdma : pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None.
+ */
+static void SPI_DMATransmitCplt(DMA_HandleTypeDef *hdma)
+{
+ SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ if((hdma->Instance->CCR & DMA_CCR_CIRC) != DMA_CCR_CIRC)
+ {
+ /* Disable Tx DMA Request */
+ CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN);
+
+ /* Clear OVERUN flag in 2 Lines communication mode because received data is not read */
+ if(hspi->Init.Direction == SPI_DIRECTION_2LINES)
+ {
+ __HAL_SPI_CLEAR_OVRFLAG(hspi);
+ }
+
+ hspi->TxXferCount = 0;
+ hspi->State = HAL_SPI_STATE_READY;
+
+ if(hspi->ErrorCode != HAL_SPI_ERROR_NONE)
+ {
+ HAL_SPI_ErrorCallback(hspi);
+ return;
+ }
+ }
+ HAL_SPI_TxCpltCallback(hspi);
+}
+
+/**
+ * @brief DMA SPI receive process complete callback
+ * @param hdma : pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None.
+ */
+static void SPI_DMAReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+ SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ if((hdma->Instance->CCR & DMA_CCR_CIRC) != DMA_CCR_CIRC)
+ {
+ __IO uint16_t tmpreg;
+
+ /* CRC handling */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLED)
+ {
+ /* Wait until TXE flag */
+ if(SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SPI_FLAG_RXNE, SPI_DEFAULT_TIMEOUT) != HAL_OK)
+ {
+ /* Erreur on the CRC reception */
+ hspi->ErrorCode|= HAL_SPI_ERROR_CRC;
+ }
+ if(hspi->Init.DataSize > SPI_DATASIZE_8BIT)
+ {
+ tmpreg = hspi->Instance->DR;
+ UNUSED(tmpreg);
+ }
+ else
+ {
+ tmpreg = *(__IO uint8_t *)&hspi->Instance->DR;
+ UNUSED(tmpreg);
+ if(hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT)
+ {
+ if(SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SPI_FLAG_RXNE, SPI_DEFAULT_TIMEOUT) != HAL_OK)
+ {
+ /* Erreur on the CRC reception */
+ hspi->ErrorCode|= HAL_SPI_ERROR_CRC;
+ }
+ tmpreg = *(__IO uint8_t *)&hspi->Instance->DR;
+ UNUSED(tmpreg);
+ }
+ }
+ }
+
+ /* Disable Rx/Tx DMA Request (done by default to handle the case master rx direction 2 lines) */
+ CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN);
+
+ /* Check the end of the transaction */
+ SPI_EndRxTransaction(hspi,SPI_DEFAULT_TIMEOUT);
+
+ hspi->RxXferCount = 0;
+ hspi->State = HAL_SPI_STATE_READY;
+
+ /* Check if CRC error occurred */
+ if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET)
+ {
+ hspi->ErrorCode|= HAL_SPI_ERROR_CRC;
+ __HAL_SPI_CLEAR_CRCERRFLAG(hspi);
+ }
+
+ if(hspi->ErrorCode != HAL_SPI_ERROR_NONE)
+ {
+ HAL_SPI_ErrorCallback(hspi);
+ return;
+ }
+ }
+ HAL_SPI_RxCpltCallback(hspi);
+}
+
+/**
+ * @brief DMA SPI transmit receive process complete callback
+ * @param hdma : pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None.
+ */
+static void SPI_DMATransmitReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+ SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ if((hdma->Instance->CCR & DMA_CCR_CIRC) != DMA_CCR_CIRC)
+ {
+ __IO int16_t tmpreg;
+ /* CRC handling */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLED)
+ {
+ if((hspi->Init.DataSize == SPI_DATASIZE_8BIT) && (hspi->Init.CRCLength == SPI_CRC_LENGTH_8BIT))
+ {
+ if(SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_QUARTER_FULL, SPI_DEFAULT_TIMEOUT) != HAL_OK)
+ {
+ /* Erreur on the CRC reception */
+ hspi->ErrorCode|= HAL_SPI_ERROR_CRC;
+ }
+ tmpreg = *(__IO uint8_t *)&hspi->Instance->DR;
+ UNUSED(tmpreg);
+ }
+ else
+ {
+ if(SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_HALF_FULL, SPI_DEFAULT_TIMEOUT) != HAL_OK)
+ {
+ /* Erreur on the CRC reception */
+ hspi->ErrorCode|= HAL_SPI_ERROR_CRC;
+ }
+ tmpreg = hspi->Instance->DR;
+ UNUSED(tmpreg);
+ }
+ }
+
+ /* Disable Rx/Tx DMA Request */
+ CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN);
+
+
+ hspi->TxXferCount = 0;
+ hspi->RxXferCount = 0;
+ hspi->State = HAL_SPI_STATE_READY;
+
+ /* Check if CRC error occurred */
+ if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET)
+ {
+ hspi->ErrorCode = HAL_SPI_ERROR_CRC;
+ __HAL_SPI_CLEAR_CRCERRFLAG(hspi);
+ }
+
+ if(hspi->ErrorCode != HAL_SPI_ERROR_NONE)
+ {
+ HAL_SPI_ErrorCallback(hspi);
+ return;
+ }
+ }
+ HAL_SPI_TxRxCpltCallback(hspi);
+}
+
+/**
+ * @brief DMA SPI half transmit process complete callback
+ * @param hdma : pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None.
+ */
+static void SPI_DMAHalfTransmitCplt(DMA_HandleTypeDef *hdma)
+{
+ SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ HAL_SPI_TxHalfCpltCallback(hspi);
+}
+
+/**
+ * @brief DMA SPI half receive process complete callback
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None.
+ */
+static void SPI_DMAHalfReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+ SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ HAL_SPI_RxHalfCpltCallback(hspi);
+}
+
+/**
+ * @brief DMA SPI Half transmit receive process complete callback
+ * @param hdma : pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None.
+ */
+static void SPI_DMAHalfTransmitReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+ SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ HAL_SPI_TxRxHalfCpltCallback(hspi);
+}
+
+/**
+ * @brief DMA SPI communication error callback
+ * @param hdma : pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None.
+ */
+static void SPI_DMAError(DMA_HandleTypeDef *hdma)
+{
+ SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ /* Stop the disable DMA transfer on SPI side */
+ CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN);
+
+ hspi->ErrorCode|= HAL_SPI_ERROR_DMA;
+ hspi->State = HAL_SPI_STATE_READY;
+ HAL_SPI_ErrorCallback(hspi);
+}
+
+/**
+ * @brief Rx Handler for Transmit and Receive in Interrupt mode
+ * @param hspi : pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None.
+ */
+static void SPI_2linesRxISR_8BIT(struct __SPI_HandleTypeDef *hspi)
+{
+ /* Receive data in packing mode */
+ if(hspi->RxXferCount > 1)
+ {
+ *((uint16_t*)hspi->pRxBuffPtr) = hspi->Instance->DR;
+ hspi->pRxBuffPtr += sizeof(uint16_t);
+ hspi->RxXferCount -= 2;
+ if(hspi->RxXferCount == 1)
+ {
+ /* set fiforxthresold according the reception data lenght: 8bit */
+ SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+ }
+ }
+ /* Receive data in 8 Bit mode */
+ else
+ {
+ *hspi->pRxBuffPtr++ = *((__IO uint8_t *)&hspi->Instance->DR);
+ hspi->RxXferCount--;
+ }
+
+ /* check end of the reception */
+ if(hspi->RxXferCount == 0)
+ {
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLED)
+ {
+ hspi->RxISR = SPI_2linesRxISR_8BITCRC;
+ return;
+ }
+
+ /* Disable RXNE interrupt */
+ __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE);
+
+ if(hspi->TxXferCount == 0)
+ {
+ SPI_CloseRxTx_ISR(hspi);
+ }
+ }
+}
+
+/**
+ * @brief Rx Handler for Transmit and Receive in Interrupt mode
+ * @param hspi : pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None.
+ */
+static void SPI_2linesRxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi)
+{
+ __IO uint8_t tmpreg = *((__IO uint8_t *)&hspi->Instance->DR);
+ UNUSED(tmpreg);
+ hspi->CRCSize--;
+
+ /* check end of the reception */
+ if(hspi->CRCSize == 0)
+ {
+ /* Disable RXNE interrupt */
+ __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE);
+
+ if(hspi->TxXferCount == 0)
+ {
+ SPI_CloseRxTx_ISR(hspi);
+ }
+ }
+}
+
+/**
+ * @brief Tx Handler for Transmit and Receive in Interrupt mode
+ * @param hspi : pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None.
+ */
+static void SPI_2linesTxISR_8BIT(struct __SPI_HandleTypeDef *hspi)
+{
+ /* Transmit data in packing Bit mode */
+ if(hspi->TxXferCount >= 2)
+ {
+ hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr);
+ hspi->pTxBuffPtr += sizeof(uint16_t);
+ hspi->TxXferCount -= 2;
+ }
+ /* Transmit data in 8 Bit mode */
+ else
+ {
+ *(__IO uint8_t *)&hspi->Instance->DR = (*hspi->pTxBuffPtr++);
+ hspi->TxXferCount--;
+ }
+
+ /* check the end of the transmission */
+ if(hspi->TxXferCount == 0)
+ {
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLED)
+ {
+ hspi->Instance->CR1 |= SPI_CR1_CRCNEXT;
+ }
+ /* Disable TXE interrupt */
+ __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE);
+
+ if(hspi->RxXferCount == 0)
+ {
+ SPI_CloseRxTx_ISR(hspi);
+ }
+ }
+}
+
+/**
+ * @brief Rx 16Bit Handler for Transmit and Receive in Interrupt mode
+ * @param hspi : pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None.
+ */
+static void SPI_2linesRxISR_16BIT(struct __SPI_HandleTypeDef *hspi)
+{
+ /* Receive data in 16 Bit mode */
+ *((uint16_t*)hspi->pRxBuffPtr) = hspi->Instance->DR;
+ hspi->pRxBuffPtr += sizeof(uint16_t);
+ hspi->RxXferCount--;
+
+ if(hspi->RxXferCount == 0)
+ {
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLED)
+ {
+ hspi->RxISR = SPI_2linesRxISR_16BITCRC;
+ return;
+ }
+
+ /* Disable RXNE interrupt */
+ __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE);
+
+ if(hspi->TxXferCount == 0)
+ {
+ SPI_CloseRxTx_ISR(hspi);
+ }
+ }
+}
+
+/**
+ * @brief Manage the CRC 16bit receive for Transmit and Receive in Interrupt mode
+ * @param hspi : pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None.
+ */
+static void SPI_2linesRxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi)
+{
+ /* Receive data in 16 Bit mode */
+ __IO uint16_t tmpreg = hspi->Instance->DR;
+ UNUSED(tmpreg);
+
+ /* Disable RXNE interrupt */
+ __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE);
+
+ SPI_CloseRxTx_ISR(hspi);
+}
+
+/**
+ * @brief Tx Handler for Transmit and Receive in Interrupt mode
+ * @param hspi : pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None.
+ */
+static void SPI_2linesTxISR_16BIT(struct __SPI_HandleTypeDef *hspi)
+{
+ /* Transmit data in 16 Bit mode */
+ hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr);
+ hspi->pTxBuffPtr += sizeof(uint16_t);
+ hspi->TxXferCount--;
+
+ /* Enable CRC Transmission */
+ if(hspi->TxXferCount == 0)
+ {
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLED)
+ {
+ hspi->Instance->CR1 |= SPI_CR1_CRCNEXT;
+ }
+ /* Disable TXE interrupt */
+ __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE);
+
+ if(hspi->RxXferCount == 0)
+ {
+ SPI_CloseRxTx_ISR(hspi);
+ }
+ }
+}
+
+/**
+ * @brief Manage the CRC receive in Interrupt context
+ * @param hspi : pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None.
+ */
+static void SPI_RxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi)
+{
+ __IO uint8_t tmpreg = *((uint8_t*)&hspi->Instance->DR);
+ UNUSED(tmpreg);
+ hspi->CRCSize--;
+
+ if(hspi->CRCSize == 0)
+ {
+ SPI_CloseRx_ISR(hspi);
+ }
+}
+
+/**
+ * @brief Manage the recieve in Interrupt context
+ * @param hspi : pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None.
+ */
+static void SPI_RxISR_8BIT(struct __SPI_HandleTypeDef *hspi)
+{
+ *hspi->pRxBuffPtr++ = (*(__IO uint8_t *)&hspi->Instance->DR);
+ hspi->RxXferCount--;
+
+ /* Enable CRC Transmission */
+ if((hspi->RxXferCount == 1) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLED))
+ {
+ hspi->Instance->CR1 |= SPI_CR1_CRCNEXT;
+ }
+
+ if(hspi->RxXferCount == 0)
+ {
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLED)
+ {
+ hspi->RxISR = SPI_RxISR_8BITCRC;
+ return;
+ }
+ SPI_CloseRx_ISR(hspi);
+ }
+}
+
+/**
+ * @brief Manage the CRC 16bit recieve in Interrupt context
+ * @param hspi : pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None.
+ */
+static void SPI_RxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi)
+{
+ __IO uint16_t tmpreg;
+
+ tmpreg = hspi->Instance->DR;
+ UNUSED(tmpreg);
+
+ /* Disable RXNE and ERR interrupt */
+ __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR));
+
+ SPI_CloseRx_ISR(hspi);
+}
+
+/**
+ * @brief Manage the 16Bit recieve in Interrupt context
+ * @param hspi : pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None.
+ */
+static void SPI_RxISR_16BIT(struct __SPI_HandleTypeDef *hspi)
+{
+ *((uint16_t *)hspi->pRxBuffPtr) = hspi->Instance->DR;
+ hspi->pRxBuffPtr += sizeof(uint16_t);
+ hspi->RxXferCount--;
+
+ /* Enable CRC Transmission */
+ if((hspi->RxXferCount == 1) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLED))
+ {
+ hspi->Instance->CR1 |= SPI_CR1_CRCNEXT;
+ }
+
+ if(hspi->RxXferCount == 0)
+ {
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLED)
+ {
+ hspi->RxISR = SPI_RxISR_16BITCRC;
+ return;
+ }
+ SPI_CloseRx_ISR(hspi);
+ }
+}
+
+/**
+ * @brief Handle the data 8Bit transmit in Interrupt mode
+ * @param hspi : pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None.
+ */
+static void SPI_TxISR_8BIT(struct __SPI_HandleTypeDef *hspi)
+{
+ *(__IO uint8_t *)&hspi->Instance->DR = (*hspi->pTxBuffPtr++);
+ hspi->TxXferCount--;
+
+ if(hspi->TxXferCount == 0)
+ {
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLED)
+ {
+ /* Enable CRC Transmission */
+ hspi->Instance->CR1 |= SPI_CR1_CRCNEXT;
+ }
+ SPI_CloseTx_ISR(hspi);
+ }
+}
+
+/**
+ * @brief Handle the data 16Bit transmit in Interrupt mode
+ * @param hspi : pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None.
+ */
+static void SPI_TxISR_16BIT(struct __SPI_HandleTypeDef *hspi)
+{
+ /* Transmit data in 16 Bit mode */
+ hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr);
+ hspi->pTxBuffPtr += sizeof(uint16_t);
+ hspi->TxXferCount--;
+
+ if(hspi->TxXferCount == 0)
+ {
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLED)
+ {
+ /* Enable CRC Transmission */
+ hspi->Instance->CR1 |= SPI_CR1_CRCNEXT;
+ }
+ SPI_CloseTx_ISR(hspi);
+ }
+}
+
+/**
+ * @brief This function handles SPI Communication Timeout.
+ * @param hspi : pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @param Flag : SPI flag to check
+ * @param State : flag state to check
+ * @param Timeout : Timeout duration
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef SPI_WaitFlagStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Flag, uint32_t State, uint32_t Timeout)
+{
+ uint32_t tickstart = HAL_GetTick();
+
+ while((hspi->Instance->SR & Flag) != State)
+ {
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0) || ((HAL_GetTick()-tickstart) >= Timeout))
+ {
+ /* Disable the SPI and reset the CRC: the CRC value should be cleared
+ on both master and slave sides in order to resynchronize the master
+ and slave for their respective CRC calculation */
+
+ /* Disable TXE, RXNE and ERR interrupts for the interrupt process */
+ __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR));
+
+ if((hspi->Init.Mode == SPI_MODE_MASTER)&&((hspi->Init.Direction == SPI_DIRECTION_1LINE)||(hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY)))
+ {
+ /* Disable SPI peripheral */
+ __HAL_SPI_DISABLE(hspi);
+ }
+
+ /* Reset CRC Calculation */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLED)
+ {
+ __HAL_SPI_RESET_CRC(hspi);
+ }
+
+ hspi->State= HAL_SPI_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspi);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles SPI Communication Timeout.
+ * @param hspi : pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @param Fifo : Fifo to check
+ * @param State : Fifo state to check
+ * @param Timeout : Timeout duration
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef SPI_WaitFifoStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Fifo, uint32_t State, uint32_t Timeout)
+{
+ __IO uint8_t tmpreg;
+ uint32_t tickstart = HAL_GetTick();
+
+ while((hspi->Instance->SR & Fifo) != State)
+ {
+ if((Fifo == SPI_SR_FRLVL) && (State == SPI_FRLVL_EMPTY))
+ {
+ tmpreg = *((__IO uint8_t*)&hspi->Instance->DR);
+ UNUSED(tmpreg);
+ }
+
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0) || ((HAL_GetTick()-tickstart) >= Timeout))
+ {
+ /* Disable the SPI and reset the CRC: the CRC value should be cleared
+ on both master and slave sides in order to resynchronize the master
+ and slave for their respective CRC calculation */
+
+ /* Disable TXE, RXNE and ERR interrupts for the interrupt process */
+ __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR));
+
+ if((hspi->Init.Mode == SPI_MODE_MASTER)&&((hspi->Init.Direction == SPI_DIRECTION_1LINE)||(hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY)))
+ {
+ /* Disable SPI peripheral */
+ __HAL_SPI_DISABLE(hspi);
+ }
+
+ /* Reset CRC Calculation */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLED)
+ {
+ __HAL_SPI_RESET_CRC(hspi);
+ }
+
+ hspi->State = HAL_SPI_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspi);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles the check of the RX transaction complete.
+ * @param hspi : pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @param Timeout : Timeout duration
+ * @retval None.
+ */
+static HAL_StatusTypeDef SPI_EndRxTransaction(SPI_HandleTypeDef *hspi, uint32_t Timeout)
+{
+ if((hspi->Init.Mode == SPI_MODE_MASTER)&&((hspi->Init.Direction == SPI_DIRECTION_1LINE)||(hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY)))
+ {
+ /* Disable SPI peripheral */
+ __HAL_SPI_DISABLE(hspi);
+
+ if(SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, Timeout) != HAL_OK)
+ {
+ hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
+ return HAL_TIMEOUT;
+ }
+ if(SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, Timeout) != HAL_OK)
+ {
+ hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
+ return HAL_TIMEOUT;
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles the close of the RXTX transaction.
+ * @param hspi : pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None.
+ */
+static void SPI_CloseRxTx_ISR(SPI_HandleTypeDef *hspi)
+{
+ /* Disable ERR interrupt */
+ __HAL_SPI_DISABLE_IT(hspi, SPI_IT_ERR);
+
+ /* Check if CRC error occurred */
+ if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET)
+ {
+ hspi->State = HAL_SPI_STATE_READY;
+ hspi->ErrorCode|= HAL_SPI_ERROR_CRC;
+ __HAL_SPI_CLEAR_CRCERRFLAG(hspi);
+ HAL_SPI_ErrorCallback(hspi);
+ }
+ else
+ {
+ if(hspi->ErrorCode == HAL_SPI_ERROR_NONE)
+ {
+ if(hspi->State == HAL_SPI_STATE_BUSY_RX)
+ {
+ hspi->State = HAL_SPI_STATE_READY;
+ HAL_SPI_RxCpltCallback(hspi);
+ }
+ else
+ {
+ hspi->State = HAL_SPI_STATE_READY;
+ HAL_SPI_TxRxCpltCallback(hspi);
+ }
+ }
+ else
+ {
+ hspi->State = HAL_SPI_STATE_READY;
+ HAL_SPI_ErrorCallback(hspi);
+ }
+ }
+}
+
+/**
+ * @brief This function handles the close of the RX transaction.
+ * @param hspi : pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None.
+ */
+static void SPI_CloseRx_ISR(SPI_HandleTypeDef *hspi)
+{
+ /* Disable RXNE and ERR interrupt */
+ __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR));
+
+ /* Check the end of the transaction */
+ SPI_EndRxTransaction(hspi,SPI_DEFAULT_TIMEOUT);
+
+ hspi->State = HAL_SPI_STATE_READY;
+
+ /* Check if CRC error occurred */
+ if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET)
+ {
+ hspi->ErrorCode|= HAL_SPI_ERROR_CRC;
+ __HAL_SPI_CLEAR_CRCERRFLAG(hspi);
+ HAL_SPI_ErrorCallback(hspi);
+ }
+ else
+ {
+ if(hspi->ErrorCode == HAL_SPI_ERROR_NONE)
+ {
+ HAL_SPI_RxCpltCallback(hspi);
+ }
+ else
+ {
+ HAL_SPI_ErrorCallback(hspi);
+ }
+ }
+}
+
+/**
+ * @brief This function handles the close of the TX transaction.
+ * @param hspi : pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None.
+ */
+static void SPI_CloseTx_ISR(SPI_HandleTypeDef *hspi)
+{
+ /* Disable TXE and ERR interrupt */
+ __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_ERR));
+
+ /* Clear OVERUN flag in 2 Lines communication mode because received is not read */
+ if(hspi->Init.Direction == SPI_DIRECTION_2LINES)
+ {
+ __HAL_SPI_CLEAR_OVRFLAG(hspi);
+ }
+
+ hspi->State = HAL_SPI_STATE_READY;
+ if(hspi->ErrorCode != HAL_SPI_ERROR_NONE)
+ {
+ HAL_SPI_ErrorCallback(hspi);
+ }
+ else
+ {
+ HAL_SPI_TxCpltCallback(hspi);
+ }
+}
+
+/**
+ * @}
+ */
+
+#endif /* HAL_SPI_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/src/stm32f0xx_hal_tim.c b/f0/src/stm32f0xx_hal_tim.c
new file mode 100755
index 0000000000000000000000000000000000000000..4d2e41bad63f33735ed224cb8529bd254f0290d7
--- /dev/null
+++ b/f0/src/stm32f0xx_hal_tim.c
@@ -0,0 +1,5305 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_tim.c
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief TIM HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Timer (TIM) peripheral:
+ * + Time Base Initialization
+ * + Time Base Start
+ * + Time Base Start Interruption
+ * + Time Base Start DMA
+ * + Time Output Compare/PWM Initialization
+ * + Time Output Compare/PWM Channel Configuration
+ * + Time Output Compare/PWM Start
+ * + Time Output Compare/PWM Start Interruption
+ * + Time Output Compare/PWM Start DMA
+ * + Time Input Capture Initialization
+ * + Time Input Capture Channel Configuration
+ * + Time Input Capture Start
+ * + Time Input Capture Start Interruption
+ * + Time Input Capture Start DMA
+ * + Time One Pulse Initialization
+ * + Time One Pulse Channel Configuration
+ * + Time One Pulse Start
+ * + Time Encoder Interface Initialization
+ * + Time Encoder Interface Start
+ * + Time Encoder Interface Start Interruption
+ * + Time Encoder Interface Start DMA
+ * + Commutation Event configuration with Interruption and DMA
+ * + Time OCRef clear configuration
+ * + Time External Clock configuration
+ @verbatim
+ ==============================================================================
+ ##### TIMER Generic features #####
+ ==============================================================================
+ [..] The Timer features include:
+ (#) 16-bit up, down, up/down auto-reload counter.
+ (#) 16-bit programmable prescaler allowing dividing (also on the fly) the
+ counter clock frequency either by any factor between 1 and 65536.
+ (#) Up to 4 independent channels for:
+ (++) Input Capture
+ (++) Output Compare
+ (++) PWM generation (Edge and Center-aligned Mode)
+ (++) One-pulse mode output
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#) Initialize the TIM low level resources by implementing the following functions
+ depending from feature used :
+ (++) Time Base : HAL_TIM_Base_MspInit()
+ (++) Input Capture : HAL_TIM_IC_MspInit()
+ (++) Output Compare : HAL_TIM_OC_MspInit()
+ (++) PWM generation : HAL_TIM_PWM_MspInit()
+ (++) One-pulse mode output : HAL_TIM_OnePulse_MspInit()
+ (++) Encoder mode output : HAL_TIM_Encoder_MspInit()
+
+ (#) Initialize the TIM low level resources :
+ (##) Enable the TIM interface clock using __TIMx_CLK_ENABLE();
+ (##) TIM pins configuration
+ (+++) Enable the clock for the TIM GPIOs using the following function:
+ __GPIOx_CLK_ENABLE();
+ (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init();
+
+ (#) The external Clock can be configured, if needed (the default clock is the
+ internal clock from the APBx), using the following function:
+ HAL_TIM_ConfigClockSource, the clock configuration should be done before
+ any start function.
+
+ (#) Configure the TIM in the desired functioning mode using one of the
+ Initialization function of this driver:
+ (++) HAL_TIM_Base_Init: to use the Timer to generate a simple time base
+ (++) HAL_TIM_OC_Init and HAL_TIM_OC_ConfigChannel: to use the Timer to generate an
+ Output Compare signal.
+ (++) HAL_TIM_PWM_Init and HAL_TIM_PWM_ConfigChannel: to use the Timer to generate a
+ PWM signal.
+ (++) HAL_TIM_IC_Init and HAL_TIM_IC_ConfigChannel: to use the Timer to measure an
+ external signal.
+ (++) HAL_TIM_OnePulse_Init and HAL_TIM_OnePulse_ConfigChannel: to use the Timer
+ in One Pulse Mode.
+ (++) HAL_TIM_Encoder_Init: to use the Timer Encoder Interface.
+
+ (#) Activate the TIM peripheral using one of the start functions depending from the feature used:
+ (++) Time Base : HAL_TIM_Base_Start(), HAL_TIM_Base_Start_DMA(), HAL_TIM_Base_Start_IT()
+ (++) Input Capture : HAL_TIM_IC_Start(), HAL_TIM_IC_Start_DMA(), HAL_TIM_IC_Start_IT()
+ (++) Output Compare : HAL_TIM_OC_Start(), HAL_TIM_OC_Start_DMA(), HAL_TIM_OC_Start_IT()
+ (++) PWM generation : HAL_TIM_PWM_Start(), HAL_TIM_PWM_Start_DMA(), HAL_TIM_PWM_Start_IT()
+ (++) One-pulse mode output : HAL_TIM_OnePulse_Start(), HAL_TIM_OnePulse_Start_IT()
+ (++) Encoder mode output : HAL_TIM_Encoder_Start(), HAL_TIM_Encoder_Start_DMA(), HAL_TIM_Encoder_Start_IT().
+
+ (#) The DMA Burst is managed with the two following functions:
+ HAL_TIM_DMABurst_WriteStart()
+ HAL_TIM_DMABurst_ReadStart()
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup TIM TIM HAL module driver
+ * @brief TIM HAL module driver
+ * @{
+ */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+
+/** @defgroup TIM_Private_Functions TIM_Private_Functions
+ * @{
+ */
+static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter);
+static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter);
+static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter);
+static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter);
+static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter);
+static void TIM_ETR_SetConfig(TIM_TypeDef* TIMx, uint32_t TIM_ExtTRGPrescaler,
+ uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter);
+static void TIM_ITRx_SetConfig(TIM_TypeDef* TIMx, uint16_t InputTriggerSource);
+static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma);
+static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma);
+static void TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim,
+ TIM_SlaveConfigTypeDef * sSlaveConfig);
+
+/**
+ * @}
+ */
+
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup TIM_Exported_Functions TIM Exported Functions
+ * @{
+ */
+
+/** @defgroup TIM_Exported_Functions_Group1 Time Base functions
+ * @brief Time Base functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Time Base functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the TIM base.
+ (+) De-initialize the TIM base.
+ (+) Start the Time Base.
+ (+) Stop the Time Base.
+ (+) Start the Time Base and enable interrupt.
+ (+) Stop the Time Base and disable interrupt.
+ (+) Start the Time Base and enable DMA transfer.
+ (+) Stop the Time Base and disable DMA transfer.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM Time base Unit according to the specified
+ * parameters in the TIM_HandleTypeDef and create the associated handle.
+ * @param htim : TIM Base handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim)
+{
+ /* Check the TIM handle allocation */
+ if(htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+
+ if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Init the low level hardware : GPIO, CLOCK, NVIC */
+ HAL_TIM_Base_MspInit(htim);
+ }
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Set the Time Base configuration */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Initialize the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM Base peripheral
+ * @param htim : TIM Base handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+ HAL_TIM_Base_MspDeInit(htim);
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM Base MSP.
+ * @param htim : TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_Base_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM Base MSP.
+ * @param htim : TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_Base_MspDeInit could be implemented in the user file
+ */
+}
+
+
+/**
+ * @brief Starts the TIM Base generation.
+ * @param htim : TIM handle
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Change the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Base generation.
+ * @param htim : TIM handle
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Base generation in interrupt mode.
+ * @param htim : TIM handle
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ /* Enable the TIM Update interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_UPDATE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Base generation in interrupt mode.
+ * @param htim : TIM handle
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ /* Disable the TIM Update interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_UPDATE);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Base generation in DMA mode.
+ * @param htim : TIM handle
+ * @param pData : The source Buffer address.
+ * @param Length : The length of data to be transferred from memory to peripheral.
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMA_INSTANCE(htim->Instance));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if((pData == 0 ) && (Length > 0))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)pData, (uint32_t)&htim->Instance->ARR, Length);
+
+ /* Enable the TIM Update DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_UPDATE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Base generation in DMA mode.
+ * @param htim : TIM handle
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMA_INSTANCE(htim->Instance));
+
+ /* Disable the TIM Update DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_UPDATE);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group2 Time Output Compare functions
+ * @brief Time Output Compare functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Time Output Compare functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the TIM Output Compare.
+ (+) De-initialize the TIM Output Compare.
+ (+) Start the Time Output Compare.
+ (+) Stop the Time Output Compare.
+ (+) Start the Time Output Compare and enable interrupt.
+ (+) Stop the Time Output Compare and disable interrupt.
+ (+) Start the Time Output Compare and enable DMA transfer.
+ (+) Stop the Time Output Compare and disable DMA transfer.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM Output Compare according to the specified
+ * parameters in the TIM_HandleTypeDef and create the associated handle.
+ * @param htim : TIM Output Compare handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef* htim)
+{
+ /* Check the TIM handle allocation */
+ if(htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+
+ if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_OC_MspInit(htim);
+ }
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Init the base time for the Output Compare */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Initialize the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM peripheral
+ * @param htim : TIM Output Compare handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_OC_MspDeInit(htim);
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM Output Compare MSP.
+ * @param htim : TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_OC_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM Output Compare MSP.
+ * @param htim : TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_OC_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the TIM Output Compare signal generation.
+ * @param htim : TIM Output Compare handle
+ * @param Channel : TIM Channel to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ /* Enable the Output compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Output Compare signal generation.
+ * @param htim : TIM handle
+ * @param Channel : TIM Channel to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ /* Disable the Output compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Ouput */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Output Compare signal generation in interrupt mode.
+ * @param htim : TIM OC handle
+ * @param Channel : TIM Channel to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Enable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Enable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Enable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Enable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the Output compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Output Compare signal generation in interrupt mode.
+ * @param htim : TIM Output Compare handle
+ * @param Channel : TIM Channel to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Output compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Ouput */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Output Compare signal generation in DMA mode.
+ * @param htim : TIM Output Compare handle
+ * @param Channel : TIM Channel to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param pData : The source Buffer address.
+ * @param Length : The length of data to be transferred from memory to TIM peripheral
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if(((uint32_t)pData == 0 ) && (Length > 0))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length);
+
+ /* Enable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length);
+
+ /* Enable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length);
+
+ /* Enable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length);
+
+ /* Enable the TIM Capture/Compare 4 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the Output compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Output Compare signal generation in DMA mode.
+ * @param htim : TIM Output Compare handle
+ * @param Channel : TIM Channel to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Output compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Ouput */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group3 Time PWM functions
+ * @brief Time PWM functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Time PWM functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the TIM OPWM.
+ (+) De-initialize the TIM PWM.
+ (+) Start the Time PWM.
+ (+) Stop the Time PWM.
+ (+) Start the Time PWM and enable interrupt.
+ (+) Stop the Time PWM and disable interrupt.
+ (+) Start the Time PWM and enable DMA transfer.
+ (+) Stop the Time PWM and disable DMA transfer.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM PWM Time Base according to the specified
+ * parameters in the TIM_HandleTypeDef and create the associated handle.
+ * @param htim : TIM handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim)
+{
+ /* Check the TIM handle allocation */
+ if(htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+
+ if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_PWM_MspInit(htim);
+ }
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Init the base time for the PWM */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Initialize the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM peripheral
+ * @param htim : TIM handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_PWM_MspDeInit(htim);
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM PWM MSP.
+ * @param htim : TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_PWM_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM PWM MSP.
+ * @param htim : TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_PWM_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the PWM signal generation.
+ * @param htim : TIM handle
+ * @param Channel : TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ /* Enable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the PWM signal generation.
+ * @param htim : TIM handle
+ * @param Channel : TIM Channels to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ /* Disable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Ouput */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the PWM signal generation in interrupt mode.
+ * @param htim : TIM handle
+ * @param Channel : TIM Channel to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Enable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Enable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Enable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Enable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the PWM signal generation in interrupt mode.
+ * @param htim : TIM handle
+ * @param Channel : TIM Channels to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Ouput */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM PWM signal generation in DMA mode.
+ * @param htim : TIM handle
+ * @param Channel : TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param pData : The source Buffer address.
+ * @param Length : The length of data to be transferred from memory to TIM peripheral
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if(((uint32_t)pData == 0 ) && (Length > 0))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length);
+
+ /* Enable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length);
+
+ /* Enable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length);
+
+ /* Enable the TIM Output Capture/Compare 3 request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length);
+
+ /* Enable the TIM Capture/Compare 4 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM PWM signal generation in DMA mode.
+ * @param htim : TIM handle
+ * @param Channel : TIM Channels to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Ouput */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group4 Time Input Capture functions
+ * @brief Time Input Capture functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Time Input Capture functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the TIM Input Capture.
+ (+) De-initialize the TIM Input Capture.
+ (+) Start the Time Input Capture.
+ (+) Stop the Time Input Capture.
+ (+) Start the Time Input Capture and enable interrupt.
+ (+) Stop the Time Input Capture and disable interrupt.
+ (+) Start the Time Input Capture and enable DMA transfer.
+ (+) Stop the Time Input Capture and disable DMA transfer.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM Input Capture Time base according to the specified
+ * parameters in the TIM_HandleTypeDef and create the associated handle.
+ * @param htim : TIM Input Capture handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim)
+{
+ /* Check the TIM handle allocation */
+ if(htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+
+ if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_IC_MspInit(htim);
+ }
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Init the base time for the input capture */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Initialize the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM peripheral
+ * @param htim : TIM Input Capture handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_IC_MspDeInit(htim);
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM Input Capture MSP.
+ * @param htim : TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_IC_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM Input Capture MSP.
+ * @param htim : TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_IC_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the TIM Input Capture measurement.
+ * @param htim : TIM Input Capture handle
+ * @param Channel : TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_IC_Start (TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ /* Enable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Input Capture measurement.
+ * @param htim : TIM handle
+ * @param Channel : TIM Channels to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ /* Disable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Input Capture measurement in interrupt mode.
+ * @param htim : TIM Input Capture handle
+ * @param Channel : TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_IC_Start_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Enable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Enable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Enable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Enable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+ /* Enable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Input Capture measurement in interrupt mode.
+ * @param htim : TIM handle
+ * @param Channel : TIM Channels to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Input Capture measurement in DMA mode.
+ * @param htim : TIM Input Capture handle
+ * @param Channel : TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param pData : The destination Buffer address.
+ * @param Length : The length of data to be transferred from TIM peripheral to memory.
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+ assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if((pData == 0 ) && (Length > 0))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length);
+
+ /* Enable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData, Length);
+
+ /* Enable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->CCR3, (uint32_t)pData, Length);
+
+ /* Enable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->CCR4, (uint32_t)pData, Length);
+
+ /* Enable the TIM Capture/Compare 4 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Input Capture measurement in DMA mode.
+ * @param htim : TIM Input Capture handle
+ * @param Channel : TIM Channels to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+ assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group5 Time One Pulse functions
+ * @brief Time One Pulse functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Time One Pulse functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the TIM One Pulse.
+ (+) De-initialize the TIM One Pulse.
+ (+) Start the Time One Pulse.
+ (+) Stop the Time One Pulse.
+ (+) Start the Time One Pulse and enable interrupt.
+ (+) Stop the Time One Pulse and disable interrupt.
+ (+) Start the Time One Pulse and enable DMA transfer.
+ (+) Stop the Time One Pulse and disable DMA transfer.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM One Pulse Time Base according to the specified
+ * parameters in the TIM_HandleTypeDef and create the associated handle.
+ * @param htim : TIM OnePulse handle
+ * @param OnePulseMode : Select the One pulse mode.
+ * This parameter can be one of the following values:
+ * @arg TIM_OPMODE_SINGLE: Only one pulse will be generated.
+ * @arg TIM_OPMODE_REPETITIVE: Repetitive pulses wil be generated.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode)
+{
+ /* Check the TIM handle allocation */
+ if(htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+ assert_param(IS_TIM_OPM_MODE(OnePulseMode));
+
+ if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_OnePulse_MspInit(htim);
+ }
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Configure the Time base in the One Pulse Mode */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Reset the OPM Bit */
+ htim->Instance->CR1 &= ~TIM_CR1_OPM;
+
+ /* Configure the OPM Mode */
+ htim->Instance->CR1 |= OnePulseMode;
+
+ /* Initialize the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM One Pulse
+ * @param htim : TIM One Pulse handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+ HAL_TIM_OnePulse_MspDeInit(htim);
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM One Pulse MSP.
+ * @param htim : TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_OnePulse_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM One Pulse MSP.
+ * @param htim : TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_OnePulse_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the TIM One Pulse signal generation.
+ * @param htim : TIM One Pulse handle
+ * @param OutputChannel : TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ /* Enable the Capture compare and the Input Capture channels
+ (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
+ if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
+ if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
+ in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together
+
+ No need to enable the counter, it's enabled automatically by hardware
+ (the counter starts in response to a stimulus and generate a pulse */
+
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+
+ if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM One Pulse signal generation.
+ * @param htim : TIM One Pulse handle
+ * @param OutputChannel : TIM Channels to be disable
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ /* Disable the Capture compare and the Input Capture channels
+ (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
+ if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
+ if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
+ in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */
+
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+ if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Ouput */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM One Pulse signal generation in interrupt mode.
+ * @param htim : TIM One Pulse handle
+ * @param OutputChannel : TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ /* Enable the Capture compare and the Input Capture channels
+ (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
+ if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
+ if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
+ in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together
+
+ No need to enable the counter, it's enabled automatically by hardware
+ (the counter starts in response to a stimulus and generate a pulse */
+
+ /* Enable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+
+ /* Enable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+
+ if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM One Pulse signal generation in interrupt mode.
+ * @param htim : TIM One Pulse handle
+ * @param OutputChannel : TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ /* Disable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+
+ /* Disable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+
+ /* Disable the Capture compare and the Input Capture channels
+ (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
+ if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
+ if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
+ in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+ if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Ouput */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group6 Time Encoder functions
+ * @brief Time Encoder functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Time Encoder functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the TIM Encoder.
+ (+) De-initialize the TIM Encoder.
+ (+) Start the Time Encoder.
+ (+) Stop the Time Encoder.
+ (+) Start the Time Encoder and enable interrupt.
+ (+) Stop the Time Encoder and disable interrupt.
+ (+) Start the Time Encoder and enable DMA transfer.
+ (+) Stop the Time Encoder and disable DMA transfer.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM Encoder Interface and create the associated handle.
+ * @param htim : TIM Encoder Interface handle
+ * @param sConfig : TIM Encoder Interface configuration structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef* sConfig)
+{
+ uint32_t tmpsmcr = 0;
+ uint32_t tmpccmr1 = 0;
+ uint32_t tmpccer = 0;
+
+ /* Check the TIM handle allocation */
+ if(htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_ENCODER_MODE(sConfig->EncoderMode));
+ assert_param(IS_TIM_IC_SELECTION(sConfig->IC1Selection));
+ assert_param(IS_TIM_IC_SELECTION(sConfig->IC2Selection));
+ assert_param(IS_TIM_IC_POLARITY(sConfig->IC1Polarity));
+ assert_param(IS_TIM_IC_POLARITY(sConfig->IC2Polarity));
+ assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler));
+ assert_param(IS_TIM_IC_PRESCALER(sConfig->IC2Prescaler));
+ assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter));
+ assert_param(IS_TIM_IC_FILTER(sConfig->IC2Filter));
+
+ if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_Encoder_MspInit(htim);
+ }
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Reset the SMS bits */
+ htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+
+ /* Configure the Time base in the Encoder Mode */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = htim->Instance->SMCR;
+
+ /* Get the TIMx CCMR1 register value */
+ tmpccmr1 = htim->Instance->CCMR1;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = htim->Instance->CCER;
+
+ /* Set the encoder Mode */
+ tmpsmcr |= sConfig->EncoderMode;
+
+ /* Select the Capture Compare 1 and the Capture Compare 2 as input */
+ tmpccmr1 &= ~(TIM_CCMR1_CC1S | TIM_CCMR1_CC2S);
+ tmpccmr1 |= (sConfig->IC1Selection | (sConfig->IC2Selection << 8));
+
+ /* Set the the Capture Compare 1 and the Capture Compare 2 prescalers and filters */
+ tmpccmr1 &= ~(TIM_CCMR1_IC1PSC | TIM_CCMR1_IC2PSC);
+ tmpccmr1 &= ~(TIM_CCMR1_IC1F | TIM_CCMR1_IC2F);
+ tmpccmr1 |= sConfig->IC1Prescaler | (sConfig->IC2Prescaler << 8);
+ tmpccmr1 |= (sConfig->IC1Filter << 4) | (sConfig->IC2Filter << 12);
+
+ /* Set the TI1 and the TI2 Polarities */
+ tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC2P);
+ tmpccer &= ~(TIM_CCER_CC1NP | TIM_CCER_CC2NP);
+ tmpccer |= sConfig->IC1Polarity | (sConfig->IC2Polarity << 4);
+
+ /* Write to TIMx SMCR */
+ htim->Instance->SMCR = tmpsmcr;
+
+ /* Write to TIMx CCMR1 */
+ htim->Instance->CCMR1 = tmpccmr1;
+
+ /* Write to TIMx CCER */
+ htim->Instance->CCER = tmpccer;
+
+ /* Initialize the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief DeInitializes the TIM Encoder interface
+ * @param htim : TIM Encoder handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+ HAL_TIM_Encoder_MspDeInit(htim);
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM Encoder Interface MSP.
+ * @param htim : TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_Encoder_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM Encoder Interface MSP.
+ * @param htim : TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_Encoder_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the TIM Encoder Interface.
+ * @param htim : TIM Encoder Interface handle
+ * @param Channel : TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ /* Enable the encoder interface channels */
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ break;
+ }
+ case TIM_CHANNEL_2:
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+ break;
+ }
+ default :
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+ break;
+ }
+ }
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Encoder Interface.
+ * @param htim : TIM Encoder Interface handle
+ * @param Channel : TIM Channels to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ /* Disable the Input Capture channels 1 and 2
+ (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+ break;
+ }
+ case TIM_CHANNEL_2:
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+ break;
+ }
+ default :
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+ break;
+ }
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Encoder Interface in interrupt mode.
+ * @param htim : TIM Encoder Interface handle
+ * @param Channel : TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ /* Enable the encoder interface channels */
+ /* Enable the capture compare Interrupts 1 and/or 2 */
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ break;
+ }
+ case TIM_CHANNEL_2:
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ break;
+ }
+ default :
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ break;
+ }
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Encoder Interface in interrupt mode.
+ * @param htim : TIM Encoder Interface handle
+ * @param Channel : TIM Channels to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ /* Disable the Input Capture channels 1 and 2
+ (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */
+ if(Channel == TIM_CHANNEL_1)
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare Interrupts 1 */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ }
+ else if(Channel == TIM_CHANNEL_2)
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare Interrupts 2 */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+ else
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare Interrupts 1 and 2 */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Encoder Interface in DMA mode.
+ * @param htim : TIM Encoder Interface handle
+ * @param Channel : TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @param pData1 : The destination Buffer address for IC1.
+ * @param pData2 : The destination Buffer address for IC2.
+ * @param Length : The length of data to be transferred from TIM peripheral to memory.
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, uint32_t *pData2, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if((((pData1 == 0) || (pData2 == 0) )) && (Length > 0))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t )pData1, Length);
+
+ /* Enable the TIM Input Capture DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Enable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = HAL_TIM_DMAError;
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length);
+
+ /* Enable the TIM Input Capture DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Enable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+ }
+ break;
+
+ case TIM_CHANNEL_ALL:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, Length);
+
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Enable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+
+ /* Enable the TIM Input Capture DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+ /* Enable the TIM Input Capture DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ default:
+ break;
+ }
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Encoder Interface in DMA mode.
+ * @param htim : TIM Encoder Interface handle
+ * @param Channel : TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
+
+ /* Disable the Input Capture channels 1 and 2
+ (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */
+ if(Channel == TIM_CHANNEL_1)
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare DMA Request 1 */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ else if(Channel == TIM_CHANNEL_2)
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare DMA Request 2 */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ else
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare DMA Request 1 and 2 */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+/** @defgroup TIM_Exported_Functions_Group7 TIM IRQ handler management
+ * @brief IRQ handler management
+ *
+@verbatim
+ ==============================================================================
+ ##### IRQ handler management #####
+ ==============================================================================
+ [..]
+ This section provides Timer IRQ handler function.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief This function handles TIM interrupts requests.
+ * @param htim : TIM handle
+ * @retval None
+ */
+void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim)
+{
+ /* Capture compare 1 event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC1) != RESET)
+ {
+ if(__HAL_TIM_GET_ITSTATUS(htim, TIM_IT_CC1) !=RESET)
+ {
+ {
+ __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC1);
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
+
+ /* Input capture event */
+ if((htim->Instance->CCMR1 & TIM_CCMR1_CC1S) != 0x00)
+ {
+ HAL_TIM_IC_CaptureCallback(htim);
+ }
+ /* Output compare event */
+ else
+ {
+ HAL_TIM_OC_DelayElapsedCallback(htim);
+ HAL_TIM_PWM_PulseFinishedCallback(htim);
+ }
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+ }
+ }
+ }
+ /* Capture compare 2 event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC2) != RESET)
+ {
+ if(__HAL_TIM_GET_ITSTATUS(htim, TIM_IT_CC2) !=RESET)
+ {
+ __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC2);
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
+ /* Input capture event */
+ if((htim->Instance->CCMR1 & TIM_CCMR1_CC2S) != 0x00)
+ {
+ HAL_TIM_IC_CaptureCallback(htim);
+ }
+ /* Output compare event */
+ else
+ {
+ HAL_TIM_OC_DelayElapsedCallback(htim);
+ HAL_TIM_PWM_PulseFinishedCallback(htim);
+ }
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+ }
+ }
+ /* Capture compare 3 event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC3) != RESET)
+ {
+ if(__HAL_TIM_GET_ITSTATUS(htim, TIM_IT_CC3) !=RESET)
+ {
+ __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC3);
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
+ /* Input capture event */
+ if((htim->Instance->CCMR2 & TIM_CCMR2_CC3S) != 0x00)
+ {
+ HAL_TIM_IC_CaptureCallback(htim);
+ }
+ /* Output compare event */
+ else
+ {
+ HAL_TIM_OC_DelayElapsedCallback(htim);
+ HAL_TIM_PWM_PulseFinishedCallback(htim);
+ }
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+ }
+ }
+ /* Capture compare 4 event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC4) != RESET)
+ {
+ if(__HAL_TIM_GET_ITSTATUS(htim, TIM_IT_CC4) !=RESET)
+ {
+ __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC4);
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
+ /* Input capture event */
+ if((htim->Instance->CCMR2 & TIM_CCMR2_CC4S) != 0x00)
+ {
+ HAL_TIM_IC_CaptureCallback(htim);
+ }
+ /* Output compare event */
+ else
+ {
+ HAL_TIM_OC_DelayElapsedCallback(htim);
+ HAL_TIM_PWM_PulseFinishedCallback(htim);
+ }
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+ }
+ }
+ /* TIM Update event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_UPDATE) != RESET)
+ {
+ if(__HAL_TIM_GET_ITSTATUS(htim, TIM_IT_UPDATE) !=RESET)
+ {
+ __HAL_TIM_CLEAR_IT(htim, TIM_IT_UPDATE);
+ HAL_TIM_PeriodElapsedCallback(htim);
+ }
+ }
+ /* TIM Break input event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_BREAK) != RESET)
+ {
+ if(__HAL_TIM_GET_ITSTATUS(htim, TIM_IT_BREAK) !=RESET)
+ {
+ __HAL_TIM_CLEAR_IT(htim, TIM_IT_BREAK);
+ HAL_TIMEx_BreakCallback(htim);
+ }
+ }
+ /* TIM Trigger detection event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_TRIGGER) != RESET)
+ {
+ if(__HAL_TIM_GET_ITSTATUS(htim, TIM_IT_TRIGGER) !=RESET)
+ {
+ __HAL_TIM_CLEAR_IT(htim, TIM_IT_TRIGGER);
+ HAL_TIM_TriggerCallback(htim);
+ }
+ }
+ /* TIM commutation event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_COM) != RESET)
+ {
+ if(__HAL_TIM_GET_ITSTATUS(htim, TIM_IT_COM) !=RESET)
+ {
+ __HAL_TIM_CLEAR_IT(htim, TIM_FLAG_COM);
+ HAL_TIMEx_CommutationCallback(htim);
+ }
+ }
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group8 Peripheral Control functions
+ * @brief Peripheral Control functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral Control functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Configure The Input Output channels for OC, PWM, IC or One Pulse mode.
+ (+) Configure External Clock source.
+ (+) Configure Complementary channels, break features and dead time.
+ (+) Configure Master and the Slave synchronization.
+ (+) Configure the DMA Burst Mode.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the TIM Output Compare Channels according to the specified
+ * parameters in the TIM_OC_InitTypeDef.
+ * @param htim : TIM Output Compare handle
+ * @param sConfig : TIM Output Compare configuration structure
+ * @param Channel : TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CHANNELS(Channel));
+ assert_param(IS_TIM_OC_MODE(sConfig->OCMode));
+ assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity));
+ assert_param(IS_TIM_OCN_POLARITY(sConfig->OCNPolarity));
+ assert_param(IS_TIM_OCNIDLE_STATE(sConfig->OCNIdleState));
+ assert_param(IS_TIM_OCIDLE_STATE(sConfig->OCIdleState));
+
+ /* Check input state */
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+ /* Configure the TIM Channel 1 in Output Compare */
+ TIM_OC1_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ /* Configure the TIM Channel 2 in Output Compare */
+ TIM_OC2_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+ /* Configure the TIM Channel 3 in Output Compare */
+ TIM_OC3_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+ /* Configure the TIM Channel 4 in Output Compare */
+ TIM_OC4_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ default:
+ break;
+ }
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM Input Capture Channels according to the specified
+ * parameters in the TIM_IC_InitTypeDef.
+ * @param htim : TIM IC handle
+ * @param sConfig : TIM Input Capture configuration structure
+ * @param Channel : TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef* sConfig, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_IC_POLARITY(sConfig->ICPolarity));
+ assert_param(IS_TIM_IC_SELECTION(sConfig->ICSelection));
+ assert_param(IS_TIM_IC_PRESCALER(sConfig->ICPrescaler));
+ assert_param(IS_TIM_IC_FILTER(sConfig->ICFilter));
+
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ if (Channel == TIM_CHANNEL_1)
+ {
+ /* TI1 Configuration */
+ TIM_TI1_SetConfig(htim->Instance,
+ sConfig->ICPolarity,
+ sConfig->ICSelection,
+ sConfig->ICFilter);
+
+ /* Reset the IC1PSC Bits */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC;
+
+ /* Set the IC1PSC value */
+ htim->Instance->CCMR1 |= sConfig->ICPrescaler;
+ }
+ else if (Channel == TIM_CHANNEL_2)
+ {
+ /* TI2 Configuration */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ TIM_TI2_SetConfig(htim->Instance,
+ sConfig->ICPolarity,
+ sConfig->ICSelection,
+ sConfig->ICFilter);
+
+ /* Reset the IC2PSC Bits */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC;
+
+ /* Set the IC2PSC value */
+ htim->Instance->CCMR1 |= (sConfig->ICPrescaler << 8);
+ }
+ else if (Channel == TIM_CHANNEL_3)
+ {
+ /* TI3 Configuration */
+ assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+
+ TIM_TI3_SetConfig(htim->Instance,
+ sConfig->ICPolarity,
+ sConfig->ICSelection,
+ sConfig->ICFilter);
+
+ /* Reset the IC3PSC Bits */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC;
+
+ /* Set the IC3PSC value */
+ htim->Instance->CCMR2 |= sConfig->ICPrescaler;
+ }
+ else
+ {
+ /* TI4 Configuration */
+ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+
+ TIM_TI4_SetConfig(htim->Instance,
+ sConfig->ICPolarity,
+ sConfig->ICSelection,
+ sConfig->ICFilter);
+
+ /* Reset the IC4PSC Bits */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC;
+
+ /* Set the IC4PSC value */
+ htim->Instance->CCMR2 |= (sConfig->ICPrescaler << 8);
+ }
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM PWM channels according to the specified
+ * parameters in the TIM_OC_InitTypeDef.
+ * @param htim : TIM handle
+ * @param sConfig : TIM PWM configuration structure
+ * @param Channel : TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel)
+{
+ __HAL_LOCK(htim);
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CHANNELS(Channel));
+ assert_param(IS_TIM_PWM_MODE(sConfig->OCMode));
+ assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity));
+ assert_param(IS_TIM_OCN_POLARITY(sConfig->OCNPolarity));
+ assert_param(IS_TIM_FAST_STATE(sConfig->OCFastMode));
+ assert_param(IS_TIM_OCNIDLE_STATE(sConfig->OCNIdleState));
+ assert_param(IS_TIM_OCIDLE_STATE(sConfig->OCIdleState));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+ /* Configure the Channel 1 in PWM mode */
+ TIM_OC1_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel1 */
+ htim->Instance->CCMR1 |= TIM_CCMR1_OC1PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE;
+ htim->Instance->CCMR1 |= sConfig->OCFastMode;
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ /* Configure the Channel 2 in PWM mode */
+ TIM_OC2_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel2 */
+ htim->Instance->CCMR1 |= TIM_CCMR1_OC2PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE;
+ htim->Instance->CCMR1 |= sConfig->OCFastMode << 8;
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+ /* Configure the Channel 3 in PWM mode */
+ TIM_OC3_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel3 */
+ htim->Instance->CCMR2 |= TIM_CCMR2_OC3PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE;
+ htim->Instance->CCMR2 |= sConfig->OCFastMode;
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+ /* Configure the Channel 4 in PWM mode */
+ TIM_OC4_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel4 */
+ htim->Instance->CCMR2 |= TIM_CCMR2_OC4PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE;
+ htim->Instance->CCMR2 |= sConfig->OCFastMode << 8;
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM One Pulse Channels according to the specified
+ * parameters in the TIM_OnePulse_InitTypeDef.
+ * @param htim : TIM One Pulse handle
+ * @param sConfig : TIM One Pulse configuration structure
+ * @param OutputChannel : TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @param InputChannel : TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef* sConfig, uint32_t OutputChannel, uint32_t InputChannel)
+{
+ TIM_OC_InitTypeDef temp1;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_OPM_CHANNELS(OutputChannel));
+ assert_param(IS_TIM_OPM_CHANNELS(InputChannel));
+
+ if(OutputChannel != InputChannel)
+ {
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Extract the Ouput compare configuration from sConfig structure */
+ temp1.OCMode = sConfig->OCMode;
+ temp1.Pulse = sConfig->Pulse;
+ temp1.OCPolarity = sConfig->OCPolarity;
+ temp1.OCNPolarity = sConfig->OCNPolarity;
+ temp1.OCIdleState = sConfig->OCIdleState;
+ temp1.OCNIdleState = sConfig->OCNIdleState;
+
+ switch (OutputChannel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+
+ TIM_OC1_SetConfig(htim->Instance, &temp1);
+ }
+ break;
+ case TIM_CHANNEL_2:
+ {
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ TIM_OC2_SetConfig(htim->Instance, &temp1);
+ }
+ break;
+ default:
+ break;
+ }
+ switch (InputChannel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+
+ TIM_TI1_SetConfig(htim->Instance, sConfig->ICPolarity,
+ sConfig->ICSelection, sConfig->ICFilter);
+
+ /* Reset the IC1PSC Bits */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC;
+
+ /* Select the Trigger source */
+ htim->Instance->SMCR &= ~TIM_SMCR_TS;
+ htim->Instance->SMCR |= TIM_TS_TI1FP1;
+
+ /* Select the Slave Mode */
+ htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+ htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER;
+ }
+ break;
+ case TIM_CHANNEL_2:
+ {
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ TIM_TI2_SetConfig(htim->Instance, sConfig->ICPolarity,
+ sConfig->ICSelection, sConfig->ICFilter);
+
+ /* Reset the IC2PSC Bits */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC;
+
+ /* Select the Trigger source */
+ htim->Instance->SMCR &= ~TIM_SMCR_TS;
+ htim->Instance->SMCR |= TIM_TS_TI2FP2;
+
+ /* Select the Slave Mode */
+ htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+ htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER;
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Configure the DMA Burst to transfer Data from the memory to the TIM peripheral
+ * @param htim : TIM handle
+ * @param BurstBaseAddress : TIM Base address from where the DMA will start the Data write
+ * This parameter can be one of the following values:
+ * @arg TIM_DMABase_CR1
+ * @arg TIM_DMABase_CR2
+ * @arg TIM_DMABase_SMCR
+ * @arg TIM_DMABase_DIER
+ * @arg TIM_DMABase_SR
+ * @arg TIM_DMABase_EGR
+ * @arg TIM_DMABase_CCMR1
+ * @arg TIM_DMABase_CCMR2
+ * @arg TIM_DMABase_CCER
+ * @arg TIM_DMABase_CNT
+ * @arg TIM_DMABase_PSC
+ * @arg TIM_DMABase_ARR
+ * @arg TIM_DMABase_RCR
+ * @arg TIM_DMABase_CCR1
+ * @arg TIM_DMABase_CCR2
+ * @arg TIM_DMABase_CCR3
+ * @arg TIM_DMABase_CCR4
+ * @arg TIM_DMABase_BDTR
+ * @arg TIM_DMABase_DCR
+ * @param BurstRequestSrc : TIM DMA Request sources
+ * This parameter can be one of the following values:
+ * @arg TIM_DMA_UPDATE: TIM update Interrupt source
+ * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source
+ * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source
+ * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source
+ * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source
+ * @arg TIM_DMA_COM: TIM Commutation DMA source
+ * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source
+ * @param BurstBuffer : The Buffer address.
+ * @param BurstLength : DMA Burst length. This parameter can be one value
+ * between: TIM_DMABurstLength_1Transfer and TIM_DMABurstLength_18Transfers.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc,
+ uint32_t* BurstBuffer, uint32_t BurstLength)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_DMA_BASE(BurstBaseAddress));
+ assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
+ assert_param(IS_TIM_DMA_LENGTH(BurstLength));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if((BurstBuffer == 0 ) && (BurstLength > 0))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ switch(BurstRequestSrc)
+ {
+ case TIM_DMA_UPDATE:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
+ }
+ break;
+ case TIM_DMA_CC1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
+ }
+ break;
+ case TIM_DMA_CC2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
+ }
+ break;
+ case TIM_DMA_CC3:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
+ }
+ break;
+ case TIM_DMA_CC4:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
+ }
+ break;
+ case TIM_DMA_COM:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = HAL_TIMEx_DMACommutationCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
+ }
+ break;
+ case TIM_DMA_TRIGGER:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
+ }
+ break;
+ default:
+ break;
+ }
+ /* configure the DMA Burst Mode */
+ htim->Instance->DCR = BurstBaseAddress | BurstLength;
+
+ /* Enable the TIM DMA Request */
+ __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc);
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM DMA Burst mode
+ * @param htim : TIM handle
+ * @param BurstRequestSrc : TIM DMA Request sources to disable
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
+
+ /* Abort the DMA transfer (at least disable the DMA channel) */
+ switch(BurstRequestSrc)
+ {
+ case TIM_DMA_UPDATE:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_UPDATE]);
+ }
+ break;
+ case TIM_DMA_CC1:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC1]);
+ }
+ break;
+ case TIM_DMA_CC2:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC2]);
+ }
+ break;
+ case TIM_DMA_CC3:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC3]);
+ }
+ break;
+ case TIM_DMA_CC4:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC4]);
+ }
+ break;
+ case TIM_DMA_COM:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_COMMUTATION]);
+ }
+ break;
+ case TIM_DMA_TRIGGER:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_TRIGGER]);
+ }
+ break;
+ default:
+ break;
+ }
+
+ /* Disable the TIM Update DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory
+ * @param htim : TIM handle
+ * @param BurstBaseAddress : TIM Base address from where the DMA will starts the Data read
+ * This parameter can be one of the following values:
+ * @arg TIM_DMABase_CR1
+ * @arg TIM_DMABase_CR2
+ * @arg TIM_DMABase_SMCR
+ * @arg TIM_DMABase_DIER
+ * @arg TIM_DMABase_SR
+ * @arg TIM_DMABase_EGR
+ * @arg TIM_DMABase_CCMR1
+ * @arg TIM_DMABase_CCMR2
+ * @arg TIM_DMABase_CCER
+ * @arg TIM_DMABase_CNT
+ * @arg TIM_DMABase_PSC
+ * @arg TIM_DMABase_ARR
+ * @arg TIM_DMABase_RCR
+ * @arg TIM_DMABase_CCR1
+ * @arg TIM_DMABase_CCR2
+ * @arg TIM_DMABase_CCR3
+ * @arg TIM_DMABase_CCR4
+ * @arg TIM_DMABase_BDTR
+ * @arg TIM_DMABase_DCR
+ * @param BurstRequestSrc : TIM DMA Request sources
+ * This parameter can be one of the following values:
+ * @arg TIM_DMA_UPDATE: TIM update Interrupt source
+ * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source
+ * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source
+ * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source
+ * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source
+ * @arg TIM_DMA_COM: TIM Commutation DMA source
+ * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source
+ * @param BurstBuffer : The Buffer address.
+ * @param BurstLength : DMA Burst length. This parameter can be one value
+ * between: TIM_DMABurstLength_1Transfer and TIM_DMABurstLength_18Transfers.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc,
+ uint32_t *BurstBuffer, uint32_t BurstLength)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_DMA_BASE(BurstBaseAddress));
+ assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
+ assert_param(IS_TIM_DMA_LENGTH(BurstLength));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if((BurstBuffer == 0 ) && (BurstLength > 0))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ switch(BurstRequestSrc)
+ {
+ case TIM_DMA_UPDATE:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
+ }
+ break;
+ case TIM_DMA_CC1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
+ }
+ break;
+ case TIM_DMA_CC2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
+ }
+ break;
+ case TIM_DMA_CC3:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
+ }
+ break;
+ case TIM_DMA_CC4:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
+ }
+ break;
+ case TIM_DMA_COM:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = HAL_TIMEx_DMACommutationCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
+ }
+ break;
+ case TIM_DMA_TRIGGER:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
+ }
+ break;
+ default:
+ break;
+ }
+
+ /* configure the DMA Burst Mode */
+ htim->Instance->DCR = BurstBaseAddress | BurstLength;
+
+ /* Enable the TIM DMA Request */
+ __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc);
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stop the DMA burst reading
+ * @param htim : TIM handle
+ * @param BurstRequestSrc : TIM DMA Request sources to disable.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
+
+ /* Abort the DMA transfer (at least disable the DMA channel) */
+ switch(BurstRequestSrc)
+ {
+ case TIM_DMA_UPDATE:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_UPDATE]);
+ }
+ break;
+ case TIM_DMA_CC1:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC1]);
+ }
+ break;
+ case TIM_DMA_CC2:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC2]);
+ }
+ break;
+ case TIM_DMA_CC3:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC3]);
+ }
+ break;
+ case TIM_DMA_CC4:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC4]);
+ }
+ break;
+ case TIM_DMA_COM:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_COMMUTATION]);
+ }
+ break;
+ case TIM_DMA_TRIGGER:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_TRIGGER]);
+ }
+ break;
+ default:
+ break;
+ }
+
+ /* Disable the TIM Update DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Generate a software event
+ * @param htim : TIM handle
+ * @param EventSource : specifies the event source.
+ * This parameter can be one of the following values:
+ * @arg TIM_EventSource_Update: Timer update Event source
+ * @arg TIM_EventSource_CC1: Timer Capture Compare 1 Event source
+ * @arg TIM_EventSource_CC2: Timer Capture Compare 2 Event source
+ * @arg TIM_EventSource_CC3: Timer Capture Compare 3 Event source
+ * @arg TIM_EventSource_CC4: Timer Capture Compare 4 Event source
+ * @arg TIM_EventSource_COM: Timer COM event source
+ * @arg TIM_EventSource_Trigger: Timer Trigger Event source
+ * @arg TIM_EventSource_Break: Timer Break event source
+ * @note TIM6 and TIM7 can only generate an update event.
+ * @note TIM_EventSource_COM and TIM_EventSource_Break are used only with TIM1, TIM15, TIM16 and TIM17.
+ * @retval HAL status
+ */
+
+HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_EVENT_SOURCE(EventSource));
+
+ /* Process Locked */
+ __HAL_LOCK(htim);
+
+ /* Change the TIM state */
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Set the event sources */
+ htim->Instance->EGR = EventSource;
+
+ /* Change the TIM state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the OCRef clear feature
+ * @param htim : TIM handle
+ * @param sClearInputConfig : pointer to a TIM_ClearInputConfigTypeDef structure that
+ * contains the OCREF clear feature and parameters for the TIM peripheral.
+ * @param Channel : specifies the TIM Channel
+ * This parameter can be one of the following values:
+ * @arg TIM_Channel_1: TIM Channel 1
+ * @arg TIM_Channel_2: TIM Channel 2
+ * @arg TIM_Channel_3: TIM Channel 3
+ * @arg TIM_Channel_4: TIM Channel 4
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef * sClearInputConfig, uint32_t Channel)
+{
+ uint32_t tmpsmcr = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_OCXREF_CLEAR_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_CLEARINPUT_SOURCE(sClearInputConfig->ClearInputSource));
+ assert_param(IS_TIM_CLEARINPUT_POLARITY(sClearInputConfig->ClearInputPolarity));
+ assert_param(IS_TIM_CLEARINPUT_PRESCALER(sClearInputConfig->ClearInputPrescaler));
+ assert_param(IS_TIM_CLEARINPUT_FILTER(sClearInputConfig->ClearInputFilter));
+
+ /* Process Locked */
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ switch (sClearInputConfig->ClearInputSource)
+ {
+ case TIM_CLEARINPUTSOURCE_NONE:
+ {
+ /* Clear the OCREF clear selection bit */
+ tmpsmcr &= ~TIM_SMCR_OCCS;
+
+ /* Clear the ETR Bits */
+ tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP);
+
+ /* Set TIMx_SMCR */
+ htim->Instance->SMCR = tmpsmcr;
+ }
+ break;
+
+ case TIM_CLEARINPUTSOURCE_ETR:
+ {
+ TIM_ETR_SetConfig(htim->Instance,
+ sClearInputConfig->ClearInputPrescaler,
+ sClearInputConfig->ClearInputPolarity,
+ sClearInputConfig->ClearInputFilter);
+
+ /* Set the OCREF clear selection bit */
+ htim->Instance->SMCR |= TIM_SMCR_OCCS;
+ }
+ break;
+ default:
+ break;
+ }
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 1 */
+ htim->Instance->CCMR1 |= TIM_CCMR1_OC1CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 1 */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1CE;
+ }
+ }
+ break;
+ case TIM_CHANNEL_2:
+ {
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 2 */
+ htim->Instance->CCMR1 |= TIM_CCMR1_OC2CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 2 */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2CE;
+ }
+ }
+ break;
+ case TIM_CHANNEL_3:
+ {
+ assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 3 */
+ htim->Instance->CCMR2 |= TIM_CCMR2_OC3CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 3 */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3CE;
+ }
+ }
+ break;
+ case TIM_CHANNEL_4:
+ {
+ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 4 */
+ htim->Instance->CCMR2 |= TIM_CCMR2_OC4CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 4 */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4CE;
+ }
+ }
+ break;
+ default:
+ break;
+ }
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the clock source to be used
+ * @param htim : TIM handle
+ * @param sClockSourceConfig : pointer to a TIM_ClockConfigTypeDef structure that
+ * contains the clock source information for the TIM peripheral.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef * sClockSourceConfig)
+{
+ uint32_t tmpsmcr = 0;
+
+ /* Process Locked */
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CLOCKSOURCE(sClockSourceConfig->ClockSource));
+ assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+ assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler));
+ assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+
+ /* Reset the SMS, TS, ECE, ETPS and ETRF bits */
+ tmpsmcr = htim->Instance->SMCR;
+ tmpsmcr &= ~(TIM_SMCR_SMS | TIM_SMCR_TS);
+ tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP);
+ htim->Instance->SMCR = tmpsmcr;
+
+ switch (sClockSourceConfig->ClockSource)
+ {
+ case TIM_CLOCKSOURCE_INTERNAL:
+ {
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ /* Disable slave mode to clock the prescaler directly with the internal clock */
+ htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+ }
+ break;
+
+ case TIM_CLOCKSOURCE_ETRMODE1:
+ {
+ /* Check whether or not the timer instance supports external trigger input mode 1 (ETRF)*/
+ assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance));
+
+ /* Configure the ETR Clock source */
+ TIM_ETR_SetConfig(htim->Instance,
+ sClockSourceConfig->ClockPrescaler,
+ sClockSourceConfig->ClockPolarity,
+ sClockSourceConfig->ClockFilter);
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = htim->Instance->SMCR;
+ /* Reset the SMS and TS Bits */
+ tmpsmcr &= ~(TIM_SMCR_SMS | TIM_SMCR_TS);
+ /* Select the External clock mode1 and the ETRF trigger */
+ tmpsmcr |= (TIM_SLAVEMODE_EXTERNAL1 | TIM_CLOCKSOURCE_ETRMODE1);
+ /* Write to TIMx SMCR */
+ htim->Instance->SMCR = tmpsmcr;
+ }
+ break;
+
+ case TIM_CLOCKSOURCE_ETRMODE2:
+ {
+ /* Check whether or not the timer instance supports external trigger input mode 2 (ETRF)*/
+ assert_param(IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(htim->Instance));
+
+ /* Configure the ETR Clock source */
+ TIM_ETR_SetConfig(htim->Instance,
+ sClockSourceConfig->ClockPrescaler,
+ sClockSourceConfig->ClockPolarity,
+ sClockSourceConfig->ClockFilter);
+ /* Enable the External clock mode2 */
+ htim->Instance->SMCR |= TIM_SMCR_ECE;
+ }
+ break;
+
+ case TIM_CLOCKSOURCE_TI1:
+ {
+ /* Check whether or not the timer instance supports external clock mode 1 */
+ assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance));
+
+ TIM_TI1_ConfigInputStage(htim->Instance,
+ sClockSourceConfig->ClockPolarity,
+ sClockSourceConfig->ClockFilter);
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1);
+ }
+ break;
+ case TIM_CLOCKSOURCE_TI2:
+ {
+ /* Check whether or not the timer instance supports external clock mode 1 (ETRF)*/
+ assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance));
+
+ TIM_TI2_ConfigInputStage(htim->Instance,
+ sClockSourceConfig->ClockPolarity,
+ sClockSourceConfig->ClockFilter);
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI2);
+ }
+ break;
+ case TIM_CLOCKSOURCE_TI1ED:
+ {
+ /* Check whether or not the timer instance supports external clock mode 1 */
+ assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance));
+
+ TIM_TI1_ConfigInputStage(htim->Instance,
+ sClockSourceConfig->ClockPolarity,
+ sClockSourceConfig->ClockFilter);
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1ED);
+ }
+ break;
+ case TIM_CLOCKSOURCE_ITR0:
+ {
+ /* Check whether or not the timer instance supports external clock mode 1 */
+ assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance));
+
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR0);
+ }
+ break;
+ case TIM_CLOCKSOURCE_ITR1:
+ {
+ /* Check whether or not the timer instance supports external clock mode 1 */
+ assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance));
+
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR1);
+ }
+ break;
+ case TIM_CLOCKSOURCE_ITR2:
+ {
+ /* Check whether or not the timer instance supports external clock mode 1 */
+ assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance));
+
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR2);
+ }
+ break;
+ case TIM_CLOCKSOURCE_ITR3:
+ {
+ /* Check whether or not the timer instance supports external clock mode 1 */
+ assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance));
+
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR3);
+ }
+ break;
+
+ default:
+ break;
+ }
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Selects the signal connected to the TI1 input: direct from CH1_input
+ * or a XOR combination between CH1_input, CH2_input & CH3_input
+ * @param htim : TIM handle.
+ * @param TI1_Selection : Indicate whether or not channel 1 is connected to the
+ * output of a XOR gate.
+ * This parameter can be one of the following values:
+ * @arg TIM_TI1SELECTION_CH1: The TIMx_CH1 pin is connected to TI1 input
+ * @arg TIM_TI1SELECTION_XORCOMBINATION: The TIMx_CH1, CH2 and CH3
+ * pins are connected to the TI1 input (XOR combination)
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection)
+{
+ uint32_t tmpcr2 = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TI1SELECTION(TI1_Selection));
+
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = htim->Instance->CR2;
+
+ /* Reset the TI1 selection */
+ tmpcr2 &= ~TIM_CR2_TI1S;
+
+ /* Set the the TI1 selection */
+ tmpcr2 |= TI1_Selection;
+
+ /* Write to TIMxCR2 */
+ htim->Instance->CR2 = tmpcr2;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the TIM in Slave mode
+ * @param htim : TIM handle.
+ * @param sSlaveConfig : pointer to a TIM_SlaveConfigTypeDef structure that
+ * contains the selected trigger (internal trigger input, filtered
+ * timer input or external trigger input) and the ) and the Slave
+ * mode (Disable, Reset, Gated, Trigger, External clock mode 1).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode));
+ assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger));
+
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ TIM_SlaveTimer_SetConfig(htim, sSlaveConfig);
+
+ /* Disable Trigger Interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_TRIGGER);
+
+ /* Disable Trigger DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER);
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+ }
+
+/**
+ * @brief Configures the TIM in Slave mode in interrupt mode
+ * @param htim: TIM handle.
+ * @param sSlaveConfig: pointer to a TIM_SlaveConfigTypeDef structure that
+ * contains the selected trigger (internal trigger input, filtered
+ * timer input or external trigger input) and the ) and the Slave
+ * mode (Disable, Reset, Gated, Trigger, External clock mode 1).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization_IT(TIM_HandleTypeDef *htim,
+ TIM_SlaveConfigTypeDef * sSlaveConfig)
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode));
+ assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger));
+
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ TIM_SlaveTimer_SetConfig(htim, sSlaveConfig);
+
+ /* Enable Trigger Interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_TRIGGER);
+
+ /* Disable Trigger DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER);
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Read the captured value from Capture Compare unit
+ * @param htim : TIM handle.
+ * @param Channel : TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1 : TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2 : TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3 : TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4 : TIM Channel 4 selected
+ * @retval Captured value
+ */
+uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ uint32_t tmpreg = 0;
+
+ __HAL_LOCK(htim);
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+
+ /* Return the capture 1 value */
+ tmpreg = htim->Instance->CCR1;
+
+ break;
+ }
+ case TIM_CHANNEL_2:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ /* Return the capture 2 value */
+ tmpreg = htim->Instance->CCR2;
+
+ break;
+ }
+
+ case TIM_CHANNEL_3:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+
+ /* Return the capture 3 value */
+ tmpreg = htim->Instance->CCR3;
+
+ break;
+ }
+
+ case TIM_CHANNEL_4:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+
+ /* Return the capture 4 value */
+ tmpreg = htim->Instance->CCR4;
+
+ break;
+ }
+
+ default:
+ break;
+ }
+
+ __HAL_UNLOCK(htim);
+ return tmpreg;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions
+ * @brief TIM Callbacks functions
+ *
+@verbatim
+ ==============================================================================
+ ##### TIM Callbacks functions #####
+ ==============================================================================
+ [..]
+ This section provides TIM callback functions:
+ (+) Timer Period elapsed callback
+ (+) Timer Output Compare callback
+ (+) Timer Input capture callback
+ (+) Timer Trigger callback
+ (+) Timer Error callback
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Period elapsed callback in non blocking mode
+ * @param htim : TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the __HAL_TIM_PeriodElapsedCallback could be implemented in the user file
+ */
+
+}
+/**
+ * @brief Output Compare callback in non blocking mode
+ * @param htim : TIM OC handle
+ * @retval None
+ */
+__weak void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the __HAL_TIM_OC_DelayElapsedCallback could be implemented in the user file
+ */
+}
+/**
+ * @brief Input Capture callback in non blocking mode
+ * @param htim : TIM IC handle
+ * @retval None
+ */
+__weak void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the __HAL_TIM_IC_CaptureCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief PWM Pulse finished callback in non blocking mode
+ * @param htim : TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the __HAL_TIM_PWM_PulseFinishedCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Hall Trigger detection callback in non blocking mode
+ * @param htim : TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_TriggerCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Timer error callback in non blocking mode
+ * @param htim : TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_ErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group10 Peripheral State functions
+ * @brief Peripheral State functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral State functions #####
+ ==============================================================================
+ [..]
+ This subsection permit to get in run-time the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the TIM Base state
+ * @param htim : TIM Base handle
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @brief Return the TIM OC state
+ * @param htim : TIM Ouput Compare handle
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @brief Return the TIM PWM state
+ * @param htim : TIM handle
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @brief Return the TIM Input Capture state
+ * @param htim : TIM IC handle
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @brief Return the TIM One Pulse Mode state
+ * @param htim : TIM OPM handle
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @brief Return the TIM Encoder Mode state
+ * @param htim : TIM Encoder handle
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Private_Functions TIM_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief TIM DMA error callback
+ * @param hdma : pointer to DMA handle.
+ * @retval None
+ */
+void HAL_TIM_DMAError(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ htim->State= HAL_TIM_STATE_READY;
+
+ HAL_TIM_ErrorCallback(htim);
+}
+
+/**
+ * @brief TIM DMA Delay Pulse complete callback.
+ * @param hdma : pointer to DMA handle.
+ * @retval None
+ */
+void HAL_TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ htim->State= HAL_TIM_STATE_READY;
+
+ if (hdma == htim->hdma[TIM_DMA_ID_CC1])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
+ }
+ else if (hdma == htim->hdma[TIM_DMA_ID_CC2])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
+ }
+ else if (hdma == htim->hdma[TIM_DMA_ID_CC3])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
+ }
+ else if (hdma == htim->hdma[TIM_DMA_ID_CC4])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
+ }
+
+ HAL_TIM_PWM_PulseFinishedCallback(htim);
+
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+}
+/**
+ * @brief TIM DMA Capture complete callback.
+ * @param hdma : pointer to DMA handle.
+ * @retval None
+ */
+void HAL_TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ htim->State= HAL_TIM_STATE_READY;
+
+ if (hdma == htim->hdma[TIM_DMA_ID_CC1])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
+ }
+ else if (hdma == htim->hdma[TIM_DMA_ID_CC2])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
+ }
+ else if (hdma == htim->hdma[TIM_DMA_ID_CC3])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
+ }
+ else if (hdma == htim->hdma[TIM_DMA_ID_CC4])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
+ }
+
+ HAL_TIM_IC_CaptureCallback(htim);
+
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+}
+
+/**
+ * @brief TIM DMA Period Elapse complete callback.
+ * @param hdma : pointer to DMA handle.
+ * @retval None
+ */
+static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ htim->State= HAL_TIM_STATE_READY;
+
+ HAL_TIM_PeriodElapsedCallback(htim);
+}
+
+/**
+ * @brief TIM DMA Trigger callback.
+ * @param hdma : pointer to DMA handle.
+ * @retval None
+ */
+static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ htim->State= HAL_TIM_STATE_READY;
+
+ HAL_TIM_TriggerCallback(htim);
+}
+
+/**
+ * @brief Time Base configuration
+ * @param TIMx : TIM periheral
+ * @param Structure : TIM Base configuration structure
+ * @retval None
+ */
+void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure)
+{
+ uint32_t tmpcr1 = 0;
+ tmpcr1 = TIMx->CR1;
+
+ /* Set TIM Time Base Unit parameters ---------------------------------------*/
+ if (IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx))
+ {
+ /* Select the Counter Mode */
+ tmpcr1 &= ~(TIM_CR1_DIR | TIM_CR1_CMS);
+ tmpcr1 |= Structure->CounterMode;
+ }
+
+ if(IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx))
+ {
+ /* Set the clock division */
+ tmpcr1 &= ~TIM_CR1_CKD;
+ tmpcr1 |= (uint32_t)Structure->ClockDivision;
+ }
+
+ TIMx->CR1 = tmpcr1;
+
+ /* Set the Autoreload value */
+ TIMx->ARR = (uint32_t)Structure->Period ;
+
+ /* Set the Prescaler value */
+ TIMx->PSC = (uint32_t)Structure->Prescaler;
+
+ if (IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx))
+ {
+ /* Set the Repetition Counter value */
+ TIMx->RCR = Structure->RepetitionCounter;
+ }
+
+ /* Generate an update event to reload the Prescaler
+ and the repetition counter(only for TIM1 and TIM8) value immediatly */
+ TIMx->EGR = TIM_EGR_UG;
+}
+
+/**
+ * @brief Time Ouput Compare 1 configuration
+ * @param TIMx to select the TIM peripheral
+ * @param OC_Config : The ouput configuration structure
+ * @retval None
+ */
+static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+ uint32_t tmpccmrx = 0;
+ uint32_t tmpccer = 0;
+ uint32_t tmpcr2 = 0;
+
+ /* Disable the Channel 1: Reset the CC1E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC1E;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+
+ /* Get the TIMx CCMR1 register value */
+ tmpccmrx = TIMx->CCMR1;
+
+ /* Reset the Output Compare Mode Bits */
+ tmpccmrx &= ~TIM_CCMR1_OC1M;
+ tmpccmrx &= ~TIM_CCMR1_CC1S;
+ /* Select the Output Compare Mode */
+ tmpccmrx |= OC_Config->OCMode;
+
+ /* Reset the Output Polarity level */
+ tmpccer &= ~TIM_CCER_CC1P;
+ /* Set the Output Compare Polarity */
+ tmpccer |= OC_Config->OCPolarity;
+
+ if(IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_1))
+ {
+ /* Check parameters */
+ assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity));
+
+ /* Reset the Output N Polarity level */
+ tmpccer &= ~TIM_CCER_CC1NP;
+ /* Set the Output N Polarity */
+ tmpccer |= OC_Config->OCNPolarity;
+ /* Reset the Output N State */
+ tmpccer &= ~TIM_CCER_CC1NE;
+ }
+
+ if(IS_TIM_BREAK_INSTANCE(TIMx))
+ {
+ /* Check parameters */
+ assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState));
+ assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState));
+
+ /* Reset the Output Compare and Output Compare N IDLE State */
+ tmpcr2 &= ~TIM_CR2_OIS1;
+ tmpcr2 &= ~TIM_CR2_OIS1N;
+ /* Set the Output Idle state */
+ tmpcr2 |= OC_Config->OCIdleState;
+ /* Set the Output N Idle state */
+ tmpcr2 |= OC_Config->OCNIdleState;
+ }
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR1 */
+ TIMx->CCMR1 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR1 = OC_Config->Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Time Ouput Compare 2 configuration
+ * @param TIMx to select the TIM peripheral
+ * @param OC_Config : The ouput configuration structure
+ * @retval None
+ */
+void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+ uint32_t tmpccmrx = 0;
+ uint32_t tmpccer = 0;
+ uint32_t tmpcr2 = 0;
+
+ /* Disable the Channel 2: Reset the CC2E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC2E;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+
+ /* Get the TIMx CCMR1 register value */
+ tmpccmrx = TIMx->CCMR1;
+
+ /* Reset the Output Compare mode and Capture/Compare selection Bits */
+ tmpccmrx &= ~TIM_CCMR1_OC2M;
+ tmpccmrx &= ~TIM_CCMR1_CC2S;
+
+ /* Select the Output Compare Mode */
+ tmpccmrx |= (OC_Config->OCMode << 8);
+
+ /* Reset the Output Polarity level */
+ tmpccer &= ~TIM_CCER_CC2P;
+ /* Set the Output Compare Polarity */
+ tmpccer |= (OC_Config->OCPolarity << 4);
+
+ if(IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_2))
+ {
+ assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity));
+ assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState));
+ assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState));
+
+ /* Reset the Output N Polarity level */
+ tmpccer &= ~TIM_CCER_CC2NP;
+ /* Set the Output N Polarity */
+ tmpccer |= (OC_Config->OCNPolarity << 4);
+ /* Reset the Output N State */
+ tmpccer &= ~TIM_CCER_CC2NE;
+
+ }
+
+ if(IS_TIM_BREAK_INSTANCE(TIMx))
+ {
+ /* Check parameters */
+ assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState));
+ assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState));
+
+ /* Reset the Output Compare and Output Compare N IDLE State */
+ tmpcr2 &= ~TIM_CR2_OIS2;
+ tmpcr2 &= ~TIM_CR2_OIS2N;
+ /* Set the Output Idle state */
+ tmpcr2 |= (OC_Config->OCIdleState << 2);
+ /* Set the Output N Idle state */
+ tmpcr2 |= (OC_Config->OCNIdleState << 2);
+ }
+
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR1 */
+ TIMx->CCMR1 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR2 = OC_Config->Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Time Ouput Compare 3 configuration
+ * @param TIMx to select the TIM peripheral
+ * @param OC_Config : The ouput configuration structure
+ * @retval None
+ */
+static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+ uint32_t tmpccmrx = 0;
+ uint32_t tmpccer = 0;
+ uint32_t tmpcr2 = 0;
+
+ /* Disable the Channel 3: Reset the CC2E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC3E;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+
+ /* Get the TIMx CCMR2 register value */
+ tmpccmrx = TIMx->CCMR2;
+
+ /* Reset the Output Compare mode and Capture/Compare selection Bits */
+ tmpccmrx &= ~TIM_CCMR2_OC3M;
+ tmpccmrx &= ~TIM_CCMR2_CC3S;
+ /* Select the Output Compare Mode */
+ tmpccmrx |= OC_Config->OCMode;
+
+ /* Reset the Output Polarity level */
+ tmpccer &= ~TIM_CCER_CC3P;
+ /* Set the Output Compare Polarity */
+ tmpccer |= (OC_Config->OCPolarity << 8);
+
+ if(IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_3))
+ {
+ assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity));
+ assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState));
+ assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState));
+
+ /* Reset the Output N Polarity level */
+ tmpccer &= ~TIM_CCER_CC3NP;
+ /* Set the Output N Polarity */
+ tmpccer |= (OC_Config->OCNPolarity << 8);
+ /* Reset the Output N State */
+ tmpccer &= ~TIM_CCER_CC3NE;
+ }
+
+ if(IS_TIM_BREAK_INSTANCE(TIMx))
+ {
+ /* Check parameters */
+ assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState));
+ assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState));
+
+ /* Reset the Output Compare and Output Compare N IDLE State */
+ tmpcr2 &= ~TIM_CR2_OIS3;
+ tmpcr2 &= ~TIM_CR2_OIS3N;
+ /* Set the Output Idle state */
+ tmpcr2 |= (OC_Config->OCIdleState << 4);
+ /* Set the Output N Idle state */
+ tmpcr2 |= (OC_Config->OCNIdleState << 4);
+ }
+
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR2 */
+ TIMx->CCMR2 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR3 = OC_Config->Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Time Ouput Compare 4 configuration
+ * @param TIMx to select the TIM peripheral
+ * @param OC_Config : The ouput configuration structure
+ * @retval None
+ */
+static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+ uint32_t tmpccmrx = 0;
+ uint32_t tmpccer = 0;
+ uint32_t tmpcr2 = 0;
+
+ /* Disable the Channel 4: Reset the CC4E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC4E;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+
+ /* Get the TIMx CCMR2 register value */
+ tmpccmrx = TIMx->CCMR2;
+
+ /* Reset the Output Compare mode and Capture/Compare selection Bits */
+ tmpccmrx &= ~TIM_CCMR2_OC4M;
+ tmpccmrx &= ~TIM_CCMR2_CC4S;
+
+ /* Select the Output Compare Mode */
+ tmpccmrx |= (OC_Config->OCMode << 8);
+
+ /* Reset the Output Polarity level */
+ tmpccer &= ~TIM_CCER_CC4P;
+ /* Set the Output Compare Polarity */
+ tmpccer |= (OC_Config->OCPolarity << 12);
+
+ if(IS_TIM_BREAK_INSTANCE(TIMx))
+ {
+ assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState));
+
+ /* Reset the Output Compare IDLE State */
+ tmpcr2 &= ~TIM_CR2_OIS4;
+ /* Set the Output Idle state */
+ tmpcr2 |= (OC_Config->OCIdleState << 6);
+ }
+
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR2 */
+ TIMx->CCMR2 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR4 = OC_Config->Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+void TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim,
+ TIM_SlaveConfigTypeDef * sSlaveConfig)
+{
+ uint32_t tmpsmcr = 0;
+ uint32_t tmpccmr1 = 0;
+ uint32_t tmpccer = 0;
+
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = htim->Instance->SMCR;
+
+ /* Reset the Trigger Selection Bits */
+ tmpsmcr &= ~TIM_SMCR_TS;
+ /* Set the Input Trigger source */
+ tmpsmcr |= sSlaveConfig->InputTrigger;
+
+ /* Reset the slave mode Bits */
+ tmpsmcr &= ~TIM_SMCR_SMS;
+ /* Set the slave mode */
+ tmpsmcr |= sSlaveConfig->SlaveMode;
+
+ /* Write to TIMx SMCR */
+ htim->Instance->SMCR = tmpsmcr;
+
+ /* Configure the trigger prescaler, filter, and polarity */
+ switch (sSlaveConfig->InputTrigger)
+ {
+ case TIM_TS_ETRF:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRIGGERPRESCALER(sSlaveConfig->TriggerPrescaler));
+ assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
+ assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+ /* Configure the ETR Trigger source */
+ TIM_ETR_SetConfig(htim->Instance,
+ sSlaveConfig->TriggerPrescaler,
+ sSlaveConfig->TriggerPolarity,
+ sSlaveConfig->TriggerFilter);
+ }
+ break;
+
+ case TIM_TS_TI1F_ED:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
+ assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+
+ /* Disable the Channel 1: Reset the CC1E Bit */
+ tmpccer = htim->Instance->CCER;
+ htim->Instance->CCER &= ~TIM_CCER_CC1E;
+ tmpccmr1 = htim->Instance->CCMR1;
+
+ /* Set the filter */
+ tmpccmr1 &= ~TIM_CCMR1_IC1F;
+ tmpccmr1 |= ((sSlaveConfig->TriggerFilter) << 4);
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ htim->Instance->CCMR1 = tmpccmr1;
+ htim->Instance->CCER = tmpccer;
+
+ }
+ break;
+
+ case TIM_TS_TI1FP1:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
+ assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+
+ /* Configure TI1 Filter and Polarity */
+ TIM_TI1_ConfigInputStage(htim->Instance,
+ sSlaveConfig->TriggerPolarity,
+ sSlaveConfig->TriggerFilter);
+ }
+ break;
+
+ case TIM_TS_TI2FP2:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
+ assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+
+ /* Configure TI2 Filter and Polarity */
+ TIM_TI2_ConfigInputStage(htim->Instance,
+ sSlaveConfig->TriggerPolarity,
+ sSlaveConfig->TriggerFilter);
+ }
+ break;
+
+ case TIM_TS_ITR0:
+ {
+ /* Check the parameter */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ }
+ break;
+
+ case TIM_TS_ITR1:
+ {
+ /* Check the parameter */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ }
+ break;
+
+ case TIM_TS_ITR2:
+ {
+ /* Check the parameter */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ }
+ break;
+
+ case TIM_TS_ITR3:
+ {
+ /* Check the parameter */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ }
+ break;
+
+ default:
+ break;
+ }
+}
+
+/**
+ * @brief Configure the TI1 as Input.
+ * @param TIMx to select the TIM peripheral.
+ * @param TIM_ICPolarity : The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @arg TIM_ICPolarity_BothEdge
+ * @param TIM_ICSelection : specifies the input to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICSelection_DirectTI : TIM Input 1 is selected to be connected to IC1.
+ * @arg TIM_ICSelection_IndirectTI : TIM Input 1 is selected to be connected to IC2.
+ * @arg TIM_ICSelection_TRC : TIM Input 1 is selected to be connected to TRC.
+ * @param TIM_ICFilter : Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI2FP1
+ * (on channel2 path) is used as the input signal. Therefore CCMR1 must be
+ * protected against un-initialized filter and polarity values.
+ */
+void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter)
+{
+ uint32_t tmpccmr1 = 0;
+ uint32_t tmpccer = 0;
+
+ /* Disable the Channel 1: Reset the CC1E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC1E;
+ tmpccmr1 = TIMx->CCMR1;
+ tmpccer = TIMx->CCER;
+
+ /* Select the Input */
+ if(IS_TIM_CC2_INSTANCE(TIMx) != RESET)
+ {
+ tmpccmr1 &= ~TIM_CCMR1_CC1S;
+ tmpccmr1 |= TIM_ICSelection;
+ }
+ else
+ {
+ tmpccmr1 |= TIM_CCMR1_CC1S_0;
+ }
+
+ /* Set the filter */
+ tmpccmr1 &= ~TIM_CCMR1_IC1F;
+ tmpccmr1 |= ((TIM_ICFilter << 4) & TIM_CCMR1_IC1F);
+
+ /* Select the Polarity and set the CC1E Bit */
+ tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP);
+ tmpccer |= (TIM_ICPolarity & (TIM_CCER_CC1P | TIM_CCER_CC1NP));
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ TIMx->CCMR1 = tmpccmr1;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the Polarity and Filter for TI1.
+ * @param TIMx to select the TIM peripheral.
+ * @param TIM_ICPolarity : The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @arg TIM_ICPolarity_BothEdge
+ * @param TIM_ICFilter : Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ */
+static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter)
+{
+ uint32_t tmpccmr1 = 0;
+ uint32_t tmpccer = 0;
+
+ /* Disable the Channel 1: Reset the CC1E Bit */
+ tmpccer = TIMx->CCER;
+ TIMx->CCER &= ~TIM_CCER_CC1E;
+ tmpccmr1 = TIMx->CCMR1;
+
+ /* Set the filter */
+ tmpccmr1 &= ~TIM_CCMR1_IC1F;
+ tmpccmr1 |= (TIM_ICFilter << 4);
+
+ /* Select the Polarity and set the CC1E Bit */
+ tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP);
+ tmpccer |= TIM_ICPolarity;
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ TIMx->CCMR1 = tmpccmr1;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the TI2 as Input.
+ * @param TIMx to select the TIM peripheral
+ * @param TIM_ICPolarity : The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @arg TIM_ICPolarity_BothEdge
+ * @param TIM_ICSelection : specifies the input to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICSelection_DirectTI : TIM Input 2 is selected to be connected to IC2.
+ * @arg TIM_ICSelection_IndirectTI : TIM Input 2 is selected to be connected to IC1.
+ * @arg TIM_ICSelection_TRC : TIM Input 2 is selected to be connected to TRC.
+ * @param TIM_ICFilter : Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI1FP2
+ * (on channel1 path) is used as the input signal. Therefore CCMR1 must be
+ * protected against un-initialized filter and polarity values.
+ */
+static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter)
+{
+ uint32_t tmpccmr1 = 0;
+ uint32_t tmpccer = 0;
+
+ /* Disable the Channel 2: Reset the CC2E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC2E;
+ tmpccmr1 = TIMx->CCMR1;
+ tmpccer = TIMx->CCER;
+
+ /* Select the Input */
+ tmpccmr1 &= ~TIM_CCMR1_CC2S;
+ tmpccmr1 |= (TIM_ICSelection << 8);
+
+ /* Set the filter */
+ tmpccmr1 &= ~TIM_CCMR1_IC2F;
+ tmpccmr1 |= ((TIM_ICFilter << 12) & TIM_CCMR1_IC2F);
+
+ /* Select the Polarity and set the CC2E Bit */
+ tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP);
+ tmpccer |= ((TIM_ICPolarity << 4) & (TIM_CCER_CC2P | TIM_CCER_CC2NP));
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ TIMx->CCMR1 = tmpccmr1 ;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the Polarity and Filter for TI2.
+ * @param TIMx to select the TIM peripheral.
+ * @param TIM_ICPolarity : The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @arg TIM_ICPolarity_BothEdge
+ * @param TIM_ICFilter : Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ */
+static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter)
+{
+ uint32_t tmpccmr1 = 0;
+ uint32_t tmpccer = 0;
+
+ /* Disable the Channel 2: Reset the CC2E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC2E;
+ tmpccmr1 = TIMx->CCMR1;
+ tmpccer = TIMx->CCER;
+
+ /* Set the filter */
+ tmpccmr1 &= ~TIM_CCMR1_IC2F;
+ tmpccmr1 |= (TIM_ICFilter << 12);
+
+ /* Select the Polarity and set the CC2E Bit */
+ tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP);
+ tmpccer |= (TIM_ICPolarity << 4);
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ TIMx->CCMR1 = tmpccmr1 ;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the TI3 as Input.
+ * @param TIMx to select the TIM peripheral
+ * @param TIM_ICPolarity : The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @arg TIM_ICPolarity_BothEdge
+ * @param TIM_ICSelection : specifies the input to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICSelection_DirectTI : TIM Input 3 is selected to be connected to IC3.
+ * @arg TIM_ICSelection_IndirectTI : TIM Input 3 is selected to be connected to IC4.
+ * @arg TIM_ICSelection_TRC : TIM Input 3 is selected to be connected to TRC.
+ * @param TIM_ICFilter : Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI3FP4
+ * (on channel1 path) is used as the input signal. Therefore CCMR2 must be
+ * protected against un-initialized filter and polarity values.
+ */
+static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter)
+{
+ uint32_t tmpccmr2 = 0;
+ uint32_t tmpccer = 0;
+
+ /* Disable the Channel 3: Reset the CC3E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC3E;
+ tmpccmr2 = TIMx->CCMR2;
+ tmpccer = TIMx->CCER;
+
+ /* Select the Input */
+ tmpccmr2 &= ~TIM_CCMR2_CC3S;
+ tmpccmr2 |= TIM_ICSelection;
+
+ /* Set the filter */
+ tmpccmr2 &= ~TIM_CCMR2_IC3F;
+ tmpccmr2 |= ((TIM_ICFilter << 4) & TIM_CCMR2_IC3F);
+
+ /* Select the Polarity and set the CC3E Bit */
+ tmpccer &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP);
+ tmpccer |= ((TIM_ICPolarity << 8) & (TIM_CCER_CC3P | TIM_CCER_CC3NP));
+
+ /* Write to TIMx CCMR2 and CCER registers */
+ TIMx->CCMR2 = tmpccmr2;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the TI4 as Input.
+ * @param TIMx to select the TIM peripheral
+ * @param TIM_ICPolarity : The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @arg TIM_ICPolarity_BothEdge
+ * @param TIM_ICSelection : specifies the input to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICSelection_DirectTI : TIM Input 4 is selected to be connected to IC4.
+ * @arg TIM_ICSelection_IndirectTI : TIM Input 4 is selected to be connected to IC3.
+ * @arg TIM_ICSelection_TRC : TIM Input 4 is selected to be connected to TRC.
+ * @param TIM_ICFilter : Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI4FP3
+ * (on channel1 path) is used as the input signal. Therefore CCMR2 must be
+ * protected against un-initialized filter and polarity values.
+ * @retval None
+ */
+static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter)
+{
+ uint32_t tmpccmr2 = 0;
+ uint32_t tmpccer = 0;
+
+ /* Disable the Channel 4: Reset the CC4E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC4E;
+ tmpccmr2 = TIMx->CCMR2;
+ tmpccer = TIMx->CCER;
+
+ /* Select the Input */
+ tmpccmr2 &= ~TIM_CCMR2_CC4S;
+ tmpccmr2 |= (TIM_ICSelection << 8);
+
+ /* Set the filter */
+ tmpccmr2 &= ~TIM_CCMR2_IC4F;
+ tmpccmr2 |= ((TIM_ICFilter << 12) & TIM_CCMR2_IC4F);
+
+ /* Select the Polarity and set the CC4E Bit */
+ tmpccer &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP);
+ tmpccer |= ((TIM_ICPolarity << 12) & (TIM_CCER_CC4P | TIM_CCER_CC4NP));
+
+ /* Write to TIMx CCMR2 and CCER registers */
+ TIMx->CCMR2 = tmpccmr2;
+ TIMx->CCER = tmpccer ;
+}
+
+/**
+ * @brief Selects the Input Trigger source
+ * @param TIMx to select the TIM peripheral
+ * @param InputTriggerSource : The Input Trigger source.
+ * This parameter can be one of the following values:
+ * @arg TIM_TS_ITR0 : Internal Trigger 0
+ * @arg TIM_TS_ITR1 : Internal Trigger 1
+ * @arg TIM_TS_ITR2 : Internal Trigger 2
+ * @arg TIM_TS_ITR3 : Internal Trigger 3
+ * @arg TIM_TS_TI1F_ED : TI1 Edge Detector
+ * @arg TIM_TS_TI1FP1 : Filtered Timer Input 1
+ * @arg TIM_TS_TI2FP2 : Filtered Timer Input 2
+ * @arg TIM_TS_ETRF : External Trigger input
+ * @retval None
+ */
+static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint16_t InputTriggerSource)
+{
+ uint32_t tmpsmcr = 0;
+
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = TIMx->SMCR;
+ /* Reset the TS Bits */
+ tmpsmcr &= ~TIM_SMCR_TS;
+ /* Set the Input Trigger source and the slave mode*/
+ tmpsmcr |= InputTriggerSource | TIM_SLAVEMODE_EXTERNAL1;
+ /* Write to TIMx SMCR */
+ TIMx->SMCR = tmpsmcr;
+}
+/**
+ * @brief Configures the TIMx External Trigger (ETR).
+ * @param TIMx to select the TIM peripheral
+ * @param TIM_ExtTRGPrescaler : The external Trigger Prescaler.
+ * This parameter can be one of the following values:
+ * @arg TIM_ExtTRGPSC_DIV1 : ETRP Prescaler OFF.
+ * @arg TIM_ExtTRGPSC_DIV2 : ETRP frequency divided by 2.
+ * @arg TIM_ExtTRGPSC_DIV4 : ETRP frequency divided by 4.
+ * @arg TIM_ExtTRGPSC_DIV8 : ETRP frequency divided by 8.
+ * @param TIM_ExtTRGPolarity : The external Trigger Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ExtTRGPolarity_Inverted : active low or falling edge active.
+ * @arg TIM_ExtTRGPolarity_NonInverted : active high or rising edge active.
+ * @param ExtTRGFilter : External Trigger Filter.
+ * This parameter must be a value between 0x00 and 0x0F
+ * @retval None
+ */
+static void TIM_ETR_SetConfig(TIM_TypeDef* TIMx, uint32_t TIM_ExtTRGPrescaler,
+ uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter)
+{
+ uint32_t tmpsmcr = 0;
+
+ tmpsmcr = TIMx->SMCR;
+
+ /* Reset the ETR Bits */
+ tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP);
+
+ /* Set the Prescaler, the Filter value and the Polarity */
+ tmpsmcr |= (uint32_t)(TIM_ExtTRGPrescaler | (TIM_ExtTRGPolarity | (ExtTRGFilter << 8)));
+
+ /* Write to TIMx SMCR */
+ TIMx->SMCR = tmpsmcr;
+}
+
+/**
+ * @brief Enables or disables the TIM Capture Compare Channel x.
+ * @param TIMx to select the TIM peripheral
+ * @param Channel : specifies the TIM Channel
+ * This parameter can be one of the following values:
+ * @arg TIM_Channel_1 : TIM Channel 1
+ * @arg TIM_Channel_2 : TIM Channel 2
+ * @arg TIM_Channel_3 : TIM Channel 3
+ * @arg TIM_Channel_4 : TIM Channel 4
+ * @param ChannelState : specifies the TIM Channel CCxE bit new state.
+ * This parameter can be: TIM_CCx_ENABLE or TIM_CCx_Disable.
+ * @retval None
+ */
+void TIM_CCxChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelState)
+{
+ uint32_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(TIMx));
+ assert_param(IS_TIM_CHANNELS(Channel));
+
+ tmp = TIM_CCER_CC1E << Channel;
+
+ /* Reset the CCxE Bit */
+ TIMx->CCER &= ~tmp;
+
+ /* Set or reset the CCxE Bit */
+ TIMx->CCER |= (uint32_t)(ChannelState << Channel);
+}
+
+
+/**
+ * @}
+ */
+
+#endif /* HAL_TIM_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/src/stm32f0xx_hal_tim_ex.c b/f0/src/stm32f0xx_hal_tim_ex.c
new file mode 100755
index 0000000000000000000000000000000000000000..c63a0964dda58bc050f9f850cb4ae12a1515e65b
--- /dev/null
+++ b/f0/src/stm32f0xx_hal_tim_ex.c
@@ -0,0 +1,1835 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_tim_ex.c
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief TIM HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Timer Extended peripheral:
+ * + Time Hall Sensor Interface Initialization
+ * + Time Hall Sensor Interface Start
+ * + Time Complementary signal bread and dead time configuration
+ * + Time Master and Slave synchronization configuration
+ * + Timer remapping capabilities configuration
+ @verbatim
+ ==============================================================================
+ ##### TIMER Extended features #####
+ ==============================================================================
+ [..]
+ The Timer Extended features include:
+ (#) Complementary outputs with programmable dead-time for :
+ (++) Output Compare
+ (++) PWM generation (Edge and Center-aligned Mode)
+ (++) One-pulse mode output
+ (#) Synchronization circuit to control the timer with external signals and to
+ interconnect several timers together.
+ (#) Break input to put the timer output signals in reset state or in a known state.
+ (#) Supports incremental (quadrature) encoder and hall-sensor circuitry for
+ positioning purposes
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#) Initialize the TIM low level resources by implementing the following functions
+ depending from feature used :
+ (++) Complementary Output Compare : HAL_TIM_OC_MspInit()
+ (++) Complementary PWM generation : HAL_TIM_PWM_MspInit()
+ (++) Complementary One-pulse mode output : HAL_TIM_OnePulse_MspInit()
+ (++) Hall Sensor output : HAL_TIM_HallSensor_MspInit()
+
+ (#) Initialize the TIM low level resources :
+ (##) Enable the TIM interface clock using __TIMx_CLK_ENABLE();
+ (##) TIM pins configuration
+ (+++) Enable the clock for the TIM GPIOs using the following function:
+ __GPIOx_CLK_ENABLE();
+ (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init();
+
+ (#) The external Clock can be configured, if needed (the default clock is the
+ internal clock from the APBx), using the following function:
+ HAL_TIM_ConfigClockSource, the clock configuration should be done before
+ any start function.
+
+ (#) Configure the TIM in the desired functioning mode using one of the
+ initialization function of this driver:
+ (++) HAL_TIMEx_HallSensor_Init and HAL_TIMEx_ConfigCommutationEvent: to use the
+ Timer Hall Sensor Interface and the commutation event with the corresponding
+ Interrupt and DMA request if needed (Note that One Timer is used to interface
+ with the Hall sensor Interface and another Timer should be used to use
+ the commutation event).
+
+ (#) Activate the TIM peripheral using one of the start functions:
+ (++) Complementary Output Compare : HAL_TIMEx_OCN_Start(), HAL_TIMEx_OCN_Start_DMA(), HAL_TIMEx_OCN_Start_IT()
+ (++) Complementary PWM generation : HAL_TIMEx_PWMN_Start(), HAL_TIMEx_PWMN_Start_DMA(), HAL_TIMEx_PWMN_Start_IT()
+ (++) Complementary One-pulse mode output : HAL_TIMEx_OnePulseN_Start(), HAL_TIMEx_OnePulseN_Start_IT()
+ (++) Hall Sensor output : HAL_TIMEx_HallSensor_Start(), HAL_TIMEx_HallSensor_Start_DMA(), HAL_TIMEx_HallSensor_Start_IT().
+
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+*/
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup TIMEx TIMEx Extended HAL module driver
+ * @brief TIM Extended HAL module driver
+ * @{
+ */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+
+/** @defgroup TIMEx_Private_Functions TIMEx Private Functions
+ * @{
+ */
+static void TIM_CCxNChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelNState);
+/**
+ * @}
+ */
+
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup TIMEx_Exported_Functions TIMEx Exported Functions
+ * @{
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group1 Timer Hall Sensor functions
+ * @brief Timer Hall Sensor functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Timer Hall Sensor functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure TIM HAL Sensor.
+ (+) De-initialize TIM HAL Sensor.
+ (+) Start the Hall Sensor Interface.
+ (+) Stop the Hall Sensor Interface.
+ (+) Start the Hall Sensor Interface and enable interrupts.
+ (+) Stop the Hall Sensor Interface and disable interrupts.
+ (+) Start the Hall Sensor Interface and enable DMA transfers.
+ (+) Stop the Hall Sensor Interface and disable DMA transfers.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM Hall Sensor Interface and create the associated handle.
+ * @param htim : TIM Encoder Interface handle
+ * @param sConfig : TIM Hall Sensor configuration structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef* sConfig)
+{
+ TIM_OC_InitTypeDef OC_Config;
+
+ /* Check the TIM handle allocation */
+ if(htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+ assert_param(IS_TIM_IC_POLARITY(sConfig->IC1Polarity));
+ assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler));
+ assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter));
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_TIMEx_HallSensor_MspInit(htim);
+
+ /* Configure the Time base in the Encoder Mode */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Configure the Channel 1 as Input Channel to interface with the three Outputs of the Hall sensor */
+ TIM_TI1_SetConfig(htim->Instance, sConfig->IC1Polarity, TIM_ICSELECTION_TRC, sConfig->IC1Filter);
+
+ /* Reset the IC1PSC Bits */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC;
+ /* Set the IC1PSC value */
+ htim->Instance->CCMR1 |= sConfig->IC1Prescaler;
+
+ /* Enable the Hall sensor interface (XOR function of the three inputs) */
+ htim->Instance->CR2 |= TIM_CR2_TI1S;
+
+ /* Select the TIM_TS_TI1F_ED signal as Input trigger for the TIM */
+ htim->Instance->SMCR &= ~TIM_SMCR_TS;
+ htim->Instance->SMCR |= TIM_TS_TI1F_ED;
+
+ /* Use the TIM_TS_TI1F_ED signal to reset the TIM counter each edge detection */
+ htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+ htim->Instance->SMCR |= TIM_SLAVEMODE_RESET;
+
+ /* Program channel 2 in PWM 2 mode with the desired Commutation_Delay*/
+ OC_Config.OCFastMode = TIM_OCFAST_DISABLE;
+ OC_Config.OCIdleState = TIM_OCIDLESTATE_RESET;
+ OC_Config.OCMode = TIM_OCMODE_PWM2;
+ OC_Config.OCNIdleState = TIM_OCNIDLESTATE_RESET;
+ OC_Config.OCNPolarity = TIM_OCNPOLARITY_HIGH;
+ OC_Config.OCPolarity = TIM_OCPOLARITY_HIGH;
+ OC_Config.Pulse = sConfig->Commutation_Delay;
+
+ TIM_OC2_SetConfig(htim->Instance, &OC_Config);
+
+ /* Select OC2REF as trigger output on TRGO: write the MMS bits in the TIMx_CR2
+ register to 101 */
+ htim->Instance->CR2 &= ~TIM_CR2_MMS;
+ htim->Instance->CR2 |= TIM_TRGO_OC2REF;
+
+ /* Initialize the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM Hall Sensor interface
+ * @param htim : TIM Hall Sensor handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+ HAL_TIMEx_HallSensor_MspDeInit(htim);
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM Hall Sensor MSP.
+ * @param htim : TIM handle
+ * @retval None
+ */
+__weak void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIMEx_HallSensor_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM Hall Sensor MSP.
+ * @param htim : TIM handle
+ * @retval None
+ */
+__weak void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIMEx_HallSensor_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the TIM Hall Sensor Interface.
+ * @param htim : TIM Hall Sensor handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+
+ /* Enable the Input Capture channels 1
+ (in the Hall Sensor Interface the Three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Hall sensor Interface.
+ * @param htim : TIM Hall Sensor handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+
+ /* Disable the Input Capture channels 1, 2 and 3
+ (in the Hall Sensor Interface the Three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Hall Sensor Interface in interrupt mode.
+ * @param htim : TIM Hall Sensor handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+
+ /* Enable the capture compare Interrupts 1 event */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+
+ /* Enable the Input Capture channels 1
+ (in the Hall Sensor Interface the Three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Hall Sensor Interface in interrupt mode.
+ * @param htim : TIM handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+
+ /* Disable the Input Capture channels 1
+ (in the Hall Sensor Interface the Three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare Interrupts event */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Hall Sensor Interface in DMA mode.
+ * @param htim : TIM Hall Sensor handle
+ * @param pData : The destination Buffer address.
+ * @param Length : The length of data to be transferred from TIM peripheral to memory.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if(((uint32_t)pData == 0 ) && (Length > 0))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ /* Enable the Input Capture channels 1
+ (in the Hall Sensor Interface the Three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+
+ /* Set the DMA Input Capture 1 Callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA channel for Capture 1*/
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length);
+
+ /* Enable the capture compare 1 Interrupt */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Hall Sensor Interface in DMA mode.
+ * @param htim : TIM handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+
+ /* Disable the Input Capture channels 1
+ (in the Hall Sensor Interface the Three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+
+ /* Disable the capture compare Interrupts 1 event */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group2 Timer Complementary Output Compare functions
+ * @brief Timer Complementary Output Compare functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Timer Complementary Output Compare functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Start the Complementary Output Compare/PWM.
+ (+) Stop the Complementary Output Compare/PWM.
+ (+) Start the Complementary Output Compare/PWM and enable interrupts.
+ (+) Stop the Complementary Output Compare/PWM and disable interrupts.
+ (+) Start the Complementary Output Compare/PWM and enable DMA transfers.
+ (+) Stop the Complementary Output Compare/PWM and disable DMA transfers.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Starts the TIM Output Compare signal generation on the complementary
+ * output.
+ * @param htim : TIM Output Compare handle
+ * @param Channel : TIM Channel to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ /* Enable the Capture compare channel N */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Ouput */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Output Compare signal generation on the complementary
+ * output.
+ * @param htim : TIM handle
+ * @param Channel : TIM Channel to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ /* Disable the Capture compare channel N */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+ /* Disable the Main Ouput */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Output Compare signal generation in interrupt mode
+ * on the complementary output.
+ * @param htim : TIM OC handle
+ * @param Channel : TIM Channel to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Enable the TIM Output Compare interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Enable the TIM Output Compare interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Enable the TIM Output Compare interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Enable the TIM Output Compare interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the TIM Break interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK);
+
+ /* Enable the Capture compare channel N */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Ouput */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Output Compare signal generation in interrupt mode
+ * on the complementary output.
+ * @param htim : TIM Output Compare handle
+ * @param Channel : TIM Channel to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ uint32_t tmpccer = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Output Compare interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Output Compare interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Output Compare interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Output Compare interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Capture compare channel N */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+ /* Disable the TIM Break interrupt (only if no more channel is active) */
+ tmpccer = htim->Instance->CCER;
+ if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == RESET)
+ {
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK);
+ }
+
+ /* Disable the Main Ouput */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Output Compare signal generation in DMA mode
+ * on the complementary output.
+ * @param htim : TIM Output Compare handle
+ * @param Channel : TIM Channel to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param pData : The source Buffer address.
+ * @param Length : The length of data to be transferred from memory to TIM peripheral
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if(((uint32_t)pData == 0 ) && (Length > 0))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length);
+
+ /* Enable the TIM Output Compare DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length);
+
+ /* Enable the TIM Output Compare DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+{
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length);
+
+ /* Enable the TIM Output Compare DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length);
+
+ /* Enable the TIM Output Compare DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the Capture compare channel N */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Ouput */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Output Compare signal generation in DMA mode
+ * on the complementary output.
+ * @param htim : TIM Output Compare handle
+ * @param Channel : TIM Channel to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Output Compare DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Output Compare DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Output Compare DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Output Compare interrupt */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Capture compare channel N */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+ /* Disable the Main Ouput */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group3 Timer Complementary PWM functions
+ * @brief Timer Complementary PWM functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Timer Complementary PWM functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Start the Complementary PWM.
+ (+) Stop the Complementary PWM.
+ (+) Start the Complementary PWM and enable interrupts.
+ (+) Stop the Complementary PWM and disable interrupts.
+ (+) Start the Complementary PWM and enable DMA transfers.
+ (+) Stop the Complementary PWM and disable DMA transfers.
+ (+) Start the Complementary Input Capture measurement.
+ (+) Stop the Complementary Input Capture.
+ (+) Start the Complementary Input Capture and enable interrupts.
+ (+) Stop the Complementary Input Capture and disable interrupts.
+ (+) Start the Complementary Input Capture and enable DMA transfers.
+ (+) Stop the Complementary Input Capture and disable DMA transfers.
+ (+) Start the Complementary One Pulse generation.
+ (+) Stop the Complementary One Pulse.
+ (+) Start the Complementary One Pulse and enable interrupts.
+ (+) Stop the Complementary One Pulse and disable interrupts.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Starts the PWM signal generation on the complementary output.
+ * @param htim : TIM handle
+ * @param Channel : TIM Channel to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ /* Enable the complementary PWM output */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Ouput */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the PWM signal generation on the complementary output.
+ * @param htim : TIM handle
+ * @param Channel : TIM Channel to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ /* Disable the complementary PWM output */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+ /* Disable the Main Ouput */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the PWM signal generation in interrupt mode on the
+ * complementary output.
+ * @param htim : TIM handle
+ * @param Channel : TIM Channel to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Enable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Enable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Enable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Enable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the TIM Break interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK);
+
+ /* Enable the complementary PWM output */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Ouput */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the PWM signal generation in interrupt mode on the
+ * complementary output.
+ * @param htim : TIM handle
+ * @param Channel : TIM Channel to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ uint32_t tmpccer = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the complementary PWM output */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+ /* Disable the TIM Break interrupt (only if no more channel is active) */
+ tmpccer = htim->Instance->CCER;
+ if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == RESET)
+ {
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK);
+ }
+
+ /* Disable the Main Ouput */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM PWM signal generation in DMA mode on the
+ * complementary output
+ * @param htim : TIM handle
+ * @param Channel : TIM Channel to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param pData : The source Buffer address.
+ * @param Length : The length of data to be transferred from memory to TIM peripheral
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if(((uint32_t)pData == 0 ) && (Length > 0))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length);
+
+ /* Enable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length);
+
+ /* Enable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length);
+
+ /* Enable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length);
+
+ /* Enable the TIM Capture/Compare 4 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the complementary PWM output */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Ouput */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM PWM signal generation in DMA mode on the complementary
+ * output
+ * @param htim : TIM handle
+ * @param Channel : TIM Channel to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the complementary PWM output */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+ /* Disable the Main Ouput */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group4 Timer Complementary One Pulse functions
+ * @brief Timer Complementary One Pulse functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Timer Complementary One Pulse functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Start the Complementary One Pulse generation.
+ (+) Stop the Complementary One Pulse.
+ (+) Start the Complementary One Pulse and enable interrupts.
+ (+) Stop the Complementary One Pulse and disable interrupts.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Starts the TIM One Pulse signal generation on the complemetary
+ * output.
+ * @param htim : TIM One Pulse handle
+ * @param OutputChannel : TIM Channel to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
+
+ /* Enable the complementary One Pulse output */
+ TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Ouput */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM One Pulse signal generation on the complementary
+ * output.
+ * @param htim : TIM One Pulse handle
+ * @param OutputChannel : TIM Channel to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
+
+ /* Disable the complementary One Pulse output */
+ TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE);
+
+ /* Disable the Main Ouput */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM One Pulse signal generation in interrupt mode on the
+ * complementary channel.
+ * @param htim : TIM One Pulse handle
+ * @param OutputChannel : TIM Channel to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
+
+ /* Enable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+
+ /* Enable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+
+ /* Enable the complementary One Pulse output */
+ TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Ouput */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+
+/**
+ * @brief Stops the TIM One Pulse signal generation in interrupt mode on the
+ * complementary channel.
+ * @param htim : TIM One Pulse handle
+ * @param OutputChannel : TIM Channel to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
+
+ /* Disable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+
+ /* Disable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+
+ /* Disable the complementary One Pulse output */
+ TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE);
+
+ /* Disable the Main Ouput */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+
+
+/**
+ * @}
+ */
+/** @defgroup TIMEx_Exported_Functions_Group5 Peripheral Control functions
+ * @brief Peripheral Control functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral Control functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Configure the commutation event in case of use of the Hall sensor interface.
+ (+) Configure Complementary channels, break features and dead time.
+ (+) Configure Master synchronization.
+ (+) Configure timer remapping capabilities.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Configure the TIM commutation event sequence.
+ * @note: this function is mandatory to use the commutation event in order to
+ * update the configuration at each commutation detection on the TRGI input of the Timer,
+ * the typical use of this feature is with the use of another Timer(interface Timer)
+ * configured in Hall sensor interface, this interface Timer will generate the
+ * commutation at its TRGO output (connected to Timer used in this function) each time
+ * the TI1 of the Interface Timer detect a commutation at its input TI1.
+ * @param htim : TIM handle
+ * @param InputTrigger : the Internal trigger corresponding to the Timer Interfacing with the Hall sensor
+ * This parameter can be one of the following values:
+ * @arg TIM_TS_ITR0: Internal trigger 0 selected
+ * @arg TIM_TS_ITR1: Internal trigger 1 selected
+ * @arg TIM_TS_ITR2: Internal trigger 2 selected
+ * @arg TIM_TS_ITR3: Internal trigger 3 selected
+ * @arg TIM_TS_NONE: No trigger is needed
+ * @param CommutationSource : the Commutation Event source
+ * This parameter can be one of the following values:
+ * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer
+ * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger));
+
+ __HAL_LOCK(htim);
+
+ if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) ||
+ (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3))
+ {
+ /* Select the Input trigger */
+ htim->Instance->SMCR &= ~TIM_SMCR_TS;
+ htim->Instance->SMCR |= InputTrigger;
+ }
+
+ /* Select the Capture Compare preload feature */
+ htim->Instance->CR2 |= TIM_CR2_CCPC;
+ /* Select the Commutation event source */
+ htim->Instance->CR2 &= ~TIM_CR2_CCUS;
+ htim->Instance->CR2 |= CommutationSource;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configure the TIM commutation event sequence with interrupt.
+ * @note: this function is mandatory to use the commutation event in order to
+ * update the configuration at each commutation detection on the TRGI input of the Timer,
+ * the typical use of this feature is with the use of another Timer(interface Timer)
+ * configured in Hall sensor interface, this interface Timer will generate the
+ * commutation at its TRGO output (connected to Timer used in this function) each time
+ * the TI1 of the Interface Timer detect a commutation at its input TI1.
+ * @param htim : TIM handle
+ * @param InputTrigger : the Internal trigger corresponding to the Timer Interfacing with the Hall sensor
+ * This parameter can be one of the following values:
+ * @arg TIM_TS_ITR0: Internal trigger 0 selected
+ * @arg TIM_TS_ITR1: Internal trigger 1 selected
+ * @arg TIM_TS_ITR2: Internal trigger 2 selected
+ * @arg TIM_TS_ITR3: Internal trigger 3 selected
+ * @arg TIM_TS_NONE: No trigger is needed
+ * @param CommutationSource : the Commutation Event source
+ * This parameter can be one of the following values:
+ * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer
+ * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger));
+
+ __HAL_LOCK(htim);
+
+ if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) ||
+ (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3))
+ {
+ /* Select the Input trigger */
+ htim->Instance->SMCR &= ~TIM_SMCR_TS;
+ htim->Instance->SMCR |= InputTrigger;
+ }
+
+ /* Select the Capture Compare preload feature */
+ htim->Instance->CR2 |= TIM_CR2_CCPC;
+ /* Select the Commutation event source */
+ htim->Instance->CR2 &= ~TIM_CR2_CCUS;
+ htim->Instance->CR2 |= CommutationSource;
+
+ /* Enable the Commutation Interrupt Request */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_COM);
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configure the TIM commutation event sequence with DMA.
+ * @note: this function is mandatory to use the commutation event in order to
+ * update the configuration at each commutation detection on the TRGI input of the Timer,
+ * the typical use of this feature is with the use of another Timer(interface Timer)
+ * configured in Hall sensor interface, this interface Timer will generate the
+ * commutation at its TRGO output (connected to Timer used in this function) each time
+ * the TI1 of the Interface Timer detect a commutation at its input TI1.
+ * @note: The user should configure the DMA in his own software, in This function only the COMDE bit is set
+ * @param htim : TIM handle
+ * @param InputTrigger : the Internal trigger corresponding to the Timer Interfacing with the Hall sensor
+ * This parameter can be one of the following values:
+ * @arg TIM_TS_ITR0: Internal trigger 0 selected
+ * @arg TIM_TS_ITR1: Internal trigger 1 selected
+ * @arg TIM_TS_ITR2: Internal trigger 2 selected
+ * @arg TIM_TS_ITR3: Internal trigger 3 selected
+ * @arg TIM_TS_NONE: No trigger is needed
+ * @param CommutationSource : the Commutation Event source
+ * This parameter can be one of the following values:
+ * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer
+ * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger));
+
+ __HAL_LOCK(htim);
+
+ if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) ||
+ (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3))
+ {
+ /* Select the Input trigger */
+ htim->Instance->SMCR &= ~TIM_SMCR_TS;
+ htim->Instance->SMCR |= InputTrigger;
+ }
+
+ /* Select the Capture Compare preload feature */
+ htim->Instance->CR2 |= TIM_CR2_CCPC;
+ /* Select the Commutation event source */
+ htim->Instance->CR2 &= ~TIM_CR2_CCUS;
+ htim->Instance->CR2 |= CommutationSource;
+
+ /* Enable the Commutation DMA Request */
+ /* Set the DMA Commutation Callback */
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = HAL_TIMEx_DMACommutationCplt;
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = HAL_TIM_DMAError;
+
+ /* Enable the Commutation DMA Request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_COM);
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the TIM in master mode.
+ * @param htim : TIM handle.
+ * @param sMasterConfig : pointer to a TIM_MasterConfigTypeDef structure that
+ * contains the selected trigger output (TRGO) and the Master/Slave
+ * mode.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, TIM_MasterConfigTypeDef * sMasterConfig)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_MASTER_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRGO_SOURCE(sMasterConfig->MasterOutputTrigger));
+ assert_param(IS_TIM_MSM_STATE(sMasterConfig->MasterSlaveMode));
+
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Reset the MMS Bits */
+ htim->Instance->CR2 &= ~TIM_CR2_MMS;
+ /* Select the TRGO source */
+ htim->Instance->CR2 |= sMasterConfig->MasterOutputTrigger;
+
+ /* Reset the MSM Bit */
+ htim->Instance->SMCR &= ~TIM_SMCR_MSM;
+ /* Set or Reset the MSM Bit */
+ htim->Instance->SMCR |= sMasterConfig->MasterSlaveMode;
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the Break feature, dead time, Lock level, OSSI/OSSR State
+ * and the AOE(automatic output enable).
+ * @param htim : TIM handle
+ * @param sBreakDeadTimeConfig : pointer to a TIM_ConfigBreakDeadConfigTypeDef structure that
+ * contains the BDTR Register configuration information for the TIM peripheral.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim,
+ TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_OSSR_STATE(sBreakDeadTimeConfig->OffStateRunMode));
+ assert_param(IS_TIM_OSSI_STATE(sBreakDeadTimeConfig->OffStateIDLEMode));
+ assert_param(IS_TIM_LOCK_LEVEL(sBreakDeadTimeConfig->LockLevel));
+ assert_param(IS_TIM_DEADTIME(sBreakDeadTimeConfig->DeadTime));
+ assert_param(IS_TIM_BREAK_STATE(sBreakDeadTimeConfig->BreakState));
+ assert_param(IS_TIM_BREAK_POLARITY(sBreakDeadTimeConfig->BreakPolarity));
+ assert_param(IS_TIM_AUTOMATIC_OUTPUT_STATE(sBreakDeadTimeConfig->AutomaticOutput));
+
+ /* Process Locked */
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Set the Lock level, the Break enable Bit and the Polarity, the OSSR State,
+ the OSSI State, the dead time value and the Automatic Output Enable Bit */
+ htim->Instance->BDTR = (uint32_t)sBreakDeadTimeConfig->OffStateRunMode |
+ sBreakDeadTimeConfig->OffStateIDLEMode |
+ sBreakDeadTimeConfig->LockLevel |
+ sBreakDeadTimeConfig->DeadTime |
+ sBreakDeadTimeConfig->BreakState |
+ sBreakDeadTimeConfig->BreakPolarity |
+ sBreakDeadTimeConfig->AutomaticOutput;
+
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the TIM14 Remapping input capabilities.
+ * @param htim : TIM handle.
+ * @param Remap : specifies the TIM remapping source.
+ * This parameter can be one of the following values:
+ * @arg TIM_TIM14_GPIO: TIM14 TI1 is connected to GPIO
+ * @arg TIM_TIM14_RTC: TIM14 TI1 is connected to RTC_clock
+ * @arg TIM_TIM14_HSE: TIM14 TI1 is connected to HSE/32
+ * @arg TIM_TIM14_MCO: TIM14 TI1 is connected to MCO
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap)
+{
+ __HAL_LOCK(htim);
+
+ /* Check parameters */
+ assert_param(IS_TIM_REMAP_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_REMAP(Remap));
+
+ /* Set the Timer remapping configuration */
+ htim->Instance->OR = Remap;
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group6 Extension Callbacks functions
+ * @brief Extension Callbacks functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Extension Callbacks functions #####
+ ==============================================================================
+ [..]
+ This section provides Extension TIM callback functions:
+ (+) Timer Commutation callback
+ (+) Timer Break callback
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Hall commutation changed callback in non blocking mode
+ * @param htim : TIM handle
+ * @retval None
+ */
+__weak void HAL_TIMEx_CommutationCallback(TIM_HandleTypeDef *htim)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIMEx_CommutationCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Hall Break detection callback in non blocking mode
+ * @param htim : TIM handle
+ * @retval None
+ */
+__weak void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIMEx_BreakCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief TIM DMA Commutation callback.
+ * @param hdma : pointer to DMA handle.
+ * @retval None
+ */
+void HAL_TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ htim->State= HAL_TIM_STATE_READY;
+
+ HAL_TIMEx_CommutationCallback(htim);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group7 Extension Peripheral State functions
+ * @brief Extension Peripheral State functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Extension Peripheral State functions #####
+ ==============================================================================
+ [..]
+ This subsection permit to get in run-time the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the TIM Hall Sensor interface state
+ * @param htim : TIM Hall Sensor handle
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Enables or disables the TIM Capture Compare Channel xN.
+ * @param TIMx to select the TIM peripheral
+ * @param Channel : specifies the TIM Channel
+ * This parameter can be one of the following values:
+ * @arg TIM_Channel_1: TIM Channel 1
+ * @arg TIM_Channel_2: TIM Channel 2
+ * @arg TIM_Channel_3: TIM Channel 3
+ * @param ChannelNState : specifies the TIM Channel CCxNE bit new state.
+ * This parameter can be: TIM_CCxN_ENABLE or TIM_CCxN_Disable.
+ * @retval None
+ */
+static void TIM_CCxNChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelNState)
+{
+ uint32_t tmp = 0;
+
+ tmp = TIM_CCER_CC1NE << Channel;
+
+ /* Reset the CCxNE Bit */
+ TIMx->CCER &= ~tmp;
+
+ /* Set or reset the CCxNE Bit */
+ TIMx->CCER |= (uint32_t)(ChannelNState << Channel);
+}
+
+/**
+ * @}
+ */
+
+#endif /* HAL_TIM_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/src/stm32f0xx_hal_tsc.c b/f0/src/stm32f0xx_hal_tsc.c
new file mode 100755
index 0000000000000000000000000000000000000000..2b3a88aff857c124309c360350b2cd4e2c8ebcc9
--- /dev/null
+++ b/f0/src/stm32f0xx_hal_tsc.c
@@ -0,0 +1,791 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_tsc.c
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief This file provides firmware functions to manage the following
+ * functionalities of the Touch Sensing Controller (TSC) peripheral:
+ * + Initialization and DeInitialization
+ * + Channel IOs, Shield IOs and Sampling IOs configuration
+ * + Start and Stop an acquisition
+ * + Read acquisition result
+ * + Interrupts and flags management
+ *
+ @verbatim
+================================================================================
+ ##### TSC specific features #####
+================================================================================
+ [..]
+ (#) Proven and robust surface charge transfer acquisition principle
+
+ (#) Supports up to 3 capacitive sensing channels per group
+
+ (#) Capacitive sensing channels can be acquired in parallel offering a very good
+ response time
+
+ (#) Spread spectrum feature to improve system robustness in noisy environments
+
+ (#) Full hardware management of the charge transfer acquisition sequence
+
+ (#) Programmable charge transfer frequency
+
+ (#) Programmable sampling capacitor I/O pin
+
+ (#) Programmable channel I/O pin
+
+ (#) Programmable max count value to avoid long acquisition when a channel is faulty
+
+ (#) Dedicated end of acquisition and max count error flags with interrupt capability
+
+ (#) One sampling capacitor for up to 3 capacitive sensing channels to reduce the system
+ components
+
+ (#) Compatible with proximity, touchkey, linear and rotary touch sensor implementation
+
+
+ ##### How to use this driver #####
+================================================================================
+ [..]
+ (#) Enable the TSC interface clock using __TSC_CLK_ENABLE() macro.
+
+ (#) GPIO pins configuration
+ (++) Enable the clock for the TSC GPIOs using __GPIOx_CLK_ENABLE() macro.
+ (++) Configure the TSC pins used as sampling IOs in alternate function output Open-Drain mode,
+ and TSC pins used as channel/shield IOs in alternate function output Push-Pull mode
+ using HAL_GPIO_Init() function.
+ (++) Configure the alternate function on all the TSC pins using HAL_xxxx() function.
+
+ (#) Interrupts configuration
+ (++) Configure the NVIC (if the interrupt model is used) using HAL_xxx() function.
+
+ (#) TSC configuration
+ (++) Configure all TSC parameters and used TSC IOs using HAL_TSC_Init() function.
+
+ *** Acquisition sequence ***
+ ===================================
+ [..]
+ (+) Discharge all IOs using HAL_TSC_IODischarge() function.
+ (+) Wait a certain time allowing a good discharge of all capacitors. This delay depends
+ of the sampling capacitor and electrodes design.
+ (+) Select the channel IOs to be acquired using HAL_TSC_IOConfig() function.
+ (+) Launch the acquisition using either HAL_TSC_Start() or HAL_TSC_Start_IT() function.
+ If the synchronized mode is selected, the acquisition will start as soon as the signal
+ is received on the synchro pin.
+ (+) Wait the end of acquisition using either HAL_TSC_PollForAcquisition() or
+ HAL_TSC_GetState() function or using WFI instruction for example.
+ (+) Check the group acquisition status using HAL_TSC_GroupGetStatus() function.
+ (+) Read the acquisition value using HAL_TSC_GroupGetValue() function.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+#ifdef HAL_TSC_MODULE_ENABLED
+
+#if defined(STM32F051x8) || defined(STM32F071xB) || defined(STM32F091xC) || \
+ defined(STM32F042x6) || defined(STM32F072xB) || \
+ defined(STM32F048xx) || defined(STM32F058xx) || defined(STM32F078xx) || defined(STM32F098xx)
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup TSC TSC HAL module driver
+ * @brief TSC HAL module driver
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+static uint32_t TSC_extract_groups(uint32_t iomask);
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup TSC_Exported_Functions TSC Exported Functions
+ * @{
+ */
+
+/** @defgroup TSC_Exported_Functions_Group1 Initialization/de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Initialize and configure the TSC.
+ (+) De-initialize the TSC.
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the TSC peripheral according to the specified parameters
+ * in the TSC_InitTypeDef structure.
+ * @param htsc: TSC handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TSC_Init(TSC_HandleTypeDef* htsc)
+{
+ /* Check TSC handle allocation */
+ if (htsc == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TSC_ALL_INSTANCE(htsc->Instance));
+ assert_param(IS_TSC_CTPH(htsc->Init.CTPulseHighLength));
+ assert_param(IS_TSC_CTPL(htsc->Init.CTPulseLowLength));
+ assert_param(IS_TSC_SS(htsc->Init.SpreadSpectrum));
+ assert_param(IS_TSC_SSD(htsc->Init.SpreadSpectrumDeviation));
+ assert_param(IS_TSC_SS_PRESC(htsc->Init.SpreadSpectrumPrescaler));
+ assert_param(IS_TSC_PG_PRESC(htsc->Init.PulseGeneratorPrescaler));
+ assert_param(IS_TSC_MCV(htsc->Init.MaxCountValue));
+ assert_param(IS_TSC_IODEF(htsc->Init.IODefaultMode));
+ assert_param(IS_TSC_SYNC_POL(htsc->Init.SynchroPinPolarity));
+ assert_param(IS_TSC_ACQ_MODE(htsc->Init.AcquisitionMode));
+ assert_param(IS_TSC_MCE_IT(htsc->Init.MaxCountInterrupt));
+
+ /* Initialize the TSC state */
+ htsc->State = HAL_TSC_STATE_BUSY;
+
+ /* Init the low level hardware : GPIO, CLOCK, CORTEX */
+ HAL_TSC_MspInit(htsc);
+
+ /*--------------------------------------------------------------------------*/
+ /* Set TSC parameters */
+
+ /* Enable TSC */
+ htsc->Instance->CR = TSC_CR_TSCE;
+
+ /* Set all functions */
+ htsc->Instance->CR |= (htsc->Init.CTPulseHighLength |
+ htsc->Init.CTPulseLowLength |
+ (uint32_t)(htsc->Init.SpreadSpectrumDeviation << 17) |
+ htsc->Init.SpreadSpectrumPrescaler |
+ htsc->Init.PulseGeneratorPrescaler |
+ htsc->Init.MaxCountValue |
+ htsc->Init.IODefaultMode |
+ htsc->Init.SynchroPinPolarity |
+ htsc->Init.AcquisitionMode);
+
+ /* Spread spectrum */
+ if (htsc->Init.SpreadSpectrum == ENABLE)
+ {
+ htsc->Instance->CR |= TSC_CR_SSE;
+ }
+
+ /* Disable Schmitt trigger hysteresis on all used TSC IOs */
+ htsc->Instance->IOHCR = (uint32_t)(~(htsc->Init.ChannelIOs | htsc->Init.ShieldIOs | htsc->Init.SamplingIOs));
+
+ /* Set channel and shield IOs */
+ htsc->Instance->IOCCR = (htsc->Init.ChannelIOs | htsc->Init.ShieldIOs);
+
+ /* Set sampling IOs */
+ htsc->Instance->IOSCR = htsc->Init.SamplingIOs;
+
+ /* Set the groups to be acquired */
+ htsc->Instance->IOGCSR = TSC_extract_groups(htsc->Init.ChannelIOs);
+
+ /* Clear interrupts */
+ htsc->Instance->IER &= (uint32_t)(~(TSC_IT_EOA | TSC_IT_MCE));
+
+ /* Clear flags */
+ htsc->Instance->ICR = (TSC_FLAG_EOA | TSC_FLAG_MCE);
+
+ /*--------------------------------------------------------------------------*/
+
+ /* Initialize the TSC state */
+ htsc->State = HAL_TSC_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Deinitializes the TSC peripheral registers to their default reset values.
+ * @param htsc: TSC handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TSC_DeInit(TSC_HandleTypeDef* htsc)
+{
+ /* Check TSC handle allocation */
+ if (htsc == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TSC_ALL_INSTANCE(htsc->Instance));
+
+ /* Change TSC state */
+ htsc->State = HAL_TSC_STATE_BUSY;
+
+ /* DeInit the low level hardware */
+ HAL_TSC_MspDeInit(htsc);
+
+ /* Change TSC state */
+ htsc->State = HAL_TSC_STATE_RESET;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(htsc);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TSC MSP.
+ * @param htsc: pointer to a TSC_HandleTypeDef structure that contains
+ * the configuration information for the specified TSC.
+ * @retval None
+ */
+__weak void HAL_TSC_MspInit(TSC_HandleTypeDef* htsc)
+{
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_TSC_MspInit could be implemented in the user file.
+ */
+}
+
+/**
+ * @brief DeInitializes the TSC MSP.
+ * @param htsc: pointer to a TSC_HandleTypeDef structure that contains
+ * the configuration information for the specified TSC.
+ * @retval None
+ */
+__weak void HAL_TSC_MspDeInit(TSC_HandleTypeDef* htsc)
+{
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_TSC_MspDeInit could be implemented in the user file.
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TSC_Exported_Functions_Group2 IO operation functions
+ * @brief IO operation functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Start acquisition in polling mode.
+ (+) Start acquisition in interrupt mode.
+ (+) Stop conversion in polling mode.
+ (+) Stop conversion in interrupt mode.
+ (+) Get group acquisition status.
+ (+) Get group acquisition value.
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Starts the acquisition.
+ * @param htsc: pointer to a TSC_HandleTypeDef structure that contains
+ * the configuration information for the specified TSC.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TSC_Start(TSC_HandleTypeDef* htsc)
+{
+ /* Check the parameters */
+ assert_param(IS_TSC_ALL_INSTANCE(htsc->Instance));
+
+ /* Process locked */
+ __HAL_LOCK(htsc);
+
+ /* Change TSC state */
+ htsc->State = HAL_TSC_STATE_BUSY;
+
+ /* Clear interrupts */
+ __HAL_TSC_DISABLE_IT(htsc, (TSC_IT_EOA | TSC_IT_MCE));
+
+ /* Clear flags */
+ __HAL_TSC_CLEAR_FLAG(htsc, (TSC_FLAG_EOA | TSC_FLAG_MCE));
+
+ /* Stop discharging the IOs */
+ __HAL_TSC_SET_IODEF_INFLOAT(htsc);
+
+ /* Launch the acquisition */
+ __HAL_TSC_START_ACQ(htsc);
+
+ /* Process unlocked */
+ __HAL_UNLOCK(htsc);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Enables the interrupt and starts the acquisition
+ * @param htsc: pointer to a TSC_HandleTypeDef structure that contains
+ * the configuration information for the specified TSC.
+ * @retval HAL status.
+ */
+HAL_StatusTypeDef HAL_TSC_Start_IT(TSC_HandleTypeDef* htsc)
+{
+ /* Check the parameters */
+ assert_param(IS_TSC_ALL_INSTANCE(htsc->Instance));
+ assert_param(IS_TSC_MCE_IT(htsc->Init.MaxCountInterrupt));
+
+ /* Process locked */
+ __HAL_LOCK(htsc);
+
+ /* Change TSC state */
+ htsc->State = HAL_TSC_STATE_BUSY;
+
+ /* Enable end of acquisition interrupt */
+ __HAL_TSC_ENABLE_IT(htsc, TSC_IT_EOA);
+
+ /* Enable max count error interrupt (optional) */
+ if (htsc->Init.MaxCountInterrupt == ENABLE)
+ {
+ __HAL_TSC_ENABLE_IT(htsc, TSC_IT_MCE);
+ }
+ else
+ {
+ __HAL_TSC_DISABLE_IT(htsc, TSC_IT_MCE);
+ }
+
+ /* Clear flags */
+ __HAL_TSC_CLEAR_FLAG(htsc, (TSC_FLAG_EOA | TSC_FLAG_MCE));
+
+ /* Stop discharging the IOs */
+ __HAL_TSC_SET_IODEF_INFLOAT(htsc);
+
+ /* Launch the acquisition */
+ __HAL_TSC_START_ACQ(htsc);
+
+ /* Process unlocked */
+ __HAL_UNLOCK(htsc);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the acquisition previously launched in polling mode
+ * @param htsc: pointer to a TSC_HandleTypeDef structure that contains
+ * the configuration information for the specified TSC.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TSC_Stop(TSC_HandleTypeDef* htsc)
+{
+ /* Check the parameters */
+ assert_param(IS_TSC_ALL_INSTANCE(htsc->Instance));
+
+ /* Process locked */
+ __HAL_LOCK(htsc);
+
+ /* Stop the acquisition */
+ __HAL_TSC_STOP_ACQ(htsc);
+
+ /* Clear flags */
+ __HAL_TSC_CLEAR_FLAG(htsc, (TSC_FLAG_EOA | TSC_FLAG_MCE));
+
+ /* Change TSC state */
+ htsc->State = HAL_TSC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(htsc);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the acquisition previously launched in interrupt mode
+ * @param htsc: pointer to a TSC_HandleTypeDef structure that contains
+ * the configuration information for the specified TSC.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TSC_Stop_IT(TSC_HandleTypeDef* htsc)
+{
+ /* Check the parameters */
+ assert_param(IS_TSC_ALL_INSTANCE(htsc->Instance));
+
+ /* Process locked */
+ __HAL_LOCK(htsc);
+
+ /* Stop the acquisition */
+ __HAL_TSC_STOP_ACQ(htsc);
+
+ /* Disable interrupts */
+ __HAL_TSC_DISABLE_IT(htsc, (TSC_IT_EOA | TSC_IT_MCE));
+
+ /* Clear flags */
+ __HAL_TSC_CLEAR_FLAG(htsc, (TSC_FLAG_EOA | TSC_FLAG_MCE));
+
+ /* Change TSC state */
+ htsc->State = HAL_TSC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(htsc);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Gets the acquisition status for a group
+ * @param htsc: pointer to a TSC_HandleTypeDef structure that contains
+ * the configuration information for the specified TSC.
+ * @param gx_index: Index of the group
+ * @retval Group status
+ */
+TSC_GroupStatusTypeDef HAL_TSC_GroupGetStatus(TSC_HandleTypeDef* htsc, uint32_t gx_index)
+{
+ /* Check the parameters */
+ assert_param(IS_TSC_ALL_INSTANCE(htsc->Instance));
+ assert_param(IS_GROUP_INDEX(gx_index));
+
+ /* Return the group status */
+ return(__HAL_TSC_GET_GROUP_STATUS(htsc, gx_index));
+}
+
+/**
+ * @brief Gets the acquisition measure for a group
+ * @param htsc: pointer to a TSC_HandleTypeDef structure that contains
+ * the configuration information for the specified TSC.
+ * @param gx_index: Index of the group
+ * @retval Acquisition measure
+ */
+uint32_t HAL_TSC_GroupGetValue(TSC_HandleTypeDef* htsc, uint32_t gx_index)
+{
+ /* Check the parameters */
+ assert_param(IS_TSC_ALL_INSTANCE(htsc->Instance));
+ assert_param(IS_GROUP_INDEX(gx_index));
+
+ /* Return the group acquisition counter */
+ return htsc->Instance->IOGXCR[gx_index];
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TSC_Exported_Functions_Group3 Peripheral Control functions
+ * @brief Peripheral Control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Configure TSC IOs
+ (+) Discharge TSC IOs
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Configures TSC IOs
+ * @param htsc: pointer to a TSC_HandleTypeDef structure that contains
+ * the configuration information for the specified TSC.
+ * @param config: pointer to the configuration structure.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TSC_IOConfig(TSC_HandleTypeDef* htsc, TSC_IOConfigTypeDef* config)
+{
+ /* Check the parameters */
+ assert_param(IS_TSC_ALL_INSTANCE(htsc->Instance));
+
+ /* Process locked */
+ __HAL_LOCK(htsc);
+
+ /* Stop acquisition */
+ __HAL_TSC_STOP_ACQ(htsc);
+
+ /* Disable Schmitt trigger hysteresis on all used TSC IOs */
+ htsc->Instance->IOHCR = (uint32_t)(~(config->ChannelIOs | config->ShieldIOs | config->SamplingIOs));
+
+ /* Set channel and shield IOs */
+ htsc->Instance->IOCCR = (config->ChannelIOs | config->ShieldIOs);
+
+ /* Set sampling IOs */
+ htsc->Instance->IOSCR = config->SamplingIOs;
+
+ /* Set groups to be acquired */
+ htsc->Instance->IOGCSR = TSC_extract_groups(config->ChannelIOs);
+
+ /* Process unlocked */
+ __HAL_UNLOCK(htsc);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Discharge TSC IOs
+ * @param htsc: pointer to a TSC_HandleTypeDef structure that contains
+ * the configuration information for the specified TSC.
+ * @param choice: enable or disable
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TSC_IODischarge(TSC_HandleTypeDef* htsc, uint32_t choice)
+{
+ /* Check the parameters */
+ assert_param(IS_TSC_ALL_INSTANCE(htsc->Instance));
+
+ /* Process locked */
+ __HAL_LOCK(htsc);
+
+ if (choice == ENABLE)
+ {
+ __HAL_TSC_SET_IODEF_OUTPPLOW(htsc);
+ }
+ else
+ {
+ __HAL_TSC_SET_IODEF_INFLOAT(htsc);
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(htsc);
+
+ /* Return the group acquisition counter */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TSC_Exported_Functions_Group4 State functions
+ * @brief State functions
+ *
+@verbatim
+ ===============================================================================
+ ##### State functions #####
+ ===============================================================================
+ [..]
+ This subsection provides functions allowing to
+ (+) Get TSC state.
+ (+) Poll for acquisition completed.
+ (+) Handles TSC interrupt request.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the TSC state
+ * @param htsc: pointer to a TSC_HandleTypeDef structure that contains
+ * the configuration information for the specified TSC.
+ * @retval HAL state
+ */
+HAL_TSC_StateTypeDef HAL_TSC_GetState(TSC_HandleTypeDef* htsc)
+{
+ /* Check the parameters */
+ assert_param(IS_TSC_ALL_INSTANCE(htsc->Instance));
+
+ if (htsc->State == HAL_TSC_STATE_BUSY)
+ {
+ /* Check end of acquisition flag */
+ if (__HAL_TSC_GET_FLAG(htsc, TSC_FLAG_EOA) != RESET)
+ {
+ /* Check max count error flag */
+ if (__HAL_TSC_GET_FLAG(htsc, TSC_FLAG_MCE) != RESET)
+ {
+ /* Change TSC state */
+ htsc->State = HAL_TSC_STATE_ERROR;
+ }
+ else
+ {
+ /* Change TSC state */
+ htsc->State = HAL_TSC_STATE_READY;
+ }
+ }
+ }
+
+ /* Return TSC state */
+ return htsc->State;
+}
+
+/**
+ * @brief Start acquisition and wait until completion
+ * @note There is no need of a timeout parameter as the max count error is already
+ * managed by the TSC peripheral.
+ * @param htsc: pointer to a TSC_HandleTypeDef structure that contains
+ * the configuration information for the specified TSC.
+ * @retval HAL state
+ */
+HAL_StatusTypeDef HAL_TSC_PollForAcquisition(TSC_HandleTypeDef* htsc)
+{
+ /* Check the parameters */
+ assert_param(IS_TSC_ALL_INSTANCE(htsc->Instance));
+
+ /* Process locked */
+ __HAL_LOCK(htsc);
+
+ /* Check end of acquisition */
+ while (HAL_TSC_GetState(htsc) == HAL_TSC_STATE_BUSY)
+ {
+ /* The timeout (max count error) is managed by the TSC peripheral itself. */
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(htsc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Handles TSC interrupt request
+ * @param htsc: pointer to a TSC_HandleTypeDef structure that contains
+ * the configuration information for the specified TSC.
+ * @retval None
+ */
+void HAL_TSC_IRQHandler(TSC_HandleTypeDef* htsc)
+{
+ /* Check the parameters */
+ assert_param(IS_TSC_ALL_INSTANCE(htsc->Instance));
+
+ /* Check if the end of acquisition occured */
+ if (__HAL_TSC_GET_FLAG(htsc, TSC_FLAG_EOA) != RESET)
+ {
+ /* Clear EOA flag */
+ __HAL_TSC_CLEAR_FLAG(htsc, TSC_FLAG_EOA);
+ }
+
+ /* Check if max count error occured */
+ if (__HAL_TSC_GET_FLAG(htsc, TSC_FLAG_MCE) != RESET)
+ {
+ /* Clear MCE flag */
+ __HAL_TSC_CLEAR_FLAG(htsc, TSC_FLAG_MCE);
+ /* Change TSC state */
+ htsc->State = HAL_TSC_STATE_ERROR;
+ /* Conversion completed callback */
+ HAL_TSC_ErrorCallback(htsc);
+ }
+ else
+ {
+ /* Change TSC state */
+ htsc->State = HAL_TSC_STATE_READY;
+ /* Conversion completed callback */
+ HAL_TSC_ConvCpltCallback(htsc);
+ }
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TSC_Exported_Functions_Group5 Callback functions
+ * @brief Callback functions
+ * @{
+ */
+
+/**
+ * @brief Acquisition completed callback in non blocking mode
+ * @param htsc: pointer to a TSC_HandleTypeDef structure that contains
+ * the configuration information for the specified TSC.
+ * @retval None
+ */
+__weak void HAL_TSC_ConvCpltCallback(TSC_HandleTypeDef* htsc)
+{
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_TSC_ConvCpltCallback could be implemented in the user file.
+ */
+}
+
+/**
+ * @brief Error callback in non blocking mode
+ * @param htsc: pointer to a TSC_HandleTypeDef structure that contains
+ * the configuration information for the specified TSC.
+ * @retval None
+ */
+__weak void HAL_TSC_ErrorCallback(TSC_HandleTypeDef* htsc)
+{
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_TSC_ErrorCallback could be implemented in the user file.
+ */
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup TSC_Private_Functions TSC Private Functions
+ * @{
+ */
+
+/**
+ * @brief Utility function used to set the acquired groups mask
+ * @param iomask: Channels IOs mask
+ * @retval Acquired groups mask
+ */
+static uint32_t TSC_extract_groups(uint32_t iomask)
+{
+ uint32_t groups = 0;
+ uint32_t idx;
+
+ for (idx = 0; idx < TSC_NB_OF_GROUPS; idx++)
+ {
+ if ((iomask & ((uint32_t)0x0F << (idx * 4))) != RESET)
+ {
+ groups |= ((uint32_t)1 << idx);
+ }
+ }
+
+ return groups;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined(STM32F051x8) || defined(STM32F071xB) || defined(STM32F091xC) || */
+ /* defined(STM32F042x6) || defined(STM32F072xB) || */
+ /* defined(STM32F048xx) || defined(STM32F058xx) || defined(STM32F078xx) || defined(STM32F098xx) */
+
+#endif /* HAL_TSC_MODULE_ENABLED */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/src/stm32f0xx_hal_uart.c b/f0/src/stm32f0xx_hal_uart.c
new file mode 100755
index 0000000000000000000000000000000000000000..756bb9d46415ae330739cc5c0e22ea0fba276037
--- /dev/null
+++ b/f0/src/stm32f0xx_hal_uart.c
@@ -0,0 +1,1811 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_uart.c
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief UART HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Universal Asynchronous Receiver Transmitter (UART) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral Control functions
+ * + Peripheral State and Errors functions
+ @verbatim
+ ===============================================================================
+ ##### How to use this driver #####
+================================================================================
+ [..]
+ The UART HAL driver can be used as follows:
+
+ (#) Declare a UART_HandleTypeDef handle structure.
+
+ (#) Initialize the UART low level resources by implementing the HAL_UART_MspInit ()API:
+ (##) Enable the USARTx interface clock.
+ (##) UART pins configuration:
+ (+++) Enable the clock for the UART GPIOs.
+ (+++) Configure these UART pins as alternate function pull-up.
+ (##) NVIC configuration if you need to use interrupt process (HAL_UART_Transmit_IT()
+ and HAL_UART_Receive_IT() APIs):
+ (+++) Configure the USARTx interrupt priority.
+ (+++) Enable the NVIC USART IRQ handle.
+ (##) DMA Configuration if you need to use DMA process (HAL_UART_Transmit_DMA()
+ and HAL_UART_Receive_DMA() APIs):
+ (+++) Declare a DMA handle structure for the Tx/Rx channel.
+ (+++) Enable the DMAx interface clock.
+ (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters.
+ (+++) Configure the DMA Tx/Rx channel.
+ (+++) Associate the initilalized DMA handle to the UART DMA Tx/Rx handle.
+ (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx/Rx channel.
+
+ (#) Program the Baud Rate, Word Length , Stop Bit, Parity, Hardware
+ flow control and Mode(Receiver/Transmitter) in the huart Init structure.
+
+ (#) If required, program UART advanced features (TX/RX pins swap, auto Baud rate detection,...)
+ in the huart AdvancedInit structure.
+
+ (#) For the UART asynchronous mode, initialize the UART registers by calling
+ the HAL_UART_Init() API.
+
+ (#) For the UART Half duplex mode, initialize the UART registers by calling
+ the HAL_HalfDuplex_Init() API.
+
+ (#) For the UART Multiprocessor mode, initialize the UART registers
+ by calling the HAL_MultiProcessor_Init() API.
+
+ (#) For the UART RS485 Driver Enabled mode, initialize the UART registers
+ by calling the HAL_RS485Ex_Init() API.
+
+ [..]
+ (@) The specific UART interrupts (Transmission complete interrupt,
+ RXNE interrupt and Error Interrupts) will be managed using the macros
+ __HAL_UART_ENABLE_IT() and __HAL_UART_DISABLE_IT() inside the transmit and receive process.
+
+ [..]
+ (@) These APIs(HAL_UART_Init(), HAL_HalfDuplex_Init(), HAL_MultiProcessor_Init(),
+ also configure also the low level Hardware GPIO, CLOCK, CORTEX...etc) by
+ calling the customed HAL_UART_MspInit() API.
+
+ Three operation modes are available within this driver :
+
+ *** Polling mode IO operation ***
+ =================================
+ [..]
+ (+) Send an amount of data in blocking mode using HAL_UART_Transmit()
+ (+) Receive an amount of data in blocking mode using HAL_UART_Receive()
+
+ *** Interrupt mode IO operation ***
+ ===================================
+ [..]
+ (+) Send an amount of data in non blocking mode using HAL_UART_Transmit_IT()
+ (+) At transmission end of half transfer HAL_UART_TxHalfCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_UART_TxHalfCpltCallback
+ (+) At transmission end of transfer HAL_UART_TxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_UART_TxCpltCallback
+ (+) Receive an amount of data in non blocking mode using HAL_UART_Receive_IT()
+ (+) At reception end of half transfer HAL_UART_RxHalfCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_UART_RxHalfCpltCallback
+ (+) At reception end of transfer HAL_UART_RxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_UART_RxCpltCallback
+ (+) In case of transfer Error, HAL_UART_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_UART_ErrorCallback
+
+ *** DMA mode IO operation ***
+ ==============================
+ [..]
+ (+) Send an amount of data in non blocking mode (DMA) using HAL_UART_Transmit_DMA()
+ (+) At transmission end of half transfer HAL_UART_TxHalfCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_UART_TxHalfCpltCallback
+ (+) At transmission end of transfer HAL_UART_TxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_UART_TxCpltCallback
+ (+) Receive an amount of data in non blocking mode (DMA) using HAL_UART_Receive_DMA()
+ (+) At reception end of half transfer HAL_UART_RxHalfCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_UART_RxHalfCpltCallback
+ (+) At reception end of transfer HAL_UART_RxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_UART_RxCpltCallback
+ (+) In case of transfer Error, HAL_UART_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_UART_ErrorCallback
+ (+) Pause the DMA Transfer using HAL_UART_DMAPause()
+ (+) Resume the DMA Transfer using HAL_UART_DMAResume()
+ (+) Stop the DMA Transfer using HAL_UART_DMAStop()
+
+ *** UART HAL driver macros list ***
+ =============================================
+ [..]
+ Below the list of most used macros in UART HAL driver.
+
+ (+) __HAL_UART_ENABLE: Enable the UART peripheral
+ (+) __HAL_UART_DISABLE: Disable the UART peripheral
+ (+) __HAL_UART_GET_FLAG : Check whether the specified UART flag is set or not
+ (+) __HAL_UART_CLEAR_FLAG : Clear the specified UART pending flag
+ (+) __HAL_UART_ENABLE_IT: Enable the specified UART interrupt
+ (+) __HAL_UART_DISABLE_IT: Disable the specified UART interrupt
+
+ [..]
+ (@) You can refer to the UART HAL driver header file for more useful macros
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup UART UART HAL module driver
+ * @brief HAL UART module driver
+ * @{
+ */
+#ifdef HAL_UART_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup UART_Private_Constants UART Private Constants
+ * @{
+ */
+#define HAL_UART_TXDMA_TIMEOUTVALUE 22000
+#define UART_CR1_FIELDS ((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | \
+ USART_CR1_TE | USART_CR1_RE | USART_CR1_OVER8))
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup UART_Private_Functions UART Private Functions
+ * @{
+ */
+static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma);
+static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma);
+static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma);
+static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma);
+static void UART_DMAError(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup UART_Exported_Functions UART Exported Functions
+ * @{
+ */
+
+/** @defgroup UART_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+===============================================================================
+ ##### Initialization and Configuration functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to initialize the USARTx or the UARTy
+ in asynchronous mode.
+ (+) For the asynchronous mode only these parameters can be configured:
+ (++) Baud Rate
+ (++) Word Length
+ (++) Stop Bit
+ (++) Parity: If the parity is enabled, then the MSB bit of the data written
+ in the data register is transmitted but is changed by the parity bit.
+ Depending on the frame length defined by the M bit (8-bits or 9-bits),
+ the possible UART frame formats are as listed in the following table:
+ |-----------|-----------|---------------------------------------|
+ | M1M0 bits | PCE bit | UART frame |
+ |-----------------------|---------------------------------------|
+ | 00 | 0 | | SB | 8-bit data | STB | |
+ |-----------|-----------|---------------------------------------|
+ | 00 | 1 | | SB | 7-bit data | PB | STB | |
+ |-----------|-----------|---------------------------------------|
+ | 01 | 0 | | SB | 9-bit data | STB | |
+ |-----------|-----------|---------------------------------------|
+ | 01 | 1 | | SB | 8-bit data | PB | STB | |
+ +---------------------------------------------------------------+
+ | 10 | 0 | | SB | 7-bit data | STB | |
+ |-----------|-----------|---------------------------------------|
+ | 10 | 1 | | SB | 6-bit data | PB | STB | |
+ +---------------------------------------------------------------+
+ (++) Hardware flow control
+ (++) Receiver/transmitter modes
+ (++) Over Sampling Method
+ (++) One-Bit Sampling Method
+ (+) For the asynchronous mode, the following advanced features can be configured as well:
+ (++) TX and/or RX pin level inversion
+ (++) data logical level inversion
+ (++) RX and TX pins swap
+ (++) RX overrun detection disabling
+ (++) DMA disabling on RX error
+ (++) MSB first on communication line
+ (++) auto Baud rate detection
+ [..]
+ The HAL_UART_Init(), HAL_HalfDuplex_Init() and HAL_MultiProcessor_Init()
+ API follow respectively the UART asynchronous, UART Half duplex and multiprocessor
+ configuration procedures (details for the procedures are available in reference manual).
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the UART mode according to the specified
+ * parameters in the UART_InitTypeDef and creates the associated handle .
+ * @param huart: uart handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart)
+{
+ /* Check the UART handle allocation */
+ if(huart == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ if(huart->Init.HwFlowCtl != UART_HWCONTROL_NONE)
+ {
+ /* Check the parameters */
+ assert_param(IS_UART_HWFLOW_INSTANCE(huart->Instance));
+ }
+ else
+ {
+ /* Check the parameters */
+ assert_param(IS_UART_INSTANCE(huart->Instance));
+ }
+
+ if(huart->State == HAL_UART_STATE_RESET)
+ {
+ /* Init the low level hardware : GPIO, CLOCK */
+ HAL_UART_MspInit(huart);
+ }
+
+ huart->State = HAL_UART_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_UART_DISABLE(huart);
+
+ /* Set the UART Communication parameters */
+ if (UART_SetConfig(huart) == HAL_ERROR)
+ {
+ return HAL_ERROR;
+ }
+
+ if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT)
+ {
+ UART_AdvFeatureConfig(huart);
+ }
+
+ /* In asynchronous mode, the following bits must be kept cleared:
+ - LINEN and CLKEN bits in the USART_CR2 register,
+ - SCEN, HDSEL and IREN bits in the USART_CR3 register.*/
+ huart->Instance->CR2 &= ~(USART_CR2_LINEN | USART_CR2_CLKEN);
+ huart->Instance->CR3 &= ~(USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN);
+
+ /* Enable the Peripheral */
+ __HAL_UART_ENABLE(huart);
+
+ /* TEACK and/or REACK to check before moving huart->State to Ready */
+ return (UART_CheckIdleState(huart));
+}
+
+/**
+ * @brief Initializes the half-duplex mode according to the specified
+ * parameters in the UART_InitTypeDef and creates the associated handle .
+ * @param huart: uart handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart)
+{
+ /* Check the UART handle allocation */
+ if(huart == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check UART instance */
+ assert_param(IS_UART_HALFDUPLEX_INSTANCE(huart->Instance));
+
+ if(huart->State == HAL_UART_STATE_RESET)
+ {
+ /* Init the low level hardware : GPIO, CLOCK */
+ HAL_UART_MspInit(huart);
+ }
+
+ huart->State = HAL_UART_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_UART_DISABLE(huart);
+
+ /* Set the UART Communication parameters */
+ if (UART_SetConfig(huart) == HAL_ERROR)
+ {
+ return HAL_ERROR;
+ }
+
+ if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT)
+ {
+ UART_AdvFeatureConfig(huart);
+ }
+
+ /* In half-duplex mode, the following bits must be kept cleared:
+ - LINEN and CLKEN bits in the USART_CR2 register,
+ - SCEN and IREN bits in the USART_CR3 register.*/
+ huart->Instance->CR2 &= ~(USART_CR2_LINEN | USART_CR2_CLKEN);
+ huart->Instance->CR3 &= ~(USART_CR3_IREN | USART_CR3_SCEN);
+
+ /* Enable the Half-Duplex mode by setting the HDSEL bit in the CR3 register */
+ huart->Instance->CR3 |= USART_CR3_HDSEL;
+
+ /* Enable the Peripheral */
+ __HAL_UART_ENABLE(huart);
+
+ /* TEACK and/or REACK to check before moving huart->State to Ready */
+ return (UART_CheckIdleState(huart));
+}
+
+
+/**
+ * @brief Initializes the multiprocessor mode according to the specified
+ * parameters in the UART_InitTypeDef and creates the associated handle.
+ * @param huart: UART handle
+ * @param Address: UART node address (4-, 6-, 7- or 8-bit long)
+ * @param WakeUpMethod: specifies the UART wakeup method.
+ * This parameter can be one of the following values:
+ * @arg UART_WAKEUPMETHOD_IDLELINE: WakeUp by an idle line detection
+ * @arg UART_WAKEUPMETHOD_ADDRESSMARK: WakeUp by an address mark
+ * @note If the user resorts to idle line detection wake up, the Address parameter
+ * is useless and ignored by the initialization function.
+ * @note If the user resorts to address mark wake up, the address length detection
+ * is configured by default to 4 bits only. For the UART to be able to
+ * manage 6-, 7- or 8-bit long addresses detection, the API
+ * HAL_MultiProcessorEx_AddressLength_Set() must be called after
+ * HAL_MultiProcessor_Init().
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod)
+{
+ /* Check the UART handle allocation */
+ if(huart == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the wake up method parameter */
+ assert_param(IS_UART_WAKEUPMETHOD(WakeUpMethod));
+
+ if(huart->State == HAL_UART_STATE_RESET)
+ {
+ /* Init the low level hardware : GPIO, CLOCK */
+ HAL_UART_MspInit(huart);
+ }
+
+ huart->State = HAL_UART_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_UART_DISABLE(huart);
+
+ /* Set the UART Communication parameters */
+ if (UART_SetConfig(huart) == HAL_ERROR)
+ {
+ return HAL_ERROR;
+ }
+
+ if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT)
+ {
+ UART_AdvFeatureConfig(huart);
+ }
+
+ /* In multiprocessor mode, the following bits must be kept cleared:
+ - LINEN and CLKEN bits in the USART_CR2 register,
+ - SCEN, HDSEL and IREN bits in the USART_CR3 register. */
+ huart->Instance->CR2 &= ~(USART_CR2_LINEN | USART_CR2_CLKEN);
+ huart->Instance->CR3 &= ~(USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN);
+
+ if (WakeUpMethod == UART_WAKEUPMETHOD_ADDRESSMARK)
+ {
+ /* If address mark wake up method is chosen, set the USART address node */
+ MODIFY_REG(huart->Instance->CR2, USART_CR2_ADD, ((uint32_t)Address << UART_CR2_ADDRESS_LSB_POS));
+ }
+
+ /* Set the wake up method by setting the WAKE bit in the CR1 register */
+ MODIFY_REG(huart->Instance->CR1, USART_CR1_WAKE, WakeUpMethod);
+
+ /* Enable the Peripheral */
+ __HAL_UART_ENABLE(huart);
+
+ /* TEACK and/or REACK to check before moving huart->State to Ready */
+ return (UART_CheckIdleState(huart));
+}
+
+/**
+ * @brief DeInitializes the UART peripheral
+ * @param huart: uart handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart)
+{
+ /* Check the UART handle allocation */
+ if(huart == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_UART_INSTANCE(huart->Instance));
+
+ huart->State = HAL_UART_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_UART_DISABLE(huart);
+
+ huart->Instance->CR1 = 0x0;
+ huart->Instance->CR2 = 0x0;
+ huart->Instance->CR3 = 0x0;
+
+ /* DeInit the low level hardware */
+ HAL_UART_MspDeInit(huart);
+
+ huart->ErrorCode = HAL_UART_ERROR_NONE;
+ huart->State = HAL_UART_STATE_RESET;
+
+ /* Process Unlock */
+ __HAL_UNLOCK(huart);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief UART MSP Init
+ * @param huart: uart handle
+ * @retval None
+ */
+ __weak void HAL_UART_MspInit(UART_HandleTypeDef *huart)
+{
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_UART_MspInit can be implemented in the user file
+ */
+}
+
+/**
+ * @brief UART MSP DeInit
+ * @param huart: uart handle
+ * @retval None
+ */
+ __weak void HAL_UART_MspDeInit(UART_HandleTypeDef *huart)
+{
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_UART_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup UART_Exported_Functions_Group2 IO operation functions
+ * @brief UART Transmit and Receive functions
+ *
+@verbatim
+ ==============================================================================
+ ##### IO operation functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the UART asynchronous
+ and Half duplex data transfers.
+
+ (#) There are two mode of transfer:
+ (++) Blocking mode: The communication is performed in polling mode.
+ The HAL status of all data processing is returned by the same function
+ after finishing transfer.
+ (++) No-Blocking mode: The communication is performed using Interrupts
+ or DMA, These APIs return the HAL status.
+ The end of the data processing will be indicated through the
+ dedicated UART IRQ when using Interrupt mode or the DMA IRQ when
+ using DMA mode.
+ The HAL_UART_TxCpltCallback(), HAL_UART_RxCpltCallback() user callbacks
+ will be executed respectivelly at the end of the transmit or Receive process
+ The HAL_UART_ErrorCallback()user callback will be executed when a communication error is detected
+
+ (#) Blocking mode APIs are :
+ (++) HAL_UART_Transmit()
+ (++) HAL_UART_Receive()
+
+ (#) Non Blocking mode APIs with Interrupt are :
+ (++) HAL_UART_Transmit_IT()
+ (++) HAL_UART_Receive_IT()
+ (++) HAL_UART_IRQHandler()
+ (++) UART_Transmit_IT()
+ (++) UART_Receive_IT()
+
+ (#) Non Blocking mode APIs with DMA are :
+ (++) HAL_UART_Transmit_DMA()
+ (++) HAL_UART_Receive_DMA()
+ (++) HAL_UART_DMAPause()
+ (++) HAL_UART_DMAResume()
+ (++) HAL_UART_DMAStop()
+
+ (#) A set of Transfer Complete Callbacks are provided in non blocking mode:
+ (++) HAL_UART_TxHalfCpltCallback()
+ (++) HAL_UART_TxCpltCallback()
+ (++) HAL_UART_RxHalfCpltCallback()
+ (++) HAL_UART_RxCpltCallback()
+ (++) HAL_UART_ErrorCallback()
+
+ [..]
+ (@) In the Half duplex communication, it is forbidden to run the transmit
+ and receive process in parallel, the UART state HAL_UART_STATE_BUSY_TX_RX can't be useful.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Send an amount of data in blocking mode
+ * @param huart: uart handle
+ * @param pData: pointer to data buffer
+ * @param Size: amount of data to be sent
+ * @param Timeout : Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint16_t* tmp;
+
+ if((huart->State == HAL_UART_STATE_READY) || (huart->State == HAL_UART_STATE_BUSY_RX))
+ {
+ if((pData == NULL ) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ huart->ErrorCode = HAL_UART_ERROR_NONE;
+ /* Check if a non-blocking receive process is ongoing or not */
+ if(huart->State == HAL_UART_STATE_BUSY_RX)
+ {
+ huart->State = HAL_UART_STATE_BUSY_TX_RX;
+ }
+ else
+ {
+ huart->State = HAL_UART_STATE_BUSY_TX;
+ }
+
+ huart->TxXferSize = Size;
+ huart->TxXferCount = Size;
+ while(huart->TxXferCount > 0)
+ {
+ huart->TxXferCount--;
+ if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TXE, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE))
+ {
+ tmp = (uint16_t*) pData;
+ huart->Instance->TDR = (*tmp & (uint16_t)0x01FF);
+ pData += 2;
+ }
+ else
+ {
+ huart->Instance->TDR = (*pData++ & (uint8_t)0xFF);
+ }
+ }
+ if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TC, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ /* Check if a non-blocking receive Process is ongoing or not */
+ if(huart->State == HAL_UART_STATE_BUSY_TX_RX)
+ {
+ huart->State = HAL_UART_STATE_BUSY_RX;
+ }
+ else
+ {
+ huart->State = HAL_UART_STATE_READY;
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data in blocking mode
+ * @param huart: uart handle
+ * @param pData: pointer to data buffer
+ * @param Size: amount of data to be received
+ * @param Timeout : Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint16_t* tmp;
+ uint16_t uhMask;
+
+ if((huart->State == HAL_UART_STATE_READY) || (huart->State == HAL_UART_STATE_BUSY_TX))
+ {
+ if((pData == NULL ) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ huart->ErrorCode = HAL_UART_ERROR_NONE;
+ /* Check if a non-blocking transmit process is ongoing or not */
+ if(huart->State == HAL_UART_STATE_BUSY_TX)
+ {
+ huart->State = HAL_UART_STATE_BUSY_TX_RX;
+ }
+ else
+ {
+ huart->State = HAL_UART_STATE_BUSY_RX;
+ }
+
+ huart->RxXferSize = Size;
+ huart->RxXferCount = Size;
+
+ /* Computation of UART mask to apply to RDR register */
+ __HAL_UART_MASK_COMPUTATION(huart);
+ uhMask = huart->Mask;
+
+ /* as long as data have to be received */
+ while(huart->RxXferCount > 0)
+ {
+ huart->RxXferCount--;
+ if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE))
+ {
+ tmp = (uint16_t*) pData ;
+ *tmp = (uint16_t)(huart->Instance->RDR & uhMask);
+ pData +=2;
+ }
+ else
+ {
+ *pData++ = (uint8_t)(huart->Instance->RDR & (uint8_t)uhMask);
+ }
+ }
+
+ /* Check if a non-blocking transmit Process is ongoing or not */
+ if(huart->State == HAL_UART_STATE_BUSY_TX_RX)
+ {
+ huart->State = HAL_UART_STATE_BUSY_TX;
+ }
+ else
+ {
+ huart->State = HAL_UART_STATE_READY;
+ }
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Send an amount of data in interrupt mode
+ * @param huart: uart handle
+ * @param pData: pointer to data buffer
+ * @param Size: amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
+{
+ if((huart->State == HAL_UART_STATE_READY) || (huart->State == HAL_UART_STATE_BUSY_RX))
+ {
+ if((pData == NULL ) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ huart->pTxBuffPtr = pData;
+ huart->TxXferSize = Size;
+ huart->TxXferCount = Size;
+
+ huart->ErrorCode = HAL_UART_ERROR_NONE;
+ /* Check if a receive process is ongoing or not */
+ if(huart->State == HAL_UART_STATE_BUSY_RX)
+ {
+ huart->State = HAL_UART_STATE_BUSY_TX_RX;
+ }
+ else
+ {
+ huart->State = HAL_UART_STATE_BUSY_TX;
+ }
+
+ /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */
+ __HAL_UART_ENABLE_IT(huart, UART_IT_ERR);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ /* Enable the UART Transmit Data Register Empty Interrupt */
+ __HAL_UART_ENABLE_IT(huart, UART_IT_TXE);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data in interrupt mode
+ * @param huart: uart handle
+ * @param pData: pointer to data buffer
+ * @param Size: amount of data to be received
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
+{
+ if((huart->State == HAL_UART_STATE_READY) || (huart->State == HAL_UART_STATE_BUSY_TX))
+ {
+ if((pData == NULL ) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ huart->pRxBuffPtr = pData;
+ huart->RxXferSize = Size;
+ huart->RxXferCount = Size;
+
+ /* Computation of UART mask to apply to RDR register */
+ __HAL_UART_MASK_COMPUTATION(huart);
+
+ huart->ErrorCode = HAL_UART_ERROR_NONE;
+ /* Check if a transmit process is ongoing or not */
+ if(huart->State == HAL_UART_STATE_BUSY_TX)
+ {
+ huart->State = HAL_UART_STATE_BUSY_TX_RX;
+ }
+ else
+ {
+ huart->State = HAL_UART_STATE_BUSY_RX;
+ }
+
+ /* Enable the UART Parity Error Interrupt */
+ __HAL_UART_ENABLE_IT(huart, UART_IT_PE);
+
+ /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */
+ __HAL_UART_ENABLE_IT(huart, UART_IT_ERR);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ /* Enable the UART Data Register not empty Interrupt */
+ __HAL_UART_ENABLE_IT(huart, UART_IT_RXNE);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Send an amount of data in DMA mode
+ * @param huart: uart handle
+ * @param pData: pointer to data buffer
+ * @param Size: amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
+{
+ uint32_t *tmp;
+
+ if((huart->State == HAL_UART_STATE_READY) || (huart->State == HAL_UART_STATE_BUSY_RX))
+ {
+ if((pData == NULL ) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ huart->pTxBuffPtr = pData;
+ huart->TxXferSize = Size;
+ huart->TxXferCount = Size;
+
+ huart->ErrorCode = HAL_UART_ERROR_NONE;
+ /* Check if a receive process is ongoing or not */
+ if(huart->State == HAL_UART_STATE_BUSY_RX)
+ {
+ huart->State = HAL_UART_STATE_BUSY_TX_RX;
+ }
+ else
+ {
+ huart->State = HAL_UART_STATE_BUSY_TX;
+ }
+
+ /* Set the UART DMA transfer complete callback */
+ huart->hdmatx->XferCpltCallback = UART_DMATransmitCplt;
+
+ /* Set the UART DMA Half transfer complete callback */
+ huart->hdmatx->XferHalfCpltCallback = UART_DMATxHalfCplt;
+
+ /* Set the DMA error callback */
+ huart->hdmatx->XferErrorCallback = UART_DMAError;
+
+ /* Enable the UART transmit DMA channel */
+ tmp = (uint32_t*)&pData;
+ HAL_DMA_Start_IT(huart->hdmatx, *(uint32_t*)tmp, (uint32_t)&huart->Instance->TDR, Size);
+
+ /* Enable the DMA transfer for transmit request by setting the DMAT bit
+ in the UART CR3 register */
+ huart->Instance->CR3 |= USART_CR3_DMAT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data in DMA mode
+ * @param huart: uart handle
+ * @param pData: pointer to data buffer
+ * @param Size: amount of data to be received
+ * @note When the UART parity is enabled (PCE = 1), the received data contain
+ * the parity bit (MSB position)
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
+{
+ uint32_t *tmp;
+
+ if((huart->State == HAL_UART_STATE_READY) || (huart->State == HAL_UART_STATE_BUSY_TX))
+ {
+ if((pData == NULL ) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ huart->pRxBuffPtr = pData;
+ huart->RxXferSize = Size;
+
+ huart->ErrorCode = HAL_UART_ERROR_NONE;
+ /* Check if a transmit process is ongoing or not */
+ if(huart->State == HAL_UART_STATE_BUSY_TX)
+ {
+ huart->State = HAL_UART_STATE_BUSY_TX_RX;
+ }
+ else
+ {
+ huart->State = HAL_UART_STATE_BUSY_RX;
+ }
+
+ /* Set the UART DMA transfer complete callback */
+ huart->hdmarx->XferCpltCallback = UART_DMAReceiveCplt;
+
+ /* Set the UART DMA Half transfer complete callback */
+ huart->hdmarx->XferHalfCpltCallback = UART_DMARxHalfCplt;
+
+ /* Set the DMA error callback */
+ huart->hdmarx->XferErrorCallback = UART_DMAError;
+
+ /* Enable the DMA channel */
+ tmp = (uint32_t*)&pData;
+ HAL_DMA_Start_IT(huart->hdmarx, (uint32_t)&huart->Instance->RDR, *(uint32_t*)tmp, Size);
+
+ /* Enable the DMA transfer for the receiver request by setting the DMAR bit
+ in the UART CR3 register */
+ huart->Instance->CR3 |= USART_CR3_DMAR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Pauses the DMA Transfer.
+ * @param huart: UART handle
+ * @retval None
+ */
+HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart)
+{
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ if(huart->State == HAL_UART_STATE_BUSY_TX)
+ {
+ /* Disable the UART DMA Tx request */
+ huart->Instance->CR3 &= (uint32_t)(~USART_CR3_DMAT);
+ }
+ else if(huart->State == HAL_UART_STATE_BUSY_RX)
+ {
+ /* Disable the UART DMA Rx request */
+ huart->Instance->CR3 &= (uint32_t)(~USART_CR3_DMAR);
+ }
+ else if(huart->State == HAL_UART_STATE_BUSY_TX_RX)
+ {
+ /* Disable the UART DMA Tx request */
+ huart->Instance->CR3 &= (uint32_t)(~USART_CR3_DMAT);
+ /* Disable the UART DMA Rx request */
+ huart->Instance->CR3 &= (uint32_t)(~USART_CR3_DMAR);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Resumes the DMA Transfer.
+ * @param huart: UART handle
+ * @retval None
+ */
+HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart)
+{
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ if(huart->State == HAL_UART_STATE_BUSY_TX)
+ {
+ /* Enable the UART DMA Tx request */
+ huart->Instance->CR3 |= USART_CR3_DMAT;
+ }
+ else if(huart->State == HAL_UART_STATE_BUSY_RX)
+ {
+ /* Enable the UART DMA Rx request */
+ huart->Instance->CR3 |= USART_CR3_DMAR;
+ }
+ else if(huart->State == HAL_UART_STATE_BUSY_TX_RX)
+ {
+ /* Enable the UART DMA Rx request before the DMA Tx request */
+ huart->Instance->CR3 |= USART_CR3_DMAR;
+ /* Enable the UART DMA Tx request */
+ huart->Instance->CR3 |= USART_CR3_DMAT;
+ }
+
+ /* If the UART peripheral is still not enabled, enable it */
+ if ((huart->Instance->CR1 & USART_CR1_UE) == 0)
+ {
+ /* Enable UART peripheral */
+ __HAL_UART_ENABLE(huart);
+ }
+
+ /* TEACK and/or REACK to check before moving huart->State to Ready */
+ return (UART_CheckIdleState(huart));
+}
+
+/**
+ * @brief Stops the DMA Transfer.
+ * @param huart: UART handle
+ * @retval None
+ */
+HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart)
+{
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ /* Disable the UART Tx/Rx DMA requests */
+ huart->Instance->CR3 &= ~USART_CR3_DMAT;
+ huart->Instance->CR3 &= ~USART_CR3_DMAR;
+
+ /* Abort the UART DMA tx channel */
+ if(huart->hdmatx != NULL)
+ {
+ HAL_DMA_Abort(huart->hdmatx);
+ }
+ /* Abort the UART DMA rx channel */
+ if(huart->hdmarx != NULL)
+ {
+ HAL_DMA_Abort(huart->hdmarx);
+ }
+
+ /* Disable UART peripheral */
+ __HAL_UART_DISABLE(huart);
+
+ huart->State = HAL_UART_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Tx Transfer completed callbacks
+ * @param huart: uart handle
+ * @retval None
+ */
+ __weak void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart)
+{
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_UART_TxCpltCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief Tx Half Transfer completed callbacks.
+ * @param huart: UART handle
+ * @retval None
+ */
+ __weak void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart)
+{
+ /* NOTE: This function should not be modified, when the callback is needed,
+ the HAL_UART_TxHalfCpltCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Transfer completed callbacks
+ * @param huart: uart handle
+ * @retval None
+ */
+__weak void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart)
+{
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_UART_RxCpltCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Half Transfer completed callbacks.
+ * @param huart: UART handle
+ * @retval None
+ */
+__weak void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart)
+{
+ /* NOTE: This function should not be modified, when the callback is needed,
+ the HAL_UART_RxHalfCpltCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief UART error callbacks
+ * @param huart: uart handle
+ * @retval None
+ */
+ __weak void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart)
+{
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_UART_ErrorCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup UART_Exported_Functions_Group3 Peripheral Control functions
+ * @brief UART control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the UART.
+ (+) HAL_UART_GetState() API is helpful to check in run-time the state of the UART peripheral.
+ (+) HAL_MultiProcessor_EnableMuteMode() API enables mute mode
+ (+) HAL_MultiProcessor_DisableMuteMode() API disables mute mode
+ (+) HAL_MultiProcessor_EnterMuteMode() API enters mute mode
+ (+) HAL_MultiProcessor_EnableMuteMode() API enables mute mode
+ (+) HAL_UART_EnableStopMode() API enables the UART to wake up the MCU from stop mode
+ (+) HAL_UART_DisableStopMode() API disables the above functionality
+ (+) UART_SetConfig() API configures the UART peripheral
+ (+) UART_AdvFeatureConfig() API optionally configures the UART advanced features
+ (+) UART_CheckIdleState() API ensures that TEACK and/or REACK are set after initialization
+ (+) UART_Wakeup_AddressConfig() API configures the wake-up from stop mode parameters
+ (+) HAL_HalfDuplex_EnableTransmitter() API disables receiver and enables transmitter
+ (+) HAL_HalfDuplex_EnableReceiver() API disables transmitter and enables receiver
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Enable UART in mute mode (doesn't mean UART enters mute mode;
+ * to enter mute mode, HAL_MultiProcessor_EnterMuteMode() API must be called)
+ * @param huart: UART handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_MultiProcessor_EnableMuteMode(UART_HandleTypeDef *huart)
+{
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ huart->State = HAL_UART_STATE_BUSY;
+
+ /* Enable USART mute mode by setting the MME bit in the CR1 register */
+ huart->Instance->CR1 |= USART_CR1_MME;
+
+ huart->State = HAL_UART_STATE_READY;
+
+ return (UART_CheckIdleState(huart));
+}
+
+/**
+ * @brief Disable UART mute mode (doesn't mean it actually wakes up the software,
+ * as it may not have been in mute mode at this very moment).
+ * @param huart: uart handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_MultiProcessor_DisableMuteMode(UART_HandleTypeDef *huart)
+{
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ huart->State = HAL_UART_STATE_BUSY;
+
+ /* Disable USART mute mode by clearing the MME bit in the CR1 register */
+ huart->Instance->CR1 &= ~(USART_CR1_MME);
+
+ huart->State = HAL_UART_STATE_READY;
+
+ return (UART_CheckIdleState(huart));
+}
+
+/**
+ * @brief Enter UART mute mode (means UART actually enters mute mode).
+ * To exit from mute mode, HAL_MultiProcessor_DisableMuteMode() API must be called.
+ * @param huart: uart handle
+ * @retval HAL status
+ */
+void HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart)
+{
+ __HAL_UART_SEND_REQ(huart, UART_MUTE_MODE_REQUEST);
+}
+
+/**
+ * @brief Enables the UART transmitter and disables the UART receiver.
+ * @param huart: UART handle
+ * @retval HAL status
+ * @retval None
+ */
+HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart)
+{
+ /* Process Locked */
+ __HAL_LOCK(huart);
+ huart->State = HAL_UART_STATE_BUSY;
+
+ /* Clear TE and RE bits */
+ CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TE | USART_CR1_RE));
+ /* Enable the USART's transmit interface by setting the TE bit in the USART CR1 register */
+ SET_BIT(huart->Instance->CR1, USART_CR1_TE);
+
+ huart->State = HAL_UART_STATE_READY;
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enables the UART receiver and disables the UART transmitter.
+ * @param huart: UART handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart)
+{
+ /* Process Locked */
+ __HAL_LOCK(huart);
+ huart->State = HAL_UART_STATE_BUSY;
+
+ /* Clear TE and RE bits */
+ CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TE | USART_CR1_RE));
+ /* Enable the USART's receive interface by setting the RE bit in the USART CR1 register */
+ SET_BIT(huart->Instance->CR1, USART_CR1_RE);
+
+ huart->State = HAL_UART_STATE_READY;
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup UART_Exported_Functions_Group4 Peripheral State and Errors functions
+ * @{
+ */
+
+/**
+ * @brief return the UART state
+ * @param huart: uart handle
+ * @retval HAL state
+ */
+HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart)
+{
+ return huart->State;
+}
+
+/**
+* @brief Return the UART error code
+* @param huart : pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART.
+* @retval UART Error Code
+*/
+uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart)
+{
+ return huart->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup UART_Private_Functions UART Private Functions
+ * @{
+ */
+
+/**
+ * @brief Send an amount of data in interrupt mode
+ * Function called under interruption only, once
+ * interruptions have been enabled by HAL_UART_Transmit_IT()
+ * @param huart: UART handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef UART_Transmit_IT(UART_HandleTypeDef *huart)
+{
+ uint16_t* tmp;
+
+ if ((huart->State == HAL_UART_STATE_BUSY_TX) || (huart->State == HAL_UART_STATE_BUSY_TX_RX))
+ {
+
+ if(huart->TxXferCount == 0)
+ {
+ /* Disable the UART Transmit Data Register Empty Interrupt */
+ __HAL_UART_DISABLE_IT(huart, UART_IT_TXE);
+
+ /* Enable the UART Transmit Complete Interrupt */
+ __HAL_UART_ENABLE_IT(huart, UART_IT_TC);
+
+ return HAL_OK;
+ }
+ else
+ {
+ if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE))
+ {
+ tmp = (uint16_t*) huart->pTxBuffPtr;
+ huart->Instance->TDR = (*tmp & (uint16_t)0x01FF);
+ huart->pTxBuffPtr += 2;
+ }
+ else
+ {
+ huart->Instance->TDR = (uint8_t)(*huart->pTxBuffPtr++ & (uint8_t)0xFF);
+ }
+
+ huart->TxXferCount--;
+
+ return HAL_OK;
+ }
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data in interrupt mode
+ * Function called under interruption only, once
+ * interruptions have been enabled by HAL_UART_Receive_IT()
+ * @param huart: UART handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef UART_Receive_IT(UART_HandleTypeDef *huart)
+{
+ uint16_t* tmp;
+ uint16_t uhMask = huart->Mask;
+
+ if((huart->State == HAL_UART_STATE_BUSY_RX) || (huart->State == HAL_UART_STATE_BUSY_TX_RX))
+ {
+
+ if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE))
+ {
+ tmp = (uint16_t*) huart->pRxBuffPtr ;
+ *tmp = (uint16_t)(huart->Instance->RDR & uhMask);
+ huart->pRxBuffPtr +=2;
+ }
+ else
+ {
+ *huart->pRxBuffPtr++ = (uint8_t)(huart->Instance->RDR & (uint8_t)uhMask);
+ }
+
+ if(--huart->RxXferCount == 0)
+ {
+ __HAL_UART_DISABLE_IT(huart, UART_IT_RXNE);
+
+ /* Check if a transmit Process is ongoing or not */
+ if(huart->State == HAL_UART_STATE_BUSY_TX_RX)
+ {
+ huart->State = HAL_UART_STATE_BUSY_TX;
+ }
+ else
+ {
+ /* Disable the UART Parity Error Interrupt */
+ __HAL_UART_DISABLE_IT(huart, UART_IT_PE);
+
+ /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */
+ __HAL_UART_DISABLE_IT(huart, UART_IT_ERR);
+
+ huart->State = HAL_UART_STATE_READY;
+ }
+
+ HAL_UART_RxCpltCallback(huart);
+
+ return HAL_OK;
+ }
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Check the UART Idle State
+ * @param huart: uart handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart)
+{
+ /* Initialize the UART ErrorCode */
+ huart->ErrorCode = HAL_UART_ERROR_NONE;
+
+ /* Check if the Transmitter is enabled */
+ if((huart->Instance->CR1 & USART_CR1_TE) == USART_CR1_TE)
+ {
+ /* Wait until TEACK flag is set */
+ if(UART_WaitOnFlagUntilTimeout(huart, USART_ISR_TEACK, RESET, HAL_UART_TIMEOUT_VALUE) != HAL_OK)
+ {
+ /* Timeout Occured */
+ return HAL_TIMEOUT;
+ }
+ }
+ /* Check if the Receiver is enabled */
+ if((huart->Instance->CR1 & USART_CR1_RE) == USART_CR1_RE)
+ {
+ /* Wait until REACK flag is set */
+ if(UART_WaitOnFlagUntilTimeout(huart, USART_ISR_REACK, RESET, HAL_UART_TIMEOUT_VALUE) != HAL_OK)
+ {
+ /* Timeout Occured */
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Initialize the UART State */
+ huart->State= HAL_UART_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles UART Communication Timeout.
+ * @param huart: UART handle
+ * @param Flag: specifies the UART flag to check.
+ * @param Status: The new Flag status (SET or RESET).
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, uint32_t Timeout)
+{
+ uint32_t tickstart = HAL_GetTick();
+
+ /* Wait until flag is set */
+ if(Status == RESET)
+ {
+ while(__HAL_UART_GET_FLAG(huart, Flag) == RESET)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0) || ((HAL_GetTick() - tickstart) > Timeout))
+ {
+ /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
+ __HAL_UART_DISABLE_IT(huart, UART_IT_TXE);
+ __HAL_UART_DISABLE_IT(huart, UART_IT_RXNE);
+ __HAL_UART_DISABLE_IT(huart, UART_IT_PE);
+ __HAL_UART_DISABLE_IT(huart, UART_IT_ERR);
+
+ huart->State = HAL_UART_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ else
+ {
+ while(__HAL_UART_GET_FLAG(huart, Flag) != RESET)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0) || ((HAL_GetTick() - tickstart) > Timeout))
+ {
+ /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
+ __HAL_UART_DISABLE_IT(huart, UART_IT_TXE);
+ __HAL_UART_DISABLE_IT(huart, UART_IT_RXNE);
+ __HAL_UART_DISABLE_IT(huart, UART_IT_PE);
+ __HAL_UART_DISABLE_IT(huart, UART_IT_ERR);
+
+ huart->State = HAL_UART_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief DMA UART transmit process complete callback
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma)
+{
+ UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ huart->TxXferCount = 0;
+
+ /* Disable the DMA transfer for transmit request by setting the DMAT bit
+ in the UART CR3 register */
+ huart->Instance->CR3 &= (uint32_t)~((uint32_t)USART_CR3_DMAT);
+
+ /* Wait for UART TC Flag */
+ if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TC, RESET, HAL_UART_TXDMA_TIMEOUTVALUE) != HAL_OK)
+ {
+ /* Timeout Occured */
+ huart->State = HAL_UART_STATE_TIMEOUT;
+ HAL_UART_ErrorCallback(huart);
+ }
+ else
+ {
+ /* No Timeout */
+ /* Check if a receive process is ongoing or not */
+ if(huart->State == HAL_UART_STATE_BUSY_TX_RX)
+ {
+ huart->State = HAL_UART_STATE_BUSY_RX;
+ }
+ else
+ {
+ huart->State = HAL_UART_STATE_READY;
+ }
+ HAL_UART_TxCpltCallback(huart);
+ }
+}
+
+/**
+ * @brief DMA UART transmit process half complete callback
+ * @param hdma : DMA handle
+ * @retval None
+ */
+static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+ UART_HandleTypeDef* huart = (UART_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ HAL_UART_TxHalfCpltCallback(huart);
+}
+
+/**
+ * @brief DMA UART receive process complete callback
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+ UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ huart->RxXferCount = 0;
+
+ /* Disable the DMA transfer for the receiver request by setting the DMAR bit
+ in the UART CR3 register */
+ huart->Instance->CR3 &= (uint32_t)~((uint32_t)USART_CR3_DMAR);
+
+ /* Check if a transmit Process is ongoing or not */
+ if(huart->State == HAL_UART_STATE_BUSY_TX_RX)
+ {
+ huart->State = HAL_UART_STATE_BUSY_TX;
+ }
+ else
+ {
+ huart->State = HAL_UART_STATE_READY;
+ }
+ HAL_UART_RxCpltCallback(huart);
+}
+
+/**
+ * @brief DMA UART receive process half complete callback
+ * @param hdma : DMA handle
+ * @retval None
+ */
+static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+ UART_HandleTypeDef* huart = (UART_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ HAL_UART_RxHalfCpltCallback(huart);
+}
+
+/**
+ * @brief DMA UART communication error callback
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void UART_DMAError(DMA_HandleTypeDef *hdma)
+{
+ UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ huart->RxXferCount = 0;
+ huart->TxXferCount = 0;
+ huart->State= HAL_UART_STATE_READY;
+ huart->ErrorCode |= HAL_UART_ERROR_DMA;
+ HAL_UART_ErrorCallback(huart);
+}
+
+/**
+ * @brief Configure the UART peripheral
+ * @param huart: uart handle
+ * @retval None
+ */
+HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart)
+{
+ uint32_t tmpreg = 0x00000000;
+ UART_ClockSourceTypeDef clocksource = UART_CLOCKSOURCE_UNDEFINED;
+ uint16_t brrtemp = 0x0000;
+ uint16_t usartdiv = 0x0000;
+ HAL_StatusTypeDef ret = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_UART_BAUDRATE(huart->Init.BaudRate));
+ assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength));
+ assert_param(IS_UART_STOPBITS(huart->Init.StopBits));
+ assert_param(IS_UART_PARITY(huart->Init.Parity));
+ assert_param(IS_UART_MODE(huart->Init.Mode));
+ assert_param(IS_UART_HARDWARE_FLOW_CONTROL(huart->Init.HwFlowCtl));
+ assert_param(IS_UART_ONEBIT_SAMPLING(huart->Init.OneBitSampling));
+
+
+ /*-------------------------- USART CR1 Configuration -----------------------*/
+ /* Clear M, PCE, PS, TE, RE and OVER8 bits and configure
+ * the UART Word Length, Parity, Mode and oversampling:
+ * set the M bits according to huart->Init.WordLength value
+ * set PCE and PS bits according to huart->Init.Parity value
+ * set TE and RE bits according to huart->Init.Mode value
+ * set OVER8 bit according to huart->Init.OverSampling value */
+ tmpreg = (uint32_t)huart->Init.WordLength | huart->Init.Parity | huart->Init.Mode | huart->Init.OverSampling ;
+ MODIFY_REG(huart->Instance->CR1, UART_CR1_FIELDS, tmpreg);
+
+ /*-------------------------- USART CR2 Configuration -----------------------*/
+ /* Configure the UART Stop Bits: Set STOP[13:12] bits according
+ * to huart->Init.StopBits value */
+ MODIFY_REG(huart->Instance->CR2, USART_CR2_STOP, huart->Init.StopBits);
+
+ /*-------------------------- USART CR3 Configuration -----------------------*/
+ /* Configure
+ * - UART HardWare Flow Control: set CTSE and RTSE bits according
+ * to huart->Init.HwFlowCtl value
+ * - one-bit sampling method versus three samples' majority rule according
+ * to huart->Init.OneBitSampling */
+ tmpreg = (uint32_t)huart->Init.HwFlowCtl | huart->Init.OneBitSampling ;
+ MODIFY_REG(huart->Instance->CR3, (USART_CR3_RTSE | USART_CR3_CTSE | USART_CR3_ONEBIT), tmpreg);
+
+ /*-------------------------- USART BRR Configuration -----------------------*/
+ __HAL_UART_GETCLOCKSOURCE(huart, clocksource);
+
+ /* Check the Over Sampling to set Baud Rate Register */
+ if (huart->Init.OverSampling == UART_OVERSAMPLING_8)
+ {
+ switch (clocksource)
+ {
+ case UART_CLOCKSOURCE_PCLK1:
+ usartdiv = (uint16_t)(__DIV_SAMPLING8(HAL_RCC_GetPCLK1Freq(), huart->Init.BaudRate));
+ break;
+ case UART_CLOCKSOURCE_HSI:
+ usartdiv = (uint16_t)(__DIV_SAMPLING8(HSI_VALUE, huart->Init.BaudRate));
+ break;
+ case UART_CLOCKSOURCE_SYSCLK:
+ usartdiv = (uint16_t)(__DIV_SAMPLING8(HAL_RCC_GetSysClockFreq(), huart->Init.BaudRate));
+ break;
+ case UART_CLOCKSOURCE_LSE:
+ usartdiv = (uint16_t)(__DIV_SAMPLING8(LSE_VALUE, huart->Init.BaudRate));
+ break;
+ case UART_CLOCKSOURCE_UNDEFINED:
+ default:
+ ret = HAL_ERROR;
+ break;
+ }
+
+ brrtemp = usartdiv & 0xFFF0;
+ brrtemp |= (uint16_t) ((usartdiv & (uint16_t)0x000F) >> 1U);
+ huart->Instance->BRR = brrtemp;
+ }
+ else
+ {
+ switch (clocksource)
+ {
+ case UART_CLOCKSOURCE_PCLK1:
+ huart->Instance->BRR = (uint16_t)(__DIV_SAMPLING16(HAL_RCC_GetPCLK1Freq(), huart->Init.BaudRate));
+ break;
+ case UART_CLOCKSOURCE_HSI:
+ huart->Instance->BRR = (uint16_t)(__DIV_SAMPLING16(HSI_VALUE, huart->Init.BaudRate));
+ break;
+ case UART_CLOCKSOURCE_SYSCLK:
+ huart->Instance->BRR = (uint16_t)(__DIV_SAMPLING16(HAL_RCC_GetSysClockFreq(), huart->Init.BaudRate));
+ break;
+ case UART_CLOCKSOURCE_LSE:
+ huart->Instance->BRR = (uint16_t)(__DIV_SAMPLING16(LSE_VALUE, huart->Init.BaudRate));
+ break;
+ case UART_CLOCKSOURCE_UNDEFINED:
+ default:
+ ret = HAL_ERROR;
+ break;
+ }
+ }
+
+ return ret;
+
+}
+
+/**
+ * @brief Configure the UART peripheral advanced feautures
+ * @param huart: uart handle
+ * @retval None
+ */
+void UART_AdvFeatureConfig(UART_HandleTypeDef *huart)
+{
+ /* Check whether the set of advanced features to configure is properly set */
+ assert_param(IS_UART_ADVFEATURE_INIT(huart->AdvancedInit.AdvFeatureInit));
+
+ /* if required, configure TX pin active level inversion */
+ if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_TXINVERT_INIT))
+ {
+ assert_param(IS_UART_ADVFEATURE_TXINV(huart->AdvancedInit.TxPinLevelInvert));
+ MODIFY_REG(huart->Instance->CR2, USART_CR2_TXINV, huart->AdvancedInit.TxPinLevelInvert);
+ }
+
+ /* if required, configure RX pin active level inversion */
+ if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_RXINVERT_INIT))
+ {
+ assert_param(IS_UART_ADVFEATURE_RXINV(huart->AdvancedInit.RxPinLevelInvert));
+ MODIFY_REG(huart->Instance->CR2, USART_CR2_RXINV, huart->AdvancedInit.RxPinLevelInvert);
+ }
+
+ /* if required, configure data inversion */
+ if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_DATAINVERT_INIT))
+ {
+ assert_param(IS_UART_ADVFEATURE_DATAINV(huart->AdvancedInit.DataInvert));
+ MODIFY_REG(huart->Instance->CR2, USART_CR2_DATAINV, huart->AdvancedInit.DataInvert);
+ }
+
+ /* if required, configure RX/TX pins swap */
+ if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_SWAP_INIT))
+ {
+ assert_param(IS_UART_ADVFEATURE_SWAP(huart->AdvancedInit.Swap));
+ MODIFY_REG(huart->Instance->CR2, USART_CR2_SWAP, huart->AdvancedInit.Swap);
+ }
+
+ /* if required, configure RX overrun detection disabling */
+ if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_RXOVERRUNDISABLE_INIT))
+ {
+ assert_param(IS_UART_OVERRUN(huart->AdvancedInit.OverrunDisable));
+ MODIFY_REG(huart->Instance->CR3, USART_CR3_OVRDIS, huart->AdvancedInit.OverrunDisable);
+ }
+
+ /* if required, configure DMA disabling on reception error */
+ if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_DMADISABLEONERROR_INIT))
+ {
+ assert_param(IS_UART_ADVFEATURE_DMAONRXERROR(huart->AdvancedInit.DMADisableonRxError));
+ MODIFY_REG(huart->Instance->CR3, USART_CR3_DDRE, huart->AdvancedInit.DMADisableonRxError);
+ }
+
+ /* if required, configure auto Baud rate detection scheme */
+ if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_AUTOBAUDRATE_INIT))
+ {
+ assert_param(IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(huart->Instance));
+ assert_param(IS_UART_ADVFEATURE_AUTOBAUDRATE(huart->AdvancedInit.AutoBaudRateEnable));
+ MODIFY_REG(huart->Instance->CR2, USART_CR2_ABREN, huart->AdvancedInit.AutoBaudRateEnable);
+ /* set auto Baudrate detection parameters if detection is enabled */
+ if (huart->AdvancedInit.AutoBaudRateEnable == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE)
+ {
+ assert_param(IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(huart->AdvancedInit.AutoBaudRateMode));
+ MODIFY_REG(huart->Instance->CR2, USART_CR2_ABRMODE, huart->AdvancedInit.AutoBaudRateMode);
+ }
+ }
+
+ /* if required, configure MSB first on communication line */
+ if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_MSBFIRST_INIT))
+ {
+ assert_param(IS_UART_ADVFEATURE_MSBFIRST(huart->AdvancedInit.MSBFirst));
+ MODIFY_REG(huart->Instance->CR2, USART_CR2_MSBFIRST, huart->AdvancedInit.MSBFirst);
+ }
+}
+
+/**
+ * @}
+ */
+
+#endif /* HAL_UART_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/src/stm32f0xx_hal_uart_ex.c b/f0/src/stm32f0xx_hal_uart_ex.c
new file mode 100755
index 0000000000000000000000000000000000000000..4cd91969fbbd3bfb53bd3f36e87eb136dd8d3d7b
--- /dev/null
+++ b/f0/src/stm32f0xx_hal_uart_ex.c
@@ -0,0 +1,706 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_uart_ex.c
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief Extended UART HAL module driver.
+ *
+ * This file provides firmware functions to manage the following extended
+ * functionalities of the Universal Asynchronous Receiver Transmitter Peripheral (UART).
+ * + Initialization and de-initialization functions
+ * + Peripheral Control functions
+ *
+ *
+ @verbatim
+ ===============================================================================
+ ##### How to use this driver #####
+ ===============================================================================
+ [..]
+ The Extended UART HAL driver can be used as follows:
+
+ (#) Declare a UART_HandleTypeDef handle structure.
+
+ (#) For the UART RS485 Driver Enabled mode, initialize the UART registers
+ by calling the HAL_RS485Ex_Init() API.
+
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup UARTEx UARTEx Extended HAL module driver
+ * @brief UART Extended HAL module driver
+ * @{
+ */
+
+#ifdef HAL_UART_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+
+/** @defgroup UARTEx_Private_Functions UARTEx Private Functions
+ * @{
+ */
+#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC)
+static void UART_Wakeup_AddressConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection);
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) */
+static HAL_StatusTypeDef UART_EndTransmit_IT(UART_HandleTypeDef *huart);
+
+/**
+ * @}
+ */
+
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup UARTEx_Exported_Functions UARTEx Exported Functions
+ * @{
+ */
+
+/** @defgroup UARTEx_Exported_Functions_Group1 Extended Initialization/de-initialization functions
+ * @brief Extended Initialization and Configuration Functions
+ *
+@verbatim
+===============================================================================
+ ##### Initialization and Configuration functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to initialize the USARTx or the UARTy
+ in asynchronous mode.
+ (+) For the asynchronous mode only these parameters can be configured:
+ (++) Baud Rate
+ (++) Word Length (Fixed to 8-bits only for LIN mode)
+ (++) Stop Bit
+ (++) Parity: If the parity is enabled, then the MSB bit of the data written
+ in the data register is transmitted but is changed by the parity bit.
+ Depending on the frame length defined by the M bit (8-bits or 9-bits),
+ the possible UART frame formats are as listed in the following table:
+ |-----------|-----------|---------------------------------------|
+ | M1M0 bits | PCE bit | UART frame |
+ |-----------------------|---------------------------------------|
+ | 00 | 0 | | SB | 8-bit data | STB | |
+ |-----------|-----------|---------------------------------------|
+ | 00 | 1 | | SB | 7-bit data | PB | STB | |
+ |-----------|-----------|---------------------------------------|
+ | 01 | 0 | | SB | 9-bit data | STB | |
+ |-----------|-----------|---------------------------------------|
+ | 01 | 1 | | SB | 8-bit data | PB | STB | |
+ +---------------------------------------------------------------+
+ | 10 | 0 | | SB | 7-bit data | STB | |
+ |-----------|-----------|---------------------------------------|
+ | 10 | 1 | | SB | 6-bit data | PB | STB | |
+ +---------------------------------------------------------------+
+ (++) Hardware flow control
+ (++) Receiver/transmitter modes
+ (++) Over Sampling Method
+ (++) One-Bit Sampling Method
+ (+) For the asynchronous mode, the following advanced features can be configured as well:
+ (++) TX and/or RX pin level inversion
+ (++) data logical level inversion
+ (++) RX and TX pins swap
+ (++) RX overrun detection disabling
+ (++) DMA disabling on RX error
+ (++) MSB first on communication line
+ (++) auto Baud rate detection
+ [..]
+ The HAL_LIN_Init() and HAL_RS485Ex_Init() APIs follows respectively the LIN and
+ the UART RS485 mode configuration procedures (details for the procedures are
+ available in reference manual).
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the RS485 Driver enable feature according to the specified
+ * parameters in the UART_InitTypeDef and creates the associated handle .
+ * @param huart: uart handle
+ * @param UART_DEPolarity: select the driver enable polarity
+ * This parameter can be one of the following values:
+ * @arg UART_DE_POLARITY_HIGH: DE signal is active high
+ * @arg UART_DE_POLARITY_LOW: DE signal is active low
+ * @param UART_DEAssertionTime: Driver Enable assertion time
+ * 5-bit value defining the time between the activation of the DE (Driver Enable)
+ * signal and the beginning of the start bit. It is expressed in sample time
+ * units (1/8 or 1/16 bit time, depending on the oversampling rate)
+ * @param UART_DEDeassertionTime: Driver Enable deassertion time
+ * 5-bit value defining the time between the end of the last stop bit, in a
+ * transmitted message, and the de-activation of the DE (Driver Enable) signal.
+ * It is expressed in sample time units (1/8 or 1/16 bit time, depending on the
+ * oversampling rate).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t UART_DEPolarity, uint32_t UART_DEAssertionTime, uint32_t UART_DEDeassertionTime)
+{
+ uint32_t temp = 0x0;
+
+ /* Check the UART handle allocation */
+ if(huart == NULL)
+ {
+ return HAL_ERROR;
+ }
+ /* Check the Driver Enable UART instance */
+ assert_param(IS_UART_DRIVER_ENABLE_INSTANCE(huart->Instance));
+
+ /* Check the Driver Enable polarity */
+ assert_param(IS_UART_DE_POLARITY(UART_DEPolarity));
+
+ /* Check the Driver Enable assertion time */
+ assert_param(IS_UART_ASSERTIONTIME(UART_DEAssertionTime));
+
+ /* Check the Driver Enable deassertion time */
+ assert_param(IS_UART_DEASSERTIONTIME(UART_DEDeassertionTime));
+
+ if(huart->State == HAL_UART_STATE_RESET)
+ {
+ /* Init the low level hardware : GPIO, CLOCK */
+ HAL_UART_MspInit(huart);
+ }
+
+ huart->State = HAL_UART_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_UART_DISABLE(huart);
+
+ /* Set the UART Communication parameters */
+ if (UART_SetConfig(huart) == HAL_ERROR)
+ {
+ return HAL_ERROR;
+ }
+
+ if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT)
+ {
+ UART_AdvFeatureConfig(huart);
+ }
+
+ /* Enable the Driver Enable mode by setting the DEM bit in the CR3 register */
+ huart->Instance->CR3 |= USART_CR3_DEM;
+
+ /* Set the Driver Enable polarity */
+ MODIFY_REG(huart->Instance->CR3, USART_CR3_DEP, UART_DEPolarity);
+
+ /* Set the Driver Enable assertion and deassertion times */
+ temp = (UART_DEAssertionTime << UART_CR1_DEAT_ADDRESS_LSB_POS);
+ temp |= (UART_DEDeassertionTime << UART_CR1_DEDT_ADDRESS_LSB_POS);
+ MODIFY_REG(huart->Instance->CR1, (USART_CR1_DEDT|USART_CR1_DEAT), temp);
+
+ /* Enable the Peripheral */
+ __HAL_UART_ENABLE(huart);
+
+ /* TEACK and/or REACK to check before moving huart->State to Ready */
+ return (UART_CheckIdleState(huart));
+}
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC)
+/**
+ * @brief Initializes the LIN mode according to the specified
+ * parameters in the UART_InitTypeDef and creates the associated handle.
+ * @param huart: uart handle
+ * @param BreakDetectLength: specifies the LIN break detection length.
+ * This parameter can be one of the following values:
+ * @arg UART_LINBREAKDETECTLENGTH_10B: 10-bit break detection
+ * @arg UART_LINBREAKDETECTLENGTH_11B: 11-bit break detection
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength)
+{
+ /* Check the UART handle allocation */
+ if(huart == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_UART_LIN_INSTANCE(huart->Instance));
+ assert_param(IS_UART_LIN_BREAK_DETECT_LENGTH(BreakDetectLength));
+
+ /* LIN mode limited to 16-bit oversampling only */
+ if(huart->Init.OverSampling == UART_OVERSAMPLING_8)
+ {
+ return HAL_ERROR;
+ }
+
+ /* in LIN mode, data length is limited to 8-bit only */
+ if(huart->Init.WordLength!= UART_WORDLENGTH_8B)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Init the low level hardware : GPIO, CLOCK, CORTEX */
+ HAL_UART_MspInit(huart);
+
+ /* Disable the Peripheral */
+ __HAL_UART_DISABLE(huart);
+
+ /* Set the UART Communication parameters */
+ if (UART_SetConfig(huart) == HAL_ERROR)
+ {
+ return HAL_ERROR;
+ }
+
+ if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT)
+ {
+ UART_AdvFeatureConfig(huart);
+ }
+
+ /* In LIN mode, the following bits must be kept cleared:
+ - LINEN and CLKEN bits in the USART_CR2 register,
+ - SCEN and IREN bits in the USART_CR3 register.*/
+ huart->Instance->CR2 &= ~(USART_CR2_CLKEN);
+ huart->Instance->CR3 &= ~(USART_CR3_HDSEL | USART_CR3_IREN | USART_CR3_SCEN);
+
+ /* Enable the LIN mode by setting the LINEN bit in the CR2 register */
+ huart->Instance->CR2 |= USART_CR2_LINEN;
+
+ /* Set the USART LIN Break detection length. */
+ MODIFY_REG(huart->Instance->CR2, USART_CR2_LBDL, BreakDetectLength);
+
+ /* Enable the Peripheral */
+ __HAL_UART_ENABLE(huart);
+
+ /* TEACK and/or REACK to check before moving huart->State to Ready */
+ return (UART_CheckIdleState(huart));
+}
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) */
+/**
+ * @}
+ */
+
+/** @defgroup UARTEx_Exported_Functions_Group2 Extended IO operation function
+ * @brief Extended UART Interrupt handling function
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation function #####
+ ===============================================================================
+ [..]
+ This subsection provides functions allowing to manage the UART interrupts
+ and to handle Wake up interrupt call-back.
+
+ (#) Non-Blocking mode API with Interrupt is :
+ (++) HAL_UART_IRQHandler()
+
+ (#) Callback provided in No_Blocking mode:
+ (++) HAL_UART_WakeupCallback()
+
+@endverbatim
+ * @{
+ */
+
+
+/**
+ * @brief This function handles UART interrupt request.
+ * @param huart: uart handle
+ * @retval None
+ */
+void HAL_UART_IRQHandler(UART_HandleTypeDef *huart)
+{
+ /* UART parity error interrupt occurred -------------------------------------*/
+ if((__HAL_UART_GET_IT(huart, UART_IT_PE) != RESET) && (__HAL_UART_GET_IT_SOURCE(huart, UART_IT_PE) != RESET))
+ {
+ __HAL_UART_CLEAR_IT(huart, UART_CLEAR_PEF);
+
+ huart->ErrorCode |= HAL_UART_ERROR_PE;
+ /* Set the UART state ready to be able to start again the process */
+ huart->State = HAL_UART_STATE_READY;
+ }
+
+ /* UART frame error interrupt occured --------------------------------------*/
+ if((__HAL_UART_GET_IT(huart, UART_IT_FE) != RESET) && (__HAL_UART_GET_IT_SOURCE(huart, UART_IT_ERR) != RESET))
+ {
+ __HAL_UART_CLEAR_IT(huart, UART_CLEAR_FEF);
+
+ huart->ErrorCode |= HAL_UART_ERROR_FE;
+ /* Set the UART state ready to be able to start again the process */
+ huart->State = HAL_UART_STATE_READY;
+ }
+
+ /* UART noise error interrupt occured --------------------------------------*/
+ if((__HAL_UART_GET_IT(huart, UART_IT_NE) != RESET) && (__HAL_UART_GET_IT_SOURCE(huart, UART_IT_ERR) != RESET))
+ {
+ __HAL_UART_CLEAR_IT(huart, UART_CLEAR_NEF);
+
+ huart->ErrorCode |= HAL_UART_ERROR_NE;
+ /* Set the UART state ready to be able to start again the process */
+ huart->State = HAL_UART_STATE_READY;
+ }
+
+ /* UART Over-Run interrupt occured -----------------------------------------*/
+ if((__HAL_UART_GET_IT(huart, UART_IT_ORE) != RESET) && (__HAL_UART_GET_IT_SOURCE(huart, UART_IT_ERR) != RESET))
+ {
+ __HAL_UART_CLEAR_IT(huart, UART_CLEAR_OREF);
+
+ huart->ErrorCode |= HAL_UART_ERROR_ORE;
+ /* Set the UART state ready to be able to start again the process */
+ huart->State = HAL_UART_STATE_READY;
+ }
+
+ /* Call UART Error Call back function if need be --------------------------*/
+ if(huart->ErrorCode != HAL_UART_ERROR_NONE)
+ {
+ HAL_UART_ErrorCallback(huart);
+ }
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC)
+ /* UART wakeup from Stop mode interrupt occurred -------------------------------------*/
+ if((__HAL_UART_GET_IT(huart, UART_IT_WUF) != RESET) && (__HAL_UART_GET_IT_SOURCE(huart, UART_IT_WUF) != RESET))
+ {
+ __HAL_UART_CLEAR_IT(huart, UART_CLEAR_WUF);
+ /* Set the UART state ready to be able to start again the process */
+ huart->State = HAL_UART_STATE_READY;
+ HAL_UART_WakeupCallback(huart);
+ }
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) */
+
+ /* UART in mode Receiver ---------------------------------------------------*/
+ if((__HAL_UART_GET_IT(huart, UART_IT_RXNE) != RESET) && (__HAL_UART_GET_IT_SOURCE(huart, UART_IT_RXNE) != RESET))
+ {
+ UART_Receive_IT(huart);
+ /* Clear RXNE interrupt flag */
+ __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST);
+ }
+
+
+ /* UART in mode Transmitter ------------------------------------------------*/
+ if((__HAL_UART_GET_IT(huart, UART_IT_TXE) != RESET) &&(__HAL_UART_GET_IT_SOURCE(huart, UART_IT_TXE) != RESET))
+ {
+ UART_Transmit_IT(huart);
+ }
+
+ /* UART in mode Transmitter ------------------------------------------------*/
+ if((__HAL_UART_GET_IT(huart, UART_IT_TC) != RESET) &&(__HAL_UART_GET_IT_SOURCE(huart, UART_IT_TC) != RESET))
+ {
+ UART_EndTransmit_IT(huart);
+ }
+}
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC)
+/**
+ * @brief UART wakeup from Stop mode callback
+ * @param huart: uart handle
+ * @retval None
+ */
+ __weak void HAL_UART_WakeupCallback(UART_HandleTypeDef *huart)
+{
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_UART_WakeupCallback can be implemented in the user file
+ */
+}
+#endif /*!defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC)*/
+
+/**
+ * @}
+ */
+
+
+/** @defgroup UARTEx_Exported_Functions_Group3 Extended Peripheral Control functions
+ * @brief Extended Peripheral Control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control function #####
+ ===============================================================================
+ [..]
+ This subsection provides extended functions allowing to control the UART.
+ (+) HAL_MultiProcessorEx_AddressLength_Set() API optionally sets the UART node address
+ detection length to more than 4 bits for multiprocessor address mark wake up.
+ (+) HAL_UARTEx_StopModeWakeUpSourceConfig() API sets Wakeup from Stop mode interrupt flag selection
+ (+) HAL_UARTEx_EnableStopMode() API allows the UART to wake up the MCU from Stop mode as
+ long as UART clock is HSI or LSE
+ (+) HAL_UARTEx_DisableStopMode() API disables the above feature
+ (+) HAL_LIN_SendBreak() API transmits the break characters
+
+@endverbatim
+ * @{
+ */
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC)
+/**
+ * @brief Set Wakeup from Stop mode interrupt flag selection
+ * @param huart: uart handle,
+ * @param WakeUpSelection: address match, Start Bit detection or RXNE bit status.
+ * This parameter can be one of the following values:
+ * @arg UART_WAKEUP_ON_ADDRESS
+ * @arg UART_WAKEUP_ON_STARTBIT
+ * @arg UART_WAKEUP_ON_READDATA_NONEMPTY
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection)
+{
+ /* Check parameters */
+ assert_param(IS_UART_WAKEUP_INSTANCE(huart->Instance));
+ assert_param(IS_UART_WAKEUP_SELECTION(WakeUpSelection.WakeUpEvent));
+
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ huart->State = HAL_UART_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_UART_DISABLE(huart);
+
+ /* Set the wake-up selection scheme */
+ MODIFY_REG(huart->Instance->CR3, USART_CR3_WUS, WakeUpSelection.WakeUpEvent);
+
+ if (WakeUpSelection.WakeUpEvent == UART_WAKEUP_ON_ADDRESS)
+ {
+ UART_Wakeup_AddressConfig(huart, WakeUpSelection);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_UART_ENABLE(huart);
+
+ /* Wait until REACK flag is set */
+ if(UART_WaitOnFlagUntilTimeout(huart, USART_ISR_REACK, RESET, HAL_UART_TIMEOUT_VALUE) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ else
+ {
+ /* Initialize the UART State */
+ huart->State= HAL_UART_STATE_READY;
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+ return HAL_OK;
+ }
+}
+
+/**
+ * @brief Enable UART Stop Mode
+ * The UART is able to wake up the MCU from Stop mode as long as UART clock is HSI or LSE
+ * @param huart: uart handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart)
+{
+ /* Check parameter */
+ assert_param(IS_UART_WAKEUP_INSTANCE(huart->Instance));
+
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ huart->State = HAL_UART_STATE_BUSY;
+
+ /* Set the USART UESM bit */
+ huart->Instance->CR1 |= USART_CR1_UESM;
+
+ huart->State = HAL_UART_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disable UART Stop Mode
+ * @param huart: uart handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart)
+{
+ /* Check parameter */
+ assert_param(IS_UART_WAKEUP_INSTANCE(huart->Instance));
+
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ huart->State = HAL_UART_STATE_BUSY;
+
+ /* Clear USART UESM bit */
+ huart->Instance->CR1 &= ~(USART_CR1_UESM);
+
+ huart->State = HAL_UART_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ return HAL_OK;
+}
+
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) */
+
+/**
+ * @brief By default in multiprocessor mode, when the wake up method is set
+ * to address mark, the UART handles only 4-bit long addresses detection.
+ * This API allows to enable longer addresses detection (6-, 7- or 8-bit
+ * long):
+ * - 6-bit address detection in 7-bit data mode
+ * - 7-bit address detection in 8-bit data mode
+ * - 8-bit address detection in 9-bit data mode
+ * @param huart: UART handle
+ * @param AddressLength: this parameter can be one of the following values:
+ * @arg UART_ADDRESS_DETECT_4B: 4-bit long address
+ * @arg UART_ADDRESS_DETECT_7B: 6-, 7- or 8-bit long address
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength)
+{
+ /* Check the UART handle allocation */
+ if(huart == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the address length parameter */
+ assert_param(IS_UART_ADDRESSLENGTH_DETECT(AddressLength));
+
+ huart->State = HAL_UART_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_UART_DISABLE(huart);
+
+ /* Set the address length */
+ MODIFY_REG(huart->Instance->CR2, USART_CR2_ADDM7, AddressLength);
+
+ /* Enable the Peripheral */
+ __HAL_UART_ENABLE(huart);
+
+ /* TEACK and/or REACK to check before moving huart->State to Ready */
+ return (UART_CheckIdleState(huart));
+}
+
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC)
+/**
+ * @brief Transmits break characters.
+ * @param huart: UART handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart)
+{
+ /* Check the parameters */
+ assert_param(IS_UART_INSTANCE(huart->Instance));
+
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ huart->State = HAL_UART_STATE_BUSY;
+
+ /* Send break characters */
+ huart->Instance->RQR |= UART_SENDBREAK_REQUEST;
+
+ huart->State = HAL_UART_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ return HAL_OK;
+}
+
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup UARTEx_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Wraps up transmission in non blocking mode.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef UART_EndTransmit_IT(UART_HandleTypeDef *huart)
+{
+ /* Disable the UART Transmit Complete Interrupt */
+ __HAL_UART_DISABLE_IT(huart, UART_IT_TC);
+
+ /* Check if a receive process is ongoing or not */
+ if(huart->State == HAL_UART_STATE_BUSY_TX_RX)
+ {
+ huart->State = HAL_UART_STATE_BUSY_RX;
+ }
+ else
+ {
+ /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */
+ __HAL_UART_DISABLE_IT(huart, UART_IT_ERR);
+
+ huart->State = HAL_UART_STATE_READY;
+ }
+
+ HAL_UART_TxCpltCallback(huart);
+
+ return HAL_OK;
+}
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC)
+/**
+ * @brief Initializes the UART wake-up from stop mode parameters when triggered by address detection.
+ * @param huart: uart handle
+ * @param WakeUpSelection: UART wake up from stop mode parameters
+ * @retval HAL status
+ */
+static void UART_Wakeup_AddressConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection)
+{
+ /* Check parmeters */
+ assert_param(IS_UART_WAKEUP_INSTANCE(huart->Instance));
+ assert_param(IS_UART_ADDRESSLENGTH_DETECT(WakeUpSelection.AddressLength));
+
+ /* Set the USART address length */
+ MODIFY_REG(huart->Instance->CR2, USART_CR2_ADDM7, WakeUpSelection.AddressLength);
+
+ /* Set the USART address node */
+ MODIFY_REG(huart->Instance->CR2, USART_CR2_ADD, ((uint32_t)WakeUpSelection.Address << UART_CR2_ADDRESS_LSB_POS));
+}
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_UART_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/src/stm32f0xx_hal_usart.c b/f0/src/stm32f0xx_hal_usart.c
new file mode 100755
index 0000000000000000000000000000000000000000..5dec0b7f53000c1a3089ac4db33ebee818a04653
--- /dev/null
+++ b/f0/src/stm32f0xx_hal_usart.c
@@ -0,0 +1,1831 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_usart.c
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief USART HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Universal Synchronous Asynchronous Receiver Transmitter (USART) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral Control functions
+ * + Peripheral State and Errors functions
+ @verbatim
+ ===============================================================================
+ ##### How to use this driver #####
+ ===============================================================================
+ [..]
+ The USART HAL driver can be used as follows:
+
+ (#) Declare a USART_HandleTypeDef handle structure.
+ (#) Initialize the USART low level resources by implementing the HAL_USART_MspInit ()API:
+ (##) Enable the USARTx interface clock.
+ (##) USART pins configuration:
+ (+++) Enable the clock for the USART GPIOs.
+ (+++) Configure these USART pins as alternate function pull-up.
+ (##) NVIC configuration if you need to use interrupt process (HAL_USART_Transmit_IT(),
+ HAL_USART_Receive_IT() and HAL_USART_TransmitReceive_IT() APIs):
+ (+++) Configure the USARTx interrupt priority.
+ (+++) Enable the NVIC USART IRQ handle.
+ (##) DMA Configuration if you need to use DMA process (HAL_USART_Transmit_DMA()
+ HAL_USART_Receive_DMA() and HAL_USART_TransmitReceive_DMA() APIs):
+ (+++) Declare a DMA handle structure for the Tx/Rx channel.
+ (+++) Enable the DMAx interface clock.
+ (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters.
+ (+++) Configure the DMA Tx/Rx channel.
+ (+++) Associate the initilalized DMA handle to the USART DMA Tx/Rx handle.
+ (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx/Rx channel.
+
+ (#) Program the Baud Rate, Word Length , Stop Bit, Parity, Hardware
+ flow control and Mode(Receiver/Transmitter) in the husart Init structure.
+
+ (#) Initialize the USART registers by calling the HAL_USART_Init() API:
+ (++) These APIs configures also the low level Hardware GPIO, CLOCK, CORTEX...etc)
+ by calling the customed HAL_USART_MspInit(&husart) API.
+
+ -@@- The specific USART interrupts (Transmission complete interrupt,
+ RXNE interrupt and Error Interrupts) will be managed using the macros
+ __HAL_USART_ENABLE_IT() and __HAL_USART_DISABLE_IT() inside the transmit and receive process.
+
+ (#) Three operation modes are available within this driver :
+
+ *** Polling mode IO operation ***
+ =================================
+ [..]
+ (+) Send an amount of data in blocking mode using HAL_USART_Transmit()
+ (+) Receive an amount of data in blocking mode using HAL_USART_Receive()
+
+ *** Interrupt mode IO operation ***
+ ===================================
+ [..]
+ (+) Send an amount of data in non blocking mode using HAL_USART_Transmit_IT()
+ (+) At transmission end of half transfer HAL_USART_TxHalfCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_USART_TxHalfCpltCallback
+ (+) At transmission end of transfer HAL_USART_TxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_USART_TxCpltCallback
+ (+) Receive an amount of data in non blocking mode using HAL_USART_Receive_IT()
+ (+) At reception end of half transfer HAL_USART_RxHalfCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_USART_RxHalfCpltCallback
+ (+) At reception end of transfer HAL_USART_RxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_USART_RxCpltCallback
+ (+) In case of transfer Error, HAL_USART_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_USART_ErrorCallback
+
+ *** DMA mode IO operation ***
+ ==============================
+ [..]
+ (+) Send an amount of data in non blocking mode (DMA) using HAL_USART_Transmit_DMA()
+ (+) At transmission end of half transfer HAL_USART_TxHalfCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_USART_TxHalfCpltCallback
+ (+) At transmission end of transfer HAL_USART_TxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_USART_TxCpltCallback
+ (+) Receive an amount of data in non blocking mode (DMA) using HAL_USART_Receive_DMA()
+ (+) At reception end of half transfer HAL_USART_RxHalfCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_USART_RxHalfCpltCallback
+ (+) At reception end of transfer HAL_USART_RxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_USART_RxCpltCallback
+ (+) In case of transfer Error, HAL_USART_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_USART_ErrorCallback
+ (+) Pause the DMA Transfer using HAL_USART_DMAPause()
+ (+) Resume the DMA Transfer using HAL_USART_DMAResume()
+ (+) Stop the DMA Transfer using HAL_USART_DMAStop()
+
+ *** USART HAL driver macros list ***
+ =============================================
+ [..]
+ Below the list of most used macros in USART HAL driver.
+
+ (+) __HAL_USART_ENABLE: Enable the USART peripheral
+ (+) __HAL_USART_DISABLE: Disable the USART peripheral
+ (+) __HAL_USART_GET_FLAG : Check whether the specified USART flag is set or not
+ (+) __HAL_USART_CLEAR_FLAG : Clear the specified USART pending flag
+ (+) __HAL_USART_ENABLE_IT: Enable the specified USART interrupt
+ (+) __HAL_USART_DISABLE_IT: Disable the specified USART interrupt
+
+ [..]
+ (@) You can refer to the USART HAL driver header file for more useful macros
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup USART USART HAL module driver
+ * @brief HAL USART Synchronous module driver
+ * @{
+ */
+#ifdef HAL_USART_MODULE_ENABLED
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup USART_Private_Constants USART Private Constants
+ * @{
+ */
+#define DUMMY_DATA ((uint16_t) 0xFFFF)
+#define TEACK_REACK_TIMEOUT ((uint32_t) 1000)
+#define USART_TXDMA_TIMEOUTVALUE 22000
+#define USART_TIMEOUT_VALUE 22000
+#define USART_CR1_FIELDS ((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | \
+ USART_CR1_TE | USART_CR1_RE))
+#define USART_CR2_FIELDS ((uint32_t)(USART_CR2_CPHA | USART_CR2_CPOL | \
+ USART_CR2_CLKEN | USART_CR2_LBCL | USART_CR2_STOP))
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup USART_Private_Functions USART Private Functions
+ * @{
+ */
+static void USART_DMATransmitCplt(DMA_HandleTypeDef *hdma);
+static void USART_DMAReceiveCplt(DMA_HandleTypeDef *hdma);
+static void USART_DMATxHalfCplt(DMA_HandleTypeDef *hdma);
+static void USART_DMARxHalfCplt(DMA_HandleTypeDef *hdma);
+static void USART_DMAError(DMA_HandleTypeDef *hdma);
+static HAL_StatusTypeDef USART_WaitOnFlagUntilTimeout(USART_HandleTypeDef *husart, uint32_t Flag, FlagStatus Status, uint32_t Timeout);
+static HAL_StatusTypeDef USART_SetConfig(USART_HandleTypeDef *husart);
+static HAL_StatusTypeDef USART_CheckIdleState(USART_HandleTypeDef *husart);
+static HAL_StatusTypeDef USART_Transmit_IT(USART_HandleTypeDef *husart);
+static HAL_StatusTypeDef USART_EndTransmit_IT(USART_HandleTypeDef *husart);
+static HAL_StatusTypeDef USART_Receive_IT(USART_HandleTypeDef *husart);
+static HAL_StatusTypeDef USART_TransmitReceive_IT(USART_HandleTypeDef *husart);
+/**
+ * @}
+ */
+
+/* Exported functions ---------------------------------------------------------*/
+
+
+/** @defgroup USART_Exported_Functions USART Exported Functions
+ * @{
+ */
+
+/** @defgroup USART_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Initialization and Configuration functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to initialize the USART
+ in asynchronous and in synchronous modes.
+ (+) For the asynchronous mode only these parameters can be configured:
+ (++) Baud Rate
+ (++) Word Length
+ (++) Stop Bit
+ (++) Parity: If the parity is enabled, then the MSB bit of the data written
+ in the data register is transmitted but is changed by the parity bit.
+ Depending on the frame length defined by the M bit (8-bits or 9-bits)
+ or by the M1 and M0 bits (7-bit, 8-bit or 9-bit),
+ the possible USART frame formats are as listed in the following table:
+ +---------------------------------------------------------------+
+ | M bit | PCE bit | USART frame |
+ |-----------|-----------|---------------------------------------|
+ | 0 | 0 | | SB | 8-bit data | STB | |
+ |-----------|-----------|---------------------------------------|
+ | 0 | 1 | | SB | 7-bit data | PB | STB | |
+ |-----------|-----------|---------------------------------------|
+ | 1 | 0 | | SB | 9-bit data | STB | |
+ |-----------|-----------|---------------------------------------|
+ | 1 | 1 | | SB | 8-bit data | PB | STB | |
+ +---------------------------------------------------------------+
+ | M1M0 bits | PCE bit | USART frame |
+ |-----------------------|---------------------------------------|
+ | 10 | 0 | | SB | 7-bit data | STB | |
+ |-----------|-----------|---------------------------------------|
+ | 10 | 1 | | SB | 6-bit data | PB | STB | |
+ +---------------------------------------------------------------+
+ (++) USART polarity
+ (++) USART phase
+ (++) USART LastBit
+ (++) Receiver/transmitter modes
+
+ [..]
+ The HAL_USART_Init() function follows the USART synchronous configuration
+ procedure (details for the procedure are available in reference manual).
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the USART mode according to the specified
+ * parameters in the USART_InitTypeDef and create the associated handle .
+ * @param husart: usart handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_USART_Init(USART_HandleTypeDef *husart)
+{
+ /* Check the USART handle allocation */
+ if(husart == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_USART_INSTANCE(husart->Instance));
+
+ if(husart->State == HAL_USART_STATE_RESET)
+ {
+ /* Init the low level hardware : GPIO, CLOCK */
+ HAL_USART_MspInit(husart);
+ }
+
+ husart->State = HAL_USART_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_USART_DISABLE(husart);
+
+ /* Set the Usart Communication parameters */
+ if (USART_SetConfig(husart) == HAL_ERROR)
+ {
+ return HAL_ERROR;
+ }
+
+ /* In Synchronous mode, the following bits must be kept cleared:
+ - LINEN bit in the USART_CR2 register
+ - HDSEL, SCEN and IREN bits in the USART_CR3 register.*/
+ husart->Instance->CR2 &= ~USART_CR2_LINEN;
+ husart->Instance->CR3 &= ~(USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN);
+
+ /* Enable the Peripharal */
+ __HAL_USART_ENABLE(husart);
+
+ /* TEACK and/or REACK to check before moving husart->State to Ready */
+ return (USART_CheckIdleState(husart));
+}
+
+/**
+ * @brief DeInitializes the USART peripheral
+ * @param husart: usart handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_USART_DeInit(USART_HandleTypeDef *husart)
+{
+ /* Check the USART handle allocation */
+ if(husart == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_USART_INSTANCE(husart->Instance));
+
+ husart->State = HAL_USART_STATE_BUSY;
+
+ husart->Instance->CR1 = 0x0;
+ husart->Instance->CR2 = 0x0;
+ husart->Instance->CR3 = 0x0;
+
+ /* DeInit the low level hardware */
+ HAL_USART_MspDeInit(husart);
+
+ husart->ErrorCode = HAL_USART_ERROR_NONE;
+ husart->State = HAL_USART_STATE_RESET;
+
+ /* Process Unlock */
+ __HAL_UNLOCK(husart);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief USART MSP Init
+ * @param husart: usart handle
+ * @retval None
+ */
+ __weak void HAL_USART_MspInit(USART_HandleTypeDef *husart)
+{
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_USART_MspInit can be implemented in the user file
+ */
+}
+
+/**
+ * @brief USART MSP DeInit
+ * @param husart: usart handle
+ * @retval None
+ */
+ __weak void HAL_USART_MspDeInit(USART_HandleTypeDef *husart)
+{
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_USART_MspDeInit can be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_Exported_Functions_Group2 IO operation functions
+ * @brief USART Transmit and Receive functions
+ *
+@verbatim
+ ==============================================================================
+ ##### IO operation functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the USART synchronous
+ data transfers.
+
+ [..]
+ The USART supports master mode only: it cannot receive or send data related to an input
+ clock (SCLK is always an output).
+
+ (#) There are two modes of transfer:
+ (++) Blocking mode: The communication is performed in polling mode.
+ The HAL status of all data processing is returned by the same function
+ after finishing transfer.
+ (++) Non Blocking mode: The communication is performed using Interrupts
+ or DMA, These APIs return the HAL status.
+ The end of the data processing will be indicated through the
+ dedicated USART IRQ when using Interrupt mode or the DMA IRQ when
+ using DMA mode.
+ The HAL_USART_TxCpltCallback(), HAL_USART_RxCpltCallback() and HAL_USART_TxRxCpltCallback() user callbacks
+ will be executed respectivelly at the end of the transmit or Receive process
+ The HAL_USART_ErrorCallback()user callback will be executed when a communication error is detected
+
+ (#) Blocking mode APIs are :
+ (++) HAL_USART_Transmit()in simplex mode
+ (++) HAL_USART_Receive() in full duplex receive only
+ (++) HAL_USART_TransmitReceive() in full duplex mode
+
+ (#) Non Blocking mode APIs with Interrupt are :
+ (++) HAL_USART_Transmit_IT()in simplex mode
+ (++) HAL_USART_Receive_IT() in full duplex receive only
+ (++) HAL_USART_TransmitReceive_IT()in full duplex mode
+ (++) HAL_USART_IRQHandler()
+
+ (#) Non Blocking mode functions with DMA are :
+ (++) HAL_USART_Transmit_DMA()in simplex mode
+ (++) HAL_USART_Receive_DMA() in full duplex receive only
+ (++) HAL_USART_TransmitReceive_DMA() in full duplex mode
+ (++) HAL_USART_DMAPause()
+ (++) HAL_USART_DMAResume()
+ (++) HAL_USART_DMAStop()
+
+ (#) A set of Transfer Complete Callbacks are provided in non Blocking mode:
+ (++) HAL_USART_TxCpltCallback()
+ (++) HAL_USART_RxCpltCallback()
+ (++) HAL_USART_TxHalfCpltCallback()
+ (++) HAL_USART_RxHalfCpltCallback()
+ (++) HAL_USART_ErrorCallback()
+ (++) HAL_USART_TxRxCpltCallback()
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Simplex Send an amount of data in blocking mode
+ * @param husart: USART handle
+ * @param pTxData: pointer to data buffer
+ * @param Size: amount of data to be sent
+ * @param Timeout : Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size, uint32_t Timeout)
+{
+ uint16_t* tmp=0;
+
+ if(husart->State == HAL_USART_STATE_READY)
+ {
+ if((pTxData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(husart);
+
+ husart->ErrorCode = HAL_USART_ERROR_NONE;
+ husart->State = HAL_USART_STATE_BUSY_TX;
+
+ husart->TxXferSize = Size;
+ husart->TxXferCount = Size;
+
+ /* Check the remaining data to be sent */
+ while(husart->TxXferCount > 0)
+ {
+ husart->TxXferCount--;
+ if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TC, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE))
+ {
+ tmp = (uint16_t*) pTxData;
+ husart->Instance->TDR = (*tmp & (uint16_t)0x01FF);
+ pTxData += 2;
+ }
+ else
+ {
+ husart->Instance->TDR = (*pTxData++ & (uint8_t)0xFF);
+ }
+ }
+
+ if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TC, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ husart->State = HAL_USART_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(husart);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data in blocking mode
+ * To receive synchronous data, dummy data are simultaneously transmitted
+ * @param husart: USART handle
+ * @param pRxData: pointer to data buffer
+ * @param Size: amount of data to be received
+ * @param Timeout : Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_USART_Receive(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size, uint32_t Timeout)
+{
+ uint16_t* tmp=0;
+ uint16_t uhMask;
+
+ if(husart->State == HAL_USART_STATE_READY)
+ {
+ if((pRxData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+ /* Process Locked */
+ __HAL_LOCK(husart);
+
+ husart->ErrorCode = HAL_USART_ERROR_NONE;
+ husart->State = HAL_USART_STATE_BUSY_RX;
+
+ husart->RxXferSize = Size;
+ husart->RxXferCount = Size;
+
+ /* Computation of USART mask to apply to RDR register */
+ __HAL_USART_MASK_COMPUTATION(husart);
+ uhMask = husart->Mask;
+
+ /* as long as data have to be received */
+ while(husart->RxXferCount > 0)
+ {
+ husart->RxXferCount--;
+
+ /* Wait until TC flag is set to send dummy byte in order to generate the
+ * clock for the slave to send data.
+ * Whatever the frame length (7, 8 or 9-bit long), the same dummy value
+ * can be written for all the cases. */
+ if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TC, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ husart->Instance->TDR = (DUMMY_DATA & (uint16_t)0x0FF);
+
+ /* Wait for RXNE Flag */
+ if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE))
+ {
+ tmp = (uint16_t*) pRxData ;
+ *tmp = (uint16_t)(husart->Instance->RDR & uhMask);
+ pRxData +=2;
+ }
+ else
+ {
+ *pRxData++ = (uint8_t)(husart->Instance->RDR & (uint8_t)uhMask);
+ }
+ }
+
+ husart->State = HAL_USART_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(husart);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Full-Duplex Send and Receive an amount of data in blocking mode
+ * @param husart: USART handle
+ * @param pTxData: pointer to TX data buffer
+ * @param pRxData: pointer to RX data buffer
+ * @param Size: amount of data to be sent (same amount to be received)
+ * @param Timeout : Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout)
+{
+ uint16_t* tmp=0;
+ uint16_t uhMask;
+
+ if(husart->State == HAL_USART_STATE_READY)
+ {
+ if((pTxData == NULL) || (pRxData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+ /* Process Locked */
+ __HAL_LOCK(husart);
+
+ husart->ErrorCode = HAL_USART_ERROR_NONE;
+ husart->State = HAL_USART_STATE_BUSY_RX;
+
+ husart->RxXferSize = Size;
+ husart->TxXferSize = Size;
+ husart->TxXferCount = Size;
+ husart->RxXferCount = Size;
+
+ /* Computation of USART mask to apply to RDR register */
+ __HAL_USART_MASK_COMPUTATION(husart);
+ uhMask = husart->Mask;
+
+ /* Check the remain data to be sent */
+ while(husart->TxXferCount > 0)
+ {
+ husart->TxXferCount--;
+ husart->RxXferCount--;
+
+ /* Wait until TC flag is set to send data */
+ if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TC, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE))
+ {
+ tmp = (uint16_t*) pTxData;
+ husart->Instance->TDR = (*tmp & uhMask);
+ pTxData += 2;
+ }
+ else
+ {
+ husart->Instance->TDR = (*pTxData++ & (uint8_t)uhMask);
+ }
+
+ /* Wait for RXNE Flag */
+ if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE))
+ {
+ tmp = (uint16_t*) pRxData ;
+ *tmp = (uint16_t)(husart->Instance->RDR & uhMask);
+ pRxData +=2;
+ }
+ else
+ {
+ *pRxData++ = (uint8_t)(husart->Instance->RDR & (uint8_t)uhMask);
+ }
+ }
+
+ husart->State = HAL_USART_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(husart);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Send an amount of data in interrupt mode
+ * @param husart: USART handle
+ * @param pTxData: pointer to data buffer
+ * @param Size: amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_USART_Transmit_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size)
+{
+ if(husart->State == HAL_USART_STATE_READY)
+ {
+ if((pTxData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(husart);
+
+ husart->pTxBuffPtr = pTxData;
+ husart->TxXferSize = Size;
+ husart->TxXferCount = Size;
+
+ husart->ErrorCode = HAL_USART_ERROR_NONE;
+ husart->State = HAL_USART_STATE_BUSY_TX;
+
+ /* The USART Error Interrupts: (Frame error, noise error, overrun error)
+ are not managed by the USART Transmit Process to avoid the overrun interrupt
+ when the usart mode is configured for transmit and receive "USART_MODE_TX_RX"
+ to benefit for the frame error and noise interrupts the usart mode should be
+ configured only for transmit "USART_MODE_TX" */
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(husart);
+
+ /* Enable the USART Transmit Data Register Empty Interrupt */
+ __HAL_USART_ENABLE_IT(husart, USART_IT_TXE);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data in blocking mode
+ * To receive synchronous data, dummy data are simultaneously transmitted
+ * @param husart: usart handle
+ * @param pRxData: pointer to data buffer
+ * @param Size: amount of data to be received
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_USART_Receive_IT(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size)
+{
+ if(husart->State == HAL_USART_STATE_READY)
+ {
+ if((pRxData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+ /* Process Locked */
+ __HAL_LOCK(husart);
+
+ husart->pRxBuffPtr = pRxData;
+ husart->RxXferSize = Size;
+ husart->RxXferCount = Size;
+
+ __HAL_USART_MASK_COMPUTATION(husart);
+
+ husart->ErrorCode = HAL_USART_ERROR_NONE;
+ husart->State = HAL_USART_STATE_BUSY_RX;
+
+ /* Enable the USART Parity Error Interrupt */
+ __HAL_USART_ENABLE_IT(husart, USART_IT_PE);
+
+ /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */
+ __HAL_USART_ENABLE_IT(husart, USART_IT_ERR);
+
+ /* Enable the USART Data Register not empty Interrupt */
+ __HAL_USART_ENABLE_IT(husart, USART_IT_RXNE);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(husart);
+
+
+ /* Send dummy byte in order to generate the clock for the Slave to send the next data */
+ if(husart->Init.WordLength == USART_WORDLENGTH_9B)
+ {
+ husart->Instance->TDR = (DUMMY_DATA & (uint16_t)0x01FF);
+ }
+ else
+ {
+ husart->Instance->TDR = (DUMMY_DATA & (uint16_t)0x00FF);
+ }
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Full-Duplex Send and Receive an amount of data in interrupt mode
+ * @param husart: USART handle
+ * @param pTxData: pointer to TX data buffer
+ * @param pRxData: pointer to RX data buffer
+ * @param Size: amount of data to be sent (same amount to be received)
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size)
+{
+ if(husart->State == HAL_USART_STATE_READY)
+ {
+ if((pTxData == NULL) || (pRxData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+ /* Process Locked */
+ __HAL_LOCK(husart);
+
+ husart->pRxBuffPtr = pRxData;
+ husart->RxXferSize = Size;
+ husart->RxXferCount = Size;
+ husart->pTxBuffPtr = pTxData;
+ husart->TxXferSize = Size;
+ husart->TxXferCount = Size;
+
+ /* Computation of USART mask to apply to RDR register */
+ __HAL_USART_MASK_COMPUTATION(husart);
+
+ husart->ErrorCode = HAL_USART_ERROR_NONE;
+ husart->State = HAL_USART_STATE_BUSY_TX_RX;
+
+ /* Enable the USART Data Register not empty Interrupt */
+ __HAL_USART_ENABLE_IT(husart, USART_IT_RXNE);
+
+ /* Enable the USART Parity Error Interrupt */
+ __HAL_USART_ENABLE_IT(husart, USART_IT_PE);
+
+ /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */
+ __HAL_USART_ENABLE_IT(husart, USART_IT_ERR);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(husart);
+
+ /* Enable the USART Transmit Data Register Empty Interrupt */
+ __HAL_USART_ENABLE_IT(husart, USART_IT_TXE);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Send an amount of data in DMA mode
+ * @param husart: USART handle
+ * @param pTxData: pointer to data buffer
+ * @param Size: amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size)
+{
+ uint32_t *tmp=0;
+
+ if(husart->State == HAL_USART_STATE_READY)
+ {
+ if((pTxData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+ /* Process Locked */
+ __HAL_LOCK(husart);
+
+ husart->pTxBuffPtr = pTxData;
+ husart->TxXferSize = Size;
+ husart->TxXferCount = Size;
+
+ husart->ErrorCode = HAL_USART_ERROR_NONE;
+ husart->State = HAL_USART_STATE_BUSY_TX;
+
+ /* Set the USART DMA transfer complete callback */
+ husart->hdmatx->XferCpltCallback = USART_DMATransmitCplt;
+
+ /* Set the USART DMA Half transfer complete callback */
+ husart->hdmatx->XferHalfCpltCallback = USART_DMATxHalfCplt;
+
+ /* Set the DMA error callback */
+ husart->hdmatx->XferErrorCallback = USART_DMAError;
+
+ /* Enable the USART transmit DMA channel */
+ tmp = (uint32_t*)&pTxData;
+ HAL_DMA_Start_IT(husart->hdmatx, *(uint32_t*)tmp, (uint32_t)&husart->Instance->TDR, Size);
+
+ /* Enable the DMA transfer for transmit request by setting the DMAT bit
+ in the USART CR3 register */
+ husart->Instance->CR3 |= USART_CR3_DMAT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(husart);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Full-Duplex Receive an amount of data in non-blocking mode
+ * @param husart: USART handle
+ * @param pRxData: pointer to data buffer
+ * @param Size: amount of data to be received
+ * @note When the USART parity is enabled (PCE = 1), the received data contain
+ * the parity bit (MSB position)
+ * @retval HAL status
+ * @note The USART DMA transmit channel must be configured in order to generate the clock for the slave.
+ */
+HAL_StatusTypeDef HAL_USART_Receive_DMA(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size)
+{
+ uint32_t *tmp=0;
+
+ if(husart->State == HAL_USART_STATE_READY)
+ {
+ if((pRxData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(husart);
+
+ husart->pRxBuffPtr = pRxData;
+ husart->RxXferSize = Size;
+ husart->pTxBuffPtr = pRxData;
+ husart->TxXferSize = Size;
+
+ husart->ErrorCode = HAL_USART_ERROR_NONE;
+ husart->State = HAL_USART_STATE_BUSY_RX;
+
+ /* Set the USART DMA Rx transfer complete callback */
+ husart->hdmarx->XferCpltCallback = USART_DMAReceiveCplt;
+
+ /* Set the USART DMA Half transfer complete callback */
+ husart->hdmarx->XferHalfCpltCallback = USART_DMARxHalfCplt;
+
+ /* Set the USART DMA Rx transfer error callback */
+ husart->hdmarx->XferErrorCallback = USART_DMAError;
+
+ /* Enable the USART receive DMA channel */
+ tmp = (uint32_t*)&pRxData;
+ HAL_DMA_Start_IT(husart->hdmarx, (uint32_t)&husart->Instance->RDR, *(uint32_t*)tmp, Size);
+
+ /* Enable the USART transmit DMA channel: the transmit channel is used in order
+ to generate in the non-blocking mode the clock to the slave device,
+ this mode isn't a simplex receive mode but a full-duplex receive mode */
+ tmp = (uint32_t*)&pRxData;
+ HAL_DMA_Start_IT(husart->hdmatx, *(uint32_t*)tmp, (uint32_t)&husart->Instance->TDR, Size);
+
+ /* Enable the DMA transfer for the receiver request by setting the DMAR bit
+ in the USART CR3 register */
+ husart->Instance->CR3 |= USART_CR3_DMAR;
+
+ /* Enable the DMA transfer for transmit request by setting the DMAT bit
+ in the USART CR3 register */
+ husart->Instance->CR3 |= USART_CR3_DMAT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(husart);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Full-Duplex Transmit Receive an amount of data in non blocking mode
+ * @param husart: usart handle
+ * @param pTxData: pointer to TX data buffer
+ * @param pRxData: pointer to RX data buffer
+ * @param Size: amount of data to be received/sent
+ * @note When the USART parity is enabled (PCE = 1) the data received contain the parity bit.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_USART_TransmitReceive_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size)
+{
+ uint32_t *tmp=0;
+
+ if(husart->State == HAL_USART_STATE_READY)
+ {
+ if((pTxData == NULL) || (pRxData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+ /* Process Locked */
+ __HAL_LOCK(husart);
+
+ husart->pRxBuffPtr = pRxData;
+ husart->RxXferSize = Size;
+ husart->pTxBuffPtr = pTxData;
+ husart->TxXferSize = Size;
+
+ husart->ErrorCode = HAL_USART_ERROR_NONE;
+ husart->State = HAL_USART_STATE_BUSY_TX_RX;
+
+ /* Set the USART DMA Rx transfer complete callback */
+ husart->hdmarx->XferCpltCallback = USART_DMAReceiveCplt;
+
+ /* Set the USART DMA Half transfer complete callback */
+ husart->hdmarx->XferHalfCpltCallback = USART_DMARxHalfCplt;
+
+ /* Set the USART DMA Tx transfer complete callback */
+ husart->hdmatx->XferCpltCallback = USART_DMATransmitCplt;
+
+ /* Set the USART DMA Half transfer complete callback */
+ husart->hdmatx->XferHalfCpltCallback = USART_DMATxHalfCplt;
+
+ /* Set the USART DMA Tx transfer error callback */
+ husart->hdmatx->XferErrorCallback = USART_DMAError;
+
+ /* Set the USART DMA Rx transfer error callback */
+ husart->hdmarx->XferErrorCallback = USART_DMAError;
+
+ /* Enable the USART receive DMA channel */
+ tmp = (uint32_t*)&pRxData;
+ HAL_DMA_Start_IT(husart->hdmarx, (uint32_t)&husart->Instance->RDR, *(uint32_t*)tmp, Size);
+
+ /* Enable the USART transmit DMA channel */
+ tmp = (uint32_t*)&pTxData;
+ HAL_DMA_Start_IT(husart->hdmatx, *(uint32_t*)tmp, (uint32_t)&husart->Instance->TDR, Size);
+
+ /* Enable the DMA transfer for the receiver request by setting the DMAR bit
+ in the USART CR3 register */
+ husart->Instance->CR3 |= USART_CR3_DMAR;
+
+ /* Enable the DMA transfer for transmit request by setting the DMAT bit
+ in the USART CR3 register */
+ husart->Instance->CR3 |= USART_CR3_DMAT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(husart);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Pauses the DMA Transfer.
+ * @param husart: USART handle
+ * @retval None
+ */
+HAL_StatusTypeDef HAL_USART_DMAPause(USART_HandleTypeDef *husart)
+{
+ /* Process Locked */
+ __HAL_LOCK(husart);
+
+ if(husart->State == HAL_USART_STATE_BUSY_TX)
+ {
+ /* Disable the USART DMA Tx request */
+ husart->Instance->CR3 &= (uint32_t)(~USART_CR3_DMAT);
+ }
+ else if(husart->State == HAL_USART_STATE_BUSY_RX)
+ {
+ /* Disable the USART DMA Rx request */
+ husart->Instance->CR3 &= (uint32_t)(~USART_CR3_DMAR);
+ }
+ else if(husart->State == HAL_USART_STATE_BUSY_TX_RX)
+ {
+ /* Disable the USART DMA Tx request */
+ husart->Instance->CR3 &= (uint32_t)(~USART_CR3_DMAT);
+ /* Disable the USART DMA Rx request */
+ husart->Instance->CR3 &= (uint32_t)(~USART_CR3_DMAR);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(husart);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Resumes the DMA Transfer.
+ * @param husart: USART handle
+ * @retval None
+ */
+HAL_StatusTypeDef HAL_USART_DMAResume(USART_HandleTypeDef *husart)
+{
+ /* Process Locked */
+ __HAL_LOCK(husart);
+
+ if(husart->State == HAL_USART_STATE_BUSY_TX)
+ {
+ /* Enable the USART DMA Tx request */
+ husart->Instance->CR3 |= USART_CR3_DMAT;
+ }
+ else if(husart->State == HAL_USART_STATE_BUSY_RX)
+ {
+ /* Enable the USART DMA Rx request */
+ husart->Instance->CR3 |= USART_CR3_DMAR;
+ }
+ else if(husart->State == HAL_USART_STATE_BUSY_TX_RX)
+ {
+ /* Enable the USART DMA Rx request before the DMA Tx request */
+ husart->Instance->CR3 |= USART_CR3_DMAR;
+ /* Enable the USART DMA Tx request */
+ husart->Instance->CR3 |= USART_CR3_DMAT;
+ }
+
+ /* If the USART peripheral is still not enabled, enable it */
+ if ((husart->Instance->CR1 & USART_CR1_UE) == 0)
+ {
+ /* Enable USART peripheral */
+ __HAL_USART_ENABLE(husart);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(husart);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the DMA Transfer.
+ * @param husart: USART handle
+ * @retval None
+ */
+HAL_StatusTypeDef HAL_USART_DMAStop(USART_HandleTypeDef *husart)
+{
+ /* Process Locked */
+ __HAL_LOCK(husart);
+
+ /* Disable the USART Tx/Rx DMA requests */
+ husart->Instance->CR3 &= ~USART_CR3_DMAT;
+ husart->Instance->CR3 &= ~USART_CR3_DMAR;
+
+ /* Abort the USART DMA tx Channel */
+ if(husart->hdmatx != NULL)
+ {
+ HAL_DMA_Abort(husart->hdmatx);
+ }
+ /* Abort the USART DMA rx Channel */
+ if(husart->hdmarx != NULL)
+ {
+ HAL_DMA_Abort(husart->hdmarx);
+ }
+
+ /* Disable USART peripheral */
+ __HAL_USART_DISABLE(husart);
+
+ husart->State = HAL_USART_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(husart);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles USART interrupt request.
+ * @param husart: USART handle
+ * @retval None
+ */
+void HAL_USART_IRQHandler(USART_HandleTypeDef *husart)
+{
+
+ /* USART parity error interrupt occured ------------------------------------*/
+ if((__HAL_USART_GET_IT(husart, USART_IT_PE) != RESET) && (__HAL_USART_GET_IT_SOURCE(husart, USART_IT_PE) != RESET))
+ {
+ __HAL_USART_CLEAR_IT(husart, USART_IT_PE);
+ husart->ErrorCode |= HAL_USART_ERROR_PE;
+ /* Set the USART state ready to be able to start again the process */
+ husart->State = HAL_USART_STATE_READY;
+ }
+
+ /* USART frame error interrupt occured -------------------------------------*/
+ if((__HAL_USART_GET_IT(husart, USART_IT_FE) != RESET) && (__HAL_USART_GET_IT_SOURCE(husart, USART_IT_ERR) != RESET))
+ {
+ __HAL_USART_CLEAR_IT(husart, USART_IT_FE);
+ husart->ErrorCode |= HAL_USART_ERROR_FE;
+ /* Set the USART state ready to be able to start again the process */
+ husart->State = HAL_USART_STATE_READY;
+ }
+
+ /* USART noise error interrupt occured -------------------------------------*/
+ if((__HAL_USART_GET_IT(husart, USART_IT_NE) != RESET) && (__HAL_USART_GET_IT_SOURCE(husart, USART_IT_ERR) != RESET))
+ {
+ __HAL_USART_CLEAR_IT(husart, USART_IT_NE);
+ husart->ErrorCode |= HAL_USART_ERROR_NE;
+ /* Set the USART state ready to be able to start again the process */
+ husart->State = HAL_USART_STATE_READY;
+ }
+
+ /* USART Over-Run interrupt occured ----------------------------------------*/
+ if((__HAL_USART_GET_IT(husart, USART_IT_ORE) != RESET) && (__HAL_USART_GET_IT_SOURCE(husart, USART_IT_ERR) != RESET))
+ {
+ __HAL_USART_CLEAR_IT(husart, USART_IT_ORE);
+ husart->ErrorCode |= HAL_USART_ERROR_ORE;
+ /* Set the USART state ready to be able to start again the process */
+ husart->State = HAL_USART_STATE_READY;
+ }
+
+ /* Call USART Error Call back function if need be --------------------------*/
+ if(husart->ErrorCode != HAL_USART_ERROR_NONE)
+ {
+ HAL_USART_ErrorCallback(husart);
+ }
+
+ /* USART in mode Receiver --------------------------------------------------*/
+ if((__HAL_USART_GET_IT(husart, USART_IT_RXNE) != RESET) && (__HAL_USART_GET_IT_SOURCE(husart, USART_IT_RXNE) != RESET))
+ {
+ if(husart->State == HAL_USART_STATE_BUSY_RX)
+ {
+ USART_Receive_IT(husart);
+ }
+ else
+ {
+ USART_TransmitReceive_IT(husart);
+ }
+ }
+
+ /* USART in mode Transmitter -----------------------------------------------*/
+ if((__HAL_USART_GET_IT(husart, USART_IT_TXE) != RESET) &&(__HAL_USART_GET_IT_SOURCE(husart, USART_IT_TXE) != RESET))
+ {
+ if(husart->State == HAL_USART_STATE_BUSY_TX)
+ {
+ USART_Transmit_IT(husart);
+ }
+ else
+ {
+ USART_TransmitReceive_IT(husart);
+ }
+ }
+
+ /* USART in mode Transmitter (transmission end) -----------------------------*/
+ if((__HAL_USART_GET_IT(husart, USART_IT_TC) != RESET) &&(__HAL_USART_GET_IT_SOURCE(husart, USART_IT_TC) != RESET))
+ {
+ USART_EndTransmit_IT(husart);
+ }
+
+}
+
+
+/**
+ * @brief Tx Transfer completed callbacks
+ * @param husart: usart handle
+ * @retval None
+ */
+__weak void HAL_USART_TxCpltCallback(USART_HandleTypeDef *husart)
+{
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_USART_TxCpltCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief Tx Half Transfer completed callbacks.
+ * @param husart: USART handle
+ * @retval None
+ */
+ __weak void HAL_USART_TxHalfCpltCallback(USART_HandleTypeDef *husart)
+{
+ /* NOTE: This function should not be modified, when the callback is needed,
+ the HAL_USART_TxHalfCpltCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Transfer completed callbacks.
+ * @param husart: USART handle
+ * @retval None
+ */
+__weak void HAL_USART_RxCpltCallback(USART_HandleTypeDef *husart)
+{
+ /* NOTE: This function should not be modified, when the callback is needed,
+ the HAL_USART_RxCpltCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Half Transfer completed callbacks
+ * @param husart: usart handle
+ * @retval None
+ */
+__weak void HAL_USART_RxHalfCpltCallback(USART_HandleTypeDef *husart)
+{
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_USART_RxHalfCpltCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief Tx/Rx Transfers completed callback for the non-blocking process
+ * @param husart: usart handle
+ * @retval None
+ */
+__weak void HAL_USART_TxRxCpltCallback(USART_HandleTypeDef *husart)
+{
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_USART_TxRxCpltCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief USART error callbacks
+ * @param husart: usart handle
+ * @retval None
+ */
+__weak void HAL_USART_ErrorCallback(USART_HandleTypeDef *husart)
+{
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_USART_ErrorCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_Exported_Functions_Group3 Peripheral State and Errors functions
+ * @brief USART control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the USART.
+ (+) HAL_USART_GetState() API can be helpful to check in run-time the state of the USART peripheral.
+ (+) USART_SetConfig() API is used to set the USART communication parameters.
+ (+) USART_CheckIdleState() APi ensures that TEACK and/or REACK bits are set after initialization
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief return the USART state
+ * @param husart: USART handle
+ * @retval HAL state
+ */
+HAL_USART_StateTypeDef HAL_USART_GetState(USART_HandleTypeDef *husart)
+{
+ return husart->State;
+}
+
+/**
+ * @brief Return the USART error code
+ * @param husart : pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART.
+ * @retval USART Error Code
+ */
+uint32_t HAL_USART_GetError(USART_HandleTypeDef *husart)
+{
+ return husart->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_Private_Functions USART Private Functions
+ * @brief USART Private functions
+ * @{
+ */
+
+/**
+ * @brief Configure the USART peripheral
+ * @param husart: USART handle
+ * @retval None
+ */
+static HAL_StatusTypeDef USART_SetConfig(USART_HandleTypeDef *husart)
+{
+ uint32_t tmpreg = 0x0;
+ USART_ClockSourceTypeDef clocksource = USART_CLOCKSOURCE_UNDEFINED;
+ HAL_StatusTypeDef ret = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_USART_POLARITY(husart->Init.CLKPolarity));
+ assert_param(IS_USART_PHASE(husart->Init.CLKPhase));
+ assert_param(IS_USART_LASTBIT(husart->Init.CLKLastBit));
+ assert_param(IS_USART_BAUDRATE(husart->Init.BaudRate));
+ assert_param(IS_USART_WORD_LENGTH(husart->Init.WordLength));
+ assert_param(IS_USART_STOPBITS(husart->Init.StopBits));
+ assert_param(IS_USART_PARITY(husart->Init.Parity));
+ assert_param(IS_USART_MODE(husart->Init.Mode));
+
+
+ /*-------------------------- USART CR1 Configuration -----------------------*/
+ /* Clear M, PCE, PS, TE and RE bits and configure
+ * the USART Word Length, Parity and Mode:
+ * set the M bits according to husart->Init.WordLength value
+ * set PCE and PS bits according to husart->Init.Parity value
+ * set TE and RE bits according to husart->Init.Mode value */
+ tmpreg = (uint32_t)husart->Init.WordLength | husart->Init.Parity | husart->Init.Mode;
+ MODIFY_REG(husart->Instance->CR1, USART_CR1_FIELDS, tmpreg);
+
+ /*---------------------------- USART CR2 Configuration ---------------------*/
+ /* Clear and configure the USART Clock, CPOL, CPHA, LBCL and STOP bits:
+ * set CPOL bit according to husart->Init.CLKPolarity value
+ * set CPHA bit according to husart->Init.CLKPhase value
+ * set LBCL bit according to husart->Init.CLKLastBit value
+ * set STOP[13:12] bits according to husart->Init.StopBits value */
+ tmpreg = (uint32_t)(USART_CLOCK_ENABLED);
+ tmpreg |= ((uint32_t)husart->Init.CLKPolarity | (uint32_t)husart->Init.CLKPhase);
+ tmpreg |= ((uint32_t)husart->Init.CLKLastBit | (uint32_t)husart->Init.StopBits);
+ MODIFY_REG(husart->Instance->CR2, USART_CR2_FIELDS, tmpreg);
+
+ /*-------------------------- USART CR3 Configuration -----------------------*/
+ /* no CR3 register configuration */
+
+ /*-------------------------- USART BRR Configuration -----------------------*/
+ __HAL_USART_GETCLOCKSOURCE(husart, clocksource);
+ switch (clocksource)
+ {
+ case USART_CLOCKSOURCE_PCLK1:
+ husart->Instance->BRR = (uint16_t)(HAL_RCC_GetPCLK1Freq() / husart->Init.BaudRate);
+ break;
+ case USART_CLOCKSOURCE_HSI:
+ husart->Instance->BRR = (uint16_t)(HSI_VALUE / husart->Init.BaudRate);
+ break;
+ case USART_CLOCKSOURCE_SYSCLK:
+ husart->Instance->BRR = (uint16_t)(HAL_RCC_GetSysClockFreq() / husart->Init.BaudRate);
+ break;
+ case USART_CLOCKSOURCE_LSE:
+ husart->Instance->BRR = (uint16_t)(LSE_VALUE / husart->Init.BaudRate);
+ break;
+ case USART_CLOCKSOURCE_UNDEFINED:
+ default:
+ ret = HAL_ERROR;
+ break;
+ }
+
+ return ret;
+}
+
+/**
+ * @brief Check the USART Idle State
+ * @param husart: USART handle
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef USART_CheckIdleState(USART_HandleTypeDef *husart)
+{
+ /* Initialize the USART ErrorCode */
+ husart->ErrorCode = HAL_USART_ERROR_NONE;
+
+ /* Check if the Transmitter is enabled */
+ if((husart->Instance->CR1 & USART_CR1_TE) == USART_CR1_TE)
+ {
+ /* Wait until TEACK flag is set */
+ if(USART_WaitOnFlagUntilTimeout(husart, USART_ISR_TEACK, RESET, TEACK_REACK_TIMEOUT) != HAL_OK)
+ {
+ husart->State= HAL_USART_STATE_TIMEOUT;
+ return HAL_TIMEOUT;
+ }
+ }
+ /* Check if the Receiver is enabled */
+ if((husart->Instance->CR1 & USART_CR1_RE) == USART_CR1_RE)
+ {
+ /* Wait until REACK flag is set */
+ if(USART_WaitOnFlagUntilTimeout(husart, USART_ISR_REACK, RESET, TEACK_REACK_TIMEOUT) != HAL_OK)
+ {
+ husart->State= HAL_USART_STATE_TIMEOUT;
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Initialize the USART state*/
+ husart->State= HAL_USART_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(husart);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles USART Communication Timeout.
+ * @param husart: USART handle
+ * @param Flag: specifies the USART flag to check.
+ * @param Status: The new Flag status (SET or RESET).
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef USART_WaitOnFlagUntilTimeout(USART_HandleTypeDef *husart, uint32_t Flag, FlagStatus Status, uint32_t Timeout)
+{
+ uint32_t tickstart = HAL_GetTick();
+
+ /* Wait until flag is set */
+ if(Status == RESET)
+ {
+ while(__HAL_USART_GET_FLAG(husart, Flag) == RESET)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0) || ((HAL_GetTick() - tickstart) > Timeout))
+ {
+ /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
+ __HAL_USART_DISABLE_IT(husart, USART_IT_TXE);
+ __HAL_USART_DISABLE_IT(husart, USART_IT_RXNE);
+ __HAL_USART_DISABLE_IT(husart, USART_IT_PE);
+ __HAL_USART_DISABLE_IT(husart, USART_IT_ERR);
+
+ husart->State= HAL_USART_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(husart);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ else
+ {
+ while(__HAL_USART_GET_FLAG(husart, Flag) != RESET)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0) || ((HAL_GetTick() - tickstart) > Timeout))
+ {
+ /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
+ __HAL_USART_DISABLE_IT(husart, USART_IT_TXE);
+ __HAL_USART_DISABLE_IT(husart, USART_IT_RXNE);
+ __HAL_USART_DISABLE_IT(husart, USART_IT_PE);
+ __HAL_USART_DISABLE_IT(husart, USART_IT_ERR);
+
+ husart->State= HAL_USART_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(husart);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+
+/**
+ * @brief DMA USART transmit process complete callback
+ * @param hdma : DMA handle
+ * @retval None
+ */
+static void USART_DMATransmitCplt(DMA_HandleTypeDef *hdma)
+{
+ USART_HandleTypeDef* husart = ( USART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ husart->TxXferCount = 0;
+
+ if(husart->State == HAL_USART_STATE_BUSY_TX)
+ {
+ /* Wait for USART TC Flag */
+ if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TC, RESET, USART_TXDMA_TIMEOUTVALUE) != HAL_OK)
+ {
+ /* Timeout Occured */
+ husart->State = HAL_USART_STATE_TIMEOUT;
+ HAL_USART_ErrorCallback(husart);
+ }
+ else
+ {
+ /* No Timeout */
+ /* Disable the DMA transfer for transmit request by setting the DMAT bit
+ in the USART CR3 register */
+ husart->Instance->CR3 &= ~(USART_CR3_DMAT);
+ husart->State= HAL_USART_STATE_READY;
+ }
+ }
+ /* the usart state is HAL_USART_STATE_BUSY_TX_RX*/
+ else
+ {
+ husart->State= HAL_USART_STATE_BUSY_RX;
+ HAL_USART_TxCpltCallback(husart);
+}
+}
+
+
+/**
+ * @brief DMA USART transmit process half complete callback
+ * @param hdma : DMA handle
+ * @retval None
+ */
+static void USART_DMATxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+ USART_HandleTypeDef* husart = (USART_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ HAL_USART_TxHalfCpltCallback(husart);
+}
+
+/**
+ * @brief DMA USART receive process complete callback
+ * @param hdma : DMA handle
+ * @retval None
+ */
+static void USART_DMAReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+ USART_HandleTypeDef* husart = ( USART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ husart->RxXferCount = 0;
+
+ /* Disable the DMA RX transfer for the receiver request by resetting the DMAR bit
+ in USART CR3 register */
+ husart->Instance->CR3 &= (uint32_t)~((uint32_t)USART_CR3_DMAR);
+ /* similarly, disable the DMA TX transfer that was started to provide the
+ clock to the slave device */
+ husart->Instance->CR3 &= (uint32_t)~((uint32_t)USART_CR3_DMAT);
+
+ husart->State= HAL_USART_STATE_READY;
+
+ HAL_USART_RxCpltCallback(husart);
+}
+
+/**
+ * @brief DMA USART receive process half complete callback
+ * @param hdma : DMA handle
+ * @retval None
+ */
+static void USART_DMARxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+ USART_HandleTypeDef* husart = (USART_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ HAL_USART_RxHalfCpltCallback(husart);
+}
+
+/**
+ * @brief DMA USART communication error callback
+ * @param hdma : DMA handle
+ * @retval None
+ */
+static void USART_DMAError(DMA_HandleTypeDef *hdma)
+{
+ USART_HandleTypeDef* husart = ( USART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ husart->RxXferCount = 0;
+ husart->TxXferCount = 0;
+ husart->ErrorCode |= HAL_USART_ERROR_DMA;
+ husart->State= HAL_USART_STATE_READY;
+
+ HAL_USART_ErrorCallback(husart);
+}
+
+/**
+ * @brief Simplex Send an amount of data in non-blocking mode.
+ * Function called under interruption only, once
+ * interruptions have been enabled by HAL_USART_Transmit_IT()
+ * @param husart: USART handle
+ * @retval HAL status
+ * @note The USART errors are not managed to avoid the overrun error.
+ */
+static HAL_StatusTypeDef USART_Transmit_IT(USART_HandleTypeDef *husart)
+{
+ uint16_t* tmp=0;
+
+ if (husart->State == HAL_USART_STATE_BUSY_TX)
+ {
+
+ if(husart->TxXferCount == 0)
+ {
+ /* Disable the USART Transmit Complete Interrupt */
+ __HAL_USART_DISABLE_IT(husart, USART_IT_TXE);
+
+ /* Enable the USART Transmit Complete Interrupt */
+ __HAL_USART_ENABLE_IT(husart, USART_IT_TC);
+
+ return HAL_OK;
+ }
+ else
+ {
+ if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE))
+ {
+ tmp = (uint16_t*) husart->pTxBuffPtr;
+ husart->Instance->TDR = (*tmp & (uint16_t)0x01FF);
+ husart->pTxBuffPtr += 2;
+ }
+ else
+ {
+ husart->Instance->TDR = (uint8_t)(*husart->pTxBuffPtr++ & (uint8_t)0xFF);
+ }
+
+ husart->TxXferCount--;
+
+ return HAL_OK;
+ }
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+
+/**
+ * @brief Wraps up transmission in non blocking mode.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef USART_EndTransmit_IT(USART_HandleTypeDef *husart)
+{
+ /* Disable the USART Transmit Complete Interrupt */
+ __HAL_USART_DISABLE_IT(husart, USART_IT_TC);
+
+ /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) */
+ __HAL_USART_DISABLE_IT(husart, USART_IT_ERR);
+
+ husart->State = HAL_USART_STATE_READY;
+
+ HAL_USART_TxCpltCallback(husart);
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Simplex Receive an amount of data in non-blocking mode.
+ * Function called under interruption only, once
+ * interruptions have been enabled by HAL_USART_Receive_IT()
+ * @param husart: USART handle
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef USART_Receive_IT(USART_HandleTypeDef *husart)
+{
+ uint16_t* tmp=0;
+ uint16_t uhMask = husart->Mask;
+
+ if(husart->State == HAL_USART_STATE_BUSY_RX)
+ {
+
+ if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE))
+ {
+ tmp = (uint16_t*) husart->pRxBuffPtr ;
+ *tmp = (uint16_t)(husart->Instance->RDR & uhMask);
+ husart->pRxBuffPtr += 2;
+ }
+ else
+ {
+ *husart->pRxBuffPtr++ = (uint8_t)(husart->Instance->RDR & (uint8_t)uhMask);
+ }
+ /* Send dummy byte in order to generate the clock for the Slave to Send the next data */
+ husart->Instance->TDR = (DUMMY_DATA & (uint16_t)0x00FF);
+
+ if(--husart->RxXferCount == 0)
+ {
+ __HAL_USART_DISABLE_IT(husart, USART_IT_RXNE);
+
+ /* Disable the USART Parity Error Interrupt */
+ __HAL_USART_DISABLE_IT(husart, USART_IT_PE);
+
+ /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) */
+ __HAL_USART_DISABLE_IT(husart, USART_IT_ERR);
+
+ husart->State = HAL_USART_STATE_READY;
+
+ HAL_USART_RxCpltCallback(husart);
+
+ return HAL_OK;
+ }
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Full-Duplex Send receive an amount of data in full-duplex mode (non-blocking).
+ * Function called under interruption only, once
+ * interruptions have been enabled by HAL_USART_TransmitReceive_IT()
+ * @param husart: USART handle
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef USART_TransmitReceive_IT(USART_HandleTypeDef *husart)
+{
+ uint16_t* tmp=0;
+ uint16_t uhMask = husart->Mask;
+
+ if(husart->State == HAL_USART_STATE_BUSY_TX_RX)
+ {
+
+ if(husart->TxXferCount != 0x00)
+ {
+ if(__HAL_USART_GET_FLAG(husart, USART_FLAG_TXE) != RESET)
+ {
+ if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE))
+ {
+ tmp = (uint16_t*) husart->pTxBuffPtr;
+ husart->Instance->TDR = (uint16_t)(*tmp & uhMask);
+ husart->pTxBuffPtr += 2;
+ }
+ else
+ {
+ husart->Instance->TDR = (uint8_t)(*husart->pTxBuffPtr++ & (uint8_t)uhMask);
+ }
+ husart->TxXferCount--;
+
+ /* Check the latest data transmitted */
+ if(husart->TxXferCount == 0)
+ {
+ __HAL_USART_DISABLE_IT(husart, USART_IT_TXE);
+ }
+ }
+ }
+
+ if(husart->RxXferCount != 0x00)
+ {
+ if(__HAL_USART_GET_FLAG(husart, USART_FLAG_RXNE) != RESET)
+ {
+ if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE))
+ {
+ tmp = (uint16_t*) husart->pRxBuffPtr ;
+ *tmp = (uint16_t)(husart->Instance->RDR & uhMask);
+ husart->pRxBuffPtr += 2;
+ }
+ else
+ {
+ *husart->pRxBuffPtr++ = (uint8_t)(husart->Instance->RDR & (uint8_t)uhMask);
+ }
+ husart->RxXferCount--;
+ }
+ }
+
+ /* Check the latest data received */
+ if(husart->RxXferCount == 0)
+ {
+ __HAL_USART_DISABLE_IT(husart, USART_IT_RXNE);
+
+ /* Disable the USART Parity Error Interrupt */
+ __HAL_USART_DISABLE_IT(husart, USART_IT_PE);
+
+ /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) */
+ __HAL_USART_DISABLE_IT(husart, USART_IT_ERR);
+
+ husart->State = HAL_USART_STATE_READY;
+
+ HAL_USART_TxRxCpltCallback(husart);
+
+ return HAL_OK;
+ }
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @}
+ */
+
+#endif /* HAL_USART_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/src/stm32f0xx_hal_wwdg.c b/f0/src/stm32f0xx_hal_wwdg.c
new file mode 100755
index 0000000000000000000000000000000000000000..1f8f9c13e5f8be891cbf4c33ac869a76576d9ff5
--- /dev/null
+++ b/f0/src/stm32f0xx_hal_wwdg.c
@@ -0,0 +1,449 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_wwdg.c
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief WWDG HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Window Watchdog (WWDG) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral State functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### WWDG specific features #####
+ ==============================================================================
+ [..]
+ Once enabled the WWDG generates a system reset on expiry of a programmed
+ time period, unless the program refreshes the Counter (T[6;0] downcounter)
+ before reaching 0x3F value (i.e. a reset is generated when the counter
+ value rolls over from 0x40 to 0x3F).
+
+ (+) An MCU reset is also generated if the counter value is refreshed
+ before the counter has reached the refresh window value. This
+ implies that the counter must be refreshed in a limited window.
+ (+) Once enabled the WWDG cannot be disabled except by a system reset.
+ (+) WWDGRST flag in RCC_CSR register can be used to inform when a WWDG
+ reset occurs.
+ (+) The WWDG counter input clock is derived from the APB clock divided
+ by a programmable prescaler.
+ (+) WWDG clock (Hz) = PCLK / (4096 * Prescaler)
+ (+) WWDG timeout (mS) = 1000 * (T[5;0] + 1) / WWDG clock
+ where T[5;0] are the lowest 6 bits of Counter.
+ (+) WWDG Counter refresh is allowed between the following limits :
+ (++) min time (mS) = 1000 * (Counter-Window) / WWDG clock
+ (++) max time (mS) = 1000 * (Counter-0x40) / WWDG clock
+
+ (+) Min-max timeout value @48 MHz(PCLK): ~85,3us / ~5,46 ms
+
+ ##### How to use this driver #####
+ ===============================================================================
+ [..]
+ (+) Enable WWDG APB1 clock using __WWDG_CLK_ENABLE().
+ (+) Set the WWDG prescaler, refresh window and counter value
+ using HAL_WWDG_Init() function.
+ (+) Start the WWDG using HAL_WWDG_Start() function.
+ When the WWDG is enabled the counter value should be configured to
+ a value greater than 0x40 to prevent generating an immediate reset.
+ (+) Optionally you can enable the Early Wakeup Interrupt (EWI) which is
+ generated when the counter reaches 0x40, and then start the WWDG using
+ HAL_WWDG_Start_IT(). At EWI HAL_WWDG_WakeupCallback is executed and user can
+ add his own code by customization of function pointer HAL_WWDG_WakeupCallback
+ Once enabled, EWI interrupt cannot be disabled except by a system reset.
+ (+) Then the application program must refresh the WWDG counter at regular
+ intervals during normal operation to prevent an MCU reset, using
+ HAL_WWDG_Refresh() function. This operation must occur only when
+ the counter is lower than the refresh window value already programmed.
+
+ *** WWDG HAL driver macros list ***
+ ==================================
+ [..]
+ Below the list of most used macros in WWDG HAL driver.
+
+ (+) __HAL_WWDG_ENABLE: Enable the WWDG peripheral
+ (+) __HAL_WWDG_GET_FLAG: Get the selected WWDG's flag status
+ (+) __HAL_WWDG_CLEAR_FLAG: Clear the WWDG's pending flags
+ (+) __HAL_WWDG_ENABLE_IT: Enables the WWDG early wakeup interrupt
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup WWDG WWDG HAL module driver
+ * @brief WWDG HAL module driver.
+ * @{
+ */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup WWDG_Exported_Functions WWDG Exported Functions
+ * @{
+ */
+
+/** @defgroup WWDG_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions.
+ *
+@verbatim
+ ==============================================================================
+ ##### Initialization and de-initialization functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize the WWDG according to the specified parameters
+ in the WWDG_InitTypeDef and create the associated handle
+ (+) DeInitialize the WWDG peripheral
+ (+) Initialize the WWDG MSP
+ (+) DeInitialize the WWDG MSP
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the WWDG according to the specified
+ * parameters in the WWDG_InitTypeDef and creates the associated handle.
+ * @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
+ * the configuration information for the specified WWDG module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_WWDG_Init(WWDG_HandleTypeDef *hwwdg)
+{
+ /* Check the WWDG handle allocation */
+ if(hwwdg == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_WWDG_ALL_INSTANCE(hwwdg->Instance));
+ assert_param(IS_WWDG_PRESCALER(hwwdg->Init.Prescaler));
+ assert_param(IS_WWDG_WINDOW(hwwdg->Init.Window));
+ assert_param(IS_WWDG_COUNTER(hwwdg->Init.Counter));
+
+ if(hwwdg->State == HAL_WWDG_STATE_RESET)
+ {
+ /* Init the low level hardware */
+ HAL_WWDG_MspInit(hwwdg);
+ }
+
+ /* Change WWDG peripheral state */
+ hwwdg->State = HAL_WWDG_STATE_BUSY;
+
+ /* Set WWDG Prescaler and Window */
+ MODIFY_REG(hwwdg->Instance->CFR, (WWDG_CFR_WDGTB | WWDG_CFR_W), (hwwdg->Init.Prescaler | hwwdg->Init.Window));
+
+ /* Set WWDG Counter */
+ MODIFY_REG(hwwdg->Instance->CR, WWDG_CR_T, hwwdg->Init.Counter);
+
+ /* Change WWDG peripheral state */
+ hwwdg->State = HAL_WWDG_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the WWDG peripheral.
+ * @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
+ * the configuration information for the specified WWDG module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_WWDG_DeInit(WWDG_HandleTypeDef *hwwdg)
+{
+ /* Check the parameters */
+ assert_param(IS_WWDG_ALL_INSTANCE(hwwdg->Instance));
+
+ /* Change WWDG peripheral state */
+ hwwdg->State = HAL_WWDG_STATE_BUSY;
+
+ /* DeInit the low level hardware */
+ HAL_WWDG_MspDeInit(hwwdg);
+
+ /* Reset WWDG Control register */
+ hwwdg->Instance->CR = (uint32_t)0x0000007F;
+
+ /* Reset WWDG Configuration register */
+ hwwdg->Instance->CFR = (uint32_t)0x0000007F;
+
+ /* Reset WWDG Status register */
+ hwwdg->Instance->SR = 0;
+
+ /* Change WWDG peripheral state */
+ hwwdg->State = HAL_WWDG_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hwwdg);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the WWDG MSP.
+ * @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
+ * the configuration information for the specified WWDG module.
+ * @retval None
+ */
+__weak void HAL_WWDG_MspInit(WWDG_HandleTypeDef *hwwdg)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_WWDG_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes the WWDG MSP.
+ * @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
+ * the configuration information for the specified WWDG module.
+ * @retval None
+ */
+__weak void HAL_WWDG_MspDeInit(WWDG_HandleTypeDef *hwwdg)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_WWDG_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Exported_Functions_Group2 IO operation functions
+ * @brief IO operation functions
+ *
+@verbatim
+ ==============================================================================
+ ##### IO operation functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Start the WWDG.
+ (+) Refresh the WWDG.
+ (+) Handle WWDG interrupt request.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Starts the WWDG.
+ * @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
+ * the configuration information for the specified WWDG module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_WWDG_Start(WWDG_HandleTypeDef *hwwdg)
+{
+ /* Process Locked */
+ __HAL_LOCK(hwwdg);
+
+ /* Change WWDG peripheral state */
+ hwwdg->State = HAL_WWDG_STATE_BUSY;
+
+ /* Enable the peripheral */
+ __HAL_WWDG_ENABLE(hwwdg);
+
+ /* Change WWDG peripheral state */
+ hwwdg->State = HAL_WWDG_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hwwdg);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the WWDG with interrupt enabled.
+ * @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
+ * the configuration information for the specified WWDG module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_WWDG_Start_IT(WWDG_HandleTypeDef *hwwdg)
+{
+ /* Process Locked */
+ __HAL_LOCK(hwwdg);
+
+ /* Change WWDG peripheral state */
+ hwwdg->State = HAL_WWDG_STATE_BUSY;
+
+ /* Enable the Early Wakeup Interrupt */
+ __HAL_WWDG_ENABLE_IT(hwwdg, WWDG_IT_EWI);
+
+ /* Enable the peripheral */
+ __HAL_WWDG_ENABLE(hwwdg);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Refreshes the WWDG.
+ * @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
+ * the configuration information for the specified WWDG module.
+ * @param Counter: value of counter to put in WWDG counter
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_WWDG_Refresh(WWDG_HandleTypeDef *hwwdg, uint32_t Counter)
+{
+ /* Process Locked */
+ __HAL_LOCK(hwwdg);
+
+ /* Change WWDG peripheral state */
+ hwwdg->State = HAL_WWDG_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_WWDG_COUNTER(Counter));
+
+ /* Write to WWDG CR the WWDG Counter value to refresh with */
+ MODIFY_REG(hwwdg->Instance->CR, (uint32_t)WWDG_CR_T, Counter);
+
+ /* Change WWDG peripheral state */
+ hwwdg->State = HAL_WWDG_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hwwdg);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Handles WWDG interrupt request.
+ * @note The Early Wakeup Interrupt (EWI) can be used if specific safety operations
+ * or data logging must be performed before the actual reset is generated.
+ * The EWI interrupt is enabled when calling HAL_WWDG_Start_IT function.
+ * When the downcounter reaches the value 0x40, and EWI interrupt is
+ * generated and the corresponding Interrupt Service Routine (ISR) can
+ * be used to trigger specific actions (such as communications or data
+ * logging), before resetting the device.
+ * @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
+ * the configuration information for the specified WWDG module.
+ * @retval None
+ */
+void HAL_WWDG_IRQHandler(WWDG_HandleTypeDef *hwwdg)
+{
+ /* Check if Early Wakeup Interrupt is enable */
+ if(__HAL_WWDG_GET_IT_SOURCE(hwwdg, WWDG_IT_EWI) != RESET)
+ {
+ /* Wheck if WWDG Early Wakeup Interrupt occurred */
+ if(__HAL_WWDG_GET_FLAG(hwwdg, WWDG_FLAG_EWIF) != RESET)
+ {
+ /* Early Wakeup callback */
+ HAL_WWDG_WakeupCallback(hwwdg);
+
+ /* Change WWDG peripheral state */
+ hwwdg->State = HAL_WWDG_STATE_READY;
+
+ /* Clear the WWDG Early Wakeup flag */
+ __HAL_WWDG_CLEAR_FLAG(hwwdg, WWDG_FLAG_EWIF);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hwwdg);
+ }
+ }
+}
+
+/**
+ * @brief Early Wakeup WWDG callback.
+ * @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
+ * the configuration information for the specified WWDG module.
+ * @retval None
+ */
+__weak void HAL_WWDG_WakeupCallback(WWDG_HandleTypeDef* hwwdg)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_WWDG_WakeupCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Exported_Functions_Group3 Peripheral State functions
+ * @brief Peripheral State functions.
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral State functions #####
+ ==============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Returns the WWDG state.
+ * @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
+ * the configuration information for the specified WWDG module.
+ * @retval HAL state
+ */
+HAL_WWDG_StateTypeDef HAL_WWDG_GetState(WWDG_HandleTypeDef *hwwdg)
+{
+ return hwwdg->State;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_WWDG_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/f0/startup_code/startup_stm32f030x6.s b/f0/startup_code/startup_stm32f030x6.s
new file mode 100755
index 0000000000000000000000000000000000000000..acb6887b60bdfd1ac1a83b2f3437251e14f84ae2
--- /dev/null
+++ b/f0/startup_code/startup_stm32f030x6.s
@@ -0,0 +1,272 @@
+/**
+ ******************************************************************************
+ * @file startup_stm32f030x6.s
+ * @author MCD Application Team
+ * @version V2.2.1
+ * @date 09-January-2015
+ * @brief STM32F030x4/STM32F030x6 devices vector table for Atollic TrueSTUDIO toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M0 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m0
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+ ldr r0, =_estack
+ mov sp, r0 /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+ movs r1, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r3, =_sidata
+ ldr r3, [r3, r1]
+ str r3, [r0, r1]
+ adds r1, r1, #4
+
+LoopCopyDataInit:
+ ldr r0, =_sdata
+ ldr r3, =_edata
+ adds r2, r0, r1
+ cmp r2, r3
+ bcc CopyDataInit
+ ldr r2, =_sbss
+ b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+ movs r3, #0
+ str r3, [r2]
+ adds r2, r2, #4
+
+
+LoopFillZerobss:
+ ldr r3, = _ebss
+ cmp r2, r3
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+
+LoopForever:
+ b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ *
+ * @param None
+ * @retval : None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word 0
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler /* Window WatchDog */
+ .word 0 /* Reserved */
+ .word RTC_IRQHandler /* RTC through the EXTI line */
+ .word FLASH_IRQHandler /* FLASH */
+ .word RCC_IRQHandler /* RCC */
+ .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
+ .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
+ .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
+ .word 0 /* Reserved */
+ .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
+ .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
+ .word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */
+ .word ADC1_IRQHandler /* ADC1 */
+ .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
+ .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
+ .word 0 /* Reserved */
+ .word TIM3_IRQHandler /* TIM3 */
+ .word 0 /* Reserved */
+ .word 0 /* Reserved */
+ .word TIM14_IRQHandler /* TIM14 */
+ .word 0 /* Reserved */
+ .word TIM16_IRQHandler /* TIM16 */
+ .word TIM17_IRQHandler /* TIM17 */
+ .word I2C1_IRQHandler /* I2C1 */
+ .word 0 /* Reserved */
+ .word SPI1_IRQHandler /* SPI1 */
+ .word 0 /* Reserved */
+ .word USART1_IRQHandler /* USART1 */
+ .word 0 /* Reserved */
+ .word 0 /* Reserved */
+ .word 0 /* Reserved */
+ .word 0 /* Reserved */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_IRQHandler
+ .thumb_set RCC_IRQHandler,Default_Handler
+
+ .weak EXTI0_1_IRQHandler
+ .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+ .weak EXTI2_3_IRQHandler
+ .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+ .weak EXTI4_15_IRQHandler
+ .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_3_IRQHandler
+ .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_5_IRQHandler
+ .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
+
+ .weak ADC1_IRQHandler
+ .thumb_set ADC1_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_UP_TRG_COM_IRQHandler
+ .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM14_IRQHandler
+ .thumb_set TIM14_IRQHandler,Default_Handler
+
+ .weak TIM16_IRQHandler
+ .thumb_set TIM16_IRQHandler,Default_Handler
+
+ .weak TIM17_IRQHandler
+ .thumb_set TIM17_IRQHandler,Default_Handler
+
+ .weak I2C1_IRQHandler
+ .thumb_set I2C1_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/startup_code/startup_stm32f030x8.s b/f0/startup_code/startup_stm32f030x8.s
new file mode 100755
index 0000000000000000000000000000000000000000..509a410b3773f6842e2b231c5f8326c1e99a5b8d
--- /dev/null
+++ b/f0/startup_code/startup_stm32f030x8.s
@@ -0,0 +1,287 @@
+/**
+ ******************************************************************************
+ * @file startup_stm32f030x8.s
+ * @author MCD Application Team
+ * @version V2.2.1
+ * @date 09-January-2015
+ * @brief STM32F030x8 devices vector table for Atollic TrueSTUDIO toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M0 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m0
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+ ldr r0, =_estack
+ mov sp, r0 /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+ movs r1, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r3, =_sidata
+ ldr r3, [r3, r1]
+ str r3, [r0, r1]
+ adds r1, r1, #4
+
+LoopCopyDataInit:
+ ldr r0, =_sdata
+ ldr r3, =_edata
+ adds r2, r0, r1
+ cmp r2, r3
+ bcc CopyDataInit
+ ldr r2, =_sbss
+ b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+ movs r3, #0
+ str r3, [r2]
+ adds r2, r2, #4
+
+
+LoopFillZerobss:
+ ldr r3, = _ebss
+ cmp r2, r3
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+
+LoopForever:
+ b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ *
+ * @param None
+ * @retval : None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word 0
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler /* Window WatchDog */
+ .word 0 /* Reserved */
+ .word RTC_IRQHandler /* RTC through the EXTI line */
+ .word FLASH_IRQHandler /* FLASH */
+ .word RCC_IRQHandler /* RCC */
+ .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
+ .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
+ .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
+ .word 0 /* Reserved */
+ .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
+ .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
+ .word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */
+ .word ADC1_IRQHandler /* ADC1 */
+ .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
+ .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
+ .word 0 /* Reserved */
+ .word TIM3_IRQHandler /* TIM3 */
+ .word TIM6_IRQHandler /* TIM6 */
+ .word 0 /* Reserved */
+ .word TIM14_IRQHandler /* TIM14 */
+ .word TIM15_IRQHandler /* TIM15 */
+ .word TIM16_IRQHandler /* TIM16 */
+ .word TIM17_IRQHandler /* TIM17 */
+ .word I2C1_IRQHandler /* I2C1 */
+ .word I2C2_IRQHandler /* I2C2 */
+ .word SPI1_IRQHandler /* SPI1 */
+ .word SPI2_IRQHandler /* SPI2 */
+ .word USART1_IRQHandler /* USART1 */
+ .word USART2_IRQHandler /* USART2 */
+ .word 0 /* Reserved */
+ .word 0 /* Reserved */
+ .word 0 /* Reserved */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_IRQHandler
+ .thumb_set RCC_IRQHandler,Default_Handler
+
+ .weak EXTI0_1_IRQHandler
+ .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+ .weak EXTI2_3_IRQHandler
+ .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+ .weak EXTI4_15_IRQHandler
+ .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_3_IRQHandler
+ .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_5_IRQHandler
+ .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
+
+ .weak ADC1_IRQHandler
+ .thumb_set ADC1_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_UP_TRG_COM_IRQHandler
+ .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM6_IRQHandler
+ .thumb_set TIM6_IRQHandler,Default_Handler
+
+ .weak TIM14_IRQHandler
+ .thumb_set TIM14_IRQHandler,Default_Handler
+
+ .weak TIM15_IRQHandler
+ .thumb_set TIM15_IRQHandler,Default_Handler
+
+ .weak TIM16_IRQHandler
+ .thumb_set TIM16_IRQHandler,Default_Handler
+
+ .weak TIM17_IRQHandler
+ .thumb_set TIM17_IRQHandler,Default_Handler
+
+ .weak I2C1_IRQHandler
+ .thumb_set I2C1_IRQHandler,Default_Handler
+
+ .weak I2C2_IRQHandler
+ .thumb_set I2C2_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak SPI2_IRQHandler
+ .thumb_set SPI2_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/startup_code/startup_stm32f030xc.s b/f0/startup_code/startup_stm32f030xc.s
new file mode 100755
index 0000000000000000000000000000000000000000..595e04b8de9f4c05511b66e99145aee8faa04d28
--- /dev/null
+++ b/f0/startup_code/startup_stm32f030xc.s
@@ -0,0 +1,292 @@
+/**
+ ******************************************************************************
+ * @file startup_stm32f030xc.s
+ * @author MCD Application Team
+ * @version V2.2.1
+ * @date 09-January-2015
+ * @brief STM32F030xc/STM32F030xb devices vector table for Atollic TrueSTUDIO toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M0 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m0
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+ ldr r0, =_estack
+ mov sp, r0 /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+ movs r1, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r3, =_sidata
+ ldr r3, [r3, r1]
+ str r3, [r0, r1]
+ adds r1, r1, #4
+
+LoopCopyDataInit:
+ ldr r0, =_sdata
+ ldr r3, =_edata
+ adds r2, r0, r1
+ cmp r2, r3
+ bcc CopyDataInit
+ ldr r2, =_sbss
+ b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+ movs r3, #0
+ str r3, [r2]
+ adds r2, r2, #4
+
+
+LoopFillZerobss:
+ ldr r3, = _ebss
+ cmp r2, r3
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+
+LoopForever:
+ b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ *
+ * @param None
+ * @retval : None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word 0
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler /* Window WatchDog */
+ .word 0 /* Reserved */
+ .word RTC_IRQHandler /* RTC through the EXTI line */
+ .word FLASH_IRQHandler /* FLASH */
+ .word RCC_IRQHandler /* RCC */
+ .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
+ .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
+ .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
+ .word 0 /* Reserved */
+ .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
+ .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
+ .word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */
+ .word ADC1_IRQHandler /* ADC1 */
+ .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
+ .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
+ .word 0 /* Reserved */
+ .word TIM3_IRQHandler /* TIM3 */
+ .word TIM6_IRQHandler /* TIM6 */
+ .word TIM7_IRQHandler /* TIM7 */
+ .word TIM14_IRQHandler /* TIM14 */
+ .word TIM15_IRQHandler /* TIM15 */
+ .word TIM16_IRQHandler /* TIM16 */
+ .word TIM17_IRQHandler /* TIM17 */
+ .word I2C1_IRQHandler /* I2C1 */
+ .word I2C2_IRQHandler /* I2C2 */
+ .word SPI1_IRQHandler /* SPI1 */
+ .word SPI2_IRQHandler /* SPI2 */
+ .word USART1_IRQHandler /* USART1 */
+ .word USART2_IRQHandler /* USART2 */
+ .word USART3_6_IRQHandler /* USART3, USART4, USART5, USART6 */
+ .word 0 /* Reserved */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_IRQHandler
+ .thumb_set RCC_IRQHandler,Default_Handler
+
+ .weak EXTI0_1_IRQHandler
+ .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+ .weak EXTI2_3_IRQHandler
+ .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+ .weak EXTI4_15_IRQHandler
+ .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_3_IRQHandler
+ .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_5_IRQHandler
+ .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
+
+ .weak ADC1_IRQHandler
+ .thumb_set ADC1_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_UP_TRG_COM_IRQHandler
+ .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM6_IRQHandler
+ .thumb_set TIM6_IRQHandler,Default_Handler
+
+ .weak TIM7_IRQHandler
+ .thumb_set TIM7_IRQHandler,Default_Handler
+
+ .weak TIM14_IRQHandler
+ .thumb_set TIM14_IRQHandler,Default_Handler
+
+ .weak TIM15_IRQHandler
+ .thumb_set TIM15_IRQHandler,Default_Handler
+
+ .weak TIM16_IRQHandler
+ .thumb_set TIM16_IRQHandler,Default_Handler
+
+ .weak TIM17_IRQHandler
+ .thumb_set TIM17_IRQHandler,Default_Handler
+
+ .weak I2C1_IRQHandler
+ .thumb_set I2C1_IRQHandler,Default_Handler
+
+ .weak I2C2_IRQHandler
+ .thumb_set I2C2_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak SPI2_IRQHandler
+ .thumb_set SPI2_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak USART3_6_IRQHandler
+ .thumb_set USART3_6_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/startup_code/startup_stm32f031x6.s b/f0/startup_code/startup_stm32f031x6.s
new file mode 100755
index 0000000000000000000000000000000000000000..ec66e9acf668cb16f73dd9e33143d9b7ecb38179
--- /dev/null
+++ b/f0/startup_code/startup_stm32f031x6.s
@@ -0,0 +1,278 @@
+/**
+ ******************************************************************************
+ * @file startup_stm32f031x6.s
+ * @author MCD Application Team
+ * @version V2.2.1
+ * @date 09-January-2015
+ * @brief STM32F031x4/STM32F031x6 devices vector table for Atollic TrueSTUDIO toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M0 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m0
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+ ldr r0, =_estack
+ mov sp, r0 /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+ movs r1, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r3, =_sidata
+ ldr r3, [r3, r1]
+ str r3, [r0, r1]
+ adds r1, r1, #4
+
+LoopCopyDataInit:
+ ldr r0, =_sdata
+ ldr r3, =_edata
+ adds r2, r0, r1
+ cmp r2, r3
+ bcc CopyDataInit
+ ldr r2, =_sbss
+ b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+ movs r3, #0
+ str r3, [r2]
+ adds r2, r2, #4
+
+
+LoopFillZerobss:
+ ldr r3, = _ebss
+ cmp r2, r3
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+
+LoopForever:
+ b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ *
+ * @param None
+ * @retval : None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word 0
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler /* Window WatchDog */
+ .word PVD_IRQHandler /* PVD through EXTI Line detect */
+ .word RTC_IRQHandler /* RTC through the EXTI line */
+ .word FLASH_IRQHandler /* FLASH */
+ .word RCC_IRQHandler /* RCC */
+ .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
+ .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
+ .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
+ .word 0 /* Reserved */
+ .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
+ .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
+ .word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */
+ .word ADC1_IRQHandler /* ADC1 */
+ .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
+ .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
+ .word TIM2_IRQHandler /* TIM2 */
+ .word TIM3_IRQHandler /* TIM3 */
+ .word 0 /* Reserved */
+ .word 0 /* Reserved */
+ .word TIM14_IRQHandler /* TIM14 */
+ .word 0 /* Reserved */
+ .word TIM16_IRQHandler /* TIM16 */
+ .word TIM17_IRQHandler /* TIM17 */
+ .word I2C1_IRQHandler /* I2C1 */
+ .word 0 /* Reserved */
+ .word SPI1_IRQHandler /* SPI1 */
+ .word 0 /* Reserved */
+ .word USART1_IRQHandler /* USART1 */
+ .word 0 /* Reserved */
+ .word 0 /* Reserved */
+ .word 0 /* Reserved */
+ .word 0 /* Reserved */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak PVD_IRQHandler
+ .thumb_set PVD_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_IRQHandler
+ .thumb_set RCC_IRQHandler,Default_Handler
+
+ .weak EXTI0_1_IRQHandler
+ .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+ .weak EXTI2_3_IRQHandler
+ .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+ .weak EXTI4_15_IRQHandler
+ .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_3_IRQHandler
+ .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_5_IRQHandler
+ .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
+
+ .weak ADC1_IRQHandler
+ .thumb_set ADC1_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_UP_TRG_COM_IRQHandler
+ .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM14_IRQHandler
+ .thumb_set TIM14_IRQHandler,Default_Handler
+
+ .weak TIM16_IRQHandler
+ .thumb_set TIM16_IRQHandler,Default_Handler
+
+ .weak TIM17_IRQHandler
+ .thumb_set TIM17_IRQHandler,Default_Handler
+
+ .weak I2C1_IRQHandler
+ .thumb_set I2C1_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/startup_code/startup_stm32f038xx.s b/f0/startup_code/startup_stm32f038xx.s
new file mode 100755
index 0000000000000000000000000000000000000000..ad609eca04e12ae0a09398cf997a74ec1fe0a5a2
--- /dev/null
+++ b/f0/startup_code/startup_stm32f038xx.s
@@ -0,0 +1,275 @@
+/**
+ ******************************************************************************
+ * @file startup_stm32f038xx.s
+ * @author MCD Application Team
+ * @version V2.2.1
+ * @date 09-January-2015
+ * @brief STM32F038xx devices vector table for Atollic TrueSTUDIO toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M0 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m0
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+ ldr r0, =_estack
+ mov sp, r0 /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+ movs r1, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r3, =_sidata
+ ldr r3, [r3, r1]
+ str r3, [r0, r1]
+ adds r1, r1, #4
+
+LoopCopyDataInit:
+ ldr r0, =_sdata
+ ldr r3, =_edata
+ adds r2, r0, r1
+ cmp r2, r3
+ bcc CopyDataInit
+ ldr r2, =_sbss
+ b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+ movs r3, #0
+ str r3, [r2]
+ adds r2, r2, #4
+
+
+LoopFillZerobss:
+ ldr r3, = _ebss
+ cmp r2, r3
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+
+LoopForever:
+ b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ *
+ * @param None
+ * @retval : None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word 0
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler /* Window WatchDog */
+ .word 0 /* Reserved */
+ .word RTC_IRQHandler /* RTC through the EXTI line */
+ .word FLASH_IRQHandler /* FLASH */
+ .word RCC_IRQHandler /* RCC */
+ .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
+ .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
+ .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
+ .word 0 /* Reserved */
+ .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
+ .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
+ .word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */
+ .word ADC1_IRQHandler /* ADC1 */
+ .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
+ .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
+ .word TIM2_IRQHandler /* TIM2 */
+ .word TIM3_IRQHandler /* TIM3 */
+ .word 0 /* Reserved */
+ .word 0 /* Reserved */
+ .word TIM14_IRQHandler /* TIM14 */
+ .word 0 /* Reserved */
+ .word TIM16_IRQHandler /* TIM16 */
+ .word TIM17_IRQHandler /* TIM17 */
+ .word I2C1_IRQHandler /* I2C1 */
+ .word 0 /* Reserved */
+ .word SPI1_IRQHandler /* SPI1 */
+ .word 0 /* Reserved */
+ .word USART1_IRQHandler /* USART1 */
+ .word 0 /* Reserved */
+ .word 0 /* Reserved */
+ .word 0 /* Reserved */
+ .word 0 /* Reserved */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_IRQHandler
+ .thumb_set RCC_IRQHandler,Default_Handler
+
+ .weak EXTI0_1_IRQHandler
+ .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+ .weak EXTI2_3_IRQHandler
+ .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+ .weak EXTI4_15_IRQHandler
+ .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_3_IRQHandler
+ .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_5_IRQHandler
+ .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
+
+ .weak ADC1_IRQHandler
+ .thumb_set ADC1_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_UP_TRG_COM_IRQHandler
+ .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM14_IRQHandler
+ .thumb_set TIM14_IRQHandler,Default_Handler
+
+ .weak TIM16_IRQHandler
+ .thumb_set TIM16_IRQHandler,Default_Handler
+
+ .weak TIM17_IRQHandler
+ .thumb_set TIM17_IRQHandler,Default_Handler
+
+ .weak I2C1_IRQHandler
+ .thumb_set I2C1_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/startup_code/startup_stm32f042x6.s b/f0/startup_code/startup_stm32f042x6.s
new file mode 100755
index 0000000000000000000000000000000000000000..9d653155dd86984503a3dd5269a07034b1456c0d
--- /dev/null
+++ b/f0/startup_code/startup_stm32f042x6.s
@@ -0,0 +1,323 @@
+/**
+ ******************************************************************************
+ * @file startup_stm32f042x6.s
+ * @author MCD Application Team
+ * @version V2.2.1
+ * @date 09-January-2015
+ * @brief STM32F042x4/STM32F042x6 devices vector table for Atollic TrueSTUDIO toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M0 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m0
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+/**
+ * @brief This is the code that gets called when the processor first
+ * starts execution following a reset event. Only the absolutely
+ * necessary set is performed, after which the application
+ * supplied main() routine is called.
+ * @param None
+ * @retval : None
+*/
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+ ldr r0, =_estack
+ mov sp, r0 /* set stack pointer */
+
+/*Check if boot space corresponds to test memory*/
+
+ LDR R0,=0x00000004
+ LDR R1, [R0]
+ LSRS R1, R1, #24
+ LDR R2,=0x1F
+ CMP R1, R2
+ BNE ApplicationStart
+
+ /*SYSCFG clock enable*/
+
+ LDR R0,=0x40021018
+ LDR R1,=0x00000001
+ STR R1, [R0]
+
+/*Set CFGR1 register with flash memory remap at address 0*/
+ LDR R0,=0x40010000
+ LDR R1,=0x00000000
+ STR R1, [R0]
+
+ApplicationStart:
+/* Copy the data segment initializers from flash to SRAM */
+ movs r1, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r3, =_sidata
+ ldr r3, [r3, r1]
+ str r3, [r0, r1]
+ adds r1, r1, #4
+
+LoopCopyDataInit:
+ ldr r0, =_sdata
+ ldr r3, =_edata
+ adds r2, r0, r1
+ cmp r2, r3
+ bcc CopyDataInit
+ ldr r2, =_sbss
+ b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+ movs r3, #0
+ str r3, [r2]
+ adds r2, r2, #4
+
+
+LoopFillZerobss:
+ ldr r3, = _ebss
+ cmp r2, r3
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+
+LoopForever:
+ b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ *
+ * @param None
+ * @retval : None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word 0
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler /* Window WatchDog */
+ .word PVD_VDDIO2_IRQHandler /* PVD and VDDIO2 through EXTI Line detect */
+ .word RTC_IRQHandler /* RTC through the EXTI line */
+ .word FLASH_IRQHandler /* FLASH */
+ .word RCC_CRS_IRQHandler /* RCC and CRS */
+ .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
+ .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
+ .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
+ .word TSC_IRQHandler /* TSC */
+ .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
+ .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
+ .word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */
+ .word ADC1_IRQHandler /* ADC1 */
+ .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
+ .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
+ .word TIM2_IRQHandler /* TIM2 */
+ .word TIM3_IRQHandler /* TIM3 */
+ .word 0 /* Reserved */
+ .word 0 /* Reserved */
+ .word TIM14_IRQHandler /* TIM14 */
+ .word 0 /* Reserved */
+ .word TIM16_IRQHandler /* TIM16 */
+ .word TIM17_IRQHandler /* TIM17 */
+ .word I2C1_IRQHandler /* I2C1 */
+ .word 0 /* Reserved */
+ .word SPI1_IRQHandler /* SPI1 */
+ .word SPI2_IRQHandler /* SPI2 */
+ .word USART1_IRQHandler /* USART1 */
+ .word USART2_IRQHandler /* USART2 */
+ .word 0 /* Reserved */
+ .word CEC_CAN_IRQHandler /* CEC and CAN */
+ .word USB_IRQHandler /* USB */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak PVD_VDDIO2_IRQHandler
+ .thumb_set PVD_VDDIO2_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_CRS_IRQHandler
+ .thumb_set RCC_CRS_IRQHandler,Default_Handler
+
+ .weak EXTI0_1_IRQHandler
+ .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+ .weak EXTI2_3_IRQHandler
+ .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+ .weak EXTI4_15_IRQHandler
+ .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+ .weak TSC_IRQHandler
+ .thumb_set TSC_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_3_IRQHandler
+ .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_5_IRQHandler
+ .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
+
+ .weak ADC1_IRQHandler
+ .thumb_set ADC1_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_UP_TRG_COM_IRQHandler
+ .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM14_IRQHandler
+ .thumb_set TIM14_IRQHandler,Default_Handler
+
+ .weak TIM16_IRQHandler
+ .thumb_set TIM16_IRQHandler,Default_Handler
+
+ .weak TIM17_IRQHandler
+ .thumb_set TIM17_IRQHandler,Default_Handler
+
+ .weak I2C1_IRQHandler
+ .thumb_set I2C1_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak SPI2_IRQHandler
+ .thumb_set SPI2_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak CEC_CAN_IRQHandler
+ .thumb_set CEC_CAN_IRQHandler,Default_Handler
+
+ .weak USB_IRQHandler
+ .thumb_set USB_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/startup_code/startup_stm32f048xx.s b/f0/startup_code/startup_stm32f048xx.s
new file mode 100755
index 0000000000000000000000000000000000000000..3211fc7d0ac450bfd2123dd0d57233f05dfabb65
--- /dev/null
+++ b/f0/startup_code/startup_stm32f048xx.s
@@ -0,0 +1,293 @@
+/**
+ ******************************************************************************
+ * @file startup_stm32f048xx.s
+ * @author MCD Application Team
+ * @version V2.2.1
+ * @date 09-January-2015
+ * @brief STM32F048xx devices vector table for Atollic TrueSTUDIO toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M0 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m0
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+ ldr r0, =_estack
+ mov sp, r0 /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+ movs r1, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r3, =_sidata
+ ldr r3, [r3, r1]
+ str r3, [r0, r1]
+ adds r1, r1, #4
+
+LoopCopyDataInit:
+ ldr r0, =_sdata
+ ldr r3, =_edata
+ adds r2, r0, r1
+ cmp r2, r3
+ bcc CopyDataInit
+ ldr r2, =_sbss
+ b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+ movs r3, #0
+ str r3, [r2]
+ adds r2, r2, #4
+
+
+LoopFillZerobss:
+ ldr r3, = _ebss
+ cmp r2, r3
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+
+LoopForever:
+ b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ *
+ * @param None
+ * @retval : None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word 0
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler /* Window WatchDog */
+ .word VDDIO2_IRQHandler /* VDDIO2 Monitor through EXTI Line 31 */
+ .word RTC_IRQHandler /* RTC through the EXTI line */
+ .word FLASH_IRQHandler /* FLASH */
+ .word RCC_CRS_IRQHandler /* RCC and CRS */
+ .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
+ .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
+ .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
+ .word TSC_IRQHandler /* TSC */
+ .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
+ .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
+ .word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */
+ .word ADC1_IRQHandler /* ADC1 */
+ .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
+ .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
+ .word TIM2_IRQHandler /* TIM2 */
+ .word TIM3_IRQHandler /* TIM3 */
+ .word 0 /* Reserved */
+ .word 0 /* Reserved */
+ .word TIM14_IRQHandler /* TIM14 */
+ .word 0 /* Reserved */
+ .word TIM16_IRQHandler /* TIM16 */
+ .word TIM17_IRQHandler /* TIM17 */
+ .word I2C1_IRQHandler /* I2C1 */
+ .word 0 /* Reserved */
+ .word SPI1_IRQHandler /* SPI1 */
+ .word SPI2_IRQHandler /* SPI2 */
+ .word USART1_IRQHandler /* USART1 */
+ .word USART2_IRQHandler /* USART2 */
+ .word 0 /* Reserved */
+ .word CEC_CAN_IRQHandler /* CEC and CAN */
+ .word USB_IRQHandler /* USB */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak VDDIO2_IRQHandler
+ .thumb_set VDDIO2_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_CRS_IRQHandler
+ .thumb_set RCC_CRS_IRQHandler,Default_Handler
+
+ .weak EXTI0_1_IRQHandler
+ .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+ .weak EXTI2_3_IRQHandler
+ .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+ .weak EXTI4_15_IRQHandler
+ .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+ .weak TSC_IRQHandler
+ .thumb_set TSC_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_3_IRQHandler
+ .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_5_IRQHandler
+ .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
+
+ .weak ADC1_IRQHandler
+ .thumb_set ADC1_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_UP_TRG_COM_IRQHandler
+ .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM14_IRQHandler
+ .thumb_set TIM14_IRQHandler,Default_Handler
+
+ .weak TIM16_IRQHandler
+ .thumb_set TIM16_IRQHandler,Default_Handler
+
+ .weak TIM17_IRQHandler
+ .thumb_set TIM17_IRQHandler,Default_Handler
+
+ .weak I2C1_IRQHandler
+ .thumb_set I2C1_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak SPI2_IRQHandler
+ .thumb_set SPI2_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak CEC_CAN_IRQHandler
+ .thumb_set CEC_CAN_IRQHandler,Default_Handler
+
+ .weak USB_IRQHandler
+ .thumb_set USB_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/startup_code/startup_stm32f051x8.s b/f0/startup_code/startup_stm32f051x8.s
new file mode 100755
index 0000000000000000000000000000000000000000..f90243ff8a0e2e595e255aff9270742736073940
--- /dev/null
+++ b/f0/startup_code/startup_stm32f051x8.s
@@ -0,0 +1,299 @@
+/**
+ ******************************************************************************
+ * @file startup_stm32f051x8.s
+ * @author MCD Application Team
+ * @version V2.2.1
+ * @date 09-January-2015
+ * @brief STM32F051x4/STM32F051x6/STM32F051x8 devices vector table for Atollic TrueSTUDIO toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M0 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m0
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+ ldr r0, =_estack
+ mov sp, r0 /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+ movs r1, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r3, =_sidata
+ ldr r3, [r3, r1]
+ str r3, [r0, r1]
+ adds r1, r1, #4
+
+LoopCopyDataInit:
+ ldr r0, =_sdata
+ ldr r3, =_edata
+ adds r2, r0, r1
+ cmp r2, r3
+ bcc CopyDataInit
+ ldr r2, =_sbss
+ b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+ movs r3, #0
+ str r3, [r2]
+ adds r2, r2, #4
+
+
+LoopFillZerobss:
+ ldr r3, = _ebss
+ cmp r2, r3
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+
+LoopForever:
+ b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ *
+ * @param None
+ * @retval : None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word 0
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler /* Window WatchDog */
+ .word PVD_IRQHandler /* PVD through EXTI Line detect */
+ .word RTC_IRQHandler /* RTC through the EXTI line */
+ .word FLASH_IRQHandler /* FLASH */
+ .word RCC_CRS_IRQHandler /* RCC and CRS */
+ .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
+ .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
+ .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
+ .word TSC_IRQHandler /* TSC */
+ .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
+ .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
+ .word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */
+ .word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
+ .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
+ .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
+ .word TIM2_IRQHandler /* TIM2 */
+ .word TIM3_IRQHandler /* TIM3 */
+ .word TIM6_DAC_IRQHandler /* TIM6 and DAC */
+ .word 0 /* Reserved */
+ .word TIM14_IRQHandler /* TIM14 */
+ .word TIM15_IRQHandler /* TIM15 */
+ .word TIM16_IRQHandler /* TIM16 */
+ .word TIM17_IRQHandler /* TIM17 */
+ .word I2C1_IRQHandler /* I2C1 */
+ .word I2C2_IRQHandler /* I2C2 */
+ .word SPI1_IRQHandler /* SPI1 */
+ .word SPI2_IRQHandler /* SPI2 */
+ .word USART1_IRQHandler /* USART1 */
+ .word USART2_IRQHandler /* USART2 */
+ .word 0 /* Reserved */
+ .word CEC_CAN_IRQHandler /* CEC and CAN */
+ .word 0 /* Reserved */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak PVD_IRQHandler
+ .thumb_set PVD_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_CRS_IRQHandler
+ .thumb_set RCC_CRS_IRQHandler,Default_Handler
+
+ .weak EXTI0_1_IRQHandler
+ .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+ .weak EXTI2_3_IRQHandler
+ .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+ .weak EXTI4_15_IRQHandler
+ .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+ .weak TSC_IRQHandler
+ .thumb_set TSC_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_3_IRQHandler
+ .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_5_IRQHandler
+ .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
+
+ .weak ADC1_COMP_IRQHandler
+ .thumb_set ADC1_COMP_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_UP_TRG_COM_IRQHandler
+ .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM6_DAC_IRQHandler
+ .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+ .weak TIM14_IRQHandler
+ .thumb_set TIM14_IRQHandler,Default_Handler
+
+ .weak TIM15_IRQHandler
+ .thumb_set TIM15_IRQHandler,Default_Handler
+
+ .weak TIM16_IRQHandler
+ .thumb_set TIM16_IRQHandler,Default_Handler
+
+ .weak TIM17_IRQHandler
+ .thumb_set TIM17_IRQHandler,Default_Handler
+
+ .weak I2C1_IRQHandler
+ .thumb_set I2C1_IRQHandler,Default_Handler
+
+ .weak I2C2_IRQHandler
+ .thumb_set I2C2_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak SPI2_IRQHandler
+ .thumb_set SPI2_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak CEC_CAN_IRQHandler
+ .thumb_set CEC_CAN_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/startup_code/startup_stm32f058xx.s b/f0/startup_code/startup_stm32f058xx.s
new file mode 100755
index 0000000000000000000000000000000000000000..fd080e96d881ace92ba7d2b933f61e6d4c92dafa
--- /dev/null
+++ b/f0/startup_code/startup_stm32f058xx.s
@@ -0,0 +1,296 @@
+/**
+ ******************************************************************************
+ * @file startup_stm32f058xx.s
+ * @author MCD Application Team
+ * @version V2.2.1
+ * @date 09-January-2015
+ * @brief STM32F058xx devices vector table for Atollic TrueSTUDIO toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M0 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m0
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+ ldr r0, =_estack
+ mov sp, r0 /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+ movs r1, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r3, =_sidata
+ ldr r3, [r3, r1]
+ str r3, [r0, r1]
+ adds r1, r1, #4
+
+LoopCopyDataInit:
+ ldr r0, =_sdata
+ ldr r3, =_edata
+ adds r2, r0, r1
+ cmp r2, r3
+ bcc CopyDataInit
+ ldr r2, =_sbss
+ b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+ movs r3, #0
+ str r3, [r2]
+ adds r2, r2, #4
+
+
+LoopFillZerobss:
+ ldr r3, = _ebss
+ cmp r2, r3
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+
+LoopForever:
+ b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ *
+ * @param None
+ * @retval : None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word 0
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler /* Window WatchDog */
+ .word 0 /* Reserved */
+ .word RTC_IRQHandler /* RTC through the EXTI line */
+ .word FLASH_IRQHandler /* FLASH */
+ .word RCC_CRS_IRQHandler /* RCC and CRS */
+ .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
+ .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
+ .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
+ .word TSC_IRQHandler /* TSC */
+ .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
+ .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
+ .word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */
+ .word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
+ .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
+ .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
+ .word TIM2_IRQHandler /* TIM2 */
+ .word TIM3_IRQHandler /* TIM3 */
+ .word TIM6_DAC_IRQHandler /* TIM6 and DAC */
+ .word 0 /* Reserved */
+ .word TIM14_IRQHandler /* TIM14 */
+ .word TIM15_IRQHandler /* TIM15 */
+ .word TIM16_IRQHandler /* TIM16 */
+ .word TIM17_IRQHandler /* TIM17 */
+ .word I2C1_IRQHandler /* I2C1 */
+ .word I2C2_IRQHandler /* I2C2 */
+ .word SPI1_IRQHandler /* SPI1 */
+ .word SPI2_IRQHandler /* SPI2 */
+ .word USART1_IRQHandler /* USART1 */
+ .word USART2_IRQHandler /* USART2 */
+ .word 0 /* Reserved */
+ .word CEC_CAN_IRQHandler /* CEC and CAN */
+ .word 0 /* Reserved */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_CRS_IRQHandler
+ .thumb_set RCC_CRS_IRQHandler,Default_Handler
+
+ .weak EXTI0_1_IRQHandler
+ .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+ .weak EXTI2_3_IRQHandler
+ .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+ .weak EXTI4_15_IRQHandler
+ .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+ .weak TSC_IRQHandler
+ .thumb_set TSC_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_3_IRQHandler
+ .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_5_IRQHandler
+ .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
+
+ .weak ADC1_COMP_IRQHandler
+ .thumb_set ADC1_COMP_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_UP_TRG_COM_IRQHandler
+ .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM6_DAC_IRQHandler
+ .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+ .weak TIM14_IRQHandler
+ .thumb_set TIM14_IRQHandler,Default_Handler
+
+ .weak TIM15_IRQHandler
+ .thumb_set TIM15_IRQHandler,Default_Handler
+
+ .weak TIM16_IRQHandler
+ .thumb_set TIM16_IRQHandler,Default_Handler
+
+ .weak TIM17_IRQHandler
+ .thumb_set TIM17_IRQHandler,Default_Handler
+
+ .weak I2C1_IRQHandler
+ .thumb_set I2C1_IRQHandler,Default_Handler
+
+ .weak I2C2_IRQHandler
+ .thumb_set I2C2_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak SPI2_IRQHandler
+ .thumb_set SPI2_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak CEC_CAN_IRQHandler
+ .thumb_set CEC_CAN_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/startup_code/startup_stm32f070x6.s b/f0/startup_code/startup_stm32f070x6.s
new file mode 100755
index 0000000000000000000000000000000000000000..5b6fc22ee6d2f34142ab073d61a18b2e90142dd3
--- /dev/null
+++ b/f0/startup_code/startup_stm32f070x6.s
@@ -0,0 +1,308 @@
+/**
+ ******************************************************************************
+ * @file startup_stm32f070x6.s
+ * @author MCD Application Team
+ * @version V2.2.1
+ * @date 09-January-2015
+ * @brief STM32F070x4/STM32F070x6 devices vector table for Atollic TrueSTUDIO toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M0 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m0
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+/**
+ * @brief This is the code that gets called when the processor first
+ * starts execution following a reset event. Only the absolutely
+ * necessary set is performed, after which the application
+ * supplied main() routine is called.
+ * @param None
+ * @retval : None
+*/
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+ ldr r0, =_estack
+ mov sp, r0 /* set stack pointer */
+
+/*Check if boot space corresponds to test memory*/
+
+ LDR R0,=0x00000004
+ LDR R1, [R0]
+ LSRS R1, R1, #24
+ LDR R2,=0x1F
+ CMP R1, R2
+ BNE ApplicationStart
+
+ /*SYSCFG clock enable*/
+
+ LDR R0,=0x40021018
+ LDR R1,=0x00000001
+ STR R1, [R0]
+
+/*Set CFGR1 register with flash memory remap at address 0*/
+ LDR R0,=0x40010000
+ LDR R1,=0x00000000
+ STR R1, [R0]
+
+ApplicationStart:
+/* Copy the data segment initializers from flash to SRAM */
+ movs r1, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r3, =_sidata
+ ldr r3, [r3, r1]
+ str r3, [r0, r1]
+ adds r1, r1, #4
+
+LoopCopyDataInit:
+ ldr r0, =_sdata
+ ldr r3, =_edata
+ adds r2, r0, r1
+ cmp r2, r3
+ bcc CopyDataInit
+ ldr r2, =_sbss
+ b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+ movs r3, #0
+ str r3, [r2]
+ adds r2, r2, #4
+
+
+LoopFillZerobss:
+ ldr r3, = _ebss
+ cmp r2, r3
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+
+LoopForever:
+ b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ *
+ * @param None
+ * @retval : None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word 0
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler /* Window WatchDog */
+ .word 0 /* Reserved */
+ .word RTC_IRQHandler /* RTC through the EXTI line */
+ .word FLASH_IRQHandler /* FLASH */
+ .word RCC_IRQHandler /* RCC */
+ .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
+ .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
+ .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
+ .word 0 /* Reserved */
+ .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
+ .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
+ .word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */
+ .word ADC1_IRQHandler /* ADC1 */
+ .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
+ .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
+ .word 0 /* Reserved */
+ .word TIM3_IRQHandler /* TIM3 */
+ .word 0 /* Reserved */
+ .word 0 /* Reserved */
+ .word TIM14_IRQHandler /* TIM14 */
+ .word 0 /* Reserved */
+ .word TIM16_IRQHandler /* TIM16 */
+ .word TIM17_IRQHandler /* TIM17 */
+ .word I2C1_IRQHandler /* I2C1 */
+ .word 0 /* Reserved */
+ .word SPI1_IRQHandler /* SPI1 */
+ .word 0 /* Reserved */
+ .word USART1_IRQHandler /* USART1 */
+ .word USART2_IRQHandler /* USART2 */
+ .word 0 /* Reserved */
+ .word 0 /* Reserved */
+ .word USB_IRQHandler /* USB */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_IRQHandler
+ .thumb_set RCC_IRQHandler,Default_Handler
+
+ .weak EXTI0_1_IRQHandler
+ .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+ .weak EXTI2_3_IRQHandler
+ .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+ .weak EXTI4_15_IRQHandler
+ .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_3_IRQHandler
+ .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_5_IRQHandler
+ .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
+
+ .weak ADC1_IRQHandler
+ .thumb_set ADC1_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_UP_TRG_COM_IRQHandler
+ .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM14_IRQHandler
+ .thumb_set TIM14_IRQHandler,Default_Handler
+
+ .weak TIM16_IRQHandler
+ .thumb_set TIM16_IRQHandler,Default_Handler
+
+ .weak TIM17_IRQHandler
+ .thumb_set TIM17_IRQHandler,Default_Handler
+
+ .weak I2C1_IRQHandler
+ .thumb_set I2C1_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak USB_IRQHandler
+ .thumb_set USB_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/startup_code/startup_stm32f070xb.s b/f0/startup_code/startup_stm32f070xb.s
new file mode 100755
index 0000000000000000000000000000000000000000..a452d620aa6165e320093fe8560a2758474d8442
--- /dev/null
+++ b/f0/startup_code/startup_stm32f070xb.s
@@ -0,0 +1,296 @@
+/**
+ ******************************************************************************
+ * @file startup_stm32f070xb.s
+ * @author MCD Application Team
+ * @version V2.2.1
+ * @date 09-January-2015
+ * @brief STM32F070xb/STM32F070x8 devices vector table for Atollic TrueSTUDIO toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M0 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m0
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+ ldr r0, =_estack
+ mov sp, r0 /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+ movs r1, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r3, =_sidata
+ ldr r3, [r3, r1]
+ str r3, [r0, r1]
+ adds r1, r1, #4
+
+LoopCopyDataInit:
+ ldr r0, =_sdata
+ ldr r3, =_edata
+ adds r2, r0, r1
+ cmp r2, r3
+ bcc CopyDataInit
+ ldr r2, =_sbss
+ b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+ movs r3, #0
+ str r3, [r2]
+ adds r2, r2, #4
+
+
+LoopFillZerobss:
+ ldr r3, = _ebss
+ cmp r2, r3
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+
+LoopForever:
+ b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ *
+ * @param None
+ * @retval : None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word 0
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler /* Window WatchDog */
+ .word 0 /* Reserved */
+ .word RTC_IRQHandler /* RTC through the EXTI line */
+ .word FLASH_IRQHandler /* FLASH */
+ .word RCC_IRQHandler /* RCC */
+ .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
+ .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
+ .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
+ .word 0 /* Reserved */
+ .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
+ .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
+ .word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */
+ .word ADC1_IRQHandler /* ADC1 */
+ .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
+ .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
+ .word 0 /* Reserved */
+ .word TIM3_IRQHandler /* TIM3 */
+ .word TIM6_IRQHandler /* TIM6 */
+ .word TIM7_IRQHandler /* TIM7 */
+ .word TIM14_IRQHandler /* TIM14 */
+ .word TIM15_IRQHandler /* TIM15 */
+ .word TIM16_IRQHandler /* TIM16 */
+ .word TIM17_IRQHandler /* TIM17 */
+ .word I2C1_IRQHandler /* I2C1 */
+ .word I2C2_IRQHandler /* I2C2 */
+ .word SPI1_IRQHandler /* SPI1 */
+ .word SPI2_IRQHandler /* SPI2 */
+ .word USART1_IRQHandler /* USART1 */
+ .word USART2_IRQHandler /* USART2 */
+ .word USART3_4_IRQHandler /* USART3 and USART4 */
+ .word 0 /* Reserved */
+ .word USB_IRQHandler /* USB */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_IRQHandler
+ .thumb_set RCC_IRQHandler,Default_Handler
+
+ .weak EXTI0_1_IRQHandler
+ .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+ .weak EXTI2_3_IRQHandler
+ .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+ .weak EXTI4_15_IRQHandler
+ .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_3_IRQHandler
+ .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_5_IRQHandler
+ .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
+
+ .weak ADC1_IRQHandler
+ .thumb_set ADC1_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_UP_TRG_COM_IRQHandler
+ .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM6_IRQHandler
+ .thumb_set TIM6_IRQHandler,Default_Handler
+
+ .weak TIM7_IRQHandler
+ .thumb_set TIM7_IRQHandler,Default_Handler
+
+ .weak TIM14_IRQHandler
+ .thumb_set TIM14_IRQHandler,Default_Handler
+
+ .weak TIM15_IRQHandler
+ .thumb_set TIM15_IRQHandler,Default_Handler
+
+ .weak TIM16_IRQHandler
+ .thumb_set TIM16_IRQHandler,Default_Handler
+
+ .weak TIM17_IRQHandler
+ .thumb_set TIM17_IRQHandler,Default_Handler
+
+ .weak I2C1_IRQHandler
+ .thumb_set I2C1_IRQHandler,Default_Handler
+
+ .weak I2C2_IRQHandler
+ .thumb_set I2C2_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak SPI2_IRQHandler
+ .thumb_set SPI2_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak USART3_4_IRQHandler
+ .thumb_set USART3_4_IRQHandler,Default_Handler
+
+ .weak USB_IRQHandler
+ .thumb_set USB_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/startup_code/startup_stm32f071xb.s b/f0/startup_code/startup_stm32f071xb.s
new file mode 100755
index 0000000000000000000000000000000000000000..c2ab3d1d8cb1afa9f8a73c9109d83d9be900cfdb
--- /dev/null
+++ b/f0/startup_code/startup_stm32f071xb.s
@@ -0,0 +1,305 @@
+/**
+ ******************************************************************************
+ * @file startup_stm32f071xb.s
+ * @author MCD Application Team
+ * @version V2.2.1
+ * @date 09-January-2015
+ * @brief STM32F071x8/STM32F071xB devices vector table for Atollic TrueSTUDIO toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M0 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m0
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+ ldr r0, =_estack
+ mov sp, r0 /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+ movs r1, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r3, =_sidata
+ ldr r3, [r3, r1]
+ str r3, [r0, r1]
+ adds r1, r1, #4
+
+LoopCopyDataInit:
+ ldr r0, =_sdata
+ ldr r3, =_edata
+ adds r2, r0, r1
+ cmp r2, r3
+ bcc CopyDataInit
+ ldr r2, =_sbss
+ b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+ movs r3, #0
+ str r3, [r2]
+ adds r2, r2, #4
+
+
+LoopFillZerobss:
+ ldr r3, = _ebss
+ cmp r2, r3
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+
+LoopForever:
+ b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ *
+ * @param None
+ * @retval : None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word 0
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler /* Window WatchDog */
+ .word PVD_VDDIO2_IRQHandler /* PVD and VDDIO2 through EXTI Line detect */
+ .word RTC_IRQHandler /* RTC through the EXTI line */
+ .word FLASH_IRQHandler /* FLASH */
+ .word RCC_CRS_IRQHandler /* RCC and CRS */
+ .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
+ .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
+ .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
+ .word TSC_IRQHandler /* TSC */
+ .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
+ .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
+ .word DMA1_Channel4_5_6_7_IRQHandler /* DMA1 Channel 4, Channel 5, Channel 6 and Channel 7*/
+ .word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
+ .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
+ .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
+ .word TIM2_IRQHandler /* TIM2 */
+ .word TIM3_IRQHandler /* TIM3 */
+ .word TIM6_DAC_IRQHandler /* TIM6 and DAC */
+ .word TIM7_IRQHandler /* TIM7 */
+ .word TIM14_IRQHandler /* TIM14 */
+ .word TIM15_IRQHandler /* TIM15 */
+ .word TIM16_IRQHandler /* TIM16 */
+ .word TIM17_IRQHandler /* TIM17 */
+ .word I2C1_IRQHandler /* I2C1 */
+ .word I2C2_IRQHandler /* I2C2 */
+ .word SPI1_IRQHandler /* SPI1 */
+ .word SPI2_IRQHandler /* SPI2 */
+ .word USART1_IRQHandler /* USART1 */
+ .word USART2_IRQHandler /* USART2 */
+ .word USART3_4_IRQHandler /* USART3 and USART4 */
+ .word CEC_CAN_IRQHandler /* CEC and CAN */
+ .word 0 /* Reserved */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak PVD_VDDIO2_IRQHandler
+ .thumb_set PVD_VDDIO2_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_CRS_IRQHandler
+ .thumb_set RCC_CRS_IRQHandler,Default_Handler
+
+ .weak EXTI0_1_IRQHandler
+ .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+ .weak EXTI2_3_IRQHandler
+ .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+ .weak EXTI4_15_IRQHandler
+ .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+ .weak TSC_IRQHandler
+ .thumb_set TSC_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_3_IRQHandler
+ .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_5_6_7_IRQHandler
+ .thumb_set DMA1_Channel4_5_6_7_IRQHandler,Default_Handler
+
+ .weak ADC1_COMP_IRQHandler
+ .thumb_set ADC1_COMP_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_UP_TRG_COM_IRQHandler
+ .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM6_DAC_IRQHandler
+ .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+ .weak TIM7_IRQHandler
+ .thumb_set TIM7_IRQHandler,Default_Handler
+
+ .weak TIM14_IRQHandler
+ .thumb_set TIM14_IRQHandler,Default_Handler
+
+ .weak TIM15_IRQHandler
+ .thumb_set TIM15_IRQHandler,Default_Handler
+
+ .weak TIM16_IRQHandler
+ .thumb_set TIM16_IRQHandler,Default_Handler
+
+ .weak TIM17_IRQHandler
+ .thumb_set TIM17_IRQHandler,Default_Handler
+
+ .weak I2C1_IRQHandler
+ .thumb_set I2C1_IRQHandler,Default_Handler
+
+ .weak I2C2_IRQHandler
+ .thumb_set I2C2_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak SPI2_IRQHandler
+ .thumb_set SPI2_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak USART3_4_IRQHandler
+ .thumb_set USART3_4_IRQHandler,Default_Handler
+
+ .weak CEC_CAN_IRQHandler
+ .thumb_set CEC_CAN_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/startup_code/startup_stm32f072xb.s b/f0/startup_code/startup_stm32f072xb.s
new file mode 100755
index 0000000000000000000000000000000000000000..31b4c7f0cebbe6f153d0da76b4e6eb0372808dca
--- /dev/null
+++ b/f0/startup_code/startup_stm32f072xb.s
@@ -0,0 +1,308 @@
+/**
+ ******************************************************************************
+ * @file startup_stm32f072xb.s
+ * @author MCD Application Team
+ * @version V2.2.1
+ * @date 09-January-2015
+ * @brief STM32F072x8/STM32F072xB devices vector table for Atollic TrueSTUDIO toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M0 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m0
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+ ldr r0, =_estack
+ mov sp, r0 /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+ movs r1, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r3, =_sidata
+ ldr r3, [r3, r1]
+ str r3, [r0, r1]
+ adds r1, r1, #4
+
+LoopCopyDataInit:
+ ldr r0, =_sdata
+ ldr r3, =_edata
+ adds r2, r0, r1
+ cmp r2, r3
+ bcc CopyDataInit
+ ldr r2, =_sbss
+ b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+ movs r3, #0
+ str r3, [r2]
+ adds r2, r2, #4
+
+
+LoopFillZerobss:
+ ldr r3, = _ebss
+ cmp r2, r3
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+
+LoopForever:
+ b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ *
+ * @param None
+ * @retval : None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word 0
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler /* Window WatchDog */
+ .word PVD_VDDIO2_IRQHandler /* PVD and VDDIO2 through EXTI Line detect */
+ .word RTC_IRQHandler /* RTC through the EXTI line */
+ .word FLASH_IRQHandler /* FLASH */
+ .word RCC_CRS_IRQHandler /* RCC and CRS */
+ .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
+ .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
+ .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
+ .word TSC_IRQHandler /* TSC */
+ .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
+ .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
+ .word DMA1_Channel4_5_6_7_IRQHandler /* DMA1 Channel 4, Channel 5, Channel 6 and Channel 7*/
+ .word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
+ .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
+ .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
+ .word TIM2_IRQHandler /* TIM2 */
+ .word TIM3_IRQHandler /* TIM3 */
+ .word TIM6_DAC_IRQHandler /* TIM6 and DAC */
+ .word TIM7_IRQHandler /* TIM7 */
+ .word TIM14_IRQHandler /* TIM14 */
+ .word TIM15_IRQHandler /* TIM15 */
+ .word TIM16_IRQHandler /* TIM16 */
+ .word TIM17_IRQHandler /* TIM17 */
+ .word I2C1_IRQHandler /* I2C1 */
+ .word I2C2_IRQHandler /* I2C2 */
+ .word SPI1_IRQHandler /* SPI1 */
+ .word SPI2_IRQHandler /* SPI2 */
+ .word USART1_IRQHandler /* USART1 */
+ .word USART2_IRQHandler /* USART2 */
+ .word USART3_4_IRQHandler /* USART3 and USART4 */
+ .word CEC_CAN_IRQHandler /* CEC and CAN */
+ .word USB_IRQHandler /* USB */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak PVD_VDDIO2_IRQHandler
+ .thumb_set PVD_VDDIO2_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_CRS_IRQHandler
+ .thumb_set RCC_CRS_IRQHandler,Default_Handler
+
+ .weak EXTI0_1_IRQHandler
+ .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+ .weak EXTI2_3_IRQHandler
+ .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+ .weak EXTI4_15_IRQHandler
+ .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+ .weak TSC_IRQHandler
+ .thumb_set TSC_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_3_IRQHandler
+ .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_5_6_7_IRQHandler
+ .thumb_set DMA1_Channel4_5_6_7_IRQHandler,Default_Handler
+
+ .weak ADC1_COMP_IRQHandler
+ .thumb_set ADC1_COMP_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_UP_TRG_COM_IRQHandler
+ .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM6_DAC_IRQHandler
+ .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+ .weak TIM7_IRQHandler
+ .thumb_set TIM7_IRQHandler,Default_Handler
+
+ .weak TIM14_IRQHandler
+ .thumb_set TIM14_IRQHandler,Default_Handler
+
+ .weak TIM15_IRQHandler
+ .thumb_set TIM15_IRQHandler,Default_Handler
+
+ .weak TIM16_IRQHandler
+ .thumb_set TIM16_IRQHandler,Default_Handler
+
+ .weak TIM17_IRQHandler
+ .thumb_set TIM17_IRQHandler,Default_Handler
+
+ .weak I2C1_IRQHandler
+ .thumb_set I2C1_IRQHandler,Default_Handler
+
+ .weak I2C2_IRQHandler
+ .thumb_set I2C2_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak SPI2_IRQHandler
+ .thumb_set SPI2_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak USART3_4_IRQHandler
+ .thumb_set USART3_4_IRQHandler,Default_Handler
+
+ .weak CEC_CAN_IRQHandler
+ .thumb_set CEC_CAN_IRQHandler,Default_Handler
+
+ .weak USB_IRQHandler
+ .thumb_set USB_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/startup_code/startup_stm32f078xx.s b/f0/startup_code/startup_stm32f078xx.s
new file mode 100755
index 0000000000000000000000000000000000000000..919d23db047540309aed94bb1ce47039d3254bdf
--- /dev/null
+++ b/f0/startup_code/startup_stm32f078xx.s
@@ -0,0 +1,308 @@
+/**
+ ******************************************************************************
+ * @file startup_stm32f078xx.s
+ * @author MCD Application Team
+ * @version V2.2.1
+ * @date 09-January-2015
+ * @brief STM32F078xx devices vector table for Atollic TrueSTUDIO toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M0 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m0
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+ ldr r0, =_estack
+ mov sp, r0 /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+ movs r1, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r3, =_sidata
+ ldr r3, [r3, r1]
+ str r3, [r0, r1]
+ adds r1, r1, #4
+
+LoopCopyDataInit:
+ ldr r0, =_sdata
+ ldr r3, =_edata
+ adds r2, r0, r1
+ cmp r2, r3
+ bcc CopyDataInit
+ ldr r2, =_sbss
+ b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+ movs r3, #0
+ str r3, [r2]
+ adds r2, r2, #4
+
+
+LoopFillZerobss:
+ ldr r3, = _ebss
+ cmp r2, r3
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+
+LoopForever:
+ b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ *
+ * @param None
+ * @retval : None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word 0
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler /* Window WatchDog */
+ .word VDDIO2_IRQHandler /* VDDIO2 Monitor through EXTI Line 31 */
+ .word RTC_IRQHandler /* RTC through the EXTI line */
+ .word FLASH_IRQHandler /* FLASH */
+ .word RCC_CRS_IRQHandler /* RCC and CRS */
+ .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
+ .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
+ .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
+ .word TSC_IRQHandler /* TSC */
+ .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
+ .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
+ .word DMA1_Channel4_5_6_7_IRQHandler /* DMA1 Channel 4, Channel 5, Channel 6 and Channel 7*/
+ .word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
+ .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
+ .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
+ .word TIM2_IRQHandler /* TIM2 */
+ .word TIM3_IRQHandler /* TIM3 */
+ .word TIM6_DAC_IRQHandler /* TIM6 and DAC */
+ .word TIM7_IRQHandler /* TIM7 */
+ .word TIM14_IRQHandler /* TIM14 */
+ .word TIM15_IRQHandler /* TIM15 */
+ .word TIM16_IRQHandler /* TIM16 */
+ .word TIM17_IRQHandler /* TIM17 */
+ .word I2C1_IRQHandler /* I2C1 */
+ .word I2C2_IRQHandler /* I2C2 */
+ .word SPI1_IRQHandler /* SPI1 */
+ .word SPI2_IRQHandler /* SPI2 */
+ .word USART1_IRQHandler /* USART1 */
+ .word USART2_IRQHandler /* USART2 */
+ .word USART3_4_IRQHandler /* USART3 and USART4 */
+ .word CEC_CAN_IRQHandler /* CEC and CAN */
+ .word USB_IRQHandler /* USB */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak VDDIO2_IRQHandler
+ .thumb_set VDDIO2_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_CRS_IRQHandler
+ .thumb_set RCC_CRS_IRQHandler,Default_Handler
+
+ .weak EXTI0_1_IRQHandler
+ .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+ .weak EXTI2_3_IRQHandler
+ .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+ .weak EXTI4_15_IRQHandler
+ .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+ .weak TSC_IRQHandler
+ .thumb_set TSC_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_3_IRQHandler
+ .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_5_6_7_IRQHandler
+ .thumb_set DMA1_Channel4_5_6_7_IRQHandler,Default_Handler
+
+ .weak ADC1_COMP_IRQHandler
+ .thumb_set ADC1_COMP_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_UP_TRG_COM_IRQHandler
+ .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM6_DAC_IRQHandler
+ .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+ .weak TIM7_IRQHandler
+ .thumb_set TIM7_IRQHandler,Default_Handler
+
+ .weak TIM14_IRQHandler
+ .thumb_set TIM14_IRQHandler,Default_Handler
+
+ .weak TIM15_IRQHandler
+ .thumb_set TIM15_IRQHandler,Default_Handler
+
+ .weak TIM16_IRQHandler
+ .thumb_set TIM16_IRQHandler,Default_Handler
+
+ .weak TIM17_IRQHandler
+ .thumb_set TIM17_IRQHandler,Default_Handler
+
+ .weak I2C1_IRQHandler
+ .thumb_set I2C1_IRQHandler,Default_Handler
+
+ .weak I2C2_IRQHandler
+ .thumb_set I2C2_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak SPI2_IRQHandler
+ .thumb_set SPI2_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak USART3_4_IRQHandler
+ .thumb_set USART3_4_IRQHandler,Default_Handler
+
+ .weak CEC_CAN_IRQHandler
+ .thumb_set CEC_CAN_IRQHandler,Default_Handler
+
+ .weak USB_IRQHandler
+ .thumb_set USB_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/startup_code/startup_stm32f091xc.s b/f0/startup_code/startup_stm32f091xc.s
new file mode 100755
index 0000000000000000000000000000000000000000..9d681f13f223747230de3c9d69a37e5896bc0962
--- /dev/null
+++ b/f0/startup_code/startup_stm32f091xc.s
@@ -0,0 +1,304 @@
+/**
+ ******************************************************************************
+ * @file startup_stm32f091xc.s
+ * @author MCD Application Team
+ * @version V2.2.1
+ * @date 09-January-2015
+ * @brief STM32F091xC devices vector table for Atollic TrueSTUDIO toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M0 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m0
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+ ldr r0, =_estack
+ mov sp, r0 /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+ movs r1, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r3, =_sidata
+ ldr r3, [r3, r1]
+ str r3, [r0, r1]
+ adds r1, r1, #4
+
+LoopCopyDataInit:
+ ldr r0, =_sdata
+ ldr r3, =_edata
+ adds r2, r0, r1
+ cmp r2, r3
+ bcc CopyDataInit
+ ldr r2, =_sbss
+ b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+ movs r3, #0
+ str r3, [r2]
+ adds r2, r2, #4
+
+
+LoopFillZerobss:
+ ldr r3, = _ebss
+ cmp r2, r3
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+
+LoopForever:
+ b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ *
+ * @param None
+ * @retval : None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word 0
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler /* Window WatchDog */
+ .word PVD_VDDIO2_IRQHandler /* PVD and VDDIO2 through EXTI Line detect */
+ .word RTC_IRQHandler /* RTC through the EXTI line */
+ .word FLASH_IRQHandler /* FLASH */
+ .word RCC_CRS_IRQHandler /* RCC and CRS */
+ .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
+ .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
+ .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
+ .word TSC_IRQHandler /* TSC */
+ .word DMA1_Ch1_IRQHandler /* DMA1 Channel 1 */
+ .word DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler /* DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2 */
+ .word DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler /* DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5 */
+ .word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
+ .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
+ .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
+ .word TIM2_IRQHandler /* TIM2 */
+ .word TIM3_IRQHandler /* TIM3 */
+ .word TIM6_DAC_IRQHandler /* TIM6 and DAC */
+ .word TIM7_IRQHandler /* TIM7 */
+ .word TIM14_IRQHandler /* TIM14 */
+ .word TIM15_IRQHandler /* TIM15 */
+ .word TIM16_IRQHandler /* TIM16 */
+ .word TIM17_IRQHandler /* TIM17 */
+ .word I2C1_IRQHandler /* I2C1 */
+ .word I2C2_IRQHandler /* I2C2 */
+ .word SPI1_IRQHandler /* SPI1 */
+ .word SPI2_IRQHandler /* SPI2 */
+ .word USART1_IRQHandler /* USART1 */
+ .word USART2_IRQHandler /* USART2 */
+ .word USART3_8_IRQHandler /* USART3, USART4, USART5, USART6, USART7, USART8 */
+ .word CEC_CAN_IRQHandler /* CEC and CAN */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak PVD_VDDIO2_IRQHandler
+ .thumb_set PVD_VDDIO2_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_CRS_IRQHandler
+ .thumb_set RCC_CRS_IRQHandler,Default_Handler
+
+ .weak EXTI0_1_IRQHandler
+ .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+ .weak EXTI2_3_IRQHandler
+ .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+ .weak EXTI4_15_IRQHandler
+ .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+ .weak TSC_IRQHandler
+ .thumb_set TSC_IRQHandler,Default_Handler
+
+ .weak DMA1_Ch1_IRQHandler
+ .thumb_set DMA1_Ch1_IRQHandler,Default_Handler
+
+ .weak DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
+ .thumb_set DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler,Default_Handler
+
+ .weak DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
+ .thumb_set DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler,Default_Handler
+
+ .weak ADC1_COMP_IRQHandler
+ .thumb_set ADC1_COMP_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_UP_TRG_COM_IRQHandler
+ .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM6_DAC_IRQHandler
+ .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+ .weak TIM7_IRQHandler
+ .thumb_set TIM7_IRQHandler,Default_Handler
+
+ .weak TIM14_IRQHandler
+ .thumb_set TIM14_IRQHandler,Default_Handler
+
+ .weak TIM15_IRQHandler
+ .thumb_set TIM15_IRQHandler,Default_Handler
+
+ .weak TIM16_IRQHandler
+ .thumb_set TIM16_IRQHandler,Default_Handler
+
+ .weak TIM17_IRQHandler
+ .thumb_set TIM17_IRQHandler,Default_Handler
+
+ .weak I2C1_IRQHandler
+ .thumb_set I2C1_IRQHandler,Default_Handler
+
+ .weak I2C2_IRQHandler
+ .thumb_set I2C2_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak SPI2_IRQHandler
+ .thumb_set SPI2_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak USART3_8_IRQHandler
+ .thumb_set USART3_8_IRQHandler,Default_Handler
+
+ .weak CEC_CAN_IRQHandler
+ .thumb_set CEC_CAN_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/startup_code/startup_stm32f098xx.s b/f0/startup_code/startup_stm32f098xx.s
new file mode 100755
index 0000000000000000000000000000000000000000..e8120c332ad399be5d47ba074fe814ad72e4b92d
--- /dev/null
+++ b/f0/startup_code/startup_stm32f098xx.s
@@ -0,0 +1,304 @@
+/**
+ ******************************************************************************
+ * @file startup_stm32f098xx.s
+ * @author MCD Application Team
+ * @version V2.2.1
+ * @date 09-January-2015
+ * @brief STM32F098xx devices vector table for Atollic TrueSTUDIO toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M0 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m0
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+ ldr r0, =_estack
+ mov sp, r0 /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+ movs r1, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r3, =_sidata
+ ldr r3, [r3, r1]
+ str r3, [r0, r1]
+ adds r1, r1, #4
+
+LoopCopyDataInit:
+ ldr r0, =_sdata
+ ldr r3, =_edata
+ adds r2, r0, r1
+ cmp r2, r3
+ bcc CopyDataInit
+ ldr r2, =_sbss
+ b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+ movs r3, #0
+ str r3, [r2]
+ adds r2, r2, #4
+
+
+LoopFillZerobss:
+ ldr r3, = _ebss
+ cmp r2, r3
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+
+LoopForever:
+ b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ *
+ * @param None
+ * @retval : None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word 0
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler /* Window WatchDog */
+ .word VDDIO2_IRQHandler /* VDDIO2 Monitor through EXTI Line 31 */
+ .word RTC_IRQHandler /* RTC through the EXTI line */
+ .word FLASH_IRQHandler /* FLASH */
+ .word RCC_CRS_IRQHandler /* RCC and CRS */
+ .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
+ .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
+ .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
+ .word TSC_IRQHandler /* TSC */
+ .word DMA1_Ch1_IRQHandler /* DMA1 Channel 1 */
+ .word DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler /* DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2 */
+ .word DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler /* DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5 */
+ .word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
+ .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
+ .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
+ .word TIM2_IRQHandler /* TIM2 */
+ .word TIM3_IRQHandler /* TIM3 */
+ .word TIM6_DAC_IRQHandler /* TIM6 and DAC */
+ .word TIM7_IRQHandler /* TIM7 */
+ .word TIM14_IRQHandler /* TIM14 */
+ .word TIM15_IRQHandler /* TIM15 */
+ .word TIM16_IRQHandler /* TIM16 */
+ .word TIM17_IRQHandler /* TIM17 */
+ .word I2C1_IRQHandler /* I2C1 */
+ .word I2C2_IRQHandler /* I2C2 */
+ .word SPI1_IRQHandler /* SPI1 */
+ .word SPI2_IRQHandler /* SPI2 */
+ .word USART1_IRQHandler /* USART1 */
+ .word USART2_IRQHandler /* USART2 */
+ .word USART3_8_IRQHandler /* USART3, USART4, USART5, USART6, USART7, USART8 */
+ .word CEC_CAN_IRQHandler /* CEC and CAN */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak VDDIO2_IRQHandler
+ .thumb_set VDDIO2_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_CRS_IRQHandler
+ .thumb_set RCC_CRS_IRQHandler,Default_Handler
+
+ .weak EXTI0_1_IRQHandler
+ .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+ .weak EXTI2_3_IRQHandler
+ .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+ .weak EXTI4_15_IRQHandler
+ .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+ .weak TSC_IRQHandler
+ .thumb_set TSC_IRQHandler,Default_Handler
+
+ .weak DMA1_Ch1_IRQHandler
+ .thumb_set DMA1_Ch1_IRQHandler,Default_Handler
+
+ .weak DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
+ .thumb_set DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler,Default_Handler
+
+ .weak DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
+ .thumb_set DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler,Default_Handler
+
+ .weak ADC1_COMP_IRQHandler
+ .thumb_set ADC1_COMP_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_UP_TRG_COM_IRQHandler
+ .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM6_DAC_IRQHandler
+ .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+ .weak TIM7_IRQHandler
+ .thumb_set TIM7_IRQHandler,Default_Handler
+
+ .weak TIM14_IRQHandler
+ .thumb_set TIM14_IRQHandler,Default_Handler
+
+ .weak TIM15_IRQHandler
+ .thumb_set TIM15_IRQHandler,Default_Handler
+
+ .weak TIM16_IRQHandler
+ .thumb_set TIM16_IRQHandler,Default_Handler
+
+ .weak TIM17_IRQHandler
+ .thumb_set TIM17_IRQHandler,Default_Handler
+
+ .weak I2C1_IRQHandler
+ .thumb_set I2C1_IRQHandler,Default_Handler
+
+ .weak I2C2_IRQHandler
+ .thumb_set I2C2_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak SPI2_IRQHandler
+ .thumb_set SPI2_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak USART3_8_IRQHandler
+ .thumb_set USART3_8_IRQHandler,Default_Handler
+
+ .weak CEC_CAN_IRQHandler
+ .thumb_set CEC_CAN_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/stm32f0xx_hal_conf_template.h b/f0/stm32f0xx_hal_conf_template.h
new file mode 100755
index 0000000000000000000000000000000000000000..ec7efbf5c1972e7c3d0f10792354cd5a85b0d129
--- /dev/null
+++ b/f0/stm32f0xx_hal_conf_template.h
@@ -0,0 +1,307 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_conf_template.h
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief HAL configuration file.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_CONF_H
+#define __STM32F0xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+ * @brief This is the list of modules to be used in the HAL driver
+ */
+#define HAL_MODULE_ENABLED
+#define HAL_ADC_MODULE_ENABLED
+#define HAL_CAN_MODULE_ENABLED
+#define HAL_CEC_MODULE_ENABLED
+#define HAL_COMP_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_CRC_MODULE_ENABLED
+#define HAL_DAC_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+#define HAL_I2S_MODULE_ENABLED
+#define HAL_IRDA_MODULE_ENABLED
+#define HAL_IWDG_MODULE_ENABLED
+#define HAL_PCD_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_RTC_MODULE_ENABLED
+#define HAL_SMARTCARD_MODULE_ENABLED
+#define HAL_SMBUS_MODULE_ENABLED
+#define HAL_SPI_MODULE_ENABLED
+#define HAL_TIM_MODULE_ENABLED
+#define HAL_TSC_MODULE_ENABLED
+#define HAL_UART_MODULE_ENABLED
+#define HAL_USART_MODULE_ENABLED
+#define HAL_WWDG_MODULE_ENABLED
+
+/* ######################### Oscillator Values adaptation ################### */
+/**
+ * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSE is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+/**
+ * @brief In the following line adjust the External High Speed oscillator (HSE) Startup
+ * Timeout value
+ */
+#if !defined (HSE_STARTUP_TIMEOUT)
+ #define HSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+ * @brief Internal High Speed oscillator (HSI) value.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSI is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE ((uint32_t)8000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+ * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup
+ * Timeout value
+ */
+#if !defined (HSI_STARTUP_TIMEOUT)
+ #define HSI_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for HSI start up */
+#endif /* HSI_STARTUP_TIMEOUT */
+
+/**
+ * @brief Internal High Speed oscillator for ADC (HSI14) value.
+ */
+#if !defined (HSI14_VALUE)
+#define HSI14_VALUE ((uint32_t)14000000) /*!< Value of the Internal High Speed oscillator for ADC in Hz.
+ The real value may vary depending on the variations
+ in voltage and temperature. */
+#endif /* HSI14_VALUE */
+
+/**
+ * @brief Internal High Speed oscillator for USB (HSI48) value.
+ */
+#if !defined (HSI48_VALUE)
+#define HSI48_VALUE ((uint32_t)48000000) /*!< Value of the Internal High Speed oscillator for USB in Hz.
+ The real value may vary depending on the variations
+ in voltage and temperature. */
+#endif /* HSI48_VALUE */
+
+/**
+ * @brief Internal Low Speed oscillator (LSI) value.
+ */
+#if !defined (LSI_VALUE)
+ #define LSI_VALUE ((uint32_t)40000)
+#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
+ The real value may vary depending on the variations
+ in voltage and temperature. */
+/**
+ * @brief External Low Speed oscillator (LSE) value.
+ */
+#if !defined (LSE_VALUE)
+ #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External Low Speed oscillator in Hz */
+#endif /* LSE_VALUE */
+
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+ === you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+ * @brief This is the HAL system configuration section
+ */
+#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */
+#define TICK_INT_PRIORITY ((uint32_t)(1<<__NVIC_PRIO_BITS) - 1) /*!< tick interrupt priority (lowest by default) */
+ /* Warning: Must be set to higher priority for HAL_Delay() */
+ /* and HAL_GetTick() usage under interrupt context */
+#define USE_RTOS 0
+#define PREFETCH_ENABLE 1
+#define INSTRUCTION_CACHE_ENABLE 0
+#define DATA_CACHE_ENABLE 0
+
+/* ########################## Assert Selection ############################## */
+/**
+ * @brief Uncomment the line below to expanse the "assert_param" macro in the
+ * HAL drivers code
+ */
+/*#define USE_FULL_ASSERT 1*/
+
+/* Includes ------------------------------------------------------------------*/
+/**
+ * @brief Include module's header file
+ */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+ #include "stm32f0xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+ #include "stm32f0xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+ #include "stm32f0xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+ #include "stm32f0xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+ #include "stm32f0xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+ #include "stm32f0xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+ #include "stm32f0xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_COMP_MODULE_ENABLED
+ #include "stm32f0xx_hal_comp.h"
+#endif /* HAL_COMP_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+ #include "stm32f0xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+ #include "stm32f0xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+ #include "stm32f0xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32f0xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32f0xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32f0xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32f0xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32f0xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32f0xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32f0xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32f0xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+ #include "stm32f0xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32f0xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32f0xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_TSC_MODULE_ENABLED
+ #include "stm32f0xx_hal_tsc.h"
+#endif /* HAL_TSC_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32f0xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32f0xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32f0xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef USE_FULL_ASSERT
+/**
+ * @brief The assert_param macro is used for function's parameters check.
+ * @param expr: If expr is false, it calls assert_failed function
+ * which reports the name of the source file and the source
+ * line number of the call that failed.
+ * If expr is true, it returns no value.
+ * @retval None
+ */
+ #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+ void assert_failed(uint8_t* file, uint32_t line);
+#else
+ #define assert_param(expr) ((void)0)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_CONF_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/f0/stm32f0xx_hal_msp_template.c b/f0/stm32f0xx_hal_msp_template.c
new file mode 100755
index 0000000000000000000000000000000000000000..b055365b6101238b2955ac596f395a46fdb143c3
--- /dev/null
+++ b/f0/stm32f0xx_hal_msp_template.c
@@ -0,0 +1,129 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_msp_template.c
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 09-January-2015
+ * @brief HAL MSP module.
+ * This file template is located in the HAL folder and should be copied
+ * to the user folder.
+ *
+ @verbatim
+ ===============================================================================
+ ##### How to use this driver #####
+ ===============================================================================
+ [..]
+ This file is generated automatically by MicroXplorer and eventually modified
+ by the user
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup HAL_MSP HAL MSP module driver
+ * @brief HAL MSP module.
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup HAL_MSP_Private_Functions HAL MSP Private Functions
+ * @{
+ */
+
+/**
+ * @brief Initializes the Global MSP.
+ * @retval None
+ */
+void HAL_MspInit(void)
+{
+ /* NOTE : This function is generated automatically by MicroXplorer and eventually
+ modified by the user
+ */
+}
+
+/**
+ * @brief DeInitializes the Global MSP.
+ * @retval None
+ */
+void HAL_MspDeInit(void)
+{
+ /* NOTE : This function is generated automatically by MicroXplorer and eventually
+ modified by the user
+ */
+}
+
+/**
+ * @brief Initializes the PPP MSP.
+ * @retval None
+ */
+void HAL_PPP_MspInit(void)
+{
+ /* NOTE : This function is generated automatically by MicroXplorer and eventually
+ modified by the user
+ */
+}
+
+/**
+ * @brief DeInitializes the PPP MSP.
+ * @retval None
+ */
+void HAL_PPP_MspDeInit(void)
+{
+ /* NOTE : This function is generated automatically by MicroXplorer and eventually
+ modified by the user
+ */
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/